diff --git a/[refs] b/[refs] index e3491478ca69..32810245297c 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 077614ee1e93245a3b9a4e1213659405dbeb0ba6 +refs/heads/master: aac3d39693529ca538e37ebdb6ed5d6432a697c7 diff --git a/trunk/.gitignore b/trunk/.gitignore index 946c7ec5c922..fb2190c61af0 100644 --- a/trunk/.gitignore +++ b/trunk/.gitignore @@ -22,6 +22,7 @@ *.lst *.symtypes *.order +modules.builtin *.elf *.bin *.gz @@ -45,14 +46,8 @@ Module.symvers # # Generated include files # -include/asm -include/asm-*/asm-offsets.h include/config -include/linux/autoconf.h -include/linux/compile.h include/linux/version.h -include/linux/utsrelease.h -include/linux/bounds.h include/generated # stgit generated dirs diff --git a/trunk/Documentation/ABI/testing/sysfs-memory-page-offline b/trunk/Documentation/ABI/testing/sysfs-memory-page-offline new file mode 100644 index 000000000000..e14703f12fdf --- /dev/null +++ b/trunk/Documentation/ABI/testing/sysfs-memory-page-offline @@ -0,0 +1,44 @@ +What: /sys/devices/system/memory/soft_offline_page +Date: Sep 2009 +KernelVersion: 2.6.33 +Contact: andi@firstfloor.org +Description: + Soft-offline the memory page containing the physical address + written into this file. Input is a hex number specifying the + physical address of the page. The kernel will then attempt + to soft-offline it, by moving the contents elsewhere or + dropping it if possible. The kernel will then be placed + on the bad page list and never be reused. + + The offlining is done in kernel specific granuality. + Normally it's the base page size of the kernel, but + this might change. + + The page must be still accessible, not poisoned. The + kernel will never kill anything for this, but rather + fail the offline. Return value is the size of the + number, or a error when the offlining failed. Reading + the file is not allowed. + +What: /sys/devices/system/memory/hard_offline_page +Date: Sep 2009 +KernelVersion: 2.6.33 +Contact: andi@firstfloor.org +Description: + Hard-offline the memory page containing the physical + address written into this file. Input is a hex number + specifying the physical address of the page. The + kernel will then attempt to hard-offline the page, by + trying to drop the page or killing any owner or + triggering IO errors if needed. Note this may kill + any processes owning the page. The kernel will avoid + to access this page assuming it's poisoned by the + hardware. + + The offlining is done in kernel specific granuality. + Normally it's the base page size of the kernel, but + this might change. + + Return value is the size of the number, or a error when + the offlining failed. + Reading the file is not allowed. diff --git a/trunk/Documentation/Changes b/trunk/Documentation/Changes index 6d0f1efc5bf6..f08b313cd235 100644 --- a/trunk/Documentation/Changes +++ b/trunk/Documentation/Changes @@ -49,6 +49,8 @@ o oprofile 0.9 # oprofiled --version o udev 081 # udevinfo -V o grub 0.93 # grub --version o mcelog 0.6 +o iptables 1.4.1 # iptables -V + Kernel compilation ================== diff --git a/trunk/Documentation/DocBook/Makefile b/trunk/Documentation/DocBook/Makefile index ab8300f67182..325cfd1d6d99 100644 --- a/trunk/Documentation/DocBook/Makefile +++ b/trunk/Documentation/DocBook/Makefile @@ -8,7 +8,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ - procfs-guide.xml writing_usb_driver.xml networking.xml \ + writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ @@ -32,10 +32,10 @@ PS_METHOD = $(prefer-db2x) ### # The targets that may be used. -PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) -xmldocs: $(BOOKS) +xmldocs: $(BOOKS) xmldoclinks sgmldocs: xmldocs PS := $(patsubst %.xml, %.ps, $(BOOKS)) @@ -45,15 +45,24 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS)) pdfdocs: $(PDF) HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS))) -htmldocs: media $(HTML) +htmldocs: $(HTML) $(call build_main_index) + $(call build_images) MAN := $(patsubst %.xml, %.9, $(BOOKS)) mandocs: $(MAN) -media: - mkdir -p $(srctree)/Documentation/DocBook/media/ - cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/ +build_images = mkdir -p $(objtree)/Documentation/DocBook/media/ && \ + cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(objtree)/Documentation/DocBook/media/ + +xmldoclinks: +ifneq ($(objtree),$(srctree)) + for dep in dvb media-entities.tmpl media-indices.tmpl v4l; do \ + rm -f $(objtree)/Documentation/DocBook/$$dep \ + && ln -s $(srctree)/Documentation/DocBook/$$dep $(objtree)/Documentation/DocBook/ \ + || exit; \ + done +endif installmandocs: mandocs mkdir -p /usr/local/man/man9/ @@ -65,7 +74,7 @@ KERNELDOC = $(srctree)/scripts/kernel-doc DOCPROC = $(objtree)/scripts/basic/docproc XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl -#XMLTOFLAGS += --skip-validation +XMLTOFLAGS += --skip-validation ### # DOCPROC is used for two purposes: @@ -101,17 +110,6 @@ endif # Changes in kernel-doc force a rebuild of all documentation $(BOOKS): $(KERNELDOC) -### -# procfs guide uses a .c file as example code. -# This requires an explicit dependency -C-procfs-example = procfs_example.xml -C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) -$(obj)/procfs-guide.xml: $(C-procfs-example2) - -# List of programs to build -##oops, this is a kernel module::hostprogs-y := procfs_example -obj-m += procfs_example.o - # Tell kbuild to always build the programs always := $(hostprogs-y) @@ -238,7 +236,7 @@ clean-files := $(DOCBOOKS) \ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ $(patsubst %.xml, %.html, $(DOCBOOKS)) \ $(patsubst %.xml, %.9, $(DOCBOOKS)) \ - $(C-procfs-example) $(index) + $(index) clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man diff --git a/trunk/Documentation/DocBook/media-entities.tmpl b/trunk/Documentation/DocBook/media-entities.tmpl index bb5ab741220e..c725cb852c54 100644 --- a/trunk/Documentation/DocBook/media-entities.tmpl +++ b/trunk/Documentation/DocBook/media-entities.tmpl @@ -23,6 +23,7 @@ VIDIOC_ENUMINPUT"> VIDIOC_ENUMOUTPUT"> VIDIOC_ENUMSTD"> +VIDIOC_ENUM_DV_PRESETS"> VIDIOC_ENUM_FMT"> VIDIOC_ENUM_FRAMEINTERVALS"> VIDIOC_ENUM_FRAMESIZES"> @@ -30,6 +31,8 @@ VIDIOC_G_AUDOUT"> VIDIOC_G_CROP"> VIDIOC_G_CTRL"> +VIDIOC_G_DV_PRESET"> +VIDIOC_G_DV_TIMINGS"> VIDIOC_G_ENC_INDEX"> VIDIOC_G_EXT_CTRLS"> VIDIOC_G_FBUF"> @@ -53,6 +56,7 @@ VIDIOC_QUERYCTRL"> VIDIOC_QUERYMENU"> VIDIOC_QUERYSTD"> +VIDIOC_QUERY_DV_PRESET"> VIDIOC_REQBUFS"> VIDIOC_STREAMOFF"> VIDIOC_STREAMON"> @@ -60,6 +64,8 @@ VIDIOC_S_AUDOUT"> VIDIOC_S_CROP"> VIDIOC_S_CTRL"> +VIDIOC_S_DV_PRESET"> +VIDIOC_S_DV_TIMINGS"> VIDIOC_S_EXT_CTRLS"> VIDIOC_S_FBUF"> VIDIOC_S_FMT"> @@ -118,6 +124,7 @@ v4l2_audio"> v4l2_audioout"> +v4l2_bt_timings"> v4l2_buffer"> v4l2_capability"> v4l2_captureparm"> @@ -128,6 +135,9 @@ v4l2_dbg_chip_ident"> v4l2_dbg_match"> v4l2_dbg_register"> +v4l2_dv_enum_preset"> +v4l2_dv_preset"> +v4l2_dv_timings"> v4l2_enc_idx"> v4l2_enc_idx_entry"> v4l2_encoder_cmd"> @@ -243,6 +253,10 @@ + + + + @@ -333,6 +347,10 @@ + + + + diff --git a/trunk/Documentation/DocBook/media-indices.tmpl b/trunk/Documentation/DocBook/media-indices.tmpl index 9e30a236d74f..78d6031de001 100644 --- a/trunk/Documentation/DocBook/media-indices.tmpl +++ b/trunk/Documentation/DocBook/media-indices.tmpl @@ -36,6 +36,7 @@ enum v4l2_preemphasis struct v4l2_audio struct v4l2_audioout +struct v4l2_bt_timings struct v4l2_buffer struct v4l2_capability struct v4l2_captureparm @@ -46,6 +47,9 @@ struct v4l2_dbg_chip_ident struct v4l2_dbg_match struct v4l2_dbg_register +struct v4l2_dv_enum_preset +struct v4l2_dv_preset +struct v4l2_dv_timings struct v4l2_enc_idx struct v4l2_enc_idx_entry struct v4l2_encoder_cmd diff --git a/trunk/Documentation/DocBook/procfs-guide.tmpl b/trunk/Documentation/DocBook/procfs-guide.tmpl deleted file mode 100644 index 9eba4b7af73d..000000000000 --- a/trunk/Documentation/DocBook/procfs-guide.tmpl +++ /dev/null @@ -1,626 +0,0 @@ - - -]> - - - - Linux Kernel Procfs Guide - - - - Erik - (J.A.K.) - Mouw - -
- mouw@nl.linux.org -
- - - - - This software and documentation were written while working on the - LART computing board - (http://www.lartmaker.nl/), - which was sponsored by the Delt University of Technology projects - Mobile Multi-media Communications and Ubiquitous Communications. - - - - - - - 1.0 - May 30, 2001 - Initial revision posted to linux-kernel - - - 1.1 - June 3, 2001 - Revised after comments from linux-kernel - - - - - 2001 - Erik Mouw - - - - - - This documentation is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - - - - This documentation is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - For more details see the file COPYING in the source - distribution of Linux. - - - - - - - - - - - - - - - Preface - - - This guide describes the use of the procfs file system from - within the Linux kernel. The idea to write this guide came up on - the #kernelnewbies IRC channel (see http://www.kernelnewbies.org/), - when Jeff Garzik explained the use of procfs and forwarded me a - message Alexander Viro wrote to the linux-kernel mailing list. I - agreed to write it up nicely, so here it is. - - - - I'd like to thank Jeff Garzik - jgarzik@pobox.com and Alexander Viro - viro@parcelfarce.linux.theplanet.co.uk for their input, - Tim Waugh twaugh@redhat.com for his Selfdocbook, - and Marc Joosen marcj@historia.et.tudelft.nl for - proofreading. - - - - Erik - - - - - - - - Introduction - - - The /proc file system - (procfs) is a special file system in the linux kernel. It's a - virtual file system: it is not associated with a block device - but exists only in memory. The files in the procfs are there to - allow userland programs access to certain information from the - kernel (like process information in /proc/[0-9]+/), but also for debug - purposes (like /proc/ksyms). - - - - This guide describes the use of the procfs file system from - within the Linux kernel. It starts by introducing all relevant - functions to manage the files within the file system. After that - it shows how to communicate with userland, and some tips and - tricks will be pointed out. Finally a complete example will be - shown. - - - - Note that the files in /proc/sys are sysctl files: they - don't belong to procfs and are governed by a completely - different API described in the Kernel API book. - - - - - - - - Managing procfs entries - - - This chapter describes the functions that various kernel - components use to populate the procfs with files, symlinks, - device nodes, and directories. - - - - A minor note before we start: if you want to use any of the - procfs functions, be sure to include the correct header file! - This should be one of the first lines in your code: - - - -#include <linux/proc_fs.h> - - - - - - - Creating a regular file - - - - struct proc_dir_entry* create_proc_entry - const char* name - mode_t mode - struct proc_dir_entry* parent - - - - - This function creates a regular file with the name - name, file mode - mode in the directory - parent. To create a file in the root of - the procfs, use NULL as - parent parameter. When successful, the - function will return a pointer to the freshly created - struct proc_dir_entry; otherwise it - will return NULL. describes how to do something useful with - regular files. - - - - Note that it is specifically supported that you can pass a - path that spans multiple directories. For example - create_proc_entry("drivers/via0/info") - will create the via0 - directory if necessary, with standard - 0755 permissions. - - - - If you only want to be able to read the file, the function - create_proc_read_entry described in may be used to create and initialise - the procfs entry in one single call. - - - - - - - - Creating a symlink - - - - struct proc_dir_entry* - proc_symlink const - char* name - struct proc_dir_entry* - parent const - char* dest - - - - - This creates a symlink in the procfs directory - parent that points from - name to - dest. This translates in userland to - ln -s dest - name. - - - - - Creating a directory - - - - struct proc_dir_entry* proc_mkdir - const char* name - struct proc_dir_entry* parent - - - - - Create a directory name in the procfs - directory parent. - - - - - - - - Removing an entry - - - - void remove_proc_entry - const char* name - struct proc_dir_entry* parent - - - - - Removes the entry name in the directory - parent from the procfs. Entries are - removed by their name, not by the - struct proc_dir_entry returned by the - various create functions. Note that this function doesn't - recursively remove entries. - - - - Be sure to free the data entry from - the struct proc_dir_entry before - remove_proc_entry is called (that is: if - there was some data allocated, of - course). See for more information - on using the data entry. - - - - - - - - - Communicating with userland - - - Instead of reading (or writing) information directly from - kernel memory, procfs works with call back - functions for files: functions that are called when - a specific file is being read or written. Such functions have - to be initialised after the procfs file is created by setting - the read_proc and/or - write_proc fields in the - struct proc_dir_entry* that the - function create_proc_entry returned: - - - -struct proc_dir_entry* entry; - -entry->read_proc = read_proc_foo; -entry->write_proc = write_proc_foo; - - - - If you only want to use a the - read_proc, the function - create_proc_read_entry described in may be used to create and initialise the - procfs entry in one single call. - - - - - - Reading data - - - The read function is a call back function that allows userland - processes to read data from the kernel. The read function - should have the following format: - - - - - int read_func - char* buffer - char** start - off_t off - int count - int* peof - void* data - - - - - The read function should write its information into the - buffer, which will be exactly - PAGE_SIZE bytes long. - - - - The parameter - peof should be used to signal that the - end of the file has been reached by writing - 1 to the memory location - peof points to. - - - - The data - parameter can be used to create a single call back function for - several files, see . - - - - The rest of the parameters and the return value are described - by a comment in fs/proc/generic.c as follows: - - -
- - You have three ways to return data: - - - - - Leave *start = NULL. (This is the default.) - Put the data of the requested offset at that - offset within the buffer. Return the number (n) - of bytes there are from the beginning of the - buffer up to the last byte of data. If the - number of supplied bytes (= n - offset) is - greater than zero and you didn't signal eof - and the reader is prepared to take more data - you will be called again with the requested - offset advanced by the number of bytes - absorbed. This interface is useful for files - no larger than the buffer. - - - - - Set *start to an unsigned long value less than - the buffer address but greater than zero. - Put the data of the requested offset at the - beginning of the buffer. Return the number of - bytes of data placed there. If this number is - greater than zero and you didn't signal eof - and the reader is prepared to take more data - you will be called again with the requested - offset advanced by *start. This interface is - useful when you have a large file consisting - of a series of blocks which you want to count - and return as wholes. - (Hack by Paul.Russell@rustcorp.com.au) - - - - - Set *start to an address within the buffer. - Put the data of the requested offset at *start. - Return the number of bytes of data placed there. - If this number is greater than zero and you - didn't signal eof and the reader is prepared to - take more data you will be called again with the - requested offset advanced by the number of bytes - absorbed. - - - -
- - - shows how to use a read call back - function. - - - - - - - - Writing data - - - The write call back function allows a userland process to write - data to the kernel, so it has some kind of control over the - kernel. The write function should have the following format: - - - - - int write_func - struct file* file - const char* buffer - unsigned long count - void* data - - - - - The write function should read count - bytes at maximum from the buffer. Note - that the buffer doesn't live in the - kernel's memory space, so it should first be copied to kernel - space with copy_from_user. The - file parameter is usually - ignored. shows how to use the - data parameter. - - - - Again, shows how to use this call back - function. - - - - - - - - A single call back for many files - - - When a large number of almost identical files is used, it's - quite inconvenient to use a separate call back function for - each file. A better approach is to have a single call back - function that distinguishes between the files by using the - data field in struct - proc_dir_entry. First of all, the - data field has to be initialised: - - - -struct proc_dir_entry* entry; -struct my_file_data *file_data; - -file_data = kmalloc(sizeof(struct my_file_data), GFP_KERNEL); -entry->data = file_data; - - - - The data field is a void - *, so it can be initialised with anything. - - - - Now that the data field is set, the - read_proc and - write_proc can use it to distinguish - between files because they get it passed into their - data parameter: - - - -int foo_read_func(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len; - - if(data == file_data) { - /* special case for this file */ - } else { - /* normal processing */ - } - - return len; -} - - - - Be sure to free the data data field - when removing the procfs entry. - - - - - - - - - Tips and tricks - - - - - - Convenience functions - - - - struct proc_dir_entry* create_proc_read_entry - const char* name - mode_t mode - struct proc_dir_entry* parent - read_proc_t* read_proc - void* data - - - - - This function creates a regular file in exactly the same way - as create_proc_entry from does, but also allows to set the read - function read_proc in one call. This - function can set the data as well, like - explained in . - - - - - - - Modules - - - If procfs is being used from within a module, be sure to set - the owner field in the - struct proc_dir_entry to - THIS_MODULE. - - - -struct proc_dir_entry* entry; - -entry->owner = THIS_MODULE; - - - - - - - - Mode and ownership - - - Sometimes it is useful to change the mode and/or ownership of - a procfs entry. Here is an example that shows how to achieve - that: - - - -struct proc_dir_entry* entry; - -entry->mode = S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH; -entry->uid = 0; -entry->gid = 100; - - - - - - - - - - Example - - - -&procfsexample; - - - diff --git a/trunk/Documentation/DocBook/procfs_example.c b/trunk/Documentation/DocBook/procfs_example.c deleted file mode 100644 index a5b11793b1e0..000000000000 --- a/trunk/Documentation/DocBook/procfs_example.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * procfs_example.c: an example proc interface - * - * Copyright (C) 2001, Erik Mouw (mouw@nl.linux.org) - * - * This file accompanies the procfs-guide in the Linux kernel - * source. Its main use is to demonstrate the concepts and - * functions described in the guide. - * - * This software has been developed while working on the LART - * computing board (http://www.lartmaker.nl), which was sponsored - * by the Delt University of Technology projects Mobile Multi-media - * Communications and Ubiquitous Communications. - * - * This program is free software; you can redistribute - * it and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place, - * Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include - - -#define MODULE_VERS "1.0" -#define MODULE_NAME "procfs_example" - -#define FOOBAR_LEN 8 - -struct fb_data_t { - char name[FOOBAR_LEN + 1]; - char value[FOOBAR_LEN + 1]; -}; - - -static struct proc_dir_entry *example_dir, *foo_file, - *bar_file, *jiffies_file, *symlink; - - -struct fb_data_t foo_data, bar_data; - - -static int proc_read_jiffies(char *page, char **start, - off_t off, int count, - int *eof, void *data) -{ - int len; - - len = sprintf(page, "jiffies = %ld\n", - jiffies); - - return len; -} - - -static int proc_read_foobar(char *page, char **start, - off_t off, int count, - int *eof, void *data) -{ - int len; - struct fb_data_t *fb_data = (struct fb_data_t *)data; - - /* DON'T DO THAT - buffer overruns are bad */ - len = sprintf(page, "%s = '%s'\n", - fb_data->name, fb_data->value); - - return len; -} - - -static int proc_write_foobar(struct file *file, - const char *buffer, - unsigned long count, - void *data) -{ - int len; - struct fb_data_t *fb_data = (struct fb_data_t *)data; - - if(count > FOOBAR_LEN) - len = FOOBAR_LEN; - else - len = count; - - if(copy_from_user(fb_data->value, buffer, len)) - return -EFAULT; - - fb_data->value[len] = '\0'; - - return len; -} - - -static int __init init_procfs_example(void) -{ - int rv = 0; - - /* create directory */ - example_dir = proc_mkdir(MODULE_NAME, NULL); - if(example_dir == NULL) { - rv = -ENOMEM; - goto out; - } - /* create jiffies using convenience function */ - jiffies_file = create_proc_read_entry("jiffies", - 0444, example_dir, - proc_read_jiffies, - NULL); - if(jiffies_file == NULL) { - rv = -ENOMEM; - goto no_jiffies; - } - - /* create foo and bar files using same callback - * functions - */ - foo_file = create_proc_entry("foo", 0644, example_dir); - if(foo_file == NULL) { - rv = -ENOMEM; - goto no_foo; - } - - strcpy(foo_data.name, "foo"); - strcpy(foo_data.value, "foo"); - foo_file->data = &foo_data; - foo_file->read_proc = proc_read_foobar; - foo_file->write_proc = proc_write_foobar; - - bar_file = create_proc_entry("bar", 0644, example_dir); - if(bar_file == NULL) { - rv = -ENOMEM; - goto no_bar; - } - - strcpy(bar_data.name, "bar"); - strcpy(bar_data.value, "bar"); - bar_file->data = &bar_data; - bar_file->read_proc = proc_read_foobar; - bar_file->write_proc = proc_write_foobar; - - /* create symlink */ - symlink = proc_symlink("jiffies_too", example_dir, - "jiffies"); - if(symlink == NULL) { - rv = -ENOMEM; - goto no_symlink; - } - - /* everything OK */ - printk(KERN_INFO "%s %s initialised\n", - MODULE_NAME, MODULE_VERS); - return 0; - -no_symlink: - remove_proc_entry("bar", example_dir); -no_bar: - remove_proc_entry("foo", example_dir); -no_foo: - remove_proc_entry("jiffies", example_dir); -no_jiffies: - remove_proc_entry(MODULE_NAME, NULL); -out: - return rv; -} - - -static void __exit cleanup_procfs_example(void) -{ - remove_proc_entry("jiffies_too", example_dir); - remove_proc_entry("bar", example_dir); - remove_proc_entry("foo", example_dir); - remove_proc_entry("jiffies", example_dir); - remove_proc_entry(MODULE_NAME, NULL); - - printk(KERN_INFO "%s %s removed\n", - MODULE_NAME, MODULE_VERS); -} - - -module_init(init_procfs_example); -module_exit(cleanup_procfs_example); - -MODULE_AUTHOR("Erik Mouw"); -MODULE_DESCRIPTION("procfs examples"); -MODULE_LICENSE("GPL"); diff --git a/trunk/Documentation/DocBook/v4l/common.xml b/trunk/Documentation/DocBook/v4l/common.xml index b1a81d246d58..c65f0ac9b6ee 100644 --- a/trunk/Documentation/DocBook/v4l/common.xml +++ b/trunk/Documentation/DocBook/v4l/common.xml @@ -716,6 +716,41 @@ if (-1 == ioctl (fd, &VIDIOC-S-STD;, &std_id)) { } +
+ Digital Video (DV) Timings + + The video standards discussed so far has been dealing with Analog TV and the +corresponding video timings. Today there are many more different hardware interfaces +such as High Definition TV interfaces (HDMI), VGA, DVI connectors etc., that carry +video signals and there is a need to extend the API to select the video timings +for these interfaces. Since it is not possible to extend the &v4l2-std-id; due to +the limited bits available, a new set of IOCTLs is added to set/get video timings at +the input and output: + + DV Presets: Digital Video (DV) presets. These are IDs representing a +video timing at the input/output. Presets are pre-defined timings implemented +by the hardware according to video standards. A __u32 data type is used to represent +a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions +to support as many different presets as needed. + + + Custom DV Timings: This will allow applications to define more detailed +custom video timings for the interface. This includes parameters such as width, height, +polarities, frontporch, backporch etc. + + + + To enumerate and query the attributes of DV presets supported by a device, +applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset, +applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the +&VIDIOC-S-DV-PRESET; ioctl. + To set custom DV timings for the device, applications use the +&VIDIOC-S-DV-TIMINGS; ioctl and to get current custom DV timings they use the +&VIDIOC-G-DV-TIMINGS; ioctl. + Applications can make use of the and + flags to decide what ioctls are available to set the +video timings for the device. +
&sub-controls; diff --git a/trunk/Documentation/DocBook/v4l/compat.xml b/trunk/Documentation/DocBook/v4l/compat.xml index 4d1902a54d61..b9dbdf9e6d29 100644 --- a/trunk/Documentation/DocBook/v4l/compat.xml +++ b/trunk/Documentation/DocBook/v4l/compat.xml @@ -2291,8 +2291,8 @@ was renamed to v4l2_chip_ident_old New control V4L2_CID_COLORFX was added. - - + +
V4L2 in Linux 2.6.32 @@ -2322,8 +2322,16 @@ more information. Added Remote Controller chapter, describing the default Remote Controller mapping for media devices. - -
+ + +
+ V4L2 in Linux 2.6.33 + + + Added support for Digital Video timings in order to support HDTV receivers and transmitters. + + +
diff --git a/trunk/Documentation/DocBook/v4l/v4l2.xml b/trunk/Documentation/DocBook/v4l/v4l2.xml index 937b4157a5d0..060105af49e5 100644 --- a/trunk/Documentation/DocBook/v4l/v4l2.xml +++ b/trunk/Documentation/DocBook/v4l/v4l2.xml @@ -74,6 +74,17 @@ Remote Controller chapter. + + + Muralidharan + Karicheri + Documented the Digital Video timings API. + +
+ m-karicheri2@ti.com +
+ + @@ -89,7 +100,7 @@ Remote Controller chapter. 2008 2009 Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin -Rubli, Andy Walls, Mauro Carvalho Chehab +Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab Except when explicitly stated as GPL, programming examples within @@ -102,6 +113,13 @@ structs, ioctls) must be noted in more detail in the history chapter (compat.sgml), along with the possible impact on existing drivers and applications. --> + + 2.6.33 + 2009-12-03 + mk + Added documentation for the Digital Video timings API. + + 2.6.32 2009-08-31 @@ -355,7 +373,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 2.6.32 + Revision 2.6.33 &sub-common; @@ -411,6 +429,7 @@ and discussions on the V4L mailing list. &sub-encoder-cmd; &sub-enumaudio; &sub-enumaudioout; + &sub-enum-dv-presets; &sub-enum-fmt; &sub-enum-framesizes; &sub-enum-frameintervals; @@ -421,6 +440,8 @@ and discussions on the V4L mailing list. &sub-g-audioout; &sub-g-crop; &sub-g-ctrl; + &sub-g-dv-preset; + &sub-g-dv-timings; &sub-g-enc-index; &sub-g-ext-ctrls; &sub-g-fbuf; @@ -441,6 +462,7 @@ and discussions on the V4L mailing list. &sub-querybuf; &sub-querycap; &sub-queryctrl; + &sub-query-dv-preset; &sub-querystd; &sub-reqbufs; &sub-s-hw-freq-seek; diff --git a/trunk/Documentation/DocBook/v4l/videodev2.h.xml b/trunk/Documentation/DocBook/v4l/videodev2.h.xml index 3e282ed9f593..068325940658 100644 --- a/trunk/Documentation/DocBook/v4l/videodev2.h.xml +++ b/trunk/Documentation/DocBook/v4l/videodev2.h.xml @@ -733,6 +733,99 @@ struct v4l2_standard { __u32 reserved[4]; }; +/* + * V I D E O T I M I N G S D V P R E S E T + */ +struct v4l2_dv_preset { + __u32 preset; + __u32 reserved[4]; +}; + +/* + * D V P R E S E T S E N U M E R A T I O N + */ +struct v4l2_dv_enum_preset { + __u32 index; + __u32 preset; + __u8 name[32]; /* Name of the preset timing */ + __u32 width; + __u32 height; + __u32 reserved[4]; +}; + +/* + * D V P R E S E T V A L U E S + */ +#define V4L2_DV_INVALID 0 +#define V4L2_DV_480P59_94 1 /* BT.1362 */ +#define V4L2_DV_576P50 2 /* BT.1362 */ +#define V4L2_DV_720P24 3 /* SMPTE 296M */ +#define V4L2_DV_720P25 4 /* SMPTE 296M */ +#define V4L2_DV_720P30 5 /* SMPTE 296M */ +#define V4L2_DV_720P50 6 /* SMPTE 296M */ +#define V4L2_DV_720P59_94 7 /* SMPTE 274M */ +#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */ +#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */ +#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */ +#define V4L2_DV_1080I25 11 /* BT.1120 */ +#define V4L2_DV_1080I50 12 /* SMPTE 296M */ +#define V4L2_DV_1080I60 13 /* SMPTE 296M */ +#define V4L2_DV_1080P24 14 /* SMPTE 296M */ +#define V4L2_DV_1080P25 15 /* SMPTE 296M */ +#define V4L2_DV_1080P30 16 /* SMPTE 296M */ +#define V4L2_DV_1080P50 17 /* BT.1120 */ +#define V4L2_DV_1080P60 18 /* BT.1120 */ + +/* + * D V B T T I M I N G S + */ + +/* BT.656/BT.1120 timing data */ +struct v4l2_bt_timings { + __u32 width; /* width in pixels */ + __u32 height; /* height in lines */ + __u32 interlaced; /* Interlaced or progressive */ + __u32 polarities; /* Positive or negative polarity */ + __u64 pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz->74250000 */ + __u32 hfrontporch; /* Horizpontal front porch in pixels */ + __u32 hsync; /* Horizontal Sync length in pixels */ + __u32 hbackporch; /* Horizontal back porch in pixels */ + __u32 vfrontporch; /* Vertical front porch in pixels */ + __u32 vsync; /* Vertical Sync length in lines */ + __u32 vbackporch; /* Vertical back porch in lines */ + __u32 il_vfrontporch; /* Vertical front porch for bottom field of + * interlaced field formats + */ + __u32 il_vsync; /* Vertical sync length for bottom field of + * interlaced field formats + */ + __u32 il_vbackporch; /* Vertical back porch for bottom field of + * interlaced field formats + */ + __u32 reserved[16]; +} __attribute__ ((packed)); + +/* Interlaced or progressive format */ +#define V4L2_DV_PROGRESSIVE 0 +#define V4L2_DV_INTERLACED 1 + +/* Polarities. If bit is not set, it is assumed to be negative polarity */ +#define V4L2_DV_VSYNC_POS_POL 0x00000001 +#define V4L2_DV_HSYNC_POS_POL 0x00000002 + + +/* DV timings */ +struct v4l2_dv_timings { + __u32 type; + union { + struct v4l2_bt_timings bt; + __u32 reserved[32]; + }; +} __attribute__ ((packed)); + +/* Values for the type field */ +#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */ + /* * V I D E O I N P U T S */ @@ -744,7 +837,8 @@ struct v4l2_input { __u32 tuner; /* Associated tuner */ v4l2_std_id std; __u32 status; - __u32 reserved[4]; + __u32 capabilities; + __u32 reserved[3]; }; /* Values for the 'type' field */ @@ -775,6 +869,11 @@ struct v4l2_input { #define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */ #define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ +/* capabilities flags */ +#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ +#define V4L2_IN_CAP_CUSTOM_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ +#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */ + /* * V I D E O O U T P U T S */ @@ -785,13 +884,19 @@ struct v4l2_output { __u32 audioset; /* Associated audios (bitfield) */ __u32 modulator; /* Associated modulator */ v4l2_std_id std; - __u32 reserved[4]; + __u32 capabilities; + __u32 reserved[3]; }; /* Values for the 'type' field */ #define V4L2_OUTPUT_TYPE_MODULATOR 1 #define V4L2_OUTPUT_TYPE_ANALOG 2 #define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 +/* capabilities flags */ +#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ +#define V4L2_OUT_CAP_CUSTOM_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ +#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */ + /* * C O N T R O L S */ @@ -1626,6 +1731,13 @@ struct v4l2_dbg_chip_ident { #endif #define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) +#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset) +#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset) +#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset) +#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset) +#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings) +#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/trunk/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml b/trunk/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml new file mode 100644 index 000000000000..1d31427edd1b --- /dev/null +++ b/trunk/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml @@ -0,0 +1,238 @@ + + + ioctl VIDIOC_ENUM_DV_PRESETS + &manvol; + + + + VIDIOC_ENUM_DV_PRESETS + Enumerate supported Digital Video presets + + + + + + int ioctl + int fd + int request + struct v4l2_dv_enum_preset *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_ENUM_DV_PRESETS + + + + argp + + + + + + + + + Description + + To query the attributes of a DV preset, applications initialize the +index field and zero the reserved array of &v4l2-dv-enum-preset; +and call the VIDIOC_ENUM_DV_PRESETS ioctl with a pointer to this +structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all DV Presets supported, +applications shall begin at index zero, incrementing by one until the +driver returns EINVAL. Drivers may enumerate a +different set of DV presets after switching the video input or +output. + + + struct <structname>v4l2_dv_enum_presets</structname> + + &cs-str; + + + __u32 + index + Number of the DV preset, set by the +application. + + + __u32 + preset + This field identifies one of the DV preset values listed in . + + + __u8 + name[24] + Name of the preset, a NUL-terminated ASCII string, for example: "720P-60", "1080I-60". This information is +intended for the user. + + + __u32 + width + Width of the active video in pixels for the DV preset. + + + __u32 + height + Height of the active video in lines for the DV preset. + + + __u32 + reserved[4] + Reserved for future extensions. Drivers must set the array to zero. + + + +
+ + + struct <structname>DV Presets</structname> + + &cs-str; + + + Preset + Preset value + Description + + + + + + + + V4L2_DV_INVALID + 0 + Invalid preset value. + + + V4L2_DV_480P59_94 + 1 + 720x480 progressive video at 59.94 fps as per BT.1362. + + + V4L2_DV_576P50 + 2 + 720x576 progressive video at 50 fps as per BT.1362. + + + V4L2_DV_720P24 + 3 + 1280x720 progressive video at 24 fps as per SMPTE 296M. + + + V4L2_DV_720P25 + 4 + 1280x720 progressive video at 25 fps as per SMPTE 296M. + + + V4L2_DV_720P30 + 5 + 1280x720 progressive video at 30 fps as per SMPTE 296M. + + + V4L2_DV_720P50 + 6 + 1280x720 progressive video at 50 fps as per SMPTE 296M. + + + V4L2_DV_720P59_94 + 7 + 1280x720 progressive video at 59.94 fps as per SMPTE 274M. + + + V4L2_DV_720P60 + 8 + 1280x720 progressive video at 60 fps as per SMPTE 274M/296M. + + + V4L2_DV_1080I29_97 + 9 + 1920x1080 interlaced video at 29.97 fps as per BT.1120/SMPTE 274M. + + + V4L2_DV_1080I30 + 10 + 1920x1080 interlaced video at 30 fps as per BT.1120/SMPTE 274M. + + + V4L2_DV_1080I25 + 11 + 1920x1080 interlaced video at 25 fps as per BT.1120. + + + V4L2_DV_1080I50 + 12 + 1920x1080 interlaced video at 50 fps as per SMPTE 296M. + + + V4L2_DV_1080I60 + 13 + 1920x1080 interlaced video at 60 fps as per SMPTE 296M. + + + V4L2_DV_1080P24 + 14 + 1920x1080 progressive video at 24 fps as per SMPTE 296M. + + + V4L2_DV_1080P25 + 15 + 1920x1080 progressive video at 25 fps as per SMPTE 296M. + + + V4L2_DV_1080P30 + 16 + 1920x1080 progressive video at 30 fps as per SMPTE 296M. + + + V4L2_DV_1080P50 + 17 + 1920x1080 progressive video at 50 fps as per BT.1120. + + + V4L2_DV_1080P60 + 18 + 1920x1080 progressive video at 60 fps as per BT.1120. + + + +
+ + + + &return-value; + + + + EINVAL + + The &v4l2-dv-enum-preset; index +is out of bounds. + + + + + + + diff --git a/trunk/Documentation/DocBook/v4l/vidioc-enuminput.xml b/trunk/Documentation/DocBook/v4l/vidioc-enuminput.xml index 414856b82473..71b868e2fb8f 100644 --- a/trunk/Documentation/DocBook/v4l/vidioc-enuminput.xml +++ b/trunk/Documentation/DocBook/v4l/vidioc-enuminput.xml @@ -124,7 +124,13 @@ current input. __u32 - reserved[4] + capabilities + This field provides capabilities for the +input. See for flags. + + + __u32 + reserved[3] Reserved for future extensions. Drivers must set the array to zero. @@ -261,6 +267,34 @@ flag is set Macrovision has been detected. + + + + Input capabilities + + &cs-def; + + + V4L2_IN_CAP_PRESETS + 0x00000001 + This input supports setting DV presets by using VIDIOC_S_DV_PRESET. + + + V4L2_OUT_CAP_CUSTOM_TIMINGS + 0x00000002 + This input supports setting custom video timings by using VIDIOC_S_DV_TIMINGS. + + + V4L2_IN_CAP_STD + 0x00000004 + This input supports setting the TV standard by using VIDIOC_S_STD. + + + +
diff --git a/trunk/Documentation/DocBook/v4l/vidioc-enumoutput.xml b/trunk/Documentation/DocBook/v4l/vidioc-enumoutput.xml index e8d16dcd50cf..a281d26a195f 100644 --- a/trunk/Documentation/DocBook/v4l/vidioc-enumoutput.xml +++ b/trunk/Documentation/DocBook/v4l/vidioc-enumoutput.xml @@ -114,7 +114,13 @@ details on video standards and how to switch see __u32 - reserved[4] + capabilities + This field provides capabilities for the +output. See for flags. + + + __u32 + reserved[3] Reserved for future extensions. Drivers must set the array to zero. @@ -147,6 +153,34 @@ CVBS, S-Video, RGB. + + + Output capabilities + + &cs-def; + + + V4L2_OUT_CAP_PRESETS + 0x00000001 + This output supports setting DV presets by using VIDIOC_S_DV_PRESET. + + + V4L2_OUT_CAP_CUSTOM_TIMINGS + 0x00000002 + This output supports setting custom video timings by using VIDIOC_S_DV_TIMINGS. + + + V4L2_OUT_CAP_STD + 0x00000004 + This output supports setting the TV standard by using VIDIOC_S_STD. + + + +
+ &return-value; diff --git a/trunk/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml b/trunk/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml new file mode 100644 index 000000000000..3c6784e132f3 --- /dev/null +++ b/trunk/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml @@ -0,0 +1,111 @@ + + + ioctl VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET + &manvol; + + + + VIDIOC_G_DV_PRESET + VIDIOC_S_DV_PRESET + Query or select the DV preset of the current input or output + + + + + + int ioctl + int fd + int request + &v4l2-dv-preset; +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET + + + + argp + + + + + + + + + Description + To query and select the current DV preset, applications +use the VIDIOC_G_DV_PRESET and VIDIOC_S_DV_PRESET +ioctls which take a pointer to a &v4l2-dv-preset; type as argument. +Applications must zero the reserved array in &v4l2-dv-preset;. +VIDIOC_G_DV_PRESET returns a dv preset in the field +preset of &v4l2-dv-preset;. + + VIDIOC_S_DV_PRESET accepts a pointer to a &v4l2-dv-preset; +that has the preset value to be set. Applications must zero the reserved array in &v4l2-dv-preset;. +If the preset is not supported, it returns an &EINVAL; + + + + &return-value; + + + + EINVAL + + This ioctl is not supported, or the +VIDIOC_S_DV_PRESET,VIDIOC_S_DV_PRESET parameter was unsuitable. + + + + EBUSY + + The device is busy and therefore can not change the preset. + + + + + + struct <structname>v4l2_dv_preset</structname> + + &cs-str; + + + __u32 + preset + Preset value to represent the digital video timings + + + __u32 + reserved[4] + Reserved fields for future use + + + +
+ + + + + diff --git a/trunk/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml b/trunk/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml new file mode 100644 index 000000000000..ecc19576bb8f --- /dev/null +++ b/trunk/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml @@ -0,0 +1,224 @@ + + + ioctl VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS + &manvol; + + + + VIDIOC_G_DV_TIMINGS + VIDIOC_S_DV_TIMINGS + Get or set custom DV timings for input or output + + + + + + int ioctl + int fd + int request + &v4l2-dv-timings; +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS + + + + argp + + + + + + + + + Description + To set custom DV timings for the input or output, applications use the +VIDIOC_S_DV_TIMINGS ioctl and to get the current custom timings, +applications use the VIDIOC_G_DV_TIMINGS ioctl. The detailed timing +information is filled in using the structure &v4l2-dv-timings;. These ioctls take +a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not supported +or the timing values are not correct, the driver returns &EINVAL;. + + + + &return-value; + + + + EINVAL + + This ioctl is not supported, or the +VIDIOC_S_DV_TIMINGS parameter was unsuitable. + + + + EBUSY + + The device is busy and therefore can not change the timings. + + + + + + struct <structname>v4l2_bt_timings</structname> + + &cs-str; + + + __u32 + width + Width of the active video in pixels + + + __u32 + height + Height of the active video in lines + + + __u32 + interlaced + Progressive (0) or interlaced (1) + + + __u32 + polarities + This is a bit mask that defines polarities of sync signals. +bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_HSYNC_POS_POL) is for horizontal sync polarity. If the bit is set +(1) it is positive polarity and if is cleared (0), it is negative polarity. + + + __u64 + pixelclock + Pixel clock in Hz. Ex. 74.25MHz->74250000 + + + __u32 + hfrontporch + Horizontal front porch in pixels + + + __u32 + hsync + Horizontal sync length in pixels + + + __u32 + hbackporch + Horizontal back porch in pixels + + + __u32 + vfrontporch + Vertical front porch in lines + + + __u32 + vsync + Vertical sync length in lines + + + __u32 + vbackporch + Vertical back porch in lines + + + __u32 + il_vfrontporch + Vertical front porch in lines for bottom field of interlaced field formats + + + __u32 + il_vsync + Vertical sync length in lines for bottom field of interlaced field formats + + + __u32 + il_vbackporch + Vertical back porch in lines for bottom field of interlaced field formats + + + +
+ + + struct <structname>v4l2_dv_timings</structname> + + &cs-str; + + + __u32 + type + + Type of DV timings as listed in . + + + union + + + + + + &v4l2-bt-timings; + bt + Timings defined by BT.656/1120 specifications + + + + __u32 + reserved[32] + + + + +
+ + + DV Timing types + + &cs-str; + + + Timing type + value + Description + + + + + + + + V4L2_DV_BT_656_1120 + 0 + BT.656/1120 timings + + + +
+ + + + diff --git a/trunk/Documentation/DocBook/v4l/vidioc-g-std.xml b/trunk/Documentation/DocBook/v4l/vidioc-g-std.xml index b6f5d267e856..912f8513e5da 100644 --- a/trunk/Documentation/DocBook/v4l/vidioc-g-std.xml +++ b/trunk/Documentation/DocBook/v4l/vidioc-g-std.xml @@ -86,6 +86,12 @@ standards. VIDIOC_S_STD parameter was unsuitable. + + EBUSY + + The device is busy and therefore can not change the standard + + diff --git a/trunk/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/trunk/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml new file mode 100644 index 000000000000..87e4f0f6151c --- /dev/null +++ b/trunk/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml @@ -0,0 +1,85 @@ + + + ioctl VIDIOC_QUERY_DV_PRESET + &manvol; + + + + VIDIOC_QUERY_DV_PRESET + Sense the DV preset received by the current +input + + + + + + int ioctl + int fd + int request + &v4l2-dv-preset; *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_QUERY_DV_PRESET + + + + argp + + + + + + + + + Description + + The hardware may be able to detect the current DV preset +automatically, similar to sensing the video standard. To do so, applications +call VIDIOC_QUERY_DV_PRESET with a pointer to a +&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is +returned in the preset field of &v4l2-dv-preset;. When detection is not +possible or fails, the value V4L2_DV_INVALID is returned. + + + + &return-value; + + + EINVAL + + This ioctl is not supported. + + + + EBUSY + + The device is busy and therefore can not sense the preset + + + + + + + diff --git a/trunk/Documentation/DocBook/v4l/vidioc-querystd.xml b/trunk/Documentation/DocBook/v4l/vidioc-querystd.xml index b5a7ff934486..1a9e60393091 100644 --- a/trunk/Documentation/DocBook/v4l/vidioc-querystd.xml +++ b/trunk/Documentation/DocBook/v4l/vidioc-querystd.xml @@ -70,6 +70,12 @@ current video input or output. This ioctl is not supported. + + EBUSY + + The device is busy and therefore can not detect the standard + + diff --git a/trunk/Documentation/SubmitChecklist b/trunk/Documentation/SubmitChecklist index 78a9168ff377..1053a56be3b1 100644 --- a/trunk/Documentation/SubmitChecklist +++ b/trunk/Documentation/SubmitChecklist @@ -15,7 +15,7 @@ kernel patches. 2: Passes allnoconfig, allmodconfig 3: Builds on multiple CPU architectures by using local cross-compile tools - or something like PLM at OSDL. + or some other build farm. 4: ppc64 is a good architecture for cross-compilation checking because it tends to use `unsigned long' for 64-bit quantities. @@ -88,3 +88,6 @@ kernel patches. 24: All memory barriers {e.g., barrier(), rmb(), wmb()} need a comment in the source code that explains the logic of what they are doing and why. + +25: If any ioctl's are added by the patch, then also update + Documentation/ioctl/ioctl-number.txt. diff --git a/trunk/Documentation/acpi/method-customizing.txt b/trunk/Documentation/acpi/method-customizing.txt new file mode 100644 index 000000000000..e628cd23ca80 --- /dev/null +++ b/trunk/Documentation/acpi/method-customizing.txt @@ -0,0 +1,66 @@ +Linux ACPI Custom Control Method How To +======================================= + +Written by Zhang Rui + + +Linux supports customizing ACPI control methods at runtime. + +Users can use this to +1. override an existing method which may not work correctly, + or just for debugging purposes. +2. insert a completely new method in order to create a missing + method such as _OFF, _ON, _STA, _INI, etc. +For these cases, it is far simpler to dynamically install a single +control method rather than override the entire DSDT, because kernel +rebuild/reboot is not needed and test result can be got in minutes. + +Note: Only ACPI METHOD can be overridden, any other object types like + "Device", "OperationRegion", are not recognized. +Note: The same ACPI control method can be overridden for many times, + and it's always the latest one that used by Linux/kernel. + +1. override an existing method + a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT, + just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat" + b) disassemble the table by running "iasl -d dsdt.dat". + c) rewrite the ASL code of the method and save it in a new file, + d) package the new file (psr.asl) to an ACPI table format. + Here is an example of a customized \_SB._AC._PSR method, + + DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715) + { + External (ACON) + + Method (\_SB_.AC._PSR, 0, NotSerialized) + { + Store ("In AC _PSR", Debug) + Return (ACON) + } + } + Note that the full pathname of the method in ACPI namespace + should be used. + And remember to use "External" to declare external objects. + e) assemble the file to generate the AML code of the method. + e.g. "iasl psr.asl" (psr.aml is generated as a result) + f) mount debugfs by "mount -t debugfs none /sys/kernel/debug" + g) override the old method via the debugfs by running + "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method" + +2. insert a new method + This is easier than overriding an existing method. + We just need to create the ASL code of the method we want to + insert and then follow the step c) ~ g) in section 1. + +3. undo your changes + The "undo" operation is not supported for a new inserted method + right now, i.e. we can not remove a method currently. + For an overrided method, in order to undo your changes, please + save a copy of the method original ASL code in step c) section 1, + and redo step c) ~ g) to override the method with the original one. + + +Note: We can use a kernel with multiple custom ACPI method running, + But each individual write to debugfs can implement a SINGLE + method override. i.e. if we want to insert/override multiple + ACPI methods, we need to redo step c) ~ g) for multiple times. diff --git a/trunk/Documentation/blackfin/00-INDEX b/trunk/Documentation/blackfin/00-INDEX index d6840a91e1e1..c34e12440fec 100644 --- a/trunk/Documentation/blackfin/00-INDEX +++ b/trunk/Documentation/blackfin/00-INDEX @@ -1,9 +1,6 @@ 00-INDEX - This file -cache-lock.txt - - HOWTO for blackfin cache locking. - cachefeatures.txt - Supported cache features. diff --git a/trunk/Documentation/blackfin/Makefile b/trunk/Documentation/blackfin/Makefile new file mode 100644 index 000000000000..773dbb103f1c --- /dev/null +++ b/trunk/Documentation/blackfin/Makefile @@ -0,0 +1,6 @@ +obj-m := gptimers-example.o + +all: modules + +modules clean: + $(MAKE) -C ../.. SUBDIRS=$(PWD) $@ diff --git a/trunk/Documentation/blackfin/cache-lock.txt b/trunk/Documentation/blackfin/cache-lock.txt deleted file mode 100644 index 88ba1e6c31c3..000000000000 --- a/trunk/Documentation/blackfin/cache-lock.txt +++ /dev/null @@ -1,48 +0,0 @@ -/* - * File: Documentation/blackfin/cache-lock.txt - * Based on: - * Author: - * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin - * - * Rev: $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - */ - -How to lock your code in cache in uClinux/blackfin --------------------------------------------------- - -There are only a few steps required to lock your code into the cache. -Currently you can lock the code by Way. - -Below are the interface provided for locking the cache. - - -1. cache_grab_lock(int Ways); - -This function grab the lock for locking your code into the cache specified -by Ways. - - -2. cache_lock(int Ways); - -This function should be called after your critical code has been executed. -Once the critical code exits, the code is now loaded into the cache. This -function locks the code into the cache. - - -So, the example sequence will be: - - cache_grab_lock(WAY0_L); /* Grab the lock */ - - critical_code(); /* Execute the code of interest */ - - cache_lock(WAY0_L); /* Lock the cache */ - -Where WAY0_L signifies WAY0 locking. diff --git a/trunk/Documentation/blackfin/cachefeatures.txt b/trunk/Documentation/blackfin/cachefeatures.txt index 0fbec23becb5..75de51f94515 100644 --- a/trunk/Documentation/blackfin/cachefeatures.txt +++ b/trunk/Documentation/blackfin/cachefeatures.txt @@ -41,16 +41,6 @@ icplb_flush(); dcplb_flush(); - - Locking the cache. - - cache_grab_lock(); - cache_lock(); - - Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to - lock the cache. - - Locking the cache is optional feature. - - Miscellaneous cache functions. flush_cache_all(); diff --git a/trunk/Documentation/blackfin/gptimers-example.c b/trunk/Documentation/blackfin/gptimers-example.c new file mode 100644 index 000000000000..b1bd6340e748 --- /dev/null +++ b/trunk/Documentation/blackfin/gptimers-example.c @@ -0,0 +1,83 @@ +/* + * Simple gptimers example + * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers + * + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include + +#include +#include + +/* ... random driver includes ... */ + +#define DRIVER_NAME "gptimer_example" + +struct gptimer_data { + uint32_t period, width; +}; +static struct gptimer_data data; + +/* ... random driver state ... */ + +static irqreturn_t gptimer_example_irq(int irq, void *dev_id) +{ + struct gptimer_data *data = dev_id; + + /* make sure it was our timer which caused the interrupt */ + if (!get_gptimer_intr(TIMER5_id)) + return IRQ_NONE; + + /* read the width/period values that were captured for the waveform */ + data->width = get_gptimer_pwidth(TIMER5_id); + data->period = get_gptimer_period(TIMER5_id); + + /* acknowledge the interrupt */ + clear_gptimer_intr(TIMER5_id); + + /* tell the upper layers we took care of things */ + return IRQ_HANDLED; +} + +/* ... random driver code ... */ + +static int __init gptimer_example_init(void) +{ + int ret; + + /* grab the peripheral pins */ + ret = peripheral_request(P_TMR5, DRIVER_NAME); + if (ret) { + printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n"); + return ret; + } + + /* grab the IRQ for the timer */ + ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data); + if (ret) { + printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n"); + peripheral_free(P_TMR5); + return ret; + } + + /* setup the timer and enable it */ + set_gptimer_config(TIMER5_id, WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA); + enable_gptimers(TIMER5bit); + + return 0; +} +module_init(gptimer_example_init); + +static void __exit gptimer_example_exit(void) +{ + disable_gptimers(TIMER5bit); + free_irq(IRQ_TIMER5, &data); + peripheral_free(P_TMR5); +} +module_exit(gptimer_example_exit); + +MODULE_LICENSE("BSD"); diff --git a/trunk/Documentation/cpu-hotplug.txt b/trunk/Documentation/cpu-hotplug.txt index 4d4a644b505e..a99d7031cdf9 100644 --- a/trunk/Documentation/cpu-hotplug.txt +++ b/trunk/Documentation/cpu-hotplug.txt @@ -315,41 +315,26 @@ A: The following are what is required for CPU hotplug infrastructure to work Q: I need to ensure that a particular cpu is not removed when there is some work specific to this cpu is in progress. -A: First switch the current thread context to preferred cpu +A: There are two ways. If your code can be run in interrupt context, use + smp_call_function_single(), otherwise use work_on_cpu(). Note that + work_on_cpu() is slow, and can fail due to out of memory: int my_func_on_cpu(int cpu) { - cpumask_t saved_mask, new_mask = CPU_MASK_NONE; - int curr_cpu, err = 0; - - saved_mask = current->cpus_allowed; - cpu_set(cpu, new_mask); - err = set_cpus_allowed(current, new_mask); - - if (err) - return err; - - /* - * If we got scheduled out just after the return from - * set_cpus_allowed() before running the work, this ensures - * we stay locked. - */ - curr_cpu = get_cpu(); - - if (curr_cpu != cpu) { - err = -EAGAIN; - goto ret; - } else { - /* - * Do work : But cant sleep, since get_cpu() disables preempt - */ - } - ret: - put_cpu(); - set_cpus_allowed(current, saved_mask); - return err; - } - + int err; + get_online_cpus(); + if (!cpu_online(cpu)) + err = -EINVAL; + else +#if NEEDS_BLOCKING + err = work_on_cpu(cpu, __my_func_on_cpu, NULL); +#else + smp_call_function_single(cpu, __my_func_on_cpu, &err, + true); +#endif + put_online_cpus(); + return err; + } Q: How do we determine how many CPUs are available for hotplug. A: There is no clear spec defined way from ACPI that can give us that diff --git a/trunk/Documentation/dontdiff b/trunk/Documentation/dontdiff index e151b2a36267..3ad6acead949 100644 --- a/trunk/Documentation/dontdiff +++ b/trunk/Documentation/dontdiff @@ -103,6 +103,7 @@ gconf gen-devlist gen_crc32table gen_init_cpio +generated genheaders genksyms *_gray256.c diff --git a/trunk/Documentation/fb/viafb.txt b/trunk/Documentation/fb/viafb.txt index 67dbf442b0b6..f3e046a6a987 100644 --- a/trunk/Documentation/fb/viafb.txt +++ b/trunk/Documentation/fb/viafb.txt @@ -7,7 +7,7 @@ VIA UniChrome Family(CLE266, PM800 / CN400 / CN300, P4M800CE / P4M800Pro / CN700 / VN800, CX700 / VX700, K8M890, P4M890, - CN896 / P4M900, VX800) + CN896 / P4M900, VX800, VX855) [Driver features] ------------------------ @@ -154,13 +154,6 @@ 0 : No Dual Edge Panel (default) 1 : Dual Edge Panel - viafb_video_dev: - This option is used to specify video output devices(CRT, DVI, LCD) for - duoview case. - For example: - To output video on DVI, we should use: - modprobe viafb viafb_video_dev=DVI... - viafb_lcd_port: This option is used to specify LCD output port, available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW". @@ -181,9 +174,6 @@ Notes: and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE instead of calling common ioctl function FBIOPUT_VSCREENINFO since viafb doesn't support multi-head well, or it will cause screen crush. - 4. VX800 2D accelerator hasn't been supported in this driver yet. When - using driver on VX800, the driver will disable the acceleration - function as default. [Configure viafb with "fbset" tool] diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt index 21ab9357326d..870d190fe617 100644 --- a/trunk/Documentation/feature-removal-schedule.txt +++ b/trunk/Documentation/feature-removal-schedule.txt @@ -474,3 +474,22 @@ Why: Obsoleted by the adt7475 driver. Who: Jean Delvare --------------------------- +What: Support for lcd_switch and display_get in asus-laptop driver +When: March 2010 +Why: These two features use non-standard interfaces. There are the + only features that really need multiple path to guess what's + the right method name on a specific laptop. + + Removing them will allow to remove a lot of code an significantly + clean the drivers. + + This will affect the backlight code which won't be able to know + if the backlight is on or off. The platform display file will also be + write only (like the one in eeepc-laptop). + + This should'nt affect a lot of user because they usually know + when their display is on or off. + +Who: Corentin Chary + +---------------------------- diff --git a/trunk/Documentation/filesystems/00-INDEX b/trunk/Documentation/filesystems/00-INDEX index 7001782ab932..875d49696b6e 100644 --- a/trunk/Documentation/filesystems/00-INDEX +++ b/trunk/Documentation/filesystems/00-INDEX @@ -1,7 +1,5 @@ 00-INDEX - this file (info on some of the filesystems supported by linux). -Exporting - - explanation of how to make filesystems exportable. Locking - info on locking rules as they pertain to Linux VFS. 9p.txt @@ -68,12 +66,8 @@ mandatory-locking.txt - info on the Linux implementation of Sys V mandatory file locking. ncpfs.txt - info on Novell Netware(tm) filesystem using NCP protocol. -nfs41-server.txt - - info on the Linux server implementation of NFSv4 minor version 1. -nfs-rdma.txt - - how to install and setup the Linux NFS/RDMA client and server software. -nfsroot.txt - - short guide on setting up a diskless box with NFS root filesystem. +nfs/ + - nfs-related documentation. nilfs2.txt - info and mount options for the NILFS2 filesystem. ntfs.txt @@ -92,8 +86,6 @@ relay.txt - info on relay, for efficient streaming from kernel to user space. romfs.txt - description of the ROMFS filesystem. -rpc-cache.txt - - introduction to the caching mechanisms in the sunrpc layer. seq_file.txt - how to use the seq_file API sharedsubtree.txt diff --git a/trunk/Documentation/filesystems/nfs/00-INDEX b/trunk/Documentation/filesystems/nfs/00-INDEX new file mode 100644 index 000000000000..2f68cd688769 --- /dev/null +++ b/trunk/Documentation/filesystems/nfs/00-INDEX @@ -0,0 +1,16 @@ +00-INDEX + - this file (nfs-related documentation). +Exporting + - explanation of how to make filesystems exportable. +knfsd-stats.txt + - statistics which the NFS server makes available to user space. +nfs.txt + - nfs client, and DNS resolution for fs_locations. +nfs41-server.txt + - info on the Linux server implementation of NFSv4 minor version 1. +nfs-rdma.txt + - how to install and setup the Linux NFS/RDMA client and server software +nfsroot.txt + - short guide on setting up a diskless box with NFS root filesystem. +rpc-cache.txt + - introduction to the caching mechanisms in the sunrpc layer. diff --git a/trunk/Documentation/filesystems/Exporting b/trunk/Documentation/filesystems/nfs/Exporting similarity index 100% rename from trunk/Documentation/filesystems/Exporting rename to trunk/Documentation/filesystems/nfs/Exporting diff --git a/trunk/Documentation/filesystems/knfsd-stats.txt b/trunk/Documentation/filesystems/nfs/knfsd-stats.txt similarity index 100% rename from trunk/Documentation/filesystems/knfsd-stats.txt rename to trunk/Documentation/filesystems/nfs/knfsd-stats.txt diff --git a/trunk/Documentation/filesystems/nfs-rdma.txt b/trunk/Documentation/filesystems/nfs/nfs-rdma.txt similarity index 100% rename from trunk/Documentation/filesystems/nfs-rdma.txt rename to trunk/Documentation/filesystems/nfs/nfs-rdma.txt diff --git a/trunk/Documentation/filesystems/nfs.txt b/trunk/Documentation/filesystems/nfs/nfs.txt similarity index 100% rename from trunk/Documentation/filesystems/nfs.txt rename to trunk/Documentation/filesystems/nfs/nfs.txt diff --git a/trunk/Documentation/filesystems/nfs41-server.txt b/trunk/Documentation/filesystems/nfs/nfs41-server.txt similarity index 96% rename from trunk/Documentation/filesystems/nfs41-server.txt rename to trunk/Documentation/filesystems/nfs/nfs41-server.txt index 5920fe26e6ff..1bd0d0c05171 100644 --- a/trunk/Documentation/filesystems/nfs41-server.txt +++ b/trunk/Documentation/filesystems/nfs/nfs41-server.txt @@ -41,7 +41,7 @@ interoperability problems with future clients. Known issues: conformant with the spec (for example, we don't use kerberos on the backchannel correctly). - no trunking support: no clients currently take advantage of - trunking, but this is a mandatory failure, and its use is + trunking, but this is a mandatory feature, and its use is recommended to clients in a number of places. (E.g. to ensure timely renewal in case an existing connection's retry timeouts have gotten too long; see section 8.3 of the draft.) @@ -213,3 +213,10 @@ The following cases aren't supported yet: DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID. * DESTROY_SESSION MUST be the final operation in the COMPOUND request. +Nonstandard compound limitations: +* No support for a sessions fore channel RPC compound that requires both a + ca_maxrequestsize request and a ca_maxresponsesize reply, so we may + fail to live up to the promise we made in CREATE_SESSION fore channel + negotiation. +* No more than one IO operation (read, write, readdir) allowed per + compound. diff --git a/trunk/Documentation/filesystems/nfsroot.txt b/trunk/Documentation/filesystems/nfs/nfsroot.txt similarity index 100% rename from trunk/Documentation/filesystems/nfsroot.txt rename to trunk/Documentation/filesystems/nfs/nfsroot.txt diff --git a/trunk/Documentation/filesystems/rpc-cache.txt b/trunk/Documentation/filesystems/nfs/rpc-cache.txt similarity index 100% rename from trunk/Documentation/filesystems/rpc-cache.txt rename to trunk/Documentation/filesystems/nfs/rpc-cache.txt diff --git a/trunk/Documentation/filesystems/porting b/trunk/Documentation/filesystems/porting index 92b888d540a6..a7e9746ee7ea 100644 --- a/trunk/Documentation/filesystems/porting +++ b/trunk/Documentation/filesystems/porting @@ -140,7 +140,7 @@ Callers of notify_change() need ->i_mutex now. New super_block field "struct export_operations *s_export_op" for explicit support for exporting, e.g. via NFS. The structure is fully documented at its declaration in include/linux/fs.h, and in -Documentation/filesystems/Exporting. +Documentation/filesystems/nfs/Exporting. Briefly it allows for the definition of decode_fh and encode_fh operations to encode and decode filehandles, and allows the filesystem to use diff --git a/trunk/Documentation/filesystems/seq_file.txt b/trunk/Documentation/filesystems/seq_file.txt index 0d15ebccf5b0..a1e2e0dda907 100644 --- a/trunk/Documentation/filesystems/seq_file.txt +++ b/trunk/Documentation/filesystems/seq_file.txt @@ -248,9 +248,7 @@ code, that is done in the initialization code in the usual way: { struct proc_dir_entry *entry; - entry = create_proc_entry("sequence", 0, NULL); - if (entry) - entry->proc_fops = &ct_file_ops; + proc_create("sequence", 0, NULL, &ct_file_ops); return 0; } diff --git a/trunk/Documentation/gpio.txt b/trunk/Documentation/gpio.txt index e4e7daed2ba8..1866c27eec69 100644 --- a/trunk/Documentation/gpio.txt +++ b/trunk/Documentation/gpio.txt @@ -531,6 +531,13 @@ and have the following read/write attributes: This file exists only if the pin can be configured as an interrupt generating input pin. + "active_low" ... reads as either 0 (false) or 1 (true). Write + any nonzero value to invert the value attribute both + for reading and writing. Existing and subsequent + poll(2) support configuration via the edge attribute + for "rising" and "falling" edges will follow this + setting. + GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the controller implementing GPIOs starting at #42) and have the following read-only attributes: @@ -566,6 +573,8 @@ requested using gpio_request(): int gpio_export_link(struct device *dev, const char *name, unsigned gpio) + /* change the polarity of a GPIO node in sysfs */ + int gpio_sysfs_set_active_low(unsigned gpio, int value); After a kernel driver requests a GPIO, it may only be made available in the sysfs interface by gpio_export(). The driver can control whether the @@ -580,3 +589,9 @@ After the GPIO has been exported, gpio_export_link() allows creating symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can use this to provide the interface under their own device in sysfs with a descriptive name. + +Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity +differences between boards from user space. This only affects the +sysfs interface. Polarity change can be done both before and after +gpio_export(), and previously enabled poll(2) support for either +rising or falling edge will be reconfigured to follow this setting. diff --git a/trunk/Documentation/hwmon/k10temp b/trunk/Documentation/hwmon/k10temp new file mode 100644 index 000000000000..a7a18d453a51 --- /dev/null +++ b/trunk/Documentation/hwmon/k10temp @@ -0,0 +1,60 @@ +Kernel driver k10temp +===================== + +Supported chips: +* AMD Family 10h processors: + Socket F: Quad-Core/Six-Core/Embedded Opteron + Socket AM2+: Opteron, Phenom (II) X3/X4 + Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II + Socket S1G3: Athlon II, Sempron, Turion II +* AMD Family 11h processors: + Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) + + Prefix: 'k10temp' + Addresses scanned: PCI space + Datasheets: + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/31116.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41256.pdf + Revision Guide for AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/41322.pdf + Revision Guide for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41788.pdf + AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks: + http://support.amd.com/us/Processor_TechDocs/43373.pdf + AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43374.pdf + AMD Family 10h Desktop Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43375.pdf + +Author: Clemens Ladisch + +Description +----------- + +This driver permits reading of the internal temperature sensor of AMD +Family 10h and 11h processors. + +All these processors have a sensor, but on older revisions of Family 10h +processors, the sensor may return inconsistent values (erratum 319). The +driver will refuse to load on these revisions unless you specify the +"force=1" module parameter. + +There is one temperature measurement value, available as temp1_input in +sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree. +Please note that it is defined as a relative value; to quote the AMD manual: + + Tctl is the processor temperature control value, used by the platform to + control cooling systems. Tctl is a non-physical temperature on an + arbitrary scale measured in degrees. It does _not_ represent an actual + physical temperature like die or case temperature. Instead, it specifies + the processor temperature relative to the point at which the system must + supply the maximum cooling for the processor's specified maximum case + temperature and maximum thermal power dissipation. + +The maximum value for Tctl is available in the file temp1_max. + +If the BIOS has enabled hardware temperature control, the threshold at +which the processor will throttle itself to avoid damage is available in +temp1_crit and temp1_crit_hyst. diff --git a/trunk/Documentation/infiniband/ipoib.txt b/trunk/Documentation/infiniband/ipoib.txt index 6d40f00b358c..64eeb55d0c09 100644 --- a/trunk/Documentation/infiniband/ipoib.txt +++ b/trunk/Documentation/infiniband/ipoib.txt @@ -36,11 +36,11 @@ Datagram vs Connected modes fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes. In connected mode, the IB RC (Reliable Connected) transport is used. - Connected mode is to takes advantage of the connected nature of the - IB transport and allows an MTU up to the maximal IP packet size of - 64K, which reduces the number of IP packets needed for handling - large UDP datagrams, TCP segments, etc and increases the performance - for large messages. + Connected mode takes advantage of the connected nature of the IB + transport and allows an MTU up to the maximal IP packet size of 64K, + which reduces the number of IP packets needed for handling large UDP + datagrams, TCP segments, etc and increases the performance for large + messages. In connected mode, the interface's UD QP is still used for multicast and communication with peers that don't support connected mode. In diff --git a/trunk/Documentation/kbuild/kbuild.txt b/trunk/Documentation/kbuild/kbuild.txt index bb3bf38f03da..6f8c1cabbc5d 100644 --- a/trunk/Documentation/kbuild/kbuild.txt +++ b/trunk/Documentation/kbuild/kbuild.txt @@ -1,3 +1,17 @@ +Output files + +modules.order +-------------------------------------------------- +This file records the order in which modules appear in Makefiles. This +is used by modprobe to deterministically resolve aliases that match +multiple modules. + +modules.builtin +-------------------------------------------------- +This file lists all modules that are built into the kernel. This is used +by modprobe to not fail when trying to load something builtin. + + Environment variables KCPPFLAGS diff --git a/trunk/Documentation/kbuild/kconfig.txt b/trunk/Documentation/kbuild/kconfig.txt index 849b5e56d06f..49efae703979 100644 --- a/trunk/Documentation/kbuild/kconfig.txt +++ b/trunk/Documentation/kbuild/kconfig.txt @@ -103,10 +103,16 @@ KCONFIG_AUTOCONFIG This environment variable can be set to specify the path & name of the "auto.conf" file. Its default value is "include/config/auto.conf". +KCONFIG_TRISTATE +-------------------------------------------------- +This environment variable can be set to specify the path & name of the +"tristate.conf" file. Its default value is "include/config/tristate.conf". + KCONFIG_AUTOHEADER -------------------------------------------------- This environment variable can be set to specify the path & name of the -"autoconf.h" (header) file. Its default value is "include/linux/autoconf.h". +"autoconf.h" (header) file. +Its default value is "include/generated/autoconf.h". ====================================================================== diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index ab95d3ada5c7..5ba4d9dff113 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -1032,7 +1032,7 @@ and is between 256 and 4096 characters. It is defined in the file No delay ip= [IP_PNP] - See Documentation/filesystems/nfsroot.txt. + See Documentation/filesystems/nfs/nfsroot.txt. ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards See comment before ip2_setup() in @@ -1553,10 +1553,10 @@ and is between 256 and 4096 characters. It is defined in the file going to be removed in 2.6.29. nfsaddrs= [NFS] - See Documentation/filesystems/nfsroot.txt. + See Documentation/filesystems/nfs/nfsroot.txt. nfsroot= [NFS] nfs root filesystem for disk-less boxes. - See Documentation/filesystems/nfsroot.txt. + See Documentation/filesystems/nfs/nfsroot.txt. nfs.callback_tcpport= [NFS] set the TCP port on which the NFSv4 callback @@ -2729,6 +2729,11 @@ and is between 256 and 4096 characters. It is defined in the file vmpoff= [KNL,S390] Perform z/VM CP command after power off. Format: + vt.cur_default= [VT] Default cursor shape. + Format: 0xCCBBAA, where AA, BB, and CC are the same as + the parameters of the [?A;B;Cc escape sequence; + see VGA-softcursor.txt. Default: 2 = underline. + vt.default_blu= [VT] Format: ,,,..., Change the default blue palette of the console. diff --git a/trunk/Documentation/laptops/thinkpad-acpi.txt b/trunk/Documentation/laptops/thinkpad-acpi.txt index aafcaa634191..169091f75e6d 100644 --- a/trunk/Documentation/laptops/thinkpad-acpi.txt +++ b/trunk/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.23 - April 10th, 2009 + Version 0.24 + December 11th, 2009 Borislav Deianov Henrique de Moraes Holschuh @@ -460,6 +460,8 @@ event code Key Notes For Lenovo ThinkPads with a new BIOS, it has to be handled either by the ACPI OSI, or by userspace. + The driver does the right thing, + never mess with this. 0x1011 0x10 FN+END Brightness down. See brightness up for details. @@ -582,46 +584,15 @@ with hotkey_report_mode. Brightness hotkey notes: -These are the current sane choices for brightness key mapping in -thinkpad-acpi: +Don't mess with the brightness hotkeys in a Thinkpad. If you want +notifications for OSD, use the sysfs backlight class event support. -For IBM and Lenovo models *without* ACPI backlight control (the ones on -which thinkpad-acpi will autoload its backlight interface by default, -and on which ACPI video does not export a backlight interface): - -1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as - these older firmware versions unfortunately won't respect the hotkey - mask for brightness keys anyway, and always reacts to them. This - usually work fine, unless X.org drivers are doing something to block - the BIOS. In that case, use (3) below. This is the default mode of - operation. - -2. Enable the hotkeys, but map them to something else that is NOT - KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause - userspace to try to change the backlight level, and use that as an - on-screen-display hint. - -3. IF AND ONLY IF X.org drivers find a way to block the firmware from - automatically changing the brightness, enable the hotkeys and map - them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to - something that calls xbacklight. thinkpad-acpi will not be able to - change brightness in that case either, so you should disable its - backlight interface. - -For Lenovo models *with* ACPI backlight control: - -1. Load up ACPI video and use that. ACPI video will report ACPI - events for brightness change keys. Do not mess with thinkpad-acpi - defaults in this case. thinkpad-acpi should not have anything to do - with backlight events in a scenario where ACPI video is loaded: - brightness hotkeys must be disabled, and the backlight interface is - to be kept disabled as well. This is the default mode of operation. - -2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi, - and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process - these keys on userspace somehow (e.g. by calling xbacklight). - The driver will do this automatically if it detects that ACPI video - has been disabled. +The driver will issue KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN events +automatically for the cases were userspace has to do something to +implement brightness changes. When you override these events, you will +either fail to handle properly the ThinkPads that require explicit +action to change backlight brightness, or the ThinkPads that require +that no action be taken to work properly. Bluetooth @@ -1121,25 +1092,61 @@ WARNING: its level up and down at every change. -Volume control -- /proc/acpi/ibm/volume ---------------------------------------- +Volume control +-------------- + +procfs: /proc/acpi/ibm/volume +ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC" + +NOTE: by default, the volume control interface operates in read-only +mode, as it is supposed to be used for on-screen-display purposes. +The read/write mode can be enabled through the use of the +"volume_control=1" module parameter. -This feature allows volume control on ThinkPad models which don't have -a hardware volume knob. The available commands are: +NOTE: distros are urged to not enable volume_control by default, this +should be done by the local admin only. The ThinkPad UI is for the +console audio control to be done through the volume keys only, and for +the desktop environment to just provide on-screen-display feedback. +Software volume control should be done only in the main AC97/HDA +mixer. + +This feature allows volume control on ThinkPad models with a digital +volume knob (when available, not all models have it), as well as +mute/unmute control. The available commands are: echo up >/proc/acpi/ibm/volume echo down >/proc/acpi/ibm/volume echo mute >/proc/acpi/ibm/volume + echo unmute >/proc/acpi/ibm/volume echo 'level ' >/proc/acpi/ibm/volume -The number range is 0 to 15 although not all of them may be +The number range is 0 to 14 although not all of them may be distinct. The unmute the volume after the mute command, use either the -up or down command (the level command will not unmute the volume). +up or down command (the level command will not unmute the volume), or +the unmute command. + The current volume level and mute state is shown in the file. -The ALSA mixer interface to this feature is still missing, but patches -to add it exist. That problem should be addressed in the not so -distant future. +You can use the volume_capabilities parameter to tell the driver +whether your thinkpad has volume control or mute-only control: +volume_capabilities=1 for mixers with mute and volume control, +volume_capabilities=2 for mixers with only mute control. + +If the driver misdetects the capabilities for your ThinkPad model, +please report this to ibm-acpi-devel@lists.sourceforge.net, so that we +can update the driver. + +There are two strategies for volume control. To select which one +should be used, use the volume_mode module parameter: volume_mode=1 +selects EC mode, and volume_mode=3 selects EC mode with NVRAM backing +(so that volume/mute changes are remembered across shutdown/reboot). + +The driver will operate in volume_mode=3 by default. If that does not +work well on your ThinkPad model, please report this to +ibm-acpi-devel@lists.sourceforge.net. + +The driver supports the standard ALSA module parameters. If the ALSA +mixer is disabled, the driver will disable all volume functionality. Fan control and monitoring: fan speed, fan enable/disable @@ -1405,6 +1412,7 @@ to enable more than one output class, just add their values. 0x0008 HKEY event interface, hotkeys 0x0010 Fan control 0x0020 Backlight brightness + 0x0040 Audio mixer/volume control There is also a kernel build option to enable more debugging information, which may be necessary to debug driver problems. @@ -1465,3 +1473,9 @@ Sysfs interface changelog: and it is always able to disable hot keys. Very old thinkpads are properly supported. hotkey_bios_mask is deprecated and marked for removal. + +0x020600: Marker for backlight change event support. + +0x020700: Support for mute-only mixers. + Volume control in read-only mode by default. + Marker for ALSA mixer support. diff --git a/trunk/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt b/trunk/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt new file mode 100644 index 000000000000..515ebcf1b97d --- /dev/null +++ b/trunk/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt @@ -0,0 +1,93 @@ +PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator) + +Device nodes needed for operation of the ppc440spe-adma driver +are specified hereby. These are I2O/DMA, DMA and XOR nodes +for DMA engines and Memory Queue Module node. The latter is used +by ADMA driver for configuration of RAID-6 H/W capabilities of +the PPC440SPe. In addition to the nodes and properties described +below, the ranges property of PLB node must specify ranges for +DMA devices. + + i) The I2O node + + Required properties: + + - compatible : "ibm,i2o-440spe"; + - reg : + - dcr-reg : + + Example: + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + + ii) The DMA node + + Required properties: + + - compatible : "ibm,dma-440spe"; + - cell-index : 1 cell, hardware index of the DMA engine + (typically 0x0 and 0x1 for DMA0 and DMA1) + - reg : + - dcr-reg : + - interrupts : . + - interrupt-parent : needed for interrupt mapping + + Example: + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + + iii) XOR Accelerator node + + Required properties: + + - compatible : "amcc,xor-accelerator"; + - reg : + - interrupts : + - interrupt-parent : for interrupt mapping + + Example: + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; + + + iv) Memory Queue Module node + + Required properties: + + - compatible : "ibm,mq-440spe"; + - dcr-reg : + + Example: + + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + diff --git a/trunk/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt b/trunk/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt new file mode 100644 index 000000000000..b558585b1aaf --- /dev/null +++ b/trunk/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt @@ -0,0 +1,109 @@ + +Nintendo GameCube device tree +============================= + +1) The "flipper" node + + This node represents the multi-function "Flipper" chip, which packages + many of the devices found in the Nintendo GameCube. + + Required properties: + + - compatible : Should be "nintendo,flipper" + +1.a) The Video Interface (VI) node + + Represents the interface between the graphics processor and a external + video encoder. + + Required properties: + + - compatible : should be "nintendo,flipper-vi" + - reg : should contain the VI registers location and length + - interrupts : should contain the VI interrupt + +1.b) The Processor Interface (PI) node + + Represents the data and control interface between the main processor + and graphics and audio processor. + + Required properties: + + - compatible : should be "nintendo,flipper-pi" + - reg : should contain the PI registers location and length + +1.b.i) The "Flipper" interrupt controller node + + Represents the interrupt controller within the "Flipper" chip. + The node for the "Flipper" interrupt controller must be placed under + the PI node. + + Required properties: + + - compatible : should be "nintendo,flipper-pic" + +1.c) The Digital Signal Procesor (DSP) node + + Represents the digital signal processor interface, designed to offload + audio related tasks. + + Required properties: + + - compatible : should be "nintendo,flipper-dsp" + - reg : should contain the DSP registers location and length + - interrupts : should contain the DSP interrupt + +1.c.i) The Auxiliary RAM (ARAM) node + + Represents the non cpu-addressable ram designed mainly to store audio + related information. + The ARAM node must be placed under the DSP node. + + Required properties: + + - compatible : should be "nintendo,flipper-aram" + - reg : should contain the ARAM start (zero-based) and length + +1.d) The Disk Interface (DI) node + + Represents the interface used to communicate with mass storage devices. + + Required properties: + + - compatible : should be "nintendo,flipper-di" + - reg : should contain the DI registers location and length + - interrupts : should contain the DI interrupt + +1.e) The Audio Interface (AI) node + + Represents the interface to the external 16-bit stereo digital-to-analog + converter. + + Required properties: + + - compatible : should be "nintendo,flipper-ai" + - reg : should contain the AI registers location and length + - interrupts : should contain the AI interrupt + +1.f) The Serial Interface (SI) node + + Represents the interface to the four single bit serial interfaces. + The SI is a proprietary serial interface used normally to control gamepads. + It's NOT a RS232-type interface. + + Required properties: + + - compatible : should be "nintendo,flipper-si" + - reg : should contain the SI registers location and length + - interrupts : should contain the SI interrupt + +1.g) The External Interface (EXI) node + + Represents the multi-channel SPI-like interface. + + Required properties: + + - compatible : should be "nintendo,flipper-exi" + - reg : should contain the EXI registers location and length + - interrupts : should contain the EXI interrupt + diff --git a/trunk/Documentation/powerpc/dts-bindings/nintendo/wii.txt b/trunk/Documentation/powerpc/dts-bindings/nintendo/wii.txt new file mode 100644 index 000000000000..a7e155a023b8 --- /dev/null +++ b/trunk/Documentation/powerpc/dts-bindings/nintendo/wii.txt @@ -0,0 +1,184 @@ + +Nintendo Wii device tree +======================== + +0) The root node + + This node represents the Nintendo Wii video game console. + + Required properties: + + - model : Should be "nintendo,wii" + - compatible : Should be "nintendo,wii" + +1) The "hollywood" node + + This node represents the multi-function "Hollywood" chip, which packages + many of the devices found in the Nintendo Wii. + + Required properties: + + - compatible : Should be "nintendo,hollywood" + +1.a) The Video Interface (VI) node + + Represents the interface between the graphics processor and a external + video encoder. + + Required properties: + + - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi" + - reg : should contain the VI registers location and length + - interrupts : should contain the VI interrupt + +1.b) The Processor Interface (PI) node + + Represents the data and control interface between the main processor + and graphics and audio processor. + + Required properties: + + - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi" + - reg : should contain the PI registers location and length + +1.b.i) The "Flipper" interrupt controller node + + Represents the "Flipper" interrupt controller within the "Hollywood" chip. + The node for the "Flipper" interrupt controller must be placed under + the PI node. + + Required properties: + + - #interrupt-cells : <1> + - compatible : should be "nintendo,flipper-pic" + - interrupt-controller + +1.c) The Digital Signal Procesor (DSP) node + + Represents the digital signal processor interface, designed to offload + audio related tasks. + + Required properties: + + - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp" + - reg : should contain the DSP registers location and length + - interrupts : should contain the DSP interrupt + +1.d) The Serial Interface (SI) node + + Represents the interface to the four single bit serial interfaces. + The SI is a proprietary serial interface used normally to control gamepads. + It's NOT a RS232-type interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si" + - reg : should contain the SI registers location and length + - interrupts : should contain the SI interrupt + +1.e) The Audio Interface (AI) node + + Represents the interface to the external 16-bit stereo digital-to-analog + converter. + + Required properties: + + - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai" + - reg : should contain the AI registers location and length + - interrupts : should contain the AI interrupt + +1.f) The External Interface (EXI) node + + Represents the multi-channel SPI-like interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi" + - reg : should contain the EXI registers location and length + - interrupts : should contain the EXI interrupt + +1.g) The Open Host Controller Interface (OHCI) nodes + + Represent the USB 1.x Open Host Controller Interfaces. + + Required properties: + + - compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci" + - reg : should contain the OHCI registers location and length + - interrupts : should contain the OHCI interrupt + +1.h) The Enhanced Host Controller Interface (EHCI) node + + Represents the USB 2.0 Enhanced Host Controller Interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci" + - reg : should contain the EHCI registers location and length + - interrupts : should contain the EHCI interrupt + +1.i) The Secure Digital Host Controller Interface (SDHCI) nodes + + Represent the Secure Digital Host Controller Interfaces. + + Required properties: + + - compatible : should be "nintendo,hollywood-sdhci","sdhci" + - reg : should contain the SDHCI registers location and length + - interrupts : should contain the SDHCI interrupt + +1.j) The Inter-Processsor Communication (IPC) node + + Represent the Inter-Processor Communication interface. This interface + enables communications between the Broadway and the Starlet processors. + + - compatible : should be "nintendo,hollywood-ipc" + - reg : should contain the IPC registers location and length + - interrupts : should contain the IPC interrupt + +1.k) The "Hollywood" interrupt controller node + + Represents the "Hollywood" interrupt controller within the + "Hollywood" chip. + + Required properties: + + - #interrupt-cells : <1> + - compatible : should be "nintendo,hollywood-pic" + - reg : should contain the controller registers location and length + - interrupt-controller + - interrupts : should contain the cascade interrupt of the "flipper" pic + - interrupt-parent: should contain the phandle of the "flipper" pic + +1.l) The General Purpose I/O (GPIO) controller node + + Represents the dual access 32 GPIO controller interface. + + Required properties: + + - #gpio-cells : <2> + - compatible : should be "nintendo,hollywood-gpio" + - reg : should contain the IPC registers location and length + - gpio-controller + +1.m) The control node + + Represents the control interface used to setup several miscellaneous + settings of the "Hollywood" chip like boot memory mappings, resets, + disk interface mode, etc. + + Required properties: + + - compatible : should be "nintendo,hollywood-control" + - reg : should contain the control registers location and length + +1.n) The Disk Interface (DI) node + + Represents the interface used to communicate with mass storage devices. + + Required properties: + + - compatible : should be "nintendo,hollywood-di" + - reg : should contain the DI registers location and length + - interrupts : should contain the DI interrupt + diff --git a/trunk/Documentation/thermal/sysfs-api.txt b/trunk/Documentation/thermal/sysfs-api.txt index a87dc277a5ca..cb3d15bc1aeb 100644 --- a/trunk/Documentation/thermal/sysfs-api.txt +++ b/trunk/Documentation/thermal/sysfs-api.txt @@ -206,6 +206,7 @@ passive passive trip point for the zone. Activation is done by polling with an interval of 1 second. Unit: millidegrees Celsius + Valid values: 0 (disabled) or greater than 1000 RW, Optional ***************************** diff --git a/trunk/Documentation/video4linux/gspca.txt b/trunk/Documentation/video4linux/gspca.txt index 319d9838e87e..1800a62cf135 100644 --- a/trunk/Documentation/video4linux/gspca.txt +++ b/trunk/Documentation/video4linux/gspca.txt @@ -12,6 +12,7 @@ m5602 0402:5602 ALi Video Camera Controller spca501 040a:0002 Kodak DVC-325 spca500 040a:0300 Kodak EZ200 zc3xx 041e:041e Creative WebCam Live! +ov519 041e:4003 Video Blaster WebCam Go Plus spca500 041e:400a Creative PC-CAM 300 sunplus 041e:400b Creative PC-CAM 600 sunplus 041e:4012 PC-Cam350 @@ -168,10 +169,14 @@ sunplus 055f:c650 Mustek MDC5500Z zc3xx 055f:d003 Mustek WCam300A zc3xx 055f:d004 Mustek WCam300 AN conex 0572:0041 Creative Notebook cx11646 +ov519 05a9:0511 Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera +ov519 05a9:0518 Creative WebCam ov519 05a9:0519 OV519 Microphone ov519 05a9:0530 OmniVision +ov519 05a9:2800 OmniVision SuperCAM ov519 05a9:4519 Webcam Classic ov519 05a9:8519 OmniVision +ov519 05a9:a511 D-Link USB Digital Video Camera ov519 05a9:a518 D-Link DSB-C310 Webcam sunplus 05da:1018 Digital Dream Enigma 1.3 stk014 05e1:0893 Syntek DV4000 @@ -187,7 +192,7 @@ ov534 06f8:3002 Hercules Blog Webcam ov534 06f8:3003 Hercules Dualpix HD Weblog sonixj 06f8:3004 Hercules Classic Silver sonixj 06f8:3008 Hercules Deluxe Optical Glass -pac7311 06f8:3009 Hercules Classic Link +pac7302 06f8:3009 Hercules Classic Link spca508 0733:0110 ViewQuest VQ110 spca501 0733:0401 Intel Create and Share spca501 0733:0402 ViewQuest M318B @@ -199,6 +204,7 @@ sunplus 0733:2221 Mercury Digital Pro 3.1p sunplus 0733:3261 Concord 3045 spca536a sunplus 0733:3281 Cyberpix S550V spca506 0734:043b 3DeMon USB Capture aka +ov519 0813:0002 Dual Mode USB Camera Plus spca500 084d:0003 D-Link DSC-350 spca500 08ca:0103 Aiptek PocketDV sunplus 08ca:0104 Aiptek PocketDVII 1.3 @@ -236,15 +242,15 @@ pac7311 093a:2603 Philips SPC 500 NC pac7311 093a:2608 Trust WB-3300p pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 pac7311 093a:260f SnakeCam -pac7311 093a:2620 Apollo AC-905 -pac7311 093a:2621 PAC731x -pac7311 093a:2622 Genius Eye 312 -pac7311 093a:2624 PAC7302 -pac7311 093a:2626 Labtec 2200 -pac7311 093a:2628 Genius iLook 300 -pac7311 093a:2629 Genious iSlim 300 -pac7311 093a:262a Webcam 300k -pac7311 093a:262c Philips SPC 230 NC +pac7302 093a:2620 Apollo AC-905 +pac7302 093a:2621 PAC731x +pac7302 093a:2622 Genius Eye 312 +pac7302 093a:2624 PAC7302 +pac7302 093a:2626 Labtec 2200 +pac7302 093a:2628 Genius iLook 300 +pac7302 093a:2629 Genious iSlim 300 +pac7302 093a:262a Webcam 300k +pac7302 093a:262c Philips SPC 230 NC jeilinj 0979:0280 Sakar 57379 zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 @@ -259,6 +265,7 @@ vc032x 0ac8:c002 Sony embedded vimicro vc032x 0ac8:c301 Samsung Q1 Ultra Premium spca508 0af9:0010 Hama USB Sightcam 100 spca508 0af9:0011 Hama USB Sightcam 100 +ov519 0b62:0059 iBOT2 Webcam sonixb 0c45:6001 Genius VideoCAM NB sonixb 0c45:6005 Microdia Sweex Mini Webcam sonixb 0c45:6007 Sonix sn9c101 + Tas5110D @@ -318,8 +325,10 @@ sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655) sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660) sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R) sunplus 0d64:0303 Sunplus FashionCam DXG +ov519 0e96:c001 TRUST 380 USB2 SPACEC@M etoms 102c:6151 Qcam Sangha CIF etoms 102c:6251 Qcam xxxxxx VGA +ov519 1046:9967 W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k @@ -332,7 +341,12 @@ spca501 1776:501c Arowana 300K CMOS Camera t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC pac207 2001:f115 D-Link DSB-C120 +sq905c 2770:9050 sq905c +sq905c 2770:905c DualCamera +sq905 2770:9120 Argus Digital Camera DC1512 +sq905c 2770:913d sq905c spca500 2899:012c Toptro Industrial +ov519 8020:ef04 ov519 spca508 8086:0110 Intel Easy PC Camera spca500 8086:0630 Intel Pocket PC Camera spca506 99fa:8988 Grandtec V.cap diff --git a/trunk/Documentation/video4linux/sh_mobile_ceu_camera.txt b/trunk/Documentation/video4linux/sh_mobile_ceu_camera.txt new file mode 100644 index 000000000000..2ae16349a78d --- /dev/null +++ b/trunk/Documentation/video4linux/sh_mobile_ceu_camera.txt @@ -0,0 +1,157 @@ + Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver + ======================================================================= + +Terminology +----------- + +sensor scales: horizontal and vertical scales, configured by the sensor driver +host scales: -"- host driver +combined scales: sensor_scale * host_scale + + +Generic scaling / cropping scheme +--------------------------------- + +-1-- +| +-2-- -\ +| --\ +| --\ ++-5-- -\ -- -3-- +| ---\ +| --- -4-- -\ +| -\ +| - -6-- +| +| - -6'- +| -/ +| --- -4'- -/ +| ---/ ++-5'- -/ +| -- -3'- +| --/ +| --/ +-2'- -/ +| +| +-1'- + +Produced by user requests: + +S_CROP(left / top = (5) - (1), width / height = (5') - (5)) +S_FMT(width / height = (6') - (6)) + +Here: + +(1) to (1') - whole max width or height +(1) to (2) - sensor cropped left or top +(2) to (2') - sensor cropped width or height +(3) to (3') - sensor scale +(3) to (4) - CEU cropped left or top +(4) to (4') - CEU cropped width or height +(5) to (5') - reverse sensor scale applied to CEU cropped width or height +(2) to (5) - reverse sensor scale applied to CEU cropped left or top +(6) to (6') - CEU scale - user window + + +S_FMT +----- + +Do not touch input rectangle - it is already optimal. + +1. Calculate current sensor scales: + + scale_s = ((3') - (3)) / ((2') - (2)) + +2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at +current sensor scales onto input window - this is user S_CROP: + + width_u = (5') - (5) = ((4') - (4)) * scale_s + +3. Calculate new combined scales from "effective" input window to requested user +window: + + scale_comb = width_u / ((6') - (6)) + +4. Calculate sensor output window by applying combined scales to real input +window: + + width_s_out = ((2') - (2)) / scale_comb + +5. Apply iterative sensor S_FMT for sensor output window. + + subdev->video_ops->s_fmt(.width = width_s_out) + +6. Retrieve sensor output window (g_fmt) + +7. Calculate new sensor scales: + + scale_s_new = ((3')_new - (3)_new) / ((2') - (2)) + +8. Calculate new CEU crop - apply sensor scales to previously calculated +"effective" crop: + + width_ceu = (4')_new - (4)_new = width_u / scale_s_new + left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new + +9. Use CEU cropping to crop to the new window: + + ceu_crop(.width = width_ceu, .left = left_ceu) + +10. Use CEU scaling to scale to the requested user window: + + scale_ceu = width_ceu / width + + +S_CROP +------ + +If old scale applied to new crop is invalid produce nearest new scale possible + +1. Calculate current combined scales. + + scale_comb = (((4') - (4)) / ((6') - (6))) * (((2') - (2)) / ((3') - (3))) + +2. Apply iterative sensor S_CROP for new input window. + +3. If old combined scales applied to new crop produce an impossible user window, +adjust scales to produce nearest possible window. + + width_u_out = ((5') - (5)) / scale_comb + + if (width_u_out > max) + scale_comb = ((5') - (5)) / max; + else if (width_u_out < min) + scale_comb = ((5') - (5)) / min; + +4. Issue G_CROP to retrieve actual input window. + +5. Using actual input window and calculated combined scales calculate sensor +target output window. + + width_s_out = ((3') - (3)) = ((2') - (2)) / scale_comb + +6. Apply iterative S_FMT for new sensor target output window. + +7. Issue G_FMT to retrieve the actual sensor output window. + +8. Calculate sensor scales. + + scale_s = ((3') - (3)) / ((2') - (2)) + +9. Calculate sensor output subwindow to be cropped on CEU by applying sensor +scales to the requested window. + + width_ceu = ((5') - (5)) / scale_s + +10. Use CEU cropping for above calculated window. + +11. Calculate CEU scales from sensor scales from results of (10) and user window +from (3) + + scale_ceu = calc_scale(((5') - (5)), &width_u_out) + +12. Apply CEU scales. + +-- +Author: Guennadi Liakhovetski diff --git a/trunk/Documentation/video4linux/v4l2-framework.txt b/trunk/Documentation/video4linux/v4l2-framework.txt index b806edaf3e75..74d677c8b036 100644 --- a/trunk/Documentation/video4linux/v4l2-framework.txt +++ b/trunk/Documentation/video4linux/v4l2-framework.txt @@ -561,6 +561,8 @@ video_device helper functions There are a few useful helper functions: +- file/video_device private data + You can set/get driver private data in the video_device struct using: void *video_get_drvdata(struct video_device *vdev); @@ -575,8 +577,7 @@ struct video_device *video_devdata(struct file *file); returns the video_device belonging to the file struct. -The final helper function combines video_get_drvdata with -video_devdata: +The video_drvdata function combines video_get_drvdata with video_devdata: void *video_drvdata(struct file *file); @@ -584,6 +585,17 @@ You can go from a video_device struct to the v4l2_device struct using: struct v4l2_device *v4l2_dev = vdev->v4l2_dev; +- Device node name + +The video_device node kernel name can be retrieved using + +const char *video_device_node_name(struct video_device *vdev); + +The name is used as a hint by userspace tools such as udev. The function +should be used where possible instead of accessing the video_device::num and +video_device::minor fields. + + video buffer helper functions ----------------------------- diff --git a/trunk/Documentation/vm/hwpoison.txt b/trunk/Documentation/vm/hwpoison.txt index 3ffadf8da61f..12f9ba20ccb7 100644 --- a/trunk/Documentation/vm/hwpoison.txt +++ b/trunk/Documentation/vm/hwpoison.txt @@ -92,16 +92,62 @@ PR_MCE_KILL_GET Testing: -madvise(MADV_POISON, ....) +madvise(MADV_HWPOISON, ....) (as root) Poison a page in the process for testing hwpoison-inject module through debugfs - /sys/debug/hwpoison/corrupt-pfn -Inject hwpoison fault at PFN echoed into this file +/sys/debug/hwpoison/ +corrupt-pfn + +Inject hwpoison fault at PFN echoed into this file. This does +some early filtering to avoid corrupted unintended pages in test suites. + +unpoison-pfn + +Software-unpoison page at PFN echoed into this file. This +way a page can be reused again. +This only works for Linux injected failures, not for real +memory failures. + +Note these injection interfaces are not stable and might change between +kernel versions + +corrupt-filter-dev-major +corrupt-filter-dev-minor + +Only handle memory failures to pages associated with the file system defined +by block device major/minor. -1U is the wildcard value. +This should be only used for testing with artificial injection. + +corrupt-filter-memcg + +Limit injection to pages owned by memgroup. Specified by inode number +of the memcg. + +Example: + mkdir /cgroup/hwpoison + + usemem -m 100 -s 1000 & + echo `jobs -p` > /cgroup/hwpoison/tasks + + memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ') + echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg + + page-types -p `pidof init` --hwpoison # shall do nothing + page-types -p `pidof usemem` --hwpoison # poison its pages + +corrupt-filter-flags-mask +corrupt-filter-flags-value + +When specified, only poison pages if ((page_flags & mask) == value). +This allows stress testing of many kinds of pages. The page_flags +are the same as in /proc/kpageflags. The flag bits are defined in +include/linux/kernel-page-flags.h and documented in +Documentation/vm/pagemap.txt Architecture specific MCE injector diff --git a/trunk/Documentation/vm/page-types.c b/trunk/Documentation/vm/page-types.c index 7a7d9bab32ef..66e9358e2144 100644 --- a/trunk/Documentation/vm/page-types.c +++ b/trunk/Documentation/vm/page-types.c @@ -1,11 +1,22 @@ /* * page-types: Tool for querying page flags * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should find a copy of v2 of the GNU General Public License somewhere on + * your Linux system; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * * Copyright (C) 2009 Intel corporation * * Authors: Wu Fengguang - * - * Released under the General Public License (GPL). */ #define _LARGEFILE64_SOURCE diff --git a/trunk/Kbuild b/trunk/Kbuild index f056b4feee51..e3737ad72b5a 100644 --- a/trunk/Kbuild +++ b/trunk/Kbuild @@ -8,7 +8,7 @@ ##### # 1) Generate bounds.h -bounds-file := include/linux/bounds.h +bounds-file := include/generated/bounds.h always := $(bounds-file) targets := $(bounds-file) kernel/bounds.s @@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild # 2) Generate asm-offsets.h # -offsets-file := include/asm/asm-offsets.h +offsets-file := include/generated/asm-offsets.h always += $(offsets-file) targets += $(offsets-file) diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 0a32c3ec6b1c..efd2ef2c2660 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -2377,6 +2377,15 @@ W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/ S: Maintained F: drivers/hwmon/hdaps.c +HWPOISON MEMORY FAILURE HANDLING +M: Andi Kleen +L: linux-mm@kvack.org +L: linux-kernel@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison +S: Maintained +F: mm/memory-failure.c +F: mm/hwpoison-inject.c + HYPERVISOR VIRTUAL CONSOLE DRIVER L: linuxppc-dev@ozlabs.org S: Odd Fixes @@ -5425,6 +5434,12 @@ F: drivers/uwb/* F: include/linux/uwb.h F: include/linux/uwb/ +UNIFDEF +M: Tony Finch +W: http://dotat.at/prog/unifdef +S: Maintained +F: scripts/unifdef.c + UNIFORM CDROM DRIVER M: Jens Axboe W: http://www.kernel.dk @@ -5991,9 +6006,9 @@ F: sound/soc/codecs/wm8350.* F: sound/soc/codecs/wm8400.* X.25 NETWORK LAYER -M: Henner Eisen +M: Andrew Hendry L: linux-x25@vger.kernel.org -S: Maintained +S: Odd Fixes F: Documentation/networking/x25* F: include/net/x25* F: net/x25/ diff --git a/trunk/Makefile b/trunk/Makefile index 33d4732a6c4a..0ac5812f3b6d 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 32 -EXTRAVERSION = +SUBLEVEL = 33 +EXTRAVERSION = -rc1 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* @@ -334,10 +334,9 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -LINUXINCLUDE := -Iinclude \ - $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ - -I$(srctree)/arch/$(hdr-arch)/include \ - -include include/linux/autoconf.h +LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ + -include include/generated/autoconf.h KBUILD_CPPFLAGS := -D__KERNEL__ @@ -465,7 +464,7 @@ ifeq ($(KBUILD_EXTMOD),) # Carefully list dependencies so we do not try to build scripts twice # in parallel PHONY += scripts -scripts: scripts_basic include/config/auto.conf +scripts: scripts_basic include/config/auto.conf include/config/tristate.conf $(Q)$(MAKE) $(build)=$(@) # Objects we will link into vmlinux / subdirs we need to visit @@ -492,18 +491,18 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; # with it and forgot to run make oldconfig. # if auto.conf.cmd is missing then we are probably in a cleaned tree so # we execute the config step to be sure to catch updated Kconfig files -include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd +include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else -# external modules needs include/linux/autoconf.h and include/config/auto.conf +# external modules needs include/generated/autoconf.h and include/config/auto.conf # but do not care if they are up-to-date. Use auto.conf to trigger the test PHONY += include/config/auto.conf include/config/auto.conf: - $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \ + $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ - echo " include/linux/autoconf.h or $@ are missing."; \ + echo " include/generated/autoconf.h or $@ are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) @@ -877,6 +876,9 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; PHONY += $(vmlinux-dirs) $(vmlinux-dirs): prepare scripts $(Q)$(MAKE) $(build)=$@ +ifdef CONFIG_MODULES + $(Q)$(MAKE) $(modbuiltin)=$@ +endif # Build the kernel release string # @@ -955,7 +957,6 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 # prepare3 is used to check if we are building in a separate output directory, # and if so do: # 1) Check that make has not been executed in the kernel src $(srctree) -# 2) Create the include2 directory, used for the second asm symlink prepare3: include/config/kernel.release ifneq ($(KBUILD_SRC),) @$(kecho) ' Using $(srctree) as source for kernel' @@ -964,17 +965,13 @@ ifneq ($(KBUILD_SRC),) echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then \ - mkdir -p include2; \ - ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ - fi endif # prepare2 creates a makefile if using a separate output directory prepare2: prepare3 outputmakefile -prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \ - include/asm include/config/auto.conf +prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ + include/config/auto.conf $(cmd_crmodverdir) archprepare: prepare1 scripts_basic @@ -986,42 +983,6 @@ prepare0: archprepare FORCE # All the preparing.. prepare: prepare0 -# The asm symlink changes when $(ARCH) changes. -# Detect this and ask user to run make mrproper -# If asm is a stale symlink (point to dir that does not exist) remove it -define check-symlink - set -e; \ - if [ -L include/asm ]; then \ - asmlink=`readlink include/asm | cut -d '-' -f 2`; \ - if [ "$$asmlink" != "$(SRCARCH)" ]; then \ - echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \ - echo " set ARCH or save .config and run 'make mrproper' to fix it"; \ - exit 1; \ - fi; \ - test -e $$asmlink || rm include/asm; \ - elif [ -d include/asm ]; then \ - echo "ERROR: $@ is a directory but a symlink was expected";\ - exit 1; \ - fi -endef - -# We create the target directory of the symlink if it does -# not exist so the test in check-symlink works and we have a -# directory for generated filesas used by some architectures. -define create-symlink - if [ ! -L include/asm ]; then \ - $(kecho) ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \ - if [ ! -d include/asm-$(SRCARCH) ]; then \ - mkdir -p include/asm-$(SRCARCH); \ - fi; \ - ln -fsn asm-$(SRCARCH) $@; \ - fi -endef - -include/asm: FORCE - $(Q)$(check-symlink) - $(Q)$(create-symlink) - # Generate some files # --------------------------------------------------------------------------- @@ -1046,7 +1007,7 @@ endef include/linux/version.h: $(srctree)/Makefile FORCE $(call filechk,version.h) -include/linux/utsrelease.h: include/config/kernel.release FORCE +include/generated/utsrelease.h: include/config/kernel.release FORCE $(call filechk,utsrelease.h) PHONY += headerdep @@ -1076,11 +1037,6 @@ firmware_install: FORCE export INSTALL_HDR_PATH = $(objtree)/usr hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj -# Find out where the Kbuild file is located to support -# arch/$(ARCH)/include/asm -hdr-dir = $(strip \ - $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \ - arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch))) # If we do an all arch process set dst to asm-$(hdr-arch) hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) @@ -1095,10 +1051,10 @@ headers_install_all: PHONY += headers_install headers_install: __headers - $(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \ + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \ $(error Headers not exportable for the $(SRCARCH) architecture)) $(Q)$(MAKE) $(hdr-inst)=include - $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all @@ -1107,7 +1063,7 @@ headers_check_all: headers_install_all PHONY += headers_check headers_check: headers_install $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1 - $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Modules @@ -1127,6 +1083,7 @@ all: modules PHONY += modules modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order + $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.builtin) > $(objtree)/modules.builtin @$(kecho) ' Building modules, stage 2.'; $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild @@ -1156,6 +1113,7 @@ _modinst_: ln -s $(objtree) $(MODLIB)/build ; \ fi @cp -f $(objtree)/modules.order $(MODLIB)/ + @cp -f $(objtree)/modules.builtin $(MODLIB)/ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst # This depmod is only for convenience to give the initial @@ -1194,12 +1152,10 @@ CLEAN_FILES += vmlinux System.map \ .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map # Directories & files removed with 'make mrproper' -MRPROPER_DIRS += include/config include2 usr/include include/generated -MRPROPER_FILES += .config .config.old include/asm .version .old_version \ - include/linux/autoconf.h include/linux/version.h \ - include/linux/utsrelease.h \ - include/linux/bounds.h include/asm*/asm-offsets.h \ - Module.symvers Module.markers tags TAGS cscope* +MRPROPER_DIRS += include/config usr/include include/generated +MRPROPER_FILES += .config .config.old .version .old_version \ + include/linux/version.h \ + Module.symvers tags TAGS cscope* # clean - Delete most, but leave enough to build external modules # @@ -1218,7 +1174,7 @@ clean: archclean $(clean-dirs) \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ - -o -name 'Module.markers' -o -name '.tmp_*.o.*' \ + -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f # mrproper - Delete all generated files, including .config @@ -1416,8 +1372,8 @@ $(clean-dirs): clean: rm-dirs := $(MODVERDIR) clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ - $(KBUILD_EXTMOD)/Module.markers \ - $(KBUILD_EXTMOD)/modules.order + $(KBUILD_EXTMOD)/modules.order \ + $(KBUILD_EXTMOD)/modules.builtin clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) diff --git a/trunk/arch/alpha/boot/bootp.c b/trunk/arch/alpha/boot/bootp.c index 3af21c789339..3c8d1b25c661 100644 --- a/trunk/arch/alpha/boot/bootp.c +++ b/trunk/arch/alpha/boot/bootp.c @@ -9,7 +9,7 @@ */ #include #include -#include +#include #include #include diff --git a/trunk/arch/alpha/boot/bootpz.c b/trunk/arch/alpha/boot/bootpz.c index 1036b515e20c..ade3f129dc27 100644 --- a/trunk/arch/alpha/boot/bootpz.c +++ b/trunk/arch/alpha/boot/bootpz.c @@ -11,7 +11,7 @@ */ #include #include -#include +#include #include #include diff --git a/trunk/arch/alpha/boot/main.c b/trunk/arch/alpha/boot/main.c index 89f3be071ae5..644b7db55438 100644 --- a/trunk/arch/alpha/boot/main.c +++ b/trunk/arch/alpha/boot/main.c @@ -7,7 +7,7 @@ */ #include #include -#include +#include #include #include diff --git a/trunk/arch/alpha/include/asm/asm-offsets.h b/trunk/arch/alpha/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/alpha/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/alpha/include/asm/elf.h b/trunk/arch/alpha/include/asm/elf.h index 5c75c1b2352a..9baae8afe8a3 100644 --- a/trunk/arch/alpha/include/asm/elf.h +++ b/trunk/arch/alpha/include/asm/elf.h @@ -81,7 +81,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define ELF_DATA ELFDATA2LSB #define ELF_ARCH EM_ALPHA -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 8192 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/trunk/arch/alpha/include/asm/fcntl.h b/trunk/arch/alpha/include/asm/fcntl.h index 21b1117a0c61..70145cbb21cb 100644 --- a/trunk/arch/alpha/include/asm/fcntl.h +++ b/trunk/arch/alpha/include/asm/fcntl.h @@ -16,7 +16,7 @@ #define O_NOATIME 04000000 #define O_CLOEXEC 010000000 /* set close_on_exec */ /* - * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using * the O_SYNC flag. We continue to use the existing numerical value * for O_DSYNC semantics now, but using the correct symbolic name for it. * This new value is used to request true Posix O_SYNC semantics. It is diff --git a/trunk/arch/arm/Makefile b/trunk/arch/arm/Makefile index fa0cdab2e1d3..e9da08483b3c 100644 --- a/trunk/arch/arm/Makefile +++ b/trunk/arch/arm/Makefile @@ -242,15 +242,8 @@ all: $(KBUILD_IMAGE) boot := arch/arm/boot -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch to indicate when they were updated -# last, otherwise make uses the target directory mtime. - -archprepare: maketools - -PHONY += maketools FORCE -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h +archprepare: + $(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h # Convert bzImage to zImage bzImage: zImage @@ -261,9 +254,6 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -CLEAN_FILES += include/asm-arm/mach-types.h \ - include/asm-arm/arch include/asm-arm/.arch - # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/trunk/arch/arm/common/dmabounce.c b/trunk/arch/arm/common/dmabounce.c index 5a375e5fef21..bc90364a96c7 100644 --- a/trunk/arch/arm/common/dmabounce.c +++ b/trunk/arch/arm/common/dmabounce.c @@ -308,15 +308,11 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, memcpy(ptr, buf->safe, size); /* - * DMA buffers must have the same cache properties - * as if they were really used for DMA - which means - * data must be written back to RAM. Note that - * we don't use dmac_flush_range() here for the - * bidirectional case because we know the cache - * lines will be coherent with the data written. + * Since we may have written to a page cache page, + * we need to ensure that the data will be coherent + * with user mappings. */ - dmac_clean_range(ptr, ptr + size); - outer_clean_range(__pa(ptr), __pa(ptr) + size); + __cpuc_flush_kernel_dcache_area(ptr, size); } free_safe_buffer(dev->archdata.dmabounce, buf); } diff --git a/trunk/arch/arm/include/asm/asm-offsets.h b/trunk/arch/arm/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/arm/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/arm/include/asm/cacheflush.h b/trunk/arch/arm/include/asm/cacheflush.h index 73eceb87e588..730aefcfbee3 100644 --- a/trunk/arch/arm/include/asm/cacheflush.h +++ b/trunk/arch/arm/include/asm/cacheflush.h @@ -211,7 +211,7 @@ struct cpu_cache_fns { void (*coherent_kern_range)(unsigned long, unsigned long); void (*coherent_user_range)(unsigned long, unsigned long); - void (*flush_kern_dcache_page)(void *); + void (*flush_kern_dcache_area)(void *, size_t); void (*dma_inv_range)(const void *, const void *); void (*dma_clean_range)(const void *, const void *); @@ -236,7 +236,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range cpu_cache.flush_user_range #define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range #define __cpuc_coherent_user_range cpu_cache.coherent_user_range -#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page +#define __cpuc_flush_dcache_area cpu_cache.flush_kern_dcache_area /* * These are private to the dma-mapping API. Do not use directly. @@ -255,14 +255,14 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) +#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); extern void __cpuc_coherent_user_range(unsigned long, unsigned long); -extern void __cpuc_flush_dcache_page(void *); +extern void __cpuc_flush_dcache_area(void *, size_t); /* * These are private to the dma-mapping API. Do not use directly. @@ -448,7 +448,7 @@ static inline void flush_kernel_dcache_page(struct page *page) { /* highmem pages are always flushed upon kunmap already */ if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } #define flush_dcache_mmap_lock(mapping) \ @@ -465,13 +465,6 @@ static inline void flush_kernel_dcache_page(struct page *page) */ #define flush_icache_page(vma,page) do { } while (0) -static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, - unsigned offset, size_t size) -{ - const void *start = (void __force *)virt + offset; - dmac_inv_range(start, start + size); -} - /* * flush_cache_vmap() is used when creating mappings (eg, via vmap, * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT diff --git a/trunk/arch/arm/include/asm/elf.h b/trunk/arch/arm/include/asm/elf.h index 6aac3f5bb2f3..a399bb5730f1 100644 --- a/trunk/arch/arm/include/asm/elf.h +++ b/trunk/arch/arm/include/asm/elf.h @@ -101,7 +101,6 @@ extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); #define ELF_CORE_COPY_TASK_REGS dump_task_regs -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/trunk/arch/arm/include/asm/mach-types.h b/trunk/arch/arm/include/asm/mach-types.h new file mode 100644 index 000000000000..948178cc6ba8 --- /dev/null +++ b/trunk/arch/arm/include/asm/mach-types.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/arm/kernel/armksyms.c b/trunk/arch/arm/kernel/armksyms.c index 0e627705f746..8214bfebfaca 100644 --- a/trunk/arch/arm/kernel/armksyms.c +++ b/trunk/arch/arm/kernel/armksyms.c @@ -48,27 +48,7 @@ extern void __aeabi_uidivmod(void); extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); -extern void fp_enter(void); -/* - * This has a special calling convention; it doesn't - * modify any of the usual registers, except for LR. - */ -#define EXPORT_CRC_ALIAS(sym) __CRC_SYMBOL(sym, "") - -#define EXPORT_SYMBOL_ALIAS(sym,orig) \ - EXPORT_CRC_ALIAS(sym) \ - static const struct kernel_symbol __ksymtab_##sym \ - __used __attribute__((section("__ksymtab"))) = \ - { (unsigned long)&orig, #sym }; - -/* - * floating point math emulator support. - * These symbols will never change their calling convention... - */ -EXPORT_SYMBOL_ALIAS(kern_fp_enter,fp_enter); -EXPORT_SYMBOL_ALIAS(fp_printk,printk); -EXPORT_SYMBOL_ALIAS(fp_send_sig,send_sig); EXPORT_SYMBOL(__backtrace); diff --git a/trunk/arch/arm/kernel/vmlinux.lds.S b/trunk/arch/arm/kernel/vmlinux.lds.S index 71151bd87a36..4957e13ef55b 100644 --- a/trunk/arch/arm/kernel/vmlinux.lds.S +++ b/trunk/arch/arm/kernel/vmlinux.lds.S @@ -65,11 +65,11 @@ SECTIONS __init_end = .; #endif - /DISCARD/ : { /* Exit code and data */ - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) + /* + * unwind exit sections must be discarded before the rest of the + * unwind sections get included. + */ + /DISCARD/ : { *(.ARM.exidx.exit.text) *(.ARM.extab.exit.text) #ifndef CONFIG_HOTPLUG_CPU @@ -238,6 +238,9 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } + + /* Default discards */ + DISCARDS } /* diff --git a/trunk/arch/arm/mach-bcmring/arch.c b/trunk/arch/arm/mach-bcmring/arch.c index fbe6fa02c882..53dd2a9eecf9 100644 --- a/trunk/arch/arm/mach-bcmring/arch.c +++ b/trunk/arch/arm/mach-bcmring/arch.c @@ -70,9 +70,19 @@ static struct ctl_table bcmring_sysctl_reboot[] = { {} }; +static struct resource nand_resource[] = { + [0] = { + .start = MM_ADDR_IO_NAND, + .end = MM_ADDR_IO_NAND + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device nand_device = { .name = "bcm-nand", .id = -1, + .resource = nand_resource, + .num_resources = ARRAY_SIZE(nand_resource), }; static struct platform_device *devices[] __initdata = { diff --git a/trunk/arch/arm/mach-bcmring/include/mach/reg_nand.h b/trunk/arch/arm/mach-bcmring/include/mach/reg_nand.h new file mode 100644 index 000000000000..387376ffb56b --- /dev/null +++ b/trunk/arch/arm/mach-bcmring/include/mach/reg_nand.h @@ -0,0 +1,66 @@ +/***************************************************************************** +* Copyright 2001 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_NAND.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_NAND_H) +#define __ASM_ARCH_REG_NAND_H + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ + +#define HW_NAND_BASE MM_IO_BASE_NAND /* NAND Flash */ + +/* DMA accesses by the bootstrap need hard nonvirtual addresses */ +#define REG_NAND_CMD __REG16(HW_NAND_BASE + 0) +#define REG_NAND_ADDR __REG16(HW_NAND_BASE + 4) + +#define REG_NAND_PHYS_DATA16 (HW_NAND_BASE + 8) +#define REG_NAND_PHYS_DATA8 (HW_NAND_BASE + 8) +#define REG_NAND_DATA16 __REG16(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8 __REG8(REG_NAND_PHYS_DATA8) + +/* use appropriate offset to make sure it start at the 1K boundary */ +#define REG_NAND_PHYS_DATA_DMA (HW_NAND_BASE + 0x400) +#define REG_NAND_DATA_DMA __REG32(REG_NAND_PHYS_DATA_DMA) + +/* Linux DMA requires physical address of the data register */ +#define REG_NAND_DATA16_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8) +#define REG_NAND_DATA_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA) + +#define NAND_BUS_16BIT() (0) +#define NAND_BUS_8BIT() (!NAND_BUS_16BIT()) + +/* Register offsets */ +#define REG_NAND_CMD_OFFSET (0) +#define REG_NAND_ADDR_OFFSET (4) +#define REG_NAND_DATA8_OFFSET (8) + +#endif diff --git a/trunk/arch/arm/mach-bcmring/include/mach/reg_umi.h b/trunk/arch/arm/mach-bcmring/include/mach/reg_umi.h new file mode 100644 index 000000000000..06a355481ea6 --- /dev/null +++ b/trunk/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -0,0 +1,237 @@ +/***************************************************************************** +* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_UMI.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_UMI_H) +#define __ASM_ARCH_REG_UMI_H + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ + +/* Unified Memory Interface Ctrl Register */ +#define HW_UMI_BASE MM_IO_BASE_UMI + +/* Flash bank 0 timing and control register */ +#define REG_UMI_FLASH0_TCR __REG32(HW_UMI_BASE + 0x00) +/* Flash bank 1 timing and control register */ +#define REG_UMI_FLASH1_TCR __REG32(HW_UMI_BASE + 0x04) +/* Flash bank 2 timing and control register */ +#define REG_UMI_FLASH2_TCR __REG32(HW_UMI_BASE + 0x08) +/* MMD interface and control register */ +#define REG_UMI_MMD_ICR __REG32(HW_UMI_BASE + 0x0c) +/* NAND timing and control register */ +#define REG_UMI_NAND_TCR __REG32(HW_UMI_BASE + 0x18) +/* NAND ready/chip select register */ +#define REG_UMI_NAND_RCSR __REG32(HW_UMI_BASE + 0x1c) +/* NAND ECC control & status register */ +#define REG_UMI_NAND_ECC_CSR __REG32(HW_UMI_BASE + 0x20) +/* NAND ECC data register XXB2B1B0 */ +#define REG_UMI_NAND_ECC_DATA __REG32(HW_UMI_BASE + 0x24) +/* BCH ECC Parameter N */ +#define REG_UMI_BCH_N __REG32(HW_UMI_BASE + 0x40) +/* BCH ECC Parameter T */ +#define REG_UMI_BCH_K __REG32(HW_UMI_BASE + 0x44) +/* BCH ECC Parameter K */ +#define REG_UMI_BCH_T __REG32(HW_UMI_BASE + 0x48) +/* BCH ECC Contro Status */ +#define REG_UMI_BCH_CTRL_STATUS __REG32(HW_UMI_BASE + 0x4C) +/* BCH WR ECC 31:0 */ +#define REG_UMI_BCH_WR_ECC_0 __REG32(HW_UMI_BASE + 0x50) +/* BCH WR ECC 63:32 */ +#define REG_UMI_BCH_WR_ECC_1 __REG32(HW_UMI_BASE + 0x54) +/* BCH WR ECC 95:64 */ +#define REG_UMI_BCH_WR_ECC_2 __REG32(HW_UMI_BASE + 0x58) +/* BCH WR ECC 127:96 */ +#define REG_UMI_BCH_WR_ECC_3 __REG32(HW_UMI_BASE + 0x5c) +/* BCH WR ECC 155:128 */ +#define REG_UMI_BCH_WR_ECC_4 __REG32(HW_UMI_BASE + 0x60) +/* BCH Read Error Location 1,0 */ +#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE + 0x64) +/* BCH Read Error Location 3,2 */ +#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE + 0x68) +/* BCH Read Error Location 5,4 */ +#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE + 0x6c) +/* BCH Read Error Location 7,6 */ +#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE + 0x70) +/* BCH Read Error Location 9,8 */ +#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE + 0x74) +/* BCH Read Error Location 11,10 */ +#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE + 0x78) + +/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ +/* Enable wait pin during burst write or read */ +#define REG_UMI_TCR_WAITEN 0x80000000 +/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +#define REG_UMI_TCR_LOWFREQ 0x40000000 +/* 1=synch write, 0=async write */ +#define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 +/* 1=synch read, 0=async read */ +#define REG_UMI_TCR_MEMTYPE_SYNCREAD 0x10000000 +/* 1=page mode read, 0=normal mode read */ +#define REG_UMI_TCR_MEMTYPE_PAGEREAD 0x08000000 +/* page size/burst size (wrap only) */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK 0x07000000 +/* 4 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_4 0x00000000 +/* 8 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_8 0x01000000 +/* 16 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_16 0x02000000 +/* 32 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_32 0x03000000 +/* 64 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_64 0x04000000 +/* 128 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_128 0x05000000 +/* 256 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_256 0x06000000 +/* 512 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_512 0x07000000 +/* Page read access cycle / Burst write latency (n+2 / n+1) */ +#define REG_UMI_TCR_TPRC_TWLC_MASK 0x00f80000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_TCR_TOE_MASK 0x00000060 +/* Read access cycle / Burst read latency (n+2 / n+1) */ +#define REG_UMI_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_MMD_ICR bits */ +/* Flash write protection pin control */ +#define REG_UMI_MMD_ICR_FLASH_WP 0x8000 +/* Extend hold time for sram0, sram1 csn (39 MHz operation) */ +#define REG_UMI_MMD_ICR_XHCS 0x4000 +/* Enable SDRAM 2 interface control */ +#define REG_UMI_MMD_ICR_SDRAM2EN 0x2000 +/* Enable merge of flash banks 0/1 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_INST512 0x1000 +/* Enable merge of flash banks 1/2 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_DATA512 0x0800 +/* Enable SDRAM interface control */ +#define REG_UMI_MMD_ICR_SDRAMEN 0x0400 +/* Polarity of busy state of Burst Wait Signal */ +#define REG_UMI_MMD_ICR_WAITPOL 0x0200 +/* Enable burst clock stopped when not accessing external burst flash/sram */ +#define REG_UMI_MMD_ICR_BCLKSTOP 0x0100 +/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */ +#define REG_UMI_MMD_ICR_PERI1EN 0x0080 +/* Enable the peri2_csn to replace sdram_csn */ +#define REG_UMI_MMD_ICR_PERI2EN 0x0040 +/* Enable the peri3_csn to replace sdram2_csn */ +#define REG_UMI_MMD_ICR_PERI3EN 0x0020 +/* Enable sram bank1 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB1 0x0010 +/* Enable sram bank0 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB0 0x0008 +/* Polarity for assert3ed state of H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSPOL 0x0004 +/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */ +/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */ +#define REG_UMI_MMD_ICR_MRSMODE 0x0002 +/* MRS state for S/W controlled mode */ +#define REG_UMI_MMD_ICR_MRSSTATE 0x0001 + +/* REG_UMI_NAND_TCR bits */ +/* Enable software to control CS */ +#define REG_UMI_NAND_TCR_CS_SWCTRL 0x80000000 +/* 16-bit nand wordsize if set */ +#define REG_UMI_NAND_TCR_WORD16 0x40000000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_NAND_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_NAND_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_NAND_TCR_TOE_MASK 0x00000060 +/* Read access cycle (n+2) */ +#define REG_UMI_NAND_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_NAND_RCSR bits */ +/* Status: Ready=1, Busy=0 */ +#define REG_UMI_NAND_RCSR_RDY 0x02 +/* Keep CS asserted during operation */ +#define REG_UMI_NAND_RCSR_CS_ASSERTED 0x01 + +/* REG_UMI_NAND_ECC_CSR bits */ +/* Interrupt status - read-only */ +#define REG_UMI_NAND_ECC_CSR_NANDINT 0x80000000 +/* Read: Status of ECC done, Write: clear ECC interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW 0x00800000 +/* Read: Status of R/B, Write: clear R/B interrupt */ +#define REG_UMI_NAND_ECC_CSR_RBINT_RAW 0x00400000 +/* 1 = Enable ECC Interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE 0x00008000 +/* 1 = Assert interrupt at rising edge of R/B_ */ +#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE 0x00004000 +/* Calculate ECC by 0=512 bytes, 1=256 bytes */ +#define REG_UMI_NAND_ECC_CSR_256BYTE 0x00000080 +/* Enable ECC in hardware */ +#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE 0x00000001 + +/* REG_UMI_BCH_CTRL_STATUS bits */ +/* Shift to Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20 +/* Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000 +/* Indicate Errors detected during read but uncorrectable */ +#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR 0x00080000 +/* Indicate Errors detected during read and are correctable */ +#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR 0x00040000 +/* Flag indicates BCH's ECC status of read process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID 0x00020000 +/* Flag indicates BCH's ECC status of write process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID 0x00010000 +/* Pause ECC calculation */ +#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010 +/* Enable Interrupt */ +#define REG_UMI_BCH_CTRL_STATUS_INT_EN 0x00000004 +/* Enable ECC during read */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN 0x00000002 +/* Enable ECC during write */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN 0x00000001 +/* Mask for location */ +#define REG_UMI_BCH_ERR_LOC_MASK 0x00001FFF +/* location within a byte */ +#define REG_UMI_BCH_ERR_LOC_BYTE 0x00000007 +/* location within a word */ +#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 +/* location within a page (512 byte) */ +#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 +#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) +#endif diff --git a/trunk/arch/arm/mach-davinci/board-da850-evm.c b/trunk/arch/arm/mach-davinci/board-da850-evm.c index 62b98bffc158..07de8db14581 100644 --- a/trunk/arch/arm/mach-davinci/board-da850-evm.c +++ b/trunk/arch/arm/mach-davinci/board-da850-evm.c @@ -339,6 +339,15 @@ static struct davinci_mmc_config da850_mmc_config = { .version = MMC_CTLR_VERSION_2, }; +static void da850_panel_power_ctrl(int val) +{ + /* lcd backlight */ + gpio_set_value(DA850_LCD_BL_PIN, val); + + /* lcd power */ + gpio_set_value(DA850_LCD_PWR_PIN, val); +} + static int da850_lcd_hw_init(void) { int status; @@ -356,17 +365,11 @@ static int da850_lcd_hw_init(void) gpio_direction_output(DA850_LCD_BL_PIN, 0); gpio_direction_output(DA850_LCD_PWR_PIN, 0); - /* disable lcd backlight */ - gpio_set_value(DA850_LCD_BL_PIN, 0); - - /* disable lcd power */ - gpio_set_value(DA850_LCD_PWR_PIN, 0); - - /* enable lcd power */ - gpio_set_value(DA850_LCD_PWR_PIN, 1); + /* Switch off panel power and backlight */ + da850_panel_power_ctrl(0); - /* enable lcd backlight */ - gpio_set_value(DA850_LCD_BL_PIN, 1); + /* Switch on panel power and backlight */ + da850_panel_power_ctrl(1); return 0; } @@ -674,6 +677,7 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: lcd initialization failed: %d\n", ret); + sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl, ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); if (ret) pr_warning("da850_evm_init: lcdc registration failed: %d\n", diff --git a/trunk/arch/arm/mach-davinci/include/mach/nand.h b/trunk/arch/arm/mach-davinci/include/mach/nand.h index b520c4b5678a..b2ad8090bd10 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/nand.h +++ b/trunk/arch/arm/mach-davinci/include/mach/nand.h @@ -79,6 +79,10 @@ struct davinci_nand_pdata { /* platform_data */ /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ unsigned options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; }; #endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h index 83f31cd0a274..62d17421e48c 100644 --- a/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h +++ b/trunk/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h @@ -5,9 +5,6 @@ #ifndef __ASM_ARCH_EP93XX_KEYPAD_H #define __ASM_ARCH_EP93XX_KEYPAD_H -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) - /* flags for the ep93xx_keypad driver */ #define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ #define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ @@ -18,8 +15,6 @@ /** * struct ep93xx_keypad_platform_data - platform specific device structure - * @matrix_key_rows: number of rows in the keypad matrix - * @matrix_key_cols: number of columns in the keypad matrix * @matrix_key_map: array of keycodes defining the keypad matrix * @matrix_key_map_size: ARRAY_SIZE(matrix_key_map) * @debounce: debounce start count; terminal count is 0xff @@ -27,8 +22,6 @@ * @flags: see above */ struct ep93xx_keypad_platform_data { - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; unsigned int *matrix_key_map; int matrix_key_map_size; unsigned int debounce; @@ -36,7 +29,7 @@ struct ep93xx_keypad_platform_data { unsigned int flags; }; -/* macro for creating the matrix_key_map table */ -#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) +#define EP93XX_MATRIX_ROWS (8) +#define EP93XX_MATRIX_COLS (8) #endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ diff --git a/trunk/arch/arm/mach-kirkwood/Kconfig b/trunk/arch/arm/mach-kirkwood/Kconfig index 8bf09ae5b347..f6c6196a51fa 100644 --- a/trunk/arch/arm/mach-kirkwood/Kconfig +++ b/trunk/arch/arm/mach-kirkwood/Kconfig @@ -52,6 +52,12 @@ config MACH_OPENRD_BASE Say 'Y' here if you want your kernel to support the Marvell OpenRD Base Board. +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space v2 NAS. + endmenu endif diff --git a/trunk/arch/arm/mach-kirkwood/Makefile b/trunk/arch/arm/mach-kirkwood/Makefile index 9f2f67b2b63d..d4d7f53b0fb9 100644 --- a/trunk/arch/arm/mach-kirkwood/Makefile +++ b/trunk/arch/arm/mach-kirkwood/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/trunk/arch/arm/mach-kirkwood/netspace_v2-setup.c b/trunk/arch/arm/mach-kirkwood/netspace_v2-setup.c new file mode 100644 index 000000000000..9a064065bebe --- /dev/null +++ b/trunk/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-kirkwood/netspace_v2-setup.c + * + * LaCie Network Space v2 board setup + * + * Copyright (C) 2009 Simon Guinot + * Copyright (C) 2009 Benoît Canet + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition netspace_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data netspace_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = netspace_v2_flash_parts, + .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), +}; + +static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &netspace_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netspace_v2_sata_data = { + .n_ports = 2, +}; + +#define NETSPACE_V2_GPIO_SATA0_POWER 16 +#define NETSPACE_V2_GPIO_SATA1_POWER 17 + +static void __init netspace_v2_sata_power_init(void) +{ + int err; + + err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); + if (err == 0) { + err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); + if (err) + gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); + } + if (err) + pr_err("netspace_v2: failed to setup SATA0 power\n"); +} + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETSPACE_V2_PUSH_BUTTON 32 + +static struct gpio_keys_button netspace_v2_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = NETSPACE_V2_PUSH_BUTTON, + .desc = "Power push button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data netspace_v2_button_data = { + .buttons = netspace_v2_buttons, + .nbuttons = ARRAY_SIZE(netspace_v2_buttons), +}; + +static struct platform_device netspace_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netspace_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The blue front LED is wired to a CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * cmd_led | slow_led | /SATA active | LED state + * | | | + * 1 | 0 | x | off + * - | 1 | x | on + * 0 | 0 | 1 | on + * 0 | 0 | 0 | blink (rate 300ms) + */ + +#define NETSPACE_V2_GPIO_RED_LED 12 +#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 +#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 + + +static struct gpio_led netspace_v2_gpio_led_pins[] = { + { + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), + .leds = netspace_v2_gpio_led_pins, +}; + +static struct platform_device netspace_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &netspace_v2_gpio_leds_data, + }, +}; + +static void __init netspace_v2_gpio_leds_init(void) +{ + platform_device_register(&netspace_v2_gpio_leds); + + /* + * Configure the front blue LED to blink in relation with the SATA + * activity. + */ + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, + "SATA blue LED slow") != 0) + return; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0) + goto err_free_1; + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD, + "SATA blue LED command") != 0) + goto err_free_1; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0) + goto err_free_2; + + return; + +err_free_2: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD); +err_free_1: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); + pr_err("netspace_v2: failed to configure SATA blue LED\n"); +} + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void netspace_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer netspace_v2_timer = { + .init = netspace_v2_timer_init, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int netspace_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + 0 +}; + +#define NETSPACE_V2_GPIO_POWER_OFF 31 + +static void netspace_v2_power_off(void) +{ + gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); +} + +static void __init netspace_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(netspace_v2_mpp_config); + + netspace_v2_sata_power_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netspace_v2_ge00_data); + kirkwood_sata_init(&netspace_v2_sata_data); + kirkwood_uart0_init(); + spi_register_board_info(netspace_v2_spi_slave_info, + ARRAY_SIZE(netspace_v2_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, netspace_v2_i2c_info, + ARRAY_SIZE(netspace_v2_i2c_info)); + + netspace_v2_gpio_leds_init(); + platform_device_register(&netspace_v2_gpio_buttons); + + if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netspace_v2_power_off; + else + pr_err("netspace_v2: failed to configure power-off GPIO\n"); +} + +MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netspace_v2_timer, +MACHINE_END diff --git a/trunk/arch/arm/mach-nomadik/board-nhk8815.c b/trunk/arch/arm/mach-nomadik/board-nhk8815.c index 116394484e71..9438bf6613a3 100644 --- a/trunk/arch/arm/mach-nomadik/board-nhk8815.c +++ b/trunk/arch/arm/mach-nomadik/board-nhk8815.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -149,7 +150,7 @@ static struct mtd_partition nhk8815_onenand_partitions[] = { } }; -static struct flash_platform_data nhk8815_onenand_data = { +static struct onenand_platform_data nhk8815_onenand_data = { .parts = nhk8815_onenand_partitions, .nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions), }; @@ -163,7 +164,7 @@ static struct resource nhk8815_onenand_resource[] = { }; static struct platform_device nhk8815_onenand_device = { - .name = "onenand", + .name = "onenand-flash", .id = -1, .dev = { .platform_data = &nhk8815_onenand_data, @@ -174,10 +175,10 @@ static struct platform_device nhk8815_onenand_device = { static void __init nhk8815_onenand_init(void) { -#ifdef CONFIG_ONENAND +#ifdef CONFIG_MTD_ONENAND /* Set up SMCS0 for OneNand */ - writel(0x000030db, FSMC_BCR0); - writel(0x02100551, FSMC_BTR0); + writel(0x000030db, FSMC_BCR(0)); + writel(0x02100551, FSMC_BTR(0)); #endif } diff --git a/trunk/arch/arm/mach-omap2/Kconfig b/trunk/arch/arm/mach-omap2/Kconfig index 76c11ee113e9..10eafa70a909 100644 --- a/trunk/arch/arm/mach-omap2/Kconfig +++ b/trunk/arch/arm/mach-omap2/Kconfig @@ -18,6 +18,7 @@ config ARCH_OMAP2430 config ARCH_OMAP34XX bool "OMAP34xx Based System" depends on ARCH_OMAP3 + select USB_ARCH_HAS_EHCI config ARCH_OMAP3430 bool "OMAP3430 support" diff --git a/trunk/arch/arm/mach-omap2/board-cm-t35.c b/trunk/arch/arm/mach-omap2/board-cm-t35.c index 1591aae64500..2626a9f8a73a 100644 --- a/trunk/arch/arm/mach-omap2/board-cm-t35.c +++ b/trunk/arch/arm/mach-omap2/board-cm-t35.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-igep0020.c b/trunk/arch/arm/mach-omap2/board-igep0020.c index 44239e3ec02e..117b8fd7e3a6 100644 --- a/trunk/arch/arm/mach-omap2/board-igep0020.c +++ b/trunk/arch/arm/mach-omap2/board-igep0020.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-omap3evm.c b/trunk/arch/arm/mach-omap2/board-omap3evm.c index 18913e96e34d..34de17851572 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3evm.c +++ b/trunk/arch/arm/mach-omap2/board-omap3evm.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-omap3touchbook.c b/trunk/arch/arm/mach-omap2/board-omap3touchbook.c index c9e5ebb4d91d..fe3d22cb2457 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/trunk/arch/arm/mach-omap2/board-omap3touchbook.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c b/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c index 17f3c91231db..acafdbc8aa16 100644 --- a/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c b/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c index 258794db488f..8dd277c36661 100755 --- a/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap2/serial.c b/trunk/arch/arm/mach-omap2/serial.c index 39b797bc14d6..19805a7de06c 100644 --- a/trunk/arch/arm/mach-omap2/serial.c +++ b/trunk/arch/arm/mach-omap2/serial.c @@ -640,12 +640,9 @@ void __init omap_serial_early_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add_tail(&uart->node, &uart_list); if (cpu_is_omap44xx()) p->irq += 32; - - omap_uart_enable_clocks(uart); } } @@ -673,9 +670,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); omap_uart_idle_init(uart); + list_add_tail(&uart->node, &uart_list); + if (WARN_ON(platform_device_register(pdev))) return; diff --git a/trunk/arch/arm/mach-pxa/Kconfig b/trunk/arch/arm/mach-pxa/Kconfig index e6d8e10ae5d1..8a0837ea0294 100644 --- a/trunk/arch/arm/mach-pxa/Kconfig +++ b/trunk/arch/arm/mach-pxa/Kconfig @@ -110,6 +110,8 @@ config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 + select CPU_PXA310 + select HAVE_PWM config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" @@ -240,7 +242,6 @@ config MACH_COLIBRI300 select PXA3xx select CPU_PXA300 select CPU_PXA310 - select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320" diff --git a/trunk/arch/arm/mach-pxa/devices.c b/trunk/arch/arm/mach-pxa/devices.c index 3395463bb5a6..8e10db148f1b 100644 --- a/trunk/arch/arm/mach-pxa/devices.c +++ b/trunk/arch/arm/mach-pxa/devices.c @@ -4,7 +4,6 @@ #include #include -#include #include #include #include @@ -14,6 +13,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-s3c2410/include/mach/spi.h b/trunk/arch/arm/mach-s3c2410/include/mach/spi.h index 193b39d654ed..4d9588373aa5 100644 --- a/trunk/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/trunk/arch/arm/mach-s3c2410/include/mach/spi.h @@ -18,6 +18,8 @@ struct s3c2410_spi_info { unsigned int num_cs; /* total chipselects */ int bus_num; /* bus number to use. */ + unsigned int use_fiq:1; /* use fiq */ + void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; diff --git a/trunk/arch/arm/mach-u300/include/mach/coh901318.h b/trunk/arch/arm/mach-u300/include/mach/coh901318.h new file mode 100644 index 000000000000..f4cfee9c7d28 --- /dev/null +++ b/trunk/arch/arm/mach-u300/include/mach/coh901318.h @@ -0,0 +1,281 @@ +/* + * + * include/linux/coh901318.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + * DMA driver for COH 901 318 + * Author: Per Friden + */ + +#ifndef COH901318_H +#define COH901318_H + +#include +#include + +#define MAX_DMA_PACKET_SIZE_SHIFT 11 +#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT) + +/** + * struct coh901318_lli - linked list item for DMAC + * @control: control settings for DMAC + * @src_addr: transfer source address + * @dst_addr: transfer destination address + * @link_addr: physical address to next lli + * @virt_link_addr: virtual addres of next lli (only used by pool_free) + * @phy_this: physical address of current lli (only used by pool_free) + */ +struct coh901318_lli { + u32 control; + dma_addr_t src_addr; + dma_addr_t dst_addr; + dma_addr_t link_addr; + + void *virt_link_addr; + dma_addr_t phy_this; +}; +/** + * struct coh901318_params - parameters for DMAC configuration + * @config: DMA config register + * @ctrl_lli_last: DMA control register for the last lli in the list + * @ctrl_lli: DMA control register for an lli + * @ctrl_lli_chained: DMA control register for a chained lli + */ +struct coh901318_params { + u32 config; + u32 ctrl_lli_last; + u32 ctrl_lli; + u32 ctrl_lli_chained; +}; +/** + * struct coh_dma_channel - dma channel base + * @name: ascii name of dma channel + * @number: channel id number + * @desc_nbr_max: number of preallocated descriptortors + * @priority_high: prio of channel, 0 low otherwise high. + * @param: configuration parameters + * @dev_addr: physical address of periphal connected to channel + */ +struct coh_dma_channel { + const char name[32]; + const int number; + const int desc_nbr_max; + const int priority_high; + const struct coh901318_params param; + const dma_addr_t dev_addr; +}; + +/** + * dma_access_memory_state_t - register dma for memory access + * + * @dev: The dma device + * @active: 1 means dma intends to access memory + * 0 means dma wont access memory + */ +typedef void (*dma_access_memory_state_t)(struct device *dev, + bool active); + +/** + * struct powersave - DMA power save structure + * @lock: lock protecting data in this struct + * @started_channels: bit mask indicating active dma channels + */ +struct powersave { + spinlock_t lock; + u64 started_channels; +}; +/** + * struct coh901318_platform - platform arch structure + * @chans_slave: specifying dma slave channels + * @chans_memcpy: specifying dma memcpy channels + * @access_memory_state: requesting DMA memeory access (on / off) + * @chan_conf: dma channel configurations + * @max_channels: max number of dma chanenls + */ +struct coh901318_platform { + const int *chans_slave; + const int *chans_memcpy; + const dma_access_memory_state_t access_memory_state; + const struct coh_dma_channel *chan_conf; + const int max_channels; +}; + +/** + * coh901318_get_bytes_left() - Get number of bytes left on a current transfer + * @chan: dma channel handle + * return number of bytes left, or negative on error + */ +u32 coh901318_get_bytes_left(struct dma_chan *chan); + +/** + * coh901318_stop() - Stops dma transfer + * @chan: dma channel handle + * return 0 on success otherwise negative value + */ +void coh901318_stop(struct dma_chan *chan); + +/** + * coh901318_continue() - Resumes a stopped dma transfer + * @chan: dma channel handle + * return 0 on success otherwise negative value + */ +void coh901318_continue(struct dma_chan *chan); + +/** + * coh901318_filter_id() - DMA channel filter function + * @chan: dma channel handle + * @chan_id: id of dma channel to be filter out + * + * In dma_request_channel() it specifies what channel id to be requested + */ +bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); + +/* + * DMA Controller - this access the static mappings of the coh901318 dma. + * + */ + +#define COH901318_MOD32_MASK (0x1F) +#define COH901318_WORD_MASK (0xFFFFFFFF) +/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */ +#define COH901318_INT_STATUS1 (0x0000) +#define COH901318_INT_STATUS2 (0x0004) +/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */ +#define COH901318_TC_INT_STATUS1 (0x0008) +#define COH901318_TC_INT_STATUS2 (0x000C) +/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */ +#define COH901318_TC_INT_CLEAR1 (0x0010) +#define COH901318_TC_INT_CLEAR2 (0x0014) +/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ +#define COH901318_RAW_TC_INT_STATUS1 (0x0018) +#define COH901318_RAW_TC_INT_STATUS2 (0x001C) +/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */ +#define COH901318_BE_INT_STATUS1 (0x0020) +#define COH901318_BE_INT_STATUS2 (0x0024) +/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */ +#define COH901318_BE_INT_CLEAR1 (0x0028) +#define COH901318_BE_INT_CLEAR2 (0x002C) +/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ +#define COH901318_RAW_BE_INT_STATUS1 (0x0030) +#define COH901318_RAW_BE_INT_STATUS2 (0x0034) + +/* + * CX_CFG - Channel Configuration Registers 32bit (R/W) + */ +#define COH901318_CX_CFG (0x0100) +#define COH901318_CX_CFG_SPACING (0x04) +/* Channel enable activates tha dma job */ +#define COH901318_CX_CFG_CH_ENABLE (0x00000001) +#define COH901318_CX_CFG_CH_DISABLE (0x00000000) +/* Request Mode */ +#define COH901318_CX_CFG_RM_MASK (0x00000006) +#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1) +#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1) +#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1) +#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1) +#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1) +/* Linked channel request field. RM must == 11 */ +#define COH901318_CX_CFG_LCRF_SHIFT 3 +#define COH901318_CX_CFG_LCRF_MASK (0x000001F8) +#define COH901318_CX_CFG_LCR_DISABLE (0x00000000) +/* Terminal Counter Interrupt Request Mask */ +#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200) +#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000) +/* Bus Error interrupt Mask */ +#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400) +#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000) + +/* + * CX_STAT - Channel Status Registers 32bit (R/-) + */ +#define COH901318_CX_STAT (0x0200) +#define COH901318_CX_STAT_SPACING (0x04) +#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008) +#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004) +#define COH901318_CX_STAT_ACTIVE (0x00000002) +#define COH901318_CX_STAT_ENABLED (0x00000001) + +/* + * CX_CTRL - Channel Control Registers 32bit (R/W) + */ +#define COH901318_CX_CTRL (0x0400) +#define COH901318_CX_CTRL_SPACING (0x10) +/* Transfer Count Enable */ +#define COH901318_CX_CTRL_TC_ENABLE (0x00001000) +#define COH901318_CX_CTRL_TC_DISABLE (0x00000000) +/* Transfer Count Value 0 - 4095 */ +#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF) +/* Burst count */ +#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000) +#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13) +/* Source bus size */ +#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000) +#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16) +#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16) +#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16) +/* Source address increment */ +#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000) +#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000) +/* Destination Bus Size */ +#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000) +#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19) +#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19) +#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19) +/* Destination address increment */ +#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000) +#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000) +/* Master Mode (Master2 is only connected to MSL) */ +#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000) +#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22) +#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22) +#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22) +#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22) +/* Terminal Count flag to PER enable */ +#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000) +#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000) +/* Terminal Count flags to CPU enable */ +#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000) +#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000) +/* Hand shake to peripheral */ +#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000) +#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000) +#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000) +#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000) +/* DMA mode */ +#define COH901318_CX_CTRL_DDMA_MASK (0x30000000) +#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28) +#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28) +#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28) +/* Primary Request Data Destination */ +#define COH901318_CX_CTRL_PRDD_MASK (0x40000000) +#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30) +#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30) + +/* + * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W) + */ +#define COH901318_CX_SRC_ADDR (0x0404) +#define COH901318_CX_SRC_ADDR_SPACING (0x10) + +/* + * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W + */ +#define COH901318_CX_DST_ADDR (0x0408) +#define COH901318_CX_DST_ADDR_SPACING (0x10) + +/* + * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W) + */ +#define COH901318_CX_LNK_ADDR (0x040C) +#define COH901318_CX_LNK_ADDR_SPACING (0x10) +#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001) +#endif /* COH901318_H */ diff --git a/trunk/arch/arm/mm/cache-fa.S b/trunk/arch/arm/mm/cache-fa.S index b63a8f7b95cf..a89444a3c016 100644 --- a/trunk/arch/arm/mm/cache-fa.S +++ b/trunk/arch/arm/mm/cache-fa.S @@ -127,15 +127,16 @@ ENTRY(fa_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(kaddr) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - size of region */ -ENTRY(fa_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(fa_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -213,7 +214,7 @@ ENTRY(fa_cache_fns) .long fa_flush_user_cache_range .long fa_coherent_kern_range .long fa_coherent_user_range - .long fa_flush_kern_dcache_page + .long fa_flush_kern_dcache_area .long fa_dma_inv_range .long fa_dma_clean_range .long fa_dma_flush_range diff --git a/trunk/arch/arm/mm/cache-l2x0.c b/trunk/arch/arm/mm/cache-l2x0.c index 747f9a9021bb..cb8fc6573b1b 100644 --- a/trunk/arch/arm/mm/cache-l2x0.c +++ b/trunk/arch/arm/mm/cache-l2x0.c @@ -28,69 +28,120 @@ static void __iomem *l2x0_base; static DEFINE_SPINLOCK(l2x0_lock); -static inline void sync_writel(unsigned long val, unsigned long reg, - unsigned long complete_mask) +static inline void cache_wait(void __iomem *reg, unsigned long mask) { - unsigned long flags; - - spin_lock_irqsave(&l2x0_lock, flags); - writel(val, l2x0_base + reg); /* wait for the operation to complete */ - while (readl(l2x0_base + reg) & complete_mask) + while (readl(reg) & mask) ; - spin_unlock_irqrestore(&l2x0_lock, flags); } static inline void cache_sync(void) { - sync_writel(0, L2X0_CACHE_SYNC, 1); + void __iomem *base = l2x0_base; + writel(0, base + L2X0_CACHE_SYNC); + cache_wait(base + L2X0_CACHE_SYNC, 1); } static inline void l2x0_inv_all(void) { + unsigned long flags; + /* invalidate all ways */ - sync_writel(0xff, L2X0_INV_WAY, 0xff); + spin_lock_irqsave(&l2x0_lock, flags); + writel(0xff, l2x0_base + L2X0_INV_WAY); + cache_wait(l2x0_base + L2X0_INV_WAY, 0xff); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_range(unsigned long start, unsigned long end) { - unsigned long addr; + void __iomem *base = l2x0_base; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); - sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); - sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(end, base + L2X0_CLEAN_INV_LINE_PA); } - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_INV_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + cache_wait(base + L2X0_INV_LINE_PA, 1); + writel(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } + cache_wait(base + L2X0_INV_LINE_PA, 1); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_range(unsigned long start, unsigned long end) { - unsigned long addr; + void __iomem *base = l2x0_base; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_CLEAN_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + cache_wait(base + L2X0_CLEAN_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } + cache_wait(base + L2X0_CLEAN_LINE_PA, 1); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_flush_range(unsigned long start, unsigned long end) { - unsigned long addr; + void __iomem *base = l2x0_base; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) diff --git a/trunk/arch/arm/mm/cache-v3.S b/trunk/arch/arm/mm/cache-v3.S index 8a4abebc478a..2a482731ea36 100644 --- a/trunk/arch/arm/mm/cache-v3.S +++ b/trunk/arch/arm/mm/cache-v3.S @@ -72,14 +72,15 @@ ENTRY(v3_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *page, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v3_flush_kern_dcache_page) +ENTRY(v3_flush_kern_dcache_area) /* FALLTHROUGH */ /* @@ -129,7 +130,7 @@ ENTRY(v3_cache_fns) .long v3_flush_user_cache_range .long v3_coherent_kern_range .long v3_coherent_user_range - .long v3_flush_kern_dcache_page + .long v3_flush_kern_dcache_area .long v3_dma_inv_range .long v3_dma_clean_range .long v3_dma_flush_range diff --git a/trunk/arch/arm/mm/cache-v4.S b/trunk/arch/arm/mm/cache-v4.S index 3668611cb400..5c7da3e372e9 100644 --- a/trunk/arch/arm/mm/cache-v4.S +++ b/trunk/arch/arm/mm/cache-v4.S @@ -82,14 +82,15 @@ ENTRY(v4_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4_flush_kern_dcache_page) +ENTRY(v4_flush_kern_dcache_area) /* FALLTHROUGH */ /* @@ -141,7 +142,7 @@ ENTRY(v4_cache_fns) .long v4_flush_user_cache_range .long v4_coherent_kern_range .long v4_coherent_user_range - .long v4_flush_kern_dcache_page + .long v4_flush_kern_dcache_area .long v4_dma_inv_range .long v4_dma_clean_range .long v4_dma_flush_range diff --git a/trunk/arch/arm/mm/cache-v4wb.S b/trunk/arch/arm/mm/cache-v4wb.S index 2ebc1b3bf856..3dbedf1ec0e7 100644 --- a/trunk/arch/arm/mm/cache-v4wb.S +++ b/trunk/arch/arm/mm/cache-v4wb.S @@ -114,15 +114,16 @@ ENTRY(v4wb_flush_user_cache_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4wb_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(v4wb_flush_kern_dcache_area) + add r1, r0, r1 /* fall through */ /* @@ -224,7 +225,7 @@ ENTRY(v4wb_cache_fns) .long v4wb_flush_user_cache_range .long v4wb_coherent_kern_range .long v4wb_coherent_user_range - .long v4wb_flush_kern_dcache_page + .long v4wb_flush_kern_dcache_area .long v4wb_dma_inv_range .long v4wb_dma_clean_range .long v4wb_dma_flush_range diff --git a/trunk/arch/arm/mm/cache-v4wt.S b/trunk/arch/arm/mm/cache-v4wt.S index c54fa2cc40e6..b3b7410270b4 100644 --- a/trunk/arch/arm/mm/cache-v4wt.S +++ b/trunk/arch/arm/mm/cache-v4wt.S @@ -117,17 +117,18 @@ ENTRY(v4wt_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4wt_flush_kern_dcache_page) +ENTRY(v4wt_flush_kern_dcache_area) mov r2, #0 mcr p15, 0, r2, c7, c5, 0 @ invalidate I cache - add r1, r0, #PAGE_SZ + add r1, r0, r1 /* fallthrough */ /* @@ -180,7 +181,7 @@ ENTRY(v4wt_cache_fns) .long v4wt_flush_user_cache_range .long v4wt_coherent_kern_range .long v4wt_coherent_user_range - .long v4wt_flush_kern_dcache_page + .long v4wt_flush_kern_dcache_area .long v4wt_dma_inv_range .long v4wt_dma_clean_range .long v4wt_dma_flush_range diff --git a/trunk/arch/arm/mm/cache-v6.S b/trunk/arch/arm/mm/cache-v6.S index 295e25dd6381..4ba0a24ce6f5 100644 --- a/trunk/arch/arm/mm/cache-v6.S +++ b/trunk/arch/arm/mm/cache-v6.S @@ -159,15 +159,16 @@ ENDPROC(v6_coherent_user_range) ENDPROC(v6_coherent_kern_range) /* - * v6_flush_kern_dcache_page(kaddr) + * v6_flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - region size */ -ENTRY(v6_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(v6_flush_kern_dcache_area) + add r1, r0, r1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line @@ -271,7 +272,7 @@ ENTRY(v6_cache_fns) .long v6_flush_user_cache_range .long v6_coherent_kern_range .long v6_coherent_user_range - .long v6_flush_kern_dcache_page + .long v6_flush_kern_dcache_area .long v6_dma_inv_range .long v6_dma_clean_range .long v6_dma_flush_range diff --git a/trunk/arch/arm/mm/cache-v7.S b/trunk/arch/arm/mm/cache-v7.S index e1bd9759617f..9073db849fb4 100644 --- a/trunk/arch/arm/mm/cache-v7.S +++ b/trunk/arch/arm/mm/cache-v7.S @@ -186,16 +186,17 @@ ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) /* - * v7_flush_kern_dcache_page(kaddr) + * v7_flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - region size */ -ENTRY(v7_flush_kern_dcache_page) +ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -203,7 +204,7 @@ ENTRY(v7_flush_kern_dcache_page) blo 1b dsb mov pc, lr -ENDPROC(v7_flush_kern_dcache_page) +ENDPROC(v7_flush_kern_dcache_area) /* * v7_dma_inv_range(start,end) @@ -279,7 +280,7 @@ ENTRY(v7_cache_fns) .long v7_flush_user_cache_range .long v7_coherent_kern_range .long v7_coherent_user_range - .long v7_flush_kern_dcache_page + .long v7_flush_kern_dcache_area .long v7_dma_inv_range .long v7_dma_clean_range .long v7_dma_flush_range diff --git a/trunk/arch/arm/mm/flush.c b/trunk/arch/arm/mm/flush.c index 329594e760cd..6f3a4b7a3b82 100644 --- a/trunk/arch/arm/mm/flush.c +++ b/trunk/arch/arm/mm/flush.c @@ -131,7 +131,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) */ if (addr) #endif - __cpuc_flush_dcache_page(addr); + __cpuc_flush_dcache_area(addr, PAGE_SIZE); /* * If this is a page cache page, and we have an aliasing VIPT cache, @@ -258,5 +258,5 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l * in this mapping of the page. FIXME: this is overkill * since we actually ask for a write-back and invalidate. */ - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } diff --git a/trunk/arch/arm/mm/highmem.c b/trunk/arch/arm/mm/highmem.c index 30f82fb5918c..2be1ec7c1b41 100644 --- a/trunk/arch/arm/mm/highmem.c +++ b/trunk/arch/arm/mm/highmem.c @@ -79,7 +79,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type) unsigned int idx = type + KM_TYPE_NR * smp_processor_id(); if (kvaddr >= (void *)FIXADDR_START) { - __cpuc_flush_dcache_page((void *)vaddr); + __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); set_pte_ext(TOP_PTE(vaddr), __pte(0), 0); diff --git a/trunk/arch/arm/mm/nommu.c b/trunk/arch/arm/mm/nommu.c index 900811cc9130..374a8311bc84 100644 --- a/trunk/arch/arm/mm/nommu.c +++ b/trunk/arch/arm/mm/nommu.c @@ -61,7 +61,7 @@ void setup_mm_for_reboot(char mode) void flush_dcache_page(struct page *page) { - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } EXPORT_SYMBOL(flush_dcache_page); diff --git a/trunk/arch/arm/mm/proc-arm1020.S b/trunk/arch/arm/mm/proc-arm1020.S index d9fb4b98c49f..8012e24282b2 100644 --- a/trunk/arch/arm/mm/proc-arm1020.S +++ b/trunk/arch/arm/mm/proc-arm1020.S @@ -231,17 +231,18 @@ ENTRY(arm1020_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1020_flush_kern_dcache_page) +ENTRY(arm1020_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry mcr p15, 0, ip, c7, c10, 4 @ drain WB add r0, r0, #CACHE_DLINESIZE @@ -335,7 +336,7 @@ ENTRY(arm1020_cache_fns) .long arm1020_flush_user_cache_range .long arm1020_coherent_kern_range .long arm1020_coherent_user_range - .long arm1020_flush_kern_dcache_page + .long arm1020_flush_kern_dcache_area .long arm1020_dma_inv_range .long arm1020_dma_clean_range .long arm1020_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm1020e.S b/trunk/arch/arm/mm/proc-arm1020e.S index 7453b75dcea5..41fe25d234f5 100644 --- a/trunk/arch/arm/mm/proc-arm1020e.S +++ b/trunk/arch/arm/mm/proc-arm1020e.S @@ -225,17 +225,18 @@ ENTRY(arm1020e_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1020e_flush_kern_dcache_page) +ENTRY(arm1020e_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -321,7 +322,7 @@ ENTRY(arm1020e_cache_fns) .long arm1020e_flush_user_cache_range .long arm1020e_coherent_kern_range .long arm1020e_coherent_user_range - .long arm1020e_flush_kern_dcache_page + .long arm1020e_flush_kern_dcache_area .long arm1020e_dma_inv_range .long arm1020e_dma_clean_range .long arm1020e_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm1022.S b/trunk/arch/arm/mm/proc-arm1022.S index 8eb72d75a8b6..20a5b1b31a70 100644 --- a/trunk/arch/arm/mm/proc-arm1022.S +++ b/trunk/arch/arm/mm/proc-arm1022.S @@ -214,17 +214,18 @@ ENTRY(arm1022_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1022_flush_kern_dcache_page) +ENTRY(arm1022_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -310,7 +311,7 @@ ENTRY(arm1022_cache_fns) .long arm1022_flush_user_cache_range .long arm1022_coherent_kern_range .long arm1022_coherent_user_range - .long arm1022_flush_kern_dcache_page + .long arm1022_flush_kern_dcache_area .long arm1022_dma_inv_range .long arm1022_dma_clean_range .long arm1022_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm1026.S b/trunk/arch/arm/mm/proc-arm1026.S index 3b59f0d67139..96aedb10fcc4 100644 --- a/trunk/arch/arm/mm/proc-arm1026.S +++ b/trunk/arch/arm/mm/proc-arm1026.S @@ -208,17 +208,18 @@ ENTRY(arm1026_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1026_flush_kern_dcache_page) +ENTRY(arm1026_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -304,7 +305,7 @@ ENTRY(arm1026_cache_fns) .long arm1026_flush_user_cache_range .long arm1026_coherent_kern_range .long arm1026_coherent_user_range - .long arm1026_flush_kern_dcache_page + .long arm1026_flush_kern_dcache_area .long arm1026_dma_inv_range .long arm1026_dma_clean_range .long arm1026_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm920.S b/trunk/arch/arm/mm/proc-arm920.S index 2b7c197cc58d..471669e2d7cb 100644 --- a/trunk/arch/arm/mm/proc-arm920.S +++ b/trunk/arch/arm/mm/proc-arm920.S @@ -207,15 +207,16 @@ ENTRY(arm920_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm920_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm920_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -293,7 +294,7 @@ ENTRY(arm920_cache_fns) .long arm920_flush_user_cache_range .long arm920_coherent_kern_range .long arm920_coherent_user_range - .long arm920_flush_kern_dcache_page + .long arm920_flush_kern_dcache_area .long arm920_dma_inv_range .long arm920_dma_clean_range .long arm920_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm922.S b/trunk/arch/arm/mm/proc-arm922.S index 06a1aa4e3398..ee111b00fa41 100644 --- a/trunk/arch/arm/mm/proc-arm922.S +++ b/trunk/arch/arm/mm/proc-arm922.S @@ -209,15 +209,16 @@ ENTRY(arm922_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm922_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm922_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -295,7 +296,7 @@ ENTRY(arm922_cache_fns) .long arm922_flush_user_cache_range .long arm922_coherent_kern_range .long arm922_coherent_user_range - .long arm922_flush_kern_dcache_page + .long arm922_flush_kern_dcache_area .long arm922_dma_inv_range .long arm922_dma_clean_range .long arm922_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm925.S b/trunk/arch/arm/mm/proc-arm925.S index cb53435a85ae..8deb5bde58e4 100644 --- a/trunk/arch/arm/mm/proc-arm925.S +++ b/trunk/arch/arm/mm/proc-arm925.S @@ -251,15 +251,16 @@ ENTRY(arm925_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm925_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm925_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -346,7 +347,7 @@ ENTRY(arm925_cache_fns) .long arm925_flush_user_cache_range .long arm925_coherent_kern_range .long arm925_coherent_user_range - .long arm925_flush_kern_dcache_page + .long arm925_flush_kern_dcache_area .long arm925_dma_inv_range .long arm925_dma_clean_range .long arm925_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm926.S b/trunk/arch/arm/mm/proc-arm926.S index 1c4848704bb3..64db6e275a44 100644 --- a/trunk/arch/arm/mm/proc-arm926.S +++ b/trunk/arch/arm/mm/proc-arm926.S @@ -214,15 +214,16 @@ ENTRY(arm926_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm926_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm926_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -309,7 +310,7 @@ ENTRY(arm926_cache_fns) .long arm926_flush_user_cache_range .long arm926_coherent_kern_range .long arm926_coherent_user_range - .long arm926_flush_kern_dcache_page + .long arm926_flush_kern_dcache_area .long arm926_dma_inv_range .long arm926_dma_clean_range .long arm926_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm940.S b/trunk/arch/arm/mm/proc-arm940.S index 5b0f8464c8f2..8196b9f401fb 100644 --- a/trunk/arch/arm/mm/proc-arm940.S +++ b/trunk/arch/arm/mm/proc-arm940.S @@ -141,14 +141,15 @@ ENTRY(arm940_coherent_user_range) /* FALLTHROUGH */ /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm940_flush_kern_dcache_page) +ENTRY(arm940_flush_kern_dcache_area) mov ip, #0 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries @@ -238,7 +239,7 @@ ENTRY(arm940_cache_fns) .long arm940_flush_user_cache_range .long arm940_coherent_kern_range .long arm940_coherent_user_range - .long arm940_flush_kern_dcache_page + .long arm940_flush_kern_dcache_area .long arm940_dma_inv_range .long arm940_dma_clean_range .long arm940_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-arm946.S b/trunk/arch/arm/mm/proc-arm946.S index 40c0449a139b..9a951239c86c 100644 --- a/trunk/arch/arm/mm/proc-arm946.S +++ b/trunk/arch/arm/mm/proc-arm946.S @@ -183,16 +183,17 @@ ENTRY(arm946_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size * (same as arm926) */ -ENTRY(arm946_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm946_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -280,7 +281,7 @@ ENTRY(arm946_cache_fns) .long arm946_flush_user_cache_range .long arm946_coherent_kern_range .long arm946_coherent_user_range - .long arm946_flush_kern_dcache_page + .long arm946_flush_kern_dcache_area .long arm946_dma_inv_range .long arm946_dma_clean_range .long arm946_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-feroceon.S b/trunk/arch/arm/mm/proc-feroceon.S index d0d7795200fc..dbc39383e66a 100644 --- a/trunk/arch/arm/mm/proc-feroceon.S +++ b/trunk/arch/arm/mm/proc-feroceon.S @@ -226,16 +226,17 @@ ENTRY(feroceon_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ .align 5 -ENTRY(feroceon_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(feroceon_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -246,7 +247,7 @@ ENTRY(feroceon_flush_kern_dcache_page) mov pc, lr .align 5 -ENTRY(feroceon_range_flush_kern_dcache_page) +ENTRY(feroceon_range_flush_kern_dcache_area) mrs r2, cpsr add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive orr r3, r2, #PSR_I_BIT @@ -372,7 +373,7 @@ ENTRY(feroceon_cache_fns) .long feroceon_flush_user_cache_range .long feroceon_coherent_kern_range .long feroceon_coherent_user_range - .long feroceon_flush_kern_dcache_page + .long feroceon_flush_kern_dcache_area .long feroceon_dma_inv_range .long feroceon_dma_clean_range .long feroceon_dma_flush_range @@ -383,7 +384,7 @@ ENTRY(feroceon_range_cache_fns) .long feroceon_flush_user_cache_range .long feroceon_coherent_kern_range .long feroceon_coherent_user_range - .long feroceon_range_flush_kern_dcache_page + .long feroceon_range_flush_kern_dcache_area .long feroceon_range_dma_inv_range .long feroceon_range_dma_clean_range .long feroceon_range_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-mohawk.S b/trunk/arch/arm/mm/proc-mohawk.S index 52b5fd74fbb3..9674d36cc97d 100644 --- a/trunk/arch/arm/mm/proc-mohawk.S +++ b/trunk/arch/arm/mm/proc-mohawk.S @@ -186,15 +186,16 @@ ENTRY(mohawk_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(mohawk_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(mohawk_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -273,7 +274,7 @@ ENTRY(mohawk_cache_fns) .long mohawk_flush_user_cache_range .long mohawk_coherent_kern_range .long mohawk_coherent_user_range - .long mohawk_flush_kern_dcache_page + .long mohawk_flush_kern_dcache_area .long mohawk_dma_inv_range .long mohawk_dma_clean_range .long mohawk_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-syms.c b/trunk/arch/arm/mm/proc-syms.c index ac5c80062b70..3e6210b4d6d4 100644 --- a/trunk/arch/arm/mm/proc-syms.c +++ b/trunk/arch/arm/mm/proc-syms.c @@ -27,8 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); -EXPORT_SYMBOL(__cpuc_flush_dcache_page); -EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ +EXPORT_SYMBOL(__cpuc_flush_dcache_area); #else EXPORT_SYMBOL(cpu_cache); #endif diff --git a/trunk/arch/arm/mm/proc-v6.S b/trunk/arch/arm/mm/proc-v6.S index 5485c821101c..395cc90c6613 100644 --- a/trunk/arch/arm/mm/proc-v6.S +++ b/trunk/arch/arm/mm/proc-v6.S @@ -254,10 +254,9 @@ __pj4_v6_proc_info: .long 0x560f5810 .long 0xff0ffff0 .