diff --git a/[refs] b/[refs] index 778303f08108..a2bda0618850 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 151060ac13144208bd7601d17e4c92c59b98072f +refs/heads/master: c34752bc8b3196aee3115d1aa41972604ab0aea8 diff --git a/trunk/Documentation/ABI/testing/sysfs-block b/trunk/Documentation/ABI/testing/sysfs-block index 44f52a4f5903..cbbd3e069945 100644 --- a/trunk/Documentation/ABI/testing/sysfs-block +++ b/trunk/Documentation/ABI/testing/sysfs-block @@ -60,3 +60,62 @@ Description: Indicates whether the block layer should automatically generate checksums for write requests bound for devices that support receiving integrity metadata. + +What: /sys/block//alignment_offset +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report a physical block size that is + bigger than the logical block size (for instance a drive + with 4KB physical sectors exposing 512-byte logical + blocks to the operating system). This parameter + indicates how many bytes the beginning of the device is + offset from the disk's natural alignment. + +What: /sys/block///alignment_offset +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report a physical block size that is + bigger than the logical block size (for instance a drive + with 4KB physical sectors exposing 512-byte logical + blocks to the operating system). This parameter + indicates how many bytes the beginning of the partition + is offset from the disk's natural alignment. + +What: /sys/block//queue/logical_block_size +Date: May 2009 +Contact: Martin K. Petersen +Description: + This is the smallest unit the storage device can + address. It is typically 512 bytes. + +What: /sys/block//queue/physical_block_size +Date: May 2009 +Contact: Martin K. Petersen +Description: + This is the smallest unit the storage device can write + without resorting to read-modify-write operation. It is + usually the same as the logical block size but may be + bigger. One example is SATA drives with 4KB sectors + that expose a 512-byte logical block size to the + operating system. + +What: /sys/block//queue/minimum_io_size +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report a preferred minimum I/O size, + which is the smallest request the device can perform + without incurring a read-modify-write penalty. For disk + drives this is often the physical block size. For RAID + arrays it is often the stripe chunk size. + +What: /sys/block//queue/optimal_io_size +Date: April 2009 +Contact: Martin K. Petersen +Description: + Storage devices may report an optimal I/O size, which is + the device's preferred unit of receiving I/O. This is + rarely reported for disk drives. For RAID devices it is + usually the stripe width or the internal block size. diff --git a/trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss new file mode 100644 index 000000000000..0a92a7c93a62 --- /dev/null +++ b/trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss @@ -0,0 +1,33 @@ +Where: /sys/bus/pci/devices//ccissX/cXdY/model +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 0 model for logical drive + Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/rev +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 0 revision for logical + drive Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/unique_id +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 83 serial number for logical + drive Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/vendor +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: Displays the SCSI INQUIRY page 0 vendor for logical drive + Y of controller X. + +Where: /sys/bus/pci/devices//ccissX/cXdY/block:cciss!cXdY +Date: March 2009 +Kernel Version: 2.6.30 +Contact: iss_storagedev@hp.com +Description: A symbolic link to /sys/block/cciss!cXdY diff --git a/trunk/Documentation/ABI/testing/sysfs-devices-cache_disable b/trunk/Documentation/ABI/testing/sysfs-devices-cache_disable new file mode 100644 index 000000000000..175bb4f70512 --- /dev/null +++ b/trunk/Documentation/ABI/testing/sysfs-devices-cache_disable @@ -0,0 +1,18 @@ +What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X +Date: August 2008 +KernelVersion: 2.6.27 +Contact: mark.langsdorf@amd.com +Description: These files exist in every cpu's cache index directories. + There are currently 2 cache_disable_# files in each + directory. Reading from these files on a supported + processor will return that cache disable index value + for that processor and node. Writing to one of these + files will cause the specificed cache index to be disabled. + + Currently, only AMD Family 10h Processors support cache index + disable, and only for their L3 caches. See the BIOS and + Kernel Developer's Guide at + http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf + for formatting information and other details on the + cache index disable. +Users: joachim.deguara@amd.com diff --git a/trunk/Documentation/ABI/testing/sysfs-firmware-acpi b/trunk/Documentation/ABI/testing/sysfs-firmware-acpi index e8ffc70ffe12..4f9ba3c2fca7 100644 --- a/trunk/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/trunk/Documentation/ABI/testing/sysfs-firmware-acpi @@ -69,9 +69,13 @@ Description: gpe1F: 0 invalid gpe_all: 1192 sci: 1194 + sci_not: 0 - sci - The total number of times the ACPI SCI - has claimed an interrupt. + sci - The number of times the ACPI SCI + has been called and claimed an interrupt. + + sci_not - The number of times the ACPI SCI + has been called and NOT claimed an interrupt. gpe_all - count of SCI caused by GPEs. diff --git a/trunk/Documentation/ABI/testing/sysfs-kernel-slab b/trunk/Documentation/ABI/testing/sysfs-kernel-slab new file mode 100644 index 000000000000..6dcf75e594fb --- /dev/null +++ b/trunk/Documentation/ABI/testing/sysfs-kernel-slab @@ -0,0 +1,479 @@ +What: /sys/kernel/slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The /sys/kernel/slab directory contains a snapshot of the + internal state of the SLUB allocator for each cache. Certain + files may be modified to change the behavior of the cache (and + any cache it aliases, if any). +Users: kernel memory tuning tools + +What: /sys/kernel/slab/cache/aliases +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The aliases file is read-only and specifies how many caches + have merged into this cache. + +What: /sys/kernel/slab/cache/align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The align file is read-only and specifies the cache's object + alignment in bytes. + +What: /sys/kernel/slab/cache/alloc_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_calls file is read-only and lists the kernel code + locations from which allocations for this cache were performed. + The alloc_calls file only contains information if debugging is + enabled for that cache (see Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/alloc_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_fastpath file is read-only and specifies how many + objects have been allocated using the fast path. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_from_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_from_partial file is read-only and specifies how + many times a cpu slab has been full and it has been refilled + by using a slab from the list of partially used slabs. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_refill +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_refill file is read-only and specifies how many + times the per-cpu freelist was empty but there were objects + available as the result of remote cpu frees. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slab file is read-only and specifies how many times + a new slab had to be allocated from the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slowpath file is read-only and specifies how many + objects have been allocated using the slow path because of a + refill or allocation from a partial or new slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/cache_dma +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cache_dma file is read-only and specifies whether objects + are from ZONE_DMA. + Available when CONFIG_ZONE_DMA is enabled. + +What: /sys/kernel/slab/cache/cpu_slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cpu_slabs file is read-only and displays how many cpu slabs + are active and their NUMA locality. + +What: /sys/kernel/slab/cache/cpuslab_flush +Date: April 2009 +KernelVersion: 2.6.31 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file cpuslab_flush is read-only and specifies how many + times a cache's cpu slabs have been flushed as the result of + destroying or shrinking a cache, a cpu going offline, or as + the result of forcing an allocation from a certain node. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/ctor +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The ctor file is read-only and specifies the cache's object + constructor function, which is invoked for each object when a + new slab is allocated. + +What: /sys/kernel/slab/cache/deactivate_empty +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_empty is read-only and specifies how many + times an empty cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_full +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_full is read-only and specifies how many + times a full cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_remote_frees +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_remote_frees is read-only and specifies how + many times a cpu slab has been deactivated and contained free + objects that were freed remotely. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_head +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_to_head is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + head of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_tail +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_to_tail is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + tail of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/destroy_by_rcu +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The destroy_by_rcu file is read-only and specifies whether + slabs (not objects) are freed by rcu. + +What: /sys/kernel/slab/cache/free_add_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file free_add_partial is read-only and specifies how many + times an object has been freed in a full slab so that it had to + added to its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_calls file is read-only and lists the locations of + object frees if slab debugging is enabled (see + Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/free_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_fastpath file is read-only and specifies how many + objects have been freed using the fast path because it was an + object from the cpu slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_frozen +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_frozen file is read-only and specifies how many + objects have been freed to a frozen slab (i.e. a remote cpu + slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_remove_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file free_remove_partial is read-only and specifies how + many times an object has been freed to a now-empty slab so + that it had to be removed from its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slab file is read-only and specifies how many times an + empty slab has been freed back to the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slowpath file is read-only and specifies how many + objects have been freed using the slow path (i.e. to a full or + partial slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/hwcache_align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The hwcache_align file is read-only and specifies whether + objects are aligned on cachelines. + +What: /sys/kernel/slab/cache/min_partial +Date: February 2009 +KernelVersion: 2.6.30 +Contact: Pekka Enberg , + David Rientjes +Description: + The min_partial file specifies how many empty slabs shall + remain on a node's partial list to avoid the overhead of + allocating new slabs. Such slabs may be reclaimed by utilizing + the shrink file. + +What: /sys/kernel/slab/cache/object_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The object_size file is read-only and specifies the cache's + object size. + +What: /sys/kernel/slab/cache/objects +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects file is read-only and displays how many objects are + active and from which nodes they are from. + +What: /sys/kernel/slab/cache/objects_partial +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects_partial file is read-only and displays how many + objects are on partial slabs and from which nodes they are + from. + +What: /sys/kernel/slab/cache/objs_per_slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file objs_per_slab is read-only and specifies how many + objects may be allocated from a single slab of the order + specified in /sys/kernel/slab/cache/order. + +What: /sys/kernel/slab/cache/order +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The order file specifies the page order at which new slabs are + allocated. It is writable and can be changed to increase the + number of objects per slab. If a slab cannot be allocated + because of fragmentation, SLUB will retry with the minimum order + possible depending on its characteristics. + +What: /sys/kernel/slab/cache/order_fallback +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file order_fallback is read-only and specifies how many + times an allocation of a new slab has not been possible at the + cache's order and instead fallen back to its minimum possible + order. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/partial +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The partial file is read-only and displays how long many + partial slabs there are and how long each node's list is. + +What: /sys/kernel/slab/cache/poison +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The poison file specifies whether objects should be poisoned + when a new slab is allocated. + +What: /sys/kernel/slab/cache/reclaim_account +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The reclaim_account file specifies whether the cache's objects + are reclaimable (and grouped by their mobility). + +What: /sys/kernel/slab/cache/red_zone +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The red_zone file specifies whether the cache's objects are red + zoned. + +What: /sys/kernel/slab/cache/remote_node_defrag_ratio +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file remote_node_defrag_ratio specifies the percentage of + times SLUB will attempt to refill the cpu slab with a partial + slab from a remote node as opposed to allocating a new slab on + the local node. This reduces the amount of wasted memory over + the entire system but can be expensive. + Available when CONFIG_NUMA is enabled. + +What: /sys/kernel/slab/cache/sanity_checks +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The sanity_checks file specifies whether expensive checks + should be performed on free and, at minimum, enables double free + checks. Caches that enable sanity_checks cannot be merged with + caches that do not. + +What: /sys/kernel/slab/cache/shrink +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The shrink file is written when memory should be reclaimed from + a cache. Empty partial slabs are freed and the partial list is + sorted so the slabs with the fewest available objects are used + first. + +What: /sys/kernel/slab/cache/slab_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slab_size file is read-only and specifies the object size + with metadata (debugging information and alignment) in bytes. + +What: /sys/kernel/slab/cache/slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slabs file is read-only and displays how long many slabs + there are (both cpu and partial) and from which nodes they are + from. + +What: /sys/kernel/slab/cache/store_user +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The store_user file specifies whether the location of + allocation or free should be tracked for a cache. + +What: /sys/kernel/slab/cache/total_objects +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The total_objects file is read-only and displays how many total + objects a cache has and from which nodes they are from. + +What: /sys/kernel/slab/cache/trace +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The trace file specifies whether object allocations and frees + should be traced. + +What: /sys/kernel/slab/cache/validate +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + Writing to the validate file causes SLUB to traverse all of its + cache's objects and check the validity of metadata. diff --git a/trunk/Documentation/DMA-API.txt b/trunk/Documentation/DMA-API.txt index d9aa43d78bcc..25fb8bcf32a2 100644 --- a/trunk/Documentation/DMA-API.txt +++ b/trunk/Documentation/DMA-API.txt @@ -704,12 +704,24 @@ this directory the following files can currently be found: The current number of free dma_debug_entries in the allocator. + dma-api/driver-filter + You can write a name of a driver into this file + to limit the debug output to requests from that + particular driver. Write an empty string to + that file to disable the filter and see + all errors again. + If you have this code compiled into your kernel it will be enabled by default. If you want to boot without the bookkeeping anyway you can provide 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging. Notice that you can not enable it again at runtime. You have to reboot to do so. +If you want to see debug messages only for a special device driver you can +specify the dma_debug_driver= parameter. This will enable the +driver filter at boot time. The debug code will only print errors for that +driver afterwards. This filter can be disabled or changed later using debugfs. + When the code disables itself at runtime this is most likely because it ran out of dma_debug_entries. These entries are preallocated at boot. The number of preallocated entries is defined per architecture. If it is too low for you diff --git a/trunk/Documentation/DocBook/Makefile b/trunk/Documentation/DocBook/Makefile index 8918a32c6b3a..9632444f6c62 100644 --- a/trunk/Documentation/DocBook/Makefile +++ b/trunk/Documentation/DocBook/Makefile @@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ mac80211.xml debugobjects.xml sh.xml regulator.xml \ - alsa-driver-api.xml writing-an-alsa-driver.xml + alsa-driver-api.xml writing-an-alsa-driver.xml \ + tracepoint.xml ### # The build process is as follows (targets): @@ -143,7 +144,8 @@ quiet_cmd_db2pdf = PDF $@ $(call cmd,db2pdf) -main_idx = Documentation/DocBook/index.html +index = index.html +main_idx = Documentation/DocBook/$(index) build_main_index = rm -rf $(main_idx) && \ echo '

Linux Kernel HTML Documentation

' >> $(main_idx) && \ echo '

Kernel Version: $(KERNELVERSION)

' >> $(main_idx) && \ @@ -232,7 +234,7 @@ clean-files := $(DOCBOOKS) \ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ $(patsubst %.xml, %.html, $(DOCBOOKS)) \ $(patsubst %.xml, %.9, $(DOCBOOKS)) \ - $(C-procfs-example) + $(C-procfs-example) $(index) clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man diff --git a/trunk/Documentation/DocBook/kernel-api.tmpl b/trunk/Documentation/DocBook/kernel-api.tmpl index d6ac5d61820e..44b3def961a2 100644 --- a/trunk/Documentation/DocBook/kernel-api.tmpl +++ b/trunk/Documentation/DocBook/kernel-api.tmpl @@ -190,16 +190,20 @@ X!Ekernel/module.c !Edrivers/pci/pci.c !Edrivers/pci/pci-driver.c !Edrivers/pci/remove.c -!Edrivers/pci/pci-acpi.c !Edrivers/pci/search.c !Edrivers/pci/msi.c !Edrivers/pci/bus.c +!Edrivers/pci/access.c +!Edrivers/pci/irq.c +!Edrivers/pci/htirq.c !Edrivers/pci/probe.c +!Edrivers/pci/slot.c !Edrivers/pci/rom.c !Edrivers/pci/iov.c +!Idrivers/pci/pci-sysfs.c PCI Hotplug Support Library !Edrivers/pci/hotplug/pci_hotplug_core.c diff --git a/trunk/Documentation/DocBook/kgdb.tmpl b/trunk/Documentation/DocBook/kgdb.tmpl index 372dec20c8da..5cff41a5fa7c 100644 --- a/trunk/Documentation/DocBook/kgdb.tmpl +++ b/trunk/Documentation/DocBook/kgdb.tmpl @@ -281,7 +281,7 @@ seriously wrong while debugging, it will most often be the case that you want to enable gdb to be verbose about its target communications. You do this prior to issuing the target - remote command by typing in: set remote debug 1 + remote command by typing in: set debug remote 1 diff --git a/trunk/Documentation/DocBook/tracepoint.tmpl b/trunk/Documentation/DocBook/tracepoint.tmpl new file mode 100644 index 000000000000..b0756d0fd579 --- /dev/null +++ b/trunk/Documentation/DocBook/tracepoint.tmpl @@ -0,0 +1,89 @@ + + + + + + The Linux Kernel Tracepoint API + + + + Jason + Baron + +
+ jbaron@redhat.com +
+ + + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + Introduction + + Tracepoints are static probe points that are located in strategic points + throughout the kernel. 'Probes' register/unregister with tracepoints + via a callback mechanism. The 'probes' are strictly typed functions that + are passed a unique set of parameters defined by each tracepoint. + + + + From this simple callback mechanism, 'probes' can be used to profile, debug, + and understand kernel behavior. There are a number of tools that provide a + framework for using 'probes'. These tools include Systemtap, ftrace, and + LTTng. + + + + Tracepoints are defined in a number of header files via various macros. Thus, + the purpose of this document is to provide a clear accounting of the available + tracepoints. The intention is to understand not only what tracepoints are + available but also to understand where future tracepoints might be added. + + + + The API presented has functions of the form: + trace_tracepointname(function parameters). These are the + tracepoints callbacks that are found throughout the code. Registering and + unregistering probes with these callback sites is covered in the + Documentation/trace/* directory. + + + + + IRQ +!Iinclude/trace/events/irq.h + + + diff --git a/trunk/Documentation/RCU/trace.txt b/trunk/Documentation/RCU/trace.txt index 068848240a8b..02cced183b2d 100644 --- a/trunk/Documentation/RCU/trace.txt +++ b/trunk/Documentation/RCU/trace.txt @@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy). The output of "cat rcu/rcudata" looks as follows: rcu: - 0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10 - 1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10 - 2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10 - 3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10 - 4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10 - 5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10 - 6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10 - 7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10 +rcu: + 0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10 + 1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10 + 2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10 + 3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10 + 4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10 + 5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10 + 6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10 + 7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10 rcu_bh: - 0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10 - 1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10 - 2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10 - 3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10 - 4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10 - 5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10 - 6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10 - 7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10 + 0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10 + 1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10 + 2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10 + 4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 + 7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10 The first section lists the rcu_data structures for rcu, the second for rcu_bh. Each section has one line per CPU, or eight for this 8-CPU system. @@ -253,12 +254,6 @@ o "pqc" indicates which grace period the last-observed quiescent o "qp" indicates that RCU still expects a quiescent state from this CPU. -o "rpfq" is the number of rcu_pending() calls on this CPU required - to induce this CPU to invoke force_quiescent_state(). - -o "rp" is low-order four hex digits of the count of how many times - rcu_pending() has been invoked on this CPU. - o "dt" is the current value of the dyntick counter that is incremented when entering or leaving dynticks idle state, either by the scheduler or by irq. The number after the "/" is the interrupt @@ -305,6 +300,9 @@ o "b" is the batch limit for this CPU. If more than this number of RCU callbacks is ready to invoke, then the remainder will be deferred. +There is also an rcu/rcudata.csv file with the same information in +comma-separated-variable spreadsheet format. + The output of "cat rcu/rcugp" looks as follows: @@ -411,3 +409,63 @@ o Each element of the form "1/1 0:127 ^0" represents one struct For example, the first entry at the lowest level shows "^0", indicating that it corresponds to bit zero in the first entry at the middle level. + + +The output of "cat rcu/rcu_pending" looks as follows: + +rcu: + 0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741 + 1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792 + 2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629 + 3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723 + 4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110 + 5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456 + 6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834 + 7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888 +rcu_bh: + 0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314 + 1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180 + 2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936 + 3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863 + 4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671 + 5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235 + 6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921 + 7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542 + +As always, this is once again split into "rcu" and "rcu_bh" portions. +The fields are as follows: + +o "np" is the number of times that __rcu_pending() has been invoked + for the corresponding flavor of RCU. + +o "qsp" is the number of times that the RCU was waiting for a + quiescent state from this CPU. + +o "cbr" is the number of times that this CPU had RCU callbacks + that had passed through a grace period, and were thus ready + to be invoked. + +o "cng" is the number of times that this CPU needed another + grace period while RCU was idle. + +o "gpc" is the number of times that an old grace period had + completed, but this CPU was not yet aware of it. + +o "gps" is the number of times that a new grace period had started, + but this CPU was not yet aware of it. + +o "nf" is the number of times that this CPU suspected that the + current grace period had run for too long, and thus needed to + be forced. + + Please note that "forcing" consists of sending resched IPIs + to holdout CPUs. If that CPU really still is in an old RCU + read-side critical section, then we really do have to wait for it. + The assumption behing "forcing" is that the CPU is not still in + an old RCU read-side critical section, but has not yet responded + for some other reason. + +o "nn" is the number of times that this CPU needed nothing. Alert + readers will note that the rcu "nn" number for a given CPU very + closely matches the rcu_bh "np" number for that same CPU. This + is due to short-circuit evaluation in rcu_pending(). diff --git a/trunk/Documentation/Smack.txt b/trunk/Documentation/Smack.txt index 629c92e99783..34614b4c708e 100644 --- a/trunk/Documentation/Smack.txt +++ b/trunk/Documentation/Smack.txt @@ -184,8 +184,9 @@ length. Single character labels using special characters, that being anything other than a letter or digit, are reserved for use by the Smack development team. Smack labels are unstructured, case sensitive, and the only operation ever performed on them is comparison for equality. Smack labels cannot -contain unprintable characters or the "/" (slash) character. Smack labels -cannot begin with a '-', which is reserved for special options. +contain unprintable characters, the "/" (slash), the "\" (backslash), the "'" +(quote) and '"' (double-quote) characters. +Smack labels cannot begin with a '-', which is reserved for special options. There are some predefined labels: @@ -523,3 +524,18 @@ Smack supports some mount options: These mount options apply to all file system types. +Smack auditing + +If you want Smack auditing of security events, you need to set CONFIG_AUDIT +in your kernel configuration. +By default, all denied events will be audited. You can change this behavior by +writing a single character to the /smack/logging file : +0 : no logging +1 : log denied (default) +2 : log accepted +3 : log denied & accepted + +Events are logged as 'key=value' pairs, for each event you at least will get +the subjet, the object, the rights requested, the action, the kernel function +that triggered the event, plus other pairs depending on the type of event +audited. diff --git a/trunk/Documentation/block/biodoc.txt b/trunk/Documentation/block/biodoc.txt index 6fab97ea7e6b..8d2158a1c6aa 100644 --- a/trunk/Documentation/block/biodoc.txt +++ b/trunk/Documentation/block/biodoc.txt @@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +Note: Please refer to Documentation/DMA-mapping.txt for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. diff --git a/trunk/Documentation/filesystems/Locking b/trunk/Documentation/filesystems/Locking index 76efe5b71d7d..3120f8dd2c31 100644 --- a/trunk/Documentation/filesystems/Locking +++ b/trunk/Documentation/filesystems/Locking @@ -512,16 +512,24 @@ locking rules: BKL mmap_sem PageLocked(page) open: no yes close: no yes -fault: no yes -page_mkwrite: no yes no +fault: no yes can return with page locked +page_mkwrite: no yes can return with page locked access: no yes - ->page_mkwrite() is called when a previously read-only page is -about to become writeable. The file system is responsible for -protecting against truncate races. Once appropriate action has been -taking to lock out truncate, the page range should be verified to be -within i_size. The page mapping should also be checked that it is not -NULL. + ->fault() is called when a previously not present pte is about +to be faulted in. The filesystem must find and return the page associated +with the passed in "pgoff" in the vm_fault structure. If it is possible that +the page may be truncated and/or invalidated, then the filesystem must lock +the page, then ensure it is not already truncated (the page lock will block +subsequent truncate), and then return with VM_FAULT_LOCKED, and the page +locked. The VM will unlock the page. + + ->page_mkwrite() is called when a previously read-only pte is +about to become writeable. The filesystem again must ensure that there are +no truncate/invalidate races, and then return with the page locked. If +the page has been truncated, the filesystem should not look up a new page +like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which +will cause the VM to retry the fault. ->access() is called when get_user_pages() fails in acces_process_vm(), typically used to debug a process through diff --git a/trunk/Documentation/filesystems/caching/cachefiles.txt b/trunk/Documentation/filesystems/caching/cachefiles.txt index c78a49b7bba6..748a1ae49e12 100644 --- a/trunk/Documentation/filesystems/caching/cachefiles.txt +++ b/trunk/Documentation/filesystems/caching/cachefiles.txt @@ -407,7 +407,7 @@ A NOTE ON SECURITY ================== CacheFiles makes use of the split security in the task_struct. It allocates -its own task_security structure, and redirects current->act_as to point to it +its own task_security structure, and redirects current->cred to point to it when it acts on behalf of another process, in that process's context. The reason it does this is that it calls vfs_mkdir() and suchlike rather than @@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what the process looks like in /proc. So CacheFiles makes use of a logical split in the security between the -objective security (task->sec) and the subjective security (task->act_as). The -objective security holds the intrinsic security properties of a process and is -never overridden. This is what appears in /proc, and is what is used when a +objective security (task->real_cred) and the subjective security (task->cred). +The objective security holds the intrinsic security properties of a process and +is never overridden. This is what appears in /proc, and is what is used when a process is the target of an operation by some other process (SIGKILL for example). diff --git a/trunk/Documentation/filesystems/gfs2-glocks.txt b/trunk/Documentation/filesystems/gfs2-glocks.txt index 4dae9a3840bf..0494f78d87e4 100644 --- a/trunk/Documentation/filesystems/gfs2-glocks.txt +++ b/trunk/Documentation/filesystems/gfs2-glocks.txt @@ -60,7 +60,7 @@ go_lock | Called for the first local holder of a lock go_unlock | Called on the final local unlock of a lock go_dump | Called to print content of object for debugfs file, or on | error to dump glock to the log. -go_type; | The type of the glock, LM_TYPE_..... +go_type | The type of the glock, LM_TYPE_..... go_min_hold_time | The minimum hold time The minimum hold time for each lock is the time after a remote lock diff --git a/trunk/Documentation/filesystems/gfs2.txt b/trunk/Documentation/filesystems/gfs2.txt index 593004b6bbab..5e3ab8f3beff 100644 --- a/trunk/Documentation/filesystems/gfs2.txt +++ b/trunk/Documentation/filesystems/gfs2.txt @@ -11,18 +11,15 @@ their I/O so file system consistency is maintained. One of the nifty features of GFS is perfect consistency -- changes made to the file system on one machine show up immediately on all other machines in the cluster. -GFS uses interchangable inter-node locking mechanisms. Different lock -modules can plug into GFS and each file system selects the appropriate -lock module at mount time. Lock modules include: +GFS uses interchangable inter-node locking mechanisms, the currently +supported mechanisms are: lock_nolock -- allows gfs to be used as a local file system lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking The dlm is found at linux/fs/dlm/ -In addition to interfacing with an external locking manager, a gfs lock -module is responsible for interacting with external cluster management -systems. Lock_dlm depends on user space cluster management systems found +Lock_dlm depends on user space cluster management systems found at the URL above. To use gfs as a local file system, no external clustering systems are @@ -31,13 +28,19 @@ needed, simply: $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device $ mount -t gfs2 /dev/block_device /dir -GFS2 is not on-disk compatible with previous versions of GFS. +If you are using Fedora, you need to install the gfs2-utils package +and, for lock_dlm, you will also need to install the cman package +and write a cluster.conf as per the documentation. + +GFS2 is not on-disk compatible with previous versions of GFS, but it +is pretty close. The following man pages can be found at the URL above: - gfs2_fsck to repair a filesystem + fsck.gfs2 to repair a filesystem gfs2_grow to expand a filesystem online gfs2_jadd to add journals to a filesystem online gfs2_tool to manipulate, examine and tune a filesystem gfs2_quota to examine and change quota values in a filesystem + gfs2_convert to convert a gfs filesystem to gfs2 in-place mount.gfs2 to help mount(8) mount a filesystem mkfs.gfs2 to make a filesystem diff --git a/trunk/Documentation/filesystems/tmpfs.txt b/trunk/Documentation/filesystems/tmpfs.txt index 222437efd75a..3015da0c6b2a 100644 --- a/trunk/Documentation/filesystems/tmpfs.txt +++ b/trunk/Documentation/filesystems/tmpfs.txt @@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root. Author: Christoph Rohland , 1.12.01 Updated: - Hugh Dickins , 4 June 2007 + Hugh Dickins, 4 June 2007 diff --git a/trunk/Documentation/futex-requeue-pi.txt b/trunk/Documentation/futex-requeue-pi.txt new file mode 100644 index 000000000000..9dc1ff4fd536 --- /dev/null +++ b/trunk/Documentation/futex-requeue-pi.txt @@ -0,0 +1,131 @@ +Futex Requeue PI +---------------- + +Requeueing of tasks from a non-PI futex to a PI futex requires +special handling in order to ensure the underlying rt_mutex is never +left without an owner if it has waiters; doing so would break the PI +boosting logic [see rt-mutex-desgin.txt] For the purposes of +brevity, this action will be referred to as "requeue_pi" throughout +this document. Priority inheritance is abbreviated throughout as +"PI". + +Motivation +---------- + +Without requeue_pi, the glibc implementation of +pthread_cond_broadcast() must resort to waking all the tasks waiting +on a pthread_condvar and letting them try to sort out which task +gets to run first in classic thundering-herd formation. An ideal +implementation would wake the highest-priority waiter, and leave the +rest to the natural wakeup inherent in unlocking the mutex +associated with the condvar. + +Consider the simplified glibc calls: + +/* caller must lock mutex */ +pthread_cond_wait(cond, mutex) +{ + lock(cond->__data.__lock); + unlock(mutex); + do { + unlock(cond->__data.__lock); + futex_wait(cond->__data.__futex); + lock(cond->__data.__lock); + } while(...) + unlock(cond->__data.__lock); + lock(mutex); +} + +pthread_cond_broadcast(cond) +{ + lock(cond->__data.__lock); + unlock(cond->__data.__lock); + futex_requeue(cond->data.__futex, cond->mutex); +} + +Once pthread_cond_broadcast() requeues the tasks, the cond->mutex +has waiters. Note that pthread_cond_wait() attempts to lock the +mutex only after it has returned to user space. This will leave the +underlying rt_mutex with waiters, and no owner, breaking the +previously mentioned PI-boosting algorithms. + +In order to support PI-aware pthread_condvar's, the kernel needs to +be able to requeue tasks to PI futexes. This support implies that +upon a successful futex_wait system call, the caller would return to +user space already holding the PI futex. The glibc implementation +would be modified as follows: + + +/* caller must lock mutex */ +pthread_cond_wait_pi(cond, mutex) +{ + lock(cond->__data.__lock); + unlock(mutex); + do { + unlock(cond->__data.__lock); + futex_wait_requeue_pi(cond->__data.__futex); + lock(cond->__data.__lock); + } while(...) + unlock(cond->__data.__lock); + /* the kernel acquired the the mutex for us */ +} + +pthread_cond_broadcast_pi(cond) +{ + lock(cond->__data.__lock); + unlock(cond->__data.__lock); + futex_requeue_pi(cond->data.__futex, cond->mutex); +} + +The actual glibc implementation will likely test for PI and make the +necessary changes inside the existing calls rather than creating new +calls for the PI cases. Similar changes are needed for +pthread_cond_timedwait() and pthread_cond_signal(). + +Implementation +-------------- + +In order to ensure the rt_mutex has an owner if it has waiters, it +is necessary for both the requeue code, as well as the waiting code, +to be able to acquire the rt_mutex before returning to user space. +The requeue code cannot simply wake the waiter and leave it to +acquire the rt_mutex as it would open a race window between the +requeue call returning to user space and the waiter waking and +starting to run. This is especially true in the uncontended case. + +The solution involves two new rt_mutex helper routines, +rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which +allow the requeue code to acquire an uncontended rt_mutex on behalf +of the waiter and to enqueue the waiter on a contended rt_mutex. +Two new system calls provide the kernel<->user interface to +requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI. + +FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait() +and pthread_cond_timedwait()) to block on the initial futex and wait +to be requeued to a PI-aware futex. The implementation is the +result of a high-speed collision between futex_wait() and +futex_lock_pi(), with some extra logic to check for the additional +wake-up scenarios. + +FUTEX_REQUEUE_CMP_PI is called by the waker +(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and +possibly wake the waiting tasks. Internally, this system call is +still handled by futex_requeue (by passing requeue_pi=1). Before +requeueing, futex_requeue() attempts to acquire the requeue target +PI futex on behalf of the top waiter. If it can, this waiter is +woken. futex_requeue() then proceeds to requeue the remaining +nr_wake+nr_requeue tasks to the PI futex, calling +rt_mutex_start_proxy_lock() prior to each requeue to prepare the +task as a waiter on the underlying rt_mutex. It is possible that +the lock can be acquired at this stage as well, if so, the next +waiter is woken to finish the acquisition of the lock. + +FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but +their sum is all that really matters. futex_requeue() will wake or +requeue up to nr_wake + nr_requeue tasks. It will wake only as many +tasks as it can acquire the lock for, which in the majority of cases +should be 0 as good programming practice dictates that the caller of +either pthread_cond_broadcast() or pthread_cond_signal() acquire the +mutex prior to making the call. FUTEX_REQUEUE_PI requires that +nr_wake=1. nr_requeue should be INT_MAX for broadcast and 0 for +signal. diff --git a/trunk/Documentation/hwmon/sysfs-interface b/trunk/Documentation/hwmon/sysfs-interface index 2f10ce6a879f..004ee161721e 100644 --- a/trunk/Documentation/hwmon/sysfs-interface +++ b/trunk/Documentation/hwmon/sysfs-interface @@ -150,6 +150,11 @@ fan[1-*]_min Fan minimum value Unit: revolution/min (RPM) RW +fan[1-*]_max Fan maximum value + Unit: revolution/min (RPM) + Only rarely supported by the hardware. + RW + fan[1-*]_input Fan input value. Unit: revolution/min (RPM) RO @@ -390,6 +395,7 @@ OR in[0-*]_min_alarm in[0-*]_max_alarm fan[1-*]_min_alarm +fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm temp[1-*]_crit_alarm diff --git a/trunk/Documentation/ide/ide.txt b/trunk/Documentation/ide/ide.txt index 0c78f4b1d9d9..e77bebfa7b0d 100644 --- a/trunk/Documentation/ide/ide.txt +++ b/trunk/Documentation/ide/ide.txt @@ -216,6 +216,8 @@ Other kernel parameters for ide_core are: * "noflush=[interface_number.device_number]" to disable flush requests +* "nohpa=[interface_number.device_number]" to disable Host Protected Area + * "noprobe=[interface_number.device_number]" to skip probing * "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit diff --git a/trunk/Documentation/input/bcm5974.txt b/trunk/Documentation/input/bcm5974.txt new file mode 100644 index 000000000000..5e22dcf6d48d --- /dev/null +++ b/trunk/Documentation/input/bcm5974.txt @@ -0,0 +1,65 @@ +BCM5974 Driver (bcm5974) +------------------------ + Copyright (C) 2008-2009 Henrik Rydberg + +The USB initialization and package decoding was made by Scott Shawcroft as +part of the touchd user-space driver project: + Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) + +The BCM5974 driver is based on the appletouch driver: + Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + Copyright (C) 2005 Stelian Pop (stelian@popies.net) + Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) + Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + +This driver adds support for the multi-touch trackpad on the new Apple +Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on +those computers, and integrates well with the synaptics driver of the Xorg +system. + +Known to work on Macbook Air, Macbook Pro Penryn and the new unibody +Macbook 5 and Macbook Pro 5. + +Usage +----- + +The driver loads automatically for the supported usb device ids, and +becomes available both as an event device (/dev/input/event*) and as a +mouse via the mousedev driver (/dev/input/mice). + +USB Race +-------- + +The Apple multi-touch trackpads report both mouse and keyboard events via +different interfaces of the same usb device. This creates a race condition +with the HID driver, which, if not told otherwise, will find the standard +HID mouse and keyboard, and claim the whole device. To remedy, the usb +product id must be listed in the mouse_ignore list of the hid driver. + +Debug output +------------ + +To ease the development for new hardware version, verbose packet output can +be switched on with the debug kernel module parameter. The range [1-9] +yields different levels of verbosity. Example (as root): + +echo -n 9 > /sys/module/bcm5974/parameters/debug + +tail -f /var/log/debug + +echo -n 0 > /sys/module/bcm5974/parameters/debug + +Trivia +------ + +The driver was developed at the ubuntu forums in June 2008 [1], and now has +a more permanent home at bitmath.org [2]. + +Links +----- + +[1] http://ubuntuforums.org/showthread.php?t=840040 +[2] http://http://bitmath.org/code/ diff --git a/trunk/Documentation/input/multi-touch-protocol.txt b/trunk/Documentation/input/multi-touch-protocol.txt new file mode 100644 index 000000000000..a12ea3b586e6 --- /dev/null +++ b/trunk/Documentation/input/multi-touch-protocol.txt @@ -0,0 +1,195 @@ +Multi-touch (MT) Protocol +------------------------- + Copyright (C) 2009 Henrik Rydberg + + +Introduction +------------ + +In order to utilize the full power of the new multi-touch devices, a way to +report detailed finger data to user space is needed. This document +describes the multi-touch (MT) protocol which allows kernel drivers to +report details for an arbitrary number of fingers. + + +Usage +----- + +Anonymous finger details are sent sequentially as separate packets of ABS +events. Only the ABS_MT events are recognized as part of a finger +packet. The end of a packet is marked by calling the input_mt_sync() +function, which generates a SYN_MT_REPORT event. This instructs the +receiver to accept the data for the current finger and prepare to receive +another. The end of a multi-touch transfer is marked by calling the usual +input_sync() function. This instructs the receiver to act upon events +accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new +set of events/packets. + +A set of ABS_MT events with the desired properties is defined. The events +are divided into categories, to allow for partial implementation. The +minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and +ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the +device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size +of the approaching finger. Anisotropy and direction may be specified with +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The +ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a +finger or a pen or something else. Devices with more granular information +may specify general shapes as blobs, i.e., as a sequence of rectangular +shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices +that currently support it, the ABS_MT_TRACKING_ID event may be used to +report finger tracking from hardware [5]. + +Here is what a minimal event sequence for a two-finger touch would look +like: + + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + SYN_REPORT + + +Event Semantics +--------------- + +The word "contact" is used to describe a tool which is in direct contact +with the surface. A finger, a pen or a rubber all classify as contacts. + +ABS_MT_TOUCH_MAJOR + +The length of the major axis of the contact. The length should be given in +surface units. If the surface has an X times Y resolution, the largest +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4]. + +ABS_MT_TOUCH_MINOR + +The length, in surface units, of the minor axis of the contact. If the +contact is circular, this event can be omitted [4]. + +ABS_MT_WIDTH_MAJOR + +The length, in surface units, of the major axis of the approaching +tool. This should be understood as the size of the tool itself. The +orientation of the contact and the approaching tool are assumed to be the +same [4]. + +ABS_MT_WIDTH_MINOR + +The length, in surface units, of the minor axis of the approaching +tool. Omit if circular [4]. + +The above four values can be used to derive additional information about +the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates +the notion of pressure. The fingers of the hand and the palm all have +different characteristic widths [1]. + +ABS_MT_ORIENTATION + +The orientation of the ellipse. The value should describe a signed quarter +of a revolution clockwise around the touch center. The signed value range +is arbitrary, but zero should be returned for a finger aligned along the Y +axis of the surface, a negative value when finger is turned to the left, and +a positive value when finger turned to the right. When completely aligned with +the X axis, the range max should be returned. Orientation can be omitted +if the touching object is circular, or if the information is not available +in the kernel driver. Partial orientation support is possible if the device +can distinguish between the two axis, but not (uniquely) any values in +between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1] +[4]. + +ABS_MT_POSITION_X + +The surface X coordinate of the center of the touching ellipse. + +ABS_MT_POSITION_Y + +The surface Y coordinate of the center of the touching ellipse. + +ABS_MT_TOOL_TYPE + +The type of approaching tool. A lot of kernel drivers cannot distinguish +between different tool types, such as a finger or a pen. In such cases, the +event should be omitted. The protocol currently supports MT_TOOL_FINGER and +MT_TOOL_PEN [2]. + +ABS_MT_BLOB_ID + +The BLOB_ID groups several packets together into one arbitrarily shaped +contact. This is a low-level anonymous grouping, and should not be confused +with the high-level trackingID [5]. Most kernel drivers will not have blob +capability, and can safely omit the event. + +ABS_MT_TRACKING_ID + +The TRACKING_ID identifies an initiated contact throughout its life cycle +[5]. There are currently only a few devices that support it, so this event +should normally be omitted. + + +Event Computation +----------------- + +The flora of different hardware unavoidably leads to some devices fitting +better to the MT protocol than others. To simplify and unify the mapping, +this section gives recipes for how to compute certain events. + +For devices reporting contacts as rectangular shapes, signed orientation +cannot be obtained. Assuming X and Y are the lengths of the sides of the +touching rectangle, here is a simple formula that retains the most +information possible: + + ABS_MT_TOUCH_MAJOR := max(X, Y) + ABS_MT_TOUCH_MINOR := min(X, Y) + ABS_MT_ORIENTATION := bool(X > Y) + +The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that +the device can distinguish between a finger along the Y axis (0) and a +finger along the X axis (1). + + +Finger Tracking +--------------- + +The kernel driver should generate an arbitrary enumeration of the set of +anonymous contacts currently on the surface. The order in which the packets +appear in the event stream is not important. + +The process of finger tracking, i.e., to assign a unique trackingID to each +initiated contact on the surface, is left to user space; preferably the +multi-touch X driver [3]. In that driver, the trackingID stays the same and +unique until the contact vanishes (when the finger leaves the surface). The +problem of assigning a set of anonymous fingers to a set of identified +fingers is a euclidian bipartite matching problem at each event update, and +relies on a sufficiently rapid update rate. + +There are a few devices that support trackingID in hardware. User space can +make use of these native identifiers to reduce bandwidth and cpu usage. + + +Notes +----- + +In order to stay compatible with existing applications, the data +reported in a finger packet must not be recognized as single-touch +events. In addition, all finger data must bypass input filtering, +since subsequent events of the same type refer to different fingers. + +The first kernel driver to utilize the MT protocol is the bcm5974 driver, +where examples can be found. + +[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the +difference between the contact position and the approaching tool position +could be used to derive tilt. +[2] The list can of course be extended. +[3] The multi-touch X driver is currently in the prototyping stage. At the +time of writing (April 2009), the MT protocol is not yet merged, and the +prototype implements finger matching, basic mouse support and two-finger +scrolling. The project aims at improving the quality of current multi-touch +functionality available in the Synaptics X driver, and in addition +implement more advanced gestures. +[4] See the section on event computation. +[5] See the section on finger tracking. diff --git a/trunk/Documentation/isdn/00-INDEX b/trunk/Documentation/isdn/00-INDEX index 9fee5f2e5c62..5a2d69989a8c 100644 --- a/trunk/Documentation/isdn/00-INDEX +++ b/trunk/Documentation/isdn/00-INDEX @@ -2,8 +2,14 @@ - this file (info on ISDN implementation for Linux) CREDITS - list of the kind folks that brought you this stuff. +HiSax.cert + - information about the ITU approval certification of the HiSax driver. INTERFACE - - description of Linklevel and Hardwarelevel ISDN interface. + - description of isdn4linux Link Level and Hardware Level interfaces. +INTERFACE.fax + - description of the fax subinterface of isdn4linux. +INTERFACE.CAPI + - description of kernel CAPI Link Level to Hardware Level interface. README - general info on what you need and what to do for Linux ISDN. README.FAQ @@ -12,6 +18,8 @@ README.audio - info for running audio over ISDN. README.fax - info for using Fax over ISDN. +README.gigaset + - info on the drivers for Siemens Gigaset ISDN adapters. README.icn - info on the ICN-ISDN-card and its driver. README.HiSax @@ -37,7 +45,8 @@ README.diversion README.sc - info on driver for Spellcaster cards. README.x25 - _ info for running X.25 over ISDN. + - info for running X.25 over ISDN. README.hysdn - - info on driver for Hypercope active HYSDN cards - + - info on driver for Hypercope active HYSDN cards +README.mISDN + - info on the Modular ISDN subsystem (mISDN). diff --git a/trunk/Documentation/isdn/INTERFACE.CAPI b/trunk/Documentation/isdn/INTERFACE.CAPI new file mode 100644 index 000000000000..786d619b36e5 --- /dev/null +++ b/trunk/Documentation/isdn/INTERFACE.CAPI @@ -0,0 +1,213 @@ +Kernel CAPI Interface to Hardware Drivers +----------------------------------------- + +1. Overview + +From the CAPI 2.0 specification: +COMMON-ISDN-API (CAPI) is an application programming interface standard used +to access ISDN equipment connected to basic rate interfaces (BRI) and primary +rate interfaces (PRI). + +Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI +hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI +lingo) with Kernel CAPI to indicate their readiness to provide their service +to CAPI applications. CAPI applications also register with Kernel CAPI, +requesting association with a CAPI device. Kernel CAPI then dispatches the +application registration to an available device, forwarding it to the +corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both +directions between the application and the hardware driver. + +Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. +This standard is freely available from http://www.capi.org. + + +2. Driver and Device Registration + +CAPI drivers optionally register themselves with Kernel CAPI by calling the +Kernel CAPI function register_capi_driver() with a pointer to a struct +capi_driver. This structure must be filled with the name and revision of the +driver, and optionally a pointer to a callback function, add_card(). The +registration can be revoked by calling the function unregister_capi_driver() +with a pointer to the same struct capi_driver. + +CAPI drivers must register each of the ISDN devices they control with Kernel +CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a +struct capi_ctr before they can be used. This structure must be filled with +the names of the driver and controller, and a number of callback function +pointers which are subsequently used by Kernel CAPI for communicating with the +driver. The registration can be revoked by calling the function +detach_capi_ctr() with a pointer to the same struct capi_ctr. + +Before the device can be actually used, the driver must fill in the device +information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr +structure of the device, and signal its readiness by calling capi_ctr_ready(). +From then on, Kernel CAPI may call the registered callback functions for the +device. + +If the device becomes unusable for any reason (shutdown, disconnect ...), the +driver has to call capi_ctr_reseted(). This will prevent further calls to the +callback functions by Kernel CAPI. + + +3. Application Registration and Communication + +Kernel CAPI forwards registration requests from applications (calls to CAPI +operation CAPI_REGISTER) to an appropriate hardware driver by calling its +register_appl() callback function. A unique Application ID (ApplID, u16) is +allocated by Kernel CAPI and passed to register_appl() along with the +parameter structure provided by the application. This is analogous to the +open() operation on regular files or character devices. + +After a successful return from register_appl(), CAPI messages from the +application may be passed to the driver for the device via calls to the +send_message() callback function. The CAPI message to send is stored in the +data portion of an skb. Conversely, the driver may call Kernel CAPI's +capi_ctr_handle_message() function to pass a received CAPI message to Kernel +CAPI for forwarding to an application, specifying its ApplID. + +Deregistration requests (CAPI operation CAPI_RELEASE) from applications are +forwarded as calls to the release_appl() callback function, passing the same +ApplID as with register_appl(). After return from release_appl(), no CAPI +messages for that application may be passed to or from the device anymore. + + +4. Data Structures + +4.1 struct capi_driver + +This structure describes a Kernel CAPI driver itself. It is used in the +register_capi_driver() and unregister_capi_driver() functions, and contains +the following non-private fields, all to be set by the driver before calling +register_capi_driver(): + +char name[32] + the name of the driver, as a zero-terminated ASCII string +char revision[32] + the revision number of the driver, as a zero-terminated ASCII string +int (*add_card)(struct capi_driver *driver, capicardparams *data) + a callback function pointer (may be NULL) + + +4.2 struct capi_ctr + +This structure describes an ISDN device (controller) handled by a Kernel CAPI +driver. After registration via the attach_capi_ctr() function it is passed to +all controller specific lower layer interface and callback functions to +identify the controller to operate on. + +It contains the following non-private fields: + +- to be set by the driver before calling attach_capi_ctr(): + +struct module *owner + pointer to the driver module owning the device + +void *driverdata + an opaque pointer to driver specific data, not touched by Kernel CAPI + +char name[32] + the name of the controller, as a zero-terminated ASCII string + +char *driver_name + the name of the driver, as a zero-terminated ASCII string + +int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata) + (optional) pointer to a callback function for sending firmware and + configuration data to the device + +void (*reset_ctr)(struct capi_ctr *ctrlr) + pointer to a callback function for performing a reset on the device, + releasing all registered applications + +void (*register_appl)(struct capi_ctr *ctrlr, u16 applid, + capi_register_params *rparam) +void (*release_appl)(struct capi_ctr *ctrlr, u16 applid) + pointers to callback functions for registration and deregistration of + applications with the device + +u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb) + pointer to a callback function for sending a CAPI message to the + device + +char *(*procinfo)(struct capi_ctr *ctrlr) + pointer to a callback function returning the entry for the device in + the CAPI controller info table, /proc/capi/controller + +read_proc_t *ctr_read_proc + pointer to the read_proc callback function for the device's proc file + system entry, /proc/capi/controllers/; will be called with a + pointer to the device's capi_ctr structure as the last (data) argument + +- to be filled in before calling capi_ctr_ready(): + +u8 manu[CAPI_MANUFACTURER_LEN] + value to return for CAPI_GET_MANUFACTURER + +capi_version version + value to return for CAPI_GET_VERSION + +capi_profile profile + value to return for CAPI_GET_PROFILE + +u8 serial[CAPI_SERIAL_LEN] + value to return for CAPI_GET_SERIAL + + +5. Lower Layer Interface Functions + +(declared in ) + +void register_capi_driver(struct capi_driver *drvr) +void unregister_capi_driver(struct capi_driver *drvr) + register/unregister a driver with Kernel CAPI + +int attach_capi_ctr(struct capi_ctr *ctrlr) +int detach_capi_ctr(struct capi_ctr *ctrlr) + register/unregister a device (controller) with Kernel CAPI + +void capi_ctr_ready(struct capi_ctr *ctrlr) +void capi_ctr_reseted(struct capi_ctr *ctrlr) + signal controller ready/not ready + +void capi_ctr_suspend_output(struct capi_ctr *ctrlr) +void capi_ctr_resume_output(struct capi_ctr *ctrlr) + signal suspend/resume + +void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid, + struct sk_buff *skb) + pass a received CAPI message to Kernel CAPI + for forwarding to the specified application + + +6. Helper Functions and Macros + +Library functions (from ): + +void capilib_new_ncci(struct list_head *head, u16 applid, + u32 ncci, u32 winsize) +void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci) +void capilib_release_appl(struct list_head *head, u16 applid) +void capilib_release(struct list_head *head) +void capilib_data_b3_conf(struct list_head *head, u16 applid, + u32 ncci, u16 msgid) +u16 capilib_data_b3_req(struct list_head *head, u16 applid, + u32 ncci, u16 msgid) + + +Macros to extract/set element values from/in a CAPI message header +(from ): + +Get Macro Set Macro Element (Type) + +CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16) +CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16) +CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8) +CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8) +CAPIMSG_CMD(m) - Command*256 + + Subcommand (u16) +CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16) + +CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI + (u32) +CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16) + diff --git a/trunk/Documentation/kernel-doc-nano-HOWTO.txt b/trunk/Documentation/kernel-doc-nano-HOWTO.txt index 026ec7d57384..4d04572b6549 100644 --- a/trunk/Documentation/kernel-doc-nano-HOWTO.txt +++ b/trunk/Documentation/kernel-doc-nano-HOWTO.txt @@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants. Inside a struct description, you can use the "private:" and "public:" comment tags. Structure fields that are inside a "private:" area -are not listed in the generated output documentation. +are not listed in the generated output documentation. The "private:" +and "public:" tags must begin immediately following a "/*" comment +marker. They may optionally include comments between the ":" and the +ending "*/" marker. Example: @@ -283,7 +286,7 @@ Example: struct my_struct { int a; int b; -/* private: */ +/* private: internal use only */ int c; }; diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 600cdd72900c..0bf8a882ee9e 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus usbcore.blinkenlights=1 +Hyphens (dashes) and underscores are equivalent in parameter names, so + log_buf_len=1M print-fatal-signals=1 +can also be entered as + log-buf-len=1M print_fatal_signals=1 + + This document may not be entirely up to date and comprehensive. The command "modinfo -p ${modulename}" shows a current list of all parameters of a loadable module. Loadable modules, after being loaded into the running kernel, also @@ -50,7 +56,6 @@ parameter is applicable: ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. JOY Appropriate joystick support is enabled. - KMEMTRACE kmemtrace is enabled. LIBATA Libata driver is enabled LP Printer support is enabled. LOOP Loopback device support is enabled. @@ -323,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file flushed before they will be reused, which is a lot of faster - amd_iommu_size= [HW,X86-64] - Define the size of the aperture for the AMD IOMMU - driver. Possible values are: - '32M', '64M' (default), '128M', '256M', '512M', '1G' - amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: , @@ -345,7 +345,7 @@ and is between 256 and 4096 characters. It is defined in the file not play well with APC CPU idle - disable it if you have APC and your system crashes randomly. - apic= [APIC,i386] Advanced Programmable Interrupt Controller + apic= [APIC,X86-32] Advanced Programmable Interrupt Controller Change the output verbosity whilst booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output @@ -640,6 +640,13 @@ and is between 256 and 4096 characters. It is defined in the file DMA-API debugging code disables itself because the architectural default is too low. + dma_debug_driver= + With this option the DMA-API debugging driver + filter feature can be enabled at boot time. Just + pass the driver to filter for as the parameter. + The filter can be disabled or changed to another + driver later using sysfs. + dscc4.setup= [NET] dtc3181e= [HW,SCSI] @@ -702,7 +709,7 @@ and is between 256 and 4096 characters. It is defined in the file to discrete, to make X server driver able to add WB entry later. This parameter enables that. - enable_timer_pin_1 [i386,x86-64] + enable_timer_pin_1 [X86] Enable PIN 1 of APIC timer Can be useful to work around chipset bugs (in particular on some ATI chipsets). @@ -746,12 +753,25 @@ and is between 256 and 4096 characters. It is defined in the file ia64_pal_cache_flush instead of SAL_CACHE_FLUSH. ftrace=[tracer] - [ftrace] will set and start the specified tracer + [FTRACE] will set and start the specified tracer as early as possible in order to facilitate early boot debugging. ftrace_dump_on_oops - [ftrace] will dump the trace buffers on oops. + [FTRACE] will dump the trace buffers on oops. + + ftrace_filter=[function-list] + [FTRACE] Limit the functions traced by the function + tracer at boot up. function-list is a comma separated + list of functions. This list can be changed at run + time by the set_ftrace_filter file in the debugfs + tracing directory. + + ftrace_notrace=[function-list] + [FTRACE] Do not trace the functions specified in + function-list. This list can be changed at run time + by the set_ftrace_notrace file in the debugfs + tracing directory. gamecon.map[2|3]= [HW,JOY] Multisystem joystick and NES/SNES/PSX pad @@ -775,7 +795,7 @@ and is between 256 and 4096 characters. It is defined in the file hashdist= [KNL,NUMA] Large hashes allocated during boot are distributed across NUMA nodes. Defaults on - for IA-64, off otherwise. + for 64bit NUMA, off otherwise. Format: 0 | 1 (for off | on) hcl= [IA-64] SGI's Hardware Graph compatibility layer @@ -867,11 +887,8 @@ and is between 256 and 4096 characters. It is defined in the file ide-core.nodma= [HW] (E)IDE subsystem Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc - .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom - .chs .ignore_cable are additional options - See Documentation/ide/ide.txt. - - idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed + .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr + .cdrom .chs .ignore_cable are additional options See Documentation/ide/ide.txt. ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem @@ -908,6 +925,12 @@ and is between 256 and 4096 characters. It is defined in the file Formt: { "sha1" | "md5" } default: "sha1" + ima_tcb [IMA] + Load a policy which meets the needs of the Trusted + Computing Base. This means IMA will measure all + programs exec'd, files mmap'd for exec, and all files + opened for read by uid=0. + in2000= [HW,SCSI] See header of drivers/scsi/in2000.c. @@ -1048,15 +1071,6 @@ and is between 256 and 4096 characters. It is defined in the file use the HighMem zone if it exists, and the Normal zone if it does not. - kmemtrace.enable= [KNL,KMEMTRACE] Format: { yes | no } - Controls whether kmemtrace is enabled - at boot-time. - - kmemtrace.subbufs=n [KNL,KMEMTRACE] Overrides the number of - subbufs kmemtrace's relay channel has. Set this - higher than default (KMEMTRACE_N_SUBBUFS in code) if - you experience buffer overruns. - kgdboc= [HW] kgdb over consoles. Requires a tty driver that supports console polling. (only serial suported for now) @@ -1066,6 +1080,10 @@ and is between 256 and 4096 characters. It is defined in the file Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. + kmemleak= [KNL] Boot-time kmemleak enable/disable + Valid arguments: on, off + Default: on + kstack=N [X86] Print N words from the kernel stack in oops dumps. @@ -1529,6 +1547,10 @@ and is between 256 and 4096 characters. It is defined in the file register save and restore. The kernel will only save legacy floating-point registers on task switch. + noxsave [BUGS=X86] Disables x86 extended register state save + and restore using xsave. The kernel will fallback to + enabling legacy floating-point and sse state. + nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or wfi(ARM) instruction doesn't work correctly and not to use it. This is also useful when using JTAG debugger. @@ -1565,6 +1587,9 @@ and is between 256 and 4096 characters. It is defined in the file noinitrd [RAM] Tells the kernel not to load any configured initial RAM disk. + nointremap [X86-64, Intel-IOMMU] Do not enable interrupt + remapping. + nointroute [IA-64] nojitter [IA64] Disables jitter checking for ITC timers. @@ -1620,6 +1645,8 @@ and is between 256 and 4096 characters. It is defined in the file nowb [ARM] + nox2apic [X86-64,APIC] Do not enable x2APIC mode. + nptcg= [IA64] Override max number of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or SAL PALO. @@ -1648,6 +1675,14 @@ and is between 256 and 4096 characters. It is defined in the file oprofile.timer= [HW] Use timer interrupt instead of performance counters + oprofile.cpu_type= Force an oprofile cpu type + This might be useful if you have an older oprofile + userland or if you want common events. + Format: { archperfmon } + archperfmon: [X86] Force use of architectural + perfmon on Intel CPUs instead of the + CPU specific event set. + osst= [HW,SCSI] SCSI Tape Driver Format: , See also Documentation/scsi/st.txt. diff --git a/trunk/Documentation/kmemleak.txt b/trunk/Documentation/kmemleak.txt new file mode 100644 index 000000000000..0112da3b9ab8 --- /dev/null +++ b/trunk/Documentation/kmemleak.txt @@ -0,0 +1,142 @@ +Kernel Memory Leak Detector +=========================== + +Introduction +------------ + +Kmemleak provides a way of detecting possible kernel memory leaks in a +way similar to a tracing garbage collector +(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors), +with the difference that the orphan objects are not freed but only +reported via /sys/kernel/debug/kmemleak. A similar method is used by the +Valgrind tool (memcheck --leak-check) to detect the memory leaks in +user-space applications. + +Usage +----- + +CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel +thread scans the memory every 10 minutes (by default) and prints any new +unreferenced objects found. To trigger an intermediate scan and display +all the possible memory leaks: + + # mount -t debugfs nodev /sys/kernel/debug/ + # cat /sys/kernel/debug/kmemleak + +Note that the orphan objects are listed in the order they were allocated +and one object at the beginning of the list may cause other subsequent +objects to be reported as orphan. + +Memory scanning parameters can be modified at run-time by writing to the +/sys/kernel/debug/kmemleak file. The following parameters are supported: + + off - disable kmemleak (irreversible) + stack=on - enable the task stacks scanning + stack=off - disable the tasks stacks scanning + scan=on - start the automatic memory scanning thread + scan=off - stop the automatic memory scanning thread + scan= - set the automatic memory scanning period in seconds (0 + to disable it) + +Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on +the kernel command line. + +Basic Algorithm +--------------- + +The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and +friends are traced and the pointers, together with additional +information like size and stack trace, are stored in a prio search tree. +The corresponding freeing function calls are tracked and the pointers +removed from the kmemleak data structures. + +An allocated block of memory is considered orphan if no pointer to its +start address or to any location inside the block can be found by +scanning the memory (including saved registers). This means that there +might be no way for the kernel to pass the address of the allocated +block to a freeing function and therefore the block is considered a +memory leak. + +The scanning algorithm steps: + + 1. mark all objects as white (remaining white objects will later be + considered orphan) + 2. scan the memory starting with the data section and stacks, checking + the values against the addresses stored in the prio search tree. If + a pointer to a white object is found, the object is added to the + gray list + 3. scan the gray objects for matching addresses (some white objects + can become gray and added at the end of the gray list) until the + gray set is finished + 4. the remaining white objects are considered orphan and reported via + /sys/kernel/debug/kmemleak + +Some allocated memory blocks have pointers stored in the kernel's +internal data structures and they cannot be detected as orphans. To +avoid this, kmemleak can also store the number of values pointing to an +address inside the block address range that need to be found so that the +block is not considered a leak. One example is __vmalloc(). + +Kmemleak API +------------ + +See the include/linux/kmemleak.h header for the functions prototype. + +kmemleak_init - initialize kmemleak +kmemleak_alloc - notify of a memory block allocation +kmemleak_free - notify of a memory block freeing +kmemleak_not_leak - mark an object as not a leak +kmemleak_ignore - do not scan or report an object as leak +kmemleak_scan_area - add scan areas inside a memory block +kmemleak_no_scan - do not scan a memory block +kmemleak_erase - erase an old value in a pointer variable +kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness +kmemleak_free_recursive - as kmemleak_free but checks the recursiveness + +Dealing with false positives/negatives +-------------------------------------- + +The false negatives are real memory leaks (orphan objects) but not +reported by kmemleak because values found during the memory scanning +point to such objects. To reduce the number of false negatives, kmemleak +provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and +kmemleak_erase functions (see above). The task stacks also increase the +amount of false negatives and their scanning is not enabled by default. + +The false positives are objects wrongly reported as being memory leaks +(orphan). For objects known not to be leaks, kmemleak provides the +kmemleak_not_leak function. The kmemleak_ignore could also be used if +the memory block is known not to contain other pointers and it will no +longer be scanned. + +Some of the reported leaks are only transient, especially on SMP +systems, because of pointers temporarily stored in CPU registers or +stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing +the minimum age of an object to be reported as a memory leak. + +Limitations and Drawbacks +------------------------- + +The main drawback is the reduced performance of memory allocation and +freeing. To avoid other penalties, the memory scanning is only performed +when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is +intended for debugging purposes where the performance might not be the +most important requirement. + +To keep the algorithm simple, kmemleak scans for values pointing to any +address inside a block's address range. This may lead to an increased +number of false negatives. However, it is likely that a real memory leak +will eventually become visible. + +Another source of false negatives is the data stored in non-pointer +values. In a future version, kmemleak could only scan the pointer +members in the allocated structures. This feature would solve many of +the false negative cases described above. + +The tool can report false positives. These are cases where an allocated +block doesn't need to be freed (some cases in the init_call functions), +the pointer is calculated by other methods than the usual container_of +macro or the pointer is stored in a location not scanned by kmemleak. + +Page allocations and ioremap are not tracked. Only the ARM and x86 +architectures are currently supported. diff --git a/trunk/Documentation/laptops/thinkpad-acpi.txt b/trunk/Documentation/laptops/thinkpad-acpi.txt index 3d7650768bb5..e7e9a69069e1 100644 --- a/trunk/Documentation/laptops/thinkpad-acpi.txt +++ b/trunk/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.22 - November 23rd, 2008 + Version 0.23 + April 10th, 2009 Borislav Deianov Henrique de Moraes Holschuh diff --git a/trunk/Documentation/lockdep-design.txt b/trunk/Documentation/lockdep-design.txt index 938ea22f2cc0..e20d913d5914 100644 --- a/trunk/Documentation/lockdep-design.txt +++ b/trunk/Documentation/lockdep-design.txt @@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example: The bit position indicates STATE, STATE-read, for each of the states listed above, and the character displayed in each indicates: - '.' acquired while irqs disabled - '+' acquired in irq context - '-' acquired with irqs enabled + '.' acquired while irqs disabled and not in irq context + '-' acquired in irq context + '+' acquired with irqs enabled '?' acquired in irq context with irqs enabled. Unused mutexes cannot be part of the cause of an error. diff --git a/trunk/Documentation/logo.gif b/trunk/Documentation/logo.gif new file mode 100644 index 000000000000..2eae75fecfb9 Binary files /dev/null and b/trunk/Documentation/logo.gif differ diff --git a/trunk/Documentation/logo.svg b/trunk/Documentation/logo.svg deleted file mode 100644 index cb9e4851d8c3..000000000000 --- a/trunk/Documentation/logo.svg +++ /dev/null @@ -1,2911 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - image/svg+xml - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/trunk/Documentation/logo.txt b/trunk/Documentation/logo.txt index a2e62445e28e..296f0f7f67eb 100644 --- a/trunk/Documentation/logo.txt +++ b/trunk/Documentation/logo.txt @@ -1,4 +1,13 @@ -Tux is taking a three month sabbatical to work as a barber, so Tuz is -standing in. He's taken pains to ensure you'll hardly notice. +This is the full-colour version of the currently unofficial Linux logo +("currently unofficial" just means that there has been no paperwork and +that I have not really announced it yet). It was created by Larry Ewing, +and is freely usable as long as you acknowledge Larry as the original +artist. + +Note that there are black-and-white versions of this available that +scale down to smaller sizes and are better for letterheads or whatever +you want to use it for: for the full range of logos take a look at +Larry's web-page: + + http://www.isc.tamu.edu/~lewing/linux/ -Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA. diff --git a/trunk/Documentation/memory-barriers.txt b/trunk/Documentation/memory-barriers.txt index f5b7127f54ac..7f5809eddee6 100644 --- a/trunk/Documentation/memory-barriers.txt +++ b/trunk/Documentation/memory-barriers.txt @@ -31,6 +31,7 @@ Contents: - Locking functions. - Interrupt disabling functions. + - Sleep and wake-up functions. - Miscellaneous functions. (*) Inter-CPU locking barrier effects. @@ -1217,6 +1218,132 @@ barriers are required in such a situation, they must be provided from some other means. +SLEEP AND WAKE-UP FUNCTIONS +--------------------------- + +Sleeping and waking on an event flagged in global data can be viewed as an +interaction between two pieces of data: the task state of the task waiting for +the event and the global data used to indicate the event. To make sure that +these appear to happen in the right order, the primitives to begin the process +of going to sleep, and the primitives to initiate a wake up imply certain +barriers. + +Firstly, the sleeper normally follows something like this sequence of events: + + for (;;) { + set_current_state(TASK_UNINTERRUPTIBLE); + if (event_indicated) + break; + schedule(); + } + +A general memory barrier is interpolated automatically by set_current_state() +after it has altered the task state: + + CPU 1 + =============================== + set_current_state(); + set_mb(); + STORE current->state + + LOAD event_indicated + +set_current_state() may be wrapped by: + + prepare_to_wait(); + prepare_to_wait_exclusive(); + +which therefore also imply a general memory barrier after setting the state. +The whole sequence above is available in various canned forms, all of which +interpolate the memory barrier in the right place: + + wait_event(); + wait_event_interruptible(); + wait_event_interruptible_exclusive(); + wait_event_interruptible_timeout(); + wait_event_killable(); + wait_event_timeout(); + wait_on_bit(); + wait_on_bit_lock(); + + +Secondly, code that performs a wake up normally follows something like this: + + event_indicated = 1; + wake_up(&event_wait_queue); + +or: + + event_indicated = 1; + wake_up_process(event_daemon); + +A write memory barrier is implied by wake_up() and co. if and only if they wake +something up. The barrier occurs before the task state is cleared, and so sits +between the STORE to indicate the event and the STORE to set TASK_RUNNING: + + CPU 1 CPU 2 + =============================== =============================== + set_current_state(); STORE event_indicated + set_mb(); wake_up(); + STORE current->state + STORE current->state + LOAD event_indicated + +The available waker functions include: + + complete(); + wake_up(); + wake_up_all(); + wake_up_bit(); + wake_up_interruptible(); + wake_up_interruptible_all(); + wake_up_interruptible_nr(); + wake_up_interruptible_poll(); + wake_up_interruptible_sync(); + wake_up_interruptible_sync_poll(); + wake_up_locked(); + wake_up_locked_poll(); + wake_up_nr(); + wake_up_poll(); + wake_up_process(); + + +[!] Note that the memory barriers implied by the sleeper and the waker do _not_ +order multiple stores before the wake-up with respect to loads of those stored +values after the sleeper has called set_current_state(). For instance, if the +sleeper does: + + set_current_state(TASK_INTERRUPTIBLE); + if (event_indicated) + break; + __set_current_state(TASK_RUNNING); + do_something(my_data); + +and the waker does: + + my_data = value; + event_indicated = 1; + wake_up(&event_wait_queue); + +there's no guarantee that the change to event_indicated will be perceived by +the sleeper as coming after the change to my_data. In such a circumstance, the +code on both sides must interpolate its own memory barriers between the +separate data accesses. Thus the above sleeper ought to do: + + set_current_state(TASK_INTERRUPTIBLE); + if (event_indicated) { + smp_rmb(); + do_something(my_data); + } + +and the waker should do: + + my_data = value; + smp_wmb(); + event_indicated = 1; + wake_up(&event_wait_queue); + + MISCELLANEOUS FUNCTIONS ----------------------- @@ -1366,7 +1493,7 @@ WHERE ARE MEMORY BARRIERS NEEDED? Under normal operation, memory operation reordering is generally not going to be a problem as a single-threaded linear piece of code will still appear to -work correctly, even if it's in an SMP kernel. There are, however, three +work correctly, even if it's in an SMP kernel. There are, however, four circumstances in which reordering definitely _could_ be a problem: (*) Interprocessor interaction. diff --git a/trunk/Documentation/networking/ip-sysctl.txt b/trunk/Documentation/networking/ip-sysctl.txt index ec5de02f543f..b121c5db707f 100644 --- a/trunk/Documentation/networking/ip-sysctl.txt +++ b/trunk/Documentation/networking/ip-sysctl.txt @@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max sctp_wmem - vector of 3 INTEGERs: min, default, max See tcp_wmem for a description. -UNDOCUMENTED: /proc/sys/net/core/* - dev_weight FIXME +dev_weight - INTEGER + The maximum number of packets that kernel can handle on a NAPI + interrupt, it's a Per-CPU variable. + + Default: 64 /proc/sys/net/unix/* - max_dgram_qlen FIXME +max_dgram_qlen - INTEGER + The maximum length of dgram socket receive queue + + Default: 10 + + +UNDOCUMENTED: /proc/sys/net/irda/* fast_poll_increase FIXME diff --git a/trunk/Documentation/powerpc/booting-without-of.txt b/trunk/Documentation/powerpc/booting-without-of.txt index 0ab0230cbcb0..d16b7a1c3793 100644 --- a/trunk/Documentation/powerpc/booting-without-of.txt +++ b/trunk/Documentation/powerpc/booting-without-of.txt @@ -43,12 +43,11 @@ Table of Contents 2) Representing devices without a current OF specification a) PHY nodes b) Interrupt controllers - c) CFI or JEDEC memory-mapped NOR flash - d) 4xx/Axon EMAC ethernet nodes - e) Xilinx IP cores - f) USB EHCI controllers - g) MDIO on GPIOs - h) SPI busses + c) 4xx/Axon EMAC ethernet nodes + d) Xilinx IP cores + e) USB EHCI controllers + f) MDIO on GPIOs + g) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -999,7 +998,7 @@ compatibility. translation of SOC addresses for memory mapped SOC registers. - bus-frequency: Contains the bus frequency for the SOC node. Typically, the value of this field is filled in by the boot - loader. + loader. Recommended properties: @@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model. device_type = "open-pic"; }; - c) CFI or JEDEC memory-mapped NOR flash - - Flash chips (Memory Technology Devices) are often used for solid state - file systems on embedded devices. - - - compatible : should contain the specific model of flash chip(s) - used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range of the flash chip - - bank-width : Width (in bytes) of the flash bank. Equal to the - device width times the number of interleaved chips. - - device-width : (optional) Width of a single flash chip. If - omitted, assumed to be equal to 'bank-width'. - - #address-cells, #size-cells : Must be present if the flash has - sub-nodes representing partitions (see below). In this case - both #address-cells and #size-cells must be equal to 1. - - For JEDEC compatible devices, the following additional properties - are defined: - - - vendor-id : Contains the flash chip's vendor id (1 byte). - - device-id : Contains the flash chip's device id (1 byte). - - In addition to the information on the flash bank itself, the - device tree may optionally contain additional information - describing partitions of the flash address space. This can be - used on platforms which have strong conventions about which - portions of the flash are used for what purposes, but which don't - use an on-flash partition table such as RedBoot. - - Each partition is represented as a sub-node of the flash device. - Each node's name represents the name of the corresponding - partition of the flash device. - - Flash partitions - - reg : The partition's offset and size within the flash bank. - - label : (optional) The label / name for this flash partition. - If omitted, the label is taken from the node name (excluding - the unit address). - - read-only : (optional) This parameter, if present, is a hint to - Linux that this flash partition should only be mounted - read-only. This is usually used for flash partitions - containing early-boot firmware images or data which should not - be clobbered. - - Example: - - flash@ff000000 { - compatible = "amd,am29lv128ml", "cfi-flash"; - reg = ; - bank-width = <4>; - device-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - fs@0 { - label = "fs"; - reg = <0 f80000>; - }; - firmware@f80000 { - label ="firmware"; - reg = ; - read-only; - }; - }; - - d) 4xx/Axon EMAC ethernet nodes + c) 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also the Axon bridge. To operate this needs to interact with a ths @@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a - e) Xilinx IP cores + d) Xilinx IP cores The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range @@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model. listed above, nodes for these devices should include a phy-handle property, and may include other common network device properties like local-mac-address. - + iv) Xilinx Uartlite Xilinx uartlite devices are simple fixed speed serial ports. @@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model. - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required - f) USB EHCI controllers + e) USB EHCI controllers Required properties: - compatible : should be "usb-ehci". @@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - g) MDIO on GPIOs + f) MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio @@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; - h) SPI (Serial Peripheral Interface) busses + g) SPI (Serial Peripheral Interface) busses SPI busses can be described with a node for the SPI master device and a set of child nodes for each SPI slave on the bus. For this diff --git a/trunk/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/trunk/Documentation/powerpc/dts-bindings/mtd-physmap.txt new file mode 100644 index 000000000000..667c9bde8699 --- /dev/null +++ b/trunk/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -0,0 +1,80 @@ +CFI or JEDEC memory-mapped NOR flash + +Flash chips (Memory Technology Devices) are often used for solid state +file systems on embedded devices. + + - compatible : should contain the specific model of flash chip(s) + used, if known, followed by either "cfi-flash" or "jedec-flash" + - reg : Address range(s) of the flash chip(s) + It's possible to (optionally) define multiple "reg" tuples so that + non-identical NOR chips can be described in one flash node. + - bank-width : Width (in bytes) of the flash bank. Equal to the + device width times the number of interleaved chips. + - device-width : (optional) Width of a single flash chip. If + omitted, assumed to be equal to 'bank-width'. + - #address-cells, #size-cells : Must be present if the flash has + sub-nodes representing partitions (see below). In this case + both #address-cells and #size-cells must be equal to 1. + +For JEDEC compatible devices, the following additional properties +are defined: + + - vendor-id : Contains the flash chip's vendor id (1 byte). + - device-id : Contains the flash chip's device id (1 byte). + +In addition to the information on the flash bank itself, the +device tree may optionally contain additional information +describing partitions of the flash address space. This can be +used on platforms which have strong conventions about which +portions of the flash are used for what purposes, but which don't +use an on-flash partition table such as RedBoot. + +Each partition is represented as a sub-node of the flash device. +Each node's name represents the name of the corresponding +partition of the flash device. + +Flash partitions + - reg : The partition's offset and size within the flash bank. + - label : (optional) The label / name for this flash partition. + If omitted, the label is taken from the node name (excluding + the unit address). + - read-only : (optional) This parameter, if present, is a hint to + Linux that this flash partition should only be mounted + read-only. This is usually used for flash partitions + containing early-boot firmware images or data which should not + be clobbered. + +Example: + + flash@ff000000 { + compatible = "amd,am29lv128ml", "cfi-flash"; + reg = ; + bank-width = <4>; + device-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + fs@0 { + label = "fs"; + reg = <0 f80000>; + }; + firmware@f80000 { + label ="firmware"; + reg = ; + read-only; + }; + }; + +Here an example with multiple "reg" tuples: + + flash@f0000000,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,PC48F4400P0VB", "cfi-flash"; + reg = <0 0x00000000 0x02000000 + 0 0x02000000 0x02000000>; + bank-width = <2>; + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; diff --git a/trunk/Documentation/scheduler/sched-rt-group.txt b/trunk/Documentation/scheduler/sched-rt-group.txt index 5ba4d3fc625a..1df7f9cdab05 100644 --- a/trunk/Documentation/scheduler/sched-rt-group.txt +++ b/trunk/Documentation/scheduler/sched-rt-group.txt @@ -4,6 +4,7 @@ CONTENTS ======== +0. WARNING 1. Overview 1.1 The problem 1.2 The solution @@ -14,6 +15,23 @@ CONTENTS 3. Future plans +0. WARNING +========== + + Fiddling with these settings can result in an unstable system, the knobs are + root only and assumes root knows what he is doing. + +Most notable: + + * very small values in sched_rt_period_us can result in an unstable + system when the period is smaller than either the available hrtimer + resolution, or the time it takes to handle the budget refresh itself. + + * very small values in sched_rt_runtime_us can result in an unstable + system when the runtime is so small the system has difficulty making + forward progress (NOTE: the migration thread and kstopmachine both + are real-time processes). + 1. Overview =========== @@ -169,7 +187,7 @@ get their allocated time. Implementing SCHED_EDF might take a while to complete. Priority Inheritance is the biggest challenge as the current linux PI infrastructure is geared towards -the limited static priority levels 0-139. With deadline scheduling you need to +the limited static priority levels 0-99. With deadline scheduling you need to do deadline inheritance (since priority is inversely proportional to the deadline delta (deadline - now). diff --git a/trunk/Documentation/sound/alsa/HD-Audio-Models.txt b/trunk/Documentation/sound/alsa/HD-Audio-Models.txt index 8eec05bc079e..322869fc8a9e 100644 --- a/trunk/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/trunk/Documentation/sound/alsa/HD-Audio-Models.txt @@ -334,6 +334,7 @@ STAC9227/9228/9229/927x ref-no-jd Reference board without HP/Mic jack detection 3stack D965 3stack 5stack D965 5stack + SPDIF + 5stack-no-fp D965 5stack without front panel dell-3stack Dell Dimension E520 dell-bios Fixes with Dell BIOS setup auto BIOS setup (default) diff --git a/trunk/Documentation/sound/alsa/Procfile.txt b/trunk/Documentation/sound/alsa/Procfile.txt index bba2dbb79d81..cfac20cf9e33 100644 --- a/trunk/Documentation/sound/alsa/Procfile.txt +++ b/trunk/Documentation/sound/alsa/Procfile.txt @@ -104,6 +104,11 @@ card*/pcm*/xrun_debug When this value is greater than 1, the driver will show the stack trace additionally. This may help the debugging. + Since 2.6.30, this option also enables the hwptr check using + jiffies. This detects spontaneous invalid pointer callback + values, but can be lead to too much corrections for a (mostly + buggy) hardware that doesn't give smooth pointer updates. + card*/pcm*/sub*/info The general information of this PCM sub-stream. diff --git a/trunk/Documentation/sysctl/kernel.txt b/trunk/Documentation/sysctl/kernel.txt index f11ca7979fa6..322a00bb99d9 100644 --- a/trunk/Documentation/sysctl/kernel.txt +++ b/trunk/Documentation/sysctl/kernel.txt @@ -32,6 +32,7 @@ show up in /proc/sys/kernel: - kstack_depth_to_print [ X86 only ] - l2cr [ PPC only ] - modprobe ==> Documentation/debugging-modules.txt +- modules_disabled - msgmax - msgmnb - msgmni @@ -184,6 +185,16 @@ kernel stack. ============================================================== +modules_disabled: + +A toggle value indicating if modules are allowed to be loaded +in an otherwise modular kernel. This toggle defaults to off +(0), but can be set true (1). Once true, modules can be +neither loaded nor unloaded, and the toggle cannot be set back +to false. + +============================================================== + osrelease, ostype & version: # cat osrelease diff --git a/trunk/Documentation/sysctl/vm.txt b/trunk/Documentation/sysctl/vm.txt index 97c4b3284329..c302ddf629a0 100644 --- a/trunk/Documentation/sysctl/vm.txt +++ b/trunk/Documentation/sysctl/vm.txt @@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm: - nr_hugepages - nr_overcommit_hugepages - nr_pdflush_threads -- nr_pdflush_threads_min -- nr_pdflush_threads_max - nr_trim_pages (only if CONFIG_MMU=n) - numa_zonelist_order - oom_dump_tasks @@ -90,6 +88,10 @@ will itself start writeback. If dirty_bytes is written, dirty_ratio becomes a function of its value (dirty_bytes / the amount of dirtyable system memory). +Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any +value lower than this limit will be ignored and the old configuration will be +retained. + ============================================================== dirty_expire_centisecs @@ -465,32 +467,6 @@ The default value is 0. ============================================================== -nr_pdflush_threads_min - -This value controls the minimum number of pdflush threads. - -At boot time, the kernel will create and maintain 'nr_pdflush_threads_min' -threads for the kernel's lifetime. - -The default value is 2. The minimum value you can specify is 1, and -the maximum value is the current setting of 'nr_pdflush_threads_max'. - -See 'nr_pdflush_threads_max' below for more information. - -============================================================== - -nr_pdflush_threads_max - -This value controls the maximum number of pdflush threads that can be -created. The pdflush algorithm will create a new pdflush thread (up to -this maximum) if no pdflush threads have been available for >= 1 second. - -The default value is 8. The minimum value you can specify is the -current value of 'nr_pdflush_threads_min' and the -maximum is 1000. - -============================================================== - overcommit_memory: This value contains a flag that enables memory overcommitment. diff --git a/trunk/Documentation/sysfs-rules.txt b/trunk/Documentation/sysfs-rules.txt index 6049a2a84dda..5d8bc2cd250c 100644 --- a/trunk/Documentation/sysfs-rules.txt +++ b/trunk/Documentation/sysfs-rules.txt @@ -113,7 +113,7 @@ versions of the sysfs interface. "devices" directory at /sys/subsystem//devices. If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be - ignored. If it does not exist, you have always to scan all three + ignored. If it does not exist, you always have to scan all three places, as the kernel is free to move a subsystem from one place to the other, as long as the devices are still reachable by the same subsystem name. diff --git a/trunk/Documentation/trace/events.txt b/trunk/Documentation/trace/events.txt new file mode 100644 index 000000000000..f157d7594ea7 --- /dev/null +++ b/trunk/Documentation/trace/events.txt @@ -0,0 +1,90 @@ + Event Tracing + + Documentation written by Theodore Ts'o + Updated by Li Zefan + +1. Introduction +=============== + +Tracepoints (see Documentation/trace/tracepoints.txt) can be used +without creating custom kernel modules to register probe functions +using the event tracing infrastructure. + +Not all tracepoints can be traced using the event tracing system; +the kernel developer must provide code snippets which define how the +tracing information is saved into the tracing buffer, and how the +tracing information should be printed. + +2. Using Event Tracing +====================== + +2.1 Via the 'set_event' interface +--------------------------------- + +The events which are available for tracing can be found in the file +/debug/tracing/available_events. + +To enable a particular event, such as 'sched_wakeup', simply echo it +to /debug/tracing/set_event. For example: + + # echo sched_wakeup >> /debug/tracing/set_event + +[ Note: '>>' is necessary, otherwise it will firstly disable + all the events. ] + +To disable an event, echo the event name to the set_event file prefixed +with an exclamation point: + + # echo '!sched_wakeup' >> /debug/tracing/set_event + +To disable all events, echo an empty line to the set_event file: + + # echo > /debug/tracing/set_event + +To enable all events, echo '*:*' or '*:' to the set_event file: + + # echo *:* > /debug/tracing/set_event + +The events are organized into subsystems, such as ext4, irq, sched, +etc., and a full event name looks like this: :. The +subsystem name is optional, but it is displayed in the available_events +file. All of the events in a subsystem can be specified via the syntax +":*"; for example, to enable all irq events, you can use the +command: + + # echo 'irq:*' > /debug/tracing/set_event + +2.2 Via the 'enable' toggle +--------------------------- + +The events available are also listed in /debug/tracing/events/ hierarchy +of directories. + +To enable event 'sched_wakeup': + + # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable + +To disable it: + + # echo 0 > /debug/tracing/events/sched/sched_wakeup/enable + +To enable all events in sched subsystem: + + # echo 1 > /debug/tracing/events/sched/enable + +To eanble all events: + + # echo 1 > /debug/tracing/events/enable + +When reading one of these enable files, there are four results: + + 0 - all events this file affects are disabled + 1 - all events this file affects are enabled + X - there is a mixture of events enabled and disabled + ? - this file does not affect any event + +3. Defining an event-enabled tracepoint +======================================= + +See The example provided in samples/trace_events + diff --git a/trunk/Documentation/trace/ftrace.txt b/trunk/Documentation/trace/ftrace.txt index fd9a3e693813..2a82d8602944 100644 --- a/trunk/Documentation/trace/ftrace.txt +++ b/trunk/Documentation/trace/ftrace.txt @@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured. Function call tracer to trace all kernel functions. - "function_graph_tracer" + "function_graph" Similar to the function tracer except that the function tracer probes the functions on their entry @@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice values starting at 100 (nice -20). Below is a quick chart to map the kernel priority to user land priorities. - Kernel priority: 0 to 99 ==> user RT priority 99 to 0 - Kernel priority: 100 to 139 ==> user nice -20 to 19 - Kernel priority: 140 ==> idle task priority + Kernel Space User Space + =============================================================== + 0(high) to 98(low) user RT priority 99(high) to 1(low) + with SCHED_RR or SCHED_FIFO + --------------------------------------------------------------- + 99 sched_priority is not used in scheduling + decisions(it must be specified as 0) + --------------------------------------------------------------- + 100(high) to 139(low) user nice -20(high) to 19(low) + --------------------------------------------------------------- + 140 idle task priority + --------------------------------------------------------------- The task states are: diff --git a/trunk/Documentation/trace/power.txt b/trunk/Documentation/trace/power.txt new file mode 100644 index 000000000000..cd805e16dc27 --- /dev/null +++ b/trunk/Documentation/trace/power.txt @@ -0,0 +1,17 @@ +The power tracer collects detailed information about C-state and P-state +transitions, instead of just looking at the high-level "average" +information. + +There is a helper script found in scrips/tracing/power.pl in the kernel +sources which can be used to parse this information and create a +Scalable Vector Graphics (SVG) picture from the trace data. + +To use this tracer: + + echo 0 > /sys/kernel/debug/tracing/tracing_enabled + echo power > /sys/kernel/debug/tracing/current_tracer + echo 1 > /sys/kernel/debug/tracing/tracing_enabled + sleep 1 + echo 0 > /sys/kernel/debug/tracing/tracing_enabled + cat /sys/kernel/debug/tracing/trace | \ + perl scripts/tracing/power.pl > out.sv diff --git a/trunk/Documentation/x86/boot.txt b/trunk/Documentation/x86/boot.txt index e0203662f9e9..8da3a795083f 100644 --- a/trunk/Documentation/x86/boot.txt +++ b/trunk/Documentation/x86/boot.txt @@ -50,6 +50,10 @@ Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical pointer to single linked list of struct setup_data. +Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment + beyond the kernel_alignment added, new init_size and + pref_address fields. Added extended boot loader IDs. + **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -168,12 +172,13 @@ Offset Proto Name Meaning 021C/4 2.00+ ramdisk_size initrd size (set by boot loader) 0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only 0224/2 2.01+ heap_end_ptr Free memory after setup end -0226/2 N/A pad1 Unused +0226/1 2.02+(3 ext_loader_ver Extended boot loader version +0227/1 2.02+(3 ext_loader_type Extended boot loader ID 0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line 022C/4 2.03+ ramdisk_max Highest legal initrd address 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/1 N/A pad2 Unused +0235/1 2.10+ min_alignment Minimum alignment, as a power of two 0236/2 N/A pad3 Unused 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture @@ -182,6 +187,8 @@ Offset Proto Name Meaning 024C/4 2.08+ payload_length Length of kernel payload 0250/8 2.09+ setup_data 64-bit physical pointer to linked list of struct setup_data +0258/8 2.10+ pref_address Preferred loading address +0260/4 2.10+ init_size Linear memory required during initialization (1) For backwards compatibility, if the setup_sects field contains 0, the real value is 4. @@ -190,6 +197,8 @@ Offset Proto Name Meaning field are unusable, which means the size of a bzImage kernel cannot be determined. +(3) Ignored, but safe to set, for boot protocols 2.02-2.09. + If the "HdrS" (0x53726448) magic number is not found at offset 0x202, the boot protocol version is "old". Loading an old kernel, the following parameters should be assumed: @@ -343,18 +352,32 @@ Protocol: 2.00+ 0xTV here, where T is an identifier for the boot loader and V is a version number. Otherwise, enter 0xFF here. + For boot loader IDs above T = 0xD, write T = 0xE to this field and + write the extended ID minus 0x10 to the ext_loader_type field. + Similarly, the ext_loader_ver field can be used to provide more than + four bits for the bootloader version. + + For example, for T = 0x15, V = 0x234, write: + + type_of_loader <- 0xE4 + ext_loader_type <- 0x05 + ext_loader_ver <- 0x23 + Assigned boot loader ids: 0 LILO (0x00 reserved for pre-2.00 bootloader) 1 Loadlin 2 bootsect-loader (0x20, all other values reserved) - 3 SYSLINUX - 4 EtherBoot + 3 Syslinux + 4 Etherboot/gPXE 5 ELILO 7 GRUB - 8 U-BOOT + 8 U-Boot 9 Xen A Gujin B Qemu + C Arcturus Networks uCbootloader + E Extended (see ext_loader_type) + F Special (0xFF = undefined) Please contact if you need a bootloader ID value assigned. @@ -453,6 +476,35 @@ Protocol: 2.01+ Set this field to the offset (from the beginning of the real-mode code) of the end of the setup stack/heap, minus 0x0200. +Field name: ext_loader_ver +Type: write (optional) +Offset/size: 0x226/1 +Protocol: 2.02+ + + This field is used as an extension of the version number in the + type_of_loader field. The total version number is considered to be + (type_of_loader & 0x0f) + (ext_loader_ver << 4). + + The use of this field is boot loader specific. If not written, it + is zero. + + Kernels prior to 2.6.31 did not recognize this field, but it is safe + to write for protocol version 2.02 or higher. + +Field name: ext_loader_type +Type: write (obligatory if (type_of_loader & 0xf0) == 0xe0) +Offset/size: 0x227/1 +Protocol: 2.02+ + + This field is used as an extension of the type number in + type_of_loader field. If the type in type_of_loader is 0xE, then + the actual type is (ext_loader_type + 0x10). + + This field is ignored if the type in type_of_loader is not 0xE. + + Kernels prior to 2.6.31 did not recognize this field, but it is safe + to write for protocol version 2.02 or higher. + Field name: cmd_line_ptr Type: write (obligatory) Offset/size: 0x228/4 @@ -482,11 +534,19 @@ Protocol: 2.03+ 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) Field name: kernel_alignment -Type: read (reloc) +Type: read/modify (reloc) Offset/size: 0x230/4 -Protocol: 2.05+ +Protocol: 2.05+ (read), 2.10+ (modify) + + Alignment unit required by the kernel (if relocatable_kernel is + true.) A relocatable kernel that is loaded at an alignment + incompatible with the value in this field will be realigned during + kernel initialization. - Alignment unit required by the kernel (if relocatable_kernel is true.) + Starting with protocol version 2.10, this reflects the kernel + alignment preferred for optimal performance; it is possible for the + loader to modify this field to permit a lesser alignment. See the + min_alignment and pref_address field below. Field name: relocatable_kernel Type: read (reloc) @@ -498,6 +558,22 @@ Protocol: 2.05+ After loading, the boot loader must set the code32_start field to point to the loaded code, or to a boot loader hook. +Field name: min_alignment +Type: read (reloc) +Offset/size: 0x235/1 +Protocol: 2.10+ + + This field, if nonzero, indicates as a power of two the minimum + alignment required, as opposed to preferred, by the kernel to boot. + If a boot loader makes use of this field, it should update the + kernel_alignment field with the alignment unit desired; typically: + + kernel_alignment = 1 << min_alignment + + There may be a considerable performance cost with an excessively + misaligned kernel. Therefore, a loader should typically try each + power-of-two alignment from kernel_alignment down to this alignment. + Field name: cmdline_size Type: read Offset/size: 0x238/4 @@ -582,6 +658,36 @@ Protocol: 2.09+ sure to consider the case where the linked list already contains entries. +Field name: pref_address +Type: read (reloc) +Offset/size: 0x258/8 +Protocol: 2.10+ + + This field, if nonzero, represents a preferred load address for the + kernel. A relocating bootloader should attempt to load at this + address if possible. + + A non-relocatable kernel will unconditionally move itself and to run + at this address. + +Field name: init_size +Type: read +Offset/size: 0x25c/4 + + This field indicates the amount of linear contiguous memory starting + at the kernel runtime start address that the kernel needs before it + is capable of examining its memory map. This is not the same thing + as the total amount of memory the kernel needs to boot, but it can + be used by a relocating boot loader to help select a safe load + address for the kernel. + + The kernel runtime start address is determined by the following algorithm: + + if (relocatable_kernel) + runtime_start = align_up(load_address, kernel_alignment) + else + runtime_start = pref_address + **** THE IMAGE CHECKSUM diff --git a/trunk/Documentation/x86/x86_64/boot-options.txt b/trunk/Documentation/x86/x86_64/boot-options.txt index 34c13040a718..2db5893d6c97 100644 --- a/trunk/Documentation/x86/x86_64/boot-options.txt +++ b/trunk/Documentation/x86/x86_64/boot-options.txt @@ -150,11 +150,6 @@ NUMA Otherwise, the remaining system RAM is allocated to an additional node. - numa=hotadd=percent - Only allow hotadd memory to preallocate page structures upto - percent of already available memory. - numa=hotadd=0 will disable hotadd memory. - ACPI acpi=off Don't enable ACPI diff --git a/trunk/Documentation/x86/x86_64/mm.txt b/trunk/Documentation/x86/x86_64/mm.txt index 29b52b14d0b4..d6498e3cd713 100644 --- a/trunk/Documentation/x86/x86_64/mm.txt +++ b/trunk/Documentation/x86/x86_64/mm.txt @@ -6,10 +6,11 @@ Virtual memory map with 4 level page tables: 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm hole caused by [48:63] sign extension ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole -ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory -ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole -ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space -ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) +ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory +ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole +ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space +ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole +ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB) ... unused hole ... ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0 ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index cb9571042f21..c944d618dc83 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -71,7 +71,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info -T: SCM tree type and location. Type is one of: git, hg, quilt. +T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -159,7 +159,8 @@ F: drivers/net/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net -S: Orphan +M: alan@lxorguk.ukuu.org.uk +S: Odd Fixes F: drivers/serial/8250* F: include/linux/serial_8250.h @@ -434,7 +435,7 @@ F: arch/alpha/ AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER P: Thomas Dahlmann -M: thomas.dahlmann@amd.com +M: dahlmann.thomas@arcor.de L: linux-geode@lists.infradead.org (moderated for non-subscribers) S: Supported F: drivers/usb/gadget/amd5536udc.* @@ -624,6 +625,7 @@ M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://gitorious.org/linux-gemini/mainline.git S: Maintained +F: arch/arm/mach-gemini/ ARM/EBSA110 MACHINE SUPPORT P: Russell King @@ -650,6 +652,7 @@ P: Paulius Zaleckas M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +F: arch/arm/mm/*-fa* ARM/FOOTBRIDGE ARCHITECTURE P: Russell King @@ -1132,17 +1135,17 @@ F: fs/bfs/ F: include/linux/bfs_fs.h BLACKFIN ARCHITECTURE -P: Bryan Wu -M: cooloney@kernel.org +P: Mike Frysinger +M: vapier@gentoo.org L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: arch/blackfin/ BLACKFIN EMAC DRIVER -P: Bryan Wu -M: cooloney@kernel.org -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +P: Michael Hennerich +M: michael.hennerich@analog.com +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/net/bfin_mac.* @@ -1150,7 +1153,7 @@ F: drivers/net/bfin_mac.* BLACKFIN RTC DRIVER P: Mike Frysinger M: vapier.adi@gmail.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/rtc/rtc-bfin.c @@ -1158,7 +1161,7 @@ F: drivers/rtc/rtc-bfin.c BLACKFIN SERIAL DRIVER P: Sonic Zhang M: sonic.zhang@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/serial/bfin_5xx.c @@ -1166,7 +1169,7 @@ F: drivers/serial/bfin_5xx.c BLACKFIN WATCHDOG DRIVER P: Mike Frysinger M: vapier.adi@gmail.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/watchdog/bfin_wdt.c @@ -1174,7 +1177,7 @@ F: drivers/watchdog/bfin_wdt.c BLACKFIN I2C TWI DRIVER P: Sonic Zhang M: sonic.zhang@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org/ S: Supported F: drivers/i2c/busses/i2c-bfin-twi.c @@ -1337,12 +1340,9 @@ L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ S: Supported F: arch/powerpc/include/asm/cell*.h -F: arch/powerpc/include/asm/lv1call.h -F: arch/powerpc/include/asm/ps3*.h F: arch/powerpc/include/asm/spu*.h F: arch/powerpc/oprofile/*cell* F: arch/powerpc/platforms/cell/ -F: arch/powerpc/platforms/ps3/ CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: P: David Vrabel @@ -1434,6 +1434,14 @@ P: Russell King M: linux@arm.linux.org.uk F: include/linux/clk.h +CISCO FCOE HBA DRIVER +P: Abhijeet Joglekar +M: abjoglek@cisco.com +P: Joe Eykholt +M: jeykholt@cisco.com +L: linux-scsi@vger.kernel.org +S: Supported + CODA FILE SYSTEM P: Jan Harkes M: jaharkes@cs.cmu.edu @@ -1535,6 +1543,13 @@ W: http://www.fi.muni.cz/~kas/cosa/ S: Maintained F: drivers/net/wan/cosa* +CPMAC ETHERNET DRIVER +P: Florian Fainelli +M: florian@openwrt.org +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/cpmac.c + CPU FREQUENCY DRIVERS P: Dave Jones M: davej@redhat.com @@ -1787,10 +1802,10 @@ F: drivers/char/epca* F: drivers/char/digi* DIRECTORY NOTIFICATION (DNOTIFY) -P: Stephen Rothwell -M: sfr@canb.auug.org.au +P: Eric Paris +M: eparis@parisplace.org L: linux-kernel@vger.kernel.org -S: Supported +S: Maintained F: Documentation/filesystems/dnotify.txt F: fs/notify/dnotify/ F: include/linux/dnotify.h @@ -1964,10 +1979,20 @@ F: Documentation/edac.txt F: drivers/edac/edac_* F: include/linux/edac.h +EDAC-AMD64 +P: Doug Thompson +M: dougthompson@xmission.com +P: Borislav Petkov +M: borislav.petkov@amd.com +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) +W: bluesmoke.sourceforge.net +S: Supported +F: drivers/edac/amd64_edac* + EDAC-E752X P: Mark Gross -P: Doug Thompson M: mark.gross@intel.com +P: Doug Thompson M: dougthompson@xmission.com L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net @@ -2244,7 +2269,7 @@ P: Li Yang M: leoli@freescale.com P: Zhang Wei M: zw@zh-kernel.org -L: linuxppc-embedded@ozlabs.org +L: linuxppc-dev@ozlabs.org L: linux-kernel@vger.kernel.org S: Maintained F: drivers/dma/fsldma.* @@ -2761,7 +2786,7 @@ IDE SUBSYSTEM P: Bartlomiej Zolnierkiewicz M: bzolnier@gmail.com L: linux-ide@vger.kernel.org -T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git S: Maintained F: Documentation/ide/ F: drivers/ide/ @@ -2833,6 +2858,8 @@ P: John McCutchan M: john@johnmccutchan.com P: Robert Love M: rlove@rlove.org +P: Eric Paris +M: eparis@parisplace.org L: linux-kernel@vger.kernel.org S: Maintained F: Documentation/filesystems/inotify.txt @@ -3345,6 +3372,12 @@ F: Documentation/trace/kmemtrace.txt F: include/trace/kmemtrace.h F: kernel/trace/kmemtrace.c +KMEMLEAK +P: Catalin Marinas +M: catalin.marinas@arm.com +L: linux-kernel@vger.kernel.org +S: Maintained + KPROBES P: Ananth N Mavinakayanahalli M: ananth@in.ibm.com @@ -3437,11 +3470,10 @@ L: linuxppc-dev@ozlabs.org S: Maintained LINUX FOR POWERPC EMBEDDED MPC5XXX -P: Sylvain Munaut -M: tnt@246tNt.com P: Grant Likely M: grant.likely@secretlab.ca L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC4XX @@ -3451,7 +3483,7 @@ P: Matt Porter M: mporter@kernel.crashing.org W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git S: Maintained LINUX FOR POWERPC EMBEDDED XILINX VIRTEX @@ -3459,6 +3491,7 @@ P: Grant Likely M: grant.likely@secretlab.ca W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC8XX @@ -3994,8 +4027,8 @@ NETWORKING [GENERAL] P: David S. Miller M: davem@davemloft.net L: netdev@vger.kernel.org -W: http://linux-net.osdl.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git +W: http://www.linuxfoundation.org/en/Net +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained F: net/ F: include/net/ @@ -4036,6 +4069,13 @@ F: net/wireless/ F: include/net/ieee80211* F: include/net/wireless.h +NETWORKING DRIVERS +L: netdev@vger.kernel.org +W: http://www.linuxfoundation.org/en/Net +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git +S: Odd Fixes +F: drivers/net/ + NETXEN (1/10) GbE SUPPORT P: Dhananjay Phadke M: dhananjay@netxen.com @@ -4185,7 +4225,7 @@ P: Joel Becker M: joel.becker@oracle.com L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) W: http://oss.oracle.com/projects/ocfs2/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git S: Supported F: Documentation/filesystems/ocfs2.txt F: Documentation/filesystems/dlmfs.txt @@ -4371,6 +4411,16 @@ S: Maintained F: include/linux/delayacct.h F: kernel/delayacct.c +PERFORMANCE COUNTER SUBSYSTEM +P: Peter Zijlstra +M: a.p.zijlstra@chello.nl +P: Paul Mackerras +M: paulus@samba.org +P: Ingo Molnar +M: mingo@elte.hu +L: linux-kernel@vger.kernel.org +S: Supported + PERSONALITY HANDLING P: Christoph Hellwig M: hch@infradead.org @@ -4507,7 +4557,9 @@ F: arch/powerpc/include/asm/ps3*.h F: arch/powerpc/platforms/ps3/ F: drivers/*/ps3* F: drivers/ps3/ +F: drivers/rtc/rtc-ps3.c F: drivers/usb/host/*ps3.c +F: sound/ppc/snd_ps3* PS3VRAM DRIVER P: Jim Paris @@ -4515,6 +4567,19 @@ M: jim@jtan.com L: cbe-oss-dev@ozlabs.org S: Maintained +PTRACE SUPPORT +P: Roland McGrath +M: roland@redhat.com +P: Oleg Nesterov +M: oleg@redhat.com +L: linux-kernel@vger.kernel.org +S: Maintained +F: include/asm-generic/syscall.h +F: include/linux/ptrace.h +F: include/linux/regset.h +F: include/linux/tracehook.h +F: kernel/ptrace.c + PVRUSB2 VIDEO4LINUX DRIVER P: Mike Isely M: isely@pobox.com @@ -4660,13 +4725,13 @@ F: kernel/rcutorture.c RDC R-321X SoC P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: linux-kernel@vger.kernel.org S: Maintained RDC R6040 FAST ETHERNET DRIVER P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: netdev@vger.kernel.org S: Maintained F: drivers/net/r6040.c @@ -5560,6 +5625,14 @@ M: ian@mnementh.co.uk S: Maintained F: drivers/mmc/host/tmio_mmc.* +TMPFS (SHMEM FILESYSTEM) +P: Hugh Dickins +M: hugh.dickins@tiscali.co.uk +L: linux-mm@kvack.org +S: Maintained +F: include/linux/shmem_fs.h +F: mm/shmem.c + TPM DEVICE DRIVER P: Debora Velarde M: debora@linux.vnet.ibm.com @@ -5585,6 +5658,7 @@ P: Alan Cox M: alan@lxorguk.ukuu.org.uk L: linux-kernel@vger.kernel.org S: Maintained +T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ TULIP NETWORK DRIVERS P: Grant Grundler diff --git a/trunk/Makefile b/trunk/Makefile index 9e5dc8f0ef47..03373bb703ca 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc3 -NAME = Temporary Tasmanian Devil +EXTRAVERSION = +NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* # To see a list of typical targets execute "make help" @@ -533,7 +533,7 @@ endif include $(srctree)/arch/$(SRCARCH)/Makefile -ifneq (CONFIG_FRAME_WARN,0) +ifneq ($(CONFIG_FRAME_WARN),0) KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif @@ -1293,7 +1293,7 @@ help: @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[ois] - Build specified target only' @echo ' dir/file.ko - Build module including final link' - @echo ' prepare - Set up for building external modules' + @echo ' modules_prepare - Set up for building external modules' @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' @echo ' kernelrelease - Output the release version string' @@ -1421,7 +1421,9 @@ $(clean-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) clean: rm-dirs := $(MODVERDIR) -clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers +clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ + $(KBUILD_EXTMOD)/Module.markers \ + $(KBUILD_EXTMOD)/modules.order clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) diff --git a/trunk/arch/alpha/include/asm/barrier.h b/trunk/arch/alpha/include/asm/barrier.h index ac78eba909bc..ce8860a0b32d 100644 --- a/trunk/arch/alpha/include/asm/barrier.h +++ b/trunk/arch/alpha/include/asm/barrier.h @@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory") __asm__ __volatile__("mb": : :"memory") #ifdef CONFIG_SMP +#define __ASM_SMP_MB "\tmb\n" #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() #else +#define __ASM_SMP_MB #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() diff --git a/trunk/arch/alpha/include/asm/futex.h b/trunk/arch/alpha/include/asm/futex.h index 6a332a9f099c..945de222ab91 100644 --- a/trunk/arch/alpha/include/asm/futex.h +++ b/trunk/arch/alpha/include/asm/futex.h @@ -1,6 +1,116 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_ALPHA_FUTEX_H +#define _ASM_ALPHA_FUTEX_H -#include +#ifdef __KERNEL__ -#endif +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + __ASM_SMP_MB \ + "1: ldl_l %0,0(%2)\n" \ + insn \ + "2: stl_c %1,0(%2)\n" \ + " beq %1,4f\n" \ + " mov $31,%1\n" \ + "3: .subsection 2\n" \ + "4: br 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .long 1b-.\n" \ + " lda $31,3b-1b(%1)\n" \ + " .long 2b-.\n" \ + " lda $31,3b-2b(%1)\n" \ + " .previous\n" \ + : "=&r" (oldval), "=&r"(ret) \ + : "r" (uaddr), "r"(oparg) \ + : "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev, cmp; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + __ASM_SMP_MB + "1: ldl_l %0,0(%2)\n" + " cmpeq %0,%3,%1\n" + " beq %1,3f\n" + " mov %4,%1\n" + "2: stl_c %1,0(%2)\n" + " beq %1,4f\n" + "3: .subsection 2\n" + "4: br 1b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .long 1b-.\n" + " lda $31,3b-1b(%0)\n" + " .long 2b-.\n" + " lda $31,3b-2b(%0)\n" + " .previous\n" + : "=&r"(prev), "=&r"(cmp) + : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_ALPHA_FUTEX_H */ diff --git a/trunk/arch/alpha/include/asm/percpu.h b/trunk/arch/alpha/include/asm/percpu.h index e9e0bb5a23bf..06c5c7a4afd3 100644 --- a/trunk/arch/alpha/include/asm/percpu.h +++ b/trunk/arch/alpha/include/asm/percpu.h @@ -1,7 +1,9 @@ #ifndef __ALPHA_PERCPU_H #define __ALPHA_PERCPU_H + #include #include +#include /* * Determine the real variable name from the name visible in the @@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #endif /* SMP */ -#include +#ifdef CONFIG_SMP +#define PER_CPU_BASE_SECTION ".data.percpu" +#else +#define PER_CPU_BASE_SECTION ".data" +#endif + +#ifdef CONFIG_SMP + +#ifdef MODULE +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#else +#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" +#endif +#define PER_CPU_FIRST_SECTION ".first" + +#else + +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#define PER_CPU_FIRST_SECTION "" + +#endif + +#define PER_CPU_ATTRIBUTES #endif /* __ALPHA_PERCPU_H */ diff --git a/trunk/arch/alpha/include/asm/uaccess.h b/trunk/arch/alpha/include/asm/uaccess.h index 163f3053001c..b49ec2f8d6e3 100644 --- a/trunk/arch/alpha/include/asm/uaccess.h +++ b/trunk/arch/alpha/include/asm/uaccess.h @@ -507,5 +507,7 @@ struct exception_table_entry (pc) + (_fixup)->fixup.bits.nextinsn; \ }) +#define ARCH_HAS_SORT_EXTABLE +#define ARCH_HAS_SEARCH_EXTABLE #endif /* __ALPHA_UACCESS_H */ diff --git a/trunk/arch/alpha/kernel/Makefile b/trunk/arch/alpha/kernel/Makefile index a427538252f8..7739a62440a7 100644 --- a/trunk/arch/alpha/kernel/Makefile +++ b/trunk/arch/alpha/kernel/Makefile @@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o + alpha_ksyms.o systbls.o err_common.o io.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o @@ -43,6 +43,10 @@ else # Misc support obj-$(CONFIG_ALPHA_SRM) += srmcons.o +ifdef CONFIG_BINFMT_AOUT +obj-y += binfmt_loader.o +endif + # Core logic support obj-$(CONFIG_ALPHA_APECS) += core_apecs.o obj-$(CONFIG_ALPHA_CIA) += core_cia.o diff --git a/trunk/arch/alpha/kernel/binfmt_loader.c b/trunk/arch/alpha/kernel/binfmt_loader.c index 4a0af906b00a..3fcfad410130 100644 --- a/trunk/arch/alpha/kernel/binfmt_loader.c +++ b/trunk/arch/alpha/kernel/binfmt_loader.c @@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = { static int __init init_loader_binfmt(void) { - return register_binfmt(&loader_format); + return insert_binfmt(&loader_format); } arch_initcall(init_loader_binfmt); diff --git a/trunk/arch/alpha/kernel/err_ev6.c b/trunk/arch/alpha/kernel/err_ev6.c index 985e5c1681ac..8ca6345bf131 100644 --- a/trunk/arch/alpha/kernel/err_ev6.c +++ b/trunk/arch/alpha/kernel/err_ev6.c @@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print) } void -ev6_machine_check(u64 vector, u64 la_ptr) +ev6_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; diff --git a/trunk/arch/alpha/kernel/err_ev7.c b/trunk/arch/alpha/kernel/err_ev7.c index 73770c6ca013..d738a67112d4 100644 --- a/trunk/arch/alpha/kernel/err_ev7.c +++ b/trunk/arch/alpha/kernel/err_ev7.c @@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr, } void -ev7_machine_check(u64 vector, u64 la_ptr) +ev7_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; char *saved_err_prefix = err_print_prefix; @@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header) switch(header->type) { case EL_TYPE__PAL__LOGOUT_FRAME: - printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n", + printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n", err_print_prefix, packet->by_type.logout.whami, packet->by_type.logout.rbox_whami); diff --git a/trunk/arch/alpha/kernel/err_impl.h b/trunk/arch/alpha/kernel/err_impl.h index 3c12258158e6..0c010ca4611e 100644 --- a/trunk/arch/alpha/kernel/err_impl.h +++ b/trunk/arch/alpha/kernel/err_impl.h @@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets * ev7_collect_logout_frame_subpackets(struct el_subpacket *, struct ev7_lf_subpackets *); extern void ev7_register_error_handlers(void); -extern void ev7_machine_check(u64, u64); +extern void ev7_machine_check(unsigned long, unsigned long); /* * err_ev6.c */ extern void ev6_register_error_handlers(void); extern int ev6_process_logout_frame(struct el_common *, int); -extern void ev6_machine_check(u64, u64); +extern void ev6_machine_check(unsigned long, unsigned long); /* * err_marvel.c */ -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_register_error_handlers(void); /* * err_titan.c */ extern int titan_process_logout_frame(struct el_common *, int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_register_error_handlers(void); extern int privateer_process_logout_frame(struct el_common *, int); -extern void privateer_machine_check(u64, u64); +extern void privateer_machine_check(unsigned long, unsigned long); diff --git a/trunk/arch/alpha/kernel/err_marvel.c b/trunk/arch/alpha/kernel/err_marvel.c index 6bfd243efba3..52a79dfc13c6 100644 --- a/trunk/arch/alpha/kernel/err_marvel.c +++ b/trunk/arch/alpha/kernel/err_marvel.c @@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) } void -marvel_machine_check(u64 vector, u64 la_ptr) +marvel_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL; diff --git a/trunk/arch/alpha/kernel/err_titan.c b/trunk/arch/alpha/kernel/err_titan.c index c7e28a88d6e3..f7ed97ce0dfd 100644 --- a/trunk/arch/alpha/kernel/err_titan.c +++ b/trunk/arch/alpha/kernel/err_titan.c @@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print) } void -titan_machine_check(u64 vector, u64 la_ptr) +titan_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = @@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print) } void -privateer_machine_check(u64 vector, u64 la_ptr) +privateer_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = diff --git a/trunk/arch/alpha/kernel/head.S b/trunk/arch/alpha/kernel/head.S index 7ac1f1372c36..4bdd1d2ff353 100644 --- a/trunk/arch/alpha/kernel/head.S +++ b/trunk/arch/alpha/kernel/head.S @@ -7,10 +7,11 @@ * the kernel global pointer and jump to the kernel entry-point. */ +#include #include #include -.section .text.head, "ax" +__HEAD .globl swapper_pg_dir .globl _stext swapper_pg_dir=SWAPPER_PGD diff --git a/trunk/arch/alpha/kernel/osf_sys.c b/trunk/arch/alpha/kernel/osf_sys.c index 42ee05981e71..9a3334ae282e 100644 --- a/trunk/arch/alpha/kernel/osf_sys.c +++ b/trunk/arch/alpha/kernel/osf_sys.c @@ -371,8 +371,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, int retval = -EINVAL; char *name; - lock_kernel(); - name = getname(path); retval = PTR_ERR(name); if (IS_ERR(name)) @@ -392,7 +390,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, } putname(name); out: - unlock_kernel(); return retval; } diff --git a/trunk/arch/alpha/kernel/proto.h b/trunk/arch/alpha/kernel/proto.h index 567f2598d090..3d2627ec9860 100644 --- a/trunk/arch/alpha/kernel/proto.h +++ b/trunk/arch/alpha/kernel/proto.h @@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops irongate_pci_ops; extern int irongate_pci_clr_err(void); extern void irongate_init_arch(void); -extern void irongate_machine_check(u64, u64); #define irongate_pci_tbi ((void *)0) /* core_lca.c */ @@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops marvel_pci_ops; extern void marvel_init_arch(void); extern void marvel_kill_arch(int); -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern int marvel_pa_to_nid(unsigned long); extern int marvel_cpuid_to_nid(int); @@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops titan_pci_ops; extern void titan_init_arch(void); extern void titan_kill_arch(int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct _alpha_agp_info *titan_agp_info(void); diff --git a/trunk/arch/alpha/kernel/sys_dp264.c b/trunk/arch/alpha/kernel/sys_dp264.c index 9c9d1fd4155f..5bd5259324b7 100644 --- a/trunk/arch/alpha/kernel/sys_dp264.c +++ b/trunk/arch/alpha/kernel/sys_dp264.c @@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } } -static void +static int dp264_set_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&dp264_irq_lock); cpu_set_irq_affinity(irq, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); + + return 0; } -static void +static int clipper_set_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&dp264_irq_lock); cpu_set_irq_affinity(irq - 16, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); + + return 0; } static struct hw_interrupt_type dp264_irq_type = { diff --git a/trunk/arch/alpha/kernel/sys_titan.c b/trunk/arch/alpha/kernel/sys_titan.c index 27f840a4ad3d..8dd239ebdb9e 100644 --- a/trunk/arch/alpha/kernel/sys_titan.c +++ b/trunk/arch/alpha/kernel/sys_titan.c @@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } -static void +static int titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&titan_irq_lock); titan_cpu_set_irq_affinity(irq - 16, *affinity); titan_update_irq_hw(titan_cached_irq_mask); spin_unlock(&titan_irq_lock); + + return 0; } static void diff --git a/trunk/arch/alpha/kernel/vmlinux.lds.S b/trunk/arch/alpha/kernel/vmlinux.lds.S index ef37fc1acaea..b9d6568e5f7f 100644 --- a/trunk/arch/alpha/kernel/vmlinux.lds.S +++ b/trunk/arch/alpha/kernel/vmlinux.lds.S @@ -16,7 +16,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/trunk/arch/alpha/mm/extable.c b/trunk/arch/alpha/mm/extable.c index dc7aeda15773..813c9b63c0e1 100644 --- a/trunk/arch/alpha/mm/extable.c +++ b/trunk/arch/alpha/mm/extable.c @@ -3,12 +3,71 @@ */ #include +#include #include +static inline unsigned long ex_to_addr(const struct exception_table_entry *x) +{ + return (unsigned long)&x->insn + x->insn; +} + +static void swap_ex(void *a, void *b, int size) +{ + struct exception_table_entry *ex_a = a, *ex_b = b; + unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b); + unsigned int t = ex_a->fixup.unit; + + ex_a->fixup.unit = ex_b->fixup.unit; + ex_b->fixup.unit = t; + ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn); + ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn); +} + +/* + * The exception table needs to be sorted so that the binary + * search that we use to find entries in it works properly. + * This is used both for the kernel exception table and for + * the exception tables of modules that get loaded. + */ +static int cmp_ex(const void *a, const void *b) +{ + const struct exception_table_entry *x = a, *y = b; + + /* avoid overflow */ + if (ex_to_addr(x) > ex_to_addr(y)) + return 1; + if (ex_to_addr(x) < ex_to_addr(y)) + return -1; + return 0; +} + void sort_extable(struct exception_table_entry *start, struct exception_table_entry *finish) { + sort(start, finish - start, sizeof(struct exception_table_entry), + cmp_ex, swap_ex); +} + +#ifdef CONFIG_MODULES +/* + * Any entry referring to the module init will be at the beginning or + * the end. + */ +void trim_init_extable(struct module *m) +{ + /*trim the beginning*/ + while (m->num_exentries && + within_module_init(ex_to_addr(&m->extable[0]), m)) { + m->extable++; + m->num_exentries--; + } + /*trim the end*/ + while (m->num_exentries && + within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]), + m)) + m->num_exentries--; } +#endif /* CONFIG_MODULES */ const struct exception_table_entry * search_extable(const struct exception_table_entry *first, @@ -20,7 +79,7 @@ search_extable(const struct exception_table_entry *first, unsigned long mid_value; mid = (last - first) / 2 + first; - mid_value = (unsigned long)&mid->insn + mid->insn; + mid_value = ex_to_addr(mid); if (mid_value == value) return mid; else if (mid_value < value) diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index e02b893fb909..9d02cdb15b23 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -273,6 +273,7 @@ config ARCH_EP93XX select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_HOLES_MEMORYMODEL help This enables support for the Cirrus EP93xx series of CPUs. @@ -454,6 +455,7 @@ config ARCH_MXC select ARCH_MTD_XIP select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for Freescale MXC/iMX-based family of processors @@ -486,8 +488,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT @@ -585,6 +585,8 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE + select COMMON_CLKDEV help Support for TI's DaVinci platform. @@ -740,6 +742,56 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" @@ -925,10 +977,9 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say Y. -config ARCH_FLATMEM_HAS_HOLES +config ARCH_HAS_HOLES_MEMORYMODEL bool - default y - depends on FLATMEM + default n # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE @@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX If in doubt, say N. -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - endif source "drivers/cpuidle/Kconfig" diff --git a/trunk/arch/arm/common/gic.c b/trunk/arch/arm/common/gic.c index c6884ba1d5ed..664c7b8b1ba8 100644 --- a/trunk/arch/arm/common/gic.c +++ b/trunk/arch/arm/common/gic.c @@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq) } #ifdef CONFIG_SMP -static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) +static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) { void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3); unsigned int shift = (irq % 4) * 8; @@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) val |= 1 << (cpu + shift); writel(val, reg); spin_unlock(&irq_controller_lock); + + return 0; } #endif @@ -253,9 +255,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) } #ifdef CONFIG_SMP -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq) +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(cpumask); + unsigned long map = *cpus_addr(*mask); /* this always happens on GIC0 */ writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); diff --git a/trunk/arch/arm/configs/davinci_all_defconfig b/trunk/arch/arm/configs/davinci_all_defconfig new file mode 100644 index 000000000000..eb2738b5be5f --- /dev/null +++ b/trunk/arch/arm/configs/davinci_all_defconfig @@ -0,0 +1,1784 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 08:16:53 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/arm/configs/kirkwood_defconfig b/trunk/arch/arm/configs/kirkwood_defconfig index c367ae44012e..dcf8153a947d 100644 --- a/trunk/arch/arm/configs/kirkwood_defconfig +++ b/trunk/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc5 -# Tue Mar 3 21:45:57 2009 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 11:58:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -89,6 +89,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -101,6 +102,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,6 +241,7 @@ CONFIG_AEABI=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -293,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y # @@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +696,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -724,8 +734,10 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set @@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1551,11 +1589,15 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1682,7 +1728,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/arm/configs/mv78xx0_defconfig b/trunk/arch/arm/configs/mv78xx0_defconfig index b0698722e0cb..398274b0771a 100644 --- a/trunk/arch/arm/configs/mv78xx0_defconfig +++ b/trunk/arch/arm/configs/mv78xx0_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 02:57:32 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:22:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,10 +98,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -247,6 +260,11 @@ CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -263,6 +281,8 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -376,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -465,6 +481,11 @@ CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -632,11 +669,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -654,19 +714,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -676,18 +742,20 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -799,44 +873,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -855,14 +949,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -877,10 +974,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -900,20 +1002,28 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -958,9 +1064,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1150,6 +1327,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/arm/configs/mx3_defconfig b/trunk/arch/arm/configs/mx3_defconfig index 72a8201a5370..20ada526f6de 100644 --- a/trunk/arch/arm/configs/mx3_defconfig +++ b/trunk/arch/arm/configs/mx3_defconfig @@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y # CONFIG_CPU_32=y CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y +# CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y diff --git a/trunk/arch/arm/configs/orion5x_defconfig b/trunk/arch/arm/configs/orion5x_defconfig index 020e6a8a9e5c..5b98f7645119 100644 --- a/trunk/arch/arm/configs/orion5x_defconfig +++ b/trunk/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Fri Aug 22 12:38:51 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:07:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Orion Implementations @@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_TS409=y @@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -269,6 +275,11 @@ CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -285,13 +296,18 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +424,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -486,6 +513,11 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -663,6 +709,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -680,19 +746,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -702,10 +774,12 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -911,14 +988,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1013,9 +1103,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1030,10 +1147,13 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1230,6 +1381,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1540,7 +1735,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/arm/configs/viper_defconfig b/trunk/arch/arm/configs/viper_defconfig index 30f463d2fa8a..6ab5dd5868de 100644 --- a/trunk/arch/arm/configs/viper_defconfig +++ b/trunk/arch/arm/configs/viper_defconfig @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation diff --git a/trunk/arch/arm/include/asm/assembler.h b/trunk/arch/arm/include/asm/assembler.h index 6116e4893c0a..15f8a092b700 100644 --- a/trunk/arch/arm/include/asm/assembler.h +++ b/trunk/arch/arm/include/asm/assembler.h @@ -114,3 +114,16 @@ .align 3; \ .long 9999b,9001f; \ .previous + +/* + * SMP data memory barrier + */ + .macro smp_dmb +#ifdef CONFIG_SMP +#if __LINUX_ARM_ARCH__ >= 7 + dmb +#elif __LINUX_ARM_ARCH__ == 6 + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif +#endif + .endm diff --git a/trunk/arch/arm/include/asm/atomic.h b/trunk/arch/arm/include/asm/atomic.h index ee99723b3a6c..16b52f397983 100644 --- a/trunk/arch/arm/include/asm/atomic.h +++ b/trunk/arch/arm/include/asm/atomic.h @@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i) : "cc"); } +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_add\n" +"1: ldrex %0, [%2]\n" +" add %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_add_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_add_return\n" "1: ldrex %0, [%2]\n" " add %0, %0, %3\n" @@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_sub\n" +"1: ldrex %0, [%2]\n" +" sub %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_sub_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_sub_return\n" "1: ldrex %0, [%2]\n" " sub %0, %0, %3\n" @@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } @@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { unsigned long oldval, res; + smp_mb(); + do { __asm__ __volatile__("@ atomic_cmpxchg\n" "ldrex %1, [%2]\n" @@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) : "cc"); } while (res); + smp_mb(); + return oldval; } @@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v) return val; } +#define atomic_add(i, v) (void) atomic_add_return(i, v) static inline int atomic_sub_return(int i, atomic_t *v) { @@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) return val; } +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { @@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i, v) (void) atomic_add_return(i, v) -#define atomic_inc(v) (void) atomic_add_return(1, v) -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) -#define atomic_dec(v) (void) atomic_sub_return(1, v) +#define atomic_inc(v) atomic_add(1, v) +#define atomic_dec(v) atomic_sub(1, v) #define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) @@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() #include #endif diff --git a/trunk/arch/arm/include/asm/cache.h b/trunk/arch/arm/include/asm/cache.h index cb7a9e97fd7e..feaa75f0013e 100644 --- a/trunk/arch/arm/include/asm/cache.h +++ b/trunk/arch/arm/include/asm/cache.h @@ -7,4 +7,20 @@ #define L1_CACHE_SHIFT 5 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +/* + * Memory returned by kmalloc() may be used for DMA, so we must make + * sure that all such allocations are cache aligned. Otherwise, + * unrelated code may cause parts of the buffer to be read into the + * cache before the transfer is done, causing old data to be seen by + * the CPU. + */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + +/* + * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. + */ +#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) +#define ARCH_SLAB_MINALIGN 8 +#endif + #endif diff --git a/trunk/arch/arm/include/asm/elf.h b/trunk/arch/arm/include/asm/elf.h index d7da19bcf928..c207504de84d 100644 --- a/trunk/arch/arm/include/asm/elf.h +++ b/trunk/arch/arm/include/asm/elf.h @@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t; #define EF_ARM_HASENTRY 0x00000002 /* All */ #define EF_ARM_RELEXEC 0x00000001 /* All */ -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 -#define R_ARM_V4BX 40 -#define R_ARM_PREL31 42 +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 +#define R_ARM_MOVW_ABS_NC 43 +#define R_ARM_MOVT_ABS 44 /* * These are used to set parameters in the core dumps. diff --git a/trunk/arch/arm/include/asm/flat.h b/trunk/arch/arm/include/asm/flat.h index 1d77e51907f6..59426a4595c9 100644 --- a/trunk/arch/arm/include/asm/flat.h +++ b/trunk/arch/arm/include/asm/flat.h @@ -5,9 +5,6 @@ #ifndef __ARM_FLAT_H__ #define __ARM_FLAT_H__ -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/trunk/arch/arm/include/asm/hardware/gic.h b/trunk/arch/arm/include/asm/hardware/gic.h index 4924914af188..7f34333bb545 100644 --- a/trunk/arch/arm/include/asm/hardware/gic.h +++ b/trunk/arch/arm/include/asm/hardware/gic.h @@ -36,7 +36,7 @@ void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); void gic_cpu_init(unsigned int gic_nr, void __iomem *base); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); #endif #endif diff --git a/trunk/arch/arm/include/asm/page.h b/trunk/arch/arm/include/asm/page.h index e6eb8a67b807..7b522770f29d 100644 --- a/trunk/arch/arm/include/asm/page.h +++ b/trunk/arch/arm/include/asm/page.h @@ -202,13 +202,6 @@ typedef struct page *pgtable_t; (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -/* - * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. - */ -#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) -#define ARCH_SLAB_MINALIGN 8 -#endif - #include #endif diff --git a/trunk/arch/arm/include/asm/smp.h b/trunk/arch/arm/include/asm/smp.h index fad70da5911d..5995935338e1 100644 --- a/trunk/arch/arm/include/asm/smp.h +++ b/trunk/arch/arm/include/asm/smp.h @@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid); /* * Raise an IPI cross call on CPUs in callmap. */ -extern void smp_cross_call(cpumask_t callmap); - -/* - * Broadcast a timer interrupt to the other CPUs. - */ -extern void smp_send_timer(void); +extern void smp_cross_call(const struct cpumask *mask); /* * Broadcast a clock event to other CPUs. */ -extern void smp_timer_broadcast(cpumask_t mask); +extern void smp_timer_broadcast(const struct cpumask *mask); /* * Boot a secondary CPU, and assign it the specified idle task. @@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu); extern void platform_cpu_enable(unsigned int cpu); extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask /* * Local timer interrupt handling function (can be IPI'ed). diff --git a/trunk/arch/arm/include/asm/system.h b/trunk/arch/arm/include/asm/system.h index bd4dc8ed53d5..d65b2f5bf41f 100644 --- a/trunk/arch/arm/include/asm/system.h +++ b/trunk/arch/arm/include/asm/system.h @@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size unsigned int tmp; #endif + smp_mb(); + switch (size) { #if __LINUX_ARM_ARCH__ >= 6 case 1: @@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size __bad_xchg(ptr, size), ret = 0; break; } + smp_mb(); return ret; } @@ -316,6 +319,12 @@ extern void enable_hlt(void); #include +#if __LINUX_ARM_ARCH__ < 6 + +#ifdef CONFIG_SMP +#error "SMP is not supported on this platform" +#endif + /* * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make * them available. @@ -329,6 +338,173 @@ extern void enable_hlt(void); #include #endif +#else /* __LINUX_ARM_ARCH__ >= 6 */ + +extern void __bad_cmpxchg(volatile void *ptr, int size); + +/* + * cmpxchg only support 32-bits operands on ARMv6. + */ + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long oldval, res; + + switch (size) { +#ifdef CONFIG_CPU_32v6K + case 1: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexb %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexbeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + case 2: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexh %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexheq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; +#endif /* CONFIG_CPU_32v6K */ + case 4: + do { + asm volatile("@ __cmpxchg4\n" + " ldrex %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + default: + __bad_cmpxchg(ptr, size); + oldval = 0; + } + + return oldval; +} + +static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + smp_mb(); + ret = __cmpxchg(ptr, old, new, size); + smp_mb(); + + return ret; +} + +#define cmpxchg(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + switch (size) { +#ifndef CONFIG_CPU_32v6K + case 1: + case 2: + ret = __cmpxchg_local_generic(ptr, old, new, size); + break; +#endif /* !CONFIG_CPU_32v6K */ + default: + ret = __cmpxchg(ptr, old, new, size); + } + + return ret; +} + +#define cmpxchg_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +#ifdef CONFIG_CPU_32v6K + +/* + * Note : ARMv7-M (currently unsupported by Linux) does not support + * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should + * not be allowed to use __cmpxchg64. + */ +static inline unsigned long long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + register unsigned long long oldval asm("r0"); + register unsigned long long __old asm("r2") = old; + register unsigned long long __new asm("r4") = new; + unsigned long res; + + do { + asm volatile( + " @ __cmpxchg8\n" + " ldrexd %1, %H1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " teqeq %H1, %H3\n" + " strexdeq %0, %4, %H4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (__old), "r" (__new) + : "memory", "cc"); + } while (res); + + return oldval; +} + +static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long ret; + + smp_mb(); + ret = __cmpxchg64(ptr, old, new); + smp_mb(); + + return ret; +} + +#define cmpxchg64(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#define cmpxchg64_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#else /* !CONFIG_CPU_32v6K */ + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* CONFIG_CPU_32v6K */ + +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) diff --git a/trunk/arch/arm/include/asm/unistd.h b/trunk/arch/arm/include/asm/unistd.h index 010618487cf1..94cc58ef61ae 100644 --- a/trunk/arch/arm/include/asm/unistd.h +++ b/trunk/arch/arm/include/asm/unistd.h @@ -387,6 +387,8 @@ #define __NR_dup3 (__NR_SYSCALL_BASE+358) #define __NR_pipe2 (__NR_SYSCALL_BASE+359) #define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) +#define __NR_preadv (__NR_SYSCALL_BASE+361) +#define __NR_pwritev (__NR_SYSCALL_BASE+362) /* * The following SWIs are ARM private. diff --git a/trunk/arch/arm/kernel/calls.S b/trunk/arch/arm/kernel/calls.S index 9ca8d13f05f7..1680e9e9c831 100644 --- a/trunk/arch/arm/kernel/calls.S +++ b/trunk/arch/arm/kernel/calls.S @@ -370,6 +370,8 @@ CALL(sys_dup3) CALL(sys_pipe2) /* 360 */ CALL(sys_inotify_init1) + CALL(sys_preadv) + CALL(sys_pwritev) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/trunk/arch/arm/kernel/elf.c b/trunk/arch/arm/kernel/elf.c index d4a0da1e48f4..950391f194c4 100644 --- a/trunk/arch/arm/kernel/elf.c +++ b/trunk/arch/arm/kernel/elf.c @@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 1; if (cpu_architecture() < CPU_ARCH_ARMv6) return 1; +#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) + /* + * If we have support for OABI programs, we can never allow NX + * support - our signal syscall restart mechanism relies upon + * being able to execute code placed on the user stack. + */ + return 1; +#else return 0; +#endif } EXPORT_SYMBOL(arm_elf_read_implies_exec); diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S index d662a2f1fd85..83b1da6b7baa 100644 --- a/trunk/arch/arm/kernel/entry-armv.S +++ b/trunk/arch/arm/kernel/entry-armv.S @@ -815,10 +815,7 @@ __kuser_helper_start: */ __kuser_memory_barrier: @ 0xffff0fa0 - -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) - mcr p15, 0, r0, c7, c10, 5 @ dmb -#endif + smp_dmb usr_ret lr .align 5 diff --git a/trunk/arch/arm/kernel/module.c b/trunk/arch/arm/kernel/module.c index d1731e39b496..bac03c81489d 100644 --- a/trunk/arch/arm/kernel/module.c +++ b/trunk/arch/arm/kernel/module.c @@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc = offset & 0x7fffffff; break; + case R_ARM_MOVW_ABS_NC: + case R_ARM_MOVT_ABS: + offset = *(u32 *)loc; + offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); + offset = (offset ^ 0x8000) - 0x8000; + + offset += sym->st_value; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + offset >>= 16; + + *(u32 *)loc &= 0xfff0f000; + *(u32 *)loc |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); diff --git a/trunk/arch/arm/kernel/smp.c b/trunk/arch/arm/kernel/smp.c index 7801aac3c043..6014dfd22af4 100644 --- a/trunk/arch/arm/kernel/smp.c +++ b/trunk/arch/arm/kernel/smp.c @@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; } -static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) +static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg) { unsigned long flags; unsigned int cpu; local_irq_save(flags); - for_each_cpu_mask(cpu, callmap) { + for_each_cpu(cpu, mask) { struct ipi_data *ipi = &per_cpu(ipi_data, cpu); spin_lock(&ipi->lock); @@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) /* * Call the platform specific cross-CPU call function. */ - smp_cross_call(callmap); + smp_cross_call(mask); local_irq_restore(flags); } -void arch_send_call_function_ipi(cpumask_t mask) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { send_ipi_message(mask, IPI_CALL_FUNC); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE); + send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); } void show_ipi_list(struct seq_file *p) @@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs) void smp_send_reschedule(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE); + send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); } -void smp_send_timer(void) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_TIMER); -} - -void smp_timer_broadcast(cpumask_t mask) +void smp_timer_broadcast(const struct cpumask *mask) { send_ipi_message(mask, IPI_TIMER); } @@ -517,7 +510,7 @@ void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_CPU_STOP); + send_ipi_message(&mask, IPI_CPU_STOP); } /* @@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier) return -EINVAL; } -static int -on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask) +static void +on_each_cpu_mask(void (*func)(void *), void *info, int wait, + const struct cpumask *mask) { - int ret = 0; - preempt_disable(); - ret = smp_call_function_mask(mask, func, info, wait); - if (cpu_isset(smp_processor_id(), mask)) + smp_call_function_many(mask, func, info, wait); + if (cpumask_test_cpu(smp_processor_id(), mask)) func(info); preempt_enable(); - - return ret; } /**********************************************************************/ @@ -602,20 +592,17 @@ void flush_tlb_all(void) void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t mask = mm->cpu_vm_mask; - - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = uaddr; - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr) void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = start; ta.ta_end = end; - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) diff --git a/trunk/arch/arm/lib/bitops.h b/trunk/arch/arm/lib/bitops.h index 2e787d40d599..c7f2627385e7 100644 --- a/trunk/arch/arm/lib/bitops.h +++ b/trunk/arch/arm/lib/bitops.h @@ -18,12 +18,14 @@ mov r2, #1 add r1, r1, r0, lsr #3 @ Get byte offset mov r3, r2, lsl r3 @ create mask + smp_dmb 1: ldrexb r2, [r1] ands r0, r2, r3 @ save old value of bit \instr r2, r2, r3 @ toggle bit strexb ip, r2, [r1] cmp ip, #0 bne 1b + smp_dmb cmp r0, #0 movne r0, #1 2: mov pc, lr diff --git a/trunk/arch/arm/mach-davinci/Kconfig b/trunk/arch/arm/mach-davinci/Kconfig index bac988e7a4c3..a9c78bc72b84 100644 --- a/trunk/arch/arm/mach-davinci/Kconfig +++ b/trunk/arch/arm/mach-davinci/Kconfig @@ -4,19 +4,56 @@ menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM644x EVM + + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. endmenu diff --git a/trunk/arch/arm/mach-davinci/Makefile b/trunk/arch/arm/mach-davinci/Makefile index 4dc458597f40..1674661942f3 100644 --- a/trunk/arch/arm/mach-davinci/Makefile +++ b/trunk/arch/arm/mach-davinci/Makefile @@ -5,7 +5,12 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o + gpio.o devices.o dma.o usb.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o + +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff --git a/trunk/arch/arm/mach-davinci/board-evm.c b/trunk/arch/arm/mach-davinci/board-dm644x-evm.c similarity index 55% rename from trunk/arch/arm/mach-davinci/board-evm.c rename to trunk/arch/arm/mach-davinci/board-dm644x-evm.c index 0b97a528902b..b2e7f9c63bc5 100644 --- a/trunk/arch/arm/mach-davinci/board-evm.c +++ b/trunk/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,15 +15,20 @@ #include #include #include +#include +#include #include #include #include #include +#include #include #include #include +#include +#include #include #include @@ -32,25 +37,34 @@ #include #include -#include +#include #include #include +#include +#include +#include +#include -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) +#define DAVINCI_CFC_ATA_BASE 0x01C66000 + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 + +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { .name = "bootloader", .offset = 0, - .size = 4 * SZ_64K, + .size = 5 * SZ_64K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next 1 sectors */ @@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; -#endif +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ +}; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; static struct resource ide_resources[] = { { @@ -131,8 +224,6 @@ static struct platform_device ide_dev = { }, }; -#endif - /*----------------------------------------------------------------------*/ /* @@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ setup_usb(500, 8); return 0; @@ -343,13 +436,119 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + DECLARE_MAC_BUF(mac_str); + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { + printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", + print_mac(mac_str, mac_addr)); + } +} + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, }; +int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_read); + +int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_write); + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, +}; + +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, { I2C_BOARD_INFO("pcf8574", 0x38), .platform_data = &pcf_data_u2, @@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, /* ALSO: * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) * - tvp5146 video decoder (0x5d) */ }; @@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), }; static void __init davinci_evm_map_io(void) { davinci_map_common_io(); + dm644x_init(); } -static __init void davinci_evm_init(void) +static int davinci_phy_fixup(struct phy_device *phydev) { - davinci_psc_init(); + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + #if defined(CONFIG_MTD_PHYSMAP) || \ defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); +#define HAS_NOR 1 +#else +#define HAS_NOR 0 #endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 #endif +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + + davinci_serial_init(&uart_config); + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } static __init void davinci_evm_irq_init(void) { - davinci_init_common_hw(); davinci_irq_init(); } -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, diff --git a/trunk/arch/arm/mach-davinci/clock.c b/trunk/arch/arm/mach-davinci/clock.c index abb92b7eca0c..f0baaa15a57e 100644 --- a/trunk/arch/arm/mach-davinci/clock.c +++ b/trunk/arch/arm/mach-davinci/clock.c @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,98 +23,50 @@ #include #include +#include #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +77,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +116,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v) { } -static int davinci_ck_show(struct seq_file *m, void *v) +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) { - struct clk *cp; + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* name */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); +static int davinci_ck_show(struct seq_file *m, void *v) +{ + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void) } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/trunk/arch/arm/mach-davinci/clock.h b/trunk/arch/arm/mach-davinci/clock.h index ed47079a52e4..35736ec202f8 100644 --- a/trunk/arch/arm/mach-davinci/clock.h +++ b/trunk/arch/arm/mach-davinci/clock.h @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,85 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include +#include + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } +int davinci_clk_init(struct davinci_clk *clocks); #endif diff --git a/trunk/arch/arm/mach-davinci/devices.c b/trunk/arch/arm/mach-davinci/devices.c index 808633f9f03c..a31370b93dd2 100644 --- a/trunk/arch/arm/mach-davinci/devices.c +++ b/trunk/arch/arm/mach-davinci/devices.c @@ -21,6 +21,10 @@ #include #include #include +#include +#include + +#define DAVINCI_I2C_BASE 0x01C21000 static struct resource i2c_resources[] = { { @@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = { void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } diff --git a/trunk/arch/arm/mach-davinci/dm644x.c b/trunk/arch/arm/mach-davinci/dm644x.c new file mode 100644 index 000000000000..d428ef192eac --- /dev/null +++ b/trunk/arch/arm/mach-davinci/dm644x.c @@ -0,0 +1,461 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#endif + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +}; + + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ +void __init dm644x_init(void) +{ + davinci_clk_init(dm644x_clks); + davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff --git a/trunk/arch/arm/mach-davinci/dma.c b/trunk/arch/arm/mach-davinci/dma.c new file mode 100644 index 000000000000..15e9eb158bb7 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/dma.c @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff --git a/trunk/arch/arm/mach-davinci/gpio.c b/trunk/arch/arm/mach-davinci/gpio.c index b49e9d092aab..1aba41c6351e 100644 --- a/trunk/arch/arm/mach-davinci/gpio.c +++ b/trunk/arch/arm/mach-davinci/gpio.