diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt index ded0398d3bdc..a4873e5e3e36 100644 --- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -3,17 +3,58 @@ Required properties: - compatible : Should be "fsl,-dma-apbh" or "fsl,-dma-apbx" - reg : Should contain registers location and length +- interrupts : Should contain the interrupt numbers of DMA channels. + If a channel is empty/reserved, 0 should be filled in place. +- #dma-cells : Must be <1>. The number cell specifies the channel ID. +- dma-channels : Number of channels supported by the DMA controller + +Optional properties: +- interrupt-names : Name of DMA channel interrupts Supported chips: imx23, imx28. Examples: -dma-apbh@80004000 { + +dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; + interrupts = <82 83 84 85 + 88 88 88 88 + 88 88 88 88 + 87 86 0 0>; + interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", + "gpmi0", "gmpi1", "gpmi2", "gmpi3", + "gpmi4", "gmpi5", "gpmi6", "gmpi7", + "hsadc", "lcdif", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; }; -dma-apbx@80024000 { +dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; + interrupts = <78 79 66 0 + 80 81 68 69 + 70 71 72 73 + 74 75 76 77>; + interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + "saif0", "saif1", "i2c0", "i2c1", + "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", + "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; + #dma-cells = <1>; + dma-channels = <16>; +}; + +DMA clients connected to the MXS DMA controller must use the format +described in the dma.txt file. + +Examples: + +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt index b41e5e52a676..96ec5179c8a0 100644 --- a/Documentation/devicetree/bindings/fb/mxsfb.txt +++ b/Documentation/devicetree/bindings/fb/mxsfb.txt @@ -5,9 +5,16 @@ Required properties: imx23 and imx28. - reg: Address and length of the register set for lcdif - interrupts: Should contain lcdif interrupts +- display : phandle to display node (see below for details) -Optional properties: -- panel-enable-gpios : Should specify the gpio for panel enable +* display node + +Required properties: +- bits-per-pixel : <16> for RGB565, <32> for RGB888/666. +- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>. + +Required sub-node: +- display-timings : Refer to binding doc display-timing.txt for details. Examples: @@ -15,5 +22,28 @@ lcdif@80030000 { compatible = "fsl,imx28-lcdif"; reg = <0x80030000 2000>; interrupts = <38 86>; - panel-enable-gpios = <&gpio3 30 0>; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <164>; + hback-porch = <89>; + hsync-len = <10>; + vback-porch = <23>; + vfront-porch = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt index 7a3fe9e5f4cb..4e1c8ac01eba 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -3,10 +3,13 @@ Required properties: - compatible: Should be "fsl,-i2c" - reg: Should contain registers location and length -- interrupts: Should contain ERROR and DMA interrupts +- interrupts: Should contain ERROR interrupt number - clock-frequency: Desired I2C bus clock frequency in Hz. Only 100000Hz and 400000Hz modes are supported. -- fsl,i2c-dma-channel: APBX DMA channel for the I2C +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and I2C DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Examples: @@ -15,7 +18,8 @@ i2c0: i2c@80058000 { #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x80058000 2000>; - interrupts = <111 68>; + interrupts = <111>; clock-frequency = <100000>; - fsl,i2c-dma-channel = <6>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; }; diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt index 54949f6faede..515addc20070 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -9,15 +9,19 @@ and the properties used by the mxsmmc driver. Required properties: - compatible: Should be "fsl,-mmc". The supported chips include imx23 and imx28. -- interrupts: Should contain ERROR and DMA interrupts -- fsl,ssp-dma-channel: APBH DMA channel for the SSP +- interrupts: Should contain ERROR interrupt number +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and SSP DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Examples: ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; reg = <0x80010000 2000>; - interrupts = <96 82>; - fsl,ssp-dma-channel = <0>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index 3fb3f9015365..551b2a179d01 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -7,10 +7,12 @@ Required properties: - compatible : should be "fsl,-gpmi-nand" - reg : should contain registers location and length for gpmi and bch. - reg-names: Should contain the reg names "gpmi-nand" and "bch" - - interrupts : The first is the DMA interrupt number for GPMI. - The second is the BCH interrupt number. - - interrupt-names : The interrupt names "gpmi-dma", "bch"; - - fsl,gpmi-dma-channel : Should contain the dma channel it uses. + - interrupts : BCH interrupt number. + - interrupt-names : Should be "bch". + - dmas: DMA specifier, consisting of a phandle to DMA controller node + and GPMI DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. + - dma-names: Must be "rx-tx". Optional properties: - nand-on-flash-bbt: boolean to enable on flash bbt option if not @@ -27,9 +29,10 @@ gpmi-nand@8000c000 { #size-cells = <1>; reg = <0x8000c000 