diff --git a/[refs] b/[refs]
index 55d8fd4be8b2..3f552b681df4 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0e6ce5f168e3b600b88d7e1a08c5b85cbceec6cb
+refs/heads/master: 0bf189abc52b89bfcfa9782543de7f5e90263fe5
diff --git a/trunk/Documentation/devicetree/bindings/mtd/orion-nand.txt b/trunk/Documentation/devicetree/bindings/mtd/orion-nand.txt
deleted file mode 100644
index b2356b7d2fa4..000000000000
--- a/trunk/Documentation/devicetree/bindings/mtd/orion-nand.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-NAND support for Marvell Orion SoC platforms
-
-Required properties:
-- compatible : "mrvl,orion-nand".
-- reg : Base physical address of the NAND and length of memory mapped
-	region
-
-Optional properties:
-- cle : Address line number connected to CLE. Default is 0
-- ale : Address line number connected to ALE. Default is 1
-- bank-width : Width in bytes of the device. Default is 1
-- chip-delay : Chip dependent delay for transferring data from array to read
-               registers in usecs
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-nand@f4000000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	cle = <0>;
-	ale = <1>;
-	bank-width = <1>;
-	chip-delay = <25>;
-	compatible = "mrvl,orion-nand";
-	reg = <0xf4000000 0x400>;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x200000>;
-	};
-
-	partition@300000 {
-		label = "dtb";
-		reg = <0x0300000 0x100000>;
-	};
-
-	partition@400000 {
-		label = "root";
-		reg = <0x0400000 0x7d00000>;
-	};
-};
diff --git a/trunk/arch/arm/boot/dts/kirkwood-dns320.dts b/trunk/arch/arm/boot/dts/kirkwood-dns320.dts
deleted file mode 100644
index dc09a735b04a..000000000000
--- a/trunk/arch/arm/boot/dts/kirkwood-dns320.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-/dts-v1/;
-
-/include/ "kirkwood.dtsi"
-
-/ {
-	model = "D-Link DNS-320 NAS (Rev A1)";
-	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <166666667>;
-			status = "okay";
-		};
-
-		serial@12100 {
-			clock-frequency = <166666667>;
-			status = "okay";
-		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
-	};
-};
diff --git a/trunk/arch/arm/boot/dts/kirkwood-dns325.dts b/trunk/arch/arm/boot/dts/kirkwood-dns325.dts
deleted file mode 100644
index c2a5562525d2..000000000000
--- a/trunk/arch/arm/boot/dts/kirkwood-dns325.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/dts-v1/;
-
-/include/ "kirkwood.dtsi"
-
-/ {
-	model = "D-Link DNS-325 NAS (Rev A1)";
-	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
-	};
-};
diff --git a/trunk/arch/arm/boot/dts/kirkwood-ib62x0.dts b/trunk/arch/arm/boot/dts/kirkwood-ib62x0.dts
deleted file mode 100644
index ada0f0c23085..000000000000
--- a/trunk/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/dts-v1/;
-
-/include/ "kirkwood.dtsi"
-
-/ {
-	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0",  "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x600000>;
-			};
-
-			partition@700000 {
-				label = "root";
-				reg = <0x0700000 0xf900000>;
-			};
-
-		};
-	};
-};
diff --git a/trunk/arch/arm/boot/dts/kirkwood-iconnect.dts b/trunk/arch/arm/boot/dts/kirkwood-iconnect.dts
deleted file mode 100644
index 1ba75d4adecc..000000000000
--- a/trunk/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/dts-v1/;
-
-/include/ "kirkwood.dtsi"
-
-/ {
-	model = "Iomega Iconnect";
-	compatible = "iom,iconnect-1.1", "iom,iconnect", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
-		linux,initrd-start = <0x4500040>;
-		linux,initrd-end   = <0x4800000>;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "ok";
-		};
-	};
-};
diff --git a/trunk/arch/arm/boot/dts/kirkwood.dtsi b/trunk/arch/arm/boot/dts/kirkwood.dtsi
index 926528b81baa..3474ef890945 100644
--- a/trunk/arch/arm/boot/dts/kirkwood.dtsi
+++ b/trunk/arch/arm/boot/dts/kirkwood.dtsi
@@ -5,7 +5,7 @@
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
+		ranges = <0 0xf1000000 0x1000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -32,18 +32,5 @@
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
 		};
-
-		nand@3000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "mrvl,orion-nand";
-			reg = <0x3000000 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			status = "disabled";
-		};
 	};
 };
diff --git a/trunk/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/trunk/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
deleted file mode 100644
index a7505a95a3b7..000000000000
--- a/trunk/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "armadillo 800 eva";
-	compatible = "renesas,armadillo800eva";
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-};
diff --git a/trunk/arch/arm/boot/dts/sh7372.dtsi b/trunk/arch/arm/boot/dts/sh7372.dtsi
deleted file mode 100644
index 677fc603f8b3..000000000000
--- a/trunk/arch/arm/boot/dts/sh7372.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Device Tree Source for the sh7372 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "renesas,sh7372";
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-};
diff --git a/trunk/arch/arm/boot/dts/sh73a0-kzm9g.dts b/trunk/arch/arm/boot/dts/sh73a0-kzm9g.dts
deleted file mode 100644
index bcb911951978..000000000000
--- a/trunk/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g", "renesas,sh73a0";
-
-	memory {
-		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
-	};
-};
diff --git a/trunk/arch/arm/configs/armadillo800eva_defconfig b/trunk/arch/arm/configs/armadillo800eva_defconfig
deleted file mode 100644
index ddc9fe6a78ac..000000000000
--- a/trunk/arch/arm/configs/armadillo800eva_defconfig
+++ /dev/null
@@ -1,142 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_MACH_ARMADILLO800EVA=y
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BPREDICT_DISABLE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-CONFIG_SH_ETH=y
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_XZ_DEC=y
diff --git a/trunk/arch/arm/configs/imx_v4_v5_defconfig b/trunk/arch/arm/configs/imx_v4_v5_defconfig
index 09a02963cf58..6b31cb60daab 100644
--- a/trunk/arch/arm/configs/imx_v4_v5_defconfig
+++ b/trunk/arch/arm/configs/imx_v4_v5_defconfig
@@ -92,7 +92,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-CONFIG_TOUCHSCREEN_MC13783=m
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
@@ -108,8 +107,7 @@ CONFIG_SPI_SPIDEV=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
-CONFIG_HWMON=m
-CONFIG_SENSORS_MC13783_ADC=m
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
diff --git a/trunk/arch/arm/configs/kzm9g_defconfig b/trunk/arch/arm/configs/kzm9g_defconfig
deleted file mode 100644
index e3ebc20ed0a7..000000000000
--- a/trunk/arch/arm/configs/kzm9g_defconfig
+++ /dev/null
@@ -1,139 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_KZM9G=y
-CONFIG_MEMORY_START=0x41000000
-CONFIG_MEMORY_SIZE=0x1f000000
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_SCHED_MC=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_SH_IRDA=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_PCF857X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_FB_SH_MOBILE_MERAM=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_ASYNC_TX_DMA=y
-CONFIG_STAGING=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRC16=y
diff --git a/trunk/arch/arm/configs/omap2plus_defconfig b/trunk/arch/arm/configs/omap2plus_defconfig
index 9854ff4279e0..d5f00d7eb075 100644
--- a/trunk/arch/arm/configs/omap2plus_defconfig
+++ b/trunk/arch/arm/configs/omap2plus_defconfig
@@ -98,7 +98,6 @@ CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_DEBUG=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC95XX=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
@@ -176,7 +175,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y
diff --git a/trunk/arch/arm/mach-exynos/Kconfig b/trunk/arch/arm/mach-exynos/Kconfig
index 2808e471cdcc..b8df521fb68e 100644
--- a/trunk/arch/arm/mach-exynos/Kconfig
+++ b/trunk/arch/arm/mach-exynos/Kconfig
@@ -200,7 +200,6 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS_DEV_DRM
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
 	select EXYNOS4_DEV_DMA
@@ -256,7 +255,6 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select EXYNOS4_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
@@ -293,7 +291,6 @@ config MACH_NURI
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
 	select EXYNOS4_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -328,7 +325,6 @@ config MACH_ORIGEN
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
-	select EXYNOS_DEV_DRM
 	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
@@ -349,11 +345,6 @@ config MACH_SMDK4212
 	select S3C_DEV_I2C7
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_MFC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
diff --git a/trunk/arch/arm/mach-exynos/mach-nuri.c b/trunk/arch/arm/mach-exynos/mach-nuri.c
index 0fcbb2e162e3..ed90aef404c3 100644
--- a/trunk/arch/arm/mach-exynos/mach-nuri.c
+++ b/trunk/arch/arm/mach-exynos/mach-nuri.c
@@ -25,7 +25,6 @@
 #include <linux/mmc/host.h>
 #include <linux/fb.h>
 #include <linux/pwm_backlight.h>
-#include <drm/exynos_drm.h>
 
 #include <video/platform_lcd.h>
 #include <media/m5mols.h>
@@ -214,29 +213,6 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel = {
-		.timing	= {
-			.xres		= 1024,
-			.yres		= 600,
-			.hsync_len	= 40,
-			.left_margin	= 79,
-			.right_margin	= 200,
-			.vsync_len	= 10,
-			.upper_margin	= 10,
-			.lower_margin	= 11,
-			.refresh	= 60,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 3,
-	.bpp		= 32,
-};
-
-#else
 /* Frame Buffer */
 static struct s3c_fb_pd_win nuri_fb_win0 = {
 	.win_mode = {
@@ -263,7 +239,6 @@ static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
-#endif
 
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
@@ -1327,9 +1302,6 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&cam_vdda_fixed_rdev,
 	&cam_8m_12v_fixed_rdev,
 	&exynos4_bus_devfreq,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 };
 
 static void __init nuri_map_io(void)
@@ -1362,12 +1334,7 @@ static void __init nuri_machine_init(void)
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 	s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
 
-#ifdef CONFIG_DRM_EXYNOS
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
 	s5p_fimd0_set_platdata(&nuri_fb_pdata);
-#endif
 
 	nuri_camera_init();
 
diff --git a/trunk/arch/arm/mach-exynos/mach-origen.c b/trunk/arch/arm/mach-exynos/mach-origen.c
index fe9627925846..878d4c99142d 100644
--- a/trunk/arch/arm/mach-exynos/mach-origen.c
+++ b/trunk/arch/arm/mach-exynos/mach-origen.c
@@ -45,7 +45,6 @@
 #include <mach/ohci.h>
 #include <mach/map.h>
 
-#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -584,27 +583,6 @@ static struct platform_device origen_lcd_hv070wsa = {
 	.dev.platform_data	= &origen_lcd_hv070wsa_data,
 };
 
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel	= {
-		.timing	= {
-			.left_margin	= 64,
-			.right_margin	= 16,
-			.upper_margin	= 64,
-			.lower_margin	= 16,
-			.hsync_len	= 48,
-			.vsync_len	= 3,
-			.xres		= 1024,
-			.yres		= 600,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-				VIDCON1_INV_VCLK,
-	.default_win	= 0,
-	.bpp		= 32,
-};
-#else
 static struct s3c_fb_pd_win origen_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 64,
@@ -618,8 +596,6 @@ static struct s3c_fb_pd_win origen_fb_win0 = {
 	},
 	.max_bpp		= 32,
 	.default_bpp		= 24,
-	.virtual_x		= 1024,
-	.virtual_y		= 2 * 600,
 };
 
 static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
@@ -629,10 +605,9 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
 				VIDCON1_INV_VCLK,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
-#endif
 
 /* Bluetooth rfkill gpio platform data */
-static struct rfkill_gpio_platform_data origen_bt_pdata = {
+struct rfkill_gpio_platform_data origen_bt_pdata = {
 	.reset_gpio	= EXYNOS4_GPX2(2),
 	.shutdown_gpio	= -1,
 	.type		= RFKILL_TYPE_BLUETOOTH,
@@ -669,9 +644,6 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
@@ -747,12 +719,7 @@ static void __init origen_machine_init(void)
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 
-#ifdef CONFIG_DRM_EXYNOS
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
 	s5p_fimd0_set_platdata(&origen_lcd_pdata);
-#endif
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
diff --git a/trunk/arch/arm/mach-exynos/mach-smdk4x12.c b/trunk/arch/arm/mach-exynos/mach-smdk4x12.c
index 7fca248efd32..d00e4f016a68 100644
--- a/trunk/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/trunk/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -31,7 +31,6 @@
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
-#include <plat/mfc.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
@@ -245,14 +244,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimc_md,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
 	&samsung_device_keypad,
 };
 
@@ -265,11 +256,6 @@ static void __init smdk4x12_map_io(void)
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
 
-static void __init smdk4x12_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
 static void __init smdk4x12_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -307,7 +293,6 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
-	.reserve	= &smdk4x12_reserve,
 MACHINE_END
 
 MACHINE_START(SMDK4412, "SMDK4412")
@@ -320,5 +305,4 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
-	.reserve	= &smdk4x12_reserve,
 MACHINE_END
diff --git a/trunk/arch/arm/mach-exynos/mach-smdkv310.c b/trunk/arch/arm/mach-exynos/mach-smdkv310.c
index afe7554d4ef5..83b91fa777c1 100644
--- a/trunk/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/trunk/arch/arm/mach-exynos/mach-smdkv310.c
@@ -44,7 +44,6 @@
 #include <mach/map.h>
 #include <mach/ohci.h>
 
-#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -161,26 +160,6 @@ static struct platform_device smdkv310_lcd_lte480wv = {
 	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
 };
 
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel	= {
-		.timing	= {
-			.left_margin	= 13,
-			.right_margin	= 8,
-			.upper_margin	= 7,
-			.lower_margin	= 5,
-			.hsync_len	= 3,
-			.vsync_len	= 1,
-			.xres		= 800,
-			.yres		= 480,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 0,
-	.bpp		= 32,
-};
-#else
 static struct s3c_fb_pd_win smdkv310_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 13,
@@ -202,7 +181,6 @@ static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
-#endif
 
 static struct resource smdkv310_smsc911x_resources[] = {
 	[0] = {
@@ -295,9 +273,6 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_fimc_md,
 	&s5p_device_g2d,
 	&s5p_device_jpeg,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&exynos4_device_ohci,
@@ -389,12 +364,7 @@ static void __init smdkv310_machine_init(void)
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
-#ifdef CONFIG_DRM_EXYNOS
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
-#endif
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
diff --git a/trunk/arch/arm/mach-exynos/mach-universal_c210.c b/trunk/arch/arm/mach-exynos/mach-universal_c210.c
index 08e5a8e45bdb..a34036eb8ba2 100644
--- a/trunk/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/trunk/arch/arm/mach-exynos/mach-universal_c210.c
@@ -23,7 +23,6 @@
 #include <linux/i2c-gpio.h>
 #include <linux/i2c/mcs.h>
 #include <linux/i2c/atmel_mxt_ts.h>
-#include <drm/exynos_drm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -814,29 +813,6 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel = {
-		.timing	= {
-			.left_margin	= 16,
-			.right_margin	= 16,
-			.upper_margin	= 2,
-			.lower_margin	= 28,
-			.hsync_len	= 2,
-			.vsync_len	= 1,
-			.xres		= 480,
-			.yres		= 800,
-			.refresh	= 55,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
-			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 3,
-	.bpp		= 32,
-};
-#else
 /* Frame Buffer */
 static struct s3c_fb_pd_win universal_fb_win0 = {
 	.win_mode = {
@@ -864,7 +840,6 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
 			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
-#endif
 
 static struct regulator_consumer_supply cam_vt_dio_supply =
 	REGULATOR_SUPPLY("vdd_core", "0-003c");
@@ -1074,9 +1049,6 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s5p_device_onenand,
 	&s5p_device_fimd0,
 	&s5p_device_jpeg,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
@@ -1124,12 +1096,7 @@ static void __init universal_machine_init(void)
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
-#ifdef CONFIG_DRM_EXYNOS
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
 	s5p_fimd0_set_platdata(&universal_lcd_pdata);
-#endif
 
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
diff --git a/trunk/arch/arm/mach-imx/Kconfig b/trunk/arch/arm/mach-imx/Kconfig
index 18399d10d170..7561eca131b0 100644
--- a/trunk/arch/arm/mach-imx/Kconfig
+++ b/trunk/arch/arm/mach-imx/Kconfig
@@ -163,7 +163,6 @@ config MACH_EUKREA_CPUIMX25SD
 	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -182,7 +181,6 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -608,7 +606,6 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -685,13 +682,42 @@ config MACH_MX51_3DS
 	  Include support for MX51PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -707,7 +733,6 @@ choice
 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 	prompt "Eukrea MBIMXSD development board"
 	bool
-	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select LEDS_GPIO_REGISTER
 	help
diff --git a/trunk/arch/arm/mach-imx/Makefile b/trunk/arch/arm/mach-imx/Makefile
index 4937c070a57e..ab939c5046c3 100644
--- a/trunk/arch/arm/mach-imx/Makefile
+++ b/trunk/arch/arm/mach-imx/Makefile
@@ -83,8 +83,10 @@ obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
 obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
 obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
 obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
 obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
 obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
 obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
new file mode 100644
index 000000000000..a6a3ab8f1b1c
--- /dev/null
+++ b/trunk/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
@@ -0,0 +1,206 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/leds.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/mach/arch.h>
+
+#include "devices-imx51.h"
+
+#define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
+#define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
+#define MBIMX51_LED1		IMX_GPIO_NR(3, 6)
+#define MBIMX51_LED2		IMX_GPIO_NR(3, 7)
+#define MBIMX51_LED3		IMX_GPIO_NR(3, 8)
+
+static const struct gpio_led mbimx51_leds[] __initconst = {
+	{
+		.name			= "led0",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED0,
+	},
+	{
+		.name			= "led1",
+		.default_trigger	= "nand-disk",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED1,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED2,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "default-on",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED3,
+	},
+};
+
+static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
+	.leds		= mbimx51_leds,
+	.num_leds	= ARRAY_SIZE(mbimx51_leds),
+};
+
+static iomux_v3_cfg_t mbimx51_pads[] = {
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+
+	/* TSC2007 IRQ */
+	MX51_PAD_NANDF_D10__GPIO3_30,
+
+	/* LEDS */
+	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+	MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
+	MX51_PAD_DISPB2_SER_RS__GPIO3_8,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+
+	/* SD 1 */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* SD 2 */
+	MX51_PAD_SD2_CMD__SD2_CMD,
+	MX51_PAD_SD2_CLK__SD2_CLK,
+	MX51_PAD_SD2_DATA0__SD2_DATA0,
+	MX51_PAD_SD2_DATA1__SD2_DATA1,
+	MX51_PAD_SD2_DATA2__SD2_DATA2,
+	MX51_PAD_SD2_DATA3__SD2_DATA3,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mbimx51_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_UP),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_RIGHT),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+};
+
+static const struct matrix_keymap_data mbimx51_map_data __initconst = {
+	.keymap		= mbimx51_keymap,
+	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
+};
+
+static int tsc2007_get_pendown_state(void)
+{
+	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
+}
+
+struct tsc2007_platform_data tsc2007_data = {
+	.model = 2007,
+	.x_plate_ohms = 180,
+	.get_pendown_state = tsc2007_get_pendown_state,
+};
+
+static struct i2c_board_info mbimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tsc2007", 0x49),
+		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
+		.platform_data = &tsc2007_data,
+	}, {
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+/*
+ * baseboard initialization.
+ */
+void __init eukrea_mbimx51_baseboard_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
+					ARRAY_SIZE(mbimx51_pads));
+
+	imx51_add_imx_uart(1, NULL);
+	imx51_add_imx_uart(2, &uart_pdata);
+
+	gpio_request(MBIMX51_LED0, "LED0");
+	gpio_direction_output(MBIMX51_LED0, 1);
+	gpio_free(MBIMX51_LED0);
+	gpio_request(MBIMX51_LED1, "LED1");
+	gpio_direction_output(MBIMX51_LED1, 1);
+	gpio_free(MBIMX51_LED1);
+	gpio_request(MBIMX51_LED2, "LED2");
+	gpio_direction_output(MBIMX51_LED2, 1);
+	gpio_free(MBIMX51_LED2);
+	gpio_request(MBIMX51_LED3, "LED3");
+	gpio_direction_output(MBIMX51_LED3, 1);
+	gpio_free(MBIMX51_LED3);
+
+	gpio_led_register_device(-1, &mbimx51_leds_info);
+
+	imx51_add_imx_keypad(&mbimx51_map_data);
+
+	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
+	gpio_direction_input(MBIMX51_TSC2007_GPIO);
+	irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
+					IRQF_TRIGGER_FALLING);
+	i2c_register_board_info(1, mbimx51_i2c_devices,
+				ARRAY_SIZE(mbimx51_i2c_devices));
+
+	imx51_add_sdhci_esdhc_imx(0, NULL);
+	imx51_add_sdhci_esdhc_imx(1, NULL);
+}
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
similarity index 51%
rename from trunk/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
rename to trunk/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
index 96a24b73dc23..aaa592fdb9ce 100644
--- a/trunk/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
+++ b/trunk/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
@@ -28,8 +28,6 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
-#include <video/platform_lcd.h>
-#include <linux/backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -42,7 +40,7 @@
 
 #include "devices-imx51.h"
 
-static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LED */
 	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
@@ -68,64 +66,12 @@ static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
 	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-	/* SSI */
-	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
-	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
-	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
-	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
-	/* LCD Backlight */
-	MX51_PAD_DI1_D1_CS__GPIO3_4,
-	/* LCD RST */
-	MX51_PAD_CSI1_D9__GPIO3_13,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
-#define GPIO_LCDRST	IMX_GPIO_NR(3, 13)
-#define GPIO_LCDBL	IMX_GPIO_NR(3, 4)
 
-static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDRST, 1);
-	else
-		gpio_direction_output(GPIO_LCDRST, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd51_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd51_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd51_lcd_power_data,
-};
-
-static void eukrea_mbimxsd51_bl_set_intensity(int intensity)
-{
-	if (intensity)
-		gpio_direction_output(GPIO_LCDBL, 1);
-	else
-		gpio_direction_output(GPIO_LCDBL, 0);
-}
-
-static struct generic_bl_info eukrea_mbimxsd51_bl_info = {
-	.name			= "eukrea_mbimxsd51-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= eukrea_mbimxsd51_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimxsd51_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data	= &eukrea_mbimxsd51_bl_info,
-	},
-};
-
-static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
 	{
 		.name			= "led1",
 		.default_trigger	= "heartbeat",
@@ -135,12 +81,12 @@ static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
 };
 
 static const struct gpio_led_platform_data
-		eukrea_mbimxsd51_led_info __initconst = {
-	.leds		= eukrea_mbimxsd51_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd51_leds),
+		eukrea_mbimxsd_led_info __initconst = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
 };
 