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/trunk/arch/arm/mm/proc-xsc3.S b/trunk/arch/arm/mm/proc-xsc3.S index fab134e29826..96456f548798 100644 --- a/trunk/arch/arm/mm/proc-xsc3.S +++ b/trunk/arch/arm/mm/proc-xsc3.S @@ -226,15 +226,16 @@ ENTRY(xsc3_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache. * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(xsc3_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(xsc3_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE cmp r0, r1 @@ -309,7 +310,7 @@ ENTRY(xsc3_cache_fns) .long xsc3_flush_user_cache_range .long xsc3_coherent_kern_range .long xsc3_coherent_user_range - .long xsc3_flush_kern_dcache_page + .long xsc3_flush_kern_dcache_area .long xsc3_dma_inv_range .long xsc3_dma_clean_range .long xsc3_dma_flush_range diff --git a/trunk/arch/arm/mm/proc-xscale.S b/trunk/arch/arm/mm/proc-xscale.S index f056c283682d..93df47265f2d 100644 --- a/trunk/arch/arm/mm/proc-xscale.S +++ b/trunk/arch/arm/mm/proc-xscale.S @@ -284,15 +284,16 @@ ENTRY(xscale_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(xscale_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(xscale_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry add r0, r0, #CACHELINESIZE @@ -368,7 +369,7 @@ ENTRY(xscale_cache_fns) .long xscale_flush_user_cache_range .long xscale_coherent_kern_range .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_page + .long xscale_flush_kern_dcache_area .long xscale_dma_inv_range .long xscale_dma_clean_range .long xscale_dma_flush_range @@ -392,7 +393,7 @@ ENTRY(xscale_80200_A0_A1_cache_fns) .long xscale_flush_user_cache_range .long xscale_coherent_kern_range .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_page + .long xscale_flush_kern_dcache_area .long xscale_dma_flush_range .long xscale_dma_clean_range .long xscale_dma_flush_range diff --git a/trunk/arch/arm/plat-mxc/include/mach/mxc_nand.h b/trunk/arch/arm/plat-mxc/include/mach/mxc_nand.h index 2b972df22d12..5d2d21d414e0 100644 --- a/trunk/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/trunk/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -22,6 +22,7 @@ struct mxc_nand_platform_data { int width; /* data bus width in bytes */ - int hw_ecc; /* 0 if supress hardware ECC */ + int hw_ecc:1; /* 0 if supress hardware ECC */ + int flash_bbt:1; /* set to 1 to use a flash based bbt */ }; #endif /* __ASM_ARCH_NAND_H */ diff --git a/trunk/arch/arm/plat-s3c/include/plat/nand.h b/trunk/arch/arm/plat-s3c/include/plat/nand.h index 065985978413..226147b7e026 100644 --- a/trunk/arch/arm/plat-s3c/include/plat/nand.h +++ b/trunk/arch/arm/plat-s3c/include/plat/nand.h @@ -17,6 +17,7 @@ * Setting this flag will allow the kernel to * look for it at boot time and also skip the NAND * scan. + * @options: Default value to set into 'struct nand_chip' options. * @nr_chips: Number of chips in this set * @nr_partitions: Number of partitions pointed to by @partitions * @name: Name of set (optional) @@ -31,6 +32,7 @@ struct s3c2410_nand_set { unsigned int disable_ecc:1; unsigned int flash_bbt:1; + unsigned int options; int nr_chips; int nr_partitions; char *name; diff --git a/trunk/arch/arm/tools/Makefile b/trunk/arch/arm/tools/Makefile index 1dbaa29ac4d7..635cb1865e4d 100644 --- a/trunk/arch/arm/tools/Makefile +++ b/trunk/arch/arm/tools/Makefile @@ -4,7 +4,7 @@ # Copyright (C) 2001 Russell King # -include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types +include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/trunk/arch/arm/tools/gen-mach-types b/trunk/arch/arm/tools/gen-mach-types index ce319ef64bc1..04fef71d7be9 100644 --- a/trunk/arch/arm/tools/gen-mach-types +++ b/trunk/arch/arm/tools/gen-mach-types @@ -1,6 +1,6 @@ #!/bin/awk # -# Awk script to generate include/asm-arm/mach-types.h +# Awk script to generate include/generated/mach-types.h # BEGIN { nr = 0 } /^#/ { next } diff --git a/trunk/arch/arm/tools/mach-types b/trunk/arch/arm/tools/mach-types index 07b976da6174..c3a74ce24ef6 100644 --- a/trunk/arch/arm/tools/mach-types +++ b/trunk/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Wed Nov 25 22:14:58 2009 +# Last update: Wed Dec 16 20:06:34 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1776,6 +1776,7 @@ cybook3 MACH_CYBOOK3 CYBOOK3 1784 wdg002 MACH_WDG002 WDG002 1785 sg560adsl MACH_SG560ADSL SG560ADSL 1786 nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787 +dove_db MACH_DOVE_DB DOVE_DB 1788 marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789 vandihud MACH_VANDIHUD VANDIHUD 1790 magx_e8 MACH_MAGX_E8 MAGX_E8 1791 @@ -2536,3 +2537,44 @@ c3ax03 MACH_C3AX03 C3AX03 2549 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 esyx MACH_ESYX ESYX 2551 bulldog MACH_BULLDOG BULLDOG 2553 +derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554 +bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555 +bcmring_evm MACH_BCMRING_EVM BCMRING_EVM 2556 +bcmring_evm_jazz MACH_BCMRING_EVM_JAZZ BCMRING_EVM_JAZZ 2557 +bcmring_sp MACH_BCMRING_SP BCMRING_SP 2558 +bcmring_sv MACH_BCMRING_SV BCMRING_SV 2559 +bcmring_sv_jazz MACH_BCMRING_SV_JAZZ BCMRING_SV_JAZZ 2560 +bcmring_tablet MACH_BCMRING_TABLET BCMRING_TABLET 2561 +bcmring_vp MACH_BCMRING_VP BCMRING_VP 2562 +bcmring_evm_seikor MACH_BCMRING_EVM_SEIKOR BCMRING_EVM_SEIKOR 2563 +bcmring_sp_wqvga MACH_BCMRING_SP_WQVGA BCMRING_SP_WQVGA 2564 +bcmring_custom MACH_BCMRING_CUSTOM BCMRING_CUSTOM 2565 +acer_s200 MACH_ACER_S200 ACER_S200 2566 +bt270 MACH_BT270 BT270 2567 +iseo MACH_ISEO ISEO 2568 +cezanne MACH_CEZANNE CEZANNE 2569 +lucca MACH_LUCCA LUCCA 2570 +supersmart MACH_SUPERSMART SUPERSMART 2571 +magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573 +emxx MACH_EMXX EMXX 2574 +outlaw MACH_OUTLAW OUTLAW 2575 +riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576 +riot_vox MACH_RIOT_VOX RIOT_VOX 2577 +riot_x37 MACH_RIOT_X37 RIOT_X37 2578 +mega25mx MACH_MEGA25MX MEGA25MX 2579 +benzina2 MACH_BENZINA2 BENZINA2 2580 +ignite MACH_IGNITE IGNITE 2581 +foggia MACH_FOGGIA FOGGIA 2582 +arezzo MACH_AREZZO AREZZO 2583 +leica_skywalker MACH_LEICA_SKYWALKER LEICA_SKYWALKER 2584 +jacinto2_jamr MACH_JACINTO2_JAMR JACINTO2_JAMR 2585 +gts_nova MACH_GTS_NOVA GTS_NOVA 2586 +p3600 MACH_P3600 P3600 2587 +dlt2 MACH_DLT2 DLT2 2588 +df3120 MACH_DF3120 DF3120 2589 +ecucore_9g20 MACH_ECUCORE_9G20 ECUCORE_9G20 2590 +nautel_lpc3240 MACH_NAUTEL_LPC3240 NAUTEL_LPC3240 2591 +glacier MACH_GLACIER GLACIER 2592 +phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593 +omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594 +pca101 MACH_PCA101 PCA101 2595 diff --git a/trunk/arch/avr32/include/asm/asm-offsets.h b/trunk/arch/avr32/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/avr32/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/avr32/include/asm/elf.h b/trunk/arch/avr32/include/asm/elf.h index d5d1d41c600a..3b3159b710d4 100644 --- a/trunk/arch/avr32/include/asm/elf.h +++ b/trunk/arch/avr32/include/asm/elf.h @@ -77,7 +77,6 @@ typedef struct user_fpu_struct elf_fpregset_t; #endif #define ELF_ARCH EM_AVR32 -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/trunk/arch/blackfin/Kconfig b/trunk/arch/blackfin/Kconfig index ae6a60f10120..53c1e1d45c68 100644 --- a/trunk/arch/blackfin/Kconfig +++ b/trunk/arch/blackfin/Kconfig @@ -5,6 +5,10 @@ mainmenu "Blackfin Kernel Configuration" +config SYMBOL_PREFIX + string + default "_" + config MMU def_bool n @@ -28,6 +32,9 @@ config BLACKFIN select HAVE_OPROFILE select ARCH_WANT_OPTIONAL_GPIOLIB +config GENERIC_CSUM + def_bool y + config GENERIC_BUG def_bool y depends on BUG @@ -173,7 +180,7 @@ config BF539 help BF539 Processor Support. -config BF542 +config BF542_std bool "BF542" help BF542 Processor Support. @@ -183,7 +190,7 @@ config BF542M help BF542 Processor Support. -config BF544 +config BF544_std bool "BF544" help BF544 Processor Support. @@ -193,7 +200,7 @@ config BF544M help BF544 Processor Support. -config BF547 +config BF547_std bool "BF547" help BF547 Processor Support. @@ -203,7 +210,7 @@ config BF547M help BF547 Processor Support. -config BF548 +config BF548_std bool "BF548" help BF548 Processor Support. @@ -213,7 +220,7 @@ config BF548M help BF548 Processor Support. -config BF549 +config BF549_std bool "BF549" help BF549 Processor Support. @@ -307,31 +314,11 @@ config BF_REV_NONE endchoice -config BF51x - bool - depends on (BF512 || BF514 || BF516 || BF518) - default y - -config BF52x - bool - depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) - default y - config BF53x bool depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y -config BF54xM - bool - depends on (BF542M || BF544M || BF547M || BF548M || BF549M) - default y - -config BF54x - bool - depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM) - default y - config MEM_GENERIC_BOARD bool depends on GENERIC_BOARD @@ -913,6 +900,12 @@ config DMA_UNCACHED_2M bool "Enable 2M DMA region" config DMA_UNCACHED_1M bool "Enable 1M DMA region" +config DMA_UNCACHED_512K + bool "Enable 512K DMA region" +config DMA_UNCACHED_256K + bool "Enable 256K DMA region" +config DMA_UNCACHED_128K + bool "Enable 128K DMA region" config DMA_UNCACHED_NONE bool "Disable DMA region" endchoice @@ -1274,6 +1267,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/blackfin/Kconfig.debug" diff --git a/trunk/arch/blackfin/Makefile b/trunk/arch/blackfin/Makefile index f063b772934b..d4c7177e7656 100644 --- a/trunk/arch/blackfin/Makefile +++ b/trunk/arch/blackfin/Makefile @@ -16,6 +16,7 @@ GZFLAGS := -9 KBUILD_CFLAGS += $(call cc-option,-mno-fdpic) KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) CFLAGS_MODULE += -mlong-calls +LDFLAGS_MODULE += -m elf32bfin KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig @@ -137,7 +138,7 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma +BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma PHONY += $(BOOT_TARGETS) install KBUILD_IMAGE := $(boot)/vmImage @@ -151,6 +152,7 @@ install: define archhelp echo '* vmImage - Alias to selected kernel format (vmImage.gz by default)' + echo ' vmImage.bin - Uncompressed Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bin)' echo ' vmImage.bz2 - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)' echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)' echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)' diff --git a/trunk/arch/blackfin/boot/Makefile b/trunk/arch/blackfin/boot/Makefile index fd9ccc5fea10..e9c48c6f8c1f 100644 --- a/trunk/arch/blackfin/boot/Makefile +++ b/trunk/arch/blackfin/boot/Makefile @@ -8,7 +8,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma +targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma quiet_cmd_uimage = UIMAGE $@ @@ -29,6 +29,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE $(call if_changed,lzma) +$(obj)/vmImage.bin: $(obj)/vmlinux.bin + $(call if_changed,uimage,none) + $(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2 $(call if_changed,uimage,bzip2) @@ -38,6 +41,7 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma diff --git a/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig b/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig index 9905b26009e5..e31559419817 100644 --- a/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -316,6 +317,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -438,17 +440,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -CONFIG_NET_DSA=y -# CONFIG_NET_DSA_TAG_DSA is not set -# CONFIG_NET_DSA_TAG_EDSA is not set -# CONFIG_NET_DSA_TAG_TRAILER is not set -CONFIG_NET_DSA_TAG_STPID=y -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6060 is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -CONFIG_NET_DSA_KSZ8893M=y +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set diff --git a/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig b/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig index 9dc682088023..075e0fdcb399 100644 --- a/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -321,6 +322,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig index 77e35d4baf53..6d1a623fb149 100644 --- a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -321,6 +322,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig index 4c044805cb5c..50f9a23ccdbd 100644 --- a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -283,6 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig index c99bbcd09a68..6c60c8286318 100644 --- a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -283,6 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig index 092ffda80e68..2908595b67c5 100644 --- a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -290,6 +291,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -704,10 +706,7 @@ CONFIG_CONFIG_INPUT_PCF8574=m # # Hardware I/O ports # -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # diff --git a/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig index fa698a89f6fe..09ea2499555e 100644 --- a/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -301,6 +302,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig index f773ad1155d4..eb3e98b6f3f0 100644 --- a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,22 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.31.5 +# Mon Nov 2 22:02:56 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +33,40 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,17 +87,28 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -80,11 +116,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -94,13 +127,12 @@ CONFIG_BLOCK=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -137,7 +169,7 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF544M is not set # CONFIG_BF547 is not set # CONFIG_BF547M is not set -CONFIG_BF548=y +CONFIG_BF548_std=y # CONFIG_BF548M is not set # CONFIG_BF549 is not set # CONFIG_BF549M is not set @@ -195,7 +227,7 @@ CONFIG_BFIN548_EZKIT=y # # BF548 Specific Configuration # -# CONFIG_DEB_DMA_URGENT is not set +CONFIG_DEB_DMA_URGENT=y # CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set # @@ -352,10 +384,11 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set CONFIG_DMA_UNCACHED_2M=y @@ -366,14 +399,13 @@ CONFIG_DMA_UNCACHED_2M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y -CONFIG_BFIN_EXTMEM_WRITEBACK=y -# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_EXTMEM_WRITEBACK is not set +CONFIG_BFIN_EXTMEM_WRITETHROUGH=y # CONFIG_BFIN_L2_DCACHEABLE is not set # @@ -382,7 +414,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -441,11 +473,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -469,13 +496,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -493,7 +518,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -548,14 +576,10 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS is not set CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +CONFIG_LIB80211=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -578,6 +602,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -653,7 +678,6 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_BFIN is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_BF5XX=y CONFIG_MTD_NAND_BF5XX_HWECC=y @@ -664,6 +688,11 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -682,10 +711,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -709,10 +748,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -729,6 +764,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -744,13 +780,34 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set -CONFIG_SMSC911X=y # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -759,6 +816,8 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -771,12 +830,15 @@ CONFIG_LIBERTAS=m # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=m CONFIG_POWEROF2_BLOCKSIZE_ONLY=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_USB_ZD1201 is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -813,28 +875,31 @@ CONFIG_INPUT_EVBUG=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_BFIN=y # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_GPIO is not set -CONFIG_KEYBOARD_BFIN=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -844,6 +909,8 @@ CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_WM97XX is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set @@ -852,7 +919,11 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_BFIN_ROTARY is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -863,16 +934,13 @@ CONFIG_INPUT_MISC=y # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y @@ -890,6 +958,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -903,6 +972,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_OTP=y # CONFIG_BFIN_OTP_WRITE_ENABLE is not set @@ -951,14 +1021,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -975,13 +1040,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -997,6 +1067,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1038,28 +1109,19 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1096,6 +1158,7 @@ CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1132,6 +1195,7 @@ CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y @@ -1142,6 +1206,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -1152,7 +1221,6 @@ CONFIG_SND_SPI=y # # ALSA Blackfin devices # -# CONFIG_SND_BLACKFIN_AD1836 is not set # CONFIG_SND_BFIN_AD73322 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set @@ -1160,15 +1228,17 @@ CONFIG_SND_USB=y CONFIG_SND_SOC=y CONFIG_SND_SOC_AC97_BUS=y # CONFIG_SND_BF5XX_I2S is not set +# CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=y CONFIG_SND_BF5XX_MMAP_SUPPORT=y # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +CONFIG_SND_BF5XX_HAVE_COLD_RESET=y +CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 +CONFIG_SND_BF5XX_SOC_AD1980=y CONFIG_SND_BF5XX_SOC_SPORT=y CONFIG_SND_BF5XX_SOC_AC97=y -CONFIG_SND_BF5XX_SOC_AD1980=y CONFIG_SND_BF5XX_SPORT_NUM=0 -CONFIG_SND_BF5XX_HAVE_COLD_RESET=y -CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 +CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=y # CONFIG_SOUND_PRIME is not set @@ -1188,30 +1258,34 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1237,6 +1311,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set @@ -1267,18 +1342,17 @@ CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1314,7 +1388,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1326,6 +1399,13 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1380,6 +1460,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1411,9 +1492,20 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + # # File systems # @@ -1427,9 +1519,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1438,6 +1532,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1467,10 +1566,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1489,17 +1585,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1508,6 +1595,7 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1522,7 +1610,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1596,11 +1683,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1608,16 +1699,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1625,17 +1721,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y @@ -1657,17 +1752,15 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set -CONFIG_SECURITY=y +# CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y # @@ -1746,6 +1839,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1753,11 +1847,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1767,6 +1863,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/BF561-ACVILON_defconfig b/trunk/arch/blackfin/configs/BF561-ACVILON_defconfig new file mode 100644 index 000000000000..b9b0f93d0bd3 --- /dev/null +++ b/trunk/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -0,0 +1,1643 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31.4 +# Sat Oct 24 12:15:32 2009 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_EPOLL=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set +# CONFIG_BF542 is not set +# CONFIG_BF542M is not set +# CONFIG_BF544 is not set +# CONFIG_BF544M is not set +# CONFIG_BF547 is not set +# CONFIG_BF547M is not set +# CONFIG_BF548 is not set +# CONFIG_BF548M is not set +# CONFIG_BF549 is not set +# CONFIG_BF549M is not set +CONFIG_BF561=y +# CONFIG_SMP is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=5 +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_0_6 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 +CONFIG_IRQ_SPI_ERROR=7 +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +CONFIG_BFIN561_ACVILON=y + +# +# BF561 Specific Configuration +# + +# +# Core B Support +# +# CONFIG_BF561_COREB is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA1_ERROR=7 +CONFIG_IRQ_DMA2_ERROR=7 +CONFIG_IRQ_IMDMA_ERROR=7 +CONFIG_IRQ_PPI0_ERROR=7 +CONFIG_IRQ_PPI1_ERROR=7 +CONFIG_IRQ_UART_ERROR=7 +CONFIG_IRQ_RESERVED_ERROR=7 +CONFIG_IRQ_DMA1_0=8 +CONFIG_IRQ_DMA1_1=8 +CONFIG_IRQ_DMA1_2=8 +CONFIG_IRQ_DMA1_3=8 +CONFIG_IRQ_DMA1_4=8 +CONFIG_IRQ_DMA1_5=8 +CONFIG_IRQ_DMA1_6=8 +CONFIG_IRQ_DMA1_7=8 +CONFIG_IRQ_DMA1_8=8 +CONFIG_IRQ_DMA1_9=8 +CONFIG_IRQ_DMA1_10=8 +CONFIG_IRQ_DMA1_11=8 +CONFIG_IRQ_DMA2_0=9 +CONFIG_IRQ_DMA2_1=9 +CONFIG_IRQ_DMA2_2=9 +CONFIG_IRQ_DMA2_3=9 +CONFIG_IRQ_DMA2_4=9 +CONFIG_IRQ_DMA2_5=9 +CONFIG_IRQ_DMA2_6=9 +CONFIG_IRQ_DMA2_7=9 +CONFIG_IRQ_DMA2_8=9 +CONFIG_IRQ_DMA2_9=9 +CONFIG_IRQ_DMA2_10=9 +CONFIG_IRQ_DMA2_11=9 +CONFIG_IRQ_TIMER8=10 +CONFIG_IRQ_TIMER9=10 +CONFIG_IRQ_TIMER10=10 +CONFIG_IRQ_TIMER11=10 +CONFIG_IRQ_PROG0_INTA=11 +CONFIG_IRQ_PROG0_INTB=11 +CONFIG_IRQ_PROG1_INTA=11 +CONFIG_IRQ_PROG1_INTB=11 +CONFIG_IRQ_PROG2_INTA=11 +CONFIG_IRQ_PROG2_INTB=11 +CONFIG_IRQ_DMA1_WRRD0=8 +CONFIG_IRQ_DMA1_WRRD1=8 +CONFIG_IRQ_DMA2_WRRD0=9 +CONFIG_IRQ_DMA2_WRRD1=9 +CONFIG_IRQ_IMDMA_WRRD0=12 +CONFIG_IRQ_IMDMA_WRRD1=12 +CONFIG_IRQ_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=12000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +CONFIG_CYCLES_CLOCKSOURCE=y +# CONFIG_GPTMR0_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 +CONFIG_BFIN_GPTIMERS=y +CONFIG_DMA_UNCACHED_4M=y +# CONFIG_DMA_UNCACHED_2M is not set +# CONFIG_DMA_UNCACHED_1M is not set +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set + +# +# Asynchronous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +CONFIG_C_B0PEN=y +CONFIG_C_B1PEN=y +CONFIG_C_B2PEN=y +# CONFIG_C_B3PEN is not set +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x99b2 +CONFIG_BANK_1=0x3350 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xAAC2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_UCLINUX is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_MTD_PHRAM=y +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=y + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_BFIN_DMA_INTERFACE is not set +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set +CONFIG_BFIN_SIMPLE_TIMER=y +# CONFIG_BFIN_SPI_ADC is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TWI_LCD is not set +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +# CONFIG_SERIAL_BFIN_DMA is not set +CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=y +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_SPI=y + +# +# ALSA Blackfin devices +# +# CONFIG_SND_BFIN_AD73322 is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_BF5XX_I2S=y +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set +# CONFIG_SND_BF5XX_SOC_AD73311 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_TDM is not set +# CONFIG_SND_BF5XX_AC97 is not set +CONFIG_SND_BF5XX_SOC_SPORT=y +CONFIG_SND_BF5XX_SPORT_NUM=1 +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=866 +CONFIG_FAT_DEFAULT_IOCHARSET="cp1251" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +# CONFIG_JFFS2_ZLIB is not set +CONFIG_JFFS2_LZO=y +# CONFIG_JFFS2_RTIME is not set +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp1251" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +CONFIG_NLS_CODEPAGE_866=y +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1251=y +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_KOI8_R=y +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y +CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig index 0313cd1d9824..e3ecdcc3e76b 100644 --- a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,22 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.31.5 +# Mon Nov 2 21:59:31 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +33,40 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,17 +87,28 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -80,11 +116,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -94,13 +127,12 @@ CONFIG_BLOCK=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -170,6 +202,7 @@ CONFIG_IRQ_SPI_ERROR=7 CONFIG_BFIN561_EZKIT=y # CONFIG_BFIN561_TEPLA is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_ACVILON is not set # # BF561 Specific Configuration @@ -317,10 +350,11 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -331,14 +365,13 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set # CONFIG_BFIN_L2_DCACHEABLE is not set # @@ -347,7 +380,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -407,11 +440,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -435,13 +463,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -459,7 +485,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -503,13 +532,8 @@ CONFIG_IRTTY_SIR=m # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -530,6 +554,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -602,6 +627,11 @@ CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -619,9 +649,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -645,9 +680,11 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -656,6 +693,8 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -664,7 +703,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -708,15 +750,12 @@ CONFIG_INPUT_EVDEV=m # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set CONFIG_BFIN_JTAG_COMM=m @@ -730,6 +769,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -740,6 +780,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -763,13 +804,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -782,9 +828,6 @@ CONFIG_GPIO_SYSFS=y # # I2C GPIO expanders: # -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set # # PCI GPIO expanders: @@ -822,23 +865,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -862,7 +891,6 @@ CONFIG_HID=m # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -870,9 +898,19 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set + # # File systems # @@ -882,9 +920,11 @@ CONFIG_HID_COMPAT=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -893,6 +933,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -915,10 +960,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -937,17 +979,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -956,6 +989,7 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -966,7 +1000,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1034,11 +1067,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1046,16 +1083,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1063,17 +1105,19 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y @@ -1095,16 +1139,15 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set -CONFIG_SECURITY=y +# CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y # @@ -1183,6 +1226,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1190,11 +1234,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1204,6 +1250,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/BlackStamp_defconfig b/trunk/arch/blackfin/configs/BlackStamp_defconfig index 5d944ffd4ab0..9e65d885ec0b 100644 --- a/trunk/arch/blackfin/configs/BlackStamp_defconfig +++ b/trunk/arch/blackfin/configs/BlackStamp_defconfig @@ -66,6 +66,7 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -275,6 +276,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/trunk/arch/blackfin/configs/CM-BF527_defconfig b/trunk/arch/blackfin/configs/CM-BF527_defconfig index 648a31d01bf4..4432150d89e3 100644 --- a/trunk/arch/blackfin/configs/CM-BF527_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF527_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -15,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -25,55 +29,72 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +102,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +119,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -265,7 +282,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -315,10 +335,12 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -329,10 +351,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -343,7 +364,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -361,7 +382,7 @@ CONFIG_C_AMBEN_ALL=y # EBIU_AMBCTL Control # CONFIG_BANK_0=0x7BB0 -CONFIG_BANK_1=0x5554 +CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0xFFC0 @@ -386,7 +407,6 @@ CONFIG_BINFMT_ZFLAT=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling @@ -400,11 +420,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -428,7 +443,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -452,7 +466,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -463,13 +479,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -484,22 +495,21 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m +CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -512,9 +522,9 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y @@ -526,9 +536,11 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -538,7 +550,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_GPIO_ADDR is not set +CONFIG_MTD_GPIO_ADDR=y # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -561,6 +573,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -586,12 +603,46 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -613,6 +664,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -623,9 +677,11 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -633,6 +689,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -641,7 +698,10 @@ CONFIG_BFIN_MAC_RMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -674,17 +734,13 @@ CONFIG_BFIN_MAC_RMII=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set -# CONFIG_BF5xx_EPPI is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m -CONFIG_SIMPLE_GPIO=m +# CONFIG_BFIN_TWI_LCD is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set # CONFIG_BFIN_JTAG_COMM is not set @@ -698,6 +754,7 @@ CONFIG_SIMPLE_GPIO=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -710,6 +767,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_OTP=y # CONFIG_BFIN_OTP_WRITE_ENABLE is not set @@ -758,13 +816,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -772,7 +826,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # @@ -780,17 +833,17 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # @@ -803,6 +856,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -829,11 +883,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -849,11 +905,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -885,6 +946,12 @@ CONFIG_BFIN_WDT=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -892,10 +959,14 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -931,20 +1002,20 @@ CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y +CONFIG_USB=m # CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y -CONFIG_USB_MON=y +CONFIG_USB_MON=m # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -952,24 +1023,24 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set -CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SOC=y # # Blackfin high speed USB Support # -CONFIG_USB_MUSB_HOST=y -# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y # CONFIG_USB_MUSB_OTG is not set -CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_MUSB_DEBUG is not set # @@ -981,18 +1052,31 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set # # USB port drivers @@ -1013,7 +1097,6 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1021,9 +1104,50 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2272 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1090,6 +1214,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1102,9 +1227,10 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1113,6 +1239,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1122,8 +1253,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1135,10 +1269,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1146,9 +1277,19 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1157,6 +1298,7 @@ CONFIG_SYSFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1167,7 +1309,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1182,9 +1323,9 @@ CONFIG_SMB_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -1208,7 +1349,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1235,55 +1376,34 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB_TESTCASE is not set CONFIG_DEBUG_VERBOSE=y -CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_MMRS is not set # CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1293,9 +1413,10 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CPLB_INFO is not set CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1304,9 +1425,9 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1385,6 +1506,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1392,20 +1514,24 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/CM-BF533_defconfig b/trunk/arch/blackfin/configs/CM-BF533_defconfig index ae665b93b875..df56639ab2f2 100644 --- a/trunk/arch/blackfin/configs/CM-BF533_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF533_defconfig @@ -1,94 +1,110 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,7 +112,7 @@ CONFIG_BLOCK=y CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set @@ -105,6 +121,7 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -113,6 +130,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -125,28 +146,38 @@ CONFIG_BF533=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=6 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y # CONFIG_BFIN533_EZKIT is not set # CONFIG_BFIN533_STAMP is not set +# CONFIG_BLACKSTAMP is not set CONFIG_BFIN533_BLUETECHNIX_CM=y # CONFIG_H8606_HVSISTEMAS is not set -# CONFIG_GENERIC_BF533_BOARD is not set +# CONFIG_BFIN532_IP0X is not set # # BF533/2/1 Specific Configuration @@ -188,6 +219,7 @@ CONFIG_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -207,13 +239,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=32 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -240,6 +279,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -248,12 +293,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -262,10 +311,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -276,7 +324,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -301,12 +349,8 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats @@ -315,22 +359,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -339,45 +380,13 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETLABEL is not set +# CONFIG_INET is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -385,31 +394,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -418,20 +419,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +447,15 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -460,6 +466,11 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -468,12 +479,16 @@ CONFIG_MTD_RAM=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_UCLINUX=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -489,36 +504,25 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # -# UBI - Unsorted block images +# LPDDR flash memory drivers # -# CONFIG_MTD_UBI is not set +# CONFIG_MTD_LPDDR is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -526,34 +530,19 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set -# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set -# CONFIG_DM9000 is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set # CONFIG_NETDEV_1000 is not set -# CONFIG_AX88180 is not set # CONFIG_NETDEV_10000 is not set # @@ -561,22 +550,17 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -593,16 +577,15 @@ CONFIG_SMC91X=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set -# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_DMA_INTERFACE is not set +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_BFIN_SPI_ADC is not set +# CONFIG_BFIN_SPORT is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -613,6 +596,7 @@ CONFIG_BFIN_SPORT=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -623,175 +607,140 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y # -# SPI support +# SPI Master Controller Drivers # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # -# Dallas's 1-wire bus +# SPI Protocol Masters # +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB support +# MMC/SD/SDIO Card Drivers # -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set - -# -# LED devices +# MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_FS_MBCACHE=y +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -801,8 +750,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -813,12 +765,8 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -826,60 +774,106 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -888,34 +882,39 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y - -# -# Cryptographic options -# +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/CM-BF537E_defconfig b/trunk/arch/blackfin/configs/CM-BF537E_defconfig index d74b6f4db35d..22e565c51d66 100644 --- a/trunk/arch/blackfin/configs/CM-BF537E_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF537E_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Wed Jun 3 06:27:41 2009 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -16,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -26,21 +29,40 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -49,7 +71,8 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set @@ -65,12 +88,13 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -78,11 +102,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -98,7 +119,6 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -181,7 +201,8 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set -CONFIG_BFIN537_BLUETECHNIX_CM=y +CONFIG_BFIN537_BLUETECHNIX_CM_E=y +# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set # CONFIG_BFIN537_BLUETECHNIX_TCM is not set # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set @@ -283,10 +304,12 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -297,10 +320,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -311,7 +333,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -337,6 +359,7 @@ CONFIG_BANK_3=0xFFC2 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # # Executable file formats @@ -366,11 +389,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -394,7 +412,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -418,7 +435,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -429,8 +448,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,16 +460,21 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -486,22 +510,26 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_GPIO_ADDR=y -CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -516,6 +544,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -533,9 +566,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -549,6 +587,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -570,6 +609,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -580,8 +622,11 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -598,7 +643,10 @@ CONFIG_BFIN_RX_DESC_NUM=20 # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -622,15 +670,12 @@ CONFIG_BFIN_RX_DESC_NUM=20 # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set # CONFIG_BFIN_JTAG_COMM is not set @@ -644,6 +689,7 @@ CONFIG_BFIN_SPORT=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -656,6 +702,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -668,7 +715,23 @@ CONFIG_UNIX98_PTYS=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y @@ -688,15 +751,21 @@ CONFIG_GPIO_SYSFS=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set @@ -758,21 +827,74 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=m +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -789,9 +911,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -800,6 +923,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -809,8 +937,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -822,10 +953,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -833,9 +961,19 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_YAFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -844,14 +982,70 @@ CONFIG_SYSFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -867,14 +1061,28 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_DEBUG_VERBOSE=y @@ -888,9 +1096,10 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -899,8 +1108,9 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -979,6 +1189,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -986,19 +1197,24 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/CM-BF537U_defconfig b/trunk/arch/blackfin/configs/CM-BF537U_defconfig index 7fc8dfa1719f..efcc90d2f345 100644 --- a/trunk/arch/blackfin/configs/CM-BF537U_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF537U_defconfig @@ -1,94 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -105,6 +122,7 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -113,6 +131,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -125,22 +147,31 @@ CONFIG_PREEMPT_NONE=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=2 +CONFIG_BF_REV_MAX=3 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 @@ -150,7 +181,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -169,11 +199,13 @@ CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set -CONFIG_BFIN537_BLUETECHNIX_CM=y +# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set +CONFIG_BFIN537_BLUETECHNIX_CM_U=y +# CONFIG_BFIN537_BLUETECHNIX_TCM is not set # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set -# CONFIG_GENERIC_BF537_BOARD is not set # # BF537 Specific Configuration @@ -196,6 +228,7 @@ CONFIG_IRQ_PROG_INTA=12 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -215,13 +248,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=32 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -248,6 +288,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -256,12 +302,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -270,10 +320,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -284,7 +333,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -309,12 +358,8 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats @@ -323,22 +368,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -347,10 +389,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -369,15 +407,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -386,6 +422,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -395,29 +432,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -426,20 +457,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -452,12 +485,15 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -468,20 +504,29 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_UCLINUX=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_GPIO_ADDR=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -497,36 +542,36 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # -# UBI - Unsorted block images +# LPDDR flash memory drivers # -# CONFIG_MTD_UBI is not set +# CONFIG_MTD_LPDDR is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# Misc devices +# EEPROM support # +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -534,35 +579,20 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_BFIN_MAC is not set -# CONFIG_SMSC911X is not set -# CONFIG_DM9000 is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set # CONFIG_NETDEV_1000 is not set -# CONFIG_AX88180 is not set # CONFIG_NETDEV_10000 is not set # @@ -570,22 +600,17 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -602,16 +627,15 @@ CONFIG_SMC91X=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -622,6 +646,7 @@ CONFIG_BFIN_SPORT=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -634,165 +659,201 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y # -# TPM devices +# SPI Master Controller Drivers # -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set -# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set CONFIG_USB_GADGET_NET2272=y CONFIG_USB_NET2272=y # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set -# CONFIG_USB_ETH is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # -# InfiniBand support +# OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD/SDIO Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Real Time Clock +# MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -802,24 +863,28 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -829,8 +894,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -841,12 +909,8 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -854,18 +918,29 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -873,41 +948,94 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -916,34 +1044,40 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y - -# -# Cryptographic options -# +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/CM-BF548_defconfig b/trunk/arch/blackfin/configs/CM-BF548_defconfig index acca4e51a45a..7f579cf51127 100644 --- a/trunk/arch/blackfin/configs/CM-BF548_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF548_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.4 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -16,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -26,79 +29,100 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_UID16=y +# CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -107,6 +131,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -119,19 +147,29 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set -CONFIG_BF548=y +# CONFIG_BF547M is not set +CONFIG_BF548_std=y +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set -CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_0_6 is not set +CONFIG_BF_REV_ANY=y # CONFIG_BF_REV_NONE is not set CONFIG_BF54x=y CONFIG_IRQ_PLL_WAKEUP=7 @@ -140,15 +178,12 @@ CONFIG_IRQ_SPORT0_RX=9 CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_SPI0=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_CNT=8 -CONFIG_IRQ_USB_INT0=11 -CONFIG_IRQ_USB_INT1=11 -CONFIG_IRQ_USB_INT2=11 -CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_TIMER0=11 CONFIG_IRQ_TIMER1=11 CONFIG_IRQ_TIMER2=11 @@ -157,9 +192,21 @@ CONFIG_IRQ_TIMER4=11 CONFIG_IRQ_TIMER5=11 CONFIG_IRQ_TIMER6=11 CONFIG_IRQ_TIMER7=11 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_TIMER8=11 CONFIG_IRQ_TIMER9=11 CONFIG_IRQ_TIMER10=11 +CONFIG_IRQ_SPORT2_RX=9 +CONFIG_IRQ_SPORT2_TX=9 +CONFIG_IRQ_SPORT3_RX=9 +CONFIG_IRQ_SPORT3_TX=9 +CONFIG_IRQ_SPI1=10 +CONFIG_IRQ_SPI2=10 +CONFIG_IRQ_TWI0=11 +CONFIG_IRQ_TWI1=11 # CONFIG_BFIN548_EZKIT is not set CONFIG_BFIN548_BLUETECHNIX_CM=y @@ -167,6 +214,7 @@ CONFIG_BFIN548_BLUETECHNIX_CM=y # BF548 Specific Configuration # # CONFIG_DEB_DMA_URGENT is not set +# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set # # Interrupt Priority Assignment @@ -182,7 +230,6 @@ CONFIG_IRQ_SPORT1_ERR=7 CONFIG_IRQ_SPI0_ERR=7 CONFIG_IRQ_UART0_ERR=7 CONFIG_IRQ_EPPI0=8 -CONFIG_IRQ_SPI0=10 CONFIG_IRQ_PINT0=12 CONFIG_IRQ_PINT1=12 CONFIG_IRQ_MDMAS0=13 @@ -197,18 +244,10 @@ CONFIG_IRQ_SPI2_ERR=7 CONFIG_IRQ_UART1_ERR=7 CONFIG_IRQ_UART2_ERR=7 CONFIG_IRQ_CAN0_ERR=7 -CONFIG_IRQ_SPORT2_RX=9 -CONFIG_IRQ_SPORT2_TX=9 -CONFIG_IRQ_SPORT3_RX=9 -CONFIG_IRQ_SPORT3_TX=9 CONFIG_IRQ_EPPI1=9 CONFIG_IRQ_EPPI2=9 -CONFIG_IRQ_SPI1=10 -CONFIG_IRQ_SPI2=10 CONFIG_IRQ_ATAPI_RX=10 CONFIG_IRQ_ATAPI_TX=10 -CONFIG_IRQ_TWI0=11 -CONFIG_IRQ_TWI1=11 CONFIG_IRQ_CAN0_RX=11 CONFIG_IRQ_CAN0_TX=11 CONFIG_IRQ_MDMAS2=13 @@ -255,6 +294,7 @@ CONFIG_PINT3_ASSIGN=0x02020303 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -274,16 +314,12 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_GENERIC_TIME is not set -# CONFIG_TICK_ONESHOT is not set # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=64 -# CONFIG_MEM_MT46V32M16_6T is not set -CONFIG_MEM_MT46V32M16_5B=y -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -310,6 +346,12 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -318,13 +360,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -333,14 +378,13 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y -CONFIG_BFIN_EXTMEM_WRITEBACK=y -# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_EXTMEM_WRITEBACK +CONFIG_BFIN_EXTMEM_WRITETHROUGH=y # CONFIG_BFIN_L2_DCACHEABLE is not set # @@ -349,7 +393,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -369,7 +413,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B2 +CONFIG_BANK_3=0x99B3 CONFIG_EBIU_MBSCTLVAL=0x0 CONFIG_EBIU_MODEVAL=0x1 CONFIG_EBIU_FCTLVAL=0x6 @@ -377,7 +421,6 @@ CONFIG_EBIU_FCTLVAL=0x6 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -388,23 +431,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -417,6 +456,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -435,19 +475,16 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -456,6 +493,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -465,24 +503,21 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -501,10 +536,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -539,6 +576,7 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set @@ -549,9 +587,8 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -574,6 +611,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -587,31 +629,31 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y +CONFIG_SCSI=m CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # -CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set @@ -632,29 +674,54 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set -CONFIG_SMSC911X=y # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -665,6 +732,10 @@ CONFIG_SMSC911X=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -676,7 +747,6 @@ CONFIG_SMSC911X=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -711,6 +781,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_BFIN is not set # CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -726,19 +797,16 @@ CONFIG_INPUT_KEYBOARD=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -# CONFIG_SIMPLE_GPIO is not set +# CONFIG_BFIN_TWI_LCD is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -749,10 +817,11 @@ CONFIG_BFIN_OTP=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -CONFIG_SERIAL_BFIN_DMA=y -# CONFIG_SERIAL_BFIN_PIO is not set +# CONFIG_SERIAL_BFIN_DMA is not set +CONFIG_SERIAL_BFIN_PIO=y # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set @@ -762,7 +831,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -770,61 +842,53 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_BLACKFIN_TWI=y -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -832,64 +896,23 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -903,25 +926,43 @@ CONFIG_BFIN_WDT=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set -# CONFIG_USB_DABUSB is not set # # Graphics support @@ -935,80 +976,75 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +# CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y +CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_MUSB_HDRC=y +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SOC=y # -# Blackfin BF54x, BF525 and BF527 high speed USB support +# Blackfin high speed USB Support # -CONFIG_USB_MUSB_HOST=y -# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y # CONFIG_USB_MUSB_OTG is not set -CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_USB_GADGET_MUSB_HDRC=y # CONFIG_MUSB_PIO_ONLY is not set -# CONFIG_USB_INVENTRA_DMA is not set +CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set -CONFIG_USB_MUSB_LOGLEVEL=0 +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # -CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1016,6 +1052,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1023,15 +1060,10 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1040,7 +1072,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1048,7 +1080,6 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1056,38 +1087,75 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -CONFIG_MMC=y +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2272 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +# CONFIG_USB_ETH_RNDIS is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # -CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # -CONFIG_SDH_BFIN=y +# CONFIG_MMC_SDHCI is not set +CONFIG_SDH_BFIN=m +# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set +# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set # CONFIG_MMC_SPI is not set -# CONFIG_SPI_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m # # RTC interfaces @@ -1111,66 +1179,74 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +CONFIG_RTC_DRV_BFIN=m +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_STAGING is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # @@ -1194,10 +1270,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1205,17 +1278,7 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set @@ -1227,34 +1290,30 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=y +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set @@ -1267,24 +1326,8 @@ CONFIG_CIFS=y # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1326,9 +1369,6 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1336,14 +1376,39 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set -CONFIG_DEBUG_MMRS=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1352,33 +1417,125 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/CM-BF561_defconfig b/trunk/arch/blackfin/configs/CM-BF561_defconfig index bae4ee6e68bb..a6df01dac98a 100644 --- a/trunk/arch/blackfin/configs/CM-BF561_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF561_defconfig @@ -1,15 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.4 -# Tue Apr 1 10:50:11 2008 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -17,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -27,62 +29,83 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -99,6 +122,7 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -107,6 +131,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -119,44 +147,56 @@ CONFIG_PREEMPT_NONE=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set CONFIG_BF561=y +# CONFIG_SMP is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=5 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BFIN_DUAL_CORE=y CONFIG_MEM_MT48LC8M32B2B5_7=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_SPORT0_ERROR=7 CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 CONFIG_IRQ_SPI_ERROR=7 # CONFIG_BFIN561_EZKIT is not set # CONFIG_BFIN561_TEPLA is not set CONFIG_BFIN561_BLUETECHNIX_CM=y -# CONFIG_GENERIC_BF561_BOARD is not set # # BF561 Specific Configuration # -# -# Core B Support -# - # # Core B Support # CONFIG_BF561_COREB=y -# CONFIG_BF561_COREB_RESET is not set # # Interrupt Priority Assignment @@ -196,14 +236,6 @@ CONFIG_IRQ_DMA2_8=9 CONFIG_IRQ_DMA2_9=9 CONFIG_IRQ_DMA2_10=9 CONFIG_IRQ_DMA2_11=9 -CONFIG_IRQ_TIMER0=10 -CONFIG_IRQ_TIMER1=10 -CONFIG_IRQ_TIMER2=10 -CONFIG_IRQ_TIMER3=10 -CONFIG_IRQ_TIMER4=10 -CONFIG_IRQ_TIMER5=10 -CONFIG_IRQ_TIMER6=10 -CONFIG_IRQ_TIMER7=10 CONFIG_IRQ_TIMER8=10 CONFIG_IRQ_TIMER9=10 CONFIG_IRQ_TIMER10=10 @@ -226,6 +258,7 @@ CONFIG_IRQ_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -245,19 +278,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=32 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -284,6 +318,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -292,14 +332,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -CONFIG_LARGE_ALLOCS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -308,15 +350,16 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y -CONFIG_BFIN_EXTMEM_WRITEBACK=y -# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_EXTMEM_WRITEBACK is not set +CONFIG_BFIN_EXTMEM_WRITETHROUGH=y # CONFIG_BFIN_L2_DCACHEABLE is not set +# CONFIG_BFIN_L2_WRITEBACK is not set +# CONFIG_BFIN_L2_WRITETHROUGH is not set # # Memory Protection Unit @@ -324,7 +367,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -353,8 +396,8 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # # Executable file formats @@ -363,18 +406,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # -# Networking +# CPU Frequency scaling # +# CONFIG_CPU_FREQ is not set CONFIG_NET=y # @@ -383,10 +427,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -407,14 +447,11 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -423,6 +460,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -432,24 +470,21 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -460,16 +495,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -487,8 +528,10 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -499,20 +542,29 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_UCLINUX=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -527,6 +579,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -539,14 +596,21 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set -# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE0 is not set -# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE1 is not set # # SCSI device support @@ -558,26 +622,50 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=m +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set -# CONFIG_AX88180 is not set # CONFIG_NETDEV_10000 is not set # @@ -585,10 +673,13 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -609,16 +700,15 @@ CONFIG_SMC91X=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -629,6 +719,7 @@ CONFIG_SMC91X=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -639,6 +730,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -647,54 +739,100 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -709,42 +847,85 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=m +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_STAGING is not set # # File systems @@ -754,24 +935,28 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -781,8 +966,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -794,10 +982,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -805,14 +990,28 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -827,11 +1026,47 @@ CONFIG_NETWORK_FILESYSTEMS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -839,14 +1074,40 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -855,33 +1116,40 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set -# CONFIG_DUAL_CORE_TEST_MODULE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/configs/H8606_defconfig b/trunk/arch/blackfin/configs/H8606_defconfig index a6a7c8ede705..bc7fae3d8b83 100644 --- a/trunk/arch/blackfin/configs/H8606_defconfig +++ b/trunk/arch/blackfin/configs/H8606_defconfig @@ -67,6 +67,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -249,6 +250,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y diff --git a/trunk/arch/blackfin/configs/IP0X_defconfig b/trunk/arch/blackfin/configs/IP0X_defconfig index 1ec9ae2e964b..a7e49d631229 100644 --- a/trunk/arch/blackfin/configs/IP0X_defconfig +++ b/trunk/arch/blackfin/configs/IP0X_defconfig @@ -68,6 +68,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -261,6 +262,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y diff --git a/trunk/arch/blackfin/configs/PNAV-10_defconfig b/trunk/arch/blackfin/configs/PNAV-10_defconfig index ff377fae061b..67d12768602a 100644 --- a/trunk/arch/blackfin/configs/PNAV-10_defconfig +++ b/trunk/arch/blackfin/configs/PNAV-10_defconfig @@ -63,6 +63,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -285,6 +286,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/trunk/arch/blackfin/configs/SRV1_defconfig b/trunk/arch/blackfin/configs/SRV1_defconfig index 814f9cacf407..52bfa6bf18da 100644 --- a/trunk/arch/blackfin/configs/SRV1_defconfig +++ b/trunk/arch/blackfin/configs/SRV1_defconfig @@ -72,6 +72,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -271,6 +272,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_DMA_UNCACHED_2M=y # CONFIG_DMA_UNCACHED_1M is not set # CONFIG_DMA_UNCACHED_NONE is not set @@ -700,7 +702,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # CONFIG_BF53X_PFBUTTONS is not set -# CONFIG_TWI_KEYPAD is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports diff --git a/trunk/arch/blackfin/configs/TCM-BF537_defconfig b/trunk/arch/blackfin/configs/TCM-BF537_defconfig index 375e75a27abc..60adfad54db9 100644 --- a/trunk/arch/blackfin/configs/TCM-BF537_defconfig +++ b/trunk/arch/blackfin/configs/TCM-BF537_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Jan 6 09:22:17 2009 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -16,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -26,49 +29,72 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -76,11 +102,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -96,7 +119,6 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -128,10 +150,15 @@ CONFIG_BF537=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=2 CONFIG_BF_REV_MAX=3 @@ -173,11 +200,11 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set CONFIG_BFIN537_BLUETECHNIX_TCM=y # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set -# CONFIG_GENERIC_BF537_BOARD is not set # # BF537 Specific Configuration @@ -223,7 +250,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -273,10 +303,12 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -287,10 +319,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -301,7 +332,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -327,6 +358,7 @@ CONFIG_BANK_3=0xFFC2 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # # Executable file formats @@ -343,13 +375,83 @@ CONFIG_BINFMT_SHARED_FLAT=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -358,15 +460,21 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -402,9 +510,10 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # @@ -413,7 +522,7 @@ CONFIG_MTD_RAM=y CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_GPIO_ADDR=y -CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # @@ -435,6 +544,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -443,15 +557,23 @@ CONFIG_MTD_UCLINUX=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -464,6 +586,74 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -480,15 +670,12 @@ CONFIG_HAVE_IDE=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_BFIN_DMA_INTERFACE=m -# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set # CONFIG_BFIN_JTAG_COMM is not set @@ -502,6 +689,7 @@ CONFIG_BFIN_DMA_INTERFACE=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -514,6 +702,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -534,39 +723,17 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -580,6 +747,12 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_BFIN_WDT=y +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -588,7 +761,7 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -598,6 +771,7 @@ CONFIG_BFIN_WDT=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # @@ -618,13 +792,81 @@ CONFIG_BFIN_WDT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -641,8 +883,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -651,6 +895,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -660,8 +909,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -673,10 +925,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -684,9 +933,19 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -695,13 +954,62 @@ CONFIG_SYSFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -714,12 +1022,30 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_DEBUG_VERBOSE=y @@ -733,9 +1059,10 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -744,20 +1071,110 @@ CONFIG_ACCESS_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/blackfin/include/asm/asm-offsets.h b/trunk/arch/blackfin/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/blackfin/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/blackfin/include/asm/bfin-global.h b/trunk/arch/blackfin/include/asm/bfin-global.h index 10064f902d20..e6485c305ea6 100644 --- a/trunk/arch/blackfin/include/asm/bfin-global.h +++ b/trunk/arch/blackfin/include/asm/bfin-global.h @@ -11,9 +11,6 @@ #ifndef __ASSEMBLY__ -#include -#include -#include #include #include @@ -23,6 +20,12 @@ # define DMA_UNCACHED_REGION (2 * 1024 * 1024) #elif defined(CONFIG_DMA_UNCACHED_1M) # define DMA_UNCACHED_REGION (1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_512K) +# define DMA_UNCACHED_REGION (512 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_256K) +# define DMA_UNCACHED_REGION (256 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_128K) +# define DMA_UNCACHED_REGION (128 * 1024) #else # define DMA_UNCACHED_REGION (0) #endif @@ -35,6 +38,7 @@ extern unsigned long get_sclk(void); extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); +struct pt_regs; extern void dump_bfin_process(struct pt_regs *regs); extern void dump_bfin_mem(struct pt_regs *regs); extern void dump_bfin_trace_buffer(void); diff --git a/trunk/arch/blackfin/include/asm/bfin-lq035q1.h b/trunk/arch/blackfin/include/asm/bfin-lq035q1.h new file mode 100644 index 000000000000..57bc21ac2296 --- /dev/null +++ b/trunk/arch/blackfin/include/asm/bfin-lq035q1.h @@ -0,0 +1,28 @@ +/* + * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02 + * + * Copyright 2008-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef BFIN_LQ035Q1_H +#define BFIN_LQ035Q1_H + +#define LQ035_RL (0 << 8) /* Right -> Left Scan */ +#define LQ035_LR (1 << 8) /* Left -> Right Scan */ +#define LQ035_TB (1 << 9) /* Top -> Botton Scan */ +#define LQ035_BT (0 << 9) /* Botton -> Top Scan */ +#define LQ035_BGR (1 << 11) /* Use BGR format */ +#define LQ035_RGB (0 << 11) /* Use RGB format */ +#define LQ035_NORM (1 << 13) /* Reversal */ +#define LQ035_REV (0 << 13) /* Reversal */ + +struct bfin_lq035q1fb_disp_info { + + unsigned mode; + /* GPIOs */ + int use_bl; + unsigned gpio_bl; +}; + +#endif /* BFIN_LQ035Q1_H */ diff --git a/trunk/arch/blackfin/include/asm/bug.h b/trunk/arch/blackfin/include/asm/bug.h index 6f4548a13555..75f6dc336d46 100644 --- a/trunk/arch/blackfin/include/asm/bug.h +++ b/trunk/arch/blackfin/include/asm/bug.h @@ -47,7 +47,7 @@ #define BUG() \ do { \ _BUG_OR_WARN(0); \ - for (;;); \ + unreachable(); \ } while (0) #define WARN_ON(condition) \ diff --git a/trunk/arch/blackfin/include/asm/cacheflush.h b/trunk/arch/blackfin/include/asm/cacheflush.h index 417eaac7fe99..2666ff8ea952 100644 --- a/trunk/arch/blackfin/include/asm/cacheflush.h +++ b/trunk/arch/blackfin/include/asm/cacheflush.h @@ -10,6 +10,7 @@ #define _BLACKFIN_CACHEFLUSH_H #include /* for SSYNC() */ +#include /* for _ramend */ extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address); diff --git a/trunk/arch/blackfin/include/asm/checksum.h b/trunk/arch/blackfin/include/asm/checksum.h index a23415be0de1..623cc7fb00bc 100644 --- a/trunk/arch/blackfin/include/asm/checksum.h +++ b/trunk/arch/blackfin/include/asm/checksum.h @@ -8,64 +8,13 @@ #ifndef _BFIN_CHECKSUM_H #define _BFIN_CHECKSUM_H -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy(const void *src, void *dst, - int len, __wsum sum); - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err); - -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy((src), (dst), (len), (sum)) - -__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - while (sum >> 16) - sum = (sum & 0xffff) + (sum >> 16); - return ((~(sum << 16)) >> 16); -} - /* * computes the checksum of the TCP/UDP pseudo-header * returns a 16-bit checksum, already complemented */ static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, +__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { unsigned int carry; @@ -88,19 +37,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, return (sum); } +#define csum_tcpudp_nofold __csum_tcpudp_nofold -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -extern __sum16 ip_compute_csum(const void *buff, int len); +#include -#endif /* _BFIN_CHECKSUM_H */ +#endif diff --git a/trunk/arch/blackfin/include/asm/clocks.h b/trunk/arch/blackfin/include/asm/clocks.h index f80dad5ff257..6f0b61852f58 100644 --- a/trunk/arch/blackfin/include/asm/clocks.h +++ b/trunk/arch/blackfin/include/asm/clocks.h @@ -9,6 +9,8 @@ #ifndef _BFIN_CLOCKS_H #define _BFIN_CLOCKS_H +#include + #ifdef CONFIG_CCLK_DIV_1 # define CONFIG_CCLK_ACT_DIV CCLK_DIV1 # define CONFIG_CCLK_DIV 1 diff --git a/trunk/arch/blackfin/include/asm/dma-mapping.h b/trunk/arch/blackfin/include/asm/dma-mapping.h index 7a23d824ac96..f9172ff30e5c 100644 --- a/trunk/arch/blackfin/include/asm/dma-mapping.h +++ b/trunk/arch/blackfin/include/asm/dma-mapping.h @@ -7,9 +7,9 @@ #ifndef _BLACKFIN_DMA_MAPPING_H #define _BLACKFIN_DMA_MAPPING_H -#include +#include +struct scatterlist; -void dma_alloc_init(unsigned long start, unsigned long end); void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, @@ -20,13 +20,51 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, */ #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_supported(d, m) (1) +#define dma_get_cache_alignment() (32) +#define dma_is_consistent(d, h) (1) -static inline -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +static inline int +dma_set_mask(struct device *dev, u64 dma_mask) { + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + return 0; } +static inline int +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +extern void +__dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir); +static inline void +_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) +{ + if (!__builtin_constant_p(dir)) { + __dma_sync(addr, size, dir); + return; + } + + switch (dir) { + case DMA_NONE: + BUG(); + case DMA_TO_DEVICE: /* writeback only */ + flush_dcache_range(addr, addr + size); + break; + case DMA_FROM_DEVICE: /* invalidate only */ + case DMA_BIDIRECTIONAL: /* flush and invalidate */ + /* Blackfin has no dedicated invalidate (it includes a flush) */ + invalidate_dcache_range(addr, addr + size); + break; + } +} + /* * Map a single buffer of the indicated size for DMA in streaming mode. * The 32-bit bus address to use is returned. @@ -34,8 +72,13 @@ int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) * Once the device is given the dma address, the device owns this memory * until either pci_unmap_single or pci_dma_sync_single is performed. */ -extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction); +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction dir) +{ + _dma_sync((dma_addr_t)ptr, size, dir); + return (dma_addr_t) ptr; +} static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, @@ -53,8 +96,12 @@ dma_map_page(struct device *dev, struct page *page, * After this call, reads by the cpu to the buffer are guarenteed to see * whatever the device wrote there. */ -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction); +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); +} static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, @@ -80,38 +127,66 @@ dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, * the same here. */ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction); + enum dma_data_direction dir); /* * Unmap a set of streaming mode DMA translations. * Again, cpu read rules concerning calls here are the same as for * pci_unmap_single() above. */ -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction); +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); +} -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t handle, size_t size, - enum dma_data_direction dir) +static inline void +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) { + BUG_ON(!valid_dma_direction(dir)); } -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t handle, size_t size, - enum dma_data_direction dir) +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) { + _dma_sync(handle + offset, size, dir); } -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, - int nents, enum dma_data_direction dir) +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) { + dma_sync_single_range_for_cpu(dev, handle, 0, size, dir); } -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, - int nents, enum dma_data_direction dir) +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_device(dev, handle, 0, size, dir); +} + +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); +} + +extern void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir); + +static inline void +dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir) { + _dma_sync((dma_addr_t)vaddr, size, dir); } #endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/trunk/arch/blackfin/include/asm/dma.h b/trunk/arch/blackfin/include/asm/dma.h index c9a59622e23f..bd2e62243abe 100644 --- a/trunk/arch/blackfin/include/asm/dma.h +++ b/trunk/arch/blackfin/include/asm/dma.h @@ -10,46 +10,70 @@ #include #include +#include #include #include - -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/***************************************************************************** -* Generic DMA Declarations -* -****************************************************************************/ -enum dma_chan_status { - DMA_CHANNEL_FREE, - DMA_CHANNEL_REQUESTED, - DMA_CHANNEL_ENABLED, -}; +#include + +/* DMA_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0f00 /* Next Descriptor Size */ +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMA_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ /*------------------------- * config reg bits value *-------------------------*/ -#define DATA_SIZE_8 0 -#define DATA_SIZE_16 1 -#define DATA_SIZE_32 2 +#define DATA_SIZE_8 0 +#define DATA_SIZE_16 1 +#define DATA_SIZE_32 2 -#define DMA_FLOW_STOP 0 -#define DMA_FLOW_AUTO 1 -#define DMA_FLOW_ARRAY 4 -#define DMA_FLOW_SMALL 6 -#define DMA_FLOW_LARGE 7 +#define DMA_FLOW_STOP 0 +#define DMA_FLOW_AUTO 1 +#define DMA_FLOW_ARRAY 4 +#define DMA_FLOW_SMALL 6 +#define DMA_FLOW_LARGE 7 -#define DIMENSION_LINEAR 0 -#define DIMENSION_2D 1 +#define DIMENSION_LINEAR 0 +#define DIMENSION_2D 1 -#define DIR_READ 0 -#define DIR_WRITE 1 +#define DIR_READ 0 +#define DIR_WRITE 1 -#define INTR_DISABLE 0 -#define INTR_ON_BUF 2 -#define INTR_ON_ROW 3 +#define INTR_DISABLE 0 +#define INTR_ON_BUF 2 +#define INTR_ON_ROW 3 #define DMA_NOSYNC_KEEP_DMA_BUF 0 -#define DMA_SYNC_RESTART 1 +#define DMA_SYNC_RESTART 1 struct dmasg { void *next_desc_addr; @@ -104,11 +128,9 @@ struct dma_register { }; -struct mutex; struct dma_channel { - struct mutex dmalock; const char *device_id; - enum dma_chan_status chan_status; + atomic_t chan_status; volatile struct dma_register *regs; struct dmasg *sg; /* large mode descriptor */ unsigned int irq; @@ -220,27 +242,20 @@ static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize static inline int dma_channel_active(unsigned int channel) { - if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) - return 0; - else - return 1; + return atomic_read(&dma_ch[channel].chan_status); } static inline void disable_dma(unsigned int channel) { dma_ch[channel].regs->cfg &= ~DMAEN; SSYNC(); - dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; } static inline void enable_dma(unsigned int channel) { dma_ch[channel].regs->curr_x_count = 0; dma_ch[channel].regs->curr_y_count = 0; dma_ch[channel].regs->cfg |= DMAEN; - dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED; } -void free_dma(unsigned int channel); -int request_dma(unsigned int channel, const char *device_id); int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data); static inline void dma_disable_irq(unsigned int channel) diff --git a/trunk/arch/blackfin/include/asm/dpmc.h b/trunk/arch/blackfin/include/asm/dpmc.h index 925e66cb2d49..1597ae5041ee 100644 --- a/trunk/arch/blackfin/include/asm/dpmc.h +++ b/trunk/arch/blackfin/include/asm/dpmc.h @@ -1,7 +1,7 @@ /* * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver * - * Copyright (C) 2004-2008 Analog Device Inc. + * Copyright (C) 2004-2009 Analog Device Inc. * * Licensed under the GPL-2 */ @@ -9,7 +9,109 @@ #ifndef _BLACKFIN_DPMC_H_ #define _BLACKFIN_DPMC_H_ -#ifdef __KERNEL__ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#ifdef __ADSPBF539__ +# define IN_DELAY 0x0014 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x00C0 /* Add 200ps Delay To EBIU Output Signals */ +#else +# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#endif +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +#define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ + +#define CCLK_DIV1 CSEL_DIV1 +#define CCLK_DIV2 CSEL_DIV2 +#define CCLK_DIV4 CSEL_DIV4 +#define CCLK_DIV8 CSEL_DIV8 + +#define SET_SSEL(x) ((x) & 0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +#define RTCWS 0x0400 /* RTC/Reset Wake-Up Status */ +#define CANWS 0x0800 /* CAN Wake-Up Status */ +#define USBWS 0x2000 /* USB Wake-Up Status */ +#define KPADWS 0x4000 /* Keypad Wake-Up Status */ +#define ROTWS 0x8000 /* Rotary Wake-Up Status */ +#define GPWS 0x1000 /* General-Purpose Wake-Up Status */ + +/* VR_CTL Masks */ +#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__) +#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ +#define FREQ_1000 0x3000 /* Switching Frequency Is 1 MHz */ +#else +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ +#endif +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 1 */ +#define GAIN_20 0x0008 /* GAIN = 2 */ +#define GAIN_50 0x000C /* GAIN = 5 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#ifdef __ADSPBF52x__ +#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x0080 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x0090 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#else +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ +#endif + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define GPWE 0x0400 /* General-Purpose Wake-Up Enable */ +#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */ +#define KPADWE 0x1000 /* Keypad Wake-Up Enable */ +#define ROTWE 0x2000 /* Rotary Wake-Up Enable */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + +#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__) +#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ +#else +#define USBWE 0x0800 /* Enable USB Wakeup From Hibernate */ +#endif + #ifndef __ASSEMBLY__ void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); @@ -54,6 +156,5 @@ struct bfin_dpmc_platform_data { w[P0 + (x - PLL_CTL)] = R0;\ #endif -#endif /* __KERNEL__ */ #endif /*_BLACKFIN_DPMC_H_*/ diff --git a/trunk/arch/blackfin/include/asm/elf.h b/trunk/arch/blackfin/include/asm/elf.h index 8e0764c81eaf..5b50f0ecacf8 100644 --- a/trunk/arch/blackfin/include/asm/elf.h +++ b/trunk/arch/blackfin/include/asm/elf.h @@ -55,7 +55,6 @@ do { \ _regs->p2 = _dynamic_addr; \ } while(0) -#define USE_ELF_CORE_DUMP #define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC #define ELF_EXEC_PAGESIZE 4096 diff --git a/trunk/arch/blackfin/include/asm/gpio.h b/trunk/arch/blackfin/include/asm/gpio.h index 5b44d05ca53e..539468a05057 100644 --- a/trunk/arch/blackfin/include/asm/gpio.h +++ b/trunk/arch/blackfin/include/asm/gpio.h @@ -159,6 +159,11 @@ struct gpio_port_t { }; #endif +#ifdef BFIN_SPECIAL_GPIO_BANKS +void bfin_special_gpio_free(unsigned gpio); +int bfin_special_gpio_request(unsigned gpio, const char *label); +#endif + #ifdef CONFIG_PM unsigned int bfin_pm_standby_setup(void); diff --git a/trunk/arch/blackfin/include/asm/gptimers.h b/trunk/arch/blackfin/include/asm/gptimers.h index 89f08decb8e0..c722acdda0d3 100644 --- a/trunk/arch/blackfin/include/asm/gptimers.h +++ b/trunk/arch/blackfin/include/asm/gptimers.h @@ -172,25 +172,25 @@ /* The actual gptimer API */ -void set_gptimer_pwidth(int timer_id, uint32_t width); -uint32_t get_gptimer_pwidth(int timer_id); -void set_gptimer_period(int timer_id, uint32_t period); -uint32_t get_gptimer_period(int timer_id); -uint32_t get_gptimer_count(int timer_id); -int get_gptimer_intr(int timer_id); -void clear_gptimer_intr(int timer_id); -int get_gptimer_over(int timer_id); -void clear_gptimer_over(int timer_id); -void set_gptimer_config(int timer_id, uint16_t config); -uint16_t get_gptimer_config(int timer_id); -int get_gptimer_run(int timer_id); -void set_gptimer_pulse_hi(int timer_id); -void clear_gptimer_pulse_hi(int timer_id); +void set_gptimer_pwidth(unsigned int timer_id, uint32_t width); +uint32_t get_gptimer_pwidth(unsigned int timer_id); +void set_gptimer_period(unsigned int timer_id, uint32_t period); +uint32_t get_gptimer_period(unsigned int timer_id); +uint32_t get_gptimer_count(unsigned int timer_id); +int get_gptimer_intr(unsigned int timer_id); +void clear_gptimer_intr(unsigned int timer_id); +int get_gptimer_over(unsigned int timer_id); +void clear_gptimer_over(unsigned int timer_id); +void set_gptimer_config(unsigned int timer_id, uint16_t config); +uint16_t get_gptimer_config(unsigned int timer_id); +int get_gptimer_run(unsigned int timer_id); +void set_gptimer_pulse_hi(unsigned int timer_id); +void clear_gptimer_pulse_hi(unsigned int timer_id); void enable_gptimers(uint16_t mask); void disable_gptimers(uint16_t mask); void disable_gptimers_sync(uint16_t mask); uint16_t get_enabled_gptimers(void); -uint32_t get_gptimer_status(int group); -void set_gptimer_status(int group, uint32_t value); +uint32_t get_gptimer_status(unsigned int group); +void set_gptimer_status(unsigned int group, uint32_t value); #endif diff --git a/trunk/arch/blackfin/include/asm/io.h b/trunk/arch/blackfin/include/asm/io.h index d1f5029189a7..29e55b9d88bc 100644 --- a/trunk/arch/blackfin/include/asm/io.h +++ b/trunk/arch/blackfin/include/asm/io.h @@ -31,12 +31,14 @@ static inline unsigned char readb(const volatile void __iomem *addr) unsigned int val; int tmp; - __asm__ __volatile__ ("cli %1;\n\t" - "NOP; NOP; SSYNC;\n\t" - "%0 = b [%2] (z);\n\t" - "sti %1;\n\t" - : "=d"(val), "=d"(tmp): "a"(addr) - ); + __asm__ __volatile__ ( + "cli %1;" + "NOP; NOP; SSYNC;" + "%0 = b [%2] (z);" + "sti %1;" + : "=d"(val), "=d"(tmp) + : "a"(addr) + ); return (unsigned char) val; } @@ -46,12 +48,14 @@ static inline unsigned short readw(const volatile void __iomem *addr) unsigned int val; int tmp; - __asm__ __volatile__ ("cli %1;\n\t" - "NOP; NOP; SSYNC;\n\t" - "%0 = w [%2] (z);\n\t" - "sti %1;\n\t" - : "=d"(val), "=d"(tmp): "a"(addr) - ); + __asm__ __volatile__ ( + "cli %1;" + "NOP; NOP; SSYNC;" + "%0 = w [%2] (z);" + "sti %1;" + : "=d"(val), "=d"(tmp) + : "a"(addr) + ); return (unsigned short) val; } @@ -61,20 +65,23 @@ static inline unsigned int readl(const volatile void __iomem *addr) unsigned int val; int tmp; - __asm__ __volatile__ ("cli %1;\n\t" - "NOP; NOP; SSYNC;\n\t" - "%0 = [%2];\n\t" - "sti %1;\n\t" - : "=d"(val), "=d"(tmp): "a"(addr) - ); + __asm__ __volatile__ ( + "cli %1;" + "NOP; NOP; SSYNC;" + "%0 = [%2];" + "sti %1;" + : "=d"(val), "=d"(tmp) + : "a"(addr) + ); + return val; } #endif /* __ASSEMBLY__ */ -#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) +#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) #define __raw_readb readb #define __raw_readw readw @@ -82,9 +89,9 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define __raw_writeb writeb #define __raw_writew writew #define __raw_writel writel -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) +#define memset_io(a, b, c) memset((void *)(a), (b), (c)) +#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) +#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) /* Convert "I/O port addresses" to actual addresses. i.e. ugly casts. */ #define __io(port) ((void *)(unsigned long)(port)) @@ -92,30 +99,30 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define inb(port) readb(__io(port)) #define inw(port) readw(__io(port)) #define inl(port) readl(__io(port)) -#define outb(x,port) writeb(x,__io(port)) -#define outw(x,port) writew(x,__io(port)) -#define outl(x,port) writel(x,__io(port)) +#define outb(x, port) writeb(x, __io(port)) +#define outw(x, port) writew(x, __io(port)) +#define outl(x, port) writel(x, __io(port)) #define inb_p(port) inb(__io(port)) #define inw_p(port) inw(__io(port)) #define inl_p(port) inl(__io(port)) -#define outb_p(x,port) outb(x,__io(port)) -#define outw_p(x,port) outw(x,__io(port)) -#define outl_p(x,port) outl(x,__io(port)) - -#define ioread8_rep(a,d,c) readsb(a,d,c) -#define ioread16_rep(a,d,c) readsw(a,d,c) -#define ioread32_rep(a,d,c) readsl(a,d,c) -#define iowrite8_rep(a,s,c) writesb(a,s,c) -#define iowrite16_rep(a,s,c) writesw(a,s,c) -#define iowrite32_rep(a,s,c) writesl(a,s,c) - -#define ioread8(X) readb(X) -#define ioread16(X) readw(X) -#define ioread32(X) readl(X) -#define iowrite8(val,X) writeb(val,X) -#define iowrite16(val,X) writew(val,X) -#define iowrite32(val,X) writel(val,X) +#define outb_p(x, port) outb(x, __io(port)) +#define outw_p(x, port) outw(x, __io(port)) +#define outl_p(x, port) outl(x, __io(port)) + +#define ioread8_rep(a, d, c) readsb(a, d, c) +#define ioread16_rep(a, d, c) readsw(a, d, c) +#define ioread32_rep(a, d, c) readsl(a, d, c) +#define iowrite8_rep(a, s, c) writesb(a, s, c) +#define iowrite16_rep(a, s, c) writesw(a, s, c) +#define iowrite32_rep(a, s, c) writesl(a, s, c) + +#define ioread8(x) readb(x) +#define ioread16(x) readw(x) +#define ioread32(x) readl(x) +#define iowrite8(val, x) writeb(val, x) +#define iowrite16(val, x) writew(val, x) +#define iowrite32(val, x) writel(val, x) #define mmiowb() wmb() diff --git a/trunk/arch/blackfin/include/asm/ipipe.h b/trunk/arch/blackfin/include/asm/ipipe.h index 4617ba66278f..d3b40449ca0e 100644 --- a/trunk/arch/blackfin/include/asm/ipipe.h +++ b/trunk/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include #include -#define IPIPE_ARCH_STRING "1.11-00" +#define IPIPE_ARCH_STRING "1.12-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 11 +#define IPIPE_MINOR_NUMBER 12 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP @@ -124,16 +124,6 @@ static inline int __ipipe_check_tickdev(const char *devname) return 1; } -static inline void __ipipe_lock_root(void) -{ - set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); -} - -static inline void __ipipe_unlock_root(void) -{ - clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); -} - void __ipipe_enable_pipeline(void); #define __ipipe_hook_critical_ipi(ipd) do { } while (0) diff --git a/trunk/arch/blackfin/include/asm/ipipe_base.h b/trunk/arch/blackfin/include/asm/ipipe_base.h index 490098f532a7..00409201d9ed 100644 --- a/trunk/arch/blackfin/include/asm/ipipe_base.h +++ b/trunk/arch/blackfin/include/asm/ipipe_base.h @@ -51,23 +51,15 @@ extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ -#define __ipipe_stall_root() \ - do { \ - volatile unsigned long *p = &__ipipe_root_status; \ - set_bit(0, p); \ - } while (0) - -#define __ipipe_test_and_stall_root() \ - ({ \ - volatile unsigned long *p = &__ipipe_root_status; \ - test_and_set_bit(0, p); \ - }) - -#define __ipipe_test_root() \ - ({ \ - const unsigned long *p = &__ipipe_root_status; \ - test_bit(0, p); \ - }) +void __ipipe_stall_root(void); + +unsigned long __ipipe_test_and_stall_root(void); + +unsigned long __ipipe_test_root(void); + +void __ipipe_lock_root(void); + +void __ipipe_unlock_root(void); #endif /* !__ASSEMBLY__ */ diff --git a/trunk/arch/blackfin/include/asm/irqflags.h b/trunk/arch/blackfin/include/asm/irqflags.h index 9b19a19d9ae9..813a1af3e865 100644 --- a/trunk/arch/blackfin/include/asm/irqflags.h +++ b/trunk/arch/blackfin/include/asm/irqflags.h @@ -33,6 +33,7 @@ static inline unsigned long bfin_cli(void) #ifdef CONFIG_IPIPE +#include #include #include @@ -49,12 +50,12 @@ static inline unsigned long bfin_cli(void) barrier(); \ } while (0) -static inline void raw_local_irq_enable(void) -{ - barrier(); - ipipe_check_context(ipipe_root_domain); - __ipipe_unstall_root(); -} +#define raw_local_irq_enable() \ + do { \ + barrier(); \ + ipipe_check_context(ipipe_root_domain); \ + __ipipe_unstall_root(); \ + } while (0) #define raw_local_save_flags_ptr(x) \ do { \ diff --git a/trunk/arch/blackfin/include/asm/kgdb.h b/trunk/arch/blackfin/include/asm/kgdb.h index c8b256d2ea30..8651afe12990 100644 --- a/trunk/arch/blackfin/include/asm/kgdb.h +++ b/trunk/arch/blackfin/include/asm/kgdb.h @@ -10,9 +10,6 @@ #include -/* gdb locks */ -#define KGDB_MAX_NO_CPUS 8 - /* * BUFMAX defines the maximum number of characters in inbound/outbound buffers. * At least NUMREGBYTES*2 are needed for register packets. diff --git a/trunk/arch/blackfin/include/asm/mem_init.h b/trunk/arch/blackfin/include/asm/mem_init.h index 4179e329b9c9..7c8fe834ff22 100644 --- a/trunk/arch/blackfin/include/asm/mem_init.h +++ b/trunk/arch/blackfin/include/asm/mem_init.h @@ -295,156 +295,3 @@ #else #define PLL_BYPASS 0 #endif - -/***************************************Currently Not Being Used *********************************/ - -#if defined(CONFIG_FLASH_SPEED_BWAT) && \ -defined(CONFIG_FLASH_SPEED_BRAT) && \ -defined(CONFIG_FLASH_SPEED_BHT) && \ -defined(CONFIG_FLASH_SPEED_BST) && \ -defined(CONFIG_FLASH_SPEED_BTT) - -#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) -#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 - -#if (flash_EBIU_AMBCTL_TT > 3) -#define flash_EBIU_AMBCTL0_TT B0TT_4 -#endif -#if (flash_EBIU_AMBCTL_TT == 3) -#define flash_EBIU_AMBCTL0_TT B0TT_3 -#endif -#if (flash_EBIU_AMBCTL_TT == 2) -#define flash_EBIU_AMBCTL0_TT B0TT_2 -#endif -#if (flash_EBIU_AMBCTL_TT < 2) -#define flash_EBIU_AMBCTL0_TT B0TT_1 -#endif - -#if (flash_EBIU_AMBCTL_ST > 3) -#define flash_EBIU_AMBCTL0_ST B0ST_4 -#endif -#if (flash_EBIU_AMBCTL_ST == 3) -#define flash_EBIU_AMBCTL0_ST B0ST_3 -#endif -#if (flash_EBIU_AMBCTL_ST == 2) -#define flash_EBIU_AMBCTL0_ST B0ST_2 -#endif -#if (flash_EBIU_AMBCTL_ST < 2) -#define flash_EBIU_AMBCTL0_ST B0ST_1 -#endif - -#if (flash_EBIU_AMBCTL_HT > 2) -#define flash_EBIU_AMBCTL0_HT B0HT_3 -#endif -#if (flash_EBIU_AMBCTL_HT == 2) -#define flash_EBIU_AMBCTL0_HT B0HT_2 -#endif -#if (flash_EBIU_AMBCTL_HT == 1) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) -#define flash_EBIU_AMBCTL0_HT B0HT_0 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif - -#if (flash_EBIU_AMBCTL_WAT > 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_15 -#endif -#if (flash_EBIU_AMBCTL_WAT == 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_14 -#endif -#if (flash_EBIU_AMBCTL_WAT == 13) -#define flash_EBIU_AMBCTL0_WAT B0WAT_13 -#endif -#if (flash_EBIU_AMBCTL_WAT == 12) -#define flash_EBIU_AMBCTL0_WAT B0WAT_12 -#endif -#if (flash_EBIU_AMBCTL_WAT == 11) -#define flash_EBIU_AMBCTL0_WAT B0WAT_11 -#endif -#if (flash_EBIU_AMBCTL_WAT == 10) -#define flash_EBIU_AMBCTL0_WAT B0WAT_10 -#endif -#if (flash_EBIU_AMBCTL_WAT == 9) -#define flash_EBIU_AMBCTL0_WAT B0WAT_9 -#endif -#if (flash_EBIU_AMBCTL_WAT == 8) -#define flash_EBIU_AMBCTL0_WAT B0WAT_8 -#endif -#if (flash_EBIU_AMBCTL_WAT == 7) -#define flash_EBIU_AMBCTL0_WAT B0WAT_7 -#endif -#if (flash_EBIU_AMBCTL_WAT == 6) -#define flash_EBIU_AMBCTL0_WAT B0WAT_6 -#endif -#if (flash_EBIU_AMBCTL_WAT == 5) -#define flash_EBIU_AMBCTL0_WAT B0WAT_5 -#endif -#if (flash_EBIU_AMBCTL_WAT == 4) -#define flash_EBIU_AMBCTL0_WAT B0WAT_4 -#endif -#if (flash_EBIU_AMBCTL_WAT == 3) -#define flash_EBIU_AMBCTL0_WAT B0WAT_3 -#endif -#if (flash_EBIU_AMBCTL_WAT == 2) -#define flash_EBIU_AMBCTL0_WAT B0WAT_2 -#endif -#if (flash_EBIU_AMBCTL_WAT == 1) -#define flash_EBIU_AMBCTL0_WAT B0WAT_1 -#endif - -#if (flash_EBIU_AMBCTL_RAT > 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_15 -#endif -#if (flash_EBIU_AMBCTL_RAT == 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_14 -#endif -#if (flash_EBIU_AMBCTL_RAT == 13) -#define flash_EBIU_AMBCTL0_RAT B0RAT_13 -#endif -#if (flash_EBIU_AMBCTL_RAT == 12) -#define flash_EBIU_AMBCTL0_RAT B0RAT_12 -#endif -#if (flash_EBIU_AMBCTL_RAT == 11) -#define flash_EBIU_AMBCTL0_RAT B0RAT_11 -#endif -#if (flash_EBIU_AMBCTL_RAT == 10) -#define flash_EBIU_AMBCTL0_RAT B0RAT_10 -#endif -#if (flash_EBIU_AMBCTL_RAT == 9) -#define flash_EBIU_AMBCTL0_RAT B0RAT_9 -#endif -#if (flash_EBIU_AMBCTL_RAT == 8) -#define flash_EBIU_AMBCTL0_RAT B0RAT_8 -#endif -#if (flash_EBIU_AMBCTL_RAT == 7) -#define flash_EBIU_AMBCTL0_RAT B0RAT_7 -#endif -#if (flash_EBIU_AMBCTL_RAT == 6) -#define flash_EBIU_AMBCTL0_RAT B0RAT_6 -#endif -#if (flash_EBIU_AMBCTL_RAT == 5) -#define flash_EBIU_AMBCTL0_RAT B0RAT_5 -#endif -#if (flash_EBIU_AMBCTL_RAT == 4) -#define flash_EBIU_AMBCTL0_RAT B0RAT_4 -#endif -#if (flash_EBIU_AMBCTL_RAT == 3) -#define flash_EBIU_AMBCTL0_RAT B0RAT_3 -#endif -#if (flash_EBIU_AMBCTL_RAT == 2) -#define flash_EBIU_AMBCTL0_RAT B0RAT_2 -#endif -#if (flash_EBIU_AMBCTL_RAT == 1) -#define flash_EBIU_AMBCTL0_RAT B0RAT_1 -#endif - -#define flash_EBIU_AMBCTL0 \ - (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ - flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) -#endif diff --git a/trunk/arch/blackfin/include/asm/mmu_context.h b/trunk/arch/blackfin/include/asm/mmu_context.h index 4a3be376ad5b..ae8ef4ffd806 100644 --- a/trunk/arch/blackfin/include/asm/mmu_context.h +++ b/trunk/arch/blackfin/include/asm/mmu_context.h @@ -66,8 +66,8 @@ activate_l1stack(struct mm_struct *mm, unsigned long sp_base) #define activate_mm(prev, next) switch_mm(prev, next, NULL) -static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, - struct task_struct *tsk) +static inline void __switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, + struct task_struct *tsk) { #ifdef CONFIG_MPU unsigned int cpu = smp_processor_id(); @@ -95,7 +95,24 @@ static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_m #endif } +#ifdef CONFIG_IPIPE +#define lock_mm_switch(flags) local_irq_save_hw_cond(flags) +#define unlock_mm_switch(flags) local_irq_restore_hw_cond(flags) +#else +#define lock_mm_switch(flags) do { (void)(flags); } while (0) +#define unlock_mm_switch(flags) do { (void)(flags); } while (0) +#endif /* CONFIG_IPIPE */ + #ifdef CONFIG_MPU +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned long flags; + lock_mm_switch(flags); + __switch_mm(prev, next, tsk); + unlock_mm_switch(flags); +} + static inline void protect_page(struct mm_struct *mm, unsigned long addr, unsigned long flags) { @@ -128,6 +145,12 @@ static inline void update_protections(struct mm_struct *mm) set_mask_dcplbs(mm->context.page_rwx_mask, cpu); } } +#else /* !CONFIG_MPU */ +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + __switch_mm(prev, next, tsk); +} #endif static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) @@ -173,4 +196,10 @@ static inline void destroy_context(struct mm_struct *mm) #endif } +#define ipipe_mm_switch_protect(flags) \ + local_irq_save_hw_cond(flags) + +#define ipipe_mm_switch_unprotect(flags) \ + local_irq_restore_hw_cond(flags) + #endif diff --git a/trunk/arch/blackfin/include/asm/module.h b/trunk/arch/blackfin/include/asm/module.h index 9c1cfffddd9b..4282b169ead9 100644 --- a/trunk/arch/blackfin/include/asm/module.h +++ b/trunk/arch/blackfin/include/asm/module.h @@ -7,8 +7,6 @@ #ifndef _ASM_BFIN_MODULE_H #define _ASM_BFIN_MODULE_H -#define MODULE_SYMBOL_PREFIX "_" - #define Elf_Shdr Elf32_Shdr #define Elf_Sym Elf32_Sym #define Elf_Ehdr Elf32_Ehdr diff --git a/trunk/arch/blackfin/include/asm/pci.h b/trunk/arch/blackfin/include/asm/pci.h index 61277358c865..99cae2e3bac7 100644 --- a/trunk/arch/blackfin/include/asm/pci.h +++ b/trunk/arch/blackfin/include/asm/pci.h @@ -4,145 +4,19 @@ #define _ASM_BFIN_PCI_H #include +#include +#include -/* - * - * Written by Wout Klaren. - */ - -/* Added by Chang Junxiao */ #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x10000000 -#define PCI_DMA_BUS_IS_PHYS (1) -struct pci_ops; - -/* - * Structure with hardware dependent information and functions of the - * PCI bus. - */ -struct pci_bus_info { - - /* - * Resources of the PCI bus. - */ - struct resource mem_space; - struct resource io_space; - - /* - * System dependent functions. - */ - struct pci_ops *bfin_pci_ops; - void (*fixup) (int pci_modify); - void (*conf_device) (unsigned char bus, unsigned char device_fn); -}; - -#define pcibios_assign_all_busses() 0 static inline void pcibios_set_master(struct pci_dev *dev) { - /* No special bus mastering setup handling */ } static inline void pcibios_penalize_isa_irq(int irq) { - /* We don't do dynamic PCI IRQ allocation */ } -static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, - size_t size, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* return virt_to_bus(ptr); */ - return (dma_addr_t) ptr; -} - -/* Unmap a single streaming mode DMA translation. The dma_addr and size - * must match what was provided for in a previous pci_map_single call. All - * other usages are undefined. - * - * After this call, reads by the cpu to the buffer are guarenteed to see - * whatever the device wrote there. - */ -static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, - size_t size, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} - -/* Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scather-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ -static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, - int nents, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - return nents; -} - -/* Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, - int nents, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} - -/* Make physical memory consistent for a single - * streaming mode DMA translation after a transfer. - * - * If you perform a pci_map_single() but wish to interrogate the - * buffer using the cpu, yet do not wish to teardown the PCI dma - * mapping, you must call this function before doing so. At the - * next point you give the PCI dma address back to the card, the - * device again owns the buffer. - */ -static inline void pci_dma_sync_single(struct pci_dev *hwdev, - dma_addr_t dma_handle, size_t size, - int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} - -/* Make physical memory consistent for a set of streaming - * mode DMA translations after a transfer. - * - * The same as pci_dma_sync_single but for a scatter-gather list, - * same rules and usage. - */ -static inline void pci_dma_sync_sg(struct pci_dev *hwdev, - struct scatterlist *sg, int nelems, - int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} #endif /* _ASM_BFIN_PCI_H */ diff --git a/trunk/arch/blackfin/include/asm/ptrace.h b/trunk/arch/blackfin/include/asm/ptrace.h index 27290c955a7a..b33a4488f498 100644 --- a/trunk/arch/blackfin/include/asm/ptrace.h +++ b/trunk/arch/blackfin/include/asm/ptrace.h @@ -89,9 +89,9 @@ struct pt_regs { #define PTRACE_GETREGS 12 #define PTRACE_SETREGS 13 /* ptrace signal */ -#define PTRACE_GETFDPIC 31 -#define PTRACE_GETFDPIC_EXEC 0 -#define PTRACE_GETFDPIC_INTERP 1 +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ #define PS_S (0x0002) diff --git a/trunk/arch/blackfin/include/asm/sections.h b/trunk/arch/blackfin/include/asm/sections.h index 1f5381fbb4a7..42f6c53c59c6 100644 --- a/trunk/arch/blackfin/include/asm/sections.h +++ b/trunk/arch/blackfin/include/asm/sections.h @@ -13,10 +13,18 @@ extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; -extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], - _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], - _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], - _ebss_l2[], _l2_lma_start[]; +/* + * The weak markings on the lengths might seem weird, but this is required + * in order to make gcc accept the fact that these may actually have a value + * of 0 (since they aren't actually addresses, but sizes of sections). + */ +extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[]; +extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[], + _data_l1_lma[], __weak _data_l1_len[]; +extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], + _data_b_l1_lma[], __weak _data_b_l1_len[]; +extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], + _sbss_l2[], _ebss_l2[], _l2_lma[], __weak _l2_len[]; #include diff --git a/trunk/arch/blackfin/include/asm/thread_info.h b/trunk/arch/blackfin/include/asm/thread_info.h index afb3a8626380..a40d9368c38a 100644 --- a/trunk/arch/blackfin/include/asm/thread_info.h +++ b/trunk/arch/blackfin/include/asm/thread_info.h @@ -103,11 +103,13 @@ static inline struct thread_info *current_thread_info(void) #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_FREEZE 6 /* is freezing for suspend */ #define TIF_IRQ_SYNC 7 /* sync pipeline stage */ +#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1< #include -#ifdef CONFIG_ACCESS_CHECK -# include -#endif +#include #define get_ds() (KERNEL_DS) #define get_fs() (current_thread_info()->addr_limit) diff --git a/trunk/arch/blackfin/include/asm/unistd.h b/trunk/arch/blackfin/include/asm/unistd.h index 779be02a910a..22886cbdae7a 100644 --- a/trunk/arch/blackfin/include/asm/unistd.h +++ b/trunk/arch/blackfin/include/asm/unistd.h @@ -388,8 +388,9 @@ #define __NR_pwritev 367 #define __NR_rt_tgsigqueueinfo 368 #define __NR_perf_event_open 369 +#define __NR_recvmmsg 370 -#define __NR_syscall 370 +#define __NR_syscall 371 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/trunk/arch/blackfin/kernel/bfin_dma_5xx.c b/trunk/arch/blackfin/kernel/bfin_dma_5xx.c index 3946aff4f414..924c00286bab 100644 --- a/trunk/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/trunk/arch/blackfin/kernel/bfin_dma_5xx.c @@ -37,9 +37,8 @@ static int __init blackfin_dma_init(void) printk(KERN_INFO "Blackfin DMA Controller\n"); for (i = 0; i < MAX_DMA_CHANNELS; i++) { - dma_ch[i].chan_status = DMA_CHANNEL_FREE; + atomic_set(&dma_ch[i].chan_status, 0); dma_ch[i].regs = dma_io_base_addr[i]; - mutex_init(&(dma_ch[i].dmalock)); } /* Mark MEMDMA Channel 0 as requested since we're using it internally */ request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); @@ -60,7 +59,7 @@ static int proc_dma_show(struct seq_file *m, void *v) int i; for (i = 0; i < MAX_DMA_CHANNELS; ++i) - if (dma_ch[i].chan_status != DMA_CHANNEL_FREE) + if (dma_channel_active(i)) seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id); return 0; @@ -107,20 +106,11 @@ int request_dma(unsigned int channel, const char *device_id) } #endif - mutex_lock(&(dma_ch[channel].dmalock)); - - if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED) - || (dma_ch[channel].chan_status == DMA_CHANNEL_ENABLED)) { - mutex_unlock(&(dma_ch[channel].dmalock)); + if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) { pr_debug("DMA CHANNEL IN USE \n"); return -EBUSY; - } else { - dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; - pr_debug("DMA CHANNEL IS ALLOCATED \n"); } - mutex_unlock(&(dma_ch[channel].dmalock)); - #ifdef CONFIG_BF54x if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { unsigned int per_map; @@ -148,21 +138,20 @@ EXPORT_SYMBOL(request_dma); int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data) { - BUG_ON(channel >= MAX_DMA_CHANNELS || - dma_ch[channel].chan_status == DMA_CHANNEL_FREE); + int ret; + unsigned int irq; - if (callback != NULL) { - int ret; - unsigned int irq = channel2irq(channel); + BUG_ON(channel >= MAX_DMA_CHANNELS || !callback || + !atomic_read(&dma_ch[channel].chan_status)); - ret = request_irq(irq, callback, IRQF_DISABLED, - dma_ch[channel].device_id, data); - if (ret) - return ret; + irq = channel2irq(channel); + ret = request_irq(irq, callback, 0, dma_ch[channel].device_id, data); + if (ret) + return ret; + + dma_ch[channel].irq = irq; + dma_ch[channel].data = data; - dma_ch[channel].irq = irq; - dma_ch[channel].data = data; - } return 0; } EXPORT_SYMBOL(set_dma_callback); @@ -184,7 +173,7 @@ void free_dma(unsigned int channel) { pr_debug("freedma() : BEGIN \n"); BUG_ON(channel >= MAX_DMA_CHANNELS || - dma_ch[channel].chan_status == DMA_CHANNEL_FREE); + !atomic_read(&dma_ch[channel].chan_status)); /* Halt the DMA */ disable_dma(channel); @@ -194,9 +183,7 @@ void free_dma(unsigned int channel) free_irq(dma_ch[channel].irq, dma_ch[channel].data); /* Clear the DMA Variable in the Channel */ - mutex_lock(&(dma_ch[channel].dmalock)); - dma_ch[channel].chan_status = DMA_CHANNEL_FREE; - mutex_unlock(&(dma_ch[channel].dmalock)); + atomic_set(&dma_ch[channel].chan_status, 0); pr_debug("freedma() : END \n"); } @@ -210,13 +197,14 @@ int blackfin_dma_suspend(void) { int i; - for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) { - if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + if (dma_ch[i].regs->cfg & DMAEN) { printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); return -EBUSY; } - dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; + if (i < MAX_DMA_SUSPEND_CHANNELS) + dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; } return 0; diff --git a/trunk/arch/blackfin/kernel/bfin_gpio.c b/trunk/arch/blackfin/kernel/bfin_gpio.c index 22705eeff34f..a174596cc009 100644 --- a/trunk/arch/blackfin/kernel/bfin_gpio.c +++ b/trunk/arch/blackfin/kernel/bfin_gpio.c @@ -100,6 +100,12 @@ u8 pmux_offset[][16] = { }; # endif +#elif defined(BF538_FAMILY) +static unsigned short * const port_fer[] = { + (unsigned short *) PORTCIO_FER, + (unsigned short *) PORTDIO_FER, + (unsigned short *) PORTEIO_FER, +}; #endif static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; @@ -163,6 +169,27 @@ static int cmp_label(unsigned short ident, const char *label) static void port_setup(unsigned gpio, unsigned short usage) { +#if defined(BF538_FAMILY) + /* + * BF538/9 Port C,D and E are special. + * Inverted PORT_FER polarity on CDE and no PORF_FER on F + * Regular PORT F GPIOs are handled here, CDE are exclusively + * managed by GPIOLIB + */ + + if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES) + return; + + gpio -= MAX_BLACKFIN_GPIOS; + + if (usage == GPIO_USAGE) + *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); + else + *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); + SSYNC(); + return; +#endif + if (check_gpio(gpio)) return; @@ -762,6 +789,8 @@ int peripheral_request(unsigned short per, const char *label) if (!(per & P_DEFINED)) return -ENODEV; + BUG_ON(ident >= MAX_RESOURCES); + local_irq_save_hw(flags); /* If a pin can be muxed as either GPIO or peripheral, make @@ -979,6 +1008,76 @@ void bfin_gpio_free(unsigned gpio) } EXPORT_SYMBOL(bfin_gpio_free); +#ifdef BFIN_SPECIAL_GPIO_BANKS +static unsigned short reserved_special_gpio_map[gpio_bank(MAX_RESOURCES)]; + +int bfin_special_gpio_request(unsigned gpio, const char *label) +{ + unsigned long flags; + + local_irq_save_hw(flags); + + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) { + local_irq_restore_hw(flags); + return 0; + } + + if (unlikely(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + local_irq_restore_hw(flags); + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", + gpio, get_label(gpio)); + + return -EBUSY; + } + if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + local_irq_restore_hw(flags); + printk(KERN_ERR + "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); + + return -EBUSY; + } + + reserved_special_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); + reserved_peri_map[gpio_bank(gpio)] |= gpio_bit(gpio); + + set_label(gpio, label); + local_irq_restore_hw(flags); + port_setup(gpio, GPIO_USAGE); + + return 0; +} +EXPORT_SYMBOL(bfin_special_gpio_request); + +void bfin_special_gpio_free(unsigned gpio) +{ + unsigned long flags; + + might_sleep(); + + local_irq_save_hw(flags); + + if (unlikely(!(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + gpio_error(gpio); + local_irq_restore_hw(flags); + return; + } + + reserved_special_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + reserved_peri_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + set_label(gpio, "free"); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(bfin_special_gpio_free); +#endif + + int bfin_gpio_irq_request(unsigned gpio, const char *label) { unsigned long flags; diff --git a/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c index b52c1f8c4bc0..8d42b9e50dfa 100644 --- a/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -92,6 +92,6 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) icplb_tbl[cpu][i_i++].data = 0; } -void generate_cplb_tables_all(void) +void __init generate_cplb_tables_all(void) { } diff --git a/trunk/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/trunk/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 69e0e530d70f..930c01c06813 100644 --- a/trunk/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/trunk/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -113,11 +113,11 @@ static noinline int dcplb_miss(unsigned int cpu) addr = L2_START; d_data = L2_DMEMORY; } else if (addr >= physical_mem_end) { - if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE - && (status & FAULT_USERSUPV)) { - addr &= ~0x3fffff; + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { + addr &= ~(4 * 1024 * 1024 - 1); d_data &= ~PAGE_SIZE_4KB; d_data |= PAGE_SIZE_4MB; + d_data |= CPLB_USER_RD | CPLB_USER_WR; } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) { addr &= ~(1 * 1024 * 1024 - 1); @@ -203,7 +203,12 @@ static noinline int icplb_miss(unsigned int cpu) addr = L2_START; i_data = L2_IMEMORY; } else if (addr >= physical_mem_end) { - if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { + addr &= ~(4 * 1024 * 1024 - 1); + i_data &= ~PAGE_SIZE_4KB; + i_data |= PAGE_SIZE_4MB; + i_data |= CPLB_USER_RD; + } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & FAULT_USERSUPV)) { addr &= ~(1 * 1024 * 1024 - 1); i_data &= ~PAGE_SIZE_4KB; diff --git a/trunk/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/trunk/arch/blackfin/kernel/cplb-nompu/cplbinit.c index fd9a2f31e686..282a7919821b 100644 --- a/trunk/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/trunk/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -89,15 +89,25 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) void __init generate_cplb_tables_all(void) { + unsigned long uncached_end; int i_d, i_i; i_d = 0; /* Normal RAM, including MTD FS. */ #ifdef CONFIG_MTD_UCLINUX - dcplb_bounds[i_d].eaddr = memory_mtd_start + mtd_size; + uncached_end = memory_mtd_start + mtd_size; #else - dcplb_bounds[i_d].eaddr = memory_end; + uncached_end = memory_end; #endif + /* + * if DMA uncached is less than 1MB, mark the 1MB chunk as uncached + * so that we don't have to use 4kB pages and cause CPLB thrashing + */ + if ((DMA_UNCACHED_REGION >= 1 * 1024 * 1024) || !DMA_UNCACHED_REGION || + ((_ramend - uncached_end) >= 1 * 1024 * 1024)) + dcplb_bounds[i_d].eaddr = uncached_end; + else + dcplb_bounds[i_d].eaddr = uncached_end & ~(1 * 1024 * 1024); dcplb_bounds[i_d++].data = SDRAM_DGENERIC; /* DMA uncached region. */ if (DMA_UNCACHED_REGION) { @@ -135,18 +145,15 @@ void __init generate_cplb_tables_all(void) i_i = 0; /* Normal RAM, including MTD FS. */ -#ifdef CONFIG_MTD_UCLINUX - icplb_bounds[i_i].eaddr = memory_mtd_start + mtd_size; -#else - icplb_bounds[i_i].eaddr = memory_end; -#endif + icplb_bounds[i_i].eaddr = uncached_end; icplb_bounds[i_i++].data = SDRAM_IGENERIC; - /* DMA uncached region. */ - if (DMA_UNCACHED_REGION) { - icplb_bounds[i_i].eaddr = _ramend; - icplb_bounds[i_i++].data = 0; - } if (_ramend != physical_mem_end) { + /* DMA uncached region. */ + if (DMA_UNCACHED_REGION) { + /* Normally this hole is caught by the async below. */ + icplb_bounds[i_i].eaddr = _ramend; + icplb_bounds[i_i++].data = 0; + } /* Reserved memory. */ icplb_bounds[i_i].eaddr = physical_mem_end; icplb_bounds[i_i++].data = (reserved_mem_icache_on ? diff --git a/trunk/arch/blackfin/kernel/dma-mapping.c b/trunk/arch/blackfin/kernel/dma-mapping.c index e74e74d7733f..e937f323d82c 100644 --- a/trunk/arch/blackfin/kernel/dma-mapping.c +++ b/trunk/arch/blackfin/kernel/dma-mapping.c @@ -7,30 +7,25 @@ */ #include -#include +#include #include -#include #include -#include #include -#include #include -#include -#include static spinlock_t dma_page_lock; -static unsigned int *dma_page; +static unsigned long *dma_page; static unsigned int dma_pages; static unsigned long dma_base; static unsigned long dma_size; static unsigned int dma_initialized; -void dma_alloc_init(unsigned long start, unsigned long end) +static void dma_alloc_init(unsigned long start, unsigned long end) { spin_lock_init(&dma_page_lock); dma_initialized = 0; - dma_page = (unsigned int *)__get_free_page(GFP_KERNEL); + dma_page = (unsigned long *)__get_free_page(GFP_KERNEL); memset(dma_page, 0, PAGE_SIZE); dma_base = PAGE_ALIGN(start); dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start); @@ -58,10 +53,11 @@ static unsigned long __alloc_dma_pages(unsigned int pages) spin_lock_irqsave(&dma_page_lock, flags); for (i = 0; i < dma_pages;) { - if (dma_page[i++] == 0) { + if (test_bit(i++, dma_page) == 0) { if (++count == pages) { while (count--) - dma_page[--i] = 1; + __set_bit(--i, dma_page); + ret = dma_base + (i << PAGE_SHIFT); break; } @@ -84,14 +80,14 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) } spin_lock_irqsave(&dma_page_lock, flags); - for (i = page; i < page + pages; i++) { - dma_page[i] = 0; - } + for (i = page; i < page + pages; i++) + __clear_bit(i, dma_page); + spin_unlock_irqrestore(&dma_page_lock, flags); } void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; @@ -115,21 +111,14 @@ dma_free_coherent(struct device *dev, size_t size, void *vaddr, EXPORT_SYMBOL(dma_free_coherent); /* - * Dummy functions defined for some existing drivers + * Streaming DMA mappings */ - -dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) +void __dma_sync(dma_addr_t addr, size_t size, + enum dma_data_direction dir) { - BUG_ON(direction == DMA_NONE); - - invalidate_dcache_range((unsigned long)ptr, - (unsigned long)ptr + size); - - return (dma_addr_t) ptr; + _dma_sync(addr, size, dir); } -EXPORT_SYMBOL(dma_map_single); +EXPORT_SYMBOL(__dma_sync); int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, @@ -137,30 +126,23 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, { int i; - BUG_ON(direction == DMA_NONE); - for (i = 0; i < nents; i++, sg++) { sg->dma_address = (dma_addr_t) sg_virt(sg); - - invalidate_dcache_range(sg_dma_address(sg), - sg_dma_address(sg) + - sg_dma_len(sg)); + __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); } return nents; } EXPORT_SYMBOL(dma_map_sg); -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) { - BUG_ON(direction == DMA_NONE); -} -EXPORT_SYMBOL(dma_unmap_single); + int i; -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); + for (i = 0; i < nelems; i++, sg++) { + sg->dma_address = (dma_addr_t) sg_virt(sg); + __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); + } } -EXPORT_SYMBOL(dma_unmap_sg); +EXPORT_SYMBOL(dma_sync_sg_for_device); diff --git a/trunk/arch/blackfin/kernel/gptimers.c b/trunk/arch/blackfin/kernel/gptimers.c index 7281a91d26b5..cdbe075de1dc 100644 --- a/trunk/arch/blackfin/kernel/gptimers.c +++ b/trunk/arch/blackfin/kernel/gptimers.c @@ -137,7 +137,7 @@ static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] = #endif }; -void set_gptimer_pwidth(int timer_id, uint32_t value) +void set_gptimer_pwidth(unsigned int timer_id, uint32_t value) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->width = value; @@ -145,14 +145,14 @@ void set_gptimer_pwidth(int timer_id, uint32_t value) } EXPORT_SYMBOL(set_gptimer_pwidth); -uint32_t get_gptimer_pwidth(int timer_id) +uint32_t get_gptimer_pwidth(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->width; } EXPORT_SYMBOL(get_gptimer_pwidth); -void set_gptimer_period(int timer_id, uint32_t period) +void set_gptimer_period(unsigned int timer_id, uint32_t period) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->period = period; @@ -160,28 +160,28 @@ void set_gptimer_period(int timer_id, uint32_t period) } EXPORT_SYMBOL(set_gptimer_period); -uint32_t get_gptimer_period(int timer_id) +uint32_t get_gptimer_period(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->period; } EXPORT_SYMBOL(get_gptimer_period); -uint32_t get_gptimer_count(int timer_id) +uint32_t get_gptimer_count(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->counter; } EXPORT_SYMBOL(get_gptimer_count); -uint32_t get_gptimer_status(int group) +uint32_t get_gptimer_status(unsigned int group) { tassert(group < BFIN_TIMER_NUM_GROUP); return group_regs[group]->status; } EXPORT_SYMBOL(get_gptimer_status); -void set_gptimer_status(int group, uint32_t value) +void set_gptimer_status(unsigned int group, uint32_t value) { tassert(group < BFIN_TIMER_NUM_GROUP); group_regs[group]->status = value; @@ -189,42 +189,42 @@ void set_gptimer_status(int group, uint32_t value) } EXPORT_SYMBOL(set_gptimer_status); -int get_gptimer_intr(int timer_id) +int get_gptimer_intr(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_intr); -void clear_gptimer_intr(int timer_id) +void clear_gptimer_intr(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id]; } EXPORT_SYMBOL(clear_gptimer_intr); -int get_gptimer_over(int timer_id) +int get_gptimer_over(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_over); -void clear_gptimer_over(int timer_id) +void clear_gptimer_over(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id]; } EXPORT_SYMBOL(clear_gptimer_over); -int get_gptimer_run(int timer_id) +int get_gptimer_run(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_run); -void set_gptimer_config(int timer_id, uint16_t config) +void set_gptimer_config(unsigned int timer_id, uint16_t config) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->config = config; @@ -232,7 +232,7 @@ void set_gptimer_config(int timer_id, uint16_t config) } EXPORT_SYMBOL(set_gptimer_config); -uint16_t get_gptimer_config(int timer_id) +uint16_t get_gptimer_config(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->config; @@ -280,7 +280,7 @@ void disable_gptimers_sync(uint16_t mask) } EXPORT_SYMBOL(disable_gptimers_sync); -void set_gptimer_pulse_hi(int timer_id) +void set_gptimer_pulse_hi(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->config |= TIMER_PULSE_HI; @@ -288,7 +288,7 @@ void set_gptimer_pulse_hi(int timer_id) } EXPORT_SYMBOL(set_gptimer_pulse_hi); -void clear_gptimer_pulse_hi(int timer_id) +void clear_gptimer_pulse_hi(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->config &= ~TIMER_PULSE_HI; diff --git a/trunk/arch/blackfin/kernel/ipipe.c b/trunk/arch/blackfin/kernel/ipipe.c index 5d7382396dc0..a77307a4473b 100644 --- a/trunk/arch/blackfin/kernel/ipipe.c +++ b/trunk/arch/blackfin/kernel/ipipe.c @@ -335,3 +335,70 @@ void __ipipe_enable_root_irqs_hw(void) __clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status)); bfin_sti(bfin_irq_flags); } + +/* + * We could use standard atomic bitops in the following root status + * manipulation routines, but let's prepare for SMP support in the + * same move, preventing CPU migration as required. + */ +void __ipipe_stall_root(void) +{ + unsigned long *p, flags; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + __set_bit(IPIPE_STALL_FLAG, p); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(__ipipe_stall_root); + +unsigned long __ipipe_test_and_stall_root(void) +{ + unsigned long *p, flags; + int x; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + x = __test_and_set_bit(IPIPE_STALL_FLAG, p); + local_irq_restore_hw(flags); + + return x; +} +EXPORT_SYMBOL(__ipipe_test_and_stall_root); + +unsigned long __ipipe_test_root(void) +{ + const unsigned long *p; + unsigned long flags; + int x; + + local_irq_save_hw_smp(flags); + p = &__ipipe_root_status; + x = test_bit(IPIPE_STALL_FLAG, p); + local_irq_restore_hw_smp(flags); + + return x; +} +EXPORT_SYMBOL(__ipipe_test_root); + +void __ipipe_lock_root(void) +{ + unsigned long *p, flags; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + __set_bit(IPIPE_SYNCDEFER_FLAG, p); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(__ipipe_lock_root); + +void __ipipe_unlock_root(void) +{ + unsigned long *p, flags; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + __clear_bit(IPIPE_SYNCDEFER_FLAG, p); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(__ipipe_unlock_root); diff --git a/trunk/arch/blackfin/kernel/kgdb.c b/trunk/arch/blackfin/kernel/kgdb.c index cce79d05b90b..f1036b6b9293 100644 --- a/trunk/arch/blackfin/kernel/kgdb.c +++ b/trunk/arch/blackfin/kernel/kgdb.c @@ -24,16 +24,6 @@ #include #include -/* Put the error code here just in case the user cares. */ -int gdb_bfin_errcode; -/* Likewise, the vector number here (since GDB only gets the signal - number through the usual means, and that's not very specific). */ -int gdb_bfin_vector = -1; - -#if KGDB_MAX_NO_CPUS != 8 -#error change the definition of slavecpulocks -#endif - void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { gdb_regs[BFIN_R0] = regs->r0; @@ -369,13 +359,6 @@ void kgdb_roundup_cpu(int cpu, unsigned long flags) } #endif -void kgdb_post_primary_code(struct pt_regs *regs, int eVector, int err_code) -{ - /* Master processor is completely in the debugger */ - gdb_bfin_vector = eVector; - gdb_bfin_errcode = err_code; -} - int kgdb_arch_handle_exception(int vector, int signo, int err_code, char *remcom_in_buffer, char *remcom_out_buffer, diff --git a/trunk/arch/blackfin/kernel/kgdb_test.c b/trunk/arch/blackfin/kernel/kgdb_test.c index 59fc42dc5d6a..9a4b07594389 100644 --- a/trunk/arch/blackfin/kernel/kgdb_test.c +++ b/trunk/arch/blackfin/kernel/kgdb_test.c @@ -17,8 +17,9 @@ #include +/* Symbols are here for kgdb test to poke directly */ static char cmdline[256]; -static unsigned long len; +static size_t len; #ifndef CONFIG_SMP static int num1 __attribute__((l1_data)); @@ -27,11 +28,10 @@ void kgdb_l1_test(void) __attribute__((l1_text)); void kgdb_l1_test(void) { - printk(KERN_ALERT "L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); - printk(KERN_ALERT "L1 : code function addr = 0x%p\n", kgdb_l1_test); - num1 = num1 + 10 ; - printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); - return ; + pr_alert("L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); + pr_alert("L1 : code function addr = 0x%p\n", kgdb_l1_test); + num1 = num1 + 10; + pr_alert("L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); } #endif @@ -42,11 +42,10 @@ void kgdb_l2_test(void) __attribute__((l2)); void kgdb_l2_test(void) { - printk(KERN_ALERT "L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); - printk(KERN_ALERT "L2 : code function addr = 0x%p\n", kgdb_l2_test); - num2 = num2 + 20 ; - printk(KERN_ALERT "L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); - return ; + pr_alert("L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); + pr_alert("L2 : code function addr = 0x%p\n", kgdb_l2_test); + num2 = num2 + 20; + pr_alert("L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); } #endif @@ -54,12 +53,14 @@ void kgdb_l2_test(void) int kgdb_test(char *name, int len, int count, int z) { - printk(KERN_ALERT "kgdb name(%d): %s, %d, %d\n", len, name, count, z); + pr_alert("kgdb name(%d): %s, %d, %d\n", len, name, count, z); count = z; return count; } -static int test_proc_output(char *buf) +static ssize_t +kgdb_test_proc_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { kgdb_test("hello world!", 12, 0x55, 0x10); #ifndef CONFIG_SMP @@ -72,49 +73,31 @@ static int test_proc_output(char *buf) return 0; } -static int test_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) +static ssize_t +kgdb_test_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { - int len; - - len = test_proc_output(page); - if (len <= off+count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int test_write_proc(struct file *file, const char *buffer, - unsigned long count, void *data) -{ - if (count >= 256) - len = 255; - else - len = count; - + len = min_t(size_t, 255, count); memcpy(cmdline, buffer, count); cmdline[len] = 0; return len; } +static const struct file_operations kgdb_test_proc_fops = { + .owner = THIS_MODULE, + .read = kgdb_test_proc_read, + .write = kgdb_test_proc_write, +}; + static int __init kgdbtest_init(void) { struct proc_dir_entry *entry; - entry = create_proc_entry("kgdbtest", 0, NULL); + entry = proc_create("kgdbtest", 0, NULL, &kgdb_test_proc_fops); if (entry == NULL) return -ENOMEM; - entry->read_proc = test_read_proc; - entry->write_proc = test_write_proc; - entry->data = NULL; - return 0; } diff --git a/trunk/arch/blackfin/kernel/process.c b/trunk/arch/blackfin/kernel/process.c index 45876427eb2d..b56b0e485e0b 100644 --- a/trunk/arch/blackfin/kernel/process.c +++ b/trunk/arch/blackfin/kernel/process.c @@ -258,9 +258,12 @@ void finish_atomic_sections (struct pt_regs *regs) int __user *up0 = (int __user *)regs->p0; switch (regs->pc) { + default: + /* not in middle of an atomic step, so resume like normal */ + return; + case ATOMIC_XCHG32 + 2: put_user(regs->r1, up0); - regs->pc = ATOMIC_XCHG32 + 4; break; case ATOMIC_CAS32 + 2: @@ -268,7 +271,6 @@ void finish_atomic_sections (struct pt_regs *regs) if (regs->r0 == regs->r1) case ATOMIC_CAS32 + 6: put_user(regs->r2, up0); - regs->pc = ATOMIC_CAS32 + 8; break; case ATOMIC_ADD32 + 2: @@ -276,7 +278,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_ADD32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_ADD32 + 6; break; case ATOMIC_SUB32 + 2: @@ -284,7 +285,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_SUB32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_SUB32 + 6; break; case ATOMIC_IOR32 + 2: @@ -292,7 +292,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_IOR32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_IOR32 + 6; break; case ATOMIC_AND32 + 2: @@ -300,7 +299,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_AND32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_AND32 + 6; break; case ATOMIC_XOR32 + 2: @@ -308,9 +306,15 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_XOR32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_XOR32 + 6; break; } + + /* + * We've finished the atomic section, and the only thing left for + * userspace is to do a RTS, so we might as well handle that too + * since we need to update the PC anyways. + */ + regs->pc = regs->rets; } static inline @@ -332,12 +336,58 @@ int in_mem_const(unsigned long addr, unsigned long size, { return in_mem_const_off(addr, size, 0, const_addr, const_size); } -#define IN_ASYNC(bnum, bctlnum) \ +#define ASYNC_ENABLED(bnum, bctlnum) \ ({ \ - (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \ - bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \ - BFIN_MEM_ACCESS_CORE; \ + (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \ + bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \ + 1; \ }) +/* + * We can't read EBIU banks that aren't enabled or we end up hanging + * on the access to the async space. Make sure we validate accesses + * that cross async banks too. + * 0 - found, but unusable + * 1 - found & usable + * 2 - not found + */ +static +int in_async(unsigned long addr, unsigned long size) +{ + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) { + if (!ASYNC_ENABLED(0, 0)) + return 0; + if (addr + size <= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) + return 1; + size -= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE - addr; + addr = ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE; + } + if (addr >= ASYNC_BANK1_BASE && addr < ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) { + if (!ASYNC_ENABLED(1, 0)) + return 0; + if (addr + size <= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) + return 1; + size -= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE - addr; + addr = ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE; + } + if (addr >= ASYNC_BANK2_BASE && addr < ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) { + if (!ASYNC_ENABLED(2, 1)) + return 0; + if (addr + size <= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) + return 1; + size -= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE - addr; + addr = ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE; + } + if (addr >= ASYNC_BANK3_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { + if (ASYNC_ENABLED(3, 1)) + return 0; + if (addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) + return 1; + return 0; + } + + /* not within async bounds */ + return 2; +} int bfin_mem_access_type(unsigned long addr, unsigned long size) { @@ -374,17 +424,11 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size) if (addr >= SYSMMR_BASE) return BFIN_MEM_ACCESS_CORE_ONLY; - /* We can't read EBIU banks that aren't enabled or we end up hanging - * on the access to the async space. - */ - if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE)) - return IN_ASYNC(0, 0); - if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE)) - return IN_ASYNC(1, 0); - if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE)) - return IN_ASYNC(2, 1); - if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE)) - return IN_ASYNC(3, 1); + switch (in_async(addr, size)) { + case 0: return -EFAULT; + case 1: return BFIN_MEM_ACCESS_CORE; + case 2: /* fall through */; + } if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH)) return BFIN_MEM_ACCESS_CORE; @@ -401,6 +445,8 @@ __attribute__((l1_text)) /* Return 1 if access to memory range is OK, 0 otherwise */ int _access_ok(unsigned long addr, unsigned long size) { + int aret; + if (size == 0) return 1; /* Check that things do not wrap around */ @@ -450,6 +496,11 @@ int _access_ok(unsigned long addr, unsigned long size) if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) return 1; #endif + + aret = in_async(addr, size); + if (aret < 2) + return aret; + if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH)) return 1; diff --git a/trunk/arch/blackfin/kernel/ptrace.c b/trunk/arch/blackfin/kernel/ptrace.c index 56b0ba12175f..65567dc4b9f5 100644 --- a/trunk/arch/blackfin/kernel/ptrace.c +++ b/trunk/arch/blackfin/kernel/ptrace.c @@ -316,19 +316,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case BFIN_MEM_ACCESS_CORE_ONLY: copied = access_process_vm(child, addr, &data, to_copy, 1); - if (copied) - break; - - /* hrm, why didn't that work ... maybe no mapping */ - if (addr >= FIXED_CODE_START && - addr + to_copy <= FIXED_CODE_END) { - copy_to_user_page(0, 0, 0, paddr, &data, to_copy); - copied = to_copy; - } else if (addr >= BOOT_ROM_START) { - memcpy(paddr, &data, to_copy); - copied = to_copy; - } - break; case BFIN_MEM_ACCESS_DMA: if (safe_dma_memcpy(paddr, &data, to_copy)) diff --git a/trunk/arch/blackfin/kernel/setup.c b/trunk/arch/blackfin/kernel/setup.c index c202a44d1416..95448ae9c43a 100644 --- a/trunk/arch/blackfin/kernel/setup.c +++ b/trunk/arch/blackfin/kernel/setup.c @@ -178,10 +178,10 @@ void __init bfin_cache_init(void) void __init bfin_relocate_l1_mem(void) { - unsigned long l1_code_length; - unsigned long l1_data_a_length; - unsigned long l1_data_b_length; - unsigned long l2_length; + unsigned long text_l1_len = (unsigned long)_text_l1_len; + unsigned long data_l1_len = (unsigned long)_data_l1_len; + unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len; + unsigned long l2_len = (unsigned long)_l2_len; early_shadow_stamp(); @@ -201,30 +201,23 @@ void __init bfin_relocate_l1_mem(void) blackfin_dma_early_init(); - /* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ - l1_code_length = _etext_l1 - _stext_l1; - if (l1_code_length) - early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); + /* if necessary, copy L1 text to L1 instruction SRAM */ + if (L1_CODE_LENGTH && text_l1_len) + early_dma_memcpy(_stext_l1, _text_l1_lma, text_l1_len); - /* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ - l1_data_a_length = _sbss_l1 - _sdata_l1; - if (l1_data_a_length) - early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); + /* if necessary, copy L1 data to L1 data bank A SRAM */ + if (L1_DATA_A_LENGTH && data_l1_len) + early_dma_memcpy(_sdata_l1, _data_l1_lma, data_l1_len); - /* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ - l1_data_b_length = _sbss_b_l1 - _sdata_b_l1; - if (l1_data_b_length) - early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + - l1_data_a_length, l1_data_b_length); + /* if necessary, copy L1 data B to L1 data bank B SRAM */ + if (L1_DATA_B_LENGTH && data_b_l1_len) + early_dma_memcpy(_sdata_b_l1, _data_b_l1_lma, data_b_l1_len); early_dma_memcpy_done(); - /* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */ - if (L2_LENGTH != 0) { - l2_length = _sbss_l2 - _stext_l2; - if (l2_length) - memcpy(_stext_l2, _l2_lma_start, l2_length); - } + /* if necessary, copy L2 text/data to L2 SRAM */ + if (L2_LENGTH && l2_len) + memcpy(_stext_l2, _l2_lma, l2_len); } /* add_memory_region to memmap */ @@ -608,11 +601,6 @@ static __init void memory_setup(void) page_mask_order = get_order(3 * page_mask_nelts * sizeof(long)); #endif -#if !defined(CONFIG_MTD_UCLINUX) - /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ - memory_end -= SIZE_4K; -#endif - init_mm.start_code = (unsigned long)_stext; init_mm.end_code = (unsigned long)_etext; init_mm.end_data = (unsigned long)_edata; @@ -917,7 +905,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) - printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); + printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid()); else if (bfin_compiled_revid() == -1) printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU); else diff --git a/trunk/arch/blackfin/kernel/signal.c b/trunk/arch/blackfin/kernel/signal.c index 9d90c18fab23..e0fd63e9e38a 100644 --- a/trunk/arch/blackfin/kernel/signal.c +++ b/trunk/arch/blackfin/kernel/signal.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -332,3 +333,20 @@ asmlinkage void do_signal(struct pt_regs *regs) sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } } + +/* + * notification of userspace execution resumption + */ +asmlinkage void do_notify_resume(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SIGPENDING) || test_thread_flag(TIF_RESTORE_SIGMASK)) + do_signal(regs); + + if (test_thread_flag(TIF_NOTIFY_RESUME)) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); + } +} + diff --git a/trunk/arch/blackfin/kernel/time-ts.c b/trunk/arch/blackfin/kernel/time-ts.c index 359cfb1815ca..17c38c5b5b22 100644 --- a/trunk/arch/blackfin/kernel/time-ts.c +++ b/trunk/arch/blackfin/kernel/time-ts.c @@ -22,8 +22,6 @@ #include #include -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) * basic equation: @@ -46,20 +44,11 @@ * -johnstul@us.ibm.com "math is hard, lets go shopping!" */ -static unsigned long cyc2ns_scale; #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz; -} - -static inline unsigned long long cycles_2_ns(cycle_t cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} +#if defined(CONFIG_CYCLES_CLOCKSOURCE) -static cycle_t bfin_read_cycles(struct clocksource *cs) +static notrace cycle_t bfin_read_cycles(struct clocksource *cs) { return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod); } @@ -69,19 +58,18 @@ static struct clocksource bfin_cs_cycles = { .rating = 400, .read = bfin_read_cycles, .mask = CLOCKSOURCE_MASK(64), - .shift = 22, + .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long long sched_clock(void) +static inline unsigned long long bfin_cs_cycles_sched_clock(void) { - return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles)); + return clocksource_cyc2ns(bfin_read_cycles(&bfin_cs_cycles), + bfin_cs_cycles.mult, bfin_cs_cycles.shift); } static int __init bfin_cs_cycles_init(void) { - set_cyc2ns_scale(get_cclk() / 1000); - bfin_cs_cycles.mult = \ clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift); @@ -108,7 +96,7 @@ void __init setup_gptimer0(void) enable_gptimers(TIMER0bit); } -static cycle_t bfin_read_gptimer0(void) +static cycle_t bfin_read_gptimer0(struct clocksource *cs) { return bfin_read_TIMER0_COUNTER(); } @@ -118,10 +106,16 @@ static struct clocksource bfin_cs_gptimer0 = { .rating = 350, .read = bfin_read_gptimer0, .mask = CLOCKSOURCE_MASK(32), - .shift = 22, + .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static inline unsigned long long bfin_cs_gptimer0_sched_clock(void) +{ + return clocksource_cyc2ns(bfin_read_TIMER0_COUNTER(), + bfin_cs_gptimer0.mult, bfin_cs_gptimer0.shift); +} + static int __init bfin_cs_gptimer0_init(void) { setup_gptimer0(); @@ -138,6 +132,19 @@ static int __init bfin_cs_gptimer0_init(void) # define bfin_cs_gptimer0_init() #endif + +#if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE) +/* prefer to use cycles since it has higher rating */ +notrace unsigned long long sched_clock(void) +{ +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + return bfin_cs_cycles_sched_clock(); +#else + return bfin_cs_gptimer0_sched_clock(); +#endif +} +#endif + #ifdef CONFIG_CORE_TIMER_IRQ_L1 __attribute__((l1_text)) #endif diff --git a/trunk/arch/blackfin/kernel/time.c b/trunk/arch/blackfin/kernel/time.c index bd3b53da295e..13c1ee3e6408 100644 --- a/trunk/arch/blackfin/kernel/time.c +++ b/trunk/arch/blackfin/kernel/time.c @@ -184,11 +184,3 @@ void __init time_init(void) time_sched_init(timer_interrupt); } - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ); -} diff --git a/trunk/arch/blackfin/kernel/traps.c b/trunk/arch/blackfin/kernel/traps.c index 9636bace00e8..d3cbcd6bd985 100644 --- a/trunk/arch/blackfin/kernel/traps.c +++ b/trunk/arch/blackfin/kernel/traps.c @@ -119,6 +119,15 @@ static void decode_address(char *buf, unsigned long address) return; } + /* + * Don't walk any of the vmas if we are oopsing, it has been known + * to cause problems - corrupt vmas (kernel crashes) cause double faults + */ + if (oops_in_progress) { + strcat(buf, "/* kernel dynamic memory (maybe user-space) */"); + return; + } + /* looks like we're off in user-land, so let's walk all the * mappings of all our processes and see if we can't be a whee * bit more specific @@ -515,6 +524,36 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) break; /* External Memory Addressing Error */ case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): + if (ANOMALY_05000310) { + static unsigned long anomaly_rets; + + if ((fp->pc >= (L1_CODE_START + L1_CODE_LENGTH - 512)) && + (fp->pc < (L1_CODE_START + L1_CODE_LENGTH))) { + /* + * A false hardware error will happen while fetching at + * the L1 instruction SRAM boundary. Ignore it. + */ + anomaly_rets = fp->rets; + goto traps_done; + } else if (fp->rets == anomaly_rets) { + /* + * While boundary code returns to a function, at the ret + * point, a new false hardware error might occur too based + * on tests. Ignore it too. + */ + goto traps_done; + } else if ((fp->rets >= (L1_CODE_START + L1_CODE_LENGTH - 512)) && + (fp->rets < (L1_CODE_START + L1_CODE_LENGTH))) { + /* + * If boundary code calls a function, at the entry point, + * a new false hardware error maybe happen based on tests. + * Ignore it too. + */ + goto traps_done; + } else + anomaly_rets = 0; + } + info.si_code = BUS_ADRERR; sig = SIGBUS; strerror = KERN_NOTICE HWC_x3(KERN_NOTICE); @@ -976,12 +1015,12 @@ void dump_bfin_process(struct pt_regs *fp) !((unsigned long)current & 0x3) && current->pid) { verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n"); if (current->comm >= (char *)FIXED_CODE_START) - verbose_printk(KERN_NOTICE "COMM=%s PID=%d\n", + verbose_printk(KERN_NOTICE "COMM=%s PID=%d", current->comm, current->pid); else - verbose_printk(KERN_NOTICE "COMM= invalid\n"); + verbose_printk(KERN_NOTICE "COMM= invalid"); - printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); + printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu); if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" diff --git a/trunk/arch/blackfin/kernel/vmlinux.lds.S b/trunk/arch/blackfin/kernel/vmlinux.lds.S index 10e12539000e..66799e763dc9 100644 --- a/trunk/arch/blackfin/kernel/vmlinux.lds.S +++ b/trunk/arch/blackfin/kernel/vmlinux.lds.S @@ -4,8 +4,6 @@ * Licensed under the GPL-2 or later */ -#define VMLINUX_SYMBOL(_sym_) _##_sym_ - #include #include #include @@ -123,8 +121,6 @@ SECTIONS EXIT_DATA } - __l1_lma_start = .; - .text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data)) { . = ALIGN(4); @@ -136,9 +132,11 @@ SECTIONS . = ALIGN(4); __etext_l1 = .; } - ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!") + __text_l1_lma = LOADADDR(.text_l1); + __text_l1_len = SIZEOF(.text_l1); + ASSERT (__text_l1_len <= L1_CODE_LENGTH, "L1 text overflow!") - .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1)) + .data_l1 L1_DATA_A_START : AT(__text_l1_lma + __text_l1_len) { . = ALIGN(4); __sdata_l1 = .; @@ -154,9 +152,11 @@ SECTIONS . = ALIGN(4); __ebss_l1 = .; } - ASSERT (SIZEOF(.data_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!") + __data_l1_lma = LOADADDR(.data_l1); + __data_l1_len = SIZEOF(.data_l1); + ASSERT (__data_l1_len <= L1_DATA_A_LENGTH, "L1 data A overflow!") - .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1)) + .data_b_l1 L1_DATA_B_START : AT(__data_l1_lma + __data_l1_len) { . = ALIGN(4); __sdata_b_l1 = .; @@ -169,11 +169,11 @@ SECTIONS . = ALIGN(4); __ebss_b_l1 = .; } - ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!") - - __l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); + __data_b_l1_lma = LOADADDR(.data_b_l1); + __data_b_l1_len = SIZEOF(.data_b_l1); + ASSERT (__data_b_l1_len <= L1_DATA_B_LENGTH, "L1 data B overflow!") - .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) + .text_data_l2 L2_START : AT(__data_b_l1_lma + __data_b_l1_len) { . = ALIGN(4); __stext_l2 = .; @@ -195,12 +195,14 @@ SECTIONS . = ALIGN(4); __ebss_l2 = .; } - ASSERT (SIZEOF(.text_data_l2) <= L2_LENGTH, "L2 overflow!") + __l2_lma = LOADADDR(.text_data_l2); + __l2_len = SIZEOF(.text_data_l2); + ASSERT (__l2_len <= L2_LENGTH, "L2 overflow!") /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. */ - . = LOADADDR(.text_data_l2) + SIZEOF(.text_data_l2); + . = __l2_lma + __l2_len; . = ALIGN(PAGE_SIZE); ___init_end = .; diff --git a/trunk/arch/blackfin/lib/Makefile b/trunk/arch/blackfin/lib/Makefile index 635288fc5f54..42c47dc9e12f 100644 --- a/trunk/arch/blackfin/lib/Makefile +++ b/trunk/arch/blackfin/lib/Makefile @@ -5,7 +5,7 @@ lib-y := \ ashldi3.o ashrdi3.o lshrdi3.o \ muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ - checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \ + memcpy.o memset.o memcmp.o memchr.o memmove.o \ strcmp.o strcpy.o strncmp.o strncpy.o \ umulsi3_highpart.o smulsi3_highpart.o \ ins.o outs.o diff --git a/trunk/arch/blackfin/lib/checksum.c b/trunk/arch/blackfin/lib/checksum.c deleted file mode 100644 index c62969dc1bbb..000000000000 --- a/trunk/arch/blackfin/lib/checksum.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - * - * An implementation of the TCP/IP protocol suite for the LINUX operating - * system. INET is implemented using the BSD Socket interface as the - * means of communication with the user level. - * - */ - -#include -#include -#include - -#ifdef CONFIG_IP_CHECKSUM_L1 -static unsigned short do_csum(const unsigned char *buff, int len)__attribute__((l1_text)); -#endif - -static unsigned short do_csum(const unsigned char *buff, int len) -{ - register unsigned long sum = 0; - int swappem = 0; - - if (1 & (unsigned long)buff) { - sum = *buff << 8; - buff++; - len--; - ++swappem; - } - - while (len > 1) { - sum += *(unsigned short *)buff; - buff += 2; - len -= 2; - } - - if (len > 0) - sum += *buff; - - /* Fold 32-bit sum to 16 bits */ - while (sum >> 16) - sum = (sum & 0xffff) + (sum >> 16); - - if (swappem) - sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8); - - return sum; - -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl) -{ - return (__force __sum16)~do_csum(iph, ihl * 4); -} -EXPORT_SYMBOL(ip_fast_csum); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum) -{ - /* - * Just in case we get nasty checksum data... - * Like 0xffff6ec3 in the case of our IPv6 multicast header. - * We fold to begin with, as well as at the end. - */ - sum = (sum & 0xffff) + (sum >> 16); - - sum += do_csum(buff, len); - - sum = (sum & 0xffff) + (sum >> 16); - - return sum; -} -EXPORT_SYMBOL(csum_partial); - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff, len); -} -EXPORT_SYMBOL(ip_compute_csum); - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ - -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err) -{ - if (csum_err) - *csum_err = 0; - memcpy(dst, (__force void *)src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_from_user); - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ - -__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy); diff --git a/trunk/arch/blackfin/mach-bf518/Kconfig b/trunk/arch/blackfin/mach-bf518/Kconfig index 4c76fefb7a3b..4ab2d166c832 100644 --- a/trunk/arch/blackfin/mach-bf518/Kconfig +++ b/trunk/arch/blackfin/mach-bf518/Kconfig @@ -1,3 +1,7 @@ +config BF51x + def_bool y + depends on (BF512 || BF514 || BF516 || BF518) + if (BF51x) source "arch/blackfin/mach-bf518/boards/Kconfig" diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/blackfin.h b/trunk/arch/blackfin/mach-bf518/include/mach/blackfin.h index 6cfb246aebec..9053462be4b1 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/blackfin.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/blackfin.h @@ -58,10 +58,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF514.h index e1d99911025d..108fa4bde277 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF514.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF514.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF514_H @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF514.h" -/* include core specific register pointer definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ - -/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "cdefBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF514 that are not in the common header */ +/* BF514 is BF512 + RSI */ +#include "cdefBF512.h" /* Removable Storage Interface Registers */ diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF516.h index 6b364eda4947..2751592ef1c1 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF516.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF516.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF516_H @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF516.h" -/* include core specific register pointer definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */ - -/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "cdefBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF516 that are not in the common header */ +/* BF516 is BF514 + EMAC */ +#include "cdefBF514.h" /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ @@ -185,71 +178,4 @@ #define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) #define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) -/* Removable Storage Interface Registers */ - -#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL) -#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val) -#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL) -#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val) -#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) -#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) -#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) -#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) -#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) -#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) -#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) -#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) -#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) -#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) -#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) -#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) -#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) -#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) -#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) -#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) -#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) -#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) -#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL) -#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val) -#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) -#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) -#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) -#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) -#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL) -#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val) -#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) -#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) -#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) -#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) -#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) -#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) -#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL) -#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val) -#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) -#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) -#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT) -#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val) -#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK) -#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val) -#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG) -#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val) -#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) -#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) -#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) -#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) -#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) -#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) -#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) -#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) -#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) -#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) -#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4) -#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val) -#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5) -#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val) -#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6) -#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val) -#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7) -#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val) - #endif /* _CDEF_BF516_H */ diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF518.h index 929b90650bd4..7fb7f0eab990 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF518.