diff --git a/[refs] b/[refs]
index 254602496e59..16f5e68226a8 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
---
-refs/heads/master: 9eb59573d4b86f347e6cd04f47a4c2082009fa58
+refs/heads/master: 4d5709a7b7d54fc5882d2943a14988a92d48c00a
diff --git a/trunk/CREDITS b/trunk/CREDITS
index 832436e1dd91..550bb2b9fe8b 100644
--- a/trunk/CREDITS
+++ b/trunk/CREDITS
@@ -665,6 +665,11 @@ D: Minor updates to SCSI types, added /proc/pid/maps protection
S: (ask for current address)
S: USA
+N: Robin Cornelius
+E: robincornelius@users.sourceforge.net
+D: Ralink rt2x00 WLAN driver
+S: Cornwall, U.K.
+
N: Mark Corner
E: mcorner@umich.edu
W: http://www.eecs.umich.edu/~mcorner/
@@ -679,6 +684,11 @@ D: Kernel module SMART utilities
S: Santa Cruz, California
S: USA
+N: Luis Correia
+E: lfcorreia@users.sf.net
+D: Ralink rt2x00 WLAN driver
+S: Belas, Portugal
+
N: Alan Cox
W: http://www.linux.org.uk/diary/
D: Linux Networking (0.99.10->2.0.29)
@@ -833,6 +843,12 @@ S: Lancs
S: PR4 6AX
S: United Kingdom
+N: Ivo van Doorn
+E: IvDoorn@gmail.com
+W: http://www.mendiosus.nl
+D: Ralink rt2x00 WLAN driver
+S: Haarlem, The Netherlands
+
N: John G Dorsey
E: john+@cs.cmu.edu
D: ARM Linux ports to Assabet/Neponset, Spot
@@ -3517,6 +3533,12 @@ S: Maastrichterweg 63
S: 5554 GG Valkenswaard
S: The Netherlands
+N: Mark Wallis
+E: mwallis@serialmonkey.com
+W: http://mark.serialmonkey.com
+D: Ralink rt2x00 WLAN driver
+S: Newcastle, Australia
+
N: Peter Shaobo Wang
E: pwang@mmdcorp.com
W: http://www.mmdcorp.com/pw/linux
@@ -3651,6 +3673,15 @@ S: Alte Regensburger Str. 11a
S: 93149 Nittenau
S: Germany
+N: Gertjan van Wingerde
+E: gwingerde@home.nl
+D: Ralink rt2x00 WLAN driver
+D: Minix V2 file-system
+D: Misc fixes
+S: Geessinkweg 177
+S: 7544 TX Enschede
+S: The Netherlands
+
N: Lars Wirzenius
E: liw@iki.fi
D: Linux System Administrator's Guide, author, former maintainer
diff --git a/trunk/Documentation/DocBook/Makefile b/trunk/Documentation/DocBook/Makefile
index 08687e45e19d..1a7f53068ec2 100644
--- a/trunk/Documentation/DocBook/Makefile
+++ b/trunk/Documentation/DocBook/Makefile
@@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
procfs-guide.xml writing_usb_driver.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
- genericirq.xml
+ genericirq.xml s390-drivers.xml
###
# The build process is as follows (targets):
diff --git a/trunk/Documentation/DocBook/kernel-api.tmpl b/trunk/Documentation/DocBook/kernel-api.tmpl
index b886f52a9aac..e5da4f2b7c22 100644
--- a/trunk/Documentation/DocBook/kernel-api.tmpl
+++ b/trunk/Documentation/DocBook/kernel-api.tmpl
@@ -240,17 +240,23 @@ X!Ilib/string.c
Driver Support
!Enet/core/dev.c
!Enet/ethernet/eth.c
+!Enet/sched/sch_generic.c
!Iinclude/linux/etherdevice.h
+!Iinclude/linux/netdevice.h
+
+ PHY Support
!Edrivers/net/phy/phy.c
!Idrivers/net/phy/phy.c
!Edrivers/net/phy/phy_device.c
!Idrivers/net/phy/phy_device.c
!Edrivers/net/phy/mdio_bus.c
!Idrivers/net/phy/mdio_bus.c
+
+-->
Synchronous PPP
!Edrivers/net/wan/syncppp.c
diff --git a/trunk/Documentation/DocBook/s390-drivers.tmpl b/trunk/Documentation/DocBook/s390-drivers.tmpl
new file mode 100644
index 000000000000..254e769282a4
--- /dev/null
+++ b/trunk/Documentation/DocBook/s390-drivers.tmpl
@@ -0,0 +1,149 @@
+
+
+
+
+
+ Writing s390 channel device drivers
+
+
+
+ Cornelia
+ Huck
+
+
+ cornelia.huck@de.ibm.com
+
+
+
+
+
+
+ 2007
+ IBM Corp.
+
+
+
+
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+
+
+
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+
+
+
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+
+
+
+ For more details see the file COPYING in the source
+ distribution of Linux.
+
+
+
+
+
+
+
+ Introduction
+
+ This document describes the interfaces available for device drivers that
+ drive s390 based channel attached devices. This includes interfaces for
+ interaction with the hardware and interfaces for interacting with the
+ common driver core. Those interfaces are provided by the s390 common I/O
+ layer.
+
+
+ The document assumes a familarity with the technical terms associated
+ with the s390 channel I/O architecture. For a description of this
+ architecture, please refer to the "z/Architecture: Principles of
+ Operation", IBM publication no. SA22-7832.
+
+
+ While most I/O devices on a s390 system are typically driven through the
+ channel I/O mechanism described here, there are various other methods
+ (like the diag interface). These are out of the scope of this document.
+
+
+ Some additional information can also be found in the kernel source
+ under Documentation/s390/driver-model.txt.
+
+
+
+ The ccw bus
+
+ The ccw bus typically contains the majority of devices available to
+ a s390 system. Named after the channel command word (ccw), the basic
+ command structure used to address its devices, the ccw bus contains
+ so-called channel attached devices. They are addressed via subchannels,
+ visible on the css bus. A device driver, however, will never interact
+ with the subchannel directly, but only via the device on the ccw bus,
+ the ccw device.
+
+
+ I/O functions for channel-attached devices
+
+ Some hardware structures have been translated into C structures for use
+ by the common I/O layer and device drivers. For more information on
+ the hardware structures represented here, please consult the Principles
+ of Operation.
+
+!Iinclude/asm-s390/cio.h
+
+
+ ccw devices
+
+ Devices that want to initiate channel I/O need to attach to the ccw bus.
+ Interaction with the driver core is done via the common I/O layer, which
+ provides the abstractions of ccw devices and ccw device drivers.
+
+
+ The functions that initiate or terminate channel I/O all act upon a
+ ccw device structure. Device drivers must not bypass those functions
+ or strange side effects may happen.
+
+!Iinclude/asm-s390/ccwdev.h
+!Edrivers/s390/cio/device.c
+!Edrivers/s390/cio/device_ops.c
+
+
+ The channel-measurement facility
+
+ The channel-measurement facility provides a means to collect
+ measurement data which is made available by the channel subsystem
+ for each channel attached device.
+
+!Iinclude/asm-s390/cmb.h
+!Edrivers/s390/cio/cmf.c
+
+
+
+
+ The ccwgroup bus
+
+ The ccwgroup bus only contains artificial devices, created by the user.
+ Many networking devices (e.g. qeth) are in fact composed of several
+ ccw devices (like read, write and data channel for qeth). The
+ ccwgroup bus provides a mechanism to create a meta-device which
+ contains those ccw devices as slave devices and can be associated
+ with the netdevice.
+
+
+ ccw group devices
+!Iinclude/asm-s390/ccwgroup.h
+!Edrivers/s390/cio/ccwgroup.c
+
+
+
+
diff --git a/trunk/Documentation/block/biodoc.txt b/trunk/Documentation/block/biodoc.txt
index 8af392fc6ef0..dc3f49e3e539 100644
--- a/trunk/Documentation/block/biodoc.txt
+++ b/trunk/Documentation/block/biodoc.txt
@@ -477,9 +477,9 @@ With this multipage bio design:
the same bi_io_vec array, but with the index and size accordingly modified)
- A linked list of bios is used as before for unrelated merges (*) - this
avoids reallocs and makes independent completions easier to handle.
-- Code that traverses the req list needs to make a distinction between
- segments of a request (bio_for_each_segment) and the distinct completion
- units/bios (rq_for_each_bio).
+- Code that traverses the req list can find all the segments of a bio
+ by using rq_for_each_segment. This handles the fact that a request
+ has multiple bios, each of which can have multiple segments.
- Drivers which can't process a large bio in one shot can use the bi_idx
field to keep track of the next bio_vec entry to process.
(e.g a 1MB bio_vec needs to be handled in max 128kB chunks for IDE)
@@ -664,14 +664,14 @@ in lvm or md.
3.2.1 Traversing segments and completion units in a request
-The macros bio_for_each_segment() and rq_for_each_bio() should be used for
-traversing the bios in the request list (drivers should avoid directly
-trying to do it themselves). Using these helpers should also make it easier
-to cope with block changes in the future.
+The macro rq_for_each_segment() should be used for traversing the bios
+in the request list (drivers should avoid directly trying to do it
+themselves). Using these helpers should also make it easier to cope
+with block changes in the future.
- rq_for_each_bio(bio, rq)
- bio_for_each_segment(bio_vec, bio, i)
- /* bio_vec is now current segment */
+ struct req_iterator iter;
+ rq_for_each_segment(bio_vec, rq, iter)
+ /* bio_vec is now current segment */
I/O completion callbacks are per-bio rather than per-segment, so drivers
that traverse bio chains on completion need to keep that in mind. Drivers
diff --git a/trunk/Documentation/block/ioprio.txt b/trunk/Documentation/block/ioprio.txt
index 1b930ef5a079..35e516b0b8a9 100644
--- a/trunk/Documentation/block/ioprio.txt
+++ b/trunk/Documentation/block/ioprio.txt
@@ -86,8 +86,15 @@ extern int sys_ioprio_get(int, int);
#error "Unsupported arch"
#endif
-_syscall3(int, ioprio_set, int, which, int, who, int, ioprio);
-_syscall2(int, ioprio_get, int, which, int, who);
+static inline int ioprio_set(int which, int who, int ioprio)
+{
+ return syscall(__NR_ioprio_set, which, who, ioprio);
+}
+
+static inline int ioprio_get(int which, int who)
+{
+ return syscall(__NR_ioprio_get, which, who);
+}
enum {
IOPRIO_CLASS_NONE,
diff --git a/trunk/Documentation/dvb/faq.txt b/trunk/Documentation/dvb/faq.txt
index dbcedf5833ee..2511a335abd6 100644
--- a/trunk/Documentation/dvb/faq.txt
+++ b/trunk/Documentation/dvb/faq.txt
@@ -150,7 +150,7 @@ Some very frequently asked questions about linuxtv-dvb
- saa7146_vv: SAA7146 video and vbi functions. These are only needed
for full-featured cards.
- - video-buf: capture helper module for the saa7146_vv driver. This
+ - videobuf-dma-sg: capture helper module for the saa7146_vv driver. This
one is responsible to handle capture buffers.
- dvb-ttpci: The main driver for AV7110 based, full-featured
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
index 00928d2ecfb2..63df2262d41a 100644
--- a/trunk/Documentation/feature-removal-schedule.txt
+++ b/trunk/Documentation/feature-removal-schedule.txt
@@ -306,3 +306,24 @@ Why: In kernel tree version of driver is unmaintained. Sk98lin driver
Who: Stephen Hemminger
---------------------------
+
+What: i386/x86_64 bzImage symlinks
+When: April 2008
+
+Why: The i386/x86_64 merge provides a symlink to the old bzImage
+ location so not yet updated user space tools, e.g. package
+ scripts, do not break.
+Who: Thomas Gleixner
+
+---------------------------
+
+What: shaper network driver
+When: January 2008
+Files: drivers/net/shaper.c, include/linux/if_shaper.h
+Why: This driver has been marked obsolete for many years.
+ It was only designed to work on lower speed links and has design
+ flaws that lead to machine crashes. The qdisc infrastructure in
+ 2.4 or later kernels, provides richer features and is more robust.
+Who: Stephen Hemminger
+
+---------------------------
diff --git a/trunk/Documentation/filesystems/ntfs.txt b/trunk/Documentation/filesystems/ntfs.txt
index 8ee10ec88293..e79ee2db183a 100644
--- a/trunk/Documentation/filesystems/ntfs.txt
+++ b/trunk/Documentation/filesystems/ntfs.txt
@@ -407,7 +407,7 @@ raiddev /dev/md0
device /dev/hda5
raid-disk 0
device /dev/hdb1
- raid-disl 1
+ raid-disk 1
For linear raid, just change the raid-level above to "raid-level linear", for
mirrors, change it to "raid-level 1", and for stripe sets with parity, change
@@ -457,6 +457,8 @@ ChangeLog
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
+2.1.29:
+ - Fix a deadlock when mounting read-write.
2.1.28:
- Fix a deadlock.
2.1.27:
diff --git a/trunk/Documentation/infiniband/user_mad.txt b/trunk/Documentation/infiniband/user_mad.txt
index 8ec54b974b67..744687dd195b 100644
--- a/trunk/Documentation/infiniband/user_mad.txt
+++ b/trunk/Documentation/infiniband/user_mad.txt
@@ -99,6 +99,20 @@ Transaction IDs
request/response pairs. The upper 32 bits are reserved for use by
the kernel and will be overwritten before a MAD is sent.
+P_Key Index Handling
+
+ The old ib_umad interface did not allow setting the P_Key index for
+ MADs that are sent and did not provide a way for obtaining the P_Key
+ index of received MADs. A new layout for struct ib_user_mad_hdr
+ with a pkey_index member has been defined; however, to preserve
+ binary compatibility with older applications, this new layout will
+ not be used unless the IB_USER_MAD_ENABLE_PKEY ioctl is called
+ before a file descriptor is used for anything else.
+
+ In September 2008, the IB_USER_MAD_ABI_VERSION will be incremented
+ to 6, the new layout of struct ib_user_mad_hdr will be used by
+ default, and the IB_USER_MAD_ENABLE_PKEY ioctl will be removed.
+
Setting IsSM Capability Bit
To set the IsSM capability bit for a port, simply open the
diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
index 4d175c751246..f27cdd7125f2 100644
--- a/trunk/Documentation/kernel-parameters.txt
+++ b/trunk/Documentation/kernel-parameters.txt
@@ -35,6 +35,7 @@ parameter is applicable:
APIC APIC support is enabled.
APM Advanced Power Management support is enabled.
AX25 Appropriate AX.25 support is enabled.
+ BLACKFIN Blackfin architecture is enabled.
DRM Direct Rendering Management support is enabled.
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
@@ -550,7 +551,7 @@ and is between 256 and 4096 characters. It is defined in the file
dtc3181e= [HW,SCSI]
- earlyprintk= [X86-32,X86-64,SH]
+ earlyprintk= [X86-32,X86-64,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
@@ -1008,6 +1009,10 @@ and is between 256 and 4096 characters. It is defined in the file
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
+ mfgpt_irq= [IA-32] Specify the IRQ to use for the
+ Multi-Function General Purpose Timers on AMD Geode
+ platforms.
+
mga= [HW,DRM]
mousedev.tap_time=
@@ -1159,6 +1164,9 @@ and is between 256 and 4096 characters. It is defined in the file
nomce [X86-32] Machine Check Exception
+ nomfgpt [X86-32] Disable Multi-Function General Purpose
+ Timer usage (for AMD Geode machines).
+
noreplace-paravirt [X86-32,PV_OPS] Don't patch paravirt_ops
noreplace-smp [X86-32,SMP] Don't replace SMP instructions
diff --git a/trunk/Documentation/lguest/lguest.c b/trunk/Documentation/lguest/lguest.c
index 73c5f1f3d5d2..103e346c8b6a 100644
--- a/trunk/Documentation/lguest/lguest.c
+++ b/trunk/Documentation/lguest/lguest.c
@@ -46,7 +46,7 @@ typedef uint32_t u32;
typedef uint16_t u16;
typedef uint8_t u8;
#include "../../include/linux/lguest_launcher.h"
-#include "../../include/asm-i386/e820.h"
+#include "../../include/asm-x86/e820_32.h"
/*:*/
#define PAGE_PRESENT 0x7 /* Present, RW, Execute */
diff --git a/trunk/Documentation/lockstat.txt b/trunk/Documentation/lockstat.txt
new file mode 100644
index 000000000000..4ba4664ce5c3
--- /dev/null
+++ b/trunk/Documentation/lockstat.txt
@@ -0,0 +1,120 @@
+
+LOCK STATISTICS
+
+- WHAT
+
+As the name suggests, it provides statistics on locks.
+
+- WHY
+
+Because things like lock contention can severely impact performance.
+
+- HOW
+
+Lockdep already has hooks in the lock functions and maps lock instances to
+lock classes. We build on that. The graph below shows the relation between
+the lock functions and the various hooks therein.
+
+ __acquire
+ |
+ lock _____
+ | \
+ | __contended
+ | |
+ |
+ | _______/
+ |/
+ |
+ __acquired
+ |
+ .
+
+ .
+ |
+ __release
+ |
+ unlock
+
+lock, unlock - the regular lock functions
+__* - the hooks
+<> - states
+
+With these hooks we provide the following statistics:
+
+ con-bounces - number of lock contention that involved x-cpu data
+ contentions - number of lock acquisitions that had to wait
+ wait time min - shortest (non-0) time we ever had to wait for a lock
+ max - longest time we ever had to wait for a lock
+ total - total time we spend waiting on this lock
+ acq-bounces - number of lock acquisitions that involved x-cpu data
+ acquisitions - number of times we took the lock
+ hold time min - shortest (non-0) time we ever held the lock
+ max - longest time we ever held the lock
+ total - total time this lock was held
+
+From these number various other statistics can be derived, such as:
+
+ hold time average = hold time total / acquisitions
+
+These numbers are gathered per lock class, per read/write state (when
+applicable).
+
+It also tracks 4 contention points per class. A contention point is a call site
+that had to wait on lock acquisition.
+
+ - USAGE
+
+Look at the current lock statistics:
+
+( line numbers not part of actual output, done for clarity in the explanation
+ below )
+
+# less /proc/lock_stat
+
+01 lock_stat version 0.2
+02 -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+03 class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total
+04 -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+05
+06 &inode->i_data.tree_lock-W: 15 21657 0.18 1093295.30 11547131054.85 58 10415 0.16 87.51 6387.60
+07 &inode->i_data.tree_lock-R: 0 0 0.00 0.00 0.00 23302 231198 0.25 8.45 98023.38
+08 --------------------------
+09 &inode->i_data.tree_lock 0 [] add_to_page_cache+0x5f/0x190
+10
+11 ...............................................................................................................................................................................................
+12
+13 dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24
+14 -----------
+15 dcache_lock 180 [] sys_getcwd+0x11e/0x230
+16 dcache_lock 165 [] d_alloc+0x15a/0x210
+17 dcache_lock 33 [] _atomic_dec_and_lock+0x4d/0x70
+18 dcache_lock 1 [] shrink_dcache_parent+0x18/0x130
+
+This excerpt shows the first two lock class statistics. Line 01 shows the
+output version - each time the format changes this will be updated. Line 02-04
+show the header with column descriptions. Lines 05-10 and 13-18 show the actual
+statistics. These statistics come in two parts; the actual stats separated by a
+short separator (line 08, 14) from the contention points.
+
+The first lock (05-10) is a read/write lock, and shows two lines above the
+short separator. The contention points don't match the column descriptors,
+they have two: contentions and [] symbol.
+
+
+View the top contending locks:
+
+# grep : /proc/lock_stat | head
+ &inode->i_data.tree_lock-W: 15 21657 0.18 1093295.30 11547131054.85 58 10415 0.16 87.51 6387.60
+ &inode->i_data.tree_lock-R: 0 0 0.00 0.00 0.00 23302 231198 0.25 8.45 98023.38
+ dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24
+ &inode->i_mutex: 161 286 18446744073709 62882.54 1244614.55 3653 20598 18446744073709 62318.60 1693822.74
+ &zone->lru_lock: 94 94 0.53 7.33 92.10 4366 32690 0.29 59.81 16350.06
+ &inode->i_data.i_mmap_lock: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44
+ &q->__queue_lock: 48 50 0.52 31.62 86.31 774 13131 0.17 113.08 12277.52
+ &rq->rq_lock_key: 43 47 0.74 68.50 170.63 3706 33929 0.22 107.99 17460.62
+ &rq->rq_lock_key#2: 39 46 0.75 6.68 49.03 2979 32292 0.17 125.17 17137.63
+ tasklist_lock-W: 15 15 1.45 10.87 32.70 1201 7390 0.58 62.55 13648.47
+
+Clear the statistics:
+
+# echo 0 > /proc/lock_stat
diff --git a/trunk/Documentation/networking/NAPI_HOWTO.txt b/trunk/Documentation/networking/NAPI_HOWTO.txt
deleted file mode 100644
index 7907435a661c..000000000000
--- a/trunk/Documentation/networking/NAPI_HOWTO.txt
+++ /dev/null
@@ -1,766 +0,0 @@
-HISTORY:
-February 16/2002 -- revision 0.2.1:
-COR typo corrected
-February 10/2002 -- revision 0.2:
-some spell checking ;->
-January 12/2002 -- revision 0.1
-This is still work in progress so may change.
-To keep up to date please watch this space.
-
-Introduction to NAPI
-====================
-
-NAPI is a proven (www.cyberus.ca/~hadi/usenix-paper.tgz) technique
-to improve network performance on Linux. For more details please
-read that paper.
-NAPI provides a "inherent mitigation" which is bound by system capacity
-as can be seen from the following data collected by Robert on Gigabit
-ethernet (e1000):
-
- Psize Ipps Tput Rxint Txint Done Ndone
- ---------------------------------------------------------------
- 60 890000 409362 17 27622 7 6823
- 128 758150 464364 21 9301 10 7738
- 256 445632 774646 42 15507 21 12906
- 512 232666 994445 241292 19147 241192 1062
- 1024 119061 1000003 872519 19258 872511 0
- 1440 85193 1000003 946576 19505 946569 0
-
-
-Legend:
-"Ipps" stands for input packets per second.
-"Tput" == packets out of total 1M that made it out.
-"txint" == transmit completion interrupts seen
-"Done" == The number of times that the poll() managed to pull all
-packets out of the rx ring. Note from this that the lower the
-load the more we could clean up the rxring
-"Ndone" == is the converse of "Done". Note again, that the higher
-the load the more times we couldn't clean up the rxring.
-
-Observe that:
-when the NIC receives 890Kpackets/sec only 17 rx interrupts are generated.
-The system cant handle the processing at 1 interrupt/packet at that load level.
-At lower rates on the other hand, rx interrupts go up and therefore the
-interrupt/packet ratio goes up (as observable from that table). So there is
-possibility that under low enough input, you get one poll call for each
-input packet caused by a single interrupt each time. And if the system
-cant handle interrupt per packet ratio of 1, then it will just have to
-chug along ....
-
-
-0) Prerequisites:
-==================
-A driver MAY continue using the old 2.4 technique for interfacing
-to the network stack and not benefit from the NAPI changes.
-NAPI additions to the kernel do not break backward compatibility.
-NAPI, however, requires the following features to be available:
-
-A) DMA ring or enough RAM to store packets in software devices.
-
-B) Ability to turn off interrupts or maybe events that send packets up
-the stack.
-
-NAPI processes packet events in what is known as dev->poll() method.
-Typically, only packet receive events are processed in dev->poll().
-The rest of the events MAY be processed by the regular interrupt handler
-to reduce processing latency (justified also because there are not that
-many of them).
-Note, however, NAPI does not enforce that dev->poll() only processes
-receive events.
-Tests with the tulip driver indicated slightly increased latency if
-all of the interrupt handler is moved to dev->poll(). Also MII handling
-gets a little trickier.
-The example used in this document is to move the receive processing only
-to dev->poll(); this is shown with the patch for the tulip driver.
-For an example of code that moves all the interrupt driver to
-dev->poll() look at the ported e1000 code.
-
-There are caveats that might force you to go with moving everything to
-dev->poll(). Different NICs work differently depending on their status/event
-acknowledgement setup.
-There are two types of event register ACK mechanisms.
- I) what is known as Clear-on-read (COR).
- when you read the status/event register, it clears everything!
- The natsemi and sunbmac NICs are known to do this.
- In this case your only choice is to move all to dev->poll()
-
- II) Clear-on-write (COW)
- i) you clear the status by writing a 1 in the bit-location you want.
- These are the majority of the NICs and work the best with NAPI.
- Put only receive events in dev->poll(); leave the rest in
- the old interrupt handler.
- ii) whatever you write in the status register clears every thing ;->
- Cant seem to find any supported by Linux which do this. If
- someone knows such a chip email us please.
- Move all to dev->poll()
-
-C) Ability to detect new work correctly.
-NAPI works by shutting down event interrupts when there's work and
-turning them on when there's none.
-New packets might show up in the small window while interrupts were being
-re-enabled (refer to appendix 2). A packet might sneak in during the period
-we are enabling interrupts. We only get to know about such a packet when the
-next new packet arrives and generates an interrupt.
-Essentially, there is a small window of opportunity for a race condition
-which for clarity we'll refer to as the "rotting packet".
-
-This is a very important topic and appendix 2 is dedicated for more
-discussion.
-
-Locking rules and environmental guarantees
-==========================================
-
--Guarantee: Only one CPU at any time can call dev->poll(); this is because
-only one CPU can pick the initial interrupt and hence the initial
-netif_rx_schedule(dev);
-- The core layer invokes devices to send packets in a round robin format.
-This implies receive is totally lockless because of the guarantee that only
-one CPU is executing it.
-- contention can only be the result of some other CPU accessing the rx
-ring. This happens only in close() and suspend() (when these methods
-try to clean the rx ring);
-****guarantee: driver authors need not worry about this; synchronization
-is taken care for them by the top net layer.
--local interrupts are enabled (if you dont move all to dev->poll()). For
-example link/MII and txcomplete continue functioning just same old way.
-This improves the latency of processing these events. It is also assumed that
-the receive interrupt is the largest cause of noise. Note this might not
-always be true.
-[according to Manfred Spraul, the winbond insists on sending one
-txmitcomplete interrupt for each packet (although this can be mitigated)].
-For these broken drivers, move all to dev->poll().
-
-For the rest of this text, we'll assume that dev->poll() only
-processes receive events.
-
-new methods introduce by NAPI
-=============================
-
-a) netif_rx_schedule(dev)
-Called by an IRQ handler to schedule a poll for device
-
-b) netif_rx_schedule_prep(dev)
-puts the device in a state which allows for it to be added to the
-CPU polling list if it is up and running. You can look at this as
-the first half of netif_rx_schedule(dev) above; the second half
-being c) below.
-
-c) __netif_rx_schedule(dev)
-Add device to the poll list for this CPU; assuming that _prep above
-has already been called and returned 1.
-
-d) netif_rx_reschedule(dev, undo)
-Called to reschedule polling for device specifically for some
-deficient hardware. Read Appendix 2 for more details.
-
-e) netif_rx_complete(dev)
-
-Remove interface from the CPU poll list: it must be in the poll list
-on current cpu. This primitive is called by dev->poll(), when
-it completes its work. The device cannot be out of poll list at this
-call, if it is then clearly it is a BUG(). You'll know ;->
-
-All of the above methods are used below, so keep reading for clarity.
-
-Device driver changes to be made when porting NAPI
-==================================================
-
-Below we describe what kind of changes are required for NAPI to work.
-
-1) introduction of dev->poll() method
-=====================================
-
-This is the method that is invoked by the network core when it requests
-for new packets from the driver. A driver is allowed to send upto
-dev->quota packets by the current CPU before yielding to the network
-subsystem (so other devices can also get opportunity to send to the stack).
-
-dev->poll() prototype looks as follows:
-int my_poll(struct net_device *dev, int *budget)
-
-budget is the remaining number of packets the network subsystem on the
-current CPU can send up the stack before yielding to other system tasks.
-*Each driver is responsible for decrementing budget by the total number of
-packets sent.
- Total number of packets cannot exceed dev->quota.
-
-dev->poll() method is invoked by the top layer, the driver just sends if it
-can to the stack the packet quantity requested.
-
-more on dev->poll() below after the interrupt changes are explained.
-
-2) registering dev->poll() method
-===================================
-
-dev->poll should be set in the dev->probe() method.
-e.g:
-dev->open = my_open;
-.
-.
-/* two new additions */
-/* first register my poll method */
-dev->poll = my_poll;
-/* next register my weight/quanta; can be overridden in /proc */
-dev->weight = 16;
-.
-.
-dev->stop = my_close;
-
-
-
-3) scheduling dev->poll()
-=============================
-This involves modifying the interrupt handler and the code
-path which takes the packet off the NIC and sends them to the
-stack.
-
-it's important at this point to introduce the classical D Becker
-interrupt processor:
-
-------------------
-static irqreturn_t
-netdevice_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-
- struct net_device *dev = (struct net_device *)dev_instance;
- struct my_private *tp = (struct my_private *)dev->priv;
-
- int work_count = my_work_count;
- status = read_interrupt_status_reg();
- if (status == 0)
- return IRQ_NONE; /* Shared IRQ: not us */
- if (status == 0xffff)
- return IRQ_HANDLED; /* Hot unplug */
- if (status & error)
- do_some_error_handling()
-
- do {
- acknowledge_ints_ASAP();
-
- if (status & link_interrupt) {
- spin_lock(&tp->link_lock);
- do_some_link_stat_stuff();
- spin_lock(&tp->link_lock);
- }
-
- if (status & rx_interrupt) {
- receive_packets(dev);
- }
-
- if (status & rx_nobufs) {
- make_rx_buffs_avail();
- }
-
- if (status & tx_related) {
- spin_lock(&tp->lock);
- tx_ring_free(dev);
- if (tx_died)
- restart_tx();
- spin_unlock(&tp->lock);
- }
-
- status = read_interrupt_status_reg();
-
- } while (!(status & error) || more_work_to_be_done);
- return IRQ_HANDLED;
-}
-
-----------------------------------------------------------------------
-
-We now change this to what is shown below to NAPI-enable it:
-
-----------------------------------------------------------------------
-static irqreturn_t
-netdevice_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct net_device *dev = (struct net_device *)dev_instance;
- struct my_private *tp = (struct my_private *)dev->priv;
-
- status = read_interrupt_status_reg();
- if (status == 0)
- return IRQ_NONE; /* Shared IRQ: not us */
- if (status == 0xffff)
- return IRQ_HANDLED; /* Hot unplug */
- if (status & error)
- do_some_error_handling();
-
- do {
-/************************ start note *********************************/
- acknowledge_ints_ASAP(); // dont ack rx and rxnobuff here
-/************************ end note *********************************/
-
- if (status & link_interrupt) {
- spin_lock(&tp->link_lock);
- do_some_link_stat_stuff();
- spin_unlock(&tp->link_lock);
- }
-/************************ start note *********************************/
- if (status & rx_interrupt || (status & rx_nobuffs)) {
- if (netif_rx_schedule_prep(dev)) {
-
- /* disable interrupts caused
- * by arriving packets */
- disable_rx_and_rxnobuff_ints();
- /* tell system we have work to be done. */
- __netif_rx_schedule(dev);
- } else {
- printk("driver bug! interrupt while in poll\n");
- /* FIX by disabling interrupts */
- disable_rx_and_rxnobuff_ints();
- }
- }
-/************************ end note note *********************************/
-
- if (status & tx_related) {
- spin_lock(&tp->lock);
- tx_ring_free(dev);
-
- if (tx_died)
- restart_tx();
- spin_unlock(&tp->lock);
- }
-
- status = read_interrupt_status_reg();
-
-/************************ start note *********************************/
- } while (!(status & error) || more_work_to_be_done(status));
-/************************ end note note *********************************/
- return IRQ_HANDLED;
-}
-
----------------------------------------------------------------------
-
-
-We note several things from above:
-
-I) Any interrupt source which is caused by arriving packets is now
-turned off when it occurs. Depending on the hardware, there could be
-several reasons that arriving packets would cause interrupts; these are the
-interrupt sources we wish to avoid. The two common ones are a) a packet
-arriving (rxint) b) a packet arriving and finding no DMA buffers available
-(rxnobuff) .
-This means also acknowledge_ints_ASAP() will not clear the status
-register for those two items above; clearing is done in the place where
-proper work is done within NAPI; at the poll() and refill_rx_ring()
-discussed further below.
-netif_rx_schedule_prep() returns 1 if device is in running state and
-gets successfully added to the core poll list. If we get a zero value
-we can _almost_ assume are already added to the list (instead of not running.
-Logic based on the fact that you shouldn't get interrupt if not running)
-We rectify this by disabling rx and rxnobuf interrupts.
-
-II) that receive_packets(dev) and make_rx_buffs_avail() may have disappeared.
-These functionalities are still around actually......
-
-infact, receive_packets(dev) is very close to my_poll() and
-make_rx_buffs_avail() is invoked from my_poll()
-
-4) converting receive_packets() to dev->poll()
-===============================================
-
-We need to convert the classical D Becker receive_packets(dev) to my_poll()
-
-First the typical receive_packets() below:
--------------------------------------------------------------------
-
-/* this is called by interrupt handler */
-static void receive_packets (struct net_device *dev)
-{
-
- struct my_private *tp = (struct my_private *)dev->priv;
- rx_ring = tp->rx_ring;
- cur_rx = tp->cur_rx;
- int entry = cur_rx % RX_RING_SIZE;
- int received = 0;
- int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
-
- while (rx_ring_not_empty) {
- u32 rx_status;
- unsigned int rx_size;
- unsigned int pkt_size;
- struct sk_buff *skb;
- /* read size+status of next frame from DMA ring buffer */
- /* the number 16 and 4 are just examples */
- rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset));
- rx_size = rx_status >> 16;
- pkt_size = rx_size - 4;
-
- /* process errors */
- if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
- (!(rx_status & RxStatusOK))) {
- netdrv_rx_err (rx_status, dev, tp, ioaddr);
- return;
- }
-
- if (--rx_work_limit < 0)
- break;
-
- /* grab a skb */
- skb = dev_alloc_skb (pkt_size + 2);
- if (skb) {
- .
- .
- netif_rx (skb);
- .
- .
- } else { /* OOM */
- /*seems very driver specific ... some just pass
- whatever is on the ring already. */
- }
-
- /* move to the next skb on the ring */
- entry = (++tp->cur_rx) % RX_RING_SIZE;
- received++ ;
-
- }
-
- /* store current ring pointer state */
- tp->cur_rx = cur_rx;
-
- /* Refill the Rx ring buffers if they are needed */
- refill_rx_ring();
- .
- .
-
-}
--------------------------------------------------------------------
-We change it to a new one below; note the additional parameter in
-the call.
-
--------------------------------------------------------------------
-
-/* this is called by the network core */
-static int my_poll (struct net_device *dev, int *budget)
-{
-
- struct my_private *tp = (struct my_private *)dev->priv;
- rx_ring = tp->rx_ring;
- cur_rx = tp->cur_rx;
- int entry = cur_rx % RX_BUF_LEN;
- /* maximum packets to send to the stack */
-/************************ note note *********************************/
- int rx_work_limit = dev->quota;
-
-/************************ end note note *********************************/
- do { // outer beginning loop starts here
-
- clear_rx_status_register_bit();
-
- while (rx_ring_not_empty) {
- u32 rx_status;
- unsigned int rx_size;
- unsigned int pkt_size;
- struct sk_buff *skb;
- /* read size+status of next frame from DMA ring buffer */
- /* the number 16 and 4 are just examples */
- rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset));
- rx_size = rx_status >> 16;
- pkt_size = rx_size - 4;
-
- /* process errors */
- if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
- (!(rx_status & RxStatusOK))) {
- netdrv_rx_err (rx_status, dev, tp, ioaddr);
- return 1;
- }
-
-/************************ note note *********************************/
- if (--rx_work_limit < 0) { /* we got packets, but no quota */
- /* store current ring pointer state */
- tp->cur_rx = cur_rx;
-
- /* Refill the Rx ring buffers if they are needed */
- refill_rx_ring(dev);
- goto not_done;
- }
-/********************** end note **********************************/
-
- /* grab a skb */
- skb = dev_alloc_skb (pkt_size + 2);
- if (skb) {
- .
- .
-/************************ note note *********************************/
- netif_receive_skb (skb);
-/********************** end note **********************************/
- .
- .
- } else { /* OOM */
- /*seems very driver specific ... common is just pass
- whatever is on the ring already. */
- }
-
- /* move to the next skb on the ring */
- entry = (++tp->cur_rx) % RX_RING_SIZE;
- received++ ;
-
- }
-
- /* store current ring pointer state */
- tp->cur_rx = cur_rx;
-
- /* Refill the Rx ring buffers if they are needed */
- refill_rx_ring(dev);
-
- /* no packets on ring; but new ones can arrive since we last
- checked */
- status = read_interrupt_status_reg();
- if (rx status is not set) {
- /* If something arrives in this narrow window,
- an interrupt will be generated */
- goto done;
- }
- /* done! at least that's what it looks like ;->
- if new packets came in after our last check on status bits
- they'll be caught by the while check and we go back and clear them
- since we havent exceeded our quota */
- } while (rx_status_is_set);
-
-done:
-
-/************************ note note *********************************/
- dev->quota -= received;
- *budget -= received;
-
- /* If RX ring is not full we are out of memory. */
- if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
- goto oom;
-
- /* we are happy/done, no more packets on ring; put us back
- to where we can start processing interrupts again */
- netif_rx_complete(dev);
- enable_rx_and_rxnobuf_ints();
-
- /* The last op happens after poll completion. Which means the following:
- * 1. it can race with disabling irqs in irq handler (which are done to
- * schedule polls)
- * 2. it can race with dis/enabling irqs in other poll threads
- * 3. if an irq raised after the beginning of the outer beginning
- * loop (marked in the code above), it will be immediately
- * triggered here.
- *
- * Summarizing: the logic may result in some redundant irqs both
- * due to races in masking and due to too late acking of already
- * processed irqs. The good news: no events are ever lost.
- */
-
- return 0; /* done */
-
-not_done:
- if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
- tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
- refill_rx_ring(dev);
-
- if (!received) {
- printk("received==0\n");
- received = 1;
- }
- dev->quota -= received;
- *budget -= received;
- return 1; /* not_done */
-
-oom:
- /* Start timer, stop polling, but do not enable rx interrupts. */
- start_poll_timer(dev);
- return 0; /* we'll take it from here so tell core "done"*/
-
-/************************ End note note *********************************/
-}
--------------------------------------------------------------------
-
-From above we note that:
-0) rx_work_limit = dev->quota
-1) refill_rx_ring() is in charge of clearing the bit for rxnobuff when
-it does the work.
-2) We have a done and not_done state.
-3) instead of netif_rx() we call netif_receive_skb() to pass the skb.
-4) we have a new way of handling oom condition
-5) A new outer for (;;) loop has been added. This serves the purpose of
-ensuring that if a new packet has come in, after we are all set and done,
-and we have not exceeded our quota that we continue sending packets up.
-
-
------------------------------------------------------------
-Poll timer code will need to do the following:
-
-a)
-
- if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
- tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
- refill_rx_ring(dev);
-
- /* If RX ring is not full we are still out of memory.
- Restart the timer again. Else we re-add ourselves
- to the master poll list.
- */
-
- if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
- restart_timer();
-
- else netif_rx_schedule(dev); /* we are back on the poll list */
-
-5) dev->close() and dev->suspend() issues
-==========================================
-The driver writer needn't worry about this; the top net layer takes
-care of it.
-
-6) Adding new Stats to /proc
-=============================
-In order to debug some of the new features, we introduce new stats
-that need to be collected.
-TODO: Fill this later.
-
-APPENDIX 1: discussion on using ethernet HW FC
-==============================================
-Most chips with FC only send a pause packet when they run out of Rx buffers.
-Since packets are pulled off the DMA ring by a softirq in NAPI,
-if the system is slow in grabbing them and we have a high input
-rate (faster than the system's capacity to remove packets), then theoretically
-there will only be one rx interrupt for all packets during a given packetstorm.
-Under low load, we might have a single interrupt per packet.
-FC should be programmed to apply in the case when the system cant pull out
-packets fast enough i.e send a pause only when you run out of rx buffers.
-Note FC in itself is a good solution but we have found it to not be
-much of a commodity feature (both in NICs and switches) and hence falls
-under the same category as using NIC based mitigation. Also, experiments
-indicate that it's much harder to resolve the resource allocation
-issue (aka lazy receiving that NAPI offers) and hence quantify its usefulness
-proved harder. In any case, FC works even better with NAPI but is not
-necessary.
-
-
-APPENDIX 2: the "rotting packet" race-window avoidance scheme
-=============================================================
-
-There are two types of associations seen here
-
-1) status/int which honors level triggered IRQ
-
-If a status bit for receive or rxnobuff is set and the corresponding
-interrupt-enable bit is not on, then no interrupts will be generated. However,
-as soon as the "interrupt-enable" bit is unmasked, an immediate interrupt is
-generated. [assuming the status bit was not turned off].
-Generally the concept of level triggered IRQs in association with a status and
-interrupt-enable CSR register set is used to avoid the race.
-
-If we take the example of the tulip:
-"pending work" is indicated by the status bit(CSR5 in tulip).
-the corresponding interrupt bit (CSR7 in tulip) might be turned off (but
-the CSR5 will continue to be turned on with new packet arrivals even if
-we clear it the first time)
-Very important is the fact that if we turn on the interrupt bit on when
-status is set that an immediate irq is triggered.
-
-If we cleared the rx ring and proclaimed there was "no more work
-to be done" and then went on to do a few other things; then when we enable
-interrupts, there is a possibility that a new packet might sneak in during
-this phase. It helps to look at the pseudo code for the tulip poll
-routine:
-
---------------------------
- do {
- ACK;
- while (ring_is_not_empty()) {
- work-work-work
- if quota is exceeded: exit, no touching irq status/mask
- }
- /* No packets, but new can arrive while we are doing this*/
- CSR5 := read
- if (CSR5 is not set) {
- /* If something arrives in this narrow window here,
- * where the comments are ;-> irq will be generated */
- unmask irqs;
- exit poll;
- }
- } while (rx_status_is_set);
-------------------------
-
-CSR5 bit of interest is only the rx status.
-If you look at the last if statement:
-you just finished grabbing all the packets from the rx ring .. you check if
-status bit says there are more packets just in ... it says none; you then
-enable rx interrupts again; if a new packet just came in during this check,
-we are counting that CSR5 will be set in that small window of opportunity
-and that by re-enabling interrupts, we would actually trigger an interrupt
-to register the new packet for processing.
-
-[The above description nay be very verbose, if you have better wording
-that will make this more understandable, please suggest it.]
-
-2) non-capable hardware
-
-These do not generally respect level triggered IRQs. Normally,
-irqs may be lost while being masked and the only way to leave poll is to do
-a double check for new input after netif_rx_complete() is invoked
-and re-enable polling (after seeing this new input).
-
-Sample code:
-
----------
- .
- .
-restart_poll:
- while (ring_is_not_empty()) {
- work-work-work
- if quota is exceeded: exit, not touching irq status/mask
- }
- .
- .
- .
- enable_rx_interrupts()
- netif_rx_complete(dev);
- if (ring_has_new_packet() && netif_rx_reschedule(dev, received)) {
- disable_rx_and_rxnobufs()
- goto restart_poll
- } while (rx_status_is_set);
----------
-
-Basically netif_rx_complete() removes us from the poll list, but because a
-new packet which will never be caught due to the possibility of a race
-might come in, we attempt to re-add ourselves to the poll list.
-
-
-
-
-APPENDIX 3: Scheduling issues.
-==============================
-As seen NAPI moves processing to softirq level. Linux uses the ksoftirqd as the
-general solution to schedule softirq's to run before next interrupt and by putting
-them under scheduler control. Also this prevents consecutive softirq's from
-monopolize the CPU. This also have the effect that the priority of ksoftirq needs
-to be considered when running very CPU-intensive applications and networking to
-get the proper balance of softirq/user balance. Increasing ksoftirq priority to 0
-(eventually more) is reported cure problems with low network performance at high
-CPU load.
-
-Most used processes in a GIGE router:
-USER PID %CPU %MEM SIZE RSS TTY STAT START TIME COMMAND
-root 3 0.2 0.0 0 0 ? RWN Aug 15 602:00 (ksoftirqd_CPU0)
-root 232 0.0 7.9 41400 40884 ? S Aug 15 74:12 gated
-
---------------------------------------------------------------------
-
-relevant sites:
-==================
-ftp://robur.slu.se/pub/Linux/net-development/NAPI/
-
-
---------------------------------------------------------------------
-TODO: Write net-skeleton.c driver.
--------------------------------------------------------------
-
-Authors:
-========
-Alexey Kuznetsov
-Jamal Hadi Salim
-Robert Olsson
-
-Acknowledgements:
-================
-People who made this document better:
-
-Lennert Buytenhek
-Andrew Morton
-Manfred Spraul
-Donald Becker
-Jeff Garzik
diff --git a/trunk/Documentation/networking/dccp.txt b/trunk/Documentation/networking/dccp.txt
index 4504cc59e405..afb66f9a8aff 100644
--- a/trunk/Documentation/networking/dccp.txt
+++ b/trunk/Documentation/networking/dccp.txt
@@ -38,8 +38,13 @@ Socket options
DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
the socket will fall back to 0 (which means that no meaningful service code
-is present). Connecting sockets set at most one service option; for
-listening sockets, multiple service codes can be specified.
+is present). On active sockets this is set before connect(); specifying more
+than one code has no effect (all subsequent service codes are ignored). The
+case is different for passive sockets, where multiple service codes (up to 32)
+can be set before calling bind().
+
+DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
+size (application payload size) in bytes, see RFC 4340, section 14.
DCCP_SOCKOPT_SEND_CSCOV and DCCP_SOCKOPT_RECV_CSCOV are used for setting the
partial checksum coverage (RFC 4340, sec. 9.2). The default is that checksums
@@ -50,12 +55,13 @@ be enabled at the receiver, too with suitable choice of CsCov.
DCCP_SOCKOPT_SEND_CSCOV sets the sender checksum coverage. Values in the
range 0..15 are acceptable. The default setting is 0 (full coverage),
values between 1..15 indicate partial coverage.
-DCCP_SOCKOPT_SEND_CSCOV is for the receiver and has a different meaning: it
+DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it
sets a threshold, where again values 0..15 are acceptable. The default
of 0 means that all packets with a partial coverage will be discarded.
Values in the range 1..15 indicate that packets with minimally such a
coverage value are also acceptable. The higher the number, the more
- restrictive this setting (see [RFC 4340, sec. 9.2.1]).
+ restrictive this setting (see [RFC 4340, sec. 9.2.1]). Partial coverage
+ settings are inherited to the child socket after accept().
The following two options apply to CCID 3 exclusively and are getsockopt()-only.
In either case, a TFRC info struct (defined in ) is returned.
@@ -112,9 +118,14 @@ tx_qlen = 5
The size of the transmit buffer in packets. A value of 0 corresponds
to an unbounded transmit buffer.
+sync_ratelimit = 125 ms
+ The timeout between subsequent DCCP-Sync packets sent in response to
+ sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
+ of this parameter is milliseconds; a value of 0 disables rate-limiting.
+
Notes
=====
DCCP does not travel through NAT successfully at present on many boxes. This is
-because the checksum covers the psuedo-header as per TCP and UDP. Linux NAT
+because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
support for DCCP has been added.
diff --git a/trunk/Documentation/networking/dgrs.txt b/trunk/Documentation/networking/dgrs.txt
deleted file mode 100644
index 1aa1bb3f94ab..000000000000
--- a/trunk/Documentation/networking/dgrs.txt
+++ /dev/null
@@ -1,52 +0,0 @@
- The Digi International RightSwitch SE-X (dgrs) Device Driver
-
-This is a Linux driver for the Digi International RightSwitch SE-X
-EISA and PCI boards. These are 4 (EISA) or 6 (PCI) port Ethernet
-switches and a NIC combined into a single board. This driver can
-be compiled into the kernel statically or as a loadable module.
-
-There is also a companion management tool, called "xrightswitch".
-The management tool lets you watch the performance graphically,
-as well as set the SNMP agent IP and IPX addresses, IEEE Spanning
-Tree, and Aging time. These can also be set from the command line
-when the driver is loaded. The driver command line options are:
-
- debug=NNN Debug printing level
- dma=0/1 Disable/Enable DMA on PCI card
- spantree=0/1 Disable/Enable IEEE spanning tree
- hashexpire=NNN Change address aging time (default 300 seconds)
- ipaddr=A,B,C,D Set SNMP agent IP address i.e. 199,86,8,221
- iptrap=A,B,C,D Set SNMP agent IP trap address i.e. 199,86,8,221
- ipxnet=NNN Set SNMP agent IPX network number
- nicmode=0/1 Disable/Enable multiple NIC mode
-
-There is also a tool for setting up input and output packet filters
-on each port, called "dgrsfilt".
-
-Both the management tool and the filtering tool are available
-separately from the following FTP site:
-
- ftp://ftp.dgii.com/drivers/rightswitch/linux/
-
-When nicmode=1, the board and driver operate as 4 or 6 individual
-NIC ports (eth0...eth5) instead of as a switch. All switching
-functions are disabled. In the future, the board firmware may include
-a routing cache when in this mode.
-
-Copyright 1995-1996 Digi International Inc.
-
-This software may be used and distributed according to the terms
-of the GNU General Public License, incorporated herein by reference.
-
-For information on purchasing a RightSwitch SE-4 or SE-6
-board, please contact Digi's sales department at 1-612-912-3444
-or 1-800-DIGIBRD. Outside the U.S., please check our Web page at:
-
- http://www.dgii.com
-
-for sales offices worldwide. Tech support is also available through
-the channels listed on the Web site, although as long as I am
-employed on networking products at Digi I will be happy to provide
-any bug fixes that may be needed.
-
--Rick Richardson, rick@dgii.com
diff --git a/trunk/Documentation/networking/ip-sysctl.txt b/trunk/Documentation/networking/ip-sysctl.txt
index 32c2e9da5f3a..6ae2feff3087 100644
--- a/trunk/Documentation/networking/ip-sysctl.txt
+++ b/trunk/Documentation/networking/ip-sysctl.txt
@@ -180,13 +180,20 @@ tcp_fin_timeout - INTEGER
to live longer. Cf. tcp_max_orphans.
tcp_frto - INTEGER
- Enables F-RTO, an enhanced recovery algorithm for TCP retransmission
+ Enables Forward RTO-Recovery (F-RTO) defined in RFC4138.
+ F-RTO is an enhanced recovery algorithm for TCP retransmission
timeouts. It is particularly beneficial in wireless environments
where packet loss is typically due to random radio interference
- rather than intermediate router congestion. If set to 1, basic
- version is enabled. 2 enables SACK enhanced F-RTO, which is
- EXPERIMENTAL. The basic version can be used also when SACK is
- enabled for a flow through tcp_sack sysctl.
+ rather than intermediate router congestion. FRTO is sender-side
+ only modification. Therefore it does not require any support from
+ the peer, but in a typical case, however, where wireless link is
+ the local access link and most of the data flows downlink, the
+ faraway servers should have FRTO enabled to take advantage of it.
+ If set to 1, basic version is enabled. 2 enables SACK enhanced
+ F-RTO if flow uses SACK. The basic version can be used also when
+ SACK is in use though scenario(s) with it exists where FRTO
+ interacts badly with the packet counting of the SACK enabled TCP
+ flow.
tcp_frto_response - INTEGER
When F-RTO has detected that a TCP retransmission timeout was
diff --git a/trunk/Documentation/networking/mac80211-injection.txt b/trunk/Documentation/networking/mac80211-injection.txt
index 53ef7a06f49c..84906ef3ed6e 100644
--- a/trunk/Documentation/networking/mac80211-injection.txt
+++ b/trunk/Documentation/networking/mac80211-injection.txt
@@ -13,15 +13,35 @@ The radiotap format is discussed in
./Documentation/networking/radiotap-headers.txt.
Despite 13 radiotap argument types are currently defined, most only make sense
-to appear on received packets. Currently three kinds of argument are used by
-the injection code, although it knows to skip any other arguments that are
-present (facilitating replay of captured radiotap headers directly):
+to appear on received packets. The following information is parsed from the
+radiotap headers and used to control injection:
- - IEEE80211_RADIOTAP_RATE - u8 arg in 500kbps units (0x02 --> 1Mbps)
+ * IEEE80211_RADIOTAP_RATE
- - IEEE80211_RADIOTAP_ANTENNA - u8 arg, 0x00 = ant1, 0x01 = ant2
+ rate in 500kbps units, automatic if invalid or not present
- - IEEE80211_RADIOTAP_DBM_TX_POWER - u8 arg, dBm
+
+ * IEEE80211_RADIOTAP_ANTENNA
+
+ antenna to use, automatic if not present
+
+
+ * IEEE80211_RADIOTAP_DBM_TX_POWER
+
+ transmit power in dBm, automatic if not present
+
+
+ * IEEE80211_RADIOTAP_FLAGS
+
+ IEEE80211_RADIOTAP_F_FCS: FCS will be removed and recalculated
+ IEEE80211_RADIOTAP_F_WEP: frame will be encrypted if key available
+ IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the
+ current fragmentation threshold. Note that
+ this flag is only reliable when software
+ fragmentation is enabled)
+
+The injection code can also skip all other currently defined radiotap fields
+facilitating replay of captured radiotap headers directly.
Here is an example valid radiotap header defining these three parameters
diff --git a/trunk/Documentation/networking/netconsole.txt b/trunk/Documentation/networking/netconsole.txt
index 1caa6c734691..3c2f2b328638 100644
--- a/trunk/Documentation/networking/netconsole.txt
+++ b/trunk/Documentation/networking/netconsole.txt
@@ -3,6 +3,10 @@ started by Ingo Molnar , 2001.09.17
2.6 port and netpoll api by Matt Mackall , Sep 9 2003
Please send bug reports to Matt Mackall
+and Satyam Sharma
+
+Introduction:
+=============
This module logs kernel printk messages over UDP allowing debugging of
problem where disk logging fails and serial consoles are impractical.
@@ -13,6 +17,9 @@ the specified interface as soon as possible. While this doesn't allow
capture of early kernel panics, it does capture most of the boot
process.
+Sender and receiver configuration:
+==================================
+
It takes a string configuration parameter "netconsole" in the
following format:
@@ -34,21 +41,113 @@ Examples:
insmod netconsole netconsole=@/,@10.0.0.2/
+It also supports logging to multiple remote agents by specifying
+parameters for the multiple agents separated by semicolons and the
+complete string enclosed in "quotes", thusly:
+
+ modprobe netconsole netconsole="@/,@10.0.0.2/;@/eth1,6892@10.0.0.3/"
+
Built-in netconsole starts immediately after the TCP stack is
initialized and attempts to bring up the supplied dev at the supplied
address.
The remote host can run either 'netcat -u -l -p ' or syslogd.
+Dynamic reconfiguration:
+========================
+
+Dynamic reconfigurability is a useful addition to netconsole that enables
+remote logging targets to be dynamically added, removed, or have their
+parameters reconfigured at runtime from a configfs-based userspace interface.
+[ Note that the parameters of netconsole targets that were specified/created
+from the boot/module option are not exposed via this interface, and hence
+cannot be modified dynamically. ]
+
+To include this feature, select CONFIG_NETCONSOLE_DYNAMIC when building the
+netconsole module (or kernel, if netconsole is built-in).
+
+Some examples follow (where configfs is mounted at the /sys/kernel/config
+mountpoint).
+
+To add a remote logging target (target names can be arbitrary):
+
+ cd /sys/kernel/config/netconsole/
+ mkdir target1
+
+Note that newly created targets have default parameter values (as mentioned
+above) and are disabled by default -- they must first be enabled by writing
+"1" to the "enabled" attribute (usually after setting parameters accordingly)
+as described below.
+
+To remove a target:
+
+ rmdir /sys/kernel/config/netconsole/othertarget/
+
+The interface exposes these parameters of a netconsole target to userspace:
+
+ enabled Is this target currently enabled? (read-write)
+ dev_name Local network interface name (read-write)
+ local_port Source UDP port to use (read-write)
+ remote_port Remote agent's UDP port (read-write)
+ local_ip Source IP address to use (read-write)
+ remote_ip Remote agent's IP address (read-write)
+ local_mac Local interface's MAC address (read-only)
+ remote_mac Remote agent's MAC address (read-write)
+
+The "enabled" attribute is also used to control whether the parameters of
+a target can be updated or not -- you can modify the parameters of only
+disabled targets (i.e. if "enabled" is 0).
+
+To update a target's parameters:
+
+ cat enabled # check if enabled is 1
+ echo 0 > enabled # disable the target (if required)
+ echo eth2 > dev_name # set local interface
+ echo 10.0.0.4 > remote_ip # update some parameter
+ echo cb:a9:87:65:43:21 > remote_mac # update more parameters
+ echo 1 > enabled # enable target again
+
+You can also update the local interface dynamically. This is especially
+useful if you want to use interfaces that have newly come up (and may not
+have existed when netconsole was loaded / initialized).
+
+Miscellaneous notes:
+====================
+
WARNING: the default target ethernet setting uses the broadcast
ethernet address to send packets, which can cause increased load on
other systems on the same ethernet segment.
+TIP: some LAN switches may be configured to suppress ethernet broadcasts
+so it is advised to explicitly specify the remote agents' MAC addresses
+from the config parameters passed to netconsole.
+
+TIP: to find out the MAC address of, say, 10.0.0.2, you may try using:
+
+ ping -c 1 10.0.0.2 ; /sbin/arp -n | grep 10.0.0.2
+
+TIP: in case the remote logging agent is on a separate LAN subnet than
+the sender, it is suggested to try specifying the MAC address of the
+default gateway (you may use /sbin/route -n to find it out) as the
+remote MAC address instead.
+
NOTE: the network device (eth1 in the above case) can run any kind
of other network traffic, netconsole is not intrusive. Netconsole
might cause slight delays in other traffic if the volume of kernel
messages is high, but should have no other impact.
+NOTE: if you find that the remote logging agent is not receiving or
+printing all messages from the sender, it is likely that you have set
+the "console_loglevel" parameter (on the sender) to only send high
+priority messages to the console. You can change this at runtime using:
+
+ dmesg -n 8
+
+or by specifying "debug" on the kernel command line at boot, to send
+all kernel messages to the console. A specific value for this parameter
+can also be set using the "loglevel" kernel boot option. See the
+dmesg(8) man page and Documentation/kernel-parameters.txt for details.
+
Netconsole was designed to be as instantaneous as possible, to
enable the logging of even the most critical kernel bugs. It works
from IRQ contexts as well, and does not enable interrupts while
diff --git a/trunk/Documentation/networking/netdevices.txt b/trunk/Documentation/networking/netdevices.txt
index 37869295fc70..d0f71fc7f782 100644
--- a/trunk/Documentation/networking/netdevices.txt
+++ b/trunk/Documentation/networking/netdevices.txt
@@ -73,7 +73,8 @@ dev->hard_start_xmit:
has to lock by itself when needed. It is recommended to use a try lock
for this and return NETDEV_TX_LOCKED when the spin lock fails.
The locking there should also properly protect against
- set_multicast_list.
+ set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated.
+ Dont use it for new drivers.
Context: Process with BHs disabled or BH (timer),
will be called with interrupts disabled by netconsole.
@@ -95,9 +96,13 @@ dev->set_multicast_list:
Synchronization: netif_tx_lock spinlock.
Context: BHs disabled
-dev->poll:
- Synchronization: __LINK_STATE_RX_SCHED bit in dev->state. See
- dev_close code and comments in net/core/dev.c for more info.
+struct napi_struct synchronization rules
+========================================
+napi->poll:
+ Synchronization: NAPI_STATE_SCHED bit in napi->state. Device
+ driver's dev->close method will invoke napi_disable() on
+ all NAPI instances which will do a sleeping poll on the
+ NAPI_STATE_SCHED napi->state bit, waiting for all pending
+ NAPI activity to cease.
Context: softirq
will be called with interrupts disabled by netconsole.
-
diff --git a/trunk/Documentation/powerpc/booting-without-of.txt b/trunk/Documentation/powerpc/booting-without-of.txt
index 76733a3962f0..a96e85397eb7 100644
--- a/trunk/Documentation/powerpc/booting-without-of.txt
+++ b/trunk/Documentation/powerpc/booting-without-of.txt
@@ -50,7 +50,7 @@ Table of Contents
g) Freescale SOC SEC Security Engines
h) Board Control and Status (BCSR)
i) Freescale QUICC Engine module (QE)
- j) Flash chip nodes
+ j) CFI or JEDEC memory-mapped NOR flash
k) Global Utilities Block
VII - Specifying interrupt information for devices
@@ -1510,7 +1510,10 @@ platforms are moved over to use the flattened-device-tree model.
i) Freescale QUICC Engine module (QE)
This represents qe module that is installed on PowerQUICC II Pro.
- Hopefully it will merge backward compatibility with CPM/CPM2.
+
+ NOTE: This is an interim binding; it should be updated to fit
+ in with the CPM binding later in this document.
+
Basically, it is a bus of devices, that could act more or less
as a complete entity (UCC, USB etc ). All of them should be siblings on
the "root" qe node, using the common properties from there.
@@ -1548,7 +1551,7 @@ platforms are moved over to use the flattened-device-tree model.
Required properties:
- device_type : should be "spi".
- compatible : should be "fsl_spi".
- - mode : the SPI operation mode, it can be "cpu" or "qe".
+ - mode : the SPI operation mode, it can be "cpu" or "cpu-qe".
- reg : Offset and length of the register set for the device
- interrupts : where a is the interrupt number and b is a
field that represents an encoding of the sense and level
@@ -1757,45 +1760,69 @@ platforms are moved over to use the flattened-device-tree model.
};
};
- j) Flash chip nodes
+ j) CFI or JEDEC memory-mapped NOR flash
Flash chips (Memory Technology Devices) are often used for solid state
file systems on embedded devices.
- Required properties:
-
- - device_type : has to be "rom"
- - compatible : Should specify what this flash device is compatible with.
- Currently, this is most likely to be "direct-mapped" (which
- corresponds to the MTD physmap mapping driver).
- - reg : Offset and length of the register set (or memory mapping) for
- the device.
- - bank-width : Width of the flash data bus in bytes. Required
- for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
-
- Recommended properties :
-
- - partitions : Several pairs of 32-bit values where the first value is
- partition's offset from the start of the device and the second one is
- partition size in bytes with LSB used to signify a read only
- partition (so, the partition size should always be an even number).
- - partition-names : The list of concatenated zero terminated strings
- representing the partition names.
- - probe-type : The type of probe which should be done for the chip
- (JEDEC vs CFI actually). Valid ONLY for NOR flashes.
+ - compatible : should contain the specific model of flash chip(s)
+ used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range of the flash chip
+ - bank-width : Width (in bytes) of the flash bank. Equal to the
+ device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip. If
+ omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+ sub-nodes representing partitions (see below). In this case
+ both #address-cells and #size-cells must be equal to 1.
+
+ For JEDEC compatible devices, the following additional properties
+ are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+ In addition to the information on the flash bank itself, the
+ device tree may optionally contain additional information
+ describing partitions of the flash address space. This can be
+ used on platforms which have strong conventions about which
+ portions of the flash are used for what purposes, but which don't
+ use an on-flash partition table such as RedBoot.
+
+ Each partition is represented as a sub-node of the flash device.
+ Each node's name represents the name of the corresponding
+ partition of the flash device.
+
+ Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+ If omitted, the label is taken from the node name (excluding
+ the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+ Linux that this flash partition should only be mounted
+ read-only. This is usually used for flash partitions
+ containing early-boot firmware images or data which should not
+ be clobbered.
- Example:
+ Example:
- flash@ff000000 {
- device_type = "rom";
- compatible = "direct-mapped";
- probe-type = "CFI";
- reg = ;
- bank-width = <4>;
- partitions = <00000000 00f80000
- 00f80000 00080001>;
- partition-names = "fs\0firmware";
- };
+ flash@ff000000 {
+ compatible = "amd,am29lv128ml", "cfi-flash";
+ reg = ;
+ bank-width = <4>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ fs@0 {
+ label = "fs";
+ reg = <0 f80000>;
+ };
+ firmware@f80000 {
+ label ="firmware";
+ reg = ;
+ read-only;
+ };
+ };
k) Global Utilities Block
@@ -1824,6 +1851,397 @@ platforms are moved over to use the flattened-device-tree model.
fsl,has-rstcr;
};
+ l) Freescale Communications Processor Module
+
+ NOTE: This is an interim binding, and will likely change slightly,
+ as more devices are supported. The QE bindings especially are
+ incomplete.
+
+ i) Root CPM node
+
+ Properties:
+ - compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe".
+ - reg : A 48-byte region beginning with CPCR.
+
+ Example:
+ cpm@119c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+ reg = <119c0 30>;
+ }
+
+ ii) Properties common to mulitple CPM/QE devices
+
+ - fsl,cpm-command : This value is ORed with the opcode and command flag
+ to specify the device on which a CPM command operates.
+
+ - fsl,cpm-brg : Indicates which baud rate generator the device
+ is associated with. If absent, an unused BRG
+ should be dynamically allocated. If zero, the
+ device uses an external clock rather than a BRG.
+
+ - reg : Unless otherwise specified, the first resource represents the
+ scc/fcc/ucc registers, and the second represents the device's
+ parameter RAM region (if it has one).
+
+ iii) Serial
+
+ Currently defined compatibles:
+ - fsl,cpm1-smc-uart
+ - fsl,cpm2-smc-uart
+ - fsl,cpm1-scc-uart
+ - fsl,cpm2-scc-uart
+ - fsl,qe-uart
+
+ Example:
+
+ serial@11a00 {
+ device_type = "serial";
+ compatible = "fsl,mpc8272-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <11a00 20 8000 100>;
+ interrupts = <28 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <00800000>;
+ };
+
+ iii) Network
+
+ Currently defined compatibles:
+ - fsl,cpm1-scc-enet
+ - fsl,cpm2-scc-enet
+ - fsl,cpm1-fec-enet
+ - fsl,cpm2-fcc-enet (third resource is GFEMR)
+ - fsl,qe-enet
+
+ Example:
+
+ ethernet@11300 {
+ device_type = "network";
+ compatible = "fsl,mpc8272-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <11300 20 8400 100 11390 1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&PHY0>;
+ linux,network-index = <0>;
+ fsl,cpm-command = <12000300>;
+ };
+
+ iv) MDIO
+
+ Currently defined compatibles:
+ fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
+ fsl,cpm2-mdio-bitbang (reg is port C registers)
+
+ Properties for fsl,cpm2-mdio-bitbang:
+ fsl,mdio-pin : pin of port C controlling mdio data
+ fsl,mdc-pin : pin of port C controlling mdio clock
+
+ Example:
+
+ mdio@10d40 {
+ device_type = "mdio";
+ compatible = "fsl,mpc8272ads-mdio-bitbang",
+ "fsl,mpc8272-mdio-bitbang",
+ "fsl,cpm2-mdio-bitbang";
+ reg = <10d40 14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,mdio-pin = <12>;
+ fsl,mdc-pin = <13>;
+ };
+
+ v) Baud Rate Generators
+
+ Currently defined compatibles:
+ fsl,cpm-brg
+ fsl,cpm1-brg
+ fsl,cpm2-brg
+
+ Properties:
+ - reg : There may be an arbitrary number of reg resources; BRG
+ numbers are assigned to these in order.
+ - clock-frequency : Specifies the base frequency driving
+ the BRG.
+
+ Example:
+
+ brg@119f0 {
+ compatible = "fsl,mpc8272-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <119f0 10 115f0 10>;
+ clock-frequency = ;
+ };
+
+ vi) Interrupt Controllers
+
+ Currently defined compatibles:
+ - fsl,cpm1-pic
+ - only one interrupt cell
+ - fsl,pq1-pic
+ - fsl,cpm2-pic
+ - second interrupt cell is level/sense:
+ - 2 is falling edge
+ - 8 is active low
+
+ Example:
+
+ interrupt-controller@10c00 {
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <10c00 80>;
+ compatible = "mpc8272-pic", "fsl,cpm2-pic";
+ };
+
+ vii) USB (Universal Serial Bus Controller)
+
+ Properties:
+ - compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb"
+
+ Example:
+ usb@11bc0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,cpm2-usb";
+ reg = <11b60 18 8b00 100>;
+ interrupts = ;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <2e600000>;
+ };
+
+ viii) Multi-User RAM (MURAM)
+
+ The multi-user/dual-ported RAM is expressed as a bus under the CPM node.
+
+ Ranges must be set up subject to the following restrictions:
+
+ - Children's reg nodes must be offsets from the start of all muram, even
+ if the user-data area does not begin at zero.
+ - If multiple range entries are used, the difference between the parent
+ address and the child address must be the same in all, so that a single
+ mapping can cover them all while maintaining the ability to determine
+ CPM-side offsets with pointer subtraction. It is recommended that
+ multiple range entries not be used.
+ - A child address of zero must be translatable, even if no reg resources
+ contain it.
+
+ A child "data" node must exist, compatible with "fsl,cpm-muram-data", to
+ indicate the portion of muram that is usable by the OS for arbitrary
+ purposes. The data node may have an arbitrary number of reg resources,
+ all of which contribute to the allocatable muram pool.
+
+ Example, based on mpc8272:
+
+ muram@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0 2000 9800 800>;
+ };
+ };
+
+ m) Chipselect/Local Bus
+
+ Properties:
+ - name : Should be localbus
+ - #address-cells : Should be either two or three. The first cell is the
+ chipselect number, and the remaining cells are the
+ offset into the chipselect.
+ - #size-cells : Either one or two, depending on how large each chipselect
+ can be.
+ - ranges : Each range corresponds to a single chipselect, and cover
+ the entire access window as configured.
+
+ Example:
+ localbus@f0010100 {
+ compatible = "fsl,mpc8272ads-localbus",
+ "fsl,mpc8272-localbus",
+ "fsl,pq2-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = ;
+
+ ranges = <0 0 fe000000 02000000
+ 1 0 f4500000 00008000>;
+
+ flash@0,0 {
+ compatible = "jedec-flash";
+ reg = <0 0 2000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ };
+
+ board-control@1,0 {
+ reg = <1 0 20>;
+ compatible = "fsl,mpc8272ads-bcsr";
+ };
+ };
+
+
+ n) 4xx/Axon EMAC ethernet nodes
+
+ The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+ the Axon bridge. To operate this needs to interact with a ths
+ special McMAL DMA controller, and sometimes an RGMII or ZMII
+ interface. In addition to the nodes and properties described
+ below, the node for the OPB bus on which the EMAC sits must have a
+ correct clock-frequency property.
+
+ i) The EMAC node itself
+
+ Required properties:
+ - device_type : "network"
+
+ - compatible : compatible list, contains 2 entries, first is
+ "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+ 405gp, Axon) and second is either "ibm,emac" or
+ "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
+ "ibm,emac4"
+ - interrupts :
+ - interrupt-parent : optional, if needed for interrupt mapping
+ - reg :
+ - local-mac-address : 6 bytes, MAC address
+ - mal-device : phandle of the associated McMAL node
+ - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
+ with this EMAC
+ - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
+ with this EMAC
+ - cell-index : 1 cell, hardware index of the EMAC cell on a given
+ ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+ each Axon chip)
+ - max-frame-size : 1 cell, maximum frame size supported in bytes
+ - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048
+ - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048.
+ - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
+ thresholds).
+ For Axon, 0x00000010
+ - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
+ in bytes.
+ For Axon, 0x00000100 (I think ...)
+ - phy-mode : string, mode of operations of the PHY interface.
+ Supported values are: "mii", "rmii", "smii", "rgmii",
+ "tbi", "gmii", rtbi", "sgmii".
+ For Axon on CAB, it is "rgmii"
+ - mdio-device : 1 cell, required iff using shared MDIO registers
+ (440EP). phandle of the EMAC to use to drive the
+ MDIO lines for the PHY used by this EMAC.
+ - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
+ the ZMII device node
+ - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
+ channel or 0xffffffff if ZMII is only used for MDIO.
+ - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
+ of the RGMII device node.
+ For Axon: phandle of plb5/plb4/opb/rgmii
+ - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
+ RGMII channel is used by this EMAC.
+ Fox Axon: present, whatever value is appropriate for each
+ EMAC, that is the content of the current (bogus) "phy-port"
+ property.
+
+ Recommended properties:
+ - linux,network-index : This is the intended "index" of this
+ network device. This is used by the bootwrapper to interpret
+ MAC addresses passed by the firmware when no information other
+ than indices is available to associate an address with a device.
+
+ Optional properties:
+ - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
+ a search is performed.
+ - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
+ for, used if phy-address is absent. bit 0x00000001 is
+ MDIO address 0.
+ For Axon it can be absent, thouugh my current driver
+ doesn't handle phy-address yet so for now, keep
+ 0x00ffffff in it.
+ - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ rx-fifo-size). For Axon, either absent or 2048.
+ - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ tx-fifo-size). For Axon, either absent or 2048.
+ - tah-device : 1 cell, optional. If connected to a TAH engine for
+ offload, phandle of the TAH device node.
+ - tah-channel : 1 cell, optional. If appropriate, channel used on the
+ TAH engine.
+
+ Example:
+
+ EMAC0: ethernet@40000800 {
+ linux,network-index = <0>;
+ device_type = "network";
+ compatible = "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <40000800 70>;
+ local-mac-address = [00 04 AC E3 1B 1E];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000001>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ ii) McMAL node
+
+ Required properties:
+ - device_type : "dma-controller"
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+ emac) and the second is either "ibm,mcmal" or
+ "ibm,mcmal2".
+ For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+ - interrupts : .
+ For Axon: This is _different_ from the current
+ firmware. We use the "delayed" interrupts for txeob
+ and rxeob. Thus we end up with mapping those 5 MPIC
+ interrupts, all level positive sensitive: 10, 11, 32,
+ 33, 34 (in decimal)
+ - dcr-reg : < DCR registers range >
+ - dcr-parent : if needed for dcr-reg
+ - num-tx-chans : 1 cell, number of Tx channels
+ - num-rx-chans : 1 cell, number of Rx channels
+
+ iii) ZMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,zmii".
+ For Axon, there is no ZMII node.
+ - reg :
+
+ iv) RGMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,rgmii".
+ For Axon, "ibm,rgmii-axon","ibm,rgmii"
+ - reg :
+ - revision : as provided by the RGMII new version register if
+ available.
+ For Axon: 0x0000012a
+
More devices will be defined as this spec matures.
VII - Specifying interrupt information for devices
diff --git a/trunk/Documentation/rfkill.txt b/trunk/Documentation/rfkill.txt
new file mode 100644
index 000000000000..a83ff23cd68c
--- /dev/null
+++ b/trunk/Documentation/rfkill.txt
@@ -0,0 +1,89 @@
+rfkill - RF switch subsystem support
+====================================
+
+1 Implementation details
+2 Driver support
+3 Userspace support
+
+===============================================================================
+1: Implementation details
+
+The rfkill switch subsystem offers support for keys often found on laptops
+to enable wireless devices like WiFi and Bluetooth.
+
+This is done by providing the user 3 possibilities:
+ 1 - The rfkill system handles all events; userspace is not aware of events.
+ 2 - The rfkill system handles all events; userspace is informed about the events.
+ 3 - The rfkill system does not handle events; userspace handles all events.
+
+The buttons to enable and disable the wireless radios are important in
+situations where the user is for example using his laptop on a location where
+wireless radios _must_ be disabled (e.g. airplanes).
+Because of this requirement, userspace support for the keys should not be
+made mandatory. Because userspace might want to perform some additional smarter
+tasks when the key is pressed, rfkill still provides userspace the possibility
+to take over the task to handle the key events.
+
+The system inside the kernel has been split into 2 separate sections:
+ 1 - RFKILL
+ 2 - RFKILL_INPUT
+
+The first option enables rfkill support and will make sure userspace will
+be notified of any events through the input device. It also creates several
+sysfs entries which can be used by userspace. See section "Userspace support".
+
+The second option provides an rfkill input handler. This handler will
+listen to all rfkill key events and will toggle the radio accordingly.
+With this option enabled userspace could either do nothing or simply
+perform monitoring tasks.
+
+====================================
+2: Driver support
+
+To build a driver with rfkill subsystem support, the driver should
+depend on the Kconfig symbol RFKILL; it should _not_ depend on
+RKFILL_INPUT.
+
+Unless key events trigger an interrupt to which the driver listens, polling
+will be required to determine the key state changes. For this the input
+layer providers the input-polldev handler.
+
+A driver should implement a few steps to correctly make use of the
+rfkill subsystem. First for non-polling drivers:
+
+ - rfkill_allocate()
+ - input_allocate_device()
+ - rfkill_register()
+ - input_register_device()
+
+For polling drivers:
+
+ - rfkill_allocate()
+ - input_allocate_polled_device()
+ - rfkill_register()
+ - input_register_polled_device()
+
+When a key event has been detected, the correct event should be
+sent over the input device which has been registered by the driver.
+
+====================================
+3: Userspace support
+
+For each key an input device will be created which will send out the correct
+key event when the rfkill key has been pressed.
+
+The following sysfs entries will be created:
+
+ name: Name assigned by driver to this key (interface or driver name).
+ type: Name of the key type ("wlan", "bluetooth", etc).
+ state: Current state of the key. 1: On, 0: Off.
+ claim: 1: Userspace handles events, 0: Kernel handles events
+
+Both the "state" and "claim" entries are also writable. For the "state" entry
+this means that when 1 or 0 is written all radios, not yet in the requested
+state, will be will be toggled accordingly.
+For the "claim" entry writing 1 to it means that the kernel no longer handles
+key events even though RFKILL_INPUT input was enabled. When "claim" has been
+set to 0, userspace should make sure that it listens for the input events or
+check the sysfs "state" entry regularly to correctly perform the required
+tasks when the rkfill key is pressed.
diff --git a/trunk/Documentation/s390/00-INDEX b/trunk/Documentation/s390/00-INDEX
new file mode 100644
index 000000000000..3a2b96302ecc
--- /dev/null
+++ b/trunk/Documentation/s390/00-INDEX
@@ -0,0 +1,26 @@
+00-INDEX
+ - this file.
+3270.ChangeLog
+ - ChangeLog for the UTS Global 3270-support patch (outdated).
+3270.txt
+ - how to use the IBM 3270 display system support.
+cds.txt
+ - s390 common device support (common I/O layer).
+CommonIO
+ - common I/O layer command line parameters, procfs and debugfs entries
+config3270.sh
+ - example configuration for 3270 devices.
+DASD
+ - information on the DASD disk device driver.
+Debugging390.txt
+ - hints for debugging on s390 systems.
+driver-model.txt
+ - information on s390 devices and the driver model.
+monreader.txt
+ - information on accessing the z/VM monitor stream from Linux.
+s390dbf.txt
+ - information on using the s390 debug feature.
+TAPE
+ - information on the driver for channel-attached tapes.
+zfcpdump
+ - information on the s390 SCSI dump tool.
diff --git a/trunk/Documentation/s390/CommonIO b/trunk/Documentation/s390/CommonIO
index 22f82f21bc60..86320aa3fb0b 100644
--- a/trunk/Documentation/s390/CommonIO
+++ b/trunk/Documentation/s390/CommonIO
@@ -1,5 +1,5 @@
-S/390 common I/O-Layer - command line parameters and /proc entries
-==================================================================
+S/390 common I/O-Layer - command line parameters, procfs and debugfs entries
+============================================================================
Command line parameters
-----------------------
@@ -7,9 +7,9 @@ Command line parameters
* cio_msg = yes | no
Determines whether information on found devices and sensed device
- characteristics should be shown during startup, i. e. messages of the types
- "Detected device 0.0.4711 on subchannel 0.0.0042" and "SenseID: Device
- 0.0.4711 reports: ...".
+ characteristics should be shown during startup or when new devices are
+ found, i. e. messages of the types "Detected device 0.0.4711 on subchannel
+ 0.0.0042" and "SenseID: Device 0.0.4711 reports: ...".
Default is off.
@@ -26,8 +26,10 @@ Command line parameters
An ignored device can be un-ignored later; see the "/proc entries"-section for
details.
- The devices must be given either as bus ids (0.0.abcd) or as hexadecimal
- device numbers (0xabcd or abcd, for 2.4 backward compatibility).
+ The devices must be given either as bus ids (0.x.abcd) or as hexadecimal
+ device numbers (0xabcd or abcd, for 2.4 backward compatibility). If you
+ give a device number 0xabcd, it will be interpreted as 0.0.abcd.
+
You can use the 'all' keyword to ignore all devices.
The '!' operator will cause the I/O-layer to _not_ ignore a device.
The command line is parsed from left to right.
@@ -81,31 +83,36 @@ Command line parameters
will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored
devices.
- The devices can be specified either by bus id (0.0.abcd) or, for 2.4 backward
- compatibility, by the device number in hexadecimal (0xabcd or abcd).
+ The devices can be specified either by bus id (0.x.abcd) or, for 2.4 backward
+ compatibility, by the device number in hexadecimal (0xabcd or abcd). Device
+ numbers given as 0xabcd will be interpreted as 0.0.abcd.
+
+* For some of the information present in the /proc filesystem in 2.4 (namely,
+ /proc/subchannels and /proc/chpids), see driver-model.txt.
+ Information formerly in /proc/irq_count is now in /proc/interrupts.
+
+debugfs entries
+---------------
-* /proc/s390dbf/cio_*/ (S/390 debug feature)
+* /sys/kernel/debug/s390dbf/cio_*/ (S/390 debug feature)
Some views generated by the debug feature to hold various debug outputs.
- - /proc/s390dbf/cio_crw/sprintf
+ - /sys/kernel/debug/s390dbf/cio_crw/sprintf
Messages from the processing of pending channel report words (machine check
- handling), which will also show when CONFIG_DEBUG_CRW is defined.
+ handling).
- - /proc/s390dbf/cio_msg/sprintf
- Various debug messages from the common I/O-layer; generally, messages which
- will also show when CONFIG_DEBUG_IO is defined.
+ - /sys/kernel/debug/s390dbf/cio_msg/sprintf
+ Various debug messages from the common I/O-layer, including messages
+ printed when cio_msg=yes.
- - /proc/s390dbf/cio_trace/hex_ascii
+ - /sys/kernel/debug/s390dbf/cio_trace/hex_ascii
Logs the calling of functions in the common I/O-layer and, if applicable,
which subchannel they were called for, as well as dumps of some data
structures (like irb in an error case).
The level of logging can be changed to be more or less verbose by piping to
- /proc/s390dbf/cio_*/level a number between 0 and 6; see the documentation on
- the S/390 debug feature (Documentation/s390/s390dbf.txt) for details.
-
-* For some of the information present in the /proc filesystem in 2.4 (namely,
- /proc/subchannels and /proc/chpids), see driver-model.txt.
- Information formerly in /proc/irq_count is now in /proc/interrupts.
+ /sys/kernel/debug/s390dbf/cio_*/level a number between 0 and 6; see the
+ documentation on the S/390 debug feature (Documentation/s390/s390dbf.txt)
+ for details.
diff --git a/trunk/Documentation/s390/cds.txt b/trunk/Documentation/s390/cds.txt
index 58919d6a593a..3081927cc2d6 100644
--- a/trunk/Documentation/s390/cds.txt
+++ b/trunk/Documentation/s390/cds.txt
@@ -286,10 +286,10 @@ first:
timeout value
-EIO: the common I/O layer terminated the request due to an error state
-If the concurrent sense flag in the extended status word in the irb is set, the
-field irb->scsw.count describes the number of device specific sense bytes
-available in the extended control word irb->scsw.ecw[0]. No device sensing by
-the device driver itself is required.
+If the concurrent sense flag in the extended status word (esw) in the irb is
+set, the field erw.scnt in the esw describes the number of device specific
+sense bytes available in the extended control word irb->scsw.ecw[]. No device
+sensing by the device driver itself is required.
