diff --git a/[refs] b/[refs]
index ac02d28793d3..08996a77b4f0 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 760697beca338599a65484389c7abbe54aedb664
+refs/heads/master: a6b5f2008a3d54b5f5350a01121b718dd6bfead7
diff --git a/trunk/arch/sh/boards/mach-kfr2r09/setup.c b/trunk/arch/sh/boards/mach-kfr2r09/setup.c
index 87438d6603d6..9038d768a525 100644
--- a/trunk/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/trunk/arch/sh/boards/mach-kfr2r09/setup.c
@@ -19,6 +19,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
 #include <linux/usb/r8a66597.h>
+#include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -255,6 +256,9 @@ static struct i2c_board_info kfr2r09_i2c_camera = {
 
 static struct clk *camera_clk;
 
+/* set VIO_CKO clock to 25MHz */
+#define CEU_MCLK_FREQ 25000000
+
 #define DRVCRB 0xA405018C
 static int camera_power(struct device *dev, int mode)
 {
@@ -267,8 +271,7 @@ static int camera_power(struct device *dev, int mode)
 		if (IS_ERR(camera_clk))
 			return PTR_ERR(camera_clk);
 
-		/* set VIO_CKO clock to 25MHz */
-		rate = clk_round_rate(camera_clk, 25000000);
+		rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ);
 		ret = clk_set_rate(camera_clk, rate);
 		if (ret < 0)
 			goto eclkrate;
@@ -318,11 +321,17 @@ static int camera_power(struct device *dev, int mode)
 	return ret;
 }
 
+static struct rj54n1_pdata rj54n1_priv = {
+	.mclk_freq	= CEU_MCLK_FREQ,
+	.ioctl_high	= false,
+};
+
 static struct soc_camera_link rj54n1_link = {
 	.power		= camera_power,
 	.board_info	= &kfr2r09_i2c_camera,
 	.i2c_adapter_id	= 1,
 	.module_name	= "rj54n1cb0c",
+	.priv		= &rj54n1_priv,
 };
 
 static struct platform_device kfr2r09_camera = {
diff --git a/trunk/drivers/media/video/rj54n1cb0c.c b/trunk/drivers/media/video/rj54n1cb0c.c
index 7b08bff443f5..7e42989ce0e4 100644
--- a/trunk/drivers/media/video/rj54n1cb0c.c
+++ b/trunk/drivers/media/video/rj54n1cb0c.c
@@ -13,10 +13,11 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-chip-ident.h>
+#include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
 #include <media/soc_mediabus.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-chip-ident.h>
 
 #define RJ54N1_DEV_CODE			0x0400
 #define RJ54N1_DEV_CODE2		0x0401
@@ -39,6 +40,7 @@
 #define RJ54N1_H_OBEN_OFS		0x0413
 #define RJ54N1_V_OBEN_OFS		0x0414
 #define RJ54N1_RESIZE_CONTROL		0x0415
+#define RJ54N1_STILL_CONTROL		0x0417
 #define RJ54N1_INC_USE_SEL_H		0x0425
 #define RJ54N1_INC_USE_SEL_L		0x0426
 #define RJ54N1_MIRROR_STILL_MODE	0x0427
@@ -50,10 +52,21 @@
 #define RJ54N1_RA_SEL_UL		0x0530
 #define RJ54N1_BYTE_SWAP		0x0531
 #define RJ54N1_OUT_SIGPO		0x053b
+#define RJ54N1_WB_SEL_WEIGHT_I		0x054e
+#define RJ54N1_BIT8_WB			0x0569
+#define RJ54N1_HCAPS_WB			0x056a
+#define RJ54N1_VCAPS_WB			0x056b
+#define RJ54N1_HCAPE_WB			0x056c
+#define RJ54N1_VCAPE_WB			0x056d
+#define RJ54N1_EXPOSURE_CONTROL		0x058c
 #define RJ54N1_FRAME_LENGTH_S_H		0x0595
 #define RJ54N1_FRAME_LENGTH_S_L		0x0596
 #define RJ54N1_FRAME_LENGTH_P_H		0x0597
 #define RJ54N1_FRAME_LENGTH_P_L		0x0598
+#define RJ54N1_PEAK_H			0x05b7
+#define RJ54N1_PEAK_50			0x05b8
+#define RJ54N1_PEAK_60			0x05b9
+#define RJ54N1_PEAK_DIFF		0x05ba
 #define RJ54N1_IOC			0x05ef
 #define RJ54N1_TG_BYPASS		0x0700
 #define RJ54N1_PLL_L			0x0701
@@ -69,6 +82,7 @@
 #define RJ54N1_OCLK_SEL_EN		0x0713
 #define RJ54N1_CLK_RST			0x0717
 #define RJ54N1_RESET_STANDBY		0x0718
+#define RJ54N1_FWFLG			0x07fe
 