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF518.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF518_H @@ -10,181 +10,10 @@ /* include all Core registers and bit definitions */ #include "defBF518.h" -/* include core specific register pointer definitions */ -#include +/* BF518 is BF516 + IEEE-1588 */ +#include "cdefBF516.h" -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */ - -/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "cdefBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF518 that are not in the common header */ - - -/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ - -#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) -#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) -#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) -#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val) -#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) -#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val) -#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) -#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val) -#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) -#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val) -#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) -#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val) -#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) -#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val) -#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) -#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val) -#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) -#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val) -#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) -#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val) -#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) -#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val) -#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) -#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val) -#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) -#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val) -#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) -#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val) -#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) -#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val) -#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) -#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val) -#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) -#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val) -#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) -#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val) -#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) -#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val) - -#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) -#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val) -#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) -#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val) -#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) -#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val) -#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) -#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val) -#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) -#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val) -#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) -#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val) -#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) -#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val) -#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) -#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val) - -#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) -#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val) -#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) -#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val) -#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) -#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val) -#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) -#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val) -#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) -#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val) - -#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) -#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val) -#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) -#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val) -#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) -#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val) -#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) -#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val) -#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) -#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val) -#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) -#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val) -#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) -#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val) -#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) -#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val) -#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) -#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val) -#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) -#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val) -#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) -#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val) -#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) -#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val) -#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) -#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val) -#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) -#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val) -#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) -#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val) -#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) -#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val) -#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) -#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val) -#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) -#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val) -#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) -#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val) -#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) -#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val) -#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) -#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val) -#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) -#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val) -#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) -#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val) -#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) -#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val) - -#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) -#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val) -#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) -#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val) -#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) -#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val) -#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) -#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val) -#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) -#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val) -#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) -#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val) -#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) -#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val) -#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) -#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val) -#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) -#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val) -#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) -#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val) -#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) -#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val) -#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) -#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val) -#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) -#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val) -#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) -#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val) -#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) -#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val) -#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) -#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val) -#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) -#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val) -#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) -#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val) -#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) -#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val) -#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) -#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val) -#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) -#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val) -#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) -#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) -#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) -#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) +/* PTP TSYNC Registers */ #define bfin_read_EMAC_PTP_CTL() bfin_read16(EMAC_PTP_CTL) #define bfin_write_EMAC_PTP_CTL(val) bfin_write16(EMAC_PTP_CTL, val) @@ -227,72 +56,4 @@ #define bfin_read_EMAC_PTP_PPS_PERIOD() bfin_read32(EMAC_PTP_PPS_PERIOD) #define bfin_write_EMAC_PTP_PPS_PERIOD(val) bfin_write32(EMAC_PTP_PPS_PERIOD, val) -/* Removable Storage Interface Registers */ - -#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL) -#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val) -#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL) -#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val) -#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) -#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) -#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) -#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) -#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) -#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) -#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) -#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) -#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) -#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) -#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) -#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) -#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) -#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) -#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) -#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) -#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) -#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) -#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL) -#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val) -#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) -#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) -#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) -#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) -#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL) -#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val) -#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) -#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) -#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) -#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) -#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) -#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) -#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL) -#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val) -#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) -#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) -#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT) -#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val) -#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK) -#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val) -#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG) -#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val) -#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) -#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) -#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) -#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) -#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) -#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) -#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) -#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) -#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) -#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) -#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4) -#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val) -#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5) -#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val) -#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6) -#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val) -#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7) -#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val) - - #endif /* _CDEF_BF518_H */ diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h index 1d970df7aee9..e548e9d1d6fa 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h @@ -131,23 +131,6 @@ #define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) -/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ -#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) -#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) -#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) -#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) -#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) -#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) -#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) -#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) -#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) -#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) -#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) -#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) -#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) -#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) - - /* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ #define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) #define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) @@ -844,6 +827,7 @@ #define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) #define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) #define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF) #define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) #define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) #define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) @@ -1062,17 +1046,6 @@ #define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) #define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) -/* OTP/FUSE Registers */ - -#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) -#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) -#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) -#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) -#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) -#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) -#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) -#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) - /* Security Registers */ #define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) @@ -1082,52 +1055,6 @@ #define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) #define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) -/* OTP Read/Write Data Buffer Registers */ - -#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) -#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) -#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) -#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) -#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) -#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) -#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) -#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) - -/* NFC Registers */ - -#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) -#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) -#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) -#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) -#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) -#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) -#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) -#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) -#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) -#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) -#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) -#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) -#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) -#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) -#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) -#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) -#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) -#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) -#define bfin_read_NFC_RST() bfin_read16(NFC_RST) -#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) -#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) -#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) -#define bfin_read_NFC_READ() bfin_read16(NFC_READ) -#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) -#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) -#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) -#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) -#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) -#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) -#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) -#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) -#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) - /* These need to be last due to the cdef/linux inter-dependencies */ #include diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/defBF514.h b/trunk/arch/blackfin/mach-bf518/include/mach/defBF514.h index b5adca23a788..92e950d6e996 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -7,49 +7,8 @@ #ifndef _DEF_BF514_H #define _DEF_BF514_H -/* Include all Core registers and bit definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ - -/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "defBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF514 that are not in the common header */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ -#define SDH_COMMAND 0xFFC0390C /* SDH Command */ -#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ -#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ -#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ -#define SDH_STATUS 0xFFC03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ -#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ -#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ -#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ -#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ +/* BF514 is BF512 + RSI */ +#include "defBF512.h" /* Removable Storage Interface Registers */ diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/defBF516.h b/trunk/arch/blackfin/mach-bf518/include/mach/defBF516.h index 7eb18774d727..22a3aa0d2629 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/defBF516.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/defBF516.h @@ -7,13 +7,8 @@ #ifndef _DEF_BF516_H #define _DEF_BF516_H -/* Include all Core registers and bit definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */ - -/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "defBF51x_base.h" +/* BF516 is BF514 + EMAC */ +#include "defBF514.h" /* The following are the #defines needed by ADSP-BF516 that are not in the common header */ /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ @@ -394,208 +389,4 @@ #define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ #define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ -/* SDH Registers */ - -#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ -#define SDH_COMMAND 0xFFC0390C /* SDH Command */ -#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ -#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ -#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ -#define SDH_STATUS 0xFFC03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ -#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ -#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ -#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ -#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ - -/* Removable Storage Interface Registers */ - -#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ -#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ -#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ -#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ -#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ -#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ -#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ -#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ -#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ -#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ -#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ -#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ -#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ -#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ -#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ -#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ -#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ -#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ -#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ -#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ -#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ -#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ -#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ -#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ -#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ -#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ -#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ -#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ -#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ -#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ -#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ -#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ - -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - #endif /* _DEF_BF516_H */ diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/defBF518.h b/trunk/arch/blackfin/mach-bf518/include/mach/defBF518.h index 794cf06eb5ba..cb18270e55c2 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/defBF518.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/defBF518.h @@ -7,461 +7,8 @@ #ifndef _DEF_BF518_H #define _DEF_BF518_H -/* Include all Core registers and bit definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */ - -/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "defBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF518 that are not in the common header */ -/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ - -#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ -#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ -#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ -#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ -#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ -#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ -#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ -#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ -#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ -#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ -#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ -#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ -#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ -#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ -#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ -#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ -#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ -#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ -#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ - -#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ -#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ -#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ -#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ -#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ -#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ -#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ -#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ - -#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ -#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ -#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ -#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ -#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ - -#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ -#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ -#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ -#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ -#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ -#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ -#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ -#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ -#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ -#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ -#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ -#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ -#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ -#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ -#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ -#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ -#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ -#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ -#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ -#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ -#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ -#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ -#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ -#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ - -#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ -#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ -#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ -#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ -#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ -#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ -#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ -#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ -#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ -#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ -#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ -#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ -#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ -#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ -#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ -#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ -#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ -#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ -#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ -#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ -#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ -#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ -#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ - -/* Listing for IEEE-Supported Count Registers */ - -#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ -#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ -#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ -#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ -#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ -#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ -#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ -#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ -#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ -#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ -#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ -#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ -#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ -#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ -#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ -#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ -#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ -#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ -#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ -#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ -#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ -#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ -#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ -#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ - -#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ -#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ -#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ -#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ -#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ -#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ -#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ -#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ -#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ -#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ -#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ -#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ -#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ -#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ -#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ -#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ -#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ -#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ -#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ -#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ -#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ -#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ -#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ - -/*********************************************************************************** -** System MMR Register Bits And Macros -** -** Disclaimer: All macros are intended to make C and Assembly code more readable. -** Use these macros carefully, as any that do left shifts for field -** depositing will result in the lower order bits being destroyed. Any -** macro that shifts left to properly position the bit-field should be -** used as part of an OR to initialize a register and NOT as a dynamic -** modifier UNLESS the lower order bits are saved and ORed back in when -** the macro is used. -*************************************************************************************/ - -/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ - -/* EMAC_OPMODE Masks */ - -#define RE 0x00000001 /* Receiver Enable */ -#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ -#define HU 0x00000010 /* Hash Filter Unicast Address */ -#define HM 0x00000020 /* Hash Filter Multicast Address */ -#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ -#define PR 0x00000080 /* Promiscuous Mode Enable */ -#define IFE 0x00000100 /* Inverse Filtering Enable */ -#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ -#define PBF 0x00000400 /* Pass Bad Frames Enable */ -#define PSF 0x00000800 /* Pass Short Frames Enable */ -#define RAF 0x00001000 /* Receive-All Mode */ -#define TE 0x00010000 /* Transmitter Enable */ -#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ -#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ -#define DC 0x00080000 /* Deferral Check */ -#define BOLMT 0x00300000 /* Back-Off Limit */ -#define BOLMT_10 0x00000000 /* 10-bit range */ -#define BOLMT_8 0x00100000 /* 8-bit range */ -#define BOLMT_4 0x00200000 /* 4-bit range */ -#define BOLMT_1 0x00300000 /* 1-bit range */ -#define DRTY 0x00400000 /* Disable TX Retry On Collision */ -#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ -#define RMII 0x01000000 /* RMII/MII* Mode */ -#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ -#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ -#define LB 0x08000000 /* Internal Loopback Enable */ -#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ - -/* EMAC_STAADD Masks */ - -#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ -#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ -#define STADISPRE 0x00000004 /* Disable Preamble Generation */ -#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ -#define REGAD 0x000007C0 /* STA Register Address */ -#define PHYAD 0x0000F800 /* PHY Device Address */ - -#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ -#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ - -/* EMAC_STADAT Mask */ - -#define STADATA 0x0000FFFF /* Station Management Data */ - -/* EMAC_FLC Masks */ - -#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ -#define FLCE 0x00000002 /* Flow Control Enable */ -#define PCF 0x00000004 /* Pass Control Frames */ -#define BKPRSEN 0x00000008 /* Enable Backpressure */ -#define FLCPAUSE 0xFFFF0000 /* Pause Time */ - -#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ - -/* EMAC_WKUP_CTL Masks */ - -#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ -#define MPKE 0x00000002 /* Magic Packet Enable */ -#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ -#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ -#define MPKS 0x00000020 /* Magic Packet Received Status */ -#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ - -/* EMAC_WKUP_FFCMD Masks */ - -#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ -#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ -#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ -#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ -#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ -#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ -#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ -#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ - -/* EMAC_WKUP_FFOFF Masks */ - -#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ -#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ -#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ -#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ - -#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ -#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ -#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ -#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ -/* Set ALL Offsets */ -#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) - -/* EMAC_WKUP_FFCRC0 Masks */ - -#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ -#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ - -#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ -#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ - -/* EMAC_WKUP_FFCRC1 Masks */ - -#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ -#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ - -#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ -#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ - -/* EMAC_SYSCTL Masks */ - -#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ -#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ -#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ -#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ -#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ - -#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ - -/* EMAC_SYSTAT Masks */ - -#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ -#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ -#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ -#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ -#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ -#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ -#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ -#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ - -/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ - -#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ -#define RX_COMP 0x00001000 /* RX Frame Complete */ -#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ -#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ -#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ -#define RX_CRC 0x00010000 /* RX Frame CRC Error */ -#define RX_LEN 0x00020000 /* RX Frame Length Error */ -#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ -#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ -#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ -#define RX_PHY 0x00200000 /* RX Frame PHY Error */ -#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ -#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ -#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ -#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ -#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ -#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ -#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ -#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ -#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ -#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ - -/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ - -#define TX_COMP 0x00000001 /* TX Frame Complete */ -#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ -#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ -#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ -#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ -#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ -#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ -#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ -#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ -#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ -#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ -#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ -#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ -#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ -#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ - -/* EMAC_MMC_CTL Masks */ -#define RSTC 0x00000001 /* Reset All Counters */ -#define CROLL 0x00000002 /* Counter Roll-Over Enable */ -#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ -#define MMCE 0x00000008 /* Enable MMC Counter Operation */ - -/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ -#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ -#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ -#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ -#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ -#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ -#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ -#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ -#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ -#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ -#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ -#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ -#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ -#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ -#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ -#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ -#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ -#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ -#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ -#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ -#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ -#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ -#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ -#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ -#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ - -/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ - -#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ -#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ -#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ -#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ -#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ -#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ -#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ -#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ -#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ -#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ -#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ -#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ -#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ -#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ -#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ -#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ -#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ -#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ -#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ -#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ -#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ -#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ -#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ -#define SDH_COMMAND 0xFFC0390C /* SDH Command */ -#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ -#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ -#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ -#define SDH_STATUS 0xFFC03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ -#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ -#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ -#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ -#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ - -/* Removable Storage Interface Registers */ - -#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ -#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ -#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ -#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ -#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ -#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ -#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ -#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ -#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ -#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ -#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ -#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ -#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ -#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ -#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ -#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ -#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ -#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ -#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ -#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ -#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ -#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ -#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ -#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ -#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ -#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ -#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ -#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ -#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ -#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ -#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ -#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ +/* BF518 is BF516 + IEEE-1588 */ +#include "defBF516.h" /* PTP TSYNC Registers */ @@ -489,141 +36,6 @@ #define EMAC_PTP_PPS_STARTHI 0xFFC030F4 /* PPS Start Time High */ #define EMAC_PTP_PPS_PERIOD 0xFFC030F8 /* PPS Count Register */ -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - /* Bit masks for EMAC_PTP_CTL */ #define PTP_EN 0x1 /* Enable the PTP_TSYNC module */ diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/trunk/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index f9fd2b2a2956..9241205fb992 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -585,58 +585,6 @@ ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ -/* -** ********************* PLL AND RESET MASKS ****************************************/ -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* VR_CTL Masks */ -#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ -#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ -#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ -#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ -#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 @@ -756,66 +704,6 @@ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ -/* ********* WATCHDOG TIMER MASKS ******************** */ - -/* Watchdog Timer WDOG_CTL Register Masks */ - -#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ -#define WDEV_RESET 0x0000 /* generate reset event on roll over */ -#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ -#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ -#define WDEV_NONE 0x0006 /* no event on roll over */ -#define WDEN 0x0FF0 /* enable watchdog */ -#define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ - -/* depreciated WDOG_CTL Register Masks for legacy code */ - - -#define ICTL WDEV -#define ENABLE_RESET WDEV_RESET -#define WDOG_RESET WDEV_RESET -#define ENABLE_NMI WDEV_NMI -#define WDOG_NMI WDEV_NMI -#define ENABLE_GPI WDEV_GPI -#define WDOG_GPI WDEV_GPI -#define DISABLE_EVT WDEV_NONE -#define WDOG_NONE WDEV_NONE - -#define TMR_EN WDEN -#define TMR_DIS WDDIS -#define TRO WDRO -#define ICTL_P0 0x01 - #define ICTL_P1 0x02 -#define TRO_P 0x0F - - - -/* *************** REAL TIME CLOCK MASKS **************************/ -/* RTC_STAT and RTC_ALARM Masks */ -#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ -#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ -#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ -#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ - -/* RTC_ALARM Macro z=day y=hr x=min w=sec */ -#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) - -/* RTC_ICTL and RTC_ISTAT Masks */ -#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ -#define ALARM 0x0002 /* Alarm Interrupt Enable */ -#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MINUTE 0x0008 /* Minutes Interrupt Enable */ -#define HOUR 0x0010 /* Hours Interrupt Enable */ -#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WRITE_PENDING 0x4000 /* Write Pending Status */ -#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ - -/* RTC_FAST / RTC_PREN Mask */ -#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ - - /* ************** UART CONTROLLER MASKS *************************/ /* UARTx_LCR Masks */ #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ @@ -1372,33 +1260,6 @@ /* ************************** DMA CONTROLLER MASKS ********************************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define RESTART 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ @@ -1416,13 +1277,6 @@ #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ - - /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ /* PPI_CONTROL Masks */ #define PORT_EN 0x0001 /* PPI Port Enable */ @@ -1830,46 +1684,6 @@ #define BNDMODE_CAPT 0x2000 /* boundary capture mode */ #define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ -/* Bit masks for OTP_CONTROL */ - -#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ -#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define nFIEN 0x0 -#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define nFTESTDEC 0x0 -#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define nFWRTEST 0x0 -#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define nFRDEN 0x0 -#define FWREN 0x8000 /* OTP/Fuse Write Enable */ -#define nFWREN 0x0 - -/* Bit masks for OTP_BEN */ - -#define FBEN 0xffff /* OTP/Fuse Byte Enable */ - -/* Bit masks for OTP_STATUS */ - -#define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define nFCOMP 0x0 -#define FERROR 0x2 /* OTP/Fuse Access Error */ -#define nFERROR 0x0 -#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define nMMRGLOAD 0x0 -#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define nMMRGLOCK 0x0 -#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ -#define nFPGMEN 0x0 - -/* Bit masks for OTP_TIMING */ - -#define USECDIV 0xff /* Micro Second Divider */ -#define READACC 0x7f00 /* Read Access Time */ -#define CPUMPRL 0x38000 /* Charge Pump Release Time */ -#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ -#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ -#define PGMTIME 0xff000000 /* Program Time */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ diff --git a/trunk/arch/blackfin/mach-bf527/Kconfig b/trunk/arch/blackfin/mach-bf527/Kconfig index 848ac6f86823..1f8cbe9d6b9a 100644 --- a/trunk/arch/blackfin/mach-bf527/Kconfig +++ b/trunk/arch/blackfin/mach-bf527/Kconfig @@ -1,3 +1,7 @@ +config BF52x + def_bool y + depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) + if (BF52x) source "arch/blackfin/mach-bf527/boards/Kconfig" diff --git a/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c b/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c index f1996b13a3da..7ab0800e2914 100644 --- a/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -15,9 +15,6 @@ #include #include #include -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include -#endif #include #include #include @@ -65,7 +62,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -317,45 +314,6 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -841,10 +799,6 @@ static struct platform_device *cmbf527_devices[] __initdata = { &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) &bfin_isp1760_device, #endif diff --git a/trunk/arch/blackfin/mach-bf527/boards/ezkit.c b/trunk/arch/blackfin/mach-bf527/boards/ezkit.c index f09665f74ba0..5294fdd20732 100644 --- a/trunk/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/trunk/arch/blackfin/mach-bf527/boards/ezkit.c @@ -13,9 +13,6 @@ #include #include #include -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include -#endif #include #include #include @@ -63,7 +60,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -373,45 +370,6 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -688,12 +646,6 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-lq035", -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 @@ -850,7 +802,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) #include #include @@ -924,10 +876,6 @@ static struct platform_device *stamp_devices[] __initdata = { &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) &bfin_isp1760_device, #endif @@ -957,10 +905,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) - &bfin_fb_device, -#endif - #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) &bf52x_t350mcqb_device, #endif @@ -991,7 +935,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_device_gpiokeys, #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) &bfin_rotary_device, #endif diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/blackfin.h b/trunk/arch/blackfin/mach-bf527/include/mach/blackfin.h index e7d6034f268f..f714c5de3073 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/blackfin.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/blackfin.h @@ -46,10 +46,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF525.h index dc3119e9f663..d7e2751c6bcc 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF525.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF525.h @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF525.h" -/* include core specific register pointer definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ - -/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "cdefBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ +/* BF525 is BF522 + USB */ +#include "cdefBF522.h" /* USB Control Registers */ diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF527.h index d6579449ee46..c7ba544d50b6 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF527.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF527.h @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF527.h" -/* include core specific register pointer definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ - -/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "cdefBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ +/* BF527 is BF525 + EMAC */ +#include "cdefBF525.h" /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ @@ -185,417 +178,4 @@ #define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) #define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) -/* USB Control Registers */ - -#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) -#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) -#define bfin_read_USB_POWER() bfin_read16(USB_POWER) -#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) -#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) -#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) -#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) -#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) -#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) -#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) -#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) -#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) -#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) -#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) -#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) -#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) -#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) -#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) -#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) -#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) -#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) -#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) -#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) -#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) - -/* USB Packet Control Registers */ - -#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) -#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) -#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) -#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) -#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) -#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) -#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) -#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) -#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) -#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) -#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) -#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) -#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) -#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) -#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) -#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) -#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) -#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) -#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) -#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) -#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) -#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) -#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) -#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) -#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) -#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) - -/* USB Endpoint FIFO Registers */ - -#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) -#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) -#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) -#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) -#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) -#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) -#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) -#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) -#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) -#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) -#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) -#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) -#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) -#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) -#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) -#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) - -/* USB OTG Control Registers */ - -#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) -#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) -#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) -#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) -#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) - -/* USB Phy Control Registers */ - -#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) -#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) -#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) -#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) -#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) -#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) -#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) -#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) -#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) -#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) - -/* (APHY_CNTRL is for ADI usage only) */ - -#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) -#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) - -/* (APHY_CALIB is for ADI usage only) */ - -#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) -#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) - -#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) -#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) - -/* (PHY_TEST is for ADI usage only) */ - -#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) -#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) - -#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) -#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) -#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) -#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) - -/* USB Endpoint 0 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) -#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) -#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) -#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) -#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) -#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) -#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) -#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) -#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) -#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) -#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) -#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) -#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) -#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) -#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) -#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) -#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) -#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) -#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) -#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) - -/* USB Endpoint 1 Control Registers */ - -#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) -#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) -#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) -#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) -#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) -#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) -#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) -#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) -#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) -#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) -#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) -#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) -#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) -#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) -#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) -#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) -#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) -#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) -#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) - -/* USB Endpoint 2 Control Registers */ - -#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) -#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) -#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) -#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) -#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) -#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) -#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) -#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) -#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) -#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) -#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) -#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) -#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) -#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) -#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) -#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) -#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) -#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) -#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) - -/* USB Endpoint 3 Control Registers */ - -#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) -#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) -#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) -#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) -#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) -#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) -#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) -#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) -#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) -#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) -#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) -#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) -#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) -#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) -#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) -#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) -#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) -#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) -#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) - -/* USB Endpoint 4 Control Registers */ - -#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) -#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) -#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) -#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) -#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) -#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) -#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) -#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) -#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) -#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) -#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) -#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) -#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) -#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) -#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) -#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) -#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) -#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) -#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) - -/* USB Endpoint 5 Control Registers */ - -#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) -#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) -#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) -#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) -#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) -#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) -#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) -#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) -#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) -#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) -#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) -#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) -#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) -#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) -#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) -#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) -#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) -#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) -#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) - -/* USB Endpoint 6 Control Registers */ - -#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) -#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) -#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) -#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) -#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) -#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) -#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) -#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) -#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) -#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) -#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) -#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) -#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) -#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) -#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) -#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) -#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) -#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) -#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) - -/* USB Endpoint 7 Control Registers */ - -#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) -#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) -#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) -#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) -#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) -#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) -#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) -#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) -#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) -#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) -#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) -#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) -#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) -#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) -#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) -#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) -#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) -#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) -#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) - -#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) -#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) - -/* USB Channel 0 Config Registers */ - -#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) -#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) -#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) -#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) -#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) -#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) -#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) -#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) -#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) -#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) - -/* USB Channel 1 Config Registers */ - -#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) -#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) -#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) -#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) -#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) -#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) -#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) -#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) -#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) -#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) - -/* USB Channel 2 Config Registers */ - -#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) -#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) -#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) -#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) -#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) -#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) -#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) -#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) -#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) -#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) - -/* USB Channel 3 Config Registers */ - -#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) -#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) -#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) -#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) -#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) -#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) -#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) -#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) -#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) -#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) - -/* USB Channel 4 Config Registers */ - -#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) -#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) -#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) -#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) -#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) -#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) -#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) -#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) -#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) -#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) - -/* USB Channel 5 Config Registers */ - -#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) -#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) -#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) -#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) -#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) -#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) -#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) -#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) -#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) - -/* USB Channel 6 Config Registers */ - -#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) -#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) -#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) -#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) -#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) -#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) -#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) -#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) -#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) -#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) - -/* USB Channel 7 Config Registers */ - -#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) -#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) -#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) -#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) -#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) -#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) -#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) -#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) -#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) -#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) - #endif /* _CDEF_BF527_H */ diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h index 7014dde10dd6..12f2ad45314e 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -844,6 +844,7 @@ #define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) #define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) #define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF) #define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) #define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) #define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) @@ -1062,17 +1063,6 @@ #define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) #define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) -/* OTP/FUSE Registers */ - -#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) -#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) -#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) -#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) -#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) -#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) -#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) -#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) - /* Security Registers */ #define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) @@ -1082,17 +1072,6 @@ #define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) #define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) -/* OTP Read/Write Data Buffer Registers */ - -#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) -#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) -#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) -#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) -#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) -#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) -#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) -#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) - /* NFC Registers */ #define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/defBF525.h b/trunk/arch/blackfin/mach-bf527/include/mach/defBF525.h index 82abefc1ef6c..c136f7032962 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/defBF525.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -7,15 +7,8 @@ #ifndef _DEF_BF525_H #define _DEF_BF525_H -/* Include all Core registers and bit definitions */ -#include - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ - -/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "defBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ +/* BF525 is BF522 + USB */ +#include "defBF522.h" /* USB Control Registers */ diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/defBF527.h b/trunk/arch/blackfin/mach-bf527/include/mach/defBF527.h index 570a125df025..4dd58fb33156 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/defBF527.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -7,15 +7,9 @@ #ifndef _DEF_BF527_H #define _DEF_BF527_H -/* Include all Core registers and bit definitions */ -#include +/* BF527 is BF525 + EMAC */ +#include "defBF525.h" -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ - -/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "defBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ #define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ @@ -394,673 +388,4 @@ #define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ #define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ -/* USB Control Registers */ - -#define USB_FADDR 0xffc03800 /* Function address register */ -#define USB_POWER 0xffc03804 /* Power management register */ -#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ -#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ -#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ -#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ -#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ -#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ -#define USB_FRAME 0xffc03820 /* USB frame number */ -#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ -#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ -#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ -#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ - -/* USB Packet Control Registers */ - -#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ -#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ -#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ -#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ -#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ -#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ -#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* USB Endpoint FIFO Registers */ - -#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ -#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ -#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ -#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ -#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ -#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ -#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ -#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ - -/* USB OTG Control Registers */ - -#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ -#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ -#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ - -/* USB Phy Control Registers */ - -#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ -#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ -#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ -#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ -#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ - -/* (APHY_CNTRL is for ADI usage only) */ - -#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ - -/* (APHY_CALIB is for ADI usage only) */ - -#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ - -#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ - -/* (PHY_TEST is for ADI usage only) */ - -#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ - -#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ -#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ - -/* USB Endpoint 0 Control Registers */ - -#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ -#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ -#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ -#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ -#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ -#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ -#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ -#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ - -/* USB Endpoint 1 Control Registers */ - -#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ -#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ -#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ -#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ -#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ -#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ -#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ -#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ - -/* USB Endpoint 2 Control Registers */ - -#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ -#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ -#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ -#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ -#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ -#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ -#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ -#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ - -/* USB Endpoint 3 Control Registers */ - -#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ -#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ -#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ -#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ -#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ -#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ -#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ -#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ - -/* USB Endpoint 4 Control Registers */ - -#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ -#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ -#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ -#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ -#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ -#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ -#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ -#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ - -/* USB Endpoint 5 Control Registers */ - -#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ -#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ -#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ -#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ -#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ -#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ -#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ -#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ - -/* USB Endpoint 6 Control Registers */ - -#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ -#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ -#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ -#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ -#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ -#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ -#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ -#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ - -/* USB Endpoint 7 Control Registers */ - -#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ -#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ -#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ -#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ -#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ -#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ - -#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ - -/* USB Channel 0 Config Registers */ - -#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ -#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ - -/* USB Channel 1 Config Registers */ - -#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ -#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ - -/* USB Channel 2 Config Registers */ - -#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ -#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ - -/* USB Channel 3 Config Registers */ - -#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ -#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ - -/* USB Channel 4 Config Registers */ - -#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ -#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ - -/* USB Channel 5 Config Registers */ - -#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ -#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ - -/* USB Channel 6 Config Registers */ - -#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ -#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ - -/* USB Channel 7 Config Registers */ - -#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ -#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ -#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ - -/* Bit masks for USB_FADDR */ - -#define FUNCTION_ADDRESS 0x7f /* Function address */ - -/* Bit masks for USB_POWER */ - -#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define nENABLE_SUSPENDM 0x0 -#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define nSUSPEND_MODE 0x0 -#define RESUME_MODE 0x4 /* DMA Mode */ -#define nRESUME_MODE 0x0 -#define RESET 0x8 /* Reset indicator */ -#define nRESET 0x0 -#define HS_MODE 0x10 /* High Speed mode indicator */ -#define nHS_MODE 0x0 -#define HS_ENABLE 0x20 /* high Speed Enable */ -#define nHS_ENABLE 0x0 -#define SOFT_CONN 0x40 /* Soft connect */ -#define nSOFT_CONN 0x0 -#define ISO_UPDATE 0x80 /* Isochronous update */ -#define nISO_UPDATE 0x0 - -/* Bit masks for USB_INTRTX */ - -#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define nEP0_TX 0x0 -#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define nEP1_TX 0x0 -#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define nEP2_TX 0x0 -#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define nEP3_TX 0x0 -#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define nEP4_TX 0x0 -#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define nEP5_TX 0x0 -#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define nEP6_TX 0x0 -#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ -#define nEP7_TX 0x0 - -/* Bit masks for USB_INTRRX */ - -#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define nEP1_RX 0x0 -#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define nEP2_RX 0x0 -#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define nEP3_RX 0x0 -#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define nEP4_RX 0x0 -#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define nEP5_RX 0x0 -#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define nEP6_RX 0x0 -#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ -#define nEP7_RX 0x0 - -/* Bit masks for USB_INTRTXE */ - -#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define nEP0_TX_E 0x0 -#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define nEP1_TX_E 0x0 -#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define nEP2_TX_E 0x0 -#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define nEP3_TX_E 0x0 -#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define nEP4_TX_E 0x0 -#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define nEP5_TX_E 0x0 -#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define nEP6_TX_E 0x0 -#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ -#define nEP7_TX_E 0x0 - -/* Bit masks for USB_INTRRXE */ - -#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define nEP1_RX_E 0x0 -#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define nEP2_RX_E 0x0 -#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define nEP3_RX_E 0x0 -#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define nEP4_RX_E 0x0 -#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define nEP5_RX_E 0x0 -#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define nEP6_RX_E 0x0 -#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ -#define nEP7_RX_E 0x0 - -/* Bit masks for USB_INTRUSB */ - -#define SUSPEND_B 0x1 /* Suspend indicator */ -#define nSUSPEND_B 0x0 -#define RESUME_B 0x2 /* Resume indicator */ -#define nRESUME_B 0x0 -#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define nRESET_OR_BABLE_B 0x0 -#define SOF_B 0x8 /* Start of frame */ -#define nSOF_B 0x0 -#define CONN_B 0x10 /* Connection indicator */ -#define nCONN_B 0x0 -#define DISCON_B 0x20 /* Disconnect indicator */ -#define nDISCON_B 0x0 -#define SESSION_REQ_B 0x40 /* Session Request */ -#define nSESSION_REQ_B 0x0 -#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ -#define nVBUS_ERROR_B 0x0 - -/* Bit masks for USB_INTRUSBE */ - -#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define nSUSPEND_BE 0x0 -#define RESUME_BE 0x2 /* Resume indicator int enable */ -#define nRESUME_BE 0x0 -#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define nRESET_OR_BABLE_BE 0x0 -#define SOF_BE 0x8 /* Start of frame int enable */ -#define nSOF_BE 0x0 -#define CONN_BE 0x10 /* Connection indicator int enable */ -#define nCONN_BE 0x0 -#define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define nDISCON_BE 0x0 -#define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define nSESSION_REQ_BE 0x0 -#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ -#define nVBUS_ERROR_BE 0x0 - -/* Bit masks for USB_FRAME */ - -#define FRAME_NUMBER 0x7ff /* Frame number */ - -/* Bit masks for USB_INDEX */ - -#define SELECTED_ENDPOINT 0xf /* selected endpoint */ - -/* Bit masks for USB_GLOBAL_CTL */ - -#define GLOBAL_ENA 0x1 /* enables USB module */ -#define nGLOBAL_ENA 0x0 -#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define nEP1_TX_ENA 0x0 -#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define nEP2_TX_ENA 0x0 -#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define nEP3_TX_ENA 0x0 -#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define nEP4_TX_ENA 0x0 -#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define nEP5_TX_ENA 0x0 -#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define nEP6_TX_ENA 0x0 -#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define nEP7_TX_ENA 0x0 -#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define nEP1_RX_ENA 0x0 -#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define nEP2_RX_ENA 0x0 -#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define nEP3_RX_ENA 0x0 -#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define nEP4_RX_ENA 0x0 -#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define nEP5_RX_ENA 0x0 -#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define nEP6_RX_ENA 0x0 -#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ -#define nEP7_RX_ENA 0x0 - -/* Bit masks for USB_OTG_DEV_CTL */ - -#define SESSION 0x1 /* session indicator */ -#define nSESSION 0x0 -#define HOST_REQ 0x2 /* Host negotiation request */ -#define nHOST_REQ 0x0 -#define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define nHOST_MODE 0x0 -#define VBUS0 0x8 /* Vbus level indicator[0] */ -#define nVBUS0 0x0 -#define VBUS1 0x10 /* Vbus level indicator[1] */ -#define nVBUS1 0x0 -#define LSDEV 0x20 /* Low-speed indicator */ -#define nLSDEV 0x0 -#define FSDEV 0x40 /* Full or High-speed indicator */ -#define nFSDEV 0x0 -#define B_DEVICE 0x80 /* A' or 'B' device indicator */ -#define nB_DEVICE 0x0 - -/* Bit masks for USB_OTG_VBUS_IRQ */ - -#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define nDRIVE_VBUS_ON 0x0 -#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define nDRIVE_VBUS_OFF 0x0 -#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define nCHRG_VBUS_START 0x0 -#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define nCHRG_VBUS_END 0x0 -#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define nDISCHRG_VBUS_START 0x0 -#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ -#define nDISCHRG_VBUS_END 0x0 - -/* Bit masks for USB_OTG_VBUS_MASK */ - -#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define nDRIVE_VBUS_ON_ENA 0x0 -#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define nDRIVE_VBUS_OFF_ENA 0x0 -#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define nCHRG_VBUS_START_ENA 0x0 -#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define nCHRG_VBUS_END_ENA 0x0 -#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define nDISCHRG_VBUS_START_ENA 0x0 -#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ -#define nDISCHRG_VBUS_END_ENA 0x0 - -/* Bit masks for USB_CSR0 */ - -#define RXPKTRDY 0x1 /* data packet receive indicator */ -#define nRXPKTRDY 0x0 -#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define nTXPKTRDY 0x0 -#define STALL_SENT 0x4 /* STALL handshake sent */ -#define nSTALL_SENT 0x0 -#define DATAEND 0x8 /* Data end indicator */ -#define nDATAEND 0x0 -#define SETUPEND 0x10 /* Setup end */ -#define nSETUPEND 0x0 -#define SENDSTALL 0x20 /* Send STALL handshake */ -#define nSENDSTALL 0x0 -#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define nSERVICED_RXPKTRDY 0x0 -#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define nSERVICED_SETUPEND 0x0 -#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define nFLUSHFIFO 0x0 -#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define nSTALL_RECEIVED_H 0x0 -#define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define nSETUPPKT_H 0x0 -#define ERROR_H 0x10 /* timeout error indicator host mode */ -#define nERROR_H 0x0 -#define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define nREQPKT_H 0x0 -#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define nSTATUSPKT_H 0x0 -#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ -#define nNAK_TIMEOUT_H 0x0 - -/* Bit masks for USB_COUNT0 */ - -#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ - -/* Bit masks for USB_NAKLIMIT0 */ - -#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ - -/* Bit masks for USB_TX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_RX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_TXCSR */ - -#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define nTXPKTRDY_T 0x0 -#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define nFIFO_NOT_EMPTY_T 0x0 -#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define nUNDERRUN_T 0x0 -#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define nFLUSHFIFO_T 0x0 -#define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define nSTALL_SEND_T 0x0 -#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define nSTALL_SENT_T 0x0 -#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_T 0x0 -#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define nINCOMPTX_T 0x0 -#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_T 0x0 -#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define nFORCE_DATATOGGLE_T 0x0 -#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_T 0x0 -#define ISO_T 0x4000 /* enable Isochronous transfers */ -#define nISO_T 0x0 -#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOSET_T 0x0 -#define ERROR_TH 0x4 /* error condition host mode */ -#define nERROR_TH 0x0 -#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_TH 0x0 -#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ -#define nNAK_TIMEOUT_TH 0x0 - -/* Bit masks for USB_TXCOUNT */ - -#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* Bit masks for USB_RXCSR */ - -#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define nRXPKTRDY_R 0x0 -#define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define nFIFO_FULL_R 0x0 -#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define nOVERRUN_R 0x0 -#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define nDATAERROR_R 0x0 -#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define nFLUSHFIFO_R 0x0 -#define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define nSTALL_SEND_R 0x0 -#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define nSTALL_SENT_R 0x0 -#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_R 0x0 -#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define nINCOMPRX_R 0x0 -#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_R 0x0 -#define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define nDISNYET_R 0x0 -#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_R 0x0 -#define ISO_R 0x4000 /* enable Isochronous transfers */ -#define nISO_R 0x0 -#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOCLEAR_R 0x0 -#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define nERROR_RH 0x0 -#define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define nREQPKT_RH 0x0 -#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_RH 0x0 -#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define nINCOMPRX_RH 0x0 -#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define nDMAREQMODE_RH 0x0 -#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ -#define nAUTOREQ_RH 0x0 - -/* Bit masks for USB_RXCOUNT */ - -#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ - -/* Bit masks for USB_TXTYPE */ - -#define TARGET_EP_NO_T 0xf /* EP number */ -#define PROTOCOL_T 0xc /* transfer type */ - -/* Bit masks for USB_TXINTERVAL */ - -#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ - -/* Bit masks for USB_RXTYPE */ - -#define TARGET_EP_NO_R 0xf /* EP number */ -#define PROTOCOL_R 0xc /* transfer type */ - -/* Bit masks for USB_RXINTERVAL */ - -#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ - -/* Bit masks for USB_DMA_INTERRUPT */ - -#define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define nDMA0_INT 0x0 -#define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define nDMA1_INT 0x0 -#define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define nDMA2_INT 0x0 -#define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define nDMA3_INT 0x0 -#define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define nDMA4_INT 0x0 -#define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define nDMA5_INT 0x0 -#define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define nDMA6_INT 0x0 -#define DMA7_INT 0x80 /* DMA7 pending interrupt */ -#define nDMA7_INT 0x0 - -/* Bit masks for USB_DMAxCONTROL */ - -#define DMA_ENA 0x1 /* DMA enable */ -#define nDMA_ENA 0x0 -#define DIRECTION 0x2 /* direction of DMA transfer */ -#define nDIRECTION 0x0 -#define MODE 0x4 /* DMA Bus error */ -#define nMODE 0x0 -#define INT_ENA 0x8 /* Interrupt enable */ -#define nINT_ENA 0x0 -#define EPNUM 0xf0 /* EP number */ -#define BUSERROR 0x100 /* DMA Bus error */ -#define nBUSERROR 0x0 - -/* Bit masks for USB_DMAxADDRHIGH */ - -#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxADDRLOW */ - -#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTHIGH */ - -#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTLOW */ - -#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ - #endif /* _DEF_BF527_H */ diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/trunk/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index b9dbb73d7ef0..8b18b5359210 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -586,58 +586,6 @@ ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ -/* -** ********************* PLL AND RESET MASKS ****************************************/ -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* VR_CTL Masks */ -#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ -#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ -#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ -#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ -#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 @@ -757,66 +705,6 @@ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ -/* ********* WATCHDOG TIMER MASKS ******************** */ - -/* Watchdog Timer WDOG_CTL Register Masks */ - -#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ -#define WDEV_RESET 0x0000 /* generate reset event on roll over */ -#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ -#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ -#define WDEV_NONE 0x0006 /* no event on roll over */ -#define WDEN 0x0FF0 /* enable watchdog */ -#define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ - -/* depreciated WDOG_CTL Register Masks for legacy code */ - - -#define ICTL WDEV -#define ENABLE_RESET WDEV_RESET -#define WDOG_RESET WDEV_RESET -#define ENABLE_NMI WDEV_NMI -#define WDOG_NMI WDEV_NMI -#define ENABLE_GPI WDEV_GPI -#define WDOG_GPI WDEV_GPI -#define DISABLE_EVT WDEV_NONE -#define WDOG_NONE WDEV_NONE - -#define TMR_EN WDEN -#define TMR_DIS WDDIS -#define TRO WDRO -#define ICTL_P0 0x01 - #define ICTL_P1 0x02 -#define TRO_P 0x0F - - - -/* *************** REAL TIME CLOCK MASKS **************************/ -/* RTC_STAT and RTC_ALARM Masks */ -#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ -#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ -#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ -#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ - -/* RTC_ALARM Macro z=day y=hr x=min w=sec */ -#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) - -/* RTC_ICTL and RTC_ISTAT Masks */ -#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ -#define ALARM 0x0002 /* Alarm Interrupt Enable */ -#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MINUTE 0x0008 /* Minutes Interrupt Enable */ -#define HOUR 0x0010 /* Hours Interrupt Enable */ -#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WRITE_PENDING 0x4000 /* Write Pending Status */ -#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ - -/* RTC_FAST / RTC_PREN Mask */ -#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ - - /* ************** UART CONTROLLER MASKS *************************/ /* UARTx_LCR Masks */ #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ @@ -1381,33 +1269,6 @@ /* ************************** DMA CONTROLLER MASKS ********************************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define RESTART 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ @@ -1425,13 +1286,6 @@ #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ - - /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ /* PPI_CONTROL Masks */ #define PORT_EN 0x0001 /* PPI Port Enable */ @@ -1843,46 +1697,6 @@ #define BNDMODE_CAPT 0x2000 /* boundary capture mode */ #define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ -/* Bit masks for OTP_CONTROL */ - -#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ -#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define nFIEN 0x0 -#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define nFTESTDEC 0x0 -#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define nFWRTEST 0x0 -#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define nFRDEN 0x0 -#define FWREN 0x8000 /* OTP/Fuse Write Enable */ -#define nFWREN 0x0 - -/* Bit masks for OTP_BEN */ - -#define FBEN 0xffff /* OTP/Fuse Byte Enable */ - -/* Bit masks for OTP_STATUS */ - -#define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define nFCOMP 0x0 -#define FERROR 0x2 /* OTP/Fuse Access Error */ -#define nFERROR 0x0 -#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define nMMRGLOAD 0x0 -#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define nMMRGLOCK 0x0 -#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ -#define nFPGMEN 0x0 - -/* Bit masks for OTP_TIMING */ - -#define USECDIV 0xff /* Micro Second Divider */ -#define READACC 0x7f00 /* Read Access Time */ -#define CPUMPRL 0x38000 /* Charge Pump Release Time */ -#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ -#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ -#define PGMTIME 0xff000000 /* Program Time */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ diff --git a/trunk/arch/blackfin/mach-bf533/boards/H8606.c b/trunk/arch/blackfin/mach-bf533/boards/H8606.c index 43f43a095a99..4adceb0bdb6d 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/H8606.c +++ b/trunk/arch/blackfin/mach-bf533/boards/H8606.c @@ -166,7 +166,6 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { - .ctl_reg = 0x1000, .enable_dma = 1, /* use dma transfer with this chip*/ .bits_per_word = 16, }; @@ -174,7 +173,6 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .ctl_reg = 0x1000, .enable_dma = 0, .bits_per_word = 16, }; @@ -258,12 +256,6 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-fb", -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { diff --git a/trunk/arch/blackfin/mach-bf533/boards/ip0x.c b/trunk/arch/blackfin/mach-bf533/boards/ip0x.c index 644be5e5ab6f..8ec42ba35b9e 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/trunk/arch/blackfin/mach-bf533/boards/ip0x.c @@ -20,6 +20,7 @@ #endif #include #include +#include /* * Name the Board for the /proc/cpuinfo @@ -107,20 +108,6 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { -/* - * CPOL (Clock Polarity) - * 0 - Active high SCK - * 1 - Active low SCK - * CPHA (Clock Phase) Selects transfer format and operation mode - * 0 - SCLK toggles from middle of the first data bit, slave select - * pins controlled by hardware. - * 1 - SCLK toggles from beginning of first data bit, slave select - * pins controller by user software. - * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work - * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0 - * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1 - */ - .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ .enable_dma = 0, /* if 1 - block!!! */ .bits_per_word = 8, }; diff --git a/trunk/arch/blackfin/mach-bf533/boards/stamp.c b/trunk/arch/blackfin/mach-bf533/boards/stamp.c index 82f70efd66e7..6d68dcfa2da2 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/stamp.c +++ b/trunk/arch/blackfin/mach-bf533/boards/stamp.c @@ -321,12 +321,6 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-fb", -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { diff --git a/trunk/arch/blackfin/mach-bf533/include/mach/defBF532.h b/trunk/arch/blackfin/mach-bf533/include/mach/defBF532.h index 02b328eb0e07..e9ff491c0953 100644 --- a/trunk/arch/blackfin/mach-bf533/include/mach/defBF532.h +++ b/trunk/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -370,72 +370,6 @@ /* System MMR Register Bits */ /******************************************************************************* */ -/* ********************* PLL AND RESET MASKS ************************ */ - -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x0008 /* Core clock off */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ -#if !defined(__ADSPBF538__) -/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ -# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#endif -#define BYPASS 0x0100 /* Bypass the PLL */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ - -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 #define CHIPID_FAMILY 0x0FFFF000 @@ -703,54 +637,7 @@ /* ********** DMA CONTROLLER MASKS *********************8 */ -/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x00000001 /* Channel Enable */ -#define WNR 0x00000002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ -#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ -#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ -#define DMA2D 0x00000010 /* 2D/1D* Mode */ -#define RESTART 0x00000020 /* Restart */ -#define DI_SEL 0x00000040 /* Data Interrupt Select */ -#define DI_EN 0x00000080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x00000900 /* Next Descriptor Size */ -#define DMAFLOW 0x00007000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ - -/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ - -#define DMA_DONE 0x00000001 /* DMA Done Indicator */ -#define DMA_ERR 0x00000002 /* DMA Error Indicator */ -#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x00000008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ - -/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ #define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ diff --git a/trunk/arch/blackfin/mach-bf537/boards/pnav10.c b/trunk/arch/blackfin/mach-bf537/boards/pnav10.c index 9ba290466b56..4e0afda472ab 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/trunk/arch/blackfin/mach-bf537/boards/pnav10.c @@ -13,9 +13,6 @@ #include #include #include -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include -#endif #include #include #include @@ -147,45 +144,6 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -492,10 +450,6 @@ static struct platform_device *stamp_devices[] __initdata = { &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif diff --git a/trunk/arch/blackfin/mach-bf537/boards/stamp.c b/trunk/arch/blackfin/mach-bf537/boards/stamp.c index c46baa5e6d9b..ac9b52e0087c 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/stamp.c +++ b/trunk/arch/blackfin/mach-bf537/boards/stamp.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -25,6 +26,8 @@ #include #include #include +#include +#include #include #include #include @@ -65,7 +68,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -76,7 +79,6 @@ static struct platform_device bfin_isp1760_device = { #endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -#include #include static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -195,28 +197,6 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) -static struct resource ax88180_resources[] = { - [0] = { - .start = 0x20300000, - .end = 0x20300000 + 0x8000, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL), - }, -}; - -static struct platform_device ax88180_device = { - .name = "ax88180", - .id = -1, - .num_resources = ARRAY_SIZE(ax88180_resources), - .resource = ax88180_resources, -}; -#endif - #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { @@ -272,8 +252,8 @@ static struct resource isp1362_hcd_resources[] = { .end = 0x20360004, .flags = IORESOURCE_MEM, }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .start = IRQ_PF3, + .end = IRQ_PF3, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -300,6 +280,44 @@ static struct platform_device isp1362_hcd_device = { }; #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN_RX, + .end = IRQ_CAN_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_TX, + .end = IRQ_CAN_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_ERROR, + .end = IRQ_CAN_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -514,15 +532,14 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = { }; #endif -#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) -#include +#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) #include static struct bfin5xx_spi_chip ad7147_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, }; -static struct ad714x_slider_plat slider_plat[] = { +static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { { .start_stage = 0, .end_stage = 7, @@ -530,7 +547,7 @@ static struct ad714x_slider_plat slider_plat[] = { }, }; -static struct ad714x_button_plat button_plat[] = { +static struct ad714x_button_plat ad7147_spi_button_plat[] = { { .keycode = BTN_FORWARD, .l_mask = 0, @@ -557,11 +574,11 @@ static struct ad714x_button_plat button_plat[] = { .h_mask = 0x400, }, }; -static struct ad714x_platform_data ad7147_platfrom_data = { +static struct ad714x_platform_data ad7147_spi_platform_data = { .slider_num = 1, .button_num = 5, - .slider = slider_plat, - .button = button_plat, + .slider = ad7147_spi_slider_plat, + .button = ad7147_spi_button_plat, .stage_cfg_reg = { {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600}, {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650}, @@ -580,10 +597,9 @@ static struct ad714x_platform_data ad7147_platfrom_data = { }; #endif -#if defined(CONFIG_INPUT_EVAL_AD7142EB) -#include +#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) #include -static struct ad714x_button_plat button_plat[] = { +static struct ad714x_button_plat ad7142_i2c_button_plat[] = { { .keycode = BTN_1, .l_mask = 0, @@ -605,9 +621,9 @@ static struct ad714x_button_plat button_plat[] = { .h_mask = 0x8, }, }; -static struct ad714x_platform_data ad7142_platfrom_data = { +static struct ad714x_platform_data ad7142_i2c_platform_data = { .button_num = 4, - .button = button_plat, + .button = ad7142_i2c_button_plat, .stage_cfg_reg = { /* fixme: figure out right setting for all comoponent according * to hardware feature of EVAL-AD7142EB board */ @@ -696,8 +712,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { #endif #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) -#include -#include +#include static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, .y_axis_offset = 0, @@ -721,9 +736,7 @@ static const struct adxl34x_platform_data adxl34x_info = { .ev_code_y = ABS_Y, /* EV_REL */ .ev_code_z = ABS_Z, /* EV_REL */ - .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ /* .ev_code_ff = KEY_F,*/ /* EV_KEY */ /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ @@ -761,6 +774,47 @@ static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { }; #endif +#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +static struct bfin5xx_spi_chip adf7021_spi_chip_info = { + .bits_per_word = 16, + .cs_gpio = GPIO_PF10, +}; + +#include +#define TXREG 0x0160A470 +static const u32 adf7021_regs[] = { + 0x09608FA0, + 0x00575011, + 0x00A7F092, + 0x2B141563, + 0x81F29E94, + 0x00003155, + 0x050A4F66, + 0x00000007, + 0x00000008, + 0x000231E9, + 0x3296354A, + 0x891A2B3B, + 0x00000D9C, + 0x0000000D, + 0x0000000E, + 0x0000000F, +}; + +static struct adf702x_platform_data adf7021_platform_data = { + .regs_base = (void *)SPORT1_TCR1, + .dma_ch_rx = CH_SPORT1_RX, + .dma_ch_tx = CH_SPORT1_TX, + .irq_sport_err = IRQ_SPORT1_ERROR, + .gpio_int_rfs = GPIO_PF8, + .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI, + P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0}, + .adf702x_model = MODEL_ADF7021, + .adf702x_regs = adf7021_regs, + .tx_reg = TXREG, +}; +#endif + #if defined(CONFIG_MTD_DATAFLASH) \ || defined(CONFIG_MTD_DATAFLASH_MODULE) @@ -794,6 +848,13 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif +#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -855,7 +916,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) +#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) { .modalias = "ad714x_captouch", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -863,7 +924,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 5, .mode = SPI_MODE_3, - .platform_data = &ad7147_platfrom_data, + .platform_data = &ad7147_spi_platform_data, .controller_data = &ad7147_spi_chip_info, }, #endif @@ -932,6 +993,30 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif +#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) + { + .modalias = "adxl34x", + .platform_data = &adxl34x_info, + .irq = IRQ_PF6, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_adxl34x_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) + { + .modalias = "adf702x", + .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, /* GPIO controlled SSEL */ + .controller_data = &adf7021_spi_chip_info, + .platform_data = &adf7021_platform_data, + .mode = SPI_MODE_0, + }, +#endif + }; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -1175,7 +1260,6 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) -#include #include static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { [0] = KEY_GRAVE, @@ -1268,35 +1352,33 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { * ADP5520/5501 Backlight Data */ -static struct adp5520_backlight_platfrom_data adp5520_backlight_data = { - .fade_in = FADE_T_1200ms, - .fade_out = FADE_T_1200ms, - .fade_led_law = BL_LAW_LINEAR, - .en_ambl_sens = 1, - .abml_filt = BL_AMBL_FILT_640ms, - .l1_daylight_max = BL_CUR_mA(15), - .l1_daylight_dim = BL_CUR_mA(0), - .l2_office_max = BL_CUR_mA(7), - .l2_office_dim = BL_CUR_mA(0), - .l3_dark_max = BL_CUR_mA(3), - .l3_dark_dim = BL_CUR_mA(0), - .l2_trip = L2_COMP_CURR_uA(700), - .l2_hyst = L2_COMP_CURR_uA(50), - .l3_trip = L3_COMP_CURR_uA(80), - .l3_hyst = L3_COMP_CURR_uA(20), +static struct adp5520_backlight_platform_data adp5520_backlight_data = { + .fade_in = ADP5520_FADE_T_1200ms, + .fade_out = ADP5520_FADE_T_1200ms, + .fade_led_law = ADP5520_BL_LAW_LINEAR, + .en_ambl_sens = 1, + .abml_filt = ADP5520_BL_AMBL_FILT_640ms, + .l1_daylight_max = ADP5520_BL_CUR_mA(15), + .l1_daylight_dim = ADP5520_BL_CUR_mA(0), + .l2_office_max = ADP5520_BL_CUR_mA(7), + .l2_office_dim = ADP5520_BL_CUR_mA(0), + .l3_dark_max = ADP5520_BL_CUR_mA(3), + .l3_dark_dim = ADP5520_BL_CUR_mA(0), + .l2_trip = ADP5520_L2_COMP_CURR_uA(700), + .l2_hyst = ADP5520_L2_COMP_CURR_uA(50), + .l3_trip = ADP5520_L3_COMP_CURR_uA(80), + .l3_hyst = ADP5520_L3_COMP_CURR_uA(20), }; /* * ADP5520/5501 LEDs Data */ -#include - static struct led_info adp5520_leds[] = { { .name = "adp5520-led1", .default_trigger = "none", - .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms, + .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms, }, #ifdef ADP5520_EN_ALL_LEDS { @@ -1312,51 +1394,50 @@ static struct led_info adp5520_leds[] = { #endif }; -static struct adp5520_leds_platfrom_data adp5520_leds_data = { +static struct adp5520_leds_platform_data adp5520_leds_data = { .num_leds = ARRAY_SIZE(adp5520_leds), .leds = adp5520_leds, - .fade_in = FADE_T_600ms, - .fade_out = FADE_T_600ms, - .led_on_time = LED_ONT_600ms, + .fade_in = ADP5520_FADE_T_600ms, + .fade_out = ADP5520_FADE_T_600ms, + .led_on_time = ADP5520_LED_ONT_600ms, }; /* * ADP5520 GPIO Data */ -static struct adp5520_gpio_platfrom_data adp5520_gpio_data = { +static struct adp5520_gpio_platform_data adp5520_gpio_data = { .gpio_start = 50, - .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2, - .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2, + .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, + .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, }; /* * ADP5520 Keypad Data */ -#include static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = { - [KEY(0, 0)] = KEY_GRAVE, - [KEY(0, 1)] = KEY_1, - [KEY(0, 2)] = KEY_2, - [KEY(0, 3)] = KEY_3, - [KEY(1, 0)] = KEY_4, - [KEY(1, 1)] = KEY_5, - [KEY(1, 2)] = KEY_6, - [KEY(1, 3)] = KEY_7, - [KEY(2, 0)] = KEY_8, - [KEY(2, 1)] = KEY_9, - [KEY(2, 2)] = KEY_0, - [KEY(2, 3)] = KEY_MINUS, - [KEY(3, 0)] = KEY_EQUAL, - [KEY(3, 1)] = KEY_BACKSLASH, - [KEY(3, 2)] = KEY_BACKSPACE, - [KEY(3, 3)] = KEY_ENTER, -}; - -static struct adp5520_keys_platfrom_data adp5520_keys_data = { - .rows_en_mask = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0, - .cols_en_mask = COL_C3 | COL_C2 | COL_C1 | COL_C0, + [ADP5520_KEY(0, 0)] = KEY_GRAVE, + [ADP5520_KEY(0, 1)] = KEY_1, + [ADP5520_KEY(0, 2)] = KEY_2, + [ADP5520_KEY(0, 3)] = KEY_3, + [ADP5520_KEY(1, 0)] = KEY_4, + [ADP5520_KEY(1, 1)] = KEY_5, + [ADP5520_KEY(1, 2)] = KEY_6, + [ADP5520_KEY(1, 3)] = KEY_7, + [ADP5520_KEY(2, 0)] = KEY_8, + [ADP5520_KEY(2, 1)] = KEY_9, + [ADP5520_KEY(2, 2)] = KEY_0, + [ADP5520_KEY(2, 3)] = KEY_MINUS, + [ADP5520_KEY(3, 0)] = KEY_EQUAL, + [ADP5520_KEY(3, 1)] = KEY_BACKSLASH, + [ADP5520_KEY(3, 2)] = KEY_BACKSPACE, + [ADP5520_KEY(3, 3)] = KEY_ENTER, +}; + +static struct adp5520_keys_platform_data adp5520_keys_data = { + .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0, + .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0, .keymap = adp5520_keymap, .keymapsize = ARRAY_SIZE(adp5520_keymap), .repeat = 0, @@ -1366,50 +1447,81 @@ static struct adp5520_keys_platfrom_data adp5520_keys_data = { * ADP5520/5501 Multifuction Device Init Data */ -static struct adp5520_subdev_info adp5520_subdevs[] = { - { - .name = "adp5520-backlight", - .id = ID_ADP5520, - .platform_data = &adp5520_backlight_data, - }, - { - .name = "adp5520-led", - .id = ID_ADP5520, - .platform_data = &adp5520_leds_data, - }, - { - .name = "adp5520-gpio", - .id = ID_ADP5520, - .platform_data = &adp5520_gpio_data, - }, - { - .name = "adp5520-keys", - .id = ID_ADP5520, - .platform_data = &adp5520_keys_data, - }, -}; - static struct adp5520_platform_data adp5520_pdev_data = { - .num_subdevs = ARRAY_SIZE(adp5520_subdevs), - .subdevs = adp5520_subdevs, + .backlight = &adp5520_backlight_data, + .leds = &adp5520_leds_data, + .gpio = &adp5520_gpio_data, + .keys = &adp5520_keys_data, }; #endif #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) #include -static struct adp5588_gpio_platfrom_data adp5588_gpio_data = { +static struct adp5588_gpio_platform_data adp5588_gpio_data = { .gpio_start = 50, .pullup_dis_mask = 0, }; #endif +#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#include +static struct led_info adp8870_leds[] = { + { + .name = "adp8870-led7", + .default_trigger = "none", + .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms, + }, +}; + + +static struct adp8870_backlight_platform_data adp8870_pdata = { + .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 | + ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */ + .pwm_assign = 0, /* 1 = Enables PWM mode */ + + .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */ + .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */ + .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ + + .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ + .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */ + + .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + .leds = adp8870_leds, + .num_leds = ARRAY_SIZE(adp8870_leds), + .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ + .led_fade_in = ADP8870_FADE_T_600ms, + .led_fade_out = ADP8870_FADE_T_600ms, + .led_on_time = ADP8870_LED_ONT_200ms, +}; +#endif + static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_INPUT_EVAL_AD7142EB) +#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) { I2C_BOARD_INFO("ad7142_captouch", 0x2C), .irq = IRQ_PG5, - .platform_data = (void *)&ad7142_platfrom_data, + .platform_data = (void *)&ad7142_i2c_platform_data, }, #endif #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) @@ -1462,6 +1574,32 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) + { + I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2C), + }, +#endif +#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) + { + I2C_BOARD_INFO("adp8870", 0x2B), + .platform_data = (void *)&adp8870_pdata, + }, +#endif +#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE) + { + I2C_BOARD_INFO("adau1371", 0x1A), + }, +#endif +#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) + { + I2C_BOARD_INFO("adau1761", 0x38), + }, +#endif +#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) + { + I2C_BOARD_INFO("ad5258", 0x18), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -1602,8 +1740,8 @@ static struct platform_device *stamp_devices[] __initdata = { &dm9000_device, #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) - &ax88180_device, +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can_device, #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) diff --git a/trunk/arch/blackfin/mach-bf537/include/mach/bf537.h b/trunk/arch/blackfin/mach-bf537/include/mach/bf537.h index 17fab4474669..8b291418ca32 100644 --- a/trunk/arch/blackfin/mach-bf537/include/mach/bf537.h +++ b/trunk/arch/blackfin/mach-bf537/include/mach/bf537.h @@ -9,16 +9,6 @@ #ifndef __MACH_BF537_H__ #define __MACH_BF537_H__ -/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */ - -#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */ -#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */ -#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ -#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ -#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */ -#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */ -#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ - #define OFFSET_(x) ((x) & 0x0000FFFF) /*some misc defines*/ diff --git a/trunk/arch/blackfin/mach-bf537/include/mach/blackfin.h b/trunk/arch/blackfin/mach-bf537/include/mach/blackfin.h index eab006d260c5..a12d4b6a221d 100644 --- a/trunk/arch/blackfin/mach-bf537/include/mach/blackfin.h +++ b/trunk/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -40,10 +40,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/trunk/arch/blackfin/mach-bf537/include/mach/defBF534.h b/trunk/arch/blackfin/mach-bf537/include/mach/defBF534.h index a6d20ca57683..066d5c261f47 100644 --- a/trunk/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/trunk/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -958,67 +958,6 @@ ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ -/* -** ********************* PLL AND RESET MASKS ****************************************/ -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ -#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ -#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ -#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ -#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 @@ -1645,34 +1584,6 @@ #define BGSTAT 0x0020 /* Bus Grant Status */ /* ************************** DMA CONTROLLER MASKS ********************************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define RESTART 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ - -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ @@ -1690,12 +1601,6 @@ #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ - /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ /* PPI_CONTROL Masks */ #define PORT_EN 0x0001 /* PPI Port Enable */ diff --git a/trunk/arch/blackfin/mach-bf538/Makefile b/trunk/arch/blackfin/mach-bf538/Makefile index 8cd2719684db..c0be54f2cd2b 100644 --- a/trunk/arch/blackfin/mach-bf538/Makefile +++ b/trunk/arch/blackfin/mach-bf538/Makefile @@ -3,3 +3,4 @@ # obj-y := ints-priority.o dma.o +obj-$(CONFIG_GPIOLIB) += ext-gpio.o diff --git a/trunk/arch/blackfin/mach-bf538/boards/ezkit.c b/trunk/arch/blackfin/mach-bf538/boards/ezkit.c index 14af5c2088d4..c296bb1ed503 100644 --- a/trunk/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/trunk/arch/blackfin/mach-bf538/boards/ezkit.c @@ -151,6 +151,44 @@ static struct platform_device bfin_sir2_device = { #endif #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN_RX, + .end = IRQ_CAN_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_TX, + .end = IRQ_CAN_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_ERROR, + .end = IRQ_CAN_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. @@ -610,6 +648,10 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can_device, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif diff --git a/trunk/arch/blackfin/mach-bf538/ext-gpio.c b/trunk/arch/blackfin/mach-bf538/ext-gpio.c new file mode 100644 index 000000000000..180b1252679f --- /dev/null +++ b/trunk/arch/blackfin/mach-bf538/ext-gpio.c @@ -0,0 +1,123 @@ +/* + * GPIOLIB interface for BF538/9 PORT C, D, and E GPIOs + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include + +#define DEFINE_REG(reg, off) \ +static inline u16 read_##reg(void __iomem *port) \ + { return bfin_read16(port + off); } \ +static inline void write_##reg(void __iomem *port, u16 v) \ + { bfin_write16(port + off, v); } + +DEFINE_REG(PORTIO, 0x00) +DEFINE_REG(PORTIO_CLEAR, 0x10) +DEFINE_REG(PORTIO_SET, 0x20) +DEFINE_REG(PORTIO_DIR, 0x40) +DEFINE_REG(PORTIO_INEN, 0x50) + +static void __iomem *gpio_chip_to_mmr(struct gpio_chip *chip) +{ + switch (chip->base) { + default: /* not really needed, but keeps gcc happy */ + case GPIO_PC0: return (void __iomem *)PORTCIO; + case GPIO_PD0: return (void __iomem *)PORTDIO; + case GPIO_PE0: return (void __iomem *)PORTEIO; + } +} + +static int bf538_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + return !!(read_PORTIO(port) & (1u << gpio)); +} + +static void bf538_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + if (value) + write_PORTIO_SET(port, (1u << gpio)); + else + write_PORTIO_CLEAR(port, (1u << gpio)); +} + +static int bf538_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + write_PORTIO_DIR(port, read_PORTIO_DIR(port) & ~(1u << gpio)); + write_PORTIO_INEN(port, read_PORTIO_INEN(port) | (1u << gpio)); + return 0; +} + +static int bf538_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + write_PORTIO_INEN(port, read_PORTIO_INEN(port) & ~(1u << gpio)); + bf538_gpio_set_value(port, gpio, value); + write_PORTIO_DIR(port, read_PORTIO_DIR(port) | (1u << gpio)); + return 0; +} + +static int bf538_gpio_request(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_special_gpio_request(chip->base + gpio, chip->label); +} + +static void bf538_gpio_free(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_special_gpio_free(chip->base + gpio); +} + +/* We don't set the irq fields as these banks cannot generate interrupts */ + +static struct gpio_chip bf538_portc_chip = { + .label = "GPIO-PC", + .direction_input = bf538_gpio_direction_input, + .get = bf538_gpio_get_value, + .direction_output = bf538_gpio_direction_output, + .set = bf538_gpio_set_value, + .request = bf538_gpio_request, + .free = bf538_gpio_free, + .base = GPIO_PC0, + .ngpio = GPIO_PC9 - GPIO_PC0 + 1, +}; + +static struct gpio_chip bf538_portd_chip = { + .label = "GPIO-PD", + .direction_input = bf538_gpio_direction_input, + .get = bf538_gpio_get_value, + .direction_output = bf538_gpio_direction_output, + .set = bf538_gpio_set_value, + .request = bf538_gpio_request, + .free = bf538_gpio_free, + .base = GPIO_PD0, + .ngpio = GPIO_PD13 - GPIO_PD0 + 1, +}; + +static struct gpio_chip bf538_porte_chip = { + .label = "GPIO-PE", + .direction_input = bf538_gpio_direction_input, + .get = bf538_gpio_get_value, + .direction_output = bf538_gpio_direction_output, + .set = bf538_gpio_set_value, + .request = bf538_gpio_request, + .free = bf538_gpio_free, + .base = GPIO_PE0, + .ngpio = GPIO_PE15 - GPIO_PE0 + 1, +}; + +static int __init bf538_extgpio_setup(void) +{ + return gpiochip_add(&bf538_portc_chip) | + gpiochip_add(&bf538_portd_chip) | + gpiochip_add(&bf538_porte_chip); +} +arch_initcall(bf538_extgpio_setup); diff --git a/trunk/arch/blackfin/mach-bf538/include/mach/blackfin.h b/trunk/arch/blackfin/mach-bf538/include/mach/blackfin.h index 278e8942eef2..08b5eabb1ed5 100644 --- a/trunk/arch/blackfin/mach-bf538/include/mach/blackfin.h +++ b/trunk/arch/blackfin/mach-bf538/include/mach/blackfin.h @@ -37,10 +37,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/trunk/arch/blackfin/mach-bf538/include/mach/defBF539.h b/trunk/arch/blackfin/mach-bf538/include/mach/defBF539.h index 5f6c34dfd08e..fac563e6f62f 100644 --- a/trunk/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/trunk/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -468,31 +468,31 @@ /* General-Purpose Ports (0xFFC01500 - 0xFFC015FF) */ /* GPIO Port C Register Names */ -#define GPIO_C_CNFG 0xFFC01500 /* GPIO Pin Port C Configuration Register */ -#define GPIO_C_D 0xFFC01510 /* GPIO Pin Port C Data Register */ -#define GPIO_C_C 0xFFC01520 /* Clear GPIO Pin Port C Register */ -#define GPIO_C_S 0xFFC01530 /* Set GPIO Pin Port C Register */ -#define GPIO_C_T 0xFFC01540 /* Toggle GPIO Pin Port C Register */ -#define GPIO_C_DIR 0xFFC01550 /* GPIO Pin Port C Direction Register */ -#define GPIO_C_INEN 0xFFC01560 /* GPIO Pin Port C Input Enable Register */ +#define PORTCIO_FER 0xFFC01500 /* GPIO Pin Port C Configuration Register */ +#define PORTCIO 0xFFC01510 /* GPIO Pin Port C Data Register */ +#define PORTCIO_CLEAR 0xFFC01520 /* Clear GPIO Pin Port C Register */ +#define PORTCIO_SET 0xFFC01530 /* Set GPIO Pin Port C Register */ +#define PORTCIO_TOGGLE 0xFFC01540 /* Toggle GPIO Pin Port C Register */ +#define PORTCIO_DIR 0xFFC01550 /* GPIO Pin Port C Direction Register */ +#define PORTCIO_INEN 0xFFC01560 /* GPIO Pin Port C Input Enable Register */ /* GPIO Port D Register Names */ -#define GPIO_D_CNFG 0xFFC01504 /* GPIO Pin Port D Configuration Register */ -#define GPIO_D_D 0xFFC01514 /* GPIO Pin Port D Data Register */ -#define GPIO_D_C 0xFFC01524 /* Clear GPIO Pin Port D Register */ -#define GPIO_D_S 0xFFC01534 /* Set GPIO Pin Port D Register */ -#define GPIO_D_T 0xFFC01544 /* Toggle GPIO Pin Port D Register */ -#define GPIO_D_DIR 0xFFC01554 /* GPIO Pin Port D Direction Register */ -#define GPIO_D_INEN 0xFFC01564 /* GPIO Pin Port D Input Enable Register */ +#define PORTDIO_FER 0xFFC01504 /* GPIO Pin Port D Configuration Register */ +#define PORTDIO 0xFFC01514 /* GPIO Pin Port D Data Register */ +#define PORTDIO_CLEAR 0xFFC01524 /* Clear GPIO Pin Port D Register */ +#define PORTDIO_SET 0xFFC01534 /* Set GPIO Pin Port D Register */ +#define PORTDIO_TOGGLE 0xFFC01544 /* Toggle GPIO Pin Port D Register */ +#define PORTDIO_DIR 0xFFC01554 /* GPIO Pin Port D Direction Register */ +#define PORTDIO_INEN 0xFFC01564 /* GPIO Pin Port D Input Enable Register */ /* GPIO Port E Register Names */ -#define GPIO_E_CNFG 0xFFC01508 /* GPIO Pin Port E Configuration Register */ -#define GPIO_E_D 0xFFC01518 /* GPIO Pin Port E Data Register */ -#define GPIO_E_C 0xFFC01528 /* Clear GPIO Pin Port E Register */ -#define GPIO_E_S 0xFFC01538 /* Set GPIO Pin Port E Register */ -#define GPIO_E_T 0xFFC01548 /* Toggle GPIO Pin Port E Register */ -#define GPIO_E_DIR 0xFFC01558 /* GPIO Pin Port E Direction Register */ -#define GPIO_E_INEN 0xFFC01568 /* GPIO Pin Port E Input Enable Register */ +#define PORTEIO_FER 0xFFC01508 /* GPIO Pin Port E Configuration Register */ +#define PORTEIO 0xFFC01518 /* GPIO Pin Port E Data Register */ +#define PORTEIO_CLEAR 0xFFC01528 /* Clear GPIO Pin Port E Register */ +#define PORTEIO_SET 0xFFC01538 /* Set GPIO Pin Port E Register */ +#define PORTEIO_TOGGLE 0xFFC01548 /* Toggle GPIO Pin Port E Register */ +#define PORTEIO_DIR 0xFFC01558 /* GPIO Pin Port E Direction Register */ +#define PORTEIO_INEN 0xFFC01568 /* GPIO Pin Port E Input Enable Register */ /* DMA Controller 1 Traffic Control Registers (0xFFC01B00 - 0xFFC01BFF) */ @@ -1422,81 +1422,6 @@ /* System MMR Register Bits and Macros */ /******************************************************************************* */ -/* ********************* PLL AND RESET MASKS ************************ */ -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* Shut off PLL clocks */ - -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ -#define IN_DELAY 0x0014 /* EBIU Input Delay Select */ -#define OUT_DELAY 0x00C0 /* EBIU Output Delay Select */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ - -/* PLL_CTL Macros */ -#ifdef _MISRA_RULES -#define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ -#define SET_OUT_DELAY(x) (((x)&0x03u) << 0x6) -#define SET_IN_DELAY(x) ((((x)&0x02u) << 0x3) | (((x)&0x01u) << 0x2)) -#else -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ -#define SET_OUT_DELAY(x) (((x)&0x03) << 0x6) -#define SET_IN_DELAY(x) ((((x)&0x02) << 0x3) | (((x)&0x01) << 0x2)) -#endif /* _MISRA_RULES */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ - -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -/* PLL_DIV Macros */ -#ifdef _MISRA_RULES -#define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -#else -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -#endif /* _MISRA_RULES */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level - Only Program Values Within Specifications */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ -#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - /* SWRST Mask */ #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ @@ -1609,91 +1534,6 @@ #endif /* _MISRA_RULES */ -/* ********* WATCHDOG TIMER MASKS ******************** */ -/* Watchdog Timer WDOG_CTL Register Masks */ -#ifdef _MISRA_RULES -#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */ -#else -#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ -#endif /* _MISRA_RULES */ -#define WDEV_RESET 0x0000 /* generate reset event on roll over */ -#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ -#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ -#define WDEV_NONE 0x0006 /* no event on roll over */ -#define WDEN 0x0FF0 /* enable watchdog */ -#define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ - -/* deprecated WDOG_CTL Register Masks for legacy code */ -#define ICTL WDEV -#define ENABLE_RESET WDEV_RESET -#define WDOG_RESET WDEV_RESET -#define ENABLE_NMI WDEV_NMI -#define WDOG_NMI WDEV_NMI -#define ENABLE_GPI WDEV_GPI -#define WDOG_GPI WDEV_GPI -#define DISABLE_EVT WDEV_NONE -#define WDOG_NONE WDEV_NONE - -#define TMR_EN WDEN -#define WDOG_DISABLE WDDIS -#define TRO WDRO - -#define ICTL_P0 0x01 -#define ICTL_P1 0x02 -#define TRO_P 0x0F - - -/* *************** REAL TIME CLOCK MASKS **************************/ -/* RTC_STAT and RTC_ALARM register */ -#define RTSEC 0x0000003F /* Real-Time Clock Seconds */ -#define RTMIN 0x00000FC0 /* Real-Time Clock Minutes */ -#define RTHR 0x0001F000 /* Real-Time Clock Hours */ -#define RTDAY 0xFFFE0000 /* Real-Time Clock Days */ - -/* RTC_ICTL register */ -#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ -#define AIE 0x0002 /* Alarm Interrupt Enable */ -#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MIE 0x0008 /* Minutes Interrupt Enable */ -#define HIE 0x0010 /* Hours Interrupt Enable */ -#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WCIE 0x8000 /* Write Complete Interrupt Enable */ - -/* RTC_ISTAT register */ -#define SWEF 0x0001 /* Stopwatch Event Flag */ -#define AEF 0x0002 /* Alarm Event Flag */ -#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ -#define MEF 0x0008 /* Minutes Event Flag */ -#define HEF 0x0010 /* Hours Event Flag */ -#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ -#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ -#define WPS 0x4000 /* Write Pending Status (RO) */ -#define WCOM 0x8000 /* Write Complete */ - -/* RTC_FAST Mask (RTC_PREN Mask) */ -#define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */ -#define PREN 0x00000001 - /* ** Must be set after power-up for proper operation of RTC */ - -/* Deprecated RTC_STAT and RTC_ALARM Masks */ -#define RTC_SEC RTSEC /* Real-Time Clock Seconds */ -#define RTC_MIN RTMIN /* Real-Time Clock Minutes */ -#define RTC_HR RTHR /* Real-Time Clock Hours */ -#define RTC_DAY RTDAY /* Real-Time Clock Days */ - -/* Deprecated RTC_ICTL/RTC_ISTAT Masks */ -#define STOPWATCH SWIE /* Stopwatch Interrupt Enable */ -#define ALARM AIE /* Alarm Interrupt Enable */ -#define SECOND SIE /* Seconds (1 Hz) Interrupt Enable */ -#define MINUTE MIE /* Minutes Interrupt Enable */ -#define HOUR HIE /* Hours Interrupt Enable */ -#define DAY DIE /* 24 Hours (Days) Interrupt Enable */ -#define DAY_ALARM DAIE /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WRITE_COMPLETE WCIE /* Write Complete Interrupt Enable */ - - /* ***************************** UART CONTROLLER MASKS ********************** */ /* UARTx_LCR Register */ #ifdef _MISRA_RULES @@ -1917,52 +1757,6 @@ /* ********** DMA CONTROLLER MASKS ***********************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Word Size 8 bits */ -#define WDSIZE_16 0x0004 /* Word Size 16 bits */ -#define WDSIZE_32 0x0008 /* Word Size 32 bits */ -#define DMA2D 0x0010 /* 2D/1D* Mode */ -#define RESTART 0x0020 /* Restart */ -#define DI_SEL 0x0040 /* Data Interrupt Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ - -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0x0 /* Channel Enable */ -#define WNR_P 0x1 /* Channel Direction (W/R*) */ -#define DMA2D_P 0x4 /* 2D/1D* Mode */ -#define RESTART_P 0x5 /* Restart */ -#define DI_SEL_P 0x6 /* Data Interrupt Select */ -#define DI_EN_P 0x7 /* Data Interrupt Enable */ - -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Done Indicator */ -#define DMA_ERR 0x0002 /* DMA Error Indicator */ -#define DFETCH 0x0004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0x0 /* DMA Done Indicator */ -#define DMA_ERR_P 0x1 /* DMA Error Indicator */ -#define DFETCH_P 0x2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 0x3 /* DMA Running Indicator */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ @@ -2625,1019 +2419,6 @@ #define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ -/********************************* MXVR MASKS ****************************************/ - -/* MXVR_CONFIG Masks */ - -#define MXVREN 0x00000001lu -#define MMSM 0x00000002lu -#define ACTIVE 0x00000004lu -#define SDELAY 0x00000008lu -#define NCMRXEN 0x00000010lu -#define RWRRXEN 0x00000020lu -#define MTXEN 0x00000040lu -#define MTXON 0x00000080lu /*legacy*/ -#define MTXONB 0x00000080lu -#define EPARITY 0x00000100lu -#define MSB 0x00001E00lu -#define APRXEN 0x00002000lu -#define WAKEUP 0x00004000lu -#define LMECH 0x00008000lu - -#ifdef _MISRA_RULES -#define SET_MSB(x) (((x)&0xFu) << 0x9) -#else -#define SET_MSB(x) (((x)&0xF) << 0x9) -#endif /* _MISRA_RULES */ - - -/* MXVR_PLL_CTL_0 Masks */ - -#define MXTALCEN 0x00000001lu -#define MXTALFEN 0x00000002lu -#define MPLLMS 0x00000008lu -#define MXTALMUL 0x00000030lu -#define MPLLEN 0x00000040lu -#define MPLLEN0 0x00000040lu /* legacy */ -#define MPLLEN1 0x00000080lu /* legacy */ -#define MMCLKEN 0x00000100lu -#define MMCLKMUL 0x00001E00lu -#define MPLLRSTB 0x00002000lu -#define MPLLRSTB0 0x00002000lu /* legacy */ -#define MPLLRSTB1 0x00004000lu /* legacy */ -#define MBCLKEN 0x00010000lu -#define MBCLKDIV 0x001E0000lu -#define MPLLCDR 0x00200000lu -#define MPLLCDR0 0x00200000lu /* legacy */ -#define MPLLCDR1 0x00400000lu /* legacy */ -#define INVRX 0x00800000lu -#define MFSEN 0x01000000lu -#define MFSDIV 0x1E000000lu -#define MFSSEL 0x60000000lu -#define MFSSYNC 0x80000000lu - -#define MXTALMUL_256FS 0x00000000lu /* legacy */ -#define MXTALMUL_384FS 0x00000010lu /* legacy */ -#define MXTALMUL_512FS 0x00000020lu /* legacy */ -#define MXTALMUL_1024FS 0x00000030lu - -#define MMCLKMUL_1024FS 0x00000000lu -#define MMCLKMUL_512FS 0x00000200lu -#define MMCLKMUL_256FS 0x00000400lu -#define MMCLKMUL_128FS 0x00000600lu -#define MMCLKMUL_64FS 0x00000800lu -#define MMCLKMUL_32FS 0x00000A00lu -#define MMCLKMUL_16FS 0x00000C00lu -#define MMCLKMUL_8FS 0x00000E00lu -#define MMCLKMUL_4FS 0x00001000lu -#define MMCLKMUL_2FS 0x00001200lu -#define MMCLKMUL_1FS 0x00001400lu -#define MMCLKMUL_1536FS 0x00001A00lu -#define MMCLKMUL_768FS 0x00001C00lu -#define MMCLKMUL_384FS 0x00001E00lu - -#define MBCLKDIV_DIV2 0x00020000lu -#define MBCLKDIV_DIV4 0x00040000lu -#define MBCLKDIV_DIV8 0x00060000lu -#define MBCLKDIV_DIV16 0x00080000lu -#define MBCLKDIV_DIV32 0x000A0000lu -#define MBCLKDIV_DIV64 0x000C0000lu -#define MBCLKDIV_DIV128 0x000E0000lu -#define MBCLKDIV_DIV256 0x00100000lu -#define MBCLKDIV_DIV512 0x00120000lu -#define MBCLKDIV_DIV1024 0x00140000lu - -#define MFSDIV_DIV2 0x02000000lu -#define MFSDIV_DIV4 0x04000000lu -#define MFSDIV_DIV8 0x06000000lu -#define MFSDIV_DIV16 0x08000000lu -#define MFSDIV_DIV32 0x0A000000lu -#define MFSDIV_DIV64 0x0C000000lu -#define MFSDIV_DIV128 0x0E000000lu -#define MFSDIV_DIV256 0x10000000lu -#define MFSDIV_DIV512 0x12000000lu -#define MFSDIV_DIV1024 0x14000000lu - -#define MFSSEL_CLOCK 0x00000000lu -#define MFSSEL_PULSE_HI 0x20000000lu -#define MFSSEL_PULSE_LO 0x40000000lu - - -/* MXVR_PLL_CTL_1 Masks */ - -#define MSTO 0x00000001lu -#define MSTO0 0x00000001lu /* legacy */ -#define MHOGGD 0x00000004lu -#define MHOGGD0 0x00000004lu /* legacy */ -#define MHOGGD1 0x00000008lu /* legacy */ -#define MSHAPEREN 0x00000010lu -#define MSHAPEREN0 0x00000010lu /* legacy */ -#define MSHAPEREN1 0x00000020lu /* legacy */ -#define MPLLCNTEN 0x00008000lu -#define MPLLCNT 0xFFFF0000lu - -#ifdef _MISRA_RULES -#define SET_MPLLCNT(x) (((x)&0xFFFFu) << 0x10) -#else -#define SET_MPLLCNT(x) (((x)&0xFFFF) << 0x10) -#endif /* _MISRA_RULES */ - - -/* MXVR_PLL_CTL_2 Masks */ - -#define MSHAPERSEL 0x00000007lu -#define MCPSEL 0x000000E0lu - -/* MXVR_INT_STAT_0 Masks */ - -#define NI2A 0x00000001lu -#define NA2I 0x00000002lu -#define SBU2L 0x00000004lu -#define SBL2U 0x00000008lu -#define PRU 0x00000010lu -#define MPRU 0x00000020lu -#define DRU 0x00000040lu -#define MDRU 0x00000080lu -#define SBU 0x00000100lu -#define ATU 0x00000200lu -#define FCZ0 0x00000400lu -#define FCZ1 0x00000800lu -#define PERR 0x00001000lu -#define MH2L 0x00002000lu -#define ML2H 0x00004000lu -#define WUP 0x00008000lu -#define FU2L 0x00010000lu -#define FL2U 0x00020000lu -#define BU2L 0x00040000lu -#define BL2U 0x00080000lu -#define PCZ 0x00400000lu -#define FERR 0x00800000lu -#define CMR 0x01000000lu -#define CMROF 0x02000000lu -#define CMTS 0x04000000lu -#define CMTC 0x08000000lu -#define RWRC 0x10000000lu -#define BCZ 0x20000000lu -#define BMERR 0x40000000lu -#define DERR 0x80000000lu - - -/* MXVR_INT_EN_0 Masks */ - -#define NI2AEN NI2A -#define NA2IEN NA2I -#define SBU2LEN SBU2L -#define SBL2UEN SBL2U -#define PRUEN PRU -#define MPRUEN MPRU -#define DRUEN DRU -#define MDRUEN MDRU -#define SBUEN SBU -#define ATUEN ATU -#define FCZ0EN FCZ0 -#define FCZ1EN FCZ1 -#define PERREN PERR -#define MH2LEN MH2L -#define ML2HEN ML2H -#define WUPEN WUP -#define FU2LEN FU2L -#define FL2UEN FL2U -#define BU2LEN BU2L -#define BL2UEN BL2U -#define PCZEN PCZ -#define FERREN FERR -#define CMREN CMR -#define CMROFEN CMROF -#define CMTSEN CMTS -#define CMTCEN CMTC -#define RWRCEN RWRC -#define BCZEN BCZ -#define BMERREN BMERR -#define DERREN DERR - - -/* MXVR_INT_STAT_1 Masks */ - -#define APR 0x00000004lu -#define APROF 0x00000008lu -#define APTS 0x00000040lu -#define APTC 0x00000080lu -#define APRCE 0x00000400lu -#define APRPE 0x00000800lu - -#define HDONE0 0x00000001lu -#define DONE0 0x00000002lu -#define HDONE1 0x00000010lu -#define DONE1 0x00000020lu -#define HDONE2 0x00000100lu -#define DONE2 0x00000200lu -#define HDONE3 0x00001000lu -#define DONE3 0x00002000lu -#define HDONE4 0x00010000lu -#define DONE4 0x00020000lu -#define HDONE5 0x00100000lu -#define DONE5 0x00200000lu -#define HDONE6 0x01000000lu -#define DONE6 0x02000000lu -#define HDONE7 0x10000000lu -#define DONE7 0x20000000lu - -#define DONEX(x) (0x00000002 << (4 * (x))) -#define HDONEX(x) (0x00000001 << (4 * (x))) - - -/* MXVR_INT_EN_1 Masks */ - -#define APREN APR -#define APROFEN APROF -#define APTSEN APTS -#define APTCEN APTC -#define APRCEEN APRCE -#define APRPEEN APRPE - -#define HDONEEN0 HDONE0 -#define DONEEN0 DONE0 -#define HDONEEN1 HDONE1 -#define DONEEN1 DONE1 -#define HDONEEN2 HDONE2 -#define DONEEN2 DONE2 -#define HDONEEN3 HDONE3 -#define DONEEN3 DONE3 -#define HDONEEN4 HDONE4 -#define DONEEN4 DONE4 -#define HDONEEN5 HDONE5 -#define DONEEN5 DONE5 -#define HDONEEN6 HDONE6 -#define DONEEN6 DONE6 -#define HDONEEN7 HDONE7 -#define DONEEN7 DONE7 - -#define DONEENX(x) (0x00000002 << (4 * (x))) -#define HDONEENX(x) (0x00000001 << (4 * (x))) - - -/* MXVR_STATE_0 Masks */ - -#define NACT 0x00000001lu -#define SBLOCK 0x00000002lu -#define PFDLOCK 0x00000004lu -#define PFDLOCK0 0x00000004lu /* legacy */ -#define PDD 0x00000008lu -#define PDD0 0x00000008lu /* legacy */ -#define PVCO 0x00000010lu -#define PVCO0 0x00000010lu /* legacy */ -#define PFDLOCK1 0x00000020lu /* legacy */ -#define PDD1 0x00000040lu /* legacy */ -#define PVCO1 0x00000080lu /* legacy */ -#define APBSY 0x00000100lu -#define APARB 0x00000200lu -#define APTX 0x00000400lu -#define APRX 0x00000800lu -#define CMBSY 0x00001000lu -#define CMARB 0x00002000lu -#define CMTX 0x00004000lu -#define CMRX 0x00008000lu -#define MRXONB 0x00010000lu -#define RGSIP 0x00020000lu -#define DALIP 0x00040000lu -#define ALIP 0x00080000lu -#define RRDIP 0x00100000lu -#define RWRIP 0x00200000lu -#define FLOCK 0x00400000lu -#define BLOCK 0x00800000lu -#define RSB 0x0F000000lu -#define DERRNUM 0xF0000000lu - - -/* MXVR_STATE_1 Masks */ - -#define STXNUMB 0x0000000Flu -#define SRXNUMB 0x000000F0lu -#define APCONT 0x00000100lu -#define DMAACTIVEX 0x00FF0000lu -#define DMAACTIVE0 0x00010000lu -#define DMAACTIVE1 0x00020000lu -#define DMAACTIVE2 0x00040000lu -#define DMAACTIVE3 0x00080000lu -#define DMAACTIVE4 0x00100000lu -#define DMAACTIVE5 0x00200000lu -#define DMAACTIVE6 0x00400000lu -#define DMAACTIVE7 0x00800000lu -#define DMAPMENX 0xFF000000lu -#define DMAPMEN0 0x01000000lu -#define DMAPMEN1 0x02000000lu -#define DMAPMEN2 0x04000000lu -#define DMAPMEN3 0x08000000lu -#define DMAPMEN4 0x10000000lu -#define DMAPMEN5 0x20000000lu -#define DMAPMEN6 0x40000000lu -#define DMAPMEN7 0x80000000lu - - -/* MXVR_POSITION Masks */ - -#define PVALID 0x8000 -#define POSITION 0x003F - - -/* MXVR_MAX_POSITION Masks */ - -#define MPVALID 0x8000 -#define MPOSITION 0x003F - - -/* MXVR_DELAY Masks */ - -#define DVALID 0x8000 -#define DELAY 0x003F - - -/* MXVR_MAX_DELAY Masks */ - -#define MDVALID 0x8000 -#define MDELAY 0x003F - - -/* MXVR_LADDR Masks */ - -#define LVALID 0x80000000lu -#define LADDR 0x0000FFFFlu - - -/* MXVR_GADDR Masks */ - -#define GVALID 0x8000 -#define GADDRL 0x00FF - - -/* MXVR_AADDR Masks */ - -#define AVALID 0x80000000lu -#define AADDR 0x0000FFFFlu - - -/* MXVR_ALLOC_0 Masks */ - -#define CIU0 0x00000080lu -#define CIU1 0x00008000lu -#define CIU2 0x00800000lu -#define CIU3 0x80000000lu - -#define CL0 0x0000007Flu -#define CL1 0x00007F00lu -#define CL2 0x007F0000lu -#define CL3 0x7F000000lu - - -/* MXVR_ALLOC_1 Masks */ - -#define CIU4 0x00000080lu -#define CIU5 0x00008000lu -#define CIU6 0x00800000lu -#define CIU7 0x80000000lu - -#define CL4 0x0000007Flu -#define CL5 0x00007F00lu -#define CL6 0x007F0000lu -#define CL7 0x7F000000lu - - -/* MXVR_ALLOC_2 Masks */ - -#define CIU8 0x00000080lu -#define CIU9 0x00008000lu -#define CIU10 0x00800000lu -#define CIU11 0x80000000lu - -#define CL8 0x0000007Flu -#define CL9 0x00007F00lu -#define CL10 0x007F0000lu -#define CL11 0x7F000000lu - - -/* MXVR_ALLOC_3 Masks */ - -#define CIU12 0x00000080lu -#define CIU13 0x00008000lu -#define CIU14 0x00800000lu -#define CIU15 0x80000000lu - -#define CL12 0x0000007Flu -#define CL13 0x00007F00lu -#define CL14 0x007F0000lu -#define CL15 0x7F000000lu - - -/* MXVR_ALLOC_4 Masks */ - -#define CIU16 0x00000080lu -#define CIU17 0x00008000lu -#define CIU18 0x00800000lu -#define CIU19 0x80000000lu - -#define CL16 0x0000007Flu -#define CL17 0x00007F00lu -#define CL18 0x007F0000lu -#define CL19 0x7F000000lu - - -/* MXVR_ALLOC_5 Masks */ - -#define CIU20 0x00000080lu -#define CIU21 0x00008000lu -#define CIU22 0x00800000lu -#define CIU23 0x80000000lu - -#define CL20 0x0000007Flu -#define CL21 0x00007F00lu -#define CL22 0x007F0000lu -#define CL23 0x7F000000lu - - -/* MXVR_ALLOC_6 Masks */ - -#define CIU24 0x00000080lu -#define CIU25 0x00008000lu -#define CIU26 0x00800000lu -#define CIU27 0x80000000lu - -#define CL24 0x0000007Flu -#define CL25 0x00007F00lu -#define CL26 0x007F0000lu -#define CL27 0x7F000000lu - - -/* MXVR_ALLOC_7 Masks */ - -#define CIU28 0x00000080lu -#define CIU29 0x00008000lu -#define CIU30 0x00800000lu -#define CIU31 0x80000000lu - -#define CL28 0x0000007Flu -#define CL29 0x00007F00lu -#define CL30 0x007F0000lu -#define CL31 0x7F000000lu - - -/* MXVR_ALLOC_8 Masks */ - -#define CIU32 0x00000080lu -#define CIU33 0x00008000lu -#define CIU34 0x00800000lu -#define CIU35 0x80000000lu - -#define CL32 0x0000007Flu -#define CL33 0x00007F00lu -#define CL34 0x007F0000lu -#define CL35 0x7F000000lu - - -/* MXVR_ALLOC_9 Masks */ - -#define CIU36 0x00000080lu -#define CIU37 0x00008000lu -#define CIU38 0x00800000lu -#define CIU39 0x80000000lu - -#define CL36 0x0000007Flu -#define CL37 0x00007F00lu -#define CL38 0x007F0000lu -#define CL39 0x7F000000lu - - -/* MXVR_ALLOC_10 Masks */ - -#define CIU40 0x00000080lu -#define CIU41 0x00008000lu -#define CIU42 0x00800000lu -#define CIU43 0x80000000lu - -#define CL40 0x0000007Flu -#define CL41 0x00007F00lu -#define CL42 0x007F0000lu -#define CL43 0x7F000000lu - - -/* MXVR_ALLOC_11 Masks */ - -#define CIU44 0x00000080lu -#define CIU45 0x00008000lu -#define CIU46 0x00800000lu -#define CIU47 0x80000000lu - -#define CL44 0x0000007Flu -#define CL45 0x00007F00lu -#define CL46 0x007F0000lu -#define CL47 0x7F000000lu - - -/* MXVR_ALLOC_12 Masks */ - -#define CIU48 0x00000080lu -#define CIU49 0x00008000lu -#define CIU50 0x00800000lu -#define CIU51 0x80000000lu - -#define CL48 0x0000007Flu -#define CL49 0x00007F00lu -#define CL50 0x007F0000lu -#define CL51 0x7F000000lu - - -/* MXVR_ALLOC_13 Masks */ - -#define CIU52 0x00000080lu -#define CIU53 0x00008000lu -#define CIU54 0x00800000lu -#define CIU55 0x80000000lu - -#define CL52 0x0000007Flu -#define CL53 0x00007F00lu -#define CL54 0x007F0000lu -#define CL55 0x7F000000lu - - -/* MXVR_ALLOC_14 Masks */ - -#define CIU56 0x00000080lu -#define CIU57 0x00008000lu -#define CIU58 0x00800000lu -#define CIU59 0x80000000lu - -#define CL56 0x0000007Flu -#define CL57 0x00007F00lu -#define CL58 0x007F0000lu -#define CL59 0x7F000000lu - - -/* MXVR_SYNC_LCHAN_0 Masks */ - -#define LCHANPC0 0x0000000Flu -#define LCHANPC1 0x000000F0lu -#define LCHANPC2 0x00000F00lu -#define LCHANPC3 0x0000F000lu -#define LCHANPC4 0x000F0000lu -#define LCHANPC5 0x00F00000lu -#define LCHANPC6 0x0F000000lu -#define LCHANPC7 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_1 Masks */ - -#define LCHANPC8 0x0000000Flu -#define LCHANPC9 0x000000F0lu -#define LCHANPC10 0x00000F00lu -#define LCHANPC11 0x0000F000lu -#define LCHANPC12 0x000F0000lu -#define LCHANPC13 0x00F00000lu -#define LCHANPC14 0x0F000000lu -#define LCHANPC15 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_2 Masks */ - -#define LCHANPC16 0x0000000Flu -#define LCHANPC17 0x000000F0lu -#define LCHANPC18 0x00000F00lu -#define LCHANPC19 0x0000F000lu -#define LCHANPC20 0x000F0000lu -#define LCHANPC21 0x00F00000lu -#define LCHANPC22 0x0F000000lu -#define LCHANPC23 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_3 Masks */ - -#define LCHANPC24 0x0000000Flu -#define LCHANPC25 0x000000F0lu -#define LCHANPC26 0x00000F00lu -#define LCHANPC27 0x0000F000lu -#define LCHANPC28 0x000F0000lu -#define LCHANPC29 0x00F00000lu -#define LCHANPC30 0x0F000000lu -#define LCHANPC31 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_4 Masks */ - -#define LCHANPC32 0x0000000Flu -#define LCHANPC33 0x000000F0lu -#define LCHANPC34 0x00000F00lu -#define LCHANPC35 0x0000F000lu -#define LCHANPC36 0x000F0000lu -#define LCHANPC37 0x00F00000lu -#define LCHANPC38 0x0F000000lu -#define LCHANPC39 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_5 Masks */ - -#define LCHANPC40 0x0000000Flu -#define LCHANPC41 0x000000F0lu -#define LCHANPC42 0x00000F00lu -#define LCHANPC43 0x0000F000lu -#define LCHANPC44 0x000F0000lu -#define LCHANPC45 0x00F00000lu -#define LCHANPC46 0x0F000000lu -#define LCHANPC47 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_6 Masks */ - -#define LCHANPC48 0x0000000Flu -#define LCHANPC49 0x000000F0lu -#define LCHANPC50 0x00000F00lu -#define LCHANPC51 0x0000F000lu -#define LCHANPC52 0x000F0000lu -#define LCHANPC53 0x00F00000lu -#define LCHANPC54 0x0F000000lu -#define LCHANPC55 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_7 Masks */ - -#define LCHANPC56 0x0000000Flu -#define LCHANPC57 0x000000F0lu -#define LCHANPC58 0x00000F00lu -#define LCHANPC59 0x0000F000lu - - -/* MXVR_DMAx_CONFIG Masks */ - -#define MDMAEN 0x00000001lu -#define DD 0x00000002lu -#define LCHAN 0x000003C0lu -#define BITSWAPEN 0x00000400lu -#define BYSWAPEN 0x00000800lu -#define MFLOW 0x00007000lu -#define FIXEDPM 0x00080000lu -#define STARTPAT 0x00300000lu -#define STOPPAT 0x00C00000lu -#define COUNTPOS 0x1C000000lu - -#define DD_TX 0x00000000lu -#define DD_RX 0x00000002lu - -#define LCHAN_0 0x00000000lu -#define LCHAN_1 0x00000040lu -#define LCHAN_2 0x00000080lu -#define LCHAN_3 0x000000C0lu -#define LCHAN_4 0x00000100lu -#define LCHAN_5 0x00000140lu -#define LCHAN_6 0x00000180lu -#define LCHAN_7 0x000001C0lu - -#define MFLOW_STOP 0x00000000lu -#define MFLOW_AUTO 0x00001000lu -#define MFLOW_PVC 0x00002000lu -#define MFLOW_PSS 0x00003000lu -#define MFLOW_PFC 0x00004000lu - -#define STARTPAT_0 0x00000000lu -#define STARTPAT_1 0x00100000lu - -#define STOPPAT_0 0x00000000lu -#define STOPPAT_1 0x00400000lu - -#define COUNTPOS_0 0x00000000lu -#define COUNTPOS_1 0x04000000lu -#define COUNTPOS_2 0x08000000lu -#define COUNTPOS_3 0x0C000000lu -#define COUNTPOS_4 0x10000000lu -#define COUNTPOS_5 0x14000000lu -#define COUNTPOS_6 0x18000000lu -#define COUNTPOS_7 0x1C000000lu - - -/* MXVR_AP_CTL Masks */ - -#define STARTAP 0x00000001lu -#define CANCELAP 0x00000002lu -#define RESETAP 0x00000004lu -#define APRBE0 0x00004000lu -#define APRBE1 0x00008000lu -#define APRBEX 0x0000C000lu - - -/* MXVR_CM_CTL Masks */ - -#define STARTCM 0x00000001lu -#define CANCELCM 0x00000002lu -#define CMRBEX 0xFFFF0000lu -#define CMRBE0 0x00010000lu -#define CMRBE1 0x00020000lu -#define CMRBE2 0x00040000lu -#define CMRBE3 0x00080000lu -#define CMRBE4 0x00100000lu -#define CMRBE5 0x00200000lu -#define CMRBE6 0x00400000lu -#define CMRBE7 0x00800000lu -#define CMRBE8 0x01000000lu -#define CMRBE9 0x02000000lu -#define CMRBE10 0x04000000lu -#define CMRBE11 0x08000000lu -#define CMRBE12 0x10000000lu -#define CMRBE13 0x20000000lu -#define CMRBE14 0x40000000lu -#define CMRBE15 0x80000000lu - - -/* MXVR_PAT_DATA_x Masks */ - -#define MATCH_DATA_0 0x000000FFlu -#define MATCH_DATA_1 0x0000FF00lu -#define MATCH_DATA_2 0x00FF0000lu -#define MATCH_DATA_3 0xFF000000lu - - - -/* MXVR_PAT_EN_x Masks */ - -#define MATCH_EN_0_0 0x00000001lu -#define MATCH_EN_0_1 0x00000002lu -#define MATCH_EN_0_2 0x00000004lu -#define MATCH_EN_0_3 0x00000008lu -#define MATCH_EN_0_4 0x00000010lu -#define MATCH_EN_0_5 0x00000020lu -#define MATCH_EN_0_6 0x00000040lu -#define MATCH_EN_0_7 0x00000080lu - -#define MATCH_EN_1_0 0x00000100lu -#define MATCH_EN_1_1 0x00000200lu -#define MATCH_EN_1_2 0x00000400lu -#define MATCH_EN_1_3 0x00000800lu -#define MATCH_EN_1_4 0x00001000lu -#define MATCH_EN_1_5 0x00002000lu -#define MATCH_EN_1_6 0x00004000lu -#define MATCH_EN_1_7 0x00008000lu - -#define MATCH_EN_2_0 0x00010000lu -#define MATCH_EN_2_1 0x00020000lu -#define MATCH_EN_2_2 0x00040000lu -#define MATCH_EN_2_3 0x00080000lu -#define MATCH_EN_2_4 0x00100000lu -#define MATCH_EN_2_5 0x00200000lu -#define MATCH_EN_2_6 0x00400000lu -#define MATCH_EN_2_7 0x00800000lu - -#define MATCH_EN_3_0 0x01000000lu -#define MATCH_EN_3_1 0x02000000lu -#define MATCH_EN_3_2 0x04000000lu -#define MATCH_EN_3_3 0x08000000lu -#define MATCH_EN_3_4 0x10000000lu -#define MATCH_EN_3_5 0x20000000lu -#define MATCH_EN_3_6 0x40000000lu -#define MATCH_EN_3_7 0x80000000lu - - -/* MXVR_ROUTING_0 Masks */ - -#define MUTE_CH0 0x00000080lu -#define MUTE_CH1 0x00008000lu -#define MUTE_CH2 0x00800000lu -#define MUTE_CH3 0x80000000lu - -#define TX_CH0 0x0000007Flu -#define TX_CH1 0x00007F00lu -#define TX_CH2 0x007F0000lu -#define TX_CH3 0x7F000000lu - - -/* MXVR_ROUTING_1 Masks */ - -#define MUTE_CH4 0x00000080lu -#define MUTE_CH5 0x00008000lu -#define MUTE_CH6 0x00800000lu -#define MUTE_CH7 0x80000000lu - -#define TX_CH4 0x0000007Flu -#define TX_CH5 0x00007F00lu -#define TX_CH6 0x007F0000lu -#define TX_CH7 0x7F000000lu - - -/* MXVR_ROUTING_2 Masks */ - -#define MUTE_CH8 0x00000080lu -#define MUTE_CH9 0x00008000lu -#define MUTE_CH10 0x00800000lu -#define MUTE_CH11 0x80000000lu - -#define TX_CH8 0x0000007Flu -#define TX_CH9 0x00007F00lu -#define TX_CH10 0x007F0000lu -#define TX_CH11 0x7F000000lu - -/* MXVR_ROUTING_3 Masks */ - -#define MUTE_CH12 0x00000080lu -#define MUTE_CH13 0x00008000lu -#define MUTE_CH14 0x00800000lu -#define MUTE_CH15 0x80000000lu - -#define TX_CH12 0x0000007Flu -#define TX_CH13 0x00007F00lu -#define TX_CH14 0x007F0000lu -#define TX_CH15 0x7F000000lu - - -/* MXVR_ROUTING_4 Masks */ - -#define MUTE_CH16 0x00000080lu -#define MUTE_CH17 0x00008000lu -#define MUTE_CH18 0x00800000lu -#define MUTE_CH19 0x80000000lu - -#define TX_CH16 0x0000007Flu -#define TX_CH17 0x00007F00lu -#define TX_CH18 0x007F0000lu -#define TX_CH19 0x7F000000lu - - -/* MXVR_ROUTING_5 Masks */ - -#define MUTE_CH20 0x00000080lu -#define MUTE_CH21 0x00008000lu -#define MUTE_CH22 0x00800000lu -#define MUTE_CH23 0x80000000lu - -#define TX_CH20 0x0000007Flu -#define TX_CH21 0x00007F00lu -#define TX_CH22 0x007F0000lu -#define TX_CH23 0x7F000000lu - - -/* MXVR_ROUTING_6 Masks */ - -#define MUTE_CH24 0x00000080lu -#define MUTE_CH25 0x00008000lu -#define MUTE_CH26 0x00800000lu -#define MUTE_CH27 0x80000000lu - -#define TX_CH24 0x0000007Flu -#define TX_CH25 0x00007F00lu -#define TX_CH26 0x007F0000lu -#define TX_CH27 0x7F000000lu - - -/* MXVR_ROUTING_7 Masks */ - -#define MUTE_CH28 0x00000080lu -#define MUTE_CH29 0x00008000lu -#define MUTE_CH30 0x00800000lu -#define MUTE_CH31 0x80000000lu - -#define TX_CH28 0x0000007Flu -#define TX_CH29 0x00007F00lu -#define TX_CH30 0x007F0000lu -#define TX_CH31 0x7F000000lu - - -/* MXVR_ROUTING_8 Masks */ - -#define MUTE_CH32 0x00000080lu -#define MUTE_CH33 0x00008000lu -#define MUTE_CH34 0x00800000lu -#define MUTE_CH35 0x80000000lu - -#define TX_CH32 0x0000007Flu -#define TX_CH33 0x00007F00lu -#define TX_CH34 0x007F0000lu -#define TX_CH35 0x7F000000lu - - -/* MXVR_ROUTING_9 Masks */ - -#define MUTE_CH36 0x00000080lu -#define MUTE_CH37 0x00008000lu -#define MUTE_CH38 0x00800000lu -#define MUTE_CH39 0x80000000lu - -#define TX_CH36 0x0000007Flu -#define TX_CH37 0x00007F00lu -#define TX_CH38 0x007F0000lu -#define TX_CH39 0x7F000000lu - - -/* MXVR_ROUTING_10 Masks */ - -#define MUTE_CH40 0x00000080lu -#define MUTE_CH41 0x00008000lu -#define MUTE_CH42 0x00800000lu -#define MUTE_CH43 0x80000000lu - -#define TX_CH40 0x0000007Flu -#define TX_CH41 0x00007F00lu -#define TX_CH42 0x007F0000lu -#define TX_CH43 0x7F000000lu - - -/* MXVR_ROUTING_11 Masks */ - -#define MUTE_CH44 0x00000080lu -#define MUTE_CH45 0x00008000lu -#define MUTE_CH46 0x00800000lu -#define MUTE_CH47 0x80000000lu - -#define TX_CH44 0x0000007Flu -#define TX_CH45 0x00007F00lu -#define TX_CH46 0x007F0000lu -#define TX_CH47 0x7F000000lu - - -/* MXVR_ROUTING_12 Masks */ - -#define MUTE_CH48 0x00000080lu -#define MUTE_CH49 0x00008000lu -#define MUTE_CH50 0x00800000lu -#define MUTE_CH51 0x80000000lu - -#define TX_CH48 0x0000007Flu -#define TX_CH49 0x00007F00lu -#define TX_CH50 0x007F0000lu -#define TX_CH51 0x7F000000lu - - -/* MXVR_ROUTING_13 Masks */ - -#define MUTE_CH52 0x00000080lu -#define MUTE_CH53 0x00008000lu -#define MUTE_CH54 0x00800000lu -#define MUTE_CH55 0x80000000lu - -#define TX_CH52 0x0000007Flu -#define TX_CH53 0x00007F00lu -#define TX_CH54 0x007F0000lu -#define TX_CH55 0x7F000000lu - - -/* MXVR_ROUTING_14 Masks */ - -#define MUTE_CH56 0x00000080lu -#define MUTE_CH57 0x00008000lu -#define MUTE_CH58 0x00800000lu -#define MUTE_CH59 0x80000000lu - -#define TX_CH56 0x0000007Flu -#define TX_CH57 0x00007F00lu -#define TX_CH58 0x007F0000lu -#define TX_CH59 0x7F000000lu - - -/* Control Message Receive Buffer (CMRB) Address Offsets */ - -#define CMRB_STRIDE 0x00000016lu - -#define CMRB_DST_OFFSET 0x00000000lu -#define CMRB_SRC_OFFSET 0x00000002lu -#define CMRB_DATA_OFFSET 0x00000005lu - - -/* Control Message Transmit Buffer (CMTB) Address Offsets */ - -#define CMTB_PRIO_OFFSET 0x00000000lu -#define CMTB_DST_OFFSET 0x00000002lu -#define CMTB_SRC_OFFSET 0x00000004lu -#define CMTB_TYPE_OFFSET 0x00000006lu -#define CMTB_DATA_OFFSET 0x00000007lu - -#define CMTB_ANSWER_OFFSET 0x0000000Alu - -#define CMTB_STAT_N_OFFSET 0x00000018lu -#define CMTB_STAT_A_OFFSET 0x00000016lu -#define CMTB_STAT_D_OFFSET 0x0000000Elu -#define CMTB_STAT_R_OFFSET 0x00000014lu -#define CMTB_STAT_W_OFFSET 0x00000014lu -#define CMTB_STAT_G_OFFSET 0x00000014lu - - -/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */ - -#define APRB_STRIDE 0x00000400lu - -#define APRB_DST_OFFSET 0x00000000lu -#define APRB_LEN_OFFSET 0x00000002lu -#define APRB_SRC_OFFSET 0x00000004lu -#define APRB_DATA_OFFSET 0x00000006lu - - -/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */ - -#define APTB_PRIO_OFFSET 0x00000000lu -#define APTB_DST_OFFSET 0x00000002lu -#define APTB_LEN_OFFSET 0x00000004lu -#define APTB_SRC_OFFSET 0x00000006lu -#define APTB_DATA_OFFSET 0x00000008lu - - -/* Remote Read Buffer (RRDB) Address Offsets */ - -#define RRDB_WADDR_OFFSET 0x00000100lu -#define RRDB_WLEN_OFFSET 0x00000101lu - - - /* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/ /* CAN_CONTROL Masks */ #define SRS 0x0001 /* Software Reset */ diff --git a/trunk/arch/blackfin/mach-bf538/include/mach/gpio.h b/trunk/arch/blackfin/mach-bf538/include/mach/gpio.h index 295c78a465c2..0c346fba9619 100644 --- a/trunk/arch/blackfin/mach-bf538/include/mach/gpio.h +++ b/trunk/arch/blackfin/mach-bf538/include/mach/gpio.