The device interrupt handler can use the following definitions to investigate
the primary unit check source coded in sense byte 0 :
diff --git a/trunk/Documentation/sysrq.txt b/trunk/Documentation/sysrq.txt
index ef19142896ca..10c8f6922ef4 100644
--- a/trunk/Documentation/sysrq.txt
+++ b/trunk/Documentation/sysrq.txt
@@ -43,7 +43,7 @@ On x86 - You press the key combo 'ALT-SysRq-'. Note - Some
keyboards may not have a key labeled 'SysRq'. The 'SysRq' key is
also known as the 'Print Screen' key. Also some keyboards cannot
handle so many keys being pressed at the same time, so you might
- have better luck with "press Alt", "press SysRq", "release Alt",
+ have better luck with "press Alt", "press SysRq", "release SysRq",
"press ", release everything.
On SPARC - You press 'ALT-STOP-', I believe.
diff --git a/trunk/Documentation/video4linux/CARDLIST.bttv b/trunk/Documentation/video4linux/CARDLIST.bttv
index 177159c5f4c4..d97cf7cc6088 100644
--- a/trunk/Documentation/video4linux/CARDLIST.bttv
+++ b/trunk/Documentation/video4linux/CARDLIST.bttv
@@ -147,3 +147,4 @@
146 -> SSAI Ultrasound Video Interface [414a:5353]
147 -> VoodooTV 200 (USA) [121a:3000]
148 -> DViCO FusionHDTV 2 [dbc0:d200]
+149 -> Typhoon TV-Tuner PCI (50684)
diff --git a/trunk/Documentation/video4linux/CARDLIST.cx23885 b/trunk/Documentation/video4linux/CARDLIST.cx23885
new file mode 100644
index 000000000000..00cb646a4bde
--- /dev/null
+++ b/trunk/Documentation/video4linux/CARDLIST.cx23885
@@ -0,0 +1,5 @@
+ 0 -> UNKNOWN/GENERIC [0070:3400]
+ 1 -> Hauppauge WinTV-HVR1800lp [0070:7600]
+ 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801]
+ 3 -> Hauppauge WinTV-HVR1250 [0070:7911]
+ 4 -> DViCO FusionHDTV5 Express [18ac:d500]
diff --git a/trunk/Documentation/video4linux/CARDLIST.saa7134 b/trunk/Documentation/video4linux/CARDLIST.saa7134
index 3f8aeab50a10..a14545300e4c 100644
--- a/trunk/Documentation/video4linux/CARDLIST.saa7134
+++ b/trunk/Documentation/video4linux/CARDLIST.saa7134
@@ -88,11 +88,11 @@
87 -> ADS Instant TV Duo Cardbus PTV331 [0331:1421]
88 -> Tevion/KWorld DVB-T 220RF [17de:7201]
89 -> ELSA EX-VISION 700TV [1048:226c]
- 90 -> Kworld ATSC110 [17de:7350]
+ 90 -> Kworld ATSC110/115 [17de:7350,17de:7352]
91 -> AVerMedia A169 B [1461:7360]
92 -> AVerMedia A169 B1 [1461:6360]
93 -> Medion 7134 Bridge #2 [16be:0005]
- 94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]
+ 94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [5168:3306,5168:3502,4e42:3502]
95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
96 -> Medion Md8800 Quadro [16be:0007,16be:0008]
97 -> LifeView FlyDVB-S /Acorp TV134DS [5168:0300,4e42:0300]
@@ -115,3 +115,4 @@
114 -> KWorld DVB-T 210 [17de:7250]
115 -> Sabrent PCMCIA TV-PCB05 [0919:2003]
116 -> 10MOONS TM300 TV Card [1131:2304]
+117 -> Avermedia Super 007 [1461:f01d]
diff --git a/trunk/Kbuild b/trunk/Kbuild
index 56b8edf6a3bc..1570d248ad92 100644
--- a/trunk/Kbuild
+++ b/trunk/Kbuild
@@ -8,11 +8,11 @@
# 1) Generate asm-offsets.h
#
-offsets-file := include/asm-$(ARCH)/asm-offsets.h
+offsets-file := include/asm-$(SRCARCH)/asm-offsets.h
always := $(offsets-file)
targets := $(offsets-file)
-targets += arch/$(ARCH)/kernel/asm-offsets.s
+targets += arch/$(SRCARCH)/kernel/asm-offsets.s
clean-files := $(addprefix $(objtree)/,$(targets))
# Default sed regexp - multiline due to syntax constraints
@@ -40,11 +40,11 @@ define cmd_offsets
endef
# We use internal kbuild rules to avoid the "is up to date" message from make
-arch/$(ARCH)/kernel/asm-offsets.s: arch/$(ARCH)/kernel/asm-offsets.c FORCE
+arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
-$(obj)/$(offsets-file): arch/$(ARCH)/kernel/asm-offsets.s Kbuild
+$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
$(Q)mkdir -p $(dir $@)
$(call cmd,offsets)
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
index 9a91d9e3f1f2..c4eca56ed5bf 100644
--- a/trunk/MAINTAINERS
+++ b/trunk/MAINTAINERS
@@ -284,6 +284,14 @@ M: corentin.labbe@geomatys.fr
L: lm-sensors@lm-sensors.org
S: Maintained
+ADM8211 WIRELESS DRIVER
+P: Michael Wu
+M: flamingice@sourmilk.net
+L: linux-wireless@vger.kernel.org
+W: http://linuxwireless.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+S: Maintained
+
ADT746X FAN DRIVER
P: Colin Leroy
M: colin@colino.net
@@ -718,34 +726,8 @@ M: rpurdie@rpsys.net
S: Maintained
BLACKFIN ARCHITECTURE
-P: Aubrey Li
-M: aubrey.li@analog.com
-P: Bernd Schmidt
-M: bernd.schmidt@analog.com
P: Bryan Wu
M: bryan.wu@analog.com
-P: Grace Pan
-M: grace.pan@analog.com
-P: Marc Hoffman
-M: marc.hoffman@analog.com
-P: Michael Hennerich
-M: michael.hennerich@analog.com
-P: Mike Frysinger
-M: michael.frysinger@analog.com
-P: Jerry Zeng
-M: jerry.zeng@analog.com
-P: Jie Zhang
-M: jie.zhang@analog.com
-P: Robin Getz
-M: robin.getz@analog.com
-P: Roy Huang
-M: roy.huang@analog.com
-P: Sonic Zhang
-M: sonic.zhang@analog.com
-P: Vivi Li
-M: vivi.li@analog.com
-P: Yi Li
-M: yi.li@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
W: http://blackfin.uclinux.org
S: Supported
@@ -787,6 +769,22 @@ L: linux-hams@vger.kernel.org
W: http://www.baycom.org/~tom/ham/ham.html
S: Maintained
+B43 WIRELESS DRIVER
+P: Michael Buesch
+M: mb@bu3sch.de
+P: Stefano Brivio
+M: st3@riseup.net
+L: linux-wireless@vger.kernel.org
+W: http://bcm43xx.berlios.de/
+S: Maintained
+
+B43LEGACY WIRELESS DRIVER
+P: Larry Finger
+M: Larry.Finger@lwfinger.net
+L: linux-wireless@vger.kernel.org
+W: http://bcm43xx.berlios.de/
+S: Maintained
+
BCM43XX WIRELESS DRIVER (SOFTMAC BASED VERSION)
P: Larry Finger
M: Larry.Finger@lwfinger.net
@@ -1250,12 +1248,6 @@ L: Eng.Linux@digi.com
W: http://www.digi.com
S: Orphaned
-DIGI RIGHTSWITCH NETWORK DRIVER
-P: Rick Richardson
-L: netdev@vger.kernel.org
-W: http://www.digi.com
-S: Orphaned
-
DIRECTORY NOTIFICATION
P: Stephen Rothwell
M: sfr@canb.auug.org.au
@@ -1543,7 +1535,7 @@ P: Pantelis Antoniou
M: pantelis.antoniou@gmail.com
P: Vitaly Bordug
M: vbordug@ru.mvista.com
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
@@ -1551,14 +1543,14 @@ FREESCALE HIGHSPEED USB DEVICE DRIVER
P: Li Yang
M: leoli@freescale.com
L: linux-usb-devel@lists.sourceforge.net
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
S: Maintained
FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
P: Li Yang
M: leoli@freescale.com
L: netdev@vger.kernel.org
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
S: Maintained
FILE LOCKING (flock() and fcntl()/lockf())
@@ -2022,16 +2014,14 @@ W: http://sourceforge.net/projects/e1000/
S: Supported
INTEL PRO/10GbE SUPPORT
-P: Jeff Kirsher
-M: jeffrey.t.kirsher@intel.com
P: Ayyappan Veeraiyan
M: ayyappan.veeraiyan@intel.com
-P: John Ronciak
-M: john.ronciak@intel.com
-P: Jesse Brandeburg
-M: jesse.brandeburg@intel.com
P: Auke Kok
M: auke-jan.h.kok@intel.com
+P: Jesse Brandeburg
+M: jesse.brandeburg@intel.com
+P: John Ronciak
+M: john.ronciak@intel.com
L: e1000-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/e1000/
S: Supported
@@ -2058,6 +2048,15 @@ L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
S: Supported
+INTEL WIRELESS WIFI LINK (iwlwifi)
+P: Zhu Yi
+M: yi.zhu@intel.com
+L: linux-wireless@vger.kernel.org
+L: ipw3945-devel@lists.sourceforge.net
+W: http://intellinuxwireless.org
+T: git git://intellinuxwireless.org/repos/iwlwifi
+S: Supported
+
IOC3 ETHERNET DRIVER
P: Ralf Baechle
M: ralf@linux-mips.org
@@ -2075,6 +2074,16 @@ P: Juanjo Ciarlante
M: jjciarla@raiz.uncu.edu.ar
S: Maintained
+IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
+P: Francois Romieu
+M: romieu@fr.zoreil.com
+P: Sorbica Shieh
+M: sorbica@icplus.com.tw
+P: Jesse Huang
+M: jesse@icplus.com.tw
+L: netdev@vger.kernel.org
+S: Maintained
+
IPATH DRIVER:
P: Arthur Jones
M: infinipath@qlogic.com
@@ -2288,38 +2297,49 @@ S: Maintained
LINUX FOR POWERPC EMBEDDED MPC52XX
P: Sylvain Munaut
M: tnt@246tNt.com
+P: Grant Likely
+M: grant.likely@secretlab.ca
W: http://www.246tNt.com/mpc52xx/
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
-L: linuxppc-embedded@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
+P: Josh Boyer
+M: jwboyer@linux.vnet.ibm.com
P: Matt Porter
M: mporter@kernel.crashing.org
W: http://www.penguinppc.org/
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
+T: git kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+S: Maintained
+
+LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
+P: Grant Likely
+M: grant.likely@secretlab.ca
+W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
+L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC BOOT CODE
P: Tom Rini
M: trini@kernel.crashing.org
W: http://www.penguinppc.org/
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
P: Marcelo Tosatti
M: marcelo@kvack.org
W: http://www.penguinppc.org/
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
P: Kumar Gala
M: galak@kernel.crashing.org
W: http://www.penguinppc.org/
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC PA SEMI PWRFICIENT
@@ -2561,12 +2581,18 @@ L: linux-kernel@vger.kernel.org
W: http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
S: Maintained
-MULTIMEDIA CARD (MMC) AND SECURE DIGITAL (SD) SUBSYSTEM
+MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
M: drzeus-mmc@drzeus.cx
L: linux-kernel@vger.kernel.org
S: Maintained
+MULTIMEDIA CARD (MMC) ETC. OVER SPI
+P: David Brownell
+M: dbrownell@users.sourceforge.net
+L: linux-kernel@vger.kernel.org
+S: Odd fixes
+
MULTISOUND SOUND DRIVER
P: Andrew Veliath
M: andrewtv@usa.net
@@ -2975,7 +3001,7 @@ POWERPC 4xx EMAC DRIVER
P: Eugene Surovegin
M: ebs@ebshome.net
W: http://kernel.ebshome.net/emac/
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
@@ -3019,6 +3045,14 @@ L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
+P54 WIRELESS DRIVER
+P: Michael Wu
+M: flamingice@sourmilk.net
+L: linux-wireless@vger.kernel.org
+W: http://prism54.org
+T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+S: Maintained
+
PRISM54 WIRELESS DRIVER
P: Luis R. Rodriguez
M: mcgrof@gmail.com
@@ -3106,6 +3140,14 @@ M: corey@world.std.com
L: linux-wireless@vger.kernel.org
S: Maintained
+RALINK RT2X00 WLAN DRIVER
+P: rt2x00 project
+L: linux-wireless@vger.kernel.org
+L: rt2400-devel@lists.sourceforge.net
+W: http://rt2x00.serialmonkey.com/
+S: Maintained
+F: drivers/net/wireless/rt2x00/
+
RANDOM NUMBER DRIVER
P: Matt Mackall
M: mpm@selenic.com
@@ -3191,8 +3233,8 @@ W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
S390 NETWORK DRIVERS
-P: Frank Pavlic
-M: fpavlic@de.ibm.com
+P: Ursula Braun
+M: ubraun@linux.vnet.ibm.com
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -3206,6 +3248,14 @@ L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
+S390 IUCV NETWORK LAYER
+P: Ursula Braun
+M: ubraun@linux.vnet.ibm.com
+M: linux390@de.ibm.com
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+
SAA7146 VIDEO4LINUX-2 DRIVER
P: Michael Hunold
M: michael@mihu.de
@@ -3430,6 +3480,12 @@ M: tsbogend@alpha.franken.de
L: netdev@vger.kernel.org
S: Maintained
+SONICS SILICON BACKPLANE DRIVER (SSB)
+P: Michael Buesch
+M: mb@bu3sch.de
+L: netdev@vger.kernel.org
+S: Maintained
+
SONY VAIO CONTROL DEVICE DRIVER
P: Mattia Dongili
M: malattia@linux.it
@@ -3614,6 +3670,14 @@ M: hlhung3i@gmail.com
W: http://tcp-lp-mod.sourceforge.net/
S: Maintained
+TEHUTI ETHERNET DRIVER
+P: Alexander Indenbaum
+M: baum@tehutinetworks.net
+P: Andy Gospodarek
+M: andy@greyhouse.net
+L: netdev@vger.kernel.org
+S: Supported
+
TI FLASH MEDIA INTERFACE DRIVER
P: Alex Dubov
M: oakad@yahoo.com
@@ -4176,6 +4240,13 @@ W: http://oss.sgi.com/projects/xfs
T: git git://oss.sgi.com:8090/xfs/xfs-2.6.git
S: Supported
+XILINX SYSTEMACE DRIVER
+P: Grant Likely
+M: grant.likely@secretlab.ca
+W: http://www.secretlab.ca/
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
XILINX UARTLITE SERIAL DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
diff --git a/trunk/Makefile b/trunk/Makefile
index 6fc97bfea36c..1274084c9090 100644
--- a/trunk/Makefile
+++ b/trunk/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 23
-EXTRAVERSION =-rc9
+EXTRAVERSION =
NAME = Arr Matey! A Hairy Bilge Rat!
# *DOCUMENTATION*
@@ -186,7 +186,8 @@ ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
# Architecture as present in compile.h
-UTS_MACHINE := $(ARCH)
+UTS_MACHINE := $(ARCH)
+SRCARCH := $(ARCH)
KCONFIG_CONFIG ?= .config
@@ -322,7 +323,7 @@ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
-export ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
@@ -609,7 +610,7 @@ libs-y := $(libs-y1) $(libs-y2)
vmlinux-init := $(head-y) $(init-y)
vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
vmlinux-all := $(vmlinux-init) $(vmlinux-main)
-vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds
+vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
# Rule to link vmlinux - also used during CONFIG_KALLSYMS
@@ -862,7 +863,7 @@ ifneq ($(KBUILD_SRC),)
/bin/false; \
fi;
$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
- $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
+ $(Q)ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm
endif
# prepare2 creates a makefile if using a separate output directory
@@ -894,9 +895,9 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
# before switching between archs anyway.
include/asm:
- @echo ' SYMLINK $@ -> include/asm-$(ARCH)'
+ @echo ' SYMLINK $@ -> include/asm-$(SRCARCH)'
$(Q)if [ ! -d include ]; then mkdir -p include; fi;
- @ln -fsn asm-$(ARCH) $@
+ @ln -fsn asm-$(SRCARCH) $@
# Generate some files
# ---------------------------------------------------------------------------
@@ -936,7 +937,8 @@ depend dep:
INSTALL_HDR_PATH=$(objtree)/usr
export INSTALL_HDR_PATH
-HDRARCHES=$(filter-out generic,$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
+HDRFILTER=generic i386 x86_64
+HDRARCHES=$(filter-out $(HDRFILTER),$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
PHONY += headers_install_all
headers_install_all: include/linux/version.h scripts_basic FORCE
@@ -947,11 +949,11 @@ headers_install_all: include/linux/version.h scripts_basic FORCE
PHONY += headers_install
headers_install: include/linux/version.h scripts_basic FORCE
- @if [ ! -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
- echo '*** Error: Headers not exportable for this architecture ($(ARCH))'; \
+ @if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
+ echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \
exit 1 ; fi
$(Q)$(MAKE) $(build)=scripts scripts/unifdef
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include
PHONY += headers_check_all
headers_check_all: headers_install_all
@@ -961,7 +963,7 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include HDRCHECK=1
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include HDRCHECK=1
# ---------------------------------------------------------------------------
# Modules
@@ -1139,7 +1141,7 @@ help:
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@echo ' kernelversion - Output the version stored in Makefile'
- @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+ @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
echo ' (default: $(INSTALL_HDR_PATH))'; \
fi
@@ -1147,7 +1149,7 @@ help:
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
- @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+ @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
echo ' headers_check - Sanity check on exported headers'; \
fi
@echo ''
@@ -1292,18 +1294,23 @@ ifeq ($(ALLSOURCE_ARCHS),)
ifeq ($(ARCH),um)
ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
else
-ALLINCLUDE_ARCHS := $(ARCH)
+ALLINCLUDE_ARCHS := $(SRCARCH)
endif
else
#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif
+# Take care of arch/x86
+ifeq ($(ARCH), $(SRCARCH))
ALLSOURCE_ARCHS := $(ARCH)
+else
+ALLSOURCE_ARCHS := $(ARCH) $(SRCARCH)
+endif
define find-sources
( for ARCH in $(ALLSOURCE_ARCHS) ; do \
- find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+ find $(__srctree)arch/$${SRCARCH} $(RCS_FIND_IGNORE) \
-name $1 -print; \
done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
@@ -1312,7 +1319,7 @@ define find-sources
\( -name config -o -name 'asm-*' \) -prune \
-o -name $1 -print; \
for ARCH in $(ALLINCLUDE_ARCHS) ; do \
- find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+ find $(__srctree)include/asm-$${SRCARCH} $(RCS_FIND_IGNORE) \
-name $1 -print; \
done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
diff --git a/trunk/arch/arm/mach-imx/mx1ads.c b/trunk/arch/arm/mach-imx/mx1ads.c
index da893c80d471..a9778c1587ab 100644
--- a/trunk/arch/arm/mach-imx/mx1ads.c
+++ b/trunk/arch/arm/mach-imx/mx1ads.c
@@ -116,7 +116,7 @@ static struct platform_device *devices[] __initdata = {
};
#ifdef CONFIG_MMC_IMX
-static int mx1ads_mmc_card_present(void)
+static int mx1ads_mmc_card_present(struct device *dev)
{
/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
return (SSR(1) & (1 << 20) ? 0 : 1);
diff --git a/trunk/arch/arm/mach-pxa/corgi.c b/trunk/arch/arm/mach-pxa/corgi.c
index aab27297b3c6..2363cc64fe07 100644
--- a/trunk/arch/arm/mach-pxa/corgi.c
+++ b/trunk/arch/arm/mach-pxa/corgi.c
@@ -20,6 +20,7 @@
#include
#include
#include
+#include
#include
#include
@@ -142,15 +143,28 @@ struct corgissp_machinfo corgi_ssp_machinfo = {
/*
* Corgi Backlight Device
*/
-static struct corgibl_machinfo corgi_bl_machinfo = {
+static void corgi_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct generic_bl_info corgi_bl_machinfo = {
+ .name = "corgi-bl",
.max_intensity = 0x2f,
.default_intensity = 0x1f,
.limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
+ .kick_battery = corgi_bl_kick_battery,
};
static struct platform_device corgibl_device = {
- .name = "corgi-bl",
+ .name = "generic-bl",
.dev = {
.parent = &corgifb_device.dev,
.platform_data = &corgi_bl_machinfo,
diff --git a/trunk/arch/arm/mach-pxa/spitz.c b/trunk/arch/arm/mach-pxa/spitz.c
index bae47e145de8..2d78199d24af 100644
--- a/trunk/arch/arm/mach-pxa/spitz.c
+++ b/trunk/arch/arm/mach-pxa/spitz.c
@@ -21,6 +21,7 @@
#include
#include
#include
+#include
#include
#include
@@ -222,14 +223,27 @@ struct corgissp_machinfo spitz_ssp_machinfo = {
/*
* Spitz Backlight Device
*/
-static struct corgibl_machinfo spitz_bl_machinfo = {
+static void spitz_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct generic_bl_info spitz_bl_machinfo = {
+ .name = "corgi-bl",
.default_intensity = 0x1f,
.limit_mask = 0x0b,
.max_intensity = 0x2f,
+ .kick_battery = spitz_bl_kick_battery,
};
static struct platform_device spitzbl_device = {
- .name = "corgi-bl",
+ .name = "generic-bl",
.dev = {
.platform_data = &spitz_bl_machinfo,
},
diff --git a/trunk/arch/arm/mach-s3c2440/mach-osiris.c b/trunk/arch/arm/mach-s3c2440/mach-osiris.c
index 0ba7e9060c7b..c326983f4a8f 100644
--- a/trunk/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/trunk/arch/arm/mach-s3c2440/mach-osiris.c
@@ -276,7 +276,21 @@ static unsigned char pm_osiris_ctrl0;
static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
{
+ unsigned int tmp;
+
pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
+
+ /* ensure correct NAND slot is selected on resume */
+ if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
+ tmp |= 2;
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+
+ /* ensure that an nRESET is not generated on resume. */
+ s3c2410_gpio_setpin(S3C2410_GPA21, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+
return 0;
}
@@ -285,6 +299,10 @@ static int osiris_pm_resume(struct sys_device *sd)
if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
+ __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
+
+ s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+
return 0;
}
diff --git a/trunk/arch/avr32/boards/atngw100/flash.c b/trunk/arch/avr32/boards/atngw100/flash.c
index f9b32a8eab9b..b07ae63aa548 100644
--- a/trunk/arch/avr32/boards/atngw100/flash.c
+++ b/trunk/arch/avr32/boards/atngw100/flash.c
@@ -15,7 +15,7 @@
#include
-static struct smc_config flash_config __initdata = {
+static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
.nrd_setup = 40,
.ncs_write_setup = 0,
@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
.read_cycle = 120,
.write_cycle = 120,
+};
+static struct smc_config flash_config __initdata = {
.bus_width = 2,
.nrd_controlled = 1,
.nwe_controlled = 1,
@@ -82,6 +84,7 @@ static int __init atngw100_flash_init(void)
{
int ret;
+ smc_set_timing(&flash_config, &flash_timing);
ret = smc_set_configuration(0, &flash_config);
if (ret < 0) {
printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
diff --git a/trunk/arch/avr32/boards/atngw100/setup.c b/trunk/arch/avr32/boards/atngw100/setup.c
index ef801563bbf5..52987c81d668 100644
--- a/trunk/arch/avr32/boards/atngw100/setup.c
+++ b/trunk/arch/avr32/boards/atngw100/setup.c
@@ -125,8 +125,11 @@ static struct platform_device ngw_gpio_leds = {
};
static struct i2c_gpio_platform_data i2c_gpio_data = {
- .sda_pin = GPIO_PIN_PA(6),
- .scl_pin = GPIO_PIN_PA(7),
+ .sda_pin = GPIO_PIN_PA(6),
+ .scl_pin = GPIO_PIN_PA(7),
+ .sda_is_open_drain = 1,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* close to 100 kHz */
};
static struct platform_device i2c_gpio_device = {
@@ -154,6 +157,7 @@ static int __init atngw100_init(void)
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ at32_add_device_usba(0, NULL);
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
at32_select_gpio(ngw_leds[i].gpio,
@@ -161,8 +165,10 @@ static int __init atngw100_init(void)
}
platform_device_register(&ngw_gpio_leds);
- at32_select_gpio(i2c_gpio_data.sda_pin, 0);
- at32_select_gpio(i2c_gpio_data.scl_pin, 0);
+ at32_select_gpio(i2c_gpio_data.sda_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(i2c_gpio_data.scl_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
platform_device_register(&i2c_gpio_device);
return 0;
diff --git a/trunk/arch/avr32/boards/atstk1000/atstk1002.c b/trunk/arch/avr32/boards/atstk1000/atstk1002.c
index c9981b731efa..6b9e466104ad 100644
--- a/trunk/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/trunk/arch/avr32/boards/atstk1000/atstk1002.c
@@ -241,6 +241,7 @@ static int __init atstk1002_init(void)
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size);
#endif
+ at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX);
#endif
diff --git a/trunk/arch/avr32/boards/atstk1000/flash.c b/trunk/arch/avr32/boards/atstk1000/flash.c
index aac4300cca12..3d0a102ad45e 100644
--- a/trunk/arch/avr32/boards/atstk1000/flash.c
+++ b/trunk/arch/avr32/boards/atstk1000/flash.c
@@ -15,7 +15,7 @@
#include
-static struct smc_config flash_config __initdata = {
+static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
.nrd_setup = 40,
.ncs_write_setup = 0,
@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
.read_cycle = 120,
.write_cycle = 120,
+};
+static struct smc_config flash_config __initdata = {
.bus_width = 2,
.nrd_controlled = 1,
.nwe_controlled = 1,
@@ -82,6 +84,7 @@ static int __init atstk1000_flash_init(void)
{
int ret;
+ smc_set_timing(&flash_config, &flash_timing);
ret = smc_set_configuration(0, &flash_config);
if (ret < 0) {
printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
diff --git a/trunk/arch/avr32/kernel/Makefile b/trunk/arch/avr32/kernel/Makefile
index 90e5afff54a2..989fcd1fef7e 100644
--- a/trunk/arch/avr32/kernel/Makefile
+++ b/trunk/arch/avr32/kernel/Makefile
@@ -11,8 +11,3 @@ obj-y += signal.o sys_avr32.o process.o time.o
obj-y += init_task.o switch_to.o cpu.o
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
obj-$(CONFIG_KPROBES) += kprobes.o
-
-USE_STANDARD_AS_RULE := true
-
-%.lds: %.lds.c FORCE
- $(call if_changed_dep,cpp_lds_S)
diff --git a/trunk/arch/avr32/kernel/entry-avr32b.S b/trunk/arch/avr32/kernel/entry-avr32b.S
index 42657f1703b2..ccadfd9b438d 100644
--- a/trunk/arch/avr32/kernel/entry-avr32b.S
+++ b/trunk/arch/avr32/kernel/entry-avr32b.S
@@ -159,11 +159,18 @@ handle_vmalloc_miss:
.section .scall.text,"ax",@progbits
system_call:
+#ifdef CONFIG_PREEMPT
+ mask_interrupts
+#endif
pushm r12 /* r12_orig */
stmts --sp, r0-lr
- zero_fp
+
mfsr r0, SYSREG_RAR_SUP
mfsr r1, SYSREG_RSR_SUP
+#ifdef CONFIG_PREEMPT
+ unmask_interrupts
+#endif
+ zero_fp
stm --sp, r0-r1
/* check for syscall tracing */
@@ -638,6 +645,13 @@ irq_level\level:
stmts --sp,r0-lr
mfsr r8, rar_int\level
mfsr r9, rsr_int\level
+
+#ifdef CONFIG_PREEMPT
+ sub r11, pc, (. - system_call)
+ cp.w r11, r8
+ breq 4f
+#endif
+
pushm r8-r9
mov r11, sp
@@ -668,6 +682,16 @@ irq_level\level:
sub sp, -4 /* ignore r12_orig */
rete
+#ifdef CONFIG_PREEMPT
+4: mask_interrupts
+ mfsr r8, rsr_int\level
+ sbr r8, 16
+ mtsr rsr_int\level, r8
+ ldmts sp++, r0-lr
+ sub sp, -4 /* ignore r12_orig */
+ rete
+#endif
+
2: get_thread_info r0
ld.w r1, r0[TI_flags]
bld r1, TIF_CPU_GOING_TO_SLEEP
diff --git a/trunk/arch/avr32/kernel/setup.c b/trunk/arch/avr32/kernel/setup.c
index d08b0bc6b2bb..4b4c1884e1c5 100644
--- a/trunk/arch/avr32/kernel/setup.c
+++ b/trunk/arch/avr32/kernel/setup.c
@@ -248,7 +248,7 @@ static int __init early_parse_fbmem(char *p)
fbmem_size = memparse(p, &p);
if (*p == '@') {
- fbmem_start = memparse(p, &p);
+ fbmem_start = memparse(p + 1, &p);
ret = add_reserved_region(fbmem_start,
fbmem_start + fbmem_size - 1,
"Framebuffer");
diff --git a/trunk/arch/avr32/kernel/vmlinux.lds.c b/trunk/arch/avr32/kernel/vmlinux.lds.S
similarity index 95%
rename from trunk/arch/avr32/kernel/vmlinux.lds.c
rename to trunk/arch/avr32/kernel/vmlinux.lds.S
index db0438f35c00..ce9ac9659883 100644
--- a/trunk/arch/avr32/kernel/vmlinux.lds.c
+++ b/trunk/arch/avr32/kernel/vmlinux.lds.S
@@ -9,6 +9,8 @@
*/
#define LOAD_OFFSET 0x00000000
#include
+#include
+#include
OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
OUTPUT_ARCH(avr32)
@@ -58,11 +60,10 @@ SECTIONS
*(.init.ramfs)
__initramfs_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
}
- . = ALIGN(8192);
.text : AT(ADDR(.text) - LOAD_OFFSET) {
_evba = .;
_text = .;
@@ -96,7 +97,7 @@ SECTIONS
RODATA
- . = ALIGN(8192);
+ . = ALIGN(THREAD_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
_data = .;
@@ -107,7 +108,7 @@ SECTIONS
*(.data.init_task)
/* Then, the cacheline aligned data */
- . = ALIGN(32);
+ . = ALIGN(L1_CACHE_BYTES);
*(.data.cacheline_aligned)
/* And the rest... */
diff --git a/trunk/arch/avr32/mach-at32ap/at32ap7000.c b/trunk/arch/avr32/mach-at32ap/at32ap7000.c
index 64cc5583ddfb..f6d154ca4d24 100644
--- a/trunk/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/trunk/arch/avr32/mach-at32ap/at32ap7000.c
@@ -25,12 +25,6 @@
#include "pio.h"
#include "pm.h"
-/*
- * We can reduce the code size a bit by using a constant here. Since
- * this file is completely chip-specific, it's safe to not use
- * ioremap. Generic drivers should of course never do this.
- */
-#define AT32_PM_BASE 0xfff00000
#define PBMEM(base) \
{ \
@@ -1167,6 +1161,72 @@ at32_add_device_ssc(unsigned int id, unsigned int flags)
return pdev;
}
+/* --------------------------------------------------------------------
+ * USB Device Controller
+ * -------------------------------------------------------------------- */
+static struct resource usba0_resource[] __initdata = {
+ {
+ .start = 0xff300000,
+ .end = 0xff3fffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0xfff03000,
+ .end = 0xfff033ff,
+ .flags = IORESOURCE_MEM,
+ },
+ IRQ(31),
+};
+static struct clk usba0_pclk = {
+ .name = "pclk",
+ .parent = &pbb_clk,
+ .mode = pbb_clk_mode,
+ .get_rate = pbb_clk_get_rate,
+ .index = 12,
+};
+static struct clk usba0_hclk = {
+ .name = "hclk",
+ .parent = &hsb_clk,
+ .mode = hsb_clk_mode,
+ .get_rate = hsb_clk_get_rate,
+ .index = 6,
+};
+
+struct platform_device *__init
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+{
+ struct platform_device *pdev;
+
+ if (id != 0)
+ return NULL;
+
+ pdev = platform_device_alloc("atmel_usba_udc", 0);
+ if (!pdev)
+ return NULL;
+
+ if (platform_device_add_resources(pdev, usba0_resource,
+ ARRAY_SIZE(usba0_resource)))
+ goto out_free_pdev;
+
+ if (data) {
+ if (platform_device_add_data(pdev, data, sizeof(*data)))
+ goto out_free_pdev;
+
+ if (data->vbus_pin != GPIO_PIN_NONE)
+ at32_select_gpio(data->vbus_pin, 0);
+ }
+
+ usba0_pclk.dev = &pdev->dev;
+ usba0_hclk.dev = &pdev->dev;
+
+ platform_device_add(pdev);
+
+ return pdev;
+
+out_free_pdev:
+ platform_device_put(pdev);
+ return NULL;
+}
+
/* --------------------------------------------------------------------
* GCLK
* -------------------------------------------------------------------- */
@@ -1252,6 +1312,8 @@ struct clk *at32_clock_list[] = {
&ssc0_pclk,
&ssc1_pclk,
&ssc2_pclk,
+ &usba0_hclk,
+ &usba0_pclk,
&gclk0,
&gclk1,
&gclk2,
diff --git a/trunk/arch/avr32/mach-at32ap/clock.c b/trunk/arch/avr32/mach-at32ap/clock.c
index 0f8c89c9f832..4642117cc9ab 100644
--- a/trunk/arch/avr32/mach-at32ap/clock.c
+++ b/trunk/arch/avr32/mach-at32ap/clock.c
@@ -150,3 +150,119 @@ struct clk *clk_get_parent(struct clk *clk)
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
+
+
+
+#ifdef CONFIG_DEBUG_FS
+
+/* /sys/kernel/debug/at32ap_clk */
+
+#include
+#include
+#include
+#include "pm.h"
+
+
+#define NEST_DELTA 2
+#define NEST_MAX 6
+
+struct clkinf {
+ struct seq_file *s;
+ unsigned nest;
+};
+
+static void
+dump_clock(struct clk *parent, struct clkinf *r)
+{
+ unsigned nest = r->nest;
+ char buf[16 + NEST_MAX];
+ struct clk *clk;
+ unsigned i;
+
+ /* skip clocks coupled to devices that aren't registered */
+ if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
+ return;
+
+ /* name */
+ memset(buf, ' ', sizeof(buf) - 1);
+ buf[sizeof(buf) - 1] = 0;
+ i = strlen(parent->name);
+ memcpy(buf + nest, parent->name,
+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+ seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz",
+ buf, parent->set_parent ? '*' : ' ',
+ parent->users,
+ parent->users ? "on" : "off", /* NOTE: not-paranoid!! */
+ clk_get_rate(parent));
+ if (parent->dev)
+ seq_printf(r->s, ", for %s", parent->dev->bus_id);
+ seq_printf(r->s, "\n");
+
+ /* cost of this scan is small, but not linear... */
+ r->nest = nest + NEST_DELTA;
+ for (i = 3; i < at32_nr_clocks; i++) {
+ clk = at32_clock_list[i];
+ if (clk->parent == parent)
+ dump_clock(clk, r);
+ }
+ r->nest = nest;
+}
+
+static int clk_show(struct seq_file *s, void *unused)
+{
+ struct clkinf r;
+ int i;
+
+ /* show all the power manager registers */
+ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
+ seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
+ seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
+ for (i = 0; i < 8; i++) {
+ if (i == 5)
+ continue;
+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
+ }
+
+ seq_printf(s, "\n");
+
+ /* show clock tree as derived from the three oscillators
+ * we "know" are at the head of the list
+ */
+ r.s = s;
+ r.nest = 0;
+ dump_clock(at32_clock_list[0], &r);
+ dump_clock(at32_clock_list[1], &r);
+ dump_clock(at32_clock_list[2], &r);
+
+ return 0;
+}
+
+static int clk_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_show, NULL);
+}
+
+static const struct file_operations clk_operations = {
+ .open = clk_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init clk_debugfs_init(void)
+{
+ (void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO,
+ NULL, NULL, &clk_operations);
+
+ return 0;
+}
+postcore_initcall(clk_debugfs_init);
+
+#endif
diff --git a/trunk/arch/avr32/mach-at32ap/hsmc.c b/trunk/arch/avr32/mach-at32ap/hsmc.c
index 5e22a750632b..704607fbcc69 100644
--- a/trunk/arch/avr32/mach-at32ap/hsmc.c
+++ b/trunk/arch/avr32/mach-at32ap/hsmc.c
@@ -29,16 +29,25 @@ struct hsmc {
static struct hsmc *hsmc;
-int smc_set_configuration(int cs, const struct smc_config *config)
+void smc_set_timing(struct smc_config *config,
+ const struct smc_timing *timing)
{
+ int recover;
+ int cycle;
+
unsigned long mul;
- unsigned long offset;
- u32 setup, pulse, cycle, mode;
- if (!hsmc)
- return -ENODEV;
- if (cs >= NR_CHIP_SELECTS)
- return -EINVAL;
+ /* Reset all SMC timings */
+ config->ncs_read_setup = 0;
+ config->nrd_setup = 0;
+ config->ncs_write_setup = 0;
+ config->nwe_setup = 0;
+ config->ncs_read_pulse = 0;
+ config->nrd_pulse = 0;
+ config->ncs_write_pulse = 0;
+ config->nwe_pulse = 0;
+ config->read_cycle = 0;
+ config->write_cycle = 0;
/*
* cycles = x / T = x * f
@@ -50,16 +59,102 @@ int smc_set_configuration(int cs, const struct smc_config *config)
#define ns2cyc(x) ((((x) * mul) + 65535) >> 16)
- setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup))
- | HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup))
- | HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup))
- | HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup)));
- pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse))
- | HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse))
- | HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse))
- | HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse)));
- cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle))
- | HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle)));
+ if (timing->ncs_read_setup > 0)
+ config->ncs_read_setup = ns2cyc(timing->ncs_read_setup);
+
+ if (timing->nrd_setup > 0)
+ config->nrd_setup = ns2cyc(timing->nrd_setup);
+
+ if (timing->ncs_write_setup > 0)
+ config->ncs_write_setup = ns2cyc(timing->ncs_write_setup);
+
+ if (timing->nwe_setup > 0)
+ config->nwe_setup = ns2cyc(timing->nwe_setup);
+
+ if (timing->ncs_read_pulse > 0)
+ config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse);
+
+ if (timing->nrd_pulse > 0)
+ config->nrd_pulse = ns2cyc(timing->nrd_pulse);
+
+ if (timing->ncs_write_pulse > 0)
+ config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse);
+
+ if (timing->nwe_pulse > 0)
+ config->nwe_pulse = ns2cyc(timing->nwe_pulse);
+
+ if (timing->read_cycle > 0)
+ config->read_cycle = ns2cyc(timing->read_cycle);
+
+ if (timing->write_cycle > 0)
+ config->write_cycle = ns2cyc(timing->write_cycle);
+
+ /* Extend read cycle in needed */
+ if (timing->ncs_read_recover > 0)
+ recover = ns2cyc(timing->ncs_read_recover);
+ else
+ recover = 1;
+
+ cycle = config->ncs_read_setup + config->ncs_read_pulse + recover;
+
+ if (config->read_cycle < cycle)
+ config->read_cycle = cycle;
+
+ /* Extend read cycle in needed */
+ if (timing->nrd_recover > 0)
+ recover = ns2cyc(timing->nrd_recover);
+ else
+ recover = 1;
+
+ cycle = config->nrd_setup + config->nrd_pulse + recover;
+
+ if (config->read_cycle < cycle)
+ config->read_cycle = cycle;
+
+ /* Extend write cycle in needed */
+ if (timing->ncs_write_recover > 0)
+ recover = ns2cyc(timing->ncs_write_recover);
+ else
+ recover = 1;
+
+ cycle = config->ncs_write_setup + config->ncs_write_pulse + recover;
+
+ if (config->write_cycle < cycle)
+ config->write_cycle = cycle;
+
+ /* Extend write cycle in needed */
+ if (timing->nwe_recover > 0)
+ recover = ns2cyc(timing->nwe_recover);
+ else
+ recover = 1;
+
+ cycle = config->nwe_setup + config->nwe_pulse + recover;
+
+ if (config->write_cycle < cycle)
+ config->write_cycle = cycle;
+}
+EXPORT_SYMBOL(smc_set_timing);
+
+int smc_set_configuration(int cs, const struct smc_config *config)
+{
+ unsigned long offset;
+ u32 setup, pulse, cycle, mode;
+
+ if (!hsmc)
+ return -ENODEV;
+ if (cs >= NR_CHIP_SELECTS)
+ return -EINVAL;
+
+ setup = (HSMC_BF(NWE_SETUP, config->nwe_setup)
+ | HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup)
+ | HSMC_BF(NRD_SETUP, config->nrd_setup)
+ | HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup));
+ pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse)
+ | HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse)
+ | HSMC_BF(NRD_PULSE, config->nrd_pulse)
+ | HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse));
+ cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle)
+ | HSMC_BF(NRD_CYCLE, config->read_cycle));
switch (config->bus_width) {
case 1:
diff --git a/trunk/arch/avr32/mach-at32ap/pio.c b/trunk/arch/avr32/mach-at32ap/pio.c
index 1eb99b814f5b..d61a02da898c 100644
--- a/trunk/arch/avr32/mach-at32ap/pio.c
+++ b/trunk/arch/avr32/mach-at32ap/pio.c
@@ -110,6 +110,10 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags)
pio_writel(pio, SODR, mask);
else
pio_writel(pio, CODR, mask);
+ if (flags & AT32_GPIOF_MULTIDRV)
+ pio_writel(pio, MDER, mask);
+ else
+ pio_writel(pio, MDDR, mask);
pio_writel(pio, PUDR, mask);
pio_writel(pio, OER, mask);
} else {
diff --git a/trunk/arch/avr32/mach-at32ap/pm.h b/trunk/arch/avr32/mach-at32ap/pm.h
index a1f8aced0a8c..47efd0d1951f 100644
--- a/trunk/arch/avr32/mach-at32ap/pm.h
+++ b/trunk/arch/avr32/mach-at32ap/pm.h
@@ -4,6 +4,14 @@
#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
#define __ARCH_AVR32_MACH_AT32AP_PM_H__
+/*
+ * We can reduce the code size a bit by using a constant here. Since
+ * this file is only used on AVR32 AP CPUs with segmentation enabled,
+ * it's safe to not use ioremap. Generic drivers should of course
+ * never do this.