2000>, <0x8000a000 2000>; reg-names = "gpmi-nand", "bch"; - interrupts = <88>, <41>; - interrupt-names = "gpmi-dma", "bch"; - fsl,gpmi-dma-channel = <4>; + interrupts = <41>; + interrupt-names = "bch"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; partition@0 { ... diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt index f7e8e8f4d9a3..3077370c89af 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt @@ -70,6 +70,10 @@ Optional subnode-properties: 0: Disable the internal pull-up 1: Enable the internal pull-up +Note that when enabling the pull-up, the internal pad keeper gets disabled. +Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up +will only disable the internal pad keeper. + Examples: pinctrl@80018000 { diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt index e2e13957c2a4..3499b73293c2 100644 --- a/Documentation/devicetree/bindings/spi/mxs-spi.txt +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt @@ -3,8 +3,11 @@ Required properties: - compatible: Should be "fsl,-spi", where soc is "imx23" or "imx28" - reg: Offset and length of the register set for the device -- interrupts: Should contain SSP interrupts (error irq first, dma irq second) -- fsl,ssp-dma-channel: APBX DMA channel for the SSP +- interrupts: Should contain SSP ERROR interrupt +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and SSP DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Optional properties: - clock-frequency : Input clock frequency to the SPI block in Hz. @@ -17,6 +20,7 @@ ssp0: ssp@80010000 { #size-cells = <0>; compatible = "fsl,imx28-spi"; reg = <0x80010000 0x2000>; - interrupts = <96 82>; - fsl,ssp-dma-channel = <0>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; }; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt index 273a8d5b3300..2c00ec64628e 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt @@ -5,20 +5,18 @@ Required properties: imx23 and imx28. - reg : Address and length of the register set for the device - interrupts : Should contain the auart interrupt numbers - -Optional properties: -- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other - is for TX. If you add this property, it also means that you - will enable the DMA support for the auart. - Note: due to the hardware bug in imx23(see errata : 2836), - only the imx28 can enable the DMA support for the auart. +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and AUART DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: "rx" for RX channel, "tx" for TX channel. Example: auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; - fsl,auart-dma-channel = <8 9>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; }; Note: Each auart port should have an alias correctly numbered in "aliases" diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 035c13f9d3c0..da0588a04131 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -59,8 +59,33 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; - panel-enable-gpios = <&gpio1 18 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hback-porch = <15>; + hfront-porch = <8>; + vback-porch = <12>; + vfront-porch = <4>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; @@ -95,6 +120,15 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio1 29 0>; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 0>; + enable-active-high; + }; }; backlight { diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index e7484e4ea659..d107c4af321f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -29,6 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; bus-width = <4>; + broken-cd; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index ad2d79324cd3..73fd7d0887b5 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -49,9 +49,15 @@ reg = <0x80000000 0x2000>; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <0 14 20 0 + 13 13 13 13>; + interrupt-names = "empty", "ssp0", "ssp1", "empty", + "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <8>; clocks = <&clks 15>; }; @@ -70,6 +76,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -78,6 +86,8 @@ reg = <0x80010000 0x2000>; interrupts = <15 14>; clocks = <&clks 33>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -305,9 +315,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <7 5 9 26 + 19 0 25 23 + 60 58 9 0 + 0 0 0 0>; + interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c", + "saif0", "empty", "auart0-rx", "auart0-tx", + "auart1-rx", "auart1-tx", "saif1", "empty", + "empty", "empty", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 16>; }; @@ -344,6 +364,8 @@ reg = <0x80034000 0x2000>; interrupts = <2 20>; clocks = <&clks 33>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -369,6 +391,8 @@ saif0: saif@80042000 { reg = <0x80042000 0x2000>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -379,16 +403,22 @@ saif1: saif@80046000 { reg = <0x80046000 0x2000>; + dmas = <&dma_apbx 10>; + dma-names = "rx-tx"; status = "disabled"; }; audio-out@80048000 { reg = <0x80048000 0x2000>; + dmas = <&dma_apbx 1>; + dma-names = "tx"; status = "disabled"; }; audio-in@8004c000 { reg = <0x8004c000 0x2000>; + dmas = <&dma_apbx 0>; + dma-names = "rx"; status = "disabled"; }; @@ -401,11 +431,15 @@ spdif@80054000 { reg = <0x80054000 2000>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; i2c@80058000 { reg = <0x80058000 0x2000>; + dmas = <&dma_apbx 3>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -436,6 +470,8 @@ reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; + dmas = <&dma_apbx 6>, <&dma_apbx 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -444,6 +480,8 @@ reg = <0x8006e000 0x2000>; interrupts = <59 60 58>; clocks = <&clks 32>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 6d8865bfb4b7..3d905d16cbec 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -72,7 +72,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 5171667a7763..43bf3c796cba 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -94,7 +94,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a0d3e9f1738e..063e62059890 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -30,7 +30,6 @@ reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ - 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ @@ -120,13 +119,48 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <0>; /* 0 will enable the keeper */ + }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; }; @@ -183,6 +217,11 @@ usbphy1: usbphy@8007e000 { status = "okay"; }; + + lradc@80050000 { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + }; }; }; @@ -304,5 +343,14 @@ pwms = <&pwm 3 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + + }; + + onewire@0 { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&w1_gpio_pins>; + status = "okay"; + gpios = <&gpio1 21 0>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 2da316e04409..3637bf3b1d59 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -123,8 +123,33 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; - panel-enable-gpios = <&gpio3 30 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; can0: can@80032000 { @@ -285,6 +310,15 @@ gpio = <&gpio3 8 0>; enable-active-high; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 6ce3d17c3a29..5f0ba99aa809 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -119,7 +119,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; can0: can@80032000 { @@ -221,6 +246,8 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 64af2381c1b0..600f7cb51f3e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -61,12 +61,24 @@ hsadc@80002000 { reg = <0x80002000 0x2000>; interrupts = <13 87>; + dmas = <&dma_apbh 12>; + dma-names = "rx"; status = "disabled"; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <82 83 84 85 + 88 88 88 88 + 88 88 88 88 + 87 86 0 0>; + interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", + "gpmi0", "gmpi1", "gpmi2", "gmpi3", + "gpmi4", "gmpi5", "gpmi6", "gmpi7", + "hsadc", "lcdif", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 25>; }; @@ -86,6 +98,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -96,6 +110,8 @@ reg = <0x80010000 0x2000>; interrupts = <96 82>; clocks = <&clks 46>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <0>; status = "disabled"; }; @@ -106,6 +122,8 @@ reg = <0x80012000 0x2000>; interrupts = <97 83>; clocks = <&clks 47>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -116,6 +134,8 @@ reg = <0x80014000 0x2000>; interrupts = <98 84>; clocks = <&clks 48>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -126,6 +146,8 @@ reg = <0x80016000 0x2000>; interrupts = <99 85>; clocks = <&clks 49>; + dmas = <&dma_apbh 3>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <3>; status = "disabled"; }; @@ -658,9 +680,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <78 79 66 0 + 80 81 68 69 + 70 71 72 73 + 74 75 76 77>; + interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + "saif0", "saif1", "i2c0", "i2c1", + "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", + "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 26>; }; @@ -692,6 +724,8 @@ reg = <0x80030000 0x2000>; interrupts = <38 86>; clocks = <&clks 55>; + dmas = <&dma_apbh 13>; + dma-names = "rx"; status = "disabled"; }; @@ -767,6 +801,8 @@ reg = <0x80042000 0x2000>; interrupts = <59 80>; clocks = <&clks 53>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <4>; status = "disabled"; }; @@ -781,6 +817,8 @@ reg = <0x80046000 0x2000>; interrupts = <58 81>; clocks = <&clks 54>; + dmas = <&dma_apbx 5>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <5>; status = "disabled"; }; @@ -796,6 +834,8 @@ spdif@80054000 { reg = <0x80054000 0x2000>; interrupts = <45 66>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; @@ -812,6 +852,8 @@ reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -823,6 +865,8 @@ reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; + dmas = <&dma_apbx 7>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <7>; status = "disabled"; }; @@ -847,6 +891,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; @@ -856,6 +902,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; + dmas = <&dma_apbx 10>, <&dma_apbx 11>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -864,6 +912,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; + dmas = <&dma_apbx 12>, <&dma_apbx 13>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -872,6 +922,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; + dmas = <&dma_apbx 14>, <&dma_apbx 15>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -880,6 +932,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; + dmas = <&dma_apbx 0>, <&dma_apbx 