diff --git a/[refs] b/[refs] index 7dd1d56b1b86..4330debd8522 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 86adf8adfcb3d3f4b6c30aeb40da480da02de1d1 +refs/heads/master: 2226b1c219a18804bc40e32a5d53c287a6c925d9 diff --git a/trunk/.mailmap b/trunk/.mailmap index 4e83e7b52d15..97f7b4fb6139 100644 --- a/trunk/.mailmap +++ b/trunk/.mailmap @@ -32,7 +32,6 @@ Christoph Hellwig Corey Minyard David Brownell David Woodhouse -Dmitry Eremin-Solenikov Domen Puncer Douglas Gilbert Ed L. Cashin diff --git a/trunk/CREDITS b/trunk/CREDITS index 2b39168c06aa..abe05a0be4ed 100644 --- a/trunk/CREDITS +++ b/trunk/CREDITS @@ -464,11 +464,6 @@ S: 1200 Goldenrod Dr. S: Nampa, Idaho 83686 S: USA -N: Dirk J. Brandewie -E: dirk.j.brandewie@intel.com -E: linux-wimax@intel.com -D: Intel Wireless WiMAX Connection 2400 SDIO driver - N: Derrick J. Brashear E: shadow@dementia.org W: http://www.dementia.org/~shadow @@ -1686,7 +1681,7 @@ E: ajoshi@shell.unixbox.com D: fbdev hacking N: Jesper Juhl -E: jj@chaosbits.net +E: jesper.juhl@gmail.com D: Various fixes, cleanups and minor features all over the tree. D: Wrote initial version of the hdaps driver (since passed on to others). S: Lemnosvej 1, 3.tv @@ -2124,11 +2119,6 @@ N: H.J. Lu E: hjl@gnu.ai.mit.edu D: GCC + libraries hacker -N: Yanir Lubetkin -E: yanirx.lubatkin@intel.com -E: linux-wimax@intel.com -D: Intel Wireless WiMAX Connection 2400 driver - N: Michal Ludvig E: michal@logix.cz E: michal.ludvig@asterisk.co.nz @@ -2703,13 +2693,6 @@ S: RR #5, 497 Pole Line Road S: Thunder Bay, Ontario S: CANADA P7C 5M9 -N: Inaky Perez-Gonzalez -E: inaky.perez-gonzalez@intel.com -E: linux-wimax@intel.com -E: inakypg@yahoo.com -D: WiMAX stack -D: Intel Wireless WiMAX Connection 2400 driver - N: Yuri Per E: yuri@pts.mipt.ru D: Some smbfs fixes @@ -3786,11 +3769,14 @@ S: The Netherlands N: David Woodhouse E: dwmw2@infradead.org -D: JFFS2 file system, Memory Technology Device subsystem, +D: ARCnet stuff, Applicom board driver, SO_BINDTODEVICE, +D: some Alpha platform porting from 2.0, Memory Technology Devices, +D: Acquire watchdog timer, PC speaker driver maintenance, D: various other stuff that annoyed me by not working. -S: c/o Intel Corporation -S: Pipers Way -S: Swindon. SN3 1RJ +S: c/o Red Hat Engineering +S: Rustat House +S: 60 Clifton Road +S: Cambridge. CB1 7EG S: England N: Chris Wright diff --git a/trunk/Documentation/ABI/testing/sysfs-class-regulator b/trunk/Documentation/ABI/testing/sysfs-class-regulator index 873ef1fc1569..3731f6f29bcb 100644 --- a/trunk/Documentation/ABI/testing/sysfs-class-regulator +++ b/trunk/Documentation/ABI/testing/sysfs-class-regulator @@ -3,9 +3,8 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called - state. This reports the regulator enable status, for - regulators which can report that value. + Each regulator directory will contain a field called + state. This holds the regulator output state. This will be one of the following strings: @@ -19,8 +18,7 @@ Description: 'disabled' means the regulator output is OFF and is not supplying power to the system.. - 'unknown' means software cannot determine the state, or - the reported state is invalid. + 'unknown' means software cannot determine the state. NOTE: this field can be used in conjunction with microvolts and microamps to determine regulator output levels. @@ -55,10 +53,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called microvolts. This holds the regulator output voltage setting - measured in microvolts (i.e. E-6 Volts), for regulators - which can report that voltage. + measured in microvolts (i.e. E-6 Volts). NOTE: This value should not be used to determine the regulator output voltage level as this value is the same regardless of @@ -70,10 +67,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called microamps. This holds the regulator output current limit - setting measured in microamps (i.e. E-6 Amps), for regulators - which can report that current. + setting measured in microamps (i.e. E-6 Amps). NOTE: This value should not be used to determine the regulator output current level as this value is the same regardless of @@ -85,9 +81,8 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called - opmode. This holds the current regulator operating mode, - for regulators which can report it. + Each regulator directory will contain a field called + opmode. This holds the regulator operating mode setting. The opmode value can be one of the following strings: @@ -97,7 +92,7 @@ Description: 'standby' 'unknown' - The modes are described in include/linux/regulator/consumer.h + The modes are described in include/linux/regulator/regulator.h NOTE: This value should not be used to determine the regulator output operating mode as this value is the same regardless of @@ -109,10 +104,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called min_microvolts. This holds the minimum safe working regulator - output voltage setting for this domain measured in microvolts, - for regulators which support voltage constraints. + output voltage setting for this domain measured in microvolts. NOTE: this will return the string 'constraint not defined' if the power domain has no min microvolts constraint defined by @@ -124,10 +118,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called max_microvolts. This holds the maximum safe working regulator - output voltage setting for this domain measured in microvolts, - for regulators which support voltage constraints. + output voltage setting for this domain measured in microvolts. NOTE: this will return the string 'constraint not defined' if the power domain has no max microvolts constraint defined by @@ -139,10 +132,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called min_microamps. This holds the minimum safe working regulator output current limit setting for this domain measured in - microamps, for regulators which support current constraints. + microamps. NOTE: this will return the string 'constraint not defined' if the power domain has no min microamps constraint defined by @@ -154,10 +147,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called max_microamps. This holds the maximum safe working regulator output current limit setting for this domain measured in - microamps, for regulators which support current constraints. + microamps. NOTE: this will return the string 'constraint not defined' if the power domain has no max microamps constraint defined by @@ -192,7 +185,7 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called requested_microamps. This holds the total requested load current in microamps for this regulator from all its consumer devices. @@ -211,102 +204,125 @@ Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_mem_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to memory, for voltage regulators - implementing suspend voltage configuration constraints. + the system is suspended to memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory voltage defined by + platform code. What: /sys/class/regulator/.../suspend_disk_microvolts Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_disk_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to disk, for voltage regulators - implementing suspend voltage configuration constraints. + the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk voltage defined by + platform code. What: /sys/class/regulator/.../suspend_standby_microvolts Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_standby_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to standby, for voltage regulators - implementing suspend voltage configuration constraints. + the system is suspended to standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby voltage defined by + platform code. What: /sys/class/regulator/.../suspend_mem_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_mem_mode. This holds the regulator operating mode setting for this domain when the system is suspended to - memory, for regulators implementing suspend mode - configuration constraints. + memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory mode defined by + platform code. What: /sys/class/regulator/.../suspend_disk_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_disk_mode. This holds the regulator operating mode - setting for this domain when the system is suspended to disk, - for regulators implementing suspend mode configuration - constraints. + setting for this domain when the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk mode defined by + platform code. What: /sys/class/regulator/.../suspend_standby_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_standby_mode. This holds the regulator operating mode setting for this domain when the system is suspended to - standby, for regulators implementing suspend mode - configuration constraints. + standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby mode defined by + platform code. What: /sys/class/regulator/.../suspend_mem_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_mem_state. This holds the regulator operating state - when suspended to memory, for regulators implementing suspend - configuration constraints. + when suspended to memory. + + This will be one of the following strings: - This will be one of the same strings reported by - the "state" attribute. + 'enabled' + 'disabled' + 'not defined' What: /sys/class/regulator/.../suspend_disk_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_disk_state. This holds the regulator operating state - when suspended to disk, for regulators implementing - suspend configuration constraints. + when suspended to disk. + + This will be one of the following strings: - This will be one of the same strings reported by - the "state" attribute. + 'enabled' + 'disabled' + 'not defined' What: /sys/class/regulator/.../suspend_standby_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood Description: - Some regulator directories will contain a field called + Each regulator directory will contain a field called suspend_standby_state. This holds the regulator operating - state when suspended to standby, for regulators implementing - suspend configuration constraints. + state when suspended to standby. + + This will be one of the following strings: - This will be one of the same strings reported by - the "state" attribute. + 'enabled' + 'disabled' + 'not defined' diff --git a/trunk/Documentation/ABI/testing/sysfs-devices-memory b/trunk/Documentation/ABI/testing/sysfs-devices-memory index 9fe91c02ee40..7a16fe1e2270 100644 --- a/trunk/Documentation/ABI/testing/sysfs-devices-memory +++ b/trunk/Documentation/ABI/testing/sysfs-devices-memory @@ -6,6 +6,7 @@ Description: internal state of the kernel memory blocks. Files could be added or removed dynamically to represent hot-add/remove operations. + Users: hotplug memory add/remove tools https://w3.opensource.ibm.com/projects/powerpc-utils/ @@ -18,56 +19,6 @@ Description: This is useful for a user-level agent to determine identify removable sections of the memory before attempting potentially expensive hot-remove memory operation -Users: hotplug memory remove tools - https://w3.opensource.ibm.com/projects/powerpc-utils/ - -What: /sys/devices/system/memory/memoryX/phys_device -Date: September 2008 -Contact: Badari Pulavarty -Description: - The file /sys/devices/system/memory/memoryX/phys_device - is read-only and is designed to show the name of physical - memory device. Implementation is currently incomplete. -What: /sys/devices/system/memory/memoryX/phys_index -Date: September 2008 -Contact: Badari Pulavarty -Description: - The file /sys/devices/system/memory/memoryX/phys_index - is read-only and contains the section ID in hexadecimal - which is equivalent to decimal X contained in the - memory section directory name. - -What: /sys/devices/system/memory/memoryX/state -Date: September 2008 -Contact: Badari Pulavarty -Description: - The file /sys/devices/system/memory/memoryX/state - is read-write. When read, it's contents show the - online/offline state of the memory section. When written, - root can toggle the the online/offline state of a removable - memory section (see removable file description above) - using the following commands. - # echo online > /sys/devices/system/memory/memoryX/state - # echo offline > /sys/devices/system/memory/memoryX/state - - For example, if /sys/devices/system/memory/memory22/removable - contains a value of 1 and - /sys/devices/system/memory/memory22/state contains the - string "online" the following command can be executed by - by root to offline that section. - # echo offline > /sys/devices/system/memory/memory22/state Users: hotplug memory remove tools https://w3.opensource.ibm.com/projects/powerpc-utils/ - -What: /sys/devices/system/node/nodeX/memoryY -Date: September 2008 -Contact: Gary Hade -Description: - When CONFIG_NUMA is enabled - /sys/devices/system/node/nodeX/memoryY is a symbolic link that - points to the corresponding /sys/devices/system/memory/memoryY - memory section directory. For example, the following symbolic - link is created for memory section 9 on node0. - /sys/devices/system/node/node0/memory9 -> ../../memory/memory9 - diff --git a/trunk/Documentation/Changes b/trunk/Documentation/Changes index b95082be4d5e..cb2b141b1c3e 100644 --- a/trunk/Documentation/Changes +++ b/trunk/Documentation/Changes @@ -33,12 +33,10 @@ o Gnu make 3.79.1 # make --version o binutils 2.12 # ld -v o util-linux 2.10o # fdformat --version o module-init-tools 0.9.10 # depmod -V -o e2fsprogs 1.41.4 # e2fsck -V +o e2fsprogs 1.29 # tune2fs o jfsutils 1.1.3 # fsck.jfs -V o reiserfsprogs 3.6.3 # reiserfsck -V 2>&1|grep reiserfsprogs o xfsprogs 2.6.0 # xfs_db -V -o squashfs-tools 4.0 # mksquashfs -version -o btrfs-progs 0.18 # btrfsck o pcmciautils 004 # pccardctl -V o quota-tools 3.09 # quota -V o PPP 2.4.0 # pppd --version diff --git a/trunk/Documentation/CodingStyle b/trunk/Documentation/CodingStyle index 72968cd5eaf3..1875e502f872 100644 --- a/trunk/Documentation/CodingStyle +++ b/trunk/Documentation/CodingStyle @@ -483,25 +483,17 @@ values. To do the latter, you can stick the following in your .emacs file: (* (max steps 1) c-basic-offset))) -(add-hook 'c-mode-common-hook - (lambda () - ;; Add kernel style - (c-add-style - "linux-tabs-only" - '("linux" (c-offsets-alist - (arglist-cont-nonempty - c-lineup-gcc-asm-reg - c-lineup-arglist-tabs-only)))))) - (add-hook 'c-mode-hook (lambda () (let ((filename (buffer-file-name))) ;; Enable kernel mode for the appropriate files (when (and filename - (string-match (expand-file-name "~/src/linux-trees") - filename)) + (string-match "~/src/linux-trees" filename)) (setq indent-tabs-mode t) - (c-set-style "linux-tabs-only"))))) + (c-set-style "linux") + (c-set-offset 'arglist-cont-nonempty + '(c-lineup-gcc-asm-reg + c-lineup-arglist-tabs-only)))))) This will make emacs go better with the kernel coding style for C files below ~/src/linux-trees. diff --git a/trunk/Documentation/DMA-API.txt b/trunk/Documentation/DMA-API.txt index 2a3fcc55e981..b462bb149543 100644 --- a/trunk/Documentation/DMA-API.txt +++ b/trunk/Documentation/DMA-API.txt @@ -5,7 +5,7 @@ This document describes the DMA API. For a more gentle introduction phrased in terms of the pci_ equivalents (and actual examples) see -Documentation/PCI/PCI-DMA-mapping.txt. +DMA-mapping.txt This API is split into two pieces. Part I describes the API and the corresponding pci_ API. Part II describes the extensions to the API @@ -170,15 +170,16 @@ Returns: 0 if successful and a negative error if not. u64 dma_get_required_mask(struct device *dev) -This API returns the mask that the platform requires to -operate efficiently. Usually this means the returned mask +After setting the mask with dma_set_mask(), this API returns the +actual mask (within that already set) that the platform actually +requires to operate efficiently. Usually this means the returned mask is the minimum required to cover all of memory. Examining the required mask gives drivers with variable descriptor sizes the opportunity to use smaller descriptors as necessary. Requesting the required mask does not alter the current mask. If you -wish to take advantage of it, you should issue a dma_set_mask() -call to set the mask to the value returned. +wish to take advantage of it, you should issue another dma_set_mask() +call to lower the mask again. Part Id - Streaming DMA mappings diff --git a/trunk/Documentation/DMA-mapping.txt b/trunk/Documentation/DMA-mapping.txt index b2a4d6d244d9..c74fec8c2351 100644 --- a/trunk/Documentation/DMA-mapping.txt +++ b/trunk/Documentation/DMA-mapping.txt @@ -26,7 +26,7 @@ mapped only for the time they are actually used and unmapped after the DMA transfer. The following API will work of course even on platforms where no such -hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on +hardware exists, see e.g. include/asm-i386/pci.h for how it is implemented on top of the virt_to_bus interface. First of all, you should make sure diff --git a/trunk/Documentation/DocBook/Makefile b/trunk/Documentation/DocBook/Makefile index dc3154e49279..0a08126d3094 100644 --- a/trunk/Documentation/DocBook/Makefile +++ b/trunk/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml sh.xml regulator.xml + mac80211.xml debugobjects.xml sh.xml ### # The build process is as follows (targets): diff --git a/trunk/Documentation/DocBook/networking.tmpl b/trunk/Documentation/DocBook/networking.tmpl index 59ad69a9d777..627707a3cb9d 100644 --- a/trunk/Documentation/DocBook/networking.tmpl +++ b/trunk/Documentation/DocBook/networking.tmpl @@ -74,14 +74,6 @@ !Enet/sunrpc/rpcb_clnt.c !Enet/sunrpc/clnt.c - WiMAX -!Enet/wimax/op-msg.c -!Enet/wimax/op-reset.c -!Enet/wimax/op-rfkill.c -!Enet/wimax/stack.c -!Iinclude/net/wimax.h -!Iinclude/linux/wimax.h - diff --git a/trunk/Documentation/DocBook/regulator.tmpl b/trunk/Documentation/DocBook/regulator.tmpl deleted file mode 100644 index 53f4f8d3b810..000000000000 --- a/trunk/Documentation/DocBook/regulator.tmpl +++ /dev/null @@ -1,304 +0,0 @@ - - - - - - Voltage and current regulator API - - - - Liam - Girdwood - -
- lrg@slimlogic.co.uk -
- - - - Mark - Brown - - Wolfson Microelectronics -
- broonie@opensource.wolfsonmicro.com -