+ */
+#define AT32_PM_BASE 0xfff00000
+
/* PM register offsets */
#define PM_MCCTRL 0x0000
#define PM_CKSEL 0x0004
diff --git a/trunk/arch/avr32/mm/init.c b/trunk/arch/avr32/mm/init.c
index 82cf70854b90..480760bde63f 100644
--- a/trunk/arch/avr32/mm/init.c
+++ b/trunk/arch/avr32/mm/init.c
@@ -224,19 +224,9 @@ void free_initmem(void)
#ifdef CONFIG_BLK_DEV_INITRD
-static int keep_initrd;
-
void free_initrd_mem(unsigned long start, unsigned long end)
{
- if (!keep_initrd)
- free_area(start, end, "initrd");
-}
-
-static int __init keepinitrd_setup(char *__unused)
-{
- keep_initrd = 1;
- return 1;
+ free_area(start, end, "initrd");
}
-__setup("keepinitrd", keepinitrd_setup);
#endif
diff --git a/trunk/arch/blackfin/Kconfig b/trunk/arch/blackfin/Kconfig
index 017defaa525b..b24f4535ffe0 100644
--- a/trunk/arch/blackfin/Kconfig
+++ b/trunk/arch/blackfin/Kconfig
@@ -57,7 +57,7 @@ config GENERIC_TIME
bool
default n
-config GENERIC_CALIBRATE_DELAY
+config GENERIC_GPIO
bool
default y
@@ -323,7 +323,7 @@ config CMDLINE
to the kernel, you may specify one here. As a minimum, you should specify
the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
-comment "Board Setup"
+comment "Clock/PLL Setup"
config CLKIN_HZ
int "Crystal Frequency in Hz"
@@ -335,6 +335,118 @@ config CLKIN_HZ
help
The frequency of CLKIN crystal oscillator on the board in Hz.
+config BFIN_KERNEL_CLOCK
+ bool "Re-program Clocks while Kernel boots?"
+ default n
+ help
+ This option decides if kernel clocks are re-programed from the
+ bootloader settings. If the clocks are not set, the SDRAM settings
+ are also not changed, and the Bootloader does 100% of the hardware
+ configuration.
+
+config PLL_BYPASS
+ bool "Bypass PLL"
+ depends on BFIN_KERNEL_CLOCK
+ default n
+
+config CLKIN_HALF
+ bool "Half Clock In"
+ depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
+ default n
+ help
+ If this is set the clock will be divided by 2, before it goes to the PLL.
+
+config VCO_MULT
+ int "VCO Multiplier"
+ depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
+ range 1 64
+ default "22" if BFIN533_EZKIT
+ default "45" if BFIN533_STAMP
+ default "20" if BFIN537_STAMP
+ default "22" if BFIN533_BLUETECHNIX_CM
+ default "20" if BFIN537_BLUETECHNIX_CM
+ default "20" if BFIN561_BLUETECHNIX_CM
+ default "20" if BFIN561_EZKIT
+ help
+ This controls the frequency of the on-chip PLL. This can be between 1 and 64.
+ PLL Frequency = (Crystal Frequency) * (this setting)
+
+choice
+ prompt "Core Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ default CCLK_DIV_1
+ help
+ This sets the frequency of the core. It can be 1, 2, 4 or 8
+ Core Frequency = (PLL frequency) / (this setting)
+
+config CCLK_DIV_1
+ bool "1"
+
+config CCLK_DIV_2
+ bool "2"
+
+config CCLK_DIV_4
+ bool "4"
+
+config CCLK_DIV_8
+ bool "8"
+endchoice
+
+config SCLK_DIV
+ int "System Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ range 1 15
+ default 5 if BFIN533_EZKIT
+ default 5 if BFIN533_STAMP
+ default 4 if BFIN537_STAMP
+ default 5 if BFIN533_BLUETECHNIX_CM
+ default 4 if BFIN537_BLUETECHNIX_CM
+ default 4 if BFIN561_BLUETECHNIX_CM
+ default 5 if BFIN561_EZKIT
+ help
+ This sets the frequency of the system clock (including SDRAM or DDR).
+ This can be between 1 and 15
+ System Clock = (PLL frequency) / (this setting)
+
+#
+# Max & Min Speeds for various Chips
+#
+config MAX_VCO_HZ
+ int
+ default 600000000 if BF522
+ default 600000000 if BF525
+ default 600000000 if BF527
+ default 400000000 if BF531
+ default 400000000 if BF532
+ default 750000000 if BF533
+ default 500000000 if BF534
+ default 400000000 if BF536
+ default 600000000 if BF537
+ default 533000000 if BF538
+ default 533000000 if BF539
+ default 600000000 if BF542
+ default 533000000 if BF544
+ default 533000000 if BF549
+ default 600000000 if BF561
+
+config MIN_VCO_HZ
+ int
+ default 50000000
+
+config MAX_SCLK_HZ
+ int
+ default 133000000
+
+config MIN_SCLK_HZ
+ int
+ default 27000000
+
+comment "Kernel Timer/Scheduler"
+
+source kernel/Kconfig.hz
+
+comment "Memory Setup"
+
config MEM_SIZE
int "SDRAM Memory Size in MBytes"
default 32 if BFIN533_EZKIT
@@ -364,15 +476,16 @@ config ENET_FLASH_PIN
config BOOT_LOAD
hex "Kernel load address for booting"
default "0x1000"
+ range 0x1000 0x20000000
help
This option allows you to set the load address of the kernel.
This can be useful if you are on a board which has a small amount
of memory or you wish to reserve some memory at the beginning of
the address space.
- Note that you generally want to keep this value at or above 4k
- (0x1000) as this will allow the kernel to capture NULL pointer
- references.
+ Note that you need to keep this value above 4k (0x1000) as this
+ memory region is used to capture NULL pointer references as well
+ as some core kernel functions.
comment "LED Status Indicators"
depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
@@ -408,6 +521,52 @@ config BFIN_IDLE_LED_NUM
help
Select the LED (marked on the board) for you to blink.
+choice
+ prompt "Blackfin Exception Scratch Register"
+ default BFIN_SCRATCH_REG_RETN
+ help
+ Select the resource to reserve for the Exception handler:
+ - RETN: Non-Maskable Interrupt (NMI)
+ - RETE: Exception Return (JTAG/ICE)
+ - CYCLES: Performance counter
+
+ If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_RETN
+ bool "RETN"
+ help
+ Use the RETN register in the Blackfin exception handler
+ as a stack scratch register. This means you cannot
+ safely use NMI on the Blackfin while running Linux, but
+ you can debug the system with a JTAG ICE and use the
+ CYCLES performance registers.
+
+ If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_RETE
+ bool "RETE"
+ help
+ Use the RETE register in the Blackfin exception handler
+ as a stack scratch register. This means you cannot
+ safely use a JTAG ICE while debugging a Blackfin board,
+ but you can safely use the CYCLES performance registers
+ and the NMI.
+
+ If you are unsure, please select "RETN".
+
+config BFIN_SCRATCH_REG_CYCLES
+ bool "CYCLES"
+ help
+ Use the CYCLES register in the Blackfin exception handler
+ as a stack scratch register. This means you cannot
+ safely use the CYCLES performance registers on a Blackfin
+ board at anytime, but you can debug the system with a JTAG
+ ICE and use the NMI.
+
+ If you are unsure, please select "RETN".
+
+endchoice
+
#
# Sorry - but you need to put the hex address here -
#
@@ -448,10 +607,6 @@ endmenu
menu "Blackfin Kernel Optimizations"
-comment "Timer Tick"
-
-source kernel/Kconfig.hz
-
comment "Memory Optimizations"
config I_ENTRY_L1
@@ -614,22 +769,22 @@ endchoice
comment "Cache Support"
-config BLKFIN_CACHE
+config BFIN_ICACHE
bool "Enable ICACHE"
-config BLKFIN_DCACHE
+config BFIN_DCACHE
bool "Enable DCACHE"
-config BLKFIN_DCACHE_BANKA
+config BFIN_DCACHE_BANKA
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
- depends on BLKFIN_DCACHE && !BF531
+ depends on BFIN_DCACHE && !BF531
default n
-config BLKFIN_CACHE_LOCK
- bool "Enable Cache Locking"
+config BFIN_ICACHE_LOCK
+ bool "Enable Instruction Cache Locking"
choice
prompt "Policy"
- depends on BLKFIN_DCACHE
- default BLKFIN_WB
-config BLKFIN_WB
+ depends on BFIN_DCACHE
+ default BFIN_WB
+config BFIN_WB
bool "Write back"
help
Write Back Policy:
@@ -646,7 +801,7 @@ config BLKFIN_WB
If you are unsure of the options and you want to be safe,
then go with Write Through.
-config BLKFIN_WT
+config BFIN_WT
bool "Write through"
help
Write Back Policy:
@@ -672,66 +827,9 @@ config L1_MAX_PIECE
Set the max memory pieces for the L1 SRAM allocation algorithm.
Min value is 16. Max value is 1024.
-menu "Clock Settings"
-
-
-config BFIN_KERNEL_CLOCK
- bool "Re-program Clocks while Kernel boots?"
- default n
- help
- This option decides if kernel clocks are re-programed from the
- bootloader settings. If the clocks are not set, the SDRAM settings
- are also not changed, and the Bootloader does 100% of the hardware
- configuration.
-
-config VCO_MULT
- int "VCO Multiplier"
- depends on BFIN_KERNEL_CLOCK
- default "22" if BFIN533_EZKIT
- default "45" if BFIN533_STAMP
- default "20" if BFIN537_STAMP
- default "22" if BFIN533_BLUETECHNIX_CM
- default "20" if BFIN537_BLUETECHNIX_CM
- default "20" if BFIN561_BLUETECHNIX_CM
- default "20" if BFIN561_EZKIT
-
-config CCLK_DIV
- int "Core Clock Divider"
- depends on BFIN_KERNEL_CLOCK
- default 1 if BFIN533_EZKIT
- default 1 if BFIN533_STAMP
- default 1 if BFIN537_STAMP
- default 1 if BFIN533_BLUETECHNIX_CM
- default 1 if BFIN537_BLUETECHNIX_CM
- default 1 if BFIN561_BLUETECHNIX_CM
- default 1 if BFIN561_EZKIT
-
-config SCLK_DIV
- int "System Clock Divider"
- depends on BFIN_KERNEL_CLOCK
- default 5 if BFIN533_EZKIT
- default 5 if BFIN533_STAMP
- default 4 if BFIN537_STAMP
- default 5 if BFIN533_BLUETECHNIX_CM
- default 4 if BFIN537_BLUETECHNIX_CM
- default 4 if BFIN561_BLUETECHNIX_CM
- default 5 if BFIN561_EZKIT
-
-config CLKIN_HALF
- bool "Half ClockIn"
- depends on BFIN_KERNEL_CLOCK
- default n
-
-config PLL_BYPASS
- bool "Bypass PLL"
- depends on BFIN_KERNEL_CLOCK
- default n
-
-endmenu
-
comment "Asynchonous Memory Configuration"
-menu "EBIU_AMBCTL Global Control"
+menu "EBIU_AMGCTL Global Control"
config C_AMCKEN
bool "Enable CLKOUT"
default y
@@ -941,24 +1039,6 @@ config DEBUG_ICACHE_CHECK
also relocates the irq_panic() function to L1 memory, (which is
un-cached).
-config DEBUG_KERNEL_START
- bool "Debug Kernel Startup"
- depends on DEBUG_KERNEL
- help
- Say Y here to put in an mini-execption handler before the kernel
- replaces the bootloader exception handler. This will stop kernels
- from dieing at startup with no visible error messages.
-
-config DEBUG_SERIAL_EARLY_INIT
- bool "Initialize serial driver early"
- default n
- depends on SERIAL_BFIN
- help
- Say Y here if you want to get kernel output early when kernel
- crashes before the normal console initialization. If this option
- is enable, console output will always go to the ttyBF0, no matter
- what kernel boot paramters you set.
-
config DEBUG_HUNT_FOR_ZERO
bool "Catch NULL pointer reads/writes"
default y
@@ -973,8 +1053,89 @@ config DEBUG_HUNT_FOR_ZERO
Enabling this option will take up an extra entry in CPLB table.
Otherwise, there is no extra overhead.
+config DEBUG_BFIN_HWTRACE_ON
+ bool "Turn on Blackfin's Hardware Trace"
+ default y
+ help
+ All Blackfins include a Trace Unit which stores a history of the last
+ 16 changes in program flow taken by the program sequencer. The history
+ allows the user to recreate the program sequencer’s recent path. This
+ can be handy when an application dies - we print out the execution
+ path of how it got to the offending instruction.
+
+ By turning this off, you may save a tiny amount of power.
+
+choice
+ prompt "Omit loop Tracing"
+ default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ depends on DEBUG_BFIN_HWTRACE_ON
+ help
+ The trace buffer can be configured to omit recording of changes in
+ program flow that match either the last entry or one of the last
+ two entries. Omitting one of these entries from the record prevents
+ the trace buffer from overflowing because of any sort of loop (for, do
+ while, etc) in the program.
+
+ Because zero-overhead Hardware loops are not recorded in the trace buffer,
+ this feature can be used to prevent trace overflow from loops that
+ are nested four deep.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ bool "Trace all Loops"
+ help
+ The trace buffer records all changes of flow
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ bool "Compress single-level loops"
+ help
+ The trace buffer does not record single loops - helpful if trace
+ is spinning on a while or do loop.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+ bool "Compress two-level loops"
+ help
+ The trace buffer does not record loops two levels deep. Helpful if
+ the trace is spinning in a nested loop
+
+endchoice
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION
+ int
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+
+
+config DEBUG_BFIN_HWTRACE_EXPAND
+ bool "Expand Trace Buffer greater than 16 entries"
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default n
+ help
+ By selecting this option, every time the 16 hardware entries in
+ the Blackfin's HW Trace buffer are full, the kernel will move them
+ into a software buffer, for dumping when there is an issue. This
+ has a great impact on performance, (an interrupt every 16 change of
+ flows) and should normally be turned off, except in those nasty
+ debugging sessions
+
+config DEBUG_BFIN_HWTRACE_EXPAND_LEN
+ int "Size of Trace buffer (in power of 2k)"
+ range 0 4
+ depends on DEBUG_BFIN_HWTRACE_EXPAND
+ default 1
+ help
+ This sets the size of the software buffer that the trace information
+ is kept in.
+ 0 for (2^0) 1k, or 256 entries,
+ 1 for (2^1) 2k, or 512 entries,
+ 2 for (2^2) 4k, or 1024 entries,
+ 3 for (2^3) 8k, or 2048 entries,
+ 4 for (2^4) 16k, or 4096 entries
+
config DEBUG_BFIN_NO_KERN_HWTRACE
bool "Trace user apps (turn off hwtrace in kernel)"
+ depends on DEBUG_BFIN_HWTRACE_ON
default n
help
Some pieces of the kernel contain a lot of flow changes which can
@@ -985,6 +1146,20 @@ config DEBUG_BFIN_NO_KERN_HWTRACE
Say Y here to disable hardware tracing in some known "jumpy" pieces
of code so that the trace buffer will extend further back.
+config EARLY_PRINTK
+ bool "Early printk"
+ default n
+ help
+ This option enables special console drivers which allow the kernel
+ to print messages very early in the bootup process.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. After enabling this
+ feature, you must add "earlyprintk=serial,uart0,57600" to the
+ command line (bootargs). It is safe to say Y here in all cases, as
+ all of this lives in the init section and is thrown away after the
+ kernel boots completely.
+
config DUAL_CORE_TEST_MODULE
tristate "Dual Core Test Module"
depends on (BF561)
diff --git a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig
index 1cf1ab28dc66..57f58d5cd47a 100644
--- a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -184,19 +192,17 @@ CONFIG_WDTIMER=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=27000000
-CONFIG_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=750000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -204,6 +210,20 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=32
+CONFIG_MEM_ADD_WIDTH=9
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
#
# Memory Optimizations
#
@@ -243,19 +263,14 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
-#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
#
# Asynchonous Memory Configuration
#
@@ -277,22 +292,19 @@ CONFIG_C_AMBEN_ALL=y
CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0xAAC3
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
@@ -327,7 +339,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -368,20 +379,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -448,7 +447,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -466,10 +474,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -513,7 +517,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -550,16 +553,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -587,10 +587,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -599,10 +595,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -610,19 +602,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
#
# Network device support
#
@@ -631,10 +610,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -644,27 +619,15 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -688,6 +651,7 @@ CONFIG_SMC91X=y
#
CONFIG_INPUT=m
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -704,6 +668,7 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -718,7 +683,7 @@ CONFIG_INPUT_EVDEV=m
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -758,10 +723,6 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -773,7 +734,6 @@ CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
CONFIG_BLACKFIN_DPMC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -781,10 +741,6 @@ CONFIG_BLACKFIN_DPMC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -803,22 +759,22 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -830,16 +786,19 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -862,18 +821,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -913,17 +871,29 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
#
-# RTC drivers
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
CONFIG_RTC_DRV_BFIN=y
#
@@ -939,14 +909,6 @@ CONFIG_RTC_DRV_BFIN=y
# DMA Devices
#
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
#
# PBX support
#
@@ -1047,6 +1009,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1124,14 +1087,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1154,6 +1123,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1161,3 +1131,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig
index 64b7f1b3b2af..306302baff06 100644
--- a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -185,9 +193,27 @@ CONFIG_WDTIMER=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=11059200
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=750000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+
+#
+# Memory Setup
+#
CONFIG_MEM_SIZE=128
CONFIG_MEM_ADD_WIDTH=11
CONFIG_ENET_FLASH_PIN=0
@@ -198,6 +224,9 @@ CONFIG_BOOT_LOAD=0x1000
#
# CONFIG_BFIN_ALIVE_LED is not set
# CONFIG_BFIN_IDLE_LED is not set
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700
CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730
CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700
@@ -207,15 +236,6 @@ CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730
# Blackfin Kernel Optimizations
#
-#
-# Timer Tick
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
#
# Memory Optimizations
#
@@ -255,19 +275,14 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
-#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
#
# Asynchonous Memory Configuration
#
@@ -289,22 +304,19 @@ CONFIG_C_AMBEN_ALL=y
CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0xAAC3
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
@@ -339,7 +351,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -380,20 +391,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -460,7 +459,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -478,10 +486,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -525,7 +529,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -562,16 +565,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -599,10 +599,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -611,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -622,19 +614,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
#
# Network device support
#
@@ -643,10 +622,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -656,27 +631,15 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -700,6 +663,7 @@ CONFIG_SMC91X=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -716,8 +680,14 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_BF53X_PFBUTTONS is not set
CONFIG_TWI_KEYPAD=m
@@ -734,7 +704,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -777,10 +747,6 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -792,7 +758,6 @@ CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
CONFIG_BLACKFIN_DPMC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -800,11 +765,8 @@ CONFIG_BLACKFIN_DPMC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
@@ -818,10 +780,11 @@ CONFIG_I2C_ALGOBIT=m
# I2C Hardware Bus support
#
# CONFIG_I2C_BLACKFIN_GPIO is not set
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
@@ -857,18 +820,16 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -896,6 +857,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -920,22 +882,30 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -957,10 +927,6 @@ CONFIG_ADV7393_1XMEM=y
# CONFIG_ADV7393_2XMEM is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
@@ -1001,7 +967,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y
# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_AD1981B=m
CONFIG_SND_BLACKFIN_SPORT=0
CONFIG_SND_BLACKFIN_SPI_PFBIT=4
CONFIG_SND_BFIN_AD73311=m
@@ -1009,10 +974,15 @@ CONFIG_SND_BFIN_SPORT=0
CONFIG_SND_BFIN_AD73311_SE=4
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
+#
+# SoC Audio for the ADI Blackfin
+#
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
#
# Open Sound System
#
@@ -1033,18 +1003,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -1084,44 +1053,50 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_BFIN=y
#
-# DMA Devices
+# DMA Engine support
#
+# CONFIG_DMA_ENGINE is not set
#
-# Auxiliary Display support
+# DMA Clients
#
#
-# Virtualization
+# DMA Devices
#
#
@@ -1224,6 +1199,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1301,14 +1277,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1331,6 +1313,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1338,3 +1321,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig
index ccf09dc09a18..828b604438eb 100644
--- a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -147,13 +155,6 @@ CONFIG_IRQ_PLL_WAKEUP=7
# BF537 Specific Configuration
#
-#
-# PORT F/G Selection
-#
-CONFIG_BF537_PORT_F=y
-# CONFIG_BF537_PORT_G is not set
-# CONFIG_BF537_PORT_H is not set
-
#
# Interrupt Priority Assignment
#
@@ -199,19 +200,17 @@ CONFIG_IRQ_WATCH=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -219,6 +218,20 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
#
# Memory Optimizations
#
@@ -258,19 +271,14 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
-#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
#
# Asynchonous Memory Configuration
#
@@ -298,16 +306,13 @@ CONFIG_BANK_3=0x99B3
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
@@ -342,7 +347,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -383,20 +387,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -463,7 +455,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -481,10 +482,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -528,7 +525,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -565,13 +561,10 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_BFIN=m
CONFIG_BFIN_NAND_BASE=0x20212000
CONFIG_BFIN_NAND_CLE=2
@@ -580,11 +573,13 @@ CONFIG_BFIN_NAND_READY=3
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -612,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -624,10 +615,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -635,19 +622,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
#
# Network device support
#
@@ -656,11 +630,20 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
#
-# PHY device support
+# MII PHY device drivers
#
-# CONFIG_PHYLIB is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@@ -674,27 +657,15 @@ CONFIG_BFIN_TX_DESC_NUM=10
CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_BFIN_MAC_RMII is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -718,6 +689,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -734,8 +706,14 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_BF53X_PFBUTTONS is not set
CONFIG_TWI_KEYPAD=m
@@ -752,7 +730,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -803,10 +781,6 @@ CONFIG_CAN_BLACKFIN=m
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -818,7 +792,6 @@ CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
CONFIG_BLACKFIN_DPMC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -826,11 +799,8 @@ CONFIG_BLACKFIN_DPMC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
@@ -846,10 +816,11 @@ CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_BLACKFIN_GPIO is not set
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
@@ -885,18 +856,16 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -924,6 +893,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -948,11 +918,8 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
# Graphics support
@@ -960,12 +927,23 @@ CONFIG_HWMON=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_LCD_CLASS_DEVICE=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -991,10 +969,6 @@ CONFIG_LQ035_SLAVE_ADDR=0x58
# CONFIG_FB_BFIN_BGR is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
@@ -1035,7 +1009,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y
# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_AD1981B=m
CONFIG_SND_BLACKFIN_SPORT=0
CONFIG_SND_BLACKFIN_SPI_PFBIT=4
CONFIG_SND_BFIN_AD73311=m
@@ -1043,10 +1016,15 @@ CONFIG_SND_BFIN_SPORT=0
CONFIG_SND_BFIN_AD73311_SE=4
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
+#
+# SoC Audio for the ADI Blackfin
+#
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
#
# Open Sound System
#
@@ -1067,18 +1045,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -1118,44 +1095,50 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_BFIN=y
#
-# DMA Devices
+# DMA Engine support
#
+# CONFIG_DMA_ENGINE is not set
#
-# Auxiliary Display support
+# DMA Clients
#
#
-# Virtualization
+# DMA Devices
#
#
@@ -1258,6 +1241,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1335,14 +1319,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1365,6 +1355,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1372,3 +1363,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig
index ac8390fafa9c..e80f3d59c283 100644
--- a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -51,7 +54,6 @@ CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -59,14 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -165,6 +173,7 @@ CONFIG_IRQ_UART1_TX=10
#
# BF548 Specific Configuration
#
+# CONFIG_DEB_DMA_URGENT is not set
#
# Interrupt Priority Assignment
@@ -242,24 +251,35 @@ CONFIG_IRQ_PINT2=11
CONFIG_IRQ_PINT3=11
#
-# Board customizations
+# Pin Interrupt to Port Assignment
#
-# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Assignment
#
-CONFIG_CLKIN_HZ=25000000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
+CONFIG_PINTx_REASSIGN=y
+CONFIG_PINT0_ASSIGN=0x00000101
+CONFIG_PINT1_ASSIGN=0x01010000
+CONFIG_PINT2_ASSIGN=0x07000101
+CONFIG_PINT3_ASSIGN=0x02020303
#
-# Blackfin Kernel Optimizations
+# Board customizations
#
+# CONFIG_CMDLINE_BOOL is not set
#
-# Timer Tick
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=533000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -267,6 +287,20 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
#
# Memory Optimizations
#
@@ -275,12 +309,12 @@ CONFIG_EXCPT_IRQ_SYSC_L1=y
CONFIG_DO_IRQ_L1=y
CONFIG_CORE_TIMER_IRQ_L1=y
CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
CONFIG_ARITHMETIC_OPS_L1=y
CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
# CONFIG_IP_CHECKSUM_L1 is not set
CONFIG_CACHELINE_ALIGNED_L1=y
# CONFIG_SYSCALL_TAB_L1 is not set
@@ -306,19 +340,14 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
-#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
#
# Asynchonous Memory Configuration
#
@@ -327,7 +356,6 @@ CONFIG_L1_MAX_PIECE=16
# EBIU_AMBCTL Global Control
#
CONFIG_C_AMCKEN=y
-CONFIG_C_CDPRIO=y
# CONFIG_C_AMBEN is not set
# CONFIG_C_AMBEN_B0 is not set
# CONFIG_C_AMBEN_B0_B1 is not set
@@ -338,7 +366,7 @@ CONFIG_C_AMBEN_ALL=y
# EBIU_AMBCTL Control
#
CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_1=0x5554
CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0x99B3
@@ -346,16 +374,13 @@ CONFIG_BANK_3=0x99B3
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
@@ -383,7 +408,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -424,20 +448,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -463,7 +475,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -475,29 +496,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
#
# User Modules And Translation Layers
#
-# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
@@ -509,8 +524,10 @@ CONFIG_MTD_BLOCK=y
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -521,22 +538,32 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_MW320D is not set
+CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_BF5xx is not set
-CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -548,16 +575,23 @@ CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_BFIN is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BF5XX=y
+CONFIG_MTD_NAND_BF5XX_HWECC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -585,41 +619,61 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_ATA is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_MD is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# Fusion MPT device support
+# SCSI Transports
#
-# CONFIG_FUSION is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
-# IEEE 1394 (FireWire) support
+# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_PATA_PLATFORM is not set
+CONFIG_PATA_BF54X=y
+CONFIG_PATA_BF54X_DMA=y
#
-# I2O device support
+# Multi-device support (RAID and LVM)
#
+# CONFIG_MD is not set
#
# Network device support
@@ -629,10 +683,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -641,28 +691,16 @@ CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_SMSC911X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -686,6 +724,7 @@ CONFIG_MII=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -702,10 +741,17 @@ CONFIG_INPUT=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_BF53X_PFBUTTONS is not set
+# CONFIG_TWI_KEYPAD is not set
#
# Hardware I/O ports
@@ -718,12 +764,15 @@ CONFIG_INPUT_MISC=y
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+# CONFIG_AD5304 is not set
+# CONFIG_BF5xx_TEA5764 is not set
# CONFIG_BF5xx_FBDMA is not set
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
@@ -760,14 +809,9 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -775,32 +819,114 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
#
-# I2C support
+# I2C Hardware Bus support
#
-# CONFIG_I2C is not set
+# CONFIG_I2C_BLACKFIN_GPIO is not set
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9543 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
#
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
#
-# CONFIG_W1 is not set
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
-# Hardware Monitoring support
+# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -812,16 +938,19 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -843,6 +972,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
@@ -851,11 +984,20 @@ CONFIG_USB_ARCH_HAS_HCD=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
#
-# MMC/SD Card support
+# MMC/SD Host Controller Drivers
#
-# CONFIG_MMC is not set
+CONFIG_SDH_BFIN=m
+# CONFIG_SPI_MMC is not set
#
# LED devices
@@ -894,15 +1036,37 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
CONFIG_RTC_DRV_BFIN=y
#
@@ -918,14 +1082,6 @@ CONFIG_RTC_DRV_BFIN=y
# DMA Devices
#
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
#
# PBX support
#
@@ -991,8 +1147,25 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -1040,36 +1213,20 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_HWERR=y
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-# CONFIG_DEBUG_KERNEL_START is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1092,9 +1249,12 @@ CONFIG_SECURITY_CAPABILITIES=y
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig
index 51c0b6f97798..85e647f87759 100644
--- a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -58,15 +61,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -229,19 +237,17 @@ CONFIG_IRQ_WDTIMER=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=30000000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -249,6 +255,20 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=9
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
#
# Memory Optimizations
#
@@ -288,19 +308,14 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-# CONFIG_BLKFIN_WB is not set
-CONFIG_BLKFIN_WT=y
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
-#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
#
# Asynchonous Memory Configuration
#
@@ -326,22 +341,19 @@ CONFIG_C_AMBEN_ALL=y
CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0xAAC3
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
@@ -364,7 +376,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -405,20 +416,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -485,7 +484,16 @@ CONFIG_IRTTY_SIR=m
# FIR device drivers
#
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -503,10 +511,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -550,7 +554,6 @@ CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -588,16 +591,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -625,10 +625,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -637,10 +633,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -648,19 +640,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
#
# Network device support
#
@@ -669,10 +648,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -682,27 +657,15 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -726,6 +689,7 @@ CONFIG_SMC91X=y
#
CONFIG_INPUT=m
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -742,6 +706,7 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -756,7 +721,7 @@ CONFIG_INPUT_EVDEV=m
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -796,10 +761,6 @@ CONFIG_UNIX98_PTYS=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -810,7 +771,6 @@ CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -818,10 +778,6 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -840,22 +796,22 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -867,16 +823,19 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -899,18 +858,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -952,14 +910,6 @@ CONFIG_USB_ARCH_HAS_HCD=y
# DMA Devices
#
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
#
# PBX support
#
@@ -1060,6 +1010,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1137,14 +1088,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_DUAL_CORE_TEST_MODULE is not set
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
@@ -1168,6 +1125,7 @@ CONFIG_SECURITY_CAPABILITIES=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
@@ -1175,3 +1133,4 @@ CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/trunk/arch/blackfin/configs/PNAV-10_defconfig b/trunk/arch/blackfin/configs/PNAV-10_defconfig
index 983ed181c896..15e36aaf2186 100644
--- a/trunk/arch/blackfin/configs/PNAV-10_defconfig
+++ b/trunk/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.5
+# Linux kernel version: 2.6.22.6
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_IRQCHIP_DEMUX_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -41,6 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -57,15 +59,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9
-CONFIG_BUDDY=y
# CONFIG_NP2 is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -146,13 +153,6 @@ CONFIG_IRQ_PLL_WAKEUP=7
# BF537 Specific Configuration
#
-#
-# PORT F/G Selection
-#
-CONFIG_BF537_PORT_F=y
-# CONFIG_BF537_PORT_G is not set
-# CONFIG_BF537_PORT_H is not set
-
#
# Interrupt Priority Assignment
#
@@ -198,19 +198,17 @@ CONFIG_IRQ_WATCH=13
# CONFIG_CMDLINE_BOOL is not set
#
-# Board Setup
+# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=24576000
-CONFIG_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Blackfin Kernel Optimizations
-#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MIN_SCLK_HZ=27000000
#
-# Timer Tick
+# Kernel Timer/Scheduler
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -218,6 +216,20 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+#
+# Memory Setup
+#
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
#
# Memory Optimizations
#
@@ -257,19 +269,14 @@ CONFIG_DMA_UNCACHED_1M=y
#
# Cache Support
#
-CONFIG_BLKFIN_CACHE=y
-CONFIG_BLKFIN_DCACHE=y
-# CONFIG_BLKFIN_DCACHE_BANKA is not set
-# CONFIG_BLKFIN_CACHE_LOCK is not set
-CONFIG_BLKFIN_WB=y
-# CONFIG_BLKFIN_WT is not set
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
-#
-# Clock Settings
-#
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-
#
# Asynchonous Memory Configuration
#
@@ -297,16 +304,13 @@ CONFIG_BANK_3=0x99B3
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
@@ -334,7 +338,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -375,20 +378,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -414,7 +405,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -432,10 +432,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -473,7 +469,6 @@ CONFIG_MTD_CFI_I2=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -499,13 +494,10 @@ CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_BFIN=y
CONFIG_BFIN_NAND_BASE=0x20100000
CONFIG_BFIN_NAND_CLE=2
@@ -514,11 +506,13 @@ CONFIG_BFIN_NAND_READY=44
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -546,10 +540,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -558,10 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -569,19 +555,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
#
# Network device support
#
@@ -590,11 +563,20 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
#
-# PHY device support
+# MII PHY device drivers
#
-# CONFIG_PHYLIB is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@@ -608,27 +590,15 @@ CONFIG_BFIN_TX_DESC_NUM=100
CONFIG_BFIN_RX_DESC_NUM=100
CONFIG_BFIN_MAC_RMII=y
# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -652,6 +622,7 @@ CONFIG_BFIN_MAC_RMII=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -670,6 +641,7 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
@@ -681,7 +653,13 @@ CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_BF53X_PFBUTTONS is not set
# CONFIG_TWI_KEYPAD is not set
@@ -697,7 +675,7 @@ CONFIG_INPUT_UINPUT=y
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BFIN_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BF5xx_TIMERS is not set
# CONFIG_BF5xx_PPI is not set
@@ -749,14 +727,9 @@ CONFIG_CAN_BLACKFIN=m
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -764,11 +737,8 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
@@ -784,10 +754,11 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_BLACKFIN_GPIO is not set
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
@@ -823,18 +794,16 @@ CONFIG_SPI_BFIN=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -862,6 +831,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -886,11 +856,8 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
# Graphics support
@@ -898,12 +865,23 @@ CONFIG_HWMON=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -921,10 +899,6 @@ CONFIG_FB_BFIN_LANDSCAPE=y
# CONFIG_FB_BFIN_BGR is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
@@ -936,8 +910,6 @@ CONFIG_SOUND=y
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
@@ -959,19 +931,23 @@ CONFIG_SND_PCM=m
# ALSA Blackfin devices
#
# CONFIG_SND_BLACKFIN_AD1836 is not set
-CONFIG_SND_BLACKFIN_AD1981B=m
# CONFIG_SND_BFIN_AD73311 is not set
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
+#
+# SoC Audio for the ADI Blackfin
+#
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
+# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
@@ -989,18 +965,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# USB Gadget Support
#
-# CONFIG_SPI_MMC is not set
+# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
@@ -1040,44 +1015,50 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_BFIN=y
#
-# DMA Devices
+# DMA Engine support
#
+# CONFIG_DMA_ENGINE is not set
#
-# Auxiliary Display support
+# DMA Clients
#
#
-# Virtualization
+# DMA Devices
#
#
@@ -1176,6 +1157,7 @@ CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1256,11 +1238,17 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+# CONFIG_DEBUG_MMRS is not set
# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_CPLB_INFO is not set
# CONFIG_ACCESS_CHECK is not set
@@ -1283,9 +1271,11 @@ CONFIG_SECURITY_CAPABILITIES=y
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/trunk/arch/blackfin/kernel/Makefile b/trunk/arch/blackfin/kernel/Makefile
index f429ebc3a961..8aeb6066b19b 100644
--- a/trunk/arch/blackfin/kernel/Makefile
+++ b/trunk/arch/blackfin/kernel/Makefile
@@ -7,11 +7,10 @@ extra-y := init_task.o vmlinux.lds
obj-y := \
entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \
- fixed_code.o cplbinit.o cacheinit.o
+ fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o
-obj-$(CONFIG_BF53x) += bfin_gpio.o
-obj-$(CONFIG_BF561) += bfin_gpio.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o
obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o
obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/trunk/arch/blackfin/kernel/bfin_dma_5xx.c b/trunk/arch/blackfin/kernel/bfin_dma_5xx.c
index 7cf02f02a1db..e19164fb4cd1 100644
--- a/trunk/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/trunk/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -73,6 +73,11 @@ static int __init blackfin_dma_init(void)
/* Mark MEMDMA Channel 0 as requested since we're using it internally */
dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED;
dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED;
+
+#if defined(CONFIG_DEB_DMA_URGENT)
+ bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE()
+ | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT);
+#endif
return 0;
}
@@ -265,10 +270,23 @@ void set_dma_next_desc_addr(unsigned int channel, unsigned long addr)
dma_ch[channel].regs->next_desc_ptr = addr;
SSYNC();
- pr_debug("set_dma_start_addr() : END\n");
+ pr_debug("set_dma_next_desc_addr() : END\n");
}
EXPORT_SYMBOL(set_dma_next_desc_addr);
+void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr)
+{
+ pr_debug("set_dma_curr_desc_addr() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->curr_desc_ptr = addr;
+ SSYNC();
+ pr_debug("set_dma_curr_desc_addr() : END\n");
+}
+EXPORT_SYMBOL(set_dma_curr_desc_addr);
+
void set_dma_x_count(unsigned int channel, unsigned short x_count)
{
BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
@@ -345,6 +363,16 @@ void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg)
}
EXPORT_SYMBOL(set_dma_sg);
+void set_dma_curr_addr(unsigned int channel, unsigned long addr)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->curr_addr_ptr = addr;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_curr_addr);
+
/*------------------------------------------------------------------------------
* Get the DMA status of a specific DMA channel from the system.
*-----------------------------------------------------------------------------*/
@@ -408,6 +436,10 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size)
blackfin_dcache_flush_range((unsigned int)src,
(unsigned int)(src + size));
+ if ((unsigned long)dest < memory_end)
+ blackfin_dcache_invalidate_range((unsigned int)dest,
+ (unsigned int)(dest + size));
+
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
if ((unsigned long)src < (unsigned long)dest)
@@ -515,6 +547,8 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size)
}
}
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
;
@@ -524,9 +558,6 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size)
bfin_write_MDMA_S0_CONFIG(0);
bfin_write_MDMA_D0_CONFIG(0);
- if ((unsigned long)dest < memory_end)
- blackfin_dcache_invalidate_range((unsigned int)dest,
- (unsigned int)(dest + size));
local_irq_restore(flags);
return dest;
@@ -555,13 +586,14 @@ void *safe_dma_memcpy(void *dest, const void *src, size_t size)
}
EXPORT_SYMBOL(safe_dma_memcpy);
-void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
+void dma_outsb(unsigned long addr, const void *buf, unsigned short len)
{
unsigned long flags;
local_irq_save(flags);
- blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+ blackfin_dcache_flush_range((unsigned int)buf,
+ (unsigned int)(buf) + len);
bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -576,6 +608,8 @@ void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8);
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
@@ -588,10 +622,13 @@ void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
EXPORT_SYMBOL(dma_outsb);
-void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
+void dma_insb(unsigned long addr, void *buf, unsigned short len)
{
unsigned long flags;
+ blackfin_dcache_invalidate_range((unsigned int)buf,
+ (unsigned int)(buf) + len);
+
local_irq_save(flags);
bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -606,7 +643,7 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8);
- blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len);
+ SSYNC();
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
@@ -619,13 +656,14 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_insb);
-void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
+void dma_outsw(unsigned long addr, const void *buf, unsigned short len)
{
unsigned long flags;
local_irq_save(flags);
- blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+ blackfin_dcache_flush_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(short));
bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -640,6 +678,8 @@ void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16);
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
@@ -651,10 +691,13 @@ void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_outsw);
-void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
+void dma_insw(unsigned long addr, void *buf, unsigned short len)
{
unsigned long flags;
+ blackfin_dcache_invalidate_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(short));
+
local_irq_save(flags);
bfin_write_MDMA_D0_START_ADDR(buf);
@@ -670,7 +713,7 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16);
- blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len);
+ SSYNC();
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
@@ -683,13 +726,14 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_insw);
-void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
+void dma_outsl(unsigned long addr, const void *buf, unsigned short len)
{
unsigned long flags;
local_irq_save(flags);
- blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+ blackfin_dcache_flush_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(long));
bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
@@ -704,6 +748,8 @@ void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32);
+ SSYNC();
+
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
@@ -715,10 +761,13 @@ void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
}
EXPORT_SYMBOL(dma_outsl);
-void dma_insl(const void __iomem *addr, void *buf, unsigned short len)
+void dma_insl(unsigned long addr, void *buf, unsigned short len)
{
unsigned long flags;
+ blackfin_dcache_invalidate_range((unsigned int)buf,
+ (unsigned int)(buf) + len * sizeof(long));
+
local_irq_save(flags);
bfin_write_MDMA_D0_START_ADDR(buf);
@@ -734,7 +783,7 @@ void dma_insl(const void __iomem *addr, void *buf, unsigned short len)
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32);
bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32);
- blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len);
+ SSYNC();
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE));
diff --git a/trunk/arch/blackfin/kernel/bfin_gpio.c b/trunk/arch/blackfin/kernel/bfin_gpio.c
index 5d488ef965ce..3fe0cd49e8db 100644
--- a/trunk/arch/blackfin/kernel/bfin_gpio.c
+++ b/trunk/arch/blackfin/kernel/bfin_gpio.c
@@ -7,7 +7,7 @@
* Description: GPIO Abstraction Layer
*
* Modified:
- * Copyright 2006 Analog Devices Inc.