 #define E_EXCLK				(1 << 7)
 #define SOFT_STDBY			(1 << 4)
@@ -79,11 +93,18 @@
 #define RESIZE_HOLD_SEL			(1 << 2)
 #define RESIZE_GO			(1 << 1)
 
+/*
+ * When cropping, the camera automatically centers the cropped region, there
+ * doesn't seem to be a way to specify an explicit location of the rectangle.
+ */
 #define RJ54N1_COLUMN_SKIP		0
 #define RJ54N1_ROW_SKIP			0
 #define RJ54N1_MAX_WIDTH		1600
 #define RJ54N1_MAX_HEIGHT		1200
 
+#define PLL_L				2
+#define PLL_N				0x31
+
 /* I2C addresses: 0x50, 0x51, 0x60, 0x61 */
 
 /* RJ54N1CB0C has only one fixed colorspace per pixelcode */
@@ -118,7 +139,7 @@ static const struct rj54n1_datafmt rj54n1_colour_fmts[] = {
 };
 
 struct rj54n1_clock_div {
-	u8 ratio_tg;
+	u8 ratio_tg;	/* can be 0 or an odd number */
 	u8 ratio_t;
 	u8 ratio_r;
 	u8 ratio_op;
@@ -127,12 +148,14 @@ struct rj54n1_clock_div {
 
 struct rj54n1 {
 	struct v4l2_subdev subdev;
+	struct rj54n1_clock_div clk_div;
 	const struct rj54n1_datafmt *fmt;
 	struct v4l2_rect rect;	/* Sensor window */
+	unsigned int tgclk_mhz;
+	bool auto_wb;
 	unsigned short width;	/* Output window */
 	unsigned short height;
 	unsigned short resize;	/* Sensor * 1024 / resize = Output */
-	struct rj54n1_clock_div clk_div;
 	unsigned short scale;
 	u8 bank;
 };
@@ -189,7 +212,7 @@ const static struct rj54n1_reg_val bank_7[] = {
 	{0x714, 0xff},
 	{0x715, 0xff},
 	{0x716, 0x1f},
-	{0x7FE, 0x02},
+	{0x7FE, 2},
 };
 
 const static struct rj54n1_reg_val bank_8[] = {
@@ -377,7 +400,7 @@ const static struct rj54n1_reg_val bank_8[] = {
 	{0x8BB, 0x00},
 	{0x8BC, 0xFF},
 	{0x8BD, 0x00},
-	{0x8FE, 0x02},
+	{0x8FE, 2},
 };
 
 const static struct rj54n1_reg_val bank_10[] = {
@@ -470,8 +493,10 @@ static int rj54n1_enum_fmt(struct v4l2_subdev *sd, int index,
 
 static int rj54n1_s_stream(struct v4l2_subdev *sd, int enable)
 {
-	/* TODO: start / stop streaming */
-	return 0;
+	struct i2c_client *client = sd->priv;
+
+	/* Switch between preview and still shot modes */
+	return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80);
 }
 
 static int rj54n1_set_bus_param(struct soc_camera_device *icd,
@@ -530,6 +555,44 @@ static int rj54n1_commit(struct i2c_client *client)
 	return ret;
 }
 