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008 Analog Devices Inc. + * Copyright (C) 2008-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -7,11 +7,8 @@ #ifndef _MACH_GPIO_H_ #define _MACH_GPIO_H_ - /* FIXME: - * For now only support PORTF GPIOs. - * PORT C,D and E are for peripheral usage only - */ #define MAX_BLACKFIN_GPIOS 16 +#define BFIN_SPECIAL_GPIO_BANKS 3 #define GPIO_PF0 0 /* PF */ #define GPIO_PF1 1 diff --git a/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h index 6121cf8b5872..0083ba13ee9e 100644 --- a/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES 64 #define P_TMR2 (P_DONTCARE) #define P_TMR1 (P_DONTCARE) diff --git a/trunk/arch/blackfin/mach-bf548/Kconfig b/trunk/arch/blackfin/mach-bf548/Kconfig index a09623dfd550..70189a0d1a19 100644 --- a/trunk/arch/blackfin/mach-bf548/Kconfig +++ b/trunk/arch/blackfin/mach-bf548/Kconfig @@ -1,3 +1,27 @@ +config BF542 + def_bool y + depends on BF542_std || BF542M +config BF544 + def_bool y + depends on BF544_std || BF544M +config BF547 + def_bool y + depends on BF547_std || BF547M +config BF548 + def_bool y + depends on BF548_std || BF548M +config BF549 + def_bool y + depends on BF549_std || BF549M + +config BF54xM + def_bool y + depends on (BF542M || BF544M || BF547M || BF548M || BF549M) + +config BF54x + def_bool y + depends on (BF542 || BF544 || BF547 || BF548 || BF549) + if (BF54x) source "arch/blackfin/mach-bf548/boards/Kconfig" diff --git a/trunk/arch/blackfin/mach-bf548/boards/ezkit.c b/trunk/arch/blackfin/mach-bf548/boards/ezkit.c index 1a5286bbb3fa..60193f72777c 100644 --- a/trunk/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/trunk/arch/blackfin/mach-bf548/boards/ezkit.c @@ -62,7 +62,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -154,7 +154,7 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) #include static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -186,7 +186,7 @@ static struct platform_device bfin_rotary_device = { #endif #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) -#include +#include static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, .y_axis_offset = 0, @@ -210,14 +210,17 @@ static const struct adxl34x_platform_data adxl34x_info = { .ev_code_y = ABS_Y, /* EV_REL */ .ev_code_z = ABS_Z, /* EV_REL */ - .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ /* .ev_code_ff = KEY_F,*/ /* EV_KEY */ /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, .fifo_mode = ADXL_FIFO_STREAM, + .orientation_enable = ADXL_EN_ORIENTATION_3D, + .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, + .divisor_length = ADXL_LP_FILTER_DIVISOR_16, + /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ + .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, }; #endif @@ -461,6 +464,44 @@ static struct platform_device musb_device = { }; #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN0_RX, + .end = IRQ_CAN0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_TX, + .end = IRQ_CAN0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_ERROR, + .end = IRQ_CAN0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) static struct resource bfin_atapi_resources[] = { { @@ -953,6 +994,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_isp1760_device, #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can_device, +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) &bfin_atapi_device, #endif @@ -974,7 +1019,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bf54x_kpad_device, #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) &bfin_rotary_device, #endif diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h b/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h index 7bead5ce0f3b..751e5e11ecf8 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -81,18 +81,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) -#if defined(CONFIG_BF542M) -# define CONFIG_BF542 -#elif defined(CONFIG_BF544M) -# define CONFIG_BF544 -#elif defined(CONFIG_BF547M) -# define CONFIG_BF547 -#elif defined(CONFIG_BF548M) -# define CONFIG_BF548 -#elif defined(CONFIG_BF549M) -# define CONFIG_BF549 -#endif - #if defined(CONFIG_BF542) # define CPU "BF542" # define CPUID 0x27de diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/blackfin.h b/trunk/arch/blackfin/mach-bf548/include/mach/blackfin.h index 13302b67857a..5684030ccc21 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/blackfin.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -64,10 +64,4 @@ #define OFFSET_THR 0x28 /* Transmit Holding register */ #define OFFSET_RBR 0x2C /* Receive Buffer register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF547.h index 423421515134..bc650e6ea482 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF547.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF547.h @@ -4,21 +4,21 @@ * Licensed under the GPL-2 or later. */ -#ifndef _CDEF_BF548_H -#define _CDEF_BF548_H +#ifndef _CDEF_BF547_H +#define _CDEF_BF547_H /* include all Core registers and bit definitions */ -#include "defBF548.h" +#include "defBF547.h" /* include core sbfin_read_()ecific register pointer definitions */ #include -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */ /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ #include "cdefBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ +/* The following are the #defines needed by ADSP-BF547 that are not in the common header */ /* Timer Registers */ @@ -805,4 +805,4 @@ #define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) #define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) -#endif /* _CDEF_BF548_H */ +#endif /* _CDEF_BF547_H */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF548.h index df84180410c4..3523e08f7968 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF548.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF548.h @@ -18,165 +18,8 @@ /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ #include "cdefBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ - -/* Timer Registers */ - -#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) -#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) -#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) -#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) -#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) -#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) -#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) -#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) -#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) -#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) -#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) -#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) -#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) -#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) -#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) -#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) -#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) -#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) -#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) -#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) -#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) -#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) -#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) -#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) - -/* Timer Groubfin_read_() of 3 */ - -#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) -#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) -#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) -#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) -#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) -#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) - -/* SPORT0 Registers */ - -#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) -#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) -#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) -#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) -#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) -#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) -#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) -#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) -#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) -#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) -#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) -#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) -#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) -#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) -#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) -#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) -#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) -#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) -#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) -#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) -#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) -#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) -#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) -#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) -#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) -#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) -#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) -#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) -#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) -#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) -#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) -#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) -#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) -#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) -#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) -#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) -#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) -#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) -#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) -#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) -#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) -#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) -#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) - -/* EPPI0 Registers */ - -#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) -#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) -#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) -#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) -#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) -#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) -#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) -#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) -#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) -#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) -#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) -#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) -#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) -#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) -#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) -#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) -#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) -#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) -#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) -#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) -#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) -#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) -#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) -#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) -#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) -#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) -#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) -#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) - -/* UART2 Registers */ - -#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) -#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) -#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) -#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) -#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) -#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) -#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) -#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) -#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) -#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) -#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) -#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) -#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) -#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) -#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) -#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) -#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) -#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) -#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) -#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) -#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) -#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) - -/* Two Wire Interface Registers (TWI1) */ - -/* SPI2 Registers */ - -#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) -#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) -#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) -#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) -#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) -#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) -#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) -#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) -#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) -#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) -#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) -#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) -#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) -#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) +/* The BF548 is like the BF547, but has additional CANs */ +#include "cdefBF547.h" /* CAN Controller 1 Config 1 Registers */ @@ -923,631 +766,4 @@ #define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) #define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) -/* ATAPI Registers */ - -#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) -#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) -#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) -#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) -#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) -#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) -#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) -#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) -#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) -#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) -#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) -#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) -#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) -#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) -#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) -#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) -#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) -#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) -#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) -#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) -#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) -#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) -#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) -#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) -#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) -#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) -#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) -#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) -#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) -#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) -#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) -#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) -#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) -#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) -#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) -#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) -#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) -#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) -#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) -#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) -#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) -#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) -#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) -#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) - -/* SDH Registers */ - -#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) -#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) -#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) -#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) -#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) -#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) -#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) -#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) -#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) -#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) -#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) -#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) -#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) -#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) -#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) -#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) -#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) -#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) -#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) -#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) -#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) -#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) -#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) -#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) -#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) -#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) -#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) -#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) -#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) -#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) -#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) -#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) -#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) -#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) -#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) -#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) -#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) -#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) -#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) -#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) -#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) -#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) -#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) -#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) -#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) -#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) -#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) -#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) -#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) -#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) -#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) -#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) -#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) -#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) -#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) -#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) -#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) -#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) -#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) -#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) -#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) -#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) - -/* HOST Port Registers */ - -#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) -#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) -#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) -#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) -#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) -#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) - -/* USB Control Registers */ - -#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) -#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) -#define bfin_read_USB_POWER() bfin_read16(USB_POWER) -#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) -#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) -#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) -#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) -#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) -#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) -#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) -#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) -#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) -#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) -#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) -#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) -#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) -#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) -#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) -#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) -#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) -#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) -#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) -#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) -#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) - -/* USB Packet Control Registers */ - -#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) -#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) -#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) -#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) -#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) -#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) -#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) -#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) -#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) -#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) -#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) -#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) -#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) -#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) -#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) -#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) -#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) -#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) -#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) -#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) -#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) -#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) -#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) -#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) -#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) -#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) - -/* USB Endbfin_read_()oint FIFO Registers */ - -#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) -#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) -#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) -#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) -#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) -#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) -#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) -#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) -#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) -#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) -#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) -#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) -#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) -#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) -#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) -#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) - -/* USB OTG Control Registers */ - -#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) -#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) -#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) -#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) -#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) - -/* USB Phy Control Registers */ - -#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) -#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) -#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) -#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) -#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) -#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) -#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) -#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) -#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) -#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) - -/* (APHY_CNTRL is for ADI usage only) */ - -#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) -#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) - -/* (APHY_CALIB is for ADI usage only) */ - -#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) -#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) -#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) -#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) - -/* (PHY_TEST is for ADI usage only) */ - -#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) -#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) -#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) -#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) -#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) -#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) - -/* USB Endbfin_read_()oint 0 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) -#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) -#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) -#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) -#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) -#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) -#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) -#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) -#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) -#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) -#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) -#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) -#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) -#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) -#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) -#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) -#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) -#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 1 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) -#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) -#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) -#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) -#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) -#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) -#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) -#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) -#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) -#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) -#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) -#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) -#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) -#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) -#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) -#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) -#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) -#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 2 Control Registers */ - -#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) -#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) -#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) -#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) -#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) -#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) -#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) -#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) -#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) -#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) -#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) -#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) -#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) -#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) -#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) -#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) -#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) -#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 3 Control Registers */ - -#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) -#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) -#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) -#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) -#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) -#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) -#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) -#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) -#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) -#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) -#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) -#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) -#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) -#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) -#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) -#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) -#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) -#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 4 Control Registers */ - -#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) -#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) -#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) -#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) -#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) -#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) -#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) -#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) -#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) -#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) -#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) -#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) -#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) -#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) -#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) -#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) -#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) -#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 5 Control Registers */ - -#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) -#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) -#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) -#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) -#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) -#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) -#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) -#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) -#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) -#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) -#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) -#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) -#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) -#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) -#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) -#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) -#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) -#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 6 Control Registers */ - -#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) -#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) -#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) -#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) -#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) -#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) -#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) -#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) -#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) -#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) -#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) -#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) -#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) -#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) -#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) -#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) -#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) -#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 7 Control Registers */ - -#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) -#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) -#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) -#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) -#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) -#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) -#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) -#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) -#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) -#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) -#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) -#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) -#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) -#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) -#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) -#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) -#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) -#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) -#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) -#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) -#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) -#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) - -/* USB Channel 0 Config Registers */ - -#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) -#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) -#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) -#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) -#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) -#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) -#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) -#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) -#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) -#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) - -/* USB Channel 1 Config Registers */ - -#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) -#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) -#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) -#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) -#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) -#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) -#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) -#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) -#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) -#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) - -/* USB Channel 2 Config Registers */ - -#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) -#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) -#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) -#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) -#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) -#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) -#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) -#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) -#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) -#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) - -/* USB Channel 3 Config Registers */ - -#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) -#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) -#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) -#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) -#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) -#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) -#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) -#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) -#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) -#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) - -/* USB Channel 4 Config Registers */ - -#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) -#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) -#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) -#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) -#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) -#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) -#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) -#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) -#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) -#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) - -/* USB Channel 5 Config Registers */ - -#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) -#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) -#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) -#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) -#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) -#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) -#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) -#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) -#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) - -/* USB Channel 6 Config Registers */ - -#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) -#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) -#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) -#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) -#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) -#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) -#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) -#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) -#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) -#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) - -/* USB Channel 7 Config Registers */ - -#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) -#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) -#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) -#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) -#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) -#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) -#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) -#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) -#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) -#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) - -/* Keybfin_read_()ad Registers */ - -#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) -#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) -#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) -#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) -#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) -#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) -#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) -#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) -#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) -#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) -#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) -#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) - -/* Pixel Combfin_read_()ositor (PIXC) Registers */ - -#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) -#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) -#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) -#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) -#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) -#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) -#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) -#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) -#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) -#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) -#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) -#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) -#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) -#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) -#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) -#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) -#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) -#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) -#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) -#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) -#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) -#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) -#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) -#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) -#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) -#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) -#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) -#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) -#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) -#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) -#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) -#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) -#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) -#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) -#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) -#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) -#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) -#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) - -/* Handshake MDMA 0 Registers */ - -#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) -#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) -#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) -#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) -#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) -#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) -#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) -#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) -#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) -#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) -#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) -#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) -#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) -#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) - -/* Handshake MDMA 1 Registers */ - -#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) -#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) -#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) -#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) -#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) -#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) -#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) -#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) -#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) -#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) -#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) -#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) -#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) -#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) - #endif /* _CDEF_BF548_H */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF549.h index 34c84c7fb256..80201ed41f80 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF549.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF549.h @@ -18,165 +18,8 @@ /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ #include "cdefBF54x_base.h" -/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ - -/* Timer Registers */ - -#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) -#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) -#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) -#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) -#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) -#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) -#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) -#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) -#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) -#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) -#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) -#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) -#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) -#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) -#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) -#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) -#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) -#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) -#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) -#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) -#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) -#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) -#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) -#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) - -/* Timer Groubfin_read_() of 3 */ - -#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) -#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) -#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) -#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) -#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) -#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) - -/* SPORT0 Registers */ - -#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) -#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) -#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) -#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) -#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) -#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) -#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) -#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) -#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) -#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) -#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) -#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) -#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) -#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) -#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) -#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) -#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) -#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) -#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) -#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) -#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) -#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) -#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) -#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) -#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) -#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) -#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) -#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) -#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) -#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) -#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) -#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) -#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) -#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) -#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) -#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) -#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) -#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) -#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) -#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) -#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) -#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) -#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) - -/* EPPI0 Registers */ - -#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) -#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) -#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) -#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) -#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) -#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) -#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) -#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) -#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) -#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) -#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) -#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) -#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) -#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) -#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) -#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) -#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) -#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) -#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) -#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) -#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) -#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) -#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) -#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) -#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) -#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) -#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) -#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) - -/* UART2 Registers */ - -#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) -#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) -#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) -#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) -#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) -#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) -#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) -#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) -#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) -#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) -#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) -#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) -#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) -#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) -#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) -#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) -#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) -#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) -#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) -#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) -#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) -#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) - -/* Two Wire Interface Registers (TWI1) */ - -/* SPI2 Registers */ - -#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) -#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) -#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) -#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) -#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) -#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) -#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) -#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) -#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) -#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) -#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) -#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) -#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) -#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) +/* The BF549 is like the BF544, but has MXVR */ +#include "cdefBF547.h" /* MXVR Registers */ @@ -464,1376 +307,4 @@ #define bfin_read_MXVR_SCLK_CNT() bfin_read16(MXVR_SCLK_CNT) #define bfin_write_MXVR_SCLK_CNT(val) bfin_write16(MXVR_SCLK_CNT, val) -/* CAN Controller 1 Config 1 Registers */ - -#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) -#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) -#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) -#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) -#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) -#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) -#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) -#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) -#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) -#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) -#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) -#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) -#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) -#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) -#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) -#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) -#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) -#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) -#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) -#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) -#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) -#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) -#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) -#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) -#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) -#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) - -/* CAN Controller 1 Config 2 Registers */ - -#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) -#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) -#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) -#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) -#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) -#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) -#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) -#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) -#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) -#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) -#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) -#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) -#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) -#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) -#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) -#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) -#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) -#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) -#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) -#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) -#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) -#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) -#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) -#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) -#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) -#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) - -/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ - -#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) -#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) -#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) -#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) -#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) -#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) -#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) -#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) -#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) -#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) -#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) -#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) -#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) -#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) -#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) -#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) -#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) -#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) -#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) -#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) -#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) -#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) -#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) -#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) -#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) -#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) -#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) -#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) -#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) -#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) -#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) -#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) - -/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ - -#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) -#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) -#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) -#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) -#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) -#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) -#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) -#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) -#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) -#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) -#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) -#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) -#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) -#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) -#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) -#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) -#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) -#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) -#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) -#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) -#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) -#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) -#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) -#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) -#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) -#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) -#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) -#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) -#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) -#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) -#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) -#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) -#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) -#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) -#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) -#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) -#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) -#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) -#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) -#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) -#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) -#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) -#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) -#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) -#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) -#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) -#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) -#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) -#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) -#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) -#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) -#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) -#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) -#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) -#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) -#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) -#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) -#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) -#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) -#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) -#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) -#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) -#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) -#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) - -/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ - -#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) -#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) -#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) -#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) -#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) -#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) -#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) -#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) -#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) -#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) -#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) -#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) -#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) -#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) -#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) -#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) -#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) -#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) -#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) -#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) -#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) -#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) -#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) -#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) -#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) -#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) -#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) -#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) -#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) -#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) -#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) -#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) -#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) -#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) -#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) -#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) -#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) -#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) -#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) -#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) -#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) -#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) -#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) -#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) -#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) -#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) -#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) -#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) -#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) -#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) -#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) -#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) -#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) -#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) -#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) -#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) -#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) -#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) -#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) -#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) -#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) -#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) -#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) -#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) - -/* CAN Controller 1 Mailbox Data Registers */ - -#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) -#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) -#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) -#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) -#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) -#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) -#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) -#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) -#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) -#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) -#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) -#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) -#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) -#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) -#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) -#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) -#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) -#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) -#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) -#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) -#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) -#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) -#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) -#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) -#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) -#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) -#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) -#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) -#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) -#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) -#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) -#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) -#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) -#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) -#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) -#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) -#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) -#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) -#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) -#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) -#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) -#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) -#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) -#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) -#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) -#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) -#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) -#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) -#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) -#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) -#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) -#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) -#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) -#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) -#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) -#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) -#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) -#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) -#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) -#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) -#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) -#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) -#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) -#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) -#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) -#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) -#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) -#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) -#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) -#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) -#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) -#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) -#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) -#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) -#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) -#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) -#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) -#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) -#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) -#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) -#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) -#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) -#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) -#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) -#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) -#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) -#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) -#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) -#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) -#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) -#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) -#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) -#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) -#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) -#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) -#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) -#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) -#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) -#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) -#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) -#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) -#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) -#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) -#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) -#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) -#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) -#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) -#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) -#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) -#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) -#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) -#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) -#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) -#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) -#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) -#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) -#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) -#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) -#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) -#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) -#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) -#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) -#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) -#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) -#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) -#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) -#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) -#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) -#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) -#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) -#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) -#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) -#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) -#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) -#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) -#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) -#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) -#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) -#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) -#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) -#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) -#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) -#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) -#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) -#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) -#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) -#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) -#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) -#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) -#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) -#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) -#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) -#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) -#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) -#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) -#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) -#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) -#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) -#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) -#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) -#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) -#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) -#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) -#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) -#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) -#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) -#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) -#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) -#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) -#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) -#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) -#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) -#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) -#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) -#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) -#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) -#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) -#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) -#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) -#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) -#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) -#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) -#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) -#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) -#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) -#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) -#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) -#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) -#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) -#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) -#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) -#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) -#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) -#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) -#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) -#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) -#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) -#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) -#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) -#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) -#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) -#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) -#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) -#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) -#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) -#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) -#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) -#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) -#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) -#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) -#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) -#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) -#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) -#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) -#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) -#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) -#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) -#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) -#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) -#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) -#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) -#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) -#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) -#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) -#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) -#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) -#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) -#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) -#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) -#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) -#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) -#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) -#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) -#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) -#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) -#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) -#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) -#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) -#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) -#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) -#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) -#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) -#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) -#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) -#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) -#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) -#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) -#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) -#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) -#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) -#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) -#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) -#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) -#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) -#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) -#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) - -/* CAN Controller 1 Mailbox Data Registers */ - -#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) -#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) -#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) -#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) -#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) -#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) -#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) -#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) -#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) -#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) -#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) -#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) -#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) -#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) -#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) -#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) -#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) -#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) -#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) -#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) -#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) -#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) -#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) -#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) -#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) -#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) -#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) -#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) -#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) -#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) -#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) -#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) -#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) -#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) -#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) -#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) -#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) -#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) -#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) -#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) -#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) -#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) -#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) -#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) -#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) -#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) -#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) -#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) -#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) -#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) -#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) -#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) -#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) -#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) -#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) -#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) -#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) -#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) -#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) -#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) -#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) -#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) -#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) -#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) -#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) -#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) -#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) -#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) -#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) -#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) -#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) -#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) -#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) -#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) -#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) -#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) -#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) -#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) -#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) -#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) -#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) -#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) -#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) -#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) -#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) -#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) -#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) -#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) -#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) -#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) -#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) -#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) -#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) -#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) -#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) -#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) -#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) -#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) -#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) -#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) -#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) -#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) -#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) -#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) -#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) -#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) -#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) -#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) -#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) -#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) -#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) -#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) -#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) -#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) -#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) -#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) -#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) -#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) -#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) -#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) -#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) -#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) -#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) -#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) -#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) -#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) -#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) -#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) -#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) -#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) -#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) -#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) -#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) -#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) -#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) -#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) -#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) -#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) -#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) -#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) -#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) -#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) -#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) -#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) -#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) -#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) -#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) -#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) -#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) -#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) -#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) -#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) -#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) -#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) -#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) -#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) -#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) -#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) -#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) -#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) -#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) -#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) -#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) -#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) -#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) -#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) -#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) -#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) -#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) -#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) -#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) -#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) -#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) -#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) -#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) -#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) -#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) -#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) -#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) -#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) -#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) -#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) -#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) -#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) -#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) -#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) -#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) -#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) -#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) -#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) -#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) -#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) -#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) -#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) -#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) -#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) -#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) -#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) -#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) -#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) -#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) -#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) -#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) -#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) -#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) -#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) -#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) -#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) -#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) -#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) -#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) -#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) -#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) -#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) -#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) -#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) -#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) -#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) -#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) -#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) -#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) -#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) -#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) -#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) -#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) -#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) -#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) -#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) -#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) -#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) -#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) -#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) -#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) -#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) -#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) -#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) -#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) -#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) -#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) -#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) -#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) -#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) -#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) -#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) -#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) -#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) -#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) -#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) -#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) -#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) -#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) -#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) -#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) -#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) -#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) -#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) - -/* ATAPI Registers */ - -#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) -#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) -#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) -#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) -#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) -#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) -#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) -#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) -#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) -#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) -#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) -#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) -#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) -#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) -#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) -#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) -#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) -#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) -#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) -#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) -#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) -#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) -#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) -#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) -#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) -#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) -#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) -#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) -#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) -#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) -#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) -#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) -#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) -#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) -#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) -#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) -#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) -#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) -#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) -#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) -#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) -#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) -#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) -#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) - -/* SDH Registers */ - -#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) -#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) -#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) -#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) -#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) -#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) -#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) -#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) -#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) -#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) -#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) -#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) -#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) -#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) -#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) -#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) -#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) -#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) -#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) -#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) -#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) -#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) -#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) -#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) -#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) -#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) -#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) -#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) -#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) -#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) -#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) -#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) -#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) -#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) -#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) -#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) -#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) -#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) -#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) -#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) -#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) -#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) -#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) -#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) -#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) -#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) -#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) -#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) -#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) -#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) -#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) -#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) -#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) -#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) -#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) -#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) -#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) -#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) -#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) -#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) -#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) -#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) - -/* HOST Port Registers */ - -#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) -#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) -#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) -#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) -#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) -#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) - -/* USB Control Registers */ - -#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) -#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) -#define bfin_read_USB_POWER() bfin_read16(USB_POWER) -#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) -#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) -#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) -#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) -#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) -#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) -#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) -#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) -#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) -#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) -#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) -#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) -#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) -#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) -#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) -#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) -#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) -#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) -#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) -#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) -#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) - -/* USB Packet Control Registers */ - -#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) -#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) -#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) -#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) -#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) -#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) -#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) -#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) -#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) -#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) -#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) -#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) -#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) -#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) -#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) -#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) -#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) -#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) -#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) -#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) -#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) -#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) -#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) -#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) -#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) -#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) - -/* USB Endbfin_read_()oint FIFO Registers */ - -#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) -#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) -#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) -#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) -#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) -#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) -#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) -#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) -#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) -#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) -#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) -#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) -#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) -#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) -#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) -#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) - -/* USB OTG Control Registers */ - -#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) -#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) -#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) -#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) -#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) - -/* USB Phy Control Registers */ - -#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) -#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) -#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) -#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) -#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) -#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) -#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) -#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) -#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) -#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) - -/* (APHY_CNTRL is for ADI usage only) */ - -#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) -#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) - -/* (APHY_CALIB is for ADI usage only) */ - -#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) -#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) -#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) -#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) - -/* (PHY_TEST is for ADI usage only) */ - -#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) -#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) -#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) -#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) -#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) -#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) - -/* USB Endbfin_read_()oint 0 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) -#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) -#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) -#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) -#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) -#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) -#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) -#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) -#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) -#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) -#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) -#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) -#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) -#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) -#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) -#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) -#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) -#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 1 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) -#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) -#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) -#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) -#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) -#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) -#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) -#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) -#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) -#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) -#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) -#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) -#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) -#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) -#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) -#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) -#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) -#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 2 Control Registers */ - -#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) -#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) -#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) -#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) -#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) -#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) -#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) -#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) -#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) -#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) -#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) -#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) -#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) -#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) -#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) -#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) -#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) -#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 3 Control Registers */ - -#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) -#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) -#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) -#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) -#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) -#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) -#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) -#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) -#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) -#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) -#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) -#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) -#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) -#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) -#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) -#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) -#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) -#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 4 Control Registers */ - -#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) -#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) -#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) -#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) -#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) -#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) -#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) -#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) -#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) -#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) -#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) -#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) -#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) -#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) -#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) -#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) -#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) -#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 5 Control Registers */ - -#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) -#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) -#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) -#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) -#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) -#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) -#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) -#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) -#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) -#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) -#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) -#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) -#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) -#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) -#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) -#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) -#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) -#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 6 Control Registers */ - -#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) -#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) -#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) -#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) -#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) -#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) -#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) -#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) -#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) -#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) -#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) -#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) -#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) -#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) -#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) -#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) -#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) -#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 7 Control Registers */ - -#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) -#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) -#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) -#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) -#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) -#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) -#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) -#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) -#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) -#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) -#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) -#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) -#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) -#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) -#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) -#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) -#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) -#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) -#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) -#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) -#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) -#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) - -/* USB Channel 0 Config Registers */ - -#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) -#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) -#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) -#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) -#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) -#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) -#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) -#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) -#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) -#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) - -/* USB Channel 1 Config Registers */ - -#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) -#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) -#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) -#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) -#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) -#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) -#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) -#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) -#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) -#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) - -/* USB Channel 2 Config Registers */ - -#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) -#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) -#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) -#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) -#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) -#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) -#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) -#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) -#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) -#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) - -/* USB Channel 3 Config Registers */ - -#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) -#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) -#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) -#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) -#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) -#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) -#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) -#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) -#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) -#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) - -/* USB Channel 4 Config Registers */ - -#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) -#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) -#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) -#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) -#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) -#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) -#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) -#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) -#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) -#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) - -/* USB Channel 5 Config Registers */ - -#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) -#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) -#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) -#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) -#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) -#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) -#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) -#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) -#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) - -/* USB Channel 6 Config Registers */ - -#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) -#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) -#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) -#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) -#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) -#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) -#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) -#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) -#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) -#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) - -/* USB Channel 7 Config Registers */ - -#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) -#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) -#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) -#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) -#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) -#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) -#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) -#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) -#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) -#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) - -/* Keybfin_read_()ad Registers */ - -#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) -#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) -#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) -#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) -#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) -#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) -#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) -#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) -#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) -#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) -#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) -#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) - -/* Pixel Combfin_read_()ositor (PIXC) Registers */ - -#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) -#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) -#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) -#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) -#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) -#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) -#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) -#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) -#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) -#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) -#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) -#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) -#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) -#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) -#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) -#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) -#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) -#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) -#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) -#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) -#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) -#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) -#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) -#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) -#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) -#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) -#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) -#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) -#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) -#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) -#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) -#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) -#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) -#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) -#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) -#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) -#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) -#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) - -/* Handshake MDMA 0 Registers */ - -#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) -#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) -#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) -#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) -#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) -#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) -#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) -#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) -#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) -#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) -#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) -#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) -#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) -#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) - -/* Handshake MDMA 1 Registers */ - -#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) -#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) -#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) -#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) -#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) -#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) -#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) -#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) -#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) -#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) -#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) -#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) -#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) -#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) - #endif /* _CDEF_BF549_H */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index a2e9d9849eba..32f71e6a7c15 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -2615,17 +2615,6 @@ #define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) #define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) -/* OTP/FUSE Registers */ - -#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) -#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) -#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) -#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) -#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) -#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) -#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) -#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) - /* Security Registers */ #define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) @@ -2640,17 +2629,6 @@ #define bfin_read_DMAC1_PERIMUX() bfin_read16(DMAC1_PERIMUX) #define bfin_write_DMAC1_PERIMUX(val) bfin_write16(DMAC1_PERIMUX, val) -/* OTP Read/Write Data Buffer Registers */ - -#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) -#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) -#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) -#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) -#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) -#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) -#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) -#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) - /* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */ /* legacy definitions */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/defBF544.h b/trunk/arch/blackfin/mach-bf548/include/mach/defBF544.h index 39f588dcd382..f916c52a148a 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -624,9 +624,9 @@ #define DMA_READY 0x1 /* DMA Ready */ #define FIFOFULL 0x2 /* FIFO Full */ #define FIFOEMPTY 0x4 /* FIFO Empty */ -#define COMPLETE 0x8 /* DMA Complete */ +#define DMA_COMPLETE 0x8 /* DMA Complete */ #define HSHK 0x10 /* Host Handshake */ -#define TIMEOUT 0x20 /* Host Timeout */ +#define HSTIMEOUT 0x20 /* Host Timeout */ #define HIRQ 0x40 /* Host Interrupt Request */ #define ALLOW_CNFG 0x80 /* Allow New Configuration */ #define DMA_DIR 0x100 /* DMA Direction */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/defBF547.h b/trunk/arch/blackfin/mach-bf548/include/mach/defBF547.h index c4dcf302d9f5..72c343646b2a 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -4,18 +4,18 @@ * Licensed under the ADI BSD license or the GPL-2 (or later) */ -#ifndef _DEF_BF548_H -#define _DEF_BF548_H +#ifndef _DEF_BF547_H +#define _DEF_BF547_H /* Include all Core registers and bit definitions */ #include -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */ /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ #include "defBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ +/* The following are the #defines needed by ADSP-BF547 that are not in the common header */ /* Timer Registers */ @@ -1217,4 +1217,4 @@ /* ******************************************* */ -#endif /* _DEF_BF548_H */ +#endif /* _DEF_BF547_H */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/defBF548.h b/trunk/arch/blackfin/mach-bf548/include/mach/defBF548.h index a5079980968c..3fb33b040ab7 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/defBF548.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -15,115 +15,8 @@ /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ #include "defBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ - -/* Timer Registers */ - -#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ -#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ -#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ -#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ -#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ -#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ -#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ -#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ -#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ -#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ -#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ -#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ - -/* Timer Group of 3 Registers */ - -#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ -#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ -#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ - -/* SPORT0 Registers */ - -#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ -#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ -#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ -#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ -#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ -#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ -#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ -#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ - -/* EPPI0 Registers */ - -#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ -#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ -#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ -#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ -#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ -#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ -#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ -#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ -#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ -#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ -#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ -#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ -#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ -#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ - -/* UART2 Registers */ - -#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ -#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ -#define UART2_GCTL 0xffc02108 /* Global Control Register */ -#define UART2_LCR 0xffc0210c /* Line Control Register */ -#define UART2_MCR 0xffc02110 /* Modem Control Register */ -#define UART2_LSR 0xffc02114 /* Line Status Register */ -#define UART2_MSR 0xffc02118 /* Modem Status Register */ -#define UART2_SCR 0xffc0211c /* Scratch Register */ -#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ -#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ -#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ - -/* Two Wire Interface Registers (TWI1) */ - -#define TWI1_REGBASE 0xffc02200 -#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ -#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ -#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ -#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ -#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ -#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ -#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ -#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ -#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ -#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ -#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ -#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ -#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ - -/* SPI2 Registers */ - -#define SPI2_REGBASE 0xffc02400 -#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ -#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ -#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ -#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ -#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ -#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ -#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ +/* The BF548 is like the BF547, but has additional CANs */ +#include "defBF547.h" /* CAN Controller 1 Config 1 Registers */ @@ -508,1096 +401,4 @@ #define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ #define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ -/* ATAPI Registers */ - -#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ -#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ -#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ -#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ -#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ -#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ -#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ -#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ -#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ -#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ -#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ -#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ -#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ -#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ -#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ -#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ -#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ -#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ -#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ -#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ -#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ -#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ -#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ -#define SDH_COMMAND 0xffc0390c /* SDH Command */ -#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ -#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ -#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ -#define SDH_STATUS 0xffc03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ -#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ -#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ -#define SDH_CFG 0xffc039c8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ -#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ - -/* HOST Port Registers */ - -#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ -#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ -#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ - -/* USB Control Registers */ - -#define USB_FADDR 0xffc03c00 /* Function address register */ -#define USB_POWER 0xffc03c04 /* Power management register */ -#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ -#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ -#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ -#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ -#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ -#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ -#define USB_FRAME 0xffc03c20 /* USB frame number */ -#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ -#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ -#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ -#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ - -/* USB Packet Control Registers */ - -#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ -#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ -#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ -#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ -#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ -#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ -#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* USB Endpoint FIFO Registers */ - -#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ -#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ -#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ -#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ -#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ -#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ -#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ -#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ - -/* USB OTG Control Registers */ - -#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ -#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ -#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ - -/* USB Phy Control Registers */ - -#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ -#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ -#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ -#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ -#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ - -/* (APHY_CNTRL is for ADI usage only) */ - -#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ - -/* (APHY_CALIB is for ADI usage only) */ - -#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ -#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ - -/* (PHY_TEST is for ADI usage only) */ - -#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ -#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ -#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ - -/* USB Endpoint 0 Control Registers */ - -#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ -#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ -#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ -#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ -#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ -#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ -#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ - -/* USB Endpoint 1 Control Registers */ - -#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ -#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ -#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ -#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ -#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ -#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ -#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ -#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ - -/* USB Endpoint 2 Control Registers */ - -#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ -#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ -#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ -#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ -#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ -#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ -#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ -#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ - -/* USB Endpoint 3 Control Registers */ - -#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ -#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ -#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ -#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ -#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ -#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ -#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ -#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ - -/* USB Endpoint 4 Control Registers */ - -#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ -#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ -#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ -#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ -#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ -#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ -#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ -#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ - -/* USB Endpoint 5 Control Registers */ - -#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ -#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ -#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ -#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ -#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ -#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ -#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ -#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ - -/* USB Endpoint 6 Control Registers */ - -#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ -#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ -#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ -#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ -#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ -#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ -#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ -#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ - -/* USB Endpoint 7 Control Registers */ - -#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ -#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ -#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ -#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ -#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ -#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ -#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ -#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ - -/* USB Channel 0 Config Registers */ - -#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ -#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ - -/* USB Channel 1 Config Registers */ - -#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ -#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ - -/* USB Channel 2 Config Registers */ - -#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ -#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ - -/* USB Channel 3 Config Registers */ - -#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ -#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ - -/* USB Channel 4 Config Registers */ - -#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ -#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ - -/* USB Channel 5 Config Registers */ - -#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ -#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ - -/* USB Channel 6 Config Registers */ - -#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ -#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ - -/* USB Channel 7 Config Registers */ - -#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ -#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ -#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ - -/* Keypad Registers */ - -#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ -#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ -#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ -#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ -#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ -#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ - -/* Pixel Compositor (PIXC) Registers */ - -#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ -#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ -#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ -#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ -#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ -#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ -#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ -#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ -#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ -#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ -#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ -#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ -#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ -#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ -#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ -#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ -#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ -#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ -#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ - -/* Handshake MDMA 0 Registers */ - -#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ -#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ -#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ -#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ -#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ -#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ - -/* Handshake MDMA 1 Registers */ - -#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ -#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ -#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ -#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ -#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ -#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ - - -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for PIXC_CTL */ - -#define PIXC_EN 0x1 /* Pixel Compositor Enable */ -#define OVR_A_EN 0x2 /* Overlay A Enable */ -#define OVR_B_EN 0x4 /* Overlay B Enable */ -#define IMG_FORM 0x8 /* Image Data Format */ -#define OVR_FORM 0x10 /* Overlay Data Format */ -#define OUT_FORM 0x20 /* Output Data Format */ -#define UDS_MOD 0x40 /* Resampling Mode */ -#define TC_EN 0x80 /* Transparent Color Enable */ -#define IMG_STAT 0x300 /* Image FIFO Status */ -#define OVR_STAT 0xc00 /* Overlay FIFO Status */ -#define WM_LVL 0x3000 /* FIFO Watermark Level */ - -/* Bit masks for PIXC_AHSTART */ - -#define A_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_AHEND */ - -#define A_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_AVSTART */ - -#define A_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_AVEND */ - -#define A_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_ATRANSP */ - -#define A_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_BHSTART */ - -#define B_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_BHEND */ - -#define B_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_BVSTART */ - -#define B_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_BVEND */ - -#define B_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_BTRANSP */ - -#define B_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_INTRSTAT */ - -#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ -#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ -#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ -#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ - -/* Bit masks for PIXC_RYCON */ - -#define A11 0x3ff /* A11 in the Coefficient Matrix */ -#define A12 0xffc00 /* A12 in the Coefficient Matrix */ -#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ -#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_GUCON */ - -#define A21 0x3ff /* A21 in the Coefficient Matrix */ -#define A22 0xffc00 /* A22 in the Coefficient Matrix */ -#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ -#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_BVCON */ - -#define A31 0x3ff /* A31 in the Coefficient Matrix */ -#define A32 0xffc00 /* A32 in the Coefficient Matrix */ -#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ -#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_CCBIAS */ - -#define A14 0x3ff /* A14 in the Bias Vector */ -#define A24 0xffc00 /* A24 in the Bias Vector */ -#define A34 0x3ff00000 /* A34 in the Bias Vector */ - -/* Bit masks for PIXC_TC */ - -#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ -#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ -#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ - -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - -/* Bit masks for KPAD_CTL */ - -#define KPAD_EN 0x1 /* Keypad Enable */ -#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ -#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ -#define KPAD_COLEN 0xe000 /* Column Enable Width */ - -/* Bit masks for KPAD_PRESCALE */ - -#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ - -/* Bit masks for KPAD_MSEL */ - -#define DBON_SCALE 0xff /* Debounce Scale Value */ -#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ - -/* Bit masks for KPAD_ROWCOL */ - -#define KPAD_ROW 0xff /* Rows Pressed */ -#define KPAD_COL 0xff00 /* Columns Pressed */ - -/* Bit masks for KPAD_STAT */ - -#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ -#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ -#define KPAD_PRESSED 0x8 /* Key press current status */ - -/* Bit masks for KPAD_SOFTEVAL */ - -#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - -/* Bit masks for ATAPI_CONTROL */ - -#define PIO_START 0x1 /* Start PIO/Reg Op */ -#define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define XFER_DIR 0x8 /* Transfer Direction */ -#define IORDY_EN 0x10 /* IORDY Enable */ -#define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define SOFT_RST 0x40 /* Soft Reset */ -#define DEV_RST 0x80 /* Device Reset */ -#define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define END_ON_TERM 0x200 /* End/Terminate Select */ -#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ - -/* Bit masks for ATAPI_STATUS */ - -#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ - -/* Bit masks for ATAPI_DEV_ADDR */ - -#define DEV_ADDR 0x1f /* Device Address */ - -/* Bit masks for ATAPI_INT_MASK */ - -#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ - -/* Bit masks for ATAPI_INT_STATUS */ - -#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ - -/* Bit masks for ATAPI_LINE_STATUS */ - -#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define ATAPI_ADDR 0x70 /* ATAPI address line status */ -#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_SM_STATE */ - -#define PIO_CSTATE 0xf /* PIO mode state machine current state */ -#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ -#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ -#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_TERMINATE */ - -#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ - -/* Bit masks for ATAPI_REG_TIM_0 */ - -#define T2_REG 0xff /* End of cycle time for register access transfers */ -#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ - -/* Bit masks for ATAPI_PIO_TIM_0 */ - -#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ -#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ -#define T4_REG 0xf000 /* DIOW data hold */ - -/* Bit masks for ATAPI_PIO_TIM_1 */ - -#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ - -/* Bit masks for ATAPI_MULTI_TIM_0 */ - -#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ -#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ - -/* Bit masks for ATAPI_MULTI_TIM_1 */ - -#define TKW 0xff /* Selects DIOW negated pulsewidth */ -#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ - -/* Bit masks for ATAPI_MULTI_TIM_2 */ - -#define TH 0xff /* Selects DIOW data hold */ -#define TEOC 0xff00 /* Selects end of cycle for DMA */ - -/* Bit masks for ATAPI_ULTRA_TIM_0 */ - -#define TACK 0xff /* Selects setup and hold times for TACK */ -#define TENV 0xff00 /* Selects envelope time */ - -/* Bit masks for ATAPI_ULTRA_TIM_1 */ - -#define TDVS 0xff /* Selects data valid setup time */ -#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ - -/* Bit masks for ATAPI_ULTRA_TIM_2 */ - -#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ -#define TMLI 0xff00 /* Selects interlock time */ - -/* Bit masks for ATAPI_ULTRA_TIM_3 */ - -#define TZAH 0xff /* Selects minimum delay required for output */ -#define READY_PAUSE 0xff00 /* Selects ready to pause */ - -/* Bit masks for TIMER_ENABLE1 */ - -#define TIMEN8 0x1 /* Timer 8 Enable */ -#define TIMEN9 0x2 /* Timer 9 Enable */ -#define TIMEN10 0x4 /* Timer 10 Enable */ - -/* Bit masks for TIMER_DISABLE1 */ - -#define TIMDIS8 0x1 /* Timer 8 Disable */ -#define TIMDIS9 0x2 /* Timer 9 Disable */ -#define TIMDIS10 0x4 /* Timer 10 Disable */ - -/* Bit masks for TIMER_STATUS1 */ - -#define TIMIL8 0x1 /* Timer 8 Interrupt */ -#define TIMIL9 0x2 /* Timer 9 Interrupt */ -#define TIMIL10 0x4 /* Timer 10 Interrupt */ -#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ -#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ -#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ -#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ -#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ -#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ - -/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ - -/* Bit masks for USB_FADDR */ - -#define FUNCTION_ADDRESS 0x7f /* Function address */ - -/* Bit masks for USB_POWER */ - -#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define RESUME_MODE 0x4 /* DMA Mode */ -#define RESET 0x8 /* Reset indicator */ -#define HS_MODE 0x10 /* High Speed mode indicator */ -#define HS_ENABLE 0x20 /* high Speed Enable */ -#define SOFT_CONN 0x40 /* Soft connect */ -#define ISO_UPDATE 0x80 /* Isochronous update */ - -/* Bit masks for USB_INTRTX */ - -#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRRX */ - -#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRTXE */ - -#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRRXE */ - -#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRUSB */ - -#define SUSPEND_B 0x1 /* Suspend indicator */ -#define RESUME_B 0x2 /* Resume indicator */ -#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define SOF_B 0x8 /* Start of frame */ -#define CONN_B 0x10 /* Connection indicator */ -#define DISCON_B 0x20 /* Disconnect indicator */ -#define SESSION_REQ_B 0x40 /* Session Request */ -#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ - -/* Bit masks for USB_INTRUSBE */ - -#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define RESUME_BE 0x2 /* Resume indicator int enable */ -#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define SOF_BE 0x8 /* Start of frame int enable */ -#define CONN_BE 0x10 /* Connection indicator int enable */ -#define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ - -/* Bit masks for USB_FRAME */ - -#define FRAME_NUMBER 0x7ff /* Frame number */ - -/* Bit masks for USB_INDEX */ - -#define SELECTED_ENDPOINT 0xf /* selected endpoint */ - -/* Bit masks for USB_GLOBAL_CTL */ - -#define GLOBAL_ENA 0x1 /* enables USB module */ -#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ - -/* Bit masks for USB_OTG_DEV_CTL */ - -#define SESSION 0x1 /* session indicator */ -#define HOST_REQ 0x2 /* Host negotiation request */ -#define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define VBUS0 0x8 /* Vbus level indicator[0] */ -#define VBUS1 0x10 /* Vbus level indicator[1] */ -#define LSDEV 0x20 /* Low-speed indicator */ -#define FSDEV 0x40 /* Full or High-speed indicator */ -#define B_DEVICE 0x80 /* A' or 'B' device indicator */ - -/* Bit masks for USB_OTG_VBUS_IRQ */ - -#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ - -/* Bit masks for USB_OTG_VBUS_MASK */ - -#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ - -/* Bit masks for USB_CSR0 */ - -#define RXPKTRDY 0x1 /* data packet receive indicator */ -#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define STALL_SENT 0x4 /* STALL handshake sent */ -#define DATAEND 0x8 /* Data end indicator */ -#define SETUPEND 0x10 /* Setup end */ -#define SENDSTALL 0x20 /* Send STALL handshake */ -#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define ERROR_H 0x10 /* timeout error indicator host mode */ -#define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ - -/* Bit masks for USB_COUNT0 */ - -#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ - -/* Bit masks for USB_NAKLIMIT0 */ - -#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ - -/* Bit masks for USB_TX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_RX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_TXCSR */ - -#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define ISO_T 0x4000 /* enable Isochronous transfers */ -#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_TH 0x4 /* error condition host mode */ -#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ - -/* Bit masks for USB_TXCOUNT */ - -#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* Bit masks for USB_RXCSR */ - -#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define ISO_R 0x4000 /* enable Isochronous transfers */ -#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ - -/* Bit masks for USB_RXCOUNT */ - -#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ - -/* Bit masks for USB_TXTYPE */ - -#define TARGET_EP_NO_T 0xf /* EP number */ -#define PROTOCOL_T 0xc /* transfer type */ - -/* Bit masks for USB_TXINTERVAL */ - -#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ - -/* Bit masks for USB_RXTYPE */ - -#define TARGET_EP_NO_R 0xf /* EP number */ -#define PROTOCOL_R 0xc /* transfer type */ - -/* Bit masks for USB_RXINTERVAL */ - -#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ - -/* Bit masks for USB_DMA_INTERRUPT */ - -#define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define DMA7_INT 0x80 /* DMA7 pending interrupt */ - -/* Bit masks for USB_DMAxCONTROL */ - -#define DMA_ENA 0x1 /* DMA enable */ -#define DIRECTION 0x2 /* direction of DMA transfer */ -#define MODE 0x4 /* DMA Bus error */ -#define INT_ENA 0x8 /* Interrupt enable */ -#define EPNUM 0xf0 /* EP number */ -#define BUSERROR 0x100 /* DMA Bus error */ - -/* Bit masks for USB_DMAxADDRHIGH */ - -#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxADDRLOW */ - -#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTHIGH */ - -#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTLOW */ - -#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for HMDMAx_CONTROL */ - -#define HMDMAEN 0x1 /* Handshake MDMA Enable */ -#define REP 0x2 /* Handshake MDMA Request Polarity */ -#define UTE 0x8 /* Urgency Threshold Enable */ -#define OIE 0x10 /* Overflow Interrupt Enable */ -#define BDIE 0x20 /* Block Done Interrupt Enable */ -#define MBDI 0x40 /* Mask Block Done Interrupt */ -#define DRQ 0x300 /* Handshake MDMA Request Type */ -#define RBC 0x1000 /* Force Reload of BCOUNT */ -#define PS 0x2000 /* Pin Status */ -#define OI 0x4000 /* Overflow Interrupt Generated */ -#define BDI 0x8000 /* Block Done Interrupt Generated */ - -/* ******************************************* */ -/* MULTI BIT MACRO ENUMERATIONS */ -/* ******************************************* */ - - #endif /* _DEF_BF548_H */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/defBF549.h b/trunk/arch/blackfin/mach-bf548/include/mach/defBF549.h index f7f043560c6f..5a04e6d4017e 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/defBF549.