+ * Copyright 2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -28,9 +28,9 @@
*/
/*
-* Number BF537/6/4 BF561 BF533/2/1
+* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2
*
-* GPIO_0 PF0 PF0 PF0
+* GPIO_0 PF0 PF0 PF0 PA0...PJ13
* GPIO_1 PF1 PF1 PF1
* GPIO_2 PF2 PF2 PF2
* GPIO_3 PF3 PF3 PF3
@@ -80,6 +80,7 @@
* GPIO_47 PH15 PF47
*/
+#include
#include
#include
#include
@@ -87,6 +88,36 @@
#include
#include
+#if ANOMALY_05000311 || ANOMALY_05000323
+enum {
+ AWA_data = SYSCR,
+ AWA_data_clear = SYSCR,
+ AWA_data_set = SYSCR,
+ AWA_toggle = SYSCR,
+ AWA_maska = UART_SCR,
+ AWA_maska_clear = UART_SCR,
+ AWA_maska_set = UART_SCR,
+ AWA_maska_toggle = UART_SCR,
+ AWA_maskb = UART_GCTL,
+ AWA_maskb_clear = UART_GCTL,
+ AWA_maskb_set = UART_GCTL,
+ AWA_maskb_toggle = UART_GCTL,
+ AWA_dir = SPORT1_STAT,
+ AWA_polar = SPORT1_STAT,
+ AWA_edge = SPORT1_STAT,
+ AWA_both = SPORT1_STAT,
+#if ANOMALY_05000311
+ AWA_inen = TIMER_ENABLE,
+#elif ANOMALY_05000323
+ AWA_inen = DMA1_1_CONFIG,
+#endif
+};
+ /* Anomaly Workaround */
+#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
+#else
+#define AWA_DUMMY_READ(...) do { } while (0)
+#endif
+
#ifdef BF533_FAMILY
static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
(struct gpio_port_t *) FIO_FLAG_D,
@@ -116,11 +147,31 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
};
#endif
+#ifdef BF548_FAMILY
+static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *)PORTA_FER,
+ (struct gpio_port_t *)PORTB_FER,
+ (struct gpio_port_t *)PORTC_FER,
+ (struct gpio_port_t *)PORTD_FER,
+ (struct gpio_port_t *)PORTE_FER,
+ (struct gpio_port_t *)PORTF_FER,
+ (struct gpio_port_t *)PORTG_FER,
+ (struct gpio_port_t *)PORTH_FER,
+ (struct gpio_port_t *)PORTI_FER,
+ (struct gpio_port_t *)PORTJ_FER,
+};
+#endif
+
static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
-char *str_ident = NULL;
-#define RESOURCE_LABEL_SIZE 16
+#define MAX_RESOURCES 256
+#define RESOURCE_LABEL_SIZE 16
+
+struct str_ident {
+ char name[RESOURCE_LABEL_SIZE];
+} *str_ident;
+
#ifdef CONFIG_PM
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -141,21 +192,32 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT
#endif /* CONFIG_PM */
+#if defined(BF548_FAMILY)
+inline int check_gpio(unsigned short gpio)
+{
+ if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
+ || gpio == GPIO_PH14 || gpio == GPIO_PH15
+ || gpio == GPIO_PJ14 || gpio == GPIO_PJ15
+ || gpio > MAX_BLACKFIN_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+#else
inline int check_gpio(unsigned short gpio)
{
if (gpio >= MAX_BLACKFIN_GPIOS)
return -EINVAL;
return 0;
}
+#endif
static void set_label(unsigned short ident, const char *label)
{
if (label && str_ident) {
- strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ strncpy(str_ident[ident].name, label,
RESOURCE_LABEL_SIZE);
- str_ident[ident * RESOURCE_LABEL_SIZE +
- RESOURCE_LABEL_SIZE - 1] = 0;
+ str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
}
}
@@ -164,14 +226,13 @@ static char *get_label(unsigned short ident)
if (!str_ident)
return "UNKNOWN";
- return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
- (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+ return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
}
static int cmp_label(unsigned short ident, const char *label)
{
if (label && str_ident)
- return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ return strncmp(str_ident[ident].name,
label, strlen(label));
else
return -EINVAL;
@@ -181,50 +242,84 @@ static int cmp_label(unsigned short ident, const char *label)
static void port_setup(unsigned short gpio, unsigned short usage)
{
if (!check_gpio(gpio)) {
- if (usage == GPIO_USAGE) {
+ if (usage == GPIO_USAGE)
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
- } else
+ else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
SSYNC();
}
}
+#elif defined(BF548_FAMILY)
+static void port_setup(unsigned short gpio, unsigned short usage)
+{
+ if (usage == GPIO_USAGE)
+ gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
+ SSYNC();
+}
#else
# define port_setup(...) do { } while (0)
#endif
#ifdef BF537_FAMILY
-
-#define PMUX_LUT_RES 0
-#define PMUX_LUT_OFFSET 1
-#define PMUX_LUT_ENTRIES 41
-#define PMUX_LUT_SIZE 2
-
-static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = {
- {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11},
- {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11},
- {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10},
- {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10},
- {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9},
- {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7},
- {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5},
- {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4},
- {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3},
- {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1},
- {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1},
- {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0},
- {P_SPI0_SSEL3, 0}
+static struct {
+ unsigned short res;
+ unsigned short offset;
+} port_mux_lut[] = {
+ {.res = P_PPI0_D13, .offset = 11},
+ {.res = P_PPI0_D14, .offset = 11},
+ {.res = P_PPI0_D15, .offset = 11},
+ {.res = P_SPORT1_TFS, .offset = 11},
+ {.res = P_SPORT1_TSCLK, .offset = 11},
+ {.res = P_SPORT1_DTPRI, .offset = 11},
+ {.res = P_PPI0_D10, .offset = 10},
+ {.res = P_PPI0_D11, .offset = 10},
+ {.res = P_PPI0_D12, .offset = 10},
+ {.res = P_SPORT1_RSCLK, .offset = 10},
+ {.res = P_SPORT1_RFS, .offset = 10},
+ {.res = P_SPORT1_DRPRI, .offset = 10},
+ {.res = P_PPI0_D8, .offset = 9},
+ {.res = P_PPI0_D9, .offset = 9},
+ {.res = P_SPORT1_DRSEC, .offset = 9},
+ {.res = P_SPORT1_DTSEC, .offset = 9},
+ {.res = P_TMR2, .offset = 8},
+ {.res = P_PPI0_FS3, .offset = 8},
+ {.res = P_TMR3, .offset = 7},
+ {.res = P_SPI0_SSEL4, .offset = 7},
+ {.res = P_TMR4, .offset = 6},
+ {.res = P_SPI0_SSEL5, .offset = 6},
+ {.res = P_TMR5, .offset = 5},
+ {.res = P_SPI0_SSEL6, .offset = 5},
+ {.res = P_UART1_RX, .offset = 4},
+ {.res = P_UART1_TX, .offset = 4},
+ {.res = P_TMR6, .offset = 4},
+ {.res = P_TMR7, .offset = 4},
+ {.res = P_UART0_RX, .offset = 3},
+ {.res = P_UART0_TX, .offset = 3},
+ {.res = P_DMAR0, .offset = 3},
+ {.res = P_DMAR1, .offset = 3},
+ {.res = P_SPORT0_DTSEC, .offset = 1},
+ {.res = P_SPORT0_DRSEC, .offset = 1},
+ {.res = P_CAN0_RX, .offset = 1},
+ {.res = P_CAN0_TX, .offset = 1},
+ {.res = P_SPI0_SSEL7, .offset = 1},
+ {.res = P_SPORT0_TFS, .offset = 0},
+ {.res = P_SPORT0_DTPRI, .offset = 0},
+ {.res = P_SPI0_SSEL2, .offset = 0},
+ {.res = P_SPI0_SSEL3, .offset = 0},
};
static void portmux_setup(unsigned short per, unsigned short function)
{
- u16 y, muxreg, offset;
+ u16 y, offset, muxreg;
- for (y = 0; y < PMUX_LUT_ENTRIES; y++) {
- if (port_mux_lut[y][PMUX_LUT_RES] == per) {
+ for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
+ if (port_mux_lut[y].res == per) {
/* SET PORTMUX REG */
- offset = port_mux_lut[y][PMUX_LUT_OFFSET];
+ offset = port_mux_lut[y].offset;
muxreg = bfin_read_PORT_MUX();
if (offset != 1) {
@@ -238,18 +333,42 @@ static void portmux_setup(unsigned short per, unsigned short function)
}
}
}
+#elif defined(BF548_FAMILY)
+inline void portmux_setup(unsigned short portno, unsigned short function)
+{
+ u32 pmux;
+
+ pmux = gpio_array[gpio_bank(portno)]->port_mux;
+
+ pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
+ pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
+ gpio_array[gpio_bank(portno)]->port_mux = pmux;
+}
+
+inline u16 get_portmux(unsigned short portno)
+{
+ u32 pmux;
+
+ pmux = gpio_array[gpio_bank(portno)]->port_mux;
+
+ return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
+}
#else
# define portmux_setup(...) do { } while (0)
#endif
+#ifndef BF548_FAMILY
static void default_gpio(unsigned short gpio)
{
unsigned short bank, bitmask;
+ unsigned long flags;
bank = gpio_bank(gpio);
bitmask = gpio_bit(gpio);
+ local_irq_save(flags);
+
gpio_bankb[bank]->maska_clear = bitmask;
gpio_bankb[bank]->maskb_clear = bitmask;
SSYNC();
@@ -258,24 +377,32 @@ static void default_gpio(unsigned short gpio)
gpio_bankb[bank]->polar &= ~bitmask;
gpio_bankb[bank]->both &= ~bitmask;
gpio_bankb[bank]->edge &= ~bitmask;
+ AWA_DUMMY_READ(edge);
+ local_irq_restore(flags);
+
}
+#else
+# define default_gpio(...) do { } while (0)
+#endif
static int __init bfin_gpio_init(void)
{
-
- str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
- if (!str_ident)
+ str_ident = kcalloc(MAX_RESOURCES,
+ sizeof(struct str_ident), GFP_KERNEL);
+ if (str_ident == NULL)
return -ENOMEM;
+ memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident));
+
printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
}
-
arch_initcall(bfin_gpio_init);
+#ifndef BF548_FAMILY
/***********************************************************
*
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -305,6 +432,7 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
else \
gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+ AWA_DUMMY_READ(name); \
local_irq_restore(flags); \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
@@ -316,6 +444,22 @@ SET_GPIO(edge)
SET_GPIO(both)
+#if ANOMALY_05000311 || ANOMALY_05000323
+#define SET_GPIO_SC(name) \
+void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ unsigned long flags; \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ local_irq_save(flags); \
+ if (arg) \
+ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+ else \
+ gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+#else
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
@@ -326,37 +470,20 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
+#endif
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
-
-#if defined(ANOMALY_05000311)
-void set_gpio_data(unsigned short gpio, unsigned short arg)
-{
- unsigned long flags;
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
- local_irq_save(flags);
- if (arg)
- gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
- else
- gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
- bfin_read_CHIPID();
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(set_gpio_data);
-#else
SET_GPIO_SC(data)
-#endif
-
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311 || ANOMALY_05000323
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
- bfin_read_CHIPID();
+ AWA_DUMMY_READ(toggle);
local_irq_restore(flags);
}
#else
@@ -371,13 +498,27 @@ EXPORT_SYMBOL(set_gpio_toggle);
/*Set current PORT date (16-bit word)*/
+#if ANOMALY_05000311 || ANOMALY_05000323
#define SET_GPIO_P(name) \
void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
{ \
+ unsigned long flags; \
+ local_irq_save(flags); \
gpio_bankb[gpio_bank(gpio)]->name = arg; \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
} \
EXPORT_SYMBOL(set_gpiop_ ## name);
+#else
+#define SET_GPIO_P(name) \
+void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ gpio_bankb[gpio_bank(gpio)]->name = arg; \
+} \
+EXPORT_SYMBOL(set_gpiop_ ## name);
+#endif
+SET_GPIO_P(data)
SET_GPIO_P(dir)
SET_GPIO_P(inen)
SET_GPIO_P(polar)
@@ -387,31 +528,30 @@ SET_GPIO_P(maska)
SET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
-void set_gpiop_data(unsigned short gpio, unsigned short arg)
-{
- unsigned long flags;
- local_irq_save(flags);
- gpio_bankb[gpio_bank(gpio)]->data = arg;
- bfin_read_CHIPID();
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(set_gpiop_data);
-#else
-SET_GPIO_P(data)
-#endif
-
-
-
/* Get a specific bit */
-
+#if ANOMALY_05000311 || ANOMALY_05000323
+#define GET_GPIO(name) \
+unsigned short get_gpio_ ## name(unsigned short gpio) \
+{ \
+ unsigned long flags; \
+ unsigned short ret; \
+ local_irq_save(flags); \
+ ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ return ret; \
+} \
+EXPORT_SYMBOL(get_gpio_ ## name);
+#else
#define GET_GPIO(name) \
unsigned short get_gpio_ ## name(unsigned short gpio) \
{ \
return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
} \
EXPORT_SYMBOL(get_gpio_ ## name);
+#endif
+GET_GPIO(data)
GET_GPIO(dir)
GET_GPIO(inen)
GET_GPIO(polar)
@@ -420,33 +560,31 @@ GET_GPIO(both)
GET_GPIO(maska)
GET_GPIO(maskb)
-
-#if defined(ANOMALY_05000311)
-unsigned short get_gpio_data(unsigned short gpio)
-{
- unsigned long flags;
- unsigned short ret;
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
- local_irq_save(flags);
- ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
- bfin_read_CHIPID();
- local_irq_restore(flags);
- return ret;
-}
-EXPORT_SYMBOL(get_gpio_data);
-#else
-GET_GPIO(data)
-#endif
-
/*Get current PORT date (16-bit word)*/
+#if ANOMALY_05000311 || ANOMALY_05000323
+#define GET_GPIO_P(name) \
+unsigned short get_gpiop_ ## name(unsigned short gpio) \
+{ \
+ unsigned long flags; \
+ unsigned short ret; \
+ local_irq_save(flags); \
+ ret = (gpio_bankb[gpio_bank(gpio)]->name); \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ return ret; \
+} \
+EXPORT_SYMBOL(get_gpiop_ ## name);
+#else
#define GET_GPIO_P(name) \
unsigned short get_gpiop_ ## name(unsigned short gpio) \
{ \
return (gpio_bankb[gpio_bank(gpio)]->name);\
} \
EXPORT_SYMBOL(get_gpiop_ ## name);
+#endif
+GET_GPIO_P(data)
GET_GPIO_P(dir)
GET_GPIO_P(inen)
GET_GPIO_P(polar)
@@ -455,21 +593,6 @@ GET_GPIO_P(both)
GET_GPIO_P(maska)
GET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
-unsigned short get_gpiop_data(unsigned short gpio)
-{
- unsigned long flags;
- unsigned short ret;
- local_irq_save(flags);
- ret = gpio_bankb[gpio_bank(gpio)]->data;
- bfin_read_CHIPID();
- local_irq_restore(flags);
- return ret;
-}
-EXPORT_SYMBOL(get_gpiop_data);
-#else
-GET_GPIO_P(data)
-#endif
#ifdef CONFIG_PM
/***********************************************************
@@ -593,6 +716,8 @@ u32 gpio_pm_setup(void)
}
}
+ AWA_DUMMY_READ(maskb_set);
+
if (sic_iwr)
return sic_iwr;
else
@@ -624,12 +749,99 @@ void gpio_pm_restore(void)
gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
}
+ AWA_DUMMY_READ(maskb);
}
#endif
+#endif /* BF548_FAMILY */
+/***********************************************************
+*
+* FUNCTIONS: Blackfin Peripheral Resource Allocation
+* and PortMux Setup
+*
+* INPUTS/OUTPUTS:
+* per Peripheral Identifier
+* label String
+*
+* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+#ifdef BF548_FAMILY
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ if (check_gpio(ident) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ u16 funct = get_portmux(ident);
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+ printk(KERN_ERR
+ "%s: Peripheral %d function %d is already reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+ }
+anyway:
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+
+ portmux_setup(ident, P_FUNCT2MUX(per));
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ local_irq_restore(flags);
+ set_label(ident, label);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+#else
int peripheral_request(unsigned short per, const char *label)
{
@@ -680,7 +892,7 @@ int peripheral_request(unsigned short per, const char *label)
printk(KERN_ERR
"%s: Peripheral %d function %d is already"
- "reserved by %s !\n",
+ " reserved by %s !\n",
__FUNCTION__, ident, P_FUNCT2MUX(per),
get_label(ident));
dump_stack();
@@ -691,8 +903,6 @@ int peripheral_request(unsigned short per, const char *label)
}
anyway:
-
-
portmux_setup(per, P_FUNCT2MUX(per));
port_setup(ident, PERIPHERAL_USAGE);
@@ -704,6 +914,7 @@ int peripheral_request(unsigned short per, const char *label)
return 0;
}
EXPORT_SYMBOL(peripheral_request);
+#endif
int peripheral_request_list(unsigned short per[], const char *label)
{
@@ -711,9 +922,15 @@ int peripheral_request_list(unsigned short per[], const char *label)
int ret;
for (cnt = 0; per[cnt] != 0; cnt++) {
+
ret = peripheral_request(per[cnt], label);
- if (ret < 0)
- return ret;
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--) {
+ peripheral_free(per[cnt - 1]);
+ }
+ return ret;
+ }
}
return 0;
@@ -748,6 +965,8 @@ void peripheral_free(unsigned short per)
reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+ set_label(ident, "free");
+
local_irq_restore(flags);
}
EXPORT_SYMBOL(peripheral_free);
@@ -768,8 +987,8 @@ EXPORT_SYMBOL(peripheral_free_list);
* FUNCTIONS: Blackfin GPIO Driver
*
* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-*
+* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS
+* label String
*
* DESCRIPTION: Blackfin GPIO Driver API
*
@@ -787,17 +1006,39 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_save(flags);
+ /*
+ * Allow that the identical GPIO can
+ * be requested from the same driver twice
+ * Do nothing and return -
+ */
+
+ if (cmp_label(gpio, label) == 0) {
+ local_irq_restore(flags);
+ return 0;
+ }
+
if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+ gpio, get_label(gpio));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
+ if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ printk(KERN_ERR
+ "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+ gpio, get_label(gpio));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
port_setup(gpio, GPIO_USAGE);
+ set_label(gpio, label);
return 0;
}
@@ -823,10 +1064,57 @@ void gpio_free(unsigned short gpio)
reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ set_label(gpio, "free");
+
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_free);
+#ifdef BF548_FAMILY
+void gpio_direction_input(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+void gpio_direction_output(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+void gpio_set_value(unsigned short gpio, unsigned short arg)
+{
+ if (arg)
+ gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
+
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+unsigned short gpio_get_value(unsigned short gpio)
+{
+ return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+#else
+
void gpio_direction_input(unsigned short gpio)
{
unsigned long flags;
@@ -836,6 +1124,7 @@ void gpio_direction_input(unsigned short gpio)
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+ AWA_DUMMY_READ(inen);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_direction_input);
@@ -849,6 +1138,28 @@ void gpio_direction_output(unsigned short gpio)
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+ AWA_DUMMY_READ(dir);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_direction_output);
+
+/* If we are booting from SPI and our board lacks a strong enough pull up,
+ * the core can reset and execute the bootrom faster than the resistor can
+ * pull the signal logically high. To work around this (common) error in
+ * board design, we explicitly set the pin back to GPIO mode, force /CS
+ * high, and wait for the electrons to do their thing.
+ *
+ * This function only makes sense to be called from reset code, but it
+ * lives here as we need to force all the GPIO states w/out going through
+ * BUG() checks and such.
+ */
+void bfin_gpio_reset_spi0_ssel1(void)
+{
+ u16 gpio = P_IDENT(P_SPI0_SSEL1);
+
+ port_setup(gpio, GPIO_USAGE);
+ gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ udelay(1);
+}
+
+#endif /*BF548_FAMILY */
diff --git a/trunk/arch/blackfin/kernel/bfin_ksyms.c b/trunk/arch/blackfin/kernel/bfin_ksyms.c
index 70455949cfd2..2198afe40f33 100644
--- a/trunk/arch/blackfin/kernel/bfin_ksyms.c
+++ b/trunk/arch/blackfin/kernel/bfin_ksyms.c
@@ -60,6 +60,7 @@ EXPORT_SYMBOL(csum_partial_copy);
* their interface isn't gonna change any time soon now, so
* it's OK to leave it out of version control.
*/
+EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcmp);
diff --git a/trunk/arch/blackfin/kernel/cacheinit.c b/trunk/arch/blackfin/kernel/cacheinit.c
index 4d41a40e8133..62cbba7364b0 100644
--- a/trunk/arch/blackfin/kernel/cacheinit.c
+++ b/trunk/arch/blackfin/kernel/cacheinit.c
@@ -21,9 +21,10 @@
#include
#include
+#include
#include
-#if defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_ICACHE)
void bfin_icache_init(void)
{
unsigned long *table = icplb_table;
@@ -44,7 +45,7 @@ void bfin_icache_init(void)
}
#endif
-#if defined(CONFIG_BLKFIN_DCACHE)
+#if defined(CONFIG_BFIN_DCACHE)
void bfin_dcache_init(void)
{
unsigned long *table = dcplb_table;
diff --git a/trunk/arch/blackfin/kernel/cplbinit.c b/trunk/arch/blackfin/kernel/cplbinit.c
index bbdb403fcb55..f2db6a5e2b5b 100644
--- a/trunk/arch/blackfin/kernel/cplbinit.c
+++ b/trunk/arch/blackfin/kernel/cplbinit.c
@@ -23,6 +23,7 @@
#include
#include
+#include
#include
u_long icplb_table[MAX_CPLBS+1];
@@ -56,7 +57,7 @@ struct s_cplb {
struct cplb_tab switch_d;
};
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
static struct cplb_desc cplb_data[] = {
{
.start = 0,
@@ -230,8 +231,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en
cplb_data[i].psize,
cplb_data[i].i_conf);
} else {
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
- if (i == SDRAM_KERN) {
+#if defined(CONFIG_BFIN_ICACHE)
+ if (ANOMALY_05000263 && i == SDRAM_KERN) {
fill_cplbtab(t,
cplb_data[i].start,
cplb_data[i].end,
diff --git a/trunk/arch/blackfin/kernel/early_printk.c b/trunk/arch/blackfin/kernel/early_printk.c
new file mode 100644
index 000000000000..6ec518a81113
--- /dev/null
+++ b/trunk/arch/blackfin/kernel/early_printk.c
@@ -0,0 +1,214 @@
+/*
+ * File: arch/blackfin/kernel/early_printk.c
+ * Based on: arch/x86_64/kernel/early_printk.c
+ * Author: Robin Getz
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#ifdef CONFIG_SERIAL_BFIN
+extern struct console *bfin_earlyserial_init(unsigned int port,
+ unsigned int cflag);
+#endif
+
+static struct console *early_console;
+
+/* Default console */
+#define DEFAULT_PORT 0
+#define DEFAULT_CFLAG CS8|B57600
+
+/* Default console for early crashes */
+#define DEFAULT_EARLY_PORT "serial,uart0,57600"
+
+#ifdef CONFIG_SERIAL_CORE
+/* What should get here is "0,57600" */
+static struct console * __init earlyserial_init(char *buf)
+{
+ int baud, bit;
+ char parity;
+ unsigned int serial_port = DEFAULT_PORT;
+ unsigned int cflag = DEFAULT_CFLAG;
+
+ serial_port = simple_strtoul(buf, &buf, 10);
+ buf++;
+
+ cflag = 0;
+ baud = simple_strtoul(buf, &buf, 10);
+ switch (baud) {
+ case 1200:
+ cflag |= B1200;
+ break;
+ case 2400:
+ cflag |= B2400;
+ break;
+ case 4800:
+ cflag |= B4800;
+ break;
+ case 9600:
+ cflag |= B9600;
+ break;
+ case 19200:
+ cflag |= B19200;
+ break;
+ case 38400:
+ cflag |= B38400;
+ break;
+ case 115200:
+ cflag |= B115200;
+ break;
+ default:
+ cflag |= B57600;
+ }
+
+ parity = buf[0];
+ buf++;
+ switch (parity) {
+ case 'e':
+ cflag |= PARENB;
+ break;
+ case 'o':
+ cflag |= PARODD;
+ break;
+ }
+
+ bit = simple_strtoul(buf, &buf, 10);
+ switch (bit) {
+ case 5:
+ cflag |= CS5;
+ break;
+ case 6:
+ cflag |= CS5;
+ break;
+ case 7:
+ cflag |= CS5;
+ break;
+ default:
+ cflag |= CS8;
+ }
+
+#ifdef CONFIG_SERIAL_BFIN
+ return bfin_earlyserial_init(serial_port, cflag);
+#else
+ return NULL;
+#endif
+
+}
+#endif
+
+int __init setup_early_printk(char *buf)
+{
+
+ /* Crashing in here would be really bad, so check both the var
+ and the pointer before we start using it
+ */
+ if (!buf)
+ return 0;
+
+ if (!*buf)
+ return 0;
+
+ if (early_console != NULL)
+ return 0;
+
+#ifdef CONFIG_SERIAL_BFIN
+ /* Check for Blackfin Serial */
+ if (!strncmp(buf, "serial,uart", 11)) {
+ buf += 11;
+ early_console = earlyserial_init(buf);
+ }
+#endif
+#ifdef CONFIG_FB
+ /* TODO: add framebuffer console support */
+#endif
+
+ if (likely(early_console)) {
+ early_console->flags |= CON_BOOT;
+
+ register_console(early_console);
+ printk(KERN_INFO "early printk enabled on %s%d\n",
+ early_console->name,
+ early_console->index);
+ }
+
+ return 0;
+}
+
+/*
+ * Set up a temporary Event Vector Table, so if something bad happens before
+ * the kernel is fully started, it doesn't vector off into somewhere we don't
+ * know
+ */
+
+asmlinkage void __init init_early_exception_vectors(void)
+{
+ SSYNC();
+
+ /* cannot program in software:
+ * evt0 - emulation (jtag)
+ * evt1 - reset
+ */
+ bfin_write_EVT2(early_trap);
+ bfin_write_EVT3(early_trap);
+ bfin_write_EVT5(early_trap);
+ bfin_write_EVT6(early_trap);
+ bfin_write_EVT7(early_trap);
+ bfin_write_EVT8(early_trap);
+ bfin_write_EVT9(early_trap);
+ bfin_write_EVT10(early_trap);
+ bfin_write_EVT11(early_trap);
+ bfin_write_EVT12(early_trap);
+ bfin_write_EVT13(early_trap);
+ bfin_write_EVT14(early_trap);
+ bfin_write_EVT15(early_trap);
+ CSYNC();
+
+ /* Set all the return from interupt, exception, NMI to a known place
+ * so if we do a RETI, RETX or RETN by mistake - we go somewhere known
+ * Note - don't change RETS - we are in a subroutine, or
+ * RETE - since it might screw up if emulator is attached
+ */
+ asm("\tRETI = %0; RETX = %0; RETN = %0;\n"
+ : : "p"(early_trap));
+
+}
+
+asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
+{
+ /* This can happen before the uart is initialized, so initialize
+ * the UART now
+ */
+ if (likely(early_console == NULL))
+ setup_early_printk(DEFAULT_EARLY_PORT);
+
+ dump_bfin_regs(fp, retaddr);
+ dump_bfin_trace_buffer();
+
+ panic("Died early");
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/trunk/arch/blackfin/kernel/irqchip.c b/trunk/arch/blackfin/kernel/irqchip.c
index 1fc001c7abda..73647c158774 100644
--- a/trunk/arch/blackfin/kernel/irqchip.c
+++ b/trunk/arch/blackfin/kernel/irqchip.c
@@ -34,6 +34,7 @@
#include
#include
#include
+#include
static unsigned long irq_err_count;
static spinlock_t irq_controller_lock;
@@ -97,9 +98,8 @@ int show_interrupts(struct seq_file *p, void *v)
*/
#ifdef CONFIG_DO_IRQ_L1
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)__attribute__((l1_text));
+__attribute__((l1_text))
#endif
-
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs;
@@ -144,4 +144,12 @@ void __init init_IRQ(void)
}
init_arch_irq();
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ /* Now that evt_ivhw is set up, turn this on */
+ trace_buff_offset = 0;
+ bfin_write_TBUFCTL(BFIN_TRACE_ON);
+ printk(KERN_INFO "Hardware Trace expanded to %ik\n",
+ 1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN);
+#endif
}
diff --git a/trunk/arch/blackfin/kernel/process.c b/trunk/arch/blackfin/kernel/process.c
index 6a7aefe48346..9124467651c4 100644
--- a/trunk/arch/blackfin/kernel/process.c
+++ b/trunk/arch/blackfin/kernel/process.c
@@ -134,31 +134,6 @@ void cpu_idle(void)
}
}
-void machine_restart(char *__unused)
-{
-#if defined(CONFIG_BLKFIN_CACHE)
- bfin_write_IMEM_CONTROL(0x01);
- SSYNC();
-#endif
- bfin_reset();
- /* Dont do anything till the reset occurs */
- while (1) {
- SSYNC();
- }
-}
-
-void machine_halt(void)
-{
- for (;;)
- asm volatile ("idle");
-}
-
-void machine_power_off(void)
-{
- for (;;)
- asm volatile ("idle");
-}
-
void show_regs(struct pt_regs *regs)
{
printk(KERN_NOTICE "\n");
@@ -420,7 +395,8 @@ void finish_atomic_sections (struct pt_regs *regs)
#if defined(CONFIG_ACCESS_CHECK)
int _access_ok(unsigned long addr, unsigned long size)
{
-
+ if (size == 0)
+ return 1;
if (addr > (addr + size))
return 0;
if (segment_eq(get_fs(), KERNEL_DS))
diff --git a/trunk/arch/blackfin/kernel/ptrace.c b/trunk/arch/blackfin/kernel/ptrace.c
index ed800c7456dd..64ce5fea8609 100644
--- a/trunk/arch/blackfin/kernel/ptrace.c
+++ b/trunk/arch/blackfin/kernel/ptrace.c
@@ -44,6 +44,7 @@
#include
#include
#include
+#include
#define MAX_SHARED_LIBS 3
#define TEXT_OFFSET 0
@@ -169,6 +170,9 @@ static inline int is_user_addr_valid(struct task_struct *child,
&& start + len <= (unsigned long)sraml->addr + sraml->length)
return 0;
+ if (start >= FIXED_CODE_START && start + len <= FIXED_CODE_END)
+ return 0;
+
return -EIO;
}
@@ -215,9 +219,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
copied = sizeof(tmp);
} else
#endif
- copied =
- access_process_vm(child, addr + add, &tmp,
- sizeof(tmp), 0);
+ if (addr + add >= FIXED_CODE_START
+ && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
+ memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+ copied = sizeof(tmp);
+ } else
+ copied = access_process_vm(child, addr + add, &tmp,
+ sizeof(tmp), 0);
pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
if (copied != sizeof(tmp))
break;
@@ -281,9 +289,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
copied = sizeof(data);
} else
#endif
- copied =
- access_process_vm(child, addr + add, &data,
- sizeof(data), 1);
+ if (addr + add >= FIXED_CODE_START
+ && addr + add + sizeof(data) <= FIXED_CODE_END) {
+ memcpy((void *)(addr + add), &data, sizeof(data));
+ copied = sizeof(data);
+ } else
+ copied = access_process_vm(child, addr + add, &data,
+ sizeof(data), 1);
pr_debug("ptrace: copied size %d\n", copied);
if (copied != sizeof(data))
break;
diff --git a/trunk/arch/blackfin/kernel/reboot.c b/trunk/arch/blackfin/kernel/reboot.c
new file mode 100644
index 000000000000..356078ec462b
--- /dev/null
+++ b/trunk/arch/blackfin/kernel/reboot.c
@@ -0,0 +1,78 @@
+/*
+ * arch/blackfin/kernel/reboot.c - handle shutdown/reboot
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include
+#include
+#include
+#include
+
+#if defined(BF537_FAMILY) || defined(BF533_FAMILY)
+#define SYSCR_VAL 0x0
+#elif defined(BF561_FAMILY)
+#define SYSCR_VAL 0x20
+#elif defined(BF548_FAMILY)
+#define SYSCR_VAL 0x10
+#endif
+
+/* A system soft reset makes external memory unusable
+ * so force this function into L1.
