diff --git a/[refs] b/[refs] index 122e9f95318b..9279e68e6134 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: f3d88244dbaf0ba5e4c719f6d5c1a263e85e6bd6 +refs/heads/master: 9ed76e0336988ecc9e7234e0bd49be4fd98f6c35 diff --git a/trunk/Documentation/IRQ-domain.txt b/trunk/Documentation/IRQ-domain.txt deleted file mode 100644 index 27dcaabfb4db..000000000000 --- a/trunk/Documentation/IRQ-domain.txt +++ /dev/null @@ -1,117 +0,0 @@ -irq_domain interrupt number mapping library - -The current design of the Linux kernel uses a single large number -space where each separate IRQ source is assigned a different number. -This is simple when there is only one interrupt controller, but in -systems with multiple interrupt controllers the kernel must ensure -that each one gets assigned non-overlapping allocations of Linux -IRQ numbers. - -The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of -irq numbers, but they don't provide any support for reverse mapping of -the controller-local IRQ (hwirq) number into the Linux IRQ number -space. - -The irq_domain library adds mapping between hwirq and IRQ numbers on -top of the irq_alloc_desc*() API. An irq_domain to manage mapping is -preferred over interrupt controller drivers open coding their own -reverse mapping scheme. - -irq_domain also implements translation from Device Tree interrupt -specifiers to hwirq numbers, and can be easily extended to support -other IRQ topology data sources. - -=== irq_domain usage === -An interrupt controller driver creates and registers an irq_domain by -calling one of the irq_domain_add_*() functions (each mapping method -has a different allocator function, more on that later). The function -will return a pointer to the irq_domain on success. The caller must -provide the allocator function with an irq_domain_ops structure with -the .map callback populated as a minimum. - -In most cases, the irq_domain will begin empty without any mappings -between hwirq and IRQ numbers. Mappings are added to the irq_domain -by calling irq_create_mapping() which accepts the irq_domain and a -hwirq number as arguments. If a mapping for the hwirq doesn't already -exist then it will allocate a new Linux irq_desc, associate it with -the hwirq, and call the .map() callback so the driver can perform any -required hardware setup. - -When an interrupt is received, irq_find_mapping() function should -be used to find the Linux IRQ number from the hwirq number. - -If the driver has the Linux IRQ number or the irq_data pointer, and -needs to know the associated hwirq number (such as in the irq_chip -callbacks) then it can be directly obtained from irq_data->hwirq. - -=== Types of irq_domain mappings === -There are several mechanisms available for reverse mapping from hwirq -to Linux irq, and each mechanism uses a different allocation function. -Which reverse map type should be used depends on the use case. Each -of the reverse map types are described below: - -==== Linear ==== -irq_domain_add_linear() - -The linear reverse map maintains a fixed size table indexed by the -hwirq number. When a hwirq is mapped, an irq_desc is allocated for -the hwirq, and the IRQ number is stored in the table. - -The Linear map is a good choice when the maximum number of hwirqs is -fixed and a relatively small number (~ < 256). The advantages of this -map are fixed time lookup for IRQ numbers, and irq_descs are only -allocated for in-use IRQs. The disadvantage is that the table must be -as large as the largest possible hwirq number. - -The majority of drivers should use the linear map. - -==== Tree ==== -irq_domain_add_tree() - -The irq_domain maintains a radix tree map from hwirq numbers to Linux -IRQs. When an hwirq is mapped, an irq_desc is allocated and the -hwirq is used as the lookup key for the radix tree. - -The tree map is a good choice if the hwirq number can be very large -since it doesn't need to allocate a table as large as the largest -hwirq number. The disadvantage is that hwirq to IRQ number lookup is -dependent on how many entries are in the table. - -Very few drivers should need this mapping. At the moment, powerpc -iseries is the only user. - -==== No Map ===- -irq_domain_add_nomap() - -The No Map mapping is to be used when the hwirq number is -programmable in the hardware. In this case it is best to program the -Linux IRQ number into the hardware itself so that no mapping is -required. Calling irq_create_direct_mapping() will allocate a Linux -IRQ number and call the .map() callback so that driver can program the -Linux IRQ number into the hardware. - -Most drivers cannot use this mapping. - -==== Legacy ==== -irq_domain_add_legacy() -irq_domain_add_legacy_isa() - -The Legacy mapping is a special case for drivers that already have a -range of irq_descs allocated for the hwirqs. It is used when the -driver cannot be immediately converted to use the linear mapping. For -example, many embedded system board support files use a set of #defines -for IRQ numbers that are passed to struct device registrations. In that -case the Linux IRQ numbers cannot be dynamically assigned and the legacy -mapping should be used. - -The legacy map assumes a contiguous range of IRQ numbers has already -been allocated for the controller and that the IRQ number can be -calculated by adding a fixed offset to the hwirq number, and -visa-versa. The disadvantage is that it requires the interrupt -controller to manage IRQ allocations and it requires an irq_desc to be -allocated for every hwirq, even if it is unused. - -The legacy map should only be used if fixed IRQ mappings must be -supported. For example, ISA controllers would use the legacy map for -mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ -numbers. diff --git a/trunk/Documentation/devicetree/bindings/arm/tegra/emc.txt b/trunk/Documentation/devicetree/bindings/arm/tegra/emc.txt deleted file mode 100644 index 09335f8eee00..000000000000 --- a/trunk/Documentation/devicetree/bindings/arm/tegra/emc.txt +++ /dev/null @@ -1,100 +0,0 @@ -Embedded Memory Controller - -Properties: -- name : Should be emc -- #address-cells : Should be 1 -- #size-cells : Should be 0 -- compatible : Should contain "nvidia,tegra20-emc". -- reg : Offset and length of the register set for the device -- nvidia,use-ram-code : If present, the sub-nodes will be addressed - and chosen using the ramcode board selector. If omitted, only one - set of tables can be present and said tables will be used - irrespective of ram-code configuration. - -Child device nodes describe the memory settings for different configurations and clock rates. - -Example: - - emc@7000f400 { - #address-cells = < 1 >; - #size-cells = < 0 >; - compatible = "nvidia,tegra20-emc"; - reg = <0x7000f4000 0x200>; - } - - -Embedded Memory Controller ram-code table - -If the emc node has the nvidia,use-ram-code property present, then the -next level of nodes below the emc table are used to specify which settings -apply for which ram-code settings. - -If the emc node lacks the nvidia,use-ram-code property, this level is omitted -and the tables are stored directly under the emc node (see below). - -Properties: - -- name : Should be emc-tables -- nvidia,ram-code : the binary representation of the ram-code board strappings - for which this node (and children) are valid. - - - -Embedded Memory Controller configuration table - -This is a table containing the EMC register settings for the various -operating speeds of the memory controller. They are always located as -subnodes of the emc controller node. - -There are two ways of specifying which tables to use: - -* The simplest is if there is just one set of tables in the device tree, - and they will always be used (based on which frequency is used). - This is the preferred method, especially when firmware can fill in - this information based on the specific system information and just - pass it on to the kernel. - -* The slightly more complex one is when more than one memory configuration - might exist on the system. The Tegra20 platform handles this during - early boot by selecting one out of possible 4 memory settings based - on a 2-pin "ram code" bootstrap setting on the board. The values of - these strappings can be read through a register in the SoC, and thus - used to select which tables to use. - -Properties: -- name : Should be emc-table -- compatible : Should contain "nvidia,tegra20-emc-table". -- reg : either an opaque enumerator to tell different tables apart, or - the valid frequency for which the table should be used (in kHz). -- clock-frequency : the clock frequency for the EMC at which this - table should be used (in kHz). -- nvidia,emc-registers : a 46 word array of EMC registers to be programmed - for operation at the 'clock-frequency' setting. - The order and contents of the registers are: - RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT, - WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR, - PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW, - TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE, - ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE, - ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0, - CFG_CLKTRIM_1, CFG_CLKTRIM_2 - - emc-table@166000 { - reg = <166000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 166000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; - - emc-table@333000 { - reg = <333000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 333000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; diff --git a/trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt deleted file mode 100644 index b5846e21cc2e..000000000000 --- a/trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ /dev/null @@ -1,19 +0,0 @@ -NVIDIA Tegra Power Management Controller (PMC) - -Properties: -- name : Should be pmc -- compatible : Should contain "nvidia,tegra-pmc". -- reg : Offset and length of the register set for the device -- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. - The PMU is an external Power Management Unit, whose interrupt output - signal is fed into the PMC. This signal is optionally inverted, and then - fed into the ARM GIC. The PMC is not involved in the detection or - handling of this interrupt signal, merely its inversion. - -Example: - -pmc@7000f400 { - compatible = "nvidia,tegra20-pmc"; - reg = <0x7000e400 0x400>; - nvidia,invert-interrupt; -}; diff --git a/trunk/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/trunk/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt deleted file mode 100644 index 90fa7da525b8..000000000000 --- a/trunk/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt +++ /dev/null @@ -1,30 +0,0 @@ -* NVIDIA Tegra APB DMA controller - -Required properties: -- compatible: Should be "nvidia,-apbdma" -- reg: Should contain DMA registers location and length. This shuld include - all of the per-channel