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -10,121 +10,13 @@ /* Include all Core registers and bit definitions */ #include - /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ #include "defBF54x_base.h" -/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ - -/* Timer Registers */ - -#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ -#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ -#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ -#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ -#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ -#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ -#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ -#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ -#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ -#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ -#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ -#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ - -/* Timer Group of 3 Registers */ - -#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ -#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ -#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ - -/* SPORT0 Registers */ - -#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ -#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ -#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ -#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ -#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ -#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ -#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ -#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ - -/* EPPI0 Registers */ - -#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ -#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ -#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ -#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ -#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ -#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ -#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ -#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ -#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ -#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ -#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ -#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ -#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ -#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ - -/* UART2 Registers */ - -#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ -#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ -#define UART2_GCTL 0xffc02108 /* Global Control Register */ -#define UART2_LCR 0xffc0210c /* Line Control Register */ -#define UART2_MCR 0xffc02110 /* Modem Control Register */ -#define UART2_LSR 0xffc02114 /* Line Status Register */ -#define UART2_MSR 0xffc02118 /* Modem Status Register */ -#define UART2_SCR 0xffc0211c /* Scratch Register */ -#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ -#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ -#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ - -/* Two Wire Interface Registers (TWI1) */ - -#define TWI1_REGBASE 0xffc02200 -#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ -#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ -#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ -#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ -#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ -#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ -#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ -#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ -#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ -#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ -#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ -#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ -#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ - -/* SPI2 Registers */ - -#define SPI2_REGBASE 0xffc02400 -#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ -#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ -#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ -#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ -#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ -#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ -#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ +/* The BF549 is like the BF544, but has MXVR */ +#include "defBF547.h" /* MXVR Registers */ @@ -296,2418 +188,4 @@ #define MXVR_PIN_CTL 0xffc028dc /* MXVR Pin Control Register */ #define MXVR_SCLK_CNT 0xffc028e0 /* MXVR System Clock Counter Register */ -/* CAN Controller 1 Config 1 Registers */ - -#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ -#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ -#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ -#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ -#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ -#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ -#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ -#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ -#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ -#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ -#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ -#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ -#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ - -/* CAN Controller 1 Config 2 Registers */ - -#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ -#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ -#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ -#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ -#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ -#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ -#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ -#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ -#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ -#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ -#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ -#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ -#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ - -/* CAN Controller 1 Clock/Interrupt/Counter Registers */ - -#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ -#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ -#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ -#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ -#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ -#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ -#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ -#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ -#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ -#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ -#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ -#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ -#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ -#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ -#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ -#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ - -/* CAN Controller 1 Mailbox Acceptance Registers */ - -#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ -#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ -#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ -#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ -#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ -#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ -#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ -#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ -#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ -#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ -#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ -#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ -#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ -#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ -#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ -#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ -#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ -#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ -#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ -#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ -#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ -#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ -#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ -#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ -#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ -#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ -#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ -#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ -#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ -#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ -#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ -#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ - -/* CAN Controller 1 Mailbox Acceptance Registers */ - -#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ -#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ -#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ -#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ -#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ -#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ -#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ -#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ -#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ -#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ -#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ -#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ -#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ -#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ -#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ -#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ -#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ -#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ -#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ -#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ -#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ -#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ -#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ -#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ -#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ -#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ -#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ -#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ -#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ -#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ -#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ -#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ - -/* CAN Controller 1 Mailbox Data Registers */ - -#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ -#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ -#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ -#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ -#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ -#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ -#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ -#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ -#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ -#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ -#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ -#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ -#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ -#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ -#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ -#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ -#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ -#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ -#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ -#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ -#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ -#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ -#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ -#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ -#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ -#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ -#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ -#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ -#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ -#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ -#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ -#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ -#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ -#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ -#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ -#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ -#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ -#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ -#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ -#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ -#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ -#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ -#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ -#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ -#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ -#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ -#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ -#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ -#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ -#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ -#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ -#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ -#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ -#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ -#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ -#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ -#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ -#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ -#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ -#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ -#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ -#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ -#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ -#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ -#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ -#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ -#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ -#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ -#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ -#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ -#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ -#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ -#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ -#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ -#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ -#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ -#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ -#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ -#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ -#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ -#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ -#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ -#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ -#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ -#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ -#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ -#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ -#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ -#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ -#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ -#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ -#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ -#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ -#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ -#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ -#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ -#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ -#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ -#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ -#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ -#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ -#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ -#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ -#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ -#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ -#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ -#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ -#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ -#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ -#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ -#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ -#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ -#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ -#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ -#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ -#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ -#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ -#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ -#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ -#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ -#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ -#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ -#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ -#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ -#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ -#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ -#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ -#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ - -/* CAN Controller 1 Mailbox Data Registers */ - -#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ -#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ -#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ -#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ -#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ -#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ -#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ -#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ -#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ -#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ -#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ -#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ -#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ -#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ -#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ -#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ -#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ -#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ -#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ -#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ -#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ -#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ -#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ -#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ -#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ -#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ -#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ -#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ -#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ -#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ -#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ -#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ -#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ -#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ -#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ -#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ -#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ -#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ -#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ -#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ -#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ -#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ -#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ -#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ -#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ -#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ -#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ -#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ -#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ -#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ -#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ -#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ -#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ -#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ -#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ -#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ -#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ -#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ -#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ -#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ -#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ -#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ -#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ -#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ -#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ -#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ -#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ -#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ -#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ -#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ -#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ -#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ -#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ -#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ -#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ -#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ -#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ -#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ -#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ -#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ -#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ -#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ -#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ -#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ -#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ -#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ -#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ -#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ -#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ -#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ -#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ -#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ -#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ -#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ -#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ -#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ -#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ -#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ -#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ -#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ -#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ -#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ -#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ -#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ -#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ -#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ -#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ -#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ -#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ -#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ -#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ -#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ -#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ -#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ -#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ -#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ -#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ -#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ -#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ -#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ -#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ -#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ -#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ -#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ -#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ -#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ -#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ -#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ - -/* ATAPI Registers */ - -#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ -#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ -#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ -#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ -#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ -#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ -#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ -#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ -#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ -#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ -#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ -#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ -#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ -#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ -#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ -#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ -#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ -#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ -#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ -#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ -#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ -#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ -#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ -#define SDH_COMMAND 0xffc0390c /* SDH Command */ -#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ -#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ -#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ -#define SDH_STATUS 0xffc03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ -#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ -#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ -#define SDH_CFG 0xffc039c8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ -#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ - -/* HOST Port Registers */ - -#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ -#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ -#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ - -/* USB Control Registers */ - -#define USB_FADDR 0xffc03c00 /* Function address register */ -#define USB_POWER 0xffc03c04 /* Power management register */ -#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ -#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ -#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ -#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ -#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ -#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ -#define USB_FRAME 0xffc03c20 /* USB frame number */ -#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ -#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ -#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ -#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ - -/* USB Packet Control Registers */ - -#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ -#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ -#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ -#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ -#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ -#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ -#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* USB Endpoint FIFO Registers */ - -#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ -#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ -#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ -#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ -#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ -#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ -#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ -#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ - -/* USB OTG Control Registers */ - -#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ -#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ -#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ - -/* USB Phy Control Registers */ - -#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ -#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ -#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ -#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ -#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ - -/* (APHY_CNTRL is for ADI usage only) */ - -#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ - -/* (APHY_CALIB is for ADI usage only) */ - -#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ -#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ - -/* (PHY_TEST is for ADI usage only) */ - -#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ -#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ -#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ - -/* USB Endpoint 0 Control Registers */ - -#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ -#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ -#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ -#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ -#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ -#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ -#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ - -/* USB Endpoint 1 Control Registers */ - -#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ -#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ -#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ -#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ -#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ -#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ -#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ -#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ - -/* USB Endpoint 2 Control Registers */ - -#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ -#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ -#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ -#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ -#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ -#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ -#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ -#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ - -/* USB Endpoint 3 Control Registers */ - -#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ -#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ -#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ -#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ -#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ -#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ -#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ -#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ - -/* USB Endpoint 4 Control Registers */ - -#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ -#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ -#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ -#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ -#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ -#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ -#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ -#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ - -/* USB Endpoint 5 Control Registers */ - -#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ -#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ -#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ -#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ -#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ -#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ -#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ -#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ - -/* USB Endpoint 6 Control Registers */ - -#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ -#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ -#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ -#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ -#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ -#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ -#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ -#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ - -/* USB Endpoint 7 Control Registers */ - -#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ -#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ -#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ -#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ -#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ -#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ -#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ -#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ - -/* USB Channel 0 Config Registers */ - -#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ -#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ - -/* USB Channel 1 Config Registers */ - -#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ -#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ - -/* USB Channel 2 Config Registers */ - -#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ -#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ - -/* USB Channel 3 Config Registers */ - -#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ -#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ - -/* USB Channel 4 Config Registers */ - -#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ -#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ - -/* USB Channel 5 Config Registers */ - -#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ -#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ - -/* USB Channel 6 Config Registers */ - -#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ -#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ - -/* USB Channel 7 Config Registers */ - -#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ -#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ -#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ - -/* Keypad Registers */ - -#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ -#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ -#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ -#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ -#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ -#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ - -/* Pixel Compositor (PIXC) Registers */ - -#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ -#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ -#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ -#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ -#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ -#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ -#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ -#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ -#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ -#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ -#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ -#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ -#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ -#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ -#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ -#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ -#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ -#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ -#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ - -/* Handshake MDMA 0 Registers */ - -#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ -#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ -#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ -#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ -#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ -#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ - -/* Handshake MDMA 1 Registers */ - -#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ -#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ -#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ -#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ -#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ -#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ - - -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for PIXC_CTL */ - -#define PIXC_EN 0x1 /* Pixel Compositor Enable */ -#define OVR_A_EN 0x2 /* Overlay A Enable */ -#define OVR_B_EN 0x4 /* Overlay B Enable */ -#define IMG_FORM 0x8 /* Image Data Format */ -#define OVR_FORM 0x10 /* Overlay Data Format */ -#define OUT_FORM 0x20 /* Output Data Format */ -#define UDS_MOD 0x40 /* Resampling Mode */ -#define TC_EN 0x80 /* Transparent Color Enable */ -#define IMG_STAT 0x300 /* Image FIFO Status */ -#define OVR_STAT 0xc00 /* Overlay FIFO Status */ -#define WM_LVL 0x3000 /* FIFO Watermark Level */ - -/* Bit masks for PIXC_AHSTART */ - -#define A_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_AHEND */ - -#define A_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_AVSTART */ - -#define A_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_AVEND */ - -#define A_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_ATRANSP */ - -#define A_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_BHSTART */ - -#define B_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_BHEND */ - -#define B_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_BVSTART */ - -#define B_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_BVEND */ - -#define B_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_BTRANSP */ - -#define B_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_INTRSTAT */ - -#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ -#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ -#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ -#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ - -/* Bit masks for PIXC_RYCON */ - -#define A11 0x3ff /* A11 in the Coefficient Matrix */ -#define A12 0xffc00 /* A12 in the Coefficient Matrix */ -#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ -#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_GUCON */ - -#define A21 0x3ff /* A21 in the Coefficient Matrix */ -#define A22 0xffc00 /* A22 in the Coefficient Matrix */ -#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ -#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_BVCON */ - -#define A31 0x3ff /* A31 in the Coefficient Matrix */ -#define A32 0xffc00 /* A32 in the Coefficient Matrix */ -#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ -#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_CCBIAS */ - -#define A14 0x3ff /* A14 in the Bias Vector */ -#define A24 0xffc00 /* A24 in the Bias Vector */ -#define A34 0x3ff00000 /* A34 in the Bias Vector */ - -/* Bit masks for PIXC_TC */ - -#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ -#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ -#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ - -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define TIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - -/* Bit masks for MXVR_CONFIG */ - -#define MXVREN 0x1 /* MXVR Enable */ -#define MMSM 0x2 /* MXVR Master/Slave Mode Select */ -#define ACTIVE 0x4 /* Active Mode */ -#define SDELAY 0x8 /* Synchronous Data Delay */ -#define NCMRXEN 0x10 /* Normal Control Message Receive Enable */ -#define RWRRXEN 0x20 /* Remote Write Receive Enable */ -#define MTXEN 0x40 /* MXVR Transmit Data Enable */ -#define MTXONB 0x80 /* MXVR Phy Transmitter On */ -#define EPARITY 0x100 /* Even Parity Select */ -#define MSB 0x1e00 /* Master Synchronous Boundary */ -#define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */ -#define WAKEUP 0x4000 /* Wake-Up */ -#define LMECH 0x8000 /* Lock Mechanism Select */ - -/* Bit masks for MXVR_STATE_0 */ - -#define NACT 0x1 /* Network Activity */ -#define SBLOCK 0x2 /* Super Block Lock */ -#define FMPLLST 0xc /* Frequency Multiply PLL SM State */ -#define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */ -#define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */ -#define APARB 0x200 /* Asynchronous Packet Arbitrating */ -#define APTX 0x400 /* Asynchronous Packet Transmitting */ -#define APRX 0x800 /* Receiving Asynchronous Packet */ -#define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */ -#define CMARB 0x2000 /* Control Message Arbitrating */ -#define CMTX 0x4000 /* Control Message Transmitting */ -#define CMRX 0x8000 /* Receiving Control Message */ -#define MRXONB 0x10000 /* MRXONB Pin State */ -#define RGSIP 0x20000 /* Remote Get Source In Progress */ -#define DALIP 0x40000 /* Resource Deallocate In Progress */ -#define ALIP 0x80000 /* Resource Allocate In Progress */ -#define RRDIP 0x100000 /* Remote Read In Progress */ -#define RWRIP 0x200000 /* Remote Write In Progress */ -#define FLOCK 0x400000 /* Frame Lock */ -#define BLOCK 0x800000 /* Block Lock */ -#define RSB 0xf000000 /* Received Synchronous Boundary */ -#define DERRNUM 0xf0000000 /* DMA Error Channel Number */ - -/* Bit masks for MXVR_STATE_1 */ - -#define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */ -#define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */ -#define APCONT 0x100 /* Asynchronous Packet Continuation */ -#define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */ -#define DMAACTIVE0 0x10000 /* DMA0 Active */ -#define DMAACTIVE1 0x20000 /* DMA1 Active */ -#define DMAACTIVE2 0x40000 /* DMA2 Active */ -#define DMAACTIVE3 0x80000 /* DMA3 Active */ -#define DMAACTIVE4 0x100000 /* DMA4 Active */ -#define DMAACTIVE5 0x200000 /* DMA5 Active */ -#define DMAACTIVE6 0x400000 /* DMA6 Active */ -#define DMAACTIVE7 0x800000 /* DMA7 Active */ -#define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */ -#define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */ -#define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */ -#define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */ -#define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */ -#define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */ -#define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */ -#define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */ - -/* Bit masks for MXVR_INT_STAT_0 */ - -#define NI2A 0x1 /* Network Inactive to Active */ -#define NA2I 0x2 /* Network Active to Inactive */ -#define SBU2L 0x4 /* Super Block Unlock to Lock */ -#define SBL2U 0x8 /* Super Block Lock to Unlock */ -#define PRU 0x10 /* Position Register Updated */ -#define MPRU 0x20 /* Maximum Position Register Updated */ -#define DRU 0x40 /* Delay Register Updated */ -#define MDRU 0x80 /* Maximum Delay Register Updated */ -#define SBU 0x100 /* Synchronous Boundary Updated */ -#define ATU 0x200 /* Allocation Table Updated */ -#define FCZ0 0x400 /* Frame Counter 0 Zero */ -#define FCZ1 0x800 /* Frame Counter 1 Zero */ -#define PERR 0x1000 /* Parity Error */ -#define MH2L 0x2000 /* MRXONB High to Low */ -#define ML2H 0x4000 /* MRXONB Low to High */ -#define WUP 0x8000 /* Wake-Up Preamble Received */ -#define FU2L 0x10000 /* Frame Unlock to Lock */ -#define FL2U 0x20000 /* Frame Lock to Unlock */ -#define BU2L 0x40000 /* Block Unlock to Lock */ -#define BL2U 0x80000 /* Block Lock to Unlock */ -#define OBERR 0x100000 /* DMA Out of Bounds Error */ -#define PFL 0x200000 /* PLL Frequency Locked */ -#define SCZ 0x400000 /* System Clock Counter Zero */ -#define FERR 0x800000 /* FIFO Error */ -#define CMR 0x1000000 /* Control Message Received */ -#define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */ -#define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */ -#define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */ -#define RWRC 0x10000000 /* Remote Write Control Message Completed */ -#define BCZ 0x20000000 /* Block Counter Zero */ -#define BMERR 0x40000000 /* Biphase Mark Coding Error */ -#define DERR 0x80000000 /* DMA Error */ - -/* Bit masks for MXVR_INT_STAT_1 */ - -#define HDONE0 0x1 /* DMA0 Half Done */ -#define DONE0 0x2 /* DMA0 Done */ -#define APR 0x4 /* Asynchronous Packet Received */ -#define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */ -#define HDONE1 0x10 /* DMA1 Half Done */ -#define DONE1 0x20 /* DMA1 Done */ -#define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */ -#define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */ -#define HDONE2 0x100 /* DMA2 Half Done */ -#define DONE2 0x200 /* DMA2 Done */ -#define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */ -#define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */ -#define HDONE3 0x1000 /* DMA3 Half Done */ -#define DONE3 0x2000 /* DMA3 Done */ -#define HDONE4 0x10000 /* DMA4 Half Done */ -#define DONE4 0x20000 /* DMA4 Done */ -#define HDONE5 0x100000 /* DMA5 Half Done */ -#define DONE5 0x200000 /* DMA5 Done */ -#define HDONE6 0x1000000 /* DMA6 Half Done */ -#define DONE6 0x2000000 /* DMA6 Done */ -#define HDONE7 0x10000000 /* DMA7 Half Done */ -#define DONE7 0x20000000 /* DMA7 Done */ - -/* Bit masks for MXVR_INT_EN_0 */ - -#define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */ -#define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */ -#define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */ -#define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */ -#define PRUEN 0x10 /* Position Register Updated Interrupt Enable */ -#define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */ -#define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */ -#define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */ -#define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */ -#define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */ -#define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */ -#define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */ -#define PERREN 0x1000 /* Parity Error Interrupt Enable */ -#define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */ -#define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */ -#define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */ -#define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */ -#define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */ -#define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */ -#define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */ -#define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */ -#define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */ -#define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */ -#define FERREN 0x800000 /* FIFO Error Interrupt Enable */ -#define CMREN 0x1000000 /* Control Message Received Interrupt Enable */ -#define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */ -#define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */ -#define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */ -#define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */ -#define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */ -#define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */ -#define DERREN 0x80000000 /* DMA Error Interrupt Enable */ - -/* Bit masks for MXVR_INT_EN_1 */ - -#define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */ -#define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */ -#define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */ -#define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */ -#define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */ -#define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */ -#define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */ -#define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */ -#define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */ -#define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */ -#define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */ -#define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */ -#define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */ -#define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */ -#define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */ -#define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */ -#define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */ -#define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */ -#define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */ -#define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */ -#define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */ -#define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */ - -/* Bit masks for MXVR_POSITION */ - -#define POSITION 0x3f /* Node Position */ -#define PVALID 0x8000 /* Node Position Valid */ - -/* Bit masks for MXVR_MAX_POSITION */ - -#define MPOSITION 0x3f /* Maximum Node Position */ -#define MPVALID 0x8000 /* Maximum Node Position Valid */ - -/* Bit masks for MXVR_DELAY */ - -#define DELAY 0x3f /* Node Frame Delay */ -#define DVALID 0x8000 /* Node Frame Delay Valid */ - -/* Bit masks for MXVR_MAX_DELAY */ - -#define MDELAY 0x3f /* Maximum Node Frame Delay */ -#define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */ - -/* Bit masks for MXVR_LADDR */ - -#define LADDR 0xffff /* Logical Address */ -#define LVALID 0x80000000 /* Logical Address Valid */ - -/* Bit masks for MXVR_GADDR */ - -#define GADDRL 0xff /* Group Address Lower Byte */ -#define GVALID 0x8000 /* Group Address Valid */ - -/* Bit masks for MXVR_AADDR */ - -#define AADDR 0xffff /* Alternate Address */ -#define AVALID 0x80000000 /* Alternate Address Valid */ - -/* Bit masks for MXVR_ALLOC_0 */ - -#define CL0 0x7f /* Channel 0 Connection Label */ -#define CIU0 0x80 /* Channel 0 In Use */ -#define CL1 0x7f00 /* Channel 0 Connection Label */ -#define CIU1 0x8000 /* Channel 0 In Use */ -#define CL2 0x7f0000 /* Channel 0 Connection Label */ -#define CIU2 0x800000 /* Channel 0 In Use */ -#define CL3 0x7f000000 /* Channel 0 Connection Label */ -#define CIU3 0x80000000 /* Channel 0 In Use */ - -/* Bit masks for MXVR_ALLOC_1 */ - -#define CL4 0x7f /* Channel 4 Connection Label */ -#define CIU4 0x80 /* Channel 4 In Use */ -#define CL5 0x7f00 /* Channel 5 Connection Label */ -#define CIU5 0x8000 /* Channel 5 In Use */ -#define CL6 0x7f0000 /* Channel 6 Connection Label */ -#define CIU6 0x800000 /* Channel 6 In Use */ -#define CL7 0x7f000000 /* Channel 7 Connection Label */ -#define CIU7 0x80000000 /* Channel 7 In Use */ - -/* Bit masks for MXVR_ALLOC_2 */ - -#define CL8 0x7f /* Channel 8 Connection Label */ -#define CIU8 0x80 /* Channel 8 In Use */ -#define CL9 0x7f00 /* Channel 9 Connection Label */ -#define CIU9 0x8000 /* Channel 9 In Use */ -#define CL10 0x7f0000 /* Channel 10 Connection Label */ -#define CIU10 0x800000 /* Channel 10 In Use */ -#define CL11 0x7f000000 /* Channel 11 Connection Label */ -#define CIU11 0x80000000 /* Channel 11 In Use */ - -/* Bit masks for MXVR_ALLOC_3 */ - -#define CL12 0x7f /* Channel 12 Connection Label */ -#define CIU12 0x80 /* Channel 12 In Use */ -#define CL13 0x7f00 /* Channel 13 Connection Label */ -#define CIU13 0x8000 /* Channel 13 In Use */ -#define CL14 0x7f0000 /* Channel 14 Connection Label */ -#define CIU14 0x800000 /* Channel 14 In Use */ -#define CL15 0x7f000000 /* Channel 15 Connection Label */ -#define CIU15 0x80000000 /* Channel 15 In Use */ - -/* Bit masks for MXVR_ALLOC_4 */ - -#define CL16 0x7f /* Channel 16 Connection Label */ -#define CIU16 0x80 /* Channel 16 In Use */ -#define CL17 0x7f00 /* Channel 17 Connection Label */ -#define CIU17 0x8000 /* Channel 17 In Use */ -#define CL18 0x7f0000 /* Channel 18 Connection Label */ -#define CIU18 0x800000 /* Channel 18 In Use */ -#define CL19 0x7f000000 /* Channel 19 Connection Label */ -#define CIU19 0x80000000 /* Channel 19 In Use */ - -/* Bit masks for MXVR_ALLOC_5 */ - -#define CL20 0x7f /* Channel 20 Connection Label */ -#define CIU20 0x80 /* Channel 20 In Use */ -#define CL21 0x7f00 /* Channel 21 Connection Label */ -#define CIU21 0x8000 /* Channel 21 In Use */ -#define CL22 0x7f0000 /* Channel 22 Connection Label */ -#define CIU22 0x800000 /* Channel 22 In Use */ -#define CL23 0x7f000000 /* Channel 23 Connection Label */ -#define CIU23 0x80000000 /* Channel 23 In Use */ - -/* Bit masks for MXVR_ALLOC_6 */ - -#define CL24 0x7f /* Channel 24 Connection Label */ -#define CIU24 0x80 /* Channel 24 In Use */ -#define CL25 0x7f00 /* Channel 25 Connection Label */ -#define CIU25 0x8000 /* Channel 25 In Use */ -#define CL26 0x7f0000 /* Channel 26 Connection Label */ -#define CIU26 0x800000 /* Channel 26 In Use */ -#define CL27 0x7f000000 /* Channel 27 Connection Label */ -#define CIU27 0x80000000 /* Channel 27 In Use */ - -/* Bit masks for MXVR_ALLOC_7 */ - -#define CL28 0x7f /* Channel 28 Connection Label */ -#define CIU28 0x80 /* Channel 28 In Use */ -#define CL29 0x7f00 /* Channel 29 Connection Label */ -#define CIU29 0x8000 /* Channel 29 In Use */ -#define CL30 0x7f0000 /* Channel 30 Connection Label */ -#define CIU30 0x800000 /* Channel 30 In Use */ -#define CL31 0x7f000000 /* Channel 31 Connection Label */ -#define CIU31 0x80000000 /* Channel 31 In Use */ - -/* Bit masks for MXVR_ALLOC_8 */ - -#define CL32 0x7f /* Channel 32 Connection Label */ -#define CIU32 0x80 /* Channel 32 In Use */ -#define CL33 0x7f00 /* Channel 33 Connection Label */ -#define CIU33 0x8000 /* Channel 33 In Use */ -#define CL34 0x7f0000 /* Channel 34 Connection Label */ -#define CIU34 0x800000 /* Channel 34 In Use */ -#define CL35 0x7f000000 /* Channel 35 Connection Label */ -#define CIU35 0x80000000 /* Channel 35 In Use */ - -/* Bit masks for MXVR_ALLOC_9 */ - -#define CL36 0x7f /* Channel 36 Connection Label */ -#define CIU36 0x80 /* Channel 36 In Use */ -#define CL37 0x7f00 /* Channel 37 Connection Label */ -#define CIU37 0x8000 /* Channel 37 In Use */ -#define CL38 0x7f0000 /* Channel 38 Connection Label */ -#define CIU38 0x800000 /* Channel 38 In Use */ -#define CL39 0x7f000000 /* Channel 39 Connection Label */ -#define CIU39 0x80000000 /* Channel 39 In Use */ - -/* Bit masks for MXVR_ALLOC_10 */ - -#define CL40 0x7f /* Channel 40 Connection Label */ -#define CIU40 0x80 /* Channel 40 In Use */ -#define CL41 0x7f00 /* Channel 41 Connection Label */ -#define CIU41 0x8000 /* Channel 41 In Use */ -#define CL42 0x7f0000 /* Channel 42 Connection Label */ -#define CIU42 0x800000 /* Channel 42 In Use */ -#define CL43 0x7f000000 /* Channel 43 Connection Label */ -#define CIU43 0x80000000 /* Channel 43 In Use */ - -/* Bit masks for MXVR_ALLOC_11 */ - -#define CL44 0x7f /* Channel 44 Connection Label */ -#define CIU44 0x80 /* Channel 44 In Use */ -#define CL45 0x7f00 /* Channel 45 Connection Label */ -#define CIU45 0x8000 /* Channel 45 In Use */ -#define CL46 0x7f0000 /* Channel 46 Connection Label */ -#define CIU46 0x800000 /* Channel 46 In Use */ -#define CL47 0x7f000000 /* Channel 47 Connection Label */ -#define CIU47 0x80000000 /* Channel 47 In Use */ - -/* Bit masks for MXVR_ALLOC_12 */ - -#define CL48 0x7f /* Channel 48 Connection Label */ -#define CIU48 0x80 /* Channel 48 In Use */ -#define CL49 0x7f00 /* Channel 49 Connection Label */ -#define CIU49 0x8000 /* Channel 49 In Use */ -#define CL50 0x7f0000 /* Channel 50 Connection Label */ -#define CIU50 0x800000 /* Channel 50 In Use */ -#define CL51 0x7f000000 /* Channel 51 Connection Label */ -#define CIU51 0x80000000 /* Channel 51 In Use */ - -/* Bit masks for MXVR_ALLOC_13 */ - -#define CL52 0x7f /* Channel 52 Connection Label */ -#define CIU52 0x80 /* Channel 52 In Use */ -#define CL53 0x7f00 /* Channel 53 Connection Label */ -#define CIU53 0x8000 /* Channel 53 In Use */ -#define CL54 0x7f0000 /* Channel 54 Connection Label */ -#define CIU54 0x800000 /* Channel 54 In Use */ -#define CL55 0x7f000000 /* Channel 55 Connection Label */ -#define CIU55 0x80000000 /* Channel 55 In Use */ - -/* Bit masks for MXVR_ALLOC_14 */ - -#define CL56 0x7f /* Channel 56 Connection Label */ -#define CIU56 0x80 /* Channel 56 In Use */ -#define CL57 0x7f00 /* Channel 57 Connection Label */ -#define CIU57 0x8000 /* Channel 57 In Use */ -#define CL58 0x7f0000 /* Channel 58 Connection Label */ -#define CIU58 0x800000 /* Channel 58 In Use */ -#define CL59 0x7f000000 /* Channel 59 Connection Label */ -#define CIU59 0x80000000 /* Channel 59 In Use */ - -/* MXVR_SYNC_LCHAN_0 Masks */ - -#define LCHANPC0 0x0000000Flu -#define LCHANPC1 0x000000F0lu -#define LCHANPC2 0x00000F00lu -#define LCHANPC3 0x0000F000lu -#define LCHANPC4 0x000F0000lu -#define LCHANPC5 0x00F00000lu -#define LCHANPC6 0x0F000000lu -#define LCHANPC7 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_1 Masks */ - -#define LCHANPC8 0x0000000Flu -#define LCHANPC9 0x000000F0lu -#define LCHANPC10 0x00000F00lu -#define LCHANPC11 0x0000F000lu -#define LCHANPC12 0x000F0000lu -#define LCHANPC13 0x00F00000lu -#define LCHANPC14 0x0F000000lu -#define LCHANPC15 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_2 Masks */ - -#define LCHANPC16 0x0000000Flu -#define LCHANPC17 0x000000F0lu -#define LCHANPC18 0x00000F00lu -#define LCHANPC19 0x0000F000lu -#define LCHANPC20 0x000F0000lu -#define LCHANPC21 0x00F00000lu -#define LCHANPC22 0x0F000000lu -#define LCHANPC23 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_3 Masks */ - -#define LCHANPC24 0x0000000Flu -#define LCHANPC25 0x000000F0lu -#define LCHANPC26 0x00000F00lu -#define LCHANPC27 0x0000F000lu -#define LCHANPC28 0x000F0000lu -#define LCHANPC29 0x00F00000lu -#define LCHANPC30 0x0F000000lu -#define LCHANPC31 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_4 Masks */ - -#define LCHANPC32 0x0000000Flu -#define LCHANPC33 0x000000F0lu -#define LCHANPC34 0x00000F00lu -#define LCHANPC35 0x0000F000lu -#define LCHANPC36 0x000F0000lu -#define LCHANPC37 0x00F00000lu -#define LCHANPC38 0x0F000000lu -#define LCHANPC39 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_5 Masks */ - -#define LCHANPC40 0x0000000Flu -#define LCHANPC41 0x000000F0lu -#define LCHANPC42 0x00000F00lu -#define LCHANPC43 0x0000F000lu -#define LCHANPC44 0x000F0000lu -#define LCHANPC45 0x00F00000lu -#define LCHANPC46 0x0F000000lu -#define LCHANPC47 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_6 Masks */ - -#define LCHANPC48 0x0000000Flu -#define LCHANPC49 0x000000F0lu -#define LCHANPC50 0x00000F00lu -#define LCHANPC51 0x0000F000lu -#define LCHANPC52 0x000F0000lu -#define LCHANPC53 0x00F00000lu -#define LCHANPC54 0x0F000000lu -#define LCHANPC55 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_7 Masks */ - -#define LCHANPC56 0x0000000Flu -#define LCHANPC57 0x000000F0lu -#define LCHANPC58 0x00000F00lu -#define LCHANPC59 0x0000F000lu - -/* Bit masks for MXVR_DMAx_CONFIG */ - -#define MDMAEN 0x1 /* DMA Channel Enable */ -#define DMADD 0x2 /* DMA Channel Direction */ -#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */ -#define LCHAN 0x3c0 /* DMA Channel Logical Channel */ -#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */ -#define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */ -#define MFLOW 0x7000 /* DMA Channel Operation Flow */ -#define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */ -#define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */ -#define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */ -#define COUNTPOS 0x1c000000 /* DMA Channel Count Position */ - -/* Bit masks for MXVR_AP_CTL */ - -#define STARTAP 0x1 /* Start Asynchronous Packet Transmission */ -#define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */ -#define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */ -#define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */ -#define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */ - -/* Bit masks for MXVR_APRB_START_ADDR */ - -#define MXVR_APRB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */ - -/* Bit masks for MXVR_APRB_CURR_ADDR */ - -#define MXVR_APRB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */ - -/* Bit masks for MXVR_APTB_START_ADDR */ - -#define MXVR_APTB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */ - -/* Bit masks for MXVR_APTB_CURR_ADDR */ - -#define MXVR_APTB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */ - -/* Bit masks for MXVR_CM_CTL */ - -#define STARTCM 0x1 /* Start Control Message Transmission */ -#define CANCELCM 0x2 /* Cancel Control Message Transmission */ -#define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */ -#define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */ -#define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */ -#define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */ -#define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */ -#define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */ -#define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */ -#define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */ -#define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */ -#define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */ -#define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */ -#define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */ -#define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */ -#define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */ -#define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */ -#define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */ - -/* Bit masks for MXVR_CMRB_START_ADDR */ - -#define MXVR_CMRB_START_ADDR_MASK 0x1fffffe /* Control Message Receive Buffer Start Address */ - -/* Bit masks for MXVR_CMRB_CURR_ADDR */ - -#define MXVR_CMRB_CURR_ADDR_MASK 0xffffffff /* Control Message Receive Buffer Current Address */ - -/* Bit masks for MXVR_CMTB_START_ADDR */ - -#define MXVR_CMTB_START_ADDR_MASK 0x1fffffe /* Control Message Transmit Buffer Start Address */ - -/* Bit masks for MXVR_CMTB_CURR_ADDR */ - -#define MXVR_CMTB_CURR_ADDR_MASK 0xffffffff /* Control Message Transmit Buffer Current Address */ - -/* Bit masks for MXVR_RRDB_START_ADDR */ - -#define MXVR_RRDB_START_ADDR_MASK 0x1fffffe /* Remote Read Buffer Start Address */ - -/* Bit masks for MXVR_RRDB_CURR_ADDR */ - -#define MXVR_RRDB_CURR_ADDR_MASK 0xffffffff /* Remote Read Buffer Current Address */ - -/* Bit masks for MXVR_PAT_DATAx */ - -#define MATCH_DATA_0 0xff /* Pattern Match Data Byte 0 */ -#define MATCH_DATA_1 0xff00 /* Pattern Match Data Byte 1 */ -#define MATCH_DATA_2 0xff0000 /* Pattern Match Data Byte 2 */ -#define MATCH_DATA_3 0xff000000 /* Pattern Match Data Byte 3 */ - -/* Bit masks for MXVR_PAT_EN_0 */ - -#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ -#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ -#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ -#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ -#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ -#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ -#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ -#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ -#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ -#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ -#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ -#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ -#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ -#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ -#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ -#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ -#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ -#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ -#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ -#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ -#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ -#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ -#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ -#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ -#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ -#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ -#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ -#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ -#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ -#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ -#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ -#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ - -/* Bit masks for MXVR_PAT_EN_1 */ - -#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ -#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ -#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ -#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ -#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ -#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ -#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ -#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ -#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ -#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ -#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ -#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ -#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ -#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ -#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ -#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ -#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ -#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ -#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ -#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ -#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ -#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ -#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ -#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ -#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ -#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ -#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ -#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ -#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ -#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ -#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ -#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ - -/* Bit masks for MXVR_FRAME_CNT_0 */ - -#define FCNT 0xffff /* Frame Count */ - -/* Bit masks for MXVR_FRAME_CNT_1 */ - -#define FCNT 0xffff /* Frame Count */ - -/* Bit masks for MXVR_ROUTING_0 */ - -#define TX_CH0 0x3f /* Transmit Channel 0 */ -#define MUTE_CH0 0x80 /* Mute Channel 0 */ -#define TX_CH1 0x3f00 /* Transmit Channel 0 */ -#define MUTE_CH1 0x8000 /* Mute Channel 0 */ -#define TX_CH2 0x3f0000 /* Transmit Channel 0 */ -#define MUTE_CH2 0x800000 /* Mute Channel 0 */ -#define TX_CH3 0x3f000000 /* Transmit Channel 0 */ -#define MUTE_CH3 0x80000000 /* Mute Channel 0 */ - -/* Bit masks for MXVR_ROUTING_1 */ - -#define TX_CH4 0x3f /* Transmit Channel 4 */ -#define MUTE_CH4 0x80 /* Mute Channel 4 */ -#define TX_CH5 0x3f00 /* Transmit Channel 5 */ -#define MUTE_CH5 0x8000 /* Mute Channel 5 */ -#define TX_CH6 0x3f0000 /* Transmit Channel 6 */ -#define MUTE_CH6 0x800000 /* Mute Channel 6 */ -#define TX_CH7 0x3f000000 /* Transmit Channel 7 */ -#define MUTE_CH7 0x80000000 /* Mute Channel 7 */ - -/* Bit masks for MXVR_ROUTING_2 */ - -#define TX_CH8 0x3f /* Transmit Channel 8 */ -#define MUTE_CH8 0x80 /* Mute Channel 8 */ -#define TX_CH9 0x3f00 /* Transmit Channel 9 */ -#define MUTE_CH9 0x8000 /* Mute Channel 9 */ -#define TX_CH10 0x3f0000 /* Transmit Channel 10 */ -#define MUTE_CH10 0x800000 /* Mute Channel 10 */ -#define TX_CH11 0x3f000000 /* Transmit Channel 11 */ -#define MUTE_CH11 0x80000000 /* Mute Channel 11 */ - -/* Bit masks for MXVR_ROUTING_3 */ - -#define TX_CH12 0x3f /* Transmit Channel 12 */ -#define MUTE_CH12 0x80 /* Mute Channel 12 */ -#define TX_CH13 0x3f00 /* Transmit Channel 13 */ -#define MUTE_CH13 0x8000 /* Mute Channel 13 */ -#define TX_CH14 0x3f0000 /* Transmit Channel 14 */ -#define MUTE_CH14 0x800000 /* Mute Channel 14 */ -#define TX_CH15 0x3f000000 /* Transmit Channel 15 */ -#define MUTE_CH15 0x80000000 /* Mute Channel 15 */ - -/* Bit masks for MXVR_ROUTING_4 */ - -#define TX_CH16 0x3f /* Transmit Channel 16 */ -#define MUTE_CH16 0x80 /* Mute Channel 16 */ -#define TX_CH17 0x3f00 /* Transmit Channel 17 */ -#define MUTE_CH17 0x8000 /* Mute Channel 17 */ -#define TX_CH18 0x3f0000 /* Transmit Channel 18 */ -#define MUTE_CH18 0x800000 /* Mute Channel 18 */ -#define TX_CH19 0x3f000000 /* Transmit Channel 19 */ -#define MUTE_CH19 0x80000000 /* Mute Channel 19 */ - -/* Bit masks for MXVR_ROUTING_5 */ - -#define TX_CH20 0x3f /* Transmit Channel 20 */ -#define MUTE_CH20 0x80 /* Mute Channel 20 */ -#define TX_CH21 0x3f00 /* Transmit Channel 21 */ -#define MUTE_CH21 0x8000 /* Mute Channel 21 */ -#define TX_CH22 0x3f0000 /* Transmit Channel 22 */ -#define MUTE_CH22 0x800000 /* Mute Channel 22 */ -#define TX_CH23 0x3f000000 /* Transmit Channel 23 */ -#define MUTE_CH23 0x80000000 /* Mute Channel 23 */ - -/* Bit masks for MXVR_ROUTING_6 */ - -#define TX_CH24 0x3f /* Transmit Channel 24 */ -#define MUTE_CH24 0x80 /* Mute Channel 24 */ -#define TX_CH25 0x3f00 /* Transmit Channel 25 */ -#define MUTE_CH25 0x8000 /* Mute Channel 25 */ -#define TX_CH26 0x3f0000 /* Transmit Channel 26 */ -#define MUTE_CH26 0x800000 /* Mute Channel 26 */ -#define TX_CH27 0x3f000000 /* Transmit Channel 27 */ -#define MUTE_CH27 0x80000000 /* Mute Channel 27 */ - -/* Bit masks for MXVR_ROUTING_7 */ - -#define TX_CH28 0x3f /* Transmit Channel 28 */ -#define MUTE_CH28 0x80 /* Mute Channel 28 */ -#define TX_CH29 0x3f00 /* Transmit Channel 29 */ -#define MUTE_CH29 0x8000 /* Mute Channel 29 */ -#define TX_CH30 0x3f0000 /* Transmit Channel 30 */ -#define MUTE_CH30 0x800000 /* Mute Channel 30 */ -#define TX_CH31 0x3f000000 /* Transmit Channel 31 */ -#define MUTE_CH31 0x80000000 /* Mute Channel 31 */ - -/* Bit masks for MXVR_ROUTING_8 */ - -#define TX_CH32 0x3f /* Transmit Channel 32 */ -#define MUTE_CH32 0x80 /* Mute Channel 32 */ -#define TX_CH33 0x3f00 /* Transmit Channel 33 */ -#define MUTE_CH33 0x8000 /* Mute Channel 33 */ -#define TX_CH34 0x3f0000 /* Transmit Channel 34 */ -#define MUTE_CH34 0x800000 /* Mute Channel 34 */ -#define TX_CH35 0x3f000000 /* Transmit Channel 35 */ -#define MUTE_CH35 0x80000000 /* Mute Channel 35 */ - -/* Bit masks for MXVR_ROUTING_9 */ - -#define TX_CH36 0x3f /* Transmit Channel 36 */ -#define MUTE_CH36 0x80 /* Mute Channel 36 */ -#define TX_CH37 0x3f00 /* Transmit Channel 37 */ -#define MUTE_CH37 0x8000 /* Mute Channel 37 */ -#define TX_CH38 0x3f0000 /* Transmit Channel 38 */ -#define MUTE_CH38 0x800000 /* Mute Channel 38 */ -#define TX_CH39 0x3f000000 /* Transmit Channel 39 */ -#define MUTE_CH39 0x80000000 /* Mute Channel 39 */ - -/* Bit masks for MXVR_ROUTING_10 */ - -#define TX_CH40 0x3f /* Transmit Channel 40 */ -#define MUTE_CH40 0x80 /* Mute Channel 40 */ -#define TX_CH41 0x3f00 /* Transmit Channel 41 */ -#define MUTE_CH41 0x8000 /* Mute Channel 41 */ -#define TX_CH42 0x3f0000 /* Transmit Channel 42 */ -#define MUTE_CH42 0x800000 /* Mute Channel 42 */ -#define TX_CH43 0x3f000000 /* Transmit Channel 43 */ -#define MUTE_CH43 0x80000000 /* Mute Channel 43 */ - -/* Bit masks for MXVR_ROUTING_11 */ - -#define TX_CH44 0x3f /* Transmit Channel 44 */ -#define MUTE_CH44 0x80 /* Mute Channel 44 */ -#define TX_CH45 0x3f00 /* Transmit Channel 45 */ -#define MUTE_CH45 0x8000 /* Mute Channel 45 */ -#define TX_CH46 0x3f0000 /* Transmit Channel 46 */ -#define MUTE_CH46 0x800000 /* Mute Channel 46 */ -#define TX_CH47 0x3f000000 /* Transmit Channel 47 */ -#define MUTE_CH47 0x80000000 /* Mute Channel 47 */ - -/* Bit masks for MXVR_ROUTING_12 */ - -#define TX_CH48 0x3f /* Transmit Channel 48 */ -#define MUTE_CH48 0x80 /* Mute Channel 48 */ -#define TX_CH49 0x3f00 /* Transmit Channel 49 */ -#define MUTE_CH49 0x8000 /* Mute Channel 49 */ -#define TX_CH50 0x3f0000 /* Transmit Channel 50 */ -#define MUTE_CH50 0x800000 /* Mute Channel 50 */ -#define TX_CH51 0x3f000000 /* Transmit Channel 51 */ -#define MUTE_CH51 0x80000000 /* Mute Channel 51 */ - -/* Bit masks for MXVR_ROUTING_13 */ - -#define TX_CH52 0x3f /* Transmit Channel 52 */ -#define MUTE_CH52 0x80 /* Mute Channel 52 */ -#define TX_CH53 0x3f00 /* Transmit Channel 53 */ -#define MUTE_CH53 0x8000 /* Mute Channel 53 */ -#define TX_CH54 0x3f0000 /* Transmit Channel 54 */ -#define MUTE_CH54 0x800000 /* Mute Channel 54 */ -#define TX_CH55 0x3f000000 /* Transmit Channel 55 */ -#define MUTE_CH55 0x80000000 /* Mute Channel 55 */ - -/* Bit masks for MXVR_ROUTING_14 */ - -#define TX_CH56 0x3f /* Transmit Channel 56 */ -#define MUTE_CH56 0x80 /* Mute Channel 56 */ -#define TX_CH57 0x3f00 /* Transmit Channel 57 */ -#define MUTE_CH57 0x8000 /* Mute Channel 57 */ -#define TX_CH58 0x3f0000 /* Transmit Channel 58 */ -#define MUTE_CH58 0x800000 /* Mute Channel 58 */ -#define TX_CH59 0x3f000000 /* Transmit Channel 59 */ -#define MUTE_CH59 0x80000000 /* Mute Channel 59 */ - -/* Bit masks for MXVR_BLOCK_CNT */ - -#define BCNT 0xffff /* Block Count */ - -/* Bit masks for MXVR_CLK_CTL */ - -#define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */ -#define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */ -#define MXTALMUL 0x30 /* MXVR Crystal Multiplier */ -#define CLKX3SEL 0x80 /* Clock Generation Source Select */ -#define MMCLKEN 0x100 /* Master Clock Enable */ -#define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */ -#define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */ -#define MBCLKEN 0x10000 /* Bit Clock Enable */ -#define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */ -#define INVRX 0x800000 /* Invert Receive Data */ -#define MFSEN 0x1000000 /* Frame Sync Enable */ -#define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */ -#define MFSSEL 0x60000000 /* Frame Sync Select */ -#define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */ - -/* Bit masks for MXVR_CDRPLL_CTL */ - -#define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */ -#define CDRRSTB 0x2 /* MXVR CDRPLL Reset */ -#define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */ -#define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */ -#define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */ -#define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */ -#define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */ -#define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */ -#define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */ - -/* Bit masks for MXVR_FMPLL_CTL */ - -#define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */ -#define FMRSTB 0x2 /* MXVR FMPLL Reset */ -#define FMSVCO 0x4 /* MXVR FMPLL Start VCO */ -#define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */ -#define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */ -#define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */ - -/* Bit masks for MXVR_PIN_CTL */ - -#define MTXONBOD 0x1 /* MTXONB Open Drain Select */ -#define MTXONBG 0x2 /* MTXONB Gates MTX Select */ -#define MFSOE 0x10 /* MFS Output Enable */ -#define MFSGPSEL 0x20 /* MFS General Purpose Output Select */ -#define MFSGPDAT 0x40 /* MFS General Purpose Output Data */ - -/* Bit masks for MXVR_SCLK_CNT */ - -#define SCNT 0xffff /* System Clock Count */ - -/* Bit masks for KPAD_CTL */ - -#define KPAD_EN 0x1 /* Keypad Enable */ -#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ -#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ -#define KPAD_COLEN 0xe000 /* Column Enable Width */ - -/* Bit masks for KPAD_PRESCALE */ - -#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ - -/* Bit masks for KPAD_MSEL */ - -#define DBON_SCALE 0xff /* Debounce Scale Value */ -#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ - -/* Bit masks for KPAD_ROWCOL */ - -#define KPAD_ROW 0xff /* Rows Pressed */ -#define KPAD_COL 0xff00 /* Columns Pressed */ - -/* Bit masks for KPAD_STAT */ - -#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ -#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ -#define KPAD_PRESSED 0x8 /* Key press current status */ - -/* Bit masks for KPAD_SOFTEVAL */ - -#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - -/* Bit masks for ATAPI_CONTROL */ - -#define PIO_START 0x1 /* Start PIO/Reg Op */ -#define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define XFER_DIR 0x8 /* Transfer Direction */ -#define IORDY_EN 0x10 /* IORDY Enable */ -#define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define SOFT_RST 0x40 /* Soft Reset */ -#define DEV_RST 0x80 /* Device Reset */ -#define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define END_ON_TERM 0x200 /* End/Terminate Select */ -#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ - -/* Bit masks for ATAPI_STATUS */ - -#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ - -/* Bit masks for ATAPI_DEV_ADDR */ - -#define DEV_ADDR 0x1f /* Device Address */ - -/* Bit masks for ATAPI_INT_MASK */ - -#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ - -/* Bit masks for ATAPI_INT_STATUS */ - -#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ - -/* Bit masks for ATAPI_LINE_STATUS */ - -#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define ATAPI_ADDR 0x70 /* ATAPI address line status */ -#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_SM_STATE */ - -#define PIO_CSTATE 0xf /* PIO mode state machine current state */ -#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ -#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ -#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_TERMINATE */ - -#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ - -/* Bit masks for ATAPI_REG_TIM_0 */ - -#define T2_REG 0xff /* End of cycle time for register access transfers */ -#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ - -/* Bit masks for ATAPI_PIO_TIM_0 */ - -#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ -#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ -#define T4_REG 0xf000 /* DIOW data hold */ - -/* Bit masks for ATAPI_PIO_TIM_1 */ - -#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ - -/* Bit masks for ATAPI_MULTI_TIM_0 */ - -#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ -#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ - -/* Bit masks for ATAPI_MULTI_TIM_1 */ - -#define TKW 0xff /* Selects DIOW negated pulsewidth */ -#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ - -/* Bit masks for ATAPI_MULTI_TIM_2 */ - -#define TH 0xff /* Selects DIOW data hold */ -#define TEOC 0xff00 /* Selects end of cycle for DMA */ - -/* Bit masks for ATAPI_ULTRA_TIM_0 */ - -#define TACK 0xff /* Selects setup and hold times for TACK */ -#define TENV 0xff00 /* Selects envelope time */ - -/* Bit masks for ATAPI_ULTRA_TIM_1 */ - -#define TDVS 0xff /* Selects data valid setup time */ -#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ - -/* Bit masks for ATAPI_ULTRA_TIM_2 */ - -#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ -#define TMLI 0xff00 /* Selects interlock time */ - -/* Bit masks for ATAPI_ULTRA_TIM_3 */ - -#define TZAH 0xff /* Selects minimum delay required for output */ -#define READY_PAUSE 0xff00 /* Selects ready to pause */ - -/* Bit masks for TIMER_ENABLE1 */ - -#define TIMEN8 0x1 /* Timer 8 Enable */ -#define TIMEN9 0x2 /* Timer 9 Enable */ -#define TIMEN10 0x4 /* Timer 10 Enable */ - -/* Bit masks for TIMER_DISABLE1 */ - -#define TIMDIS8 0x1 /* Timer 8 Disable */ -#define TIMDIS9 0x2 /* Timer 9 Disable */ -#define TIMDIS10 0x4 /* Timer 10 Disable */ - -/* Bit masks for TIMER_STATUS1 */ - -#define TIMIL8 0x1 /* Timer 8 Interrupt */ -#define TIMIL9 0x2 /* Timer 9 Interrupt */ -#define TIMIL10 0x4 /* Timer 10 Interrupt */ -#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ -#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ -#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ -#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ -#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ -#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ - -/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ - -/* Bit masks for USB_FADDR */ - -#define FUNCTION_ADDRESS 0x7f /* Function address */ - -/* Bit masks for USB_POWER */ - -#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define RESUME_MODE 0x4 /* DMA Mode */ -#define RESET 0x8 /* Reset indicator */ -#define HS_MODE 0x10 /* High Speed mode indicator */ -#define HS_ENABLE 0x20 /* high Speed Enable */ -#define SOFT_CONN 0x40 /* Soft connect */ -#define ISO_UPDATE 0x80 /* Isochronous update */ - -/* Bit masks for USB_INTRTX */ - -#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRRX */ - -#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRTXE */ - -#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRRXE */ - -#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRUSB */ - -#define SUSPEND_B 0x1 /* Suspend indicator */ -#define RESUME_B 0x2 /* Resume indicator */ -#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define SOF_B 0x8 /* Start of frame */ -#define CONN_B 0x10 /* Connection indicator */ -#define DISCON_B 0x20 /* Disconnect indicator */ -#define SESSION_REQ_B 0x40 /* Session Request */ -#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ - -/* Bit masks for USB_INTRUSBE */ - -#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define RESUME_BE 0x2 /* Resume indicator int enable */ -#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define SOF_BE 0x8 /* Start of frame int enable */ -#define CONN_BE 0x10 /* Connection indicator int enable */ -#define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ - -/* Bit masks for USB_FRAME */ - -#define FRAME_NUMBER 0x7ff /* Frame number */ - -/* Bit masks for USB_INDEX */ - -#define SELECTED_ENDPOINT 0xf /* selected endpoint */ - -/* Bit masks for USB_GLOBAL_CTL */ - -#define GLOBAL_ENA 0x1 /* enables USB module */ -#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ - -/* Bit masks for USB_OTG_DEV_CTL */ - -#define SESSION 0x1 /* session indicator */ -#define HOST_REQ 0x2 /* Host negotiation request */ -#define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define VBUS0 0x8 /* Vbus level indicator[0] */ -#define VBUS1 0x10 /* Vbus level indicator[1] */ -#define LSDEV 0x20 /* Low-speed indicator */ -#define FSDEV 0x40 /* Full or High-speed indicator */ -#define B_DEVICE 0x80 /* A' or 'B' device indicator */ - -/* Bit masks for USB_OTG_VBUS_IRQ */ - -#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ - -/* Bit masks for USB_OTG_VBUS_MASK */ - -#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ - -/* Bit masks for USB_CSR0 */ - -#define RXPKTRDY 0x1 /* data packet receive indicator */ -#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define STALL_SENT 0x4 /* STALL handshake sent */ -#define DATAEND 0x8 /* Data end indicator */ -#define SETUPEND 0x10 /* Setup end */ -#define SENDSTALL 0x20 /* Send STALL handshake */ -#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define ERROR_H 0x10 /* timeout error indicator host mode */ -#define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ - -/* Bit masks for USB_COUNT0 */ - -#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ - -/* Bit masks for USB_NAKLIMIT0 */ - -#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ - -/* Bit masks for USB_TX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_RX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_TXCSR */ - -#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define ISO_T 0x4000 /* enable Isochronous transfers */ -#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_TH 0x4 /* error condition host mode */ -#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ - -/* Bit masks for USB_TXCOUNT */ - -#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* Bit masks for USB_RXCSR */ - -#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define ISO_R 0x4000 /* enable Isochronous transfers */ -#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ - -/* Bit masks for USB_RXCOUNT */ - -#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ - -/* Bit masks for USB_TXTYPE */ - -#define TARGET_EP_NO_T 0xf /* EP number */ -#define PROTOCOL_T 0xc /* transfer type */ - -/* Bit masks for USB_TXINTERVAL */ - -#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ - -/* Bit masks for USB_RXTYPE */ - -#define TARGET_EP_NO_R 0xf /* EP number */ -#define PROTOCOL_R 0xc /* transfer type */ - -/* Bit masks for USB_RXINTERVAL */ - -#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ - -/* Bit masks for USB_DMA_INTERRUPT */ - -#define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define DMA7_INT 0x80 /* DMA7 pending interrupt */ - -/* Bit masks for USB_DMAxCONTROL */ - -#define DMA_ENA 0x1 /* DMA enable */ -#define DIRECTION 0x2 /* direction of DMA transfer */ -#define MODE 0x4 /* DMA Bus error */ -#define INT_ENA 0x8 /* Interrupt enable */ -#define EPNUM 0xf0 /* EP number */ -#define BUSERROR 0x100 /* DMA Bus error */ - -/* Bit masks for USB_DMAxADDRHIGH */ - -#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxADDRLOW */ - -#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTHIGH */ - -#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTLOW */ - -#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for HMDMAx_CONTROL */ - -#define HMDMAEN 0x1 /* Handshake MDMA Enable */ -#define REP 0x2 /* Handshake MDMA Request Polarity */ -#define UTE 0x8 /* Urgency Threshold Enable */ -#define OIE 0x10 /* Overflow Interrupt Enable */ -#define BDIE 0x20 /* Block Done Interrupt Enable */ -#define MBDI 0x40 /* Mask Block Done Interrupt */ -#define DRQ 0x300 /* Handshake MDMA Request Type */ -#define RBC 0x1000 /* Force Reload of BCOUNT */ -#define PS 0x2000 /* Pin Status */ -#define OI 0x4000 /* Overflow Interrupt Generated */ -#define BDI 0x8000 /* Block Done Interrupt Generated */ - -/* ******************************************* */ -/* MULTI BIT MACRO ENUMERATIONS */ -/* ******************************************* */ - -/* ************************ */ -/* MXVR Address Offsets */ -/* ************************ */ - -/* Control Message Receive Buffer (CMRB) Address Offsets */ - -#define CMRB_STRIDE 0x00000016lu - -#define CMRB_DST_OFFSET 0x00000000lu -#define CMRB_SRC_OFFSET 0x00000002lu -#define CMRB_DATA_OFFSET 0x00000005lu - -/* Control Message Transmit Buffer (CMTB) Address Offsets */ - -#define CMTB_PRIO_OFFSET 0x00000000lu -#define CMTB_DST_OFFSET 0x00000002lu -#define CMTB_SRC_OFFSET 0x00000004lu -#define CMTB_TYPE_OFFSET 0x00000006lu -#define CMTB_DATA_OFFSET 0x00000007lu - -#define CMTB_ANSWER_OFFSET 0x0000000Alu - -#define CMTB_STAT_N_OFFSET 0x00000018lu -#define CMTB_STAT_A_OFFSET 0x00000016lu -#define CMTB_STAT_D_OFFSET 0x0000000Elu -#define CMTB_STAT_R_OFFSET 0x00000014lu -#define CMTB_STAT_W_OFFSET 0x00000014lu -#define CMTB_STAT_G_OFFSET 0x00000014lu - -/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */ - -#define APRB_STRIDE 0x00000400lu - -#define APRB_DST_OFFSET 0x00000000lu -#define APRB_LEN_OFFSET 0x00000002lu -#define APRB_SRC_OFFSET 0x00000004lu -#define APRB_DATA_OFFSET 0x00000006lu - -/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */ - -#define APTB_PRIO_OFFSET 0x00000000lu -#define APTB_DST_OFFSET 0x00000002lu -#define APTB_LEN_OFFSET 0x00000004lu -#define APTB_SRC_OFFSET 0x00000006lu -#define APTB_DATA_OFFSET 0x00000008lu - -/* Remote Read Buffer (RRDB) Address Offsets */ - -#define RRDB_WADDR_OFFSET 0x00000100lu -#define RRDB_WLEN_OFFSET 0x00000101lu - -/* **************** */ -/* MXVR Macros */ -/* **************** */ - -/* MXVR_CONFIG Macros */ - -#define SET_MSB(x) ( ( (x) & 0xF ) << 9) - -/* MXVR_INT_STAT_1 Macros */ - -#define DONEX(x) (0x00000002 << (4 * (x))) -#define HDONEX(x) (0x00000001 << (4 * (x))) - -/* MXVR_INT_EN_1 Macros */ - -#define DONEENX(x) (0x00000002 << (4 * (x))) -#define HDONEENX(x) (0x00000001 << (4 * (x))) - -/* MXVR_CDRPLL_CTL Macros */ - -#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16) - -/* MXVR_FMPLL_CTL Macros */ - -#define SET_CDRCPSEL(x) ( ( (x) & 0xFF ) << 24) -#define SET_FMCPSEL(x) ( ( (x) & 0xFF ) << 24) - #endif /* _DEF_BF549_H */ diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/trunk/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 8590c8c78336..ab04d137fd8b 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -1609,44 +1609,6 @@ #define PINT2 0x40000000 /* Pin Interrupt 2 */ #define PINT3 0x80000000 /* Pin Interrupt 3 */ -/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */ - -#define DMAEN 0x1 /* DMA Channel Enable */ -#define WNR 0x2 /* DMA Direction */ -#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */ -#define DMA2D 0x10 /* DMA Mode */ -#define RESTART 0x20 /* Work Unit Transitions */ -#define DI_SEL 0x40 /* Data Interrupt Timing Select */ -#define DI_EN 0x80 /* Data Interrupt Enable */ - -#define NDSIZE 0xf00 /* Flex Descriptor Size */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ - -#define DMAFLOW 0xf000 /* Next Operation */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ - -#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x2 /* DMA Error Interrupt Status */ -#define DFETCH 0x4 /* DMA Descriptor Fetch */ -#define DMA_RUN 0x8 /* DMA Channel Running */ - /* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ #define CTYPE 0x40 /* DMA Channel Type */ @@ -1815,10 +1777,6 @@ #define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */ #define CORE_MERROR 0x80 /* Core Error (2nd) */ -/* Bit masks for EBIU_ERRADD */ - -#define ERROR_ADDRESS 0xffffffff /* Error Address */ - /* Bit masks for EBIU_RSTCTL */ #define DDRSRESET 0x1 /* DDR soft reset */ @@ -1827,98 +1785,6 @@ #define SRACK 0x10 /* Self-refresh acknowledge */ #define MDDRENABLE 0x20 /* Mobile DDR enable */ -/* Bit masks for EBIU_DDRBRC0 */ - -#define BRC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC1 */ - -#define BRC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC2 */ - -#define BRC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC3 */ - -#define BRC3 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC4 */ - -#define BRC4 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC5 */ - -#define BRC5 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC6 */ - -#define BRC6 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC7 */ - -#define BRC7 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC0 */ - -#define BWC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC1 */ - -#define BWC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC2 */ - -#define BWC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC3 */ - -#define BWC3 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC4 */ - -#define BWC4 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC5 */ - -#define BWC5 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC6 */ - -#define BWC6 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC7 */ - -#define BWC7 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRACCT */ - -#define ACCT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRTACT */ - -#define TECT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRARCT */ - -#define ARCT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC0 */ - -#define GC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC1 */ - -#define GC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC2 */ - -#define GC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC3 */ - -#define GC3 0xffffffff /* Count */ - /* Bit masks for EBIU_DDRMCEN */ #define B0WCENABLE 0x1 /* Bank 0 write count enable */ @@ -2092,12 +1958,6 @@ #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ -/* Bit masks for WDOG_CTL */ - -#define WDEV 0x6 /* Watchdog Event */ -#define WDEN 0xff0 /* Watchdog Enable */ -#define WDRO 0x8000 /* Watchdog Rolled Over */ - /* Bit masks for CNT_CONFIG */ #define CNTE 0x1 /* Counter Enable */ @@ -2149,81 +2009,6 @@ #define DPRESCALE 0xf /* Load Counter Register */ -/* Bit masks for RTC_STAT */ - -#define SECONDS 0x3f /* Seconds */ -#define MINUTES 0xfc0 /* Minutes */ -#define HOURS 0x1f000 /* Hours */ -#define DAY_COUNTER 0xfffe0000 /* Day Counter */ - -/* Bit masks for RTC_ICTL */ - -#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */ -#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */ -#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */ -#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */ -#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */ -#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */ -#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */ -#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */ - -/* Bit masks for RTC_ISTAT */ - -#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */ -#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */ -#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */ -#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */ -#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */ -#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */ -#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */ -#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */ -#define WRITE_COMPLETE 0x8000 /* Write Complete */ - -/* Bit masks for RTC_SWCNT */ - -#define STOPWATCH_COUNT 0xffff /* Stopwatch Count */ - -/* Bit masks for RTC_ALARM */ - -#define SECONDS 0x3f /* Seconds */ -#define MINUTES 0xfc0 /* Minutes */ -#define HOURS 0x1f000 /* Hours */ -#define DAY 0xfffe0000 /* Day */ - -/* Bit masks for RTC_PREN */ - -#define PREN 0x1 /* Prescaler Enable */ - -/* Bit masks for OTP_CONTROL */ - -#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ -#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define FWREN 0x8000 /* OTP/Fuse Write Enable */ - -/* Bit masks for OTP_BEN */ - -#define FBEN 0xffff /* OTP/Fuse Byte Enable */ - -/* Bit masks for OTP_STATUS */ - -#define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define FERROR 0x2 /* OTP/Fuse Access Error */ -#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ - -/* Bit masks for OTP_TIMING */ - -#define USECDIV 0xff /* Micro Second Divider */ -#define READACC 0x7f00 /* Read Access Time */ -#define CPUMPRL 0x38000 /* Charge Pump Release Time */ -#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ -#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ -#define PGMTIME 0xff000000 /* Program Time */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ @@ -2252,26 +2037,6 @@ #define AFEXIT 0x10 /* Authentication Firmware Exit */ #define SECSTAT 0xe0 /* Secure Status */ -/* Bit masks for PLL_DIV */ - -#define CSEL 0x30 /* Core Select */ -#define SSEL 0xf /* System Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ - -/* Bit masks for PLL_CTL */ - -#define MSEL 0x7e00 /* Multiplier Select */ -#define BYPASS 0x100 /* PLL Bypass Enable */ -#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */ -#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */ -#define PDWN 0x20 /* Power Down */ -#define STOPCK 0x8 /* Stop Clock */ -#define PLL_OFF 0x2 /* Disable PLL */ -#define DF 0x1 /* Divide Frequency */ - /* SWRST Masks */ #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ @@ -2279,52 +2044,6 @@ #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ -/* Bit masks for PLL_STAT */ - -#define PLL_LOCKED 0x20 /* PLL Locked Status */ -#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */ -#define FULL_ON 0x2 /* Full-On Mode */ -#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */ -#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */ -#define CANWS 0x800 /* CAN Wake-Up Status */ -#define USBWS 0x2000 /* USB Wake-Up Status */ -#define KPADWS 0x4000 /* Keypad Wake-Up Status */ -#define ROTWS 0x8000 /* Rotary Wake-Up Status */ -#define GPWS 0x1000 /* General-Purpose Wake-Up Status */ - -/* Bit masks for VR_CTL */ - -#define FREQ 0x3 /* Regulator Switching Frequency */ -#define GAIN 0xc /* Voltage Output Level Gain */ -#define VLEV 0xf0 /* Internal Voltage Level */ -#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */ -#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */ -#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */ -#define GPWE 0x400 /* General-Purpose Wake-Up Enable */ -#define USBWE 0x800 /* USB Wake-Up Enable */ -#define KPADWE 0x1000 /* Keypad Wake-Up Enable */ -#define ROTWE 0x2000 /* Rotary Wake-Up Enable */ - -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN_5 0x0000 /* GAIN = 5*/ -#define GAIN_10 0x0004 /* GAIN = 1*/ -#define GAIN_20 0x0008 /* GAIN = 2*/ -#define GAIN_50 0x000C /* GAIN = 5*/ - -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - /* Bit masks for NFC_CTL */ #define WR_DLY 0xf /* Write Strobe Delay */ @@ -2489,14 +2208,6 @@ #define UCCT 0x40 /* Universal Counter CAN Trigger */ #define UCE 0x80 /* Universal Counter Enable */ -/* Bit masks for CAN0_UCCNT */ - -#define UCCNT 0xffff /* Universal Counter Count Value */ - -/* Bit masks for CAN0_UCRC */ - -#define UCVAL 0xffff /* Universal Counter Reload/Capture Value */ - /* Bit masks for CAN0_CEC */ #define RXECNT 0xff /* Receive Error Counter */ diff --git a/trunk/arch/blackfin/mach-bf561/boards/Kconfig b/trunk/arch/blackfin/mach-bf561/boards/Kconfig index e4bc6d7c5a6a..1aa529b9f8bb 100644 --- a/trunk/arch/blackfin/mach-bf561/boards/Kconfig +++ b/trunk/arch/blackfin/mach-bf561/boards/Kconfig @@ -19,4 +19,11 @@ config BFIN561_BLUETECHNIX_CM help CM-BF561 support for EVAL- and DEV-Board. +config BFIN561_ACVILON + bool "BF561-ACVILON" + help + BF561-ACVILON System On Module support (SO-DIMM 144). + For more information about Acvilon BF561 SoM + please go to http://www.niistt.ru/ + endchoice diff --git a/trunk/arch/blackfin/mach-bf561/boards/Makefile b/trunk/arch/blackfin/mach-bf561/boards/Makefile index 3a152559e957..a5879f7857ad 100644 --- a/trunk/arch/blackfin/mach-bf561/boards/Makefile +++ b/trunk/arch/blackfin/mach-bf561/boards/Makefile @@ -2,6 +2,7 @@ # arch/blackfin/mach-bf561/boards/Makefile # +obj-$(CONFIG_BFIN561_ACVILON) += acvilon.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/trunk/arch/blackfin/mach-bf561/boards/acvilon.c b/trunk/arch/blackfin/mach-bf561/boards/acvilon.c new file mode 100644 index 000000000000..07e8dc8770da --- /dev/null +++ b/trunk/arch/blackfin/mach-bf561/boards/acvilon.c @@ -0,0 +1,551 @@ +/* + * File: arch/blackfin/mach-bf561/acvilon.c + * Based on: arch/blackfin/mach-bf561/ezkit.c + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2009 CJSC "NII STT" + * + * Bugs: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * + * For more information about Acvilon BF561 SoM please + * go to http://www.niistt.ru/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Acvilon board"; + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#include +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x20000000, + .end = 0x20000000 + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF15, + .end = IRQ_PF15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +static struct resource bfin_i2c_pca_resources[] = { + { + .name = "pca9564-regs", + .start = 0x2C000000, + .end = 0x2C000000 + 16, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, + }, { + + .start = IRQ_PF8, + .end = IRQ_PF8, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +struct i2c_pca9564_pf_platform_data pca9564_platform_data = { + .gpio = -1, + .i2c_clock_speed = 330000, + .timeout = 10000 +}; + +/* PCA9564 I2C Bus driver */ +static struct platform_device bfin_i2c_pca_device = { + .name = "i2c-pca-platform", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_i2c_pca_resources), + .resource = bfin_i2c_pca_resources, + .dev = { + .platform_data = &pca9564_platform_data, + } +}; + +/* I2C devices fitted. */ +static struct i2c_board_info acvilon_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, + { + I2C_BOARD_INFO("tcn75", 0x49), + }, +}; + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +static struct platdata_mtd_ram mtd_ram_data = { + .mapname = "rootfs(RAM)", + .bankwidth = 4, +}; + +static struct resource mtd_ram_resource = { + .start = 0x4000000, + .end = 0x5ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mtd_ram_device = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &mtd_ram_data, + }, + .num_resources = 1, + .resource = &mtd_ram_resource, +}; +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x28000000, + .end = 0x28000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL + 2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + /* Passed to driver */ + .platform_data = &bfin_uart0_peripherals, + }, +}; +#endif +#endif + +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + +#ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition bfin_plat_nand_partitions[] = { + { + .name = "params(nand)", + .size = 32 * 1024 * 1024, + .offset = 0, + }, { + .name = "userfs(nand)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; +#endif + +#define BFIN_NAND_PLAT_CLE 2 +#define BFIN_NAND_PLAT_ALE 3 + +static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); + else + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); +} + +#define BFIN_NAND_PLAT_READY GPIO_PF10 +static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(BFIN_NAND_PLAT_READY); +} + +static struct platform_nand_data bfin_plat_nand_data = { + .chip = { + .chip_delay = 30, +#ifdef CONFIG_MTD_PARTITIONS + .part_probe_types = part_probes, + .partitions = bfin_plat_nand_partitions, + .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), +#endif + }, + .ctrl = { + .cmd_ctrl = bfin_plat_nand_cmd_ctrl, + .dev_ready = bfin_plat_nand_dev_ready, + }, +}; + +#define MAX(x, y) (x > y ? x : y) +static struct resource bfin_plat_nand_resources = { + .start = 0x24000000, + .end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), + .flags = IORESOURCE_IO, +}; + +static struct platform_device bfin_async_nand_device = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &bfin_plat_nand_resources, + .dev = { + .platform_data = &bfin_plat_nand_data, + }, +}; + +static void bfin_plat_nand_init(void) +{ + gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); +} +#else +static void bfin_plat_nand_init(void) +{ +} +#endif + +#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +static struct mtd_partition bfin_spi_dataflash_partitions[] = { + { + .name = "bootloader", + .size = 0x4200, + .offset = 0, + .mask_flags = MTD_CAP_ROM}, + { + .name = "u-boot", + .size = 0x42000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "u-boot(params)", + .size = 0x4200, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "kernel", + .size = 0x294000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "params", + .size = 0x42000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_dataflash_data = { + .name = "SPI Dataflash", + .parts = bfin_spi_dataflash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), +}; + +/* DataFlash chip */ +static struct bfin5xx_spi_chip data_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip */ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 3, + .controller_data = &spidev_chip_info, + }, +#endif +#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* Framework chip select */ + .platform_data = &bfin_spi_dataflash_data, + .controller_data = &data_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +static struct resource bfin_gpios_resources = { + .start = 31, +/* .end = MAX_BLACKFIN_GPIOS - 1, */ + .end = 32, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +static const unsigned int cclk_vlev_datasheet[] = { + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 300000000), + VRPAIR(VLEV_095, 313000000), + VRPAIR(VLEV_100, 350000000), + VRPAIR(VLEV_105, 400000000), + VRPAIR(VLEV_110, 444000000), + VRPAIR(VLEV_115, 450000000), + VRPAIR(VLEV_120, 475000000), + VRPAIR(VLEV_125, 500000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */ , +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *acvilon_devices[] __initdata = { + &bfin_dpmc, + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + + &bfin_gpios_device, + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + &smsc911x_device, +#endif + + &bfin_i2c_pca_device, + +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + &bfin_async_nand_device, +#endif + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) + &mtd_ram_device, +#endif + +}; + +static int __init acvilon_init(void) +{ + int ret; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + + bfin_plat_nand_init(); + ret = + platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices)); + if (ret < 0) + return ret; + + i2c_register_board_info(0, acvilon_i2c_devs, + ARRAY_SIZE(acvilon_i2c_devs)); + + bfin_write_FIO0_FLAG_C(1 << 14); + msleep(5); + bfin_write_FIO0_FLAG_S(1 << 14); + + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(acvilon_init); + +static struct platform_device *acvilon_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(acvilon_early_devices, + ARRAY_SIZE(acvilon_early_devices)); +} diff --git a/trunk/arch/blackfin/mach-bf561/boards/ezkit.c b/trunk/arch/blackfin/mach-bf561/boards/ezkit.c index 9e2d8cfba546..ffd3e6a80d1a 100644 --- a/trunk/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/trunk/arch/blackfin/mach-bf561/boards/ezkit.c @@ -49,7 +49,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -159,28 +159,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) -static struct resource ax88180_resources[] = { - [0] = { - .start = 0x2c000000, - .end = 0x2c000000 + 0x8000, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL), - }, -}; - -static struct platform_device ax88180_device = { - .name = "ax88180", - .id = -1, - .num_resources = ARRAY_SIZE(ax88180_resources), - .resource = ax88180_resources, -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -421,10 +399,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &smc91x_device, #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) - &ax88180_device, -#endif - #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) &net2272_bfin_device, #endif diff --git a/trunk/arch/blackfin/mach-bf561/coreb.c b/trunk/arch/blackfin/mach-bf561/coreb.c index 1e60a92dd602..deb2271d09a3 100644 --- a/trunk/arch/blackfin/mach-bf561/coreb.c +++ b/trunk/arch/blackfin/mach-bf561/coreb.c @@ -22,8 +22,8 @@ #define CMD_COREB_STOP 3 #define CMD_COREB_RESET 4 -static int -coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long +coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int ret = 0; @@ -49,8 +49,8 @@ coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned l } static const struct file_operations coreb_fops = { - .owner = THIS_MODULE, - .ioctl = coreb_ioctl, + .owner = THIS_MODULE, + .unlocked_ioctl = coreb_ioctl, }; static struct miscdevice coreb_dev = { diff --git a/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h b/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h index a31e509553fb..4c8e36b7fb33 100644 --- a/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -884,65 +884,11 @@ /* System MMR Register Bits */ /******************************************************************************* */ -/* ********************* PLL AND RESET MASKS ************************ */ - -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ -#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x00000008 /* Core clock off */ -#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ -#define BYPASS 0x00000100 /* Bypass the PLL */ - /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 #define CHIPID_FAMILY 0x0FFFF000 #define CHIPID_MANUFACTURE 0x00000FFE -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5*/ -#define GAIN_10 0x0004 /* GAIN = 1*/ -#define GAIN_20 0x0008 /* GAIN = 2*/ -#define GAIN_50 0x000C /* GAIN = 5*/ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - -/* PLL_DIV Masks */ -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -#define CSEL 0x30 /* Core Select */ -#define SSEL 0xf /* System Select */ -#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - /* SICA_SYSCR Masks */ #define COREB_SRAM_INIT 0x0020 @@ -1150,53 +1096,6 @@ /* ********** DMA CONTROLLER MASKS *********************8 */ -/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ -#define DMAEN 0x00000001 /* Channel Enable */ -#define WNR 0x00000002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ -#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ -#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ -#define DMA2D 0x00000010 /* 2D/1D* Mode */ -#define RESTART 0x00000020 /* Restart */ -#define DI_SEL 0x00000040 /* Data Interrupt Select */ -#define DI_EN 0x00000080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x00000900 /* Next Descriptor Size */ -#define DMAFLOW 0x00007000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ - -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ - -#define DMA_DONE 0x00000001 /* DMA Done Indicator */ -#define DMA_ERR 0x00000002 /* DMA Error Indicator */ -#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x00000008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ - /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ diff --git a/trunk/arch/blackfin/mach-bf561/smp.c b/trunk/arch/blackfin/mach-bf561/smp.c index 510f57641495..0192532e96a2 100644 --- a/trunk/arch/blackfin/mach-bf561/smp.c +++ b/trunk/arch/blackfin/mach-bf561/smp.c @@ -52,8 +52,6 @@ int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ void __cpuinit platform_secondary_init(unsigned int cpu) { - local_irq_disable(); - /* Clone setup for peripheral interrupt sources from CoreA. */ bfin_write_SICB_IMASK0(bfin_read_SICA_IMASK0()); bfin_write_SICB_IMASK1(bfin_read_SICA_IMASK1()); @@ -70,11 +68,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) bfin_write_SICB_IAR7(bfin_read_SICA_IAR7()); SSYNC(); - local_irq_enable(); - - /* Calibrate loops per jiffy value. */ - calibrate_delay(); - /* Store CPU-private information to the cpu_data array. */ bfin_setup_cpudata(cpu); @@ -108,9 +101,13 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle barrier(); } - spin_unlock(&boot_lock); - - return cpu_isset(cpu, cpu_callin_map) ? 0 : -ENOSYS; + if (cpu_isset(cpu, cpu_callin_map)) { + cpu_set(cpu, cpu_online_map); + /* release the lock and let coreb run */ + spin_unlock(&boot_lock); + return 0; + } else + panic("CPU%u: processor failed to boot\n", cpu); } void __init platform_request_ipi(irq_handler_t handler) diff --git a/trunk/arch/blackfin/mach-common/clocks-init.c b/trunk/arch/blackfin/mach-common/clocks-init.c index ef6870e9eea6..d5cfe611b778 100644 --- a/trunk/arch/blackfin/mach-common/clocks-init.c +++ b/trunk/arch/blackfin/mach-common/clocks-init.c @@ -13,6 +13,7 @@ #include #include #include +#include #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ diff --git a/trunk/arch/blackfin/mach-common/cpufreq.c b/trunk/arch/blackfin/mach-common/cpufreq.c index 01506504e6d0..777582897253 100644 --- a/trunk/arch/blackfin/mach-common/cpufreq.c +++ b/trunk/arch/blackfin/mach-common/cpufreq.c @@ -13,7 +13,7 @@ #include #include #include - +#include /* this is the table of CCLK frequencies, in Hz */ /* .index is the entry in the auxillary dpm_state_table[] */ @@ -138,7 +138,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) dpm_state_table[index].tscale); } - policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000; + policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ + /*Now ,only support one cpu */ policy->cur = cclk; cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); diff --git a/trunk/arch/blackfin/mach-common/dpmc_modes.S b/trunk/arch/blackfin/mach-common/dpmc_modes.S index 8009a512fb11..b03716896051 100644 --- a/trunk/arch/blackfin/mach-common/dpmc_modes.S +++ b/trunk/arch/blackfin/mach-common/dpmc_modes.S @@ -404,6 +404,21 @@ ENTRY(_do_hibernate) PM_SYS_PUSH(EBIU_FCTL) #endif +#ifdef PORTCIO_FER + PM_SYS_PUSH16(PORTCIO_DIR) + PM_SYS_PUSH16(PORTCIO_INEN) + PM_SYS_PUSH16(PORTCIO) + PM_SYS_PUSH16(PORTCIO_FER) + PM_SYS_PUSH16(PORTDIO_DIR) + PM_SYS_PUSH16(PORTDIO_INEN) + PM_SYS_PUSH16(PORTDIO) + PM_SYS_PUSH16(PORTDIO_FER) + PM_SYS_PUSH16(PORTEIO_DIR) + PM_SYS_PUSH16(PORTEIO_INEN) + PM_SYS_PUSH16(PORTEIO) + PM_SYS_PUSH16(PORTEIO_FER) +#endif + PM_SYS_PUSH16(SYSCR) /* Save Core MMRs */ @@ -716,6 +731,21 @@ ENTRY(_do_hibernate) P0.L = lo(PLL_CTL); PM_SYS_POP16(SYSCR) +#ifdef PORTCIO_FER + PM_SYS_POP16(PORTEIO_FER) + PM_SYS_POP16(PORTEIO) + PM_SYS_POP16(PORTEIO_INEN) + PM_SYS_POP16(PORTEIO_DIR) + PM_SYS_POP16(PORTDIO_FER) + PM_SYS_POP16(PORTDIO) + PM_SYS_POP16(PORTDIO_INEN) + PM_SYS_POP16(PORTDIO_DIR) + PM_SYS_POP16(PORTCIO_FER) + PM_SYS_POP16(PORTCIO) + PM_SYS_POP16(PORTCIO_INEN) + PM_SYS_POP16(PORTCIO_DIR) +#endif + #ifdef EBIU_FCTL PM_SYS_POP(EBIU_FCTL) PM_SYS_POP(EBIU_MODE) diff --git a/trunk/arch/blackfin/mach-common/entry.S b/trunk/arch/blackfin/mach-common/entry.S index f3f8bb46b517..b0ed0b487ff2 100644 --- a/trunk/arch/blackfin/mach-common/entry.S +++ b/trunk/arch/blackfin/mach-common/entry.S @@ -713,6 +713,8 @@ ENTRY(_system_call) cc = BITTST(r7, TIF_RESTORE_SIGMASK); if cc jump .Lsyscall_do_signals; cc = BITTST(r7, TIF_SIGPENDING); + if cc jump .Lsyscall_do_signals; + cc = BITTST(r7, TIF_NOTIFY_RESUME); if !cc jump .Lsyscall_really_exit; .Lsyscall_do_signals: /* Reenable interrupts. */ @@ -721,7 +723,7 @@ ENTRY(_system_call) r0 = sp; SP += -12; - call _do_signal; + call _do_notify_resume; SP += 12; .Lsyscall_really_exit: diff --git a/trunk/arch/blackfin/mach-common/ints-priority.c b/trunk/arch/blackfin/mach-common/ints-priority.c index 660ea1bec54c..1873b2c1fede 100644 --- a/trunk/arch/blackfin/mach-common/ints-priority.c +++ b/trunk/arch/blackfin/mach-common/ints-priority.c @@ -25,11 +25,20 @@ #include #include #include +#include +#include +#include #define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) #ifdef BF537_FAMILY # define BF537_GENERIC_ERROR_INT_DEMUX +# define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */ +# define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */ +# define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ +# define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ +# define UART_ERR_MASK (0x6) /* UART_IIR */ +# define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ #else # undef BF537_GENERIC_ERROR_INT_DEMUX #endif @@ -324,11 +333,9 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, irq = IRQ_CAN_ERROR; else if (bfin_read_SPI_STAT() & SPI_ERR_MASK) irq = IRQ_SPI_ERROR; - else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) && - (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0)) + else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK) irq = IRQ_UART0_ERROR; - else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) && - (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0)) + else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK) irq = IRQ_UART1_ERROR; if (irq) { diff --git a/trunk/arch/blackfin/mach-common/smp.c b/trunk/arch/blackfin/mach-common/smp.c index d92b168c8328..369e687582b7 100644 --- a/trunk/arch/blackfin/mach-common/smp.c +++ b/trunk/arch/blackfin/mach-common/smp.c @@ -336,13 +336,6 @@ int __cpuinit __cpu_up(unsigned int cpu) ret = platform_boot_secondary(cpu, idle); - if (ret) { - cpu_clear(cpu, cpu_present_map); - printk(KERN_CRIT "CPU%u: processor failed to boot (%d)\n", cpu, ret); - free_task(idle); - } else - cpu_set(cpu, cpu_online_map); - secondary_stack = NULL; return ret; @@ -418,9 +411,16 @@ void __cpuinit secondary_start_kernel(void) setup_secondary(cpu); + platform_secondary_init(cpu); + local_irq_enable(); - platform_secondary_init(cpu); + /* + * Calibrate loops per jiffy value. + * IRQs need to be enabled here - D-cache can be invalidated + * in timer irq handler, so core B can read correct jiffies. + */ + calibrate_delay(); cpu_idle(); } diff --git a/trunk/arch/cris/arch-v32/kernel/head.S b/trunk/arch/cris/arch-v32/kernel/head.S index 3db478eb5155..76266f80a5f1 100644 --- a/trunk/arch/cris/arch-v32/kernel/head.S +++ b/trunk/arch/cris/arch-v32/kernel/head.S @@ -10,7 +10,6 @@ * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so * -traditional must not be used when assembling this file. */ -#include #include #include #include diff --git a/trunk/arch/cris/include/asm/asm-offsets.h b/trunk/arch/cris/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/cris/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/cris/include/asm/elf.h b/trunk/arch/cris/include/asm/elf.h index 0f51b10b9f4f..8a3d8e2b33c1 100644 --- a/trunk/arch/cris/include/asm/elf.h +++ b/trunk/arch/cris/include/asm/elf.h @@ -64,8 +64,6 @@ typedef unsigned long elf_fpregset_t; #define EF_CRIS_VARIANT_COMMON_V10_V32 0x00000004 /* End of excerpt from {binutils}/include/elf/cris.h. */ -#define USE_ELF_CORE_DUMP - #define ELF_EXEC_PAGESIZE 8192 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/trunk/arch/cris/kernel/asm-offsets.c b/trunk/arch/cris/kernel/asm-offsets.c index ddd6fbbe75de..dd7b8e983221 100644 --- a/trunk/arch/cris/kernel/asm-offsets.c +++ b/trunk/arch/cris/kernel/asm-offsets.c @@ -1,6 +1,5 @@ #include #include -#include /* * Generate definitions needed by assembly language modules. diff --git a/trunk/arch/cris/kernel/vmlinux.lds.S b/trunk/arch/cris/kernel/vmlinux.lds.S index bbfda67d2907..d49d17d2a14f 100644 --- a/trunk/arch/cris/kernel/vmlinux.lds.S +++ b/trunk/arch/cris/kernel/vmlinux.lds.S @@ -8,7 +8,6 @@ * the kernel has booted. */ -#include #include #include diff --git a/trunk/arch/frv/include/asm/asm-offsets.h b/trunk/arch/frv/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/frv/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/frv/include/asm/elf.h b/trunk/arch/frv/include/asm/elf.h index 7bbf6e47f8c8..c3819804a74b 100644 --- a/trunk/arch/frv/include/asm/elf.h +++ b/trunk/arch/frv/include/asm/elf.h @@ -115,7 +115,6 @@ do { \ __kernel_frame0_ptr->gr29 = 0; \ } while(0) -#define USE_ELF_CORE_DUMP #define CORE_DUMP_USE_REGSET #define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC #define ELF_EXEC_PAGESIZE 16384 diff --git a/trunk/arch/frv/kernel/setup.c b/trunk/arch/frv/kernel/setup.c index 55e4fab7c0bc..75cf7f4b2fa8 100644 --- a/trunk/arch/frv/kernel/setup.c +++ b/trunk/arch/frv/kernel/setup.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. */ -#include +#include #include #include #include diff --git a/trunk/arch/h8300/Kconfig b/trunk/arch/h8300/Kconfig index 9420648352b8..53cc669e6d59 100644 --- a/trunk/arch/h8300/Kconfig +++ b/trunk/arch/h8300/Kconfig @@ -10,6 +10,10 @@ config H8300 default y select HAVE_IDE +config SYMBOL_PREFIX + string + default "_" + config MMU bool default n diff --git a/trunk/arch/h8300/include/asm/asm-offsets.h b/trunk/arch/h8300/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/h8300/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/h8300/include/asm/elf.h b/trunk/arch/h8300/include/asm/elf.h index 94e2284c8816..c24fa250d653 100644 --- a/trunk/arch/h8300/include/asm/elf.h +++ b/trunk/arch/h8300/include/asm/elf.h @@ -34,7 +34,6 @@ typedef unsigned long elf_fpregset_t; #define ELF_PLAT_INIT(_r) _r->er1 = 0 -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/trunk/arch/h8300/include/asm/module.h b/trunk/arch/h8300/include/asm/module.h index de23231f3196..8e46724b7c09 100644 --- a/trunk/arch/h8300/include/asm/module.h +++ b/trunk/arch/h8300/include/asm/module.h @@ -8,6 +8,4 @@ struct mod_arch_specific { }; #define Elf_Sym Elf32_Sym #define Elf_Ehdr Elf32_Ehdr -#define MODULE_SYMBOL_PREFIX "_" - #endif /* _ASM_H8/300_MODULE_H */ diff --git a/trunk/arch/h8300/kernel/vmlinux.lds.S b/trunk/arch/h8300/kernel/vmlinux.lds.S index b9e24907e6ea..03d356d96e5d 100644 --- a/trunk/arch/h8300/kernel/vmlinux.lds.S +++ b/trunk/arch/h8300/kernel/vmlinux.lds.S @@ -1,4 +1,3 @@ -#define VMLINUX_SYMBOL(_sym_) _##_sym_ #include #include diff --git a/trunk/arch/ia64/Makefile b/trunk/arch/ia64/Makefile index e7cbaa02cd0b..475e2725fbde 100644 --- a/trunk/arch/ia64/Makefile +++ b/trunk/arch/ia64/Makefile @@ -103,4 +103,4 @@ archprepare: make_nr_irqs_h FORCE PHONY += make_nr_irqs_h FORCE make_nr_irqs_h: FORCE - $(Q)$(MAKE) $(build)=arch/ia64/kernel include/asm-ia64/nr-irqs.h + $(Q)$(MAKE) $(build)=arch/ia64/kernel include/generated/nr-irqs.h diff --git a/trunk/arch/ia64/hp/common/sba_iommu.c b/trunk/arch/ia64/hp/common/sba_iommu.c index f332e3fe4237..e14c492a8a93 100644 --- a/trunk/arch/ia64/hp/common/sba_iommu.c +++ b/trunk/arch/ia64/hp/common/sba_iommu.c @@ -677,12 +677,19 @@ sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size) spin_unlock_irqrestore(&ioc->saved_lock, flags); pide = sba_search_bitmap(ioc, dev, pages_needed, 0); - if (unlikely(pide >= (ioc->res_size << 3))) - panic(__FILE__ ": I/O MMU @ %p is out of mapping resources\n", - ioc->ioc_hpa); + if (unlikely(pide >= (ioc->res_size << 3))) { + printk(KERN_WARNING "%s: I/O MMU @ %p is" + "out of mapping resources, %u %u %lx\n", + __func__, ioc->ioc_hpa, ioc->res_size, + pages_needed, dma_get_seg_boundary(dev)); + return -1; + } #else - panic(__FILE__ ": I/O MMU @ %p is out of mapping resources\n", - ioc->ioc_hpa); + printk(KERN_WARNING "%s: I/O MMU @ %p is" + "out of mapping resources, %u %u %lx\n", + __func__, ioc->ioc_hpa, ioc->res_size, + pages_needed, dma_get_seg_boundary(dev)); + return -1; #endif } } @@ -965,6 +972,8 @@ static dma_addr_t sba_map_page(struct device *dev, struct page *page, #endif pide = sba_alloc_range(ioc, dev, size); + if (pide < 0) + return 0; iovp = (dma_addr_t) pide << iovp_shift; @@ -1320,6 +1329,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, unsigned long dma_offset, dma_len; /* start/len of DMA stream */ int n_mappings = 0; unsigned int max_seg_size = dma_get_max_seg_size(dev); + int idx; while (nents > 0) { unsigned long vaddr = (unsigned long) sba_sg_address(startsg); @@ -1418,16 +1428,22 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, vcontig_sg->dma_length = vcontig_len; dma_len = (dma_len + dma_offset + ~iovp_mask) & iovp_mask; ASSERT(dma_len <= DMA_CHUNK_SIZE); - dma_sg->dma_address = (dma_addr_t) (PIDE_FLAG - | (sba_alloc_range(ioc, dev, dma_len) << iovp_shift) - | dma_offset); + idx = sba_alloc_range(ioc, dev, dma_len); + if (idx < 0) { + dma_sg->dma_length = 0; + return -1; + } + dma_sg->dma_address = (dma_addr_t)(PIDE_FLAG | (idx << iovp_shift) + | dma_offset); n_mappings++; } return n_mappings; } - +static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); /** * sba_map_sg - map Scatter/Gather list * @dev: instance of PCI owned by the driver that's asking. @@ -1493,6 +1509,10 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, ** Access to the virtual address is what forces a two pass algorithm. */ coalesced = sba_coalesce_chunks(ioc, dev, sglist, nents); + if (coalesced < 0) { + sba_unmap_sg_attrs(dev, sglist, nents, dir, attrs); + return 0; + } /* ** Program the I/O Pdir diff --git a/trunk/arch/ia64/ia32/elfcore32.h b/trunk/arch/ia64/ia32/elfcore32.h index 9a3abf58cea3..657725742617 100644 --- a/trunk/arch/ia64/ia32/elfcore32.h +++ b/trunk/arch/ia64/ia32/elfcore32.h @@ -11,8 +11,6 @@ #include #include -#define USE_ELF_CORE_DUMP 1 - /* Override elfcore.h */ #define _LINUX_ELFCORE_H 1 typedef unsigned int elf_greg_t; diff --git a/trunk/arch/ia64/include/asm/asm-offsets.h b/trunk/arch/ia64/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/ia64/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/ia64/include/asm/dma-mapping.h b/trunk/arch/ia64/include/asm/dma-mapping.h index 8d3c79cd81e7..7d09a09cdaad 100644 --- a/trunk/arch/ia64/include/asm/dma-mapping.h +++ b/trunk/arch/ia64/include/asm/dma-mapping.h @@ -73,7 +73,7 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) if (!dev->dma_mask) return 0; - return addr + size <= *dev->dma_mask; + return addr + size - 1 <= *dev->dma_mask; } static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) diff --git a/trunk/arch/ia64/include/asm/elf.h b/trunk/arch/ia64/include/asm/elf.h index 86eddee029cb..e14108b19c09 100644 --- a/trunk/arch/ia64/include/asm/elf.h +++ b/trunk/arch/ia64/include/asm/elf.h @@ -25,7 +25,6 @@ #define ELF_DATA ELFDATA2LSB #define ELF_ARCH EM_IA_64 -#define USE_ELF_CORE_DUMP #define CORE_DUMP_USE_REGSET /* Least-significant four bits of ELF header's e_flags are OS-specific. The bits are diff --git a/trunk/arch/ia64/include/asm/hw_irq.h b/trunk/arch/ia64/include/asm/hw_irq.h index 91619b31dbf5..bf2e37493e04 100644 --- a/trunk/arch/ia64/include/asm/hw_irq.h +++ b/trunk/arch/ia64/include/asm/hw_irq.h @@ -59,7 +59,13 @@ typedef u16 ia64_vector; extern int ia64_first_device_vector; extern int ia64_last_device_vector; +#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_DIG)) +/* Reserve the lower priority vector than device vectors for "move IRQ" IPI */ +#define IA64_IRQ_MOVE_VECTOR 0x30 /* "move IRQ" IPI */ +#define IA64_DEF_FIRST_DEVICE_VECTOR 0x31 +#else #define IA64_DEF_FIRST_DEVICE_VECTOR 0x30 +#endif #define IA64_DEF_LAST_DEVICE_VECTOR 0xe7 #define IA64_FIRST_DEVICE_VECTOR ia64_first_device_vector #define IA64_LAST_DEVICE_VECTOR ia64_last_device_vector diff --git a/trunk/arch/ia64/include/asm/io.h b/trunk/arch/ia64/include/asm/io.h index 0d9d16e2d949..cc8335eb3110 100644 --- a/trunk/arch/ia64/include/asm/io.h +++ b/trunk/arch/ia64/include/asm/io.h @@ -424,6 +424,8 @@ __writeq (unsigned long val, volatile void __iomem *addr) extern void __iomem * ioremap(unsigned long offset, unsigned long size); extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size); extern void iounmap (volatile void __iomem *addr); +extern void __iomem * early_ioremap (unsigned long phys_addr, unsigned long size); +extern void early_iounmap (volatile void __iomem *addr, unsigned long size); /* * String version of IO memory access ops: diff --git a/trunk/arch/ia64/include/asm/irq.h b/trunk/arch/ia64/include/asm/irq.h index 5282546cdf82..91b920fd7d53 100644 --- a/trunk/arch/ia64/include/asm/irq.h +++ b/trunk/arch/ia64/include/asm/irq.h @@ -13,7 +13,7 @@ #include #include -#include +#include static __inline__ int irq_canonicalize (int irq) diff --git a/trunk/arch/ia64/include/asm/mca.h b/trunk/arch/ia64/include/asm/mca.h index c171cdf0a789..43f96ab18fa0 100644 --- a/trunk/arch/ia64/include/asm/mca.h +++ b/trunk/arch/ia64/include/asm/mca.h @@ -106,6 +106,11 @@ struct ia64_sal_os_state { unsigned long os_status; /* OS status to SAL, enum below */ unsigned long context; /* 0 if return to same context 1 if return to new context */ + + /* I-resources */ + unsigned long iip; + unsigned long ipsr; + unsigned long ifs; }; enum { diff --git a/trunk/arch/ia64/include/asm/rwsem.h b/trunk/arch/ia64/include/asm/rwsem.h index fbee74b15782..e8762688e8e3 100644 --- a/trunk/arch/ia64/include/asm/rwsem.h +++ b/trunk/arch/ia64/include/asm/rwsem.h @@ -47,7 +47,7 @@ struct rw_semaphore { #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ LIST_HEAD_INIT((name).wait_list) } #define DECLARE_RWSEM(name) \ diff --git a/trunk/arch/ia64/kernel/Makefile b/trunk/arch/ia64/kernel/Makefile index 6b7edcab0cb5..2a75e937ae8d 100644 --- a/trunk/arch/ia64/kernel/Makefile +++ b/trunk/arch/ia64/kernel/Makefile @@ -81,17 +81,14 @@ define cmd_nr_irqs endef # We use internal kbuild rules to avoid the "is up to date" message from make -arch/$(SRCARCH)/kernel/nr-irqs.s: $(srctree)/arch/$(SRCARCH)/kernel/nr-irqs.c \ - $(wildcard $(srctree)/include/asm-ia64/*/irq.h) +arch/$(SRCARCH)/kernel/nr-irqs.s: arch/$(SRCARCH)/kernel/nr-irqs.c $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) -include/asm-ia64/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s +include/generated/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s $(Q)mkdir -p $(dir $@) $(call cmd,nr_irqs) -clean-files += $(objtree)/include/asm-ia64/nr-irqs.h - # # native ivt.S, entry.S and fsys.S # diff --git a/trunk/arch/ia64/kernel/irq_ia64.c b/trunk/arch/ia64/kernel/irq_ia64.c index 70e4bad23432..d4093a173a3e 100644 --- a/trunk/arch/ia64/kernel/irq_ia64.c +++ b/trunk/arch/ia64/kernel/irq_ia64.c @@ -260,7 +260,6 @@ void __setup_vector_irq(int cpu) } #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)) -#define IA64_IRQ_MOVE_VECTOR IA64_DEF_FIRST_DEVICE_VECTOR static enum vector_domain_type { VECTOR_DOMAIN_NONE, @@ -659,11 +658,8 @@ init_IRQ (void) register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL); #ifdef CONFIG_SMP #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG) - if (vector_domain_type != VECTOR_DOMAIN_NONE) { - BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR); - IA64_FIRST_DEVICE_VECTOR++; + if (vector_domain_type != VECTOR_DOMAIN_NONE) register_percpu_irq(IA64_IRQ_MOVE_VECTOR, &irq_move_irqaction); - } #endif #endif #ifdef CONFIG_PERFMON diff --git a/trunk/arch/ia64/kernel/mca.c b/trunk/arch/ia64/kernel/mca.c index 496ac7a99488..32f2639e9b0a 100644 --- a/trunk/arch/ia64/kernel/mca.c +++ b/trunk/arch/ia64/kernel/mca.c @@ -888,9 +888,10 @@ ia64_mca_modify_comm(const struct task_struct *previous_current) } static void -finish_pt_regs(struct pt_regs *regs, const pal_min_state_area_t *ms, +finish_pt_regs(struct pt_regs *regs, struct ia64_sal_os_state *sos, unsigned long *nat) { + const pal_min_state_area_t *ms = sos->pal_min_state; const u64 *bank; /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use @@ -904,6 +905,10 @@ finish_pt_regs(struct pt_regs *regs, const pal_min_state_area_t *ms, regs->cr_iip = ms->pmsa_xip; regs->cr_ipsr = ms->pmsa_xpsr; regs->cr_ifs = ms->pmsa_xfs; + + sos->iip = ms->pmsa_iip; + sos->ipsr = ms->pmsa_ipsr; + sos->ifs = ms->pmsa_ifs; } regs->pr = ms->pmsa_pr; regs->b0 = ms->pmsa_br0; @@ -1079,7 +1084,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, memcpy(old_regs, regs, sizeof(*regs)); old_regs->loadrs = loadrs; old_unat = old_regs->ar_unat; - finish_pt_regs(old_regs, ms, &old_unat); + finish_pt_regs(old_regs, sos, &old_unat); /* Next stack a struct switch_stack. mca_asm.S built a partial * switch_stack, copy it and fill in the blanks using pt_regs and @@ -1150,7 +1155,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, mprintk(KERN_INFO "cpu %d, %s %s, original stack not modified\n", smp_processor_id(), type, msg); old_unat = regs->ar_unat; - finish_pt_regs(regs, ms, &old_unat); + finish_pt_regs(regs, sos, &old_unat); return previous_current; } diff --git a/trunk/arch/ia64/kernel/perfmon.c b/trunk/arch/ia64/kernel/perfmon.c index 599b233bef75..5246285a95fb 100644 --- a/trunk/arch/ia64/kernel/perfmon.c +++ b/trunk/arch/ia64/kernel/perfmon.c @@ -2200,7 +2200,7 @@ pfm_alloc_file(pfm_context_t *ctx) { struct file *file; struct inode *inode; - struct dentry *dentry; + struct path path; char name[32]; struct qstr this; @@ -2225,18 +2225,19 @@ pfm_alloc_file(pfm_context_t *ctx) /* * allocate a new dcache entry */ - dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this); - if (!dentry) { + path.dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this); + if (!path.dentry) { iput(inode); return ERR_PTR(-ENOMEM); } + path.mnt = mntget(pfmfs_mnt); - dentry->d_op = &pfmfs_dentry_operations; - d_add(dentry, inode); + path.dentry->d_op = &pfmfs_dentry_operations; + d_add(path.dentry, inode); - file = alloc_file(pfmfs_mnt, dentry, FMODE_READ, &pfm_file_ops); + file = alloc_file(&path, FMODE_READ, &pfm_file_ops); if (!file) { - dput(dentry); + path_put(&path); return ERR_PTR(-ENFILE); } diff --git a/trunk/arch/ia64/kvm/asm-offsets.c b/trunk/arch/ia64/kvm/asm-offsets.c index 0c3564a7a033..9324c875caf5 100644 --- a/trunk/arch/ia64/kvm/asm-offsets.c +++ b/trunk/arch/ia64/kvm/asm-offsets.c @@ -22,7 +22,6 @@ * */ -#include #include #include diff --git a/trunk/arch/ia64/mm/ioremap.c b/trunk/arch/ia64/mm/ioremap.c index 2a140627dfd6..3dccdd8eb275 100644 --- a/trunk/arch/ia64/mm/ioremap.c +++ b/trunk/arch/ia64/mm/ioremap.c @@ -21,6 +21,12 @@ __ioremap (unsigned long phys_addr) return (void __iomem *) (__IA64_UNCACHED_OFFSET | phys_addr); } +void __iomem * +early_ioremap (unsigned long phys_addr, unsigned long size) +{ + return __ioremap(phys_addr); +} + void __iomem * ioremap (unsigned long phys_addr, unsigned long size) { @@ -101,6 +107,11 @@ ioremap_nocache (unsigned long phys_addr, unsigned long size) } EXPORT_SYMBOL(ioremap_nocache); +void +early_iounmap (volatile void __iomem *addr, unsigned long size) +{ +} + void iounmap (volatile void __iomem *addr) { diff --git a/trunk/arch/ia64/sn/pci/tioca_provider.c b/trunk/arch/ia64/sn/pci/tioca_provider.c index 35b2a27d2e77..efb454534e52 100644 --- a/trunk/arch/ia64/sn/pci/tioca_provider.c +++ b/trunk/arch/ia64/sn/pci/tioca_provider.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -369,7 +370,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr) static dma_addr_t tioca_dma_mapped(struct pci_dev *pdev, unsigned long paddr, size_t req_size) { - int i, ps, ps_shift, entry, entries, mapsize, last_entry; + int ps, ps_shift, entry, entries, mapsize; u64 xio_addr, end_xio_addr; struct tioca_common *tioca_common; struct tioca_kernel *tioca_kern; @@ -410,23 +411,13 @@ tioca_dma_mapped(struct pci_dev *pdev, unsigned long paddr, size_t req_size) map = tioca_kern->ca_pcigart_pagemap; mapsize = tioca_kern->ca_pcigart_entries; - entry = find_first_zero_bit(map, mapsize); - while (entry < mapsize) { - last_entry = find_next_bit(map, mapsize, entry); - - if (last_entry - entry >= entries) - break; - - entry = find_next_zero_bit(map, mapsize, last_entry); - } - - if (entry > mapsize) { + entry = bitmap_find_next_zero_area(map, mapsize, 0, entries, 0); + if (entry >= mapsize) { kfree(ca_dmamap); goto map_return; } - for (i = 0; i < entries; i++) - set_bit(entry + i, map); + bitmap_set(map, entry, entries); bus_addr = tioca_kern->ca_pciap_base + (entry * ps); diff --git a/trunk/arch/m32r/include/asm/elf.h b/trunk/arch/m32r/include/asm/elf.h index 0cc34c94bf2b..2f85412ef730 100644 --- a/trunk/arch/m32r/include/asm/elf.h +++ b/trunk/arch/m32r/include/asm/elf.h @@ -102,7 +102,6 @@ typedef elf_fpreg_t elf_fpregset_t; */ #define ELF_PLAT_INIT(_r, load_addr) (_r)->r0 = 0 -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE PAGE_SIZE /* diff --git a/trunk/arch/m68k/include/asm/asm-offsets.h b/trunk/arch/m68k/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/m68k/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/m68k/include/asm/elf.h b/trunk/arch/m68k/include/asm/elf.h index 0b0f49eb876b..01c193d91412 100644 --- a/trunk/arch/m68k/include/asm/elf.h +++ b/trunk/arch/m68k/include/asm/elf.h @@ -59,7 +59,6 @@ typedef struct user_m68kfp_struct elf_fpregset_t; is actually used on ASV. */ #define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 -#define USE_ELF_CORE_DUMP #ifndef CONFIG_SUN3 #define ELF_EXEC_PAGESIZE 4096 #else diff --git a/trunk/arch/m68k/kernel/head.S b/trunk/arch/m68k/kernel/head.S index 86edb5fbcfc3..ef54128baa0b 100644 --- a/trunk/arch/m68k/kernel/head.S +++ b/trunk/arch/m68k/kernel/head.S @@ -196,7 +196,7 @@ * for them and trying to understand what they mean. * * CONFIG_xxx: These are the obvious machine configuration defines created - * during configuration. These are defined in include/linux/autoconf.h. + * during configuration. These are defined in autoconf.h. * * CONSOLE: There is support for head.S console in this file. This * console can talk to a Mac frame buffer, but could easily be extrapolated diff --git a/trunk/arch/microblaze/include/asm/asm-offsets.h b/trunk/arch/microblaze/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/microblaze/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/microblaze/include/asm/elf.h b/trunk/arch/microblaze/include/asm/elf.h index f92fc0dda006..7d4acf2b278e 100644 --- a/trunk/arch/microblaze/include/asm/elf.h +++ b/trunk/arch/microblaze/include/asm/elf.h @@ -77,7 +77,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define ELF_DATA ELFDATA2MSB #endif -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 diff --git a/trunk/arch/mips/Kconfig b/trunk/arch/mips/Kconfig index fd7620f025fa..9541171f1220 100644 --- a/trunk/arch/mips/Kconfig +++ b/trunk/arch/mips/Kconfig @@ -5,9 +5,12 @@ config MIPS select HAVE_IDE select HAVE_OPROFILE select HAVE_ARCH_KGDB - # Horrible source of confusion. Die, die, die ... - select EMBEDDED - select RTC_LIB if !LEMOTE_FULOONG2E + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_GRAPH_TRACER + select RTC_LIB if !MACH_LOONGSON mainmenu "Linux/MIPS Kernel Configuration" @@ -22,6 +25,7 @@ choice config MACH_ALCHEMY bool "Alchemy processor based machines" + select SYS_SUPPORTS_ZBOOT config AR7 bool "Texas Instruments AR7" @@ -36,6 +40,7 @@ config AR7 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT_UART16550 select GENERIC_GPIO select GCD select VLYNQ @@ -43,23 +48,6 @@ config AR7 Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. -config BASLER_EXCITE - bool "Basler eXcite smart camera" - select CEVT_R4K - select CSRC_R4K - select DMA_COHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_CPU_RM9K - select MIPS_RM9122 - select SYS_HAS_CPU_RM9000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - help - The eXcite is a smart camera platform manufactured by - Basler Vision Technologies AG. - config BCM47XX bool "BCM47XX based boards" select CEVT_R4K @@ -192,6 +180,7 @@ config LASAT config MACH_LOONGSON bool "Loongson family of machines" + select SYS_SUPPORTS_ZBOOT_UART16550 help This enables the support of Loongson family of machines. @@ -233,6 +222,7 @@ config MIPS_MALTA select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS + select SYS_SUPPORTS_ZBOOT help This enables support for the MIPS Technologies Malta evaluation board. @@ -334,6 +324,24 @@ config PMC_YOSEMITE Yosemite is an evaluation board for the RM9000x2 processor manufactured by PMC-Sierra. +config POWERTV + bool "Cisco PowerTV" + select BOOT_ELF32 + select CEVT_R4K + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select CSRC_POWERTV + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select USB_OHCI_LITTLE_ENDIAN + help + This enables support for the Cisco PowerTV Platform. + config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" select ARC @@ -674,11 +682,11 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice source "arch/mips/alchemy/Kconfig" -source "arch/mips/basler/excite/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" +source "arch/mips/powertv/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" @@ -778,6 +786,9 @@ config CSRC_BCM1480 config CSRC_IOASIC bool +config CSRC_POWERTV + bool + config CSRC_R4K_LIB bool @@ -806,20 +817,6 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool -config EARLY_PRINTK - bool "Early printk" if EMBEDDED && DEBUG_KERNEL - depends on SYS_HAS_EARLY_PRINTK - default y - help - This option enables special console drivers which allow the kernel - to print messages very early in the bootup process. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. For normal operation, - it is not recommended because it looks ugly on some machines and - doesn't cooperate with an X server. You should normally say N here, - unless you want to debug such a crash. - config SYS_HAS_EARLY_PRINTK bool @@ -1069,6 +1066,21 @@ config CPU_LOONGSON2E The Loongson 2E processor implements the MIPS III instruction set with many extensions. + It has an internal FPGA northbridge, which is compatiable to + bonito64. + +config CPU_LOONGSON2F + bool "Loongson 2F" + depends on SYS_HAS_CPU_LOONGSON2F + select CPU_LOONGSON2 + help + The Loongson 2F processor implements the MIPS III instruction set + with many extensions. + + Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller + have a similar programming interface with FPGA northbridge used in + Loongson2E. + config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 @@ -1294,6 +1306,16 @@ config CPU_CAVIUM_OCTEON endchoice +config SYS_SUPPORTS_ZBOOT + bool + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA + +config SYS_SUPPORTS_ZBOOT_UART16550 + bool + select SYS_SUPPORTS_ZBOOT + config CPU_LOONGSON2 bool select CPU_SUPPORTS_32BIT_KERNEL @@ -1303,6 +1325,12 @@ config CPU_LOONGSON2 config SYS_HAS_CPU_LOONGSON2E bool +config SYS_HAS_CPU_LOONGSON2F + bool + select CPU_SUPPORTS_CPUFREQ + select CPU_SUPPORTS_ADDRWINCFG if 64BIT + select CPU_SUPPORTS_UNCACHED_ACCELERATED + config SYS_HAS_CPU_MIPS32_R1 bool @@ -1411,8 +1439,17 @@ config CPU_SUPPORTS_32BIT_KERNEL bool config CPU_SUPPORTS_64BIT_KERNEL bool +config CPU_SUPPORTS_CPUFREQ + bool +config CPU_SUPPORTS_ADDRWINCFG + bool config CPU_SUPPORTS_HUGEPAGES bool +config CPU_SUPPORTS_UNCACHED_ACCELERATED + bool +config MIPS_PGD_C0_CONTEXT + bool + default y if 64BIT && CPU_MIPSR2 # # Set to y for ptrace access to watch registers. @@ -2024,15 +2061,6 @@ config STACKTRACE_SUPPORT source "init/Kconfig" -config PROBE_INITRD_HEADER - bool "Probe initrd header created by addinitrd" - depends on BLK_DEV_INITRD - help - Probe initrd header at the last page of kernel image. - Say Y here if you are using arch/mips/boot/addinitrd.c to - add initrd or initramfs image to the kernel image. - Otherwise, say N. - source "kernel/Kconfig.freezer" menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" @@ -2104,6 +2132,7 @@ config MMU config I8253 bool + select MIPS_EXTERNAL_TIMER config ZONE_DMA32 bool @@ -2180,6 +2209,8 @@ source "kernel/power/Kconfig" endmenu +source "arch/mips/kernel/cpufreq/Kconfig" + source "net/Kconfig" source "drivers/Kconfig" diff --git a/trunk/arch/mips/Kconfig.debug b/trunk/arch/mips/Kconfig.debug index 364ca8938807..d2b88a0be519 100644 --- a/trunk/arch/mips/Kconfig.debug +++ b/trunk/arch/mips/Kconfig.debug @@ -6,15 +6,66 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" +config EARLY_PRINTK + bool "Early printk" if EMBEDDED + depends on SYS_HAS_EARLY_PRINTK + default y + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation, + it is not recommended because it looks ugly on some machines and + doesn't cooperate with an X server. You should normally say N here, + unless you want to debug such a crash. + +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + help + For most systems, it is firmware or second stage bootloader that + by default specifies the kernel command line options. However, + it might be necessary or advantageous to either override the + default kernel command line or add a few extra options to it. + For such cases, this option allows you to hardcode your own + command line options directly into the kernel. For that, you + should choose 'Y' here, and fill in the extra boot arguments + in CONFIG_CMDLINE. + + The built-in options will be concatenated to the default command + line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default + command line will be ignored and replaced by the built-in string. + + Most MIPS systems will normally expect 'N' here and rely upon + the command line from the firmware or the second-stage bootloader. + config CMDLINE string "Default kernel command string" + depends on CMDLINE_BOOL default "" help On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - other cases you can specify kernel args so that you don't have - to set them up in board prom initialization routines. + pass arguments to the kernel. For these platforms, and for the cases + when you want to add some extra options to the command line or ignore + the default command line, you can supply some command-line options at + build time by entering them here. In other cases you can specify + kernel args so that you don't have to set them up in board prom + initialization routines. + + For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE + options. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides firware arguments" + default n + depends on CMDLINE_BOOL + help + By setting this option to 'Y' you will have your kernel ignore + command line arguments from firmware or second stage bootloader. + Instead, the built-in command line will be used exclusively. + + Normally, you will choose 'N' here. config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" diff --git a/trunk/arch/mips/Makefile b/trunk/arch/mips/Makefile index 77f5021218d3..1893efd43fca 100644 --- a/trunk/arch/mips/Makefile +++ b/trunk/arch/mips/Makefile @@ -48,7 +48,16 @@ ifneq ($(SUBARCH),$(ARCH)) endif endif +ifndef CONFIG_FUNCTION_TRACER cflags-y := -ffunction-sections +endif +ifdef CONFIG_FUNCTION_GRAPH_TRACER + ifndef KBUILD_MCOUNT_RA_ADDRESS + ifeq ($(call cc-option-yn,-mmcount-ra-address), y) + cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS + endif + endif +endif cflags-y += $(call cc-option, -mno-check-zero-division) ifdef CONFIG_32BIT @@ -69,6 +78,7 @@ endif all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32) all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64) +all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz # # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel @@ -124,6 +134,8 @@ cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap cflags-$(CONFIG_CPU_LOONGSON2E) += \ $(call cc-option,-march=loongson2e,-march=r4600) +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=r4600) cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap @@ -324,6 +336,7 @@ core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/ cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \ -mno-branch-likely load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 +load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000 # # MIPS Malta board @@ -331,7 +344,7 @@ load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 -all-$(CONFIG_MIPS_MALTA) := vmlinux.bin +all-$(CONFIG_MIPS_MALTA) := vmlinuz.bin # # MIPS SIM @@ -355,13 +368,6 @@ core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/ cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 -# -# Basler eXcite -# -core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ -cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite -load-$(CONFIG_BASLER_EXCITE) += 0x80100000 - # # LASAT platforms # @@ -440,6 +446,13 @@ cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/ load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000 +# +# Cisco PowerTV Platform +# +core-$(CONFIG_POWERTV) += arch/mips/powertv/ +cflags-$(CONFIG_POWERTV) += -I$(srctree)/arch/mips/include/asm/mach-powertv +load-$(CONFIG_POWERTV) += 0xffffffff90800000 + # # SGI IP22 (Indy/Indigo2) # @@ -581,7 +594,7 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80600000 else load-$(CONFIG_SNI_RM) += 0xffffffff80030000 endif -all-$(CONFIG_SNI_RM) := vmlinux.ecoff +all-$(CONFIG_SNI_RM) := vmlinuz.ecoff # # Common TXx9 @@ -699,9 +712,23 @@ vmlinux.64: vmlinux $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1) +makezboot =$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ + VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $(1) all: $(all-y) +vmlinuz: vmlinux FORCE + +@$(call makezboot,$@) + +vmlinuz.bin: vmlinux + +@$(call makezboot,$@) + +vmlinuz.ecoff: vmlinux + +@$(call makezboot,$@) + +vmlinuz.srec: vmlinux + +@$(call makezboot,$@) + vmlinux.bin: $(vmlinux-32) +@$(call makeboot,$@) @@ -726,11 +753,13 @@ endif install: $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) + $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE) $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) archclean: @$(MAKE) $(clean)=arch/mips/boot + @$(MAKE) $(clean)=arch/mips/boot/compressed @$(MAKE) $(clean)=arch/mips/lasat define archhelp @@ -738,10 +767,18 @@ define archhelp echo ' vmlinux.ecoff - ECOFF boot image' echo ' vmlinux.bin - Raw binary boot image' echo ' vmlinux.srec - SREC boot image' + echo ' vmlinuz - Compressed boot(zboot) image' + echo ' vmlinuz.ecoff - ECOFF zboot image' + echo ' vmlinuz.bin - Raw binary zboot image' + echo ' vmlinuz.srec - SREC zboot image' echo echo ' These will be default as apropriate for a configured platform.' endef CLEAN_FILES += vmlinux.32 \ vmlinux.64 \ - vmlinux.ecoff + vmlinux.ecoff \ + vmlinuz \ + vmlinuz.ecoff \ + vmlinuz.bin \ + vmlinuz.srec diff --git a/trunk/arch/mips/ar7/platform.c b/trunk/arch/mips/ar7/platform.c index 835f3f0319ca..85169c08d8dc 100644 --- a/trunk/arch/mips/ar7/platform.c +++ b/trunk/arch/mips/ar7/platform.c @@ -505,7 +505,7 @@ static int __init ar7_register_devices(void) int res; u32 *bootcr, val; #ifdef CONFIG_SERIAL_8250 - static struct uart_port uart_port[2]; + static struct uart_port uart_port[2] __initdata; memset(uart_port, 0, sizeof(struct uart_port) * 2); diff --git a/trunk/arch/mips/basler/excite/Kconfig b/trunk/arch/mips/basler/excite/Kconfig deleted file mode 100644 index ba506075608b..000000000000 --- a/trunk/arch/mips/basler/excite/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -config BASLER_EXCITE_PROTOTYPE - bool "Support for pre-release units" - depends on BASLER_EXCITE - default n - help - Pre-series (prototype) units are different from later ones in - some ways. Select this option if you have one of these. Please - note that a kernel built with this option selected will not be - able to run on normal units. diff --git a/trunk/arch/mips/basler/excite/Makefile b/trunk/arch/mips/basler/excite/Makefile deleted file mode 100644 index cff29cf46d03..000000000000 --- a/trunk/arch/mips/basler/excite/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Basler eXcite -# - -obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ - excite_device.o excite_procfs.o - -obj-m += excite_iodev.o diff --git a/trunk/arch/mips/basler/excite/excite_device.c b/trunk/arch/mips/basler/excite/excite_device.c deleted file mode 100644 index e00bc2d7f301..000000000000 --- a/trunk/arch/mips/basler/excite/excite_device.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "excite_iodev.h" - -#define RM9K_GE_UNIT 0 -#define XICAP_UNIT 0 -#define NAND_UNIT 0 - -#define DLL_TIMEOUT 3 /* seconds */ - - -#define RINIT(__start__, __end__, __name__, __parent__) { \ - .name = __name__ "_0", \ - .start = (__start__), \ - .end = (__end__), \ - .flags = 0, \ - .parent = (__parent__) \ -} - -#define RINIT_IRQ(__irq__, __name__) { \ - .name = __name__ "_0", \ - .start = (__irq__), \ - .end = (__irq__), \ - .flags = IORESOURCE_IRQ, \ - .parent = NULL \ -} - - - -enum { - slice_xicap, - slice_eth -}; - - - -static struct resource - excite_ctr_resource __maybe_unused = { - .name = "GPI counters", - .start = 0, - .end = 5, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_gpislice_resource __maybe_unused = { - .name = "GPI slices", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_mdio_channel_resource __maybe_unused = { - .name = "MDIO channels", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fifomem_resource __maybe_unused = { - .name = "FIFO memory", - .start = 0, - .end = 767, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_scram_resource __maybe_unused = { - .name = "Scratch RAM", - .start = EXCITE_PHYS_SCRAM, - .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fpga_resource __maybe_unused = { - .name = "System FPGA", - .start = EXCITE_PHYS_FPGA, - .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_nand_resource __maybe_unused = { - .name = "NAND flash control", - .start = EXCITE_PHYS_NAND, - .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_titan_resource __maybe_unused = { - .name = "TITAN registers", - .start = EXCITE_PHYS_TITAN, - .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }; - - - -static void adjust_resources(struct resource *res, unsigned int n) -{ - struct resource *p; - const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA; - - for (p = res; p < res + n; p++) { - const struct resource * const parent = p->parent; - if (parent) { - p->start += parent->start; - p->end += parent->start; - p->flags = parent->flags & mask; - } - } -} - - - -#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) -static struct resource xicap_rsrc[] = { - RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource), - RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource), - RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource), - RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ) -}; - -static struct platform_device xicap_pdev = { - .name = XICAP_NAME, - .id = XICAP_UNIT, - .num_resources = ARRAY_SIZE(xicap_rsrc), - .resource = xicap_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init xicap_devinit(void) -{ - unsigned long tend; - u32 reg; - int retval; - - adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11100 << slice_xicap); - titan_writel(reg, CPTC1R); - - /* Enable slice & DLL. */ - reg= titan_readl(CPRR); - reg &= ~(0x00030003 << (slice_xicap * 2)); - titan_writel(reg, CPRR); - - /* Wait for DLLs to lock */ - tend = jiffies + DLL_TIMEOUT * HZ; - while (time_before(jiffies, tend)) { - if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4)))) - break; - yield(); - } - - if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) { - printk(KERN_ERR "%s: DLL not locked after %u seconds\n", - xicap_pdev.name, DLL_TIMEOUT); - retval = -ETIME; - } else { - /* Register platform device */ - retval = platform_device_register(&xicap_pdev); - } - - return retval; -} - -device_initcall(xicap_devinit); -#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */ - - - -#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) -static struct resource wdt_rsrc[] = { - RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource), - RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource), - RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ) -}; - -static struct platform_device wdt_pdev = { - .name = WDT_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(wdt_rsrc), - .resource = wdt_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init wdt_devinit(void) -{ - adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc)); - return platform_device_register(&wdt_pdev); -} - -device_initcall(wdt_devinit); -#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */ - - - -static struct resource excite_nandflash_rsrc[] = { - RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource) -}; - -static struct platform_device excite_nandflash_pdev = { - .name = "excite_nand", - .id = NAND_UNIT, - .num_resources = ARRAY_SIZE(excite_nandflash_rsrc), - .resource = excite_nandflash_rsrc -}; - -/* - * Create a platform device for the access to the nand-flash - * port - */ -static int __init excite_nandflash_devinit(void) -{ - adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc)); - - /* nothing to be done here */ - - /* Register platform device */ - return platform_device_register(&excite_nandflash_pdev); -} - -device_initcall(excite_nandflash_devinit); - - - -static struct resource iodev_rsrc[] = { - RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ) -}; - -static struct platform_device io_pdev = { - .name = IODEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(iodev_rsrc), - .resource = iodev_rsrc -}; - -/* - * Create a platform device for the external I/O ports. - */ -static int __init io_devinit(void) -{ - adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc)); - return platform_device_register(&io_pdev); -} - -device_initcall(io_devinit); - - - - -#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) -static struct resource rm9k_ge_rsrc[] = { - RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource), - RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource), - RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource), - RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource), - RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource), - RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource), - RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource), - RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource), - RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN), - RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY) -}; - -static struct platform_device rm9k_ge_pdev = { - .name = RM9K_GE_NAME, - .id = RM9K_GE_UNIT, - .num_resources = ARRAY_SIZE(rm9k_ge_rsrc), - .resource = rm9k_ge_rsrc -}; - - - -/* - * Create a platform device for the Ethernet port. - */ -static int __init rm9k_ge_devinit(void) -{ - u32 reg; - - adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11000 << slice_eth); - reg |= 0x100 << slice_eth; - titan_writel(reg, CPTC1R); - - /* Take the MAC out of reset, reset the DLLs. */ - reg = titan_readl(CPRR); - reg &= ~(0x00030000 << (slice_eth * 2)); - reg |= 0x3 << (slice_eth * 2); - titan_writel(reg, CPRR); - - return platform_device_register(&rm9k_ge_pdev); -} - -device_initcall(rm9k_ge_devinit); -#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */ - - - -static int __init excite_setup_devs(void) -{ - int res; - u32 reg; - - /* Enable xdma and fifo interrupts */ - reg = titan_readl(0x0050); - titan_writel(reg | 0x18000000, 0x0050); - - res = request_resource(&iomem_resource, &excite_titan_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_scram_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_fpga_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_nand_resource); - if (res) - return res; - excite_fpga_resource.flags = excite_fpga_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - excite_nand_resource.flags = excite_nand_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - - return 0; -} - -arch_initcall(excite_setup_devs); - diff --git a/trunk/arch/mips/basler/excite/excite_iodev.c b/trunk/arch/mips/basler/excite/excite_iodev.c deleted file mode 100644 index 938b1d0b7652..000000000000 --- a/trunk/arch/mips/basler/excite/excite_iodev.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "excite_iodev.h" - - - -static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); -static int __init iodev_probe(struct platform_device *); -static int __exit iodev_remove(struct platform_device *); -static int iodev_open(struct inode *, struct file *); -static int iodev_release(struct inode *, struct file *); -static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); -static unsigned int iodev_poll(struct file *, struct poll_table_struct *); -static irqreturn_t iodev_irqhdl(int, void *); - - - -static const char iodev_name[] = "iodev"; -static unsigned int iodev_irq; -static DECLARE_WAIT_QUEUE_HEAD(wq); - - - -static const struct file_operations fops = -{ - .owner = THIS_MODULE, - .open = iodev_open, - .release = iodev_release, - .read = iodev_read, - .poll = iodev_poll -}; - -static struct miscdevice miscdev = -{ - .minor = MISC_DYNAMIC_MINOR, - .name = iodev_name, - .fops = &fops -}; - -static struct platform_driver iodev_driver = { - .driver = { - .name = iodev_name, - .owner = THIS_MODULE, - }, - .probe = iodev_probe, - .remove = __devexit_p(iodev_remove), -}; - - - -static const struct resource * -iodev_get_resource(struct platform_device *pdv, const char *name, - unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - - - -/* No hotplugging on the platform bus - use __init */ -static int __init iodev_probe(struct platform_device *dev) -{ - const struct resource * const ri = - iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); - - if (unlikely(!ri)) - return -ENXIO; - - iodev_irq = ri->start; - return misc_register(&miscdev); -} - - - -static int __exit iodev_remove(struct platform_device *dev) -{ - return misc_deregister(&miscdev); -} - -static int iodev_open(struct inode *i, struct file *f) -{ - int ret; - - ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED, - iodev_name, &miscdev); - - return ret; -} - -static int iodev_release(struct inode *i, struct file *f) -{ - free_irq(iodev_irq, &miscdev); - return 0; -} - - - - -static ssize_t -iodev_read(struct file *f, char __user *d, size_t s, loff_t *o) -{ - ssize_t ret; - DEFINE_WAIT(w); - - prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE); - if (!signal_pending(current)) - schedule(); - ret = signal_pending(current) ? -ERESTARTSYS : 0; - finish_wait(&wq, &w); - return ret; -} - - -static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p) -{ - poll_wait(f, &wq, p); - return POLLOUT | POLLWRNORM; -} - -static irqreturn_t iodev_irqhdl(int irq, void *ctxt) -{ - wake_up(&wq); - - return IRQ_HANDLED; -} - -static int __init iodev_init_module(void) -{ - return platform_driver_register(&iodev_driver); -} - - - -static void __exit iodev_cleanup_module(void) -{ - platform_driver_unregister(&iodev_driver); -} - -module_init(iodev_init_module); -module_exit(iodev_cleanup_module); - - - -MODULE_AUTHOR("Thomas Koeller "); -MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler"); -MODULE_VERSION("0.0"); -MODULE_LICENSE("GPL"); diff --git a/trunk/arch/mips/basler/excite/excite_iodev.h b/trunk/arch/mips/basler/excite/excite_iodev.h deleted file mode 100644 index cbfbb5d2ee62..000000000000 --- a/trunk/arch/mips/basler/excite/excite_iodev.