-static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	{
 		.gpio		= GPIO_SWITCH1,
 		.code		= BTN_0,
@@ -151,39 +97,21 @@ static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
 };
 
 static const struct gpio_keys_platform_data
-		eukrea_mbimxsd51_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd51_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons),
+		eukrea_mbimxsd_button_data __initconst = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = {
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),
 	},
 };
 
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static int screen_type;
-
-static int __init eukrea_mbimxsd51_screen_type(char *options)
-{
-	if (!strcmp(options, "dvi"))
-		screen_type = 1;
-	else if (!strcmp(options, "tft"))
-		screen_type = 0;
-
-	return 0;
-}
-__setup("screen_type=", eukrea_mbimxsd51_screen_type);
-
 /*
  * system init for baseboard usage. Will be called by cpuimx51sd init.
  *
@@ -192,8 +120,8 @@ __setup("screen_type=", eukrea_mbimxsd51_screen_type);
  */
 void __init eukrea_mbimxsd51_baseboard_init(void)
 {
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads,
-			ARRAY_SIZE(eukrea_mbimxsd51_pads)))
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
 		printk(KERN_ERR "error setting mbimxsd pads !\n");
 
 	imx51_add_imx_uart(1, NULL);
@@ -201,8 +129,6 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 
 	imx51_add_sdhci_esdhc_imx(0, NULL);
 
-	imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata);
-
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
 	gpio_free(GPIO_LED1);
@@ -211,21 +137,9 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 	gpio_direction_input(GPIO_SWITCH1);
 	gpio_free(GPIO_SWITCH1);
 
-	gpio_request(GPIO_LCDRST, "LCDRST");
-	gpio_direction_output(GPIO_LCDRST, 0);
-	gpio_request(GPIO_LCDBL, "LCDBL");
-	gpio_direction_output(GPIO_LCDBL, 0);
-	if (!screen_type) {
-		platform_device_register(&eukrea_mbimxsd51_bl_dev);
-		platform_device_register(&eukrea_mbimxsd51_lcd_powerdev);
-	} else {
-		gpio_free(GPIO_LCDRST);
-		gpio_free(GPIO_LCDBL);
-	}
-
-	i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices));
-
-	gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index dfd2da87c2df..2cf603e11c4f 100644
--- a/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -23,7 +23,6 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/spi/spi.h>
 #include <video/platform_lcd.h>
 
 #include <mach/hardware.h>
@@ -88,22 +87,12 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* CAN */
 	MX25_PAD_GPIO_D__CAN2_RX,
 	MX25_PAD_GPIO_C__CAN2_TX,
-	/* SPI1 */
-	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
-	MX25_PAD_CSPI1_MISO__CSPI1_MISO,
-	MX25_PAD_CSPI1_SS0__GPIO_1_16,
-	MX25_PAD_CSPI1_SS1__GPIO_1_17,
-	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	MX25_PAD_CSPI1_RDY__GPIO_2_22,
 };
 
-#define GPIO_LED1		IMX_GPIO_NR(3, 19)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 18)
-#define GPIO_SD1CD		IMX_GPIO_NR(2, 20)
-#define GPIO_LCDPWR		IMX_GPIO_NR(1, 26)
-#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 16)
-#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 17)
-#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(2, 22)
+#define GPIO_LED1	83
+#define GPIO_SWITCH1	82
+#define GPIO_SD1CD	52
+#define GPIO_LCDPWR	26
 
 static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
 	{
@@ -239,30 +228,6 @@ static struct esdhc_platform_data sd1_pdata = {
 	.wp_type = ESDHC_WP_NONE,
 };
 
-static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.mode = SPI_MODE_0,
-	},
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
-
-static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
-	.chipselect     = eukrea_mbimxsd25_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
-};
-
 /*
  * system init for baseboard usage. Will be called by cpuimx25 init.
  *
@@ -292,17 +257,11 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 
 	gpio_request(GPIO_LCDPWR, "LCDPWR");
 	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_SWITCH1);
 
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
-	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
-	gpio_direction_input(GPIO_SPI1_IRQ);
-	gpio_free(GPIO_SPI1_IRQ);
-	imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
-	spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
-		ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
-
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 557f6c486053..fd8bf8a425a7 100644
--- a/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -27,7 +27,6 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/spi/spi.h>
 #include <video/platform_lcd.h>
 #include <linux/i2c.h>
 
@@ -159,22 +158,12 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 	/* SD1 CD */
 	MX35_PAD_LD18__GPIO3_24,
-	/* SPI */
-	MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
-	MX35_PAD_CSPI1_MISO__CSPI1_MISO,
-	MX35_PAD_CSPI1_SS0__GPIO1_18,
-	MX35_PAD_CSPI1_SS1__GPIO1_19,
-	MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
 #define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
-#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 18)
-#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 19)
-#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(3, 5)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -250,30 +239,6 @@ static struct esdhc_platform_data sd1_pdata = {
 	.wp_type = ESDHC_WP_NONE,
 };
 
-static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.mode = SPI_MODE_0,
-	},
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
-
-static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
-	.chipselect     = eukrea_mbimxsd35_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
-};
-
 /*
  * system init for baseboard usage. Will be called by cpuimx35 init.
  *
@@ -309,13 +274,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
-	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
-	gpio_direction_input(GPIO_SPI1_IRQ);
-	gpio_free(GPIO_SPI1_IRQ);
-	imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
-	spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
-		ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
-
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
diff --git a/trunk/arch/arm/mach-imx/mach-cpuimx51.c b/trunk/arch/arm/mach-imx/mach-cpuimx51.c
new file mode 100644
index 000000000000..944025da8333
--- /dev/null
+++ b/trunk/arch/arm/mach-imx/mach-cpuimx51.c
@@ -0,0 +1,301 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+
+#define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
+#define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
+#define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
+#define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
+#define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
+#define CPUIMX51_QUART_XTAL	14745600
+#define CPUIMX51_QUART_REGSHIFT	17
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET		0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ		0x02
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&serial_device,
+};
+
+static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* I2C2 */
+	MX51_PAD_GPIO1_2__I2C2_SCL,
+	MX51_PAD_GPIO1_3__I2C2_SDA,
+	MX51_PAD_NANDF_D10__GPIO3_30,
+
+	/* QUART IRQ */
+	MX51_PAD_NANDF_D15__GPIO3_25,
+	MX51_PAD_NANDF_D14__GPIO3_26,
+	MX51_PAD_NANDF_D13__GPIO3_27,
+	MX51_PAD_NANDF_D12__GPIO3_28,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+	MX51_PAD_USBH1_STP__USBH1_STP,
+};
+
+static const struct mxc_nand_platform_data
+		eukrea_cpuimx51_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const
+struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
+}
+
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+};
+
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init eukrea_cpuimx51_init(void)
+{
+	imx51_soc_init();
+
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
+					ARRAY_SIZE(eukrea_cpuimx51_pads));
+
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
+
+	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
+	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
+	gpio_free(CPUIMX51_QUARTA_GPIO);
+	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
+	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
+	gpio_free(CPUIMX51_QUARTB_GPIO);
+	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
+	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
+	gpio_free(CPUIMX51_QUARTC_GPIO);
+	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
+	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
+	gpio_free(CPUIMX51_QUARTD_GPIO);
+
+	imx51_add_fec(NULL);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
+	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
+
+	if (otg_mode_host)
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
+	}
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
+	eukrea_mbimx51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= eukrea_cpuimx51_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
+	/* Maintainer: Eric Bénard <eric@eukrea.com> */
+	.atag_offset = 0x100,
+	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
+	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
+	.timer = &mxc_timer,
+	.init_machine = eukrea_cpuimx51_init,
+	.restart	= mxc_restart,
+MACHINE_END
diff --git a/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c b/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c
index ce341a6874fc..9fbe923c8b08 100644
--- a/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -41,13 +41,11 @@
 
 #define USBH1_RST		IMX_GPIO_NR(2, 28)
 #define ETH_RST			IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO_REV2	IMX_GPIO_NR(3, 12)
-#define TSC2007_IRQGPIO_REV3	IMX_GPIO_NR(4, 0)
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 12)
 #define CAN_IRQGPIO		IMX_GPIO_NR(1, 1)
 #define CAN_RST			IMX_GPIO_NR(4, 15)
 #define CAN_NCS			IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF_REV2		IMX_GPIO_NR(1, 4)
-#define CAN_RXOBF_REV3		IMX_GPIO_NR(3, 12)
+#define CAN_RXOBF		IMX_GPIO_NR(1, 4)
 #define CAN_RX1BF		IMX_GPIO_NR(1, 6)
 #define CAN_TXORTS		IMX_GPIO_NR(1, 7)
 #define CAN_TX1RTS		IMX_GPIO_NR(1, 8)
@@ -92,10 +90,6 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	MX51_PAD_I2C1_CLK__GPIO4_16,
 	MX51_PAD_I2C1_DAT__GPIO4_17,
 
-	/* I2C1 */
-	MX51_PAD_SD2_CMD__I2C1_SCL,
-	MX51_PAD_SD2_CLK__I2C1_SDA,
-
 	/* CAN */
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
@@ -114,27 +108,15 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-	NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int tsc2007_get_pendown_state(void)
-{
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0)
-		return !gpio_get_value(TSC2007_IRQGPIO_REV2);
-	else
-		return !gpio_get_value(TSC2007_IRQGPIO_REV3);
-}
-
 static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
-	.get_pendown_state	= tsc2007_get_pendown_state,
 };
 
 static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
@@ -144,6 +126,7 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x49),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -272,14 +255,10 @@ static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
 	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
 };
 
-static struct platform_device *rev2_platform_devices[] __initdata = {
+static struct platform_device *platform_devices[] __initdata = {
 	&hsi2c_gpio_device,
 };
 
-static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
 static void __init eukrea_cpuimx51sd_init(void)
 {
 	imx51_soc_init();
@@ -293,7 +272,6 @@ static void __init eukrea_cpuimx51sd_init(void)
 
 	imx51_add_imx_uart(0, &uart_pdata);
 	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
-	imx51_add_imx2_wdt(0, NULL);
 
 	gpio_request(ETH_RST, "eth_rst");
 	gpio_set_value(ETH_RST, 1);
@@ -313,25 +291,13 @@ static void __init eukrea_cpuimx51sd_init(void)
 	spi_register_board_info(cpuimx51sd_spi_device,
 				ARRAY_SIZE(cpuimx51sd_spi_device));
 
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0) {
-		eukrea_cpuimx51sd_i2c_devices[1].irq =
-			gpio_to_irq(TSC2007_IRQGPIO_REV2),
-		platform_add_devices(rev2_platform_devices,
-			ARRAY_SIZE(rev2_platform_devices));
-		gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq");
-		gpio_direction_input(TSC2007_IRQGPIO_REV2);
-		gpio_free(TSC2007_IRQGPIO_REV2);
-	} else {
-		eukrea_cpuimx51sd_i2c_devices[1].irq =
-			gpio_to_irq(TSC2007_IRQGPIO_REV3),
-		imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data);
-		gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq");
-		gpio_direction_input(TSC2007_IRQGPIO_REV3);
-		gpio_free(TSC2007_IRQGPIO_REV3);
-	}
+	gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
+	gpio_direction_input(TSC2007_IRQGPIO);
+	gpio_free(TSC2007_IRQGPIO);
 
 	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
 			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	if (otg_mode_host)
 		imx51_add_mxc_ehci_otg(&dr_utmi_config);
diff --git a/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index d1e04e676e33..76a97a598b9e 100644
--- a/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -106,7 +106,6 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_UTMI,
-	.workaround     = FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
 static int otg_mode_host;
@@ -136,7 +135,6 @@ static void __init eukrea_cpuimx25_init(void)
 	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
 	imx25_add_imxdi_rtc(NULL);
 	imx25_add_fec(&mx25_fec_pdata);
-	imx25_add_imx2_wdt(NULL);
 
 	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
diff --git a/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 748ba2e311b5..f7b074f496f0 100644
--- a/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,7 +38,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/system.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 
@@ -49,14 +48,6 @@
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)
 
-#define MOTHERBOARD_BIT2	(GPIO_PORTD + 31)
-#define MOTHERBOARD_BIT1	(GPIO_PORTD + 30)
-#define MOTHERBOARD_BIT0	(GPIO_PORTD + 29)
-
-#define EXPBOARD_BIT2		(GPIO_PORTD + 25)
-#define EXPBOARD_BIT1		(GPIO_PORTD + 27)
-#define EXPBOARD_BIT0		(GPIO_PORTD + 28)
-
 static const int visstrim_m10_pins[] __initconst = {
 	/* UART1 (console) */
 	PE12_PF_UART1_TXD,
@@ -128,23 +119,6 @@ static const int visstrim_m10_pins[] __initconst = {
 	PB19_PF_CSI_D7,
 	PB20_PF_CSI_VSYNC,
 	PB21_PF_CSI_HSYNC,
-	/* mother board version */
-	MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
-	MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
-	MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
-	/* expansion board version */
-	EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
-	EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
-	EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
-};
-
-static struct gpio visstrim_m10_version_gpios[] = {
-	{ EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
-	{ EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
-	{ EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
-	{ MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
-	{ MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
-	{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
 };
 
 /* Camera */
@@ -395,40 +369,11 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
 	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
 };
 
-static void __init visstrim_m10_revision(void)
-{
-	int exp_version = 0;
-	int mo_version = 0;
-	int ret;
-
-	ret = gpio_request_array(visstrim_m10_version_gpios,
-				 ARRAY_SIZE(visstrim_m10_version_gpios));
-	if (ret) {
-		pr_err("Failed to request version gpios");
-		return;
-	}
-
-	/* Get expansion board version (negative logic) */
-	exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
-	exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
-	exp_version |= !gpio_get_value(EXPBOARD_BIT0);
-
-	/* Get mother board version (negative logic) */
-	mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
-	mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
-	mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
-
-	system_rev = 0x27000;
-	system_rev |= (mo_version << 4);
-	system_rev |= exp_version;
-}
-
 static void __init visstrim_m10_board_init(void)
 {
 	int ret;
 
 	imx27_soc_init();
-	visstrim_m10_revision();
 
 	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
 			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
diff --git a/trunk/arch/arm/mach-imx/mach-mx35_3ds.c b/trunk/arch/arm/mach-imx/mach-mx35_3ds.c
index e99b016bbbb6..6ae51c6b95b7 100644
--- a/trunk/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/trunk/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -34,8 +34,6 @@
 #include <linux/usb/otg.h>
 
 #include <linux/mtd/physmap.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -255,8 +253,6 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
 	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
 	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
 	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
-	/*PMIC IRQ*/
-	MX35_PAD_GPIO2_0__GPIO2_0,
 };
 
 /*
@@ -321,193 +317,6 @@ static struct platform_device mx35_3ds_ov2640 = {
 	},
 };
 
-static struct regulator_consumer_supply sw1_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_consumer_supply vcam_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-};
-
-static struct regulator_consumer_supply vaudio_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data sw1_init = {
-	.constraints = {
-		.name = "SW1",
-		.min_uV = 600000,
-		.max_uV = 1375000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.valid_modes_mask = 0,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
-	.consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
-	.constraints = {
-		.name = "SW2",
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw3_init = {
-	.constraints = {
-		.name = "SW3",
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw4_init = {
-	.constraints = {
-		.name = "SW4",
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data viohi_init = {
-	.constraints = {
-		.name = "VIOHI",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb_init = {
-	.constraints = {
-		.name = "VUSB",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vdig_init = {
-	.constraints = {
-		.name = "VDIG",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vpll_init = {
-	.constraints = {
-		.name = "VPLL",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb2_init = {
-	.constraints = {
-		.name = "VUSB2",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vvideo_init = {
-	.constraints = {
-		.name = "VVIDEO",
-		.boot_on = 1
-	}
-};
-
-static struct regulator_init_data vaudio_init = {
-	.constraints = {
-		.name = "VAUDIO",
-		.min_uV = 2300000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
-	.consumer_supplies = vaudio_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
-	.constraints = {
-		.name = "VCAM",
-		.min_uV = 2500000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					REGULATOR_CHANGE_MODE,
-		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
-		.boot_on = 1
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
-	.consumer_supplies = vcam_consumers,
-};
-
-static struct regulator_init_data vgen1_init = {
-	.constraints = {
-		.name = "VGEN1",
-	}
-};
-
-static struct regulator_init_data vgen2_init = {
-	.constraints = {
-		.name = "VGEN2",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen3_init = {
-	.constraints = {
-		.name = "VGEN3",
-	}
-};
-
-static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
-	{ .id = MC13892_SW1, .init_data = &sw1_init },
-	{ .id = MC13892_SW2, .init_data = &sw2_init },
-	{ .id = MC13892_SW3, .init_data = &sw3_init },
-	{ .id = MC13892_SW4, .init_data = &sw4_init },
-	{ .id = MC13892_VIOHI, .init_data = &viohi_init },
-	{ .id = MC13892_VPLL, .init_data = &vpll_init },
-	{ .id = MC13892_VDIG, .init_data = &vdig_init },
-	{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
-	{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
-	{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
-	{ .id = MC13892_VCAM, .init_data = &vcam_init },
-	{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
-	{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
-	{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
-	{ .id = MC13892_VUSB, .init_data = &vusb_init },
-};
-
-static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
-	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
-	.regulators = {
-		.num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
-		.regulators = mx35_3ds_regulators,
-	},
-};
-
-#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
-
-static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
-
-	I2C_BOARD_INFO("mc13892", 0x08),
-	.platform_data = &mx35_3ds_mc13892_data,
-	.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
-};
-
-static void __init imx35_3ds_init_mc13892(void)
-{
-	int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
-
-	if (ret) {
-		pr_err("failed to get pmic irq: %d\n", ret);
-		return;
-	}
-
-	i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
-}
-
 static int mx35_3ds_otg_init(struct platform_device *pdev)
 {
 	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
@@ -603,8 +412,6 @@ static void __init mx35_3ds_init(void)
 	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
 	platform_device_register(&mx35_3ds_lcd);
-
-	imx35_3ds_init_mc13892();
 }
 
 static void __init mx35pdk_timer_init(void)
diff --git a/trunk/arch/arm/mach-kirkwood/Kconfig b/trunk/arch/arm/mach-kirkwood/Kconfig
index 199764fe0fb0..90ceab761929 100644
--- a/trunk/arch/arm/mach-kirkwood/Kconfig
+++ b/trunk/arch/arm/mach-kirkwood/Kconfig
@@ -58,28 +58,6 @@ config MACH_DREAMPLUG_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DreamPlug (Flattened Device Tree).
 