+static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
+			       u32 *out_w, u32 *out_h);
+
+static int rj54n1_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct i2c_client *client = sd->priv;
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
+	struct v4l2_rect *rect = &a->c;
+	unsigned int dummy, output_w, output_h,
+		input_w = rect->width, input_h = rect->height;
+	int ret;
+
+	/* arbitrary minimum width and height, edges unimportant */
+	soc_camera_limit_side(&dummy, &input_w,
+		     RJ54N1_COLUMN_SKIP, 8, RJ54N1_MAX_WIDTH);
+
+	soc_camera_limit_side(&dummy, &input_h,
+		     RJ54N1_ROW_SKIP, 8, RJ54N1_MAX_HEIGHT);
+
+	output_w = (input_w * 1024 + rj54n1->resize / 2) / rj54n1->resize;
+	output_h = (input_h * 1024 + rj54n1->resize / 2) / rj54n1->resize;
+
+	dev_dbg(&client->dev, "Scaling for %ux%u : %u = %ux%u\n",
+		input_w, input_h, rj54n1->resize, output_w, output_h);
+
+	ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h);
+	if (ret < 0)
+		return ret;
+
+	rj54n1->width		= output_w;
+	rj54n1->height		= output_h;
+	rj54n1->resize		= ret;
+	rj54n1->rect.width	= input_w;
+	rj54n1->rect.height	= input_h;
+
+	return 0;
+}
+
 static int rj54n1_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct i2c_client *client = sd->priv;
@@ -579,11 +642,44 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 			       u32 *out_w, u32 *out_h)
 {
 	struct i2c_client *client = sd->priv;
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	unsigned int skip, resize, input_w = *in_w, input_h = *in_h,
 		output_w = *out_w, output_h = *out_h;
-	u16 inc_sel;
+	u16 inc_sel, wb_bit8, wb_left, wb_right, wb_top, wb_bottom;
+	unsigned int peak, peak_50, peak_60;
 	int ret;
 
+	/*
+	 * We have a problem with crops, where the window is larger than 512x384
+	 * and output window is larger than a half of the input one. In this
+	 * case we have to either reduce the input window to equal or below
+	 * 512x384 or the output window to equal or below 1/2 of the input.
+	 */
+	if (output_w > max(512U, input_w / 2)) {
+		if (2 * output_w > RJ54N1_MAX_WIDTH) {
+			input_w = RJ54N1_MAX_WIDTH;
+			output_w = RJ54N1_MAX_WIDTH / 2;
+		} else {
+			input_w = output_w * 2;
+		}
+
+		dev_dbg(&client->dev, "Adjusted output width: in %u, out %u\n",
+			input_w, output_w);
+	}
+
+	if (output_h > max(384U, input_h / 2)) {
+		if (2 * output_h > RJ54N1_MAX_HEIGHT) {
+			input_h = RJ54N1_MAX_HEIGHT;
+			output_h = RJ54N1_MAX_HEIGHT / 2;
+		} else {
+			input_h = output_h * 2;
+		}
+
+		dev_dbg(&client->dev, "Adjusted output height: in %u, out %u\n",
+			input_h, output_h);
+	}
+
+	/* Idea: use the read mode for snapshots, handle separate geometries */
 	ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_S_L,
 			      RJ54N1_Y_OUTPUT_SIZE_S_L,
 			      RJ54N1_XY_OUTPUT_SIZE_S_H, output_w, output_h);
@@ -595,17 +691,27 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 	if (ret < 0)
 		return ret;
 
-	if (output_w > input_w || output_h > input_h) {
+	if (output_w > input_w && output_h > input_h) {
 		input_w = output_w;
 		input_h = output_h;
 
 		resize = 1024;
 	} else {
 		unsigned int resize_x, resize_y;
-		resize_x = input_w * 1024 / output_w;
-		resize_y = input_h * 1024 / output_h;
-
-		resize = min(resize_x, resize_y);
+		resize_x = (input_w * 1024 + output_w / 2) / output_w;
+		resize_y = (input_h * 1024 + output_h / 2) / output_h;
+
+		/* We want max(resize_x, resize_y), check if it still fits */
+		if (resize_x > resize_y &&
+		    (output_h * resize_x + 512) / 1024 > RJ54N1_MAX_HEIGHT)
+			resize = (RJ54N1_MAX_HEIGHT * 1024 + output_h / 2) /
+				output_h;
+		else if (resize_y > resize_x &&
+			 (output_w * resize_y + 512) / 1024 > RJ54N1_MAX_WIDTH)
+			resize = (RJ54N1_MAX_WIDTH * 1024 + output_w / 2) /
+				output_w;
+		else
+			resize = max(resize_x, resize_y);
 
 		/* Prohibited value ranges */
 		switch (resize) {
@@ -618,12 +724,9 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 		case 8160 ... 8191:
 			resize = 8159;
 			break;
-		case 16320 ... 16383:
+		case 16320 ... 16384:
 			resize = 16319;
 		}
-
-		input_w = output_w * resize / 1024;
-		input_h = output_h * resize / 1024;
 	}
 