- - - - - - 2007-2008 - Wolfson Microelectronics - - - 2008 - Liam Girdwood - - - - - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License version 2 as published by the Free Software Foundation. - - - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - For more details see the file COPYING in the source - distribution of Linux. - - - - - - - - Introduction - - This framework is designed to provide a standard kernel - interface to control voltage and current regulators. - - - The intention is to allow systems to dynamically control - regulator power output in order to save power and prolong - battery life. This applies to both voltage regulators (where - voltage output is controllable) and current sinks (where current - limit is controllable). - - - Note that additional (and currently more complete) documentation - is available in the Linux kernel source under - Documentation/power/regulator. - - - - Glossary - - The regulator API uses a number of terms which may not be - familiar: - - - - - Regulator - - - Electronic device that supplies power to other devices. Most - regulators can enable and disable their output and some can also - control their output voltage or current. - - - - - - Consumer - - - Electronic device which consumes power provided by a regulator. - These may either be static, requiring only a fixed supply, or - dynamic, requiring active management of the regulator at - runtime. - - - - - - Power Domain - - - The electronic circuit supplied by a given regulator, including - the regulator and all consumer devices. The configuration of - the regulator is shared between all the components in the - circuit. - - - - - - Power Management Integrated Circuit - PMIC - - - An IC which contains numerous regulators and often also other - subsystems. In an embedded system the primary PMIC is often - equivalent to a combination of the PSU and southbridge in a - desktop system. - - - - - - - - - Consumer driver interface - - This offers a similar API to the kernel clock framework. - Consumer drivers use get and put operations to acquire and - release regulators. Functions are - provided to enable - and disable the - reguator and to get and set the runtime parameters of the - regulator. - - - When requesting regulators consumers use symbolic names for their - supplies, such as "Vcc", which are mapped into actual regulator - devices by the machine interface. - - - A stub version of this API is provided when the regulator - framework is not in use in order to minimise the need to use - ifdefs. - - - - Enabling and disabling - - The regulator API provides reference counted enabling and - disabling of regulators. Consumer devices use the regulator_enable - and regulator_disable - functions to enable and disable regulators. Calls - to the two functions must be balanced. - - - Note that since multiple consumers may be using a regulator and - machine constraints may not allow the regulator to be disabled - there is no guarantee that calling - regulator_disable will actually cause the - supply provided by the regulator to be disabled. Consumer - drivers should assume that the regulator may be enabled at all - times. - - - - - Configuration - - Some consumer devices may need to be able to dynamically - configure their supplies. For example, MMC drivers may need to - select the correct operating voltage for their cards. This may - be done while the regulator is enabled or disabled. - - - The regulator_set_voltage - and regulator_set_current_limit - functions provide the primary interface for this. - Both take ranges of voltages and currents, supporting drivers - that do not require a specific value (eg, CPU frequency scaling - normally permits the CPU to use a wider range of supply - voltages at lower frequencies but does not require that the - supply voltage be lowered). Where an exact value is required - both minimum and maximum values should be identical. - - - - - Callbacks - - Callbacks may also be registered - for events such as regulation failures. - - - - - - Regulator driver interface - - Drivers for regulator chips register the regulators - with the regulator core, providing operations structures to the - core. A notifier interface - allows error conditions to be reported to the core. - - - Registration should be triggered by explicit setup done by the - platform, supplying a struct - regulator_init_data for the regulator containing - constraint and - supply information. - - - - - Machine interface - - This interface provides a way to define how regulators are - connected to consumers on a given system and what the valid - operating parameters are for the system. - - - - Supplies - - Regulator supplies are specified using struct - regulator_consumer_supply. This is done at - driver registration - time as part of the machine constraints. - - - - - Constraints - - As well as definining the connections the machine interface - also provides constraints definining the operations that - clients are allowed to perform and the parameters that may be - set. This is required since generally regulator devices will - offer more flexibility than it is safe to use on a given - system, for example supporting higher supply voltages than the - consumers are rated for. - - - This is done at driver - registration time by providing a struct - regulation_constraints. - - - The constraints may also specify an initial configuration for the - regulator in the constraints, which is particularly useful for - use with static consumers. - - - - - - API reference - - Due to limitations of the kernel documentation framework and the - existing layout of the source code the entire regulator API is - documented here. - -!Iinclude/linux/regulator/consumer.h -!Iinclude/linux/regulator/machine.h -!Iinclude/linux/regulator/driver.h -!Edrivers/regulator/core.c - - diff --git a/trunk/Documentation/DocBook/uio-howto.tmpl b/trunk/Documentation/DocBook/uio-howto.tmpl index 52e1b79ce0e6..df87d1b93605 100644 --- a/trunk/Documentation/DocBook/uio-howto.tmpl +++ b/trunk/Documentation/DocBook/uio-howto.tmpl @@ -41,18 +41,6 @@ GPL version 2. - - 0.7 - 2008-12-23 - hjk - Added generic platform drivers and offset attribute. - - - 0.6 - 2008-12-05 - hjk - Added description of portio sysfs attributes. - 0.5 2008-05-22 @@ -318,16 +306,6 @@ interested in translating it, please email me pointed to by addr. - - - offset: The offset, in bytes, that has to be - added to the pointer returned by mmap() to get - to the actual device memory. This is important if the device's memory - is not page aligned. Remember that pointers returned by - mmap() are always page aligned, so it is good - style to always add this offset. - - @@ -340,54 +318,6 @@ interested in translating it, please email me offset = N * getpagesize(); - - Sometimes there is hardware with memory-like regions that can not be - mapped with the technique described here, but there are still ways to - access them from userspace. The most common example are x86 ioports. - On x86 systems, userspace can access these ioports using - ioperm(), iopl(), - inb(), outb(), and similar - functions. - - - Since these ioport regions can not be mapped, they will not appear under - /sys/class/uio/uioX/maps/ like the normal memory - described above. Without information about the port regions a hardware - has to offer, it becomes difficult for the userspace part of the - driver to find out which ports belong to which UIO device. - - - To address this situation, the new directory - /sys/class/uio/uioX/portio/ was added. It only - exists if the driver wants to pass information about one or more port - regions to userspace. If that is the case, subdirectories named - port0, port1, and so on, - will appear underneath - /sys/class/uio/uioX/portio/. - - - Each portX/ directory contains three read-only - files that show start, size, and type of the port region: - - - - - start: The first port of this region. - - - - - size: The number of ports in this region. - - - - - porttype: A string describing the type of port. - - - - - @@ -409,12 +339,12 @@ offset = N * getpagesize(); -const char *name: Required. The name of your driver as +char *name: Required. The name of your driver as it will appear in sysfs. I recommend using the name of your module for this. -const char *version: Required. This string appears in +char *version: Required. This string appears in /sys/class/uio/uioX/version. @@ -425,13 +355,6 @@ mapping you need to fill one of the uio_mem structures. See the description below for details. - -struct uio_port port[ MAX_UIO_PORTS_REGIONS ]: Required -if you want to pass information about ioports to userspace. For each port -region you need to fill one of the uio_port structures. -See the description below for details. - - long irq: Required. If your hardware generates an interrupt, it's your modules task to determine the irq number during @@ -525,42 +448,6 @@ Please do not touch the kobj element of struct uio_mem! It is used by the UIO framework to set up sysfs files for this mapping. Simply leave it alone. - - -Sometimes, your device can have one or more port regions which can not be -mapped to userspace. But if there are other possibilities for userspace to -access these ports, it makes sense to make information about the ports -available in sysfs. For each region, you have to set up a -struct uio_port in the port[] array. -Here's a description of the fields of struct uio_port: - - - - -char *porttype: Required. Set this to one of the predefined -constants. Use UIO_PORT_X86 for the ioports found in x86 -architectures. - - - -unsigned long start: Required if the port region is used. -Fill in the number of the first port of this region. - - - -unsigned long size: Fill in the number of ports in this -region. If size is zero, the region is considered unused. -Note that you must initialize size -with zero for all unused regions. - - - - -Please do not touch the portio element of -struct uio_port! It is used internally by the UIO -framework to set up sysfs files for this region. Simply leave it alone. - - @@ -610,78 +497,6 @@ framework to set up sysfs files for this region. Simply leave it alone. - -Using uio_pdrv for platform devices - - In many cases, UIO drivers for platform devices can be handled in a - generic way. In the same place where you define your - struct platform_device, you simply also implement - your interrupt handler and fill your - struct uio_info. A pointer to this - struct uio_info is then used as - platform_data for your platform device. - - - You also need to set up an array of struct resource - containing addresses and sizes of your memory mappings. This - information is passed to the driver using the - .resource and .num_resources - elements of struct platform_device. - - - You now have to set the .name element of - struct platform_device to - "uio_pdrv" to use the generic UIO platform device - driver. This driver will fill the mem[] array - according to the resources given, and register the device. - - - The advantage of this approach is that you only have to edit a file - you need to edit anyway. You do not have to create an extra driver. - - - - -Using uio_pdrv_genirq for platform devices - - Especially in embedded devices, you frequently find chips where the - irq pin is tied to its own dedicated interrupt line. In such cases, - where you can be really sure the interrupt is not shared, we can take - the concept of uio_pdrv one step further and use a - generic interrupt handler. That's what - uio_pdrv_genirq does. - - - The setup for this driver is the same as described above for - uio_pdrv, except that you do not implement an - interrupt handler. The .handler element of - struct uio_info must remain - NULL. The .irq_flags element - must not contain IRQF_SHARED. - - - You will set the .name element of - struct platform_device to - "uio_pdrv_genirq" to use this driver. - - - The generic interrupt handler of uio_pdrv_genirq - will simply disable the interrupt line using - disable_irq_nosync(). After doing its work, - userspace can reenable the interrupt by writing 0x00000001 to the UIO - device file. The driver already implements an - irq_control() to make this possible, you must not - implement your own. - - - Using uio_pdrv_genirq not only saves a few lines of - interrupt handler code. You also do not need to know anything about - the chip's internal registers to create the kernel part of the driver. - All you need to know is the irq number of the pin the chip is - connected to. - - - diff --git a/trunk/Documentation/IO-mapping.txt b/trunk/Documentation/IO-mapping.txt index 78a440695e11..86edb61bdee6 100644 --- a/trunk/Documentation/IO-mapping.txt +++ b/trunk/Documentation/IO-mapping.txt @@ -1,6 +1,6 @@ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been - superseded by the functionality provided by the PCI DMA interface - (see Documentation/PCI/PCI-DMA-mapping.txt). They continue + superseded by the functionality provided by the PCI DMA + interface (see Documentation/DMA-mapping.txt). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 ] diff --git a/trunk/Documentation/PCI/pci.txt b/trunk/Documentation/PCI/pci.txt index 7f6de6ea5b47..fd4907a2968c 100644 --- a/trunk/Documentation/PCI/pci.txt +++ b/trunk/Documentation/PCI/pci.txt @@ -294,8 +294,7 @@ NOTE: pci_enable_device() can fail! Check the return value. pci_set_master() will enable DMA by setting the bus master bit in the PCI_COMMAND register. It also fixes the latency timer value if -it's set to something bogus by the BIOS. pci_clear_master() will -disable DMA by clearing the bus master bit. +it's set to something bogus by the BIOS. If the PCI device can use the PCI Memory-Write-Invalidate transaction, call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval diff --git a/trunk/Documentation/RCU/00-INDEX b/trunk/Documentation/RCU/00-INDEX index 9bb62f7b89c3..7dc0695a8f90 100644 --- a/trunk/Documentation/RCU/00-INDEX +++ b/trunk/Documentation/RCU/00-INDEX @@ -12,8 +12,6 @@ rcuref.txt - Reference-count design for elements of lists/arrays protected by RCU rcu.txt - RCU Concepts -rcubarrier.txt - - Unloading modules that use RCU callbacks RTFP.txt - List of RCU papers (bibliography) going back to 1980. torture.txt diff --git a/trunk/Documentation/RCU/rcubarrier.txt b/trunk/Documentation/RCU/rcubarrier.txt deleted file mode 100644 index 909602d409bb..000000000000 --- a/trunk/Documentation/RCU/rcubarrier.txt +++ /dev/null @@ -1,304 +0,0 @@ -RCU and Unloadable Modules - -[Originally published in LWN Jan. 14, 2007: http://lwn.net/Articles/217484/] - -RCU (read-copy update) is a synchronization mechanism that can be thought -of as a replacement for read-writer locking (among other things), but with -very low-overhead readers that are immune to deadlock, priority inversion, -and unbounded latency. RCU read-side critical sections are delimited -by rcu_read_lock() and rcu_read_unlock(), which, in non-CONFIG_PREEMPT -kernels, generate no code whatsoever. - -This means that RCU writers are unaware of the presence of concurrent -readers, so that RCU updates to shared data must be undertaken quite -carefully, leaving an old version of the data structure in place until all -pre-existing readers have finished. These old versions are needed because -such readers might hold a reference to them. RCU updates can therefore be -rather expensive, and RCU is thus best suited for read-mostly situations. - -How can an RCU writer possibly determine when all readers are finished, -given that readers might well leave absolutely no trace of their -presence? There is a synchronize_rcu() primitive that blocks until all -pre-existing readers have completed. An updater wishing to delete an -element p from a linked list might do the following, while holding an -appropriate lock, of course: - - list_del_rcu(p); - synchronize_rcu(); - kfree(p); - -But the above code cannot be used in IRQ context -- the call_rcu() -primitive must be used instead. This primitive takes a pointer to an -rcu_head struct placed within the RCU-protected data structure and -another pointer to a function that may be invoked later to free that -structure. Code to delete an element p from the linked list from IRQ -context might then be as follows: - - list_del_rcu(p); - call_rcu(&p->rcu, p_callback); - -Since call_rcu() never blocks, this code can safely be used from within -IRQ context. The function p_callback() might be defined as follows: - - static void p_callback(struct rcu_head *rp) - { - struct pstruct *p = container_of(rp, struct pstruct, rcu); - - kfree(p); - } - - -Unloading Modules That Use call_rcu() - -But what if p_callback is defined in an unloadable module? - -If we unload the module while some RCU callbacks are pending, -the CPUs executing these callbacks are going to be severely -disappointed when they are later invoked, as fancifully depicted at -http://lwn.net/images/ns/kernel/rcu-drop.jpg. - -We could try placing a synchronize_rcu() in the module-exit code path, -but this is not sufficient. Although synchronize_rcu() does wait for a -grace period to elapse, it does not wait for the callbacks to complete. - -One might be tempted to try several back-to-back synchronize_rcu() -calls, but this is still not guaranteed to work. If there is a very -heavy RCU-callback load, then some of the callbacks might be deferred -in order to allow other processing to proceed. Such deferral is required -in realtime kernels in order to avoid excessive scheduling latencies. - - -rcu_barrier() - -We instead need the rcu_barrier() primitive. This primitive is similar -to synchronize_rcu(), but instead of waiting solely for a grace -period to elapse, it also waits for all outstanding RCU callbacks to -complete. Pseudo-code using rcu_barrier() is as follows: - - 1. Prevent any new RCU callbacks from being posted. - 2. Execute rcu_barrier(). - 3. Allow the module to be unloaded. - -Quick Quiz #1: Why is there no srcu_barrier()? - -The rcutorture module makes use of rcu_barrier in its exit function -as follows: - - 1 static void - 2 rcu_torture_cleanup(void) - 3 { - 4 int i; - 5 - 6 fullstop = 1; - 7 if (shuffler_task != NULL) { - 8 VERBOSE_PRINTK_STRING("Stopping rcu_torture_shuffle task"); - 9 kthread_stop(shuffler_task); -10 } -11 shuffler_task = NULL; -12 -13 if (writer_task != NULL) { -14 VERBOSE_PRINTK_STRING("Stopping rcu_torture_writer task"); -15 kthread_stop(writer_task); -16 } -17 writer_task = NULL; -18 -19 if (reader_tasks != NULL) { -20 for (i = 0; i < nrealreaders; i++) { -21 if (reader_tasks[i] != NULL) { -22 VERBOSE_PRINTK_STRING( -23 "Stopping rcu_torture_reader task"); -24 kthread_stop(reader_tasks[i]); -25 } -26 reader_tasks[i] = NULL; -27 } -28 kfree(reader_tasks); -29 reader_tasks = NULL; -30 } -31 rcu_torture_current = NULL; -32 -33 if (fakewriter_tasks != NULL) { -34 for (i = 0; i < nfakewriters; i++) { -35 if (fakewriter_tasks[i] != NULL) { -36 VERBOSE_PRINTK_STRING( -37 "Stopping rcu_torture_fakewriter task"); -38 kthread_stop(fakewriter_tasks[i]); -39 } -40 fakewriter_tasks[i] = NULL; -41 } -42 kfree(fakewriter_tasks); -43 fakewriter_tasks = NULL; -44 } -45 -46 if (stats_task != NULL) { -47 VERBOSE_PRINTK_STRING("Stopping rcu_torture_stats task"); -48 kthread_stop(stats_task); -49 } -50 stats_task = NULL; -51 -52 /* Wait for all RCU callbacks to fire. */ -53 rcu_barrier(); -54 -55 rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ -56 -57 if (cur_ops->cleanup != NULL) -58 cur_ops->cleanup(); -59 if (atomic_read(&n_rcu_torture_error)) -60 rcu_torture_print_module_parms("End of test: FAILURE"); -61 else -62 rcu_torture_print_module_parms("End of test: SUCCESS"); -63 } - -Line 6 sets a global variable that prevents any RCU callbacks from -re-posting themselves. This will not be necessary in most cases, since -RCU callbacks rarely include calls to call_rcu(). However, the rcutorture -module is an exception to this rule, and therefore needs to set this -global variable. - -Lines 7-50 stop all the kernel tasks associated with the rcutorture -module. Therefore, once execution reaches line 53, no more rcutorture -RCU callbacks will be posted. The rcu_barrier() call on line 53 waits -for any pre-existing callbacks to complete. - -Then lines 55-62 print status and do operation-specific cleanup, and -then return, permitting the module-unload operation to be completed. - -Quick Quiz #2: Is there any other situation where rcu_barrier() might - be required? - -Your module might have additional complications. For example, if your -module invokes call_rcu() from timers, you will need to first cancel all -the timers, and only then invoke rcu_barrier() to wait for any remaining -RCU callbacks to complete. - - -Implementing rcu_barrier() - -Dipankar Sarma's implementation of rcu_barrier() makes use of the fact -that RCU callbacks are never reordered once queued on one of the per-CPU -queues. His implementation queues an RCU callback on each of the per-CPU -callback queues, and then waits until they have all started executing, at -which point, all earlier RCU callbacks are guaranteed to have completed. - -The original code for rcu_barrier() was as follows: - - 1 void rcu_barrier(void) - 2 { - 3 BUG_ON(in_interrupt()); - 4 /* Take cpucontrol mutex to protect against CPU hotplug */ - 5 mutex_lock(&rcu_barrier_mutex); - 6 init_completion(&rcu_barrier_completion); - 7 atomic_set(&rcu_barrier_cpu_count, 0); - 8 on_each_cpu(rcu_barrier_func, NULL, 0, 1); - 9 wait_for_completion(&rcu_barrier_completion); -10 mutex_unlock(&rcu_barrier_mutex); -11 } - -Line 3 verifies that the caller is in process context, and lines 5 and 10 -use rcu_barrier_mutex to ensure that only one rcu_barrier() is using the -global completion and counters at a time, which are initialized on lines -6 and 7. Line 8 causes each CPU to invoke rcu_barrier_func(), which is -shown below. Note that the final "1" in on_each_cpu()'s argument list -ensures that all the calls to rcu_barrier_func() will have completed -before on_each_cpu() returns. Line 9 then waits for the completion. - -This code was rewritten in 2008 to support rcu_barrier_bh() and -rcu_barrier_sched() in addition to the original rcu_barrier(). - -The rcu_barrier_func() runs on each CPU, where it invokes