-config MACH_ICONNECT_DT
-	bool "Iomega Iconnect (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here to enable Iomega Iconnect support.
-
-config MACH_DLINK_KIRKWOOD_DT
-	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
-	  using Flattened Device Tree.
-
-config MACH_IB62X0_DT
-	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
-	  Flattened Device Tree.
-
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
diff --git a/trunk/arch/arm/mach-kirkwood/Makefile b/trunk/arch/arm/mach-kirkwood/Makefile
index d2b05907b10e..e299a9576bf0 100644
--- a/trunk/arch/arm/mach-kirkwood/Makefile
+++ b/trunk/arch/arm/mach-kirkwood/Makefile
@@ -22,6 +22,3 @@ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
-obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
-obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
-obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
diff --git a/trunk/arch/arm/mach-kirkwood/Makefile.boot b/trunk/arch/arm/mach-kirkwood/Makefile.boot
index 02edbdf5b065..16f938522304 100644
--- a/trunk/arch/arm/mach-kirkwood/Makefile.boot
+++ b/trunk/arch/arm/mach-kirkwood/Makefile.boot
@@ -3,7 +3,3 @@ params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
 
 dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
diff --git a/trunk/arch/arm/mach-kirkwood/board-dnskw.c b/trunk/arch/arm/mach-kirkwood/board-dnskw.c
deleted file mode 100644
index 58c2d68f9443..000000000000
--- a/trunk/arch/arm/mach-kirkwood/board-dnskw.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
- *
- * arch/arm/mach-kirkwood/board-dnskw.c
- *
- * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio-fan.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data dnskw_sata_data = {
-	.n_ports	= 2,
-};
-
-static unsigned int dnskw_mpp_config[] __initdata = {
-	MPP13_UART1_TXD,	/* Custom ... */
-	MPP14_UART1_RXD,	/* ... Controller (DNS-320 only) */
-	MPP20_SATA1_ACTn,	/* LED: White Right HDD */
-	MPP21_SATA0_ACTn,	/* LED: White Left HDD */
-	MPP24_GPIO,
-	MPP25_GPIO,
-	MPP26_GPIO,	/* LED: Power */
-	MPP27_GPIO,	/* LED: Red Right HDD */
-	MPP28_GPIO,	/* LED: Red Left HDD */
-	MPP29_GPIO,	/* LED: Red USB (DNS-325 only) */
-	MPP30_GPIO,
-	MPP31_GPIO,
-	MPP32_GPIO,
-	MPP33_GPO,
-	MPP34_GPIO,	/* Button: Front power */
-	MPP35_GPIO,	/* LED: Red USB (DNS-320 only) */
-	MPP36_GPIO,	/* Power: Turn off board */
-	MPP37_GPIO,	/* Power: Turn back on after power failure */
-	MPP38_GPIO,
-	MPP39_GPIO,	/* Power: SATA0 */
-	MPP40_GPIO,	/* Power: SATA1 */
-	MPP41_GPIO,	/* SATA0 present */
-	MPP42_GPIO,	/* SATA1 present */
-	MPP43_GPIO,	/* LED: White USB */
-	MPP44_GPIO,	/* Fan: Tachometer Pin */
-	MPP45_GPIO,	/* Fan: high speed */
-	MPP46_GPIO,	/* Fan: low speed */
-	MPP47_GPIO,	/* Button: Back unmount */
-	MPP48_GPIO,	/* Button: Back reset */
-	MPP49_GPIO,	/* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
-	0
-};
-
-static struct gpio_led dns325_led_pins[] = {
-	{
-		.name	= "dns325:white:power",
-		.gpio	= 26,
-		.active_low = 1,
-		.default_trigger = "default-on",
-	},
-	{
-		.name	= "dns325:white:usb",
-		.gpio	= 43,
-		.active_low = 1,
-	},
-	{
-		.name	= "dns325:red:l_hdd",
-		.gpio	= 28,
-		.active_low = 1,
-	},
-	{
-		.name	= "dns325:red:r_hdd",
-		.gpio	= 27,
-		.active_low = 1,
-	},
-	{
-		.name	= "dns325:red:usb",
-		.gpio	= 29,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data dns325_led_data = {
-	.num_leds	= ARRAY_SIZE(dns325_led_pins),
-	.leds		= dns325_led_pins,
-};
-
-static struct platform_device dns325_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &dns325_led_data,
-	},
-};
-
-static struct gpio_led dns320_led_pins[] = {
-	{
-		.name	= "dns320:blue:power",
-		.gpio	= 26,
-		.active_low = 1,
-		.default_trigger = "default-on",
-	},
-	{
-		.name	= "dns320:blue:usb",
-		.gpio	= 43,
-		.active_low = 1,
-	},
-	{
-		.name	= "dns320:orange:l_hdd",
-		.gpio	= 28,
-		.active_low = 1,
-	},
-	{
-		.name	= "dns320:orange:r_hdd",
-		.gpio	= 27,
-		.active_low = 1,
-	},
-	{
-		.name	= "dns320:orange:usb",
-		.gpio	= 35,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data dns320_led_data = {
-	.num_leds	= ARRAY_SIZE(dns320_led_pins),
-	.leds		= dns320_led_pins,
-};
-
-static struct platform_device dns320_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &dns320_led_data,
-	},
-};
-
-static struct i2c_board_info dns325_i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("lm75", 0x48),
-	},
-	/* Something at 0x0c also */
-};
-
-static struct gpio_keys_button dnskw_button_pins[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= 34,
-		.desc		= "Power button",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_EJECTCD,
-		.gpio		= 47,
-		.desc		= "USB unmount button",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 48,
-		.desc		= "Reset button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data dnskw_button_data = {
-	.buttons	= dnskw_button_pins,
-	.nbuttons	= ARRAY_SIZE(dnskw_button_pins),
-};
-
-static struct platform_device dnskw_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &dnskw_button_data,
-	}
-};
-
-/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-static struct gpio_fan_speed dnskw_fan_speed[] = {
-	{    0,  0 },
-	{ 3000,	 1 },
-	{ 6000,	 2 },
-};
-static unsigned dnskw_fan_pins[] = {46, 45};
-
-static struct gpio_fan_platform_data dnskw_fan_data = {
-	.num_ctrl	= ARRAY_SIZE(dnskw_fan_pins),
-	.ctrl		= dnskw_fan_pins,
-	.num_speed	= ARRAY_SIZE(dnskw_fan_speed),
-	.speed		= dnskw_fan_speed,
-};
-
-static struct platform_device dnskw_fan_device = {
-	.name	= "gpio-fan",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dnskw_fan_data,
-	},
-};
-
-static void dnskw_power_off(void)
-{
-	gpio_set_value(36, 1);
-}
-
-/* Register any GPIO for output and set the value */
-static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
-{
-	if (gpio_request(gpio, name) == 0 &&
-	    gpio_direction_output(gpio, 0) == 0) {
-		gpio_set_value(gpio, def);
-		if (gpio_export(gpio, 0) != 0)
-			pr_err("dnskw: Failed to export GPIO %s\n", name);
-	} else
-		pr_err("dnskw: Failed to register %s\n", name);
-}
-
-void __init dnskw_init(void)
-{
-	kirkwood_mpp_conf(dnskw_mpp_config);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&dnskw_ge00_data);
-	kirkwood_sata_init(&dnskw_sata_data);
-	kirkwood_i2c_init();
-
-	platform_device_register(&dnskw_button_device);
-	platform_device_register(&dnskw_fan_device);
-
-	if (of_machine_is_compatible("dlink,dns-325")) {
-		i2c_register_board_info(0, dns325_i2c_board_info,
-					ARRAY_SIZE(dns325_i2c_board_info));
-		platform_device_register(&dns325_led_device);
-
-	} else if (of_machine_is_compatible("dlink,dns-320"))
-		platform_device_register(&dns320_led_device);
-
-	/* Register power-off GPIO. */
-	if (gpio_request(36, "dnskw:power:off") == 0
-	    && gpio_direction_output(36, 0) == 0)
-		pm_power_off = dnskw_power_off;
-	else
-		pr_err("dnskw: failed to configure power-off GPIO\n");
-
-	/* Ensure power is supplied to both HDDs */
-	dnskw_gpio_register(39, "dnskw:power:sata0", 1);
-	dnskw_gpio_register(40, "dnskw:power:sata1", 1);
-
-	/* Set NAS to turn back on after a power failure */
-	dnskw_gpio_register(37, "dnskw:power:recover", 1);
-}
diff --git a/trunk/arch/arm/mach-kirkwood/board-dt.c b/trunk/arch/arm/mach-kirkwood/board-dt.c
index 10d1969b9e3a..f7fe1b9f3170 100644
--- a/trunk/arch/arm/mach-kirkwood/board-dt.c
+++ b/trunk/arch/arm/mach-kirkwood/board-dt.c
@@ -56,24 +56,11 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("globalscale,dreamplug"))
 		dreamplug_init();
 
-	if (of_machine_is_compatible("dlink,dns-kirkwood"))
-		dnskw_init();
-
-	if (of_machine_is_compatible("iom,iconnect"))
-		iconnect_init();
-
-	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
-		ib62x0_init();
-
 	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char *kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
-	"dlink,dns-320",
-	"dlink,dns-325",
-	"iom,iconnect",
-	"raidsonic,ib-nas62x0",
 	NULL
 };
 
diff --git a/trunk/arch/arm/mach-kirkwood/board-ib62x0.c b/trunk/arch/arm/mach-kirkwood/board-ib62x0.c
deleted file mode 100644
index eddf1df8891f..000000000000
--- a/trunk/arch/arm/mach-kirkwood/board-ib62x0.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
- *
- * arch/arm/mach-kirkwood/board-ib62x0.c
- *
- * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-#define IB62X0_GPIO_POWER_OFF	24
-
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data ib62x0_sata_data = {
-	.n_ports	= 2,
-};
-
-static unsigned int ib62x0_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP22_GPIO,	/* OS LED red */
-	MPP24_GPIO,	/* Power off device */
-	MPP25_GPIO,	/* OS LED green */
-	MPP27_GPIO,	/* USB transfer LED */
-	MPP28_GPIO,	/* Reset button */
-	MPP29_GPIO,	/* USB Copy button */
-	0
-};
-
-static struct gpio_led ib62x0_led_pins[] = {
-	{
-		.name			= "ib62x0:green:os",
-		.default_trigger	= "default-on",
-		.gpio			= 25,
-		.active_low		= 0,
-	},
-	{
-		.name			= "ib62x0:red:os",
-		.default_trigger	= "none",
-		.gpio			= 22,
-		.active_low		= 0,
-	},
-	{
-		.name			= "ib62x0:red:usb_copy",
-		.default_trigger	= "none",
-		.gpio			= 27,
-		.active_low		= 0,
-	},
-};
-
-static struct gpio_led_platform_data ib62x0_led_data = {
-	.leds		= ib62x0_led_pins,
-	.num_leds	= ARRAY_SIZE(ib62x0_led_pins),
-};
-
-static struct platform_device ib62x0_led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &ib62x0_led_data,
-	}
-};
-
-static struct gpio_keys_button ib62x0_button_pins[] = {
-	{
-		.code		= KEY_COPY,
-		.gpio		= 29,
-		.desc		= "USB Copy",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 28,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data ib62x0_button_data = {
-	.buttons	= ib62x0_button_pins,
-	.nbuttons	= ARRAY_SIZE(ib62x0_button_pins),
-};
-
-static struct platform_device ib62x0_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ib62x0_button_data,
-	}
-};
-
-static void ib62x0_power_off(void)
-{
-	gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
-}
-
-void __init ib62x0_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_mpp_conf(ib62x0_mpp_config);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&ib62x0_ge00_data);
-	kirkwood_sata_init(&ib62x0_sata_data);
-	platform_device_register(&ib62x0_led_device);
-	platform_device_register(&ib62x0_button_device);
-	if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
-	    gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = ib62x0_power_off;
-	else
-		pr_err("board-ib62x0: failed to configure power-off GPIO\n");
-}
diff --git a/trunk/arch/arm/mach-kirkwood/board-iconnect.c b/trunk/arch/arm/mach-kirkwood/board-iconnect.c
deleted file mode 100644
index 2222c5739519..000000000000
--- a/trunk/arch/arm/mach-kirkwood/board-iconnect.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iconnect.c
- *
- * Iomega i-connect Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct gpio_led iconnect_led_pins[] = {
-	{
-		.name		= "led_level",
-		.gpio		= 41,
-		.default_trigger = "default-on",
-	}, {
-		.name		= "power:blue",
-		.gpio		= 42,
-		.default_trigger = "timer",
-	}, {
-		.name		= "power:red",
-		.gpio		= 43,
-	}, {
-		.name		= "usb1:blue",
-		.gpio		= 44,
-	}, {
-		.name		= "usb2:blue",
-		.gpio		= 45,
-	}, {
-		.name		= "usb3:blue",
-		.gpio		= 46,
-	}, {
-		.name		= "usb4:blue",
-		.gpio		= 47,
-	}, {
-		.name		= "otb:blue",
-		.gpio		= 48,
-	},
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
-	.leds		= iconnect_led_pins,
-	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
-	.gpio_blink_set	= orion_gpio_led_blink_set,
-};
-
-static struct platform_device iconnect_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &iconnect_led_data,
-	}
-};
-
-static unsigned int iconnect_mpp_config[] __initdata = {
-	MPP12_GPIO,
-	MPP35_GPIO,
-	MPP41_GPIO,
-	MPP42_GPIO,
-	MPP43_GPIO,
-	MPP44_GPIO,
-	MPP45_GPIO,
-	MPP46_GPIO,
-	MPP47_GPIO,
-	MPP48_GPIO,
-	0
-};
-
-static struct i2c_board_info __initdata iconnect_board_info[] = {
-	{
-		I2C_BOARD_INFO("lm63", 0x4c),
-	},
-};
-
-static struct mtd_partition iconnect_nand_parts[] = {
-	{
-		.name = "flash",
-		.offset = 0,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-/* yikes... theses are the original input buttons */
-/* but I'm not convinced by the sw event choices  */
-static struct gpio_keys_button iconnect_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= SW_LID,
-		.gpio		= 12,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	}, {
-		.type		= EV_SW,
-		.code		= SW_TABLET_MODE,
-		.gpio		= 35,
-		.desc		= "OTB Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-	.buttons	= iconnect_buttons,
-	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev        = {
-		.platform_data  = &iconnect_button_data,
-	},
-};
-
-void __init iconnect_init(void)
-{
-	kirkwood_mpp_conf(iconnect_mpp_config);
-	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, iconnect_board_info,
-		ARRAY_SIZE(iconnect_board_info));
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&iconnect_ge00_data);
-
-	platform_device_register(&iconnect_button_device);
-	platform_device_register(&iconnect_leds);
-}
-
-static int __init iconnect_pci_init(void)
-{
-	if (of_machine_is_compatible("iom,iconnect"))
-		kirkwood_pcie_init(KW_PCIE0);
-	return 0;
-}
-subsys_initcall(iconnect_pci_init);
diff --git a/trunk/arch/arm/mach-kirkwood/common.c b/trunk/arch/arm/mach-kirkwood/common.c
index 3ad037385a5e..a02cae881f2f 100644
--- a/trunk/arch/arm/mach-kirkwood/common.c
+++ b/trunk/arch/arm/mach-kirkwood/common.c
@@ -15,7 +15,6 @@
 #include <linux/ata_platform.h>
 #include <linux/mtd/nand.h>
 #include <linux/dma-mapping.h>
-#include <linux/of.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
@@ -483,9 +482,6 @@ static int __init kirkwood_clock_gate(void)
 	unsigned int curr = readl(CLOCK_GATING_CTRL);
 	u32 dev, rev;
 
-#ifdef CONFIG_OF
-	struct device_node *np;
-#endif
 	kirkwood_pcie_id(&dev, &rev);
 	printk(KERN_DEBUG "Gating clock of unused units\n");
 	printk(KERN_DEBUG "before: 0x%08x\n", curr);
@@ -493,14 +489,6 @@ static int __init kirkwood_clock_gate(void)
 	/* Make sure those units are accessible */
 	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
 
-#ifdef CONFIG_OF
-	np = of_find_compatible_node(NULL, NULL, "mrvl,orion-nand");
-	if (np && of_device_is_available(np)) {
-		kirkwood_clk_ctrl |= CGC_RUNIT;
-		of_node_put(np);
-	}
-#endif
-
 	/* For SATA: first shutdown the phy */
 	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
 		/* Disable PLL and IVREF */
diff --git a/trunk/arch/arm/mach-kirkwood/common.h b/trunk/arch/arm/mach-kirkwood/common.h
index a34c41a5172e..fa8e7689c436 100644
--- a/trunk/arch/arm/mach-kirkwood/common.h
+++ b/trunk/arch/arm/mach-kirkwood/common.h
@@ -58,24 +58,6 @@ void dreamplug_init(void);
 static inline void dreamplug_init(void) {};
 #endif
 
-#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
-void dnskw_init(void);
-#else
-static inline void dnskw_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_ICONNECT_DT
-void iconnect_init(void);
-#else
-static inline void iconnect_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_IB62X0_DT
-void ib62x0_init(void);
-#else
-static inline void ib62x0_init(void) {};
-#endif
-
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
diff --git a/trunk/arch/arm/mach-mmp/Kconfig b/trunk/arch/arm/mach-mmp/Kconfig
index fa03974fd838..5a90b9a3ab6e 100644
--- a/trunk/arch/arm/mach-mmp/Kconfig
+++ b/trunk/arch/arm/mach-mmp/Kconfig
@@ -113,11 +113,4 @@ config CPU_MMP2
 	select CPU_PJ4
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
-
-config USB_EHCI_MV_U2O
-        bool "EHCI support for PXA USB OTG controller"
-	depends on USB_EHCI_MV
-	help
-	  Enables support for OTG controller which can be switched to host mode.
-
 endif
diff --git a/trunk/arch/arm/mach-mmp/aspenite.c b/trunk/arch/arm/mach-mmp/aspenite.c
index 223090b1444d..bf5d8e195c3e 100644
--- a/trunk/arch/arm/mach-mmp/aspenite.c
+++ b/trunk/arch/arm/mach-mmp/aspenite.c
@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -222,21 +221,6 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 	.debounce_interval	= 30,
 };
 
-#if defined(CONFIG_USB_EHCI_MV)
-static char *pxa168_sph_clock_name[] = {
-	[0] = "PXA168-USBCLK",
-};
-
-static struct mv_usb_platform_data pxa168_sph_pdata = {
-	.clknum         = 1,
-	.clkname        = pxa168_sph_clock_name,
-	.mode           = MV_USB_MODE_HOST,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -252,10 +236,6 @@ static void __init common_init(void)
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
-
-#if defined(CONFIG_USB_EHCI_MV)
-	pxa168_add_usb_host(&pxa168_sph_pdata);
-#endif
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
diff --git a/trunk/arch/arm/mach-mmp/devices.c b/trunk/arch/arm/mach-mmp/devices.c
index dd2d8b103cc8..191d9dea8731 100644
--- a/trunk/arch/arm/mach-mmp/devices.c
+++ b/trunk/arch/arm/mach-mmp/devices.c
@@ -9,13 +9,9 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/delay.h>
 
 #include <asm/irq.h>
-#include <mach/irqs.h>
 #include <mach/devices.h>
-#include <mach/cputype.h>
-#include <mach/regs-usb.h>
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -71,281 +67,3 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 
 	return platform_device_add(pdev);
 }
-
-#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
-
-/*****************************************************************************
- * The registers read/write routines
- *****************************************************************************/
-
-static unsigned int u2o_get(void __iomem *base, unsigned int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static void u2o_set(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg |= value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_clear(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg &= ~value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_write(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	writel_relaxed(value, base + offset);
-	readl_relaxed(base + offset);
-}
-
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
-
-#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
-
-static DEFINE_MUTEX(phy_lock);
-static int phy_init_cnt;
-
-static int usb_phy_init_internal(void __iomem *base)
-{
-	int loops;
-
-	pr_info("Init usb phy!!!\n");
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1<<UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
-		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
-		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
-		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
-		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
-		| UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
-		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
-		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
-		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/* fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(400);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(400);
-
-	/* Make sure PHY PLL is ready */
-	loops = 0;
-	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
-		mdelay(1);
-		loops++;
-		if (loops > 100) {
-			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
-				u2o_get(base, UTMI_PLL));
-			break;
-		}
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-
-	return 0;
-}
-
-static int usb_phy_deinit_internal(void __iomem *base)
-{
-	pr_info("Deinit usb phy!!!\n");
-
-	if (cpu_is_pxa168())
-		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
-
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-
-	return 0;
-}
-
-int pxa_usb_phy_init(void __iomem *phy_reg)
-{
-	mutex_lock(&phy_lock);
-	if (phy_init_cnt++ == 0)
-		usb_phy_init_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-	return 0;
-}
-
-void pxa_usb_phy_deinit(void __iomem *phy_reg)
-{
-	WARN_ON(phy_init_cnt == 0);
-
-	mutex_lock(&phy_lock);
-	if (--phy_init_cnt == 0)
-		usb_phy_deinit_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-}
-#endif
-#endif
-#endif
-
-#ifdef CONFIG_USB_SUPPORT
-static u64 usb_dma_mask = ~(u32)0;
-
-#ifdef CONFIG_USB_MV_UDC
-struct resource pxa168_u2o_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2o = {
-	.name		= "mv-udc",
-	.id		= -1,
-	.resource	= pxa168_u2o_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_USB_MV_UDC */
-
-#ifdef CONFIG_USB_EHCI_MV_U2O
-struct resource pxa168_u2oehci_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2oehci = {
-	.name		= "pxa-u2oehci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
-	.resource	= pxa168_u2oehci_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_MV_OTG)
-struct resource pxa168_u2ootg_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2ootg = {
-	.name		= "mv-otg",
-	.id		= -1,
-	.dev  = {
-		.dma_mask          = &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
-	.resource      = pxa168_u2ootg_resources,
-};
-#endif /* CONFIG_USB_MV_OTG */
-
-#endif
diff --git a/trunk/arch/arm/mach-mmp/include/mach/devices.h b/trunk/arch/arm/mach-mmp/include/mach/devices.h
index 21217ef11b64..d0ec7dae88e4 100644
--- a/trunk/arch/arm/mach-mmp/include/mach/devices.h
+++ b/trunk/arch/arm/mach-mmp/include/mach/devices.h
@@ -50,7 +50,4 @@ struct pxa_device_desc mmp2_device_##_name __initdata = {		\
 }
 
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
-extern int pxa_usb_phy_init(void __iomem *phy_reg);
-extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
-
 #endif /* __MACH_DEVICE_H */
diff --git a/trunk/arch/arm/mach-mmp/include/mach/pxa168.h b/trunk/arch/arm/mach-mmp/include/mach/pxa168.h
index 09dcd6e2b6a8..dc03d580a06d 100644
--- a/trunk/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/trunk/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -16,7 +16,6 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <plat/pxa27x_keypad.h>
 #include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
-#include <linux/platform_data/mv_usb.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -37,9 +36,12 @@ extern struct pxa_device_desc pxa168_device_fb;
 extern struct pxa_device_desc pxa168_device_keypad;
 extern struct pxa_device_desc pxa168_device_eth;
 