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __EXCITE_IODEV_H__ -#define __EXCITE_IODEV_H__ - -/* Device name */ -#define IODEV_NAME "iodev" - -/* Resource names */ -#define IODEV_RESOURCE_IRQ "excite_iodev_irq" - -#endif /* __EXCITE_IODEV_H__ */ diff --git a/trunk/arch/mips/basler/excite/excite_irq.c b/trunk/arch/mips/basler/excite/excite_irq.c deleted file mode 100644 index 934e0a6b1011..000000000000 --- a/trunk/arch/mips/basler/excite/excite_irq.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (C) by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -extern asmlinkage void excite_handle_int(void); - -/* - * Initialize the interrupt handler - */ -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); - rm7k_cpu_irq_init(); - rm9k_cpu_irq_init(); -} - -asmlinkage void plat_irq_dispatch(void) -{ - const u32 - interrupts = read_c0_cause() >> 8, - mask = ((read_c0_status() >> 8) & 0x000000ff) | - (read_c0_intcontrol() & 0x0000ff00), - pending = interrupts & mask; - u32 msgintflags, msgintmask, msgint; - - /* process timer interrupt */ - if (pending & (1 << TIMER_IRQ)) { - do_IRQ(TIMER_IRQ); - return; - } - - /* Process PCI interrupts */ -#if USB_IRQ < 10 - msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20)); - if ((pending & (1 << USB_IRQ)) && msgint) { -#else - if (pending & (1 << USB_IRQ)) { -#endif - do_IRQ(USB_IRQ); - return; - } - - /* Process TITAN interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); - if ((pending & (1 << TITAN_IRQ)) && msgint) { - ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); - do_IRQ(TITAN_IRQ); - return; - } - - /* Process FPGA line #0 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20)); - if ((pending & (1 << FPGA0_IRQ)) && msgint) { - do_IRQ(FPGA0_IRQ); - return; - } - - /* Process FPGA line #1 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20)); - if ((pending & (1 << FPGA1_IRQ)) && msgint) { - do_IRQ(FPGA1_IRQ); - return; - } - - /* Process PHY interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20)); - if ((pending & (1 << PHY_IRQ)) && msgint) { - do_IRQ(PHY_IRQ); - return; - } - - /* Process spurious interrupts */ - spurious_interrupt(); -} diff --git a/trunk/arch/mips/basler/excite/excite_procfs.c b/trunk/arch/mips/basler/excite/excite_procfs.c deleted file mode 100644 index 08923e6825b5..000000000000 --- a/trunk/arch/mips/basler/excite/excite_procfs.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * Procfs support for Basler eXcite - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static int excite_unit_id_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%06x", unit_id); - return 0; -} - -static int excite_unit_id_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, excite_unit_id_proc_show, NULL); -} - -static const struct file_operations excite_unit_id_proc_fops = { - .owner = THIS_MODULE, - .open = excite_unit_id_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int -excite_bootrom_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - void __iomem * src; - - if (off >= EXCITE_SIZE_BOOTROM) { - *eof = 1; - return 0; - } - - if ((off + count) > EXCITE_SIZE_BOOTROM) - count = EXCITE_SIZE_BOOTROM - off; - - src = ioremap(EXCITE_PHYS_BOOTROM + off, count); - if (src) { - memcpy_fromio(page, src, count); - iounmap(src); - *start = page; - } else { - count = -ENOMEM; - } - - return count; -} - -void excite_procfs_init(void) -{ - /* Create & populate /proc/excite */ - struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL); - if (pdir) { - struct proc_dir_entry * e; - - e = proc_create("unit_id", S_IRUGO, pdir, - &excite_unit_id_proc_fops); - if (e) e->size = 6; - - e = create_proc_read_entry("bootrom", S_IRUGO, pdir, - excite_bootrom_read, NULL); - if (e) e->size = EXCITE_SIZE_BOOTROM; - } -} diff --git a/trunk/arch/mips/basler/excite/excite_prom.c b/trunk/arch/mips/basler/excite/excite_prom.c deleted file mode 100644 index 68d8bc597e34..000000000000 --- a/trunk/arch/mips/basler/excite/excite_prom.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com) - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* This struct is used by Redboot to pass arguments to the kernel */ -typedef struct -{ - char *name; - char *val; -} t_env_var; - -struct parmblock { - t_env_var memsize; - t_env_var modetty0; - t_env_var ethaddr; - t_env_var env_end; - char *argv[2]; - char text[0]; -}; - -static unsigned int prom_argc; -static const char ** prom_argv; -static const t_env_var * prom_env; - -static void prom_halt(void) __attribute__((noreturn)); -static void prom_exit(void) __attribute__((noreturn)); - - - -const char *get_system_type(void) -{ - return "Basler eXcite"; -} - -/* - * Halt the system - */ -static void prom_halt(void) -{ - printk(KERN_NOTICE "\n** System halted.\n"); - while (1) - asm volatile ( - "\t.set\tmips3\n" - "\twait\n" - "\t.set\tmips0\n" - ); -} - -/* - * Reset the CPU and re-enter Redboot - */ -static void prom_exit(void) -{ - unsigned int i; - volatile unsigned char * const flg = - (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR); - - /* Clear the watchdog reset flag, set the reboot flag */ - *flg &= ~0x01; - *flg |= 0x80; - - for (i = 0; i < 10; i++) { - *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02; - iob(); - mdelay(1000); - } - - printk(KERN_NOTICE "Reset failed\n"); - prom_halt(); -} - -static const char __init *prom_getenv(char *name) -{ - const t_env_var * p; - for (p = prom_env; p->name != NULL; p++) - if(strcmp(name, p->name) == 0) - break; - return p->val; -} - -/* - * Init routine which accepts the variables from Redboot - */ -void __init prom_init(void) -{ - const struct parmblock * const pb = (struct parmblock *) fw_arg2; - - prom_argc = fw_arg0; - prom_argv = (const char **) fw_arg1; - prom_env = &pb->memsize; - - /* Callbacks for halt, restart */ - _machine_restart = (void (*)(char *)) prom_exit; - _machine_halt = prom_halt; - -#ifdef CONFIG_32BIT - /* copy command line */ - strcpy(arcs_cmdline, prom_argv[1]); - memsize = simple_strtol(prom_getenv("memsize"), NULL, 16); - strcpy(modetty, prom_getenv("modetty0")); -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT -# error 64 bit support not implemented -#endif /* CONFIG_64BIT */ -} - -/* This is called from free_initmem(), so we need to provide it */ -void __init prom_free_prom_memory(void) -{ - /* Nothing to do */ -} diff --git a/trunk/arch/mips/basler/excite/excite_setup.c b/trunk/arch/mips/basler/excite/excite_setup.c deleted file mode 100644 index d66b3b8edf2a..000000000000 --- a/trunk/arch/mips/basler/excite/excite_setup.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define TITAN_UART_CLK 25000000 - -#if 1 -/* normal serial port assignment */ -#define REGBASE_SER0 0x0208 -#define REGBASE_SER1 0x0238 -#define MASK_SER0 0x1 -#define MASK_SER1 0x2 -#else -/* serial ports swapped */ -#define REGBASE_SER0 0x0238 -#define REGBASE_SER1 0x0208 -#define MASK_SER0 0x2 -#define MASK_SER1 0x1 -#endif - -unsigned long memsize; -char modetty[30]; -unsigned int titan_irq = TITAN_IRQ; -static void __iomem * ctl_regs; -u32 unit_id; - -volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD); -volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN); - -/* Protect access to shared GPI registers */ -DEFINE_SPINLOCK(titan_lock); -int titan_irqflags; - - -/* - * The eXcite platform uses the alternate timer interrupt - * - * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how - * to handle the alternate timer interrupt of the RM9000. - */ -void __init plat_time_init(void) -{ - const u32 modebit5 = ocd_readl(0x00e4); - unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2; - unsigned int div = ((modebit5 >> 16) & 0x1f) + 2; - - if (div == 33) - div = 1; - mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2; -} - -static int __init excite_init_console(void) -{ -#if defined(CONFIG_SERIAL_8250) - static __initdata char serr[] = - KERN_ERR "Serial port #%u setup failed\n"; - struct uart_port up; - - /* Take the DUART out of reset */ - titan_writel(0x00ff1cff, CPRR); - -#if (CONFIG_SERIAL_8250_NR_UARTS > 1) - /* Enable both ports */ - titan_writel(MASK_SER0 | MASK_SER1, UACFG); -#else - /* Enable port #0 only */ - titan_writel(MASK_SER0, UACFG); -#endif - - /* - * Set up serial port #0. Do not use autodetection; the result is - * not what we want. - */ - memset(&up, 0, sizeof(up)); - up.membase = (char *) titan_addr(REGBASE_SER0); - up.irq = TITAN_IRQ; - up.uartclk = TITAN_UART_CLK; - up.regshift = 0; - up.iotype = UPIO_RM9000; - up.type = PORT_RM9000; - up.flags = UPF_SHARE_IRQ; - up.line = 0; - if (early_serial_setup(&up)) - printk(serr, up.line); - -#if CONFIG_SERIAL_8250_NR_UARTS > 1 - /* And now for port #1. */ - up.membase = (char *) titan_addr(REGBASE_SER1); - up.line = 1; - if (early_serial_setup(&up)) - printk(serr, up.line); -#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */ -#else - /* Leave the DUART in reset */ - titan_writel(0x00ff3cff, CPRR); -#endif /* defined(CONFIG_SERIAL_8250) */ - - return 0; -} - -static int __init excite_platform_init(void) -{ - unsigned int i; - unsigned char buf[3]; - u8 reg; - void __iomem * dpr; - - /* BIU buffer allocations */ - ocd_writel(8, CPURSLMT); /* CPU */ - titan_writel(4, CPGRWL); /* GPI / Ethernet */ - - /* Map control registers located in FPGA */ - ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16); - if (!ctl_regs) - panic("eXcite: failed to map platform control registers\n"); - memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf)); - unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16); - - /* Clear the reboot flag */ - dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1); - reg = __raw_readb(dpr); - __raw_writeb(reg & 0x7f, dpr); - iounmap(dpr); - - /* Interrupt controller setup */ - for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) { - ocd_writel(0x00000000, i + 0x04); - ocd_writel(0xffffffff, i + 0x0c); - } - ocd_writel(0x2, NMICONFIG); - - ocd_writel(0x1 << (TITAN_MSGINT % 0x20), - INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA0_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA1_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))); - ocd_writel((0x1 << (PHY_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))); -#if USB_IRQ < 10 - ocd_writel((0x1 << (USB_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))); -#endif - /* Enable the packet FIFO, XDMA and XDMA arbiter */ - titan_writel(0x00ff18ff, CPRR); - - /* - * Set up the PADMUX. Power down all ethernet slices, - * they will be powered up and configured at device startup. - */ - titan_writel(0x00878206, CPTC1R); - titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */ - - /* Reset and enable the FIFO block */ - titan_writel(0x00000001, SDRXFCIE); - titan_writel(0x00000001, SDTXFCIE); - titan_writel(0x00000100, SDRXFCIE); - titan_writel(0x00000000, SDTXFCIE); - - /* - * Initialize the common interrupt shared by all components of - * the GPI/Ethernet subsystem. - */ - titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0); - titan_writel(TITAN_MSGINT, CPCFG1); - - /* - * XDMA configuration. - * In order for the XDMA to be sharable among multiple drivers, - * the setup must be done here in the platform. The reason is that - * this setup can only be done while the XDMA is in reset. If this - * were done in a driver, it would interrupt all other drivers - * using the XDMA. - */ - titan_writel(0x80021dff, GXCFG); /* XDMA reset */ - titan_writel(0x00000000, CPXCISRA); - titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */ -#if defined(CONFIG_HIGHMEM) -# error change for HIGHMEM support! -#else - titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */ -#endif - titan_writel(0, GXDMA_DESCADR); - - for (i = 0x5040; i <= 0x5300; i += 0x0040) - titan_writel(0x80080000, i); /* reset channel */ - - titan_writel((0x1 << 29) /* no sparse tx descr. */ - | (0x1 << 28) /* no sparse rx descr. */ - | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */ - | (0x1 << 21) | (0x1 << 22) /* data coherency */ - | (0x1 << 17) - | 0x1dff, - GXCFG); - -#if defined(CONFIG_SMP) -# error No SMP support -#else - /* All interrupts go to core #0 only. */ - titan_writel(0x1f007fff, CPDST0A); - titan_writel(0x00000000, CPDST0B); - titan_writel(0x0000ff3f, CPDST1A); - titan_writel(0x00000000, CPDST1B); - titan_writel(0x00ffffff, CPXDSTA); - titan_writel(0x00000000, CPXDSTB); -#endif - - /* Enable DUART interrupts, disable everything else. */ - titan_writel(0x04000000, CPGIG0ER); - titan_writel(0x000000c0, CPGIG1ER); - - excite_procfs_init(); - return 0; -} - -void __init plat_mem_setup(void) -{ - volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000; - - /* Announce RAM to system */ - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); - - /* Set up the peripheral address map */ - *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0; - wmb(); - *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4; - wmb(); - - ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5); - ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5); - ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13); - ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13); - - /* Local bus slot #0 */ - ocd_writel(0x00040510, LDP0); - ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9); - ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9); - - /* Local bus slot #2 */ - ocd_writel(0x00000330, LDP2); - ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11); - ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11); - - /* Local bus slot #3 */ - ocd_writel(0x00123413, LDP3); - ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12); - ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12); -} - - - -console_initcall(excite_init_console); -arch_initcall(excite_platform_init); - -EXPORT_SYMBOL(titan_lock); -EXPORT_SYMBOL(titan_irqflags); -EXPORT_SYMBOL(titan_irq); -EXPORT_SYMBOL(ocd_base); -EXPORT_SYMBOL(titan_base); diff --git a/trunk/arch/mips/bcm47xx/prom.c b/trunk/arch/mips/bcm47xx/prom.c index fb284c3b2cff..c51405e57921 100644 --- a/trunk/arch/mips/bcm47xx/prom.c +++ b/trunk/arch/mips/bcm47xx/prom.c @@ -100,11 +100,11 @@ static __init void prom_init_console(void) static __init void prom_init_cmdline(void) { - static char buf[CL_SIZE] __initdata; + static char buf[COMMAND_LINE_SIZE] __initdata; /* Get the kernel command line from CFE */ - if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) { - buf[CL_SIZE-1] = 0; + if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) { + buf[COMMAND_LINE_SIZE - 1] = 0; strcpy(arcs_cmdline, buf); } @@ -112,13 +112,13 @@ static __init void prom_init_cmdline(void) * as CFE is not available anymore later in the boot process. */ if ((strstr(arcs_cmdline, "console=")) == NULL) { /* Try to read the default serial port used by CFE */ - if ((cfe_getenv("BOOT_CONSOLE", buf, CL_SIZE) < 0) + if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0) || (strncmp("uart", buf, 4))) /* Default to uart0 */ strcpy(buf, "uart0"); /* Compute the new command line */ - snprintf(arcs_cmdline, CL_SIZE, "%s console=ttyS%c,115200", + snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200", arcs_cmdline, buf[4]); } } diff --git a/trunk/arch/mips/boot/Makefile b/trunk/arch/mips/boot/Makefile index 2a209d74f0b4..094bc84765a3 100644 --- a/trunk/arch/mips/boot/Makefile +++ b/trunk/arch/mips/boot/Makefile @@ -25,7 +25,7 @@ strip-flags = $(addprefix --remove-section=,$(drop-sections)) VMLINUX = vmlinux -all: vmlinux.ecoff vmlinux.srec addinitrd +all: vmlinux.ecoff vmlinux.srec vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS) @@ -39,11 +39,7 @@ vmlinux.bin: $(VMLINUX) vmlinux.srec: $(VMLINUX) $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec -$(obj)/addinitrd: $(obj)/addinitrd.c - $(HOSTCC) -o $@ $^ - -clean-files += addinitrd \ - elf2ecoff \ +clean-files += elf2ecoff \ vmlinux.bin \ vmlinux.ecoff \ vmlinux.srec diff --git a/trunk/arch/mips/boot/addinitrd.c b/trunk/arch/mips/boot/addinitrd.c deleted file mode 100644 index b5b3febc10cc..000000000000 --- a/trunk/arch/mips/boot/addinitrd.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * addinitrd - program to add a initrd image to an ecoff kernel - * - * (C) 1999 Thomas Bogendoerfer - * minor modifications, cleanup: Guido Guenther - * further cleanup: Maciej W. Rozycki - */ - -#include -#include -#include -#include -#include -#include - -#include "ecoff.h" - -#define MIPS_PAGE_SIZE 4096 -#define MIPS_PAGE_MASK (MIPS_PAGE_SIZE-1) - -#define swab16(x) \ - ((unsigned short)( \ - (((unsigned short)(x) & (unsigned short)0x00ffU) << 8) | \ - (((unsigned short)(x) & (unsigned short)0xff00U) >> 8) )) - -#define swab32(x) \ - ((unsigned int)( \ - (((unsigned int)(x) & (unsigned int)0x000000ffUL) << 24) | \ - (((unsigned int)(x) & (unsigned int)0x0000ff00UL) << 8) | \ - (((unsigned int)(x) & (unsigned int)0x00ff0000UL) >> 8) | \ - (((unsigned int)(x) & (unsigned int)0xff000000UL) >> 24) )) - -#define SWAB(a) (swab ? swab32(a) : (a)) - -void die(char *s) -{ - perror(s); - exit(1); -} - -int main(int argc, char *argv[]) -{ - int fd_vmlinux, fd_initrd, fd_outfile; - FILHDR efile; - AOUTHDR eaout; - SCNHDR esecs[3]; - struct stat st; - char buf[1024]; - unsigned long loadaddr; - unsigned long initrd_header[2]; - int i, cnt; - int swab = 0; - - if (argc != 4) { - printf("Usage: %s \n", argv[0]); - exit(1); - } - - if ((fd_vmlinux = open (argv[1], O_RDONLY)) < 0) - die("open vmlinux"); - if (read (fd_vmlinux, &efile, sizeof efile) != sizeof efile) - die("read file header"); - if (read (fd_vmlinux, &eaout, sizeof eaout) != sizeof eaout) - die("read aout header"); - if (read (fd_vmlinux, esecs, sizeof esecs) != sizeof esecs) - die("read section headers"); - /* - * check whether the file is good for us - */ - /* TBD */ - - /* - * check, if we have to swab words - */ - if (ntohs(0xaa55) == 0xaa55) { - if (efile.f_magic == swab16(MIPSELMAGIC)) - swab = 1; - } else { - if (efile.f_magic == swab16(MIPSEBMAGIC)) - swab = 1; - } - - /* make sure we have an empty data segment for the initrd */ - if (eaout.dsize || esecs[1].s_size) { - fprintf(stderr, "Data segment not empty. Giving up!\n"); - exit(1); - } - if ((fd_initrd = open (argv[2], O_RDONLY)) < 0) - die("open initrd"); - if (fstat (fd_initrd, &st) < 0) - die("fstat initrd"); - loadaddr = ((SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size) - + MIPS_PAGE_SIZE-1) & ~MIPS_PAGE_MASK) - 8; - if (loadaddr < (SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size))) - loadaddr += MIPS_PAGE_SIZE; - initrd_header[0] = SWAB(0x494E5244); - initrd_header[1] = SWAB(st.st_size); - eaout.dsize = esecs[1].s_size = initrd_header[1] = SWAB(st.st_size+8); - eaout.data_start = esecs[1].s_vaddr = esecs[1].s_paddr = SWAB(loadaddr); - - if ((fd_outfile = open (argv[3], O_RDWR|O_CREAT|O_TRUNC, 0666)) < 0) - die("open outfile"); - if (write (fd_outfile, &efile, sizeof efile) != sizeof efile) - die("write file header"); - if (write (fd_outfile, &eaout, sizeof eaout) != sizeof eaout) - die("write aout header"); - if (write (fd_outfile, esecs, sizeof esecs) != sizeof esecs) - die("write section headers"); - /* skip padding */ - if(lseek(fd_vmlinux, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1) - die("lseek vmlinux"); - if(lseek(fd_outfile, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1) - die("lseek outfile"); - /* copy text segment */ - cnt = SWAB(eaout.tsize); - while (cnt) { - if ((i = read (fd_vmlinux, buf, sizeof buf)) <= 0) - die("read vmlinux"); - if (write (fd_outfile, buf, i) != i) - die("write vmlinux"); - cnt -= i; - } - if (write (fd_outfile, initrd_header, sizeof initrd_header) != sizeof initrd_header) - die("write initrd header"); - while ((i = read (fd_initrd, buf, sizeof buf)) > 0) - if (write (fd_outfile, buf, i) != i) - die("write initrd"); - close(fd_vmlinux); - close(fd_initrd); - return 0; -} diff --git a/trunk/arch/mips/boot/compressed/Makefile b/trunk/arch/mips/boot/compressed/Makefile new file mode 100644 index 000000000000..e27f40bbd4e5 --- /dev/null +++ b/trunk/arch/mips/boot/compressed/Makefile @@ -0,0 +1,100 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. +# +# Adapted for MIPS Pete Popov, Dan Malek +# +# Copyright (C) 1994 by Linus Torvalds +# Adapted for PowerPC by Gary Thomas +# modified by Cort (cort@cs.nmt.edu) +# +# Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University +# Author: Wu Zhangjin +# + +# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE +VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1) +VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) +VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE)))) + +# set the default size of the mallocing area for decompressing +BOOT_HEAP_SIZE := 0x400000 + +# Disable Function Tracer +KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//") + +KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \ + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \ + +KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \ + -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \ + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) + +obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o + +obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o + +OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S +$(obj)/vmlinux.bin: $(KBUILD_IMAGE) + $(call if_changed,objcopy) + +suffix_$(CONFIG_KERNEL_GZIP) = gz +suffix_$(CONFIG_KERNEL_BZIP2) = bz2 +suffix_$(CONFIG_KERNEL_LZMA) = lzma +tool_$(CONFIG_KERNEL_GZIP) = gzip +tool_$(CONFIG_KERNEL_BZIP2) = bzip2 +tool_$(CONFIG_KERNEL_LZMA) = lzma +$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin + $(call if_changed,$(tool_y)) + +$(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) \ + --add-section=.image=$< \ + --set-section-flags=.image=contents,alloc,load,readonly,data \ + $(obj)/dummy.o $@ + +LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T +vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o + $(call if_changed,ld) + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@ + +# +# Some DECstations need all possible sections of an ECOFF executable +# +ifdef CONFIG_MACH_DECSTATION + E2EFLAGS = -a +else + E2EFLAGS = +endif + +# elf2ecoff can only handle 32bit image + +ifdef CONFIG_32BIT + VMLINUZ = vmlinuz +else + VMLINUZ = vmlinuz.32 +endif + +vmlinuz.32: vmlinuz + $(Q)$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ + +vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ) + $(Q)$(obj)/../elf2ecoff $(VMLINUZ) vmlinuz.ecoff $(E2EFLAGS) + +$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c + $(Q)$(HOSTCC) -o $@ $^ + +drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options +strip-flags = $(addprefix --remove-section=,$(drop-sections)) + +OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags) +vmlinuz.bin: vmlinuz + $(call if_changed,objcopy) + +OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags) +vmlinuz.srec: vmlinuz + $(call if_changed,objcopy) + +clean: +clean-files += *.o \ + vmlinu* diff --git a/trunk/arch/mips/boot/compressed/dbg.c b/trunk/arch/mips/boot/compressed/dbg.c new file mode 100644 index 000000000000..ff4dc7a33a9f --- /dev/null +++ b/trunk/arch/mips/boot/compressed/dbg.c @@ -0,0 +1,37 @@ +/* + * MIPS-specific debug support for pre-boot environment + * + * NOTE: putc() is board specific, if your board have a 16550 compatible uart, + * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you + * need to implement your own putc(). + */ + +#include +#include + +void __attribute__ ((weak)) putc(char c) +{ +} + +void puts(const char *s) +{ + char c; + while ((c = *s++) != '\0') { + putc(c); + if (c == '\n') + putc('\r'); + } +} + +void puthex(unsigned long long val) +{ + + unsigned char buf[10]; + int i; + for (i = 7; i >= 0; i--) { + buf[i] = "0123456789ABCDEF"[val & 0x0F]; + val >>= 4; + } + buf[8] = '\0'; + puts(buf); +} diff --git a/trunk/arch/mips/boot/compressed/decompress.c b/trunk/arch/mips/boot/compressed/decompress.c new file mode 100644 index 000000000000..67330c2f7318 --- /dev/null +++ b/trunk/arch/mips/boot/compressed/decompress.c @@ -0,0 +1,126 @@ +/* + * Misc. bootloader code for many machines. + * + * Copyright 2001 MontaVista Software Inc. + * Author: Matt Porter Derived from + * arch/ppc/boot/prep/misc.c + * + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +#include + +/* These two variables specify the free mem region + * that can be used for temporary malloc area + */ +unsigned long free_mem_ptr; +unsigned long free_mem_end_ptr; +char *zimage_start; + +/* The linker tells us where the image is. */ +extern unsigned char __image_begin, __image_end; +extern unsigned char __ramdisk_begin, __ramdisk_end; +unsigned long initrd_size; + +/* debug interfaces */ +extern void puts(const char *s); +extern void puthex(unsigned long long val); + +void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while (1) + ; /* Halt */ +} + +/* activate the code for pre-boot environment */ +#define STATIC static + +#ifdef CONFIG_KERNEL_GZIP +void *memcpy(void *dest, const void *src, size_t n) +{ + int i; + const char *s = src; + char *d = dest; + + for (i = 0; i < n; i++) + d[i] = s[i]; + return dest; +} +#include "../../../../lib/decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_BZIP2 +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = s; + + for (i = 0; i < n; i++) + ss[i] = c; + return s; +} +#include "../../../../lib/decompress_bunzip2.c" +#endif + +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + +void decompress_kernel(unsigned long boot_heap_start) +{ + int zimage_size; + + /* + * We link ourself to an arbitrary low address. When we run, we + * relocate outself to that address. __image_beign points to + * the part of the image where the zImage is. -- Tom + */ + zimage_start = (char *)(unsigned long)(&__image_begin); + zimage_size = (unsigned long)(&__image_end) - + (unsigned long)(&__image_begin); + + /* + * The zImage and initrd will be between start and _end, so they've + * already been moved once. We're good to go now. -- Tom + */ + puts("zimage at: "); + puthex((unsigned long)zimage_start); + puts(" "); + puthex((unsigned long)(zimage_size + zimage_start)); + puts("\n"); + + if (initrd_size) { + puts("initrd at: "); + puthex((unsigned long)(&__ramdisk_begin)); + puts(" "); + puthex((unsigned long)(&__ramdisk_end)); + puts("\n"); + } + + /* this area are prepared for mallocing when decompressing */ + free_mem_ptr = boot_heap_start; + free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE; + + /* Display standard Linux/MIPS boot prompt for kernel args */ + puts("Uncompressing Linux at load address "); + puthex(VMLINUX_LOAD_ADDRESS_ULL); + puts("\n"); + /* Decompress the kernel with according algorithm */ + decompress(zimage_start, zimage_size, 0, 0, + (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, error); + /* FIXME: is there a need to flush cache here? */ + puts("Now, booting the kernel...\n"); +} diff --git a/trunk/arch/mips/boot/compressed/dummy.c b/trunk/arch/mips/boot/compressed/dummy.c new file mode 100644 index 000000000000..31dbf45bf99c --- /dev/null +++ b/trunk/arch/mips/boot/compressed/dummy.c @@ -0,0 +1,4 @@ +int main(void) +{ + return 0; +} diff --git a/trunk/arch/mips/boot/compressed/head.S b/trunk/arch/mips/boot/compressed/head.S new file mode 100644 index 000000000000..4e65a8420bee --- /dev/null +++ b/trunk/arch/mips/boot/compressed/head.S @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf Electronics + * Written by Ralf Baechle and Andreas Busse + * Copyright (C) 1995 - 1999 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Modified for DECStation and hence R3000 support by Paul M. Antoine + * Further modifications by David S. Miller and Harald Koerfgen + * Copyright (C) 1999 Silicon Graphics, Inc. + */ + +#include +#include + + .set noreorder + .cprestore + LEAF(start) +start: + /* Save boot rom start args */ + move s0, a0 + move s1, a1 + move s2, a2 + move s3, a3 + + /* Clear BSS */ + PTR_LA a0, _edata + PTR_LA a2, _end +1: sw zero, 0(a0) + bne a2, a0, 1b + addiu a0, a0, 4 + + PTR_LA a0, (.heap) /* heap address */ + PTR_LA sp, (.stack + 8192) /* stack address */ + + PTR_LA ra, 2f + PTR_LA k0, decompress_kernel + jr k0 + nop +2: + move a0, s0 + move a1, s1 + move a2, s2 + move a3, s3 + PTR_LI k0, KERNEL_ENTRY + jr k0 + nop +3: + b 3b + nop + END(start) + + .comm .heap,BOOT_HEAP_SIZE,4 + .comm .stack,4096*2,4 diff --git a/trunk/arch/mips/boot/compressed/ld.script b/trunk/arch/mips/boot/compressed/ld.script new file mode 100644 index 000000000000..29e9f4c0d5d8 --- /dev/null +++ b/trunk/arch/mips/boot/compressed/ld.script @@ -0,0 +1,150 @@ +OUTPUT_ARCH(mips) +ENTRY(start) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + .init : { *(.init) } =0 + .text : + { + _ftext = . ; + *(.text) + *(.rodata) + *(.rodata1) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + } =0 + .kstrtab : { *(.kstrtab) } + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + __start___dbe_table = .; /* Exception table for data bus errors */ + __dbe_table : { *(__dbe_table) } + __stop___dbe_table = .; + + __start___ksymtab = .; /* Kernel symbol table */ + __ksymtab : { *(__ksymtab) } + __stop___ksymtab = .; + + _etext = .; + + . = ALIGN(8192); + .data.init_task : { *(.data.init_task) } + + /* Startup code */ + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(16); + __setup_start = .; + .setup.init : { *(.setup.init) } + __setup_end = .; + __initcall_start = .; + .initcall.init : { *(.initcall.init) } + __initcall_end = .; + . = ALIGN(4096); /* Align double page for init_task_union */ + __init_end = .; + + . = ALIGN(4096); + .data.page_aligned : { *(.data.idt) } + + . = ALIGN(32); + .data.cacheline_aligned : { *(.data.cacheline_aligned) } + + .fini : { *(.fini) } =0 + .reginfo : { *(.reginfo) } + /* Adjust the address for the data segment. We want to adjust up to + the same address within the page on the next page up. It would + be more correct to do this: + . = .; + The current expression does not correctly handle the case of a + text segment ending precisely at the end of a page; it causes the + data segment to skip a page. The above expression does not have + this problem, but it will currently (2/95) cause BFD to allocate + a single segment, combining both text and data, for this case. + This will prevent the text segment from being shared among + multiple executions of the program; I think that is more + important than losing a page of the virtual address space (note + that no actual memory is lost; the page which is skipped can not + be referenced). */ + . = .; + .data : + { + _fdata = . ; + *(.data) + + /* Put the compressed image here, so bss is on the end. */ + __image_begin = .; + *(.image) + __image_end = .; + /* Align the initial ramdisk image (INITRD) on page boundaries. */ + . = ALIGN(4096); + __ramdisk_begin = .; + *(.initrd) + __ramdisk_end = .; + . = ALIGN(4096); + + CONSTRUCTORS + } + .data1 : { *(.data1) } + _gp = . + 0x8000; + .lit8 : { *(.lit8) } + .lit4 : { *(.lit4) } + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + .got : { *(.got.plt) *(.got) } + .dynamic : { *(.dynamic) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { *(.sdata) } + . = ALIGN(4); + _edata = .; + PROVIDE (edata = .); + + __bss_start = .; + _fbss = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : + { + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); + } + + /* Sections to be discarded */ + /DISCARD/ : + { + *(.text.exit) + *(.data.exit) + *(.exitcall.exit) + } + + /* This is the MIPS specific mdebug section. */ + .mdebug : { *(.mdebug) } + /* These are needed for ELF backends which have not yet been + converted to the new style linker. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + /* DWARF debug sections. + Symbols in the .debug DWARF section are relative to the beginning of the + section so we begin .debug at 0. It's not clear yet what needs to happen + for the others. */ + .debug 0 : { *(.debug) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .line 0 : { *(.line) } + /* These must appear regardless of . */ + .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } + .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } + .comment : { *(.comment) } + .note : { *(.note) } +} diff --git a/trunk/arch/mips/boot/compressed/uart-16550.c b/trunk/arch/mips/boot/compressed/uart-16550.c new file mode 100644 index 000000000000..c9caaf4fbf60 --- /dev/null +++ b/trunk/arch/mips/boot/compressed/uart-16550.c @@ -0,0 +1,43 @@ +/* + * 16550 compatible uart based serial debug support for zboot + */ + +#include +#include +#include + +#include + +#if defined(CONFIG_MACH_LOONGSON) || defined(CONFIG_MIPS_MALTA) +#define UART_BASE 0x1fd003f8 +#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset)) +#endif + +#ifdef CONFIG_AR7 +#include +#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset)) +#endif + +#ifndef PORT +#error please define the serial port address for your own machine +#endif + +static inline unsigned int serial_in(int offset) +{ + return *((char *)PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + *((char *)PORT(offset)) = value; +} + +void putc(char c) +{ + int timeout = 1024; + + while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0)) + ; + + serial_out(UART_TX, c); +} diff --git a/trunk/arch/mips/cavium-octeon/Makefile b/trunk/arch/mips/cavium-octeon/Makefile index 139436280520..3e9876317e61 100644 --- a/trunk/arch/mips/cavium-octeon/Makefile +++ b/trunk/arch/mips/cavium-octeon/Makefile @@ -9,7 +9,7 @@ # Copyright (C) 2005-2009 Cavium Networks # -obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o +obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o diff --git a/trunk/arch/mips/cavium-octeon/cpu.c b/trunk/arch/mips/cavium-octeon/cpu.c new file mode 100644 index 000000000000..b6df5387e855 --- /dev/null +++ b/trunk/arch/mips/cavium-octeon/cpu.c @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + unsigned long flags; + unsigned int status; + + switch (action) { + case CU2_EXCEPTION: + prefetch(¤t->thread.cp2); + local_irq_save(flags); + KSTK_STATUS(current) |= ST0_CU2; + status = read_c0_status(); + write_c0_status(status | ST0_CU2); + octeon_cop2_restore(&(current->thread.cp2)); + write_c0_status(status & ~ST0_CU2); + local_irq_restore(flags); + + return NOTIFY_BAD; /* Don't call default notifier */ + } + + return NOTIFY_OK; /* Let default notifier send signals */ +} + +static struct notifier_block cnmips_cu2_notifier = { + .notifier_call = cnmips_cu2_call, +}; + +static int cnmips_cu2_setup(void) +{ + return register_cu2_notifier(&cnmips_cu2_notifier); +} +early_initcall(cnmips_cu2_setup); diff --git a/trunk/arch/mips/cavium-octeon/octeon-platform.c b/trunk/arch/mips/cavium-octeon/octeon-platform.c index be711dd2d918..cfdb4c2ac5c3 100644 --- a/trunk/arch/mips/cavium-octeon/octeon-platform.c +++ b/trunk/arch/mips/cavium-octeon/octeon-platform.c @@ -159,6 +159,94 @@ static int __init octeon_rng_device_init(void) } device_initcall(octeon_rng_device_init); +/* Octeon SMI/MDIO interface. */ +static int __init octeon_mdiobus_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + + if (octeon_is_simulation()) + return 0; /* No mdio in the simulator. */ + + /* The bus number is the platform_device id. */ + pd = platform_device_alloc("mdio-octeon", 0); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + ret = platform_device_add(pd); + if (ret) + goto fail; + + return ret; +fail: + platform_device_put(pd); + +out: + return ret; + +} +device_initcall(octeon_mdiobus_device_init); + +/* Octeon mgmt port Ethernet interface. */ +static int __init octeon_mgmt_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + int port, num_ports; + + struct resource mgmt_port_resource = { + .flags = IORESOURCE_IRQ, + .start = -1, + .end = -1 + }; + + if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX)) + return 0; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) + num_ports = 1; + else + num_ports = 2; + + for (port = 0; port < num_ports; port++) { + pd = platform_device_alloc("octeon_mgmt", port); + if (!pd) { + ret = -ENOMEM; + goto out; + } + switch (port) { + case 0: + mgmt_port_resource.start = OCTEON_IRQ_MII0; + break; + case 1: + mgmt_port_resource.start = OCTEON_IRQ_MII1; + break; + default: + BUG(); + } + mgmt_port_resource.end = mgmt_port_resource.start; + + ret = platform_device_add_resources(pd, &mgmt_port_resource, 1); + + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + } + return ret; +fail: + platform_device_put(pd); + +out: + return ret; + +} +device_initcall(octeon_mgmt_device_init); + MODULE_AUTHOR("David Daney "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Platform driver for Octeon SOC"); diff --git a/trunk/arch/mips/configs/ar7_defconfig b/trunk/arch/mips/configs/ar7_defconfig index 35648302f7cc..5a5b6ba7514e 100644 --- a/trunk/arch/mips/configs/ar7_defconfig +++ b/trunk/arch/mips/configs/ar7_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set CONFIG_AR7=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -265,7 +264,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_PROBE_INITRD_HEADER=y # CONFIG_FREEZER is not set # @@ -1053,7 +1051,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/bcm47xx_defconfig b/trunk/arch/mips/configs/bcm47xx_defconfig index 94b7d57f906d..267bd46120bc 100644 --- a/trunk/arch/mips/configs/bcm47xx_defconfig +++ b/trunk/arch/mips/configs/bcm47xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set CONFIG_BCM47XX=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1853,7 +1852,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/bcm63xx_defconfig b/trunk/arch/mips/configs/bcm63xx_defconfig index ea00c18d1f7b..7fee0273c829 100644 --- a/trunk/arch/mips/configs/bcm63xx_defconfig +++ b/trunk/arch/mips/configs/bcm63xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_BCM63XX=y # CONFIG_MIPS_COBALT is not set @@ -942,7 +941,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/bigsur_defconfig b/trunk/arch/mips/configs/bigsur_defconfig index 13d9eb4736c0..c2f06e38c854 100644 --- a/trunk/arch/mips/configs/bigsur_defconfig +++ b/trunk/arch/mips/configs/bigsur_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1237,7 +1236,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_SB1XXX_CORELIS is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/trunk/arch/mips/configs/capcella_defconfig b/trunk/arch/mips/configs/capcella_defconfig index 185df23fd460..72b7e456916e 100644 --- a/trunk/arch/mips/configs/capcella_defconfig +++ b/trunk/arch/mips/configs/capcella_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -783,7 +782,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/cavium-octeon_defconfig b/trunk/arch/mips/configs/cavium-octeon_defconfig index 7afaa28a3768..c8507bc8e925 100644 --- a/trunk/arch/mips/configs/cavium-octeon_defconfig +++ b/trunk/arch/mips/configs/cavium-octeon_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -269,7 +268,6 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y -# CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_FREEZER is not set # @@ -822,7 +820,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/trunk/arch/mips/configs/cobalt_defconfig b/trunk/arch/mips/configs/cobalt_defconfig index 6c8cca8589ba..49e61312e006 100644 --- a/trunk/arch/mips/configs/cobalt_defconfig +++ b/trunk/arch/mips/configs/cobalt_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set @@ -1126,7 +1125,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/db1000_defconfig b/trunk/arch/mips/configs/db1000_defconfig index dbdf3bb1a34a..68e90cd6b2d4 100644 --- a/trunk/arch/mips/configs/db1000_defconfig +++ b/trunk/arch/mips/configs/db1000_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/db1100_defconfig b/trunk/arch/mips/configs/db1100_defconfig index fa6814475898..90812830e940 100644 --- a/trunk/arch/mips/configs/db1100_defconfig +++ b/trunk/arch/mips/configs/db1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/db1200_defconfig b/trunk/arch/mips/configs/db1200_defconfig index d73f1de43b5d..dabf03032e06 100644 --- a/trunk/arch/mips/configs/db1200_defconfig +++ b/trunk/arch/mips/configs/db1200_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_DB1550 is not set CONFIG_MIPS_DB1200=y # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1172,7 +1171,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=48M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/db1500_defconfig b/trunk/arch/mips/configs/db1500_defconfig index ec3e028a5b2e..a15131373138 100644 --- a/trunk/arch/mips/configs/db1500_defconfig +++ b/trunk/arch/mips/configs/db1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1390,7 +1389,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/db1550_defconfig b/trunk/arch/mips/configs/db1550_defconfig index 7631dae51be9..6b64339c0014 100644 --- a/trunk/arch/mips/configs/db1550_defconfig +++ b/trunk/arch/mips/configs/db1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y CONFIG_MIPS_DB1550=y # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1207,7 +1206,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/decstation_defconfig b/trunk/arch/mips/configs/decstation_defconfig index 9e65e6a2dcb3..cbb4d86f2912 100644 --- a/trunk/arch/mips/configs/decstation_defconfig +++ b/trunk/arch/mips/configs/decstation_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set @@ -882,7 +881,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/e55_defconfig b/trunk/arch/mips/configs/e55_defconfig index 1bd84d42b14f..52968c46c806 100644 --- a/trunk/arch/mips/configs/e55_defconfig +++ b/trunk/arch/mips/configs/e55_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -561,7 +560,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/excite_defconfig b/trunk/arch/mips/configs/excite_defconfig deleted file mode 100644 index 1995d43a2ed1..000000000000 --- a/trunk/arch/mips/configs/excite_defconfig +++ /dev/null @@ -1,1335 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:31 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -CONFIG_BASLER_EXCITE=y -# CONFIG_BASLER_EXCITE_PROTOTYPE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_COHERENT=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_IRQ_CPU_RM9K=y -CONFIG_MIPS_RM9122=y -CONFIG_SERIAL_RM9000=y -CONFIG_GPI_RM9000=y -CONFIG_WDT_RM9000=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -CONFIG_CPU_RM9000=y -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM9000=y -CONFIG_WEAK_ORDERING=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_BASLER_EXCITE is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WDT_RM9K_GPI=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=m -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -CONFIG_CRYPTO_XCBC=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -# CONFIG_CRYPTO_DES is not set -CONFIG_CRYPTO_FCRYPT=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/trunk/arch/mips/configs/fuloong2e_defconfig b/trunk/arch/mips/configs/fuloong2e_defconfig index 0197f0de6b3f..a09dd03aa8c8 100644 --- a/trunk/arch/mips/configs/fuloong2e_defconfig +++ b/trunk/arch/mips/configs/fuloong2e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc1 -# Thu Jul 2 22:37:00 2009 +# Linux kernel version: 2.6.32-rc4 +# Fri Oct 16 13:18:01 2009 # CONFIG_MIPS=y @@ -10,8 +10,8 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -105,6 +105,8 @@ CONFIG_CPU_LOONGSON2E=y # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set # CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y CONFIG_CPU_LOONGSON2=y CONFIG_SYS_HAS_CPU_LOONGSON2E=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y @@ -135,12 +137,16 @@ CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PHYS_ADDR_T_64BIT=y @@ -148,6 +154,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -180,6 +187,12 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-fuloong2e" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -193,11 +206,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -235,18 +249,16 @@ CONFIG_SHMEM=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_SYSCALL_WRAPPERS=y @@ -255,8 +267,8 @@ CONFIG_HAVE_SYSCALL_WRAPPERS=y # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 @@ -283,7 +295,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -321,9 +333,14 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y # CONFIG_SUSPEND is not set -# CONFIG_HIBERNATION is not set +CONFIG_HIBERNATION_NVS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="/dev/hda3" +# CONFIG_PM_RUNTIME is not set CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options @@ -442,6 +459,7 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -473,6 +491,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -481,7 +500,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set CONFIG_NET_9P=m @@ -495,6 +513,7 @@ CONFIG_NET_9P=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -504,9 +523,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -820,6 +839,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -867,10 +887,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -886,6 +903,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_CDC_PHONET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -933,12 +951,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -946,6 +968,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set @@ -1015,6 +1038,7 @@ CONFIG_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -1070,9 +1094,6 @@ CONFIG_I2C_VIAPRO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1088,7 +1109,6 @@ CONFIG_I2C_VIAPRO=m # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1105,6 +1125,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1114,6 +1135,7 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1198,6 +1220,7 @@ CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1304,7 +1327,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y # @@ -1356,6 +1378,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=m +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1453,6 +1476,7 @@ CONFIG_UIO_CIF=m # CONFIG_UIO_SMX is not set # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set +# CONFIG_UIO_PCI_GENERIC is not set # # TI VLYNQ @@ -1469,10 +1493,10 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_EXT4DEV_COMPAT=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set @@ -1489,6 +1513,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1557,7 +1582,6 @@ CONFIG_OMFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1666,6 +1690,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1678,13 +1703,14 @@ CONFIG_NOP_TRACER=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options @@ -1742,11 +1768,13 @@ CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/trunk/arch/mips/configs/ip22_defconfig b/trunk/arch/mips/configs/ip22_defconfig index f14d38ba6034..222d7eca2fe4 100644 --- a/trunk/arch/mips/configs/ip22_defconfig +++ b/trunk/arch/mips/configs/ip22_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1188,7 +1187,7 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/ip27_defconfig b/trunk/arch/mips/configs/ip27_defconfig index 1fc73aa7b509..ed84b4cb3c8d 100644 --- a/trunk/arch/mips/configs/ip27_defconfig +++ b/trunk/arch/mips/configs/ip27_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -940,7 +939,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/ip28_defconfig b/trunk/arch/mips/configs/ip28_defconfig index 539dccb0345d..dab2e5aaadaf 100644 --- a/trunk/arch/mips/configs/ip28_defconfig +++ b/trunk/arch/mips/configs/ip28_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -816,7 +815,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/ip32_defconfig b/trunk/arch/mips/configs/ip32_defconfig index d934bdefb393..1841c88d3d24 100644 --- a/trunk/arch/mips/configs/ip32_defconfig +++ b/trunk/arch/mips/configs/ip32_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1126,7 +1125,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/jazz_defconfig b/trunk/arch/mips/configs/jazz_defconfig index d22df61833a8..14c2ab3b2674 100644 --- a/trunk/arch/mips/configs/jazz_defconfig +++ b/trunk/arch/mips/configs/jazz_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y @@ -1374,7 +1373,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/jmr3927_defconfig b/trunk/arch/mips/configs/jmr3927_defconfig index 5380f1f582d9..4d66c44cced8 100644 --- a/trunk/arch/mips/configs/jmr3927_defconfig +++ b/trunk/arch/mips/configs/jmr3927_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -835,7 +834,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/lasat_defconfig b/trunk/arch/mips/configs/lasat_defconfig index 044074db7e55..08d481e3d42a 100644 --- a/trunk/arch/mips/configs/lasat_defconfig +++ b/trunk/arch/mips/configs/lasat_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -798,7 +797,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/lemote2f_defconfig b/trunk/arch/mips/configs/lemote2f_defconfig new file mode 100644 index 000000000000..b71a0a4fb95f --- /dev/null +++ b/trunk/arch/mips/configs/lemote2f_defconfig @@ -0,0 +1,1835 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Mon Nov 9 23:42:42 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +CONFIG_MACH_LOONGSON=y +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_LEMOTE_FULOONG2E is not set +CONFIG_LEMOTE_MACH2F=y +CONFIG_CS5536=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2E is not set +CONFIG_CPU_LOONGSON2F=y +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y +CONFIG_CPU_LOONGSON2=y +CONFIG_SYS_HAS_CPU_LOONGSON2F=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +# CONFIG_32BIT is not set +CONFIG_64BIT=y +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_BOARD_SCACHE=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_WB=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_ISA=y +CONFIG_MMU=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_MIPS32_COMPAT=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_BINFMT_ELF32=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION_NVS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="/dev/hda3" +# CONFIG_PM_RUNTIME is not set +CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +CONFIG_DEFAULT_BIC=y +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="bic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +# CONFIG_RFKILL_INPUT is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_PNP is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_TC35815 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +CONFIG_WLAN=y +CONFIG_WLAN_PRE80211=y +# CONFIG_STRIP is not set +# CONFIG_WAVELAN is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +CONFIG_MOUSE_PS2_SYNAPTICS=y +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=16 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_FOURPORT=y +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set +# CONFIG_SERIAL_8250_HUB6 is not set +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_STRADIS is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +CONFIG_FB_SIS=y +CONFIG_FB_SIS_300=y +CONFIG_FB_SIS_315=y +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_FONT_6x11=y +CONFIG_FONT_7x14=y +CONFIG_FONT_PEARL_8x8=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_FONT_MINI_4x6=y +CONFIG_FONT_SUN8x16=y +CONFIG_FONT_SUN12x22=y +CONFIG_FONT_10x18=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +CONFIG_SND_CS5535AUDIO=m +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +# CONFIG_USB_PRINTER is not set +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +# CONFIG_RTL8187SE is not set +# CONFIG_RTL8192SU is not set +# CONFIG_RTL8192E is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_B3DFG is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set +# CONFIG_VME_BUS is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set +CONFIG_FB_SM7XX=y +CONFIG_FB_SM7XX_ACCEL=y + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_CMDLINE_BOOL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/mips/configs/malta_defconfig b/trunk/arch/mips/configs/malta_defconfig index 3f01870b4d65..d3c601206db2 100644 --- a/trunk/arch/mips/configs/malta_defconfig +++ b/trunk/arch/mips/configs/malta_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # CONFIG_ZONE_DMA=y # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1591,7 +1590,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/markeins_defconfig b/trunk/arch/mips/configs/markeins_defconfig index d001f7e87418..6a325c02b63c 100644 --- a/trunk/arch/mips/configs/markeins_defconfig +++ b/trunk/arch/mips/configs/markeins_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1366,7 +1365,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/mipssim_defconfig b/trunk/arch/mips/configs/mipssim_defconfig index 7358454deaa6..f77a34e0f938 100644 --- a/trunk/arch/mips/configs/mipssim_defconfig +++ b/trunk/arch/mips/configs/mipssim_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -635,7 +634,9 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/trunk/arch/mips/configs/mpc30x_defconfig b/trunk/arch/mips/configs/mpc30x_defconfig index 8c720e51795b..17203056b22b 100644 --- a/trunk/arch/mips/configs/mpc30x_defconfig +++ b/trunk/arch/mips/configs/mpc30x_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -817,7 +816,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/msp71xx_defconfig b/trunk/arch/mips/configs/msp71xx_defconfig index ecbc030b7b6c..000d185ddf42 100644 --- a/trunk/arch/mips/configs/msp71xx_defconfig +++ b/trunk/arch/mips/configs/msp71xx_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1412,7 +1411,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set # CONFIG_MIPS_UNCACHED is not set diff --git a/trunk/arch/mips/configs/mtx1_defconfig b/trunk/arch/mips/configs/mtx1_defconfig index 9477f040796d..144b94d9a6ad 100644 --- a/trunk/arch/mips/configs/mtx1_defconfig +++ b/trunk/arch/mips/configs/mtx1_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # CONFIG_MACH_ALCHEMY=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -3018,7 +3017,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/pb1100_defconfig b/trunk/arch/mips/configs/pb1100_defconfig index be8091ef0a79..ddf67f639194 100644 --- a/trunk/arch/mips/configs/pb1100_defconfig +++ b/trunk/arch/mips/configs/pb1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1083,7 +1082,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/pb1500_defconfig b/trunk/arch/mips/configs/pb1500_defconfig index e74ba794c789..5ec60836b645 100644 --- a/trunk/arch/mips/configs/pb1500_defconfig +++ b/trunk/arch/mips/configs/pb1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1200,7 +1199,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/pb1550_defconfig b/trunk/arch/mips/configs/pb1550_defconfig index 1d896fd830da..6647642b5d97 100644 --- a/trunk/arch/mips/configs/pb1550_defconfig +++ b/trunk/arch/mips/configs/pb1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1193,7 +1192,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/pnx8335-stb225_defconfig b/trunk/arch/mips/configs/pnx8335-stb225_defconfig index fef4d31c2055..848344d588d1 100644 --- a/trunk/arch/mips/configs/pnx8335-stb225_defconfig +++ b/trunk/arch/mips/configs/pnx8335-stb225_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1034,7 +1033,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set # CONFIG_KERNEL_TESTS is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/pnx8550-jbs_defconfig b/trunk/arch/mips/configs/pnx8550-jbs_defconfig index e10c7116c3c2..9d721fdccb30 100644 --- a/trunk/arch/mips/configs/pnx8550-jbs_defconfig +++ b/trunk/arch/mips/configs/pnx8550-jbs_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1215,7 +1214,9 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/trunk/arch/mips/configs/pnx8550-stb810_defconfig b/trunk/arch/mips/configs/pnx8550-stb810_defconfig index 5ed3c8dfa0a1..ab07ec08c6fa 100644 --- a/trunk/arch/mips/configs/pnx8550-stb810_defconfig +++ b/trunk/arch/mips/configs/pnx8550-stb810_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1205,7 +1204,9 @@ CONFIG_DEBUG_SLAB=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_OVERRIDE is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/trunk/arch/mips/configs/powertv_defconfig b/trunk/arch/mips/configs/powertv_defconfig new file mode 100644 index 000000000000..7291633d81cc --- /dev/null +++ b/trunk/arch/mips/configs/powertv_defconfig @@ -0,0 +1,1550 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc5 +# Fri Aug 28 14:49:33 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +CONFIG_POWERTV=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIN_RUNTIME_RESOURCES is not set +# CONFIG_BOOTLOADER_DRIVER is not set +CONFIG_BOOTLOADER_FAMILY="R2" +CONFIG_CSRC_POWERTV=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_EARLY_PRINTK is not set +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_MIPSR2_IRQ_EI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_HIGHMEM is not set +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +CONFIG_HZ_1000=y +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=1000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +CONFIG_TIMERFD=y +# CONFIG_EVENTFD is not set +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=y +CONFIG_INET6_TUNNEL=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +CONFIG_IPV6_TUNNEL=y +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +# CONFIG_BRIDGE_NETFILTER is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=y +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=y +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=y +CONFIG_IP_NF_ARPFILTER=y +# CONFIG_IP_NF_ARP_MANGLE is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=y +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_TARGET_LOG is not set +CONFIG_IP6_NF_FILTER=y +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_MANGLE is not set +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=y +CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +CONFIG_NET_SCH_TBF=y +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +CONFIG_USB_SERIAL_CP210X=y +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M" +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/trunk/arch/mips/configs/rb532_defconfig b/trunk/arch/mips/configs/rb532_defconfig index f40c3a04739d..57a50483abdf 100644 --- a/trunk/arch/mips/configs/rb532_defconfig +++ b/trunk/arch/mips/configs/rb532_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1204,7 +1203,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/rbtx49xx_defconfig b/trunk/arch/mips/configs/rbtx49xx_defconfig index 6c6a19aebe1f..21c2022d46ee 100644 --- a/trunk/arch/mips/configs/rbtx49xx_defconfig +++ b/trunk/arch/mips/configs/rbtx49xx_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set @@ -284,7 +283,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_FREEZER is not set # @@ -1063,7 +1061,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/rm200_defconfig b/trunk/arch/mips/configs/rm200_defconfig index e53b8d096cfc..790362890033 100644 --- a/trunk/arch/mips/configs/rm200_defconfig +++ b/trunk/arch/mips/configs/rm200_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -1694,7 +1693,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # # Security options diff --git a/trunk/arch/mips/configs/sb1250-swarm_defconfig b/trunk/arch/mips/configs/sb1250-swarm_defconfig index 7f38c0b956f3..7f07bf02b838 100644 --- a/trunk/arch/mips/configs/sb1250-swarm_defconfig +++ b/trunk/arch/mips/configs/sb1250-swarm_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -961,7 +960,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_SB1XXX_CORELIS is not set # diff --git a/trunk/arch/mips/configs/tb0219_defconfig b/trunk/arch/mips/configs/tb0219_defconfig index b5059881bc7e..c54d1128f9a3 100644 --- a/trunk/arch/mips/configs/tb0219_defconfig +++ b/trunk/arch/mips/configs/tb0219_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -892,7 +891,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/tb0226_defconfig b/trunk/arch/mips/configs/tb0226_defconfig index b06a716bf23f..e7c5cd32a2bd 100644 --- a/trunk/arch/mips/configs/tb0226_defconfig +++ b/trunk/arch/mips/configs/tb0226_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -895,7 +894,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/tb0287_defconfig b/trunk/arch/mips/configs/tb0287_defconfig index 46512cf7ce04..b50032ba4d01 100644 --- a/trunk/arch/mips/configs/tb0287_defconfig +++ b/trunk/arch/mips/configs/tb0287_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set @@ -1077,7 +1076,9 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/workpad_defconfig b/trunk/arch/mips/configs/workpad_defconfig index b437eb7f8672..c02ba08b69ab 100644 --- a/trunk/arch/mips/configs/workpad_defconfig +++ b/trunk/arch/mips/configs/workpad_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -755,7 +754,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/wrppmc_defconfig b/trunk/arch/mips/configs/wrppmc_defconfig index 06acc7482e4c..a35bc41389e5 100644 --- a/trunk/arch/mips/configs/wrppmc_defconfig +++ b/trunk/arch/mips/configs/wrppmc_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -887,7 +886,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200n8" +# CONFIG_CMDLINE_OVERRIDE is not set # # Security options diff --git a/trunk/arch/mips/configs/yosemite_defconfig b/trunk/arch/mips/configs/yosemite_defconfig index 69feaf88b510..e3d68d651e7d 100644 --- a/trunk/arch/mips/configs/yosemite_defconfig +++ b/trunk/arch/mips/configs/yosemite_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set @@ -824,7 +823,7 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set diff --git a/trunk/arch/mips/fw/arc/cmdline.c b/trunk/arch/mips/fw/arc/cmdline.c index 4ca4eef934a5..5c8603c85f20 100644 --- a/trunk/arch/mips/fw/arc/cmdline.c +++ b/trunk/arch/mips/fw/arc/cmdline.c @@ -16,11 +16,6 @@ #undef DEBUG_CMDLINE -char * __init prom_getcmdline(void) -{ - return arcs_cmdline; -} - static char *ignored[] = { "ConsoleIn=", "ConsoleOut=", diff --git a/trunk/arch/mips/include/asm/asm-offsets.h b/trunk/arch/mips/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/mips/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/mips/include/asm/bootinfo.h b/trunk/arch/mips/include/asm/bootinfo.h index f5dfaf6a1606..09eee09780f2 100644 --- a/trunk/arch/mips/include/asm/bootinfo.h +++ b/trunk/arch/mips/include/asm/bootinfo.h @@ -67,9 +67,9 @@ #define MACH_LEMOTE_ML2F7 3 #define MACH_LEMOTE_YL2F89 4 #define MACH_DEXXON_GDIUM2F10 5 -#define MACH_LOONGSON_END 6 - -#define CL_SIZE COMMAND_LINE_SIZE +#define MACH_LEMOTE_NAS 6 +#define MACH_LEMOTE_LL2F 7 +#define MACH_LOONGSON_END 8 extern char *system_type; const char *get_system_type(void); @@ -107,7 +107,7 @@ extern void free_init_pages(const char *what, /* * Initial kernel command line, usually setup by prom_init() */ -extern char arcs_cmdline[CL_SIZE]; +extern char arcs_cmdline[COMMAND_LINE_SIZE]; /* * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware diff --git a/trunk/arch/mips/include/asm/clock.h b/trunk/arch/mips/include/asm/clock.h new file mode 100644 index 000000000000..83894aa7932c --- /dev/null +++ b/trunk/arch/mips/include/asm/clock.h @@ -0,0 +1,64 @@ +#ifndef __ASM_MIPS_CLOCK_H +#define __ASM_MIPS_CLOCK_H + +#include +#include +#include +#include + +extern void (*cpu_wait) (void); + +struct clk; + +struct clk_ops { + void (*init) (struct clk *clk); + void (*enable) (struct clk *clk); + void (*disable) (struct clk *clk); + void (*recalc) (struct clk *clk); + int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id); + long (*round_rate) (struct clk *clk, unsigned long rate); +}; + +struct clk { + struct list_head node; + const char *name; + int id; + struct module *owner; + + struct clk *parent; + struct clk_ops *ops; + + struct kref kref; + + unsigned long rate; + unsigned long flags; +}; + +#define CLK_ALWAYS_ENABLED (1 << 0) +#define CLK_RATE_PROPAGATES (1 << 1) + +/* Should be defined by processor-specific code */ +void arch_init_clk_ops(struct clk_ops **, int type); + +int clk_init(void); + +int __clk_enable(struct clk *); +void __clk_disable(struct clk *); + +void clk_recalc_rate(struct clk *); + +int clk_register(struct clk *); +void clk_unregister(struct clk *); + +/* the exported API, in addition to clk_set_rate */ +/** + * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter + * @clk: clock source + * @rate: desired clock rate in Hz + * @algo_id: algorithm id to be passed down to ops->set_rate + * + * Returns success (0) or negative errno. + */ +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); + +#endif /* __ASM_MIPS_CLOCK_H */ diff --git a/trunk/arch/mips/include/asm/cop2.h b/trunk/arch/mips/include/asm/cop2.h new file mode 100644 index 000000000000..6b04c98b7fad --- /dev/null +++ b/trunk/arch/mips/include/asm/cop2.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle + */ +#ifndef __ASM_COP2_H +#define __ASM_COP2_H + +enum cu2_ops { + CU2_EXCEPTION, + CU2_LWC2_OP, + CU2_LDC2_OP, + CU2_SWC2_OP, + CU2_SDC2_OP, +}; + +extern int register_cu2_notifier(struct notifier_block *nb); +extern int cu2_notifier_call_chain(unsigned long val, void *v); + +#endif /* __ASM_COP2_H */ diff --git a/trunk/arch/mips/include/asm/cpu.h b/trunk/arch/mips/include/asm/cpu.h index 4b96d1a36056..cf373a95fe4a 100644 --- a/trunk/arch/mips/include/asm/cpu.h +++ b/trunk/arch/mips/include/asm/cpu.h @@ -154,6 +154,8 @@ #define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */ #define PRID_REV_VR4130 0x0080 #define PRID_REV_34K_V1_0_2 0x0022 +#define PRID_REV_LOONGSON2E 0x0002 +#define PRID_REV_LOONGSON2F 0x0003 /* * Older processors used to encode processor version and revision in two diff --git a/trunk/arch/mips/include/asm/elf.h b/trunk/arch/mips/include/asm/elf.h index 7990694cda22..7a6a35dbe529 100644 --- a/trunk/arch/mips/include/asm/elf.h +++ b/trunk/arch/mips/include/asm/elf.h @@ -326,7 +326,6 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ dump_task_fpu(tsk, elf_fpregs) -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE PAGE_SIZE /* This yields a mask that user programs can use to figure out what diff --git a/trunk/arch/mips/include/asm/fcntl.h b/trunk/arch/mips/include/asm/fcntl.h index 7c6681aa2ab8..e482fe90fe88 100644 --- a/trunk/arch/mips/include/asm/fcntl.h +++ b/trunk/arch/mips/include/asm/fcntl.h @@ -19,7 +19,7 @@ #define FASYNC 0x1000 /* fcntl, for BSD compatibility */ #define O_LARGEFILE 0x2000 /* allow large file opens */ /* - * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using * the O_SYNC flag. We continue to use the existing numerical value * for O_DSYNC semantics now, but using the correct symbolic name for it. * This new value is used to request true Posix O_SYNC semantics. It is diff --git a/trunk/arch/mips/include/asm/fpu.h b/trunk/arch/mips/include/asm/fpu.h index 8a3ef247659a..7fcef8ef3fab 100644 --- a/trunk/arch/mips/include/asm/fpu.h +++ b/trunk/arch/mips/include/asm/fpu.h @@ -28,15 +28,7 @@ struct sigcontext; struct sigcontext32; -extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); -extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); - -extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); -extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); - extern void fpu_emulator_init_fpu(void); -extern int fpu_emulator_save_context(struct sigcontext __user *sc); -extern int fpu_emulator_restore_context(struct sigcontext __user *sc); extern void _init_fpu(void); extern void _save_fp(struct task_struct *); extern void _restore_fp(struct task_struct *); diff --git a/trunk/arch/mips/include/asm/fpu_emulator.h b/trunk/arch/mips/include/asm/fpu_emulator.h index e5189572956c..aecada6f6117 100644 --- a/trunk/arch/mips/include/asm/fpu_emulator.h +++ b/trunk/arch/mips/include/asm/fpu_emulator.h @@ -25,17 +25,27 @@ #include #include +#include + +#ifdef CONFIG_DEBUG_FS struct mips_fpu_emulator_stats { - unsigned int emulated; - unsigned int loads; - unsigned int stores; - unsigned int cp1ops; - unsigned int cp1xops; - unsigned int errors; + local_t emulated; + local_t loads; + local_t stores; + local_t cp1ops; + local_t cp1xops; + local_t errors; }; -extern struct mips_fpu_emulator_stats fpuemustats; +DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); + +#define MIPS_FPU_EMU_INC_STATS(M) \ + cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M)) + +#else +#define MIPS_FPU_EMU_INC_STATS(M) do { } while (0) +#endif /* CONFIG_DEBUG_FS */ extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc); diff --git a/trunk/arch/mips/include/asm/ftrace.h b/trunk/arch/mips/include/asm/ftrace.h index 40a8c178f10d..3986cd8704f3 100644 --- a/trunk/arch/mips/include/asm/ftrace.h +++ b/trunk/arch/mips/include/asm/ftrace.h @@ -1 +1,90 @@ -/* empty */ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + * + * Copyright (C) 2009 DSLab, Lanzhou University, China + * Author: Wu Zhangjin + */ + +#ifndef _ASM_MIPS_FTRACE_H +#define _ASM_MIPS_FTRACE_H + +#ifdef CONFIG_FUNCTION_TRACER + +#define MCOUNT_ADDR ((unsigned long)(_mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +#define mcount _mcount + +#define safe_load(load, src, dst, error) \ +do { \ + asm volatile ( \ + "1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\ + " li %[" STR(error) "], 0\n" \ + "2:\n" \ + \ + ".section .fixup, \"ax\"\n" \ + "3: li %[" STR(error) "], 1\n" \ + " j 2b\n" \ + ".previous\n" \ + \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR) "\t1b, 3b\n\t" \ + ".previous\n" \ + \ + : [dst] "=&r" (dst), [error] "=r" (error)\ + : [src] "r" (src) \ + : "memory" \ + ); \ +} while (0) + +#define safe_store(store, src, dst, error) \ +do { \ + asm volatile ( \ + "1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\ + " li %[" STR(error) "], 0\n" \ + "2:\n" \ + \ + ".section .fixup, \"ax\"\n" \ + "3: li %[" STR(error) "], 1\n" \ + " j 2b\n" \ + ".previous\n" \ + \ + ".section\t__ex_table,\"a\"\n\t"\ + STR(PTR) "\t1b, 3b\n\t" \ + ".previous\n" \ + \ + : [error] "=r" (error) \ + : [dst] "r" (dst), [src] "r" (src)\ + : "memory" \ + ); \ +} while (0) + +#define safe_load_code(dst, src, error) \ + safe_load(STR(lw), src, dst, error) +#define safe_store_code(src, dst, error) \ + safe_store(STR(sw), src, dst, error) + +#define safe_load_stack(dst, src, error) \ + safe_load(STR(PTR_L), src, dst, error) + +#define safe_store_stack(src, dst, error) \ + safe_store(STR(PTR_S), src, dst, error) + + +#ifdef CONFIG_DYNAMIC_FTRACE +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + return addr; +} + +struct dyn_arch_ftrace { +}; + +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_FUNCTION_TRACER */ +#endif /* _ASM_MIPS_FTRACE_H */ diff --git a/trunk/arch/mips/include/asm/irq.h b/trunk/arch/mips/include/asm/irq.h index 09b08d05ff72..06960364c96b 100644 --- a/trunk/arch/mips/include/asm/irq.h +++ b/trunk/arch/mips/include/asm/irq.h @@ -113,36 +113,11 @@ do { \ #endif -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - * - * Ideally there should be away to get this into kernel/irq/handle.c to - * avoid the overhead of a call for just a tiny function ... - */ -#define do_IRQ(irq) \ -do { \ - irq_enter(); \ - __DO_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) +extern void do_IRQ(unsigned int irq); #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF -/* - * To avoid inefficient and in some cases pathological re-checking of - * IRQ affinity, we have this variant that skips the affinity check. - */ - -#define do_IRQ_no_affinity(irq) \ -do { \ - irq_enter(); \ - __NO_AFFINITY_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) +extern void do_IRQ_no_affinity(unsigned int irq); #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/trunk/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/trunk/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h deleted file mode 100644 index 107104c3cd12..000000000000 --- a/trunk/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Thomas Koeller - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H - -/* - * Basler eXcite has an RM9122 processor. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/trunk/arch/mips/include/asm/mach-excite/excite.h b/trunk/arch/mips/include/asm/mach-excite/excite.h deleted file mode 100644 index 4c29ba44992c..000000000000 --- a/trunk/arch/mips/include/asm/mach-excite/excite.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef __EXCITE_H__ -#define __EXCITE_H__ - -#include -#include -#include - -#define EXCITE_CPU_EXT_CLOCK 100000000 - -#if !defined(__ASSEMBLY__) -void __init excite_kgdb_init(void); -void excite_procfs_init(void); -extern unsigned long memsize; -extern char modetty[]; -extern u32 unit_id; -#endif - -/* Base name for XICAP devices */ -#define XICAP_NAME "xicap_gpi" - -/* OCD register offsets */ -#define LKB0 0x0038 -#define LKB5 0x0128 -#define LKM5 0x012C -#define LKB7 0x0138 -#define LKM7 0x013c -#define LKB8 0x0140 -#define LKM8 0x0144 -#define LKB9 0x0148 -#define LKM9 0x014c -#define LKB10 0x0150 -#define LKM10 0x0154 -#define LKB11 0x0158 -#define LKM11 0x015c -#define LKB12 0x0160 -#define LKM12 0x0164 -#define LKB13 0x0168 -#define LKM13 0x016c -#define LDP0 0x0200 -#define LDP1 0x0210 -#define LDP2 0x0220 -#define LDP3 0x0230 -#define INTPIN0 0x0A40 -#define INTPIN1 0x0A44 -#define INTPIN2 0x0A48 -#define INTPIN3 0x0A4C -#define INTPIN4 0x0A50 -#define INTPIN5 0x0A54 -#define INTPIN6 0x0A58 -#define INTPIN7 0x0A5C - - - - -/* TITAN register offsets */ -#define CPRR 0x0004 -#define CPDSR 0x0008 -#define CPTC0R 0x000c -#define CPTC1R 0x0010 -#define CPCFG0 0x0020 -#define CPCFG1 0x0024 -#define CPDST0A 0x0028 -#define CPDST0B 0x002c -#define CPDST1A 0x0030 -#define CPDST1B 0x0034 -#define CPXDSTA 0x0038 -#define CPXDSTB 0x003c -#define CPXCISRA 0x0048 -#define CPXCISRB 0x004c -#define CPGIG0ER 0x0050 -#define CPGIG1ER 0x0054 -#define CPGRWL 0x0068 -#define CPURSLMT 0x00f8 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define SDRXFCIE 0x4828 -#define SDTXFCIE 0x4928 -#define INTP0Status0 0x1B00 -#define INTP0Mask0 0x1B04 -#define INTP0Set0 0x1B08 -#define INTP0Clear0 0x1B0C -#define GXCFG 0x5000 -#define GXDMADRPFX 0x5018 -#define GXDMA_DESCADR 0x501c -#define GXCH0TDESSTRT 0x5054 - -/* IRQ definitions */ -#define NMICONFIG 0xac0 -#define TITAN_MSGINT 0xc4 -#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) -#define FPGA0_MSGINT 0x5a -#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) -#define FPGA1_MSGINT 0x7b -#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) -#define PHY_MSGINT 0x9c -#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) - -#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) -/* Pre-release units used interrupt pin #9 */ -#define USB_IRQ 11 -#else -/* Re-designed units use interrupt pin #1 */ -#define USB_MSGINT 0x39 -#define USB_IRQ ((USB_MSGINT / 0x20) + 2) -#endif -#define TIMER_IRQ 12 - - -/* Device address ranges */ -#define EXCITE_OFFS_OCD 0x1fffc000 -#define EXCITE_SIZE_OCD (16 * 1024) -#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) -#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) - -#define EXCITE_OFFS_SCRAM 0x1fffa000 -#define EXCITE_SIZE_SCRAM (8 << 10) -#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) -#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) - -#define EXCITE_OFFS_PCI_IO 0x1fff8000 -#define EXCITE_SIZE_PCI_IO (8 << 10) -#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) -#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) - -#define EXCITE_OFFS_TITAN 0x1fff0000 -#define EXCITE_SIZE_TITAN (32 << 10) -#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) -#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) - -#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 -#define EXCITE_SIZE_PCI_MEM (64 << 10) -#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) -#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) - -#define EXCITE_OFFS_FPGA 0x1ffdc000 -#define EXCITE_SIZE_FPGA (16 << 10) -#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) -#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) - -#define EXCITE_OFFS_NAND 0x1ffd8000 -#define EXCITE_SIZE_NAND (16 << 10) -#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) -#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) - -#define EXCITE_OFFS_BOOTROM 0x1f000000 -#define EXCITE_SIZE_BOOTROM (8 << 20) -#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) -#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) - -/* FPGA address offsets */ -#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ -#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ - -#endif /* __EXCITE_H__ */ diff --git a/trunk/arch/mips/include/asm/mach-excite/excite_fpga.h b/trunk/arch/mips/include/asm/mach-excite/excite_fpga.h deleted file mode 100644 index 0a1ef69bece7..000000000000 --- a/trunk/arch/mips/include/asm/mach-excite/excite_fpga.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef EXCITE_FPGA_H_INCLUDED -#define EXCITE_FPGA_H_INCLUDED - - -/** - * Address alignment of the individual FPGA bytes. - * The address arrangement of the individual bytes of the FPGA is two - * byte aligned at the embedded MK2 platform. - */ -#ifdef EXCITE_CCI_FPGA_MK2 -typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); -#else -typedef unsigned char excite_cci_fpga_align_t; -#endif - - -/** - * Size of Dual Ported RAM. - */ -#define EXCITE_DPR_SIZE 263 - - -/** - * Size of Reserved Status Fields in Dual Ported RAM. - */ -#define EXCITE_DPR_STATUS_SIZE 7 - - - -/** - * FPGA. - * Hardware register layout of the FPGA interface. The FPGA must accessed - * byte wise solely. - * @see EXCITE_CCI_DPR_MK2 - */ -typedef struct excite_fpga { - - /** - * Dual Ported RAM. - */ - excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; - - /** - * Status. - */ - excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; - -#ifdef EXCITE_CCI_FPGA_MK2 - /** - * RM9000 Interrupt. - * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. - */ - excite_cci_fpga_align_t rm9k_int; -#else - /** - * MK2 Interrupt. - * Write access initiates interrupt at the ARM processor of the MK2. - */ - excite_cci_fpga_align_t mk2_int; - - excite_cci_fpga_align_t gap[0x1000-0x10f]; - - /** - * IRQ Source/Acknowledge. - */ - excite_cci_fpga_align_t rm9k_irq_src; - - /** - * IRQ Mask. - * Set bits enable the related interrupt. - */ - excite_cci_fpga_align_t rm9k_irq_mask; -#endif - - -} excite_fpga; - - - -#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/trunk/arch/mips/include/asm/mach-excite/excite_nandflash.h b/trunk/arch/mips/include/asm/mach-excite/excite_nandflash.h deleted file mode 100644 index c4cf6140622e..000000000000 --- a/trunk/arch/mips/include/asm/mach-excite/excite_nandflash.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __EXCITE_NANDFLASH_H__ -#define __EXCITE_NANDFLASH_H__ - -/* Resource names */ -#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" - -#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/trunk/arch/mips/include/asm/mach-excite/rm9k_eth.h b/trunk/arch/mips/include/asm/mach-excite/rm9k_eth.h deleted file mode 100644 index 94705a46f72e..000000000000 --- a/trunk/arch/mips/include/asm/mach-excite/rm9k_eth.h +++ /dev/null @@ -1,23 +0,0 @@ -#if !defined(__RM9K_ETH_H__) -#define __RM9K_ETH_H__ - -#define RM9K_GE_NAME "rm9k_ge" - -/* Resource names */ -#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" -#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" -#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" -#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" -#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" -#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" -#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" -#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" -#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" -#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" -#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" -#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" -#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" -#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" -#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" - -#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/trunk/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/trunk/arch/mips/include/asm/mach-excite/rm9k_wdt.h deleted file mode 100644 index 3fa3c08d2da7..000000000000 --- a/trunk/arch/mips/include/asm/mach-excite/rm9k_wdt.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __RM9K_WDT_H__ -#define __RM9K_WDT_H__ - -/* Device name */ -#define WDT_NAME "wdt_gpi" - -/* Resource names */ -#define WDT_RESOURCE_REGS "excite_watchdog_regs" -#define WDT_RESOURCE_IRQ "excite_watchdog_irq" -#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" - -#endif /* __RM9K_WDT_H__ */ diff --git a/trunk/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/trunk/arch/mips/include/asm/mach-excite/rm9k_xicap.h deleted file mode 100644 index 009577734a8d..000000000000 --- a/trunk/arch/mips/include/asm/mach-excite/rm9k_xicap.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __EXCITE_XICAP_H__ -#define __EXCITE_XICAP_H__ - - -/* Resource names */ -#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" -#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" -#define XICAP_RESOURCE_XDMA "xicap_xdma" -#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" -#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" -#define XICAP_RESOURCE_IRQ "xicap_irq" -#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" -#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" -#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" - -#endif /* __EXCITE_XICAP_H__ */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h new file mode 100644 index 000000000000..021f77ca59ec --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h @@ -0,0 +1,305 @@ +/* + * The header file of cs5536 sourth bridge. + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu + */ + +#ifndef _CS5536_H +#define _CS5536_H + +#include + +extern void _rdmsr(u32 msr, u32 *hi, u32 *lo); +extern void _wrmsr(u32 msr, u32 hi, u32 lo); + +/* + * MSR module base + */ +#define CS5536_SB_MSR_BASE (0x00000000) +#define CS5536_GLIU_MSR_BASE (0x10000000) +#define CS5536_ILLEGAL_MSR_BASE (0x20000000) +#define CS5536_USB_MSR_BASE (0x40000000) +#define CS5536_IDE_MSR_BASE (0x60000000) +#define CS5536_DIVIL_MSR_BASE (0x80000000) +#define CS5536_ACC_MSR_BASE (0xa0000000) +#define CS5536_UNUSED_MSR_BASE (0xc0000000) +#define CS5536_GLCP_MSR_BASE (0xe0000000) + +#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset)) +#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset)) +#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset)) +#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset)) +#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset)) +#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset)) +#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset)) +#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset)) +#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset)) + +/* + * BAR SPACE OF VIRTUAL PCI : + * range for pci probe use, length is the actual size. + */ +/* IO space for all DIVIL modules */ +#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */ +#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */ +#define CS5536_SMB_RANGE 0xfffffff8 +#define CS5536_SMB_LENGTH 0x08 +#define CS5536_GPIO_RANGE 0xffffff00 +#define CS5536_GPIO_LENGTH 0x100 +#define CS5536_MFGPT_RANGE 0xffffffc0 +#define CS5536_MFGPT_LENGTH 0x40 +#define CS5536_ACPI_RANGE 0xffffffe0 +#define CS5536_ACPI_LENGTH 0x20 +#define CS5536_PMS_RANGE 0xffffff80 +#define CS5536_PMS_LENGTH 0x80 +/* IO space for IDE */ +#define CS5536_IDE_RANGE 0xfffffff0 +#define CS5536_IDE_LENGTH 0x10 +/* IO space for ACC */ +#define CS5536_ACC_RANGE 0xffffff80 +#define CS5536_ACC_LENGTH 0x80 +/* MEM space for ALL USB modules */ +#define CS5536_OHCI_RANGE 0xfffff000 +#define CS5536_OHCI_LENGTH 0x1000 +#define CS5536_EHCI_RANGE 0xfffff000 +#define CS5536_EHCI_LENGTH 0x1000 + +/* + * PCI MSR ACCESS + */ +#define PCI_MSR_CTRL 0xF0 +#define PCI_MSR_ADDR 0xF4 +#define PCI_MSR_DATA_LO 0xF8 +#define PCI_MSR_DATA_HI 0xFC + +/**************** MSR *****************************/ + +/* + * GLIU STANDARD MSR + */ +#define GLIU_CAP 0x00 +#define GLIU_CONFIG 0x01 +#define GLIU_SMI 0x02 +#define GLIU_ERROR 0x03 +#define GLIU_PM 0x04 +#define GLIU_DIAG 0x05 + +/* + * GLIU SPEC. MSR + */ +#define GLIU_P2D_BM0 0x20 +#define GLIU_P2D_BM1 0x21 +#define GLIU_P2D_BM2 0x22 +#define GLIU_P2D_BMK0 0x23 +#define GLIU_P2D_BMK1 0x24 +#define GLIU_P2D_BM3 0x25 +#define GLIU_P2D_BM4 0x26 +#define GLIU_COH 0x80 +#define GLIU_PAE 0x81 +#define GLIU_ARB 0x82 +#define GLIU_ASMI 0x83 +#define GLIU_AERR 0x84 +#define GLIU_DEBUG 0x85 +#define GLIU_PHY_CAP 0x86 +#define GLIU_NOUT_RESP 0x87 +#define GLIU_NOUT_WDATA 0x88 +#define GLIU_WHOAMI 0x8B +#define GLIU_SLV_DIS 0x8C +#define GLIU_IOD_BM0 0xE0 +#define GLIU_IOD_BM1 0xE1 +#define GLIU_IOD_BM2 0xE2 +#define GLIU_IOD_BM3 0xE3 +#define GLIU_IOD_BM4 0xE4 +#define GLIU_IOD_BM5 0xE5 +#define GLIU_IOD_BM6 0xE6 +#define GLIU_IOD_BM7 0xE7 +#define GLIU_IOD_BM8 0xE8 +#define GLIU_IOD_BM9 0xE9 +#define GLIU_IOD_SC0 0xEA +#define GLIU_IOD_SC1 0xEB +#define GLIU_IOD_SC2 0xEC +#define GLIU_IOD_SC3 0xED +#define GLIU_IOD_SC4 0xEE +#define GLIU_IOD_SC5 0xEF +#define GLIU_IOD_SC6 0xF0 +#define GLIU_IOD_SC7 0xF1 + +/* + * SB STANDARD + */ +#define SB_CAP 0x00 +#define SB_CONFIG 0x01 +#define SB_SMI 0x02 +#define SB_ERROR 0x03 +#define SB_MAR_ERR_EN 0x00000001 +#define SB_TAR_ERR_EN 0x00000002 +#define SB_RSVD_BIT1 0x00000004 +#define SB_EXCEP_ERR_EN 0x00000008 +#define SB_SYSE_ERR_EN 0x00000010 +#define SB_PARE_ERR_EN 0x00000020 +#define SB_TAS_ERR_EN 0x00000040 +#define SB_MAR_ERR_FLAG 0x00010000 +#define SB_TAR_ERR_FLAG 0x00020000 +#define SB_RSVD_BIT2 0x00040000 +#define SB_EXCEP_ERR_FLAG 0x00080000 +#define SB_SYSE_ERR_FLAG 0x00100000 +#define SB_PARE_ERR_FLAG 0x00200000 +#define SB_TAS_ERR_FLAG 0x00400000 +#define SB_PM 0x04 +#define SB_DIAG 0x05 + +/* + * SB SPEC. + */ +#define SB_CTRL 0x10 +#define SB_R0 0x20 +#define SB_R1 0x21 +#define SB_R2 0x22 +#define SB_R3 0x23 +#define SB_R4 0x24 +#define SB_R5 0x25 +#define SB_R6 0x26 +#define SB_R7 0x27 +#define SB_R8 0x28 +#define SB_R9 0x29 +#define SB_R10 0x2A +#define SB_R11 0x2B +#define SB_R12 0x2C +#define SB_R13 0x2D +#define SB_R14 0x2E +#define SB_R15 0x2F + +/* + * GLCP STANDARD + */ +#define GLCP_CAP 0x00 +#define GLCP_CONFIG 0x01 +#define GLCP_SMI 0x02 +#define GLCP_ERROR 0x03 +#define GLCP_PM 0x04 +#define GLCP_DIAG 0x05 + +/* + * GLCP SPEC. + */ +#define GLCP_CLK_DIS_DELAY 0x08 +#define GLCP_PM_CLK_DISABLE 0x09 +#define GLCP_GLB_PM 0x0B +#define GLCP_DBG_OUT 0x0C +#define GLCP_RSVD1 0x0D +#define GLCP_SOFT_COM 0x0E +#define SOFT_BAR_SMB_FLAG 0x00000001 +#define SOFT_BAR_GPIO_FLAG 0x00000002 +#define SOFT_BAR_MFGPT_FLAG 0x00000004 +#define SOFT_BAR_IRQ_FLAG 0x00000008 +#define SOFT_BAR_PMS_FLAG 0x00000010 +#define SOFT_BAR_ACPI_FLAG 0x00000020 +#define SOFT_BAR_IDE_FLAG 0x00000400 +#define SOFT_BAR_ACC_FLAG 0x00000800 +#define SOFT_BAR_OHCI_FLAG 0x00001000 +#define SOFT_BAR_EHCI_FLAG 0x00002000 +#define GLCP_RSVD2 0x0F +#define GLCP_CLK_OFF 0x10 +#define GLCP_CLK_ACTIVE 0x11 +#define GLCP_CLK_DISABLE 0x12 +#define GLCP_CLK4ACK 0x13 +#define GLCP_SYS_RST 0x14 +#define GLCP_RSVD3 0x15 +#define GLCP_DBG_CLK_CTRL 0x16 +#define GLCP_CHIP_REV_ID 0x17 + +/* PIC */ +#define PIC_YSEL_LOW 0x20 +#define PIC_YSEL_LOW_USB_SHIFT 8 +#define PIC_YSEL_LOW_ACC_SHIFT 16 +#define PIC_YSEL_LOW_FLASH_SHIFT 24 +#define PIC_YSEL_HIGH 0x21 +#define PIC_ZSEL_LOW 0x22 +#define PIC_ZSEL_HIGH 0x23 +#define PIC_IRQM_PRIM 0x24 +#define PIC_IRQM_LPC 0x25 +#define PIC_XIRR_STS_LOW 0x26 +#define PIC_XIRR_STS_HIGH 0x27 +#define PCI_SHDW 0x34 + +/* + * DIVIL STANDARD + */ +#define DIVIL_CAP 0x00 +#define DIVIL_CONFIG 0x01 +#define DIVIL_SMI 0x02 +#define DIVIL_ERROR 0x03 +#define DIVIL_PM 0x04 +#define DIVIL_DIAG 0x05 + +/* + * DIVIL SPEC. + */ +#define DIVIL_LBAR_IRQ 0x08 +#define DIVIL_LBAR_KEL 0x09 +#define DIVIL_LBAR_SMB 0x0B +#define DIVIL_LBAR_GPIO 0x0C +#define DIVIL_LBAR_MFGPT 0x0D +#define DIVIL_LBAR_ACPI 0x0E +#define DIVIL_LBAR_PMS 0x0F +#define DIVIL_LEG_IO 0x14 +#define DIVIL_BALL_OPTS 0x15 +#define DIVIL_SOFT_IRQ 0x16 +#define DIVIL_SOFT_RESET 0x17 + +/* MFGPT */ +#define MFGPT_IRQ 0x28 + +/* + * IDE STANDARD + */ +#define IDE_CAP 0x00 +#define IDE_CONFIG 0x01 +#define IDE_SMI 0x02 +#define IDE_ERROR 0x03 +#define IDE_PM 0x04 +#define IDE_DIAG 0x05 + +/* + * IDE SPEC. + */ +#define IDE_IO_BAR 0x08 +#define IDE_CFG 0x10 +#define IDE_DTC 0x12 +#define IDE_CAST 0x13 +#define IDE_ETC 0x14 +#define IDE_INTERNAL_PM 0x15 + +/* + * ACC STANDARD + */ +#define ACC_CAP 0x00 +#define ACC_CONFIG 0x01 +#define ACC_SMI 0x02 +#define ACC_ERROR 0x03 +#define ACC_PM 0x04 +#define ACC_DIAG 0x05 + +/* + * USB STANDARD + */ +#define USB_CAP 0x00 +#define USB_CONFIG 0x01 +#define USB_SMI 0x02 +#define USB_ERROR 0x03 +#define USB_PM 0x04 +#define USB_DIAG 0x05 + +/* + * USB SPEC. + */ +#define USB_OHCI 0x08 +#define USB_EHCI 0x09 + +/****************** NATIVE ***************************/ +/* GPIO : I/O SPACE; REG : 32BITS */ +#define GPIOL_OUT_VAL 0x00 +#define GPIOL_OUT_EN 0x04 + +#endif /* _CS5536_H */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h new file mode 100644 index 000000000000..4b493d6772c2 --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h @@ -0,0 +1,35 @@ +/* + * cs5536 mfgpt header file + */ + +#ifndef _CS5536_MFGPT_H +#define _CS5536_MFGPT_H + +#include +#include + +#ifdef CONFIG_CS5536_MFGPT +extern void setup_mfgpt0_timer(void); +extern void disable_mfgpt0_counter(void); +extern void enable_mfgpt0_counter(void); +#else +static inline void __maybe_unused setup_mfgpt0_timer(void) +{ +} +static inline void __maybe_unused disable_mfgpt0_counter(void) +{ +} +static inline void __maybe_unused enable_mfgpt0_counter(void) +{ +} +#endif + +#define MFGPT_TICK_RATE 14318000 +#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ) + +#define MFGPT_BASE mfgpt_base +#define MFGPT0_CMP2 (MFGPT_BASE + 2) +#define MFGPT0_CNT (MFGPT_BASE + 4) +#define MFGPT0_SETUP (MFGPT_BASE + 6) + +#endif /*!_CS5536_MFGPT_H */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h new file mode 100644 index 000000000000..0dca9c89ee7c --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h @@ -0,0 +1,153 @@ +/* + * the definition file of cs5536 Virtual Support Module(VSM). + * pci configuration space can be accessed through the VSM, so + * there is no need of the MSR read/write now, except the spec. + * MSR registers which are not implemented yet. + * + * Copyright (C) 2007 Lemote Inc. + * Author : jlliu, liujl@lemote.com + */ + +#ifndef _CS5536_PCI_H +#define _CS5536_PCI_H + +#include +#include + +extern void cs5536_pci_conf_write4(int function, int reg, u32 value); +extern u32 cs5536_pci_conf_read4(int function, int reg); + +#define CS5536_ACC_INTR 9 +#define CS5536_IDE_INTR 14 +#define CS5536_USB_INTR 11 +#define CS5536_MFGPT_INTR 5 +#define CS5536_UART1_INTR 4 +#define CS5536_UART2_INTR 3 + +/************** PCI BUS DEVICE FUNCTION ***************/ + +/* + * PCI bus device function + */ +#define PCI_BUS_CS5536 0 +#define PCI_IDSEL_CS5536 14 + +/********** STANDARD PCI-2.2 EXPANSION ****************/ + +/* + * PCI configuration space + * we have to virtualize the PCI configure space head, so we should + * define the necessary IDs and some others. + */ + +/* CONFIG of PCI VENDOR ID*/ +#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \ + (((mod_dev_id) << 16) | (sys_vendor_id)) + +/* VENDOR ID */ +#define CS5536_VENDOR_ID 0x1022 + +/* DEVICE ID */ +#define CS5536_ISA_DEVICE_ID 0x2090 +#define CS5536_IDE_DEVICE_ID 0x209a +#define CS5536_ACC_DEVICE_ID 0x2093 +#define CS5536_OHCI_DEVICE_ID 0x2094 +#define CS5536_EHCI_DEVICE_ID 0x2095 + +/* CLASS CODE : CLASS SUB-CLASS INTERFACE */ +#define CS5536_ISA_CLASS_CODE 0x060100 +#define CS5536_IDE_CLASS_CODE 0x010180 +#define CS5536_ACC_CLASS_CODE 0x040100 +#define CS5536_OHCI_CLASS_CODE 0x0C0310 +#define CS5536_EHCI_CLASS_CODE 0x0C0320 + +/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */ + +#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer) \ + ((PCI_NONE_BIST << 24) | ((header_type) << 16) \ + | ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE); + +#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */ +#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */ +#define PCI_NORMAL_HEADER_TYPE 0x00 +#define PCI_NORMAL_LATENCY_TIMER 0x00 +#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */ + +/* BAR */ +#define PCI_BAR0_REG 0x10 +#define PCI_BAR1_REG 0x14 +#define PCI_BAR2_REG 0x18 +#define PCI_BAR3_REG 0x1c +#define PCI_BAR4_REG 0x20 +#define PCI_BAR5_REG 0x24 +#define PCI_BAR_COUNT 6 +#define PCI_BAR_RANGE_MASK 0xFFFFFFFF + +/* CARDBUS CIS POINTER */ +#define PCI_CARDBUS_CIS_POINTER 0x00000000 + +/* SUBSYSTEM VENDOR ID */ +#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID + +/* SUBSYSTEM ID */ +#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID +#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID +#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID +#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID +#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID + +/* EXPANSION ROM BAR */ +#define PCI_EXPANSION_ROM_BAR 0x00000000 + +/* CAPABILITIES POINTER */ +#define PCI_CAPLIST_POINTER 0x00000000 +#define PCI_CAPLIST_USB_POINTER 0x40 +/* INTERRUPT */ + +#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \ + ((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \ + ((pin) << 8) | (mod_intr)) + +#define PCI_MAX_LATENCY 0x40 +#define PCI_MIN_GRANT 0x00 +#define PCI_DEFAULT_PIN 0x01 + +/*********** EXPANSION PCI REG ************************/ + +/* + * ISA EXPANSION + */ +#define PCI_UART1_INT_REG 0x50 +#define PCI_UART2_INT_REG 0x54 +#define PCI_ISA_FIXUP_REG 0x58 + +/* + * IDE EXPANSION + */ +#define PCI_IDE_CFG_REG 0x40 +#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF +#define PCI_IDE_DTC_REG 0x48 +#define PCI_IDE_CAST_REG 0x4C +#define PCI_IDE_ETC_REG 0x50 +#define PCI_IDE_PM_REG 0x54 +#define PCI_IDE_INT_REG 0x60 + +/* + * ACC EXPANSION + */ +#define PCI_ACC_INT_REG 0x50 + +/* + * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI + */ +#define PCI_OHCI_PM_REG 0x40 +#define PCI_OHCI_INT_REG 0x50 + +/* + * EHCI EXPANSION + */ +#define PCI_EHCI_LEGSMIEN_REG 0x50 +#define PCI_EHCI_LEGSMISTS_REG 0x54 +#define PCI_EHCI_FLADJ_REG 0x60 + +#endif /* _CS5536_PCI_H_ */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h new file mode 100644 index 000000000000..6305bea7e18e --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h @@ -0,0 +1,31 @@ +/* + * the read/write interfaces for Virtual Support Module(VSM) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin + */ + +#ifndef _CS5536_VSM_H +#define _CS5536_VSM_H + +#include + +typedef void (*cs5536_pci_vsm_write)(int reg, u32 value); +typedef u32 (*cs5536_pci_vsm_read)(int reg); + +#define DECLARE_CS5536_MODULE(name) \ +extern void pci_##name##_write_reg(int reg, u32 value); \ +extern u32 pci_##name##_read_reg(int reg); + +/* ide module */ +DECLARE_CS5536_MODULE(ide) +/* acc module */ +DECLARE_CS5536_MODULE(acc) +/* ohci module */ +DECLARE_CS5536_MODULE(ohci) +/* isa module */ +DECLARE_CS5536_MODULE(isa) +/* ehci module */ +DECLARE_CS5536_MODULE(ehci) + +#endif /* _CS5536_VSM_H */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/dma-coherence.h b/trunk/arch/mips/include/asm/mach-loongson/dma-coherence.h index 71a6851ba833..981c75f91a7d 100644 --- a/trunk/arch/mips/include/asm/mach-loongson/dma-coherence.h +++ b/trunk/arch/mips/include/asm/mach-loongson/dma-coherence.h @@ -28,7 +28,11 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, static inline unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) { +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT) + return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff); +#else return dma_addr & 0x7fffffff; +#endif } static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, diff --git a/trunk/arch/mips/include/asm/mach-loongson/loongson.h b/trunk/arch/mips/include/asm/mach-loongson/loongson.h index da70bcf2304e..ee8bc8376972 100644 --- a/trunk/arch/mips/include/asm/mach-loongson/loongson.h +++ b/trunk/arch/mips/include/asm/mach-loongson/loongson.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin * * This program is free software; you can redistribute it and/or modify it @@ -15,9 +15,6 @@ #include #include -/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */ -#include - /* loongson internal northbridge initialization */ extern void bonito_irq_init(void); @@ -32,7 +29,19 @@ extern unsigned long memsize, highmemsize; /* loongson-specific command line, env and memory initialization */ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); +extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); +#ifdef CONFIG_LOONGSON_UART_BASE +extern unsigned long _loongson_uart_base, loongson_uart_base; +extern void prom_init_loongson_uart_base(void); +#endif + +static inline void prom_init_uart_base(void) +{ +#ifdef CONFIG_LOONGSON_UART_BASE + prom_init_loongson_uart_base(); +#endif +} /* irq operation functions */ extern void bonito_irqdispatch(void); @@ -40,25 +49,276 @@ extern void __init bonito_irq_init(void); extern void __init set_irq_trigger_mode(void); extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); +extern int mach_i8259_irq(void); + +/* We need this in some places... */ +#define delay() ({ \ + int x; \ + for (x = 0; x < 100000; x++) \ + __asm__ __volatile__(""); \ +}) + +#define LOONGSON_REG(x) \ + (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x))) + +#define LOONGSON_IRQ_BASE 32 +#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ + +#define LOONGSON_FLASH_BASE 0x1c000000 +#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ +#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) + +#define LOONGSON_LIO0_BASE 0x1e000000 +#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */ +#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1) + +#define LOONGSON_BOOT_BASE 0x1fc00000 +#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */ +#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1) +#define LOONGSON_REG_BASE 0x1fe00000 +#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */ +#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1) + +#define LOONGSON_LIO1_BASE 0x1ff00000 +#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */ +#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1) + +#define LOONGSON_PCILO0_BASE 0x10000000 +#define LOONGSON_PCILO1_BASE 0x14000000 +#define LOONGSON_PCILO2_BASE 0x18000000 +#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE +#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */ +#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1) + +#define LOONGSON_PCICFG_BASE 0x1fe80000 +#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ +#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) +#define LOONGSON_PCIIO_BASE 0x1fd00000 +#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ +#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) + +/* Loongson Register Bases */ + +#define LOONGSON_PCICONFIGBASE 0x00 +#define LOONGSON_REGBASE 0x100 /* PCI Configuration Registers */ -#define LOONGSON_PCI_ISR4C BONITO_PCI_REG(0x4c) + +#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x)) +#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00) +#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04) +#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08) +#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c) +#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10) +#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14) +#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18) +#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c) +#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20) +#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30) +#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c) + +#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c) + +#define LOONGSON_PCICMD_PERR_CLR 0x80000000 +#define LOONGSON_PCICMD_SERR_CLR 0x40000000 +#define LOONGSON_PCICMD_MABORT_CLR 0x20000000 +#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000 +#define LOONGSON_PCICMD_TABORT_CLR 0x08000000 +#define LOONGSON_PCICMD_MPERR_CLR 0x01000000 +#define LOONGSON_PCICMD_PERRRESPEN 0x00000040 +#define LOONGSON_PCICMD_ASTEPEN 0x00000080 +#define LOONGSON_PCICMD_SERREN 0x00000100 +#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00 +#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8 + +/* Loongson h/w Configuration */ + +#define LOONGSON_GENCFG_OFFSET 0x4 +#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET) + +#define LOONGSON_GENCFG_DEBUGMODE 0x00000001 +#define LOONGSON_GENCFG_SNOOPEN 0x00000002 +#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004 + +#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008 +#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010 +#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020 +#define LOONGSON_GENCFG_BYTESWAP 0x00000040 + +#define LOONGSON_GENCFG_UNCACHED 0x00000080 +#define LOONGSON_GENCFG_PREFETCHEN 0x00000100 +#define LOONGSON_GENCFG_WBEHINDEN 0x00000200 +#define LOONGSON_GENCFG_CACHEALG 0x00000c00 +#define LOONGSON_GENCFG_CACHEALG_SHIFT 10 +#define LOONGSON_GENCFG_PCIQUEUE 0x00001000 +#define LOONGSON_GENCFG_CACHESTOP 0x00002000 +#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000 +#define LOONGSON_GENCFG_BUSERREN 0x00008000 +#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000 +#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000 + +/* PCI address map control */ + +#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10) +#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14) +#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18) + +/* GPIO Regs - r/w */ + +#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c) +#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20) + +/* ICU Configuration Regs - r/w */ + +#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24) +#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28) +#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c) + +/* ICU Enable Regs - IntEn & IntISR are r/o. */ + +#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30) +#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34) +#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38) +#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c) + +/* ICU */ +#define LOONGSON_ICU_MBOXES 0x0000000f +#define LOONGSON_ICU_MBOXES_SHIFT 0 +#define LOONGSON_ICU_DMARDY 0x00000010 +#define LOONGSON_ICU_DMAEMPTY 0x00000020 +#define LOONGSON_ICU_COPYRDY 0x00000040 +#define LOONGSON_ICU_COPYEMPTY 0x00000080 +#define LOONGSON_ICU_COPYERR 0x00000100 +#define LOONGSON_ICU_PCIIRQ 0x00000200 +#define LOONGSON_ICU_MASTERERR 0x00000400 +#define LOONGSON_ICU_SYSTEMERR 0x00000800 +#define LOONGSON_ICU_DRAMPERR 0x00001000 +#define LOONGSON_ICU_RETRYERR 0x00002000 +#define LOONGSON_ICU_GPIOS 0x01ff0000 +#define LOONGSON_ICU_GPIOS_SHIFT 16 +#define LOONGSON_ICU_GPINS 0x7e000000 +#define LOONGSON_ICU_GPINS_SHIFT 25 +#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N))) +#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N))) +#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N))) + +/* PCI prefetch window base & mask */ + +#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40) +#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44) +#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48) +#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c) /* PCI_Hit*_Sel_* */ -#define LOONGSON_PCI_HIT0_SEL_L BONITO(BONITO_REGBASE + 0x50) -#define LOONGSON_PCI_HIT0_SEL_H BONITO(BONITO_REGBASE + 0x54) -#define LOONGSON_PCI_HIT1_SEL_L BONITO(BONITO_REGBASE + 0x58) -#define LOONGSON_PCI_HIT1_SEL_H BONITO(BONITO_REGBASE + 0x5c) -#define LOONGSON_PCI_HIT2_SEL_L BONITO(BONITO_REGBASE + 0x60) -#define LOONGSON_PCI_HIT2_SEL_H BONITO(BONITO_REGBASE + 0x64) +#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50) +#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54) +#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58) +#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c) +#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60) +#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64) /* PXArb Config & Status */ -#define LOONGSON_PXARB_CFG BONITO(BONITO_REGBASE + 0x68) -#define LOONGSON_PXARB_STATUS BONITO(BONITO_REGBASE + 0x6c) +#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68) +#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c) + +/* pcimap */ + +#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f +#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0 +#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0 +#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6 +#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000 +#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12 +#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000 +#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ + ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) + +#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ +#include +extern void loongson2_cpu_wait(void); +extern struct cpufreq_frequency_table loongson2_clockmod_table[]; + +/* Chip Config */ +#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) +#endif + +/* + * address windows configuration module + * + * loongson2e do not have this module + */ +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* address window config module base address */ +#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul +#define LOONGSON_ADDRWINCFG_SIZE 0x180 + +extern unsigned long _loongson_addrwincfg_base; +#define LOONGSON_ADDRWINCFG(offset) \ + (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) + +#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) +#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) +#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) +#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) + +#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) +#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) +#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) +#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) + +#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) +#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) +#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) +#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) + +#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) +#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) +#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) +#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) + +#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) +#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) +#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) +#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) + +#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) +#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) +#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) +#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) + +#define ADDRWIN_WIN0 0 +#define ADDRWIN_WIN1 1 +#define ADDRWIN_WIN2 2 +#define ADDRWIN_WIN3 3 + +#define ADDRWIN_MAP_DST_DDR 0 +#define ADDRWIN_MAP_DST_PCI 1 +#define ADDRWIN_MAP_DST_LIO 1 + +/* + * s: CPU, PCIDMA + * d: DDR, PCI, LIO + * win: 0, 1, 2, 3 + * src: map source + * dst: map destination + * size: ~mask + 1 + */ +#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ + s##_WIN##w##_BASE = (src); \ + s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MASK = ~(size-1); \ +} while (0) + +#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) +#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) +#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) -/* loongson2-specific perf counter IRQ */ -#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) +#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/machine.h b/trunk/arch/mips/include/asm/mach-loongson/machine.h index 206ea2067916..acf8359cb135 100644 --- a/trunk/arch/mips/include/asm/mach-loongson/machine.h +++ b/trunk/arch/mips/include/asm/mach-loongson/machine.h @@ -13,10 +13,15 @@ #ifdef CONFIG_LEMOTE_FULOONG2E -#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8) - #define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E #endif +/* use fuloong2f as the default machine of LEMOTE_MACH2F */ +#ifdef CONFIG_LEMOTE_MACH2F + +#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F + +#endif + #endif /* __ASM_MACH_LOONGSON_MACHINE_H */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/mem.h b/trunk/arch/mips/include/asm/mach-loongson/mem.h index bd7b3cba7e35..e9960f341b96 100644 --- a/trunk/arch/mips/include/asm/mach-loongson/mem.h +++ b/trunk/arch/mips/include/asm/mach-loongson/mem.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin * * This program is free software; you can redistribute it and/or modify it @@ -12,19 +12,30 @@ #define __ASM_MACH_LOONGSON_MEM_H /* - * On Lemote Loongson 2e + * high memory space * - * the high memory space starts from 512M. - * the peripheral registers reside between 0x1000:0000 and 0x2000:0000. + * in loongson2e, starts from 512M + * in loongson2f, starts from 2G 256M */ +#ifdef CONFIG_CPU_LOONGSON2E +#define LOONGSON_HIGHMEM_START 0x20000000 +#else +#define LOONGSON_HIGHMEM_START 0x90000000 +#endif -#ifdef CONFIG_LEMOTE_FULOONG2E - -#define LOONGSON_HIGHMEM_START 0x20000000 +/* + * the peripheral registers(MMIO): + * + * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000. + * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000. + */ #define LOONGSON_MMIO_MEM_START 0x10000000 -#define LOONGSON_MMIO_MEM_END 0x20000000 +#ifdef CONFIG_CPU_LOONGSON2E +#define LOONGSON_MMIO_MEM_END 0x20000000 +#else +#define LOONGSON_MMIO_MEM_END 0x80000000 #endif #endif /* __ASM_MACH_LOONGSON_MEM_H */ diff --git a/trunk/arch/mips/include/asm/mach-loongson/pci.h b/trunk/arch/mips/include/asm/mach-loongson/pci.h index f1663ca81da0..a199a4f6de4e 100644 --- a/trunk/arch/mips/include/asm/mach-loongson/pci.h +++ b/trunk/arch/mips/include/asm/mach-loongson/pci.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2008 Zhang Le + * Copyright (c) 2009 Wu Zhangjin * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General @@ -22,16 +23,39 @@ #ifndef __ASM_MACH_LOONGSON_PCI_H_ #define __ASM_MACH_LOONGSON_PCI_H_ -extern struct pci_ops bonito64_pci_ops; +extern struct pci_ops loongson_pci_ops; -#ifdef CONFIG_LEMOTE_FULOONG2E +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* + * we use address window2 to map cpu address space to pci space + * window2: cpu [1G, 2G] -> pci [1G, 2G] + * why not use window 0 & 1? because they are used by cpu when booting. + * window0: cpu [0, 256M] -> ddr [0, 256M] + * window1: cpu [256M, 512M] -> pci [256M, 512M] + */ + +/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ +#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ +#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC + +#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST +#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ + +#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ + LOONGSON_PCI_MEM_START + 1) + +#else /* loongson2f/32bit & loongson2e */ /* this pci memory space is mapped by pcimap in pci.c */ -#define LOONGSON_PCI_MEM_START BONITO_PCILO1_BASE -#define LOONGSON_PCI_MEM_END (BONITO_PCILO1_BASE + 0x04000000 * 2) +#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE +#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#endif +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */ diff --git a/trunk/arch/mips/include/asm/mach-powertv/asic.h b/trunk/arch/mips/include/asm/mach-powertv/asic.h new file mode 100644 index 000000000000..bcad43a93ebf --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-powertv/asic.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_ASIC_H +#define _ASM_MACH_POWERTV_ASIC_H + +#include +#include + +#define DVR_CAPABLE (1<<0) +#define PCIE_CAPABLE (1<<1) +#define FFS_CAPABLE (1<<2) +#define DISPLAY_CAPABLE (1<<3) + +/* Platform Family types + * For compitability, the new value must be added in the end */ +enum family_type { + FAMILY_8500, + FAMILY_8500RNG, + FAMILY_4500, + FAMILY_1500, + FAMILY_8600, + FAMILY_4600, + FAMILY_4600VZA, + FAMILY_8600VZB, + FAMILY_1500VZE, + FAMILY_1500VZF, + FAMILIES +}; + +/* Register maps for each ASIC */ +extern const struct register_map calliope_register_map; +extern const struct register_map cronus_register_map; +extern const struct register_map zeus_register_map; + +extern struct resource dvr_cronus_resources[]; +extern struct resource dvr_zeus_resources[]; +extern struct resource non_dvr_calliope_resources[]; +extern struct resource non_dvr_cronus_resources[]; +extern struct resource non_dvr_cronuslite_resources[]; +extern struct resource non_dvr_vz_calliope_resources[]; +extern struct resource non_dvr_vze_calliope_resources[]; +extern struct resource non_dvr_vzf_calliope_resources[]; +extern struct resource non_dvr_zeus_resources[]; + +extern void powertv_platform_init(void); +extern void platform_alloc_bootmem(void); +extern enum asic_type platform_get_asic(void); +extern enum family_type platform_get_family(void); +extern int platform_supports_dvr(void); +extern int platform_supports_ffs(void); +extern int platform_supports_pcie(void); +extern int platform_supports_display(void); +extern void configure_platform(void); +extern void platform_configure_usb_ehci(void); +extern void platform_unconfigure_usb_ehci(void); +extern void platform_configure_usb_ohci(void); +extern void platform_unconfigure_usb_ohci(void); + +/* Platform Resources */ +#define ASIC_RESOURCE_GET_EXISTS 1 +extern struct resource *asic_resource_get(const char *name); +extern void platform_release_memory(void *baddr, int size); + +/* Reboot Cause */ +extern void set_reboot_cause(char code, unsigned int data, unsigned int data2); +extern void set_locked_reboot_cause(char code, unsigned int data, + unsigned int data2); + +enum sys_reboot_type { + sys_unknown_reboot = 0x00, /* Unknown reboot cause */ + sys_davic_change = 0x01, /* Reboot due to change in DAVIC + * mode */ + sys_user_reboot = 0x02, /* Reboot initiated by user */ + sys_system_reboot = 0x03, /* Reboot initiated by OS */ + sys_trap_reboot = 0x04, /* Reboot due to a CPU trap */ + sys_silent_reboot = 0x05, /* Silent reboot */ + sys_boot_ldr_reboot = 0x06, /* Bootloader reboot */ + sys_power_up_reboot = 0x07, /* Power on bootup. Older + * drivers may report as + * userReboot. */ + sys_code_change = 0x08, /* Reboot to take code change. + * Older drivers may report as + * userReboot. */ + sys_hardware_reset = 0x09, /* HW watchdog or front-panel + * reset button reset. Older + * drivers may report as + * userReboot. */ + sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */ +}; + +#endif /* _ASM_MACH_POWERTV_ASIC_H */ diff --git a/trunk/arch/mips/include/asm/mach-powertv/asic_regs.h b/trunk/arch/mips/include/asm/mach-powertv/asic_regs.h new file mode 100644 index 000000000000..9a65c93782f9 --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-powertv/asic_regs.h @@ -0,0 +1,155 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __ASM_MACH_POWERTV_ASIC_H_ +#define __ASM_MACH_POWERTV_ASIC_H_ +#include + +/* ASIC types */ +enum asic_type { + ASIC_UNKNOWN, + ASIC_ZEUS, + ASIC_CALLIOPE, + ASIC_CRONUS, + ASIC_CRONUSLITE, + ASICS +}; + +/* hardcoded values read from Chip Version registers */ +#define CRONUS_10 0x0B4C1C20 +#define CRONUS_11 0x0B4C1C21 +#define CRONUSLITE_10 0x0B4C1C40 + +#define NAND_FLASH_BASE 0x03000000 +#define ZEUS_IO_BASE 0x09000000 +#define CALLIOPE_IO_BASE 0x08000000 +#define CRONUS_IO_BASE 0x09000000 +#define ASIC_IO_SIZE 0x01000000 + +/* Definitions for backward compatibility */ +#define UART1_INTSTAT uart1_intstat +#define UART1_INTEN uart1_inten +#define UART1_CONFIG1 uart1_config1 +#define UART1_CONFIG2 uart1_config2 +#define UART1_DIVISORHI uart1_divisorhi +#define UART1_DIVISORLO uart1_divisorlo +#define UART1_DATA uart1_data +#define UART1_STATUS uart1_status + +/* ASIC register enumeration */ +struct register_map { + u32 eic_slow0_strt_add; + u32 eic_cfg_bits; + u32 eic_ready_status; + + u32 chipver3; + u32 chipver2; + u32 chipver1; + u32 chipver0; + + u32 uart1_intstat; + u32 uart1_inten; + u32 uart1_config1; + u32 uart1_config2; + u32 uart1_divisorhi; + u32 uart1_divisorlo; + u32 uart1_data; + u32 uart1_status; + + u32 int_stat_3; + u32 int_stat_2; + u32 int_stat_1; + u32 int_stat_0; + u32 int_config; + u32 int_int_scan; + u32 ien_int_3; + u32 ien_int_2; + u32 ien_int_1; + u32 ien_int_0; + u32 int_level_3_3; + u32 int_level_3_2; + u32 int_level_3_1; + u32 int_level_3_0; + u32 int_level_2_3; + u32 int_level_2_2; + u32 int_level_2_1; + u32 int_level_2_0; + u32 int_level_1_3; + u32 int_level_1_2; + u32 int_level_1_1; + u32 int_level_1_0; + u32 int_level_0_3; + u32 int_level_0_2; + u32 int_level_0_1; + u32 int_level_0_0; + u32 int_docsis_en; + + u32 mips_pll_setup; + u32 usb_fs; + u32 test_bus; + u32 crt_spare; + u32 usb2_ohci_int_mask; + u32 usb2_strap; + u32 ehci_hcapbase; + u32 ohci_hc_revision; + u32 bcm1_bs_lmi_steer; + u32 usb2_control; + u32 usb2_stbus_obc; + u32 usb2_stbus_mess_size; + u32 usb2_stbus_chunk_size; + + u32 pcie_regs; + u32 tim_ch; + u32 tim_cl; + u32 gpio_dout; + u32 gpio_din; + u32 gpio_dir; + u32 watchdog; + u32 front_panel; + + u32 register_maps; +}; + +extern enum asic_type asic; +extern const struct register_map *register_map; +extern unsigned long asic_phy_base; /* Physical address of ASIC */ +extern unsigned long asic_base; /* Virtual address of ASIC */ + +/* + * Macros to interface to registers through their ioremapped address + * asic_reg_offset Returns the offset of a given register from the start + * of the ASIC address space + * asic_reg_phys_addr Returns the physical address of the given register + * asic_reg_addr Returns the iomapped virtual address of the given + * register. + */ +#define asic_reg_offset(x) (register_map->x) +#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x)) +#define asic_reg_addr(x) \ + ((unsigned int *) (asic_base + asic_reg_offset(x))) + +/* + * The asic_reg macro is gone. It should be replaced by either asic_read or + * asic_write, as appropriate. + */ + +#define asic_read(x) readl(asic_reg_addr(x)) +#define asic_write(v, x) writel(v, asic_reg_addr(x)) + +extern void asic_irq_init(void); +#endif diff --git a/trunk/arch/mips/include/asm/mach-powertv/dma-coherence.h b/trunk/arch/mips/include/asm/mach-powertv/dma-coherence.h new file mode 100644 index 000000000000..5b8d5ebeb838 --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -0,0 +1,119 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Version from mach-generic modified to support PowerTV port + * Portions Copyright (C) 2009 Cisco Systems, Inc. + * Copyright (C) 2006 Ralf Baechle + * + */ + +#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H +#define __ASM_MACH_POWERTV_DMA_COHERENCE_H + +#include +#include +#include +#include + +static inline bool is_kseg2(void *addr) +{ + return (unsigned long)addr >= KSEG2; +} + +static inline unsigned long virt_to_phys_from_pte(void *addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ptep, pte; + + unsigned long virt_addr = (unsigned long)addr; + unsigned long phys_addr = 0UL; + + /* get the page global directory. */ + pgd = pgd_offset_k(virt_addr); + + if (!pgd_none(*pgd)) { + /* get the page upper directory */ + pud = pud_offset(pgd, virt_addr); + if (!pud_none(*pud)) { + /* get the page middle directory */ + pmd = pmd_offset(pud, virt_addr); + if (!pmd_none(*pmd)) { + /* get a pointer to the page table entry */ + ptep = pte_offset(pmd, virt_addr); + pte = *ptep; + /* check for a valid page */ + if (pte_present(pte)) { + /* get the physical address the page is + * refering to */ + phys_addr = (unsigned long) + page_to_phys(pte_page(pte)); + /* add the offset within the page */ + phys_addr |= (virt_addr & ~PAGE_MASK); + } + } + } + } + + return phys_addr; +} + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + if (is_kseg2(addr)) + return phys_to_bus(virt_to_phys_from_pte(addr)); + else + return phys_to_bus(virt_to_phys(addr)); +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return phys_to_bus(page_to_phys(page)); +} + +static inline unsigned long plat_dma_addr_to_phys(struct device *dev, + dma_addr_t dma_addr) +{ + return bus_to_phys(dma_addr); +} + +static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static inline int plat_dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < DMA_BIT_MASK(24)) + return 0; + + return 1; +} + +static inline void plat_extra_sync_for_device(struct device *dev) +{ + return; +} + +static inline int plat_dma_mapping_error(struct device *dev, + dma_addr_t dma_addr) +{ + return 0; +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */ diff --git a/trunk/arch/mips/include/asm/mach-powertv/interrupts.h b/trunk/arch/mips/include/asm/mach-powertv/interrupts.h new file mode 100644 index 000000000000..629a57413657 --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-powertv/interrupts.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_ +#define _ASM_MACH_POWERTV_INTERRUPTS_H_ + +/* + * Defines for all of the interrupt lines + */ + +/* Definitions for backward compatibility */ +#define kIrq_Uart1 irq_uart1 + +#define ibase 0 + +/*------------- Register: int_stat_3 */ +/* 126 unused (bit 31) */ +#define irq_asc2video (ibase+126) /* ASC 2 Video Interrupt */ +#define irq_asc1video (ibase+125) /* ASC 1 Video Interrupt */ +#define irq_comms_block_wd (ibase+124) /* ASC 1 Video Interrupt */ +#define irq_fdma_mailbox (ibase+123) /* FDMA Mailbox Output */ +#define irq_fdma_gp (ibase+122) /* FDMA GP Output */ +#define irq_mips_pic (ibase+121) /* MIPS Performance Counter + * Interrupt */ +#define irq_mips_timer (ibase+120) /* MIPS Timer Interrupt */ +#define irq_memory_protect (ibase+119) /* Memory Protection Interrupt + * -- Ored by glue logic inside + * SPARC ILC (see + * INT_MEM_PROT_STAT, below, + * for individual interrupts) + */ +/* 118 unused (bit 22) */ +#define irq_sbag (ibase+117) /* SBAG Interrupt -- Ored by + * glue logic inside SPARC ILC + * (see INT_SBAG_STAT, below, + * for individual interrupts) */ +#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */ +#define irq_qam_a_fec (ibase+115) /* QAM A FEC Interrupt */ +/* 114 unused (bit 18) */ +#define irq_mailbox (ibase+113) /* Mailbox Debug Interrupt -- + * Ored by glue logic inside + * SPARC ILC (see + * INT_MAILBOX_STAT, below, for + * individual interrupts) */ +#define irq_fuse_stat1 (ibase+112) /* Fuse Status 1 */ +#define irq_fuse_stat2 (ibase+111) /* Fuse Status 2 */ +#define irq_fuse_stat3 (ibase+110) /* Blitter Interrupt / Fuse + * Status 3 */ +#define irq_blitter (ibase+110) /* Blitter Interrupt / Fuse + * Status 3 */ +#define irq_avc1_pp0 (ibase+109) /* AVC Decoder #1 PP0 + * Interrupt */ +#define irq_avc1_pp1 (ibase+108) /* AVC Decoder #1 PP1 + * Interrupt */ +#define irq_avc1_mbe (ibase+107) /* AVC Decoder #1 MBE + * Interrupt */ +#define irq_avc2_pp0 (ibase+106) /* AVC Decoder #2 PP0 + * Interrupt */ +#define irq_avc2_pp1 (ibase+105) /* AVC Decoder #2 PP1 + * Interrupt */ +#define irq_avc2_mbe (ibase+104) /* AVC Decoder #2 MBE + * Interrupt */ +#define irq_zbug_spi (ibase+103) /* Zbug SPI Slave Interrupt */ +#define irq_qam_mod2 (ibase+102) /* QAM Modulator 2 DMA + * Interrupt */ +#define irq_ir_rx (ibase+101) /* IR RX 2 Interrupt */ +#define irq_aud_dsp2 (ibase+100) /* Audio DSP #2 Interrupt */ +#define irq_aud_dsp1 (ibase+99) /* Audio DSP #1 Interrupt */ +#define irq_docsis (ibase+98) /* DOCSIS Debug Interrupt */ +#define irq_sd_dvp1 (ibase+97) /* SD DVP #1 Interrupt */ +#define irq_sd_dvp2 (ibase+96) /* SD DVP #2 Interrupt */ +/*------------- Register: int_stat_2 */ +#define irq_hd_dvp (ibase+95) /* HD DVP Interrupt */ +#define kIrq_Prewatchdog (ibase+94) /* watchdog Pre-Interrupt */ +#define irq_timer2 (ibase+93) /* Programmable Timer + * Interrupt 2 */ +#define irq_1394 (ibase+92) /* 1394 Firewire Interrupt */ +#define irq_usbohci (ibase+91) /* USB 2.0 OHCI Interrupt */ +#define irq_usbehci (ibase+90) /* USB 2.0 EHCI Interrupt */ +#define irq_pciexp (ibase+89) /* PCI Express 0 Interrupt */ +#define irq_pciexp0 (ibase+89) /* PCI Express 0 Interrupt */ +#define irq_afe1 (ibase+88) /* AFE 1 Interrupt */ +#define irq_sata (ibase+87) /* SATA 1 Interrupt */ +#define irq_sata1 (ibase+87) /* SATA 1 Interrupt */ +#define irq_dtcp (ibase+86) /* DTCP Interrupt */ +#define irq_pciexp1 (ibase+85) /* PCI Express 1 Interrupt */ +/* 84 unused (bit 20) */ +/* 83 unused (bit 19) */ +/* 82 unused (bit 18) */ +#define irq_sata2 (ibase+81) /* SATA2 Interrupt */ +#define irq_uart2 (ibase+80) /* UART2 Interrupt */ +#define irq_legacy_usb (ibase+79) /* Legacy USB Host ISR (1.1 + * Host module) */ +#define irq_pod (ibase+78) /* POD Interrupt */ +#define irq_slave_usb (ibase+77) /* Slave USB */ +#define irq_denc1 (ibase+76) /* DENC #1 VTG Interrupt */ +#define irq_vbi_vtg (ibase+75) /* VBI VTG Interrupt */ +#define irq_afe2 (ibase+74) /* AFE 2 Interrupt */ +#define irq_denc2 (ibase+73) /* DENC #2 VTG Interrupt */ +#define irq_asc2 (ibase+72) /* ASC #2 Interrupt */ +#define irq_asc1 (ibase+71) /* ASC #1 Interrupt */ +#define irq_mod_dma (ibase+70) /* Modulator DMA Interrupt */ +#define irq_byte_eng1 (ibase+69) /* Byte Engine Interrupt [1] */ +#define irq_byte_eng0 (ibase+68) /* Byte Engine Interrupt [0] */ +/* 67 unused (bit 03) */ +/* 66 unused (bit 02) */ +/* 65 unused (bit 01) */ +/* 64 unused (bit 00) */ +/*------------- Register: int_stat_1 */ +/* 63 unused (bit 31) */ +/* 62 unused (bit 30) */ +/* 61 unused (bit 29) */ +/* 60 unused (bit 28) */ +/* 59 unused (bit 27) */ +/* 58 unused (bit 26) */ +/* 57 unused (bit 25) */ +/* 56 unused (bit 24) */ +#define irq_buf_dma_mem2mem (ibase+55) /* BufDMA Memory to Memory + * Interrupt */ +#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit + * Interrupt */ +#define irq_buf_dma_qpskpodtransmit (ibase+53) /* BufDMA QPSK/POD Tramsit + * Interrupt */ +#define irq_buf_dma_transmit_error (ibase+52) /* BufDMA Transmit Error + * Interrupt */ +#define irq_buf_dma_usbrecv (ibase+51) /* BufDMA USB Receive + * Interrupt */ +#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive + * Interrupt */ +#define irq_buf_dma_recv_error (ibase+49) /* BufDMA Receive Error + * Interrupt */ +#define irq_qamdma_transmit_play (ibase+48) /* QAMDMA Transmit/Play + * Interrupt */ +#define irq_qamdma_transmit_error (ibase+47) /* QAMDMA Transmit Error + * Interrupt */ +#define irq_qamdma_recv2high (ibase+46) /* QAMDMA Receive 2 High + * (Chans 63-32) */ +#define irq_qamdma_recv2low (ibase+45) /* QAMDMA Receive 2 Low + * (Chans 31-0) */ +#define irq_qamdma_recv1high (ibase+44) /* QAMDMA Receive 1 High + * (Chans 63-32) */ +#define irq_qamdma_recv1low (ibase+43) /* QAMDMA Receive 1 Low + * (Chans 31-0) */ +#define irq_qamdma_recv_error (ibase+42) /* QAMDMA Receive Error + * Interrupt */ +#define irq_mpegsplice (ibase+41) /* MPEG Splice Interrupt */ +#define irq_deinterlace_rdy (ibase+40) /* Deinterlacer Frame Ready + * Interrupt */ +#define irq_ext_in0 (ibase+39) /* External Interrupt irq_in0 */ +#define irq_gpio3 (ibase+38) /* GP I/O IRQ 3 - From GP I/O + * Module */ +#define irq_gpio2 (ibase+37) /* GP I/O IRQ 2 - From GP I/O + * Module (ABE_intN) */ +#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or + * Discontinuity 1 */ +#define irq_pcrcmplt2 (ibase+35) /* PCR Capture Complete or + * Discontinuity 2 */ +#define irq_parse_peierr (ibase+34) /* PID Parser Error Detect + * (PEI) */ +#define irq_parse_cont_err (ibase+33) /* PID Parser continuity error + * detect */ +#define irq_ds1framer (ibase+32) /* DS1 Framer Interrupt */ +/*------------- Register: int_stat_0 */ +#define irq_gpio1 (ibase+31) /* GP I/O IRQ 1 - From GP I/O + * Module */ +#define irq_gpio0 (ibase+30) /* GP I/O IRQ 0 - From GP I/O + * Module */ +#define irq_qpsk_out_aloha (ibase+29) /* QPSK Output Slotted Aloha + * (chan 3) Transmission + * Completed OK */ +#define irq_qpsk_out_tdma (ibase+28) /* QPSK Output TDMA (chan 2) + * Transmission Completed OK */ +#define irq_qpsk_out_reserve (ibase+27) /* QPSK Output Reservation + * (chan 1) Transmission + * Completed OK */ +#define irq_qpsk_out_aloha_err (ibase+26) /* QPSK Output Slotted Aloha + * (chan 3)Transmission + * completed with Errors. */ +#define irq_qpsk_out_tdma_err (ibase+25) /* QPSK Output TDMA (chan 2) + * Transmission completed with + * Errors. */ +#define irq_qpsk_out_rsrv_err (ibase+24) /* QPSK Output Reservation + * (chan 1) Transmission + * completed with Errors */ +#define irq_aloha_fail (ibase+23) /* Unsuccessful Resend of Aloha + * for N times. Aloha retry + * timeout for channel 3. */ +#define irq_timer1 (ibase+22) /* Programmable Timer + * Interrupt */ +#define irq_keyboard (ibase+21) /* Keyboard Module Interrupt */ +#define irq_i2c (ibase+20) /* I2C Module Interrupt */ +#define irq_spi (ibase+19) /* SPI Module Interrupt */ +#define irq_irblaster (ibase+18) /* IR Blaster Interrupt */ +#define irq_splice_detect (ibase+17) /* PID Key Change Interrupt or + * Splice Detect Interrupt */ +#define irq_se_micro (ibase+16) /* Secure Micro I/F Module + * Interrupt */ +#define irq_uart1 (ibase+15) /* UART Interrupt */ +#define irq_irrecv (ibase+14) /* IR Receiver Interrupt */ +#define irq_host_int1 (ibase+13) /* Host-to-Host Interrupt 1 */ +#define irq_host_int0 (ibase+12) /* Host-to-Host Interrupt 0 */ +#define irq_qpsk_hecerr (ibase+11) /* QPSK HEC Error Interrupt */ +#define irq_qpsk_crcerr (ibase+10) /* QPSK AAL-5 CRC Error + * Interrupt */ +/* 9 unused (bit 09) */ +/* 8 unused (bit 08) */ +#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error + * Interrupt */ +#define irq_psilength_err (ibase+6) /* QAM PSI Length Error + * Interrupt */ +#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From + * Forward Path Reference - + * every 3ms when forward Mbits + * and forward slot control + * bytes are updated. */ +#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from + * Reverse Path Reference - + * delayed from forward mark by + * the ranging delay plus a + * fixed amount. When reverse + * Mbits and reverse slot + * control bytes are updated. + * Occurs every 3ms for 3.0M and + * 1.554 M upstream rates and + * every 6 ms for 256K upstream + * rate. */ +#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on + * Channel 1. */ +#define irq_reservation (ibase+2) /* Partial (or Incremental) + * Reservation Message Completed + * or Slotted aloha verify for + * channel 1. */ +#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify + * Interrupt or Reservation + * increment completed for + * channel 3. */ +#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */ +#endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */ + diff --git a/trunk/arch/mips/include/asm/mach-powertv/ioremap.h b/trunk/arch/mips/include/asm/mach-powertv/ioremap.h new file mode 100644 index 000000000000..e6276d5146e8 --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-powertv/ioremap.h @@ -0,0 +1,90 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Portions Copyright (C) Cisco Systems, Inc. + */ +#ifndef __ASM_MACH_POWERTV_IOREMAP_H +#define __ASM_MACH_POWERTV_IOREMAP_H + +#include + +#define LOW_MEM_BOUNDARY_PHYS 0x20000000 +#define LOW_MEM_BOUNDARY_MASK (~(LOW_MEM_BOUNDARY_PHYS - 1)) + +/* + * The bus addresses are different than the physical addresses that + * the processor sees by an offset. This offset varies by ASIC + * version. Define a variable to hold the offset and some macros to + * make the conversion simpler. */ +extern unsigned long phys_to_bus_offset; + +#ifdef CONFIG_HIGHMEM +#define MEM_GAP_PHYS 0x60000000 +/* + * TODO: We will use the hard code for conversion between physical and + * bus until the bootloader releases their device tree to us. + */ +#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \ + ((x) + phys_to_bus_offset) : (x)) +#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \ + ((x) - phys_to_bus_offset) : (x)) +#else +#define phys_to_bus(x) ((x) + phys_to_bus_offset) +#define bus_to_phys(x) ((x) - phys_to_bus_offset) +#endif + +/* + * Determine whether the address we are given is for an ASIC device + * Params: addr Address to check + * Returns: Zero if the address is not for ASIC devices, non-zero + * if it is. + */ +static inline int asic_is_device_addr(phys_t addr) +{ + return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK); +} + +/* + * Determine whether the address we are given is external RAM mappable + * into KSEG1. + * Params: addr Address to check + * Returns: Zero if the address is not for external RAM and + */ +static inline int asic_is_lowmem_ram_addr(phys_t addr) +{ + /* + * The RAM always starts at the following address in the processor's + * physical address space + */ + static const phys_t phys_ram_base = 0x10000000; + phys_t bus_ram_base; + + bus_ram_base = phys_to_bus_offset + phys_ram_base; + + return addr >= bus_ram_base && + addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base)); +} + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} +#endif /* __ASM_MACH_POWERTV_IOREMAP_H */ diff --git a/trunk/arch/mips/include/asm/mach-powertv/irq.h b/trunk/arch/mips/include/asm/mach-powertv/irq.h new file mode 100644 index 000000000000..4bd5d0c61a91 --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-powertv/irq.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_POWERTV_IRQ_H +#define _ASM_MACH_POWERTV_IRQ_H +#include + +#define MIPS_CPU_IRQ_BASE ibase +#define NR_IRQS 127 +#endif diff --git a/trunk/arch/mips/include/asm/mach-powertv/powertv-clock.h b/trunk/arch/mips/include/asm/mach-powertv/powertv-clock.h new file mode 100644 index 000000000000..6f3e9a0fcf8c --- /dev/null +++ b/trunk/arch/mips/include/asm/mach-powertv/powertv-clock.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/* + * Local definitions for the powertv PCI code + */ + +#ifndef _POWERTV_PCI_POWERTV_PCI_H_ +#define _POWERTV_PCI_POWERTV_PCI_H_ +extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +extern int asic_pcie_init(void); +extern int asic_pcie_init(void); + +extern int log_level; +#endif diff --git a/trunk/arch/mips/include/asm/mach-excite/war.h b/trunk/arch/mips/include/asm/mach-powertv/war.h similarity index 56% rename from trunk/arch/mips/include/asm/mach-excite/war.h rename to trunk/arch/mips/include/asm/mach-powertv/war.h index 1f82180c1598..7ac05ecc512b 100644 --- a/trunk/arch/mips/include/asm/mach-excite/war.h +++ b/trunk/arch/mips/include/asm/mach-powertv/war.h @@ -3,10 +3,13 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * + * This version for the PowerTV platform copied from the Malta version. + * * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + * Portions copyright (C) 2009 Cisco Systems, Inc. */ -#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H -#define __ASM_MIPS_MACH_EXCITE_WAR_H +#ifndef __ASM_MACH_POWERTV_WAR_H +#define __ASM_MACH_POWERTV_WAR_H #define R4600_V1_INDEX_ICACHEOP_WAR 0 #define R4600_V1_HIT_CACHEOP_WAR 0 @@ -14,12 +17,12 @@ #define R5432_CP0_INTERRUPT_WAR 0 #define BCM1250_M3_WAR 0 #define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 1 #define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 1 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 #define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */ +#endif /* __ASM_MACH_POWERTV_WAR_H */ diff --git a/trunk/arch/mips/include/asm/mips-boards/bonito64.h b/trunk/arch/mips/include/asm/mips-boards/bonito64.h index a576ce044c3c..d14e2adc4be5 100644 --- a/trunk/arch/mips/include/asm/mips-boards/bonito64.h +++ b/trunk/arch/mips/include/asm/mips-boards/bonito64.h @@ -26,11 +26,6 @@ /* offsets from base register */ #define BONITO(x) (x) -#elif defined(CONFIG_LEMOTE_FULOONG2E) - -#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) -#define BONITO_IRQ_BASE 32 - #else /* diff --git a/trunk/arch/mips/include/asm/mmu_context.h b/trunk/arch/mips/include/asm/mmu_context.h index 6083db586500..145bb81ccaa5 100644 --- a/trunk/arch/mips/include/asm/mmu_context.h +++ b/trunk/arch/mips/include/asm/mmu_context.h @@ -24,6 +24,33 @@ #endif /* SMTC */ #include +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT + +#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ + tlbmiss_handler_setup_pgd((unsigned long)(pgd)) + +static inline void tlbmiss_handler_setup_pgd(unsigned long pgd) +{ + /* Check for swapper_pg_dir and convert to physical address. */ + if ((pgd & CKSEG3) == CKSEG0) + pgd = CPHYSADDR(pgd); + write_c0_context(pgd << 11); +} + +#define TLBMISS_HANDLER_SETUP() \ + do { \ + TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir); \ + write_c0_xcontext((unsigned long) smp_processor_id() << 51); \ + } while (0) + + +static inline unsigned long get_current_pgd(void) +{ + return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL); +} + +#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/ + /* * For the fast tlb miss handlers, we keep a per cpu array of pointers * to the current pgd for each processor. Also, the proc. id is stuffed @@ -46,7 +73,7 @@ extern unsigned long pgd_current[]; back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif - +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/ #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) #define ASID_INC 0x40 diff --git a/trunk/arch/mips/include/asm/octeon/cvmx-agl-defs.h b/trunk/arch/mips/include/asm/octeon/cvmx-agl-defs.h new file mode 100644 index 000000000000..ec94b9ab7be1 --- /dev/null +++ b/trunk/arch/mips/include/asm/octeon/cvmx-agl-defs.h @@ -0,0 +1,1194 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_AGL_DEFS_H__ +#define __CVMX_AGL_DEFS_H__ + +#define CVMX_AGL_GMX_BAD_REG \ + CVMX_ADD_IO_SEG(0x00011800E0000518ull) +#define CVMX_AGL_GMX_BIST \ + CVMX_ADD_IO_SEG(0x00011800E0000400ull) +#define CVMX_AGL_GMX_DRV_CTL \ + CVMX_ADD_IO_SEG(0x00011800E00007F0ull) +#define CVMX_AGL_GMX_INF_MODE \ + CVMX_ADD_IO_SEG(0x00011800E00007F8ull) +#define CVMX_AGL_GMX_PRTX_CFG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000010ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM0(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000180ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM1(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000188ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM2(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000190ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM3(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000198ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM4(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00001A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM5(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00001A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CAM_EN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000108ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_ADR_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000100ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_DECISION(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000040ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_CHK(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000020ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000018ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_MAX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000030ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_FRM_MIN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000028ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_IFG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000058ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_INT_EN(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000008ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_INT_REG(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000000ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_JABBER(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000038ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_PAUSE_DROP_TIME(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000068ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000050ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000088ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000098ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_DMAC(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_OCTS_DRP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000B8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000080ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000C0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000090ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_DMAC(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00000B0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RXX_UDD_SKP(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000048ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_RX_BP_DROPX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000420ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_BP_OFFX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000460ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_BP_ONX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000440ull + (((offset) & 1) * 8)) +#define CVMX_AGL_GMX_RX_PRT_INFO \ + CVMX_ADD_IO_SEG(0x00011800E00004E8ull) +#define CVMX_AGL_GMX_RX_TX_STATUS \ + CVMX_ADD_IO_SEG(0x00011800E00007E8ull) +#define CVMX_AGL_GMX_SMACX(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000230ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_STAT_BP \ + CVMX_ADD_IO_SEG(0x00011800E0000520ull) +#define CVMX_AGL_GMX_TXX_APPEND(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000218ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000270ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_MIN_PKT(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000240ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_PKT_INTERVAL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000248ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_PKT_TIME(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000238ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_TOGO(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000258ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_PAUSE_ZERO(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000260ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_SOFT_PAUSE(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000250ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT0(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000280ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT1(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000288ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT2(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000290ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT3(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000298ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT4(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002A0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT5(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002A8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT6(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002B0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT7(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002B8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT8(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002C0ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STAT9(offset) \ + CVMX_ADD_IO_SEG(0x00011800E00002C8ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_STATS_CTL(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000268ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TXX_THRESH(offset) \ + CVMX_ADD_IO_SEG(0x00011800E0000210ull + (((offset) & 1) * 2048)) +#define CVMX_AGL_GMX_TX_BP \ + CVMX_ADD_IO_SEG(0x00011800E00004D0ull) +#define CVMX_AGL_GMX_TX_COL_ATTEMPT \ + CVMX_ADD_IO_SEG(0x00011800E0000498ull) +#define CVMX_AGL_GMX_TX_IFG \ + CVMX_ADD_IO_SEG(0x00011800E0000488ull) +#define CVMX_AGL_GMX_TX_INT_EN \ + CVMX_ADD_IO_SEG(0x00011800E0000508ull) +#define CVMX_AGL_GMX_TX_INT_REG \ + CVMX_ADD_IO_SEG(0x00011800E0000500ull) +#define CVMX_AGL_GMX_TX_JAM \ + CVMX_ADD_IO_SEG(0x00011800E0000490ull) +#define CVMX_AGL_GMX_TX_LFSR \ + CVMX_ADD_IO_SEG(0x00011800E00004F8ull) +#define CVMX_AGL_GMX_TX_OVR_BP \ + CVMX_ADD_IO_SEG(0x00011800E00004C8ull) +#define CVMX_AGL_GMX_TX_PAUSE_PKT_DMAC \ + CVMX_ADD_IO_SEG(0x00011800E00004A0ull) +#define CVMX_AGL_GMX_TX_PAUSE_PKT_TYPE \ + CVMX_ADD_IO_SEG(0x00011800E00004A8ull) + +union cvmx_agl_gmx_bad_reg { + uint64_t u64; + struct cvmx_agl_gmx_bad_reg_s { + uint64_t reserved_38_63:26; + uint64_t txpsh1:1; + uint64_t txpop1:1; + uint64_t ovrflw1:1; + uint64_t txpsh:1; + uint64_t txpop:1; + uint64_t ovrflw:1; + uint64_t reserved_27_31:5; + uint64_t statovr:1; + uint64_t reserved_23_25:3; + uint64_t loststat:1; + uint64_t reserved_4_21:18; + uint64_t out_ovr:2; + uint64_t reserved_0_1:2; + } s; + struct cvmx_agl_gmx_bad_reg_s cn52xx; + struct cvmx_agl_gmx_bad_reg_s cn52xxp1; + struct cvmx_agl_gmx_bad_reg_cn56xx { + uint64_t reserved_35_63:29; + uint64_t txpsh:1; + uint64_t txpop:1; + uint64_t ovrflw:1; + uint64_t reserved_27_31:5; + uint64_t statovr:1; + uint64_t reserved_23_25:3; + uint64_t loststat:1; + uint64_t reserved_3_21:19; + uint64_t out_ovr:1; + uint64_t reserved_0_1:2; + } cn56xx; + struct cvmx_agl_gmx_bad_reg_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_bist { + uint64_t u64; + struct cvmx_agl_gmx_bist_s { + uint64_t reserved_10_63:54; + uint64_t status:10; + } s; + struct cvmx_agl_gmx_bist_s cn52xx; + struct cvmx_agl_gmx_bist_s cn52xxp1; + struct cvmx_agl_gmx_bist_s cn56xx; + struct cvmx_agl_gmx_bist_s cn56xxp1; +}; + +union cvmx_agl_gmx_drv_ctl { + uint64_t u64; + struct cvmx_agl_gmx_drv_ctl_s { + uint64_t reserved_49_63:15; + uint64_t byp_en1:1; + uint64_t reserved_45_47:3; + uint64_t pctl1:5; + uint64_t reserved_37_39:3; + uint64_t nctl1:5; + uint64_t reserved_17_31:15; + uint64_t byp_en:1; + uint64_t reserved_13_15:3; + uint64_t pctl:5; + uint64_t reserved_5_7:3; + uint64_t nctl:5; + } s; + struct cvmx_agl_gmx_drv_ctl_s cn52xx; + struct cvmx_agl_gmx_drv_ctl_s cn52xxp1; + struct cvmx_agl_gmx_drv_ctl_cn56xx { + uint64_t reserved_17_63:47; + uint64_t byp_en:1; + uint64_t reserved_13_15:3; + uint64_t pctl:5; + uint64_t reserved_5_7:3; + uint64_t nctl:5; + } cn56xx; + struct cvmx_agl_gmx_drv_ctl_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_inf_mode { + uint64_t u64; + struct cvmx_agl_gmx_inf_mode_s { + uint64_t reserved_2_63:62; + uint64_t en:1; + uint64_t reserved_0_0:1; + } s; + struct cvmx_agl_gmx_inf_mode_s cn52xx; + struct cvmx_agl_gmx_inf_mode_s cn52xxp1; + struct cvmx_agl_gmx_inf_mode_s cn56xx; + struct cvmx_agl_gmx_inf_mode_s cn56xxp1; +}; + +union cvmx_agl_gmx_prtx_cfg { + uint64_t u64; + struct cvmx_agl_gmx_prtx_cfg_s { + uint64_t reserved_6_63:58; + uint64_t tx_en:1; + uint64_t rx_en:1; + uint64_t slottime:1; + uint64_t duplex:1; + uint64_t speed:1; + uint64_t en:1; + } s; + struct cvmx_agl_gmx_prtx_cfg_s cn52xx; + struct cvmx_agl_gmx_prtx_cfg_s cn52xxp1; + struct cvmx_agl_gmx_prtx_cfg_s cn56xx; + struct cvmx_agl_gmx_prtx_cfg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam0 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam0_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam0_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam1 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam1_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam1_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam2 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam2_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam2_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam3 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam3_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam3_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam4 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam4_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam4_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam5 { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam5_s { + uint64_t adr:64; + } s; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam5_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_cam_en { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_cam_en_s { + uint64_t reserved_8_63:56; + uint64_t en:8; + } s; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_cam_en_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_adr_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_adr_ctl_s { + uint64_t reserved_4_63:60; + uint64_t cam_mode:1; + uint64_t mcst:2; + uint64_t bcst:1; + } s; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_adr_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_decision { + uint64_t u64; + struct cvmx_agl_gmx_rxx_decision_s { + uint64_t reserved_5_63:59; + uint64_t cnt:5; + } s; + struct cvmx_agl_gmx_rxx_decision_s cn52xx; + struct cvmx_agl_gmx_rxx_decision_s cn52xxp1; + struct cvmx_agl_gmx_rxx_decision_s cn56xx; + struct cvmx_agl_gmx_rxx_decision_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_chk { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_chk_s { + uint64_t reserved_9_63:55; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_frm_chk_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_chk_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_chk_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_chk_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_ctl_s { + uint64_t reserved_10_63:54; + uint64_t pre_align:1; + uint64_t pad_len:1; + uint64_t vlan_len:1; + uint64_t pre_free:1; + uint64_t ctl_smac:1; + uint64_t ctl_mcst:1; + uint64_t ctl_bck:1; + uint64_t ctl_drp:1; + uint64_t pre_strp:1; + uint64_t pre_chk:1; + } s; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_max { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_max_s { + uint64_t reserved_16_63:48; + uint64_t len:16; + } s; + struct cvmx_agl_gmx_rxx_frm_max_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_max_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_max_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_max_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_frm_min { + uint64_t u64; + struct cvmx_agl_gmx_rxx_frm_min_s { + uint64_t reserved_16_63:48; + uint64_t len:16; + } s; + struct cvmx_agl_gmx_rxx_frm_min_s cn52xx; + struct cvmx_agl_gmx_rxx_frm_min_s cn52xxp1; + struct cvmx_agl_gmx_rxx_frm_min_s cn56xx; + struct cvmx_agl_gmx_rxx_frm_min_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_ifg { + uint64_t u64; + struct cvmx_agl_gmx_rxx_ifg_s { + uint64_t reserved_4_63:60; + uint64_t ifg:4; + } s; + struct cvmx_agl_gmx_rxx_ifg_s cn52xx; + struct cvmx_agl_gmx_rxx_ifg_s cn52xxp1; + struct cvmx_agl_gmx_rxx_ifg_s cn56xx; + struct cvmx_agl_gmx_rxx_ifg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_int_en { + uint64_t u64; + struct cvmx_agl_gmx_rxx_int_en_s { + uint64_t reserved_20_63:44; + uint64_t pause_drp:1; + uint64_t reserved_16_18:3; + uint64_t ifgerr:1; + uint64_t coldet:1; + uint64_t falerr:1; + uint64_t rsverr:1; + uint64_t pcterr:1; + uint64_t ovrerr:1; + uint64_t reserved_9_9:1; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_int_en_s cn52xx; + struct cvmx_agl_gmx_rxx_int_en_s cn52xxp1; + struct cvmx_agl_gmx_rxx_int_en_s cn56xx; + struct cvmx_agl_gmx_rxx_int_en_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_int_reg { + uint64_t u64; + struct cvmx_agl_gmx_rxx_int_reg_s { + uint64_t reserved_20_63:44; + uint64_t pause_drp:1; + uint64_t reserved_16_18:3; + uint64_t ifgerr:1; + uint64_t coldet:1; + uint64_t falerr:1; + uint64_t rsverr:1; + uint64_t pcterr:1; + uint64_t ovrerr:1; + uint64_t reserved_9_9:1; + uint64_t skperr:1; + uint64_t rcverr:1; + uint64_t lenerr:1; + uint64_t alnerr:1; + uint64_t fcserr:1; + uint64_t jabber:1; + uint64_t maxerr:1; + uint64_t reserved_1_1:1; + uint64_t minerr:1; + } s; + struct cvmx_agl_gmx_rxx_int_reg_s cn52xx; + struct cvmx_agl_gmx_rxx_int_reg_s cn52xxp1; + struct cvmx_agl_gmx_rxx_int_reg_s cn56xx; + struct cvmx_agl_gmx_rxx_int_reg_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_jabber { + uint64_t u64; + struct cvmx_agl_gmx_rxx_jabber_s { + uint64_t reserved_16_63:48; + uint64_t cnt:16; + } s; + struct cvmx_agl_gmx_rxx_jabber_s cn52xx; + struct cvmx_agl_gmx_rxx_jabber_s cn52xxp1; + struct cvmx_agl_gmx_rxx_jabber_s cn56xx; + struct cvmx_agl_gmx_rxx_jabber_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_pause_drop_time { + uint64_t u64; + struct cvmx_agl_gmx_rxx_pause_drop_time_s { + uint64_t reserved_16_63:48; + uint64_t status:16; + } s; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xx; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn52xxp1; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xx; + struct cvmx_agl_gmx_rxx_pause_drop_time_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_ctl_s { + uint64_t reserved_1_63:63; + uint64_t rd_clr:1; + } s; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_dmac { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_octs_drp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s { + uint64_t reserved_48_63:16; + uint64_t cnt:48; + } s; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_octs_drp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_bad { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_bad_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_ctl { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_dmac { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_stats_pkts_drp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s { + uint64_t reserved_32_63:32; + uint64_t cnt:32; + } s; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xx; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xx; + struct cvmx_agl_gmx_rxx_stats_pkts_drp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rxx_udd_skp { + uint64_t u64; + struct cvmx_agl_gmx_rxx_udd_skp_s { + uint64_t reserved_9_63:55; + uint64_t fcssel:1; + uint64_t reserved_7_7:1; + uint64_t len:7; + } s; + struct cvmx_agl_gmx_rxx_udd_skp_s cn52xx; + struct cvmx_agl_gmx_rxx_udd_skp_s cn52xxp1; + struct cvmx_agl_gmx_rxx_udd_skp_s cn56xx; + struct cvmx_agl_gmx_rxx_udd_skp_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_dropx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_dropx_s { + uint64_t reserved_6_63:58; + uint64_t mark:6; + } s; + struct cvmx_agl_gmx_rx_bp_dropx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_dropx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_dropx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_dropx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_offx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_offx_s { + uint64_t reserved_6_63:58; + uint64_t mark:6; + } s; + struct cvmx_agl_gmx_rx_bp_offx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_offx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_offx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_offx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_bp_onx { + uint64_t u64; + struct cvmx_agl_gmx_rx_bp_onx_s { + uint64_t reserved_9_63:55; + uint64_t mark:9; + } s; + struct cvmx_agl_gmx_rx_bp_onx_s cn52xx; + struct cvmx_agl_gmx_rx_bp_onx_s cn52xxp1; + struct cvmx_agl_gmx_rx_bp_onx_s cn56xx; + struct cvmx_agl_gmx_rx_bp_onx_s cn56xxp1; +}; + +union cvmx_agl_gmx_rx_prt_info { + uint64_t u64; + struct cvmx_agl_gmx_rx_prt_info_s { + uint64_t reserved_18_63:46; + uint64_t drop:2; + uint64_t reserved_2_15:14; + uint64_t commit:2; + } s; + struct cvmx_agl_gmx_rx_prt_info_s cn52xx; + struct cvmx_agl_gmx_rx_prt_info_s cn52xxp1; + struct cvmx_agl_gmx_rx_prt_info_cn56xx { + uint64_t reserved_17_63:47; + uint64_t drop:1; + uint64_t reserved_1_15:15; + uint64_t commit:1; + } cn56xx; + struct cvmx_agl_gmx_rx_prt_info_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_rx_tx_status { + uint64_t u64; + struct cvmx_agl_gmx_rx_tx_status_s { + uint64_t reserved_6_63:58; + uint64_t tx:2; + uint64_t reserved_2_3:2; + uint64_t rx:2; + } s; + struct cvmx_agl_gmx_rx_tx_status_s cn52xx; + struct cvmx_agl_gmx_rx_tx_status_s cn52xxp1; + struct cvmx_agl_gmx_rx_tx_status_cn56xx { + uint64_t reserved_5_63:59; + uint64_t tx:1; + uint64_t reserved_1_3:3; + uint64_t rx:1; + } cn56xx; + struct cvmx_agl_gmx_rx_tx_status_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_smacx { + uint64_t u64; + struct cvmx_agl_gmx_smacx_s { + uint64_t reserved_48_63:16; + uint64_t smac:48; + } s; + struct cvmx_agl_gmx_smacx_s cn52xx; + struct cvmx_agl_gmx_smacx_s cn52xxp1; + struct cvmx_agl_gmx_smacx_s cn56xx; + struct cvmx_agl_gmx_smacx_s cn56xxp1; +}; + +union cvmx_agl_gmx_stat_bp { + uint64_t u64; + struct cvmx_agl_gmx_stat_bp_s { + uint64_t reserved_17_63:47; + uint64_t bp:1; + uint64_t cnt:16; + } s; + struct cvmx_agl_gmx_stat_bp_s cn52xx; + struct cvmx_agl_gmx_stat_bp_s cn52xxp1; + struct cvmx_agl_gmx_stat_bp_s cn56xx; + struct cvmx_agl_gmx_stat_bp_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_append { + uint64_t u64; + struct cvmx_agl_gmx_txx_append_s { + uint64_t reserved_4_63:60; + uint64_t force_fcs:1; + uint64_t fcs:1; + uint64_t pad:1; + uint64_t preamble:1; + } s; + struct cvmx_agl_gmx_txx_append_s cn52xx; + struct cvmx_agl_gmx_txx_append_s cn52xxp1; + struct cvmx_agl_gmx_txx_append_s cn56xx; + struct cvmx_agl_gmx_txx_append_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_ctl { + uint64_t u64; + struct cvmx_agl_gmx_txx_ctl_s { + uint64_t reserved_2_63:62; + uint64_t xsdef_en:1; + uint64_t xscol_en:1; + } s; + struct cvmx_agl_gmx_txx_ctl_s cn52xx; + struct cvmx_agl_gmx_txx_ctl_s cn52xxp1; + struct cvmx_agl_gmx_txx_ctl_s cn56xx; + struct cvmx_agl_gmx_txx_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_min_pkt { + uint64_t u64; + struct cvmx_agl_gmx_txx_min_pkt_s { + uint64_t reserved_8_63:56; + uint64_t min_size:8; + } s; + struct cvmx_agl_gmx_txx_min_pkt_s cn52xx; + struct cvmx_agl_gmx_txx_min_pkt_s cn52xxp1; + struct cvmx_agl_gmx_txx_min_pkt_s cn56xx; + struct cvmx_agl_gmx_txx_min_pkt_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_pkt_interval { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s { + uint64_t reserved_16_63:48; + uint64_t interval:16; + } s; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xx; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xx; + struct cvmx_agl_gmx_txx_pause_pkt_interval_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_pkt_time { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_pkt_time_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xx; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xx; + struct cvmx_agl_gmx_txx_pause_pkt_time_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_togo { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_togo_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_pause_togo_s cn52xx; + struct cvmx_agl_gmx_txx_pause_togo_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_togo_s cn56xx; + struct cvmx_agl_gmx_txx_pause_togo_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_pause_zero { + uint64_t u64; + struct cvmx_agl_gmx_txx_pause_zero_s { + uint64_t reserved_1_63:63; + uint64_t send:1; + } s; + struct cvmx_agl_gmx_txx_pause_zero_s cn52xx; + struct cvmx_agl_gmx_txx_pause_zero_s cn52xxp1; + struct cvmx_agl_gmx_txx_pause_zero_s cn56xx; + struct cvmx_agl_gmx_txx_pause_zero_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_soft_pause { + uint64_t u64; + struct cvmx_agl_gmx_txx_soft_pause_s { + uint64_t reserved_16_63:48; + uint64_t time:16; + } s; + struct cvmx_agl_gmx_txx_soft_pause_s cn52xx; + struct cvmx_agl_gmx_txx_soft_pause_s cn52xxp1; + struct cvmx_agl_gmx_txx_soft_pause_s cn56xx; + struct cvmx_agl_gmx_txx_soft_pause_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat0 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat0_s { + uint64_t xsdef:32; + uint64_t xscol:32; + } s; + struct cvmx_agl_gmx_txx_stat0_s cn52xx; + struct cvmx_agl_gmx_txx_stat0_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat0_s cn56xx; + struct cvmx_agl_gmx_txx_stat0_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat1 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat1_s { + uint64_t scol:32; + uint64_t mcol:32; + } s; + struct cvmx_agl_gmx_txx_stat1_s cn52xx; + struct cvmx_agl_gmx_txx_stat1_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat1_s cn56xx; + struct cvmx_agl_gmx_txx_stat1_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat2 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat2_s { + uint64_t reserved_48_63:16; + uint64_t octs:48; + } s; + struct cvmx_agl_gmx_txx_stat2_s cn52xx; + struct cvmx_agl_gmx_txx_stat2_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat2_s cn56xx; + struct cvmx_agl_gmx_txx_stat2_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat3 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat3_s { + uint64_t reserved_32_63:32; + uint64_t pkts:32; + } s; + struct cvmx_agl_gmx_txx_stat3_s cn52xx; + struct cvmx_agl_gmx_txx_stat3_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat3_s cn56xx; + struct cvmx_agl_gmx_txx_stat3_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat4 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat4_s { + uint64_t hist1:32; + uint64_t hist0:32; + } s; + struct cvmx_agl_gmx_txx_stat4_s cn52xx; + struct cvmx_agl_gmx_txx_stat4_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat4_s cn56xx; + struct cvmx_agl_gmx_txx_stat4_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat5 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat5_s { + uint64_t hist3:32; + uint64_t hist2:32; + } s; + struct cvmx_agl_gmx_txx_stat5_s cn52xx; + struct cvmx_agl_gmx_txx_stat5_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat5_s cn56xx; + struct cvmx_agl_gmx_txx_stat5_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat6 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat6_s { + uint64_t hist5:32; + uint64_t hist4:32; + } s; + struct cvmx_agl_gmx_txx_stat6_s cn52xx; + struct cvmx_agl_gmx_txx_stat6_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat6_s cn56xx; + struct cvmx_agl_gmx_txx_stat6_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat7 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat7_s { + uint64_t hist7:32; + uint64_t hist6:32; + } s; + struct cvmx_agl_gmx_txx_stat7_s cn52xx; + struct cvmx_agl_gmx_txx_stat7_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat7_s cn56xx; + struct cvmx_agl_gmx_txx_stat7_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat8 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat8_s { + uint64_t mcst:32; + uint64_t bcst:32; + } s; + struct cvmx_agl_gmx_txx_stat8_s cn52xx; + struct cvmx_agl_gmx_txx_stat8_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat8_s cn56xx; + struct cvmx_agl_gmx_txx_stat8_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stat9 { + uint64_t u64; + struct cvmx_agl_gmx_txx_stat9_s { + uint64_t undflw:32; + uint64_t ctl:32; + } s; + struct cvmx_agl_gmx_txx_stat9_s cn52xx; + struct cvmx_agl_gmx_txx_stat9_s cn52xxp1; + struct cvmx_agl_gmx_txx_stat9_s cn56xx; + struct cvmx_agl_gmx_txx_stat9_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_stats_ctl { + uint64_t u64; + struct cvmx_agl_gmx_txx_stats_ctl_s { + uint64_t reserved_1_63:63; + uint64_t rd_clr:1; + } s; + struct cvmx_agl_gmx_txx_stats_ctl_s cn52xx; + struct cvmx_agl_gmx_txx_stats_ctl_s cn52xxp1; + struct cvmx_agl_gmx_txx_stats_ctl_s cn56xx; + struct cvmx_agl_gmx_txx_stats_ctl_s cn56xxp1; +}; + +union cvmx_agl_gmx_txx_thresh { + uint64_t u64; + struct cvmx_agl_gmx_txx_thresh_s { + uint64_t reserved_6_63:58; + uint64_t cnt:6; + } s; + struct cvmx_agl_gmx_txx_thresh_s cn52xx; + struct cvmx_agl_gmx_txx_thresh_s cn52xxp1; + struct cvmx_agl_gmx_txx_thresh_s cn56xx; + struct cvmx_agl_gmx_txx_thresh_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_bp { + uint64_t u64; + struct cvmx_agl_gmx_tx_bp_s { + uint64_t reserved_2_63:62; + uint64_t bp:2; + } s; + struct cvmx_agl_gmx_tx_bp_s cn52xx; + struct cvmx_agl_gmx_tx_bp_s cn52xxp1; + struct cvmx_agl_gmx_tx_bp_cn56xx { + uint64_t reserved_1_63:63; + uint64_t bp:1; + } cn56xx; + struct cvmx_agl_gmx_tx_bp_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_col_attempt { + uint64_t u64; + struct cvmx_agl_gmx_tx_col_attempt_s { + uint64_t reserved_5_63:59; + uint64_t limit:5; + } s; + struct cvmx_agl_gmx_tx_col_attempt_s cn52xx; + struct cvmx_agl_gmx_tx_col_attempt_s cn52xxp1; + struct cvmx_agl_gmx_tx_col_attempt_s cn56xx; + struct cvmx_agl_gmx_tx_col_attempt_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_ifg { + uint64_t u64; + struct cvmx_agl_gmx_tx_ifg_s { + uint64_t reserved_8_63:56; + uint64_t ifg2:4; + uint64_t ifg1:4; + } s; + struct cvmx_agl_gmx_tx_ifg_s cn52xx; + struct cvmx_agl_gmx_tx_ifg_s cn52xxp1; + struct cvmx_agl_gmx_tx_ifg_s cn56xx; + struct cvmx_agl_gmx_tx_ifg_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_int_en { + uint64_t u64; + struct cvmx_agl_gmx_tx_int_en_s { + uint64_t reserved_18_63:46; + uint64_t late_col:2; + uint64_t reserved_14_15:2; + uint64_t xsdef:2; + uint64_t reserved_10_11:2; + uint64_t xscol:2; + uint64_t reserved_4_7:4; + uint64_t undflw:2; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } s; + struct cvmx_agl_gmx_tx_int_en_s cn52xx; + struct cvmx_agl_gmx_tx_int_en_s cn52xxp1; + struct cvmx_agl_gmx_tx_int_en_cn56xx { + uint64_t reserved_17_63:47; + uint64_t late_col:1; + uint64_t reserved_13_15:3; + uint64_t xsdef:1; + uint64_t reserved_9_11:3; + uint64_t xscol:1; + uint64_t reserved_3_7:5; + uint64_t undflw:1; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } cn56xx; + struct cvmx_agl_gmx_tx_int_en_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_int_reg { + uint64_t u64; + struct cvmx_agl_gmx_tx_int_reg_s { + uint64_t reserved_18_63:46; + uint64_t late_col:2; + uint64_t reserved_14_15:2; + uint64_t xsdef:2; + uint64_t reserved_10_11:2; + uint64_t xscol:2; + uint64_t reserved_4_7:4; + uint64_t undflw:2; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } s; + struct cvmx_agl_gmx_tx_int_reg_s cn52xx; + struct cvmx_agl_gmx_tx_int_reg_s cn52xxp1; + struct cvmx_agl_gmx_tx_int_reg_cn56xx { + uint64_t reserved_17_63:47; + uint64_t late_col:1; + uint64_t reserved_13_15:3; + uint64_t xsdef:1; + uint64_t reserved_9_11:3; + uint64_t xscol:1; + uint64_t reserved_3_7:5; + uint64_t undflw:1; + uint64_t reserved_1_1:1; + uint64_t pko_nxa:1; + } cn56xx; + struct cvmx_agl_gmx_tx_int_reg_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_jam { + uint64_t u64; + struct cvmx_agl_gmx_tx_jam_s { + uint64_t reserved_8_63:56; + uint64_t jam:8; + } s; + struct cvmx_agl_gmx_tx_jam_s cn52xx; + struct cvmx_agl_gmx_tx_jam_s cn52xxp1; + struct cvmx_agl_gmx_tx_jam_s cn56xx; + struct cvmx_agl_gmx_tx_jam_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_lfsr { + uint64_t u64; + struct cvmx_agl_gmx_tx_lfsr_s { + uint64_t reserved_16_63:48; + uint64_t lfsr:16; + } s; + struct cvmx_agl_gmx_tx_lfsr_s cn52xx; + struct cvmx_agl_gmx_tx_lfsr_s cn52xxp1; + struct cvmx_agl_gmx_tx_lfsr_s cn56xx; + struct cvmx_agl_gmx_tx_lfsr_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_ovr_bp { + uint64_t u64; + struct cvmx_agl_gmx_tx_ovr_bp_s { + uint64_t reserved_10_63:54; + uint64_t en:2; + uint64_t reserved_6_7:2; + uint64_t bp:2; + uint64_t reserved_2_3:2; + uint64_t ign_full:2; + } s; + struct cvmx_agl_gmx_tx_ovr_bp_s cn52xx; + struct cvmx_agl_gmx_tx_ovr_bp_s cn52xxp1; + struct cvmx_agl_gmx_tx_ovr_bp_cn56xx { + uint64_t reserved_9_63:55; + uint64_t en:1; + uint64_t reserved_5_7:3; + uint64_t bp:1; + uint64_t reserved_1_3:3; + uint64_t ign_full:1; + } cn56xx; + struct cvmx_agl_gmx_tx_ovr_bp_cn56xx cn56xxp1; +}; + +union cvmx_agl_gmx_tx_pause_pkt_dmac { + uint64_t u64; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s { + uint64_t reserved_48_63:16; + uint64_t dmac:48; + } s; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xx; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn52xxp1; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xx; + struct cvmx_agl_gmx_tx_pause_pkt_dmac_s cn56xxp1; +}; + +union cvmx_agl_gmx_tx_pause_pkt_type { + uint64_t u64; + struct cvmx_agl_gmx_tx_pause_pkt_type_s { + uint64_t reserved_16_63:48; + uint64_t type:16; + } s; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xx; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn52xxp1; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xx; + struct cvmx_agl_gmx_tx_pause_pkt_type_s cn56xxp1; +}; + +#endif diff --git a/trunk/arch/mips/include/asm/octeon/cvmx-mixx-defs.h b/trunk/arch/mips/include/asm/octeon/cvmx-mixx-defs.h new file mode 100644 index 000000000000..dab6dca492f9 --- /dev/null +++ b/trunk/arch/mips/include/asm/octeon/cvmx-mixx-defs.h @@ -0,0 +1,248 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_MIXX_DEFS_H__ +#define __CVMX_MIXX_DEFS_H__ + +#define CVMX_MIXX_BIST(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100078ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_CTL(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100020ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_INTENA(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100050ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100030ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRHWM(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100028ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRING1(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100010ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_IRING2(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100018ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ISR(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100048ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100040ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORHWM(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100038ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORING1(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100000ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_ORING2(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100008ull + (((offset) & 1) * 2048)) +#define CVMX_MIXX_REMCNT(offset) \ + CVMX_ADD_IO_SEG(0x0001070000100058ull + (((offset) & 1) * 2048)) + +union cvmx_mixx_bist { + uint64_t u64; + struct cvmx_mixx_bist_s { + uint64_t reserved_4_63:60; + uint64_t mrqdat:1; + uint64_t ipfdat:1; + uint64_t irfdat:1; + uint64_t orfdat:1; + } s; + struct cvmx_mixx_bist_s cn52xx; + struct cvmx_mixx_bist_s cn52xxp1; + struct cvmx_mixx_bist_s cn56xx; + struct cvmx_mixx_bist_s cn56xxp1; +}; + +union cvmx_mixx_ctl { + uint64_t u64; + struct cvmx_mixx_ctl_s { + uint64_t reserved_8_63:56; + uint64_t crc_strip:1; + uint64_t busy:1; + uint64_t en:1; + uint64_t reset:1; + uint64_t lendian:1; + uint64_t nbtarb:1; + uint64_t mrq_hwm:2; + } s; + struct cvmx_mixx_ctl_s cn52xx; + struct cvmx_mixx_ctl_s cn52xxp1; + struct cvmx_mixx_ctl_s cn56xx; + struct cvmx_mixx_ctl_s cn56xxp1; +}; + +union cvmx_mixx_intena { + uint64_t u64; + struct cvmx_mixx_intena_s { + uint64_t reserved_7_63:57; + uint64_t orunena:1; + uint64_t irunena:1; + uint64_t data_drpena:1; + uint64_t ithena:1; + uint64_t othena:1; + uint64_t ivfena:1; + uint64_t ovfena:1; + } s; + struct cvmx_mixx_intena_s cn52xx; + struct cvmx_mixx_intena_s cn52xxp1; + struct cvmx_mixx_intena_s cn56xx; + struct cvmx_mixx_intena_s cn56xxp1; +}; + +union cvmx_mixx_ircnt { + uint64_t u64; + struct cvmx_mixx_ircnt_s { + uint64_t reserved_20_63:44; + uint64_t ircnt:20; + } s; + struct cvmx_mixx_ircnt_s cn52xx; + struct cvmx_mixx_ircnt_s cn52xxp1; + struct cvmx_mixx_ircnt_s cn56xx; + struct cvmx_mixx_ircnt_s cn56xxp1; +}; + +union cvmx_mixx_irhwm { + uint64_t u64; + struct cvmx_mixx_irhwm_s { + uint64_t reserved_40_63:24; + uint64_t ibplwm:20; + uint64_t irhwm:20; + } s; + struct cvmx_mixx_irhwm_s cn52xx; + struct cvmx_mixx_irhwm_s cn52xxp1; + struct cvmx_mixx_irhwm_s cn56xx; + struct cvmx_mixx_irhwm_s cn56xxp1; +}; + +union cvmx_mixx_iring1 { + uint64_t u64; + struct cvmx_mixx_iring1_s { + uint64_t reserved_60_63:4; + uint64_t isize:20; + uint64_t reserved_36_39:4; + uint64_t ibase:33; + uint64_t reserved_0_2:3; + } s; + struct cvmx_mixx_iring1_s cn52xx; + struct cvmx_mixx_iring1_s cn52xxp1; + struct cvmx_mixx_iring1_s cn56xx; + struct cvmx_mixx_iring1_s cn56xxp1; +}; + +union cvmx_mixx_iring2 { + uint64_t u64; + struct cvmx_mixx_iring2_s { + uint64_t reserved_52_63:12; + uint64_t itlptr:20; + uint64_t reserved_20_31:12; + uint64_t idbell:20; + } s; + struct cvmx_mixx_iring2_s cn52xx; + struct cvmx_mixx_iring2_s cn52xxp1; + struct cvmx_mixx_iring2_s cn56xx; + struct cvmx_mixx_iring2_s cn56xxp1; +}; + +union cvmx_mixx_isr { + uint64_t u64; + struct cvmx_mixx_isr_s { + uint64_t reserved_7_63:57; + uint64_t orun:1; + uint64_t irun:1; + uint64_t data_drp:1; + uint64_t irthresh:1; + uint64_t orthresh:1; + uint64_t idblovf:1; + uint64_t odblovf:1; + } s; + struct cvmx_mixx_isr_s cn52xx; + struct cvmx_mixx_isr_s cn52xxp1; + struct cvmx_mixx_isr_s cn56xx; + struct cvmx_mixx_isr_s cn56xxp1; +}; + +union cvmx_mixx_orcnt { + uint64_t u64; + struct cvmx_mixx_orcnt_s { + uint64_t reserved_20_63:44; + uint64_t orcnt:20; + } s; + struct cvmx_mixx_orcnt_s cn52xx; + struct cvmx_mixx_orcnt_s cn52xxp1; + struct cvmx_mixx_orcnt_s cn56xx; + struct cvmx_mixx_orcnt_s cn56xxp1; +}; + +union cvmx_mixx_orhwm { + uint64_t u64; + struct cvmx_mixx_orhwm_s { + uint64_t reserved_20_63:44; + uint64_t orhwm:20; + } s; + struct cvmx_mixx_orhwm_s cn52xx; + struct cvmx_mixx_orhwm_s cn52xxp1; + struct cvmx_mixx_orhwm_s cn56xx; + struct cvmx_mixx_orhwm_s cn56xxp1; +}; + +union cvmx_mixx_oring1 { + uint64_t u64; + struct cvmx_mixx_oring1_s { + uint64_t reserved_60_63:4; + uint64_t osize:20; + uint64_t reserved_36_39:4; + uint64_t obase:33; + uint64_t reserved_0_2:3; + } s; + struct cvmx_mixx_oring1_s cn52xx; + struct cvmx_mixx_oring1_s cn52xxp1; + struct cvmx_mixx_oring1_s cn56xx; + struct cvmx_mixx_oring1_s cn56xxp1; +}; + +union cvmx_mixx_oring2 { + uint64_t u64; + struct cvmx_mixx_oring2_s { + uint64_t reserved_52_63:12; + uint64_t otlptr:20; + uint64_t reserved_20_31:12; + uint64_t odbell:20; + } s; + struct cvmx_mixx_oring2_s cn52xx; + struct cvmx_mixx_oring2_s cn52xxp1; + struct cvmx_mixx_oring2_s cn56xx; + struct cvmx_mixx_oring2_s cn56xxp1; +}; + +union cvmx_mixx_remcnt { + uint64_t u64; + struct cvmx_mixx_remcnt_s { + uint64_t reserved_52_63:12; + uint64_t iremcnt:20; + uint64_t reserved_20_31:12; + uint64_t oremcnt:20; + } s; + struct cvmx_mixx_remcnt_s cn52xx; + struct cvmx_mixx_remcnt_s cn52xxp1; + struct cvmx_mixx_remcnt_s cn56xx; + struct cvmx_mixx_remcnt_s cn56xxp1; +}; + +#endif diff --git a/trunk/arch/mips/include/asm/octeon/cvmx-smix-defs.h b/trunk/arch/mips/include/asm/octeon/cvmx-smix-defs.h new file mode 100644 index 000000000000..9ae45fcbe3e3 --- /dev/null +++ b/trunk/arch/mips/include/asm/octeon/cvmx-smix-defs.h @@ -0,0 +1,178 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_SMIX_DEFS_H__ +#define __CVMX_SMIX_DEFS_H__ + +#define CVMX_SMIX_CLK(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001818ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_CMD(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001800ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_EN(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001820ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_RD_DAT(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001810ull + (((offset) & 1) * 256)) +#define CVMX_SMIX_WR_DAT(offset) \ + CVMX_ADD_IO_SEG(0x0001180000001808ull + (((offset) & 1) * 256)) + +union cvmx_smix_clk { + uint64_t u64; + struct cvmx_smix_clk_s { + uint64_t reserved_25_63:39; + uint64_t mode:1; + uint64_t reserved_21_23:3; + uint64_t sample_hi:5; + uint64_t sample_mode:1; + uint64_t reserved_14_14:1; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } s; + struct cvmx_smix_clk_cn30xx { + uint64_t reserved_21_63:43; + uint64_t sample_hi:5; + uint64_t reserved_14_15:2; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } cn30xx; + struct cvmx_smix_clk_cn30xx cn31xx; + struct cvmx_smix_clk_cn30xx cn38xx; + struct cvmx_smix_clk_cn30xx cn38xxp2; + struct cvmx_smix_clk_cn50xx { + uint64_t reserved_25_63:39; + uint64_t mode:1; + uint64_t reserved_21_23:3; + uint64_t sample_hi:5; + uint64_t reserved_14_15:2; + uint64_t clk_idle:1; + uint64_t preamble:1; + uint64_t sample:4; + uint64_t phase:8; + } cn50xx; + struct cvmx_smix_clk_s cn52xx; + struct cvmx_smix_clk_cn50xx cn52xxp1; + struct cvmx_smix_clk_s cn56xx; + struct cvmx_smix_clk_cn50xx cn56xxp1; + struct cvmx_smix_clk_cn30xx cn58xx; + struct cvmx_smix_clk_cn30xx cn58xxp1; +}; + +union cvmx_smix_cmd { + uint64_t u64; + struct cvmx_smix_cmd_s { + uint64_t reserved_18_63:46; + uint64_t phy_op:2; + uint64_t reserved_13_15:3; + uint64_t phy_adr:5; + uint64_t reserved_5_7:3; + uint64_t reg_adr:5; + } s; + struct cvmx_smix_cmd_cn30xx { + uint64_t reserved_17_63:47; + uint64_t phy_op:1; + uint64_t reserved_13_15:3; + uint64_t phy_adr:5; + uint64_t reserved_5_7:3; + uint64_t reg_adr:5; + } cn30xx; + struct cvmx_smix_cmd_cn30xx cn31xx; + struct cvmx_smix_cmd_cn30xx cn38xx; + struct cvmx_smix_cmd_cn30xx cn38xxp2; + struct cvmx_smix_cmd_s cn50xx; + struct cvmx_smix_cmd_s cn52xx; + struct cvmx_smix_cmd_s cn52xxp1; + struct cvmx_smix_cmd_s cn56xx; + struct cvmx_smix_cmd_s cn56xxp1; + struct cvmx_smix_cmd_cn30xx cn58xx; + struct cvmx_smix_cmd_cn30xx cn58xxp1; +}; + +union cvmx_smix_en { + uint64_t u64; + struct cvmx_smix_en_s { + uint64_t reserved_1_63:63; + uint64_t en:1; + } s; + struct cvmx_smix_en_s cn30xx; + struct cvmx_smix_en_s cn31xx; + struct cvmx_smix_en_s cn38xx; + struct cvmx_smix_en_s cn38xxp2; + struct cvmx_smix_en_s cn50xx; + struct cvmx_smix_en_s cn52xx; + struct cvmx_smix_en_s cn52xxp1; + struct cvmx_smix_en_s cn56xx; + struct cvmx_smix_en_s cn56xxp1; + struct cvmx_smix_en_s cn58xx; + struct cvmx_smix_en_s cn58xxp1; +}; + +union cvmx_smix_rd_dat { + uint64_t u64; + struct cvmx_smix_rd_dat_s { + uint64_t reserved_18_63:46; + uint64_t pending:1; + uint64_t val:1; + uint64_t dat:16; + } s; + struct cvmx_smix_rd_dat_s cn30xx; + struct cvmx_smix_rd_dat_s cn31xx; + struct cvmx_smix_rd_dat_s cn38xx; + struct cvmx_smix_rd_dat_s cn38xxp2; + struct cvmx_smix_rd_dat_s cn50xx; + struct cvmx_smix_rd_dat_s cn52xx; + struct cvmx_smix_rd_dat_s cn52xxp1; + struct cvmx_smix_rd_dat_s cn56xx; + struct cvmx_smix_rd_dat_s cn56xxp1; + struct cvmx_smix_rd_dat_s cn58xx; + struct cvmx_smix_rd_dat_s cn58xxp1; +}; + +union cvmx_smix_wr_dat { + uint64_t u64; + struct cvmx_smix_wr_dat_s { + uint64_t reserved_18_63:46; + uint64_t pending:1; + uint64_t val:1; + uint64_t dat:16; + } s; + struct cvmx_smix_wr_dat_s cn30xx; + struct cvmx_smix_wr_dat_s cn31xx; + struct cvmx_smix_wr_dat_s cn38xx; + struct cvmx_smix_wr_dat_s cn38xxp2; + struct cvmx_smix_wr_dat_s cn50xx; + struct cvmx_smix_wr_dat_s cn52xx; + struct cvmx_smix_wr_dat_s cn52xxp1; + struct cvmx_smix_wr_dat_s cn56xx; + struct cvmx_smix_wr_dat_s cn56xxp1; + struct cvmx_smix_wr_dat_s cn58xx; + struct cvmx_smix_wr_dat_s cn58xxp1; +}; + +#endif diff --git a/trunk/arch/mips/include/asm/octeon/octeon.h b/trunk/arch/mips/include/asm/octeon/octeon.h index cac9b1a206fc..4d0a8c61fc3e 100644 --- a/trunk/arch/mips/include/asm/octeon/octeon.h +++ b/trunk/arch/mips/include/asm/octeon/octeon.h @@ -47,6 +47,7 @@ struct octeon_cop2_state; extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state); extern void octeon_crypto_disable(struct octeon_cop2_state *state, unsigned long flags); +extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task); extern void octeon_init_cvmcount(void); diff --git a/trunk/arch/mips/include/asm/pgtable.h b/trunk/arch/mips/include/asm/pgtable.h index d6eb6134abec..1854336e56a2 100644 --- a/trunk/arch/mips/include/asm/pgtable.h +++ b/trunk/arch/mips/include/asm/pgtable.h @@ -389,6 +389,19 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma, #include +/* + * uncached accelerated TLB map for video memory access + */ +#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED +#define __HAVE_PHYS_MEM_ACCESS_PROT + +struct file; +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t *vma_prot); +#endif + /* * We provide our own get_unmapped area to cope with the virtual aliasing * constraints placed on us by the cache architecture. diff --git a/trunk/arch/mips/include/asm/sgialib.h b/trunk/arch/mips/include/asm/sgialib.h index bfce5c786f1c..63741ca1e422 100644 --- a/trunk/arch/mips/include/asm/sgialib.h +++ b/trunk/arch/mips/include/asm/sgialib.h @@ -85,8 +85,7 @@ extern void prom_identify_arch(void); extern PCHAR ArcGetEnvironmentVariable(PCHAR name); extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); -/* ARCS command line acquisition and parsing. */ -extern char *prom_getcmdline(void); +/* ARCS command line parsing. */ extern void prom_init_cmdline(void); /* Acquiring info about the current time, etc. */ diff --git a/trunk/arch/mips/include/asm/stackframe.h b/trunk/arch/mips/include/asm/stackframe.h index db0fa7b5aeaf..3b6da3330e32 100644 --- a/trunk/arch/mips/include/asm/stackframe.h +++ b/trunk/arch/mips/include/asm/stackframe.h @@ -51,9 +51,6 @@ LONG_S v1, PT_ACX(sp) #else mfhi v1 - LONG_S v1, PT_HI(sp) - mflo v1 - LONG_S v1, PT_LO(sp) #endif #ifdef CONFIG_32BIT LONG_S $8, PT_R8(sp) @@ -62,10 +59,17 @@ LONG_S $10, PT_R10(sp) LONG_S $11, PT_R11(sp) LONG_S $12, PT_R12(sp) +#ifndef CONFIG_CPU_HAS_SMARTMIPS + LONG_S v1, PT_HI(sp) + mflo v1 +#endif LONG_S $13, PT_R13(sp) LONG_S $14, PT_R14(sp) LONG_S $15, PT_R15(sp) LONG_S $24, PT_R24(sp) +#ifndef CONFIG_CPU_HAS_SMARTMIPS + LONG_S v1, PT_LO(sp) +#endif .endm .macro SAVE_STATIC @@ -83,15 +87,19 @@ #ifdef CONFIG_SMP #ifdef CONFIG_MIPS_MT_SMTC #define PTEBASE_SHIFT 19 /* TCBIND */ +#define CPU_ID_REG CP0_TCBIND +#define CPU_ID_MFC0 mfc0 +#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT) +#define PTEBASE_SHIFT 48 /* XCONTEXT */ +#define CPU_ID_REG CP0_XCONTEXT +#define CPU_ID_MFC0 MFC0 #else #define PTEBASE_SHIFT 23 /* CONTEXT */ +#define CPU_ID_REG CP0_CONTEXT +#define CPU_ID_MFC0 MFC0 #endif .macro get_saved_sp /* SMP variation */ -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 k0, CP0_TCBIND -#else - MFC0 k0, CP0_CONTEXT -#endif + CPU_ID_MFC0 k0, CPU_ID_REG #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) lui k1, %hi(kernelsp) #else @@ -107,11 +115,7 @@ .endm .macro set_saved_sp stackp temp temp2 -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 \temp, CP0_TCBIND -#else - MFC0 \temp, CP0_CONTEXT -#endif + CPU_ID_MFC0 \temp, CPU_ID_REG LONG_SRL \temp, PTEBASE_SHIFT LONG_S \stackp, kernelsp(\temp) .endm @@ -166,7 +170,6 @@ LONG_S $0, PT_R0(sp) mfc0 v1, CP0_STATUS LONG_S $2, PT_R2(sp) - LONG_S v1, PT_STATUS(sp) #ifdef CONFIG_MIPS_MT_SMTC /* * Ideally, these instructions would be shuffled in @@ -178,20 +181,21 @@ LONG_S v1, PT_TCSTATUS(sp) #endif /* CONFIG_MIPS_MT_SMTC */ LONG_S $4, PT_R4(sp) - mfc0 v1, CP0_CAUSE LONG_S $5, PT_R5(sp) - LONG_S v1, PT_CAUSE(sp) + LONG_S v1, PT_STATUS(sp) + mfc0 v1, CP0_CAUSE LONG_S $6, PT_R6(sp) - MFC0 v1, CP0_EPC LONG_S $7, PT_R7(sp) + LONG_S v1, PT_CAUSE(sp) + MFC0 v1, CP0_EPC #ifdef CONFIG_64BIT LONG_S $8, PT_R8(sp) LONG_S $9, PT_R9(sp) #endif - LONG_S v1, PT_EPC(sp) LONG_S $25, PT_R25(sp) LONG_S $28, PT_R28(sp) LONG_S $31, PT_R31(sp) + LONG_S v1, PT_EPC(sp) ori $28, sp, _THREAD_MASK xori $28, _THREAD_MASK #ifdef CONFIG_CPU_CAVIUM_OCTEON diff --git a/trunk/arch/mips/kernel/Makefile b/trunk/arch/mips/kernel/Makefile index eecd2a9f155c..9326af5186fe 100644 --- a/trunk/arch/mips/kernel/Makefile +++ b/trunk/arch/mips/kernel/Makefile @@ -2,14 +2,17 @@ # Makefile for the Linux/MIPS kernel. # -CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) - extra-y := head.o init_task.