1>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -943,8 +997,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; + clocks = <&clks 57>, <&clks 57>, <&clks 64>; + clock-names = "ipg", "ahb", "enet_out"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 06ec460b4581..59e970f74e8f 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -65,9 +65,13 @@ interrupt-parent = <&intc>; ranges; - dma-apbh@00110000 { + dma_apbh: dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; + interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; clocks = <&clks 106>; }; @@ -83,6 +87,8 @@ <&clks 150>, <&clks 149>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <0>; status = "disabled"; }; diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 16870bf853b8..f39ab808694d 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -59,106 +58,6 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg) __raw_writel(mask, reg + MXS_TOG_ADDR); } -static struct fb_videomode mx23evk_video_modes[] = { - { - .name = "Samsung-LMS430HF02", - .refresh = 60, - .xres = 480, - .yres = 272, - .pixclock = 108096, /* picosecond (9.2 MHz) */ - .left_margin = 15, - .right_margin = 8, - .upper_margin = 12, - .lower_margin = 4, - .hsync_len = 1, - .vsync_len = 1, - }, -}; - -static struct fb_videomode mx28evk_video_modes[] = { - { - .name = "Seiko-43WVF1G", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 29851, /* picosecond (33.5 MHz) */ - .left_margin = 89, - .right_margin = 164, - .upper_margin = 23, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 10, - }, -}; - -static struct fb_videomode m28evk_video_modes[] = { - { - .name = "Ampire AM-800480R2TMQW-T01H", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30066, /* picosecond (33.26 MHz) */ - .left_margin = 0, - .right_margin = 256, - .upper_margin = 0, - .lower_margin = 45, - .hsync_len = 1, - .vsync_len = 1, - }, -}; - -static struct fb_videomode apx4devkit_video_modes[] = { - { - .name = "HannStar PJ70112A", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 33333, /* picosecond (30.00 MHz) */ - .left_margin = 88, - .right_margin = 40, - .upper_margin = 32, - .lower_margin = 13, - .hsync_len = 48, - .vsync_len = 3, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - }, -}; - -static struct fb_videomode apf28dev_video_modes[] = { - { - .name = "LW700", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30303, /* picosecond */ - .left_margin = 96, - .right_margin = 96, /* at least 3 & 1 */ - .upper_margin = 0x14, - .lower_margin = 0x15, - .hsync_len = 64, - .vsync_len = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - }, -}; - -static struct fb_videomode cfa10049_video_modes[] = { - { - .name = "Himax HX8357-B", - .refresh = 60, - .xres = 320, - .yres = 480, - .pixclock = 108506, /* picosecond (9.216 MHz) */ - .left_margin = 2, - .right_margin = 2, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 15, - .vsync_len = 15, - }, -}; - -static struct mxsfb_platform_data mxsfb_pdata __initdata; - /* * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers */ @@ -189,8 +88,6 @@ static void mx28evk_flexcan1_switch(int enable) static struct flexcan_platform_data flexcan_pdata[2]; static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata), - OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata), OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]), OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]), { /* sentinel */ } @@ -340,16 +237,6 @@ static void __init update_fec_mac_prop(enum mac_oui oui) } } -static void __init imx23_evk_init(void) -{ - mxsfb_pdata.mode_list = mx23evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; -} - static inline void enable_clk_enet_out(void) { struct clk *clk = clk_get_sys("enet_out", NULL); @@ -360,16 +247,8 @@ static inline void enable_clk_enet_out(void) static void __init imx28_evk_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_FSL); - mxsfb_pdata.mode_list = mx28evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } @@ -382,20 +261,6 @@ static void __init imx28_evk_post_init(void) } } -static void __init m28evk_init(void) -{ - mxsfb_pdata.mode_list = m28evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); - mxsfb_pdata.default_bpp = 16; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; -} - -static void __init sc_sps1_init(void) -{ - enable_clk_enet_out(); -} - static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; @@ -409,13 +274,6 @@ static void __init apx4devkit_init(void) if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); - - mxsfb_pdata.mode_list = apx4devkit_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; } #define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0) @@ -494,52 +352,24 @@ static void __init tx28_post_init(void) static void __init cfa10049_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; } static void __init cfa10037_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); } -static void __init apf28_init(void) -{ - enable_clk_enet_out(); - - mxsfb_pdata.mode_list = apf28dev_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); - mxsfb_pdata.default_bpp = 16; - mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; -} - static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); - else if (of_machine_is_compatible("fsl,imx23-evk")) - imx23_evk_init(); - else if (of_machine_is_compatible("denx,m28evk")) - m28evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10037")) cfa10037_init(); else if (of_machine_is_compatible("crystalfontz,cfa10049")) cfa10049_init(); - else if (of_machine_is_compatible("armadeus,imx28-apf28")) - apf28_init(); - else if (of_machine_is_compatible("schulercontrol,imx28-sps1")) - sc_sps1_init(); of_platform_populate(NULL, of_default_bus_match_table, mxs_auxdata_lookup, NULL); diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 8f6d30d37c45..b48a79c28845 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -139,6 +140,8 @@ struct mxs_dma_engine { struct dma_device dma_device; struct device_dma_parameters dma_parms; struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS]; + struct platform_device *pdev; + unsigned int nr_channels; }; struct mxs_dma_type { @@ -350,10 +353,8 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan) struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; int ret; - if (!data) - return -EINVAL; - - mxs_chan->chan_irq = data->chan_irq; + if (data) + mxs_chan->chan_irq = data->chan_irq; mxs_chan->ccw = dma_alloc_coherent(mxs_dma->dma_device.dev, CCW_BLOCK_SIZE, &mxs_chan->ccw_phys, @@ -665,8 +666,55 @@ static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma) return ret; } +struct mxs_dma_filter_param { + struct device_node *of_node; + unsigned int chan_id; +}; + +static bool mxs_dma_filter_fn(struct dma_chan *chan, void *fn_param) +{ + struct mxs_dma_filter_param *param = fn_param; + struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); + struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; + int chan_irq; + + if (mxs_dma->dma_device.dev->of_node != param->of_node) + return false; + + if (chan->chan_id != param->chan_id) + return false; + + chan_irq = platform_get_irq(mxs_dma->pdev, param->chan_id); + if (chan_irq < 0) + return false; + + mxs_chan->chan_irq = chan_irq; + + return true; +} + +struct dma_chan *mxs_dma_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct mxs_dma_engine *mxs_dma = ofdma->of_dma_data; + dma_cap_mask_t mask = mxs_dma->dma_device.cap_mask; + struct mxs_dma_filter_param param; + + if (dma_spec->args_count != 1) + return NULL; + + param.of_node = ofdma->of_node; + param.chan_id = dma_spec->args[0]; + + if (param.chan_id >= mxs_dma->nr_channels) + return NULL; + + return dma_request_channel(mask, mxs_dma_filter_fn, ¶m); +} + static int __init mxs_dma_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; const struct platform_device_id *id_entry; const struct of_device_id *of_id; const struct mxs_dma_type *dma_type; @@ -674,10 +722,16 @@ static int __init mxs_dma_probe(struct platform_device *pdev) struct resource *iores; int ret, i; - mxs_dma = kzalloc(sizeof(*mxs_dma), GFP_KERNEL); + mxs_dma = devm_kzalloc(&pdev->dev, sizeof(*mxs_dma), GFP_KERNEL); if (!mxs_dma) return -ENOMEM; + ret = of_property_read_u32(np, "dma-channels", &mxs_dma->nr_channels); + if (ret) { + dev_err(&pdev->dev, "failed to read dma-channels\n"); + return ret; + } + of_id = of_match_device(mxs_dma_dt_ids, &pdev->dev); if (of_id) id_entry = of_id->data; @@ -689,24 +743,13 @@ static int __init mxs_dma_probe(struct platform_device *pdev) mxs_dma->dev_id = dma_type->id; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mxs_dma->base = devm_ioremap_resource(&pdev->dev, iores); + if (IS_ERR(mxs_dma->base)) + return PTR_ERR(mxs_dma->base); - if (!request_mem_region(iores->start, resource_size(iores), - pdev->name)) { - ret = -EBUSY; - goto err_request_region; - } - - mxs_dma->base = ioremap(iores->start, resource_size(iores)); - if (!mxs_dma->base) { - ret = -ENOMEM; - goto err_ioremap; - } - - mxs_dma->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(mxs_dma->clk)) { - ret = PTR_ERR(mxs_dma->clk); - goto err_clk; - } + mxs_dma->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mxs_dma->clk)) + return PTR_ERR(mxs_dma->clk); dma_cap_set(DMA_SLAVE, mxs_dma->dma_device.cap_mask); dma_cap_set(DMA_CYCLIC, mxs_dma->dma_device.cap_mask); @@ -732,8 +775,9 @@ static int __init mxs_dma_probe(struct platform_device *pdev) ret = mxs_dma_init(mxs_dma); if (ret) - goto err_init; + return ret; + mxs_dma->pdev = pdev; mxs_dma->dma_device.dev = &pdev->dev; /* mxs_dma gets 65535 bytes maximum sg size */ @@ -751,22 +795,19 @@ static int __init mxs_dma_probe(struct platform_device *pdev) ret = dma_async_device_register(&mxs_dma->dma_device); if (ret) { dev_err(mxs_dma->dma_device.dev, "unable to register\n"); - goto err_init; + return ret; + } + + ret = of_dma_controller_register(np, mxs_dma_xlate, mxs_dma); + if (ret) { + dev_err(mxs_dma->dma_device.dev, + "failed to register controller\n"); + dma_async_device_unregister(&mxs_dma->dma_device); } dev_info(mxs_dma->dma_device.dev, "initialized\n"); return 0; - -err_init: - clk_put(mxs_dma->clk); -err_clk: - iounmap(mxs_dma->base); -err_ioremap: - release_mem_region(iores->start, resource_size(iores)); -err_request_region: - kfree(mxs_dma); - return ret; } static struct platform_driver mxs_dma_driver = { diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 120f24646696..d1ba6b403b84 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -31,7 +31,6 @@ #include #include #include -#include #define