+struct pxa168_usb_pdata {
+	/* If NULL, default phy init routine for PXA168 would be called */
+	int (*phy_init)(void __iomem *usb_phy_reg_base);
+};
 /* pdata can be NULL */
-extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
-
+int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
 
 extern struct platform_device pxa168_device_gpio;
 
diff --git a/trunk/arch/arm/mach-mmp/include/mach/pxa910.h b/trunk/arch/arm/mach-mmp/include/mach/pxa910.h
index 793634c837ef..e2e1f1e5e124 100644
--- a/trunk/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/trunk/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -20,9 +20,6 @@ extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
-extern struct platform_device pxa168_device_u2o;
-extern struct platform_device pxa168_device_u2ootg;
-extern struct platform_device pxa168_device_u2oehci;
 
 extern struct platform_device pxa910_device_gpio;
 extern struct platform_device pxa910_device_rtc;
diff --git a/trunk/arch/arm/mach-mmp/include/mach/regs-usb.h b/trunk/arch/arm/mach-mmp/include/mach/regs-usb.h
deleted file mode 100644
index b047bf487506..000000000000
--- a/trunk/arch/arm/mach-mmp/include/mach/regs-usb.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-#define PXA168_U2O_REGBASE	(0xd4208000)
-#define PXA168_U2O_PHYBASE	(0xd4207000)
-
-#define PXA168_U2H_REGBASE      (0xd4209000)
-#define PXA168_U2H_PHYBASE      (0xd4206000)
-
-#define MMP3_HSIC1_REGBASE	(0xf0001000)
-#define MMP3_HSIC1_PHYBASE	(0xf0001800)
-
-#define MMP3_HSIC2_REGBASE	(0xf0002000)
-#define MMP3_HSIC2_PHYBASE	(0xf0002800)
-
-#define MMP3_FSIC_REGBASE	(0xf0003000)
-#define MMP3_FSIC_PHYBASE	(0xf0003800)
-
-
-#define USB_REG_RANGE		(0x1ff)
-#define USB_PHY_RANGE		(0xff)
-
-/* registers */
-#define U2x_CAPREGS_OFFSET       0x100
-
-/* phy regs */
-#define UTMI_REVISION		0x0
-#define UTMI_CTRL		0x4
-#define UTMI_PLL		0x8
-#define UTMI_TX			0xc
-#define UTMI_RX			0x10
-#define UTMI_IVREF		0x14
-#define UTMI_T0			0x18
-#define UTMI_T1			0x1c
-#define UTMI_T2			0x20
-#define UTMI_T3			0x24
-#define UTMI_T4			0x28
-#define UTMI_T5			0x2c
-#define UTMI_RESERVE		0x30
-#define UTMI_USB_INT		0x34
-#define UTMI_DBG_CTL		0x38
-#define UTMI_OTG_ADDON		0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
-#define UTMI_CTRL_PU_REF_SHIFT			20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
-#define UTMI_CTRL_PWR_UP_SHIFT                  0
-
-/* For UTMI_PLL Register */
-#define UTMI_PLL_PLLCALI12_SHIFT		29
-#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
-
-#define UTMI_PLL_PLLVDD18_SHIFT			27
-#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
-
-#define UTMI_PLL_PLLVDD12_SHIFT			25
-#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
-
-#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
-#define CLK_BLK_EN                              (0x1 << 24)
-#define PLL_READY                               (0x1 << 23)
-#define KVCO_EXT                                (0x1 << 22)
-#define VCOCAL_START                            (0x1 << 21)
-
-#define UTMI_PLL_KVCO_SHIFT			15
-#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
-
-#define UTMI_PLL_ICP_SHIFT			12
-#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
-
-#define UTMI_PLL_FBDIV_SHIFT                    4
-#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
-
-#define UTMI_PLL_REFDIV_SHIFT                   0
-#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
-
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
-
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
-
-#define UTMI_TX_TXVDD12_SHIFT                   22
-#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
-
-#define UTMI_TX_CK60_PHSEL_SHIFT                17
-#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
-
-#define UTMI_TX_IMPCAL_VTH_SHIFT                14
-#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
-
-#define REG_RCAL_START                          (0x1 << 12)
-
-#define UTMI_TX_LOW_VDD_EN_SHIFT                11
-
-#define UTMI_TX_AMP_SHIFT			0
-#define UTMI_TX_AMP_MASK			(0x7 << 0)
-
-/* For UTMI_RX Register */
-#define UTMI_REG_SQ_LENGTH_SHIFT                15
-#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
-
-#define UTMI_RX_SQ_THRESH_SHIFT                 4
-#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
-
-#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
-
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0		0x4
-#define USB2_PLL_REG1		0x8
-#define USB2_TX_REG0		0x10
-#define USB2_TX_REG1		0x14
-#define USB2_TX_REG2		0x18
-#define USB2_RX_REG0		0x20
-#define USB2_RX_REG1		0x24
-#define USB2_RX_REG2		0x28
-#define USB2_ANA_REG0		0x30
-#define USB2_ANA_REG1		0x34
-#define USB2_ANA_REG2		0x38
-#define USB2_DIG_REG0		0x3C
-#define USB2_DIG_REG1		0x40
-#define USB2_DIG_REG2		0x44
-#define USB2_DIG_REG3		0x48
-#define USB2_TEST_REG0		0x4C
-#define USB2_TEST_REG1		0x50
-#define USB2_TEST_REG2		0x54
-#define USB2_CHARGER_REG0	0x58
-#define USB2_OTG_REG0		0x5C
-#define USB2_PHY_MON0		0x60
-#define USB2_RESETVE_REG0	0x64
-#define USB2_ICID_REG0		0x78
-#define USB2_ICID_REG1		0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3		0
-#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3		8
-#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3		12
-#define USB2_PLL_VDD18_SHIFT_MMP3		14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3		0
-#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3		4
-#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3			8
-#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
-#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3		13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3			4
-#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3		8
-#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT		10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
-#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
-
-/* fsic registers */
-#define FSIC_MISC			0x4
-#define FSIC_INT			0x28
-#define FSIC_CTRL			0x30
-
-/* HSIC registers */
-#define HSIC_PAD_CTRL			0x4
-
-#define HSIC_CTRL			0x8
-#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
-#define HSIC_CTRL_PLL_BYPASS		(1<<4)
-
-#define TEST_GRP_0			0xc
-#define TEST_GRP_1			0x10
-
-#define HSIC_INT			0x14
-#define HSIC_INT_READY_INT_EN		(1<<10)
-#define HSIC_INT_CONNECT_INT_EN		(1<<9)
-#define HSIC_INT_CORE_INT_EN		(1<<8)
-#define HSIC_INT_HS_READY		(1<<2)
-#define HSIC_INT_CONNECT		(1<<1)
-#define HSIC_INT_CORE			(1<<0)
-
-#define HSIC_CONFIG			0x18
-#define USBHSIC_CTRL			0x20
-
-#define HSIC_USB_CTRL			0x28
-#define HSIC_USB_CTRL_CLKEN		1
-#define	HSIC_USB_CLK_PHY		0x0
-#define HSIC_USB_CLK_PMU		0x1
-
-#endif /* __ASM_ARCH_PXA_U2O_H */
diff --git a/trunk/arch/arm/mach-mmp/pxa168.c b/trunk/arch/arm/mach-mmp/pxa168.c
index 62d787c34475..b24d2c32cba9 100644
--- a/trunk/arch/arm/mach-mmp/pxa168.c
+++ b/trunk/arch/arm/mach-mmp/pxa168.c
@@ -14,7 +14,6 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
-#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
@@ -28,7 +27,6 @@
 #include <mach/mfp.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
-#include <mach/regs-usb.h>
 
 #include "common.h"
 #include "clock.h"
@@ -95,7 +93,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
+	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
@@ -186,17 +184,17 @@ struct platform_device pxa168_device_gpio = {
 struct resource pxa168_usb_host_resources[] = {
 	/* USB Host conroller register base */
 	[0] = {
-		.start	= PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2H_REGBASE + USB_REG_RANGE,
+		.start	= 0xd4209000,
+		.end	= 0xd4209000 + 0x200,
 		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
+		.name	= "pxa168-usb-host",
 	},
 	/* USB PHY register base */
 	[1] = {
-		.start	= PXA168_U2H_PHYBASE,
-		.end	= PXA168_U2H_PHYBASE + USB_PHY_RANGE,
+		.start	= 0xd4206000,
+		.end	= 0xd4206000 + 0xff,
 		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
+		.name	= "pxa168-usb-phy",
 	},
 	[2] = {
 		.start	= IRQ_PXA168_USB2,
@@ -207,7 +205,7 @@ struct resource pxa168_usb_host_resources[] = {
 
 static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
 struct platform_device pxa168_device_usb_host = {
-	.name = "pxa-sph",
+	.name = "pxa168-ehci",
 	.id   = -1,
 	.dev  = {
 		.dma_mask = &pxa168_usb_host_dmamask,
@@ -218,7 +216,7 @@ struct platform_device pxa168_device_usb_host = {
 	.resource      = pxa168_usb_host_resources,
 };
 
-int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
+int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
 {
 	pxa168_device_usb_host.dev.platform_data = pdata;
 	return platform_device_register(&pxa168_device_usb_host);
diff --git a/trunk/arch/arm/mach-mmp/pxa910.c b/trunk/arch/arm/mach-mmp/pxa910.c
index 6da52e9f2bdc..43f8bcc29b67 100644
--- a/trunk/arch/arm/mach-mmp/pxa910.c
+++ b/trunk/arch/arm/mach-mmp/pxa910.c
@@ -109,7 +109,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
+	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
diff --git a/trunk/arch/arm/mach-mmp/ttc_dkb.c b/trunk/arch/arm/mach-mmp/ttc_dkb.c
index 266215393f44..3fc9ed21f97d 100644
--- a/trunk/arch/arm/mach-mmp/ttc_dkb.c
+++ b/trunk/arch/arm/mach-mmp/ttc_dkb.c
@@ -17,7 +17,6 @@
 #include <linux/interrupt.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -26,7 +25,6 @@
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
 #include <mach/irqs.h>
-#include <mach/regs-usb.h>
 
 #include "common.h"
 
@@ -146,26 +144,6 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
 	},
 };
 
-#ifdef CONFIG_USB_SUPPORT
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
-
-static char *pxa910_usb_clock_name[] = {
-	[0] = "U2OCLK",
-};
-
-static struct mv_usb_platform_data ttc_usb_pdata = {
-	.clknum		= 1,
-	.clkname	= pxa910_usb_clock_name,
-	.vbus		= NULL,
-	.mode		= MV_USB_MODE_OTG,
-	.otg_force_a_bus_req = 1,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-#endif
-
 static void __init ttc_dkb_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
@@ -176,21 +154,6 @@ static void __init ttc_dkb_init(void)
 	/* off-chip devices */
 	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
-
-#ifdef CONFIG_USB_MV_UDC
-	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2o);
-#endif
-
-#ifdef CONFIG_USB_EHCI_MV_U2O
-	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2oehci);
-#endif
-
-#ifdef CONFIG_USB_MV_OTG
-	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2ootg);
-#endif
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
diff --git a/trunk/arch/arm/mach-omap2/Kconfig b/trunk/arch/arm/mach-omap2/Kconfig
index 964ee67a3b77..8141b76283a6 100644
--- a/trunk/arch/arm/mach-omap2/Kconfig
+++ b/trunk/arch/arm/mach-omap2/Kconfig
@@ -17,7 +17,6 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select MENELAUS if ARCH_OMAP2
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
-	select HIGHMEM
 	help
 	  Compile a kernel suitable for booting most boards
 
diff --git a/trunk/arch/arm/mach-omap2/board-4430sdp.c b/trunk/arch/arm/mach-omap2/board-4430sdp.c
index 2e5066458f7f..130ab00c09a2 100644
--- a/trunk/arch/arm/mach-omap2/board-4430sdp.c
+++ b/trunk/arch/arm/mach-omap2/board-4430sdp.c
@@ -384,11 +384,6 @@ static struct platform_device sdp4430_dmic_codec = {
 	.id	= -1,
 };
 
-static struct platform_device sdp4430_hdmi_audio_codec = {
-	.name	= "hdmi-audio-codec",
-	.id	= -1,
-};
-
 static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
 	.card_name = "SDP4430",
 	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
@@ -423,7 +418,6 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_vbat,
 	&sdp4430_dmic_codec,
 	&sdp4430_abe_audio,
-	&sdp4430_hdmi_audio_codec,
 };
 
 static struct omap_musb_board_data musb_board_data = {
@@ -621,9 +615,7 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_VANA |
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG |
-			TWL_COMMON_REGULATOR_V1V8 |
-			TWL_COMMON_REGULATOR_V2V1);
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &sdp4430_twldata,
 			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/trunk/arch/arm/mach-omap2/board-am3517crane.c b/trunk/arch/arm/mach-omap2/board-am3517crane.c
index 3b8a53c1f2a8..c3851e8de28b 100644
--- a/trunk/arch/arm/mach-omap2/board-am3517crane.c
+++ b/trunk/arch/arm/mach-omap2/board-am3517crane.c
@@ -30,7 +30,6 @@
 #include "common.h"
 #include <plat/usb.h>
 
-#include "am35xx-emac.h"
 #include "mux.h"
 #include "control.h"
 
@@ -91,7 +90,6 @@ static void __init am3517_crane_init(void)
 	}
 
 	usbhs_init(&usbhs_bdata);
-	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
diff --git a/trunk/arch/arm/mach-omap2/board-cm-t35.c b/trunk/arch/arm/mach-omap2/board-cm-t35.c
index d8c35a3c0fb7..909a8b91b564 100644
--- a/trunk/arch/arm/mach-omap2/board-cm-t35.c
+++ b/trunk/arch/arm/mach-omap2/board-cm-t35.c
@@ -498,10 +498,6 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
 	.setup          = cm_t35_twl_gpio_setup,
 };
 
-static struct twl4030_power_data cm_t35_power_data = {
-	.use_poweroff	= true,
-};
-
 static struct twl4030_platform_data cm_t35_twldata = {
 	/* platform_data for children goes here */
 	.keypad		= &cm_t35_kp_data,
@@ -509,7 +505,6 @@ static struct twl4030_platform_data cm_t35_twldata = {
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
 	.vio		= &cm_t35_vio,
-	.power		= &cm_t35_power_data,
 };
 
 static void __init cm_t35_init_i2c(void)
diff --git a/trunk/arch/arm/mach-omap2/board-flash.c b/trunk/arch/arm/mach-omap2/board-flash.c
index 70a81f900bb5..0349fd2b68d8 100644
--- a/trunk/arch/arm/mach-omap2/board-flash.c
+++ b/trunk/arch/arm/mach-omap2/board-flash.c
@@ -87,7 +87,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
 };
 
-void
+static void
 __init board_onenand_init(struct mtd_partition *onenand_parts,
 				u8 nr_parts, u8 cs)
 {
@@ -98,7 +98,7 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 	gpmc_onenand_init(&board_onenand_data);
 }
 #else
-void
+static void
 __init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 {
 }
diff --git a/trunk/arch/arm/mach-omap2/board-flash.h b/trunk/arch/arm/mach-omap2/board-flash.h
index c44b70d52021..d25503a98417 100644
--- a/trunk/arch/arm/mach-omap2/board-flash.h
+++ b/trunk/arch/arm/mach-omap2/board-flash.h
@@ -47,14 +47,3 @@ static inline void board_nand_init(struct mtd_partition *nand_parts,
 {
 }
 #endif
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-extern void board_onenand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs);
-#else
-static inline void board_onenand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs)
-{
-}
-#endif
diff --git a/trunk/arch/arm/mach-omap2/board-igep0020.c b/trunk/arch/arm/mach-omap2/board-igep0020.c
index 55dfcccf1a8a..740cee9369ba 100644
--- a/trunk/arch/arm/mach-omap2/board-igep0020.c
+++ b/trunk/arch/arm/mach-omap2/board-igep0020.c
@@ -24,8 +24,6 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
-#include <linux/mtd/nand.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -41,8 +39,6 @@
 #include "hsmmc.h"
 #include "sdram-numonyx-m65kxxxxam.h"
 #include "common-board-devices.h"
-#include "board-flash.h"
-#include "control.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -64,10 +60,6 @@
 #define IGEP3_GPIO_LED1_RED	16
 #define IGEP3_GPIO_USBH_NRESET  183
 
-#define IGEP_SYSBOOT_MASK           0x1f
-#define IGEP_SYSBOOT_NAND           0x0f
-#define IGEP_SYSBOOT_ONENAND        0x10
-
 /*
  * IGEP2 Hardware Revision Table
  *
@@ -118,10 +110,8 @@ static void __init igep2_get_revision(void)
 	gpio_free(IGEP2_GPIO_LED1_RED);
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
-	defined(CONFIG_MTD_NAND_OMAP2) ||		\
-	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
 
 #define ONENAND_MAP             0x20000000
 
@@ -133,7 +123,7 @@ static void __init igep2_get_revision(void)
  * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
  */
 
-static struct mtd_partition igep_flash_partitions[] = {
+static struct mtd_partition igep_onenand_partitions[] = {
 	{
 		.name           = "X-Loader",
 		.offset         = 0,
@@ -161,28 +151,50 @@ static struct mtd_partition igep_flash_partitions[] = {
 	},
 };
 
-static inline u32 igep_get_sysboot_value(void)
-{
-	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
-}
+static struct omap_onenand_platform_data igep_onenand_data = {
+	.parts = igep_onenand_partitions,
+	.nr_parts = ARRAY_SIZE(igep_onenand_partitions),
+	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device igep_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+	.dev = {
+		.platform_data = &igep_onenand_data,
+	},
+};
 
 static void __init igep_flash_init(void)
 {
-	u32 mux;
-	mux = igep_get_sysboot_value();
-
-	if (mux == IGEP_SYSBOOT_NAND) {
-		pr_info("IGEP: initializing NAND memory device\n");
-		board_nand_init(igep_flash_partitions,
-				ARRAY_SIZE(igep_flash_partitions),
-				0, NAND_BUSWIDTH_16);
-	} else if (mux == IGEP_SYSBOOT_ONENAND) {
-		pr_info("IGEP: initializing OneNAND memory device\n");
-		board_onenand_init(igep_flash_partitions,
-				   ARRAY_SIZE(igep_flash_partitions), 0);
-	} else {
-		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
+	u8 cs = 0;
+	u8 onenandcs = GPMC_CS_NUM + 1;
+
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		u32 ret;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		/* Check if NAND/oneNAND is configured */
+		if ((ret & 0xC00) == 0x800)
+			/* NAND found */
+			pr_err("IGEP: Unsupported NAND found\n");
+		else {
+			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+				/* ONENAND found */
+				onenandcs = cs;
+		}
 	}
+
+	if (onenandcs > GPMC_CS_NUM) {
+		pr_err("IGEP: Unable to find configuration in GPMC\n");
+		return;
+	}
+
+	igep_onenand_data.cs = onenandcs;
+
+	if (platform_device_register(&igep_onenand_device) < 0)
+		pr_err("IGEP: Unable to register OneNAND device\n");
 }
 
 #else
diff --git a/trunk/arch/arm/mach-omap2/board-omap3beagle.c b/trunk/arch/arm/mach-omap2/board-omap3beagle.c
index ae7d3a737baf..7be8d659d91d 100644
--- a/trunk/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/trunk/arch/arm/mach-omap2/board-omap3beagle.c
@@ -83,13 +83,11 @@ static struct {
 	int usb_pwr_level;
 	int reset_gpio;
 	int usr_button_gpio;
-	int mmc_caps;
 } beagle_config = {
 	.mmc1_gpio_wp = -EINVAL,
 	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
 	.reset_gpio = 129,
 	.usr_button_gpio = 4,
-	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 };
 
 static struct gpio omap3_beagle_rev_gpios[] __initdata = {
@@ -147,12 +145,10 @@ static void __init omap3_beagle_init_rev(void)
 		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
 		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
-		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
 		break;
 	case 2:
 		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
-		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
 		break;
 	default:
 		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@@ -255,7 +251,7 @@ static void __init beagle_display_init(void)
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 		.deferred	= true,
 	},
@@ -527,7 +523,6 @@ static void __init omap3_beagle_init(void)
 
 	if (beagle_config.mmc1_gpio_wp != -EINVAL)
 		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
-	mmc[0].caps = beagle_config.mmc_caps;
 	omap_hsmmc_init(mmc);
 
 	omap3_beagle_i2c_init();
diff --git a/trunk/arch/arm/mach-omap2/board-omap3logic.c b/trunk/arch/arm/mach-omap2/board-omap3logic.c
index c008bf8e1c36..9b3c141ff51b 100644
--- a/trunk/arch/arm/mach-omap2/board-omap3logic.c
+++ b/trunk/arch/arm/mach-omap2/board-omap3logic.c
@@ -4,9 +4,8 @@
  * Copyright (C) 2010 Li-Pro.Net
  * Stephan Linz <linz@li-pro.net>
  *
- * Copyright (C) 2010-2012 Logic Product Development, Inc.
+ * Copyright (C) 2010 Logic Product Development, Inc.
  * Peter Barada <peter.barada@logicpd.com>
- * Ashwin BIhari <ashwin.bihari@logicpd.com>
  *
  * Modified from Beagle, EVM, and RX51
  *
@@ -46,7 +45,6 @@
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
-#include <plat/usb.h>
 
 #define OMAP3LOGIC_SMSC911X_CS			1
 
@@ -87,11 +85,6 @@ static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
 			| BIT(13) | BIT(15) | BIT(16) | BIT(17),
 };
 
-static struct twl4030_usb_data omap3logic_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-
 static struct twl4030_platform_data omap3logic_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -99,7 +92,6 @@ static struct twl4030_platform_data omap3logic_twldata = {
 	/* platform_data for children goes here */
 	.gpio		= &omap3logic_gpio_data,
 	.vmmc1		= &omap3logic_vmmc1,
-	.usb		= &omap3logic_usb_data,
 };
 
 static int __init omap3logic_i2c_init(void)
@@ -193,20 +185,6 @@ static inline void __init board_smsc911x_init(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
-	/* mUSB */
-	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
@@ -227,8 +205,6 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
-	usb_musb_init(NULL);
-
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/trunk/arch/arm/mach-omap2/board-omap4panda.c b/trunk/arch/arm/mach-omap2/board-omap4panda.c
index c1061d439fe9..1b782ba53433 100644
--- a/trunk/arch/arm/mach-omap2/board-omap4panda.c
+++ b/trunk/arch/arm/mach-omap2/board-omap4panda.c
@@ -28,7 +28,6 @@
 #include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
-#include <linux/ti_wilink_st.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -59,21 +58,12 @@
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
 /* wl127x BT, FM, GPS connectivity chip */
-static struct ti_st_plat_data wilink_platform_data = {
-	.nshutdown_gpio	= 46,
-	.dev_name	= "/dev/ttyO1",
-	.flow_cntrl	= 1,
-	.baud_rate	= 3000000,
-	.chip_enable	= NULL,
-	.suspend	= NULL,
-	.resume		= NULL,
-};
-
+static int wl1271_gpios[] = {46, -1, -1};
 static struct platform_device wl1271_device = {
 	.name	= "kim",
 	.id	= -1,
 	.dev	= {
-		.platform_data	= &wilink_platform_data,
+		.platform_data	= &wl1271_gpios,
 	},
 };
 
@@ -127,11 +117,6 @@ static struct platform_device panda_abe_audio = {
 	},
 };
 
-static struct platform_device panda_hdmi_audio_codec = {
-	.name	= "hdmi-audio-codec",
-	.id	= -1,
-};
-
 static struct platform_device btwilink_device = {
 	.name	= "btwilink",
 	.id	= -1,
@@ -141,7 +126,6 @@ static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
 	&wl1271_device,
 	&panda_abe_audio,
-	&panda_hdmi_audio_codec,
 	&btwilink_device,
 };
 
@@ -339,9 +323,7 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_VANA |
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG |
-			TWL_COMMON_REGULATOR_V1V8 |
-			TWL_COMMON_REGULATOR_V2V1);
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &omap4_panda_twldata,
 			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c b/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c
index 415a4b7e86b8..d87ee0612098 100644
--- a/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -44,7 +44,6 @@
 #include <linux/leds-lp5523.h>
 
 #include <../drivers/staging/iio/light/tsl2563.h>
-#include <linux/lis3lv02d.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -64,9 +63,6 @@
 #define RX51_TSC2005_RESET_GPIO         104
 #define RX51_TSC2005_IRQ_GPIO           100
 
-#define LIS302_IRQ1_GPIO 181
-#define LIS302_IRQ2_GPIO 180  /* Not yet in use */
-
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
@@ -77,77 +73,6 @@ enum {
 static struct wl12xx_platform_data wl1251_pdata;
 static struct tsc2005_platform_data tsc2005_pdata;
 