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -36,9 +37,10 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; +static unsigned __initdata ngpio; /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } @@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void) { int i, base; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + /* The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + if (cpu_is_davinci_dm355()) { /* or dm335() */ + ngpio = 104; + } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ + ngpio = 71; + } else if (cpu_is_davinci_dm646x()) { + /* NOTE: each bank has several "reserved" bits, + * unusable as GPIOs. Only 33 of the GPIO numbers + * are usable, and we're not rejecting the others. + */ + ngpio = 43; + } else { + /* if cpu_is_davinci_dm643x() ngpio = 111 */ + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void) chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; + unsigned bank_irq; struct clk *clk; + u32 binten = 0; + + if (cpu_is_davinci_dm355()) { /* or dm335() */ + bank_irq = IRQ_DM355_GPIOBNK0; + } else if (cpu_is_davinci_dm644x()) { + bank_irq = IRQ_GPIOBNK0; + } else if (cpu_is_davinci_dm646x()) { + bank_irq = IRQ_DM646X_GPIOBNK0; + } else { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) + __raw_writel(binten, (void *__iomem) IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - arch_initcall(davinci_gpio_irq_setup); diff --git a/trunk/arch/arm/mach-davinci/id.c b/trunk/arch/arm/mach-davinci/id.c index bf067d604918..018b994cd794 100644 --- a/trunk/arch/arm/mach-davinci/id.c +++ b/trunk/arch/arm/mach-davinci/id.c @@ -15,7 +15,9 @@ #include #include -#define JTAG_ID_BASE 0x01c40028 +#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) + +static unsigned int davinci_revision; struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ @@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = { .manufacturer = 0x017, .type = 0x64460000, }, + { + /* DM646X */ + .part_no = 0xb770, + .variant = 0x0, + .manufacturer = 0x017, + .type = 0x64670000, + }, + { + /* DM355 */ + .part_no = 0xb73b, + .variant = 0x0, + .manufacturer = 0x00f, + .type = 0x03550000, + }, }; /* @@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void) { u32 dev_id, part_no; - dev_id = davinci_readl(JTAG_ID_BASE); + dev_id = __raw_readl(JTAG_ID_BASE); part_no = ((dev_id >> 12) & 0xffff); @@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void) { u32 variant; - variant = davinci_readl(JTAG_ID_BASE); + variant = __raw_readl(JTAG_ID_BASE); variant = (variant >> 28) & 0xf; return variant; } +unsigned int davinci_rev(void) +{ + return davinci_revision >> 16; +} +EXPORT_SYMBOL(davinci_rev); + void __init davinci_check_revision(void) { int i; @@ -75,7 +97,7 @@ void __init davinci_check_revision(void) /* First check only the major version in a safe way */ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } @@ -84,10 +106,11 @@ void __init davinci_check_revision(void) for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == davinci_ids[i].part_no && variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); + printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", + davinci_rev(), variant); } diff --git a/trunk/arch/arm/mach-davinci/include/mach/asp.h b/trunk/arch/arm/mach-davinci/include/mach/asp.h new file mode 100644 index 000000000000..e0abc437d796 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/include/mach/asp.h @@ -0,0 +1,25 @@ +/* + * - DaVinci Audio Serial Port support + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +#include + +/* Bases of register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* EDMA channels */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/trunk/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/trunk/arch/arm/mach-davinci/include/mach/board-dm6446evm.h new file mode 100644 index 000000000000..3216f21c1238 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/include/mach/board-dm6446evm.h @@ -0,0 +1,20 @@ +/* + * DaVinci DM6446 EVM board specific headers + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or ifndef. + */ + +#ifndef _MACH_DAVINCI_DM6446EVM_H +#define _MACH_DAVINCI_DM6446EVM_H + +#include + +int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); +int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); + +#endif diff --git a/trunk/arch/arm/mach-davinci/include/mach/clkdev.h b/trunk/arch/arm/mach-davinci/include/mach/clkdev.h new file mode 100644 index 000000000000..730c49d1ebd8 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/trunk/arch/arm/mach-davinci/include/mach/clock.h b/trunk/arch/arm/mach-davinci/include/mach/clock.h index 38bdd49bc181..a3b040219876 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/clock.h +++ b/trunk/arch/arm/mach-davinci/include/mach/clock.h @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff --git a/trunk/arch/arm/mach-davinci/include/mach/common.h b/trunk/arch/arm/mach-davinci/include/mach/common.h index 4b522e5c70ec..191770976250 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/common.h +++ b/trunk/arch/arm/mach-davinci/include/mach/common.h @@ -16,6 +16,12 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void davinci_map_common_io(void); + +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff --git a/trunk/arch/arm/mach-davinci/include/mach/cputype.h b/trunk/arch/arm/mach-davinci/include/mach/cputype.h new file mode 100644 index 000000000000..27cfb1b3a662 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/include/mach/cputype.h @@ -0,0 +1,49 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +extern unsigned int davinci_rev(void); + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_dm ##type(void) \ +{ \ + return (davinci_rev() == (id)) ? 1 : 0; \ +} + +IS_DAVINCI_CPU(644x, 0x6446) +IS_DAVINCI_CPU(646x, 0x6467) +IS_DAVINCI_CPU(355, 0x355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif diff --git a/trunk/arch/arm/mach-davinci/include/mach/dm644x.h b/trunk/arch/arm/mach-davinci/include/mach/dm644x.h new file mode 100644 index 000000000000..3dcb9f4e58b4 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/include/mach/dm644x.h @@ -0,0 +1,37 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x. + * + * Copyright (C) 2008 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H + +#include +#include + +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm644x_init(void); + +#endif /* __ASM_ARCH_DM644X_H */ diff --git a/trunk/arch/arm/mach-davinci/include/mach/edma.h b/trunk/arch/arm/mach-davinci/include/mach/edma.h new file mode 100644 index 000000000000..f6fc5396dafc --- /dev/null +++ b/trunk/arch/arm/mach-davinci/include/mach/edma.h @@ -0,0 +1,228 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* UNRELATED TO DMA */ +int davinci_alloc_iram(unsigned size); +void davinci_free_iram(unsigned addr, unsigned size); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif diff --git a/trunk/arch/arm/mach-davinci/include/mach/gpio.h b/trunk/arch/arm/mach-davinci/include/mach/gpio.h index b456f079f43f..efe3281364e6 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/gpio.h +++ b/trunk/arch/arm/mach-davinci/include/mach/gpio.h @@ -15,9 +15,11 @@ #include #include -#include + #include +#define DAVINCI_GPIO_BASE 0x01C67000 + /* * basic gpio routines * @@ -26,23 +28,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - if (gpio < 32) + if (gpio < 32 * 1) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) + else if (gpio < 32 * 2) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) + else if (gpio < 32 * 3) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else if (gpio < 32 * 4) + ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); else ptr = NULL; return ptr; diff --git a/trunk/arch/arm/mach-davinci/include/mach/hardware.h b/trunk/arch/arm/mach-davinci/include/mach/hardware.h index a2e8969afaca..48c77934d519 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/hardware.h +++ b/trunk/arch/arm/mach-davinci/include/mach/hardware.h @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in .h, + * and the chip/board init code should then explicitly include + * .h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/trunk/arch/arm/mach-davinci/include/mach/io.h b/trunk/arch/arm/mach-davinci/include/mach/io.h index a48795fd2417..2479785405af 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/io.h +++ b/trunk/arch/arm/mach-davinci/include/mach/io.h @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff --git a/trunk/arch/arm/mach-davinci/include/mach/irqs.h b/trunk/arch/arm/mach-davinci/include/mach/irqs.h index f4c5ca6da9f4..18066074c995 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/irqs.h +++ b/trunk/arch/arm/mach-davinci/include/mach/irqs.h @@ -96,10 +96,111 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/trunk/arch/arm/mach-davinci/include/mach/mux.h b/trunk/arch/arm/mach-davinci/include/mach/mux.h index c24b6782804d..bae22cb3e27b 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/mux.h +++ b/trunk/arch/arm/mach-davinci/include/mach/mux.h @@ -1,55 +1,183 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ + +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +/* System module registers */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +/* dm355 only */ +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern void davinci_mux_init(void); +extern int davinci_mux_register(const struct mux_config *pins, + unsigned long size); +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline void davinci_mux_init(void) {} +static inline int davinci_mux_register(const struct mux_config *pins, + unsigned long size) { return 0; } +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif /* __INC_MACH_MUX_H */ diff --git a/trunk/arch/arm/mach-davinci/include/mach/psc.h b/trunk/arch/arm/mach-davinci/include/mach/psc.h index 4977aa071e1e..55a90d419fac 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/psc.h +++ b/trunk/arch/arm/mach-davinci/include/mach/psc.h @@ -38,8 +38,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +45,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +70,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int id, + char enable); + #endif /* __ASM_ARCH_PSC_H */ diff --git a/trunk/arch/arm/mach-davinci/include/mach/serial.h b/trunk/arch/arm/mach-davinci/include/mach/serial.h index fb8cb229bfd2..632847d74a1c 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/serial.h +++ b/trunk/arch/arm/mach-davinci/include/mach/serial.h @@ -13,8 +13,23 @@ #include -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern void davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/trunk/arch/arm/mach-davinci/io.c b/trunk/arch/arm/mach-davinci/io.c index 299515f70b8b..a548abb513e2 100644 --- a/trunk/arch/arm/mach-davinci/io.c +++ b/trunk/arch/arm/mach-davinci/io.c @@ -51,7 +51,26 @@ void __init davinci_map_common_io(void) davinci_check_revision(); } -void __init davinci_init_common_hw(void) +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(davinci_ioremap); + +void davinci_iounmap(volatile void __iomem *addr) { - davinci_clk_init(); + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff --git a/trunk/arch/arm/mach-davinci/irq.c b/trunk/arch/arm/mach-davinci/irq.c index 38021af8359a..5a324c90e291 100644 --- a/trunk/arch/arm/mach-davinci/irq.c +++ b/trunk/arch/arm/mach-davinci/irq.c @@ -25,6 +25,7 @@ #include #include +#include #include #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -40,14 +41,18 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +const u8 *davinci_def_priorities; + +#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(INTC_BASE + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, INTC_BASE + offset); } /* Disable interrupt */ @@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { +static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, [IRQ_VDINT2] = 6, @@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_EMUINT] = 7, }; +static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + + if (cpu_is_davinci_dm644x()) + davinci_def_priorities = dm644x_default_priorities; + else if (cpu_is_davinci_dm646x()) + davinci_def_priorities = dm646x_default_priorities; + else if (cpu_is_davinci_dm355()) + davinci_def_priorities = dm355_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -209,8 +351,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } diff --git a/trunk/arch/arm/mach-davinci/mux.c b/trunk/arch/arm/mach-davinci/mux.c index 8ff9d8aca60b..bbba0b247a44 100644 --- a/trunk/arch/arm/mach-davinci/mux.c +++ b/trunk/arch/arm/mach-davinci/mux.c @@ -1,41 +1,103 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include +#include #include #include - #include -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +static const struct mux_config *mux_table; +static unsigned long pin_table_sz; + +int __init davinci_mux_register(const struct mux_config *pins, + unsigned long size) +{ + mux_table = pins; + pin_table_sz = size; -static DEFINE_SPINLOCK(mux_lock); + return 0; +} -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) { - u32 pinmux, muxreg = PINMUX0; + static DEFINE_SPINLOCK(mux_spin_lock); + void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; + + if (!mux_table) + BUG(); + + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; + } + + cfg = &mux_table[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff --git a/trunk/arch/arm/mach-davinci/mux.h b/trunk/arch/arm/mach-davinci/mux.h new file mode 100644 index 000000000000..adc869413371 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/mux.h @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ diff --git a/trunk/arch/arm/mach-davinci/psc.c b/trunk/arch/arm/mach-davinci/psc.c index 58754f066d5b..84171abf5f7b 100644 --- a/trunk/arch/arm/mach-davinci/psc.c +++ b/trunk/arch/arm/mach-davinci/psc.c @@ -23,10 +23,13 @@ #include #include +#include #include #include #include +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -36,102 +39,61 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 +#define MDSTAT_STATE_MASK 0x1f -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; - } + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } diff --git a/trunk/arch/arm/mach-davinci/serial.c b/trunk/arch/arm/mach-davinci/serial.c index 3010f9971255..695075796522 100644 --- a/trunk/arch/arm/mach-davinci/serial.c +++ b/trunk/arch/arm/mach-davinci/serial.c @@ -32,32 +32,47 @@ #include #include #include +#include +#include "clock.h" -#define UART_DAVINCI_PWREMU 0x0c - -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, + .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = 27000000, }, { .flags = 0 @@ -74,22 +89,68 @@ static struct platform_device serial_device = { static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); +} + +void __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i; + char name[16]; + struct clk *uart_clk; + struct device *dev = &serial_device.dev; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->flags = 0; + continue; + } + + if (cpu_is_davinci_dm646x()) + p->iotype = UPIO_MEM32; + + if (cpu_is_davinci_dm355()) { + if (i == 2) { + p->mapbase = (unsigned long)DM355_UART2_BASE; + p->irq = IRQ_DM355_UARTINT2; + } + } + + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } } static int __init davinci_init(void) { - davinci_serial_reset(&serial_platform_data[0]); return platform_device_register(&serial_device); } diff --git a/trunk/arch/arm/mach-davinci/time.c b/trunk/arch/arm/mach-davinci/time.c index 6c227d4ba998..494e01bff5c3 100644 --- a/trunk/arch/arm/mach-davinci/time.c +++ b/trunk/arch/arm/mach-davinci/time.c @@ -16,6 +16,9 @@ #include #include #include +#include +#include +#include #include #include @@ -24,8 +27,11 @@ #include #include #include +#include +#include "clock.h" static struct clock_event_device clockevent_davinci; +static unsigned int davinci_clock_tick_rate; #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) @@ -99,9 +105,9 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; @@ -114,15 +120,15 @@ static struct timer_s timers[]; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); + u32 tcr = __raw_readl(t->base + TCR); /* disable timer */ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); /* Set enable mode */ if (t->opts & TIMER_OPTS_ONESHOT) { @@ -131,13 +137,13 @@ static int timer32_config(struct timer_s *t) tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; } - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,51 +182,54 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = IO_ADDRESS(phys_bases[i]); /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + u32 phys_base; if (t->name) { t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? + phys_base = (IS_TIMER1(t->id) ? DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); + t->base = IO_ADDRESS(phys_base); if (IS_TIMER_BOT(t->id)) { t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; + t->tim_off = TIM12; + t->prd_off = PRD12; } else { t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; + t->tim_off = TIM34; + t->prd_off = PRD34; } /* Register interrupt */ @@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); + t->period = davinci_clock_tick_rate / (HZ); t->opts = TIMER_OPTS_PERIODIC; timer32_config(t); break; @@ -301,21 +310,29 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { + struct clk *timer_clk; + static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); @@ -333,42 +350,52 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; + u32 tgcr, wdtcr; + void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct device dev; + struct clk *wd_clk; + char *name = "watchdog"; + + dev_set_name(&dev, name); + wd_clk = clk_get(&dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff --git a/trunk/arch/arm/mach-davinci/usb.c b/trunk/arch/arm/mach-davinci/usb.c index 2429b79f6da2..abedb6337182 100644 --- a/trunk/arch/arm/mach-davinci/usb.c +++ b/trunk/arch/arm/mach-davinci/usb.c @@ -14,6 +14,8 @@ #include #include +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, diff --git a/trunk/arch/arm/mach-ep93xx/clock.c b/trunk/arch/arm/mach-ep93xx/clock.c index e8ebeaea6c48..b2eede5531c8 100644 --- a/trunk/arch/arm/mach-ep93xx/clock.c +++ b/trunk/arch/arm/mach-ep93xx/clock.c @@ -21,15 +21,50 @@ #include #include + +/* + * The EP93xx has two external crystal oscillators. To generate the + * required high-frequency clocks, the processor uses two phase-locked- + * loops (PLLs) to multiply the incoming external clock signal to much + * higher frequencies that are then divided down by programmable dividers + * to produce the needed clocks. The PLLs operate independently of one + * another. + */ +#define EP93XX_EXT_CLK_RATE 14745600 +#define EP93XX_EXT_RTC_RATE 32768 + + struct clk { unsigned long rate; int users; + int sw_locked; u32 enable_reg; u32 enable_mask; + + unsigned long (*get_rate)(struct clk *clk); }; -static struct clk clk_uart = { - .rate = 14745600, + +static unsigned long get_uart_rate(struct clk *clk); + + +static struct clk clk_uart1 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart2 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart3 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN, + .get_rate = get_uart_rate, }; static struct clk clk_pll1; static struct clk clk_f; @@ -95,9 +130,9 @@ static struct clk clk_m2m1 = { { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { - INIT_CK("apb:uart1", NULL, &clk_uart), - INIT_CK("apb:uart2", NULL, &clk_uart), - INIT_CK("apb:uart3", NULL, &clk_uart), + INIT_CK("apb:uart1", NULL, &clk_uart1), + INIT_CK("apb:uart2", NULL, &clk_uart2), + INIT_CK("apb:uart3", NULL, &clk_uart3), INIT_CK(NULL, "pll1", &clk_pll1), INIT_CK(NULL, "fclk", &clk_f), INIT_CK(NULL, "hclk", &clk_h), @@ -125,6 +160,8 @@ int clk_enable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value | clk->enable_mask, clk->enable_reg); } @@ -138,13 +175,29 @@ void clk_disable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value & ~clk->enable_mask, clk->enable_reg); } } EXPORT_SYMBOL(clk_disable); +static unsigned long get_uart_rate(struct clk *clk) +{ + u32 value; + + value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL); + if (value & EP93XX_SYSCON_CLOCK_UARTBAUD) + return EP93XX_EXT_CLK_RATE; + else + return EP93XX_EXT_CLK_RATE / 2; +} + unsigned long clk_get_rate(struct clk *clk) { + if (clk->get_rate) + return clk->get_rate(clk); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word) unsigned long long rate; int i; - rate = 14745600; + rate = EP93XX_EXT_CLK_RATE; rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ @@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ - clk_pll1.rate = 14745600; + clk_pll1.rate = EP93XX_EXT_CLK_RATE; } else { clk_pll1.rate = calc_pll_rate(value); } @@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ - clk_pll2.rate = 14745600; + clk_pll2.rate = EP93XX_EXT_CLK_RATE; } else if (value & 0x00040000) { /* PLL2 enabled? */ clk_pll2.rate = calc_pll_rate(value); } else { diff --git a/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index f66be12b856e..1732de7629a5 100644 --- a/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -159,7 +159,10 @@ #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 +#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23) +#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) diff --git a/trunk/arch/arm/mach-gemini/include/mach/hardware.h b/trunk/arch/arm/mach-gemini/include/mach/hardware.h index de6752674c05..213a4fcfeb1c 100644 --- a/trunk/arch/arm/mach-gemini/include/mach/hardware.h +++ b/trunk/arch/arm/mach-gemini/include/mach/hardware.h @@ -15,10 +15,9 @@ /* * Memory Map definitions */ -/* FIXME: Does it really swap SRAM like this? */ #ifdef CONFIG_GEMINI_MEM_SWAP # define GEMINI_DRAM_BASE 0x00000000 -# define GEMINI_SRAM_BASE 0x20000000 +# define GEMINI_SRAM_BASE 0x70000000 #else # define GEMINI_SRAM_BASE 0x00000000 # define GEMINI_DRAM_BASE 0x10000000 diff --git a/trunk/arch/arm/mach-imx/include/mach/gpio.h b/trunk/arch/arm/mach-imx/include/mach/gpio.h index 502d5aa2c093..6c2942f82922 100644 --- a/trunk/arch/arm/mach-imx/include/mach/gpio.h +++ b/trunk/arch/arm/mach-imx/include/mach/gpio.h @@ -1,6 +1,7 @@ #ifndef _IMX_GPIO_H #include +#include #include #define IMX_GPIO_ALLOC_MODE_NORMAL 0 diff --git a/trunk/arch/arm/mach-integrator/core.c b/trunk/arch/arm/mach-integrator/core.c index 6f8872913073..a0f60e55da6a 100644 --- a/trunk/arch/arm/mach-integrator/core.c +++ b/trunk/arch/arm/mach-integrator/core.c @@ -121,7 +121,7 @@ static struct clk uartclk = { .rate = 14745600, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, diff --git a/trunk/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/trunk/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 252310234903..7bb8e778e4b6 100644 --- a/trunk/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/trunk/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -714,7 +714,7 @@ static int __init npe_init_module(void) } if (!found) - return -ENOSYS; + return -ENODEV; return 0; } diff --git a/trunk/arch/arm/mach-kirkwood/common.c b/trunk/arch/arm/mach-kirkwood/common.c index 16dc9ea08393..be1ca28fed3f 100644 --- a/trunk/arch/arm/mach-kirkwood/common.c +++ b/trunk/arch/arm/mach-kirkwood/common.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -143,6 +144,9 @@ static struct platform_device kirkwood_ge00 = { .id = 0, .num_resources = 1, .resource = kirkwood_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -201,6 +205,9 @@ static struct platform_device kirkwood_ge01 = { .id = 1, .num_resources = 1, .resource = kirkwood_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) @@ -385,12 +392,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { static struct resource kirkwood_i2c_resources[] = { { - .name = "i2c", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c", .start = IRQ_KIRKWOOD_TWSI, .end = IRQ_KIRKWOOD_TWSI, .flags = IORESOURCE_IRQ, diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/trunk/arch/arm/mach-kirkwood/include/mach/bridge-regs.h new file mode 100644 index 000000000000..4f7029f521cc --- /dev/null +++ b/trunk/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-kirkwood/include/mach/bridge-regs.h + * + * Mbus-L to Mbus Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_RESET 0x00000002 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_WRITETHROUGH 0x00000010 + +#endif diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/trunk/arch/arm/mach-kirkwood/include/mach/debug-macro.S index c0cc5b5c82ac..a4a55c199d77 100644 --- a/trunk/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/trunk/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -6,7 +6,7 @@ * published by the Free Software Foundation. */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/trunk/arch/arm/mach-kirkwood/include/mach/entry-macro.S index 83e0cba77b36..8939d36f893c 100644 --- a/trunk/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ b/trunk/arch/arm/mach-kirkwood/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/trunk/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 38c986853590..b3e13958821d 100644 --- a/trunk/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/trunk/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -43,44 +43,6 @@ #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M -/* - * MBUS bridge registers. - */ -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 - /* * Register Map */ @@ -99,6 +61,8 @@ #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -119,5 +83,18 @@ #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) +/* + * Supported devices and revisions. + */ +#define MV88F6281_DEV_ID 0x6281 +#define MV88F6281_REV_Z0 0 +#define MV88F6281_REV_A0 2 + +#define MV88F6192_DEV_ID 0x6192 +#define MV88F6192_REV_Z0 0 +#define MV88F6192_REV_A0 2 + +#define MV88F6180_DEV_ID 0x6180 +#define MV88F6180_REV_A0 2 #endif diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/system.h b/trunk/arch/arm/mach-kirkwood/include/mach/system.h index 23a1914c1da8..7568e95d279b 100644 --- a/trunk/arch/arm/mach-kirkwood/include/mach/system.h +++ b/trunk/arch/arm/mach-kirkwood/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/trunk/arch/arm/mach-kirkwood/irq.c b/trunk/arch/arm/mach-kirkwood/irq.c index 06083b23bb44..28020abf49e1 100644 --- a/trunk/arch/arm/mach-kirkwood/irq.c +++ b/trunk/arch/arm/mach-kirkwood/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include "common.h" diff --git a/trunk/arch/arm/mach-kirkwood/ts219-setup.c b/trunk/arch/arm/mach-kirkwood/ts219-setup.c index dda5743cf3e0..01aa213c0a6f 100644 --- a/trunk/arch/arm/mach-kirkwood/ts219-setup.c +++ b/trunk/arch/arm/mach-kirkwood/ts219-setup.c @@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, MPP8_TW_SDA, MPP9_TW_SCK, MPP10_UART0_TXD, @@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_SATA1_PRESENTn, - MPP23_SATA0_PRESENTn, 0 }; diff --git a/trunk/arch/arm/mach-l7200/include/mach/sys-clock.h b/trunk/arch/arm/mach-l7200/include/mach/sys-clock.h index 2d7722be60ea..e9729a35751d 100644 --- a/trunk/arch/arm/mach-l7200/include/mach/sys-clock.h +++ b/trunk/arch/arm/mach-l7200/include/mach/sys-clock.h @@ -18,7 +18,7 @@ /* IO_START and IO_BASE are defined in hardware.h */ -#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */ +#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */ #define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ /* Define the interface to the SYS_CLOCK */ diff --git a/trunk/arch/arm/mach-loki/addr-map.c b/trunk/arch/arm/mach-loki/addr-map.c index 0332d8f5c18c..b9537c97beba 100644 --- a/trunk/arch/arm/mach-loki/addr-map.c +++ b/trunk/arch/arm/mach-loki/addr-map.c @@ -38,6 +38,7 @@ /* * CPU Address Decode Windows registers */ +#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/trunk/arch/arm/mach-loki/common.c b/trunk/arch/arm/mach-loki/common.c index c0d2d9d12e74..818f19d7ab1f 100644 --- a/trunk/arch/arm/mach-loki/common.c +++ b/trunk/arch/arm/mach-loki/common.c @@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = { .id = 0, .num_resources = 1, .resource = loki_ge0_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) @@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = { .id = 1, .num_resources = 1, .resource = loki_ge1_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/trunk/arch/arm/mach-loki/include/mach/bridge-regs.h b/trunk/arch/arm/mach-loki/include/mach/bridge-regs.h new file mode 100644 index 000000000000..a3fabf70044f --- /dev/null +++ b/trunk/arch/arm/mach-loki/include/mach/bridge-regs.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-loki/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) + +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR 0x0004 + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_OFF 0x0000 +#define IRQ_MASK_OFF 0x0004 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/trunk/arch/arm/mach-loki/include/mach/entry-macro.S b/trunk/arch/arm/mach-loki/include/mach/entry-macro.S index 332af38ec13c..bc917ed3a62d 100644 --- a/trunk/arch/arm/mach-loki/include/mach/entry-macro.S +++ b/trunk/arch/arm/mach-loki/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/trunk/arch/arm/mach-loki/include/mach/loki.h b/trunk/arch/arm/mach-loki/include/mach/loki.h index c00af6ba5578..bfca7c265f43 100644 --- a/trunk/arch/arm/mach-loki/include/mach/loki.h +++ b/trunk/arch/arm/mach-loki/include/mach/loki.h @@ -58,20 +58,6 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR 0x0004 -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) #define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) diff --git a/trunk/arch/arm/mach-loki/include/mach/system.h b/trunk/arch/arm/mach-loki/include/mach/system.h index c1de36fe9b37..71895199a534 100644 --- a/trunk/arch/arm/mach-loki/include/mach/system.h +++ b/trunk/arch/arm/mach-loki/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/trunk/arch/arm/mach-loki/irq.c b/trunk/arch/arm/mach-loki/irq.c index e1f97338d5b7..76b211bfcca2 100644 --- a/trunk/arch/arm/mach-loki/irq.c +++ b/trunk/arch/arm/mach-loki/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include "common.h" diff --git a/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index d0bdb6e3682b..2e914649b9e4 100644 --- a/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x1 << 13) +#define MFP_DRIVE_MEDIUM (0x2 << 13) +#define MFP_DRIVE_FAST (0x3 << 13) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index 48a1cbc7c56b..d97de36c50ad 100644 --- a/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/trunk/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + /* UART2 */ #define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6) #define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6) diff --git a/trunk/arch/arm/mach-mmp/include/mach/mfp.h b/trunk/arch/arm/mach-mmp/include/mach/mfp.h index 277ea4cd0f9f..62e510e80a58 100644 --- a/trunk/arch/arm/mach-mmp/include/mach/mfp.h +++ b/trunk/arch/arm/mach-mmp/include/mach/mfp.h @@ -12,16 +12,13 @@ * possible, we make the following compromise: * * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT) - * 2. DRIVE strength definitions redefined to include the reserved bit10 + * 2. DRIVE strength definitions redefined to include the reserved bit + * - the reserved bit differs between pxa168 and pxa910, and the + * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h * 3. Override MFP_CFG() and MFP_CFG_DRV() * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X() */ -#define MFP_DRIVE_VERY_SLOW (0x0 << 13) -#define MFP_DRIVE_SLOW (0x2 << 13) -#define MFP_DRIVE_MEDIUM (0x4 << 13) -#define MFP_DRIVE_FAST (0x8 << 13) - #undef MFP_CFG #undef MFP_CFG_DRV #undef MFP_CFG_LPM diff --git a/trunk/arch/arm/mach-mmp/time.c b/trunk/arch/arm/mach-mmp/time.c index b03a6eda7419..a8400bb891e7 100644 --- a/trunk/arch/arm/mach-mmp/time.c +++ b/trunk/arch/arm/mach-mmp/time.c @@ -136,7 +136,7 @@ static struct clock_event_device ckevt = { .set_mode = timer_set_mode, }; -static cycle_t clksrc_read(void) +static cycle_t clksrc_read(struct clocksource *cs) { return timer_read(); } diff --git a/trunk/arch/arm/mach-mv78xx0/common.c b/trunk/arch/arm/mach-mv78xx0/common.c index a575daaa62d1..1b22e4af8791 100644 --- a/trunk/arch/arm/mach-mv78xx0/common.c +++ b/trunk/arch/arm/mach-mv78xx0/common.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -320,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = { .id = 0, .num_resources = 1, .resource = mv78xx0_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -374,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = { .id = 1, .num_resources = 1, .resource = mv78xx0_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) @@ -428,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = { .id = 2, .num_resources = 1, .resource = mv78xx0_ge10_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) @@ -495,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = { .id = 3, .num_resources = 1, .resource = mv78xx0_ge11_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) @@ -531,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { static struct resource mv78xx0_i2c_0_resources[] = { { - .name = "i2c 0 base", .start = I2C_0_PHYS_BASE, .end = I2C_0_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 0 irq", .start = IRQ_MV78XX0_I2C_0, .end = IRQ_MV78XX0_I2C_0, .flags = IORESOURCE_IRQ, @@ -566,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { static struct resource mv78xx0_i2c_1_resources[] = { { - .name = "i2c 1 base", .start = I2C_1_PHYS_BASE, .end = I2C_1_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 1 irq", .start = IRQ_MV78XX0_I2C_1, .end = IRQ_MV78XX0_I2C_1, .flags = IORESOURCE_IRQ, diff --git a/trunk/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/trunk/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h new file mode 100644 index 000000000000..2d14c4fe294d --- /dev/null +++ b/trunk/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define L2_WRITETHROUGH 0x00020000 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_ERR_OFF 0x0000 +#define IRQ_CAUSE_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0008 +#define IRQ_MASK_ERR_OFF 0x000c +#define IRQ_MASK_LOW_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/trunk/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/trunk/arch/arm/mach-mv78xx0/include/mach/entry-macro.S index fbfb2693ce6c..66ae2d29e773 100644 --- a/trunk/arch/arm/mach-mv78xx0/include/mach/entry-macro.S +++ b/trunk/arch/arm/mach-mv78xx0/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/trunk/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/trunk/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 582cffc733ad..d715b92b0908 100644 --- a/trunk/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/trunk/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -59,37 +59,6 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_ERR_OFF 0x0000 -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_ERR_OFF 0x000c -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -/* - * Supported devices and revisions. - */ -#define MV78X00_Z0_DEV_ID 0x6381 -#define MV78X00_REV_Z0 1 - -#define MV78100_DEV_ID 0x7810 -#define MV78100_REV_A0 1 - -#define MV78200_DEV_ID 0x7820 -#define MV78200_REV_A0 1 /* * Register Map @@ -135,5 +104,16 @@ #define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) +/* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 #endif diff --git a/trunk/arch/arm/mach-mv78xx0/include/mach/system.h b/trunk/arch/arm/mach-mv78xx0/include/mach/system.h index 1d6350b22d0b..66e7ce4e90bd 100644 --- a/trunk/arch/arm/mach-mv78xx0/include/mach/system.h +++ b/trunk/arch/arm/mach-mv78xx0/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/trunk/arch/arm/mach-mv78xx0/irq.c b/trunk/arch/arm/mach-mv78xx0/irq.c index 30b7e4bcdbc7..f289b0ea7dcf 100644 --- a/trunk/arch/arm/mach-mv78xx0/irq.c +++ b/trunk/arch/arm/mach-mv78xx0/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/trunk/arch/arm/mach-mx2/clock_imx21.c b/trunk/arch/arm/mach-mx2/clock_imx21.c index 999d013e06e3..e4b08ca804ea 100644 --- a/trunk/arch/arm/mach-mx2/clock_imx21.c +++ b/trunk/arch/arm/mach-mx2/clock_imx21.c @@ -890,7 +890,7 @@ static struct clk clko_clk = { .con_id = n, \ .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { /* It's unlikely that any driver wants one of them directly: _REGISTER_CLOCK(NULL, "ckih", ckih_clk) _REGISTER_CLOCK(NULL, "ckil", ckil_clk) diff --git a/trunk/arch/arm/mach-mx2/clock_imx27.c b/trunk/arch/arm/mach-mx2/clock_imx27.c index 3f7280c490f0..2c971442f3f2 100644 --- a/trunk/arch/arm/mach-mx2/clock_imx27.c +++ b/trunk/arch/arm/mach-mx2/clock_imx27.c @@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) diff --git a/trunk/arch/arm/mach-mx3/clock-imx35.c b/trunk/arch/arm/mach-mx3/clock-imx35.c index 53a112d4e04a..3c1e06f56dd6 100644 --- a/trunk/arch/arm/mach-mx3/clock-imx35.c +++ b/trunk/arch/arm/mach-mx3/clock-imx35.c @@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "asrc", asrc_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) diff --git a/trunk/arch/arm/mach-mx3/clock.c b/trunk/arch/arm/mach-mx3/clock.c index 9957a11533a4..a68fcf981edf 100644 --- a/trunk/arch/arm/mach-mx3/clock.c +++ b/trunk/arch/arm/mach-mx3/clock.c @@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "emi", emi_clk) _REGISTER_CLOCK(NULL, "cspi", cspi1_clk) _REGISTER_CLOCK(NULL, "cspi", cspi2_clk) diff --git a/trunk/arch/arm/mach-omap1/board-h2-mmc.c b/trunk/arch/arm/mach-omap1/board-h2-mmc.c index 44d4a966bed9..46098f546824 100644 --- a/trunk/arch/arm/mach-omap1/board-h2-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-h2-mmc.c @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev) return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev) static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, diff --git a/trunk/arch/arm/mach-omap1/board-h3-mmc.c b/trunk/arch/arm/mach-omap1/board-h3-mmc.c index 0d8a3c195e2e..5e8877ce35e0 100644 --- a/trunk/arch/arm/mach-omap1/board-h3-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-h3-mmc.c @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff --git a/trunk/arch/arm/mach-omap1/board-h3.c b/trunk/arch/arm/mach-omap1/board-h3.c index 4695965114c4..f597968733b4 100644 --- a/trunk/arch/arm/mach-omap1/board-h3.c +++ b/trunk/arch/arm/mach-omap1/board-h3.c @@ -39,12 +39,10 @@ #include #include -#include #include #include #include #include -#include #include #include #include @@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = { .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = { &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff --git a/trunk/arch/arm/mach-omap1/board-nokia770.c b/trunk/arch/arm/mach-omap1/board-nokia770.c index 7bc7a3cb9c51..d1ed1365319e 100644 --- a/trunk/arch/arm/mach-omap1/board-nokia770.c +++ b/trunk/arch/arm/mach-omap1/board-nokia770.c @@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } diff --git a/trunk/arch/arm/mach-omap1/mcbsp.c b/trunk/arch/arm/mach-omap1/mcbsp.c index d040c3f1027f..a2d7814896be 100644 --- a/trunk/arch/arm/mach-omap1/mcbsp.c +++ b/trunk/arch/arm/mach-omap1/mcbsp.c @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id) */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); diff --git a/trunk/arch/arm/mach-omap2/board-h4.c b/trunk/arch/arm/mach-omap2/board-h4.c index a0267a9ab466..e7d017cdc438 100644 --- a/trunk/arch/arm/mach-omap2/board-h4.c +++ b/trunk/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include #include -#include #include #include -#include #include #include #include @@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff --git a/trunk/arch/arm/mach-omap2/board-omap3beagle.c b/trunk/arch/arm/mach-omap2/board-omap3beagle.c index 744740ae1b9c..3a7a29d1f9a7 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3beagle.c +++ b/trunk/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "mmc-twl4030.h" @@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } diff --git a/trunk/arch/arm/mach-omap2/board-rx51.c b/trunk/arch/arm/mach-omap2/board-rx51.c index 3a0daac6c839..374ff63c3eb2 100644 --- a/trunk/arch/arm/mach-omap2/board-rx51.c +++ b/trunk/arch/arm/mach-omap2/board-rx51.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-omap2/clock24xx.c b/trunk/arch/arm/mach-omap2/clock24xx.c index 1e839c5a28c5..e4cef333e291 100644 --- a/trunk/arch/arm/mach-omap2/clock24xx.c +++ b/trunk/arch/arm/mach-omap2/clock24xx.c @@ -60,12 +60,13 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), @@ -102,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X), + CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), @@ -205,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), @@ -711,7 +712,7 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -720,20 +721,14 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); diff --git a/trunk/arch/arm/mach-omap2/clock24xx.h b/trunk/arch/arm/mach-omap2/clock24xx.h index 33c3e5b14323..88c5acb40fcf 100644 --- a/trunk/arch/arm/mach-omap2/clock24xx.h +++ b/trunk/arch/arm/mach-omap2/clock24xx.h @@ -625,6 +625,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff --git a/trunk/arch/arm/mach-omap2/clock34xx.c b/trunk/arch/arm/mach-omap2/clock34xx.c index 0a14dca31e30..ba05aa42bd8e 100644 --- a/trunk/arch/arm/mach-omap2/clock34xx.c +++ b/trunk/arch/arm/mach-omap2/clock34xx.c @@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), @@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X), - CLK(NULL, "dss_ick", &dss_ick, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapfb", "ick", &dss_ick, CK_343X), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), diff --git a/trunk/arch/arm/mach-omap2/clock34xx.h b/trunk/arch/arm/mach-omap2/clock34xx.h index 70ec10deb654..017a30e9aa1d 100644 --- a/trunk/arch/arm/mach-omap2/clock34xx.h +++ b/trunk/arch/arm/mach-omap2/clock34xx.h @@ -2052,7 +2052,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2063,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2074,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), @@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = { static struct clk gpio1_dbck = { .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, @@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = { static struct clk gpio6_dbck = { .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, @@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = { static struct clk gpio5_dbck = { .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, @@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = { static struct clk gpio4_dbck = { .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, @@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = { static struct clk gpio3_dbck = { .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, @@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = { static struct clk gpio2_dbck = { .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, @@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff --git a/trunk/arch/arm/mach-omap2/devices.c b/trunk/arch/arm/mach-omap2/devices.c index d6b4b2f8722f..894cc355818a 100644 --- a/trunk/arch/arm/mach-omap2/devices.c +++ b/trunk/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -355,10 +354,12 @@ static void omap_init_mcspi(void) platform_device_register(&omap2_mcspi1); platform_device_register(&omap2_mcspi2); #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) - platform_device_register(&omap2_mcspi3); + if (cpu_is_omap2430() || cpu_is_omap343x()) + platform_device_register(&omap2_mcspi3); #endif #ifdef CONFIG_ARCH_OMAP3 - platform_device_register(&omap2_mcspi4); + if (cpu_is_omap343x()) + platform_device_register(&omap2_mcspi4); #endif } @@ -366,38 +367,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff --git a/trunk/arch/arm/mach-omap2/irq.c b/trunk/arch/arm/mach-omap2/irq.c index 9ba20d985dda..998c5c45587e 100644 --- a/trunk/arch/arm/mach-omap2/irq.c +++ b/trunk/arch/arm/mach-omap2/irq.c @@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq) u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); diff --git a/trunk/arch/arm/mach-omap2/prm-regbits-34xx.h b/trunk/arch/arm/mach-omap2/prm-regbits-34xx.h index c6a7940f4287..9fd03a2ec95c 100644 --- a/trunk/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/trunk/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -409,7 +409,7 @@ /* PM_PREPWSTST_CAM specific bits */ /* PM_PWSTCTRL_USBHOST specific bits */ -#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4) +#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4 /* RM_RSTST_PER specific bits */ diff --git a/trunk/arch/arm/mach-omap2/timer-gp.c b/trunk/arch/arm/mach-omap2/timer-gp.c index 1cb2c0909c2b..f36aba12090e 100644 --- a/trunk/arch/arm/mach-omap2/timer-gp.c +++ b/trunk/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. * Copyright (C) 2007 MontaVista Software, Inc. @@ -36,8 +38,13 @@ #include #include +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; + + inited = 1; - gptimer = omap_dm_timer_request_specific(1); + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); @@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void) clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource diff --git a/trunk/arch/arm/mach-omap2/usb-tusb6010.c b/trunk/arch/arm/mach-omap2/usb-tusb6010.c index 15e509013def..8622c24cd270 100644 --- a/trunk/arch/arm/mach-omap2/usb-tusb6010.c +++ b/trunk/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || fclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; diff --git a/trunk/arch/arm/mach-orion5x/addr-map.c b/trunk/arch/arm/mach-orion5x/addr-map.c index 719957e05d9e..c14d12137276 100644 --- a/trunk/arch/arm/mach-orion5x/addr-map.c +++ b/trunk/arch/arm/mach-orion5x/addr-map.c @@ -57,12 +57,14 @@ /* * Helpers to get DDR bank info */ +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) #define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) /* * CPU Address Decode Windows registers */ +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/trunk/arch/arm/mach-orion5x/common.c b/trunk/arch/arm/mach-orion5x/common.c index 6af99ddabdfb..b1c7778d9f96 100644 --- a/trunk/arch/arm/mach-orion5x/common.c +++ b/trunk/arch/arm/mach-orion5x/common.c @@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = { .id = 0, .num_resources = 1, .resource = orion5x_eth_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) @@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { static struct resource orion5x_i2c_resources[] = { { - .name = "i2c base", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c irq", .start = IRQ_ORION5X_I2C, .end = IRQ_ORION5X_I2C, .flags = IORESOURCE_IRQ, diff --git a/trunk/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/trunk/arch/arm/mach-orion5x/include/mach/bridge-regs.h new file mode 100644 index 000000000000..be896e59d3e7 --- /dev/null +++ b/trunk/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-orion5x/include/mach/bridge-regs.h + * + * Orion CPU Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) + +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) + +#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET 0x0002 + +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) + +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) + +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define WDT_INT_REQ 0x0008 + +#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) + +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) + +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#endif diff --git a/trunk/arch/arm/mach-orion5x/include/mach/entry-macro.S b/trunk/arch/arm/mach-orion5x/include/mach/entry-macro.S index 4351937035cd..d658992e5401 100644 --- a/trunk/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ b/trunk/arch/arm/mach-orion5x/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/trunk/arch/arm/mach-orion5x/include/mach/orion5x.h b/trunk/arch/arm/mach-orion5x/include/mach/orion5x.h index 67bda31406dd..377a773ae53f 100644 --- a/trunk/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/trunk/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -60,31 +60,11 @@ #define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 #define ORION5X_PCI_MEM_SIZE SZ_128M -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D0 4 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 -/* Orion-1-90 (88F6183) */ -#define MV88F6183_DEV_ID 0x6183 -#define MV88F6183_REV_B0 3 - /******************************************************************************* * Orion Registers Map ******************************************************************************/ + #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) @@ -97,34 +77,25 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) -#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) #define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) #define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) -#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) #define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) #define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) -#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x)) #define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) #define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) -#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) -#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) -#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) /******************************************************************************* * Device Bus Registers @@ -142,23 +113,24 @@ #define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) #define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION5X_BRIDGE_REG(0x100) -#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) -#define WDT_RESET 0x0002 -#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) -#define WDT_INT_REQ 0x0008 -#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) - +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +#define MV88F5181L_REV_A0 8 +#define MV88F5181L_REV_A1 9 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D0 4 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 +/* Orion-1-90 (88F6183) */ +#define MV88F6183_DEV_ID 0x6183 +#define MV88F6183_REV_B0 3 #endif diff --git a/trunk/arch/arm/mach-orion5x/include/mach/system.h b/trunk/arch/arm/mach-orion5x/include/mach/system.h index 9b8db1dcfa83..e912490fff23 100644 --- a/trunk/arch/arm/mach-orion5x/include/mach/system.h +++ b/trunk/arch/arm/mach-orion5x/include/mach/system.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/trunk/arch/arm/mach-orion5x/irq.c b/trunk/arch/arm/mach-orion5x/irq.c index e03f7b45cb0d..d7512b925a85 100644 --- a/trunk/arch/arm/mach-orion5x/irq.c +++ b/trunk/arch/arm/mach-orion5x/irq.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/trunk/arch/arm/mach-orion5x/mss2-setup.c b/trunk/arch/arm/mach-orion5x/mss2-setup.c index 68acca98e638..41e6d5033d54 100644 --- a/trunk/arch/arm/mach-orion5x/mss2-setup.c +++ b/trunk/arch/arm/mach-orion5x/mss2-setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "common.h" #include "mpp.h" diff --git a/trunk/arch/arm/mach-orion5x/pci.c b/trunk/arch/arm/mach-orion5x/pci.c index d0a785a3b880..36dc5413cc97 100644 --- a/trunk/arch/arm/mach-orion5x/pci.c +++ b/trunk/arch/arm/mach-orion5x/pci.c @@ -196,6 +196,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) diff --git a/trunk/arch/arm/mach-pxa/Kconfig b/trunk/arch/arm/mach-pxa/Kconfig index 3e66d9099eab..17d3fbd368a3 100644 --- a/trunk/arch/arm/mach-pxa/Kconfig +++ b/trunk/arch/arm/mach-pxa/Kconfig @@ -289,12 +289,12 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" diff --git a/trunk/arch/arm/mach-pxa/corgi.c b/trunk/arch/arm/mach-pxa/corgi.c index cdf21dd135b4..930e364ccde9 100644 --- a/trunk/arch/arm/mach-pxa/corgi.c +++ b/trunk/arch/arm/mach-pxa/corgi.c @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff --git a/trunk/arch/arm/mach-pxa/devices.c b/trunk/arch/arm/mach-pxa/devices.c index d245e59c51b1..29970f703f3c 100644 --- a/trunk/arch/arm/mach-pxa/devices.c +++ b/trunk/arch/arm/mach-pxa/devices.c @@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info) } -static struct pxa2xx_udc_mach_info pxa_udc_info; +static struct pxa2xx_udc_mach_info pxa_udc_info = { + .gpio_pullup = -1, + .gpio_vbus = -1, +}; void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) { diff --git a/trunk/arch/arm/mach-pxa/ezx.c b/trunk/arch/arm/mach-pxa/ezx.c index 92ba16e1b6fc..7db966dc29ce 100644 --- a/trunk/arch/arm/mach-pxa/ezx.c +++ b/trunk/arch/arm/mach-pxa/ezx.c @@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = { GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, GPIO24_GPIO, /* pcap chip select */ - GPIO1_GPIO, /* pcap interrupt */ - GPIO4_GPIO, /* WDI_AP */ - GPIO55_GPIO, /* SYS_RESTART */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */ + GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */ + GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */ /* MMC */ GPIO32_MMC_CLK, @@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = { #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680) static unsigned long gen1_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO12_GPIO, + GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth (bcm2035) */ - GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO48_GPIO, /* RESET */ GPIO28_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO57_GPIO, /* AP_RDY */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */ - GPIO82_GPIO, /* RESET */ - GPIO99_GPIO, /* TC_MM_EN */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */ + GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ + GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */ /* sound */ GPIO52_SSP3_SCLK, @@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = { defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6) static unsigned long gen2_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO15_GPIO, + GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* EOC */ - GPIO10_GPIO, + GPIO10_GPIO | WAKEUP_ON_EDGE_RISE, /* bluetooth (bcm2045) */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO37_GPIO, /* RESET */ GPIO57_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO96_GPIO, /* AP_RDY */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO116_GPIO, /* RESET */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ GPIO41_GPIO, /* BP_FLASH */ /* sound */ diff --git a/trunk/arch/arm/mach-pxa/imote2.c b/trunk/arch/arm/mach-pxa/imote2.c index 2121309b2474..2b27336c29f1 100644 --- a/trunk/arch/arm/mach-pxa/imote2.c +++ b/trunk/arch/arm/mach-pxa/imote2.c @@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = { */ static struct i2c_board_info __initdata imote2_i2c_board_info[] = { { /* UCAM sensor board */ - .type = "max1238", + .type = "max1239", .addr = 0x35, }, { /* ITS400 Sensor board only */ .type = "max1363", diff --git a/trunk/arch/arm/mach-pxa/include/mach/audio.h b/trunk/arch/arm/mach-pxa/include/mach/audio.h index f82f96dd1053..16eb02552d5d 100644 --- a/trunk/arch/arm/mach-pxa/include/mach/audio.h +++ b/trunk/arch/arm/mach-pxa/include/mach/audio.h @@ -4,12 +4,22 @@ #include #include +/* + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) + * a -1 value means no gpio will be used for reset + + * reset_gpio should only be specified for pxa27x CPUs where a silicon + * bug prevents correct operation of the reset line. If not specified, + * the default behaviour on these CPUs is to consider gpio 113 as the + * AC97 reset line, which is the default on most boards. + */ typedef struct { int (*startup)(struct snd_pcm_substream *, void *); void (*shutdown)(struct snd_pcm_substream *, void *); void (*suspend)(void *); void (*resume)(void *); void *priv; + int reset_gpio; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); diff --git a/trunk/arch/arm/mach-pxa/include/mach/palmasoc.h b/trunk/arch/arm/mach-pxa/include/mach/palmasoc.h index 6c4b1f7de20a..58afb30d5298 100644 --- a/trunk/arch/arm/mach-pxa/include/mach/palmasoc.h +++ b/trunk/arch/arm/mach-pxa/include/mach/palmasoc.h @@ -1,13 +1,8 @@ #ifndef _INCLUDE_PALMASOC_H_ #define _INCLUDE_PALMASOC_H_ + struct palm27x_asoc_info { int jack_gpio; }; -#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data); -#else -static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {} -#endif - #endif diff --git a/trunk/arch/arm/mach-pxa/include/mach/reset.h b/trunk/arch/arm/mach-pxa/include/mach/reset.h index 31e6a7b6ad80..b6c10556fbc7 100644 --- a/trunk/arch/arm/mach-pxa/include/mach/reset.h +++ b/trunk/arch/arm/mach-pxa/include/mach/reset.h @@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask); /** * init_gpio_reset() - register GPIO as reset generator * @gpio: gpio nr - * @output: set gpio as out/low instead of input during normal work + * @output: set gpio as output instead of input during normal work + * @level: output level */ -extern int init_gpio_reset(int gpio, int output); +extern int init_gpio_reset(int gpio, int output, int level); #endif /* __ASM_ARCH_RESET_H */ diff --git a/trunk/arch/arm/mach-pxa/littleton.c b/trunk/arch/arm/mach-pxa/littleton.c index e13f6a81c223..c872b9feb4d4 100644 --- a/trunk/arch/arm/mach-pxa/littleton.c +++ b/trunk/arch/arm/mach-pxa/littleton.c @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = { }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = { }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; diff --git a/trunk/arch/arm/mach-pxa/mfp-pxa2xx.c b/trunk/arch/arm/mach-pxa/mfp-pxa2xx.c index 7ffb91d64c39..cf6b720c055f 100644 --- a/trunk/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/trunk/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { @@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_pgsr[i] = PGSR(i); GPDR(i * 32) = gpdr_lpm[i]; } @@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d) GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; GPDR(i * 32) = saved_gpdr[i]; + PGSR(i) = saved_pgsr[i]; } PSSR = PSSR_RDH | PSSR_PH; return 0; @@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void) if (cpu_is_pxa27x()) pxa27x_mfp_init(); + /* clear RDH bit to enable GPIO receivers after reset/sleep exit */ + PSSR = PSSR_RDH; + /* initialize gafr_run[], pgsr_lpm[] from existing values */ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) gpdr_lpm[i] = GPDR(i * 32); diff --git a/trunk/arch/arm/mach-pxa/mioa701.c b/trunk/arch/arm/mach-pxa/mioa701.c index 9203b069b35c..ff8052ce0a05 100644 --- a/trunk/arch/arm/mach-pxa/mioa701.c +++ b/trunk/arch/arm/mach-pxa/mioa701.c @@ -742,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = { .fast_mode = 1, }; +static pxa2xx_audio_ops_t mioa701_ac97_info = { + .reset_gpio = 95, +}; + /* * Mio global */ @@ -815,7 +819,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/trunk/arch/arm/mach-pxa/palmld.c b/trunk/arch/arm/mach-pxa/palmld.c index ecf5910e39d7..471a853e548b 100644 --- a/trunk/arch/arm/mach-pxa/palmld.c +++ b/trunk/arch/arm/mach-pxa/palmld.c @@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, + GPIO95_AC97_nRESET, /* IrDA */ GPIO108_GPIO, /* ir disable */ @@ -477,10 +479,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmld_asoc_pdata = { .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmld_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmld_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmld_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -544,6 +558,7 @@ static struct platform_device *devices[] __initdata = { &palmld_backlight, &palmld_leds, &power_supply, + &palmld_asoc, }; static struct map_desc palmld_io_desc[] __initdata = { @@ -573,11 +588,10 @@ static void __init palmld_init(void) set_pxa_fb_info(&palmld_lcd_screen); pxa_set_mci_info(&palmld_mci_platform_data); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&palmld_ac97_pdata); pxa_set_ficp_info(&palmld_ficp_platform_data); pxa_set_keypad_info(&palmld_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/trunk/arch/arm/mach-pxa/palmt5.c b/trunk/arch/arm/mach-pxa/palmt5.c index d7f81068c613..05bf979b78a6 100644 --- a/trunk/arch/arm/mach-pxa/palmt5.c +++ b/trunk/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ @@ -420,10 +421,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmt5_asoc_pdata = { .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmt5_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmt5_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmt5_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -486,6 +499,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmt5_backlight, &power_supply, + &palmt5_asoc, }; /* setup udc GPIOs initial state */ @@ -504,12 +518,11 @@ static void __init palmt5_init(void) set_pxa_fb_info(&palmt5_lcd_screen); pxa_set_mci_info(&palmt5_mci_platform_data); palmt5_udc_init(); + pxa_set_ac97_info(&palmt5_ac97_pdata); pxa_set_udc_info(&palmt5_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmt5_ficp_platform_data); pxa_set_keypad_info(&palmt5_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/trunk/arch/arm/mach-pxa/palmtx.c b/trunk/arch/arm/mach-pxa/palmtx.c index 14393d0ad8b8..e99a893c58a7 100644 --- a/trunk/arch/arm/mach-pxa/palmtx.c +++ b/trunk/arch/arm/mach-pxa/palmtx.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -64,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ @@ -433,6 +435,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { .batt_name = "main-batt", }; +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palmtx_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT, +}; + +static pxa2xx_audio_ops_t palmtx_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmtx_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmtx_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -495,6 +516,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmtx_backlight, &power_supply, + &palmtx_asoc, }; static struct map_desc palmtx_io_desc[] __initdata = { @@ -529,8 +551,8 @@ static void __init palmtx_init(void) set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); palmtx_udc_init(); + pxa_set_ac97_info(&palmtx_ac97_pdata); pxa_set_udc_info(&palmtx_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); pxa_set_keypad_info(&palmtx_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); diff --git a/trunk/arch/arm/mach-pxa/pcm990-baseboard.c b/trunk/arch/arm/mach-pxa/pcm990-baseboard.c index 6112740b4ae9..6c12b5a3132f 100644 --- a/trunk/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/trunk/arch/arm/mach-pxa/pcm990-baseboard.c @@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO + 1, + .gpio_base = NR_BUILTIN_GPIO, }; static int gpio_bus_switch; @@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (!gpio_bus_switch) { - ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera"); + ret = gpio_request(NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO + 1; + gpio_bus_switch = NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } else gpio_bus_switch = -EINVAL; diff --git a/trunk/arch/arm/mach-pxa/reset.c b/trunk/arch/arm/mach-pxa/reset.c index df29d45fb4e7..01e9d643394a 100644 --- a/trunk/arch/arm/mach-pxa/reset.c +++ b/trunk/arch/arm/mach-pxa/reset.c @@ -20,7 +20,7 @@ static void do_hw_reset(void); static int reset_gpio = -1; -int init_gpio_reset(int gpio, int output) +int init_gpio_reset(int gpio, int output, int level) { int rc; @@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output) } if (output) - rc = gpio_direction_output(gpio, 0); + rc = gpio_direction_output(gpio, level); else rc = gpio_direction_input(gpio); if (rc) { diff --git a/trunk/arch/arm/mach-pxa/spitz.c b/trunk/arch/arm/mach-pxa/spitz.c index 8c61ddac119e..5a45fe340a10 100644 --- a/trunk/arch/arm/mach-pxa/spitz.c +++ b/trunk/arch/arm/mach-pxa/spitz.c @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) @@ -521,9 +531,15 @@ static int spitz_ohci_init(struct device *dev) return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); } +static void spitz_ohci_exit(struct device *dev) +{ + gpio_free(SPITZ_GPIO_USB_HOST); +} + static struct pxaohci_platform_data spitz_ohci_platform_data = { .port_mode = PMM_NPS_MODE, .init = spitz_ohci_init, + .exit = spitz_ohci_exit, .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION, .power_budget = 150, }; @@ -721,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd) static void __init common_init(void) { - init_gpio_reset(SPITZ_GPIO_ON_RESET, 1); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/trunk/arch/arm/mach-pxa/tosa.c b/trunk/arch/arm/mach-pxa/tosa.c index afac5b6d3d78..a0bd46ef5d30 100644 --- a/trunk/arch/arm/mach-pxa/tosa.c +++ b/trunk/arch/arm/mach-pxa/tosa.c @@ -897,7 +897,7 @@ static void __init tosa_init(void) gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ - init_gpio_reset(TOSA_GPIO_ON_RESET, 0); + init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0); pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; diff --git a/trunk/arch/arm/mach-pxa/viper.c b/trunk/arch/arm/mach-pxa/viper.c index 0e65344e9f53..dd031cc41847 100644 --- a/trunk/arch/arm/mach-pxa/viper.c +++ b/trunk/arch/arm/mach-pxa/viper.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-pxa/zylonite_pxa300.c b/trunk/arch/arm/mach-pxa/zylonite_pxa300.c index c1f73205d078..c256c57642c0 100644 --- a/trunk/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/trunk/arch/arm/mach-pxa/zylonite_pxa300.c @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, @@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { diff --git a/trunk/arch/arm/mach-pxa/zylonite_pxa320.c b/trunk/arch/arm/mach-pxa/zylonite_pxa320.c index 4e1c488c6906..cc5a22833605 100644 --- a/trunk/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/trunk/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, diff --git a/trunk/arch/arm/mach-realview/core.c b/trunk/arch/arm/mach-realview/core.c index 942e1a7eb9b2..076acbc50706 100644 --- a/trunk/arch/arm/mach-realview/core.c +++ b/trunk/arch/arm/mach-realview/core.c @@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - /* - * The dummy clock device has to be registered before the main device - * so that the latter will broadcast the clock events - */ - local_timer_setup(); -#endif - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/trunk/arch/arm/mach-realview/include/mach/smp.h b/trunk/arch/arm/mach-realview/include/mach/smp.h index 515819efd046..dd53892d44a7 100644 --- a/trunk/arch/arm/mach-realview/include/mach/smp.h +++ b/trunk/arch/arm/mach-realview/include/mach/smp.h @@ -15,16 +15,9 @@ /* * We use IRQ1 as the IPI */ -static inline void smp_cross_call(cpumask_t callmap) -{ - gic_raise_softirq(callmap, 1); -} - -/* - * Do nothing on MPcore. - */ -static inline void smp_cross_call_done(cpumask_t callmap) +static inline void smp_cross_call(const struct cpumask *mask) { + gic_raise_softirq(mask, 1); } #endif diff --git a/trunk/arch/arm/mach-realview/localtimer.c b/trunk/arch/arm/mach-realview/localtimer.c index d0d39adf6407..1c01d13460f0 100644 --- a/trunk/arch/arm/mach-realview/localtimer.c +++ b/trunk/arch/arm/mach-realview/localtimer.c @@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void) struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_DUMMY; - clk->rating = 200; + clk->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY; + clk->rating = 400; clk->mult = 1; clk->set_mode = dummy_timer_set_mode; clk->broadcast = smp_timer_broadcast; diff --git a/trunk/arch/arm/mach-realview/platsmp.c b/trunk/arch/arm/mach-realview/platsmp.c index ea3c75595fa9..30a9c68591f6 100644 --- a/trunk/arch/arm/mach-realview/platsmp.c +++ b/trunk/arch/arm/mach-realview/platsmp.c @@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) { trace_hardirqs_off(); - /* - * the primary core may have used a "cross call" soft interrupt - * to get this processor out of WFI in the BootMonitor - make - * sure that we are no longer being sent this soft interrupt - */ - smp_cross_call_done(cpumask_of_cpu(cpu)); - /* * if any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled @@ -136,7 +129,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Use smp_cross_call() for this, since there's little * point duplicating the code here */ - smp_cross_call(cpumask_of_cpu(cpu)); + smp_cross_call(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -224,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; -#ifdef CONFIG_LOCAL_TIMERS +#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) /* - * Enable the local timer for primary CPU. If the device is - * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in - * realview_timer_init + * Enable the local timer or broadcast device for the boot CPU. */ local_timer_setup(); #endif diff --git a/trunk/arch/arm/mach-s3c2410/mach-bast.c b/trunk/arch/arm/mach-s3c2410/mach-bast.c index 4389c160f7d0..8637dea5e150 100644 --- a/trunk/arch/arm/mach-s3c2410/mach-bast.c +++ b/trunk/arch/arm/mach-s3c2410/mach-bast.c @@ -588,8 +588,6 @@ static void __init bast_map_io(void) s3c_device_nand.dev.platform_data = &bast_nand_info; - s3c_i2c0_set_platdata(&bast_i2c_info); - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); @@ -602,6 +600,7 @@ static void __init bast_init(void) sysdev_class_register(&bast_pm_sysclass); sysdev_register(&bast_pm_sysdev); + s3c_i2c0_set_platdata(&bast_i2c_info); s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); diff --git a/trunk/arch/arm/mach-s3c2412/pm.c b/trunk/arch/arm/mach-s3c2412/pm.c index c9cfe40e21f6..a7417c479ffe 100644 --- a/trunk/arch/arm/mach-s3c2412/pm.c +++ b/trunk/arch/arm/mach-s3c2412/pm.c @@ -21,6 +21,7 @@ #include #include +#include #include #include @@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void) { unsigned long tmp; + flush_cache_all(); + /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); diff --git a/trunk/arch/arm/mach-s3c6400/include/mach/map.h b/trunk/arch/arm/mach-s3c6400/include/mach/map.h index baf1c0f1ea5a..8199972ed5bd 100644 --- a/trunk/arch/arm/mach-s3c6400/include/mach/map.h +++ b/trunk/arch/arm/mach-s3c6400/include/mach/map.h @@ -40,6 +40,8 @@ #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) #define S3C64XX_PA_IIC1 (0x7F00F000) diff --git a/trunk/arch/arm/mach-sa1100/lart.c b/trunk/arch/arm/mach-sa1100/lart.c index 0cd52692d2f7..1f940df0e5af 100644 --- a/trunk/arch/arm/mach-sa1100/lart.c +++ b/trunk/arch/arm/mach-sa1100/lart.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-versatile/core.c b/trunk/arch/arm/mach-versatile/core.c index 1f929c391af7..b3bebcc5623b 100644 --- a/trunk/arch/arm/mach-versatile/core.c +++ b/trunk/arch/arm/mach-versatile/core.c @@ -413,7 +413,7 @@ static struct clk ref24_clk = { .rate = 24000000, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "dev:f1", .clk = &ref24_clk, diff --git a/trunk/arch/arm/mm/cache-v6.S b/trunk/arch/arm/mm/cache-v6.S index 2c6c2a7c05a0..8f5c13f4c936 100644 --- a/trunk/arch/arm/mm/cache-v6.S +++ b/trunk/arch/arm/mm/cache-v6.S @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,7 +56,11 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + b v6_icache_inval_all +#endif #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif @@ -103,7 +132,11 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + b v6_icache_inval_all +#endif #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif diff --git a/trunk/arch/arm/mm/flush.c b/trunk/arch/arm/mm/flush.c index 4e283481cee1..c07222eb5ce0 100644 --- a/trunk/arch/arm/mm/flush.c +++ b/trunk/arch/arm/mm/flush.c @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } diff --git a/trunk/arch/arm/mm/proc-v6.S b/trunk/arch/arm/mm/proc-v6.S index f0cc599facb7..087e239704df 100644 --- a/trunk/arch/arm/mm/proc-v6.S +++ b/trunk/arch/arm/mm/proc-v6.S @@ -10,6 +10,7 @@ * * This is the "shell" of the ARMv6 processor support. */ +#include #include #include #include @@ -132,7 +133,7 @@ cpu_v6_name: .asciz "ARMv6-compatible processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v6_setup diff --git a/trunk/arch/arm/mm/proc-v7.S b/trunk/arch/arm/mm/proc-v7.S index d1ebec42521d..a08d9d2380d3 100644 --- a/trunk/arch/arm/mm/proc-v7.S +++ b/trunk/arch/arm/mm/proc-v7.S @@ -9,6 +9,7 @@ * * This is the "shell" of the ARMv7 processor support. */ +#include #include #include #include @@ -95,6 +96,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -153,7 +157,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v7_setup @@ -180,7 +184,37 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} - mov r10, #0 + + mrc p15, 0, r0, c0, c0, 0 @ read main ID register + and r10, r0, #0xff000000 @ ARM? + teq r10, #0x41000000 + bne 2f + and r5, r0, #0x00f00000 @ variant + and r6, r0, #0x0000000f @ revision + orr r0, r6, r5, lsr #20-4 @ combine variant and revision + +#ifdef CONFIG_ARM_ERRATA_430973 + teq r5, #0x00100000 @ only present in r1p* + mrceq p15, 0, r10, c1, c0, 1 @ read aux control register + orreq r10, r10, #(1 << 6) @ set IBE to 1 + mcreq p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + teq r0, #0x20 @ only present in r2p0 + mrceq p15, 0, r10, c1, c0, 1 @ read aux control register + orreq r10, r10, #(1 << 5) @ set L1NEON to 1 + orreq r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcreq p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + teq r0, #0x20 @ only present in r2p0 + mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + tsteq r10, #1 << 22 + orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register +#endif + +2: mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif diff --git a/trunk/arch/arm/mm/tlb-v6.S b/trunk/arch/arm/mm/tlb-v6.S index 20f84bbaa9bb..73d7d89b04c4 100644 --- a/trunk/arch/arm/mm/tlb-v6.S +++ b/trunk/arch/arm/mm/tlb-v6.S @@ -10,6 +10,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr - .section ".text.init", #alloc, #execinstr + __INIT .type v6wbi_tlb_fns, #object ENTRY(v6wbi_tlb_fns) diff --git a/trunk/arch/arm/mm/tlb-v7.S b/trunk/arch/arm/mm/tlb-v7.S index 24ba5109f2e7..b637e7380ab7 100644 --- a/trunk/arch/arm/mm/tlb-v7.S +++ b/trunk/arch/arm/mm/tlb-v7.S @@ -11,6 +11,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov pc, lr ENDPROC(v7wbi_flush_kern_tlb_range) - .section ".text.init", #alloc, #execinstr + __INIT .type v7wbi_tlb_fns, #object ENTRY(v7wbi_tlb_fns) diff --git a/trunk/arch/arm/nwfpe/fpa11.h b/trunk/arch/arm/nwfpe/fpa11.h index 386cbd13eaf4..d3a6f9298e9e 100644 --- a/trunk/arch/arm/nwfpe/fpa11.h +++ b/trunk/arch/arm/nwfpe/fpa11.h @@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData, extern unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +/* extneded_cpdo.c */ +extern unsigned int ExtendedCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); + #endif diff --git a/trunk/arch/arm/nwfpe/fpa11_cprt.c b/trunk/arch/arm/nwfpe/fpa11_cprt.c index 9843dc533047..31c4eeec18b0 100644 --- a/trunk/arch/arm/nwfpe/fpa11_cprt.c +++ b/trunk/arch/arm/nwfpe/fpa11_cprt.c @@ -27,10 +27,6 @@ #include "fpmodule.inl" #include "softfloat.h" -#ifdef CONFIG_FPE_NWFPE_XP -extern flag floatx80_is_nan(floatx80); -#endif - unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); diff --git a/trunk/arch/arm/nwfpe/softfloat.h b/trunk/arch/arm/nwfpe/softfloat.h index 260fe29d73f5..13e479c5da57 100644 --- a/trunk/arch/arm/nwfpe/softfloat.h +++ b/trunk/arch/arm/nwfpe/softfloat.h @@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 ); char floatx80_lt_quiet( floatx80, floatx80 ); char floatx80_is_signaling_nan( floatx80 ); +extern flag floatx80_is_nan(floatx80); + #endif static inline flag extractFloat32Sign(float32 a) diff --git a/trunk/arch/arm/plat-mxc/dma-mx1-mx2.c b/trunk/arch/arm/plat-mxc/dma-mx1-mx2.c index e364a5ed10f1..77646436c00e 100644 --- a/trunk/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/trunk/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); @@ -737,10 +733,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 diff --git a/trunk/arch/arm/plat-mxc/gpio.c b/trunk/arch/arm/plat-mxc/gpio.c index c6483bad8a26..89e95798cc3b 100644 --- a/trunk/arch/arm/plat-mxc/gpio.c +++ b/trunk/arch/arm/plat-mxc/gpio.c @@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif diff --git a/trunk/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/trunk/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 1cac9d1135cd..d42f4e6116f8 100644 --- a/trunk/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/trunk/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) diff --git a/trunk/arch/arm/plat-mxc/include/mach/imx-uart.h b/trunk/arch/arm/plat-mxc/include/mach/imx-uart.h index 599217b2e13f..f9bd17dd8dd7 100644 --- a/trunk/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/trunk/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -20,11 +20,16 @@ #define ASMARM_ARCH_UART_H #define IMXUART_HAVE_RTSCTS (1<<0) +#define IMXUART_IRDA (1<<1) struct imxuart_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); unsigned int flags; + void (*irda_enable)(int enable); + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short transceiver_delay; }; #endif diff --git a/trunk/arch/arm/plat-omap/clock.c b/trunk/arch/arm/plat-omap/clock.c index 2e0614552ac8..29efc279287a 100644 --- a/trunk/arch/arm/plat-omap/clock.c +++ b/trunk/arch/arm/plat-omap/clock.c @@ -239,6 +239,13 @@ void recalculate_root_clocks(void) } } +/** + * clk_init_one - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ void clk_init_one(struct clk *clk) { INIT_LIST_HEAD(&clk->children); diff --git a/trunk/arch/arm/plat-omap/dma.c b/trunk/arch/arm/plat-omap/dma.c index 21cc0142b97a..7fc8c045ad5d 100644 --- a/trunk/arch/arm/plat-omap/dma.c +++ b/trunk/arch/arm/plat-omap/dma.c @@ -760,19 +760,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +791,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); diff --git a/trunk/arch/arm/plat-omap/dmtimer.c b/trunk/arch/arm/plat-omap/dmtimer.c index bfd47570cc91..55bb99631292 100644 --- a/trunk/arch/arm/plat-omap/dmtimer.c +++ b/trunk/arch/arm/plat-omap/dmtimer.c @@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { @@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); @@ -511,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -519,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); diff --git a/trunk/arch/arm/plat-omap/fb.c b/trunk/arch/arm/plat-omap/fb.c index ce6b4baeedec..3746222bed10 100644 --- a/trunk/arch/arm/plat-omap/fb.c +++ b/trunk/arch/arm/plat-omap/fb.c @@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void) config_invalid = 1; return; } - if (rg.paddr) + if (rg.paddr) { reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); - reserved += rg.size; + reserved += rg.size; + } omapfb_config.mem_desc.region[i] = rg; configured_regions++; } diff --git a/trunk/arch/arm/plat-omap/gpio.c b/trunk/arch/arm/plat-omap/gpio.c index d3fa41e3d8c5..ee0b21f5b094 100644 --- a/trunk/arch/arm/plat-omap/gpio.c +++ b/trunk/arch/arm/plat-omap/gpio.c @@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; - if (cpu_is_omap34xx() && gpio < 160) + if (cpu_is_omap34xx() && gpio < 192) return 0; return -1; } @@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } @@ -921,13 +925,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +941,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif diff --git a/trunk/arch/arm/plat-omap/include/mach/dmtimer.h b/trunk/arch/arm/plat-omap/include/mach/dmtimer.h index 6dc703138210..20f1054c0a80 100644 --- a/trunk/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/trunk/arch/arm/plat-omap/include/mach/dmtimer.h @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer); void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff --git a/trunk/arch/arm/plat-omap/include/mach/eac.h b/trunk/arch/arm/plat-omap/include/mach/eac.h deleted file mode 100644 index 9e62cf030270..000000000000 --- a/trunk/arch/arm/plat-omap/include/mach/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include -#include -#include - -#include - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/trunk/arch/arm/plat-omap/include/mach/gpioexpander.h b/trunk/arch/arm/plat-omap/include/mach/gpioexpander.h deleted file mode 100644 index 90444a0d6b1a..000000000000 --- a/trunk/arch/arm/plat-omap/include/mach/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/trunk/arch/arm/plat-omap/include/mach/irda.h b/trunk/arch/arm/plat-omap/include/mach/irda.h index 8372a00d8e0b..40f60339d1c6 100644 --- a/trunk/arch/arm/plat-omap/include/mach/irda.h +++ b/trunk/arch/arm/plat-omap/include/mach/irda.h @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; diff --git a/trunk/arch/arm/plat-omap/include/mach/mmc.h b/trunk/arch/arm/plat-omap/include/mach/mmc.h index 4435bd434e17..81d5b36534b3 100644 --- a/trunk/arch/arm/plat-omap/include/mach/mmc.h +++ b/trunk/arch/arm/plat-omap/include/mach/mmc.h @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff --git a/trunk/arch/arm/plat-omap/include/mach/timer-gp.h b/trunk/arch/arm/plat-omap/include/mach/timer-gp.h new file mode 100644 index 000000000000..c88d346b59d9 --- /dev/null +++ b/trunk/arch/arm/plat-omap/include/mach/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + diff --git a/trunk/arch/arm/plat-omap/mailbox.c b/trunk/arch/arm/plat-omap/mailbox.c index 0abfbaa59871..40424edae939 100644 --- a/trunk/arch/arm/plat-omap/mailbox.c +++ b/trunk/arch/arm/plat-omap/mailbox.c @@ -147,24 +147,40 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg) return ret; } +struct omap_msg_tx_data { + mbox_msg_t msg; + void *arg; +}; + +static void omap_msg_tx_end_io(struct request *rq, int error) +{ + kfree(rq->special); + __blk_put_request(rq->q, rq); +} + int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg) { + struct omap_msg_tx_data *tx_data; struct request *rq; struct request_queue *q = mbox->txq->queue; - int ret = 0; + + tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC); + if (unlikely(!tx_data)) + return -ENOMEM; rq = blk_get_request(q, WRITE, GFP_ATOMIC); if (unlikely(!rq)) { - ret = -ENOMEM; - goto fail; + kfree(tx_data); + return -ENOMEM; } - rq->data = (void *)msg; - blk_insert_request(q, rq, 0, arg); + tx_data->msg = msg; + tx_data->arg = arg; + rq->end_io = omap_msg_tx_end_io; + blk_insert_request(q, rq, 0, tx_data); schedule_work(&mbox->txq->work); - fail: - return ret; + return 0; } EXPORT_SYMBOL(omap_mbox_msg_send); @@ -178,22 +194,28 @@ static void mbox_tx_work(struct work_struct *work) struct request_queue *q = mbox->txq->queue; while (1) { + struct omap_msg_tx_data *tx_data; + spin_lock(q->queue_lock); - rq = elv_next_request(q); + rq = blk_fetch_request(q); spin_unlock(q->queue_lock); if (!rq) break; - ret = __mbox_msg_send(mbox, (mbox_msg_t) rq->data, rq->special); + tx_data = rq->special; + + ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg); if (ret) { enable_mbox_irq(mbox, IRQ_TX); + spin_lock(q->queue_lock); + blk_requeue_request(q, rq); + spin_unlock(q->queue_lock); return; } spin_lock(q->queue_lock); - if (__blk_end_request(rq, 0, 0)) - BUG(); + __blk_end_request_all(rq, 0); spin_unlock(q->queue_lock); } } @@ -218,16 +240,13 @@ static void mbox_rx_work(struct work_struct *work) while (1) { spin_lock_irqsave(q->queue_lock, flags); - rq = elv_next_request(q); + rq = blk_fetch_request(q); spin_unlock_irqrestore(q->queue_lock, flags); if (!rq) break; - msg = (mbox_msg_t) rq->data; - - if (blk_end_request(rq, 0, 0)) - BUG(); - + msg = (mbox_msg_t)rq->special; + blk_end_request_all(rq, 0); mbox->rxq->callback((void *)msg); } } @@ -264,7 +283,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) goto nomem; msg = mbox_fifo_read(mbox); - rq->data = (void *)msg; if (unlikely(mbox_seq_test(mbox, msg))) { pr_info("mbox: Illegal seq bit!(%08x)\n", msg); @@ -272,7 +290,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) mbox->err_notify(); } - blk_insert_request(q, rq, 0, NULL); + blk_insert_request(q, rq, 0, (void *)msg); if (mbox->ops->type == OMAP_MBOX_TYPE1) break; } @@ -329,16 +347,15 @@ omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf) while (1) { spin_lock_irqsave(q->queue_lock, flags); - rq = elv_next_request(q); + rq = blk_fetch_request(q); spin_unlock_irqrestore(q->queue_lock, flags); if (!rq) break; - *p = (mbox_msg_t) rq->data; + *p = (mbox_msg_t)rq->special; - if (blk_end_request(rq, 0, 0)) - BUG(); + blk_end_request_all(rq, 0); if (unlikely(mbox_seq_test(mbox, *p))) { pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p); diff --git a/trunk/arch/arm/plat-orion/time.c b/trunk/arch/arm/plat-orion/time.c index 2faf9dba4ef7..de8a001fc3a9 100644 --- a/trunk/arch/arm/plat-orion/time.c +++ b/trunk/arch/arm/plat-orion/time.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include /* * Number of timer ticks per jiffy. diff --git a/trunk/arch/arm/plat-pxa/gpio.c b/trunk/arch/arm/plat-pxa/gpio.c index af819bf21b63..abc79d44acaa 100644 --- a/trunk/arch/arm/plat-pxa/gpio.c +++ b/trunk/arch/arm/plat-pxa/gpio.c @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end) return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end) return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { diff --git a/trunk/arch/arm/plat-s3c/clock.c b/trunk/arch/arm/plat-s3c/clock.c index b6be76e2fe51..4d01ef1a25dd 100644 --- a/trunk/arch/arm/plat-s3c/clock.c +++ b/trunk/arch/arm/plat-s3c/clock.c @@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = { int s3c24xx_register_clock(struct clk *clk) { - clk->owner = THIS_MODULE; - if (clk->enable == NULL) clk->enable = clk_null_enable; diff --git a/trunk/arch/arm/plat-s3c24xx/dma.c b/trunk/arch/arm/plat-s3c24xx/dma.c index aee2aeb46c60..07326f632361 100644 --- a/trunk/arch/arm/plat-s3c24xx/dma.c +++ b/trunk/arch/arm/plat-s3c24xx/dma.c @@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d EXPORT_SYMBOL(s3c2410_dma_getposition); -static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) { return container_of(dev, struct s3c2410_dma_chan, dev); } diff --git a/trunk/arch/arm/plat-s3c64xx/gpiolib.c b/trunk/arch/arm/plat-s3c64xx/gpiolib.c index ee9188add8fb..78ee52cffc9e 100644 --- a/trunk/arch/arm/plat-s3c64xx/gpiolib.c +++ b/trunk/arch/arm/plat-s3c64xx/gpiolib.c @@ -57,7 +57,7 @@ #if 1 #define gpio_dbg(x...) do { } while(0) #else -#define gpio_dbg(x...) printk(KERN_DEBUG ## x) +#define gpio_dbg(x...) printk(KERN_DEBUG x) #endif /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where diff --git a/trunk/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/trunk/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h index 81549516572f..2ba1767512d7 100644 --- a/trunk/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ b/trunk/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h @@ -61,14 +61,14 @@ #define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) #define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32) - -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36) +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) +#define S3C64XX_GPH9_OUTPUT (0x01 << 4) +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/trunk/arch/arm/tools/mach-types b/trunk/arch/arm/tools/mach-types index 945e0d237a1d..fec64678a63a 100644 --- a/trunk/arch/arm/tools/mach-types +++ b/trunk/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Mar 23 20:09:01 2009 +# Last update: Fri May 29 10:14:20 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -palmt650 MACH_PALMT650 PALMT650 909 +treo650 MACH_TREO650 TREO650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226 vpac270 MACH_VPAC270 VPAC270 1227 rd129 MACH_RD129 RD129 1228 htcwizard MACH_HTCWIZARD HTCWIZARD 1229 -xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230 +treo680 MACH_TREO680 TREO680 1230 tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 zylonite MACH_ZYLONITE ZYLONITE 1233 gene1270 MACH_GENE1270 GENE1270 1234 @@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417 cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 app3xx MACH_APP3XX APP3XX 1419 sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421 -palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422 -palmtreo750 MACH_PALMTREO750 PALMTREO750 1423 -palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424 +treo700p MACH_TREO700P TREO700P 1421 +treo700w MACH_TREO700W TREO700W 1422 +treo750 MACH_TREO750 TREO750 1423 +treo755p MACH_TREO755P TREO755P 1424 ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 sarge MACH_SARGE SARGE 1426 a696 MACH_A696 A696 1427 @@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729 csb637xo MACH_CSB637XO CSB637XO 1730 evisiong MACH_EVISIONG EVISIONG 1731 stmp37xx MACH_STMP37XX STMP37XX 1732 -stmp378x MACH_STMP38XX STMP38XX 1733 +stmp378x MACH_STMP378X STMP378X 1733 tnt MACH_TNT TNT 1734 tbxt MACH_TBXT TBXT 1735 playmate MACH_PLAYMATE PLAYMATE 1736 @@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829 -at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830 +at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831 hit_b0 MACH_HIT_B0 HIT_B0 1832 adx_rmu MACH_ADX_RMU ADX_RMU 1833 @@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141 at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142 spc300 MACH_SPC300 SPC300 2143 eko MACH_EKO EKO 2144 +ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145 +ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146 +m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147 +str9104nas MACH_STAR9104NAS STAR9104NAS 2148 +pca100 MACH_PCA100 PCA100 2149 +z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150 +hipox MACH_HIPOX HIPOX 2151 +omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152 +bm150r MACH_BM150R BM150R 2153 +tbone MACH_TBONE TBONE 2154 +merlin MACH_MERLIN MERLIN 2155 +falcon MACH_FALCON FALCON 2156 +davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 +s5p6440 MACH_S5P6440 S5P6440 2158 +at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 +omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 +lpc313x MACH_LPC313X LPC313X 2161 +magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 +magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163 +magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164 +meesc MACH_MEESC MEESC 2165 +otc570 MACH_OTC570 OTC570 2166 +bcu2412 MACH_BCU2412 BCU2412 2167 +beacon MACH_BEACON BEACON 2168 +actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169 +e4430 MACH_E4430 E4430 2170 +ql300 MACH_QL300 QL300 2171 +btmavb101 MACH_BTMAVB101 BTMAVB101 2172 +btmawb101 MACH_BTMAWB101 BTMAWB101 2173 +sq201 MACH_SQ201 SQ201 2174 +quatro45xx MACH_QUATRO45XX QUATRO45XX 2175 +openpad MACH_OPENPAD OPENPAD 2176 +tx25 MACH_TX25 TX25 2177 +omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 +htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179 +lal43 MACH_LAL43 LAL43 2181 +htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182 +anw6410 MACH_ANW6410 ANW6410 2183 +htcprophet MACH_HTCPROPHET HTCPROPHET 2185 +cfa_10022 MACH_CFA_10022 CFA_10022 2186 +imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 +px2imx27 MACH_PX2IMX27 PX2IMX27 2188 +stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189 +dvs10 MACH_DVS10 DVS10 2190 +portuxg20 MACH_PORTUXG20 PORTUXG20 2191 +arm_spv MACH_ARM_SPV ARM_SPV 2192 +smdkc110 MACH_SMDKC110 SMDKC110 2193 +cabespresso MACH_CABESPRESSO CABESPRESSO 2194 +hmc800 MACH_HMC800 HMC800 2195 +sholes MACH_SHOLES SHOLES 2196 +btmxc31 MACH_BTMXC31 BTMXC31 2197 +dt501 MACH_DT501 DT501 2198 +ktx MACH_KTX KTX 2199 +omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 +netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 +netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 +d2net_v2 MACH_D2NET_V2 D2NET_V2 2203 +net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204 +net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205 +net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206 +endb2443 MACH_ENDB2443 ENDB2443 2207 +inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208 +tros MACH_TROS TROS 2209 +pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210 +ofsp8 MACH_OFSP8 OFSP8 2211 +at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212 +guf_cupid MACH_GUF_CUPID GUF_CUPID 2213 +eab1r MACH_EAB1R EAB1R 2214 +desirec MACH_DESIREC DESIREC 2215 +cordoba MACH_CORDOBA CORDOBA 2216 +irvine MACH_IRVINE IRVINE 2217 +sff772 MACH_SFF772 SFF772 2218 +pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219 +pc7302 MACH_PC7302 PC7302 2220 +bip6000 MACH_BIP6000 BIP6000 2221 +silvermoon MACH_SILVERMOON SILVERMOON 2222 +vc0830 MACH_VC0830 VC0830 2223 +dt430 MACH_DT430 DT430 2224 +ji42pf MACH_JI42PF JI42PF 2225 +gnet_ksm MACH_GNET_KSM GNET_KSM 2226 +gnet_sgm MACH_GNET_SGM GNET_SGM 2227 +gnet_sgr MACH_GNET_SGR GNET_SGR 2228 +omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229 +pnp MACH_PNP PNP 2230 +ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231 +ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232 +sas_c MACH_SAS_C SAS_C 2233 +vma2315 MACH_VMA2315 VMA2315 2234 +vcs MACH_VCS VCS 2235 +spear600 MACH_SPEAR600 SPEAR600 2236 +spear300 MACH_SPEAR300 SPEAR300 2237 +spear1300 MACH_SPEAR1300 SPEAR1300 2238 +lilly1131 MACH_LILLY1131 LILLY1131 2239 +arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240 +mapphone MACH_MAPPHONE MAPPHONE 2241 +legend MACH_LEGEND LEGEND 2242 +salsa MACH_SALSA SALSA 2243 +lounge MACH_LOUNGE LOUNGE 2244 +vision MACH_VISION VISION 2245 +vmb20 MACH_VMB20 VMB20 2246 +hy2410 MACH_HY2410 HY2410 2247 +hy9315 MACH_HY9315 HY9315 2248 +bullwinkle MACH_BULLWINKLE BULLWINKLE 2249 +arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 +vs_v210 MACH_VS_V210 VS_V210 2252 +vs_v212 MACH_VS_V212 VS_V212 2253 +hmt MACH_HMT HMT 2254 +suen3 MACH_SUEN3 SUEN3 2255 +vesper MACH_VESPER VESPER 2256 +str9 MACH_STR9 STR9 2257 +omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 +simcom MACH_SIMCOM SIMCOM 2259 +mcwebio MACH_MCWEBIO MCWEBIO 2260 diff --git a/trunk/arch/avr32/Makefile b/trunk/arch/avr32/Makefile index 0b97e14f73f6..c21a3290d542 100644 --- a/trunk/arch/avr32/Makefile +++ b/trunk/arch/avr32/Makefile @@ -43,8 +43,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch - BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install diff --git a/trunk/arch/avr32/kernel/module.c b/trunk/arch/avr32/kernel/module.c index 1167fe9cf6c4..98f94d041d9c 100644 --- a/trunk/arch/avr32/kernel/module.c +++ b/trunk/arch/avr32/kernel/module.c @@ -32,8 +32,6 @@ void module_free(struct module *mod, void *module_region) mod->arch.syminfo = NULL; vfree(module_region); - /* FIXME: if module_region == mod->init_region, trim exception - * table entries. */ } static inline int check_rela(Elf32_Rela *rela, struct module *module, diff --git a/trunk/arch/blackfin/include/asm/.gitignore b/trunk/arch/blackfin/include/asm/.gitignore deleted file mode 100644 index 7858564a4466..000000000000 --- a/trunk/arch/blackfin/include/asm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -+mach diff --git a/trunk/arch/blackfin/include/asm/flat.h b/trunk/arch/blackfin/include/asm/flat.h index e70074e05f4e..733a178d782d 100644 --- a/trunk/arch/blackfin/include/asm/flat.h +++ b/trunk/arch/blackfin/include/asm/flat.h @@ -10,7 +10,6 @@ #include -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) diff --git a/trunk/arch/blackfin/include/asm/unistd.h b/trunk/arch/blackfin/include/asm/unistd.h index 1e57b636e0bc..cf5066d3efd2 100644 --- a/trunk/arch/blackfin/include/asm/unistd.h +++ b/trunk/arch/blackfin/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_dup3 363 #define __NR_pipe2 364 #define __NR_inotify_init1 365 +#define __NR_preadv 366 +#define __NR_pwritev 367 -#define __NR_syscall 366 +#define __NR_syscall 368 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/trunk/arch/blackfin/kernel/.gitignore b/trunk/arch/blackfin/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/trunk/arch/blackfin/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/trunk/arch/blackfin/lib/strncmp.c b/trunk/arch/blackfin/lib/strncmp.c index 2aaae78a68e0..46518b1d2983 100644 --- a/trunk/arch/blackfin/lib/strncmp.c +++ b/trunk/arch/blackfin/lib/strncmp.c @@ -8,9 +8,8 @@ #define strncmp __inline_strncmp #include -#undef strncmp - #include +#undef strncmp int strncmp(const char *cs, const char *ct, size_t count) { diff --git a/trunk/arch/blackfin/mach-common/entry.S b/trunk/arch/blackfin/mach-common/entry.S index 21e65a339a22..a063a434f7e3 100644 --- a/trunk/arch/blackfin/mach-common/entry.S +++ b/trunk/arch/blackfin/mach-common/entry.S @@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table) .long _sys_dup3 .long _sys_pipe2 .long _sys_inotify_init1 /* 365 */ + .long _sys_preadv + .long _sys_pwritev .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/trunk/arch/cris/Makefile b/trunk/arch/cris/Makefile index 3662cfb7b61d..71e17d3eeddb 100644 --- a/trunk/arch/cris/Makefile +++ b/trunk/arch/cris/Makefile @@ -70,7 +70,7 @@ SRC_ARCH = $(srctree)/arch/cris # cris object files path OBJ_ARCH = $(objtree)/arch/cris -boot := arch/cris/$(SARCH)/boot +boot := arch/cris/boot MACHINE := arch/cris/$(SARCH) all: zImage @@ -81,15 +81,15 @@ zImage Image: vmlinux archprepare: archclean: - $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \ - $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \ + $(Q)if [ -e arch/cris/boot ]; then \ + $(MAKE) $(clean)=arch/cris/boot; \ fi CLEAN_FILES += \ - $(MACHINE)/boot/zImage \ - $(MACHINE)/boot/compressed/decompress.bin \ - $(MACHINE)/boot/compressed/piggy.gz \ - $(MACHINE)/boot/rescue/rescue.bin + $(boot)/zImage \ + $(boot)/compressed/decompress.bin \ + $(boot)/compressed/piggy.gz \ + $(boot)/rescue/rescue.bin # MRPROPER_FILES += diff --git a/trunk/arch/cris/arch-v10/boot/compressed/README b/trunk/arch/cris/arch-v10/boot/compressed/README deleted file mode 100644 index 48b3db9924b9..000000000000 --- a/trunk/arch/cris/arch-v10/boot/compressed/README +++ /dev/null @@ -1,25 +0,0 @@ -Creation of the self-extracting compressed kernel image (vmlinuz) ------------------------------------------------------------------ -$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $ - -This can be slightly confusing because it's a process with many steps. - -The kernel object built by the arch/etrax100/Makefile, vmlinux, is split -by that makefile into text and data binary files, vmlinux.text and -vmlinux.data. - -Those files together with a ROM filesystem can be catted together and -burned into a flash or executed directly at the DRAM origin. - -They can also be catted together and compressed with gzip, which is what -happens in this makefile. Together they make up piggy.img. - -The decompressor is built into the file decompress.o. It is turned into -the binary file decompress.bin, which is catted together with piggy.img -into the file vmlinuz. It can be executed in an arbitrary place in flash. - -Be careful - it assumes some things about free locations in DRAM. It -assumes the DRAM starts at 0x40000000 and that it is at least 8 MB, -so it puts its code at 0x40700000, and initial stack at 0x40800000. - --Bjorn diff --git a/trunk/arch/cris/arch-v10/boot/compressed/misc.c b/trunk/arch/cris/arch-v10/boot/compressed/misc.c deleted file mode 100644 index a4db1507d3b1..000000000000 --- a/trunk/arch/cris/arch-v10/boot/compressed/misc.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adaptation for Linux/CRIS Axis Communications AB, 1999 - * - */ - -/* where the piggybacked kernel image expects itself to live. - * it is the same address we use when we network load an uncompressed - * image into DRAM, and it is the address the kernel is linked to live - * at by vmlinux.lds.S - */ - -#define KERNEL_LOAD_ADR 0x40004000 - - -#include -#include - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -void *memset(void *s, int c, size_t n); -void *memcpy(void *__dest, __const void *__src, size_t __n); - -#define memzero(s, n) memset((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -unsigned inptr = 0; /* index of next byte to be processed in inbuf - * After decompression it will contain the - * compressed size, and head.S will read it. - */ - -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inbuf[inptr++]) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond, msg) do { \ - if (!(cond)) \ - error(msg); \ - } while (0) -# define Trace(x) fprintf x -# define Tracev(x) do { \ - if (verbose) \ - fprintf x; \ - } while (0) -# define Tracevv(x) do { \ - if (verbose > 1) \ - fprintf x; \ - } while (0) -# define Tracec(c, x) do { \ - if (verbose && (c)) \ - fprintf x; \ - } while (0) -# define Tracecv(c, x) do { \ - if (verbose > 1 && (c)) \ - fprintf x; \ - } while (0) -#else -# define Assert(cond, msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c, x) -# define Tracecv(c, x) -#endif - -static void flush_window(void); -static void error(char *m); - -extern char *input_data; /* lives in head.S */ - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; -static void puts(const char *); - -/* the "heap" is put directly after the BSS ends, at end */ - -extern int _end; -static long free_mem_ptr = (long)&_end; -static long free_mem_end_ptr; - -#include "../../../../../lib/inflate.c" - -/* decompressor info and error messages to serial console */ - -static void -puts(const char *s) -{ -#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL - while (*s) { -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - while (!(*R_SERIAL0_STATUS & (1 << 5))) ; - *R_SERIAL0_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - while (!(*R_SERIAL1_STATUS & (1 << 5))) ; - *R_SERIAL1_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - while (!(*R_SERIAL2_STATUS & (1 << 5))) ; - *R_SERIAL2_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - while (!(*R_SERIAL3_STATUS & (1 << 5))) ; - *R_SERIAL3_TR_DATA = *s++; -#endif - } -#endif -} - -void *memset(void *s, int c, size_t n) -{ - int i; - char *ss = (char *)s; - - for (i = 0; i < n; i++) - ss[i] = c; - - return s; -} - -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i; - char *d = (char *)__dest, *s = (char *)__src; - - for (i = 0; i < __n; i++) - d[i] = s[i]; - - return __dest; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ - -static void flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out = *in; - out++; - in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void error(char *x) -{ - puts("\n\n"); - puts(x); - puts("\n\n -- System halted\n"); - - while (1); /* Halt */ -} - -void setup_normal_output_buffer(void) -{ - output_data = (char *)KERNEL_LOAD_ADR; -} - -void decompress_kernel(void) -{ - char revision; - - /* input_data is set in head.S */ - inbuf = input_data; - -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - *R_SERIAL0_XOFF = 0; - *R_SERIAL0_BAUD = 0x99; - *R_SERIAL0_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - *R_SERIAL1_XOFF = 0; - *R_SERIAL1_BAUD = 0x99; - *R_SERIAL1_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - *R_GEN_CONFIG = 0x08; - *R_SERIAL2_XOFF = 0; - *R_SERIAL2_BAUD = 0x99; - *R_SERIAL2_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - *R_GEN_CONFIG = 0x100; - *R_SERIAL3_XOFF = 0; - *R_SERIAL3_BAUD = 0x99; - *R_SERIAL3_TR_CTRL = 0x40; -#endif - - setup_normal_output_buffer(); - - makecrc(); - - __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < 10) { - puts("You need an ETRAX 100LX to run linux 2.6\n"); - while (1); - } - - puts("Uncompressing Linux...\n"); - gunzip(); - puts("Done. Now booting the kernel.\n"); -} diff --git a/trunk/arch/cris/arch-v10/kernel/entry.S b/trunk/arch/cris/arch-v10/kernel/entry.S index 72f5cd319b97..2c18d08cd913 100644 --- a/trunk/arch/cris/arch-v10/kernel/entry.S +++ b/trunk/arch/cris/arch-v10/kernel/entry.S @@ -536,10 +536,10 @@ multiple_interrupt: movem $r13, [$sp] push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal frame - + move.d $sp, $r10 jsr do_multiple_IRQ - + jump ret_from_intr do_sigtrap: @@ -585,7 +585,7 @@ _ugdb_handle_breakpoint: pop $r0 ; Restore r0. ba do_sigtrap ; SIGTRAP the offending process. pop $dccr ; Restore dccr in delay slot. - + .global kernel_execve kernel_execve: move.d __NR_execve, $r9 @@ -929,6 +929,14 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* * NOTE!! This doesn't have to be exact - we just have diff --git a/trunk/arch/cris/arch-v32/boot/Makefile b/trunk/arch/cris/arch-v32/boot/Makefile deleted file mode 100644 index 99896ad60b30..000000000000 --- a/trunk/arch/cris/arch-v32/boot/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# arch/cris/arch-v32/boot/Makefile -# - -OBJCOPYFLAGS = -O binary -R .note -R .comment - -subdir- := compressed rescue -targets := Image - -$(obj)/Image: vmlinux FORCE - $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' - -$(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ - $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin - -$(obj)/zImage: $(obj)/compressed/vmlinux - @cp $< $@ - @echo ' Kernel: $@ is ready' diff --git a/trunk/arch/cris/arch-v32/boot/compressed/Makefile b/trunk/arch/cris/arch-v32/boot/compressed/Makefile deleted file mode 100644 index e176b8b69d92..000000000000 --- a/trunk/arch/cris/arch-v32/boot/compressed/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# arch/cris/arch-v32/boot/compressed/Makefile -# - -asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch -ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch -ldflags-y += -T$(srctree)/$(src)/decompress.lds -OBJECTS = $(obj)/head.o $(obj)/misc.o -OBJCOPYFLAGS = -O binary --remove-section=.bss - -quiet_cmd_image = BUILD $@ -cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ - -targets := vmlinux piggy.gz decompress.o decompress.bin - -$(obj)/decompress.o: $(OBJECTS) FORCE - $(call if_changed,ld) - -$(obj)/decompress.bin: $(obj)/decompress.o FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE - $(call if_changed,image) - -$(obj)/piggy.gz: $(obj)/../Image FORCE - $(call if_changed,gzip) diff --git a/trunk/arch/cris/arch-v32/boot/rescue/Makefile b/trunk/arch/cris/arch-v32/boot/rescue/Makefile deleted file mode 100644 index 566aac663a38..000000000000 --- a/trunk/arch/cris/arch-v32/boot/rescue/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for rescue (bootstrap) code -# - -CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) -ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \ - -I $(srctree)/include/asm/arch -asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch -LD = gcc-cris -mlinux -march=v32 -nostdlib -ldflags-y += -T $(srctree)/$(src)/rescue.lds -LDPOSTFLAGS = -lgcc -OBJCOPYFLAGS = -O binary --remove-section=.bss -obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o -OBJECT := $(obj)/head.o - -targets := rescue.o rescue.bin - -quiet_cmd_ldlibgcc = LD $@ -cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@ - -$(obj)/rescue.o: $(OBJECTS) FORCE - $(call if_changed,ldlibgcc) - -$(obj)/rescue.bin: $(obj)/rescue.o FORCE - $(call if_changed,objcopy) - cp -p $(obj)/rescue.bin $(objtree) diff --git a/trunk/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/trunk/arch/cris/arch-v32/drivers/mach-a3/gpio.c index 7a87bc0ae2e8..97357cfd17bb 100644 --- a/trunk/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/trunk/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, shadow |= ~readl(dir_oe[priv->minor]) | (arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_lock_irqrestore(&gpio_lock, flags); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_CLRBITS: spin_lock_irqsave(&gpio_lock, flags); @@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, shadow |= ~readl(dir_oe[priv->minor]) & ~(arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_lock_irqrestore(&gpio_lock, flags); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_HIGHALARM: /* Set alarm when bits with 1 in arg go high. */ diff --git a/trunk/arch/cris/arch-v32/kernel/Makefile b/trunk/arch/cris/arch-v32/kernel/Makefile index 993d987b0078..40358355d0cb 100644 --- a/trunk/arch/cris/arch-v32/kernel/Makefile +++ b/trunk/arch/cris/arch-v32/kernel/Makefile @@ -9,8 +9,6 @@ obj-y := entry.o traps.o irq.o debugport.o \ process.o ptrace.o setup.o signal.o traps.o time.o \ cache.o cacheflush.o -obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o - obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o diff --git a/trunk/arch/cris/arch-v32/kernel/entry.S b/trunk/arch/cris/arch-v32/kernel/entry.S index 5e674c8f7c51..435b9671bd4b 100644 --- a/trunk/arch/cris/arch-v32/kernel/entry.S +++ b/trunk/arch/cris/arch-v32/kernel/entry.S @@ -852,6 +852,14 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* * NOTE!! This doesn't have to be exact - we just have diff --git a/trunk/arch/cris/arch-v32/kernel/irq.c b/trunk/arch/cris/arch-v32/kernel/irq.c index df3925cb1c7f..d70b445f4a8f 100644 --- a/trunk/arch/cris/arch-v32/kernel/irq.c +++ b/trunk/arch/cris/arch-v32/kernel/irq.c @@ -325,12 +325,14 @@ static void end_crisv32_irq(unsigned int irq) { } -void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest) +int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest) { unsigned long flags; spin_lock_irqsave(&irq_lock, flags); irq_allocations[irq - FIRST_IRQ].mask = *dest; spin_unlock_irqrestore(&irq_lock, flags); + + return 0; } static struct irq_chip crisv32_irq_type = { diff --git a/trunk/arch/cris/arch-v10/boot/.gitignore b/trunk/arch/cris/boot/.gitignore similarity index 100% rename from trunk/arch/cris/arch-v10/boot/.gitignore rename to trunk/arch/cris/boot/.gitignore diff --git a/trunk/arch/cris/arch-v10/boot/Makefile b/trunk/arch/cris/boot/Makefile similarity index 65% rename from trunk/arch/cris/arch-v10/boot/Makefile rename to trunk/arch/cris/boot/Makefile index 217203014433..144f3afa0119 100644 --- a/trunk/arch/cris/arch-v10/boot/Makefile +++ b/trunk/arch/cris/boot/Makefile @@ -1,8 +1,12 @@ # -# arch/cris/arch-v10/boot/Makefile +# arch/cris/boot/Makefile # -OBJCOPYFLAGS = -O binary --remove-section=.bss +objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment +objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss + +OBJCOPYFLAGS = -O binary $(objcopyflags-y) + subdir- := compressed rescue targets := Image diff --git a/trunk/arch/cris/arch-v10/boot/compressed/Makefile b/trunk/arch/cris/boot/compressed/Makefile similarity index 50% rename from trunk/arch/cris/arch-v10/boot/compressed/Makefile rename to trunk/arch/cris/boot/compressed/Makefile index 6fe0ffaf3be6..8fe9338c1775 100644 --- a/trunk/arch/cris/arch-v10/boot/compressed/Makefile +++ b/trunk/arch/cris/boot/compressed/Makefile @@ -1,11 +1,23 @@ # -# arch/cris/arch-v10/boot/compressed/Makefile +# arch/cris/boot/compressed/Makefile # asflags-y += $(LINUXINCLUDE) ccflags-y += -O2 $(LINUXINCLUDE) -ldflags-y += -T $(srctree)/$(src)/decompress.lds -OBJECTS = $(obj)/head.o $(obj)/misc.o + +# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \ +# -I$(srctree)/include/asm/arch +# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach +# -I$(srctree)/include/asm/arch + +arch-$(CONFIG_ETRAX_ARCH_V10) = v10 +arch-$(CONFIG_ETRAX_ARCH_V32) = v32 + +ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds + +OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o +OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o +OBJECTS= $(OBJECTS-y) $(obj)/misc.o OBJCOPYFLAGS = -O binary --remove-section=.bss quiet_cmd_image = BUILD $@ @@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE $(obj)/piggy.gz: $(obj)/../Image FORCE $(call if_changed,gzip) - diff --git a/trunk/arch/cris/arch-v32/boot/compressed/README b/trunk/arch/cris/boot/compressed/README similarity index 100% rename from trunk/arch/cris/arch-v32/boot/compressed/README rename to trunk/arch/cris/boot/compressed/README diff --git a/trunk/arch/cris/arch-v10/boot/compressed/decompress.lds b/trunk/arch/cris/boot/compressed/decompress_v10.lds similarity index 100% rename from trunk/arch/cris/arch-v10/boot/compressed/decompress.lds rename to trunk/arch/cris/boot/compressed/decompress_v10.lds diff --git a/trunk/arch/cris/arch-v32/boot/compressed/decompress.lds b/trunk/arch/cris/boot/compressed/decompress_v32.lds similarity index 100% rename from trunk/arch/cris/arch-v32/boot/compressed/decompress.lds rename to trunk/arch/cris/boot/compressed/decompress_v32.lds diff --git a/trunk/arch/cris/arch-v10/boot/compressed/head.S b/trunk/arch/cris/boot/compressed/head_v10.S similarity index 97% rename from trunk/arch/cris/arch-v10/boot/compressed/head.S rename to trunk/arch/cris/boot/compressed/head_v10.S index 0bb4dcc29254..9edb8ade7e1f 100644 --- a/trunk/arch/cris/arch-v10/boot/compressed/head.S +++ b/trunk/arch/cris/boot/compressed/head_v10.S @@ -30,7 +30,7 @@ beq dram_init_finished nop -#include "../../lib/dram_init.S" +#include "../../arch-v10/lib/dram_init.S" dram_init_finished: @@ -123,4 +123,4 @@ _cmd_line_magic: .dword 0 _cmd_line_addr: .dword 0 -#include "../../lib/hw_settings.S" +#include "../../arch-v10/lib/hw_settings.S" diff --git a/trunk/arch/cris/arch-v32/boot/compressed/head.S b/trunk/arch/cris/boot/compressed/head_v32.S similarity index 94% rename from trunk/arch/cris/arch-v32/boot/compressed/head.S rename to trunk/arch/cris/boot/compressed/head_v32.S index a4a65c5c669e..f483005f3d48 100644 --- a/trunk/arch/cris/arch-v32/boot/compressed/head.S +++ b/trunk/arch/cris/boot/compressed/head_v32.S @@ -17,7 +17,7 @@ .globl input_data .text -_start: +start: di ;; Start clocks for used blocks. @@ -29,9 +29,9 @@ _start: nop #if defined CONFIG_ETRAXFS -#include "../../mach-fs/dram_init.S" +#include "../../arch-v32/mach-fs/dram_init.S" #elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../mach-a3/dram_init.S" +#include "../../arch-v32/mach-a3/dram_init.S" #else #error Only ETRAXFS and ARTPEC-3 supported! #endif @@ -137,9 +137,9 @@ _boot_source: .dword 0 #if defined CONFIG_ETRAXFS -#include "../../mach-fs/hw_settings.S" +#include "../../arch-v32/mach-fs/hw_settings.S" #elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../mach-a3/hw_settings.S" +#include "../../arch-v32/mach-a3/hw_settings.S" #else #error Only ETRAXFS and ARTPEC-3 supported! #endif diff --git a/trunk/arch/cris/arch-v32/boot/compressed/misc.c b/trunk/arch/cris/boot/compressed/misc.c similarity index 65% rename from trunk/arch/cris/arch-v32/boot/compressed/misc.c rename to trunk/arch/cris/boot/compressed/misc.c index 3595e16e82bc..47bc190ba6d4 100644 --- a/trunk/arch/cris/arch-v32/boot/compressed/misc.c +++ b/trunk/arch/cris/boot/compressed/misc.c @@ -18,8 +18,9 @@ #define KERNEL_LOAD_ADR 0x40004000 - #include + +#ifdef CONFIG_ETRAX_ARCH_V32 #include #include #include @@ -27,6 +28,9 @@ #ifdef CONFIG_CRIS_MACH_ARTPEC3 #include #endif +#else +#include +#endif /* * gzip declarations @@ -35,12 +39,10 @@ #define OF(args) args #define STATIC static -void* memset(void* s, int c, size_t n); -void* memcpy(void* __dest, __const void* __src, - size_t __n); - -#define memzero(s, n) memset ((s), 0, (n)) +void *memset(void *s, int c, size_t n); +void *memcpy(void *__dest, __const void *__src, size_t __n); +#define memzero(s, n) memset((s), 0, (n)) typedef unsigned char uch; typedef unsigned short ush; @@ -68,27 +70,43 @@ static unsigned outcnt = 0; /* bytes in output buffer */ #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ #define RESERVED 0xC0 /* bit 6,7: reserved */ -#define get_byte() inbuf[inptr++] +#define get_byte() (inbuf[inptr++]) /* Diagnostic functions */ #ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Assert(cond, msg) do { \ + if (!(cond)) \ + error(msg); \ + } while (0) # define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +# define Tracev(x) do { \ + if (verbose) \ + fprintf x; \ + } while (0) +# define Tracevv(x) do { \ + if (verbose > 1) \ + fprintf x; \ + } while (0) +# define Tracec(c, x) do { \ + if (verbose && (c)) \ + fprintf x; \ + } while (0) +# define Tracecv(c, x) do { \ + if (verbose > 1 && (c)) \ + fprintf x; \ + } while (0) #else -# define Assert(cond,msg) +# define Assert(cond, msg) # define Trace(x) # define Tracev(x) # define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) +# define Tracec(c, x) +# define Tracecv(c, x) #endif static void flush_window(void); static void error(char *m); +static void puts(const char *); extern char *input_data; /* lives in head.S */ @@ -96,10 +114,6 @@ static long bytes_out; static uch *output_data; static unsigned long output_ptr; -static void error(char *m); - -static void puts(const char *); - /* the "heap" is put directly after the BSS ends, at end */ extern int _end; @@ -110,8 +124,8 @@ static long free_mem_end_ptr; /* decompressor info and error messages to serial console */ -static inline void -serout(const char *s, reg_scope_instances regi_ser) +#ifdef CONFIG_ETRAX_ARCH_V32 +static inline void serout(const char *s, reg_scope_instances regi_ser) { reg_ser_rs_stat_din rs; reg_ser_rw_dout dout = {.data = *s}; @@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser) REG_WR(ser, regi_ser, rw_dout, dout); } +#endif -static void -puts(const char *s) +static void puts(const char *s) { #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL while (*s) { #ifdef CONFIG_ETRAX_DEBUG_PORT0 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser0); +#else + while (!(*R_SERIAL0_STATUS & (1 << 5))) + ; + *R_SERIAL0_TR_DATA = *s++; +#endif #endif #ifdef CONFIG_ETRAX_DEBUG_PORT1 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser1); +#else + while (!(*R_SERIAL1_STATUS & (1 << 5))) + ; + *R_SERIAL1_TR_DATA = *s++; +#endif #endif #ifdef CONFIG_ETRAX_DEBUG_PORT2 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser2); +#else + while (!(*R_SERIAL2_STATUS & (1 << 5))) + ; + *R_SERIAL2_TR_DATA = *s++; +#endif #endif #ifdef CONFIG_ETRAX_DEBUG_PORT3 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser3); +#else + while (!(*R_SERIAL3_STATUS & (1 << 5))) + ; + *R_SERIAL3_TR_DATA = *s++; +#endif #endif *s++; } @@ -147,8 +185,7 @@ puts(const char *s) #endif } -void* -memset(void* s, int c, size_t n) +void *memset(void *s, int c, size_t n) { int i; char *ss = (char*)s; @@ -158,14 +195,13 @@ memset(void* s, int c, size_t n) return s; } -void* -memcpy(void* __dest, __const void* __src, - size_t __n) +void *memcpy(void *__dest, __const void *__src, size_t __n) { int i; char *d = (char *)__dest, *s = (char *)__src; - for (i=0;i<__n;i++) d[i] = s[i]; + for (i = 0; i < __n; i++) + d[i] = s[i]; return __dest; } @@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src, * (Used for the decompressed data only.) */ -static void -flush_window() +static void flush_window(void) { - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; + + in = window; + out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out = *in; + out++; + in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; } -static void -error(char *x) +static void error(char *x) { - puts("\r\n\n"); + puts("\n\n"); puts(x); - puts("\r\n\n -- System halted\n"); + puts("\n\n -- System halted\n"); while(1); /* Halt */ } -void -setup_normal_output_buffer(void) +void setup_normal_output_buffer(void) { output_data = (char *)KERNEL_LOAD_ADR; } -static inline void -serial_setup(reg_scope_instances regi_ser) +#ifdef CONFIG_ETRAX_ARCH_V32 +static inline void serial_setup(reg_scope_instances regi_ser) { reg_ser_rw_xoff xoff; reg_ser_rw_tr_ctrl tr_ctrl; @@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser) REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud); } +#endif -void -decompress_kernel(void) +void decompress_kernel(void) { char revision; + char compile_rev; +#ifdef CONFIG_ETRAX_ARCH_V32 + /* Need at least a CRISv32 to run. */ + compile_rev = 32; #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ defined(CONFIG_ETRAX_DEBUG_PORT2) || \ defined(CONFIG_ETRAX_DEBUG_PORT3) @@ -277,6 +316,7 @@ decompress_kernel(void) hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); #endif + #ifdef CONFIG_ETRAX_DEBUG_PORT0 serial_setup(regi_ser0); #endif @@ -300,19 +340,52 @@ decompress_kernel(void) /* input_data is set in head.S */ inbuf = input_data; +#else /* CRISv10 */ + /* Need at least a crisv10 to run. */ + compile_rev = 10; + + /* input_data is set in head.S */ + inbuf = input_data; + +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + *R_SERIAL0_XOFF = 0; + *R_SERIAL0_BAUD = 0x99; + *R_SERIAL0_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT1 + *R_SERIAL1_XOFF = 0; + *R_SERIAL1_BAUD = 0x99; + *R_SERIAL1_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT2 + *R_GEN_CONFIG = 0x08; + *R_SERIAL2_XOFF = 0; + *R_SERIAL2_BAUD = 0x99; + *R_SERIAL2_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT3 + *R_GEN_CONFIG = 0x100; + *R_SERIAL3_XOFF = 0; + *R_SERIAL3_BAUD = 0x99; + *R_SERIAL3_TR_CTRL = 0x40; +#endif +#endif setup_normal_output_buffer(); makecrc(); __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < 32) - { - puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); + if (revision < compile_rev) { +#ifdef CONFIG_ETRAX_ARCH_V32 + puts("You need an ETRAX FS to run Linux 2.6/crisv32\n"); +#else + puts("You need an ETRAX 100LX to run linux 2.6\n"); +#endif while(1); } - puts("Uncompressing Linux...\r\n"); + puts("Uncompressing Linux...\n"); gunzip(); - puts("Done. Now booting the kernel.\r\n"); + puts("Done. Now booting the kernel\n"); } diff --git a/trunk/arch/cris/arch-v10/boot/rescue/Makefile b/trunk/arch/cris/boot/rescue/Makefile similarity index 63% rename from trunk/arch/cris/arch-v10/boot/rescue/Makefile rename to trunk/arch/cris/boot/rescue/Makefile index 82ab59b968e5..52bd0bd1dd22 100644 --- a/trunk/arch/cris/arch-v10/boot/rescue/Makefile +++ b/trunk/arch/cris/boot/rescue/Makefile @@ -2,16 +2,26 @@ # Makefile for rescue (bootstrap) code # -ccflags-y += -O2 $(LINUXINCLUDE) +# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) +# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \ +# -I$(srctree)/include/asm/arch +# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch +# LD = gcc-cris -mlinux -march=v32 -nostdlib + asflags-y += $(LINUXINCLUDE) -ldflags-y += -T $(srctree)/$(src)/rescue.lds +ccflags-y += -O2 $(LINUXINCLUDE) +arch-$(CONFIG_ETRAX_ARCH_V10) = v10 +arch-$(CONFIG_ETRAX_ARCH_V32) = v32 + +ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds OBJCOPYFLAGS = -O binary --remove-section=.bss -obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o -OBJECT := $(obj)/head.o +obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o +obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o +OBJECTS := $(obj-y) targets := rescue.o rescue.bin -$(obj)/rescue.o: $(OBJECT) FORCE +$(obj)/rescue.o: $(OBJECTS) FORCE $(call if_changed,ld) $(obj)/rescue.bin: $(obj)/rescue.o FORCE @@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784 rm tr.bin tmp2423 testrescue_tmp.bin + $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin # Pad it to 784 bytes, that's what the rescue loader expects @@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o cat ktr.bin tmp2423 >kimagerescue_tmp.bin dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784 rm ktr.bin tmp2423 kimagerescue_tmp.bin + diff --git a/trunk/arch/cris/arch-v10/boot/rescue/head.S b/trunk/arch/cris/boot/rescue/head_v10.S similarity index 99% rename from trunk/arch/cris/arch-v10/boot/rescue/head.S rename to trunk/arch/cris/boot/rescue/head_v10.S index fb503d1eeea4..2fafe247a25b 100644 --- a/trunk/arch/cris/arch-v10/boot/rescue/head.S +++ b/trunk/arch/cris/boot/rescue/head_v10.S @@ -155,7 +155,7 @@ no_newjump: #endif ;; We need to setup the bus registers before we start using the DRAM -#include "../../lib/dram_init.S" +#include "../../../arch-v10/lib/dram_init.S" ;; we now should go through the checksum-table and check the listed ;; partitions for errors. diff --git a/trunk/arch/cris/arch-v32/boot/rescue/head.S b/trunk/arch/cris/boot/rescue/head_v32.S similarity index 100% rename from trunk/arch/cris/arch-v32/boot/rescue/head.S rename to trunk/arch/cris/boot/rescue/head_v32.S diff --git a/trunk/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/trunk/arch/cris/boot/rescue/kimagerescue.S similarity index 100% rename from trunk/arch/cris/arch-v10/boot/rescue/kimagerescue.S rename to trunk/arch/cris/boot/rescue/kimagerescue.S diff --git a/trunk/arch/cris/arch-v10/boot/rescue/rescue.lds b/trunk/arch/cris/boot/rescue/rescue_v10.lds similarity index 100% rename from trunk/arch/cris/arch-v10/boot/rescue/rescue.lds rename to trunk/arch/cris/boot/rescue/rescue_v10.lds diff --git a/trunk/arch/cris/arch-v32/boot/rescue/rescue.lds b/trunk/arch/cris/boot/rescue/rescue_v32.lds similarity index 100% rename from trunk/arch/cris/arch-v32/boot/rescue/rescue.lds rename to trunk/arch/cris/boot/rescue/rescue_v32.lds diff --git a/trunk/arch/cris/arch-v10/boot/rescue/testrescue.S b/trunk/arch/cris/boot/rescue/testrescue.S similarity index 100% rename from trunk/arch/cris/arch-v10/boot/rescue/testrescue.S rename to trunk/arch/cris/boot/rescue/testrescue.S diff --git a/trunk/arch/cris/arch-v10/boot/tools/build.c b/trunk/arch/cris/boot/tools/build.c similarity index 100% rename from trunk/arch/cris/arch-v10/boot/tools/build.c rename to trunk/arch/cris/boot/tools/build.c diff --git a/trunk/arch/cris/include/asm/unistd.h b/trunk/arch/cris/include/asm/unistd.h index 235d076379d5..c17079388bb9 100644 --- a/trunk/arch/cris/include/asm/unistd.h +++ b/trunk/arch/cris/include/asm/unistd.h @@ -281,7 +281,7 @@ #define __NR_mbind 274 #define __NR_get_mempolicy 275 #define __NR_set_mempolicy 276 -#define __NR_mq_open 277 +#define __NR_mq_open 277 #define __NR_mq_unlink (__NR_mq_open+1) #define __NR_mq_timedsend (__NR_mq_open+2) #define __NR_mq_timedreceive (__NR_mq_open+3) @@ -331,10 +331,18 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 #ifdef __KERNEL__ -#define NR_syscalls 327 +#define NR_syscalls 335 #include diff --git a/trunk/arch/cris/kernel/module.c b/trunk/arch/cris/kernel/module.c index a187833febc8..abc13e368b90 100644 --- a/trunk/arch/cris/kernel/module.c +++ b/trunk/arch/cris/kernel/module.c @@ -48,8 +48,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { FREE_MODULE(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } /* We don't need anything special. */ diff --git a/trunk/arch/frv/Kconfig b/trunk/arch/frv/Kconfig index 9d1552a9ee2c..8a5bd7a9c6f5 100644 --- a/trunk/arch/frv/Kconfig +++ b/trunk/arch/frv/Kconfig @@ -6,6 +6,7 @@ config FRV bool default y select HAVE_IDE + select HAVE_ARCH_TRACEHOOK config ZONE_DMA bool diff --git a/trunk/arch/frv/include/asm/bitops.h b/trunk/arch/frv/include/asm/bitops.h index 287f6f697ce2..50ae91b29674 100644 --- a/trunk/arch/frv/include/asm/bitops.h +++ b/trunk/arch/frv/include/asm/bitops.h @@ -112,7 +112,7 @@ extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsig #define atomic_clear_mask(mask, v) atomic_test_and_ANDNOT_mask((mask), (v)) #define atomic_set_mask(mask, v) atomic_test_and_OR_mask((mask), (v)) -static inline int test_and_clear_bit(int nr, volatile void *addr) +static inline int test_and_clear_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *ptr = addr; unsigned long mask = 1UL << (nr & 31); @@ -120,7 +120,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr) return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0; } -static inline int test_and_set_bit(int nr, volatile void *addr) +static inline int test_and_set_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *ptr = addr; unsigned long mask = 1UL << (nr & 31); @@ -128,7 +128,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr) return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0; } -static inline int test_and_change_bit(int nr, volatile void *addr) +static inline int test_and_change_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *ptr = addr; unsigned long mask = 1UL << (nr & 31); @@ -136,22 +136,22 @@ static inline int test_and_change_bit(int nr, volatile void *addr) return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0; } -static inline void clear_bit(int nr, volatile void *addr) +static inline void clear_bit(unsigned long nr, volatile void *addr) { test_and_clear_bit(nr, addr); } -static inline void set_bit(int nr, volatile void *addr) +static inline void set_bit(unsigned long nr, volatile void *addr) { test_and_set_bit(nr, addr); } -static inline void change_bit(int nr, volatile void * addr) +static inline void change_bit(unsigned long nr, volatile void *addr) { test_and_change_bit(nr, addr); } -static inline void __clear_bit(int nr, volatile void * addr) +static inline void __clear_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *a = addr; int mask; @@ -161,7 +161,7 @@ static inline void __clear_bit(int nr, volatile void * addr) *a &= ~mask; } -static inline void __set_bit(int nr, volatile void * addr) +static inline void __set_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *a = addr; int mask; @@ -171,7 +171,7 @@ static inline void __set_bit(int nr, volatile void * addr) *a |= mask; } -static inline void __change_bit(int nr, volatile void *addr) +static inline void __change_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *a = addr; int mask; @@ -181,7 +181,7 @@ static inline void __change_bit(int nr, volatile void *addr) *a ^= mask; } -static inline int __test_and_clear_bit(int nr, volatile void * addr) +static inline int __test_and_clear_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *a = addr; int mask, retval; @@ -193,7 +193,7 @@ static inline int __test_and_clear_bit(int nr, volatile void * addr) return retval; } -static inline int __test_and_set_bit(int nr, volatile void * addr) +static inline int __test_and_set_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *a = addr; int mask, retval; @@ -205,7 +205,7 @@ static inline int __test_and_set_bit(int nr, volatile void * addr) return retval; } -static inline int __test_and_change_bit(int nr, volatile void * addr) +static inline int __test_and_change_bit(unsigned long nr, volatile void *addr) { volatile unsigned long *a = addr; int mask, retval; @@ -220,12 +220,13 @@ static inline int __test_and_change_bit(int nr, volatile void * addr) /* * This routine doesn't need to be atomic. */ -static inline int __constant_test_bit(int nr, const volatile void * addr) +static inline int +__constant_test_bit(unsigned long nr, const volatile void *addr) { return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; } -static inline int __test_bit(int nr, const volatile void * addr) +static inline int __test_bit(unsigned long nr, const volatile void *addr) { int * a = (int *) addr; int mask; diff --git a/trunk/arch/frv/include/asm/bug.h b/trunk/arch/frv/include/asm/bug.h index 6b1b44d71028..2e054508a2f6 100644 --- a/trunk/arch/frv/include/asm/bug.h +++ b/trunk/arch/frv/include/asm/bug.h @@ -30,7 +30,7 @@ extern void __debug_bug_printk(const char *file, unsigned line); do { \ __debug_bug_trap(signr); \ asm volatile("nop"); \ -} while(0) +} while(1) #define HAVE_ARCH_BUG #define BUG() \ @@ -46,7 +46,8 @@ do { \ #define HAVE_ARCH_KGDB_BAD_PAGE #define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0) #endif -#endif + +#endif /* CONFIG_BUG */ #include diff --git a/trunk/arch/frv/include/asm/elf.h b/trunk/arch/frv/include/asm/elf.h index 7279ec07d62e..7bbf6e47f8c8 100644 --- a/trunk/arch/frv/include/asm/elf.h +++ b/trunk/arch/frv/include/asm/elf.h @@ -116,6 +116,7 @@ do { \ } while(0) #define USE_ELF_CORE_DUMP +#define CORE_DUMP_USE_REGSET #define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC #define ELF_EXEC_PAGESIZE 16384 diff --git a/trunk/arch/frv/include/asm/init.h b/trunk/arch/frv/include/asm/init.h deleted file mode 100644 index 8b15838de216..000000000000 --- a/trunk/arch/frv/include/asm/init.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_INIT_H -#define _ASM_INIT_H - -#define __init __attribute__ ((__section__ (".text.init"))) -#define __initdata __attribute__ ((__section__ (".data.init"))) -/* For assembly routines */ -#define __INIT .section ".text.init",#alloc,#execinstr -#define __FINIT .previous -#define __INITDATA .section ".data.init",#alloc,#write - -#endif - diff --git a/trunk/arch/frv/include/asm/pci.h b/trunk/arch/frv/include/asm/pci.h index 585d9b49949a..cc685e60b0f9 100644 --- a/trunk/arch/frv/include/asm/pci.h +++ b/trunk/arch/frv/include/asm/pci.h @@ -87,8 +87,7 @@ static inline void pci_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction) { - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle), (unsigned long)bus_to_virt(dma_handle) + size); @@ -105,9 +104,7 @@ static inline void pci_dma_sync_sg(struct pci_dev *hwdev, int nelems, int direction) { int i; - - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); for (i = 0; i < nelems; i++) frv_cache_wback_inv(sg_dma_address(&sg[i]), diff --git a/trunk/arch/frv/include/asm/ptrace.h b/trunk/arch/frv/include/asm/ptrace.h index cf6934012b64..a54b535c9e49 100644 --- a/trunk/arch/frv/include/asm/ptrace.h +++ b/trunk/arch/frv/include/asm/ptrace.h @@ -65,6 +65,8 @@ #ifdef __KERNEL__ #ifndef __ASSEMBLY__ +struct task_struct; + /* * we dedicate GR28 to keeping a pointer to the current exception frame * - gr28 is destroyed on entry to the kernel from userspace @@ -73,11 +75,18 @@ register struct pt_regs *__frame asm("gr28"); #define user_mode(regs) (!((regs)->psr & PSR_S)) #define instruction_pointer(regs) ((regs)->pc) +#define user_stack_pointer(regs) ((regs)->sp) extern unsigned long user_stack(const struct pt_regs *); extern void show_regs(struct pt_regs *); #define profile_pc(regs) ((regs)->pc) -#endif + +#define task_pt_regs(task) ((task)->thread.frame0) + +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); #endif /* !__ASSEMBLY__ */ +#endif /* __KERNEL__ */ #endif /* _ASM_PTRACE_H */ diff --git a/trunk/arch/frv/include/asm/syscall.h b/trunk/arch/frv/include/asm/syscall.h new file mode 100644 index 000000000000..70689eb29b98 --- /dev/null +++ b/trunk/arch/frv/include/asm/syscall.h @@ -0,0 +1,123 @@ +/* syscall parameter access functions + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H + +#include +#include + +/* + * Get the system call number or -1 + */ +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->syscallno; +} + +/* + * Restore the clobbered GR8 register + * (1st syscall arg was overwritten with syscall return or error) + */ +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + regs->gr8 = regs->orig_gr8; +} + +/* + * See if the syscall return value is an error, returning it if it is and 0 if + * not + */ +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + return IS_ERR_VALUE(regs->gr8) ? regs->gr8 : 0; +} + +/* + * Get the syscall return value + */ +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->gr8; +} + +/* + * Set the syscall return value + */ +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (error) + regs->gr8 = -error; + else + regs->gr8 = val; +} + +/* + * Retrieve the system call arguments + */ +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + /* + * Do this simply for now. If we need to start supporting + * fetching arguments from arbitrary indices, this will need some + * extra logic. Presently there are no in-tree users that depend + * on this behaviour. + */ + BUG_ON(i); + + /* Argument pattern is: GR8, GR9, GR10, GR11, GR12, GR13 */ + switch (n) { + case 6: args[5] = regs->gr13; + case 5: args[4] = regs->gr12; + case 4: args[3] = regs->gr11; + case 3: args[2] = regs->gr10; + case 2: args[1] = regs->gr9; + case 1: args[0] = regs->gr8; + break; + default: + BUG(); + } +} + +/* + * Alter the system call arguments + */ +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + /* Same note as above applies */ + BUG_ON(i); + + switch (n) { + case 6: regs->gr13 = args[5]; + case 5: regs->gr12 = args[4]; + case 4: regs->gr11 = args[3]; + case 3: regs->gr10 = args[2]; + case 2: regs->gr9 = args[1]; + case 1: regs->gr8 = args[0]; + break; + default: + BUG(); + } +} + +#endif /* _ASM_SYSCALL_H */ diff --git a/trunk/arch/frv/include/asm/thread_info.h b/trunk/arch/frv/include/asm/thread_info.h index bb53ab753ffb..e8a5ed7be021 100644 --- a/trunk/arch/frv/include/asm/thread_info.h +++ b/trunk/arch/frv/include/asm/thread_info.h @@ -109,20 +109,20 @@ register struct thread_info *__current_thread_info asm("gr15"); * - other flags in MSW */ #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ -#define TIF_IRET 4 /* return with iret */ +#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 17 /* OOM killer killed process */ #define TIF_FREEZE 18 /* freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1 << TIF_FREEZE) diff --git a/trunk/arch/frv/include/asm/unistd.h b/trunk/arch/frv/include/asm/unistd.h index edcfaf5f0414..96d78d5d2c41 100644 --- a/trunk/arch/frv/include/asm/unistd.h +++ b/trunk/arch/frv/include/asm/unistd.h @@ -339,10 +339,12 @@ #define __NR_dup3 330 #define __NR_pipe2 331 #define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 #ifdef __KERNEL__ -#define NR_syscalls 333 +#define NR_syscalls 335 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/trunk/arch/frv/kernel/entry.S b/trunk/arch/frv/kernel/entry.S index 99060ab507ee..356e0e327a89 100644 --- a/trunk/arch/frv/kernel/entry.S +++ b/trunk/arch/frv/kernel/entry.S @@ -886,7 +886,6 @@ system_call: bnc icc0,#0,__syscall_badsys ldi @(gr15,#TI_FLAGS),gr4 - ori gr4,#_TIF_SYSCALL_TRACE,gr4 andicc gr4,#_TIF_SYSCALL_TRACE,gr0,icc0 bne icc0,#0,__syscall_trace_entry @@ -1150,11 +1149,10 @@ __entry_work_notifysig: # perform syscall entry tracing __syscall_trace_entry: LEDS 0x6320 - setlos.p #0,gr8 - call do_syscall_trace + call syscall_trace_entry - ldi @(gr28,#REG_SYSCALLNO),gr7 - lddi @(gr28,#REG_GR(8)) ,gr8 + lddi.p @(gr28,#REG_GR(8)) ,gr8 + ori gr8,#0,gr7 ; syscall_trace_entry() returned new syscallno lddi @(gr28,#REG_GR(10)),gr10 lddi.p @(gr28,#REG_GR(12)),gr12 @@ -1169,11 +1167,10 @@ __syscall_exit_work: beq icc0,#1,__entry_work_pending movsg psr,gr23 - andi gr23,#~PSR_PIL,gr23 ; could let do_syscall_trace() call schedule() + andi gr23,#~PSR_PIL,gr23 ; could let syscall_trace_exit() call schedule() movgs gr23,psr - setlos.p #1,gr8 - call do_syscall_trace + call syscall_trace_exit bra __entry_resume_userspace __syscall_badsys: @@ -1525,5 +1522,7 @@ sys_call_table: .long sys_dup3 /* 330 */ .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev syscall_table_size = (. - sys_call_table) diff --git a/trunk/arch/frv/kernel/head-mmu-fr451.S b/trunk/arch/frv/kernel/head-mmu-fr451.S index c8f210d84ff5..98f87d586e59 100644 --- a/trunk/arch/frv/kernel/head-mmu-fr451.S +++ b/trunk/arch/frv/kernel/head-mmu-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -31,7 +32,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/trunk/arch/frv/kernel/head-uc-fr401.S b/trunk/arch/frv/kernel/head-uc-fr401.S index ee282be20fff..438643cfa38e 100644 --- a/trunk/arch/frv/kernel/head-uc-fr401.S +++ b/trunk/arch/frv/kernel/head-uc-fr401.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/trunk/arch/frv/kernel/head-uc-fr451.S b/trunk/arch/frv/kernel/head-uc-fr451.S index b10d9c8295d2..b2a76c4a1786 100644 --- a/trunk/arch/frv/kernel/head-uc-fr451.S +++ b/trunk/arch/frv/kernel/head-uc-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/trunk/arch/frv/kernel/head-uc-fr555.S b/trunk/arch/frv/kernel/head-uc-fr555.S index 39937c19b460..5497aaf34f77 100644 --- a/trunk/arch/frv/kernel/head-uc-fr555.S +++ b/trunk/arch/frv/kernel/head-uc-fr555.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -29,7 +30,7 @@ #define __551_LCR 0xfeff1100 #define __551_LSBR 0xfeff1c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/trunk/arch/frv/kernel/head.S b/trunk/arch/frv/kernel/head.S index fecf751c5cae..b825ef3f2d54 100644 --- a/trunk/arch/frv/kernel/head.S +++ b/trunk/arch/frv/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -27,7 +28,7 @@ # command line string # ############################################################################### - .section .text.head,"ax" + __HEAD .balign 4 .globl _boot, __head_reference diff --git a/trunk/arch/frv/kernel/module.c b/trunk/arch/frv/kernel/module.c index 850d168f69fc..711763c8a6f3 100644 --- a/trunk/arch/frv/kernel/module.c +++ b/trunk/arch/frv/kernel/module.c @@ -35,8 +35,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } /* We don't need anything special. */ diff --git a/trunk/arch/frv/kernel/ptrace.c b/trunk/arch/frv/kernel/ptrace.c index 5e7d401d21e7..60eeed3694c0 100644 --- a/trunk/arch/frv/kernel/ptrace.c +++ b/trunk/arch/frv/kernel/ptrace.c @@ -19,6 +19,9 @@ #include #include #include +#include +#include +#include #include #include @@ -32,6 +35,169 @@ * in exit.c or in signal.c. */ +/* + * retrieve the contents of FRV userspace general registers + */ +static int genregs_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + const struct user_int_regs *iregs = &target->thread.user->i; + int ret; + + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + iregs, 0, sizeof(*iregs)); + if (ret < 0) + return ret; + + return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, + sizeof(*iregs), -1); +} + +/* + * update the contents of the FRV userspace general registers + */ +static int genregs_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct user_int_regs *iregs = &target->thread.user->i; + unsigned int offs_gr0, offs_gr1; + int ret; + + /* not allowed to set PSR or __status */ + if (pos < offsetof(struct user_int_regs, psr) + sizeof(long) && + pos + count > offsetof(struct user_int_regs, psr)) + return -EIO; + + if (pos < offsetof(struct user_int_regs, __status) + sizeof(long) && + pos + count > offsetof(struct user_int_regs, __status)) + return -EIO; + + /* set the control regs */ + offs_gr0 = offsetof(struct user_int_regs, gr[0]); + offs_gr1 = offsetof(struct user_int_regs, gr[1]); + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + iregs, 0, offs_gr0); + if (ret < 0) + return ret; + + /* skip GR0/TBR */ + ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + offs_gr0, offs_gr1); + if (ret < 0) + return ret; + + /* set the general regs */ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &iregs->gr[1], offs_gr1, sizeof(*iregs)); + if (ret < 0) + return ret; + + return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + sizeof(*iregs), -1); +} + +/* + * retrieve the contents of FRV userspace FP/Media registers + */ +static int fpmregs_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + const struct user_fpmedia_regs *fpregs = &target->thread.user->f; + int ret; + + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + fpregs, 0, sizeof(*fpregs)); + if (ret < 0) + return ret; + + return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, + sizeof(*fpregs), -1); +} + +/* + * update the contents of the FRV userspace FP/Media registers + */ +static int fpmregs_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct user_fpmedia_regs *fpregs = &target->thread.user->f; + int ret; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + fpregs, 0, sizeof(*fpregs)); + if (ret < 0) + return ret; + + return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + sizeof(*fpregs), -1); +} + +/* + * determine if the FP/Media registers have actually been used + */ +static int fpmregs_active(struct task_struct *target, + const struct user_regset *regset) +{ + return tsk_used_math(target) ? regset->n : 0; +} + +/* + * Define the register sets available on the FRV under Linux + */ +enum frv_regset { + REGSET_GENERAL, + REGSET_FPMEDIA, +}; + +static const struct user_regset frv_regsets[] = { + /* + * General register format is: + * PSR, ISR, CCR, CCCR, LR, LCR, PC, (STATUS), SYSCALLNO, ORIG_G8 + * GNER0-1, IACC0, TBR, GR1-63 + */ + [REGSET_GENERAL] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(long), + .align = sizeof(long), + .get = genregs_get, + .set = genregs_set, + }, + /* + * FPU/Media register format is: + * FR0-63, FNER0-1, MSR0-1, ACC0-7, ACCG0-8, FSR + */ + [REGSET_FPMEDIA] = { + .core_note_type = NT_PRFPREG, + .n = sizeof(struct user_fpmedia_regs) / sizeof(long), + .size = sizeof(long), + .align = sizeof(long), + .get = fpmregs_get, + .set = fpmregs_set, + .active = fpmregs_active, + }, +}; + +static const struct user_regset_view user_frv_native_view = { + .name = "frv", + .e_machine = EM_FRV, + .regsets = frv_regsets, + .n = ARRAY_SIZE(frv_regsets), +}; + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ + return &user_frv_native_view; +} + /* * Get contents of register REGNO in task TASK. */ @@ -68,41 +234,24 @@ static inline int put_reg(struct task_struct *task, int regno, } } -/* - * check that an address falls within the bounds of the target process's memory - * mappings - */ -static inline int is_user_addr_valid(struct task_struct *child, - unsigned long start, unsigned long len) -{ -#ifdef CONFIG_MMU - if (start >= PAGE_OFFSET || len > PAGE_OFFSET - start) - return -EIO; - return 0; -#else - struct vm_area_struct *vma; - - vma = find_vma(child->mm, start); - if (vma && start >= vma->vm_start && start + len <= vma->vm_end) - return 0; - - return -EIO; -#endif -} - /* * Called by kernel/ptrace.c when detaching.. * * Control h/w single stepping */ -void ptrace_disable(struct task_struct *child) +void user_enable_single_step(struct task_struct *child) +{ + child->thread.frame0->__status |= REG__STATUS_STEP; +} + +void user_disable_single_step(struct task_struct *child) { child->thread.frame0->__status &= ~REG__STATUS_STEP; } -void ptrace_enable(struct task_struct *child) +void ptrace_disable(struct task_struct *child) { - child->thread.frame0->__status |= REG__STATUS_STEP; + user_disable_single_step(child); } long arch_ptrace(struct task_struct *child, long request, long addr, long data) @@ -111,15 +260,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) int ret; switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = -EIO; - if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0) - break; - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { tmp = 0; @@ -163,15 +303,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = -EIO; - if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0) - break; - ret = generic_ptrace_pokedata(child, addr, data); - break; - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ ret = -EIO; if ((addr & 3) || addr < 0) @@ -179,7 +310,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = 0; switch (addr >> 2) { - case 0 ... PT__END-1: + case 0 ... PT__END - 1: ret = put_reg(child, addr >> 2, data); break; @@ -189,95 +320,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - ptrace_disable(child); - wake_up_process(child); - ret = 0; - break; - - /* make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - clear_tsk_thread_flag(child, TIF_SINGLESTEP); - ptrace_disable(child); - wake_up_process(child); - break; - - case PTRACE_SINGLESTEP: /* set the trap flag. */ - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - ptrace_enable(child); - child->exit_code = data; - wake_up_process(child); - ret = 0; - break; - - case PTRACE_DETACH: /* detach a process that was attached. */ - ret = ptrace_detach(child, data); - break; - - case PTRACE_GETREGS: { /* Get all integer regs from the child. */ - int i; - for (i = 0; i < PT__GPEND; i++) { - tmp = get_reg(child, i); - if (put_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; - break; - } - data += sizeof(long); - } - ret = 0; - break; - } - - case PTRACE_SETREGS: { /* Set all integer regs in the child. */ - int i; - for (i = 0; i < PT__GPEND; i++) { - if (get_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; - break; - } - put_reg(child, i, tmp); - data += sizeof(long); - } - ret = 0; - break; - } - - case PTRACE_GETFPREGS: { /* Get the child FP/Media state. */ - ret = 0; - if (copy_to_user((void *) data, - &child->thread.user->f, - sizeof(child->thread.user->f))) - ret = -EFAULT; - break; - } - - case PTRACE_SETFPREGS: { /* Set the child FP/Media state. */ - ret = 0; - if (copy_from_user(&child->thread.user->f, - (void *) data, - sizeof(child->thread.user->f))) - ret = -EFAULT; - break; - } + case PTRACE_GETREGS: /* Get all integer regs from the child. */ + return copy_regset_to_user(child, &user_frv_native_view, + REGSET_GENERAL, + 0, sizeof(child->thread.user->i), + (void __user *)data); + + case PTRACE_SETREGS: /* Set all integer regs in the child. */ + return copy_regset_from_user(child, &user_frv_native_view, + REGSET_GENERAL, + 0, sizeof(child->thread.user->i), + (const void __user *)data); + + case PTRACE_GETFPREGS: /* Get the child FP/Media state. */ + return copy_regset_to_user(child, &user_frv_native_view, + REGSET_FPMEDIA, + 0, sizeof(child->thread.user->f), + (void __user *)data); + + case PTRACE_SETFPREGS: /* Set the child FP/Media state. */ + return copy_regset_from_user(child, &user_frv_native_view, + REGSET_FPMEDIA, + 0, sizeof(child->thread.user->f), + (const void __user *)data); case PTRACE_GETFDPIC: tmp = 0; @@ -300,414 +365,36 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; default: - ret = -EIO; + ret = ptrace_request(child, request, addr, data); break; } return ret; } -int __nongprelbss kstrace; - -static const struct { - const char *name; - unsigned argmask; -} __syscall_name_table[NR_syscalls] = { - [0] = { "restart_syscall" }, - [1] = { "exit", 0x000001 }, - [2] = { "fork", 0xffffff }, - [3] = { "read", 0x000141 }, - [4] = { "write", 0x000141 }, - [5] = { "open", 0x000235 }, - [6] = { "close", 0x000001 }, - [7] = { "waitpid", 0x000141 }, - [8] = { "creat", 0x000025 }, - [9] = { "link", 0x000055 }, - [10] = { "unlink", 0x000005 }, - [11] = { "execve", 0x000445 }, - [12] = { "chdir", 0x000005 }, - [13] = { "time", 0x000004 }, - [14] = { "mknod", 0x000325 }, - [15] = { "chmod", 0x000025 }, - [16] = { "lchown", 0x000025 }, - [17] = { "break" }, - [18] = { "oldstat", 0x000045 }, - [19] = { "lseek", 0x000131 }, - [20] = { "getpid", 0xffffff }, - [21] = { "mount", 0x043555 }, - [22] = { "umount", 0x000005 }, - [23] = { "setuid", 0x000001 }, - [24] = { "getuid", 0xffffff }, - [25] = { "stime", 0x000004 }, - [26] = { "ptrace", 0x004413 }, - [27] = { "alarm", 0x000001 }, - [28] = { "oldfstat", 0x000041 }, - [29] = { "pause", 0xffffff }, - [30] = { "utime", 0x000045 }, - [31] = { "stty" }, - [32] = { "gtty" }, - [33] = { "access", 0x000025 }, - [34] = { "nice", 0x000001 }, - [35] = { "ftime" }, - [36] = { "sync", 0xffffff }, - [37] = { "kill", 0x000011 }, - [38] = { "rename", 0x000055 }, - [39] = { "mkdir", 0x000025 }, - [40] = { "rmdir", 0x000005 }, - [41] = { "dup", 0x000001 }, - [42] = { "pipe", 0x000004 }, - [43] = { "times", 0x000004 }, - [44] = { "prof" }, - [45] = { "brk", 0x000004 }, - [46] = { "setgid", 0x000001 }, - [47] = { "getgid", 0xffffff }, - [48] = { "signal", 0x000041 }, - [49] = { "geteuid", 0xffffff }, - [50] = { "getegid", 0xffffff }, - [51] = { "acct", 0x000005 }, - [52] = { "umount2", 0x000035 }, - [53] = { "lock" }, - [54] = { "ioctl", 0x000331 }, - [55] = { "fcntl", 0x000331 }, - [56] = { "mpx" }, - [57] = { "setpgid", 0x000011 }, - [58] = { "ulimit" }, - [60] = { "umask", 0x000002 }, - [61] = { "chroot", 0x000005 }, - [62] = { "ustat", 0x000043 }, - [63] = { "dup2", 0x000011 }, - [64] = { "getppid", 0xffffff }, - [65] = { "getpgrp", 0xffffff }, - [66] = { "setsid", 0xffffff }, - [67] = { "sigaction" }, - [68] = { "sgetmask" }, - [69] = { "ssetmask" }, - [70] = { "setreuid" }, - [71] = { "setregid" }, - [72] = { "sigsuspend" }, - [73] = { "sigpending" }, - [74] = { "sethostname" }, - [75] = { "setrlimit" }, - [76] = { "getrlimit" }, - [77] = { "getrusage" }, - [78] = { "gettimeofday" }, - [79] = { "settimeofday" }, - [80] = { "getgroups" }, - [81] = { "setgroups" }, - [82] = { "select" }, - [83] = { "symlink" }, - [84] = { "oldlstat" }, - [85] = { "readlink" }, - [86] = { "uselib" }, - [87] = { "swapon" }, - [88] = { "reboot" }, - [89] = { "readdir" }, - [91] = { "munmap", 0x000034 }, - [92] = { "truncate" }, - [93] = { "ftruncate" }, - [94] = { "fchmod" }, - [95] = { "fchown" }, - [96] = { "getpriority" }, - [97] = { "setpriority" }, - [99] = { "statfs" }, - [100] = { "fstatfs" }, - [102] = { "socketcall" }, - [103] = { "syslog" }, - [104] = { "setitimer" }, - [105] = { "getitimer" }, - [106] = { "stat" }, - [107] = { "lstat" }, - [108] = { "fstat" }, - [111] = { "vhangup" }, - [114] = { "wait4" }, - [115] = { "swapoff" }, - [116] = { "sysinfo" }, - [117] = { "ipc" }, - [118] = { "fsync" }, - [119] = { "sigreturn" }, - [120] = { "clone" }, - [121] = { "setdomainname" }, - [122] = { "uname" }, - [123] = { "modify_ldt" }, - [123] = { "cacheflush" }, - [124] = { "adjtimex" }, - [125] = { "mprotect" }, - [126] = { "sigprocmask" }, - [127] = { "create_module" }, - [128] = { "init_module" }, - [129] = { "delete_module" }, - [130] = { "get_kernel_syms" }, - [131] = { "quotactl" }, - [132] = { "getpgid" }, - [133] = { "fchdir" }, - [134] = { "bdflush" }, - [135] = { "sysfs" }, - [136] = { "personality" }, - [137] = { "afs_syscall" }, - [138] = { "setfsuid" }, - [139] = { "setfsgid" }, - [140] = { "_llseek", 0x014331 }, - [141] = { "getdents" }, - [142] = { "_newselect", 0x000141 }, - [143] = { "flock" }, - [144] = { "msync" }, - [145] = { "readv" }, - [146] = { "writev" }, - [147] = { "getsid", 0x000001 }, - [148] = { "fdatasync", 0x000001 }, - [149] = { "_sysctl", 0x000004 }, - [150] = { "mlock" }, - [151] = { "munlock" }, - [152] = { "mlockall" }, - [153] = { "munlockall" }, - [154] = { "sched_setparam" }, - [155] = { "sched_getparam" }, - [156] = { "sched_setscheduler" }, - [157] = { "sched_getscheduler" }, - [158] = { "sched_yield" }, - [159] = { "sched_get_priority_max" }, - [160] = { "sched_get_priority_min" }, - [161] = { "sched_rr_get_interval" }, - [162] = { "nanosleep", 0x000044 }, - [163] = { "mremap" }, - [164] = { "setresuid" }, - [165] = { "getresuid" }, - [166] = { "vm86" }, - [167] = { "query_module" }, - [168] = { "poll" }, - [169] = { "nfsservctl" }, - [170] = { "setresgid" }, - [171] = { "getresgid" }, - [172] = { "prctl", 0x333331 }, - [173] = { "rt_sigreturn", 0xffffff }, - [174] = { "rt_sigaction", 0x001441 }, - [175] = { "rt_sigprocmask", 0x001441 }, - [176] = { "rt_sigpending", 0x000014 }, - [177] = { "rt_sigtimedwait", 0x001444 }, - [178] = { "rt_sigqueueinfo", 0x000411 }, - [179] = { "rt_sigsuspend", 0x000014 }, - [180] = { "pread", 0x003341 }, - [181] = { "pwrite", 0x003341 }, - [182] = { "chown", 0x000115 }, - [183] = { "getcwd" }, - [184] = { "capget" }, - [185] = { "capset" }, - [186] = { "sigaltstack" }, - [187] = { "sendfile" }, - [188] = { "getpmsg" }, - [189] = { "putpmsg" }, - [190] = { "vfork", 0xffffff }, - [191] = { "ugetrlimit" }, - [192] = { "mmap2", 0x313314 }, - [193] = { "truncate64" }, - [194] = { "ftruncate64" }, - [195] = { "stat64", 0x000045 }, - [196] = { "lstat64", 0x000045 }, - [197] = { "fstat64", 0x000041 }, - [198] = { "lchown32" }, - [199] = { "getuid32", 0xffffff }, - [200] = { "getgid32", 0xffffff }, - [201] = { "geteuid32", 0xffffff }, - [202] = { "getegid32", 0xffffff }, - [203] = { "setreuid32" }, - [204] = { "setregid32" }, - [205] = { "getgroups32" }, - [206] = { "setgroups32" }, - [207] = { "fchown32" }, - [208] = { "setresuid32" }, - [209] = { "getresuid32" }, - [210] = { "setresgid32" }, - [211] = { "getresgid32" }, - [212] = { "chown32" }, - [213] = { "setuid32" }, - [214] = { "setgid32" }, - [215] = { "setfsuid32" }, - [216] = { "setfsgid32" }, - [217] = { "pivot_root" }, - [218] = { "mincore" }, - [219] = { "madvise" }, - [220] = { "getdents64" }, - [221] = { "fcntl64" }, - [223] = { "security" }, - [224] = { "gettid" }, - [225] = { "readahead" }, - [226] = { "setxattr" }, - [227] = { "lsetxattr" }, - [228] = { "fsetxattr" }, - [229] = { "getxattr" }, - [230] = { "lgetxattr" }, - [231] = { "fgetxattr" }, - [232] = { "listxattr" }, - [233] = { "llistxattr" }, - [234] = { "flistxattr" }, - [235] = { "removexattr" }, - [236] = { "lremovexattr" }, - [237] = { "fremovexattr" }, - [238] = { "tkill" }, - [239] = { "sendfile64" }, - [240] = { "futex" }, - [241] = { "sched_setaffinity" }, - [242] = { "sched_getaffinity" }, - [243] = { "set_thread_area" }, - [244] = { "get_thread_area" }, - [245] = { "io_setup" }, - [246] = { "io_destroy" }, - [247] = { "io_getevents" }, - [248] = { "io_submit" }, - [249] = { "io_cancel" }, - [250] = { "fadvise64" }, - [252] = { "exit_group", 0x000001 }, - [253] = { "lookup_dcookie" }, - [254] = { "epoll_create" }, - [255] = { "epoll_ctl" }, - [256] = { "epoll_wait" }, - [257] = { "remap_file_pages" }, - [258] = { "set_tid_address" }, - [259] = { "timer_create" }, - [260] = { "timer_settime" }, - [261] = { "timer_gettime" }, - [262] = { "timer_getoverrun" }, - [263] = { "timer_delete" }, - [264] = { "clock_settime" }, - [265] = { "clock_gettime" }, - [266] = { "clock_getres" }, - [267] = { "clock_nanosleep" }, - [268] = { "statfs64" }, - [269] = { "fstatfs64" }, - [270] = { "tgkill" }, - [271] = { "utimes" }, - [272] = { "fadvise64_64" }, - [273] = { "vserver" }, - [274] = { "mbind" }, - [275] = { "get_mempolicy" }, - [276] = { "set_mempolicy" }, - [277] = { "mq_open" }, - [278] = { "mq_unlink" }, - [279] = { "mq_timedsend" }, - [280] = { "mq_timedreceive" }, - [281] = { "mq_notify" }, - [282] = { "mq_getsetattr" }, - [283] = { "sys_kexec_load" }, -}; - -asmlinkage void do_syscall_trace(int leaving) +/* + * handle tracing of system call entry + * - return the revised system call number or ULONG_MAX to cause ENOSYS + */ +asmlinkage unsigned long syscall_trace_entry(void) { -#if 0 - unsigned long *argp; - const char *name; - unsigned argmask; - char buffer[16]; - - if (!kstrace) - return; - - if (!current->mm) - return; - - if (__frame->gr7 == __NR_close) - return; - -#if 0 - if (__frame->gr7 != __NR_mmap2 && - __frame->gr7 != __NR_vfork && - __frame->gr7 != __NR_execve && - __frame->gr7 != __NR_exit) - return; -#endif - - argmask = 0; - name = NULL; - if (__frame->gr7 < NR_syscalls) { - name = __syscall_name_table[__frame->gr7].name; - argmask = __syscall_name_table[__frame->gr7].argmask; - } - if (!name) { - sprintf(buffer, "sys_%lx", __frame->gr7); - name = buffer; - } - - if (!leaving) { - if (!argmask) { - printk(KERN_CRIT "[%d] %s(%lx,%lx,%lx,%lx,%lx,%lx)\n", - current->pid, - name, - __frame->gr8, - __frame->gr9, - __frame->gr10, - __frame->gr11, - __frame->gr12, - __frame->gr13); - } - else if (argmask == 0xffffff) { - printk(KERN_CRIT "[%d] %s()\n", - current->pid, - name); - } - else { - printk(KERN_CRIT "[%d] %s(", - current->pid, - name); - - argp = &__frame->gr8; - - do { - switch (argmask & 0xf) { - case 1: - printk("%ld", (long) *argp); - break; - case 2: - printk("%lo", *argp); - break; - case 3: - printk("%lx", *argp); - break; - case 4: - printk("%p", (void *) *argp); - break; - case 5: - printk("\"%s\"", (char *) *argp); - break; - } - - argp++; - argmask >>= 4; - if (argmask) - printk(","); - - } while (argmask); - - printk(")\n"); - } - } - else { - if ((int)__frame->gr8 > -4096 && (int)__frame->gr8 < 4096) - printk(KERN_CRIT "[%d] %s() = %ld\n", current->pid, name, __frame->gr8); - else - printk(KERN_CRIT "[%d] %s() = %lx\n", current->pid, name, __frame->gr8); + __frame->__status |= REG__STATUS_SYSC_ENTRY; + if (tracehook_report_syscall_entry(__frame)) { + /* tracing decided this syscall should not happen, so + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in + * __frame->syscallno + */ + return ULONG_MAX; } - return; -#endif - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - - if (!(current->ptrace & PT_PTRACED)) - return; - /* we need to indicate entry or exit to strace */ - if (leaving) - __frame->__status |= REG__STATUS_SYSC_EXIT; - else - __frame->__status |= REG__STATUS_SYSC_ENTRY; - - ptrace_notify(SIGTRAP); + return __frame->syscallno; +} - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } +/* + * handle tracing of system call exit + */ +asmlinkage void syscall_trace_exit(void) +{ + __frame->__status |= REG__STATUS_SYSC_EXIT; + tracehook_report_syscall_exit(__frame, 0); } diff --git a/trunk/arch/frv/kernel/signal.c b/trunk/arch/frv/kernel/signal.c index 3bdb368292a8..4a7a62c6e783 100644 --- a/trunk/arch/frv/kernel/signal.c +++ b/trunk/arch/frv/kernel/signal.