 	/* Set scaling */
@@ -636,9 +739,18 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 
 	/*
 	 * Configure a skipping bitmask. The sensor will select a skipping value
-	 * among set bits automatically.
+	 * among set bits automatically. This is very unclear in the datasheet
+	 * too. I was told, in this register one enables all skipping values,
+	 * that are required for a specific resize, and the camera selects
+	 * automatically, which ones to use. But it is unclear how to identify,
+	 * which cropping values are needed. Secondly, why don't we just set all
+	 * bits and let the camera choose? Would it increase processing time and
+	 * reduce the framerate? Using 0xfffc for INC_USE_SEL doesn't seem to
+	 * improve the image quality or stability for larger frames (see comment
+	 * above), but I didn't check the framerate.
 	 */
 	skip = min(resize / 1024, (unsigned)15);
+
 	inc_sel = 1 << skip;
 
 	if (inc_sel <= 2)
@@ -650,6 +762,43 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 	if (!ret)
 		ret = reg_write(client, RJ54N1_INC_USE_SEL_H, inc_sel >> 8);
 
+	if (!rj54n1->auto_wb) {
+		/* Auto white balance window */
+		wb_left	  = output_w / 16;
+		wb_right  = (3 * output_w / 4 - 3) / 4;
+		wb_top	  = output_h / 16;
+		wb_bottom = (3 * output_h / 4 - 3) / 4;
+		wb_bit8	  = ((wb_left >> 2) & 0x40) | ((wb_top >> 4) & 0x10) |
+			((wb_right >> 6) & 4) | ((wb_bottom >> 8) & 1);
+
+		if (!ret)
+			ret = reg_write(client, RJ54N1_BIT8_WB, wb_bit8);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_HCAPS_WB, wb_left);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_VCAPS_WB, wb_top);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_HCAPE_WB, wb_right);
+		if (!ret)
+			ret = reg_write(client, RJ54N1_VCAPE_WB, wb_bottom);
+	}
+
+	/* Antiflicker */
+	peak = 12 * RJ54N1_MAX_WIDTH * (1 << 14) * resize / rj54n1->tgclk_mhz /
+		10000;
+	peak_50 = peak / 6;
+	peak_60 = peak / 5;
+
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_H,
+				((peak_50 >> 4) & 0xf0) | (peak_60 >> 8));
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_50, peak_50);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_60, peak_60);
+	if (!ret)
+		ret = reg_write(client, RJ54N1_PEAK_DIFF, peak / 150);
+
 	/* Start resizing */
 	if (!ret)
 		ret = reg_write(client, RJ54N1_RESIZE_CONTROL,
@@ -658,8 +807,6 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(&client->dev, "resize %u, skip %u\n", resize, skip);
-
 	/* Constant taken from manufacturer's example */
 	msleep(230);
 
@@ -667,11 +814,14 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 	if (ret < 0)
 		return ret;
 
-	*in_w = input_w;
-	*in_h = input_h;
+	*in_w = (output_w * resize + 512) / 1024;
+	*in_h = (output_h * resize + 512) / 1024;
 	*out_w = output_w;
 	*out_h = output_h;
 
+	dev_dbg(&client->dev, "Scaled for %ux%u : %u = %ux%u, skip %u\n",
+		*in_w, *in_h, resize, output_w, output_h, skip);
+
 	return resize;
 }
 
@@ -682,14 +832,14 @@ static int rj54n1_set_clock(struct i2c_client *client)
 
 	/* Enable external clock */
 	ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK | SOFT_STDBY);
-	/* Leave stand-by */
+	/* Leave stand-by. Note: use this when implementing suspend / resume */
 	if (!ret)
 		ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK);
 
 	if (!ret)
-		ret = reg_write(client, RJ54N1_PLL_L, 2);
+		ret = reg_write(client, RJ54N1_PLL_L, PLL_L);
 	if (!ret)
-		ret = reg_write(client, RJ54N1_PLL_N, 0x31);
+		ret = reg_write(client, RJ54N1_PLL_N, PLL_N);
 
 	/* TGCLK dividers */
 	if (!ret)
@@ -748,6 +898,7 @@ static int rj54n1_set_clock(struct i2c_client *client)
 			"Resetting RJ54N1CB0C clock failed: %d!\n", ret);
 		return -EIO;
 	}
+
 	/* Start the PLL */
 	ret = reg_set(client, RJ54N1_OCLK_DSP, 1, 1);
 