DRIVER_NAME "mxs-i2c" @@ -113,9 +112,7 @@ struct mxs_i2c_dev { uint32_t timing1; /* DMA support components */ - int dma_channel; struct dma_chan *dmach; - struct mxs_dma_data dma_data; uint32_t pio_data[2]; uint32_t addr_data; struct scatterlist sg_io[2]; @@ -518,21 +515,6 @@ static const struct i2c_algorithm mxs_i2c_algo = { .functionality = mxs_i2c_func, }; -static bool mxs_i2c_dma_filter(struct dma_chan *chan, void *param) -{ - struct mxs_i2c_dev *i2c = param; - - if (!mxs_dma_is_apbx(chan)) - return false; - - if (chan->chan_id != i2c->dma_channel) - return false; - - chan->private = &i2c->dma_data; - - return true; -} - static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, int speed) { /* The I2C block clock run at 24MHz */ @@ -577,17 +559,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) struct device_node *node = dev->of_node; int ret; - /* - * TODO: This is a temporary solution and should be changed - * to use generic DMA binding later when the helpers get in. - */ - ret = of_property_read_u32(node, "fsl,i2c-dma-channel", - &i2c->dma_channel); - if (ret) { - dev_err(dev, "Failed to get DMA channel!\n"); - return -ENODEV; - } - ret = of_property_read_u32(node, "clock-frequency", &speed); if (ret) { dev_warn(dev, "No I2C speed selected, using 100kHz\n"); @@ -607,8 +578,7 @@ static int mxs_i2c_probe(struct platform_device *pdev) struct pinctrl *pinctrl; struct resource *res; resource_size_t res_size; - int err, irq, dmairq; - dma_cap_mask_t mask; + int err, irq; pinctrl = devm_pinctrl_get_select_default(dev); if (IS_ERR(pinctrl)) @@ -620,9 +590,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - dmairq = platform_get_irq(pdev, 1); - if (!res || irq < 0 || dmairq < 0) + if (!res || irq < 0) return -ENOENT; res_size = resource_size(res); @@ -648,10 +617,7 @@ static int mxs_i2c_probe(struct platform_device *pdev) } /* Setup the DMA */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - i2c->dma_data.chan_irq = dmairq; - i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); + i2c->dmach = dma_request_slave_channel(dev, "rx-tx"); if (!i2c->dmach) { dev_err(dev, "Failed to request dma\n"); return -ENODEV; diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 4efe3021b217..4fdc71113e6d 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -548,22 +548,6 @@ static const struct mmc_host_ops mxs_mmc_ops = { .enable_sdio_irq = mxs_mmc_enable_sdio_irq, }; -static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param) -{ - struct mxs_mmc_host *host = param; - struct mxs_ssp *ssp = &host->ssp; - - if (!mxs_dma_is_apbh(chan)) - return false; - - if (chan->chan_id != ssp->dma_channel) - return false; - - chan->private = &ssp->dma_data; - - return true; -} - static struct platform_device_id mxs_ssp_ids[] = { { .name = "imx23-mmc", @@ -591,20 +575,17 @@ static int mxs_mmc_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct mxs_mmc_host *host; struct mmc_host *mmc; - struct resource *iores, *dmares; + struct resource *iores; struct pinctrl *pinctrl; - int ret = 0, irq_err, irq_dma; - dma_cap_mask_t mask; + int ret = 0, irq_err; struct regulator *reg_vmmc; enum of_gpio_flags flags; struct mxs_ssp *ssp; u32 bus_width = 0; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); irq_err = platform_get_irq(pdev, 0); - irq_dma = platform_get_irq(pdev, 1); - if (!iores || irq_err < 0 || irq_dma < 0) + if (!iores || irq_err < 0) return -EINVAL; mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev); @@ -620,23 +601,7 @@ static int mxs_mmc_probe(struct platform_device *pdev) goto out_mmc_free; } - if (np) { - ssp->devid = (enum mxs_ssp_id) of_id->data; - /* - * TODO: This is a temporary solution and should be changed - * to use generic DMA binding later when the helpers get in. - */ - ret = of_property_read_u32(np, "fsl,ssp-dma-channel", - &ssp->dma_channel); - if (ret) { - dev_err(mmc_dev(host->mmc), - "failed to get dma channel\n"); - goto out_mmc_free; - } - } else { - ssp->devid = pdev->id_entry->driver_data; - ssp->dma_channel = dmares->start; - } + ssp->devid = (enum mxs_ssp_id) of_id->data; host->mmc = mmc; host->sdio_irq_en = 0; @@ -666,10 +631,7 @@ static int mxs_mmc_probe(struct platform_device *pdev) mxs_mmc_reset(host); - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - ssp->dma_data.chan_irq = irq_dma; - ssp->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host); + ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx"); if (!ssp->dmach) { dev_err(mmc_dev(host->mmc), "%s: failed to request dma\n", __func__); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 717881a3d1b8..25ecfa1822a8 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -36,7 +36,6 @@ #define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand" #define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch" #define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch" -#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma" /* add our owner bbt descriptor */ static uint8_t scan_ff_pattern[] = { 0xff }; @@ -420,28 +419,6 @@ static void release_bch_irq(struct gpmi_nand_data *this) free_irq(i, this); } -static bool gpmi_dma_filter(struct dma_chan *chan, void *param) -{ - struct gpmi_nand_data *this = param; - int dma_channel = (int)this->private; - - if (!mxs_dma_is_apbh(chan)) - return