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o watch.o +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_early_printk.o = -pg +endif + obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K_LIB) += cevt-r4k.o obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o @@ -19,6 +22,7 @@ obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o +obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o obj-$(CONFIG_CSRC_R4K_LIB) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o @@ -26,6 +30,8 @@ obj-$(CONFIG_SYNC_R4K) += sync-r4k.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o +obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o + obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o @@ -92,4 +98,8 @@ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o +obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/ + EXTRA_CFLAGS += -Werror + +CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) diff --git a/trunk/arch/mips/kernel/cpu-probe.c b/trunk/arch/mips/kernel/cpu-probe.c index 7a51866068a4..80e202eca056 100644 --- a/trunk/arch/mips/kernel/cpu-probe.c +++ b/trunk/arch/mips/kernel/cpu-probe.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -32,6 +33,7 @@ * the CPU very much. */ void (*cpu_wait)(void); +EXPORT_SYMBOL(cpu_wait); static void r3081_wait(void) { diff --git a/trunk/arch/mips/kernel/cpufreq/Kconfig b/trunk/arch/mips/kernel/cpufreq/Kconfig new file mode 100644 index 000000000000..58c601eee6fd --- /dev/null +++ b/trunk/arch/mips/kernel/cpufreq/Kconfig @@ -0,0 +1,41 @@ +# +# CPU Frequency scaling +# + +config MIPS_EXTERNAL_TIMER + bool + +config MIPS_CPUFREQ + bool + default y + depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER + +if MIPS_CPUFREQ + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +config LOONGSON2_CPUFREQ + tristate "Loongson2 CPUFreq Driver" + select CPU_FREQ_TABLE + depends on MIPS_CPUFREQ + help + This option adds a CPUFreq driver for loongson processors which + support software configurable cpu frequency. + + Loongson2F and it's successors support this feature. + + For details, take a look at . + + If in doubt, say N. + +endif # CPU_FREQ + +endmenu + +endif # MIPS_CPUFREQ diff --git a/trunk/arch/mips/kernel/cpufreq/Makefile b/trunk/arch/mips/kernel/cpufreq/Makefile new file mode 100644 index 000000000000..c3479a432efe --- /dev/null +++ b/trunk/arch/mips/kernel/cpufreq/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Linux/MIPS cpufreq. +# + +obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o loongson2_clock.o diff --git a/trunk/arch/mips/kernel/cpufreq/loongson2_clock.c b/trunk/arch/mips/kernel/cpufreq/loongson2_clock.c new file mode 100644 index 000000000000..d7ca256e33ef --- /dev/null +++ b/trunk/arch/mips/kernel/cpufreq/loongson2_clock.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include + +#include + +#include + +static LIST_HEAD(clock_list); +static DEFINE_SPINLOCK(clock_lock); +static DEFINE_MUTEX(clock_list_sem); + +/* Minimum CLK support */ +enum { + DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, + DC_87PT, DC_DISABLE, DC_RESV +}; + +struct cpufreq_frequency_table loongson2_clockmod_table[] = { + {DC_RESV, CPUFREQ_ENTRY_INVALID}, + {DC_ZERO, CPUFREQ_ENTRY_INVALID}, + {DC_25PT, 0}, + {DC_37PT, 0}, + {DC_50PT, 0}, + {DC_62PT, 0}, + {DC_75PT, 0}, + {DC_87PT, 0}, + {DC_DISABLE, 0}, + {DC_RESV, CPUFREQ_TABLE_END}, +}; +EXPORT_SYMBOL_GPL(loongson2_clockmod_table); + +static struct clk cpu_clk = { + .name = "cpu_clk", + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, + .rate = 800000000, +}; + +struct clk *clk_get(struct device *dev, const char *id) +{ + return &cpu_clk; +} +EXPORT_SYMBOL(clk_get); + +static void propagate_rate(struct clk *clk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clock_list, node) { + if (likely(clkp->parent != clk)) + continue; + if (likely(clkp->ops && clkp->ops->recalc)) + clkp->ops->recalc(clkp); + if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clkp); + } +} + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return clk_set_rate_ex(clk, rate, 0); +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) +{ + int ret = 0; + int regval; + int i; + + if (likely(clk->ops && clk->ops->set_rate)) { + unsigned long flags; + + spin_lock_irqsave(&clock_lock, flags); + ret = clk->ops->set_rate(clk, rate, algo_id); + spin_unlock_irqrestore(&clock_lock, flags); + } + + if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clk); + + for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END; + i++) { + if (loongson2_clockmod_table[i].frequency == + CPUFREQ_ENTRY_INVALID) + continue; + if (rate == loongson2_clockmod_table[i].frequency) + break; + } + if (rate != loongson2_clockmod_table[i].frequency) + return -ENOTSUPP; + + clk->rate = rate; + + regval = LOONGSON_CHIPCFG0; + regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1); + LOONGSON_CHIPCFG0 = regval; + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate_ex); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (likely(clk->ops && clk->ops->round_rate)) { + unsigned long flags, rounded; + + spin_lock_irqsave(&clock_lock, flags); + rounded = clk->ops->round_rate(clk, rate); + spin_unlock_irqrestore(&clock_lock, flags); + + return rounded; + } + + return rate; +} +EXPORT_SYMBOL_GPL(clk_round_rate); + +/* + * This is the simple version of Loongson-2 wait, Maybe we need do this in + * interrupt disabled content + */ + +DEFINE_SPINLOCK(loongson2_wait_lock); +void loongson2_cpu_wait(void) +{ + u32 cpu_freq; + unsigned long flags; + + spin_lock_irqsave(&loongson2_wait_lock, flags); + cpu_freq = LOONGSON_CHIPCFG0; + LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ + spin_unlock_irqrestore(&loongson2_wait_lock, flags); +} +EXPORT_SYMBOL_GPL(loongson2_cpu_wait); diff --git a/trunk/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/trunk/arch/mips/kernel/cpufreq/loongson2_cpufreq.c new file mode 100644 index 000000000000..2f6a0b147ab8 --- /dev/null +++ b/trunk/arch/mips/kernel/cpufreq/loongson2_cpufreq.c @@ -0,0 +1,227 @@ +/* + * Cpufreq driver for the loongson-2 processors + * + * The 2E revision of loongson processor not support this feature. + * + * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include /* set_cpus_allowed() */ +#include +#include + +#include + +#include + +static uint nowait; + +static struct clk *cpuclk; + +static void (*saved_cpu_wait) (void); + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data); + +static struct notifier_block loongson2_cpufreq_notifier_block = { + .notifier_call = loongson2_cpu_freq_notifier +}; + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return 0; +} + +static unsigned int loongson2_cpufreq_get(unsigned int cpu) +{ + return clk_get_rate(cpuclk); +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int loongson2_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int cpu = policy->cpu; + unsigned int newstate = 0; + cpumask_t cpus_allowed; + struct cpufreq_freqs freqs; + unsigned int freq; + + if (!cpu_online(cpu)) + return -ENODEV; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + if (cpufreq_frequency_table_target + (policy, &loongson2_clockmod_table[0], target_freq, relation, + &newstate)) + return -EINVAL; + + freq = + ((cpu_clock_freq / 1000) * + loongson2_clockmod_table[newstate].index) / 8; + if (freq < policy->min || freq > policy->max) + return -EINVAL; + + pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000); + + freqs.cpu = cpu; + freqs.old = loongson2_cpufreq_get(cpu); + freqs.new = freq; + freqs.flags = 0; + + if (freqs.new == freqs.old) + return 0; + + /* notifiers */ + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + set_cpus_allowed(current, cpus_allowed); + + /* setting the cpu frequency */ + clk_set_rate(cpuclk, freq); + + /* notifiers */ + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + pr_debug("cpufreq: set frequency %u kHz\n", freq); + + return 0; +} + +static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int i; + + if (!cpu_online(policy->cpu)) + return -ENODEV; + + cpuclk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(cpuclk)) { + printk(KERN_ERR "cpufreq: couldn't get CPU clk\n"); + return PTR_ERR(cpuclk); + } + + cpuclk->rate = cpu_clock_freq / 1000; + if (!cpuclk->rate) + return -EINVAL; + + /* clock table init */ + for (i = 2; + (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END); + i++) + loongson2_clockmod_table[i].frequency = (cpuclk->rate * i) / 8; + + policy->cur = loongson2_cpufreq_get(policy->cpu); + + cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0], + policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + &loongson2_clockmod_table[0]); +} + +static int loongson2_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &loongson2_clockmod_table[0]); +} + +static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) +{ + clk_put(cpuclk); + return 0; +} + +static struct freq_attr *loongson2_table_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver loongson2_cpufreq_driver = { + .owner = THIS_MODULE, + .name = "loongson2", + .init = loongson2_cpufreq_cpu_init, + .verify = loongson2_cpufreq_verify, + .target = loongson2_cpufreq_target, + .get = loongson2_cpufreq_get, + .exit = loongson2_cpufreq_exit, + .attr = loongson2_table_attr, +}; + +static struct platform_device_id platform_device_ids[] = { + { + .name = "loongson2_cpufreq", + }, + {} +}; + +MODULE_DEVICE_TABLE(platform, platform_device_ids); + +static struct platform_driver platform_driver = { + .driver = { + .name = "loongson2_cpufreq", + .owner = THIS_MODULE, + }, + .id_table = platform_device_ids, +}; + +static int __init cpufreq_init(void) +{ + int ret; + + /* Register platform stuff */ + ret = platform_driver_register(&platform_driver); + if (ret) + return ret; + + pr_info("cpufreq: Loongson-2F CPU frequency driver.\n"); + + cpufreq_register_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + ret = cpufreq_register_driver(&loongson2_cpufreq_driver); + + if (!ret && !nowait) { + saved_cpu_wait = cpu_wait; + cpu_wait = loongson2_cpu_wait; + } + + return ret; +} + +static void __exit cpufreq_exit(void) +{ + if (!nowait && saved_cpu_wait) + cpu_wait = saved_cpu_wait; + cpufreq_unregister_driver(&loongson2_cpufreq_driver); + cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + platform_driver_unregister(&platform_driver); +} + +module_init(cpufreq_init); +module_exit(cpufreq_exit); + +module_param(nowait, uint, 0644); +MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait"); + +MODULE_AUTHOR("Yanhua "); +MODULE_DESCRIPTION("cpufreq driver for Loongson2F"); +MODULE_LICENSE("GPL"); diff --git a/trunk/arch/mips/kernel/csrc-powertv.c b/trunk/arch/mips/kernel/csrc-powertv.c new file mode 100644 index 000000000000..a27c16c8690e --- /dev/null +++ b/trunk/arch/mips/kernel/csrc-powertv.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2008 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * The file comes from kernel/csrc-r4k.c + */ +#include +#include + +#include /* Not included in linux/time.h */ + +#include +#include "powertv-clock.h" + +/* MIPS PLL Register Definitions */ +#define PLL_GET_M(x) (((x) >> 8) & 0x000000FF) +#define PLL_GET_N(x) (((x) >> 16) & 0x000000FF) +#define PLL_GET_P(x) (((x) >> 24) & 0x00000007) + +/* + * returns: Clock frequency in kHz + */ +unsigned int __init mips_get_pll_freq(void) +{ + unsigned int pll_reg, m, n, p; + unsigned int fin = 54000; /* Base frequency in kHz */ + unsigned int fout; + + /* Read PLL register setting */ + pll_reg = asic_read(mips_pll_setup); + m = PLL_GET_M(pll_reg); + n = PLL_GET_N(pll_reg); + p = PLL_GET_P(pll_reg); + pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p); + + /* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */ + fout = ((2 * n * fin) / (m * (0x01 << p))); + + pr_info("MIPS Clock Freq=%d kHz\n", fout); + + return fout; +} + +static cycle_t c0_hpt_read(struct clocksource *cs) +{ + return read_c0_count(); +} + +static struct clocksource clocksource_mips = { + .name = "powertv-counter", + .read = c0_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init powertv_c0_hpt_clocksource_init(void) +{ + unsigned int pll_freq = mips_get_pll_freq(); + + pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000, + (pll_freq % 1000) * 100 / 1000); + + mips_hpt_frequency = pll_freq / 2 * 1000; + + clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + + clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); + + clocksource_register(&clocksource_mips); +} + +/** + * struct tim_c - free running counter + * @hi: High 16 bits of the counter + * @lo: Low 32 bits of the counter + * + * Lays out the structure of the free running counter in memory. This counter + * increments at a rate of 27 MHz/8 on all platforms. + */ +struct tim_c { + unsigned int hi; + unsigned int lo; +}; + +static struct tim_c *tim_c; + +static cycle_t tim_c_read(struct clocksource *cs) +{ + unsigned int hi; + unsigned int next_hi; + unsigned int lo; + + hi = readl(&tim_c->hi); + + for (;;) { + lo = readl(&tim_c->lo); + next_hi = readl(&tim_c->hi); + if (next_hi == hi) + break; + hi = next_hi; + } + +pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo); + return ((u64) hi << 32) | lo; +} + +#define TIM_C_SIZE 48 /* # bits in the timer */ + +static struct clocksource clocksource_tim_c = { + .name = "powertv-tim_c", + .read = tim_c_read, + .mask = CLOCKSOURCE_MASK(TIM_C_SIZE), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/** + * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock + * + * The hard part here is coming up with a constant k and shift s such that + * the 48-bit TIM_C value multiplied by k doesn't overflow and that value, + * when shifted right by s, yields the corresponding number of nanoseconds. + * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to + * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the + * number of nanoseconds. Since the TIM_C value has 48 bits and the math is + * done in 64 bits, avoiding an overflow means that k must be less than + * 64 - 48 = 16 bits. + */ +static void __init powertv_tim_c_clocksource_init(void) +{ + int prescale; + unsigned long dividend; + unsigned long k; + int s; + const int max_k_bits = (64 - 48) - 1; + const unsigned long billion = 1000000000; + const unsigned long counts_per_second = 27000000 / 8; + + prescale = BITS_PER_LONG - ilog2(billion) - 1; + dividend = billion << prescale; + k = dividend / counts_per_second; + s = ilog2(k) - max_k_bits; + + if (s < 0) + s = prescale; + + else { + k >>= s; + s += prescale; + } + + clocksource_tim_c.mult = k; + clocksource_tim_c.shift = s; + clocksource_tim_c.rating = 200; + + clocksource_register(&clocksource_tim_c); + tim_c = (struct tim_c *) asic_reg_addr(tim_ch); +} + +/** + powertv_clocksource_init - initialize all clocksources + */ +void __init powertv_clocksource_init(void) +{ + powertv_c0_hpt_clocksource_init(); + powertv_tim_c_clocksource_init(); +} diff --git a/trunk/arch/mips/kernel/ftrace.c b/trunk/arch/mips/kernel/ftrace.c new file mode 100644 index 000000000000..68b067040d8b --- /dev/null +++ b/trunk/arch/mips/kernel/ftrace.c @@ -0,0 +1,275 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt + * Copyright (C) 2009 DSLab, Lanzhou University, China + * Author: Wu Zhangjin + * + * Thanks goes to Steven Rostedt for writing the original x86 version. + */ + +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_DYNAMIC_FTRACE + +#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ +#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */ +#define jump_insn_encode(op_code, addr) \ + ((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK))) + +static unsigned int ftrace_nop = 0x00000000; + +static int ftrace_modify_code(unsigned long ip, unsigned int new_code) +{ + int faulted; + + /* *(unsigned int *)ip = new_code; */ + safe_store_code(new_code, ip, faulted); + + if (unlikely(faulted)) + return -EFAULT; + + flush_icache_range(ip, ip + 8); + + return 0; +} + +static int lui_v1; +static int jal_mcount; + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + int faulted; + unsigned long ip = rec->ip; + + /* We have compiled module with -mlong-calls, but compiled the kernel + * without it, we need to cope with them respectively. */ + if (ip & 0x40000000) { + /* record it for ftrace_make_call */ + if (lui_v1 == 0) { + /* lui_v1 = *(unsigned int *)ip; */ + safe_load_code(lui_v1, ip, faulted); + + if (unlikely(faulted)) + return -EFAULT; + } + + /* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004) + * addiu v1, v1, low_16bit_of_mcount + * move at, ra + * jalr v1 + * nop + * 1f: (ip + 12) + */ + new = 0x10000004; + } else { + /* record/calculate it for ftrace_make_call */ + if (jal_mcount == 0) { + /* We can record it directly like this: + * jal_mcount = *(unsigned int *)ip; + * Herein, jump over the first two nop instructions */ + jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8)); + } + + /* move at, ra + * jalr v1 --> nop + */ + new = ftrace_nop; + } + return ftrace_modify_code(ip, new); +} + +static int modified; /* initialized as 0 by default */ + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + unsigned long ip = rec->ip; + + /* We just need to remove the "b ftrace_stub" at the fist time! */ + if (modified == 0) { + modified = 1; + ftrace_modify_code(addr, ftrace_nop); + } + /* ip, module: 0xc0000000, kernel: 0x80000000 */ + new = (ip & 0x40000000) ? lui_v1 : jal_mcount; + + return ftrace_modify_code(ip, new); +} + +#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call)) + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned int new; + + new = jump_insn_encode(JAL, (unsigned long)func); + + return ftrace_modify_code(FTRACE_CALL_IP, new); +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* The return code is retured via data */ + *(unsigned long *)data = 0; + + return 0; +} +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +#ifdef CONFIG_DYNAMIC_FTRACE + +extern void ftrace_graph_call(void); +#define JMP 0x08000000 /* jump to target directly */ +#define CALL_FTRACE_GRAPH_CALLER \ + jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller)) +#define FTRACE_GRAPH_CALL_IP ((unsigned long)(&ftrace_graph_call)) + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, + CALL_FTRACE_GRAPH_CALLER); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop); +} + +#endif /* !CONFIG_DYNAMIC_FTRACE */ + +#ifndef KBUILD_MCOUNT_RA_ADDRESS +#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ +#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ +#define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */ + +unsigned long ftrace_get_parent_addr(unsigned long self_addr, + unsigned long parent, + unsigned long parent_addr, + unsigned long fp) +{ + unsigned long sp, ip, ra; + unsigned int code; + int faulted; + + /* in module or kernel? */ + if (self_addr & 0x40000000) { + /* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */ + ip = self_addr - 20; + } else { + /* kernel: move to the instruction "move ra, at" */ + ip = self_addr - 12; + } + + /* search the text until finding the non-store instruction or "s{d,w} + * ra, offset(sp)" instruction */ + do { + ip -= 4; + + /* get the code at "ip": code = *(unsigned int *)ip; */ + safe_load_code(code, ip, faulted); + + if (unlikely(faulted)) + return 0; + + /* If we hit the non-store instruction before finding where the + * ra is stored, then this is a leaf function and it does not + * store the ra on the stack. */ + if ((code & S_R_SP) != S_R_SP) + return parent_addr; + + } while (((code & S_RA_SP) != S_RA_SP)); + + sp = fp + (code & OFFSET_MASK); + + /* ra = *(unsigned long *)sp; */ + safe_load_stack(ra, sp, faulted); + if (unlikely(faulted)) + return 0; + + if (ra == parent) + return sp; + return 0; +} + +#endif + +/* + * Hook the return address and push it in the stack of return addrs + * in current thread info. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long fp) +{ + unsigned long old; + struct ftrace_graph_ent trace; + unsigned long return_hooker = (unsigned long) + &return_to_handler; + int faulted; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* "parent" is the stack address saved the return address of the caller + * of _mcount. + * + * if the gcc < 4.5, a leaf function does not save the return address + * in the stack address, so, we "emulate" one in _mcount's stack space, + * and hijack it directly, but for a non-leaf function, it save the + * return address to the its own stack space, we can not hijack it + * directly, but need to find the real stack address, + * ftrace_get_parent_addr() does it! + * + * if gcc>= 4.5, with the new -mmcount-ra-address option, for a + * non-leaf function, the location of the return address will be saved + * to $12 for us, and for a leaf function, only put a zero into $12. we + * do it in ftrace_graph_caller of mcount.S. + */ + + /* old = *parent; */ + safe_load_stack(old, parent, faulted); + if (unlikely(faulted)) + goto out; +#ifndef KBUILD_MCOUNT_RA_ADDRESS + parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old, + (unsigned long)parent, + fp); + /* If fails when getting the stack address of the non-leaf function's + * ra, stop function graph tracer and return */ + if (parent == 0) + goto out; +#endif + /* *parent = return_hooker; */ + safe_store_stack(return_hooker, parent, faulted); + if (unlikely(faulted)) + goto out; + + if (ftrace_push_return_trace(old, self_addr, &trace.depth, fp) == + -EBUSY) { + *parent = old; + return; + } + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + *parent = old; + } + return; +out: + ftrace_graph_stop(); + WARN_ON(1); +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/trunk/arch/mips/kernel/irq.c b/trunk/arch/mips/kernel/irq.c index 8b0b4181219f..981f86c26168 100644 --- a/trunk/arch/mips/kernel/irq.c +++ b/trunk/arch/mips/kernel/irq.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -150,3 +151,32 @@ void __init init_IRQ(void) kgdb_early_setup = 1; #endif } + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +void __irq_entry do_IRQ(unsigned int irq) +{ + irq_enter(); + __DO_IRQ_SMTC_HOOK(irq); + generic_handle_irq(irq); + irq_exit(); +} + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +/* + * To avoid inefficient and in some cases pathological re-checking of + * IRQ affinity, we have this variant that skips the affinity check. + */ + +void __irq_entry do_IRQ_no_affinity(unsigned int irq) +{ + irq_enter(); + __NO_AFFINITY_IRQ_SMTC_HOOK(irq); + generic_handle_irq(irq); + irq_exit(); +} + +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/trunk/arch/mips/kernel/mcount.S b/trunk/arch/mips/kernel/mcount.S new file mode 100644 index 000000000000..0a9cfdb271dd --- /dev/null +++ b/trunk/arch/mips/kernel/mcount.S @@ -0,0 +1,189 @@ +/* + * MIPS specific _mcount support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + * + * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China + * Author: Wu Zhangjin + */ + +#include +#include +#include + + .text + .set noreorder + .set noat + + .macro MCOUNT_SAVE_REGS + PTR_SUBU sp, PT_SIZE + PTR_S ra, PT_R31(sp) + PTR_S AT, PT_R1(sp) + PTR_S a0, PT_R4(sp) + PTR_S a1, PT_R5(sp) + PTR_S a2, PT_R6(sp) + PTR_S a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_S a4, PT_R8(sp) + PTR_S a5, PT_R9(sp) + PTR_S a6, PT_R10(sp) + PTR_S a7, PT_R11(sp) +#endif + .endm + + .macro MCOUNT_RESTORE_REGS + PTR_L ra, PT_R31(sp) + PTR_L AT, PT_R1(sp) + PTR_L a0, PT_R4(sp) + PTR_L a1, PT_R5(sp) + PTR_L a2, PT_R6(sp) + PTR_L a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_L a4, PT_R8(sp) + PTR_L a5, PT_R9(sp) + PTR_L a6, PT_R10(sp) + PTR_L a7, PT_R11(sp) +#endif +#ifdef CONFIG_64BIT + PTR_ADDIU sp, PT_SIZE +#else + PTR_ADDIU sp, (PT_SIZE + 8) +#endif +.endm + + .macro RETURN_BACK + jr ra + move ra, AT + .endm + +#ifdef CONFIG_DYNAMIC_FTRACE + +NESTED(ftrace_caller, PT_SIZE, ra) + .globl _mcount +_mcount: + b ftrace_stub + nop + lw t1, function_trace_stop + bnez t1, ftrace_stub + nop + + MCOUNT_SAVE_REGS +#ifdef KBUILD_MCOUNT_RA_ADDRESS + PTR_S t0, PT_R12(sp) /* t0 saved the location of the return address(at) by -mmcount-ra-address */ +#endif + + move a0, ra /* arg1: next ip, selfaddr */ + .globl ftrace_call +ftrace_call: + nop /* a placeholder for the call to a real tracing function */ + move a1, AT /* arg2: the caller's next ip, parent */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_call +ftrace_graph_call: + nop + nop +#endif + + MCOUNT_RESTORE_REGS + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + +NESTED(_mcount, PT_SIZE, ra) + lw t1, function_trace_stop + bnez t1, ftrace_stub + nop + PTR_LA t1, ftrace_stub + PTR_L t2, ftrace_trace_function /* Prepare t2 for (1) */ + bne t1, t2, static_trace + nop + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + PTR_L t3, ftrace_graph_return + bne t1, t3, ftrace_graph_caller + nop + PTR_LA t1, ftrace_graph_entry_stub + PTR_L t3, ftrace_graph_entry + bne t1, t3, ftrace_graph_caller + nop +#endif + b ftrace_stub + nop + +static_trace: + MCOUNT_SAVE_REGS + + move a0, ra /* arg1: next ip, selfaddr */ + jalr t2 /* (1) call *ftrace_trace_function */ + move a1, AT /* arg2: the caller's next ip, parent */ + + MCOUNT_RESTORE_REGS + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(_mcount) + +#endif /* ! CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +NESTED(ftrace_graph_caller, PT_SIZE, ra) +#ifdef CONFIG_DYNAMIC_FTRACE + PTR_L a1, PT_R31(sp) /* load the original ra from the stack */ +#ifdef KBUILD_MCOUNT_RA_ADDRESS + PTR_L t0, PT_R12(sp) /* load the original t0 from the stack */ +#endif +#else + MCOUNT_SAVE_REGS + move a1, ra /* arg2: next ip, selfaddr */ +#endif + +#ifdef KBUILD_MCOUNT_RA_ADDRESS + bnez t0, 1f /* non-leaf func: t0 saved the location of the return address */ + nop + PTR_LA t0, PT_R1(sp) /* leaf func: get the location of at(old ra) from our own stack */ +1: move a0, t0 /* arg1: the location of the return address */ +#else + PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */ +#endif + jal prepare_ftrace_return +#ifdef CONFIG_FRAME_POINTER + move a2, fp /* arg3: frame pointer */ +#else +#ifdef CONFIG_64BIT + PTR_LA a2, PT_SIZE(sp) +#else + PTR_LA a2, (PT_SIZE+8)(sp) +#endif +#endif + + MCOUNT_RESTORE_REGS + RETURN_BACK + END(ftrace_graph_caller) + + .align 2 + .globl return_to_handler +return_to_handler: + PTR_SUBU sp, PT_SIZE + PTR_S v0, PT_R2(sp) + + jal ftrace_return_to_handler + PTR_S v1, PT_R3(sp) + + /* restore the real parent address: v0 -> ra */ + move ra, v0 + + PTR_L v0, PT_R2(sp) + PTR_L v1, PT_R3(sp) + jr ra + PTR_ADDIU sp, PT_SIZE +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + + .set at + .set reorder diff --git a/trunk/arch/mips/kernel/mips_ksyms.c b/trunk/arch/mips/kernel/mips_ksyms.c index 225755d0c1f6..1d04807874db 100644 --- a/trunk/arch/mips/kernel/mips_ksyms.c +++ b/trunk/arch/mips/kernel/mips_ksyms.c @@ -13,6 +13,7 @@ #include #include #include +#include extern void *__bzero(void *__s, size_t __count); extern long __strncpy_from_user_nocheck_asm(char *__to, @@ -51,3 +52,7 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck); EXPORT_SYMBOL(__csum_partial_copy_user); EXPORT_SYMBOL(invalid_pte_table); +#ifdef CONFIG_FUNCTION_TRACER +/* _mcount is defined in arch/mips/kernel/mcount.S */ +EXPORT_SYMBOL(_mcount); +#endif diff --git a/trunk/arch/mips/kernel/setup.c b/trunk/arch/mips/kernel/setup.c index 2b290d70083e..f9513f9e61d3 100644 --- a/trunk/arch/mips/kernel/setup.c +++ b/trunk/arch/mips/kernel/setup.c @@ -58,8 +58,12 @@ EXPORT_SYMBOL(mips_machtype); struct boot_mem_map boot_mem_map; -static char command_line[CL_SIZE]; - char arcs_cmdline[CL_SIZE]=CONFIG_CMDLINE; +static char __initdata command_line[COMMAND_LINE_SIZE]; +char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; + +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif /* * mips_io_port_base is the begin of the address space to which x86 style @@ -166,26 +170,8 @@ static unsigned long __init init_initrd(void) * already set up initrd_start and initrd_end. In these cases * perfom sanity checks and use them if all looks good. */ - if (!initrd_start || initrd_end <= initrd_start) { -#ifdef CONFIG_PROBE_INITRD_HEADER - u32 *initrd_header; - - /* - * See if initrd has been added to the kernel image by - * arch/mips/boot/addinitrd.c. In that case a header is - * prepended to initrd and is made up by 8 bytes. The first - * word is a magic number and the second one is the size of - * initrd. Initrd start must be page aligned in any cases. - */ - initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8; - if (initrd_header[0] != 0x494E5244) - goto disable; - initrd_start = (unsigned long)(initrd_header + 2); - initrd_end = initrd_start + initrd_header[1]; -#else + if (!initrd_start || initrd_end <= initrd_start) goto disable; -#endif - } if (initrd_start & ~PAGE_MASK) { pr_err("initrd start must be page aligned\n"); @@ -476,8 +462,20 @@ static void __init arch_mem_init(char **cmdline_p) pr_info("Determined physical RAM map:\n"); print_memory_map(); - strlcpy(command_line, arcs_cmdline, sizeof(command_line)); - strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + if (builtin_cmdline[0]) { + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE); + } + strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +#endif +#else + strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +#endif + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; diff --git a/trunk/arch/mips/kernel/signal.c b/trunk/arch/mips/kernel/signal.c index 6254041b942f..d0c68b5d717b 100644 --- a/trunk/arch/mips/kernel/signal.c +++ b/trunk/arch/mips/kernel/signal.c @@ -35,6 +35,15 @@ #include "signal-common.h" +static int (*save_fp_context)(struct sigcontext __user *sc); +static int (*restore_fp_context)(struct sigcontext __user *sc); + +extern asmlinkage int _save_fp_context(struct sigcontext __user *sc); +extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc); + +extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc); +extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc); + /* * Horribly complicated - with the bloody RM9000 workarounds enabled * the signal trampolines is moving to the end of the structure so we can @@ -709,3 +718,40 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, key_replace_session_keyring(); } } + +#ifdef CONFIG_SMP +static int smp_save_fp_context(struct sigcontext __user *sc) +{ + return raw_cpu_has_fpu + ? _save_fp_context(sc) + : fpu_emulator_save_context(sc); +} + +static int smp_restore_fp_context(struct sigcontext __user *sc) +{ + return raw_cpu_has_fpu + ? _restore_fp_context(sc) + : fpu_emulator_restore_context(sc); +} +#endif + +static int signal_setup(void) +{ +#ifdef CONFIG_SMP + /* For now just do the cpu_has_fpu check when the functions are invoked */ + save_fp_context = smp_save_fp_context; + restore_fp_context = smp_restore_fp_context; +#else + if (cpu_has_fpu) { + save_fp_context = _save_fp_context; + restore_fp_context = _restore_fp_context; + } else { + save_fp_context = fpu_emulator_save_context; + restore_fp_context = fpu_emulator_restore_context; + } +#endif + + return 0; +} + +arch_initcall(signal_setup); diff --git a/trunk/arch/mips/kernel/signal32.c b/trunk/arch/mips/kernel/signal32.c index 2e74075ac0ca..03abaf048f09 100644 --- a/trunk/arch/mips/kernel/signal32.c +++ b/trunk/arch/mips/kernel/signal32.c @@ -35,6 +35,15 @@ #include "signal-common.h" +static int (*save_fp_context32)(struct sigcontext32 __user *sc); +static int (*restore_fp_context32)(struct sigcontext32 __user *sc); + +extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc); +extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc); + +extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc); +extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc); + /* * Including would give use the 64-bit syscall numbers ... */ @@ -828,3 +837,18 @@ SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid, info.si_code |= __SI_CHLD; return copy_siginfo_to_user32(uinfo, &info); } + +static int signal32_init(void) +{ + if (cpu_has_fpu) { + save_fp_context32 = _save_fp_context32; + restore_fp_context32 = _restore_fp_context32; + } else { + save_fp_context32 = fpu_emulator_save_context32; + restore_fp_context32 = fpu_emulator_restore_context32; + } + + return 0; +} + +arch_initcall(signal32_init); diff --git a/trunk/arch/mips/kernel/smp.c b/trunk/arch/mips/kernel/smp.c index e72e6844d134..6cdca1956b77 100644 --- a/trunk/arch/mips/kernel/smp.c +++ b/trunk/arch/mips/kernel/smp.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -130,7 +131,7 @@ asmlinkage __cpuinit void start_secondary(void) /* * Call into both interrupt handlers, as we share the IPI for them */ -void smp_call_function_interrupt(void) +void __irq_entry smp_call_function_interrupt(void) { irq_enter(); generic_smp_call_function_single_interrupt(); diff --git a/trunk/arch/mips/kernel/smtc.c b/trunk/arch/mips/kernel/smtc.c index a38e3ee95515..23499b5bd9c3 100644 --- a/trunk/arch/mips/kernel/smtc.c +++ b/trunk/arch/mips/kernel/smtc.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -939,23 +940,29 @@ static void ipi_call_interrupt(void) DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); -void ipi_decode(struct smtc_ipi *pipi) +static void __irq_entry smtc_clock_tick_interrupt(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *cd; + int irq = MIPS_CPU_IRQ_BASE + 1; + + irq_enter(); + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + irq_exit(); +} + +void ipi_decode(struct smtc_ipi *pipi) +{ void *arg_copy = pipi->arg; int type_copy = pipi->type; - int irq = MIPS_CPU_IRQ_BASE + 1; smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: - irq_enter(); - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); - cd = &per_cpu(mips_clockevent_device, cpu); - cd->event_handler(cd); - irq_exit(); + smtc_clock_tick_interrupt(); break; case LINUX_SMP_IPI: diff --git a/trunk/arch/mips/kernel/traps.c b/trunk/arch/mips/kernel/traps.c index 0a18b4c62afb..308e43460864 100644 --- a/trunk/arch/mips/kernel/traps.c +++ b/trunk/arch/mips/kernel/traps.c @@ -25,10 +25,12 @@ #include #include #include +#include #include #include #include +#include #include #include #include @@ -79,10 +81,6 @@ extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu); -#ifdef CONFIG_CPU_CAVIUM_OCTEON -extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task); -#endif - void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); @@ -857,6 +855,44 @@ static void mt_ase_fp_affinity(void) #endif /* CONFIG_MIPS_MT_FPAFF */ } +/* + * No lock; only written during early bootup by CPU 0. + */ +static RAW_NOTIFIER_HEAD(cu2_chain); + +int __ref register_cu2_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&cu2_chain, nb); +} + +int cu2_notifier_call_chain(unsigned long val, void *v) +{ + return raw_notifier_call_chain(&cu2_chain, val, v); +} + +static int default_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + struct pt_regs *regs = data; + + switch (action) { + default: + die_if_kernel("Unhandled kernel unaligned access or invalid " + "instruction", regs); + /* Fall through */ + + case CU2_EXCEPTION: + force_sig(SIGILL, current); + } + + return NOTIFY_OK; +} + +static struct notifier_block default_cu2_notifier = { + .notifier_call = default_cu2_call, + .priority = 0x80000000, /* Run last */ +}; + asmlinkage void do_cpu(struct pt_regs *regs) { unsigned int __user *epc; @@ -920,17 +956,9 @@ asmlinkage void do_cpu(struct pt_regs *regs) return; case 2: -#ifdef CONFIG_CPU_CAVIUM_OCTEON - prefetch(¤t->thread.cp2); - local_irq_save(flags); - KSTK_STATUS(current) |= ST0_CU2; - status = read_c0_status(); - write_c0_status(status | ST0_CU2); - octeon_cop2_restore(&(current->thread.cp2)); - write_c0_status(status & ~ST0_CU2); - local_irq_restore(flags); - return; -#endif + raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs); + break; + case 3: break; } @@ -1367,77 +1395,6 @@ void *set_vi_handler(int n, vi_handler_t addr) return set_vi_srs_handler(n, addr, 0); } -/* - * This is used by native signal handling - */ -asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); -asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); - -extern asmlinkage int _save_fp_context(struct sigcontext __user *sc); -extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc); - -extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc); -extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc); - -#ifdef CONFIG_SMP -static int smp_save_fp_context(struct sigcontext __user *sc) -{ - return raw_cpu_has_fpu - ? _save_fp_context(sc) - : fpu_emulator_save_context(sc); -} - -static int smp_restore_fp_context(struct sigcontext __user *sc) -{ - return raw_cpu_has_fpu - ? _restore_fp_context(sc) - : fpu_emulator_restore_context(sc); -} -#endif - -static inline void signal_init(void) -{ -#ifdef CONFIG_SMP - /* For now just do the cpu_has_fpu check when the functions are invoked */ - save_fp_context = smp_save_fp_context; - restore_fp_context = smp_restore_fp_context; -#else - if (cpu_has_fpu) { - save_fp_context = _save_fp_context; - restore_fp_context = _restore_fp_context; - } else { - save_fp_context = fpu_emulator_save_context; - restore_fp_context = fpu_emulator_restore_context; - } -#endif -} - -#ifdef CONFIG_MIPS32_COMPAT - -/* - * This is used by 32-bit signal stuff on the 64-bit kernel - */ -asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); -asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); - -extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc); -extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc); - -extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc); -extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc); - -static inline void signal32_init(void) -{ - if (cpu_has_fpu) { - save_fp_context32 = _save_fp_context32; - restore_fp_context32 = _restore_fp_context32; - } else { - save_fp_context32 = fpu_emulator_save_context32; - restore_fp_context32 = fpu_emulator_restore_context32; - } -} -#endif - extern void cpu_cache_init(void); extern void tlb_init(void); extern void flush_tlb_handlers(void); @@ -1751,13 +1708,10 @@ void __init trap_init(void) else memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80); - signal_init(); -#ifdef CONFIG_MIPS32_COMPAT - signal32_init(); -#endif - local_flush_icache_range(ebase, ebase + 0x400); flush_tlb_handlers(); sort_extable(__start___dbe_table, __stop___dbe_table); + + register_cu2_notifier(&default_cu2_notifier); } diff --git a/trunk/arch/mips/kernel/unaligned.c b/trunk/arch/mips/kernel/unaligned.c index 67bd626942ab..69b039ca8d83 100644 --- a/trunk/arch/mips/kernel/unaligned.c +++ b/trunk/arch/mips/kernel/unaligned.c @@ -81,6 +81,7 @@ #include #include #include +#include #include #include #include @@ -451,17 +452,27 @@ static void emulate_load_store_insn(struct pt_regs *regs, */ goto sigbus; + /* + * COP2 is available to implementor for application specific use. + * It's up to applications to register a notifier chain and do + * whatever they have to do, including possible sending of signals. + */ case lwc2_op: + cu2_notifier_call_chain(CU2_LWC2_OP, regs); + break; + case ldc2_op: + cu2_notifier_call_chain(CU2_LDC2_OP, regs); + break; + case swc2_op: + cu2_notifier_call_chain(CU2_SWC2_OP, regs); + break; + case sdc2_op: - /* - * These are the coprocessor 2 load/stores. The current - * implementations don't use cp2 and cp2 should always be - * disabled in c0_status. So send SIGILL. - * (No longer true: The Sony Praystation uses cp2 for - * 3D matrix operations. Dunno if that thingy has a MMU ...) - */ + cu2_notifier_call_chain(CU2_SDC2_OP, regs); + break; + default: /* * Pheeee... We encountered an yet unknown instruction or diff --git a/trunk/arch/mips/kernel/vmlinux.lds.S b/trunk/arch/mips/kernel/vmlinux.lds.S index 162b29954baa..f25df73db923 100644 --- a/trunk/arch/mips/kernel/vmlinux.lds.S +++ b/trunk/arch/mips/kernel/vmlinux.lds.S @@ -46,6 +46,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + IRQENTRY_TEXT *(.text.*) *(.fixup) *(.gnu.warning) diff --git a/trunk/arch/mips/lasat/picvue_proc.c b/trunk/arch/mips/lasat/picvue_proc.c index 0bb6037afba3..8e388da1926f 100644 --- a/trunk/arch/mips/lasat/picvue_proc.c +++ b/trunk/arch/mips/lasat/picvue_proc.c @@ -4,12 +4,14 @@ * Brian Murphy * */ +#include #include #include #include #include #include +#include #include #include @@ -38,12 +40,9 @@ static void pvc_display(unsigned long data) static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0); -static int pvc_proc_read_line(char *page, char **start, - off_t off, int count, - int *eof, void *data) +static int pvc_line_proc_show(struct seq_file *m, void *v) { - char *origpage = page; - int lineno = *(int *)data; + int lineno = *(int *)m->private; if (lineno < 0 || lineno > PVC_NLINES) { printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno); @@ -51,45 +50,66 @@ static int pvc_proc_read_line(char *page, char **start, } mutex_lock(&pvc_mutex); - page += sprintf(page, "%s\n", pvc_lines[lineno]); + seq_printf(m, "%s\n", pvc_lines[lineno]); mutex_unlock(&pvc_mutex); - return page - origpage; + return 0; } -static int pvc_proc_write_line(struct file *file, const char *buffer, - unsigned long count, void *data) +static int pvc_line_proc_open(struct inode *inode, struct file *file) { - int origcount = count; - int lineno = *(int *)data; + return single_open(file, pvc_line_proc_show, PDE(inode)->data); +} - if (lineno < 0 || lineno > PVC_NLINES) { - printk(KERN_WARNING "proc_write_line: invalid lineno %d\n", - lineno); - return origcount; - } +static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) +{ + int lineno = *(int *)PDE(file->f_path.dentry->d_inode)->data; + char kbuf[PVC_LINELEN]; + size_t len; + + BUG_ON(lineno < 0 || lineno > PVC_NLINES); - if (count > PVC_LINELEN) - count = PVC_LINELEN; + len = min(count, sizeof(kbuf) - 1); + if (copy_from_user(kbuf, buf, len)) + return -EFAULT; + kbuf[len] = '\0'; - if (buffer[count-1] == '\n') - count--; + if (len > 0 && kbuf[len - 1] == '\n') + len--; mutex_lock(&pvc_mutex); - strncpy(pvc_lines[lineno], buffer, count); - pvc_lines[lineno][count] = '\0'; + strncpy(pvc_lines[lineno], kbuf, len); + pvc_lines[lineno][len] = '\0'; mutex_unlock(&pvc_mutex); tasklet_schedule(&pvc_display_tasklet); - return origcount; + return count; } -static int pvc_proc_write_scroll(struct file *file, const char *buffer, - unsigned long count, void *data) +static const struct file_operations pvc_line_proc_fops = { + .owner = THIS_MODULE, + .open = pvc_line_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = pvc_line_proc_write, +}; + +static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) { - int origcount = count; - int cmd = simple_strtol(buffer, NULL, 10); + char kbuf[42]; + size_t len; + int cmd; + + len = min(count, sizeof(kbuf) - 1); + if (copy_from_user(kbuf, buf, len)) + return -EFAULT; + kbuf[len] = '\0'; + + cmd = simple_strtol(kbuf, NULL, 10); mutex_lock(&pvc_mutex); if (scroll_interval != 0) @@ -110,22 +130,31 @@ static int pvc_proc_write_scroll(struct file *file, const char *buffer, } mutex_unlock(&pvc_mutex); - return origcount; + return count; } -static int pvc_proc_read_scroll(char *page, char **start, - off_t off, int count, - int *eof, void *data) +static int pvc_scroll_proc_show(struct seq_file *m, void *v) { - char *origpage = page; - mutex_lock(&pvc_mutex); - page += sprintf(page, "%d\n", scroll_dir * scroll_interval); + seq_printf(m, "%d\n", scroll_dir * scroll_interval); mutex_unlock(&pvc_mutex); - return page - origpage; + return 0; } +static int pvc_scroll_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, pvc_scroll_proc_show, NULL); +} + +static const struct file_operations pvc_scroll_proc_fops = { + .owner = THIS_MODULE, + .open = pvc_scroll_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = pvc_scroll_proc_write, +}; void pvc_proc_timerfunc(unsigned long data) { @@ -163,22 +192,16 @@ static int __init pvc_proc_init(void) pvc_linedata[i] = i; } for (i = 0; i < PVC_NLINES; i++) { - proc_entry = create_proc_entry(pvc_linename[i], 0644, - pvc_display_dir); + proc_entry = proc_create_data(pvc_linename[i], 0644, pvc_display_dir, + &pvc_line_proc_fops, &pvc_linedata[i]); if (proc_entry == NULL) goto error; - - proc_entry->read_proc = pvc_proc_read_line; - proc_entry->write_proc = pvc_proc_write_line; - proc_entry->data = &pvc_linedata[i]; } - proc_entry = create_proc_entry("scroll", 0644, pvc_display_dir); + proc_entry = proc_create("scroll", 0644, pvc_display_dir, + &pvc_scroll_proc_fops); if (proc_entry == NULL) goto error; - proc_entry->write_proc = pvc_proc_write_scroll; - proc_entry->read_proc = pvc_proc_read_scroll; - init_timer(&timer); timer.function = pvc_proc_timerfunc; diff --git a/trunk/arch/mips/lasat/prom.c b/trunk/arch/mips/lasat/prom.c index 6acc6cb85f0a..20fde19a5fbf 100644 --- a/trunk/arch/mips/lasat/prom.c +++ b/trunk/arch/mips/lasat/prom.c @@ -100,8 +100,8 @@ void __init prom_init(void) /* Get the command line */ if (argc > 0) { - strncpy(arcs_cmdline, argv[0], CL_SIZE-1); - arcs_cmdline[CL_SIZE-1] = '\0'; + strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1); + arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0'; } /* Set the I/O base address */ diff --git a/trunk/arch/mips/lasat/sysctl.c b/trunk/arch/mips/lasat/sysctl.c index 14b9a28a4aec..d87ffd04cb0a 100644 --- a/trunk/arch/mips/lasat/sysctl.c +++ b/trunk/arch/mips/lasat/sysctl.c @@ -204,7 +204,7 @@ static ctl_table lasat_table[] = { .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_lasat_prid, -. }, + }, #ifdef CONFIG_INET { .procname = "ipaddr", diff --git a/trunk/arch/mips/loongson/Kconfig b/trunk/arch/mips/loongson/Kconfig index d45092505fa1..3df1967dea08 100644 --- a/trunk/arch/mips/loongson/Kconfig +++ b/trunk/arch/mips/loongson/Kconfig @@ -1,31 +1,85 @@ choice - prompt "Machine Type" - depends on MACH_LOONGSON + prompt "Machine Type" + depends on MACH_LOONGSON config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HW_HAS_PCI - select I8259 - select ISA - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_HARDIRQS_NO__DO_IRQ - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2E + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + +config LEMOTE_MACH2F + bool "Lemote Loongson 2F family machines" + select ARCH_SPARSEMEM_ENABLE + select BOARD_SCACHE + select BOOT_ELF32 + select CEVT_R4K if ! MIPS_EXTERNAL_TIMER + select CPU_HAS_WB + select CS5536 + select CSRC_R4K if ! MIPS_EXTERNAL_TIMER + select DMA_NONCOHERENT + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select HW_HAS_PCI + select I8259 + select IRQ_CPU + select ISA + select SYS_HAS_CPU_LOONGSON2F + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + help + Lemote Loongson 2F family machines utilize the 2F revision of + Loongson processor and the AMD CS5536 south bridge. + + These family machines include fuloong2f mini PC, yeeloong2f notebook, + LingLoong allinone PC and so forth. endchoice + +config CS5536 + bool + +config CS5536_MFGPT + bool "CS5536 MFGPT Timer" + depends on CS5536 + select MIPS_EXTERNAL_TIMER + help + This option enables the mfgpt0 timer of AMD CS5536. + + If you want to enable the Loongson2 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + +config LOONGSON_SUSPEND + bool + default y + depends on CPU_SUPPORTS_CPUFREQ && SUSPEND + +config LOONGSON_UART_BASE + bool + default y + depends on EARLY_PRINTK || SERIAL_8250 diff --git a/trunk/arch/mips/loongson/Makefile b/trunk/arch/mips/loongson/Makefile index 39048c455d7d..2b76cb0fb07d 100644 --- a/trunk/arch/mips/loongson/Makefile +++ b/trunk/arch/mips/loongson/Makefile @@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON) += common/ # obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ + +# +# Lemote loongson2f family machines +# + +obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ diff --git a/trunk/arch/mips/loongson/common/Makefile b/trunk/arch/mips/loongson/common/Makefile index 656b3cc0a2a6..7668c4de1151 100644 --- a/trunk/arch/mips/loongson/common/Makefile +++ b/trunk/arch/mips/loongson/common/Makefile @@ -3,9 +3,23 @@ # obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - pci.o bonito-irq.o mem.o machtype.o + pci.o bonito-irq.o mem.o machtype.o platform.o # -# Early printk support +# Serial port support # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_SERIAL_8250) += serial.o +obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o + +# +# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure +# space +# +obj-$(CONFIG_CS5536) += cs5536/ + +# +# Suspend Support +# + +obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/trunk/arch/mips/loongson/common/bonito-irq.c b/trunk/arch/mips/loongson/common/bonito-irq.c index 3e31e7ad713e..2dc2a4cc632a 100644 --- a/trunk/arch/mips/loongson/common/bonito-irq.c +++ b/trunk/arch/mips/loongson/common/bonito-irq.c @@ -12,18 +12,19 @@ * option) any later version. */ #include +#include #include static inline void bonito_irq_enable(unsigned int irq) { - BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE)); + LOONGSON_INTENSET = (1 << (irq - LOONGSON_IRQ_BASE)); mmiowb(); } static inline void bonito_irq_disable(unsigned int irq) { - BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE)); + LOONGSON_INTENCLR = (1 << (irq - LOONGSON_IRQ_BASE)); mmiowb(); } @@ -35,7 +36,7 @@ static struct irq_chip bonito_irq_type = { .unmask = bonito_irq_enable, }; -static struct irqaction dma_timeout_irqaction = { +static struct irqaction __maybe_unused dma_timeout_irqaction = { .handler = no_action, .name = "dma_timeout", }; @@ -44,8 +45,10 @@ void bonito_irq_init(void) { u32 i; - for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) + for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq); - setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction); +#ifdef CONFIG_CPU_LOONGSON2E + setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); +#endif } diff --git a/trunk/arch/mips/loongson/common/cmdline.c b/trunk/arch/mips/loongson/common/cmdline.c index 75f1b243ee4e..7ad47f227477 100644 --- a/trunk/arch/mips/loongson/common/cmdline.c +++ b/trunk/arch/mips/loongson/common/cmdline.c @@ -9,7 +9,7 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -49,4 +49,6 @@ void __init prom_init_cmdline(void) strcat(arcs_cmdline, " console=ttyS0,115200"); if ((strstr(arcs_cmdline, "root=")) == NULL) strcat(arcs_cmdline, " root=/dev/hda1"); + + prom_init_machtype(); } diff --git a/trunk/arch/mips/loongson/common/cs5536/Makefile b/trunk/arch/mips/loongson/common/cs5536/Makefile new file mode 100644 index 000000000000..510d4cdc2378 --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for CS5536 support. +# + +obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ + cs5536_isa.o cs5536_ehci.o + +# +# Enable cs5536 mfgpt Timer +# +obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o + +EXTRA_CFLAGS += -Werror diff --git a/trunk/arch/mips/loongson/common/cs5536/cs5536_acc.c b/trunk/arch/mips/loongson/common/cs5536/cs5536_acc.c new file mode 100644 index 000000000000..b49485f187e0 --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/cs5536_acc.c @@ -0,0 +1,140 @@ +/* + * the ACC Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_acc_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 8); + else + lo &= ~(0x03 << 8); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + value &= 0xfffffffc; + hi = 0xA0000000 | ((value & 0x000ff000) >> 12); + lo = 0x000fff80 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); + } + break; + case PCI_ACC_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + /* disable all the usb interrupt in PIC */ + lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); + if (value) /* enable all the acc interrupt in PIC */ + lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_acc_read_reg(int reg) +{ + u32 hi, lo; + u32 conf_data = 0; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + if (((lo & 0xfff00000) || (hi & 0x000000ff)) + && ((hi & 0xf0000000) == 0xa0000000)) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x300) == 0x300) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ACC_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_ACC_FLAG) { + conf_data = CS5536_ACC_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + conf_data = (hi & 0x000000ff) << 12; + conf_data |= (lo & 0xfff00000) >> 20; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); + break; + default: + break; + } + + return conf_data; +} diff --git a/trunk/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/trunk/arch/mips/loongson/common/cs5536/cs5536_ehci.c new file mode 100644 index 000000000000..74f9c59d36af --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/cs5536_ehci.c @@ -0,0 +1,158 @@ +/* + * the EHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_ehci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); + } + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= 0x003f0000; + hi |= (value & 0x3f) << 16; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= ~0x00003f00; + hi |= value & 0x00003f00; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + default: + break; + } +} + +u32 pci_ehci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_EHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_EHCI_FLAG) { + conf_data = CS5536_EHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = lo & 0xfffff000; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x003f0000) >> 16; + break; + case PCI_EHCI_LEGSMISTS_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x3f000000) >> 24; + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = hi & 0x00003f00; + break; + default: + break; + } + + return conf_data; +} diff --git a/trunk/arch/mips/loongson/common/cs5536/cs5536_ide.c b/trunk/arch/mips/loongson/common/cs5536/cs5536_ide.c new file mode 100644 index 000000000000..3f61594b3884 --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/cs5536_ide.c @@ -0,0 +1,179 @@ +/* + * the IDE Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_ide_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 4); + else + lo &= ~(0x03 << 4); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR4_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + lo = (value & 0xfffffff0) | 0x1; + _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); + + value &= 0xfffffffc; + hi = 0x60000000 | ((value & 0x000ff000) >> 12); + lo = 0x000ffff0 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); + } + break; + case PCI_IDE_CFG_REG: + if (value == CS5536_IDE_FLASH_SIGNATURE) { + _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); + lo |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); + } else + _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); + break; + case PCI_IDE_DTC_REG: + _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); + break; + case PCI_IDE_CAST_REG: + _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); + break; + case PCI_IDE_ETC_REG: + _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); + break; + case PCI_IDE_PM_REG: + _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); + break; + default: + break; + } +} + +u32 pci_ide_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + if (lo & 0xfffffff0) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x30) == 0x30) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_IDE_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); + break; + case PCI_BAR4_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_IDE_FLAG) { + conf_data = CS5536_IDE_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + conf_data = lo & 0xfffffff0; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); + break; + case PCI_IDE_CFG_REG: + _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_DTC_REG: + _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_CAST_REG: + _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_ETC_REG: + _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); + conf_data = lo; + case PCI_IDE_PM_REG: + _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); + conf_data = lo; + break; + default: + break; + } + + return conf_data; +} diff --git a/trunk/arch/mips/loongson/common/cs5536/cs5536_isa.c b/trunk/arch/mips/loongson/common/cs5536/cs5536_isa.c new file mode 100644 index 000000000000..b6f17f538e48 --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/cs5536_isa.c @@ -0,0 +1,316 @@ +/* + * the ISA Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +/* common variables for PCI_ISA_READ/WRITE_BAR */ +static const u32 divil_msr_reg[6] = { + DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), + DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), + DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), +}; + +static const u32 soft_bar_flag[6] = { + SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, + SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, +}; + +static const u32 sb_msr_reg[6] = { + SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), + SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), +}; + +static const u32 bar_space_range[6] = { + CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, + CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, +}; + +static const int bar_space_len[6] = { + CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, + CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, +}; + +/* + * enable the divil module bar space. + * + * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg + * and the RCONFx(0~5) reg to use the modules. + */ +static void divil_lbar_enable(void) +{ + u32 hi, lo; + int offset; + + /* + * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. + */ + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo); + } +} + +/* + * disable the divil module bar space. + */ +static void divil_lbar_disable(void) +{ + u32 hi, lo; + int offset; + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi &= ~0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo); + } +} + +/* + * BAR write: write value to the n BAR + */ + +void pci_isa_write_bar(int n, u32 value) +{ + u32 hi = 0, lo = value; + + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + /* NATIVE reg */ + hi = 0x0000f001; + lo &= bar_space_range[n]; + _wrmsr(divil_msr_reg[n], hi, lo); + + /* RCONFx is 4bytes in units for I/O space */ + hi = ((value & 0x000ffffc) << 12) | + ((bar_space_len[n] - 4) << 12) | 0x01; + lo = ((value & 0x000ffffc) << 12) | 0x01; + _wrmsr(sb_msr_reg[n], hi, lo); + } +} + +/* + * BAR read: read the n BAR + */ + +u32 pci_isa_read_bar(int n) +{ + u32 conf_data = 0; + u32 hi, lo; + + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & soft_bar_flag[n]) { + conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(divil_msr_reg[n], &hi, &lo); + conf_data = lo & bar_space_range[n]; + conf_data |= 0x01; + conf_data &= ~0x02; + } + return conf_data; +} + +/* + * isa_write: ISA write transfer + * + * We assume that this is not a bus master transfer. + */ +void pci_isa_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + u32 temp; + + switch (reg) { + case PCI_COMMAND: + if (value & PCI_COMMAND_IO) + divil_lbar_enable(); + else + divil_lbar_disable(); + break; + case PCI_STATUS: + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + temp = lo & 0x0000ffff; + if ((value & PCI_STATUS_SIG_TARGET_ABORT) && + (lo & SB_TAS_ERR_EN)) + temp |= SB_TAS_ERR_FLAG; + + if ((value & PCI_STATUS_REC_TARGET_ABORT) && + (lo & SB_TAR_ERR_EN)) + temp |= SB_TAR_ERR_FLAG; + + if ((value & PCI_STATUS_REC_MASTER_ABORT) + && (lo & SB_MAR_ERR_EN)) + temp |= SB_MAR_ERR_FLAG; + + if ((value & PCI_STATUS_DETECTED_PARITY) + && (lo & SB_PARE_ERR_EN)) + temp |= SB_PARE_ERR_FLAG; + + lo = temp; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR0_REG: + pci_isa_write_bar(0, value); + break; + case PCI_BAR1_REG: + pci_isa_write_bar(1, value); + break; + case PCI_BAR2_REG: + pci_isa_write_bar(2, value); + break; + case PCI_BAR3_REG: + pci_isa_write_bar(3, value); + break; + case PCI_BAR4_REG: + pci_isa_write_bar(4, value); + break; + case PCI_BAR5_REG: + pci_isa_write_bar(5, value); + break; + case PCI_UART1_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart1 interrupt in PIC */ + lo &= ~(0xf << 24); + if (value) /* enable uart1 interrupt in PIC */ + lo |= (CS5536_UART1_INTR << 24); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_UART2_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart2 interrupt in PIC */ + lo &= ~(0xf << 28); + if (value) /* enable uart2 interrupt in PIC */ + lo |= (CS5536_UART2_INTR << 28); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_ISA_FIXUP_REG: + if (value) { + /* enable the TARGET ABORT/MASTER ABORT etc. */ + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + lo |= 0x00000063; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + + default: + /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ + break; + } +} + +/* + * isa_read: ISA read transfers + * + * We assume that this is not a bus master transfer. + */ +u32 pci_isa_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + /* we just check the first LBAR for the IO enable bit, */ + /* maybe we should changed later. */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); + if (hi & 0x01) + conf_data |= PCI_COMMAND_IO; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + conf_data |= PCI_STATUS_FAST_BACK; + + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_TAS_ERR_FLAG) + conf_data |= PCI_STATUS_SIG_TARGET_ABORT; + if (lo & SB_TAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_TARGET_ABORT; + if (lo & SB_MAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_MASTER_ABORT; + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_DETECTED_PARITY; + break; + case PCI_CLASS_REVISION: + _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ISA_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); + break; + /* + * we only use the LBAR of DIVIL, no RCONF used. + * all of them are IO space. + */ + case PCI_BAR0_REG: + return pci_isa_read_bar(0); + break; + case PCI_BAR1_REG: + return pci_isa_read_bar(1); + break; + case PCI_BAR2_REG: + return pci_isa_read_bar(2); + break; + case PCI_BAR3_REG: + break; + case PCI_BAR4_REG: + return pci_isa_read_bar(4); + break; + case PCI_BAR5_REG: + return pci_isa_read_bar(5); + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + /* no interrupt used here */ + conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); + break; + default: + break; + } + + return conf_data; +} diff --git a/trunk/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/trunk/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c new file mode 100644 index 000000000000..6cb44dbaeec2 --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -0,0 +1,217 @@ +/* + * CS5536 General timer functions + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu zhangjin, wuzj@lemote.com + * + * Reference: AMD Geode(TM) CS5536 Companion Device Data Book + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +DEFINE_SPINLOCK(mfgpt_lock); +EXPORT_SYMBOL(mfgpt_lock); + +static u32 mfgpt_base; + +/* + * Initialize the MFGPT timer. + * + * This is also called after resume to bring the MFGPT into operation again. + */ + +/* disable counter */ +void disable_mfgpt0_counter(void) +{ + outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); +} +EXPORT_SYMBOL(disable_mfgpt0_counter); + +/* enable counter, comparator2 to event mode, 14.318MHz clock */ +void enable_mfgpt0_counter(void) +{ + outw(0xe310, MFGPT0_SETUP); +} +EXPORT_SYMBOL(enable_mfgpt0_counter); + +static void init_mfgpt_timer(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + spin_lock(&mfgpt_lock); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ + outw(0, MFGPT0_CNT); /* set counter to 0 */ + enable_mfgpt0_counter(); + break; + + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + if (evt->mode == CLOCK_EVT_MODE_PERIODIC || + evt->mode == CLOCK_EVT_MODE_ONESHOT) + disable_mfgpt0_counter(); + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* The oneshot mode have very high deviation, Not use it! */ + break; + + case CLOCK_EVT_MODE_RESUME: + /* Nothing to do here */ + break; + } + spin_unlock(&mfgpt_lock); +} + +static struct clock_event_device mfgpt_clockevent = { + .name = "mfgpt", + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = init_mfgpt_timer, + .irq = CS5536_MFGPT_INTR, +}; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 basehi; + + /* + * get MFGPT base address + * + * NOTE: do not remove me, it's need for the value of mfgpt_base is + * variable + */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + /* ack */ + outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); + + mfgpt_clockevent.event_handler(&mfgpt_clockevent); + + return IRQ_HANDLED; +} + +static struct irqaction irq5 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .name = "timer" +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_mfgpt0_timer(void) +{ + u32 basehi; + struct clock_event_device *cd = &mfgpt_clockevent; + unsigned int cpu = smp_processor_id(); + + cd->cpumask = cpumask_of(cpu); + clockevent_set_clock(cd, MFGPT_TICK_RATE); + cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0xf, cd); + + /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ + _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); + + /* Enable Interrupt Gate 5 */ + _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); + + /* get MFGPT base address */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + clockevents_register_device(cd); + + setup_irq(CS5536_MFGPT_INTR, &irq5); +} + +/* + * Since the MFGPT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static cycle_t mfgpt_read(struct clocksource *cs) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + spin_lock_irqsave(&mfgpt_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + /* read the count */ + count = inw(MFGPT0_CNT); + + /* + * It's possible for count to appear to go the wrong way for this + * reason: + * + * The timer counter underflows, but we haven't handled the resulting + * interrupt and incremented jiffies yet. + * + * Previous attempts to handle these cases intelligently were buggy, so + * we just do the simple thing now. + */ + if (count < old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + spin_unlock_irqrestore(&mfgpt_lock, flags); + + return (cycle_t) (jifs * COMPARE) + count; +} + +static struct clocksource clocksource_mfgpt = { + .name = "mfgpt", + .rating = 120, /* Functional for real use, but not desired */ + .read = mfgpt_read, + .mask = CLOCKSOURCE_MASK(32), + .mult = 0, + .shift = 22, +}; + +int __init init_mfgpt_clocksource(void) +{ + if (num_possible_cpus() > 1) /* MFGPT does not scale! */ + return 0; + + clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22); + return clocksource_register(&clocksource_mfgpt); +} + +arch_initcall(init_mfgpt_clocksource); diff --git a/trunk/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/trunk/arch/mips/loongson/common/cs5536/cs5536_ohci.c new file mode 100644 index 000000000000..8fdb02b6e90f --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/cs5536_ohci.c @@ -0,0 +1,147 @@ +/* + * the OHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +void pci_ohci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); + } + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); + if (value) /* enable all the usb interrupt in PIC */ + lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_ohci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_OHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_OHCI_FLAG) { + conf_data = CS5536_OHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + conf_data = lo & 0xffffff00; + conf_data &= ~0x0000000f; /* 32bit mem */ + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + if ((lo & 0x00000f00) == CS5536_USB_INTR) + conf_data = 1; + break; + default: + break; + } + + return conf_data; +} diff --git a/trunk/arch/mips/loongson/common/cs5536/cs5536_pci.c b/trunk/arch/mips/loongson/common/cs5536/cs5536_pci.c new file mode 100644 index 000000000000..e23f3d7d2c1d --- /dev/null +++ b/trunk/arch/mips/loongson/common/cs5536/cs5536_pci.c @@ -0,0 +1,87 @@ +/* + * read/write operation to the PCI config space of CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * the Virtual Support Module(VSM) for virtulizing the PCI + * configure space are defined in cs5536_modulename.c respectively, + * + * after this virtulizing, user can access the PCI configure space + * directly as a normal multi-function PCI device which follows + * the PCI-2.2 spec. + */ + +#include +#include + +enum { + CS5536_FUNC_START = -1, + CS5536_ISA_FUNC, + reserved_func, + CS5536_IDE_FUNC, + CS5536_ACC_FUNC, + CS5536_OHCI_FUNC, + CS5536_EHCI_FUNC, + CS5536_FUNC_END, +}; + +static const cs5536_pci_vsm_write vsm_conf_write[] = { + [CS5536_ISA_FUNC] pci_isa_write_reg, + [reserved_func] NULL, + [CS5536_IDE_FUNC] pci_ide_write_reg, + [CS5536_ACC_FUNC] pci_acc_write_reg, + [CS5536_OHCI_FUNC] pci_ohci_write_reg, + [CS5536_EHCI_FUNC] pci_ehci_write_reg, +}; + +static const cs5536_pci_vsm_read vsm_conf_read[] = { + [CS5536_ISA_FUNC] pci_isa_read_reg, + [reserved_func] NULL, + [CS5536_IDE_FUNC] pci_ide_read_reg, + [CS5536_ACC_FUNC] pci_acc_read_reg, + [CS5536_OHCI_FUNC] pci_ohci_read_reg, + [CS5536_EHCI_FUNC] pci_ehci_read_reg, +}; + +/* + * write to PCI config space and transfer it to MSR write. + */ +void cs5536_pci_conf_write4(int function, int reg, u32 value) +{ + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return; + if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) + return; + + if (vsm_conf_write[function] != NULL) + vsm_conf_write[function](reg, value); +} + +/* + * read PCI config space and transfer it to MSR access. + */ +u32 cs5536_pci_conf_read4(int function, int reg) +{ + u32 data = 0; + + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return 0; + if ((reg < 0) || ((reg & 0x03) != 0)) + return 0; + if (reg > 0x100) + return 0xffffffff; + + if (vsm_conf_read[function] != NULL) + data = vsm_conf_read[function](reg); + + return data; +} diff --git a/trunk/arch/mips/loongson/common/early_printk.c b/trunk/arch/mips/loongson/common/early_printk.c index bc73edc0cfd8..23e7a8f8897f 100644 --- a/trunk/arch/mips/loongson/common/early_printk.c +++ b/trunk/arch/mips/loongson/common/early_printk.c @@ -1,7 +1,7 @@ /* early printk support * * Copyright (c) 2009 Philippe Vachon - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (c) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -12,26 +12,29 @@ #include #include -#include #define PORT(base, offset) (u8 *)(base + offset) -static inline unsigned int serial_in(phys_addr_t base, int offset) +static inline unsigned int serial_in(unsigned char *base, int offset) { return readb(PORT(base, offset)); } -static inline void serial_out(phys_addr_t base, int offset, int value) +static inline void serial_out(unsigned char *base, int offset, int value) { writeb(value, PORT(base, offset)); } void prom_putchar(char c) { - phys_addr_t uart_base = - (phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8); + int timeout; + unsigned char *uart_base; - while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) + uart_base = (unsigned char *)_loongson_uart_base; + timeout = 1024; + + while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && + (timeout-- > 0)) ; serial_out(uart_base, UART_TX, c); diff --git a/trunk/arch/mips/loongson/common/env.c b/trunk/arch/mips/loongson/common/env.c index b9ef50385541..196d947d929a 100644 --- a/trunk/arch/mips/loongson/common/env.c +++ b/trunk/arch/mips/loongson/common/env.c @@ -17,11 +17,14 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include + #include #include unsigned long bus_clock, cpu_clock_freq; +EXPORT_SYMBOL(cpu_clock_freq); unsigned long memsize, highmemsize; /* pmon passes arguments in 32bit pointers */ diff --git a/trunk/arch/mips/loongson/common/init.c b/trunk/arch/mips/loongson/common/init.c index 3abe927422a3..a2abd9355737 100644 --- a/trunk/arch/mips/loongson/common/init.c +++ b/trunk/arch/mips/loongson/common/init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzj@lemote.com * * This program is free software; you can redistribute it and/or modify it @@ -10,19 +10,28 @@ #include -#include - #include +/* Loongson CPU address windows config space base address */ +unsigned long __maybe_unused _loongson_addrwincfg_base; + void __init prom_init(void) { - /* init base address of io space */ + /* init base address of io space */ set_io_port_base((unsigned long) - ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE)); + ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + _loongson_addrwincfg_base = (unsigned long) + ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); +#endif prom_init_cmdline(); prom_init_env(); prom_init_memory(); + + /*init the uart base address */ + prom_init_uart_base(); } void __init prom_free_prom_memory(void) diff --git a/trunk/arch/mips/loongson/common/irq.c b/trunk/arch/mips/loongson/common/irq.c index b32b4a3e5137..20e732831978 100644 --- a/trunk/arch/mips/loongson/common/irq.c +++ b/trunk/arch/mips/loongson/common/irq.c @@ -20,21 +20,21 @@ void bonito_irqdispatch(void) int i; /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = BONITO_INTISR; + int_status = LOONGSON_INTISR; if (int_status & (1 << 10)) { while (int_status & (1 << 10)) { udelay(1); - int_status = BONITO_INTISR; + int_status = LOONGSON_INTISR; } } /* Get pending sources, masked by current enables */ - int_status = BONITO_INTISR & BONITO_INTEN; + int_status = LOONGSON_INTISR & LOONGSON_INTEN; if (int_status != 0) { i = __ffs(int_status); int_status &= ~(1 << i); - do_IRQ(BONITO_IRQ_BASE + i); + do_IRQ(LOONGSON_IRQ_BASE + i); } } @@ -60,13 +60,13 @@ void __init arch_init_irq(void) set_irq_trigger_mode(); /* no steer */ - BONITO_INTSTEER = 0; + LOONGSON_INTSTEER = 0; /* * Mask out all interrupt by writing "1" to all bit position in * the interrupt reset reg. */ - BONITO_INTENCLR = ~0; + LOONGSON_INTENCLR = ~0; /* machine specific irq init */ mach_init_irq(); diff --git a/trunk/arch/mips/loongson/common/machtype.c b/trunk/arch/mips/loongson/common/machtype.c index 7b348248de7d..0ed52b3f5314 100644 --- a/trunk/arch/mips/loongson/common/machtype.c +++ b/trunk/arch/mips/loongson/common/machtype.c @@ -15,6 +15,9 @@ #include #include +/* please ensure the length of the machtype string is less than 50 */ +#define MACHTYPE_LEN 50 + static const char *system_types[] = { [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", @@ -22,29 +25,35 @@ static const char *system_types[] = { [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_LEMOTE_NAS] "lemote-nas-2f", + [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", [MACH_LOONGSON_END] NULL, }; const char *get_system_type(void) { - if (mips_machtype == MACH_UNKNOWN) - mips_machtype = LOONGSON_MACHTYPE; - return system_types[mips_machtype]; } -static __init int machtype_setup(char *str) +void __init prom_init_machtype(void) { + char *p, str[MACHTYPE_LEN]; int machtype = MACH_LEMOTE_FL2E; - if (!str) - return -EINVAL; + mips_machtype = LOONGSON_MACHTYPE; + + p = strstr(arcs_cmdline, "machtype="); + if (!p) + return; + p += strlen("machtype="); + strncpy(str, p, MACHTYPE_LEN); + p = strstr(str, " "); + if (p) + *p = '\0'; for (; system_types[machtype]; machtype++) if (strstr(system_types[machtype], str)) { mips_machtype = machtype; break; } - return 0; } -__setup("machtype=", machtype_setup); diff --git a/trunk/arch/mips/loongson/common/mem.c b/trunk/arch/mips/loongson/common/mem.c index e94ef158f980..ceacd092b446 100644 --- a/trunk/arch/mips/loongson/common/mem.c +++ b/trunk/arch/mips/loongson/common/mem.c @@ -12,15 +12,40 @@ #include #include +#include void __init prom_init_memory(void) { add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + + add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << + 20), BOOT_MEM_RESERVED); +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + { + int bit; + + bit = fls(memsize + highmemsize); + if (bit != ffs(memsize + highmemsize)) + bit += 20; + else + bit = bit + 20 - 1; + + /* set cpu window3 to map CPU to DDR: 2G -> 2G */ + LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, + 0x80000000ul, (1 << bit)); + mmiowb(); + } +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + #ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); -#endif /* CONFIG_64BIT */ + if (highmemsize > 0) + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); + + add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - + LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); + +#endif /* !CONFIG_64BIT */ } /* override of arch/mips/mm/cache.c: __uncached_access */ @@ -33,3 +58,61 @@ int __uncached_access(struct file *file, unsigned long addr) ((addr >= LOONGSON_MMIO_MEM_START) && (addr < LOONGSON_MMIO_MEM_END)); } + +#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED + +#include +#include +#include + +static unsigned long uca_start, uca_end; + +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot) +{ + unsigned long offset = pfn << PAGE_SHIFT; + unsigned long end = offset + size; + + if (__uncached_access(file, offset)) { + if (((uca_start && offset) >= uca_start) && + (end <= uca_end)) + return __pgprot((pgprot_val(vma_prot) & + ~_CACHE_MASK) | + _CACHE_UNCACHED_ACCELERATED); + else + return pgprot_noncached(vma_prot); + } + return vma_prot; +} + +static int __init find_vga_mem_init(void) +{ + struct pci_dev *dev = 0; + struct resource *r; + int idx; + + if (uca_start) + return 0; + + for_each_pci_dev(dev) { + if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { + for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { + r = &dev->resource[idx]; + if (!r->start && r->end) + continue; + if (r->flags & IORESOURCE_IO) + continue; + if (r->flags & IORESOURCE_MEM) { + uca_start = r->start; + uca_end = r->end; + return 0; + } + } + } + } + + return 0; +} + +late_initcall(find_vga_mem_init); +#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/trunk/arch/mips/loongson/common/pci.c b/trunk/arch/mips/loongson/common/pci.c index a3a4abfb6c9a..31d8c5ecd16c 100644 --- a/trunk/arch/mips/loongson/common/pci.c +++ b/trunk/arch/mips/loongson/common/pci.c @@ -27,7 +27,7 @@ static struct resource loongson_pci_io_resource = { }; static struct pci_controller loongson_pci_controller = { - .pci_ops = &bonito64_pci_ops, + .pci_ops = &loongson_pci_ops, .io_resource = &loongson_pci_io_resource, .mem_resource = &loongson_pci_mem_resource, .mem_offset = 0x00000000UL, @@ -44,15 +44,15 @@ static void __init setup_pcimap(void) * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 * [<2G] [384M,448M] [320M,384M] [0M,64M] */ - BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 | - BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) | - BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) | - BONITO_PCIMAP_WIN(0, 0); + LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | + LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | + LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | + LOONGSON_PCIMAP_WIN(0, 0); /* * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] */ - BONITO_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ + LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ /* size: 256M, burst transmission, pre-fetch enable, 64bit */ LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; @@ -67,6 +67,14 @@ static void __init setup_pcimap(void) /* can not change gnt to break pci transfer when device's gnt not deassert for some broken device */ LOONGSON_PXARB_CFG = 0x00fe0105ul; + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + /* + * set cpu addr window2 to map CPU address space to PCI address space + */ + LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, + LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); +#endif } static int __init pcibios_init(void) diff --git a/trunk/arch/mips/loongson/common/platform.c b/trunk/arch/mips/loongson/common/platform.c new file mode 100644 index 000000000000..be81777eb94d --- /dev/null +++ b/trunk/arch/mips/loongson/common/platform.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +static struct platform_device loongson2_cpufreq_device = { + .name = "loongson2_cpufreq", + .id = -1, +}; + +static int __init loongson2_cpufreq_init(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* Only 2F revision and it's successors support CPUFreq */ + if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) + return platform_device_register(&loongson2_cpufreq_device); + + return -ENODEV; +} + +arch_initcall(loongson2_cpufreq_init); diff --git a/trunk/arch/mips/loongson/common/pm.c b/trunk/arch/mips/loongson/common/pm.c new file mode 100644 index 000000000000..b625fec8a4d5 --- /dev/null +++ b/trunk/arch/mips/loongson/common/pm.c @@ -0,0 +1,161 @@ +/* + * loongson-specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include + +#include +#include + +#include + +static unsigned int __maybe_unused cached_master_mask; /* i8259A */ +static unsigned int __maybe_unused cached_slave_mask; +static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ + +void arch_suspend_disable_irqs(void) +{ + /* disable all mips events */ + local_irq_disable(); + +#ifdef CONFIG_I8259 + /* disable all events of i8259A */ + cached_slave_mask = inb(PIC_SLAVE_IMR); + cached_master_mask = inb(PIC_MASTER_IMR); + + outb(0xff, PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + outb(0xff, PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); +#endif + /* disable all events of bonito */ + cached_bonito_irq_mask = LOONGSON_INTEN; + LOONGSON_INTENCLR = 0xffff; + (void)LOONGSON_INTENCLR; +} + +void arch_suspend_enable_irqs(void) +{ + /* enable all mips events */ + local_irq_enable(); +#ifdef CONFIG_I8259 + /* only enable the cached events of i8259A */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(cached_master_mask, PIC_MASTER_IMR); +#endif + /* enable all cached events of bonito */ + LOONGSON_INTENSET = cached_bonito_irq_mask; + (void)LOONGSON_INTENSET; +} + +/* + * Setup the board-specific events for waking up loongson from wait mode + */ +void __weak setup_wakeup_events(void) +{ +} + +/* + * Check wakeup events + */ +int __weak wakeup_loongson(void) +{ + return 1; +} + +/* + * If the events are really what we want to wakeup the CPU, wake it up + * otherwise put the CPU asleep again. + */ +static void wait_for_wakeup_events(void) +{ + while (!wakeup_loongson()) + LOONGSON_CHIPCFG0 &= ~0x7; +} + +/* + * Stop all perf counters + * + * $24 is the control register of Loongson perf counter + */ +static inline void stop_perf_counters(void) +{ + __write_64bit_c0_register($24, 0, 0); +} + + +static void loongson_suspend_enter(void) +{ + static unsigned int cached_cpu_freq; + + /* setup wakeup events via enabling the IRQs */ + setup_wakeup_events(); + + stop_perf_counters(); + + cached_cpu_freq = LOONGSON_CHIPCFG0; + + /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 &= ~0x7; + + /* wait for the given events to wakeup cpu from wait mode */ + wait_for_wakeup_events(); + + LOONGSON_CHIPCFG0 = cached_cpu_freq; + mmiowb(); +} + +void __weak mach_suspend(void) +{ +} + +void __weak mach_resume(void) +{ +} + +static int loongson_pm_enter(suspend_state_t state) +{ + mach_suspend(); + + /* processor specific suspend */ + loongson_suspend_enter(); + + mach_resume(); + + return 0; +} + +static int loongson_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static struct platform_suspend_ops loongson_pm_ops = { + .valid = loongson_pm_valid_state, + .enter = loongson_pm_enter, +}; + +static int __init loongson_pm_init(void) +{ + suspend_set_ops(&loongson_pm_ops); + + return 0; +} +arch_initcall(loongson_pm_init); diff --git a/trunk/arch/mips/loongson/common/reset.c b/trunk/arch/mips/loongson/common/reset.c index 97e918251edd..d57f1719da95 100644 --- a/trunk/arch/mips/loongson/common/reset.c +++ b/trunk/arch/mips/loongson/common/reset.c @@ -22,7 +22,7 @@ static void loongson_restart(char *command) mach_prepare_reboot(); /* reboot via jumping to boot base address */ - ((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) (); + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); } static void loongson_halt(void) diff --git a/trunk/arch/mips/loongson/common/serial.c b/trunk/arch/mips/loongson/common/serial.c new file mode 100644 index 000000000000..23b66a5f88cb --- /dev/null +++ b/trunk/arch/mips/loongson/common/serial.c @@ -0,0 +1,76 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Yan hua (yanhua@lemote.com) + * Author: Wu Zhangjin (wuzj@lemote.com) + */ + +#include +#include +#include + +#include + +#include +#include + +#define PORT(int) \ +{ \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define PORT_M(int) \ +{ \ + .irq = MIPS_CPU_IRQ_BASE + (int), \ + .uartclk = 3686400, \ + .iotype = UPIO_MEM, \ + .membase = (void __iomem *)NULL, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[][2] = { + [MACH_LOONGSON_UNKNOWN] {}, + [MACH_LEMOTE_FL2E] {PORT(4), {} }, + [MACH_LEMOTE_FL2F] {PORT(3), {} }, + [MACH_LEMOTE_ML2F7] {PORT_M(3), {} }, + [MACH_LEMOTE_YL2F89] {PORT_M(3), {} }, + [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} }, + [MACH_LEMOTE_NAS] {PORT_M(3), {} }, + [MACH_LEMOTE_LL2F] {PORT(3), {} }, + [MACH_LOONGSON_END] {}, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, +}; + +static int __init serial_init(void) +{ + unsigned char iotype; + + iotype = uart8250_data[mips_machtype][0].iotype; + + if (UPIO_MEM == iotype) + uart8250_data[mips_machtype][0].membase = + (void __iomem *)_loongson_uart_base; + else if (UPIO_PORT == iotype) + uart8250_data[mips_machtype][0].iobase = + loongson_uart_base - LOONGSON_PCIIO_BASE; + + uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; + + return platform_device_register(&uart8250_device); +} + +device_initcall(serial_init); diff --git a/trunk/arch/mips/loongson/common/time.c b/trunk/arch/mips/loongson/common/time.c index 6e08c8270abe..35f0b66a94f5 100644 --- a/trunk/arch/mips/loongson/common/time.c +++ b/trunk/arch/mips/loongson/common/time.c @@ -14,11 +14,14 @@ #include #include +#include void __init plat_time_init(void) { /* setup mips r4k timer */ mips_hpt_frequency = cpu_clock_freq / 2; + + setup_mfgpt0_timer(); } void read_persistent_clock(struct timespec *ts) diff --git a/trunk/arch/mips/loongson/common/uart_base.c b/trunk/arch/mips/loongson/common/uart_base.c new file mode 100644 index 000000000000..78ff66ae749e --- /dev/null +++ b/trunk/arch/mips/loongson/common/uart_base.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +#include + +/* ioremapped */ +unsigned long _loongson_uart_base; +EXPORT_SYMBOL(_loongson_uart_base); +/* raw */ +unsigned long loongson_uart_base; +EXPORT_SYMBOL(loongson_uart_base); + +void prom_init_loongson_uart_base(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2E: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8; + break; + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_LL2F: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8; + break; + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + case MACH_DEXXON_GDIUM2F10: + case MACH_LEMOTE_NAS: + default: + /* The CPU provided serial port */ + loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8; + break; + } + + _loongson_uart_base = + (unsigned long)ioremap_nocache(loongson_uart_base, 8); +} diff --git a/trunk/arch/mips/loongson/fuloong-2e/irq.c b/trunk/arch/mips/loongson/fuloong-2e/irq.c index 7888cf69424a..320e9379bdd7 100644 --- a/trunk/arch/mips/loongson/fuloong-2e/irq.c +++ b/trunk/arch/mips/loongson/fuloong-2e/irq.c @@ -47,8 +47,8 @@ static struct irqaction cascade_irqaction = { void __init set_irq_trigger_mode(void) { /* most bonito irq should be level triggered */ - BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | - BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; + LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR | + LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES; } void __init mach_init_irq(void) diff --git a/trunk/arch/mips/loongson/fuloong-2e/reset.c b/trunk/arch/mips/loongson/fuloong-2e/reset.c index 677fe186db95..fc16c677d476 100644 --- a/trunk/arch/mips/loongson/fuloong-2e/reset.c +++ b/trunk/arch/mips/loongson/fuloong-2e/reset.c @@ -14,8 +14,8 @@ void mach_prepare_reboot(void) { - BONITO_BONGENCFG &= ~(1 << 2); - BONITO_BONGENCFG |= (1 << 2); + LOONGSON_GENCFG &= ~(1 << 2); + LOONGSON_GENCFG |= (1 << 2); } void mach_prepare_shutdown(void) diff --git a/trunk/arch/mips/loongson/lemote-2f/Makefile b/trunk/arch/mips/loongson/lemote-2f/Makefile new file mode 100644 index 000000000000..4d84b27dc41b --- /dev/null +++ b/trunk/arch/mips/loongson/lemote-2f/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for lemote loongson2f family machines +# + +obj-y += irq.o reset.o ec_kb3310b.o + +# +# Suspend Support +# + +obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/trunk/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/trunk/arch/mips/loongson/lemote-2f/ec_kb3310b.c new file mode 100644 index 000000000000..4d84111a2cd4 --- /dev/null +++ b/trunk/arch/mips/loongson/lemote-2f/ec_kb3310b.c @@ -0,0 +1,130 @@ +/* + * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl , 2008-04-20 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include + +#include "ec_kb3310b.h" + +static DEFINE_SPINLOCK(index_access_lock); +static DEFINE_SPINLOCK(port_access_lock); + +unsigned char ec_read(unsigned short addr) +{ + unsigned char value; + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + value = inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return value; +} +EXPORT_SYMBOL_GPL(ec_read); + +void ec_write(unsigned short addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + outb(val, EC_IO_PORT_DATA); + /* flush the write action */ + inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return; +} +EXPORT_SYMBOL_GPL(ec_write); + +/* + * This function is used for EC command writes and corresponding status queries. + */ +int ec_query_seq(unsigned char cmd) +{ + int timeout; + unsigned char status; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&port_access_lock, flags); + + /* make chip goto reset mode */ + udelay(EC_REG_DELAY); + outb(cmd, EC_CMD_PORT); + udelay(EC_REG_DELAY); + + /* check if the command is received by ec */ + timeout = EC_CMD_TIMEOUT; + status = inb(EC_STS_PORT); + while (timeout-- && (status & (1 << 1))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + + if (timeout <= 0) { + printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); + ret = -EINVAL; + } else + printk(KERN_INFO + "(%x/%d)ec issued command %d status : 0x%x\n", + timeout, EC_CMD_TIMEOUT - timeout, cmd, status); + + spin_unlock_irqrestore(&port_access_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(ec_query_seq); + +/* + * Send query command to EC to get the proper event number + */ +int ec_query_event_num(void) +{ + return ec_query_seq(CMD_GET_EVENT_NUM); +} +EXPORT_SYMBOL(ec_query_event_num); + +/* + * Get event number from EC + * + * NOTE: This routine must follow the query_event_num function in the + * interrupt. + */ +int ec_get_event_num(void) +{ + int timeout = 100; + unsigned char value; + unsigned char status; + + udelay(EC_REG_DELAY); + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + while (timeout-- && !(status & (1 << 0))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + if (timeout <= 0) { + pr_info("%s: get event number timeout.\n", __func__); + + return -EINVAL; + } + value = inb(EC_DAT_PORT); + udelay(EC_REG_DELAY); + + return value; +} +EXPORT_SYMBOL(ec_get_event_num); diff --git a/trunk/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/trunk/arch/mips/loongson/lemote-2f/ec_kb3310b.h new file mode 100644 index 000000000000..1595a21b315b --- /dev/null +++ b/trunk/arch/mips/loongson/lemote-2f/ec_kb3310b.h @@ -0,0 +1,188 @@ +/* + * KB3310B Embedded Controller + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl , 2008-03-14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _EC_KB3310B_H +#define _EC_KB3310B_H + +extern unsigned char ec_read(unsigned short addr); +extern void ec_write(unsigned short addr, unsigned char val); +extern int ec_query_seq(unsigned char cmd); +extern int ec_query_event_num(void); +extern int ec_get_event_num(void); + +typedef int (*sci_handler) (int status); +extern sci_handler yeeloong_report_lid_status; + +#define SCI_IRQ_NUM 0x0A + +/* + * The following registers are determined by the EC index configuration. + * 1, fill the PORT_HIGH as EC register high part. + * 2, fill the PORT_LOW as EC register low part. + * 3, fill the PORT_DATA as EC register write data or get the data from it. + */ +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 + +/* + * EC delay time is 500us for register and status access + */ +#define EC_REG_DELAY 500 /* unit : us */ +#define EC_CMD_TIMEOUT 0x1000 + +/* + * EC access port for SCI communication + */ +#define EC_CMD_PORT 0x66 +#define EC_STS_PORT 0x66 +#define EC_DAT_PORT 0x62 +#define CMD_INIT_IDLE_MODE 0xdd +#define CMD_EXIT_IDLE_MODE 0xdf +#define CMD_INIT_RESET_MODE 0xd8 +#define CMD_REBOOT_SYSTEM 0x8c +#define CMD_GET_EVENT_NUM 0x84 +#define CMD_PROGRAM_PIECE 0xda + +/* temperature & fan registers */ +#define REG_TEMPERATURE_VALUE 0xF458 +#define REG_FAN_AUTO_MAN_SWITCH 0xF459 +#define BIT_FAN_AUTO 0 +#define BIT_FAN_MANUAL 1 +#define REG_FAN_CONTROL 0xF4D2 +#define BIT_FAN_CONTROL_ON (1 << 0) +#define BIT_FAN_CONTROL_OFF (0 << 0) +#define REG_FAN_STATUS 0xF4DA +#define BIT_FAN_STATUS_ON (1 << 0) +#define BIT_FAN_STATUS_OFF (0 << 0) +#define REG_FAN_SPEED_HIGH 0xFE22 +#define REG_FAN_SPEED_LOW 0xFE23 +#define REG_FAN_SPEED_LEVEL 0xF4CC +/* fan speed divider */ +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ + +/* battery registers */ +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D +#define REG_BAT_DESIGN_CAP_LOW 0xF77E +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 +#define REG_BAT_FULLCHG_CAP_LOW 0xF781 +#define REG_BAT_DESIGN_VOL_HIGH 0xF782 +#define REG_BAT_DESIGN_VOL_LOW 0xF783 +#define REG_BAT_CURRENT_HIGH 0xF784 +#define REG_BAT_CURRENT_LOW 0xF785 +#define REG_BAT_VOLTAGE_HIGH 0xF786 +#define REG_BAT_VOLTAGE_LOW 0xF787 +#define REG_BAT_TEMPERATURE_HIGH 0xF788 +#define REG_BAT_TEMPERATURE_LOW 0xF789 +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 +#define REG_BAT_RELATIVE_CAP_LOW 0xF493 +#define REG_BAT_VENDOR 0xF4C4 +#define FLAG_BAT_VENDOR_SANYO 0x01 +#define FLAG_BAT_VENDOR_SIMPLO 0x02 +#define REG_BAT_CELL_COUNT 0xF4C6 +#define FLAG_BAT_CELL_3S1P 0x03 +#define FLAG_BAT_CELL_3S2P 0x06 +#define REG_BAT_CHARGE 0xF4A2 +#define FLAG_BAT_CHARGE_DISCHARGE 0x01 +#define FLAG_BAT_CHARGE_CHARGE 0x02 +#define FLAG_BAT_CHARGE_ACPOWER 0x00 +#define REG_BAT_STATUS 0xF4B0 +#define BIT_BAT_STATUS_LOW (1 << 5) +#define BIT_BAT_STATUS_DESTROY (1 << 2) +#define BIT_BAT_STATUS_FULL (1 << 1) +#define BIT_BAT_STATUS_IN (1 << 0) +#define REG_BAT_CHARGE_STATUS 0xF4B1 +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) +#define REG_BAT_STATE 0xF482 +#define BIT_BAT_STATE_CHARGING (1 << 1) +#define BIT_BAT_STATE_DISCHARGING (1 << 0) +#define REG_BAT_POWER 0xF440 +#define BIT_BAT_POWER_S3 (1 << 2) +#define BIT_BAT_POWER_ON (1 << 1) +#define BIT_BAT_POWER_ACIN (1 << 0) + +/* other registers */ +/* Audio: rd/wr */ +#define REG_AUDIO_VOLUME 0xF46C +#define REG_AUDIO_MUTE 0xF4E7 +#define REG_AUDIO_BEEP 0xF4D0 +/* USB port power or not: rd/wr */ +#define REG_USB0_FLAG 0xF461 +#define REG_USB1_FLAG 0xF462 +#define REG_USB2_FLAG 0xF463 +#define BIT_USB_FLAG_ON 1 +#define BIT_USB_FLAG_OFF 0 +/* LID */ +#define REG_LID_DETECT 0xF4BD +#define BIT_LID_DETECT_ON 1 +#define BIT_LID_DETECT_OFF 0 +/* CRT */ +#define REG_CRT_DETECT 0xF4AD +#define BIT_CRT_DETECT_PLUG 1 +#define BIT_CRT_DETECT_UNPLUG 0 +/* LCD backlight brightness adjust: 9 levels */ +#define REG_DISPLAY_BRIGHTNESS 0xF4F5 +/* Black screen Status */ +#define BIT_DISPLAY_LCD_ON 1 +#define BIT_DISPLAY_LCD_OFF 0 +/* LCD backlight control: off/restore */ +#define REG_BACKLIGHT_CTRL 0xF7BD +#define BIT_BACKLIGHT_ON 1 +#define BIT_BACKLIGHT_OFF 0 +/* Reset the machine auto-clear: rd/wr */ +#define REG_RESET 0xF4EC +#define BIT_RESET_ON 1 +/* Light the led: rd/wr */ +#define REG_LED 0xF4C8 +#define BIT_LED_RED_POWER (1 << 0) +#define BIT_LED_ORANGE_POWER (1 << 1) +#define BIT_LED_GREEN_CHARGE (1 << 2) +#define BIT_LED_RED_CHARGE (1 << 3) +#define BIT_LED_NUMLOCK (1 << 4) +/* Test led mode, all led on/off */ +#define REG_LED_TEST 0xF4C2 +#define BIT_LED_TEST_IN 1 +#define BIT_LED_TEST_OUT 0 +/* Camera on/off */ +#define REG_CAMERA_STATUS 0xF46A +#define BIT_CAMERA_STATUS_ON 1 +#define BIT_CAMERA_STATUS_OFF 0 +#define REG_CAMERA_CONTROL 0xF7B7 +#define BIT_CAMERA_CONTROL_OFF 0 +#define BIT_CAMERA_CONTROL_ON 1 +/* Wlan Status */ +#define REG_WLAN 0xF4FA +#define BIT_WLAN_ON 1 +#define BIT_WLAN_OFF 0 +#define REG_DISPLAY_LCD 0xF79F + +/* SCI Event Number from EC */ +enum { + EVENT_LID = 0x23, /* LID open/close */ + EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ + EVENT_OVERTEMP, /* Over-temperature happened */ + EVENT_CRT_DETECT, /* CRT is connected */ + EVENT_CAMERA, /* Camera on/off */ + EVENT_USB_OC2, /* USB2 Over Current occurred */ + EVENT_USB_OC0, /* USB0 Over Current occurred */ + EVENT_BLACK_SCREEN, /* Turn on/off backlight */ + EVENT_AUDIO_MUTE, /* Mute on/off */ + EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ + EVENT_AC_BAT, /* AC & Battery relative issue */ + EVENT_AUDIO_VOLUME, /* Volume adjust */ + EVENT_WLAN, /* Wlan on/off */ + EVENT_END +}; + +#endif /* !_EC_KB3310B_H */ diff --git a/trunk/arch/mips/loongson/lemote-2f/irq.c b/trunk/arch/mips/loongson/lemote-2f/irq.c new file mode 100644 index 000000000000..77d32f9cf31e --- /dev/null +++ b/trunk/arch/mips/loongson/lemote-2f/irq.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2007 Lemote Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +#include +#include +#include + +#include +#include + +#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ +#define LOONGSON_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ +#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ +#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ +#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ + +#define LOONGSON_INT_BIT_INT0 (1 << 11) +#define LOONGSON_INT_BIT_INT1 (1 << 12) + +/* + * The generic i8259_irq() make the kernel hang on booting. Since we cannot + * get the irq via the IRR directly, we access the ISR instead. + */ +int mach_i8259_irq(void) +{ + int irq, isr; + + irq = -1; + + if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { + spin_lock(&i8259A_lock); + isr = inb(PIC_MASTER_CMD) & + ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); + if (!isr) + isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; + irq = ffs(isr) - 1; + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + outb(0x0B, PIC_MASTER_ISR); /* ISR register */ + if (~inb(PIC_MASTER_ISR) & 0x80) + irq = -1; + } + spin_unlock(&i8259A_lock); + } + + return irq; +} +EXPORT_SYMBOL(mach_i8259_irq); + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = mach_i8259_irq(); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(LOONGSON_TIMER_IRQ); + else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ +#ifdef CONFIG_OPROFILE + do_IRQ(LOONGSON2_PERFCNT_IRQ); +#endif + bonito_irqdispatch(); + } else if (pending & CAUSEF_IP3) /* CPU UART */ + do_IRQ(LOONGSON_UART_IRQ); + else if (pending & CAUSEF_IP2) /* South Bridge */ + i8259_irqdispatch(); + else + spurious_interrupt(); +} + +void __init set_irq_trigger_mode(void) +{ + /* setup cs5536 as high level trigger */ + LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; + LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); +} + +static irqreturn_t ip6_action(int cpl, void *dev_id) +{ + return IRQ_HANDLED; +} + +struct irqaction ip6_irqaction = { + .handler = ip6_action, + .name = "cascade", + .flags = IRQF_SHARED, +}; + +struct irqaction cascade_irqaction = { + .handler = no_action, + .name = "cascade", +}; + +void __init mach_init_irq(void) +{ + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* setup north bridge irq (bonito) */ + setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); + /* setup source bridge irq (i8259) */ + setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); +} diff --git a/trunk/arch/mips/loongson/lemote-2f/pm.c b/trunk/arch/mips/loongson/lemote-2f/pm.c new file mode 100644 index 000000000000..d7af2e616592 --- /dev/null +++ b/trunk/arch/mips/loongson/lemote-2f/pm.c @@ -0,0 +1,149 @@ +/* + * Lemote loongson2f family machines' specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include "ec_kb3310b.h" + +#define I8042_KBD_IRQ 1 +#define I8042_CTR_KBDINT 0x01 +#define I8042_CTR_KBDDIS 0x10 + +static unsigned char i8042_ctr; + +static int i8042_enable_kbd_port(void) +{ + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { + pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." + "\n"); + return -EIO; + } + + i8042_ctr &= ~I8042_CTR_KBDDIS; + i8042_ctr |= I8042_CTR_KBDINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_KBDINT; + i8042_ctr |= I8042_CTR_KBDDIS; + pr_err("i8042.c: Failed to enable KBD port.\n"); + + return -EIO; + } + + return 0; +} + +void setup_wakeup_events(void) +{ + int irq_mask; + + switch (mips_machtype) { + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + /* open the keyboard irq in i8259A */ + outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR); + irq_mask = inb(PIC_MASTER_IMR); + + /* enable keyboard port */ + i8042_enable_kbd_port(); + + /* Wakeup CPU via SCI lid open event */ + outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); + outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + + break; + + default: + break; + } +} + +static struct delayed_work lid_task; +static int initialized; +/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */ +sci_handler yeeloong_report_lid_status; +EXPORT_SYMBOL(yeeloong_report_lid_status); +static void yeeloong_lid_update_task(struct work_struct *work) +{ + if (yeeloong_report_lid_status) + yeeloong_report_lid_status(BIT_LID_DETECT_ON); +} + +int wakeup_loongson(void) +{ + int irq; + + /* query the interrupt number */ + irq = mach_i8259_irq(); + if (irq < 0) + return 0; + + printk(KERN_INFO "%s: irq = %d\n", __func__, irq); + + if (irq == I8042_KBD_IRQ) + return 1; + else if (irq == SCI_IRQ_NUM) { + int ret, sci_event; + /* query the event number */ + ret = ec_query_seq(CMD_GET_EVENT_NUM); + if (ret < 0) + return 0; + sci_event = ec_get_event_num(); + if (sci_event < 0) + return 0; + if (sci_event == EVENT_LID) { + int lid_status; + /* check the LID status */ + lid_status = ec_read(REG_LID_DETECT); + /* wakeup cpu when people open the LID */ + if (lid_status == BIT_LID_DETECT_ON) { + /* If we call it directly here, the WARNING + * will be sent out by getnstimeofday + * via "WARN_ON(timekeeping_suspended);" + * because we can not schedule in suspend mode. + */ + if (initialized == 0) { + INIT_DELAYED_WORK(&lid_task, + yeeloong_lid_update_task); + initialized = 1; + } + schedule_delayed_work(&lid_task, 1); + return 1; + } + } + } + + return 0; +} + +void __weak mach_suspend(void) +{ + disable_mfgpt0_counter(); +} + +void __weak mach_resume(void) +{ + enable_mfgpt0_counter(); +} diff --git a/trunk/arch/mips/loongson/lemote-2f/reset.c b/trunk/arch/mips/loongson/lemote-2f/reset.c new file mode 100644 index 000000000000..51d1a60d5349 --- /dev/null +++ b/trunk/arch/mips/loongson/lemote-2f/reset.c @@ -0,0 +1,159 @@ +/* Board-specific reboot/shutdown routines + * + * Copyright (c) 2009 Philippe Vachon + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include + +#include + +#include +#include "ec_kb3310b.h" + +static void reset_cpu(void) +{ + /* + * reset cpu to full speed, this is needed when enabling cpu frequency + * scalling + */ + LOONGSON_CHIPCFG0 |= 0x7; +} + +/* reset support for fuloong2f */ + +static void fl2f_reboot(void) +{ + reset_cpu(); + + /* send a reset signal to south bridge. + * + * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset + * normally with this reset operation and it will not work in PMON, but + * you can type halt command and then reboot, seems the hardware reset + * logic not work normally. + */ + { + u32 hi, lo; + _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo); + lo |= 0x00000001; + _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo); + } +} + +static void fl2f_shutdown(void) +{ + u32 hi, lo, val; + int gpio_base; + + /* get gpio base */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); + gpio_base = lo & 0xff00; + + /* make cs5536 gpio13 output enable */ + val = inl(gpio_base + GPIOL_OUT_EN); + val &= ~(1 << (16 + 13)); + val |= (1 << 13); + outl(val, gpio_base + GPIOL_OUT_EN); + mmiowb(); + /* make cs5536 gpio13 output low level voltage. */ + val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13)); + val |= (1 << (16 + 13)); + outl(val, gpio_base + GPIOL_OUT_VAL); + mmiowb(); +} + +/* reset support for yeeloong2f and mengloong2f notebook */ + +void ml2f_reboot(void) +{ + reset_cpu(); + + /* sending an reset signal to EC(embedded controller) */ + ec_write(REG_RESET, BIT_RESET_ON); +} + +#define yl2f89_reboot ml2f_reboot + +/* menglong(7inches) laptop has different shutdown logic from 8.9inches */ +#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d +#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e +#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f +#define REG_SHUTDOWN_HIGH 0xFC +#define REG_SHUTDOWN_LOW 0x29 +#define BIT_SHUTDOWN_ON (1 << 1) + +static void ml2f_shutdown(void) +{ + u8 val; + u64 i; + + outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH); + outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW); + mmiowb(); + val = inb(EC_SHUTDOWN_IO_PORT_DATA); + outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); + /* need enough wait here... how many microseconds needs? */ + for (i = 0; i < 0x10000; i++) + delay(); + outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); +} + +static void yl2f89_shutdown(void) +{ + /* cpu-gpio0 output low */ + LOONGSON_GPIODATA &= ~0x00000001; + /* cpu-gpio0 as output */ + LOONGSON_GPIOIE &= ~0x00000001; +} + +void mach_prepare_reboot(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_reboot(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_reboot(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_reboot(); + break; + default: + break; + } +} + +void mach_prepare_shutdown(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_shutdown(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_shutdown(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_shutdown(); + break; + default: + break; + } +} diff --git a/trunk/arch/mips/math-emu/cp1emu.c b/trunk/arch/mips/math-emu/cp1emu.c index 454b53924490..8f2f8e9d8b21 100644 --- a/trunk/arch/mips/math-emu/cp1emu.c +++ b/trunk/arch/mips/math-emu/cp1emu.c @@ -35,6 +35,7 @@ * better performance by compiling with -msoft-float! */ #include +#include #include #include @@ -68,7 +69,9 @@ static int fpux_emu(struct pt_regs *, /* Further private data for which no space exists in mips_fpu_struct */ -struct mips_fpu_emulator_stats fpuemustats; +#ifdef CONFIG_DEBUG_FS +DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); +#endif /* Control registers */ @@ -209,7 +212,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) unsigned int cond; if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -240,7 +243,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) return SIGILL; } if (get_user(ir, (mips_instruction __user *) emulpc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } /* __compute_return_epc() will have updated cp0_epc */ @@ -253,16 +256,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) } emul: - fpuemustats.emulated++; + MIPS_FPU_EMU_INC_STATS(emulated); switch (MIPSInst_OPCODE(ir)) { case ldc1_op:{ u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] + MIPSInst_SIMM(ir)); u64 val; - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } DITOREG(val, MIPSInst_RT(ir)); @@ -274,10 +277,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u64 val; - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_RT(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -288,9 +291,9 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u32 val; - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } SITOREG(val, MIPSInst_RT(ir)); @@ -302,10 +305,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPSInst_SIMM(ir)); u32 val; - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_RT(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -429,7 +432,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -595,7 +598,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, { unsigned rcsr = 0; /* resulting csr */ - fpuemustats.cp1xops++; + MIPS_FPU_EMU_INC_STATS(cp1xops); switch (MIPSInst_FMA_FFMT(ir)) { case s_fmt:{ /* 0 */ @@ -610,9 +613,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } SITOREG(val, MIPSInst_FD(ir)); @@ -622,11 +625,11 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_FS(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -687,9 +690,9 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.loads++; + MIPS_FPU_EMU_INC_STATS(loads); if (get_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } DITOREG(val, MIPSInst_FD(ir)); @@ -699,10 +702,10 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); - fpuemustats.stores++; + MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_FS(ir)); if (put_user(val, va)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } break; @@ -769,7 +772,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, #endif } rv; /* resulting value */ - fpuemustats.cp1ops++; + MIPS_FPU_EMU_INC_STATS(cp1ops); switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) { case s_fmt:{ /* 0 */ union { @@ -1240,7 +1243,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, prevepc = xcp->cp0_epc; if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } if (insn == 0) @@ -1276,33 +1279,50 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, } #ifdef CONFIG_DEBUG_FS + +static int fpuemu_stat_get(void *data, u64 *val) +{ + int cpu; + unsigned long sum = 0; + for_each_online_cpu(cpu) { + struct mips_fpu_emulator_stats *ps; + local_t *pv; + ps = &per_cpu(fpuemustats, cpu); + pv = (void *)ps + (unsigned long)data; + sum += local_read(pv); + } + *val = sum; + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n"); + extern struct dentry *mips_debugfs_dir; static int __init debugfs_fpuemu(void) { struct dentry *d, *dir; - int i; - static struct { - const char *name; - unsigned int *v; - } vars[] __initdata = { - { "emulated", &fpuemustats.emulated }, - { "loads", &fpuemustats.loads }, - { "stores", &fpuemustats.stores }, - { "cp1ops", &fpuemustats.cp1ops }, - { "cp1xops", &fpuemustats.cp1xops }, - { "errors", &fpuemustats.errors }, - }; if (!mips_debugfs_dir) return -ENODEV; dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); if (!dir) return -ENOMEM; - for (i = 0; i < ARRAY_SIZE(vars); i++) { - d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v); - if (!d) - return -ENOMEM; - } + +#define FPU_STAT_CREATE(M) \ + do { \ + d = debugfs_create_file(#M , S_IRUGO, dir, \ + (void *)offsetof(struct mips_fpu_emulator_stats, M), \ + &fops_fpuemu_stat); \ + if (!d) \ + return -ENOMEM; \ + } while (0) + + FPU_STAT_CREATE(emulated); + FPU_STAT_CREATE(loads); + FPU_STAT_CREATE(stores); + FPU_STAT_CREATE(cp1ops); + FPU_STAT_CREATE(cp1xops); + FPU_STAT_CREATE(errors); + return 0; } __initcall(debugfs_fpuemu); diff --git a/trunk/arch/mips/math-emu/dsemul.c b/trunk/arch/mips/math-emu/dsemul.c index df7b9d928efc..36d975ae08f8 100644 --- a/trunk/arch/mips/math-emu/dsemul.c +++ b/trunk/arch/mips/math-emu/dsemul.c @@ -98,7 +98,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) err |= __put_user(cpc, &fr->epc); if (unlikely(err)) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return SIGBUS; } @@ -136,7 +136,7 @@ int do_dsemulret(struct pt_regs *xcp) err |= __get_user(cookie, &fr->cookie); if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) { - fpuemustats.errors++; + MIPS_FPU_EMU_INC_STATS(errors); return 0; } diff --git a/trunk/arch/mips/mipssim/Makefile b/trunk/arch/mips/mipssim/Makefile index 57f43c1c7882..41b96571315e 100644 --- a/trunk/arch/mips/mipssim/Makefile +++ b/trunk/arch/mips/mipssim/Makefile @@ -17,8 +17,7 @@ # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # -obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \ - sim_cmdline.o +obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o obj-$(CONFIG_EARLY_PRINTK) += sim_console.o obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o diff --git a/trunk/arch/mips/mipssim/sim_setup.c b/trunk/arch/mips/mipssim/sim_setup.c index 2877675c5f0d..0824f6af4777 100644 --- a/trunk/arch/mips/mipssim/sim_setup.c +++ b/trunk/arch/mips/mipssim/sim_setup.c @@ -61,7 +61,6 @@ void __init prom_init(void) set_io_port_base(0xbfd00000); pr_info("\nLINUX started...\n"); - prom_init_cmdline(); prom_meminit(); #ifdef CONFIG_MIPS_MT_SMP diff --git a/trunk/arch/mips/mm/cerr-sb1.c b/trunk/arch/mips/mm/cerr-sb1.c index 1bd1f18ac23c..3571090ba178 100644 --- a/trunk/arch/mips/mm/cerr-sb1.c +++ b/trunk/arch/mips/mm/cerr-sb1.c @@ -567,13 +567,10 @@ static uint32_t extract_dc(unsigned short addr, int data) datalo = ((unsigned long long)datalohi << 32) | datalolo; ecc = dc_ecc(datalo); if (ecc != datahi) { - int bits = 0; + int bits; bad_ecc |= 1 << (3-offset); ecc ^= datahi; - while (ecc) { - if (ecc & 1) bits++; - ecc >>= 1; - } + bits = hweight8(ecc); res |= (bits == 1) ? CP0_CERRD_DATA_SBE : CP0_CERRD_DATA_DBE; } printk(" %02X-%016llX", datahi, datalo); diff --git a/trunk/arch/mips/mm/init.c b/trunk/arch/mips/mm/init.c index 8d1f4f363049..9e8d00389eef 100644 --- a/trunk/arch/mips/mm/init.c +++ b/trunk/arch/mips/mm/init.c @@ -462,7 +462,9 @@ void __init_refok free_initmem(void) __pa_symbol(&__init_end)); } +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT unsigned long pgd_current[NR_CPUS]; +#endif /* * On 64-bit we've got three-level pagetables with a slightly * different layout ... diff --git a/trunk/arch/mips/mm/tlbex.c b/trunk/arch/mips/mm/tlbex.c index bb1719a55d22..3d0baa4a842d 100644 --- a/trunk/arch/mips/mm/tlbex.c +++ b/trunk/arch/mips/mm/tlbex.c @@ -160,6 +160,12 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT +/* + * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current, + * we cannot do r3000 under these circumstances. + */ + /* * The R3000 TLB handler is simple. */ @@ -199,6 +205,7 @@ static void __cpuinit build_r3000_tlb_refill_handler(void) dump_handler((u32 *)ebase, 32); } +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ /* * The R4000 TLB handler is much more complicated. We have two @@ -497,8 +504,9 @@ static void __cpuinit build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, unsigned int tmp, unsigned int ptr) { +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT long pgdc = (long)pgd_current; - +#endif /* * The vmalloc handling is not in the hotpath. */ @@ -506,7 +514,15 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, uasm_il_bltz(p, r, tmp, label_vmalloc); /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ -#ifdef CONFIG_SMP +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT + /* + * &pgd << 11 stored in CONTEXT [23..63]. + */ + UASM_i_MFC0(p, ptr, C0_CONTEXT); + uasm_i_dins(p, ptr, 0, 0, 23); /* Clear lower 23 bits of context. */ + uasm_i_ori(p, ptr, ptr, 0x540); /* 1 0 1 0 1 << 6 xkphys cached */ + uasm_i_drotr(p, ptr, ptr, 11); +#elif defined(CONFIG_SMP) # ifdef CONFIG_MIPS_MT_SMTC /* * SMTC uses TCBind value as "CPU" index @@ -520,7 +536,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, */ uasm_i_dmfc0(p, ptr, C0_CONTEXT); uasm_i_dsrl(p, ptr, ptr, 23); -#endif +# endif UASM_i_LA_mostly(p, tmp, pgdc); uasm_i_daddu(p, ptr, ptr, tmp); uasm_i_dmfc0(p, tmp, C0_BADVADDR); @@ -1033,6 +1049,7 @@ build_pte_modifiable(u32 **p, struct uasm_reloc **r, iPTE_LW(p, pte, ptr); } +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT /* * R3000 style TLB load/store/modify handlers. */ @@ -1184,6 +1201,7 @@ static void __cpuinit build_r3000_tlb_modify_handler(void) dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm)); } +#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ /* * R4000 style TLB load/store/modify handlers. @@ -1400,6 +1418,7 @@ void __cpuinit build_tlb_refill_handler(void) case CPU_TX3912: case CPU_TX3922: case CPU_TX3927: +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT build_r3000_tlb_refill_handler(); if (!run_once) { build_r3000_tlb_load_handler(); @@ -1407,6 +1426,9 @@ void __cpuinit build_tlb_refill_handler(void) build_r3000_tlb_modify_handler(); run_once++; } +#else + panic("No R3000 TLB refill handler"); +#endif break; case CPU_R6000: diff --git a/trunk/arch/mips/mm/uasm.c b/trunk/arch/mips/mm/uasm.c index f467199676a8..0a165c5179a1 100644 --- a/trunk/arch/mips/mm/uasm.c +++ b/trunk/arch/mips/mm/uasm.c @@ -60,11 +60,11 @@ enum opcode { insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl, insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, - insn_dsrl32, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, - insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, + insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal, + insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll, insn_sra, insn_srl, insn_subu, insn_sw, - insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori + insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins }; struct insn { @@ -104,6 +104,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE }, { insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE }, { insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE }, + { insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE }, { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD }, { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 }, { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM }, @@ -132,6 +133,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 }, { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD }, { insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM }, + { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE }, { insn_invalid, 0, 0 } }; @@ -304,6 +306,12 @@ Ip_u2u1s3(op) \ build_insn(buf, insn##op, b, a, c); \ } +#define I_u2u1msbu3(op) \ +Ip_u2u1msbu3(op) \ +{ \ + build_insn(buf, insn##op, b, a, c+d-1, c); \ +} + #define I_u1u2(op) \ Ip_u1u2(op) \ { \ @@ -349,6 +357,7 @@ I_u2u1u3(_dsll32) I_u2u1u3(_dsra) I_u2u1u3(_dsrl) I_u2u1u3(_dsrl32) +I_u2u1u3(_drotr) I_u3u1u2(_dsubu) I_0(_eret) I_u1(_j) @@ -377,6 +386,7 @@ I_0(_tlbwi) I_0(_tlbwr) I_u3u1u2(_xor) I_u2u1u3(_xori) +I_u2u1msbu3(_dins); /* Handle labels. */ void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid) diff --git a/trunk/arch/mips/mm/uasm.h b/trunk/arch/mips/mm/uasm.h index c6d1e3dd82d4..3d153edaa51e 100644 --- a/trunk/arch/mips/mm/uasm.h +++ b/trunk/arch/mips/mm/uasm.h @@ -34,6 +34,11 @@ uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c) void __cpuinit \ uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c) +#define Ip_u2u1msbu3(op) \ +void __cpuinit \ +uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c, \ + unsigned int d) + #define Ip_u1u2(op) \ void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b) @@ -65,6 +70,7 @@ Ip_u2u1u3(_dsll32); Ip_u2u1u3(_dsra); Ip_u2u1u3(_dsrl); Ip_u2u1u3(_dsrl32); +Ip_u2u1u3(_drotr); Ip_u3u1u2(_dsubu); Ip_0(_eret); Ip_u1(_j); @@ -93,6 +99,7 @@ Ip_0(_tlbwi); Ip_0(_tlbwr); Ip_u3u1u2(_xor); Ip_u2u1u3(_xori); +Ip_u2u1msbu3(_dins); /* Handle labels. */ struct uasm_label { diff --git a/trunk/arch/mips/mti-malta/malta-memory.c b/trunk/arch/mips/mti-malta/malta-memory.c index 9035c64bc5ed..b27419c84919 100644 --- a/trunk/arch/mips/mti-malta/malta-memory.c +++ b/trunk/arch/mips/mti-malta/malta-memory.c @@ -55,7 +55,7 @@ static struct prom_pmemblock * __init prom_getmdesc(void) char *memsize_str; unsigned int memsize; char *ptr; - static char cmdline[CL_SIZE] __initdata; + static char cmdline[COMMAND_LINE_SIZE] __initdata; /* otherwise look in the environment */ memsize_str = prom_getenv("memsize"); diff --git a/trunk/arch/mips/nxp/pnx833x/common/interrupts.c b/trunk/arch/mips/nxp/pnx833x/common/interrupts.c index 30533ba200e2..3a467c04f811 100644 --- a/trunk/arch/mips/nxp/pnx833x/common/interrupts.c +++ b/trunk/arch/mips/nxp/pnx833x/common/interrupts.c @@ -295,7 +295,7 @@ static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) } static struct irq_chip pnx833x_pic_irq_type = { - .typename = "PNX-PIC", + .name = "PNX-PIC", .startup = pnx833x_startup_pic_irq, .shutdown = pnx833x_shutdown_pic_irq, .enable = pnx833x_enable_pic_irq, @@ -305,7 +305,7 @@ static struct irq_chip pnx833x_pic_irq_type = { }; static struct irq_chip pnx833x_gpio_irq_type = { - .typename = "PNX-GPIO", + .name = "PNX-GPIO", .startup = pnx833x_startup_gpio_irq, .shutdown = pnx833x_disable_gpio_irq, .enable = pnx833x_enable_gpio_irq, diff --git a/trunk/arch/mips/oprofile/op_model_loongson2.c b/trunk/arch/mips/oprofile/op_model_loongson2.c index 575cd1473475..475ff46712ab 100644 --- a/trunk/arch/mips/oprofile/op_model_loongson2.c +++ b/trunk/arch/mips/oprofile/op_model_loongson2.c @@ -1,7 +1,7 @@ /* * Loongson2 performance counter driver for oprofile * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Yanhua * Author: Wu Zhangjin * @@ -125,6 +125,9 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) */ /* Check whether the irq belongs to me */ + enabled = read_c0_perfcnt() & LOONGSON2_PERFCNT_INT_EN; + if (!enabled) + return IRQ_NONE; enabled = reg.cnt1_enabled | reg.cnt2_enabled; if (!enabled) return IRQ_NONE; diff --git a/trunk/arch/mips/pci/Makefile b/trunk/arch/mips/pci/Makefile index 91bfe73a7f60..c9209ca6c8e7 100644 --- a/trunk/arch/mips/pci/Makefile +++ b/trunk/arch/mips/pci/Makefile @@ -22,13 +22,13 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ # # These are still pretty much in the old state, watch, go blind. # -obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o -obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-bonito64.o +obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o +obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/trunk/arch/mips/pci/fixup-excite.c b/trunk/arch/mips/pci/fixup-excite.c deleted file mode 100644 index cd64d9f177c4..000000000000 --- a/trunk/arch/mips/pci/fixup-excite.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (pin == 0) - return -1; - - return USB_IRQ; /* USB controller is the only PCI device */ -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/trunk/arch/mips/pci/fixup-fuloong2e.c b/trunk/arch/mips/pci/fixup-fuloong2e.c index 0c4c7a81213f..4f6d8da07f93 100644 --- a/trunk/arch/mips/pci/fixup-fuloong2e.c +++ b/trunk/arch/mips/pci/fixup-fuloong2e.c @@ -13,7 +13,8 @@ */ #include #include -#include + +#include /* South bridge slot number is set by the pci probe process */ static u8 sb_slot = 5; @@ -35,7 +36,7 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) break; } } else { - irq = BONITO_IRQ_BASE + 25 + pin; + irq = LOONGSON_IRQ_BASE + 25 + pin; } return irq; diff --git a/trunk/arch/mips/pci/fixup-lemote2f.c b/trunk/arch/mips/pci/fixup-lemote2f.c new file mode 100644 index 000000000000..caf2edeb02f0 --- /dev/null +++ b/trunk/arch/mips/pci/fixup-lemote2f.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2008 Lemote Technology + * Copyright (C) 2004 ICT CAS + * Author: Li xiaoyu, lixy@ict.ac.cn + * + * Copyright (C) 2007 Lemote, Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include + +#include +#include +#include + +/* PCI interrupt pins + * + * These should not be changed, or you should consider loongson2f interrupt + * register and your pci card dispatch + */ + +#define PCIA 4 +#define PCIB 5 +#define PCIC 6 +#define PCID 7 + +/* all the pci device has the PCIA pin, check the datasheet. */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0}, /* 11: Unused */ + {0, 0, 0, 0, 0}, /* 12: Unused */ + {0, 0, 0, 0, 0}, /* 13: Unused */ + {0, 0, 0, 0, 0}, /* 14: Unused */ + {0, 0, 0, 0, 0}, /* 15: Unused */ + {0, 0, 0, 0, 0}, /* 16: Unused */ + {0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */ + {0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */ + {0, PCIC, 0, 0, 0}, /* 19: SiI3114 */ + {0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */ + {0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */ + {0, 0, 0, 0, 0}, /* 22: Unused */ + {0, 0, 0, 0, 0}, /* 23: Unused */ + {0, 0, 0, 0, 0}, /* 24: Unused */ + {0, 0, 0, 0, 0}, /* 25: Unused */ + {0, 0, 0, 0, 0}, /* 26: Unused */ + {0, 0, 0, 0, 0}, /* 27: Unused */ +}; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int virq; + + if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536) + && (PCI_SLOT(dev->devfn) < 32)) { + virq = irq_tab[slot][pin]; + printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin, + virq + LOONGSON_IRQ_BASE); + if (virq != 0) + return LOONGSON_IRQ_BASE + virq; + else + return 0; + } else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */ + switch (PCI_FUNC(dev->devfn)) { + case 2: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_IDE_INTR); + return CS5536_IDE_INTR; /* for IDE */ + case 3: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_ACC_INTR); + return CS5536_ACC_INTR; /* for AUDIO */ + case 4: /* for OHCI */ + case 5: /* for EHCI */ + case 6: /* for UDC */ + case 7: /* for OTG */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_USB_INTR); + return CS5536_USB_INTR; + } + return dev->irq; + } else { + printk(KERN_INFO " strange pci slot number.\n"); + return 0; + } +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* CS5536 SPEC. fixup */ +static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev) +{ + /* the uart1 and uart2 interrupt in PIC is enabled as default */ + pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1); + pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1); +} + +static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev) +{ + /* setting the mutex pin as IDE function */ + pci_write_config_dword(pdev, PCI_IDE_CFG_REG, + CS5536_IDE_FLASH_SIGNATURE); +} + +static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) +{ + /* enable the AUDIO interrupt in PIC */ + pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1); + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0); +} + +static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev) +{ + /* enable the OHCI interrupt in PIC */ + /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */ + pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1); +} + +static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) +{ + u32 hi, lo; + + /* Serial short detect enable */ + _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo); + _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo); + + /* setting the USB2.0 micro frame length */ + pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); +} + +static void __init loongson_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + pci_read_config_dword(pdev, 0xe0, &val); + /* Only 2 port be used */ + pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, + loongson_cs5536_isa_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC, + loongson_cs5536_ohci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC, + loongson_cs5536_ehci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO, + loongson_cs5536_acc_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, + loongson_cs5536_ide_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + loongson_nec_fixup); diff --git a/trunk/arch/mips/pci/ops-bonito64.c b/trunk/arch/mips/pci/ops-bonito64.c index 54e55e7a2431..1b3e03f20c54 100644 --- a/trunk/arch/mips/pci/ops-bonito64.c +++ b/trunk/arch/mips/pci/ops-bonito64.c @@ -29,13 +29,8 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -#ifdef CONFIG_LEMOTE_FULOONG2E -#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset)) -#define ID_SEL_BEGIN 11 -#else #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset)) #define ID_SEL_BEGIN 10 -#endif #define MAX_DEV_NUM (31 - ID_SEL_BEGIN) @@ -77,10 +72,8 @@ static int bonito64_pcibios_config_access(unsigned char access_type, addrp = CFG_SPACE_REG(addr & 0xffff); if (access_type == PCI_ACCESS_WRITE) { writel(cpu_to_le32(*data), addrp); -#ifndef CONFIG_LEMOTE_FULOONG2E /* Wait till done */ while (BONITO_PCIMSTAT & 0xF); -#endif } else { *data = le32_to_cpu(readl(addrp)); } diff --git a/trunk/arch/mips/pci/ops-loongson2.c b/trunk/arch/mips/pci/ops-loongson2.c new file mode 100644 index 000000000000..aa5d3da27212 --- /dev/null +++ b/trunk/arch/mips/pci/ops-loongson2.c @@ -0,0 +1,208 @@ +/* + * fuloong2e specific PCI support. + * + * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include + +#include + +#ifdef CONFIG_CS5536 +#include +#include +#endif + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#define CFG_SPACE_REG(offset) \ + (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset)) +#define ID_SEL_BEGIN 11 +#define MAX_DEV_NUM (31 - ID_SEL_BEGIN) + + +static int loongson_pcibios_config_access(unsigned char access_type, + struct pci_bus *bus, + unsigned int devfn, int where, + u32 *data) +{ + u32 busnum = bus->number; + u32 addr, type; + u32 dummy; + void *addrp; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int reg = where & ~3; + + if (busnum == 0) { + /* board-specific part,currently,only fuloong2f,yeeloong2f + * use CS5536, fuloong2e use via686b, gdium has no + * south bridge + */ +#ifdef CONFIG_CS5536 + /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to + * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO, + * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it + * will not go this branch, but the others. so, no calling dead + * loop here. + */ + if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) { + switch (access_type) { + case PCI_ACCESS_READ: + *data = cs5536_pci_conf_read4(function, reg); + break; + case PCI_ACCESS_WRITE: + cs5536_pci_conf_write4(function, reg, *data); + break; + } + return 0; + } +#endif + /* Type 0 configuration for onboard PCI bus */ + if (device > MAX_DEV_NUM) + return -1; + + addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg; + type = 0; + } else { + /* Type 1 configuration for offboard PCI bus */ + addr = (busnum << 16) | (device << 11) | (function << 8) | reg; + type = 0x10000; + } + + /* Clear aborts */ + LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \ + LOONGSON_PCICMD_MTABORT_CLR; + + LOONGSON_PCIMAP_CFG = (addr >> 16) | type; + + /* Flush Bonito register block */ + dummy = LOONGSON_PCIMAP_CFG; + mmiowb(); + + addrp = CFG_SPACE_REG(addr & 0xffff); + if (access_type == PCI_ACCESS_WRITE) + writel(cpu_to_le32(*data), addrp); + else + *data = le32_to_cpu(readl(addrp)); + + /* Detect Master/Target abort */ + if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR | + LOONGSON_PCICMD_MTABORT_CLR)) { + /* Error occurred */ + + /* Clear bits */ + LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR | + LOONGSON_PCICMD_MTABORT_CLR); + + return -1; + } + + return 0; + +} + + +/* + * We can't address 8 and 16 bit words directly. Instead we have to + * read/write a 32bit word and mask/modify the data we actually want. + */ +static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, + &data)) + return -1; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (size == 4) + data = val; + else { + if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + } + + if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where, + &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops loongson_pci_ops = { + .read = loongson_pcibios_read, + .write = loongson_pcibios_write +}; + +#ifdef CONFIG_CS5536 +void _rdmsr(u32 msr, u32 *hi, u32 *lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_rdmsr); + +void _wrmsr(u32 msr, u32 hi, u32 lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_wrmsr); +#endif diff --git a/trunk/arch/mips/pci/pci-excite.c b/trunk/arch/mips/pci/pci-excite.c deleted file mode 100644 index 8a56876afcc6..000000000000 --- a/trunk/arch/mips/pci/pci-excite.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include - - -extern struct pci_ops titan_pci_ops; - - -static struct resource - mem_resource = { - .name = "PCI memory", - .start = EXCITE_PHYS_PCI_MEM, - .end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1, - .flags = IORESOURCE_MEM - }, - io_resource = { - .name = "PCI I/O", - .start = EXCITE_PHYS_PCI_IO, - .end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1, - .flags = IORESOURCE_IO - }; - - -static struct pci_controller bx_controller = { - .pci_ops = &titan_pci_ops, - .mem_resource = &mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &io_resource, - .io_offset = 0x00000000UL -}; - - -static char - iopage_failed[] __initdata = "Cannot allocate PCI I/O page", - modebits_no_pci[] __initdata = "PCI is not configured in mode bits"; - -#define RM9000x2_OCD_HTSC 0x0604 -#define RM9000x2_OCD_HTBHL 0x060c -#define RM9000x2_OCD_PCIHRST 0x078c - -#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */ -#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */ - -#define PCISC_FB2B 0x00000200 -#define PCISC_MWICG 0x00000010 -#define PCISC_EMC 0x00000004 -#define PCISC_ERMA 0x00000002 - - - -static int __init basler_excite_pci_setup(void) -{ - const unsigned int fullbars = memsize / (256 << 20); - unsigned int i; - - /* Check modebits to see if PCI is really enabled. */ - if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1)) - panic(modebits_no_pci); - - if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO, - "Memory-mapped PCI I/O page")) - panic(iopage_failed); - - /* Enable PCI 0 as master for config cycles */ - ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC); - - - /* Set up latency timer */ - ocd_writel(0x8008, RM9000x2_OCD_HTBHL); - - /* Setup host IO and Memory space */ - ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7); - ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7); - ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8); - ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8); - - /* Set up PCI BARs to map all installed memory */ - for (i = 0; i < 6; i++) { - const unsigned int bar = 0x610 + i * 4; - - if (i < fullbars) { - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x0ffff029, bar + 0x100); - continue; - } - - if (i == fullbars) { - int o; - u32 mask; - - const unsigned long rem = memsize - i * 0x10000000; - if (!rem) { - ocd_writel(0x00000000, bar + 0x100); - continue; - } - - o = ffs(rem) - 1; - if (rem & ~(0x1 << o)) - o++; - mask = ((0x1 << o) & 0x0ffff000) - 0x1000; - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x00000029 | mask, bar + 0x100); - continue; - } - - ocd_writel(0x00000000, bar + 0x100); - } - - /* Finally, enable the PCI interrupt */ -#if USB_IRQ > 7 - set_c0_intcontrol(1 << USB_IRQ); -#else - set_c0_status(1 << (USB_IRQ + 8)); -#endif - - ioport_resource.start = EXCITE_PHYS_PCI_IO; - ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1; - set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO)); - register_pci_controller(&bx_controller); - return 0; -} - - -arch_initcall(basler_excite_pci_setup); diff --git a/trunk/arch/mips/powertv/Kconfig b/trunk/arch/mips/powertv/Kconfig new file mode 100644 index 000000000000..ff0e7e3e6954 --- /dev/null +++ b/trunk/arch/mips/powertv/Kconfig @@ -0,0 +1,21 @@ +source "arch/mips/powertv/asic/Kconfig" + +config BOOTLOADER_DRIVER + bool "PowerTV Bootloader Driver Support" + default n + depends on POWERTV + help + Use this option if you want to load bootloader driver. + +config BOOTLOADER_FAMILY + string "POWERTV Bootloader Family string" + default "85" + depends on POWERTV && !BOOTLOADER_DRIVER + help + This value should be specified when the bootloader driver is disabled + and must be exactly two characters long. Families supported are: + R1 - RNG-100 R2 - RNG-200 + A1 - Class A B1 - Class B + E1 - Class E F1 - Class F + 44 - 45xx 46 - 46xx + 85 - 85xx 86 - 86xx diff --git a/trunk/arch/mips/powertv/Makefile b/trunk/arch/mips/powertv/Makefile new file mode 100644 index 000000000000..2c516718affe --- /dev/null +++ b/trunk/arch/mips/powertv/Makefile @@ -0,0 +1,28 @@ +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. +# Portions copyright (C) 2009 Cisco Systems, Inc. +# +# This program is free software; you can distribute it and/or modify it +# under the terms of the GNU General Public License (Version 2) as +# published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +# +# Makefile for the Cisco PowerTV-specific kernel interface routines +# under Linux. +# + +obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/ + +EXTRA_CFLAGS += -Wall -Werror diff --git a/trunk/arch/mips/powertv/asic/Kconfig b/trunk/arch/mips/powertv/asic/Kconfig new file mode 100644 index 000000000000..2016bfe94d66 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/Kconfig @@ -0,0 +1,28 @@ +config MIN_RUNTIME_RESOURCES + bool "Support for minimum runtime resources" + default n + depends on POWERTV + help + Enables support for minimizing the number of (SA asic) runtime + resources that are preallocated by the kernel. + +config MIN_RUNTIME_DOCSIS + bool "Support for minimum DOCSIS resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated DOCSIS resource. + +config MIN_RUNTIME_PMEM + bool "Support for minimum PMEM resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated Memory resource. + +config MIN_RUNTIME_TFTP + bool "Support for minimum TFTP resource" + default y + depends on MIN_RUNTIME_RESOURCES + help + Enables support for the preallocated TFTP resource. diff --git a/trunk/arch/mips/powertv/asic/Makefile b/trunk/arch/mips/powertv/asic/Makefile new file mode 100644 index 000000000000..bebfdcff0443 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/Makefile @@ -0,0 +1,23 @@ +# +# Copyright (C) 2009 Scientific-Atlanta, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \ + irq_asic.o prealloc-calliope.o prealloc-cronus.o \ + prealloc-cronuslite.o prealloc-zeus.o + +EXTRA_CFLAGS += -Wall -Werror diff --git a/trunk/arch/mips/powertv/asic/asic-calliope.c b/trunk/arch/mips/powertv/asic/asic-calliope.c new file mode 100644 index 000000000000..03d3884c6270 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/asic-calliope.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Calliope ASIC. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + */ + +#include + +const struct register_map calliope_register_map = { + .eic_slow0_strt_add = 0x800000, + .eic_cfg_bits = 0x800038, + .eic_ready_status = 0x80004c, + + .chipver3 = 0xA00800, + .chipver2 = 0xA00804, + .chipver1 = 0xA00808, + .chipver0 = 0xA0080c, + + /* The registers of IRBlaster */ + .uart1_intstat = 0xA01800, + .uart1_inten = 0xA01804, + .uart1_config1 = 0xA01808, + .uart1_config2 = 0xA0180C, + .uart1_divisorhi = 0xA01810, + .uart1_divisorlo = 0xA01814, + .uart1_data = 0xA01818, + .uart1_status = 0xA0181C, + + .int_stat_3 = 0xA02800, + .int_stat_2 = 0xA02804, + .int_stat_1 = 0xA02808, + .int_stat_0 = 0xA0280c, + .int_config = 0xA02810, + .int_int_scan = 0xA02818, + .ien_int_3 = 0xA02830, + .ien_int_2 = 0xA02834, + .ien_int_1 = 0xA02838, + .ien_int_0 = 0xA0283c, + .int_level_3_3 = 0xA02880, + .int_level_3_2 = 0xA02884, + .int_level_3_1 = 0xA02888, + .int_level_3_0 = 0xA0288c, + .int_level_2_3 = 0xA02890, + .int_level_2_2 = 0xA02894, + .int_level_2_1 = 0xA02898, + .int_level_2_0 = 0xA0289c, + .int_level_1_3 = 0xA028a0, + .int_level_1_2 = 0xA028a4, + .int_level_1_1 = 0xA028a8, + .int_level_1_0 = 0xA028ac, + .int_level_0_3 = 0xA028b0, + .int_level_0_2 = 0xA028b4, + .int_level_0_1 = 0xA028b8, + .int_level_0_0 = 0xA028bc, + .int_docsis_en = 0xA028F4, + + .mips_pll_setup = 0x980000, + .usb_fs = 0x980030, /* -default 72800028- */ + .test_bus = 0x9800CC, + .crt_spare = 0x9800d4, + .usb2_ohci_int_mask = 0x9A000c, + .usb2_strap = 0x9A0014, + .ehci_hcapbase = 0x9BFE00, + .ohci_hc_revision = 0x9BFC00, + .bcm1_bs_lmi_steer = 0x9E0004, + .usb2_control = 0x9E0054, + .usb2_stbus_obc = 0x9BFF00, + .usb2_stbus_mess_size = 0x9BFF04, + .usb2_stbus_chunk_size = 0x9BFF08, + + .pcie_regs = 0x000000, /* -doesn't exist- */ + .tim_ch = 0xA02C10, + .tim_cl = 0xA02C14, + .gpio_dout = 0xA02c20, + .gpio_din = 0xA02c24, + .gpio_dir = 0xA02c2C, + .watchdog = 0xA02c30, + .front_panel = 0x000000, /* -not used- */ +}; diff --git a/trunk/arch/mips/powertv/asic/asic-cronus.c b/trunk/arch/mips/powertv/asic/asic-cronus.c new file mode 100644 index 000000000000..5f4589c9f83d --- /dev/null +++ b/trunk/arch/mips/powertv/asic/asic-cronus.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Cronus ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + */ + +#include + +const struct register_map cronus_register_map = { + .eic_slow0_strt_add = 0x000000, + .eic_cfg_bits = 0x000038, + .eic_ready_status = 0x00004C, + + .chipver3 = 0x2A0800, + .chipver2 = 0x2A0804, + .chipver1 = 0x2A0808, + .chipver0 = 0x2A080C, + + /* The registers of IRBlaster */ + .uart1_intstat = 0x2A1800, + .uart1_inten = 0x2A1804, + .uart1_config1 = 0x2A1808, + .uart1_config2 = 0x2A180C, + .uart1_divisorhi = 0x2A1810, + .uart1_divisorlo = 0x2A1814, + .uart1_data = 0x2A1818, + .uart1_status = 0x2A181C, + + .int_stat_3 = 0x2A2800, + .int_stat_2 = 0x2A2804, + .int_stat_1 = 0x2A2808, + .int_stat_0 = 0x2A280C, + .int_config = 0x2A2810, + .int_int_scan = 0x2A2818, + .ien_int_3 = 0x2A2830, + .ien_int_2 = 0x2A2834, + .ien_int_1 = 0x2A2838, + .ien_int_0 = 0x2A283C, + .int_level_3_3 = 0x2A2880, + .int_level_3_2 = 0x2A2884, + .int_level_3_1 = 0x2A2888, + .int_level_3_0 = 0x2A288C, + .int_level_2_3 = 0x2A2890, + .int_level_2_2 = 0x2A2894, + .int_level_2_1 = 0x2A2898, + .int_level_2_0 = 0x2A289C, + .int_level_1_3 = 0x2A28A0, + .int_level_1_2 = 0x2A28A4, + .int_level_1_1 = 0x2A28A8, + .int_level_1_0 = 0x2A28AC, + .int_level_0_3 = 0x2A28B0, + .int_level_0_2 = 0x2A28B4, + .int_level_0_1 = 0x2A28B8, + .int_level_0_0 = 0x2A28BC, + .int_docsis_en = 0x2A28F4, + + .mips_pll_setup = 0x1C0000, + .usb_fs = 0x1C0018, + .test_bus = 0x1C00CC, + .crt_spare = 0x1c00d4, + .usb2_ohci_int_mask = 0x20000C, + .usb2_strap = 0x200014, + .ehci_hcapbase = 0x21FE00, + .ohci_hc_revision = 0x1E0000, + .bcm1_bs_lmi_steer = 0x2E0008, + .usb2_control = 0x2E004C, + .usb2_stbus_obc = 0x21FF00, + .usb2_stbus_mess_size = 0x21FF04, + .usb2_stbus_chunk_size = 0x21FF08, + + .pcie_regs = 0x220000, + .tim_ch = 0x2A2C10, + .tim_cl = 0x2A2C14, + .gpio_dout = 0x2A2C20, + .gpio_din = 0x2A2C24, + .gpio_dir = 0x2A2C2C, + .watchdog = 0x2A2C30, + .front_panel = 0x2A3800, +}; diff --git a/trunk/arch/mips/powertv/asic/asic-zeus.c b/trunk/arch/mips/powertv/asic/asic-zeus.c new file mode 100644 index 000000000000..1469daab920e --- /dev/null +++ b/trunk/arch/mips/powertv/asic/asic-zeus.c @@ -0,0 +1,98 @@ +/* + * Locations of devices in the Zeus ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + */ + +#include + +const struct register_map zeus_register_map = { + .eic_slow0_strt_add = 0x000000, + .eic_cfg_bits = 0x000038, + .eic_ready_status = 0x00004c, + + .chipver3 = 0x280800, + .chipver2 = 0x280804, + .chipver1 = 0x280808, + .chipver0 = 0x28080c, + + /* The registers of IRBlaster */ + .uart1_intstat = 0x281800, + .uart1_inten = 0x281804, + .uart1_config1 = 0x281808, + .uart1_config2 = 0x28180C, + .uart1_divisorhi = 0x281810, + .uart1_divisorlo = 0x281814, + .uart1_data = 0x281818, + .uart1_status = 0x28181C, + + .int_stat_3 = 0x282800, + .int_stat_2 = 0x282804, + .int_stat_1 = 0x282808, + .int_stat_0 = 0x28280c, + .int_config = 0x282810, + .int_int_scan = 0x282818, + .ien_int_3 = 0x282830, + .ien_int_2 = 0x282834, + .ien_int_1 = 0x282838, + .ien_int_0 = 0x28283c, + .int_level_3_3 = 0x282880, + .int_level_3_2 = 0x282884, + .int_level_3_1 = 0x282888, + .int_level_3_0 = 0x28288c, + .int_level_2_3 = 0x282890, + .int_level_2_2 = 0x282894, + .int_level_2_1 = 0x282898, + .int_level_2_0 = 0x28289c, + .int_level_1_3 = 0x2828a0, + .int_level_1_2 = 0x2828a4, + .int_level_1_1 = 0x2828a8, + .int_level_1_0 = 0x2828ac, + .int_level_0_3 = 0x2828b0, + .int_level_0_2 = 0x2828b4, + .int_level_0_1 = 0x2828b8, + .int_level_0_0 = 0x2828bc, + .int_docsis_en = 0x2828F4, + + .mips_pll_setup = 0x1a0000, + .usb_fs = 0x1a0018, + .test_bus = 0x1a0238, + .crt_spare = 0x1a0090, + .usb2_ohci_int_mask = 0x1e000c, + .usb2_strap = 0x1e0014, + .ehci_hcapbase = 0x1FFE00, + .ohci_hc_revision = 0x1FFC00, + .bcm1_bs_lmi_steer = 0x2C0008, + .usb2_control = 0x2c01a0, + .usb2_stbus_obc = 0x1FFF00, + .usb2_stbus_mess_size = 0x1FFF04, + .usb2_stbus_chunk_size = 0x1FFF08, + + .pcie_regs = 0x200000, + .tim_ch = 0x282C10, + .tim_cl = 0x282C14, + .gpio_dout = 0x282c20, + .gpio_din = 0x282c24, + .gpio_dir = 0x282c2C, + .watchdog = 0x282c30, + .front_panel = 0x283800, +}; diff --git a/trunk/arch/mips/powertv/asic/asic_devices.c b/trunk/arch/mips/powertv/asic/asic_devices.c new file mode 100644 index 000000000000..bae82880b6b5 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/asic_devices.c @@ -0,0 +1,787 @@ +/* + * ASIC Device List Intialization + * + * Description: Defines the platform resources for the SA settop. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + * + * Description: Defines the platform resources for the SA settop. + * + * NOTE: The bootloader allocates persistent memory at an address which is + * 16 MiB below the end of the highest address in KSEG0. All fixed + * address memory reservations must avoid this region. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_BOOTLOADER_DRIVER +#include +#endif +#include + +#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) + +/* + * Forward Prototypes + */ +static void pmem_setup_resource(void); + +/* + * Global Variables + */ +enum asic_type asic; + +unsigned int platform_features; +unsigned int platform_family; +const struct register_map *register_map; +EXPORT_SYMBOL(register_map); /* Exported for testing */ +unsigned long asic_phy_base; +unsigned long asic_base; +EXPORT_SYMBOL(asic_base); /* Exported for testing */ +struct resource *gp_resources; +static bool usb_configured; + +/* + * Don't recommend to use it directly, it is usually used by kernel internally. + * Portable code should be using interfaces such as ioremp, dma_map_single, etc. + */ +unsigned long phys_to_bus_offset; +EXPORT_SYMBOL(phys_to_bus_offset); + +/* + * + * IO Resource Definition + * + */ + +struct resource asic_resource = { + .name = "ASIC Resource", + .start = 0, + .end = ASIC_IO_SIZE, + .flags = IORESOURCE_MEM, +}; + +/* + * + * USB Host Resource Definition + * + */ + +static struct resource ehci_resources[] = { + { + .parent = &asic_resource, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = irq_usbehci, + .end = irq_usbehci, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ehci_device = { + .name = "powertv-ehci", + .id = 0, + .num_resources = 2, + .resource = ehci_resources, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource ohci_resources[] = { + { + .parent = &asic_resource, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = irq_usbohci, + .end = irq_usbohci, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ohci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ohci_device = { + .name = "powertv-ohci", + .id = 0, + .num_resources = 2, + .resource = ohci_resources, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct platform_device *platform_devices[] = { + &ehci_device, + &ohci_device, +}; + +/* + * + * Platform Configuration and Device Initialization + * + */ +static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3) +{ + int en_prg, byp, pwr, nsb, val; + int sout; + + sout = 1; + en_prg = 1; + byp = 0; + nsb = 1; + pwr = 1; + + val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) | + (nsb<<1) | (disable_div_by_3<<5)); + + asic_write(val, usb_fs); + asic_write(val | (en_prg<<4), usb_fs); + asic_write(val | (en_prg<<4) | pwr, usb_fs); +} + +/* + * Allow override of bootloader-specified model + */ +static char __initdata cmdline[COMMAND_LINE_SIZE]; + +#define FORCEFAMILY_PARAM "forcefamily" + +static __init int check_forcefamily(unsigned char forced_family[2]) +{ + const char *p; + + forced_family[0] = '\0'; + forced_family[1] = '\0'; + + /* Check the command line for a forcefamily directive */ + strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1); + p = strstr(cmdline, FORCEFAMILY_PARAM); + if (p && (p != cmdline) && (*(p - 1) != ' ')) + p = strstr(p, " " FORCEFAMILY_PARAM "="); + + if (p) { + p += strlen(FORCEFAMILY_PARAM "="); + + if (*p == '\0' || *(p + 1) == '\0' || + (*(p + 2) != '\0' && *(p + 2) != ' ')) + pr_err(FORCEFAMILY_PARAM " must be exactly two " + "characters long, ignoring value\n"); + + else { + forced_family[0] = *p; + forced_family[1] = *(p + 1); + } + } + + return 0; +} + +/* + * platform_set_family - determine major platform family type. + * + * Returns family type; -1 if none + * Returns the family type; -1 if none + * + */ +static __init noinline void platform_set_family(void) +{ +#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) + + unsigned char forced_family[2]; + unsigned short bootldr_family; + + check_forcefamily(forced_family); + + if (forced_family[0] != '\0' && forced_family[1] != '\0') + bootldr_family = BOOTLDRFAMILY(forced_family[0], + forced_family[1]); + else { + +#ifdef CONFIG_BOOTLOADER_DRIVER + bootldr_family = (unsigned short) kbldr_GetSWFamily(); +#else +#if defined(CONFIG_BOOTLOADER_FAMILY) + bootldr_family = (unsigned short) BOOTLDRFAMILY( + CONFIG_BOOTLOADER_FAMILY[0], + CONFIG_BOOTLOADER_FAMILY[1]); +#else +#error "Unknown Bootloader Family" +#endif +#endif + } + + pr_info("Bootloader Family = 0x%04X\n", bootldr_family); + + switch (bootldr_family) { + case BOOTLDRFAMILY('R', '1'): + platform_family = FAMILY_1500; + break; + case BOOTLDRFAMILY('4', '4'): + platform_family = FAMILY_4500; + break; + case BOOTLDRFAMILY('4', '6'): + platform_family = FAMILY_4600; + break; + case BOOTLDRFAMILY('A', '1'): + platform_family = FAMILY_4600VZA; + break; + case BOOTLDRFAMILY('8', '5'): + platform_family = FAMILY_8500; + break; + case BOOTLDRFAMILY('R', '2'): + platform_family = FAMILY_8500RNG; + break; + case BOOTLDRFAMILY('8', '6'): + platform_family = FAMILY_8600; + break; + case BOOTLDRFAMILY('B', '1'): + platform_family = FAMILY_8600VZB; + break; + case BOOTLDRFAMILY('E', '1'): + platform_family = FAMILY_1500VZE; + break; + case BOOTLDRFAMILY('F', '1'): + platform_family = FAMILY_1500VZF; + break; + default: + platform_family = -1; + } +} + +unsigned int platform_get_family(void) +{ + return platform_family; +} +EXPORT_SYMBOL(platform_get_family); + +/* + * \brief usb_eye_configure() for optimizing the USB eye on Calliope. + * + * \param unsigned int value saved to the register. + * + * \return none + * + */ +static void __init usb_eye_configure(unsigned int value) +{ + asic_write(asic_read(crt_spare) | value, crt_spare); +} + +/* + * platform_get_asic - determine the ASIC type. + * + * \param none + * + * \return ASIC type; ASIC_UNKNOWN if none + * + */ +enum asic_type platform_get_asic(void) +{ + return asic; +} +EXPORT_SYMBOL(platform_get_asic); + +/* + * platform_configure_usb - usb configuration based on platform type. + * @bcm1_usb2_ctl: value for the BCM1_USB2_CTL register, which is + * quirky + */ +static void __init platform_configure_usb(void) +{ + u32 bcm1_usb2_ctl; + + if (usb_configured) + return; + + switch (asic) { + case ASIC_ZEUS: + fs_update(0x0000, 0x11, 0x02, 0); + bcm1_usb2_ctl = 0x803; + break; + + case ASIC_CRONUS: + case ASIC_CRONUSLITE: + fs_update(0x0000, 0x11, 0x02, 0); + bcm1_usb2_ctl = 0x803; + break; + + case ASIC_CALLIOPE: + fs_update(0x0000, 0x11, 0x02, 1); + + switch (platform_family) { + case FAMILY_1500VZE: + break; + + case FAMILY_1500VZF: + usb_eye_configure(0x003c0000); + break; + + default: + usb_eye_configure(0x00300000); + break; + } + + bcm1_usb2_ctl = 0x803; + break; + + default: + pr_err("Unknown ASIC type: %d\n", asic); + break; + } + + /* turn on USB power */ + asic_write(0, usb2_strap); + /* Enable all OHCI interrupts */ + asic_write(bcm1_usb2_ctl, usb2_control); + /* USB2_STBUS_OBC store32/load32 */ + asic_write(3, usb2_stbus_obc); + /* USB2_STBUS_MESS_SIZE 2 packets */ + asic_write(1, usb2_stbus_mess_size); + /* USB2_STBUS_CHUNK_SIZE 2 packets */ + asic_write(1, usb2_stbus_chunk_size); + + usb_configured = true; +} + +/* + * Set up the USB EHCI interface + */ +void platform_configure_usb_ehci() +{ + platform_configure_usb(); +} + +/* + * Set up the USB OHCI interface + */ +void platform_configure_usb_ohci() +{ + platform_configure_usb(); +} + +/* + * Shut the USB EHCI interface down--currently a NOP + */ +void platform_unconfigure_usb_ehci() +{ +} + +/* + * Shut the USB OHCI interface down--currently a NOP + */ +void platform_unconfigure_usb_ohci() +{ +} + +/** + * configure_platform - configuration based on platform type. + */ +void __init configure_platform(void) +{ + platform_set_family(); + + switch (platform_family) { + case FAMILY_1500: + case FAMILY_1500VZE: + case FAMILY_1500VZF: + platform_features = FFS_CAPABLE; + asic = ASIC_CALLIOPE; + asic_phy_base = CALLIOPE_IO_BASE; + register_map = &calliope_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + + if (platform_family == FAMILY_1500VZE) { + gp_resources = non_dvr_vze_calliope_resources; + pr_info("Platform: 1500/Vz Class E - " + "CALLIOPE, NON_DVR_CAPABLE\n"); + } else if (platform_family == FAMILY_1500VZF) { + gp_resources = non_dvr_vzf_calliope_resources; + pr_info("Platform: 1500/Vz Class F - " + "CALLIOPE, NON_DVR_CAPABLE\n"); + } else { + gp_resources = non_dvr_calliope_resources; + pr_info("Platform: 1500/RNG100 - CALLIOPE, " + "NON_DVR_CAPABLE\n"); + } + break; + + case FAMILY_4500: + platform_features = FFS_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_ZEUS; + asic_phy_base = ZEUS_IO_BASE; + register_map = &zeus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_zeus_resources; + + pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); + break; + + case FAMILY_4600: + { + unsigned int chipversion = 0; + + /* The settop has PCIE but it isn't used, so don't advertise + * it*/ + platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; + asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */ + register_map = &cronus_register_map; /* same as Cronus */ + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_cronuslite_resources; + + /* ASIC version will determine if this is a real CronusLite or + * Castrati(Cronus) */ + chipversion = asic_read(chipver3) << 24; + chipversion |= asic_read(chipver2) << 16; + chipversion |= asic_read(chipver1) << 8; + chipversion |= asic_read(chipver0); + + if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11)) + asic = ASIC_CRONUS; + else + asic = ASIC_CRONUSLITE; + + pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " + "chipversion=0x%08X\n", + (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", + chipversion); + break; + } + case FAMILY_4600VZA: + platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; + asic = ASIC_CRONUS; + asic_phy_base = CRONUS_IO_BASE; + register_map = &cronus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = non_dvr_cronus_resources; + + pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); + break; + + case FAMILY_8500: + case FAMILY_8500RNG: + platform_features = DVR_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_ZEUS; + asic_phy_base = ZEUS_IO_BASE; + register_map = &zeus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = dvr_zeus_resources; + + pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); + break; + + case FAMILY_8600: + case FAMILY_8600VZB: + platform_features = DVR_CAPABLE | PCIE_CAPABLE | + DISPLAY_CAPABLE; + asic = ASIC_CRONUS; + asic_phy_base = CRONUS_IO_BASE; + register_map = &cronus_register_map; + asic_base = (unsigned long)ioremap_nocache(asic_phy_base, + ASIC_IO_SIZE); + gp_resources = dvr_cronus_resources; + + pr_info("Platform: 8600/Vz Class B - CRONUS, " + "DVR_CAPABLE\n"); + break; + + default: + pr_crit("Platform: UNKNOWN PLATFORM\n"); + break; + } + + switch (asic) { + case ASIC_ZEUS: + phys_to_bus_offset = 0x30000000; + break; + case ASIC_CALLIOPE: + phys_to_bus_offset = 0x10000000; + break; + case ASIC_CRONUSLITE: + /* Fall through */ + case ASIC_CRONUS: + /* + * TODO: We suppose 0x10000000 aliases into 0x20000000- + * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000- + * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000. + */ + phys_to_bus_offset = 0x10000000; + break; + default: + phys_to_bus_offset = 0x00000000; + break; + } +} + +/** + * platform_devices_init - sets up USB device resourse. + */ +static int __init platform_devices_init(void) +{ + pr_notice("%s: ----- Initializing USB resources -----\n", __func__); + + asic_resource.start = asic_phy_base; + asic_resource.end += asic_resource.start; + + ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase); + ehci_resources[0].end += ehci_resources[0].start; + + ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision); + ohci_resources[0].end += ohci_resources[0].start; + + set_io_port_base(0); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + return 0; +} + +arch_initcall(platform_devices_init); + +/* + * + * BOOTMEM ALLOCATION + * + */ +/* + * Allocates/reserves the Platform memory resources early in the boot process. + * This ignores any resources that are designated IORESOURCE_IO + */ +void __init platform_alloc_bootmem(void) +{ + int i; + int total = 0; + + /* Get persistent memory data from command line before allocating + * resources. This need to happen before normal command line parsing + * has been done */ + pmem_setup_resource(); + + /* Loop through looking for resources that want a particular address */ + for (i = 0; gp_resources[i].flags != 0; i++) { + int size = gp_resources[i].end - gp_resources[i].start + 1; + if ((gp_resources[i].start != 0) && + ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { + reserve_bootmem(bus_to_phys(gp_resources[i].start), + size, 0); + total += gp_resources[i].end - + gp_resources[i].start + 1; + pr_info("reserve resource %s at %08x (%u bytes)\n", + gp_resources[i].name, gp_resources[i].start, + gp_resources[i].end - + gp_resources[i].start + 1); + } + } + + /* Loop through assigning addresses for those that are left */ + for (i = 0; gp_resources[i].flags != 0; i++) { + int size = gp_resources[i].end - gp_resources[i].start + 1; + if ((gp_resources[i].start == 0) && + ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { + void *mem = alloc_bootmem_pages(size); + + if (mem == NULL) + pr_err("Unable to allocate bootmem pages " + "for %s\n", gp_resources[i].name); + + else { + gp_resources[i].start = + phys_to_bus(virt_to_phys(mem)); + gp_resources[i].end = + gp_resources[i].start + size - 1; + total += size; + pr_info("allocate resource %s at %08x " + "(%u bytes)\n", + gp_resources[i].name, + gp_resources[i].start, size); + } + } + } + + pr_info("Total Platform driver memory allocation: 0x%08x\n", total); + + /* indicate resources that are platform I/O related */ + for (i = 0; gp_resources[i].flags != 0; i++) { + if ((gp_resources[i].start != 0) && + ((gp_resources[i].flags & IORESOURCE_IO) != 0)) { + pr_info("reserved platform resource %s at %08x\n", + gp_resources[i].name, gp_resources[i].start); + } + } +} + +/* + * + * PERSISTENT MEMORY (PMEM) CONFIGURATION + * + */ +static unsigned long pmemaddr __initdata; + +static int __init early_param_pmemaddr(char *p) +{ + pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0); + return 0; +} +early_param("pmemaddr", early_param_pmemaddr); + +static long pmemlen __initdata; + +static int __init early_param_pmemlen(char *p) +{ +/* TODO: we can use this code when and if the bootloader ever changes this */ +#if 0 + pmemlen = (unsigned long)simple_strtoul(p, NULL, 0); +#else + pmemlen = 0x20000; +#endif + return 0; +} +early_param("pmemlen", early_param_pmemlen); + +/* + * Set up persistent memory. If we were given values, we patch the array of + * resources. Otherwise, persistent memory may be allocated anywhere at all. + */ +static void __init pmem_setup_resource(void) +{ + struct resource *resource; + resource = asic_resource_get("DiagPersistentMemory"); + + if (resource && pmemaddr && pmemlen) { + /* The address provided by bootloader is in kseg0. Convert to + * a bus address. */ + resource->start = phys_to_bus(pmemaddr - 0x80000000); + resource->end = resource->start + pmemlen - 1; + + pr_info("persistent memory: start=0x%x end=0x%x\n", + resource->start, resource->end); + } +} + +/* + * + * RESOURCE ACCESS FUNCTIONS + * + */ + +/** + * asic_resource_get - retrieves parameters for a platform resource. + * @name: string to match resource + * + * Returns a pointer to a struct resource corresponding to the given name. + * + * CANNOT BE NAMED platform_resource_get, which would be the obvious choice, + * as this function name is already declared + */ +struct resource *asic_resource_get(const char *name) +{ + int i; + + for (i = 0; gp_resources[i].flags != 0; i++) { + if (strcmp(gp_resources[i].name, name) == 0) + return &gp_resources[i]; + } + + return NULL; +} +EXPORT_SYMBOL(asic_resource_get); + +/** + * platform_release_memory - release pre-allocated memory + * @ptr: pointer to memory to release + * @size: size of resource + * + * This must only be called for memory allocated or reserved via the boot + * memory allocator. + */ +void platform_release_memory(void *ptr, int size) +{ + unsigned long addr; + unsigned long end; + + addr = ((unsigned long)ptr + (PAGE_SIZE - 1)) & PAGE_MASK; + end = ((unsigned long)ptr + size) & PAGE_MASK; + + for (; addr < end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(__va(addr))); + init_page_count(virt_to_page(__va(addr))); + free_page((unsigned long)__va(addr)); + } +} +EXPORT_SYMBOL(platform_release_memory); + +/* + * + * FEATURE AVAILABILITY FUNCTIONS + * + */ +int platform_supports_dvr(void) +{ + return (platform_features & DVR_CAPABLE) != 0; +} + +int platform_supports_ffs(void) +{ + return (platform_features & FFS_CAPABLE) != 0; +} + +int platform_supports_pcie(void) +{ + return (platform_features & PCIE_CAPABLE) != 0; +} + +int platform_supports_display(void) +{ + return (platform_features & DISPLAY_CAPABLE) != 0; +} diff --git a/trunk/arch/mips/powertv/asic/asic_int.c b/trunk/arch/mips/powertv/asic/asic_int.c new file mode 100644 index 000000000000..80b2eed21ac3 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/asic_int.c @@ -0,0 +1,125 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Routines for generic manipulation of the interrupts found on the PowerTV + * platform. + * + * The interrupt controller is located in the South Bridge a PIIX4 device + * with two internal 82C95 interrupt controllers. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +static DEFINE_SPINLOCK(asic_irq_lock); + +static inline int get_int(void) +{ + unsigned long flags; + int irq; + + spin_lock_irqsave(&asic_irq_lock, flags); + + irq = (asic_read(int_int_scan) >> 4) - 1; + + if (irq == 0 || irq >= NR_IRQS) + irq = -1; + + spin_unlock_irqrestore(&asic_irq_lock, flags); + + return irq; +} + +static void asic_irqdispatch(void) +{ + int irq; + + irq = get_int(); + if (irq < 0) + return; /* interrupt has already been cleared */ + + do_IRQ(irq); +} + +static inline int clz(unsigned long x) +{ + __asm__( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ + return fls(pending) - 1 + CAUSEB_IP; +} + +/* + * TODO: check how it works under EIC mode. + */ +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == CAUSEF_IP3) + asic_irqdispatch(); + else if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + int i; + + asic_irq_init(); + + /* + * Initialize interrupt exception vectors. + */ + if (cpu_has_veic || cpu_has_vint) { + int nvec = cpu_has_veic ? 64 : 8; + for (i = 0; i < nvec; i++) + set_vi_handler(i, asic_irqdispatch); + } +} diff --git a/trunk/arch/mips/powertv/asic/irq_asic.c b/trunk/arch/mips/powertv/asic/irq_asic.c new file mode 100644 index 000000000000..b54d24499b06 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/irq_asic.c @@ -0,0 +1,116 @@ +/* + * Portions copyright (C) 2005-2009 Scientific Atlanta + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * Modified from arch/mips/kernel/irq-rm7000.c: + * Copyright (C) 2003 Ralf Baechle + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include + +#include +#include +#include + +#include + +static inline void unmask_asic_irq(unsigned int irq) +{ + unsigned long enable_bit; + + enable_bit = (1 << (irq & 0x1f)); + + switch (irq >> 5) { + case 0: + asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0); + break; + case 1: + asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1); + break; + case 2: + asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2); + break; + case 3: + asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3); + break; + default: + BUG(); + } +} + +static inline void mask_asic_irq(unsigned int irq) +{ + unsigned long disable_mask; + + disable_mask = ~(1 << (irq & 0x1f)); + + switch (irq >> 5) { + case 0: + asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0); + break; + case 1: + asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1); + break; + case 2: + asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2); + break; + case 3: + asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3); + break; + default: + BUG(); + } +} + +static struct irq_chip asic_irq_chip = { + .name = "ASIC Level", + .ack = mask_asic_irq, + .mask = mask_asic_irq, + .mask_ack = mask_asic_irq, + .unmask = unmask_asic_irq, + .eoi = unmask_asic_irq, +}; + +void __init asic_irq_init(void) +{ + int i; + + /* set priority to 0 */ + write_c0_status(read_c0_status() & ~(0x0000fc00)); + + asic_write(0, ien_int_0); + asic_write(0, ien_int_1); + asic_write(0, ien_int_2); + asic_write(0, ien_int_3); + + asic_write(0x0fffffff, int_level_3_3); + asic_write(0xffffffff, int_level_3_2); + asic_write(0xffffffff, int_level_3_1); + asic_write(0xffffffff, int_level_3_0); + asic_write(0xffffffff, int_level_2_3); + asic_write(0xffffffff, int_level_2_2); + asic_write(0xffffffff, int_level_2_1); + asic_write(0xffffffff, int_level_2_0); + asic_write(0xffffffff, int_level_1_3); + asic_write(0xffffffff, int_level_1_2); + asic_write(0xffffffff, int_level_1_1); + asic_write(0xffffffff, int_level_1_0); + asic_write(0xffffffff, int_level_0_3); + asic_write(0xffffffff, int_level_0_2); + asic_write(0xffffffff, int_level_0_1); + asic_write(0xffffffff, int_level_0_0); + + asic_write(0xf, int_int_scan); + + /* + * Initialize interrupt handlers. + */ + for (i = 0; i < NR_IRQS; i++) + set_irq_chip_and_handler(i, &asic_irq_chip, handle_level_irq); +} diff --git a/trunk/arch/mips/powertv/asic/prealloc-calliope.c b/trunk/arch/mips/powertv/asic/prealloc-calliope.c new file mode 100644 index 000000000000..cd5b76a1c951 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/prealloc-calliope.c @@ -0,0 +1,620 @@ +/* + * Memory pre-allocations for Calliope boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * NON_DVR_CAPABLE CALLIOPE RESOURCES + */ +struct resource non_dvr_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /*8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00600000 - 1, /* 6 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * DOCSIS Subsystem + */ + { + .name = "Docsis", + .start = 0x22000000, + .end = 0x22700000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x22700000, + .end = 0x23500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23700000, + .end = 0x23720000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer (don't need recording buffers) + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + * + */ + { }, +}; + +struct resource non_dvr_vz_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2 Meg */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8k block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x22202000, + .end = 0x22C20B85 - 1, /* 10.12 Meg */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x20300000, + .end = 0x20620000-1, /*3.125 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x20100000, + .end = 0x20300000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23900000, + .end = 0x23920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE+0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +struct resource non_dvr_vze_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x22000000, + .end = 0x22200000 - 1, /*2 Meg */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8k block ST231a monitor */ + .start = 0x22200000, + .end = 0x22202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x22202000, + .end = 0x22C20B85 - 1, /* 10.12 Meg */ + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x20396000, + .end = 0x206B6000 - 1, /* 3.125 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x20100000, + .end = 0x20396000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x206B6000, + .end = 0x206D6000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE+0x400 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +struct resource non_dvr_vzf_calliope_resources[] __initdata = +{ + /* + * VIDEO / LX1 + */ + { + .name = "ST231aImage", /*Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x24200000 - 1, /*2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /*8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24202000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + /* ~19.4 (21.5MiB - (2MiB + 8KiB)) */ + .end = 0x25580000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00480000 - 1, /* 4.5 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x22700000, + .end = 0x23500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x23700000, + .end = 0x23720000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer (don't need recording buffers) + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit1 + */ + { + .name = "DisplayBins1", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Synopsys GMAC Memory Region + */ + { + .name = "GMAC", + .start = 0x00000000, + .end = 0x00010000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/trunk/arch/mips/powertv/asic/prealloc-cronus.c b/trunk/arch/mips/powertv/asic/prealloc-cronus.c new file mode 100644 index 000000000000..45a5c3ea718c --- /dev/null +++ b/trunk/arch/mips/powertv/asic/prealloc-cronus.c @@ -0,0 +1,608 @@ +/* + * Memory pre-allocations for Cronus boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * DVR_CAPABLE CRONUS RESOURCES + */ +struct resource dvr_cronus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * ITFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "ITFS", + .start = 0x64180000, + /* 815,104 bytes each for 2 ITFS partitions. */ + .end = 0x6430DFFF, + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + /* (945K * 8) = (128K *3) 5 playbacks / 3 server */ + .end = 0x64AD0000 - 1, + .flags = IORESOURCE_IO, + }, + { + .name = "AvfsFileSys", + .start = 0x64AD0000, + .end = 0x64AD1000 - 1, /* 4K */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; + +/* + * NON_DVR_CAPABLE CRONUS RESOURCES + */ +struct resource non_dvr_cronus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + .end = 0x645D2C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + { }, +}; diff --git a/trunk/arch/mips/powertv/asic/prealloc-cronuslite.c b/trunk/arch/mips/powertv/asic/prealloc-cronuslite.c new file mode 100644 index 000000000000..23a905613c04 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/prealloc-cronuslite.c @@ -0,0 +1,290 @@ +/* + * Memory pre-allocations for Cronus Lite boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * NON_DVR_CAPABLE CRONUSLITE RESOURCES + */ +struct resource non_dvr_cronuslite_resources[] __initdata = +{ + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x63B80000 - 1, /* 6 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x63B83000, + .end = 0x63B84000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x63B84000, + .end = 0x63E48C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x63B80000, + .end = 0x63B82800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/trunk/arch/mips/powertv/asic/prealloc-zeus.c b/trunk/arch/mips/powertv/asic/prealloc-zeus.c new file mode 100644 index 000000000000..018d4514dbe3 --- /dev/null +++ b/trunk/arch/mips/powertv/asic/prealloc-zeus.c @@ -0,0 +1,459 @@ +/* + * Memory pre-allocations for Zeus boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Ken Eppinett + * David Schleef + */ + +#include +#include + +/* + * DVR_CAPABLE RESOURCES + */ +struct resource dvr_zeus_resources[] __initdata = +{ + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x20000000, + .end = 0x201FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x20200000, + .end = 0x20201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x20202000, + .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x30000000, + .end = 0x301FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x30200000, + .end = 0x30201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x30202000, + .end = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00c00000 - 1, /* 12 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x40100000, + .end = 0x407fffff, + .flags = IORESOURCE_MEM, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x46900000, + .end = 0x47700000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x47900000, + .end = 0x47920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * ITFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "ITFS", + .start = 0x00000000, + /* 815,104 bytes each for 2 ITFS partitions. */ + .end = 0x0018DFFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + /* (945K * 8) = (128K * 3) 5 playbacks / 3 server */ + .end = 0x007c2000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "AvfsFileSys", + .start = 0x00000000, + .end = 0x00001000 - 1, /* 4K */ + .flags = IORESOURCE_MEM, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Add other resources here + */ + { }, +}; + +/* + * NON_DVR_CAPABLE ZEUS RESOURCES + */ +struct resource non_dvr_zeus_resources[] __initdata = +{ + /* + * VIDEO1 / LX1 + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x20000000, + .end = 0x201FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x20200000, + .end = 0x20201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory1", + .start = 0x20202000, + .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * Sysaudio Driver + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * STAVEM driver/STAPI + */ + { + .name = "AVMEMPartition0", + .start = 0x00000000, + .end = 0x00600000 - 1, /* 6 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * DOCSIS Subsystem + */ + { + .name = "Docsis", + .start = 0x40100000, + .end = 0x407fffff, + .flags = IORESOURCE_MEM, + }, + /* + * GHW HAL Driver + */ + { + .name = "GraphicsHeap", + .start = 0x46900000, + .end = 0x47700000 - 1, /* 14 MB total */ + .flags = IORESOURCE_MEM, + }, + /* + * multi com buffer area + */ + { + .name = "MulticomSHM", + .start = 0x47900000, + .end = 0x47920000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * DMA Ring buffer + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Display bins buffer for unit0 + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x00000000, + .end = 0x002c4c00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_MEM, + }, + /* + * PMEM + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * Smartcard + */ + { + .name = "SmartCardInfo", + .start = 0x00000000, + .end = 0x2800 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * NAND Flash + */ + { + .name = "NandFlash", + .start = NAND_FLASH_BASE, + .end = NAND_FLASH_BASE + 0x400 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; diff --git a/trunk/arch/mips/powertv/cmdline.c b/trunk/arch/mips/powertv/cmdline.c new file mode 100644 index 000000000000..98d73cb0d452 --- /dev/null +++ b/trunk/arch/mips/powertv/cmdline.c @@ -0,0 +1,52 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Kernel command line creation using the prom monitor (YAMON) argc/argv. + */ +#include +#include + +#include + +#include "init.h" + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension. + */ +#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + int len; + + if (prom_argc != 1) + return; + + len = strlen(arcs_cmdline); + + arcs_cmdline[len] = ' '; + + strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv, + COMMAND_LINE_SIZE - len - 1); +} diff --git a/trunk/arch/mips/powertv/init.c b/trunk/arch/mips/powertv/init.c new file mode 100644 index 000000000000..5f4e4c304e48 --- /dev/null +++ b/trunk/arch/mips/powertv/init.c @@ -0,0 +1,128 @@ +/* + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * PROM library initialisation code. + */ +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "init.h" + +int prom_argc; +int *_prom_argv, *_prom_envp; +unsigned long _prom_memsize; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension, if running in 64-bit mode. + */ +#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) + +char *prom_getenv(char *envname) +{ + char *result = NULL; + + if (_prom_envp != NULL) { + /* + * Return a pointer to the given environment variable. + * In 64-bit mode: we're using 64-bit pointers, but all pointers + * in the PROM structures are only 32-bit, so we need some + * workarounds, if we are running in 64-bit mode. + */ + int i, index = 0; + + i = strlen(envname); + + while (prom_envp(index)) { + if (strncmp(envname, prom_envp(index), i) == 0) { + result = prom_envp(index + 1); + break; + } + index += 2; + } + } + + return result; +} + +/* TODO: Verify on linux-mips mailing list that the following two */ +/* functions are correct */ +/* TODO: Copy NMI and EJTAG exception vectors to memory from the */ +/* BootROM exception vectors. Flush their cache entries. test it. */ + +static void __init mips_nmi_setup(void) +{ + void *base; +#if defined(CONFIG_CPU_MIPS32_R1) + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa80) : + (void *)(CAC_BASE + 0x380); +#elif defined(CONFIG_CPU_MIPS32_R2) + base = (void *)0xbfc00000; +#else +#error NMI exception handler address not defined +#endif +} + +static void __init mips_ejtag_setup(void) +{ + void *base; + +#if defined(CONFIG_CPU_MIPS32_R1) + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa00) : + (void *)(CAC_BASE + 0x300); +#elif defined(CONFIG_CPU_MIPS32_R2) + base = (void *)0xbfc00480; +#else +#error EJTAG exception handler address not defined +#endif +} + +void __init prom_init(void) +{ + prom_argc = fw_arg0; + _prom_argv = (int *) fw_arg1; + _prom_envp = (int *) fw_arg2; + _prom_memsize = (unsigned long) fw_arg3; + + board_nmi_handler_setup = mips_nmi_setup; + board_ejtag_handler_setup = mips_ejtag_setup; + + pr_info("\nLINUX started...\n"); + prom_init_cmdline(); + configure_platform(); + prom_meminit(); + +#ifndef CONFIG_BOOTLOADER_DRIVER + pr_info("\nBootloader driver isn't loaded...\n"); +#endif +} diff --git a/trunk/arch/mips/powertv/init.h b/trunk/arch/mips/powertv/init.h new file mode 100644 index 000000000000..7af6bf25008c --- /dev/null +++ b/trunk/arch/mips/powertv/init.h @@ -0,0 +1,28 @@ +/* + * Definitions from powertv init.c file + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_INIT_H +#define _POWERTV_INIT_H +extern int prom_argc; +extern int *_prom_argv; +extern unsigned long _prom_memsize; +#endif diff --git a/trunk/arch/mips/powertv/memory.c b/trunk/arch/mips/powertv/memory.c new file mode 100644 index 000000000000..28d06605fff6 --- /dev/null +++ b/trunk/arch/mips/powertv/memory.c @@ -0,0 +1,186 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Apparently originally from arch/mips/malta-memory.c. Modified to work + * with the PowerTV bootloader. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "init.h" + +/* Memory constants */ +#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */ +#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */ +#define DEFAULT_MEMSIZE MEBIBYTE(256) /* If no memsize provided */ +#define LOW_MEM_MAX MEBIBYTE(252) /* Max usable low mem */ +#define RES_BOOTLDR_MEMSIZE MEBIBYTE(1) /* Memory reserved for bldr */ +#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */ +#define PHYS_MEM_START 0x10000000 /* Start of physical memory */ + +unsigned long ptv_memsize; + +char __initdata cmdline[COMMAND_LINE_SIZE]; + +void __init prom_meminit(void) +{ + char *memsize_str; + unsigned long memsize = 0; + unsigned int physend; + char *ptr; + int low_mem; + int high_mem; + + /* Check the command line first for a memsize directive */ + strcpy(cmdline, arcs_cmdline); + ptr = strstr(cmdline, "memsize="); + if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) + ptr = strstr(ptr, " memsize="); + + if (ptr) { + memsize = memparse(ptr + 8, &ptr); + } else { + /* otherwise look in the environment */ + memsize_str = prom_getenv("memsize"); + + if (memsize_str != NULL) { + pr_info("prom memsize = %s\n", memsize_str); + memsize = simple_strtol(memsize_str, NULL, 0); + } + + if (memsize == 0) { + if (_prom_memsize != 0) { + memsize = _prom_memsize; + pr_info("_prom_memsize = 0x%lx\n", memsize); + /* add in memory that the bootloader doesn't + * report */ + memsize += BOOT_MEM_SIZE; + } else { + memsize = DEFAULT_MEMSIZE; + pr_info("Memsize not passed by bootloader, " + "defaulting to 0x%lx\n", memsize); + } + } + } + + /* Store memsize for diagnostic purposes */ + ptv_memsize = memsize; + + physend = PFN_ALIGN(&_end) - 0x80000000; + if (memsize > LOW_MEM_MAX) { + low_mem = LOW_MEM_MAX; + high_mem = memsize - low_mem; + } else { + low_mem = memsize; + high_mem = 0; + } + +/* + * TODO: We will use the hard code for memory configuration until + * the bootloader releases their device tree to us. + */ + /* + * Add the memory reserved for use by the bootloader to the + * memory map. + */ + add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE, + BOOT_MEM_RESERVED); +#ifdef CONFIG_HIGHMEM_256_128 + /* + * Add memory in low for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved for reset vector. + */ + add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); + /* + * Add the memory reserved. + */ + add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED); + /* + * Add memory in high for general use by the kernel and its friends + * (like drivers, applications, etc). + * + * 75MB is reserved for devices which are using the memory in high. + */ + add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), + BOOT_MEM_RAM); +#elif defined CONFIG_HIGHMEM_128_128 + /* + * Add memory in low for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved. + */ + add_memory_region(PHYS_MEM_START + MEBIBYTE(128), + MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED); + /* + * Add memory in high for general use by the kernel and its friends + * (like drivers, applications, etc). + * + * 75MB is reserved for devices which are using the memory in high. + */ + add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), + BOOT_MEM_RAM); +#else + /* Add low memory regions for either: + * - no-highmemory configuration case -OR- + * - highmemory "HIGHMEM_LOWBANK_ONLY" case + */ + /* + * Add memory for general use by the kernel and its friends + * (like drivers, applications, etc). + */ + add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, + low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + /* + * Add the memory reserved for reset vector. + */ + add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); +#endif +} + +void __init prom_free_prom_memory(void) +{ + unsigned long addr; + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) + continue; + + addr = boot_mem_map.map[i].addr; + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); + } +} diff --git a/trunk/arch/mips/powertv/pci/Makefile b/trunk/arch/mips/powertv/pci/Makefile new file mode 100644 index 000000000000..f5c62462fc9d --- /dev/null +++ b/trunk/arch/mips/powertv/pci/Makefile @@ -0,0 +1,21 @@ +# +# Copyright (C) 2009 Scientific-Atlanta, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +obj-$(CONFIG_PCI) += fixup-powertv.o + +EXTRA_CFLAGS += -Wall -Werror diff --git a/trunk/arch/mips/powertv/pci/fixup-powertv.c b/trunk/arch/mips/powertv/pci/fixup-powertv.c new file mode 100644 index 000000000000..726bc2e824b3 --- /dev/null +++ b/trunk/arch/mips/powertv/pci/fixup-powertv.c @@ -0,0 +1,36 @@ +#include +#include +#include +#include "powertv-pci.h" + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return asic_pcie_map_irq(dev, slot, pin); +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* + * asic_pcie_map_irq + * + * Parameters: + * *dev - pointer to a pci_dev structure (not used) + * slot - slot number (not used) + * pin - pin number (not used) + * + * Return Value: + * Returns: IRQ number (always the PCI Express IRQ number) + * + * Description: + * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt. + * + */ +int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return irq_pciexp; +} +EXPORT_SYMBOL(asic_pcie_map_irq); diff --git a/trunk/arch/mips/powertv/pci/powertv-pci.h b/trunk/arch/mips/powertv/pci/powertv-pci.h new file mode 100644 index 000000000000..1b5886bbd759 --- /dev/null +++ b/trunk/arch/mips/powertv/pci/powertv-pci.h @@ -0,0 +1,31 @@ +/* + * powertv-pci.c + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/* + * Local definitions for the powertv PCI code + */ + +#ifndef _POWERTV_PCI_POWERTV_PCI_H_ +#define _POWERTV_PCI_POWERTV_PCI_H_ +extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +extern int asic_pcie_init(void); +extern int asic_pcie_init(void); + +extern int log_level; +#endif diff --git a/trunk/arch/mips/powertv/powertv-clock.h b/trunk/arch/mips/powertv/powertv-clock.h new file mode 100644 index 000000000000..d94c54311485 --- /dev/null +++ b/trunk/arch/mips/powertv/powertv-clock.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_POWERTV_CLOCK_H +#define _POWERTV_POWERTV_CLOCK_H +extern int powertv_clockevent_init(void); +extern void powertv_clocksource_init(void); +extern unsigned int mips_get_pll_freq(void); +#endif diff --git a/trunk/arch/mips/powertv/powertv_setup.c b/trunk/arch/mips/powertv/powertv_setup.c new file mode 100644 index 000000000000..bd8ebf128f29 --- /dev/null +++ b/trunk/arch/mips/powertv/powertv_setup.c @@ -0,0 +1,351 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "reset.h" + +#define VAL(n) STR(n) + +/* + * Macros for loading addresses and storing registers: + * PTR_LA Load the address into a register + * LONG_S Store the full width of the given register. + * LONG_L Load the full width of the given register + * PTR_ADDIU Add a constant value to a register used as a pointer + * REG_SIZE Number of 8-bit bytes in a full width register + */ +#ifdef CONFIG_64BIT +#warning TODO: 64-bit code needs to be verified +#define PTR_LA "dla " +#define LONG_S "sd " +#define LONG_L "ld " +#define PTR_ADDIU "daddiu " +#define REG_SIZE "8" /* In bytes */ +#endif + +#ifdef CONFIG_32BIT +#define PTR_LA "la " +#define LONG_S "sw " +#define LONG_L "lw " +#define PTR_ADDIU "addiu " +#define REG_SIZE "4" /* In bytes */ +#endif + +static struct pt_regs die_regs; +static bool have_die_regs; + +static void register_panic_notifier(void); +static int panic_handler(struct notifier_block *notifier_block, + unsigned long event, void *cause_string); + +const char *get_system_type(void) +{ + return "PowerTV"; +} + +void __init plat_mem_setup(void) +{ + panic_on_oops = 1; + register_panic_notifier(); + +#if 0 + mips_pcibios_init(); +#endif + mips_reboot_setup(); +} + +/* + * Install a panic notifier for platform-specific diagnostics + */ +static void register_panic_notifier() +{ + static struct notifier_block panic_notifier = { + .notifier_call = panic_handler, + .next = NULL, + .priority = INT_MAX + }; + atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier); +} + +static int panic_handler(struct notifier_block *notifier_block, + unsigned long event, void *cause_string) +{ + struct pt_regs my_regs; + + /* Save all of the registers */ + { + unsigned long at, v0, v1; /* Must be on the stack */ + + /* Start by saving $at and v0 on the stack. We use $at + * ourselves, but it looks like the compiler may use v0 or v1 + * to load the address of the pt_regs structure. We'll come + * back later to store the registers in the pt_regs + * structure. */ + __asm__ __volatile__ ( + ".set noat\n" + LONG_S "$at, %[at]\n" + LONG_S "$2, %[v0]\n" + LONG_S "$3, %[v1]\n" + : + [at] "=m" (at), + [v0] "=m" (v0), + [v1] "=m" (v1) + : + : "at" + ); + + __asm__ __volatile__ ( + ".set noat\n" + "move $at, %[pt_regs]\n" + + /* Argument registers */ + LONG_S "$4, " VAL(PT_R4) "($at)\n" + LONG_S "$5, " VAL(PT_R5) "($at)\n" + LONG_S "$6, " VAL(PT_R6) "($at)\n" + LONG_S "$7, " VAL(PT_R7) "($at)\n" + + /* Temporary regs */ + LONG_S "$8, " VAL(PT_R8) "($at)\n" + LONG_S "$9, " VAL(PT_R9) "($at)\n" + LONG_S "$10, " VAL(PT_R10) "($at)\n" + LONG_S "$11, " VAL(PT_R11) "($at)\n" + LONG_S "$12, " VAL(PT_R12) "($at)\n" + LONG_S "$13, " VAL(PT_R13) "($at)\n" + LONG_S "$14, " VAL(PT_R14) "($at)\n" + LONG_S "$15, " VAL(PT_R15) "($at)\n" + + /* "Saved" registers */ + LONG_S "$16, " VAL(PT_R16) "($at)\n" + LONG_S "$17, " VAL(PT_R17) "($at)\n" + LONG_S "$18, " VAL(PT_R18) "($at)\n" + LONG_S "$19, " VAL(PT_R19) "($at)\n" + LONG_S "$20, " VAL(PT_R20) "($at)\n" + LONG_S "$21, " VAL(PT_R21) "($at)\n" + LONG_S "$22, " VAL(PT_R22) "($at)\n" + LONG_S "$23, " VAL(PT_R23) "($at)\n" + + /* Add'l temp regs */ + LONG_S "$24, " VAL(PT_R24) "($at)\n" + LONG_S "$25, " VAL(PT_R25) "($at)\n" + + /* Kernel temp regs */ + LONG_S "$26, " VAL(PT_R26) "($at)\n" + LONG_S "$27, " VAL(PT_R27) "($at)\n" + + /* Global pointer, stack pointer, frame pointer and + * return address */ + LONG_S "$gp, " VAL(PT_R28) "($at)\n" + LONG_S "$sp, " VAL(PT_R29) "($at)\n" + LONG_S "$fp, " VAL(PT_R30) "($at)\n" + LONG_S "$ra, " VAL(PT_R31) "($at)\n" + + /* Now we can get the $at and v0 registers back and + * store them */ + LONG_L "$8, %[at]\n" + LONG_S "$8, " VAL(PT_R1) "($at)\n" + LONG_L "$8, %[v0]\n" + LONG_S "$8, " VAL(PT_R2) "($at)\n" + LONG_L "$8, %[v1]\n" + LONG_S "$8, " VAL(PT_R3) "($at)\n" + : + : + [at] "m" (at), + [v0] "m" (v0), + [v1] "m" (v1), + [pt_regs] "r" (&my_regs) + : "at", "t0" + ); + + /* Set the current EPC value to be the current location in this + * function */ + __asm__ __volatile__ ( + ".set noat\n" + "1:\n" + PTR_LA "$at, 1b\n" + LONG_S "$at, %[cp0_epc]\n" + : + [cp0_epc] "=m" (my_regs.cp0_epc) + : + : "at" + ); + + my_regs.cp0_cause = read_c0_cause(); + my_regs.cp0_status = read_c0_status(); + } + +#ifdef CONFIG_DIAGNOSTICS + failure_report((char *) cause_string, + have_die_regs ? &die_regs : &my_regs); + have_die_regs = false; +#else + pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... " + "zzzz... \n"); +#endif + + return NOTIFY_DONE; +} + +/** + * Platform-specific handling of oops + * @str: Pointer to the oops string + * @regs: Pointer to the oops registers + * All we do here is to save the registers for subsequent printing through + * the panic notifier. + */ +void platform_die(const char *str, const struct pt_regs *regs) +{ + /* If we already have saved registers, don't overwrite them as they + * they apply to the initial fault */ + + if (!have_die_regs) { + have_die_regs = true; + die_regs = *regs; + } +} + +/* Information about the RF MAC address, if one was supplied on the + * command line. */ +static bool have_rfmac; +static u8 rfmac[ETH_ALEN]; + +static int rfmac_param(char *p) +{ + u8 *q; + bool is_high_nibble; + int c; + + /* Skip a leading "0x", if present */ + if (*p == '0' && *(p+1) == 'x') + p += 2; + + q = rfmac; + is_high_nibble = true; + + for (c = (unsigned char) *p++; + isxdigit(c) && q - rfmac < ETH_ALEN; + c = (unsigned char) *p++) { + int nibble; + + nibble = (isdigit(c) ? (c - '0') : + (isupper(c) ? c - 'A' + 10 : c - 'a' + 10)); + + if (is_high_nibble) + *q = nibble << 4; + else + *q++ |= nibble; + + is_high_nibble = !is_high_nibble; + } + + /* If we parsed all the way to the end of the parameter value and + * parsed all ETH_ALEN bytes, we have a usable RF MAC address */ + have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN); + + return 0; +} + +early_param("rfmac", rfmac_param); + +/* + * Generate an Ethernet MAC address that has a good chance of being unique. + * @addr: Pointer to six-byte array containing the Ethernet address + * Generates an Ethernet MAC address that is highly likely to be unique for + * this particular system on a network with other systems of the same type. + * + * The problem we are solving is that, when random_ether_addr() is used to + * generate MAC addresses at startup, there isn't much entropy for the random + * number generator to use and the addresses it produces are fairly likely to + * be the same as those of other identical systems on the same local network. + * This is true even for relatively small numbers of systems (for the reason + * why, see the Wikipedia entry for "Birthday problem" at: + * http://en.wikipedia.org/wiki/Birthday_problem + * + * The good news is that we already have a MAC address known to be unique, the + * RF MAC address. The bad news is that this address is already in use on the + * RF interface. Worse, the obvious trick, taking the RF MAC address and + * turning on the locally managed bit, has already been used for other devices. + * Still, this does give us something to work with. + * + * The approach we take is: + * 1. If we can't get the RF MAC Address, just call random_ether_addr. + * 2. Use the 24-bit NIC-specific bits of the RF MAC address as the last 24 + * bits of the new address. This is very likely to be unique, except for + * the current box. + * 3. To avoid using addresses already on the current box, we set the top + * six bits of the address with a value different from any currently + * registered Scientific Atlanta organizationally unique identifyer + * (OUI). This avoids duplication with any addresses on the system that + * were generated from valid Scientific Atlanta-registered address by + * simply flipping the locally managed bit. + * 4. We aren't generating a multicast address, so we leave the multicast + * bit off. Since we aren't using a registered address, we have to set + * the locally managed bit. + * 5. We then randomly generate the remaining 16-bits. This does two + * things: + * a. It allows us to call this function for more than one device + * in this system + * b. It ensures that things will probably still work even if + * some device on the device network has a locally managed + * address that matches the top six bits from step 2. + */ +void platform_random_ether_addr(u8 addr[ETH_ALEN]) +{ + const int num_random_bytes = 2; + const unsigned char non_sciatl_oui_bits = 0xc0u; + const unsigned char mac_addr_locally_managed = (1 << 1); + + if (!have_rfmac) { + pr_warning("rfmac not available on command line; " + "generating random MAC address\n"); + random_ether_addr(addr); + } + + else { + int i; + + /* Set the first byte to something that won't match a Scientific + * Atlanta OUI, is locally managed, and isn't a multicast + * address */ + addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed; + + /* Get some bytes of random address information */ + get_random_bytes(&addr[1], num_random_bytes); + + /* Copy over the NIC-specific bits of the RF MAC address */ + for (i = 1 + num_random_bytes; i < ETH_ALEN; i++) + addr[i] = rfmac[i]; + } +} diff --git a/trunk/arch/mips/powertv/reset.c b/trunk/arch/mips/powertv/reset.c new file mode 100644 index 000000000000..494c652c984b --- /dev/null +++ b/trunk/arch/mips/powertv/reset.c @@ -0,0 +1,65 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include + +#include +#include /* Not included by linux/reboot.h */ + +#ifdef CONFIG_BOOTLOADER_DRIVER +#include +#endif + +#include +#include "reset.h" + +static void mips_machine_restart(char *command); +static void mips_machine_halt(void); + +static void mips_machine_restart(char *command) +{ +#ifdef CONFIG_BOOTLOADER_DRIVER + /* + * Call the bootloader's reset function to ensure + * that persistent data is flushed before hard reset + */ + kbldr_SetCauseAndReset(); +#else + writel(0x1, asic_reg_addr(watchdog)); +#endif +} + +static void mips_machine_halt(void) +{ +#ifdef CONFIG_BOOTLOADER_DRIVER + /* + * Call the bootloader's reset function to ensure + * that persistent data is flushed before hard reset + */ + kbldr_SetCauseAndReset(); +#else + writel(0x1, asic_reg_addr(watchdog)); +#endif +} + +void mips_reboot_setup(void) +{ + _machine_restart = mips_machine_restart; + _machine_halt = mips_machine_halt; + pm_power_off = mips_machine_halt; +} diff --git a/trunk/arch/mips/powertv/reset.h b/trunk/arch/mips/powertv/reset.h new file mode 100644 index 000000000000..888fd09e2620 --- /dev/null +++ b/trunk/arch/mips/powertv/reset.h @@ -0,0 +1,26 @@ +/* + * Definitions from powertv reset.c file + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#ifndef _POWERTV_POWERTV_RESET_H +#define _POWERTV_POWERTV_RESET_H +extern void mips_reboot_setup(void); +#endif diff --git a/trunk/arch/mips/mipssim/sim_cmdline.c b/trunk/arch/mips/powertv/time.c similarity index 60% rename from trunk/arch/mips/mipssim/sim_cmdline.c rename to trunk/arch/mips/powertv/time.c index 74240e1ce5a5..1e0a5ef4c8c7 100644 --- a/trunk/arch/mips/mipssim/sim_cmdline.c +++ b/trunk/arch/mips/powertv/time.c @@ -1,5 +1,7 @@ /* - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Portions copyright (C) 2009 Cisco Systems, Inc. * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -14,19 +16,22 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * + * Setting up the clock on the MIPS boards. */ + #include -#include -#include +#include +#include -extern char arcs_cmdline[]; +#include "powertv-clock.h" -char * __init prom_getcmdline(void) +unsigned int __cpuinit get_c0_compare_int(void) { - return arcs_cmdline; + return irq_mips_timer; } -void __init prom_init_cmdline(void) +void __init plat_time_init(void) { - /* XXX: Get boot line from environment? */ + powertv_clocksource_init(); + r4k_clockevent_init(); } diff --git a/trunk/arch/mips/rb532/prom.c b/trunk/arch/mips/rb532/prom.c index ad5bd1097974..d7c26d00cfef 100644 --- a/trunk/arch/mips/rb532/prom.c +++ b/trunk/arch/mips/rb532/prom.c @@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag) void __init prom_setup_cmdline(void) { - static char cmd_line[CL_SIZE] __initdata; + static char cmd_line[COMMAND_LINE_SIZE] __initdata; char *cp, *board; int prom_argc; char **prom_argv, **prom_envp; @@ -115,7 +115,7 @@ void __init prom_setup_cmdline(void) strcpy(cp, arcs_cmdline); cp += strlen(arcs_cmdline); } - cmd_line[CL_SIZE-1] = '\0'; + cmd_line[COMMAND_LINE_SIZE - 1] = '\0'; strcpy(arcs_cmdline, cmd_line); } diff --git a/trunk/arch/mips/sgi-ip22/ip22-eisa.c b/trunk/arch/mips/sgi-ip22/ip22-eisa.c index 1617241d2737..da44ccb20829 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-eisa.c +++ b/trunk/arch/mips/sgi-ip22/ip22-eisa.c @@ -50,9 +50,9 @@ static char __init *decode_eisa_sig(unsigned long addr) { - static char sig_str[EISA_SIG_LEN]; + static char sig_str[EISA_SIG_LEN] __initdata; u8 sig[4]; - u16 rev; + u16 rev; int i; for (i = 0; i < 4; i++) { diff --git a/trunk/arch/mips/sgi-ip22/ip22-int.c b/trunk/arch/mips/sgi-ip22/ip22-int.c index 0ecd5fe9486e..383f11d7f442 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-int.c +++ b/trunk/arch/mips/sgi-ip22/ip22-int.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -150,7 +151,7 @@ static void indy_local1_irqdispatch(void) extern void ip22_be_interrupt(int irq); -static void indy_buserror_irq(void) +static void __irq_entry indy_buserror_irq(void) { int irq = SGI_BUSERR_IRQ; diff --git a/trunk/arch/mips/sgi-ip22/ip22-setup.c b/trunk/arch/mips/sgi-ip22/ip22-setup.c index b9a931358e23..5deeb68b6c9c 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-setup.c +++ b/trunk/arch/mips/sgi-ip22/ip22-setup.c @@ -67,7 +67,7 @@ void __init plat_mem_setup(void) cserial = ArcGetEnvironmentVariable("ConsoleOut"); if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) { - static char options[8]; + static char options[8] __initdata; char *baud = ArcGetEnvironmentVariable("dbaud"); if (baud) strcpy(options, baud); diff --git a/trunk/arch/mips/sgi-ip22/ip22-time.c b/trunk/arch/mips/sgi-ip22/ip22-time.c index c8f7d2328b24..603fc91c1030 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-time.c +++ b/trunk/arch/mips/sgi-ip22/ip22-time.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -115,7 +116,7 @@ __init void plat_time_init(void) } /* Generic SGI handler for (spurious) 8254 interrupts */ -void indy_8254timer_irq(void) +void __irq_entry indy_8254timer_irq(void) { int irq = SGI_8254_0_IRQ; ULONG cnt; diff --git a/trunk/arch/mips/sgi-ip32/ip32-setup.c b/trunk/arch/mips/sgi-ip32/ip32-setup.c index c5a5d4a31b4b..3abd1465ec02 100644 --- a/trunk/arch/mips/sgi-ip32/ip32-setup.c +++ b/trunk/arch/mips/sgi-ip32/ip32-setup.c @@ -90,7 +90,7 @@ void __init plat_mem_setup(void) { char* con = ArcGetEnvironmentVariable("console"); if (con && *con == 'd') { - static char options[8]; + static char options[8] __initdata; char *baud = ArcGetEnvironmentVariable("dbaud"); if (baud) strcpy(options, baud); diff --git a/trunk/arch/mips/sibyte/common/cfe.c b/trunk/arch/mips/sibyte/common/cfe.c index eb5396cf81bb..6343011e9902 100644 --- a/trunk/arch/mips/sibyte/common/cfe.c +++ b/trunk/arch/mips/sibyte/common/cfe.c @@ -287,7 +287,7 @@ void __init prom_init(void) * boot console */ cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); - if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { + if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) { if (argc >= 0) { /* The loader should have set the command line */ /* too early for panic to do any good */ @@ -318,7 +318,7 @@ void __init prom_init(void) #endif /* CONFIG_BLK_DEV_INITRD */ /* Not sure this is needed, but it's the safe way. */ - arcs_cmdline[CL_SIZE-1] = 0; + arcs_cmdline[COMMAND_LINE_SIZE-1] = 0; prom_meminit(); diff --git a/trunk/arch/mips/sni/a20r.c b/trunk/arch/mips/sni/a20r.c index 7dd76fb3b645..e6980892834a 100644 --- a/trunk/arch/mips/sni/a20r.c +++ b/trunk/arch/mips/sni/a20r.c @@ -188,7 +188,7 @@ static void end_a20r_irq(unsigned int irq) } static struct irq_chip a20r_irq_type = { - .typename = "A20R", + .name = "A20R", .ack = mask_a20r_irq, .mask = mask_a20r_irq, .mask_ack = mask_a20r_irq, diff --git a/trunk/arch/mips/sni/pcimt.c b/trunk/arch/mips/sni/pcimt.c index 74e6c67982fb..51e62bbaa23b 100644 --- a/trunk/arch/mips/sni/pcimt.c +++ b/trunk/arch/mips/sni/pcimt.c @@ -214,7 +214,7 @@ static void end_pcimt_irq(unsigned int irq) } static struct irq_chip pcimt_irq_type = { - .typename = "PCIMT", + .name = "PCIMT", .ack = disable_pcimt_irq, .mask = disable_pcimt_irq, .mask_ack = disable_pcimt_irq, diff --git a/trunk/arch/mips/sni/pcit.c b/trunk/arch/mips/sni/pcit.c index 071a9573ac7f..f4699d35858b 100644 --- a/trunk/arch/mips/sni/pcit.c +++ b/trunk/arch/mips/sni/pcit.c @@ -176,7 +176,7 @@ void end_pcit_irq(unsigned int irq) } static struct irq_chip pcit_irq_type = { - .typename = "PCIT", + .name = "PCIT", .ack = disable_pcit_irq, .mask = disable_pcit_irq, .mask_ack = disable_pcit_irq, diff --git a/trunk/arch/mips/sni/rm200.c b/trunk/arch/mips/sni/rm200.c index 5e687819cbc2..46f00691f448 100644 --- a/trunk/arch/mips/sni/rm200.c +++ b/trunk/arch/mips/sni/rm200.c @@ -449,7 +449,7 @@ void end_rm200_irq(unsigned int irq) } static struct irq_chip rm200_irq_type = { - .typename = "RM200", + .name = "RM200", .ack = disable_rm200_irq, .mask = disable_rm200_irq, .mask_ack = disable_rm200_irq, diff --git a/trunk/arch/mips/sni/setup.c b/trunk/arch/mips/sni/setup.c index a49272ce7ef5..d16b462154c3 100644 --- a/trunk/arch/mips/sni/setup.c +++ b/trunk/arch/mips/sni/setup.c @@ -60,7 +60,7 @@ static void __init sni_console_setup(void) char *cdev; char *baud; int port; - static char options[8]; + static char options[8] __initdata; cdev = prom_getenv("console_dev"); if (strncmp(cdev, "tty", 3) == 0) { diff --git a/trunk/arch/mips/txx9/generic/setup.c b/trunk/arch/mips/txx9/generic/setup.c index d66802edebb2..06e801c7e258 100644 --- a/trunk/arch/mips/txx9/generic/setup.c +++ b/trunk/arch/mips/txx9/generic/setup.c @@ -160,7 +160,7 @@ static void __init prom_init_cmdline(void) int argc; int *argv32; int i; /* Always ignore the "-c" at argv[0] */ - static char builtin[CL_SIZE] __initdata; + static char builtin[COMMAND_LINE_SIZE] __initdata; if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { /* @@ -315,7 +315,7 @@ static inline void txx9_cache_fixup(void) static void __init preprocess_cmdline(void) { - static char cmdline[CL_SIZE] __initdata; + static char cmdline[COMMAND_LINE_SIZE] __initdata; char *s; strcpy(cmdline, arcs_cmdline); diff --git a/trunk/arch/mn10300/include/asm/asm-offsets.h b/trunk/arch/mn10300/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/mn10300/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/mn10300/include/asm/elf.h b/trunk/arch/mn10300/include/asm/elf.h index 75a70aa9fd6f..e5fa97cd9a14 100644 --- a/trunk/arch/mn10300/include/asm/elf.h +++ b/trunk/arch/mn10300/include/asm/elf.h @@ -77,7 +77,6 @@ do { \ _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \ } while (0) -#define USE_ELF_CORE_DUMP #define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE 4096 diff --git a/trunk/arch/parisc/hpux/sys_hpux.c b/trunk/arch/parisc/hpux/sys_hpux.c index 18072e03a019..92343bd35fa3 100644 --- a/trunk/arch/parisc/hpux/sys_hpux.c +++ b/trunk/arch/parisc/hpux/sys_hpux.c @@ -445,12 +445,7 @@ int hpux_getdomainname(char __user *name, int len) int hpux_pipe(int *kstack_fildes) { - int error; - - lock_kernel(); - error = do_pipe_flags(kstack_fildes, 0); - unlock_kernel(); - return error; + return do_pipe_flags(kstack_fildes, 0); } /* lies - says it works, but it really didn't lock anything */ diff --git a/trunk/arch/parisc/include/asm/asm-offsets.h b/trunk/arch/parisc/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/parisc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/parisc/include/asm/bug.h b/trunk/arch/parisc/include/asm/bug.h index 8cfc553fc837..75e46c557a16 100644 --- a/trunk/arch/parisc/include/asm/bug.h +++ b/trunk/arch/parisc/include/asm/bug.h @@ -32,14 +32,14 @@ "\t.popsection" \ : : "i" (__FILE__), "i" (__LINE__), \ "i" (0), "i" (sizeof(struct bug_entry)) ); \ - for(;;) ; \ + unreachable(); \ } while(0) #else #define BUG() \ do { \ asm volatile(PARISC_BUG_BREAK_ASM : : ); \ - for(;;) ; \ + unreachable(); \ } while(0) #endif diff --git a/trunk/arch/parisc/include/asm/elf.h b/trunk/arch/parisc/include/asm/elf.h index 9c802eb4be84..19f6cb1a4a1c 100644 --- a/trunk/arch/parisc/include/asm/elf.h +++ b/trunk/arch/parisc/include/asm/elf.h @@ -328,7 +328,6 @@ struct pt_regs; /* forward declaration... */ such function. */ #define ELF_PLAT_INIT(_r, load_addr) _r->gr[23] = 0 -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/trunk/arch/parisc/include/asm/ftrace.h b/trunk/arch/parisc/include/asm/ftrace.h index 2fa05dd6aeee..72c0fafaa039 100644 --- a/trunk/arch/parisc/include/asm/ftrace.h +++ b/trunk/arch/parisc/include/asm/ftrace.h @@ -20,6 +20,20 @@ struct ftrace_ret_stack { * Defined in entry.S */ extern void return_to_handler(void); + + +extern unsigned long return_address(unsigned int); + +#define HAVE_ARCH_CALLER_ADDR + +#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +#define CALLER_ADDR1 return_address(1) +#define CALLER_ADDR2 return_address(2) +#define CALLER_ADDR3 return_address(3) +#define CALLER_ADDR4 return_address(4) +#define CALLER_ADDR5 return_address(5) +#define CALLER_ADDR6 return_address(6) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_PARISC_FTRACE_H */ diff --git a/trunk/arch/parisc/kernel/asm-offsets.c b/trunk/arch/parisc/kernel/asm-offsets.c index fcd3c707bf12..ec787b411e9a 100644 --- a/trunk/arch/parisc/kernel/asm-offsets.c +++ b/trunk/arch/parisc/kernel/asm-offsets.c @@ -244,9 +244,6 @@ int main(void) DEFINE(THREAD_SZ, sizeof(struct thread_info)); DEFINE(THREAD_SZ_ALGN, align(sizeof(struct thread_info), 64)); BLANK(); - DEFINE(IRQSTAT_SIRQ_PEND, offsetof(irq_cpustat_t, __softirq_pending)); - DEFINE(IRQSTAT_SZ, sizeof(irq_cpustat_t)); - BLANK(); DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base)); DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride)); DEFINE(ICACHE_COUNT, offsetof(struct pdc_cache_info, ic_count)); diff --git a/trunk/arch/parisc/kernel/irq.c b/trunk/arch/parisc/kernel/irq.c index f47465e8d040..efbcee5d2220 100644 --- a/trunk/arch/parisc/kernel/irq.c +++ b/trunk/arch/parisc/kernel/irq.c @@ -145,7 +145,7 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) #endif static struct irq_chip cpu_interrupt_type = { - .typename = "CPU", + .name = "CPU", .startup = cpu_startup_irq, .shutdown = cpu_disable_irq, .enable = cpu_enable_irq, @@ -192,7 +192,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_irqs(i)); #endif - seq_printf(p, " %14s", irq_desc[i].chip->typename); + seq_printf(p, " %14s", irq_desc[i].chip->name); #ifndef PARISC_IRQ_CR16_COUNTS seq_printf(p, " %s", action->name); diff --git a/trunk/arch/parisc/kernel/signal.c b/trunk/arch/parisc/kernel/signal.c index e8467e4aa8d1..fb37ac52e46c 100644 --- a/trunk/arch/parisc/kernel/signal.c +++ b/trunk/arch/parisc/kernel/signal.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/trunk/arch/parisc/kernel/smp.c b/trunk/arch/parisc/kernel/smp.c index 1fd0f0cec037..3f2fce8ce6b6 100644 --- a/trunk/arch/parisc/kernel/smp.c +++ b/trunk/arch/parisc/kernel/smp.c @@ -60,8 +60,6 @@ static int smp_debug_lvl = 0; #define smp_debug(lvl, ...) do { } while(0) #endif /* DEBUG_SMP */ -DEFINE_SPINLOCK(smp_lock); - volatile struct task_struct *smp_init_current_idle_task; /* track which CPU is booting */ @@ -69,7 +67,7 @@ static volatile int cpu_now_booting __cpuinitdata; static int parisc_max_cpus __cpuinitdata = 1; -DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED; +static DEFINE_PER_CPU(spinlock_t, ipi_lock); enum ipi_message_type { IPI_NOP=0, @@ -438,6 +436,11 @@ void __init smp_prepare_boot_cpu(void) */ void __init smp_prepare_cpus(unsigned int max_cpus) { + int cpu; + + for_each_possible_cpu(cpu) + spin_lock_init(&per_cpu(ipi_lock, cpu)); + init_cpu_present(cpumask_of(0)); parisc_max_cpus = max_cpus; diff --git a/trunk/arch/parisc/kernel/sys_parisc32.c b/trunk/arch/parisc/kernel/sys_parisc32.c index 76d23ec8dfaa..9779ece2b070 100644 --- a/trunk/arch/parisc/kernel/sys_parisc32.c +++ b/trunk/arch/parisc/kernel/sys_parisc32.c @@ -26,13 +26,7 @@ #include #include #include -#include #include -#include -#include -#include -#include -#include #include #include #include diff --git a/trunk/arch/parisc/kernel/unwind.c b/trunk/arch/parisc/kernel/unwind.c index a36799e85693..d58eac1a8288 100644 --- a/trunk/arch/parisc/kernel/unwind.c +++ b/trunk/arch/parisc/kernel/unwind.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -115,24 +116,18 @@ unwind_table_init(struct unwind_table *table, const char *name, } } +static int cmp_unwind_table_entry(const void *a, const void *b) +{ + return ((const struct unwind_table_entry *)a)->region_start + - ((const struct unwind_table_entry *)b)->region_start; +} + static void unwind_table_sort(struct unwind_table_entry *start, struct unwind_table_entry *finish) { - struct unwind_table_entry el, *p, *q; - - for (p = start + 1; p < finish; ++p) { - if (p[0].region_start < p[-1].region_start) { - el = *p; - q = p; - do { - q[0] = q[-1]; - --q; - } while (q > start && - el.region_start < q[-1].region_start); - *q = el; - } - } + sort(start, finish - start, sizeof(struct unwind_table_entry), + cmp_unwind_table_entry, NULL); } struct unwind_table * @@ -417,3 +412,30 @@ int unwind_to_user(struct unwind_frame_info *info) return ret; } + +unsigned long return_address(unsigned int level) +{ + struct unwind_frame_info info; + struct pt_regs r; + unsigned long sp; + + /* initialize unwind info */ + asm volatile ("copy %%r30, %0" : "=r"(sp)); + memset(&r, 0, sizeof(struct pt_regs)); + r.iaoq[0] = (unsigned long) current_text_addr(); + r.gr[2] = (unsigned long) __builtin_return_address(0); + r.gr[30] = sp; + unwind_frame_init(&info, current, &r); + + /* unwind stack */ + ++level; + do { + if (unwind_once(&info) < 0 || info.ip == 0) + return 0; + if (!__kernel_text_address(info.ip)) { + return 0; + } + } while (info.ip && level--); + + return info.ip; +} diff --git a/trunk/arch/powerpc/Kconfig b/trunk/arch/powerpc/Kconfig index 0df57466e783..ba3948c70072 100644 --- a/trunk/arch/powerpc/Kconfig +++ b/trunk/arch/powerpc/Kconfig @@ -704,7 +704,7 @@ config PPC_PCI_CHOICE config PCI bool "PCI support" if PPC_PCI_CHOICE default y if !40x && !CPM2 && !8xx && !PPC_83xx \ - && !PPC_85xx && !PPC_86xx + && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx select ARCH_SUPPORTS_MSI diff --git a/trunk/arch/powerpc/Kconfig.debug b/trunk/arch/powerpc/Kconfig.debug index bf3382f1904d..5cdd7ed9a12e 100644 --- a/trunk/arch/powerpc/Kconfig.debug +++ b/trunk/arch/powerpc/Kconfig.debug @@ -254,6 +254,14 @@ config PPC_EARLY_DEBUG_CPM using a CPM-based serial port. This assumes that the bootwrapper has run, and set up the CPM in a particular way. +config PPC_EARLY_DEBUG_USBGECKO + bool "Early debugging through the USB Gecko adapter" + depends on GAMECUBE_COMMON + select USBGECKO_UDBG + help + Select this to enable early debugging for Nintendo GameCube/Wii + consoles via an external USB Gecko adapter. + endchoice config PPC_EARLY_DEBUG_44x_PHYSLOW diff --git a/trunk/arch/powerpc/boot/Makefile b/trunk/arch/powerpc/boot/Makefile index 7bfc8ad87798..bb2465bcb327 100644 --- a/trunk/arch/powerpc/boot/Makefile +++ b/trunk/arch/powerpc/boot/Makefile @@ -66,7 +66,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ - fsl-soc.c mpc8xx.c pq2.c + fsl-soc.c mpc8xx.c pq2.c ugecon.c src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ @@ -76,7 +76,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c + cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \ + gamecube-head.S gamecube.c wii-head.S wii.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -254,6 +255,8 @@ image-$(CONFIG_KSI8560) += cuImage.ksi8560 image-$(CONFIG_STORCENTER) += cuImage.storcenter image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_PPC_C2K) += cuImage.c2k +image-$(CONFIG_GAMECUBE) += dtbImage.gamecube +image-$(CONFIG_WII) += dtbImage.wii # Board port in arch/powerpc/platform/amigaone/Kconfig image-$(CONFIG_AMIGAONE) += cuImage.amigaone diff --git a/trunk/arch/powerpc/boot/dts/gamecube.dts b/trunk/arch/powerpc/boot/dts/gamecube.dts new file mode 100644 index 000000000000..ef3be0e58b02 --- /dev/null +++ b/trunk/arch/powerpc/boot/dts/gamecube.dts @@ -0,0 +1,114 @@ +/* + * arch/powerpc/boot/dts/gamecube.dts + * + * Nintendo GameCube platform device tree source + * Copyright (C) 2007-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/ { + model = "nintendo,gamecube"; + compatible = "nintendo,gamecube"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x01800000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,gekko@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <486000000>; /* 486MHz */ + bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */ + timebase-frequency = <40500000>; /* 162MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained int the flipper chipset */ + flipper { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper"; + ranges = <0x0c000000 0x0c000000 0x00010000>; + interrupt-parent = <&PIC>; + + video@0c002000 { + compatible = "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@0c003000 { + compatible = "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC: pic { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@0c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + + memory@0 { + compatible = "nintendo,flipper-aram"; + reg = <0 0x1000000>; /* 16MB */ + }; + }; + + disk@0c006000 { + compatible = "nintendo,flipper-di"; + reg = <0x0c006000 0x40>; + interrupts = <2>; + }; + + audio@0c006c00 { + compatible = "nintendo,flipper-ai"; + reg = <0x0c006c00 0x20>; + interrupts = <6>; + }; + + gamepad-controller@0c006400 { + compatible = "nintendo,flipper-si"; + reg = <0x0c006400 0x100>; + interrupts = <3>; + }; + + /* External Interface bus */ + exi@0c006800 { + compatible = "nintendo,flipper-exi"; + reg = <0x0c006800 0x40>; + virtual-reg = <0x0c006800>; + interrupts = <4>; + }; + }; +}; + diff --git a/trunk/arch/powerpc/boot/dts/wii.dts b/trunk/arch/powerpc/boot/dts/wii.dts new file mode 100644 index 000000000000..77528c9a8dbd --- /dev/null +++ b/trunk/arch/powerpc/boot/dts/wii.dts @@ -0,0 +1,218 @@ +/* + * arch/powerpc/boot/dts/wii.dts + * + * Nintendo Wii platform device tree source + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/* + * This is commented-out for now. + * Until a later patch is merged, the kernel can use only the first + * contiguous RAM range and will BUG() if the memreserve is outside + * that range. + */ +/*/memreserve/ 0x10000000 0x0004000;*/ /* DSP RAM */ + +/ { + model = "nintendo,wii"; + compatible = "nintendo,wii"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x01800000 /* MEM1 24MB 1T-SRAM */ + 0x10000000 0x04000000>; /* MEM2 64MB GDDR3 */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,broadway@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <729000000>; /* 729MHz */ + bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */ + timebase-frequency = <60750000>; /* 243MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained in the hollywood chipset */ + hollywood { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood"; + ranges = <0x0c000000 0x0c000000 0x01000000 + 0x0d000000 0x0d000000 0x00800000 + 0x0d800000 0x0d800000 0x00800000>; + interrupt-parent = <&PIC0>; + + video@0c002000 { + compatible = "nintendo,hollywood-vi", + "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@0c003000 { + compatible = "nintendo,hollywood-pi", + "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC0: pic0 { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@0c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood-dsp", + "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + }; + + gamepad-controller@0d006400 { + compatible = "nintendo,hollywood-si", + "nintendo,flipper-si"; + reg = <0x0d006400 0x100>; + interrupts = <3>; + }; + + audio@0c006c00 { + compatible = "nintendo,hollywood-ai", + "nintendo,flipper-ai"; + reg = <0x0d006c00 0x20>; + interrupts = <6>; + }; + + /* External Interface bus */ + exi@0d006800 { + compatible = "nintendo,hollywood-exi", + "nintendo,flipper-exi"; + reg = <0x0d006800 0x40>; + virtual-reg = <0x0d006800>; + interrupts = <4>; + }; + + usb@0d040000 { + compatible = "nintendo,hollywood-usb-ehci", + "usb-ehci"; + reg = <0x0d040000 0x100>; + interrupts = <4>; + interrupt-parent = <&PIC1>; + }; + + usb@0d050000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d050000 0x100>; + interrupts = <5>; + interrupt-parent = <&PIC1>; + }; + + usb@0d060000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d060000 0x100>; + interrupts = <6>; + interrupt-parent = <&PIC1>; + }; + + sd@0d070000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d070000 0x200>; + interrupts = <7>; + interrupt-parent = <&PIC1>; + }; + + sdio@0d080000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d080000 0x200>; + interrupts = <8>; + interrupt-parent = <&PIC1>; + }; + + ipc@0d000000 { + compatible = "nintendo,hollywood-ipc"; + reg = <0x0d000000 0x10>; + interrupts = <30>; + interrupt-parent = <&PIC1>; + }; + + PIC1: pic1@0d800030 { + #interrupt-cells = <1>; + compatible = "nintendo,hollywood-pic"; + reg = <0x0d800030 0x10>; + interrupt-controller; + interrupts = <14>; + }; + + GPIO: gpio@0d8000c0 { + #gpio-cells = <2>; + compatible = "nintendo,hollywood-gpio"; + reg = <0x0d8000c0 0x40>; + gpio-controller; + + /* + * This is commented out while a standard binding + * for i2c over gpio is defined. + */ + /* + i2c-video { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + + gpios = <&GPIO 15 0 + &GPIO 14 0>; + clock-frequency = <250000>; + no-clock-stretching; + scl-is-open-drain; + sda-is-open-drain; + sda-enforce-dir; + + AVE: audio-video-encoder@70 { + compatible = "nintendo,wii-audio-video-encoder"; + reg = <0x70>; + }; + }; + */ + }; + + control@0d800100 { + compatible = "nintendo,hollywood-control"; + reg = <0x0d800100 0x300>; + }; + + disk@0d806000 { + compatible = "nintendo,hollywood-di"; + reg = <0x0d806000 0x40>; + interrupts = <2>; + }; + }; +}; + diff --git a/trunk/arch/powerpc/boot/gamecube-head.S b/trunk/arch/powerpc/boot/gamecube-head.S new file mode 100644 index 000000000000..65a9b2a3bf33 --- /dev/null +++ b/trunk/arch/powerpc/boot/gamecube-head.S @@ -0,0 +1,111 @@ +/* + * arch/powerpc/boot/gamecube-head.S + * + * Nintendo GameCube bootwrapper entry. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include "ppc_asm.h" + +/* + * The entry code does no assumptions regarding: + * - if the data and instruction caches are enabled or not + * - if the MMU is enabled or not + * + * We enable the caches if not already enabled, enable the MMU with an + * identity mapping scheme and jump to the start code. + */ + + .text + + .globl _zimage_start +_zimage_start: + + /* turn the MMU off */ + mfmsr 9 + rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */ + bcl 20, 31, 1f +1: + mflr 8 + clrlwi 8, 8, 3 /* convert to a real address */ + addi 8, 8, _mmu_off - 1b + mtsrr0 8 + mtsrr1 9 + rfi +_mmu_off: + /* MMU disabled */ + + /* setup BATs */ + isync + li 8, 0 + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x212, 8 /* IBAT1U */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x218, 8 /* DBAT0U */ + mtspr 0x21a, 8 /* DBAT1U */ + mtspr 0x21c, 8 /* DBAT2U */ + mtspr 0x21e, 8 /* DBAT3U */ + + li 8, 0x01ff /* first 16MiB */ + li 9, 0x0002 /* rw */ + mtspr 0x211, 9 /* IBAT0L */ + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x219, 9 /* DBAT0L */ + mtspr 0x218, 8 /* DBAT0U */ + + lis 8, 0x0c00 /* I/O mem */ + ori 8, 8, 0x3ff /* 32MiB */ + lis 9, 0x0c00 + ori 9, 9, 0x002a /* uncached, guarded, rw */ + mtspr 0x21b, 9 /* DBAT1L */ + mtspr 0x21a, 8 /* DBAT1U */ + + lis 8, 0x0100 /* next 8MiB */ + ori 8, 8, 0x00ff /* 8MiB */ + lis 9, 0x0100 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x215, 9 /* IBAT2L */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x21d, 9 /* DBAT2L */ + mtspr 0x21c, 8 /* DBAT2U */ + + /* enable and invalidate the caches if not already enabled */ + mfspr 8, 0x3f0 /* HID0 */ + andi. 0, 8, (1<<15) /* HID0_ICE */ + bne 1f + ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/ +1: + andi. 0, 8, (1<<14) /* HID0_DCE */ + bne 1f + ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/ +1: + mtspr 0x3f0, 8 /* HID0 */ + isync + + /* initialize arguments */ + li 3, 0 + li 4, 0 + li 5, 0 + + /* turn the MMU on */ + bcl 20, 31, 1f +1: + mflr 8 + addi 8, 8, _mmu_on - 1b + mfmsr 9 + ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */ + mtsrr0 8 + mtsrr1 9 + sync + rfi +_mmu_on: + b _zimage_start_lib + diff --git a/trunk/arch/powerpc/boot/gamecube.c b/trunk/arch/powerpc/boot/gamecube.c new file mode 100644 index 000000000000..28ae7057be5e --- /dev/null +++ b/trunk/arch/powerpc/boot/gamecube.c @@ -0,0 +1,35 @@ +/* + * arch/powerpc/boot/gamecube.c + * + * Nintendo GameCube bootwrapper support + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + +#include "ugecon.h" + +BSS_STACK(8192); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize = 16*1024*1024 - (u32)_end; + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + + if (ug_probe()) + console_ops.write = ug_console_write; +} + diff --git a/trunk/arch/powerpc/boot/ugecon.c b/trunk/arch/powerpc/boot/ugecon.c new file mode 100644 index 000000000000..50609ea6ddf8 --- /dev/null +++ b/trunk/arch/powerpc/boot/ugecon.c @@ -0,0 +1,147 @@ +/* + * arch/powerpc/boot/ugecon.c + * + * USB Gecko bootwrapper console. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + + +#define EXI_CLK_32MHZ 5 + +#define EXI_CSR 0x00 +#define EXI_CSR_CLKMASK (0x7<<4) +#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4) +#define EXI_CSR_CSMASK (0x7<<7) +#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */ + +#define EXI_CR 0x0c +#define EXI_CR_TSTART (1<<0) +#define EXI_CR_WRITE (1<<2) +#define EXI_CR_READ_WRITE (2<<2) +#define EXI_CR_TLEN(len) (((len)-1)<<4) + +#define EXI_DATA 0x10 + + +/* virtual address base for input/output, retrieved from device tree */ +static void *ug_io_base; + + +static u32 ug_io_transaction(u32 in) +{ + u32 *csr_reg = ug_io_base + EXI_CSR; + u32 *data_reg = ug_io_base + EXI_DATA; + u32 *cr_reg = ug_io_base + EXI_CR; + u32 csr, data, cr; + + /* select */ + csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0; + out_be32(csr_reg, csr); + + /* read/write */ + data = in; + out_be32(data_reg, data); + cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART; + out_be32(cr_reg, cr); + + while (in_be32(cr_reg) & EXI_CR_TSTART) + barrier(); + + /* deselect */ + out_be32(csr_reg, 0); + + data = in_be32(data_reg); + return data; +} + +static int ug_is_txfifo_ready(void) +{ + return ug_io_transaction(0xc0000000) & 0x04000000; +} + +static void ug_raw_putc(char ch) +{ + ug_io_transaction(0xb0000000 | (ch << 20)); +} + +static void ug_putc(char ch) +{ + int count = 16; + + if (!ug_io_base) + return; + + while (!ug_is_txfifo_ready() && count--) + barrier(); + if (count) + ug_raw_putc(ch); +} + +void ug_console_write(const char *buf, int len) +{ + char *b = (char *)buf; + + while (len--) { + if (*b == '\n') + ug_putc('\r'); + ug_putc(*b++); + } +} + +static int ug_is_adapter_present(void) +{ + if (!ug_io_base) + return 0; + return ug_io_transaction(0x90000000) == 0x04700000; +} + +static void *ug_grab_exi_io_base(void) +{ + u32 v; + void *devp; + + devp = find_node_by_compatible(NULL, "nintendo,flipper-exi"); + if (devp == NULL) + goto err_out; + if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) + goto err_out; + + return (void *)v; + +err_out: + return NULL; +} + +void *ug_probe(void) +{ + void *exi_io_base; + int i; + + exi_io_base = ug_grab_exi_io_base(); + if (!exi_io_base) + return NULL; + + /* look for a usbgecko on memcard slots A and B */ + for (i = 0; i < 2; i++) { + ug_io_base = exi_io_base + 0x14 * i; + if (ug_is_adapter_present()) + break; + } + if (i == 2) + ug_io_base = NULL; + return ug_io_base; +} + diff --git a/trunk/arch/powerpc/boot/ugecon.h b/trunk/arch/powerpc/boot/ugecon.h new file mode 100644 index 000000000000..43737539169b --- /dev/null +++ b/trunk/arch/powerpc/boot/ugecon.h @@ -0,0 +1,24 @@ +/* + * arch/powerpc/boot/ugecon.h + * + * USB Gecko early bootwrapper console. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __UGECON_H +#define __UGECON_H + +extern void *ug_probe(void); + +extern void ug_putc(char ch); +extern void ug_console_write(const char *buf, int len); + +#endif /* __UGECON_H */ + diff --git a/trunk/arch/powerpc/boot/wii-head.S b/trunk/arch/powerpc/boot/wii-head.S new file mode 100644 index 000000000000..edd79b836fcf --- /dev/null +++ b/trunk/arch/powerpc/boot/wii-head.S @@ -0,0 +1,142 @@ +/* + * arch/powerpc/boot/wii-head.S + * + * Nintendo Wii bootwrapper entry. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include "ppc_asm.h" + +/* + * The entry code does no assumptions regarding: + * - if the data and instruction caches are enabled or not + * - if the MMU is enabled or not + * - if the high BATs are enabled or not + * + * We enable the high BATs, enable the caches if not already enabled, + * enable the MMU with an identity mapping scheme and jump to the start code. + */ + + .text + + .globl _zimage_start +_zimage_start: + + /* turn the MMU off */ + mfmsr 9 + rlwinm 9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */ + bcl 20, 31, 1f +1: + mflr 8 + clrlwi 8, 8, 3 /* convert to a real address */ + addi 8, 8, _mmu_off - 1b + mtsrr0 8 + mtsrr1 9 + rfi +_mmu_off: + /* MMU disabled */ + + /* setup BATs */ + isync + li 8, 0 + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x212, 8 /* IBAT1U */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x218, 8 /* DBAT0U */ + mtspr 0x21a, 8 /* DBAT1U */ + mtspr 0x21c, 8 /* DBAT2U */ + mtspr 0x21e, 8 /* DBAT3U */ + + mtspr 0x230, 8 /* IBAT4U */ + mtspr 0x232, 8 /* IBAT5U */ + mtspr 0x234, 8 /* IBAT6U */ + mtspr 0x236, 8 /* IBAT7U */ + mtspr 0x238, 8 /* DBAT4U */ + mtspr 0x23a, 8 /* DBAT5U */ + mtspr 0x23c, 8 /* DBAT6U */ + mtspr 0x23e, 8 /* DBAT7U */ + + li 8, 0x01ff /* first 16MiB */ + li 9, 0x0002 /* rw */ + mtspr 0x211, 9 /* IBAT0L */ + mtspr 0x210, 8 /* IBAT0U */ + mtspr 0x219, 9 /* DBAT0L */ + mtspr 0x218, 8 /* DBAT0U */ + + lis 8, 0x0c00 /* I/O mem */ + ori 8, 8, 0x3ff /* 32MiB */ + lis 9, 0x0c00 + ori 9, 9, 0x002a /* uncached, guarded, rw */ + mtspr 0x21b, 9 /* DBAT1L */ + mtspr 0x21a, 8 /* DBAT1U */ + + lis 8, 0x0100 /* next 8MiB */ + ori 8, 8, 0x00ff /* 8MiB */ + lis 9, 0x0100 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x215, 9 /* IBAT2L */ + mtspr 0x214, 8 /* IBAT2U */ + mtspr 0x21d, 9 /* DBAT2L */ + mtspr 0x21c, 8 /* DBAT2U */ + + lis 8, 0x1000 /* MEM2 */ + ori 8, 8, 0x07ff /* 64MiB */ + lis 9, 0x1000 + ori 9, 9, 0x0002 /* rw */ + mtspr 0x216, 8 /* IBAT3U */ + mtspr 0x217, 9 /* IBAT3L */ + mtspr 0x21e, 8 /* DBAT3U */ + mtspr 0x21f, 9 /* DBAT3L */ + + /* enable the high BATs */ + mfspr 8, 0x3f3 /* HID4 */ + oris 8, 8, 0x0200 + mtspr 0x3f3, 8 /* HID4 */ + + /* enable and invalidate the caches if not already enabled */ + mfspr 8, 0x3f0 /* HID0 */ + andi. 0, 8, (1<<15) /* HID0_ICE */ + bne 1f + ori 8, 8, (1<<15)|(1<<11) /* HID0_ICE|HID0_ICFI*/ +1: + andi. 0, 8, (1<<14) /* HID0_DCE */ + bne 1f + ori 8, 8, (1<<14)|(1<<10) /* HID0_DCE|HID0_DCFI*/ +1: + mtspr 0x3f0, 8 /* HID0 */ + isync + + /* initialize arguments */ + li 3, 0 + li 4, 0 + li 5, 0 + + /* turn the MMU on */ + bcl 20, 31, 1f +1: + mflr 8 + addi 8, 8, _mmu_on - 1b + mfmsr 9 + ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */ + mtsrr0 8 + mtsrr1 9 + sync + rfi +_mmu_on: + /* turn on the front blue led (aka: yay! we got here!) */ + lis 8, 0x0d00 + ori 8, 8, 0x00c0 + lwz 9, 0(8) + ori 9, 9, 0x20 + stw 9, 0(8) + + b _zimage_start_lib + diff --git a/trunk/arch/powerpc/boot/wii.c b/trunk/arch/powerpc/boot/wii.c new file mode 100644 index 000000000000..2ebaec0344dd --- /dev/null +++ b/trunk/arch/powerpc/boot/wii.c @@ -0,0 +1,158 @@ +/* + * arch/powerpc/boot/wii.c + * + * Nintendo Wii bootwrapper support + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include +#include "stdio.h" +#include "types.h" +#include "io.h" +#include "ops.h" + +#include "ugecon.h" + +BSS_STACK(8192); + +#define HW_REG(x) ((void *)(x)) + +#define EXI_CTRL HW_REG(0x0d800070) +#define EXI_CTRL_ENABLE (1<<0) + +#define MEM2_TOP (0x10000000 + 64*1024*1024) +#define FIRMWARE_DEFAULT_SIZE (12*1024*1024) + + +struct mipc_infohdr { + char magic[3]; + u8 version; + u32 mem2_boundary; + u32 ipc_in; + size_t ipc_in_size; + u32 ipc_out; + size_t ipc_out_size; +}; + +static int mipc_check_address(u32 pa) +{ + /* only MEM2 addresses */ + if (pa < 0x10000000 || pa > 0x14000000) + return -EINVAL; + return 0; +} + +static struct mipc_infohdr *mipc_get_infohdr(void) +{ + struct mipc_infohdr **hdrp, *hdr; + + /* 'mini' header pointer is the last word of MEM2 memory */ + hdrp = (struct mipc_infohdr **)0x13fffffc; + if (mipc_check_address((u32)hdrp)) { + printf("mini: invalid hdrp %08X\n", (u32)hdrp); + hdr = NULL; + goto out; + } + + hdr = *hdrp; + if (mipc_check_address((u32)hdr)) { + printf("mini: invalid hdr %08X\n", (u32)hdr); + hdr = NULL; + goto out; + } + if (memcmp(hdr->magic, "IPC", 3)) { + printf("mini: invalid magic\n"); + hdr = NULL; + goto out; + } + +out: + return hdr; +} + +static int mipc_get_mem2_boundary(u32 *mem2_boundary) +{ + struct mipc_infohdr *hdr; + int error; + + hdr = mipc_get_infohdr(); + if (!hdr) { + error = -1; + goto out; + } + + if (mipc_check_address(hdr->mem2_boundary)) { + printf("mini: invalid mem2_boundary %08X\n", + hdr->mem2_boundary); + error = -EINVAL; + goto out; + } + *mem2_boundary = hdr->mem2_boundary; + error = 0; +out: + return error; + +} + +static void platform_fixups(void) +{ + void *mem; + u32 reg[4]; + u32 mem2_boundary; + int len; + int error; + + mem = finddevice("/memory"); + if (!mem) + fatal("Can't find memory node\n"); + + /* two ranges of (address, size) words */ + len = getprop(mem, "reg", reg, sizeof(reg)); + if (len != sizeof(reg)) { + /* nothing to do */ + goto out; + } + + /* retrieve MEM2 boundary from 'mini' */ + error = mipc_get_mem2_boundary(&mem2_boundary); + if (error) { + /* if that fails use a sane value */ + mem2_boundary = MEM2_TOP - FIRMWARE_DEFAULT_SIZE; + } + + if (mem2_boundary > reg[2] && mem2_boundary < reg[2] + reg[3]) { + reg[3] = mem2_boundary - reg[2]; + printf("top of MEM2 @ %08X\n", reg[2] + reg[3]); + setprop(mem, "reg", reg, sizeof(reg)); + } + +out: + return; +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize = 24*1024*1024 - (u32)_end; + + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + + /* + * 'mini' boots the Broadway processor with EXI disabled. + * We need it enabled before probing for the USB Gecko. + */ + out_be32(EXI_CTRL, in_be32(EXI_CTRL) | EXI_CTRL_ENABLE); + + if (ug_probe()) + console_ops.write = ug_console_write; + + platform_ops.fixups = platform_fixups; +} + diff --git a/trunk/arch/powerpc/boot/wrapper b/trunk/arch/powerpc/boot/wrapper index ac9e9a58b2b0..390512ae7f86 100755 --- a/trunk/arch/powerpc/boot/wrapper +++ b/trunk/arch/powerpc/boot/wrapper @@ -230,6 +230,10 @@ xpedite52*) link_address='0x1400000' platformo=$object/cuboot-85xx.o ;; +gamecube|wii) + link_address='0x600000' + platformo="$object/$platform-head.o $object/$platform.o" + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" diff --git a/trunk/arch/powerpc/configs/gamecube_defconfig b/trunk/arch/powerpc/configs/gamecube_defconfig new file mode 100644 index 000000000000..942e1193e9e4 --- /dev/null +++ b/trunk/arch/powerpc/configs/gamecube_defconfig @@ -0,0 +1,1061 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Sun Nov 22 21:07:30 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_PPC_BOOK3S_32=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y +# CONFIG_SMP is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-gcn" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +CONFIG_PERF_COUNTERS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_LINKSTATION is not set +# CONFIG_STORCENTER is not set +# CONFIG_MPC7448HPC2 is not set +# CONFIG_PPC_HOLLY is not set +# CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set +CONFIG_GAMECUBE_COMMON=y +CONFIG_USBGECKO_UDBG=y +CONFIG_FLIPPER_PIC=y +CONFIG_GAMECUBE=y +# CONFIG_WII is not set +# CONFIG_AMIGAONE is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +CONFIG_ADVANCED_OPTIONS=y +# CONFIG_LOWMEM_SIZE_BOOL is not set +CONFIG_LOWMEM_SIZE=0x30000000 +# CONFIG_PAGE_OFFSET_BOOL is not set +CONFIG_PAGE_OFFSET=0xc0000000 +# CONFIG_KERNEL_START_BOOL is not set +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +# CONFIG_TASK_SIZE_BOOL is not set +CONFIG_TASK_SIZE=0xc0000000 +# CONFIG_CONSISTENT_SIZE_BOOL is not set +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=64 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_OF is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PPC=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_GENERIC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_BOOT_TRACER=y +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +CONFIG_DMA_API_DEBUG=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +# CONFIG_PPC_EARLY_DEBUG_44x is not set +# CONFIG_PPC_EARLY_DEBUG_40x is not set +# CONFIG_PPC_EARLY_DEBUG_CPM is not set +CONFIG_PPC_EARLY_DEBUG_USBGECKO=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/wii_defconfig b/trunk/arch/powerpc/configs/wii_defconfig new file mode 100644 index 000000000000..c386828c639a --- /dev/null +++ b/trunk/arch/powerpc/configs/wii_defconfig @@ -0,0 +1,1406 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Sun Nov 22 20:37:21 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_PPC_BOOK3S_32=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y +# CONFIG_SMP is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-wii" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +CONFIG_PERF_COUNTERS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_LINKSTATION is not set +# CONFIG_STORCENTER is not set +# CONFIG_MPC7448HPC2 is not set +# CONFIG_PPC_HOLLY is not set +# CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set +CONFIG_GAMECUBE_COMMON=y +CONFIG_USBGECKO_UDBG=y +CONFIG_FLIPPER_PIC=y +# CONFIG_GAMECUBE is not set +CONFIG_HLWD_PIC=y +CONFIG_STARLET_MINI=y +CONFIG_WII=y +# CONFIG_AMIGAONE is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +CONFIG_ADVANCED_OPTIONS=y +# CONFIG_LOWMEM_SIZE_BOOL is not set +CONFIG_LOWMEM_SIZE=0x30000000 +# CONFIG_PAGE_OFFSET_BOOL is not set +CONFIG_PAGE_OFFSET=0xc0000000 +# CONFIG_KERNEL_START_BOOL is not set +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +# CONFIG_TASK_SIZE_BOOL is not set +CONFIG_TASK_SIZE=0xc0000000 +# CONFIG_CONSISTENT_SIZE_BOOL is not set +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +# CONFIG_BT_SCO is not set +CONFIG_BT_RFCOMM=y +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +CONFIG_B43=y +CONFIG_B43_SDIO=y +CONFIG_B43_PIO=y +# CONFIG_B43_PHY_LP is not set +CONFIG_B43_DEBUG=y +# CONFIG_B43_FORCE_PIO is not set +# CONFIG_B43LEGACY is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=64 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_SILENT is not set +CONFIG_SSB_DEBUG=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_OF is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PPC=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_APPLE=m +CONFIG_HID_WACOM=m +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_SDHCI_OF is not set +# CONFIG_MMC_SDHCI_PLTFM is not set +# CONFIG_MMC_WBSD is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_GENERIC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_BOOT_TRACER=y +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +CONFIG_DMA_API_DEBUG=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +# CONFIG_PPC_EARLY_DEBUG_44x is not set +# CONFIG_PPC_EARLY_DEBUG_40x is not set +# CONFIG_PPC_EARLY_DEBUG_CPM is not set +CONFIG_PPC_EARLY_DEBUG_USBGECKO=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/include/asm/asm-offsets.h b/trunk/arch/powerpc/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/powerpc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/powerpc/include/asm/async_tx.h b/trunk/arch/powerpc/include/asm/async_tx.h new file mode 100644 index 000000000000..8b2dc55d01ab --- /dev/null +++ b/trunk/arch/powerpc/include/asm/async_tx.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2008-2009 DENX Software Engineering. + * + * Author: Yuri Tikhonov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called COPYING. + */ +#ifndef _ASM_POWERPC_ASYNC_TX_H_ +#define _ASM_POWERPC_ASYNC_TX_H_ + +#if defined(CONFIG_440SPe) || defined(CONFIG_440SP) +extern struct dma_chan * +ppc440spe_async_tx_find_best_channel(enum dma_transaction_type cap, + struct page **dst_lst, int dst_cnt, struct page **src_lst, + int src_cnt, size_t src_sz); + +#define async_tx_find_channel(dep, cap, dst_lst, dst_cnt, src_lst, \ + src_cnt, src_sz) \ + ppc440spe_async_tx_find_best_channel(cap, dst_lst, dst_cnt, src_lst, \ + src_cnt, src_sz) +#else + +#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \ + __async_tx_find_channel(dep, type) + +struct dma_chan * +__async_tx_find_channel(struct async_submit_ctl *submit, + enum dma_transaction_type tx_type); + +#endif + +#endif diff --git a/trunk/arch/powerpc/include/asm/dcr-regs.h b/trunk/arch/powerpc/include/asm/dcr-regs.h index 828e3aa1f2fc..380274de429f 100644 --- a/trunk/arch/powerpc/include/asm/dcr-regs.h +++ b/trunk/arch/powerpc/include/asm/dcr-regs.h @@ -157,4 +157,27 @@ #define L2C_SNP_SSR_32G 0x0000f000 #define L2C_SNP_ESR 0x00000800 +/* + * DCR register offsets for 440SP/440SPe I2O/DMA controller. + * The base address is configured in the device tree. + */ +#define DCRN_I2O0_IBAL 0x006 +#define DCRN_I2O0_IBAH 0x007 +#define I2O_REG_ENABLE 0x00000001 /* Enable I2O/DMA access */ + +/* 440SP/440SPe Software Reset DCR */ +#define DCRN_SDR0_SRST 0x0200 +#define DCRN_SDR0_SRST_I2ODMA (0x80000000 >> 15) /* Reset I2O/DMA */ + +/* 440SP/440SPe Memory Queue DCR offsets */ +#define DCRN_MQ0_XORBA 0x04 +#define DCRN_MQ0_CF2H 0x06 +#define DCRN_MQ0_CFBHL 0x0f +#define DCRN_MQ0_BAUH 0x10 + +/* HB/LL Paths Configuration Register */ +#define MQ0_CFBHL_TPLM 28 +#define MQ0_CFBHL_HBCL 23 +#define MQ0_CFBHL_POLY 15 + #endif /* __DCR_REGS_H__ */ diff --git a/trunk/arch/powerpc/include/asm/dma-mapping.h b/trunk/arch/powerpc/include/asm/dma-mapping.h index e281daebddca..80a973bb9e71 100644 --- a/trunk/arch/powerpc/include/asm/dma-mapping.h +++ b/trunk/arch/powerpc/include/asm/dma-mapping.h @@ -197,7 +197,7 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) if (!dev->dma_mask) return 0; - return addr + size <= *dev->dma_mask; + return addr + size - 1 <= *dev->dma_mask; } static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) diff --git a/trunk/arch/powerpc/include/asm/elf.h b/trunk/arch/powerpc/include/asm/elf.h index 014a624f4c8e..17828ad411eb 100644 --- a/trunk/arch/powerpc/include/asm/elf.h +++ b/trunk/arch/powerpc/include/asm/elf.h @@ -170,7 +170,6 @@ typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; #define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) #define compat_elf_check_arch(x) ((x)->e_machine == EM_PPC) -#define USE_ELF_CORE_DUMP #define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE PAGE_SIZE diff --git a/trunk/arch/powerpc/include/asm/fixmap.h b/trunk/arch/powerpc/include/asm/fixmap.h index f1f4e23a84e9..5c2c0233175e 100644 --- a/trunk/arch/powerpc/include/asm/fixmap.h +++ b/trunk/arch/powerpc/include/asm/fixmap.h @@ -44,6 +44,9 @@ */ enum fixed_addresses { FIX_HOLE, + /* reserve the top 128K for early debugging purposes */ + FIX_EARLY_DEBUG_TOP = FIX_HOLE, + FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+((128*1024)/PAGE_SIZE)-1, #ifdef CONFIG_HIGHMEM FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, diff --git a/trunk/arch/powerpc/include/asm/module.h b/trunk/arch/powerpc/include/asm/module.h index 08454880a2c0..0192a4ee2bc2 100644 --- a/trunk/arch/powerpc/include/asm/module.h +++ b/trunk/arch/powerpc/include/asm/module.h @@ -87,5 +87,10 @@ struct exception_table_entry; void sort_ex_table(struct exception_table_entry *start, struct exception_table_entry *finish); +#ifdef CONFIG_MODVERSIONS +#define ARCH_RELOCATES_KCRCTAB + +extern const unsigned long reloc_start[]; +#endif #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MODULE_H */ diff --git a/trunk/arch/powerpc/include/asm/ptrace.h b/trunk/arch/powerpc/include/asm/ptrace.h index 8c341490cfc5..cbd759e3cd78 100644 --- a/trunk/arch/powerpc/include/asm/ptrace.h +++ b/trunk/arch/powerpc/include/asm/ptrace.h @@ -140,6 +140,8 @@ extern void user_enable_single_step(struct task_struct *); extern void user_enable_block_step(struct task_struct *); extern void user_disable_single_step(struct task_struct *); +#define ARCH_HAS_USER_SINGLE_STEP_INFO + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/trunk/arch/powerpc/include/asm/udbg.h b/trunk/arch/powerpc/include/asm/udbg.h index cd21e5e6b04f..11ae699135ba 100644 --- a/trunk/arch/powerpc/include/asm/udbg.h +++ b/trunk/arch/powerpc/include/asm/udbg.h @@ -51,6 +51,7 @@ extern void __init udbg_init_btext(void); extern void __init udbg_init_44x_as1(void); extern void __init udbg_init_40x_realmode(void); extern void __init udbg_init_cpm(void); +extern void __init udbg_init_usbgecko(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ diff --git a/trunk/arch/powerpc/kernel/cputable.c b/trunk/arch/powerpc/kernel/cputable.c index 03c862b6a9c4..2fc82bac3bbc 100644 --- a/trunk/arch/powerpc/kernel/cputable.c +++ b/trunk/arch/powerpc/kernel/cputable.c @@ -697,9 +697,9 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "ppc750", }, - { /* 750CL */ - .pvr_mask = 0xfffff0f0, - .pvr_value = 0x00087010, + { /* 750CL (and "Broadway") */ + .pvr_mask = 0xfffff0e0, + .pvr_value = 0x00087000, .cpu_name = "750CL", .cpu_features = CPU_FTRS_750CL, .cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE, diff --git a/trunk/arch/powerpc/kernel/head_32.S b/trunk/arch/powerpc/kernel/head_32.S index 829c3fe7c5a2..e025e89fe93e 100644 --- a/trunk/arch/powerpc/kernel/head_32.S +++ b/trunk/arch/powerpc/kernel/head_32.S @@ -164,6 +164,9 @@ __after_mmu_off: #ifdef CONFIG_PPC_EARLY_DEBUG_CPM bl setup_cpm_bat #endif +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO + bl setup_usbgecko_bat +#endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -1203,6 +1206,28 @@ setup_cpm_bat: blr #endif +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO +setup_usbgecko_bat: + /* prepare a BAT for early io */ +#if defined(CONFIG_GAMECUBE) + lis r8, 0x0c00 +#elif defined(CONFIG_WII) + lis r8, 0x0d00 +#else +#error Invalid platform for USB Gecko based early debugging. +#endif + /* + * The virtual address used must match the virtual address + * associated to the fixmap entry FIX_EARLY_DEBUG_BASE. + */ + lis r11, 0xfffe /* top 128K */ + ori r8, r8, 0x002a /* uncached, guarded ,rw */ + ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */ + mtspr SPRN_DBAT1L, r8 + mtspr SPRN_DBAT1U, r11 + blr +#endif + #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/trunk/arch/powerpc/kernel/iommu.c b/trunk/arch/powerpc/kernel/iommu.c index fd51578e29dd..5547ae6e6b0b 100644 --- a/trunk/arch/powerpc/kernel/iommu.c +++ b/trunk/arch/powerpc/kernel/iommu.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include #include @@ -251,7 +251,7 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, } ppc_md.tce_free(tbl, entry, npages); - iommu_area_free(tbl->it_map, free_entry, npages); + bitmap_clear(tbl->it_map, free_entry, npages); } static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, diff --git a/trunk/arch/powerpc/kernel/traps.c b/trunk/arch/powerpc/kernel/traps.c index 804f0f30f227..d069ff8a7e03 100644 --- a/trunk/arch/powerpc/kernel/traps.c +++ b/trunk/arch/powerpc/kernel/traps.c @@ -174,6 +174,15 @@ int die(const char *str, struct pt_regs *regs, long err) return 0; } +void user_single_step_siginfo(struct task_struct *tsk, + struct pt_regs *regs, siginfo_t *info) +{ + memset(info, 0, sizeof(*info)); + info->si_signo = SIGTRAP; + info->si_code = TRAP_TRACE; + info->si_addr = (void __user *)regs->nip; +} + void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) { siginfo_t info; diff --git a/trunk/arch/powerpc/kernel/udbg.c b/trunk/arch/powerpc/kernel/udbg.c index fc9af47e2128..e39cad83c884 100644 --- a/trunk/arch/powerpc/kernel/udbg.c +++ b/trunk/arch/powerpc/kernel/udbg.c @@ -60,6 +60,8 @@ void __init udbg_early_init(void) udbg_init_40x_realmode(); #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM) udbg_init_cpm(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO) + udbg_init_usbgecko(); #endif #ifdef CONFIG_PPC_EARLY_DEBUG diff --git a/trunk/arch/powerpc/kernel/vmlinux.lds.S b/trunk/arch/powerpc/kernel/vmlinux.lds.S index 27735a7ac12b..dcd01c82e701 100644 --- a/trunk/arch/powerpc/kernel/vmlinux.lds.S +++ b/trunk/arch/powerpc/kernel/vmlinux.lds.S @@ -38,6 +38,9 @@ jiffies = jiffies_64 + 4; #endif SECTIONS { + . = 0; + reloc_start = .; + . = KERNELBASE; /* diff --git a/trunk/arch/powerpc/mm/40x_mmu.c b/trunk/arch/powerpc/mm/40x_mmu.c index f5e7b9ce63dd..08dfa8e6d86f 100644 --- a/trunk/arch/powerpc/mm/40x_mmu.c +++ b/trunk/arch/powerpc/mm/40x_mmu.c @@ -91,7 +91,7 @@ void __init MMU_init_hw(void) #define LARGE_PAGE_SIZE_16M (1<<24) #define LARGE_PAGE_SIZE_4M (1<<22) -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { unsigned long v, s, mapped; phys_addr_t p; diff --git a/trunk/arch/powerpc/mm/44x_mmu.c b/trunk/arch/powerpc/mm/44x_mmu.c index 98052ac96580..3986264b0993 100644 --- a/trunk/arch/powerpc/mm/44x_mmu.c +++ b/trunk/arch/powerpc/mm/44x_mmu.c @@ -88,7 +88,7 @@ void __init MMU_init_hw(void) flush_instruction_cache(); } -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { unsigned long addr; diff --git a/trunk/arch/powerpc/mm/fsl_booke_mmu.c b/trunk/arch/powerpc/mm/fsl_booke_mmu.c index fcfcb6e976c7..c5394728bf2e 100644 --- a/trunk/arch/powerpc/mm/fsl_booke_mmu.c +++ b/trunk/arch/powerpc/mm/fsl_booke_mmu.c @@ -207,7 +207,7 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) return amount_mapped; } -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1; } diff --git a/trunk/arch/powerpc/mm/init_32.c b/trunk/arch/powerpc/mm/init_32.c index 9ddcfb4dc139..4ec900af332f 100644 --- a/trunk/arch/powerpc/mm/init_32.c +++ b/trunk/arch/powerpc/mm/init_32.c @@ -82,6 +82,11 @@ extern struct task_struct *current_set[NR_CPUS]; int __map_without_bats; int __map_without_ltlbs; +/* + * This tells the system to allow ioremapping memory marked as reserved. + */ +int __allow_ioremap_reserved; + /* max amount of low RAM to map in */ unsigned long __max_low_memory = MAX_LOW_MEM; @@ -131,9 +136,13 @@ void __init MMU_init(void) MMU_setup(); if (lmb.memory.cnt > 1) { +#ifndef CONFIG_WII lmb.memory.cnt = 1; lmb_analyze(); printk(KERN_WARNING "Only using first contiguous memory region"); +#else + wii_memory_fixups(); +#endif } total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr; diff --git a/trunk/arch/powerpc/mm/mmu_decl.h b/trunk/arch/powerpc/mm/mmu_decl.h index e27a990af42d..d49a77503e19 100644 --- a/trunk/arch/powerpc/mm/mmu_decl.h +++ b/trunk/arch/powerpc/mm/mmu_decl.h @@ -104,6 +104,7 @@ extern void setbat(int index, unsigned long virt, phys_addr_t phys, unsigned int size, int flags); extern int __map_without_bats; +extern int __allow_ioremap_reserved; extern unsigned long ioremap_base; extern unsigned int rtas_data, rtas_size; @@ -125,24 +126,32 @@ extern phys_addr_t total_lowmem; extern phys_addr_t memstart_addr; extern phys_addr_t lowmem_end_addr; +#ifdef CONFIG_WII +extern unsigned long wii_hole_start; +extern unsigned long wii_hole_size; + +extern unsigned long wii_mmu_mapin_mem2(unsigned long top); +extern void wii_memory_fixups(void); +#endif + /* ...and now those things that may be slightly different between processor * architectures. -- Dan */ #if defined(CONFIG_8xx) #define MMU_init_hw() do { } while(0) -#define mmu_mapin_ram() (0UL) +#define mmu_mapin_ram(top) (0UL) #elif defined(CONFIG_4xx) extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); +extern unsigned long mmu_mapin_ram(unsigned long top); #elif defined(CONFIG_FSL_BOOKE) extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); +extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); #elif defined(CONFIG_PPC32) /* anything 32-bit except 4xx or 8xx */ extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); +extern unsigned long mmu_mapin_ram(unsigned long top); #endif diff --git a/trunk/arch/powerpc/mm/pgtable_32.c b/trunk/arch/powerpc/mm/pgtable_32.c index cb96cb2e17cc..177e4038b43c 100644 --- a/trunk/arch/powerpc/mm/pgtable_32.c +++ b/trunk/arch/powerpc/mm/pgtable_32.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -191,7 +192,8 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags, * Don't allow anybody to remap normal RAM that we're using. * mem_init() sets high_memory so only do the check after that. */ - if (mem_init_done && (p < virt_to_phys(high_memory))) { + if (mem_init_done && (p < virt_to_phys(high_memory)) && + !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) { printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n", (unsigned long long)p, __builtin_return_address(0)); return NULL; @@ -283,18 +285,18 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) } /* - * Map in a big chunk of physical memory starting at PAGE_OFFSET. + * Map in a chunk of physical memory starting at start. */ -void __init mapin_ram(void) +void __init __mapin_ram_chunk(unsigned long offset, unsigned long top) { unsigned long v, s, f; phys_addr_t p; int ktext; - s = mmu_mapin_ram(); + s = offset; v = PAGE_OFFSET + s; p = memstart_addr + s; - for (; s < total_lowmem; s += PAGE_SIZE) { + for (; s < top; s += PAGE_SIZE) { ktext = ((char *) v >= _stext && (char *) v < etext); f = ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL; map_page(v, p, f); @@ -307,6 +309,30 @@ void __init mapin_ram(void) } } +void __init mapin_ram(void) +{ + unsigned long s, top; + +#ifndef CONFIG_WII + top = total_lowmem; + s = mmu_mapin_ram(top); + __mapin_ram_chunk(s, top); +#else + if (!wii_hole_size) { + s = mmu_mapin_ram(total_lowmem); + __mapin_ram_chunk(s, total_lowmem); + } else { + top = wii_hole_start; + s = mmu_mapin_ram(top); + __mapin_ram_chunk(s, top); + + top = lmb_end_of_DRAM(); + s = wii_mmu_mapin_mem2(top); + __mapin_ram_chunk(s, top); + } +#endif +} + /* Scan the real Linux page tables and return a PTE pointer for * a virtual address in a context. * Returns true (1) if PTE was found, zero otherwise. The pointer to diff --git a/trunk/arch/powerpc/mm/ppc_mmu_32.c b/trunk/arch/powerpc/mm/ppc_mmu_32.c index 2d2a87e10154..f11c2cdcb0fe 100644 --- a/trunk/arch/powerpc/mm/ppc_mmu_32.c +++ b/trunk/arch/powerpc/mm/ppc_mmu_32.c @@ -72,7 +72,7 @@ unsigned long p_mapped_by_bats(phys_addr_t pa) return 0; } -unsigned long __init mmu_mapin_ram(void) +unsigned long __init mmu_mapin_ram(unsigned long top) { unsigned long tot, bl, done; unsigned long max_size = (256<<20); @@ -86,7 +86,7 @@ unsigned long __init mmu_mapin_ram(void) /* Make sure we don't map a block larger than the smallest alignment of the physical address. */ - tot = total_lowmem; + tot = top; for (bl = 128<<10; bl < max_size; bl <<= 1) { if (bl * 2 > tot) break; diff --git a/trunk/arch/powerpc/platforms/52xx/efika.c b/trunk/arch/powerpc/platforms/52xx/efika.c index bcc69e1f77c1..45c0cb9b67e6 100644 --- a/trunk/arch/powerpc/platforms/52xx/efika.c +++ b/trunk/arch/powerpc/platforms/52xx/efika.c @@ -10,7 +10,7 @@ */ #include -#include +#include #include #include #include diff --git a/trunk/arch/powerpc/platforms/Kconfig.cputype b/trunk/arch/powerpc/platforms/Kconfig.cputype index 2eab27a94cc9..fa0f690d3867 100644 --- a/trunk/arch/powerpc/platforms/Kconfig.cputype +++ b/trunk/arch/powerpc/platforms/Kconfig.cputype @@ -311,7 +311,7 @@ config NR_CPUS config NOT_COHERENT_CACHE bool - depends on 4xx || 8xx || E200 || PPC_MPC512x + depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON default y config CHECK_CACHE_COHERENCY diff --git a/trunk/arch/powerpc/platforms/amigaone/setup.c b/trunk/arch/powerpc/platforms/amigaone/setup.c index 9290a7a442d0..fb4eb0df054c 100644 --- a/trunk/arch/powerpc/platforms/amigaone/setup.c +++ b/trunk/arch/powerpc/platforms/amigaone/setup.c @@ -14,7 +14,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/powerpc/platforms/cell/spufs/Makefile b/trunk/arch/powerpc/platforms/cell/spufs/Makefile index b93f877ba504..b9d5d678aa44 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/Makefile +++ b/trunk/arch/powerpc/platforms/cell/spufs/Makefile @@ -13,10 +13,8 @@ SPU_CC := $(SPU_CROSS)gcc SPU_AS := $(SPU_CROSS)gcc SPU_LD := $(SPU_CROSS)ld SPU_OBJCOPY := $(SPU_CROSS)objcopy -SPU_CFLAGS := -O2 -Wall -I$(srctree)/include \ - -I$(objtree)/include2 -D__KERNEL__ -SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include \ - -I$(objtree)/include2 -D__KERNEL__ +SPU_CFLAGS := -O2 -Wall -I$(srctree)/include -D__KERNEL__ +SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include -D__KERNEL__ SPU_LDFLAGS := -N -Ttext=0x0 $(obj)/switch.o: $(obj)/spu_save_dump.h $(obj)/spu_restore_dump.h diff --git a/trunk/arch/powerpc/platforms/chrp/setup.c b/trunk/arch/powerpc/platforms/chrp/setup.c index 52f3df3b4ca0..8f41685d8f42 100644 --- a/trunk/arch/powerpc/platforms/chrp/setup.c +++ b/trunk/arch/powerpc/platforms/chrp/setup.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/trunk/arch/powerpc/platforms/embedded6xx/Kconfig b/trunk/arch/powerpc/platforms/embedded6xx/Kconfig index 291ac9d8cbee..524d971a1478 100644 --- a/trunk/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/trunk/arch/powerpc/platforms/embedded6xx/Kconfig @@ -90,3 +90,36 @@ config MPC10X_OPENPIC config MPC10X_STORE_GATHERING bool "Enable MPC10x store gathering" depends on MPC10X_BRIDGE + +config GAMECUBE_COMMON + bool + +config USBGECKO_UDBG + bool "USB Gecko udbg console for the Nintendo GameCube/Wii" + depends on GAMECUBE_COMMON + help + If you say yes to this option, support will be included for the + USB Gecko adapter as an udbg console. + The USB Gecko is a EXI to USB Serial converter that can be plugged + into a memcard slot in the Nintendo GameCube/Wii. + + This driver bypasses the EXI layer completely. + + If in doubt, say N here. + +config GAMECUBE + bool "Nintendo-GameCube" + depends on EMBEDDED6xx + select GAMECUBE_COMMON + help + Select GAMECUBE if configuring for the Nintendo GameCube. + More information at: + +config WII + bool "Nintendo-Wii" + depends on EMBEDDED6xx + select GAMECUBE_COMMON + help + Select WII if configuring for the Nintendo Wii. + More information at: + diff --git a/trunk/arch/powerpc/platforms/embedded6xx/Makefile b/trunk/arch/powerpc/platforms/embedded6xx/Makefile index 0773c08bd444..66c23e423f40 100644 --- a/trunk/arch/powerpc/platforms/embedded6xx/Makefile +++ b/trunk/arch/powerpc/platforms/embedded6xx/Makefile @@ -7,3 +7,7 @@ obj-$(CONFIG_STORCENTER) += storcenter.o obj-$(CONFIG_PPC_HOLLY) += holly.o obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o obj-$(CONFIG_PPC_C2K) += c2k.o +obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o +obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o +obj-$(CONFIG_GAMECUBE) += gamecube.o +obj-$(CONFIG_WII) += wii.o hlwd-pic.o diff --git a/trunk/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/trunk/arch/powerpc/platforms/embedded6xx/flipper-pic.c new file mode 100644 index 000000000000..d5963285e3be --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -0,0 +1,263 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.c + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "flipper-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include +#include +#include +#include +#include + +#include "flipper-pic.h" + +#define FLIPPER_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves setting/clearing + * the corresponding bit in IMR. + * Except for the RSW interrupt, all interrupts get deasserted automatically + * when the source deasserts the interrupt. + */ +#define FLIPPER_ICR 0x00 +#define FLIPPER_ICR_RSS (1<<16) /* reset switch state */ + +#define FLIPPER_IMR 0x04 + +#define FLIPPER_RESET 0x24 + + +/* + * IRQ chip hooks. + * + */ + +static void flipper_pic_mask_and_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + u32 mask = 1 << irq; + + clrbits32(io_base + FLIPPER_IMR, mask); + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, mask); +} + +static void flipper_pic_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, 1 << irq); +} + +static void flipper_pic_mask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + clrbits32(io_base + FLIPPER_IMR, 1 << irq); +} + +static void flipper_pic_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + setbits32(io_base + FLIPPER_IMR, 1 << irq); +} + + +static struct irq_chip flipper_pic = { + .name = "flipper-pic", + .ack = flipper_pic_ack, + .mask_ack = flipper_pic_mask_and_ack, + .mask = flipper_pic_mask, + .unmask = flipper_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_host *flipper_irq_host; + +static int flipper_pic_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + set_irq_chip_data(virq, h->host_data); + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq); + return 0; +} + +static void flipper_pic_unmap(struct irq_host *h, unsigned int irq) +{ + set_irq_chip_data(irq, NULL); + set_irq_chip(irq, NULL); +} + +static int flipper_pic_match(struct irq_host *h, struct device_node *np) +{ + return 1; +} + + +static struct irq_host_ops flipper_irq_host_ops = { + .map = flipper_pic_map, + .unmap = flipper_pic_unmap, + .match = flipper_pic_match, +}; + +/* + * Platform hooks. + * + */ + +static void __flipper_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + FLIPPER_IMR, 0x00000000); + out_be32(io_base + FLIPPER_ICR, 0xffffffff); +} + +struct irq_host * __init flipper_pic_init(struct device_node *np) +{ + struct device_node *pi; + struct irq_host *irq_host = NULL; + struct resource res; + void __iomem *io_base; + int retval; + + pi = of_get_parent(np); + if (!pi) { + pr_err("no parent found\n"); + goto out; + } + if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) { + pr_err("unexpected parent compatible\n"); + goto out; + } + + retval = of_address_to_resource(pi, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + goto out; + } + io_base = ioremap(res.start, resource_size(&res)); + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __flipper_quiesce(io_base); + + irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, FLIPPER_NR_IRQS, + &flipper_irq_host_ops, -1); + if (!irq_host) { + pr_err("failed to allocate irq_host\n"); + return NULL; + } + + irq_host->host_data = io_base; + +out: + return irq_host; +} + +unsigned int flipper_pic_get_irq(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + FLIPPER_ICR) & + in_be32(io_base + FLIPPER_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(flipper_irq_host, irq); +} + +/* + * Probe function. + * + */ + +void __init flipper_pic_probe(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic"); + BUG_ON(!np); + + flipper_irq_host = flipper_pic_init(np); + BUG_ON(!flipper_irq_host); + + irq_set_default_host(flipper_irq_host); + + of_node_put(np); +} + +/* + * Misc functions related to the flipper chipset. + * + */ + +/** + * flipper_quiesce() - quiesce flipper irq controller + * + * Mask and ack all interrupt sources. + * + */ +void flipper_quiesce(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + + __flipper_quiesce(io_base); +} + +/* + * Resets the platform. + */ +void flipper_platform_reset(void) +{ + void __iomem *io_base; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + out_8(io_base + FLIPPER_RESET, 0x00); + } +} + +/* + * Returns non-zero if the reset button is pressed. + */ +int flipper_is_reset_button_pressed(void) +{ + void __iomem *io_base; + u32 icr; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + icr = in_be32(io_base + FLIPPER_ICR); + return !(icr & FLIPPER_ICR_RSS); + } + return 0; +} + diff --git a/trunk/arch/powerpc/platforms/embedded6xx/flipper-pic.h b/trunk/arch/powerpc/platforms/embedded6xx/flipper-pic.h new file mode 100644 index 000000000000..e339186b5663 --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/flipper-pic.h @@ -0,0 +1,25 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.h + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __FLIPPER_PIC_H +#define __FLIPPER_PIC_H + +unsigned int flipper_pic_get_irq(void); +void __init flipper_pic_probe(void); + +void flipper_quiesce(void); +void flipper_platform_reset(void); +int flipper_is_reset_button_pressed(void); + +#endif diff --git a/trunk/arch/powerpc/platforms/embedded6xx/gamecube.c b/trunk/arch/powerpc/platforms/embedded6xx/gamecube.c new file mode 100644 index 000000000000..1106fd99627f --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/gamecube.c @@ -0,0 +1,118 @@ +/* + * arch/powerpc/platforms/embedded6xx/gamecube.c + * + * Nintendo GameCube board-specific support + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "flipper-pic.h" +#include "usbgecko_udbg.h" + + +static void gamecube_spin(void) +{ + /* spin until power button pressed */ + for (;;) + cpu_relax(); +} + +static void gamecube_restart(char *cmd) +{ + local_irq_disable(); + flipper_platform_reset(); + gamecube_spin(); +} + +static void gamecube_power_off(void) +{ + local_irq_disable(); + gamecube_spin(); +} + +static void gamecube_halt(void) +{ + gamecube_restart(NULL); +} + +static void __init gamecube_init_early(void) +{ + ug_udbg_init(); +} + +static int __init gamecube_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,gamecube")) + return 0; + + return 1; +} + +static void gamecube_shutdown(void) +{ + flipper_quiesce(); +} + +#ifdef CONFIG_KEXEC +static int gamecube_kexec_prepare(struct kimage *image) +{ + return 0; +} +#endif /* CONFIG_KEXEC */ + + +define_machine(gamecube) { + .name = "gamecube", + .probe = gamecube_probe, + .init_early = gamecube_init_early, + .restart = gamecube_restart, + .power_off = gamecube_power_off, + .halt = gamecube_halt, + .init_IRQ = flipper_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = gamecube_shutdown, +#ifdef CONFIG_KEXEC + .machine_kexec_prepare = gamecube_kexec_prepare, +#endif +}; + + +static struct of_device_id gamecube_of_bus[] = { + { .compatible = "nintendo,flipper", }, + { }, +}; + +static int __init gamecube_device_probe(void) +{ + if (!machine_is(gamecube)) + return 0; + + of_platform_bus_probe(NULL, gamecube_of_bus, NULL); + return 0; +} +device_initcall(gamecube_device_probe); + diff --git a/trunk/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/trunk/arch/powerpc/platforms/embedded6xx/hlwd-pic.c new file mode 100644 index 000000000000..dd20bff33207 --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -0,0 +1,241 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.c + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "hlwd-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include +#include +#include +#include +#include + +#include "hlwd-pic.h" + +#define HLWD_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves asserting/clearing + * the corresponding bit in IMR. ACK'ing a request simply involves + * asserting the corresponding bit in ICR. + */ +#define HW_BROADWAY_ICR 0x00 +#define HW_BROADWAY_IMR 0x04 + + +/* + * IRQ chip hooks. + * + */ + +static void hlwd_pic_mask_and_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + u32 mask = 1 << irq; + + clrbits32(io_base + HW_BROADWAY_IMR, mask); + out_be32(io_base + HW_BROADWAY_ICR, mask); +} + +static void hlwd_pic_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + out_be32(io_base + HW_BROADWAY_ICR, 1 << irq); +} + +static void hlwd_pic_mask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + +static void hlwd_pic_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void __iomem *io_base = get_irq_chip_data(virq); + + setbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + + +static struct irq_chip hlwd_pic = { + .name = "hlwd-pic", + .ack = hlwd_pic_ack, + .mask_ack = hlwd_pic_mask_and_ack, + .mask = hlwd_pic_mask, + .unmask = hlwd_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_host *hlwd_irq_host; + +static int hlwd_pic_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + set_irq_chip_data(virq, h->host_data); + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &hlwd_pic, handle_level_irq); + return 0; +} + +static void hlwd_pic_unmap(struct irq_host *h, unsigned int irq) +{ + set_irq_chip_data(irq, NULL); + set_irq_chip(irq, NULL); +} + +static struct irq_host_ops hlwd_irq_host_ops = { + .map = hlwd_pic_map, + .unmap = hlwd_pic_unmap, +}; + +static unsigned int __hlwd_pic_get_irq(struct irq_host *h) +{ + void __iomem *io_base = h->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + HW_BROADWAY_ICR) & + in_be32(io_base + HW_BROADWAY_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(h, irq); +} + +static void hlwd_pic_irq_cascade(unsigned int cascade_virq, + struct irq_desc *desc) +{ + struct irq_host *irq_host = get_irq_data(cascade_virq); + unsigned int virq; + + spin_lock(&desc->lock); + desc->chip->mask(cascade_virq); /* IRQ_LEVEL */ + spin_unlock(&desc->lock); + + virq = __hlwd_pic_get_irq(irq_host); + if (virq != NO_IRQ) + generic_handle_irq(virq); + else + pr_err("spurious interrupt!\n"); + + spin_lock(&desc->lock); + desc->chip->ack(cascade_virq); /* IRQ_LEVEL */ + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) + desc->chip->unmask(cascade_virq); + spin_unlock(&desc->lock); +} + +/* + * Platform hooks. + * + */ + +static void __hlwd_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + HW_BROADWAY_IMR, 0); + out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff); +} + +struct irq_host *hlwd_pic_init(struct device_node *np) +{ + struct irq_host *irq_host; + struct resource res; + void __iomem *io_base; + int retval; + + retval = of_address_to_resource(np, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + return NULL; + } + io_base = ioremap(res.start, resource_size(&res)); + if (!io_base) { + pr_err("ioremap failed\n"); + return NULL; + } + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __hlwd_quiesce(io_base); + + irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, HLWD_NR_IRQS, + &hlwd_irq_host_ops, -1); + if (!irq_host) { + pr_err("failed to allocate irq_host\n"); + return NULL; + } + irq_host->host_data = io_base; + + return irq_host; +} + +unsigned int hlwd_pic_get_irq(void) +{ + return __hlwd_pic_get_irq(hlwd_irq_host); +} + +/* + * Probe function. + * + */ + +void hlwd_pic_probe(void) +{ + struct irq_host *host; + struct device_node *np; + const u32 *interrupts; + int cascade_virq; + + for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") { + interrupts = of_get_property(np, "interrupts", NULL); + if (interrupts) { + host = hlwd_pic_init(np); + BUG_ON(!host); + cascade_virq = irq_of_parse_and_map(np, 0); + set_irq_data(cascade_virq, host); + set_irq_chained_handler(cascade_virq, + hlwd_pic_irq_cascade); + hlwd_irq_host = host; + break; + } + } +} + +/** + * hlwd_quiesce() - quiesce hollywood irq controller + * + * Mask and ack all interrupt sources. + * + */ +void hlwd_quiesce(void) +{ + void __iomem *io_base = hlwd_irq_host->host_data; + + __hlwd_quiesce(io_base); +} + diff --git a/trunk/arch/powerpc/platforms/embedded6xx/hlwd-pic.h b/trunk/arch/powerpc/platforms/embedded6xx/hlwd-pic.h new file mode 100644 index 000000000000..d2e5a092761e --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/hlwd-pic.h @@ -0,0 +1,22 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.h + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __HLWD_PIC_H +#define __HLWD_PIC_H + +extern unsigned int hlwd_pic_get_irq(void); +extern void hlwd_pic_probe(void); +extern void hlwd_quiesce(void); + +#endif diff --git a/trunk/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/trunk/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c new file mode 100644 index 000000000000..edc956cc8b13 --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c @@ -0,0 +1,328 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include + +#include +#include +#include +#include + +#include "usbgecko_udbg.h" + + +#define EXI_CLK_32MHZ 5 + +#define EXI_CSR 0x00 +#define EXI_CSR_CLKMASK (0x7<<4) +#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4) +#define EXI_CSR_CSMASK (0x7<<7) +#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */ + +#define EXI_CR 0x0c +#define EXI_CR_TSTART (1<<0) +#define EXI_CR_WRITE (1<<2) +#define EXI_CR_READ_WRITE (2<<2) +#define EXI_CR_TLEN(len) (((len)-1)<<4) + +#define EXI_DATA 0x10 + +#define UG_READ_ATTEMPTS 100 +#define UG_WRITE_ATTEMPTS 100 + + +static void __iomem *ug_io_base; + +/* + * Performs one input/output transaction between the exi host and the usbgecko. + */ +static u32 ug_io_transaction(u32 in) +{ + u32 __iomem *csr_reg = ug_io_base + EXI_CSR; + u32 __iomem *data_reg = ug_io_base + EXI_DATA; + u32 __iomem *cr_reg = ug_io_base + EXI_CR; + u32 csr, data, cr; + + /* select */ + csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0; + out_be32(csr_reg, csr); + + /* read/write */ + data = in; + out_be32(data_reg, data); + cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART; + out_be32(cr_reg, cr); + + while (in_be32(cr_reg) & EXI_CR_TSTART) + barrier(); + + /* deselect */ + out_be32(csr_reg, 0); + + /* result */ + data = in_be32(data_reg); + + return data; +} + +/* + * Returns true if an usbgecko adapter is found. + */ +static int ug_is_adapter_present(void) +{ + if (!ug_io_base) + return 0; + + return ug_io_transaction(0x90000000) == 0x04700000; +} + +/* + * Returns true if the TX fifo is ready for transmission. + */ +static int ug_is_txfifo_ready(void) +{ + return ug_io_transaction(0xc0000000) & 0x04000000; +} + +/* + * Tries to transmit a character. + * If the TX fifo is not ready the result is undefined. + */ +static void ug_raw_putc(char ch) +{ + ug_io_transaction(0xb0000000 | (ch << 20)); +} + +/* + * Transmits a character. + * It silently fails if the TX fifo is not ready after a number of retries. + */ +static void ug_putc(char ch) +{ + int count = UG_WRITE_ATTEMPTS; + + if (!ug_io_base) + return; + + if (ch == '\n') + ug_putc('\r'); + + while (!ug_is_txfifo_ready() && count--) + barrier(); + if (count) + ug_raw_putc(ch); +} + +/* + * Returns true if the RX fifo is ready for transmission. + */ +static int ug_is_rxfifo_ready(void) +{ + return ug_io_transaction(0xd0000000) & 0x04000000; +} + +/* + * Tries to receive a character. + * If a character is unavailable the function returns -1. + */ +static int ug_raw_getc(void) +{ + u32 data = ug_io_transaction(0xa0000000); + if (data & 0x08000000) + return (data >> 16) & 0xff; + else + return -1; +} + +/* + * Receives a character. + * It fails if the RX fifo is not ready after a number of retries. + */ +static int ug_getc(void) +{ + int count = UG_READ_ATTEMPTS; + + if (!ug_io_base) + return -1; + + while (!ug_is_rxfifo_ready() && count--) + barrier(); + return ug_raw_getc(); +} + +/* + * udbg functions. + * + */ + +/* + * Transmits a character. + */ +void ug_udbg_putc(char ch) +{ + ug_putc(ch); +} + +/* + * Receives a character. Waits until a character is available. + */ +static int ug_udbg_getc(void) +{ + int ch; + + while ((ch = ug_getc()) == -1) + barrier(); + return ch; +} + +/* + * Receives a character. If a character is not available, returns -1. + */ +static int ug_udbg_getc_poll(void) +{ + if (!ug_is_rxfifo_ready()) + return -1; + return ug_getc(); +} + +/* + * Retrieves and prepares the virtual address needed to access the hardware. + */ +static void __iomem *ug_udbg_setup_exi_io_base(struct device_node *np) +{ + void __iomem *exi_io_base = NULL; + phys_addr_t paddr; + const unsigned int *reg; + + reg = of_get_property(np, "reg", NULL); + if (reg) { + paddr = of_translate_address(np, reg); + if (paddr) + exi_io_base = ioremap(paddr, reg[1]); + } + return exi_io_base; +} + +/* + * Checks if a USB Gecko adapter is inserted in any memory card slot. + */ +static void __iomem *ug_udbg_probe(void __iomem *exi_io_base) +{ + int i; + + /* look for a usbgecko on memcard slots A and B */ + for (i = 0; i < 2; i++) { + ug_io_base = exi_io_base + 0x14 * i; + if (ug_is_adapter_present()) + break; + } + if (i == 2) + ug_io_base = NULL; + return ug_io_base; + +} + +/* + * USB Gecko udbg support initialization. + */ +void __init ug_udbg_init(void) +{ + struct device_node *np; + void __iomem *exi_io_base; + + if (ug_io_base) + udbg_printf("%s: early -> final\n", __func__); + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-exi"); + if (!np) { + udbg_printf("%s: EXI node not found\n", __func__); + goto done; + } + + exi_io_base = ug_udbg_setup_exi_io_base(np); + if (!exi_io_base) { + udbg_printf("%s: failed to setup EXI io base\n", __func__); + goto done; + } + + if (!ug_udbg_probe(exi_io_base)) { + udbg_printf("usbgecko_udbg: not found\n"); + iounmap(exi_io_base); + } else { + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + udbg_printf("usbgecko_udbg: ready\n"); + } + +done: + if (np) + of_node_put(np); + return; +} + +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO + +static phys_addr_t __init ug_early_grab_io_addr(void) +{ +#if defined(CONFIG_GAMECUBE) + return 0x0c000000; +#elif defined(CONFIG_WII) + return 0x0d000000; +#else +#error Invalid platform for USB Gecko based early debugging. +#endif +} + +/* + * USB Gecko early debug support initialization for udbg. + */ +void __init udbg_init_usbgecko(void) +{ + void __iomem *early_debug_area; + void __iomem *exi_io_base; + + /* + * At this point we have a BAT already setup that enables I/O + * to the EXI hardware. + * + * The BAT uses a virtual address range reserved at the fixmap. + * This must match the virtual address configured in + * head_32.S:setup_usbgecko_bat(). + */ + early_debug_area = (void __iomem *)__fix_to_virt(FIX_EARLY_DEBUG_BASE); + exi_io_base = early_debug_area + 0x00006800; + + /* try to detect a USB Gecko */ + if (!ug_udbg_probe(exi_io_base)) + return; + + /* we found a USB Gecko, load udbg hooks */ + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + + /* + * Prepare again the same BAT for MMU_init. + * This allows udbg I/O to continue working after the MMU is + * turned on for real. + * It is safe to continue using the same virtual address as it is + * a reserved fixmap area. + */ + setbat(1, (unsigned long)early_debug_area, + ug_early_grab_io_addr(), 128*1024, PAGE_KERNEL_NCG); +} + +#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */ + diff --git a/trunk/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/trunk/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h new file mode 100644 index 000000000000..bb6cde4ad764 --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h @@ -0,0 +1,32 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __USBGECKO_UDBG_H +#define __USBGECKO_UDBG_H + +#ifdef CONFIG_USBGECKO_UDBG + +extern void __init ug_udbg_init(void); + +#else + +static inline void __init ug_udbg_init(void) +{ +} + +#endif /* CONFIG_USBGECKO_UDBG */ + +void __init udbg_init_usbgecko(void); + +#endif /* __USBGECKO_UDBG_H */ diff --git a/trunk/arch/powerpc/platforms/embedded6xx/wii.c b/trunk/arch/powerpc/platforms/embedded6xx/wii.c new file mode 100644 index 000000000000..57e5b608fa1a --- /dev/null +++ b/trunk/arch/powerpc/platforms/embedded6xx/wii.c @@ -0,0 +1,268 @@ +/* + * arch/powerpc/platforms/embedded6xx/wii.c + * + * Nintendo Wii board-specific support + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "wii" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "flipper-pic.h" +#include "hlwd-pic.h" +#include "usbgecko_udbg.h" + +/* control block */ +#define HW_CTRL_COMPATIBLE "nintendo,hollywood-control" + +#define HW_CTRL_RESETS 0x94 +#define HW_CTRL_RESETS_SYS (1<<0) + +/* gpio */ +#define HW_GPIO_COMPATIBLE "nintendo,hollywood-gpio" + +#define HW_GPIO_BASE(idx) (idx * 0x20) +#define HW_GPIO_OUT(idx) (HW_GPIO_BASE(idx) + 0) +#define HW_GPIO_DIR(idx) (HW_GPIO_BASE(idx) + 4) + +#define HW_GPIO_SHUTDOWN (1<<1) +#define HW_GPIO_SLOT_LED (1<<5) +#define HW_GPIO_SENSOR_BAR (1<<8) + + +static void __iomem *hw_ctrl; +static void __iomem *hw_gpio; + +unsigned long wii_hole_start; +unsigned long wii_hole_size; + + +static int __init page_aligned(unsigned long x) +{ + return !(x & (PAGE_SIZE-1)); +} + +void __init wii_memory_fixups(void) +{ + struct lmb_property *p = lmb.memory.region; + + /* + * This is part of a workaround to allow the use of two + * discontiguous RAM ranges on the Wii, even if this is + * currently unsupported on 32-bit PowerPC Linux. + * + * We coealesce the two memory ranges of the Wii into a + * single range, then create a reservation for the "hole" + * between both ranges. + */ + + BUG_ON(lmb.memory.cnt != 2); + BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base)); + + p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE); + p[1].size = _ALIGN_DOWN(p[1].size, PAGE_SIZE); + + wii_hole_start = p[0].base + p[0].size; + wii_hole_size = p[1].base - wii_hole_start; + + pr_info("MEM1: <%08llx %08llx>\n", p[0].base, p[0].size); + pr_info("HOLE: <%08lx %08lx>\n", wii_hole_start, wii_hole_size); + pr_info("MEM2: <%08llx %08llx>\n", p[1].base, p[1].size); + + p[0].size += wii_hole_size + p[1].size; + + lmb.memory.cnt = 1; + lmb_analyze(); + + /* reserve the hole */ + lmb_reserve(wii_hole_start, wii_hole_size); + + /* allow ioremapping the address space in the hole */ + __allow_ioremap_reserved = 1; +} + +unsigned long __init wii_mmu_mapin_mem2(unsigned long top) +{ + unsigned long delta, size, bl; + unsigned long max_size = (256<<20); + + /* MEM2 64MB@0x10000000 */ + delta = wii_hole_start + wii_hole_size; + size = top - delta; + for (bl = 128<<10; bl < max_size; bl <<= 1) { + if (bl * 2 > size) + break; + } + setbat(4, PAGE_OFFSET+delta, delta, bl, PAGE_KERNEL_X); + return delta + bl; +} + +static void wii_spin(void) +{ + local_irq_disable(); + for (;;) + cpu_relax(); +} + +static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible) +{ + void __iomem *hw_regs = NULL; + struct device_node *np; + struct resource res; + int error = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, compatible); + if (!np) { + pr_err("no compatible node found for %s\n", compatible); + goto out; + } + error = of_address_to_resource(np, 0, &res); + if (error) { + pr_err("no valid reg found for %s\n", np->name); + goto out_put; + } + + hw_regs = ioremap(res.start, resource_size(&res)); + if (hw_regs) { + pr_info("%s at 0x%08x mapped to 0x%p\n", name, + res.start, hw_regs); + } + +out_put: + of_node_put(np); +out: + return hw_regs; +} + +static void __init wii_setup_arch(void) +{ + hw_ctrl = wii_ioremap_hw_regs("hw_ctrl", HW_CTRL_COMPATIBLE); + hw_gpio = wii_ioremap_hw_regs("hw_gpio", HW_GPIO_COMPATIBLE); + if (hw_gpio) { + /* turn off the front blue led and IR light */ + clrbits32(hw_gpio + HW_GPIO_OUT(0), + HW_GPIO_SLOT_LED | HW_GPIO_SENSOR_BAR); + } +} + +static void wii_restart(char *cmd) +{ + local_irq_disable(); + + if (hw_ctrl) { + /* clear the system reset pin to cause a reset */ + clrbits32(hw_ctrl + HW_CTRL_RESETS, HW_CTRL_RESETS_SYS); + } + wii_spin(); +} + +static void wii_power_off(void) +{ + local_irq_disable(); + + if (hw_gpio) { + /* make sure that the poweroff GPIO is configured as output */ + setbits32(hw_gpio + HW_GPIO_DIR(1), HW_GPIO_SHUTDOWN); + + /* drive the poweroff GPIO high */ + setbits32(hw_gpio + HW_GPIO_OUT(1), HW_GPIO_SHUTDOWN); + } + wii_spin(); +} + +static void wii_halt(void) +{ + if (ppc_md.restart) + ppc_md.restart(NULL); + wii_spin(); +} + +static void __init wii_init_early(void) +{ + ug_udbg_init(); +} + +static void __init wii_pic_probe(void) +{ + flipper_pic_probe(); + hlwd_pic_probe(); +} + +static int __init wii_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,wii")) + return 0; + + return 1; +} + +static void wii_shutdown(void) +{ + hlwd_quiesce(); + flipper_quiesce(); +} + +#ifdef CONFIG_KEXEC +static int wii_machine_kexec_prepare(struct kimage *image) +{ + return 0; +} +#endif /* CONFIG_KEXEC */ + +define_machine(wii) { + .name = "wii", + .probe = wii_probe, + .init_early = wii_init_early, + .setup_arch = wii_setup_arch, + .restart = wii_restart, + .power_off = wii_power_off, + .halt = wii_halt, + .init_IRQ = wii_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = wii_shutdown, +#ifdef CONFIG_KEXEC + .machine_kexec_prepare = wii_machine_kexec_prepare, +#endif +}; + +static struct of_device_id wii_of_bus[] = { + { .compatible = "nintendo,hollywood", }, + { }, +}; + +static int __init wii_device_probe(void) +{ + if (!machine_is(wii)) + return 0; + + of_platform_bus_probe(NULL, wii_of_bus, NULL); + return 0; +} +device_initcall(wii_device_probe); + diff --git a/trunk/arch/powerpc/platforms/powermac/bootx_init.c b/trunk/arch/powerpc/platforms/powermac/bootx_init.c index cf660916ae0b..9dd789a7370d 100644 --- a/trunk/arch/powerpc/platforms/powermac/bootx_init.c +++ b/trunk/arch/powerpc/platforms/powermac/bootx_init.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/trunk/arch/s390/crypto/aes_s390.c b/trunk/arch/s390/crypto/aes_s390.c index 6118890c946d..6be4503201ac 100644 --- a/trunk/arch/s390/crypto/aes_s390.c +++ b/trunk/arch/s390/crypto/aes_s390.c @@ -174,7 +174,7 @@ static int fallback_init_cip(struct crypto_tfm *tfm) if (IS_ERR(sctx->fallback.cip)) { pr_err("Allocating AES fallback algorithm %s failed\n", name); - return PTR_ERR(sctx->fallback.blk); + return PTR_ERR(sctx->fallback.cip); } return 0; diff --git a/trunk/arch/s390/hypfs/hypfs_diag.c b/trunk/arch/s390/hypfs/hypfs_diag.c index 77df726180ba..2b92d501425f 100644 --- a/trunk/arch/s390/hypfs/hypfs_diag.c +++ b/trunk/arch/s390/hypfs/hypfs_diag.c @@ -164,7 +164,7 @@ static inline void part_hdr__part_name(enum diag204_format type, void *hdr, LPAR_NAME_LEN); EBCASC(name, LPAR_NAME_LEN); name[LPAR_NAME_LEN] = 0; - strstrip(name); + strim(name); } struct cpu_info { @@ -523,7 +523,7 @@ static int diag224_idx2name(int index, char *name) memcpy(name, diag224_cpu_names + ((index + 1) * CPU_NAME_LEN), CPU_NAME_LEN); name[CPU_NAME_LEN] = 0; - strstrip(name); + strim(name); return 0; } diff --git a/trunk/arch/s390/hypfs/hypfs_vm.c b/trunk/arch/s390/hypfs/hypfs_vm.c index d01fc8f799f0..f0b0d31f0b48 100644 --- a/trunk/arch/s390/hypfs/hypfs_vm.c +++ b/trunk/arch/s390/hypfs/hypfs_vm.c @@ -124,7 +124,7 @@ static int hpyfs_vm_create_guest(struct super_block *sb, /* guest dir */ memcpy(guest_name, data->guest_name, NAME_LEN); EBCASC(guest_name, NAME_LEN); - strstrip(guest_name); + strim(guest_name); guest_dir = hypfs_mkdir(sb, systems_dir, guest_name); if (IS_ERR(guest_dir)) return PTR_ERR(guest_dir); diff --git a/trunk/arch/s390/include/asm/asm-offsets.h b/trunk/arch/s390/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/s390/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/s390/include/asm/elf.h b/trunk/arch/s390/include/asm/elf.h index e885442c1dfe..354d42616c7e 100644 --- a/trunk/arch/s390/include/asm/elf.h +++ b/trunk/arch/s390/include/asm/elf.h @@ -155,7 +155,6 @@ extern unsigned int vdso_enabled; } while (0) #define CORE_DUMP_USE_REGSET -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/trunk/arch/s390/include/asm/unistd.h b/trunk/arch/s390/include/asm/unistd.h index cb5232df151e..192a7203a14f 100644 --- a/trunk/arch/s390/include/asm/unistd.h +++ b/trunk/arch/s390/include/asm/unistd.h @@ -269,7 +269,8 @@ #define __NR_pwritev 329 #define __NR_rt_tgsigqueueinfo 330 #define __NR_perf_event_open 331 -#define NR_syscalls 332 +#define __NR_recvmmsg 332 +#define NR_syscalls 333 /* * There are some system calls that are not present on 64 bit, some diff --git a/trunk/arch/s390/kernel/compat_wrapper.S b/trunk/arch/s390/kernel/compat_wrapper.S index 30de2d0e52bb..faeaccc7d7d9 100644 --- a/trunk/arch/s390/kernel/compat_wrapper.S +++ b/trunk/arch/s390/kernel/compat_wrapper.S @@ -1853,3 +1853,12 @@ sys32_execve_wrapper: llgtr %r3,%r3 # compat_uptr_t * llgtr %r4,%r4 # compat_uptr_t * jg sys32_execve # branch to system call + + .globl compat_sys_recvmmsg_wrapper +compat_sys_recvmmsg_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # struct compat_mmsghdr * + llgfr %r4,%r4 # unsigned int + llgfr %r5,%r5 # unsigned int + llgtr %r6,%r6 # struct compat_timespec * + jg compat_sys_recvmmsg diff --git a/trunk/arch/s390/kernel/ipl.c b/trunk/arch/s390/kernel/ipl.c index 4890ac6d7faa..4d73296fed74 100644 --- a/trunk/arch/s390/kernel/ipl.c +++ b/trunk/arch/s390/kernel/ipl.c @@ -221,7 +221,7 @@ static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj, \ const char *buf, size_t len) \ { \ strncpy(_value, buf, sizeof(_value) - 1); \ - strstrip(_value); \ + strim(_value); \ return len; \ } \ static struct kobj_attribute sys_##_prefix##_##_name##_attr = \ @@ -472,7 +472,7 @@ static ssize_t ipl_ccw_loadparm_show(struct kobject *kobj, return sprintf(page, "#unknown#\n"); memcpy(loadparm, &sclp_ipl_info.loadparm, LOADPARM_LEN); EBCASC(loadparm, LOADPARM_LEN); - strstrip(loadparm); + strim(loadparm); return sprintf(page, "%s\n", loadparm); } @@ -776,7 +776,7 @@ static void reipl_get_ascii_loadparm(char *loadparm, memcpy(loadparm, ibp->ipl_info.ccw.load_parm, LOADPARM_LEN); EBCASC(loadparm, LOADPARM_LEN); loadparm[LOADPARM_LEN] = 0; - strstrip(loadparm); + strim(loadparm); } static ssize_t reipl_generic_loadparm_show(struct ipl_parameter_block *ipb, diff --git a/trunk/arch/s390/kernel/ptrace.c b/trunk/arch/s390/kernel/ptrace.c index 653c6a178740..13815d39f7dd 100644 --- a/trunk/arch/s390/kernel/ptrace.c +++ b/trunk/arch/s390/kernel/ptrace.c @@ -959,7 +959,7 @@ static const struct user_regset s390_compat_regsets[] = { .set = s390_fpregs_set, }, [REGSET_GENERAL_EXTENDED] = { - .core_note_type = NT_PRXSTATUS, + .core_note_type = NT_S390_HIGH_GPRS, .n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t), .size = sizeof(compat_long_t), .align = sizeof(compat_long_t), diff --git a/trunk/arch/s390/kernel/syscalls.S b/trunk/arch/s390/kernel/syscalls.S index 30eca070d426..4f292c936872 100644 --- a/trunk/arch/s390/kernel/syscalls.S +++ b/trunk/arch/s390/kernel/syscalls.S @@ -340,3 +340,4 @@ SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper) SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper) SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */ SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper) +SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper) diff --git a/trunk/arch/s390/kernel/traps.c b/trunk/arch/s390/kernel/traps.c index c2e42cc65ce7..6e7ad63854c0 100644 --- a/trunk/arch/s390/kernel/traps.c +++ b/trunk/arch/s390/kernel/traps.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include @@ -382,7 +382,7 @@ void __kprobes do_single_step(struct pt_regs *regs) SIGTRAP) == NOTIFY_STOP){ return; } - if ((current->ptrace & PT_PTRACED) != 0) + if (tracehook_consider_fatal_signal(current, SIGTRAP)) force_sig(SIGTRAP, current); } @@ -483,7 +483,7 @@ static void illegal_op(struct pt_regs * regs, long interruption_code) if (get_user(*((__u16 *) opcode), (__u16 __user *) location)) return; if (*((__u16 *) opcode) == S390_BREAKPOINT_U16) { - if (current->ptrace & PT_PTRACED) + if (tracehook_consider_fatal_signal(current, SIGTRAP)) force_sig(SIGTRAP, current); else signal = SIGILL; diff --git a/trunk/arch/score/include/asm/asm-offsets.h b/trunk/arch/score/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/trunk/arch/score/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include diff --git a/trunk/arch/score/include/asm/cacheflush.h b/trunk/arch/score/include/asm/cacheflush.h index caaba24036e3..1d545d0ce206 100644 --- a/trunk/arch/score/include/asm/cacheflush.h +++ b/trunk/arch/score/include/asm/cacheflush.h @@ -14,10 +14,12 @@ extern void flush_cache_sigtramp(unsigned long addr); extern void flush_icache_all(void); extern void flush_icache_range(unsigned long start, unsigned long end); extern void flush_dcache_range(unsigned long start, unsigned long end); +extern void flush_dcache_page(struct page *page); + +#define PG_dcache_dirty PG_arch_1 #define flush_cache_dup_mm(mm) do {} while (0) #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do {} while (0) #define flush_dcache_mmap_lock(mapping) do {} while (0) #define flush_dcache_mmap_unlock(mapping) do {} while (0) #define flush_cache_vmap(start, end) do {} while (0) diff --git a/trunk/arch/score/include/asm/delay.h b/trunk/arch/score/include/asm/delay.h index 6726ec199dc0..529e494712a5 100644 --- a/trunk/arch/score/include/asm/delay.h +++ b/trunk/arch/score/include/asm/delay.h @@ -1,6 +1,8 @@ #ifndef _ASM_SCORE_DELAY_H #define _ASM_SCORE_DELAY_H +#include + static inline void __delay(unsigned long loops) { /* 3 cycles per loop. */ diff --git a/trunk/arch/score/include/asm/elf.h b/trunk/arch/score/include/asm/elf.h index 43526d9fda93..f478ce94181f 100644 --- a/trunk/arch/score/include/asm/elf.h +++ b/trunk/arch/score/include/asm/elf.h @@ -61,7 +61,6 @@ struct task_struct; struct pt_regs; #define CORE_DUMP_USE_REGSET -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE PAGE_SIZE /* This yields a mask that user programs can use to figure out what diff --git a/trunk/arch/score/include/asm/page.h b/trunk/arch/score/include/asm/page.h index d92a5a2d36d4..1e9ade8e77e6 100644 --- a/trunk/arch/score/include/asm/page.h +++ b/trunk/arch/score/include/asm/page.h @@ -74,7 +74,7 @@ extern unsigned long max_pfn; #define page_to_bus(page) (page_to_phys(page)) #define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr))) -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_mapnr) +#define pfn_valid(pfn) (((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn)) #define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) diff --git a/trunk/arch/score/kernel/setup.c b/trunk/arch/score/kernel/setup.c index 6a2503c75c4e..6f898c057878 100644 --- a/trunk/arch/score/kernel/setup.c +++ b/trunk/arch/score/kernel/setup.c @@ -49,6 +49,7 @@ static void __init bootmem_init(void) min_low_pfn = PFN_UP(MEMORY_START); max_low_pfn = PFN_UP(MEMORY_START + MEMORY_SIZE); + max_mapnr = max_low_pfn - min_low_pfn; /* Initialize the boot-time allocator with low memory only. */ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, diff --git a/trunk/arch/score/mm/cache.c b/trunk/arch/score/mm/cache.c index dbac9d9dfddd..b25e95743600 100644 --- a/trunk/arch/score/mm/cache.c +++ b/trunk/arch/score/mm/cache.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -51,6 +52,27 @@ static void flush_data_cache_page(unsigned long addr) } } +void flush_dcache_page(struct page *page) +{ + struct address_space *mapping = page_mapping(page); + unsigned long addr; + + if (PageHighMem(page)) + return; + if (mapping && !mapping_mapped(mapping)) { + set_bit(PG_dcache_dirty, &(page)->flags); + return; + } + + /* + * We could delay the flush for the !page_mapping case too. But that + * case is for exec env/arg pages and those are %99 certainly going to + * get faulted into the tlb (and thus flushed) anyways. + */ + addr = (unsigned long) page_address(page); + flush_data_cache_page(addr); +} + /* called by update_mmu_cache. */ void __update_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) @@ -63,11 +85,11 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address, if (unlikely(!pfn_valid(pfn))) return; page = pfn_to_page(pfn); - if (page_mapping(page) && test_bit(PG_arch_1, &page->flags)) { + if (page_mapping(page) && test_bit(PG_dcache_dirty, &(page)->flags)) { addr = (unsigned long) page_address(page); if (exec) flush_data_cache_page(addr); - clear_bit(PG_arch_1, &page->flags); + clear_bit(PG_dcache_dirty, &(page)->flags); } } diff --git a/trunk/arch/score/mm/init.c b/trunk/arch/score/mm/init.c index 4e3dcd0c4716..8c15b2c85d5a 100644 --- a/trunk/arch/score/mm/init.c +++ b/trunk/arch/score/mm/init.c @@ -83,7 +83,6 @@ void __init mem_init(void) unsigned long codesize, reservedpages, datasize, initsize; unsigned long tmp, ram = 0; - max_mapnr = max_low_pfn; high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); totalram_pages += free_all_bootmem(); totalram_pages -= setup_zero_page(); /* Setup zeroed pages. */ @@ -101,10 +100,6 @@ void __init mem_init(void) datasize = (unsigned long) &_edata - (unsigned long) &_etext; initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT); - kclist_add(&kcore_vmalloc, (void *) VMALLOC_START, - VMALLOC_END - VMALLOC_START); - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), diff --git a/trunk/arch/sh/Kconfig.debug b/trunk/arch/sh/Kconfig.debug index 55907af1dc25..12fec72fec5f 100644 --- a/trunk/arch/sh/Kconfig.debug +++ b/trunk/arch/sh/Kconfig.debug @@ -19,50 +19,6 @@ config SH_STANDARD_BIOS mask ROM and no flash (WindowsCE machines fall in this category). If unsure, say N. -config EARLY_SCIF_CONSOLE - bool "Use early SCIF console" - help - This enables an early console using a fixed SCIF port. This can - be used by platforms that are either not running the SH - standard BIOS, or do not wish to use the BIOS callbacks for the - serial I/O. - -config EARLY_SCIF_CONSOLE_PORT - hex - depends on EARLY_SCIF_CONSOLE - default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 - default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 - default "0xf8420000" if CPU_SUBTYPE_SH7619 - default "0xff804000" if CPU_SUBTYPE_MXG - default "0xffc30000" if CPU_SUBTYPE_SHX3 - default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ - CPU_SUBTYPE_SH7343 - default "0xfe4c0000" if CPU_SUBTYPE_SH7757 - default "0xffeb0000" if CPU_SUBTYPE_SH7785 - default "0xffeb0000" if CPU_SUBTYPE_SH7786 - default "0xfffe8000" if CPU_SUBTYPE_SH7203 - default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 - default "0xffe80000" if CPU_SH4 - default "0xa4000150" if CPU_SH3 - default "0x00000000" - -config EARLY_PRINTK - bool "Early printk support" - depends on SH_STANDARD_BIOS || EARLY_SCIF_CONSOLE - help - Say Y here to redirect kernel printk messages to the serial port - used by the SH-IPL bootloader, starting very early in the boot - process and ending when the kernel's serial console is initialised. - This option is only useful porting the kernel to a new machine, - when the kernel may crash or hang before the serial console is - initialised. If unsure, say N. - - On devices that are running SH-IPL and want to keep the port - initialization consistent while not using the BIOS callbacks, - select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using - the kernel command line option to toggle back and forth. - config STACK_DEBUG bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 diff --git a/trunk/arch/sh/Makefile b/trunk/arch/sh/Makefile index ac17c5ac550e..db91925c79d1 100644 --- a/trunk/arch/sh/Makefile +++ b/trunk/arch/sh/Makefile @@ -205,10 +205,7 @@ libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \ zImage vmlinux.srec romImage -PHONY += maketools $(BOOT_TARGETS) FORCE - -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h +PHONY += $(BOOT_TARGETS) all: $(KBUILD_IMAGE) @@ -217,7 +214,8 @@ $(BOOT_TARGETS): vmlinux compressed: zImage -archprepare: maketools +archprepare: + $(Q)$(MAKE) $(build)=arch/sh/tools include/generated/machtypes.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -234,5 +232,3 @@ define archhelp @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' endef - -CLEAN_FILES += include/asm-sh/machtypes.h diff --git a/trunk/arch/sh/boards/mach-ap325rxa/setup.c b/trunk/arch/sh/boards/mach-ap325rxa/setup.c index cf9dc12dfeb1..1f5fa5c44f6d 100644 --- a/trunk/arch/sh/boards/mach-ap325rxa/setup.c +++ b/trunk/arch/sh/boards/mach-ap325rxa/setup.c @@ -316,20 +316,24 @@ static struct soc_camera_platform_info camera_info = { .format_name = "UYVY", .format_depth = 16, .format = { - .pixelformat = V4L2_PIX_FMT_UYVY, + .code = V4L2_MBUS_FMT_YUYV8_2X8_BE, .colorspace = V4L2_COLORSPACE_SMPTE170M, + .field = V4L2_FIELD_NONE, .width = 640, .height = 480, }, .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | - SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 | + SOCAM_DATA_ACTIVE_HIGH, .set_capture = camera_set_capture, - .link = { - .bus_id = 0, - .add_device = ap325rxa_camera_add, - .del_device = ap325rxa_camera_del, - .module_name = "soc_camera_platform", - }, +}; + +struct soc_camera_link camera_link = { + .bus_id = 0, + .add_device = ap325rxa_camera_add, + .del_device = ap325rxa_camera_del, + .module_name = "soc_camera_platform", + .priv = &camera_info, }; static void dummy_release(struct device *dev) @@ -347,7 +351,7 @@ static struct platform_device camera_device = { static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev) { - if (icl != &camera_info.link || camera_probe() <= 0) + if (icl != &camera_link || camera_probe() <= 0) return -ENODEV; camera_info.dev = dev; @@ -357,7 +361,7 @@ static int ap325rxa_camera_add(struct soc_camera_link *icl, static void ap325rxa_camera_del(struct soc_camera_link *icl) { - if (icl != &camera_info.link) + if (icl != &camera_link) return; platform_device_unregister(&camera_device); @@ -470,13 +474,15 @@ static struct ov772x_camera_info ov7725_info = { .buswidth = SOCAM_DATAWIDTH_8, .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0), - .link = { - .bus_id = 0, - .power = ov7725_power, - .board_info = &ap325rxa_i2c_camera[0], - .i2c_adapter_id = 0, - .module_name = "ov772x", - }, +}; + +static struct soc_camera_link ov7725_link = { + .bus_id = 0, + .power = ov7725_power, + .board_info = &ap325rxa_i2c_camera[0], + .i2c_adapter_id = 0, + .module_name = "ov772x", + .priv = &ov7725_info, }; static struct platform_device ap325rxa_camera[] = { @@ -484,13 +490,13 @@ static struct platform_device ap325rxa_camera[] = { .name = "soc-camera-pdrv", .id = 0, .dev = { - .platform_data = &ov7725_info.link, + .platform_data = &ov7725_link, }, }, { .name = "soc-camera-pdrv", .id = 1, .dev = { - .platform_data = &camera_info.link, + .platform_data = &camera_link, }, }, }; diff --git a/trunk/arch/sh/boards/mach-ecovec24/setup.c b/trunk/arch/sh/boards/mach-ecovec24/setup.c index 826e62326d51..194aaca22d47 100644 --- a/trunk/arch/sh/boards/mach-ecovec24/setup.c +++ b/trunk/arch/sh/boards/mach-ecovec24/setup.c @@ -19,11 +19,18 @@ #include #include #include +#include +#include +#include +#include #include #include #include #include