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-static int lis302_setup(void)
-{
-	int err;
-	int irq1 = LIS302_IRQ1_GPIO;
-	int irq2 = LIS302_IRQ2_GPIO;
-
-	/* gpio for interrupt pin 1 */
-	err = gpio_request(irq1, "lis3lv02dl_irq1");
-	if (err) {
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	/* gpio for interrupt pin 2 */
-	err = gpio_request(irq2, "lis3lv02dl_irq2");
-	if (err) {
-		gpio_free(irq1);
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	gpio_direction_input(irq1);
-	gpio_direction_input(irq2);
-
-out:
-	return err;
-}
-
-static int lis302_release(void)
-{
-	gpio_free(LIS302_IRQ1_GPIO);
-	gpio_free(LIS302_IRQ2_GPIO);
-
-	return 0;
-}
-
-static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
-	.click_flags    = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	/* Limits are 0.5g * value */
-	.click_thresh_x = 8,
-	.click_thresh_y = 8,
-	.click_thresh_z = 10,
-	/* Click must be longer than time limit */
-	.click_time_limit = 9,
-	/* Kind of debounce filter */
-	.click_latency    = 50,
-
-	/* Limits for all axis. millig-value / 18 to get HW values */
-	.wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI,
-	.wakeup_thresh = 800 / 18,
-	.wakeup_flags2 = LIS3_WAKEUP_Z_HI ,
-	.wakeup_thresh2 = 900 / 18,
-
-	.hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE,
-
-	/* Interrupt line 2 for click detection, line 1 for thresholds */
-	.irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12,
-
-	.axis_x = LIS3_DEV_X,
-	.axis_y = LIS3_INV_DEV_Y,
-	.axis_z = LIS3_INV_DEV_Z,
-	.setup_resources = lis302_setup,
-	.release_resources = lis302_release,
-	.st_min_limits = {-32, 3, 3},
-	.st_max_limits = {-3, 32, 32},
-	.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
-};
-#endif
-
 #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
 static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
 	.cover_comp_gain = 16,
@@ -1025,16 +950,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	}
 };
 
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-	{
-		I2C_BOARD_INFO("lis3lv02d", 0x1d),
-		.platform_data = &rx51_lis3lv02d_data,
-		.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
-	},
-#endif
-};
-
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
@@ -1056,8 +971,7 @@ static int __init rx51_i2c_init(void)
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
-	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
+	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
 }
 
diff --git a/trunk/arch/arm/mach-omap2/devices.c b/trunk/arch/arm/mach-omap2/devices.c
index 17dacefaa7ef..e4336035c0ea 100644
--- a/trunk/arch/arm/mach-omap2/devices.c
+++ b/trunk/arch/arm/mach-omap2/devices.c
@@ -355,36 +355,6 @@ static void __init omap_init_dmic(void)
 static inline void omap_init_dmic(void) {}
 #endif
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
-		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
-
-static struct platform_device omap_hdmi_audio = {
-	.name	= "omap-hdmi-audio",
-	.id	= -1,
-};
-
-static void __init omap_init_hdmi_audio(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("dss_hdmi");
-	if (!oh) {
-		printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n");
-		return;
-	}
-
-	pdev = omap_device_build("omap-hdmi-audio-dai",
-		-1, oh, NULL, 0, NULL, 0, 0);
-	WARN(IS_ERR(pdev),
-	     "Can't build omap_device for omap-hdmi-audio-dai.\n");
-
-	platform_device_register(&omap_hdmi_audio);
-}
-#else
-static inline void omap_init_hdmi_audio(void) {}
-#endif
-
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <plat/mcspi.h>
@@ -734,7 +704,6 @@ static int __init omap2_init_devices(void)
 	omap_init_mcpdm();
 	omap_init_dmic();
 	omap_init_camera();
-	omap_init_hdmi_audio();
 	omap_init_mbox();
 	omap_init_mcspi();
 	omap_init_pmu();
diff --git a/trunk/arch/arm/mach-omap2/twl-common.c b/trunk/arch/arm/mach-omap2/twl-common.c
index 119d5a910f3a..7a7b89304c48 100644
--- a/trunk/arch/arm/mach-omap2/twl-common.c
+++ b/trunk/arch/arm/mach-omap2/twl-common.c
@@ -31,7 +31,6 @@
 
 #include "twl-common.h"
 #include "pm.h"
-#include "voltage.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@@ -48,18 +47,6 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
 	},
 };
 
-static int twl_set_voltage(void *data, int target_uV)
-{
-	struct voltagedomain *voltdm = (struct voltagedomain *)data;
-	return voltdm_scale(voltdm, target_uV);
-}
-
-static int twl_get_voltage(void *data)
-{
-	struct voltagedomain *voltdm = (struct voltagedomain *)data;
-	return voltdm_get_voltage(voltdm);
-}
-
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
@@ -166,48 +153,6 @@ static struct regulator_init_data omap3_vpll2_idata = {
 	.consumer_supplies		= omap3_vpll2_supplies,
 };
 
-static struct regulator_consumer_supply omap3_vdd1_supply[] = {
-	REGULATOR_SUPPLY("vcc", "mpu.0"),
-};
-
-static struct regulator_consumer_supply omap3_vdd2_supply[] = {
-	REGULATOR_SUPPLY("vcc", "l3_main.0"),
-};
-
-static struct regulator_init_data omap3_vdd1 = {
-	.constraints = {
-		.name			= "vdd_mpu_iva",
-		.min_uV			= 600000,
-		.max_uV			= 1450000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd1_supply),
-	.consumer_supplies		= omap3_vdd1_supply,
-};
-
-static struct regulator_init_data omap3_vdd2 = {
-	.constraints = {
-		.name			= "vdd_core",
-		.min_uV			= 600000,
-		.max_uV			= 1450000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd2_supply),
-	.consumer_supplies		= omap3_vdd2_supply,
-};
-
-static struct twl_regulator_driver_data omap3_vdd1_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct twl_regulator_driver_data omap3_vdd2_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
 void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {
@@ -215,16 +160,6 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 		pmic_data->irq_base = TWL4030_IRQ_BASE;
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL4030_IRQ_END;
-	if (!pmic_data->vdd1) {
-		omap3_vdd1.driver_data = &omap3_vdd1_drvdata;
-		omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva");
-		pmic_data->vdd1 = &omap3_vdd1;
-	}
-	if (!pmic_data->vdd2) {
-		omap3_vdd2.driver_data = &omap3_vdd2_drvdata;
-		omap3_vdd2_drvdata.data = voltdm_lookup("core");
-		pmic_data->vdd2 = &omap3_vdd2;
-	}
 
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
@@ -266,7 +201,6 @@ static struct regulator_init_data omap4_vdac_idata = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.supply_regulator	= "V2V1",
 };
 
 static struct regulator_init_data omap4_vaux2_idata = {
@@ -357,7 +291,6 @@ static struct regulator_init_data omap4_vcxio_idata = {
 	},
 	.num_consumer_supplies	= ARRAY_SIZE(omap4_vcxio_supply),
 	.consumer_supplies	= omap4_vcxio_supply,
-	.supply_regulator	= "V2V1",
 };
 
 static struct regulator_init_data omap4_vusb_idata = {
@@ -377,105 +310,6 @@ static struct regulator_init_data omap4_clk32kg_idata = {
 	},
 };
 
-static struct regulator_consumer_supply omap4_vdd1_supply[] = {
-	REGULATOR_SUPPLY("vcc", "mpu.0"),
-};
-
-static struct regulator_consumer_supply omap4_vdd2_supply[] = {
-	REGULATOR_SUPPLY("vcc", "iva.0"),
-};
-
-static struct regulator_consumer_supply omap4_vdd3_supply[] = {
-	REGULATOR_SUPPLY("vcc", "l3_main.0"),
-};
-
-static struct regulator_init_data omap4_vdd1 = {
-	.constraints = {
-		.name			= "vdd_mpu",
-		.min_uV			= 500000,
-		.max_uV			= 1500000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd1_supply),
-	.consumer_supplies		= omap4_vdd1_supply,
-};
-
-static struct regulator_init_data omap4_vdd2 = {
-	.constraints = {
-		.name			= "vdd_iva",
-		.min_uV			= 500000,
-		.max_uV			= 1500000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd2_supply),
-	.consumer_supplies		= omap4_vdd2_supply,
-};
-
-static struct regulator_init_data omap4_vdd3 = {
-	.constraints = {
-		.name			= "vdd_core",
-		.min_uV			= 500000,
-		.max_uV			= 1500000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd3_supply),
-	.consumer_supplies		= omap4_vdd3_supply,
-};
-
-
-static struct twl_regulator_driver_data omap4_vdd1_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct twl_regulator_driver_data omap4_vdd2_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct twl_regulator_driver_data omap4_vdd3_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct regulator_consumer_supply omap4_v1v8_supply[] = {
-	REGULATOR_SUPPLY("vio", "1-004b"),
-};
-
-static struct regulator_init_data omap4_v1v8_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-		.always_on		= true,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap4_v1v8_supply),
-	.consumer_supplies	= omap4_v1v8_supply,
-};
-
-static struct regulator_consumer_supply omap4_v2v1_supply[] = {
-	REGULATOR_SUPPLY("v2v1", "1-004b"),
-};
-
-static struct regulator_init_data omap4_v2v1_idata = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap4_v2v1_supply),
-	.consumer_supplies	= omap4_v2v1_supply,
-};
-
 void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {
@@ -484,24 +318,6 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL6030_IRQ_END;
 
-	if (!pmic_data->vdd1) {
-		omap4_vdd1.driver_data = &omap4_vdd1_drvdata;
-		omap4_vdd1_drvdata.data = voltdm_lookup("mpu");
-		pmic_data->vdd1 = &omap4_vdd1;
-	}
-
-	if (!pmic_data->vdd2) {
-		omap4_vdd2.driver_data = &omap4_vdd2_drvdata;
-		omap4_vdd2_drvdata.data = voltdm_lookup("iva");
-		pmic_data->vdd2 = &omap4_vdd2;
-	}
-
-	if (!pmic_data->vdd3) {
-		omap4_vdd3.driver_data = &omap4_vdd3_drvdata;
-		omap4_vdd3_drvdata.data = voltdm_lookup("core");
-		pmic_data->vdd3 = &omap4_vdd3;
-	}
-
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
 		pmic_data->usb = &omap4_usb_pdata;
@@ -534,11 +350,5 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 	if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
 	    !pmic_data->clk32kg)
 		pmic_data->clk32kg = &omap4_clk32kg_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8)
-		pmic_data->v1v8 = &omap4_v1v8_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1)
-		pmic_data->v2v1 = &omap4_v2v1_idata;
 }
 #endif /* CONFIG_ARCH_OMAP4 */
diff --git a/trunk/arch/arm/mach-omap2/twl-common.h b/trunk/arch/arm/mach-omap2/twl-common.h
index 8fe71cfd002c..09627483a57f 100644
--- a/trunk/arch/arm/mach-omap2/twl-common.h
+++ b/trunk/arch/arm/mach-omap2/twl-common.h
@@ -22,8 +22,6 @@
 #define TWL_COMMON_REGULATOR_VCXIO	(1 << 8)
 #define TWL_COMMON_REGULATOR_VUSB	(1 << 9)
 #define TWL_COMMON_REGULATOR_CLK32KG	(1 << 10)
-#define TWL_COMMON_REGULATOR_V1V8	(1 << 11)
-#define TWL_COMMON_REGULATOR_V2V1	(1 << 12)
 
 /* TWL4030 LDO regulators */
 #define TWL_COMMON_REGULATOR_VPLL1	(1 << 4)
diff --git a/trunk/arch/arm/mach-omap2/vc3xxx_data.c b/trunk/arch/arm/mach-omap2/vc3xxx_data.c
index 5d8eaf31569c..a5ec7f8f2ea8 100644
--- a/trunk/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/trunk/arch/arm/mach-omap2/vc3xxx_data.c
@@ -46,7 +46,6 @@ static struct omap_vc_common omap3_vc_common = {
 };
 
 struct omap_vc_channel omap3_vc_mpu = {
-	.flags = OMAP_VC_CHANNEL_DEFAULT,
 	.common = &omap3_vc_common,
 	.smps_sa_reg	 = OMAP3_PRM_VC_SMPS_SA_OFFSET,
 	.smps_volra_reg	 = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
diff --git a/trunk/arch/arm/mach-omap2/voltage.c b/trunk/arch/arm/mach-omap2/voltage.c
index 4dc60e83e00d..8a36342e60d2 100644
--- a/trunk/arch/arm/mach-omap2/voltage.c
+++ b/trunk/arch/arm/mach-omap2/voltage.c
@@ -73,8 +73,7 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 int voltdm_scale(struct voltagedomain *voltdm,
 		 unsigned long target_volt)
 {
-	int ret, i;
-	unsigned long volt = 0;
+	int ret;
 
 	if (!voltdm || IS_ERR(voltdm)) {
 		pr_warning("%s: VDD specified does not exist!\n", __func__);
@@ -87,23 +86,9 @@ int voltdm_scale(struct voltagedomain *voltdm,
 		return -ENODATA;
 	}
 
-	/* Adjust voltage to the exact voltage from the OPP table */
-	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
-		if (voltdm->volt_data[i].volt_nominal >= target_volt) {
-			volt = voltdm->volt_data[i].volt_nominal;
-			break;
-		}
-	}
-
-	if (!volt) {
-		pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n",
-			   __func__, target_volt);
-		return -EINVAL;
-	}
-
-	ret = voltdm->scale(voltdm, volt);
+	ret = voltdm->scale(voltdm, target_volt);
 	if (!ret)
-		voltdm->nominal_volt = volt;
+		voltdm->nominal_volt = target_volt;
 
 	return ret;
 }
diff --git a/trunk/arch/arm/mach-orion5x/dns323-setup.c b/trunk/arch/arm/mach-orion5x/dns323-setup.c
index 13d2bece1bae..c3ed15b8ea25 100644
--- a/trunk/arch/arm/mach-orion5x/dns323-setup.c
+++ b/trunk/arch/arm/mach-orion5x/dns323-setup.c
@@ -253,6 +253,27 @@ static int __init dns323_read_mac_addr(void)
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
 
+#define ORION_BLINK_HALF_PERIOD 100 /* ms */
+
+static int dns323_gpio_blink_set(unsigned gpio, int state,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+
+	if (delay_on && delay_off && !*delay_on && !*delay_off)
+		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
+
+	switch(state) {
+	case GPIO_LED_NO_BLINK_LOW:
+	case GPIO_LED_NO_BLINK_HIGH:
+		orion_gpio_set_blink(gpio, 0);
+		gpio_set_value(gpio, state);
+		break;
+	case GPIO_LED_BLINK:
+		orion_gpio_set_blink(gpio, 1);
+	}
+	return 0;
+}
+
 static struct gpio_led dns323ab_leds[] = {
 	{
 		.name = "power:blue",
@@ -291,13 +312,13 @@ static struct gpio_led dns323c_leds[] = {
 static struct gpio_led_platform_data dns323ab_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323ab_leds),
 	.leds		= dns323ab_leds,
-	.gpio_blink_set = orion_gpio_led_blink_set,
+	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
 static struct gpio_led_platform_data dns323c_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323c_leds),
 	.leds		= dns323c_leds,
-	.gpio_blink_set = orion_gpio_led_blink_set,
+	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
 static struct platform_device dns323_gpio_leds = {
diff --git a/trunk/arch/arm/mach-pxa/balloon3.c b/trunk/arch/arm/mach-pxa/balloon3.c
index c35456f02acb..56e8cebeb7d5 100644
--- a/trunk/arch/arm/mach-pxa/balloon3.c
+++ b/trunk/arch/arm/mach-pxa/balloon3.c
@@ -732,9 +732,7 @@ static inline void balloon3_nand_init(void) {}
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data balloon3_max1587a_v3_info = {
diff --git a/trunk/arch/arm/mach-pxa/cm-x300.c b/trunk/arch/arm/mach-pxa/cm-x300.c
index 313274016277..3e4e9fe2d462 100644
--- a/trunk/arch/arm/mach-pxa/cm-x300.c
+++ b/trunk/arch/arm/mach-pxa/cm-x300.c
@@ -713,9 +713,7 @@ struct da9030_battery_info cm_x300_battery_info = {
 };
 
 static struct regulator_consumer_supply buck2_consumers[] = {
-	{
-		.supply = "vcc_core",
-	},
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data buck2_data = {
diff --git a/trunk/arch/arm/mach-pxa/em-x270.c b/trunk/arch/arm/mach-pxa/em-x270.c
index 16ec557b8e43..a3a4a38d4972 100644
--- a/trunk/arch/arm/mach-pxa/em-x270.c
+++ b/trunk/arch/arm/mach-pxa/em-x270.c
@@ -1085,10 +1085,7 @@ static void __init em_x270_userspace_consumers_init(void)
 /* DA9030 related initializations */
 #define REGULATOR_CONSUMER(_name, _dev_name, _supply)		        \
 	static struct regulator_consumer_supply _name##_consumers[] = {	\
-		{							\
-			.dev_name = _dev_name,				\
-			.supply = _supply,				\
-		},							\
+		REGULATOR_SUPPLY(_supply, _dev_name),			\
 	}
 
 REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
diff --git a/trunk/arch/arm/mach-pxa/hx4700.c b/trunk/arch/arm/mach-pxa/hx4700.c
index 6bd692d271c1..88f0f51ad6d5 100644
--- a/trunk/arch/arm/mach-pxa/hx4700.c
+++ b/trunk/arch/arm/mach-pxa/hx4700.c
@@ -102,10 +102,6 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS_LPM_LOW,
 
-	/* STUART (IRDA) */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
 	/* PWM 1 (Backlight) */
 	GPIO17_PWM1_OUT,
 
@@ -129,7 +125,7 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO88_GPIO,
 
 	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
+	GPIO12_GPIO,	/* ASIC3_IRQ */
 	GPIO13_GPIO,	/* W3220_IRQ */
 	GPIO14_GPIO,	/* nWLAN_IRQ */
 
@@ -231,6 +227,7 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC0_LED0,		/* red */
 	ASIC3_GPIOC1_LED1,		/* green */
 	ASIC3_GPIOC2_LED2,		/* blue */
+	ASIC3_GPIOC4_CF_nCD,
 	ASIC3_GPIOC5_nCIOW,
 	ASIC3_GPIOC6_nCIOR,
 	ASIC3_GPIOC7_nPCE_1,
@@ -244,7 +241,6 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC15_nPIOR,
 
 	/* GPIOD: input GPIOs, CF */
-	ASIC3_GPIOD4_CF_nCD,
 	ASIC3_GPIOD11_nCIOIS16,
 	ASIC3_GPIOD12_nCWAIT,
 	ASIC3_GPIOD15_nPIOW,
@@ -295,7 +291,6 @@ static struct asic3_platform_data asic3_platform_data = {
 	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
 	.irq_base        = IRQ_BOARD_START,
 	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
-	.clock_rate      = 4000000,
 	.leds            = asic3_leds,
 };
 
@@ -685,12 +680,8 @@ static struct platform_device power_supply = {
  */
 
 static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
+	REGULATOR_SUPPLY("vbus_draw", NULL),
+	REGULATOR_SUPPLY("ac_draw", NULL),
 };
 
 static struct regulator_init_data bq24022_init_data = {
@@ -769,9 +760,8 @@ static struct platform_device strataflash = {
  * Maxim MAX1587A on PI2C
  */
 
-static struct regulator_consumer_supply max1587a_consumer = {
-	.supply = "vcc_core",
-};
+static struct regulator_consumer_supply max1587a_consumer =
+	REGULATOR_SUPPLY("vcc_core", NULL);
 
 static struct regulator_init_data max1587a_v3_info = {
 	.constraints = {
@@ -864,7 +854,6 @@ static void __init hx4700_init(void)
 	int ret;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
 	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
 	if (ret)
 		pr_err ("hx4700: Failed to request GPIOs.\n");
diff --git a/trunk/arch/arm/mach-pxa/include/mach/mioa701.h b/trunk/arch/arm/mach-pxa/include/mach/mioa701.h
index e57f5c724e8a..02868447b0b1 100644
--- a/trunk/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/trunk/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -61,9 +61,6 @@
 #define GPIO93_KEY_VOLUME_UP			93
 #define GPIO94_KEY_VOLUME_DOWN			94
 
-/* Camera */
-#define GPIO56_MT9M111_nOE			56
-
 extern struct input_dev *mioa701_evdev;
 extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
 
diff --git a/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 0260aaa2fc17..d72791695b26 100644
--- a/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -31,6 +31,7 @@
 #define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
 #define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
+#define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
@@ -68,13 +69,13 @@
 #define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
 #define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
 
-#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
 #define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
 #define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
 #define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
 #define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
 
-#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
 #define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
 #define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
 #define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
@@ -101,6 +102,32 @@
 #define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
 #define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
 
+#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __PCM990_CTRL_REG(x) \
+		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
 /*
  * IDE
  */
@@ -139,6 +166,24 @@
 #define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
 #define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
 
+#ifndef __ASSEMBLY__
+# define  __PCM990_IDE_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
 /*
  * Compact Flash
  */
@@ -151,6 +196,10 @@
 #define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
+#define PCM990_CF_PLD_BASE	0xef000000
+#define PCM990_CF_PLD_SIZE	(1*1024*1024)
+#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
 
 /* visible CPLD (U6) registers */
 #define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
@@ -190,6 +239,21 @@
 #define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
 #define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
 
+#ifndef __ASSEMBLY__
+#  define  __PCM990_CF_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
 /*
  * Wolfson AC97 Touch
  */
diff --git a/trunk/arch/arm/mach-pxa/magician.c b/trunk/arch/arm/mach-pxa/magician.c
index 8de0651d7efb..2db697cd2b4e 100644
--- a/trunk/arch/arm/mach-pxa/magician.c
+++ b/trunk/arch/arm/mach-pxa/magician.c
@@ -579,12 +579,8 @@ static struct platform_device power_supply = {
  */
 
 static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
+	REGULATOR_SUPPLY("vbus_draw", NULL),
+	REGULATOR_SUPPLY("ac_draw", NULL),
 };
 
 static struct regulator_init_data bq24022_init_data = {
diff --git a/trunk/arch/arm/mach-pxa/mioa701.c b/trunk/arch/arm/mach-pxa/mioa701.c
index 929c62b47b76..6745149aa9d5 100644
--- a/trunk/arch/arm/mach-pxa/mioa701.c
+++ b/trunk/arch/arm/mach-pxa/mioa701.c
@@ -103,7 +103,6 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO82_CIF_DD_5,
 	GPIO84_CIF_FV,
 	GPIO85_CIF_LV,
-	MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
 