call_rcu() -to post an RCU callback, as follows: - - 1 static void rcu_barrier_func(void *notused) - 2 { - 3 int cpu = smp_processor_id(); - 4 struct rcu_data *rdp = &per_cpu(rcu_data, cpu); - 5 struct rcu_head *head; - 6 - 7 head = &rdp->barrier; - 8 atomic_inc(&rcu_barrier_cpu_count); - 9 call_rcu(head, rcu_barrier_callback); -10 } - -Lines 3 and 4 locate RCU's internal per-CPU rcu_data structure, -which contains the struct rcu_head that needed for the later call to -call_rcu(). Line 7 picks up a pointer to this struct rcu_head, and line -8 increments a global counter. This counter will later be decremented -by the callback. Line 9 then registers the rcu_barrier_callback() on -the current CPU's queue. - -The rcu_barrier_callback() function simply atomically decrements the -rcu_barrier_cpu_count variable and finalizes the completion when it -reaches zero, as follows: - - 1 static void rcu_barrier_callback(struct rcu_head *notused) - 2 { - 3 if (atomic_dec_and_test(&rcu_barrier_cpu_count)) - 4 complete(&rcu_barrier_completion); - 5 } - -Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes - immediately (thus incrementing rcu_barrier_cpu_count to the - value one), but the other CPU's rcu_barrier_func() invocations - are delayed for a full grace period? Couldn't this result in - rcu_barrier() returning prematurely? - - -rcu_barrier() Summary - -The rcu_barrier() primitive has seen relatively little use, since most -code using RCU is in the core kernel rather than in modules. However, if -you are using RCU from an unloadable module, you need to use rcu_barrier() -so that your module may be safely unloaded. - - -Answers to Quick Quizzes - -Quick Quiz #1: Why is there no srcu_barrier()? - -Answer: Since there is no call_srcu(), there can be no outstanding SRCU - callbacks. Therefore, there is no need to wait for them. - -Quick Quiz #2: Is there any other situation where rcu_barrier() might - be required? - -Answer: Interestingly enough, rcu_barrier() was not originally - implemented for module unloading. Nikita Danilov was using - RCU in a filesystem, which resulted in a similar situation at - filesystem-unmount time. Dipankar Sarma coded up rcu_barrier() - in response, so that Nikita could invoke it during the - filesystem-unmount process. - - Much later, yours truly hit the RCU module-unload problem when - implementing rcutorture, and found that rcu_barrier() solves - this problem as well. - -Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes - immediately (thus incrementing rcu_barrier_cpu_count to the - value one), but the other CPU's rcu_barrier_func() invocations - are delayed for a full grace period? Couldn't this result in - rcu_barrier() returning prematurely? - -Answer: This cannot happen. The reason is that on_each_cpu() has its last - argument, the wait flag, set to "1". This flag is passed through - to smp_call_function() and further to smp_call_function_on_cpu(), - causing this latter to spin until the cross-CPU invocation of - rcu_barrier_func() has completed. This by itself would prevent - a grace period from completing on non-CONFIG_PREEMPT kernels, - since each CPU must undergo a context switch (or other quiescent - state) before the grace period can complete. However, this is - of no use in CONFIG_PREEMPT kernels. - - Therefore, on_each_cpu() disables preemption across its call - to smp_call_function() and also across the local call to - rcu_barrier_func(). This prevents the local CPU from context - switching, again preventing grace periods from completing. This - means that all CPUs have executed rcu_barrier_func() before - the first rcu_barrier_callback() can possibly execute, in turn - preventing rcu_barrier_cpu_count from prematurely reaching zero. - - Currently, -rt implementations of RCU keep but a single global - queue for RCU callbacks, and thus do not suffer from this - problem. However, when the -rt RCU eventually does have per-CPU - callback queues, things will have to change. One simple change - is to add an rcu_read_lock() before line 8 of rcu_barrier() - and an rcu_read_unlock() after line 8 of this same function. If - you can think of a better change, please let me know! diff --git a/trunk/Documentation/accounting/getdelays.c b/trunk/Documentation/accounting/getdelays.c index 7ea231172c85..cc49400b4af8 100644 --- a/trunk/Documentation/accounting/getdelays.c +++ b/trunk/Documentation/accounting/getdelays.c @@ -392,10 +392,6 @@ int main(int argc, char *argv[]) goto err; } } - if (!maskset && !tid && !containerset) { - usage(); - goto err; - } do { int i; diff --git a/trunk/Documentation/bad_memory.txt b/trunk/Documentation/bad_memory.txt deleted file mode 100644 index df8416213202..000000000000 --- a/trunk/Documentation/bad_memory.txt +++ /dev/null @@ -1,45 +0,0 @@ -March 2008 -Jan-Simon Moeller, dl9pf@gmx.de - - -How to deal with bad memory e.g. reported by memtest86+ ? -######################################################### - -There are three possibilities I know of: - -1) Reinsert/swap the memory modules - -2) Buy new modules (best!) or try to exchange the memory - if you have spare-parts - -3) Use BadRAM or memmap - -This Howto is about number 3) . - - -BadRAM -###### -BadRAM is the actively developed and available as kernel-patch -here: http://rick.vanrein.org/linux/badram/ - -For more details see the BadRAM documentation. - -memmap -###### - -memmap is already in the kernel and usable as kernel-parameter at -boot-time. Its syntax is slightly strange and you may need to -calculate the values by yourself! - -Syntax to exclude a memory area (see kernel-parameters.txt for details): -memmap=$
- -Example: memtest86+ reported here errors at address 0x18691458, 0x18698424 and - some others. All had 0x1869xxxx in common, so I chose a pattern of - 0x18690000,0xffff0000. - -With the numbers of the example above: -memmap=64K$0x18690000 - or -memmap=0x10000$0x18690000 - diff --git a/trunk/Documentation/blackfin/00-INDEX b/trunk/Documentation/blackfin/00-INDEX index d6840a91e1e1..7cb3b356b249 100644 --- a/trunk/Documentation/blackfin/00-INDEX +++ b/trunk/Documentation/blackfin/00-INDEX @@ -9,6 +9,3 @@ cachefeatures.txt Filesystems - Requirements for mounting the root file system. - -bfin-gpio-note.txt - - Notes in developing/using bfin-gpio driver. diff --git a/trunk/Documentation/blackfin/bfin-gpio-notes.txt b/trunk/Documentation/blackfin/bfin-gpio-notes.txt deleted file mode 100644 index 9898c7ded7d3..000000000000 --- a/trunk/Documentation/blackfin/bfin-gpio-notes.txt +++ /dev/null @@ -1,71 +0,0 @@ -/* - * File: Documentation/blackfin/bfin-gpio-note.txt - * Based on: - * Author: - * - * Created: $Id: bfin-gpio-note.txt 2008-11-24 16:42 grafyang $ - * Description: This file contains the notes in developing/using bfin-gpio. - * - * - * Rev: - * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - */ - - -1. Blackfin GPIO introduction - - There are many GPIO pins on Blackfin. Most of these pins are muxed to - multi-functions. They can be configured as peripheral, or just as GPIO, - configured to input with interrupt enabled, or output. - - For detailed information, please see "arch/blackfin/kernel/bfin_gpio.c", - or the relevant HRM. - - -2. Avoiding resource conflict - - Followed function groups are used to avoiding resource conflict, - - Use the pin as peripheral, - int peripheral_request(unsigned short per, const char *label); - int peripheral_request_list(const unsigned short per[], const char *label); - void peripheral_free(unsigned short per); - void peripheral_free_list(const unsigned short per[]); - - Use the pin as GPIO, - int bfin_gpio_request(unsigned gpio, const char *label); - void bfin_gpio_free(unsigned gpio); - - Use the pin as GPIO interrupt, - int bfin_gpio_irq_request(unsigned gpio, const char *label); - void bfin_gpio_irq_free(unsigned gpio); - - The request functions will record the function state for a certain pin, - the free functions will clear it's function state. - Once a pin is requested, it can't be requested again before it is freed by - previous caller, otherwise kernel will dump stacks, and the request - function fail. - These functions are wrapped by other functions, most of the users need not - care. - - -3. But there are some exceptions - - Kernel permit the identical GPIO be requested both as GPIO and GPIO - interrut. - Some drivers, like gpio-keys, need this behavior. Kernel only print out - warning messages like, - bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are -configuring it as IRQ! - - Note: Consider the case that, if there are two drivers need the - identical GPIO, one of them use it as GPIO, the other use it as - GPIO interrupt. This will really cause resource conflict. So if - there is any abnormal driver behavior, please check the bfin-gpio - warning messages. - - - Kernel permit the identical GPIO be requested from the same driver twice. - - - diff --git a/trunk/Documentation/block/biodoc.txt b/trunk/Documentation/block/biodoc.txt index ecad6ee75705..3c5434c83daf 100644 --- a/trunk/Documentation/block/biodoc.txt +++ b/trunk/Documentation/block/biodoc.txt @@ -186,9 +186,8 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion -on PCI high mem DMA aspects and mapping of scatter gather lists, and support -for 64 bit PCI. +Note: Please refer to DMA-mapping.txt for a discussion on PCI high mem DMA +aspects and mapping of scatter gather lists, and support for 64 bit PCI. Special handling is required only for cases where i/o needs to happen on pages at physical memory addresses beyond what the device can support. In these @@ -954,14 +953,14 @@ elevator_allow_merge_fn called whenever the block layer determines results in some sort of conflict internally, this hook allows it to do that. -elevator_dispatch_fn* fills the dispatch queue with ready requests. +elevator_dispatch_fn fills the dispatch queue with ready requests. I/O schedulers are free to postpone requests by not filling the dispatch queue unless @force is non-zero. Once dispatched, I/O schedulers are not allowed to manipulate the requests - they belong to generic dispatch queue. -elevator_add_req_fn* called to add a new request into the scheduler +elevator_add_req_fn called to add a new request into the scheduler elevator_queue_empty_fn returns true if the merge queue is empty. Drivers shouldn't use this, but rather check @@ -991,7 +990,7 @@ elevator_activate_req_fn Called when device driver first sees a request. elevator_deactivate_req_fn Called when device driver decides to delay a request by requeueing it. -elevator_init_fn* +elevator_init_fn elevator_exit_fn Allocate and free any elevator specific storage for a queue. diff --git a/trunk/Documentation/block/queue-sysfs.txt b/trunk/Documentation/block/queue-sysfs.txt deleted file mode 100644 index e164403f60e1..000000000000 --- a/trunk/Documentation/block/queue-sysfs.txt +++ /dev/null @@ -1,63 +0,0 @@ -Queue sysfs files -================= - -This text file will detail the queue files that are located in the sysfs tree -for each block device. Note that stacked devices typically do not export -any settings, since their queue merely functions are a remapping target. -These files are the ones found in the /sys/block/xxx/queue/ directory. - -Files denoted with a RO postfix are readonly and the RW postfix means -read-write. - -hw_sector_size (RO) -------------------- -This is the hardware sector size of the device, in bytes. - -max_hw_sectors_kb (RO) ----------------------- -This is the maximum number of kilobytes supported in a single data transfer. - -max_sectors_kb (RW) -------------------- -This is the maximum number of kilobytes that the block layer will allow -for a filesystem request. Must be smaller than or equal to the maximum -size allowed by the hardware. - -nomerges (RW) -------------- -This enables the user to disable the lookup logic involved with IO merging -requests in the block layer. Merging may still occur through a direct -1-hit cache, since that comes for (almost) free. The IO scheduler will not -waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults -to 0, enabling all merges. - -nr_requests (RW) ----------------- -This controls how many requests may be allocated in the block layer for -read or write requests. Note that the total allocated number may be twice -this amount, since it applies only to reads or writes (not the accumulated -sum). - -read_ahead_kb (RW) ------------------- -Maximum number of kilobytes to read-ahead for filesystems on this block -device. - -rq_affinity (RW) ----------------- -If this option is enabled, the block layer will migrate request completions -to the CPU that originally submitted the request. For some workloads -this provides a significant reduction in CPU cycles due to caching effects. - -scheduler (RW) --------------- -When read, this file will display the current and available IO schedulers -for this block device. The currently active IO scheduler will be enclosed -in [] brackets. Writing an IO scheduler name to this file will switch -control of this block device to that new IO scheduler. Note that writing -an IO scheduler name to this file will attempt to load that IO scheduler -module, if it isn't already present in the system. - - - -Jens Axboe , February 2009 diff --git a/trunk/Documentation/cgroups/cgroups.txt b/trunk/Documentation/cgroups/cgroups.txt index d9e5d6f41b92..d9014aa0eb68 100644 --- a/trunk/Documentation/cgroups/cgroups.txt +++ b/trunk/Documentation/cgroups/cgroups.txt @@ -1,8 +1,7 @@ CGROUPS ------- -Written by Paul Menage based on -Documentation/cgroups/cpusets.txt +Written by Paul Menage based on Documentation/cpusets.txt Original copyright statements from cpusets.txt: Portions Copyright (C) 2004 BULL SA. @@ -69,7 +68,7 @@ On their own, the only use for cgroups is for simple job tracking. The intention is that other subsystems hook into the generic cgroup support to provide new attributes for cgroups, such as accounting/limiting the resources which processes in a cgroup can -access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allows +access. For example, cpusets (see Documentation/cpusets.txt) allows you to associate a set of CPUs and a set of memory nodes with the tasks in each cgroup. @@ -228,6 +227,7 @@ Each cgroup is represented by a directory in the cgroup file system containing the following files describing that cgroup: - tasks: list of tasks (by pid) attached to that cgroup + - releasable flag: cgroup currently removeable? - notify_on_release flag: run the release agent on exit? - release_agent: the path to use for release notifications (this file exists in the top cgroup only) @@ -360,7 +360,7 @@ Now you want to do something with this cgroup. In this directory you can find several files: # ls -notify_on_release tasks +notify_on_release releasable tasks (plus whatever files added by the attached subsystems) Now attach your shell to this cgroup: @@ -479,6 +479,7 @@ newly-created cgroup if an error occurs after this subsystem's create() method has been called for the new cgroup). void pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp); +(cgroup_mutex held by caller) Called before checking the reference count on each subsystem. This may be useful for subsystems which have some extra references even if @@ -497,7 +498,6 @@ remain valid while the caller holds cgroup_mutex. void attach(struct cgroup_subsys *ss, struct cgroup *cgrp, struct cgroup *old_cgrp, struct task_struct *task) -(cgroup_mutex held by caller) Called after the task has been attached to the cgroup, to allow any post-attachment activity that requires memory allocations or blocking. @@ -511,7 +511,6 @@ void exit(struct cgroup_subsys *ss, struct task_struct *task) Called during task exit. int populate(struct cgroup_subsys *ss, struct cgroup *cgrp) -(cgroup_mutex held by caller) Called after creation of a cgroup to allow a subsystem to populate the cgroup directory with file entries. The subsystem should make @@ -521,7 +520,6 @@ method can return an error code, the error code is currently not always handled well. void post_clone(struct cgroup_subsys *ss, struct cgroup *cgrp) -(cgroup_mutex held by caller) Called at the end of cgroup_clone() to do any paramater initialization which might be required before a task could attach. For @@ -529,7 +527,7 @@ example in cpusets, no task may attach before 'cpus' and 'mems' are set up. void bind(struct cgroup_subsys *ss, struct cgroup *root) -(cgroup_mutex and ss->hierarchy_mutex held by caller) +(cgroup_mutex held by caller) Called when a cgroup subsystem is rebound to a different hierarchy and root cgroup. Currently this will only involve movement between diff --git a/trunk/Documentation/cgroups/memcg_test.txt b/trunk/Documentation/cgroups/memcg_test.txt deleted file mode 100644 index 523a9c16c400..000000000000 --- a/trunk/Documentation/cgroups/memcg_test.txt +++ /dev/null @@ -1,362 +0,0 @@ -Memory Resource Controller(Memcg) Implementation Memo. -Last Updated: 2009/1/19 -Base Kernel Version: based on 2.6.29-rc2. - -Because VM is getting complex (one of reasons is memcg...), memcg's behavior -is complex. This is a document for memcg's internal behavior. -Please note that implementation details can be changed. - -(*) Topics on API should be in Documentation/cgroups/memory.txt) - -0. How to record usage ? - 2 objects are used. - - page_cgroup ....an object per page. - Allocated at boot or memory hotplug. Freed at memory hot removal. - - swap_cgroup ... an entry per swp_entry. - Allocated at swapon(). Freed at swapoff(). - - The page_cgroup has USED bit and double count against a page_cgroup never - occurs. swap_cgroup is used only when a charged page is swapped-out. - -1. Charge - - a page/swp_entry may be charged (usage += PAGE_SIZE) at - - mem_cgroup_newpage_charge() - Called at new page fault and Copy-On-Write. - - mem_cgroup_try_charge_swapin() - Called at do_swap_page() (page fault on swap entry) and swapoff. - Followed by charge-commit-cancel protocol. (With swap accounting) - At commit, a charge recorded in swap_cgroup is removed. - - mem_cgroup_cache_charge() - Called at add_to_page_cache() - - mem_cgroup_cache_charge_swapin() - Called at shmem's swapin. - - mem_cgroup_prepare_migration() - Called before migration. "extra" charge is done and followed by - charge-commit-cancel protocol. - At commit, charge against oldpage or newpage will be committed. - -2. Uncharge - a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by - - mem_cgroup_uncharge_page() - Called when an anonymous page is fully unmapped. I.e., mapcount goes - to 0. If the page is SwapCache, uncharge is delayed until - mem_cgroup_uncharge_swapcache(). - - mem_cgroup_uncharge_cache_page() - Called when a page-cache is deleted from radix-tree. If the page is - SwapCache, uncharge is delayed until mem_cgroup_uncharge_swapcache(). - - mem_cgroup_uncharge_swapcache() - Called when SwapCache is removed from radix-tree. The charge itself - is moved to swap_cgroup. (If mem+swap controller is disabled, no - charge to swap occurs.) - - mem_cgroup_uncharge_swap() - Called when swp_entry's refcnt goes down to 0. A charge against swap - disappears. - - mem_cgroup_end_migration(old, new) - At success of migration old is uncharged (if necessary), a charge - to new page is committed. At failure, charge to old page is committed. - -3. charge-commit-cancel - In some case, we can't know this "charge" is valid or not at charging - (because of races). - To handle such case, there are charge-commit-cancel functions. - mem_cgroup_try_charge_XXX - mem_cgroup_commit_charge_XXX - mem_cgroup_cancel_charge_XXX - these are used in swap-in and migration. - - At try_charge(), there are no flags to say "this page is charged". - at this point, usage += PAGE_SIZE. - - At commit(), the function checks the page should be charged or not - and set flags or avoid charging.(usage -= PAGE_SIZE) - - At cancel(), simply usage -= PAGE_SIZE. - -Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. - -4. Anonymous - Anonymous page is newly allocated at - - page fault into MAP_ANONYMOUS mapping. - - Copy-On-Write. - It is charged right after it's allocated before doing any page table - related operations. Of course, it's uncharged when another page is used - for the fault address. - - At freeing anonymous page (by exit() or munmap()), zap_pte() is called - and pages for ptes are freed one by one.