false; - /* - * only catch the GPMI dma channels : - * for mx23 : MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3 - * (These four channels share the same IRQ!) - * - * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7 - * (These eight channels share the same IRQ!) - */ - if (dma_channel == chan->chan_id) { - chan->private = &this->dma_data; - return true; - } - return false; -} - static void release_dma_channels(struct gpmi_nand_data *this) { unsigned int i; @@ -455,36 +432,10 @@ static void release_dma_channels(struct gpmi_nand_data *this) static int acquire_dma_channels(struct gpmi_nand_data *this) { struct platform_device *pdev = this->pdev; - struct resource *r_dma; - struct device_node *dn; - u32 dma_channel; - int ret; struct dma_chan *dma_chan; - dma_cap_mask_t mask; - - /* dma channel, we only use the first one. */ - dn = pdev->dev.of_node; - ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel); - if (ret) { - pr_err("unable to get DMA channel from dt.\n"); - goto acquire_err; - } - this->private = (void *)dma_channel; - - /* gpmi dma interrupt */ - r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ, - GPMI_NAND_DMA_INTERRUPT_RES_NAME); - if (!r_dma) { - pr_err("Can't get resource for DMA\n"); - goto acquire_err; - } - this->dma_data.chan_irq = r_dma->start; /* request dma channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - dma_chan = dma_request_channel(mask, gpmi_dma_filter, this); + dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx"); if (!dma_chan) { pr_err("Failed to request DMA channel.\n"); goto acquire_err; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index 072947731277..a7685e3a8748 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -20,7 +20,7 @@ #include #include #include -#include +#include #define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */ struct resources { @@ -180,7 +180,6 @@ struct gpmi_nand_data { /* DMA channels */ #define DMA_CHANS 8 struct dma_chan *dma_chans[DMA_CHANS]; - struct mxs_dma_data dma_data; enum dma_ops_type last_dma_type; enum dma_ops_type dma_type; struct completion dma_done; diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 911d0253dbb2..dd098ea44d48 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1802,18 +1802,23 @@ fec_probe(struct platform_device *pdev) goto failed_clk; } + /* enet_out is optional, depends on board */ + fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out"); + if (IS_ERR(fep->clk_enet_out)) + fep->clk_enet_out = NULL; + fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp"); fep->bufdesc_ex = pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX; if (IS_ERR(fep->clk_ptp)) { - ret = PTR_ERR(fep->clk_ptp); + fep->clk_ptp = NULL; fep->bufdesc_ex = 0; } clk_prepare_enable(fep->clk_ahb); clk_prepare_enable(fep->clk_ipg); - if (!IS_ERR(fep->clk_ptp)) - clk_prepare_enable(fep->clk_ptp); + clk_prepare_enable(fep->clk_enet_out); + clk_prepare_enable(fep->clk_ptp); reg_phy = devm_regulator_get(&pdev->dev, "phy"); if (!IS_ERR(reg_phy)) { @@ -1878,8 +1883,8 @@ fec_probe(struct platform_device *pdev) failed_regulator: clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_ipg); - if (!IS_ERR(fep->clk_ptp)) - clk_disable_unprepare(fep->clk_ptp); + clk_disable_unprepare(fep->clk_enet_out); + clk_disable_unprepare(fep->clk_ptp); failed_pin: failed_clk: iounmap(fep->hwp); @@ -1905,6 +1910,7 @@ fec_drv_remove(struct platform_device *pdev) clk_disable_unprepare(fep->clk_ptp); if (fep->ptp_clock) ptp_clock_unregister(fep->ptp_clock); + clk_disable_unprepare(fep->clk_enet_out); clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_ipg); for (i = 0; i < FEC_IRQ_NUM; i++) { @@ -1935,6 +1941,7 @@ fec_suspend(struct device *dev) fec_stop(ndev); netif_device_detach(ndev); } + clk_disable_unprepare(fep->clk_enet_out); clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_ipg); @@ -1947,6 +1954,7 @@ fec_resume(struct device *dev) struct net_device *ndev = dev_get_drvdata(dev); struct fec_enet_private *fep = netdev_priv(ndev); + clk_prepare_enable(fep->clk_enet_out); clk_prepare_enable(fep->clk_ahb); clk_prepare_enable(fep->clk_ipg); if (netif_running(ndev)) { diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index eb4372962839..feabcb6a78b4 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -207,6 +207,7 @@ struct fec_enet_private { struct clk *clk_ipg; struct clk *clk_ahb; + struct clk *clk_enet_out; struct clk *clk_ptp; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 22a0af0147fb..7b1c014b0740 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -490,21 +490,6 @@ static int mxs_spi_transfer_one(struct spi_master *master, return status; } -static bool mxs_ssp_dma_filter(struct dma_chan *chan, void *param) -{ - struct mxs_ssp *ssp = param; - - if (!mxs_dma_is_apbh(chan)) - return false; - - if (chan->chan_id != ssp->dma_channel) - return false; - - chan->private = &ssp->dma_data; - - return true; -} - static const struct of_device_id mxs_spi_dt_ids[] = { { .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, }, { .