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -516,6 +517,9 @@ static void do_signal(void) * clear the TIF_RESTORE_SIGMASK flag */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, __frame, + test_thread_flag(TIF_SINGLESTEP)); } return; @@ -564,4 +568,10 @@ asmlinkage void do_notify_resume(__u32 thread_info_flags) if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) do_signal(); + /* deal with notification on about to resume userspace execution */ + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(__frame); + } + } /* end do_notify_resume() */ diff --git a/trunk/arch/frv/kernel/uaccess.c b/trunk/arch/frv/kernel/uaccess.c index 9fb771a20df3..374f88d6cc00 100644 --- a/trunk/arch/frv/kernel/uaccess.c +++ b/trunk/arch/frv/kernel/uaccess.c @@ -23,8 +23,7 @@ long strncpy_from_user(char *dst, const char __user *src, long count) char *p, ch; long err = -EFAULT; - if (count < 0) - BUG(); + BUG_ON(count < 0); p = dst; @@ -76,8 +75,7 @@ long strnlen_user(const char __user *src, long count) long err = 0; char ch; - if (count < 0) - BUG(); + BUG_ON(count < 0); #ifndef CONFIG_MMU if ((unsigned long) src < memory_start) diff --git a/trunk/arch/frv/kernel/vmlinux.lds.S b/trunk/arch/frv/kernel/vmlinux.lds.S index b95c4eace62f..22d9787406ed 100644 --- a/trunk/arch/frv/kernel/vmlinux.lds.S +++ b/trunk/arch/frv/kernel/vmlinux.lds.S @@ -26,7 +26,7 @@ SECTIONS _sinittext = .; .init.text : { - *(.text.head) + HEAD_TEXT #ifndef CONFIG_DEBUG_INFO INIT_TEXT EXIT_TEXT diff --git a/trunk/arch/frv/mb93090-mb00/pci-dma-nommu.c b/trunk/arch/frv/mb93090-mb00/pci-dma-nommu.c index 52ff9aec799d..4e1ba0b15443 100644 --- a/trunk/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/trunk/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -116,8 +116,7 @@ EXPORT_SYMBOL(dma_free_coherent); dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size); @@ -151,8 +150,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, frv_cache_wback_inv(sg_dma_address(&sg[i]), sg_dma_address(&sg[i]) + sg_dma_len(&sg[i])); - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); return nents; } diff --git a/trunk/arch/frv/mb93090-mb00/pci-dma.c b/trunk/arch/frv/mb93090-mb00/pci-dma.c index 3ddedebc4eb3..45954f0813dc 100644 --- a/trunk/arch/frv/mb93090-mb00/pci-dma.c +++ b/trunk/arch/frv/mb93090-mb00/pci-dma.c @@ -48,8 +48,7 @@ EXPORT_SYMBOL(dma_free_coherent); dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size); @@ -81,8 +80,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, void *vaddr; int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); dampr2 = __get_DAMPR(2); diff --git a/trunk/arch/h8300/include/asm/flat.h b/trunk/arch/h8300/include/asm/flat.h index 2a873508a9a1..bd12b31b90e6 100644 --- a/trunk/arch/h8300/include/asm/flat.h +++ b/trunk/arch/h8300/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __H8300_FLAT_H__ #define __H8300_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) 1 #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/trunk/arch/h8300/kernel/module.c b/trunk/arch/h8300/kernel/module.c index cfc9127d2ced..0865e291c20d 100644 --- a/trunk/arch/h8300/kernel/module.c +++ b/trunk/arch/h8300/kernel/module.c @@ -23,8 +23,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } /* We don't need anything special. */ diff --git a/trunk/arch/ia64/hp/sim/hpsim_irq.c b/trunk/arch/ia64/hp/sim/hpsim_irq.c index cc0a3182db3c..acb5047ab573 100644 --- a/trunk/arch/ia64/hp/sim/hpsim_irq.c +++ b/trunk/arch/ia64/hp/sim/hpsim_irq.c @@ -21,9 +21,10 @@ hpsim_irq_noop (unsigned int irq) { } -static void +static int hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b) { + return 0; } static struct hw_interrupt_type irq_type_hp_sim = { diff --git a/trunk/arch/ia64/include/asm/idle.h b/trunk/arch/ia64/include/asm/idle.h new file mode 100644 index 000000000000..b7685015a8ba --- /dev/null +++ b/trunk/arch/ia64/include/asm/idle.h @@ -0,0 +1,7 @@ +#ifndef _ASM_IA64_IDLE_H +#define _ASM_IA64_IDLE_H + +static inline void enter_idle(void) { } +static inline void exit_idle(void) { } + +#endif /* _ASM_IA64_IDLE_H */ diff --git a/trunk/arch/ia64/include/asm/kvm_host.h b/trunk/arch/ia64/include/asm/kvm_host.h index 4542651e6acb..5f43697aed30 100644 --- a/trunk/arch/ia64/include/asm/kvm_host.h +++ b/trunk/arch/ia64/include/asm/kvm_host.h @@ -371,6 +371,7 @@ struct kvm_vcpu_arch { int last_run_cpu; int vmm_tr_slot; int vm_tr_slot; + int sn_rtc_tr_slot; #define KVM_MP_STATE_RUNNABLE 0 #define KVM_MP_STATE_UNINITIALIZED 1 @@ -465,6 +466,7 @@ struct kvm_arch { unsigned long vmm_init_rr; int online_vcpus; + int is_sn2; struct kvm_ioapic *vioapic; struct kvm_vm_stat stat; @@ -472,6 +474,7 @@ struct kvm_arch { struct list_head assigned_dev_head; struct iommu_domain *iommu_domain; + int iommu_flags; struct hlist_head irq_ack_notifier_list; unsigned long irq_sources_bitmap; @@ -578,6 +581,8 @@ struct kvm_vmm_info{ kvm_vmm_entry *vmm_entry; kvm_tramp_entry *tramp_entry; unsigned long vmm_ivt; + unsigned long patch_mov_ar; + unsigned long patch_mov_ar_sn2; }; int kvm_highest_pending_irq(struct kvm_vcpu *vcpu); @@ -585,7 +590,6 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu); int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run); void kvm_sal_emul(struct kvm_vcpu *vcpu); -static inline void kvm_inject_nmi(struct kvm_vcpu *vcpu) {} #endif /* __ASSEMBLY__*/ #endif diff --git a/trunk/arch/ia64/include/asm/pgtable.h b/trunk/arch/ia64/include/asm/pgtable.h index 7a9bff47564f..0a9cc73d35c7 100644 --- a/trunk/arch/ia64/include/asm/pgtable.h +++ b/trunk/arch/ia64/include/asm/pgtable.h @@ -146,6 +146,8 @@ #define PAGE_GATE __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX) #define PAGE_KERNEL __pgprot(__DIRTY_BITS | _PAGE_PL_0 | _PAGE_AR_RWX) #define PAGE_KERNELRX __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX) +#define PAGE_KERNEL_UC __pgprot(__DIRTY_BITS | _PAGE_PL_0 | _PAGE_AR_RWX | \ + _PAGE_MA_UC) # ifndef __ASSEMBLY__ diff --git a/trunk/arch/ia64/include/asm/xen/events.h b/trunk/arch/ia64/include/asm/xen/events.h index 73248781fba8..b8370c8b6198 100644 --- a/trunk/arch/ia64/include/asm/xen/events.h +++ b/trunk/arch/ia64/include/asm/xen/events.h @@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return !(ia64_psr(regs)->i); } -static inline void xen_do_IRQ(int irq, struct pt_regs *regs) +static inline void handle_irq(int irq, struct pt_regs *regs) { - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - irq_enter(); __do_IRQ(irq); - irq_exit(); - set_irq_regs(old_regs); } #define irq_ctx_init(cpu) do { } while (0) diff --git a/trunk/arch/ia64/kernel/acpi.c b/trunk/arch/ia64/kernel/acpi.c index 5510317db37b..baec6f00f7f3 100644 --- a/trunk/arch/ia64/kernel/acpi.c +++ b/trunk/arch/ia64/kernel/acpi.c @@ -636,7 +636,7 @@ void __init acpi_numa_arch_fixup(void) * success: return IRQ number (>=0) * failure: return < 0 */ -int acpi_register_gsi(u32 gsi, int triggering, int polarity) +int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) { if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) return gsi; @@ -678,7 +678,8 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) fadt = (struct acpi_table_fadt *)fadt_header; - acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); + acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, + ACPI_ACTIVE_LOW); return 0; } diff --git a/trunk/arch/ia64/kernel/iosapic.c b/trunk/arch/ia64/kernel/iosapic.c index 166e0d839fa0..f92cef47bf86 100644 --- a/trunk/arch/ia64/kernel/iosapic.c +++ b/trunk/arch/ia64/kernel/iosapic.c @@ -329,7 +329,7 @@ unmask_irq (unsigned int irq) } -static void +static int iosapic_set_affinity(unsigned int irq, const struct cpumask *mask) { #ifdef CONFIG_SMP @@ -343,15 +343,15 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpumask_first_and(cpu_online_mask, mask); if (cpu >= nr_cpu_ids) - return; + return -1; if (irq_prepare_move(irq, cpu)) - return; + return -1; dest = cpu_physical_id(cpu); if (!iosapic_intr_info[irq].count) - return; /* not an IOSAPIC interrupt */ + return -1; /* not an IOSAPIC interrupt */ set_irq_affinity_info(irq, dest, redir); @@ -376,7 +376,9 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask) iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32); iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32); } + #endif + return 0; } /* diff --git a/trunk/arch/ia64/kernel/irq_ia64.c b/trunk/arch/ia64/kernel/irq_ia64.c index acc4d19ae62a..b448197728be 100644 --- a/trunk/arch/ia64/kernel/irq_ia64.c +++ b/trunk/arch/ia64/kernel/irq_ia64.c @@ -610,6 +610,9 @@ static struct irqaction ipi_irqaction = { .name = "IPI" }; +/* + * KVM uses this interrupt to force a cpu out of guest mode + */ static struct irqaction resched_irqaction = { .handler = dummy_handler, .flags = IRQF_DISABLED, diff --git a/trunk/arch/ia64/kernel/msi_ia64.c b/trunk/arch/ia64/kernel/msi_ia64.c index 2b15e233f7fe..0f8ade9331ba 100644 --- a/trunk/arch/ia64/kernel/msi_ia64.c +++ b/trunk/arch/ia64/kernel/msi_ia64.c @@ -12,7 +12,7 @@ static struct irq_chip ia64_msi_chip; #ifdef CONFIG_SMP -static void ia64_set_msi_irq_affinity(unsigned int irq, +static int ia64_set_msi_irq_affinity(unsigned int irq, const cpumask_t *cpu_mask) { struct msi_msg msg; @@ -20,10 +20,10 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, int cpu = first_cpu(*cpu_mask); if (!cpu_online(cpu)) - return; + return -1; if (irq_prepare_move(irq, cpu)) - return; + return -1; read_msi_msg(irq, &msg); @@ -39,6 +39,8 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, write_msi_msg(irq, &msg); cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + + return 0; } #endif /* CONFIG_SMP */ @@ -130,17 +132,17 @@ void arch_teardown_msi_irq(unsigned int irq) #ifdef CONFIG_DMAR #ifdef CONFIG_SMP -static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_cfg *cfg = irq_cfg + irq; struct msi_msg msg; int cpu = cpumask_first(mask); if (!cpu_online(cpu)) - return; + return -1; if (irq_prepare_move(irq, cpu)) - return; + return -1; dmar_msi_read(irq, &msg); @@ -151,6 +153,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) dmar_msi_write(irq, &msg); cpumask_copy(irq_desc[irq].affinity, mask); + + return 0; } #endif /* CONFIG_SMP */ diff --git a/trunk/arch/ia64/kvm/Kconfig b/trunk/arch/ia64/kvm/Kconfig index 0a2d6b86075a..64d520937874 100644 --- a/trunk/arch/ia64/kvm/Kconfig +++ b/trunk/arch/ia64/kvm/Kconfig @@ -23,7 +23,7 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" - depends on HAVE_KVM && EXPERIMENTAL + depends on HAVE_KVM && MODULES && EXPERIMENTAL # for device assignment: depends on PCI select PREEMPT_NOTIFIERS diff --git a/trunk/arch/ia64/kvm/kvm-ia64.c b/trunk/arch/ia64/kvm/kvm-ia64.c index 28af6a731bb8..80c57b0a21c4 100644 --- a/trunk/arch/ia64/kvm/kvm-ia64.c +++ b/trunk/arch/ia64/kvm/kvm-ia64.c @@ -41,6 +41,9 @@ #include #include #include +#include +#include +#include #include "misc.h" #include "vti.h" @@ -65,6 +68,16 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { NULL } }; +static unsigned long kvm_get_itc(struct kvm_vcpu *vcpu) +{ +#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC) + if (vcpu->kvm->arch.is_sn2) + return rtc_time(); + else +#endif + return ia64_getreg(_IA64_REG_AR_ITC); +} + static void kvm_flush_icache(unsigned long start, unsigned long len) { int l; @@ -119,8 +132,7 @@ void kvm_arch_hardware_enable(void *garbage) unsigned long saved_psr; int slot; - pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base), - PAGE_KERNEL)); + pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base), PAGE_KERNEL)); local_irq_save(saved_psr); slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT); local_irq_restore(saved_psr); @@ -283,6 +295,18 @@ static int handle_sal_call(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) } +static int __apic_accept_irq(struct kvm_vcpu *vcpu, uint64_t vector) +{ + struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd); + + if (!test_and_set_bit(vector, &vpd->irr[0])) { + vcpu->arch.irq_new_pending = 1; + kvm_vcpu_kick(vcpu); + return 1; + } + return 0; +} + /* * offset: address offset to IPI space. * value: deliver value. @@ -292,20 +316,20 @@ static void vcpu_deliver_ipi(struct kvm_vcpu *vcpu, uint64_t dm, { switch (dm) { case SAPIC_FIXED: - kvm_apic_set_irq(vcpu, vector, 0); break; case SAPIC_NMI: - kvm_apic_set_irq(vcpu, 2, 0); + vector = 2; break; case SAPIC_EXTINT: - kvm_apic_set_irq(vcpu, 0, 0); + vector = 0; break; case SAPIC_INIT: case SAPIC_PMI: default: printk(KERN_ERR"kvm: Unimplemented Deliver reserved IPI!\n"); - break; + return; } + __apic_accept_irq(vcpu, vector); } static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id, @@ -413,6 +437,23 @@ static int handle_switch_rr6(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) return 1; } +static int kvm_sn2_setup_mappings(struct kvm_vcpu *vcpu) +{ + unsigned long pte, rtc_phys_addr, map_addr; + int slot; + + map_addr = KVM_VMM_BASE + (1UL << KVM_VMM_SHIFT); + rtc_phys_addr = LOCAL_MMR_OFFSET | SH_RTC; + pte = pte_val(mk_pte_phys(rtc_phys_addr, PAGE_KERNEL_UC)); + slot = ia64_itr_entry(0x3, map_addr, pte, PAGE_SHIFT); + vcpu->arch.sn_rtc_tr_slot = slot; + if (slot < 0) { + printk(KERN_ERR "Mayday mayday! RTC mapping failed!\n"); + slot = 0; + } + return slot; +} + int kvm_emulate_halt(struct kvm_vcpu *vcpu) { @@ -426,7 +467,7 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu) if (irqchip_in_kernel(vcpu->kvm)) { - vcpu_now_itc = ia64_getreg(_IA64_REG_AR_ITC) + vcpu->arch.itc_offset; + vcpu_now_itc = kvm_get_itc(vcpu) + vcpu->arch.itc_offset; if (time_after(vcpu_now_itc, vpd->itm)) { vcpu->arch.timer_check = 1; @@ -447,10 +488,10 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu) hrtimer_cancel(p_ht); vcpu->arch.ht_active = 0; - if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests)) + if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests) || + kvm_cpu_has_pending_timer(vcpu)) if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED) - vcpu->arch.mp_state = - KVM_MP_STATE_RUNNABLE; + vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE; if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE) return -EINTR; @@ -551,22 +592,35 @@ static int kvm_insert_vmm_mapping(struct kvm_vcpu *vcpu) if (r < 0) goto out; vcpu->arch.vm_tr_slot = r; + +#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC) + if (kvm->arch.is_sn2) { + r = kvm_sn2_setup_mappings(vcpu); + if (r < 0) + goto out; + } +#endif + r = 0; out: return r; - } static void kvm_purge_vmm_mapping(struct kvm_vcpu *vcpu) { - + struct kvm *kvm = vcpu->kvm; ia64_ptr_entry(0x3, vcpu->arch.vmm_tr_slot); ia64_ptr_entry(0x3, vcpu->arch.vm_tr_slot); - +#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC) + if (kvm->arch.is_sn2) + ia64_ptr_entry(0x3, vcpu->arch.sn_rtc_tr_slot); +#endif } static int kvm_vcpu_pre_transition(struct kvm_vcpu *vcpu) { + unsigned long psr; + int r; int cpu = smp_processor_id(); if (vcpu->arch.last_run_cpu != cpu || @@ -578,62 +632,60 @@ static int kvm_vcpu_pre_transition(struct kvm_vcpu *vcpu) vcpu->arch.host_rr6 = ia64_get_rr(RR6); vti_set_rr6(vcpu->arch.vmm_rr); - return kvm_insert_vmm_mapping(vcpu); + local_irq_save(psr); + r = kvm_insert_vmm_mapping(vcpu); + local_irq_restore(psr); + return r; } + static void kvm_vcpu_post_transition(struct kvm_vcpu *vcpu) { kvm_purge_vmm_mapping(vcpu); vti_set_rr6(vcpu->arch.host_rr6); } -static int vti_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) +static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) { union context *host_ctx, *guest_ctx; int r; - /*Get host and guest context with guest address space.*/ - host_ctx = kvm_get_host_context(vcpu); - guest_ctx = kvm_get_guest_context(vcpu); - - r = kvm_vcpu_pre_transition(vcpu); - if (r < 0) - goto out; - kvm_vmm_info->tramp_entry(host_ctx, guest_ctx); - kvm_vcpu_post_transition(vcpu); - r = 0; -out: - return r; -} - -static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) -{ - int r; + /* + * down_read() may sleep and return with interrupts enabled + */ + down_read(&vcpu->kvm->slots_lock); again: - preempt_disable(); - local_irq_disable(); - if (signal_pending(current)) { - local_irq_enable(); - preempt_enable(); r = -EINTR; kvm_run->exit_reason = KVM_EXIT_INTR; goto out; } - vcpu->guest_mode = 1; + preempt_disable(); + local_irq_disable(); + + /*Get host and guest context with guest address space.*/ + host_ctx = kvm_get_host_context(vcpu); + guest_ctx = kvm_get_guest_context(vcpu); + + clear_bit(KVM_REQ_KICK, &vcpu->requests); + + r = kvm_vcpu_pre_transition(vcpu); + if (r < 0) + goto vcpu_run_fail; + + up_read(&vcpu->kvm->slots_lock); kvm_guest_enter(); - down_read(&vcpu->kvm->slots_lock); - r = vti_vcpu_run(vcpu, kvm_run); - if (r < 0) { - local_irq_enable(); - preempt_enable(); - kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY; - goto out; - } + + /* + * Transition to the guest + */ + kvm_vmm_info->tramp_entry(host_ctx, guest_ctx); + + kvm_vcpu_post_transition(vcpu); vcpu->arch.launched = 1; - vcpu->guest_mode = 0; + set_bit(KVM_REQ_KICK, &vcpu->requests); local_irq_enable(); /* @@ -644,9 +696,10 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) */ barrier(); kvm_guest_exit(); - up_read(&vcpu->kvm->slots_lock); preempt_enable(); + down_read(&vcpu->kvm->slots_lock); + r = kvm_handle_exit(kvm_run, vcpu); if (r > 0) { @@ -655,12 +708,20 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) } out: + up_read(&vcpu->kvm->slots_lock); if (r > 0) { kvm_resched(vcpu); + down_read(&vcpu->kvm->slots_lock); goto again; } return r; + +vcpu_run_fail: + local_irq_enable(); + preempt_enable(); + kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY; + goto out; } static void kvm_set_mmio_data(struct kvm_vcpu *vcpu) @@ -786,6 +847,9 @@ struct kvm *kvm_arch_create_vm(void) if (IS_ERR(kvm)) return ERR_PTR(-ENOMEM); + + kvm->arch.is_sn2 = ia64_platform_is("sn2"); + kvm_init_vm(kvm); kvm->arch.online_vcpus = 0; @@ -882,7 +946,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) RESTORE_REGS(saved_gp); vcpu->arch.irq_new_pending = 1; - vcpu->arch.itc_offset = regs->saved_itc - ia64_getreg(_IA64_REG_AR_ITC); + vcpu->arch.itc_offset = regs->saved_itc - kvm_get_itc(vcpu); set_bit(KVM_REQ_RESUME, &vcpu->requests); vcpu_put(vcpu); @@ -1041,10 +1105,6 @@ static void kvm_free_vmm_area(void) } } -static void vti_vcpu_load(struct kvm_vcpu *vcpu, int cpu) -{ -} - static int vti_init_vpd(struct kvm_vcpu *vcpu) { int i; @@ -1163,7 +1223,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) regs->cr_iip = PALE_RESET_ENTRY; /*Initialize itc offset for vcpus*/ - itc_offset = 0UL - ia64_getreg(_IA64_REG_AR_ITC); + itc_offset = 0UL - kvm_get_itc(vcpu); for (i = 0; i < kvm->arch.online_vcpus; i++) { v = (struct kvm_vcpu *)((char *)vcpu + sizeof(struct kvm_vcpu_data) * i); @@ -1235,6 +1295,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id) local_irq_save(psr); r = kvm_insert_vmm_mapping(vcpu); + local_irq_restore(psr); if (r) goto fail; r = kvm_vcpu_init(vcpu, vcpu->kvm, id); @@ -1252,13 +1313,11 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id) goto uninit; kvm_purge_vmm_mapping(vcpu); - local_irq_restore(psr); return 0; uninit: kvm_vcpu_uninit(vcpu); fail: - local_irq_restore(psr); return r; } @@ -1289,7 +1348,6 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, vcpu->kvm = kvm; cpu = get_cpu(); - vti_vcpu_load(vcpu, cpu); r = vti_vcpu_setup(vcpu, id); put_cpu(); @@ -1425,7 +1483,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) } for (i = 0; i < 4; i++) regs->insvc[i] = vcpu->arch.insvc[i]; - regs->saved_itc = vcpu->arch.itc_offset + ia64_getreg(_IA64_REG_AR_ITC); + regs->saved_itc = vcpu->arch.itc_offset + kvm_get_itc(vcpu); SAVE_REGS(xtp); SAVE_REGS(metaphysical_rr0); SAVE_REGS(metaphysical_rr4); @@ -1572,6 +1630,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm, void kvm_arch_flush_shadow(struct kvm *kvm) { + kvm_flush_remote_tlbs(kvm); } long kvm_arch_dev_ioctl(struct file *filp, @@ -1614,8 +1673,37 @@ static int vti_cpu_has_kvm_support(void) return 0; } + +/* + * On SN2, the ITC isn't stable, so copy in fast path code to use the + * SN2 RTC, replacing the ITC based default verion. + */ +static void kvm_patch_vmm(struct kvm_vmm_info *vmm_info, + struct module *module) +{ + unsigned long new_ar, new_ar_sn2; + unsigned long module_base; + + if (!ia64_platform_is("sn2")) + return; + + module_base = (unsigned long)module->module_core; + + new_ar = kvm_vmm_base + vmm_info->patch_mov_ar - module_base; + new_ar_sn2 = kvm_vmm_base + vmm_info->patch_mov_ar_sn2 - module_base; + + printk(KERN_INFO "kvm: Patching ITC emulation to use SGI SN2 RTC " + "as source\n"); + + /* + * Copy the SN2 version of mov_ar into place. They are both + * the same size, so 6 bundles is sufficient (6 * 0x10). + */ + memcpy((void *)new_ar, (void *)new_ar_sn2, 0x60); +} + static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info, - struct module *module) + struct module *module) { unsigned long module_base; unsigned long vmm_size; @@ -1637,6 +1725,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info, return -EFAULT; memcpy((void *)kvm_vmm_base, (void *)module_base, vmm_size); + kvm_patch_vmm(vmm_info, module); kvm_flush_icache(kvm_vmm_base, vmm_size); /*Recalculate kvm_vmm_info based on new VMM*/ @@ -1790,38 +1879,24 @@ void kvm_arch_hardware_unsetup(void) { } -static void vcpu_kick_intr(void *info) -{ -#ifdef DEBUG - struct kvm_vcpu *vcpu = (struct kvm_vcpu *)info; - printk(KERN_DEBUG"vcpu_kick_intr %p \n", vcpu); -#endif -} - void kvm_vcpu_kick(struct kvm_vcpu *vcpu) { - int ipi_pcpu = vcpu->cpu; - int cpu = get_cpu(); + int me; + int cpu = vcpu->cpu; if (waitqueue_active(&vcpu->wq)) wake_up_interruptible(&vcpu->wq); - if (vcpu->guest_mode && cpu != ipi_pcpu) - smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0); + me = get_cpu(); + if (cpu != me && (unsigned) cpu < nr_cpu_ids && cpu_online(cpu)) + if (!test_and_set_bit(KVM_REQ_KICK, &vcpu->requests)) + smp_send_reschedule(cpu); put_cpu(); } -int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig) +int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq) { - - struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd); - - if (!test_and_set_bit(vec, &vpd->irr[0])) { - vcpu->arch.irq_new_pending = 1; - kvm_vcpu_kick(vcpu); - return 1; - } - return 0; + return __apic_accept_irq(vcpu, irq->vector); } int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest) @@ -1834,20 +1909,18 @@ int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda) return 0; } -struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector, - unsigned long bitmap) +int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2) { - struct kvm_vcpu *lvcpu = kvm->vcpus[0]; - int i; - - for (i = 1; i < kvm->arch.online_vcpus; i++) { - if (!kvm->vcpus[i]) - continue; - if (lvcpu->arch.xtp > kvm->vcpus[i]->arch.xtp) - lvcpu = kvm->vcpus[i]; - } + return vcpu1->arch.xtp - vcpu2->arch.xtp; +} - return lvcpu; +int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source, + int short_hand, int dest, int dest_mode) +{ + struct kvm_lapic *target = vcpu->arch.apic; + return (dest_mode == 0) ? + kvm_apic_match_physical_addr(target, dest) : + kvm_apic_match_logical_addr(target, dest); } static int find_highest_bits(int *dat) @@ -1886,6 +1959,12 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu) return 0; } +int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu) +{ + /* do real check here */ + return 1; +} + int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) { return vcpu->arch.timer_fired; @@ -1916,6 +1995,7 @@ static int vcpu_reset(struct kvm_vcpu *vcpu) long psr; local_irq_save(psr); r = kvm_insert_vmm_mapping(vcpu); + local_irq_restore(psr); if (r) goto fail; @@ -1928,7 +2008,6 @@ static int vcpu_reset(struct kvm_vcpu *vcpu) kvm_purge_vmm_mapping(vcpu); r = 0; fail: - local_irq_restore(psr); return r; } diff --git a/trunk/arch/ia64/kvm/kvm_fw.c b/trunk/arch/ia64/kvm/kvm_fw.c index a8ae52ed5635..e4b82319881d 100644 --- a/trunk/arch/ia64/kvm/kvm_fw.c +++ b/trunk/arch/ia64/kvm/kvm_fw.c @@ -21,6 +21,9 @@ #include #include +#include +#include +#include #include "vti.h" #include "misc.h" @@ -188,12 +191,35 @@ static struct ia64_pal_retval pal_freq_base(struct kvm_vcpu *vcpu) return result; } -static struct ia64_pal_retval pal_freq_ratios(struct kvm_vcpu *vcpu) +/* + * On the SGI SN2, the ITC isn't stable. Emulation backed by the SN2 + * RTC is used instead. This function patches the ratios from SAL + * to match the RTC before providing them to the guest. + */ +static void sn2_patch_itc_freq_ratios(struct ia64_pal_retval *result) { + struct pal_freq_ratio *ratio; + unsigned long sal_freq, sal_drift, factor; + + result->status = ia64_sal_freq_base(SAL_FREQ_BASE_PLATFORM, + &sal_freq, &sal_drift); + ratio = (struct pal_freq_ratio *)&result->v2; + factor = ((sal_freq * 3) + (sn_rtc_cycles_per_second / 2)) / + sn_rtc_cycles_per_second; + + ratio->num = 3; + ratio->den = factor; +} +static struct ia64_pal_retval pal_freq_ratios(struct kvm_vcpu *vcpu) +{ struct ia64_pal_retval result; PAL_CALL(result, PAL_FREQ_RATIOS, 0, 0, 0); + + if (vcpu->kvm->arch.is_sn2) + sn2_patch_itc_freq_ratios(&result); + return result; } diff --git a/trunk/arch/ia64/kvm/lapic.h b/trunk/arch/ia64/kvm/lapic.h index 6d6cbcb14893..ee541cebcd78 100644 --- a/trunk/arch/ia64/kvm/lapic.h +++ b/trunk/arch/ia64/kvm/lapic.h @@ -20,6 +20,10 @@ void kvm_free_lapic(struct kvm_vcpu *vcpu); int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest); int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda); -int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig); +int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source, + int short_hand, int dest, int dest_mode); +int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2); +int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq); +#define kvm_apic_present(x) (true) #endif diff --git a/trunk/arch/ia64/kvm/optvfault.S b/trunk/arch/ia64/kvm/optvfault.S index 32254ce9a1bd..f793be3effff 100644 --- a/trunk/arch/ia64/kvm/optvfault.S +++ b/trunk/arch/ia64/kvm/optvfault.S @@ -11,6 +11,7 @@ #include #include +#include #include "vti.h" #include "asm-offsets.h" @@ -140,6 +141,35 @@ GLOBAL_ENTRY(kvm_asm_mov_from_ar) ;; END(kvm_asm_mov_from_ar) +/* + * Special SGI SN2 optimized version of mov_from_ar using the SN2 RTC + * clock as it's source for emulating the ITC. This version will be + * copied on top of the original version if the host is determined to + * be an SN2. + */ +GLOBAL_ENTRY(kvm_asm_mov_from_ar_sn2) + add r18=VMM_VCPU_ITC_OFS_OFFSET, r21 + movl r19 = (KVM_VMM_BASE+(1<cpl == 0) { /* Allow hypercalls only when cpl = 0. */ if (iim == DOMN_PAL_REQUEST) { + local_irq_save(psr); set_pal_call_data(v); vmm_transition(v); get_pal_call_result(v); vcpu_increment_iip(v); + local_irq_restore(psr); return; } else if (iim == DOMN_SAL_REQUEST) { + local_irq_save(psr); set_sal_call_data(v); vmm_transition(v); get_sal_call_result(v); vcpu_increment_iip(v); + local_irq_restore(psr); return; } } diff --git a/trunk/arch/ia64/kvm/vcpu.c b/trunk/arch/ia64/kvm/vcpu.c index a18ee17b9192..a2c6c15e4761 100644 --- a/trunk/arch/ia64/kvm/vcpu.c +++ b/trunk/arch/ia64/kvm/vcpu.c @@ -788,13 +788,29 @@ void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg, setfpreg(reg, val, regs); /* FIXME: handle NATs later*/ } +/* + * The Altix RTC is mapped specially here for the vmm module + */ +#define SN_RTC_BASE (u64 *)(KVM_VMM_BASE+(1UL<arch.is_sn2) + return (*SN_RTC_BASE); + else +#endif + return ia64_getreg(_IA64_REG_AR_ITC); +} + /************************************************************************ * lsapic timer ***********************************************************************/ u64 vcpu_get_itc(struct kvm_vcpu *vcpu) { unsigned long guest_itc; - guest_itc = VMX(vcpu, itc_offset) + ia64_getreg(_IA64_REG_AR_ITC); + guest_itc = VMX(vcpu, itc_offset) + kvm_get_itc(vcpu); if (guest_itc >= VMX(vcpu, last_itc)) { VMX(vcpu, last_itc) = guest_itc; @@ -809,7 +825,7 @@ static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val) struct kvm_vcpu *v; struct kvm *kvm; int i; - long itc_offset = val - ia64_getreg(_IA64_REG_AR_ITC); + long itc_offset = val - kvm_get_itc(vcpu); unsigned long vitv = VCPU(vcpu, itv); kvm = (struct kvm *)KVM_VM_BASE; diff --git a/trunk/arch/ia64/kvm/vmm.c b/trunk/arch/ia64/kvm/vmm.c index 9eee5c04bacc..f4b4c899bb6c 100644 --- a/trunk/arch/ia64/kvm/vmm.c +++ b/trunk/arch/ia64/kvm/vmm.c @@ -30,15 +30,19 @@ MODULE_AUTHOR("Intel"); MODULE_LICENSE("GPL"); extern char kvm_ia64_ivt; +extern char kvm_asm_mov_from_ar; +extern char kvm_asm_mov_from_ar_sn2; extern fpswa_interface_t *vmm_fpswa_interface; long vmm_sanity = 1; struct kvm_vmm_info vmm_info = { - .module = THIS_MODULE, - .vmm_entry = vmm_entry, - .tramp_entry = vmm_trampoline, - .vmm_ivt = (unsigned long)&kvm_ia64_ivt, + .module = THIS_MODULE, + .vmm_entry = vmm_entry, + .tramp_entry = vmm_trampoline, + .vmm_ivt = (unsigned long)&kvm_ia64_ivt, + .patch_mov_ar = (unsigned long)&kvm_asm_mov_from_ar, + .patch_mov_ar_sn2 = (unsigned long)&kvm_asm_mov_from_ar_sn2, }; static int __init kvm_vmm_init(void) diff --git a/trunk/arch/ia64/kvm/vmm_ivt.S b/trunk/arch/ia64/kvm/vmm_ivt.S index 3ef1a017a318..40920c630649 100644 --- a/trunk/arch/ia64/kvm/vmm_ivt.S +++ b/trunk/arch/ia64/kvm/vmm_ivt.S @@ -95,7 +95,7 @@ GLOBAL_ENTRY(kvm_vmm_panic) ;; srlz.i // guarantee that interruption collection is on ;; - //(p15) ssm psr.i // restore psr.i + (p15) ssm psr.i // restore psr. addl r14=@gprel(ia64_leave_hypervisor),gp ;; KVM_SAVE_REST @@ -249,7 +249,7 @@ ENTRY(kvm_break_fault) ;; srlz.i // guarantee that interruption collection is on ;; - //(p15)ssm psr.i // restore psr.i + (p15)ssm psr.i // restore psr.i addl r14=@gprel(ia64_leave_hypervisor),gp ;; KVM_SAVE_REST @@ -439,7 +439,7 @@ kvm_dispatch_vexirq: ;; srlz.i // guarantee that interruption collection is on ;; - //(p15) ssm psr.i // restore psr.i + (p15) ssm psr.i // restore psr.i adds r3=8,r2 // set up second base pointer ;; KVM_SAVE_REST @@ -819,7 +819,7 @@ ENTRY(kvm_dtlb_miss_dispatch) ;; srlz.i // guarantee that interruption collection is on ;; - //(p15) ssm psr.i // restore psr.i + (p15) ssm psr.i // restore psr.i addl r14=@gprel(ia64_leave_hypervisor_prepare),gp ;; KVM_SAVE_REST @@ -842,7 +842,7 @@ ENTRY(kvm_itlb_miss_dispatch) ;; srlz.i // guarantee that interruption collection is on ;; - //(p15) ssm psr.i // restore psr.i + (p15) ssm psr.i // restore psr.i addl r14=@gprel(ia64_leave_hypervisor),gp ;; KVM_SAVE_REST @@ -871,7 +871,7 @@ ENTRY(kvm_dispatch_reflection) ;; srlz.i // guarantee that interruption collection is on ;; - //(p15) ssm psr.i // restore psr.i + (p15) ssm psr.i // restore psr.i addl r14=@gprel(ia64_leave_hypervisor),gp ;; KVM_SAVE_REST @@ -898,7 +898,7 @@ ENTRY(kvm_dispatch_virtualization_fault) ;; srlz.i // guarantee that interruption collection is on ;; - //(p15) ssm psr.i // restore psr.i + (p15) ssm psr.i // restore psr.i addl r14=@gprel(ia64_leave_hypervisor_prepare),gp ;; KVM_SAVE_REST @@ -920,7 +920,7 @@ ENTRY(kvm_dispatch_interrupt) ;; srlz.i ;; - //(p15) ssm psr.i + (p15) ssm psr.i addl r14=@gprel(ia64_leave_hypervisor),gp ;; KVM_SAVE_REST @@ -1333,7 +1333,7 @@ hostret = r24 ;; (p7) srlz.i ;; -//(p6) ssm psr.i +(p6) ssm psr.i ;; mov rp=rpsave mov ar.pfs=pfssave diff --git a/trunk/arch/ia64/kvm/vtlb.c b/trunk/arch/ia64/kvm/vtlb.c index 2c2501f13159..4290a429bf7c 100644 --- a/trunk/arch/ia64/kvm/vtlb.c +++ b/trunk/arch/ia64/kvm/vtlb.c @@ -254,7 +254,8 @@ u64 guest_vhpt_lookup(u64 iha, u64 *pte) "(p7) st8 [%2]=r9;;" "ssm psr.ic;;" "srlz.d;;" - /* "ssm psr.i;;" Once interrupts in vmm open, need fix*/ + "ssm psr.i;;" + "srlz.d;;" : "=r"(ret) : "r"(iha), "r"(pte):"memory"); return ret; diff --git a/trunk/arch/ia64/mm/extable.c b/trunk/arch/ia64/mm/extable.c index 71c50dd8f870..e95d5ad9285d 100644 --- a/trunk/arch/ia64/mm/extable.c +++ b/trunk/arch/ia64/mm/extable.c @@ -53,6 +53,32 @@ void sort_extable (struct exception_table_entry *start, cmp_ex, swap_ex); } +static inline unsigned long ex_to_addr(const struct exception_table_entry *x) +{ + return (unsigned long)&x->insn + x->insn; +} + +#ifdef CONFIG_MODULES +/* + * Any entry referring to the module init will be at the beginning or + * the end. + */ +void trim_init_extable(struct module *m) +{ + /*trim the beginning*/ + while (m->num_exentries && + within_module_init(ex_to_addr(&m->extable[0]), m)) { + m->extable++; + m->num_exentries--; + } + /*trim the end*/ + while (m->num_exentries && + within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]), + m)) + m->num_exentries--; +} +#endif /* CONFIG_MODULES */ + const struct exception_table_entry * search_extable (const struct exception_table_entry *first, const struct exception_table_entry *last, diff --git a/trunk/arch/ia64/sn/kernel/irq.c b/trunk/arch/ia64/sn/kernel/irq.c index 66fd705e82c0..764f26abac05 100644 --- a/trunk/arch/ia64/sn/kernel/irq.c +++ b/trunk/arch/ia64/sn/kernel/irq.c @@ -227,7 +227,7 @@ struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *sn_irq_info, return new_irq_info; } -static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask) +static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask) { struct sn_irq_info *sn_irq_info, *sn_irq_info_safe; nasid_t nasid; @@ -239,6 +239,8 @@ static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask) list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe, sn_irq_lh[irq], list) (void)sn_retarget_vector(sn_irq_info, nasid, slice); + + return 0; } #ifdef CONFIG_SMP diff --git a/trunk/arch/ia64/sn/kernel/msi_sn.c b/trunk/arch/ia64/sn/kernel/msi_sn.c index 81e428943d73..fbbfb9701201 100644 --- a/trunk/arch/ia64/sn/kernel/msi_sn.c +++ b/trunk/arch/ia64/sn/kernel/msi_sn.c @@ -151,7 +151,7 @@ int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry) } #ifdef CONFIG_SMP -static void sn_set_msi_irq_affinity(unsigned int irq, +static int sn_set_msi_irq_affinity(unsigned int irq, const struct cpumask *cpu_mask) { struct msi_msg msg; @@ -168,7 +168,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq, cpu = cpumask_first(cpu_mask); sn_irq_info = sn_msi_info[irq].sn_irq_info; if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) - return; + return -1; /* * Release XIO resources for the old MSI PCI address @@ -189,7 +189,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq, new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice); sn_msi_info[irq].sn_irq_info = new_irq_info; if (new_irq_info == NULL) - return; + return -1; /* * Map the xio address into bus space @@ -206,6 +206,8 @@ static void sn_set_msi_irq_affinity(unsigned int irq, write_msi_msg(irq, &msg); cpumask_copy(irq_desc[irq].affinity, cpu_mask); + + return 0; } #endif /* CONFIG_SMP */ diff --git a/trunk/arch/ia64/xen/xensetup.S b/trunk/arch/ia64/xen/xensetup.S index 28fed1fcc079..aff8346ea193 100644 --- a/trunk/arch/ia64/xen/xensetup.S +++ b/trunk/arch/ia64/xen/xensetup.S @@ -54,8 +54,6 @@ END(startup_xen) #define isBP p3 // are we the Bootstrap Processor? - .text - GLOBAL_ENTRY(xen_setup_hook) mov r8=XEN_PV_DOMAIN_ASM (isBP) movl r9=xen_domain_type;; diff --git a/trunk/arch/m32r/boot/compressed/Makefile b/trunk/arch/m32r/boot/compressed/Makefile index d908e1d3c07f..560484ae35ec 100644 --- a/trunk/arch/m32r/boot/compressed/Makefile +++ b/trunk/arch/m32r/boot/compressed/Makefile @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ piggy.o vmlinux.lds -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head.o $(obj)/misc.o diff --git a/trunk/arch/m32r/include/asm/assembler.h b/trunk/arch/m32r/include/asm/assembler.h index 26351539b5ff..728799fc70aa 100644 --- a/trunk/arch/m32r/include/asm/assembler.h +++ b/trunk/arch/m32r/include/asm/assembler.h @@ -9,14 +9,15 @@ * This file contains M32R architecture specific macro definitions. */ +#include + +#undef __STR -#ifndef __STR #ifdef __ASSEMBLY__ #define __STR(x) x #else -#define __STR(x) #x +#define __STR(x) __stringify(x) #endif -#endif /* __STR */ #ifdef CONFIG_SMP #define M32R_LOCK __STR(lock) diff --git a/trunk/arch/m32r/include/asm/flat.h b/trunk/arch/m32r/include/asm/flat.h index d851cf0c4aa5..5d711c4688fb 100644 --- a/trunk/arch/m32r/include/asm/flat.h +++ b/trunk/arch/m32r/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_M32R_FLAT_H #define __ASM_M32R_FLAT_H -#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_set_persistent(relval, p) 0 diff --git a/trunk/arch/m32r/kernel/Makefile b/trunk/arch/m32r/kernel/Makefile index 09200d4886e3..b1a4b6036591 100644 --- a/trunk/arch/m32r/kernel/Makefile +++ b/trunk/arch/m32r/kernel/Makefile @@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_MODULES) += module.o - -EXTRA_AFLAGS := -traditional diff --git a/trunk/arch/m32r/kernel/head.S b/trunk/arch/m32r/kernel/head.S index 90916067b9c1..0a7194439eb1 100644 --- a/trunk/arch/m32r/kernel/head.S +++ b/trunk/arch/m32r/kernel/head.S @@ -23,7 +23,7 @@ __INITDATA /* * References to members of the boot_cpu_data structure. */ -.section .text.head, "ax" +__HEAD .global start_kernel .global __bss_start .global _end diff --git a/trunk/arch/m32r/kernel/module.c b/trunk/arch/m32r/kernel/module.c index 8d4205794380..cb5f37d78d49 100644 --- a/trunk/arch/m32r/kernel/module.c +++ b/trunk/arch/m32r/kernel/module.c @@ -44,8 +44,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } /* We don't need anything special. */ diff --git a/trunk/arch/m32r/kernel/vmlinux.lds.S b/trunk/arch/m32r/kernel/vmlinux.lds.S index 9db05df20c0e..4179adf6c624 100644 --- a/trunk/arch/m32r/kernel/vmlinux.lds.S +++ b/trunk/arch/m32r/kernel/vmlinux.lds.S @@ -27,7 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/trunk/arch/m68k/configs/amiga_defconfig b/trunk/arch/m68k/configs/amiga_defconfig index 23597beb66c1..0f69fa5ddf26 100644 --- a/trunk/arch/m68k/configs/amiga_defconfig +++ b/trunk/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:42 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:52 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -157,7 +169,7 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -# CONFIG_HEARTBEAT is not set +CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y @@ -184,7 +196,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -258,6 +273,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +282,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +293,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +372,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +407,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +421,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,15 +468,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -469,7 +489,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -478,7 +497,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y # CONFIG_BLK_DEV_IDEDMA is not set @@ -530,6 +548,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -547,6 +567,7 @@ CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -554,7 +575,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -567,6 +588,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -577,14 +599,16 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -609,7 +633,10 @@ CONFIG_APNE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -719,7 +746,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -730,6 +757,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -821,6 +849,7 @@ CONFIG_FB_FM2=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -856,7 +885,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -867,14 +895,13 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m -# CONFIG_SERIAL_CONSOLE is not set +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -883,6 +910,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -909,13 +937,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -923,6 +953,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -935,8 +970,8 @@ CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -954,10 +989,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -966,6 +998,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -976,23 +1011,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1067,11 +1103,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1092,13 +1123,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1113,7 +1152,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1132,7 +1171,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1154,7 +1193,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1168,6 +1207,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1175,11 +1215,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1191,10 +1233,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/apollo_defconfig b/trunk/arch/m68k/configs/apollo_defconfig index 935108d115a0..5fff58196b3e 100644 --- a/trunk/arch/m68k/configs/apollo_defconfig +++ b/trunk/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:43 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:54 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -256,6 +268,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -264,6 +277,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -274,6 +288,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -352,25 +367,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -392,8 +402,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -404,8 +416,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,9 +453,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -491,8 +507,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -538,7 +560,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -596,7 +621,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -636,6 +660,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB_APOLLO=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -774,6 +799,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -800,13 +826,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -814,6 +842,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -845,10 +878,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -857,6 +887,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -867,6 +900,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -883,7 +917,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -958,11 +991,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -983,13 +1011,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1059,6 +1095,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1066,11 +1103,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1082,10 +1121,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/atari_defconfig b/trunk/arch/m68k/configs/atari_defconfig index a594a1d47b62..d92a90e03ecb 100644 --- a/trunk/arch/m68k/configs/atari_defconfig +++ b/trunk/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:44 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:56 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -180,7 +192,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -254,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -262,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -272,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -350,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -390,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -402,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,15 +460,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -461,7 +481,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,11 +535,14 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATARI_SCSI=y # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set # CONFIG_ATARI_SCSI_RESET_BOOT is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -528,7 +550,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -541,6 +563,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -550,7 +573,9 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -568,7 +593,10 @@ CONFIG_ATARILANCE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -625,11 +653,10 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_ATARI_KBD_CORE=y CONFIG_KEYBOARD_ATARI=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -649,7 +676,7 @@ CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -673,6 +700,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -760,6 +788,7 @@ CONFIG_FB_ATARI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -794,7 +823,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -805,14 +833,14 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -821,6 +849,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -847,13 +876,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -861,6 +892,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -892,10 +928,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -904,6 +937,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -914,22 +950,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set +CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1004,11 +1042,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1029,13 +1062,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1050,7 +1091,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1069,7 +1110,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1091,7 +1132,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1105,6 +1146,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1112,11 +1154,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1128,10 +1172,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/bvme6000_defconfig b/trunk/arch/m68k/configs/bvme6000_defconfig index d3d9814a91de..6e6b1aa66682 100644 --- a/trunk/arch/m68k/configs/bvme6000_defconfig +++ b/trunk/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:45 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:59 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_BVME6000_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_BVME6000_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_BVME6000_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -742,6 +766,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -768,13 +793,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -782,6 +809,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -813,10 +845,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -825,6 +854,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -835,6 +867,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -851,7 +884,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -927,11 +959,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -952,13 +979,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1028,6 +1063,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1035,11 +1071,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=m +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1051,10 +1089,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/hp300_defconfig b/trunk/arch/m68k/configs/hp300_defconfig index 5556ef088d04..bc0565f63a15 100644 --- a/trunk/arch/m68k/configs/hp300_defconfig +++ b/trunk/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:46 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:01 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -141,12 +152,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -257,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -265,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -275,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -353,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -393,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -405,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,9 +454,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -492,8 +508,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -501,7 +520,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -514,6 +533,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -524,6 +544,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_HPLANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -540,7 +562,10 @@ CONFIG_HPLANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -646,6 +670,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -728,6 +753,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -759,7 +785,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -767,9 +792,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -782,6 +807,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -808,13 +834,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -822,6 +850,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -853,10 +886,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -865,6 +895,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -875,6 +908,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -891,7 +925,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -966,11 +999,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -991,13 +1019,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1067,6 +1103,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1074,11 +1111,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1090,10 +1129,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/mac_defconfig b/trunk/arch/m68k/configs/mac_defconfig index c6de25724a25..9991b64fea57 100644 --- a/trunk/arch/m68k/configs/mac_defconfig +++ b/trunk/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:47 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:03 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -142,12 +153,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -429,6 +441,7 @@ CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_SWIM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -443,15 +456,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -459,7 +477,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -514,10 +531,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -525,7 +545,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +567,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -561,6 +582,8 @@ CONFIG_MAC89x0=m CONFIG_MACSONIC=m CONFIG_MACMACE=y # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -577,7 +600,10 @@ CONFIG_MACMACE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -635,7 +661,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -677,6 +702,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -760,6 +786,7 @@ CONFIG_FB_MAC=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -793,7 +820,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -801,9 +827,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -819,6 +845,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -845,13 +872,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -859,6 +888,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -890,10 +924,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -902,6 +933,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -912,6 +946,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -927,7 +962,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1003,11 +1037,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1028,13 +1057,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1104,6 +1141,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1111,11 +1149,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1127,10 +1167,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/multi_defconfig b/trunk/arch/m68k/configs/multi_defconfig index 70693588031e..69c43e2d8b45 100644 --- a/trunk/arch/m68k/configs/multi_defconfig +++ b/trunk/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:48 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:06 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -146,12 +157,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -268,6 +280,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -276,6 +289,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -286,6 +300,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -364,25 +379,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -408,8 +418,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -420,8 +432,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +466,7 @@ CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y +CONFIG_BLK_DEV_SWIM=y CONFIG_AMIGA_Z2RAM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -469,15 +482,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -485,7 +503,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -494,7 +511,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_BLK_DEV_MAC_IDE=y @@ -549,6 +565,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -575,6 +593,7 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -582,7 +601,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -604,6 +623,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -614,24 +634,26 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m +CONFIG_MAC89x0=y +CONFIG_MACSONIC=y CONFIG_MACMACE=y CONFIG_MVME147_NET=y CONFIG_MVME16x_NET=y CONFIG_BVME6000_NET=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -657,7 +679,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -717,11 +742,10 @@ CONFIG_KEYBOARD_ATARI=y CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -732,7 +756,7 @@ CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m # CONFIG_MOUSE_VSXXXAA is not set -CONFIG_MOUSE_HIL=m +CONFIG_MOUSE_HIL=y CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set @@ -763,18 +787,18 @@ CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_INPUT_UINPUT is not set -CONFIG_HP_SDC_RTC=m +CONFIG_HP_SDC_RTC=y # # Hardware I/O ports # CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y # CONFIG_SERIO_PARKBD is not set CONFIG_HP_SDC=y CONFIG_HIL_MLC=y -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -788,7 +812,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -799,6 +823,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -807,7 +832,7 @@ CONFIG_PRINTER=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=m +CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -898,6 +923,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -937,7 +963,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -948,13 +973,12 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m @@ -974,6 +998,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1000,13 +1025,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -1014,6 +1041,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1045,10 +1077,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -1057,6 +1086,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -1067,6 +1099,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1083,7 +1116,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1163,11 +1195,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1188,13 +1215,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1264,6 +1299,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1271,11 +1307,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1287,10 +1325,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/mvme147_defconfig b/trunk/arch/m68k/configs/mvme147_defconfig index 52d42715bd0b..7dceb5d71223 100644 --- a/trunk/arch/m68k/configs/mvme147_defconfig +++ b/trunk/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:50 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:08 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,9 +509,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MVME147_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -503,7 +522,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -516,6 +535,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -526,6 +546,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME147_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -542,7 +564,10 @@ CONFIG_MVME147_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -640,6 +664,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -716,7 +741,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -724,9 +748,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -741,6 +765,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -767,13 +792,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -781,6 +808,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -812,10 +844,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -824,6 +853,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -834,6 +866,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -850,7 +883,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -926,11 +958,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -951,13 +978,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1027,6 +1062,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1034,11 +1070,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1050,10 +1088,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/mvme16x_defconfig b/trunk/arch/m68k/configs/mvme16x_defconfig index 3403ed2eda79..890594fcacb3 100644 --- a/trunk/arch/m68k/configs/mvme16x_defconfig +++ b/trunk/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:51 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:10 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_MVME16x_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME16x_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_MVME16x_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -743,6 +767,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -769,13 +794,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -783,6 +810,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -814,10 +846,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -826,6 +855,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -836,6 +868,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -852,7 +885,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -928,11 +960,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -953,13 +980,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1029,6 +1064,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1036,11 +1072,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1052,10 +1090,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/q40_defconfig b/trunk/arch/m68k/configs/q40_defconfig index 3459c594194b..7cf58c27ff84 100644 --- a/trunk/arch/m68k/configs/q40_defconfig +++ b/trunk/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:52 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:13 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,15 +453,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -457,7 +474,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,6 +532,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -527,6 +545,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -534,7 +553,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +566,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -559,7 +579,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -584,7 +606,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -642,7 +667,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -688,6 +712,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -771,6 +796,7 @@ CONFIG_FB_Q40=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -805,7 +831,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -813,9 +838,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -828,6 +853,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -854,13 +880,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -868,6 +896,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -899,10 +932,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -911,6 +941,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -921,6 +954,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -936,7 +970,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1011,11 +1044,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1036,13 +1064,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1112,6 +1148,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1119,11 +1156,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1135,10 +1174,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/sun3_defconfig b/trunk/arch/m68k/configs/sun3_defconfig index f404917429fa..f27c1a47bacf 100644 --- a/trunk/arch/m68k/configs/sun3_defconfig +++ b/trunk/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:53 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:16 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -138,12 +149,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -253,6 +265,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -261,6 +274,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -271,6 +285,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -349,25 +364,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -389,8 +399,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -401,8 +413,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -438,9 +450,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -488,9 +504,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -498,7 +517,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -511,6 +530,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y CONFIG_SUN3_82586=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -537,7 +559,10 @@ CONFIG_SUN3_82586=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -595,7 +620,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -635,6 +659,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -710,6 +735,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -741,16 +767,15 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -763,6 +788,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -789,13 +815,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -803,6 +831,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -834,10 +867,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -846,6 +876,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -856,6 +889,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -872,7 +906,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -948,11 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -973,13 +1001,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1049,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1056,11 +1093,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1072,9 +1111,12 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/configs/sun3x_defconfig b/trunk/arch/m68k/configs/sun3x_defconfig index 4d8a1e84e39f..c40edb919fda 100644 --- a/trunk/arch/m68k/configs/sun3x_defconfig +++ b/trunk/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:54 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:20 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -440,9 +452,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,9 +506,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -523,6 +543,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -539,7 +561,10 @@ CONFIG_SUN3LANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -597,7 +622,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -637,6 +661,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -772,6 +797,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -798,13 +824,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -812,6 +840,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -843,10 +876,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -855,6 +885,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -865,6 +898,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -881,7 +915,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -957,11 +990,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -982,13 +1010,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1058,6 +1094,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1065,11 +1102,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1081,10 +1120,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68k/include/asm/flat.h b/trunk/arch/m68k/include/asm/flat.h index 814b5174a8e0..a0e290793978 100644 --- a/trunk/arch/m68k/include/asm/flat.h +++ b/trunk/arch/m68k/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __M68KNOMMU_FLAT_H__ #define __M68KNOMMU_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/trunk/arch/m68k/include/asm/m520xsim.h b/trunk/arch/m68k/include/asm/m520xsim.h index 49d016e6391a..83bbcfd6e8f2 100644 --- a/trunk/arch/m68k/include/asm/m520xsim.h +++ b/trunk/arch/m68k/include/asm/m520xsim.h @@ -59,5 +59,14 @@ #define MCFPIT_IMR MCFINTC_IMRL #define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) +/* + * Reset Controll Unit. + */ +#define MCF_RCR 0xFC0A0000 +#define MCF_RSR 0xFC0A0001 + +#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ +#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ + /****************************************************************************/ #endif /* m520xsim_h */ diff --git a/trunk/arch/m68k/include/asm/m523xsim.h b/trunk/arch/m68k/include/asm/m523xsim.h index bf397313e93f..55183b5df1b8 100644 --- a/trunk/arch/m68k/include/asm/m523xsim.h +++ b/trunk/arch/m68k/include/asm/m523xsim.h @@ -41,5 +41,14 @@ #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ +/* + * Reset Controll Unit (relative to IPSBAR). + */ +#define MCF_RCR 0x110000 +#define MCF_RSR 0x110001 + +#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ +#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ + /****************************************************************************/ #endif /* m523xsim_h */ diff --git a/trunk/arch/m68k/include/asm/m527xsim.h b/trunk/arch/m68k/include/asm/m527xsim.h index 1f63ab3fb3e6..95f4f8ee8f7c 100644 --- a/trunk/arch/m68k/include/asm/m527xsim.h +++ b/trunk/arch/m68k/include/asm/m527xsim.h @@ -70,5 +70,14 @@ #define UART2_ENABLE_MASK 0x3f00 #endif +/* + * Reset Controll Unit (relative to IPSBAR). + */ +#define MCF_RCR 0x110000 +#define MCF_RSR 0x110001 + +#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ +#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ + /****************************************************************************/ #endif /* m527xsim_h */ diff --git a/trunk/arch/m68k/include/asm/m528xsim.h b/trunk/arch/m68k/include/asm/m528xsim.h index 28bf783a5d6d..d79c49f8134a 100644 --- a/trunk/arch/m68k/include/asm/m528xsim.h +++ b/trunk/arch/m68k/include/asm/m528xsim.h @@ -56,6 +56,14 @@ #define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) +/* + * Reset Control Unit (relative to IPSBAR). + */ +#define MCF_RCR 0x110000 +#define MCF_RSR 0x110001 + +#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ +#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ /********************************************************************* * diff --git a/trunk/arch/m68k/include/asm/m532xsim.h b/trunk/arch/m68k/include/asm/m532xsim.h index ce603451b55e..eb7fd4448947 100644 --- a/trunk/arch/m68k/include/asm/m532xsim.h +++ b/trunk/arch/m68k/include/asm/m532xsim.h @@ -125,6 +125,18 @@ #define ACR_CM_OFF_IMP (3<<5) #define ACR_WPROTECT (1<<2) +/********************************************************************* + * + * Reset Controller Module + * + *********************************************************************/ + +#define MCF_RCR 0xFC0A0000 +#define MCF_RSR 0xFC0A0001 + +#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ +#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ + /********************************************************************* * * Inter-IC (I2C) Module diff --git a/trunk/arch/m68k/include/asm/processor_no.h b/trunk/arch/m68k/include/asm/processor_no.h index 91cba18acdd3..7a1e0ba35f5a 100644 --- a/trunk/arch/m68k/include/asm/processor_no.h +++ b/trunk/arch/m68k/include/asm/processor_no.h @@ -72,10 +72,10 @@ struct thread_struct { unsigned char fpstate[FPSTATESIZE]; /* floating point state */ }; -#define INIT_THREAD { \ - sizeof(init_stack) + (unsigned long) init_stack, 0, \ - PS_S, __KERNEL_DS, \ - {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \ +#define INIT_THREAD { \ + .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ + .sr = PS_S, \ + .fs = __KERNEL_DS, \ } /* diff --git a/trunk/arch/m68k/include/asm/swab.h b/trunk/arch/m68k/include/asm/swab.h index 9e3054ea59e9..5b754aace744 100644 --- a/trunk/arch/m68k/include/asm/swab.h +++ b/trunk/arch/m68k/include/asm/swab.h @@ -1,7 +1,7 @@ #ifndef _M68K_SWAB_H #define _M68K_SWAB_H -#include +#include #include #define __SWAB_64_THRU_32__ diff --git a/trunk/arch/m68k/include/asm/system_no.h b/trunk/arch/m68k/include/asm/system_no.h index 4496c0aa8379..3c0718d74398 100644 --- a/trunk/arch/m68k/include/asm/system_no.h +++ b/trunk/arch/m68k/include/asm/system_no.h @@ -203,113 +203,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz #include #endif -#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \ - defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 ) -#define HARD_RESET_NOW() ({ \ - local_irq_disable(); \ - asm(" \ - moveal #0x10c00000, %a0; \ - moveb #0, 0xFFFFF300; \ - moveal 0(%a0), %sp; \ - moveal 4(%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif - -#ifdef CONFIG_COLDFIRE -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -/* - * Need to account for broken early mask of 5272 silicon. So don't - * jump through the original start address. Jump strait into the - * known start of the FLASH code. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - jmp 0xf0000400; \ - "); \ -}) -#elif defined(CONFIG_NETtel) || \ - defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x10000044, %a0; \ - movel #0xffffffff, (%a0); \ - moveal #0x10000001, %a0; \ - moveb #0x00, (%a0); \ - moveal #0xf0000004, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#elif defined(CONFIG_M5272) -/* - * Retrieve the boot address in flash using CSBR0 and CSOR0 - * find the reset vector at flash_address + 4 (e.g. 0x400) - * remap it in the flash's current location (e.g. 0xf0000400) - * and jump there. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %%sr; \ - move.l %0+0x40,%%d0; \ - and.l %0+0x44,%%d0; \ - andi.l #0xfffff000,%%d0; \ - mov.l %%d0,%%a0; \ - or.l 4(%%a0),%%d0; \ - mov.l %%d0,%%a0; \ - jmp (%%a0);" \ - : /* No output */ \ - : "o" (*(char *)MCF_MBAR) ); \ -}) -#elif defined(CONFIG_M528x) -/* - * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR), - * that when set, resets the MCF528x. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \ - while(1) \ - *reset |= (0x01 << 7);\ -}) -#elif defined(CONFIG_M523x) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - movel #0x01000000, %sp; \ - moveal #0x40110000, %a0; \ - moveb #0x80, (%a0); \ - "); \ -}) -#elif defined(CONFIG_M520x) - /* - * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register - * RCR), that when set, resets the MCF5208. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \ - while(1) \ - *reset |= 0x80; \ -}) -#else -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x4, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif -#endif #define arch_align_stack(x) (x) diff --git a/trunk/arch/m68k/include/asm/unistd.h b/trunk/arch/m68k/include/asm/unistd.h index 3c19027331fa..aa29a8640f74 100644 --- a/trunk/arch/m68k/include/asm/unistd.h +++ b/trunk/arch/m68k/include/asm/unistd.h @@ -332,10 +332,12 @@ #define __NR_dup3 326 #define __NR_pipe2 327 #define __NR_inotify_init1 328 +#define __NR_preadv 329 +#define __NR_pwritev 330 #ifdef __KERNEL__ -#define NR_syscalls 329 +#define NR_syscalls 331 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/trunk/arch/m68k/kernel/entry.S b/trunk/arch/m68k/kernel/entry.S index 5c332f2b9b83..8744f60c07a9 100644 --- a/trunk/arch/m68k/kernel/entry.S +++ b/trunk/arch/m68k/kernel/entry.S @@ -753,4 +753,6 @@ sys_call_table: .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ diff --git a/trunk/arch/m68k/kernel/head.S b/trunk/arch/m68k/kernel/head.S index f513f530de91..86edb5fbcfc3 100644 --- a/trunk/arch/m68k/kernel/head.S +++ b/trunk/arch/m68k/kernel/head.S @@ -577,7 +577,7 @@ func_define putn,1 #endif .endm -.section ".text.head","ax" +__HEAD ENTRY(_stext) /* * Version numbers of the bootinfo interface diff --git a/trunk/arch/m68k/kernel/module.c b/trunk/arch/m68k/kernel/module.c index 774862bc6977..cd6bcb1c957e 100644 --- a/trunk/arch/m68k/kernel/module.c +++ b/trunk/arch/m68k/kernel/module.c @@ -31,8 +31,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } /* We don't need anything special. */ diff --git a/trunk/arch/m68k/kernel/sun3-head.S b/trunk/arch/m68k/kernel/sun3-head.S index aad01592dbbc..43036bf4aeed 100644 --- a/trunk/arch/m68k/kernel/sun3-head.S +++ b/trunk/arch/m68k/kernel/sun3-head.S @@ -1,4 +1,5 @@ #include +#include #include #include @@ -29,7 +30,7 @@ kernel_pmd_table: .skip 0x2000 .globl kernel_pg_dir .equ kernel_pg_dir,kernel_pmd_table - .section .text.head + __HEAD ENTRY(_stext) ENTRY(_start) diff --git a/trunk/arch/m68k/kernel/vmlinux-std.lds b/trunk/arch/m68k/kernel/vmlinux-std.lds index f846d4e3e5e1..01d212bb05a6 100644 --- a/trunk/arch/m68k/kernel/vmlinux-std.lds +++ b/trunk/arch/m68k/kernel/vmlinux-std.lds @@ -12,7 +12,7 @@ SECTIONS . = 0x1000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/trunk/arch/m68k/kernel/vmlinux-sun3.lds b/trunk/arch/m68k/kernel/vmlinux-sun3.lds index d9368c0709ba..c192f773db96 100644 --- a/trunk/arch/m68k/kernel/vmlinux-sun3.lds +++ b/trunk/arch/m68k/kernel/vmlinux-sun3.lds @@ -12,7 +12,7 @@ SECTIONS . = 0xE002000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/trunk/arch/m68knommu/Kconfig b/trunk/arch/m68knommu/Kconfig index 4beb59dfc6ec..534376299a99 100644 --- a/trunk/arch/m68knommu/Kconfig +++ b/trunk/arch/m68knommu/Kconfig @@ -16,6 +16,7 @@ config MMU config NO_DMA bool + depends on !COLDFIRE default y config FPU diff --git a/trunk/arch/m68knommu/configs/m5208evb_defconfig b/trunk/arch/m68knommu/configs/m5208evb_defconfig index 6fae33a05e2a..854a4f333b2f 100644 --- a/trunk/arch/m68knommu/configs/m5208evb_defconfig +++ b/trunk/arch/m68knommu/configs/m5208evb_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,53 +34,55 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -93,7 +96,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -145,44 +148,39 @@ CONFIG_RAM16BIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -223,6 +221,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -232,7 +231,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -243,14 +244,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -289,10 +284,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -303,10 +296,6 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -315,7 +304,6 @@ CONFIG_MTD_RAM=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -336,6 +324,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -351,6 +344,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -364,7 +358,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -374,10 +368,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y # CONFIG_FEC2 is not set @@ -389,8 +388,10 @@ CONFIG_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -415,7 +416,7 @@ CONFIG_FEC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -428,7 +429,6 @@ CONFIG_FEC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=115200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -447,19 +447,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -470,11 +474,12 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -488,10 +493,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -499,7 +500,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -507,11 +511,13 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -519,6 +525,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -540,10 +551,7 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -553,13 +561,20 @@ CONFIG_PROC_SYSCTL=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -581,10 +596,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -592,19 +611,23 @@ CONFIG_FULLDEBUG=y # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68knommu/configs/m5249evb_defconfig b/trunk/arch/m68knommu/configs/m5249evb_defconfig index cc6458333d67..2efba32e33a0 100644 --- a/trunk/arch/m68knommu/configs/m5249evb_defconfig +++ b/trunk/arch/m68knommu/configs/m5249evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:32:41 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -29,11 +31,23 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -41,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -92,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -144,45 +151,103 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -194,6 +259,7 @@ CONFIG_BINFMT_FLAT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -258,6 +324,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -266,14 +337,15 @@ CONFIG_MTD_UCLINUX=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -285,6 +357,56 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -302,7 +424,7 @@ CONFIG_HAVE_IDE=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -315,7 +437,6 @@ CONFIG_HAVE_IDE=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -323,7 +444,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -334,19 +456,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -356,11 +482,13 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -374,10 +502,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -385,7 +509,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -393,18 +520,27 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -427,10 +563,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -440,13 +573,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -454,6 +595,7 @@ CONFIG_ROMFS_FS=y # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -468,10 +610,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -480,18 +626,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/arm/configs/mx31moboard_defconfig b/trunk/arch/m68knommu/configs/m5272c3_defconfig similarity index 52% rename from trunk/arch/arm/configs/mx31moboard_defconfig rename to trunk/arch/m68knommu/configs/m5272c3_defconfig index e90f86d6deef..f37852a34218 100644 --- a/trunk/arch/arm/configs/mx31moboard_defconfig +++ b/trunk/arch/m68knommu/configs/m5272c3_defconfig @@ -1,32 +1,25 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:17:30 2009 # -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_M68K=y +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_NO_IOPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,84 +27,63 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y +# CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,172 +91,102 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y -# CONFIG_MXC_IRQ_PRIOR is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# Processor type and features +# +# CONFIG_M68328 is not set +# CONFIG_M68EZ328 is not set +# CONFIG_M68VZ328 is not set +# CONFIG_M68360 is not set +# CONFIG_M5206 is not set +# CONFIG_M5206e is not set +# CONFIG_M520x is not set +# CONFIG_M523x is not set +# CONFIG_M5249 is not set +# CONFIG_M5271 is not set +CONFIG_M5272=y +# CONFIG_M5275 is not set +# CONFIG_M528x is not set +# CONFIG_M5307 is not set +# CONFIG_M532x is not set +# CONFIG_M5407 is not set +CONFIG_COLDFIRE=y +CONFIG_CLOCK_SET=y +CONFIG_CLOCK_FREQ=66666666 +CONFIG_CLOCK_DIV=1 + +# +# Platform +# +# CONFIG_UC5272 is not set +CONFIG_M5272C3=y +# CONFIG_COBRA5272 is not set +# CONFIG_CANCam is not set +# CONFIG_SCALES is not set +# CONFIG_NETtel is not set +# CONFIG_CPU16B is not set +# CONFIG_MOD5272 is not set +CONFIG_FREESCALE=y +CONFIG_4KSTACKS=y +CONFIG_HZ=100 # -# Bus support +# RAM configuration # -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set +CONFIG_RAMBASE=0x00000000 +CONFIG_RAMSIZE=0x00800000 +CONFIG_VECTORBASE=0x00000000 +CONFIG_KERNELBASE=0x00020000 +CONFIG_RAMAUTOBIT=y +# CONFIG_RAM8BIT is not set +# CONFIG_RAM16BIT is not set +# CONFIG_RAM32BIT is not set # -# Kernel Features +# ROM configuration # -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ROM is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y +# CONFIG_UNEVICTABLE_LRU is not set # -# Userspace binary formats +# Executable file formats # -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # @@ -298,10 +200,7 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -328,6 +227,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -337,7 +237,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -348,14 +250,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,24 +262,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # @@ -402,43 +290,27 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set +CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set # @@ -458,12 +330,27 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -475,9 +362,9 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -486,15 +373,19 @@ CONFIG_NETDEVICES=y # CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -503,7 +394,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -511,6 +405,7 @@ CONFIG_SMC91X=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -538,44 +433,34 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_MCF=y +CONFIG_SERIAL_MCF_BAUDRATE=19200 +CONFIG_SERIAL_MCF_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -583,12 +468,9 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -604,7 +486,7 @@ CONFIG_SSB_POSSIBLE=y # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -621,39 +503,41 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -673,14 +557,10 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -688,42 +568,23 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -737,8 +598,8 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -747,34 +608,31 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_DEBUG_USER is not set +# CONFIG_FULLDEBUG is not set +# CONFIG_HIGHPROFILE is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" +# CONFIG_NO_KERNEL_MSG is not set +# CONFIG_BDM_DISABLE is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -782,9 +640,6 @@ CONFIG_BITREVERSE=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68knommu/configs/m5275evb_defconfig b/trunk/arch/m68knommu/configs/m5275evb_defconfig index 0d1256f5addb..dc5c621d419c 100644 --- a/trunk/arch/m68knommu/configs/m5275evb_defconfig +++ b/trunk/arch/m68knommu/configs/m5275evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 23:29:01 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -148,44 +152,39 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -226,6 +225,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -235,7 +235,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -246,14 +248,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -332,6 +328,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -347,6 +348,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -360,7 +362,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -370,10 +372,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y CONFIG_FEC2=y @@ -385,8 +392,10 @@ CONFIG_FEC2=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -421,7 +430,7 @@ CONFIG_SLHC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -434,7 +443,6 @@ CONFIG_SLHC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -442,7 +450,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -453,19 +462,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -476,6 +489,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -494,10 +508,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -505,7 +515,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -513,12 +526,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -526,6 +541,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -548,10 +568,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -561,21 +578,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -598,10 +615,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -610,18 +631,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68knommu/configs/m5307c3_defconfig b/trunk/arch/m68knommu/configs/m5307c3_defconfig index fe2acdfa4d76..3a3f6733ae43 100644 --- a/trunk/arch/m68knommu/configs/m5307c3_defconfig +++ b/trunk/arch/m68knommu/configs/m5307c3_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +34,21 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +56,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +100,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -127,12 +132,11 @@ CONFIG_CLOCK_DIV=2 # # CONFIG_ARN5307 is not set CONFIG_M5307C3=y -# CONFIG_eLIA is not set # CONFIG_SECUREEDGEMP3 is not set # CONFIG_CLEOPATRA is not set # CONFIG_NETtel is not set CONFIG_FREESCALE=y -# CONFIG_4KSTACKS is not set +CONFIG_4KSTACKS=y CONFIG_HZ=100 # @@ -153,45 +157,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -232,6 +227,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -241,7 +237,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -252,14 +250,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,7 +266,79 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -286,6 +350,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -299,7 +364,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -309,10 +374,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -322,8 +392,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -381,7 +453,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -394,13 +466,12 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_GEN_RTC is not set @@ -413,19 +484,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -436,6 +511,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -454,10 +530,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -466,7 +538,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -474,12 +549,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -487,6 +564,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -509,10 +591,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -520,14 +599,22 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -551,10 +638,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -563,18 +654,22 @@ CONFIG_FULLDEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68knommu/configs/m5407c3_defconfig b/trunk/arch/m68knommu/configs/m5407c3_defconfig index 1118936d20e3..97b6cde2fc19 100644 --- a/trunk/arch/m68knommu/configs/m5407c3_defconfig +++ b/trunk/arch/m68knommu/configs/m5407c3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Wed May 7 10:25:16 2008 +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 09:21:40 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -16,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -45,44 +55,43 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,7 +105,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -149,45 +158,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -228,6 +228,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -237,7 +238,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -248,14 +251,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,6 +271,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -334,6 +332,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -349,6 +352,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -362,7 +366,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -372,10 +376,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -385,8 +394,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -409,39 +420,22 @@ CONFIG_SLHC=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -454,7 +448,6 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -473,19 +466,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -496,6 +493,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -514,19 +512,17 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -534,12 +530,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -547,6 +545,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -569,10 +572,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -582,13 +582,20 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -611,11 +618,17 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -624,18 +637,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/m68knommu/kernel/asm-offsets.c b/trunk/arch/m68knommu/kernel/asm-offsets.c index c785d07c02cc..f500dd6935d6 100644 --- a/trunk/arch/m68knommu/kernel/asm-offsets.c +++ b/trunk/arch/m68knommu/kernel/asm-offsets.c @@ -30,9 +30,6 @@ int main(void) DEFINE(TASK_MM, offsetof(struct task_struct, mm)); DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* offsets into the irq_cpustat_t struct */ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); @@ -69,9 +66,6 @@ int main(void) DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4); #endif - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* signal defines */ DEFINE(SIGSEGV, SIGSEGV); DEFINE(SEGV_MAPERR, SEGV_MAPERR); diff --git a/trunk/arch/m68knommu/kernel/dma.c b/trunk/arch/m68knommu/kernel/dma.c index 936125806638..aaf38bbbb6cd 100644 --- a/trunk/arch/m68knommu/kernel/dma.c +++ b/trunk/arch/m68knommu/kernel/dma.c @@ -7,10 +7,9 @@ #include #include -#include #include #include -#include +#include void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -36,7 +35,39 @@ void dma_free_coherent(struct device *dev, size_t size, free_pages((unsigned long)vaddr, get_order(size)); } -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) +void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) { + switch (dir) { + case DMA_TO_DEVICE: + flush_dcache_range(handle, size); + break; + case DMA_FROM_DEVICE: + /* Should be clear already */ + break; + default: + if (printk_ratelimit()) + printk("dma_sync_single_for_device: unsupported dir %u\n", dir); + break; + } +} + +EXPORT_SYMBOL(dma_sync_single_for_device); +dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = virt_to_phys(addr); + flush_dcache_range(handle, size); + return handle; } +EXPORT_SYMBOL(dma_map_single); +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = page_to_phys(page) + offset; + dma_sync_single_for_device(dev, handle, size, dir); + return handle; +} +EXPORT_SYMBOL(dma_map_page); diff --git a/trunk/arch/m68knommu/kernel/entry.S b/trunk/arch/m68knommu/kernel/entry.S index f4782d2dce8f..f56faa5c9cd9 100644 --- a/trunk/arch/m68knommu/kernel/entry.S +++ b/trunk/arch/m68knommu/kernel/entry.S @@ -26,7 +26,6 @@ #include #include -#include #include #include #include diff --git a/trunk/arch/m68knommu/kernel/module.c b/trunk/arch/m68knommu/kernel/module.c index 3b1a2ff61ddc..d11ffae7956a 100644 --- a/trunk/arch/m68knommu/kernel/module.c +++ b/trunk/arch/m68knommu/kernel/module.c @@ -23,8 +23,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } /* We don't need anything special. */ diff --git a/trunk/arch/m68knommu/kernel/setup.c b/trunk/arch/m68knommu/kernel/setup.c index 5985f1989021..5c2bb3eeaaa2 100644 --- a/trunk/arch/m68knommu/kernel/setup.c +++ b/trunk/arch/m68knommu/kernel/setup.c @@ -166,15 +166,13 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n"); #endif -#ifdef DEBUG - printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end); -#endif + pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " + "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, + (int) &_sdata, (int) &_edata, + (int) &_sbss, (int) &_ebss); + pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", + (int) &_ebss, (int) memory_start, + (int) memory_start, (int) memory_end); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; diff --git a/trunk/arch/m68knommu/kernel/syscalltable.S b/trunk/arch/m68knommu/kernel/syscalltable.S index 1017e76f3711..c0b8782832fd 100644 --- a/trunk/arch/m68knommu/kernel/syscalltable.S +++ b/trunk/arch/m68knommu/kernel/syscalltable.S @@ -347,6 +347,8 @@ ENTRY(sys_call_table) .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall diff --git a/trunk/arch/m68knommu/kernel/vmlinux.lds.S b/trunk/arch/m68knommu/kernel/vmlinux.lds.S index 69ba9b10767a..b7fe505e358d 100644 --- a/trunk/arch/m68knommu/kernel/vmlinux.lds.S +++ b/trunk/arch/m68knommu/kernel/vmlinux.lds.S @@ -147,6 +147,8 @@ SECTIONS { . = ALIGN(4); _sdata = . ; DATA_DATA + . = ALIGN(32); + *(.data.cacheline_aligned) . = ALIGN(8192) ; *(.data.init_task) _edata = . ; diff --git a/trunk/arch/m68knommu/mm/init.c b/trunk/arch/m68knommu/mm/init.c index 7befc0c357e0..b1703c67a4f1 100644 --- a/trunk/arch/m68knommu/mm/init.c +++ b/trunk/arch/m68knommu/mm/init.c @@ -126,9 +126,7 @@ void __init mem_init(void) unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */ -#ifdef DEBUG - printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem); -#endif + pr_debug("Mem_init: start=%lx, end=%lx\n", start_mem, end_mem); end_mem &= PAGE_MASK; high_memory = (void *) end_mem; diff --git a/trunk/arch/m68knommu/platform/5206/config.c b/trunk/arch/m68knommu/platform/5206/config.c index 53a5920c2b71..f6f79874e9af 100644 --- a/trunk/arch/m68knommu/platform/5206/config.c +++ b/trunk/arch/m68knommu/platform/5206/config.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -21,10 +20,6 @@ /***************************************************************************/ -void coldfire_reset(void); - -/***************************************************************************/ - static struct mcf_platform_uart m5206_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -109,10 +104,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level) /***************************************************************************/ +void m5206_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to soft reset, and enabled */ + __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); - mach_reset = coldfire_reset; + mach_reset = m5206_cpu_reset; } /***************************************************************************/ diff --git a/trunk/arch/m68knommu/platform/5206e/config.c b/trunk/arch/m68knommu/platform/5206e/config.c index db902540bf2c..65887799db81 100644 --- a/trunk/arch/m68knommu/platform/5206e/config.c +++ b/trunk/arch/m68knommu/platform/5206e/config.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -21,10 +20,6 @@ /***************************************************************************/ -void coldfire_reset(void); - -/***************************************************************************/ - static struct mcf_platform_uart m5206e_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -109,6 +104,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level) /***************************************************************************/ +void m5206e_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to soft reset, and enabled */ + __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); @@ -119,7 +125,7 @@ void __init config_BSP(char *commandp, int size) commandp[size-1] = 0; #endif /* CONFIG_NETtel */ - mach_reset = coldfire_reset; + mach_reset = m5206e_cpu_reset; } /***************************************************************************/ diff --git a/trunk/arch/m68knommu/platform/520x/config.c b/trunk/arch/m68knommu/platform/520x/config.c index 855fc6a79d72..1c43a8aec69b 100644 --- a/trunk/arch/m68knommu/platform/520x/config.c +++ b/trunk/arch/m68knommu/platform/520x/config.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -23,10 +22,6 @@ /***************************************************************************/ -void coldfire_reset(void); - -/***************************************************************************/ - static struct mcf_platform_uart m520x_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -169,9 +164,17 @@ void mcf_autovector(unsigned int vec) /***************************************************************************/ +static void m520x_cpu_reset(void) +{ + local_irq_disable(); + __raw_writeb(MCF_RCR_SWRESET, MCF_RCR); +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { - mach_reset = coldfire_reset; + mach_reset = m520x_cpu_reset; m520x_uarts_init(); m520x_fec_init(); } diff --git a/trunk/arch/m68knommu/platform/523x/config.c b/trunk/arch/m68knommu/platform/523x/config.c index 74133f27b30c..961fefebca14 100644 --- a/trunk/arch/m68knommu/platform/523x/config.c +++ b/trunk/arch/m68knommu/platform/523x/config.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -24,10 +23,6 @@ /***************************************************************************/ -void coldfire_reset(void); - -/***************************************************************************/ - static struct mcf_platform_uart m523x_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -145,13 +140,20 @@ void mcf_autovector(unsigned int vec) { /* Everything is auto-vectored on the 523x */ } +/***************************************************************************/ + +static void m523x_cpu_reset(void) +{ + local_irq_disable(); + __raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR); +} /***************************************************************************/ void __init config_BSP(char *commandp, int size) { mcf_disableall(); - mach_reset = coldfire_reset; + mach_reset = m523x_cpu_reset; m523x_uarts_init(); m523x_fec_init(); } diff --git a/trunk/arch/m68knommu/platform/5249/config.c b/trunk/arch/m68knommu/platform/5249/config.c index 9eab19d01eb1..93d998825925 100644 --- a/trunk/arch/m68knommu/platform/5249/config.c +++ b/trunk/arch/m68knommu/platform/5249/config.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -20,10 +19,6 @@ /***************************************************************************/ -void coldfire_reset(void); - -/***************************************************************************/ - static struct mcf_platform_uart m5249_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -106,10 +101,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level) /***************************************************************************/ +void m5249_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to soft reset, and enabled */ + __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); - mach_reset = coldfire_reset; + mach_reset = m5249_cpu_reset; } /***************************************************************************/ diff --git a/trunk/arch/m68knommu/platform/5272/config.c b/trunk/arch/m68knommu/platform/5272/config.c index e049245f4092..5f95fcde05fd 100644 --- a/trunk/arch/m68knommu/platform/5272/config.c +++ b/trunk/arch/m68knommu/platform/5272/config.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -21,8 +20,6 @@ /***************************************************************************/ -void coldfire_reset(void); - extern unsigned int mcf_timervector; extern unsigned int mcf_profilevector; extern unsigned int mcf_timerlevel; @@ -170,6 +167,19 @@ void mcf_settimericr(int timer, int level) /***************************************************************************/ +static void m5272_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to reset, and enabled */ + __raw_writew(0, MCF_MBAR + MCFSIM_WIRR); + __raw_writew(1, MCF_MBAR + MCFSIM_WRRR); + __raw_writew(0, MCF_MBAR + MCFSIM_WCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { #if defined (CONFIG_MOD5272) @@ -194,7 +204,7 @@ void __init config_BSP(char *commandp, int size) mcf_timervector = 69; mcf_profilevector = 70; - mach_reset = coldfire_reset; + mach_reset = m5272_cpu_reset; } /***************************************************************************/ diff --git a/trunk/arch/m68knommu/platform/527x/config.c b/trunk/arch/m68knommu/platform/527x/config.c index 49343fb157b0..f746439cfd3e 100644 --- a/trunk/arch/m68knommu/platform/527x/config.c +++ b/trunk/arch/m68knommu/platform/527x/config.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -24,10 +23,6 @@ /***************************************************************************/ -void coldfire_reset(void); - -/***************************************************************************/ - static struct mcf_platform_uart m527x_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -189,10 +184,15 @@ static void __init m527x_fec_init(void) m527x_fec_irq_init(0); /* Set multi-function pins to ethernet mode for fec0 */ +#if defined(CONFIG_M5271) + v = readb(MCF_IPSBAR + 0x100047); + writeb(v | 0xf0, MCF_IPSBAR + 0x100047); +#else par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xf00, MCF_IPSBAR + 0x100082); v = readb(MCF_IPSBAR + 0x100078); writeb(v | 0xc0, MCF_IPSBAR + 0x100078); +#endif #ifdef CONFIG_FEC2 m527x_fec_irq_init(1); @@ -222,10 +222,18 @@ void mcf_autovector(unsigned int vec) /***************************************************************************/ +static void m527x_cpu_reset(void) +{ + local_irq_disable(); + __raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR); +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { mcf_disableall(); - mach_reset = coldfire_reset; + mach_reset = m527x_cpu_reset; m527x_uarts_init(); m527x_fec_init(); } diff --git a/trunk/arch/m68knommu/platform/528x/config.c b/trunk/arch/m68knommu/platform/528x/config.c index bee526f4d1af..a1d1a61c4fe6 100644 --- a/trunk/arch/m68knommu/platform/528x/config.c +++ b/trunk/arch/m68knommu/platform/528x/config.c @@ -31,10 +31,6 @@ /***************************************************************************/ -void coldfire_reset(void); - -/***************************************************************************/ - static struct mcf_platform_uart m528x_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -171,6 +167,14 @@ void mcf_autovector(unsigned int vec) /***************************************************************************/ +static void m528x_cpu_reset(void) +{ + local_irq_disable(); + __raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR); +} + +/***************************************************************************/ + #ifdef CONFIG_WILDFIRE void wildfire_halt(void) { @@ -214,6 +218,7 @@ void __init config_BSP(char *commandp, int size) static int __init init_BSP(void) { + mach_reset = m528x_cpu_reset; m528x_uarts_init(); m528x_fec_init(); platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices)); diff --git a/trunk/arch/m68knommu/platform/5307/config.c b/trunk/arch/m68knommu/platform/5307/config.c index 44803bf70a6e..39da9e9ff674 100644 --- a/trunk/arch/m68knommu/platform/5307/config.c +++ b/trunk/arch/m68knommu/platform/5307/config.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -22,8 +21,6 @@ /***************************************************************************/ -void coldfire_reset(void); - extern unsigned int mcf_timervector; extern unsigned int mcf_profilevector; extern unsigned int mcf_timerlevel; @@ -119,6 +116,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level) /***************************************************************************/ +void m5307_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to soft reset, and enabled */ + __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); @@ -134,7 +142,7 @@ void __init config_BSP(char *commandp, int size) mcf_timerlevel = 6; #endif - mach_reset = coldfire_reset; + mach_reset = m5307_cpu_reset; #ifdef CONFIG_BDM_DISABLE /* diff --git a/trunk/arch/m68knommu/platform/532x/config.c b/trunk/arch/m68knommu/platform/532x/config.c index 591f2f801134..cdb761971f7a 100644 --- a/trunk/arch/m68knommu/platform/532x/config.c +++ b/trunk/arch/m68knommu/platform/532x/config.c @@ -31,8 +31,6 @@ /***************************************************************************/ -void coldfire_reset(void); - extern unsigned int mcf_timervector; extern unsigned int mcf_profilevector; extern unsigned int mcf_timerlevel; @@ -164,6 +162,14 @@ void mcf_settimericr(unsigned int timer, unsigned int level) /***************************************************************************/ +static void m532x_cpu_reset(void) +{ + local_irq_disable(); + __raw_writeb(MCF_RCR_SWRESET, MCF_RCR); +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); @@ -181,7 +187,7 @@ void __init config_BSP(char *commandp, int size) mcf_timervector = 64+32; mcf_profilevector = 64+33; - mach_reset = coldfire_reset; + mach_reset = m532x_cpu_reset; #ifdef CONFIG_BDM_DISABLE /* diff --git a/trunk/arch/m68knommu/platform/5407/config.c b/trunk/arch/m68knommu/platform/5407/config.c index 0ee8c1a200c8..b41d942bf8d0 100644 --- a/trunk/arch/m68knommu/platform/5407/config.c +++ b/trunk/arch/m68knommu/platform/5407/config.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -21,8 +20,6 @@ /***************************************************************************/ -void coldfire_reset(void); - extern unsigned int mcf_timervector; extern unsigned int mcf_profilevector; extern unsigned int mcf_timerlevel; @@ -110,6 +107,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level) /***************************************************************************/ +void m5407_cpu_reset(void) +{ + local_irq_disable(); + /* set watchdog to soft reset, and enabled */ + __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); @@ -121,7 +129,7 @@ void __init config_BSP(char *commandp, int size) mcf_timerlevel = 6; #endif - mach_reset = coldfire_reset; + mach_reset = m5407_cpu_reset; } /***************************************************************************/ diff --git a/trunk/arch/m68knommu/platform/coldfire/vectors.c b/trunk/arch/m68knommu/platform/coldfire/vectors.c index 6cf894620234..bdca0297fa9a 100644 --- a/trunk/arch/m68knommu/platform/coldfire/vectors.c +++ b/trunk/arch/m68knommu/platform/coldfire/vectors.c @@ -96,10 +96,3 @@ void ack_vector(unsigned int irq) } /***************************************************************************/ - -void coldfire_reset(void) -{ - HARD_RESET_NOW(); -} - -/***************************************************************************/ diff --git a/trunk/arch/microblaze/Makefile b/trunk/arch/microblaze/Makefile index 0dcbb9832974..aaadfa701da3 100644 --- a/trunk/arch/microblaze/Makefile +++ b/trunk/arch/microblaze/Makefile @@ -26,21 +26,19 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) endif CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift -CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare +CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) # The various CONFIG_XILINX cpu features options are integers 0/1/2... # rather than bools y/n -CFLAGS += $(CPUFLAGS-1) -CFLAGS += $(CPUFLAGS-2) # r31 holds current when in kernel mode -CFLAGS += -ffixed-r31 +CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS_BLOB := --format binary --oformat elf32-microblaze -LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name) head-y := arch/microblaze/kernel/head.o libs-y += arch/microblaze/lib/ $(LIBGCC) diff --git a/trunk/arch/microblaze/configs/nommu_defconfig b/trunk/arch/microblaze/configs/nommu_defconfig index beb7ecd72793..4ef6af0a8f31 100644 --- a/trunk/arch/microblaze/configs/nommu_defconfig +++ b/trunk/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Tue Mar 24 10:23:20 2009 +# Linux kernel version: 2.6.30-rc5 +# Mon May 11 09:01:02 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -80,6 +82,8 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Exectuable file formats @@ -180,7 +185,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -562,6 +569,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -601,8 +613,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_HEART_BEAT=y @@ -777,6 +789,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -784,6 +797,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y diff --git a/trunk/arch/microblaze/include/asm/cache.h b/trunk/arch/microblaze/include/asm/cache.h index c4c64b43c074..c209c47509d5 100644 --- a/trunk/arch/microblaze/include/asm/cache.h +++ b/trunk/arch/microblaze/include/asm/cache.h @@ -37,9 +37,4 @@ void _invalidate_dcache(unsigned int addr); #define __disable_dcache() _disable_dcache() #define __invalidate_dcache(addr) _invalidate_dcache(addr) -/* FIXME - I don't think this is right */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW -#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE) -#endif - #endif /* _ASM_MICROBLAZE_CACHE_H */ diff --git a/trunk/arch/microblaze/include/asm/entry.h b/trunk/arch/microblaze/include/asm/entry.h index 7f57e42ee467..e4c3aef884df 100644 --- a/trunk/arch/microblaze/include/asm/entry.h +++ b/trunk/arch/microblaze/include/asm/entry.h @@ -29,7 +29,9 @@ DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */ DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ -DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */ # endif /* __ASSEMBLY__ */ +/* noMMU hasn't any space for args */ +# define STATE_SAVE_ARG_SPACE (0) + #endif /* _ASM_MICROBLAZE_ENTRY_H */ diff --git a/trunk/arch/microblaze/include/asm/exceptions.h b/trunk/arch/microblaze/include/asm/exceptions.h index 4cdd2159f470..24ca540e77c0 100644 --- a/trunk/arch/microblaze/include/asm/exceptions.h +++ b/trunk/arch/microblaze/include/asm/exceptions.h @@ -61,6 +61,9 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, int fsr, int addr); +void die(const char *str, struct pt_regs *fp, long err); +void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); + #if defined(CONFIG_XMON) extern void xmon(struct pt_regs *regs); extern int xmon_bpt(struct pt_regs *regs); diff --git a/trunk/arch/microblaze/include/asm/of_platform.h b/trunk/arch/microblaze/include/asm/of_platform.h index 187c0eedaece..37491276c6ca 100644 --- a/trunk/arch/microblaze/include/asm/of_platform.h +++ b/trunk/arch/microblaze/include/asm/of_platform.h @@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = { {}, }; -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/trunk/arch/microblaze/include/asm/processor.h b/trunk/arch/microblaze/include/asm/processor.h index d8e15434ba21..9329029d2614 100644 --- a/trunk/arch/microblaze/include/asm/processor.h +++ b/trunk/arch/microblaze/include/asm/processor.h @@ -15,6 +15,8 @@ #include #include #include +#include +#include # ifndef __ASSEMBLY__ /* from kernel/cpu/mb.c */ @@ -26,6 +28,12 @@ extern const struct seq_operations cpuinfo_op; # endif /* __ASSEMBLY__ */ +#define task_pt_regs(tsk) \ + (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) + +/* Do necessary setup to start up a newly executed thread. */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp); + /* * User space process size: memory size * @@ -55,16 +63,6 @@ struct task_struct; struct thread_struct { }; # define INIT_THREAD { } -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread(struct pt_regs *regs, - unsigned long pc, - unsigned long usp) -{ - regs->pc = pc; - regs->r1 = usp; - regs->kernel_mode = 0; -} - /* Free all resources held by a thread. */ static inline void release_thread(struct task_struct *dead_task) { @@ -84,9 +82,6 @@ extern unsigned long get_wchan(struct task_struct *p); */ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); -# define task_pt_regs(tsk) \ - (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) - # define KSTK_EIP(tsk) (0) # define KSTK_ESP(tsk) (0) diff --git a/trunk/arch/microblaze/include/asm/ptrace.h b/trunk/arch/microblaze/include/asm/ptrace.h index f1f03486428a..55015bce5e47 100644 --- a/trunk/arch/microblaze/include/asm/ptrace.h +++ b/trunk/arch/microblaze/include/asm/ptrace.h @@ -52,10 +52,10 @@ struct pt_regs { microblaze_reg_t ear; microblaze_reg_t esr; microblaze_reg_t fsr; - int kernel_mode; + int pt_mode; }; -#define kernel_mode(regs) ((regs)->kernel_mode) +#define kernel_mode(regs) ((regs)->pt_mode) #define user_mode(regs) (!kernel_mode(regs)) #define instruction_pointer(regs) ((regs)->pc) diff --git a/trunk/arch/microblaze/include/asm/unistd.h b/trunk/arch/microblaze/include/asm/unistd.h index d9d3903fde3f..b5e2f5fa5c53 100644 --- a/trunk/arch/microblaze/include/asm/unistd.h +++ b/trunk/arch/microblaze/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_sendmsg 360 /* new */ #define __NR_recvmsg 361 /* new */ #define __NR_accept04 362 /* new */ +#define __NR_preadv 363 /* new */ +#define __NR_pwritev 364 /* new */ -#define __NR_syscalls 363 +#define __NR_syscalls 365 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/trunk/arch/microblaze/kernel/asm-offsets.c b/trunk/arch/microblaze/kernel/asm-offsets.c index 38e1a2e8ad0c..aabd9e9423a6 100644 --- a/trunk/arch/microblaze/kernel/asm-offsets.c +++ b/trunk/arch/microblaze/kernel/asm-offsets.c @@ -57,7 +57,7 @@ int main(int argc, char *argv[]) DEFINE(PT_R29, offsetof(struct pt_regs, r29)); DEFINE(PT_R30, offsetof(struct pt_regs, r30)); DEFINE(PT_R31, offsetof(struct pt_regs, r31)); - DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode)); + DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode)); BLANK(); /* Magic offsets for PTRACE PEEK/POKE etc */ diff --git a/trunk/arch/microblaze/kernel/cpu/cache.c b/trunk/arch/microblaze/kernel/cpu/cache.c index be9fecca4f91..af866a450125 100644 --- a/trunk/arch/microblaze/kernel/cpu/cache.c +++ b/trunk/arch/microblaze/kernel/cpu/cache.c @@ -100,7 +100,6 @@ void _enable_dcache(void) void _disable_dcache(void) { - if (cpuinfo.use_dcache) { #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR __asm__ __volatile__ (" \ msrclr r0, %0; \ @@ -119,12 +118,10 @@ void _disable_dcache(void) : "i" (MSR_DCE) \ : "memory", "r12"); #endif - } } void _invalidate_dcache(unsigned int addr) { - if (cpuinfo.use_dcache) __asm__ __volatile__ (" \ wdc %0, r0" \ : \ diff --git a/trunk/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/trunk/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index cf7424a6bb87..153f57c57b6d 100644 --- a/trunk/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/trunk/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -30,6 +30,13 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) int temp; /* for saving temp value */ get_pvr(&pvr); + CI(ver_code, VERSION); + if (!ci->ver_code) { + printk(KERN_ERR "ERROR: MB has broken PVR regs " + "-> use DTS setting\n"); + return; + } + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); if (ci->use_instr != temp) @@ -60,8 +67,6 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(mmu, USE_MMU); - CI(ver_code, VERSION); - CI(use_icache, USE_ICACHE); CI(icache_tagbits, ICACHE_ADDR_TAG_BITS); CI(icache_write, ICACHE_ALLOW_WR); diff --git a/trunk/arch/microblaze/kernel/cpu/cpuinfo-static.c b/trunk/arch/microblaze/kernel/cpu/cpuinfo-static.c index cfe44effdb77..450ca6bb828d 100644 --- a/trunk/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/trunk/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -14,8 +14,8 @@ #include #include -const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; -const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; +static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; +static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; #define err_printk(x) \ early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n"); diff --git a/trunk/arch/microblaze/kernel/cpu/cpuinfo.c b/trunk/arch/microblaze/kernel/cpu/cpuinfo.c index 4a740dfcf6da..a10bea119b94 100644 --- a/trunk/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/trunk/arch/microblaze/kernel/cpu/cpuinfo.c @@ -71,7 +71,7 @@ void __init setup_cpuinfo(void) __func__); set_cpuinfo_static(&cpuinfo, cpu); break; -/* FIXME I found weird behavior with MB 7.00.a/b +/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a * please do not use FULL PVR with MMU */ case 1: printk(KERN_INFO "%s: Using full CPU PVR support\n", diff --git a/trunk/arch/microblaze/kernel/cpu/mb.c b/trunk/arch/microblaze/kernel/cpu/mb.c index 3b6212bdc8dc..4dcfccdbc364 100644 --- a/trunk/arch/microblaze/kernel/cpu/mb.c +++ b/trunk/arch/microblaze/kernel/cpu/mb.c @@ -115,8 +115,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpuinfo.hw_debug ? "yes" : "no"); count += seq_printf(m, - "PVR-USR1:\t%x\n" - "PVR-USR2:\t%x\n", + "PVR-USR1:\t%02x\n" + "PVR-USR2:\t%08x\n", cpuinfo.pvr_user1, cpuinfo.pvr_user2); diff --git a/trunk/arch/microblaze/kernel/early_printk.c b/trunk/arch/microblaze/kernel/early_printk.c index 62cc78993f44..4b0f0fdb9ca0 100644 --- a/trunk/arch/microblaze/kernel/early_printk.c +++ b/trunk/arch/microblaze/kernel/early_printk.c @@ -36,7 +36,7 @@ static void early_printk_putc(char c) unsigned retries = 10000; /* read status bit - 0x8 offset */ - while (retries-- && (in_be32(base_addr + 8) & (1 << 3))) + while (--retries && (in_be32(base_addr + 8) & (1 << 3))) ; /* Only attempt the iowrite if we didn't timeout */ diff --git a/trunk/arch/microblaze/kernel/intc.c b/trunk/arch/microblaze/kernel/intc.c index a69d3e3c2fd4..b15605299a57 100644 --- a/trunk/arch/microblaze/kernel/intc.c +++ b/trunk/arch/microblaze/kernel/intc.c @@ -137,8 +137,8 @@ void __init init_IRQ(void) intr_type = *(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL); - if (intr_type >= (1 << nr_irq)) - printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n"); + if (intr_type >= (1 << (nr_irq + 1))) + printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n"); #ifdef CONFIG_SELFMOD_INTC selfmod_function((int *) arr_func, intc_baseaddr); diff --git a/trunk/arch/microblaze/kernel/process.c b/trunk/arch/microblaze/kernel/process.c index 436f26ccbfa9..07d4fa339eda 100644 --- a/trunk/arch/microblaze/kernel/process.c +++ b/trunk/arch/microblaze/kernel/process.c @@ -18,7 +18,7 @@ void show_regs(struct pt_regs *regs) { - printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode); + printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode); printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", regs->r1, regs->r2, regs->r3, regs->r4); printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", @@ -37,8 +37,6 @@ void show_regs(struct pt_regs *regs) regs->r29, regs->r30, regs->r31, regs->pc); printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", regs->msr, regs->ear, regs->esr, regs->fsr); - while (1) - ; } void (*pm_idle)(void); @@ -163,7 +161,6 @@ static void kernel_thread_helper(int (*fn)(void *), void *arg) int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) { struct pt_regs regs; - int ret; memset(®s, 0, sizeof(regs)); /* store them in non-volatile registers */ @@ -171,12 +168,10 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.r6 = (unsigned long)arg; local_save_flags(regs.msr); regs.pc = (unsigned long)kernel_thread_helper; - regs.kernel_mode = 1; + regs.pt_mode = 1; - ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); - - return ret; } unsigned long get_wchan(struct task_struct *p) @@ -184,3 +179,12 @@ unsigned long get_wchan(struct task_struct *p) /* TBD (used by procfs) */ return 0; } + +/* Set up a thread for executing a new program */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) +{ + set_fs(USER_DS); + regs->pc = pc; + regs->r1 = usp; + regs->pt_mode = 0; +} diff --git a/trunk/arch/microblaze/kernel/signal.c b/trunk/arch/microblaze/kernel/signal.c index 3889cf45fa71..40d36931e363 100644 --- a/trunk/arch/microblaze/kernel/signal.c +++ b/trunk/arch/microblaze/kernel/signal.c @@ -178,7 +178,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p) asmlinkage int sys_sigreturn(struct pt_regs *regs) { - struct sigframe *frame = (struct sigframe *)regs->r1; + struct sigframe *frame = + (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; int rval; @@ -209,7 +211,9 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs) asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) { - struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1; + struct rt_sigframe *frame = + (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; stack_t st; int rval; @@ -336,7 +340,8 @@ static void setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* Arg 0: signum */ regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */ @@ -414,7 +419,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* arg 0: signum */ regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */ diff --git a/trunk/arch/microblaze/kernel/sys_microblaze.c b/trunk/arch/microblaze/kernel/sys_microblaze.c index ba0568c2cc1c..31905ff590b7 100644 --- a/trunk/arch/microblaze/kernel/sys_microblaze.c +++ b/trunk/arch/microblaze/kernel/sys_microblaze.c @@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) ret = sys_shmctl(first, second, (struct shmid_ds *) ptr); break; } - return -EINVAL; + return ret; } asmlinkage int sys_vfork(struct pt_regs *regs) diff --git a/trunk/arch/microblaze/kernel/syscall_table.S b/trunk/arch/microblaze/kernel/syscall_table.S index 529b0dbf4fe9..3bb42ec924c2 100644 --- a/trunk/arch/microblaze/kernel/syscall_table.S +++ b/trunk/arch/microblaze/kernel/syscall_table.S @@ -363,3 +363,5 @@ ENTRY(sys_call_table) .long sys_sendmsg /* 360 */ .long sys_recvmsg .long sys_ni_syscall + .long sys_ni_syscall + .long sys_ni_syscall diff --git a/trunk/arch/microblaze/kernel/timer.c b/trunk/arch/microblaze/kernel/timer.c index 05a497eefd78..bdfa2f9f0c81 100644 --- a/trunk/arch/microblaze/kernel/timer.c +++ b/trunk/arch/microblaze/kernel/timer.c @@ -176,7 +176,7 @@ static __init void microblaze_clockevent_init(void) clockevents_register_device(&clockevent_microblaze_timer); } -static cycle_t microblaze_read(void) +static cycle_t microblaze_read(struct clocksource *cs) { /* reading actual value of timer 1 */ return (cycle_t) (in_be32(TIMER_BASE + TCR1)); diff --git a/trunk/arch/microblaze/kernel/traps.c b/trunk/arch/microblaze/kernel/traps.c index fbdc533c61e3..293ef486013a 100644 --- a/trunk/arch/microblaze/kernel/traps.c +++ b/trunk/arch/microblaze/kernel/traps.c @@ -34,7 +34,7 @@ static int kstack_depth_to_print = 24; static int __init kstack_setup(char *s) { - kstack_depth_to_print = strict_strtoul(s, 0, 0); + kstack_depth_to_print = strict_strtoul(s, 0, NULL); return 1; } diff --git a/trunk/arch/mips/Kconfig b/trunk/arch/mips/Kconfig index 998e5db8cc0f..25f3b0a11ca8 100644 --- a/trunk/arch/mips/Kconfig +++ b/trunk/arch/mips/Kconfig @@ -72,6 +72,7 @@ config MIPS_COBALT select IRQ_CPU select IRQ_GT641XX select PCI_GT64XXX_PCI0 + select PCI select SYS_HAS_CPU_NEVADA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL @@ -593,7 +594,7 @@ config WR_PPMC board, which is based on GT64120 bridge chip. config CAVIUM_OCTEON_SIMULATOR - bool "Support for the Cavium Networks Octeon Simulator" + bool "Cavium Networks Octeon Simulator" select CEVT_R4K select 64BIT_PHYS_ADDR select DMA_COHERENT @@ -607,7 +608,7 @@ config CAVIUM_OCTEON_SIMULATOR hardware. config CAVIUM_OCTEON_REFERENCE_BOARD - bool "Support for the Cavium Networks Octeon reference board" + bool "Cavium Networks Octeon reference board" select CEVT_R4K select 64BIT_PHYS_ADDR select DMA_COHERENT @@ -1411,13 +1412,12 @@ config PAGE_SIZE_4KB config PAGE_SIZE_8KB bool "8kB" - depends on EXPERIMENTAL && CPU_R8000 + depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON help Using 8kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available - only on the R8000 processor. Not that at the time of this writing - this option is still high experimental; there are also issues with - compatibility of user applications. + only on R8000 and cnMIPS processors. Note that you will need a + suitable Linux distribution to support this. config PAGE_SIZE_16KB bool "16kB" @@ -1428,6 +1428,15 @@ config PAGE_SIZE_16KB all non-R3000 family processors. Note that you will need a suitable Linux distribution to support this. +config PAGE_SIZE_32KB + bool "32kB" + depends on CPU_CAVIUM_OCTEON + help + Using 32kB page size will result in higher performance kernel at + the price of higher memory consumption. This option is available + only on cnMIPS cores. Note that you will need a suitable Linux + distribution to support this. + config PAGE_SIZE_64KB bool "64kB" depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX @@ -1958,10 +1967,6 @@ config SECCOMP endmenu -config RWSEM_GENERIC_SPINLOCK - bool - default y - config LOCKDEP_SUPPORT bool default y diff --git a/trunk/arch/mips/Makefile b/trunk/arch/mips/Makefile index 8d544c7c9fe9..c4cae9e6b802 100644 --- a/trunk/arch/mips/Makefile +++ b/trunk/arch/mips/Makefile @@ -14,8 +14,6 @@ KBUILD_DEFCONFIG := ip22_defconfig -cflags-y := -ffunction-sections - # # Select the object file format to substitute into the linker script. # @@ -50,6 +48,9 @@ ifneq ($(SUBARCH),$(ARCH)) endif endif +cflags-y := -ffunction-sections +cflags-y += $(call cc-option, -mno-check-zero-division) + ifdef CONFIG_32BIT ld-emul = $(32bit-emul) vmlinux-32 = vmlinux @@ -472,12 +473,12 @@ endif # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys # ifdef CONFIG_SGI_IP28 - ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n) - $(error gcc doesn't support needed option -mr10k-cache-barrier=1) + ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n) + $(error gcc doesn't support needed option -mr10k-cache-barrier=store) endif endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28 +cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # diff --git a/trunk/arch/mips/alchemy/common/time.c b/trunk/arch/mips/alchemy/common/time.c index f58d4ffb8945..33fbae79af5e 100644 --- a/trunk/arch/mips/alchemy/common/time.c +++ b/trunk/arch/mips/alchemy/common/time.c @@ -44,7 +44,7 @@ extern int allow_au1k_wait; /* default off for CP0 Counter */ -static cycle_t au1x_counter1_read(void) +static cycle_t au1x_counter1_read(struct clocksource *cs) { return au_readl(SYS_RTCREAD); } diff --git a/trunk/arch/mips/cavium-octeon/csrc-octeon.c b/trunk/arch/mips/cavium-octeon/csrc-octeon.c index 70fd92c31657..96110f217dcd 100644 --- a/trunk/arch/mips/cavium-octeon/csrc-octeon.c +++ b/trunk/arch/mips/cavium-octeon/csrc-octeon.c @@ -38,7 +38,7 @@ void octeon_init_cvmcount(void) local_irq_restore(flags); } -static cycle_t octeon_cvmcount_read(void) +static cycle_t octeon_cvmcount_read(struct clocksource *cs) { return read_c0_cvmcount(); } diff --git a/trunk/arch/mips/cavium-octeon/octeon-irq.c b/trunk/arch/mips/cavium-octeon/octeon-irq.c index 1c19af8daa62..d3a0c8154bec 100644 --- a/trunk/arch/mips/cavium-octeon/octeon-irq.c +++ b/trunk/arch/mips/cavium-octeon/octeon-irq.c @@ -177,7 +177,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq) } #ifdef CONFIG_SMP -static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest) +static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ @@ -199,6 +199,8 @@ static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); write_unlock(&octeon_irq_ciu0_rwlock); + + return 0; } #endif @@ -292,7 +294,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq) } #ifdef CONFIG_SMP -static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) +static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ @@ -315,6 +317,8 @@ static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); write_unlock(&octeon_irq_ciu1_rwlock); + + return 0; } #endif diff --git a/trunk/arch/mips/include/asm/bitops.h b/trunk/arch/mips/include/asm/bitops.h index bac4a960b24c..b1e9e97a9c78 100644 --- a/trunk/arch/mips/include/asm/bitops.h +++ b/trunk/arch/mips/include/asm/bitops.h @@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word) int num; if (BITS_PER_LONG == 32 && - __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { + __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) { __asm__( " .set push \n" " .set mips32 \n" @@ -644,7 +644,7 @@ static inline int fls(int x) { int r; - if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { + if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) { __asm__("clz %0, %1" : "=r" (x) : "r" (x)); return 32 - x; diff --git a/trunk/arch/mips/include/asm/checksum.h b/trunk/arch/mips/include/asm/checksum.h index 290485ac5407..f2f7c6c264da 100644 --- a/trunk/arch/mips/include/asm/checksum.h +++ b/trunk/arch/mips/include/asm/checksum.h @@ -40,7 +40,7 @@ static inline __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr) { - might_sleep(); + might_fault(); return __csum_partial_copy_user((__force void *)src, dst, len, sum, err_ptr); } @@ -53,7 +53,7 @@ static inline __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, __wsum sum, int *err_ptr) { - might_sleep(); + might_fault(); if (access_ok(VERIFY_WRITE, dst, len)) return __csum_partial_copy_user(src, (__force void *)dst, len, sum, err_ptr); diff --git a/trunk/arch/mips/include/asm/compat.h b/trunk/arch/mips/include/asm/compat.h index 6c5b40905dd6..f58aed354bfd 100644 --- a/trunk/arch/mips/include/asm/compat.h +++ b/trunk/arch/mips/include/asm/compat.h @@ -3,7 +3,6 @@ /* * Architecture specific compatibility types */ -#include #include #include #include diff --git a/trunk/arch/mips/include/asm/cpu-features.h b/trunk/arch/mips/include/asm/cpu-features.h index a0d14f85b781..c0047f861337 100644 --- a/trunk/arch/mips/include/asm/cpu-features.h +++ b/trunk/arch/mips/include/asm/cpu-features.h @@ -147,6 +147,15 @@ #define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \ cpu_has_mips64r1 | cpu_has_mips64r2) +/* + * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other + * pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels + * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ. + */ +# ifndef cpu_has_clo_clz +# define cpu_has_clo_clz cpu_has_mips_r +# endif + #ifndef cpu_has_dsp #define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP) #endif diff --git a/trunk/arch/mips/include/asm/cpu-info.h b/trunk/arch/mips/include/asm/cpu-info.h index 744cd8fb107f..126044308dec 100644 --- a/trunk/arch/mips/include/asm/cpu-info.h +++ b/trunk/arch/mips/include/asm/cpu-info.h @@ -39,8 +39,8 @@ struct cache_desc { #define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ struct cpuinfo_mips { - unsigned long udelay_val; - unsigned long asid_cache; + unsigned int udelay_val; + unsigned int asid_cache; /* * Capability and feature descriptor structure for MIPS CPU diff --git a/trunk/arch/mips/include/asm/delay.h b/trunk/arch/mips/include/asm/delay.h index b0bccd2c4ed5..a07e51b2be13 100644 --- a/trunk/arch/mips/include/asm/delay.h +++ b/trunk/arch/mips/include/asm/delay.h @@ -11,94 +11,12 @@ #ifndef _ASM_DELAY_H #define _ASM_DELAY_H -#include -#include +extern void __delay(unsigned int loops); +extern void __ndelay(unsigned int ns); +extern void __udelay(unsigned int us); -#include -#include - -static inline void __delay(unsigned long loops) -{ - if (sizeof(long) == 4) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " subu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && !DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, %2 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops), "r" (1)); -} - - -/* - * Division by multiplication: you don't have to worry about - * loss of precision. - * - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ - -static inline void __udelay(unsigned long usecs, unsigned long lpj) -{ - unsigned long hi, lo; - - /* - * The rates of 128 is rounded wrongly by the catchall case - * for 64-bit. Excessive precission? Probably ... - */ -#if defined(CONFIG_64BIT) && (HZ == 128) - usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */ -#elif defined(CONFIG_64BIT) - usecs *= (0x8000000000000000UL / (500000 / HZ)); -#else /* 32-bit junk follows here */ - usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) + - 0x80000000ULL) >> 32); -#endif - - if (sizeof(long) == 4) - __asm__("multu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && !R4000_WAR) - __asm__("dmultu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && R4000_WAR) - __asm__("dmultu\t%3, %4\n\tmfhi\t%0" - : "=r" (usecs), "=h" (hi), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - - __delay(usecs); -} - -#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val - -#define udelay(usecs) __udelay((usecs), __udelay_val) +#define ndelay(ns) __udelay(ns) +#define udelay(us) __udelay(us) /* make sure "usecs *= ..." in udelay do not overflow. */ #if HZ >= 1000 diff --git a/trunk/arch/mips/include/asm/div64.h b/trunk/arch/mips/include/asm/div64.h index d1d699105c11..dc5ea5736440 100644 --- a/trunk/arch/mips/include/asm/div64.h +++ b/trunk/arch/mips/include/asm/div64.h @@ -6,105 +6,63 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#ifndef _ASM_DIV64_H -#define _ASM_DIV64_H +#ifndef __ASM_DIV64_H +#define __ASM_DIV64_H -#include +#include -#if (_MIPS_SZLONG == 32) +#if BITS_PER_LONG == 64 -#include +#include /* * No traps on overflows for any of these... */ -#define do_div64_32(res, high, low, base) ({ \ - unsigned long __quot32, __mod32; \ - unsigned long __cf, __tmp, __tmp2, __i; \ - \ - __asm__(".set push\n\t" \ - ".set noat\n\t" \ - ".set noreorder\n\t" \ - "move %2, $0\n\t" \ - "move %3, $0\n\t" \ - "b 1f\n\t" \ - " li %4, 0x21\n" \ - "0:\n\t" \ - "sll $1, %0, 0x1\n\t" \ - "srl %3, %0, 0x1f\n\t" \ - "or %0, $1, %5\n\t" \ - "sll %1, %1, 0x1\n\t" \ - "sll %2, %2, 0x1\n" \ - "1:\n\t" \ - "bnez %3, 2f\n\t" \ - " sltu %5, %0, %z6\n\t" \ - "bnez %5, 3f\n" \ - "2:\n\t" \ - " addiu %4, %4, -1\n\t" \ - "subu %0, %0, %z6\n\t" \ - "addiu %2, %2, 1\n" \ - "3:\n\t" \ - "bnez %4, 0b\n\t" \ - " srl %5, %1, 0x1f\n\t" \ - ".set pop" \ - : "=&r" (__mod32), "=&r" (__tmp), \ - "=&r" (__quot32), "=&r" (__cf), \ - "=&r" (__i), "=&r" (__tmp2) \ - : "Jr" (base), "0" (high), "1" (low)); \ - \ - (res) = __quot32; \ - __mod32; }) - -#define do_div(n, base) ({ \ - unsigned long long __quot; \ - unsigned long __mod; \ - unsigned long long __div; \ - unsigned long __upper, __low, __high, __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __high = __div >> 32; \ - __low = __div; \ - __upper = __high; \ - \ - if (__high) \ - __asm__("divu $0, %z2, %z3" \ - : "=h" (__upper), "=l" (__high) \ - : "Jr" (__high), "Jr" (__base) \ - : GCC_REG_ACCUM); \ - \ - __mod = do_div64_32(__low, __upper, __low, __base); \ - \ - __quot = __high; \ - __quot = __quot << 32 | __low; \ - (n) = __quot; \ - __mod; }) - -#endif /* (_MIPS_SZLONG == 32) */ - -#if (_MIPS_SZLONG == 64) - -/* - * Hey, we're already 64-bit, no - * need to play games.. - */ -#define do_div(n, base) ({ \ - unsigned long __quot; \ - unsigned int __mod; \ - unsigned long __div; \ - unsigned int __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __mod = __div % __base; \ - __quot = __div / __base; \ - \ - (n) = __quot; \ - __mod; }) +#define __div64_32(n, base) \ +({ \ + unsigned long __cf, __tmp, __tmp2, __i; \ + unsigned long __quot32, __mod32; \ + unsigned long __high, __low; \ + unsigned long long __n; \ + \ + __high = *__n >> 32; \ + __low = __n; \ + __asm__( \ + " .set push \n" \ + " .set noat \n" \ + " .set noreorder \n" \ + " move %2, $0 \n" \ + " move %3, $0 \n" \ + " b 1f \n" \ + " li %4, 0x21 \n" \ + "0: \n" \ + " sll $1, %0, 0x1 \n" \ + " srl %3, %0, 0x1f \n" \ + " or %0, $1, %5 \n" \ + " sll %1, %1, 0x1 \n" \ + " sll %2, %2, 0x1 \n" \ + "1: \n" \ + " bnez %3, 2f \n" \ + " sltu %5, %0, %z6 \n" \ + " bnez %5, 3f \n" \ + "2: \n" \ + " addiu %4, %4, -1 \n" \ + " subu %0, %0, %z6 \n" \ + " addiu %2, %2, 1 \n" \ + "3: \n" \ + " bnez %4, 0b\n\t" \ + " srl %5, %1, 0x1f\n\t" \ + " .set pop" \ + : "=&r" (__mod32), "=&r" (__tmp), \ + "=&r" (__quot32), "=&r" (__cf), \ + "=&r" (__i), "=&r" (__tmp2) \ + : "Jr" (base), "0" (__high), "1" (__low)); \ + \ + (__n) = __quot32; \ + __mod32; \ +}) -#endif /* (_MIPS_SZLONG == 64) */ +#endif /* BITS_PER_LONG == 64 */ -#endif /* _ASM_DIV64_H */ +#endif /* __ASM_DIV64_H */ diff --git a/trunk/arch/mips/include/asm/dma-mapping.h b/trunk/arch/mips/include/asm/dma-mapping.h index c64afb40cd06..d16afddb09a9 100644 --- a/trunk/arch/mips/include/asm/dma-mapping.h +++ b/trunk/arch/mips/include/asm/dma-mapping.h @@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction); extern dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction); + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction) +{ + dma_unmap_single(dev, dma_address, size, direction); +} + extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, enum dma_data_direction direction); extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, diff --git a/trunk/arch/mips/include/asm/fixmap.h b/trunk/arch/mips/include/asm/fixmap.h index 9cc8522a394f..0f5caa1307f1 100644 --- a/trunk/arch/mips/include/asm/fixmap.h +++ b/trunk/arch/mips/include/asm/fixmap.h @@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr) return __virt_to_fix(vaddr); } +#define kmap_get_fixmap_pte(vaddr) \ + pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) + /* * Called from pgtable_init() */ diff --git a/trunk/arch/mips/include/asm/hazards.h b/trunk/arch/mips/include/asm/hazards.h index a12d971db4f9..0eaf77ffbc4f 100644 --- a/trunk/arch/mips/include/asm/hazards.h +++ b/trunk/arch/mips/include/asm/hazards.h @@ -138,8 +138,9 @@ do { \ __instruction_hazard(); \ } while (0) -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY) +#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ + defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/trunk/arch/mips/include/asm/highmem.h b/trunk/arch/mips/include/asm/highmem.h index 4374ab2adc75..25adfb02923d 100644 --- a/trunk/arch/mips/include/asm/highmem.h +++ b/trunk/arch/mips/include/asm/highmem.h @@ -30,8 +30,6 @@ /* declarations for highmem.c */ extern unsigned long highstart_pfn, highend_pfn; -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; extern pte_t *pkmap_page_table; /* @@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() flush_cache_all() +extern void kmap_init(void); + +#define kmap_prot PAGE_KERNEL + #endif /* __KERNEL__ */ #endif /* _ASM_HIGHMEM_H */ diff --git a/trunk/arch/mips/include/asm/ioctl.h b/trunk/arch/mips/include/asm/ioctl.h index 85067e248a83..916163401b2c 100644 --- a/trunk/arch/mips/include/asm/ioctl.h +++ b/trunk/arch/mips/include/asm/ioctl.h @@ -60,12 +60,16 @@ ((nr) << _IOC_NRSHIFT) | \ ((size) << _IOC_SIZESHIFT)) +#ifdef __KERNEL__ /* provoke compile error for invalid uses of size argument */ extern unsigned int __invalid_size_argument_for_IOC; #define _IOC_TYPECHECK(t) \ ((sizeof(t) == sizeof(t[1]) && \ sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ sizeof(t) : __invalid_size_argument_for_IOC) +#else +#define _IOC_TYPECHECK(t) (sizeof(t)) +#endif /* used to create numbers */ #define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0) diff --git a/trunk/arch/mips/include/asm/irq.h b/trunk/arch/mips/include/asm/irq.h index 3214ade02d10..4f1eed107b08 100644 --- a/trunk/arch/mips/include/asm/irq.h +++ b/trunk/arch/mips/include/asm/irq.h @@ -49,7 +49,7 @@ static inline void smtc_im_ack_irq(unsigned int irq) #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF #include -extern void plat_set_irq_affinity(unsigned int irq, +extern int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity); extern void smtc_forward_irq(unsigned int irq); diff --git a/trunk/arch/mips/include/asm/mach-au1x00/au1000.h b/trunk/arch/mips/include/asm/mach-au1x00/au1000.h index 62f91f50b5b5..854e95f1b07c 100644 --- a/trunk/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/trunk/arch/mips/include/asm/mach-au1x00/au1000.h @@ -715,7 +715,7 @@ enum soc_au1500_ints { #ifdef CONFIG_SOC_AU1100 enum soc_au1100_ints { AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1100_UART0_INT, + AU1100_UART0_INT = AU1100_FIRST_INT, AU1100_UART1_INT, AU1100_SD_INT, AU1100_UART3_INT, @@ -902,8 +902,8 @@ enum soc_au1200_ints { AU1000_RTC_MATCH0_INT, AU1000_RTC_MATCH1_INT, AU1000_RTC_MATCH2_INT, - - AU1200_NAND_INT = AU1200_FIRST_INT + 23, + AU1200_GPIO_203, + AU1200_NAND_INT, AU1200_GPIO_204, AU1200_GPIO_205, AU1200_GPIO_206, diff --git a/trunk/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/trunk/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h index 60638b8969ba..5656c72de6d3 100644 --- a/trunk/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h +++ b/trunk/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -46,20 +46,6 @@ #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 #endif -#ifdef CONFIG_PM -/* - * This will enable the device to be powered up when write() or read() - * is called. If this is not defined, the driver will return -EBUSY. - */ -#define WAKE_ON_ACCESS 1 - -typedef struct { - spinlock_t lock; /* Used to block on state transitions */ - au1xxx_power_dev_t *dev; /* Power Managers device structure */ - unsigned stopped; /* Used to signal device is stopped */ -} pm_state; -#endif - typedef struct { u32 tx_dev_id, rx_dev_id, target_dev_id; u32 tx_chan, rx_chan; @@ -72,9 +58,6 @@ typedef struct { #endif int irq; u32 regbase; -#ifdef CONFIG_PM - pm_state pm; -#endif } _auide_hwif; /******************************************************************************/ diff --git a/trunk/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/trunk/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h new file mode 100644 index 000000000000..550a10dc9dba --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wu Zhangjin + * Copyright (C) 2009 Philippe Vachon + * Copyright (C) 2009 Zhang Le + * + * reference: /proc/cpuinfo, + * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy), + * arch/mips/kernel/proc.c(show_cpuinfo), + * loongson2f user manual. + */ + +#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + + +#define cpu_has_32fpr 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_4kex 1 +#define cpu_has_64bits 1 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_counter 1 +#define cpu_has_dc_aliases 1 +#define cpu_has_divec 0 +#define cpu_has_dsp 0 +#define cpu_has_ejtag 0 +#define cpu_has_fpu 1 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_inclusive_pcaches 1 +#define cpu_has_llsc 1 +#define cpu_has_mcheck 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips16 0 +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips3d 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 +#define cpu_has_mipsmt 0 +#define cpu_has_prefetch 0 +#define cpu_has_smartmips 0 +#define cpu_has_tlb 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_userlocal 0 +#define cpu_has_vce 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_watch 1 +#define cpu_icache_snoops_remote_store 1 + +#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */ diff --git a/trunk/arch/mips/include/asm/mipsregs.h b/trunk/arch/mips/include/asm/mipsregs.h index 526f327475ce..32ef8bec5c85 100644 --- a/trunk/arch/mips/include/asm/mipsregs.h +++ b/trunk/arch/mips/include/asm/mipsregs.h @@ -184,12 +184,19 @@ #else #define PM_4K 0x00000000 +#define PM_8K 0x00002000 #define PM_16K 0x00006000 +#define PM_32K 0x0000e000 #define PM_64K 0x0001e000 +#define PM_128K 0x0003e000 #define PM_256K 0x0007e000 +#define PM_512K 0x000fe000 #define PM_1M 0x001fe000 +#define PM_2M 0x003fe000 #define PM_4M 0x007fe000 +#define PM_8M 0x00ffe000 #define PM_16M 0x01ffe000 +#define PM_32M 0x03ffe000 #define PM_64M 0x07ffe000 #define PM_256M 0x1fffe000 #define PM_1G 0x7fffe000 @@ -201,8 +208,12 @@ */ #ifdef CONFIG_PAGE_SIZE_4KB #define PM_DEFAULT_MASK PM_4K +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define PM_DEFAULT_MASK PM_8K #elif defined(CONFIG_PAGE_SIZE_16KB) #define PM_DEFAULT_MASK PM_16K +#elif defined(CONFIG_PAGE_SIZE_32KB) +#define PM_DEFAULT_MASK PM_32K #elif defined(CONFIG_PAGE_SIZE_64KB) #define PM_DEFAULT_MASK PM_64K #else @@ -717,8 +728,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ else \ @@ -726,8 +737,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source ", " #sel "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ local_irq_restore(__flags); \ @@ -1484,14 +1495,15 @@ static inline unsigned int \ set_c0_##name(unsigned int set) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ + new = res | set; \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ @@ -1502,14 +1514,15 @@ static inline unsigned int \ clear_c0_##name(unsigned int clear) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ + new = res & ~clear; \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ @@ -1517,9 +1530,10 @@ clear_c0_##name(unsigned int clear) \ } \ \ static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ +change_c0_##name(unsigned int change, unsigned int newbits) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ @@ -1527,9 +1541,9 @@ change_c0_##name(unsigned int change, unsigned int new) \ \ omt = __dmt(); \ res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ + new = res & ~change; \ + new |= (newbits & change); \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ diff --git a/trunk/arch/mips/include/asm/page.h b/trunk/arch/mips/include/asm/page.h index fe7a88ea066e..9f946e4ca057 100644 --- a/trunk/arch/mips/include/asm/page.h +++ b/trunk/arch/mips/include/asm/page.h @@ -23,6 +23,9 @@ #ifdef CONFIG_PAGE_SIZE_16KB #define PAGE_SHIFT 14 #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define PAGE_SHIFT 15 +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define PAGE_SHIFT 16 #endif diff --git a/trunk/arch/mips/include/asm/pgtable-64.h b/trunk/arch/mips/include/asm/pgtable-64.h index 943515f0ef87..4ed9d1bba2ba 100644 --- a/trunk/arch/mips/include/asm/pgtable-64.h +++ b/trunk/arch/mips/include/asm/pgtable-64.h @@ -83,6 +83,12 @@ #define PMD_ORDER 0 #define PTE_ORDER 0 #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define PGD_ORDER 0 #define PUD_ORDER aieeee_attempt_to_allocate_pud diff --git a/trunk/arch/mips/include/asm/sn/addrs.h b/trunk/arch/mips/include/asm/sn/addrs.h index fec9bdd34913..3a56d90abfa6 100644 --- a/trunk/arch/mips/include/asm/sn/addrs.h +++ b/trunk/arch/mips/include/asm/sn/addrs.h @@ -359,11 +359,11 @@ TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice)) #define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size -#define NMI_OFFSET(nasid, slice) \ +#define SN_NMI_OFFSET(nasid, slice) \ (KLD_NMI(nasid)->offset + \ KLD_NMI(nasid)->stride * (slice)) #define NMI_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice)) + TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice)) #define NMI_SIZE(nasid) KLD_NMI(nasid)->size #define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset diff --git a/trunk/arch/mips/include/asm/sn/nmi.h b/trunk/arch/mips/include/asm/sn/nmi.h index 6b7b0b5f3729..1af49897d4e1 100644 --- a/trunk/arch/mips/include/asm/sn/nmi.h +++ b/trunk/arch/mips/include/asm/sn/nmi.h @@ -3,13 +3,13 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * + * Derived from IRIX , Revision 1.5. + * * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. */ #ifndef __ASM_SN_NMI_H #define __ASM_SN_NMI_H -#ident "$Revision: 1.5 $" - #include /* diff --git a/trunk/arch/mips/include/asm/thread_info.h b/trunk/arch/mips/include/asm/thread_info.h index 676aa2ae1913..143a48136a4b 100644 --- a/trunk/arch/mips/include/asm/thread_info.h +++ b/trunk/arch/mips/include/asm/thread_info.h @@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28"); #ifdef CONFIG_PAGE_SIZE_16KB #define THREAD_SIZE_ORDER (0) #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define THREAD_SIZE_ORDER (0) +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define THREAD_SIZE_ORDER (0) #endif diff --git a/trunk/arch/mips/include/asm/time.h b/trunk/arch/mips/include/asm/time.h index 38a30d2ee959..df6a430de5eb 100644 --- a/trunk/arch/mips/include/asm/time.h +++ b/trunk/arch/mips/include/asm/time.h @@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void); static inline int mips_clockevent_init(void) { -#ifdef CONFIG_CEVT_R4K +#ifdef CONFIG_MIPS_MT_SMTC + extern int smtc_clockevent_init(void); + + return smtc_clockevent_init(); +#elif defined(CONFIG_CEVT_R4K) return r4k_clockevent_init(); #else return -ENXIO; diff --git a/trunk/arch/mips/include/asm/uaccess.h b/trunk/arch/mips/include/asm/uaccess.h index 09ff5bb17445..c2d53c18fd36 100644 --- a/trunk/arch/mips/include/asm/uaccess.h +++ b/trunk/arch/mips/include/asm/uaccess.h @@ -105,10 +105,20 @@ #define __access_mask get_fs().seg #define __access_ok(addr, size, mask) \ - (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0) +({ \ + unsigned long __addr = (unsigned long) (addr); \ + unsigned long __size = size; \ + unsigned long __mask = mask; \ + unsigned long __ok; \ + \ + __chk_user_ptr(addr); \ + __ok = (signed long)(__mask & (__addr | (__addr + __size) | \ + __ua_size(__size))); \ + __ok == 0; \ +}) #define access_ok(type, addr, size) \ - likely(__access_ok((unsigned long)(addr), (size), __access_mask)) + likely(__access_ok((addr), (size), __access_mask)) /* * put_user: - Write a simple value into user space. @@ -225,6 +235,7 @@ do { \ ({ \ int __gu_err; \ \ + __chk_user_ptr(ptr); \ __get_user_common((x), size, ptr); \ __gu_err; \ }) @@ -234,6 +245,7 @@ do { \ int __gu_err = -EFAULT; \ const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ \ + might_fault(); \ if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ __get_user_common((x), size, __gu_ptr); \ \ @@ -305,6 +317,7 @@ do { \ __typeof__(*(ptr)) __pu_val; \ int __pu_err = 0; \ \ + __chk_user_ptr(ptr); \ __pu_val = (x); \ switch (size) { \ case 1: __put_user_asm("sb", ptr); break; \ @@ -322,6 +335,7 @@ do { \ __typeof__(*(ptr)) __pu_val = (x); \ int __pu_err = -EFAULT; \ \ + might_fault(); \ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ switch (size) { \ case 1: __put_user_asm("sb", __pu_addr); break; \ @@ -696,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); const void *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ __cu_len; \ }) @@ -752,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \ + if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) { \ + might_fault(); \ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -831,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ __cu_len; \ @@ -862,17 +877,31 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \ + if (access_ok(VERIFY_READ, __cu_from, __cu_len)) { \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) -#define __copy_in_user(to, from, n) __copy_from_user(to, from, n) +#define __copy_in_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + might_fault(); \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) #define copy_in_user(to, from, n) \ ({ \ @@ -880,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ - access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \ + access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -907,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size) { __kernel_size_t res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, $0\n\t" @@ -926,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size) void __user * __cl_addr = (addr); \ unsigned long __cl_size = (n); \ if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_addr, __cl_size)) \ __cl_size = __clear_user(__cl_addr, __cl_size); \ __cl_size; \ }) @@ -956,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -993,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1012,7 +1042,7 @@ static inline long __strlen_user(const char __user *s) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" __MODULE_JAL(__strlen_user_nocheck_asm) @@ -1042,7 +1072,7 @@ static inline long strlen_user(const char __user *s) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" __MODULE_JAL(__strlen_user_asm) @@ -1059,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1090,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" diff --git a/trunk/arch/mips/kernel/cevt-smtc.c b/trunk/arch/mips/kernel/cevt-smtc.c index 6d45e24db5bf..df6f5bc60572 100644 --- a/trunk/arch/mips/kernel/cevt-smtc.c +++ b/trunk/arch/mips/kernel/cevt-smtc.c @@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id) } -int __cpuinit mips_clockevent_init(void) +int __cpuinit smtc_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; unsigned int cpu = smp_processor_id(); diff --git a/trunk/arch/mips/kernel/irq-gic.c b/trunk/arch/mips/kernel/irq-gic.c index 87deb8f6c458..3f43c2e3aa5a 100644 --- a/trunk/arch/mips/kernel/irq-gic.c +++ b/trunk/arch/mips/kernel/irq-gic.c @@ -155,7 +155,7 @@ static void gic_unmask_irq(unsigned int irq) static DEFINE_SPINLOCK(gic_lock); -static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) +static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) { cpumask_t tmp = CPU_MASK_NONE; unsigned long flags; @@ -166,7 +166,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) cpumask_and(&tmp, cpumask, cpu_online_mask); if (cpus_empty(tmp)) - return; + return -1; /* Assumption : cpumask refers to a single CPU */ spin_lock_irqsave(&gic_lock, flags); @@ -190,6 +190,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) cpumask_copy(irq_desc[irq].affinity, cpumask); spin_unlock_irqrestore(&gic_lock, flags); + return 0; } #endif diff --git a/trunk/arch/mips/kernel/module.c b/trunk/arch/mips/kernel/module.c index 1f60e27523d9..3e9100dcc12d 100644 --- a/trunk/arch/mips/kernel/module.c +++ b/trunk/arch/mips/kernel/module.c @@ -68,8 +68,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, diff --git a/trunk/arch/mips/kernel/proc.c b/trunk/arch/mips/kernel/proc.c index 26760cad8b69..e0a4ac18fa07 100644 --- a/trunk/arch/mips/kernel/proc.c +++ b/trunk/arch/mips/kernel/proc.c @@ -42,7 +42,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, fmt, __cpu_name[n], (version >> 4) & 0x0f, version & 0x0f, (fp_vers >> 4) & 0x0f, fp_vers & 0x0f); - seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n", + seq_printf(m, "BogoMIPS\t\t: %u.%02u\n", cpu_data[n].udelay_val / (500000/HZ), (cpu_data[n].udelay_val / (5000/HZ)) % 100); seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no"); diff --git a/trunk/arch/mips/kernel/scall64-n32.S b/trunk/arch/mips/kernel/scall64-n32.S index c2c16ef9218f..93cc672f4522 100644 --- a/trunk/arch/mips/kernel/scall64-n32.S +++ b/trunk/arch/mips/kernel/scall64-n32.S @@ -405,8 +405,8 @@ EXPORT(sysn32_call_table) PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create - PTR sys_timerfd_gettime /* 5285 */ - PTR sys_timerfd_settime + PTR compat_sys_timerfd_gettime /* 5285 */ + PTR compat_sys_timerfd_settime PTR sys_signalfd4 PTR sys_eventfd2 PTR sys_epoll_create1 diff --git a/trunk/arch/mips/kernel/scall64-o32.S b/trunk/arch/mips/kernel/scall64-o32.S index 002fac27021e..a5598b2339dd 100644 --- a/trunk/arch/mips/kernel/scall64-o32.S +++ b/trunk/arch/mips/kernel/scall64-o32.S @@ -525,8 +525,8 @@ sys_call_table: PTR sys_eventfd PTR sys32_fallocate /* 4320 */ PTR sys_timerfd_create - PTR sys_timerfd_gettime - PTR sys_timerfd_settime + PTR compat_sys_timerfd_gettime + PTR compat_sys_timerfd_settime PTR compat_sys_signalfd4 PTR sys_eventfd2 /* 4325 */ PTR sys_epoll_create1 diff --git a/trunk/arch/mips/kernel/unaligned.c b/trunk/arch/mips/kernel/unaligned.c index bf4c4a979abb..67bd626942ab 100644 --- a/trunk/arch/mips/kernel/unaligned.c +++ b/trunk/arch/mips/kernel/unaligned.c @@ -482,19 +482,19 @@ static void emulate_load_store_insn(struct pt_regs *regs, return; die_if_kernel("Unhandled kernel unaligned access", regs); - send_sig(SIGSEGV, current, 1); + force_sig(SIGSEGV, current); return; sigbus: die_if_kernel("Unhandled kernel unaligned access", regs); - send_sig(SIGBUS, current, 1); + force_sig(SIGBUS, current); return; sigill: die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs); - send_sig(SIGILL, current, 1); + force_sig(SIGILL, current); } asmlinkage void do_ade(struct pt_regs *regs) diff --git a/trunk/arch/mips/lib/Makefile b/trunk/arch/mips/lib/Makefile index c13c7ad2cdae..2adead5a8a37 100644 --- a/trunk/arch/mips/lib/Makefile +++ b/trunk/arch/mips/lib/Makefile @@ -2,8 +2,8 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \ - strncpy_user.o strnlen_user.o uncached.o +lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \ + strlen_user.o strncpy_user.o strnlen_user.o uncached.o obj-y += iomap.o obj-$(CONFIG_PCI) += iomap-pci.o diff --git a/trunk/arch/mips/lib/delay.c b/trunk/arch/mips/lib/delay.c new file mode 100644 index 000000000000..f69c6b569eb3 --- /dev/null +++ b/trunk/arch/mips/lib/delay.c @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 by Waldorf Electronics + * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#include +#include +#include + +#include +#include + +inline void __delay(unsigned int loops) +{ + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " subu %0, 1 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops)); +} +EXPORT_SYMBOL(__delay); + +/* + * Division by multiplication: you don't have to worry about + * loss of precision. + * + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +void __udelay(unsigned long us) +{ + unsigned int lpj = current_cpu_data.udelay_val; + + __delay((us * 0x000010c7 * HZ * lpj) >> 32); +} +EXPORT_SYMBOL(__udelay); + +void __ndelay(unsigned long ns) +{ + unsigned int lpj = current_cpu_data.udelay_val; + + __delay((us * 0x00000005 * HZ * lpj) >> 32); +} +EXPORT_SYMBOL(__ndelay); diff --git a/trunk/arch/mips/lib/dump_tlb.c b/trunk/arch/mips/lib/dump_tlb.c index 779821cd54ab..3f69725556af 100644 --- a/trunk/arch/mips/lib/dump_tlb.c +++ b/trunk/arch/mips/lib/dump_tlb.c @@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask) case PM_16K: return "16kb"; case PM_64K: return "64kb"; case PM_256K: return "256kb"; +#ifdef CONFIG_CPU_CAVIUM_OCTEON + case PM_8K: return "8kb"; + case PM_32K: return "32kb"; + case PM_128K: return "128kb"; + case PM_512K: return "512kb"; + case PM_2M: return "2Mb"; + case PM_8M: return "8Mb"; + case PM_32M: return "32Mb"; +#endif #ifndef CONFIG_CPU_VR41XX case PM_1M: return "1Mb"; case PM_4M: return "4Mb"; diff --git a/trunk/arch/mips/mm/c-r4k.c b/trunk/arch/mips/mm/c-r4k.c index 58d9075e86fe..171951d2305b 100644 --- a/trunk/arch/mips/mm/c-r4k.c +++ b/trunk/arch/mips/mm/c-r4k.c @@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void) printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n", icache_size >> 10, - cpu_has_vtag_icache ? "VIVT" : "VIPT", + c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT", way_string[c->icache.ways], c->icache.linesz); printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n", diff --git a/trunk/arch/mips/mm/dma-default.c b/trunk/arch/mips/mm/dma-default.c index bed56f1ac837..4fdb7f5216b9 100644 --- a/trunk/arch/mips/mm/dma-default.c +++ b/trunk/arch/mips/mm/dma-default.c @@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long addr; addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); + __dma_sync(addr, size, direction); } return plat_map_dma_mem_page(dev, page) + offset; @@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, EXPORT_SYMBOL(dma_map_page); -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { - unsigned long addr; - - addr = dma_addr_to_virt(dma_address); - dma_cache_wback_inv(addr, size); - } - - plat_unmap_dma_mem(dev, dma_address); -} - -EXPORT_SYMBOL(dma_unmap_page); - void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, enum dma_data_direction direction) { diff --git a/trunk/arch/mips/mm/highmem.c b/trunk/arch/mips/mm/highmem.c index 4481656d1065..2b1309b2580a 100644 --- a/trunk/arch/mips/mm/highmem.c +++ b/trunk/arch/mips/mm/highmem.c @@ -1,7 +1,12 @@ #include #include +#include #include +static pte_t *kmap_pte; + +unsigned long highstart_pfn, highend_pfn; + void *__kmap(struct page *page) { void *addr; @@ -14,6 +19,7 @@ void *__kmap(struct page *page) return addr; } +EXPORT_SYMBOL(__kmap); void __kunmap(struct page *page) { @@ -22,6 +28,7 @@ void __kunmap(struct page *page) return; kunmap_high(page); } +EXPORT_SYMBOL(__kunmap); /* * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because @@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type) #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(!pte_none(*(kmap_pte - idx))); #endif - set_pte(kmap_pte-idx, mk_pte(page, kmap_prot)); + set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL)); local_flush_tlb_one((unsigned long)vaddr); return (void*) vaddr; } +EXPORT_SYMBOL(__kmap_atomic); void __kunmap_atomic(void *kvaddr, enum km_type type) { @@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type) pagefault_enable(); } +EXPORT_SYMBOL(__kunmap_atomic); /* * This is the same as kmap_atomic() but can map memory that doesn't @@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) debug_kmap_atomic(type); idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot)); + set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL)); flush_tlb_one(vaddr); return (void*) vaddr; @@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr) return pte_page(*pte); } -EXPORT_SYMBOL(__kmap); -EXPORT_SYMBOL(__kunmap); -EXPORT_SYMBOL(__kmap_atomic); -EXPORT_SYMBOL(__kunmap_atomic); +void __init kmap_init(void) +{ + unsigned long kmap_vstart; + + /* cache the first kmap pte */ + kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN); + kmap_pte = kmap_get_fixmap_pte(kmap_vstart); +} diff --git a/trunk/arch/mips/mm/init.c b/trunk/arch/mips/mm/init.c index d9348946a19e..c5511294a9ee 100644 --- a/trunk/arch/mips/mm/init.c +++ b/trunk/arch/mips/mm/init.c @@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void) return 1UL << order; } -/* - * These are almost like kmap_atomic / kunmap_atmic except they take an - * additional address argument as the hint. - */ - -#define kmap_get_fixmap_pte(vaddr) \ - pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) - #ifdef CONFIG_MIPS_MT_SMTC static pte_t *kmap_coherent_pte; static void __init kmap_coherent_init(void) @@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma, } } -#ifdef CONFIG_HIGHMEM -unsigned long highstart_pfn, highend_pfn; - -pte_t *kmap_pte; -pgprot_t kmap_prot; - -static void __init kmap_init(void) -{ - unsigned long kmap_vstart; - - /* cache the first kmap pte */ - kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN); - kmap_pte = kmap_get_fixmap_pte(kmap_vstart); - - kmap_prot = PAGE_KERNEL; -} -#endif /* CONFIG_HIGHMEM */ - void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { diff --git a/trunk/arch/mips/mm/sc-rm7k.c b/trunk/arch/mips/mm/sc-rm7k.c index e3abfb2d7e86..de69bfbf506e 100644 --- a/trunk/arch/mips/mm/sc-rm7k.c +++ b/trunk/arch/mips/mm/sc-rm7k.c @@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size; #include -int rm7k_tcache_enabled; +static int rm7k_tcache_enabled; /* * Writeback and invalidate the primary cache dcache before DMA. @@ -121,7 +121,7 @@ static void rm7k_sc_disable(void) clear_c0_config(RM7K_CONF_SE); } -struct bcache_ops rm7k_sc_ops = { +static struct bcache_ops rm7k_sc_ops = { .bc_enable = rm7k_sc_enable, .bc_disable = rm7k_sc_disable, .bc_wback_inv = rm7k_sc_wback_inv, diff --git a/trunk/arch/mips/mm/tlb-r3k.c b/trunk/arch/mips/mm/tlb-r3k.c index f0cf46adb978..1c0048a6f5cf 100644 --- a/trunk/arch/mips/mm/tlb-r3k.c +++ b/trunk/arch/mips/mm/tlb-r3k.c @@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", @@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end); diff --git a/trunk/arch/mips/mm/tlb-r4k.c b/trunk/arch/mips/mm/tlb-r4k.c index 9619f66e531e..892be426787c 100644 --- a/trunk/arch/mips/mm/tlb-r4k.c +++ b/trunk/arch/mips/mm/tlb-r4k.c @@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; @@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; diff --git a/trunk/arch/mips/mm/tlb-r8k.c b/trunk/arch/mips/mm/tlb-r8k.c index 4f01a3be215c..4ec95cc2df2f 100644 --- a/trunk/arch/mips/mm/tlb-r8k.c +++ b/trunk/arch/mips/mm/tlb-r8k.c @@ -111,8 +111,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, /* Usable for KV1 addresses only! */ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; diff --git a/trunk/arch/mips/mti-malta/malta-smtc.c b/trunk/arch/mips/mti-malta/malta-smtc.c index 5ba31888fefb..499ffe5475df 100644 --- a/trunk/arch/mips/mti-malta/malta-smtc.c +++ b/trunk/arch/mips/mti-malta/malta-smtc.c @@ -114,7 +114,7 @@ struct plat_smp_ops msmtc_smp_ops = { */ -void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) +int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) { cpumask_t tmask; int cpu = 0; @@ -156,5 +156,7 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) /* Do any generic SMTC IRQ affinity setup */ smtc_set_irq_affinity(irq, tmask); + + return 0; } #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/trunk/arch/mips/pmc-sierra/Kconfig b/trunk/arch/mips/pmc-sierra/Kconfig index 90261b83db04..c139988bb85d 100644 --- a/trunk/arch/mips/pmc-sierra/Kconfig +++ b/trunk/arch/mips/pmc-sierra/Kconfig @@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA endchoice -menu "Options for PMC-Sierra MSP chipsets" - depends on PMC_MSP - -config PMC_MSP_EMBEDDED_ROOTFS - bool "Root filesystem embedded in kernel image" - select MTD - select MTD_BLOCK - select MTD_PMC_MSP_RAMROOT - select MTD_RAM - -endmenu - config HYPERTRANSPORT bool "Hypertransport Support for PMC-Sierra Yosemite" depends on PMC_YOSEMITE diff --git a/trunk/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/trunk/arch/mips/pmc-sierra/msp71xx/msp_prom.c index e5bd5481d8db..c317a3623ce9 100644 --- a/trunk/arch/mips/pmc-sierra/msp71xx/msp_prom.c +++ b/trunk/arch/mips/pmc-sierra/msp71xx/msp_prom.c @@ -40,12 +40,6 @@ #include #include #include -#ifdef CONFIG_CRAMFS -#include -#endif -#ifdef CONFIG_SQUASHFS -#include -#endif #include #include @@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void) char *str; unsigned int memsize; unsigned int heaptop; -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT - void *ramroot_start; - unsigned long ramroot_size; -#endif int i; str = prom_getenv(memsz_env); @@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void) i++; /* 3 */ mdesc[i].type = BOOT_MEM_RESERVED; mdesc[i].base = CPHYSADDR((u32)_text); -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT - if (get_ramroot(&ramroot_start, &ramroot_size)) { - /* - * Rootfs in RAM -- follows kernel - * Combine rootfs image with kernel block so a - * page (4k) isn't wasted between memory blocks - */ - mdesc[i].size = CPHYSADDR(PAGE_ALIGN( - (u32)ramroot_start + ramroot_size)) - mdesc[i].base; - } else -#endif - mdesc[i].size = CPHYSADDR(PAGE_ALIGN( - (u32)_end)) - mdesc[i].base; + mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base; /* Remainder of RAM -- under memsize */ i++; /* 5 */ @@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void) return &mdesc[0]; } - -/* rootfs functions */ -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT -bool get_ramroot(void **start, unsigned long *size) -{ - extern char _end[]; - - /* Check for start following the end of the kernel */ - void *check_start = (void *)_end; - - /* Check for supported rootfs types */ -#ifdef CONFIG_CRAMFS - if (*(__u32 *)check_start == CRAMFS_MAGIC) { - /* Get CRAMFS size */ - *start = check_start; - *size = PAGE_ALIGN(((struct cramfs_super *) - check_start)->size); - - return true; - } -#endif -#ifdef CONFIG_SQUASHFS - if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) { - /* Get SQUASHFS size */ - *start = check_start; - *size = PAGE_ALIGN(((struct squashfs_super_block *) - check_start)->bytes_used); - - return true; - } -#endif - - return false; -} -EXPORT_SYMBOL(get_ramroot); -#endif diff --git a/trunk/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/trunk/arch/mips/pmc-sierra/msp71xx/msp_setup.c index c93675615f5d..a54e85b3cf29 100644 --- a/trunk/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/trunk/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -21,7 +21,6 @@ #if defined(CONFIG_PMC_MSP7120_GW) #include -#include #define MSP_BOARD_RESET_GPIO 9 #endif @@ -88,11 +87,8 @@ void msp7120_reset(void) * as GPIO char driver may not be enabled and it would look up * data inRAM! */ - set_value_reg32(GPIO_CFG3_REG, - basic_mode_mask(MSP_BOARD_RESET_GPIO), - basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO)); - set_reg32(GPIO_DATA3_REG, - basic_data_mask(MSP_BOARD_RESET_GPIO)); + set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000); + set_reg32(GPIO_DATA3_REG, 8); /* * In case GPIO9 doesn't reset the board (jumper configurable!) diff --git a/trunk/arch/mips/pmc-sierra/msp71xx/msp_time.c b/trunk/arch/mips/pmc-sierra/msp71xx/msp_time.c index 7cfeda5a651b..cca64e15f57f 100644 --- a/trunk/arch/mips/pmc-sierra/msp71xx/msp_time.c +++ b/trunk/arch/mips/pmc-sierra/msp71xx/msp_time.c @@ -81,10 +81,7 @@ void __init plat_time_init(void) mips_hpt_frequency = cpu_rate/2; } -void __init plat_timer_setup(struct irqaction *irq) +unsigned int __init get_c0_compare_int(void) { -#ifdef CONFIG_IRQ_MSP_CIC - /* we are using the vpe0 counter for timer interrupts */ - setup_irq(MSP_INT_VPE0_TIMER, irq); -#endif + return MSP_INT_VPE0_TIMER; } diff --git a/trunk/arch/mips/sgi-ip22/ip22-reset.c b/trunk/arch/mips/sgi-ip22/ip22-reset.c index 4ad5c3393fd3..45b6694c2079 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-reset.c +++ b/trunk/arch/mips/sgi-ip22/ip22-reset.c @@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id) if (sgint->istat1 & SGINT_ISTAT1_PWR) { /* Wait until interrupt goes away */ - disable_irq(SGI_PANEL_IRQ); + disable_irq_nosync(SGI_PANEL_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 5; diff --git a/trunk/arch/mips/sgi-ip32/ip32-berr.c b/trunk/arch/mips/sgi-ip32/ip32-berr.c index a278e918a019..afc1cadbba37 100644 --- a/trunk/arch/mips/sgi-ip32/ip32-berr.c +++ b/trunk/arch/mips/sgi-ip32/ip32-berr.c @@ -16,7 +16,7 @@ #include #include -int ip32_be_handler(struct pt_regs *regs, int is_fixup) +static int ip32_be_handler(struct pt_regs *regs, int is_fixup) { int data = regs->cp0_cause & 4; diff --git a/trunk/arch/mips/sgi-ip32/ip32-irq.c b/trunk/arch/mips/sgi-ip32/ip32-irq.c index 83a0b3c359da..5c2bf111ca67 100644 --- a/trunk/arch/mips/sgi-ip32/ip32-irq.c +++ b/trunk/arch/mips/sgi-ip32/ip32-irq.c @@ -112,13 +112,13 @@ static void inline flush_mace_bus(void) extern irqreturn_t crime_memerr_intr(int irq, void *dev_id); extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); -struct irqaction memerr_irq = { +static struct irqaction memerr_irq = { .handler = crime_memerr_intr, .flags = IRQF_DISABLED, .name = "CRIME memory error", }; -struct irqaction cpuerr_irq = { +static struct irqaction cpuerr_irq = { .handler = crime_cpuerr_intr, .flags = IRQF_DISABLED, .name = "CRIME CPU error", diff --git a/trunk/arch/mips/sgi-ip32/ip32-reset.c b/trunk/arch/mips/sgi-ip32/ip32-reset.c index b6cab089561e..9b95d80ebc6e 100644 --- a/trunk/arch/mips/sgi-ip32/ip32-reset.c +++ b/trunk/arch/mips/sgi-ip32/ip32-reset.c @@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void) static void ip32_machine_power_off(void) { - volatile unsigned char reg_a, xctrl_a, xctrl_b; + unsigned char reg_a, xctrl_a, xctrl_b; disable_irq(MACEISA_RTC_IRQ); reg_a = CMOS_READ(RTC_REG_A); @@ -91,9 +91,10 @@ static void blink_timeout(unsigned long data) static void debounce(unsigned long data) { - volatile unsigned char reg_a, reg_c, xctrl_a; + unsigned char reg_a, reg_c, xctrl_a; reg_c = CMOS_READ(RTC_INTR_FLAGS); + reg_a = CMOS_READ(RTC_REG_A); CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A); wbflush(); xctrl_a = CMOS_READ(DS_B1_XCTRL4A); @@ -137,7 +138,7 @@ static inline void ip32_power_button(void) static irqreturn_t ip32_rtc_int(int irq, void *dev_id) { - volatile unsigned char reg_c; + unsigned char reg_c; reg_c = CMOS_READ(RTC_INTR_FLAGS); if (!(reg_c & RTC_IRQF)) { @@ -145,7 +146,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id) "%s: RTC IRQ without RTC_IRQF\n", __func__); } /* Wait until interrupt goes away */ - disable_irq(MACEISA_RTC_IRQ); + disable_irq_nosync(MACEISA_RTC_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 50; diff --git a/trunk/arch/mips/sibyte/bcm1480/irq.c b/trunk/arch/mips/sibyte/bcm1480/irq.c index 352352b3cb2f..690de06bde90 100644 --- a/trunk/arch/mips/sibyte/bcm1480/irq.c +++ b/trunk/arch/mips/sibyte/bcm1480/irq.c @@ -50,7 +50,7 @@ static void enable_bcm1480_irq(unsigned int irq); static void disable_bcm1480_irq(unsigned int irq); static void ack_bcm1480_irq(unsigned int irq); #ifdef CONFIG_SMP -static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask); +static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask); #endif #ifdef CONFIG_PCI @@ -109,17 +109,16 @@ void bcm1480_unmask_irq(int cpu, int irq) } #ifdef CONFIG_SMP -static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) +static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on, k; u64 cur_ints; - struct irq_desc *desc = irq_desc + irq; unsigned long flags; unsigned int irq_dirty; if (cpumask_weight(mask) != 1) { printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); - return; + return -1; } i = cpumask_first(mask); @@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&desc->lock, flags); - spin_lock(&bcm1480_imr_lock); + spin_lock_irqsave(&bcm1480_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = bcm1480_irq_owner[irq]; @@ -153,8 +151,9 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); } } - spin_unlock(&bcm1480_imr_lock); - spin_unlock_irqrestore(&desc->lock, flags); + spin_unlock_irqrestore(&bcm1480_imr_lock, flags); + + return 0; } #endif diff --git a/trunk/arch/mips/sibyte/cfe/setup.c b/trunk/arch/mips/sibyte/cfe/setup.c index 3de30f79db3f..eb5396cf81bb 100644 --- a/trunk/arch/mips/sibyte/cfe/setup.c +++ b/trunk/arch/mips/sibyte/cfe/setup.c @@ -288,13 +288,7 @@ void __init prom_init(void) */ cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { - if (argc < 0) { - /* - * It's OK for direct boot to not provide a - * command line - */ - strcpy(arcs_cmdline, "root=/dev/ram0 "); - } else { + if (argc >= 0) { /* The loader should have set the command line */ /* too early for panic to do any good */ printk("LINUX_CMDLINE not defined in cfe."); diff --git a/trunk/arch/mips/sibyte/sb1250/irq.c b/trunk/arch/mips/sibyte/sb1250/irq.c index c08ff582da6f..409dec798863 100644 --- a/trunk/arch/mips/sibyte/sb1250/irq.c +++ b/trunk/arch/mips/sibyte/sb1250/irq.c @@ -50,7 +50,7 @@ static void enable_sb1250_irq(unsigned int irq); static void disable_sb1250_irq(unsigned int irq); static void ack_sb1250_irq(unsigned int irq); #ifdef CONFIG_SMP -static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask); +static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask); #endif #ifdef CONFIG_SIBYTE_HAS_LDT @@ -103,26 +103,24 @@ void sb1250_unmask_irq(int cpu, int irq) } #ifdef CONFIG_SMP -static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) +static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on; u64 cur_ints; - struct irq_desc *desc = irq_desc + irq; unsigned long flags; i = cpumask_first(mask); if (cpumask_weight(mask) > 1) { printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); - return; + return -1; } /* Convert logical CPU to physical CPU */ cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&desc->lock, flags); - spin_lock(&sb1250_imr_lock); + spin_lock_irqsave(&sb1250_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = sb1250_irq_owner[irq]; @@ -144,8 +142,9 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); } - spin_unlock(&sb1250_imr_lock); - spin_unlock_irqrestore(&desc->lock, flags); + spin_unlock_irqrestore(&sb1250_imr_lock, flags); + + return 0; } #endif diff --git a/trunk/arch/mips/txx9/generic/setup_tx4927.c b/trunk/arch/mips/txx9/generic/setup_tx4927.c index 914e93c62639..1093549df1a8 100644 --- a/trunk/arch/mips/txx9/generic/setup_tx4927.c +++ b/trunk/arch/mips/txx9/generic/setup_tx4927.c @@ -88,7 +88,7 @@ void __init tx4927_setup(void) { int i; __u32 divmode; - int cpuclk = 0; + unsigned int cpuclk = 0; u64 ccfg; txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE, diff --git a/trunk/arch/mips/txx9/generic/setup_tx4938.c b/trunk/arch/mips/txx9/generic/setup_tx4938.c index f0844f891f0b..3925219b8973 100644 --- a/trunk/arch/mips/txx9/generic/setup_tx4938.c +++ b/trunk/arch/mips/txx9/generic/setup_tx4938.c @@ -93,7 +93,7 @@ void __init tx4938_setup(void) { int i; __u32 divmode; - int cpuclk = 0; + unsigned int cpuclk = 0; u64 ccfg; txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE, diff --git a/trunk/arch/mips/txx9/generic/setup_tx4939.c b/trunk/arch/mips/txx9/generic/setup_tx4939.c index 7a25b573e9b0..c2bf150c8838 100644 --- a/trunk/arch/mips/txx9/generic/setup_tx4939.c +++ b/trunk/arch/mips/txx9/generic/setup_tx4939.c @@ -114,7 +114,7 @@ void __init tx4939_setup(void) int i; __u32 divmode; __u64 pcfg; - int cpuclk = 0; + unsigned int cpuclk = 0; txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE, TX4939_REG_SIZE); diff --git a/trunk/arch/mips/txx9/rbtx4939/setup.c b/trunk/arch/mips/txx9/rbtx4939/setup.c index 011e1e332f47..4199c6fd4d1d 100644 --- a/trunk/arch/mips/txx9/rbtx4939/setup.c +++ b/trunk/arch/mips/txx9/rbtx4939/setup.c @@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void) } struct txx9_board_vec rbtx4939_vec __initdata = { - .system = "Tothiba RBTX4939", + .system = "Toshiba RBTX4939", .prom_init = rbtx4939_prom_init, .mem_setup = rbtx4939_setup, .irq_setup = rbtx4939_irq_setup, diff --git a/trunk/arch/mn10300/Kconfig b/trunk/arch/mn10300/Kconfig index 355926730e8d..89faacad5d17 100644 --- a/trunk/arch/mn10300/Kconfig +++ b/trunk/arch/mn10300/Kconfig @@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration" config MN10300 def_bool y select HAVE_OPROFILE + select HAVE_ARCH_TRACEHOOK config AM33 def_bool y diff --git a/trunk/arch/mn10300/configs/asb2303_defconfig b/trunk/arch/mn10300/configs/asb2303_defconfig index 3aa8906b3dea..3acce23708b0 100644 --- a/trunk/arch/mn10300/configs/asb2303_defconfig +++ b/trunk/arch/mn10300/configs/asb2303_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Tue Feb 19 18:52:24 2008 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 11:13:22 2009 # CONFIG_MN10300=y CONFIG_AM33=y @@ -18,7 +18,6 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_BUG=y CONFIG_QUICKLIST=y CONFIG_ARCH_HAS_ILOG2_U32=y -# CONFIG_ARCH_SUPPORTS_AOUT is not set CONFIG_GENERIC_HARDIRQS=y # CONFIG_HOTPLUG_CPU is not set CONFIG_HZ=1000 @@ -40,52 +39,58 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set -CONFIG_OPROFILE=y -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set +# CONFIG_FREEZER is not set # # Matsushita MN10300 system setup @@ -107,7 +112,6 @@ CONFIG_INTERRUPT_VECTOR_BASE=0x90000000 CONFIG_KERNEL_TEXT_ADDRESS=0x90001000 CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000 CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y CONFIG_MN10300_CURRENT_IN_E2=y CONFIG_MN10300_USING_JTAG=y CONFIG_MN10300_RTC=y @@ -135,13 +139,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # Power management options @@ -152,11 +158,9 @@ CONFIG_VIRT_TO_BUS=y # Executable formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -194,8 +198,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -203,6 +205,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -212,7 +215,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -223,14 +228,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -255,6 +254,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -297,9 +297,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # @@ -318,15 +316,24 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set # # SCSI device support @@ -334,7 +341,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -345,10 +352,15 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -358,6 +370,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -382,6 +398,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -403,6 +420,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -411,34 +429,43 @@ CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -453,21 +480,17 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -480,21 +503,24 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -506,19 +532,17 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_ROMFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -535,12 +559,16 @@ CONFIG_SUNRPC=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # @@ -548,26 +576,26 @@ CONFIG_MAGIC_SYSRQ=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Profiling support -# +CONFIG_NLATTR=y diff --git a/trunk/arch/mn10300/include/asm/elf.h b/trunk/arch/mn10300/include/asm/elf.h index bf09f8bb392e..49105462e6fc 100644 --- a/trunk/arch/mn10300/include/asm/elf.h +++ b/trunk/arch/mn10300/include/asm/elf.h @@ -34,7 +34,7 @@ */ typedef unsigned long elf_greg_t; -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +#define ELF_NGREG ((sizeof(struct pt_regs) / sizeof(elf_greg_t)) - 1) typedef elf_greg_t elf_gregset_t[ELF_NGREG]; #define ELF_NFPREG 32 @@ -76,6 +76,7 @@ do { \ } while (0) #define USE_ELF_CORE_DUMP +#define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE 4096 /* diff --git a/trunk/arch/mn10300/include/asm/processor.h b/trunk/arch/mn10300/include/asm/processor.h index 73239271873d..f7d4b0d285e8 100644 --- a/trunk/arch/mn10300/include/asm/processor.h +++ b/trunk/arch/mn10300/include/asm/processor.h @@ -143,13 +143,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); unsigned long get_wchan(struct task_struct *p); -#define task_pt_regs(task) \ -({ \ - struct pt_regs *__regs__; \ - __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \ - __regs__ - 1; \ -}) - +#define task_pt_regs(task) ((task)->thread.uregs) #define KSTK_EIP(task) (task_pt_regs(task)->pc) #define KSTK_ESP(task) (task_pt_regs(task)->sp) diff --git a/trunk/arch/mn10300/include/asm/ptrace.h b/trunk/arch/mn10300/include/asm/ptrace.h index 7b06cc623d8b..921942ed1b03 100644 --- a/trunk/arch/mn10300/include/asm/ptrace.h +++ b/trunk/arch/mn10300/include/asm/ptrace.h @@ -91,9 +91,17 @@ extern struct pt_regs *__frame; /* current frame pointer */ #if defined(__KERNEL__) #if !defined(__ASSEMBLY__) +struct task_struct; + #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) #define instruction_pointer(regs) ((regs)->pc) +#define user_stack_pointer(regs) ((regs)->sp) extern void show_regs(struct pt_regs *); + +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + #endif /* !__ASSEMBLY */ #define profile_pc(regs) ((regs)->pc) diff --git a/trunk/arch/mn10300/kernel/entry.S b/trunk/arch/mn10300/kernel/entry.S index 3dc3e462f92a..7408a27199f3 100644 --- a/trunk/arch/mn10300/kernel/entry.S +++ b/trunk/arch/mn10300/kernel/entry.S @@ -76,7 +76,7 @@ ENTRY(system_call) cmp nr_syscalls,d0 bcc syscall_badsys btst _TIF_SYSCALL_TRACE,(TI_flags,a2) - bne syscall_trace_entry + bne syscall_entry_trace syscall_call: add d0,d0,a1 add a1,a1 @@ -104,11 +104,10 @@ restore_all: syscall_exit_work: btst _TIF_SYSCALL_TRACE,d2 beq work_pending - __sti # could let do_syscall_trace() call + __sti # could let syscall_trace_exit() call # schedule() instead mov fp,d0 - mov 1,d1 - call do_syscall_trace[],0 # do_syscall_trace(regs,entryexit) + call syscall_trace_exit[],0 # do_syscall_trace(regs) jmp resume_userspace ALIGN @@ -138,13 +137,11 @@ work_notifysig: jmp resume_userspace # perform syscall entry tracing -syscall_trace_entry: +syscall_entry_trace: mov -ENOSYS,d0 mov d0,(REG_D0,fp) mov fp,d0 - clr d1 - call do_syscall_trace[],0 - mov (REG_ORIG_D0,fp),d0 + call syscall_trace_entry[],0 # returns the syscall number to actually use mov (REG_D1,fp),d1 cmp nr_syscalls,d0 bcs syscall_call diff --git a/trunk/arch/mn10300/kernel/head.S b/trunk/arch/mn10300/kernel/head.S index 8a8309fbe3c4..14f27f3bfaf4 100644 --- a/trunk/arch/mn10300/kernel/head.S +++ b/trunk/arch/mn10300/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the Licence, or (at your option) any later version. */ +#include #include #include #include @@ -19,7 +20,7 @@ #include #include - .section .text.head,"ax" + __HEAD ############################################################################### # diff --git a/trunk/arch/mn10300/kernel/module.c b/trunk/arch/mn10300/kernel/module.c index 6b287f2e8e84..4fa0e3648d8e 100644 --- a/trunk/arch/mn10300/kernel/module.c +++ b/trunk/arch/mn10300/kernel/module.c @@ -48,8 +48,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - * table entries. */ } /* diff --git a/trunk/arch/mn10300/kernel/ptrace.c b/trunk/arch/mn10300/kernel/ptrace.c index d6d6cdc75c52..e143339ad28e 100644 --- a/trunk/arch/mn10300/kernel/ptrace.c +++ b/trunk/arch/mn10300/kernel/ptrace.c @@ -17,6 +17,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -64,12 +67,6 @@ static inline int get_stack_long(struct task_struct *task, int offset) ((unsigned long) task->thread.uregs + offset); } -/* - * this routine will put a word on the processes privileged stack. - * the offset is how far from the base addr as stored in the TSS. - * this routine assumes that all the privileged stacks are in our - * data space. - */ static inline int put_stack_long(struct task_struct *task, int offset, unsigned long data) { @@ -80,94 +77,233 @@ int put_stack_long(struct task_struct *task, int offset, unsigned long data) return 0; } -static inline unsigned long get_fpregs(struct fpu_state_struct *buf, - struct task_struct *tsk) +/* + * retrieve the contents of MN10300 userspace general registers + */ +static int genregs_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) { - return __copy_to_user(buf, &tsk->thread.fpu_state, - sizeof(struct fpu_state_struct)); + const struct pt_regs *regs = task_pt_regs(target); + int ret; + + /* we need to skip regs->next */ + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + regs, 0, PT_ORIG_D0 * sizeof(long)); + if (ret < 0) + return ret; + + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + ®s->orig_d0, PT_ORIG_D0 * sizeof(long), + NR_PTREGS * sizeof(long)); + if (ret < 0) + return ret; + + return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, + NR_PTREGS * sizeof(long), -1); } -static inline unsigned long set_fpregs(struct task_struct *tsk, - struct fpu_state_struct *buf) +/* + * update the contents of the MN10300 userspace general registers + */ +static int genregs_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) { - return __copy_from_user(&tsk->thread.fpu_state, buf, - sizeof(struct fpu_state_struct)); + struct pt_regs *regs = task_pt_regs(target); + unsigned long tmp; + int ret; + + /* we need to skip regs->next */ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + regs, 0, PT_ORIG_D0 * sizeof(long)); + if (ret < 0) + return ret; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + ®s->orig_d0, PT_ORIG_D0 * sizeof(long), + PT_EPSW * sizeof(long)); + if (ret < 0) + return ret; + + /* we need to mask off changes to EPSW */ + tmp = regs->epsw; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &tmp, PT_EPSW * sizeof(long), + PT_PC * sizeof(long)); + tmp &= EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | EPSW_FLAG_Z; + tmp |= regs->epsw & ~(EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | + EPSW_FLAG_Z); + regs->epsw = tmp; + + if (ret < 0) + return ret; + + /* and finally load the PC */ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + ®s->pc, PT_PC * sizeof(long), + NR_PTREGS * sizeof(long)); + + if (ret < 0) + return ret; + + return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + NR_PTREGS * sizeof(long), -1); } -static inline void fpsave_init(struct task_struct *task) +/* + * retrieve the contents of MN10300 userspace FPU registers + */ +static int fpuregs_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) { - memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct)); + const struct fpu_state_struct *fpregs = &target->thread.fpu_state; + int ret; + + unlazy_fpu(target); + + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + fpregs, 0, sizeof(*fpregs)); + if (ret < 0) + return ret; + + return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, + sizeof(*fpregs), -1); } /* - * make sure the single step bit is not set + * update the contents of the MN10300 userspace FPU registers */ -void ptrace_disable(struct task_struct *child) +static int fpuregs_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct fpu_state_struct fpu_state = target->thread.fpu_state; + int ret; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &fpu_state, 0, sizeof(fpu_state)); + if (ret < 0) + return ret; + + fpu_kill_state(target); + target->thread.fpu_state = fpu_state; + set_using_fpu(target); + + return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + sizeof(fpu_state), -1); +} + +/* + * determine if the FPU registers have actually been used + */ +static int fpuregs_active(struct task_struct *target, + const struct user_regset *regset) +{ + return is_using_fpu(target) ? regset->n : 0; +} + +/* + * Define the register sets available on the MN10300 under Linux + */ +enum mn10300_regset { + REGSET_GENERAL, + REGSET_FPU, +}; + +static const struct user_regset mn10300_regsets[] = { + /* + * General register format is: + * A3, A2, D3, D2, MCVF, MCRL, MCRH, MDRQ + * E1, E0, E7...E2, SP, LAR, LIR, MDR + * A1, A0, D1, D0, ORIG_D0, EPSW, PC + */ + [REGSET_GENERAL] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(long), + .align = sizeof(long), + .get = genregs_get, + .set = genregs_set, + }, + /* + * FPU register format is: + * FS0-31, FPCR + */ + [REGSET_FPU] = { + .core_note_type = NT_PRFPREG, + .n = sizeof(struct fpu_state_struct) / sizeof(long), + .size = sizeof(long), + .align = sizeof(long), + .get = fpuregs_get, + .set = fpuregs_set, + .active = fpuregs_active, + }, +}; + +static const struct user_regset_view user_mn10300_native_view = { + .name = "mn10300", + .e_machine = EM_MN10300, + .regsets = mn10300_regsets, + .n = ARRAY_SIZE(mn10300_regsets), +}; + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ + return &user_mn10300_native_view; +} + +/* + * set the single-step bit + */ +void user_enable_single_step(struct task_struct *child) { #ifndef CONFIG_MN10300_USING_JTAG struct user *dummy = NULL; long tmp; tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw); - tmp &= ~EPSW_T; + tmp |= EPSW_T; put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp); #endif } /* - * set the single step bit + * make sure the single-step bit is not set */ -void ptrace_enable(struct task_struct *child) +void user_disable_single_step(struct task_struct *child) { #ifndef CONFIG_MN10300_USING_JTAG struct user *dummy = NULL; long tmp; tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw); - tmp |= EPSW_T; + tmp &= ~EPSW_T; put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp); #endif } +void ptrace_disable(struct task_struct *child) +{ + user_disable_single_step(child); +} + /* * handle the arch-specific side of process tracing */ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct fpu_state_struct fpu_state; - int i, ret; + unsigned long tmp; + int ret; switch (request) { - /* read the word at location addr. */ - case PTRACE_PEEKTEXT: { - unsigned long tmp; - int copied; - - copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); - ret = -EIO; - if (copied != sizeof(tmp)) - break; - ret = put_user(tmp, (unsigned long *) data); - break; - } - - /* read the word at location addr. */ - case PTRACE_PEEKDATA: { - unsigned long tmp; - int copied; - - copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); - ret = -EIO; - if (copied != sizeof(tmp)) - break; - ret = put_user(tmp, (unsigned long *) data); - break; - } - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: { - unsigned long tmp; - + case PTRACE_PEEKUSR: ret = -EIO; if ((addr & 3) || addr < 0 || addr > sizeof(struct user) - 3) @@ -179,17 +315,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ptrace_regid_to_frame[addr]); ret = put_user(tmp, (unsigned long *) data); break; - } - - /* write the word at location addr. */ - case PTRACE_POKETEXT: - case PTRACE_POKEDATA: - if (access_process_vm(child, addr, &data, sizeof(data), 1) == - sizeof(data)) - ret = 0; - else - ret = -EIO; - break; /* write the word at location addr in the USER area */ case PTRACE_POKEUSR: @@ -204,132 +329,32 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) data); break; - /* continue and stop at next (return from) syscall */ - case PTRACE_SYSCALL: - /* restart after signal. */ - case PTRACE_CONT: - ret = -EIO; - if ((unsigned long) data > _NSIG) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - ptrace_disable(child); - wake_up_process(child); - ret = 0; - break; - - /* - * make the child exit - * - the best I can do is send it a sigkill - * - perhaps it should be put in the status that it wants to - * exit - */ - case PTRACE_KILL: - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - clear_tsk_thread_flag(child, TIF_SINGLESTEP); - ptrace_disable(child); - wake_up_process(child); - break; - - case PTRACE_SINGLESTEP: /* set the trap flag. */ -#ifndef CONFIG_MN10300_USING_JTAG - ret = -EIO; - if ((unsigned long) data > _NSIG) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - ptrace_enable(child); - child->exit_code = data; - wake_up_process(child); - ret = 0; -#else - ret = -EINVAL; -#endif - break; - - case PTRACE_DETACH: /* detach a process that was attached. */ - ret = ptrace_detach(child, data); - break; - - /* Get all gp regs from the child. */ - case PTRACE_GETREGS: { - unsigned long tmp; - - if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) { - ret = -EIO; - break; - } - - for (i = 0; i < NR_PTREGS << 2; i += 4) { - tmp = get_stack_long(child, ptrace_regid_to_frame[i]); - __put_user(tmp, (unsigned long *) data); - data += sizeof(tmp); - } - ret = 0; - break; - } - - case PTRACE_SETREGS: { /* Set all gp regs in the child. */ - unsigned long tmp; - - if (!access_ok(VERIFY_READ, (unsigned long *)data, - sizeof(struct pt_regs))) { - ret = -EIO; - break; - } - - for (i = 0; i < NR_PTREGS << 2; i += 4) { - __get_user(tmp, (unsigned long *) data); - put_stack_long(child, ptrace_regid_to_frame[i], tmp); - data += sizeof(tmp); - } - ret = 0; - break; - } - - case PTRACE_GETFPREGS: { /* Get the child FPU state. */ - if (is_using_fpu(child)) { - unlazy_fpu(child); - fpu_state = child->thread.fpu_state; - } else { - memset(&fpu_state, 0, sizeof(fpu_state)); - } - - ret = -EIO; - if (copy_to_user((void *) data, &fpu_state, - sizeof(fpu_state)) == 0) - ret = 0; - break; - } - - case PTRACE_SETFPREGS: { /* Set the child FPU state. */ - ret = -EFAULT; - if (copy_from_user(&fpu_state, (const void *) data, - sizeof(fpu_state)) == 0) { - fpu_kill_state(child); - child->thread.fpu_state = fpu_state; - set_using_fpu(child); - ret = 0; - } - break; - } - - case PTRACE_SETOPTIONS: { - if (data & PTRACE_O_TRACESYSGOOD) - child->ptrace |= PT_TRACESYSGOOD; - else - child->ptrace &= ~PT_TRACESYSGOOD; - ret = 0; - break; - } + case PTRACE_GETREGS: /* Get all integer regs from the child. */ + return copy_regset_to_user(child, &user_mn10300_native_view, + REGSET_GENERAL, + 0, NR_PTREGS * sizeof(long), + (void __user *)data); + + case PTRACE_SETREGS: /* Set all integer regs in the child. */ + return copy_regset_from_user(child, &user_mn10300_native_view, + REGSET_GENERAL, + 0, NR_PTREGS * sizeof(long), + (const void __user *)data); + + case PTRACE_GETFPREGS: /* Get the child FPU state. */ + return copy_regset_to_user(child, &user_mn10300_native_view, + REGSET_FPU, + 0, sizeof(struct fpu_state_struct), + (void __user *)data); + + case PTRACE_SETFPREGS: /* Set the child FPU state. */ + return copy_regset_from_user(child, &user_mn10300_native_view, + REGSET_FPU, + 0, sizeof(struct fpu_state_struct), + (const void __user *)data); default: - ret = -EIO; + ret = ptrace_request(child, request, addr, data); break; } @@ -337,43 +362,26 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } /* - * notification of system call entry/exit - * - triggered by current->work.syscall_trace + * handle tracing of system call entry + * - return the revised system call number or ULONG_MAX to cause ENOSYS */ -asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) +asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs) { -#if 0 - /* just in case... */ - printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n", - current->pid, - regs->orig_d0, - regs->a0, - regs->d1, - regs->a3, - regs->a2, - regs->d0); - return; -#endif - - if (!test_thread_flag(TIF_SYSCALL_TRACE) && - !test_thread_flag(TIF_SINGLESTEP)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; + if (tracehook_report_syscall_entry(regs)) + /* tracing decided this syscall should not happen, so + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in + * regs->orig_d0 + */ + return ULONG_MAX; - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | - ((current->ptrace & PT_TRACESYSGOOD) && - !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); + return regs->orig_d0; +} - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } +/* + * handle tracing of system call exit + */ +asmlinkage void syscall_trace_exit(struct pt_regs *regs) +{ + tracehook_report_syscall_exit(regs, 0); } diff --git a/trunk/arch/mn10300/kernel/signal.c b/trunk/arch/mn10300/kernel/signal.c index 841ca9955a18..9f7572a0f578 100644 --- a/trunk/arch/mn10300/kernel/signal.c +++ b/trunk/arch/mn10300/kernel/signal.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -511,6 +512,9 @@ static void do_signal(struct pt_regs *regs) * clear the TIF_RESTORE_SIGMASK flag */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return; @@ -561,4 +565,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) /* deal with pending signal delivery */ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) do_signal(regs); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(__frame); + } } diff --git a/trunk/arch/mn10300/kernel/vmlinux.lds.S b/trunk/arch/mn10300/kernel/vmlinux.lds.S index b8259668f7dc..24de6b90f401 100644 --- a/trunk/arch/mn10300/kernel/vmlinux.lds.S +++ b/trunk/arch/mn10300/kernel/vmlinux.lds.S @@ -27,10 +27,7 @@ SECTIONS _stext = .; _text = .; /* Text and read-only data */ .text : { - *( - .text.head - .text - ) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/trunk/arch/mn10300/mm/tlb-mn10300.S b/trunk/arch/mn10300/mm/tlb-mn10300.S index 789208094e98..7095147dcb8b 100644 --- a/trunk/arch/mn10300/mm/tlb-mn10300.S +++ b/trunk/arch/mn10300/mm/tlb-mn10300.S @@ -165,24 +165,6 @@ ENTRY(itlb_aerror) ENTRY(dtlb_aerror) and ~EPSW_NMID,epsw add -4,sp - mov d1,(sp) - - movhu (MMUFCR_DFC),d1 # is it the initial valid write - # to this page? - and MMUFCR_xFC_INITWR,d1 - beq dtlb_pagefault # jump if not - - mov (DPTEL),d1 # set the dirty bit - # (don't replace with BSET!) - or _PAGE_DIRTY,d1 - mov d1,(DPTEL) - mov (sp),d1 - add 4,sp - rti - - ALIGN -dtlb_pagefault: - mov (sp),d1 SAVE_ALL add -4,sp # need to pass three params diff --git a/trunk/arch/parisc/kernel/irq.c b/trunk/arch/parisc/kernel/irq.c index 4ea4229d765c..8007f1e65729 100644 --- a/trunk/arch/parisc/kernel/irq.c +++ b/trunk/arch/parisc/kernel/irq.c @@ -130,15 +130,17 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) return cpu_dest; } -static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) +static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) { int cpu_dest; cpu_dest = cpu_check_affinity(irq, dest); if (cpu_dest < 0) - return; + return -1; cpumask_copy(&irq_desc[irq].affinity, dest); + + return 0; } #endif diff --git a/trunk/arch/parisc/kernel/module.c b/trunk/arch/parisc/kernel/module.c index ecd1c5024447..ef5caf2e6ed0 100644 --- a/trunk/arch/parisc/kernel/module.c +++ b/trunk/arch/parisc/kernel/module.c @@ -267,8 +267,6 @@ void module_free(struct module *mod, void *module_region) mod->arch.section = NULL; vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } /* Additional bytes needed in front of individual sections */ diff --git a/trunk/arch/powerpc/Kconfig b/trunk/arch/powerpc/Kconfig index 4c7804551362..cdc9a6ff4be8 100644 --- a/trunk/arch/powerpc/Kconfig +++ b/trunk/arch/powerpc/Kconfig @@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool +config DTC + bool + default y + config DEFAULT_UIMAGE bool help @@ -864,6 +868,18 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" +config CONSISTENT_SIZE_BOOL + bool "Set custom consistent memory pool size" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the size of the + consistent memory pool. This pool of virtual memory + is used to make consistent memory allocations. + +config CONSISTENT_SIZE + hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL + default "0x00200000" if NOT_COHERENT_CACHE + config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx diff --git a/trunk/arch/powerpc/boot/4xx.c b/trunk/arch/powerpc/boot/4xx.c index 5c878436f348..325b310573b9 100644 --- a/trunk/arch/powerpc/boot/4xx.c +++ b/trunk/arch/powerpc/boot/4xx.c @@ -158,21 +158,33 @@ void ibm440spe_fixup_memsize(void) #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) -void ibm4xx_denali_fixup_memsize(void) +/* + * Some U-Boot versions set the number of chipselects to two + * for Sequoia/Rainier boards while they only have one chipselect + * hardwired. Hardcode the number of chipselects to one + * for sequioa/rainer board models or read the actual value + * from the memory controller register DDR0_10 otherwise. + */ +static inline u32 ibm4xx_denali_get_cs(void) { - u32 val, max_cs, max_col, max_row; - u32 cs, col, row, bank, dpath; - unsigned long memsize; + void *devp; + char model[64]; + u32 val, cs; - val = SDRAM0_READ(DDR0_02); - if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) - fatal("DDR controller is not initialized\n"); + devp = finddevice("/"); + if (!devp) + goto read_cs; - /* get maximum cs col and row values */ - max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); - max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); - max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + if (getprop(devp, "model", model, sizeof(model)) <= 0) + goto read_cs; + model[sizeof(model)-1] = 0; + + if (!strcmp(model, "amcc,sequoia") || + !strcmp(model, "amcc,rainier")) + return 1; + +read_cs: /* get CS value */ val = SDRAM0_READ(DDR0_10); @@ -183,7 +195,25 @@ void ibm4xx_denali_fixup_memsize(void) cs++; val = val >> 1; } + return cs; +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = SDRAM0_READ(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + cs = ibm4xx_denali_get_cs(); if (!cs) fatal("No memory installed\n"); if (cs > max_cs) @@ -193,9 +223,9 @@ void ibm4xx_denali_fixup_memsize(void) val = SDRAM0_READ(DDR0_14); if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) - dpath = 8; /* 64 bits */ - else dpath = 4; /* 32 bits */ + else + dpath = 8; /* 64 bits */ /* get address pins (rows) */ val = SDRAM0_READ(DDR0_42); diff --git a/trunk/arch/powerpc/boot/Makefile b/trunk/arch/powerpc/boot/Makefile index 4458abb67c51..9ae7b7e2ba71 100644 --- a/trunk/arch/powerpc/boot/Makefile +++ b/trunk/arch/powerpc/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) DTS_FLAGS ?= -p 1024 @@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ - $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ + $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ @@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + $(obj)/empty.c: @touch $@ @@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ @@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@ quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) @@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote addRamDisk hack-coff mktree dtc +hostprogs-y := addnote addRamDisk hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ @@ -133,46 +147,9 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ dtstree := $(srctree)/$(src)/dts wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE -############# -# Bits for building dtc -# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output - -dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o -dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o -dtc-objs := $(addprefix dtc-src/, $(dtc-objs)) - -# prerequisites on generated files needs to be explicit -$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h -$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h - -HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/ - -targets += dtc-src/dtc-parser.tab.c -targets += dtc-src/dtc-lexer.lex.c - -clean-files += dtc-src/dtc-parser.tab.h - -ifdef DTC_GENPARSER -BISON = bison -FLEX = flex - -quiet_cmd_bison = BISON $@ - cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped -quiet_cmd_flex = FLEX $@ - cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped - -$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE - $(call if_changed,bison) - -$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c - -$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE - $(call if_changed,flex) -endif - ############# # Bits for building various flavours of zImage @@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) # Rule to build device tree blobs -$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc - $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts +DTC = $(objtree)/scripts/dtc/dtc + +$(obj)/%.dtb: $(dtstree)/%.dts + $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) @@ -367,7 +346,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ zImage.iseries zImage.miboot zImage.pmac zImage.pseries \ - otheros.bld *.dtb + simpleImage.* otheros.bld *.dtb # clean up files cached by wrapper clean-kernel := vmlinux.strip vmlinux.bin diff --git a/trunk/arch/powerpc/boot/dts/gef_ppc9a.dts b/trunk/arch/powerpc/boot/dts/gef_ppc9a.dts index d47ad0718759..53a7a6255909 100644 --- a/trunk/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/trunk/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -161,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; + device_type = "soc"; compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; reg = <0xfef00000 0x100000>; // CCSRBAR 1M diff --git a/trunk/arch/powerpc/boot/dts/lite5200b.dts b/trunk/arch/powerpc/boot/dts/lite5200b.dts index c63e3566479e..d13cb11ce623 100644 --- a/trunk/arch/powerpc/boot/dts/lite5200b.dts +++ b/trunk/arch/powerpc/boot/dts/lite5200b.dts @@ -293,4 +293,43 @@ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xfe000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "rootfs"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "u-boot"; + reg = <0x01f00000 0x00060000>; + }; + partition@1f60000 { + label = "u-boot-env"; + reg = <0x01f60000 0x00020000>; + }; + partition@1f80000 { + label = "dtb"; + reg = <0x01f80000 0x00080000>; + }; + }; + }; + }; diff --git a/trunk/arch/powerpc/boot/mktree.c b/trunk/arch/powerpc/boot/mktree.c index 45d06a8c7cd1..c2baae0a3d89 100644 --- a/trunk/arch/powerpc/boot/mktree.c +++ b/trunk/arch/powerpc/boot/mktree.c @@ -42,7 +42,7 @@ int main(int argc, char *argv[]) { int in_fd, out_fd; int nblks, i; - uint cksum, *cp; + unsigned int cksum, *cp; struct stat st; boot_block_t bt; @@ -90,7 +90,7 @@ int main(int argc, char *argv[]) cksum = 0; cp = (void *)&bt; - for (i=0; i BSS_STACK(4*1024); diff --git a/trunk/arch/powerpc/configs/52xx/cm5200_defconfig b/trunk/arch/powerpc/configs/52xx/cm5200_defconfig index 1239c6132b4a..3838b77b8116 100644 --- a/trunk/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/trunk/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:47:44 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -232,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -275,7 +286,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -440,7 +450,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -505,10 +514,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +548,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -555,7 +568,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -657,7 +669,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -786,11 +797,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -831,7 +842,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -846,6 +856,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -853,6 +864,7 @@ CONFIG_USB_STORAGE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -863,6 +875,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -884,6 +897,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -941,6 +959,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -953,7 +972,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1024,6 +1042,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1039,11 +1058,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1061,6 +1081,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1089,9 +1112,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1099,17 +1125,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1140,10 +1168,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1211,6 +1241,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/52xx/lite5200b_defconfig b/trunk/arch/powerpc/configs/52xx/lite5200b_defconfig index b7b880562906..29b0f34488f5 100644 --- a/trunk/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/trunk/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:14 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:04 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -95,19 +97,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +122,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -128,6 +135,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -140,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,8 +168,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -170,6 +175,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set CONFIG_PPC_LITE5200=y +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -180,6 +186,8 @@ CONFIG_PPC_LITE5200=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -241,9 +249,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +283,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +306,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -412,6 +423,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -477,9 +489,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -502,6 +516,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -578,6 +593,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -611,6 +627,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -632,6 +650,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -642,10 +661,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -655,6 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -664,6 +684,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -671,7 +692,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -795,7 +815,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -876,7 +895,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -892,6 +911,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -902,6 +922,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -923,6 +944,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -966,6 +992,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -978,7 +1005,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -994,6 +1020,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1007,11 +1034,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1029,6 +1058,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1057,9 +1089,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1067,17 +1102,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1108,10 +1145,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1180,6 +1219,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/52xx/motionpro_defconfig b/trunk/arch/powerpc/configs/52xx/motionpro_defconfig index fb10f22fd0d2..07b6b266ea95 100644 --- a/trunk/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/trunk/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:29 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:22 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -233,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,7 +287,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -441,7 +451,6 @@ CONFIG_MTD_ROM=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -466,6 +475,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -516,8 +526,10 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -528,6 +540,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -556,6 +569,8 @@ CONFIG_ICPLUS_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -574,7 +589,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -665,7 +679,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -696,6 +709,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -710,11 +724,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -800,7 +817,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -810,6 +829,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -866,8 +889,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -878,6 +902,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -899,6 +924,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -956,6 +986,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -968,7 +999,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1039,6 +1069,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1054,11 +1085,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1076,6 +1108,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1104,9 +1139,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1114,17 +1152,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1155,10 +1195,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1226,6 +1268,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/52xx/pcm030_defconfig b/trunk/arch/powerpc/configs/52xx/pcm030_defconfig index 00944c09a0ae..afb1a3d1ef0a 100644 --- a/trunk/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/trunk/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:33 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:42 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +71,7 @@ CONFIG_LOCALVERSION="trunk" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -97,18 +100,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,6 +134,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -141,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -162,8 +167,6 @@ CONFIG_DEFAULT_IOSCHED="noop" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -171,6 +174,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -181,6 +185,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -242,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -290,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -340,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -352,7 +362,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -451,7 +460,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -504,6 +512,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -580,6 +589,7 @@ CONFIG_PATA_MPC52xx=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -613,6 +623,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -636,7 +648,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -702,6 +713,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -767,7 +779,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -889,11 +900,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -934,7 +945,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -949,6 +959,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1007,8 +1018,9 @@ CONFIG_RTC_DRV_PCF8563=m # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1019,6 +1031,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1039,6 +1052,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1096,6 +1114,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1107,7 +1126,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1162,6 +1180,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1177,11 +1196,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1200,13 +1219,25 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/trunk/arch/powerpc/configs/52xx/tqm5200_defconfig b/trunk/arch/powerpc/configs/52xx/tqm5200_defconfig index 65237ad6f07e..8585c7c12861 100644 --- a/trunk/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/trunk/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:57 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -138,7 +146,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,8 +166,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -168,6 +173,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -178,6 +184,8 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -238,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -281,7 +292,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -514,8 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -527,6 +538,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -555,6 +567,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -573,7 +587,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -675,7 +688,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -706,6 +718,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -720,11 +733,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -857,11 +873,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -902,7 +918,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -917,6 +932,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -976,8 +992,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -988,6 +1005,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1009,6 +1027,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1066,6 +1089,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1078,7 +1102,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1149,6 +1172,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1164,11 +1188,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1186,6 +1211,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1214,9 +1242,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1224,17 +1255,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1265,10 +1298,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1337,6 +1372,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/asp8347_defconfig b/trunk/arch/powerpc/configs/83xx/asp8347_defconfig index fc4a39a40e72..278939713775 100644 --- a/trunk/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/trunk/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:47 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:05 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_ALTIVEC is not set @@ -57,6 +58,7 @@ CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,16 +124,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_ASP834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -469,7 +483,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -499,13 +512,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -532,6 +552,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -565,6 +586,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -584,6 +607,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,11 +618,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -608,7 +633,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -759,12 +783,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -796,6 +817,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -810,11 +832,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -959,11 +984,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_LIBUSUAL is not set @@ -991,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1006,6 +1030,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1067,8 +1092,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1079,6 +1105,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1100,6 +1127,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1154,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1166,7 +1199,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1233,6 +1265,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1248,11 +1281,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1274,13 +1308,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1309,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1381,6 +1428,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 409d017621a8..c5c0fe71a438 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:48 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:06 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -481,7 +495,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -600,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -626,6 +650,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -660,6 +685,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -697,6 +724,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -707,11 +735,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -721,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -730,6 +760,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -737,7 +768,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -815,6 +845,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -827,6 +858,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -889,12 +921,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -914,7 +943,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -942,6 +970,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -957,12 +986,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -981,6 +1013,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1077,7 +1110,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1135,11 +1167,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1181,7 +1213,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1228,6 +1259,7 @@ CONFIG_USB_ETH_RNDIS=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1296,8 +1328,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1308,6 +1341,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1329,6 +1363,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1383,6 +1422,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1395,7 +1435,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1427,6 +1466,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1442,11 +1482,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1464,6 +1505,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1493,9 +1537,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1503,17 +1550,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1544,10 +1593,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1616,6 +1667,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/trunk/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 03db97c6cf33..af4952feba36 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:49 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:06 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -481,7 +495,6 @@ CONFIG_MTD_NAND_IDS=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -601,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +711,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -721,6 +746,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -758,6 +785,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -768,11 +796,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -782,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -791,6 +821,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -798,7 +829,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -876,6 +906,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -888,6 +919,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -950,12 +982,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -975,7 +1004,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -1003,6 +1031,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1018,12 +1047,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1042,6 +1074,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1138,7 +1171,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1196,11 +1228,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1242,7 +1274,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1289,6 +1320,7 @@ CONFIG_USB_ETH_RNDIS=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1357,8 +1389,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1369,6 +1402,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1390,6 +1424,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1444,6 +1483,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1456,7 +1496,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1488,6 +1527,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1503,11 +1543,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1525,6 +1566,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1554,9 +1598,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1564,17 +1611,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1605,10 +1654,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1677,6 +1728,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/trunk/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index fb17de53cc02..8c8f660b4fc7 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:50 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:07 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC832x_MDS=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -411,13 +425,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -475,9 +496,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -515,6 +539,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -548,6 +573,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -567,6 +594,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -577,14 +605,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -594,6 +623,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -603,6 +633,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -610,7 +641,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -692,6 +722,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -753,12 +784,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -790,6 +818,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -804,11 +833,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -906,7 +938,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -920,7 +951,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -988,8 +1019,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1000,6 +1032,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1021,6 +1054,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1064,6 +1102,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1076,7 +1115,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1106,6 +1144,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1119,11 +1158,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1145,13 +1186,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1180,10 +1232,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1252,6 +1306,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/trunk/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index a012ce235203..227dbba76795 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:52 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:08 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC832x_RDB=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -413,13 +427,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -477,9 +499,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -501,6 +525,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -517,6 +542,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -551,6 +577,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -570,6 +598,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -580,14 +609,15 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -597,6 +627,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -606,6 +637,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -613,7 +645,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -691,6 +722,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -704,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -768,12 +801,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -792,7 +822,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -820,6 +849,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -835,12 +865,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -859,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -955,7 +989,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1012,11 +1045,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1058,7 +1091,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1074,6 +1106,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1101,6 +1134,7 @@ CONFIG_MMC_SPI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1111,6 +1145,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1132,6 +1167,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1178,6 +1218,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1190,7 +1231,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1264,6 +1304,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1277,11 +1318,13 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1303,13 +1346,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1338,10 +1392,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1410,6 +1466,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/trunk/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 4bcc4a1ff308..24ee7fcac87e 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:53 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:09 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -608,9 +629,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -633,6 +656,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -720,6 +744,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -755,6 +780,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -765,11 +791,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -779,6 +806,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -788,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -795,7 +824,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -853,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -865,6 +894,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -927,12 +957,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -951,7 +978,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -1083,11 +1109,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1128,7 +1154,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1144,6 +1169,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1212,8 +1238,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1224,6 +1251,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1245,6 +1273,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1292,6 +1325,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1304,7 +1338,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1375,6 +1408,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1388,11 +1422,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1414,13 +1450,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1449,10 +1496,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,6 +1570,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/trunk/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 9ba5518ce8df..7f39543205a9 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:55 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:10 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -560,9 +581,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -584,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -635,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -645,11 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -659,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -668,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -675,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -733,6 +761,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -745,6 +774,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -807,12 +837,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -831,7 +858,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -963,11 +989,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1008,7 +1034,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1023,6 +1048,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1091,8 +1117,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1103,6 +1130,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1124,6 +1152,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1171,6 +1204,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1183,7 +1217,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1254,6 +1287,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1267,11 +1301,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1293,13 +1329,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1328,10 +1375,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1400,6 +1449,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/trunk/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 18e4bc0b3c11..1cd1fcac22c8 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:56 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:11 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_MDS=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -443,6 +464,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -476,6 +498,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -513,6 +537,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -523,11 +548,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -537,6 +563,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -546,6 +573,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -553,7 +581,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -694,12 +721,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -731,6 +755,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -745,11 +770,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -847,7 +875,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -861,7 +888,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -929,8 +956,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -941,6 +969,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -962,6 +991,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1005,6 +1039,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1017,7 +1052,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1045,6 +1079,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1058,11 +1093,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1084,13 +1121,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1119,10 +1167,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1191,6 +1241,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/trunk/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 76db8138eac7..ce5177393a0d 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:58 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:12 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,6 +191,8 @@ CONFIG_MPC836x_MDS=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -271,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -293,7 +308,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -349,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -361,7 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -464,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -493,13 +506,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -557,9 +577,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -581,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -597,6 +620,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -630,6 +654,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -649,6 +675,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -659,14 +686,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -676,6 +704,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -685,6 +714,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -692,7 +722,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -774,6 +803,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -835,12 +865,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -872,6 +899,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -886,11 +914,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1019,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1032,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1070,8 +1100,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1082,6 +1113,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1103,6 +1135,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1147,6 +1184,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1159,7 +1197,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1189,6 +1226,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1202,11 +1240,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1228,13 +1268,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1263,10 +1314,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1335,6 +1388,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/trunk/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 0dc11c44306b..7f1d1383a249 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:01 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:13 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -57,6 +58,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,16 +124,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC836x_RDK=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -475,7 +489,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -506,13 +519,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -539,6 +560,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -574,6 +596,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -584,14 +607,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -601,7 +625,6 @@ CONFIG_UCC_GETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -673,6 +696,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -686,6 +710,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -749,12 +774,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -774,7 +796,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -924,6 +945,7 @@ CONFIG_FB_OF=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -956,7 +978,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -967,6 +988,7 @@ CONFIG_HID_COMPAT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -977,6 +999,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -998,6 +1021,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1052,6 +1080,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1064,7 +1093,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1095,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_UCC_SLOW=y CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1110,11 +1139,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1136,13 +1166,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1182,10 +1223,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1254,6 +1297,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/trunk/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index e42f6b3917d2..bf636fd560ad 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:59 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:12 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_MPC837x_MDS=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -474,9 +495,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -575,6 +599,7 @@ CONFIG_ATA_SFF=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -608,6 +633,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -637,11 +665,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -651,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -660,6 +690,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -667,7 +698,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -811,12 +841,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +875,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -862,11 +890,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -964,7 +995,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,7 +1008,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -994,6 +1024,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1004,6 +1035,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1025,6 +1057,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1068,6 +1105,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1080,7 +1118,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1112,6 +1149,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1125,11 +1163,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1149,13 +1189,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1184,10 +1235,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1256,6 +1309,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/trunk/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 408022f79a50..fe6454eacbdb 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:01 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:14 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_MPC837x_RDB=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -357,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -406,13 +420,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -469,9 +490,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -494,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -563,7 +587,7 @@ CONFIG_MD_AUTODETECT=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -581,6 +605,7 @@ CONFIG_MD_RAID5_RESHAPE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -614,6 +639,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -633,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -643,11 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -657,7 +686,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -811,12 +839,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +873,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -862,11 +888,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -976,15 +1005,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1050,11 +1081,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1084,7 +1115,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1099,6 +1129,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1108,6 +1139,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1118,6 +1150,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1139,6 +1172,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1182,6 +1220,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1194,7 +1233,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1226,6 +1264,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1239,11 +1278,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1263,13 +1304,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1302,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1374,6 +1428,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/83xx/sbc834x_defconfig b/trunk/arch/powerpc/configs/83xx/sbc834x_defconfig index a0c42fb65cb9..fe08f672cb27 100644 --- a/trunk/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/trunk/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:02 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:15 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,16 +122,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,18 +162,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,6 +191,8 @@ CONFIG_SBC834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -242,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -270,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -292,7 +307,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -348,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -360,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -408,13 +422,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -441,6 +462,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -474,6 +496,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -493,6 +517,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -503,11 +528,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -517,7 +543,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -660,12 +685,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -697,6 +719,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -711,11 +734,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -813,7 +839,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -824,6 +849,7 @@ CONFIG_HID_COMPAT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -848,6 +874,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -891,6 +922,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -903,7 +935,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -919,6 +950,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -932,11 +964,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -956,13 +990,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -991,10 +1036,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1063,6 +1110,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/ksi8560_defconfig b/trunk/arch/powerpc/configs/85xx/ksi8560_defconfig index 6479bb9f3f57..09146ddaa3ca 100644 --- a/trunk/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/trunk/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:03 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:16 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -86,21 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -120,6 +136,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -127,7 +144,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,11 +159,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -163,6 +174,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -444,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -467,9 +481,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -502,6 +520,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,6 +550,8 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -544,6 +565,7 @@ CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_FCC=y CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -552,7 +574,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -624,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -663,6 +685,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set @@ -726,7 +749,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -739,7 +761,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -753,6 +775,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -763,6 +786,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -785,6 +809,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -829,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -838,7 +868,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -866,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -879,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -901,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -931,9 +966,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -941,17 +979,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1045,6 +1086,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/trunk/arch/powerpc/configs/85xx/mpc8536_ds_defconfig deleted file mode 100644 index e31b6a4732ed..000000000000 --- a/trunk/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:04 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -CONFIG_MPC8536_DS=y -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=524288 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set -CONFIG_SATA_SIL24=y -CONFIG_SATA_FSL=y -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=y -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKY2=y -# CONFIG_SKY2_DEBUG is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_VIRQ_DEBUG is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/trunk/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 905e8a3388d6..7b43be7586b6 100644 --- a/trunk/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/trunk/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:05 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:17 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,16 +126,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -129,7 +146,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,11 +161,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -165,6 +176,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -233,9 +245,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,17 +281,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -387,9 +402,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -404,6 +423,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -432,6 +452,8 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -441,6 +463,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -449,7 +472,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -607,7 +629,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -620,7 +641,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -634,6 +655,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -644,6 +666,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -665,6 +688,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -708,6 +736,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -717,7 +746,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -745,6 +773,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -758,11 +787,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -780,6 +811,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -809,9 +843,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -819,17 +856,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -922,6 +961,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/trunk/arch/powerpc/configs/85xx/mpc8544_ds_defconfig deleted file mode 100644 index f6fa0b761cb3..000000000000 --- a/trunk/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:07 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set -CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_PATA_ALI=y -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/trunk/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 095e2ded6e8b..62adb71a5d4f 100644 --- a/trunk/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/trunk/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:09 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:17 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +128,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -125,6 +141,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,11 +164,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -168,6 +179,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -236,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +279,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -277,17 +293,17 @@ CONFIG_PCI_DEBUG=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -343,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -405,12 +421,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -437,6 +457,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -470,6 +491,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -493,6 +516,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -503,10 +527,12 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -516,6 +542,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -525,6 +552,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -532,7 +560,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -608,6 +635,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -651,6 +679,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -719,7 +748,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -733,7 +761,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -749,6 +777,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -759,6 +788,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -780,6 +810,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -823,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -832,7 +868,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -860,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -873,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -895,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -924,9 +965,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -934,17 +978,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1037,6 +1083,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/trunk/arch/powerpc/configs/85xx/mpc8568mds_defconfig deleted file mode 100644 index 186c1010a135..000000000000 --- a/trunk/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:10 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -CONFIG_MPC85xx_MDS=y -# CONFIG_MPC8536_DS is not set -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_BOOKE_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set -# CONFIG_HID_PID is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -CONFIG_RTC_DRV_DS1374=y -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -CONFIG_PPC_EARLY_DEBUG=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set -# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set -# CONFIG_PPC_EARLY_DEBUG_BEAT is not set -# CONFIG_PPC_EARLY_DEBUG_44x is not set -# CONFIG_PPC_EARLY_DEBUG_40x is not set -# CONFIG_PPC_EARLY_DEBUG_CPM is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y -# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/trunk/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index f95961c04a20..41209e3a6545 100644 --- a/trunk/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/trunk/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:13 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:18 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,16 +127,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -234,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,17 +291,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -341,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -353,7 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -402,18 +418,23 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -488,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -521,6 +543,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -540,6 +564,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -550,10 +575,12 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -563,6 +590,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -572,6 +600,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -579,7 +608,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -750,7 +778,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -764,7 +791,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -780,6 +807,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -790,6 +818,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -811,6 +840,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -854,6 +888,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -863,7 +898,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -891,6 +925,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -904,11 +939,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -926,6 +963,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -955,9 +995,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -965,17 +1008,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1068,6 +1113,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/sbc8548_defconfig b/trunk/arch/powerpc/configs/85xx/sbc8548_defconfig index e68e80987aa9..6c36c9c7abfd 100644 --- a/trunk/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/trunk/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:15 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:19 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -271,17 +287,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +366,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -396,12 +412,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -428,6 +448,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -461,6 +482,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -480,6 +503,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -490,10 +514,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -503,6 +529,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -512,6 +539,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -519,7 +547,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -692,6 +719,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -716,6 +744,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -759,6 +792,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -768,7 +802,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -784,6 +817,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,11 +831,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -821,13 +857,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -918,6 +965,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/sbc8560_defconfig b/trunk/arch/powerpc/configs/85xx/sbc8560_defconfig index b1c766ef7e2e..4aaf1a6bdc7d 100644 --- a/trunk/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/trunk/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:17 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:20 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -385,9 +400,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -402,6 +421,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,8 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -439,6 +461,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -447,7 +470,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -603,7 +625,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -616,7 +637,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -665,8 +686,9 @@ CONFIG_RTC_DRV_M48T59=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -691,6 +713,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -734,6 +761,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -743,7 +771,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -771,6 +798,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -784,11 +812,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -806,6 +836,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -834,9 +867,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -844,17 +880,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -958,6 +996,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/socrates_defconfig b/trunk/arch/powerpc/configs/85xx/socrates_defconfig index 0cc9048290a8..79984589db69 100644 --- a/trunk/arch/powerpc/configs/85xx/socrates_defconfig +++ b/trunk/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26.2 -# Sat Oct 18 11:06:13 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:21 2009 # # CONFIG_PPC64 is not set @@ -15,15 +15,19 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -33,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -43,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -54,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,54 +77,70 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -126,12 +148,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -145,13 +165,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -160,12 +178,14 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -181,14 +201,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -202,6 +224,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -216,17 +240,24 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -238,6 +269,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -245,6 +277,8 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -256,15 +290,12 @@ CONFIG_PCI_LEGACY=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -315,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -324,7 +356,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -339,27 +373,17 @@ CONFIG_CAN_BCM=y # CAN Device Drivers # # CONFIG_CAN_VCAN is not set -# CONFIG_CAN_OLD_DRIVERS is not set -# CONFIG_CAN_SLCAN is not set -CONFIG_CAN_SJA1000=y -CONFIG_CAN_SJA1000_MEM_OF=y -# CONFIG_CAN_EMS_PCI is not set -# CONFIG_CAN_IXXAT_PCI is not set -# CONFIG_CAN_PEAK_PCI is not set -# CONFIG_CAN_KVASER_PCI is not set -# CONFIG_CAN_MSCAN is not set # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -378,6 +402,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -458,15 +483,22 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set CONFIG_MTD_NAND_SOCRATES=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -486,12 +518,24 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -533,6 +577,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -549,7 +595,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -572,6 +618,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -581,22 +630,28 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -607,10 +662,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -619,7 +677,10 @@ CONFIG_GFAR_NAPI=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -668,17 +729,23 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -CONFIG_TOUCHSCREEN_TSC2003=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -691,6 +758,7 @@ CONFIG_TOUCHSCREEN_TSC2003=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -715,16 +783,20 @@ CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -734,44 +806,62 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -785,33 +875,38 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set -CONFIG_SPI_SOCRATES=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -827,10 +922,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -849,22 +949,31 @@ CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -893,6 +1002,7 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -914,10 +1024,6 @@ CONFIG_FB_BOTH_ENDIAN=y # # Frame buffer hardware drivers # -CONFIG_FB_MB862XX=y -# CONFIG_FB_MB862XX_PCI_GDC is not set -CONFIG_FB_MB862XX_LIME=y -# CONFIG_FB_PRE_INIT_FB is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -936,6 +1042,7 @@ CONFIG_FB_MB862XX_LIME=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -944,9 +1051,16 @@ CONFIG_FB_MB862XX_LIME=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_FSL_DIU is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +CONFIG_FB_MB862XX=y +# CONFIG_FB_MB862XX_PCI_GDC is not set +CONFIG_FB_MB862XX_LIME=y +# CONFIG_FB_PRE_INIT_FB is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -974,10 +1088,6 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -988,9 +1098,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1008,6 +1145,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1018,6 +1158,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1031,6 +1172,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1038,20 +1181,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1067,7 +1210,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1080,7 +1222,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1088,7 +1230,6 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1098,7 +1239,14 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1135,33 +1283,42 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set -CONFIG_RTC_DRV_RX8025=y +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -CONFIG_RTC_DRV_PPC=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1170,17 +1327,20 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1189,6 +1349,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1208,15 +1373,13 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1236,25 +1399,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1286,25 +1451,28 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1321,7 +1489,32 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1330,13 +1523,16 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1374,6 +1570,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1403,8 +1603,15 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/85xx/stx_gp3_defconfig b/trunk/arch/powerpc/configs/85xx/stx_gp3_defconfig index eb4ba7a5f41f..bd1bfcddbd0c 100644 --- a/trunk/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/trunk/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:18 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:22 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +128,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,6 +142,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -137,7 +154,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,11 +169,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -173,6 +184,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set @@ -241,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,17 +298,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +369,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -389,6 +406,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set @@ -406,6 +424,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -418,7 +437,6 @@ CONFIG_NET_PKTGEN=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -476,13 +494,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -591,9 +616,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -617,6 +644,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -633,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -666,6 +695,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -687,6 +718,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -697,10 +729,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -710,6 +744,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -719,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -726,7 +762,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -778,7 +813,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -837,6 +871,7 @@ CONFIG_PRINTER=m # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -903,12 +938,9 @@ CONFIG_I2C_ALGOBIT=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -964,6 +996,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -978,11 +1011,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1075,7 +1112,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1089,7 +1125,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1116,6 +1152,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1137,6 +1174,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1186,6 +1228,7 @@ CONFIG_CRAMFS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1197,7 +1240,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1253,6 +1295,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1266,12 +1309,13 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1289,6 +1333,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1319,9 +1366,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1329,17 +1379,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1433,6 +1485,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/tqm8540_defconfig b/trunk/arch/powerpc/configs/85xx/tqm8540_defconfig index f4379b1cf841..767600145fb2 100644 --- a/trunk/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/trunk/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:19 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,19 +100,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y @@ -232,9 +244,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -259,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -270,17 +286,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -348,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -448,7 +464,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -477,19 +492,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -564,6 +587,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -597,6 +621,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -634,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -644,10 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -657,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -666,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -673,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -754,6 +784,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -816,12 +847,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -853,6 +881,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -867,11 +896,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -955,7 +987,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -969,7 +1000,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -985,6 +1016,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -995,6 +1027,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1016,6 +1049,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1070,6 +1108,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1079,7 +1118,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1107,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1122,11 +1161,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1148,13 +1188,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1245,6 +1296,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/tqm8541_defconfig b/trunk/arch/powerpc/configs/85xx/tqm8541_defconfig index b8669231c1fe..52fafc006dd0 100644 --- a/trunk/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/trunk/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:20 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/tqm8548_defconfig b/trunk/arch/powerpc/configs/85xx/tqm8548_defconfig index 43030fea2eee..8b4faae7a9a1 100644 --- a/trunk/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/trunk/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Mon Mar 16 09:03:28 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:24 2009 # # CONFIG_PPC64 is not set @@ -59,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -99,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -123,10 +127,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -134,6 +140,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -146,7 +153,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +183,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -246,6 +253,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -278,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -302,7 +312,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -358,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -370,7 +380,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -514,6 +523,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -548,6 +558,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -581,6 +592,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -600,6 +613,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -610,6 +624,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -624,6 +639,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -633,6 +649,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -640,7 +657,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -785,7 +801,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -817,6 +832,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -831,11 +847,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -919,7 +938,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -982,8 +1000,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1008,6 +1027,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1062,6 +1086,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1071,7 +1096,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1099,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1114,11 +1139,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1136,6 +1162,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1166,10 +1195,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1177,17 +1208,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1281,6 +1314,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/tqm8555_defconfig b/trunk/arch/powerpc/configs/85xx/tqm8555_defconfig index d5a864d74461..170360934cec 100644 --- a/trunk/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/trunk/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:21 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:25 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/85xx/tqm8560_defconfig b/trunk/arch/powerpc/configs/85xx/tqm8560_defconfig index a25009174f37..f41cc2444d48 100644 --- a/trunk/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/trunk/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:22 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:26 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/trunk/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index df2c16337794..b6a23af57f46 100644 --- a/trunk/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/trunk/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Fri Mar 13 15:36:11 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:31 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -100,21 +103,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -123,10 +129,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -135,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -148,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -169,8 +177,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -189,6 +195,7 @@ CONFIG_GEF_PPC9A=y # CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -250,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -281,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -303,7 +314,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -383,9 +393,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -398,6 +410,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -456,11 +469,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -495,6 +508,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -545,7 +559,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -686,6 +699,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -751,9 +765,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -776,6 +792,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -852,6 +869,7 @@ CONFIG_SATA_SIL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -885,6 +903,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -904,6 +924,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -914,8 +935,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -929,7 +950,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1056,6 +1076,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1122,7 +1143,6 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1178,6 +1198,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1192,11 +1213,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1315,15 +1340,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1393,11 +1420,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1439,7 +1466,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1456,6 +1482,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1517,8 +1544,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1531,6 +1559,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1552,6 +1581,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1609,6 +1643,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1621,7 +1656,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1682,6 +1716,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1697,11 +1732,12 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1719,6 +1755,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1747,9 +1786,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1758,17 +1800,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1790,6 +1834,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1805,10 +1850,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1878,6 +1925,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/trunk/arch/powerpc/configs/86xx/gef_sbc310_defconfig index bd236b3d915a..a66910e63345 100644 --- a/trunk/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/trunk/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Wed Jan 28 23:05:34 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:29 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -96,20 +99,23 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +124,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +138,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -143,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -165,8 +173,6 @@ CONFIG_PPC_MSI_BITMAP=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,9 +187,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set CONFIG_GEF_SBC310=y # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -245,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -275,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,7 +300,6 @@ CONFIG_PCI_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 @@ -298,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -382,6 +392,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -394,7 +405,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set @@ -493,7 +503,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -529,6 +538,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -594,9 +604,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -619,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -641,6 +654,7 @@ CONFIG_SATA_SIL24=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -674,6 +688,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -693,6 +709,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -703,11 +720,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -717,7 +735,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -828,6 +845,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -894,7 +912,6 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -949,6 +966,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -963,11 +981,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1086,15 +1108,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1164,11 +1188,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1210,7 +1234,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1226,6 +1249,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1287,8 +1311,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1301,6 +1326,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1322,6 +1348,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1382,6 +1413,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1394,7 +1426,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1455,6 +1486,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1470,11 +1502,12 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1494,13 +1527,25 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1530,10 +1575,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1602,6 +1649,7 @@ CONFIG_CRYPTO_DES=y # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/trunk/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 1ab5abae00a2..c6a7fc82b69a 100644 --- a/trunk/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/trunk/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:26 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:30 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,10 +74,20 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,21 +103,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +129,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -139,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,8 +191,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set CONFIG_GEF_SBC610=y CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -244,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -275,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -298,7 +315,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -378,9 +394,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -393,6 +411,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -451,11 +470,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -490,6 +509,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -540,7 +560,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -651,7 +670,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -682,13 +700,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -746,9 +771,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -771,6 +798,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -847,6 +875,7 @@ CONFIG_SATA_SIL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -880,6 +909,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -899,6 +930,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -909,11 +941,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -923,7 +956,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1050,6 +1082,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1113,12 +1146,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1174,6 +1204,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1188,11 +1219,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1311,15 +1346,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1389,11 +1426,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1435,7 +1472,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1452,6 +1488,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1513,8 +1550,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1527,6 +1565,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1548,6 +1587,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1595,6 +1639,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1607,7 +1652,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1668,6 +1712,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1681,13 +1726,14 @@ CONFIG_CRC_CCITT=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1705,6 +1751,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1733,9 +1782,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1744,17 +1796,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1776,6 +1830,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1791,10 +1846,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1864,6 +1921,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/trunk/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index bbdf4bfc4327..cfd2efcc6bce 100644 --- a/trunk/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/trunk/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:24 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:28 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -87,21 +98,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,10 +125,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,18 +166,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -176,9 +185,13 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8610=y # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -238,9 +251,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -291,7 +308,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -364,6 +380,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -376,7 +393,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -492,7 +508,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -521,13 +536,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -632,9 +654,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -657,6 +681,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -733,6 +758,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -747,6 +773,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set @@ -774,7 +802,6 @@ CONFIG_ULI526X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -929,12 +956,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1049,6 +1073,7 @@ CONFIG_FB_FSL_DIU=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1069,6 +1094,7 @@ CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y @@ -1116,6 +1142,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1165,7 +1193,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1179,7 +1206,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1247,8 +1274,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1259,6 +1287,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1279,6 +1308,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1323,6 +1357,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1337,7 +1372,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1409,6 +1443,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1422,11 +1457,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1444,6 +1481,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1474,9 +1514,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1484,17 +1527,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1589,6 +1634,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/trunk/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 92acfdf3540a..0bee3e303942 100644 --- a/trunk/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/trunk/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:25 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:28 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,11 +72,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -90,22 +102,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +129,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -127,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -140,7 +157,6 @@ CONFIG_MODVERSIONS=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,8 +191,11 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -245,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +289,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -297,7 +313,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -385,6 +400,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -397,7 +413,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -451,13 +466,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -516,9 +538,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -541,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -617,6 +642,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -650,6 +676,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -669,6 +697,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -679,11 +708,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -693,6 +723,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -702,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -709,7 +741,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -875,12 +906,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -933,7 +961,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -942,6 +970,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -981,103 +1010,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1157,6 +1090,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1211,15 +1146,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1292,11 +1229,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1338,7 +1275,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1354,6 +1290,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1415,8 +1352,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1427,6 +1365,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1449,6 +1388,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1504,6 +1448,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1519,7 +1464,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1590,6 +1534,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1604,11 +1549,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1626,6 +1572,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1656,9 +1605,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1666,17 +1618,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1707,10 +1661,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1779,6 +1735,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/86xx/sbc8641d_defconfig b/trunk/arch/powerpc/configs/86xx/sbc8641d_defconfig index 04797e730c5a..c30a0c715873 100644 --- a/trunk/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/trunk/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:23 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:27 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,10 +73,20 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -90,21 +102,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,10 +128,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -125,6 +142,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -138,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,18 +171,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -180,8 +190,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set CONFIG_SBC8641D=y # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -243,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +290,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -296,7 +313,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -376,9 +392,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -391,6 +409,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -449,11 +468,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -488,6 +507,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -538,7 +558,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -649,7 +668,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -678,13 +696,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -729,6 +754,7 @@ CONFIG_DM_ZERO=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -762,6 +788,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -781,6 +809,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -791,11 +820,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -805,7 +835,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -923,6 +952,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -985,12 +1015,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1022,6 +1049,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1036,11 +1064,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1145,7 +1176,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1159,7 +1189,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1175,6 +1205,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1187,6 +1218,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1227,6 +1259,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1269,8 +1306,13 @@ CONFIG_MINIX_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1283,7 +1325,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1346,6 +1387,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1359,13 +1401,14 @@ CONFIG_CRC_CCITT=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1383,6 +1426,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1411,9 +1457,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1422,17 +1471,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1454,6 +1506,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1469,10 +1522,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1542,6 +1597,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/adder875_defconfig b/trunk/arch/powerpc/configs/adder875_defconfig index aaab5cc3751c..74f7f7c6fdc4 100644 --- a/trunk/arch/powerpc/configs/adder875_defconfig +++ b/trunk/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:24 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:50 2009 # # CONFIG_PPC64 is not set @@ -53,6 +53,7 @@ CONFIG_GENERIC_BUG=y CONFIG_REDBOOT=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,19 +95,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -106,10 +116,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,13 +129,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -139,11 +151,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,6 +498,8 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -558,7 +566,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -606,6 +613,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -675,6 +683,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -698,6 +707,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -742,6 +756,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -753,7 +768,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -785,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -802,6 +817,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -819,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -845,9 +864,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -855,17 +877,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/trunk/arch/powerpc/configs/c2k_defconfig b/trunk/arch/powerpc/configs/c2k_defconfig index 5103319a7f56..9ffa8de92803 100644 --- a/trunk/arch/powerpc/configs/c2k_defconfig +++ b/trunk/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:26 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:51 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,12 +72,22 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -92,23 +104,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,6 +134,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -133,6 +150,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -145,7 +163,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,18 +178,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -192,6 +202,8 @@ CONFIG_EMBEDDED6xx=y # CONFIG_PPC_PRPMC2800 is not set CONFIG_PPC_C2K=y CONFIG_MV64X60=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -268,9 +280,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -295,6 +310,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set @@ -315,15 +331,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -364,7 +376,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_LRO=m +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -403,9 +415,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -419,6 +433,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -508,11 +523,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set CONFIG_BRIDGE_NF_EBTABLES=m @@ -544,6 +559,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set CONFIG_ATM=m CONFIG_ATM_CLIP=m @@ -566,6 +582,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -612,6 +629,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -638,7 +656,6 @@ CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -748,7 +765,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -846,9 +862,11 @@ CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=m +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -875,6 +893,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -891,6 +910,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -924,6 +944,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -943,6 +965,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -957,6 +980,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -966,7 +990,6 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1084,6 +1107,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=m CONFIG_GEN_RTC=m # CONFIG_GEN_RTC_X is not set @@ -1150,12 +1174,9 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -CONFIG_SENSORS_PCF8591=m # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1187,6 +1208,7 @@ CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set CONFIG_SENSORS_GL518SM=m # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_IT87=m @@ -1201,11 +1223,14 @@ CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set CONFIG_SENSORS_MAX1619=m # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +CONFIG_SENSORS_PCF8591=m # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_SMSC47M1=m @@ -1363,21 +1388,21 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m # CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set @@ -1402,7 +1427,7 @@ CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1438,12 +1463,14 @@ CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m @@ -1466,7 +1493,6 @@ CONFIG_USB_LCD=m CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1487,6 +1513,7 @@ CONFIG_USB_SPEEDTOUCH=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1516,6 +1543,7 @@ CONFIG_DMADEVICES=y # # DMA Devices # +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1524,6 +1552,7 @@ CONFIG_DMADEVICES=y # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -1553,6 +1582,11 @@ CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1612,6 +1646,7 @@ CONFIG_VXFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1626,7 +1661,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1637,6 +1671,7 @@ CONFIG_CIFS=m CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1704,6 +1739,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1719,12 +1755,15 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1742,6 +1781,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1775,12 +1817,15 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1788,18 +1833,21 @@ CONFIG_TRACING=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1830,6 +1878,7 @@ CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1845,10 +1894,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1918,6 +1969,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/ep8248e_defconfig b/trunk/arch/powerpc/configs/ep8248e_defconfig index add6419c15d9..04915c3a43f6 100644 --- a/trunk/arch/powerpc/configs/ep8248e_defconfig +++ b/trunk/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:27 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:52 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -104,10 +114,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -115,6 +127,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -122,7 +135,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -137,18 +149,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -167,6 +172,8 @@ CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -222,9 +229,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -250,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,7 +283,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +363,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -364,7 +375,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -468,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -517,6 +526,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -550,6 +560,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -572,6 +584,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -581,8 +594,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -594,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -603,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -610,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -662,6 +676,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -751,8 +766,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -763,6 +780,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -780,6 +798,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -894,6 +916,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -907,11 +930,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -927,6 +950,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -955,9 +979,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -965,16 +992,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1005,9 +1034,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1071,6 +1102,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/ep88xc_defconfig b/trunk/arch/powerpc/configs/ep88xc_defconfig index b2fdfd9e183c..c2a439595f4d 100644 --- a/trunk/arch/powerpc/configs/ep88xc_defconfig +++ b/trunk/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:28 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:53 2009 # # CONFIG_PPC64 is not set @@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,6 +498,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -562,6 +570,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -631,6 +640,7 @@ CONFIG_DAB=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -654,6 +664,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -698,6 +713,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -709,7 +725,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -758,6 +774,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -775,6 +792,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -801,9 +821,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -811,17 +834,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/trunk/arch/powerpc/configs/linkstation_defconfig b/trunk/arch/powerpc/configs/linkstation_defconfig index 15900dcf0bfa..a4053ab9e244 100644 --- a/trunk/arch/powerpc/configs/linkstation_defconfig +++ b/trunk/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:07:38 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:54 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +70,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -100,21 +103,24 @@ CONFIG_NAMESPACES=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -124,10 +130,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -135,6 +143,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -168,8 +176,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -191,6 +197,8 @@ CONFIG_LINKSTATION=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -250,9 +258,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -277,6 +288,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -299,7 +311,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -371,6 +382,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -379,6 +391,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set @@ -389,6 +402,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -465,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -477,7 +492,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -625,6 +639,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -690,9 +705,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -715,6 +732,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -791,6 +809,7 @@ CONFIG_PATA_SIL680=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -805,6 +824,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y @@ -833,6 +854,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -843,8 +865,8 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -858,6 +880,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -867,6 +890,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -874,7 +898,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -985,6 +1008,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1050,7 +1074,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,6 +1105,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1096,11 +1120,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1195,7 +1222,6 @@ CONFIG_HID=m # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1250,11 +1276,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1290,7 +1316,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y @@ -1314,11 +1340,13 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set @@ -1341,7 +1369,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1357,6 +1384,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1418,8 +1446,9 @@ CONFIG_RTC_DRV_RS5C372=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1430,6 +1459,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1455,6 +1485,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1507,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1524,7 +1560,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1584,6 +1619,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1597,15 +1633,18 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1623,6 +1662,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1652,9 +1694,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1662,17 +1707,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1703,10 +1750,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1776,6 +1825,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mgcoge_defconfig b/trunk/arch/powerpc/configs/mgcoge_defconfig index c58c38d5b7a6..31e1df665157 100644 --- a/trunk/arch/powerpc/configs/mgcoge_defconfig +++ b/trunk/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:30 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:55 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -57,6 +58,7 @@ CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -83,23 +94,25 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,10 +121,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,6 +134,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -126,7 +142,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -141,18 +156,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y CONFIG_PPC_CHRP=y # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -171,7 +179,9 @@ CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -231,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,7 +296,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +369,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -464,7 +477,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -517,6 +529,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -551,6 +564,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -576,7 +591,6 @@ CONFIG_FS_ENET_HAS_SCC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -631,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -720,8 +735,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -732,6 +749,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -750,6 +768,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -872,6 +894,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -887,11 +910,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -907,6 +931,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -935,9 +960,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -945,16 +973,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -986,9 +1017,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mgsuvd_defconfig b/trunk/arch/powerpc/configs/mgsuvd_defconfig index 297b5d5042be..24fa90792c54 100644 --- a/trunk/arch/powerpc/configs/mgsuvd_defconfig +++ b/trunk/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:32 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:55 2009 # # CONFIG_PPC64 is not set @@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -82,20 +92,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -103,10 +116,12 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -114,6 +129,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -121,7 +137,6 @@ CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -137,11 +152,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -232,9 +242,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -268,14 +281,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -483,6 +492,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -511,6 +521,8 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -531,7 +543,6 @@ CONFIG_FS_ENET_HAS_SCC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -582,6 +593,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -651,6 +663,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -663,6 +676,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -685,6 +699,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -739,6 +758,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -750,7 +770,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -782,6 +801,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,11 +817,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -819,13 +840,25 @@ CONFIG_DEBUG_FS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -917,6 +950,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mpc5200_defconfig b/trunk/arch/powerpc/configs/mpc5200_defconfig index af0cd55605d0..aaa4416660e9 100644 --- a/trunk/arch/powerpc/configs/mpc5200_defconfig +++ b/trunk/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Fri Feb 6 09:48:53 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon Apr 20 11:06:25 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -39,6 +40,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -55,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -91,19 +94,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,10 +119,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -124,6 +132,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -136,7 +145,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,8 +165,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -166,8 +172,9 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_EFIKA=y CONFIG_PPC_LITE5200=y +CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y -# CONFIG_PPC_MPC5200_GPIO is not set +CONFIG_PPC_MPC5200_GPIO=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -176,7 +183,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -241,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +307,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -388,12 +400,9 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -447,6 +456,8 @@ CONFIG_MTD_PHYSMAP_OF=y # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -465,14 +476,23 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -500,12 +520,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y @@ -564,9 +586,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -589,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -666,6 +691,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -699,6 +725,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -722,7 +751,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -802,6 +830,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -854,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -883,22 +913,63 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MPC52xx_PSC=m + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -915,10 +986,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -929,11 +1002,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -952,6 +1030,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -989,6 +1068,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -1084,9 +1164,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y @@ -1127,15 +1211,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y # CONFIG_HID_APPLE is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -1204,11 +1290,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1250,7 +1336,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1265,6 +1350,8 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1317,6 +1404,13 @@ CONFIG_RTC_DRV_DS1307=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1336,8 +1430,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1348,6 +1443,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1369,6 +1465,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1416,6 +1517,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1426,6 +1533,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1438,7 +1546,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1493,6 +1600,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1500,7 +1608,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1508,11 +1616,14 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1530,6 +1641,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1558,9 +1672,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1568,17 +1685,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1609,10 +1728,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1680,8 +1801,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=m # # Random Number Generation diff --git a/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig b/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig index 38712e861c46..642ab67c8431 100644 --- a/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:33 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:56 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,20 +96,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,16 +122,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -125,7 +142,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -141,18 +157,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -172,6 +181,8 @@ CONFIG_MPC7448HPC2=y # CONFIG_PPC_PRPMC2800 is not set # CONFIG_PPC_C2K is not set CONFIG_TSI108_BRIDGE=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y CONFIG_MPIC_WEIRD=y @@ -230,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +269,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -277,7 +292,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -345,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -392,12 +406,16 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -454,9 +472,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -479,6 +499,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -554,6 +575,7 @@ CONFIG_SATA_MV=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -587,6 +609,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -628,6 +652,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -639,10 +664,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_TSI108_ETH=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -652,6 +677,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -661,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -668,7 +695,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -839,7 +865,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -853,7 +878,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -869,6 +894,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -879,6 +905,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -901,6 +928,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -944,6 +976,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -953,7 +986,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -985,6 +1017,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -998,11 +1031,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1024,13 +1059,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1122,6 +1168,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mpc8272_ads_defconfig b/trunk/arch/powerpc/configs/mpc8272_ads_defconfig index d85a43cb821f..cb966ca2ce89 100644 --- a/trunk/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:35 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:57 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,6 +128,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -123,7 +136,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -138,18 +150,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -169,6 +174,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -225,9 +232,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -253,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,7 +286,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -356,6 +366,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -367,7 +378,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -472,7 +482,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -521,6 +530,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -554,6 +564,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -576,6 +588,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -585,8 +598,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -598,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -607,6 +621,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -614,7 +629,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -668,7 +682,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -719,6 +732,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -809,8 +823,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -821,6 +837,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -841,6 +858,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -956,6 +977,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -971,11 +993,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -993,6 +1015,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1022,9 +1047,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1032,16 +1060,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1072,9 +1102,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1138,6 +1170,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mpc83xx_defconfig b/trunk/arch/powerpc/configs/mpc83xx_defconfig index 45f03cad8db6..433c303eb82b 100644 --- a/trunk/arch/powerpc/configs/mpc83xx_defconfig +++ b/trunk/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:36 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:58 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -58,6 +59,7 @@ CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,10 +125,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,18 +166,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -189,6 +198,8 @@ CONFIG_PPC_MPC834x=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -251,9 +262,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -281,6 +295,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -303,7 +318,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -359,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -371,7 +386,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -485,7 +499,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -516,13 +529,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -580,9 +600,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -605,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -681,6 +704,7 @@ CONFIG_ATA_SFF=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -714,6 +738,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -733,6 +759,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -743,14 +770,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -760,6 +788,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -769,6 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -776,7 +806,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -867,6 +896,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -932,12 +962,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -992,6 +1019,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1006,11 +1034,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1121,15 +1153,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1181,6 +1215,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set @@ -1195,11 +1230,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1229,7 +1264,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1245,6 +1279,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1254,6 +1289,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1264,6 +1300,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1285,6 +1322,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1329,6 +1371,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1341,7 +1384,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1375,6 +1417,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1388,11 +1431,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1412,13 +1457,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1448,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1520,6 +1578,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mpc85xx_defconfig b/trunk/arch/powerpc/configs/mpc85xx_defconfig index fb08819d7cc4..c162724fed4f 100644 --- a/trunk/arch/powerpc/configs/mpc85xx_defconfig +++ b/trunk/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:37 2009 +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:40:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,11 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -93,22 +105,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +132,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +146,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -142,7 +159,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,11 +174,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -178,8 +189,9 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_STX_GP3 is not set +CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y CONFIG_TQM8548=y @@ -200,11 +212,11 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set +CONFIG_QE_GPIO=y CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y -# CONFIG_MPC8xxx_GPIO is not set +CONFIG_MPC8xxx_GPIO=y # CONFIG_SIMPLE_GPIO is not set # @@ -249,9 +261,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -278,6 +293,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -291,17 +307,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -389,6 +405,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -401,7 +418,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -456,13 +472,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -521,9 +544,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -546,6 +571,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -622,6 +648,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -634,11 +661,11 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set +CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set @@ -647,7 +674,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -655,6 +682,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -667,7 +696,10 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_ATL2 is not set -# CONFIG_FS_ENET is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -675,6 +707,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -685,11 +718,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -699,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -708,6 +746,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -715,7 +754,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -813,14 +851,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set +CONFIG_SERIAL_QE=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -857,7 +896,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_CPM is not set +CONFIG_I2C_CPM=m # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -885,12 +924,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -969,7 +1005,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -978,6 +1014,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -1017,103 +1054,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1193,6 +1134,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1247,15 +1190,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1314,6 +1259,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set @@ -1329,11 +1275,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1375,7 +1321,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1392,6 +1337,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1406,6 +1352,8 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1460,7 +1408,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set CONFIG_DMADEVICES=y # @@ -1473,7 +1421,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1484,6 +1434,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1507,6 +1458,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1562,6 +1518,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1577,7 +1534,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1648,6 +1604,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1662,11 +1622,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1684,6 +1645,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1714,9 +1678,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1724,17 +1691,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1759,18 +1729,21 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1837,6 +1810,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1845,7 +1819,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_CRYPTO_DEV_TALITOS=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/trunk/arch/powerpc/configs/mpc85xx_smp_defconfig similarity index 91% rename from trunk/arch/powerpc/configs/85xx/mpc8572_ds_defconfig rename to trunk/arch/powerpc/configs/mpc85xx_smp_defconfig index 813223ae174d..1aa1c508d600 100644 --- a/trunk/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/trunk/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:12 2009 +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:41:18 2009 # # CONFIG_PPC64 is not set @@ -22,9 +22,10 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_NR_CPUS=8 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -44,6 +45,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -59,6 +61,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,11 +76,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -93,22 +106,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +133,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +147,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -143,7 +162,6 @@ CONFIG_MODVERSIONS=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,11 +177,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -173,21 +186,23 @@ CONFIG_CLASSIC_RCU=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set +CONFIG_MPC8540_ADS=y +CONFIG_MPC8560_ADS=y +CONFIG_MPC85xx_CDS=y +CONFIG_MPC85xx_MDS=y +CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set +CONFIG_SOCRATES=y +CONFIG_KSI8560=y +CONFIG_STX_GP3=y +CONFIG_TQM8540=y +CONFIG_TQM8541=y +CONFIG_TQM8548=y +CONFIG_TQM8555=y +CONFIG_TQM8560=y +CONFIG_SBC8548=y # CONFIG_SBC8560 is not set +CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -199,10 +214,12 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set +CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y +CONFIG_CPM2=y CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set +CONFIG_CPM=y +CONFIG_MPC8xxx_GPIO=y # CONFIG_SIMPLE_GPIO is not set # @@ -248,9 +265,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -277,6 +297,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -290,17 +311,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -388,6 +409,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -400,7 +422,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -431,6 +452,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -454,13 +476,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -519,9 +548,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -544,12 +575,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set +CONFIG_SATA_FSL=y CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -620,6 +652,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -632,11 +665,11 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set +CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set @@ -645,7 +678,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -653,6 +686,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -665,6 +700,10 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_ATL2 is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -672,6 +711,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -682,10 +722,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -695,6 +740,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -704,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -711,7 +758,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -806,8 +852,10 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_QE=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -815,6 +863,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -851,6 +900,8 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +CONFIG_I2C_CPM=m +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -877,12 +928,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -891,7 +939,31 @@ CONFIG_EEPROM_LEGACY=y # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -911,6 +983,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -935,7 +1009,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -944,6 +1018,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -983,103 +1058,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1159,6 +1138,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1213,15 +1194,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1264,9 +1247,9 @@ CONFIG_USB_MON=y # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -1280,10 +1263,12 @@ CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1294,11 +1279,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1340,7 +1325,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1356,13 +1340,24 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1417,8 +1412,22 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1429,11 +1438,13 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1451,6 +1462,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1506,6 +1522,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1521,7 +1538,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1592,6 +1608,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1606,11 +1626,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1621,13 +1642,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1658,9 +1682,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1668,22 +1695,26 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set +CONFIG_VIRQ_DEBUG=y # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1709,10 +1740,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1781,6 +1814,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1790,5 +1824,6 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/mpc866_ads_defconfig b/trunk/arch/powerpc/configs/mpc866_ads_defconfig index 1793d08e9c01..3add6f62b21e 100644 --- a/trunk/arch/powerpc/configs/mpc866_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:38 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:00 2009 # # CONFIG_PPC64 is not set @@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -83,18 +93,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -103,10 +113,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -114,6 +126,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -121,7 +134,6 @@ CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -137,11 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -232,9 +239,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -268,14 +278,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -379,9 +386,13 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -396,6 +407,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -424,6 +436,8 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -437,6 +451,7 @@ CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y CONFIG_NETDEV_1000=y +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set CONFIG_NETDEV_10000=y @@ -445,7 +460,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -492,7 +506,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -540,6 +553,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -622,7 +636,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -635,7 +648,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -649,6 +662,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -661,6 +675,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -682,6 +697,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -725,6 +745,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -736,7 +757,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -768,6 +788,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -782,11 +803,11 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -806,13 +827,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -903,6 +935,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mpc86xx_defconfig b/trunk/arch/powerpc/configs/mpc86xx_defconfig index adc756e1f252..5bb1b8eb0b49 100644 --- a/trunk/arch/powerpc/configs/mpc86xx_defconfig +++ b/trunk/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:39 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:00 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,11 +73,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,22 +103,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -116,10 +130,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -128,6 +144,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -141,7 +158,6 @@ CONFIG_MODVERSIONS=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,18 +173,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,9 +192,12 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y CONFIG_SBC8641D=y CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set CONFIG_GEF_SBC610=y CONFIG_MPC8641=y CONFIG_MPC8610=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -247,9 +259,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -299,7 +315,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -387,6 +402,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -399,7 +415,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -454,13 +469,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -519,9 +541,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -544,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -620,6 +645,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -653,6 +679,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -672,6 +700,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -682,11 +711,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -696,6 +726,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -705,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -712,7 +744,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -879,12 +910,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -963,7 +991,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -972,6 +1000,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -1011,103 +1040,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1187,6 +1120,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1241,15 +1176,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1322,11 +1259,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1368,7 +1305,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1385,6 +1321,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1446,8 +1383,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1458,6 +1396,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1480,6 +1419,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1535,6 +1479,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1550,7 +1495,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1621,6 +1565,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1635,11 +1580,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1657,6 +1603,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1687,9 +1636,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1697,17 +1649,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1738,10 +1692,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1810,6 +1766,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/mpc885_ads_defconfig b/trunk/arch/powerpc/configs/mpc885_ads_defconfig index 4b76321c0ec4..42e64ebc279d 100644 --- a/trunk/arch/powerpc/configs/mpc885_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:41 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:01 2009 # # CONFIG_PPC64 is not set @@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -240,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -277,14 +287,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -335,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -347,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -450,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -474,6 +480,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +509,8 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -522,7 +531,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -573,6 +581,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -642,6 +651,7 @@ CONFIG_DAB=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -665,6 +675,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -709,6 +724,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -720,7 +736,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -752,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -769,6 +785,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -786,6 +803,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -812,9 +832,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -822,17 +845,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/trunk/arch/powerpc/configs/pmac32_defconfig b/trunk/arch/powerpc/configs/pmac32_defconfig index 5339bb44cce9..ea8870a34482 100644 --- a/trunk/arch/powerpc/configs/pmac32_defconfig +++ b/trunk/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Tue Nov 11 19:36:51 2008 +# Linux kernel version: 2.6.30-rc7 +# Mon May 25 14:53:25 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -52,12 +53,14 @@ CONFIG_OF=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,14 +75,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -88,23 +101,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +131,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -127,10 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -138,11 +157,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_LSF=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,14 +174,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -178,7 +191,9 @@ CONFIG_PPC_PMAC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -212,11 +227,12 @@ CONFIG_CPU_FREQ_PMAC=y CONFIG_PPC601_SYNC_FIX=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -239,6 +255,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -250,12 +267,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -288,6 +310,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m @@ -397,6 +421,8 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -405,6 +431,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -415,6 +442,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -478,17 +506,15 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m +CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +CONFIG_IP_DCCP_TFRC_LIB=y # # DCCP Kernel Hacking @@ -508,13 +534,16 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set CONFIG_IRDA=m @@ -577,8 +606,6 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIUART is not set CONFIG_BT_HCIBCM203X=m @@ -590,31 +617,27 @@ CONFIG_BT_HCIBFUSB=m # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_NL80211=y +# CONFIG_CFG80211_REG_DEBUG is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -662,17 +685,27 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set @@ -684,7 +717,6 @@ CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -714,6 +746,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -728,7 +761,6 @@ CONFIG_BLK_DEV_SL82C105=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA=y # @@ -772,6 +804,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -791,8 +824,12 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -822,6 +859,7 @@ CONFIG_SCSI_MAC53C94=y # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -881,6 +919,7 @@ CONFIG_THERM_ADT746X=m # CONFIG_ANSLCD is not set CONFIG_PMAC_RACKMETER=m CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -898,6 +937,8 @@ CONFIG_BMAC=y CONFIG_SUNGEM=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -913,7 +954,6 @@ CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -923,6 +963,7 @@ CONFIG_PCNET32=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -935,6 +976,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -945,18 +987,20 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -966,6 +1010,7 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -974,20 +1019,11 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set -CONFIG_HERMES=m -CONFIG_APPLE_AIRPORT=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -# CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set CONFIG_PRISM54=m @@ -997,15 +1033,17 @@ CONFIG_PRISM54=m # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set CONFIG_P54_COMMON=m # CONFIG_P54_USB is not set # CONFIG_P54_PCI is not set +CONFIG_P54_LEDS=y # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_AR9170_USB is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set CONFIG_B43=m CONFIG_B43_PCI_AUTOSELECT=y @@ -1025,6 +1063,19 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_PIO_MODE is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_APPLE_AIRPORT=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +CONFIG_PCI_HERMES=m +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -1036,6 +1087,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -1099,7 +1151,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set +CONFIG_MOUSE_APPLETOUCH=y # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set @@ -1150,10 +1202,13 @@ CONFIG_SERIAL_PMACZILOG_TTYS=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -1232,12 +1287,9 @@ CONFIG_I2C_POWERMAC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1259,11 +1311,11 @@ CONFIG_BATTERY_PMU=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y @@ -1281,18 +1333,13 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1390,6 +1437,7 @@ CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=y # CONFIG_FB_3DFX_ACCEL is not set +CONFIG_FB_3DFX_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set @@ -1399,12 +1447,14 @@ CONFIG_FB_3DFX=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1444,11 +1494,13 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m # CONFIG_SND_VIRMIDI is not set @@ -1486,6 +1538,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1551,28 +1605,31 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1603,6 +1660,7 @@ CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1625,24 +1683,23 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set -CONFIG_USB_STORAGE_ONETOUCH=y +CONFIG_USB_STORAGE_ONETOUCH=m # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1665,7 +1722,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -1701,15 +1758,19 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1726,7 +1787,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set CONFIG_USB_APPLEDISPLAY=m @@ -1738,6 +1798,11 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1748,7 +1813,9 @@ CONFIG_LEDS_CLASS=y # LED drivers # # CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1759,11 +1826,16 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1774,6 +1846,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1783,7 +1856,9 @@ CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1792,6 +1867,7 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1800,6 +1876,11 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1831,10 +1912,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=m @@ -1843,6 +1921,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1851,6 +1930,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1868,7 +1948,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1940,11 +2019,13 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1954,15 +2035,18 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1973,13 +2057,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1994,6 +2081,7 @@ CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set @@ -2001,6 +2089,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -2009,7 +2098,14 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -2017,12 +2113,19 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_CODE_PATCHING_SELFTEST is not set @@ -2033,6 +2136,7 @@ CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -2051,13 +2155,20 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -2127,6 +2238,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/pq2fads_defconfig b/trunk/arch/powerpc/configs/pq2fads_defconfig index fdded96633a1..129d80860f2a 100644 --- a/trunk/arch/powerpc/configs/pq2fads_defconfig +++ b/trunk/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:42 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:02 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -81,22 +92,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -106,10 +119,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,6 +132,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,7 +140,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -139,18 +154,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -169,6 +177,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -225,9 +235,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -254,6 +267,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -276,7 +290,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -357,6 +370,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -368,7 +382,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -473,7 +486,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -498,10 +510,14 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -573,6 +589,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -606,6 +623,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -628,6 +647,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -637,8 +657,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -650,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -659,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -666,7 +688,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -720,7 +741,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -773,6 +793,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -868,7 +889,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set @@ -907,13 +928,16 @@ CONFIG_USB_ETH_RNDIS=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -924,6 +948,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -944,6 +969,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -1059,6 +1088,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1074,11 +1104,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1096,6 +1127,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1125,9 +1159,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1135,16 +1172,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1175,9 +1214,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1241,6 +1282,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/prpmc2800_defconfig b/trunk/arch/powerpc/configs/prpmc2800_defconfig index e971db171138..e9f287f313fa 100644 --- a/trunk/arch/powerpc/configs/prpmc2800_defconfig +++ b/trunk/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:44 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:03 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,9 +72,19 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,22 +101,26 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,16 +130,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +150,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +165,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -178,6 +189,8 @@ CONFIG_EMBEDDED6xx=y CONFIG_PPC_PRPMC2800=y # CONFIG_PPC_C2K is not set CONFIG_MV64X60=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -237,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -279,15 +296,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,7 +331,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +369,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -459,7 +472,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -489,19 +501,27 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -605,9 +625,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -630,6 +652,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -707,6 +730,7 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -740,6 +764,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -781,6 +807,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -795,6 +822,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -804,6 +832,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -813,6 +842,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -820,7 +850,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -975,12 +1004,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1012,6 +1038,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1026,11 +1053,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1127,15 +1157,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1202,11 +1234,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1236,7 +1268,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1252,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1313,8 +1345,9 @@ CONFIG_RTC_DRV_MAX6900=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1325,6 +1358,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1347,6 +1381,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1391,6 +1430,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1400,7 +1440,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1432,6 +1471,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1445,11 +1485,15 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1471,13 +1515,24 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1569,6 +1624,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/trunk/arch/powerpc/configs/ps3_defconfig b/trunk/arch/powerpc/configs/ps3_defconfig index ac14f5245d2a..e28e65e7a0e1 100644 --- a/trunk/arch/powerpc/configs/ps3_defconfig +++ b/trunk/arch/powerpc/configs/ps3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc8 -# Fri Mar 13 09:28:45 2009 +# Linux kernel version: 2.6.30-rc5 +# Fri May 15 10:37:00 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y CONFIG_POWER4=y @@ -55,9 +56,11 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +75,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_PMAC is not set @@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y # CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y # CONFIG_PQ2ADS is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -316,7 +326,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set @@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set @@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_UEVENT is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set -# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_AR9170_USB is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set @@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_JOYSTICK=y -# CONFIG_JOYSTICK_ANALOG is not set -# CONFIG_JOYSTICK_A3D is not set -# CONFIG_JOYSTICK_ADI is not set -# CONFIG_JOYSTICK_COBRA is not set -# CONFIG_JOYSTICK_GF2K is not set -# CONFIG_JOYSTICK_GRIP is not set -# CONFIG_JOYSTICK_GRIP_MP is not set -# CONFIG_JOYSTICK_GUILLEMOT is not set -# CONFIG_JOYSTICK_INTERACT is not set -# CONFIG_JOYSTICK_SIDEWINDER is not set -# CONFIG_JOYSTICK_TMDC is not set -# CONFIG_JOYSTICK_IFORCE is not set -# CONFIG_JOYSTICK_WARRIOR is not set -# CONFIG_JOYSTICK_MAGELLAN is not set -# CONFIG_JOYSTICK_SPACEORB is not set -# CONFIG_JOYSTICK_SPACEBALL is not set -# CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDJOY is not set -# CONFIG_JOYSTICK_ZHENHUA is not set -# CONFIG_JOYSTICK_JOYDUMP is not set -# CONFIG_JOYSTICK_XPAD is not set +# CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9 # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -# CONFIG_HID_COMPAT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set +CONFIG_HID_SONY=m # CONFIG_HID_SUNPLUS is not set # CONFIG_GREENASIA_FF is not set # CONFIG_HID_TOPSEED is not set @@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y # # on-CPU RTC drivers # -CONFIG_RTC_DRV_PPC=m +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_RTC_DRV_PS3=m # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1160,6 +1160,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1371,18 +1384,21 @@ CONFIG_TRACING=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # diff --git a/trunk/arch/powerpc/configs/storcenter_defconfig b/trunk/arch/powerpc/configs/storcenter_defconfig index 94903465ea12..bd4a8d435c50 100644 --- a/trunk/arch/powerpc/configs/storcenter_defconfig +++ b/trunk/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:09:08 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:04 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -95,17 +97,17 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,16 +117,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -137,7 +142,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,8 +162,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,6 +183,8 @@ CONFIG_STORCENTER=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -239,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -266,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,7 +296,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +359,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -486,6 +493,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -500,6 +508,7 @@ CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -604,9 +613,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -628,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -637,7 +649,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -655,6 +667,7 @@ CONFIG_MD_RAID5_RESHAPE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -671,6 +684,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -681,8 +695,8 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -696,7 +710,6 @@ CONFIG_R8169=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -766,6 +779,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -831,7 +845,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -952,11 +965,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -997,7 +1010,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1013,6 +1025,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1074,8 +1087,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1086,6 +1100,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1112,6 +1127,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1166,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_EXPORTFS=m @@ -1231,6 +1252,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1246,11 +1268,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1272,13 +1294,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/trunk/arch/powerpc/include/asm/dma-mapping.h b/trunk/arch/powerpc/include/asm/dma-mapping.h index c69f2b5f0cc4..cb448d68452c 100644 --- a/trunk/arch/powerpc/include/asm/dma-mapping.h +++ b/trunk/arch/powerpc/include/asm/dma-mapping.h @@ -26,7 +26,9 @@ * allocate the space "normally" and use the cache management functions * to ensure it is consistent. */ -extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); +struct device; +extern void *__dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp); extern void __dma_free_coherent(size_t size, void *vaddr); extern void __dma_sync(void *vaddr, size_t size, int direction); extern void __dma_sync_page(struct page *page, unsigned long offset, @@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, * Cache coherent cores. */ -#define __dma_alloc_coherent(gfp, size, handle) NULL +#define __dma_alloc_coherent(dev, gfp, size, handle) NULL #define __dma_free_coherent(size, addr) ((void)0) #define __dma_sync(addr, size, rw) ((void)0) #define __dma_sync_page(pg, off, sz, rw) ((void)0) diff --git a/trunk/arch/powerpc/include/asm/elf.h b/trunk/arch/powerpc/include/asm/elf.h index 1a856b15226e..d6b4a12cdeff 100644 --- a/trunk/arch/powerpc/include/asm/elf.h +++ b/trunk/arch/powerpc/include/asm/elf.h @@ -258,7 +258,9 @@ do { \ # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ (exec_stk != EXSTACK_DISABLE_X) : 0) #else -# define SET_PERSONALITY(ex) set_personality(PER_LINUX) +# define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) +# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X) #endif /* __powerpc64__ */ extern int dcache_bsize; diff --git a/trunk/arch/powerpc/include/asm/fixmap.h b/trunk/arch/powerpc/include/asm/fixmap.h index d60fd18f428c..f1f4e23a84e9 100644 --- a/trunk/arch/powerpc/include/asm/fixmap.h +++ b/trunk/arch/powerpc/include/asm/fixmap.h @@ -14,8 +14,6 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -extern unsigned long FIXADDR_TOP; - #ifndef __ASSEMBLY__ #include #include @@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP; #include #endif +#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) + /* * Here we define all the compile-time 'special' virtual * addresses. The point is to have a constant address at diff --git a/trunk/arch/powerpc/include/asm/hw_irq.h b/trunk/arch/powerpc/include/asm/hw_irq.h index b7e034b0a6dd..53512374e1c9 100644 --- a/trunk/arch/powerpc/include/asm/hw_irq.h +++ b/trunk/arch/powerpc/include/asm/hw_irq.h @@ -131,5 +131,41 @@ static inline int irqs_disabled_flags(unsigned long flags) */ struct irq_chip; +#ifdef CONFIG_PERF_COUNTERS +static inline unsigned long test_perf_counter_pending(void) +{ + unsigned long x; + + asm volatile("lbz %0,%1(13)" + : "=r" (x) + : "i" (offsetof(struct paca_struct, perf_counter_pending))); + return x; +} + +static inline void set_perf_counter_pending(void) +{ + asm volatile("stb %0,%1(13)" : : + "r" (1), + "i" (offsetof(struct paca_struct, perf_counter_pending))); +} + +static inline void clear_perf_counter_pending(void) +{ + asm volatile("stb %0,%1(13)" : : + "r" (0), + "i" (offsetof(struct paca_struct, perf_counter_pending))); +} + +#else + +static inline unsigned long test_perf_counter_pending(void) +{ + return 0; +} + +static inline void set_perf_counter_pending(void) {} +static inline void clear_perf_counter_pending(void) {} +#endif /* CONFIG_PERF_COUNTERS */ + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/trunk/arch/powerpc/include/asm/iseries/iommu.h b/trunk/arch/powerpc/include/asm/iseries/iommu.h index c59ee7e4bed1..1b9692c60899 100644 --- a/trunk/arch/powerpc/include/asm/iseries/iommu.h +++ b/trunk/arch/powerpc/include/asm/iseries/iommu.h @@ -26,10 +26,6 @@ struct vio_dev; struct device_node; struct iommu_table; -/* Creates table for an individual device node */ -extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, - struct device_node *dn); - /* Get table parameters from HV */ extern void iommu_table_getparms_iSeries(unsigned long busno, unsigned char slotno, unsigned char virtbus, diff --git a/trunk/arch/powerpc/include/asm/mmu.h b/trunk/arch/powerpc/include/asm/mmu.h index 86d2366ab6a1..cbf154387091 100644 --- a/trunk/arch/powerpc/include/asm/mmu.h +++ b/trunk/arch/powerpc/include/asm/mmu.h @@ -52,12 +52,6 @@ */ #define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) -/* This indicates that the processor uses the wrong opcode for tlbilx - * instructions. During the ISA 2.06 development the opcode for tlbilx - * changed and some early implementations used to old opcode - */ -#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000) - #ifndef __ASSEMBLY__ #include diff --git a/trunk/arch/powerpc/include/asm/of_platform.h b/trunk/arch/powerpc/include/asm/of_platform.h index 53b46507ffde..d4aaa3489440 100644 --- a/trunk/arch/powerpc/include/asm/of_platform.h +++ b/trunk/arch/powerpc/include/asm/of_platform.h @@ -11,16 +11,6 @@ * */ -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/trunk/arch/powerpc/include/asm/paca.h b/trunk/arch/powerpc/include/asm/paca.h index 082b3aedf145..6ef055723019 100644 --- a/trunk/arch/powerpc/include/asm/paca.h +++ b/trunk/arch/powerpc/include/asm/paca.h @@ -99,6 +99,7 @@ struct paca_struct { u8 soft_enabled; /* irq soft-enable flag */ u8 hard_enabled; /* set if irqs are enabled in MSR */ u8 io_sync; /* writel() needs spin_unlock sync */ + u8 perf_counter_pending; /* PM interrupt while soft-disabled */ /* Stuff for accurate time accounting */ u64 user_time; /* accumulated usermode TB ticks */ diff --git a/trunk/arch/powerpc/include/asm/perf_counter.h b/trunk/arch/powerpc/include/asm/perf_counter.h new file mode 100644 index 000000000000..cc7c887705b8 --- /dev/null +++ b/trunk/arch/powerpc/include/asm/perf_counter.h @@ -0,0 +1,98 @@ +/* + * Performance counter support - PowerPC-specific definitions. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include + +#define MAX_HWCOUNTERS 8 +#define MAX_EVENT_ALTERNATIVES 8 +#define MAX_LIMITED_HWCOUNTERS 2 + +/* + * This struct provides the constants and functions needed to + * describe the PMU on a particular POWER-family CPU. + */ +struct power_pmu { + int n_counter; + int max_alternatives; + u64 add_fields; + u64 test_adder; + int (*compute_mmcr)(u64 events[], int n_ev, + unsigned int hwc[], u64 mmcr[]); + int (*get_constraint)(u64 event, u64 *mskp, u64 *valp); + int (*get_alternatives)(u64 event, unsigned int flags, + u64 alt[]); + void (*disable_pmc)(unsigned int pmc, u64 mmcr[]); + int (*limited_pmc_event)(u64 event); + u32 flags; + int n_generic; + int *generic_events; + int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; +}; + +extern struct power_pmu *ppmu; + +/* + * Values for power_pmu.flags + */ +#define PPMU_LIMITED_PMC5_6 1 /* PMC5/6 have limited function */ +#define PPMU_ALT_SIPR 2 /* uses alternate posn for SIPR/HV */ + +/* + * Values for flags to get_alternatives() + */ +#define PPMU_LIMITED_PMC_OK 1 /* can put this on a limited PMC */ +#define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ +#define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ + +struct pt_regs; +extern unsigned long perf_misc_flags(struct pt_regs *regs); +#define perf_misc_flags(regs) perf_misc_flags(regs) + +extern unsigned long perf_instruction_pointer(struct pt_regs *regs); + +/* + * The power_pmu.get_constraint function returns a 64-bit value and + * a 64-bit mask that express the constraints between this event and + * other events. + * + * The value and mask are divided up into (non-overlapping) bitfields + * of three different types: + * + * Select field: this expresses the constraint that some set of bits + * in MMCR* needs to be set to a specific value for this event. For a + * select field, the mask contains 1s in every bit of the field, and + * the value contains a unique value for each possible setting of the + * MMCR* bits. The constraint checking code will ensure that two events + * that set the same field in their masks have the same value in their + * value dwords. + * + * Add field: this expresses the constraint that there can be at most + * N events in a particular class. A field of k bits can be used for + * N <= 2^(k-1) - 1. The mask has the most significant bit of the field + * set (and the other bits 0), and the value has only the least significant + * bit of the field set. In addition, the 'add_fields' and 'test_adder' + * in the struct power_pmu for this processor come into play. The + * add_fields value contains 1 in the LSB of the field, and the + * test_adder contains 2^(k-1) - 1 - N in the field. + * + * NAND field: this expresses the constraint that you may not have events + * in all of a set of classes. (For example, on PPC970, you can't select + * events from the FPU, ISU and IDU simultaneously, although any two are + * possible.) For N classes, the field is N+1 bits wide, and each class + * is assigned one bit from the least-significant N bits. The mask has + * only the most-significant bit set, and the value has only the bit + * for the event's class set. The test_adder has the least significant + * bit set in the field. + * + * If an event is not subject to the constraint expressed by a particular + * field, then it will have 0 in both the mask and value for that field. + */ diff --git a/trunk/arch/powerpc/include/asm/pgtable-ppc32.h b/trunk/arch/powerpc/include/asm/pgtable-ppc32.h index ba45c997830f..c9ff9d75990e 100644 --- a/trunk/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/trunk/arch/powerpc/include/asm/pgtable-ppc32.h @@ -10,7 +10,7 @@ extern unsigned long va_to_phys(unsigned long address); extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; +extern unsigned long ioremap_bot; #ifdef CONFIG_44x extern int icache_44x_need_flush; @@ -55,9 +55,31 @@ extern int icache_44x_need_flush; #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +/* + * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary + * value (for now) on others, from where we can start layout kernel + * virtual space that goes below PKMAP and FIXMAP + */ +#ifdef CONFIG_HIGHMEM +#define KVIRT_TOP PKMAP_BASE +#else +#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */ +#endif + +/* + * ioremap_bot starts at that address. Early ioremaps move down from there, + * until mem_init() at which point this becomes the top of the vmalloc + * and ioremap space + */ +#ifdef CONFIG_NOT_COHERENT_CACHE +#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK) +#else +#define IOREMAP_TOP KVIRT_TOP +#endif + /* * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the + * current 16MB value just means that there will be a 64MB "hole" after the * physical memory until the kernel virtual memory starts. That means that * any out-of-bounds memory accesses will hopefully be caught. * The vmalloc() routines leaves a hole of 4kB between each vmalloced diff --git a/trunk/arch/powerpc/include/asm/ppc-opcode.h b/trunk/arch/powerpc/include/asm/ppc-opcode.h index ef4da37f3c10..640ccbbc0977 100644 --- a/trunk/arch/powerpc/include/asm/ppc-opcode.h +++ b/trunk/arch/powerpc/include/asm/ppc-opcode.h @@ -44,7 +44,6 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a #define PPC_INST_TLBILX 0x7c000024 -#define PPC_INST_TLBILX_EARLY 0x7c000626 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ @@ -64,18 +63,10 @@ #define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI) #define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI) #define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) + __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b)) #define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) #define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) #define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) - -#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) -#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b) -#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b) -#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b) #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) diff --git a/trunk/arch/powerpc/include/asm/ppc_asm.h b/trunk/arch/powerpc/include/asm/ppc_asm.h index f59a66684aed..384d90c9c272 100644 --- a/trunk/arch/powerpc/include/asm/ppc_asm.h +++ b/trunk/arch/powerpc/include/asm/ppc_asm.h @@ -4,6 +4,7 @@ #ifndef _ASM_POWERPC_PPC_ASM_H #define _ASM_POWERPC_PPC_ASM_H +#include #include #include #include @@ -189,7 +190,7 @@ name: \ GLUE(.,name): #define _INIT_GLOBAL(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .globl name; \ .globl GLUE(.,name); \ @@ -229,7 +230,7 @@ name: \ GLUE(.,name): #define _INIT_STATIC(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .section ".opd","aw"; \ name: \ diff --git a/trunk/arch/powerpc/include/asm/reg.h b/trunk/arch/powerpc/include/asm/reg.h index e8018d540e87..fb359b0a6937 100644 --- a/trunk/arch/powerpc/include/asm/reg.h +++ b/trunk/arch/powerpc/include/asm/reg.h @@ -492,11 +492,13 @@ #define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */ #define SPRN_MMCR1 798 #define SPRN_MMCRA 0x312 +#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */ #define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */ #define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */ #define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */ #define MMCRA_SLOT_SHIFT 24 #define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */ +#define POWER6_MMCRA_SDSYNC 0x0000080000000000ULL /* SDAR/SIAR synced */ #define POWER6_MMCRA_SIHV 0x0000040000000000ULL #define POWER6_MMCRA_SIPR 0x0000020000000000ULL #define POWER6_MMCRA_THRM 0x00000020UL diff --git a/trunk/arch/powerpc/include/asm/systbl.h b/trunk/arch/powerpc/include/asm/systbl.h index d98a30dfd41c..a0b92de51c7e 100644 --- a/trunk/arch/powerpc/include/asm/systbl.h +++ b/trunk/arch/powerpc/include/asm/systbl.h @@ -322,6 +322,6 @@ SYSCALL_SPU(epoll_create1) SYSCALL_SPU(dup3) SYSCALL_SPU(pipe2) SYSCALL(inotify_init1) -SYSCALL(ni_syscall) +SYSCALL_SPU(perf_counter_open) COMPAT_SYS_SPU(preadv) COMPAT_SYS_SPU(pwritev) diff --git a/trunk/arch/powerpc/include/asm/system.h b/trunk/arch/powerpc/include/asm/system.h index f612798e1c93..2b2420a49884 100644 --- a/trunk/arch/powerpc/include/asm/system.h +++ b/trunk/arch/powerpc/include/asm/system.h @@ -212,7 +212,7 @@ extern struct task_struct *_switch(struct thread_struct *prev, extern unsigned int rtas_data; extern int mem_init_done; /* set on boot once kmalloc can be called */ extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ -extern unsigned long memory_limit; +extern phys_addr_t memory_limit; extern unsigned long klimit; extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); diff --git a/trunk/arch/powerpc/include/asm/unistd.h b/trunk/arch/powerpc/include/asm/unistd.h index 3f06f8ec81c5..4badac2d11d1 100644 --- a/trunk/arch/powerpc/include/asm/unistd.h +++ b/trunk/arch/powerpc/include/asm/unistd.h @@ -341,6 +341,7 @@ #define __NR_dup3 316 #define __NR_pipe2 317 #define __NR_inotify_init1 318 +#define __NR_perf_counter_open 319 #define __NR_preadv 320 #define __NR_pwritev 321 diff --git a/trunk/arch/powerpc/kernel/Makefile b/trunk/arch/powerpc/kernel/Makefile index 71901fbda4a5..a2c683403c2b 100644 --- a/trunk/arch/powerpc/kernel/Makefile +++ b/trunk/arch/powerpc/kernel/Makefile @@ -94,6 +94,9 @@ obj64-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o power4-pmu.o ppc970-pmu.o \ + power5-pmu.o power5+-pmu.o power6-pmu.o \ + power7-pmu.o obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o diff --git a/trunk/arch/powerpc/kernel/asm-offsets.c b/trunk/arch/powerpc/kernel/asm-offsets.c index 1e40bc053946..e981d1ce1914 100644 --- a/trunk/arch/powerpc/kernel/asm-offsets.c +++ b/trunk/arch/powerpc/kernel/asm-offsets.c @@ -131,6 +131,7 @@ int main(void) DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr)); DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled)); DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled)); + DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending)); DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); diff --git a/trunk/arch/powerpc/kernel/cputable.c b/trunk/arch/powerpc/kernel/cputable.c index 57db50f40289..3e33fb933d99 100644 --- a/trunk/arch/powerpc/kernel/cputable.c +++ b/trunk/arch/powerpc/kernel/cputable.c @@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power5+", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, { /* Power6 */ @@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power6", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power6", }, { /* 2.06-compliant processor, i.e. Power7 "architected" mode */ @@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power7", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .platform = "power7", }, { /* Power7 */ @@ -1766,7 +1769,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_E500MC, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | - MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE, + MMU_FTR_USE_TLBILX, .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, @@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) - t->oprofile_cpu_type = s->oprofile_cpu_type; + if (old.oprofile_cpu_type != NULL) { + t->oprofile_cpu_type = old.oprofile_cpu_type; + t->oprofile_type = old.oprofile_type; + } } *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; diff --git a/trunk/arch/powerpc/kernel/dma.c b/trunk/arch/powerpc/kernel/dma.c index 53c7788cba78..6b02793dc75b 100644 --- a/trunk/arch/powerpc/kernel/dma.c +++ b/trunk/arch/powerpc/kernel/dma.c @@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size, { void *ret; #ifdef CONFIG_NOT_COHERENT_CACHE - ret = __dma_alloc_coherent(size, dma_handle, flag); + ret = __dma_alloc_coherent(dev, size, dma_handle, flag); if (ret == NULL) return NULL; *dma_handle += get_dma_direct_offset(dev); diff --git a/trunk/arch/powerpc/kernel/entry_64.S b/trunk/arch/powerpc/kernel/entry_64.S index abfc32330479..43e073477c34 100644 --- a/trunk/arch/powerpc/kernel/entry_64.S +++ b/trunk/arch/powerpc/kernel/entry_64.S @@ -526,6 +526,15 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) 2: TRACE_AND_RESTORE_IRQ(r5); +#ifdef CONFIG_PERF_COUNTERS + /* check paca->perf_counter_pending if we're enabling ints */ + lbz r3,PACAPERFPEND(r13) + and. r3,r3,r5 + beq 27f + bl .perf_counter_do_pending +27: +#endif /* CONFIG_PERF_COUNTERS */ + /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ diff --git a/trunk/arch/powerpc/kernel/ftrace.c b/trunk/arch/powerpc/kernel/ftrace.c index 70e2a736be1f..2d182f119d1d 100644 --- a/trunk/arch/powerpc/kernel/ftrace.c +++ b/trunk/arch/powerpc/kernel/ftrace.c @@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod, * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12) */ - pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); + pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x", jmp[0], jmp[1]); + pr_devel(" %08x %08x", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d820000) || @@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod, offset = ((unsigned)((unsigned short)jmp[0]) << 16) + (int)((short)jmp[1]); - pr_debug(" %x ", offset); + pr_devel(" %x ", offset); /* get the address this jumps too */ tramp = mod->arch.toc + offset + 32; - pr_debug("toc: %lx", tramp); + pr_devel("toc: %lx", tramp); if (probe_kernel_read(jmp, (void *)tramp, 8)) { printk(KERN_ERR "Failed to read %lx\n", tramp); return -EFAULT; } - pr_debug(" %08x %08x\n", jmp[0], jmp[1]); + pr_devel(" %08x %08x\n", jmp[0], jmp[1]); ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; @@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod, * 0x4e, 0x80, 0x04, 0x20 bctr */ - pr_debug("ip:%lx jumps to %lx", ip, tramp); + pr_devel("ip:%lx jumps to %lx", ip, tramp); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x ", jmp[0], jmp[1]); + pr_devel(" %08x %08x ", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d600000) || @@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod, if (tramp & 0x8000) tramp -= 0x10000; - pr_debug(" %lx ", tramp); + pr_devel(" %lx ", tramp); if (tramp != addr) { printk(KERN_ERR @@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) /* ld r2,40(r1) */ op[1] = 0xe8410028; - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2)) return -EPERM; @@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return -EINVAL; } - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) return -EPERM; @@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) PPC_LONG "2b,4b\n" ".previous" - : [old] "=r" (old), [faulted] "=r" (faulted) + : [old] "=&r" (old), [faulted] "=r" (faulted) : [parent] "r" (parent), [return_hooker] "r" (return_hooker) : "memory" ); diff --git a/trunk/arch/powerpc/kernel/head_32.S b/trunk/arch/powerpc/kernel/head_32.S index 54e68c11ae15..c01467f952d3 100644 --- a/trunk/arch/powerpc/kernel/head_32.S +++ b/trunk/arch/powerpc/kernel/head_32.S @@ -21,6 +21,7 @@ * */ +#include #include #include #include @@ -50,7 +51,7 @@ mtspr SPRN_DBAT##n##L,RB; \ 1: - .section .text.head, "ax" + __HEAD .stabs "arch/powerpc/kernel/",N_SO,0,0,0f .stabs "head_32.S",N_SO,0,0,0f 0: diff --git a/trunk/arch/powerpc/kernel/head_40x.S b/trunk/arch/powerpc/kernel/head_40x.S index 56d8e5d90c5b..0c96911d4299 100644 --- a/trunk/arch/powerpc/kernel/head_40x.S +++ b/trunk/arch/powerpc/kernel/head_40x.S @@ -31,6 +31,7 @@ * */ +#include #include #include #include @@ -52,7 +53,7 @@ * * This is all going to change RSN when we add bi_recs....... -- Dan */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/trunk/arch/powerpc/kernel/head_44x.S b/trunk/arch/powerpc/kernel/head_44x.S index b56fecc93a16..18d8a1677c4d 100644 --- a/trunk/arch/powerpc/kernel/head_44x.S +++ b/trunk/arch/powerpc/kernel/head_44x.S @@ -28,6 +28,7 @@ * option) any later version. */ +#include #include #include #include @@ -50,7 +51,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/trunk/arch/powerpc/kernel/head_8xx.S b/trunk/arch/powerpc/kernel/head_8xx.S index 3c9452d4308b..52ff8c53b93c 100644 --- a/trunk/arch/powerpc/kernel/head_8xx.S +++ b/trunk/arch/powerpc/kernel/head_8xx.S @@ -19,6 +19,7 @@ * */ +#include #include #include #include @@ -38,7 +39,7 @@ #else #define DO_8xx_CPU6(val, reg) #endif - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/trunk/arch/powerpc/kernel/head_fsl_booke.S b/trunk/arch/powerpc/kernel/head_fsl_booke.S index 4c22620d009b..5bdcc06d294c 100644 --- a/trunk/arch/powerpc/kernel/head_fsl_booke.S +++ b/trunk/arch/powerpc/kernel/head_fsl_booke.S @@ -30,6 +30,7 @@ * option) any later version. */ +#include #include #include #include @@ -53,7 +54,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/trunk/arch/powerpc/kernel/irq.c b/trunk/arch/powerpc/kernel/irq.c index 8c1a4966867e..844d3f882a15 100644 --- a/trunk/arch/powerpc/kernel/irq.c +++ b/trunk/arch/powerpc/kernel/irq.c @@ -53,6 +53,7 @@ #include #include #include +#include #include #include @@ -135,6 +136,11 @@ notrace void raw_local_irq_restore(unsigned long en) iseries_handle_interrupts(); } + if (test_perf_counter_pending()) { + clear_perf_counter_pending(); + perf_counter_do_pending(); + } + /* * if (get_paca()->hard_enabled) return; * But again we need to take care that gcc gets hard_enabled directly diff --git a/trunk/arch/powerpc/kernel/machine_kexec.c b/trunk/arch/powerpc/kernel/machine_kexec.c index d59e2b1bdcba..bb3d893a8353 100644 --- a/trunk/arch/powerpc/kernel/machine_kexec.c +++ b/trunk/arch/powerpc/kernel/machine_kexec.c @@ -125,8 +125,8 @@ void __init reserve_crashkernel(void) /* Crash kernel trumps memory limit */ if (memory_limit && memory_limit <= crashk_res.end) { memory_limit = crashk_res.end + 1; - printk("Adjusted memory limit for crashkernel, now 0x%lx\n", - memory_limit); + printk("Adjusted memory limit for crashkernel, now 0x%llx\n", + (unsigned long long)memory_limit); } printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " diff --git a/trunk/arch/powerpc/kernel/module.c b/trunk/arch/powerpc/kernel/module.c index 43e7e3a7f130..477c663e0140 100644 --- a/trunk/arch/powerpc/kernel/module.c +++ b/trunk/arch/powerpc/kernel/module.c @@ -43,8 +43,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, diff --git a/trunk/arch/powerpc/kernel/pci-common.c b/trunk/arch/powerpc/kernel/pci-common.c index 9c69e7e145c5..4fee63cb53ff 100644 --- a/trunk/arch/powerpc/kernel/pci-common.c +++ b/trunk/arch/powerpc/kernel/pci-common.c @@ -1366,12 +1366,17 @@ static void __init pcibios_allocate_resources(int pass) for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); - for (idx = 0; idx < 6; idx++) { + for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; if (!r->flags || (r->flags & IORESOURCE_UNSET)) continue; /* Not assigned at all */ + /* We only allocate ROMs on pass 1 just in case they + * have been screwed up by firmware + */ + if (idx == PCI_ROM_RESOURCE ) + disabled = 1; if (r->flags & IORESOURCE_IO) disabled = !(command & PCI_COMMAND_IO); else @@ -1382,17 +1387,19 @@ static void __init pcibios_allocate_resources(int pass) if (pass) continue; r = &dev->resource[PCI_ROM_RESOURCE]; - if (r->flags & IORESOURCE_ROM_ENABLE) { + if (r->flags) { /* Turn the ROM off, leave the resource region, * but keep it unregistered. */ u32 reg; - pr_debug("PCI: Switching off ROM of %s\n", - pci_name(dev)); - r->flags &= ~IORESOURCE_ROM_ENABLE; pci_read_config_dword(dev, dev->rom_base_reg, ®); - pci_write_config_dword(dev, dev->rom_base_reg, - reg & ~PCI_ROM_ADDRESS_ENABLE); + if (reg & PCI_ROM_ADDRESS_ENABLE) { + pr_debug("PCI: Switching off ROM of %s\n", + pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); + } } } } diff --git a/trunk/arch/powerpc/kernel/pci_64.c b/trunk/arch/powerpc/kernel/pci_64.c index be574fc0d92f..96edb6f8babb 100644 --- a/trunk/arch/powerpc/kernel/pci_64.c +++ b/trunk/arch/powerpc/kernel/pci_64.c @@ -64,7 +64,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def) return def; } -static unsigned int pci_parse_of_flags(u32 addr0) +static unsigned int pci_parse_of_flags(u32 addr0, int bridge) { unsigned int flags = 0; @@ -75,8 +75,17 @@ static unsigned int pci_parse_of_flags(u32 addr0) if (addr0 & 0x40000000) flags |= IORESOURCE_PREFETCH | PCI_BASE_ADDRESS_MEM_PREFETCH; + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & 0xff) == 0x30) + flags |= IORESOURCE_READONLY; } else if (addr0 & 0x01000000) flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + if (flags) + flags |= IORESOURCE_SIZEALIGN; return flags; } @@ -95,7 +104,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) return; pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); for (; proplen >= 20; proplen -= 20, addrs += 5) { - flags = pci_parse_of_flags(addrs[0]); + flags = pci_parse_of_flags(addrs[0], 0); if (!flags) continue; base = of_read_number(&addrs[1], 2); @@ -293,7 +302,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node, } i = 1; for (; len >= 32; len -= 32, ranges += 8) { - flags = pci_parse_of_flags(ranges[0]); + flags = pci_parse_of_flags(ranges[0], 1); size = of_read_number(&ranges[6], 2); if (flags == 0 || size == 0) continue; diff --git a/trunk/arch/powerpc/kernel/perf_counter.c b/trunk/arch/powerpc/kernel/perf_counter.c new file mode 100644 index 000000000000..bb202388170e --- /dev/null +++ b/trunk/arch/powerpc/kernel/perf_counter.c @@ -0,0 +1,1263 @@ +/* + * Performance counter support - powerpc architecture code + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct cpu_hw_counters { + int n_counters; + int n_percpu; + int disabled; + int n_added; + int n_limited; + u8 pmcs_enabled; + struct perf_counter *counter[MAX_HWCOUNTERS]; + u64 events[MAX_HWCOUNTERS]; + unsigned int flags[MAX_HWCOUNTERS]; + u64 mmcr[3]; + struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS]; + u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; +}; +DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters); + +struct power_pmu *ppmu; + +/* + * Normally, to ignore kernel events we set the FCS (freeze counters + * in supervisor mode) bit in MMCR0, but if the kernel runs with the + * hypervisor bit set in the MSR, or if we are running on a processor + * where the hypervisor bit is forced to 1 (as on Apple G5 processors), + * then we need to use the FCHV bit to ignore kernel events. + */ +static unsigned int freeze_counters_kernel = MMCR0_FCS; + +static void perf_counter_interrupt(struct pt_regs *regs); + +void perf_counter_print_debug(void) +{ +} + +/* + * Read one performance monitor counter (PMC). + */ +static unsigned long read_pmc(int idx) +{ + unsigned long val; + + switch (idx) { + case 1: + val = mfspr(SPRN_PMC1); + break; + case 2: + val = mfspr(SPRN_PMC2); + break; + case 3: + val = mfspr(SPRN_PMC3); + break; + case 4: + val = mfspr(SPRN_PMC4); + break; + case 5: + val = mfspr(SPRN_PMC5); + break; + case 6: + val = mfspr(SPRN_PMC6); + break; + case 7: + val = mfspr(SPRN_PMC7); + break; + case 8: + val = mfspr(SPRN_PMC8); + break; + default: + printk(KERN_ERR "oops trying to read PMC%d\n", idx); + val = 0; + } + return val; +} + +/* + * Write one PMC. + */ +static void write_pmc(int idx, unsigned long val) +{ + switch (idx) { + case 1: + mtspr(SPRN_PMC1, val); + break; + case 2: + mtspr(SPRN_PMC2, val); + break; + case 3: + mtspr(SPRN_PMC3, val); + break; + case 4: + mtspr(SPRN_PMC4, val); + break; + case 5: + mtspr(SPRN_PMC5, val); + break; + case 6: + mtspr(SPRN_PMC6, val); + break; + case 7: + mtspr(SPRN_PMC7, val); + break; + case 8: + mtspr(SPRN_PMC8, val); + break; + default: + printk(KERN_ERR "oops trying to write PMC%d\n", idx); + } +} + +/* + * Check if a set of events can all go on the PMU at once. + * If they can't, this will look at alternative codes for the events + * and see if any combination of alternative codes is feasible. + * The feasible set is returned in event[]. + */ +static int power_check_constraints(u64 event[], unsigned int cflags[], + int n_ev) +{ + u64 mask, value, nv; + u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + u64 amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + u64 avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + u64 smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; + int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS]; + int i, j; + u64 addf = ppmu->add_fields; + u64 tadd = ppmu->test_adder; + + if (n_ev > ppmu->n_counter) + return -1; + + /* First see if the events will go on as-is */ + for (i = 0; i < n_ev; ++i) { + if ((cflags[i] & PPMU_LIMITED_PMC_REQD) + && !ppmu->limited_pmc_event(event[i])) { + ppmu->get_alternatives(event[i], cflags[i], + alternatives[i]); + event[i] = alternatives[i][0]; + } + if (ppmu->get_constraint(event[i], &amasks[i][0], + &avalues[i][0])) + return -1; + } + value = mask = 0; + for (i = 0; i < n_ev; ++i) { + nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf); + if ((((nv + tadd) ^ value) & mask) != 0 || + (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0) + break; + value = nv; + mask |= amasks[i][0]; + } + if (i == n_ev) + return 0; /* all OK */ + + /* doesn't work, gather alternatives... */ + if (!ppmu->get_alternatives) + return -1; + for (i = 0; i < n_ev; ++i) { + choice[i] = 0; + n_alt[i] = ppmu->get_alternatives(event[i], cflags[i], + alternatives[i]); + for (j = 1; j < n_alt[i]; ++j) + ppmu->get_constraint(alternatives[i][j], + &amasks[i][j], &avalues[i][j]); + } + + /* enumerate all possibilities and see if any will work */ + i = 0; + j = -1; + value = mask = nv = 0; + while (i < n_ev) { + if (j >= 0) { + /* we're backtracking, restore context */ + value = svalues[i]; + mask = smasks[i]; + j = choice[i]; + } + /* + * See if any alternative k for event i, + * where k > j, will satisfy the constraints. + */ + while (++j < n_alt[i]) { + nv = (value | avalues[i][j]) + + (value & avalues[i][j] & addf); + if ((((nv + tadd) ^ value) & mask) == 0 && + (((nv + tadd) ^ avalues[i][j]) + & amasks[i][j]) == 0) + break; + } + if (j >= n_alt[i]) { + /* + * No feasible alternative, backtrack + * to event i-1 and continue enumerating its + * alternatives from where we got up to. + */ + if (--i < 0) + return -1; + } else { + /* + * Found a feasible alternative for event i, + * remember where we got up to with this event, + * go on to the next event, and start with + * the first alternative for it. + */ + choice[i] = j; + svalues[i] = value; + smasks[i] = mask; + value = nv; + mask |= amasks[i][j]; + ++i; + j = -1; + } + } + + /* OK, we have a feasible combination, tell the caller the solution */ + for (i = 0; i < n_ev; ++i) + event[i] = alternatives[i][choice[i]]; + return 0; +} + +/* + * Check if newly-added counters have consistent settings for + * exclude_{user,kernel,hv} with each other and any previously + * added counters. + */ +static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], + int n_prev, int n_new) +{ + int eu = 0, ek = 0, eh = 0; + int i, n, first; + struct perf_counter *counter; + + n = n_prev + n_new; + if (n <= 1) + return 0; + + first = 1; + for (i = 0; i < n; ++i) { + if (cflags[i] & PPMU_LIMITED_PMC_OK) { + cflags[i] &= ~PPMU_LIMITED_PMC_REQD; + continue; + } + counter = ctrs[i]; + if (first) { + eu = counter->attr.exclude_user; + ek = counter->attr.exclude_kernel; + eh = counter->attr.exclude_hv; + first = 0; + } else if (counter->attr.exclude_user != eu || + counter->attr.exclude_kernel != ek || + counter->attr.exclude_hv != eh) { + return -EAGAIN; + } + } + + if (eu || ek || eh) + for (i = 0; i < n; ++i) + if (cflags[i] & PPMU_LIMITED_PMC_OK) + cflags[i] |= PPMU_LIMITED_PMC_REQD; + + return 0; +} + +static void power_pmu_read(struct perf_counter *counter) +{ + long val, delta, prev; + + if (!counter->hw.idx) + return; + /* + * Performance monitor interrupts come even when interrupts + * are soft-disabled, as long as interrupts are hard-enabled. + * Therefore we treat them like NMIs. + */ + do { + prev = atomic64_read(&counter->hw.prev_count); + barrier(); + val = read_pmc(counter->hw.idx); + } while (atomic64_cmpxchg(&counter->hw.prev_count, prev, val) != prev); + + /* The counters are only 32 bits wide */ + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &counter->count); + atomic64_sub(delta, &counter->hw.period_left); +} + +/* + * On some machines, PMC5 and PMC6 can't be written, don't respect + * the freeze conditions, and don't generate interrupts. This tells + * us if `counter' is using such a PMC. + */ +static int is_limited_pmc(int pmcnum) +{ + return (ppmu->flags & PPMU_LIMITED_PMC5_6) + && (pmcnum == 5 || pmcnum == 6); +} + +static void freeze_limited_counters(struct cpu_hw_counters *cpuhw, + unsigned long pmc5, unsigned long pmc6) +{ + struct perf_counter *counter; + u64 val, prev, delta; + int i; + + for (i = 0; i < cpuhw->n_limited; ++i) { + counter = cpuhw->limited_counter[i]; + if (!counter->hw.idx) + continue; + val = (counter->hw.idx == 5) ? pmc5 : pmc6; + prev = atomic64_read(&counter->hw.prev_count); + counter->hw.idx = 0; + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &counter->count); + } +} + +static void thaw_limited_counters(struct cpu_hw_counters *cpuhw, + unsigned long pmc5, unsigned long pmc6) +{ + struct perf_counter *counter; + u64 val; + int i; + + for (i = 0; i < cpuhw->n_limited; ++i) { + counter = cpuhw->limited_counter[i]; + counter->hw.idx = cpuhw->limited_hwidx[i]; + val = (counter->hw.idx == 5) ? pmc5 : pmc6; + atomic64_set(&counter->hw.prev_count, val); + perf_counter_update_userpage(counter); + } +} + +/* + * Since limited counters don't respect the freeze conditions, we + * have to read them immediately after freezing or unfreezing the + * other counters. We try to keep the values from the limited + * counters as consistent as possible by keeping the delay (in + * cycles and instructions) between freezing/unfreezing and reading + * the limited counters as small and consistent as possible. + * Therefore, if any limited counters are in use, we read them + * both, and always in the same order, to minimize variability, + * and do it inside the same asm that writes MMCR0. + */ +static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) +{ + unsigned long pmc5, pmc6; + + if (!cpuhw->n_limited) { + mtspr(SPRN_MMCR0, mmcr0); + return; + } + + /* + * Write MMCR0, then read PMC5 and PMC6 immediately. + * To ensure we don't get a performance monitor interrupt + * between writing MMCR0 and freezing/thawing the limited + * counters, we first write MMCR0 with the counter overflow + * interrupt enable bits turned off. + */ + asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5" + : "=&r" (pmc5), "=&r" (pmc6) + : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)), + "i" (SPRN_MMCR0), + "i" (SPRN_PMC5), "i" (SPRN_PMC6)); + + if (mmcr0 & MMCR0_FC) + freeze_limited_counters(cpuhw, pmc5, pmc6); + else + thaw_limited_counters(cpuhw, pmc5, pmc6); + + /* + * Write the full MMCR0 including the counter overflow interrupt + * enable bits, if necessary. + */ + if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE)) + mtspr(SPRN_MMCR0, mmcr0); +} + +/* + * Disable all counters to prevent PMU interrupts and to allow + * counters to be added or removed. + */ +void hw_perf_disable(void) +{ + struct cpu_hw_counters *cpuhw; + unsigned long ret; + unsigned long flags; + + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_counters); + + ret = cpuhw->disabled; + if (!ret) { + cpuhw->disabled = 1; + cpuhw->n_added = 0; + + /* + * Check if we ever enabled the PMU on this cpu. + */ + if (!cpuhw->pmcs_enabled) { + if (ppc_md.enable_pmcs) + ppc_md.enable_pmcs(); + cpuhw->pmcs_enabled = 1; + } + + /* + * Disable instruction sampling if it was enabled + */ + if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { + mtspr(SPRN_MMCRA, + cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mb(); + } + + /* + * Set the 'freeze counters' bit. + * The barrier is to make sure the mtspr has been + * executed and the PMU has frozen the counters + * before we return. + */ + write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC); + mb(); + } + local_irq_restore(flags); +} + +/* + * Re-enable all counters if disable == 0. + * If we were previously disabled and counters were added, then + * put the new config on the PMU. + */ +void hw_perf_enable(void) +{ + struct perf_counter *counter; + struct cpu_hw_counters *cpuhw; + unsigned long flags; + long i; + unsigned long val; + s64 left; + unsigned int hwc_index[MAX_HWCOUNTERS]; + int n_lim; + int idx; + + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_counters); + if (!cpuhw->disabled) { + local_irq_restore(flags); + return; + } + cpuhw->disabled = 0; + + /* + * If we didn't change anything, or only removed counters, + * no need to recalculate MMCR* settings and reset the PMCs. + * Just reenable the PMU with the current MMCR* settings + * (possibly updated for removal of counters). + */ + if (!cpuhw->n_added) { + mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); + if (cpuhw->n_counters == 0) + get_lppaca()->pmcregs_in_use = 0; + goto out_enable; + } + + /* + * Compute MMCR* values for the new set of counters + */ + if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_counters, hwc_index, + cpuhw->mmcr)) { + /* shouldn't ever get here */ + printk(KERN_ERR "oops compute_mmcr failed\n"); + goto out; + } + + /* + * Add in MMCR0 freeze bits corresponding to the + * attr.exclude_* bits for the first counter. + * We have already checked that all counters have the + * same values for these bits as the first counter. + */ + counter = cpuhw->counter[0]; + if (counter->attr.exclude_user) + cpuhw->mmcr[0] |= MMCR0_FCP; + if (counter->attr.exclude_kernel) + cpuhw->mmcr[0] |= freeze_counters_kernel; + if (counter->attr.exclude_hv) + cpuhw->mmcr[0] |= MMCR0_FCHV; + + /* + * Write the new configuration to MMCR* with the freeze + * bit set and set the hardware counters to their initial values. + * Then unfreeze the counters. + */ + get_lppaca()->pmcregs_in_use = 1; + mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); + mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) + | MMCR0_FC); + + /* + * Read off any pre-existing counters that need to move + * to another PMC. + */ + for (i = 0; i < cpuhw->n_counters; ++i) { + counter = cpuhw->counter[i]; + if (counter->hw.idx && counter->hw.idx != hwc_index[i] + 1) { + power_pmu_read(counter); + write_pmc(counter->hw.idx, 0); + counter->hw.idx = 0; + } + } + + /* + * Initialize the PMCs for all the new and moved counters. + */ + cpuhw->n_limited = n_lim = 0; + for (i = 0; i < cpuhw->n_counters; ++i) { + counter = cpuhw->counter[i]; + if (counter->hw.idx) + continue; + idx = hwc_index[i] + 1; + if (is_limited_pmc(idx)) { + cpuhw->limited_counter[n_lim] = counter; + cpuhw->limited_hwidx[n_lim] = idx; + ++n_lim; + continue; + } + val = 0; + if (counter->hw.sample_period) { + left = atomic64_read(&counter->hw.period_left); + if (left < 0x80000000L) + val = 0x80000000L - left; + } + atomic64_set(&counter->hw.prev_count, val); + counter->hw.idx = idx; + write_pmc(idx, val); + perf_counter_update_userpage(counter); + } + cpuhw->n_limited = n_lim; + cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE; + + out_enable: + mb(); + write_mmcr0(cpuhw, cpuhw->mmcr[0]); + + /* + * Enable instruction sampling if necessary + */ + if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { + mb(); + mtspr(SPRN_MMCRA, cpuhw->mmcr[2]); + } + + out: + local_irq_restore(flags); +} + +static int collect_events(struct perf_counter *group, int max_count, + struct perf_counter *ctrs[], u64 *events, + unsigned int *flags) +{ + int n = 0; + struct perf_counter *counter; + + if (!is_software_counter(group)) { + if (n >= max_count) + return -1; + ctrs[n] = group; + flags[n] = group->hw.counter_base; + events[n++] = group->hw.config; + } + list_for_each_entry(counter, &group->sibling_list, list_entry) { + if (!is_software_counter(counter) && + counter->state != PERF_COUNTER_STATE_OFF) { + if (n >= max_count) + return -1; + ctrs[n] = counter; + flags[n] = counter->hw.counter_base; + events[n++] = counter->hw.config; + } + } + return n; +} + +static void counter_sched_in(struct perf_counter *counter, int cpu) +{ + counter->state = PERF_COUNTER_STATE_ACTIVE; + counter->oncpu = cpu; + counter->tstamp_running += counter->ctx->time - counter->tstamp_stopped; + if (is_software_counter(counter)) + counter->pmu->enable(counter); +} + +/* + * Called to enable a whole group of counters. + * Returns 1 if the group was enabled, or -EAGAIN if it could not be. + * Assumes the caller has disabled interrupts and has + * frozen the PMU with hw_perf_save_disable. + */ +int hw_perf_group_sched_in(struct perf_counter *group_leader, + struct perf_cpu_context *cpuctx, + struct perf_counter_context *ctx, int cpu) +{ + struct cpu_hw_counters *cpuhw; + long i, n, n0; + struct perf_counter *sub; + + cpuhw = &__get_cpu_var(cpu_hw_counters); + n0 = cpuhw->n_counters; + n = collect_events(group_leader, ppmu->n_counter - n0, + &cpuhw->counter[n0], &cpuhw->events[n0], + &cpuhw->flags[n0]); + if (n < 0) + return -EAGAIN; + if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n)) + return -EAGAIN; + i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0); + if (i < 0) + return -EAGAIN; + cpuhw->n_counters = n0 + n; + cpuhw->n_added += n; + + /* + * OK, this group can go on; update counter states etc., + * and enable any software counters + */ + for (i = n0; i < n0 + n; ++i) + cpuhw->counter[i]->hw.config = cpuhw->events[i]; + cpuctx->active_oncpu += n; + n = 1; + counter_sched_in(group_leader, cpu); + list_for_each_entry(sub, &group_leader->sibling_list, list_entry) { + if (sub->state != PERF_COUNTER_STATE_OFF) { + counter_sched_in(sub, cpu); + ++n; + } + } + ctx->nr_active += n; + + return 1; +} + +/* + * Add a counter to the PMU. + * If all counters are not already frozen, then we disable and + * re-enable the PMU in order to get hw_perf_enable to do the + * actual work of reconfiguring the PMU. + */ +static int power_pmu_enable(struct perf_counter *counter) +{ + struct cpu_hw_counters *cpuhw; + unsigned long flags; + int n0; + int ret = -EAGAIN; + + local_irq_save(flags); + perf_disable(); + + /* + * Add the counter to the list (if there is room) + * and check whether the total set is still feasible. + */ + cpuhw = &__get_cpu_var(cpu_hw_counters); + n0 = cpuhw->n_counters; + if (n0 >= ppmu->n_counter) + goto out; + cpuhw->counter[n0] = counter; + cpuhw->events[n0] = counter->hw.config; + cpuhw->flags[n0] = counter->hw.counter_base; + if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1)) + goto out; + if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1)) + goto out; + + counter->hw.config = cpuhw->events[n0]; + ++cpuhw->n_counters; + ++cpuhw->n_added; + + ret = 0; + out: + perf_enable(); + local_irq_restore(flags); + return ret; +} + +/* + * Remove a counter from the PMU. + */ +static void power_pmu_disable(struct perf_counter *counter) +{ + struct cpu_hw_counters *cpuhw; + long i; + unsigned long flags; + + local_irq_save(flags); + perf_disable(); + + power_pmu_read(counter); + + cpuhw = &__get_cpu_var(cpu_hw_counters); + for (i = 0; i < cpuhw->n_counters; ++i) { + if (counter == cpuhw->counter[i]) { + while (++i < cpuhw->n_counters) + cpuhw->counter[i-1] = cpuhw->counter[i]; + --cpuhw->n_counters; + ppmu->disable_pmc(counter->hw.idx - 1, cpuhw->mmcr); + if (counter->hw.idx) { + write_pmc(counter->hw.idx, 0); + counter->hw.idx = 0; + } + perf_counter_update_userpage(counter); + break; + } + } + for (i = 0; i < cpuhw->n_limited; ++i) + if (counter == cpuhw->limited_counter[i]) + break; + if (i < cpuhw->n_limited) { + while (++i < cpuhw->n_limited) { + cpuhw->limited_counter[i-1] = cpuhw->limited_counter[i]; + cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i]; + } + --cpuhw->n_limited; + } + if (cpuhw->n_counters == 0) { + /* disable exceptions if no counters are running */ + cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE); + } + + perf_enable(); + local_irq_restore(flags); +} + +/* + * Re-enable interrupts on a counter after they were throttled + * because they were coming too fast. + */ +static void power_pmu_unthrottle(struct perf_counter *counter) +{ + s64 val, left; + unsigned long flags; + + if (!counter->hw.idx || !counter->hw.sample_period) + return; + local_irq_save(flags); + perf_disable(); + power_pmu_read(counter); + left = counter->hw.sample_period; + counter->hw.last_period = left; + val = 0; + if (left < 0x80000000L) + val = 0x80000000L - left; + write_pmc(counter->hw.idx, val); + atomic64_set(&counter->hw.prev_count, val); + atomic64_set(&counter->hw.period_left, left); + perf_counter_update_userpage(counter); + perf_enable(); + local_irq_restore(flags); +} + +struct pmu power_pmu = { + .enable = power_pmu_enable, + .disable = power_pmu_disable, + .read = power_pmu_read, + .unthrottle = power_pmu_unthrottle, +}; + +/* + * Return 1 if we might be able to put counter on a limited PMC, + * or 0 if not. + * A counter can only go on a limited PMC if it counts something + * that a limited PMC can count, doesn't require interrupts, and + * doesn't exclude any processor mode. + */ +static int can_go_on_limited_pmc(struct perf_counter *counter, u64 ev, + unsigned int flags) +{ + int n; + u64 alt[MAX_EVENT_ALTERNATIVES]; + + if (counter->attr.exclude_user + || counter->attr.exclude_kernel + || counter->attr.exclude_hv + || counter->attr.sample_period) + return 0; + + if (ppmu->limited_pmc_event(ev)) + return 1; + + /* + * The requested event isn't on a limited PMC already; + * see if any alternative code goes on a limited PMC. + */ + if (!ppmu->get_alternatives) + return 0; + + flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD; + n = ppmu->get_alternatives(ev, flags, alt); + + return n > 0; +} + +/* + * Find an alternative event that goes on a normal PMC, if possible, + * and return the event code, or 0 if there is no such alternative. + * (Note: event code 0 is "don't count" on all machines.) + */ +static u64 normal_pmc_alternative(u64 ev, unsigned long flags) +{ + u64 alt[MAX_EVENT_ALTERNATIVES]; + int n; + + flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD); + n = ppmu->get_alternatives(ev, flags, alt); + if (!n) + return 0; + return alt[0]; +} + +/* Number of perf_counters counting hardware events */ +static atomic_t num_counters; +/* Used to avoid races in calling reserve/release_pmc_hardware */ +static DEFINE_MUTEX(pmc_reserve_mutex); + +/* + * Release the PMU if this is the last perf_counter. + */ +static void hw_perf_counter_destroy(struct perf_counter *counter) +{ + if (!atomic_add_unless(&num_counters, -1, 1)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_dec_return(&num_counters) == 0) + release_pmc_hardware(); + mutex_unlock(&pmc_reserve_mutex); + } +} + +/* + * Translate a generic cache event config to a raw event code. + */ +static int hw_perf_cache_event(u64 config, u64 *eventp) +{ + unsigned long type, op, result; + int ev; + + if (!ppmu->cache_events) + return -EINVAL; + + /* unpack config */ + type = config & 0xff; + op = (config >> 8) & 0xff; + result = (config >> 16) & 0xff; + + if (type >= PERF_COUNT_HW_CACHE_MAX || + op >= PERF_COUNT_HW_CACHE_OP_MAX || + result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ev = (*ppmu->cache_events)[type][op][result]; + if (ev == 0) + return -EOPNOTSUPP; + if (ev == -1) + return -EINVAL; + *eventp = ev; + return 0; +} + +const struct pmu *hw_perf_counter_init(struct perf_counter *counter) +{ + u64 ev; + unsigned long flags; + struct perf_counter *ctrs[MAX_HWCOUNTERS]; + u64 events[MAX_HWCOUNTERS]; + unsigned int cflags[MAX_HWCOUNTERS]; + int n; + int err; + + if (!ppmu) + return ERR_PTR(-ENXIO); + switch (counter->attr.type) { + case PERF_TYPE_HARDWARE: + ev = counter->attr.config; + if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0) + return ERR_PTR(-EOPNOTSUPP); + ev = ppmu->generic_events[ev]; + break; + case PERF_TYPE_HW_CACHE: + err = hw_perf_cache_event(counter->attr.config, &ev); + if (err) + return ERR_PTR(err); + break; + case PERF_TYPE_RAW: + ev = counter->attr.config; + break; + } + counter->hw.config_base = ev; + counter->hw.idx = 0; + + /* + * If we are not running on a hypervisor, force the + * exclude_hv bit to 0 so that we don't care what + * the user set it to. + */ + if (!firmware_has_feature(FW_FEATURE_LPAR)) + counter->attr.exclude_hv = 0; + + /* + * If this is a per-task counter, then we can use + * PM_RUN_* events interchangeably with their non RUN_* + * equivalents, e.g. PM_RUN_CYC instead of PM_CYC. + * XXX we should check if the task is an idle task. + */ + flags = 0; + if (counter->ctx->task) + flags |= PPMU_ONLY_COUNT_RUN; + + /* + * If this machine has limited counters, check whether this + * event could go on a limited counter. + */ + if (ppmu->flags & PPMU_LIMITED_PMC5_6) { + if (can_go_on_limited_pmc(counter, ev, flags)) { + flags |= PPMU_LIMITED_PMC_OK; + } else if (ppmu->limited_pmc_event(ev)) { + /* + * The requested event is on a limited PMC, + * but we can't use a limited PMC; see if any + * alternative goes on a normal PMC. + */ + ev = normal_pmc_alternative(ev, flags); + if (!ev) + return ERR_PTR(-EINVAL); + } + } + + /* + * If this is in a group, check if it can go on with all the + * other hardware counters in the group. We assume the counter + * hasn't been linked into its leader's sibling list at this point. + */ + n = 0; + if (counter->group_leader != counter) { + n = collect_events(counter->group_leader, ppmu->n_counter - 1, + ctrs, events, cflags); + if (n < 0) + return ERR_PTR(-EINVAL); + } + events[n] = ev; + ctrs[n] = counter; + cflags[n] = flags; + if (check_excludes(ctrs, cflags, n, 1)) + return ERR_PTR(-EINVAL); + if (power_check_constraints(events, cflags, n + 1)) + return ERR_PTR(-EINVAL); + + counter->hw.config = events[n]; + counter->hw.counter_base = cflags[n]; + counter->hw.last_period = counter->hw.sample_period; + atomic64_set(&counter->hw.period_left, counter->hw.last_period); + + /* + * See if we need to reserve the PMU. + * If no counters are currently in use, then we have to take a + * mutex to ensure that we don't race with another task doing + * reserve_pmc_hardware or release_pmc_hardware. + */ + err = 0; + if (!atomic_inc_not_zero(&num_counters)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_read(&num_counters) == 0 && + reserve_pmc_hardware(perf_counter_interrupt)) + err = -EBUSY; + else + atomic_inc(&num_counters); + mutex_unlock(&pmc_reserve_mutex); + } + counter->destroy = hw_perf_counter_destroy; + + if (err) + return ERR_PTR(err); + return &power_pmu; +} + +/* + * A counter has overflowed; update its count and record + * things if requested. Note that interrupts are hard-disabled + * here so there is no possibility of being interrupted. + */ +static void record_and_restart(struct perf_counter *counter, long val, + struct pt_regs *regs, int nmi) +{ + u64 period = counter->hw.sample_period; + s64 prev, delta, left; + int record = 0; + u64 addr, mmcra, sdsync; + + /* we don't have to worry about interrupts here */ + prev = atomic64_read(&counter->hw.prev_count); + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &counter->count); + + /* + * See if the total period for this counter has expired, + * and update for the next period. + */ + val = 0; + left = atomic64_read(&counter->hw.period_left) - delta; + if (period) { + if (left <= 0) { + left += period; + if (left <= 0) + left = period; + record = 1; + } + if (left < 0x80000000L) + val = 0x80000000L - left; + } + + /* + * Finally record data if requested. + */ + if (record) { + struct perf_sample_data data = { + .regs = regs, + .addr = 0, + .period = counter->hw.last_period, + }; + + if (counter->attr.sample_type & PERF_SAMPLE_ADDR) { + /* + * The user wants a data address recorded. + * If we're not doing instruction sampling, + * give them the SDAR (sampled data address). + * If we are doing instruction sampling, then only + * give them the SDAR if it corresponds to the + * instruction pointed to by SIAR; this is indicated + * by the [POWER6_]MMCRA_SDSYNC bit in MMCRA. + */ + mmcra = regs->dsisr; + sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? + POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + data.addr = mfspr(SPRN_SDAR); + } + if (perf_counter_overflow(counter, nmi, &data)) { + /* + * Interrupts are coming too fast - throttle them + * by setting the counter to 0, so it will be + * at least 2^30 cycles until the next interrupt + * (assuming each counter counts at most 2 counts + * per cycle). + */ + val = 0; + left = ~0ULL >> 1; + } + } + + write_pmc(counter->hw.idx, val); + atomic64_set(&counter->hw.prev_count, val); + atomic64_set(&counter->hw.period_left, left); + perf_counter_update_userpage(counter); +} + +/* + * Called from generic code to get the misc flags (i.e. processor mode) + * for an event. + */ +unsigned long perf_misc_flags(struct pt_regs *regs) +{ + unsigned long mmcra; + + if (TRAP(regs) != 0xf00) { + /* not a PMU interrupt */ + return user_mode(regs) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; + } + + mmcra = regs->dsisr; + if (ppmu->flags & PPMU_ALT_SIPR) { + if (mmcra & POWER6_MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & POWER6_MMCRA_SIPR) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; + } + if (mmcra & MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; +} + +/* + * Called from generic code to get the instruction pointer + * for an event. + */ +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ + unsigned long mmcra; + unsigned long ip; + unsigned long slot; + + if (TRAP(regs) != 0xf00) + return regs->nip; /* not a PMU interrupt */ + + ip = mfspr(SPRN_SIAR); + mmcra = regs->dsisr; + if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { + slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; + if (slot > 1) + ip += 4 * (slot - 1); + } + return ip; +} + +/* + * Performance monitor interrupt stuff + */ +static void perf_counter_interrupt(struct pt_regs *regs) +{ + int i; + struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters); + struct perf_counter *counter; + long val; + int found = 0; + int nmi; + + if (cpuhw->n_limited) + freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5), + mfspr(SPRN_PMC6)); + + /* + * Overload regs->dsisr to store MMCRA so we only need to read it once. + */ + regs->dsisr = mfspr(SPRN_MMCRA); + + /* + * If interrupts were soft-disabled when this PMU interrupt + * occurred, treat it as an NMI. + */ + nmi = !regs->softe; + if (nmi) + nmi_enter(); + else + irq_enter(); + + for (i = 0; i < cpuhw->n_counters; ++i) { + counter = cpuhw->counter[i]; + if (!counter->hw.idx || is_limited_pmc(counter->hw.idx)) + continue; + val = read_pmc(counter->hw.idx); + if ((int)val < 0) { + /* counter has overflowed */ + found = 1; + record_and_restart(counter, val, regs, nmi); + } + } + + /* + * In case we didn't find and reset the counter that caused + * the interrupt, scan all counters and reset any that are + * negative, to avoid getting continual interrupts. + * Any that we processed in the previous loop will not be negative. + */ + if (!found) { + for (i = 0; i < ppmu->n_counter; ++i) { + if (is_limited_pmc(i + 1)) + continue; + val = read_pmc(i + 1); + if ((int)val < 0) + write_pmc(i + 1, 0); + } + } + + /* + * Reset MMCR0 to its normal value. This will set PMXE and + * clear FC (freeze counters) and PMAO (perf mon alert occurred) + * and thus allow interrupts to occur again. + * XXX might want to use MSR.PM to keep the counters frozen until + * we get back out of this interrupt. + */ + write_mmcr0(cpuhw, cpuhw->mmcr[0]); + + if (nmi) + nmi_exit(); + else + irq_exit(); +} + +void hw_perf_counter_setup(int cpu) +{ + struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu); + + memset(cpuhw, 0, sizeof(*cpuhw)); + cpuhw->mmcr[0] = MMCR0_FC; +} + +extern struct power_pmu power4_pmu; +extern struct power_pmu ppc970_pmu; +extern struct power_pmu power5_pmu; +extern struct power_pmu power5p_pmu; +extern struct power_pmu power6_pmu; +extern struct power_pmu power7_pmu; + +static int init_perf_counters(void) +{ + unsigned long pvr; + + /* XXX should get this from cputable */ + pvr = mfspr(SPRN_PVR); + switch (PVR_VER(pvr)) { + case PV_POWER4: + case PV_POWER4p: + ppmu = &power4_pmu; + break; + case PV_970: + case PV_970FX: + case PV_970MP: + ppmu = &ppc970_pmu; + break; + case PV_POWER5: + ppmu = &power5_pmu; + break; + case PV_POWER5p: + ppmu = &power5p_pmu; + break; + case 0x3e: + ppmu = &power6_pmu; + break; + case 0x3f: + ppmu = &power7_pmu; + break; + } + + /* + * Use FCHV to ignore kernel events if MSR.HV is set. + */ + if (mfmsr() & MSR_HV) + freeze_counters_kernel = MMCR0_FCHV; + + return 0; +} + +arch_initcall(init_perf_counters); diff --git a/trunk/arch/powerpc/kernel/power4-pmu.c b/trunk/arch/powerpc/kernel/power4-pmu.c new file mode 100644 index 000000000000..07bd308a5fa7 --- /dev/null +++ b/trunk/arch/powerpc/kernel/power4-pmu.c @@ -0,0 +1,598 @@ +/* + * Performance counter support for POWER4 (GP) and POWER4+ (GQ) processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +/* + * Bits in event code for POWER4 + */ +#define PM_PMC_SH 12 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_UNIT_SH 8 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_LOWER_SH 6 +#define PM_LOWER_MSK 1 +#define PM_LOWER_MSKS 0x40 +#define PM_BYTE_SH 4 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 3 +#define PM_PMCSEL_MSK 7 + +/* + * Unit code values + */ +#define PM_FPU 1 +#define PM_ISU1 2 +#define PM_IFU 3 +#define PM_IDU0 4 +#define PM_ISU1_ALT 6 +#define PM_ISU2 7 +#define PM_IFU_ALT 8 +#define PM_LSU0 9 +#define PM_LSU1 0xc +#define PM_GPS 0xf + +/* + * Bits in MMCR0 for POWER4 + */ +#define MMCR0_PMC1SEL_SH 8 +#define MMCR0_PMC2SEL_SH 1 +#define MMCR_PMCSEL_MSK 0x1f + +/* + * Bits in MMCR1 for POWER4 + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTC0SEL_SH 61 +#define MMCR1_TTM1SEL_SH 59 +#define MMCR1_TTC1SEL_SH 58 +#define MMCR1_TTM2SEL_SH 56 +#define MMCR1_TTC2SEL_SH 55 +#define MMCR1_TTM3SEL_SH 53 +#define MMCR1_TTC3SEL_SH 52 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 50 +#define MMCR1_TD_CP_DBG1SEL_SH 48 +#define MMCR1_TD_CP_DBG2SEL_SH 46 +#define MMCR1_TD_CP_DBG3SEL_SH 44 +#define MMCR1_DEBUG0SEL_SH 43 +#define MMCR1_DEBUG1SEL_SH 42 +#define MMCR1_DEBUG2SEL_SH 41 +#define MMCR1_DEBUG3SEL_SH 40 +#define MMCR1_PMC1_ADDER_SEL_SH 39 +#define MMCR1_PMC2_ADDER_SEL_SH 38 +#define MMCR1_PMC6_ADDER_SEL_SH 37 +#define MMCR1_PMC5_ADDER_SEL_SH 36 +#define MMCR1_PMC8_ADDER_SEL_SH 35 +#define MMCR1_PMC7_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC3SEL_SH 27 +#define MMCR1_PMC4SEL_SH 22 +#define MMCR1_PMC5SEL_SH 17 +#define MMCR1_PMC6SEL_SH 12 +#define MMCR1_PMC7SEL_SH 7 +#define MMCR1_PMC8SEL_SH 2 /* note bit 0 is in MMCRA for GP */ + +static short mmcr1_adder_bits[8] = { + MMCR1_PMC1_ADDER_SEL_SH, + MMCR1_PMC2_ADDER_SEL_SH, + MMCR1_PMC3_ADDER_SEL_SH, + MMCR1_PMC4_ADDER_SEL_SH, + MMCR1_PMC5_ADDER_SEL_SH, + MMCR1_PMC6_ADDER_SEL_SH, + MMCR1_PMC7_ADDER_SEL_SH, + MMCR1_PMC8_ADDER_SEL_SH +}; + +/* + * Bits in MMCRA + */ +#define MMCRA_PMC8SEL0_SH 17 /* PMC8SEL bit 0 for GP */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * |[ >[ >[ >|||[ >[ >< >< >< >< ><><><><><><><><> + * | UC1 UC2 UC3 ||| PS1 PS2 B0 B1 B2 B3 P1P2P3P4P5P6P7P8 + * \SMPL ||\TTC3SEL + * |\TTC_IFU_SEL + * \TTM2SEL0 + * + * SMPL - SAMPLE_ENABLE constraint + * 56: SAMPLE_ENABLE value 0x0100_0000_0000_0000 + * + * UC1 - unit constraint 1: can't have all three of FPU/ISU1/IDU0|ISU2 + * 55: UC1 error 0x0080_0000_0000_0000 + * 54: FPU events needed 0x0040_0000_0000_0000 + * 53: ISU1 events needed 0x0020_0000_0000_0000 + * 52: IDU0|ISU2 events needed 0x0010_0000_0000_0000 + * + * UC2 - unit constraint 2: can't have all three of FPU/IFU/LSU0 + * 51: UC2 error 0x0008_0000_0000_0000 + * 50: FPU events needed 0x0004_0000_0000_0000 + * 49: IFU events needed 0x0002_0000_0000_0000 + * 48: LSU0 events needed 0x0001_0000_0000_0000 + * + * UC3 - unit constraint 3: can't have all four of LSU0/IFU/IDU0|ISU2/ISU1 + * 47: UC3 error 0x8000_0000_0000 + * 46: LSU0 events needed 0x4000_0000_0000 + * 45: IFU events needed 0x2000_0000_0000 + * 44: IDU0|ISU2 events needed 0x1000_0000_0000 + * 43: ISU1 events needed 0x0800_0000_0000 + * + * TTM2SEL0 + * 42: 0 = IDU0 events needed + * 1 = ISU2 events needed 0x0400_0000_0000 + * + * TTC_IFU_SEL + * 41: 0 = IFU.U events needed + * 1 = IFU.L events needed 0x0200_0000_0000 + * + * TTC3SEL + * 40: 0 = LSU1.U events needed + * 1 = LSU1.L events needed 0x0100_0000_0000 + * + * PS1 + * 39: PS1 error 0x0080_0000_0000 + * 36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000 + * + * PS2 + * 35: PS2 error 0x0008_0000_0000 + * 32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000 + * + * B0 + * 28-31: Byte 0 event source 0xf000_0000 + * 1 = FPU + * 2 = ISU1 + * 3 = IFU + * 4 = IDU0 + * 7 = ISU2 + * 9 = LSU0 + * c = LSU1 + * f = GPS + * + * B1, B2, B3 + * 24-27, 20-23, 16-19: Byte 1, 2, 3 event sources + * + * P8 + * 15: P8 error 0x8000 + * 14-15: Count of events needing PMC8 + * + * P1..P7 + * 0-13: Count of events needing PMC1..PMC7 + * + * Note: this doesn't allow events using IFU.U to be combined with events + * using IFU.L, though that is feasible (using TTM0 and TTM2). However + * there are no listed events for IFU.L (they are debug events not + * verified for performance monitoring) so this shouldn't cause a + * problem. + */ + +static struct unitinfo { + u64 value, mask; + int unit; + int lowerbit; +} p4_unitinfo[16] = { + [PM_FPU] = { 0x44000000000000ull, 0x88000000000000ull, PM_FPU, 0 }, + [PM_ISU1] = { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 }, + [PM_ISU1_ALT] = + { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 }, + [PM_IFU] = { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 }, + [PM_IFU_ALT] = + { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 }, + [PM_IDU0] = { 0x10100000000000ull, 0x80840000000000ull, PM_IDU0, 1 }, + [PM_ISU2] = { 0x10140000000000ull, 0x80840000000000ull, PM_ISU2, 0 }, + [PM_LSU0] = { 0x01400000000000ull, 0x08800000000000ull, PM_LSU0, 0 }, + [PM_LSU1] = { 0x00000000000000ull, 0x00010000000000ull, PM_LSU1, 40 }, + [PM_GPS] = { 0x00000000000000ull, 0x00000000000000ull, PM_GPS, 0 } +}; + +static unsigned char direct_marked_event[8] = { + (1<<2) | (1<<3), /* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */ + (1<<3) | (1<<5), /* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */ + (1<<3), /* PMC3: PM_MRK_ST_CMPL_INT */ + (1<<4) | (1<<5), /* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */ + (1<<4) | (1<<5), /* PMC5: PM_MRK_GRP_TIMEO */ + (1<<3) | (1<<4) | (1<<5), + /* PMC6: PM_MRK_ST_GPS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */ + (1<<4) | (1<<5), /* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */ + (1<<4), /* PMC8: PM_MRK_LSU_FIN */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int p4_marked_instr_event(u64 event) +{ + int pmc, psel, unit, byte, bit; + unsigned int mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc) { + if (direct_marked_event[pmc - 1] & (1 << psel)) + return 1; + if (psel == 0) /* add events */ + bit = (pmc <= 4)? pmc - 1: 8 - pmc; + else if (psel == 6) /* decode events */ + bit = 4; + else + return 0; + } else + bit = psel; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + mask = 0; + switch (unit) { + case PM_LSU1: + if (event & PM_LOWER_MSKS) + mask = 1 << 28; /* byte 7 bit 4 */ + else + mask = 6 << 24; /* byte 3 bits 1 and 2 */ + break; + case PM_LSU0: + /* byte 3, bit 3; byte 2 bits 0,2,3,4,5; byte 1 */ + mask = 0x083dff00; + } + return (mask >> (byte * 8 + bit)) & 1; +} + +static int p4_get_constraint(u64 event, u64 *maskp, u64 *valp) +{ + int pmc, byte, unit, lower, sh; + u64 mask = 0, value = 0; + int grp = -1; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 8) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + grp = ((pmc - 1) >> 1) & 1; + } + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit) { + lower = (event >> PM_LOWER_SH) & PM_LOWER_MSK; + + /* + * Bus events on bytes 0 and 2 can be counted + * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8. + */ + if (!pmc) + grp = byte & 1; + + if (!p4_unitinfo[unit].unit) + return -1; + mask |= p4_unitinfo[unit].mask; + value |= p4_unitinfo[unit].value; + sh = p4_unitinfo[unit].lowerbit; + if (sh > 1) + value |= (u64)lower << sh; + else if (lower != sh) + return -1; + unit = p4_unitinfo[unit].unit; + + /* Set byte lane select field */ + mask |= 0xfULL << (28 - 4 * byte); + value |= (u64)unit << (28 - 4 * byte); + } + if (grp == 0) { + /* increment PMC1/2/5/6 field */ + mask |= 0x8000000000ull; + value |= 0x1000000000ull; + } else { + /* increment PMC3/4/7/8 field */ + mask |= 0x800000000ull; + value |= 0x100000000ull; + } + + /* Marked instruction events need sample_enable set */ + if (p4_marked_instr_event(event)) { + mask |= 1ull << 56; + value |= 1ull << 56; + } + + /* PMCSEL=6 decode events on byte 2 need sample_enable clear */ + if (pmc && (event & PM_PMCSEL_MSK) == 6 && byte == 2) + mask |= 1ull << 56; + + *maskp = mask; + *valp = value; + return 0; +} + +static unsigned int ppc_inst_cmpl[] = { + 0x1001, 0x4001, 0x6001, 0x7001, 0x8001 +}; + +static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, na; + + alt[0] = event; + na = 1; + + /* 2 possibilities for PM_GRP_DISP_REJECT */ + if (event == 0x8003 || event == 0x0224) { + alt[1] = event ^ (0x8003 ^ 0x0224); + return 2; + } + + /* 2 possibilities for PM_ST_MISS_L1 */ + if (event == 0x0c13 || event == 0x0c23) { + alt[1] = event ^ (0x0c13 ^ 0x0c23); + return 2; + } + + /* several possibilities for PM_INST_CMPL */ + for (i = 0; i < ARRAY_SIZE(ppc_inst_cmpl); ++i) { + if (event == ppc_inst_cmpl[i]) { + for (j = 0; j < ARRAY_SIZE(ppc_inst_cmpl); ++j) + if (j != i) + alt[na++] = ppc_inst_cmpl[j]; + break; + } + } + + return na; +} + +static int p4_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], u64 mmcr[]) +{ + u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0; + unsigned int pmc, unit, byte, psel, lower; + unsigned int ttm, grp; + unsigned int pmc_inuse = 0; + unsigned int pmc_grp_use[2]; + unsigned char busbyte[4]; + unsigned char unituse[16]; + unsigned int unitlower = 0; + int i; + + if (n_ev > 8) + return -1; + + /* First pass to count resource use */ + pmc_grp_use[0] = pmc_grp_use[1] = 0; + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + /* count 1/2/5/6 vs 3/4/7/8 use */ + ++pmc_grp_use[((pmc - 1) >> 1) & 1]; + } + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + lower = (event[i] >> PM_LOWER_SH) & PM_LOWER_MSK; + if (unit) { + if (!pmc) + ++pmc_grp_use[byte & 1]; + if (unit == 6 || unit == 8) + /* map alt ISU1/IFU codes: 6->2, 8->3 */ + unit = (unit >> 1) - 1; + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + lower <<= unit; + if (unituse[unit] && lower != (unitlower & lower)) + return -1; + unituse[unit] = 1; + unitlower |= lower; + } + } + if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4) + return -1; + + /* + * Assign resources and set multiplexer selects. + * + * Units 1,2,3 are on TTM0, 4,6,7 on TTM1, 8,10 on TTM2. + * Each TTMx can only select one unit, but since + * units 2 and 6 are both ISU1, and 3 and 8 are both IFU, + * we have some choices. + */ + if (unituse[2] & (unituse[1] | (unituse[3] & unituse[9]))) { + unituse[6] = 1; /* Move 2 to 6 */ + unituse[2] = 0; + } + if (unituse[3] & (unituse[1] | unituse[2])) { + unituse[8] = 1; /* Move 3 to 8 */ + unituse[3] = 0; + unitlower = (unitlower & ~8) | ((unitlower & 8) << 5); + } + /* Check only one unit per TTMx */ + if (unituse[1] + unituse[2] + unituse[3] > 1 || + unituse[4] + unituse[6] + unituse[7] > 1 || + unituse[8] + unituse[9] > 1 || + (unituse[5] | unituse[10] | unituse[11] | + unituse[13] | unituse[14])) + return -1; + + /* Set TTMxSEL fields. Note, units 1-3 => TTM0SEL codes 0-2 */ + mmcr1 |= (u64)(unituse[3] * 2 + unituse[2]) << MMCR1_TTM0SEL_SH; + mmcr1 |= (u64)(unituse[7] * 3 + unituse[6] * 2) << MMCR1_TTM1SEL_SH; + mmcr1 |= (u64)unituse[9] << MMCR1_TTM2SEL_SH; + + /* Set TTCxSEL fields. */ + if (unitlower & 0xe) + mmcr1 |= 1ull << MMCR1_TTC0SEL_SH; + if (unitlower & 0xf0) + mmcr1 |= 1ull << MMCR1_TTC1SEL_SH; + if (unitlower & 0xf00) + mmcr1 |= 1ull << MMCR1_TTC2SEL_SH; + if (unitlower & 0x7000) + mmcr1 |= 1ull << MMCR1_TTC3SEL_SH; + + /* Set byte lane select fields. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit == 0xf) { + /* special case for GPS */ + mmcr1 |= 1ull << (MMCR1_DEBUG0SEL_SH - byte); + } else { + if (!unituse[unit]) + ttm = unit - 1; /* 2->1, 3->2 */ + else + ttm = unit >> 2; + mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2*byte); + } + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + if (!pmc) { + /* Bus event or 00xxx direct event (off or cycles) */ + if (unit) + psel |= 0x10 | ((byte & 2) << 2); + for (pmc = 0; pmc < 8; ++pmc) { + if (pmc_inuse & (1 << pmc)) + continue; + grp = (pmc >> 1) & 1; + if (unit) { + if (grp == (byte & 1)) + break; + } else if (pmc_grp_use[grp] < 4) { + ++pmc_grp_use[grp]; + break; + } + } + pmc_inuse |= 1 << pmc; + } else { + /* Direct event */ + --pmc; + if (psel == 0 && (byte & 2)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ull << mmcr1_adder_bits[pmc]; + else if (psel == 6 && byte == 3) + /* seem to need to set sample_enable here */ + mmcra |= MMCRA_SAMPLE_ENABLE; + psel |= 8; + } + if (pmc <= 1) + mmcr0 |= psel << (MMCR0_PMC1SEL_SH - 7 * pmc); + else + mmcr1 |= psel << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)); + if (pmc == 7) /* PMC8 */ + mmcra |= (psel & 1) << MMCRA_PMC8SEL0_SH; + hwc[i] = pmc; + if (p4_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + } + + if (pmc_inuse & 1) + mmcr0 |= MMCR0_PMC1CE; + if (pmc_inuse & 0xfe) + mmcr0 |= MMCR0_PMCjCE; + + mmcra |= 0x2000; /* mark only one IOP per PPC instruction */ + + /* Return MMCRx values */ + mmcr[0] = mmcr0; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void p4_disable_pmc(unsigned int pmc, u64 mmcr[]) +{ + /* + * Setting the PMCxSEL field to 0 disables PMC x. + * (Note that pmc is 0-based here, not 1-based.) + */ + if (pmc <= 1) { + mmcr[0] &= ~(0x1fUL << (MMCR0_PMC1SEL_SH - 7 * pmc)); + } else { + mmcr[1] &= ~(0x1fUL << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2))); + if (pmc == 7) + mmcr[2] &= ~(1UL << MMCRA_PMC8SEL0_SH); + } +} + +static int p4_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 7, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x1001, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x8c10, /* PM_LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3c10, /* PM_LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x330, /* PM_BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x331, /* PM_BR_MPRED_CR */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x8c10, 0x3c10 }, + [C(OP_WRITE)] = { 0x7c10, 0xc13 }, + [C(OP_PREFETCH)] = { 0xc35, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0xc34, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x904 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x900 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x330, 0x331 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu power4_pmu = { + .n_counter = 8, + .max_alternatives = 5, + .add_fields = 0x0000001100005555ull, + .test_adder = 0x0011083300000000ull, + .compute_mmcr = p4_compute_mmcr, + .get_constraint = p4_get_constraint, + .get_alternatives = p4_get_alternatives, + .disable_pmc = p4_disable_pmc, + .n_generic = ARRAY_SIZE(p4_generic_events), + .generic_events = p4_generic_events, + .cache_events = &power4_cache_events, +}; diff --git a/trunk/arch/powerpc/kernel/power5+-pmu.c b/trunk/arch/powerpc/kernel/power5+-pmu.c new file mode 100644 index 000000000000..41e5d2d958d4 --- /dev/null +++ b/trunk/arch/powerpc/kernel/power5+-pmu.c @@ -0,0 +1,671 @@ +/* + * Performance counter support for POWER5+/++ (not POWER5) processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +/* + * Bits in event code for POWER5+ (POWER5 GS) and POWER5++ (POWER5 GS DD3) + */ +#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 16 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_BYTE_SH 12 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 7 +#define PM_GRS_SH 8 /* Storage subsystem mux select */ +#define PM_GRS_MSK 7 +#define PM_BUSEVENT_MSK 0x80 /* Set if event uses event bus */ +#define PM_PMCSEL_MSK 0x7f + +/* Values in PM_UNIT field */ +#define PM_FPU 0 +#define PM_ISU0 1 +#define PM_IFU 2 +#define PM_ISU1 3 +#define PM_IDU 4 +#define PM_ISU0_ALT 6 +#define PM_GRS 7 +#define PM_LSU0 8 +#define PM_LSU1 0xc +#define PM_LASTUNIT 0xc + +/* + * Bits in MMCR1 for POWER5+ + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTM1SEL_SH 60 +#define MMCR1_TTM2SEL_SH 58 +#define MMCR1_TTM3SEL_SH 56 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 54 +#define MMCR1_TD_CP_DBG1SEL_SH 52 +#define MMCR1_TD_CP_DBG2SEL_SH 50 +#define MMCR1_TD_CP_DBG3SEL_SH 48 +#define MMCR1_GRS_L2SEL_SH 46 +#define MMCR1_GRS_L2SEL_MSK 3 +#define MMCR1_GRS_L3SEL_SH 44 +#define MMCR1_GRS_L3SEL_MSK 3 +#define MMCR1_GRS_MCSEL_SH 41 +#define MMCR1_GRS_MCSEL_MSK 7 +#define MMCR1_GRS_FABSEL_SH 39 +#define MMCR1_GRS_FABSEL_MSK 3 +#define MMCR1_PMC1_ADDER_SEL_SH 35 +#define MMCR1_PMC2_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC1SEL_SH 25 +#define MMCR1_PMC2SEL_SH 17 +#define MMCR1_PMC3SEL_SH 9 +#define MMCR1_PMC4SEL_SH 1 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0x7f + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * [ ><><>< ><> <><>[ > < >< >< >< ><><><><><><> + * NC G0G1G2 G3 T0T1 UC B0 B1 B2 B3 P6P5P4P3P2P1 + * + * NC - number of counters + * 51: NC error 0x0008_0000_0000_0000 + * 48-50: number of events needing PMC1-4 0x0007_0000_0000_0000 + * + * G0..G3 - GRS mux constraints + * 46-47: GRS_L2SEL value + * 44-45: GRS_L3SEL value + * 41-44: GRS_MCSEL value + * 39-40: GRS_FABSEL value + * Note that these match up with their bit positions in MMCR1 + * + * T0 - TTM0 constraint + * 36-37: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0x30_0000_0000 + * + * T1 - TTM1 constraint + * 34-35: TTM1SEL value (0=IDU, 3=GRS) 0x0c_0000_0000 + * + * UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS + * 33: UC3 error 0x02_0000_0000 + * 32: FPU|IFU|ISU1 events needed 0x01_0000_0000 + * 31: ISU0 events needed 0x01_8000_0000 + * 30: IDU|GRS events needed 0x00_4000_0000 + * + * B0 + * 24-27: Byte 0 event source 0x0f00_0000 + * Encoding as for the event code + * + * B1, B2, B3 + * 20-23, 16-19, 12-15: Byte 1, 2, 3 event sources + * + * P6 + * 11: P6 error 0x800 + * 10-11: Count of events needing PMC6 + * + * P1..P5 + * 0-9: Count of events needing PMC1..PMC5 + */ + +static const int grsel_shift[8] = { + MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, + MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, + MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH +}; + +/* Masks and values for using events from the various units */ +static u64 unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0x3200000000ull, 0x0100000000ull }, + [PM_ISU0] = { 0x0200000000ull, 0x0080000000ull }, + [PM_ISU1] = { 0x3200000000ull, 0x3100000000ull }, + [PM_IFU] = { 0x3200000000ull, 0x2100000000ull }, + [PM_IDU] = { 0x0e00000000ull, 0x0040000000ull }, + [PM_GRS] = { 0x0e00000000ull, 0x0c40000000ull }, +}; + +static int power5p_get_constraint(u64 event, u64 *maskp, u64 *valp) +{ + int pmc, byte, unit, sh; + int bit, fmask; + u64 mask = 0, value = 0; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + if (pmc >= 5 && !(event == 0x500009 || event == 0x600005)) + return -1; + } + if (event & PM_BUSEVENT_MSK) { + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + mask |= unit_cons[unit][0]; + value |= unit_cons[unit][1]; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + /* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */ + ++unit; + byte &= 3; + } + if (unit == PM_GRS) { + bit = event & 7; + fmask = (bit == 6)? 7: 3; + sh = grsel_shift[bit]; + mask |= (u64)fmask << sh; + value |= (u64)((event >> PM_GRS_SH) & fmask) << sh; + } + /* Set byte lane select field */ + mask |= 0xfULL << (24 - 4 * byte); + value |= (u64)unit << (24 - 4 * byte); + } + if (pmc < 5) { + /* need a counter from PMC1-4 set */ + mask |= 0x8000000000000ull; + value |= 0x1000000000000ull; + } + *maskp = mask; + *valp = value; + return 0; +} + +static int power5p_limited_pmc_event(u64 event) +{ + int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + + return pmc == 5 || pmc == 6; +} + +#define MAX_ALT 3 /* at most 3 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x100c0, 0x40001f }, /* PM_GCT_FULL_CYC */ + { 0x120e4, 0x400002 }, /* PM_GRP_DISP_REJECT */ + { 0x230e2, 0x323087 }, /* PM_BR_PRED_CR */ + { 0x230e3, 0x223087, 0x3230a0 }, /* PM_BR_PRED_TA */ + { 0x410c7, 0x441084 }, /* PM_THRD_L2MISS_BOTH_CYC */ + { 0x800c4, 0xc20e0 }, /* PM_DTLB_MISS */ + { 0xc50c6, 0xc60e0 }, /* PM_MRK_DTLB_MISS */ + { 0x100005, 0x600005 }, /* PM_RUN_CYC */ + { 0x100009, 0x200009 }, /* PM_INST_CMPL */ + { 0x200015, 0x300015 }, /* PM_LSU_LMQ_SRQ_EMPTY_CYC */ + { 0x300009, 0x400009 }, /* PM_INST_DISP */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(unsigned int event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static const unsigned char bytedecode_alternatives[4][4] = { + /* PMC 1 */ { 0x21, 0x23, 0x25, 0x27 }, + /* PMC 2 */ { 0x07, 0x17, 0x0e, 0x1e }, + /* PMC 3 */ { 0x20, 0x22, 0x24, 0x26 }, + /* PMC 4 */ { 0x07, 0x17, 0x0e, 0x1e } +}; + +/* + * Some direct events for decodes of event bus byte 3 have alternative + * PMCSEL values on other counters. This returns the alternative + * event code for those that do, or -1 otherwise. This also handles + * alternative PCMSEL values for add events. + */ +static s64 find_alternative_bdecode(u64 event) +{ + int pmc, altpmc, pp, j; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc == 0 || pmc > 4) + return -1; + altpmc = 5 - pmc; /* 1 <-> 4, 2 <-> 3 */ + pp = event & PM_PMCSEL_MSK; + for (j = 0; j < 4; ++j) { + if (bytedecode_alternatives[pmc - 1][j] == pp) { + return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) | + (altpmc << PM_PMC_SH) | + bytedecode_alternatives[altpmc - 1][j]; + } + } + + /* new decode alternatives for power5+ */ + if (pmc == 1 && (pp == 0x0d || pp == 0x0e)) + return event + (2 << PM_PMC_SH) + (0x2e - 0x0d); + if (pmc == 3 && (pp == 0x2e || pp == 0x2f)) + return event - (2 << PM_PMC_SH) - (0x2e - 0x0d); + + /* alternative add event encodings */ + if (pp == 0x10 || pp == 0x28) + return ((event ^ (0x10 ^ 0x28)) & ~PM_PMC_MSKS) | + (altpmc << PM_PMC_SH); + + return -1; +} + +static int power5p_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + int nlim; + s64 ae; + + alt[0] = event; + nalt = 1; + nlim = power5p_limited_pmc_event(event); + i = find_alternative(event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != event) + alt[nalt++] = ae; + nlim += power5p_limited_pmc_event(ae); + } + } else { + ae = find_alternative_bdecode(event); + if (ae > 0) + alt[nalt++] = ae; + } + + if (flags & PPMU_ONLY_COUNT_RUN) { + /* + * We're only counting in RUN state, + * so PM_CYC is equivalent to PM_RUN_CYC + * and PM_INST_CMPL === PM_RUN_INST_CMPL. + * This doesn't include alternatives that don't provide + * any extra flexibility in assigning PMCs (e.g. + * 0x100005 for PM_RUN_CYC vs. 0xf for PM_CYC). + * Note that even with these additional alternatives + * we never end up with more than 3 alternatives for any event. + */ + j = nalt; + for (i = 0; i < nalt; ++i) { + switch (alt[i]) { + case 0xf: /* PM_CYC */ + alt[j++] = 0x600005; /* PM_RUN_CYC */ + ++nlim; + break; + case 0x600005: /* PM_RUN_CYC */ + alt[j++] = 0xf; + break; + case 0x100009: /* PM_INST_CMPL */ + alt[j++] = 0x500009; /* PM_RUN_INST_CMPL */ + ++nlim; + break; + case 0x500009: /* PM_RUN_INST_CMPL */ + alt[j++] = 0x100009; /* PM_INST_CMPL */ + alt[j++] = 0x200009; + break; + } + } + nalt = j; + } + + if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) { + /* remove the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (!power5p_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) { + /* remove all but the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (power5p_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } + + return nalt; +} + +/* + * Map of which direct events on which PMCs are marked instruction events. + * Indexed by PMCSEL value, bit i (LE) set if PMC i is a marked event. + * Bit 0 is set if it is marked for all PMCs. + * The 0x80 bit indicates a byte decode PMCSEL value. + */ +static unsigned char direct_event_is_marked[0x28] = { + 0, /* 00 */ + 0x1f, /* 01 PM_IOPS_CMPL */ + 0x2, /* 02 PM_MRK_GRP_DISP */ + 0xe, /* 03 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */ + 0, /* 04 */ + 0x1c, /* 05 PM_MRK_BRU_FIN, PM_MRK_INST_FIN, PM_MRK_CRU_FIN */ + 0x80, /* 06 */ + 0x80, /* 07 */ + 0, 0, 0,/* 08 - 0a */ + 0x18, /* 0b PM_THRESH_TIMEO, PM_MRK_GRP_TIMEO */ + 0, /* 0c */ + 0x80, /* 0d */ + 0x80, /* 0e */ + 0, /* 0f */ + 0, /* 10 */ + 0x14, /* 11 PM_MRK_GRP_BR_REDIR, PM_MRK_GRP_IC_MISS */ + 0, /* 12 */ + 0x10, /* 13 PM_MRK_GRP_CMPL */ + 0x1f, /* 14 PM_GRP_MRK, PM_MRK_{FXU,FPU,LSU}_FIN */ + 0x2, /* 15 PM_MRK_GRP_ISSUED */ + 0x80, /* 16 */ + 0x80, /* 17 */ + 0, 0, 0, 0, 0, + 0x80, /* 1d */ + 0x80, /* 1e */ + 0, /* 1f */ + 0x80, /* 20 */ + 0x80, /* 21 */ + 0x80, /* 22 */ + 0x80, /* 23 */ + 0x80, /* 24 */ + 0x80, /* 25 */ + 0x80, /* 26 */ + 0x80, /* 27 */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power5p_marked_instr_event(u64 event) +{ + int pmc, psel; + int bit, byte, unit; + u32 mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc >= 5) + return 0; + + bit = -1; + if (psel < sizeof(direct_event_is_marked)) { + if (direct_event_is_marked[psel] & (1 << pmc)) + return 1; + if (direct_event_is_marked[psel] & 0x80) + bit = 4; + else if (psel == 0x08) + bit = pmc - 1; + else if (psel == 0x10) + bit = 4 - pmc; + else if (psel == 0x1b && (pmc == 1 || pmc == 3)) + bit = 4; + } else if ((psel & 0x48) == 0x40) { + bit = psel & 7; + } else if (psel == 0x28) { + bit = pmc - 1; + } else if (pmc == 3 && (psel == 0x2e || psel == 0x2f)) { + bit = 4; + } + + if (!(event & PM_BUSEVENT_MSK) || bit == -1) + return 0; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit == PM_LSU0) { + /* byte 1 bits 0-7, byte 2 bits 0,2-4,6 */ + mask = 0x5dff00; + } else if (unit == PM_LSU1 && byte >= 4) { + byte -= 4; + /* byte 5 bits 6-7, byte 6 bits 0,4, byte 7 bits 0-4,6 */ + mask = 0x5f11c000; + } else + return 0; + + return (mask >> (byte * 8 + bit)) & 1; +} + +static int power5p_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], u64 mmcr[]) +{ + u64 mmcr1 = 0; + u64 mmcra = 0; + unsigned int pmc, unit, byte, psel; + unsigned int ttm; + int i, isbus, bit, grsel; + unsigned int pmc_inuse = 0; + unsigned char busbyte[4]; + unsigned char unituse[16]; + int ttmuse; + + if (n_ev > 6) + return -1; + + /* First pass to count resource use */ + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + } + if (event[i] & PM_BUSEVENT_MSK) { + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + ++unit; + byte &= 3; + } + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + unituse[unit] = 1; + } + } + + /* + * Assign resources and set multiplexer selects. + * + * PM_ISU0 can go either on TTM0 or TTM1, but that's the only + * choice we have to deal with. + */ + if (unituse[PM_ISU0] & + (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) { + unituse[PM_ISU0_ALT] = 1; /* move ISU to TTM1 */ + unituse[PM_ISU0] = 0; + } + /* Set TTM[01]SEL fields. */ + ttmuse = 0; + for (i = PM_FPU; i <= PM_ISU1; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH; + } + ttmuse = 0; + for (; i <= PM_GRS; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH; + } + if (ttmuse > 1) + return -1; + + /* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) { + /* get ISU0 through TTM1 rather than TTM0 */ + unit = PM_ISU0_ALT; + } else if (unit == PM_LSU1 + 1) { + /* select lower word of LSU1 for this byte */ + mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte); + } + ttm = unit >> 2; + mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + isbus = event[i] & PM_BUSEVENT_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + for (pmc = 0; pmc < 4; ++pmc) { + if (!(pmc_inuse & (1 << pmc))) + break; + } + if (pmc >= 4) + return -1; + pmc_inuse |= 1 << pmc; + } else if (pmc <= 4) { + /* Direct event */ + --pmc; + if (isbus && (byte & 2) && + (psel == 8 || psel == 0x10 || psel == 0x28)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc); + } else { + /* Instructions or run cycles on PMC5/6 */ + --pmc; + } + if (isbus && unit == PM_GRS) { + bit = psel & 7; + grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK; + mmcr1 |= (u64)grsel << grsel_shift[bit]; + } + if (power5p_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + if ((psel & 0x58) == 0x40 && (byte & 1) != ((pmc >> 1) & 1)) + /* select alternate byte lane */ + psel |= 0x10; + if (pmc <= 3) + mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc); + hwc[i] = pmc; + } + + /* Return MMCRx values */ + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void power5p_disable_pmc(unsigned int pmc, u64 mmcr[]) +{ + if (pmc <= 3) + mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power5p_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0xf, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x100009, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x1c10a8, /* LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3c1088, /* LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x230e4, /* BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x230e5, /* BR_MPRED_CR */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x1c10a8, 0x3c1088 }, + [C(OP_WRITE)] = { 0x2c10a8, 0xc10c3 }, + [C(OP_PREFETCH)] = { 0xc70e7, -1 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0xc50c3, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0xc20e4, 0x800c4 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x800c0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x230e4, 0x230e5 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu power5p_pmu = { + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x7000000000055ull, + .test_adder = 0x3000040000000ull, + .compute_mmcr = power5p_compute_mmcr, + .get_constraint = power5p_get_constraint, + .get_alternatives = power5p_get_alternatives, + .disable_pmc = power5p_disable_pmc, + .limited_pmc_event = power5p_limited_pmc_event, + .flags = PPMU_LIMITED_PMC5_6, + .n_generic = ARRAY_SIZE(power5p_generic_events), + .generic_events = power5p_generic_events, + .cache_events = &power5p_cache_events, +}; diff --git a/trunk/arch/powerpc/kernel/power5-pmu.c b/trunk/arch/powerpc/kernel/power5-pmu.c new file mode 100644 index 000000000000..05600b66221a --- /dev/null +++ b/trunk/arch/powerpc/kernel/power5-pmu.c @@ -0,0 +1,611 @@ +/* + * Performance counter support for POWER5 (not POWER5++) processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +/* + * Bits in event code for POWER5 (not POWER5++) + */ +#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 16 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_BYTE_SH 12 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 7 +#define PM_GRS_SH 8 /* Storage subsystem mux select */ +#define PM_GRS_MSK 7 +#define PM_BUSEVENT_MSK 0x80 /* Set if event uses event bus */ +#define PM_PMCSEL_MSK 0x7f + +/* Values in PM_UNIT field */ +#define PM_FPU 0 +#define PM_ISU0 1 +#define PM_IFU 2 +#define PM_ISU1 3 +#define PM_IDU 4 +#define PM_ISU0_ALT 6 +#define PM_GRS 7 +#define PM_LSU0 8 +#define PM_LSU1 0xc +#define PM_LASTUNIT 0xc + +/* + * Bits in MMCR1 for POWER5 + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTM1SEL_SH 60 +#define MMCR1_TTM2SEL_SH 58 +#define MMCR1_TTM3SEL_SH 56 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 54 +#define MMCR1_TD_CP_DBG1SEL_SH 52 +#define MMCR1_TD_CP_DBG2SEL_SH 50 +#define MMCR1_TD_CP_DBG3SEL_SH 48 +#define MMCR1_GRS_L2SEL_SH 46 +#define MMCR1_GRS_L2SEL_MSK 3 +#define MMCR1_GRS_L3SEL_SH 44 +#define MMCR1_GRS_L3SEL_MSK 3 +#define MMCR1_GRS_MCSEL_SH 41 +#define MMCR1_GRS_MCSEL_MSK 7 +#define MMCR1_GRS_FABSEL_SH 39 +#define MMCR1_GRS_FABSEL_MSK 3 +#define MMCR1_PMC1_ADDER_SEL_SH 35 +#define MMCR1_PMC2_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC1SEL_SH 25 +#define MMCR1_PMC2SEL_SH 17 +#define MMCR1_PMC3SEL_SH 9 +#define MMCR1_PMC4SEL_SH 1 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0x7f + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * <><>[ ><><>< ><> [ >[ >[ >< >< >< >< ><><><><><><> + * T0T1 NC G0G1G2 G3 UC PS1PS2 B0 B1 B2 B3 P6P5P4P3P2P1 + * + * T0 - TTM0 constraint + * 54-55: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0xc0_0000_0000_0000 + * + * T1 - TTM1 constraint + * 52-53: TTM1SEL value (0=IDU, 3=GRS) 0x30_0000_0000_0000 + * + * NC - number of counters + * 51: NC error 0x0008_0000_0000_0000 + * 48-50: number of events needing PMC1-4 0x0007_0000_0000_0000 + * + * G0..G3 - GRS mux constraints + * 46-47: GRS_L2SEL value + * 44-45: GRS_L3SEL value + * 41-44: GRS_MCSEL value + * 39-40: GRS_FABSEL value + * Note that these match up with their bit positions in MMCR1 + * + * UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS + * 37: UC3 error 0x20_0000_0000 + * 36: FPU|IFU|ISU1 events needed 0x10_0000_0000 + * 35: ISU0 events needed 0x08_0000_0000 + * 34: IDU|GRS events needed 0x04_0000_0000 + * + * PS1 + * 33: PS1 error 0x2_0000_0000 + * 31-32: count of events needing PMC1/2 0x1_8000_0000 + * + * PS2 + * 30: PS2 error 0x4000_0000 + * 28-29: count of events needing PMC3/4 0x3000_0000 + * + * B0 + * 24-27: Byte 0 event source 0x0f00_0000 + * Encoding as for the event code + * + * B1, B2, B3 + * 20-23, 16-19, 12-15: Byte 1, 2, 3 event sources + * + * P1..P6 + * 0-11: Count of events needing PMC1..PMC6 + */ + +static const int grsel_shift[8] = { + MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, + MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, + MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH +}; + +/* Masks and values for using events from the various units */ +static u64 unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0xc0002000000000ull, 0x00001000000000ull }, + [PM_ISU0] = { 0x00002000000000ull, 0x00000800000000ull }, + [PM_ISU1] = { 0xc0002000000000ull, 0xc0001000000000ull }, + [PM_IFU] = { 0xc0002000000000ull, 0x80001000000000ull }, + [PM_IDU] = { 0x30002000000000ull, 0x00000400000000ull }, + [PM_GRS] = { 0x30002000000000ull, 0x30000400000000ull }, +}; + +static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp) +{ + int pmc, byte, unit, sh; + int bit, fmask; + u64 mask = 0, value = 0; + int grp = -1; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + if (pmc <= 4) + grp = (pmc - 1) >> 1; + else if (event != 0x500009 && event != 0x600005) + return -1; + } + if (event & PM_BUSEVENT_MSK) { + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + mask |= unit_cons[unit][0]; + value |= unit_cons[unit][1]; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + /* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */ + ++unit; + byte &= 3; + } + if (unit == PM_GRS) { + bit = event & 7; + fmask = (bit == 6)? 7: 3; + sh = grsel_shift[bit]; + mask |= (u64)fmask << sh; + value |= (u64)((event >> PM_GRS_SH) & fmask) << sh; + } + /* + * Bus events on bytes 0 and 2 can be counted + * on PMC1/2; bytes 1 and 3 on PMC3/4. + */ + if (!pmc) + grp = byte & 1; + /* Set byte lane select field */ + mask |= 0xfULL << (24 - 4 * byte); + value |= (u64)unit << (24 - 4 * byte); + } + if (grp == 0) { + /* increment PMC1/2 field */ + mask |= 0x200000000ull; + value |= 0x080000000ull; + } else if (grp == 1) { + /* increment PMC3/4 field */ + mask |= 0x40000000ull; + value |= 0x10000000ull; + } + if (pmc < 5) { + /* need a counter from PMC1-4 set */ + mask |= 0x8000000000000ull; + value |= 0x1000000000000ull; + } + *maskp = mask; + *valp = value; + return 0; +} + +#define MAX_ALT 3 /* at most 3 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x120e4, 0x400002 }, /* PM_GRP_DISP_REJECT */ + { 0x410c7, 0x441084 }, /* PM_THRD_L2MISS_BOTH_CYC */ + { 0x100005, 0x600005 }, /* PM_RUN_CYC */ + { 0x100009, 0x200009, 0x500009 }, /* PM_INST_CMPL */ + { 0x300009, 0x400009 }, /* PM_INST_DISP */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(u64 event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static const unsigned char bytedecode_alternatives[4][4] = { + /* PMC 1 */ { 0x21, 0x23, 0x25, 0x27 }, + /* PMC 2 */ { 0x07, 0x17, 0x0e, 0x1e }, + /* PMC 3 */ { 0x20, 0x22, 0x24, 0x26 }, + /* PMC 4 */ { 0x07, 0x17, 0x0e, 0x1e } +}; + +/* + * Some direct events for decodes of event bus byte 3 have alternative + * PMCSEL values on other counters. This returns the alternative + * event code for those that do, or -1 otherwise. + */ +static s64 find_alternative_bdecode(u64 event) +{ + int pmc, altpmc, pp, j; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc == 0 || pmc > 4) + return -1; + altpmc = 5 - pmc; /* 1 <-> 4, 2 <-> 3 */ + pp = event & PM_PMCSEL_MSK; + for (j = 0; j < 4; ++j) { + if (bytedecode_alternatives[pmc - 1][j] == pp) { + return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) | + (altpmc << PM_PMC_SH) | + bytedecode_alternatives[altpmc - 1][j]; + } + } + return -1; +} + +static int power5_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + s64 ae; + + alt[0] = event; + nalt = 1; + i = find_alternative(event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != event) + alt[nalt++] = ae; + } + } else { + ae = find_alternative_bdecode(event); + if (ae > 0) + alt[nalt++] = ae; + } + return nalt; +} + +/* + * Map of which direct events on which PMCs are marked instruction events. + * Indexed by PMCSEL value, bit i (LE) set if PMC i is a marked event. + * Bit 0 is set if it is marked for all PMCs. + * The 0x80 bit indicates a byte decode PMCSEL value. + */ +static unsigned char direct_event_is_marked[0x28] = { + 0, /* 00 */ + 0x1f, /* 01 PM_IOPS_CMPL */ + 0x2, /* 02 PM_MRK_GRP_DISP */ + 0xe, /* 03 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */ + 0, /* 04 */ + 0x1c, /* 05 PM_MRK_BRU_FIN, PM_MRK_INST_FIN, PM_MRK_CRU_FIN */ + 0x80, /* 06 */ + 0x80, /* 07 */ + 0, 0, 0,/* 08 - 0a */ + 0x18, /* 0b PM_THRESH_TIMEO, PM_MRK_GRP_TIMEO */ + 0, /* 0c */ + 0x80, /* 0d */ + 0x80, /* 0e */ + 0, /* 0f */ + 0, /* 10 */ + 0x14, /* 11 PM_MRK_GRP_BR_REDIR, PM_MRK_GRP_IC_MISS */ + 0, /* 12 */ + 0x10, /* 13 PM_MRK_GRP_CMPL */ + 0x1f, /* 14 PM_GRP_MRK, PM_MRK_{FXU,FPU,LSU}_FIN */ + 0x2, /* 15 PM_MRK_GRP_ISSUED */ + 0x80, /* 16 */ + 0x80, /* 17 */ + 0, 0, 0, 0, 0, + 0x80, /* 1d */ + 0x80, /* 1e */ + 0, /* 1f */ + 0x80, /* 20 */ + 0x80, /* 21 */ + 0x80, /* 22 */ + 0x80, /* 23 */ + 0x80, /* 24 */ + 0x80, /* 25 */ + 0x80, /* 26 */ + 0x80, /* 27 */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power5_marked_instr_event(u64 event) +{ + int pmc, psel; + int bit, byte, unit; + u32 mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc >= 5) + return 0; + + bit = -1; + if (psel < sizeof(direct_event_is_marked)) { + if (direct_event_is_marked[psel] & (1 << pmc)) + return 1; + if (direct_event_is_marked[psel] & 0x80) + bit = 4; + else if (psel == 0x08) + bit = pmc - 1; + else if (psel == 0x10) + bit = 4 - pmc; + else if (psel == 0x1b && (pmc == 1 || pmc == 3)) + bit = 4; + } else if ((psel & 0x58) == 0x40) + bit = psel & 7; + + if (!(event & PM_BUSEVENT_MSK)) + return 0; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit == PM_LSU0) { + /* byte 1 bits 0-7, byte 2 bits 0,2-4,6 */ + mask = 0x5dff00; + } else if (unit == PM_LSU1 && byte >= 4) { + byte -= 4; + /* byte 4 bits 1,3,5,7, byte 5 bits 6-7, byte 7 bits 0-4,6 */ + mask = 0x5f00c0aa; + } else + return 0; + + return (mask >> (byte * 8 + bit)) & 1; +} + +static int power5_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], u64 mmcr[]) +{ + u64 mmcr1 = 0; + u64 mmcra = 0; + unsigned int pmc, unit, byte, psel; + unsigned int ttm, grp; + int i, isbus, bit, grsel; + unsigned int pmc_inuse = 0; + unsigned int pmc_grp_use[2]; + unsigned char busbyte[4]; + unsigned char unituse[16]; + int ttmuse; + + if (n_ev > 6) + return -1; + + /* First pass to count resource use */ + pmc_grp_use[0] = pmc_grp_use[1] = 0; + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + /* count 1/2 vs 3/4 use */ + if (pmc <= 4) + ++pmc_grp_use[(pmc - 1) >> 1]; + } + if (event[i] & PM_BUSEVENT_MSK) { + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit > PM_LASTUNIT) + return -1; + if (unit == PM_ISU0_ALT) + unit = PM_ISU0; + if (byte >= 4) { + if (unit != PM_LSU1) + return -1; + ++unit; + byte &= 3; + } + if (!pmc) + ++pmc_grp_use[byte & 1]; + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + unituse[unit] = 1; + } + } + if (pmc_grp_use[0] > 2 || pmc_grp_use[1] > 2) + return -1; + + /* + * Assign resources and set multiplexer selects. + * + * PM_ISU0 can go either on TTM0 or TTM1, but that's the only + * choice we have to deal with. + */ + if (unituse[PM_ISU0] & + (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) { + unituse[PM_ISU0_ALT] = 1; /* move ISU to TTM1 */ + unituse[PM_ISU0] = 0; + } + /* Set TTM[01]SEL fields. */ + ttmuse = 0; + for (i = PM_FPU; i <= PM_ISU1; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH; + } + ttmuse = 0; + for (; i <= PM_GRS; ++i) { + if (!unituse[i]) + continue; + if (ttmuse++) + return -1; + mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH; + } + if (ttmuse > 1) + return -1; + + /* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) { + /* get ISU0 through TTM1 rather than TTM0 */ + unit = PM_ISU0_ALT; + } else if (unit == PM_LSU1 + 1) { + /* select lower word of LSU1 for this byte */ + mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte); + } + ttm = unit >> 2; + mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + isbus = event[i] & PM_BUSEVENT_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + for (pmc = 0; pmc < 4; ++pmc) { + if (pmc_inuse & (1 << pmc)) + continue; + grp = (pmc >> 1) & 1; + if (isbus) { + if (grp == (byte & 1)) + break; + } else if (pmc_grp_use[grp] < 2) { + ++pmc_grp_use[grp]; + break; + } + } + pmc_inuse |= 1 << pmc; + } else if (pmc <= 4) { + /* Direct event */ + --pmc; + if ((psel == 8 || psel == 0x10) && isbus && (byte & 2)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc); + } else { + /* Instructions or run cycles on PMC5/6 */ + --pmc; + } + if (isbus && unit == PM_GRS) { + bit = psel & 7; + grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK; + mmcr1 |= (u64)grsel << grsel_shift[bit]; + } + if (power5_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + if (pmc <= 3) + mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc); + hwc[i] = pmc; + } + + /* Return MMCRx values */ + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void power5_disable_pmc(unsigned int pmc, u64 mmcr[]) +{ + if (pmc <= 3) + mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power5_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0xf, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x100009, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x4c1090, /* LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3c1088, /* LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x230e4, /* BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x230e5, /* BR_MPRED_CR */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x4c1090, 0x3c1088 }, + [C(OP_WRITE)] = { 0x3c1090, 0xc10c3 }, + [C(OP_PREFETCH)] = { 0xc70e7, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x3c309b }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0xc50c3, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x2c4090, 0x800c4 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x800c0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x230e4, 0x230e5 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu power5_pmu = { + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x7000090000555ull, + .test_adder = 0x3000490000000ull, + .compute_mmcr = power5_compute_mmcr, + .get_constraint = power5_get_constraint, + .get_alternatives = power5_get_alternatives, + .disable_pmc = power5_disable_pmc, + .n_generic = ARRAY_SIZE(power5_generic_events), + .generic_events = power5_generic_events, + .cache_events = &power5_cache_events, +}; diff --git a/trunk/arch/powerpc/kernel/power6-pmu.c b/trunk/arch/powerpc/kernel/power6-pmu.c new file mode 100644 index 000000000000..46f74bebcfd9 --- /dev/null +++ b/trunk/arch/powerpc/kernel/power6-pmu.c @@ -0,0 +1,532 @@ +/* + * Performance counter support for POWER6 processors. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +/* + * Bits in event code for POWER6 + */ +#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0x7 +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 16 /* Unit event comes (TTMxSEL encoding) */ +#define PM_UNIT_MSK 0xf +#define PM_UNIT_MSKS (PM_UNIT_MSK << PM_UNIT_SH) +#define PM_LLAV 0x8000 /* Load lookahead match value */ +#define PM_LLA 0x4000 /* Load lookahead match enable */ +#define PM_BYTE_SH 12 /* Byte of event bus to use */ +#define PM_BYTE_MSK 3 +#define PM_SUBUNIT_SH 8 /* Subunit event comes from (NEST_SEL enc.) */ +#define PM_SUBUNIT_MSK 7 +#define PM_SUBUNIT_MSKS (PM_SUBUNIT_MSK << PM_SUBUNIT_SH) +#define PM_PMCSEL_MSK 0xff /* PMCxSEL value */ +#define PM_BUSEVENT_MSK 0xf3700 + +/* + * Bits in MMCR1 for POWER6 + */ +#define MMCR1_TTM0SEL_SH 60 +#define MMCR1_TTMSEL_SH(n) (MMCR1_TTM0SEL_SH - (n) * 4) +#define MMCR1_TTMSEL_MSK 0xf +#define MMCR1_TTMSEL(m, n) (((m) >> MMCR1_TTMSEL_SH(n)) & MMCR1_TTMSEL_MSK) +#define MMCR1_NESTSEL_SH 45 +#define MMCR1_NESTSEL_MSK 0x7 +#define MMCR1_NESTSEL(m) (((m) >> MMCR1_NESTSEL_SH) & MMCR1_NESTSEL_MSK) +#define MMCR1_PMC1_LLA ((u64)1 << 44) +#define MMCR1_PMC1_LLA_VALUE ((u64)1 << 39) +#define MMCR1_PMC1_ADDR_SEL ((u64)1 << 35) +#define MMCR1_PMC1SEL_SH 24 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0xff + +/* + * Map of which direct events on which PMCs are marked instruction events. + * Indexed by PMCSEL value >> 1. + * Bottom 4 bits are a map of which PMCs are interesting, + * top 4 bits say what sort of event: + * 0 = direct marked event, + * 1 = byte decode event, + * 4 = add/and event (PMC1 -> bits 0 & 4), + * 5 = add/and event (PMC1 -> bits 1 & 5), + * 6 = add/and event (PMC1 -> bits 2 & 6), + * 7 = add/and event (PMC1 -> bits 3 & 7). + */ +static unsigned char direct_event_is_marked[0x60 >> 1] = { + 0, /* 00 */ + 0, /* 02 */ + 0, /* 04 */ + 0x07, /* 06 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */ + 0x04, /* 08 PM_MRK_DFU_FIN */ + 0x06, /* 0a PM_MRK_IFU_FIN, PM_MRK_INST_FIN */ + 0, /* 0c */ + 0, /* 0e */ + 0x02, /* 10 PM_MRK_INST_DISP */ + 0x08, /* 12 PM_MRK_LSU_DERAT_MISS */ + 0, /* 14 */ + 0, /* 16 */ + 0x0c, /* 18 PM_THRESH_TIMEO, PM_MRK_INST_FIN */ + 0x0f, /* 1a PM_MRK_INST_DISP, PM_MRK_{FXU,FPU,LSU}_FIN */ + 0x01, /* 1c PM_MRK_INST_ISSUED */ + 0, /* 1e */ + 0, /* 20 */ + 0, /* 22 */ + 0, /* 24 */ + 0, /* 26 */ + 0x15, /* 28 PM_MRK_DATA_FROM_L2MISS, PM_MRK_DATA_FROM_L3MISS */ + 0, /* 2a */ + 0, /* 2c */ + 0, /* 2e */ + 0x4f, /* 30 */ + 0x7f, /* 32 */ + 0x4f, /* 34 */ + 0x5f, /* 36 */ + 0x6f, /* 38 */ + 0x4f, /* 3a */ + 0, /* 3c */ + 0x08, /* 3e PM_MRK_INST_TIMEO */ + 0x1f, /* 40 */ + 0x1f, /* 42 */ + 0x1f, /* 44 */ + 0x1f, /* 46 */ + 0x1f, /* 48 */ + 0x1f, /* 4a */ + 0x1f, /* 4c */ + 0x1f, /* 4e */ + 0, /* 50 */ + 0x05, /* 52 PM_MRK_BR_TAKEN, PM_MRK_BR_MPRED */ + 0x1c, /* 54 PM_MRK_PTEG_FROM_L3MISS, PM_MRK_PTEG_FROM_L2MISS */ + 0x02, /* 56 PM_MRK_LD_MISS_L1 */ + 0, /* 58 */ + 0, /* 5a */ + 0, /* 5c */ + 0, /* 5e */ +}; + +/* + * Masks showing for each unit which bits are marked events. + * These masks are in LE order, i.e. 0x00000001 is byte 0, bit 0. + */ +static u32 marked_bus_events[16] = { + 0x01000000, /* direct events set 1: byte 3 bit 0 */ + 0x00010000, /* direct events set 2: byte 2 bit 0 */ + 0, 0, 0, 0, /* IDU, IFU, nest: nothing */ + 0x00000088, /* VMX set 1: byte 0 bits 3, 7 */ + 0x000000c0, /* VMX set 2: byte 0 bits 4-7 */ + 0x04010000, /* LSU set 1: byte 2 bit 0, byte 3 bit 2 */ + 0xff010000u, /* LSU set 2: byte 2 bit 0, all of byte 3 */ + 0, /* LSU set 3 */ + 0x00000010, /* VMX set 3: byte 0 bit 4 */ + 0, /* BFP set 1 */ + 0x00000022, /* BFP set 2: byte 0 bits 1, 5 */ + 0, 0 +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power6_marked_instr_event(u64 event) +{ + int pmc, psel, ptype; + int bit, byte, unit; + u32 mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = (event & PM_PMCSEL_MSK) >> 1; /* drop edge/level bit */ + if (pmc >= 5) + return 0; + + bit = -1; + if (psel < sizeof(direct_event_is_marked)) { + ptype = direct_event_is_marked[psel]; + if (pmc == 0 || !(ptype & (1 << (pmc - 1)))) + return 0; + ptype >>= 4; + if (ptype == 0) + return 1; + if (ptype == 1) + bit = 0; + else + bit = ptype ^ (pmc - 1); + } else if ((psel & 0x48) == 0x40) + bit = psel & 7; + + if (!(event & PM_BUSEVENT_MSK) || bit == -1) + return 0; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + mask = marked_bus_events[unit]; + return (mask >> (byte * 8 + bit)) & 1; +} + +/* + * Assign PMC numbers and compute MMCR1 value for a set of events + */ +static int p6_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], u64 mmcr[]) +{ + u64 mmcr1 = 0; + u64 mmcra = 0; + int i; + unsigned int pmc, ev, b, u, s, psel; + unsigned int ttmset = 0; + unsigned int pmc_inuse = 0; + + if (n_ev > 6) + return -1; + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc_inuse & (1 << (pmc - 1))) + return -1; /* collision! */ + pmc_inuse |= 1 << (pmc - 1); + } + } + for (i = 0; i < n_ev; ++i) { + ev = event[i]; + pmc = (ev >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + --pmc; + } else { + /* can go on any PMC; find a free one */ + for (pmc = 0; pmc < 4; ++pmc) + if (!(pmc_inuse & (1 << pmc))) + break; + if (pmc >= 4) + return -1; + pmc_inuse |= 1 << pmc; + } + hwc[i] = pmc; + psel = ev & PM_PMCSEL_MSK; + if (ev & PM_BUSEVENT_MSK) { + /* this event uses the event bus */ + b = (ev >> PM_BYTE_SH) & PM_BYTE_MSK; + u = (ev >> PM_UNIT_SH) & PM_UNIT_MSK; + /* check for conflict on this byte of event bus */ + if ((ttmset & (1 << b)) && MMCR1_TTMSEL(mmcr1, b) != u) + return -1; + mmcr1 |= (u64)u << MMCR1_TTMSEL_SH(b); + ttmset |= 1 << b; + if (u == 5) { + /* Nest events have a further mux */ + s = (ev >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK; + if ((ttmset & 0x10) && + MMCR1_NESTSEL(mmcr1) != s) + return -1; + ttmset |= 0x10; + mmcr1 |= (u64)s << MMCR1_NESTSEL_SH; + } + if (0x30 <= psel && psel <= 0x3d) { + /* these need the PMCx_ADDR_SEL bits */ + if (b >= 2) + mmcr1 |= MMCR1_PMC1_ADDR_SEL >> pmc; + } + /* bus select values are different for PMC3/4 */ + if (pmc >= 2 && (psel & 0x90) == 0x80) + psel ^= 0x20; + } + if (ev & PM_LLA) { + mmcr1 |= MMCR1_PMC1_LLA >> pmc; + if (ev & PM_LLAV) + mmcr1 |= MMCR1_PMC1_LLA_VALUE >> pmc; + } + if (power6_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + if (pmc < 4) + mmcr1 |= (u64)psel << MMCR1_PMCSEL_SH(pmc); + } + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0xe) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +/* + * Layout of constraint bits: + * + * 0-1 add field: number of uses of PMC1 (max 1) + * 2-3, 4-5, 6-7, 8-9, 10-11: ditto for PMC2, 3, 4, 5, 6 + * 12-15 add field: number of uses of PMC1-4 (max 4) + * 16-19 select field: unit on byte 0 of event bus + * 20-23, 24-27, 28-31 ditto for bytes 1, 2, 3 + * 32-34 select field: nest (subunit) event selector + */ +static int p6_get_constraint(u64 event, u64 *maskp, u64 *valp) +{ + int pmc, byte, sh, subunit; + u64 mask = 0, value = 0; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 4 && !(event == 0x500009 || event == 0x600005)) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + } + if (event & PM_BUSEVENT_MSK) { + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + sh = byte * 4 + (16 - PM_UNIT_SH); + mask |= PM_UNIT_MSKS << sh; + value |= (u64)(event & PM_UNIT_MSKS) << sh; + if ((event & PM_UNIT_MSKS) == (5 << PM_UNIT_SH)) { + subunit = (event >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK; + mask |= (u64)PM_SUBUNIT_MSK << 32; + value |= (u64)subunit << 32; + } + } + if (pmc <= 4) { + mask |= 0x8000; /* add field for count of PMC1-4 uses */ + value |= 0x1000; + } + *maskp = mask; + *valp = value; + return 0; +} + +static int p6_limited_pmc_event(u64 event) +{ + int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + + return pmc == 5 || pmc == 6; +} + +#define MAX_ALT 4 /* at most 4 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x0130e8, 0x2000f6, 0x3000fc }, /* PM_PTEG_RELOAD_VALID */ + { 0x080080, 0x10000d, 0x30000c, 0x4000f0 }, /* PM_LD_MISS_L1 */ + { 0x080088, 0x200054, 0x3000f0 }, /* PM_ST_MISS_L1 */ + { 0x10000a, 0x2000f4, 0x600005 }, /* PM_RUN_CYC */ + { 0x10000b, 0x2000f5 }, /* PM_RUN_COUNT */ + { 0x10000e, 0x400010 }, /* PM_PURR */ + { 0x100010, 0x4000f8 }, /* PM_FLUSH */ + { 0x10001a, 0x200010 }, /* PM_MRK_INST_DISP */ + { 0x100026, 0x3000f8 }, /* PM_TB_BIT_TRANS */ + { 0x100054, 0x2000f0 }, /* PM_ST_FIN */ + { 0x100056, 0x2000fc }, /* PM_L1_ICACHE_MISS */ + { 0x1000f0, 0x40000a }, /* PM_INST_IMC_MATCH_CMPL */ + { 0x1000f8, 0x200008 }, /* PM_GCT_EMPTY_CYC */ + { 0x1000fc, 0x400006 }, /* PM_LSU_DERAT_MISS_CYC */ + { 0x20000e, 0x400007 }, /* PM_LSU_DERAT_MISS */ + { 0x200012, 0x300012 }, /* PM_INST_DISP */ + { 0x2000f2, 0x3000f2 }, /* PM_INST_DISP */ + { 0x2000f8, 0x300010 }, /* PM_EXT_INT */ + { 0x2000fe, 0x300056 }, /* PM_DATA_FROM_L2MISS */ + { 0x2d0030, 0x30001a }, /* PM_MRK_FPU_FIN */ + { 0x30000a, 0x400018 }, /* PM_MRK_INST_FIN */ + { 0x3000f6, 0x40000e }, /* PM_L1_DCACHE_RELOAD_VALID */ + { 0x3000fe, 0x400056 }, /* PM_DATA_FROM_L3MISS */ +}; + +/* + * This could be made more efficient with a binary search on + * a presorted list, if necessary + */ +static int find_alternatives_list(u64 event) +{ + int i, j; + unsigned int alt; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + return -1; + for (j = 0; j < MAX_ALT; ++j) { + alt = event_alternatives[i][j]; + if (!alt || event < alt) + break; + if (event == alt) + return i; + } + } + return -1; +} + +static int p6_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nlim; + unsigned int psel, pmc; + unsigned int nalt = 1; + u64 aevent; + + alt[0] = event; + nlim = p6_limited_pmc_event(event); + + /* check the alternatives table */ + i = find_alternatives_list(event); + if (i >= 0) { + /* copy out alternatives from list */ + for (j = 0; j < MAX_ALT; ++j) { + aevent = event_alternatives[i][j]; + if (!aevent) + break; + if (aevent != event) + alt[nalt++] = aevent; + nlim += p6_limited_pmc_event(aevent); + } + + } else { + /* Check for alternative ways of computing sum events */ + /* PMCSEL 0x32 counter N == PMCSEL 0x34 counter 5-N */ + psel = event & (PM_PMCSEL_MSK & ~1); /* ignore edge bit */ + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc && (psel == 0x32 || psel == 0x34)) + alt[nalt++] = ((event ^ 0x6) & ~PM_PMC_MSKS) | + ((5 - pmc) << PM_PMC_SH); + + /* PMCSEL 0x38 counter N == PMCSEL 0x3a counter N+/-2 */ + if (pmc && (psel == 0x38 || psel == 0x3a)) + alt[nalt++] = ((event ^ 0x2) & ~PM_PMC_MSKS) | + ((pmc > 2? pmc - 2: pmc + 2) << PM_PMC_SH); + } + + if (flags & PPMU_ONLY_COUNT_RUN) { + /* + * We're only counting in RUN state, + * so PM_CYC is equivalent to PM_RUN_CYC, + * PM_INST_CMPL === PM_RUN_INST_CMPL, PM_PURR === PM_RUN_PURR. + * This doesn't include alternatives that don't provide + * any extra flexibility in assigning PMCs (e.g. + * 0x10000a for PM_RUN_CYC vs. 0x1e for PM_CYC). + * Note that even with these additional alternatives + * we never end up with more than 4 alternatives for any event. + */ + j = nalt; + for (i = 0; i < nalt; ++i) { + switch (alt[i]) { + case 0x1e: /* PM_CYC */ + alt[j++] = 0x600005; /* PM_RUN_CYC */ + ++nlim; + break; + case 0x10000a: /* PM_RUN_CYC */ + alt[j++] = 0x1e; /* PM_CYC */ + break; + case 2: /* PM_INST_CMPL */ + alt[j++] = 0x500009; /* PM_RUN_INST_CMPL */ + ++nlim; + break; + case 0x500009: /* PM_RUN_INST_CMPL */ + alt[j++] = 2; /* PM_INST_CMPL */ + break; + case 0x10000e: /* PM_PURR */ + alt[j++] = 0x4000f4; /* PM_RUN_PURR */ + break; + case 0x4000f4: /* PM_RUN_PURR */ + alt[j++] = 0x10000e; /* PM_PURR */ + break; + } + } + nalt = j; + } + + if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) { + /* remove the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (!p6_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) { + /* remove all but the limited PMC events */ + j = 0; + for (i = 0; i < nalt; ++i) { + if (p6_limited_pmc_event(alt[i])) { + alt[j] = alt[i]; + ++j; + } + } + nalt = j; + } + + return nalt; +} + +static void p6_disable_pmc(unsigned int pmc, u64 mmcr[]) +{ + /* Set PMCxSEL to 0 to disable PMCx */ + if (pmc <= 3) + mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power6_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0x1e, + [PERF_COUNT_HW_INSTRUCTIONS] = 2, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x280030, /* LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x30000c, /* LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x410a0, /* BR_PRED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x400052, /* BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + * The "DTLB" and "ITLB" events relate to the DERAT and IERAT. + */ +static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x80082, 0x80080 }, + [C(OP_WRITE)] = { 0x80086, 0x80088 }, + [C(OP_PREFETCH)] = { 0x810a4, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x100056 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0x4008c, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x150730, 0x250532 }, + [C(OP_WRITE)] = { 0x250432, 0x150432 }, + [C(OP_PREFETCH)] = { 0x810a6, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x20000e }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x420ce }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x430e6, 0x400052 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu power6_pmu = { + .n_counter = 6, + .max_alternatives = MAX_ALT, + .add_fields = 0x1555, + .test_adder = 0x3000, + .compute_mmcr = p6_compute_mmcr, + .get_constraint = p6_get_constraint, + .get_alternatives = p6_get_alternatives, + .disable_pmc = p6_disable_pmc, + .limited_pmc_event = p6_limited_pmc_event, + .flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR, + .n_generic = ARRAY_SIZE(power6_generic_events), + .generic_events = power6_generic_events, + .cache_events = &power6_cache_events, +}; diff --git a/trunk/arch/powerpc/kernel/power7-pmu.c b/trunk/arch/powerpc/kernel/power7-pmu.c new file mode 100644 index 000000000000..b3f7d1216bae --- /dev/null +++ b/trunk/arch/powerpc/kernel/power7-pmu.c @@ -0,0 +1,357 @@ +/* + * Performance counter support for POWER7 processors. + * + * Copyright 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +/* + * Bits in event code for POWER7 + */ +#define PM_PMC_SH 16 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH) +#define PM_UNIT_SH 12 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_COMBINE_SH 11 /* Combined event bit */ +#define PM_COMBINE_MSK 1 +#define PM_COMBINE_MSKS 0x800 +#define PM_L2SEL_SH 8 /* L2 event select */ +#define PM_L2SEL_MSK 7 +#define PM_PMCSEL_MSK 0xff + +/* + * Bits in MMCR1 for POWER7 + */ +#define MMCR1_TTM0SEL_SH 60 +#define MMCR1_TTM1SEL_SH 56 +#define MMCR1_TTM2SEL_SH 52 +#define MMCR1_TTM3SEL_SH 48 +#define MMCR1_TTMSEL_MSK 0xf +#define MMCR1_L2SEL_SH 45 +#define MMCR1_L2SEL_MSK 7 +#define MMCR1_PMC1_COMBINE_SH 35 +#define MMCR1_PMC2_COMBINE_SH 34 +#define MMCR1_PMC3_COMBINE_SH 33 +#define MMCR1_PMC4_COMBINE_SH 32 +#define MMCR1_PMC1SEL_SH 24 +#define MMCR1_PMC2SEL_SH 16 +#define MMCR1_PMC3SEL_SH 8 +#define MMCR1_PMC4SEL_SH 0 +#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8) +#define MMCR1_PMCSEL_MSK 0xff + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * [ ><><><><><><> + * NC P6P5P4P3P2P1 + * + * NC - number of counters + * 15: NC error 0x8000 + * 12-14: number of events needing PMC1-4 0x7000 + * + * P6 + * 11: P6 error 0x800 + * 10-11: Count of events needing PMC6 + * + * P1..P5 + * 0-9: Count of events needing PMC1..PMC5 + */ + +static int power7_get_constraint(u64 event, u64 *maskp, u64 *valp) +{ + int pmc, sh; + u64 mask = 0, value = 0; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + if (pmc >= 5 && !(event == 0x500fa || event == 0x600f4)) + return -1; + } + if (pmc < 5) { + /* need a counter from PMC1-4 set */ + mask |= 0x8000; + value |= 0x1000; + } + *maskp = mask; + *valp = value; + return 0; +} + +#define MAX_ALT 2 /* at most 2 alternatives for any event */ + +static const unsigned int event_alternatives[][MAX_ALT] = { + { 0x200f2, 0x300f2 }, /* PM_INST_DISP */ + { 0x200f4, 0x600f4 }, /* PM_RUN_CYC */ + { 0x400fa, 0x500fa }, /* PM_RUN_INST_CMPL */ +}; + +/* + * Scan the alternatives table for a match and return the + * index into the alternatives table if found, else -1. + */ +static int find_alternative(u64 event) +{ + int i, j; + + for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { + if (event < event_alternatives[i][0]) + break; + for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) + if (event == event_alternatives[i][j]) + return i; + } + return -1; +} + +static s64 find_alternative_decode(u64 event) +{ + int pmc, psel; + + /* this only handles the 4x decode events */ + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if ((pmc == 2 || pmc == 4) && (psel & ~7) == 0x40) + return event - (1 << PM_PMC_SH) + 8; + if ((pmc == 1 || pmc == 3) && (psel & ~7) == 0x48) + return event + (1 << PM_PMC_SH) - 8; + return -1; +} + +static int power7_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + int i, j, nalt = 1; + s64 ae; + + alt[0] = event; + nalt = 1; + i = find_alternative(event); + if (i >= 0) { + for (j = 0; j < MAX_ALT; ++j) { + ae = event_alternatives[i][j]; + if (ae && ae != event) + alt[nalt++] = ae; + } + } else { + ae = find_alternative_decode(event); + if (ae > 0) + alt[nalt++] = ae; + } + + if (flags & PPMU_ONLY_COUNT_RUN) { + /* + * We're only counting in RUN state, + * so PM_CYC is equivalent to PM_RUN_CYC + * and PM_INST_CMPL === PM_RUN_INST_CMPL. + * This doesn't include alternatives that don't provide + * any extra flexibility in assigning PMCs. + */ + j = nalt; + for (i = 0; i < nalt; ++i) { + switch (alt[i]) { + case 0x1e: /* PM_CYC */ + alt[j++] = 0x600f4; /* PM_RUN_CYC */ + break; + case 0x600f4: /* PM_RUN_CYC */ + alt[j++] = 0x1e; + break; + case 0x2: /* PM_PPC_CMPL */ + alt[j++] = 0x500fa; /* PM_RUN_INST_CMPL */ + break; + case 0x500fa: /* PM_RUN_INST_CMPL */ + alt[j++] = 0x2; /* PM_PPC_CMPL */ + break; + } + } + nalt = j; + } + + return nalt; +} + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int power7_marked_instr_event(u64 event) +{ + int pmc, psel; + int unit; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + psel = event & PM_PMCSEL_MSK & ~1; /* trim off edge/level bit */ + if (pmc >= 5) + return 0; + + switch (psel >> 4) { + case 2: + return pmc == 2 || pmc == 4; + case 3: + if (psel == 0x3c) + return pmc == 1; + if (psel == 0x3e) + return pmc != 2; + return 1; + case 4: + case 5: + return unit == 0xd; + case 6: + if (psel == 0x64) + return pmc >= 3; + case 8: + return unit == 0xd; + } + return 0; +} + +static int power7_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], u64 mmcr[]) +{ + u64 mmcr1 = 0; + u64 mmcra = 0; + unsigned int pmc, unit, combine, l2sel, psel; + unsigned int pmc_inuse = 0; + int i; + + /* First pass to count resource use */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 6) + return -1; + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + } + } + + /* Second pass: assign PMCs, set all MMCR1 fields */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + combine = (event[i] >> PM_COMBINE_SH) & PM_COMBINE_MSK; + l2sel = (event[i] >> PM_L2SEL_SH) & PM_L2SEL_MSK; + psel = event[i] & PM_PMCSEL_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + for (pmc = 0; pmc < 4; ++pmc) { + if (!(pmc_inuse & (1 << pmc))) + break; + } + if (pmc >= 4) + return -1; + pmc_inuse |= 1 << pmc; + } else { + /* Direct or decoded event */ + --pmc; + } + if (pmc <= 3) { + mmcr1 |= (u64) unit << (MMCR1_TTM0SEL_SH - 4 * pmc); + mmcr1 |= (u64) combine << (MMCR1_PMC1_COMBINE_SH - pmc); + mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc); + if (unit == 6) /* L2 events */ + mmcr1 |= (u64) l2sel << MMCR1_L2SEL_SH; + } + if (power7_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + hwc[i] = pmc; + } + + /* Return MMCRx values */ + mmcr[0] = 0; + if (pmc_inuse & 1) + mmcr[0] = MMCR0_PMC1CE; + if (pmc_inuse & 0x3e) + mmcr[0] |= MMCR0_PMCjCE; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void power7_disable_pmc(unsigned int pmc, u64 mmcr[]) +{ + if (pmc <= 3) + mmcr[1] &= ~(0xffULL << MMCR1_PMCSEL_SH(pmc)); +} + +static int power7_generic_events[] = { + [PERF_COUNT_CPU_CYCLES] = 0x1e, + [PERF_COUNT_INSTRUCTIONS] = 2, + [PERF_COUNT_CACHE_REFERENCES] = 0xc880, /* LD_REF_L1_LSU */ + [PERF_COUNT_CACHE_MISSES] = 0x400f0, /* LD_MISS_L1 */ + [PERF_COUNT_BRANCH_INSTRUCTIONS] = 0x10068, /* BRU_FIN */ + [PERF_COUNT_BRANCH_MISSES] = 0x400f6, /* BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x400f0, 0xc880 }, + [C(OP_WRITE)] = { 0, 0x300f0 }, + [C(OP_PREFETCH)] = { 0xd8b8, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x200fc }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0x408a, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x6080, 0x6084 }, + [C(OP_WRITE)] = { 0x6082, 0x6086 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x300fc }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x400fc }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x10068, 0x400f6 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu power7_pmu = { + .n_counter = 6, + .max_alternatives = MAX_ALT + 1, + .add_fields = 0x1555ull, + .test_adder = 0x3000ull, + .compute_mmcr = power7_compute_mmcr, + .get_constraint = power7_get_constraint, + .get_alternatives = power7_get_alternatives, + .disable_pmc = power7_disable_pmc, + .n_generic = ARRAY_SIZE(power7_generic_events), + .generic_events = power7_generic_events, + .cache_events = &power7_cache_events, +}; diff --git a/trunk/arch/powerpc/kernel/ppc970-pmu.c b/trunk/arch/powerpc/kernel/ppc970-pmu.c new file mode 100644 index 000000000000..ba0a357a89f4 --- /dev/null +++ b/trunk/arch/powerpc/kernel/ppc970-pmu.c @@ -0,0 +1,482 @@ +/* + * Performance counter support for PPC970-family processors. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +/* + * Bits in event code for PPC970 + */ +#define PM_PMC_SH 12 /* PMC number (1-based) for direct events */ +#define PM_PMC_MSK 0xf +#define PM_UNIT_SH 8 /* TTMMUX number and setting - unit select */ +#define PM_UNIT_MSK 0xf +#define PM_SPCSEL_SH 6 +#define PM_SPCSEL_MSK 3 +#define PM_BYTE_SH 4 /* Byte number of event bus to use */ +#define PM_BYTE_MSK 3 +#define PM_PMCSEL_MSK 0xf + +/* Values in PM_UNIT field */ +#define PM_NONE 0 +#define PM_FPU 1 +#define PM_VPU 2 +#define PM_ISU 3 +#define PM_IFU 4 +#define PM_IDU 5 +#define PM_STS 6 +#define PM_LSU0 7 +#define PM_LSU1U 8 +#define PM_LSU1L 9 +#define PM_LASTUNIT 9 + +/* + * Bits in MMCR0 for PPC970 + */ +#define MMCR0_PMC1SEL_SH 8 +#define MMCR0_PMC2SEL_SH 1 +#define MMCR_PMCSEL_MSK 0x1f + +/* + * Bits in MMCR1 for PPC970 + */ +#define MMCR1_TTM0SEL_SH 62 +#define MMCR1_TTM1SEL_SH 59 +#define MMCR1_TTM3SEL_SH 53 +#define MMCR1_TTMSEL_MSK 3 +#define MMCR1_TD_CP_DBG0SEL_SH 50 +#define MMCR1_TD_CP_DBG1SEL_SH 48 +#define MMCR1_TD_CP_DBG2SEL_SH 46 +#define MMCR1_TD_CP_DBG3SEL_SH 44 +#define MMCR1_PMC1_ADDER_SEL_SH 39 +#define MMCR1_PMC2_ADDER_SEL_SH 38 +#define MMCR1_PMC6_ADDER_SEL_SH 37 +#define MMCR1_PMC5_ADDER_SEL_SH 36 +#define MMCR1_PMC8_ADDER_SEL_SH 35 +#define MMCR1_PMC7_ADDER_SEL_SH 34 +#define MMCR1_PMC3_ADDER_SEL_SH 33 +#define MMCR1_PMC4_ADDER_SEL_SH 32 +#define MMCR1_PMC3SEL_SH 27 +#define MMCR1_PMC4SEL_SH 22 +#define MMCR1_PMC5SEL_SH 17 +#define MMCR1_PMC6SEL_SH 12 +#define MMCR1_PMC7SEL_SH 7 +#define MMCR1_PMC8SEL_SH 2 + +static short mmcr1_adder_bits[8] = { + MMCR1_PMC1_ADDER_SEL_SH, + MMCR1_PMC2_ADDER_SEL_SH, + MMCR1_PMC3_ADDER_SEL_SH, + MMCR1_PMC4_ADDER_SEL_SH, + MMCR1_PMC5_ADDER_SEL_SH, + MMCR1_PMC6_ADDER_SEL_SH, + MMCR1_PMC7_ADDER_SEL_SH, + MMCR1_PMC8_ADDER_SEL_SH +}; + +/* + * Bits in MMCRA + */ + +/* + * Layout of constraint bits: + * 6666555555555544444444443333333333222222222211111111110000000000 + * 3210987654321098765432109876543210987654321098765432109876543210 + * <><><>[ >[ >[ >< >< >< >< ><><><><><><><><> + * SPT0T1 UC PS1 PS2 B0 B1 B2 B3 P1P2P3P4P5P6P7P8 + * + * SP - SPCSEL constraint + * 48-49: SPCSEL value 0x3_0000_0000_0000 + * + * T0 - TTM0 constraint + * 46-47: TTM0SEL value (0=FPU, 2=IFU, 3=VPU) 0xC000_0000_0000 + * + * T1 - TTM1 constraint + * 44-45: TTM1SEL value (0=IDU, 3=STS) 0x3000_0000_0000 + * + * UC - unit constraint: can't have all three of FPU|IFU|VPU, ISU, IDU|STS + * 43: UC3 error 0x0800_0000_0000 + * 42: FPU|IFU|VPU events needed 0x0400_0000_0000 + * 41: ISU events needed 0x0200_0000_0000 + * 40: IDU|STS events needed 0x0100_0000_0000 + * + * PS1 + * 39: PS1 error 0x0080_0000_0000 + * 36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000 + * + * PS2 + * 35: PS2 error 0x0008_0000_0000 + * 32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000 + * + * B0 + * 28-31: Byte 0 event source 0xf000_0000 + * Encoding as for the event code + * + * B1, B2, B3 + * 24-27, 20-23, 16-19: Byte 1, 2, 3 event sources + * + * P1 + * 15: P1 error 0x8000 + * 14-15: Count of events needing PMC1 + * + * P2..P8 + * 0-13: Count of events needing PMC2..PMC8 + */ + +static unsigned char direct_marked_event[8] = { + (1<<2) | (1<<3), /* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */ + (1<<3) | (1<<5), /* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */ + (1<<3) | (1<<5), /* PMC3: PM_MRK_ST_CMPL_INT, PM_MRK_VMX_FIN */ + (1<<4) | (1<<5), /* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */ + (1<<4) | (1<<5), /* PMC5: PM_GRP_MRK, PM_MRK_GRP_TIMEO */ + (1<<3) | (1<<4) | (1<<5), + /* PMC6: PM_MRK_ST_STS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */ + (1<<4) | (1<<5), /* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */ + (1<<4) /* PMC8: PM_MRK_LSU_FIN */ +}; + +/* + * Returns 1 if event counts things relating to marked instructions + * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. + */ +static int p970_marked_instr_event(u64 event) +{ + int pmc, psel, unit, byte, bit; + unsigned int mask; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + psel = event & PM_PMCSEL_MSK; + if (pmc) { + if (direct_marked_event[pmc - 1] & (1 << psel)) + return 1; + if (psel == 0) /* add events */ + bit = (pmc <= 4)? pmc - 1: 8 - pmc; + else if (psel == 7 || psel == 13) /* decode events */ + bit = 4; + else + return 0; + } else + bit = psel; + + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + mask = 0; + switch (unit) { + case PM_VPU: + mask = 0x4c; /* byte 0 bits 2,3,6 */ + case PM_LSU0: + /* byte 2 bits 0,2,3,4,6; all of byte 1 */ + mask = 0x085dff00; + case PM_LSU1L: + mask = 0x50 << 24; /* byte 3 bits 4,6 */ + break; + } + return (mask >> (byte * 8 + bit)) & 1; +} + +/* Masks and values for using events from the various units */ +static u64 unit_cons[PM_LASTUNIT+1][2] = { + [PM_FPU] = { 0xc80000000000ull, 0x040000000000ull }, + [PM_VPU] = { 0xc80000000000ull, 0xc40000000000ull }, + [PM_ISU] = { 0x080000000000ull, 0x020000000000ull }, + [PM_IFU] = { 0xc80000000000ull, 0x840000000000ull }, + [PM_IDU] = { 0x380000000000ull, 0x010000000000ull }, + [PM_STS] = { 0x380000000000ull, 0x310000000000ull }, +}; + +static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp) +{ + int pmc, byte, unit, sh, spcsel; + u64 mask = 0, value = 0; + int grp = -1; + + pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc > 8) + return -1; + sh = (pmc - 1) * 2; + mask |= 2 << sh; + value |= 1 << sh; + grp = ((pmc - 1) >> 1) & 1; + } + unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; + if (unit) { + if (unit > PM_LASTUNIT) + return -1; + mask |= unit_cons[unit][0]; + value |= unit_cons[unit][1]; + byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; + /* + * Bus events on bytes 0 and 2 can be counted + * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8. + */ + if (!pmc) + grp = byte & 1; + /* Set byte lane select field */ + mask |= 0xfULL << (28 - 4 * byte); + value |= (u64)unit << (28 - 4 * byte); + } + if (grp == 0) { + /* increment PMC1/2/5/6 field */ + mask |= 0x8000000000ull; + value |= 0x1000000000ull; + } else if (grp == 1) { + /* increment PMC3/4/7/8 field */ + mask |= 0x800000000ull; + value |= 0x100000000ull; + } + spcsel = (event >> PM_SPCSEL_SH) & PM_SPCSEL_MSK; + if (spcsel) { + mask |= 3ull << 48; + value |= (u64)spcsel << 48; + } + *maskp = mask; + *valp = value; + return 0; +} + +static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[]) +{ + alt[0] = event; + + /* 2 alternatives for LSU empty */ + if (event == 0x2002 || event == 0x3002) { + alt[1] = event ^ 0x1000; + return 2; + } + + return 1; +} + +static int p970_compute_mmcr(u64 event[], int n_ev, + unsigned int hwc[], u64 mmcr[]) +{ + u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0; + unsigned int pmc, unit, byte, psel; + unsigned int ttm, grp; + unsigned int pmc_inuse = 0; + unsigned int pmc_grp_use[2]; + unsigned char busbyte[4]; + unsigned char unituse[16]; + unsigned char unitmap[] = { 0, 0<<3, 3<<3, 1<<3, 2<<3, 0|4, 3|4 }; + unsigned char ttmuse[2]; + unsigned char pmcsel[8]; + int i; + int spcsel; + + if (n_ev > 8) + return -1; + + /* First pass to count resource use */ + pmc_grp_use[0] = pmc_grp_use[1] = 0; + memset(busbyte, 0, sizeof(busbyte)); + memset(unituse, 0, sizeof(unituse)); + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + if (pmc) { + if (pmc_inuse & (1 << (pmc - 1))) + return -1; + pmc_inuse |= 1 << (pmc - 1); + /* count 1/2/5/6 vs 3/4/7/8 use */ + ++pmc_grp_use[((pmc - 1) >> 1) & 1]; + } + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + if (unit) { + if (unit > PM_LASTUNIT) + return -1; + if (!pmc) + ++pmc_grp_use[byte & 1]; + if (busbyte[byte] && busbyte[byte] != unit) + return -1; + busbyte[byte] = unit; + unituse[unit] = 1; + } + } + if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4) + return -1; + + /* + * Assign resources and set multiplexer selects. + * + * PM_ISU can go either on TTM0 or TTM1, but that's the only + * choice we have to deal with. + */ + if (unituse[PM_ISU] & + (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_VPU])) + unitmap[PM_ISU] = 2 | 4; /* move ISU to TTM1 */ + /* Set TTM[01]SEL fields. */ + ttmuse[0] = ttmuse[1] = 0; + for (i = PM_FPU; i <= PM_STS; ++i) { + if (!unituse[i]) + continue; + ttm = unitmap[i]; + ++ttmuse[(ttm >> 2) & 1]; + mmcr1 |= (u64)(ttm & ~4) << MMCR1_TTM1SEL_SH; + } + /* Check only one unit per TTMx */ + if (ttmuse[0] > 1 || ttmuse[1] > 1) + return -1; + + /* Set byte lane select fields and TTM3SEL. */ + for (byte = 0; byte < 4; ++byte) { + unit = busbyte[byte]; + if (!unit) + continue; + if (unit <= PM_STS) + ttm = (unitmap[unit] >> 2) & 1; + else if (unit == PM_LSU0) + ttm = 2; + else { + ttm = 3; + if (unit == PM_LSU1L && byte >= 2) + mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte); + } + mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); + } + + /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ + memset(pmcsel, 0x8, sizeof(pmcsel)); /* 8 means don't count */ + for (i = 0; i < n_ev; ++i) { + pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; + unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; + byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; + psel = event[i] & PM_PMCSEL_MSK; + if (!pmc) { + /* Bus event or any-PMC direct event */ + if (unit) + psel |= 0x10 | ((byte & 2) << 2); + else + psel |= 8; + for (pmc = 0; pmc < 8; ++pmc) { + if (pmc_inuse & (1 << pmc)) + continue; + grp = (pmc >> 1) & 1; + if (unit) { + if (grp == (byte & 1)) + break; + } else if (pmc_grp_use[grp] < 4) { + ++pmc_grp_use[grp]; + break; + } + } + pmc_inuse |= 1 << pmc; + } else { + /* Direct event */ + --pmc; + if (psel == 0 && (byte & 2)) + /* add events on higher-numbered bus */ + mmcr1 |= 1ull << mmcr1_adder_bits[pmc]; + } + pmcsel[pmc] = psel; + hwc[i] = pmc; + spcsel = (event[i] >> PM_SPCSEL_SH) & PM_SPCSEL_MSK; + mmcr1 |= spcsel; + if (p970_marked_instr_event(event[i])) + mmcra |= MMCRA_SAMPLE_ENABLE; + } + for (pmc = 0; pmc < 2; ++pmc) + mmcr0 |= pmcsel[pmc] << (MMCR0_PMC1SEL_SH - 7 * pmc); + for (; pmc < 8; ++pmc) + mmcr1 |= (u64)pmcsel[pmc] << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)); + if (pmc_inuse & 1) + mmcr0 |= MMCR0_PMC1CE; + if (pmc_inuse & 0xfe) + mmcr0 |= MMCR0_PMCjCE; + + mmcra |= 0x2000; /* mark only one IOP per PPC instruction */ + + /* Return MMCRx values */ + mmcr[0] = mmcr0; + mmcr[1] = mmcr1; + mmcr[2] = mmcra; + return 0; +} + +static void p970_disable_pmc(unsigned int pmc, u64 mmcr[]) +{ + int shift, i; + + if (pmc <= 1) { + shift = MMCR0_PMC1SEL_SH - 7 * pmc; + i = 0; + } else { + shift = MMCR1_PMC3SEL_SH - 5 * (pmc - 2); + i = 1; + } + /* + * Setting the PMCxSEL field to 0x08 disables PMC x. + */ + mmcr[i] = (mmcr[i] & ~(0x1fUL << shift)) | (0x08UL << shift); +} + +static int ppc970_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 7, + [PERF_COUNT_HW_INSTRUCTIONS] = 1, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x8810, /* PM_LD_REF_L1 */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x3810, /* PM_LD_MISS_L1 */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x431, /* PM_BR_ISSUED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x327, /* PM_GRP_BR_MPRED */ +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x8810, 0x3810 }, + [C(OP_WRITE)] = { 0x7810, 0x813 }, + [C(OP_PREFETCH)] = { 0x731, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0x733, 0 }, + }, + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x704 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0x700 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0x431, 0x327 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +struct power_pmu ppc970_pmu = { + .n_counter = 8, + .max_alternatives = 2, + .add_fields = 0x001100005555ull, + .test_adder = 0x013300000000ull, + .compute_mmcr = p970_compute_mmcr, + .get_constraint = p970_get_constraint, + .get_alternatives = p970_get_alternatives, + .disable_pmc = p970_disable_pmc, + .n_generic = ARRAY_SIZE(ppc970_generic_events), + .generic_events = ppc970_generic_events, + .cache_events = &ppc970_cache_events, +}; diff --git a/trunk/arch/powerpc/kernel/prom.c b/trunk/arch/powerpc/kernel/prom.c index 5ec6a9e23933..ce01ff2474da 100644 --- a/trunk/arch/powerpc/kernel/prom.c +++ b/trunk/arch/powerpc/kernel/prom.c @@ -426,7 +426,7 @@ static int __init early_parse_mem(char *p) return 1; memory_limit = PAGE_ALIGN(memparse(p, &p)); - DBG("memory limit = 0x%lx\n", memory_limit); + DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit); return 0; } @@ -1160,7 +1160,7 @@ static inline void __init phyp_dump_reserve_mem(void) {} void __init early_init_devtree(void *params) { - unsigned long limit; + phys_addr_t limit; DBG(" -> early_init_devtree(%p)\n", params); @@ -1204,7 +1204,7 @@ void __init early_init_devtree(void *params) limit = memory_limit; if (! limit) { - unsigned long memsize; + phys_addr_t memsize; /* Ensure that total memory size is page-aligned, because * otherwise mark_bootmem() gets upset. */ @@ -1218,7 +1218,7 @@ void __init early_init_devtree(void *params) lmb_analyze(); lmb_dump_all(); - DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); + DBG("Phys. mem: %llx\n", lmb_phys_mem_size()); /* We may need to relocate the flat tree, do it now. * FIXME .. and the initrd too? */ diff --git a/trunk/arch/powerpc/kernel/prom_parse.c b/trunk/arch/powerpc/kernel/prom_parse.c index 8f0856f312da..8362620c9e6f 100644 --- a/trunk/arch/powerpc/kernel/prom_parse.c +++ b/trunk/arch/powerpc/kernel/prom_parse.c @@ -971,7 +971,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq struct device_node *p; const u32 *intspec, *tmp, *addr; u32 intsize, intlen; - int res; + int res = -EINVAL; DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index); @@ -995,21 +995,20 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq /* Get size of interrupt specifier */ tmp = of_get_property(p, "#interrupt-cells", NULL); - if (tmp == NULL) { - of_node_put(p); - return -EINVAL; - } + if (tmp == NULL) + goto out; intsize = *tmp; DBG(" intsize=%d intlen=%d\n", intsize, intlen); /* Check index */ if ((index + 1) * intsize > intlen) - return -EINVAL; + goto out; /* Get new specifier and map it */ res = of_irq_map_raw(p, intspec + index * intsize, intsize, addr, out_irq); +out: of_node_put(p); return res; } diff --git a/trunk/arch/powerpc/kernel/vmlinux.lds.S b/trunk/arch/powerpc/kernel/vmlinux.lds.S index b9ef1644a722..8ef8a14abc95 100644 --- a/trunk/arch/powerpc/kernel/vmlinux.lds.S +++ b/trunk/arch/powerpc/kernel/vmlinux.lds.S @@ -52,9 +52,10 @@ SECTIONS /* Text and gots */ .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); - *(.text.head) + HEAD_TEXT _text = .; - *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) + /* careful! __ftr_alt_* sections need to be close to .text */ + *(.text .fixup __ftr_alt_* .ref.text) SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -263,6 +264,7 @@ SECTIONS *(.data.page_aligned) } + . = ALIGN(L1_CACHE_BYTES); .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { *(.data.cacheline_aligned) } diff --git a/trunk/arch/powerpc/kvm/powerpc.c b/trunk/arch/powerpc/kvm/powerpc.c index 9057335fdc61..2cf915e51e7e 100644 --- a/trunk/arch/powerpc/kvm/powerpc.c +++ b/trunk/arch/powerpc/kvm/powerpc.c @@ -41,6 +41,12 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *v) return !!(v->arch.pending_exceptions); } +int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu) +{ + /* do real check here */ + return 1; +} + int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) { return !(v->arch.msr & MSR_WE); diff --git a/trunk/arch/powerpc/lib/Makefile b/trunk/arch/powerpc/lib/Makefile index 8db35278a4b4..29b742b90f1f 100644 --- a/trunk/arch/powerpc/lib/Makefile +++ b/trunk/arch/powerpc/lib/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o obj-$(CONFIG_XMON) += sstep.o obj-$(CONFIG_KPROBES) += sstep.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o diff --git a/trunk/arch/powerpc/lib/dma-noncoherent.c b/trunk/arch/powerpc/lib/dma-noncoherent.c deleted file mode 100644 index 005a28d380af..000000000000 --- a/trunk/arch/powerpc/lib/dma-noncoherent.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * PowerPC version derived from arch/arm/mm/consistent.c - * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) - * - * Copyright (C) 2000 Russell King - * - * Consistent memory allocators. Used for DMA devices that want to - * share uncached memory with the processor core. The function return - * is the virtual address and 'dma_handle' is the physical address. - * Mostly stolen from the ARM port, with some changes for PowerPC. - * -- Dan - * - * Reorganized to get rid of the arch-specific consistent_* functions - * and provide non-coherent implementations for the DMA API. -Matt - * - * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() - * implementation. This is pulled straight from ARM and barely - * modified. -Matt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * Allocate DMA-coherent memory space and return both the kernel remapped - * virtual and bus address for that space. - */ -void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) -{ - struct page *page; - unsigned long order; - int i; - unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT; - unsigned int array_size = nr_pages * sizeof(struct page *); - struct page **pages; - struct page *end; - u64 mask = 0x00ffffff, limit; /* ISA default */ - struct vm_struct *area; - - BUG_ON(!mem_init_done); - size = PAGE_ALIGN(size); - limit = (mask + 1) & ~mask; - if (limit && size >= limit) { - printk(KERN_WARNING "coherent allocation too big (requested " - "%#x mask %#Lx)\n", size, mask); - return NULL; - } - - order = get_order(size); - - if (mask != 0xffffffff) - gfp |= GFP_DMA; - - page = alloc_pages(gfp, order); - if (!page) - goto no_page; - - end = page + (1 << order); - - /* - * Invalidate any data that might be lurking in the - * kernel direct-mapped region for device DMA. - */ - { - unsigned long kaddr = (unsigned long)page_address(page); - memset(page_address(page), 0, size); - flush_dcache_range(kaddr, kaddr + size); - } - - split_page(page, order); - - /* - * Set the "dma handle" - */ - *handle = page_to_phys(page); - - area = get_vm_area_caller(size, VM_IOREMAP, - __builtin_return_address(1)); - if (!area) - goto out_free_pages; - - if (array_size > PAGE_SIZE) { - pages = vmalloc(array_size); - area->flags |= VM_VPAGES; - } else { - pages = kmalloc(array_size, GFP_KERNEL); - } - if (!pages) - goto out_free_area; - - area->pages = pages; - area->nr_pages = nr_pages; - - for (i = 0; i < nr_pages; i++) - pages[i] = page + i; - - if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages)) - goto out_unmap; - - /* - * Free the otherwise unused pages. - */ - page += nr_pages; - while (page < end) { - __free_page(page); - page++; - } - - return area->addr; -out_unmap: - vunmap(area->addr); - if (array_size > PAGE_SIZE) - vfree(pages); - else - kfree(pages); - goto out_free_pages; -out_free_area: - free_vm_area(area); -out_free_pages: - if (page) - __free_pages(page, order); -no_page: - return NULL; -} -EXPORT_SYMBOL(__dma_alloc_coherent); - -/* - * free a page as defined by the above mapping. - */ -void __dma_free_coherent(size_t size, void *vaddr) -{ - vfree(vaddr); - -} -EXPORT_SYMBOL(__dma_free_coherent); - -/* - * make an area consistent. - */ -void __dma_sync(void *vaddr, size_t size, int direction) -{ - unsigned long start = (unsigned long)vaddr; - unsigned long end = start + size; - - switch (direction) { - case DMA_NONE: - BUG(); - case DMA_FROM_DEVICE: - /* - * invalidate only when cache-line aligned otherwise there is - * the potential for discarding uncommitted data from the cache - */ - if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) - flush_dcache_range(start, end); - else - invalidate_dcache_range(start, end); - break; - case DMA_TO_DEVICE: /* writeback only */ - clean_dcache_range(start, end); - break; - case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - flush_dcache_range(start, end); - break; - } -} -EXPORT_SYMBOL(__dma_sync); - -#ifdef CONFIG_HIGHMEM -/* - * __dma_sync_page() implementation for systems using highmem. - * In this case, each page of a buffer must be kmapped/kunmapped - * in order to have a virtual address for __dma_sync(). This must - * not sleep so kmap_atomic()/kunmap_atomic() are used. - * - * Note: yes, it is possible and correct to have a buffer extend - * beyond the first page. - */ -static inline void __dma_sync_page_highmem(struct page *page, - unsigned long offset, size_t size, int direction) -{ - size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); - size_t cur_size = seg_size; - unsigned long flags, start, seg_offset = offset; - int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; - int seg_nr = 0; - - local_irq_save(flags); - - do { - start = (unsigned long)kmap_atomic(page + seg_nr, - KM_PPC_SYNC_PAGE) + seg_offset; - - /* Sync this buffer segment */ - __dma_sync((void *)start, seg_size, direction); - kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); - seg_nr++; - - /* Calculate next buffer segment size */ - seg_size = min((size_t)PAGE_SIZE, size - cur_size); - - /* Add the segment size to our running total */ - cur_size += seg_size; - seg_offset = 0; - } while (seg_nr < nr_segs); - - local_irq_restore(flags); -} -#endif /* CONFIG_HIGHMEM */ - -/* - * __dma_sync_page makes memory consistent. identical to __dma_sync, but - * takes a struct page instead of a virtual address - */ -void __dma_sync_page(struct page *page, unsigned long offset, - size_t size, int direction) -{ -#ifdef CONFIG_HIGHMEM - __dma_sync_page_highmem(page, offset, size, direction); -#else - unsigned long start = (unsigned long)page_address(page) + offset; - __dma_sync((void *)start, size, direction); -#endif -} -EXPORT_SYMBOL(__dma_sync_page); diff --git a/trunk/arch/powerpc/mm/Makefile b/trunk/arch/powerpc/mm/Makefile index 17290bcedc5e..b746f4ca4209 100644 --- a/trunk/arch/powerpc/mm/Makefile +++ b/trunk/arch/powerpc/mm/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_MM_SLICES) += slice.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o +obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o diff --git a/trunk/arch/powerpc/mm/dma-noncoherent.c b/trunk/arch/powerpc/mm/dma-noncoherent.c new file mode 100644 index 000000000000..36692f5c9a76 --- /dev/null +++ b/trunk/arch/powerpc/mm/dma-noncoherent.c @@ -0,0 +1,400 @@ +/* + * PowerPC version derived from arch/arm/mm/consistent.c + * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) + * + * Copyright (C) 2000 Russell King + * + * Consistent memory allocators. Used for DMA devices that want to + * share uncached memory with the processor core. The function return + * is the virtual address and 'dma_handle' is the physical address. + * Mostly stolen from the ARM port, with some changes for PowerPC. + * -- Dan + * + * Reorganized to get rid of the arch-specific consistent_* functions + * and provide non-coherent implementations for the DMA API. -Matt + * + * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() + * implementation. This is pulled straight from ARM and barely + * modified. -Matt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "mmu_decl.h" + +/* + * This address range defaults to a value that is safe for all + * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It + * can be further configured for specific applications under + * the "Advanced Setup" menu. -Matt + */ +#define CONSISTENT_BASE (IOREMAP_TOP) +#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) + +/* + * This is the page table (2MB) covering uncached, DMA consistent allocations + */ +static DEFINE_SPINLOCK(consistent_lock); + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vm_region region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vm_region_alloc with an appropriate + * struct vm_region head (eg): + * + * struct vm_region vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vm_region_alloc(). + */ +struct ppc_vm_region { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +static struct ppc_vm_region consistent_head = { + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + +static struct ppc_vm_region * +ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct ppc_vm_region *c, *new; + + new = kmalloc(sizeof(struct ppc_vm_region), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&consistent_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + + spin_unlock_irqrestore(&consistent_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&consistent_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr) +{ + struct ppc_vm_region *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + +/* + * Allocate DMA-coherent memory space and return both the kernel remapped + * virtual and bus address for that space. + */ +void * +__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) +{ + struct page *page; + struct ppc_vm_region *c; + unsigned long order; + u64 mask = ISA_DMA_THRESHOLD, limit; + + if (dev) { + mask = dev->coherent_dma_mask; + + /* + * Sanity check the DMA mask - it must be non-zero, and + * must be able to be satisfied by a DMA allocation. + */ + if (mask == 0) { + dev_warn(dev, "coherent DMA mask is unset\n"); + goto no_page; + } + + if ((~mask) & ISA_DMA_THRESHOLD) { + dev_warn(dev, "coherent DMA mask %#llx is smaller " + "than system GFP_DMA mask %#llx\n", + mask, (unsigned long long)ISA_DMA_THRESHOLD); + goto no_page; + } + } + + + size = PAGE_ALIGN(size); + limit = (mask + 1) & ~mask; + if ((limit && size >= limit) || + size >= (CONSISTENT_END - CONSISTENT_BASE)) { + printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", + size, mask); + return NULL; + } + + order = get_order(size); + + /* Might be useful if we ever have a real legacy DMA zone... */ + if (mask != 0xffffffff) + gfp |= GFP_DMA; + + page = alloc_pages(gfp, order); + if (!page) + goto no_page; + + /* + * Invalidate any data that might be lurking in the + * kernel direct-mapped region for device DMA. + */ + { + unsigned long kaddr = (unsigned long)page_address(page); + memset(page_address(page), 0, size); + flush_dcache_range(kaddr, kaddr + size); + } + + /* + * Allocate a virtual address in the consistent mapping region. + */ + c = ppc_vm_region_alloc(&consistent_head, size, + gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (c) { + unsigned long vaddr = c->vm_start; + struct page *end = page + (1 << order); + + split_page(page, order); + + /* + * Set the "dma handle" + */ + *handle = page_to_phys(page); + + do { + SetPageReserved(page); + map_page(vaddr, page_to_phys(page), + pgprot_noncached(PAGE_KERNEL)); + page++; + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* + * Free the otherwise unused pages. + */ + while (page < end) { + __free_page(page); + page++; + } + + return (void *)c->vm_start; + } + + if (page) + __free_pages(page, order); + no_page: + return NULL; +} +EXPORT_SYMBOL(__dma_alloc_coherent); + +/* + * free a page as defined by the above mapping. + */ +void __dma_free_coherent(size_t size, void *vaddr) +{ + struct ppc_vm_region *c; + unsigned long flags, addr; + + size = PAGE_ALIGN(size); + + spin_lock_irqsave(&consistent_lock, flags); + + c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr); + if (!c) + goto no_area; + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + addr = c->vm_start; + do { + pte_t *ptep; + unsigned long pfn; + + ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr), + addr), + addr), + addr); + if (!pte_none(*ptep) && pte_present(*ptep)) { + pfn = pte_pfn(*ptep); + pte_clear(&init_mm, addr, ptep); + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + + ClearPageReserved(page); + __free_page(page); + } + } + addr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + list_del(&c->vm_list); + + spin_unlock_irqrestore(&consistent_lock, flags); + + kfree(c); + return; + + no_area: + spin_unlock_irqrestore(&consistent_lock, flags); + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, vaddr); + dump_stack(); +} +EXPORT_SYMBOL(__dma_free_coherent); + +/* + * make an area consistent. + */ +void __dma_sync(void *vaddr, size_t size, int direction) +{ + unsigned long start = (unsigned long)vaddr; + unsigned long end = start + size; + + switch (direction) { + case DMA_NONE: + BUG(); + case DMA_FROM_DEVICE: + /* + * invalidate only when cache-line aligned otherwise there is + * the potential for discarding uncommitted data from the cache + */ + if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) + flush_dcache_range(start, end); + else + invalidate_dcache_range(start, end); + break; + case DMA_TO_DEVICE: /* writeback only */ + clean_dcache_range(start, end); + break; + case DMA_BIDIRECTIONAL: /* writeback and invalidate */ + flush_dcache_range(start, end); + break; + } +} +EXPORT_SYMBOL(__dma_sync); + +#ifdef CONFIG_HIGHMEM +/* + * __dma_sync_page() implementation for systems using highmem. + * In this case, each page of a buffer must be kmapped/kunmapped + * in order to have a virtual address for __dma_sync(). This must + * not sleep so kmap_atomic()/kunmap_atomic() are used. + * + * Note: yes, it is possible and correct to have a buffer extend + * beyond the first page. + */ +static inline void __dma_sync_page_highmem(struct page *page, + unsigned long offset, size_t size, int direction) +{ + size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); + size_t cur_size = seg_size; + unsigned long flags, start, seg_offset = offset; + int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; + int seg_nr = 0; + + local_irq_save(flags); + + do { + start = (unsigned long)kmap_atomic(page + seg_nr, + KM_PPC_SYNC_PAGE) + seg_offset; + + /* Sync this buffer segment */ + __dma_sync((void *)start, seg_size, direction); + kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); + seg_nr++; + + /* Calculate next buffer segment size */ + seg_size = min((size_t)PAGE_SIZE, size - cur_size); + + /* Add the segment size to our running total */ + cur_size += seg_size; + seg_offset = 0; + } while (seg_nr < nr_segs); + + local_irq_restore(flags); +} +#endif /* CONFIG_HIGHMEM */ + +/* + * __dma_sync_page makes memory consistent. identical to __dma_sync, but + * takes a struct page instead of a virtual address + */ +void __dma_sync_page(struct page *page, unsigned long offset, + size_t size, int direction) +{ +#ifdef CONFIG_HIGHMEM + __dma_sync_page_highmem(page, offset, size, direction); +#else + unsigned long start = (unsigned long)page_address(page) + offset; + __dma_sync((void *)start, size, direction); +#endif +} +EXPORT_SYMBOL(__dma_sync_page); diff --git a/trunk/arch/powerpc/mm/fault.c b/trunk/arch/powerpc/mm/fault.c index 76993941cac9..5beffc8f481e 100644 --- a/trunk/arch/powerpc/mm/fault.c +++ b/trunk/arch/powerpc/mm/fault.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -170,6 +171,8 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, die("Weird page fault", regs, SIGSEGV); } + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the * kernel and should generate an OOPS. Unfortunately, in the case of an @@ -309,6 +312,8 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, } if (ret & VM_FAULT_MAJOR) { current->maj_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); #ifdef CONFIG_PPC_SMLPAR if (firmware_has_feature(FW_FEATURE_CMO)) { preempt_disable(); @@ -316,8 +321,11 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, preempt_enable(); } #endif - } else + } else { current->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } up_read(&mm->mmap_sem); return 0; diff --git a/trunk/arch/powerpc/mm/hash_utils_64.c b/trunk/arch/powerpc/mm/hash_utils_64.c index db556d25c3a7..1ade7eb6ae00 100644 --- a/trunk/arch/powerpc/mm/hash_utils_64.c +++ b/trunk/arch/powerpc/mm/hash_utils_64.c @@ -753,7 +753,7 @@ void __init early_init_mmu(void) } #ifdef CONFIG_SMP -void __init early_init_mmu_secondary(void) +void __cpuinit early_init_mmu_secondary(void) { /* Initialize hash table for that CPU */ if (!firmware_has_feature(FW_FEATURE_LPAR)) diff --git a/trunk/arch/powerpc/mm/init_32.c b/trunk/arch/powerpc/mm/init_32.c index 666a5e8a5be1..3de6a0d93824 100644 --- a/trunk/arch/powerpc/mm/init_32.c +++ b/trunk/arch/powerpc/mm/init_32.c @@ -168,12 +168,8 @@ void __init MMU_init(void) ppc_md.progress("MMU:mapin", 0x301); mapin_ram(); -#ifdef CONFIG_HIGHMEM - ioremap_base = PKMAP_BASE; -#else - ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ -#endif /* CONFIG_HIGHMEM */ - ioremap_bot = ioremap_base; + /* Initialize early top-down ioremap allocator */ + ioremap_bot = IOREMAP_TOP; /* Map in I/O resources */ if (ppc_md.progress) diff --git a/trunk/arch/powerpc/mm/mem.c b/trunk/arch/powerpc/mm/mem.c index f668fa9ba804..579382c163a9 100644 --- a/trunk/arch/powerpc/mm/mem.c +++ b/trunk/arch/powerpc/mm/mem.c @@ -57,7 +57,7 @@ int init_bootmem_done; int mem_init_done; -unsigned long memory_limit; +phys_addr_t memory_limit; #ifdef CONFIG_HIGHMEM pte_t *kmap_pte; @@ -380,6 +380,23 @@ void __init mem_init(void) bsssize >> 10, initsize >> 10); +#ifdef CONFIG_PPC32 + pr_info("Kernel virtual memory layout:\n"); + pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP); +#ifdef CONFIG_HIGHMEM + pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", + PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); +#endif /* CONFIG_HIGHMEM */ +#ifdef CONFIG_NOT_COHERENT_CACHE + pr_info(" * 0x%08lx..0x%08lx : consistent mem\n", + IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE); +#endif /* CONFIG_NOT_COHERENT_CACHE */ + pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", + ioremap_bot, IOREMAP_TOP); + pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", + VMALLOC_START, VMALLOC_END); +#endif /* CONFIG_PPC32 */ + mem_init_done = 1; } diff --git a/trunk/arch/powerpc/mm/mmu_context_nohash.c b/trunk/arch/powerpc/mm/mmu_context_nohash.c index a70e311bd457..030d0005b4d2 100644 --- a/trunk/arch/powerpc/mm/mmu_context_nohash.c +++ b/trunk/arch/powerpc/mm/mmu_context_nohash.c @@ -127,12 +127,12 @@ static unsigned int steal_context_up(unsigned int id) pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm); - /* Mark this mm has having no context anymore */ - mm->context.id = MMU_NO_CONTEXT; - /* Flush the TLB for that context */ local_flush_tlb_mm(mm); + /* Mark this mm has having no context anymore */ + mm->context.id = MMU_NO_CONTEXT; + /* XXX This clear should ultimately be part of local_flush_tlb_mm */ __clear_bit(id, stale_map[cpu]); diff --git a/trunk/arch/powerpc/mm/pgtable.c b/trunk/arch/powerpc/mm/pgtable.c index f5c6fd42265c..ae1d67cc090c 100644 --- a/trunk/arch/powerpc/mm/pgtable.c +++ b/trunk/arch/powerpc/mm/pgtable.c @@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, entry = do_dcache_icache_coherency(entry); changed = !pte_same(*(ptep), entry); if (changed) { - assert_pte_locked(vma->vm_mm, address); + if (!(vma->vm_flags & VM_HUGETLB)) + assert_pte_locked(vma->vm_mm, address); __ptep_set_access_flags(ptep, entry); flush_tlb_page_nohash(vma, address); } diff --git a/trunk/arch/powerpc/mm/pgtable_32.c b/trunk/arch/powerpc/mm/pgtable_32.c index 430d0908fa50..5422169626ba 100644 --- a/trunk/arch/powerpc/mm/pgtable_32.c +++ b/trunk/arch/powerpc/mm/pgtable_32.c @@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable) #endif /* CONFIG_DEBUG_PAGEALLOC */ static int fixmaps; -unsigned long FIXADDR_TOP = (-PAGE_SIZE); -EXPORT_SYMBOL(FIXADDR_TOP); void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) { diff --git a/trunk/arch/powerpc/mm/tlb_nohash_low.S b/trunk/arch/powerpc/mm/tlb_nohash_low.S index 45fed3698349..3037911279b1 100644 --- a/trunk/arch/powerpc/mm/tlb_nohash_low.S +++ b/trunk/arch/powerpc/mm/tlb_nohash_low.S @@ -138,11 +138,7 @@ BEGIN_MMU_FTR_SECTION andi. r3,r3,MMUCSR0_TLBFI@l bne 1b MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) - PPC_TLBILX_ALL(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_ALL_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) + PPC_TLBILX_ALL(0,0) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync @@ -155,11 +151,7 @@ BEGIN_MMU_FTR_SECTION wrteei 0 mfspr r4,SPRN_MAS6 /* save MAS6 */ mtspr SPRN_MAS6,r3 - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_PID(0,0) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_PID_EARLY(0,0) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) mtspr SPRN_MAS6,r4 /* restore MAS6 */ wrtee r10 MMU_FTR_SECTION_ELSE @@ -193,16 +185,12 @@ BEGIN_MMU_FTR_SECTION mtspr SPRN_MAS1,r4 tlbwe MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_VA(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_VA_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync 1: wrtee r10 blr -#elif +#else #error Unsupported processor type ! #endif diff --git a/trunk/arch/powerpc/oprofile/op_model_power4.c b/trunk/arch/powerpc/oprofile/op_model_power4.c index 3e3d91f536e0..80774092db77 100644 --- a/trunk/arch/powerpc/oprofile/op_model_power4.c +++ b/trunk/arch/powerpc/oprofile/op_model_power4.c @@ -26,6 +26,7 @@ static unsigned long reset_value[OP_MAX_COUNTER]; static int oprofile_running; +static int use_slot_nums; /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ static u32 mmcr0_val; @@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_counter_config *ctr, else mmcr0_val |= MMCR0_PROBLEM_DISABLE; + if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || + __is_processor(PV_970) || __is_processor(PV_970FX) || + __is_processor(PV_970MP) || __is_processor(PV_970GX) || + __is_processor(PV_POWER5) || __is_processor(PV_POWER5p)) + use_slot_nums = 1; + return 0; } @@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); - if (mmcra & MMCRA_SAMPLE_ENABLE) { + if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) { slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT); if (slot > 1) pc += 4 * (slot - 1); diff --git a/trunk/arch/powerpc/platforms/40x/Kconfig b/trunk/arch/powerpc/platforms/40x/Kconfig index 14e027f5be66..f39c953d5353 100644 --- a/trunk/arch/powerpc/platforms/40x/Kconfig +++ b/trunk/arch/powerpc/platforms/40x/Kconfig @@ -153,6 +153,7 @@ config 405GPR config XILINX_VIRTEX bool + select DEFAULT_UIMAGE config XILINX_VIRTEX_II_PRO bool diff --git a/trunk/arch/powerpc/platforms/44x/Kconfig b/trunk/arch/powerpc/platforms/44x/Kconfig index bf5c7ff2e6e5..0d83a6a0397d 100644 --- a/trunk/arch/powerpc/platforms/44x/Kconfig +++ b/trunk/arch/powerpc/platforms/44x/Kconfig @@ -246,6 +246,7 @@ config IBM440EP_ERR42 # Xilinx specific config options. config XILINX_VIRTEX bool + select DEFAULT_UIMAGE # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above config XILINX_VIRTEX_5_FXT diff --git a/trunk/arch/powerpc/platforms/Kconfig.cputype b/trunk/arch/powerpc/platforms/Kconfig.cputype index 9da795e49337..732ee93a8e98 100644 --- a/trunk/arch/powerpc/platforms/Kconfig.cputype +++ b/trunk/arch/powerpc/platforms/Kconfig.cputype @@ -1,6 +1,7 @@ config PPC64 bool "64-bit kernel" default n + select HAVE_PERF_COUNTERS help This option selects whether a 32-bit or a 64-bit kernel will be built. diff --git a/trunk/arch/powerpc/platforms/cell/Kconfig b/trunk/arch/powerpc/platforms/cell/Kconfig index 40e24c39ad06..50f17bdd3c16 100644 --- a/trunk/arch/powerpc/platforms/cell/Kconfig +++ b/trunk/arch/powerpc/platforms/cell/Kconfig @@ -13,7 +13,6 @@ config PPC_CELL_COMMON config PPC_CELL_NATIVE bool select PPC_CELL_COMMON - select PPC_OF_PLATFORM_PCI select MPIC select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII @@ -25,6 +24,8 @@ config PPC_IBM_CELL_BLADE bool "IBM Cell Blade" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select MMIO_NVRAM select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE @@ -33,6 +34,8 @@ config PPC_CELLEB bool "Toshiba's Cell Reference Set 'Celleb' Architecture" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select HAS_TXX9_SERIAL select PPC_UDBG_BEAT select USB_OHCI_BIG_ENDIAN_MMIO diff --git a/trunk/arch/powerpc/platforms/cell/ras.c b/trunk/arch/powerpc/platforms/cell/ras.c index 5f961c464cc4..296b5268754e 100644 --- a/trunk/arch/powerpc/platforms/cell/ras.c +++ b/trunk/arch/powerpc/platforms/cell/ras.c @@ -122,12 +122,23 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) area->nid = nid; area->order = order; - area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order); + area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE, + area->order); - if (!area->pages) + if (!area->pages) { + printk(KERN_WARNING "%s: no page on node %d\n", + __func__, area->nid); goto out_free_area; + } - addr = __pa(page_address(area->pages)); + /* + * We move the ptcal area to the middle of the allocated + * page, in order to avoid prefetches in memcpy and similar + * functions stepping on it. + */ + addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1); + printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n", + __func__, area->nid, addr); ret = -EIO; if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid, diff --git a/trunk/arch/powerpc/platforms/fsl_uli1575.c b/trunk/arch/powerpc/platforms/fsl_uli1575.c index 1db6b9e037fc..65a35f38e062 100644 --- a/trunk/arch/powerpc/platforms/fsl_uli1575.c +++ b/trunk/arch/powerpc/platforms/fsl_uli1575.c @@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev) if (!machine_is(mpc86xx_hpcd)) return; - /* Interrupt Disable, Needed when SATA disabled */ - pci_read_config_word(dev, PCI_COMMAND, &temp); - temp |= 1<<10; - pci_write_config_word(dev, PCI_COMMAND, temp); - pci_read_config_byte(dev, 0x83, &c); c |= 0x80; pci_write_config_byte(dev, 0x83, c); diff --git a/trunk/arch/powerpc/platforms/iseries/Kconfig b/trunk/arch/powerpc/platforms/iseries/Kconfig index 647e87787437..47a20cfb4486 100644 --- a/trunk/arch/powerpc/platforms/iseries/Kconfig +++ b/trunk/arch/powerpc/platforms/iseries/Kconfig @@ -17,6 +17,7 @@ config VIODASD config VIOCD tristate "iSeries Virtual I/O CD support" + depends on BLOCK select VIOPATH help If you are running Linux on an IBM iSeries system and you want to diff --git a/trunk/arch/powerpc/platforms/iseries/iommu.c b/trunk/arch/powerpc/platforms/iseries/iommu.c index ff43f1fd8343..40219823d9b0 100644 --- a/trunk/arch/powerpc/platforms/iseries/iommu.c +++ b/trunk/arch/powerpc/platforms/iseries/iommu.c @@ -174,9 +174,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl) } -void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) +static void pci_dma_dev_setup_iseries(struct pci_dev *pdev) { struct iommu_table *tbl; + struct device_node *dn = pdev->sysdata; struct pci_dn *pdn = PCI_DN(dn); const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL); @@ -194,6 +195,8 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) kfree(tbl); pdev->dev.archdata.dma_data = pdn->iommu_table; } +#else +#define pci_dma_dev_setup_iseries NULL #endif static struct iommu_table veth_iommu_table; @@ -251,5 +254,6 @@ void iommu_init_early_iSeries(void) ppc_md.tce_build = tce_build_iSeries; ppc_md.tce_free = tce_free_iSeries; + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries; set_pci_dma_ops(&dma_iommu_ops); } diff --git a/trunk/arch/powerpc/platforms/iseries/pci.c b/trunk/arch/powerpc/platforms/iseries/pci.c index 02a634faedbe..21cddc30220b 100644 --- a/trunk/arch/powerpc/platforms/iseries/pci.c +++ b/trunk/arch/powerpc/platforms/iseries/pci.c @@ -444,7 +444,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev) pdev->sysdata = node; allocate_device_bars(pdev); iseries_device_information(pdev, bus, *sub_bus); - iommu_devnode_init_iSeries(pdev, node); } /* diff --git a/trunk/arch/powerpc/platforms/maple/pci.c b/trunk/arch/powerpc/platforms/maple/pci.c index 301855263b81..04296ffff8bf 100644 --- a/trunk/arch/powerpc/platforms/maple/pci.c +++ b/trunk/arch/powerpc/platforms/maple/pci.c @@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) } return irq; } + +static void __devinit quirk_ipr_msi(struct pci_dev *dev) +{ + /* Something prevents MSIs from the IPR from working on Bimini, + * and the driver has no smarts to recover. So disable MSI + * on it for now. */ + + if (machine_is(maple)) { + dev->no_msi = 1; + dev_info(&dev->dev, "Quirk disabled MSI\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, + quirk_ipr_msi); diff --git a/trunk/arch/powerpc/platforms/pasemi/setup.c b/trunk/arch/powerpc/platforms/pasemi/setup.c index c64fb5bfb37e..153051eb6d93 100644 --- a/trunk/arch/powerpc/platforms/pasemi/setup.c +++ b/trunk/arch/powerpc/platforms/pasemi/setup.c @@ -44,10 +44,6 @@ #include "pasemi.h" -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - /* SDC reset register, must be pre-mapped at reset time */ static void __iomem *reset_reg; diff --git a/trunk/arch/powerpc/platforms/ps3/os-area.c b/trunk/arch/powerpc/platforms/ps3/os-area.c index 86e392b1b049..cf1cd0f8c18f 100644 --- a/trunk/arch/powerpc/platforms/ps3/os-area.c +++ b/trunk/arch/powerpc/platforms/ps3/os-area.c @@ -578,7 +578,7 @@ static void os_area_db_init(struct os_area_db *db) * */ -static void update_flash_db(void) +static void __maybe_unused update_flash_db(void) { int result; int file; diff --git a/trunk/arch/powerpc/platforms/ps3/setup.c b/trunk/arch/powerpc/platforms/ps3/setup.c index 66181821322a..1a7b5ae0c83e 100644 --- a/trunk/arch/powerpc/platforms/ps3/setup.c +++ b/trunk/arch/powerpc/platforms/ps3/setup.c @@ -45,10 +45,6 @@ DEFINE_MUTEX(ps3_gpu_mutex); EXPORT_SYMBOL_GPL(ps3_gpu_mutex); -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - static union ps3_firmware_version ps3_firmware_version; void ps3_get_firmware_version(union ps3_firmware_version *v) diff --git a/trunk/arch/powerpc/platforms/pseries/xics.c b/trunk/arch/powerpc/platforms/pseries/xics.c index 80b513449f4c..be3581a8c294 100644 --- a/trunk/arch/powerpc/platforms/pseries/xics.c +++ b/trunk/arch/powerpc/platforms/pseries/xics.c @@ -333,7 +333,7 @@ static void xics_eoi_lpar(unsigned int virq) lpar_xirr_info_set((0xff << 24) | irq); } -static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) +static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) { unsigned int irq; int status; @@ -342,14 +342,14 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) irq = (unsigned int)irq_map[virq].hwirq; if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) - return; + return -1; status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); if (status) { printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n", __func__, irq, status); - return; + return -1; } /* @@ -363,7 +363,7 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) printk(KERN_WARNING "%s: No online cpus in the mask %s for irq %d\n", __func__, cpulist, virq); - return; + return -1; } status = rtas_call(ibm_set_xive, 3, 1, NULL, @@ -372,8 +372,10 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) if (status) { printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n", __func__, irq, status); - return; + return -1; } + + return 0; } static struct irq_chip xics_pic_direct = { diff --git a/trunk/arch/powerpc/sysdev/axonram.c b/trunk/arch/powerpc/sysdev/axonram.c index 9e105cbc5e5f..a4779912a5ca 100644 --- a/trunk/arch/powerpc/sysdev/axonram.c +++ b/trunk/arch/powerpc/sysdev/axonram.c @@ -250,7 +250,7 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id) set_capacity(bank->disk, bank->size >> AXON_RAM_SECTOR_SHIFT); blk_queue_make_request(bank->disk->queue, axon_ram_make_request); - blk_queue_hardsect_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE); + blk_queue_logical_block_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE); add_disk(bank->disk); bank->irq_id = irq_of_parse_and_map(device->node, 0); diff --git a/trunk/arch/powerpc/sysdev/fsl_rio.c b/trunk/arch/powerpc/sysdev/fsl_rio.c index a0fa4ebb39c6..abdb124e1e2f 100644 --- a/trunk/arch/powerpc/sysdev/fsl_rio.c +++ b/trunk/arch/powerpc/sysdev/fsl_rio.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -159,6 +160,7 @@ struct rio_msg_rx_ring { }; struct rio_priv { + struct device *dev; void __iomem *regs_win; struct rio_atmu_regs __iomem *atmu_regs; struct rio_atmu_regs __iomem *maint_atmu_regs; @@ -484,13 +486,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr for (i = 0; i < priv->msg_tx_ring.size; i++) { priv->msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL); if (!priv->msg_tx_ring.virt_buffer[i]) { rc = -ENOMEM; for (j = 0; j < priv->msg_tx_ring.size; j++) if (priv->msg_tx_ring.virt_buffer[j]) - dma_free_coherent(NULL, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring. virt_buffer[j], @@ -501,7 +503,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr } /* Initialize outbound message descriptor ring */ - priv->msg_tx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, &priv->msg_tx_ring.phys, GFP_KERNEL); if (!priv->msg_tx_ring.virt) { @@ -549,12 +551,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr return rc; out_irq: - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); out_dma: for (i = 0; i < priv->msg_tx_ring.size; i++) - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); @@ -576,7 +579,8 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->omr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); /* Free interrupt */ @@ -654,7 +658,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri priv->msg_rx_ring.virt_buffer[i] = NULL; /* Initialize inbound message ring */ - priv->msg_rx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, &priv->msg_rx_ring.phys, GFP_KERNEL); if (!priv->msg_rx_ring.virt) { @@ -673,7 +677,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, "msg_rx", (void *)mport); if (rc < 0) { - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); goto out; @@ -713,7 +717,7 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->imr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, priv->msg_rx_ring.virt, priv->msg_rx_ring.phys); /* Free interrupt */ @@ -890,7 +894,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) } /* Initialize inbound doorbells */ - priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 * + priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL); if (!priv->dbell_ring.virt) { printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); @@ -911,7 +915,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) "dbell_rx", (void *)mport); if (rc < 0) { iounmap(priv->dbell_win); - dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, priv->dbell_ring.virt, priv->dbell_ring.phys); printk(KERN_ERR "MPC85xx RIO: unable to request inbound doorbell irq"); @@ -1087,6 +1091,8 @@ int fsl_rio_setup(struct of_device *dev) rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); strcpy(port->name, "RIO0 mport"); + priv->dev = &dev->dev; + port->ops = ops; port->host_deviceid = fsl_rio_get_hdid(port->id); diff --git a/trunk/arch/powerpc/sysdev/fsl_soc.c b/trunk/arch/powerpc/sysdev/fsl_soc.c index afe8dbc964aa..5c64ccd402e2 100644 --- a/trunk/arch/powerpc/sysdev/fsl_soc.c +++ b/trunk/arch/powerpc/sysdev/fsl_soc.c @@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void) arch_initcall(of_add_fixed_phys); #endif /* CONFIG_FIXED_PHY */ -#ifdef CONFIG_PPC_83xx -static int __init mpc83xx_wdt_init(void) -{ - struct resource r; - struct device_node *np; - struct platform_device *dev; - u32 freq = fsl_get_sys_freq(); - int ret; - - np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt"); - - if (!np) { - ret = -ENODEV; - goto nodev; - } - - memset(&r, 0, sizeof(r)); - - ret = of_address_to_resource(np, 0, &r); - if (ret) - goto err; - - dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1); - if (IS_ERR(dev)) { - ret = PTR_ERR(dev); - goto err; - } - - ret = platform_device_add_data(dev, &freq, sizeof(freq)); - if (ret) - goto unreg; - - of_node_put(np); - return 0; - -unreg: - platform_device_unregister(dev); -err: - of_node_put(np); -nodev: - return ret; -} - -arch_initcall(mpc83xx_wdt_init); -#endif - static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) { if (!phy_type) diff --git a/trunk/arch/powerpc/sysdev/mpic.c b/trunk/arch/powerpc/sysdev/mpic.c index 21b956701596..352d8c3ef526 100644 --- a/trunk/arch/powerpc/sysdev/mpic.c +++ b/trunk/arch/powerpc/sysdev/mpic.c @@ -807,7 +807,7 @@ static void mpic_end_ipi(unsigned int irq) #endif /* CONFIG_SMP */ -void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) +int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) { struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); @@ -824,6 +824,8 @@ void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), mpic_physmask(cpus_addr(tmp)[0])); } + + return 0; } static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) @@ -1057,13 +1059,6 @@ struct mpic * __init mpic_alloc(struct device_node *node, memset(mpic, 0, sizeof(struct mpic)); mpic->name = name; - mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, - isu_size, &mpic_host_ops, - flags & MPIC_LARGE_VECTORS ? 2048 : 256); - if (mpic->irqhost == NULL) - return NULL; - - mpic->irqhost->host_data = mpic; mpic->hc_irq = mpic_irq_chip; mpic->hc_irq.typename = name; if (flags & MPIC_PRIMARY) @@ -1213,6 +1208,15 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); mpic->isu_mask = (1 << mpic->isu_shift) - 1; + mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, + isu_size ? isu_size : mpic->num_sources, + &mpic_host_ops, + flags & MPIC_LARGE_VECTORS ? 2048 : 256); + if (mpic->irqhost == NULL) + return NULL; + + mpic->irqhost->host_data = mpic; + /* Display version */ switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) { case 1: diff --git a/trunk/arch/powerpc/sysdev/mpic.h b/trunk/arch/powerpc/sysdev/mpic.h index 3cef2af10f42..eff433c322a0 100644 --- a/trunk/arch/powerpc/sysdev/mpic.h +++ b/trunk/arch/powerpc/sysdev/mpic.h @@ -36,6 +36,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic) extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type); extern void mpic_set_vector(unsigned int virq, unsigned int vector); -extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask); +extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask); #endif /* _POWERPC_SYSDEV_MPIC_H */ diff --git a/trunk/arch/powerpc/sysdev/xilinx_intc.c b/trunk/arch/powerpc/sysdev/xilinx_intc.c index a22e1a2df1af..c658b413c9b4 100644 --- a/trunk/arch/powerpc/sysdev/xilinx_intc.c +++ b/trunk/arch/powerpc/sysdev/xilinx_intc.c @@ -41,8 +41,32 @@ static struct irq_host *master_irqhost; +#define XILINX_INTC_MAXIRQS (32) + +/* The following table allows the interrupt type, edge or level, + * to be cached after being read from the device tree until the interrupt + * is mapped + */ +static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS]; + +/* Map the interrupt type from the device tree to the interrupt types + * used by the interrupt subsystem + */ +static unsigned char xilinx_intc_map_senses[] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_LEVEL_LOW, +}; + /* - * IRQ Chip operations + * The interrupt controller is setup such that it doesn't work well with + * the level interrupt handler in the kernel because the handler acks the + * interrupt before calling the application interrupt handler. To deal with + * that, we use 2 different irq chips so that different functions can be + * used for level and edge type interrupts. + * + * IRQ Chip common (across level and edge) operations */ static void xilinx_intc_mask(unsigned int virq) { @@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq) out_be32(regs + XINTC_CIE, 1 << irq); } -static void xilinx_intc_unmask(unsigned int virq) +static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type) +{ + struct irq_desc *desc = get_irq_desc(virq); + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + return 0; +} + +/* + * IRQ Chip level operations + */ +static void xilinx_intc_level_unmask(unsigned int virq) { int irq = virq_to_hw(virq); void * regs = get_irq_chip_data(virq); pr_debug("unmask: %d\n", irq); out_be32(regs + XINTC_SIE, 1 << irq); + + /* ack level irqs because they can't be acked during + * ack function since the handle_level_irq function + * acks the irq before calling the inerrupt handler + */ + out_be32(regs + XINTC_IAR, 1 << irq); } -static void xilinx_intc_ack(unsigned int virq) +static struct irq_chip xilinx_intc_level_irqchip = { + .typename = "Xilinx Level INTC", + .mask = xilinx_intc_mask, + .mask_ack = xilinx_intc_mask, + .unmask = xilinx_intc_level_unmask, + .set_type = xilinx_intc_set_type, +}; + +/* + * IRQ Chip edge operations + */ +static void xilinx_intc_edge_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void *regs = get_irq_chip_data(virq); + pr_debug("unmask: %d\n", irq); + out_be32(regs + XINTC_SIE, 1 << irq); +} + +static void xilinx_intc_edge_ack(unsigned int virq) { int irq = virq_to_hw(virq); void * regs = get_irq_chip_data(virq); @@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq) out_be32(regs + XINTC_IAR, 1 << irq); } -static struct irq_chip xilinx_intc_irqchip = { - .typename = "Xilinx INTC", +static struct irq_chip xilinx_intc_edge_irqchip = { + .typename = "Xilinx Edge INTC", .mask = xilinx_intc_mask, - .unmask = xilinx_intc_unmask, - .ack = xilinx_intc_ack, + .unmask = xilinx_intc_edge_unmask, + .ack = xilinx_intc_edge_ack, + .set_type = xilinx_intc_set_type, }; /* * IRQ Host operations */ + +/** + * xilinx_intc_xlate - translate virq# from device tree interrupts property + */ +static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_flags) +{ + if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS)) + return -EINVAL; + + /* keep a copy of the interrupt type til the interrupt is mapped + */ + xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]]; + + /* Xilinx uses 2 interrupt entries, the 1st being the h/w + * interrupt number, the 2nd being the interrupt type, edge or level + */ + *out_hwirq = intspec[0]; + *out_flags = xilinx_intc_map_senses[intspec[1]]; + + return 0; +} static int xilinx_intc_map(struct irq_host *h, unsigned int virq, irq_hw_number_t irq) { set_irq_chip_data(virq, h->host_data); - set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq); - set_irq_type(virq, IRQ_TYPE_NONE); + + if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH || + xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) { + set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip, + handle_level_irq); + } else { + set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip, + handle_edge_irq); + } return 0; } static struct irq_host_ops xilinx_intc_ops = { .map = xilinx_intc_map, + .xlate = xilinx_intc_xlate, }; struct irq_host * __init @@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np) out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */ /* Allocate and initialize an irq_host structure. */ - irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1); + irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS, + &xilinx_intc_ops, -1); if (!irq) panic(__FILE__ ": Cannot allocate IRQ host\n"); irq->host_data = regs; diff --git a/trunk/arch/s390/appldata/appldata_base.c b/trunk/arch/s390/appldata/appldata_base.c index aeb3cff95f63..1dfc7100c7ee 100644 --- a/trunk/arch/s390/appldata/appldata_base.c +++ b/trunk/arch/s390/appldata/appldata_base.c @@ -98,7 +98,7 @@ static DECLARE_WORK(appldata_work, appldata_work_fn); /* * Ops list */ -static DEFINE_SPINLOCK(appldata_ops_lock); +static DEFINE_MUTEX(appldata_ops_mutex); static LIST_HEAD(appldata_ops_list); @@ -129,14 +129,14 @@ static void appldata_work_fn(struct work_struct *work) i = 0; get_online_cpus(); - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); if (ops->active == 1) { ops->callback(ops->data); } } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); put_online_cpus(); } @@ -338,7 +338,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, struct list_head *lh; found = 0; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); if (&tmp_ops->ctl_table[2] == ctl) { @@ -346,15 +346,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } } if (!found) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } ops = ctl->data; if (!try_module_get(ops->owner)) { // protect this function - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); if (!*lenp || *ppos) { *lenp = 0; @@ -378,11 +378,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; } - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); if ((buf[0] == '1') && (ops->active == 0)) { // protect work queue callback if (!try_module_get(ops->owner)) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); module_put(ops->owner); return -ENODEV; } @@ -407,7 +407,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, "failed with rc=%d\n", ops->name, rc); module_put(ops->owner); } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); out: *lenp = len; *ppos += len; @@ -433,9 +433,9 @@ int appldata_register_ops(struct appldata_ops *ops) if (!ops->ctl_table) return -ENOMEM; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_add(&ops->list, &appldata_ops_list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); ops->ctl_table[0].procname = appldata_proc_name; ops->ctl_table[0].maxlen = 0; @@ -452,9 +452,9 @@ int appldata_register_ops(struct appldata_ops *ops) goto out; return 0; out: - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); kfree(ops->ctl_table); return -ENOMEM; } @@ -466,9 +466,9 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); unregister_sysctl_table(ops->sysctl_header); kfree(ops->ctl_table); } diff --git a/trunk/arch/s390/appldata/appldata_mem.c b/trunk/arch/s390/appldata/appldata_mem.c index 3ed56b7d1b2f..4188cbe63a54 100644 --- a/trunk/arch/s390/appldata/appldata_mem.c +++ b/trunk/arch/s390/appldata/appldata_mem.c @@ -78,7 +78,7 @@ static void appldata_get_mem_data(void *data) { /* * don't put large structures on the stack, we are - * serialized through the appldata_ops_lock and can use static + * serialized through the appldata_ops_mutex and can use static */ static struct sysinfo val; unsigned long ev[NR_VM_EVENT_ITEMS]; diff --git a/trunk/arch/s390/defconfig b/trunk/arch/s390/defconfig index 31e809c77790..d401d56c255f 100644 --- a/trunk/arch/s390/defconfig +++ b/trunk/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Wed Feb 11 10:07:16 2009 +# Linux kernel version: 2.6.30-rc3 +# Thu Apr 23 09:29:52 2009 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_NO_DMA=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_PGSTE=y CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_S390=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -37,6 +38,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y @@ -77,21 +79,24 @@ CONFIG_IPC_NS=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -99,10 +104,12 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_HAVE_SYSCALL_WRAPPERS=y @@ -111,6 +118,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,7 +133,6 @@ CONFIG_MODVERSIONS=y CONFIG_INIT_ALL_POSSIBLE=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -211,11 +219,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # I/O subsystem configuration # -CONFIG_MACHCHK_WARNING=y CONFIG_QDIO=y CONFIG_CHSC_SCH=m @@ -247,12 +256,12 @@ CONFIG_S390_HYPFS_FS=y CONFIG_KEXEC=y # CONFIG_ZFCPDUMP is not set CONFIG_S390_GUEST=y +CONFIG_SECCOMP=y CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -374,6 +383,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -438,7 +448,6 @@ CONFIG_CAN_BCM=m CONFIG_CAN_VCAN=m # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -537,6 +546,7 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ZFCP=y CONFIG_SCSI_DH=m @@ -544,6 +554,10 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y @@ -564,6 +578,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m @@ -667,6 +682,7 @@ CONFIG_S390_VMUR=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y +# CONFIG_AUXDISPLAY is not set # CONFIG_STAGING is not set # @@ -676,6 +692,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -700,6 +717,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -744,6 +766,8 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_EXOFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -758,7 +782,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -806,6 +829,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -830,7 +854,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -840,7 +863,9 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -850,14 +875,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -882,10 +910,12 @@ CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -954,6 +984,7 @@ CONFIG_CRYPTO_SEED=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -969,6 +1000,7 @@ CONFIG_CRYPTO_SHA512_S390=m # CONFIG_CRYPTO_DES_S390 is not set # CONFIG_CRYPTO_AES_S390 is not set CONFIG_S390_PRNG=m +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -982,9 +1014,14 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=m CONFIG_CRC7=m CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_NLATTR=y CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m diff --git a/trunk/arch/s390/include/asm/cputime.h b/trunk/arch/s390/include/asm/cputime.h index 95b0f7db3c69..941384fbd39c 100644 --- a/trunk/arch/s390/include/asm/cputime.h +++ b/trunk/arch/s390/include/asm/cputime.h @@ -174,4 +174,8 @@ cputime64_to_clock_t(cputime64_t cputime) return __div(cputime, 4096000000ULL / USER_HZ); } +cputime64_t s390_get_idle_time(int cpu); + +#define arch_idle_time(cpu) s390_get_idle_time(cpu) + #endif /* _S390_CPUTIME_H */ diff --git a/trunk/arch/s390/include/asm/kvm_host.h b/trunk/arch/s390/include/asm/kvm_host.h index 54ea39f96ecd..a27d0d5a6f86 100644 --- a/trunk/arch/s390/include/asm/kvm_host.h +++ b/trunk/arch/s390/include/asm/kvm_host.h @@ -13,6 +13,8 @@ #ifndef ASM_KVM_HOST_H #define ASM_KVM_HOST_H +#include +#include #include #include #include @@ -210,7 +212,8 @@ struct kvm_vcpu_arch { s390_fp_regs guest_fpregs; unsigned int guest_acrs[NUM_ACRS]; struct kvm_s390_local_interrupt local_int; - struct timer_list ckc_timer; + struct hrtimer ckc_timer; + struct tasklet_struct tasklet; union { cpuid_t cpu_id; u64 stidp_data; diff --git a/trunk/arch/s390/kernel/head.S b/trunk/arch/s390/kernel/head.S index bba14494ee00..22596d70fc2e 100644 --- a/trunk/arch/s390/kernel/head.S +++ b/trunk/arch/s390/kernel/head.S @@ -23,6 +23,7 @@ * */ +#include #include #include #include @@ -35,7 +36,7 @@ #define ARCH_OFFSET 0 #endif -.section ".text.head","ax" +__HEAD #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW diff --git a/trunk/arch/s390/kernel/ipl.c b/trunk/arch/s390/kernel/ipl.c index 6f3711a0eaaa..b8bf4b140065 100644 --- a/trunk/arch/s390/kernel/ipl.c +++ b/trunk/arch/s390/kernel/ipl.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define IPL_PARM_BLOCK_VERSION 0 diff --git a/trunk/arch/s390/kernel/module.c b/trunk/arch/s390/kernel/module.c index eed4a00cb676..ab2e3ed28abc 100644 --- a/trunk/arch/s390/kernel/module.c +++ b/trunk/arch/s390/kernel/module.c @@ -56,8 +56,6 @@ void *module_alloc(unsigned long size) void module_free(struct module *mod, void *module_region) { vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ } static void diff --git a/trunk/arch/s390/kernel/vmlinux.lds.S b/trunk/arch/s390/kernel/vmlinux.lds.S index 7a2063eb88f0..89399b8756c2 100644 --- a/trunk/arch/s390/kernel/vmlinux.lds.S +++ b/trunk/arch/s390/kernel/vmlinux.lds.S @@ -29,8 +29,8 @@ SECTIONS . = 0x00000000; .text : { _text = .; /* Text and read-only data */ - *(.text.head) - TEXT_TEXT + HEAD_TEXT + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT diff --git a/trunk/arch/s390/kernel/vtime.c b/trunk/arch/s390/kernel/vtime.c index 38ea92ff04f9..c87f59bd8246 100644 --- a/trunk/arch/s390/kernel/vtime.c +++ b/trunk/arch/s390/kernel/vtime.c @@ -240,6 +240,22 @@ void vtime_stop_cpu(void) } } +cputime64_t s390_get_idle_time(int cpu) +{ + struct s390_idle_data *idle; + unsigned long long now, idle_time, idle_enter; + + idle = &per_cpu(s390_idle, cpu); + spin_lock(&idle->lock); + now = get_clock(); + idle_time = 0; + idle_enter = idle->idle_enter; + if (idle_enter != 0ULL && idle_enter < now) + idle_time = now - idle_enter; + spin_unlock(&idle->lock); + return idle_time; +} + /* * Sorted add to a list. List is linear searched until first bigger * element is found. diff --git a/trunk/arch/s390/kvm/intercept.c b/trunk/arch/s390/kvm/intercept.c index 9d19803111ba..98997ccba501 100644 --- a/trunk/arch/s390/kvm/intercept.c +++ b/trunk/arch/s390/kvm/intercept.c @@ -154,17 +154,25 @@ static int handle_stop(struct kvm_vcpu *vcpu) static int handle_validity(struct kvm_vcpu *vcpu) { int viwhy = vcpu->arch.sie_block->ipb >> 16; + int rc; + vcpu->stat.exit_validity++; - if (viwhy == 0x37) { - fault_in_pages_writeable((char __user *) - vcpu->kvm->arch.guest_origin + - vcpu->arch.sie_block->prefix, - PAGE_SIZE); - return 0; - } - VCPU_EVENT(vcpu, 2, "unhandled validity intercept code %d", - viwhy); - return -ENOTSUPP; + if ((viwhy == 0x37) && (vcpu->arch.sie_block->prefix + <= vcpu->kvm->arch.guest_memsize - 2*PAGE_SIZE)){ + rc = fault_in_pages_writeable((char __user *) + vcpu->kvm->arch.guest_origin + + vcpu->arch.sie_block->prefix, + 2*PAGE_SIZE); + if (rc) + /* user will receive sigsegv, exit to user */ + rc = -ENOTSUPP; + } else + rc = -ENOTSUPP; + + if (rc) + VCPU_EVENT(vcpu, 2, "unhandled validity intercept code %d", + viwhy); + return rc; } static int handle_instruction(struct kvm_vcpu *vcpu) diff --git a/trunk/arch/s390/kvm/interrupt.c b/trunk/arch/s390/kvm/interrupt.c index 0189356fe209..f04f5301b1b4 100644 --- a/trunk/arch/s390/kvm/interrupt.c +++ b/trunk/arch/s390/kvm/interrupt.c @@ -12,6 +12,8 @@ #include #include +#include +#include #include #include #include "kvm-s390.h" @@ -299,13 +301,13 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu) } if ((!rc) && atomic_read(&fi->active)) { - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); list_for_each_entry(inti, &fi->list, list) if (__interrupt_is_deliverable(vcpu, inti)) { rc = 1; break; } - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); } if ((!rc) && (vcpu->arch.sie_block->ckc < @@ -318,6 +320,12 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu) return rc; } +int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu) +{ + /* do real check here */ + return 1; +} + int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) { return 0; @@ -355,14 +363,12 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) return 0; } - sltime = (vcpu->arch.sie_block->ckc - now) / (0xf4240000ul / HZ) + 1; + sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9; - vcpu->arch.ckc_timer.expires = jiffies + sltime; - - add_timer(&vcpu->arch.ckc_timer); - VCPU_EVENT(vcpu, 5, "enabled wait timer:%llx jiffies", sltime); + hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL); + VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime); no_timer: - spin_lock_bh(&vcpu->arch.local_int.float_int->lock); + spin_lock(&vcpu->arch.local_int.float_int->lock); spin_lock_bh(&vcpu->arch.local_int.lock); add_wait_queue(&vcpu->arch.local_int.wq, &wait); while (list_empty(&vcpu->arch.local_int.list) && @@ -371,33 +377,46 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) !signal_pending(current)) { set_current_state(TASK_INTERRUPTIBLE); spin_unlock_bh(&vcpu->arch.local_int.lock); - spin_unlock_bh(&vcpu->arch.local_int.float_int->lock); + spin_unlock(&vcpu->arch.local_int.float_int->lock); vcpu_put(vcpu); schedule(); vcpu_load(vcpu); - spin_lock_bh(&vcpu->arch.local_int.float_int->lock); + spin_lock(&vcpu->arch.local_int.float_int->lock); spin_lock_bh(&vcpu->arch.local_int.lock); } __unset_cpu_idle(vcpu); __set_current_state(TASK_RUNNING); remove_wait_queue(&vcpu->wq, &wait); spin_unlock_bh(&vcpu->arch.local_int.lock); - spin_unlock_bh(&vcpu->arch.local_int.float_int->lock); - del_timer(&vcpu->arch.ckc_timer); + spin_unlock(&vcpu->arch.local_int.float_int->lock); + hrtimer_try_to_cancel(&vcpu->arch.ckc_timer); return 0; } -void kvm_s390_idle_wakeup(unsigned long data) +void kvm_s390_tasklet(unsigned long parm) { - struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data; + struct kvm_vcpu *vcpu = (struct kvm_vcpu *) parm; - spin_lock_bh(&vcpu->arch.local_int.lock); + spin_lock(&vcpu->arch.local_int.lock); vcpu->arch.local_int.timer_due = 1; if (waitqueue_active(&vcpu->arch.local_int.wq)) wake_up_interruptible(&vcpu->arch.local_int.wq); - spin_unlock_bh(&vcpu->arch.local_int.lock); + spin_unlock(&vcpu->arch.local_int.lock); } +/* + * low level hrtimer wake routine. Because this runs in hardirq context + * we schedule a tasklet to do the real work. + */ +enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer) +{ + struct kvm_vcpu *vcpu; + + vcpu = container_of(timer, struct kvm_vcpu, arch.ckc_timer); + tasklet_schedule(&vcpu->arch.tasklet); + + return HRTIMER_NORESTART; +} void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu) { @@ -436,7 +455,7 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu) if (atomic_read(&fi->active)) { do { deliver = 0; - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); list_for_each_entry_safe(inti, n, &fi->list, list) { if (__interrupt_is_deliverable(vcpu, inti)) { list_del(&inti->list); @@ -447,7 +466,7 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu) } if (list_empty(&fi->list)) atomic_set(&fi->active, 0); - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); if (deliver) { __do_deliver_interrupt(vcpu, inti); kfree(inti); @@ -512,7 +531,7 @@ int kvm_s390_inject_vm(struct kvm *kvm, mutex_lock(&kvm->lock); fi = &kvm->arch.float_int; - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); list_add_tail(&inti->list, &fi->list); atomic_set(&fi->active, 1); sigcpu = find_first_bit(fi->idle_mask, KVM_MAX_VCPUS); @@ -529,7 +548,7 @@ int kvm_s390_inject_vm(struct kvm *kvm, if (waitqueue_active(&li->wq)) wake_up_interruptible(&li->wq); spin_unlock_bh(&li->lock); - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); mutex_unlock(&kvm->lock); return 0; } diff --git a/trunk/arch/s390/kvm/kvm-s390.c b/trunk/arch/s390/kvm/kvm-s390.c index f4d56e9939c9..10bccd1f8aee 100644 --- a/trunk/arch/s390/kvm/kvm-s390.c +++ b/trunk/arch/s390/kvm/kvm-s390.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -195,6 +196,10 @@ struct kvm *kvm_arch_create_vm(void) void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) { VCPU_EVENT(vcpu, 3, "%s", "free cpu"); + if (vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda == + (__u64) vcpu->arch.sie_block) + vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda = 0; + smp_mb(); free_page((unsigned long)(vcpu->arch.sie_block)); kvm_vcpu_uninit(vcpu); kfree(vcpu); @@ -283,8 +288,10 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin; vcpu->arch.sie_block->ecb = 2; vcpu->arch.sie_block->eca = 0xC1002001U; - setup_timer(&vcpu->arch.ckc_timer, kvm_s390_idle_wakeup, - (unsigned long) vcpu); + hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); + tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet, + (unsigned long) vcpu); + vcpu->arch.ckc_timer.function = kvm_s390_idle_wakeup; get_cpu_id(&vcpu->arch.cpu_id); vcpu->arch.cpu_id.version = 0xff; return 0; @@ -307,19 +314,21 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, vcpu->arch.sie_block->icpua = id; BUG_ON(!kvm->arch.sca); - BUG_ON(kvm->arch.sca->cpu[id].sda); - kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block; + if (!kvm->arch.sca->cpu[id].sda) + kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block; + else + BUG_ON(!kvm->vcpus[id]); /* vcpu does already exist */ vcpu->arch.sie_block->scaoh = (__u32)(((__u64)kvm->arch.sca) >> 32); vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca; spin_lock_init(&vcpu->arch.local_int.lock); INIT_LIST_HEAD(&vcpu->arch.local_int.list); vcpu->arch.local_int.float_int = &kvm->arch.float_int; - spin_lock_bh(&kvm->arch.float_int.lock); + spin_lock(&kvm->arch.float_int.lock); kvm->arch.float_int.local_int[id] = &vcpu->arch.local_int; init_waitqueue_head(&vcpu->arch.local_int.wq); vcpu->arch.local_int.cpuflags = &vcpu->arch.sie_block->cpuflags; - spin_unlock_bh(&kvm->arch.float_int.lock); + spin_unlock(&kvm->arch.float_int.lock); rc = kvm_vcpu_init(vcpu, kvm, id); if (rc) @@ -478,6 +487,12 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) vcpu_load(vcpu); + /* verify, that memory has been registered */ + if (!vcpu->kvm->arch.guest_memsize) { + vcpu_put(vcpu); + return -EINVAL; + } + if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); @@ -657,6 +672,8 @@ int kvm_arch_set_memory_region(struct kvm *kvm, struct kvm_memory_slot old, int user_alloc) { + int i; + /* A few sanity checks. We can have exactly one memory slot which has to start at guest virtual zero and which has to be located at a page boundary in userland and which has to end at a page boundary. @@ -664,7 +681,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm, vmas. It is okay to mmap() and munmap() stuff in this slot after doing this call at any time */ - if (mem->slot) + if (mem->slot || kvm->arch.guest_memsize) return -EINVAL; if (mem->guest_phys_addr) @@ -676,15 +693,39 @@ int kvm_arch_set_memory_region(struct kvm *kvm, if (mem->memory_size & (PAGE_SIZE - 1)) return -EINVAL; + if (!user_alloc) + return -EINVAL; + + /* lock all vcpus */ + for (i = 0; i < KVM_MAX_VCPUS; ++i) { + if (!kvm->vcpus[i]) + continue; + if (!mutex_trylock(&kvm->vcpus[i]->mutex)) + goto fail_out; + } + kvm->arch.guest_origin = mem->userspace_addr; kvm->arch.guest_memsize = mem->memory_size; - /* FIXME: we do want to interrupt running CPUs and update their memory - configuration now to avoid race conditions. But hey, changing the - memory layout while virtual CPUs are running is usually bad - programming practice. */ + /* update sie control blocks, and unlock all vcpus */ + for (i = 0; i < KVM_MAX_VCPUS; ++i) { + if (kvm->vcpus[i]) { + kvm->vcpus[i]->arch.sie_block->gmsor = + kvm->arch.guest_origin; + kvm->vcpus[i]->arch.sie_block->gmslm = + kvm->arch.guest_memsize + + kvm->arch.guest_origin + + VIRTIODESCSPACE - 1ul; + mutex_unlock(&kvm->vcpus[i]->mutex); + } + } return 0; + +fail_out: + for (; i >= 0; i--) + mutex_unlock(&kvm->vcpus[i]->mutex); + return -EINVAL; } void kvm_arch_flush_shadow(struct kvm *kvm) diff --git a/trunk/arch/s390/kvm/kvm-s390.h b/trunk/arch/s390/kvm/kvm-s390.h index 00bbe69b78da..748fee872323 100644 --- a/trunk/arch/s390/kvm/kvm-s390.h +++ b/trunk/arch/s390/kvm/kvm-s390.h @@ -14,6 +14,7 @@ #ifndef ARCH_S390_KVM_S390_H #define ARCH_S390_KVM_S390_H +#include #include #include @@ -41,7 +42,8 @@ static inline int __cpu_is_stopped(struct kvm_vcpu *vcpu) } int kvm_s390_handle_wait(struct kvm_vcpu *vcpu); -void kvm_s390_idle_wakeup(unsigned long data); +enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer); +void kvm_s390_tasklet(unsigned long parm); void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu); int kvm_s390_inject_vm(struct kvm *kvm, struct kvm_s390_interrupt *s390int); diff --git a/trunk/arch/s390/kvm/priv.c b/trunk/arch/s390/kvm/priv.c index 4b88834b8dd8..93ecd06e1a74 100644 --- a/trunk/arch/s390/kvm/priv.c +++ b/trunk/arch/s390/kvm/priv.c @@ -204,11 +204,11 @@ static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem) int cpus = 0; int n; - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); for (n = 0; n < KVM_MAX_VCPUS; n++) if (fi->local_int[n]) cpus++; - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); /* deal with other level 3 hypervisors */ if (stsi(mem, 3, 2, 2) == -ENOSYS) diff --git a/trunk/arch/s390/kvm/sigp.c b/trunk/arch/s390/kvm/sigp.c index f27dbedf0866..36678835034d 100644 --- a/trunk/arch/s390/kvm/sigp.c +++ b/trunk/arch/s390/kvm/sigp.c @@ -52,7 +52,7 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, if (cpu_addr >= KVM_MAX_VCPUS) return 3; /* not operational */ - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); if (fi->local_int[cpu_addr] == NULL) rc = 3; /* not operational */ else if (atomic_read(fi->local_int[cpu_addr]->cpuflags) @@ -64,7 +64,7 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, *reg |= SIGP_STAT_STOPPED; rc = 1; /* status stored */ } - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); VCPU_EVENT(vcpu, 4, "sensed status of cpu %x rc %x", cpu_addr, rc); return rc; @@ -86,7 +86,7 @@ static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr) inti->type = KVM_S390_INT_EMERGENCY; - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); li = fi->local_int[cpu_addr]; if (li == NULL) { rc = 3; /* not operational */ @@ -102,7 +102,7 @@ static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr) spin_unlock_bh(&li->lock); rc = 0; /* order accepted */ unlock: - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); VCPU_EVENT(vcpu, 4, "sent sigp emerg to cpu %x", cpu_addr); return rc; } @@ -123,7 +123,7 @@ static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store) inti->type = KVM_S390_SIGP_STOP; - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); li = fi->local_int[cpu_addr]; if (li == NULL) { rc = 3; /* not operational */ @@ -142,7 +142,7 @@ static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store) spin_unlock_bh(&li->lock); rc = 0; /* order accepted */ unlock: - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); VCPU_EVENT(vcpu, 4, "sent sigp stop to cpu %x", cpu_addr); return rc; } @@ -188,7 +188,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, if (!inti) return 2; /* busy */ - spin_lock_bh(&fi->lock); + spin_lock(&fi->lock); li = fi->local_int[cpu_addr]; if ((cpu_addr >= KVM_MAX_VCPUS) || (li == NULL)) { @@ -220,7 +220,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, out_li: spin_unlock_bh(&li->lock); out_fi: - spin_unlock_bh(&fi->lock); + spin_unlock(&fi->lock); return rc; } diff --git a/trunk/arch/sh/Kconfig b/trunk/arch/sh/Kconfig index e7390dd0283d..586cd045e2db 100644 --- a/trunk/arch/sh/Kconfig +++ b/trunk/arch/sh/Kconfig @@ -15,6 +15,7 @@ config SUPERH select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG + select RTC_LIB help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast @@ -74,14 +75,18 @@ config GENERIC_IOMAP bool config GENERIC_TIME - def_bool n + def_bool y config GENERIC_CLOCKEVENTS - def_bool n + def_bool y config GENERIC_CLOCKEVENTS_BROADCAST bool +config GENERIC_CMOS_UPDATE + def_bool y + depends on SH_SH03 || SH_DREAMCAST + config GENERIC_LOCKBREAK def_bool y depends on SMP && PREEMPT @@ -112,6 +117,12 @@ config SYS_SUPPORTS_PCI config SYS_SUPPORTS_CMT bool +config SYS_SUPPORTS_MTU2 + bool + +config SYS_SUPPORTS_TMU + bool + config STACKTRACE_SUPPORT def_bool y @@ -157,13 +168,14 @@ config CPU_SH3 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB + select SYS_SUPPORTS_TMU config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 select CPU_HAS_FPU if !CPU_SH4AL_DSP + select SYS_SUPPORTS_TMU config CPU_SH4A bool @@ -177,6 +189,7 @@ config CPU_SH4AL_DSP config CPU_SH5 bool select CPU_HAS_FPU + select SYS_SUPPORTS_TMU config CPU_SHX2 bool @@ -210,27 +223,32 @@ config CPU_SUBTYPE_SH7201 bool "Support SH7201 processor" select CPU_SH2A select CPU_HAS_FPU + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_MXG bool "Support MX-G processor" select CPU_SH2A + select SYS_SUPPORTS_MTU2 help Select MX-G if running on an R8A03022BG part. @@ -283,6 +301,7 @@ config CPU_SUBTYPE_SH7720 bool "Support SH7720 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -290,6 +309,7 @@ config CPU_SUBTYPE_SH7721 bool "Support SH7721 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -347,6 +367,16 @@ config CPU_SUBTYPE_SH7723 help Select SH7723 if you have an SH-MobileR2 CPU. +config CPU_SUBTYPE_SH7724 + bool "Support SH7724 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SHMOBILE + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_CMT + help + Select SH7724 if you have an SH-MobileR2R CPU. + config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A @@ -442,48 +472,26 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" -config SH_TMU - bool "TMU timer support" - depends on CPU_SH3 || CPU_SH4 +config SH_TIMER_TMU + bool "TMU timer driver" + depends on SYS_SUPPORTS_TMU default y - select GENERIC_TIME - select GENERIC_CLOCKEVENTS help - This enables the use of the TMU as the system timer. + This enables the build of the TMU timer driver. -config SH_CMT - bool "CMT timer support" - depends on SYS_SUPPORTS_CMT && CPU_SH2 +config SH_TIMER_CMT + bool "CMT timer driver" + depends on SYS_SUPPORTS_CMT default y help - This enables the use of the CMT as the system timer. + This enables build of the CMT timer driver. -# -# Support for the new-style CMT driver. This will replace SH_CMT -# once its other dependencies are merged. -# -config SH_TIMER_CMT - bool "CMT clockevents driver" - depends on SYS_SUPPORTS_CMT && !SH_CMT - select GENERIC_CLOCKEVENTS - -config SH_MTU2 - bool "MTU2 timer support" - depends on CPU_SH2A +config SH_TIMER_MTU2 + bool "MTU2 timer driver" + depends on SYS_SUPPORTS_MTU2 default y help - This enables the use of the MTU2 as the system timer. - -config SH_TIMER_IRQ - int - default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ - CPU_SUBTYPE_SH7763 - default "86" if CPU_SUBTYPE_SH7619 - default "140" if CPU_SUBTYPE_SH7206 - default "142" if CPU_SUBTYPE_SH7203 && SH_CMT - default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2 - default "238" if CPU_SUBTYPE_MXG - default "16" + This enables build of the MTU2 timer driver. config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" @@ -494,7 +502,7 @@ config SH_PCLK_FREQ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \ - CPU_SUBTYPE_SH7786 + CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" @@ -503,6 +511,13 @@ config SH_PCLK_FREQ This is necessary for determining the reference clock value on platforms lacking an RTC. +config SH_CLK_CPG + def_bool y + +config SH_CLK_CPG_LEGACY + depends on SH_CLK_CPG + def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE + config SH_CLK_MD int "CPU Mode Pin Setting" depends on CPU_SH2 @@ -663,27 +678,54 @@ config GUSA_RB LLSC, this should be more efficient than the other alternative of disabling interrupts around the atomic sequence. +config SPARSE_IRQ + bool "Support sparse irq numbering" + depends on EXPERIMENTAL + help + This enables support for sparse irqs. This is useful in general + as most CPUs have a fairly sparse array of IRQ vectors, which + the irq_desc then maps directly on to. Systems with a high + number of off-chip IRQs will want to treat this as + experimental until they have been independently verified. + + If you don't know what to do here, say N. + endmenu menu "Boot options" config ZERO_PAGE_OFFSET - hex "Zero page offset" - default "0x00004000" if SH_SH03 - default "0x00010000" if PAGE_SIZE_64KB + hex + default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \ + SH_7751_SOLUTION_ENGINE + default "0x00004000" if PAGE_SIZE_16KB || SH_SH03 default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. config BOOT_LINK_OFFSET - hex "Link address offset for booting" + hex + default "0x00210000" if SH_SHMIN + default "0x00400000" if SH_CAYMAN + default "0x00810000" if SH_7780_SOLUTION_ENGINE + default "0x009e0000" if SH_TITAN + default "0x01800000" if SH_SDK7780 + default "0x02000000" if SH_EDOSK7760 default "0x00800000" help This option allows you to set the link address offset of the zImage. This can be useful if you are on a board which has a small amount of memory. +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + config UBC_WAKEUP bool "Wakeup UBC on startup" depends on CPU_SH4 && !CPU_SH4A diff --git a/trunk/arch/sh/Kconfig.cpu b/trunk/arch/sh/Kconfig.cpu index c7d704381a6d..cd6e3ea598d5 100644 --- a/trunk/arch/sh/Kconfig.cpu +++ b/trunk/arch/sh/Kconfig.cpu @@ -76,11 +76,6 @@ config SPECULATIVE_EXECUTION If unsure, say N. -config SH64_USER_MISALIGNED_FIXUP - def_bool y - prompt "Fixup misaligned loads/stores occurring in user mode" - depends on SUPERH64 - config SH64_ID2815_WORKAROUND bool "Include workaround for SH5-101 cut2 silicon defect ID2815" depends on CPU_SUBTYPE_SH5_101 @@ -101,9 +96,6 @@ config CPU_HAS_SR_RB See for further information on SR.RB and register banking in the kernel in general. -config CPU_HAS_PTEA - bool - config CPU_HAS_PTEAEX bool diff --git a/trunk/arch/sh/Kconfig.debug b/trunk/arch/sh/Kconfig.debug index 0d62681f72a0..8179cc9be9a4 100644 --- a/trunk/arch/sh/Kconfig.debug +++ b/trunk/arch/sh/Kconfig.debug @@ -38,10 +38,10 @@ config EARLY_SCIF_CONSOLE_PORT default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ CPU_SUBTYPE_SH7343 - default "0xffe80000" if CPU_SH4 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 + default "0xffe80000" if CPU_SH4 default "0x00000000" config EARLY_PRINTK @@ -92,7 +92,7 @@ config 4KSTACKS config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" - depends on DEBUG_KERNEL && SUPERH32 + depends on DEBUG_KERNEL && SUPERH32 && BROKEN help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid @@ -122,27 +122,8 @@ config SH_NO_BSS_INIT For all other cases, say N. If this option seems perplexing, or you aren't sure, say N. -config MORE_COMPILE_OPTIONS - bool "Add any additional compile options" - help - If you want to add additional CFLAGS to the kernel build, enable this - option and then enter what you would like to add in the next question. - Note however that -g is already appended with the selection of KGDB. - -config COMPILE_OPTIONS - string "Additional compile arguments" - depends on MORE_COMPILE_OPTIONS - config SH64_SR_WATCH bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" depends on SUPERH64 -config POOR_MANS_STRACE - bool "Debug: enable rudimentary strace facility" - depends on SUPERH64 - help - This option allows system calls to be traced to the console. It also - aids in detecting kernel stack underflow. It is useful for debugging - early-userland problems (e.g. init incurring fatal exceptions.) - endmenu diff --git a/trunk/arch/sh/Makefile b/trunk/arch/sh/Makefile index bece1f7535f2..75d049b03f7e 100644 --- a/trunk/arch/sh/Makefile +++ b/trunk/arch/sh/Makefile @@ -70,9 +70,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml cflags-y += $(call cc-option,-mno-fdpic) cflags-y += $(isaflags-y) -ffreestanding -cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \ - $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g') - OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ -R .stab -R .stabstr -S @@ -85,7 +82,6 @@ defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux # Set some sensible Kbuild defaults -KBUILD_DEFCONFIG := shx3_defconfig KBUILD_IMAGE := $(defaultimage-y) # @@ -93,26 +89,38 @@ KBUILD_IMAGE := $(defaultimage-y) # error messages during linking. # ifdef CONFIG_SUPERH32 -UTS_MACHINE := sh -LDFLAGS_vmlinux += -e _stext +UTS_MACHINE := sh +BITS := 32 +LDFLAGS_vmlinux += -e _stext +KBUILD_DEFCONFIG := shx3_defconfig else -UTS_MACHINE := sh64 -LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ - --defsym phys_stext_shmedia=phys_stext+1 \ - -e phys_stext_shmedia +UTS_MACHINE := sh64 +BITS := 64 +LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ + --defsym phys_stext_shmedia=phys_stext+1 \ + -e phys_stext_shmedia +KBUILD_DEFCONFIG := cayman_defconfig +endif + +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) + endif endif ifdef CONFIG_CPU_LITTLE_ENDIAN -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' +ld-bfd := elf32-$(UTS_MACHINE)-linux +LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd) LDFLAGS += -EL else -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' +ld-bfd := elf32-$(UTS_MACHINE)big-linux +LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd) LDFLAGS += -EB endif -head-y := arch/sh/kernel/init_task.o -head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o -head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o +export ld-bfd BITS + +head-y := arch/sh/kernel/init_task.o arch/sh/kernel/head_$(BITS).o core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ @@ -193,10 +201,11 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux compressed: zImage -archprepare: maketools arch/sh/lib64/syscalltab.h +archprepare: maketools archclean: $(Q)$(MAKE) $(clean)=$(boot) + $(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall define archhelp @echo '* zImage - Compressed kernel image' @@ -205,34 +214,4 @@ define archhelp @echo ' uImage.srec - Create an S-record for U-Boot' endef -define filechk_gen-syscalltab - (set -e; \ - echo "/*"; \ - echo " * DO NOT MODIFY."; \ - echo " *"; \ - echo " * This file was generated by arch/sh/Makefile"; \ - echo " * Any changes will be reverted at build time."; \ - echo " */"; \ - echo ""; \ - echo "#ifndef __SYSCALLTAB_H"; \ - echo "#define __SYSCALLTAB_H"; \ - echo ""; \ - echo "#include "; \ - echo ""; \ - echo "struct syscall_info {"; \ - echo " const char *name;"; \ - echo "} syscall_info_table[] = {"; \ - sed -e '/^.*\.long /!d;s// { "/;s/\(\([^/]*\)\/\)\{1\}.*/\2/; \ - s/[ \t]*$$//g;s/$$/" },/;s/\("\)sys_/\1/g'; \ - echo "};"; \ - echo ""; \ - echo "#define NUM_SYSCALL_INFO_ENTRIES ARRAY_SIZE(syscall_info_table)";\ - echo ""; \ - echo "#endif /* __SYSCALLTAB_H */" ) -endef - -arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S - $(call filechk,gen-syscalltab) - -CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - include/asm-sh/machtypes.h +CLEAN_FILES += include/asm-sh/machtypes.h diff --git a/trunk/arch/sh/boards/Kconfig b/trunk/arch/sh/boards/Kconfig index dcc1af8a2cfe..1c91b1f565d5 100644 --- a/trunk/arch/sh/boards/Kconfig +++ b/trunk/arch/sh/boards/Kconfig @@ -46,6 +46,15 @@ config SH_7722_SOLUTION_ENGINE Select 7722 SolutionEngine if configuring for a Hitachi SH772 evaluation board. +config SH_7724_SOLUTION_ENGINE + bool "SolutionEngine7724" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7724 + select ARCH_REQUIRE_GPIOLIB + help + Select 7724 SolutionEngine if configuring for a Hitachi SH7724 + evaluation board. + config SH_7751_SOLUTION_ENGINE bool "SolutionEngine7751" select SOLUTION_ENGINE @@ -121,7 +130,7 @@ config SH_RTS7751R2D bool "RTS7751R2D" depends on CPU_SUBTYPE_SH7751R select SYS_SUPPORTS_PCI - select IO_TRAPPED + select IO_TRAPPED if MMU help Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. @@ -145,13 +154,13 @@ config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 select SYS_SUPPORTS_PCI - select IO_TRAPPED + select IO_TRAPPED if MMU config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 select SYS_SUPPORTS_PCI - select IO_TRAPPED + select IO_TRAPPED if MMU config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" diff --git a/trunk/arch/sh/boards/board-ap325rxa.c b/trunk/arch/sh/boards/board-ap325rxa.c index 39e46919df14..1c4d83ef2a47 100644 --- a/trunk/arch/sh/boards/board-ap325rxa.c +++ b/trunk/arch/sh/boards/board-ap325rxa.c @@ -263,6 +263,9 @@ static int camera_probe(void) struct i2c_msg msg; int ret; + if (!a) + return -ENODEV; + camera_power(1); msg.addr = 0x6e; msg.buf = camera_ncm03j_magic; @@ -532,6 +535,18 @@ static int __init ap325rxa_devices_setup(void) } device_initcall(ap325rxa_devices_setup); +/* Return the board specific boot mode pin configuration */ +static int ap325rxa_mode_pins(void) +{ + /* MD0=0, MD1=0, MD2=0: Clock Mode 0 + * MD3=0: 16-bit Area0 Bus Width + * MD5=1: Little Endian + * TSTMD=1, MD8=1: Test Mode Disabled + */ + return MODE_PIN5 | MODE_PIN8; +} + static struct sh_machine_vector mv_ap325rxa __initmv = { .mv_name = "AP-325RXA", + .mv_mode_pins = ap325rxa_mode_pins, }; diff --git a/trunk/arch/sh/boards/board-sh7785lcr.c b/trunk/arch/sh/boards/board-sh7785lcr.c index 6f94f17adc46..7be56fb06c1f 100644 --- a/trunk/arch/sh/boards/board-sh7785lcr.c +++ b/trunk/arch/sh/boards/board-sh7785lcr.c @@ -2,12 +2,12 @@ * Renesas Technology Corp. R0P7785LC0011RL Support. * * Copyright (C) 2008 Yoshihiro Shimoda + * Copyright (C) 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include #include #include @@ -19,8 +19,12 @@ #include #include #include -#include +#include +#include #include +#include +#include +#include /* * NOTE: This board has 2 physical memory maps. @@ -273,6 +277,20 @@ void __init init_sh7785lcr_IRQ(void) plat_irq_setup_pins(IRQ_MODE_IRQ3210); } +static int sh7785lcr_clk_init(void) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "extal"); + if (!clk || IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333333); + clk_put(clk); + + return ret; +} + static void sh7785lcr_power_off(void) { unsigned char *p; @@ -303,12 +321,34 @@ static void __init sh7785lcr_setup(char **cmdline_p) writel(0x000307c2, sm501_reg); } +/* Return the board specific boot mode pin configuration */ +static int sh7785lcr_mode_pins(void) +{ + int value = 0; + + /* These are the factory default settings of S1 and S2. + * If you change these dip switches then you will need to + * adjust the values below as well. + */ + value |= MODE_PIN4; /* Clock Mode 16 */ + value |= MODE_PIN5; /* 32-bit Area0 bus width */ + value |= MODE_PIN6; /* 32-bit Area0 bus width */ + value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */ + value |= MODE_PIN8; /* Little Endian */ + value |= MODE_PIN9; /* Master Mode */ + value |= MODE_PIN14; /* No PLL step-up */ + + return value; +} + /* * The Machine Vector */ static struct sh_machine_vector mv_sh7785lcr __initmv = { .mv_name = "SH7785LCR", .mv_setup = sh7785lcr_setup, + .mv_clk_init = sh7785lcr_clk_init, .mv_init_irq = init_sh7785lcr_IRQ, + .mv_mode_pins = sh7785lcr_mode_pins, }; diff --git a/trunk/arch/sh/boards/mach-cayman/Makefile b/trunk/arch/sh/boards/mach-cayman/Makefile index cafe1ac3b29c..00fa3eaecb1b 100644 --- a/trunk/arch/sh/boards/mach-cayman/Makefile +++ b/trunk/arch/sh/boards/mach-cayman/Makefile @@ -1,4 +1,4 @@ # # Makefile for the Hitachi Cayman specific parts of the kernel # -obj-y := setup.o irq.o +obj-y := setup.o irq.o panic.o diff --git a/trunk/arch/sh/boards/mach-cayman/irq.c b/trunk/arch/sh/boards/mach-cayman/irq.c index da62ad516994..33f770856319 100644 --- a/trunk/arch/sh/boards/mach-cayman/irq.c +++ b/trunk/arch/sh/boards/mach-cayman/irq.c @@ -142,26 +142,11 @@ int cayman_irq_demux(int evt) return irq; } -#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) -int cayman_irq_describe(char* p, int irq) -{ - if (irq < NR_INTC_IRQS) { - return intc_irq_describe(p, irq); - } else if (irq < NR_INTC_IRQS + 8) { - return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS); - } else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) { - return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24)); - } - - return 0; -} -#endif - void init_cayman_irq(void) { int i; - epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD"); + epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024); if (!epld_virt) { printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); return; diff --git a/trunk/arch/sh/boards/mach-cayman/panic.c b/trunk/arch/sh/boards/mach-cayman/panic.c new file mode 100644 index 000000000000..d1e67306d07c --- /dev/null +++ b/trunk/arch/sh/boards/mach-cayman/panic.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2003 Richard Curnow, SuperH UK Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include + +/* THIS IS A PHYSICAL ADDRESS */ +#define HDSP2534_ADDR (0x04002100) + +static void poor_mans_delay(void) +{ + int i; + + for (i = 0; i < 2500000; i++) + cpu_relax(); +} + +static void show_value(unsigned long x) +{ + int i; + unsigned nibble; + for (i = 0; i < 8; i++) { + nibble = ((x >> (i * 4)) & 0xf); + + __raw_writeb(nibble + ((nibble > 9) ? 55 : 48), + HDSP2534_ADDR + 0xe0 + ((7 - i) << 2)); + } +} + +void +panic_handler(unsigned long panicPC, unsigned long panicSSR, + unsigned long panicEXPEVT) +{ + while (1) { + /* This piece of code displays the PC on the LED display */ + show_value(panicPC); + poor_mans_delay(); + show_value(panicSSR); + poor_mans_delay(); + show_value(panicEXPEVT); + poor_mans_delay(); + } +} diff --git a/trunk/arch/sh/boards/mach-cayman/setup.c b/trunk/arch/sh/boards/mach-cayman/setup.c index e7f9cc5f2ff1..7e8216ac31bd 100644 --- a/trunk/arch/sh/boards/mach-cayman/setup.c +++ b/trunk/arch/sh/boards/mach-cayman/setup.c @@ -102,7 +102,7 @@ static int __init smsc_superio_setup(void) { unsigned char devid, devrev; - smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO"); + smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024); if (!smsc_superio_virt) { panic("Unable to remap SMSC SuperIO\n"); } diff --git a/trunk/arch/sh/boards/mach-dreamcast/setup.c b/trunk/arch/sh/boards/mach-dreamcast/setup.c index d1bee4884cd6..ebe99227d4e6 100644 --- a/trunk/arch/sh/boards/mach-dreamcast/setup.c +++ b/trunk/arch/sh/boards/mach-dreamcast/setup.c @@ -30,7 +30,6 @@ extern struct irq_chip systemasic_int; extern void aica_time_init(void); -extern int gapspci_init(void); extern int systemasic_irq_demux(int); static void __init dreamcast_setup(char **cmdline_p) @@ -51,11 +50,6 @@ static void __init dreamcast_setup(char **cmdline_p) handle_level_irq); board_time_init = aica_time_init; - -#ifdef CONFIG_PCI - if (gapspci_init() < 0) - printk(KERN_WARNING "GAPSPCI was not detected.\n"); -#endif } static struct sh_machine_vector mv_dreamcast __initmv = { diff --git a/trunk/arch/sh/boards/mach-migor/setup.c b/trunk/arch/sh/boards/mach-migor/setup.c index 1ee1de0bc1c3..6ed401cd3156 100644 --- a/trunk/arch/sh/boards/mach-migor/setup.c +++ b/trunk/arch/sh/boards/mach-migor/setup.c @@ -584,3 +584,22 @@ static int __init migor_devices_setup(void) return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices)); } __initcall(migor_devices_setup); + +/* Return the board specific boot mode pin configuration */ +static int migor_mode_pins(void) +{ + /* MD0=1, MD1=1, MD2=0: Clock Mode 3 + * MD3=0: 16-bit Area0 Bus Width + * MD5=1: Little Endian + * TSTMD=1, MD8=0: Test Mode Disabled + */ + return MODE_PIN0 | MODE_PIN1 | MODE_PIN5; +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_migor __initmv = { + .mv_name = "Migo-R", + .mv_mode_pins = migor_mode_pins, +}; diff --git a/trunk/arch/sh/boards/mach-r2d/setup.c b/trunk/arch/sh/boards/mach-r2d/setup.c index c585be00956e..a625ecb93e47 100644 --- a/trunk/arch/sh/boards/mach-r2d/setup.c +++ b/trunk/arch/sh/boards/mach-r2d/setup.c @@ -10,6 +10,9 @@ */ #include #include +#include +#include +#include #include #include #include @@ -181,6 +184,50 @@ static struct platform_device sm501_device = { .resource = sm501_resources, }; +static struct mtd_partition r2d_partitions[] = { + { + .name = "U-Boot", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Environment", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x001c0000, + }, { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(r2d_partitions), + .parts = r2d_partitions, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x02000000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + static struct platform_device *rts7751r2d_devices[] __initdata = { &sm501_device, &heartbeat_device, @@ -203,6 +250,9 @@ static int __init rts7751r2d_devices_setup(void) if (register_trapped_io(&cf_trapped_io) == 0) platform_device_register(&cf_ide_device); + if (mach_is_r2d_plus()) + platform_device_register(&flash_device); + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); return platform_add_devices(rts7751r2d_devices, diff --git a/trunk/arch/sh/boards/mach-se/7724/Makefile b/trunk/arch/sh/boards/mach-se/7724/Makefile new file mode 100644 index 000000000000..349cbd6ce82d --- /dev/null +++ b/trunk/arch/sh/boards/mach-se/7724/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + +obj-y := setup.o irq.o \ No newline at end of file diff --git a/trunk/arch/sh/boards/mach-se/7724/irq.c b/trunk/arch/sh/boards/mach-se/7724/irq.c new file mode 100644 index 000000000000..f76cf3b49f23 --- /dev/null +++ b/trunk/arch/sh/boards/mach-se/7724/irq.c @@ -0,0 +1,139 @@ +/* + * linux/arch/sh/boards/se/7724/irq.c + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Kuninori Morimoto + * + * Based on linux/arch/sh/boards/se/7722/irq.c + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7724 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +struct fpga_irq { + unsigned long sraddr; + unsigned long mraddr; + unsigned short mask; + unsigned int base; +}; + +static unsigned int fpga2irq(unsigned int irq) +{ + if (irq >= IRQ0_BASE && + irq <= IRQ0_END) + return IRQ0_IRQ; + else if (irq >= IRQ1_BASE && + irq <= IRQ1_END) + return IRQ1_IRQ; + else + return IRQ2_IRQ; +} + +static struct fpga_irq get_fpga_irq(unsigned int irq) +{ + struct fpga_irq set; + + switch (irq) { + case IRQ0_IRQ: + set.sraddr = IRQ0_SR; + set.mraddr = IRQ0_MR; + set.mask = IRQ0_MASK; + set.base = IRQ0_BASE; + break; + case IRQ1_IRQ: + set.sraddr = IRQ1_SR; + set.mraddr = IRQ1_MR; + set.mask = IRQ1_MASK; + set.base = IRQ1_BASE; + break; + default: + set.sraddr = IRQ2_SR; + set.mraddr = IRQ2_MR; + set.mask = IRQ2_MASK; + set.base = IRQ2_BASE; + break; + } + + return set; +} + +static void disable_se7724_irq(unsigned int irq) +{ + struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); + unsigned int bit = irq - set.base; + ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr); +} + +static void enable_se7724_irq(unsigned int irq) +{ + struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); + unsigned int bit = irq - set.base; + ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr); +} + +static struct irq_chip se7724_irq_chip __read_mostly = { + .name = "SE7724-FPGA", + .mask = disable_se7724_irq, + .unmask = enable_se7724_irq, + .mask_ack = disable_se7724_irq, +}; + +static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct fpga_irq set = get_fpga_irq(irq); + unsigned short intv = ctrl_inw(set.sraddr); + struct irq_desc *ext_desc; + unsigned int ext_irq = set.base; + + intv &= set.mask; + + while (intv) { + if (intv & 0x0001) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; + } +} + +/* + * Initialize IRQ setting + */ +void __init init_se7724_IRQ(void) +{ + int i; + + ctrl_outw(0xffff, IRQ0_MR); /* mask all */ + ctrl_outw(0xffff, IRQ1_MR); /* mask all */ + ctrl_outw(0xffff, IRQ2_MR); /* mask all */ + ctrl_outw(0x0000, IRQ0_SR); /* clear irq */ + ctrl_outw(0x0000, IRQ1_SR); /* clear irq */ + ctrl_outw(0x0000, IRQ2_SR); /* clear irq */ + ctrl_outw(0x002a, IRQ_MODE); /* set irq type */ + + for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i, + &se7724_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + + set_irq_chained_handler(IRQ1_IRQ, se7724_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + + set_irq_chained_handler(IRQ2_IRQ, se7724_irq_demux); + set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW); +} diff --git a/trunk/arch/sh/boards/mach-se/7724/setup.c b/trunk/arch/sh/boards/mach-se/7724/setup.c new file mode 100644 index 000000000000..9cd04bd558b8 --- /dev/null +++ b/trunk/arch/sh/boards/mach-se/7724/setup.c @@ -0,0 +1,448 @@ +/* + * linux/arch/sh/boards/se/7724/setup.c + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Kuninori Morimoto + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include
); if section is defined, else just show +# the command. + +[macros] +(?su)[\\]?(?Plinkperf):(?P\S*?)\[(?P.*?)\]= + +[attributes] +asterisk=* +plus=+ +caret=^ +startsb=[ +endsb=] +tilde=~ + +ifdef::backend-docbook[] +[linkperf-inlinemacro] +{0%{target}} +{0#} +{0#{target}{0}} +{0#} +endif::backend-docbook[] + +ifdef::backend-docbook[] +ifndef::perf-asciidoc-no-roff[] +# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. +# v1.72 breaks with this because it replaces dots not in roff requests. +[listingblock] +{title} + +ifdef::doctype-manpage[] + .ft C +endif::doctype-manpage[] +| +ifdef::doctype-manpage[] + .ft +endif::doctype-manpage[] + +{title#} +endif::perf-asciidoc-no-roff[] + +ifdef::perf-asciidoc-no-roff[] +ifdef::doctype-manpage[] +# The following two small workarounds insert a simple paragraph after screen +[listingblock] +{title} + +| + +{title#} + +[verseblock] +{title} +{title%} +{title#} +| + +{title#} +{title%} +endif::doctype-manpage[] +endif::perf-asciidoc-no-roff[] +endif::backend-docbook[] + +ifdef::doctype-manpage[] +ifdef::backend-docbook[] +[header] +template::[header-declarations] + + +{mantitle} +{manvolnum} +perf +{perf_version} +perf Manual + + + {manname} + {manpurpose} + +endif::backend-docbook[] +endif::doctype-manpage[] + +ifdef::backend-xhtml11[] +[linkperf-inlinemacro] +{target}{0?({0})} +endif::backend-xhtml11[] diff --git a/trunk/tools/perf/Documentation/manpage-1.72.xsl b/trunk/tools/perf/Documentation/manpage-1.72.xsl new file mode 100644 index 000000000000..b4d315cb8c47 --- /dev/null +++ b/trunk/tools/perf/Documentation/manpage-1.72.xsl @@ -0,0 +1,14 @@ + + + + + + +▓ +⌂ + + diff --git a/trunk/tools/perf/Documentation/manpage-base.xsl b/trunk/tools/perf/Documentation/manpage-base.xsl new file mode 100644 index 000000000000..a264fa616093 --- /dev/null +++ b/trunk/tools/perf/Documentation/manpage-base.xsl @@ -0,0 +1,35 @@ + + + + + + + + + + + + + + sp + + + + + + + + br + + + diff --git a/trunk/tools/perf/Documentation/manpage-bold-literal.xsl b/trunk/tools/perf/Documentation/manpage-bold-literal.xsl new file mode 100644 index 000000000000..608eb5df6281 --- /dev/null +++ b/trunk/tools/perf/Documentation/manpage-bold-literal.xsl @@ -0,0 +1,17 @@ + + + + + + + fB + + + fR + + + diff --git a/trunk/tools/perf/Documentation/manpage-normal.xsl b/trunk/tools/perf/Documentation/manpage-normal.xsl new file mode 100644 index 000000000000..a48f5b11f3dc --- /dev/null +++ b/trunk/tools/perf/Documentation/manpage-normal.xsl @@ -0,0 +1,13 @@ + + + + + + +\ +. + + diff --git a/trunk/tools/perf/Documentation/manpage-suppress-sp.xsl b/trunk/tools/perf/Documentation/manpage-suppress-sp.xsl new file mode 100644 index 000000000000..a63c7632a87d --- /dev/null +++ b/trunk/tools/perf/Documentation/manpage-suppress-sp.xsl @@ -0,0 +1,21 @@ + + + + + + + + + + + + + + + diff --git a/trunk/tools/perf/Documentation/perf-annotate.txt b/trunk/tools/perf/Documentation/perf-annotate.txt new file mode 100644 index 000000000000..c9dcade06831 --- /dev/null +++ b/trunk/tools/perf/Documentation/perf-annotate.txt @@ -0,0 +1,29 @@ +perf-annotate(1) +============== + +NAME +---- +perf-annotate - Read perf.data (created by perf record) and display annotated code + +SYNOPSIS +-------- +[verse] +'perf annotate' [-i | --input=file] symbol_name + +DESCRIPTION +----------- +This command reads the input file and displays an annotated version of the +code. If the object file has debug symbols then the source code will be +displayed alongside assembly code. + +If there is no debug info in the object, then annotated assembly is displayed. + +OPTIONS +------- +-i:: +--input=:: + Input file name. (default: perf.data) + +SEE ALSO +-------- +linkperf:perf-record[1] diff --git a/trunk/tools/perf/Documentation/perf-help.txt b/trunk/tools/perf/Documentation/perf-help.txt new file mode 100644 index 000000000000..514391818d1f --- /dev/null +++ b/trunk/tools/perf/Documentation/perf-help.txt @@ -0,0 +1,38 @@ +perf-help(1) +============ + +NAME +---- +perf-help - display help information about perf + +SYNOPSIS +-------- +'perf help' [-a|--all] [COMMAND] + +DESCRIPTION +----------- + +With no options and no COMMAND given, the synopsis of the 'perf' +command and a list of the most commonly used perf commands are printed +on the standard output. + +If the option '--all' or '-a' is given, then all available commands are +printed on the standard output. + +If a perf command is named, a manual page for that command is brought +up. The 'man' program is used by default for this purpose, but this +can be overridden by other options or configuration variables. + +Note that `perf --help ...` is identical to `perf help ...` because the +former is internally converted into the latter. + +OPTIONS +------- +-a:: +--all:: + Prints all the available commands on the standard output. This + option supersedes any other option. + +PERF +---- +Part of the linkperf:perf[1] suite diff --git a/trunk/tools/perf/Documentation/perf-list.txt b/trunk/tools/perf/Documentation/perf-list.txt new file mode 100644 index 000000000000..8290b9422668 --- /dev/null +++ b/trunk/tools/perf/Documentation/perf-list.txt @@ -0,0 +1,25 @@ +perf-list(1) +============ + +NAME +---- +perf-list - List all symbolic event types + +SYNOPSIS +-------- +[verse] +'perf list' + +DESCRIPTION +----------- +This command displays the symbolic event types which can be selected in the +various perf commands with the -e option. + +OPTIONS +------- +None + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-top[1], +linkperf:perf-record[1] diff --git a/trunk/tools/perf/Documentation/perf-record.txt b/trunk/tools/perf/Documentation/perf-record.txt new file mode 100644 index 000000000000..1dbc1eeb4c01 --- /dev/null +++ b/trunk/tools/perf/Documentation/perf-record.txt @@ -0,0 +1,42 @@ +perf-record(1) +============== + +NAME +---- +perf-record - Run a command and record its profile into perf.data + +SYNOPSIS +-------- +[verse] +'perf record' [-e | --event=EVENT] [-l] [-a] +'perf record' [-e | --event=EVENT] [-l] [-a] -- [] + +DESCRIPTION +----------- +This command runs a command and gathers a performance counter profile +from it, into perf.data - without displaying anything. + +This file can then be inspected later on, using 'perf report'. + + +OPTIONS +------- +...:: + Any command you can specify in a shell. + +-e:: +--event=:: + Select the PMU event. Selection can be a symbolic event name + (use 'perf list' to list all events) or a raw PMU + event (eventsel+umask) in the form of rNNN where NNN is a + hexadecimal event descriptor. + +-a:: + system-wide collection + +-l:: + scale counter values + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-list[1] diff --git a/trunk/tools/perf/Documentation/perf-report.txt b/trunk/tools/perf/Documentation/perf-report.txt new file mode 100644 index 000000000000..52d3fc6846a9 --- /dev/null +++ b/trunk/tools/perf/Documentation/perf-report.txt @@ -0,0 +1,26 @@ +perf-report(1) +============== + +NAME +---- +perf-report - Read perf.data (created by perf record) and display the profile + +SYNOPSIS +-------- +[verse] +'perf report' [-i | --input=file] + +DESCRIPTION +----------- +This command displays the performance counter profile information recorded +via perf report. + +OPTIONS +------- +-i:: +--input=:: + Input file name. (default: perf.data) + +SEE ALSO +-------- +linkperf:perf-stat[1] diff --git a/trunk/tools/perf/Documentation/perf-stat.txt b/trunk/tools/perf/Documentation/perf-stat.txt new file mode 100644 index 000000000000..c368a72721d7 --- /dev/null +++ b/trunk/tools/perf/Documentation/perf-stat.txt @@ -0,0 +1,66 @@ +perf-stat(1) +============ + +NAME +---- +perf-stat - Run a command and gather performance counter statistics + +SYNOPSIS +-------- +[verse] +'perf stat' [-e | --event=EVENT] [-l] [-a] +'perf stat' [-e | --event=EVENT] [-l] [-a] -- [] + +DESCRIPTION +----------- +This command runs a command and gathers performance counter statistics +from it. + + +OPTIONS +------- +...:: + Any command you can specify in a shell. + + +-e:: +--event=:: + Select the PMU event. Selection can be a symbolic event name + (use 'perf list' to list all events) or a raw PMU + event (eventsel+umask) in the form of rNNN where NNN is a + hexadecimal event descriptor. + +-i:: +--inherit:: + child tasks inherit counters +-p:: +--pid=:: + stat events on existing pid + +-a:: + system-wide collection + +-l:: + scale counter values + +EXAMPLES +-------- + +$ perf stat -- make -j + + Performance counter stats for 'make -j': + + 8117.370256 task clock ticks # 11.281 CPU utilization factor + 678 context switches # 0.000 M/sec + 133 CPU migrations # 0.000 M/sec + 235724 pagefaults # 0.029 M/sec + 24821162526 CPU cycles # 3057.784 M/sec + 18687303457 instructions # 2302.138 M/sec + 172158895 cache references # 21.209 M/sec + 27075259 cache misses # 3.335 M/sec + + Wall-clock time elapsed: 719.554352 msecs + +SEE ALSO +-------- +linkperf:perf-top[1], linkperf:perf-list[1] diff --git a/trunk/tools/perf/Documentation/perf-top.txt b/trunk/tools/perf/Documentation/perf-top.txt new file mode 100644 index 000000000000..539d01289725 --- /dev/null +++ b/trunk/tools/perf/Documentation/perf-top.txt @@ -0,0 +1,39 @@ +perf-top(1) +=========== + +NAME +---- +perf-top - Run a command and profile it + +SYNOPSIS +-------- +[verse] +'perf top' [-e | --event=EVENT] [-l] [-a] + +DESCRIPTION +----------- +This command runs a command and gathers a performance counter profile +from it. + + +OPTIONS +------- +...:: + Any command you can specify in a shell. + +-e:: +--event=:: + Select the PMU event. Selection can be a symbolic event name + (use 'perf list' to list all events) or a raw PMU + event (eventsel+umask) in the form of rNNN where NNN is a + hexadecimal event descriptor. + +-a:: + system-wide collection + +-l:: + scale counter values + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-list[1] diff --git a/trunk/tools/perf/Documentation/perf.txt b/trunk/tools/perf/Documentation/perf.txt new file mode 100644 index 000000000000..69c832557199 --- /dev/null +++ b/trunk/tools/perf/Documentation/perf.txt @@ -0,0 +1,24 @@ +perf(1) +======= + +NAME +---- +perf - Performance analysis tools for Linux + +SYNOPSIS +-------- +[verse] +'perf' [--version] [--help] COMMAND [ARGS] + +DESCRIPTION +----------- +Performance counters for Linux are are a new kernel-based subsystem +that provide a framework for all things performance analysis. It +covers hardware level (CPU/PMU, Performance Monitoring Unit) features +and software features (software counters, tracepoints) as well. + +SEE ALSO +-------- +linkperf:perf-stat[1], linkperf:perf-top[1], +linkperf:perf-record[1], linkperf:perf-report[1], +linkperf:perf-list[1] diff --git a/trunk/tools/perf/Makefile b/trunk/tools/perf/Makefile new file mode 100644 index 000000000000..0cbd5d6874ec --- /dev/null +++ b/trunk/tools/perf/Makefile @@ -0,0 +1,929 @@ +# The default target of this Makefile is... +all:: + +# Define V=1 to have a more verbose compile. +# +# Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf() +# or vsnprintf() return -1 instead of number of characters which would +# have been written to the final string if enough space had been available. +# +# Define FREAD_READS_DIRECTORIES if your are on a system which succeeds +# when attempting to read from an fopen'ed directory. +# +# Define NO_OPENSSL environment variable if you do not have OpenSSL. +# This also implies MOZILLA_SHA1. +# +# Define CURLDIR=/foo/bar if your curl header and library files are in +# /foo/bar/include and /foo/bar/lib directories. +# +# Define EXPATDIR=/foo/bar if your expat header and library files are in +# /foo/bar/include and /foo/bar/lib directories. +# +# Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent. +# +# Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks +# d_type in struct dirent (latest Cygwin -- will be fixed soonish). +# +# Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.) +# do not support the 'size specifiers' introduced by C99, namely ll, hh, +# j, z, t. (representing long long int, char, intmax_t, size_t, ptrdiff_t). +# some C compilers supported these specifiers prior to C99 as an extension. +# +# Define NO_STRCASESTR if you don't have strcasestr. +# +# Define NO_MEMMEM if you don't have memmem. +# +# Define NO_STRTOUMAX if you don't have strtoumax in the C library. +# If your compiler also does not support long long or does not have +# strtoull, define NO_STRTOULL. +# +# Define NO_SETENV if you don't have setenv in the C library. +# +# Define NO_UNSETENV if you don't have unsetenv in the C library. +# +# Define NO_MKDTEMP if you don't have mkdtemp in the C library. +# +# Define NO_SYS_SELECT_H if you don't have sys/select.h. +# +# Define NO_SYMLINK_HEAD if you never want .perf/HEAD to be a symbolic link. +# Enable it on Windows. By default, symrefs are still used. +# +# Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability +# tests. These tests take up a significant amount of the total test time +# but are not needed unless you plan to talk to SVN repos. +# +# Define NO_FINK if you are building on Darwin/Mac OS X, have Fink +# installed in /sw, but don't want PERF to link against any libraries +# installed there. If defined you may specify your own (or Fink's) +# include directories and library directories by defining CFLAGS +# and LDFLAGS appropriately. +# +# Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X, +# have DarwinPorts installed in /opt/local, but don't want PERF to +# link against any libraries installed there. If defined you may +# specify your own (or DarwinPort's) include directories and +# library directories by defining CFLAGS and LDFLAGS appropriately. +# +# Define PPC_SHA1 environment variable when running make to make use of +# a bundled SHA1 routine optimized for PowerPC. +# +# Define ARM_SHA1 environment variable when running make to make use of +# a bundled SHA1 routine optimized for ARM. +# +# Define MOZILLA_SHA1 environment variable when running make to make use of +# a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast +# on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default +# choice) has very fast version optimized for i586. +# +# Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin). +# +# Define NEEDS_LIBICONV if linking with libc is not enough (Darwin). +# +# Define NEEDS_SOCKET if linking with libc is not enough (SunOS, +# Patrick Mauritz). +# +# Define NO_MMAP if you want to avoid mmap. +# +# Define NO_PTHREADS if you do not have or do not want to use Pthreads. +# +# Define NO_PREAD if you have a problem with pread() system call (e.g. +# cygwin.dll before v1.5.22). +# +# Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is +# generally faster on your platform than accessing the working directory. +# +# Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support +# the executable mode bit, but doesn't really do so. +# +# Define NO_IPV6 if you lack IPv6 support and getaddrinfo(). +# +# Define NO_SOCKADDR_STORAGE if your platform does not have struct +# sockaddr_storage. +# +# Define NO_ICONV if your libc does not properly support iconv. +# +# Define OLD_ICONV if your library has an old iconv(), where the second +# (input buffer pointer) parameter is declared with type (const char **). +# +# Define NO_DEFLATE_BOUND if your zlib does not have deflateBound. +# +# Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib" +# that tells runtime paths to dynamic libraries; +# "-Wl,-rpath=/path/lib" is used instead. +# +# Define USE_NSEC below if you want perf to care about sub-second file mtimes +# and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and +# it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely +# randomly break unless your underlying filesystem supports those sub-second +# times (my ext3 doesn't). +# +# Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of +# "st_ctim" +# +# Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec" +# available. This automatically turns USE_NSEC off. +# +# Define USE_STDEV below if you want perf to care about the underlying device +# change being considered an inode change from the update-index perspective. +# +# Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks +# field that counts the on-disk footprint in 512-byte blocks. +# +# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8 +# +# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72. +# +# Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's +# MakeMaker (e.g. using ActiveState under Cygwin). +# +# Define NO_PERL if you do not want Perl scripts or libraries at all. +# +# Define INTERNAL_QSORT to use Git's implementation of qsort(), which +# is a simplified version of the merge sort used in glibc. This is +# recommended if Git triggers O(n^2) behavior in your platform's qsort(). +# +# Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call +# your external grep (e.g., if your system lacks grep, if its grep is +# broken, or spawning external process is slower than built-in grep perf has). + +PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE + @$(SHELL_PATH) util/PERF-VERSION-GEN +-include PERF-VERSION-FILE + +uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not') +uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not') +uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not') +uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not') +uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not') +uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not') + +# CFLAGS and LDFLAGS are for the users to override from the command line. + +CFLAGS = -ggdb3 -Wall -Werror -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -O6 +LDFLAGS = -lpthread -lrt -lelf +ALL_CFLAGS = $(CFLAGS) +ALL_LDFLAGS = $(LDFLAGS) +STRIP ?= strip + +# Among the variables below, these: +# perfexecdir +# template_dir +# mandir +# infodir +# htmldir +# ETC_PERFCONFIG (but not sysconfdir) +# can be specified as a relative path some/where/else; +# this is interpreted as relative to $(prefix) and "perf" at +# runtime figures out where they are based on the path to the executable. +# This can help installing the suite in a relocatable way. + +prefix = $(HOME) +bindir_relative = bin +bindir = $(prefix)/$(bindir_relative) +mandir = share/man +infodir = share/info +perfexecdir = libexec/perf-core +sharedir = $(prefix)/share +template_dir = share/perf-core/templates +htmldir = share/doc/perf-doc +ifeq ($(prefix),/usr) +sysconfdir = /etc +ETC_PERFCONFIG = $(sysconfdir)/perfconfig +else +sysconfdir = $(prefix)/etc +ETC_PERFCONFIG = etc/perfconfig +endif +lib = lib +# DESTDIR= + +export prefix bindir sharedir sysconfdir + +CC = gcc +AR = ar +RM = rm -f +TAR = tar +FIND = find +INSTALL = install +RPMBUILD = rpmbuild +PTHREAD_LIBS = -lpthread + +# sparse is architecture-neutral, which means that we need to tell it +# explicitly what architecture to check for. Fix this up for yours.. +SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__ + + + +### --- END CONFIGURATION SECTION --- + +# Those must not be GNU-specific; they are shared with perl/ which may +# be built by a different compiler. (Note that this is an artifact now +# but it still might be nice to keep that distinction.) +BASIC_CFLAGS = +BASIC_LDFLAGS = + +# Guard against environment variables +BUILTIN_OBJS = +BUILT_INS = +COMPAT_CFLAGS = +COMPAT_OBJS = +LIB_H = +LIB_OBJS = +SCRIPT_PERL = +SCRIPT_SH = +TEST_PROGRAMS = + +# +# No scripts right now: +# + +# SCRIPT_SH += perf-am.sh + +# +# No Perl scripts right now: +# + +# SCRIPT_PERL += perf-add--interactive.perl + +SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \ + $(patsubst %.perl,%,$(SCRIPT_PERL)) + +# Empty... +EXTRA_PROGRAMS = + +# ... and all the rest that could be moved out of bindir to perfexecdir +PROGRAMS += $(EXTRA_PROGRAMS) + +# +# Single 'perf' binary right now: +# +PROGRAMS += perf + +# List built-in command $C whose implementation cmd_$C() is not in +# builtin-$C.o but is linked in as part of some other command. +# +# None right now: +# +# BUILT_INS += perf-init $X + +# what 'all' will build and 'install' will install, in perfexecdir +ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS) + +# what 'all' will build but not install in perfexecdir +OTHER_PROGRAMS = perf$X + +# Set paths to tools early so that they can be used for version tests. +ifndef SHELL_PATH + SHELL_PATH = /bin/sh +endif +ifndef PERL_PATH + PERL_PATH = /usr/bin/perl +endif + +export PERL_PATH + +LIB_FILE=libperf.a + +LIB_H += ../../include/linux/perf_counter.h +LIB_H += perf.h +LIB_H += util/list.h +LIB_H += util/rbtree.h +LIB_H += util/levenshtein.h +LIB_H += util/parse-options.h +LIB_H += util/parse-events.h +LIB_H += util/quote.h +LIB_H += util/util.h +LIB_H += util/help.h +LIB_H += util/strbuf.h +LIB_H += util/string.h +LIB_H += util/run-command.h +LIB_H += util/sigchain.h +LIB_H += util/symbol.h +LIB_H += util/color.h + +LIB_OBJS += util/abspath.o +LIB_OBJS += util/alias.o +LIB_OBJS += util/config.o +LIB_OBJS += util/ctype.o +LIB_OBJS += util/environment.o +LIB_OBJS += util/exec_cmd.o +LIB_OBJS += util/help.o +LIB_OBJS += util/levenshtein.o +LIB_OBJS += util/parse-options.o +LIB_OBJS += util/parse-events.o +LIB_OBJS += util/path.o +LIB_OBJS += util/rbtree.o +LIB_OBJS += util/run-command.o +LIB_OBJS += util/quote.o +LIB_OBJS += util/strbuf.o +LIB_OBJS += util/string.o +LIB_OBJS += util/usage.o +LIB_OBJS += util/wrapper.o +LIB_OBJS += util/sigchain.o +LIB_OBJS += util/symbol.o +LIB_OBJS += util/color.o +LIB_OBJS += util/pager.o + +BUILTIN_OBJS += builtin-annotate.o +BUILTIN_OBJS += builtin-help.o +BUILTIN_OBJS += builtin-list.o +BUILTIN_OBJS += builtin-record.o +BUILTIN_OBJS += builtin-report.o +BUILTIN_OBJS += builtin-stat.o +BUILTIN_OBJS += builtin-top.o + +PERFLIBS = $(LIB_FILE) +EXTLIBS = + +# +# Platform specific tweaks +# + +# We choose to avoid "if .. else if .. else .. endif endif" +# because maintaining the nesting to match is a pain. If +# we had "elif" things would have been much nicer... + +-include config.mak.autogen +-include config.mak + +ifeq ($(uname_S),Darwin) + ifndef NO_FINK + ifeq ($(shell test -d /sw/lib && echo y),y) + BASIC_CFLAGS += -I/sw/include + BASIC_LDFLAGS += -L/sw/lib + endif + endif + ifndef NO_DARWIN_PORTS + ifeq ($(shell test -d /opt/local/lib && echo y),y) + BASIC_CFLAGS += -I/opt/local/include + BASIC_LDFLAGS += -L/opt/local/lib + endif + endif + PTHREAD_LIBS = +endif + +ifndef CC_LD_DYNPATH + ifdef NO_R_TO_GCC_LINKER + # Some gcc does not accept and pass -R to the linker to specify + # the runtime dynamic library path. + CC_LD_DYNPATH = -Wl,-rpath, + else + CC_LD_DYNPATH = -R + endif +endif + +ifdef ZLIB_PATH + BASIC_CFLAGS += -I$(ZLIB_PATH)/include + EXTLIBS += -L$(ZLIB_PATH)/$(lib) $(CC_LD_DYNPATH)$(ZLIB_PATH)/$(lib) +endif +EXTLIBS += -lz + +ifdef NEEDS_SOCKET + EXTLIBS += -lsocket +endif +ifdef NEEDS_NSL + EXTLIBS += -lnsl +endif +ifdef NO_D_TYPE_IN_DIRENT + BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT +endif +ifdef NO_D_INO_IN_DIRENT + BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT +endif +ifdef NO_ST_BLOCKS_IN_STRUCT_STAT + BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT +endif +ifdef USE_NSEC + BASIC_CFLAGS += -DUSE_NSEC +endif +ifdef USE_ST_TIMESPEC + BASIC_CFLAGS += -DUSE_ST_TIMESPEC +endif +ifdef NO_NSEC + BASIC_CFLAGS += -DNO_NSEC +endif +ifdef NO_C99_FORMAT + BASIC_CFLAGS += -DNO_C99_FORMAT +endif +ifdef SNPRINTF_RETURNS_BOGUS + COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS + COMPAT_OBJS += compat/snprintf.o +endif +ifdef FREAD_READS_DIRECTORIES + COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES + COMPAT_OBJS += compat/fopen.o +endif +ifdef NO_SYMLINK_HEAD + BASIC_CFLAGS += -DNO_SYMLINK_HEAD +endif +ifdef NO_STRCASESTR + COMPAT_CFLAGS += -DNO_STRCASESTR + COMPAT_OBJS += compat/strcasestr.o +endif +ifdef NO_STRTOUMAX + COMPAT_CFLAGS += -DNO_STRTOUMAX + COMPAT_OBJS += compat/strtoumax.o +endif +ifdef NO_STRTOULL + COMPAT_CFLAGS += -DNO_STRTOULL +endif +ifdef NO_SETENV + COMPAT_CFLAGS += -DNO_SETENV + COMPAT_OBJS += compat/setenv.o +endif +ifdef NO_MKDTEMP + COMPAT_CFLAGS += -DNO_MKDTEMP + COMPAT_OBJS += compat/mkdtemp.o +endif +ifdef NO_UNSETENV + COMPAT_CFLAGS += -DNO_UNSETENV + COMPAT_OBJS += compat/unsetenv.o +endif +ifdef NO_SYS_SELECT_H + BASIC_CFLAGS += -DNO_SYS_SELECT_H +endif +ifdef NO_MMAP + COMPAT_CFLAGS += -DNO_MMAP + COMPAT_OBJS += compat/mmap.o +else + ifdef USE_WIN32_MMAP + COMPAT_CFLAGS += -DUSE_WIN32_MMAP + COMPAT_OBJS += compat/win32mmap.o + endif +endif +ifdef NO_PREAD + COMPAT_CFLAGS += -DNO_PREAD + COMPAT_OBJS += compat/pread.o +endif +ifdef NO_FAST_WORKING_DIRECTORY + BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY +endif +ifdef NO_TRUSTABLE_FILEMODE + BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE +endif +ifdef NO_IPV6 + BASIC_CFLAGS += -DNO_IPV6 +endif +ifdef NO_UINTMAX_T + BASIC_CFLAGS += -Duintmax_t=uint32_t +endif +ifdef NO_SOCKADDR_STORAGE +ifdef NO_IPV6 + BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in +else + BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6 +endif +endif +ifdef NO_INET_NTOP + LIB_OBJS += compat/inet_ntop.o +endif +ifdef NO_INET_PTON + LIB_OBJS += compat/inet_pton.o +endif + +ifdef NO_ICONV + BASIC_CFLAGS += -DNO_ICONV +endif + +ifdef OLD_ICONV + BASIC_CFLAGS += -DOLD_ICONV +endif + +ifdef NO_DEFLATE_BOUND + BASIC_CFLAGS += -DNO_DEFLATE_BOUND +endif + +ifdef PPC_SHA1 + SHA1_HEADER = "ppc/sha1.h" + LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o +else +ifdef ARM_SHA1 + SHA1_HEADER = "arm/sha1.h" + LIB_OBJS += arm/sha1.o arm/sha1_arm.o +else +ifdef MOZILLA_SHA1 + SHA1_HEADER = "mozilla-sha1/sha1.h" + LIB_OBJS += mozilla-sha1/sha1.o +else + SHA1_HEADER = + EXTLIBS += $(LIB_4_CRYPTO) +endif +endif +endif +ifdef NO_PERL_MAKEMAKER + export NO_PERL_MAKEMAKER +endif +ifdef NO_HSTRERROR + COMPAT_CFLAGS += -DNO_HSTRERROR + COMPAT_OBJS += compat/hstrerror.o +endif +ifdef NO_MEMMEM + COMPAT_CFLAGS += -DNO_MEMMEM + COMPAT_OBJS += compat/memmem.o +endif +ifdef INTERNAL_QSORT + COMPAT_CFLAGS += -DINTERNAL_QSORT + COMPAT_OBJS += compat/qsort.o +endif +ifdef RUNTIME_PREFIX + COMPAT_CFLAGS += -DRUNTIME_PREFIX +endif + +ifdef DIR_HAS_BSD_GROUP_SEMANTICS + COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS +endif +ifdef NO_EXTERNAL_GREP + BASIC_CFLAGS += -DNO_EXTERNAL_GREP +endif + +ifeq ($(PERL_PATH),) +NO_PERL=NoThanks +endif + +QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(findstring $(MAKEFLAGS),w),w) +PRINT_DIR = --no-print-directory +else # "make -w" +NO_SUBDIR = : +endif + +ifneq ($(findstring $(MAKEFLAGS),s),s) +ifndef V + QUIET_CC = @echo ' ' CC $@; + QUIET_AR = @echo ' ' AR $@; + QUIET_LINK = @echo ' ' LINK $@; + QUIET_BUILT_IN = @echo ' ' BUILTIN $@; + QUIET_GEN = @echo ' ' GEN $@; + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir + export V + export QUIET_GEN + export QUIET_BUILT_IN +endif +endif + +ifdef ASCIIDOC8 + export ASCIIDOC8 +endif + +# Shell quote (do not use $(call) to accommodate ancient setups); + +SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER)) +ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG)) + +DESTDIR_SQ = $(subst ','\'',$(DESTDIR)) +bindir_SQ = $(subst ','\'',$(bindir)) +bindir_relative_SQ = $(subst ','\'',$(bindir_relative)) +mandir_SQ = $(subst ','\'',$(mandir)) +infodir_SQ = $(subst ','\'',$(infodir)) +perfexecdir_SQ = $(subst ','\'',$(perfexecdir)) +template_dir_SQ = $(subst ','\'',$(template_dir)) +htmldir_SQ = $(subst ','\'',$(htmldir)) +prefix_SQ = $(subst ','\'',$(prefix)) + +SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) +PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH)) + +LIBS = $(PERFLIBS) $(EXTLIBS) + +BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \ + $(COMPAT_CFLAGS) +LIB_OBJS += $(COMPAT_OBJS) + +ALL_CFLAGS += $(BASIC_CFLAGS) +ALL_LDFLAGS += $(BASIC_LDFLAGS) + +export TAR INSTALL DESTDIR SHELL_PATH + + +### Build rules + +SHELL = $(SHELL_PATH) + +all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS +ifneq (,$X) + $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';) +endif + +all:: + +please_set_SHELL_PATH_to_a_more_modern_shell: + @$$(:) + +shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell + +strip: $(PROGRAMS) perf$X + $(STRIP) $(STRIP_OPTS) $(PROGRAMS) perf$X + +perf.o: perf.c common-cmds.h PERF-CFLAGS + $(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \ + '-DPERF_HTML_PATH="$(htmldir_SQ)"' \ + $(ALL_CFLAGS) -c $(filter %.c,$^) + +perf$X: perf.o $(BUILTIN_OBJS) $(PERFLIBS) + $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ perf.o \ + $(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS) + +builtin-help.o: builtin-help.c common-cmds.h PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) \ + '-DPERF_HTML_PATH="$(htmldir_SQ)"' \ + '-DPERF_MAN_PATH="$(mandir_SQ)"' \ + '-DPERF_INFO_PATH="$(infodir_SQ)"' $< + +$(BUILT_INS): perf$X + $(QUIET_BUILT_IN)$(RM) $@ && \ + ln perf$X $@ 2>/dev/null || \ + ln -s perf$X $@ 2>/dev/null || \ + cp perf$X $@ + +common-cmds.h: util/generate-cmdlist.sh command-list.txt + +common-cmds.h: $(wildcard Documentation/perf-*.txt) + $(QUIET_GEN)util/generate-cmdlist.sh > $@+ && mv $@+ $@ + +$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh + $(QUIET_GEN)$(RM) $@ $@+ && \ + sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \ + -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \ + -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \ + -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \ + -e 's/@@NO_CURL@@/$(NO_CURL)/g' \ + $@.sh >$@+ && \ + chmod +x $@+ && \ + mv $@+ $@ + +configure: configure.ac + $(QUIET_GEN)$(RM) $@ $<+ && \ + sed -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \ + $< > $<+ && \ + autoconf -o $@ $<+ && \ + $(RM) $<+ + +# These can record PERF_VERSION +perf.o perf.spec \ + $(patsubst %.sh,%,$(SCRIPT_SH)) \ + $(patsubst %.perl,%,$(SCRIPT_PERL)) \ + : PERF-VERSION-FILE + +%.o: %.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $< +%.s: %.c PERF-CFLAGS + $(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $< +%.o: %.S + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $< + +util/exec_cmd.o: util/exec_cmd.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) \ + '-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \ + '-DBINDIR="$(bindir_relative_SQ)"' \ + '-DPREFIX="$(prefix_SQ)"' \ + $< + +builtin-init-db.o: builtin-init-db.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DDEFAULT_PERF_TEMPLATE_DIR='"$(template_dir_SQ)"' $< + +util/config.o: util/config.c PERF-CFLAGS + $(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $< + +perf-%$X: %.o $(PERFLIBS) + $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS) + +$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H) +$(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h) +builtin-revert.o wt-status.o: wt-status.h + +$(LIB_FILE): $(LIB_OBJS) + $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS) + +doc: + $(MAKE) -C Documentation all + +man: + $(MAKE) -C Documentation man + +html: + $(MAKE) -C Documentation html + +info: + $(MAKE) -C Documentation info + +pdf: + $(MAKE) -C Documentation pdf + +TAGS: + $(RM) TAGS + $(FIND) . -name '*.[hcS]' -print | xargs etags -a + +tags: + $(RM) tags + $(FIND) . -name '*.[hcS]' -print | xargs ctags -a + +cscope: + $(RM) cscope* + $(FIND) . -name '*.[hcS]' -print | xargs cscope -b + +### Detect prefix changes +TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\ + $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ) + +PERF-CFLAGS: .FORCE-PERF-CFLAGS + @FLAGS='$(TRACK_CFLAGS)'; \ + if test x"$$FLAGS" != x"`cat PERF-CFLAGS 2>/dev/null`" ; then \ + echo 1>&2 " * new build flags or prefix"; \ + echo "$$FLAGS" >PERF-CFLAGS; \ + fi + +# We need to apply sq twice, once to protect from the shell +# that runs PERF-BUILD-OPTIONS, and then again to protect it +# and the first level quoting from the shell that runs "echo". +PERF-BUILD-OPTIONS: .FORCE-PERF-BUILD-OPTIONS + @echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@ + @echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@ + @echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@ + @echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@ + +### Testing rules + +# +# None right now: +# +# TEST_PROGRAMS += test-something$X + +all:: $(TEST_PROGRAMS) + +# GNU make supports exporting all variables by "export" without parameters. +# However, the environment gets quite big, and some programs have problems +# with that. + +export NO_SVN_TESTS + +check: common-cmds.h + if sparse; \ + then \ + for i in *.c */*.c; \ + do \ + sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \ + done; \ + else \ + echo 2>&1 "Did you mean 'make test'?"; \ + exit 1; \ + fi + +remove-dashes: + ./fixup-builtins $(BUILT_INS) $(PROGRAMS) $(SCRIPTS) + +### Installation rules + +ifneq ($(filter /%,$(firstword $(template_dir))),) +template_instdir = $(template_dir) +else +template_instdir = $(prefix)/$(template_dir) +endif +export template_instdir + +ifneq ($(filter /%,$(firstword $(perfexecdir))),) +perfexec_instdir = $(perfexecdir) +else +perfexec_instdir = $(prefix)/$(perfexecdir) +endif +perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir)) +export perfexec_instdir + +install: all + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)' + $(INSTALL) perf$X '$(DESTDIR_SQ)$(bindir_SQ)' +ifdef BUILT_INS + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' + $(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' +ifneq (,$X) + $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), $(RM) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/$p';) +endif +endif + +install-doc: + $(MAKE) -C Documentation install + +install-man: + $(MAKE) -C Documentation install-man + +install-html: + $(MAKE) -C Documentation install-html + +install-info: + $(MAKE) -C Documentation install-info + +install-pdf: + $(MAKE) -C Documentation install-pdf + +quick-install-doc: + $(MAKE) -C Documentation quick-install + +quick-install-man: + $(MAKE) -C Documentation quick-install-man + +quick-install-html: + $(MAKE) -C Documentation quick-install-html + + +### Maintainer's dist rules +# +# None right now +# +# +# perf.spec: perf.spec.in +# sed -e 's/@@VERSION@@/$(PERF_VERSION)/g' < $< > $@+ +# mv $@+ $@ +# +# PERF_TARNAME=perf-$(PERF_VERSION) +# dist: perf.spec perf-archive$(X) configure +# ./perf-archive --format=tar \ +# --prefix=$(PERF_TARNAME)/ HEAD^{tree} > $(PERF_TARNAME).tar +# @mkdir -p $(PERF_TARNAME) +# @cp perf.spec configure $(PERF_TARNAME) +# @echo $(PERF_VERSION) > $(PERF_TARNAME)/version +# $(TAR) rf $(PERF_TARNAME).tar \ +# $(PERF_TARNAME)/perf.spec \ +# $(PERF_TARNAME)/configure \ +# $(PERF_TARNAME)/version +# @$(RM) -r $(PERF_TARNAME) +# gzip -f -9 $(PERF_TARNAME).tar +# +# htmldocs = perf-htmldocs-$(PERF_VERSION) +# manpages = perf-manpages-$(PERF_VERSION) +# dist-doc: +# $(RM) -r .doc-tmp-dir +# mkdir .doc-tmp-dir +# $(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc +# cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar . +# gzip -n -9 -f $(htmldocs).tar +# : +# $(RM) -r .doc-tmp-dir +# mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7 +# $(MAKE) -C Documentation DESTDIR=./ \ +# man1dir=../.doc-tmp-dir/man1 \ +# man5dir=../.doc-tmp-dir/man5 \ +# man7dir=../.doc-tmp-dir/man7 \ +# install +# cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar . +# gzip -n -9 -f $(manpages).tar +# $(RM) -r .doc-tmp-dir +# +# rpm: dist +# $(RPMBUILD) -ta $(PERF_TARNAME).tar.gz + +### Cleaning rules + +distclean: clean +# $(RM) configure + +clean: + $(RM) *.o */*.o $(LIB_FILE) + $(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X + $(RM) $(TEST_PROGRAMS) + $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope* + $(RM) -r autom4te.cache + $(RM) config.log config.mak.autogen config.mak.append config.status config.cache + $(RM) -r $(PERF_TARNAME) .doc-tmp-dir + $(RM) $(PERF_TARNAME).tar.gz perf-core_$(PERF_VERSION)-*.tar.gz + $(RM) $(htmldocs).tar.gz $(manpages).tar.gz + $(MAKE) -C Documentation/ clean + $(RM) PERF-VERSION-FILE PERF-CFLAGS PERF-BUILD-OPTIONS + +.PHONY: all install clean strip +.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell +.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS +.PHONY: .FORCE-PERF-BUILD-OPTIONS + +### Make sure built-ins do not have dups and listed in perf.c +# +check-builtins:: + ./check-builtins.sh + +### Test suite coverage testing +# +# None right now +# +# .PHONY: coverage coverage-clean coverage-build coverage-report +# +# coverage: +# $(MAKE) coverage-build +# $(MAKE) coverage-report +# +# coverage-clean: +# rm -f *.gcda *.gcno +# +# COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs +# COVERAGE_LDFLAGS = $(CFLAGS) -O0 -lgcov +# +# coverage-build: coverage-clean +# $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all +# $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \ +# -j1 test +# +# coverage-report: +# gcov -b *.c */*.c +# grep '^function.*called 0 ' *.c.gcov */*.c.gcov \ +# | sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \ +# | tee coverage-untested-functions diff --git a/trunk/tools/perf/builtin-annotate.c b/trunk/tools/perf/builtin-annotate.c new file mode 100644 index 000000000000..b1ed5f766cb3 --- /dev/null +++ b/trunk/tools/perf/builtin-annotate.c @@ -0,0 +1,1356 @@ +/* + * builtin-annotate.c + * + * Builtin annotate command: Analyze the perf.data input file, + * look up and read DSOs and symbol information and display + * a histogram of results, along various sorting keys. + */ +#include "builtin.h" + +#include "util/util.h" + +#include "util/color.h" +#include "util/list.h" +#include "util/cache.h" +#include "util/rbtree.h" +#include "util/symbol.h" +#include "util/string.h" + +#include "perf.h" + +#include "util/parse-options.h" +#include "util/parse-events.h" + +#define SHOW_KERNEL 1 +#define SHOW_USER 2 +#define SHOW_HV 4 + +static char const *input_name = "perf.data"; +static char *vmlinux = "vmlinux"; + +static char default_sort_order[] = "comm,symbol"; +static char *sort_order = default_sort_order; + +static int input; +static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV; + +static int dump_trace = 0; +#define dprintf(x...) do { if (dump_trace) printf(x); } while (0) + +static int verbose; + +static unsigned long page_size; +static unsigned long mmap_window = 32; + +struct ip_event { + struct perf_event_header header; + __u64 ip; + __u32 pid, tid; +}; + +struct mmap_event { + struct perf_event_header header; + __u32 pid, tid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; +}; + +struct comm_event { + struct perf_event_header header; + __u32 pid, tid; + char comm[16]; +}; + +struct fork_event { + struct perf_event_header header; + __u32 pid, ppid; +}; + +struct period_event { + struct perf_event_header header; + __u64 time; + __u64 id; + __u64 sample_period; +}; + +typedef union event_union { + struct perf_event_header header; + struct ip_event ip; + struct mmap_event mmap; + struct comm_event comm; + struct fork_event fork; + struct period_event period; +} event_t; + +static LIST_HEAD(dsos); +static struct dso *kernel_dso; +static struct dso *vdso; + + +static void dsos__add(struct dso *dso) +{ + list_add_tail(&dso->node, &dsos); +} + +static struct dso *dsos__find(const char *name) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + if (strcmp(pos->name, name) == 0) + return pos; + return NULL; +} + +static struct dso *dsos__findnew(const char *name) +{ + struct dso *dso = dsos__find(name); + int nr; + + if (dso) + return dso; + + dso = dso__new(name, 0); + if (!dso) + goto out_delete_dso; + + nr = dso__load(dso, NULL, verbose); + if (nr < 0) { + if (verbose) + fprintf(stderr, "Failed to open: %s\n", name); + goto out_delete_dso; + } + if (!nr && verbose) { + fprintf(stderr, + "No symbols found in: %s, maybe install a debug package?\n", + name); + } + + dsos__add(dso); + + return dso; + +out_delete_dso: + dso__delete(dso); + return NULL; +} + +static void dsos__fprintf(FILE *fp) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + dso__fprintf(pos, fp); +} + +static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip) +{ + return dso__find_symbol(kernel_dso, ip); +} + +static int load_kernel(void) +{ + int err; + + kernel_dso = dso__new("[kernel]", 0); + if (!kernel_dso) + return -1; + + err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose); + if (err) { + dso__delete(kernel_dso); + kernel_dso = NULL; + } else + dsos__add(kernel_dso); + + vdso = dso__new("[vdso]", 0); + if (!vdso) + return -1; + + vdso->find_symbol = vdso__find_symbol; + + dsos__add(vdso); + + return err; +} + +struct map { + struct list_head node; + __u64 start; + __u64 end; + __u64 pgoff; + __u64 (*map_ip)(struct map *, __u64); + struct dso *dso; +}; + +static __u64 map__map_ip(struct map *map, __u64 ip) +{ + return ip - map->start + map->pgoff; +} + +static __u64 vdso__map_ip(struct map *map, __u64 ip) +{ + return ip; +} + +static struct map *map__new(struct mmap_event *event) +{ + struct map *self = malloc(sizeof(*self)); + + if (self != NULL) { + const char *filename = event->filename; + + self->start = event->start; + self->end = event->start + event->len; + self->pgoff = event->pgoff; + + self->dso = dsos__findnew(filename); + if (self->dso == NULL) + goto out_delete; + + if (self->dso == vdso) + self->map_ip = vdso__map_ip; + else + self->map_ip = map__map_ip; + } + return self; +out_delete: + free(self); + return NULL; +} + +static struct map *map__clone(struct map *self) +{ + struct map *map = malloc(sizeof(*self)); + + if (!map) + return NULL; + + memcpy(map, self, sizeof(*self)); + + return map; +} + +static int map__overlap(struct map *l, struct map *r) +{ + if (l->start > r->start) { + struct map *t = l; + l = r; + r = t; + } + + if (l->end > r->start) + return 1; + + return 0; +} + +static size_t map__fprintf(struct map *self, FILE *fp) +{ + return fprintf(fp, " %Lx-%Lx %Lx %s\n", + self->start, self->end, self->pgoff, self->dso->name); +} + + +struct thread { + struct rb_node rb_node; + struct list_head maps; + pid_t pid; + char *comm; +}; + +static struct thread *thread__new(pid_t pid) +{ + struct thread *self = malloc(sizeof(*self)); + + if (self != NULL) { + self->pid = pid; + self->comm = malloc(32); + if (self->comm) + snprintf(self->comm, 32, ":%d", self->pid); + INIT_LIST_HEAD(&self->maps); + } + + return self; +} + +static int thread__set_comm(struct thread *self, const char *comm) +{ + if (self->comm) + free(self->comm); + self->comm = strdup(comm); + return self->comm ? 0 : -ENOMEM; +} + +static size_t thread__fprintf(struct thread *self, FILE *fp) +{ + struct map *pos; + size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm); + + list_for_each_entry(pos, &self->maps, node) + ret += map__fprintf(pos, fp); + + return ret; +} + + +static struct rb_root threads; +static struct thread *last_match; + +static struct thread *threads__findnew(pid_t pid) +{ + struct rb_node **p = &threads.rb_node; + struct rb_node *parent = NULL; + struct thread *th; + + /* + * Font-end cache - PID lookups come in blocks, + * so most of the time we dont have to look up + * the full rbtree: + */ + if (last_match && last_match->pid == pid) + return last_match; + + while (*p != NULL) { + parent = *p; + th = rb_entry(parent, struct thread, rb_node); + + if (th->pid == pid) { + last_match = th; + return th; + } + + if (pid < th->pid) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + th = thread__new(pid); + if (th != NULL) { + rb_link_node(&th->rb_node, parent, p); + rb_insert_color(&th->rb_node, &threads); + last_match = th; + } + + return th; +} + +static void thread__insert_map(struct thread *self, struct map *map) +{ + struct map *pos, *tmp; + + list_for_each_entry_safe(pos, tmp, &self->maps, node) { + if (map__overlap(pos, map)) { + list_del_init(&pos->node); + /* XXX leaks dsos */ + free(pos); + } + } + + list_add_tail(&map->node, &self->maps); +} + +static int thread__fork(struct thread *self, struct thread *parent) +{ + struct map *map; + + if (self->comm) + free(self->comm); + self->comm = strdup(parent->comm); + if (!self->comm) + return -ENOMEM; + + list_for_each_entry(map, &parent->maps, node) { + struct map *new = map__clone(map); + if (!new) + return -ENOMEM; + thread__insert_map(self, new); + } + + return 0; +} + +static struct map *thread__find_map(struct thread *self, __u64 ip) +{ + struct map *pos; + + if (self == NULL) + return NULL; + + list_for_each_entry(pos, &self->maps, node) + if (ip >= pos->start && ip <= pos->end) + return pos; + + return NULL; +} + +static size_t threads__fprintf(FILE *fp) +{ + size_t ret = 0; + struct rb_node *nd; + + for (nd = rb_first(&threads); nd; nd = rb_next(nd)) { + struct thread *pos = rb_entry(nd, struct thread, rb_node); + + ret += thread__fprintf(pos, fp); + } + + return ret; +} + +/* + * histogram, sorted on item, collects counts + */ + +static struct rb_root hist; + +struct hist_entry { + struct rb_node rb_node; + + struct thread *thread; + struct map *map; + struct dso *dso; + struct symbol *sym; + __u64 ip; + char level; + + uint32_t count; +}; + +/* + * configurable sorting bits + */ + +struct sort_entry { + struct list_head list; + + char *header; + + int64_t (*cmp)(struct hist_entry *, struct hist_entry *); + int64_t (*collapse)(struct hist_entry *, struct hist_entry *); + size_t (*print)(FILE *fp, struct hist_entry *); +}; + +/* --sort pid */ + +static int64_t +sort__thread_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static size_t +sort__thread_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid); +} + +static struct sort_entry sort_thread = { + .header = " Command: Pid", + .cmp = sort__thread_cmp, + .print = sort__thread_print, +}; + +/* --sort comm */ + +static int64_t +sort__comm_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static int64_t +sort__comm_collapse(struct hist_entry *left, struct hist_entry *right) +{ + char *comm_l = left->thread->comm; + char *comm_r = right->thread->comm; + + if (!comm_l || !comm_r) { + if (!comm_l && !comm_r) + return 0; + else if (!comm_l) + return -1; + else + return 1; + } + + return strcmp(comm_l, comm_r); +} + +static size_t +sort__comm_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s", self->thread->comm); +} + +static struct sort_entry sort_comm = { + .header = " Command", + .cmp = sort__comm_cmp, + .collapse = sort__comm_collapse, + .print = sort__comm_print, +}; + +/* --sort dso */ + +static int64_t +sort__dso_cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct dso *dso_l = left->dso; + struct dso *dso_r = right->dso; + + if (!dso_l || !dso_r) { + if (!dso_l && !dso_r) + return 0; + else if (!dso_l) + return -1; + else + return 1; + } + + return strcmp(dso_l->name, dso_r->name); +} + +static size_t +sort__dso_print(FILE *fp, struct hist_entry *self) +{ + if (self->dso) + return fprintf(fp, "%-25s", self->dso->name); + + return fprintf(fp, "%016llx ", (__u64)self->ip); +} + +static struct sort_entry sort_dso = { + .header = "Shared Object ", + .cmp = sort__dso_cmp, + .print = sort__dso_print, +}; + +/* --sort symbol */ + +static int64_t +sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) +{ + __u64 ip_l, ip_r; + + if (left->sym == right->sym) + return 0; + + ip_l = left->sym ? left->sym->start : left->ip; + ip_r = right->sym ? right->sym->start : right->ip; + + return (int64_t)(ip_r - ip_l); +} + +static size_t +sort__sym_print(FILE *fp, struct hist_entry *self) +{ + size_t ret = 0; + + if (verbose) + ret += fprintf(fp, "%#018llx ", (__u64)self->ip); + + if (self->sym) { + ret += fprintf(fp, "[%c] %s", + self->dso == kernel_dso ? 'k' : '.', self->sym->name); + } else { + ret += fprintf(fp, "%#016llx", (__u64)self->ip); + } + + return ret; +} + +static struct sort_entry sort_sym = { + .header = "Symbol", + .cmp = sort__sym_cmp, + .print = sort__sym_print, +}; + +static int sort__need_collapse = 0; + +struct sort_dimension { + char *name; + struct sort_entry *entry; + int taken; +}; + +static struct sort_dimension sort_dimensions[] = { + { .name = "pid", .entry = &sort_thread, }, + { .name = "comm", .entry = &sort_comm, }, + { .name = "dso", .entry = &sort_dso, }, + { .name = "symbol", .entry = &sort_sym, }, +}; + +static LIST_HEAD(hist_entry__sort_list); + +static int sort_dimension__add(char *tok) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) { + struct sort_dimension *sd = &sort_dimensions[i]; + + if (sd->taken) + continue; + + if (strncasecmp(tok, sd->name, strlen(tok))) + continue; + + if (sd->entry->collapse) + sort__need_collapse = 1; + + list_add_tail(&sd->entry->list, &hist_entry__sort_list); + sd->taken = 1; + + return 0; + } + + return -ESRCH; +} + +static int64_t +hist_entry__cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + cmp = se->cmp(left, right); + if (cmp) + break; + } + + return cmp; +} + +static int64_t +hist_entry__collapse(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + int64_t (*f)(struct hist_entry *, struct hist_entry *); + + f = se->collapse ?: se->cmp; + + cmp = f(left, right); + if (cmp) + break; + } + + return cmp; +} + +/* + * collect histogram counts + */ +static void hist_hit(struct hist_entry *he, __u64 ip) +{ + unsigned int sym_size, offset; + struct symbol *sym = he->sym; + + he->count++; + + if (!sym || !sym->hist) + return; + + sym_size = sym->end - sym->start; + offset = ip - sym->start; + + if (offset >= sym_size) + return; + + sym->hist_sum++; + sym->hist[offset]++; + + if (verbose >= 3) + printf("%p %s: count++ [ip: %p, %08Lx] => %Ld\n", + (void *)(unsigned long)he->sym->start, + he->sym->name, + (void *)(unsigned long)ip, ip - he->sym->start, + sym->hist[offset]); +} + +static int +hist_entry__add(struct thread *thread, struct map *map, struct dso *dso, + struct symbol *sym, __u64 ip, char level) +{ + struct rb_node **p = &hist.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *he; + struct hist_entry entry = { + .thread = thread, + .map = map, + .dso = dso, + .sym = sym, + .ip = ip, + .level = level, + .count = 1, + }; + int cmp; + + while (*p != NULL) { + parent = *p; + he = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__cmp(&entry, he); + + if (!cmp) { + hist_hit(he, ip); + + return 0; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + he = malloc(sizeof(*he)); + if (!he) + return -ENOMEM; + *he = entry; + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &hist); + + return 0; +} + +static void hist_entry__free(struct hist_entry *he) +{ + free(he); +} + +/* + * collapse the histogram + */ + +static struct rb_root collapse_hists; + +static void collapse__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &collapse_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + int64_t cmp; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__collapse(iter, he); + + if (!cmp) { + iter->count += he->count; + hist_entry__free(he); + return; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &collapse_hists); +} + +static void collapse__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + + if (!sort__need_collapse) + return; + + next = rb_first(&hist); + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, &hist); + collapse__insert_entry(n); + } +} + +/* + * reverse the map, sort on count. + */ + +static struct rb_root output_hists; + +static void output__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &output_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + if (he->count > iter->count) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &output_hists); +} + +static void output__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + struct rb_root *tree = &hist; + + if (sort__need_collapse) + tree = &collapse_hists; + + next = rb_first(tree); + + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, tree); + output__insert_entry(n); + } +} + +static void register_idle_thread(void) +{ + struct thread *thread = threads__findnew(0); + + if (thread == NULL || + thread__set_comm(thread, "[idle]")) { + fprintf(stderr, "problem inserting idle task.\n"); + exit(-1); + } +} + +static unsigned long total = 0, + total_mmap = 0, + total_comm = 0, + total_fork = 0, + total_unknown = 0; + +static int +process_overflow_event(event_t *event, unsigned long offset, unsigned long head) +{ + char level; + int show = 0; + struct dso *dso = NULL; + struct thread *thread = threads__findnew(event->ip.pid); + __u64 ip = event->ip.ip; + struct map *map = NULL; + + dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.misc, + event->ip.pid, + (void *)(long)ip); + + dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid); + + if (thread == NULL) { + fprintf(stderr, "problem processing %d event, skipping it.\n", + event->header.type); + return -1; + } + + if (event->header.misc & PERF_EVENT_MISC_KERNEL) { + show = SHOW_KERNEL; + level = 'k'; + + dso = kernel_dso; + + dprintf(" ...... dso: %s\n", dso->name); + + } else if (event->header.misc & PERF_EVENT_MISC_USER) { + + show = SHOW_USER; + level = '.'; + + map = thread__find_map(thread, ip); + if (map != NULL) { + ip = map->map_ip(map, ip); + dso = map->dso; + } else { + /* + * If this is outside of all known maps, + * and is a negative address, try to look it + * up in the kernel dso, as it might be a + * vsyscall (which executes in user-mode): + */ + if ((long long)ip < 0) + dso = kernel_dso; + } + dprintf(" ...... dso: %s\n", dso ? dso->name : ""); + + } else { + show = SHOW_HV; + level = 'H'; + dprintf(" ...... dso: [hypervisor]\n"); + } + + if (show & show_mask) { + struct symbol *sym = NULL; + + if (dso) + sym = dso->find_symbol(dso, ip); + + if (hist_entry__add(thread, map, dso, sym, ip, level)) { + fprintf(stderr, + "problem incrementing symbol count, skipping event\n"); + return -1; + } + } + total++; + + return 0; +} + +static int +process_mmap_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->mmap.pid); + struct map *map = map__new(&event->mmap); + + dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->mmap.pid, + (void *)(long)event->mmap.start, + (void *)(long)event->mmap.len, + (void *)(long)event->mmap.pgoff, + event->mmap.filename); + + if (thread == NULL || map == NULL) { + dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n"); + return 0; + } + + thread__insert_map(thread, map); + total_mmap++; + + return 0; +} + +static int +process_comm_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->comm.pid); + + dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->comm.comm, event->comm.pid); + + if (thread == NULL || + thread__set_comm(thread, event->comm.comm)) { + dprintf("problem processing PERF_EVENT_COMM, skipping event.\n"); + return -1; + } + total_comm++; + + return 0; +} + +static int +process_fork_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->fork.pid); + struct thread *parent = threads__findnew(event->fork.ppid); + + dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->fork.pid, event->fork.ppid); + + if (!thread || !parent || thread__fork(thread, parent)) { + dprintf("problem processing PERF_EVENT_FORK, skipping event.\n"); + return -1; + } + total_fork++; + + return 0; +} + +static int +process_period_event(event_t *event, unsigned long offset, unsigned long head) +{ + dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->period.time, + event->period.id, + event->period.sample_period); + + return 0; +} + +static int +process_event(event_t *event, unsigned long offset, unsigned long head) +{ + if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) + return process_overflow_event(event, offset, head); + + switch (event->header.type) { + case PERF_EVENT_MMAP: + return process_mmap_event(event, offset, head); + + case PERF_EVENT_COMM: + return process_comm_event(event, offset, head); + + case PERF_EVENT_FORK: + return process_fork_event(event, offset, head); + + case PERF_EVENT_PERIOD: + return process_period_event(event, offset, head); + /* + * We dont process them right now but they are fine: + */ + + case PERF_EVENT_THROTTLE: + case PERF_EVENT_UNTHROTTLE: + return 0; + + default: + return -1; + } + + return 0; +} + +static int +parse_line(FILE *file, struct symbol *sym, __u64 start, __u64 len) +{ + char *line = NULL, *tmp, *tmp2; + unsigned int offset; + size_t line_len; + __u64 line_ip; + int ret; + char *c; + + if (getline(&line, &line_len, file) < 0) + return -1; + if (!line) + return -1; + + c = strchr(line, '\n'); + if (c) + *c = 0; + + line_ip = -1; + offset = 0; + ret = -2; + + /* + * Strip leading spaces: + */ + tmp = line; + while (*tmp) { + if (*tmp != ' ') + break; + tmp++; + } + + if (*tmp) { + /* + * Parse hexa addresses followed by ':' + */ + line_ip = strtoull(tmp, &tmp2, 16); + if (*tmp2 != ':') + line_ip = -1; + } + + if (line_ip != -1) { + unsigned int hits = 0; + double percent = 0.0; + char *color = PERF_COLOR_NORMAL; + + offset = line_ip - start; + if (offset < len) + hits = sym->hist[offset]; + + if (sym->hist_sum) + percent = 100.0 * hits / sym->hist_sum; + + /* + * We color high-overhead entries in red, mid-overhead + * entries in green - and keep the low overhead places + * normal: + */ + if (percent >= 5.0) + color = PERF_COLOR_RED; + else { + if (percent > 0.5) + color = PERF_COLOR_GREEN; + } + + color_fprintf(stdout, color, " %7.2f", percent); + printf(" : "); + color_fprintf(stdout, PERF_COLOR_BLUE, "%s\n", line); + } else { + if (!*line) + printf(" :\n"); + else + printf(" : %s\n", line); + } + + return 0; +} + +static void annotate_sym(struct dso *dso, struct symbol *sym) +{ + char *filename = dso->name; + __u64 start, end, len; + char command[PATH_MAX*2]; + FILE *file; + + if (!filename) + return; + if (dso == kernel_dso) + filename = vmlinux; + + printf("\n------------------------------------------------\n"); + printf(" Percent | Source code & Disassembly of %s\n", filename); + printf("------------------------------------------------\n"); + + if (verbose >= 2) + printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name); + + start = sym->obj_start; + if (!start) + start = sym->start; + + end = start + sym->end - sym->start + 1; + len = sym->end - sym->start; + + sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (__u64)start, (__u64)end, filename); + + if (verbose >= 3) + printf("doing: %s\n", command); + + file = popen(command, "r"); + if (!file) + return; + + while (!feof(file)) { + if (parse_line(file, sym, start, len) < 0) + break; + } + + pclose(file); +} + +static void find_annotations(void) +{ + struct rb_node *nd; + struct dso *dso; + int count = 0; + + list_for_each_entry(dso, &dsos, node) { + + for (nd = rb_first(&dso->syms); nd; nd = rb_next(nd)) { + struct symbol *sym = rb_entry(nd, struct symbol, rb_node); + + if (sym->hist) { + annotate_sym(dso, sym); + count++; + } + } + } + + if (!count) + printf(" Error: symbol '%s' not present amongst the samples.\n", sym_hist_filter); +} + +static int __cmd_annotate(void) +{ + int ret, rc = EXIT_FAILURE; + unsigned long offset = 0; + unsigned long head = 0; + struct stat stat; + event_t *event; + uint32_t size; + char *buf; + + register_idle_thread(); + + input = open(input_name, O_RDONLY); + if (input < 0) { + perror("failed to open file"); + exit(-1); + } + + ret = fstat(input, &stat); + if (ret < 0) { + perror("failed to stat file"); + exit(-1); + } + + if (!stat.st_size) { + fprintf(stderr, "zero-sized file, nothing to do!\n"); + exit(0); + } + + if (load_kernel() < 0) { + perror("failed to load kernel symbols"); + return EXIT_FAILURE; + } + +remap: + buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ, + MAP_SHARED, input, offset); + if (buf == MAP_FAILED) { + perror("failed to mmap file"); + exit(-1); + } + +more: + event = (event_t *)(buf + head); + + size = event->header.size; + if (!size) + size = 8; + + if (head + event->header.size >= page_size * mmap_window) { + unsigned long shift = page_size * (head / page_size); + int ret; + + ret = munmap(buf, page_size * mmap_window); + assert(ret == 0); + + offset += shift; + head -= shift; + goto remap; + } + + size = event->header.size; + + dprintf("%p [%p]: event: %d\n", + (void *)(offset + head), + (void *)(long)event->header.size, + event->header.type); + + if (!size || process_event(event, offset, head) < 0) { + + dprintf("%p [%p]: skipping unknown header type: %d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.type); + + total_unknown++; + + /* + * assume we lost track of the stream, check alignment, and + * increment a single u64 in the hope to catch on again 'soon'. + */ + + if (unlikely(head & 7)) + head &= ~7ULL; + + size = 8; + } + + head += size; + + if (offset + head < stat.st_size) + goto more; + + rc = EXIT_SUCCESS; + close(input); + + dprintf(" IP events: %10ld\n", total); + dprintf(" mmap events: %10ld\n", total_mmap); + dprintf(" comm events: %10ld\n", total_comm); + dprintf(" fork events: %10ld\n", total_fork); + dprintf(" unknown events: %10ld\n", total_unknown); + + if (dump_trace) + return 0; + + if (verbose >= 3) + threads__fprintf(stdout); + + if (verbose >= 2) + dsos__fprintf(stdout); + + collapse__resort(); + output__resort(); + + find_annotations(); + + return rc; +} + +static const char * const annotate_usage[] = { + "perf annotate [] ", + NULL +}; + +static const struct option options[] = { + OPT_STRING('i', "input", &input_name, "file", + "input file name"), + OPT_STRING('s', "symbol", &sym_hist_filter, "symbol", + "symbol to annotate"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show symbol address, etc)"), + OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace, + "dump raw trace in ASCII"), + OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"), + OPT_END() +}; + +static void setup_sorting(void) +{ + char *tmp, *tok, *str = strdup(sort_order); + + for (tok = strtok_r(str, ", ", &tmp); + tok; tok = strtok_r(NULL, ", ", &tmp)) { + if (sort_dimension__add(tok) < 0) { + error("Unknown --sort key: `%s'", tok); + usage_with_options(annotate_usage, options); + } + } + + free(str); +} + +int cmd_annotate(int argc, const char **argv, const char *prefix) +{ + symbol__init(); + + page_size = getpagesize(); + + argc = parse_options(argc, argv, options, annotate_usage, 0); + + setup_sorting(); + + if (argc) { + /* + * Special case: if there's an argument left then assume tha + * it's a symbol filter: + */ + if (argc > 1) + usage_with_options(annotate_usage, options); + + sym_hist_filter = argv[0]; + } + + if (!sym_hist_filter) + usage_with_options(annotate_usage, options); + + setup_pager(); + + return __cmd_annotate(); +} diff --git a/trunk/tools/perf/builtin-help.c b/trunk/tools/perf/builtin-help.c new file mode 100644 index 000000000000..0f32dc3f3c4c --- /dev/null +++ b/trunk/tools/perf/builtin-help.c @@ -0,0 +1,461 @@ +/* + * builtin-help.c + * + * Builtin help command + */ +#include "util/cache.h" +#include "builtin.h" +#include "util/exec_cmd.h" +#include "common-cmds.h" +#include "util/parse-options.h" +#include "util/run-command.h" +#include "util/help.h" + +static struct man_viewer_list { + struct man_viewer_list *next; + char name[FLEX_ARRAY]; +} *man_viewer_list; + +static struct man_viewer_info_list { + struct man_viewer_info_list *next; + const char *info; + char name[FLEX_ARRAY]; +} *man_viewer_info_list; + +enum help_format { + HELP_FORMAT_MAN, + HELP_FORMAT_INFO, + HELP_FORMAT_WEB, +}; + +static int show_all = 0; +static enum help_format help_format = HELP_FORMAT_MAN; +static struct option builtin_help_options[] = { + OPT_BOOLEAN('a', "all", &show_all, "print all available commands"), + OPT_SET_INT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN), + OPT_SET_INT('w', "web", &help_format, "show manual in web browser", + HELP_FORMAT_WEB), + OPT_SET_INT('i', "info", &help_format, "show info page", + HELP_FORMAT_INFO), + OPT_END(), +}; + +static const char * const builtin_help_usage[] = { + "perf help [--all] [--man|--web|--info] [command]", + NULL +}; + +static enum help_format parse_help_format(const char *format) +{ + if (!strcmp(format, "man")) + return HELP_FORMAT_MAN; + if (!strcmp(format, "info")) + return HELP_FORMAT_INFO; + if (!strcmp(format, "web") || !strcmp(format, "html")) + return HELP_FORMAT_WEB; + die("unrecognized help format '%s'", format); +} + +static const char *get_man_viewer_info(const char *name) +{ + struct man_viewer_info_list *viewer; + + for (viewer = man_viewer_info_list; viewer; viewer = viewer->next) + { + if (!strcasecmp(name, viewer->name)) + return viewer->info; + } + return NULL; +} + +static int check_emacsclient_version(void) +{ + struct strbuf buffer = STRBUF_INIT; + struct child_process ec_process; + const char *argv_ec[] = { "emacsclient", "--version", NULL }; + int version; + + /* emacsclient prints its version number on stderr */ + memset(&ec_process, 0, sizeof(ec_process)); + ec_process.argv = argv_ec; + ec_process.err = -1; + ec_process.stdout_to_stderr = 1; + if (start_command(&ec_process)) { + fprintf(stderr, "Failed to start emacsclient.\n"); + return -1; + } + strbuf_read(&buffer, ec_process.err, 20); + close(ec_process.err); + + /* + * Don't bother checking return value, because "emacsclient --version" + * seems to always exits with code 1. + */ + finish_command(&ec_process); + + if (prefixcmp(buffer.buf, "emacsclient")) { + fprintf(stderr, "Failed to parse emacsclient version.\n"); + strbuf_release(&buffer); + return -1; + } + + strbuf_remove(&buffer, 0, strlen("emacsclient")); + version = atoi(buffer.buf); + + if (version < 22) { + fprintf(stderr, + "emacsclient version '%d' too old (< 22).\n", + version); + strbuf_release(&buffer); + return -1; + } + + strbuf_release(&buffer); + return 0; +} + +static void exec_woman_emacs(const char* path, const char *page) +{ + if (!check_emacsclient_version()) { + /* This works only with emacsclient version >= 22. */ + struct strbuf man_page = STRBUF_INIT; + + if (!path) + path = "emacsclient"; + strbuf_addf(&man_page, "(woman \"%s\")", page); + execlp(path, "emacsclient", "-e", man_page.buf, NULL); + warning("failed to exec '%s': %s", path, strerror(errno)); + } +} + +static void exec_man_konqueror(const char* path, const char *page) +{ + const char *display = getenv("DISPLAY"); + if (display && *display) { + struct strbuf man_page = STRBUF_INIT; + const char *filename = "kfmclient"; + + /* It's simpler to launch konqueror using kfmclient. */ + if (path) { + const char *file = strrchr(path, '/'); + if (file && !strcmp(file + 1, "konqueror")) { + char *new = strdup(path); + char *dest = strrchr(new, '/'); + + /* strlen("konqueror") == strlen("kfmclient") */ + strcpy(dest + 1, "kfmclient"); + path = new; + } + if (file) + filename = file; + } else + path = "kfmclient"; + strbuf_addf(&man_page, "man:%s(1)", page); + execlp(path, filename, "newTab", man_page.buf, NULL); + warning("failed to exec '%s': %s", path, strerror(errno)); + } +} + +static void exec_man_man(const char* path, const char *page) +{ + if (!path) + path = "man"; + execlp(path, "man", page, NULL); + warning("failed to exec '%s': %s", path, strerror(errno)); +} + +static void exec_man_cmd(const char *cmd, const char *page) +{ + struct strbuf shell_cmd = STRBUF_INIT; + strbuf_addf(&shell_cmd, "%s %s", cmd, page); + execl("/bin/sh", "sh", "-c", shell_cmd.buf, NULL); + warning("failed to exec '%s': %s", cmd, strerror(errno)); +} + +static void add_man_viewer(const char *name) +{ + struct man_viewer_list **p = &man_viewer_list; + size_t len = strlen(name); + + while (*p) + p = &((*p)->next); + *p = calloc(1, (sizeof(**p) + len + 1)); + strncpy((*p)->name, name, len); +} + +static int supported_man_viewer(const char *name, size_t len) +{ + return (!strncasecmp("man", name, len) || + !strncasecmp("woman", name, len) || + !strncasecmp("konqueror", name, len)); +} + +static void do_add_man_viewer_info(const char *name, + size_t len, + const char *value) +{ + struct man_viewer_info_list *new = calloc(1, sizeof(*new) + len + 1); + + strncpy(new->name, name, len); + new->info = strdup(value); + new->next = man_viewer_info_list; + man_viewer_info_list = new; +} + +static int add_man_viewer_path(const char *name, + size_t len, + const char *value) +{ + if (supported_man_viewer(name, len)) + do_add_man_viewer_info(name, len, value); + else + warning("'%s': path for unsupported man viewer.\n" + "Please consider using 'man..cmd' instead.", + name); + + return 0; +} + +static int add_man_viewer_cmd(const char *name, + size_t len, + const char *value) +{ + if (supported_man_viewer(name, len)) + warning("'%s': cmd for supported man viewer.\n" + "Please consider using 'man..path' instead.", + name); + else + do_add_man_viewer_info(name, len, value); + + return 0; +} + +static int add_man_viewer_info(const char *var, const char *value) +{ + const char *name = var + 4; + const char *subkey = strrchr(name, '.'); + + if (!subkey) + return error("Config with no key for man viewer: %s", name); + + if (!strcmp(subkey, ".path")) { + if (!value) + return config_error_nonbool(var); + return add_man_viewer_path(name, subkey - name, value); + } + if (!strcmp(subkey, ".cmd")) { + if (!value) + return config_error_nonbool(var); + return add_man_viewer_cmd(name, subkey - name, value); + } + + warning("'%s': unsupported man viewer sub key.", subkey); + return 0; +} + +static int perf_help_config(const char *var, const char *value, void *cb) +{ + if (!strcmp(var, "help.format")) { + if (!value) + return config_error_nonbool(var); + help_format = parse_help_format(value); + return 0; + } + if (!strcmp(var, "man.viewer")) { + if (!value) + return config_error_nonbool(var); + add_man_viewer(value); + return 0; + } + if (!prefixcmp(var, "man.")) + return add_man_viewer_info(var, value); + + return perf_default_config(var, value, cb); +} + +static struct cmdnames main_cmds, other_cmds; + +void list_common_cmds_help(void) +{ + int i, longest = 0; + + for (i = 0; i < ARRAY_SIZE(common_cmds); i++) { + if (longest < strlen(common_cmds[i].name)) + longest = strlen(common_cmds[i].name); + } + + puts(" The most commonly used perf commands are:"); + for (i = 0; i < ARRAY_SIZE(common_cmds); i++) { + printf(" %s ", common_cmds[i].name); + mput_char(' ', longest - strlen(common_cmds[i].name)); + puts(common_cmds[i].help); + } +} + +static int is_perf_command(const char *s) +{ + return is_in_cmdlist(&main_cmds, s) || + is_in_cmdlist(&other_cmds, s); +} + +static const char *prepend(const char *prefix, const char *cmd) +{ + size_t pre_len = strlen(prefix); + size_t cmd_len = strlen(cmd); + char *p = malloc(pre_len + cmd_len + 1); + memcpy(p, prefix, pre_len); + strcpy(p + pre_len, cmd); + return p; +} + +static const char *cmd_to_page(const char *perf_cmd) +{ + if (!perf_cmd) + return "perf"; + else if (!prefixcmp(perf_cmd, "perf")) + return perf_cmd; + else if (is_perf_command(perf_cmd)) + return prepend("perf-", perf_cmd); + else + return prepend("perf-", perf_cmd); +} + +static void setup_man_path(void) +{ + struct strbuf new_path = STRBUF_INIT; + const char *old_path = getenv("MANPATH"); + + /* We should always put ':' after our path. If there is no + * old_path, the ':' at the end will let 'man' to try + * system-wide paths after ours to find the manual page. If + * there is old_path, we need ':' as delimiter. */ + strbuf_addstr(&new_path, system_path(PERF_MAN_PATH)); + strbuf_addch(&new_path, ':'); + if (old_path) + strbuf_addstr(&new_path, old_path); + + setenv("MANPATH", new_path.buf, 1); + + strbuf_release(&new_path); +} + +static void exec_viewer(const char *name, const char *page) +{ + const char *info = get_man_viewer_info(name); + + if (!strcasecmp(name, "man")) + exec_man_man(info, page); + else if (!strcasecmp(name, "woman")) + exec_woman_emacs(info, page); + else if (!strcasecmp(name, "konqueror")) + exec_man_konqueror(info, page); + else if (info) + exec_man_cmd(info, page); + else + warning("'%s': unknown man viewer.", name); +} + +static void show_man_page(const char *perf_cmd) +{ + struct man_viewer_list *viewer; + const char *page = cmd_to_page(perf_cmd); + const char *fallback = getenv("PERF_MAN_VIEWER"); + + setup_man_path(); + for (viewer = man_viewer_list; viewer; viewer = viewer->next) + { + exec_viewer(viewer->name, page); /* will return when unable */ + } + if (fallback) + exec_viewer(fallback, page); + exec_viewer("man", page); + die("no man viewer handled the request"); +} + +static void show_info_page(const char *perf_cmd) +{ + const char *page = cmd_to_page(perf_cmd); + setenv("INFOPATH", system_path(PERF_INFO_PATH), 1); + execlp("info", "info", "perfman", page, NULL); +} + +static void get_html_page_path(struct strbuf *page_path, const char *page) +{ + struct stat st; + const char *html_path = system_path(PERF_HTML_PATH); + + /* Check that we have a perf documentation directory. */ + if (stat(mkpath("%s/perf.html", html_path), &st) + || !S_ISREG(st.st_mode)) + die("'%s': not a documentation directory.", html_path); + + strbuf_init(page_path, 0); + strbuf_addf(page_path, "%s/%s.html", html_path, page); +} + +/* + * If open_html is not defined in a platform-specific way (see for + * example compat/mingw.h), we use the script web--browse to display + * HTML. + */ +#ifndef open_html +static void open_html(const char *path) +{ + execl_perf_cmd("web--browse", "-c", "help.browser", path, NULL); +} +#endif + +static void show_html_page(const char *perf_cmd) +{ + const char *page = cmd_to_page(perf_cmd); + struct strbuf page_path; /* it leaks but we exec bellow */ + + get_html_page_path(&page_path, page); + + open_html(page_path.buf); +} + +int cmd_help(int argc, const char **argv, const char *prefix) +{ + const char *alias; + load_command_list("perf-", &main_cmds, &other_cmds); + + perf_config(perf_help_config, NULL); + + argc = parse_options(argc, argv, builtin_help_options, + builtin_help_usage, 0); + + if (show_all) { + printf("\n usage: %s\n\n", perf_usage_string); + list_commands("perf commands", &main_cmds, &other_cmds); + printf(" %s\n\n", perf_more_info_string); + return 0; + } + + if (!argv[0]) { + printf("\n usage: %s\n\n", perf_usage_string); + list_common_cmds_help(); + printf("\n %s\n\n", perf_more_info_string); + return 0; + } + + alias = alias_lookup(argv[0]); + if (alias && !is_perf_command(argv[0])) { + printf("`perf %s' is aliased to `%s'\n", argv[0], alias); + return 0; + } + + switch (help_format) { + case HELP_FORMAT_MAN: + show_man_page(argv[0]); + break; + case HELP_FORMAT_INFO: + show_info_page(argv[0]); + break; + case HELP_FORMAT_WEB: + show_html_page(argv[0]); + break; + } + + return 0; +} diff --git a/trunk/tools/perf/builtin-list.c b/trunk/tools/perf/builtin-list.c new file mode 100644 index 000000000000..fe60e37c96ef --- /dev/null +++ b/trunk/tools/perf/builtin-list.c @@ -0,0 +1,20 @@ +/* + * builtin-list.c + * + * Builtin list command: list all event types + * + * Copyright (C) 2009, Thomas Gleixner + * Copyright (C) 2008-2009, Red Hat Inc, Ingo Molnar + */ +#include "builtin.h" + +#include "perf.h" + +#include "util/parse-options.h" +#include "util/parse-events.h" + +int cmd_list(int argc, const char **argv, const char *prefix) +{ + print_events(); + return 0; +} diff --git a/trunk/tools/perf/builtin-record.c b/trunk/tools/perf/builtin-record.c new file mode 100644 index 000000000000..29259e74dcfa --- /dev/null +++ b/trunk/tools/perf/builtin-record.c @@ -0,0 +1,582 @@ +/* + * builtin-record.c + * + * Builtin record command: Record the profile of a workload + * (or a CPU, or a PID) into the perf.data output file - for + * later analysis via perf report. + */ +#include "builtin.h" + +#include "perf.h" + +#include "util/util.h" +#include "util/parse-options.h" +#include "util/parse-events.h" +#include "util/string.h" + +#include +#include + +#define ALIGN(x, a) __ALIGN_MASK(x, (typeof(x))(a)-1) +#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask)) + +static int fd[MAX_NR_CPUS][MAX_COUNTERS]; + +static long default_interval = 100000; + +static int nr_cpus = 0; +static unsigned int page_size; +static unsigned int mmap_pages = 128; +static int freq = 0; +static int output; +static const char *output_name = "perf.data"; +static int group = 0; +static unsigned int realtime_prio = 0; +static int system_wide = 0; +static pid_t target_pid = -1; +static int inherit = 1; +static int force = 0; +static int append_file = 0; +static int verbose = 0; + +static long samples; +static struct timeval last_read; +static struct timeval this_read; + +static __u64 bytes_written; + +static struct pollfd event_array[MAX_NR_CPUS * MAX_COUNTERS]; + +static int nr_poll; +static int nr_cpu; + +struct mmap_event { + struct perf_event_header header; + __u32 pid; + __u32 tid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; +}; + +struct comm_event { + struct perf_event_header header; + __u32 pid; + __u32 tid; + char comm[16]; +}; + + +struct mmap_data { + int counter; + void *base; + unsigned int mask; + unsigned int prev; +}; + +static struct mmap_data mmap_array[MAX_NR_CPUS][MAX_COUNTERS]; + +static unsigned int mmap_read_head(struct mmap_data *md) +{ + struct perf_counter_mmap_page *pc = md->base; + int head; + + head = pc->data_head; + rmb(); + + return head; +} + +static void mmap_read(struct mmap_data *md) +{ + unsigned int head = mmap_read_head(md); + unsigned int old = md->prev; + unsigned char *data = md->base + page_size; + unsigned long size; + void *buf; + int diff; + + gettimeofday(&this_read, NULL); + + /* + * If we're further behind than half the buffer, there's a chance + * the writer will bite our tail and mess up the samples under us. + * + * If we somehow ended up ahead of the head, we got messed up. + * + * In either case, truncate and restart at head. + */ + diff = head - old; + if (diff > md->mask / 2 || diff < 0) { + struct timeval iv; + unsigned long msecs; + + timersub(&this_read, &last_read, &iv); + msecs = iv.tv_sec*1000 + iv.tv_usec/1000; + + fprintf(stderr, "WARNING: failed to keep up with mmap data." + " Last read %lu msecs ago.\n", msecs); + + /* + * head points to a known good entry, start there. + */ + old = head; + } + + last_read = this_read; + + if (old != head) + samples++; + + size = head - old; + + if ((old & md->mask) + size != (head & md->mask)) { + buf = &data[old & md->mask]; + size = md->mask + 1 - (old & md->mask); + old += size; + + while (size) { + int ret = write(output, buf, size); + + if (ret < 0) + die("failed to write"); + + size -= ret; + buf += ret; + + bytes_written += ret; + } + } + + buf = &data[old & md->mask]; + size = head - old; + old += size; + + while (size) { + int ret = write(output, buf, size); + + if (ret < 0) + die("failed to write"); + + size -= ret; + buf += ret; + + bytes_written += ret; + } + + md->prev = old; +} + +static volatile int done = 0; +static volatile int signr = -1; + +static void sig_handler(int sig) +{ + done = 1; + signr = sig; +} + +static void sig_atexit(void) +{ + if (signr == -1) + return; + + signal(signr, SIG_DFL); + kill(getpid(), signr); +} + +static void pid_synthesize_comm_event(pid_t pid, int full) +{ + struct comm_event comm_ev; + char filename[PATH_MAX]; + char bf[BUFSIZ]; + int fd, ret; + size_t size; + char *field, *sep; + DIR *tasks; + struct dirent dirent, *next; + + snprintf(filename, sizeof(filename), "/proc/%d/stat", pid); + + fd = open(filename, O_RDONLY); + if (fd < 0) { + fprintf(stderr, "couldn't open %s\n", filename); + exit(EXIT_FAILURE); + } + if (read(fd, bf, sizeof(bf)) < 0) { + fprintf(stderr, "couldn't read %s\n", filename); + exit(EXIT_FAILURE); + } + close(fd); + + /* 9027 (cat) R 6747 9027 6747 34816 9027 ... */ + memset(&comm_ev, 0, sizeof(comm_ev)); + field = strchr(bf, '('); + if (field == NULL) + goto out_failure; + sep = strchr(++field, ')'); + if (sep == NULL) + goto out_failure; + size = sep - field; + memcpy(comm_ev.comm, field, size++); + + comm_ev.pid = pid; + comm_ev.header.type = PERF_EVENT_COMM; + size = ALIGN(size, sizeof(__u64)); + comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size); + + if (!full) { + comm_ev.tid = pid; + + ret = write(output, &comm_ev, comm_ev.header.size); + if (ret < 0) { + perror("failed to write"); + exit(-1); + } + return; + } + + snprintf(filename, sizeof(filename), "/proc/%d/task", pid); + + tasks = opendir(filename); + while (!readdir_r(tasks, &dirent, &next) && next) { + char *end; + pid = strtol(dirent.d_name, &end, 10); + if (*end) + continue; + + comm_ev.tid = pid; + + ret = write(output, &comm_ev, comm_ev.header.size); + if (ret < 0) { + perror("failed to write"); + exit(-1); + } + } + closedir(tasks); + return; + +out_failure: + fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n", + filename); + exit(EXIT_FAILURE); +} + +static void pid_synthesize_mmap_samples(pid_t pid) +{ + char filename[PATH_MAX]; + FILE *fp; + + snprintf(filename, sizeof(filename), "/proc/%d/maps", pid); + + fp = fopen(filename, "r"); + if (fp == NULL) { + fprintf(stderr, "couldn't open %s\n", filename); + exit(EXIT_FAILURE); + } + while (1) { + char bf[BUFSIZ], *pbf = bf; + struct mmap_event mmap_ev = { + .header.type = PERF_EVENT_MMAP, + }; + int n; + size_t size; + if (fgets(bf, sizeof(bf), fp) == NULL) + break; + + /* 00400000-0040c000 r-xp 00000000 fd:01 41038 /bin/cat */ + n = hex2u64(pbf, &mmap_ev.start); + if (n < 0) + continue; + pbf += n + 1; + n = hex2u64(pbf, &mmap_ev.len); + if (n < 0) + continue; + pbf += n + 3; + if (*pbf == 'x') { /* vm_exec */ + char *execname = strrchr(bf, ' '); + + if (execname == NULL || execname[1] != '/') + continue; + + execname += 1; + size = strlen(execname); + execname[size - 1] = '\0'; /* Remove \n */ + memcpy(mmap_ev.filename, execname, size); + size = ALIGN(size, sizeof(__u64)); + mmap_ev.len -= mmap_ev.start; + mmap_ev.header.size = (sizeof(mmap_ev) - + (sizeof(mmap_ev.filename) - size)); + mmap_ev.pid = pid; + mmap_ev.tid = pid; + + if (write(output, &mmap_ev, mmap_ev.header.size) < 0) { + perror("failed to write"); + exit(-1); + } + } + } + + fclose(fp); +} + +static void synthesize_samples(void) +{ + DIR *proc; + struct dirent dirent, *next; + + proc = opendir("/proc"); + + while (!readdir_r(proc, &dirent, &next) && next) { + char *end; + pid_t pid; + + pid = strtol(dirent.d_name, &end, 10); + if (*end) /* only interested in proper numerical dirents */ + continue; + + pid_synthesize_comm_event(pid, 1); + pid_synthesize_mmap_samples(pid); + } + + closedir(proc); +} + +static int group_fd; + +static void create_counter(int counter, int cpu, pid_t pid) +{ + struct perf_counter_attr *attr = attrs + counter; + int track = 1; + + attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID; + if (freq) { + attr->sample_type |= PERF_SAMPLE_PERIOD; + attr->freq = 1; + attr->sample_freq = freq; + } + attr->mmap = track; + attr->comm = track; + attr->inherit = (cpu < 0) && inherit; + attr->disabled = 1; + + track = 0; /* only the first counter needs these */ + +try_again: + fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0); + + if (fd[nr_cpu][counter] < 0) { + int err = errno; + + if (err == EPERM) + die("Permission error - are you root?\n"); + + /* + * If it's cycles then fall back to hrtimer + * based cpu-clock-tick sw counter, which + * is always available even if no PMU support: + */ + if (attr->type == PERF_TYPE_HARDWARE + && attr->config == PERF_COUNT_HW_CPU_CYCLES) { + + if (verbose) + warning(" ... trying to fall back to cpu-clock-ticks\n"); + attr->type = PERF_TYPE_SOFTWARE; + attr->config = PERF_COUNT_SW_CPU_CLOCK; + goto try_again; + } + printf("\n"); + error("perfcounter syscall returned with %d (%s)\n", + fd[nr_cpu][counter], strerror(err)); + die("No CONFIG_PERF_COUNTERS=y kernel support configured?\n"); + exit(-1); + } + + assert(fd[nr_cpu][counter] >= 0); + fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK); + + /* + * First counter acts as the group leader: + */ + if (group && group_fd == -1) + group_fd = fd[nr_cpu][counter]; + + event_array[nr_poll].fd = fd[nr_cpu][counter]; + event_array[nr_poll].events = POLLIN; + nr_poll++; + + mmap_array[nr_cpu][counter].counter = counter; + mmap_array[nr_cpu][counter].prev = 0; + mmap_array[nr_cpu][counter].mask = mmap_pages*page_size - 1; + mmap_array[nr_cpu][counter].base = mmap(NULL, (mmap_pages+1)*page_size, + PROT_READ, MAP_SHARED, fd[nr_cpu][counter], 0); + if (mmap_array[nr_cpu][counter].base == MAP_FAILED) { + error("failed to mmap with %d (%s)\n", errno, strerror(errno)); + exit(-1); + } + + ioctl(fd[nr_cpu][counter], PERF_COUNTER_IOC_ENABLE); +} + +static void open_counters(int cpu, pid_t pid) +{ + int counter; + + if (pid > 0) { + pid_synthesize_comm_event(pid, 0); + pid_synthesize_mmap_samples(pid); + } + + group_fd = -1; + for (counter = 0; counter < nr_counters; counter++) + create_counter(counter, cpu, pid); + + nr_cpu++; +} + +static int __cmd_record(int argc, const char **argv) +{ + int i, counter; + struct stat st; + pid_t pid; + int flags; + int ret; + + page_size = sysconf(_SC_PAGE_SIZE); + nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); + assert(nr_cpus <= MAX_NR_CPUS); + assert(nr_cpus >= 0); + + if (!stat(output_name, &st) && !force && !append_file) { + fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n", + output_name); + exit(-1); + } + + flags = O_CREAT|O_RDWR; + if (append_file) + flags |= O_APPEND; + else + flags |= O_TRUNC; + + output = open(output_name, flags, S_IRUSR|S_IWUSR); + if (output < 0) { + perror("failed to create output file"); + exit(-1); + } + + if (!system_wide) { + open_counters(-1, target_pid != -1 ? target_pid : getpid()); + } else for (i = 0; i < nr_cpus; i++) + open_counters(i, target_pid); + + atexit(sig_atexit); + signal(SIGCHLD, sig_handler); + signal(SIGINT, sig_handler); + + if (target_pid == -1 && argc) { + pid = fork(); + if (pid < 0) + perror("failed to fork"); + + if (!pid) { + if (execvp(argv[0], (char **)argv)) { + perror(argv[0]); + exit(-1); + } + } + } + + if (realtime_prio) { + struct sched_param param; + + param.sched_priority = realtime_prio; + if (sched_setscheduler(0, SCHED_FIFO, ¶m)) { + printf("Could not set realtime priority.\n"); + exit(-1); + } + } + + if (system_wide) + synthesize_samples(); + + while (!done) { + int hits = samples; + + for (i = 0; i < nr_cpu; i++) { + for (counter = 0; counter < nr_counters; counter++) + mmap_read(&mmap_array[i][counter]); + } + + if (hits == samples) + ret = poll(event_array, nr_poll, 100); + } + + /* + * Approximate RIP event size: 24 bytes. + */ + fprintf(stderr, + "[ perf record: Captured and wrote %.3f MB %s (~%lld samples) ]\n", + (double)bytes_written / 1024.0 / 1024.0, + output_name, + bytes_written / 24); + + return 0; +} + +static const char * const record_usage[] = { + "perf record [] []", + "perf record [] -- []", + NULL +}; + +static const struct option options[] = { + OPT_CALLBACK('e', "event", NULL, "event", + "event selector. use 'perf list' to list available events", + parse_events), + OPT_INTEGER('p', "pid", &target_pid, + "record events on existing pid"), + OPT_INTEGER('r', "realtime", &realtime_prio, + "collect data with this RT SCHED_FIFO priority"), + OPT_BOOLEAN('a', "all-cpus", &system_wide, + "system-wide collection from all CPUs"), + OPT_BOOLEAN('A', "append", &append_file, + "append to the output file to do incremental profiling"), + OPT_BOOLEAN('f', "force", &force, + "overwrite existing data file"), + OPT_LONG('c', "count", &default_interval, + "event period to sample"), + OPT_STRING('o', "output", &output_name, "file", + "output file name"), + OPT_BOOLEAN('i', "inherit", &inherit, + "child tasks inherit counters"), + OPT_INTEGER('F', "freq", &freq, + "profile at this frequency"), + OPT_INTEGER('m', "mmap-pages", &mmap_pages, + "number of mmap data pages"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show counter open errors, etc)"), + OPT_END() +}; + +int cmd_record(int argc, const char **argv, const char *prefix) +{ + int counter; + + argc = parse_options(argc, argv, options, record_usage, 0); + if (!argc && target_pid == -1 && !system_wide) + usage_with_options(record_usage, options); + + if (!nr_counters) + nr_counters = 1; + + for (counter = 0; counter < nr_counters; counter++) { + if (attrs[counter].sample_period) + continue; + + attrs[counter].sample_period = default_interval; + } + + return __cmd_record(argc, argv); +} diff --git a/trunk/tools/perf/builtin-report.c b/trunk/tools/perf/builtin-report.c new file mode 100644 index 000000000000..82fa93b4db99 --- /dev/null +++ b/trunk/tools/perf/builtin-report.c @@ -0,0 +1,1316 @@ +/* + * builtin-report.c + * + * Builtin report command: Analyze the perf.data input file, + * look up and read DSOs and symbol information and display + * a histogram of results, along various sorting keys. + */ +#include "builtin.h" + +#include "util/util.h" + +#include "util/color.h" +#include "util/list.h" +#include "util/cache.h" +#include "util/rbtree.h" +#include "util/symbol.h" +#include "util/string.h" + +#include "perf.h" + +#include "util/parse-options.h" +#include "util/parse-events.h" + +#define SHOW_KERNEL 1 +#define SHOW_USER 2 +#define SHOW_HV 4 + +static char const *input_name = "perf.data"; +static char *vmlinux = NULL; + +static char default_sort_order[] = "comm,dso"; +static char *sort_order = default_sort_order; + +static int input; +static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV; + +static int dump_trace = 0; +#define dprintf(x...) do { if (dump_trace) printf(x); } while (0) + +static int verbose; +static int full_paths; + +static unsigned long page_size; +static unsigned long mmap_window = 32; + +struct ip_event { + struct perf_event_header header; + __u64 ip; + __u32 pid, tid; + __u64 period; +}; + +struct mmap_event { + struct perf_event_header header; + __u32 pid, tid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; +}; + +struct comm_event { + struct perf_event_header header; + __u32 pid, tid; + char comm[16]; +}; + +struct fork_event { + struct perf_event_header header; + __u32 pid, ppid; +}; + +struct period_event { + struct perf_event_header header; + __u64 time; + __u64 id; + __u64 sample_period; +}; + +typedef union event_union { + struct perf_event_header header; + struct ip_event ip; + struct mmap_event mmap; + struct comm_event comm; + struct fork_event fork; + struct period_event period; +} event_t; + +static LIST_HEAD(dsos); +static struct dso *kernel_dso; +static struct dso *vdso; + +static void dsos__add(struct dso *dso) +{ + list_add_tail(&dso->node, &dsos); +} + +static struct dso *dsos__find(const char *name) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + if (strcmp(pos->name, name) == 0) + return pos; + return NULL; +} + +static struct dso *dsos__findnew(const char *name) +{ + struct dso *dso = dsos__find(name); + int nr; + + if (dso) + return dso; + + dso = dso__new(name, 0); + if (!dso) + goto out_delete_dso; + + nr = dso__load(dso, NULL, verbose); + if (nr < 0) { + if (verbose) + fprintf(stderr, "Failed to open: %s\n", name); + goto out_delete_dso; + } + if (!nr && verbose) { + fprintf(stderr, + "No symbols found in: %s, maybe install a debug package?\n", + name); + } + + dsos__add(dso); + + return dso; + +out_delete_dso: + dso__delete(dso); + return NULL; +} + +static void dsos__fprintf(FILE *fp) +{ + struct dso *pos; + + list_for_each_entry(pos, &dsos, node) + dso__fprintf(pos, fp); +} + +static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip) +{ + return dso__find_symbol(kernel_dso, ip); +} + +static int load_kernel(void) +{ + int err; + + kernel_dso = dso__new("[kernel]", 0); + if (!kernel_dso) + return -1; + + err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose); + if (err) { + dso__delete(kernel_dso); + kernel_dso = NULL; + } else + dsos__add(kernel_dso); + + vdso = dso__new("[vdso]", 0); + if (!vdso) + return -1; + + vdso->find_symbol = vdso__find_symbol; + + dsos__add(vdso); + + return err; +} + +static char __cwd[PATH_MAX]; +static char *cwd = __cwd; +static int cwdlen; + +static int strcommon(const char *pathname) +{ + int n = 0; + + while (pathname[n] == cwd[n] && n < cwdlen) + ++n; + + return n; +} + +struct map { + struct list_head node; + __u64 start; + __u64 end; + __u64 pgoff; + __u64 (*map_ip)(struct map *, __u64); + struct dso *dso; +}; + +static __u64 map__map_ip(struct map *map, __u64 ip) +{ + return ip - map->start + map->pgoff; +} + +static __u64 vdso__map_ip(struct map *map, __u64 ip) +{ + return ip; +} + +static inline int is_anon_memory(const char *filename) +{ + return strcmp(filename, "//anon") == 0; +} + +static struct map *map__new(struct mmap_event *event) +{ + struct map *self = malloc(sizeof(*self)); + + if (self != NULL) { + const char *filename = event->filename; + char newfilename[PATH_MAX]; + int anon; + + if (cwd) { + int n = strcommon(filename); + + if (n == cwdlen) { + snprintf(newfilename, sizeof(newfilename), + ".%s", filename + n); + filename = newfilename; + } + } + + anon = is_anon_memory(filename); + + if (anon) { + snprintf(newfilename, sizeof(newfilename), "/tmp/perf-%d.map", event->pid); + filename = newfilename; + } + + self->start = event->start; + self->end = event->start + event->len; + self->pgoff = event->pgoff; + + self->dso = dsos__findnew(filename); + if (self->dso == NULL) + goto out_delete; + + if (self->dso == vdso || anon) + self->map_ip = vdso__map_ip; + else + self->map_ip = map__map_ip; + } + return self; +out_delete: + free(self); + return NULL; +} + +static struct map *map__clone(struct map *self) +{ + struct map *map = malloc(sizeof(*self)); + + if (!map) + return NULL; + + memcpy(map, self, sizeof(*self)); + + return map; +} + +static int map__overlap(struct map *l, struct map *r) +{ + if (l->start > r->start) { + struct map *t = l; + l = r; + r = t; + } + + if (l->end > r->start) + return 1; + + return 0; +} + +static size_t map__fprintf(struct map *self, FILE *fp) +{ + return fprintf(fp, " %Lx-%Lx %Lx %s\n", + self->start, self->end, self->pgoff, self->dso->name); +} + + +struct thread { + struct rb_node rb_node; + struct list_head maps; + pid_t pid; + char *comm; +}; + +static struct thread *thread__new(pid_t pid) +{ + struct thread *self = malloc(sizeof(*self)); + + if (self != NULL) { + self->pid = pid; + self->comm = malloc(32); + if (self->comm) + snprintf(self->comm, 32, ":%d", self->pid); + INIT_LIST_HEAD(&self->maps); + } + + return self; +} + +static int thread__set_comm(struct thread *self, const char *comm) +{ + if (self->comm) + free(self->comm); + self->comm = strdup(comm); + return self->comm ? 0 : -ENOMEM; +} + +static size_t thread__fprintf(struct thread *self, FILE *fp) +{ + struct map *pos; + size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm); + + list_for_each_entry(pos, &self->maps, node) + ret += map__fprintf(pos, fp); + + return ret; +} + + +static struct rb_root threads; +static struct thread *last_match; + +static struct thread *threads__findnew(pid_t pid) +{ + struct rb_node **p = &threads.rb_node; + struct rb_node *parent = NULL; + struct thread *th; + + /* + * Font-end cache - PID lookups come in blocks, + * so most of the time we dont have to look up + * the full rbtree: + */ + if (last_match && last_match->pid == pid) + return last_match; + + while (*p != NULL) { + parent = *p; + th = rb_entry(parent, struct thread, rb_node); + + if (th->pid == pid) { + last_match = th; + return th; + } + + if (pid < th->pid) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + th = thread__new(pid); + if (th != NULL) { + rb_link_node(&th->rb_node, parent, p); + rb_insert_color(&th->rb_node, &threads); + last_match = th; + } + + return th; +} + +static void thread__insert_map(struct thread *self, struct map *map) +{ + struct map *pos, *tmp; + + list_for_each_entry_safe(pos, tmp, &self->maps, node) { + if (map__overlap(pos, map)) { + list_del_init(&pos->node); + /* XXX leaks dsos */ + free(pos); + } + } + + list_add_tail(&map->node, &self->maps); +} + +static int thread__fork(struct thread *self, struct thread *parent) +{ + struct map *map; + + if (self->comm) + free(self->comm); + self->comm = strdup(parent->comm); + if (!self->comm) + return -ENOMEM; + + list_for_each_entry(map, &parent->maps, node) { + struct map *new = map__clone(map); + if (!new) + return -ENOMEM; + thread__insert_map(self, new); + } + + return 0; +} + +static struct map *thread__find_map(struct thread *self, __u64 ip) +{ + struct map *pos; + + if (self == NULL) + return NULL; + + list_for_each_entry(pos, &self->maps, node) + if (ip >= pos->start && ip <= pos->end) + return pos; + + return NULL; +} + +static size_t threads__fprintf(FILE *fp) +{ + size_t ret = 0; + struct rb_node *nd; + + for (nd = rb_first(&threads); nd; nd = rb_next(nd)) { + struct thread *pos = rb_entry(nd, struct thread, rb_node); + + ret += thread__fprintf(pos, fp); + } + + return ret; +} + +/* + * histogram, sorted on item, collects counts + */ + +static struct rb_root hist; + +struct hist_entry { + struct rb_node rb_node; + + struct thread *thread; + struct map *map; + struct dso *dso; + struct symbol *sym; + __u64 ip; + char level; + + __u64 count; +}; + +/* + * configurable sorting bits + */ + +struct sort_entry { + struct list_head list; + + char *header; + + int64_t (*cmp)(struct hist_entry *, struct hist_entry *); + int64_t (*collapse)(struct hist_entry *, struct hist_entry *); + size_t (*print)(FILE *fp, struct hist_entry *); +}; + +/* --sort pid */ + +static int64_t +sort__thread_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static size_t +sort__thread_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid); +} + +static struct sort_entry sort_thread = { + .header = " Command: Pid", + .cmp = sort__thread_cmp, + .print = sort__thread_print, +}; + +/* --sort comm */ + +static int64_t +sort__comm_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static int64_t +sort__comm_collapse(struct hist_entry *left, struct hist_entry *right) +{ + char *comm_l = left->thread->comm; + char *comm_r = right->thread->comm; + + if (!comm_l || !comm_r) { + if (!comm_l && !comm_r) + return 0; + else if (!comm_l) + return -1; + else + return 1; + } + + return strcmp(comm_l, comm_r); +} + +static size_t +sort__comm_print(FILE *fp, struct hist_entry *self) +{ + return fprintf(fp, "%16s", self->thread->comm); +} + +static struct sort_entry sort_comm = { + .header = " Command", + .cmp = sort__comm_cmp, + .collapse = sort__comm_collapse, + .print = sort__comm_print, +}; + +/* --sort dso */ + +static int64_t +sort__dso_cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct dso *dso_l = left->dso; + struct dso *dso_r = right->dso; + + if (!dso_l || !dso_r) { + if (!dso_l && !dso_r) + return 0; + else if (!dso_l) + return -1; + else + return 1; + } + + return strcmp(dso_l->name, dso_r->name); +} + +static size_t +sort__dso_print(FILE *fp, struct hist_entry *self) +{ + if (self->dso) + return fprintf(fp, "%-25s", self->dso->name); + + return fprintf(fp, "%016llx ", (__u64)self->ip); +} + +static struct sort_entry sort_dso = { + .header = "Shared Object ", + .cmp = sort__dso_cmp, + .print = sort__dso_print, +}; + +/* --sort symbol */ + +static int64_t +sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) +{ + __u64 ip_l, ip_r; + + if (left->sym == right->sym) + return 0; + + ip_l = left->sym ? left->sym->start : left->ip; + ip_r = right->sym ? right->sym->start : right->ip; + + return (int64_t)(ip_r - ip_l); +} + +static size_t +sort__sym_print(FILE *fp, struct hist_entry *self) +{ + size_t ret = 0; + + if (verbose) + ret += fprintf(fp, "%#018llx ", (__u64)self->ip); + + if (self->sym) { + ret += fprintf(fp, "[%c] %s", + self->dso == kernel_dso ? 'k' : '.', self->sym->name); + } else { + ret += fprintf(fp, "%#016llx", (__u64)self->ip); + } + + return ret; +} + +static struct sort_entry sort_sym = { + .header = "Symbol", + .cmp = sort__sym_cmp, + .print = sort__sym_print, +}; + +static int sort__need_collapse = 0; + +struct sort_dimension { + char *name; + struct sort_entry *entry; + int taken; +}; + +static struct sort_dimension sort_dimensions[] = { + { .name = "pid", .entry = &sort_thread, }, + { .name = "comm", .entry = &sort_comm, }, + { .name = "dso", .entry = &sort_dso, }, + { .name = "symbol", .entry = &sort_sym, }, +}; + +static LIST_HEAD(hist_entry__sort_list); + +static int sort_dimension__add(char *tok) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) { + struct sort_dimension *sd = &sort_dimensions[i]; + + if (sd->taken) + continue; + + if (strncasecmp(tok, sd->name, strlen(tok))) + continue; + + if (sd->entry->collapse) + sort__need_collapse = 1; + + list_add_tail(&sd->entry->list, &hist_entry__sort_list); + sd->taken = 1; + + return 0; + } + + return -ESRCH; +} + +static int64_t +hist_entry__cmp(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + cmp = se->cmp(left, right); + if (cmp) + break; + } + + return cmp; +} + +static int64_t +hist_entry__collapse(struct hist_entry *left, struct hist_entry *right) +{ + struct sort_entry *se; + int64_t cmp = 0; + + list_for_each_entry(se, &hist_entry__sort_list, list) { + int64_t (*f)(struct hist_entry *, struct hist_entry *); + + f = se->collapse ?: se->cmp; + + cmp = f(left, right); + if (cmp) + break; + } + + return cmp; +} + +static size_t +hist_entry__fprintf(FILE *fp, struct hist_entry *self, __u64 total_samples) +{ + struct sort_entry *se; + size_t ret; + + if (total_samples) { + double percent = self->count * 100.0 / total_samples; + char *color = PERF_COLOR_NORMAL; + + /* + * We color high-overhead entries in red, mid-overhead + * entries in green - and keep the low overhead places + * normal: + */ + if (percent >= 5.0) { + color = PERF_COLOR_RED; + } else { + if (percent >= 0.5) + color = PERF_COLOR_GREEN; + } + + ret = color_fprintf(fp, color, " %6.2f%%", + (self->count * 100.0) / total_samples); + } else + ret = fprintf(fp, "%12Ld ", self->count); + + list_for_each_entry(se, &hist_entry__sort_list, list) { + fprintf(fp, " "); + ret += se->print(fp, self); + } + + ret += fprintf(fp, "\n"); + + return ret; +} + +/* + * collect histogram counts + */ + +static int +hist_entry__add(struct thread *thread, struct map *map, struct dso *dso, + struct symbol *sym, __u64 ip, char level, __u64 count) +{ + struct rb_node **p = &hist.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *he; + struct hist_entry entry = { + .thread = thread, + .map = map, + .dso = dso, + .sym = sym, + .ip = ip, + .level = level, + .count = count, + }; + int cmp; + + while (*p != NULL) { + parent = *p; + he = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__cmp(&entry, he); + + if (!cmp) { + he->count += count; + return 0; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + he = malloc(sizeof(*he)); + if (!he) + return -ENOMEM; + *he = entry; + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &hist); + + return 0; +} + +static void hist_entry__free(struct hist_entry *he) +{ + free(he); +} + +/* + * collapse the histogram + */ + +static struct rb_root collapse_hists; + +static void collapse__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &collapse_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + int64_t cmp; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + cmp = hist_entry__collapse(iter, he); + + if (!cmp) { + iter->count += he->count; + hist_entry__free(he); + return; + } + + if (cmp < 0) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &collapse_hists); +} + +static void collapse__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + + if (!sort__need_collapse) + return; + + next = rb_first(&hist); + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, &hist); + collapse__insert_entry(n); + } +} + +/* + * reverse the map, sort on count. + */ + +static struct rb_root output_hists; + +static void output__insert_entry(struct hist_entry *he) +{ + struct rb_node **p = &output_hists.rb_node; + struct rb_node *parent = NULL; + struct hist_entry *iter; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct hist_entry, rb_node); + + if (he->count > iter->count) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&he->rb_node, parent, p); + rb_insert_color(&he->rb_node, &output_hists); +} + +static void output__resort(void) +{ + struct rb_node *next; + struct hist_entry *n; + struct rb_root *tree = &hist; + + if (sort__need_collapse) + tree = &collapse_hists; + + next = rb_first(tree); + + while (next) { + n = rb_entry(next, struct hist_entry, rb_node); + next = rb_next(&n->rb_node); + + rb_erase(&n->rb_node, tree); + output__insert_entry(n); + } +} + +static size_t output__fprintf(FILE *fp, __u64 total_samples) +{ + struct hist_entry *pos; + struct sort_entry *se; + struct rb_node *nd; + size_t ret = 0; + + fprintf(fp, "\n"); + fprintf(fp, "#\n"); + fprintf(fp, "# (%Ld samples)\n", (__u64)total_samples); + fprintf(fp, "#\n"); + + fprintf(fp, "# Overhead"); + list_for_each_entry(se, &hist_entry__sort_list, list) + fprintf(fp, " %s", se->header); + fprintf(fp, "\n"); + + fprintf(fp, "# ........"); + list_for_each_entry(se, &hist_entry__sort_list, list) { + int i; + + fprintf(fp, " "); + for (i = 0; i < strlen(se->header); i++) + fprintf(fp, "."); + } + fprintf(fp, "\n"); + + fprintf(fp, "#\n"); + + for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) { + pos = rb_entry(nd, struct hist_entry, rb_node); + ret += hist_entry__fprintf(fp, pos, total_samples); + } + + if (!strcmp(sort_order, default_sort_order)) { + fprintf(fp, "#\n"); + fprintf(fp, "# (For more details, try: perf report --sort comm,dso,symbol)\n"); + fprintf(fp, "#\n"); + } + fprintf(fp, "\n"); + + return ret; +} + +static void register_idle_thread(void) +{ + struct thread *thread = threads__findnew(0); + + if (thread == NULL || + thread__set_comm(thread, "[idle]")) { + fprintf(stderr, "problem inserting idle task.\n"); + exit(-1); + } +} + +static unsigned long total = 0, + total_mmap = 0, + total_comm = 0, + total_fork = 0, + total_unknown = 0; + +static int +process_overflow_event(event_t *event, unsigned long offset, unsigned long head) +{ + char level; + int show = 0; + struct dso *dso = NULL; + struct thread *thread = threads__findnew(event->ip.pid); + __u64 ip = event->ip.ip; + __u64 period = 1; + struct map *map = NULL; + + if (event->header.type & PERF_SAMPLE_PERIOD) + period = event->ip.period; + + dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.misc, + event->ip.pid, + (void *)(long)ip, + (long long)period); + + dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid); + + if (thread == NULL) { + fprintf(stderr, "problem processing %d event, skipping it.\n", + event->header.type); + return -1; + } + + if (event->header.misc & PERF_EVENT_MISC_KERNEL) { + show = SHOW_KERNEL; + level = 'k'; + + dso = kernel_dso; + + dprintf(" ...... dso: %s\n", dso->name); + + } else if (event->header.misc & PERF_EVENT_MISC_USER) { + + show = SHOW_USER; + level = '.'; + + map = thread__find_map(thread, ip); + if (map != NULL) { + ip = map->map_ip(map, ip); + dso = map->dso; + } else { + /* + * If this is outside of all known maps, + * and is a negative address, try to look it + * up in the kernel dso, as it might be a + * vsyscall (which executes in user-mode): + */ + if ((long long)ip < 0) + dso = kernel_dso; + } + dprintf(" ...... dso: %s\n", dso ? dso->name : ""); + + } else { + show = SHOW_HV; + level = 'H'; + dprintf(" ...... dso: [hypervisor]\n"); + } + + if (show & show_mask) { + struct symbol *sym = NULL; + + if (dso) + sym = dso->find_symbol(dso, ip); + + if (hist_entry__add(thread, map, dso, sym, ip, level, period)) { + fprintf(stderr, + "problem incrementing symbol count, skipping event\n"); + return -1; + } + } + total += period; + + return 0; +} + +static int +process_mmap_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->mmap.pid); + struct map *map = map__new(&event->mmap); + + dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->mmap.pid, + (void *)(long)event->mmap.start, + (void *)(long)event->mmap.len, + (void *)(long)event->mmap.pgoff, + event->mmap.filename); + + if (thread == NULL || map == NULL) { + dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n"); + return 0; + } + + thread__insert_map(thread, map); + total_mmap++; + + return 0; +} + +static int +process_comm_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->comm.pid); + + dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->comm.comm, event->comm.pid); + + if (thread == NULL || + thread__set_comm(thread, event->comm.comm)) { + dprintf("problem processing PERF_EVENT_COMM, skipping event.\n"); + return -1; + } + total_comm++; + + return 0; +} + +static int +process_fork_event(event_t *event, unsigned long offset, unsigned long head) +{ + struct thread *thread = threads__findnew(event->fork.pid); + struct thread *parent = threads__findnew(event->fork.ppid); + + dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->fork.pid, event->fork.ppid); + + if (!thread || !parent || thread__fork(thread, parent)) { + dprintf("problem processing PERF_EVENT_FORK, skipping event.\n"); + return -1; + } + total_fork++; + + return 0; +} + +static int +process_period_event(event_t *event, unsigned long offset, unsigned long head) +{ + dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->period.time, + event->period.id, + event->period.sample_period); + + return 0; +} + +static int +process_event(event_t *event, unsigned long offset, unsigned long head) +{ + if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) + return process_overflow_event(event, offset, head); + + switch (event->header.type) { + case PERF_EVENT_MMAP: + return process_mmap_event(event, offset, head); + + case PERF_EVENT_COMM: + return process_comm_event(event, offset, head); + + case PERF_EVENT_FORK: + return process_fork_event(event, offset, head); + + case PERF_EVENT_PERIOD: + return process_period_event(event, offset, head); + /* + * We dont process them right now but they are fine: + */ + + case PERF_EVENT_THROTTLE: + case PERF_EVENT_UNTHROTTLE: + return 0; + + default: + return -1; + } + + return 0; +} + +static int __cmd_report(void) +{ + int ret, rc = EXIT_FAILURE; + unsigned long offset = 0; + unsigned long head = 0; + struct stat stat; + event_t *event; + uint32_t size; + char *buf; + + register_idle_thread(); + + input = open(input_name, O_RDONLY); + if (input < 0) { + fprintf(stderr, " failed to open file: %s", input_name); + if (!strcmp(input_name, "perf.data")) + fprintf(stderr, " (try 'perf record' first)"); + fprintf(stderr, "\n"); + exit(-1); + } + + ret = fstat(input, &stat); + if (ret < 0) { + perror("failed to stat file"); + exit(-1); + } + + if (!stat.st_size) { + fprintf(stderr, "zero-sized file, nothing to do!\n"); + exit(0); + } + + if (load_kernel() < 0) { + perror("failed to load kernel symbols"); + return EXIT_FAILURE; + } + + if (!full_paths) { + if (getcwd(__cwd, sizeof(__cwd)) == NULL) { + perror("failed to get the current directory"); + return EXIT_FAILURE; + } + cwdlen = strlen(cwd); + } else { + cwd = NULL; + cwdlen = 0; + } +remap: + buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ, + MAP_SHARED, input, offset); + if (buf == MAP_FAILED) { + perror("failed to mmap file"); + exit(-1); + } + +more: + event = (event_t *)(buf + head); + + size = event->header.size; + if (!size) + size = 8; + + if (head + event->header.size >= page_size * mmap_window) { + unsigned long shift = page_size * (head / page_size); + int ret; + + ret = munmap(buf, page_size * mmap_window); + assert(ret == 0); + + offset += shift; + head -= shift; + goto remap; + } + + size = event->header.size; + + dprintf("%p [%p]: event: %d\n", + (void *)(offset + head), + (void *)(long)event->header.size, + event->header.type); + + if (!size || process_event(event, offset, head) < 0) { + + dprintf("%p [%p]: skipping unknown header type: %d\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->header.type); + + total_unknown++; + + /* + * assume we lost track of the stream, check alignment, and + * increment a single u64 in the hope to catch on again 'soon'. + */ + + if (unlikely(head & 7)) + head &= ~7ULL; + + size = 8; + } + + head += size; + + if (offset + head < stat.st_size) + goto more; + + rc = EXIT_SUCCESS; + close(input); + + dprintf(" IP events: %10ld\n", total); + dprintf(" mmap events: %10ld\n", total_mmap); + dprintf(" comm events: %10ld\n", total_comm); + dprintf(" fork events: %10ld\n", total_fork); + dprintf(" unknown events: %10ld\n", total_unknown); + + if (dump_trace) + return 0; + + if (verbose >= 3) + threads__fprintf(stdout); + + if (verbose >= 2) + dsos__fprintf(stdout); + + collapse__resort(); + output__resort(); + output__fprintf(stdout, total); + + return rc; +} + +static const char * const report_usage[] = { + "perf report [] ", + NULL +}; + +static const struct option options[] = { + OPT_STRING('i', "input", &input_name, "file", + "input file name"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show symbol address, etc)"), + OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace, + "dump raw trace in ASCII"), + OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"), + OPT_STRING('s', "sort", &sort_order, "key[,key2...]", + "sort by key(s): pid, comm, dso, symbol. Default: pid,symbol"), + OPT_BOOLEAN('P', "full-paths", &full_paths, + "Don't shorten the pathnames taking into account the cwd"), + OPT_END() +}; + +static void setup_sorting(void) +{ + char *tmp, *tok, *str = strdup(sort_order); + + for (tok = strtok_r(str, ", ", &tmp); + tok; tok = strtok_r(NULL, ", ", &tmp)) { + if (sort_dimension__add(tok) < 0) { + error("Unknown --sort key: `%s'", tok); + usage_with_options(report_usage, options); + } + } + + free(str); +} + +int cmd_report(int argc, const char **argv, const char *prefix) +{ + symbol__init(); + + page_size = getpagesize(); + + argc = parse_options(argc, argv, options, report_usage, 0); + + setup_sorting(); + + /* + * Any (unrecognized) arguments left? + */ + if (argc) + usage_with_options(report_usage, options); + + setup_pager(); + + return __cmd_report(); +} diff --git a/trunk/tools/perf/builtin-stat.c b/trunk/tools/perf/builtin-stat.c new file mode 100644 index 000000000000..c43e4a97dc42 --- /dev/null +++ b/trunk/tools/perf/builtin-stat.c @@ -0,0 +1,367 @@ +/* + * builtin-stat.c + * + * Builtin stat command: Give a precise performance counters summary + * overview about any workload, CPU or specific PID. + * + * Sample output: + + $ perf stat ~/hackbench 10 + Time: 0.104 + + Performance counter stats for '/home/mingo/hackbench': + + 1255.538611 task clock ticks # 10.143 CPU utilization factor + 54011 context switches # 0.043 M/sec + 385 CPU migrations # 0.000 M/sec + 17755 pagefaults # 0.014 M/sec + 3808323185 CPU cycles # 3033.219 M/sec + 1575111190 instructions # 1254.530 M/sec + 17367895 cache references # 13.833 M/sec + 7674421 cache misses # 6.112 M/sec + + Wall-clock time elapsed: 123.786620 msecs + + * + * Copyright (C) 2008, Red Hat Inc, Ingo Molnar + * + * Improvements and fixes by: + * + * Arjan van de Ven + * Yanmin Zhang + * Wu Fengguang + * Mike Galbraith + * Paul Mackerras + * + * Released under the GPL v2. (and only v2, not any later version) + */ + +#include "perf.h" +#include "builtin.h" +#include "util/util.h" +#include "util/parse-options.h" +#include "util/parse-events.h" + +#include + +static struct perf_counter_attr default_attrs[MAX_COUNTERS] = { + + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES}, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, + + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + +}; + +static int system_wide = 0; +static int inherit = 1; +static int verbose = 0; + +static int fd[MAX_NR_CPUS][MAX_COUNTERS]; + +static int target_pid = -1; +static int nr_cpus = 0; +static unsigned int page_size; + +static int scale = 1; + +static const unsigned int default_count[] = { + 1000000, + 1000000, + 10000, + 10000, + 1000000, + 10000, +}; + +static __u64 event_res[MAX_COUNTERS][3]; +static __u64 event_scaled[MAX_COUNTERS]; + +static __u64 runtime_nsecs; +static __u64 walltime_nsecs; +static __u64 runtime_cycles; + +static void create_perf_stat_counter(int counter) +{ + struct perf_counter_attr *attr = attrs + counter; + + if (scale) + attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | + PERF_FORMAT_TOTAL_TIME_RUNNING; + + if (system_wide) { + int cpu; + for (cpu = 0; cpu < nr_cpus; cpu ++) { + fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0); + if (fd[cpu][counter] < 0 && verbose) { + printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno)); + } + } + } else { + attr->inherit = inherit; + attr->disabled = 1; + + fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0); + if (fd[0][counter] < 0 && verbose) { + printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno)); + } + } +} + +/* + * Does the counter have nsecs as a unit? + */ +static inline int nsec_counter(int counter) +{ + if (attrs[counter].type != PERF_TYPE_SOFTWARE) + return 0; + + if (attrs[counter].config == PERF_COUNT_SW_CPU_CLOCK) + return 1; + + if (attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) + return 1; + + return 0; +} + +/* + * Read out the results of a single counter: + */ +static void read_counter(int counter) +{ + __u64 *count, single_count[3]; + ssize_t res; + int cpu, nv; + int scaled; + + count = event_res[counter]; + + count[0] = count[1] = count[2] = 0; + + nv = scale ? 3 : 1; + for (cpu = 0; cpu < nr_cpus; cpu ++) { + if (fd[cpu][counter] < 0) + continue; + + res = read(fd[cpu][counter], single_count, nv * sizeof(__u64)); + assert(res == nv * sizeof(__u64)); + + count[0] += single_count[0]; + if (scale) { + count[1] += single_count[1]; + count[2] += single_count[2]; + } + } + + scaled = 0; + if (scale) { + if (count[2] == 0) { + event_scaled[counter] = -1; + count[0] = 0; + return; + } + + if (count[2] < count[1]) { + event_scaled[counter] = 1; + count[0] = (unsigned long long) + ((double)count[0] * count[1] / count[2] + 0.5); + } + } + /* + * Save the full runtime - to allow normalization during printout: + */ + if (attrs[counter].type == PERF_TYPE_SOFTWARE && + attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) + runtime_nsecs = count[0]; + if (attrs[counter].type == PERF_TYPE_HARDWARE && + attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES) + runtime_cycles = count[0]; +} + +/* + * Print out the results of a single counter: + */ +static void print_counter(int counter) +{ + __u64 *count; + int scaled; + + count = event_res[counter]; + scaled = event_scaled[counter]; + + if (scaled == -1) { + fprintf(stderr, " %14s %-20s\n", + "", event_name(counter)); + return; + } + + if (nsec_counter(counter)) { + double msecs = (double)count[0] / 1000000; + + fprintf(stderr, " %14.6f %-20s", + msecs, event_name(counter)); + if (attrs[counter].type == PERF_TYPE_SOFTWARE && + attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) { + + if (walltime_nsecs) + fprintf(stderr, " # %11.3f CPU utilization factor", + (double)count[0] / (double)walltime_nsecs); + } + } else { + fprintf(stderr, " %14Ld %-20s", + count[0], event_name(counter)); + if (runtime_nsecs) + fprintf(stderr, " # %11.3f M/sec", + (double)count[0]/runtime_nsecs*1000.0); + if (runtime_cycles && + attrs[counter].type == PERF_TYPE_HARDWARE && + attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) { + + fprintf(stderr, " # %1.3f per cycle", + (double)count[0] / (double)runtime_cycles); + } + } + if (scaled) + fprintf(stderr, " (scaled from %.2f%%)", + (double) count[2] / count[1] * 100); + fprintf(stderr, "\n"); +} + +static int do_perf_stat(int argc, const char **argv) +{ + unsigned long long t0, t1; + int counter; + int status; + int pid; + int i; + + if (!system_wide) + nr_cpus = 1; + + for (counter = 0; counter < nr_counters; counter++) + create_perf_stat_counter(counter); + + /* + * Enable counters and exec the command: + */ + t0 = rdclock(); + prctl(PR_TASK_PERF_COUNTERS_ENABLE); + + if ((pid = fork()) < 0) + perror("failed to fork"); + + if (!pid) { + if (execvp(argv[0], (char **)argv)) { + perror(argv[0]); + exit(-1); + } + } + + while (wait(&status) >= 0) + ; + + prctl(PR_TASK_PERF_COUNTERS_DISABLE); + t1 = rdclock(); + + walltime_nsecs = t1 - t0; + + fflush(stdout); + + fprintf(stderr, "\n"); + fprintf(stderr, " Performance counter stats for \'%s", argv[0]); + + for (i = 1; i < argc; i++) + fprintf(stderr, " %s", argv[i]); + + fprintf(stderr, "\':\n"); + fprintf(stderr, "\n"); + + for (counter = 0; counter < nr_counters; counter++) + read_counter(counter); + + for (counter = 0; counter < nr_counters; counter++) + print_counter(counter); + + + fprintf(stderr, "\n"); + fprintf(stderr, " Wall-clock time elapsed: %12.6f msecs\n", + (double)(t1-t0)/1e6); + fprintf(stderr, "\n"); + + return 0; +} + +static volatile int signr = -1; + +static void skip_signal(int signo) +{ + signr = signo; +} + +static void sig_atexit(void) +{ + if (signr == -1) + return; + + signal(signr, SIG_DFL); + kill(getpid(), signr); +} + +static const char * const stat_usage[] = { + "perf stat [] ", + NULL +}; + +static const struct option options[] = { + OPT_CALLBACK('e', "event", NULL, "event", + "event selector. use 'perf list' to list available events", + parse_events), + OPT_BOOLEAN('i', "inherit", &inherit, + "child tasks inherit counters"), + OPT_INTEGER('p', "pid", &target_pid, + "stat events on existing pid"), + OPT_BOOLEAN('a', "all-cpus", &system_wide, + "system-wide collection from all CPUs"), + OPT_BOOLEAN('S', "scale", &scale, + "scale/normalize counters"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show counter open errors, etc)"), + OPT_END() +}; + +int cmd_stat(int argc, const char **argv, const char *prefix) +{ + page_size = sysconf(_SC_PAGE_SIZE); + + memcpy(attrs, default_attrs, sizeof(attrs)); + + argc = parse_options(argc, argv, options, stat_usage, 0); + if (!argc) + usage_with_options(stat_usage, options); + + if (!nr_counters) + nr_counters = 8; + + nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); + assert(nr_cpus <= MAX_NR_CPUS); + assert(nr_cpus >= 0); + + /* + * We dont want to block the signals - that would cause + * child tasks to inherit that and Ctrl-C would not work. + * What we want is for Ctrl-C to work in the exec()-ed + * task, but being ignored by perf stat itself: + */ + atexit(sig_atexit); + signal(SIGINT, skip_signal); + signal(SIGALRM, skip_signal); + signal(SIGABRT, skip_signal); + + return do_perf_stat(argc, argv); +} diff --git a/trunk/tools/perf/builtin-top.c b/trunk/tools/perf/builtin-top.c new file mode 100644 index 000000000000..fe338d3c5d7e --- /dev/null +++ b/trunk/tools/perf/builtin-top.c @@ -0,0 +1,736 @@ +/* + * builtin-top.c + * + * Builtin top command: Display a continuously updated profile of + * any workload, CPU or specific PID. + * + * Copyright (C) 2008, Red Hat Inc, Ingo Molnar + * + * Improvements and fixes by: + * + * Arjan van de Ven + * Yanmin Zhang + * Wu Fengguang + * Mike Galbraith + * Paul Mackerras + * + * Released under the GPL v2. (and only v2, not any later version) + */ +#include "builtin.h" + +#include "perf.h" + +#include "util/symbol.h" +#include "util/color.h" +#include "util/util.h" +#include "util/rbtree.h" +#include "util/parse-options.h" +#include "util/parse-events.h" + +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static int fd[MAX_NR_CPUS][MAX_COUNTERS]; + +static int system_wide = 0; + +static int default_interval = 100000; + +static __u64 count_filter = 5; +static int print_entries = 15; + +static int target_pid = -1; +static int profile_cpu = -1; +static int nr_cpus = 0; +static unsigned int realtime_prio = 0; +static int group = 0; +static unsigned int page_size; +static unsigned int mmap_pages = 16; +static int freq = 0; +static int verbose = 0; + +static char *sym_filter; +static unsigned long filter_start; +static unsigned long filter_end; + +static int delay_secs = 2; +static int zero; +static int dump_symtab; + +/* + * Symbols + */ + +static __u64 min_ip; +static __u64 max_ip = -1ll; + +struct sym_entry { + struct rb_node rb_node; + struct list_head node; + unsigned long count[MAX_COUNTERS]; + unsigned long snap_count; + double weight; + int skip; +}; + +struct sym_entry *sym_filter_entry; + +struct dso *kernel_dso; + +/* + * Symbols will be added here in record_ip and will get out + * after decayed. + */ +static LIST_HEAD(active_symbols); +static pthread_mutex_t active_symbols_lock = PTHREAD_MUTEX_INITIALIZER; + +/* + * Ordering weight: count-1 * count-2 * ... / count-n + */ +static double sym_weight(const struct sym_entry *sym) +{ + double weight = sym->snap_count; + int counter; + + for (counter = 1; counter < nr_counters-1; counter++) + weight *= sym->count[counter]; + + weight /= (sym->count[counter] + 1); + + return weight; +} + +static long samples; +static long userspace_samples; +static const char CONSOLE_CLEAR[] = ""; + +static void __list_insert_active_sym(struct sym_entry *syme) +{ + list_add(&syme->node, &active_symbols); +} + +static void list_remove_active_sym(struct sym_entry *syme) +{ + pthread_mutex_lock(&active_symbols_lock); + list_del_init(&syme->node); + pthread_mutex_unlock(&active_symbols_lock); +} + +static void rb_insert_active_sym(struct rb_root *tree, struct sym_entry *se) +{ + struct rb_node **p = &tree->rb_node; + struct rb_node *parent = NULL; + struct sym_entry *iter; + + while (*p != NULL) { + parent = *p; + iter = rb_entry(parent, struct sym_entry, rb_node); + + if (se->weight > iter->weight) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&se->rb_node, parent, p); + rb_insert_color(&se->rb_node, tree); +} + +static void print_sym_table(void) +{ + int printed = 0, j; + int counter; + float samples_per_sec = samples/delay_secs; + float ksamples_per_sec = (samples-userspace_samples)/delay_secs; + float sum_ksamples = 0.0; + struct sym_entry *syme, *n; + struct rb_root tmp = RB_ROOT; + struct rb_node *nd; + + samples = userspace_samples = 0; + + /* Sort the active symbols */ + pthread_mutex_lock(&active_symbols_lock); + syme = list_entry(active_symbols.next, struct sym_entry, node); + pthread_mutex_unlock(&active_symbols_lock); + + list_for_each_entry_safe_from(syme, n, &active_symbols, node) { + syme->snap_count = syme->count[0]; + if (syme->snap_count != 0) { + syme->weight = sym_weight(syme); + rb_insert_active_sym(&tmp, syme); + sum_ksamples += syme->snap_count; + + for (j = 0; j < nr_counters; j++) + syme->count[j] = zero ? 0 : syme->count[j] * 7 / 8; + } else + list_remove_active_sym(syme); + } + + puts(CONSOLE_CLEAR); + + printf( +"------------------------------------------------------------------------------\n"); + printf( " PerfTop:%8.0f irqs/sec kernel:%4.1f%% [", + samples_per_sec, + 100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec))); + + if (nr_counters == 1) { + printf("%Ld", attrs[0].sample_period); + if (freq) + printf("Hz "); + else + printf(" "); + } + + for (counter = 0; counter < nr_counters; counter++) { + if (counter) + printf("/"); + + printf("%s", event_name(counter)); + } + + printf( "], "); + + if (target_pid != -1) + printf(" (target_pid: %d", target_pid); + else + printf(" (all"); + + if (profile_cpu != -1) + printf(", cpu: %d)\n", profile_cpu); + else { + if (target_pid != -1) + printf(")\n"); + else + printf(", %d CPUs)\n", nr_cpus); + } + + printf("------------------------------------------------------------------------------\n\n"); + + if (nr_counters == 1) + printf(" samples pcnt"); + else + printf(" weight samples pcnt"); + + printf(" RIP kernel function\n" + " ______ _______ _____ ________________ _______________\n\n" + ); + + for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) { + struct sym_entry *syme = rb_entry(nd, struct sym_entry, rb_node); + struct symbol *sym = (struct symbol *)(syme + 1); + char *color = PERF_COLOR_NORMAL; + double pcnt; + + if (++printed > print_entries || syme->snap_count < count_filter) + continue; + + pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) / + sum_ksamples)); + + /* + * We color high-overhead entries in red, mid-overhead + * entries in green - and keep the low overhead places + * normal: + */ + if (pcnt >= 5.0) { + color = PERF_COLOR_RED; + } else { + if (pcnt >= 0.5) + color = PERF_COLOR_GREEN; + } + + if (nr_counters == 1) + printf("%20.2f - ", syme->weight); + else + printf("%9.1f %10ld - ", syme->weight, syme->snap_count); + + color_fprintf(stdout, color, "%4.1f%%", pcnt); + printf(" - %016llx : %s\n", sym->start, sym->name); + } +} + +static void *display_thread(void *arg) +{ + struct pollfd stdin_poll = { .fd = 0, .events = POLLIN }; + int delay_msecs = delay_secs * 1000; + + printf("PerfTop refresh period: %d seconds\n", delay_secs); + + do { + print_sym_table(); + } while (!poll(&stdin_poll, 1, delay_msecs) == 1); + + printf("key pressed - exiting.\n"); + exit(0); + + return NULL; +} + +static int symbol_filter(struct dso *self, struct symbol *sym) +{ + static int filter_match; + struct sym_entry *syme; + const char *name = sym->name; + + if (!strcmp(name, "_text") || + !strcmp(name, "_etext") || + !strcmp(name, "_sinittext") || + !strncmp("init_module", name, 11) || + !strncmp("cleanup_module", name, 14) || + strstr(name, "_text_start") || + strstr(name, "_text_end")) + return 1; + + syme = dso__sym_priv(self, sym); + /* Tag samples to be skipped. */ + if (!strcmp("default_idle", name) || + !strcmp("cpu_idle", name) || + !strcmp("enter_idle", name) || + !strcmp("exit_idle", name) || + !strcmp("mwait_idle", name)) + syme->skip = 1; + + if (filter_match == 1) { + filter_end = sym->start; + filter_match = -1; + if (filter_end - filter_start > 10000) { + fprintf(stderr, + "hm, too large filter symbol <%s> - skipping.\n", + sym_filter); + fprintf(stderr, "symbol filter start: %016lx\n", + filter_start); + fprintf(stderr, " end: %016lx\n", + filter_end); + filter_end = filter_start = 0; + sym_filter = NULL; + sleep(1); + } + } + + if (filter_match == 0 && sym_filter && !strcmp(name, sym_filter)) { + filter_match = 1; + filter_start = sym->start; + } + + + return 0; +} + +static int parse_symbols(void) +{ + struct rb_node *node; + struct symbol *sym; + + kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry)); + if (kernel_dso == NULL) + return -1; + + if (dso__load_kernel(kernel_dso, NULL, symbol_filter, 1) != 0) + goto out_delete_dso; + + node = rb_first(&kernel_dso->syms); + sym = rb_entry(node, struct symbol, rb_node); + min_ip = sym->start; + + node = rb_last(&kernel_dso->syms); + sym = rb_entry(node, struct symbol, rb_node); + max_ip = sym->end; + + if (dump_symtab) + dso__fprintf(kernel_dso, stderr); + + return 0; + +out_delete_dso: + dso__delete(kernel_dso); + kernel_dso = NULL; + return -1; +} + +#define TRACE_COUNT 3 + +/* + * Binary search in the histogram table and record the hit: + */ +static void record_ip(__u64 ip, int counter) +{ + struct symbol *sym = dso__find_symbol(kernel_dso, ip); + + if (sym != NULL) { + struct sym_entry *syme = dso__sym_priv(kernel_dso, sym); + + if (!syme->skip) { + syme->count[counter]++; + pthread_mutex_lock(&active_symbols_lock); + if (list_empty(&syme->node) || !syme->node.next) + __list_insert_active_sym(syme); + pthread_mutex_unlock(&active_symbols_lock); + return; + } + } + + samples--; +} + +static void process_event(__u64 ip, int counter) +{ + samples++; + + if (ip < min_ip || ip > max_ip) { + userspace_samples++; + return; + } + + record_ip(ip, counter); +} + +struct mmap_data { + int counter; + void *base; + unsigned int mask; + unsigned int prev; +}; + +static unsigned int mmap_read_head(struct mmap_data *md) +{ + struct perf_counter_mmap_page *pc = md->base; + int head; + + head = pc->data_head; + rmb(); + + return head; +} + +struct timeval last_read, this_read; + +static void mmap_read_counter(struct mmap_data *md) +{ + unsigned int head = mmap_read_head(md); + unsigned int old = md->prev; + unsigned char *data = md->base + page_size; + int diff; + + gettimeofday(&this_read, NULL); + + /* + * If we're further behind than half the buffer, there's a chance + * the writer will bite our tail and mess up the samples under us. + * + * If we somehow ended up ahead of the head, we got messed up. + * + * In either case, truncate and restart at head. + */ + diff = head - old; + if (diff > md->mask / 2 || diff < 0) { + struct timeval iv; + unsigned long msecs; + + timersub(&this_read, &last_read, &iv); + msecs = iv.tv_sec*1000 + iv.tv_usec/1000; + + fprintf(stderr, "WARNING: failed to keep up with mmap data." + " Last read %lu msecs ago.\n", msecs); + + /* + * head points to a known good entry, start there. + */ + old = head; + } + + last_read = this_read; + + for (; old != head;) { + struct ip_event { + struct perf_event_header header; + __u64 ip; + __u32 pid, target_pid; + }; + struct mmap_event { + struct perf_event_header header; + __u32 pid, target_pid; + __u64 start; + __u64 len; + __u64 pgoff; + char filename[PATH_MAX]; + }; + + typedef union event_union { + struct perf_event_header header; + struct ip_event ip; + struct mmap_event mmap; + } event_t; + + event_t *event = (event_t *)&data[old & md->mask]; + + event_t event_copy; + + size_t size = event->header.size; + + /* + * Event straddles the mmap boundary -- header should always + * be inside due to u64 alignment of output. + */ + if ((old & md->mask) + size != ((old + size) & md->mask)) { + unsigned int offset = old; + unsigned int len = min(sizeof(*event), size), cpy; + void *dst = &event_copy; + + do { + cpy = min(md->mask + 1 - (offset & md->mask), len); + memcpy(dst, &data[offset & md->mask], cpy); + offset += cpy; + dst += cpy; + len -= cpy; + } while (len); + + event = &event_copy; + } + + old += size; + + if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) { + if (event->header.type & PERF_SAMPLE_IP) + process_event(event->ip.ip, md->counter); + } + } + + md->prev = old; +} + +static struct pollfd event_array[MAX_NR_CPUS * MAX_COUNTERS]; +static struct mmap_data mmap_array[MAX_NR_CPUS][MAX_COUNTERS]; + +static void mmap_read(void) +{ + int i, counter; + + for (i = 0; i < nr_cpus; i++) { + for (counter = 0; counter < nr_counters; counter++) + mmap_read_counter(&mmap_array[i][counter]); + } +} + +int nr_poll; +int group_fd; + +static void start_counter(int i, int counter) +{ + struct perf_counter_attr *attr; + unsigned int cpu; + + cpu = profile_cpu; + if (target_pid == -1 && profile_cpu == -1) + cpu = i; + + attr = attrs + counter; + + attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID; + attr->freq = freq; + +try_again: + fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0); + + if (fd[i][counter] < 0) { + int err = errno; + + if (err == EPERM) + die("No permission - are you root?\n"); + /* + * If it's cycles then fall back to hrtimer + * based cpu-clock-tick sw counter, which + * is always available even if no PMU support: + */ + if (attr->type == PERF_TYPE_HARDWARE + && attr->config == PERF_COUNT_HW_CPU_CYCLES) { + + if (verbose) + warning(" ... trying to fall back to cpu-clock-ticks\n"); + + attr->type = PERF_TYPE_SOFTWARE; + attr->config = PERF_COUNT_SW_CPU_CLOCK; + goto try_again; + } + printf("\n"); + error("perfcounter syscall returned with %d (%s)\n", + fd[i][counter], strerror(err)); + die("No CONFIG_PERF_COUNTERS=y kernel support configured?\n"); + exit(-1); + } + assert(fd[i][counter] >= 0); + fcntl(fd[i][counter], F_SETFL, O_NONBLOCK); + + /* + * First counter acts as the group leader: + */ + if (group && group_fd == -1) + group_fd = fd[i][counter]; + + event_array[nr_poll].fd = fd[i][counter]; + event_array[nr_poll].events = POLLIN; + nr_poll++; + + mmap_array[i][counter].counter = counter; + mmap_array[i][counter].prev = 0; + mmap_array[i][counter].mask = mmap_pages*page_size - 1; + mmap_array[i][counter].base = mmap(NULL, (mmap_pages+1)*page_size, + PROT_READ, MAP_SHARED, fd[i][counter], 0); + if (mmap_array[i][counter].base == MAP_FAILED) + die("failed to mmap with %d (%s)\n", errno, strerror(errno)); +} + +static int __cmd_top(void) +{ + pthread_t thread; + int i, counter; + int ret; + + for (i = 0; i < nr_cpus; i++) { + group_fd = -1; + for (counter = 0; counter < nr_counters; counter++) + start_counter(i, counter); + } + + /* Wait for a minimal set of events before starting the snapshot */ + poll(event_array, nr_poll, 100); + + mmap_read(); + + if (pthread_create(&thread, NULL, display_thread, NULL)) { + printf("Could not create display thread.\n"); + exit(-1); + } + + if (realtime_prio) { + struct sched_param param; + + param.sched_priority = realtime_prio; + if (sched_setscheduler(0, SCHED_FIFO, ¶m)) { + printf("Could not set realtime priority.\n"); + exit(-1); + } + } + + while (1) { + int hits = samples; + + mmap_read(); + + if (hits == samples) + ret = poll(event_array, nr_poll, 100); + } + + return 0; +} + +static const char * const top_usage[] = { + "perf top []", + NULL +}; + +static const struct option options[] = { + OPT_CALLBACK('e', "event", NULL, "event", + "event selector. use 'perf list' to list available events", + parse_events), + OPT_INTEGER('c', "count", &default_interval, + "event period to sample"), + OPT_INTEGER('p', "pid", &target_pid, + "profile events on existing pid"), + OPT_BOOLEAN('a', "all-cpus", &system_wide, + "system-wide collection from all CPUs"), + OPT_INTEGER('C', "CPU", &profile_cpu, + "CPU to profile on"), + OPT_INTEGER('m', "mmap-pages", &mmap_pages, + "number of mmap data pages"), + OPT_INTEGER('r', "realtime", &realtime_prio, + "collect data with this RT SCHED_FIFO priority"), + OPT_INTEGER('d', "delay", &delay_secs, + "number of seconds to delay between refreshes"), + OPT_BOOLEAN('D', "dump-symtab", &dump_symtab, + "dump the symbol table used for profiling"), + OPT_INTEGER('f', "count-filter", &count_filter, + "only display functions with more events than this"), + OPT_BOOLEAN('g', "group", &group, + "put the counters into a counter group"), + OPT_STRING('s', "sym-filter", &sym_filter, "pattern", + "only display symbols matchig this pattern"), + OPT_BOOLEAN('z', "zero", &group, + "zero history across updates"), + OPT_INTEGER('F', "freq", &freq, + "profile at this frequency"), + OPT_INTEGER('E', "entries", &print_entries, + "display this many functions"), + OPT_BOOLEAN('v', "verbose", &verbose, + "be more verbose (show counter open errors, etc)"), + OPT_END() +}; + +int cmd_top(int argc, const char **argv, const char *prefix) +{ + int counter; + + page_size = sysconf(_SC_PAGE_SIZE); + + argc = parse_options(argc, argv, options, top_usage, 0); + if (argc) + usage_with_options(top_usage, options); + + if (freq) { + default_interval = freq; + freq = 1; + } + + /* CPU and PID are mutually exclusive */ + if (target_pid != -1 && profile_cpu != -1) { + printf("WARNING: PID switch overriding CPU\n"); + sleep(1); + profile_cpu = -1; + } + + if (!nr_counters) + nr_counters = 1; + + if (delay_secs < 1) + delay_secs = 1; + + parse_symbols(); + + /* + * Fill in the ones not specifically initialized via -c: + */ + for (counter = 0; counter < nr_counters; counter++) { + if (attrs[counter].sample_period) + continue; + + attrs[counter].sample_period = default_interval; + } + + nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); + assert(nr_cpus <= MAX_NR_CPUS); + assert(nr_cpus >= 0); + + if (target_pid != -1 || profile_cpu != -1) + nr_cpus = 1; + + return __cmd_top(); +} diff --git a/trunk/tools/perf/builtin.h b/trunk/tools/perf/builtin.h new file mode 100644 index 000000000000..51d168230ee7 --- /dev/null +++ b/trunk/tools/perf/builtin.h @@ -0,0 +1,26 @@ +#ifndef BUILTIN_H +#define BUILTIN_H + +#include "util/util.h" +#include "util/strbuf.h" + +extern const char perf_version_string[]; +extern const char perf_usage_string[]; +extern const char perf_more_info_string[]; + +extern void list_common_cmds_help(void); +extern const char *help_unknown_cmd(const char *cmd); +extern void prune_packed_objects(int); +extern int read_line_with_nul(char *buf, int size, FILE *file); +extern int check_pager_config(const char *cmd); + +extern int cmd_annotate(int argc, const char **argv, const char *prefix); +extern int cmd_help(int argc, const char **argv, const char *prefix); +extern int cmd_record(int argc, const char **argv, const char *prefix); +extern int cmd_report(int argc, const char **argv, const char *prefix); +extern int cmd_stat(int argc, const char **argv, const char *prefix); +extern int cmd_top(int argc, const char **argv, const char *prefix); +extern int cmd_version(int argc, const char **argv, const char *prefix); +extern int cmd_list(int argc, const char **argv, const char *prefix); + +#endif diff --git a/trunk/tools/perf/command-list.txt b/trunk/tools/perf/command-list.txt new file mode 100644 index 000000000000..eebce30afbc0 --- /dev/null +++ b/trunk/tools/perf/command-list.txt @@ -0,0 +1,10 @@ +# +# List of known perf commands. +# command name category [deprecated] [common] +# +perf-annotate mainporcelain common +perf-list mainporcelain common +perf-record mainporcelain common +perf-report mainporcelain common +perf-stat mainporcelain common +perf-top mainporcelain common diff --git a/trunk/tools/perf/design.txt b/trunk/tools/perf/design.txt new file mode 100644 index 000000000000..860e116d979c --- /dev/null +++ b/trunk/tools/perf/design.txt @@ -0,0 +1,442 @@ + +Performance Counters for Linux +------------------------------ + +Performance counters are special hardware registers available on most modern +CPUs. These registers count the number of certain types of hw events: such +as instructions executed, cachemisses suffered, or branches mis-predicted - +without slowing down the kernel or applications. These registers can also +trigger interrupts when a threshold number of events have passed - and can +thus be used to profile the code that runs on that CPU. + +The Linux Performance Counter subsystem provides an abstraction of these +hardware capabilities. It provides per task and per CPU counters, counter +groups, and it provides event capabilities on top of those. It +provides "virtual" 64-bit counters, regardless of the width of the +underlying hardware counters. + +Performance counters are accessed via special file descriptors. +There's one file descriptor per virtual counter used. + +The special file descriptor is opened via the perf_counter_open() +system call: + + int sys_perf_counter_open(struct perf_counter_hw_event *hw_event_uptr, + pid_t pid, int cpu, int group_fd, + unsigned long flags); + +The syscall returns the new fd. The fd can be used via the normal +VFS system calls: read() can be used to read the counter, fcntl() +can be used to set the blocking mode, etc. + +Multiple counters can be kept open at a time, and the counters +can be poll()ed. + +When creating a new counter fd, 'perf_counter_hw_event' is: + +struct perf_counter_hw_event { + /* + * The MSB of the config word signifies if the rest contains cpu + * specific (raw) counter configuration data, if unset, the next + * 7 bits are an event type and the rest of the bits are the event + * identifier. + */ + __u64 config; + + __u64 irq_period; + __u32 record_type; + __u32 read_format; + + __u64 disabled : 1, /* off by default */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + munmap : 1, /* include munmap data */ + comm : 1, /* include comm data */ + + __reserved_1 : 52; + + __u32 extra_config_len; + __u32 wakeup_events; /* wakeup every n events */ + + __u64 __reserved_2; + __u64 __reserved_3; +}; + +The 'config' field specifies what the counter should count. It +is divided into 3 bit-fields: + +raw_type: 1 bit (most significant bit) 0x8000_0000_0000_0000 +type: 7 bits (next most significant) 0x7f00_0000_0000_0000 +event_id: 56 bits (least significant) 0x00ff_ffff_ffff_ffff + +If 'raw_type' is 1, then the counter will count a hardware event +specified by the remaining 63 bits of event_config. The encoding is +machine-specific. + +If 'raw_type' is 0, then the 'type' field says what kind of counter +this is, with the following encoding: + +enum perf_event_types { + PERF_TYPE_HARDWARE = 0, + PERF_TYPE_SOFTWARE = 1, + PERF_TYPE_TRACEPOINT = 2, +}; + +A counter of PERF_TYPE_HARDWARE will count the hardware event +specified by 'event_id': + +/* + * Generalized performance counter event types, used by the hw_event.event_id + * parameter of the sys_perf_counter_open() syscall: + */ +enum hw_event_ids { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_HW_CPU_CYCLES = 0, + PERF_COUNT_HW_INSTRUCTIONS = 1, + PERF_COUNT_HW_CACHE_REFERENCES = 2, + PERF_COUNT_HW_CACHE_MISSES = 3, + PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_HW_BRANCH_MISSES = 5, + PERF_COUNT_HW_BUS_CYCLES = 6, +}; + +These are standardized types of events that work relatively uniformly +on all CPUs that implement Performance Counters support under Linux, +although there may be variations (e.g., different CPUs might count +cache references and misses at different levels of the cache hierarchy). +If a CPU is not able to count the selected event, then the system call +will return -EINVAL. + +More hw_event_types are supported as well, but they are CPU-specific +and accessed as raw events. For example, to count "External bus +cycles while bus lock signal asserted" events on Intel Core CPUs, pass +in a 0x4064 event_id value and set hw_event.raw_type to 1. + +A counter of type PERF_TYPE_SOFTWARE will count one of the available +software events, selected by 'event_id': + +/* + * Special "software" counters provided by the kernel, even if the hardware + * does not support performance counters. These counters measure various + * physical and sw events of the kernel (and allow the profiling of them as + * well): + */ +enum sw_event_ids { + PERF_COUNT_SW_CPU_CLOCK = 0, + PERF_COUNT_SW_TASK_CLOCK = 1, + PERF_COUNT_SW_PAGE_FAULTS = 2, + PERF_COUNT_SW_CONTEXT_SWITCHES = 3, + PERF_COUNT_SW_CPU_MIGRATIONS = 4, + PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, + PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, +}; + +Counters of the type PERF_TYPE_TRACEPOINT are available when the ftrace event +tracer is available, and event_id values can be obtained from +/debug/tracing/events/*/*/id + + +Counters come in two flavours: counting counters and sampling +counters. A "counting" counter is one that is used for counting the +number of events that occur, and is characterised by having +irq_period = 0. + + +A read() on a counter returns the current value of the counter and possible +additional values as specified by 'read_format', each value is a u64 (8 bytes) +in size. + +/* + * Bits that can be set in hw_event.read_format to request that + * reads on the counter should return the indicated quantities, + * in increasing order of bit value, after the counter value. + */ +enum perf_counter_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1, + PERF_FORMAT_TOTAL_TIME_RUNNING = 2, +}; + +Using these additional values one can establish the overcommit ratio for a +particular counter allowing one to take the round-robin scheduling effect +into account. + + +A "sampling" counter is one that is set up to generate an interrupt +every N events, where N is given by 'irq_period'. A sampling counter +has irq_period > 0. The record_type controls what data is recorded on each +interrupt: + +/* + * Bits that can be set in hw_event.record_type to request information + * in the overflow packets. + */ +enum perf_counter_record_format { + PERF_RECORD_IP = 1U << 0, + PERF_RECORD_TID = 1U << 1, + PERF_RECORD_TIME = 1U << 2, + PERF_RECORD_ADDR = 1U << 3, + PERF_RECORD_GROUP = 1U << 4, + PERF_RECORD_CALLCHAIN = 1U << 5, +}; + +Such (and other) events will be recorded in a ring-buffer, which is +available to user-space using mmap() (see below). + +The 'disabled' bit specifies whether the counter starts out disabled +or enabled. If it is initially disabled, it can be enabled by ioctl +or prctl (see below). + +The 'inherit' bit, if set, specifies that this counter should count +events on descendant tasks as well as the task specified. This only +applies to new descendents, not to any existing descendents at the +time the counter is created (nor to any new descendents of existing +descendents). + +The 'pinned' bit, if set, specifies that the counter should always be +on the CPU if at all possible. It only applies to hardware counters +and only to group leaders. If a pinned counter cannot be put onto the +CPU (e.g. because there are not enough hardware counters or because of +a conflict with some other event), then the counter goes into an +'error' state, where reads return end-of-file (i.e. read() returns 0) +until the counter is subsequently enabled or disabled. + +The 'exclusive' bit, if set, specifies that when this counter's group +is on the CPU, it should be the only group using the CPU's counters. +In future, this will allow sophisticated monitoring programs to supply +extra configuration information via 'extra_config_len' to exploit +advanced features of the CPU's Performance Monitor Unit (PMU) that are +not otherwise accessible and that might disrupt other hardware +counters. + +The 'exclude_user', 'exclude_kernel' and 'exclude_hv' bits provide a +way to request that counting of events be restricted to times when the +CPU is in user, kernel and/or hypervisor mode. + +The 'mmap' and 'munmap' bits allow recording of PROT_EXEC mmap/munmap +operations, these can be used to relate userspace IP addresses to actual +code, even after the mapping (or even the whole process) is gone, +these events are recorded in the ring-buffer (see below). + +The 'comm' bit allows tracking of process comm data on process creation. +This too is recorded in the ring-buffer (see below). + +The 'pid' parameter to the perf_counter_open() system call allows the +counter to be specific to a task: + + pid == 0: if the pid parameter is zero, the counter is attached to the + current task. + + pid > 0: the counter is attached to a specific task (if the current task + has sufficient privilege to do so) + + pid < 0: all tasks are counted (per cpu counters) + +The 'cpu' parameter allows a counter to be made specific to a CPU: + + cpu >= 0: the counter is restricted to a specific CPU + cpu == -1: the counter counts on all CPUs + +(Note: the combination of 'pid == -1' and 'cpu == -1' is not valid.) + +A 'pid > 0' and 'cpu == -1' counter is a per task counter that counts +events of that task and 'follows' that task to whatever CPU the task +gets schedule to. Per task counters can be created by any user, for +their own tasks. + +A 'pid == -1' and 'cpu == x' counter is a per CPU counter that counts +all events on CPU-x. Per CPU counters need CAP_SYS_ADMIN privilege. + +The 'flags' parameter is currently unused and must be zero. + +The 'group_fd' parameter allows counter "groups" to be set up. A +counter group has one counter which is the group "leader". The leader +is created first, with group_fd = -1 in the perf_counter_open call +that creates it. The rest of the group members are created +subsequently, with group_fd giving the fd of the group leader. +(A single counter on its own is created with group_fd = -1 and is +considered to be a group with only 1 member.) + +A counter group is scheduled onto the CPU as a unit, that is, it will +only be put onto the CPU if all of the counters in the group can be +put onto the CPU. This means that the values of the member counters +can be meaningfully compared, added, divided (to get ratios), etc., +with each other, since they have counted events for the same set of +executed instructions. + + +Like stated, asynchronous events, like counter overflow or PROT_EXEC mmap +tracking are logged into a ring-buffer. This ring-buffer is created and +accessed through mmap(). + +The mmap size should be 1+2^n pages, where the first page is a meta-data page +(struct perf_counter_mmap_page) that contains various bits of information such +as where the ring-buffer head is. + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_counter_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the hw counters in user-space. + * + * u32 seq; + * s64 count; + * + * do { + * seq = pc->lock; + * + * barrier() + * if (pc->index) { + * count = pmc_read(pc->index - 1); + * count += pc->offset; + * } else + * goto regular_read; + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware counter identifier */ + __s64 offset; /* add to hardware counter value */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading this value should issue an rmb(), on SMP capable + * platforms, after reading this value -- see perf_counter_wakeup(). + */ + __u32 data_head; /* head in the data section */ +}; + +NOTE: the hw-counter userspace bits are arch specific and are currently only + implemented on powerpc. + +The following 2^n pages are the ring-buffer which contains events of the form: + +#define PERF_EVENT_MISC_KERNEL (1 << 0) +#define PERF_EVENT_MISC_USER (1 << 1) +#define PERF_EVENT_MISC_OVERFLOW (1 << 2) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +enum perf_event_type { + + /* + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate userspace IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * }; + */ + PERF_EVENT_MMAP = 1, + PERF_EVENT_MUNMAP = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * }; + */ + PERF_EVENT_COMM = 3, + + /* + * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field + * will be PERF_RECORD_* + * + * struct { + * struct perf_event_header header; + * + * { u64 ip; } && PERF_RECORD_IP + * { u32 pid, tid; } && PERF_RECORD_TID + * { u64 time; } && PERF_RECORD_TIME + * { u64 addr; } && PERF_RECORD_ADDR + * + * { u64 nr; + * { u64 event, val; } cnt[nr]; } && PERF_RECORD_GROUP + * + * { u16 nr, + * hv, + * kernel, + * user; + * u64 ips[nr]; } && PERF_RECORD_CALLCHAIN + * }; + */ +}; + +NOTE: PERF_RECORD_CALLCHAIN is arch specific and currently only implemented + on x86. + +Notification of new events is possible through poll()/select()/epoll() and +fcntl() managing signals. + +Normally a notification is generated for every page filled, however one can +additionally set perf_counter_hw_event.wakeup_events to generate one every +so many counter overflow events. + +Future work will include a splice() interface to the ring-buffer. + + +Counters can be enabled and disabled in two ways: via ioctl and via +prctl. When a counter is disabled, it doesn't count or generate +events but does continue to exist and maintain its count value. + +An individual counter or counter group can be enabled with + + ioctl(fd, PERF_COUNTER_IOC_ENABLE); + +or disabled with + + ioctl(fd, PERF_COUNTER_IOC_DISABLE); + +Enabling or disabling the leader of a group enables or disables the +whole group; that is, while the group leader is disabled, none of the +counters in the group will count. Enabling or disabling a member of a +group other than the leader only affects that counter - disabling an +non-leader stops that counter from counting but doesn't affect any +other counter. + +Additionally, non-inherited overflow counters can use + + ioctl(fd, PERF_COUNTER_IOC_REFRESH, nr); + +to enable a counter for 'nr' events, after which it gets disabled again. + +A process can enable or disable all the counter groups that are +attached to it, using prctl: + + prctl(PR_TASK_PERF_COUNTERS_ENABLE); + + prctl(PR_TASK_PERF_COUNTERS_DISABLE); + +This applies to all counters on the current process, whether created +by this process or by another, and doesn't affect any counters that +this process has created on other processes. It only enables or +disables the group leaders, not any other members in the groups. + diff --git a/trunk/tools/perf/perf.c b/trunk/tools/perf/perf.c new file mode 100644 index 000000000000..4eb725933703 --- /dev/null +++ b/trunk/tools/perf/perf.c @@ -0,0 +1,428 @@ +/* + * perf.c + * + * Performance analysis utility. + * + * This is the main hub from which the sub-commands (perf stat, + * perf top, perf record, perf report, etc.) are started. + */ +#include "builtin.h" + +#include "util/exec_cmd.h" +#include "util/cache.h" +#include "util/quote.h" +#include "util/run-command.h" + +const char perf_usage_string[] = + "perf [--version] [--help] COMMAND [ARGS]"; + +const char perf_more_info_string[] = + "See 'perf help COMMAND' for more information on a specific command."; + +static int use_pager = -1; +struct pager_config { + const char *cmd; + int val; +}; + +static int pager_command_config(const char *var, const char *value, void *data) +{ + struct pager_config *c = data; + if (!prefixcmp(var, "pager.") && !strcmp(var + 6, c->cmd)) + c->val = perf_config_bool(var, value); + return 0; +} + +/* returns 0 for "no pager", 1 for "use pager", and -1 for "not specified" */ +int check_pager_config(const char *cmd) +{ + struct pager_config c; + c.cmd = cmd; + c.val = -1; + perf_config(pager_command_config, &c); + return c.val; +} + +static void commit_pager_choice(void) { + switch (use_pager) { + case 0: + setenv("PERF_PAGER", "cat", 1); + break; + case 1: + /* setup_pager(); */ + break; + default: + break; + } +} + +static int handle_options(const char*** argv, int* argc, int* envchanged) +{ + int handled = 0; + + while (*argc > 0) { + const char *cmd = (*argv)[0]; + if (cmd[0] != '-') + break; + + /* + * For legacy reasons, the "version" and "help" + * commands can be written with "--" prepended + * to make them look like flags. + */ + if (!strcmp(cmd, "--help") || !strcmp(cmd, "--version")) + break; + + /* + * Check remaining flags. + */ + if (!prefixcmp(cmd, "--exec-path")) { + cmd += 11; + if (*cmd == '=') + perf_set_argv_exec_path(cmd + 1); + else { + puts(perf_exec_path()); + exit(0); + } + } else if (!strcmp(cmd, "--html-path")) { + puts(system_path(PERF_HTML_PATH)); + exit(0); + } else if (!strcmp(cmd, "-p") || !strcmp(cmd, "--paginate")) { + use_pager = 1; + } else if (!strcmp(cmd, "--no-pager")) { + use_pager = 0; + if (envchanged) + *envchanged = 1; + } else if (!strcmp(cmd, "--perf-dir")) { + if (*argc < 2) { + fprintf(stderr, "No directory given for --perf-dir.\n" ); + usage(perf_usage_string); + } + setenv(PERF_DIR_ENVIRONMENT, (*argv)[1], 1); + if (envchanged) + *envchanged = 1; + (*argv)++; + (*argc)--; + handled++; + } else if (!prefixcmp(cmd, "--perf-dir=")) { + setenv(PERF_DIR_ENVIRONMENT, cmd + 10, 1); + if (envchanged) + *envchanged = 1; + } else if (!strcmp(cmd, "--work-tree")) { + if (*argc < 2) { + fprintf(stderr, "No directory given for --work-tree.\n" ); + usage(perf_usage_string); + } + setenv(PERF_WORK_TREE_ENVIRONMENT, (*argv)[1], 1); + if (envchanged) + *envchanged = 1; + (*argv)++; + (*argc)--; + } else if (!prefixcmp(cmd, "--work-tree=")) { + setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1); + if (envchanged) + *envchanged = 1; + } else { + fprintf(stderr, "Unknown option: %s\n", cmd); + usage(perf_usage_string); + } + + (*argv)++; + (*argc)--; + handled++; + } + return handled; +} + +static int handle_alias(int *argcp, const char ***argv) +{ + int envchanged = 0, ret = 0, saved_errno = errno; + int count, option_count; + const char** new_argv; + const char *alias_command; + char *alias_string; + + alias_command = (*argv)[0]; + alias_string = alias_lookup(alias_command); + if (alias_string) { + if (alias_string[0] == '!') { + if (*argcp > 1) { + struct strbuf buf; + + strbuf_init(&buf, PATH_MAX); + strbuf_addstr(&buf, alias_string); + sq_quote_argv(&buf, (*argv) + 1, PATH_MAX); + free(alias_string); + alias_string = buf.buf; + } + ret = system(alias_string + 1); + if (ret >= 0 && WIFEXITED(ret) && + WEXITSTATUS(ret) != 127) + exit(WEXITSTATUS(ret)); + die("Failed to run '%s' when expanding alias '%s'", + alias_string + 1, alias_command); + } + count = split_cmdline(alias_string, &new_argv); + if (count < 0) + die("Bad alias.%s string", alias_command); + option_count = handle_options(&new_argv, &count, &envchanged); + if (envchanged) + die("alias '%s' changes environment variables\n" + "You can use '!perf' in the alias to do this.", + alias_command); + memmove(new_argv - option_count, new_argv, + count * sizeof(char *)); + new_argv -= option_count; + + if (count < 1) + die("empty alias for %s", alias_command); + + if (!strcmp(alias_command, new_argv[0])) + die("recursive alias: %s", alias_command); + + new_argv = realloc(new_argv, sizeof(char*) * + (count + *argcp + 1)); + /* insert after command name */ + memcpy(new_argv + count, *argv + 1, sizeof(char*) * *argcp); + new_argv[count+*argcp] = NULL; + + *argv = new_argv; + *argcp += count - 1; + + ret = 1; + } + + errno = saved_errno; + + return ret; +} + +const char perf_version_string[] = PERF_VERSION; + +#define RUN_SETUP (1<<0) +#define USE_PAGER (1<<1) +/* + * require working tree to be present -- anything uses this needs + * RUN_SETUP for reading from the configuration file. + */ +#define NEED_WORK_TREE (1<<2) + +struct cmd_struct { + const char *cmd; + int (*fn)(int, const char **, const char *); + int option; +}; + +static int run_builtin(struct cmd_struct *p, int argc, const char **argv) +{ + int status; + struct stat st; + const char *prefix; + + prefix = NULL; + if (p->option & RUN_SETUP) + prefix = NULL; /* setup_perf_directory(); */ + + if (use_pager == -1 && p->option & RUN_SETUP) + use_pager = check_pager_config(p->cmd); + if (use_pager == -1 && p->option & USE_PAGER) + use_pager = 1; + commit_pager_choice(); + + if (p->option & NEED_WORK_TREE) + /* setup_work_tree() */; + + status = p->fn(argc, argv, prefix); + if (status) + return status & 0xff; + + /* Somebody closed stdout? */ + if (fstat(fileno(stdout), &st)) + return 0; + /* Ignore write errors for pipes and sockets.. */ + if (S_ISFIFO(st.st_mode) || S_ISSOCK(st.st_mode)) + return 0; + + /* Check for ENOSPC and EIO errors.. */ + if (fflush(stdout)) + die("write failure on standard output: %s", strerror(errno)); + if (ferror(stdout)) + die("unknown write failure on standard output"); + if (fclose(stdout)) + die("close failed on standard output: %s", strerror(errno)); + return 0; +} + +static void handle_internal_command(int argc, const char **argv) +{ + const char *cmd = argv[0]; + static struct cmd_struct commands[] = { + { "help", cmd_help, 0 }, + { "list", cmd_list, 0 }, + { "record", cmd_record, 0 }, + { "report", cmd_report, 0 }, + { "stat", cmd_stat, 0 }, + { "top", cmd_top, 0 }, + { "annotate", cmd_annotate, 0 }, + { "version", cmd_version, 0 }, + }; + int i; + static const char ext[] = STRIP_EXTENSION; + + if (sizeof(ext) > 1) { + i = strlen(argv[0]) - strlen(ext); + if (i > 0 && !strcmp(argv[0] + i, ext)) { + char *argv0 = strdup(argv[0]); + argv[0] = cmd = argv0; + argv0[i] = '\0'; + } + } + + /* Turn "perf cmd --help" into "perf help cmd" */ + if (argc > 1 && !strcmp(argv[1], "--help")) { + argv[1] = argv[0]; + argv[0] = cmd = "help"; + } + + for (i = 0; i < ARRAY_SIZE(commands); i++) { + struct cmd_struct *p = commands+i; + if (strcmp(p->cmd, cmd)) + continue; + exit(run_builtin(p, argc, argv)); + } +} + +static void execv_dashed_external(const char **argv) +{ + struct strbuf cmd = STRBUF_INIT; + const char *tmp; + int status; + + strbuf_addf(&cmd, "perf-%s", argv[0]); + + /* + * argv[0] must be the perf command, but the argv array + * belongs to the caller, and may be reused in + * subsequent loop iterations. Save argv[0] and + * restore it on error. + */ + tmp = argv[0]; + argv[0] = cmd.buf; + + /* + * if we fail because the command is not found, it is + * OK to return. Otherwise, we just pass along the status code. + */ + status = run_command_v_opt(argv, 0); + if (status != -ERR_RUN_COMMAND_EXEC) { + if (IS_RUN_COMMAND_ERR(status)) + die("unable to run '%s'", argv[0]); + exit(-status); + } + errno = ENOENT; /* as if we called execvp */ + + argv[0] = tmp; + + strbuf_release(&cmd); +} + +static int run_argv(int *argcp, const char ***argv) +{ + int done_alias = 0; + + while (1) { + /* See if it's an internal command */ + handle_internal_command(*argcp, *argv); + + /* .. then try the external ones */ + execv_dashed_external(*argv); + + /* It could be an alias -- this works around the insanity + * of overriding "perf log" with "perf show" by having + * alias.log = show + */ + if (done_alias || !handle_alias(argcp, argv)) + break; + done_alias = 1; + } + + return done_alias; +} + + +int main(int argc, const char **argv) +{ + const char *cmd; + + cmd = perf_extract_argv0_path(argv[0]); + if (!cmd) + cmd = "perf-help"; + + /* + * "perf-xxxx" is the same as "perf xxxx", but we obviously: + * + * - cannot take flags in between the "perf" and the "xxxx". + * - cannot execute it externally (since it would just do + * the same thing over again) + * + * So we just directly call the internal command handler, and + * die if that one cannot handle it. + */ + if (!prefixcmp(cmd, "perf-")) { + cmd += 5; + argv[0] = cmd; + handle_internal_command(argc, argv); + die("cannot handle %s internally", cmd); + } + + /* Look for flags.. */ + argv++; + argc--; + handle_options(&argv, &argc, NULL); + commit_pager_choice(); + if (argc > 0) { + if (!prefixcmp(argv[0], "--")) + argv[0] += 2; + } else { + /* The user didn't specify a command; give them help */ + printf("\n usage: %s\n\n", perf_usage_string); + list_common_cmds_help(); + printf("\n %s\n\n", perf_more_info_string); + exit(1); + } + cmd = argv[0]; + + /* + * We use PATH to find perf commands, but we prepend some higher + * precidence paths: the "--exec-path" option, the PERF_EXEC_PATH + * environment, and the $(perfexecdir) from the Makefile at build + * time. + */ + setup_path(); + + while (1) { + static int done_help = 0; + static int was_alias = 0; + + was_alias = run_argv(&argc, &argv); + if (errno != ENOENT) + break; + + if (was_alias) { + fprintf(stderr, "Expansion of alias '%s' failed; " + "'%s' is not a perf-command\n", + cmd, argv[0]); + exit(1); + } + if (!done_help) { + cmd = argv[0] = help_unknown_cmd(cmd); + done_help = 1; + } else + break; + } + + fprintf(stderr, "Failed to run command '%s': %s\n", + cmd, strerror(errno)); + + return 1; +} diff --git a/trunk/tools/perf/perf.h b/trunk/tools/perf/perf.h new file mode 100644 index 000000000000..af0a5046d743 --- /dev/null +++ b/trunk/tools/perf/perf.h @@ -0,0 +1,67 @@ +#ifndef _PERF_PERF_H +#define _PERF_PERF_H + +#if defined(__x86_64__) || defined(__i386__) +#include "../../arch/x86/include/asm/unistd.h" +#define rmb() asm volatile("lfence" ::: "memory") +#define cpu_relax() asm volatile("rep; nop" ::: "memory"); +#endif + +#ifdef __powerpc__ +#include "../../arch/powerpc/include/asm/unistd.h" +#define rmb() asm volatile ("sync" ::: "memory") +#define cpu_relax() asm volatile ("" ::: "memory"); +#endif + +#include +#include +#include +#include + +#include "../../include/linux/perf_counter.h" + +/* + * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all + * counters in the current task. + */ +#define PR_TASK_PERF_COUNTERS_DISABLE 31 +#define PR_TASK_PERF_COUNTERS_ENABLE 32 + +#ifndef NSEC_PER_SEC +# define NSEC_PER_SEC 1000000000ULL +#endif + +static inline unsigned long long rdclock(void) +{ + struct timespec ts; + + clock_gettime(CLOCK_MONOTONIC, &ts); + return ts.tv_sec * 1000000000ULL + ts.tv_nsec; +} + +/* + * Pick up some kernel type conventions: + */ +#define __user +#define asmlinkage + +#define unlikely(x) __builtin_expect(!!(x), 0) +#define min(x, y) ({ \ + typeof(x) _min1 = (x); \ + typeof(y) _min2 = (y); \ + (void) (&_min1 == &_min2); \ + _min1 < _min2 ? _min1 : _min2; }) + +static inline int +sys_perf_counter_open(struct perf_counter_attr *attr_uptr, + pid_t pid, int cpu, int group_fd, + unsigned long flags) +{ + return syscall(__NR_perf_counter_open, attr_uptr, pid, cpu, + group_fd, flags); +} + +#define MAX_COUNTERS 256 +#define MAX_NR_CPUS 256 + +#endif diff --git a/trunk/tools/perf/util/PERF-VERSION-GEN b/trunk/tools/perf/util/PERF-VERSION-GEN new file mode 100755 index 000000000000..c561d1538c03 --- /dev/null +++ b/trunk/tools/perf/util/PERF-VERSION-GEN @@ -0,0 +1,42 @@ +#!/bin/sh + +GVF=PERF-VERSION-FILE +DEF_VER=v0.0.1.PERF + +LF=' +' + +# First see if there is a version file (included in release tarballs), +# then try git-describe, then default. +if test -f version +then + VN=$(cat version) || VN="$DEF_VER" +elif test -d .git -o -f .git && + VN=$(git describe --abbrev=4 HEAD 2>/dev/null) && + case "$VN" in + *$LF*) (exit 1) ;; + v[0-9]*) + git update-index -q --refresh + test -z "$(git diff-index --name-only HEAD --)" || + VN="$VN-dirty" ;; + esac +then + VN=$(echo "$VN" | sed -e 's/-/./g'); +else + VN="$DEF_VER" +fi + +VN=$(expr "$VN" : v*'\(.*\)') + +if test -r $GVF +then + VC=$(sed -e 's/^PERF_VERSION = //' <$GVF) +else + VC=unset +fi +test "$VN" = "$VC" || { + echo >&2 "PERF_VERSION = $VN" + echo "PERF_VERSION = $VN" >$GVF +} + + diff --git a/trunk/tools/perf/util/abspath.c b/trunk/tools/perf/util/abspath.c new file mode 100644 index 000000000000..61d33b81fc97 --- /dev/null +++ b/trunk/tools/perf/util/abspath.c @@ -0,0 +1,117 @@ +#include "cache.h" + +/* + * Do not use this for inspecting *tracked* content. When path is a + * symlink to a directory, we do not want to say it is a directory when + * dealing with tracked content in the working tree. + */ +static int is_directory(const char *path) +{ + struct stat st; + return (!stat(path, &st) && S_ISDIR(st.st_mode)); +} + +/* We allow "recursive" symbolic links. Only within reason, though. */ +#define MAXDEPTH 5 + +const char *make_absolute_path(const char *path) +{ + static char bufs[2][PATH_MAX + 1], *buf = bufs[0], *next_buf = bufs[1]; + char cwd[1024] = ""; + int buf_index = 1, len; + + int depth = MAXDEPTH; + char *last_elem = NULL; + struct stat st; + + if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX) + die ("Too long path: %.*s", 60, path); + + while (depth--) { + if (!is_directory(buf)) { + char *last_slash = strrchr(buf, '/'); + if (last_slash) { + *last_slash = '\0'; + last_elem = xstrdup(last_slash + 1); + } else { + last_elem = xstrdup(buf); + *buf = '\0'; + } + } + + if (*buf) { + if (!*cwd && !getcwd(cwd, sizeof(cwd))) + die ("Could not get current working directory"); + + if (chdir(buf)) + die ("Could not switch to '%s'", buf); + } + if (!getcwd(buf, PATH_MAX)) + die ("Could not get current working directory"); + + if (last_elem) { + int len = strlen(buf); + if (len + strlen(last_elem) + 2 > PATH_MAX) + die ("Too long path name: '%s/%s'", + buf, last_elem); + buf[len] = '/'; + strcpy(buf + len + 1, last_elem); + free(last_elem); + last_elem = NULL; + } + + if (!lstat(buf, &st) && S_ISLNK(st.st_mode)) { + len = readlink(buf, next_buf, PATH_MAX); + if (len < 0) + die ("Invalid symlink: %s", buf); + if (PATH_MAX <= len) + die("symbolic link too long: %s", buf); + next_buf[len] = '\0'; + buf = next_buf; + buf_index = 1 - buf_index; + next_buf = bufs[buf_index]; + } else + break; + } + + if (*cwd && chdir(cwd)) + die ("Could not change back to '%s'", cwd); + + return buf; +} + +static const char *get_pwd_cwd(void) +{ + static char cwd[PATH_MAX + 1]; + char *pwd; + struct stat cwd_stat, pwd_stat; + if (getcwd(cwd, PATH_MAX) == NULL) + return NULL; + pwd = getenv("PWD"); + if (pwd && strcmp(pwd, cwd)) { + stat(cwd, &cwd_stat); + if (!stat(pwd, &pwd_stat) && + pwd_stat.st_dev == cwd_stat.st_dev && + pwd_stat.st_ino == cwd_stat.st_ino) { + strlcpy(cwd, pwd, PATH_MAX); + } + } + return cwd; +} + +const char *make_nonrelative_path(const char *path) +{ + static char buf[PATH_MAX + 1]; + + if (is_absolute_path(path)) { + if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX) + die("Too long path: %.*s", 60, path); + } else { + const char *cwd = get_pwd_cwd(); + if (!cwd) + die("Cannot determine the current working directory"); + if (snprintf(buf, PATH_MAX, "%s/%s", cwd, path) >= PATH_MAX) + die("Too long path: %.*s", 60, path); + } + return buf; +} diff --git a/trunk/tools/perf/util/alias.c b/trunk/tools/perf/util/alias.c new file mode 100644 index 000000000000..9b3dd2b428df --- /dev/null +++ b/trunk/tools/perf/util/alias.c @@ -0,0 +1,77 @@ +#include "cache.h" + +static const char *alias_key; +static char *alias_val; + +static int alias_lookup_cb(const char *k, const char *v, void *cb) +{ + if (!prefixcmp(k, "alias.") && !strcmp(k+6, alias_key)) { + if (!v) + return config_error_nonbool(k); + alias_val = strdup(v); + return 0; + } + return 0; +} + +char *alias_lookup(const char *alias) +{ + alias_key = alias; + alias_val = NULL; + perf_config(alias_lookup_cb, NULL); + return alias_val; +} + +int split_cmdline(char *cmdline, const char ***argv) +{ + int src, dst, count = 0, size = 16; + char quoted = 0; + + *argv = malloc(sizeof(char*) * size); + + /* split alias_string */ + (*argv)[count++] = cmdline; + for (src = dst = 0; cmdline[src];) { + char c = cmdline[src]; + if (!quoted && isspace(c)) { + cmdline[dst++] = 0; + while (cmdline[++src] + && isspace(cmdline[src])) + ; /* skip */ + if (count >= size) { + size += 16; + *argv = realloc(*argv, sizeof(char*) * size); + } + (*argv)[count++] = cmdline + dst; + } else if (!quoted && (c == '\'' || c == '"')) { + quoted = c; + src++; + } else if (c == quoted) { + quoted = 0; + src++; + } else { + if (c == '\\' && quoted != '\'') { + src++; + c = cmdline[src]; + if (!c) { + free(*argv); + *argv = NULL; + return error("cmdline ends with \\"); + } + } + cmdline[dst++] = c; + src++; + } + } + + cmdline[dst] = 0; + + if (quoted) { + free(*argv); + *argv = NULL; + return error("unclosed quote"); + } + + return count; +} + diff --git a/trunk/tools/perf/util/cache.h b/trunk/tools/perf/util/cache.h new file mode 100644 index 000000000000..393d6146d13b --- /dev/null +++ b/trunk/tools/perf/util/cache.h @@ -0,0 +1,119 @@ +#ifndef CACHE_H +#define CACHE_H + +#include "util.h" +#include "strbuf.h" + +#define PERF_DIR_ENVIRONMENT "PERF_DIR" +#define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE" +#define DEFAULT_PERF_DIR_ENVIRONMENT ".perf" +#define DB_ENVIRONMENT "PERF_OBJECT_DIRECTORY" +#define INDEX_ENVIRONMENT "PERF_INDEX_FILE" +#define GRAFT_ENVIRONMENT "PERF_GRAFT_FILE" +#define TEMPLATE_DIR_ENVIRONMENT "PERF_TEMPLATE_DIR" +#define CONFIG_ENVIRONMENT "PERF_CONFIG" +#define EXEC_PATH_ENVIRONMENT "PERF_EXEC_PATH" +#define CEILING_DIRECTORIES_ENVIRONMENT "PERF_CEILING_DIRECTORIES" +#define PERFATTRIBUTES_FILE ".perfattributes" +#define INFOATTRIBUTES_FILE "info/attributes" +#define ATTRIBUTE_MACRO_PREFIX "[attr]" + +typedef int (*config_fn_t)(const char *, const char *, void *); +extern int perf_default_config(const char *, const char *, void *); +extern int perf_config_from_file(config_fn_t fn, const char *, void *); +extern int perf_config(config_fn_t fn, void *); +extern int perf_parse_ulong(const char *, unsigned long *); +extern int perf_config_int(const char *, const char *); +extern unsigned long perf_config_ulong(const char *, const char *); +extern int perf_config_bool_or_int(const char *, const char *, int *); +extern int perf_config_bool(const char *, const char *); +extern int perf_config_string(const char **, const char *, const char *); +extern int perf_config_set(const char *, const char *); +extern int perf_config_set_multivar(const char *, const char *, const char *, int); +extern int perf_config_rename_section(const char *, const char *); +extern const char *perf_etc_perfconfig(void); +extern int check_repository_format_version(const char *var, const char *value, void *cb); +extern int perf_config_system(void); +extern int perf_config_global(void); +extern int config_error_nonbool(const char *); +extern const char *config_exclusive_filename; + +#define MAX_PERFNAME (1000) +extern char perf_default_email[MAX_PERFNAME]; +extern char perf_default_name[MAX_PERFNAME]; +extern int user_ident_explicitly_given; + +extern const char *perf_log_output_encoding; +extern const char *perf_mailmap_file; + +/* IO helper functions */ +extern void maybe_flush_or_die(FILE *, const char *); +extern int copy_fd(int ifd, int ofd); +extern int copy_file(const char *dst, const char *src, int mode); +extern ssize_t read_in_full(int fd, void *buf, size_t count); +extern ssize_t write_in_full(int fd, const void *buf, size_t count); +extern void write_or_die(int fd, const void *buf, size_t count); +extern int write_or_whine(int fd, const void *buf, size_t count, const char *msg); +extern int write_or_whine_pipe(int fd, const void *buf, size_t count, const char *msg); +extern void fsync_or_die(int fd, const char *); + +/* pager.c */ +extern void setup_pager(void); +extern const char *pager_program; +extern int pager_in_use(void); +extern int pager_use_color; + +extern const char *editor_program; +extern const char *excludes_file; + +char *alias_lookup(const char *alias); +int split_cmdline(char *cmdline, const char ***argv); + +#define alloc_nr(x) (((x)+16)*3/2) + +/* + * Realloc the buffer pointed at by variable 'x' so that it can hold + * at least 'nr' entries; the number of entries currently allocated + * is 'alloc', using the standard growing factor alloc_nr() macro. + * + * DO NOT USE any expression with side-effect for 'x' or 'alloc'. + */ +#define ALLOC_GROW(x, nr, alloc) \ + do { \ + if ((nr) > alloc) { \ + if (alloc_nr(alloc) < (nr)) \ + alloc = (nr); \ + else \ + alloc = alloc_nr(alloc); \ + x = xrealloc((x), alloc * sizeof(*(x))); \ + } \ + } while(0) + + +static inline int is_absolute_path(const char *path) +{ + return path[0] == '/'; +} + +const char *make_absolute_path(const char *path); +const char *make_nonrelative_path(const char *path); +const char *make_relative_path(const char *abs, const char *base); +int normalize_path_copy(char *dst, const char *src); +int longest_ancestor_length(const char *path, const char *prefix_list); +char *strip_path_suffix(const char *path, const char *suffix); + +extern char *mkpath(const char *fmt, ...) __attribute__((format (printf, 1, 2))); +extern char *perf_path(const char *fmt, ...) __attribute__((format (printf, 1, 2))); +/* perf_mkstemp() - create tmp file honoring TMPDIR variable */ +extern int perf_mkstemp(char *path, size_t len, const char *template); + +extern char *mksnpath(char *buf, size_t n, const char *fmt, ...) + __attribute__((format (printf, 3, 4))); +extern char *perf_snpath(char *buf, size_t n, const char *fmt, ...) + __attribute__((format (printf, 3, 4))); +extern char *perf_pathdup(const char *fmt, ...) + __attribute__((format (printf, 1, 2))); + +extern size_t strlcpy(char *dest, const char *src, size_t size); + +#endif /* CACHE_H */ diff --git a/trunk/tools/perf/util/color.c b/trunk/tools/perf/util/color.c new file mode 100644 index 000000000000..9a8c20ccc53e --- /dev/null +++ b/trunk/tools/perf/util/color.c @@ -0,0 +1,241 @@ +#include "cache.h" +#include "color.h" + +int perf_use_color_default = -1; + +static int parse_color(const char *name, int len) +{ + static const char * const color_names[] = { + "normal", "black", "red", "green", "yellow", + "blue", "magenta", "cyan", "white" + }; + char *end; + int i; + for (i = 0; i < ARRAY_SIZE(color_names); i++) { + const char *str = color_names[i]; + if (!strncasecmp(name, str, len) && !str[len]) + return i - 1; + } + i = strtol(name, &end, 10); + if (end - name == len && i >= -1 && i <= 255) + return i; + return -2; +} + +static int parse_attr(const char *name, int len) +{ + static const int attr_values[] = { 1, 2, 4, 5, 7 }; + static const char * const attr_names[] = { + "bold", "dim", "ul", "blink", "reverse" + }; + int i; + for (i = 0; i < ARRAY_SIZE(attr_names); i++) { + const char *str = attr_names[i]; + if (!strncasecmp(name, str, len) && !str[len]) + return attr_values[i]; + } + return -1; +} + +void color_parse(const char *value, const char *var, char *dst) +{ + color_parse_mem(value, strlen(value), var, dst); +} + +void color_parse_mem(const char *value, int value_len, const char *var, + char *dst) +{ + const char *ptr = value; + int len = value_len; + int attr = -1; + int fg = -2; + int bg = -2; + + if (!strncasecmp(value, "reset", len)) { + strcpy(dst, PERF_COLOR_RESET); + return; + } + + /* [fg [bg]] [attr] */ + while (len > 0) { + const char *word = ptr; + int val, wordlen = 0; + + while (len > 0 && !isspace(word[wordlen])) { + wordlen++; + len--; + } + + ptr = word + wordlen; + while (len > 0 && isspace(*ptr)) { + ptr++; + len--; + } + + val = parse_color(word, wordlen); + if (val >= -1) { + if (fg == -2) { + fg = val; + continue; + } + if (bg == -2) { + bg = val; + continue; + } + goto bad; + } + val = parse_attr(word, wordlen); + if (val < 0 || attr != -1) + goto bad; + attr = val; + } + + if (attr >= 0 || fg >= 0 || bg >= 0) { + int sep = 0; + + *dst++ = '\033'; + *dst++ = '['; + if (attr >= 0) { + *dst++ = '0' + attr; + sep++; + } + if (fg >= 0) { + if (sep++) + *dst++ = ';'; + if (fg < 8) { + *dst++ = '3'; + *dst++ = '0' + fg; + } else { + dst += sprintf(dst, "38;5;%d", fg); + } + } + if (bg >= 0) { + if (sep++) + *dst++ = ';'; + if (bg < 8) { + *dst++ = '4'; + *dst++ = '0' + bg; + } else { + dst += sprintf(dst, "48;5;%d", bg); + } + } + *dst++ = 'm'; + } + *dst = 0; + return; +bad: + die("bad color value '%.*s' for variable '%s'", value_len, value, var); +} + +int perf_config_colorbool(const char *var, const char *value, int stdout_is_tty) +{ + if (value) { + if (!strcasecmp(value, "never")) + return 0; + if (!strcasecmp(value, "always")) + return 1; + if (!strcasecmp(value, "auto")) + goto auto_color; + } + + /* Missing or explicit false to turn off colorization */ + if (!perf_config_bool(var, value)) + return 0; + + /* any normal truth value defaults to 'auto' */ + auto_color: + if (stdout_is_tty < 0) + stdout_is_tty = isatty(1); + if (stdout_is_tty || (pager_in_use() && pager_use_color)) { + char *term = getenv("TERM"); + if (term && strcmp(term, "dumb")) + return 1; + } + return 0; +} + +int perf_color_default_config(const char *var, const char *value, void *cb) +{ + if (!strcmp(var, "color.ui")) { + perf_use_color_default = perf_config_colorbool(var, value, -1); + return 0; + } + + return perf_default_config(var, value, cb); +} + +static int color_vfprintf(FILE *fp, const char *color, const char *fmt, + va_list args, const char *trail) +{ + int r = 0; + + /* + * Auto-detect: + */ + if (perf_use_color_default < 0) { + if (isatty(1) || pager_in_use()) + perf_use_color_default = 1; + else + perf_use_color_default = 0; + } + + if (perf_use_color_default && *color) + r += fprintf(fp, "%s", color); + r += vfprintf(fp, fmt, args); + if (perf_use_color_default && *color) + r += fprintf(fp, "%s", PERF_COLOR_RESET); + if (trail) + r += fprintf(fp, "%s", trail); + return r; +} + + + +int color_fprintf(FILE *fp, const char *color, const char *fmt, ...) +{ + va_list args; + int r; + + va_start(args, fmt); + r = color_vfprintf(fp, color, fmt, args, NULL); + va_end(args); + return r; +} + +int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...) +{ + va_list args; + int r; + va_start(args, fmt); + r = color_vfprintf(fp, color, fmt, args, "\n"); + va_end(args); + return r; +} + +/* + * This function splits the buffer by newlines and colors the lines individually. + * + * Returns 0 on success. + */ +int color_fwrite_lines(FILE *fp, const char *color, + size_t count, const char *buf) +{ + if (!*color) + return fwrite(buf, count, 1, fp) != 1; + while (count) { + char *p = memchr(buf, '\n', count); + if (p != buf && (fputs(color, fp) < 0 || + fwrite(buf, p ? p - buf : count, 1, fp) != 1 || + fputs(PERF_COLOR_RESET, fp) < 0)) + return -1; + if (!p) + return 0; + if (fputc('\n', fp) < 0) + return -1; + count -= p + 1 - buf; + buf = p + 1; + } + return 0; +} + + diff --git a/trunk/tools/perf/util/color.h b/trunk/tools/perf/util/color.h new file mode 100644 index 000000000000..5abfd379582b --- /dev/null +++ b/trunk/tools/perf/util/color.h @@ -0,0 +1,36 @@ +#ifndef COLOR_H +#define COLOR_H + +/* "\033[1;38;5;2xx;48;5;2xxm\0" is 23 bytes */ +#define COLOR_MAXLEN 24 + +#define PERF_COLOR_NORMAL "" +#define PERF_COLOR_RESET "\033[m" +#define PERF_COLOR_BOLD "\033[1m" +#define PERF_COLOR_RED "\033[31m" +#define PERF_COLOR_GREEN "\033[32m" +#define PERF_COLOR_YELLOW "\033[33m" +#define PERF_COLOR_BLUE "\033[34m" +#define PERF_COLOR_MAGENTA "\033[35m" +#define PERF_COLOR_CYAN "\033[36m" +#define PERF_COLOR_BG_RED "\033[41m" + +/* + * This variable stores the value of color.ui + */ +extern int perf_use_color_default; + + +/* + * Use this instead of perf_default_config if you need the value of color.ui. + */ +int perf_color_default_config(const char *var, const char *value, void *cb); + +int perf_config_colorbool(const char *var, const char *value, int stdout_is_tty); +void color_parse(const char *value, const char *var, char *dst); +void color_parse_mem(const char *value, int len, const char *var, char *dst); +int color_fprintf(FILE *fp, const char *color, const char *fmt, ...); +int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...); +int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf); + +#endif /* COLOR_H */ diff --git a/trunk/tools/perf/util/config.c b/trunk/tools/perf/util/config.c new file mode 100644 index 000000000000..3dd13faa6a27 --- /dev/null +++ b/trunk/tools/perf/util/config.c @@ -0,0 +1,873 @@ +/* + * GIT - The information manager from hell + * + * Copyright (C) Linus Torvalds, 2005 + * Copyright (C) Johannes Schindelin, 2005 + * + */ +#include "util.h" +#include "cache.h" +#include "exec_cmd.h" + +#define MAXNAME (256) + +static FILE *config_file; +static const char *config_file_name; +static int config_linenr; +static int config_file_eof; + +const char *config_exclusive_filename = NULL; + +static int get_next_char(void) +{ + int c; + FILE *f; + + c = '\n'; + if ((f = config_file) != NULL) { + c = fgetc(f); + if (c == '\r') { + /* DOS like systems */ + c = fgetc(f); + if (c != '\n') { + ungetc(c, f); + c = '\r'; + } + } + if (c == '\n') + config_linenr++; + if (c == EOF) { + config_file_eof = 1; + c = '\n'; + } + } + return c; +} + +static char *parse_value(void) +{ + static char value[1024]; + int quote = 0, comment = 0, len = 0, space = 0; + + for (;;) { + int c = get_next_char(); + if (len >= sizeof(value) - 1) + return NULL; + if (c == '\n') { + if (quote) + return NULL; + value[len] = 0; + return value; + } + if (comment) + continue; + if (isspace(c) && !quote) { + space = 1; + continue; + } + if (!quote) { + if (c == ';' || c == '#') { + comment = 1; + continue; + } + } + if (space) { + if (len) + value[len++] = ' '; + space = 0; + } + if (c == '\\') { + c = get_next_char(); + switch (c) { + case '\n': + continue; + case 't': + c = '\t'; + break; + case 'b': + c = '\b'; + break; + case 'n': + c = '\n'; + break; + /* Some characters escape as themselves */ + case '\\': case '"': + break; + /* Reject unknown escape sequences */ + default: + return NULL; + } + value[len++] = c; + continue; + } + if (c == '"') { + quote = 1-quote; + continue; + } + value[len++] = c; + } +} + +static inline int iskeychar(int c) +{ + return isalnum(c) || c == '-'; +} + +static int get_value(config_fn_t fn, void *data, char *name, unsigned int len) +{ + int c; + char *value; + + /* Get the full name */ + for (;;) { + c = get_next_char(); + if (config_file_eof) + break; + if (!iskeychar(c)) + break; + name[len++] = tolower(c); + if (len >= MAXNAME) + return -1; + } + name[len] = 0; + while (c == ' ' || c == '\t') + c = get_next_char(); + + value = NULL; + if (c != '\n') { + if (c != '=') + return -1; + value = parse_value(); + if (!value) + return -1; + } + return fn(name, value, data); +} + +static int get_extended_base_var(char *name, int baselen, int c) +{ + do { + if (c == '\n') + return -1; + c = get_next_char(); + } while (isspace(c)); + + /* We require the format to be '[base "extension"]' */ + if (c != '"') + return -1; + name[baselen++] = '.'; + + for (;;) { + int c = get_next_char(); + if (c == '\n') + return -1; + if (c == '"') + break; + if (c == '\\') { + c = get_next_char(); + if (c == '\n') + return -1; + } + name[baselen++] = c; + if (baselen > MAXNAME / 2) + return -1; + } + + /* Final ']' */ + if (get_next_char() != ']') + return -1; + return baselen; +} + +static int get_base_var(char *name) +{ + int baselen = 0; + + for (;;) { + int c = get_next_char(); + if (config_file_eof) + return -1; + if (c == ']') + return baselen; + if (isspace(c)) + return get_extended_base_var(name, baselen, c); + if (!iskeychar(c) && c != '.') + return -1; + if (baselen > MAXNAME / 2) + return -1; + name[baselen++] = tolower(c); + } +} + +static int perf_parse_file(config_fn_t fn, void *data) +{ + int comment = 0; + int baselen = 0; + static char var[MAXNAME]; + + /* U+FEFF Byte Order Mark in UTF8 */ + static const unsigned char *utf8_bom = (unsigned char *) "\xef\xbb\xbf"; + const unsigned char *bomptr = utf8_bom; + + for (;;) { + int c = get_next_char(); + if (bomptr && *bomptr) { + /* We are at the file beginning; skip UTF8-encoded BOM + * if present. Sane editors won't put this in on their + * own, but e.g. Windows Notepad will do it happily. */ + if ((unsigned char) c == *bomptr) { + bomptr++; + continue; + } else { + /* Do not tolerate partial BOM. */ + if (bomptr != utf8_bom) + break; + /* No BOM at file beginning. Cool. */ + bomptr = NULL; + } + } + if (c == '\n') { + if (config_file_eof) + return 0; + comment = 0; + continue; + } + if (comment || isspace(c)) + continue; + if (c == '#' || c == ';') { + comment = 1; + continue; + } + if (c == '[') { + baselen = get_base_var(var); + if (baselen <= 0) + break; + var[baselen++] = '.'; + var[baselen] = 0; + continue; + } + if (!isalpha(c)) + break; + var[baselen] = tolower(c); + if (get_value(fn, data, var, baselen+1) < 0) + break; + } + die("bad config file line %d in %s", config_linenr, config_file_name); +} + +static int parse_unit_factor(const char *end, unsigned long *val) +{ + if (!*end) + return 1; + else if (!strcasecmp(end, "k")) { + *val *= 1024; + return 1; + } + else if (!strcasecmp(end, "m")) { + *val *= 1024 * 1024; + return 1; + } + else if (!strcasecmp(end, "g")) { + *val *= 1024 * 1024 * 1024; + return 1; + } + return 0; +} + +static int perf_parse_long(const char *value, long *ret) +{ + if (value && *value) { + char *end; + long val = strtol(value, &end, 0); + unsigned long factor = 1; + if (!parse_unit_factor(end, &factor)) + return 0; + *ret = val * factor; + return 1; + } + return 0; +} + +int perf_parse_ulong(const char *value, unsigned long *ret) +{ + if (value && *value) { + char *end; + unsigned long val = strtoul(value, &end, 0); + if (!parse_unit_factor(end, &val)) + return 0; + *ret = val; + return 1; + } + return 0; +} + +static void die_bad_config(const char *name) +{ + if (config_file_name) + die("bad config value for '%s' in %s", name, config_file_name); + die("bad config value for '%s'", name); +} + +int perf_config_int(const char *name, const char *value) +{ + long ret = 0; + if (!perf_parse_long(value, &ret)) + die_bad_config(name); + return ret; +} + +unsigned long perf_config_ulong(const char *name, const char *value) +{ + unsigned long ret; + if (!perf_parse_ulong(value, &ret)) + die_bad_config(name); + return ret; +} + +int perf_config_bool_or_int(const char *name, const char *value, int *is_bool) +{ + *is_bool = 1; + if (!value) + return 1; + if (!*value) + return 0; + if (!strcasecmp(value, "true") || !strcasecmp(value, "yes") || !strcasecmp(value, "on")) + return 1; + if (!strcasecmp(value, "false") || !strcasecmp(value, "no") || !strcasecmp(value, "off")) + return 0; + *is_bool = 0; + return perf_config_int(name, value); +} + +int perf_config_bool(const char *name, const char *value) +{ + int discard; + return !!perf_config_bool_or_int(name, value, &discard); +} + +int perf_config_string(const char **dest, const char *var, const char *value) +{ + if (!value) + return config_error_nonbool(var); + *dest = strdup(value); + return 0; +} + +static int perf_default_core_config(const char *var, const char *value) +{ + /* Add other config variables here and to Documentation/config.txt. */ + return 0; +} + +int perf_default_config(const char *var, const char *value, void *dummy) +{ + if (!prefixcmp(var, "core.")) + return perf_default_core_config(var, value); + + /* Add other config variables here and to Documentation/config.txt. */ + return 0; +} + +int perf_config_from_file(config_fn_t fn, const char *filename, void *data) +{ + int ret; + FILE *f = fopen(filename, "r"); + + ret = -1; + if (f) { + config_file = f; + config_file_name = filename; + config_linenr = 1; + config_file_eof = 0; + ret = perf_parse_file(fn, data); + fclose(f); + config_file_name = NULL; + } + return ret; +} + +const char *perf_etc_perfconfig(void) +{ + static const char *system_wide; + if (!system_wide) + system_wide = system_path(ETC_PERFCONFIG); + return system_wide; +} + +static int perf_env_bool(const char *k, int def) +{ + const char *v = getenv(k); + return v ? perf_config_bool(k, v) : def; +} + +int perf_config_system(void) +{ + return !perf_env_bool("PERF_CONFIG_NOSYSTEM", 0); +} + +int perf_config_global(void) +{ + return !perf_env_bool("PERF_CONFIG_NOGLOBAL", 0); +} + +int perf_config(config_fn_t fn, void *data) +{ + int ret = 0, found = 0; + char *repo_config = NULL; + const char *home = NULL; + + /* Setting $PERF_CONFIG makes perf read _only_ the given config file. */ + if (config_exclusive_filename) + return perf_config_from_file(fn, config_exclusive_filename, data); + if (perf_config_system() && !access(perf_etc_perfconfig(), R_OK)) { + ret += perf_config_from_file(fn, perf_etc_perfconfig(), + data); + found += 1; + } + + home = getenv("HOME"); + if (perf_config_global() && home) { + char *user_config = strdup(mkpath("%s/.perfconfig", home)); + if (!access(user_config, R_OK)) { + ret += perf_config_from_file(fn, user_config, data); + found += 1; + } + free(user_config); + } + + repo_config = perf_pathdup("config"); + if (!access(repo_config, R_OK)) { + ret += perf_config_from_file(fn, repo_config, data); + found += 1; + } + free(repo_config); + if (found == 0) + return -1; + return ret; +} + +/* + * Find all the stuff for perf_config_set() below. + */ + +#define MAX_MATCHES 512 + +static struct { + int baselen; + char* key; + int do_not_match; + regex_t* value_regex; + int multi_replace; + size_t offset[MAX_MATCHES]; + enum { START, SECTION_SEEN, SECTION_END_SEEN, KEY_SEEN } state; + int seen; +} store; + +static int matches(const char* key, const char* value) +{ + return !strcmp(key, store.key) && + (store.value_regex == NULL || + (store.do_not_match ^ + !regexec(store.value_regex, value, 0, NULL, 0))); +} + +static int store_aux(const char* key, const char* value, void *cb) +{ + const char *ep; + size_t section_len; + + switch (store.state) { + case KEY_SEEN: + if (matches(key, value)) { + if (store.seen == 1 && store.multi_replace == 0) { + warning("%s has multiple values", key); + } else if (store.seen >= MAX_MATCHES) { + error("too many matches for %s", key); + return 1; + } + + store.offset[store.seen] = ftell(config_file); + store.seen++; + } + break; + case SECTION_SEEN: + /* + * What we are looking for is in store.key (both + * section and var), and its section part is baselen + * long. We found key (again, both section and var). + * We would want to know if this key is in the same + * section as what we are looking for. We already + * know we are in the same section as what should + * hold store.key. + */ + ep = strrchr(key, '.'); + section_len = ep - key; + + if ((section_len != store.baselen) || + memcmp(key, store.key, section_len+1)) { + store.state = SECTION_END_SEEN; + break; + } + + /* + * Do not increment matches: this is no match, but we + * just made sure we are in the desired section. + */ + store.offset[store.seen] = ftell(config_file); + /* fallthru */ + case SECTION_END_SEEN: + case START: + if (matches(key, value)) { + store.offset[store.seen] = ftell(config_file); + store.state = KEY_SEEN; + store.seen++; + } else { + if (strrchr(key, '.') - key == store.baselen && + !strncmp(key, store.key, store.baselen)) { + store.state = SECTION_SEEN; + store.offset[store.seen] = ftell(config_file); + } + } + } + return 0; +} + +static int store_write_section(int fd, const char* key) +{ + const char *dot; + int i, success; + struct strbuf sb = STRBUF_INIT; + + dot = memchr(key, '.', store.baselen); + if (dot) { + strbuf_addf(&sb, "[%.*s \"", (int)(dot - key), key); + for (i = dot - key + 1; i < store.baselen; i++) { + if (key[i] == '"' || key[i] == '\\') + strbuf_addch(&sb, '\\'); + strbuf_addch(&sb, key[i]); + } + strbuf_addstr(&sb, "\"]\n"); + } else { + strbuf_addf(&sb, "[%.*s]\n", store.baselen, key); + } + + success = write_in_full(fd, sb.buf, sb.len) == sb.len; + strbuf_release(&sb); + + return success; +} + +static int store_write_pair(int fd, const char* key, const char* value) +{ + int i, success; + int length = strlen(key + store.baselen + 1); + const char *quote = ""; + struct strbuf sb = STRBUF_INIT; + + /* + * Check to see if the value needs to be surrounded with a dq pair. + * Note that problematic characters are always backslash-quoted; this + * check is about not losing leading or trailing SP and strings that + * follow beginning-of-comment characters (i.e. ';' and '#') by the + * configuration parser. + */ + if (value[0] == ' ') + quote = "\""; + for (i = 0; value[i]; i++) + if (value[i] == ';' || value[i] == '#') + quote = "\""; + if (i && value[i - 1] == ' ') + quote = "\""; + + strbuf_addf(&sb, "\t%.*s = %s", + length, key + store.baselen + 1, quote); + + for (i = 0; value[i]; i++) + switch (value[i]) { + case '\n': + strbuf_addstr(&sb, "\\n"); + break; + case '\t': + strbuf_addstr(&sb, "\\t"); + break; + case '"': + case '\\': + strbuf_addch(&sb, '\\'); + default: + strbuf_addch(&sb, value[i]); + break; + } + strbuf_addf(&sb, "%s\n", quote); + + success = write_in_full(fd, sb.buf, sb.len) == sb.len; + strbuf_release(&sb); + + return success; +} + +static ssize_t find_beginning_of_line(const char* contents, size_t size, + size_t offset_, int* found_bracket) +{ + size_t equal_offset = size, bracket_offset = size; + ssize_t offset; + +contline: + for (offset = offset_-2; offset > 0 + && contents[offset] != '\n'; offset--) + switch (contents[offset]) { + case '=': equal_offset = offset; break; + case ']': bracket_offset = offset; break; + } + if (offset > 0 && contents[offset-1] == '\\') { + offset_ = offset; + goto contline; + } + if (bracket_offset < equal_offset) { + *found_bracket = 1; + offset = bracket_offset+1; + } else + offset++; + + return offset; +} + +int perf_config_set(const char* key, const char* value) +{ + return perf_config_set_multivar(key, value, NULL, 0); +} + +/* + * If value==NULL, unset in (remove from) config, + * if value_regex!=NULL, disregard key/value pairs where value does not match. + * if multi_replace==0, nothing, or only one matching key/value is replaced, + * else all matching key/values (regardless how many) are removed, + * before the new pair is written. + * + * Returns 0 on success. + * + * This function does this: + * + * - it locks the config file by creating ".perf/config.lock" + * + * - it then parses the config using store_aux() as validator to find + * the position on the key/value pair to replace. If it is to be unset, + * it must be found exactly once. + * + * - the config file is mmap()ed and the part before the match (if any) is + * written to the lock file, then the changed part and the rest. + * + * - the config file is removed and the lock file rename()d to it. + * + */ +int perf_config_set_multivar(const char* key, const char* value, + const char* value_regex, int multi_replace) +{ + int i, dot; + int fd = -1, in_fd; + int ret = 0; + char* config_filename; + const char* last_dot = strrchr(key, '.'); + + if (config_exclusive_filename) + config_filename = strdup(config_exclusive_filename); + else + config_filename = perf_pathdup("config"); + + /* + * Since "key" actually contains the section name and the real + * key name separated by a dot, we have to know where the dot is. + */ + + if (last_dot == NULL) { + error("key does not contain a section: %s", key); + ret = 2; + goto out_free; + } + store.baselen = last_dot - key; + + store.multi_replace = multi_replace; + + /* + * Validate the key and while at it, lower case it for matching. + */ + store.key = malloc(strlen(key) + 1); + dot = 0; + for (i = 0; key[i]; i++) { + unsigned char c = key[i]; + if (c == '.') + dot = 1; + /* Leave the extended basename untouched.. */ + if (!dot || i > store.baselen) { + if (!iskeychar(c) || (i == store.baselen+1 && !isalpha(c))) { + error("invalid key: %s", key); + free(store.key); + ret = 1; + goto out_free; + } + c = tolower(c); + } else if (c == '\n') { + error("invalid key (newline): %s", key); + free(store.key); + ret = 1; + goto out_free; + } + store.key[i] = c; + } + store.key[i] = 0; + + /* + * If .perf/config does not exist yet, write a minimal version. + */ + in_fd = open(config_filename, O_RDONLY); + if ( in_fd < 0 ) { + free(store.key); + + if ( ENOENT != errno ) { + error("opening %s: %s", config_filename, + strerror(errno)); + ret = 3; /* same as "invalid config file" */ + goto out_free; + } + /* if nothing to unset, error out */ + if (value == NULL) { + ret = 5; + goto out_free; + } + + store.key = (char*)key; + if (!store_write_section(fd, key) || + !store_write_pair(fd, key, value)) + goto write_err_out; + } else { + struct stat st; + char* contents; + size_t contents_sz, copy_begin, copy_end; + int i, new_line = 0; + + if (value_regex == NULL) + store.value_regex = NULL; + else { + if (value_regex[0] == '!') { + store.do_not_match = 1; + value_regex++; + } else + store.do_not_match = 0; + + store.value_regex = (regex_t*)malloc(sizeof(regex_t)); + if (regcomp(store.value_regex, value_regex, + REG_EXTENDED)) { + error("invalid pattern: %s", value_regex); + free(store.value_regex); + ret = 6; + goto out_free; + } + } + + store.offset[0] = 0; + store.state = START; + store.seen = 0; + + /* + * After this, store.offset will contain the *end* offset + * of the last match, or remain at 0 if no match was found. + * As a side effect, we make sure to transform only a valid + * existing config file. + */ + if (perf_config_from_file(store_aux, config_filename, NULL)) { + error("invalid config file %s", config_filename); + free(store.key); + if (store.value_regex != NULL) { + regfree(store.value_regex); + free(store.value_regex); + } + ret = 3; + goto out_free; + } + + free(store.key); + if (store.value_regex != NULL) { + regfree(store.value_regex); + free(store.value_regex); + } + + /* if nothing to unset, or too many matches, error out */ + if ((store.seen == 0 && value == NULL) || + (store.seen > 1 && multi_replace == 0)) { + ret = 5; + goto out_free; + } + + fstat(in_fd, &st); + contents_sz = xsize_t(st.st_size); + contents = mmap(NULL, contents_sz, PROT_READ, + MAP_PRIVATE, in_fd, 0); + close(in_fd); + + if (store.seen == 0) + store.seen = 1; + + for (i = 0, copy_begin = 0; i < store.seen; i++) { + if (store.offset[i] == 0) { + store.offset[i] = copy_end = contents_sz; + } else if (store.state != KEY_SEEN) { + copy_end = store.offset[i]; + } else + copy_end = find_beginning_of_line( + contents, contents_sz, + store.offset[i]-2, &new_line); + + if (copy_end > 0 && contents[copy_end-1] != '\n') + new_line = 1; + + /* write the first part of the config */ + if (copy_end > copy_begin) { + if (write_in_full(fd, contents + copy_begin, + copy_end - copy_begin) < + copy_end - copy_begin) + goto write_err_out; + if (new_line && + write_in_full(fd, "\n", 1) != 1) + goto write_err_out; + } + copy_begin = store.offset[i]; + } + + /* write the pair (value == NULL means unset) */ + if (value != NULL) { + if (store.state == START) { + if (!store_write_section(fd, key)) + goto write_err_out; + } + if (!store_write_pair(fd, key, value)) + goto write_err_out; + } + + /* write the rest of the config */ + if (copy_begin < contents_sz) + if (write_in_full(fd, contents + copy_begin, + contents_sz - copy_begin) < + contents_sz - copy_begin) + goto write_err_out; + + munmap(contents, contents_sz); + } + + ret = 0; + +out_free: + free(config_filename); + return ret; + +write_err_out: + goto out_free; + +} + +/* + * Call this to report error for your variable that should not + * get a boolean value (i.e. "[my] var" means "true"). + */ +int config_error_nonbool(const char *var) +{ + return error("Missing value for '%s'", var); +} diff --git a/trunk/tools/perf/util/ctype.c b/trunk/tools/perf/util/ctype.c new file mode 100644 index 000000000000..b90ec004f29c --- /dev/null +++ b/trunk/tools/perf/util/ctype.c @@ -0,0 +1,26 @@ +/* + * Sane locale-independent, ASCII ctype. + * + * No surprises, and works with signed and unsigned chars. + */ +#include "cache.h" + +enum { + S = GIT_SPACE, + A = GIT_ALPHA, + D = GIT_DIGIT, + G = GIT_GLOB_SPECIAL, /* *, ?, [, \\ */ + R = GIT_REGEX_SPECIAL, /* $, (, ), +, ., ^, {, | * */ +}; + +unsigned char sane_ctype[256] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, S, S, 0, 0, S, 0, 0, /* 0.. 15 */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 16.. 31 */ + S, 0, 0, 0, R, 0, 0, 0, R, R, G, R, 0, 0, R, 0, /* 32.. 47 */ + D, D, D, D, D, D, D, D, D, D, 0, 0, 0, 0, 0, G, /* 48.. 63 */ + 0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, /* 64.. 79 */ + A, A, A, A, A, A, A, A, A, A, A, G, G, 0, R, 0, /* 80.. 95 */ + 0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, /* 96..111 */ + A, A, A, A, A, A, A, A, A, A, A, R, R, 0, 0, 0, /* 112..127 */ + /* Nothing in the 128.. range */ +}; diff --git a/trunk/tools/perf/util/environment.c b/trunk/tools/perf/util/environment.c new file mode 100644 index 000000000000..275b0ee345f5 --- /dev/null +++ b/trunk/tools/perf/util/environment.c @@ -0,0 +1,9 @@ +/* + * We put all the perf config variables in this same object + * file, so that programs can link against the config parser + * without having to link against all the rest of perf. + */ +#include "cache.h" + +const char *pager_program; +int pager_use_color = 1; diff --git a/trunk/tools/perf/util/exec_cmd.c b/trunk/tools/perf/util/exec_cmd.c new file mode 100644 index 000000000000..d39292263153 --- /dev/null +++ b/trunk/tools/perf/util/exec_cmd.c @@ -0,0 +1,165 @@ +#include "cache.h" +#include "exec_cmd.h" +#include "quote.h" +#define MAX_ARGS 32 + +extern char **environ; +static const char *argv_exec_path; +static const char *argv0_path; + +const char *system_path(const char *path) +{ +#ifdef RUNTIME_PREFIX + static const char *prefix; +#else + static const char *prefix = PREFIX; +#endif + struct strbuf d = STRBUF_INIT; + + if (is_absolute_path(path)) + return path; + +#ifdef RUNTIME_PREFIX + assert(argv0_path); + assert(is_absolute_path(argv0_path)); + + if (!prefix && + !(prefix = strip_path_suffix(argv0_path, PERF_EXEC_PATH)) && + !(prefix = strip_path_suffix(argv0_path, BINDIR)) && + !(prefix = strip_path_suffix(argv0_path, "perf"))) { + prefix = PREFIX; + fprintf(stderr, "RUNTIME_PREFIX requested, " + "but prefix computation failed. " + "Using static fallback '%s'.\n", prefix); + } +#endif + + strbuf_addf(&d, "%s/%s", prefix, path); + path = strbuf_detach(&d, NULL); + return path; +} + +const char *perf_extract_argv0_path(const char *argv0) +{ + const char *slash; + + if (!argv0 || !*argv0) + return NULL; + slash = argv0 + strlen(argv0); + + while (argv0 <= slash && !is_dir_sep(*slash)) + slash--; + + if (slash >= argv0) { + argv0_path = strndup(argv0, slash - argv0); + return slash + 1; + } + + return argv0; +} + +void perf_set_argv_exec_path(const char *exec_path) +{ + argv_exec_path = exec_path; + /* + * Propagate this setting to external programs. + */ + setenv(EXEC_PATH_ENVIRONMENT, exec_path, 1); +} + + +/* Returns the highest-priority, location to look for perf programs. */ +const char *perf_exec_path(void) +{ + const char *env; + + if (argv_exec_path) + return argv_exec_path; + + env = getenv(EXEC_PATH_ENVIRONMENT); + if (env && *env) { + return env; + } + + return system_path(PERF_EXEC_PATH); +} + +static void add_path(struct strbuf *out, const char *path) +{ + if (path && *path) { + if (is_absolute_path(path)) + strbuf_addstr(out, path); + else + strbuf_addstr(out, make_nonrelative_path(path)); + + strbuf_addch(out, PATH_SEP); + } +} + +void setup_path(void) +{ + const char *old_path = getenv("PATH"); + struct strbuf new_path = STRBUF_INIT; + + add_path(&new_path, perf_exec_path()); + add_path(&new_path, argv0_path); + + if (old_path) + strbuf_addstr(&new_path, old_path); + else + strbuf_addstr(&new_path, "/usr/local/bin:/usr/bin:/bin"); + + setenv("PATH", new_path.buf, 1); + + strbuf_release(&new_path); +} + +const char **prepare_perf_cmd(const char **argv) +{ + int argc; + const char **nargv; + + for (argc = 0; argv[argc]; argc++) + ; /* just counting */ + nargv = malloc(sizeof(*nargv) * (argc + 2)); + + nargv[0] = "perf"; + for (argc = 0; argv[argc]; argc++) + nargv[argc + 1] = argv[argc]; + nargv[argc + 1] = NULL; + return nargv; +} + +int execv_perf_cmd(const char **argv) { + const char **nargv = prepare_perf_cmd(argv); + + /* execvp() can only ever return if it fails */ + execvp("perf", (char **)nargv); + + free(nargv); + return -1; +} + + +int execl_perf_cmd(const char *cmd,...) +{ + int argc; + const char *argv[MAX_ARGS + 1]; + const char *arg; + va_list param; + + va_start(param, cmd); + argv[0] = cmd; + argc = 1; + while (argc < MAX_ARGS) { + arg = argv[argc++] = va_arg(param, char *); + if (!arg) + break; + } + va_end(param); + if (MAX_ARGS <= argc) + return error("too many args to run %s", cmd); + + argv[argc] = NULL; + return execv_perf_cmd(argv); +} diff --git a/trunk/tools/perf/util/exec_cmd.h b/trunk/tools/perf/util/exec_cmd.h new file mode 100644 index 000000000000..effe25eb1545 --- /dev/null +++ b/trunk/tools/perf/util/exec_cmd.h @@ -0,0 +1,13 @@ +#ifndef PERF_EXEC_CMD_H +#define PERF_EXEC_CMD_H + +extern void perf_set_argv_exec_path(const char *exec_path); +extern const char *perf_extract_argv0_path(const char *path); +extern const char *perf_exec_path(void); +extern void setup_path(void); +extern const char **prepare_perf_cmd(const char **argv); +extern int execv_perf_cmd(const char **argv); /* NULL terminated */ +extern int execl_perf_cmd(const char *cmd, ...); +extern const char *system_path(const char *path); + +#endif /* PERF_EXEC_CMD_H */ diff --git a/trunk/tools/perf/util/generate-cmdlist.sh b/trunk/tools/perf/util/generate-cmdlist.sh new file mode 100755 index 000000000000..f06f6fd148f8 --- /dev/null +++ b/trunk/tools/perf/util/generate-cmdlist.sh @@ -0,0 +1,24 @@ +#!/bin/sh + +echo "/* Automatically generated by $0 */ +struct cmdname_help +{ + char name[16]; + char help[80]; +}; + +static struct cmdname_help common_cmds[] = {" + +sed -n -e 's/^perf-\([^ ]*\)[ ].* common.*/\1/p' command-list.txt | +sort | +while read cmd +do + sed -n ' + /^NAME/,/perf-'"$cmd"'/H + ${ + x + s/.*perf-'"$cmd"' - \(.*\)/ {"'"$cmd"'", "\1"},/ + p + }' "Documentation/perf-$cmd.txt" +done +echo "};" diff --git a/trunk/tools/perf/util/help.c b/trunk/tools/perf/util/help.c new file mode 100644 index 000000000000..6653f7dd1d78 --- /dev/null +++ b/trunk/tools/perf/util/help.c @@ -0,0 +1,367 @@ +#include "cache.h" +#include "../builtin.h" +#include "exec_cmd.h" +#include "levenshtein.h" +#include "help.h" + +/* most GUI terminals set COLUMNS (although some don't export it) */ +static int term_columns(void) +{ + char *col_string = getenv("COLUMNS"); + int n_cols; + + if (col_string && (n_cols = atoi(col_string)) > 0) + return n_cols; + +#ifdef TIOCGWINSZ + { + struct winsize ws; + if (!ioctl(1, TIOCGWINSZ, &ws)) { + if (ws.ws_col) + return ws.ws_col; + } + } +#endif + + return 80; +} + +void add_cmdname(struct cmdnames *cmds, const char *name, int len) +{ + struct cmdname *ent = malloc(sizeof(*ent) + len + 1); + + ent->len = len; + memcpy(ent->name, name, len); + ent->name[len] = 0; + + ALLOC_GROW(cmds->names, cmds->cnt + 1, cmds->alloc); + cmds->names[cmds->cnt++] = ent; +} + +static void clean_cmdnames(struct cmdnames *cmds) +{ + int i; + for (i = 0; i < cmds->cnt; ++i) + free(cmds->names[i]); + free(cmds->names); + cmds->cnt = 0; + cmds->alloc = 0; +} + +static int cmdname_compare(const void *a_, const void *b_) +{ + struct cmdname *a = *(struct cmdname **)a_; + struct cmdname *b = *(struct cmdname **)b_; + return strcmp(a->name, b->name); +} + +static void uniq(struct cmdnames *cmds) +{ + int i, j; + + if (!cmds->cnt) + return; + + for (i = j = 1; i < cmds->cnt; i++) + if (strcmp(cmds->names[i]->name, cmds->names[i-1]->name)) + cmds->names[j++] = cmds->names[i]; + + cmds->cnt = j; +} + +void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes) +{ + int ci, cj, ei; + int cmp; + + ci = cj = ei = 0; + while (ci < cmds->cnt && ei < excludes->cnt) { + cmp = strcmp(cmds->names[ci]->name, excludes->names[ei]->name); + if (cmp < 0) + cmds->names[cj++] = cmds->names[ci++]; + else if (cmp == 0) + ci++, ei++; + else if (cmp > 0) + ei++; + } + + while (ci < cmds->cnt) + cmds->names[cj++] = cmds->names[ci++]; + + cmds->cnt = cj; +} + +static void pretty_print_string_list(struct cmdnames *cmds, int longest) +{ + int cols = 1, rows; + int space = longest + 1; /* min 1 SP between words */ + int max_cols = term_columns() - 1; /* don't print *on* the edge */ + int i, j; + + if (space < max_cols) + cols = max_cols / space; + rows = (cmds->cnt + cols - 1) / cols; + + for (i = 0; i < rows; i++) { + printf(" "); + + for (j = 0; j < cols; j++) { + int n = j * rows + i; + int size = space; + if (n >= cmds->cnt) + break; + if (j == cols-1 || n + rows >= cmds->cnt) + size = 1; + printf("%-*s", size, cmds->names[n]->name); + } + putchar('\n'); + } +} + +static int is_executable(const char *name) +{ + struct stat st; + + if (stat(name, &st) || /* stat, not lstat */ + !S_ISREG(st.st_mode)) + return 0; + +#ifdef __MINGW32__ + /* cannot trust the executable bit, peek into the file instead */ + char buf[3] = { 0 }; + int n; + int fd = open(name, O_RDONLY); + st.st_mode &= ~S_IXUSR; + if (fd >= 0) { + n = read(fd, buf, 2); + if (n == 2) + /* DOS executables start with "MZ" */ + if (!strcmp(buf, "#!") || !strcmp(buf, "MZ")) + st.st_mode |= S_IXUSR; + close(fd); + } +#endif + return st.st_mode & S_IXUSR; +} + +static void list_commands_in_dir(struct cmdnames *cmds, + const char *path, + const char *prefix) +{ + int prefix_len; + DIR *dir = opendir(path); + struct dirent *de; + struct strbuf buf = STRBUF_INIT; + int len; + + if (!dir) + return; + if (!prefix) + prefix = "perf-"; + prefix_len = strlen(prefix); + + strbuf_addf(&buf, "%s/", path); + len = buf.len; + + while ((de = readdir(dir)) != NULL) { + int entlen; + + if (prefixcmp(de->d_name, prefix)) + continue; + + strbuf_setlen(&buf, len); + strbuf_addstr(&buf, de->d_name); + if (!is_executable(buf.buf)) + continue; + + entlen = strlen(de->d_name) - prefix_len; + if (has_extension(de->d_name, ".exe")) + entlen -= 4; + + add_cmdname(cmds, de->d_name + prefix_len, entlen); + } + closedir(dir); + strbuf_release(&buf); +} + +void load_command_list(const char *prefix, + struct cmdnames *main_cmds, + struct cmdnames *other_cmds) +{ + const char *env_path = getenv("PATH"); + const char *exec_path = perf_exec_path(); + + if (exec_path) { + list_commands_in_dir(main_cmds, exec_path, prefix); + qsort(main_cmds->names, main_cmds->cnt, + sizeof(*main_cmds->names), cmdname_compare); + uniq(main_cmds); + } + + if (env_path) { + char *paths, *path, *colon; + path = paths = strdup(env_path); + while (1) { + if ((colon = strchr(path, PATH_SEP))) + *colon = 0; + if (!exec_path || strcmp(path, exec_path)) + list_commands_in_dir(other_cmds, path, prefix); + + if (!colon) + break; + path = colon + 1; + } + free(paths); + + qsort(other_cmds->names, other_cmds->cnt, + sizeof(*other_cmds->names), cmdname_compare); + uniq(other_cmds); + } + exclude_cmds(other_cmds, main_cmds); +} + +void list_commands(const char *title, struct cmdnames *main_cmds, + struct cmdnames *other_cmds) +{ + int i, longest = 0; + + for (i = 0; i < main_cmds->cnt; i++) + if (longest < main_cmds->names[i]->len) + longest = main_cmds->names[i]->len; + for (i = 0; i < other_cmds->cnt; i++) + if (longest < other_cmds->names[i]->len) + longest = other_cmds->names[i]->len; + + if (main_cmds->cnt) { + const char *exec_path = perf_exec_path(); + printf("available %s in '%s'\n", title, exec_path); + printf("----------------"); + mput_char('-', strlen(title) + strlen(exec_path)); + putchar('\n'); + pretty_print_string_list(main_cmds, longest); + putchar('\n'); + } + + if (other_cmds->cnt) { + printf("%s available from elsewhere on your $PATH\n", title); + printf("---------------------------------------"); + mput_char('-', strlen(title)); + putchar('\n'); + pretty_print_string_list(other_cmds, longest); + putchar('\n'); + } +} + +int is_in_cmdlist(struct cmdnames *c, const char *s) +{ + int i; + for (i = 0; i < c->cnt; i++) + if (!strcmp(s, c->names[i]->name)) + return 1; + return 0; +} + +static int autocorrect; +static struct cmdnames aliases; + +static int perf_unknown_cmd_config(const char *var, const char *value, void *cb) +{ + if (!strcmp(var, "help.autocorrect")) + autocorrect = perf_config_int(var,value); + /* Also use aliases for command lookup */ + if (!prefixcmp(var, "alias.")) + add_cmdname(&aliases, var + 6, strlen(var + 6)); + + return perf_default_config(var, value, cb); +} + +static int levenshtein_compare(const void *p1, const void *p2) +{ + const struct cmdname *const *c1 = p1, *const *c2 = p2; + const char *s1 = (*c1)->name, *s2 = (*c2)->name; + int l1 = (*c1)->len; + int l2 = (*c2)->len; + return l1 != l2 ? l1 - l2 : strcmp(s1, s2); +} + +static void add_cmd_list(struct cmdnames *cmds, struct cmdnames *old) +{ + int i; + ALLOC_GROW(cmds->names, cmds->cnt + old->cnt, cmds->alloc); + + for (i = 0; i < old->cnt; i++) + cmds->names[cmds->cnt++] = old->names[i]; + free(old->names); + old->cnt = 0; + old->names = NULL; +} + +const char *help_unknown_cmd(const char *cmd) +{ + int i, n = 0, best_similarity = 0; + struct cmdnames main_cmds, other_cmds; + + memset(&main_cmds, 0, sizeof(main_cmds)); + memset(&other_cmds, 0, sizeof(main_cmds)); + memset(&aliases, 0, sizeof(aliases)); + + perf_config(perf_unknown_cmd_config, NULL); + + load_command_list("perf-", &main_cmds, &other_cmds); + + add_cmd_list(&main_cmds, &aliases); + add_cmd_list(&main_cmds, &other_cmds); + qsort(main_cmds.names, main_cmds.cnt, + sizeof(main_cmds.names), cmdname_compare); + uniq(&main_cmds); + + if (main_cmds.cnt) { + /* This reuses cmdname->len for similarity index */ + for (i = 0; i < main_cmds.cnt; ++i) + main_cmds.names[i]->len = + levenshtein(cmd, main_cmds.names[i]->name, 0, 2, 1, 4); + + qsort(main_cmds.names, main_cmds.cnt, + sizeof(*main_cmds.names), levenshtein_compare); + + best_similarity = main_cmds.names[0]->len; + n = 1; + while (n < main_cmds.cnt && best_similarity == main_cmds.names[n]->len) + ++n; + } + + if (autocorrect && n == 1) { + const char *assumed = main_cmds.names[0]->name; + + main_cmds.names[0] = NULL; + clean_cmdnames(&main_cmds); + fprintf(stderr, "WARNING: You called a Git program named '%s', " + "which does not exist.\n" + "Continuing under the assumption that you meant '%s'\n", + cmd, assumed); + if (autocorrect > 0) { + fprintf(stderr, "in %0.1f seconds automatically...\n", + (float)autocorrect/10.0); + poll(NULL, 0, autocorrect * 100); + } + return assumed; + } + + fprintf(stderr, "perf: '%s' is not a perf-command. See 'perf --help'.\n", cmd); + + if (main_cmds.cnt && best_similarity < 6) { + fprintf(stderr, "\nDid you mean %s?\n", + n < 2 ? "this": "one of these"); + + for (i = 0; i < n; i++) + fprintf(stderr, "\t%s\n", main_cmds.names[i]->name); + } + + exit(1); +} + +int cmd_version(int argc, const char **argv, const char *prefix) +{ + printf("perf version %s\n", perf_version_string); + return 0; +} diff --git a/trunk/tools/perf/util/help.h b/trunk/tools/perf/util/help.h new file mode 100644 index 000000000000..56bc15406ffc --- /dev/null +++ b/trunk/tools/perf/util/help.h @@ -0,0 +1,29 @@ +#ifndef HELP_H +#define HELP_H + +struct cmdnames { + int alloc; + int cnt; + struct cmdname { + size_t len; /* also used for similarity index in help.c */ + char name[FLEX_ARRAY]; + } **names; +}; + +static inline void mput_char(char c, unsigned int num) +{ + while(num--) + putchar(c); +} + +void load_command_list(const char *prefix, + struct cmdnames *main_cmds, + struct cmdnames *other_cmds); +void add_cmdname(struct cmdnames *cmds, const char *name, int len); +/* Here we require that excludes is a sorted list. */ +void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes); +int is_in_cmdlist(struct cmdnames *c, const char *s); +void list_commands(const char *title, struct cmdnames *main_cmds, + struct cmdnames *other_cmds); + +#endif /* HELP_H */ diff --git a/trunk/tools/perf/util/levenshtein.c b/trunk/tools/perf/util/levenshtein.c new file mode 100644 index 000000000000..e521d1516df6 --- /dev/null +++ b/trunk/tools/perf/util/levenshtein.c @@ -0,0 +1,84 @@ +#include "cache.h" +#include "levenshtein.h" + +/* + * This function implements the Damerau-Levenshtein algorithm to + * calculate a distance between strings. + * + * Basically, it says how many letters need to be swapped, substituted, + * deleted from, or added to string1, at least, to get string2. + * + * The idea is to build a distance matrix for the substrings of both + * strings. To avoid a large space complexity, only the last three rows + * are kept in memory (if swaps had the same or higher cost as one deletion + * plus one insertion, only two rows would be needed). + * + * At any stage, "i + 1" denotes the length of the current substring of + * string1 that the distance is calculated for. + * + * row2 holds the current row, row1 the previous row (i.e. for the substring + * of string1 of length "i"), and row0 the row before that. + * + * In other words, at the start of the big loop, row2[j + 1] contains the + * Damerau-Levenshtein distance between the substring of string1 of length + * "i" and the substring of string2 of length "j + 1". + * + * All the big loop does is determine the partial minimum-cost paths. + * + * It does so by calculating the costs of the path ending in characters + * i (in string1) and j (in string2), respectively, given that the last + * operation is a substition, a swap, a deletion, or an insertion. + * + * This implementation allows the costs to be weighted: + * + * - w (as in "sWap") + * - s (as in "Substitution") + * - a (for insertion, AKA "Add") + * - d (as in "Deletion") + * + * Note that this algorithm calculates a distance _iff_ d == a. + */ +int levenshtein(const char *string1, const char *string2, + int w, int s, int a, int d) +{ + int len1 = strlen(string1), len2 = strlen(string2); + int *row0 = malloc(sizeof(int) * (len2 + 1)); + int *row1 = malloc(sizeof(int) * (len2 + 1)); + int *row2 = malloc(sizeof(int) * (len2 + 1)); + int i, j; + + for (j = 0; j <= len2; j++) + row1[j] = j * a; + for (i = 0; i < len1; i++) { + int *dummy; + + row2[0] = (i + 1) * d; + for (j = 0; j < len2; j++) { + /* substitution */ + row2[j + 1] = row1[j] + s * (string1[i] != string2[j]); + /* swap */ + if (i > 0 && j > 0 && string1[i - 1] == string2[j] && + string1[i] == string2[j - 1] && + row2[j + 1] > row0[j - 1] + w) + row2[j + 1] = row0[j - 1] + w; + /* deletion */ + if (row2[j + 1] > row1[j + 1] + d) + row2[j + 1] = row1[j + 1] + d; + /* insertion */ + if (row2[j + 1] > row2[j] + a) + row2[j + 1] = row2[j] + a; + } + + dummy = row0; + row0 = row1; + row1 = row2; + row2 = dummy; + } + + i = row1[len2]; + free(row0); + free(row1); + free(row2); + + return i; +} diff --git a/trunk/tools/perf/util/levenshtein.h b/trunk/tools/perf/util/levenshtein.h new file mode 100644 index 000000000000..0173abeef52c --- /dev/null +++ b/trunk/tools/perf/util/levenshtein.h @@ -0,0 +1,8 @@ +#ifndef LEVENSHTEIN_H +#define LEVENSHTEIN_H + +int levenshtein(const char *string1, const char *string2, + int swap_penalty, int substition_penalty, + int insertion_penalty, int deletion_penalty); + +#endif diff --git a/trunk/tools/perf/util/list.h b/trunk/tools/perf/util/list.h new file mode 100644 index 000000000000..e2548e8072cf --- /dev/null +++ b/trunk/tools/perf/util/list.h @@ -0,0 +1,603 @@ +#ifndef _LINUX_LIST_H +#define _LINUX_LIST_H +/* + Copyright (C) Cast of dozens, comes from the Linux kernel + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. +*/ + +#include + +/* + * These are non-NULL pointers that will result in page faults + * under normal circumstances, used to verify that nobody uses + * non-initialized list entries. + */ +#define LIST_POISON1 ((void *)0x00100100) +#define LIST_POISON2 ((void *)0x00200200) + +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + +/* + * Simple doubly linked list implementation. + * + * Some of the internal functions ("__xxx") are useful when + * manipulating whole lists rather than single entries, as + * sometimes we already know the next/prev entries and we can + * generate better code by using them directly rather than + * using the generic single-entry routines. + */ + +struct list_head { + struct list_head *next, *prev; +}; + +#define LIST_HEAD_INIT(name) { &(name), &(name) } + +#define LIST_HEAD(name) \ + struct list_head name = LIST_HEAD_INIT(name) + +static inline void INIT_LIST_HEAD(struct list_head *list) +{ + list->next = list; + list->prev = list; +} + +/* + * Insert a new entry between two known consecutive entries. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_add(struct list_head *new, + struct list_head *prev, + struct list_head *next) +{ + next->prev = new; + new->next = next; + new->prev = prev; + prev->next = new; +} + +/** + * list_add - add a new entry + * @new: new entry to be added + * @head: list head to add it after + * + * Insert a new entry after the specified head. + * This is good for implementing stacks. + */ +static inline void list_add(struct list_head *new, struct list_head *head) +{ + __list_add(new, head, head->next); +} + +/** + * list_add_tail - add a new entry + * @new: new entry to be added + * @head: list head to add it before + * + * Insert a new entry before the specified head. + * This is useful for implementing queues. + */ +static inline void list_add_tail(struct list_head *new, struct list_head *head) +{ + __list_add(new, head->prev, head); +} + +/* + * Delete a list entry by making the prev/next entries + * point to each other. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_del(struct list_head * prev, struct list_head * next) +{ + next->prev = prev; + prev->next = next; +} + +/** + * list_del - deletes entry from list. + * @entry: the element to delete from the list. + * Note: list_empty on entry does not return true after this, the entry is + * in an undefined state. + */ +static inline void list_del(struct list_head *entry) +{ + __list_del(entry->prev, entry->next); + entry->next = LIST_POISON1; + entry->prev = LIST_POISON2; +} + +/** + * list_del_range - deletes range of entries from list. + * @beging: first element in the range to delete from the list. + * @beging: first element in the range to delete from the list. + * Note: list_empty on the range of entries does not return true after this, + * the entries is in an undefined state. + */ +static inline void list_del_range(struct list_head *begin, + struct list_head *end) +{ + begin->prev->next = end->next; + end->next->prev = begin->prev; +} + +/** + * list_replace - replace old entry by new one + * @old : the element to be replaced + * @new : the new element to insert + * Note: if 'old' was empty, it will be overwritten. + */ +static inline void list_replace(struct list_head *old, + struct list_head *new) +{ + new->next = old->next; + new->next->prev = new; + new->prev = old->prev; + new->prev->next = new; +} + +static inline void list_replace_init(struct list_head *old, + struct list_head *new) +{ + list_replace(old, new); + INIT_LIST_HEAD(old); +} + +/** + * list_del_init - deletes entry from list and reinitialize it. + * @entry: the element to delete from the list. + */ +static inline void list_del_init(struct list_head *entry) +{ + __list_del(entry->prev, entry->next); + INIT_LIST_HEAD(entry); +} + +/** + * list_move - delete from one list and add as another's head + * @list: the entry to move + * @head: the head that will precede our entry + */ +static inline void list_move(struct list_head *list, struct list_head *head) +{ + __list_del(list->prev, list->next); + list_add(list, head); +} + +/** + * list_move_tail - delete from one list and add as another's tail + * @list: the entry to move + * @head: the head that will follow our entry + */ +static inline void list_move_tail(struct list_head *list, + struct list_head *head) +{ + __list_del(list->prev, list->next); + list_add_tail(list, head); +} + +/** + * list_is_last - tests whether @list is the last entry in list @head + * @list: the entry to test + * @head: the head of the list + */ +static inline int list_is_last(const struct list_head *list, + const struct list_head *head) +{ + return list->next == head; +} + +/** + * list_empty - tests whether a list is empty + * @head: the list to test. + */ +static inline int list_empty(const struct list_head *head) +{ + return head->next == head; +} + +/** + * list_empty_careful - tests whether a list is empty and not being modified + * @head: the list to test + * + * Description: + * tests whether a list is empty _and_ checks that no other CPU might be + * in the process of modifying either member (next or prev) + * + * NOTE: using list_empty_careful() without synchronization + * can only be safe if the only activity that can happen + * to the list entry is list_del_init(). Eg. it cannot be used + * if another CPU could re-list_add() it. + */ +static inline int list_empty_careful(const struct list_head *head) +{ + struct list_head *next = head->next; + return (next == head) && (next == head->prev); +} + +static inline void __list_splice(struct list_head *list, + struct list_head *head) +{ + struct list_head *first = list->next; + struct list_head *last = list->prev; + struct list_head *at = head->next; + + first->prev = head; + head->next = first; + + last->next = at; + at->prev = last; +} + +/** + * list_splice - join two lists + * @list: the new list to add. + * @head: the place to add it in the first list. + */ +static inline void list_splice(struct list_head *list, struct list_head *head) +{ + if (!list_empty(list)) + __list_splice(list, head); +} + +/** + * list_splice_init - join two lists and reinitialise the emptied list. + * @list: the new list to add. + * @head: the place to add it in the first list. + * + * The list at @list is reinitialised + */ +static inline void list_splice_init(struct list_head *list, + struct list_head *head) +{ + if (!list_empty(list)) { + __list_splice(list, head); + INIT_LIST_HEAD(list); + } +} + +/** + * list_entry - get the struct for this entry + * @ptr: the &struct list_head pointer. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + */ +#define list_entry(ptr, type, member) \ + container_of(ptr, type, member) + +/** + * list_first_entry - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note, that list is expected to be not empty. + */ +#define list_first_entry(ptr, type, member) \ + list_entry((ptr)->next, type, member) + +/** + * list_for_each - iterate over a list + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + */ +#define list_for_each(pos, head) \ + for (pos = (head)->next; pos != (head); \ + pos = pos->next) + +/** + * __list_for_each - iterate over a list + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + * + * This variant differs from list_for_each() in that it's the + * simplest possible list iteration code, no prefetching is done. + * Use this for code that knows the list to be very short (empty + * or 1 entry) most of the time. + */ +#define __list_for_each(pos, head) \ + for (pos = (head)->next; pos != (head); pos = pos->next) + +/** + * list_for_each_prev - iterate over a list backwards + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + */ +#define list_for_each_prev(pos, head) \ + for (pos = (head)->prev; pos != (head); \ + pos = pos->prev) + +/** + * list_for_each_safe - iterate over a list safe against removal of list entry + * @pos: the &struct list_head to use as a loop cursor. + * @n: another &struct list_head to use as temporary storage + * @head: the head for your list. + */ +#define list_for_each_safe(pos, n, head) \ + for (pos = (head)->next, n = pos->next; pos != (head); \ + pos = n, n = pos->next) + +/** + * list_for_each_entry - iterate over list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry(pos, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_reverse - iterate backwards over list of given type. + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry_reverse(pos, head, member) \ + for (pos = list_entry((head)->prev, typeof(*pos), member); \ + &pos->member != (head); \ + pos = list_entry(pos->member.prev, typeof(*pos), member)) + +/** + * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue + * @pos: the type * to use as a start point + * @head: the head of the list + * @member: the name of the list_struct within the struct. + * + * Prepares a pos entry for use as a start point in list_for_each_entry_continue. + */ +#define list_prepare_entry(pos, head, member) \ + ((pos) ? : list_entry(head, typeof(*pos), member)) + +/** + * list_for_each_entry_continue - continue iteration over list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Continue to iterate over list of given type, continuing after + * the current position. + */ +#define list_for_each_entry_continue(pos, head, member) \ + for (pos = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_from - iterate over list of given type from the current point + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type, continuing from current position. + */ +#define list_for_each_entry_from(pos, head, member) \ + for (; &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry_safe(pos, n, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member), \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_continue + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type, continuing after current point, + * safe against removal of list entry. + */ +#define list_for_each_entry_safe_continue(pos, n, head, member) \ + for (pos = list_entry(pos->member.next, typeof(*pos), member), \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_from + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type from current point, safe against + * removal of list entry. + */ +#define list_for_each_entry_safe_from(pos, n, head, member) \ + for (n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_reverse + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate backwards over list of given type, safe against removal + * of list entry. + */ +#define list_for_each_entry_safe_reverse(pos, n, head, member) \ + for (pos = list_entry((head)->prev, typeof(*pos), member), \ + n = list_entry(pos->member.prev, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.prev, typeof(*n), member)) + +/* + * Double linked lists with a single pointer list head. + * Mostly useful for hash tables where the two pointer list head is + * too wasteful. + * You lose the ability to access the tail in O(1). + */ + +struct hlist_head { + struct hlist_node *first; +}; + +struct hlist_node { + struct hlist_node *next, **pprev; +}; + +#define HLIST_HEAD_INIT { .first = NULL } +#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } +#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) +static inline void INIT_HLIST_NODE(struct hlist_node *h) +{ + h->next = NULL; + h->pprev = NULL; +} + +static inline int hlist_unhashed(const struct hlist_node *h) +{ + return !h->pprev; +} + +static inline int hlist_empty(const struct hlist_head *h) +{ + return !h->first; +} + +static inline void __hlist_del(struct hlist_node *n) +{ + struct hlist_node *next = n->next; + struct hlist_node **pprev = n->pprev; + *pprev = next; + if (next) + next->pprev = pprev; +} + +static inline void hlist_del(struct hlist_node *n) +{ + __hlist_del(n); + n->next = LIST_POISON1; + n->pprev = LIST_POISON2; +} + +static inline void hlist_del_init(struct hlist_node *n) +{ + if (!hlist_unhashed(n)) { + __hlist_del(n); + INIT_HLIST_NODE(n); + } +} + +static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) +{ + struct hlist_node *first = h->first; + n->next = first; + if (first) + first->pprev = &n->next; + h->first = n; + n->pprev = &h->first; +} + +/* next must be != NULL */ +static inline void hlist_add_before(struct hlist_node *n, + struct hlist_node *next) +{ + n->pprev = next->pprev; + n->next = next; + next->pprev = &n->next; + *(n->pprev) = n; +} + +static inline void hlist_add_after(struct hlist_node *n, + struct hlist_node *next) +{ + next->next = n->next; + n->next = next; + next->pprev = &n->next; + + if(next->next) + next->next->pprev = &next->next; +} + +#define hlist_entry(ptr, type, member) container_of(ptr,type,member) + +#define hlist_for_each(pos, head) \ + for (pos = (head)->first; pos; \ + pos = pos->next) + +#define hlist_for_each_safe(pos, n, head) \ + for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \ + pos = n) + +/** + * hlist_for_each_entry - iterate over list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry(tpos, pos, head, member) \ + for (pos = (head)->first; \ + pos && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_continue - iterate over a hlist continuing after current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_continue(tpos, pos, member) \ + for (pos = (pos)->next; \ + pos && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_from - iterate over a hlist continuing from current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_from(tpos, pos, member) \ + for (; pos && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @n: another &struct hlist_node to use as temporary storage + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \ + for (pos = (head)->first; \ + pos && ({ n = pos->next; 1; }) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = n) + +#endif diff --git a/trunk/tools/perf/util/pager.c b/trunk/tools/perf/util/pager.c new file mode 100644 index 000000000000..a28bccae5458 --- /dev/null +++ b/trunk/tools/perf/util/pager.c @@ -0,0 +1,99 @@ +#include "cache.h" +#include "run-command.h" +#include "sigchain.h" + +/* + * This is split up from the rest of git so that we can do + * something different on Windows. + */ + +static int spawned_pager; + +#ifndef __MINGW32__ +static void pager_preexec(void) +{ + /* + * Work around bug in "less" by not starting it until we + * have real input + */ + fd_set in; + + FD_ZERO(&in); + FD_SET(0, &in); + select(1, &in, NULL, &in, NULL); + + setenv("LESS", "FRSX", 0); +} +#endif + +static const char *pager_argv[] = { "sh", "-c", NULL, NULL }; +static struct child_process pager_process; + +static void wait_for_pager(void) +{ + fflush(stdout); + fflush(stderr); + /* signal EOF to pager */ + close(1); + close(2); + finish_command(&pager_process); +} + +static void wait_for_pager_signal(int signo) +{ + wait_for_pager(); + sigchain_pop(signo); + raise(signo); +} + +void setup_pager(void) +{ + const char *pager = getenv("PERF_PAGER"); + + if (!isatty(1)) + return; + if (!pager) { + if (!pager_program) + perf_config(perf_default_config, NULL); + pager = pager_program; + } + if (!pager) + pager = getenv("PAGER"); + if (!pager) + pager = "less"; + else if (!*pager || !strcmp(pager, "cat")) + return; + + spawned_pager = 1; /* means we are emitting to terminal */ + + /* spawn the pager */ + pager_argv[2] = pager; + pager_process.argv = pager_argv; + pager_process.in = -1; +#ifndef __MINGW32__ + pager_process.preexec_cb = pager_preexec; +#endif + if (start_command(&pager_process)) + return; + + /* original process continues, but writes to the pipe */ + dup2(pager_process.in, 1); + if (isatty(2)) + dup2(pager_process.in, 2); + close(pager_process.in); + + /* this makes sure that the parent terminates after the pager */ + sigchain_push_common(wait_for_pager_signal); + atexit(wait_for_pager); +} + +int pager_in_use(void) +{ + const char *env; + + if (spawned_pager) + return 1; + + env = getenv("PERF_PAGER_IN_USE"); + return env ? perf_config_bool("PERF_PAGER_IN_USE", env) : 0; +} diff --git a/trunk/tools/perf/util/parse-events.c b/trunk/tools/perf/util/parse-events.c new file mode 100644 index 000000000000..9d5f1ca50e6f --- /dev/null +++ b/trunk/tools/perf/util/parse-events.c @@ -0,0 +1,316 @@ + +#include "../perf.h" +#include "util.h" +#include "parse-options.h" +#include "parse-events.h" +#include "exec_cmd.h" +#include "string.h" + +extern char *strcasestr(const char *haystack, const char *needle); + +int nr_counters; + +struct perf_counter_attr attrs[MAX_COUNTERS]; + +struct event_symbol { + __u8 type; + __u64 config; + char *symbol; +}; + +#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y +#define CR(x, y) .type = PERF_TYPE_##x, .config = y + +static struct event_symbol event_symbols[] = { + { C(HARDWARE, HW_CPU_CYCLES), "cpu-cycles", }, + { C(HARDWARE, HW_CPU_CYCLES), "cycles", }, + { C(HARDWARE, HW_INSTRUCTIONS), "instructions", }, + { C(HARDWARE, HW_CACHE_REFERENCES), "cache-references", }, + { C(HARDWARE, HW_CACHE_MISSES), "cache-misses", }, + { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions", }, + { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches", }, + { C(HARDWARE, HW_BRANCH_MISSES), "branch-misses", }, + { C(HARDWARE, HW_BUS_CYCLES), "bus-cycles", }, + + { C(SOFTWARE, SW_CPU_CLOCK), "cpu-clock", }, + { C(SOFTWARE, SW_TASK_CLOCK), "task-clock", }, + { C(SOFTWARE, SW_PAGE_FAULTS), "page-faults", }, + { C(SOFTWARE, SW_PAGE_FAULTS), "faults", }, + { C(SOFTWARE, SW_PAGE_FAULTS_MIN), "minor-faults", }, + { C(SOFTWARE, SW_PAGE_FAULTS_MAJ), "major-faults", }, + { C(SOFTWARE, SW_CONTEXT_SWITCHES), "context-switches", }, + { C(SOFTWARE, SW_CONTEXT_SWITCHES), "cs", }, + { C(SOFTWARE, SW_CPU_MIGRATIONS), "cpu-migrations", }, + { C(SOFTWARE, SW_CPU_MIGRATIONS), "migrations", }, +}; + +#define __PERF_COUNTER_FIELD(config, name) \ + ((config & PERF_COUNTER_##name##_MASK) >> PERF_COUNTER_##name##_SHIFT) + +#define PERF_COUNTER_RAW(config) __PERF_COUNTER_FIELD(config, RAW) +#define PERF_COUNTER_CONFIG(config) __PERF_COUNTER_FIELD(config, CONFIG) +#define PERF_COUNTER_TYPE(config) __PERF_COUNTER_FIELD(config, TYPE) +#define PERF_COUNTER_ID(config) __PERF_COUNTER_FIELD(config, EVENT) + +static char *hw_event_names[] = { + "cycles", + "instructions", + "cache-references", + "cache-misses", + "branches", + "branch-misses", + "bus-cycles", +}; + +static char *sw_event_names[] = { + "cpu-clock-ticks", + "task-clock-ticks", + "page-faults", + "context-switches", + "CPU-migrations", + "minor-faults", + "major-faults", +}; + +#define MAX_ALIASES 8 + +static char *hw_cache [][MAX_ALIASES] = { + { "L1-data" , "l1-d", "l1d", "l1" }, + { "L1-instruction" , "l1-i", "l1i" }, + { "L2" , "l2" }, + { "Data-TLB" , "dtlb", "d-tlb" }, + { "Instruction-TLB" , "itlb", "i-tlb" }, + { "Branch" , "bpu" , "btb", "bpc" }, +}; + +static char *hw_cache_op [][MAX_ALIASES] = { + { "Load" , "read" }, + { "Store" , "write" }, + { "Prefetch" , "speculative-read", "speculative-load" }, +}; + +static char *hw_cache_result [][MAX_ALIASES] = { + { "Reference" , "ops", "access" }, + { "Miss" }, +}; + +char *event_name(int counter) +{ + __u64 config = attrs[counter].config; + int type = attrs[counter].type; + static char buf[32]; + + if (attrs[counter].type == PERF_TYPE_RAW) { + sprintf(buf, "raw 0x%llx", config); + return buf; + } + + switch (type) { + case PERF_TYPE_HARDWARE: + if (config < PERF_COUNT_HW_MAX) + return hw_event_names[config]; + return "unknown-hardware"; + + case PERF_TYPE_HW_CACHE: { + __u8 cache_type, cache_op, cache_result; + static char name[100]; + + cache_type = (config >> 0) & 0xff; + if (cache_type > PERF_COUNT_HW_CACHE_MAX) + return "unknown-ext-hardware-cache-type"; + + cache_op = (config >> 8) & 0xff; + if (cache_op > PERF_COUNT_HW_CACHE_OP_MAX) + return "unknown-ext-hardware-cache-op"; + + cache_result = (config >> 16) & 0xff; + if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX) + return "unknown-ext-hardware-cache-result"; + + sprintf(name, "%s-Cache-%s-%ses", + hw_cache[cache_type][0], + hw_cache_op[cache_op][0], + hw_cache_result[cache_result][0]); + + return name; + } + + case PERF_TYPE_SOFTWARE: + if (config < PERF_COUNT_SW_MAX) + return sw_event_names[config]; + return "unknown-software"; + + default: + break; + } + + return "unknown"; +} + +static int parse_aliases(const char *str, char *names[][MAX_ALIASES], int size) +{ + int i, j; + + for (i = 0; i < size; i++) { + for (j = 0; j < MAX_ALIASES; j++) { + if (!names[i][j]) + break; + if (strcasestr(str, names[i][j])) + return i; + } + } + + return -1; +} + +static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr) +{ + int cache_type = -1, cache_op = 0, cache_result = 0; + + cache_type = parse_aliases(str, hw_cache, PERF_COUNT_HW_CACHE_MAX); + /* + * No fallback - if we cannot get a clear cache type + * then bail out: + */ + if (cache_type == -1) + return -EINVAL; + + cache_op = parse_aliases(str, hw_cache_op, PERF_COUNT_HW_CACHE_OP_MAX); + /* + * Fall back to reads: + */ + if (cache_op == -1) + cache_op = PERF_COUNT_HW_CACHE_OP_READ; + + cache_result = parse_aliases(str, hw_cache_result, + PERF_COUNT_HW_CACHE_RESULT_MAX); + /* + * Fall back to accesses: + */ + if (cache_result == -1) + cache_result = PERF_COUNT_HW_CACHE_RESULT_ACCESS; + + attr->config = cache_type | (cache_op << 8) | (cache_result << 16); + attr->type = PERF_TYPE_HW_CACHE; + + return 0; +} + +/* + * Each event can have multiple symbolic names. + * Symbolic names are (almost) exactly matched. + */ +static int parse_event_symbols(const char *str, struct perf_counter_attr *attr) +{ + __u64 config, id; + int type; + unsigned int i; + const char *sep, *pstr; + + if (str[0] == 'r' && hex2u64(str + 1, &config) > 0) { + attr->type = PERF_TYPE_RAW; + attr->config = config; + + return 0; + } + + pstr = str; + sep = strchr(pstr, ':'); + if (sep) { + type = atoi(pstr); + pstr = sep + 1; + id = atoi(pstr); + sep = strchr(pstr, ':'); + if (sep) { + pstr = sep + 1; + if (strchr(pstr, 'k')) + attr->exclude_user = 1; + if (strchr(pstr, 'u')) + attr->exclude_kernel = 1; + } + attr->type = type; + attr->config = id; + + return 0; + } + + for (i = 0; i < ARRAY_SIZE(event_symbols); i++) { + if (!strncmp(str, event_symbols[i].symbol, + strlen(event_symbols[i].symbol))) { + + attr->type = event_symbols[i].type; + attr->config = event_symbols[i].config; + + return 0; + } + } + + return parse_generic_hw_symbols(str, attr); +} + +int parse_events(const struct option *opt, const char *str, int unset) +{ + struct perf_counter_attr attr; + int ret; + + memset(&attr, 0, sizeof(attr)); +again: + if (nr_counters == MAX_COUNTERS) + return -1; + + ret = parse_event_symbols(str, &attr); + if (ret < 0) + return ret; + + attrs[nr_counters] = attr; + nr_counters++; + + str = strstr(str, ","); + if (str) { + str++; + goto again; + } + + return 0; +} + +static const char * const event_type_descriptors[] = { + "", + "Hardware event", + "Software event", + "Tracepoint event", + "Hardware cache event", +}; + +/* + * Print the help text for the event symbols: + */ +void print_events(void) +{ + struct event_symbol *syms = event_symbols; + unsigned int i, type, prev_type = -1; + + fprintf(stderr, "\n"); + fprintf(stderr, "List of pre-defined events (to be used in -e):\n"); + + for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) { + type = syms->type + 1; + if (type > ARRAY_SIZE(event_type_descriptors)) + type = 0; + + if (type != prev_type) + fprintf(stderr, "\n"); + + fprintf(stderr, " %-30s [%s]\n", syms->symbol, + event_type_descriptors[type]); + + prev_type = type; + } + + fprintf(stderr, "\n"); + fprintf(stderr, " %-30s [raw hardware event descriptor]\n", + "rNNN"); + fprintf(stderr, "\n"); + + exit(129); +} diff --git a/trunk/tools/perf/util/parse-events.h b/trunk/tools/perf/util/parse-events.h new file mode 100644 index 000000000000..e3d552908e60 --- /dev/null +++ b/trunk/tools/perf/util/parse-events.h @@ -0,0 +1,17 @@ + +/* + * Parse symbolic events/counts passed in as options: + */ + +extern int nr_counters; + +extern struct perf_counter_attr attrs[MAX_COUNTERS]; + +extern char *event_name(int ctr); + +extern int parse_events(const struct option *opt, const char *str, int unset); + +#define EVENTS_HELP_MAX (128*1024) + +extern void print_events(void); + diff --git a/trunk/tools/perf/util/parse-options.c b/trunk/tools/perf/util/parse-options.c new file mode 100644 index 000000000000..b3affb1658d2 --- /dev/null +++ b/trunk/tools/perf/util/parse-options.c @@ -0,0 +1,508 @@ +#include "util.h" +#include "parse-options.h" +#include "cache.h" + +#define OPT_SHORT 1 +#define OPT_UNSET 2 + +static int opterror(const struct option *opt, const char *reason, int flags) +{ + if (flags & OPT_SHORT) + return error("switch `%c' %s", opt->short_name, reason); + if (flags & OPT_UNSET) + return error("option `no-%s' %s", opt->long_name, reason); + return error("option `%s' %s", opt->long_name, reason); +} + +static int get_arg(struct parse_opt_ctx_t *p, const struct option *opt, + int flags, const char **arg) +{ + if (p->opt) { + *arg = p->opt; + p->opt = NULL; + } else if (p->argc == 1 && (opt->flags & PARSE_OPT_LASTARG_DEFAULT)) { + *arg = (const char *)opt->defval; + } else if (p->argc > 1) { + p->argc--; + *arg = *++p->argv; + } else + return opterror(opt, "requires a value", flags); + return 0; +} + +static int get_value(struct parse_opt_ctx_t *p, + const struct option *opt, int flags) +{ + const char *s, *arg = NULL; + const int unset = flags & OPT_UNSET; + + if (unset && p->opt) + return opterror(opt, "takes no value", flags); + if (unset && (opt->flags & PARSE_OPT_NONEG)) + return opterror(opt, "isn't available", flags); + + if (!(flags & OPT_SHORT) && p->opt) { + switch (opt->type) { + case OPTION_CALLBACK: + if (!(opt->flags & PARSE_OPT_NOARG)) + break; + /* FALLTHROUGH */ + case OPTION_BOOLEAN: + case OPTION_BIT: + case OPTION_SET_INT: + case OPTION_SET_PTR: + return opterror(opt, "takes no value", flags); + default: + break; + } + } + + switch (opt->type) { + case OPTION_BIT: + if (unset) + *(int *)opt->value &= ~opt->defval; + else + *(int *)opt->value |= opt->defval; + return 0; + + case OPTION_BOOLEAN: + *(int *)opt->value = unset ? 0 : *(int *)opt->value + 1; + return 0; + + case OPTION_SET_INT: + *(int *)opt->value = unset ? 0 : opt->defval; + return 0; + + case OPTION_SET_PTR: + *(void **)opt->value = unset ? NULL : (void *)opt->defval; + return 0; + + case OPTION_STRING: + if (unset) + *(const char **)opt->value = NULL; + else if (opt->flags & PARSE_OPT_OPTARG && !p->opt) + *(const char **)opt->value = (const char *)opt->defval; + else + return get_arg(p, opt, flags, (const char **)opt->value); + return 0; + + case OPTION_CALLBACK: + if (unset) + return (*opt->callback)(opt, NULL, 1) ? (-1) : 0; + if (opt->flags & PARSE_OPT_NOARG) + return (*opt->callback)(opt, NULL, 0) ? (-1) : 0; + if (opt->flags & PARSE_OPT_OPTARG && !p->opt) + return (*opt->callback)(opt, NULL, 0) ? (-1) : 0; + if (get_arg(p, opt, flags, &arg)) + return -1; + return (*opt->callback)(opt, arg, 0) ? (-1) : 0; + + case OPTION_INTEGER: + if (unset) { + *(int *)opt->value = 0; + return 0; + } + if (opt->flags & PARSE_OPT_OPTARG && !p->opt) { + *(int *)opt->value = opt->defval; + return 0; + } + if (get_arg(p, opt, flags, &arg)) + return -1; + *(int *)opt->value = strtol(arg, (char **)&s, 10); + if (*s) + return opterror(opt, "expects a numerical value", flags); + return 0; + + case OPTION_LONG: + if (unset) { + *(long *)opt->value = 0; + return 0; + } + if (opt->flags & PARSE_OPT_OPTARG && !p->opt) { + *(long *)opt->value = opt->defval; + return 0; + } + if (get_arg(p, opt, flags, &arg)) + return -1; + *(long *)opt->value = strtol(arg, (char **)&s, 10); + if (*s) + return opterror(opt, "expects a numerical value", flags); + return 0; + + default: + die("should not happen, someone must be hit on the forehead"); + } +} + +static int parse_short_opt(struct parse_opt_ctx_t *p, const struct option *options) +{ + for (; options->type != OPTION_END; options++) { + if (options->short_name == *p->opt) { + p->opt = p->opt[1] ? p->opt + 1 : NULL; + return get_value(p, options, OPT_SHORT); + } + } + return -2; +} + +static int parse_long_opt(struct parse_opt_ctx_t *p, const char *arg, + const struct option *options) +{ + const char *arg_end = strchr(arg, '='); + const struct option *abbrev_option = NULL, *ambiguous_option = NULL; + int abbrev_flags = 0, ambiguous_flags = 0; + + if (!arg_end) + arg_end = arg + strlen(arg); + + for (; options->type != OPTION_END; options++) { + const char *rest; + int flags = 0; + + if (!options->long_name) + continue; + + rest = skip_prefix(arg, options->long_name); + if (options->type == OPTION_ARGUMENT) { + if (!rest) + continue; + if (*rest == '=') + return opterror(options, "takes no value", flags); + if (*rest) + continue; + p->out[p->cpidx++] = arg - 2; + return 0; + } + if (!rest) { + /* abbreviated? */ + if (!strncmp(options->long_name, arg, arg_end - arg)) { +is_abbreviated: + if (abbrev_option) { + /* + * If this is abbreviated, it is + * ambiguous. So when there is no + * exact match later, we need to + * error out. + */ + ambiguous_option = abbrev_option; + ambiguous_flags = abbrev_flags; + } + if (!(flags & OPT_UNSET) && *arg_end) + p->opt = arg_end + 1; + abbrev_option = options; + abbrev_flags = flags; + continue; + } + /* negated and abbreviated very much? */ + if (!prefixcmp("no-", arg)) { + flags |= OPT_UNSET; + goto is_abbreviated; + } + /* negated? */ + if (strncmp(arg, "no-", 3)) + continue; + flags |= OPT_UNSET; + rest = skip_prefix(arg + 3, options->long_name); + /* abbreviated and negated? */ + if (!rest && !prefixcmp(options->long_name, arg + 3)) + goto is_abbreviated; + if (!rest) + continue; + } + if (*rest) { + if (*rest != '=') + continue; + p->opt = rest + 1; + } + return get_value(p, options, flags); + } + + if (ambiguous_option) + return error("Ambiguous option: %s " + "(could be --%s%s or --%s%s)", + arg, + (ambiguous_flags & OPT_UNSET) ? "no-" : "", + ambiguous_option->long_name, + (abbrev_flags & OPT_UNSET) ? "no-" : "", + abbrev_option->long_name); + if (abbrev_option) + return get_value(p, abbrev_option, abbrev_flags); + return -2; +} + +static void check_typos(const char *arg, const struct option *options) +{ + if (strlen(arg) < 3) + return; + + if (!prefixcmp(arg, "no-")) { + error ("did you mean `--%s` (with two dashes ?)", arg); + exit(129); + } + + for (; options->type != OPTION_END; options++) { + if (!options->long_name) + continue; + if (!prefixcmp(options->long_name, arg)) { + error ("did you mean `--%s` (with two dashes ?)", arg); + exit(129); + } + } +} + +void parse_options_start(struct parse_opt_ctx_t *ctx, + int argc, const char **argv, int flags) +{ + memset(ctx, 0, sizeof(*ctx)); + ctx->argc = argc - 1; + ctx->argv = argv + 1; + ctx->out = argv; + ctx->cpidx = ((flags & PARSE_OPT_KEEP_ARGV0) != 0); + ctx->flags = flags; + if ((flags & PARSE_OPT_KEEP_UNKNOWN) && + (flags & PARSE_OPT_STOP_AT_NON_OPTION)) + die("STOP_AT_NON_OPTION and KEEP_UNKNOWN don't go together"); +} + +static int usage_with_options_internal(const char * const *, + const struct option *, int); + +int parse_options_step(struct parse_opt_ctx_t *ctx, + const struct option *options, + const char * const usagestr[]) +{ + int internal_help = !(ctx->flags & PARSE_OPT_NO_INTERNAL_HELP); + + /* we must reset ->opt, unknown short option leave it dangling */ + ctx->opt = NULL; + + for (; ctx->argc; ctx->argc--, ctx->argv++) { + const char *arg = ctx->argv[0]; + + if (*arg != '-' || !arg[1]) { + if (ctx->flags & PARSE_OPT_STOP_AT_NON_OPTION) + break; + ctx->out[ctx->cpidx++] = ctx->argv[0]; + continue; + } + + if (arg[1] != '-') { + ctx->opt = arg + 1; + if (internal_help && *ctx->opt == 'h') + return parse_options_usage(usagestr, options); + switch (parse_short_opt(ctx, options)) { + case -1: + return parse_options_usage(usagestr, options); + case -2: + goto unknown; + } + if (ctx->opt) + check_typos(arg + 1, options); + while (ctx->opt) { + if (internal_help && *ctx->opt == 'h') + return parse_options_usage(usagestr, options); + switch (parse_short_opt(ctx, options)) { + case -1: + return parse_options_usage(usagestr, options); + case -2: + /* fake a short option thing to hide the fact that we may have + * started to parse aggregated stuff + * + * This is leaky, too bad. + */ + ctx->argv[0] = strdup(ctx->opt - 1); + *(char *)ctx->argv[0] = '-'; + goto unknown; + } + } + continue; + } + + if (!arg[2]) { /* "--" */ + if (!(ctx->flags & PARSE_OPT_KEEP_DASHDASH)) { + ctx->argc--; + ctx->argv++; + } + break; + } + + if (internal_help && !strcmp(arg + 2, "help-all")) + return usage_with_options_internal(usagestr, options, 1); + if (internal_help && !strcmp(arg + 2, "help")) + return parse_options_usage(usagestr, options); + switch (parse_long_opt(ctx, arg + 2, options)) { + case -1: + return parse_options_usage(usagestr, options); + case -2: + goto unknown; + } + continue; +unknown: + if (!(ctx->flags & PARSE_OPT_KEEP_UNKNOWN)) + return PARSE_OPT_UNKNOWN; + ctx->out[ctx->cpidx++] = ctx->argv[0]; + ctx->opt = NULL; + } + return PARSE_OPT_DONE; +} + +int parse_options_end(struct parse_opt_ctx_t *ctx) +{ + memmove(ctx->out + ctx->cpidx, ctx->argv, ctx->argc * sizeof(*ctx->out)); + ctx->out[ctx->cpidx + ctx->argc] = NULL; + return ctx->cpidx + ctx->argc; +} + +int parse_options(int argc, const char **argv, const struct option *options, + const char * const usagestr[], int flags) +{ + struct parse_opt_ctx_t ctx; + + parse_options_start(&ctx, argc, argv, flags); + switch (parse_options_step(&ctx, options, usagestr)) { + case PARSE_OPT_HELP: + exit(129); + case PARSE_OPT_DONE: + break; + default: /* PARSE_OPT_UNKNOWN */ + if (ctx.argv[0][1] == '-') { + error("unknown option `%s'", ctx.argv[0] + 2); + } else { + error("unknown switch `%c'", *ctx.opt); + } + usage_with_options(usagestr, options); + } + + return parse_options_end(&ctx); +} + +#define USAGE_OPTS_WIDTH 24 +#define USAGE_GAP 2 + +int usage_with_options_internal(const char * const *usagestr, + const struct option *opts, int full) +{ + if (!usagestr) + return PARSE_OPT_HELP; + + fprintf(stderr, "\n usage: %s\n", *usagestr++); + while (*usagestr && **usagestr) + fprintf(stderr, " or: %s\n", *usagestr++); + while (*usagestr) { + fprintf(stderr, "%s%s\n", + **usagestr ? " " : "", + *usagestr); + usagestr++; + } + + if (opts->type != OPTION_GROUP) + fputc('\n', stderr); + + for (; opts->type != OPTION_END; opts++) { + size_t pos; + int pad; + + if (opts->type == OPTION_GROUP) { + fputc('\n', stderr); + if (*opts->help) + fprintf(stderr, "%s\n", opts->help); + continue; + } + if (!full && (opts->flags & PARSE_OPT_HIDDEN)) + continue; + + pos = fprintf(stderr, " "); + if (opts->short_name) + pos += fprintf(stderr, "-%c", opts->short_name); + if (opts->long_name && opts->short_name) + pos += fprintf(stderr, ", "); + if (opts->long_name) + pos += fprintf(stderr, "--%s", opts->long_name); + + switch (opts->type) { + case OPTION_ARGUMENT: + break; + case OPTION_INTEGER: + if (opts->flags & PARSE_OPT_OPTARG) + if (opts->long_name) + pos += fprintf(stderr, "[=]"); + else + pos += fprintf(stderr, "[]"); + else + pos += fprintf(stderr, " "); + break; + case OPTION_CALLBACK: + if (opts->flags & PARSE_OPT_NOARG) + break; + /* FALLTHROUGH */ + case OPTION_STRING: + if (opts->argh) { + if (opts->flags & PARSE_OPT_OPTARG) + if (opts->long_name) + pos += fprintf(stderr, "[=<%s>]", opts->argh); + else + pos += fprintf(stderr, "[<%s>]", opts->argh); + else + pos += fprintf(stderr, " <%s>", opts->argh); + } else { + if (opts->flags & PARSE_OPT_OPTARG) + if (opts->long_name) + pos += fprintf(stderr, "[=...]"); + else + pos += fprintf(stderr, "[...]"); + else + pos += fprintf(stderr, " ..."); + } + break; + default: /* OPTION_{BIT,BOOLEAN,SET_INT,SET_PTR} */ + break; + } + + if (pos <= USAGE_OPTS_WIDTH) + pad = USAGE_OPTS_WIDTH - pos; + else { + fputc('\n', stderr); + pad = USAGE_OPTS_WIDTH; + } + fprintf(stderr, "%*s%s\n", pad + USAGE_GAP, "", opts->help); + } + fputc('\n', stderr); + + return PARSE_OPT_HELP; +} + +void usage_with_options(const char * const *usagestr, + const struct option *opts) +{ + usage_with_options_internal(usagestr, opts, 0); + exit(129); +} + +int parse_options_usage(const char * const *usagestr, + const struct option *opts) +{ + return usage_with_options_internal(usagestr, opts, 0); +} + + +int parse_opt_verbosity_cb(const struct option *opt, const char *arg, + int unset) +{ + int *target = opt->value; + + if (unset) + /* --no-quiet, --no-verbose */ + *target = 0; + else if (opt->short_name == 'v') { + if (*target >= 0) + (*target)++; + else + *target = 1; + } else { + if (*target <= 0) + (*target)--; + else + *target = -1; + } + return 0; +} diff --git a/trunk/tools/perf/util/parse-options.h b/trunk/tools/perf/util/parse-options.h new file mode 100644 index 000000000000..a1039a6ce0eb --- /dev/null +++ b/trunk/tools/perf/util/parse-options.h @@ -0,0 +1,174 @@ +#ifndef PARSE_OPTIONS_H +#define PARSE_OPTIONS_H + +enum parse_opt_type { + /* special types */ + OPTION_END, + OPTION_ARGUMENT, + OPTION_GROUP, + /* options with no arguments */ + OPTION_BIT, + OPTION_BOOLEAN, /* _INCR would have been a better name */ + OPTION_SET_INT, + OPTION_SET_PTR, + /* options with arguments (usually) */ + OPTION_STRING, + OPTION_INTEGER, + OPTION_LONG, + OPTION_CALLBACK, +}; + +enum parse_opt_flags { + PARSE_OPT_KEEP_DASHDASH = 1, + PARSE_OPT_STOP_AT_NON_OPTION = 2, + PARSE_OPT_KEEP_ARGV0 = 4, + PARSE_OPT_KEEP_UNKNOWN = 8, + PARSE_OPT_NO_INTERNAL_HELP = 16, +}; + +enum parse_opt_option_flags { + PARSE_OPT_OPTARG = 1, + PARSE_OPT_NOARG = 2, + PARSE_OPT_NONEG = 4, + PARSE_OPT_HIDDEN = 8, + PARSE_OPT_LASTARG_DEFAULT = 16, +}; + +struct option; +typedef int parse_opt_cb(const struct option *, const char *arg, int unset); + +/* + * `type`:: + * holds the type of the option, you must have an OPTION_END last in your + * array. + * + * `short_name`:: + * the character to use as a short option name, '\0' if none. + * + * `long_name`:: + * the long option name, without the leading dashes, NULL if none. + * + * `value`:: + * stores pointers to the values to be filled. + * + * `argh`:: + * token to explain the kind of argument this option wants. Keep it + * homogenous across the repository. + * + * `help`:: + * the short help associated to what the option does. + * Must never be NULL (except for OPTION_END). + * OPTION_GROUP uses this pointer to store the group header. + * + * `flags`:: + * mask of parse_opt_option_flags. + * PARSE_OPT_OPTARG: says that the argument is optionnal (not for BOOLEANs) + * PARSE_OPT_NOARG: says that this option takes no argument, for CALLBACKs + * PARSE_OPT_NONEG: says that this option cannot be negated + * PARSE_OPT_HIDDEN this option is skipped in the default usage, showed in + * the long one. + * + * `callback`:: + * pointer to the callback to use for OPTION_CALLBACK. + * + * `defval`:: + * default value to fill (*->value) with for PARSE_OPT_OPTARG. + * OPTION_{BIT,SET_INT,SET_PTR} store the {mask,integer,pointer} to put in + * the value when met. + * CALLBACKS can use it like they want. + */ +struct option { + enum parse_opt_type type; + int short_name; + const char *long_name; + void *value; + const char *argh; + const char *help; + + int flags; + parse_opt_cb *callback; + intptr_t defval; +}; + +#define OPT_END() { OPTION_END } +#define OPT_ARGUMENT(l, h) { OPTION_ARGUMENT, 0, (l), NULL, NULL, (h) } +#define OPT_GROUP(h) { OPTION_GROUP, 0, NULL, NULL, NULL, (h) } +#define OPT_BIT(s, l, v, h, b) { OPTION_BIT, (s), (l), (v), NULL, (h), 0, NULL, (b) } +#define OPT_BOOLEAN(s, l, v, h) { OPTION_BOOLEAN, (s), (l), (v), NULL, (h) } +#define OPT_SET_INT(s, l, v, h, i) { OPTION_SET_INT, (s), (l), (v), NULL, (h), 0, NULL, (i) } +#define OPT_SET_PTR(s, l, v, h, p) { OPTION_SET_PTR, (s), (l), (v), NULL, (h), 0, NULL, (p) } +#define OPT_INTEGER(s, l, v, h) { OPTION_INTEGER, (s), (l), (v), NULL, (h) } +#define OPT_LONG(s, l, v, h) { OPTION_LONG, (s), (l), (v), NULL, (h) } +#define OPT_STRING(s, l, v, a, h) { OPTION_STRING, (s), (l), (v), (a), (h) } +#define OPT_DATE(s, l, v, h) \ + { OPTION_CALLBACK, (s), (l), (v), "time",(h), 0, \ + parse_opt_approxidate_cb } +#define OPT_CALLBACK(s, l, v, a, h, f) \ + { OPTION_CALLBACK, (s), (l), (v), (a), (h), 0, (f) } + +/* parse_options() will filter out the processed options and leave the + * non-option argments in argv[]. + * Returns the number of arguments left in argv[]. + */ +extern int parse_options(int argc, const char **argv, + const struct option *options, + const char * const usagestr[], int flags); + +extern NORETURN void usage_with_options(const char * const *usagestr, + const struct option *options); + +/*----- incremantal advanced APIs -----*/ + +enum { + PARSE_OPT_HELP = -1, + PARSE_OPT_DONE, + PARSE_OPT_UNKNOWN, +}; + +/* + * It's okay for the caller to consume argv/argc in the usual way. + * Other fields of that structure are private to parse-options and should not + * be modified in any way. + */ +struct parse_opt_ctx_t { + const char **argv; + const char **out; + int argc, cpidx; + const char *opt; + int flags; +}; + +extern int parse_options_usage(const char * const *usagestr, + const struct option *opts); + +extern void parse_options_start(struct parse_opt_ctx_t *ctx, + int argc, const char **argv, int flags); + +extern int parse_options_step(struct parse_opt_ctx_t *ctx, + const struct option *options, + const char * const usagestr[]); + +extern int parse_options_end(struct parse_opt_ctx_t *ctx); + + +/*----- some often used options -----*/ +extern int parse_opt_abbrev_cb(const struct option *, const char *, int); +extern int parse_opt_approxidate_cb(const struct option *, const char *, int); +extern int parse_opt_verbosity_cb(const struct option *, const char *, int); + +#define OPT__VERBOSE(var) OPT_BOOLEAN('v', "verbose", (var), "be verbose") +#define OPT__QUIET(var) OPT_BOOLEAN('q', "quiet", (var), "be quiet") +#define OPT__VERBOSITY(var) \ + { OPTION_CALLBACK, 'v', "verbose", (var), NULL, "be more verbose", \ + PARSE_OPT_NOARG, &parse_opt_verbosity_cb, 0 }, \ + { OPTION_CALLBACK, 'q', "quiet", (var), NULL, "be more quiet", \ + PARSE_OPT_NOARG, &parse_opt_verbosity_cb, 0 } +#define OPT__DRY_RUN(var) OPT_BOOLEAN('n', "dry-run", (var), "dry run") +#define OPT__ABBREV(var) \ + { OPTION_CALLBACK, 0, "abbrev", (var), "n", \ + "use digits to display SHA-1s", \ + PARSE_OPT_OPTARG, &parse_opt_abbrev_cb, 0 } + +extern const char *parse_options_fix_filename(const char *prefix, const char *file); + +#endif diff --git a/trunk/tools/perf/util/path.c b/trunk/tools/perf/util/path.c new file mode 100644 index 000000000000..a501a40dd2cb --- /dev/null +++ b/trunk/tools/perf/util/path.c @@ -0,0 +1,353 @@ +/* + * I'm tired of doing "vsnprintf()" etc just to open a + * file, so here's a "return static buffer with printf" + * interface for paths. + * + * It's obviously not thread-safe. Sue me. But it's quite + * useful for doing things like + * + * f = open(mkpath("%s/%s.perf", base, name), O_RDONLY); + * + * which is what it's designed for. + */ +#include "cache.h" + +static char bad_path[] = "/bad-path/"; +/* + * Two hacks: + */ + +static char *get_perf_dir(void) +{ + return "."; +} + +size_t strlcpy(char *dest, const char *src, size_t size) +{ + size_t ret = strlen(src); + + if (size) { + size_t len = (ret >= size) ? size - 1 : ret; + memcpy(dest, src, len); + dest[len] = '\0'; + } + return ret; +} + + +static char *get_pathname(void) +{ + static char pathname_array[4][PATH_MAX]; + static int index; + return pathname_array[3 & ++index]; +} + +static char *cleanup_path(char *path) +{ + /* Clean it up */ + if (!memcmp(path, "./", 2)) { + path += 2; + while (*path == '/') + path++; + } + return path; +} + +char *mksnpath(char *buf, size_t n, const char *fmt, ...) +{ + va_list args; + unsigned len; + + va_start(args, fmt); + len = vsnprintf(buf, n, fmt, args); + va_end(args); + if (len >= n) { + strlcpy(buf, bad_path, n); + return buf; + } + return cleanup_path(buf); +} + +static char *perf_vsnpath(char *buf, size_t n, const char *fmt, va_list args) +{ + const char *perf_dir = get_perf_dir(); + size_t len; + + len = strlen(perf_dir); + if (n < len + 1) + goto bad; + memcpy(buf, perf_dir, len); + if (len && !is_dir_sep(perf_dir[len-1])) + buf[len++] = '/'; + len += vsnprintf(buf + len, n - len, fmt, args); + if (len >= n) + goto bad; + return cleanup_path(buf); +bad: + strlcpy(buf, bad_path, n); + return buf; +} + +char *perf_snpath(char *buf, size_t n, const char *fmt, ...) +{ + va_list args; + va_start(args, fmt); + (void)perf_vsnpath(buf, n, fmt, args); + va_end(args); + return buf; +} + +char *perf_pathdup(const char *fmt, ...) +{ + char path[PATH_MAX]; + va_list args; + va_start(args, fmt); + (void)perf_vsnpath(path, sizeof(path), fmt, args); + va_end(args); + return xstrdup(path); +} + +char *mkpath(const char *fmt, ...) +{ + va_list args; + unsigned len; + char *pathname = get_pathname(); + + va_start(args, fmt); + len = vsnprintf(pathname, PATH_MAX, fmt, args); + va_end(args); + if (len >= PATH_MAX) + return bad_path; + return cleanup_path(pathname); +} + +char *perf_path(const char *fmt, ...) +{ + const char *perf_dir = get_perf_dir(); + char *pathname = get_pathname(); + va_list args; + unsigned len; + + len = strlen(perf_dir); + if (len > PATH_MAX-100) + return bad_path; + memcpy(pathname, perf_dir, len); + if (len && perf_dir[len-1] != '/') + pathname[len++] = '/'; + va_start(args, fmt); + len += vsnprintf(pathname + len, PATH_MAX - len, fmt, args); + va_end(args); + if (len >= PATH_MAX) + return bad_path; + return cleanup_path(pathname); +} + + +/* perf_mkstemp() - create tmp file honoring TMPDIR variable */ +int perf_mkstemp(char *path, size_t len, const char *template) +{ + const char *tmp; + size_t n; + + tmp = getenv("TMPDIR"); + if (!tmp) + tmp = "/tmp"; + n = snprintf(path, len, "%s/%s", tmp, template); + if (len <= n) { + errno = ENAMETOOLONG; + return -1; + } + return mkstemp(path); +} + + +const char *make_relative_path(const char *abs, const char *base) +{ + static char buf[PATH_MAX + 1]; + int baselen; + if (!base) + return abs; + baselen = strlen(base); + if (prefixcmp(abs, base)) + return abs; + if (abs[baselen] == '/') + baselen++; + else if (base[baselen - 1] != '/') + return abs; + strcpy(buf, abs + baselen); + return buf; +} + +/* + * It is okay if dst == src, but they should not overlap otherwise. + * + * Performs the following normalizations on src, storing the result in dst: + * - Ensures that components are separated by '/' (Windows only) + * - Squashes sequences of '/'. + * - Removes "." components. + * - Removes ".." components, and the components the precede them. + * Returns failure (non-zero) if a ".." component appears as first path + * component anytime during the normalization. Otherwise, returns success (0). + * + * Note that this function is purely textual. It does not follow symlinks, + * verify the existence of the path, or make any system calls. + */ +int normalize_path_copy(char *dst, const char *src) +{ + char *dst0; + + if (has_dos_drive_prefix(src)) { + *dst++ = *src++; + *dst++ = *src++; + } + dst0 = dst; + + if (is_dir_sep(*src)) { + *dst++ = '/'; + while (is_dir_sep(*src)) + src++; + } + + for (;;) { + char c = *src; + + /* + * A path component that begins with . could be + * special: + * (1) "." and ends -- ignore and terminate. + * (2) "./" -- ignore them, eat slash and continue. + * (3) ".." and ends -- strip one and terminate. + * (4) "../" -- strip one, eat slash and continue. + */ + if (c == '.') { + if (!src[1]) { + /* (1) */ + src++; + } else if (is_dir_sep(src[1])) { + /* (2) */ + src += 2; + while (is_dir_sep(*src)) + src++; + continue; + } else if (src[1] == '.') { + if (!src[2]) { + /* (3) */ + src += 2; + goto up_one; + } else if (is_dir_sep(src[2])) { + /* (4) */ + src += 3; + while (is_dir_sep(*src)) + src++; + goto up_one; + } + } + } + + /* copy up to the next '/', and eat all '/' */ + while ((c = *src++) != '\0' && !is_dir_sep(c)) + *dst++ = c; + if (is_dir_sep(c)) { + *dst++ = '/'; + while (is_dir_sep(c)) + c = *src++; + src--; + } else if (!c) + break; + continue; + + up_one: + /* + * dst0..dst is prefix portion, and dst[-1] is '/'; + * go up one level. + */ + dst--; /* go to trailing '/' */ + if (dst <= dst0) + return -1; + /* Windows: dst[-1] cannot be backslash anymore */ + while (dst0 < dst && dst[-1] != '/') + dst--; + } + *dst = '\0'; + return 0; +} + +/* + * path = Canonical absolute path + * prefix_list = Colon-separated list of absolute paths + * + * Determines, for each path in prefix_list, whether the "prefix" really + * is an ancestor directory of path. Returns the length of the longest + * ancestor directory, excluding any trailing slashes, or -1 if no prefix + * is an ancestor. (Note that this means 0 is returned if prefix_list is + * "/".) "/foo" is not considered an ancestor of "/foobar". Directories + * are not considered to be their own ancestors. path must be in a + * canonical form: empty components, or "." or ".." components are not + * allowed. prefix_list may be null, which is like "". + */ +int longest_ancestor_length(const char *path, const char *prefix_list) +{ + char buf[PATH_MAX+1]; + const char *ceil, *colon; + int len, max_len = -1; + + if (prefix_list == NULL || !strcmp(path, "/")) + return -1; + + for (colon = ceil = prefix_list; *colon; ceil = colon+1) { + for (colon = ceil; *colon && *colon != PATH_SEP; colon++); + len = colon - ceil; + if (len == 0 || len > PATH_MAX || !is_absolute_path(ceil)) + continue; + strlcpy(buf, ceil, len+1); + if (normalize_path_copy(buf, buf) < 0) + continue; + len = strlen(buf); + if (len > 0 && buf[len-1] == '/') + buf[--len] = '\0'; + + if (!strncmp(path, buf, len) && + path[len] == '/' && + len > max_len) { + max_len = len; + } + } + + return max_len; +} + +/* strip arbitrary amount of directory separators at end of path */ +static inline int chomp_trailing_dir_sep(const char *path, int len) +{ + while (len && is_dir_sep(path[len - 1])) + len--; + return len; +} + +/* + * If path ends with suffix (complete path components), returns the + * part before suffix (sans trailing directory separators). + * Otherwise returns NULL. + */ +char *strip_path_suffix(const char *path, const char *suffix) +{ + int path_len = strlen(path), suffix_len = strlen(suffix); + + while (suffix_len) { + if (!path_len) + return NULL; + + if (is_dir_sep(path[path_len - 1])) { + if (!is_dir_sep(suffix[suffix_len - 1])) + return NULL; + path_len = chomp_trailing_dir_sep(path, path_len); + suffix_len = chomp_trailing_dir_sep(suffix, suffix_len); + } + else if (path[--path_len] != suffix[--suffix_len]) + return NULL; + } + + if (path_len && !is_dir_sep(path[path_len - 1])) + return NULL; + return xstrndup(path, chomp_trailing_dir_sep(path, path_len)); +} diff --git a/trunk/tools/perf/util/quote.c b/trunk/tools/perf/util/quote.c new file mode 100644 index 000000000000..f18c5212bc92 --- /dev/null +++ b/trunk/tools/perf/util/quote.c @@ -0,0 +1,481 @@ +#include "cache.h" +#include "quote.h" + +int quote_path_fully = 1; + +/* Help to copy the thing properly quoted for the shell safety. + * any single quote is replaced with '\'', any exclamation point + * is replaced with '\!', and the whole thing is enclosed in a + * + * E.g. + * original sq_quote result + * name ==> name ==> 'name' + * a b ==> a b ==> 'a b' + * a'b ==> a'\''b ==> 'a'\''b' + * a!b ==> a'\!'b ==> 'a'\!'b' + */ +static inline int need_bs_quote(char c) +{ + return (c == '\'' || c == '!'); +} + +void sq_quote_buf(struct strbuf *dst, const char *src) +{ + char *to_free = NULL; + + if (dst->buf == src) + to_free = strbuf_detach(dst, NULL); + + strbuf_addch(dst, '\''); + while (*src) { + size_t len = strcspn(src, "'!"); + strbuf_add(dst, src, len); + src += len; + while (need_bs_quote(*src)) { + strbuf_addstr(dst, "'\\"); + strbuf_addch(dst, *src++); + strbuf_addch(dst, '\''); + } + } + strbuf_addch(dst, '\''); + free(to_free); +} + +void sq_quote_print(FILE *stream, const char *src) +{ + char c; + + fputc('\'', stream); + while ((c = *src++)) { + if (need_bs_quote(c)) { + fputs("'\\", stream); + fputc(c, stream); + fputc('\'', stream); + } else { + fputc(c, stream); + } + } + fputc('\'', stream); +} + +void sq_quote_argv(struct strbuf *dst, const char** argv, size_t maxlen) +{ + int i; + + /* Copy into destination buffer. */ + strbuf_grow(dst, 255); + for (i = 0; argv[i]; ++i) { + strbuf_addch(dst, ' '); + sq_quote_buf(dst, argv[i]); + if (maxlen && dst->len > maxlen) + die("Too many or long arguments"); + } +} + +char *sq_dequote_step(char *arg, char **next) +{ + char *dst = arg; + char *src = arg; + char c; + + if (*src != '\'') + return NULL; + for (;;) { + c = *++src; + if (!c) + return NULL; + if (c != '\'') { + *dst++ = c; + continue; + } + /* We stepped out of sq */ + switch (*++src) { + case '\0': + *dst = 0; + if (next) + *next = NULL; + return arg; + case '\\': + c = *++src; + if (need_bs_quote(c) && *++src == '\'') { + *dst++ = c; + continue; + } + /* Fallthrough */ + default: + if (!next || !isspace(*src)) + return NULL; + do { + c = *++src; + } while (isspace(c)); + *dst = 0; + *next = src; + return arg; + } + } +} + +char *sq_dequote(char *arg) +{ + return sq_dequote_step(arg, NULL); +} + +int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc) +{ + char *next = arg; + + if (!*arg) + return 0; + do { + char *dequoted = sq_dequote_step(next, &next); + if (!dequoted) + return -1; + ALLOC_GROW(*argv, *nr + 1, *alloc); + (*argv)[(*nr)++] = dequoted; + } while (next); + + return 0; +} + +/* 1 means: quote as octal + * 0 means: quote as octal if (quote_path_fully) + * -1 means: never quote + * c: quote as "\\c" + */ +#define X8(x) x, x, x, x, x, x, x, x +#define X16(x) X8(x), X8(x) +static signed char const sq_lookup[256] = { + /* 0 1 2 3 4 5 6 7 */ + /* 0x00 */ 1, 1, 1, 1, 1, 1, 1, 'a', + /* 0x08 */ 'b', 't', 'n', 'v', 'f', 'r', 1, 1, + /* 0x10 */ X16(1), + /* 0x20 */ -1, -1, '"', -1, -1, -1, -1, -1, + /* 0x28 */ X16(-1), X16(-1), X16(-1), + /* 0x58 */ -1, -1, -1, -1,'\\', -1, -1, -1, + /* 0x60 */ X16(-1), X8(-1), + /* 0x78 */ -1, -1, -1, -1, -1, -1, -1, 1, + /* 0x80 */ /* set to 0 */ +}; + +static inline int sq_must_quote(char c) +{ + return sq_lookup[(unsigned char)c] + quote_path_fully > 0; +} + +/* returns the longest prefix not needing a quote up to maxlen if positive. + This stops at the first \0 because it's marked as a character needing an + escape */ +static size_t next_quote_pos(const char *s, ssize_t maxlen) +{ + size_t len; + if (maxlen < 0) { + for (len = 0; !sq_must_quote(s[len]); len++); + } else { + for (len = 0; len < maxlen && !sq_must_quote(s[len]); len++); + } + return len; +} + +/* + * C-style name quoting. + * + * (1) if sb and fp are both NULL, inspect the input name and counts the + * number of bytes that are needed to hold c_style quoted version of name, + * counting the double quotes around it but not terminating NUL, and + * returns it. + * However, if name does not need c_style quoting, it returns 0. + * + * (2) if sb or fp are not NULL, it emits the c_style quoted version + * of name, enclosed with double quotes if asked and needed only. + * Return value is the same as in (1). + */ +static size_t quote_c_style_counted(const char *name, ssize_t maxlen, + struct strbuf *sb, FILE *fp, int no_dq) +{ +#undef EMIT +#define EMIT(c) \ + do { \ + if (sb) strbuf_addch(sb, (c)); \ + if (fp) fputc((c), fp); \ + count++; \ + } while (0) +#define EMITBUF(s, l) \ + do { \ + int __ret; \ + if (sb) strbuf_add(sb, (s), (l)); \ + if (fp) __ret = fwrite((s), (l), 1, fp); \ + count += (l); \ + } while (0) + + size_t len, count = 0; + const char *p = name; + + for (;;) { + int ch; + + len = next_quote_pos(p, maxlen); + if (len == maxlen || !p[len]) + break; + + if (!no_dq && p == name) + EMIT('"'); + + EMITBUF(p, len); + EMIT('\\'); + p += len; + ch = (unsigned char)*p++; + if (sq_lookup[ch] >= ' ') { + EMIT(sq_lookup[ch]); + } else { + EMIT(((ch >> 6) & 03) + '0'); + EMIT(((ch >> 3) & 07) + '0'); + EMIT(((ch >> 0) & 07) + '0'); + } + } + + EMITBUF(p, len); + if (p == name) /* no ending quote needed */ + return 0; + + if (!no_dq) + EMIT('"'); + return count; +} + +size_t quote_c_style(const char *name, struct strbuf *sb, FILE *fp, int nodq) +{ + return quote_c_style_counted(name, -1, sb, fp, nodq); +} + +void quote_two_c_style(struct strbuf *sb, const char *prefix, const char *path, int nodq) +{ + if (quote_c_style(prefix, NULL, NULL, 0) || + quote_c_style(path, NULL, NULL, 0)) { + if (!nodq) + strbuf_addch(sb, '"'); + quote_c_style(prefix, sb, NULL, 1); + quote_c_style(path, sb, NULL, 1); + if (!nodq) + strbuf_addch(sb, '"'); + } else { + strbuf_addstr(sb, prefix); + strbuf_addstr(sb, path); + } +} + +void write_name_quoted(const char *name, FILE *fp, int terminator) +{ + if (terminator) { + quote_c_style(name, NULL, fp, 0); + } else { + fputs(name, fp); + } + fputc(terminator, fp); +} + +extern void write_name_quotedpfx(const char *pfx, size_t pfxlen, + const char *name, FILE *fp, int terminator) +{ + int needquote = 0; + + if (terminator) { + needquote = next_quote_pos(pfx, pfxlen) < pfxlen + || name[next_quote_pos(name, -1)]; + } + if (needquote) { + fputc('"', fp); + quote_c_style_counted(pfx, pfxlen, NULL, fp, 1); + quote_c_style(name, NULL, fp, 1); + fputc('"', fp); + } else { + int ret; + + ret = fwrite(pfx, pfxlen, 1, fp); + fputs(name, fp); + } + fputc(terminator, fp); +} + +/* quote path as relative to the given prefix */ +char *quote_path_relative(const char *in, int len, + struct strbuf *out, const char *prefix) +{ + int needquote; + + if (len < 0) + len = strlen(in); + + /* "../" prefix itself does not need quoting, but "in" might. */ + needquote = next_quote_pos(in, len) < len; + strbuf_setlen(out, 0); + strbuf_grow(out, len); + + if (needquote) + strbuf_addch(out, '"'); + if (prefix) { + int off = 0; + while (prefix[off] && off < len && prefix[off] == in[off]) + if (prefix[off] == '/') { + prefix += off + 1; + in += off + 1; + len -= off + 1; + off = 0; + } else + off++; + + for (; *prefix; prefix++) + if (*prefix == '/') + strbuf_addstr(out, "../"); + } + + quote_c_style_counted (in, len, out, NULL, 1); + + if (needquote) + strbuf_addch(out, '"'); + if (!out->len) + strbuf_addstr(out, "./"); + + return out->buf; +} + +/* + * C-style name unquoting. + * + * Quoted should point at the opening double quote. + * + Returns 0 if it was able to unquote the string properly, and appends the + * result in the strbuf `sb'. + * + Returns -1 in case of error, and doesn't touch the strbuf. Though note + * that this function will allocate memory in the strbuf, so calling + * strbuf_release is mandatory whichever result unquote_c_style returns. + * + * Updates endp pointer to point at one past the ending double quote if given. + */ +int unquote_c_style(struct strbuf *sb, const char *quoted, const char **endp) +{ + size_t oldlen = sb->len, len; + int ch, ac; + + if (*quoted++ != '"') + return -1; + + for (;;) { + len = strcspn(quoted, "\"\\"); + strbuf_add(sb, quoted, len); + quoted += len; + + switch (*quoted++) { + case '"': + if (endp) + *endp = quoted; + return 0; + case '\\': + break; + default: + goto error; + } + + switch ((ch = *quoted++)) { + case 'a': ch = '\a'; break; + case 'b': ch = '\b'; break; + case 'f': ch = '\f'; break; + case 'n': ch = '\n'; break; + case 'r': ch = '\r'; break; + case 't': ch = '\t'; break; + case 'v': ch = '\v'; break; + + case '\\': case '"': + break; /* verbatim */ + + /* octal values with first digit over 4 overflow */ + case '0': case '1': case '2': case '3': + ac = ((ch - '0') << 6); + if ((ch = *quoted++) < '0' || '7' < ch) + goto error; + ac |= ((ch - '0') << 3); + if ((ch = *quoted++) < '0' || '7' < ch) + goto error; + ac |= (ch - '0'); + ch = ac; + break; + default: + goto error; + } + strbuf_addch(sb, ch); + } + + error: + strbuf_setlen(sb, oldlen); + return -1; +} + +/* quoting as a string literal for other languages */ + +void perl_quote_print(FILE *stream, const char *src) +{ + const char sq = '\''; + const char bq = '\\'; + char c; + + fputc(sq, stream); + while ((c = *src++)) { + if (c == sq || c == bq) + fputc(bq, stream); + fputc(c, stream); + } + fputc(sq, stream); +} + +void python_quote_print(FILE *stream, const char *src) +{ + const char sq = '\''; + const char bq = '\\'; + const char nl = '\n'; + char c; + + fputc(sq, stream); + while ((c = *src++)) { + if (c == nl) { + fputc(bq, stream); + fputc('n', stream); + continue; + } + if (c == sq || c == bq) + fputc(bq, stream); + fputc(c, stream); + } + fputc(sq, stream); +} + +void tcl_quote_print(FILE *stream, const char *src) +{ + char c; + + fputc('"', stream); + while ((c = *src++)) { + switch (c) { + case '[': case ']': + case '{': case '}': + case '$': case '\\': case '"': + fputc('\\', stream); + default: + fputc(c, stream); + break; + case '\f': + fputs("\\f", stream); + break; + case '\r': + fputs("\\r", stream); + break; + case '\n': + fputs("\\n", stream); + break; + case '\t': + fputs("\\t", stream); + break; + case '\v': + fputs("\\v", stream); + break; + } + } + fputc('"', stream); +} diff --git a/trunk/tools/perf/util/quote.h b/trunk/tools/perf/util/quote.h new file mode 100644 index 000000000000..5dfad89816db --- /dev/null +++ b/trunk/tools/perf/util/quote.h @@ -0,0 +1,68 @@ +#ifndef QUOTE_H +#define QUOTE_H + +#include +#include + +/* Help to copy the thing properly quoted for the shell safety. + * any single quote is replaced with '\'', any exclamation point + * is replaced with '\!', and the whole thing is enclosed in a + * single quote pair. + * + * For example, if you are passing the result to system() as an + * argument: + * + * sprintf(cmd, "foobar %s %s", sq_quote(arg0), sq_quote(arg1)) + * + * would be appropriate. If the system() is going to call ssh to + * run the command on the other side: + * + * sprintf(cmd, "git-diff-tree %s %s", sq_quote(arg0), sq_quote(arg1)); + * sprintf(rcmd, "ssh %s %s", sq_util/quote.host), sq_quote(cmd)); + * + * Note that the above examples leak memory! Remember to free result from + * sq_quote() in a real application. + * + * sq_quote_buf() writes to an existing buffer of specified size; it + * will return the number of characters that would have been written + * excluding the final null regardless of the buffer size. + */ + +extern void sq_quote_print(FILE *stream, const char *src); + +extern void sq_quote_buf(struct strbuf *, const char *src); +extern void sq_quote_argv(struct strbuf *, const char **argv, size_t maxlen); + +/* This unwraps what sq_quote() produces in place, but returns + * NULL if the input does not look like what sq_quote would have + * produced. + */ +extern char *sq_dequote(char *); + +/* + * Same as the above, but can be used to unwrap many arguments in the + * same string separated by space. "next" is changed to point to the + * next argument that should be passed as first parameter. When there + * is no more argument to be dequoted, "next" is updated to point to NULL. + */ +extern char *sq_dequote_step(char *arg, char **next); +extern int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc); + +extern int unquote_c_style(struct strbuf *, const char *quoted, const char **endp); +extern size_t quote_c_style(const char *name, struct strbuf *, FILE *, int no_dq); +extern void quote_two_c_style(struct strbuf *, const char *, const char *, int); + +extern void write_name_quoted(const char *name, FILE *, int terminator); +extern void write_name_quotedpfx(const char *pfx, size_t pfxlen, + const char *name, FILE *, int terminator); + +/* quote path as relative to the given prefix */ +char *quote_path_relative(const char *in, int len, + struct strbuf *out, const char *prefix); + +/* quoting as a string literal for other languages */ +extern void perl_quote_print(FILE *stream, const char *src); +extern void python_quote_print(FILE *stream, const char *src); +extern void tcl_quote_print(FILE *stream, const char *src); + +#endif diff --git a/trunk/tools/perf/util/rbtree.c b/trunk/tools/perf/util/rbtree.c new file mode 100644 index 000000000000..b15ba9c7cb3f --- /dev/null +++ b/trunk/tools/perf/util/rbtree.c @@ -0,0 +1,383 @@ +/* + Red Black Trees + (C) 1999 Andrea Arcangeli + (C) 2002 David Woodhouse + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + linux/lib/rbtree.c +*/ + +#include "rbtree.h" + +static void __rb_rotate_left(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *right = node->rb_right; + struct rb_node *parent = rb_parent(node); + + if ((node->rb_right = right->rb_left)) + rb_set_parent(right->rb_left, node); + right->rb_left = node; + + rb_set_parent(right, parent); + + if (parent) + { + if (node == parent->rb_left) + parent->rb_left = right; + else + parent->rb_right = right; + } + else + root->rb_node = right; + rb_set_parent(node, right); +} + +static void __rb_rotate_right(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *left = node->rb_left; + struct rb_node *parent = rb_parent(node); + + if ((node->rb_left = left->rb_right)) + rb_set_parent(left->rb_right, node); + left->rb_right = node; + + rb_set_parent(left, parent); + + if (parent) + { + if (node == parent->rb_right) + parent->rb_right = left; + else + parent->rb_left = left; + } + else + root->rb_node = left; + rb_set_parent(node, left); +} + +void rb_insert_color(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *parent, *gparent; + + while ((parent = rb_parent(node)) && rb_is_red(parent)) + { + gparent = rb_parent(parent); + + if (parent == gparent->rb_left) + { + { + register struct rb_node *uncle = gparent->rb_right; + if (uncle && rb_is_red(uncle)) + { + rb_set_black(uncle); + rb_set_black(parent); + rb_set_red(gparent); + node = gparent; + continue; + } + } + + if (parent->rb_right == node) + { + register struct rb_node *tmp; + __rb_rotate_left(parent, root); + tmp = parent; + parent = node; + node = tmp; + } + + rb_set_black(parent); + rb_set_red(gparent); + __rb_rotate_right(gparent, root); + } else { + { + register struct rb_node *uncle = gparent->rb_left; + if (uncle && rb_is_red(uncle)) + { + rb_set_black(uncle); + rb_set_black(parent); + rb_set_red(gparent); + node = gparent; + continue; + } + } + + if (parent->rb_left == node) + { + register struct rb_node *tmp; + __rb_rotate_right(parent, root); + tmp = parent; + parent = node; + node = tmp; + } + + rb_set_black(parent); + rb_set_red(gparent); + __rb_rotate_left(gparent, root); + } + } + + rb_set_black(root->rb_node); +} + +static void __rb_erase_color(struct rb_node *node, struct rb_node *parent, + struct rb_root *root) +{ + struct rb_node *other; + + while ((!node || rb_is_black(node)) && node != root->rb_node) + { + if (parent->rb_left == node) + { + other = parent->rb_right; + if (rb_is_red(other)) + { + rb_set_black(other); + rb_set_red(parent); + __rb_rotate_left(parent, root); + other = parent->rb_right; + } + if ((!other->rb_left || rb_is_black(other->rb_left)) && + (!other->rb_right || rb_is_black(other->rb_right))) + { + rb_set_red(other); + node = parent; + parent = rb_parent(node); + } + else + { + if (!other->rb_right || rb_is_black(other->rb_right)) + { + rb_set_black(other->rb_left); + rb_set_red(other); + __rb_rotate_right(other, root); + other = parent->rb_right; + } + rb_set_color(other, rb_color(parent)); + rb_set_black(parent); + rb_set_black(other->rb_right); + __rb_rotate_left(parent, root); + node = root->rb_node; + break; + } + } + else + { + other = parent->rb_left; + if (rb_is_red(other)) + { + rb_set_black(other); + rb_set_red(parent); + __rb_rotate_right(parent, root); + other = parent->rb_left; + } + if ((!other->rb_left || rb_is_black(other->rb_left)) && + (!other->rb_right || rb_is_black(other->rb_right))) + { + rb_set_red(other); + node = parent; + parent = rb_parent(node); + } + else + { + if (!other->rb_left || rb_is_black(other->rb_left)) + { + rb_set_black(other->rb_right); + rb_set_red(other); + __rb_rotate_left(other, root); + other = parent->rb_left; + } + rb_set_color(other, rb_color(parent)); + rb_set_black(parent); + rb_set_black(other->rb_left); + __rb_rotate_right(parent, root); + node = root->rb_node; + break; + } + } + } + if (node) + rb_set_black(node); +} + +void rb_erase(struct rb_node *node, struct rb_root *root) +{ + struct rb_node *child, *parent; + int color; + + if (!node->rb_left) + child = node->rb_right; + else if (!node->rb_right) + child = node->rb_left; + else + { + struct rb_node *old = node, *left; + + node = node->rb_right; + while ((left = node->rb_left) != NULL) + node = left; + child = node->rb_right; + parent = rb_parent(node); + color = rb_color(node); + + if (child) + rb_set_parent(child, parent); + if (parent == old) { + parent->rb_right = child; + parent = node; + } else + parent->rb_left = child; + + node->rb_parent_color = old->rb_parent_color; + node->rb_right = old->rb_right; + node->rb_left = old->rb_left; + + if (rb_parent(old)) + { + if (rb_parent(old)->rb_left == old) + rb_parent(old)->rb_left = node; + else + rb_parent(old)->rb_right = node; + } else + root->rb_node = node; + + rb_set_parent(old->rb_left, node); + if (old->rb_right) + rb_set_parent(old->rb_right, node); + goto color; + } + + parent = rb_parent(node); + color = rb_color(node); + + if (child) + rb_set_parent(child, parent); + if (parent) + { + if (parent->rb_left == node) + parent->rb_left = child; + else + parent->rb_right = child; + } + else + root->rb_node = child; + + color: + if (color == RB_BLACK) + __rb_erase_color(child, parent, root); +} + +/* + * This function returns the first node (in sort order) of the tree. + */ +struct rb_node *rb_first(const struct rb_root *root) +{ + struct rb_node *n; + + n = root->rb_node; + if (!n) + return NULL; + while (n->rb_left) + n = n->rb_left; + return n; +} + +struct rb_node *rb_last(const struct rb_root *root) +{ + struct rb_node *n; + + n = root->rb_node; + if (!n) + return NULL; + while (n->rb_right) + n = n->rb_right; + return n; +} + +struct rb_node *rb_next(const struct rb_node *node) +{ + struct rb_node *parent; + + if (rb_parent(node) == node) + return NULL; + + /* If we have a right-hand child, go down and then left as far + as we can. */ + if (node->rb_right) { + node = node->rb_right; + while (node->rb_left) + node=node->rb_left; + return (struct rb_node *)node; + } + + /* No right-hand children. Everything down and left is + smaller than us, so any 'next' node must be in the general + direction of our parent. Go up the tree; any time the + ancestor is a right-hand child of its parent, keep going + up. First time it's a left-hand child of its parent, said + parent is our 'next' node. */ + while ((parent = rb_parent(node)) && node == parent->rb_right) + node = parent; + + return parent; +} + +struct rb_node *rb_prev(const struct rb_node *node) +{ + struct rb_node *parent; + + if (rb_parent(node) == node) + return NULL; + + /* If we have a left-hand child, go down and then right as far + as we can. */ + if (node->rb_left) { + node = node->rb_left; + while (node->rb_right) + node=node->rb_right; + return (struct rb_node *)node; + } + + /* No left-hand children. Go up till we find an ancestor which + is a right-hand child of its parent */ + while ((parent = rb_parent(node)) && node == parent->rb_left) + node = parent; + + return parent; +} + +void rb_replace_node(struct rb_node *victim, struct rb_node *new, + struct rb_root *root) +{ + struct rb_node *parent = rb_parent(victim); + + /* Set the surrounding nodes to point to the replacement */ + if (parent) { + if (victim == parent->rb_left) + parent->rb_left = new; + else + parent->rb_right = new; + } else { + root->rb_node = new; + } + if (victim->rb_left) + rb_set_parent(victim->rb_left, new); + if (victim->rb_right) + rb_set_parent(victim->rb_right, new); + + /* Copy the pointers/colour from the victim to the replacement */ + *new = *victim; +} diff --git a/trunk/tools/perf/util/rbtree.h b/trunk/tools/perf/util/rbtree.h new file mode 100644 index 000000000000..6bdc488a47fb --- /dev/null +++ b/trunk/tools/perf/util/rbtree.h @@ -0,0 +1,171 @@ +/* + Red Black Trees + (C) 1999 Andrea Arcangeli + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + linux/include/linux/rbtree.h + + To use rbtrees you'll have to implement your own insert and search cores. + This will avoid us to use callbacks and to drop drammatically performances. + I know it's not the cleaner way, but in C (not in C++) to get + performances and genericity... + + Some example of insert and search follows here. The search is a plain + normal search over an ordered tree. The insert instead must be implemented + int two steps: as first thing the code must insert the element in + order as a red leaf in the tree, then the support library function + rb_insert_color() must be called. Such function will do the + not trivial work to rebalance the rbtree if necessary. + +----------------------------------------------------------------------- +static inline struct page * rb_search_page_cache(struct inode * inode, + unsigned long offset) +{ + struct rb_node * n = inode->i_rb_page_cache.rb_node; + struct page * page; + + while (n) + { + page = rb_entry(n, struct page, rb_page_cache); + + if (offset < page->offset) + n = n->rb_left; + else if (offset > page->offset) + n = n->rb_right; + else + return page; + } + return NULL; +} + +static inline struct page * __rb_insert_page_cache(struct inode * inode, + unsigned long offset, + struct rb_node * node) +{ + struct rb_node ** p = &inode->i_rb_page_cache.rb_node; + struct rb_node * parent = NULL; + struct page * page; + + while (*p) + { + parent = *p; + page = rb_entry(parent, struct page, rb_page_cache); + + if (offset < page->offset) + p = &(*p)->rb_left; + else if (offset > page->offset) + p = &(*p)->rb_right; + else + return page; + } + + rb_link_node(node, parent, p); + + return NULL; +} + +static inline struct page * rb_insert_page_cache(struct inode * inode, + unsigned long offset, + struct rb_node * node) +{ + struct page * ret; + if ((ret = __rb_insert_page_cache(inode, offset, node))) + goto out; + rb_insert_color(node, &inode->i_rb_page_cache); + out: + return ret; +} +----------------------------------------------------------------------- +*/ + +#ifndef _LINUX_RBTREE_H +#define _LINUX_RBTREE_H + +#include + +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + +struct rb_node +{ + unsigned long rb_parent_color; +#define RB_RED 0 +#define RB_BLACK 1 + struct rb_node *rb_right; + struct rb_node *rb_left; +} __attribute__((aligned(sizeof(long)))); + /* The alignment might seem pointless, but allegedly CRIS needs it */ + +struct rb_root +{ + struct rb_node *rb_node; +}; + + +#define rb_parent(r) ((struct rb_node *)((r)->rb_parent_color & ~3)) +#define rb_color(r) ((r)->rb_parent_color & 1) +#define rb_is_red(r) (!rb_color(r)) +#define rb_is_black(r) rb_color(r) +#define rb_set_red(r) do { (r)->rb_parent_color &= ~1; } while (0) +#define rb_set_black(r) do { (r)->rb_parent_color |= 1; } while (0) + +static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p) +{ + rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p; +} +static inline void rb_set_color(struct rb_node *rb, int color) +{ + rb->rb_parent_color = (rb->rb_parent_color & ~1) | color; +} + +#define RB_ROOT (struct rb_root) { NULL, } +#define rb_entry(ptr, type, member) container_of(ptr, type, member) + +#define RB_EMPTY_ROOT(root) ((root)->rb_node == NULL) +#define RB_EMPTY_NODE(node) (rb_parent(node) == node) +#define RB_CLEAR_NODE(node) (rb_set_parent(node, node)) + +extern void rb_insert_color(struct rb_node *, struct rb_root *); +extern void rb_erase(struct rb_node *, struct rb_root *); + +/* Find logical next and previous nodes in a tree */ +extern struct rb_node *rb_next(const struct rb_node *); +extern struct rb_node *rb_prev(const struct rb_node *); +extern struct rb_node *rb_first(const struct rb_root *); +extern struct rb_node *rb_last(const struct rb_root *); + +/* Fast replacement of a single node without remove/rebalance/add/rebalance */ +extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, + struct rb_root *root); + +static inline void rb_link_node(struct rb_node * node, struct rb_node * parent, + struct rb_node ** rb_link) +{ + node->rb_parent_color = (unsigned long )parent; + node->rb_left = node->rb_right = NULL; + + *rb_link = node; +} + +#endif /* _LINUX_RBTREE_H */ diff --git a/trunk/tools/perf/util/run-command.c b/trunk/tools/perf/util/run-command.c new file mode 100644 index 000000000000..b2f5e854f40a --- /dev/null +++ b/trunk/tools/perf/util/run-command.c @@ -0,0 +1,395 @@ +#include "cache.h" +#include "run-command.h" +#include "exec_cmd.h" + +static inline void close_pair(int fd[2]) +{ + close(fd[0]); + close(fd[1]); +} + +static inline void dup_devnull(int to) +{ + int fd = open("/dev/null", O_RDWR); + dup2(fd, to); + close(fd); +} + +int start_command(struct child_process *cmd) +{ + int need_in, need_out, need_err; + int fdin[2], fdout[2], fderr[2]; + + /* + * In case of errors we must keep the promise to close FDs + * that have been passed in via ->in and ->out. + */ + + need_in = !cmd->no_stdin && cmd->in < 0; + if (need_in) { + if (pipe(fdin) < 0) { + if (cmd->out > 0) + close(cmd->out); + return -ERR_RUN_COMMAND_PIPE; + } + cmd->in = fdin[1]; + } + + need_out = !cmd->no_stdout + && !cmd->stdout_to_stderr + && cmd->out < 0; + if (need_out) { + if (pipe(fdout) < 0) { + if (need_in) + close_pair(fdin); + else if (cmd->in) + close(cmd->in); + return -ERR_RUN_COMMAND_PIPE; + } + cmd->out = fdout[0]; + } + + need_err = !cmd->no_stderr && cmd->err < 0; + if (need_err) { + if (pipe(fderr) < 0) { + if (need_in) + close_pair(fdin); + else if (cmd->in) + close(cmd->in); + if (need_out) + close_pair(fdout); + else if (cmd->out) + close(cmd->out); + return -ERR_RUN_COMMAND_PIPE; + } + cmd->err = fderr[0]; + } + +#ifndef __MINGW32__ + fflush(NULL); + cmd->pid = fork(); + if (!cmd->pid) { + if (cmd->no_stdin) + dup_devnull(0); + else if (need_in) { + dup2(fdin[0], 0); + close_pair(fdin); + } else if (cmd->in) { + dup2(cmd->in, 0); + close(cmd->in); + } + + if (cmd->no_stderr) + dup_devnull(2); + else if (need_err) { + dup2(fderr[1], 2); + close_pair(fderr); + } + + if (cmd->no_stdout) + dup_devnull(1); + else if (cmd->stdout_to_stderr) + dup2(2, 1); + else if (need_out) { + dup2(fdout[1], 1); + close_pair(fdout); + } else if (cmd->out > 1) { + dup2(cmd->out, 1); + close(cmd->out); + } + + if (cmd->dir && chdir(cmd->dir)) + die("exec %s: cd to %s failed (%s)", cmd->argv[0], + cmd->dir, strerror(errno)); + if (cmd->env) { + for (; *cmd->env; cmd->env++) { + if (strchr(*cmd->env, '=')) + putenv((char*)*cmd->env); + else + unsetenv(*cmd->env); + } + } + if (cmd->preexec_cb) + cmd->preexec_cb(); + if (cmd->perf_cmd) { + execv_perf_cmd(cmd->argv); + } else { + execvp(cmd->argv[0], (char *const*) cmd->argv); + } + exit(127); + } +#else + int s0 = -1, s1 = -1, s2 = -1; /* backups of stdin, stdout, stderr */ + const char **sargv = cmd->argv; + char **env = environ; + + if (cmd->no_stdin) { + s0 = dup(0); + dup_devnull(0); + } else if (need_in) { + s0 = dup(0); + dup2(fdin[0], 0); + } else if (cmd->in) { + s0 = dup(0); + dup2(cmd->in, 0); + } + + if (cmd->no_stderr) { + s2 = dup(2); + dup_devnull(2); + } else if (need_err) { + s2 = dup(2); + dup2(fderr[1], 2); + } + + if (cmd->no_stdout) { + s1 = dup(1); + dup_devnull(1); + } else if (cmd->stdout_to_stderr) { + s1 = dup(1); + dup2(2, 1); + } else if (need_out) { + s1 = dup(1); + dup2(fdout[1], 1); + } else if (cmd->out > 1) { + s1 = dup(1); + dup2(cmd->out, 1); + } + + if (cmd->dir) + die("chdir in start_command() not implemented"); + if (cmd->env) { + env = copy_environ(); + for (; *cmd->env; cmd->env++) + env = env_setenv(env, *cmd->env); + } + + if (cmd->perf_cmd) { + cmd->argv = prepare_perf_cmd(cmd->argv); + } + + cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env); + + if (cmd->env) + free_environ(env); + if (cmd->perf_cmd) + free(cmd->argv); + + cmd->argv = sargv; + if (s0 >= 0) + dup2(s0, 0), close(s0); + if (s1 >= 0) + dup2(s1, 1), close(s1); + if (s2 >= 0) + dup2(s2, 2), close(s2); +#endif + + if (cmd->pid < 0) { + int err = errno; + if (need_in) + close_pair(fdin); + else if (cmd->in) + close(cmd->in); + if (need_out) + close_pair(fdout); + else if (cmd->out) + close(cmd->out); + if (need_err) + close_pair(fderr); + return err == ENOENT ? + -ERR_RUN_COMMAND_EXEC : + -ERR_RUN_COMMAND_FORK; + } + + if (need_in) + close(fdin[0]); + else if (cmd->in) + close(cmd->in); + + if (need_out) + close(fdout[1]); + else if (cmd->out) + close(cmd->out); + + if (need_err) + close(fderr[1]); + + return 0; +} + +static int wait_or_whine(pid_t pid) +{ + for (;;) { + int status, code; + pid_t waiting = waitpid(pid, &status, 0); + + if (waiting < 0) { + if (errno == EINTR) + continue; + error("waitpid failed (%s)", strerror(errno)); + return -ERR_RUN_COMMAND_WAITPID; + } + if (waiting != pid) + return -ERR_RUN_COMMAND_WAITPID_WRONG_PID; + if (WIFSIGNALED(status)) + return -ERR_RUN_COMMAND_WAITPID_SIGNAL; + + if (!WIFEXITED(status)) + return -ERR_RUN_COMMAND_WAITPID_NOEXIT; + code = WEXITSTATUS(status); + switch (code) { + case 127: + return -ERR_RUN_COMMAND_EXEC; + case 0: + return 0; + default: + return -code; + } + } +} + +int finish_command(struct child_process *cmd) +{ + return wait_or_whine(cmd->pid); +} + +int run_command(struct child_process *cmd) +{ + int code = start_command(cmd); + if (code) + return code; + return finish_command(cmd); +} + +static void prepare_run_command_v_opt(struct child_process *cmd, + const char **argv, + int opt) +{ + memset(cmd, 0, sizeof(*cmd)); + cmd->argv = argv; + cmd->no_stdin = opt & RUN_COMMAND_NO_STDIN ? 1 : 0; + cmd->perf_cmd = opt & RUN_PERF_CMD ? 1 : 0; + cmd->stdout_to_stderr = opt & RUN_COMMAND_STDOUT_TO_STDERR ? 1 : 0; +} + +int run_command_v_opt(const char **argv, int opt) +{ + struct child_process cmd; + prepare_run_command_v_opt(&cmd, argv, opt); + return run_command(&cmd); +} + +int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env) +{ + struct child_process cmd; + prepare_run_command_v_opt(&cmd, argv, opt); + cmd.dir = dir; + cmd.env = env; + return run_command(&cmd); +} + +#ifdef __MINGW32__ +static __stdcall unsigned run_thread(void *data) +{ + struct async *async = data; + return async->proc(async->fd_for_proc, async->data); +} +#endif + +int start_async(struct async *async) +{ + int pipe_out[2]; + + if (pipe(pipe_out) < 0) + return error("cannot create pipe: %s", strerror(errno)); + async->out = pipe_out[0]; + +#ifndef __MINGW32__ + /* Flush stdio before fork() to avoid cloning buffers */ + fflush(NULL); + + async->pid = fork(); + if (async->pid < 0) { + error("fork (async) failed: %s", strerror(errno)); + close_pair(pipe_out); + return -1; + } + if (!async->pid) { + close(pipe_out[0]); + exit(!!async->proc(pipe_out[1], async->data)); + } + close(pipe_out[1]); +#else + async->fd_for_proc = pipe_out[1]; + async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL); + if (!async->tid) { + error("cannot create thread: %s", strerror(errno)); + close_pair(pipe_out); + return -1; + } +#endif + return 0; +} + +int finish_async(struct async *async) +{ +#ifndef __MINGW32__ + int ret = 0; + + if (wait_or_whine(async->pid)) + ret = error("waitpid (async) failed"); +#else + DWORD ret = 0; + if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0) + ret = error("waiting for thread failed: %lu", GetLastError()); + else if (!GetExitCodeThread(async->tid, &ret)) + ret = error("cannot get thread exit code: %lu", GetLastError()); + CloseHandle(async->tid); +#endif + return ret; +} + +int run_hook(const char *index_file, const char *name, ...) +{ + struct child_process hook; + const char **argv = NULL, *env[2]; + char index[PATH_MAX]; + va_list args; + int ret; + size_t i = 0, alloc = 0; + + if (access(perf_path("hooks/%s", name), X_OK) < 0) + return 0; + + va_start(args, name); + ALLOC_GROW(argv, i + 1, alloc); + argv[i++] = perf_path("hooks/%s", name); + while (argv[i-1]) { + ALLOC_GROW(argv, i + 1, alloc); + argv[i++] = va_arg(args, const char *); + } + va_end(args); + + memset(&hook, 0, sizeof(hook)); + hook.argv = argv; + hook.no_stdin = 1; + hook.stdout_to_stderr = 1; + if (index_file) { + snprintf(index, sizeof(index), "PERF_INDEX_FILE=%s", index_file); + env[0] = index; + env[1] = NULL; + hook.env = env; + } + + ret = start_command(&hook); + free(argv); + if (ret) { + warning("Could not spawn %s", argv[0]); + return ret; + } + ret = finish_command(&hook); + if (ret == -ERR_RUN_COMMAND_WAITPID_SIGNAL) + warning("%s exited due to uncaught signal", argv[0]); + + return ret; +} diff --git a/trunk/tools/perf/util/run-command.h b/trunk/tools/perf/util/run-command.h new file mode 100644 index 000000000000..328289f23669 --- /dev/null +++ b/trunk/tools/perf/util/run-command.h @@ -0,0 +1,93 @@ +#ifndef RUN_COMMAND_H +#define RUN_COMMAND_H + +enum { + ERR_RUN_COMMAND_FORK = 10000, + ERR_RUN_COMMAND_EXEC, + ERR_RUN_COMMAND_PIPE, + ERR_RUN_COMMAND_WAITPID, + ERR_RUN_COMMAND_WAITPID_WRONG_PID, + ERR_RUN_COMMAND_WAITPID_SIGNAL, + ERR_RUN_COMMAND_WAITPID_NOEXIT, +}; +#define IS_RUN_COMMAND_ERR(x) (-(x) >= ERR_RUN_COMMAND_FORK) + +struct child_process { + const char **argv; + pid_t pid; + /* + * Using .in, .out, .err: + * - Specify 0 for no redirections (child inherits stdin, stdout, + * stderr from parent). + * - Specify -1 to have a pipe allocated as follows: + * .in: returns the writable pipe end; parent writes to it, + * the readable pipe end becomes child's stdin + * .out, .err: returns the readable pipe end; parent reads from + * it, the writable pipe end becomes child's stdout/stderr + * The caller of start_command() must close the returned FDs + * after it has completed reading from/writing to it! + * - Specify > 0 to set a channel to a particular FD as follows: + * .in: a readable FD, becomes child's stdin + * .out: a writable FD, becomes child's stdout/stderr + * .err > 0 not supported + * The specified FD is closed by start_command(), even in case + * of errors! + */ + int in; + int out; + int err; + const char *dir; + const char *const *env; + unsigned no_stdin:1; + unsigned no_stdout:1; + unsigned no_stderr:1; + unsigned perf_cmd:1; /* if this is to be perf sub-command */ + unsigned stdout_to_stderr:1; + void (*preexec_cb)(void); +}; + +int start_command(struct child_process *); +int finish_command(struct child_process *); +int run_command(struct child_process *); + +extern int run_hook(const char *index_file, const char *name, ...); + +#define RUN_COMMAND_NO_STDIN 1 +#define RUN_PERF_CMD 2 /*If this is to be perf sub-command */ +#define RUN_COMMAND_STDOUT_TO_STDERR 4 +int run_command_v_opt(const char **argv, int opt); + +/* + * env (the environment) is to be formatted like environ: "VAR=VALUE". + * To unset an environment variable use just "VAR". + */ +int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env); + +/* + * The purpose of the following functions is to feed a pipe by running + * a function asynchronously and providing output that the caller reads. + * + * It is expected that no synchronization and mutual exclusion between + * the caller and the feed function is necessary so that the function + * can run in a thread without interfering with the caller. + */ +struct async { + /* + * proc writes to fd and closes it; + * returns 0 on success, non-zero on failure + */ + int (*proc)(int fd, void *data); + void *data; + int out; /* caller reads from here and closes it */ +#ifndef __MINGW32__ + pid_t pid; +#else + HANDLE tid; + int fd_for_proc; +#endif +}; + +int start_async(struct async *async); +int finish_async(struct async *async); + +#endif diff --git a/trunk/tools/perf/util/sigchain.c b/trunk/tools/perf/util/sigchain.c new file mode 100644 index 000000000000..1118b99e57d3 --- /dev/null +++ b/trunk/tools/perf/util/sigchain.c @@ -0,0 +1,52 @@ +#include "sigchain.h" +#include "cache.h" + +#define SIGCHAIN_MAX_SIGNALS 32 + +struct sigchain_signal { + sigchain_fun *old; + int n; + int alloc; +}; +static struct sigchain_signal signals[SIGCHAIN_MAX_SIGNALS]; + +static void check_signum(int sig) +{ + if (sig < 1 || sig >= SIGCHAIN_MAX_SIGNALS) + die("BUG: signal out of range: %d", sig); +} + +int sigchain_push(int sig, sigchain_fun f) +{ + struct sigchain_signal *s = signals + sig; + check_signum(sig); + + ALLOC_GROW(s->old, s->n + 1, s->alloc); + s->old[s->n] = signal(sig, f); + if (s->old[s->n] == SIG_ERR) + return -1; + s->n++; + return 0; +} + +int sigchain_pop(int sig) +{ + struct sigchain_signal *s = signals + sig; + check_signum(sig); + if (s->n < 1) + return 0; + + if (signal(sig, s->old[s->n - 1]) == SIG_ERR) + return -1; + s->n--; + return 0; +} + +void sigchain_push_common(sigchain_fun f) +{ + sigchain_push(SIGINT, f); + sigchain_push(SIGHUP, f); + sigchain_push(SIGTERM, f); + sigchain_push(SIGQUIT, f); + sigchain_push(SIGPIPE, f); +} diff --git a/trunk/tools/perf/util/sigchain.h b/trunk/tools/perf/util/sigchain.h new file mode 100644 index 000000000000..618083bce0c6 --- /dev/null +++ b/trunk/tools/perf/util/sigchain.h @@ -0,0 +1,11 @@ +#ifndef SIGCHAIN_H +#define SIGCHAIN_H + +typedef void (*sigchain_fun)(int); + +int sigchain_push(int sig, sigchain_fun f); +int sigchain_pop(int sig); + +void sigchain_push_common(sigchain_fun f); + +#endif /* SIGCHAIN_H */ diff --git a/trunk/tools/perf/util/strbuf.c b/trunk/tools/perf/util/strbuf.c new file mode 100644 index 000000000000..eaba09306802 --- /dev/null +++ b/trunk/tools/perf/util/strbuf.c @@ -0,0 +1,359 @@ +#include "cache.h" + +int prefixcmp(const char *str, const char *prefix) +{ + for (; ; str++, prefix++) + if (!*prefix) + return 0; + else if (*str != *prefix) + return (unsigned char)*prefix - (unsigned char)*str; +} + +/* + * Used as the default ->buf value, so that people can always assume + * buf is non NULL and ->buf is NUL terminated even for a freshly + * initialized strbuf. + */ +char strbuf_slopbuf[1]; + +void strbuf_init(struct strbuf *sb, size_t hint) +{ + sb->alloc = sb->len = 0; + sb->buf = strbuf_slopbuf; + if (hint) + strbuf_grow(sb, hint); +} + +void strbuf_release(struct strbuf *sb) +{ + if (sb->alloc) { + free(sb->buf); + strbuf_init(sb, 0); + } +} + +char *strbuf_detach(struct strbuf *sb, size_t *sz) +{ + char *res = sb->alloc ? sb->buf : NULL; + if (sz) + *sz = sb->len; + strbuf_init(sb, 0); + return res; +} + +void strbuf_attach(struct strbuf *sb, void *buf, size_t len, size_t alloc) +{ + strbuf_release(sb); + sb->buf = buf; + sb->len = len; + sb->alloc = alloc; + strbuf_grow(sb, 0); + sb->buf[sb->len] = '\0'; +} + +void strbuf_grow(struct strbuf *sb, size_t extra) +{ + if (sb->len + extra + 1 <= sb->len) + die("you want to use way too much memory"); + if (!sb->alloc) + sb->buf = NULL; + ALLOC_GROW(sb->buf, sb->len + extra + 1, sb->alloc); +} + +void strbuf_trim(struct strbuf *sb) +{ + char *b = sb->buf; + while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1])) + sb->len--; + while (sb->len > 0 && isspace(*b)) { + b++; + sb->len--; + } + memmove(sb->buf, b, sb->len); + sb->buf[sb->len] = '\0'; +} +void strbuf_rtrim(struct strbuf *sb) +{ + while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1])) + sb->len--; + sb->buf[sb->len] = '\0'; +} + +void strbuf_ltrim(struct strbuf *sb) +{ + char *b = sb->buf; + while (sb->len > 0 && isspace(*b)) { + b++; + sb->len--; + } + memmove(sb->buf, b, sb->len); + sb->buf[sb->len] = '\0'; +} + +void strbuf_tolower(struct strbuf *sb) +{ + int i; + for (i = 0; i < sb->len; i++) + sb->buf[i] = tolower(sb->buf[i]); +} + +struct strbuf **strbuf_split(const struct strbuf *sb, int delim) +{ + int alloc = 2, pos = 0; + char *n, *p; + struct strbuf **ret; + struct strbuf *t; + + ret = calloc(alloc, sizeof(struct strbuf *)); + p = n = sb->buf; + while (n < sb->buf + sb->len) { + int len; + n = memchr(n, delim, sb->len - (n - sb->buf)); + if (pos + 1 >= alloc) { + alloc = alloc * 2; + ret = realloc(ret, sizeof(struct strbuf *) * alloc); + } + if (!n) + n = sb->buf + sb->len - 1; + len = n - p + 1; + t = malloc(sizeof(struct strbuf)); + strbuf_init(t, len); + strbuf_add(t, p, len); + ret[pos] = t; + ret[++pos] = NULL; + p = ++n; + } + return ret; +} + +void strbuf_list_free(struct strbuf **sbs) +{ + struct strbuf **s = sbs; + + while (*s) { + strbuf_release(*s); + free(*s++); + } + free(sbs); +} + +int strbuf_cmp(const struct strbuf *a, const struct strbuf *b) +{ + int len = a->len < b->len ? a->len: b->len; + int cmp = memcmp(a->buf, b->buf, len); + if (cmp) + return cmp; + return a->len < b->len ? -1: a->len != b->len; +} + +void strbuf_splice(struct strbuf *sb, size_t pos, size_t len, + const void *data, size_t dlen) +{ + if (pos + len < pos) + die("you want to use way too much memory"); + if (pos > sb->len) + die("`pos' is too far after the end of the buffer"); + if (pos + len > sb->len) + die("`pos + len' is too far after the end of the buffer"); + + if (dlen >= len) + strbuf_grow(sb, dlen - len); + memmove(sb->buf + pos + dlen, + sb->buf + pos + len, + sb->len - pos - len); + memcpy(sb->buf + pos, data, dlen); + strbuf_setlen(sb, sb->len + dlen - len); +} + +void strbuf_insert(struct strbuf *sb, size_t pos, const void *data, size_t len) +{ + strbuf_splice(sb, pos, 0, data, len); +} + +void strbuf_remove(struct strbuf *sb, size_t pos, size_t len) +{ + strbuf_splice(sb, pos, len, NULL, 0); +} + +void strbuf_add(struct strbuf *sb, const void *data, size_t len) +{ + strbuf_grow(sb, len); + memcpy(sb->buf + sb->len, data, len); + strbuf_setlen(sb, sb->len + len); +} + +void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len) +{ + strbuf_grow(sb, len); + memcpy(sb->buf + sb->len, sb->buf + pos, len); + strbuf_setlen(sb, sb->len + len); +} + +void strbuf_addf(struct strbuf *sb, const char *fmt, ...) +{ + int len; + va_list ap; + + if (!strbuf_avail(sb)) + strbuf_grow(sb, 64); + va_start(ap, fmt); + len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); + va_end(ap); + if (len < 0) + die("your vsnprintf is broken"); + if (len > strbuf_avail(sb)) { + strbuf_grow(sb, len); + va_start(ap, fmt); + len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); + va_end(ap); + if (len > strbuf_avail(sb)) { + die("this should not happen, your snprintf is broken"); + } + } + strbuf_setlen(sb, sb->len + len); +} + +void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn, + void *context) +{ + for (;;) { + const char *percent; + size_t consumed; + + percent = strchrnul(format, '%'); + strbuf_add(sb, format, percent - format); + if (!*percent) + break; + format = percent + 1; + + consumed = fn(sb, format, context); + if (consumed) + format += consumed; + else + strbuf_addch(sb, '%'); + } +} + +size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder, + void *context) +{ + struct strbuf_expand_dict_entry *e = context; + size_t len; + + for (; e->placeholder && (len = strlen(e->placeholder)); e++) { + if (!strncmp(placeholder, e->placeholder, len)) { + if (e->value) + strbuf_addstr(sb, e->value); + return len; + } + } + return 0; +} + +size_t strbuf_fread(struct strbuf *sb, size_t size, FILE *f) +{ + size_t res; + size_t oldalloc = sb->alloc; + + strbuf_grow(sb, size); + res = fread(sb->buf + sb->len, 1, size, f); + if (res > 0) + strbuf_setlen(sb, sb->len + res); + else if (res < 0 && oldalloc == 0) + strbuf_release(sb); + return res; +} + +ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint) +{ + size_t oldlen = sb->len; + size_t oldalloc = sb->alloc; + + strbuf_grow(sb, hint ? hint : 8192); + for (;;) { + ssize_t cnt; + + cnt = read(fd, sb->buf + sb->len, sb->alloc - sb->len - 1); + if (cnt < 0) { + if (oldalloc == 0) + strbuf_release(sb); + else + strbuf_setlen(sb, oldlen); + return -1; + } + if (!cnt) + break; + sb->len += cnt; + strbuf_grow(sb, 8192); + } + + sb->buf[sb->len] = '\0'; + return sb->len - oldlen; +} + +#define STRBUF_MAXLINK (2*PATH_MAX) + +int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint) +{ + size_t oldalloc = sb->alloc; + + if (hint < 32) + hint = 32; + + while (hint < STRBUF_MAXLINK) { + int len; + + strbuf_grow(sb, hint); + len = readlink(path, sb->buf, hint); + if (len < 0) { + if (errno != ERANGE) + break; + } else if (len < hint) { + strbuf_setlen(sb, len); + return 0; + } + + /* .. the buffer was too small - try again */ + hint *= 2; + } + if (oldalloc == 0) + strbuf_release(sb); + return -1; +} + +int strbuf_getline(struct strbuf *sb, FILE *fp, int term) +{ + int ch; + + strbuf_grow(sb, 0); + if (feof(fp)) + return EOF; + + strbuf_reset(sb); + while ((ch = fgetc(fp)) != EOF) { + if (ch == term) + break; + strbuf_grow(sb, 1); + sb->buf[sb->len++] = ch; + } + if (ch == EOF && sb->len == 0) + return EOF; + + sb->buf[sb->len] = '\0'; + return 0; +} + +int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint) +{ + int fd, len; + + fd = open(path, O_RDONLY); + if (fd < 0) + return -1; + len = strbuf_read(sb, fd, hint); + close(fd); + if (len < 0) + return -1; + + return len; +} diff --git a/trunk/tools/perf/util/strbuf.h b/trunk/tools/perf/util/strbuf.h new file mode 100644 index 000000000000..9ee908a3ec5d --- /dev/null +++ b/trunk/tools/perf/util/strbuf.h @@ -0,0 +1,137 @@ +#ifndef STRBUF_H +#define STRBUF_H + +/* + * Strbuf's can be use in many ways: as a byte array, or to store arbitrary + * long, overflow safe strings. + * + * Strbufs has some invariants that are very important to keep in mind: + * + * 1. the ->buf member is always malloc-ed, hence strbuf's can be used to + * build complex strings/buffers whose final size isn't easily known. + * + * It is NOT legal to copy the ->buf pointer away. + * `strbuf_detach' is the operation that detachs a buffer from its shell + * while keeping the shell valid wrt its invariants. + * + * 2. the ->buf member is a byte array that has at least ->len + 1 bytes + * allocated. The extra byte is used to store a '\0', allowing the ->buf + * member to be a valid C-string. Every strbuf function ensure this + * invariant is preserved. + * + * Note that it is OK to "play" with the buffer directly if you work it + * that way: + * + * strbuf_grow(sb, SOME_SIZE); + * ... Here, the memory array starting at sb->buf, and of length + * ... strbuf_avail(sb) is all yours, and you are sure that + * ... strbuf_avail(sb) is at least SOME_SIZE. + * strbuf_setlen(sb, sb->len + SOME_OTHER_SIZE); + * + * Of course, SOME_OTHER_SIZE must be smaller or equal to strbuf_avail(sb). + * + * Doing so is safe, though if it has to be done in many places, adding the + * missing API to the strbuf module is the way to go. + * + * XXX: do _not_ assume that the area that is yours is of size ->alloc - 1 + * even if it's true in the current implementation. Alloc is somehow a + * "private" member that should not be messed with. + */ + +#include + +extern char strbuf_slopbuf[]; +struct strbuf { + size_t alloc; + size_t len; + char *buf; +}; + +#define STRBUF_INIT { 0, 0, strbuf_slopbuf } + +/*----- strbuf life cycle -----*/ +extern void strbuf_init(struct strbuf *, size_t); +extern void strbuf_release(struct strbuf *); +extern char *strbuf_detach(struct strbuf *, size_t *); +extern void strbuf_attach(struct strbuf *, void *, size_t, size_t); +static inline void strbuf_swap(struct strbuf *a, struct strbuf *b) { + struct strbuf tmp = *a; + *a = *b; + *b = tmp; +} + +/*----- strbuf size related -----*/ +static inline size_t strbuf_avail(const struct strbuf *sb) { + return sb->alloc ? sb->alloc - sb->len - 1 : 0; +} + +extern void strbuf_grow(struct strbuf *, size_t); + +static inline void strbuf_setlen(struct strbuf *sb, size_t len) { + if (!sb->alloc) + strbuf_grow(sb, 0); + assert(len < sb->alloc); + sb->len = len; + sb->buf[len] = '\0'; +} +#define strbuf_reset(sb) strbuf_setlen(sb, 0) + +/*----- content related -----*/ +extern void strbuf_trim(struct strbuf *); +extern void strbuf_rtrim(struct strbuf *); +extern void strbuf_ltrim(struct strbuf *); +extern int strbuf_cmp(const struct strbuf *, const struct strbuf *); +extern void strbuf_tolower(struct strbuf *); + +extern struct strbuf **strbuf_split(const struct strbuf *, int delim); +extern void strbuf_list_free(struct strbuf **); + +/*----- add data in your buffer -----*/ +static inline void strbuf_addch(struct strbuf *sb, int c) { + strbuf_grow(sb, 1); + sb->buf[sb->len++] = c; + sb->buf[sb->len] = '\0'; +} + +extern void strbuf_insert(struct strbuf *, size_t pos, const void *, size_t); +extern void strbuf_remove(struct strbuf *, size_t pos, size_t len); + +/* splice pos..pos+len with given data */ +extern void strbuf_splice(struct strbuf *, size_t pos, size_t len, + const void *, size_t); + +extern void strbuf_add(struct strbuf *, const void *, size_t); +static inline void strbuf_addstr(struct strbuf *sb, const char *s) { + strbuf_add(sb, s, strlen(s)); +} +static inline void strbuf_addbuf(struct strbuf *sb, const struct strbuf *sb2) { + strbuf_add(sb, sb2->buf, sb2->len); +} +extern void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len); + +typedef size_t (*expand_fn_t) (struct strbuf *sb, const char *placeholder, void *context); +extern void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn, void *context); +struct strbuf_expand_dict_entry { + const char *placeholder; + const char *value; +}; +extern size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder, void *context); + +__attribute__((format(printf,2,3))) +extern void strbuf_addf(struct strbuf *sb, const char *fmt, ...); + +extern size_t strbuf_fread(struct strbuf *, size_t, FILE *); +/* XXX: if read fails, any partial read is undone */ +extern ssize_t strbuf_read(struct strbuf *, int fd, size_t hint); +extern int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint); +extern int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint); + +extern int strbuf_getline(struct strbuf *, FILE *, int); + +extern void stripspace(struct strbuf *buf, int skip_comments); +extern int launch_editor(const char *path, struct strbuf *buffer, const char *const *env); + +extern int strbuf_branchname(struct strbuf *sb, const char *name); +extern int strbuf_check_branch_ref(struct strbuf *sb, const char *name); + +#endif /* STRBUF_H */ diff --git a/trunk/tools/perf/util/string.c b/trunk/tools/perf/util/string.c new file mode 100644 index 000000000000..ec33c0c7f4e2 --- /dev/null +++ b/trunk/tools/perf/util/string.c @@ -0,0 +1,34 @@ +#include "string.h" + +static int hex(char ch) +{ + if ((ch >= '0') && (ch <= '9')) + return ch - '0'; + if ((ch >= 'a') && (ch <= 'f')) + return ch - 'a' + 10; + if ((ch >= 'A') && (ch <= 'F')) + return ch - 'A' + 10; + return -1; +} + +/* + * While we find nice hex chars, build a long_val. + * Return number of chars processed. + */ +int hex2u64(const char *ptr, __u64 *long_val) +{ + const char *p = ptr; + *long_val = 0; + + while (*p) { + const int hex_val = hex(*p); + + if (hex_val < 0) + break; + + *long_val = (*long_val << 4) | hex_val; + p++; + } + + return p - ptr; +} diff --git a/trunk/tools/perf/util/string.h b/trunk/tools/perf/util/string.h new file mode 100644 index 000000000000..72812c1c9a7a --- /dev/null +++ b/trunk/tools/perf/util/string.h @@ -0,0 +1,8 @@ +#ifndef _PERF_STRING_H_ +#define _PERF_STRING_H_ + +#include + +int hex2u64(const char *ptr, __u64 *val); + +#endif diff --git a/trunk/tools/perf/util/symbol.c b/trunk/tools/perf/util/symbol.c new file mode 100644 index 000000000000..49a55f813712 --- /dev/null +++ b/trunk/tools/perf/util/symbol.c @@ -0,0 +1,641 @@ +#include "util.h" +#include "../perf.h" +#include "string.h" +#include "symbol.h" + +#include +#include +#include + +const char *sym_hist_filter; + +static struct symbol *symbol__new(__u64 start, __u64 len, + const char *name, unsigned int priv_size, + __u64 obj_start, int verbose) +{ + size_t namelen = strlen(name) + 1; + struct symbol *self = calloc(1, priv_size + sizeof(*self) + namelen); + + if (!self) + return NULL; + + if (verbose >= 2) + printf("new symbol: %016Lx [%08lx]: %s, hist: %p, obj_start: %p\n", + (__u64)start, (unsigned long)len, name, self->hist, (void *)(unsigned long)obj_start); + + self->obj_start= obj_start; + self->hist = NULL; + self->hist_sum = 0; + + if (sym_hist_filter && !strcmp(name, sym_hist_filter)) + self->hist = calloc(sizeof(__u64), len); + + if (priv_size) { + memset(self, 0, priv_size); + self = ((void *)self) + priv_size; + } + self->start = start; + self->end = start + len - 1; + memcpy(self->name, name, namelen); + + return self; +} + +static void symbol__delete(struct symbol *self, unsigned int priv_size) +{ + free(((void *)self) - priv_size); +} + +static size_t symbol__fprintf(struct symbol *self, FILE *fp) +{ + return fprintf(fp, " %llx-%llx %s\n", + self->start, self->end, self->name); +} + +struct dso *dso__new(const char *name, unsigned int sym_priv_size) +{ + struct dso *self = malloc(sizeof(*self) + strlen(name) + 1); + + if (self != NULL) { + strcpy(self->name, name); + self->syms = RB_ROOT; + self->sym_priv_size = sym_priv_size; + self->find_symbol = dso__find_symbol; + } + + return self; +} + +static void dso__delete_symbols(struct dso *self) +{ + struct symbol *pos; + struct rb_node *next = rb_first(&self->syms); + + while (next) { + pos = rb_entry(next, struct symbol, rb_node); + next = rb_next(&pos->rb_node); + rb_erase(&pos->rb_node, &self->syms); + symbol__delete(pos, self->sym_priv_size); + } +} + +void dso__delete(struct dso *self) +{ + dso__delete_symbols(self); + free(self); +} + +static void dso__insert_symbol(struct dso *self, struct symbol *sym) +{ + struct rb_node **p = &self->syms.rb_node; + struct rb_node *parent = NULL; + const __u64 ip = sym->start; + struct symbol *s; + + while (*p != NULL) { + parent = *p; + s = rb_entry(parent, struct symbol, rb_node); + if (ip < s->start) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + rb_link_node(&sym->rb_node, parent, p); + rb_insert_color(&sym->rb_node, &self->syms); +} + +struct symbol *dso__find_symbol(struct dso *self, __u64 ip) +{ + struct rb_node *n; + + if (self == NULL) + return NULL; + + n = self->syms.rb_node; + + while (n) { + struct symbol *s = rb_entry(n, struct symbol, rb_node); + + if (ip < s->start) + n = n->rb_left; + else if (ip > s->end) + n = n->rb_right; + else + return s; + } + + return NULL; +} + +size_t dso__fprintf(struct dso *self, FILE *fp) +{ + size_t ret = fprintf(fp, "dso: %s\n", self->name); + + struct rb_node *nd; + for (nd = rb_first(&self->syms); nd; nd = rb_next(nd)) { + struct symbol *pos = rb_entry(nd, struct symbol, rb_node); + ret += symbol__fprintf(pos, fp); + } + + return ret; +} + +static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verbose) +{ + struct rb_node *nd, *prevnd; + char *line = NULL; + size_t n; + FILE *file = fopen("/proc/kallsyms", "r"); + + if (file == NULL) + goto out_failure; + + while (!feof(file)) { + __u64 start; + struct symbol *sym; + int line_len, len; + char symbol_type; + + line_len = getline(&line, &n, file); + if (line_len < 0) + break; + + if (!line) + goto out_failure; + + line[--line_len] = '\0'; /* \n */ + + len = hex2u64(line, &start); + + len++; + if (len + 2 >= line_len) + continue; + + symbol_type = toupper(line[len]); + /* + * We're interested only in code ('T'ext) + */ + if (symbol_type != 'T' && symbol_type != 'W') + continue; + /* + * Well fix up the end later, when we have all sorted. + */ + sym = symbol__new(start, 0xdead, line + len + 2, + self->sym_priv_size, 0, verbose); + + if (sym == NULL) + goto out_delete_line; + + if (filter && filter(self, sym)) + symbol__delete(sym, self->sym_priv_size); + else + dso__insert_symbol(self, sym); + } + + /* + * Now that we have all sorted out, just set the ->end of all + * symbols + */ + prevnd = rb_first(&self->syms); + + if (prevnd == NULL) + goto out_delete_line; + + for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) { + struct symbol *prev = rb_entry(prevnd, struct symbol, rb_node), + *curr = rb_entry(nd, struct symbol, rb_node); + + prev->end = curr->start - 1; + prevnd = nd; + } + + free(line); + fclose(file); + + return 0; + +out_delete_line: + free(line); +out_failure: + return -1; +} + +static int dso__load_perf_map(struct dso *self, symbol_filter_t filter, int verbose) +{ + char *line = NULL; + size_t n; + FILE *file; + int nr_syms = 0; + + file = fopen(self->name, "r"); + if (file == NULL) + goto out_failure; + + while (!feof(file)) { + __u64 start, size; + struct symbol *sym; + int line_len, len; + + line_len = getline(&line, &n, file); + if (line_len < 0) + break; + + if (!line) + goto out_failure; + + line[--line_len] = '\0'; /* \n */ + + len = hex2u64(line, &start); + + len++; + if (len + 2 >= line_len) + continue; + + len += hex2u64(line + len, &size); + + len++; + if (len + 2 >= line_len) + continue; + + sym = symbol__new(start, size, line + len, + self->sym_priv_size, start, verbose); + + if (sym == NULL) + goto out_delete_line; + + if (filter && filter(self, sym)) + symbol__delete(sym, self->sym_priv_size); + else { + dso__insert_symbol(self, sym); + nr_syms++; + } + } + + free(line); + fclose(file); + + return nr_syms; + +out_delete_line: + free(line); +out_failure: + return -1; +} + +/** + * elf_symtab__for_each_symbol - iterate thru all the symbols + * + * @self: struct elf_symtab instance to iterate + * @index: uint32_t index + * @sym: GElf_Sym iterator + */ +#define elf_symtab__for_each_symbol(syms, nr_syms, index, sym) \ + for (index = 0, gelf_getsym(syms, index, &sym);\ + index < nr_syms; \ + index++, gelf_getsym(syms, index, &sym)) + +static inline uint8_t elf_sym__type(const GElf_Sym *sym) +{ + return GELF_ST_TYPE(sym->st_info); +} + +static inline int elf_sym__is_function(const GElf_Sym *sym) +{ + return elf_sym__type(sym) == STT_FUNC && + sym->st_name != 0 && + sym->st_shndx != SHN_UNDEF && + sym->st_size != 0; +} + +static inline const char *elf_sym__name(const GElf_Sym *sym, + const Elf_Data *symstrs) +{ + return symstrs->d_buf + sym->st_name; +} + +static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep, + GElf_Shdr *shp, const char *name, + size_t *index) +{ + Elf_Scn *sec = NULL; + size_t cnt = 1; + + while ((sec = elf_nextscn(elf, sec)) != NULL) { + char *str; + + gelf_getshdr(sec, shp); + str = elf_strptr(elf, ep->e_shstrndx, shp->sh_name); + if (!strcmp(name, str)) { + if (index) + *index = cnt; + break; + } + ++cnt; + } + + return sec; +} + +#define elf_section__for_each_rel(reldata, pos, pos_mem, idx, nr_entries) \ + for (idx = 0, pos = gelf_getrel(reldata, 0, &pos_mem); \ + idx < nr_entries; \ + ++idx, pos = gelf_getrel(reldata, idx, &pos_mem)) + +#define elf_section__for_each_rela(reldata, pos, pos_mem, idx, nr_entries) \ + for (idx = 0, pos = gelf_getrela(reldata, 0, &pos_mem); \ + idx < nr_entries; \ + ++idx, pos = gelf_getrela(reldata, idx, &pos_mem)) + +static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf, + GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym, + GElf_Shdr *shdr_dynsym, + size_t dynsym_idx, int verbose) +{ + uint32_t nr_rel_entries, idx; + GElf_Sym sym; + __u64 plt_offset; + GElf_Shdr shdr_plt; + struct symbol *f; + GElf_Shdr shdr_rel_plt; + Elf_Data *reldata, *syms, *symstrs; + Elf_Scn *scn_plt_rel, *scn_symstrs; + char sympltname[1024]; + int nr = 0, symidx; + + scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt, + ".rela.plt", NULL); + if (scn_plt_rel == NULL) { + scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt, + ".rel.plt", NULL); + if (scn_plt_rel == NULL) + return 0; + } + + if (shdr_rel_plt.sh_link != dynsym_idx) + return 0; + + if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL) + return 0; + + /* + * Fetch the relocation section to find the indexes to the GOT + * and the symbols in the .dynsym they refer to. + */ + reldata = elf_getdata(scn_plt_rel, NULL); + if (reldata == NULL) + return -1; + + syms = elf_getdata(scn_dynsym, NULL); + if (syms == NULL) + return -1; + + scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link); + if (scn_symstrs == NULL) + return -1; + + symstrs = elf_getdata(scn_symstrs, NULL); + if (symstrs == NULL) + return -1; + + nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize; + plt_offset = shdr_plt.sh_offset; + + if (shdr_rel_plt.sh_type == SHT_RELA) { + GElf_Rela pos_mem, *pos; + + elf_section__for_each_rela(reldata, pos, pos_mem, idx, + nr_rel_entries) { + symidx = GELF_R_SYM(pos->r_info); + plt_offset += shdr_plt.sh_entsize; + gelf_getsym(syms, symidx, &sym); + snprintf(sympltname, sizeof(sympltname), + "%s@plt", elf_sym__name(&sym, symstrs)); + + f = symbol__new(plt_offset, shdr_plt.sh_entsize, + sympltname, self->sym_priv_size, 0, verbose); + if (!f) + return -1; + + dso__insert_symbol(self, f); + ++nr; + } + } else if (shdr_rel_plt.sh_type == SHT_REL) { + GElf_Rel pos_mem, *pos; + elf_section__for_each_rel(reldata, pos, pos_mem, idx, + nr_rel_entries) { + symidx = GELF_R_SYM(pos->r_info); + plt_offset += shdr_plt.sh_entsize; + gelf_getsym(syms, symidx, &sym); + snprintf(sympltname, sizeof(sympltname), + "%s@plt", elf_sym__name(&sym, symstrs)); + + f = symbol__new(plt_offset, shdr_plt.sh_entsize, + sympltname, self->sym_priv_size, 0, verbose); + if (!f) + return -1; + + dso__insert_symbol(self, f); + ++nr; + } + } else { + /* + * TODO: There are still one more shdr_rel_plt.sh_type + * I have to investigate, but probably should be ignored. + */ + } + + return nr; +} + +static int dso__load_sym(struct dso *self, int fd, const char *name, + symbol_filter_t filter, int verbose) +{ + Elf_Data *symstrs; + uint32_t nr_syms; + int err = -1; + uint32_t index; + GElf_Ehdr ehdr; + GElf_Shdr shdr; + Elf_Data *syms; + GElf_Sym sym; + Elf_Scn *sec, *sec_dynsym; + Elf *elf; + size_t dynsym_idx; + int nr = 0; + + elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + if (elf == NULL) { + if (verbose) + fprintf(stderr, "%s: cannot read %s ELF file.\n", + __func__, name); + goto out_close; + } + + if (gelf_getehdr(elf, &ehdr) == NULL) { + if (verbose) + fprintf(stderr, "%s: cannot get elf header.\n", __func__); + goto out_elf_end; + } + + /* + * We need to check if we have a .dynsym, so that we can handle the + * .plt, synthesizing its symbols, that aren't on the symtabs (be it + * .dynsym or .symtab) + */ + sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr, + ".dynsym", &dynsym_idx); + if (sec_dynsym != NULL) { + nr = dso__synthesize_plt_symbols(self, elf, &ehdr, + sec_dynsym, &shdr, + dynsym_idx, verbose); + if (nr < 0) + goto out_elf_end; + } + + /* + * But if we have a full .symtab (that is a superset of .dynsym) we + * should add the symbols not in the .dynsyn + */ + sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL); + if (sec == NULL) { + if (sec_dynsym == NULL) + goto out_elf_end; + + sec = sec_dynsym; + gelf_getshdr(sec, &shdr); + } + + syms = elf_getdata(sec, NULL); + if (syms == NULL) + goto out_elf_end; + + sec = elf_getscn(elf, shdr.sh_link); + if (sec == NULL) + goto out_elf_end; + + symstrs = elf_getdata(sec, NULL); + if (symstrs == NULL) + goto out_elf_end; + + nr_syms = shdr.sh_size / shdr.sh_entsize; + + memset(&sym, 0, sizeof(sym)); + + elf_symtab__for_each_symbol(syms, nr_syms, index, sym) { + struct symbol *f; + __u64 obj_start; + + if (!elf_sym__is_function(&sym)) + continue; + + sec = elf_getscn(elf, sym.st_shndx); + if (!sec) + goto out_elf_end; + + gelf_getshdr(sec, &shdr); + obj_start = sym.st_value; + + sym.st_value -= shdr.sh_addr - shdr.sh_offset; + + f = symbol__new(sym.st_value, sym.st_size, + elf_sym__name(&sym, symstrs), + self->sym_priv_size, obj_start, verbose); + if (!f) + goto out_elf_end; + + if (filter && filter(self, f)) + symbol__delete(f, self->sym_priv_size); + else { + dso__insert_symbol(self, f); + nr++; + } + } + + err = nr; +out_elf_end: + elf_end(elf); +out_close: + return err; +} + +int dso__load(struct dso *self, symbol_filter_t filter, int verbose) +{ + int size = strlen(self->name) + sizeof("/usr/lib/debug%s.debug"); + char *name = malloc(size); + int variant = 0; + int ret = -1; + int fd; + + if (!name) + return -1; + + if (strncmp(self->name, "/tmp/perf-", 10) == 0) + return dso__load_perf_map(self, filter, verbose); + +more: + do { + switch (variant) { + case 0: /* Fedora */ + snprintf(name, size, "/usr/lib/debug%s.debug", self->name); + break; + case 1: /* Ubuntu */ + snprintf(name, size, "/usr/lib/debug%s", self->name); + break; + case 2: /* Sane people */ + snprintf(name, size, "%s", self->name); + break; + + default: + goto out; + } + variant++; + + fd = open(name, O_RDONLY); + } while (fd < 0); + + ret = dso__load_sym(self, fd, name, filter, verbose); + close(fd); + + /* + * Some people seem to have debuginfo files _WITHOUT_ debug info!?!? + */ + if (!ret) + goto more; + +out: + free(name); + return ret; +} + +static int dso__load_vmlinux(struct dso *self, const char *vmlinux, + symbol_filter_t filter, int verbose) +{ + int err, fd = open(vmlinux, O_RDONLY); + + if (fd < 0) + return -1; + + err = dso__load_sym(self, fd, vmlinux, filter, verbose); + close(fd); + + return err; +} + +int dso__load_kernel(struct dso *self, const char *vmlinux, + symbol_filter_t filter, int verbose) +{ + int err = -1; + + if (vmlinux) + err = dso__load_vmlinux(self, vmlinux, filter, verbose); + + if (err) + err = dso__load_kallsyms(self, filter, verbose); + + return err; +} + +void symbol__init(void) +{ + elf_version(EV_CURRENT); +} diff --git a/trunk/tools/perf/util/symbol.h b/trunk/tools/perf/util/symbol.h new file mode 100644 index 000000000000..0d1292bd8270 --- /dev/null +++ b/trunk/tools/perf/util/symbol.h @@ -0,0 +1,47 @@ +#ifndef _PERF_SYMBOL_ +#define _PERF_SYMBOL_ 1 + +#include +#include "list.h" +#include "rbtree.h" + +struct symbol { + struct rb_node rb_node; + __u64 start; + __u64 end; + __u64 obj_start; + __u64 hist_sum; + __u64 *hist; + char name[0]; +}; + +struct dso { + struct list_head node; + struct rb_root syms; + unsigned int sym_priv_size; + struct symbol *(*find_symbol)(struct dso *, __u64 ip); + char name[0]; +}; + +const char *sym_hist_filter; + +typedef int (*symbol_filter_t)(struct dso *self, struct symbol *sym); + +struct dso *dso__new(const char *name, unsigned int sym_priv_size); +void dso__delete(struct dso *self); + +static inline void *dso__sym_priv(struct dso *self, struct symbol *sym) +{ + return ((void *)sym) - self->sym_priv_size; +} + +struct symbol *dso__find_symbol(struct dso *self, __u64 ip); + +int dso__load_kernel(struct dso *self, const char *vmlinux, + symbol_filter_t filter, int verbose); +int dso__load(struct dso *self, symbol_filter_t filter, int verbose); + +size_t dso__fprintf(struct dso *self, FILE *fp); + +void symbol__init(void); +#endif /* _PERF_SYMBOL_ */ diff --git a/trunk/tools/perf/util/usage.c b/trunk/tools/perf/util/usage.c new file mode 100644 index 000000000000..e16bf9a707e8 --- /dev/null +++ b/trunk/tools/perf/util/usage.c @@ -0,0 +1,80 @@ +/* + * GIT - The information manager from hell + * + * Copyright (C) Linus Torvalds, 2005 + */ +#include "util.h" + +static void report(const char *prefix, const char *err, va_list params) +{ + char msg[1024]; + vsnprintf(msg, sizeof(msg), err, params); + fprintf(stderr, " %s%s\n", prefix, msg); +} + +static NORETURN void usage_builtin(const char *err) +{ + fprintf(stderr, "\n Usage: %s\n", err); + exit(129); +} + +static NORETURN void die_builtin(const char *err, va_list params) +{ + report(" Fatal: ", err, params); + exit(128); +} + +static void error_builtin(const char *err, va_list params) +{ + report(" Error: ", err, params); +} + +static void warn_builtin(const char *warn, va_list params) +{ + report(" Warning: ", warn, params); +} + +/* If we are in a dlopen()ed .so write to a global variable would segfault + * (ugh), so keep things static. */ +static void (*usage_routine)(const char *err) NORETURN = usage_builtin; +static void (*die_routine)(const char *err, va_list params) NORETURN = die_builtin; +static void (*error_routine)(const char *err, va_list params) = error_builtin; +static void (*warn_routine)(const char *err, va_list params) = warn_builtin; + +void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN) +{ + die_routine = routine; +} + +void usage(const char *err) +{ + usage_routine(err); +} + +void die(const char *err, ...) +{ + va_list params; + + va_start(params, err); + die_routine(err, params); + va_end(params); +} + +int error(const char *err, ...) +{ + va_list params; + + va_start(params, err); + error_routine(err, params); + va_end(params); + return -1; +} + +void warning(const char *warn, ...) +{ + va_list params; + + va_start(params, warn); + warn_routine(warn, params); + va_end(params); +} diff --git a/trunk/tools/perf/util/util.h b/trunk/tools/perf/util/util.h new file mode 100644 index 000000000000..76590a16c271 --- /dev/null +++ b/trunk/tools/perf/util/util.h @@ -0,0 +1,410 @@ +#ifndef GIT_COMPAT_UTIL_H +#define GIT_COMPAT_UTIL_H + +#define _FILE_OFFSET_BITS 64 + +#ifndef FLEX_ARRAY +/* + * See if our compiler is known to support flexible array members. + */ +#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) +# define FLEX_ARRAY /* empty */ +#elif defined(__GNUC__) +# if (__GNUC__ >= 3) +# define FLEX_ARRAY /* empty */ +# else +# define FLEX_ARRAY 0 /* older GNU extension */ +# endif +#endif + +/* + * Otherwise, default to safer but a bit wasteful traditional style + */ +#ifndef FLEX_ARRAY +# define FLEX_ARRAY 1 +#endif +#endif + +#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) + +#ifdef __GNUC__ +#define TYPEOF(x) (__typeof__(x)) +#else +#define TYPEOF(x) +#endif + +#define MSB(x, bits) ((x) & TYPEOF(x)(~0ULL << (sizeof(x) * 8 - (bits)))) +#define HAS_MULTI_BITS(i) ((i) & ((i) - 1)) /* checks if an integer has more than 1 bit set */ + +/* Approximation of the length of the decimal representation of this type. */ +#define decimal_length(x) ((int)(sizeof(x) * 2.56 + 0.5) + 1) + +#if !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(__USLC__) && !defined(_M_UNIX) +#define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */ +#define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */ +#endif +#define _ALL_SOURCE 1 +#define _GNU_SOURCE 1 +#define _BSD_SOURCE 1 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifndef __MINGW32__ +#include +#include +#include +#include +#ifndef NO_SYS_SELECT_H +#include +#endif +#include +#include +#include +#include +#include +#include +#if defined(__CYGWIN__) +#undef _XOPEN_SOURCE +#include +#define _XOPEN_SOURCE 600 +#include "compat/cygwin.h" +#else +#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */ +#include +#define _ALL_SOURCE 1 +#endif +#else /* __MINGW32__ */ +/* pull in Windows compatibility stuff */ +#include "compat/mingw.h" +#endif /* __MINGW32__ */ + +#ifndef NO_ICONV +#include +#endif + +#ifndef NO_OPENSSL +#include +#include +#endif + +/* On most systems would have given us this, but + * not on some systems (e.g. GNU/Hurd). + */ +#ifndef PATH_MAX +#define PATH_MAX 4096 +#endif + +#ifndef PRIuMAX +#define PRIuMAX "llu" +#endif + +#ifndef PRIu32 +#define PRIu32 "u" +#endif + +#ifndef PRIx32 +#define PRIx32 "x" +#endif + +#ifndef PATH_SEP +#define PATH_SEP ':' +#endif + +#ifndef STRIP_EXTENSION +#define STRIP_EXTENSION "" +#endif + +#ifndef has_dos_drive_prefix +#define has_dos_drive_prefix(path) 0 +#endif + +#ifndef is_dir_sep +#define is_dir_sep(c) ((c) == '/') +#endif + +#ifdef __GNUC__ +#define NORETURN __attribute__((__noreturn__)) +#else +#define NORETURN +#ifndef __attribute__ +#define __attribute__(x) +#endif +#endif + +/* General helper functions */ +extern void usage(const char *err) NORETURN; +extern void die(const char *err, ...) NORETURN __attribute__((format (printf, 1, 2))); +extern int error(const char *err, ...) __attribute__((format (printf, 1, 2))); +extern void warning(const char *err, ...) __attribute__((format (printf, 1, 2))); + +extern void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN); + +extern int prefixcmp(const char *str, const char *prefix); +extern time_t tm_to_time_t(const struct tm *tm); + +static inline const char *skip_prefix(const char *str, const char *prefix) +{ + size_t len = strlen(prefix); + return strncmp(str, prefix, len) ? NULL : str + len; +} + +#if defined(NO_MMAP) || defined(USE_WIN32_MMAP) + +#ifndef PROT_READ +#define PROT_READ 1 +#define PROT_WRITE 2 +#define MAP_PRIVATE 1 +#define MAP_FAILED ((void*)-1) +#endif + +#define mmap git_mmap +#define munmap git_munmap +extern void *git_mmap(void *start, size_t length, int prot, int flags, int fd, off_t offset); +extern int git_munmap(void *start, size_t length); + +#else /* NO_MMAP || USE_WIN32_MMAP */ + +#include + +#endif /* NO_MMAP || USE_WIN32_MMAP */ + +#ifdef NO_MMAP + +/* This value must be multiple of (pagesize * 2) */ +#define DEFAULT_PACKED_GIT_WINDOW_SIZE (1 * 1024 * 1024) + +#else /* NO_MMAP */ + +/* This value must be multiple of (pagesize * 2) */ +#define DEFAULT_PACKED_GIT_WINDOW_SIZE \ + (sizeof(void*) >= 8 \ + ? 1 * 1024 * 1024 * 1024 \ + : 32 * 1024 * 1024) + +#endif /* NO_MMAP */ + +#ifdef NO_ST_BLOCKS_IN_STRUCT_STAT +#define on_disk_bytes(st) ((st).st_size) +#else +#define on_disk_bytes(st) ((st).st_blocks * 512) +#endif + +#define DEFAULT_PACKED_GIT_LIMIT \ + ((1024L * 1024L) * (sizeof(void*) >= 8 ? 8192 : 256)) + +#ifdef NO_PREAD +#define pread git_pread +extern ssize_t git_pread(int fd, void *buf, size_t count, off_t offset); +#endif +/* + * Forward decl that will remind us if its twin in cache.h changes. + * This function is used in compat/pread.c. But we can't include + * cache.h there. + */ +extern ssize_t read_in_full(int fd, void *buf, size_t count); + +#ifdef NO_SETENV +#define setenv gitsetenv +extern int gitsetenv(const char *, const char *, int); +#endif + +#ifdef NO_MKDTEMP +#define mkdtemp gitmkdtemp +extern char *gitmkdtemp(char *); +#endif + +#ifdef NO_UNSETENV +#define unsetenv gitunsetenv +extern void gitunsetenv(const char *); +#endif + +#ifdef NO_STRCASESTR +#define strcasestr gitstrcasestr +extern char *gitstrcasestr(const char *haystack, const char *needle); +#endif + +#ifdef NO_STRLCPY +#define strlcpy gitstrlcpy +extern size_t gitstrlcpy(char *, const char *, size_t); +#endif + +#ifdef NO_STRTOUMAX +#define strtoumax gitstrtoumax +extern uintmax_t gitstrtoumax(const char *, char **, int); +#endif + +#ifdef NO_HSTRERROR +#define hstrerror githstrerror +extern const char *githstrerror(int herror); +#endif + +#ifdef NO_MEMMEM +#define memmem gitmemmem +void *gitmemmem(const void *haystack, size_t haystacklen, + const void *needle, size_t needlelen); +#endif + +#ifdef FREAD_READS_DIRECTORIES +#ifdef fopen +#undef fopen +#endif +#define fopen(a,b) git_fopen(a,b) +extern FILE *git_fopen(const char*, const char*); +#endif + +#ifdef SNPRINTF_RETURNS_BOGUS +#define snprintf git_snprintf +extern int git_snprintf(char *str, size_t maxsize, + const char *format, ...); +#define vsnprintf git_vsnprintf +extern int git_vsnprintf(char *str, size_t maxsize, + const char *format, va_list ap); +#endif + +#ifdef __GLIBC_PREREQ +#if __GLIBC_PREREQ(2, 1) +#define HAVE_STRCHRNUL +#endif +#endif + +#ifndef HAVE_STRCHRNUL +#define strchrnul gitstrchrnul +static inline char *gitstrchrnul(const char *s, int c) +{ + while (*s && *s != c) + s++; + return (char *)s; +} +#endif + +/* + * Wrappers: + */ +extern char *xstrdup(const char *str); +extern void *xmalloc(size_t size); +extern void *xmemdupz(const void *data, size_t len); +extern char *xstrndup(const char *str, size_t len); +extern void *xrealloc(void *ptr, size_t size); +extern void *xcalloc(size_t nmemb, size_t size); +extern void *xmmap(void *start, size_t length, int prot, int flags, int fd, off_t offset); +extern ssize_t xread(int fd, void *buf, size_t len); +extern ssize_t xwrite(int fd, const void *buf, size_t len); +extern int xdup(int fd); +extern FILE *xfdopen(int fd, const char *mode); +extern int xmkstemp(char *template); + +static inline size_t xsize_t(off_t len) +{ + return (size_t)len; +} + +static inline int has_extension(const char *filename, const char *ext) +{ + size_t len = strlen(filename); + size_t extlen = strlen(ext); + return len > extlen && !memcmp(filename + len - extlen, ext, extlen); +} + +/* Sane ctype - no locale, and works with signed chars */ +#undef isascii +#undef isspace +#undef isdigit +#undef isalpha +#undef isalnum +#undef tolower +#undef toupper +extern unsigned char sane_ctype[256]; +#define GIT_SPACE 0x01 +#define GIT_DIGIT 0x02 +#define GIT_ALPHA 0x04 +#define GIT_GLOB_SPECIAL 0x08 +#define GIT_REGEX_SPECIAL 0x10 +#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0) +#define isascii(x) (((x) & ~0x7f) == 0) +#define isspace(x) sane_istest(x,GIT_SPACE) +#define isdigit(x) sane_istest(x,GIT_DIGIT) +#define isalpha(x) sane_istest(x,GIT_ALPHA) +#define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT) +#define is_glob_special(x) sane_istest(x,GIT_GLOB_SPECIAL) +#define is_regex_special(x) sane_istest(x,GIT_GLOB_SPECIAL | GIT_REGEX_SPECIAL) +#define tolower(x) sane_case((unsigned char)(x), 0x20) +#define toupper(x) sane_case((unsigned char)(x), 0) + +static inline int sane_case(int x, int high) +{ + if (sane_istest(x, GIT_ALPHA)) + x = (x & ~0x20) | high; + return x; +} + +static inline int strtoul_ui(char const *s, int base, unsigned int *result) +{ + unsigned long ul; + char *p; + + errno = 0; + ul = strtoul(s, &p, base); + if (errno || *p || p == s || (unsigned int) ul != ul) + return -1; + *result = ul; + return 0; +} + +static inline int strtol_i(char const *s, int base, int *result) +{ + long ul; + char *p; + + errno = 0; + ul = strtol(s, &p, base); + if (errno || *p || p == s || (int) ul != ul) + return -1; + *result = ul; + return 0; +} + +#ifdef INTERNAL_QSORT +void git_qsort(void *base, size_t nmemb, size_t size, + int(*compar)(const void *, const void *)); +#define qsort git_qsort +#endif + +#ifndef DIR_HAS_BSD_GROUP_SEMANTICS +# define FORCE_DIR_SET_GID S_ISGID +#else +# define FORCE_DIR_SET_GID 0 +#endif + +#ifdef NO_NSEC +#undef USE_NSEC +#define ST_CTIME_NSEC(st) 0 +#define ST_MTIME_NSEC(st) 0 +#else +#ifdef USE_ST_TIMESPEC +#define ST_CTIME_NSEC(st) ((unsigned int)((st).st_ctimespec.tv_nsec)) +#define ST_MTIME_NSEC(st) ((unsigned int)((st).st_mtimespec.tv_nsec)) +#else +#define ST_CTIME_NSEC(st) ((unsigned int)((st).st_ctim.tv_nsec)) +#define ST_MTIME_NSEC(st) ((unsigned int)((st).st_mtim.tv_nsec)) +#endif +#endif + +#endif diff --git a/trunk/tools/perf/util/wrapper.c b/trunk/tools/perf/util/wrapper.c new file mode 100644 index 000000000000..6350d65f6d9e --- /dev/null +++ b/trunk/tools/perf/util/wrapper.c @@ -0,0 +1,206 @@ +/* + * Various trivial helper wrappers around standard functions + */ +#include "cache.h" + +/* + * There's no pack memory to release - but stay close to the Git + * version so wrap this away: + */ +static inline void release_pack_memory(size_t size, int flag) +{ +} + +char *xstrdup(const char *str) +{ + char *ret = strdup(str); + if (!ret) { + release_pack_memory(strlen(str) + 1, -1); + ret = strdup(str); + if (!ret) + die("Out of memory, strdup failed"); + } + return ret; +} + +void *xmalloc(size_t size) +{ + void *ret = malloc(size); + if (!ret && !size) + ret = malloc(1); + if (!ret) { + release_pack_memory(size, -1); + ret = malloc(size); + if (!ret && !size) + ret = malloc(1); + if (!ret) + die("Out of memory, malloc failed"); + } +#ifdef XMALLOC_POISON + memset(ret, 0xA5, size); +#endif + return ret; +} + +/* + * xmemdupz() allocates (len + 1) bytes of memory, duplicates "len" bytes of + * "data" to the allocated memory, zero terminates the allocated memory, + * and returns a pointer to the allocated memory. If the allocation fails, + * the program dies. + */ +void *xmemdupz(const void *data, size_t len) +{ + char *p = xmalloc(len + 1); + memcpy(p, data, len); + p[len] = '\0'; + return p; +} + +char *xstrndup(const char *str, size_t len) +{ + char *p = memchr(str, '\0', len); + return xmemdupz(str, p ? p - str : len); +} + +void *xrealloc(void *ptr, size_t size) +{ + void *ret = realloc(ptr, size); + if (!ret && !size) + ret = realloc(ptr, 1); + if (!ret) { + release_pack_memory(size, -1); + ret = realloc(ptr, size); + if (!ret && !size) + ret = realloc(ptr, 1); + if (!ret) + die("Out of memory, realloc failed"); + } + return ret; +} + +void *xcalloc(size_t nmemb, size_t size) +{ + void *ret = calloc(nmemb, size); + if (!ret && (!nmemb || !size)) + ret = calloc(1, 1); + if (!ret) { + release_pack_memory(nmemb * size, -1); + ret = calloc(nmemb, size); + if (!ret && (!nmemb || !size)) + ret = calloc(1, 1); + if (!ret) + die("Out of memory, calloc failed"); + } + return ret; +} + +void *xmmap(void *start, size_t length, + int prot, int flags, int fd, off_t offset) +{ + void *ret = mmap(start, length, prot, flags, fd, offset); + if (ret == MAP_FAILED) { + if (!length) + return NULL; + release_pack_memory(length, fd); + ret = mmap(start, length, prot, flags, fd, offset); + if (ret == MAP_FAILED) + die("Out of memory? mmap failed: %s", strerror(errno)); + } + return ret; +} + +/* + * xread() is the same a read(), but it automatically restarts read() + * operations with a recoverable error (EAGAIN and EINTR). xread() + * DOES NOT GUARANTEE that "len" bytes is read even if the data is available. + */ +ssize_t xread(int fd, void *buf, size_t len) +{ + ssize_t nr; + while (1) { + nr = read(fd, buf, len); + if ((nr < 0) && (errno == EAGAIN || errno == EINTR)) + continue; + return nr; + } +} + +/* + * xwrite() is the same a write(), but it automatically restarts write() + * operations with a recoverable error (EAGAIN and EINTR). xwrite() DOES NOT + * GUARANTEE that "len" bytes is written even if the operation is successful. + */ +ssize_t xwrite(int fd, const void *buf, size_t len) +{ + ssize_t nr; + while (1) { + nr = write(fd, buf, len); + if ((nr < 0) && (errno == EAGAIN || errno == EINTR)) + continue; + return nr; + } +} + +ssize_t read_in_full(int fd, void *buf, size_t count) +{ + char *p = buf; + ssize_t total = 0; + + while (count > 0) { + ssize_t loaded = xread(fd, p, count); + if (loaded <= 0) + return total ? total : loaded; + count -= loaded; + p += loaded; + total += loaded; + } + + return total; +} + +ssize_t write_in_full(int fd, const void *buf, size_t count) +{ + const char *p = buf; + ssize_t total = 0; + + while (count > 0) { + ssize_t written = xwrite(fd, p, count); + if (written < 0) + return -1; + if (!written) { + errno = ENOSPC; + return -1; + } + count -= written; + p += written; + total += written; + } + + return total; +} + +int xdup(int fd) +{ + int ret = dup(fd); + if (ret < 0) + die("dup failed: %s", strerror(errno)); + return ret; +} + +FILE *xfdopen(int fd, const char *mode) +{ + FILE *stream = fdopen(fd, mode); + if (stream == NULL) + die("Out of memory? fdopen failed: %s", strerror(errno)); + return stream; +} + +int xmkstemp(char *template) +{ + int fd; + + fd = mkstemp(template); + if (fd < 0) + die("Unable to create temporary file: %s", strerror(errno)); + return fd; +} diff --git a/trunk/virt/kvm/ioapic.c b/trunk/virt/kvm/ioapic.c index c3b99def9cbc..1eddae94bab3 100644 --- a/trunk/virt/kvm/ioapic.c +++ b/trunk/virt/kvm/ioapic.c @@ -85,7 +85,7 @@ static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic, static int ioapic_service(struct kvm_ioapic *ioapic, unsigned int idx) { - union ioapic_redir_entry *pent; + union kvm_ioapic_redirect_entry *pent; int injected = -1; pent = &ioapic->redirtbl[idx]; @@ -142,149 +142,40 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) } } -static int ioapic_inj_irq(struct kvm_ioapic *ioapic, - struct kvm_vcpu *vcpu, - u8 vector, u8 trig_mode, u8 delivery_mode) -{ - ioapic_debug("irq %d trig %d deliv %d\n", vector, trig_mode, - delivery_mode); - - ASSERT((delivery_mode == IOAPIC_FIXED) || - (delivery_mode == IOAPIC_LOWEST_PRIORITY)); - - return kvm_apic_set_irq(vcpu, vector, trig_mode); -} - -static void ioapic_inj_nmi(struct kvm_vcpu *vcpu) -{ - kvm_inject_nmi(vcpu); - kvm_vcpu_kick(vcpu); -} - -u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, - u8 dest_mode) -{ - u32 mask = 0; - int i; - struct kvm *kvm = ioapic->kvm; - struct kvm_vcpu *vcpu; - - ioapic_debug("dest %d dest_mode %d\n", dest, dest_mode); - - if (dest_mode == 0) { /* Physical mode. */ - if (dest == 0xFF) { /* Broadcast. */ - for (i = 0; i < KVM_MAX_VCPUS; ++i) - if (kvm->vcpus[i] && kvm->vcpus[i]->arch.apic) - mask |= 1 << i; - return mask; - } - for (i = 0; i < KVM_MAX_VCPUS; ++i) { - vcpu = kvm->vcpus[i]; - if (!vcpu) - continue; - if (kvm_apic_match_physical_addr(vcpu->arch.apic, dest)) { - if (vcpu->arch.apic) - mask = 1 << i; - break; - } - } - } else if (dest != 0) /* Logical mode, MDA non-zero. */ - for (i = 0; i < KVM_MAX_VCPUS; ++i) { - vcpu = kvm->vcpus[i]; - if (!vcpu) - continue; - if (vcpu->arch.apic && - kvm_apic_match_logical_addr(vcpu->arch.apic, dest)) - mask |= 1 << vcpu->vcpu_id; - } - ioapic_debug("mask %x\n", mask); - return mask; -} - static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq) { - u8 dest = ioapic->redirtbl[irq].fields.dest_id; - u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode; - u8 delivery_mode = ioapic->redirtbl[irq].fields.delivery_mode; - u8 vector = ioapic->redirtbl[irq].fields.vector; - u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode; - u32 deliver_bitmask; - struct kvm_vcpu *vcpu; - int vcpu_id, r = -1; + union kvm_ioapic_redirect_entry *entry = &ioapic->redirtbl[irq]; + struct kvm_lapic_irq irqe; ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x " "vector=%x trig_mode=%x\n", - dest, dest_mode, delivery_mode, vector, trig_mode); - - deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic, dest, - dest_mode); - if (!deliver_bitmask) { - ioapic_debug("no target on destination\n"); - return 0; - } + entry->fields.dest, entry->fields.dest_mode, + entry->fields.delivery_mode, entry->fields.vector, + entry->fields.trig_mode); + + irqe.dest_id = entry->fields.dest_id; + irqe.vector = entry->fields.vector; + irqe.dest_mode = entry->fields.dest_mode; + irqe.trig_mode = entry->fields.trig_mode; + irqe.delivery_mode = entry->fields.delivery_mode << 8; + irqe.level = 1; + irqe.shorthand = 0; - switch (delivery_mode) { - case IOAPIC_LOWEST_PRIORITY: - vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector, - deliver_bitmask); #ifdef CONFIG_X86 - if (irq == 0) - vcpu = ioapic->kvm->vcpus[0]; -#endif - if (vcpu != NULL) - r = ioapic_inj_irq(ioapic, vcpu, vector, - trig_mode, delivery_mode); - else - ioapic_debug("null lowest prio vcpu: " - "mask=%x vector=%x delivery_mode=%x\n", - deliver_bitmask, vector, IOAPIC_LOWEST_PRIORITY); - break; - case IOAPIC_FIXED: -#ifdef CONFIG_X86 - if (irq == 0) - deliver_bitmask = 1; -#endif - for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) { - if (!(deliver_bitmask & (1 << vcpu_id))) - continue; - deliver_bitmask &= ~(1 << vcpu_id); - vcpu = ioapic->kvm->vcpus[vcpu_id]; - if (vcpu) { - if (r < 0) - r = 0; - r += ioapic_inj_irq(ioapic, vcpu, vector, - trig_mode, delivery_mode); - } - } - break; - case IOAPIC_NMI: - for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) { - if (!(deliver_bitmask & (1 << vcpu_id))) - continue; - deliver_bitmask &= ~(1 << vcpu_id); - vcpu = ioapic->kvm->vcpus[vcpu_id]; - if (vcpu) { - ioapic_inj_nmi(vcpu); - r = 1; - } - else - ioapic_debug("NMI to vcpu %d failed\n", - vcpu->vcpu_id); - } - break; - default: - printk(KERN_WARNING "Unsupported delivery mode %d\n", - delivery_mode); - break; + /* Always delivery PIT interrupt to vcpu 0 */ + if (irq == 0) { + irqe.dest_mode = 0; /* Physical mode. */ + irqe.dest_id = ioapic->kvm->vcpus[0]->vcpu_id; } - return r; +#endif + return kvm_irq_delivery_to_apic(ioapic->kvm, NULL, &irqe); } int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) { u32 old_irr = ioapic->irr; u32 mask = 1 << irq; - union ioapic_redir_entry entry; + union kvm_ioapic_redirect_entry entry; int ret = 1; if (irq >= 0 && irq < IOAPIC_NUM_PINS) { @@ -305,7 +196,7 @@ int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int pin, int trigger_mode) { - union ioapic_redir_entry *ent; + union kvm_ioapic_redirect_entry *ent; ent = &ioapic->redirtbl[pin]; diff --git a/trunk/virt/kvm/ioapic.h b/trunk/virt/kvm/ioapic.h index a34bd5e6436b..7080b713c160 100644 --- a/trunk/virt/kvm/ioapic.h +++ b/trunk/virt/kvm/ioapic.h @@ -40,22 +40,7 @@ struct kvm_ioapic { u32 id; u32 irr; u32 pad; - union ioapic_redir_entry { - u64 bits; - struct { - u8 vector; - u8 delivery_mode:3; - u8 dest_mode:1; - u8 delivery_status:1; - u8 polarity:1; - u8 remote_irr:1; - u8 trig_mode:1; - u8 mask:1; - u8 reserve:7; - u8 reserved[4]; - u8 dest_id; - } fields; - } redirtbl[IOAPIC_NUM_PINS]; + union kvm_ioapic_redirect_entry redirtbl[IOAPIC_NUM_PINS]; struct kvm_io_device dev; struct kvm *kvm; void (*ack_notifier)(void *opaque, int irq); @@ -79,13 +64,13 @@ static inline struct kvm_ioapic *ioapic_irqchip(struct kvm *kvm) return kvm->arch.vioapic; } -struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector, - unsigned long bitmap); +int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source, + int short_hand, int dest, int dest_mode); +int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2); void kvm_ioapic_update_eoi(struct kvm *kvm, int vector, int trigger_mode); int kvm_ioapic_init(struct kvm *kvm); int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level); void kvm_ioapic_reset(struct kvm_ioapic *ioapic); -u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, - u8 dest_mode); - +int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src, + struct kvm_lapic_irq *irq); #endif diff --git a/trunk/virt/kvm/iommu.c b/trunk/virt/kvm/iommu.c index 4c4037503600..15147583abd1 100644 --- a/trunk/virt/kvm/iommu.c +++ b/trunk/virt/kvm/iommu.c @@ -39,11 +39,16 @@ int kvm_iommu_map_pages(struct kvm *kvm, pfn_t pfn; int i, r = 0; struct iommu_domain *domain = kvm->arch.iommu_domain; + int flags; /* check if iommu exists and in use */ if (!domain) return 0; + flags = IOMMU_READ | IOMMU_WRITE; + if (kvm->arch.iommu_flags & KVM_IOMMU_CACHE_COHERENCY) + flags |= IOMMU_CACHE; + for (i = 0; i < npages; i++) { /* check if already mapped */ if (iommu_iova_to_phys(domain, gfn_to_gpa(gfn))) @@ -53,8 +58,7 @@ int kvm_iommu_map_pages(struct kvm *kvm, r = iommu_map_range(domain, gfn_to_gpa(gfn), pfn_to_hpa(pfn), - PAGE_SIZE, - IOMMU_READ | IOMMU_WRITE); + PAGE_SIZE, flags); if (r) { printk(KERN_ERR "kvm_iommu_map_address:" "iommu failed to map pfn=%lx\n", pfn); @@ -88,7 +92,7 @@ int kvm_assign_device(struct kvm *kvm, { struct pci_dev *pdev = NULL; struct iommu_domain *domain = kvm->arch.iommu_domain; - int r; + int r, last_flags; /* check if iommu exists and in use */ if (!domain) @@ -107,12 +111,29 @@ int kvm_assign_device(struct kvm *kvm, return r; } + last_flags = kvm->arch.iommu_flags; + if (iommu_domain_has_cap(kvm->arch.iommu_domain, + IOMMU_CAP_CACHE_COHERENCY)) + kvm->arch.iommu_flags |= KVM_IOMMU_CACHE_COHERENCY; + + /* Check if need to update IOMMU page table for guest memory */ + if ((last_flags ^ kvm->arch.iommu_flags) == + KVM_IOMMU_CACHE_COHERENCY) { + kvm_iommu_unmap_memslots(kvm); + r = kvm_iommu_map_memslots(kvm); + if (r) + goto out_unmap; + } + printk(KERN_DEBUG "assign device: host bdf = %x:%x:%x\n", assigned_dev->host_busnr, PCI_SLOT(assigned_dev->host_devfn), PCI_FUNC(assigned_dev->host_devfn)); return 0; +out_unmap: + kvm_iommu_unmap_memslots(kvm); + return r; } int kvm_deassign_device(struct kvm *kvm, diff --git a/trunk/virt/kvm/irq_comm.c b/trunk/virt/kvm/irq_comm.c index 864ac5483baa..a8bd466d00cc 100644 --- a/trunk/virt/kvm/irq_comm.c +++ b/trunk/virt/kvm/irq_comm.c @@ -22,6 +22,9 @@ #include #include +#ifdef CONFIG_IA64 +#include +#endif #include "irq.h" @@ -43,57 +46,73 @@ static int kvm_set_ioapic_irq(struct kvm_kernel_irq_routing_entry *e, return kvm_ioapic_set_irq(kvm->arch.vioapic, e->irqchip.pin, level); } -static int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, - struct kvm *kvm, int level) +inline static bool kvm_is_dm_lowest_prio(struct kvm_lapic_irq *irq) { - int vcpu_id, r = -1; - struct kvm_vcpu *vcpu; - struct kvm_ioapic *ioapic = ioapic_irqchip(kvm); - int dest_id = (e->msi.address_lo & MSI_ADDR_DEST_ID_MASK) - >> MSI_ADDR_DEST_ID_SHIFT; - int vector = (e->msi.data & MSI_DATA_VECTOR_MASK) - >> MSI_DATA_VECTOR_SHIFT; - int dest_mode = test_bit(MSI_ADDR_DEST_MODE_SHIFT, - (unsigned long *)&e->msi.address_lo); - int trig_mode = test_bit(MSI_DATA_TRIGGER_SHIFT, - (unsigned long *)&e->msi.data); - int delivery_mode = test_bit(MSI_DATA_DELIVERY_MODE_SHIFT, - (unsigned long *)&e->msi.data); - u32 deliver_bitmask; - - BUG_ON(!ioapic); - - deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic, - dest_id, dest_mode); - /* IOAPIC delivery mode value is the same as MSI here */ - switch (delivery_mode) { - case IOAPIC_LOWEST_PRIORITY: - vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector, - deliver_bitmask); - if (vcpu != NULL) - r = kvm_apic_set_irq(vcpu, vector, trig_mode); - else - printk(KERN_INFO "kvm: null lowest priority vcpu!\n"); - break; - case IOAPIC_FIXED: - for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) { - if (!(deliver_bitmask & (1 << vcpu_id))) - continue; - deliver_bitmask &= ~(1 << vcpu_id); - vcpu = ioapic->kvm->vcpus[vcpu_id]; - if (vcpu) { - if (r < 0) - r = 0; - r += kvm_apic_set_irq(vcpu, vector, trig_mode); - } +#ifdef CONFIG_IA64 + return irq->delivery_mode == + (IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT); +#else + return irq->delivery_mode == APIC_DM_LOWEST; +#endif +} + +int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src, + struct kvm_lapic_irq *irq) +{ + int i, r = -1; + struct kvm_vcpu *vcpu, *lowest = NULL; + + if (irq->dest_mode == 0 && irq->dest_id == 0xff && + kvm_is_dm_lowest_prio(irq)) + printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n"); + + for (i = 0; i < KVM_MAX_VCPUS; i++) { + vcpu = kvm->vcpus[i]; + + if (!vcpu || !kvm_apic_present(vcpu)) + continue; + + if (!kvm_apic_match_dest(vcpu, src, irq->shorthand, + irq->dest_id, irq->dest_mode)) + continue; + + if (!kvm_is_dm_lowest_prio(irq)) { + if (r < 0) + r = 0; + r += kvm_apic_set_irq(vcpu, irq); + } else { + if (!lowest) + lowest = vcpu; + else if (kvm_apic_compare_prio(vcpu, lowest) < 0) + lowest = vcpu; } - break; - default: - break; } + + if (lowest) + r = kvm_apic_set_irq(lowest, irq); + return r; } +static int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, + struct kvm *kvm, int level) +{ + struct kvm_lapic_irq irq; + + irq.dest_id = (e->msi.address_lo & + MSI_ADDR_DEST_ID_MASK) >> MSI_ADDR_DEST_ID_SHIFT; + irq.vector = (e->msi.data & + MSI_DATA_VECTOR_MASK) >> MSI_DATA_VECTOR_SHIFT; + irq.dest_mode = (1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo; + irq.trig_mode = (1 << MSI_DATA_TRIGGER_SHIFT) & e->msi.data; + irq.delivery_mode = e->msi.data & 0x700; + irq.level = 1; + irq.shorthand = 0; + + /* TODO Deal with RH bit of MSI message address */ + return kvm_irq_delivery_to_apic(kvm, NULL, &irq); +} + /* This should be called with the kvm->lock mutex held * Return value: * < 0 Interrupt was ignored (masked or not delivered for other reasons) @@ -252,7 +271,7 @@ static int setup_routing_entry(struct kvm_kernel_irq_routing_entry *e, delta = 8; break; case KVM_IRQCHIP_IOAPIC: - e->set = kvm_set_ioapic_irq; + e->set = kvm_set_ioapic_irq; break; default: goto out; diff --git a/trunk/virt/kvm/kvm_main.c b/trunk/virt/kvm/kvm_main.c index 605697e9c4dd..764554350ed8 100644 --- a/trunk/virt/kvm/kvm_main.c +++ b/trunk/virt/kvm/kvm_main.c @@ -41,6 +41,8 @@ #include #include #include +#include +#include #include #include @@ -60,9 +62,6 @@ MODULE_AUTHOR("Qumranet"); MODULE_LICENSE("GPL"); -static int msi2intx = 1; -module_param(msi2intx, bool, 0); - DEFINE_SPINLOCK(kvm_lock); LIST_HEAD(vm_list); @@ -95,38 +94,96 @@ static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *h return NULL; } +static int find_index_from_host_irq(struct kvm_assigned_dev_kernel + *assigned_dev, int irq) +{ + int i, index; + struct msix_entry *host_msix_entries; + + host_msix_entries = assigned_dev->host_msix_entries; + + index = -1; + for (i = 0; i < assigned_dev->entries_nr; i++) + if (irq == host_msix_entries[i].vector) { + index = i; + break; + } + if (index < 0) { + printk(KERN_WARNING "Fail to find correlated MSI-X entry!\n"); + return 0; + } + + return index; +} + static void kvm_assigned_dev_interrupt_work_handler(struct work_struct *work) { struct kvm_assigned_dev_kernel *assigned_dev; + struct kvm *kvm; + int irq, i; assigned_dev = container_of(work, struct kvm_assigned_dev_kernel, interrupt_work); + kvm = assigned_dev->kvm; /* This is taken to safely inject irq inside the guest. When * the interrupt injection (or the ioapic code) uses a * finer-grained lock, update this */ - mutex_lock(&assigned_dev->kvm->lock); - kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, - assigned_dev->guest_irq, 1); - - if (assigned_dev->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_MSI) { - enable_irq(assigned_dev->host_irq); - assigned_dev->host_irq_disabled = false; + mutex_lock(&kvm->lock); + spin_lock_irq(&assigned_dev->assigned_dev_lock); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) { + struct kvm_guest_msix_entry *guest_entries = + assigned_dev->guest_msix_entries; + for (i = 0; i < assigned_dev->entries_nr; i++) { + if (!(guest_entries[i].flags & + KVM_ASSIGNED_MSIX_PENDING)) + continue; + guest_entries[i].flags &= ~KVM_ASSIGNED_MSIX_PENDING; + kvm_set_irq(assigned_dev->kvm, + assigned_dev->irq_source_id, + guest_entries[i].vector, 1); + irq = assigned_dev->host_msix_entries[i].vector; + if (irq != 0) + enable_irq(irq); + assigned_dev->host_irq_disabled = false; + } + } else { + kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, + assigned_dev->guest_irq, 1); + if (assigned_dev->irq_requested_type & + KVM_DEV_IRQ_GUEST_MSI) { + enable_irq(assigned_dev->host_irq); + assigned_dev->host_irq_disabled = false; + } } + + spin_unlock_irq(&assigned_dev->assigned_dev_lock); mutex_unlock(&assigned_dev->kvm->lock); } static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id) { + unsigned long flags; struct kvm_assigned_dev_kernel *assigned_dev = (struct kvm_assigned_dev_kernel *) dev_id; + spin_lock_irqsave(&assigned_dev->assigned_dev_lock, flags); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) { + int index = find_index_from_host_irq(assigned_dev, irq); + if (index < 0) + goto out; + assigned_dev->guest_msix_entries[index].flags |= + KVM_ASSIGNED_MSIX_PENDING; + } + schedule_work(&assigned_dev->interrupt_work); disable_irq_nosync(irq); assigned_dev->host_irq_disabled = true; +out: + spin_unlock_irqrestore(&assigned_dev->assigned_dev_lock, flags); return IRQ_HANDLED; } @@ -134,6 +191,7 @@ static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id) static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian) { struct kvm_assigned_dev_kernel *dev; + unsigned long flags; if (kian->gsi == -1) return; @@ -146,28 +204,30 @@ static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian) /* The guest irq may be shared so this ack may be * from another device. */ + spin_lock_irqsave(&dev->assigned_dev_lock, flags); if (dev->host_irq_disabled) { enable_irq(dev->host_irq); dev->host_irq_disabled = false; } + spin_unlock_irqrestore(&dev->assigned_dev_lock, flags); } -/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */ -static void kvm_free_assigned_irq(struct kvm *kvm, - struct kvm_assigned_dev_kernel *assigned_dev) +static void deassign_guest_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev) { - if (!irqchip_in_kernel(kvm)) - return; - kvm_unregister_irq_ack_notifier(&assigned_dev->ack_notifier); + assigned_dev->ack_notifier.gsi = -1; if (assigned_dev->irq_source_id != -1) kvm_free_irq_source_id(kvm, assigned_dev->irq_source_id); assigned_dev->irq_source_id = -1; + assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_GUEST_MASK); +} - if (!assigned_dev->irq_requested_type) - return; - +/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */ +static void deassign_host_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev) +{ /* * In kvm_free_device_irq, cancel_work_sync return true if: * 1. work is scheduled, and then cancelled. @@ -184,17 +244,64 @@ static void kvm_free_assigned_irq(struct kvm *kvm, * now, the kvm state is still legal for probably we also have to wait * interrupt_work done. */ - disable_irq_nosync(assigned_dev->host_irq); - cancel_work_sync(&assigned_dev->interrupt_work); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) { + int i; + for (i = 0; i < assigned_dev->entries_nr; i++) + disable_irq_nosync(assigned_dev-> + host_msix_entries[i].vector); + + cancel_work_sync(&assigned_dev->interrupt_work); + + for (i = 0; i < assigned_dev->entries_nr; i++) + free_irq(assigned_dev->host_msix_entries[i].vector, + (void *)assigned_dev); + + assigned_dev->entries_nr = 0; + kfree(assigned_dev->host_msix_entries); + kfree(assigned_dev->guest_msix_entries); + pci_disable_msix(assigned_dev->dev); + } else { + /* Deal with MSI and INTx */ + disable_irq_nosync(assigned_dev->host_irq); + cancel_work_sync(&assigned_dev->interrupt_work); - free_irq(assigned_dev->host_irq, (void *)assigned_dev); + free_irq(assigned_dev->host_irq, (void *)assigned_dev); - if (assigned_dev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) - pci_disable_msi(assigned_dev->dev); + if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSI) + pci_disable_msi(assigned_dev->dev); + } - assigned_dev->irq_requested_type = 0; + assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_HOST_MASK); } +static int kvm_deassign_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev, + unsigned long irq_requested_type) +{ + unsigned long guest_irq_type, host_irq_type; + + if (!irqchip_in_kernel(kvm)) + return -EINVAL; + /* no irq assignment to deassign */ + if (!assigned_dev->irq_requested_type) + return -ENXIO; + + host_irq_type = irq_requested_type & KVM_DEV_IRQ_HOST_MASK; + guest_irq_type = irq_requested_type & KVM_DEV_IRQ_GUEST_MASK; + + if (host_irq_type) + deassign_host_irq(kvm, assigned_dev); + if (guest_irq_type) + deassign_guest_irq(kvm, assigned_dev); + + return 0; +} + +static void kvm_free_assigned_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *assigned_dev) +{ + kvm_deassign_irq(kvm, assigned_dev, assigned_dev->irq_requested_type); +} static void kvm_free_assigned_device(struct kvm *kvm, struct kvm_assigned_dev_kernel @@ -226,190 +333,244 @@ void kvm_free_all_assigned_devices(struct kvm *kvm) } } -static int assigned_device_update_intx(struct kvm *kvm, - struct kvm_assigned_dev_kernel *adev, - struct kvm_assigned_irq *airq) +static int assigned_device_enable_host_intx(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev) { - adev->guest_irq = airq->guest_irq; - adev->ack_notifier.gsi = airq->guest_irq; + dev->host_irq = dev->dev->irq; + /* Even though this is PCI, we don't want to use shared + * interrupts. Sharing host devices with guest-assigned devices + * on the same interrupt line is not a happy situation: there + * are going to be long delays in accepting, acking, etc. + */ + if (request_irq(dev->host_irq, kvm_assigned_dev_intr, + 0, "kvm_assigned_intx_device", (void *)dev)) + return -EIO; + return 0; +} - if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_INTX) - return 0; +#ifdef __KVM_HAVE_MSI +static int assigned_device_enable_host_msi(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev) +{ + int r; - if (irqchip_in_kernel(kvm)) { - if (!msi2intx && - (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)) { - free_irq(adev->host_irq, (void *)adev); - pci_disable_msi(adev->dev); - } + if (!dev->dev->msi_enabled) { + r = pci_enable_msi(dev->dev); + if (r) + return r; + } - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; + dev->host_irq = dev->dev->irq; + if (request_irq(dev->host_irq, kvm_assigned_dev_intr, 0, + "kvm_assigned_msi_device", (void *)dev)) { + pci_disable_msi(dev->dev); + return -EIO; + } - if (airq->host_irq) - adev->host_irq = airq->host_irq; - else - adev->host_irq = adev->dev->irq; + return 0; +} +#endif - /* Even though this is PCI, we don't want to use shared - * interrupts. Sharing host devices with guest-assigned devices - * on the same interrupt line is not a happy situation: there - * are going to be long delays in accepting, acking, etc. - */ - if (request_irq(adev->host_irq, kvm_assigned_dev_intr, - 0, "kvm_assigned_intx_device", (void *)adev)) - return -EIO; +#ifdef __KVM_HAVE_MSIX +static int assigned_device_enable_host_msix(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev) +{ + int i, r = -EINVAL; + + /* host_msix_entries and guest_msix_entries should have been + * initialized */ + if (dev->entries_nr == 0) + return r; + + r = pci_enable_msix(dev->dev, dev->host_msix_entries, dev->entries_nr); + if (r) + return r; + + for (i = 0; i < dev->entries_nr; i++) { + r = request_irq(dev->host_msix_entries[i].vector, + kvm_assigned_dev_intr, 0, + "kvm_assigned_msix_device", + (void *)dev); + /* FIXME: free requested_irq's on failure */ + if (r) + return r; } - adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_INTX | - KVM_ASSIGNED_DEV_HOST_INTX; return 0; } -#ifdef CONFIG_X86 -static int assigned_device_update_msi(struct kvm *kvm, - struct kvm_assigned_dev_kernel *adev, - struct kvm_assigned_irq *airq) +#endif + +static int assigned_device_enable_guest_intx(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq) { - int r; + dev->guest_irq = irq->guest_irq; + dev->ack_notifier.gsi = irq->guest_irq; + return 0; +} - adev->guest_irq = airq->guest_irq; - if (airq->flags & KVM_DEV_IRQ_ASSIGN_ENABLE_MSI) { - /* x86 don't care upper address of guest msi message addr */ - adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_MSI; - adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_INTX; - adev->ack_notifier.gsi = -1; - } else if (msi2intx) { - adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_INTX; - adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_MSI; - adev->ack_notifier.gsi = airq->guest_irq; - } else { - /* - * Guest require to disable device MSI, we disable MSI and - * re-enable INTx by default again. Notice it's only for - * non-msi2intx. - */ - assigned_device_update_intx(kvm, adev, airq); - return 0; +#ifdef __KVM_HAVE_MSI +static int assigned_device_enable_guest_msi(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq) +{ + dev->guest_irq = irq->guest_irq; + dev->ack_notifier.gsi = -1; + return 0; +} +#endif +#ifdef __KVM_HAVE_MSIX +static int assigned_device_enable_guest_msix(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq) +{ + dev->guest_irq = irq->guest_irq; + dev->ack_notifier.gsi = -1; + return 0; +} +#endif + +static int assign_host_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + __u32 host_irq_type) +{ + int r = -EEXIST; + + if (dev->irq_requested_type & KVM_DEV_IRQ_HOST_MASK) + return r; + + switch (host_irq_type) { + case KVM_DEV_IRQ_HOST_INTX: + r = assigned_device_enable_host_intx(kvm, dev); + break; +#ifdef __KVM_HAVE_MSI + case KVM_DEV_IRQ_HOST_MSI: + r = assigned_device_enable_host_msi(kvm, dev); + break; +#endif +#ifdef __KVM_HAVE_MSIX + case KVM_DEV_IRQ_HOST_MSIX: + r = assigned_device_enable_host_msix(kvm, dev); + break; +#endif + default: + r = -EINVAL; } - if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) - return 0; + if (!r) + dev->irq_requested_type |= host_irq_type; - if (irqchip_in_kernel(kvm)) { - if (!msi2intx) { - if (adev->irq_requested_type & - KVM_ASSIGNED_DEV_HOST_INTX) - free_irq(adev->host_irq, (void *)adev); + return r; +} - r = pci_enable_msi(adev->dev); - if (r) - return r; - } +static int assign_guest_irq(struct kvm *kvm, + struct kvm_assigned_dev_kernel *dev, + struct kvm_assigned_irq *irq, + unsigned long guest_irq_type) +{ + int id; + int r = -EEXIST; + + if (dev->irq_requested_type & KVM_DEV_IRQ_GUEST_MASK) + return r; - adev->host_irq = adev->dev->irq; - if (request_irq(adev->host_irq, kvm_assigned_dev_intr, 0, - "kvm_assigned_msi_device", (void *)adev)) - return -EIO; + id = kvm_request_irq_source_id(kvm); + if (id < 0) + return id; + + dev->irq_source_id = id; + + switch (guest_irq_type) { + case KVM_DEV_IRQ_GUEST_INTX: + r = assigned_device_enable_guest_intx(kvm, dev, irq); + break; +#ifdef __KVM_HAVE_MSI + case KVM_DEV_IRQ_GUEST_MSI: + r = assigned_device_enable_guest_msi(kvm, dev, irq); + break; +#endif +#ifdef __KVM_HAVE_MSIX + case KVM_DEV_IRQ_GUEST_MSIX: + r = assigned_device_enable_guest_msix(kvm, dev, irq); + break; +#endif + default: + r = -EINVAL; } - if (!msi2intx) - adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_MSI; + if (!r) { + dev->irq_requested_type |= guest_irq_type; + kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier); + } else + kvm_free_irq_source_id(kvm, dev->irq_source_id); - adev->irq_requested_type |= KVM_ASSIGNED_DEV_HOST_MSI; - return 0; + return r; } -#endif +/* TODO Deal with KVM_DEV_IRQ_ASSIGNED_MASK_MSIX */ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm, - struct kvm_assigned_irq - *assigned_irq) + struct kvm_assigned_irq *assigned_irq) { - int r = 0; + int r = -EINVAL; struct kvm_assigned_dev_kernel *match; - u32 current_flags = 0, changed_flags; + unsigned long host_irq_type, guest_irq_type; - mutex_lock(&kvm->lock); + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (!irqchip_in_kernel(kvm)) + return r; + + mutex_lock(&kvm->lock); + r = -ENODEV; match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, assigned_irq->assigned_dev_id); - if (!match) { - mutex_unlock(&kvm->lock); - return -EINVAL; - } - - if (!match->irq_requested_type) { - INIT_WORK(&match->interrupt_work, - kvm_assigned_dev_interrupt_work_handler); - if (irqchip_in_kernel(kvm)) { - /* Register ack nofitier */ - match->ack_notifier.gsi = -1; - match->ack_notifier.irq_acked = - kvm_assigned_dev_ack_irq; - kvm_register_irq_ack_notifier(kvm, - &match->ack_notifier); - - /* Request IRQ source ID */ - r = kvm_request_irq_source_id(kvm); - if (r < 0) - goto out_release; - else - match->irq_source_id = r; - -#ifdef CONFIG_X86 - /* Determine host device irq type, we can know the - * result from dev->msi_enabled */ - if (msi2intx) - pci_enable_msi(match->dev); -#endif - } - } + if (!match) + goto out; - if ((match->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) && - (match->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_MSI)) - current_flags |= KVM_DEV_IRQ_ASSIGN_ENABLE_MSI; + host_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_HOST_MASK); + guest_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_GUEST_MASK); - changed_flags = assigned_irq->flags ^ current_flags; + r = -EINVAL; + /* can only assign one type at a time */ + if (hweight_long(host_irq_type) > 1) + goto out; + if (hweight_long(guest_irq_type) > 1) + goto out; + if (host_irq_type == 0 && guest_irq_type == 0) + goto out; - if ((changed_flags & KVM_DEV_IRQ_ASSIGN_MSI_ACTION) || - (msi2intx && match->dev->msi_enabled)) { -#ifdef CONFIG_X86 - r = assigned_device_update_msi(kvm, match, assigned_irq); - if (r) { - printk(KERN_WARNING "kvm: failed to enable " - "MSI device!\n"); - goto out_release; - } -#else - r = -ENOTTY; -#endif - } else if (assigned_irq->host_irq == 0 && match->dev->irq == 0) { - /* Host device IRQ 0 means don't support INTx */ - if (!msi2intx) { - printk(KERN_WARNING - "kvm: wait device to enable MSI!\n"); - r = 0; - } else { - printk(KERN_WARNING - "kvm: failed to enable MSI device!\n"); - r = -ENOTTY; - goto out_release; - } - } else { - /* Non-sharing INTx mode */ - r = assigned_device_update_intx(kvm, match, assigned_irq); - if (r) { - printk(KERN_WARNING "kvm: failed to enable " - "INTx device!\n"); - goto out_release; - } - } + r = 0; + if (host_irq_type) + r = assign_host_irq(kvm, match, host_irq_type); + if (r) + goto out; + if (guest_irq_type) + r = assign_guest_irq(kvm, match, assigned_irq, guest_irq_type); +out: mutex_unlock(&kvm->lock); return r; -out_release: +} + +static int kvm_vm_ioctl_deassign_dev_irq(struct kvm *kvm, + struct kvm_assigned_irq + *assigned_irq) +{ + int r = -ENODEV; + struct kvm_assigned_dev_kernel *match; + + mutex_lock(&kvm->lock); + + match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, + assigned_irq->assigned_dev_id); + if (!match) + goto out; + + r = kvm_deassign_irq(kvm, match, assigned_irq->flags); +out: mutex_unlock(&kvm->lock); - kvm_free_assigned_device(kvm, match); return r; } @@ -427,7 +588,7 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, assigned_dev->assigned_dev_id); if (match) { /* device already assigned */ - r = -EINVAL; + r = -EEXIST; goto out; } @@ -464,8 +625,12 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, match->host_devfn = assigned_dev->devfn; match->flags = assigned_dev->flags; match->dev = dev; + spin_lock_init(&match->assigned_dev_lock); match->irq_source_id = -1; match->kvm = kvm; + match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq; + INIT_WORK(&match->interrupt_work, + kvm_assigned_dev_interrupt_work_handler); list_add(&match->list, &kvm->arch.assigned_dev_head); @@ -878,6 +1043,8 @@ static void kvm_destroy_vm(struct kvm *kvm) #endif #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm); +#else + kvm_arch_flush_shadow(kvm); #endif kvm_arch_destroy_vm(kvm); mmdrop(mm); @@ -919,8 +1086,8 @@ int __kvm_set_memory_region(struct kvm *kvm, { int r; gfn_t base_gfn; - unsigned long npages; - unsigned long i; + unsigned long npages, ugfn; + unsigned long largepages, i; struct kvm_memory_slot *memslot; struct kvm_memory_slot old, new; @@ -960,7 +1127,7 @@ int __kvm_set_memory_region(struct kvm *kvm, for (i = 0; i < KVM_MEMORY_SLOTS; ++i) { struct kvm_memory_slot *s = &kvm->memslots[i]; - if (s == memslot) + if (s == memslot || !s->npages) continue; if (!((base_gfn + npages <= s->base_gfn) || (base_gfn >= s->base_gfn + s->npages))) @@ -995,11 +1162,8 @@ int __kvm_set_memory_region(struct kvm *kvm, new.userspace_addr = 0; } if (npages && !new.lpage_info) { - int largepages = npages / KVM_PAGES_PER_HPAGE; - if (npages % KVM_PAGES_PER_HPAGE) - largepages++; - if (base_gfn % KVM_PAGES_PER_HPAGE) - largepages++; + largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE; + largepages -= base_gfn / KVM_PAGES_PER_HPAGE; new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info)); @@ -1012,6 +1176,14 @@ int __kvm_set_memory_region(struct kvm *kvm, new.lpage_info[0].write_count = 1; if ((base_gfn+npages) % KVM_PAGES_PER_HPAGE) new.lpage_info[largepages-1].write_count = 1; + ugfn = new.userspace_addr >> PAGE_SHIFT; + /* + * If the gfn and userspace address are not aligned wrt each + * other, disable large page support for this slot + */ + if ((base_gfn ^ ugfn) & (KVM_PAGES_PER_HPAGE - 1)) + for (i = 0; i < largepages; ++i) + new.lpage_info[i].write_count = 1; } /* Allocate page dirty bitmap if needed */ @@ -1045,8 +1217,10 @@ int __kvm_set_memory_region(struct kvm *kvm, kvm_free_physmem_slot(&old, npages ? &new : NULL); /* Slot deletion case: we have to update the current slot */ + spin_lock(&kvm->mmu_lock); if (!npages) *memslot = old; + spin_unlock(&kvm->mmu_lock); #ifdef CONFIG_DMAR /* map the pages in iommu page table */ r = kvm_iommu_map_pages(kvm, base_gfn, npages); @@ -1456,12 +1630,14 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu) for (;;) { prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE); - if (kvm_cpu_has_interrupt(vcpu) || - kvm_cpu_has_pending_timer(vcpu) || - kvm_arch_vcpu_runnable(vcpu)) { + if ((kvm_arch_interrupt_allowed(vcpu) && + kvm_cpu_has_interrupt(vcpu)) || + kvm_arch_vcpu_runnable(vcpu)) { set_bit(KVM_REQ_UNHALT, &vcpu->requests); break; } + if (kvm_cpu_has_pending_timer(vcpu)) + break; if (signal_pending(current)) break; @@ -1595,6 +1771,88 @@ static int kvm_vcpu_ioctl_set_sigmask(struct kvm_vcpu *vcpu, sigset_t *sigset) return 0; } +#ifdef __KVM_HAVE_MSIX +static int kvm_vm_ioctl_set_msix_nr(struct kvm *kvm, + struct kvm_assigned_msix_nr *entry_nr) +{ + int r = 0; + struct kvm_assigned_dev_kernel *adev; + + mutex_lock(&kvm->lock); + + adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, + entry_nr->assigned_dev_id); + if (!adev) { + r = -EINVAL; + goto msix_nr_out; + } + + if (adev->entries_nr == 0) { + adev->entries_nr = entry_nr->entry_nr; + if (adev->entries_nr == 0 || + adev->entries_nr >= KVM_MAX_MSIX_PER_DEV) { + r = -EINVAL; + goto msix_nr_out; + } + + adev->host_msix_entries = kzalloc(sizeof(struct msix_entry) * + entry_nr->entry_nr, + GFP_KERNEL); + if (!adev->host_msix_entries) { + r = -ENOMEM; + goto msix_nr_out; + } + adev->guest_msix_entries = kzalloc( + sizeof(struct kvm_guest_msix_entry) * + entry_nr->entry_nr, GFP_KERNEL); + if (!adev->guest_msix_entries) { + kfree(adev->host_msix_entries); + r = -ENOMEM; + goto msix_nr_out; + } + } else /* Not allowed set MSI-X number twice */ + r = -EINVAL; +msix_nr_out: + mutex_unlock(&kvm->lock); + return r; +} + +static int kvm_vm_ioctl_set_msix_entry(struct kvm *kvm, + struct kvm_assigned_msix_entry *entry) +{ + int r = 0, i; + struct kvm_assigned_dev_kernel *adev; + + mutex_lock(&kvm->lock); + + adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, + entry->assigned_dev_id); + + if (!adev) { + r = -EINVAL; + goto msix_entry_out; + } + + for (i = 0; i < adev->entries_nr; i++) + if (adev->guest_msix_entries[i].vector == 0 || + adev->guest_msix_entries[i].entry == entry->entry) { + adev->guest_msix_entries[i].entry = entry->entry; + adev->guest_msix_entries[i].vector = entry->gsi; + adev->host_msix_entries[i].entry = entry->entry; + break; + } + if (i == adev->entries_nr) { + r = -ENOSPC; + goto msix_entry_out; + } + +msix_entry_out: + mutex_unlock(&kvm->lock); + + return r; +} +#endif + static long kvm_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { @@ -1866,6 +2124,11 @@ static long kvm_vm_ioctl(struct file *filp, break; } case KVM_ASSIGN_IRQ: { + r = -EOPNOTSUPP; + break; + } +#ifdef KVM_CAP_ASSIGN_DEV_IRQ + case KVM_ASSIGN_DEV_IRQ: { struct kvm_assigned_irq assigned_irq; r = -EFAULT; @@ -1876,6 +2139,18 @@ static long kvm_vm_ioctl(struct file *filp, goto out; break; } + case KVM_DEASSIGN_DEV_IRQ: { + struct kvm_assigned_irq assigned_irq; + + r = -EFAULT; + if (copy_from_user(&assigned_irq, argp, sizeof assigned_irq)) + goto out; + r = kvm_vm_ioctl_deassign_dev_irq(kvm, &assigned_irq); + if (r) + goto out; + break; + } +#endif #endif #ifdef KVM_CAP_DEVICE_DEASSIGNMENT case KVM_DEASSIGN_PCI_DEVICE: { @@ -1919,7 +2194,29 @@ static long kvm_vm_ioctl(struct file *filp, vfree(entries); break; } +#ifdef __KVM_HAVE_MSIX + case KVM_ASSIGN_SET_MSIX_NR: { + struct kvm_assigned_msix_nr entry_nr; + r = -EFAULT; + if (copy_from_user(&entry_nr, argp, sizeof entry_nr)) + goto out; + r = kvm_vm_ioctl_set_msix_nr(kvm, &entry_nr); + if (r) + goto out; + break; + } + case KVM_ASSIGN_SET_MSIX_ENTRY: { + struct kvm_assigned_msix_entry entry; + r = -EFAULT; + if (copy_from_user(&entry, argp, sizeof entry)) + goto out; + r = kvm_vm_ioctl_set_msix_entry(kvm, &entry); + if (r) + goto out; + break; + } #endif +#endif /* KVM_CAP_IRQ_ROUTING */ default: r = kvm_arch_vm_ioctl(filp, ioctl, arg); } @@ -1985,6 +2282,7 @@ static long kvm_dev_ioctl_check_extension_generic(long arg) switch (arg) { case KVM_CAP_USER_MEMORY: case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: + case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS: return 1; #ifdef CONFIG_HAVE_KVM_IRQCHIP case KVM_CAP_IRQ_ROUTING: @@ -2113,15 +2411,15 @@ EXPORT_SYMBOL_GPL(kvm_handle_fault_on_reboot); static int kvm_reboot(struct notifier_block *notifier, unsigned long val, void *v) { - if (val == SYS_RESTART) { - /* - * Some (well, at least mine) BIOSes hang on reboot if - * in vmx root mode. - */ - printk(KERN_INFO "kvm: exiting hardware virtualization\n"); - kvm_rebooting = true; - on_each_cpu(hardware_disable, NULL, 1); - } + /* + * Some (well, at least mine) BIOSes hang on reboot if + * in vmx root mode. + * + * And Intel TXT required VMX off for all cpu when system shutdown. + */ + printk(KERN_INFO "kvm: exiting hardware virtualization\n"); + kvm_rebooting = true; + on_each_cpu(hardware_disable, NULL, 1); return NOTIFY_OK; } @@ -2302,7 +2600,7 @@ int kvm_init(void *opaque, unsigned int vcpu_size, bad_pfn = page_to_pfn(bad_page); - if (!alloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) { r = -ENOMEM; goto out_free_0; } @@ -2354,9 +2652,6 @@ int kvm_init(void *opaque, unsigned int vcpu_size, kvm_preempt_ops.sched_in = kvm_sched_in; kvm_preempt_ops.sched_out = kvm_sched_out; -#ifndef CONFIG_X86 - msi2intx = 0; -#endif return 0;