(see mm/memory.c). Uncharges - are done at page_remove_rmap() when page_mapcount() goes down to 0. - - Another page freeing is by page-reclaim (vmscan.c) and anonymous - pages are swapped out. In this case, the page is marked as - PageSwapCache(). uncharge() routine doesn't uncharge the page marked - as SwapCache(). It's delayed until __delete_from_swap_cache(). - - 4.1 Swap-in. - At swap-in, the page is taken from swap-cache. There are 2 cases. - - (a) If the SwapCache is newly allocated and read, it has no charges. - (b) If the SwapCache has been mapped by processes, it has been - charged already. - - This swap-in is one of the most complicated work. In do_swap_page(), - following events occur when pte is unchanged. - - (1) the page (SwapCache) is looked up. - (2) lock_page() - (3) try_charge_swapin() - (4) reuse_swap_page() (may call delete_swap_cache()) - (5) commit_charge_swapin() - (6) swap_free(). - - Considering following situation for example. - - (A) The page has not been charged before (2) and reuse_swap_page() - doesn't call delete_from_swap_cache(). - (B) The page has not been charged before (2) and reuse_swap_page() - calls delete_from_swap_cache(). - (C) The page has been charged before (2) and reuse_swap_page() doesn't - call delete_from_swap_cache(). - (D) The page has been charged before (2) and reuse_swap_page() calls - delete_from_swap_cache(). - - memory.usage/memsw.usage changes to this page/swp_entry will be - Case (A) (B) (C) (D) - Event - Before (2) 0/ 1 0/ 1 1/ 1 1/ 1 - =========================================== - (3) +1/+1 +1/+1 +1/+1 +1/+1 - (4) - 0/ 0 - -1/ 0 - (5) 0/-1 0/ 0 -1/-1 0/ 0 - (6) - 0/-1 - 0/-1 - =========================================== - Result 1/ 1 1/ 1 1/ 1 1/ 1 - - In any cases, charges to this page should be 1/ 1. - - 4.2 Swap-out. - At swap-out, typical state transition is below. - - (a) add to swap cache. (marked as SwapCache) - swp_entry's refcnt += 1. - (b) fully unmapped. - swp_entry's refcnt += # of ptes. - (c) write back to swap. - (d) delete from swap cache. (remove from SwapCache) - swp_entry's refcnt -= 1. - - - At (b), the page is marked as SwapCache and not uncharged. - At (d), the page is removed from SwapCache and a charge in page_cgroup - is moved to swap_cgroup. - - Finally, at task exit, - (e) zap_pte() is called and swp_entry's refcnt -=1 -> 0. - Here, a charge in swap_cgroup disappears. - -5. Page Cache - Page Cache is charged at - - add_to_page_cache_locked(). - - uncharged at - - __remove_from_page_cache(). - - The logic is very clear. (About migration, see below) - Note: __remove_from_page_cache() is called by remove_from_page_cache() - and __remove_mapping(). - -6. Shmem(tmpfs) Page Cache - Memcg's charge/uncharge have special handlers of shmem. The best way - to understand shmem's page state transition is to read mm/shmem.c. - But brief explanation of the behavior of memcg around shmem will be - helpful to understand the logic. - - Shmem's page (just leaf page, not direct/indirect block) can be on - - radix-tree of shmem's inode. - - SwapCache. - - Both on radix-tree and SwapCache. This happens at swap-in - and swap-out, - - It's charged when... - - A new page is added to shmem's radix-tree. - - A swp page is read. (move a charge from swap_cgroup to page_cgroup) - It's uncharged when - - A page is removed from radix-tree and not SwapCache. - - When SwapCache is removed, a charge is moved to swap_cgroup. - - When swp_entry's refcnt goes down to 0, a charge in swap_cgroup - disappears. - -7. Page Migration - One of the most complicated functions is page-migration-handler. - Memcg has 2 routines. Assume that we are migrating a page's contents - from OLDPAGE to NEWPAGE. - - Usual migration logic is.. - (a) remove the page from LRU. - (b) allocate NEWPAGE (migration target) - (c) lock by lock_page(). - (d) unmap all mappings. - (e-1) If necessary, replace entry in radix-tree. - (e-2) move contents of a page. - (f) map all mappings again. - (g) pushback the page to LRU. - (-) OLDPAGE will be freed. - - Before (g), memcg should complete all necessary charge/uncharge to - NEWPAGE/OLDPAGE. - - The point is.... - - If OLDPAGE is anonymous, all charges will be dropped at (d) because - try_to_unmap() drops all mapcount and the page will not be - SwapCache. - - - If OLDPAGE is SwapCache, charges will be kept at (g) because - __delete_from_swap_cache() isn't called at (e-1) - - - If OLDPAGE is page-cache, charges will be kept at (g) because - remove_from_swap_cache() isn't called at (e-1) - - memcg provides following hooks. - - - mem_cgroup_prepare_migration(OLDPAGE) - Called after (b) to account a charge (usage += PAGE_SIZE) against - memcg which OLDPAGE belongs to. - - - mem_cgroup_end_migration(OLDPAGE, NEWPAGE) - Called after (f) before (g). - If OLDPAGE is used, commit OLDPAGE again. If OLDPAGE is already - charged, a charge by prepare_migration() is automatically canceled. - If NEWPAGE is used, commit NEWPAGE and uncharge OLDPAGE. - - But zap_pte() (by exit or munmap) can be called while migration, - we have to check if OLDPAGE/NEWPAGE is a valid page after commit(). - -8. LRU - Each memcg has its own private LRU. Now, it's handling is under global - VM's control (means that it's handled under global zone->lru_lock). - Almost all routines around memcg's LRU is called by global LRU's - list management functions under zone->lru_lock(). - - A special function is mem_cgroup_isolate_pages(). This scans - memcg's private LRU and call __isolate_lru_page() to extract a page - from LRU. - (By __isolate_lru_page(), the page is removed from both of global and - private LRU.) - - -9. Typical Tests. - - Tests for racy cases. - - 9.1 Small limit to memcg. - When you do test to do racy case, it's good test to set memcg's limit - to be very small rather than GB. Many races found in the test under - xKB or xxMB limits. - (Memory behavior under GB and Memory behavior under MB shows very - different situation.) - - 9.2 Shmem - Historically, memcg's shmem handling was poor and we saw some amount - of troubles here. This is because shmem is page-cache but can be - SwapCache. Test with shmem/tmpfs is always good test. - - 9.3 Migration - For NUMA, migration is an another special case. To do easy test, cpuset - is useful. Following is a sample script to do migration. - - mount -t cgroup -o cpuset none /opt/cpuset - - mkdir /opt/cpuset/01 - echo 1 > /opt/cpuset/01/cpuset.cpus - echo 0 > /opt/cpuset/01/cpuset.mems - echo 1 > /opt/cpuset/01/cpuset.memory_migrate - mkdir /opt/cpuset/02 - echo 1 > /opt/cpuset/02/cpuset.cpus - echo 1 > /opt/cpuset/02/cpuset.mems - echo 1 > /opt/cpuset/02/cpuset.memory_migrate - - In above set, when you moves a task from 01 to 02, page migration to - node 0 to node 1 will occur. Following is a script to migrate all - under cpuset. - -- - move_task() - { - for pid in $1 - do - /bin/echo $pid >$2/tasks 2>/dev/null - echo -n $pid - echo -n " " - done - echo END - } - - G1_TASK=`cat ${G1}/tasks` - G2_TASK=`cat ${G2}/tasks` - move_task "${G1_TASK}" ${G2} & - -- - 9.4 Memory hotplug. - memory hotplug test is one of good test. - to offline memory, do following. - # echo offline > /sys/devices/system/memory/memoryXXX/state - (XXX is the place of memory) - This is an easy way to test page migration, too. - - 9.5 mkdir/rmdir - When using hierarchy, mkdir/rmdir test should be done. - Use tests like the following. - - echo 1 >/opt/cgroup/01/memory/use_hierarchy - mkdir /opt/cgroup/01/child_a - mkdir /opt/cgroup/01/child_b - - set limit to 01. - add limit to 01/child_b - run jobs under child_a and child_b - - create/delete following groups at random while jobs are running. - /opt/cgroup/01/child_a/child_aa - /opt/cgroup/01/child_b/child_bb - /opt/cgroup/01/child_c - - running new jobs in new group is also good. - - 9.6 Mount with other subsystems. - Mounting with other subsystems is a good test because there is a - race and lock dependency with other cgroup subsystems. - - example) - # mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices - - and do task move, mkdir, rmdir etc...under this. - - 9.7 swapoff. - Besides management of swap is one of complicated parts of memcg, - call path of swap-in at swapoff is not same as usual swap-in path.. - It's worth to be tested explicitly. - - For example, test like following is good. - (Shell-A) - # mount -t cgroup none /cgroup -t memory - # mkdir /cgroup/test - # echo 40M > /cgroup/test/memory.limit_in_bytes - # echo 0 > /cgroup/test/tasks - Run malloc(100M) program under this. You'll see 60M of swaps. - (Shell-B) - # move all tasks in /cgroup/test to /cgroup - # /sbin/swapoff -a - # rmdir /test/cgroup - # kill malloc task. - - Of course, tmpfs v.s. swapoff test should be tested, too. diff --git a/trunk/Documentation/cgroups/memory.txt b/trunk/Documentation/cgroups/memory.txt deleted file mode 100644 index e1501964df1e..000000000000 --- a/trunk/Documentation/cgroups/memory.txt +++ /dev/null @@ -1,399 +0,0 @@ -Memory Resource Controller - -NOTE: The Memory Resource Controller has been generically been referred -to as the memory controller in this document. Do not confuse memory controller -used here with the memory controller that is used in hardware. - -Salient features - -a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages -b. The infrastructure allows easy addition of other types of memory to control -c. Provides *zero overhead* for non memory controller users -d. Provides a double LRU: global memory pressure causes reclaim from the - global LRU; a cgroup on hitting a limit, reclaims from the per - cgroup LRU - -NOTE: Swap Cache (unmapped) is not accounted now. - -Benefits and Purpose of the memory controller - -The memory controller isolates the memory behaviour of a group of tasks -from the rest of the system. The article on LWN [12] mentions some probable -uses of the memory controller. The memory controller can be used to - -a. Isolate an application or a group of applications - Memory hungry applications can be isolated and limited to a smaller - amount of memory. -b. Create a cgroup with limited amount of memory, this can be used - as a good alternative to booting with mem=XXXX. -c. Virtualization solutions can control the amount of memory they want - to assign to a virtual machine instance. -d. A CD/DVD burner could control the amount of memory used by the - rest of the system to ensure that burning does not fail due to lack - of available memory. -e. There are several other use cases, find one or use the controller just - for fun (to learn and hack on the VM subsystem). - -1. History - -The memory controller has a long history. A request for comments for the memory -controller was posted by Balbir Singh [1]. At the time the RFC was posted -there were several implementations for memory control. The goal of the -RFC was to build consensus and agreement for the minimal features required -for memory control. The first RSS controller was posted by Balbir Singh[2] -in Feb 2007. Pavel Emelianov [3][4][5] has since posted three versions of the -RSS controller. At OLS, at the resource management BoF, everyone suggested -that we handle both page cache and RSS together. Another request was raised -to allow user space handling of OOM. The current memory controller is -at version 6; it combines both mapped (RSS) and unmapped Page -Cache Control [11]. - -2. Memory Control - -Memory is a unique resource in the sense that it is present in a limited -amount. If a task requires a lot of CPU processing, the task can spread -its processing over a period of hours, days, months or years, but with -memory, the same physical memory needs to be reused to accomplish the task. - -The memory controller implementation has been divided into phases. These -are: - -1. Memory controller -2. mlock(2) controller -3. Kernel user memory accounting and slab control -4. user mappings length controller - -The memory controller is the first controller developed. - -2.1. Design - -The core of the design is a counter called the res_counter. The res_counter -tracks the current memory usage and limit of the group of processes associated -with the controller. Each cgroup has a memory controller specific data -structure (mem_cgroup) associated with it. - -2.2. Accounting - - +--------------------+ - | mem_cgroup | - | (res_counter) | - +--------------------+ - / ^ \ - / | \ - +---------------+ | +---------------+ - | mm_struct | |.... | mm_struct | - | | | | | - +---------------+ | +---------------+ - | - + --------------+ - | - +---------------+ +------+--------+ - | page +----------> page_cgroup| - | | | | - +---------------+ +---------------+ - - (Figure 1: Hierarchy of Accounting) - - -Figure 1 shows the important aspects of the controller - -1. Accounting happens per cgroup -2. Each mm_struct knows about which cgroup it belongs to -3. Each page has a pointer to the page_cgroup, which in turn knows the - cgroup it belongs to - -The accounting is done as follows: mem_cgroup_charge() is invoked to setup -the necessary data structures and check if the cgroup that is being charged -is over its limit. If it is then reclaim is invoked on the cgroup. -More details can be found in the reclaim section of this document. -If everything goes well, a page meta-data-structure called page_cgroup is -allocated and associated with the page. This routine also adds the page to -the per cgroup LRU. - -2.2.1 Accounting details - -All mapped anon pages (RSS) and cache pages (Page Cache) are accounted. -(some pages which never be reclaimable and will not be on global LRU - are not accounted. we just accounts pages under usual vm management.) - -RSS pages are accounted at page_fault unless they've already been accounted -for earlier. A file page will be accounted for as Page Cache when it's -inserted into inode (radix-tree). While it's mapped into the page tables of -processes, duplicate accounting is carefully avoided. - -A RSS page is unaccounted when it's fully unmapped. A PageCache page is -unaccounted when it's removed from radix-tree. - -At page migration, accounting information is kept. - -Note: we just account pages-on-lru because our purpose is to control amount -of used pages. not-on-lru pages are tend to be out-of-control from vm view. - -2.3 Shared Page Accounting - -Shared pages are accounted on the basis of the first touch approach. The -cgroup that first touches a page is accounted for the page. The principle -behind this approach is that a cgroup that aggressively uses a shared -page will eventually get charged for it (once it is uncharged from -the cgroup that brought it in -- this will happen on memory pressure). - -Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.. -When you do swapoff and make swapped-out pages of shmem(tmpfs) to -be backed into memory in force, charges for pages are accounted against the -caller of swapoff rather than the users of shmem. - - -2.4 Swap Extension (CONFIG_CGROUP_MEM_RES_CTLR_SWAP) -Swap Extension allows you to record charge for swap. A swapped-in page is -charged back to original page allocator if possible. - -When swap is accounted, following files are added. - - memory.memsw.usage_in_bytes. - - memory.memsw.limit_in_bytes. - -usage of mem+swap is limited by memsw.limit_in_bytes. - -Note: why 'mem+swap' rather than swap. -The global LRU(kswapd) can swap out arbitrary pages. Swap-out means -to move account from memory to swap...there is no change in usage of -mem+swap. - -In other words, when we want to limit the usage of swap without affecting -global LRU, mem+swap limit is better than just limiting swap from OS point -of view. - -2.5 Reclaim - -Each cgroup maintains a per cgroup LRU that consists of an active -and inactive list. When a cgroup goes over its limit, we first try -to reclaim memory from the cgroup so as to make space for the new -pages that the cgroup has touched. If the reclaim is unsuccessful, -an OOM routine is invoked to select and kill the bulkiest task in the -cgroup. - -The reclaim algorithm has not been modified for cgroups, except that -pages that are selected for reclaiming come from the per cgroup LRU -list. - -2. Locking - -The memory controller uses the following hierarchy - -1. zone->lru_lock is used for selecting pages to be isolated -2. mem->per_zone->lru_lock protects the per cgroup LRU (per zone) -3. lock_page_cgroup() is used to protect page->page_cgroup - -3. User Interface - -0. Configuration - -a. Enable CONFIG_CGROUPS -b. Enable CONFIG_RESOURCE_COUNTERS -c. Enable CONFIG_CGROUP_MEM_RES_CTLR - -1. Prepare the cgroups -# mkdir -p /cgroups -# mount -t cgroup none /cgroups -o memory - -2. Make the new group and move bash into it -# mkdir /cgroups/0 -# echo $$ > /cgroups/0/tasks - -Since now we're in the 0 cgroup, -We can alter the memory limit: -# echo 4M > /cgroups/0/memory.limit_in_bytes - -NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo, -mega or gigabytes. - -# cat /cgroups/0/memory.limit_in_bytes -4194304 - -NOTE: The interface has now changed to display the usage in bytes -instead of pages - -We can check the usage: -# cat /cgroups/0/memory.usage_in_bytes -1216512 - -A successful write to this file does not guarantee a successful set of -this limit to the value written into the file. This can be due to a -number of factors, such as rounding up to page boundaries or the total -availability of memory on the system. The user is required to re-read -this file after a write to guarantee the value committed by the kernel. - -# echo 1 > memory.limit_in_bytes -# cat memory.limit_in_bytes -4096 - -The memory.failcnt field gives the number of times that the cgroup limit was -exceeded. - -The memory.stat file gives accounting information. Now, the number of -caches, RSS and Active pages/Inactive pages are shown. - -4. Testing - -Balbir posted lmbench, AIM9, LTP and vmmstress results [10] and [11]. -Apart from that v6 has been tested with several applications and regular -daily use. The controller has also been tested on the PPC64, x86_64 and -UML platforms. - -4.1 Troubleshooting - -Sometimes a user might find that the application under a cgroup is -terminated. There are several causes for this: - -1. The cgroup limit is too low (just too low to do anything useful) -2. The user is using anonymous memory and swap is turned off or too low - -A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of -some of the pages cached in the cgroup (page cache pages). - -4.2 Task migration - -When a task migrates from one cgroup to another, it's charge is not -carried forward. The pages allocated from the original cgroup still -remain charged to it, the charge is dropped when the page is freed or -reclaimed. - -4.3 Removing a cgroup - -A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a -cgroup might have some charge associated with it, even though all -tasks have migrated away from it. -Such charges are freed(at default) or moved to its parent. When moved, -both of RSS and CACHES are moved to parent. -If both of them are busy, rmdir() returns -EBUSY. See 5.1 Also. - -Charges recorded in swap information is not updated at removal of cgroup. -Recorded information is discarded and a cgroup which uses swap (swapcache) -will be charged as a new owner of it. - - -5. Misc. interfaces. - -5.1 force_empty - memory.force_empty interface is provided to make cgroup's memory usage empty. - You can use this interface only when the cgroup has no tasks. - When writing anything to this - - # echo 0 > memory.force_empty - - Almost all pages tracked by this memcg will be unmapped and freed. Some of - pages cannot be freed because it's locked or in-use. Such pages are moved - to parent and this cgroup will be empty. But this may return -EBUSY in - some too busy case. - - Typical use case of this interface is that calling this before rmdir(). - Because rmdir() moves all pages to parent, some out-of-use page caches can be - moved to the parent. If you want to avoid that, force_empty will be useful. - -5.2 stat file - memory.stat file includes following statistics (now) - cache - # of pages from page-cache and shmem. - rss - # of pages from anonymous memory. - pgpgin - # of event of charging - pgpgout - # of event of uncharging - active_anon - # of pages on active lru of anon, shmem. - inactive_anon - # of pages on active lru of anon, shmem - active_file - # of pages on active lru of file-cache - inactive_file - # of pages on inactive lru of file cache - unevictable - # of pages cannot be reclaimed.