registers. -- interrupts: Should contain all of the per-channel DMA interrupts. - -Examples: - -apbdma: dma@6000a000 { - compatible = "nvidia,tegra20-apbdma"; - reg = <0x6000a000 0x1200>; - interrupts = < 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04 - 0 144 0x04 - 0 145 0x04 - 0 146 0x04 - 0 147 0x04 - 0 148 0x04 - 0 149 0x04 - 0 150 0x04 - 0 151 0x04 >; -}; diff --git a/trunk/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/trunk/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index 023c9526e5f8..eb4b530d64e1 100644 --- a/trunk/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/trunk/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -1,40 +1,8 @@ -NVIDIA Tegra GPIO controller +NVIDIA Tegra 2 GPIO controller Required properties: -- compatible : "nvidia,tegra-gpio" -- reg : Physical base address and length of the controller's registers. -- interrupts : The interrupt outputs from the controller. For Tegra20, - there should be 7 interrupts specified, and for Tegra30, there should - be 8 interrupts specified. +- compatible : "nvidia,tegra20-gpio" - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - gpio-controller : Marks the device node as a GPIO controller. -- #interrupt-cells : Should be 2. - The first cell is the GPIO number. - The second cell is used to specify flags: - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. - Valid combinations are 1, 2, 3, 4, 8. -- interrupt-controller : Marks the device node as an interrupt controller. - -Example: - -gpio: gpio@6000d000 { - compatible = "nvidia,tegra20-gpio"; - reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 >; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; -}; diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt index 1bea46a54b1c..a0ffac029a0d 100644 --- a/trunk/Documentation/feature-removal-schedule.txt +++ b/trunk/Documentation/feature-removal-schedule.txt @@ -510,3 +510,17 @@ Why: The pci_scan_bus_parented() interface creates a new root bus. The convert to using pci_scan_root_bus() so they can supply a list of bus resources when the bus is created. Who: Bjorn Helgaas + +---------------------------- + +What: The CAP9 SoC family will be removed +When: 3.4 +Files: arch/arm/mach-at91/at91cap9.c + arch/arm/mach-at91/at91cap9_devices.c + arch/arm/mach-at91/include/mach/at91cap9.h + arch/arm/mach-at91/include/mach/at91cap9_matrix.h + arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h + arch/arm/mach-at91/board-cap9adk.c +Why: The code is not actively maintained and platforms are now hard to find. +Who: Nicolas Ferre + Jean-Christophe PLAGNIOL-VILLARD diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index f096b0d8e973..4e41d5255d72 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -3638,15 +3638,6 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core F: kernel/irq/ -IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) -M: Benjamin Herrenschmidt -M: Grant Likely -T: git git://git.secretlab.ca/git/linux-2.6.git irqdomain/next -S: Maintained -F: Documentation/IRQ-domain.txt -F: include/linux/irqdomain.h -F: kernel/irq/irqdomain.c - ISAPNP M: Jaroslav Kysela S: Maintained diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index baf6dc6e9a1b..a48aecc17eac 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -324,7 +324,7 @@ config ARCH_AT91 select CLKDEV_LOOKUP help This enables support for systems based on the Atmel AT91RM9200, - AT91SAM9 processors. + AT91SAM9 and AT91CAP9 processors. config ARCH_BCMRING bool "Broadcom BCMRING" @@ -754,7 +754,7 @@ config ARCH_SA1100 select ARCH_HAS_CPUFREQ select CPU_FREQ select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select HAVE_CLK select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB diff --git a/trunk/arch/arm/Kconfig.debug b/trunk/arch/arm/Kconfig.debug index 66ca8014ff3e..03646c4c13d1 100644 --- a/trunk/arch/arm/Kconfig.debug +++ b/trunk/arch/arm/Kconfig.debug @@ -86,7 +86,7 @@ choice depends on HAVE_AT91_DBGU0 config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263 and 9g45" + bool "Kernel low-level debugging on 9263, 9g45 and cap9" depends on HAVE_AT91_DBGU1 config DEBUG_CLPS711X_UART1 @@ -180,12 +180,12 @@ choice Say Y here if you want kernel low-level debugging support on i.MX50 or i.MX53. - config DEBUG_IMX6Q_UART4 - bool "i.MX6Q Debug UART4" + config DEBUG_IMX6Q_UART + bool "i.MX6Q Debug UART" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q UART4. + on i.MX6Q. config DEBUG_MSM_UART1 bool "Kernel low-level debugging messages via MSM UART1" diff --git a/trunk/arch/arm/boot/dts/tegra-harmony.dts b/trunk/arch/arm/boot/dts/tegra-harmony.dts index 6e8447dc0202..80afa1b70b80 100644 --- a/trunk/arch/arm/boot/dts/tegra-harmony.dts +++ b/trunk/arch/arm/boot/dts/tegra-harmony.dts @@ -10,25 +10,19 @@ reg = < 0x00000000 0x40000000 >; }; - pmc@7000f400 { - nvidia,invert-interrupt; - }; - i2c@7000c000 { clock-frequency = <400000>; - wm8903: wm8903@1a { + codec: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; + interrupts = < 347 >; gpio-controller; #gpio-cells = <2>; - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + /* 0x8000 = Not configured */ + gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >; }; }; @@ -44,32 +38,13 @@ clock-frequency = <400000>; }; - i2s@70002a00 { - status = "disable"; - }; - sound { - compatible = "nvidia,tegra-audio-wm8903-harmony", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "NVIDIA Tegra