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, }, @@ -520,13 +505,12 @@ static int mxs_spi_probe(struct platform_device *pdev) struct spi_master *master; struct mxs_spi *spi; struct mxs_ssp *ssp; - struct resource *iores, *dmares; + struct resource *iores; struct pinctrl *pinctrl; struct clk *clk; void __iomem *base; - int devid, dma_channel, clk_freq; - int ret = 0, irq_err, irq_dma; - dma_cap_mask_t mask; + int devid, clk_freq; + int ret = 0, irq_err; /* * Default clock speed for the SPI core. 160MHz seems to @@ -537,8 +521,7 @@ static int mxs_spi_probe(struct platform_device *pdev) iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq_err = platform_get_irq(pdev, 0); - irq_dma = platform_get_irq(pdev, 1); - if (!iores || irq_err < 0 || irq_dma < 0) + if (!iores || irq_err < 0) return -EINVAL; base = devm_ioremap_resource(&pdev->dev, iores); @@ -553,32 +536,11 @@ static int mxs_spi_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - if (np) { - devid = (enum mxs_ssp_id) of_id->data; - /* - * TODO: This is a temporary solution and should be changed - * to use generic DMA binding later when the helpers get in. - */ - ret = of_property_read_u32(np, "fsl,ssp-dma-channel", - &dma_channel); - if (ret) { - dev_err(&pdev->dev, - "Failed to get DMA channel\n"); - return -EINVAL; - } - - ret = of_property_read_u32(np, "clock-frequency", - &clk_freq); - if (ret) - clk_freq = clk_freq_default; - } else { - dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!dmares) - return -EINVAL; - devid = pdev->id_entry->driver_data; - dma_channel = dmares->start; + devid = (enum mxs_ssp_id) of_id->data; + ret = of_property_read_u32(np, "clock-frequency", + &clk_freq); + if (ret) clk_freq = clk_freq_default; - } master = spi_alloc_master(&pdev->dev, sizeof(*spi)); if (!master) @@ -597,7 +559,6 @@ static int mxs_spi_probe(struct platform_device *pdev) ssp->clk = clk; ssp->base = base; ssp->devid = devid; - ssp->dma_channel = dma_channel; init_completion(&spi->c); @@ -606,10 +567,7 @@ static int mxs_spi_probe(struct platform_device *pdev) if (ret) goto out_master_free; - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - ssp->dma_data.chan_irq = irq_dma; - ssp->dmach = dma_request_channel(mask, mxs_ssp_dma_filter, ssp); + ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx"); if (!ssp->dmach) { dev_err(ssp->dev, "Failed to request DMA\n"); goto out_master_free; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index d549fe1fa42a..269a27caff33 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -35,7 +35,7 @@ #include #include #include -#include +#include #include @@ -148,11 +148,6 @@ struct mxs_auart_port { struct device *dev; /* for DMA */ - struct mxs_dma_data dma_data; - int dma_channel_rx, dma_channel_tx; - int dma_irq_rx, dma_irq_tx; - int dma_channel; - struct scatterlist tx_sgl; struct dma_chan *tx_dma_chan; void *tx_dma_buf; @@ -440,20 +435,6 @@ static u32 mxs_auart_get_mctrl(struct uart_port *u) return mctrl; } -static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param) -{ - struct mxs_auart_port *s = param; - - if (!mxs_dma_is_apbx(chan)) - return false; - - if (s->dma_channel == chan->chan_id) { - chan->private = &s->dma_data; - return true; - } - return false; -} - static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s); static void dma_rx_callback(void *arg) { @@ -545,21 +526,11 @@ static void mxs_auart_dma_exit(struct mxs_auart_port *s) static int mxs_auart_dma_init(struct mxs_auart_port *s) { - dma_cap_mask_t mask; - if (auart_dma_enabled(s)) return 0; - /* We do not get the right DMA channels. */ - if (s->dma_channel_rx == -1 || s->dma_channel_tx == -1) - return -EINVAL; - /* init for RX */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - s->dma_channel = s->dma_channel_rx; - s->dma_data.chan_irq = s->dma_irq_rx; - s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s); + s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx"); if (!s->rx_dma_chan) goto err_out; s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); @@ -567,9 +538,7 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s) goto err_out; /* init for TX */ - s->dma_channel = s->dma_channel_tx; - s->dma_data.chan_irq = s->dma_irq_tx; - s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s); + s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx"); if (!s->tx_dma_chan) goto err_out; s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); @@ -1020,7 +989,6 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - u32 dma_channel[2]; int ret; if (!np) @@ -1034,20 +1002,8 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, } s->port.line = ret; - s->dma_irq_rx = platform_get_irq(pdev, 1); - s->dma_irq_tx = platform_get_irq(pdev, 2); + s->flags |= MXS_AUART_DMA_CONFIG; - ret = of_property_read_u32_array(np, "fsl,auart-dma-channel", - dma_channel, 2); - if (ret == 0) { - s->dma_channel_rx = dma_channel[0]; - s->dma_channel_tx = dma_channel[1]; - - s->flags |= MXS_AUART_DMA_CONFIG; - } else { - s->dma_channel_rx = -1; - s->dma_channel_tx = -1; - } return 0; } diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4c1546f71d56..e7718fdad1e1 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2437,6 +2437,8 @@ config FB_MXS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_MODE_HELPERS + select OF_VIDEOMODE help Framebuffer support for the MXS SoC. diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 45169cbaba6e..1b2c26d1658c 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -42,13 +42,15 @@ #include #include #include -#include +#include