(mlocked etc) - - Below is depend on CONFIG_DEBUG_VM. - inactive_ratio - VM inernal parameter. (see mm/page_alloc.c) - recent_rotated_anon - VM internal parameter. (see mm/vmscan.c) - recent_rotated_file - VM internal parameter. (see mm/vmscan.c) - recent_scanned_anon - VM internal parameter. (see mm/vmscan.c) - recent_scanned_file - VM internal parameter. (see mm/vmscan.c) - - Memo: - recent_rotated means recent frequency of lru rotation. - recent_scanned means recent # of scans to lru. - showing for better debug please see the code for meanings. - - -5.3 swappiness - Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. - - Following cgroup's swapiness can't be changed. - - root cgroup (uses /proc/sys/vm/swappiness). - - a cgroup which uses hierarchy and it has child cgroup. - - a cgroup which uses hierarchy and not the root of hierarchy. - - -6. Hierarchy support - -The memory controller supports a deep hierarchy and hierarchical accounting. -The hierarchy is created by creating the appropriate cgroups in the -cgroup filesystem. Consider for example, the following cgroup filesystem -hierarchy - - root - / | \ - / | \ - a b c - | \ - | \ - d e - -In the diagram above, with hierarchical accounting enabled, all memory -usage of e, is accounted to its ancestors up until the root (i.e, c and root), -that has memory.use_hierarchy enabled. If one of the ancestors goes over its -limit, the reclaim algorithm reclaims from the tasks in the ancestor and the -children of the ancestor. - -6.1 Enabling hierarchical accounting and reclaim - -The memory controller by default disables the hierarchy feature. Support -can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup - -# echo 1 > memory.use_hierarchy - -The feature can be disabled by - -# echo 0 > memory.use_hierarchy - -NOTE1: Enabling/disabling will fail if the cgroup already has other -cgroups created below it. - -NOTE2: This feature can be enabled/disabled per subtree. - -7. TODO - -1. Add support for accounting huge pages (as a separate controller) -2. Make per-cgroup scanner reclaim not-shared pages first -3. Teach controller to account for shared-pages -4. Start reclamation in the background when the limit is - not yet hit but the usage is getting closer - -Summary - -Overall, the memory controller has been a stable controller and has been -commented and discussed quite extensively in the community. - -References - -1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/ -2. Singh, Balbir. Memory Controller (RSS Control), - http://lwn.net/Articles/222762/ -3. Emelianov, Pavel. Resource controllers based on process cgroups - http://lkml.org/lkml/2007/3/6/198 -4. Emelianov, Pavel. RSS controller based on process cgroups (v2) - http://lkml.org/lkml/2007/4/9/78 -5. Emelianov, Pavel. RSS controller based on process cgroups (v3) - http://lkml.org/lkml/2007/5/30/244 -6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/ -7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control - subsystem (v3), http://lwn.net/Articles/235534/ -8. Singh, Balbir. RSS controller v2 test results (lmbench), - http://lkml.org/lkml/2007/5/17/232 -9. Singh, Balbir. RSS controller v2 AIM9 results - http://lkml.org/lkml/2007/5/18/1 -10. Singh, Balbir. Memory controller v6 test results, - http://lkml.org/lkml/2007/8/19/36 -11. Singh, Balbir. Memory controller introduction (v6), - http://lkml.org/lkml/2007/8/17/69 -12. Corbet, Jonathan, Controlling memory use in cgroups, - http://lwn.net/Articles/243795/ diff --git a/trunk/Documentation/cgroups/cpuacct.txt b/trunk/Documentation/controllers/cpuacct.txt similarity index 100% rename from trunk/Documentation/cgroups/cpuacct.txt rename to trunk/Documentation/controllers/cpuacct.txt diff --git a/trunk/Documentation/cgroups/devices.txt b/trunk/Documentation/controllers/devices.txt similarity index 100% rename from trunk/Documentation/cgroups/devices.txt rename to trunk/Documentation/controllers/devices.txt diff --git a/trunk/Documentation/controllers/memory.txt b/trunk/Documentation/controllers/memory.txt new file mode 100644 index 000000000000..1c07547d3f81 --- /dev/null +++ b/trunk/Documentation/controllers/memory.txt @@ -0,0 +1,284 @@ +Memory Resource Controller + +NOTE: The Memory Resource Controller has been generically been referred +to as the memory controller in this document. Do not confuse memory controller +used here with the memory controller that is used in hardware. + +Salient features + +a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages +b. The infrastructure allows easy addition of other types of memory to control +c. Provides *zero overhead* for non memory controller users +d. Provides a double LRU: global memory pressure causes reclaim from the + global LRU; a cgroup on hitting a limit, reclaims from the per + cgroup LRU + +NOTE: Swap Cache (unmapped) is not accounted now. + +Benefits and Purpose of the memory controller + +The memory controller isolates the memory behaviour of a group of tasks +from the rest of the system. The article on LWN [12] mentions some probable +uses of the memory controller. The memory controller can be used to + +a. Isolate an application or a group of applications + Memory hungry applications can be isolated and limited to a smaller + amount of memory. +b. Create a cgroup with limited amount of memory, this can be used + as a good alternative to booting with mem=XXXX. +c. Virtualization solutions can control the amount of memory they want + to assign to a virtual machine instance. +d. A CD/DVD burner could control the amount of memory used by the + rest of the system to ensure that burning does not fail due to lack + of available memory. +e. There are several other use cases, find one or use the controller just + for fun (to learn and hack on the VM subsystem). + +1. History + +The memory controller has a long history. A request for comments for the memory +controller was posted by Balbir Singh [1]. At the time the RFC was posted +there were several implementations for memory control. The goal of the +RFC was to build consensus and agreement for the minimal features required +for memory control. The first RSS controller was posted by Balbir Singh[2] +in Feb 2007. Pavel Emelianov [3][4][5] has since posted three versions of the +RSS controller. At OLS, at the resource management BoF, everyone suggested +that we handle both page cache and RSS together. Another request was raised +to allow user space handling of OOM. The current memory controller is +at version 6; it combines both mapped (RSS) and unmapped Page +Cache Control [11]. + +2. Memory Control + +Memory is a unique resource in the sense that it is present in a limited +amount. If a task requires a lot of CPU processing, the task can spread +its processing over a period of hours, days, months or years, but with +memory, the same physical memory needs to be reused to accomplish the task. + +The memory controller implementation has been divided into phases. These +are: + +1. Memory controller +2. mlock(2) controller +3. Kernel user memory accounting and slab control +4. user mappings length controller + +The memory controller is the first controller developed. + +2.1. Design + +The core of the design is a counter called the res_counter. The res_counter +tracks the current memory usage and limit of the group of processes associated +with the controller. Each cgroup has a memory controller specific data +structure (mem_cgroup) associated with it. + +2.2. Accounting + + +--------------------+ + | mem_cgroup | + | (res_counter) | + +--------------------+ + / ^ \ + / | \ + +---------------+ | +---------------+ + | mm_struct | |.... | mm_struct | + | | | | | + +---------------+ | +---------------+ + | + + --------------+ + | + +---------------+ +------+--------+ + | page +----------> page_cgroup| + | | | | + +---------------+ +---------------+ + + (Figure 1: Hierarchy of Accounting) + + +Figure 1 shows the important aspects of the controller + +1. Accounting happens per cgroup +2. Each mm_struct knows about which cgroup it belongs to +3. Each page has a pointer to the page_cgroup, which in turn knows the + cgroup it belongs to + +The accounting is done as follows: mem_cgroup_charge() is invoked to setup +the necessary data structures and check if the cgroup that is being charged +is over its limit. If it is then reclaim is invoked on the cgroup. +More details can be found in the reclaim section of this document. +If everything goes well, a page meta-data-structure called page_cgroup is +allocated and associated with the page. This routine also adds the page to +the per cgroup LRU. + +2.2.1 Accounting details + +All mapped anon pages (RSS) and cache pages (Page Cache) are accounted. +(some pages which never be reclaimable and will not be on global LRU + are not accounted. we just accounts pages under usual vm management.) + +RSS pages are accounted at page_fault unless they've already been accounted +for earlier. A file page will be accounted for as Page Cache when it's +inserted into inode (radix-tree). While it's mapped into the page tables of +processes, duplicate accounting is carefully avoided. + +A RSS page is unaccounted when it's fully unmapped. A PageCache page is +unaccounted when it's removed from radix-tree. + +At page migration, accounting information is kept. + +Note: we just account pages-on-lru because our purpose is to control amount +of used pages. not-on-lru pages are tend to be out-of-control from vm view. + +2.3 Shared Page Accounting + +Shared pages are accounted on the basis of the first touch approach. The +cgroup that first touches a page is accounted for the page. The principle +behind this approach is that a cgroup that aggressively uses a shared +page will eventually get charged for it (once it is uncharged from +the cgroup that brought it in -- this will happen on memory pressure). + +2.4 Reclaim + +Each cgroup maintains a per cgroup LRU that consists of an active +and inactive list. When a cgroup goes over its limit, we first try +to reclaim memory from the cgroup so as to make space for the new +pages that the cgroup has touched. If the reclaim is unsuccessful, +an OOM routine is invoked to select and kill the bulkiest task in the +cgroup. + +The reclaim algorithm has not been modified for cgroups, except that +pages that are selected for reclaiming come from the per cgroup LRU +list. + +2. Locking + +The memory controller uses the following hierarchy + +1. zone->lru_lock is used for selecting pages to be isolated +2. mem->per_zone->lru_lock protects the per cgroup LRU (per zone) +3. lock_page_cgroup() is used to protect page->page_cgroup + +3. User Interface + +0. Configuration + +a. Enable CONFIG_CGROUPS +b. Enable CONFIG_RESOURCE_COUNTERS +c. Enable CONFIG_CGROUP_MEM_RES_CTLR + +1. Prepare the cgroups +# mkdir -p /cgroups +# mount -t cgroup none /cgroups -o memory + +2. Make the new group and move bash into it +# mkdir /cgroups/0 +# echo $$ > /cgroups/0/tasks + +Since now we're in the 0 cgroup, +We can alter the memory limit: +# echo 4M > /cgroups/0/memory.limit_in_bytes + +NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo, +mega or gigabytes. + +# cat /cgroups/0/memory.limit_in_bytes +4194304 + +NOTE: The interface has now changed to display the usage in bytes +instead of pages + +We can check the usage: +# cat /cgroups/0/memory.usage_in_bytes +1216512 + +A successful write to this file does not guarantee a successful set of +this limit to the value written into the file. This can be due to a +number of factors, such as rounding up to page boundaries or the total +availability of memory on the system. The user is required to re-read +this file after a write to guarantee the value committed by the kernel. + +# echo 1 > memory.limit_in_bytes +# cat memory.limit_in_bytes +4096 + +The memory.failcnt field gives the number of times that the cgroup limit was +exceeded. + +The memory.stat file gives accounting information. Now, the number of +caches, RSS and Active pages/Inactive pages are shown. + +The memory.force_empty gives an interface to drop *all* charges by force. + +# echo 1 > memory.force_empty + +will drop all charges in cgroup. Currently, this is maintained for test. + +4. Testing + +Balbir posted lmbench, AIM9, LTP and vmmstress results [10] and [11]. +Apart from that v6 has been tested with several applications and regular +daily use. The controller has also been tested on the PPC64, x86_64 and +UML platforms. + +4.1 Troubleshooting + +Sometimes a user might find that the application under a cgroup is +terminated. There are several causes for this: + +1. The cgroup limit is too low (just too low to do anything useful) +2. The user is using anonymous memory and swap is turned off or too low + +A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of +some of the pages cached in the cgroup (page cache pages). + +4.2 Task migration + +When a task migrates from one cgroup to another, it's charge is not +carried forward. The pages allocated from the original cgroup still +remain charged to it, the charge is dropped when the page is freed or +reclaimed. + +4.3 Removing a cgroup + +A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a +cgroup might have some charge associated with it, even though all +tasks have migrated away from it. Such charges are automatically dropped at +rmdir() if there are no tasks. + +5. TODO + +1. Add support for accounting huge pages (as a separate controller) +2. Make per-cgroup scanner reclaim not-shared pages first +3. Teach controller to account for shared-pages +4. Start reclamation in the background when the limit is + not yet hit but the usage is getting closer + +Summary + +Overall, the memory controller has been a stable controller and has been +commented and discussed quite extensively in the community. + +References + +1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/ +2. Singh, Balbir. Memory Controller (RSS Control), + http://lwn.net/Articles/222762/ +3. Emelianov, Pavel. Resource controllers based on process cgroups + http://lkml.org/lkml/2007/3/6/198 +4. Emelianov, Pavel. RSS controller based on process cgroups (v2) + http://lkml.org/lkml/2007/4/9/78 +5. Emelianov, Pavel. RSS controller based on process cgroups (v3) + http://lkml.org/lkml/2007/5/30/244 +6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/ +7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control + subsystem (v3), http://lwn.net/Articles/235534/ +8. Singh, Balbir. RSS controller v2 test results (lmbench), + http://lkml.org/lkml/2007/5/17/232 +9. Singh, Balbir. RSS controller v2 AIM9 results + http://lkml.org/lkml/2007/5/18/1 +10. Singh, Balbir. Memory controller v6 test results, + http://lkml.org/lkml/2007/8/19/36 +11. Singh, Balbir. Memory controller introduction (v6), + http://lkml.org/lkml/2007/8/17/69 +12. Corbet, Jonathan, Controlling memory use in cgroups, + http://lwn.net/Articles/243795/ diff --git a/trunk/Documentation/cgroups/resource_counter.txt b/trunk/Documentation/controllers/resource_counter.txt similarity index 100% rename from trunk/Documentation/cgroups/resource_counter.txt rename to trunk/Documentation/controllers/resource_counter.txt diff --git a/trunk/Documentation/cgroups/cpusets.txt b/trunk/Documentation/cpusets.txt similarity index 100% rename from trunk/Documentation/cgroups/cpusets.txt rename to trunk/Documentation/cpusets.txt diff --git a/trunk/Documentation/crypto/async-tx-api.txt b/trunk/Documentation/crypto/async-tx-api.txt index 9f59fcbf5d82..c1e9545c59bd 100644 --- a/trunk/Documentation/crypto/async-tx-api.txt +++ b/trunk/Documentation/crypto/async-tx-api.txt @@ -13,9 +13,9 @@ 3.6 Constraints 3.7 Example -4 DMAENGINE DRIVER DEVELOPER NOTES +4 DRIVER DEVELOPER NOTES 4.1 Conformance points -4.2 "My application needs exclusive control of hardware channels" +4.2 "My application needs finer control of hardware channels" 5 SOURCE @@ -150,7 +150,6 @@ ops_run_* and ops_complete_* routines in drivers/md/raid5.c for more implementation examples. 4 DRIVER DEVELOPMENT NOTES - 4.1 Conformance points: There are a few conformance points required in dmaengine drivers to accommodate assumptions made by applications using the async_tx API: @@ -159,49 +158,58 @@ accommodate assumptions made by applications using the async_tx API: 3/ Use async_tx_run_dependencies() in the descriptor clean up path to handle submission of dependent operations -4.2 "My application needs exclusive control of hardware channels" -Primarily this requirement arises from cases where a DMA engine driver -is being used to support device-to-memory operations. A channel that is -performing these operations cannot, for many platform specific reasons, -be shared. For these cases the dma_request_channel() interface is -provided. - -The interface is: -struct dma_chan *dma_request_channel(dma_cap_mask_t mask, - dma_filter_fn filter_fn, - void *filter_param); - -Where dma_filter_fn is defined as: -typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param); - -When the optional 'filter_fn' parameter is set to NULL -dma_request_channel simply returns the first channel that satisfies the -capability mask. Otherwise, when the mask parameter is insufficient for -specifying the necessary channel, the filter_fn routine can be used to -disposition the available channels in the system. The filter_fn routine -is called once for each free channel in the system. Upon seeing a -suitable channel filter_fn returns DMA_ACK which flags that channel to -be the return value from dma_request_channel. A channel allocated via -this interface is exclusive to the caller, until dma_release_channel() -is called. - -The DMA_PRIVATE capability flag is used to tag dma devices that should -not be used by the general-purpose allocator. It can be set at -initialization time if it is known that a channel will always be -private. Alternatively, it is set when dma_request_channel() finds an -unused "public" channel. - -A couple caveats to note when implementing a driver and consumer: -1/ Once a channel has been privately allocated it will no longer be - considered by the general-purpose allocator even after a call to - dma_release_channel(). -2/ Since capabilities are specified at the device level a dma_device - with multiple channels will either have all channels public, or all - channels private. +4.2 "My application needs finer control of hardware channels" +This requirement seems to arise from cases where a DMA engine driver is +trying to support device-to-memory DMA. The dmaengine and async_tx +implementations were designed for offloading memory-to-memory +operations; however, there are some capabilities of the dmaengine layer +that can be used for platform-specific channel management. +Platform-specific constraints can be handled by registering the +application as a 'dma_client' and implementing a 'dma_event_callback' to +apply a filter to the available channels in the system. Before showing +how to implement a custom dma_event callback some background of +dmaengine's client support is required. + +The following routines in dmaengine support multiple clients requesting +use of a channel: +- dma_async_client_register(struct dma_client *client) +- dma_async_client_chan_request(struct dma_client *client) + +dma_async_client_register takes a pointer to an initialized dma_client +structure. It expects that the 'event_callback' and 'cap_mask' fields +are already initialized. + +dma_async_client_chan_request triggers dmaengine to notify the client of +all channels that satisfy the capability mask. It is up to the client's +event_callback routine to track how many channels the client needs and +how many it is currently using. The dma_event_callback routine returns a +dma_state_client code to let dmaengine know the status of the +allocation. + +Below is the example of how to extend this functionality for +platform-specific filtering of the available channels beyond the +standard capability mask: + +static enum dma_state_client +my_dma_client_callback(struct dma_client *client, + struct dma_chan *chan, enum dma_state state) +{ + struct dma_device *dma_dev; + struct my_platform_specific_dma *plat_dma_dev; + + dma_dev = chan->device; + plat_dma_dev = container_of(dma_dev, + struct my_platform_specific_dma, + dma_dev); + + if (!plat_dma_dev->platform_specific_capability) + return DMA_DUP; + + . . . +} 5 SOURCE - -include/linux/dmaengine.h: core header file for DMA drivers and api users +include/linux/dmaengine.h: core header file for DMA drivers and clients drivers/dma/dmaengine.c: offload engine channel management routines drivers/dma/: location for offload engine drivers include/linux/async_tx.h: core header file for the async_tx api diff --git a/trunk/Documentation/dell_rbu.txt b/trunk/Documentation/dell_rbu.txt index c11b931f8f98..2c0d631de0cf 100644 --- a/trunk/Documentation/dell_rbu.txt +++ b/trunk/Documentation/dell_rbu.txt @@ -81,8 +81,8 @@ Until this step is completed the driver cannot be unloaded. Also echoing either mono ,packet or init in to image_type will free up the memory allocated by the driver. -If a user by accident executes steps 1 and 3 above without executing step 2; -it will make the /sys/class/firmware/dell_rbu/ entries disappear. +If an user by accident executes steps 1 and 3 above without executing step 2; +it will make the /sys/class/firmware/dell_rbu/ entries to disappear. The entries can be recreated by doing the following echo init > /sys/devices/platform/dell_rbu/image_type NOTE: echoing init in image_type does not change it original value. diff --git a/trunk/Documentation/development-process/4.Coding b/trunk/Documentation/development-process/4.Coding index a5a3450faaa0..014aca8f14e2 100644 --- a/trunk/Documentation/development-process/4.Coding +++ b/trunk/Documentation/development-process/4.Coding @@ -375,10 +375,10 @@ say, this can be a large job, so it is best to be sure that the justification is solid. When making an incompatible API change, one should, whenever possible, -ensure that code which has not been updated is caught by the compiler. +ensure that code which has not been updated is caught by the compiler. This will help you to be sure that you have found all in-tree uses of that interface. It will also alert developers of out-of-tree code that there is a change that they need to respond to. Supporting out-of-tree code is not something that kernel developers need to be worried about, but we also do -not have to make life harder for out-of-tree developers than it needs to -be. +not have to make life harder for out-of-tree developers than it it needs to +be. diff --git a/trunk/Documentation/dmaengine.txt b/trunk/Documentation/dmaengine.txt deleted file mode 100644 index 0c1c2f63c0a9..000000000000 --- a/trunk/Documentation/dmaengine.txt +++ /dev/null @@ -1 +0,0 @@ -See Documentation/crypto/async-tx-api.txt diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt index 5ddbe350487a..df18d87c4837 100644 --- a/trunk/Documentation/feature-removal-schedule.txt +++ b/trunk/Documentation/feature-removal-schedule.txt @@ -315,23 +315,3 @@ When: 2.6.29 (ideally) or 2.6.30 (more likely) Why: Deprecated by the new (standard) device driver binding model. Use i2c_driver->probe() and ->remove() instead. Who: Jean Delvare - ---------------------------- - -What: fscher and fscpos drivers -When: June 2009 -Why: Deprecated by the new fschmd driver. -Who: Hans de Goede - Jean Delvare - ---------------------------- - -What: SELinux "compat_net" functionality -When: 2.6.30 at the earliest -Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net" - network access control functionality of SELinux. Secmark offers both - better performance and greater flexibility than the "compat_net" - mechanism. Now that the major Linux distributions have moved to - Secmark, it is time to deprecate the older mechanism and start the - process of removing the old code. -Who: Paul Moore diff --git a/trunk/Documentation/filesystems/Locking b/trunk/Documentation/filesystems/Locking index ec6a9392a173..ccec55394380 100644 --- a/trunk/Documentation/filesystems/Locking +++ b/trunk/Documentation/filesystems/Locking @@ -97,8 +97,8 @@ prototypes: void (*put_super) (struct super_block *); void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); - int (*freeze_fs) (struct super_block *); - int (*unfreeze_fs) (struct super_block *); + void (*write_super_lockfs) (struct super_block *); + void (*unlockfs) (struct super_block *); int (*statfs) (struct dentry *, struct kstatfs *); int (*remount_fs) (struct super_block *, int *, char *); void (*clear_inode) (struct inode *); @@ -119,8 +119,8 @@ delete_inode: no put_super: yes yes no write_super: no yes read sync_fs: no no read -freeze_fs: ? -unfreeze_fs: ? +write_super_lockfs: ? +unlockfs: ? statfs: no no no remount_fs: yes yes maybe (see below) clear_inode: no @@ -397,7 +397,7 @@ prototypes: }; locking rules: - All may block. + All except ->poll() may block. BKL llseek: no (see below) read: no diff --git a/trunk/Documentation/filesystems/btrfs.txt b/trunk/Documentation/filesystems/btrfs.txt deleted file mode 100644 index 64087c34327f..000000000000 --- a/trunk/Documentation/filesystems/btrfs.txt +++ /dev/null @@ -1,91 +0,0 @@ - - BTRFS - ===== - -Btrfs is a new copy on write filesystem for Linux aimed at -implementing advanced features while focusing on fault tolerance, -repair and easy administration. Initially developed by Oracle, Btrfs -is licensed under the GPL and open for contribution from anyone. - -Linux has a wealth of filesystems to choose from, but we are facing a -number of challenges with scaling to the large storage subsystems that -are becoming common in today's data centers. Filesystems need to scale -in their ability to address and manage large storage, and also in -their ability to detect, repair and tolerate errors in the data stored -on disk. Btrfs is under heavy development, and is not suitable for -any uses other than benchmarking and review. The Btrfs disk format is -not yet finalized. - -The main Btrfs features include: - - * Extent based file storage (2^64 max file size) - * Space efficient packing of small files - * Space efficient indexed directories - * Dynamic inode allocation - * Writable snapshots - * Subvolumes (separate internal filesystem roots) - * Object level mirroring and striping - * Checksums on data and metadata (multiple algorithms available) - * Compression - * Integrated multiple device support, with several raid algorithms - * Online filesystem check (not yet implemented) - * Very fast offline filesystem check - * Efficient incremental backup and FS mirroring (not yet implemented) - * Online filesystem defragmentation - - - - MAILING LIST - ============ - -There is a Btrfs mailing list hosted on vger.kernel.org. You can -find details on how to subscribe here: - -http://vger.kernel.org/vger-lists.html#linux-btrfs - -Mailing list archives are available from gmane: - -http://dir.gmane.org/gmane.comp.file-systems.btrfs - - - - IRC - === - -Discussion of Btrfs also occurs on the #btrfs channel of the Freenode -IRC network. - - - - UTILITIES - ========= - -Userspace tools for creating and manipulating Btrfs file systems are -available from the git repository at the following location: - - http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git - git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git - -These include the following tools: - -mkfs.btrfs: create a filesystem - -btrfsctl: control program to create snapshots and subvolumes: - - mount /dev/sda2 /mnt - btrfsctl -s new_subvol_name /mnt - btrfsctl -s snapshot_of_default /mnt/default - btrfsctl -s snapshot_of_new_subvol /mnt/new_subvol_name - btrfsctl -s snapshot_of_a_snapshot /mnt/snapshot_of_new_subvol - ls /mnt - default snapshot_of_a_snapshot snapshot_of_new_subvol - new_subvol_name snapshot_of_default - - Snapshots and subvolumes cannot be deleted right now, but you can - rm -rf all the files and directories inside them. - -btrfsck: do a limited check of the FS extent trees. - -btrfs-debug-tree: print all of the FS metadata in text form. Example: - - btrfs-debug-tree /dev/sda2 >& big_output_file diff --git a/trunk/Documentation/filesystems/ext4.txt b/trunk/Documentation/filesystems/ext4.txt index cec829bc7291..174eaff7ded9 100644 --- a/trunk/Documentation/filesystems/ext4.txt +++ b/trunk/Documentation/filesystems/ext4.txt @@ -58,22 +58,13 @@ Note: More extensive information for getting started with ext4 can be # mount -t ext4 /dev/hda1 /wherever - - When comparing performance with other filesystems, it's always - important to try multiple workloads; very often a subtle change in a - workload parameter can completely change the ranking of which - filesystems do well compared to others. When comparing versus ext3, - note that ext4 enables write barriers by default, while ext3 does - not enable write barriers by default. So it is useful to use - explicitly specify whether barriers are enabled or not when via the - '-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems - for a fair comparison. When tuning ext3 for best benchmark numbers, - it is often worthwhile to try changing the data journaling mode; '-o - data=writeback,nobh' can be faster for some workloads. (Note - however that running mounted with data=writeback can potentially - leave stale data exposed in recently written files in case of an - unclean shutdown, which could be a security exposure in some - situations.) Configuring the filesystem with a large journal can - also be helpful for metadata-intensive workloads. + - When comparing performance with other filesystems, remember that + ext3/4 by default offers higher data integrity guarantees than most. + So when comparing with a metadata-only journalling filesystem, such + as ext3, use `mount -o data=writeback'. And you might as well use + `mount -o nobh' too along with it. Making the journal larger than + the mke2fs default often helps performance with metadata-intensive + workloads. 2. Features =========== @@ -83,7 +74,7 @@ Note: More extensive information for getting started with ext4 can be * ability to use filesystems > 16TB (e2fsprogs support not available yet) * extent format reduces metadata overhead (RAM, IO for access, transactions) * extent format more robust in face of on-disk corruption due to magics, -* internal redundancy in tree +* internal redunancy in tree * improved file allocation (multi-block alloc) * fix 32000 subdirectory limit * nsec timestamps for mtime, atime, ctime, create time @@ -125,11 +116,10 @@ grouping of bitmaps and inode tables. Some test results available here: When mounting an ext4 filesystem, the following option are accepted: (*) == default -ro Mount filesystem read only. Note that ext4 will - replay the journal (and thus write to the - partition) even when mounted "read only". The - mount options "ro,noload" can be used to prevent - writes to the filesystem. +extents (*) ext4 will use extents to address file data. The + file system will no longer be mountable by ext3. + +noextents ext4 will not use extents for newly created files journal_checksum Enable checksumming of the journal transactions. This will allow the recovery code in e2fsck and the @@ -144,17 +134,17 @@ journal_async_commit Commit block can be written to disk without waiting journal=update Update the ext4 file system's journal to the current format. +journal=inum When a journal already exists, this option is ignored. + Otherwise, it specifies the number of the inode which + will represent the ext4 file system's journal file. + journal_dev=devnum When the external journal device's major/minor numbers have changed, this option allows the user to specify the new journal location. The journal device is identified through its new major/minor numbers encoded in devnum. -noload Don't load the journal on mounting. Note that - if the filesystem was not unmounted cleanly, - skipping the journal replay will lead to the - filesystem containing inconsistencies that can - lead to any number of problems. +noload Don't load the journal on mounting. data=journal All data are committed into the journal prior to being written into the main file system. @@ -229,12 +219,9 @@ minixdf Make 'df' act like Minix. debug Extra debugging information is sent to syslog. -errors=remount-ro Remount the filesystem read-only on an error. +errors=remount-ro(*) Remount the filesystem read-only on an error. errors=continue Keep going on a filesystem error. errors=panic Panic and halt the machine if an error occurs. - (These mount options override the errors behavior - specified in the superblock, which can be configured - using tune2fs) data_err=ignore(*) Just print an error message if an error occurs in a file data buffer in ordered mode. @@ -274,42 +261,6 @@ delalloc (*) Deferring block allocation until write-out time. nodelalloc Disable delayed allocation. Blocks are allocation when data is copied from user to page cache. -max_batch_time=usec Maximum amount of time ext4 should wait for - additional filesystem operations to be batch - together with a synchronous write operation. - Since a synchronous write operation is going to - force a commit and then a wait for the I/O - complete, it doesn't cost much, and can be a - huge throughput win, we wait for a small amount - of time to see if any other transactions can - piggyback on the synchronous write. The - algorithm used is designed to automatically tune - for the speed of the disk, by measuring the - amount of time (on average) that it takes to - finish committing a transaction. Call this time - the "commit time". If the time that the - transactoin has been running is less than the - commit time, ext4 will try sleeping for the - commit time to see if other operations will join - the transaction. The commit time is capped by - the max_batch_time, which defaults to 15000us - (15ms). This optimization can be turned off - entirely by setting max_batch_time to 0. - -min_batch_time=usec This parameter sets the commit time (as - described above) to be at least min_batch_time. - It defaults to zero microseconds. Increasing - this parameter may improve the throughput of - multi-threaded, synchronous workloads on very - fast disks, at the cost of increasing latency. - -journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the - highest priorty) which should be used for I/O - operations submitted by kjournald2 during a - commit operation. This defaults to 3, which is - a slightly higher priority than the default I/O - priority. - Data Mode ========= There are 3 different data modes: diff --git a/trunk/Documentation/filesystems/nfs-rdma.txt b/trunk/Documentation/filesystems/nfs-rdma.txt index 85eaeaddd27c..44bd766f2e5d 100644 --- a/trunk/Documentation/filesystems/nfs-rdma.txt +++ b/trunk/Documentation/filesystems/nfs-rdma.txt @@ -251,7 +251,7 @@ NFS/RDMA Setup Instruct the server to listen on the RDMA transport: - $ echo rdma 20049 > /proc/fs/nfsd/portlist + $ echo rdma 2050 > /proc/fs/nfsd/portlist - On the client system @@ -263,7 +263,7 @@ NFS/RDMA Setup Regardless of how the client was built (module or built-in), use this command to mount the NFS/RDMA server: - $ mount -o rdma,port=20049 :/ /mnt + $ mount -o rdma,port=2050 :/ /mnt To verify that the mount is using RDMA, run "cat /proc/mounts" and check the "proto" field for the given mount. diff --git a/trunk/Documentation/filesystems/proc.txt b/trunk/Documentation/filesystems/proc.txt index a87be42f8211..71df353e367c 100644 --- a/trunk/Documentation/filesystems/proc.txt +++ b/trunk/Documentation/filesystems/proc.txt @@ -140,7 +140,6 @@ Table 1-1: Process specific entries in /proc statm Process memory status information status Process status in human readable form wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan - stack Report full stack trace, enable via CONFIG_STACKTRACE smaps Extension based on maps, the rss size for each mapped file .............................................................................. @@ -1371,8 +1370,268 @@ auto_msgmni default value is 1. 2.4 /proc/sys/vm - The virtual memory subsystem ----------------------------------------------- -Please see: Documentation/sysctls/vm.txt for a description of these -entries. +The files in this directory can be used to tune the operation of the virtual +memory (VM) subsystem of the Linux kernel. + +vfs_cache_pressure +------------------ + +Controls the tendency of the kernel to reclaim the memory which is used for +caching of directory and inode objects. + +At the default value of vfs_cache_pressure=100 the kernel will attempt to +reclaim dentries and inodes at a "fair" rate with respect to pagecache and +swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer +to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100 +causes the kernel to prefer to reclaim dentries and inodes. + +dirty_background_ratio +---------------------- + +Contains, as a percentage of the dirtyable system memory (free pages + mapped +pages + file cache, not including locked pages and HugePages), the number of +pages at which the pdflush background writeback daemon will start writing out +dirty data. + +dirty_ratio +----------------- + +Contains, as a percentage of the dirtyable system memory (free pages + mapped +pages + file cache, not including locked pages and HugePages), the number of +pages at which a process which is generating disk writes will itself start +writing out dirty data. + +dirty_writeback_centisecs +------------------------- + +The pdflush writeback daemons will periodically wake up and write `old' data +out to disk. This tunable expresses the interval between those wakeups, in +100'ths of a second. + +Setting this to zero disables periodic writeback altogether. + +dirty_expire_centisecs +---------------------- + +This tunable is used to define when dirty data is old enough to be eligible +for writeout by the pdflush daemons. It is expressed in 100'ths of a second. +Data which has been dirty in-memory for longer than this interval will be +written out next time a pdflush daemon wakes up. + +highmem_is_dirtyable +-------------------- + +Only present if CONFIG_HIGHMEM is set. + +This defaults to 0 (false), meaning that the ratios set above are calculated +as a percentage of lowmem only. This protects against excessive scanning +in page reclaim, swapping and general VM distress. + +Setting this to 1 can be useful on 32 bit machines where you want to make +random changes within an MMAPed file that is larger than your available +lowmem without causing large quantities of random IO. Is is safe if the +behavior of all programs running on the machine is known and memory will +not be otherwise stressed. + +legacy_va_layout +---------------- + +If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel +will use the legacy (2.4) layout for all processes. + +lowmem_reserve_ratio +--------------------- + +For some specialised workloads on highmem machines it is dangerous for +the kernel to allow process memory to be allocated from the "lowmem" +zone. This is because that memory could then be pinned via the mlock() +system call, or by unavailability of swapspace. + +And on large highmem machines this lack of reclaimable lowmem memory +can be fatal. + +So the Linux page allocator has a mechanism which prevents allocations +which _could_ use highmem from using too much lowmem. This means that +a certain amount of lowmem is defended from the possibility of being +captured into pinned user memory. + +(The same argument applies to the old 16 megabyte ISA DMA region. This +mechanism will also defend that region from allocations which could use +highmem or lowmem). + +The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is +in defending these lower zones. + +If you have a machine which uses highmem or ISA DMA and your +applications are using mlock(), or if you are running with no swap then +you probably should change the lowmem_reserve_ratio setting. + +The lowmem_reserve_ratio is an array. You can see them by reading this file. +- +% cat /proc/sys/vm/lowmem_reserve_ratio +256 256 32 +- +Note: # of