Harmony"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ - nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903"; + + spkr-en-gpios = <&codec 2 0>; + hp-det-gpios = <&gpio 178 0>; + int-mic-en-gpios = <&gpio 184 0>; + ext-mic-en-gpios = <&gpio 185 0>; }; serial@70006000 { diff --git a/trunk/arch/arm/boot/dts/tegra-paz00.dts b/trunk/arch/arm/boot/dts/tegra-paz00.dts index e4b552b46fe2..825d2957da0b 100644 --- a/trunk/arch/arm/boot/dts/tegra-paz00.dts +++ b/trunk/arch/arm/boot/dts/tegra-paz00.dts @@ -12,13 +12,6 @@ i2c@7000c000 { clock-frequency = <400000>; - - alc5632: alc5632@1e { - compatible = "realtek,alc5632"; - reg = <0x1e>; - gpio-controller; - #gpio-cells = <2>; - }; }; i2c@7000c400 { @@ -44,29 +37,6 @@ clock-frequency = <400000>; }; - i2s@70002a00 { - status = "disable"; - }; - - sound { - compatible = "nvidia,tegra-audio-alc5632-paz00", - "nvidia,tegra-audio-alc5632"; - - nvidia,model = "Compal PAZ00"; - - nvidia,audio-routing = - "Int Spk", "SPKOUT", - "Int Spk", "SPKOUTN", - "Headset Mic", "MICBIAS1", - "MIC1", "Headset Mic", - "Headset Stereophone", "HPR", - "Headset Stereophone", "HPL"; - - nvidia,audio-codec = <&alc5632>; - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - }; - serial@70006000 { clock-frequency = <216000000>; }; diff --git a/trunk/arch/arm/boot/dts/tegra-seaboard.dts b/trunk/arch/arm/boot/dts/tegra-seaboard.dts index 876d5c92ce36..b55a02e34ba7 100644 --- a/trunk/arch/arm/boot/dts/tegra-seaboard.dts +++ b/trunk/arch/arm/boot/dts/tegra-seaboard.dts @@ -13,20 +13,6 @@ i2c@7000c000 { clock-frequency = <400000>; - - wm8903: wm8903@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; - }; }; i2c@7000c400 { @@ -46,32 +32,6 @@ }; }; - i2s@70002a00 { - status = "disable"; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8903-seaboard", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "NVIDIA Tegra Seaboard"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1R", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ - }; - serial@70006000 { status = "disable"; }; @@ -133,42 +93,4 @@ gpio-key,wakeup; }; }; - - emc@7000f400 { - emc-table@190000 { - reg = < 190000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 190000 >; - nvidia,emc-registers = < 0x0000000c 0x00000026 - 0x00000009 0x00000003 0x00000004 0x00000004 - 0x00000002 0x0000000c 0x00000003 0x00000003 - 0x00000002 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x0000059f - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000003 0x00000001 0x0000000b 0x000000c8 - 0x00000003 0x00000007 0x00000004 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xa06204ae - 0x007dc010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - - emc-table@380000 { - reg = < 380000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 380000 >; - nvidia,emc-registers = < 0x00000017 0x0000004b - 0x00000012 0x00000006 0x00000004 0x00000005 - 0x00000003 0x0000000c 0x00000006 0x00000006 - 0x00000003 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x00000b5f - 0x00000000 0x00000003 0x00000003 0x00000006 - 0x00000006 0x00000001 0x00000011 0x000000c8 - 0x00000003 0x0000000e 0x00000007 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xe044048b - 0x007d8010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - }; }; diff --git a/trunk/arch/arm/boot/dts/tegra-trimslice.dts b/trunk/arch/arm/boot/dts/tegra-trimslice.dts index 252476867b54..3b3ee7db99f3 100644 --- a/trunk/arch/arm/boot/dts/tegra-trimslice.dts +++ b/trunk/arch/arm/boot/dts/tegra-trimslice.dts @@ -26,18 +26,6 @@ status = "disable"; }; - i2s@70002800 { - status = "disable"; - }; - - i2s@70002a00 { - status = "disable"; - }; - - das@70000c00 { - status = "disable"; - }; - serial@70006000 { clock-frequency = < 216000000 >; }; diff --git a/trunk/arch/arm/boot/dts/tegra-ventana.dts b/trunk/arch/arm/boot/dts/tegra-ventana.dts index 2dcff8728e90..c7d3b87f29df 100644 --- a/trunk/arch/arm/boot/dts/tegra-ventana.dts +++ b/trunk/arch/arm/boot/dts/tegra-ventana.dts @@ -12,20 +12,6 @@ i2c@7000c000 { clock-frequency = <400000>; - - wm8903: wm8903@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; - }; }; i2c@7000c400 { @@ -40,34 +26,6 @@ clock-frequency = <400000>; }; - i2s@70002a00 { - status = "disable"; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8903-ventana", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "NVIDIA Tegra Ventana"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ - nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ - }; - serial@70006000 { status = "disable"; }; diff --git a/trunk/arch/arm/boot/dts/tegra20.dtsi b/trunk/arch/arm/boot/dts/tegra20.dtsi index ec1f0101c79c..3da7afd45322 100644 --- a/trunk/arch/arm/boot/dts/tegra20.dtsi +++ b/trunk/arch/arm/boot/dts/tegra20.dtsi @@ -4,11 +4,6 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; - pmc@7000f400 { - compatible = "nvidia,tegra20-pmc"; - reg = <0x7000e400 0x400>; - }; - intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -17,27 +12,6 @@ < 0x50040100 0x0100 >; }; - apbdma: dma@6000a000 { - compatible = "nvidia,tegra20-apbdma"; - reg = <0x6000a000 0x1200>; - interrupts = < 0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 >; - }; - i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; @@ -70,18 +44,18 @@ interrupts = < 0 53 0x04 >; }; - tegra_i2s1: i2s@70002800 { + i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; interrupts = < 0 13 0x04 >; - nvidia,dma-request-selector = < &apbdma 2 >; + dma-channel = < 