+ */
+__attribute__((l1_text))
+void bfin_reset(void)
+{
+ /* force BMODE and disable Core B (as needed) */
+ bfin_write_SYSCR(SYSCR_VAL);
+
+ /* we use asm ssync here because it's save and we save some L1 */
+ asm("ssync;");
+
+ while (1) {
+ /* initiate system soft reset with magic 0x7 */
+ bfin_write_SWRST(0x7);
+ asm("ssync;");
+ /* clear system soft reset */
+ bfin_write_SWRST(0);
+ asm("ssync;");
+ /* issue core reset */
+ asm("raise 1");
+ }
+}
+
+__attribute__((weak))
+void native_machine_restart(char *cmd)
+{
+}
+
+void machine_restart(char *cmd)
+{
+ native_machine_restart(cmd);
+ local_irq_disable();
+ bfin_reset();
+}
+
+__attribute__((weak))
+void native_machine_halt(void)
+{
+ idle_with_irq_disabled();
+}
+
+void machine_halt(void)
+{
+ native_machine_halt();
+}
+
+__attribute__((weak))
+void native_machine_power_off(void)
+{
+ idle_with_irq_disabled();
+}
+
+void machine_power_off(void)
+{
+ native_machine_power_off();
+}
diff --git a/trunk/arch/blackfin/kernel/setup.c b/trunk/arch/blackfin/kernel/setup.c
index 88f221b89b33..8dcd76e87ed5 100644
--- a/trunk/arch/blackfin/kernel/setup.c
+++ b/trunk/arch/blackfin/kernel/setup.c
@@ -39,10 +39,12 @@
#include
#include
+#include
#include
#include
#include
#include
+#include
u16 _bfin_swrst;
@@ -66,21 +68,21 @@ char __initdata command_line[COMMAND_LINE_SIZE];
void __init bf53x_cache_init(void)
{
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
generate_cpl_tables();
#endif
-#ifdef CONFIG_BLKFIN_CACHE
+#ifdef CONFIG_BFIN_ICACHE
bfin_icache_init();
printk(KERN_INFO "Instruction Cache Enabled\n");
#endif
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
bfin_dcache_init();
printk(KERN_INFO "Data Cache Enabled"
-# if defined CONFIG_BLKFIN_WB
+# if defined CONFIG_BFIN_WB
" (write-back)"
-# elif defined CONFIG_BLKFIN_WT
+# elif defined CONFIG_BFIN_WT
" (write-through)"
# endif
"\n");
@@ -156,8 +158,10 @@ static __init void parse_cmdline_early(char *cmdline_p)
1;
}
}
+ } else if (!memcmp(to, "earlyprintk=", 12)) {
+ to += 12;
+ setup_early_printk(to);
}
-
}
c = *(to++);
if (!c)
@@ -176,22 +180,36 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ /* setup memory defaults from the user config */
+ physical_mem_end = 0;
+ _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
+
+ parse_cmdline_early(&command_line[0]);
+
cclk = get_cclk();
sclk = get_sclk();
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
- if (cclk == sclk)
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+ if (ANOMALY_05000273 && cclk == sclk)
panic("ANOMALY 05000273, SCLK can not be same as CCLK");
#endif
-#if defined(ANOMALY_05000266)
- bfin_read_IMDMA_D0_IRQ_STATUS();
- bfin_read_IMDMA_D1_IRQ_STATUS();
-#endif
-
-#ifdef DEBUG_SERIAL_EARLY_INIT
- bfin_console_init(); /* early console registration */
- /* this give a chance to get printk() working before crash. */
+#ifdef BF561_FAMILY
+ if (ANOMALY_05000266) {
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+ }
#endif
printk(KERN_INFO "Hardware Trace ");
@@ -212,22 +230,6 @@ void __init setup_arch(char **cmdline_p)
flash_probe();
#endif
-#if defined(CONFIG_CMDLINE_BOOL)
- strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
- command_line[sizeof(command_line) - 1] = 0;
-#endif
-
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
- /* setup memory defaults from the user config */
- physical_mem_end = 0;
- _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
-
- parse_cmdline_early(&command_line[0]);
-
if (physical_mem_end == 0)
physical_mem_end = _ramend;
@@ -260,7 +262,7 @@ void __init setup_arch(char **cmdline_p)
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -289,7 +291,7 @@ void __init setup_arch(char **cmdline_p)
_ebss = memory_mtd_start; /* define _ebss for compatible */
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -334,13 +336,11 @@ void __init setup_arch(char **cmdline_p)
CPU, bfin_revid());
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
- printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
+ printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
cclk / 1000000, sclk / 1000000);
-#if defined(ANOMALY_05000273)
- if ((cclk >> 1) <= sclk)
+ if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-#endif
printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
@@ -535,9 +535,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "I-CACHE:\tOFF\n");
if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))
seq_printf(m, "D-CACHE:\tON"
-#if defined CONFIG_BLKFIN_WB
+#if defined CONFIG_BFIN_WB
" (write-back)"
-#elif defined CONFIG_BLKFIN_WT
+#elif defined CONFIG_BFIN_WT
" (write-through)"
#endif
"\n");
@@ -566,15 +566,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
}
- seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024);
+ seq_printf(m, "I-CACHE Size:\t%dKB\n", BFIN_ICACHESIZE / 1024);
seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size);
seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n",
- BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES);
+ BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
seq_printf(m,
"D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
- dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS,
- BLKFIN_DLINES);
-#ifdef CONFIG_BLKFIN_CACHE_LOCK
+ dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
+ BFIN_DLINES);
+#ifdef CONFIG_BFIN_ICACHE_LOCK
switch (read_iloc()) {
case WAY0_L:
seq_printf(m, "Way0 Locked-Down\n");
diff --git a/trunk/arch/blackfin/kernel/traps.c b/trunk/arch/blackfin/kernel/traps.c
index 792a8416fe10..8823e9ade584 100644
--- a/trunk/arch/blackfin/kernel/traps.c
+++ b/trunk/arch/blackfin/kernel/traps.c
@@ -51,10 +51,9 @@ void __init trap_init(void)
CSYNC();
}
-asmlinkage void trap_c(struct pt_regs *fp);
-
int kstack_depth_to_print = 48;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
static int printk_address(unsigned long address)
{
struct vm_list_struct *vml;
@@ -131,10 +130,22 @@ static int printk_address(unsigned long address)
/* we were unable to find this address anywhere */
return printk("[<0x%p>]", (void *)address);
}
+#endif
+
+asmlinkage void double_fault_c(struct pt_regs *fp)
+{
+ printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+ dump_bfin_regs(fp, (void *)fp->retx);
+ panic("Double Fault - unrecoverable event\n");
+
+}
asmlinkage void trap_c(struct pt_regs *fp)
{
- int j, sig = 0;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+ int j;
+#endif
+ int sig = 0;
siginfo_t info;
unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
@@ -391,10 +402,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
break;
}
- info.si_signo = sig;
- info.si_errno = 0;
- info.si_addr = (void *)fp->pc;
- force_sig_info(sig, &info, current);
if (sig != 0 && sig != SIGTRAP) {
unsigned long stack;
dump_bfin_regs(fp, (void *)fp->retx);
@@ -403,6 +410,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
if (current->mm == NULL)
panic("Kernel exception");
}
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_addr = (void *)fp->pc;
+ force_sig_info(sig, &info, current);
/* if the address that we are about to return to is not valid, set it
* to a valid address, if we have a current application or panic
@@ -429,24 +440,56 @@ asmlinkage void trap_c(struct pt_regs *fp)
/* Typical exception handling routines */
+#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
+
void dump_bfin_trace_buffer(void)
{
- int tflags;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+ int tflags, i = 0;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ int j, index;
+#endif
+
trace_buffer_save(tflags);
+ printk(KERN_EMERG "Hardware Trace:\n");
+
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
- int i;
- printk(KERN_EMERG "Hardware Trace:\n");
- for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
- printk(KERN_EMERG "%2i Target : ", i);
+ for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+ printk(KERN_EMERG "%4i Target : ", i);
printk_address((unsigned long)bfin_read_TBUF());
- printk("\n" KERN_EMERG " Source : ");
+ printk("\n" KERN_EMERG " Source : ");
printk_address((unsigned long)bfin_read_TBUF());
printk("\n");
}
}
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ if (trace_buff_offset)
+ index = trace_buff_offset/4 - 1;
+ else
+ index = EXPAND_LEN;
+
+ j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
+ while (j) {
+ printk(KERN_EMERG "%4i Target : ", i);
+ printk_address(software_trace_buff[index]);
+ index -= 1;
+ if (index < 0 )
+ index = EXPAND_LEN;
+ printk("\n" KERN_EMERG " Source : ");
+ printk_address(software_trace_buff[index]);
+ index -= 1;
+ if (index < 0)
+ index = EXPAND_LEN;
+ printk("\n");
+ j--;
+ i++;
+ }
+#endif
+
trace_buffer_restore(tflags);
+#endif
}
EXPORT_SYMBOL(dump_bfin_trace_buffer);
@@ -510,7 +553,9 @@ void show_stack(struct task_struct *task, unsigned long *stack)
void dump_stack(void)
{
unsigned long stack;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags;
+#endif
trace_buffer_save(tflags);
dump_bfin_trace_buffer();
show_stack(current, &stack);
@@ -559,8 +604,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
unsigned short x = 0;
for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
if (!(i & 0xF))
- printk(KERN_EMERG "\n" KERN_EMERG
- "0x%08x: ", i);
+ printk("\n" KERN_EMERG "0x%08x: ", i);
if (get_user(x, (unsigned short *)i))
break;
@@ -655,6 +699,42 @@ asmlinkage int sys_bfin_spinlock(int *spinlock)
return ret;
}
+int bfin_request_exception(unsigned int exception, void (*handler)(void))
+{
+ void (*curr_handler)(void);
+
+ if (exception > 0x3F)
+ return -EINVAL;
+
+ curr_handler = ex_table[exception];
+
+ if (curr_handler != ex_replaceable)
+ return -EBUSY;
+
+ ex_table[exception] = handler;
+
+ return 0;
+}
+EXPORT_SYMBOL(bfin_request_exception);
+
+int bfin_free_exception(unsigned int exception, void (*handler)(void))
+{
+ void (*curr_handler)(void);
+
+ if (exception > 0x3F)
+ return -EINVAL;
+
+ curr_handler = ex_table[exception];
+
+ if (curr_handler != handler)
+ return -EBUSY;
+
+ ex_table[exception] = ex_replaceable;
+
+ return 0;
+}
+EXPORT_SYMBOL(bfin_free_exception);
+
void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
{
switch (cplb_panic) {
diff --git a/trunk/arch/blackfin/kernel/vmlinux.lds.S b/trunk/arch/blackfin/kernel/vmlinux.lds.S
index fb53780247bc..eec43674a465 100644
--- a/trunk/arch/blackfin/kernel/vmlinux.lds.S
+++ b/trunk/arch/blackfin/kernel/vmlinux.lds.S
@@ -49,7 +49,8 @@ SECTIONS
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
- *(.text.lock)
+ KPROBES_TEXT
+ *(.text.*)
*(.fixup)
. = ALIGN(16);
@@ -61,7 +62,7 @@ SECTIONS
__etext = .;
}
- RODATA
+ RO_DATA(PAGE_SIZE)
.data :
{
@@ -72,50 +73,63 @@ SECTIONS
__sdata = .;
. = ALIGN(THREAD_SIZE);
*(.data.init_task)
- DATA_DATA
- CONSTRUCTORS
. = ALIGN(32);
*(.data.cacheline_aligned)
+ DATA_DATA
+ *(.data.*)
+ CONSTRUCTORS
+
. = ALIGN(THREAD_SIZE);
__edata = .;
}
___init_begin = .;
- .init :
+
+ .init.text :
{
. = ALIGN(PAGE_SIZE);
__sinittext = .;
*(.init.text)
__einittext = .;
+ }
+ .init.data :
+ {
+ . = ALIGN(16);
*(.init.data)
+ }
+ .init.setup :
+ {
. = ALIGN(16);
___setup_start = .;
*(.init.setup)
___setup_end = .;
- ___start___param = .;
- *(__param)
- ___stop___param = .;
+ }
+ .initcall.init :
+ {
___initcall_start = .;
INITCALLS
___initcall_end = .;
+ }
+ .con_initcall.init :
+ {
___con_initcall_start = .;
*(.con_initcall.init)
___con_initcall_end = .;
- ___security_initcall_start = .;
- *(.security_initcall.init)
- ___security_initcall_end = .;
+ }
+ SECURITY_INIT
+ .init.ramfs :
+ {
. = ALIGN(4);
___initramfs_start = .;
*(.init.ramfs)
___initramfs_end = .;
- . = ALIGN(4);
}
__l1_lma_start = .;
- .text_l1 L1_CODE_START : AT(LOADADDR(.init) + SIZEOF(.init))
+ .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
{
. = ALIGN(4);
__stext_l1 = .;
@@ -164,13 +178,19 @@ SECTIONS
{
. = ALIGN(4);
___bss_start = .;
- *(.bss)
+ *(.bss .bss.*)
*(COMMON)
. = ALIGN(4);
___bss_stop = .;
__end = .;
}
+ STABS_DEBUG
+
+ DWARF_DEBUG
+
+ NOTES
+
/DISCARD/ :
{
*(.exit.text)
diff --git a/trunk/arch/blackfin/lib/memcmp.S b/trunk/arch/blackfin/lib/memcmp.S
index b88c5d2d1ebe..219fa2877c62 100644
--- a/trunk/arch/blackfin/lib/memcmp.S
+++ b/trunk/arch/blackfin/lib/memcmp.S
@@ -61,7 +61,7 @@ ENTRY(_memcmp)
LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
.Lquad_loop_s:
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
R0 = [P0++];
R1 = [I0++];
#else
diff --git a/trunk/arch/blackfin/lib/memcpy.S b/trunk/arch/blackfin/lib/memcpy.S
index 14a5585bbd02..2e6336492b4b 100644
--- a/trunk/arch/blackfin/lib/memcpy.S
+++ b/trunk/arch/blackfin/lib/memcpy.S
@@ -98,7 +98,7 @@ ENTRY(_memcpy)
R0 = R1;
I1 = P1;
R3 = [I1++];
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lword_loops:
[P0++] = R3;
.Lword_loope:
diff --git a/trunk/arch/blackfin/lib/memmove.S b/trunk/arch/blackfin/lib/memmove.S
index 6ee6e206e77c..33f8653145b7 100644
--- a/trunk/arch/blackfin/lib/memmove.S
+++ b/trunk/arch/blackfin/lib/memmove.S
@@ -70,7 +70,7 @@ ENTRY(_memmove)
R1 = [I0++];
LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1;
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lquad_loops:
[P0++] = R1;
.Lquad_loope:
@@ -102,7 +102,7 @@ ENTRY(_memmove)
R1 = B[P3--] (Z);
CC = P2 == 0;
IF CC JUMP .Lno_loop;
-#ifdef ANOMALY_05000245
+#if ANOMALY_05000245
NOP;
NOP;
#endif
diff --git a/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c b/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 4545f363e641..a57b52d207cd 100644
--- a/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -34,7 +34,9 @@
#include
#include
#include
+#include
#include
+#include
#include
/*
@@ -93,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -101,7 +103,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, {
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 2, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -110,24 +112,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -227,6 +245,43 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 38
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2030C000,
+ .end = 0x2030C01F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2030D018,
+ .end = 0x2030D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *cm_bf533_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
@@ -250,7 +305,11 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
#endif
};
@@ -261,6 +320,10 @@ static int __init cm_bf533_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/trunk/arch/blackfin/mach-bf533/boards/ezkit.c b/trunk/arch/blackfin/mach-bf533/boards/ezkit.c
index 0000b8f1239c..5c1e35d3c012 100644
--- a/trunk/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/trunk/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -35,7 +35,9 @@
#include
#include
#include
+#include
#include
+#include
#include
/*
@@ -50,6 +52,12 @@ static struct platform_device rtc_device = {
};
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
+};
+#endif
+
/*
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
@@ -131,7 +139,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -143,7 +151,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -154,24 +162,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -193,13 +217,54 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
@@ -209,6 +274,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init ezkit_init(void)
@@ -218,6 +287,10 @@ static int __init ezkit_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/trunk/arch/blackfin/mach-bf533/boards/stamp.c b/trunk/arch/blackfin/mach-bf533/boards/stamp.c
index a9143c4cbdcd..8975e06ea158 100644
--- a/trunk/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/trunk/arch/blackfin/mach-bf533/boards/stamp.c
@@ -37,8 +37,11 @@
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include
#endif
+#include
#include
+#include
#include
+#include
/*
* Name the Board for the /proc/cpuinfo
@@ -77,6 +80,12 @@ static struct platform_device smc91x_device = {
};
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
+};
+#endif
+
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
static struct resource net2272_bfin_resources[] = {
{
@@ -177,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -189,7 +198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -200,7 +209,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -210,7 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -219,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -231,16 +240,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
@@ -250,7 +259,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad5304_spi",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 2,
.platform_data = NULL,
.controller_data = &ad5304_chip_info,
@@ -259,17 +268,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -309,6 +334,43 @@ static struct platform_device bfin_sport1_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -318,12 +380,16 @@ static struct platform_device *stamp_devices[] __initdata = {
&smc91x_device,
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
+#endif
+
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
@@ -334,6 +400,10 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init stamp_init(void)
@@ -355,8 +425,23 @@ static int __init stamp_init(void)
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
+ return 0;
}
arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
+# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
+ bfin_write_FIO_INEN(~BIT_TO_SET);
+ bfin_write_FIO_DIR(BIT_TO_SET);
+ bfin_write_FIO_FLAG_C(BIT_TO_SET);
+#endif
+}
diff --git a/trunk/arch/blackfin/mach-bf533/head.S b/trunk/arch/blackfin/mach-bf533/head.S
index 7dd0e9c3a936..1ded945a6fa0 100644
--- a/trunk/arch/blackfin/mach-bf533/head.S
+++ b/trunk/arch/blackfin/mach-bf533/head.S
@@ -32,11 +32,9 @@
#include
#include
#if CONFIG_BFIN_KERNEL_CLOCK
+#include
#include
#endif
-#if CONFIG_DEBUG_KERNEL_START
-#include
-#endif
.global __rambase
.global __ramstart
@@ -52,10 +50,12 @@ __INIT
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register:
- * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
- */
- R0 = 0x36;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
SYSCFG = R0;
R0 = 0;
@@ -97,40 +97,10 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
-#if CONFIG_DEBUG_KERNEL_START
-
-/*
- * Set up a temporary Event Vector Table, so if something bad happens before
- * the kernel is fully started, it doesn't vector off into the bootloaders
- * table
- */
- P0.l = lo(EVT2);
- P0.h = hi(EVT2);
- P1.l = lo(EVT15);
- P1.h = hi(EVT15);
- P2.l = debug_kernel_start_trap;
- P2.h = debug_kernel_start_trap;
-
- RTS = P2;
- RTI = P2;
- RTX = P2;
- RTN = P2;
- RTE = P2;
-
-.Lfill_temp_vector_table:
- [P0++] = P2; /* Core Event Vector Table */
- CC = P0 == P1;
- if !CC JUMP .Lfill_temp_vector_table
- P0 = r0;
- P1 = r0;
- P2 = r0;
-
-#endif
-
p0.h = hi(FIO_MASKA_C);
p0.l = lo(FIO_MASKA_C);
r0 = 0xFFFF(Z);
@@ -144,38 +114,38 @@ ENTRY(__start)
ssync;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -211,6 +181,12 @@ ENTRY(__start)
fp = sp;
usp = sp;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -264,7 +240,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -417,8 +393,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -456,276 +432,6 @@ ENTRY(_start_dma_code)
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
- p0.h = hi(FIO_INEN);
- p0.l = lo(FIO_INEN);
- r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_DIR);
- p0.l = lo(FIO_DIR);
- r0.l = (1 << CONFIG_ENET_FLASH_PIN);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_FLAG_C);
- p0.l = lo(FIO_FLAG_C);
- r0.l = (1 << CONFIG_ENET_FLASH_PIN);
- w[p0] = r0.l;
-#endif
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* make sure SYSCR is set to use BMODE */
- P0.h = hi(SYSCR);
- P0.l = lo(SYSCR);
- R0.l = 0x0;
- W[P0] = R0.l;
- SSYNC;
-
- /* issue a system soft reset */
- P1.h = hi(SWRST);
- P1.l = lo(SWRST);
- R1.l = 0x0007;
- W[P1] = R1;
- SSYNC;
-
- /* clear system soft reset */
- R0.l = 0x0000;
- W[P0] = R0;
- SSYNC;
-
- /* issue core reset */
- raise 1;
-
- RTS;
-ENDPROC(_bfin_reset)
-
-#if CONFIG_DEBUG_KERNEL_START
-debug_kernel_start_trap:
- /* Set up a temp stack in L1 - SDRAM might not be working */
- P0.L = lo(L1_DATA_A_START + 0x100);
- P0.H = hi(L1_DATA_A_START + 0x100);
- SP = P0;
-
- /* Make sure the Clocks are the way I think they should be */
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again1:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again1;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- /* Make sure UART is enabled - you can never be sure */
-
-/*
- * Setup for console. Argument comes from the menuconfig
- */
-
-#ifdef CONFIG_BAUD_9600
-#define CONSOLE_BAUD_RATE 9600
-#elif CONFIG_BAUD_19200
-#define CONSOLE_BAUD_RATE 19200
-#elif CONFIG_BAUD_38400
-#define CONSOLE_BAUD_RATE 38400
-#elif CONFIG_BAUD_57600
-#define CONSOLE_BAUD_RATE 57600
-#elif CONFIG_BAUD_115200
-#define CONSOLE_BAUD_RATE 115200
-#endif
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x00(Z);
- w[p0] = r0.L; /* To Turn off UART clocks */
- ssync;
-
- p0.h = hi(UART_LCR);
- p0.l = lo(UART_LCR);
- r0 = 0x83(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));
-
- p0.h = hi(UART_DLL);
- p0.l = lo(UART_DLL);
- r0 = 0xFF(Z);
- r0 = R1 & R0;
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(UART_DLH);
- p0.l = lo(UART_DLH);
- r1 >>= 8 ;
- w[p0] = r1.L;
- ssync;
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- p0.h = hi(UART_LCR);
- p0.l = lo(UART_LCR);
- r0 = 0x03(Z);
- w[p0] = r0.L; /* To Turn on UART */
- ssync;
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x01(Z);
- w[p0] = r0.L; /* To Turn on UART Clocks */
- ssync;
-
- P0.h = hi(UART_THR);
- P0.l = lo(UART_THR);
- P1.h = hi(UART_LSR);
- P1.l = lo(UART_LSR);
-
- R0.L = 'K';
- call .Lwait_char;
- R0.L='e';
- call .Lwait_char;
- R0.L='r';
- call .Lwait_char;
- R0.L='n'
- call .Lwait_char;
- R0.L='e'
- call .Lwait_char;
- R0.L='l';
- call .Lwait_char;
- R0.L=' ';
- call .Lwait_char;
- R0.L='c';
- call .Lwait_char;
- R0.L='r';
- call .Lwait_char;
- R0.L='a';
- call .Lwait_char;
- R0.L='s';
- call .Lwait_char;
- R0.L='h';
- call .Lwait_char;
- R0.L='\r';
- call .Lwait_char;
- R0.L='\n';
- call .Lwait_char;
-
- R0.L='S';
- call .Lwait_char;
- R0.L='E';
- call .Lwait_char;
- R0.L='Q'
- call .Lwait_char;
- R0.L='S'
- call .Lwait_char;
- R0.L='T';
- call .Lwait_char;
- R0.L='A';
- call .Lwait_char;
- R0.L='T';
- call .Lwait_char;
- R0.L='=';
- call .Lwait_char;
- R2 = SEQSTAT;
- call .Ldump_reg;
-
- R0.L=' ';
- call .Lwait_char;
- R0.L='R';
- call .Lwait_char;
- R0.L='E'
- call .Lwait_char;
- R0.L='T'
- call .Lwait_char;
- R0.L='X';
- call .Lwait_char;
- R0.L='=';
- call .Lwait_char;
- R2 = RETX;
- call .Ldump_reg;
-
- R0.L='\r';
- call .Lwait_char;
- R0.L='\n';
- call .Lwait_char;
-
-.Ldebug_kernel_start_trap_done:
- JUMP .Ldebug_kernel_start_trap_done;
-.Ldump_reg:
- R3 = 32;
- R4 = 0x0F;
- R5 = ':'; /* one past 9 */
-
-.Ldump_reg2:
- R0 = R2;
- R3 += -4;
- R0 >>>= R3;
- R0 = R0 & R4;
- R0 += 0x30;
- CC = R0 <= R5;
- if CC JUMP .Ldump_reg1;
- R0 += 7;
-
-.Ldump_reg1:
- R1.l = W[P1];
- CC = BITTST(R1, 5);
- if !CC JUMP .Ldump_reg1;
- W[P0] = r0;
-
- CC = R3 == 0;
- if !CC JUMP .Ldump_reg2
- RTS;
-
-.Lwait_char:
- R1.l = W[P1];
- CC = BITTST(R1, 5);
- if !CC JUMP .Lwait_char;
- W[P0] = r0;
- RTS;
-
-#endif /* CONFIG_DEBUG_KERNEL_START */
-
.data
/*
diff --git a/trunk/arch/blackfin/mach-bf537/Kconfig b/trunk/arch/blackfin/mach-bf537/Kconfig
index cc9ae38a4dda..e6648db09519 100644
--- a/trunk/arch/blackfin/mach-bf537/Kconfig
+++ b/trunk/arch/blackfin/mach-bf537/Kconfig
@@ -2,33 +2,6 @@ if (BF537 || BF534 || BF536)
menu "BF537 Specific Configuration"
-comment "PORT F/G Selection"
-choice
- prompt "Select BF537/6/4 default GPIO PFx PORTx"
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTF.
-
-config BF537_PORT_F
- bool "Select BF537/6/4 default GPIO PFx PORTF"
- depends on (BF537 || BF536 || BF534)
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTF.
-
-config BF537_PORT_G
- bool "Select BF537/6/4 default GPIO PFx PORTG"
- depends on (BF537 || BF536 || BF534)
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTG.
-
-config BF537_PORT_H
- bool "Select BF537/6/4 default GPIO PFx PORTH"
- depends on (BF537 || BF536 || BF534)
- help
- Quick Hack for BF537/6/4 default GPIO PFx PORTH
- Use only when Blackfin EMAC support is not required.
-
-endchoice
-
comment "Interrupt Priority Assignment"
menu "Priority"
diff --git a/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c b/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c
index a8f947b72754..44dea05e1d03 100644
--- a/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -35,7 +35,9 @@
#include
#include
#include
+#include
#include
+#include
#include
/*
@@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 64
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2030C000,
+ .end = 0x2030C01F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2030D018,
+ .end = 0x2030D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *cm_bf537_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
#endif
};
@@ -358,6 +417,10 @@ static int __init cm_bf537_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/trunk/arch/blackfin/mach-bf537/boards/generic_board.c b/trunk/arch/blackfin/mach-bf537/boards/generic_board.c
index 648d984e98d6..5e9d09eb8579 100644
--- a/trunk/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/trunk/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -8,7 +8,7 @@
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -34,20 +34,74 @@
#include
#include
#include
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include
+#endif
+#include
#include
+#include
#include
+#include
#include
+#include
+#include
/*
* Name the Board for the /proc/cpuinfo
*/
-char *bfin_board_name = "UNKNOWN BOARD";
+char *bfin_board_name = "GENERIC Board";
/*
* Driver needs to know address, irq and flag pin.
*/
+#define ISP1761_BASE 0x203C0000
+#define ISP1761_IRQ IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+ [0] = {
+ .name = "isp1761-regs",
+ .start = ISP1761_BASE + 0x00000000,
+ .end = ISP1761_BASE + 0x000fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ISP1761_IRQ,
+ .end = ISP1761_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_isp1761_device = {
+ .name = "isp1761",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_isp1761_resources),
+ .resource = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+ &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+ return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+ platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
{
@@ -58,10 +112,6 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PROG_INTA,
- .end = IRQ_PROG_INTA,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
}, {
.start = IRQ_PF4,
.end = IRQ_PF4,
@@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = {
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- /*
- * denotes the flag pin and is used directly if
- * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
- */
+
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -117,6 +160,28 @@ static struct platform_device smc91x_device = {
};
#endif
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = 0x203FB800,
+ .end = 0x203FB800 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+#endif
+
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
@@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = {
.end = 0x20340004,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PROG_INTA,
- .end = IRQ_PROG_INTA,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
- .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
+ .start = CONFIG_USB_SL811_BFIN_IRQ,
+ .end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
@@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = {
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
- unsigned short mask = (1<
#endif
#include
+#include
#include
#include
@@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = {
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
- unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
- bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+ gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+ gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
if (is_on)
- bfin_write_FIO_FLAG_S(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
else
- bfin_write_FIO_FLAG_C(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
}
#endif
@@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
+ .name = "bf537-lq035",
};
#endif
@@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
diff --git a/trunk/arch/blackfin/mach-bf537/boards/stamp.c b/trunk/arch/blackfin/mach-bf537/boards/stamp.c
index 9c43d7756510..47d7d4a0e73d 100644
--- a/trunk/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/trunk/arch/blackfin/mach-bf537/boards/stamp.c
@@ -37,10 +37,13 @@
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include
#endif
+#include
#include
#include
#include
+#include
#include
+#include
#include
/*
@@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = {
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
- unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
- bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+ gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+ gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
if (is_on)
- bfin_write_FIO_FLAG_S(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
else
- bfin_write_FIO_FLAG_C(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
}
#endif
@@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
@@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad5304_spi",
.max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 2,
.platform_data = NULL,
.controller_data = &ad5304_chip_info,
@@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
};
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
+ .name = "bf537-lq035",
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
};
#endif
@@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = {
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device i2c_bfin_twi_device = {
.name = "i2c-bfin-twi",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
};
#endif
@@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
@@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
@@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init stamp_init(void)
@@ -632,7 +715,18 @@ static int __init stamp_init(void)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+ /* workaround reboot hang when booting from SPI */
+ if ((bfin_read_SYSCR() & 0x7) == 0x3)
+ bfin_gpio_reset_spi0_ssel1();
+}
diff --git a/trunk/arch/blackfin/mach-bf537/head.S b/trunk/arch/blackfin/mach-bf537/head.S
index 429c8a1019da..3014fe8dd155 100644
--- a/trunk/arch/blackfin/mach-bf537/head.S
+++ b/trunk/arch/blackfin/mach-bf537/head.S
@@ -33,6 +33,7 @@
#include
#if CONFIG_BFIN_KERNEL_CLOCK
+#include
#include
#endif
@@ -50,10 +51,12 @@ __INIT
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register:
- * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
- */
- R0 = 0x36;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
SYSCFG = R0;
R0 = 0;
@@ -95,43 +98,43 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -141,12 +144,12 @@ ENTRY(__start)
*/
p0.h = hi(BFIN_PORT_MUX);
p0.l = lo(BFIN_PORT_MUX);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = (PGDE_UART | PFTE_UART)(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -155,12 +158,12 @@ ENTRY(__start)
p0.h = hi(PORTF_FER);
p0.l = lo(PORTF_FER);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = 0x000F(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -221,6 +224,12 @@ ENTRY(__start)
fp = sp;
usp = sp;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -274,7 +283,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -436,8 +445,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -475,85 +484,6 @@ ENTRY(_start_dma_code)
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_MTD_M25P80)
- /*
- * The following code fix the SPI flash reboot issue,
- * /CS signal of the chip which is using PF10 return to GPIO mode
- */
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
- r0.l = 0x0000;
- w[p0] = r0.l;
- SSYNC;
-
- /* /CS return to high */
- p0.h = hi(PORTFIO);
- p0.l = lo(PORTFIO);
- r0.l = 0xFFFF;
- w[p0] = r0.l;
- SSYNC;
-
- /* Delay some time, This is necessary */
- r1.h = 0;
- r1.l = 0x400;
- p1 = r1;
- lsetup (.L_delay_lab1, .L_delay_lab1_end) lc1 = p1;
-.L_delay_lab1:
- r0.h = 0;
- r0.l = 0x8000;
- p0 = r0;
- lsetup (.L_delay_lab0, .L_delay_lab0_end) lc0 = p0;
-.L_delay_lab0:
- nop;
-.L_delay_lab0_end:
- nop;
-.L_delay_lab1_end:
- nop;
-#endif
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* make sure SYSCR is set to use BMODE */
- P0.h = hi(SYSCR);
- P0.l = lo(SYSCR);
- R0.l = 0x0;
- W[P0] = R0.l;
- SSYNC;
-
- /* issue a system soft reset */
- P1.h = hi(SWRST);
- P1.l = lo(SWRST);
- R1.l = 0x0007;
- W[P1] = R1;
- SSYNC;
-
- /* clear system soft reset */
- R0.l = 0x0000;
- W[P0] = R0;
- SSYNC;
-
- /* issue core reset */
- raise 1;
-
- RTS;
-ENDPROC(_bfin_reset)
-
.data
/*
diff --git a/trunk/arch/blackfin/mach-bf548/Kconfig b/trunk/arch/blackfin/mach-bf548/Kconfig
index e78b03d56c7c..08d8dc83701c 100644
--- a/trunk/arch/blackfin/mach-bf548/Kconfig
+++ b/trunk/arch/blackfin/mach-bf548/Kconfig
@@ -2,6 +2,13 @@ if (BF54x)
menu "BF548 Specific Configuration"
+config DEB_DMA_URGENT
+ bool "DMA has priority over core for ext. accesses"
+ depends on BF54x
+ default n
+ help
+ Treat any DEB1, DEB2 and DEB3 request as Urgent
+
comment "Interrupt Priority Assignment"
menu "Priority"
@@ -282,7 +289,7 @@ menu "Assignment"
config PINTx_REASSIGN
bool "Reprogram PINT Assignment"
- default n
+ default y
help
The interrupt assignment registers controls the pin-to-interrupt
assignment in a byte-wide manner. Each option allows you to select
@@ -303,7 +310,7 @@ config PINT1_ASSIGN
config PINT2_ASSIGN
hex "PINT2_ASSIGN"
depends on PINTx_REASSIGN
- default 0x00000101
+ default 0x07000101
config PINT3_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
diff --git a/trunk/arch/blackfin/mach-bf548/Makefile b/trunk/arch/blackfin/mach-bf548/Makefile
index 060ad78ebf1d..7e7c9c8ac5b2 100644
--- a/trunk/arch/blackfin/mach-bf548/Makefile
+++ b/trunk/arch/blackfin/mach-bf548/Makefile
@@ -4,6 +4,6 @@
extra-y := head.o
-obj-y := ints-priority.o dma.o gpio.o
+obj-y := ints-priority.o dma.o
obj-$(CONFIG_CPU_FREQ) += cpu.o
diff --git a/trunk/arch/blackfin/mach-bf548/boards/ezkit.c b/trunk/arch/blackfin/mach-bf548/boards/ezkit.c
index 96ad95fab1a8..2c47db494f7d 100644
--- a/trunk/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/trunk/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -35,9 +35,16 @@
#include
#include
#include
-#include
#include
+#include
#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
/*
* Name the Board for the /proc/cpuinfo
@@ -48,6 +55,88 @@ char *bfin_board_name = "ADSP-BF548-EZKIT";
* Driver needs to know address, irq and flag pin.
*/
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+
+#include
+
+static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
+ .width = 480,
+ .height = 272,
+ .xres = {480, 480, 480},
+ .yres = {272, 272, 272},
+ .bpp = {24, 24, 24},
+ .disp = GPIO_PE3,
+};
+
+static struct resource bf54x_lq043_resources[] = {
+ {
+ .start = IRQ_EPPI0_ERR,
+ .end = IRQ_EPPI0_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf54x_lq043_device = {
+ .name = "bf54x-lq043",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bf54x_lq043_resources),
+ .resource = bf54x_lq043_resources,
+ .dev = {
+ .platform_data = &bf54x_lq043_data,
+ },
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+static int bf548_keymap[] = {
+ KEYVAL(0, 0, KEY_ENTER),
+ KEYVAL(0, 1, KEY_HELP),
+ KEYVAL(0, 2, KEY_0),
+ KEYVAL(0, 3, KEY_BACKSPACE),
+ KEYVAL(1, 0, KEY_TAB),
+ KEYVAL(1, 1, KEY_9),
+ KEYVAL(1, 2, KEY_8),
+ KEYVAL(1, 3, KEY_7),
+ KEYVAL(2, 0, KEY_DOWN),
+ KEYVAL(2, 1, KEY_6),
+ KEYVAL(2, 2, KEY_5),
+ KEYVAL(2, 3, KEY_4),
+ KEYVAL(3, 0, KEY_UP),
+ KEYVAL(3, 1, KEY_3),
+ KEYVAL(3, 2, KEY_2),
+ KEYVAL(3, 3, KEY_1),
+};
+
+static struct bfin_kpad_platform_data bf54x_kpad_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = bf548_keymap,
+ .keymapsize = ARRAY_SIZE(bf548_keymap),
+ .repeat = 0,
+ .debounce_time = 5000, /* ns (5ms) */
+ .coldrive_time = 1000, /* ns (1ms) */
+ .keyup_test_interval = 50, /* ms (50ms) */
+};
+
+static struct resource bf54x_kpad_resources[] = {
+ {
+ .start = IRQ_KEY,
+ .end = IRQ_KEY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf54x_kpad_device = {
+ .name = "bf54x-keys",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bf54x_kpad_resources),
+ .resource = bf54x_kpad_resources,
+ .dev = {
+ .platform_data = &bf54x_kpad_data,
+ },
+};
+#endif
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
@@ -94,6 +183,344 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource smsc911x_resources[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = 0x24000000,
+ .end = 0x24000000 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PE8,
+ .end = IRQ_PE8,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
+static struct resource bf54x_hcd_resources[] = {
+ {
+ .start = 0xFFC03C00,
+ .end = 0xFFC040FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bf54x_hcd = {
+ .name = "bf54x-hcd",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf54x_hcd_resources),
+ .resource = bf54x_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+ [0] = {
+ .start = 0xFFC03C00,
+ .end = 0xFFC040FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* general IRQ */
+ .start = IRQ_USB_INT0,
+ .end = IRQ_USB_INT0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+ [2] = { /* DMA IRQ */
+ .start = IRQ_USB_DMA,
+ .end = IRQ_USB_DMA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#ifdef CONFIG_USB_MUSB_OTG
+ .mode = MUSB_OTG,
+#elif CONFIG_USB_MUSB_HDRC_HCD
+ .mode = MUSB_HOST,
+#elif CONFIG_USB_GADGET_MUSB_HDRC
+ .mode = MUSB_PERIPHERAL,
+#endif
+ .multipoint = 1,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+ .name = "musb_hdrc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &musb_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &musb_plat,
+ },
+ .num_resources = ARRAY_SIZE(musb_resources),
+ .resource = musb_resources,
+};
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+static struct resource bfin_atapi_resources[] = {
+ {
+ .start = 0xFFC03800,
+ .end = 0xFFC0386F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ATAPI_ERR,
+ .end = IRQ_ATAPI_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_atapi_device = {
+ .name = "pata-bf54x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_atapi_resources),
+ .resource = bfin_atapi_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+ {
+ .name = "Linux Kernel",
+ .offset = 0,
+ .size = 4 * SIZE_1M,
+ },
+ {
+ .name = "File System",
+ .offset = 4 * SIZE_1M,
+ .size = (256 - 4) * SIZE_1M,
+ },
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+ .page_size = NFC_PG_SIZE_256,
+ .data_width = NFC_NWIDTH_8,
+ .partitions = partition_info,
+ .nr_partitions = ARRAY_SIZE(partition_info),
+ .rd_dly = 3,
+ .wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+ {
+ .start = 0xFFC03B00,
+ .end = 0xFFC03B4F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CH_NFC,
+ .end = CH_NFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf5xx_nand_device = {
+ .name = "bf5xx-nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+ .resource = bf5xx_nand_resources,
+ .dev = {
+ .platform_data = &bf5xx_nand_platform,
+ },
+};
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+static struct platform_device bf54x_sdh_device = {
+ .name = "bfin-sdh",
+ .id = 0,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+/* SPI flash chip (m25p16) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel",
+ .size = 0x1c0000,
+ .offset = 0x40000
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p16",
+};
+
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+ .cs_change_per_word = 0,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .cs_change_per_word = 1,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* SPI_SSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+{
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PJ11,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2,
+ .controller_data = &spi_ad7877_chip_info,
+},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI0,
+ .end = CH_SPI0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI (1) */
+static struct resource bfin_spi1_resource[] = {
+ [0] = {
+ .start = SPI1_REGBASE,
+ .end = SPI1_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI1,
+ .end = CH_SPI1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf54x_spi_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device bf54x_spi_master0 = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ },
+};
+
+static struct platform_device bf54x_spi_master1 = {
+ .name = "bfin-spi",
+ .id = 1, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi1_resource),
+ .resource = bfin_spi1_resource,
+ .dev = {
+ .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI0,
+ .end = IRQ_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+
+static struct resource bfin_twi1_resource[] = {
+ [0] = {
+ .start = TWI1_REGBASE,
+ .end = TWI1_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI1,
+ .end = IRQ_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi1_device = {
+ .name = "i2c-bfin-twi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_twi1_resource),
+ .resource = bfin_twi1_resource,
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -102,12 +529,60 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+ &bf54x_lq043_device,
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+ &smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
+ &bf54x_hcd,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+ &musb_device,
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+ &bfin_atapi_device,
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+ &bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+ &bf54x_sdh_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bf54x_spi_master0,
+/* &bf54x_spi_master1,*/
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+ &bf54x_kpad_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi0_device,
+ &i2c_bfin_twi1_device,
+#endif
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bf54x_spi_board_info,
+ ARRAY_SIZE(bf54x_spi_board_info));
+#endif
+
return 0;
}
diff --git a/trunk/arch/blackfin/mach-bf548/gpio.c b/trunk/arch/blackfin/mach-bf548/gpio.c
deleted file mode 100644
index 0da5f0003b8c..000000000000
--- a/trunk/arch/blackfin/mach-bf548/gpio.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf548/gpio.c
- * Based on:
- * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
- *
- * Created:
- * Description: GPIO Abstraction Layer
- *
- * Modified:
- * Copyright 2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-
-static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
- (struct gpio_port_t *)PORTA_FER,
- (struct gpio_port_t *)PORTB_FER,
- (struct gpio_port_t *)PORTC_FER,
- (struct gpio_port_t *)PORTD_FER,
- (struct gpio_port_t *)PORTE_FER,
- (struct gpio_port_t *)PORTF_FER,
- (struct gpio_port_t *)PORTG_FER,
- (struct gpio_port_t *)PORTH_FER,
- (struct gpio_port_t *)PORTI_FER,
- (struct gpio_port_t *)PORTJ_FER,
-};
-
-static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
-static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
-inline int check_gpio(unsigned short gpio)
-{
- if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
- || gpio == GPIO_PH14 || gpio == GPIO_PH15
- || gpio == GPIO_PJ14 || gpio == GPIO_PJ15
- || gpio > MAX_BLACKFIN_GPIOS)
- return -EINVAL;
- return 0;
-}
-
-inline void portmux_setup(unsigned short portno, unsigned short function)
-{
- u32 pmux;
-
- pmux = gpio_array[gpio_bank(portno)]->port_mux;
-
- pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
- pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
-
- gpio_array[gpio_bank(portno)]->port_mux = pmux;
-
-}
-
-inline u16 get_portmux(unsigned short portno)
-{
- u32 pmux;
-
- pmux = gpio_array[gpio_bank(portno)]->port_mux;
-
- return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
-
-}
-
-static void port_setup(unsigned short gpio, unsigned short usage)
-{
- if (usage == GPIO_USAGE) {
- if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio))
- printk(KERN_WARNING
- "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
- gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
- } else
- gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
- SSYNC();
-}
-
-static int __init bfin_gpio_init(void)
-{
- printk(KERN_INFO "Blackfin GPIO Controller\n");
-
- return 0;
-}
-
-arch_initcall(bfin_gpio_init);
-
-int peripheral_request(unsigned short per, const char *label)
-{
- unsigned long flags;
- unsigned short ident = P_IDENT(per);
-
- if (!(per & P_DEFINED))
- return -ENODEV;
-
- if (check_gpio(ident) < 0)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
- printk(KERN_ERR
- "%s: Peripheral %d is already reserved as GPIO!\n",
- __FUNCTION__, per);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
-
- u16 funct = get_portmux(ident);
-
- if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
- printk(KERN_ERR
- "%s: Peripheral %d is already reserved!\n",
- __FUNCTION__, per);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
- }
-
- reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
-
- portmux_setup(ident, P_FUNCT2MUX(per));
- port_setup(ident, PERIPHERAL_USAGE);
-
- local_irq_restore(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(peripheral_request);
-
-int peripheral_request_list(unsigned short per[], const char *label)
-{
-
- u16 cnt;
- int ret;
-
- for (cnt = 0; per[cnt] != 0; cnt++) {
- ret = peripheral_request(per[cnt], label);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(peripheral_request_list);
-
-void peripheral_free(unsigned short per)
-{
- unsigned long flags;
- unsigned short ident = P_IDENT(per);
-
- if (!(per & P_DEFINED))
- return;
-
- if (check_gpio(ident) < 0)
- return;
-
- local_irq_save(flags);
-
- if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
- printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per);
- dump_stack();
- local_irq_restore(flags);
- return;
- }
-
- if (!(per & P_MAYSHARE)) {
- port_setup(ident, GPIO_USAGE);
- }
-
- reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
-
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(peripheral_free);
-
-void peripheral_free_list(unsigned short per[])
-{
- u16 cnt;
-
- for (cnt = 0; per[cnt] != 0; cnt++) {
- peripheral_free(per[cnt]);
- }
-
-}
-EXPORT_SYMBOL(peripheral_free_list);
-
-/***********************************************************
-*
-* FUNCTIONS: Blackfin GPIO Driver
-*
-* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-*
-*
-* DESCRIPTION: Blackfin GPIO Driver API
-*
-* CAUTION:
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-
-int gpio_request(unsigned short gpio, const char *label)
-{
- unsigned long flags;
-
- if (check_gpio(gpio) < 0)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR
- "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio);
- dump_stack();
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-
- local_irq_restore(flags);
-
- port_setup(gpio, GPIO_USAGE);
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned short gpio)
-{
- unsigned long flags;
-
- if (check_gpio(gpio) < 0)
- return;
-
- local_irq_save(flags);
-
- if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
- dump_stack();
- local_irq_restore(flags);
- return;
- }
-
- reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_free);
-
-void gpio_direction_input(unsigned short gpio)
-{
- unsigned long flags;
-
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
-
- local_irq_save(flags);
- gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
- gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-void gpio_direction_output(unsigned short gpio)
-{
- unsigned long flags;
-
- BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
-
- local_irq_save(flags);
- gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
- gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-void gpio_set_value(unsigned short gpio, unsigned short arg)
-{
- if (arg)
- gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
-
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-unsigned short gpio_get_value(unsigned short gpio)
-{
- return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
-}
-EXPORT_SYMBOL(gpio_get_value);
diff --git a/trunk/arch/blackfin/mach-bf548/head.S b/trunk/arch/blackfin/mach-bf548/head.S
index 06751ae8b857..3071c243d426 100644
--- a/trunk/arch/blackfin/mach-bf548/head.S
+++ b/trunk/arch/blackfin/mach-bf548/head.S
@@ -31,6 +31,7 @@
#include
#include
#if CONFIG_BFIN_KERNEL_CLOCK
+#include
#include
#endif
@@ -49,9 +50,13 @@ ENTRY(__start)
ENTRY(__stext)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register */
- R0 = 0x36;
- SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+ SYSCFG = R0;
R0 = 0;
/* Clear Out All the data and pointer Registers*/
@@ -92,13 +97,13 @@ ENTRY(__stext)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
@@ -106,8 +111,8 @@ ENTRY(__stext)
SSYNC;
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
@@ -120,6 +125,12 @@ ENTRY(__stext)
FP = SP;
USP = SP;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -172,7 +183,7 @@ ENTRY(__stext)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined (ANOMALY_05000281)
+#if ANOMALY_05000281
nop;
nop;
nop;
@@ -335,8 +346,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -373,129 +384,6 @@ ENTRY(_start_dma_code)
RTS;
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_MTD_M25P80)
-/*
- * The following code fix the SPI flash reboot issue,
- * /CS signal of the chip which is using PF10 return to GPIO mode
- */
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
- r0.l = 0x0000;
- w[p0] = r0.l;
- SSYNC;
-
-/* /CS return to high */
- p0.h = hi(PORTFIO);
- p0.l = lo(PORTFIO);
- r0.l = 0xFFFF;
- w[p0] = r0.l;
- SSYNC;
-
-/* Delay some time, This is necessary */
- r1.h = 0;
- r1.l = 0x400;
- p1 = r1;
- lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1;
-_delay_lab1:
- r0.h = 0;
- r0.l = 0x8000;
- p0 = r0;
- lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0;
-_delay_lab0:
- nop;
-_delay_lab0_end:
- nop;
-_delay_lab1_end:
- nop;
-#endif
-
- /* Clear the bits 13-15 in SWRST if they werent cleared */
- p0.h = hi(SWRST);
- p0.l = lo(SWRST);
- csync;
- r0.l = w[p0];
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* Disable the WDOG TIMER */
- p0.h = hi(WDOG_CTL);
- p0.l = lo(WDOG_CTL);
- r0.l = 0xAD6;
- w[p0] = r0.l;
- SSYNC;
-
- /* Clear the sticky bit incase it is already set */
- p0.h = hi(WDOG_CTL);
- p0.l = lo(WDOG_CTL);
- r0.l = 0x8AD6;
- w[p0] = r0.l;
- SSYNC;
-
- /* Program the count value */
- R0.l = 0x100;
- R0.h = 0x0;
- P0.h = hi(WDOG_CNT);
- P0.l = lo(WDOG_CNT);
- [P0] = R0;
- SSYNC;
-
- /* Program WDOG_STAT if necessary */
- P0.h = hi(WDOG_CTL);
- P0.l = lo(WDOG_CTL);
- R0 = W[P0](Z);
- CC = BITTST(R0,1);
- if !CC JUMP .LWRITESTAT;
- CC = BITTST(R0,2);
- if !CC JUMP .LWRITESTAT;
- JUMP .LSKIP_WRITE;
-
-.LWRITESTAT:
- /* When watch dog timer is enabled,
- * a write to STAT will load the contents of CNT to STAT
- */
- R0 = 0x0000(z);
- P0.h = hi(WDOG_STAT);
- P0.l = lo(WDOG_STAT)
- [P0] = R0;
- SSYNC;
-
-.LSKIP_WRITE:
- /* Enable the reset event */
- P0.h = hi(WDOG_CTL);
- P0.l = lo(WDOG_CTL);
- R0 = W[P0](Z);
- BITCLR(R0,1);
- BITCLR(R0,2);
- W[P0] = R0.L;
- SSYNC;
- NOP;
-
- /* Enable the wdog counter */
- R0 = W[P0](Z);
- BITCLR(R0,4);
- W[P0] = R0.L;
- SSYNC;
-
- IDLE;
-
- RTS;
-
.data
/*
diff --git a/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c b/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 5b2b544529a1..cd827a1b6ba1 100644
--- a/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -34,7 +34,9 @@
#include
#include
#include
+#include
#include
+#include
#include
/*
@@ -112,7 +114,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
@@ -124,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
@@ -135,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
@@ -144,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
@@ -153,7 +155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
@@ -162,17 +164,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
@@ -256,6 +274,43 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 119
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2400C000,
+ .end = 0x2400C001F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2400D018,
+ .end = 0x2400D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *cm_bf561_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
@@ -271,9 +326,12 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init cm_bf561_init(void)
@@ -283,6 +341,10 @@ static int __init cm_bf561_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
diff --git a/trunk/arch/blackfin/mach-bf561/boards/ezkit.c b/trunk/arch/blackfin/mach-bf561/boards/ezkit.c
index 724191da20a2..57e14edca8b1 100644
--- a/trunk/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/trunk/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -32,6 +32,8 @@
#include
#include
#include
+#include
+#include
#include
/*
@@ -140,17 +142,33 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
#endif
#endif
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
@@ -160,23 +178,63 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
};
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init ezkit_init(void)
@@ -194,7 +252,15 @@ static int __init ezkit_init(void)
SSYNC();
#endif
- return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+ return 0;
}
arch_initcall(ezkit_init);
diff --git a/trunk/arch/blackfin/mach-bf561/head.S b/trunk/arch/blackfin/mach-bf561/head.S
index 38650a628980..96a3d456fb6d 100644
--- a/trunk/arch/blackfin/mach-bf561/head.S
+++ b/trunk/arch/blackfin/mach-bf561/head.S
@@ -33,6 +33,7 @@
#include
#if CONFIG_BFIN_KERNEL_CLOCK
+#include
#include
#endif
@@ -50,10 +51,12 @@ __INIT
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
- /* Set the SYSCFG register:
- * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit)
- */
- R0 = 0x36;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
SYSCFG = R0;
R0 = 0;
@@ -95,43 +98,42 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
- /* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -167,6 +169,12 @@ ENTRY(__start)
fp = sp;
usp = sp;
+#ifdef CONFIG_EARLY_PRINTK
+ SP += -12;
+ call _init_early_exception_vectors;
+ SP += 12;
+#endif
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -220,7 +228,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -372,8 +380,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -404,66 +412,6 @@ ENTRY(_start_dma_code)
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-ENTRY(_bfin_reset)
- /* No more interrupts to be handled*/
- CLI R6;
- SSYNC;
-
-#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
- p0.h = hi(FIO_INEN);
- p0.l = lo(FIO_INEN);
- r0.l = ~(PF1 | PF0);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_DIR);
- p0.l = lo(FIO_DIR);
- r0.l = (PF1 | PF0);
- w[p0] = r0.l;
-
- p0.h = hi(FIO_FLAG_C);
- p0.l = lo(FIO_FLAG_C);
- r0.l = (PF1 | PF0);
- w[p0] = r0.l;
-#endif
-
- /* Clear the IMASK register */
- p0.h = hi(IMASK);
- p0.l = lo(IMASK);
- r0 = 0x0;
- [p0] = r0;
-
- /* Clear the ILAT register */
- p0.h = hi(ILAT);
- p0.l = lo(ILAT);
- r0 = [p0];
- [p0] = r0;
- SSYNC;
-
- /* make sure SYSCR is set to use BMODE */
- P0.h = hi(SYSCR);
- P0.l = lo(SYSCR);
- R0.l = 0x20; /* on BF561, disable core b */
- W[P0] = R0.l;
- SSYNC;
-
- /* issue a system soft reset */
- P1.h = hi(SWRST);
- P1.l = lo(SWRST);
- R1.l = 0x0007;
- W[P1] = R1;
- SSYNC;
-
- /* clear system soft reset */
- R0.l = 0x0000;
- W[P0] = R0;
- SSYNC;
-
- /* issue core reset */
- raise 1;
-
- RTS;
-ENDPROC(_bfin_reset)
-
.data
/*
diff --git a/trunk/arch/blackfin/mach-common/Makefile b/trunk/arch/blackfin/mach-common/Makefile
index 0279ede70392..4d7733dfd5de 100644
--- a/trunk/arch/blackfin/mach-common/Makefile
+++ b/trunk/arch/blackfin/mach-common/Makefile
@@ -4,7 +4,7 @@
obj-y := \
cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
- interrupt.o lock.o irqpanic.o
+ interrupt.o lock.o irqpanic.o arch_checks.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
diff --git a/trunk/arch/blackfin/mach-common/arch_checks.c b/trunk/arch/blackfin/mach-common/arch_checks.c
new file mode 100644
index 000000000000..2f6ce397780f
--- /dev/null
+++ b/trunk/arch/blackfin/mach-common/arch_checks.c
@@ -0,0 +1,60 @@
+/*
+ * File: arch/blackfin/mach-common/arch_checks.c
+ * Based on:
+ * Author: Robin Getz
+ *
+ * Created: 25Jul07
+ * Description: Do some checking to make sure things are OK
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include
+#include
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+
+# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ)
+# error "VCO selected is more than maximum value. Please change the VCO multipler"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ)
+# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ)
+# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+# endif
+
+# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ)
+# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK"
+# endif
+
+# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+# error "Please select sclk less than cclk"
+# endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#if (CONFIG_MEM_SIZE % 4)
+#error "SDRAM mem size must be multible of 4MB"
+#endif
+
diff --git a/trunk/arch/blackfin/mach-common/cache.S b/trunk/arch/blackfin/mach-common/cache.S
index 7063795eb7c0..0521b1588204 100644
--- a/trunk/arch/blackfin/mach-common/cache.S
+++ b/trunk/arch/blackfin/mach-common/cache.S
@@ -79,8 +79,8 @@ ENTRY(_icache_invalidate)
ENTRY(_invalidate_entire_icache)
[--SP] = ( R7:5);
- P0.L = (IMEM_CONTROL & 0xFFFF);
- P0.H = (IMEM_CONTROL >> 16);
+ P0.L = LO(IMEM_CONTROL);
+ P0.H = HI(IMEM_CONTROL);
R7 = [P0];
/* Clear the IMC bit , All valid bits in the instruction
@@ -197,8 +197,8 @@ ENTRY(_invalidate_entire_dcache)
ENTRY(_dcache_invalidate)
[--SP] = ( R7:6);
- P0.L = (DMEM_CONTROL & 0xFFFF);
- P0.H = (DMEM_CONTROL >> 16);
+ P0.L = LO(DMEM_CONTROL);
+ P0.H = HI(DMEM_CONTROL);
R7 = [P0];
/* Clear the DMC[1:0] bits, All valid bits in the data
diff --git a/trunk/arch/blackfin/mach-common/cacheinit.S b/trunk/arch/blackfin/mach-common/cacheinit.S
index 5be6b975ae4a..22fada0c1cb3 100644
--- a/trunk/arch/blackfin/mach-common/cacheinit.S
+++ b/trunk/arch/blackfin/mach-common/cacheinit.S
@@ -38,13 +38,13 @@
.text
-#ifdef ANOMALY_05000125
-#if defined(CONFIG_BLKFIN_CACHE)
+#if ANOMALY_05000125
+#if defined(CONFIG_BFIN_ICACHE)
ENTRY(_bfin_write_IMEM_CONTROL)
/* Enable Instruction Cache */
- P0.l = (IMEM_CONTROL & 0xFFFF);
- P0.h = (IMEM_CONTROL >> 16);
+ P0.l = LO(IMEM_CONTROL);
+ P0.h = HI(IMEM_CONTROL);
/* Anomaly 05000125 */
CLI R1;
@@ -58,10 +58,10 @@ ENTRY(_bfin_write_IMEM_CONTROL)
ENDPROC(_bfin_write_IMEM_CONTROL)
#endif
-#if defined(CONFIG_BLKFIN_DCACHE)
+#if defined(CONFIG_BFIN_DCACHE)
ENTRY(_bfin_write_DMEM_CONTROL)
- P0.l = (DMEM_CONTROL & 0xFFFF);
- P0.h = (DMEM_CONTROL >> 16);
+ P0.l = LO(DMEM_CONTROL);
+ P0.h = HI(DMEM_CONTROL);
CLI R1;
SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
diff --git a/trunk/arch/blackfin/mach-common/cplbhdlr.S b/trunk/arch/blackfin/mach-common/cplbhdlr.S
index 2f3c72c23997..2788532de72b 100644
--- a/trunk/arch/blackfin/mach-common/cplbhdlr.S
+++ b/trunk/arch/blackfin/mach-common/cplbhdlr.S
@@ -69,14 +69,14 @@ ENTRY(__cplb_hdr)
.Lis_icplb_miss:
-#if defined(CONFIG_BLKFIN_CACHE) || defined(CONFIG_BLKFIN_DCACHE)
-# if defined(CONFIG_BLKFIN_CACHE) && !defined(CONFIG_BLKFIN_DCACHE)
+#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE)
+# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE)
R1 = CPLB_ENABLE_ICACHE;
# endif
-# if !defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE)
R1 = CPLB_ENABLE_DCACHE;
# endif
-# if defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE)
R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
# endif
#else
diff --git a/trunk/arch/blackfin/mach-common/cplbmgr.S b/trunk/arch/blackfin/mach-common/cplbmgr.S
index e4b47e09cf13..946703ef48ff 100644
--- a/trunk/arch/blackfin/mach-common/cplbmgr.S
+++ b/trunk/arch/blackfin/mach-common/cplbmgr.S
@@ -75,15 +75,15 @@ ENTRY(_cplb_mgr)
* from the configuration table.