this elements is one fewer than number of zones. Because the highest + zone's value is not necessary for following calculation. + +But, these values are not used directly. The kernel calculates # of protection +pages for each zones from them. These are shown as array of protection pages +in /proc/zoneinfo like followings. (This is an example of x86-64 box). +Each zone has an array of protection pages like this. + +- +Node 0, zone DMA + pages free 1355 + min 3 + low 3 + high 4 + : + : + numa_other 0 + protection: (0, 2004, 2004, 2004) + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + pagesets + cpu: 0 pcp: 0 + : +- +These protections are added to score to judge whether this zone should be used +for page allocation or should be reclaimed. + +In this example, if normal pages (index=2) are required to this DMA zone and +pages_high is used for watermark, the kernel judges this zone should not be +used because pages_free(1355) is smaller than watermark + protection[2] +(4 + 2004 = 2008). If this protection value is 0, this zone would be used for +normal page requirement. If requirement is DMA zone(index=0), protection[0] +(=0) is used. + +zone[i]'s protection[j] is calculated by following expression. + +(i < j): + zone[i]->protection[j] + = (total sums of present_pages from zone[i+1] to zone[j] on the node) + / lowmem_reserve_ratio[i]; +(i = j): + (should not be protected. = 0; +(i > j): + (not necessary, but looks 0) + +The default values of lowmem_reserve_ratio[i] are + 256 (if zone[i] means DMA or DMA32 zone) + 32 (others). +As above expression, they are reciprocal number of ratio. +256 means 1/256. # of protection pages becomes about "0.39%" of total present +pages of higher zones on the node. + +If you would like to protect more pages, smaller values are effective. +The minimum value is 1 (1/1 -> 100%). + +page-cluster +------------ + +page-cluster controls the number of pages which are written to swap in +a single attempt. The swap I/O size. + +It is a logarithmic value - setting it to zero means "1 page", setting +it to 1 means "2 pages", setting it to 2 means "4 pages", etc. + +The default value is three (eight pages at a time). There may be some +small benefits in tuning this to a different value if your workload is +swap-intensive. + +overcommit_memory +----------------- + +Controls overcommit of system memory, possibly allowing processes +to allocate (but not use) more memory than is actually available. + + +0 - Heuristic overcommit handling. Obvious overcommits of + address space are refused. Used for a typical system. It + ensures a seriously wild allocation fails while allowing + overcommit to reduce swap usage. root is allowed to + allocate slightly more memory in this mode. This is the + default. + +1 - Always overcommit. Appropriate for some scientific + applications. + +2 - Don't overcommit. The total address space commit + for the system is not permitted to exceed swap plus a + configurable percentage (default is 50) of physical RAM. + Depending on the percentage you use, in most situations + this means a process will not be killed while attempting + to use already-allocated memory but will receive errors + on memory allocation as appropriate. + +overcommit_ratio +---------------- + +Percentage of physical memory size to include in overcommit calculations +(see above.) + +Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100) + + swapspace = total size of all swap areas + physmem = size of physical memory in system + +nr_hugepages and hugetlb_shm_group +---------------------------------- + +nr_hugepages configures number of hugetlb page reserved for the system. + +hugetlb_shm_group contains group id that is allowed to create SysV shared +memory segment using hugetlb page. + +hugepages_treat_as_movable +-------------------------- + +This parameter is only useful when kernelcore= is specified at boot time to +create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages +are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero +value written to hugepages_treat_as_movable allows huge pages to be allocated +from ZONE_MOVABLE. + +Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge +pages pool can easily grow or shrink within. Assuming that applications are +not running that mlock() a lot of memory, it is likely the huge pages pool +can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value +into nr_hugepages and triggering page reclaim. + +laptop_mode +----------- + +laptop_mode is a knob that controls "laptop mode". All the things that are +controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt. + +block_dump +---------- + +block_dump enables block I/O debugging when set to a nonzero value. More +information on block I/O debugging is in Documentation/laptops/laptop-mode.txt. + +swap_token_timeout +------------------ + +This file contains valid hold time of swap out protection token. The Linux +VM has token based thrashing control mechanism and uses the token to prevent +unnecessary page faults in thrashing situation. The unit of the value is +second. The value would be useful to tune thrashing behavior. + +drop_caches +----------- + +Writing to this will cause the kernel to drop clean caches, dentries and +inodes from memory, causing that memory to become free. + +To free pagecache: + echo 1 > /proc/sys/vm/drop_caches +To free dentries and inodes: + echo 2 > /proc/sys/vm/drop_caches +To free pagecache, dentries and inodes: + echo 3 > /proc/sys/vm/drop_caches + +As this is a non-destructive operation and dirty objects are not freeable, the +user should run `sync' first. 2.5 /proc/sys/dev - Device specific parameters @@ -2027,34 +2286,6 @@ increase the likelihood of this process being killed by the oom-killer. Valid values are in the range -16 to +15, plus the special value -17, which disables oom-killing altogether for this process. -The process to be killed in an out-of-memory situation is selected among all others -based on its badness score. This value equals the original memory size of the process -and is then updated according to its CPU time (utime + stime) and the -run time (uptime - start time). The longer it runs the smaller is the score. -Badness score is divided by the square root of the CPU time and then by -the double square root of the run time. - -Swapped out tasks are killed first. Half of each child's memory size is added to -the parent's score if they do not share the same memory. Thus forking servers -are the prime candidates to be killed. Having only one 'hungry' child will make -parent less preferable than the child. - -/proc//oom_score shows process' current badness score. - -The following heuristics are then applied: - * if the task was reniced, its score doubles - * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE - or CAP_SYS_RAWIO) have their score divided by 4 - * if oom condition happened in one cpuset and checked task does not belong - to it, its score is divided by 8 - * the resulting score is multiplied by two to the power of oom_adj, i.e. - points <<= oom_adj when it is positive and - points >>= -(oom_adj) otherwise - -The task with the highest badness score is then selected and its children -are killed, process itself will be killed in an OOM situation when it does -not have children or some of them disabled oom like described above. - 2.13 /proc//oom_score - Display current oom-killer score ------------------------------------------------------------- diff --git a/trunk/Documentation/filesystems/squashfs.txt b/trunk/Documentation/filesystems/squashfs.txt deleted file mode 100644 index 3e79e4a7a392..000000000000 --- a/trunk/Documentation/filesystems/squashfs.txt +++ /dev/null @@ -1,225 +0,0 @@ -SQUASHFS 4.0 FILESYSTEM -======================= - -Squashfs is a compressed read-only filesystem for Linux. -It uses zlib compression to compress files, inodes and directories. -Inodes in the system are very small and all blocks are packed to minimise -data overhead. Block sizes greater than 4K are supported up to a maximum -of 1Mbytes (default block size 128K). - -Squashfs is intended for general read-only filesystem use, for archival -use (i.e. in cases where a .tar.gz file may be used), and in constrained -block device/memory systems (e.g. embedded systems) where low overhead is -needed. - -Mailing list: squashfs-devel@lists.sourceforge.net -Web site: www.squashfs.org - -1. FILESYSTEM FEATURES ----------------------- - -Squashfs filesystem features versus Cramfs: - - Squashfs Cramfs - -Max filesystem size: 2^64 16 MiB -Max file size: ~ 2 TiB 16 MiB -Max files: unlimited unlimited -Max directories: unlimited unlimited -Max entries per directory: unlimited unlimited -Max block size: 1 MiB 4 KiB -Metadata compression: yes no -Directory indexes: yes no -Sparse file support: yes no -Tail-end packing (fragments): yes no -Exportable (NFS etc.): yes no -Hard link support: yes no -"." and ".." in readdir: yes no -Real inode numbers: yes no -32-bit uids/gids: yes no -File creation time: yes no -Xattr and ACL support: no no - -Squashfs compresses data, inodes and directories. In addition, inode and -directory data are highly compacted, and packed on byte boundaries. Each -compressed inode is on average 8 bytes in length (the exact length varies on -file type, i.e. regular file, directory, symbolic link, and block/char device -inodes have different sizes). - -2. USING SQUASHFS ------------------ - -As squashfs is a read-only filesystem, the mksquashfs program must be used to -create populated squashfs filesystems. This and other squashfs utilities -can be obtained from http://www.squashfs.org. Usage instructions can be -obtained from this site also. - - -3. SQUASHFS FILESYSTEM DESIGN ------------------------------ - -A squashfs filesystem consists of seven parts, packed together on a byte -alignment: - - --------------- - | superblock | - |---------------| - | datablocks | - | & fragments | - |---------------| - | inode table | - |---------------| - | directory | - | table | - |---------------| - | fragment | - | table | - |---------------| - | export | - | table | - |---------------| - | uid/gid | - | lookup table | - --------------- - -Compressed data blocks are written to the filesystem as files are read from -the source directory, and checked for duplicates. Once all file data has been -written the completed inode, directory, fragment, export and uid/gid lookup -tables are written. - -3.1 Inodes ----------- - -Metadata (inodes and directories) are compressed in 8Kbyte blocks. Each -compressed block is prefixed by a two byte length, the top bit is set if the -block is uncompressed. A block will be uncompressed if the -noI option is set, -or if the compressed block was larger than the uncompressed block. - -Inodes are packed into the metadata blocks, and are not aligned to block -boundaries, therefore inodes overlap compressed blocks. Inodes are identified -by a 48-bit number which encodes the location of the compressed metadata block -containing the inode, and the byte offset into that block where the inode is -placed (). - -To maximise compression there are different inodes for each file type -(regular file, directory, device, etc.), the inode contents and length -varying with the type. - -To further maximise compression, two types of regular file inode and -directory inode are defined: inodes optimised for frequently occurring -regular files and directories, and extended types where extra -information has to be stored. - -3.2 Directories ---------------- - -Like inodes, directories are packed into compressed metadata blocks, stored -in a directory table. Directories are accessed using the start address of -the metablock containing the directory and the offset into the -decompressed block (). - -Directories are organised in a slightly complex way, and are not simply -a list of file names. The organisation takes advantage of the -fact that (in most cases) the inodes of the files will be in the same -compressed metadata block, and therefore, can share the start block. -Directories are therefore organised in a two level list, a directory -header containing the shared start block value, and a sequence of directory -entries, each of which share the shared start block. A new directory header -is written once/if the inode start block changes. The directory -header/directory entry list is repeated as many times as necessary. - -Directories are sorted, and can contain a directory index to speed up -file lookup. Directory indexes store one entry per metablock, each entry -storing the index/filename mapping to the first directory header -in each metadata block. Directories are sorted in alphabetical order, -and at lookup the index is scanned linearly looking for the first filename -alphabetically larger than the filename being looked up. At this point the -location of the metadata block the filename is in has been found. -The general idea of the index is ensure only one metadata block needs to be -decompressed to do a lookup irrespective of the length of the directory. -This scheme has the advantage that it doesn't require extra memory overhead -and doesn't require much extra storage on disk. - -3.3 File data -------------- - -Regular files consist of a sequence of contiguous compressed blocks, and/or a -compressed fragment block (tail-end packed block). The compressed size -of each datablock is stored in a block list contained within the -file inode. - -To speed up access to datablocks when reading 'large' files (256 Mbytes or -larger), the code implements an index cache that caches the mapping from -block index to datablock location on disk. - -The index cache allows Squashfs to handle large files (up to 1.75 TiB) while -retaining a simple and space-efficient block list on disk. The cache -is split into slots, caching up to eight 224 GiB files (128 KiB blocks). -Larger files use multiple slots, with 1.75 TiB files using all 8 slots. -The index cache is designed to be memory efficient, and by default uses -16 KiB. - -3.4 Fragment lookup table -------------------------- - -Regular files can contain a fragment index which is mapped to a fragment -location on disk and compressed size using a fragment lookup table. This -fragment lookup table is itself stored compressed into metadata blocks. -A second index table is used to locate these. This second index table for -speed of access (and because it is small) is read at mount time and cached -in memory. - -3.5 Uid/gid lookup table ------------------------- - -For space efficiency regular files store uid and gid indexes, which are -converted to 32-bit uids/gids using an id look up table. This table is -stored compressed into metadata blocks. A second index table is used to -locate these. This second index table for speed of access (and because it -is small) is read at mount time and cached in memory. - -3.6 Export table ----------------- - -To enable Squashfs filesystems to be exportable (via NFS etc.) filesystems -can optionally (disabled with the -no-exports Mksquashfs option) contain -an inode number to inode disk location lookup table. This is required to -enable Squashfs to map inode numbers passed in filehandles to the inode -location on disk, which is necessary when the export code reinstantiates -expired/flushed inodes. - -This table is stored compressed into metadata blocks. A second index table is -used to locate these. This second index table for speed of access (and because -it is small) is read at mount time and cached in memory. - - -4. TODOS AND OUTSTANDING ISSUES -------------------------------- - -4.1 Todo list -------------- - -Implement Xattr and ACL support. The Squashfs 4.0 filesystem layout has hooks -for these but the code has not been written. Once the code has been written -the existing layout should not require modification. - -4.2 Squashfs internal cache ---------------------------- - -Blocks in Squashfs are compressed. To avoid repeatedly decompressing -recently accessed data Squashfs uses two small metadata and fragment caches. - -The cache is not used for file datablocks, these are decompressed and cached in -the page-cache in the normal way. The cache is used to temporarily cache -fragment and metadata blocks which have been read as a result of a metadata -(i.e. inode or directory) or fragment access. Because metadata and fragments -are packed together into blocks (to gain greater compression) the read of a -particular piece of metadata or fragment will retrieve other metadata/fragments -which have been packed with it, these because of locality-of-reference may be -read in the near future. Temporarily caching them ensures they are available -for near future access without requiring an additional read and decompress. - -In the future this internal cache may be replaced with an implementation which -uses the kernel page cache. Because the page cache operates on page sized -units this may introduce additional complexity in terms of locking and -associated race conditions. diff --git a/trunk/Documentation/filesystems/vfs.txt b/trunk/Documentation/filesystems/vfs.txt index deeeed0faa8f..ef19afa186a9 100644 --- a/trunk/Documentation/filesystems/vfs.txt +++ b/trunk/Documentation/filesystems/vfs.txt @@ -210,8 +210,8 @@ struct super_operations { void (*put_super) (struct super_block *); void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); - int (*freeze_fs) (struct super_block *); - int (*unfreeze_fs) (struct super_block *); + void (*write_super_lockfs) (struct super_block *); + void (*unlockfs) (struct super_block *); int (*statfs) (struct dentry *, struct kstatfs *); int (*remount_fs) (struct super_block *, int *, char *); void (*clear_inode) (struct inode *); @@ -270,11 +270,11 @@ or bottom half). a superblock. The second parameter indicates whether the method should wait until the write out has been completed. Optional. - freeze_fs: called when VFS is locking a filesystem and + write_super_lockfs: called when VFS is locking a filesystem and forcing it into a consistent state. This method is currently used by the Logical Volume Manager (LVM). - unfreeze_fs: called when VFS is unlocking a filesystem and making it writable + unlockfs: called when VFS is unlocking a filesystem and making it writable again. statfs: called when the VFS needs to get filesystem statistics. This diff --git a/trunk/Documentation/hwmon/abituguru-datasheet b/trunk/Documentation/hwmon/abituguru-datasheet index d9251efdcec7..aef5a9b36846 100644 --- a/trunk/Documentation/hwmon/abituguru-datasheet +++ b/trunk/Documentation/hwmon/abituguru-datasheet @@ -74,7 +74,7 @@ a sensor. Notice that some banks have both a read and a write address this is how the uGuru determines if a read from or a write to the bank is taking place, thus when reading you should always use the read address and when writing the -write address. The write address is always one (1) more than the read address. +write address. The write address is always one (1) more then the read address. uGuru ready @@ -121,7 +121,7 @@ Once all bytes have been read data will hold 0x09, but there is no reason to test for this. Notice that the number of bytes is bank address dependent see above and below. -After completing a successful read it is advised to put the uGuru back in +After completing a successfull read it is advised to put the uGuru back in ready mode, so that it is ready for the next read / write cycle. This way if your program / driver is unloaded and later loaded again the detection algorithm described above will still work. @@ -141,7 +141,7 @@ don't ask why this is the way it is. Once DATA holds 0x01 read CMD it should hold 0xAC now. -After completing a successful write it is advised to put the uGuru back in +After completing a successfull write it is advised to put the uGuru back in ready mode, so that it is ready for the next read / write cycle. This way if your program / driver is unloaded and later loaded again the detection algorithm described above will still work. @@ -224,7 +224,7 @@ Bit 3: Beep if alarm (RW) Bit 4: 1 if alarm cause measured temp is over the warning threshold (R) Bit 5: 1 if alarm cause measured volt is over the max threshold (R) Bit 6: 1 if alarm cause measured volt is under the