@@ -760,6 +911,7 @@ static int rj54n1_set_clock(struct i2c_client *client)
 
 static int rj54n1_reg_init(struct i2c_client *client)
 {
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	int ret = rj54n1_set_clock(client);
 
 	if (!ret)
@@ -782,14 +934,26 @@ static int rj54n1_reg_init(struct i2c_client *client)
 	if (!ret)
 		ret = reg_write(client, RJ54N1_Y_GAIN, 0x84);
 
-	/* Mirror the image back: default is upside down and left-to-right... */
+	/*
+	 * Mirror the image back: default is upside down and left-to-right...
+	 * Set manual preview / still shot switching
+	 */
 	if (!ret)
-		ret = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 3, 3);
+		ret = reg_write(client, RJ54N1_MIRROR_STILL_MODE, 0x27);
 
 	if (!ret)
 		ret = reg_write_multiple(client, bank_4, ARRAY_SIZE(bank_4));
+
+	/* Auto exposure area */
+	if (!ret)
+		ret = reg_write(client, RJ54N1_EXPOSURE_CONTROL, 0x80);
+	/* Check current auto WB config */
 	if (!ret)
+		ret = reg_read(client, RJ54N1_WB_SEL_WEIGHT_I);
+	if (ret >= 0) {
+		rj54n1->auto_wb = ret & 0x80;
 		ret = reg_write_multiple(client, bank_5, ARRAY_SIZE(bank_5));
+	}
 	if (!ret)
 		ret = reg_write_multiple(client, bank_8, ARRAY_SIZE(bank_8));
 
@@ -806,8 +970,9 @@ static int rj54n1_reg_init(struct i2c_client *client)
 		ret = reg_write(client, RJ54N1_RESET_STANDBY,
 				E_EXCLK | DSP_RSTX | TG_RSTX | SEN_RSTX);
 
+	/* Start register update? Same register as 0x?FE in many bank_* sets */
 	if (!ret)
-		ret = reg_write(client, 0x7fe, 2);
+		ret = reg_write(client, RJ54N1_FWFLG, 2);
 
 	/* Constant taken from manufacturer's example */
 	msleep(700);
@@ -815,7 +980,6 @@ static int rj54n1_reg_init(struct i2c_client *client)
 	return ret;
 }
 
-/* FIXME: streaming output only up to 800x600 is functional */
 static int rj54n1_try_fmt(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *mf)
 {
@@ -861,14 +1025,13 @@ static int rj54n1_s_fmt(struct v4l2_subdev *sd,
 	 * The host driver can call us without .try_fmt(), so, we have to take
 	 * care ourseleves
 	 */
-	ret = rj54n1_try_fmt(sd, mf);
+	rj54n1_try_fmt(sd, mf);
 
 	/*
 	 * Verify if the sensor has just been powered on. TODO: replace this
 	 * with proper PM, when a suitable API is available.
 	 */
-	if (!ret)
-		ret = reg_read(client, RJ54N1_RESET_STANDBY);
+	ret = reg_read(client, RJ54N1_RESET_STANDBY);
 	if (ret < 0)
 		return ret;
 
@@ -878,6 +1041,9 @@ static int rj54n1_s_fmt(struct v4l2_subdev *sd,
 			return ret;
 	}
 
+	dev_dbg(&client->dev, "%s: code = %d, width = %u, height = %u\n",
+		__func__, mf->code, mf->width, mf->height);
+
 	/* RA_SEL_UL is only relevant for raw modes, ignored otherwise. */
 	switch (mf->code) {
 	case V4L2_MBUS_FMT_YUYV8_2X8_LE:
@@ -1062,6 +1228,14 @@ static const struct v4l2_queryctrl rj54n1_controls[] = {
 		.step		= 1,
 		.default_value	= 66,
 		.flags		= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.id		= V4L2_CID_AUTO_WHITE_BALANCE,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Auto white balance",
+		.minimum	= 0,
+		.maximum	= 1,
+		.step		= 1,
+		.default_value	= 1,
 	},
 };
 