*/
- P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
- P4.H = (ICPLB_FAULT_ADDR >> 16);
+ P4.L = LO(ICPLB_FAULT_ADDR);
+ P4.H = HI(ICPLB_FAULT_ADDR);
P1 = 16;
P5.L = _page_size_table;
P5.H = _page_size_table;
- P0.L = (ICPLB_DATA0 & 0xFFFF);
- P0.H = (ICPLB_DATA0 >> 16);
+ P0.L = LO(ICPLB_DATA0);
+ P0.H = HI(ICPLB_DATA0);
R4 = [P4]; /* Get faulting address*/
R6 = 64; /* Advance past the fault address, which*/
R6 = R6 + R4; /* we'll use if we find a match*/
@@ -117,13 +117,13 @@ ENTRY(_cplb_mgr)
I0 = R4; /* Fault address we'll search for*/
/* set up pointers */
- P0.L = (ICPLB_DATA0 & 0xFFFF);
- P0.H = (ICPLB_DATA0 >> 16);
+ P0.L = LO(ICPLB_DATA0);
+ P0.H = HI(ICPLB_DATA0);
/* The replacement procedure for ICPLBs */
- P4.L = (IMEM_CONTROL & 0xFFFF);
- P4.H = (IMEM_CONTROL >> 16);
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
/* disable cplbs */
R5 = [P4]; /* Control Register*/
@@ -243,8 +243,8 @@ ENTRY(_cplb_mgr)
* last entry of the table.
*/
- P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */
- P1.H = (ICPLB_DATA15 >> 16);
+ P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */
+ P1.H = HI(ICPLB_DATA15);
[P1] = R2;
[P1-0x100] = R4;
#ifdef CONFIG_CPLB_INFO
@@ -292,10 +292,10 @@ ENTRY(_cplb_mgr)
* pending writes associated with the CPLB.
*/
- P4.L = (DCPLB_STATUS & 0xFFFF);
- P4.H = (DCPLB_STATUS >> 16);
- P3.L = (DCPLB_DATA0 & 0xFFFF);
- P3.H = (DCPLB_DATA0 >> 16);
+ P4.L = LO(DCPLB_STATUS);
+ P4.H = HI(DCPLB_STATUS);
+ P3.L = LO(DCPLB_DATA0);
+ P3.H = HI(DCPLB_DATA0);
R5 = [P4];
/* A protection violation can be caused by more than just writes
@@ -355,11 +355,11 @@ ENTRY(_cplb_mgr)
* config table, that covers the faulting address.
*/
- P1.L = (DCPLB_DATA15 & 0xFFFF);
- P1.H = (DCPLB_DATA15 >> 16);
+ P1.L = LO(DCPLB_DATA15);
+ P1.H = HI(DCPLB_DATA15);
- P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
- P4.H = (DCPLB_FAULT_ADDR >> 16);
+ P4.L = LO(DCPLB_FAULT_ADDR);
+ P4.H = HI(DCPLB_FAULT_ADDR);
R4 = [P4];
I0 = R4;
@@ -368,8 +368,8 @@ ENTRY(_cplb_mgr)
R6 = R1; /* Save for later*/
/* Turn off CPLBs while we work.*/
- P4.L = (DMEM_CONTROL & 0xFFFF);
- P4.H = (DMEM_CONTROL >> 16);
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
R5 = [P4];
BITCLR(R5,ENDCPLB_P);
CLI R0;
@@ -384,8 +384,8 @@ ENTRY(_cplb_mgr)
* are no good.
*/
- I1.L = (DCPLB_DATA0 & 0xFFFF);
- I1.H = (DCPLB_DATA0 >> 16);
+ I1.L = LO(DCPLB_DATA0);
+ I1.H = HI(DCPLB_DATA0);
P1 = 2;
P2 = 16;
I2.L = _dcplb_preference;
@@ -405,7 +405,7 @@ ENTRY(_cplb_mgr)
P3.L = _page_size_table; /* retrieve end address */
P3.H = _page_size_table; /* retrieve end address */
R3 = 0x1002; /* 16th - position, 2 bits -length */
-#ifdef ANOMALY_05000209
+#if ANOMALY_05000209
nop; /* Anomaly 05000209 */
#endif
R7 = EXTRACT(R1,R3.l);
@@ -475,8 +475,8 @@ ENTRY(_cplb_mgr)
* one space closer to the start.
*/
- R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */
- R1.H = (DCPLB_DATA16 >> 16);
+ R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */
+ R1.H = HI(DCPLB_DATA16);
R0 = P0;
/* If the victim happens to be in DCPLB15,
@@ -549,8 +549,8 @@ ENTRY(_cplb_mgr)
* if necessary.
*/
- P1.L = (DCPLB_DATA15 & 0xFFFF);
- P1.H = (DCPLB_DATA15 >> 16);
+ P1.L = LO(DCPLB_DATA15);
+ P1.H = HI(DCPLB_DATA15);
/* If the DCPLB has cache bits set, but caching hasn't
* been enabled, then we want to mask off the cache-in-L1
@@ -565,7 +565,7 @@ ENTRY(_cplb_mgr)
* cost of first-write exceptions to mark the page as dirty.
*/
-#ifdef CONFIG_BLKFIN_WT
+#ifdef CONFIG_BFIN_WT
BITSET(R6, 14); /* Set WT*/
#endif
diff --git a/trunk/arch/blackfin/mach-common/dpmc.S b/trunk/arch/blackfin/mach-common/dpmc.S
index 97cdcd6a00d4..39fbc2861107 100644
--- a/trunk/arch/blackfin/mach-common/dpmc.S
+++ b/trunk/arch/blackfin/mach-common/dpmc.S
@@ -39,8 +39,8 @@ ENTRY(_unmask_wdog_wakeup_evt)
P0.H = hi(SICA_IWR1);
P0.L = lo(SICA_IWR1);
#else
- P0.h = (SIC_IWR >> 16);
- P0.l = (SIC_IWR & 0xFFFF);
+ P0.h = HI(SIC_IWR);
+ P0.l = LO(SIC_IWR);
#endif
R7 = [P0];
#if defined(CONFIG_BF561)
@@ -60,11 +60,11 @@ ENTRY(_unmask_wdog_wakeup_evt)
*/
R7 = 0x0000(z);
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_STAT >> 16);
- P0.l = (WDOGA_STAT & 0xFFFF);
+ P0.h = HI(WDOGA_STAT);
+ P0.l = LO(WDOGA_STAT);
#else
- P0.h = (WDOG_STAT >> 16);
- P0.l = (WDOG_STAT & 0xFFFF);
+ P0.h = HI(WDOG_STAT);
+ P0.l = LO(WDOG_STAT);
#endif
[P0] = R7;
SSYNC;
@@ -73,21 +73,21 @@ ENTRY(_unmask_wdog_wakeup_evt)
ENTRY(_program_wdog_timer)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CNT >> 16);
- P0.l = (WDOGA_CNT & 0xFFFF);
+ P0.h = HI(WDOGA_CNT);
+ P0.l = LO(WDOGA_CNT);
#else
- P0.h = (WDOG_CNT >> 16);
- P0.l = (WDOG_CNT & 0xFFFF);
+ P0.h = HI(WDOG_CNT);
+ P0.l = LO(WDOG_CNT);
#endif
[P0] = R0;
SSYNC;
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = W[P0](Z);
CC = BITTST(R7,1);
@@ -97,11 +97,11 @@ ENTRY(_program_wdog_timer)
.LSKIP_WRITE_TO_STAT:
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = W[P0](Z);
BITCLR(R7,1); /* Enable GP event */
@@ -122,11 +122,11 @@ ENTRY(_clear_wdog_wakeup_evt)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = 0x0AD6(Z);
W[P0] = R7.L;
@@ -149,11 +149,11 @@ ENTRY(_clear_wdog_wakeup_evt)
ENTRY(_disable_wdog_timer)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = 0xAD6(Z);
W[P0] = R7.L;
@@ -300,7 +300,7 @@ ENTRY(_sleep_deeper)
P0.H = hi(PLL_CTL);
P0.L = lo(PLL_CTL);
R5 = W[P0](z);
- R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9;
+ R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9;
W[P0] = R0.l;
SSYNC;
diff --git a/trunk/arch/blackfin/mach-common/entry.S b/trunk/arch/blackfin/mach-common/entry.S
index 960458808344..e3ad5802868a 100644
--- a/trunk/arch/blackfin/mach-common/entry.S
+++ b/trunk/arch/blackfin/mach-common/entry.S
@@ -29,21 +29,7 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/*
- * 25-Dec-2004 - LG Soft India
- * 1. Fix in return_from_int, to make sure any pending
- * system call in ILAT for this process to get
- * executed, otherwise in case context switch happens,
- * system call of first process (i.e in ILAT) will be
- * carried forward to the switched process.
- * 2. Removed Constant references for the following
- * a. IPEND
- * b. EXCAUSE mask
- * c. PAGE Mask
- */
-
-/*
- * NOTE: This code handles signal-recognition, which happens every time
+/* NOTE: This code handles signal-recognition, which happens every time
* after a timer-interrupt and after each system call.
*/
@@ -58,6 +44,23 @@
#include
+#if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
+# define EX_SCRATCH_REG RETN
+#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE)
+# define EX_SCRATCH_REG RETE
+#else
+# define EX_SCRATCH_REG CYCLES
+#endif
+
+#if ANOMALY_05000281
+ENTRY(_safe_speculative_execution)
+ NOP;
+ NOP;
+ NOP;
+ jump _safe_speculative_execution;
+ENDPROC(_safe_speculative_execution)
+#endif
+
#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
.section .l1.text
#else
@@ -69,7 +72,7 @@
* patch up CPLB misses on the kernel stack.
*/
ENTRY(_ex_dcplb)
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/*
* Work around an anomaly: if we see a new DCPLB fault, return
* without doing anything. Then, if we get the same fault again,
@@ -93,7 +96,7 @@ ENTRY(_ex_icplb)
call __cplb_hdr;
DEBUG_START_HWTRACE(p5, r7)
RESTORE_ALL_SYS
- SP = RETN;
+ SP = EX_SCRATCH_REG;
rtx;
ENDPROC(_ex_icplb)
@@ -102,7 +105,7 @@ ENTRY(_ex_syscall)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
raise 15; /* invoked by TRAP #0, for sys call */
- sp = retn;
+ sp = EX_SCRATCH_REG;
rtx
ENDPROC(_ex_syscall)
@@ -135,9 +138,9 @@ ENTRY(_ex_single_step)
cc = r6 == r7;
if !cc jump _ex_trap_c;
-_return_from_exception:
+ENTRY(_return_from_exception)
DEBUG_START_HWTRACE(p5, r7)
-#ifdef ANOMALY_05000257
+#if ANOMALY_05000257
R7=LC0;
LC0=R7;
R7=LC1;
@@ -145,7 +148,7 @@ _return_from_exception:
#endif
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
- sp = retn;
+ sp = EX_SCRATCH_REG;
rtx;
ENDPROC(_ex_soft_bp)
@@ -163,7 +166,17 @@ ENTRY(_handle_bad_cplb)
[--sp] = ASTAT;
[--sp] = (R7:6, P5:4);
+ENTRY(_ex_replaceable)
+ nop;
+
ENTRY(_ex_trap_c)
+ /* Make sure we are not in a double fault */
+ p4.l = lo(IPEND);
+ p4.h = hi(IPEND);
+ r7 = [p4];
+ CC = BITTST (r7, 5);
+ if CC jump _double_fault;
+
/* Call C code (trap_c) to handle the exception, which most
* likely involves sending a signal to the current process.
* To avoid double faults, lower our priority to IRQ5 first.
@@ -204,11 +217,57 @@ ENTRY(_ex_trap_c)
DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
- SP = RETN;
+ SP = EX_SCRATCH_REG;
raise 5;
rtx;
ENDPROC(_ex_trap_c)
+/* We just realized we got an exception, while we were processing a different
+ * exception. This is a unrecoverable event, so crash
+ */
+ENTRY(_double_fault)
+ /* Turn caches & protection off, to ensure we don't get any more
+ * double exceptions
+ */
+
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
+
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ /* Fix up the stack */
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SP = EX_SCRATCH_REG;
+
+ /* We should be out of the exception stack, and back down into
+ * kernel or user space stack
+ */
+ SAVE_ALL_SYS
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ SP += -12;
+ call _double_fault_c;
+ SP += 12;
+.L_double_fault_panic:
+ JUMP .L_double_fault_panic
+
+ENDPROC(_double_fault)
+
ENTRY(_exception_to_level5)
SAVE_ALL_SYS
@@ -279,7 +338,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
* covered by a CPLB. Switch to an exception stack; use RETN as a
* scratch register (for want of a better option).
*/
- retn = sp;
+ EX_SCRATCH_REG = sp;
sp.l = _exception_stack_top;
sp.h = _exception_stack_top;
/* Try to deal with syscalls quickly. */
@@ -290,8 +349,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
r7 = r7 & r6;
- p5.h = _extable;
- p5.l = _extable;
+ p5.h = _ex_table;
+ p5.l = _ex_table;
p4 = r7;
p5 = p5 + (p4 << 2);
p4 = [p5];
@@ -634,9 +693,9 @@ ENTRY(_return_from_int)
p1.h = _schedule_and_signal_from_int;
[p0] = p1;
csync;
-#if defined(ANOMALY_05000281)
- r0.l = lo(CONFIG_BOOT_LOAD);
- r0.h = hi(CONFIG_BOOT_LOAD);
+#if ANOMALY_05000281
+ r0.l = _safe_speculative_execution;
+ r0.h = _safe_speculative_execution;
reti = r0;
#endif
r0 = 0x801f (z);
@@ -648,9 +707,9 @@ ENTRY(_return_from_int)
ENDPROC(_return_from_int)
ENTRY(_lower_to_irq14)
-#if defined(ANOMALY_05000281)
- r0.l = lo(CONFIG_BOOT_LOAD);
- r0.h = hi(CONFIG_BOOT_LOAD);
+#if ANOMALY_05000281
+ r0.l = _safe_speculative_execution;
+ r0.h = _safe_speculative_execution;
reti = r0;
#endif
r0 = 0x401f;
@@ -731,6 +790,114 @@ ENTRY(_init_exception_buff)
rts;
ENDPROC(_init_exception_buff)
+/* We handle this 100% in exception space - to reduce overhead
+ * Only potiential problem is if the software buffer gets swapped out of the
+ * CPLB table - then double fault. - so we don't let this happen in other places
+ */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ENTRY(_ex_trace_buff_full)
+ [--sp] = P3;
+ [--sp] = P2;
+ [--sp] = LC0;
+ [--sp] = LT0;
+ [--sp] = LB0;
+ P5.L = _trace_buff_offset;
+ P5.H = _trace_buff_offset;
+ P3 = [P5]; /* trace_buff_offset */
+ P5.L = lo(TBUFSTAT);
+ P5.H = hi(TBUFSTAT);
+ R7 = [P5];
+ R7 <<= 1; /* double, since we need to read twice */
+ LC0 = R7;
+ R7 <<= 2; /* need to shift over again,
+ * to get the number of bytes */
+ P5.L = lo(TBUF);
+ P5.H = hi(TBUF);
+ R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
+
+ P2 = R7;
+ P3 = P3 + P2;
+ R7 = P3;
+ R7 = R7 & R6;
+ P3 = R7;
+ P2.L = _trace_buff_offset;
+ P2.H = _trace_buff_offset;
+ [P2] = P3;
+
+ P2.L = _software_trace_buff;
+ P2.H = _software_trace_buff;
+
+ LSETUP (.Lstart, .Lend) LC0;
+.Lstart:
+ R7 = [P5]; /* read TBUF */
+ P4 = P3 + P2;
+ [P4] = R7;
+ P3 += -4;
+ R7 = P3;
+ R7 = R7 & R6;
+.Lend:
+ P3 = R7;
+
+ LB0 = [sp++];
+ LT0 = [sp++];
+ LC0 = [sp++];
+ P2 = [sp++];
+ P3 = [sp++];
+ jump _return_from_exception;
+ENDPROC(_ex_trace_buff_full)
+
+#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
+.data
+#else
+.section .l1.data.B
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */
+ENTRY(_trace_buff_offset)
+ .long 0;
+ALIGN
+ENTRY(_software_trace_buff)
+ .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
+ .long 0
+ .endr
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
+
+#if CONFIG_EARLY_PRINTK
+.section .init.text
+ENTRY(_early_trap)
+ SAVE_ALL_SYS
+ trace_buffer_stop(p0,r0);
+
+ /* Turn caches off, to ensure we don't get double exceptions */
+
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
+
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ CLI R1;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R1;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ r1 = RETX;
+
+ SP += -12;
+ call _early_trap_c;
+ SP += 12;
+ENDPROC(_early_trap)
+#endif /* CONFIG_EARLY_PRINTK */
+
/*
* Put these in the kernel data section - that should always be covered by
* a CPLB. This is needed to ensure we don't get double fault conditions
@@ -741,30 +908,33 @@ ENDPROC(_init_exception_buff)
#else
.data
#endif
-ALIGN
-_extable:
+ENTRY(_ex_table)
/* entry for each EXCAUSE[5:0]
* This table must be in sync with the table in ./kernel/traps.c
* EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
*/
- .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */
+ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
- .long _ex_trap_c /* 0x02 - User Defined */
+ .long _ex_replaceable /* 0x02 - User Defined */
.long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
- .long _ex_trap_c /* 0x04 - User Defined */
- .long _ex_trap_c /* 0x05 - User Defined */
- .long _ex_trap_c /* 0x06 - User Defined */
- .long _ex_trap_c /* 0x07 - User Defined */
- .long _ex_trap_c /* 0x08 - User Defined */
- .long _ex_trap_c /* 0x09 - User Defined */
- .long _ex_trap_c /* 0x0A - User Defined */
- .long _ex_trap_c /* 0x0B - User Defined */
- .long _ex_trap_c /* 0x0C - User Defined */
- .long _ex_trap_c /* 0x0D - User Defined */
- .long _ex_trap_c /* 0x0E - User Defined */
- .long _ex_trap_c /* 0x0F - User Defined */
+ .long _ex_replaceable /* 0x04 - User Defined */
+ .long _ex_replaceable /* 0x05 - User Defined */
+ .long _ex_replaceable /* 0x06 - User Defined */
+ .long _ex_replaceable /* 0x07 - User Defined */
+ .long _ex_replaceable /* 0x08 - User Defined */
+ .long _ex_replaceable /* 0x09 - User Defined */
+ .long _ex_replaceable /* 0x0A - User Defined */
+ .long _ex_replaceable /* 0x0B - User Defined */
+ .long _ex_replaceable /* 0x0C - User Defined */
+ .long _ex_replaceable /* 0x0D - User Defined */
+ .long _ex_replaceable /* 0x0E - User Defined */
+ .long _ex_replaceable /* 0x0F - User Defined */
.long _ex_single_step /* 0x10 - HW Single step */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
+#else
.long _ex_trap_c /* 0x11 - Trace Buffer Full */
+#endif
.long _ex_trap_c /* 0x12 - Reserved */
.long _ex_trap_c /* 0x13 - Reserved */
.long _ex_trap_c /* 0x14 - Reserved */
@@ -812,8 +982,8 @@ _extable:
.long _ex_trap_c /* 0x3D - Reserved */
.long _ex_trap_c /* 0x3E - Reserved */
.long _ex_trap_c /* 0x3F - Reserved */
+END(_ex_table)
-ALIGN
ENTRY(_sys_call_table)
.long _sys_restart_syscall /* 0 */
.long _sys_exit
@@ -1184,7 +1354,7 @@ _exception_stack:
.endr
_exception_stack_top:
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/* Used by the assembly entry point to work around an anomaly. */
_last_cplb_fault_retx:
.long 0;
diff --git a/trunk/arch/blackfin/mach-common/interrupt.S b/trunk/arch/blackfin/mach-common/interrupt.S
index 203e20709163..c6b32fe0f6e9 100644
--- a/trunk/arch/blackfin/mach-common/interrupt.S
+++ b/trunk/arch/blackfin/mach-common/interrupt.S
@@ -46,30 +46,6 @@
.align 4 /* just in case */
-/*
- * initial interrupt handlers
- */
-
-#ifndef CONFIG_KGDB
- /* interrupt routine for emulation - 0 */
- /* Currently used only if GDB stub is not in - invalid */
- /* gdb-stub set the evt itself */
- /* save registers for post-mortem only */
-ENTRY(_evt_emulation)
- SAVE_ALL_SYS
-#ifdef CONFIG_FRAME_POINTER
- fp = 0;
-#endif
- r0 = IRQ_EMU;
- r1 = sp;
- SP += -12;
- call _irq_panic;
- SP += 12;
- /* - GDB stub fills this in by itself (if defined) */
- rte;
-ENDPROC(_evt_emulation)
-#endif
-
/* Common interrupt entry code. First we do CLI, then push
* RETI, to keep interrupts disabled, but to allow this state to be changed
* by local_bh_enable.
@@ -140,7 +116,7 @@ __common_int_entry:
fp = 0;
#endif
-#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315)
+#if ANOMALY_05000283 || ANOMALY_05000315
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -163,7 +139,7 @@ ENTRY(_evt_ivhw)
#ifdef CONFIG_FRAME_POINTER
fp = 0;
#endif
-#ifdef ANOMALY_05000283
+#if ANOMALY_05000283
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -201,27 +177,15 @@ ENTRY(_evt_ivhw)
jump .Lcommon_restore_context;
#endif
-/* interrupt routine for evt2 - 2. This is NMI. */
-ENTRY(_evt_evt2)
- SAVE_CONTEXT
-#ifdef CONFIG_FRAME_POINTER
- fp = 0;
-#endif
-#ifdef ANOMALY_05000283
- cc = r7 == r7;
- p5.h = 0xffc0;
- p5.l = 0x0014;
- if cc jump 1f;
- r7.l = W[p5];
-1:
-#endif
- r0 = IRQ_NMI;
- r1 = sp;
- SP += -12;
- call _asm_do_IRQ;
- SP += 12;
- RESTORE_CONTEXT
+/* Interrupt routine for evt2 (NMI).
+ * We don't actually use this, so just return.
+ * For inner circle type details, please see:
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
+ */
+ENTRY(_evt_nmi)
+.weak _evt_nmi
rtn;
+ENDPROC(_evt_nmi)
/* interrupt routine for core timer - 6 */
ENTRY(_evt_timer)
diff --git a/trunk/arch/blackfin/mach-common/ints-priority-dc.c b/trunk/arch/blackfin/mach-common/ints-priority-dc.c
index 660f881b620a..2db3546fc874 100644
--- a/trunk/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/trunk/arch/blackfin/mach-common/ints-priority-dc.c
@@ -221,7 +221,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
@@ -261,7 +261,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
@@ -362,10 +362,11 @@ void __init init_exception_vectors(void)
{
SSYNC();
-#ifndef CONFIG_KGDB
- bfin_write_EVT0(evt_emulation);
-#endif
- bfin_write_EVT2(evt_evt2);
+ /* cannot program in software:
+ * evt0 - emulation (jtag)
+ * evt1 - reset
+ */
+ bfin_write_EVT2(evt_nmi);
bfin_write_EVT3(trap);
bfin_write_EVT5(evt_ivhw);
bfin_write_EVT6(evt_timer);
diff --git a/trunk/arch/blackfin/mach-common/ints-priority-sc.c b/trunk/arch/blackfin/mach-common/ints-priority-sc.c
index 4708023fe716..d3b7672b2b94 100644
--- a/trunk/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/trunk/arch/blackfin/mach-common/ints-priority-sc.c
@@ -343,7 +343,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
u16 gpionr = irq - IRQ_PF0;
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -377,7 +377,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -587,7 +587,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -627,7 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -721,10 +721,11 @@ void __init init_exception_vectors(void)
{
SSYNC();
-#ifndef CONFIG_KGDB
- bfin_write_EVT0(evt_emulation);
-#endif
- bfin_write_EVT2(evt_evt2);
+ /* cannot program in software:
+ * evt0 - emulation (jtag)
+ * evt1 - reset
+ */
+ bfin_write_EVT2(evt_nmi);
bfin_write_EVT3(trap);
bfin_write_EVT5(evt_ivhw);
bfin_write_EVT6(evt_timer);
diff --git a/trunk/arch/blackfin/mach-common/lock.S b/trunk/arch/blackfin/mach-common/lock.S
index 386ac8dda076..28b87fe9ce3c 100644
--- a/trunk/arch/blackfin/mach-common/lock.S
+++ b/trunk/arch/blackfin/mach-common/lock.S
@@ -33,7 +33,7 @@
.text
-#ifdef CONFIG_BLKFIN_CACHE_LOCK
+#ifdef CONFIG_BFIN_ICACHE_LOCK
/* When you come here, it is assumed that
* R0 - Which way to be locked
@@ -43,12 +43,12 @@ ENTRY(_cache_grab_lock)
[--SP]=( R7:0,P5:0 );
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
- P5.H = (ICPLB_ADDR0 >> 16);
- P5.L = (ICPLB_ADDR0 & 0xFFFF);
- P4.H = (ICPLB_DATA0 >> 16);
- P4.L = (ICPLB_DATA0 & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
+ P5.H = HI(ICPLB_ADDR0);
+ P5.L = LO(ICPLB_ADDR0);
+ P4.H = HI(ICPLB_DATA0);
+ P4.L = LO(ICPLB_DATA0);
R7 = R0;
/* If the code of interest already resides in the cache
@@ -167,8 +167,8 @@ ENTRY(_cache_lock)
[--SP]=( R7:0,P5:0 );
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
/* Disable the Interrupts*/
CLI R3;
@@ -189,14 +189,14 @@ ENTRY(_cache_lock)
RTS;
ENDPROC(_cache_lock)
-#endif /* BLKFIN_CACHE_LOCK */
+#endif /* BFIN_ICACHE_LOCK */
/* Return the ILOC bits of IMEM_CONTROL
*/
ENTRY(_read_iloc)
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
R1 = 0xF;
R0 = [P1];
R0 = R0 >> 3;
diff --git a/trunk/arch/blackfin/mm/init.c b/trunk/arch/blackfin/mm/init.c
index 68459cc052a1..e97ea8fc8dc4 100644
--- a/trunk/arch/blackfin/mm/init.c
+++ b/trunk/arch/blackfin/mm/init.c
@@ -53,7 +53,7 @@ static unsigned long empty_bad_page;
unsigned long empty_zero_page;
-void __init show_mem(void)
+void show_mem(void)
{
unsigned long i;
int free = 0, total = 0, reserved = 0, shared = 0;
diff --git a/trunk/arch/blackfin/oprofile/op_blackfin.h b/trunk/arch/blackfin/oprofile/op_blackfin.h
index f88f446c814f..05dd08c9d154 100644
--- a/trunk/arch/blackfin/oprofile/op_blackfin.h
+++ b/trunk/arch/blackfin/oprofile/op_blackfin.h
@@ -68,7 +68,7 @@ static inline unsigned int ctr_read(void)
unsigned int tmp;
tmp = bfin_read_PFCTL();
- __builtin_bfin_csync();
+ CSYNC();
return tmp;
}
@@ -76,21 +76,21 @@ static inline unsigned int ctr_read(void)
static inline void ctr_write(unsigned int val)
{
bfin_write_PFCTL(val);
- __builtin_bfin_csync();
+ CSYNC();
}
static inline void count_read(unsigned int *count)
{
count[0] = bfin_read_PFCNTR0();
count[1] = bfin_read_PFCNTR1();
- __builtin_bfin_csync();
+ CSYNC();
}
static inline void count_write(unsigned int *count)
{
bfin_write_PFCNTR0(count[0]);
bfin_write_PFCNTR1(count[1]);
- __builtin_bfin_csync();
+ CSYNC();
}
extern int pm_overflow_handler(int irq, struct pt_regs *regs);
diff --git a/trunk/arch/i386/Kconfig b/trunk/arch/i386/Kconfig
index 97b64d7d6bf6..6bbbc2755e44 100644
--- a/trunk/arch/i386/Kconfig
+++ b/trunk/arch/i386/Kconfig
@@ -226,7 +226,7 @@ config PARAVIRT
However, when run without a hypervisor the kernel is
theoretically slower. If in doubt, say N.
-source "arch/i386/xen/Kconfig"
+source "arch/x86/xen/Kconfig"
config VMI
bool "VMI Paravirt-ops support"
@@ -707,7 +707,7 @@ config MATH_EMULATION
intend to use this kernel on different machines.
More information about the internals of the Linux math coprocessor
- emulation can be found in .
+ emulation can be found in .
If you are not sure, say Y; apart from resulting in a 66 KB bigger
kernel, it won't hurt.
@@ -1067,7 +1067,7 @@ config APM_REAL_MODE_POWER_OFF
endif # APM
-source "arch/i386/kernel/cpu/cpufreq/Kconfig"
+source "arch/x86/kernel/cpu/cpufreq/Kconfig"
endmenu
@@ -1206,6 +1206,16 @@ config SCx200HR_TIMER
processor goes idle (as is done by the scheduler). The
other workaround is idle=poll boot option.
+config GEODE_MFGPT_TIMER
+ bool "Geode Multi-Function General Purpose Timer (MFGPT) events"
+ depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
+ default y
+ help
+ This driver provides a clock event source based on the MFGPT
+ timer(s) in the CS5535 and CS5536 companion chip for the geode.
+ MFGPTs have a better resolution and max interval than the
+ generic PIT, and are suitable for use as high-res timers.
+
config K8_NB
def_bool y
depends on AGP_AMD64
@@ -1240,7 +1250,7 @@ menuconfig INSTRUMENTATION
if INSTRUMENTATION
-source "arch/i386/oprofile/Kconfig"
+source "arch/x86/oprofile/Kconfig"
config KPROBES
bool "Kprobes"
diff --git a/trunk/arch/i386/Makefile b/trunk/arch/i386/Makefile
index 52b932478c6d..5e50dbf00f3e 100644
--- a/trunk/arch/i386/Makefile
+++ b/trunk/arch/i386/Makefile
@@ -17,6 +17,9 @@
# 20050320 Kianusch Sayah Karadji
# Added support for GEODE CPU
+# Fill in SRCARCH
+SRCARCH := x86
+
HAS_BIARCH := $(call cc-option-yn, -m32)
ifeq ($(HAS_BIARCH),y)
AS := $(AS) --32
@@ -61,62 +64,62 @@ AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONF
CFLAGS += $(cflags-y)
# Default subarch .c files
-mcore-y := mach-default
+mcore-y := arch/x86/mach-default
# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-i386/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER) := mach-voyager
+mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
+mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager
# VISWS subarch support
-mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-i386/mach-visws
-mcore-$(CONFIG_X86_VISWS) := mach-visws
+mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
+mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws
# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := mach-default
+mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
+mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default
# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-i386/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP) := mach-default
+mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
+mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default
#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-i386/mach-summit
-mcore-$(CONFIG_X86_SUMMIT) := mach-default
+mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
+mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default
# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-i386/mach-generic
-mcore-$(CONFIG_X86_GENERICARCH) := mach-default
-core-$(CONFIG_X86_GENERICARCH) += arch/i386/mach-generic/
+mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic
+mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default
+core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-i386/mach-es7000
-mcore-$(CONFIG_X86_ES7000) := mach-default
-core-$(CONFIG_X86_ES7000) := arch/i386/mach-es7000/
+mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
+mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default
+core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/i386/xen/
+core-$(CONFIG_XEN) += arch/x86/xen/
# default subarch .h files
-mflags-y += -Iinclude/asm-i386/mach-default
+mflags-y += -Iinclude/asm-x86/mach-default
-head-y := arch/i386/kernel/head.o arch/i386/kernel/init_task.o
+head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task_32.o
-libs-y += arch/i386/lib/
-core-y += arch/i386/kernel/ \
- arch/i386/mm/ \
- arch/i386/$(mcore-y)/ \
- arch/i386/crypto/
-drivers-$(CONFIG_MATH_EMULATION) += arch/i386/math-emu/
-drivers-$(CONFIG_PCI) += arch/i386/pci/
+libs-y += arch/x86/lib/
+core-y += arch/x86/kernel/ \
+ arch/x86/mm/ \
+ $(mcore-y)/ \
+ arch/x86/crypto/
+drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+drivers-$(CONFIG_PCI) += arch/x86/pci/
# must be linked after kernel/
-drivers-$(CONFIG_OPROFILE) += arch/i386/oprofile/
-drivers-$(CONFIG_PM) += arch/i386/power/
-drivers-$(CONFIG_FB) += arch/i386/video/
+drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
+drivers-$(CONFIG_PM) += arch/x86/power/
+drivers-$(CONFIG_FB) += arch/x86/video/
CFLAGS += $(mflags-y)
AFLAGS += $(mflags-y)
-boot := arch/i386/boot
+boot := arch/x86/boot
PHONY += zImage bzImage compressed zlilo bzlilo \
zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
@@ -125,9 +128,11 @@ all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := arch/i386/boot/zImage
+zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
zImage bzImage: vmlinux
+ $(Q)mkdir -p $(objtree)/arch/i386/boot
+ $(Q)ln -fsn $(objtree)/arch/x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
compressed: zImage
@@ -145,7 +150,8 @@ install:
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
archclean:
- $(Q)$(MAKE) $(clean)=arch/i386/boot
+ $(Q)rm -rf $(objtree)/arch/i386/boot
+ $(Q)$(MAKE) $(clean)=arch/x86/boot
define archhelp
echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
diff --git a/trunk/arch/i386/kernel/Makefile b/trunk/arch/i386/kernel/Makefile
deleted file mode 100644
index 9d33b00de659..000000000000
--- a/trunk/arch/i386/kernel/Makefile
+++ /dev/null
@@ -1,88 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y := process.o signal.o entry.o traps.o irq.o \
- ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
- pci-dma.o i386_ksyms.o i387.o bootflag.o e820.o\
- quirks.o i8237.o topology.o alternative.o i8253.o tsc.o
-
-obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-y += cpu/
-obj-y += acpi/
-obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
-obj-$(CONFIG_MCA) += mca.o
-obj-$(CONFIG_X86_MSR) += msr.o
-obj-$(CONFIG_X86_CPUID) += cpuid.o
-obj-$(CONFIG_MICROCODE) += microcode.o
-obj-$(CONFIG_APM) += apm.o
-obj-$(CONFIG_X86_SMP) += smp.o smpboot.o tsc_sync.o
-obj-$(CONFIG_SMP) += smpcommon.o
-obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
-obj-$(CONFIG_X86_MPPARSE) += mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
-obj-$(CONFIG_X86_IO_APIC) += io_apic.o
-obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
-obj-$(CONFIG_X86_NUMAQ) += numaq.o
-obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_MODULES) += module.o
-obj-y += sysenter.o vsyscall.o
-obj-$(CONFIG_ACPI_SRAT) += srat.o
-obj-$(CONFIG_EFI) += efi.o efi_stub.o
-obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
-obj-$(CONFIG_VM86) += vm86.o
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_HPET_TIMER) += hpet.o
-obj-$(CONFIG_K8_NB) += k8.o
-obj-$(CONFIG_MGEODE_LX) += geode.o
-
-obj-$(CONFIG_VMI) += vmi.o vmiclock.o
-obj-$(CONFIG_PARAVIRT) += paravirt.o
-obj-y += pcspeaker.o
-
-obj-$(CONFIG_SCx200) += scx200.o
-
-# vsyscall.o contains the vsyscall DSO images as __initdata.