 	/* Bluetooth */
 	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
@@ -582,9 +581,7 @@ static struct wm97xx_pdata mioa701_wm97xx_pdata = {
  * Voltage regulation
  */
 static struct regulator_consumer_supply max1586_consumers[] = {
-	{
-		.supply = "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data max1586_v3_info = {
@@ -706,7 +703,6 @@ static struct gpio global_gpios[] = {
 	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
 	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
 	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
-	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 };
 
 static void __init mioa701_machine_init(void)
diff --git a/trunk/arch/arm/mach-pxa/palm27x.c b/trunk/arch/arm/mach-pxa/palm27x.c
index fbc10d7b95d1..dad71cfa34c8 100644
--- a/trunk/arch/arm/mach-pxa/palm27x.c
+++ b/trunk/arch/arm/mach-pxa/palm27x.c
@@ -429,9 +429,7 @@ void __init palm27x_power_init(int ac, int usb)
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data palm27x_max1587a_v3_info = {
diff --git a/trunk/arch/arm/mach-pxa/pcm990-baseboard.c b/trunk/arch/arm/mach-pxa/pcm990-baseboard.c
index cb723e84bc27..abab4e2b122c 100644
--- a/trunk/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/trunk/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -65,18 +65,6 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 };
 
-static void __iomem *pcm990_cpld_base;
-
-static u8 pcm990_cpld_readb(unsigned int reg)
-{
-	return readb(pcm990_cpld_base + reg);
-}
-
-static void pcm990_cpld_writeb(u8 value, unsigned int reg)
-{
-	writeb(value, pcm990_cpld_base + reg);
-}
-
 /*
  * pcm990_lcd_power - control power supply to the LCD
  * @on: 0 = switch off, 1 = switch on
@@ -90,13 +78,13 @@ static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
 		/* enable LCD-Latches
 		 * power on LCD
 		 */
-		pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
-				PCM990_CTRL_REG3);
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
+			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
 	} else {
 		/* disable LCD-Latches
 		 * power off LCD
 		 */
-		pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
 	}
 }
 #endif
@@ -255,26 +243,15 @@ static unsigned long pcm990_irq_enabled;
 static void pcm990_mask_ack_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-
-	pcm990_irq_enabled &= ~(1 << pcm990_irq);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
+	PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
 }
 
 static void pcm990_unmask_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	u8 val;
-
 	/* the irq can be acknowledged only if deasserted, so it's done here */
-
-	pcm990_irq_enabled |= (1 << pcm990_irq);
-
-	val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	val |= 1 << pcm990_irq;
-	pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
+	PCM990_INTSETCLR |= 1 << pcm990_irq;
+	PCM990_INTMSKENA  = (pcm990_irq_enabled |= (1 << pcm990_irq));
 }
 
 static struct irq_chip pcm990_irq_chip = {
@@ -284,10 +261,7 @@ static struct irq_chip pcm990_irq_chip = {
 
 static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned long pending;
-
-	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	pending &= pcm990_irq_enabled;
+	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 
 	do {
 		/* clear our parent IRQ */
@@ -296,8 +270,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 			irq = PCM027_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
 		}
-		pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-		pending &= pcm990_irq_enabled;
+		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 	} while (pending);
 }
 
@@ -312,9 +285,8 @@ static void __init pcm990_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	/* disable all Interrupts */
-	pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
-	pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
+	PCM990_INTMSKENA = 0x00;	/* disable all Interrupts */
+	PCM990_INTSETCLR = 0xFF;
 
 	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
 	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
@@ -337,16 +309,13 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data *p_d = dev->platform_data;
-	u8 val;
-
-	val = pcm990_cpld_readb(PCM990_CTRL_REG5);
 
 	if ((1 << vdd) & p_d->ocr_mask)
-		val |= PCM990_CTRL_MMC2PWR;
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+						PCM990_CTRL_MMC2PWR;
 	else
-		val &= ~PCM990_CTRL_MMC2PWR;
-
-	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+						~PCM990_CTRL_MMC2PWR;
 }
 
 static void pcm990_mci_exit(struct device *dev, void *data)
@@ -511,6 +480,23 @@ static struct platform_device pcm990_camera[] = {
 };
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
+/*
+ * enable generic access to the base board control CPLDs U6 and U7
+ */
+static struct map_desc pcm990_io_desc[] __initdata = {
+	{
+		.virtual	= PCM990_CTRL_BASE,
+		.pfn		= __phys_to_pfn(PCM990_CTRL_PHYS),
+		.length		= PCM990_CTRL_SIZE,
+		.type		= MT_DEVICE	/* CPLD */
+	}, {
+		.virtual	= PCM990_CF_PLD_BASE,
+		.pfn		= __phys_to_pfn(PCM990_CF_PLD_PHYS),
+		.length		= PCM990_CF_PLD_SIZE,
+		.type		= MT_DEVICE	/* CPLD */
+	}
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm027 init.
  *
@@ -521,11 +507,8 @@ void __init pcm990_baseboard_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
 
-	pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
-	if (!pcm990_cpld_base) {
-		pr_err("pcm990: failed to ioremap cpld\n");
-		return;
-	}
+	/* register CPLD access */
+	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
diff --git a/trunk/arch/arm/mach-pxa/spitz.c b/trunk/arch/arm/mach-pxa/spitz.c
index df2ab0fb2ace..363d91b44ecb 100644
--- a/trunk/arch/arm/mach-pxa/spitz.c
+++ b/trunk/arch/arm/mach-pxa/spitz.c
@@ -877,9 +877,7 @@ static struct i2c_board_info spitz_i2c_devs[] = {
 };
 
 static struct regulator_consumer_supply isl6271a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data isl6271a_info[] = {
diff --git a/trunk/arch/arm/mach-pxa/stargate2.c b/trunk/arch/arm/mach-pxa/stargate2.c
index 4cd645e29b64..30b1b0b3c7f7 100644
--- a/trunk/arch/arm/mach-pxa/stargate2.c
+++ b/trunk/arch/arm/mach-pxa/stargate2.c
@@ -151,10 +151,7 @@ static struct platform_device sht15 = {
 };
 
 static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
-	{
-		.dev_name = "sht15",
-		.supply = "vcc",
-	},
+	REGULATOR_SUPPLY("vcc", "sht15"),
 };
 
 enum stargate2_ldos{
diff --git a/trunk/arch/arm/mach-pxa/vpac270.c b/trunk/arch/arm/mach-pxa/vpac270.c
index c57ab636ea9c..e1740acd15f1 100644
--- a/trunk/arch/arm/mach-pxa/vpac270.c
+++ b/trunk/arch/arm/mach-pxa/vpac270.c
@@ -640,9 +640,7 @@ static inline void vpac270_ide_init(void) {}
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data vpac270_max1587a_v3_info = {
diff --git a/trunk/arch/arm/mach-pxa/z2.c b/trunk/arch/arm/mach-pxa/z2.c
index fa8619970841..b9320cb8a11f 100644
--- a/trunk/arch/arm/mach-pxa/z2.c
+++ b/trunk/arch/arm/mach-pxa/z2.c
@@ -615,9 +615,7 @@ static inline void z2_spi_init(void) {}
 #if defined(CONFIG_REGULATOR_TPS65023) || \
 	defined(CONFIG_REGULATOR_TPS65023_MODULE)
 static struct regulator_consumer_supply z2_tps65021_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data z2_tps65021_info[] = {
diff --git a/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c b/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c
index 7dce84b61a27..e20bf5835365 100644
--- a/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -306,24 +306,6 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
-
-	REGULATOR_SUPPLY("DC1VDD", "0-0034"),
-	REGULATOR_SUPPLY("DC2VDD", "0-0034"),
-	REGULATOR_SUPPLY("DC3VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO1VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO2VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO4VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO5VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO6VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO7VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO8VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO9VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO10VDD", "0-0034"),
-	REGULATOR_SUPPLY("LDO11VDD", "0-0034"),
-
-	REGULATOR_SUPPLY("DC1VDD", "1-0034"),
-	REGULATOR_SUPPLY("DC2VDD", "1-0034"),
-	REGULATOR_SUPPLY("DC3VDD", "1-0034"),
 };
 
 static struct regulator_init_data wallvdd_data = {
diff --git a/trunk/arch/arm/mach-shmobile/Kconfig b/trunk/arch/arm/mach-shmobile/Kconfig
index 8e3602adabef..34560cab45d9 100644
--- a/trunk/arch/arm/mach-shmobile/Kconfig
+++ b/trunk/arch/arm/mach-shmobile/Kconfig
@@ -93,23 +93,11 @@ config MACH_BONITO
 	select ARCH_REQUIRE_GPIOLIB
 	depends on ARCH_R8A7740
 
-config MACH_ARMADILLO800EVA
-	bool "Armadillo-800 EVA board"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
-
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 
-config MACH_KZM9G
-	bool "KZM-A9-GT board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
-
 comment "SH-Mobile System Configuration"
 
 config CPU_HAS_INTEVT
@@ -122,8 +110,7 @@ config MEMORY_START
 	hex "Physical memory start address"
 	default "0x50000000" if MACH_G3EVM
 	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
-				MACH_MACKEREL || MACH_BONITO || \
-				MACH_ARMADILLO800EVA
+				MACH_MACKEREL || MACH_BONITO
 	default "0x41000000" if MACH_KOTA2
 	default "0x00000000"
 	---help---
@@ -135,8 +122,7 @@ config MEMORY_SIZE
 	hex "Physical memory size"
 	default "0x08000000" if MACH_G3EVM
 	default "0x08000000" if MACH_G4EVM
-	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
-				MACH_ARMADILLO800EVA
+	default "0x20000000" if MACH_AG5EVM || MACH_BONITO
 	default "0x1e000000" if MACH_KOTA2
 	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
 	default "0x04000000"
diff --git a/trunk/arch/arm/mach-shmobile/Makefile b/trunk/arch/arm/mach-shmobile/Makefile
index 4ac8c12c72ba..e7c2590b75d9 100644
--- a/trunk/arch/arm/mach-shmobile/Makefile
+++ b/trunk/arch/arm/mach-shmobile/Makefile
@@ -49,8 +49,6 @@ obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/trunk/arch/arm/mach-shmobile/board-ap4evb.c b/trunk/arch/arm/mach-shmobile/board-ap4evb.c
index 0c3caeba2f3e..b56dde2732bb 100644
--- a/trunk/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/trunk/arch/arm/mach-shmobile/board-ap4evb.c
@@ -997,8 +997,6 @@ static struct sh_mobile_ceu_companion csi2 = {
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-	.max_width = 8188,
-	.max_height = 8188,
 	.csi2 = &csi2,
 };
 
diff --git a/trunk/arch/arm/mach-shmobile/board-armadillo800eva.c b/trunk/arch/arm/mach-shmobile/board-armadillo800eva.c
deleted file mode 100644
index 9e37026ef9dd..000000000000
--- a/trunk/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ /dev/null
@@ -1,784 +0,0 @@
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/input.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/sh_eth.h>
-#include <linux/videodev2.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/r8a7740.h>
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * CON1		Camera Module
- * CON2		Extension Bus
- * CON3		HDMI Output
- * CON4		Composite Video Output
- * CON5		H-UDI JTAG
- * CON6		ARM JTAG
- * CON7		SD1
- * CON8		SD2
- * CON9		RTC BackUp
- * CON10	Monaural Mic Input
- * CON11	Stereo Headphone Output
- * CON12	Audio Line Output(L)
- * CON13	Audio Line Output(R)
- * CON14	AWL13 Module
- * CON15	Extension
- * CON16	LCD1
- * CON17	LCD2
- * CON19	Power Input
- * CON20	USB1
- * CON21	USB2
- * CON22	Serial
- * CON23	LAN
- * CON24	USB3
- * LED1		Camera LED(Yellow)
- * LED2		Power LED (Green)
- * ED3-LED6	User LED(Yellow)
- * LED7		LAN link LED(Green)
- * LED8		LAN activity LED(Yellow)
- */
-
-/*
- * DipSwitch
- *
- *                    SW1
- *
- * -12345678-+---------------+----------------------------
- *  1        | boot          | hermit
- *  0        | boot          | OS auto boot
- * -12345678-+---------------+----------------------------
- *   00      | boot device   | eMMC
- *   10      | boot device   | SDHI0 (CON7)
- *   01      | boot device   | -
- *   11      | boot device   | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- *     0     | Extension Bus | D8-D15 disable, eMMC enable
- *     1     | Extension Bus | D8-D15 enable,  eMMC disable
- * -12345678-+---------------+----------------------------
- *      0    | SDHI1         | COM8 disable, COM14 enable
- *      1    | SDHI1         | COM8 enable,  COM14 disable
- * -12345678-+---------------+----------------------------
- *       0   | USB0          | COM20 enable,  COM24 disable
- *       1   | USB0          | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- *        00 | JTAG          | SH-X2
- *        10 | JTAG          | ARM
- *        01 | JTAG          | -
- *        11 | JTAG          | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- *	usbhsf_power_ctrl()
- *
- * CAUTION
- *
- * It uses autonomy mode for USB hotplug at this point
- * (= usbhs_private.platform_callback.get_vbus is NULL),
- * since we don't know what's happen on PM control
- * on this workaround.
- */
-#define USBCR1		0xe605810a
-#define USBH		0xC6700000
-#define USBH_USBCTR	0x10834
-
-struct usbhsf_private {
-	struct clk *phy;
-	struct clk *usb24;
-	struct clk *pci;
-	struct clk *func;
-	struct clk *host;
-	void __iomem *usbh_base;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define usbhsf_get_priv(pdev)				\
-	container_of(renesas_usbhs_get_info(pdev),	\
-		     struct usbhsf_private, info)
-
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static void usbhsf_power_ctrl(struct platform_device *pdev,
-			      void __iomem *base, int enable)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	/*
-	 * Work around for USB Function.
-	 * It needs USB host clock, and settings
-	 */
-	if (enable) {
-		/*
-		 * enable all the related usb clocks
-		 * for usb workaround
-		 */
-		clk_enable(priv->usb24);
-		clk_enable(priv->pci);
-		clk_enable(priv->host);
-		clk_enable(priv->func);
-		clk_enable(priv->phy);
-
-		/*
-		 * set USBCR1
-		 *
-		 * Port1 is driven by USB function,
-		 * Port2 is driven by USB HOST
-		 * One HOST (Port1 or Port2 is HOST)
-		 * USB PLL input clock = 24MHz
-		 */
-		__raw_writew(0xd750, USBCR1);
-		mdelay(1);
-
-		/*
-		 * start USB Host
-		 */
-		__raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
-		__raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
-		mdelay(10);
-
-		/*
-		 * USB PHY Power ON
-		 */
-		__raw_writew(0xd770, USBCR1);
-		__raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
-
-	} else {
-		__raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
-		__raw_writew(0xd7c0, USBCR1); /* GPIO */
-
-		clk_disable(priv->phy);
-		clk_disable(priv->func);	/* usb work around */
-		clk_disable(priv->host);	/* usb work around */
-		clk_disable(priv->pci);		/* usb work around */
-		clk_disable(priv->usb24);	/* usb work around */
-	}
-}
-
-static void usbhsf_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	if (!IS_ERR(priv->phy))
-		clk_put(priv->phy);
-	if (!IS_ERR(priv->usb24))
-		clk_put(priv->usb24);
-	if (!IS_ERR(priv->pci))
-		clk_put(priv->pci);
-	if (!IS_ERR(priv->host))
-		clk_put(priv->host);
-	if (!IS_ERR(priv->func))
-		clk_put(priv->func);
-	if (priv->usbh_base)
-		iounmap(priv->usbh_base);
-
-	priv->phy	= NULL;
-	priv->usb24	= NULL;
-	priv->pci	= NULL;
-	priv->host	= NULL;
-	priv->func	= NULL;
-	priv->usbh_base	= NULL;
-}
-
-static int usbhsf_hardware_init(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	priv->phy	= clk_get(&pdev->dev, "phy");
-	priv->usb24	= clk_get(&pdev->dev, "usb24");
-	priv->pci	= clk_get(&pdev->dev, "pci");
-	priv->func	= clk_get(&pdev->dev, "func");
-	priv->host	= clk_get(&pdev->dev, "host");
-	priv->usbh_base	= ioremap_nocache(USBH, 0x20000);
-
-	if (IS_ERR(priv->phy)		||
-	    IS_ERR(priv->usb24)		||
-	    IS_ERR(priv->pci)		||
-	    IS_ERR(priv->host)		||
-	    IS_ERR(priv->func)		||
-	    !priv->usbh_base) {
-		dev_err(&pdev->dev, "USB clock setting failed\n");
-		usbhsf_hardware_exit(pdev);
-		return -EIO;
-	}
-
-	/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
-	clk_set_rate(priv->usb24,
-		     clk_get_rate(clk_get_parent(priv->usb24)));
-
-	return 0;
-}
-
-static struct usbhsf_private usbhsf_private = {
-	.info = {
-		.platform_callback = {
-			.get_id		= usbhsf_get_id,
-			.hardware_init	= usbhsf_hardware_init,
-			.hardware_exit	= usbhsf_hardware_exit,
-			.power_ctrl	= usbhsf_power_ctrl,
-		},
-		.driver_param = {
-			.buswait_bwait		= 5,
-			.detection_delay	= 5,
-		},
-	}
-};
-
-static struct resource usbhsf_resources[] = {
-	{
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe6890104 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= evt2irq(0x0A20),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhsf_device = {
-	.name	= "renesas_usbhs",
-	.dev = {
-		.platform_data = &usbhsf_private.info,
-	},
-	.id = -1,
-	.num_resources	= ARRAY_SIZE(usbhsf_resources),
-	.resource	= usbhsf_resources,
-};
-
-/* Ether */
-static struct sh_eth_plat_data sh_eth_platdata = {
-	.phy			= 0x00, /* LAN8710A */
-	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.register_type		= SH_ETH_REG_GIGABIT,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sh_eth_resources[] = {
-	{
-		.start	= 0xe9a00000,
-		.end	= 0xe9a00800 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 0xe9a01800,
-		.end	= 0xe9a02000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= evt2irq(0x0500),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_eth_device = {
-	.name = "sh-eth",
-	.id = -1,
-	.dev = {
-		.platform_data = &sh_eth_platdata,
-	},
-	.resource = sh_eth_resources,
-	.num_resources = ARRAY_SIZE(sh_eth_resources),
-};
-
-/* LCDC */
-static struct fb_videomode lcdc0_mode = {
-	.name		= "AMPIER/AM-800480",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.lcd_modes	= &lcdc0_mode,
-		.num_modes	= 1,
-		.panel_cfg = {
-			.width	= 111,
-			.height = 68,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCD0",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
-	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
-	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
-	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31	evt2irq(0x33E0)
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\
-			  MMC_CAP_NEEDS_POLL,
-	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] = {
-	{
-		.name	= "SDHI0",
-		.start	= 0xe6850000,
-		.end	= 0xe6850100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
-	 */
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= evt2irq(0x0E20),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= evt2irq(0x0E40),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sdhi0_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
-	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xe6860000,
-		.end	= 0xe6860100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0E80),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0EA0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0EC0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-/* MMCIF */
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NONREMOVABLE,
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd0100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= evt2irq(0x1AC0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= evt2irq(0x1AE0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = evt2irq(0x0340),
-	},
-};
-
-/*
- * board devices
- */
-static struct platform_device *eva_devices[] __initdata = {
-	&lcdc0_device,
-	&gpio_keys_device,
-	&sh_eth_device,
-	&sdhi0_device,
-	&sh_mmcif_device,
-};
-
-static void __init eva_clock_init(void)
-{
-	struct clk *system	= clk_get(NULL, "system_clk");
-	struct clk *xtal1	= clk_get(NULL, "extal1");
-	struct clk *usb24s	= clk_get(NULL, "usb24s");
-
-	if (IS_ERR(system)	||
-	    IS_ERR(xtal1)	||
-	    IS_ERR(usb24s)) {
-		pr_err("armadillo800eva board clock init failed\n");
-		goto clock_error;
-	}
-
-	/* armadillo 800 eva extal1 is 24MHz */
-	clk_set_rate(xtal1, 24000000);
-
-	/* usb24s use extal1 (= system) clock (= 24MHz) */
-	clk_set_parent(usb24s, system);
-
-clock_error:
-	if (!IS_ERR(system))
-		clk_put(system);
-	if (!IS_ERR(xtal1))
-		clk_put(xtal1);
-	if (!IS_ERR(usb24s))
-		clk_put(usb24s);
-}
-
-/*
- * board init
- */
-static void __init eva_init(void)
-{
-	eva_clock_init();
-
-	r8a7740_pinmux_init();
-
-	/* SCIFA1 */
-	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
-	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
-
-	/* LCDC0 */
-	gpio_request(GPIO_FN_LCDC0_SELECT,	NULL);
-	gpio_request(GPIO_FN_LCD0_D0,		NULL);
-	gpio_request(GPIO_FN_LCD0_D1,		NULL);
-	gpio_request(GPIO_FN_LCD0_D2,		NULL);
-	gpio_request(GPIO_FN_LCD0_D3,		NULL);
-	gpio_request(GPIO_FN_LCD0_D4,		NULL);
-	gpio_request(GPIO_FN_LCD0_D5,		NULL);
-	gpio_request(GPIO_FN_LCD0_D6,		NULL);
-	gpio_request(GPIO_FN_LCD0_D7,		NULL);
-	gpio_request(GPIO_FN_LCD0_D8,		NULL);
-	gpio_request(GPIO_FN_LCD0_D9,		NULL);
-	gpio_request(GPIO_FN_LCD0_D10,		NULL);
-	gpio_request(GPIO_FN_LCD0_D11,		NULL);
-	gpio_request(GPIO_FN_LCD0_D12,		NULL);
-	gpio_request(GPIO_FN_LCD0_D13,		NULL);
-	gpio_request(GPIO_FN_LCD0_D14,		NULL);
-	gpio_request(GPIO_FN_LCD0_D15,		NULL);
-	gpio_request(GPIO_FN_LCD0_D16,		NULL);
-	gpio_request(GPIO_FN_LCD0_D17,		NULL);
-	gpio_request(GPIO_FN_LCD0_D18_PORT40,	NULL);
-	gpio_request(GPIO_FN_LCD0_D19_PORT4,	NULL);
-	gpio_request(GPIO_FN_LCD0_D20_PORT3,	NULL);
-	gpio_request(GPIO_FN_LCD0_D21_PORT2,	NULL);
-	gpio_request(GPIO_FN_LCD0_D22_PORT0,	NULL);
-	gpio_request(GPIO_FN_LCD0_D23_PORT1,	NULL);
-	gpio_request(GPIO_FN_LCD0_DCK,		NULL);
-	gpio_request(GPIO_FN_LCD0_VSYN,		NULL);
-	gpio_request(GPIO_FN_LCD0_HSYN,		NULL);
-	gpio_request(GPIO_FN_LCD0_DISP,		NULL);
-	gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
-
-	gpio_request(GPIO_PORT61, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT61, 1);
-
-	gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
-	gpio_direction_output(GPIO_PORT202, 0);
-
-	/* Touchscreen */
-	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
-	gpio_request(GPIO_PORT166,	NULL); /* TP_RST_B */
-	gpio_direction_output(GPIO_PORT166, 1);
-
-	/* GETHER */
-	gpio_request(GPIO_FN_ET_CRS,		NULL);
-	gpio_request(GPIO_FN_ET_MDC,		NULL);
-	gpio_request(GPIO_FN_ET_MDIO,		NULL);
-	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
-	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
-	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
-	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
-	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
-	gpio_request(GPIO_FN_ET_COL,		NULL);
-	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
-	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
-
-	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
-	gpio_direction_output(GPIO_PORT18, 1);
-
-	/* USB */
-	gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
-	gpio_direction_input(GPIO_PORT159);
-
-	if (gpio_get_value(GPIO_PORT159)) {
-		/* USB Host */
-	} else {
-		/* USB Func */
-		gpio_request(GPIO_FN_VBUS, NULL);
-		platform_device_register(&usbhsf_device);
-	}
-
-	/* SDHI0 */
-	gpio_request(GPIO_FN_SDHI0_CMD, NULL);
-	gpio_request(GPIO_FN_SDHI0_CLK, NULL);
-	gpio_request(GPIO_FN_SDHI0_D0, NULL);
-	gpio_request(GPIO_FN_SDHI0_D1, NULL);
-	gpio_request(GPIO_FN_SDHI0_D2, NULL);
-	gpio_request(GPIO_FN_SDHI0_D3, NULL);
-	gpio_request(GPIO_FN_SDHI0_WP, NULL);
-
-	gpio_request(GPIO_PORT17, NULL);	/* SDHI0_18/33_B */
-	gpio_request(GPIO_PORT74, NULL);	/* SDHI0_PON */
-	gpio_request(GPIO_PORT75, NULL);	/* SDSLOT1_PON */
-	gpio_direction_output(GPIO_PORT17, 0);
-	gpio_direction_output(GPIO_PORT74, 1);
-	gpio_direction_output(GPIO_PORT75, 1);
-
-	/* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
-
-	/*
-	 * MMCIF
-	 *
-	 * Here doesn't care SW1.4 status,
-	 * since CON2 is not mounted.
-	 */
-	gpio_request(GPIO_FN_MMC1_CLK_PORT103,	NULL);
-	gpio_request(GPIO_FN_MMC1_CMD_PORT104,	NULL);
-	gpio_request(GPIO_FN_MMC1_D0_PORT149,	NULL);
-	gpio_request(GPIO_FN_MMC1_D1_PORT148,	NULL);
-	gpio_request(GPIO_FN_MMC1_D2_PORT147,	NULL);
-	gpio_request(GPIO_FN_MMC1_D3_PORT146,	NULL);
-	gpio_request(GPIO_FN_MMC1_D4_PORT145,	NULL);
-	gpio_request(GPIO_FN_MMC1_D5_PORT144,	NULL);
-	gpio_request(GPIO_FN_MMC1_D6_PORT143,	NULL);
-	gpio_request(GPIO_FN_MMC1_D7_PORT142,	NULL);
-
-	/*
-	 * CAUTION
-	 *
-	 * DBGMD/LCDC0/FSIA MUX
-	 * DBGMD_SELECT_B should be set after setting PFC Function.
-	 */
-	gpio_request(GPIO_PORT176, NULL);
-	gpio_direction_output(GPIO_PORT176, 1);
-
-	/*
-	 * We can switch CON8/CON14 by SW1.5,
-	 * but it needs after DBGMD_SELECT_B
-	 */
-	gpio_request(GPIO_PORT6, NULL);
-	gpio_direction_input(GPIO_PORT6);
-	if (gpio_get_value(GPIO_PORT6)) {
-		/* CON14 enable */
-	} else {
-		/* CON8 (SDHI1) enable */
-		gpio_request(GPIO_FN_SDHI1_CLK,	NULL);
-		gpio_request(GPIO_FN_SDHI1_CMD,	NULL);
-		gpio_request(GPIO_FN_SDHI1_D0,	NULL);
-		gpio_request(GPIO_FN_SDHI1_D1,	NULL);
-		gpio_request(GPIO_FN_SDHI1_D2,	NULL);
-		gpio_request(GPIO_FN_SDHI1_D3,	NULL);
-		gpio_request(GPIO_FN_SDHI1_CD,	NULL);
-		gpio_request(GPIO_FN_SDHI1_WP,	NULL);
-
-		gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
-		gpio_direction_output(GPIO_PORT16, 1);
-
-		platform_device_register(&sdhi1_device);
-	}
-
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-
-	r8a7740_add_standard_devices();
-
-	platform_add_devices(eva_devices,
-			     ARRAY_SIZE(eva_devices));
-}
-
-static void __init eva_earlytimer_init(void)
-{
-	r8a7740_clock_init(MD_CK0 | MD_CK2);
-	shmobile_earlytimer_init();
-}
-
-static void __init eva_add_early_devices(void)
-{
-	r8a7740_add_early_devices();
-
-	/* override timer setup with board-specific code */
-	shmobile_timer.init = eva_earlytimer_init;
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
-	"renesas,armadillo800eva",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
-	.map_io		= r8a7740_map_io,
-	.init_early	= eva_add_early_devices,
-	.init_irq	= r8a7740_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= eva_init,
-	.timer		= &shmobile_timer,
-	.dt_compat	= eva_boards_compat_dt,
-MACHINE_END
diff --git a/trunk/arch/arm/mach-shmobile/board-bonito.c b/trunk/arch/arm/mach-shmobile/board-bonito.c
index 63ab7062bee3..81fd95f7f52a 100644
--- a/trunk/arch/arm/mach-shmobile/board-bonito.c
+++ b/trunk/arch/arm/mach-shmobile/board-bonito.c
@@ -486,7 +486,7 @@ static void __init bonito_earlytimer_init(void)
 	shmobile_earlytimer_init();
 }
 