@@ -1075,6 +1249,7 @@ static struct soc_camera_ops rj54n1_ops = {
 static int rj54n1_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = sd->priv;
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	int data;
 
 	switch (ctrl->id) {
@@ -1097,6 +1272,9 @@ static int rj54n1_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 
 		ctrl->value = data / 2;
 		break;
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		ctrl->value = rj54n1->auto_wb;
+		break;
 	}
 
 	return 0;
@@ -1106,6 +1284,7 @@ static int rj54n1_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	int data;
 	struct i2c_client *client = sd->priv;
+	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	const struct v4l2_queryctrl *qctrl;
 
 	qctrl = soc_camera_find_qctrl(&rj54n1_ops, ctrl->id);
@@ -1136,6 +1315,13 @@ static int rj54n1_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		else if (reg_write(client, RJ54N1_Y_GAIN, ctrl->value * 2) < 0)
 			return -EIO;
 		break;
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		/* Auto WB area - whole image */
+		if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->value << 7,
+			    0x80) < 0)
+			return -EIO;
+		rj54n1->auto_wb = ctrl->value;
+		break;
 	}
 
 	return 0;
@@ -1158,6 +1344,7 @@ static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = {
 	.try_mbus_fmt	= rj54n1_try_fmt,
 	.enum_mbus_fmt	= rj54n1_enum_fmt,
 	.g_crop		= rj54n1_g_crop,
+	.s_crop		= rj54n1_s_crop,
 	.cropcap	= rj54n1_cropcap,
 };
 
@@ -1166,21 +1353,13 @@ static struct v4l2_subdev_ops rj54n1_subdev_ops = {
 	.video	= &rj54n1_subdev_video_ops,
 };
 
-static int rj54n1_pin_config(struct i2c_client *client)
-{
-	/*
-	 * Experimentally found out IOCTRL wired to 0. TODO: add to platform
-	 * data: 0 or 1 << 7.
-	 */
-	return reg_write(client, RJ54N1_IOC, 0);
-}
-
 /*
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
  */
 static int rj54n1_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+			      struct i2c_client *client,
+			      struct rj54n1_pdata *priv)
 {
 	int data1, data2;
 	int ret;
@@ -1201,7 +1380,8 @@ static int rj54n1_video_probe(struct soc_camera_device *icd,
 		goto ei2c;
 	}
 
-	ret = rj54n1_pin_config(client);
+	/* Configure IOCTL polarity from the platform data: 0 or 1 << 7. */
+	ret = reg_write(client, RJ54N1_IOC, priv->ioctl_high << 7);
 	if (ret < 0)
 		goto ei2c;
 
@@ -1219,6 +1399,7 @@ static int rj54n1_probe(struct i2c_client *client,
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	struct soc_camera_link *icl;
+	struct rj54n1_pdata *rj54n1_priv;
 	int ret;
 
 	if (!icd) {
@@ -1227,11 +1408,13 @@ static int rj54n1_probe(struct i2c_client *client,
 	}
 
 	icl = to_soc_camera_link(icd);
-	if (!icl) {
+	if (!icl || !icl->priv) {
 		dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
 		return -EINVAL;
 	}
 
+	rj54n1_priv = icl->priv;
+
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_warn(&adapter->dev,
 			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
@@ -1255,8 +1438,10 @@ static int rj54n1_probe(struct i2c_client *client,
 	rj54n1->height		= RJ54N1_MAX_HEIGHT;
 	rj54n1->fmt		= &rj54n1_colour_fmts[0];
 	rj54n1->resize		= 1024;
+	rj54n1->tgclk_mhz	= (rj54n1_priv->mclk_freq / PLL_L * PLL_N) /
+		(clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1);
 
-	ret = rj54n1_video_probe(icd, client);
+	ret = rj54n1_video_probe(icd, client, rj54n1_priv);
 	if (ret < 0) {
 		icd->ops = NULL;
 		i2c_set_clientdata(client, NULL);
diff --git a/trunk/include/media/rj54n1cb0c.h b/trunk/include/media/rj54n1cb0c.h
new file mode 100644
index 000000000000..8ae3288ae925
--- /dev/null
+++ b/trunk/include/media/rj54n1cb0c.h
@@ -0,0 +1,19 @@
+/*
+ * RJ54N1CB0C Private data
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __RJ54N1CB0C_H__
+#define __RJ54N1CB0C_H__
+
+struct rj54n1_pdata {
+	unsigned int	mclk_freq;
+	bool		ioctl_high;
+};
+
+#endif