2 >; }; - tegra_i2s2: i2s@70002a00 { + i2s@70002a00 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002a00 0x200>; interrupts = < 0 3 0x04 >; - nvidia,dma-request-selector = < &apbdma 1 >; + dma-channel = < 1 >; }; das@70000c00 { @@ -101,8 +75,6 @@ 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; }; pinmux: pinmux@70000000 { @@ -148,13 +120,6 @@ interrupts = < 0 91 0x04 >; }; - emc@7000f400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-emc"; - reg = <0x7000f400 0x200>; - }; - sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; diff --git a/trunk/arch/arm/boot/dts/tegra30.dtsi b/trunk/arch/arm/boot/dts/tegra30.dtsi index ac4b75cb26c0..ee7db9892e02 100644 --- a/trunk/arch/arm/boot/dts/tegra30.dtsi +++ b/trunk/arch/arm/boot/dts/tegra30.dtsi @@ -4,11 +4,6 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; - pmc@7000f400 { - compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; - reg = <0x7000e400 0x400>; - }; - intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -17,43 +12,6 @@ < 0x50040100 0x0100 >; }; - apbdma: dma@6000a000 { - compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; - reg = <0x6000a000 0x1400>; - interrupts = < 0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04 >; - }; - i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; @@ -97,18 +55,9 @@ gpio: gpio@6000d000 { compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 - 0 125 0x04 >; + interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; }; serial@70006000 { diff --git a/trunk/arch/arm/common/gic.c b/trunk/arch/arm/common/gic.c index f0783be17352..c47d6199b784 100644 --- a/trunk/arch/arm/common/gic.c +++ b/trunk/arch/arm/common/gic.c @@ -51,6 +51,7 @@ union gic_base { }; struct gic_chip_data { + unsigned int irq_offset; union gic_base dist_base; union gic_base cpu_base; #ifdef CONFIG_CPU_PM @@ -60,7 +61,9 @@ struct gic_chip_data { u32 __percpu *saved_ppi_enable; u32 __percpu *saved_ppi_conf; #endif - struct irq_domain *domain; +#ifdef CONFIG_IRQ_DOMAIN + struct irq_domain domain; +#endif unsigned int gic_irqs; #ifdef CONFIG_GIC_NON_BANKED void __iomem *(*get_base)(union gic_base *); @@ -279,7 +282,7 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) irqnr = irqstat & ~0x1c00; if (likely(irqnr > 15 && irqnr < 1021)) { - irqnr = irq_find_mapping(gic->domain, irqnr); + irqnr = irq_domain_to_irq(&gic->domain, irqnr); handle_IRQ(irqnr, regs); continue; } @@ -311,8 +314,8 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) if (gic_irq == 1023) goto out; - cascade_irq = irq_find_mapping(chip_data->domain, gic_irq); - if (unlikely(gic_irq < 32 || gic_irq > 1020)) + cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq); + if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS)) do_bad_IRQ(cascade_irq, desc); else generic_handle_irq(cascade_irq); @@ -345,9 +348,10 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) static void __init gic_dist_init(struct gic_chip_data *gic) { - unsigned int i; + unsigned int i, irq; u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; + struct irq_domain *domain = &gic->domain; void __iomem *base = gic_data_dist_base(gic); u32 cpu = cpu_logical_map(smp_processor_id()); @@ -382,6 +386,23 @@ static void __init gic_dist_init(struct gic_chip_data *gic) for (i = 32; i < gic_irqs; i += 32) writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + /* + * Setup the Linux IRQ subsystem. + */ + irq_domain_for_each_irq(domain, i, irq) { + if (i < 32) { + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, &gic_chip, + handle_percpu_devid_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); + } else { + irq_set_chip_and_handler(irq, &gic_chip, + handle_fasteoi_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + irq_set_chip_data(irq, gic); + } + writel_relaxed(1, base + GIC_DIST_CTRL); } @@ -597,27 +618,11 @@ static void __init gic_pm_init(struct gic_chip_data *gic) } #endif -static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - if (hw < 32) { - irq_set_percpu_devid(irq); - irq_set_chip_and_handler(irq, &gic_chip, - handle_percpu_devid_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); - } else { - irq_set_chip_and_handler(irq, &gic_chip, - handle_fasteoi_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - irq_set_chip_data(irq, d->host_data); - return 0; -} - -static int gic_irq_domain_xlate(struct irq_domain *d, - struct device_node *controller, - const u32 *intspec, unsigned int intsize, - unsigned long *out_hwirq, unsigned int *out_type) +#ifdef CONFIG_OF +static int gic_irq_domain_dt_translate(struct irq_domain *d, + struct device_node *controller, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) { if (d->of_node != controller) return -EINVAL; @@ -634,23 +639,26 @@ static int gic_irq_domain_xlate(struct irq_domain *d, *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK; return 0; } +#endif const struct irq_domain_ops gic_irq_domain_ops = { - .map = gic_irq_domain_map, - .xlate = gic_irq_domain_xlate, +#ifdef CONFIG_OF + .dt_translate = gic_irq_domain_dt_translate, +#endif }; void __init gic_init_bases(unsigned int gic_nr, int irq_start, void __iomem *dist_base, void __iomem *cpu_base, - u32 percpu_offset, struct device_node *node) + u32 percpu_offset) { - irq_hw_number_t hwirq_base; struct gic_chip_data *gic; - int gic_irqs, irq_base; + struct irq_domain *domain; + int gic_irqs; BUG_ON(gic_nr >= MAX_GIC_NR); gic = &gic_data[gic_nr]; + domain = &gic->domain; #ifdef CONFIG_GIC_NON_BANKED if (percpu_offset) { /* Frankein-GIC without banked registers... */ unsigned int cpu; @@ -686,10 +694,10 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ - hwirq_base = 32; + domain->hwirq_base = 32; if (gic_nr == 0) { if ((irq_start & 31) > 0) { - hwirq_base = 16; + domain->hwirq_base = 16; if (irq_start != -1) irq_start = (irq_start & ~31) + 16; } @@ -705,17 +713,17 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, gic_irqs = 1020; gic->gic_irqs = gic_irqs; - gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */ - irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id()); - if (IS_ERR_VALUE(irq_base)) { + domain->nr_irq = gic_irqs - domain->hwirq_base; + domain->irq_base = irq_alloc_descs(irq_start, 16, domain->nr_irq, + numa_node_id()); + if (IS_ERR_VALUE(domain->irq_base)) { WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n", irq_start); - irq_base = irq_start; + domain->irq_base = irq_start; } - gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base, - hwirq_base, &gic_irq_domain_ops, gic); - if (WARN_ON(!gic->domain)) - return; + domain->priv = gic; + domain->ops = &gic_irq_domain_ops; + irq_domain_add(domain); gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic); @@ -760,6 +768,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) void __iomem *dist_base; u32 percpu_offset; int irq; + struct irq_domain *domain = &gic_data[gic_cnt].domain; if (WARN_ON(!node)) return -ENODEV; @@ -773,7 +782,9 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) if (of_property_read_u32(node, "cpu-offset", &percpu_offset)) percpu_offset = 0; - gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node); + domain->of_node = of_node_get(node); + + gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset); if (parent) { irq = irq_of_parse_and_map(node, 0); diff --git a/trunk/arch/arm/common/vic.c b/trunk/arch/arm/common/vic.c index 7a66311f3066..dcb004a804c7 100644 --- a/trunk/arch/arm/common/vic.c +++ b/trunk/arch/arm/common/vic.c @@ -56,7 +56,7 @@ struct vic_device { u32 int_enable; u32 soft_int; u32 protect; - struct irq_domain *domain; + struct irq_domain domain; }; /* we cannot allocate memory when VICs are initially registered */ @@ -192,8 +192,14 @@ static void __init vic_register(void __iomem *base, unsigned int irq, v->resume_sources = resume_sources; v->irq = irq; vic_id++; - v->domain = irq_domain_add_legacy(node, 32, irq, 0, - &irq_domain_simple_ops, v); + + v->domain.irq_base = irq; + v->domain.nr_irq = 32; +#ifdef CONFIG_OF_IRQ + v->domain.of_node = of_node_get(node); +#endif /* CONFIG_OF */ + v->domain.ops = &irq_domain_simple_ops; + irq_domain_add(&v->domain); } static void vic_ack_irq(struct irq_data *d) @@ -342,7 +348,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, vic_register(base, irq_start, 0, node); } -void __init __vic_init(void __iomem *base, unsigned int irq_start, +static void __init __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node) { @@ -438,7 +444,7 @@ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); while (stat) { irq = ffs(stat) - 1; - handle_IRQ(irq_find_mapping(vic->domain, irq), regs); + handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs); stat &= ~(1 << irq); handled = 1; } diff --git a/trunk/arch/arm/configs/at91cap9_defconfig b/trunk/arch/arm/configs/at91cap9_defconfig new file mode 100644 index 000000000000..8826eb218e73 --- /dev/null +++ b/trunk/arch/arm/configs/at91cap9_defconfig @@ -0,0 +1,108 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91CAP9=y +CONFIG_MACH_AT91CAP9ADK=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" +CONFIG_FPE_NWFPE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_SERIO is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y diff --git a/trunk/arch/arm/configs/imx_v4_v5_defconfig b/trunk/arch/arm/configs/imx_v4_v5_defconfig index d9eddfd77428..a22e93079063 100644 --- a/trunk/arch/arm/configs/imx_v4_v5_defconfig +++ b/trunk/arch/arm/configs/imx_v4_v5_defconfig @@ -45,7 +45,6 @@ CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_PM_DEBUG=y CONFIG_NET=y -CONFIG_SMSC911X=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y @@ -79,8 +78,6 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y -CONFIG_CS89x0=y -CONFIG_CS89x0_PLATFORM=y CONFIG_DM9000=y CONFIG_SMC91X=y CONFIG_SMC911X=y @@ -118,21 +115,6 @@ CONFIG_FB_IMX=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_L4F00242T03=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_MEDIA=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF_DMA_CONTIG=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_OV2640=y -CONFIG_VIDEO_MX2_HOSTSUPPORT=y -CONFIG_VIDEO_MX2=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y diff --git a/trunk/arch/arm/configs/imx_v6_v7_defconfig b/trunk/arch/arm/configs/imx_v6_v7_defconfig index 6ae457aeea49..3a4fb2e5fc68 100644 --- a/trunk/arch/arm/configs/imx_v6_v7_defconfig +++ b/trunk/arch/arm/configs/imx_v6_v7_defconfig @@ -26,6 +26,7 @@ CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_KZM_ARM11_01=y CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y @@ -81,9 +82,8 @@ CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CHELSIO is not set -CONFIG_CS89x0=y -CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_FEC=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set @@ -126,39 +126,7 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y -CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEOBUF2_MEMOPS=y -CONFIG_VIDEOBUF2_DMA_CONTIG=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_OV2640=y -CONFIG_MX3_VIDEO=y -CONFIG_VIDEO_MX3=y -CONFIG_FB=y -CONFIG_FB_MX3=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_L4F00242T03=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y diff --git a/trunk/arch/arm/configs/magician_defconfig b/trunk/arch/arm/configs/magician_defconfig index a691ef4c6008..443675d317e6 100644 --- a/trunk/arch/arm/configs/magician_defconfig +++ b/trunk/arch/arm/configs/magician_defconfig @@ -101,7 +101,7 @@ CONFIG_MFD_ASIC3=y CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y CONFIG_REGULATOR=y -CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_BQ24022=y CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_OVERLAY=y diff --git a/trunk/arch/arm/include/asm/hardware/gic.h b/trunk/arch/arm/include/asm/hardware/gic.h index 4b1ce6cd477f..4bdfe0018696 100644 --- a/trunk/arch/arm/include/asm/hardware/gic.h +++ b/trunk/arch/arm/include/asm/hardware/gic.h @@ -39,7 +39,7 @@ struct device_node; extern struct irq_chip gic_arch_extn; void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, - u32 offset, struct device_node *); + u32 offset); int gic_of_init(struct device_node *node, struct device_node *parent); void gic_secondary_init(unsigned int); void gic_handle_irq(struct pt_regs *regs); @@ -49,7 +49,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); static inline void gic_init(unsigned int nr, int start, void __iomem *dist , void __iomem *cpu) { - gic_init_bases(nr, start, dist, cpu, 0, NULL); + gic_init_bases(nr, start, dist, cpu, 0); } #endif diff --git a/trunk/arch/arm/include/asm/hardware/vic.h b/trunk/arch/arm/include/asm/hardware/vic.h index e14af1a1a320..f42ebd619590 100644 --- a/trunk/arch/arm/include/asm/hardware/vic.h +++ b/trunk/arch/arm/include/asm/hardware/vic.h @@ -47,8 +47,6 @@ struct device_node; struct pt_regs; -void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, - u32 resume_sources, struct device_node *node); void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); int vic_of_init(struct device_node *node, struct device_node *parent); void vic_handle_irq(struct pt_regs *regs); diff --git a/trunk/arch/arm/mach-at91/Kconfig b/trunk/arch/arm/mach-at91/Kconfig index 0284e66c47f9..71feb00a1e99 100644 --- a/trunk/arch/arm/mach-at91/Kconfig +++ b/trunk/arch/arm/mach-at91/Kconfig @@ -102,6 +102,15 @@ config ARCH_AT91SAM9G45 select HAVE_AT91_DBGU1 select AT91_SAM9G45_RESET +config ARCH_AT91CAP9 + bool "AT91CAP9" + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL + select HAVE_NET_MACB + select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET + config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -438,6 +447,21 @@ endif # ---------------------------------------------------------- +if ARCH_AT91CAP9 + +comment "AT91CAP9 Board Type" + +config MACH_AT91CAP9ADK + bool "Atmel AT91CAP9A-DK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. + + +endif + +# ---------------------------------------------------------- + if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -520,7 +544,7 @@ config AT91_EARLY_DBGU0 depends on HAVE_AT91_DBGU0 config AT91_EARLY_DBGU1 - bool "DBGU on 9263 and 9g45" + bool "DBGU on 9263, 9g45 and cap9" depends on HAVE_AT91_DBGU1 config AT91_EARLY_USART0 diff --git a/trunk/arch/arm/mach-at91/Makefile b/trunk/arch/arm/mach-at91/Makefile index aeb76f1690d9..705e1fbded39 100644 --- a/trunk/arch/arm/mach-at91/Makefile +++ b/trunk/arch/arm/mach-at91/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_d obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -80,6 +81,9 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o +# AT91CAP9 board-specific support +obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o + # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/trunk/arch/arm/mach-at91/Makefile.boot b/trunk/arch/arm/mach-at91/Makefile.boot index 2fd051eb2449..8ddafadfdc7d 100644 --- a/trunk/arch/arm/mach-at91/Makefile.boot +++ b/trunk/arch/arm/mach-at91/Makefile.boot @@ -3,7 +3,11 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) +ifeq ($(CONFIG_ARCH_AT91CAP9),y) + zreladdr-y += 0x70008000 +params_phys-y := 0x70000100 +initrd_phys-y := 0x70410000 +else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 diff --git a/trunk/arch/arm/mach-at91/at91cap9.c b/trunk/arch/arm/mach-at91/at91cap9.c new file mode 100644 index 000000000000..8967d75c2ea3 --- /dev/null +++ b/trunk/arch/arm/mach-at91/at91cap9.c @@ -0,0 +1,404 @@ +/* + * arch/arm/mach-at91/at91cap9.c + * + * Copyright (C) 2007 Stelian Pop + * Copyright (C) 2007 Lead Tech Design + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include "soc.h" +#include "generic.h" +#include "clock.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioABCD_clk = { + .name = "pioABCD_clk", + .