-static void __init bonito_add_early_devices(void)
+void __init bonito_add_early_devices(void)
 {
 	r8a7740_add_early_devices();
 
diff --git a/trunk/arch/arm/mach-shmobile/board-kzm9g.c b/trunk/arch/arm/mach-shmobile/board-kzm9g.c
deleted file mode 100644
index d8e33b682832..000000000000
--- a/trunk/arch/arm/mach-shmobile/board-kzm9g.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * KZM-A9-GT board support
- *
- * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/input.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/tmio.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/videodev2.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * external GPIO
- */
-#define GPIO_PCF8575_BASE	(GPIO_NR)
-#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
-
-/* SMSC 9221 */
-static struct resource smsc9221_resources[] = {
-	[0] = {
-		.start	= 0x10000000, /* CS4 */
-		.end	= 0x100000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x260), /* IRQ3 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9221_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc9221_platdata,
-	},
-	.resource	= smsc9221_resources,
-	.num_resources	= ARRAY_SIZE(smsc9221_resources),
-};
-
-/* USB external chip */
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip	= 0,
-	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.start	= 0x10010000,
-		.end	= 0x1001ffff - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x220), /* IRQ1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name	= "r8a66597_hcd",
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_resources),
-	.resource	= usb_resources,
-};
-
-/* LCDC */
-static struct fb_videomode kzm_lcdc_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 70,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.clock_source = LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.lcd_modes	= &kzm_lcdc_mode,
-		.num_modes	= 1,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.panel_cfg = {
-			.width	= 152,
-			.height	= 91,
-		},
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
-	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
-	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
-	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
-	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
-	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
-	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
-	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-	.poll_interval	= 250, /* poling at this point */
-};
-
-static struct platform_device gpio_keys_device = {
-	/* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
-	.name	= "gpio-keys-polled",
-	.dev	= {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* I2C */
-static struct pcf857x_platform_data pcf8575_pdata = {
-	.gpio_base	= GPIO_PCF8575_BASE,
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = intcs_evt2irq(0x300), /* IRQ8 */
-	},
-};
-
-static struct i2c_board_info i2c3_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x20),
-		.platform_data = &pcf8575_pdata,
-	},
-};
-
-static struct platform_device *kzm_devices[] __initdata = {
-	&smsc_device,
-	&usb_host_device,
-	&lcdc_device,
-	&mmc_device,
-	&sdhi0_device,
-	&gpio_keys_device,
-};
-
-/*
- * FIXME
- *
- * This is quick hack for enabling LCDC backlight
- */
-static int __init as3711_enable_lcdc_backlight(void)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	int i, ret;
-	__u8 magic[] = {
-		0x40, 0x2a,
-		0x43, 0x3c,
-		0x44, 0x3c,
-		0x45, 0x3c,
-		0x54, 0x03,
-		0x51, 0x00,
-		0x51, 0x01,
-		0xff, 0x00, /* wait */
-		0x43, 0xf0,
-		0x44, 0xf0,
-		0x45, 0xf0,
-	};
-
-	if (!machine_is_kzm9g())
-		return 0;
-
-	if (!a)
-		return 0;
-
-	msg.addr	= 0x40;
-	msg.len		= 2;
-	msg.flags	= 0;
-
-	for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
-		msg.buf = magic + i;
-
-		if (0xff == msg.buf[0]) {
-			udelay(500);
-			continue;
-		}
-
-		ret = i2c_transfer(a, &msg, 1);
-		if (ret < 0) {
-			pr_err("i2c transfer fail\n");
-			break;
-		}
-	}
-
-	return 0;
-}
-device_initcall(as3711_enable_lcdc_backlight);
-
-static void __init kzm_init(void)
-{
-	sh73a0_pinmux_init();
-
-	/* enable SCIFA4 */
-	gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
-	gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
-	gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
-
-	/* CS4 for SMSC/USB */
-	gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
-
-	/* SMSC */
-	gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
-	gpio_direction_input(GPIO_PORT224);
-
-	/* LCDC */
-	gpio_request(GPIO_FN_LCDD23,	NULL);
-	gpio_request(GPIO_FN_LCDD22,	NULL);
-	gpio_request(GPIO_FN_LCDD21,	NULL);
-	gpio_request(GPIO_FN_LCDD20,	NULL);
-	gpio_request(GPIO_FN_LCDD19,	NULL);
-	gpio_request(GPIO_FN_LCDD18,	NULL);
-	gpio_request(GPIO_FN_LCDD17,	NULL);
-	gpio_request(GPIO_FN_LCDD16,	NULL);
-	gpio_request(GPIO_FN_LCDD15,	NULL);
-	gpio_request(GPIO_FN_LCDD14,	NULL);
-	gpio_request(GPIO_FN_LCDD13,	NULL);
-	gpio_request(GPIO_FN_LCDD12,	NULL);
-	gpio_request(GPIO_FN_LCDD11,	NULL);
-	gpio_request(GPIO_FN_LCDD10,	NULL);
-	gpio_request(GPIO_FN_LCDD9,	NULL);
-	gpio_request(GPIO_FN_LCDD8,	NULL);
-	gpio_request(GPIO_FN_LCDD7,	NULL);
-	gpio_request(GPIO_FN_LCDD6,	NULL);
-	gpio_request(GPIO_FN_LCDD5,	NULL);
-	gpio_request(GPIO_FN_LCDD4,	NULL);
-	gpio_request(GPIO_FN_LCDD3,	NULL);
-	gpio_request(GPIO_FN_LCDD2,	NULL);
-	gpio_request(GPIO_FN_LCDD1,	NULL);
-	gpio_request(GPIO_FN_LCDD0,	NULL);
-	gpio_request(GPIO_FN_LCDDISP,	NULL);
-	gpio_request(GPIO_FN_LCDDCK,	NULL);
-
-	gpio_request(GPIO_PORT222,	NULL); /* LCDCDON */
-	gpio_request(GPIO_PORT226,	NULL); /* SC */
-	gpio_direction_output(GPIO_PORT222, 1);
-	gpio_direction_output(GPIO_PORT226, 1);
-
-	/* Touchscreen */
-	gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
-	gpio_direction_input(GPIO_PORT223);
-
-	/* enable MMCIF */
-	gpio_request(GPIO_FN_MMCCLK0,		NULL);
-	gpio_request(GPIO_FN_MMCCMD0_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_0_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_1_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_2_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_3_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_4_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_5_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_6_PU,	NULL);
-	gpio_request(GPIO_FN_MMCD0_7_PU,	NULL);
-
-	/* enable SD */
-	gpio_request(GPIO_FN_SDHIWP0,		NULL);
-	gpio_request(GPIO_FN_SDHICD0,		NULL);
-	gpio_request(GPIO_FN_SDHICMD0,		NULL);
-	gpio_request(GPIO_FN_SDHICLK0,		NULL);
-	gpio_request(GPIO_FN_SDHID0_3,		NULL);
-	gpio_request(GPIO_FN_SDHID0_2,		NULL);
-	gpio_request(GPIO_FN_SDHID0_1,		NULL);
-	gpio_request(GPIO_FN_SDHID0_0,		NULL);
-	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
-	gpio_request(GPIO_PORT15, NULL);
-	gpio_direction_output(GPIO_PORT15, 1); /* power */
-
-	/* I2C 3 */
-	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
-	gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
-#endif
-
-	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
-	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
-
-	sh73a0_add_standard_devices();
-	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
-	"renesas,kzm9g",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g")
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= kzm_init,
-	.timer		= &shmobile_timer,
-	.dt_compat	= kzm9g_boards_compat_dt,
-MACHINE_END
diff --git a/trunk/arch/arm/mach-shmobile/board-mackerel.c b/trunk/arch/arm/mach-shmobile/board-mackerel.c
index aae2e24fde46..8c6202bb6aeb 100644
--- a/trunk/arch/arm/mach-shmobile/board-mackerel.c
+++ b/trunk/arch/arm/mach-shmobile/board-mackerel.c
@@ -908,8 +908,6 @@ static int fsi_b_set_rate(struct device *dev, int rate, int enable)
 static struct sh_fsi_platform_info fsi_info = {
 	.port_a = {
 		.flags = SH_FSI_BRS_INV,
-		.tx_id = SHDMA_SLAVE_FSIA_TX,
-		.rx_id = SHDMA_SLAVE_FSIA_RX,
 	},
 	.port_b = {
 		.flags = SH_FSI_BRS_INV	|
@@ -922,11 +920,9 @@ static struct sh_fsi_platform_info fsi_info = {
 
 static struct resource fsi_resources[] = {
 	[0] = {
-		/* we need 0xFE1F0000 to access DMA
-		 * instead of 0xFE3C0000 */
 		.name	= "FSI",
-		.start  = 0xFE1F0000,
-		.end    = 0xFE1F0400 - 1,
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C0400 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1252,8 +1248,6 @@ static void mackerel_camera_del(struct soc_camera_device *icd)
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-	.max_width = 8188,
-	.max_height = 8188,
 };
 
 static struct resource ceu_resources[] = {
diff --git a/trunk/arch/arm/mach-shmobile/clock-r8a7740.c b/trunk/arch/arm/mach-shmobile/clock-r8a7740.c
index 26eea5f21054..99c4d743a99c 100644
--- a/trunk/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/trunk/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -47,7 +47,6 @@
 #define PLLC01CR	0xe6150028
 
 #define SUBCKCR		0xe6150080
-#define USBCKCR		0xe615008c
 
 #define MSTPSR0		0xe6150030
 #define MSTPSR1		0xe6150038
@@ -182,95 +181,6 @@ static struct clk pllc1_div2_clk = {
 	.parent		= &pllc1_clk,
 };
 
-/* USB clock */
-static struct clk *usb24s_parents[] = {
-	[0] = &system_clk,
-	[1] = &extal2_clk
-};
-
-static int usb24s_enable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR);
-
-	return 0;
-}
-
-static void usb24s_disable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) | (1 << 8), USBCKCR);
-}
-
-static int usb24s_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, ret;
-	u32 val;
-
-	if (!clk->parent_table || !clk->parent_num)
-		return -EINVAL;
-
-	/* Search the parent */
-	for (i = 0; i < clk->parent_num; i++)
-		if (clk->parent_table[i] == parent)
-			break;
-
-	if (i == clk->parent_num)
-		return -ENODEV;
-
-	ret = clk_reparent(clk, parent);
-	if (ret < 0)
-		return ret;
-
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 7);
-	val |= i << 7;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24s_clk_ops = {
-	.recalc		= followparent_recalc,
-	.enable		= usb24s_enable,
-	.disable	= usb24s_disable,
-	.set_parent	= usb24s_set_parent,
-};
-
-static struct clk usb24s_clk = {
-	.ops		= &usb24s_clk_ops,
-	.parent_table	= usb24s_parents,
-	.parent_num	= ARRAY_SIZE(usb24s_parents),
-	.parent		= &system_clk,
-};
-
-static unsigned long usb24_recalc(struct clk *clk)
-{
-	return clk->parent->rate /
-		((__raw_readl(USBCKCR) & (1 << 6)) ? 1 : 2);
-};
-
-static int usb24_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val;
-
-	/* closer to which ? parent->rate or parent->rate/2 */
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 6);
-	val |= (rate > (clk->parent->rate / 4) * 3) << 6;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24_clk_ops = {
-	.recalc		= usb24_recalc,
-	.set_rate	= usb24_set_rate,
-};
-
-static struct clk usb24_clk = {
-	.ops		= &usb24_clk_ops,
-	.parent		= &usb24s_clk,
-};
-
 struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -286,8 +196,6 @@ struct clk *main_clks[] = {
 	&pllc0_clk,
 	&pllc1_clk,
 	&pllc1_div2_clk,
-	&usb24s_clk,
-	&usb24_clk,
 };
 
 static void div4_kick(struct clk *clk)
@@ -315,7 +223,7 @@ static struct clk_div4_table div4_table = {
 
 enum {
 	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
+	DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
 	DIV4_NR
 };
 
@@ -326,7 +234,6 @@ struct clk div4_clks[DIV4_NR] = {
 	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
 	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
-	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
 	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
 	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
 	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
@@ -350,11 +257,7 @@ enum {
 	MSTP222,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 
-	MSTP329, MSTP328, MSTP323, MSTP320,
-	MSTP314, MSTP313, MSTP312,
-	MSTP309,
-
-	MSTP416, MSTP415, MSTP407, MSTP406,
+	MSTP329, MSTP323,
 
 	MSTP_NR
 };
@@ -377,18 +280,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  0, 0), /* SCIFA4 */
 
 	[MSTP329] = SH_CLK_MSTP32(&r_clk,		SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 28, 0), /* FSI */
 	[MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 20, 0), /* USBF */
-	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
-	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
-
-	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
-	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
-	[MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  7, 0), /* USB-Func */
-	[MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  6, 0), /* USB Phy */
 };
 
 static struct clk_lookup lookups[] = {
@@ -407,7 +299,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pllc0_clk",		&pllc0_clk),
 	CLKDEV_CON_ID("pllc1_clk",		&pllc1_clk),
 	CLKDEV_CON_ID("pllc1_div2_clk",		&pllc1_div2_clk),
-	CLKDEV_CON_ID("usb24s",			&usb24s_clk),
 
 	/* DIV4 clocks */
 	CLKDEV_CON_ID("i_clk",			&div4_clks[DIV4_I]),
@@ -443,22 +334,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
 
 	CLKDEV_DEV_ID("sh_cmt.10",		&mstp_clks[MSTP329]),
-	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("sh-eth",			&mstp_clks[MSTP309]),
-
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
-
-	/* ICK */
-	CLKDEV_ICK_ID("host",	"renesas_usbhs",	&mstp_clks[MSTP416]),
-	CLKDEV_ICK_ID("func",	"renesas_usbhs",	&mstp_clks[MSTP407]),
-	CLKDEV_ICK_ID("phy",	"renesas_usbhs",	&mstp_clks[MSTP406]),
-	CLKDEV_ICK_ID("pci",	"renesas_usbhs",	&div4_clks[DIV4_USBP]),
-	CLKDEV_ICK_ID("usb24",	"renesas_usbhs",	&usb24_clk),
 };
 
 void __init r8a7740_clock_init(u8 md_ck)
diff --git a/trunk/arch/arm/mach-shmobile/include/mach/common.h b/trunk/arch/arm/mach-shmobile/include/mach/common.h
index ff5f12fd742f..c85e6ecda606 100644
--- a/trunk/arch/arm/mach-shmobile/include/mach/common.h
+++ b/trunk/arch/arm/mach-shmobile/include/mach/common.h
@@ -3,8 +3,6 @@
 
 extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
-extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
-				 unsigned int mult, unsigned int div);
 struct twd_local_timer;
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
diff --git a/trunk/arch/arm/mach-shmobile/include/mach/intc.h b/trunk/arch/arm/mach-shmobile/include/mach/intc.h
index a5603c76cfe0..8b22258c8caa 100644
--- a/trunk/arch/arm/mach-shmobile/include/mach/intc.h
+++ b/trunk/arch/arm/mach-shmobile/include/mach/intc.h
@@ -142,50 +142,6 @@ static struct intc_desc p ## _desc __initdata = {			\
 			     p ## _sense_registers, p ## _ack_registers) \
 }
 
-#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
 #define INTC_IRQ_PINS_32(p, base, vect, str)				\
 									\
 static struct resource p ## _resources[] __initdata = {			\
diff --git a/trunk/arch/arm/mach-shmobile/include/mach/irqs.h b/trunk/arch/arm/mach-shmobile/include/mach/irqs.h
index 06a5da3c3050..4e686cc201fc 100644
--- a/trunk/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/trunk/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -7,7 +7,7 @@
 #define gic_spi(nr)		((nr) + 32)
 