-# We must build both images before we can assemble it.
-# Note: kbuild does not track this dependency due to usage of .incbin
-$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
-targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall-note.o vsyscall.lds
-
-# The DSO images are built using a special linker script.
-quiet_cmd_syscall = SYSCALL $@
- cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
- -Wl,-T,$(filter-out FORCE,$^) -o $@
-
-export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
-
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
-SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
-SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
-
-$(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall.lds \
- $(obj)/vsyscall-%.o $(obj)/vsyscall-note.o FORCE
- $(call if_changed,syscall)
-
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
-extra-y += vsyscall-syms.o
-$(obj)/built-in.o: $(obj)/vsyscall-syms.o
-$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
-
-SYSCFLAGS_vsyscall-syms.o = -r
-$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
- $(obj)/vsyscall-sysenter.o $(obj)/vsyscall-note.o FORCE
- $(call if_changed,syscall)
-
-k8-y += ../../x86_64/kernel/k8.o
-stacktrace-y += ../../x86_64/kernel/stacktrace.o
-
diff --git a/trunk/arch/i386/kernel/early_printk.c b/trunk/arch/i386/kernel/early_printk.c
deleted file mode 100644
index 92f812ba275c..000000000000
--- a/trunk/arch/i386/kernel/early_printk.c
+++ /dev/null
@@ -1,2 +0,0 @@
-
-#include "../../x86_64/kernel/early_printk.c"
diff --git a/trunk/arch/i386/kernel/quirks.c b/trunk/arch/i386/kernel/quirks.c
deleted file mode 100644
index 6722469c2633..000000000000
--- a/trunk/arch/i386/kernel/quirks.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This file contains work-arounds for x86 and x86_64 platform bugs.
- */
-#include
-#include
-
-#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
-
-static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
-{
- u8 config, rev;
- u32 word;
-
- /* BIOS may enable hardware IRQ balancing for
- * E7520/E7320/E7525(revision ID 0x9 and below)
- * based platforms.
- * Disable SW irqbalance/affinity on those platforms.
- */
- pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
- if (rev > 0x9)
- return;
-
- /* enable access to config space*/
- pci_read_config_byte(dev, 0xf4, &config);
- pci_write_config_byte(dev, 0xf4, config|0x2);
-
- /* read xTPR register */
- raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
-
- if (!(word & (1 << 13))) {
- printk(KERN_INFO "Intel E7520/7320/7525 detected. "
- "Disabling irq balancing and affinity\n");
-#ifdef CONFIG_IRQBALANCE
- irqbalance_disable("");
-#endif
- noirqdebug_setup("");
-#ifdef CONFIG_PROC_FS
- no_irq_affinity = 1;
-#endif
- }
-
- /* put back the original value for config space*/
- if (!(config & 0x2))
- pci_write_config_byte(dev, 0xf4, config);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance);
-#endif
diff --git a/trunk/arch/i386/kernel/tsc_sync.c b/trunk/arch/i386/kernel/tsc_sync.c
deleted file mode 100644
index 12424629af87..000000000000
--- a/trunk/arch/i386/kernel/tsc_sync.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../x86_64/kernel/tsc_sync.c"
diff --git a/trunk/arch/i386/lib/Makefile b/trunk/arch/i386/lib/Makefile
deleted file mode 100644
index 4d105fdfe817..000000000000
--- a/trunk/arch/i386/lib/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for i386-specific library files..
-#
-
-
-lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \
- bitops.o semaphore.o string.o
-
-lib-$(CONFIG_X86_USE_3DNOW) += mmx.o
-
-obj-$(CONFIG_SMP) += msr-on-cpu.o
diff --git a/trunk/arch/i386/mach-generic/Makefile b/trunk/arch/i386/mach-generic/Makefile
deleted file mode 100644
index 6914485c0d85..000000000000
--- a/trunk/arch/i386/mach-generic/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the generic architecture
-#
-
-EXTRA_CFLAGS := -Iarch/i386/kernel
-
-obj-y := probe.o summit.o bigsmp.o es7000.o default.o ../mach-es7000/
diff --git a/trunk/arch/i386/mm/Makefile b/trunk/arch/i386/mm/Makefile
deleted file mode 100644
index 80908b5aa60f..000000000000
--- a/trunk/arch/i386/mm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux i386-specific parts of the memory manager.
-#
-
-obj-y := init.o pgtable.o fault.o ioremap.o extable.o pageattr.o mmap.o
-
-obj-$(CONFIG_NUMA) += discontig.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_HIGHMEM) += highmem.o
-obj-$(CONFIG_BOOT_IOREMAP) += boot_ioremap.o
diff --git a/trunk/arch/ia64/hp/sim/simeth.c b/trunk/arch/ia64/hp/sim/simeth.c
index 4017696ada63..08b117e2c54b 100644
--- a/trunk/arch/ia64/hp/sim/simeth.c
+++ b/trunk/arch/ia64/hp/sim/simeth.c
@@ -294,6 +294,9 @@ simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
return NOTIFY_DONE;
}
+ if (dev->nd_net != &init_net)
+ return NOTIFY_DONE;
+
if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
/*
diff --git a/trunk/arch/ia64/ia32/audit.c b/trunk/arch/ia64/ia32/audit.c
index 8850fe40ea34..5e901c75df1b 100644
--- a/trunk/arch/ia64/ia32/audit.c
+++ b/trunk/arch/ia64/ia32/audit.c
@@ -1,4 +1,4 @@
-#include
+#include
unsigned ia32_dir_class[] = {
#include
diff --git a/trunk/arch/mips/Kconfig b/trunk/arch/mips/Kconfig
index 3b807b4bc7cd..f943736541cb 100644
--- a/trunk/arch/mips/Kconfig
+++ b/trunk/arch/mips/Kconfig
@@ -3,6 +3,7 @@ config MIPS
default y
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
+ select RTC_LIB
mainmenu "Linux/MIPS Kernel Configuration"
@@ -44,12 +45,30 @@ config BASLER_EXCITE_PROTOTYPE
note that a kernel built with this option selected will not be
able to run on normal units.
+config BCM47XX
+ bool "BCM47XX based boards"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SSB
+ select SSB_DRIVER_MIPS
+ select GENERIC_GPIO
+ select SYS_HAS_EARLY_PRINTK
+ select CFE
+ help
+ Support for BCM47XX based boards
+
config MIPS_COBALT
bool "Cobalt Server"
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select I8253
select I8259
select IRQ_CPU
+ select IRQ_GT641XX
select PCI_GT64XXX_PCI0
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
@@ -93,6 +112,8 @@ config MACH_JAZZ
select ARC32
select ARCH_MAY_HAVE_PC_FDC
select GENERIC_ISA_DMA
+ select IRQ_CPU
+ select I8253
select I8259
select ISA
select PCSPEAKER
@@ -107,6 +128,20 @@ config MACH_JAZZ
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
Olivetti M700-10 workstations.
+config LASAT
+ bool "LASAT Networks platforms"
+ select DMA_NONCOHERENT
+ select SYS_HAS_EARLY_PRINTK
+ select HW_HAS_PCI
+ select PCI_GT64XXX_PCI0
+ select MIPS_NILE4
+ select R5000_CPU_SCACHE
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+
config LEMOTE_FULONG
bool "Lemote Fulong mini-PC"
select ARCH_SPARSEMEM_ENABLE
@@ -168,6 +203,7 @@ config MIPS_MALTA
select GENERIC_ISA_DMA
select IRQ_CPU
select HW_HAS_PCI
+ select I8253
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
@@ -301,7 +337,9 @@ config QEMU
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
+ select I8253
select I8259
+ select IRQ_CPU
select ISA
select PCSPEAKER
select SWAP_IO_SPACE
@@ -328,6 +366,7 @@ config SGI_IP22
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_EISA
+ select I8253
select IP22_CPU_SCACHE
select IRQ_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
@@ -352,7 +391,6 @@ config SGI_IP27
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
select NR_CPUS_DEFAULT_64
- select PCI_DOMAINS
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
@@ -484,7 +522,6 @@ config SIBYTE_BIGSUR
select BOOT_ELF32
select DMA_COHERENT
select NR_CPUS_DEFAULT_4
- select PCI_DOMAINS
select SIBYTE_BCM1x80
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
@@ -502,6 +539,7 @@ config SNI_RM
select HW_HAS_EISA
select HW_HAS_PCI
select IRQ_CPU
+ select I8253
select I8259
select ISA
select PCSPEAKER
@@ -599,6 +637,7 @@ endchoice
source "arch/mips/au1000/Kconfig"
source "arch/mips/jazz/Kconfig"
+source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
@@ -635,10 +674,18 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
config GENERIC_TIME
bool
default y
+config GENERIC_CMOS_UPDATE
+ bool
+ default y
+
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
@@ -659,6 +706,9 @@ config ARCH_MAY_HAVE_PC_FDC
config BOOT_RAW
bool
+config CFE
+ bool
+
config DMA_COHERENT
bool
@@ -706,6 +756,9 @@ config MIPS_BONITO64
config MIPS_MSC
bool
+config MIPS_NILE4
+ bool
+
config MIPS_DISABLE_OBSOLETE_IDE
bool
@@ -775,6 +828,9 @@ config IRQ_MSP_CIC
config IRQ_TXX9
bool
+config IRQ_GT641XX
+ bool
+
config MIPS_BOARDS_GEN
bool
@@ -856,6 +912,8 @@ config BOOT_ELF64
menu "CPU selection"
+source "kernel/time/Kconfig"
+
choice
prompt "CPU type"
default CPU_R4X00
@@ -1316,6 +1374,7 @@ config MIPS_MT_SMTC
depends on CPU_MIPS32_R2
#depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
+ select GENERIC_CLOCKEVENTS_BROADCAST
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select CPU_MIPSR2_SRS
@@ -1378,6 +1437,19 @@ config MIPS_MT_SMTC_IM_BACKSTOP
impact on interrupt service overhead. Disable it only if you know
what you are doing.
+config MIPS_MT_SMTC_IRQAFF
+ bool "Support IRQ affinity API"
+ depends on MIPS_MT_SMTC
+ default n
+ help
+ Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
+ for SMTC Linux kernel. Requires platform support, of which
+ an example can be found in the MIPS kernel i8259 and Malta
+ platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
+ be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
+ interrupt dispatch, and should be used only if you know what
+ you are doing.
+
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
depends on MIPS_VPE_LOADER
@@ -1472,6 +1544,9 @@ config CPU_HAS_SYNC
depends on !CPU_R3000
default y
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+
#
# Use the generic interrupt handling code in kernel/irq/:
#
@@ -1762,6 +1837,7 @@ config HW_HAS_PCI
config PCI
bool "Support for PCI controller"
depends on HW_HAS_PCI
+ select PCI_DOMAINS
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1775,7 +1851,6 @@ config PCI
config PCI_DOMAINS
bool
- depends on PCI
source "drivers/pci/Kconfig"
@@ -1824,6 +1899,9 @@ config MMU
bool
default y
+config I8253
+ bool
+
config PCSPEAKER
bool
@@ -1840,21 +1918,6 @@ source "fs/Kconfig.binfmt"
config TRAD_SIGNALS
bool
-config BUILD_ELF64
- bool "Use 64-bit ELF format for building"
- depends on 64BIT
- help
- A 64-bit kernel is usually built using the 64-bit ELF binary object
- format as it's one that allows arbitrary 64-bit constructs. For
- kernels that are loaded within the KSEG compatibility segments the
- 32-bit ELF format can optionally be used resulting in a somewhat
- smaller binary, but this option is not explicitly supported by the
- toolchain and since binutils 2.14 it does not even work at all.
-
- Say Y to use the 64-bit format or N to use the 32-bit one.
-
- If unsure say Y.
-
config BINFMT_IRIX
bool "Include IRIX binary compatibility"
depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
diff --git a/trunk/arch/mips/Makefile b/trunk/arch/mips/Makefile
index 32c1c8fb6f98..ebd5d02a7d78 100644
--- a/trunk/arch/mips/Makefile
+++ b/trunk/arch/mips/Makefile
@@ -60,11 +60,6 @@ vmlinux-32 = vmlinux.32
vmlinux-64 = vmlinux
cflags-y += -mabi=64
-ifdef CONFIG_BUILD_ELF64
-cflags-y += $(call cc-option,-mno-explicit-relocs)
-else
-cflags-y += $(call cc-option,-msym32)
-endif
endif
all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32)
@@ -153,7 +148,8 @@ endif
#
# Firmware support
#
-libs-$(CONFIG_ARC) += arch/mips/arc/
+libs-$(CONFIG_ARC) += arch/mips/fw/arc/
+libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
#
@@ -366,6 +362,13 @@ core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/
cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite
load-$(CONFIG_BASLER_EXCITE) += 0x80100000
+#
+# LASAT platforms
+#
+core-$(CONFIG_LASAT) += arch/mips/lasat/
+cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat
+load-$(CONFIG_LASAT) += 0xffffffff80000000
+
#
# Common VR41xx
#
@@ -532,6 +535,13 @@ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
+#
+# Broadcom BCM47XX boards
+#
+core-$(CONFIG_BCM47XX) += arch/mips/bcm47xx/
+cflags-$(CONFIG_BCM47XX) += -Iinclude/asm-mips/mach-bcm47xx
+load-$(CONFIG_BCM47XX) := 0xffffffff80001000
+
#
# SNI RM
#
@@ -578,6 +588,26 @@ else
JIFFIES = jiffies_64
endif
+#
+# Automatically detect the build format. By default we choose
+# the elf format according to the load address.
+# We can always force a build with a 64-bits symbol format by
+# passing 'KBUILD_SYM32=no' option to the make's command line.
+#
+ifdef CONFIG_64BIT
+ ifndef KBUILD_SYM32
+ ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0)
+ KBUILD_SYM32 = y
+ endif
+ endif
+
+ ifeq ($(KBUILD_SYM32), y)
+ ifeq ($(call cc-option-yn,-msym32), y)
+ cflags-y += -msym32 -DKBUILD_64BIT_SYM32
+ endif
+ endif
+endif
+
AFLAGS += $(cflags-y)
CFLAGS += $(cflags-y) \
-D"VMLINUX_LOAD_ADDRESS=$(load-y)"
@@ -615,6 +645,11 @@ core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
+ifdef CONFIG_LASAT
+rom.bin rom.sw: vmlinux
+ $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
+endif
+
#
# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -658,6 +693,7 @@ endif
archclean:
@$(MAKE) $(clean)=arch/mips/boot
+ @$(MAKE) $(clean)=arch/mips/lasat
define archhelp
echo ' vmlinux.ecoff - ECOFF boot image'
diff --git a/trunk/arch/mips/au1000/common/dbdma.c b/trunk/arch/mips/au1000/common/dbdma.c
index 626de44bd888..461cf0139737 100644
--- a/trunk/arch/mips/au1000/common/dbdma.c
+++ b/trunk/arch/mips/au1000/common/dbdma.c
@@ -184,7 +184,7 @@ static dbdev_tab_t dbdev_tab[] = {
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
static dbdev_tab_t *
-find_dbdev_id (u32 id)
+find_dbdev_id(u32 id)
{
int i;
dbdev_tab_t *p;
@@ -213,7 +213,7 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev)
if ( NULL != p )
{
memcpy(p, dev, sizeof(dbdev_tab_t));
- p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+ p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
ret = p->dev_id;
new_id++;
#if 0
@@ -671,7 +671,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
* parts. If it is fixedin the future, these dma_cache_inv will just
* be nothing more than empty macros. See io.h.
* */
- dma_cache_inv((unsigned long)buf,nbytes);
+ dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
diff --git a/trunk/arch/mips/au1000/common/dbg_io.c b/trunk/arch/mips/au1000/common/dbg_io.c
index 0a50af7f34b8..79e0b0a51ace 100644
--- a/trunk/arch/mips/au1000/common/dbg_io.c
+++ b/trunk/arch/mips/au1000/common/dbg_io.c
@@ -53,7 +53,7 @@ typedef unsigned int uint32;
/* memory-mapped read/write of the port */
#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y,z) (au_writel(z&0xff, DEBUG_BASE + y))
+#define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
extern unsigned long get_au1x00_uart_baud_base(void);
extern unsigned long cal_r4koff(void);
diff --git a/trunk/arch/mips/au1000/common/irq.c b/trunk/arch/mips/au1000/common/irq.c
index ea6e99fbe2f7..a6640b998c6e 100644
--- a/trunk/arch/mips/au1000/common/irq.c
+++ b/trunk/arch/mips/au1000/common/irq.c
@@ -65,19 +65,6 @@
#define EXT_INTC1_REQ1 5 /* IP 5 */
#define MIPS_TIMER_IP 7 /* IP 7 */
-extern void set_debug_traps(void);
-extern irq_cpustat_t irq_stat [NR_CPUS];
-extern void mips_timer_interrupt(void);
-
-static void setup_local_irq(unsigned int irq, int type, int int_req);
-static void end_irq(unsigned int irq_nr);
-static inline void mask_and_ack_level_irq(unsigned int irq_nr);
-static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr);
-static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr);
-static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr);
-inline void local_enable_irq(unsigned int irq_nr);
-inline void local_disable_irq(unsigned int irq_nr);
-
void (*board_init_irq)(void);
static DEFINE_SPINLOCK(irq_lock);
@@ -646,7 +633,7 @@ asmlinkage void plat_irq_dispatch(void)
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
if (pending & CAUSEF_IP7)
- mips_timer_interrupt();
+ do_IRQ(63);
else if (pending & CAUSEF_IP2)
intc0_req0_irqdispatch();
else if (pending & CAUSEF_IP3)
diff --git a/trunk/arch/mips/au1000/common/pci.c b/trunk/arch/mips/au1000/common/pci.c
index 6c25e6c09f78..9be99a68932a 100644
--- a/trunk/arch/mips/au1000/common/pci.c
+++ b/trunk/arch/mips/au1000/common/pci.c
@@ -74,6 +74,7 @@ static int __init au1x_pci_setup(void)
printk(KERN_ERR "Unable to ioremap pci space\n");
return 1;
}
+ au1x_controller.io_map_base = virt_io_addr;
#ifdef CONFIG_DMA_NONCOHERENT
{
diff --git a/trunk/arch/mips/au1000/common/power.c b/trunk/arch/mips/au1000/common/power.c
index 3901e8e04755..6f57f72a7d57 100644
--- a/trunk/arch/mips/au1000/common/power.c
+++ b/trunk/arch/mips/au1000/common/power.c
@@ -211,7 +211,7 @@ int au_sleep(void)
unsigned long wakeup, flags;
extern void save_and_sleep(void);
- spin_lock_irqsave(&pm_lock,flags);
+ spin_lock_irqsave(&pm_lock, flags);
save_core_regs();
diff --git a/trunk/arch/mips/au1000/common/reset.c b/trunk/arch/mips/au1000/common/reset.c
index de5447e83849..b8638d293cf9 100644
--- a/trunk/arch/mips/au1000/common/reset.c
+++ b/trunk/arch/mips/au1000/common/reset.c
@@ -42,7 +42,7 @@ extern void (*flush_cache_all)(void);
void au1000_restart(char *command)
{
/* Set all integrated peripherals to disabled states */
- extern void board_reset (void);
+ extern void board_reset(void);
u32 prid = read_c0_prid();
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
diff --git a/trunk/arch/mips/au1000/common/setup.c b/trunk/arch/mips/au1000/common/setup.c
index a95b37773196..b212c0726125 100644
--- a/trunk/arch/mips/au1000/common/setup.c
+++ b/trunk/arch/mips/au1000/common/setup.c
@@ -50,7 +50,6 @@ extern void au1000_halt(void);
extern void au1000_power_off(void);
extern void au1x_time_init(void);
extern void au1x_timer_setup(struct irqaction *irq);
-extern void au1xxx_time_init(void);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
@@ -112,7 +111,6 @@ void __init plat_mem_setup(void)
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
pm_power_off = au1000_power_off;
- board_time_init = au1xxx_time_init;
/* IO/MEM resources. */
set_io_port_base(0);
diff --git a/trunk/arch/mips/au1000/common/time.c b/trunk/arch/mips/au1000/common/time.c
index 8fc29982d700..2556399708ba 100644
--- a/trunk/arch/mips/au1000/common/time.c
+++ b/trunk/arch/mips/au1000/common/time.c
@@ -64,48 +64,8 @@ static unsigned long last_pc0, last_match20;
static DEFINE_SPINLOCK(time_lock);
-static inline void ack_r4ktimer(unsigned long newval)
-{
- write_c0_compare(newval);
-}
-
-/*
- * There are a lot of conceptually broken versions of the MIPS timer interrupt
- * handler floating around. This one is rather different, but the algorithm
- * is provably more robust.
- */
unsigned long wtimer;
-void mips_timer_interrupt(void)
-{
- int irq = 63;
-
- irq_enter();
- kstat_this_cpu.irqs[irq]++;
-
- if (r4k_offset == 0)
- goto null;
-
- do {
- kstat_this_cpu.irqs[irq]++;
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
- r4k_cur += r4k_offset;
- ack_r4ktimer(r4k_cur);
-
- } while (((unsigned long)read_c0_count()
- - r4k_cur) < 0x7fffffff);
-
- irq_exit();
- return;
-
-null:
- ack_r4ktimer(0);
- irq_exit();
-}
-
#ifdef CONFIG_PM
irqreturn_t counter0_irq(int irq, void *dev_id)
{
@@ -240,7 +200,7 @@ unsigned long cal_r4koff(void)
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
- au_writel (0, SYS_TOYWRITE);
+ au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
@@ -329,7 +289,3 @@ void __init plat_timer_setup(struct irqaction *irq)
#endif
}
-
-void __init au1xxx_time_init(void)
-{
-}
diff --git a/trunk/arch/mips/au1000/db1x00/board_setup.c b/trunk/arch/mips/au1000/db1x00/board_setup.c
index 8b08edb977be..99eafeada518 100644
--- a/trunk/arch/mips/au1000/db1x00/board_setup.c
+++ b/trunk/arch/mips/au1000/db1x00/board_setup.c
@@ -46,7 +46,7 @@
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-void board_reset (void)
+void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
bcsr->swreset = 0x0000;
diff --git a/trunk/arch/mips/au1000/db1x00/init.c b/trunk/arch/mips/au1000/db1x00/init.c
index 0a3f025eb023..4d7bcfc8cf73 100644
--- a/trunk/arch/mips/au1000/db1x00/init.c
+++ b/trunk/arch/mips/au1000/db1x00/init.c
@@ -59,14 +59,12 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
- mips_machgroup = MACH_GROUP_ALCHEMY;
-
/* Set the platform # */
-#if defined (CONFIG_MIPS_DB1550)
+#if defined(CONFIG_MIPS_DB1550)
mips_machtype = MACH_DB1550;
-#elif defined (CONFIG_MIPS_DB1500)
+#elif defined(CONFIG_MIPS_DB1500)
mips_machtype = MACH_DB1500;
-#elif defined (CONFIG_MIPS_DB1100)
+#elif defined(CONFIG_MIPS_DB1100)
mips_machtype = MACH_DB1100;
#else
mips_machtype = MACH_DB1000;
diff --git a/trunk/arch/mips/au1000/mtx-1/board_setup.c b/trunk/arch/mips/au1000/mtx-1/board_setup.c
index 7bc5af8917da..abfc4bcddf7a 100644
--- a/trunk/arch/mips/au1000/mtx-1/board_setup.c
+++ b/trunk/arch/mips/au1000/mtx-1/board_setup.c
@@ -46,7 +46,7 @@
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
-void board_reset (void)
+void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
@@ -54,11 +54,11 @@ void board_reset (void)
void __init board_setup(void)
{
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
// enable USB power switch
au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
au_writel( 0x100000, GPIO2_OUTPUT );
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
diff --git a/trunk/arch/mips/au1000/mtx-1/init.c b/trunk/arch/mips/au1000/mtx-1/init.c
index 88f2b6d97281..2aa7b2ed6a8c 100644
--- a/trunk/arch/mips/au1000/mtx-1/init.c
+++ b/trunk/arch/mips/au1000/mtx-1/init.c
@@ -56,7 +56,6 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
- mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_MTX1; /* set the platform # */
prom_init_cmdline();
diff --git a/trunk/arch/mips/au1000/pb1000/board_setup.c b/trunk/arch/mips/au1000/pb1000/board_setup.c
index 824cfafaff92..5198c4f98b43 100644
--- a/trunk/arch/mips/au1000/pb1000/board_setup.c
+++ b/trunk/arch/mips/au1000/pb1000/board_setup.c
@@ -39,7 +39,7 @@
#include
#include
-void board_reset (void)
+void board_reset(void)
{
}
@@ -54,7 +54,7 @@ void __init board_setup(void)
au_writel(0, SYS_PINSTATERD);
udelay(100);
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
@@ -102,7 +102,7 @@ void __init board_setup(void)
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
au_writel(sys_clksrc, SYS_CLKSRC);
@@ -116,7 +116,7 @@ void __init board_setup(void)
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
// make gpio 15 an input (for interrupt line)
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
diff --git a/trunk/arch/mips/au1000/pb1000/init.c b/trunk/arch/mips/au1000/pb1000/init.c
index e9fa1bab81f3..4535f7208e18 100644
--- a/trunk/arch/mips/au1000/pb1000/init.c
+++ b/trunk/arch/mips/au1000/pb1000/init.c
@@ -54,7 +54,6 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
- mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1000;
prom_init_cmdline();
diff --git a/trunk/arch/mips/au1000/pb1100/board_setup.c b/trunk/arch/mips/au1000/pb1100/board_setup.c
index 6bc1f8e1b608..42874a6b31d1 100644
--- a/trunk/arch/mips/au1000/pb1100/board_setup.c
+++ b/trunk/arch/mips/au1000/pb1100/board_setup.c
@@ -39,7 +39,7 @@
#include
#include
-void board_reset (void)
+void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
@@ -54,7 +54,7 @@ void __init board_setup(void)
au_writel(0, SYS_PININPUTEN);
udelay(100);
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
{
u32 pin_func, sys_freqctrl, sys_clksrc;
@@ -98,7 +98,7 @@ void __init board_setup(void)
pin_func |= 0x8000;
au_writel(pin_func, SYS_PINFUNC);
}
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
diff --git a/trunk/arch/mips/au1000/pb1100/init.c b/trunk/arch/mips/au1000/pb1100/init.c
index 6131b56f41b5..7ba6852de7cd 100644
--- a/trunk/arch/mips/au1000/pb1100/init.c
+++ b/trunk/arch/mips/au1000/pb1100/init.c
@@ -55,7 +55,6 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg3;
- mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1100;
prom_init_cmdline();
diff --git a/trunk/arch/mips/au1000/pb1200/board_setup.c b/trunk/arch/mips/au1000/pb1200/board_setup.c
index eea2092bde8d..2122515f79d7 100644
--- a/trunk/arch/mips/au1000/pb1200/board_setup.c
+++ b/trunk/arch/mips/au1000/pb1200/board_setup.c
@@ -57,7 +57,7 @@
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
-void board_reset (void)
+void board_reset(void)
{
bcsr->resets = 0;
bcsr->system = 0;
@@ -148,7 +148,7 @@ void __init board_setup(void)
}
int
-board_au1200fb_panel (void)
+board_au1200fb_panel(void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
@@ -160,7 +160,7 @@ board_au1200fb_panel (void)
}
int
-board_au1200fb_panel_init (void)
+board_au1200fb_panel_init(void)
{
/* Apply power */
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
@@ -170,7 +170,7 @@ board_au1200fb_panel_init (void)
}
int
-board_au1200fb_panel_shutdown (void)
+board_au1200fb_panel_shutdown(void)
{
/* Remove power */
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
diff --git a/trunk/arch/mips/au1000/pb1200/init.c b/trunk/arch/mips/au1000/pb1200/init.c
index 27f09e374e15..5a70029d5388 100644
--- a/trunk/arch/mips/au1000/pb1200/init.c
+++ b/trunk/arch/mips/au1000/pb1200/init.c
@@ -55,7 +55,6 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
- mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1200;
prom_init_cmdline();
diff --git a/trunk/arch/mips/au1000/pb1200/irqmap.c b/trunk/arch/mips/au1000/pb1200/irqmap.c
index b73b2d18bf56..7c708db04a88 100644
--- a/trunk/arch/mips/au1000/pb1200/irqmap.c
+++ b/trunk/arch/mips/au1000/pb1200/irqmap.c
@@ -132,7 +132,7 @@ static void pb1200_shutdown_irq( unsigned int irq_nr )
pb1200_disable_irq(irq_nr);
if (--pb1200_cascade_en == 0)
{
- free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
+ free_irq(AU1000_GPIO_7, &pb1200_cascade_handler );
}
return;
}
diff --git a/trunk/arch/mips/au1000/pb1500/board_setup.c b/trunk/arch/mips/au1000/pb1500/board_setup.c
index c9b655616fb3..5446836869d6 100644
--- a/trunk/arch/mips/au1000/pb1500/board_setup.c
+++ b/trunk/arch/mips/au1000/pb1500/board_setup.c
@@ -39,7 +39,7 @@
#include
#include
-void board_reset (void)
+void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
@@ -56,7 +56,7 @@ void __init board_setup(void)
au_writel(0, SYS_PINSTATERD);
udelay(100);
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
@@ -85,7 +85,7 @@ void __init board_setup(void)
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
au_writel(sys_clksrc, SYS_CLKSRC);
@@ -95,7 +95,7 @@ void __init board_setup(void)
// 2nd USB port is USB host
pin_func |= 0x8000;
au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
diff --git a/trunk/arch/mips/au1000/pb1500/init.c b/trunk/arch/mips/au1000/pb1500/init.c
index 733d2e469db2..e58a9d6c5021 100644
--- a/trunk/arch/mips/au1000/pb1500/init.c
+++ b/trunk/arch/mips/au1000/pb1500/init.c
@@ -55,7 +55,6 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
- mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1500;
prom_init_cmdline();
diff --git a/trunk/arch/mips/au1000/pb1550/board_setup.c b/trunk/arch/mips/au1000/pb1550/board_setup.c
index 05fd27dc24e6..e3cfb0d73180 100644
--- a/trunk/arch/mips/au1000/pb1550/board_setup.c
+++ b/trunk/arch/mips/au1000/pb1550/board_setup.c
@@ -44,7 +44,7 @@
#include
#include
-void board_reset (void)
+void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
diff --git a/trunk/arch/mips/au1000/pb1550/init.c b/trunk/arch/mips/au1000/pb1550/init.c
index 41daa3371be3..fad53bf5aad1 100644
--- a/trunk/arch/mips/au1000/pb1550/init.c
+++ b/trunk/arch/mips/au1000/pb1550/init.c
@@ -55,7 +55,6 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
- mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1550;
prom_init_cmdline();
diff --git a/trunk/arch/mips/au1000/xxs1500/board_setup.c b/trunk/arch/mips/au1000/xxs1500/board_setup.c
index ae3d6b19e94d..a9237f41933d 100644
--- a/trunk/arch/mips/au1000/xxs1500/board_setup.c
+++ b/trunk/arch/mips/au1000/xxs1500/board_setup.c
@@ -39,7 +39,7 @@
#include
#include
-void board_reset (void)
+void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
diff --git a/trunk/arch/mips/au1000/xxs1500/init.c b/trunk/arch/mips/au1000/xxs1500/init.c
index f1c76533b6fc..9f839c36f69e 100644
--- a/trunk/arch/mips/au1000/xxs1500/init.c
+++ b/trunk/arch/mips/au1000/xxs1500/init.c
@@ -54,7 +54,6 @@ void __init prom_init(void)
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
- mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_XXS1500; /* set the platform # */
prom_init_cmdline();
diff --git a/trunk/arch/mips/basler/excite/excite_prom.c b/trunk/arch/mips/basler/excite/excite_prom.c
index 6ecd512b999d..2d752c2f6e59 100644
--- a/trunk/arch/mips/basler/excite/excite_prom.c
+++ b/trunk/arch/mips/basler/excite/excite_prom.c
@@ -136,7 +136,6 @@ void __init prom_init(void)
# error 64 bit support not implemented
#endif /* CONFIG_64BIT */
- mips_machgroup = MACH_GROUP_TITAN;
mips_machtype = MACH_TITAN_EXCITE;
}
diff --git a/trunk/arch/mips/basler/excite/excite_setup.c b/trunk/arch/mips/basler/excite/excite_setup.c
index 56003188f17c..404ca9284b30 100644
--- a/trunk/arch/mips/basler/excite/excite_setup.c
+++ b/trunk/arch/mips/basler/excite/excite_setup.c
@@ -68,7 +68,7 @@ DEFINE_SPINLOCK(titan_lock);
int titan_irqflags;
-static void excite_timer_init(void)
+void __init plat_time_init(void)
{
const u32 modebit5 = ocd_readl(0x00e4);
unsigned int
@@ -216,7 +216,7 @@ static int __init excite_platform_init(void)
titan_writel(0x80021dff, GXCFG); /* XDMA reset */
titan_writel(0x00000000, CPXCISRA);
titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */
-#if defined (CONFIG_HIGHMEM)
+#if defined(CONFIG_HIGHMEM)
# error change for HIGHMEM support!
#else
titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */
@@ -261,16 +261,13 @@ void __init plat_mem_setup(void)
/* Announce RAM to system */
add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
- /* Set up timer initialization hooks */
- board_time_init = excite_timer_init;
-
/* Set up the peripheral address map */
- *(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;
- *(boot_ocd_base + (LKB10 / sizeof (u32))) = 0;
- *(boot_ocd_base + (LKB11 / sizeof (u32))) = 0;
- *(boot_ocd_base + (LKB12 / sizeof (u32))) = 0;
+ *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0;
+ *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0;
+ *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0;
+ *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0;
wmb();
- *(boot_ocd_base + (LKB0 / sizeof (u32))) = EXCITE_PHYS_OCD >> 4;
+ *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4;
wmb();
ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
diff --git a/trunk/arch/mips/bcm47xx/Makefile b/trunk/arch/mips/bcm47xx/Makefile
new file mode 100644
index 000000000000..35294b12d638
--- /dev/null
+++ b/trunk/arch/mips/bcm47xx/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the BCM47XX specific kernel interface routines
+# under Linux.
+#
+
+obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
diff --git a/trunk/arch/mips/bcm47xx/gpio.c b/trunk/arch/mips/bcm47xx/gpio.c
new file mode 100644
index 000000000000..f5a53acf995a
--- /dev/null
+++ b/trunk/arch/mips/bcm47xx/gpio.c
@@ -0,0 +1,79 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Aurelien Jarno
+ */
+
+#include
+#include
+#include
+#include
+#include
+
+int bcm47xx_gpio_to_irq(unsigned gpio)
+{
+ if (ssb_bcm47xx.chipco.dev)
+ return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
+ else if (ssb_bcm47xx.extif.dev)
+ return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
+ else
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(bcm47xx_gpio_to_irq);
+
+int bcm47xx_gpio_get_value(unsigned gpio)
+{
+ if (ssb_bcm47xx.chipco.dev)
+ return ssb_chipco_gpio_in(&ssb_bcm47xx.chipco, 1 << gpio);
+ else if (ssb_bcm47xx.extif.dev)
+ return ssb_extif_gpio_in(&ssb_bcm47xx.extif, 1 << gpio);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm47xx_gpio_get_value);
+
+void bcm47xx_gpio_set_value(unsigned gpio, int value)
+{
+ if (ssb_bcm47xx.chipco.dev)
+ ssb_chipco_gpio_out(&ssb_bcm47xx.chipco,
+ 1 << gpio,
+ value ? 1 << gpio : 0);
+ else if (ssb_bcm47xx.extif.dev)
+ ssb_extif_gpio_out(&ssb_bcm47xx.extif,
+ 1 << gpio,
+ value ? 1 << gpio : 0);
+}
+EXPORT_SYMBOL_GPL(bcm47xx_gpio_set_value);
+
+int bcm47xx_gpio_direction_input(unsigned gpio)
+{
+ if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
+ ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
+ 1 << gpio, 0);
+ else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
+ ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
+ 1 << gpio, 0);
+ else
+ return -EINVAL;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_input);
+
+int bcm47xx_gpio_direction_output(unsigned gpio, int value)
+{
+ bcm47xx_gpio_set_value(gpio, value);
+
+ if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
+ ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
+ 1 << gpio, 1 << gpio);
+ else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
+ ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
+ 1 << gpio, 1 << gpio);
+ else
+ return -EINVAL;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_output);
+
diff --git a/trunk/arch/mips/bcm47xx/irq.c b/trunk/arch/mips/bcm47xx/irq.c
new file mode 100644
index 000000000000..325757acd020
--- /dev/null
+++ b/trunk/arch/mips/bcm47xx/irq.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include
+#include
+#include
+#include
+
+void plat_irq_dispatch(void)
+{
+ u32 cause;
+
+ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP;
+
+ clear_c0_status(cause);
+
+ if (cause & CAUSEF_IP7)
+ do_IRQ(7);
+ if (cause & CAUSEF_IP2)
+ do_IRQ(2);
+ if (cause & CAUSEF_IP3)
+ do_IRQ(3);
+ if (cause & CAUSEF_IP4)
+ do_IRQ(4);
+ if (cause & CAUSEF_IP5)
+ do_IRQ(5);
+ if (cause & CAUSEF_IP6)
+ do_IRQ(6);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+}
diff --git a/trunk/arch/mips/bcm47xx/prom.c b/trunk/arch/mips/bcm47xx/prom.c
new file mode 100644
index 000000000000..079e33d52783
--- /dev/null
+++ b/trunk/arch/mips/bcm47xx/prom.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer
+ * Copyright (C) 2007 Aurelien Jarno
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+static int cfe_cons_handle;
+
+const char *get_system_type(void)
+{
+ return "Broadcom BCM47XX";
+}
+
+void prom_putchar(char c)
+{
+ while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+ ;
+}
+
+static __init void prom_init_cfe(void)
+{
+ uint32_t cfe_ept;
+ uint32_t cfe_handle;
+ uint32_t cfe_eptseal;
+ int argc = fw_arg0;
+ char **envp = (char **) fw_arg2;
+ int *prom_vec = (int *) fw_arg3;
+
+ /*
+ * Check if a loader was used; if NOT, the 4 arguments are
+ * what CFE gives us (handle, 0, EPT and EPTSEAL)
+ */
+ if (argc < 0) {
+ cfe_handle = (uint32_t)argc;
+ cfe_ept = (uint32_t)envp;
+ cfe_eptseal = (uint32_t)prom_vec;
+ } else {
+ if ((int)prom_vec < 0) {
+ /*
+ * Old loader; all it gives us is the handle,
+ * so use the "known" entrypoint and assume
+ * the seal.
+ */
+ cfe_handle = (uint32_t)prom_vec;
+ cfe_ept = 0xBFC00500;
+ cfe_eptseal = CFE_EPTSEAL;
+ } else {
+ /*
+ * Newer loaders bundle the handle/ept/eptseal
+ * Note: prom_vec is in the loader's useg
+ * which is still alive in the TLB.
+ */
+ cfe_handle = prom_vec[0];
+ cfe_ept = prom_vec[2];
+ cfe_eptseal = prom_vec[3];
+ }
+ }
+
+ if (cfe_eptseal != CFE_EPTSEAL) {
+ /* too early for panic to do any good */
+ printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+ while (1) ;
+ }
+
+ cfe_init(cfe_handle, cfe_ept);
+}
+
+static __init void prom_init_console(void)
+{
+ /* Initialize CFE console */
+ cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+}
+
+static __init void prom_init_cmdline(void)
+{
+ char buf[CL_SIZE];
+
+ /* Get the kernel command line from CFE */
+ if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
+ buf[CL_SIZE-1] = 0;
+ strcpy(arcs_cmdline, buf);
+ }
+
+ /* Force a console handover by adding a console= argument if needed,
+ * as CFE is not available anymore later in the boot process. */
+ if ((strstr(arcs_cmdline, "console=")) == NULL) {
+ /* Try to read the default serial port used by CFE */
+ if ((cfe_getenv("BOOT_CONSOLE", buf, CL_SIZE) < 0)
+ || (strncmp("uart", buf, 4)))
+ /* Default to uart0 */
+ strcpy(buf, "uart0");
+
+ /* Compute the new command line */
+ snprintf(arcs_cmdline, CL_SIZE, "%s console=ttyS%c,115200",
+ arcs_cmdline, buf[4]);
+ }
+}
+
+static __init void prom_init_mem(void)
+{
+ unsigned long mem;
+
+ /* Figure out memory size by finding aliases.
+ *
+ * We should theoretically use the mapping from CFE using cfe_enummem().
+ * However as the BCM47XX is mostly used on low-memory systems, we
+ * want to reuse the memory used by CFE (around 4MB). That means cfe_*
+ * functions stop to work at some point during the boot, we should only
+ * call them at the beginning of the boot.
+ */
+ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
+ if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
+ *(unsigned long *)(prom_init))
+ break;
+ }
+
+ add_memory_region(0, mem, BOOT_MEM_RAM);
+}
+
+void __init prom_init(void)
+{
+ prom_init_cfe();
+ prom_init_console();
+ prom_init_cmdline();
+ prom_init_mem();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
diff --git a/trunk/arch/mips/bcm47xx/serial.c b/trunk/arch/mips/bcm47xx/serial.c
new file mode 100644
index 000000000000..59c11afdb2ab
--- /dev/null
+++ b/trunk/arch/mips/bcm47xx/serial.c
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Aurelien Jarno
+ */
+
+#include
+#include
+#include
+#include
+#include