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb0_clk = { + .name = "mpb0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb1_clk = { + .name = "mpb1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb2_clk = { + .name = "mpb2_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb3_clk = { + .name = "mpb3_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb4_clk = { + .name = "mpb4_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB4, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91CAP9_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91CAP9_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91CAP9_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk can_clk = { + .name = "can_clk", + .pmc_mask = 1 << AT91CAP9_ID_CAN, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91CAP9_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc0_clk = { + .name = "ssc0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc1_clk = { + .name = "ssc1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ac97_clk = { + .name = "ac97_clk", + .pmc_mask = 1 << AT91CAP9_ID_AC97C, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91CAP9_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwm_clk = { + .name = "pwm_clk", + .pmc_mask = 1 << AT91CAP9_ID_PWMC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk macb_clk = { + .name = "pclk", + .pmc_mask = 1 << AT91CAP9_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk aestdes_clk = { + .name = "aestdes_clk", + .pmc_mask = 1 << AT91CAP9_ID_AESTDES, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91CAP9_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91CAP9_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91CAP9_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma_clk = { + .name = "dma_clk", + .pmc_mask = 1 << AT91CAP9_ID_DMA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91CAP9_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91CAP9_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioABCD_clk, + &mpb0_clk, + &mpb1_clk, + &mpb2_clk, + &mpb3_clk, + &mpb4_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &mmc0_clk, + &mmc1_clk, + &can_clk, + &twi_clk, + &spi0_clk, + &spi1_clk, + &ssc0_clk, + &ssc1_clk, + &ac97_clk, + &tcb_clk, + &pwm_clk, + &macb_clk, + &aestdes_clk, + &adc_clk, + &isi_clk, + &lcdc_clk, + &dma_clk, + &udphs_clk, + &ohci_clk, + // irq0 .. irq1 +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for macb_hclk */ + CLKDEV_CON_ID("hclk", &macb_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + /* fake hclk clock */ + CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), + CLKDEV_CON_ID("pioA", &pioABCD_clk), + CLKDEV_CON_ID("pioB", &pioABCD_clk), + CLKDEV_CON_ID("pioC", &pioABCD_clk), + CLKDEV_CON_ID("pioD", &pioABCD_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +static void __init at91cap9_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); +} + +static struct clk_lookup console_clock_lookup; + +void __init at91cap9_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91cap9_gpio[] __initdata = { + { + .id = AT91CAP9_ID_PIOABCD, + .regbase = AT91CAP9_BASE_PIOA, + }, { + .id = AT91CAP9_ID_PIOABCD, + .regbase = AT91CAP9_BASE_PIOB, + }, { + .id = AT91CAP9_ID_PIOABCD, + .regbase = AT91CAP9_BASE_PIOC, + }, { + .id = AT91CAP9_ID_PIOABCD, + .regbase = AT91CAP9_BASE_PIOD, + } +}; + +static void at91cap9_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + +/* -------------------------------------------------------------------- + * AT91CAP9 processor initialization + * -------------------------------------------------------------------- */ + +static void __init at91cap9_map_io(void) +{ + at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); +} + +static void __init at91cap9_ioremap_registers(void) +{ + at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); + at91_ioremap_rstc(AT91CAP9_BASE_RSTC); + at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); + at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); +} + +static void __init at91cap9_initialize(void) +{ + arm_pm_idle = at91cap9_idle; + arm_pm_restart = at91sam9g45_restart; + at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); + + /* Register GPIO subsystem */ + at91_gpio_init(at91cap9_gpio, 4); + + /* Remember the silicon revision */ + if (cpu_is_at91cap9_revB()) + system_rev = 0xB; + else if (cpu_is_at91cap9_revC()) + system_rev = 0xC; +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A, B, C and D */ + 0, /* MP Block Peripheral 0 */ + 0, /* MP Block Peripheral 1 */ + 0, /* MP Block Peripheral 2 */ + 0, /* MP Block Peripheral 3 */ + 0, /* MP Block Peripheral 4 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 0, /* Multimedia Card Interface 0 */ + 0, /* Multimedia Card Interface 1 */ + 3, /* CAN */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 5, /* AC97 Controller */ + 0, /* Timer Counter 0, 1 and 2 */ + 0, /* Pulse Width Modulation Controller */ + 3, /* Ethernet */ + 0, /* Advanced Encryption Standard, Triple DES*/ + 0, /* Analog-to-Digital Converter */ + 0, /* Image Sensor Interface */ + 3, /* LCD Controller */ + 0, /* DMA Controller */ + 2, /* USB Device Port */ + 2, /* USB Host port */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +}; + +struct at91_init_soc __initdata at91cap9_soc = { + .map_io = at91cap9_map_io, + .default_irq_priority = at91cap9_default_irq_priority, + .ioremap_registers = at91cap9_ioremap_registers, + .register_clocks = at91cap9_register_clocks, + .init = at91cap9_initialize, +}; diff --git a/trunk/arch/arm/mach-at91/at91cap9_devices.c b/trunk/arch/arm/mach-at91/at91cap9_devices.c new file mode 100644 index 000000000000..d298fb7cb210 --- /dev/null +++ b/trunk/arch/arm/mach-at91/at91cap9_devices.c @@ -0,0 +1,1273 @@ +/* + * arch/arm/mach-at91/at91cap9_devices.c + * + * Copyright (C) 2007 Stelian Pop + * Copyright (C) 2007 Lead Tech Design + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include +#include +#include + +#include +#include +#include +#include + +#include