From 503bded92da283b2f31d87e054c4c6d30c3c2340 Mon Sep 17 00:00:00 2001 From: Pawel Wieczorkiewicz Date: Wed, 20 Feb 2013 17:26:20 +0100 Subject: [PATCH 1/5] tty: atmel_serial_probe(): index of atmel_ports[] fix Index of atmel_ports[ATMEL_MAX_UART] should be smaller than ATMEL_MAX_UART. Signed-off-by: Pawel Wieczorkiewicz Acked-by: Nicolas Ferre Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index d4a7c241b751..3467462869ce 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -158,7 +158,7 @@ struct atmel_uart_port { }; static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; -static unsigned long atmel_ports_in_use; +static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART); #ifdef SUPPORT_SYSRQ static struct console atmel_console; @@ -1769,15 +1769,14 @@ static int atmel_serial_probe(struct platform_device *pdev) if (ret < 0) /* port id not found in platform data nor device-tree aliases: * auto-enumerate it */ - ret = find_first_zero_bit(&atmel_ports_in_use, - sizeof(atmel_ports_in_use)); + ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART); - if (ret > ATMEL_MAX_UART) { + if (ret >= ATMEL_MAX_UART) { ret = -ENODEV; goto err; } - if (test_and_set_bit(ret, &atmel_ports_in_use)) { + if (test_and_set_bit(ret, atmel_ports_in_use)) { /* port already in use */ ret = -EBUSY; goto err; @@ -1857,7 +1856,7 @@ static int atmel_serial_remove(struct platform_device *pdev) /* "port" is allocated statically, so we shouldn't free it */ - clear_bit(port->line, &atmel_ports_in_use); + clear_bit(port->line, atmel_ports_in_use); clk_put(atmel_port->clk); From 8b5c913f7ee6464849570bacb6bcd9ef0eaf7dce Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Tue, 5 Mar 2013 23:16:48 +0800 Subject: [PATCH 2/5] serial: 8250_pci: Add WCH CH352 quirk to avoid Xscale detection The code in 8250.c for detecting ARM/XScale UARTs says: * Try writing and reading the UART_IER_UUE bit (b6). * If it works, this is probably one of the Xscale platform's * internal UARTs. If the above passes, it then goes on to: * It's an Xscale. * We'll leave the UART_IER_UUE bit set to 1 (enabled). However, the CH352 uses the UART_IER_UUE as the LOWPOWER function, so it is readable and writable. According to the datasheet: "LOWPOWER:When the bit is 1, close the internal benchmark clock of serial port to set into low-power status. So it essentially gets mis-detected as Xscale, and gets powered down in the process. The device in question where this was seen is listed by lspci as: Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550]) Re-using the 353 quirk which just sets flags to fixed and type to 16550 is suitable for fixing the 352 as well. Signed-off-by: Wang YanQing Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index aa76825229dc..26e3a97ab157 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d #define PCI_VENDOR_ID_WCH 0x4348 +#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 #define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 #define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 @@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, + /* WCH CH352 2S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH352_2S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, /* * ASIX devices with FIFO bug */ @@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + /* * Commtech, Inc. Fastcom adapters */ From 9196d8acd7f91758872108958dfded7684628444 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 19 Mar 2013 11:34:56 +0100 Subject: [PATCH 3/5] TTY: 8250, revert module name change In 3.7 the 8250 module name was changed unintentionally from 8250 to 8250_core by commit 835d844d1a28efba81d5aca7385e24c29d3a6db2 (8250_pnp: do pnp probe before legacy probe). We then had to re-introduce the old module options to ensure the old good 8250.nr_uart & co. still work. This can be done only by a very dirty hack and we did it in f2b8dfd9e480c3db3bad0c25c590a5d11b31f4ef (serial: 8250: Keep 8250. module options functional after driver rename). That is so damn ugly so that I decided to revert to the old module name and deprecate the new 8250_core options present in 3.7 and 3.8 only. The deprecation will happen in the following patch. Note that this patch changes the hack above to support "8250_core.*", because we now have "8250.*" natively. Signed-off-by: Jiri Slaby Cc: Josh Boyer Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/{8250.c => 8250_core.c} | 4 ++-- drivers/tty/serial/8250/Makefile | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) rename drivers/tty/serial/8250/{8250.c => 8250_core.c} (99%) diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250_core.c similarity index 99% rename from drivers/tty/serial/8250/8250.c rename to drivers/tty/serial/8250/8250_core.c index cf6a5383748a..2d563cb9057e 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -3432,7 +3432,7 @@ MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); static void __used s8250_options(void) { #undef MODULE_PARAM_PREFIX -#define MODULE_PARAM_PREFIX "8250." +#define MODULE_PARAM_PREFIX "8250_core." module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); @@ -3444,5 +3444,5 @@ static void __used s8250_options(void) #endif } #else -MODULE_ALIAS("8250"); +MODULE_ALIAS("8250_core"); #endif diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index a23838a4d535..36d68d054307 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -2,10 +2,10 @@ # Makefile for the 8250 serial device drivers. # -obj-$(CONFIG_SERIAL_8250) += 8250_core.o -8250_core-y := 8250.o -8250_core-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o -8250_core-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o +obj-$(CONFIG_SERIAL_8250) += 8250.o +8250-y := 8250_core.o +8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o From 9326b047e4fd4a8da72e59d913214a1803e9709c Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 19 Mar 2013 11:34:57 +0100 Subject: [PATCH 4/5] TTY: 8250, deprecated 8250_core.* options They were introduced by mistake in 3.7. Let's deprecate them now. For the reasons, see the text in Kconfig below. Signed-off-by: Jiri Slaby Cc: Josh Boyer Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 2 ++ drivers/tty/serial/8250/Kconfig | 17 +++++++++++++++++ 2 files changed, 19 insertions(+) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 2d563cb9057e..35f9c96aada9 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -3418,6 +3418,7 @@ MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); #endif MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); +#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS #ifndef MODULE /* This module was renamed to 8250_core in 3.7. Keep the old "8250" name * working as well for the module options so we don't break people. We @@ -3446,3 +3447,4 @@ static void __used s8250_options(void) #else MODULE_ALIAS("8250_core"); #endif +#endif diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 2ef9537bcb2c..80fe91e64a52 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -33,6 +33,23 @@ config SERIAL_8250 Most people will say Y or M here, so that they can use serial mice, modems and similar devices connecting to the standard serial ports. +config SERIAL_8250_DEPRECATED_OPTIONS + bool "Support 8250_core.* kernel options (DEPRECATED)" + depends on SERIAL_8250 + default y + ---help--- + In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to + accept kernel parameters in both forms like 8250_core.nr_uarts=4 and + 8250.nr_uarts=4. We now renamed the module back to 8250, but if + anybody noticed in 3.7 and changed their userspace we still have to + keep the 8350_core.* options around until they revert the changes + they already did. + + If 8250 is built as a module, this adds 8250_core alias instead. + + If you did not notice yet and/or you have userspace from pre-3.7, it + is safe (and recommended) to say N here. + config SERIAL_8250_PNP bool "8250/16550 PNP device support" if EXPERT depends on SERIAL_8250 && PNP From 855f6fd941019ecc9525ca038b78f50c6c1e80a8 Mon Sep 17 00:00:00 2001 From: John Linn Date: Fri, 22 Mar 2013 18:49:27 +0100 Subject: [PATCH 5/5] Xilinx: ARM: UART: clear pending irqs before enabling irqs The Boot ROM has an issue which will cause the driver to lock up as pending irqs are not being cleared. With them cleared it prevents that issue. This patch is needed for the current (3.9-rc3) mainline kernel. I guess it went unnoticed, because it was only tested with u-boot up until now. And u-boot maybe handles this. [s.trumtrar@pengutronix.de: cherry-picked from linux-xlnx.git] Signed-off-by: Steffen Trumtrar Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index ba451c7209fc..f36bbba1ac8b 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -578,6 +578,8 @@ static int xuartps_startup(struct uart_port *port) /* Receive Timeout register is enabled with value of 10 */ xuartps_writel(10, XUARTPS_RXTOUT_OFFSET); + /* Clear out any pending interrupts before enabling them */ + xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET); /* Set the Interrupt Registers with desired interrupts */ xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |