diff --git a/[refs] b/[refs] index 0aff727680bb..7de46de86486 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 1c7ebf17a4d874fe38226a4f5990cb7be702e331 +refs/heads/master: 54db6eee06b51278a79e007765151fb5e71c370c diff --git a/trunk/arch/arm/mach-omap1/board-ams-delta.c b/trunk/arch/arm/mach-omap1/board-ams-delta.c index a8fce3ccc707..e255164ff087 100644 --- a/trunk/arch/arm/mach-omap1/board-ams-delta.c +++ b/trunk/arch/arm/mach-omap1/board-ams-delta.c @@ -625,6 +625,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .atag_offset = 0x100, .map_io = ams_delta_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-fsample.c b/trunk/arch/arm/mach-omap1/board-fsample.c index 8b5800acf726..4b6de70c47a6 100644 --- a/trunk/arch/arm/mach-omap1/board-fsample.c +++ b/trunk/arch/arm/mach-omap1/board-fsample.c @@ -27,10 +27,10 @@ #include #include -#include +#include #include #include -#include <../plat-omap/fpga.h> +#include #include #include @@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = { static void __init fsample_init_smc91x(void) { - __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -362,6 +362,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .atag_offset = 0x100, .map_io = omap_fsample_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-generic.c b/trunk/arch/arm/mach-omap1/board-generic.c index 608e7d2a2778..4ec579fdd366 100644 --- a/trunk/arch/arm/mach-omap1/board-generic.c +++ b/trunk/arch/arm/mach-omap1/board-generic.c @@ -81,6 +81,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-h2-mmc.c b/trunk/arch/arm/mach-omap1/board-h2-mmc.c index 7119ef28e0ad..e1362ce48497 100644 --- a/trunk/arch/arm/mach-omap1/board-h2-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-h2-mmc.c @@ -13,11 +13,12 @@ */ #include #include -#include + #include +#include + #include "board-h2.h" -#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/trunk/arch/arm/mach-omap1/board-h2.c b/trunk/arch/arm/mach-omap1/board-h2.c index 9134b646f01b..376f7f29ef77 100644 --- a/trunk/arch/arm/mach-omap1/board-h2.c +++ b/trunk/arch/arm/mach-omap1/board-h2.c @@ -39,8 +39,8 @@ #include #include -#include -#include +#include +#include #include #include #include @@ -50,7 +50,6 @@ #include "common.h" #include "board-h2.h" -#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -459,6 +458,7 @@ MACHINE_START(OMAP_H2, "TI-H2") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-h3-mmc.c b/trunk/arch/arm/mach-omap1/board-h3-mmc.c index 17d77914d769..c74daace8cd6 100644 --- a/trunk/arch/arm/mach-omap1/board-h3-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,8 +16,9 @@ #include +#include + #include "board-h3.h" -#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/trunk/arch/arm/mach-omap1/board-h3.c b/trunk/arch/arm/mach-omap1/board-h3.c index bf213d1d8075..ededdb7ef28c 100644 --- a/trunk/arch/arm/mach-omap1/board-h3.c +++ b/trunk/arch/arm/mach-omap1/board-h3.c @@ -41,9 +41,9 @@ #include #include -#include +#include #include -#include +#include #include #include @@ -452,6 +452,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-htcherald.c b/trunk/arch/arm/mach-omap1/board-htcherald.c index 356f816c84a6..87ab2086ef96 100644 --- a/trunk/arch/arm/mach-omap1/board-htcherald.c +++ b/trunk/arch/arm/mach-omap1/board-htcherald.c @@ -43,7 +43,7 @@ #include #include -#include "mmc.h" +#include #include #include @@ -600,6 +600,7 @@ MACHINE_START(HERALD, "HTC Herald") .atag_offset = 0x100, .map_io = htcherald_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-innovator.c b/trunk/arch/arm/mach-omap1/board-innovator.c index c66334f22471..db5f7d2976e7 100644 --- a/trunk/arch/arm/mach-omap1/board-innovator.c +++ b/trunk/arch/arm/mach-omap1/board-innovator.c @@ -33,16 +33,16 @@ #include #include -#include <../plat-omap/fpga.h> -#include +#include +#include #include +#include #include #include #include "iomap.h" #include "common.h" -#include "mmc.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -215,7 +215,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { static int innovator_get_pendown_state(void) { - return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); + return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); } static const struct ads7846_platform_data innovator1510_ts_info = { @@ -279,7 +279,7 @@ static struct platform_device *innovator1610_devices[] __initdata = { static void __init innovator_init_smc91x(void) { if (cpu_is_omap1510()) { - __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, + fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1, OMAP1510_FPGA_RST); udelay(750); } else { @@ -335,10 +335,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (power_on) - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), + fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); else - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), + fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3), OMAP1510_FPGA_POWER); return 0; @@ -390,14 +390,14 @@ static void __init innovator_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - reg = __raw_readb(OMAP1510_FPGA_POWER); + reg = fpga_read(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM1_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); + fpga_write(reg, OMAP1510_FPGA_POWER); udelay(10); - reg = __raw_readb(OMAP1510_FPGA_POWER); + reg = fpga_read(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM2_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); + fpga_write(reg, OMAP1510_FPGA_POWER); udelay(10); platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); @@ -437,7 +437,6 @@ static void __init innovator_init(void) */ static void __init innovator_map_io(void) { -#ifdef CONFIG_ARCH_OMAP15XX omap15xx_map_io(); iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); @@ -445,10 +444,9 @@ static void __init innovator_map_io(void) /* Dump the Innovator FPGA rev early - useful info for support. */ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - __raw_readb(OMAP1510_FPGA_REV_HIGH), - __raw_readb(OMAP1510_FPGA_REV_LOW), - __raw_readb(OMAP1510_FPGA_BOARD_REV)); -#endif + fpga_read(OMAP1510_FPGA_REV_HIGH), + fpga_read(OMAP1510_FPGA_REV_LOW), + fpga_read(OMAP1510_FPGA_BOARD_REV)); } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") @@ -456,6 +454,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .atag_offset = 0x100, .map_io = innovator_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-nokia770.c b/trunk/arch/arm/mach-omap1/board-nokia770.c index 3e8ead67e459..7d5c06d6a52a 100644 --- a/trunk/arch/arm/mach-omap1/board-nokia770.c +++ b/trunk/arch/arm/mach-omap1/board-nokia770.c @@ -29,13 +29,13 @@ #include #include +#include +#include #include #include #include "common.h" -#include "clock.h" -#include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 @@ -251,6 +251,7 @@ MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-osk.c b/trunk/arch/arm/mach-omap1/board-osk.c index 872ea47cd28a..5973945a8741 100644 --- a/trunk/arch/arm/mach-omap1/board-osk.c +++ b/trunk/arch/arm/mach-omap1/board-osk.c @@ -48,7 +48,7 @@ #include #include -#include +#include #include #include @@ -606,6 +606,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-palmte.c b/trunk/arch/arm/mach-omap1/board-palmte.c index 584b6fab894b..1c578d58923a 100644 --- a/trunk/arch/arm/mach-omap1/board-palmte.c +++ b/trunk/arch/arm/mach-omap1/board-palmte.c @@ -36,8 +36,8 @@ #include #include -#include -#include +#include +#include #include #include @@ -45,7 +45,6 @@ #include #include "common.h" -#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -265,6 +264,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-palmtt.c b/trunk/arch/arm/mach-omap1/board-palmtt.c index fbc986bfe69e..97158095083c 100644 --- a/trunk/arch/arm/mach-omap1/board-palmtt.c +++ b/trunk/arch/arm/mach-omap1/board-palmtt.c @@ -28,16 +28,16 @@ #include #include #include -#include #include #include #include +#include #include #include -#include -#include +#include +#include #include #include @@ -45,7 +45,6 @@ #include #include "common.h" -#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -311,6 +310,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-palmz71.c b/trunk/arch/arm/mach-omap1/board-palmz71.c index 60d917a93763..e311032e7eeb 100644 --- a/trunk/arch/arm/mach-omap1/board-palmz71.c +++ b/trunk/arch/arm/mach-omap1/board-palmz71.c @@ -38,8 +38,8 @@ #include #include -#include -#include +#include +#include #include #include @@ -47,7 +47,6 @@ #include #include "common.h" -#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -327,6 +326,7 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-perseus2.c b/trunk/arch/arm/mach-omap1/board-perseus2.c index 030bd48727be..198b05417bfc 100644 --- a/trunk/arch/arm/mach-omap1/board-perseus2.c +++ b/trunk/arch/arm/mach-omap1/board-perseus2.c @@ -28,9 +28,9 @@ #include #include -#include +#include #include -#include <../plat-omap/fpga.h> +#include #include #include @@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { static void __init perseus2_init_smc91x(void) { - __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -324,6 +324,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-sx1-mmc.c b/trunk/arch/arm/mach-omap1/board-sx1-mmc.c index 4fcf19c78a08..5932d56e17bf 100644 --- a/trunk/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,10 +16,9 @@ #include #include +#include #include -#include "mmc.h" - #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/trunk/arch/arm/mach-omap1/board-sx1.c b/trunk/arch/arm/mach-omap1/board-sx1.c index 1ebc7e08d6e5..13bf2cc56814 100644 --- a/trunk/arch/arm/mach-omap1/board-sx1.c +++ b/trunk/arch/arm/mach-omap1/board-sx1.c @@ -36,16 +36,15 @@ #include #include -#include +#include #include -#include +#include #include #include #include #include "common.h" -#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -404,6 +403,7 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-voiceblue.c b/trunk/arch/arm/mach-omap1/board-voiceblue.c index abf705f49b19..ad75e3411d46 100644 --- a/trunk/arch/arm/mach-omap1/board-voiceblue.c +++ b/trunk/arch/arm/mach-omap1/board-voiceblue.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include @@ -286,6 +286,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, + .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/clock.c b/trunk/arch/arm/mach-omap1/clock.c index 9e74aa664acb..1e49eda9b68e 100644 --- a/trunk/arch/arm/mach-omap1/clock.c +++ b/trunk/arch/arm/mach-omap1/clock.c @@ -12,7 +12,6 @@ * published by the Free Software Foundation. */ #include -#include #include #include #include @@ -22,13 +21,13 @@ #include -#include "soc.h" -#include +#include +#include +#include +#include #include -#include "../plat-omap/sram.h" - #include "iomap.h" #include "clock.h" #include "opp.h" @@ -36,10 +35,6 @@ __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - /* * Omap1 specific clock functions */ @@ -611,497 +606,3 @@ void omap1_clk_disable_unused(struct clk *clk) } #endif - - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - omap1_clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); - - return -EINVAL; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -/* - * OMAP specific clock functions shared between omap1 and omap2 - */ - -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - -/* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) -{ - return clk->parent->rate; -} - -/* - * Used for clocks that have the same value as the parent clock, - * divided by some factor - */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) -{ - WARN_ON(!clk->fixed_div); - - return clk->parent->rate / clk->fixed_div; -} - -void clk_reparent(struct clk *child, struct clk *parent) -{ - list_del_init(&child->sibling); - if (parent) - list_add(&child->sibling, &parent->children); - child->parent = parent; - - /* now do the debugfs renaming to reattach the child - to the proper parent */ -} - -/* Propagate rate to children */ -void propagate_rate(struct clk *tclk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * recalculate_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - * Called at init. - */ -void recalculate_root_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &root_clks, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -void clk_enable_init_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clocks, node) - if (clkp->flags & ENABLE_ON_INIT) - clk_enable(clkp); -} - -/** - * omap_clk_get_by_name - locate OMAP struct clk by its name - * @name: name of the struct clk to locate - * - * Locate an OMAP struct clk by its name. Assumes that struct clk - * names are unique. Returns NULL if not found or a pointer to the - * struct clk if found. - */ -struct clk *omap_clk_get_by_name(const char *name) -{ - struct clk *c; - struct clk *ret = NULL; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(c, &clocks, node) { - if (!strcmp(c->name, name)) { - ret = c; - break; - } - } - - mutex_unlock(&clocks_mutex); - - return ret; -} - -int omap_clk_enable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->allow_idle) - c->ops->allow_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -int omap_clk_disable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->deny_idle) - c->ops->deny_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} - -static void clkll_disable_null(struct clk *clk) -{ -} - -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, -}; - -/* - * Dummy clock - * - * Used for clock aliases that are needed on some OMAPs, but not others - */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, -}; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - omap1_clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -late_initcall(omap_clk_enable_autoidle_all); -#endif - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include -#include - -static struct dentry *clk_debugfs_root; - -static int clk_dbg_show_summary(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, - c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int clk_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_dbg_show_summary, inode->i_private); -} - -static const struct file_operations debug_clock_fops = { - .open = clk_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - - d = debugfs_create_file("summary", S_IRUGO, - d, NULL, &debug_clock_fops); - if (!d) - return -ENOMEM; - - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/trunk/arch/arm/mach-omap1/clock.h b/trunk/arch/arm/mach-omap1/clock.h index 1e4918a3a5ee..3d04f4f67676 100644 --- a/trunk/arch/arm/mach-omap1/clock.h +++ b/trunk/arch/arm/mach-omap1/clock.h @@ -14,184 +14,8 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include -#include -#include - -struct module; -struct clk; - -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) /* 7xx, 850 */ -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ -#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ - - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - -/** - * struct clkops - some clock function pointers - * @enable: fn ptr that enables the current clock in hardware - * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock - * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. - */ -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); -}; - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children - * @rate: current clock rate - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @recalc: fn ptr that returns the clock's current rate - * @set_rate: fn ptr that can change the clock's current rate - * @round_rate: fn ptr that can round the clock's current rate - * @init: fn ptr to do clock-specific initialization - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled - * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div - * @flags: see "struct clk.flags possibilities" above - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. - */ -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - u8 enable_bit; - s8 usecount; - u8 fixed_div; - u8 flags; - u8 rate_offset; - u8 src_offset; -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -}; - -extern int mpurate; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); - -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; +#include int omap1_clk_init(void); void omap1_clk_late_init(void); diff --git a/trunk/arch/arm/mach-omap1/clock_data.c b/trunk/arch/arm/mach-omap1/clock_data.c index 28aea55a412e..9b45f4b0ee22 100644 --- a/trunk/arch/arm/mach-omap1/clock_data.c +++ b/trunk/arch/arm/mach-omap1/clock_data.c @@ -22,13 +22,14 @@ #include /* for machine_is_* */ -#include "soc.h" +#include +#include +#include +#include /* for omap_sram_reprogram_clock() */ #include #include /* for OTG_BASE */ -#include "../plat-omap/sram.h" - #include "iomap.h" #include "clock.h" @@ -764,6 +765,14 @@ static struct omap_clk omap_clks[] = { * init */ +static struct clk_functions omap1_clk_functions = { + .clk_enable = omap1_clk_enable, + .clk_disable = omap1_clk_disable, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, +}; + static void __init omap1_show_rates(void) { pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", @@ -794,6 +803,8 @@ int __init omap1_clk_init(void) if (!cpu_is_omap15xx()) omap_writew(0, SOFT_REQ_REG2); + clk_init(&omap1_clk_functions); + /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; diff --git a/trunk/arch/arm/mach-omap1/common.h b/trunk/arch/arm/mach-omap1/common.h index 26e19d3b7924..c2552b24f9f2 100644 --- a/trunk/arch/arm/mach-omap1/common.h +++ b/trunk/arch/arm/mach-omap1/common.h @@ -26,11 +26,8 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include "../plat-omap/common.h" +#include #include -#include - -#include "../plat-omap/i2c.h" #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -41,7 +38,6 @@ static inline void omap7xx_map_io(void) #endif #ifdef CONFIG_ARCH_OMAP15XX -void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else static inline void omap15xx_map_io(void) diff --git a/trunk/arch/arm/mach-omap1/devices.c b/trunk/arch/arm/mach-omap1/devices.c index 645668e2b1d5..d3fec92c54cb 100644 --- a/trunk/arch/arm/mach-omap1/devices.c +++ b/trunk/arch/arm/mach-omap1/devices.c @@ -19,19 +19,17 @@ #include -#include +#include #include +#include +#include #include #include #include -#include "../plat-omap/sram.h" - #include "common.h" #include "clock.h" -#include "dma.h" -#include "mmc.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -177,13 +175,6 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; - if (cpu_is_omap7xx()) - data->slots[0].features = MMC_OMAP7XX; - if (cpu_is_omap15xx()) - data->slots[0].features = MMC_OMAP15XX; - if (cpu_is_omap16xx()) - data->slots[0].features = MMC_OMAP16XX; - ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) ret = platform_device_add_data(pdev, data, sizeof(*data)); diff --git a/trunk/arch/arm/mach-omap1/dma.c b/trunk/arch/arm/mach-omap1/dma.c index 71305c15fbd5..29007fef84cd 100644 --- a/trunk/arch/arm/mach-omap1/dma.c +++ b/trunk/arch/arm/mach-omap1/dma.c @@ -25,13 +25,11 @@ #include #include -#include -#include +#include +#include #include -#include "dma.h" - #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP1_DMA_STRIDE 0x40 diff --git a/trunk/arch/arm/mach-omap1/dma.h b/trunk/arch/arm/mach-omap1/dma.h deleted file mode 100644 index da6345dab03f..000000000000 --- a/trunk/arch/arm/mach-omap1/dma.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * OMAP1 DMA channel definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __OMAP1_DMA_CHANNEL_H -#define __OMAP1_DMA_CHANNEL_H - -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/trunk/arch/arm/mach-omap1/flash.c b/trunk/arch/arm/mach-omap1/flash.c index b3fb531af94e..73ae6169aa4a 100644 --- a/trunk/arch/arm/mach-omap1/flash.c +++ b/trunk/arch/arm/mach-omap1/flash.c @@ -10,7 +10,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/fpga.c b/trunk/arch/arm/mach-omap1/fpga.c index 4ec220d8da5c..29ec50fc688d 100644 --- a/trunk/arch/arm/mach-omap1/fpga.c +++ b/trunk/arch/arm/mach-omap1/fpga.c @@ -27,7 +27,7 @@ #include #include -#include <../plat-omap/fpga.h> +#include #include diff --git a/trunk/arch/arm/mach-omap1/i2c.c b/trunk/arch/arm/mach-omap1/i2c.c index 32bcbb8d6c73..a0551a6d7451 100644 --- a/trunk/arch/arm/mach-omap1/i2c.c +++ b/trunk/arch/arm/mach-omap1/i2c.c @@ -19,25 +19,11 @@ * */ -#include +#include #include -#include "soc.h" +#include -#include "../plat-omap/i2c.h" - -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP1_INT_I2C (32 + 4) - -static const char name[] = "omap_i2c"; - -static struct resource i2c_resources[2] = { -}; - -static struct platform_device omap_i2c_devices[1] = { -}; - -static void __init omap1_i2c_mux_pins(int bus_id) +void __init omap1_i2c_mux_pins(int bus_id) { if (cpu_is_omap7xx()) { omap_cfg_reg(I2C_7XX_SDA); @@ -47,44 +33,3 @@ static void __init omap1_i2c_mux_pins(int bus_id) omap_cfg_reg(I2C_SCL); } } - -int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, - int bus_id) -{ - struct platform_device *pdev; - struct resource *res; - - omap1_i2c_mux_pins(bus_id); - - pdev = &omap_i2c_devices[bus_id - 1]; - pdev->id = bus_id; - pdev->name = name; - pdev->num_resources = ARRAY_SIZE(i2c_resources); - res = i2c_resources; - res[0].start = OMAP1_I2C_BASE; - res[0].end = res[0].start + OMAP_I2C_SIZE; - res[0].flags = IORESOURCE_MEM; - res[1].start = OMAP1_INT_I2C; - res[1].flags = IORESOURCE_IRQ; - pdev->resource = res; - - /* all OMAP1 have IP version 1 register set */ - pdata->rev = OMAP_I2C_IP_VERSION_1; - - /* all OMAP1 I2C are implemented like this */ - pdata->flags = OMAP_I2C_FLAG_NO_FIFO | - OMAP_I2C_FLAG_SIMPLE_CLOCK | - OMAP_I2C_FLAG_16BIT_DATA_REG | - OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; - - /* how the cpu bus is wired up differs for 7xx only */ - - if (cpu_is_omap7xx()) - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; - else - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; - - pdev->dev.platform_data = pdata; - - return platform_device_register(pdev); -} diff --git a/trunk/arch/arm/mach-omap1/id.c b/trunk/arch/arm/mach-omap1/id.c index 52de382fc804..a1b846aacdaf 100644 --- a/trunk/arch/arm/mach-omap1/id.c +++ b/trunk/arch/arm/mach-omap1/id.c @@ -17,7 +17,7 @@ #include #include -#include "soc.h" +#include #include diff --git a/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S b/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S index 5c1a26c9f490..2b36a281dc84 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include -#include "serial.h" +#include .pushsection .data omap_uart_phys: .word 0x0 diff --git a/trunk/arch/arm/mach-omap1/include/mach/hardware.h b/trunk/arch/arm/mach-omap1/include/mach/hardware.h index dc3237bd72d2..84248d250adb 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/hardware.h +++ b/trunk/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include #ifndef __ASSEMBLER__ #include -#include "../../mach-omap1/soc.h" +#include /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa); extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); -#include +#include /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -72,7 +72,7 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ -#include +#include /* * --------------------------------------------------------------------------- diff --git a/trunk/arch/arm/mach-omap1/include/mach/memory.h b/trunk/arch/arm/mach-omap1/include/mach/memory.h index 351ae4f2c514..901082def9bd 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/memory.h +++ b/trunk/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include "../../mach-omap1/soc.h" +#include /* * OMAP-1510 Local Bus address offset diff --git a/trunk/arch/arm/mach-omap1/include/mach/omap1510.h b/trunk/arch/arm/mach-omap1/include/mach/omap1510.h index 3d235244bf5c..8fe05d6137c0 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/omap1510.h +++ b/trunk/arch/arm/mach-omap1/include/mach/omap1510.h @@ -45,118 +45,5 @@ #define OMAP1510_DSP_MMU_BASE (0xfffed200) -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) -#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) -#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) -#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/trunk/arch/arm/mach-omap1/include/mach/serial.h b/trunk/arch/arm/mach-omap1/include/mach/serial.h deleted file mode 100644 index 2ce6a2db470b..000000000000 --- a/trunk/arch/arm/mach-omap1/include/mach/serial.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support- Santosh Shilimkar - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include - -/* - * Memory entry used for the DEBUG_LL UART configuration, relative to - * start of RAM. See also uncompress.h and debug-macro.S. - * - * Note that using a memory location for storing the UART configuration - * has at least two limitations: - * - * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the - * uncompress code could then partially overwrite itself - * 2. We assume printascii is called at least once before paging_init, - * and addruart has a chance to read OMAP_UART_INFO - */ -#define OMAP_UART_INFO_OFS 0x3ffc - -/* OMAP1 serial ports */ -#define OMAP1_UART1_BASE 0xfffb0000 -#define OMAP1_UART2_BASE 0xfffb0800 -#define OMAP1_UART3_BASE 0xfffb9800 - -#define OMAP_PORT_SHIFT 2 -#define OMAP7XX_PORT_SHIFT 0 - -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) - -/* - * DEBUG_LL port encoding stored into the UART1 scratchpad register by - * decomp_setup in uncompress.h - */ -#define OMAP1UART1 11 -#define OMAP1UART2 12 -#define OMAP1UART3 13 - -#ifndef __ASSEMBLER__ -extern void omap_serial_init(void); -#endif - -#endif diff --git a/trunk/arch/arm/mach-omap1/include/mach/uncompress.h b/trunk/arch/arm/mach-omap1/include/mach/uncompress.h index ad6fbe7d83f2..0ff22dc075c7 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-omap1/include/mach/uncompress.h @@ -1,122 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Rewritten by: - * Author: - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * arch/arm/mach-omap1/include/mach/uncompress.h */ -#include -#include - -#include -#include - -#include "serial.h" - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - } while (0); -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() +#include diff --git a/trunk/arch/arm/mach-omap1/io.c b/trunk/arch/arm/mach-omap1/io.c index 44389d7cd255..6a5baab1f4cb 100644 --- a/trunk/arch/arm/mach-omap1/io.c +++ b/trunk/arch/arm/mach-omap1/io.c @@ -17,8 +17,8 @@ #include #include -#include -#include +#include +#include #include "iomap.h" #include "common.h" diff --git a/trunk/arch/arm/mach-omap1/irq.c b/trunk/arch/arm/mach-omap1/irq.c index 122ef67939a2..6995fb6a3345 100644 --- a/trunk/arch/arm/mach-omap1/irq.c +++ b/trunk/arch/arm/mach-omap1/irq.c @@ -45,7 +45,7 @@ #include #include -#include "soc.h" +#include #include diff --git a/trunk/arch/arm/mach-omap1/lcd_dma.c b/trunk/arch/arm/mach-omap1/lcd_dma.c index 7ed8c1857d56..ed42628611bc 100644 --- a/trunk/arch/arm/mach-omap1/lcd_dma.c +++ b/trunk/arch/arm/mach-omap1/lcd_dma.c @@ -27,13 +27,11 @@ #include #include -#include +#include #include #include -#include "dma.h" - int omap_lcd_dma_running(void) { /* diff --git a/trunk/arch/arm/mach-omap1/mcbsp.c b/trunk/arch/arm/mach-omap1/mcbsp.c index c6d8fdf92e9c..bdc2e7541adb 100644 --- a/trunk/arch/arm/mach-omap1/mcbsp.c +++ b/trunk/arch/arm/mach-omap1/mcbsp.c @@ -19,15 +19,14 @@ #include #include -#include +#include #include -#include "soc.h" +#include #include #include #include "iomap.h" -#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/trunk/arch/arm/mach-omap1/mmc.h b/trunk/arch/arm/mach-omap1/mmc.h deleted file mode 100644 index 39c2b13de884..000000000000 --- a/trunk/arch/arm/mach-omap1/mmc.h +++ /dev/null @@ -1,18 +0,0 @@ -#include -#include - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -#endif diff --git a/trunk/arch/arm/mach-omap1/opp_data.c b/trunk/arch/arm/mach-omap1/opp_data.c index 8dcebe6d8882..9cd4ddb51397 100644 --- a/trunk/arch/arm/mach-omap1/opp_data.c +++ b/trunk/arch/arm/mach-omap1/opp_data.c @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include "clock.h" +#include #include "opp.h" /*------------------------------------------------------------------------- diff --git a/trunk/arch/arm/mach-omap1/pm.c b/trunk/arch/arm/mach-omap1/pm.c index b2c2328d7c18..47ec16155483 100644 --- a/trunk/arch/arm/mach-omap1/pm.c +++ b/trunk/arch/arm/mach-omap1/pm.c @@ -49,17 +49,17 @@ #include #include -#include +#include +#include +#include +#include #include -#include +#include #include #include -#include "../plat-omap/sram.h" - #include "iomap.h" -#include "clock.h" #include "pm.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; diff --git a/trunk/arch/arm/mach-omap1/pm_bus.c b/trunk/arch/arm/mach-omap1/pm_bus.c index 16bf2f95117c..7868e75ad077 100644 --- a/trunk/arch/arm/mach-omap1/pm_bus.c +++ b/trunk/arch/arm/mach-omap1/pm_bus.c @@ -19,6 +19,9 @@ #include #include +#include +#include + #ifdef CONFIG_PM_RUNTIME static int omap1_pm_runtime_suspend(struct device *dev) { diff --git a/trunk/arch/arm/mach-omap1/serial.c b/trunk/arch/arm/mach-omap1/serial.c index d1ac08016f0b..b9d6834af835 100644 --- a/trunk/arch/arm/mach-omap1/serial.c +++ b/trunk/arch/arm/mach-omap1/serial.c @@ -23,6 +23,7 @@ #include #include +#include #include "pm.h" diff --git a/trunk/arch/arm/mach-omap1/soc.h b/trunk/arch/arm/mach-omap1/soc.h deleted file mode 100644 index 6cf9c1cc2bef..000000000000 --- a/trunk/arch/arm/mach-omap1/soc.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Copyright (C) 2009-11 Texas Instruments. - * - * Written by Tony Lindgren - * - * Added OMAP4/5 specific defines - Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -#ifndef __ASSEMBLY__ - -#include - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 - -/* These are needed to compile common code */ -#ifdef CONFIG_ARCH_OMAP1 -#define cpu_is_omap242x() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap44xx() 0 -#define soc_is_omap54xx() 0 -#define soc_is_am33xx() 0 -#define cpu_class_is_omap1() 1 -#define cpu_class_is_omap2() 0 -#endif - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#endif /* __ASSEMBLY__ */ -#endif diff --git a/trunk/arch/arm/mach-omap2/Makefile b/trunk/arch/arm/mach-omap2/Makefile index 46d9071f0938..fe40d9e488c9 100644 --- a/trunk/arch/arm/mach-omap2/Makefile +++ b/trunk/arch/arm/mach-omap2/Makefile @@ -4,8 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ - omap_device.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o # INTCPS IP block support - XXX should be moved to drivers/ obj-$(CONFIG_ARCH_OMAP2) += irq.o diff --git a/trunk/arch/arm/mach-omap2/am35xx-emac.c b/trunk/arch/arm/mach-omap2/am35xx-emac.c index af11dcdb7e2c..d0c54c573d34 100644 --- a/trunk/arch/arm/mach-omap2/am35xx-emac.c +++ b/trunk/arch/arm/mach-omap2/am35xx-emac.c @@ -18,7 +18,7 @@ #include #include #include -#include "omap_device.h" +#include #include "am35xx.h" #include "control.h" #include "am35xx-emac.h" diff --git a/trunk/arch/arm/mach-omap2/board-2430sdp.c b/trunk/arch/arm/mach-omap2/board-2430sdp.c index 49e49d0b7cf5..df561adbed76 100644 --- a/trunk/arch/arm/mach-omap2/board-2430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-2430sdp.c @@ -34,8 +34,7 @@ #include #include "common.h" -#include "gpmc.h" -#include +#include #include "gpmc-smc91x.h" #include