 /* INTCS */
-#define INTCS_VECT_BASE		0x3400
+#define INTCS_VECT_BASE		0x2200
 #define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
 #define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
 
diff --git a/trunk/arch/arm/mach-shmobile/include/mach/sh7372.h b/trunk/arch/arm/mach-shmobile/include/mach/sh7372.h
index 915d0093da08..8254ab86f6cd 100644
--- a/trunk/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/trunk/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -457,8 +457,6 @@ enum {
 	SHDMA_SLAVE_SDHI1_TX,
 	SHDMA_SLAVE_SDHI2_RX,
 	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_FSIA_RX,
-	SHDMA_SLAVE_FSIA_TX,
 	SHDMA_SLAVE_MMCIF_RX,
 	SHDMA_SLAVE_MMCIF_TX,
 	SHDMA_SLAVE_USB0_TX,
diff --git a/trunk/arch/arm/mach-shmobile/include/mach/sh73a0.h b/trunk/arch/arm/mach-shmobile/include/mach/sh73a0.h
index ac758579d4e9..cad57578ceed 100644
--- a/trunk/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/trunk/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -482,9 +482,6 @@ enum {
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
 	GPIO_FN_FSIAISLD_PU,
-
-	/* end of GPIO */
-	GPIO_NR,
 };
 
 /* DMA slave IDs */
diff --git a/trunk/arch/arm/mach-shmobile/intc-sh7372.c b/trunk/arch/arm/mach-shmobile/intc-sh7372.c
index 2587a22842f2..6447e0af52d4 100644
--- a/trunk/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/trunk/arch/arm/mach-shmobile/intc-sh7372.c
@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -306,16 +305,14 @@ static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
 			 intca_mask_registers, intca_prio_registers,
 			 NULL);
 
-INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000,
-		 INTC_VECT, "sh7372-intca-irq-lo");
-
-INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000,
-		 INTC_VECT, "sh7372-intca-irq-hi");
-
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-pins");
 enum {
 	UNUSED_INTCS = 0,
 	ENABLED_INTCS,
 
+	INTCS,
+
 	/* interrupt sources INTCS */
 
 	/* IRQ0S - IRQ31S */
@@ -429,6 +426,8 @@ static struct intc_vect intcs_vectors[] = {
 	INTCS_VECT(CPORTS2R, 0x1a20),
 	/* CEC */
 	INTCS_VECT(JPU6E, 0x1a80),
+
+	INTC_VECT(INTCS, 0xf80),
 };
 
 static struct intc_group intcs_groups[] __initdata = {
@@ -491,6 +490,9 @@ static struct intc_mask_reg intcs_mask_registers[] = {
 	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
 	  { MFIS2_INTCS, CPORTS2R, 0, 0,
 	    JPU6E, 0, 0, 0 } },
+	{ 0xffd20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } },
 };
 
 /* Priority is needed for INTCA to receive the INTCS interrupt */
@@ -555,30 +557,18 @@ static void __iomem *intcs_ffd5;
 void __init sh7372_init_irq(void)
 {
 	void __iomem *intevtsa;
-	int n;
 
 	intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE);
 	intevtsa = intcs_ffd2 + 0x100;
 	intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
 
 	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_lo_desc);
-	register_intc_controller(&intca_irq_pins_hi_desc);
+	register_intc_controller(&intca_irq_pins_desc);
 	register_intc_controller(&intcs_desc);
 
-	/* setup dummy cascade chip for INTCS */
-	n = evt2irq(0xf80);
-	irq_alloc_desc_at(n, numa_node_id());
-	irq_set_chip_and_handler_name(n, &dummy_irq_chip,
-				      handle_level_irq, "level");
-	set_irq_flags(n, IRQF_VALID); /* yuck */
-
 	/* demux using INTEVTSA */
-	irq_set_handler_data(n, (void *)intevtsa);
-	irq_set_chained_handler(n, intcs_demux);
-
-	/* unmask INTCS in INTAMASK */
-	iowrite16(0, intcs_ffd2 + 0x104);
+	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
+	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
 }
 
 static unsigned short ffd2[0x200];
diff --git a/trunk/arch/arm/mach-shmobile/pfc-r8a7740.c b/trunk/arch/arm/mach-shmobile/pfc-r8a7740.c
index 670fe1869dbc..a4fff6950b03 100644
--- a/trunk/arch/arm/mach-shmobile/pfc-r8a7740.c
+++ b/trunk/arch/arm/mach-shmobile/pfc-r8a7740.c
@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <mach/r8a7740.h>
-#include <mach/irqs.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx)					\
 	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx),		\
@@ -2528,41 +2527,6 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
-static struct pinmux_irq pinmux_irqs[] = {
-	PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0,	 PORT13_FN0),	/* IRQ0A */
-	PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0),		/* IRQ1A */
-	PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0,	 PORT12_FN0),	/* IRQ2A */
-	PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0,	 PORT14_FN0),	/* IRQ3A */
-	PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0,	 PORT172_FN0),	/* IRQ4A */
-	PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0,	 PORT1_FN0),	/* IRQ5A */
-	PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0),	/* IRQ6A */
-	PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0),	/* IRQ7A */
-	PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0),		/* IRQ8A */
-	PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0),	/* IRQ9A */
-	PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0),		/* IRQ10A */
-	PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0),		/* IRQ11A */
-	PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0,	 PORT97_FN0),	/* IRQ12A */
-	PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0,	 PORT98_FN0),	/* IRQ13A */
-	PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0,	 PORT99_FN0),	/* IRQ14A */
-	PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0,	 PORT100_FN0),	/* IRQ15A */
-	PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0,	 PORT211_FN0),	/* IRQ16A */
-	PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0),		/* IRQ17A */
-	PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0),		/* IRQ18A */
-	PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0),		/* IRQ19A */
-	PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0),		/* IRQ20A */
-	PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0),		/* IRQ21A */
-	PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0),		/* IRQ22A */
-	PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0),		/* IRQ23A */
-	PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0),		/* IRQ24A */
-	PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0),		/* IRQ25A */
-	PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0,	 PORT81_FN0),	/* IRQ26A */
-	PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0,	 PORT168_FN0),	/* IRQ27A */
-	PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0,	 PORT169_FN0),	/* IRQ28A */
-	PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0,	 PORT170_FN0),	/* IRQ29A */
-	PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0,	 PORT171_FN0),	/* IRQ30A */
-	PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0,	 PORT167_FN0),	/* IRQ31A */
-};
-
 static struct pinmux_info r8a7740_pinmux_info = {
 	.name		= "r8a7740_pfc",
 	.reserved_id	= PINMUX_RESERVED,
@@ -2590,9 +2554,6 @@ static struct pinmux_info r8a7740_pinmux_info = {
 
 	.gpio_data	= pinmux_data,
 	.gpio_data_size	= ARRAY_SIZE(pinmux_data),
-
-	.gpio_irq	= pinmux_irqs,
-	.gpio_irq_size	= ARRAY_SIZE(pinmux_irqs),
 };
 
 void r8a7740_pinmux_init(void)
diff --git a/trunk/arch/arm/mach-shmobile/pfc-sh73a0.c b/trunk/arch/arm/mach-shmobile/pfc-sh73a0.c
index 4a547b803268..e05634ce2e0d 100644
--- a/trunk/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/trunk/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -829,14 +829,14 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_1), \
+		MSEL2CR_MSEL18_0), \
 	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
 	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
 	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
 	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_1), \
+		MSEL2CR_MSEL18_0), \
 	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
 	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
 	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
diff --git a/trunk/arch/arm/mach-shmobile/platsmp.c b/trunk/arch/arm/mach-shmobile/platsmp.c
index 5a2b69cf5ba6..45fa3924c6a1 100644
--- a/trunk/arch/arm/mach-shmobile/platsmp.c
+++ b/trunk/arch/arm/mach-shmobile/platsmp.c
@@ -16,13 +16,11 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
-#include <linux/of.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
-			of_machine_is_compatible("renesas,sh73a0"))
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
 #define is_r8a7779() machine_is_marzen()
 
 static unsigned int __init shmobile_smp_get_core_count(void)
diff --git a/trunk/arch/arm/mach-shmobile/setup-r8a7740.c b/trunk/arch/arm/mach-shmobile/setup-r8a7740.c
index ec4eb49c1693..14edb5cffa7f 100644
--- a/trunk/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/trunk/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -18,7 +18,6 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
-#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -61,12 +60,6 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
 void __init r8a7740_map_io(void)
 {
 	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
-
-	/*
-	 * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
-	 * enough to allocate the frame buffer memory.
-	 */
-	init_consistent_dma_size(12 << 20);
 }
 
 /* SCIFA0 */
@@ -357,19 +350,19 @@ static void r8a7740_i2c_workaround(struct platform_device *pdev)
 	i2c_write(reg, ICSTART, i2c_read(reg, ICSTART) | 0x10);
 	i2c_read(reg, ICSTART); /* dummy read */
 
-	udelay(10);
+	mdelay(100);
 
 	i2c_write(reg, ICCR, 0x01);
+	i2c_read(reg, ICCR);
 	i2c_write(reg, ICSTART, 0x00);
-
-	udelay(10);
+	i2c_read(reg, ICSTART);
 
 	i2c_write(reg, ICCR, 0x10);
-	udelay(10);
+	mdelay(100);
 	i2c_write(reg, ICCR, 0x00);
-	udelay(10);
+	mdelay(100);
 	i2c_write(reg, ICCR, 0x10);
-	udelay(10);
+	mdelay(100);
 
 	iounmap(reg);
 }
diff --git a/trunk/arch/arm/mach-shmobile/setup-sh7372.c b/trunk/arch/arm/mach-shmobile/setup-sh7372.c
index 6a4bd582c028..2fe8f83ca124 100644
--- a/trunk/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/trunk/arch/arm/mach-shmobile/setup-sh7372.c
@@ -22,7 +22,6 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/of_platform.h>
 #include <linux/uio_driver.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -461,16 +460,6 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 		.addr		= 0xe6870030,
 		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_TX,
-		.addr		= 0xfe1f0024,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_RX,
-		.addr		= 0xfe1f0020,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb2,
 	}, {
 		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
 		.addr		= 0xe6bd0034,
@@ -1103,50 +1092,3 @@ void __init sh7372_add_early_devices(void)
 	/* override timer setup with soc-specific code */
 	shmobile_timer.init = sh7372_earlytimer_init;
 }
-
-#ifdef CONFIG_USE_OF
-
-void __init sh7372_add_early_devices_dt(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
-
-	early_platform_add_devices(sh7372_early_devices,
-				   ARRAY_SIZE(sh7372_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
-	{ }
-};
-
-void __init sh7372_add_standard_devices_dt(void)
-{
-	/* clocks are setup late during boot in the case of DT */
-	sh7372_clock_init();
-
-	platform_add_devices(sh7372_early_devices,
-			    ARRAY_SIZE(sh7372_early_devices));
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh7372_auxdata_lookup, NULL);
-}
-
-static const char *sh7372_boards_compat_dt[] __initdata = {
-	"renesas,sh7372",
-	NULL,
-};
-
-DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
-	.map_io		= sh7372_map_io,
-	.init_early	= sh7372_add_early_devices_dt,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh7372_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= sh7372_add_standard_devices_dt,
-	.timer		= &shmobile_timer,
-	.dt_compat	= sh7372_boards_compat_dt,
-MACHINE_END
-
-#endif /* CONFIG_USE_OF */
diff --git a/trunk/arch/arm/mach-shmobile/timer.c b/trunk/arch/arm/mach-shmobile/timer.c
index a68919727e24..8b79e7917a23 100644
--- a/trunk/arch/arm/mach-shmobile/timer.c
+++ b/trunk/arch/arm/mach-shmobile/timer.c
@@ -19,27 +19,9 @@
  *
  */
 #include <linux/platform_device.h>
-#include <linux/delay.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
-void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
-				 unsigned int mult, unsigned int div)
-{
-	/* calculate a worst-case loops-per-jiffy value
-	 * based on maximum cpu core mhz setting and the
-	 * __delay() implementation in arch/arm/lib/delay.S
-	 *
-	 * this will result in a longer delay than expected
-	 * when the cpu core runs on lower frequencies.
-	 */
-
-	unsigned int value = (1000000 * mult) / (HZ * div);
-
-	if (!preset_lpj)
-		preset_lpj = max_cpu_core_mhz * value;
-}
-
 static void __init shmobile_late_time_init(void)
 {
 	/*
diff --git a/trunk/arch/arm/plat-orion/gpio.c b/trunk/arch/arm/plat-orion/gpio.c
index af95af257301..10d160888133 100644
--- a/trunk/arch/arm/plat-orion/gpio.c
+++ b/trunk/arch/arm/plat-orion/gpio.c
@@ -16,7 +16,6 @@
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <linux/leds.h>
 
 /*
  * GPIO unit register offsets.
@@ -290,34 +289,12 @@ void orion_gpio_set_blink(unsigned pin, int blink)
 		return;
 
 	spin_lock_irqsave(&ochip->lock, flags);
-	__set_level(ochip, pin & 31, 0);
-	__set_blinking(ochip, pin & 31, blink);
+	__set_level(ochip, pin, 0);
+	__set_blinking(ochip, pin, blink);
 	spin_unlock_irqrestore(&ochip->lock, flags);
 }
 EXPORT_SYMBOL(orion_gpio_set_blink);
 
-#define ORION_BLINK_HALF_PERIOD 100 /* ms */
-
-int orion_gpio_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		orion_gpio_set_blink(gpio, 0);
-		gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		orion_gpio_set_blink(gpio, 1);
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(orion_gpio_led_blink_set);
-
 
 /*****************************************************************************
  * Orion GPIO IRQ
diff --git a/trunk/arch/arm/plat-orion/include/plat/gpio.h b/trunk/arch/arm/plat-orion/include/plat/gpio.h
index bec0c98ce41f..3abf30428bee 100644
--- a/trunk/arch/arm/plat-orion/include/plat/gpio.h
+++ b/trunk/arch/arm/plat-orion/include/plat/gpio.h
@@ -19,8 +19,6 @@
  */
 void orion_gpio_set_unused(unsigned pin);
 void orion_gpio_set_blink(unsigned pin, int blink);
-int orion_gpio_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off);
 
 #define GPIO_INPUT_OK		(1 << 0)
 #define GPIO_OUTPUT_OK		(1 << 1)
diff --git a/trunk/drivers/mtd/nand/orion_nand.c b/trunk/drivers/mtd/nand/orion_nand.c
index 0f50ef38b87b..1d3bfb26080c 100644
--- a/trunk/drivers/mtd/nand/orion_nand.c
+++ b/trunk/drivers/mtd/nand/orion_nand.c
@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/of.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -75,13 +74,11 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 static int __init orion_nand_probe(struct platform_device *pdev)
 {
 	struct mtd_info *mtd;
-	struct mtd_part_parser_data ppdata = {};
 	struct nand_chip *nc;
 	struct orion_nand_data *board;
 	struct resource *res;
 	void __iomem *io_base;
 	int ret = 0;
-	u32 val = 0;
 
 	nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
 	if (!nc) {
@@ -104,32 +101,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 		goto no_res;
 	}
 
-	if (pdev->dev.of_node) {
-		board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data),
-					GFP_KERNEL);
-		if (!board) {
-			printk(KERN_ERR "orion_nand: failed to allocate board structure.\n");
-			ret = -ENOMEM;
-			goto no_res;
-		}
-		if (!of_property_read_u32(pdev->dev.of_node, "cle", &val))
-			board->cle = (u8)val;
-		else
-			board->cle = 0;
-		if (!of_property_read_u32(pdev->dev.of_node, "ale", &val))
-			board->ale = (u8)val;
-		else
-			board->ale = 1;
-		if (!of_property_read_u32(pdev->dev.of_node,
-						"bank-width", &val))
-			board->width = (u8)val * 8;
-		else
-			board->width = 8;
-		if (!of_property_read_u32(pdev->dev.of_node,
-						"chip-delay", &val))
-			board->chip_delay = (u8)val;
-	} else
-		board = pdev->dev.platform_data;
+	board = pdev->dev.platform_data;
 
 	mtd->priv = nc;
 	mtd->owner = THIS_MODULE;
@@ -143,10 +115,6 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	if (board->chip_delay)
 		nc->chip_delay = board->chip_delay;
 
-	WARN(board->width > 16,
-		"%d bit bus width out of range",
-		board->width);
-
 	if (board->width == 16)
 		nc->options |= NAND_BUSWIDTH_16;
 
@@ -161,9 +129,8 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	}
 
 	mtd->name = "orion_nand";
-	ppdata.of_node = pdev->dev.of_node;
-	ret = mtd_device_parse_register(mtd, NULL, &ppdata,
-			board->parts, board->nr_parts);
+	ret = mtd_device_parse_register(mtd, NULL, NULL, board->parts,
+					board->nr_parts);
 	if (ret) {
 		nand_release(mtd);
 		goto no_dev;
@@ -194,19 +161,11 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_OF
-static struct of_device_id orion_nand_of_match_table[] = {
-	{ .compatible = "mrvl,orion-nand", },
-	{},
-};
-#endif
-
 static struct platform_driver orion_nand_driver = {
 	.remove		= __devexit_p(orion_nand_remove),
 	.driver		= {
 		.name	= "orion_nand",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(orion_nand_of_match_table),
 	},
 };
 
diff --git a/trunk/drivers/pcmcia/Kconfig b/trunk/drivers/pcmcia/Kconfig
index 8fd255f7ee40..bba3ab2066ee 100644
--- a/trunk/drivers/pcmcia/Kconfig
+++ b/trunk/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
 		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
-		    || MACH_COLIBRI320 || MACH_H4700)
+		    || MACH_COLIBRI320)
 	select PCMCIA_SA1111 if ARCH_LUBBOCK && SA1111
 	select PCMCIA_SOC_COMMON
 	help
diff --git a/trunk/drivers/pcmcia/Makefile b/trunk/drivers/pcmcia/Makefile
index 7745b512a87c..47525de6a631 100644
--- a/trunk/drivers/pcmcia/Makefile
+++ b/trunk/drivers/pcmcia/Makefile
@@ -69,7 +69,6 @@ pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
 pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
 pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
 pxa2xx-obj-$(CONFIG_MACH_COLIBRI320)		+= pxa2xx_colibri.o
-pxa2xx-obj-$(CONFIG_MACH_H4700)			+= pxa2xx_hx4700.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
 
diff --git a/trunk/drivers/pcmcia/pxa2xx_hx4700.c b/trunk/drivers/pcmcia/pxa2xx_hx4700.c
deleted file mode 100644
index 7dfef3ee5b53..000000000000
--- a/trunk/drivers/pcmcia/pxa2xx_hx4700.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hx4700.h>
-
-#include "soc_common.h"
-
-static struct gpio gpios[] = {
-	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
-	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
-};
-
-static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (ret)
-		goto out;
-
-	/*
-	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
-	 * The asic3 default IRQ type is level trigger low level detect, exactly
-	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
-	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
-	 * repeatedly because it is unable to clear the level trigger interrupt.
-	 */
-	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
-
-	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-out:
-	return ret;
-}
-
-static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(gpios, ARRAY_SIZE(gpios));
-}
-
-static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-	struct pcmcia_state *state)
-{
-	state->vs_3v = 1;
-	state->vs_Xv = 0;
-}
-
-static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-	const socket_state_t *state)
-{
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
-		break;
-	case 33:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
-		break;
-	default:
-		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
-		return -EINVAL;
-	}
-
-	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
-
-	return 0;
-}
-
-static struct pcmcia_low_level hx4700_pcmcia_ops = {
-	.owner          = THIS_MODULE,
-	.nr             = 1,
-	.hw_init        = hx4700_pcmcia_hw_init,
-	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
-	.socket_state   = hx4700_pcmcia_socket_state,
-	.configure_socket = hx4700_pcmcia_configure_socket,
-};
-
-static struct platform_device *hx4700_pcmcia_device;
-
-static int __init hx4700_pcmcia_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!machine_is_h4700())
-		return -ENODEV;
-
-	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
-		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	hx4700_pcmcia_device = pdev;
-
-	return 0;
-}
-
-static void __exit hx4700_pcmcia_exit(void)
-{
-	platform_device_unregister(hx4700_pcmcia_device);
-}
-
-module_init(hx4700_pcmcia_init);
-module_exit(hx4700_pcmcia_exit);
-
-MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
-MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
-MODULE_LICENSE("GPL");
diff --git a/trunk/include/linux/mfd/asic3.h b/trunk/include/linux/mfd/asic3.h
index ef6faa5cee46..ed793b77a1c5 100644
--- a/trunk/include/linux/mfd/asic3.h
+++ b/trunk/include/linux/mfd/asic3.h
@@ -138,7 +138,6 @@ struct asic3_platform_data {
 #define ASIC3_GPIOC13_nPWAIT		ASIC3_CONFIG_GPIO(45, 1, 1, 0)
 #define ASIC3_GPIOC14_nPIOIS16		ASIC3_CONFIG_GPIO(46, 1, 1, 0)
 #define ASIC3_GPIOC15_nPIOR		ASIC3_CONFIG_GPIO(47, 1, 0, 0)
-#define ASIC3_GPIOD4_CF_nCD		ASIC3_CONFIG_GPIO(52, 1, 0, 0)
 #define ASIC3_GPIOD11_nCIOIS16		ASIC3_CONFIG_GPIO(59, 1, 0, 0)
 #define ASIC3_GPIOD12_nCWAIT		ASIC3_CONFIG_GPIO(60, 1, 0, 0)
 #define ASIC3_GPIOD15_nPIOW		ASIC3_CONFIG_GPIO(63, 1, 0, 0)
diff --git a/trunk/include/linux/ti_wilink_st.h b/trunk/include/linux/ti_wilink_st.h
index 3ca0269dd0b5..2ef4385da6bf 100644
--- a/trunk/include/linux/ti_wilink_st.h
+++ b/trunk/include/linux/ti_wilink_st.h
@@ -25,8 +25,6 @@
 #ifndef TI_WILINK_ST_H
 #define TI_WILINK_ST_H
 
-#include <linux/skbuff.h>
-
 /**
  * enum proto-type - The protocol on WiLink chips which share a
  *	common physical interface like UART.