min threshold (R) -Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW) +Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds (RW) Temp sensor: Shutdown if temp is over the shutdown threshold (RW) * This bit is only honored/used by the uGuru if a temp sensor is connected @@ -293,7 +293,7 @@ Byte 0: Alarm behaviour for the selected sensor. A 1 enables the described behaviour. Bit 0: Give an alarm if measured rpm is under the min threshold (RW) Bit 3: Beep if alarm (RW) -Bit 7: Shutdown if alarm persist for more than 4 seconds (RW) +Bit 7: Shutdown if alarm persist for more then 4 seconds (RW) Byte 1: min threshold (scale as bank 0x26) diff --git a/trunk/Documentation/hwmon/adt7470 b/trunk/Documentation/hwmon/adt7470 index 8ce4aa0a0f55..75d13ca147cc 100644 --- a/trunk/Documentation/hwmon/adt7470 +++ b/trunk/Documentation/hwmon/adt7470 @@ -31,11 +31,15 @@ Each of the measured inputs (temperature, fan speed) has corresponding high/low limit values. The ADT7470 will signal an ALARM if any measured value exceeds either limit. -The ADT7470 samples all inputs continuously. A kernel thread is started up for -the purpose of periodically querying the temperature sensors, thus allowing the -automatic fan pwm control to set the fan speed. The driver will not read the -registers more often than once every 5 seconds. Further, configuration data is -only read once per minute. +The ADT7470 DOES NOT sample all inputs continuously. A single pin on the +ADT7470 is connected to a multitude of thermal diodes, but the chip must be +instructed explicitly to read the multitude of diodes. If you want to use +automatic fan control mode, you must manually read any of the temperature +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip +design, given that many other AD chips take care of this. The driver will not +read the registers more often than once every 5 seconds. Further, +configuration data is only read once per minute. Special Features ---------------- @@ -68,6 +72,5 @@ pwm#_auto_point2_temp. Notes ----- -The temperature inputs no longer need to be read periodically from userspace in -order for the automatic pwm algorithm to run. This was the case for earlier -versions of the driver. +As stated above, the temperature inputs must be read periodically from +userspace in order for the automatic pwm algorithm to run. diff --git a/trunk/Documentation/hwmon/adt7475 b/trunk/Documentation/hwmon/adt7475 deleted file mode 100644 index a2b1abec850e..000000000000 --- a/trunk/Documentation/hwmon/adt7475 +++ /dev/null @@ -1,87 +0,0 @@ -This describes the interface for the ADT7475 driver: - -(there are 4 fans, numbered fan1 to fan4): - -fanX_input Read the current speed of the fan (in RPMs) -fanX_min Read/write the minimum speed of the fan. Dropping - below this sets an alarm. - -(there are three PWMs, numbered pwm1 to pwm3): - -pwmX Read/write the current duty cycle of the PWM. Writes - only have effect when auto mode is turned off (see - below). Range is 0 - 255. - -pwmX_enable Fan speed control method: - - 0 - No control (fan at full speed) - 1 - Manual fan speed control (using pwm[1-*]) - 2 - Automatic fan speed control - -pwmX_auto_channels_temp Select which channels affect this PWM - - 1 - TEMP1 controls PWM - 2 - TEMP2 controls PWM - 4 - TEMP3 controls PWM - 6 - TEMP2 and TEMP3 control PWM - 7 - All three inputs control PWM - -pwmX_freq Read/write the PWM frequency in Hz. The number - should be one of the following: - - 11 Hz - 14 Hz - 22 Hz - 29 Hz - 35 Hz - 44 Hz - 58 Hz - 88 Hz - -pwmX_auto_point1_pwm Read/write the minimum PWM duty cycle in automatic mode - -pwmX_auto_point2_pwm Read/write the maximum PWM duty cycle in automatic mode - -(there are three temperature settings numbered temp1 to temp3): - -tempX_input Read the current temperature. The value is in milli - degrees of Celsius. - -tempX_max Read/write the upper temperature limit - exceeding this - will cause an alarm. - -tempX_min Read/write the lower temperature limit - exceeding this - will cause an alarm. - -tempX_offset Read/write the temperature adjustment offset - -tempX_crit Read/write the THERM limit for remote1. - -tempX_crit_hyst Set the temperature value below crit where the - fans will stay on - this helps drive the temperature - low enough so it doesn't stay near the edge and - cause THERM to keep tripping. - -tempX_auto_point1_temp Read/write the minimum temperature where the fans will - turn on in automatic mode. - -tempX_auto_point2_temp Read/write the maximum temperature over which the fans - will run in automatic mode. tempX_auto_point1_temp - and tempX_auto_point2_temp together define the - range of automatic control. - -tempX_alarm Read a 1 if the max/min alarm is set -tempX_fault Read a 1 if either temp1 or temp3 diode has a fault - -(There are two voltage settings, in1 and in2): - -inX_input Read the current voltage on VCC. Value is in - millivolts. - -inX_min read/write the minimum voltage limit. - Dropping below this causes an alarm. - -inX_max read/write the maximum voltage limit. - Exceeding this causes an alarm. - -inX_alarm Read a 1 if the max/min alarm is set. diff --git a/trunk/Documentation/hwmon/f71882fg b/trunk/Documentation/hwmon/f71882fg deleted file mode 100644 index a8321267b5b6..000000000000 --- a/trunk/Documentation/hwmon/f71882fg +++ /dev/null @@ -1,89 +0,0 @@ -Kernel driver f71882fg -====================== - -Supported chips: - * Fintek F71882FG and F71883FG - Prefix: 'f71882fg' - Addresses scanned: none, address read from Super I/O config space - Datasheet: Available from the Fintek website - * Fintek F71862FG and F71863FG - Prefix: 'f71862fg' - Addresses scanned: none, address read from Super I/O config space - Datasheet: Available from the Fintek website - * Fintek F8000 - Prefix: 'f8000' - Addresses scanned: none, address read from Super I/O config space - Datasheet: Not public - -Author: Hans de Goede - - -Description ------------ - -Fintek F718xxFG/F8000 Super I/O chips include complete hardware monitoring -capabilities. They can monitor up to 9 voltages (3 for the F8000), 4 fans and -3 temperature sensors. - -These chips also have fan controlling features, using either DC or PWM, in -three different modes (one manual, two automatic). - -The driver assumes that no more than one chip is present, which seems -reasonable. - - -Monitoring ----------- - -The Voltage, Fan and Temperature Monitoring uses the standard sysfs -interface as documented in sysfs-interface, without any exceptions. - - -Fan Control ------------ - -Both PWM (pulse-width modulation) and DC fan speed control methods are -supported. The right one to use depends on external circuitry on the -motherboard, so the driver assumes that the BIOS set the method -properly. - -There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC -voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM -mode where the actual RPM of the fan (as measured) is controlled and the speed -gets specified as 0-100% of the fan#_full_speed file. - -Since both modes work in a 0-100% (mapped to 0-255) scale, there isn't a -whole lot of a difference when modifying fan control settings. The only -important difference is that in RPM mode the 0-100% controls the fan speed -between 0-100% of fan#_full_speed. It is assumed that if the BIOS programs -RPM mode, it will also set fan#_full_speed properly, if it does not then -fan control will not work properly, unless you set a sane fan#_full_speed -value yourself. - -Switching between these modes requires re-initializing a whole bunch of -registers, so the mode which the BIOS has set is kept. The mode is -printed when loading the driver. - -Three different fan control modes are supported; the mode number is written -to the pwm#_enable file. Note that not all modes are supported on all -chips, and some modes may only be available in RPM / PWM mode on the F8000. -Writing an unsupported mode will result in an invalid parameter error. - -* 1: Manual mode - You ask for a specific PWM duty cycle / DC voltage or a specific % of - fan#_full_speed by writing to the pwm# file. This mode is only - available on the F8000 if the fan channel is in RPM mode. - -* 2: Normal auto mode - You can define a number of temperature/fan speed trip points, which % the - fan should run at at this temp and which temp a fan should follow using the - standard sysfs interface. The number and type of trip points is chip - depended, see which files are available in sysfs. - Fan/PWM channel 3 of the F8000 is always in this mode! - -* 3: Thermostat mode (Only available on the F8000 when in duty cycle mode) - The fan speed is regulated to keep the temp the fan is mapped to between - temp#_auto_point2_temp and temp#_auto_point3_temp. - -Both of the automatic modes require that pwm1 corresponds to fan1, pwm2 to -fan2 and pwm3 to fan3. diff --git a/trunk/Documentation/hwmon/it87 b/trunk/Documentation/hwmon/it87 index 659315d98e00..042c0415140b 100644 --- a/trunk/Documentation/hwmon/it87 +++ b/trunk/Documentation/hwmon/it87 @@ -26,10 +26,6 @@ Supported chips: Datasheet: Publicly available at the ITE website http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip - * IT8720F - Prefix: 'it8720' - Addresses scanned: from Super I/O config space (8 I/O ports) - Datasheet: Not yet publicly available. * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -75,7 +71,7 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8720F, IT8726F and SiS950 chips. +IT8718F, IT8726F and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -88,19 +84,19 @@ the IT8716F and late IT8712F have 6. They are shared with other functions though, so the functionality may not be available on a given system. The driver dumbly assume it is there. -The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value -is stored in the Super-I/O configuration space. Due to technical limitations, +The IT8718F also features VID inputs (up to 8 pins) but the value is +stored in the Super-I/O configuration space. Due to technical limitations, this value can currently only be read once at initialization time, so the driver won't notice and report changes in the VID value. The two upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. -The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for +The IT8716F, IT8718F and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have -optional 16-bit tachometer counters for fans 1 to 3. This is better (no more -fan clock divider mess) but not compatible with the older chips and +The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional +16-bit tachometer counters for fans 1 to 3. This is better (no more fan +clock divider mess) but not compatible with the older chips and revisions. The 16-bit tachometer mode is enabled by the driver when one of the above chips is detected. @@ -126,7 +122,7 @@ zero'; this is important for negative voltage measurements. All voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution of 0.016 volt. The battery voltage in8 does not have limit registers. -The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: +The VID lines (IT8712F/IT8716F/IT8718F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by the mainboard and/or processor itself. It is a value in volts. diff --git a/trunk/Documentation/hwmon/lis3lv02d b/trunk/Documentation/hwmon/lis3lv02d index 0fcfc4a7ccdc..65dfb0c0fd67 100644 --- a/trunk/Documentation/hwmon/lis3lv02d +++ b/trunk/Documentation/hwmon/lis3lv02d @@ -13,21 +13,18 @@ Author: Description ----------- -This driver provides support for the accelerometer found in various HP -laptops sporting the feature officially called "HP Mobile Data -Protection System 3D" or "HP 3D DriveGuard". It detect automatically -laptops with this sensor. Known models (for now the HP 2133, nc6420, -nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis -automatically oriented on standard way (eg: you can directly play -neverball). The accelerometer data is readable via +This driver provides support for the accelerometer found in various HP laptops +sporting the feature officially called "HP Mobile Data Protection System 3D" or +"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models +(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will +have their axis automatically oriented on standard way (eg: you can directly +play neverball). The accelerometer data is readable via /sys/devices/platform/lis3lv02d. Sysfs attributes under /sys/devices/platform/lis3lv02d/: position - 3D position that the accelerometer reports. Format: "(x,y,z)" -calibrate - read: values (x, y, z) that are used as the base for input - class device operation. - write: forces the base to be recalibrated with the current - position. +calibrate - read: values (x, y, z) that are used as the base for input class device operation. + write: forces the base to be recalibrated with the current position. rate - reports the sampling rate of the accelerometer device in HZ This driver also provides an absolute input class device, allowing @@ -42,12 +39,11 @@ the accelerometer are converted into a "standard" organisation of the axes * When the laptop is horizontal the position reported is about 0 for X and Y and a positive value for Z * If the left side is elevated, X increases (becomes positive) - * If the front side (where the touchpad is) is elevated, Y decreases - (becomes negative) + * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) * If the laptop is put upside-down, Z becomes negative -If your laptop model is not recognized (cf "dmesg"), you can send an -email to the authors to add it to the database. When reporting a new -laptop, please include the output of "dmidecode" plus the value of -/sys/devices/platform/lis3lv02d/position in these four cases. +If your laptop model is not recognized (cf "dmesg"), you can send an email to the +authors to add it to the database. When reporting a new laptop, please include +the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position +in these four cases. diff --git a/trunk/Documentation/hwmon/lm70 b/trunk/Documentation/hwmon/lm70 index 0d240291e3cc..2bdd3feebf53 100644 --- a/trunk/Documentation/hwmon/lm70 +++ b/trunk/Documentation/hwmon/lm70 @@ -1,11 +1,9 @@ Kernel driver lm70 ================== -Supported chips: +Supported chip: * National Semiconductor LM70 Datasheet: http://www.national.com/pf/LM/LM70.html - * Texas Instruments TMP121/TMP123 - Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html Author: Kaiwan N Billimoria @@ -27,14 +25,6 @@ complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. -As a real (in-tree) example of this "SPI protocol driver" interfacing -with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c -and its associated documentation. - -The TMP121/TMP123 are very similar; main differences are 4 wire SPI inter- -face (read only) and 13-bit temperature data (0.0625 degrees celsius reso- -lution). - Thanks to --------- Jean Delvare for mentoring the hwmon-side driver diff --git a/trunk/Documentation/hwmon/lm85 b/trunk/Documentation/hwmon/lm85 index a13680871bc7..400620741290 100644 --- a/trunk/Documentation/hwmon/lm85 +++ b/trunk/Documentation/hwmon/lm85 @@ -164,7 +164,7 @@ configured individually according to the following options. temperature. (PWM value from 0 to 255) * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the behaviour of fans. Write 1 to let fans spinning at + the bahaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. NOTE: It has been reported that there is a bug in the LM85 that causes the flag diff --git a/trunk/Documentation/hwmon/ltc4245 b/trunk/Documentation/hwmon/ltc4245 deleted file mode 100644 index bae7a3adc5d8..000000000000 --- a/trunk/Documentation/hwmon/ltc4245 +++ /dev/null @@ -1,81 +0,0 @@ -Kernel driver ltc4245 -===================== - -Supported chips: - * Linear Technology LTC4245 - Prefix: 'ltc4245' - Addresses scanned: 0x20-0x3f - Datasheet: - http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 - -Author: Ira W. Snyder - - -Description ------------ - -The LTC4245 controller allows a board to be safely inserted and removed -from a live backplane in multiple supply systems such as CompactPCI and -PCI Express. - - -Usage Notes ------------ - -This driver does not probe for LTC4245 devices, due to the fact that some -of the possible addresses are unfriendly to probing. You will need to use -the "force" parameter to tell the driver where to find the device. - -Example: the following will load the driver for an LTC4245 at address 0x23 -on I2C bus #1: -$ modprobe ltc4245 force=1,0x23 - - -Sysfs entries -------------- - -The LTC4245 has built-in limits for over and under current warnings. This -makes it very likely that the reference circuit will be used. - -This driver uses the values in the datasheet to change the register values -into the values specified in the sysfs-interface document. The current readings -rely on the sense resistors listed in Table 2: "Sense Resistor Values". - -in1_input 12v input voltage (mV) -in2_input 5v input voltage (mV) -in3_input 3v input voltage (mV) -in4_input Vee (-12v) input voltage (mV) - -in1_min_alarm 12v input undervoltage alarm -in2_min_alarm 5v input undervoltage alarm -in3_min_alarm 3v input undervoltage alarm -in4_min_alarm Vee (-12v) input undervoltage alarm - -curr1_input 12v current (mA) -curr2_input 5v current (mA) -curr3_input 3v current (mA) -curr4_input Vee (-12v) current (mA) - -curr1_max_alarm 12v overcurrent alarm -curr2_max_alarm 5v overcurrent alarm -curr3_max_alarm 3v overcurrent alarm -curr4_max_alarm Vee (-12v) overcurrent alarm - -in5_input 12v output voltage (mV) -in6_input 5v output voltage (mV) -in7_input 3v output voltage (mV) -in8_input Vee (-12v) output voltage (mV) - -in5_min_alarm 12v output undervoltage alarm -in6_min_alarm 5v output undervoltage alarm -in7_min_alarm 3v output undervoltage alarm -in8_min_alarm Vee (-12v) output undervoltage alarm - -in9_input GPIO #1 voltage data -in10_input GPIO #2 voltage data -in11_input GPIO #3 voltage data - -power1_input 12v power usage (mW) -power2_input 5v power usage (mW) -power3_input 3v power usage (mW) -power4_input Vee (-12v) power usage (mW) diff --git a/trunk/Documentation/ide/warm-plug-howto.txt b/trunk/Documentation/ide/warm-plug-howto.txt index 98152bcd515a..d5885468b072 100644 --- a/trunk/Documentation/ide/warm-plug-howto.txt +++ b/trunk/Documentation/ide/warm-plug-howto.txt @@ -11,8 +11,3 @@ unplug old device(s) and plug new device(s) # echo -n "1" > /sys/class/ide_port/idex/scan done - -NOTE: please make sure that partitions are unmounted and that there are -no other active references to devices before doing "delete_devices" step, -also do not attempt "scan" step on devices currently in use -- otherwise -results may be unpredictable and lead to data loss if you're unlucky diff --git a/trunk/Documentation/input/walkera0701.txt b/trunk/Documentation/input/walkera0701.txt deleted file mode 100644 index 8f4289efc5c4..000000000000 --- a/trunk/Documentation/input/walkera0701.txt +++ /dev/null @@ -1,109 +0,0 @@ - -Walkera WK-0701 transmitter is supplied with a ready to fly Walkera -helicopters such as HM36, HM37, HM60. The walkera0701 module enables to use -this transmitter as joystick - -Devel homepage and download: -http://zub.fei.tuke.sk/walkera-wk0701/ - -or use cogito: -cg-clone http://zub.fei.tuke.sk/GIT/walkera0701-joystick - - -Connecting to PC: - -At back side of transmitter S-video connector can be found. Modulation -pulses from processor to HF part can be found at pin 2 of this connector, -pin 3 is GND. Between pin 3 and CPU 5k6 resistor can be found. To get -modulation pulses to PC, signal pulses must be amplified. - -Cable: (walkera TX to parport) - -Walkera WK-0701 TX S-VIDEO connector: - (back side of TX) - __ __ S-video: canon25 - / |_| \ pin 2 (signal) NPN parport - / O 4 3 O \ pin 3 (GND) LED ________________ 10 ACK - ( O 2 1 O ) | C - \ ___ / 2 ________________________|\|_____|/ - | [___] | |/| B |\ - ------- 3 __________________________________|________________ 25 GND - E - - -I use green LED and BC109 NPN transistor. - -Software: - -Build kernel with walkera0701 module. Module walkera0701 need exclusive -access to parport, modules like lp must be unloaded before loading -walkera0701 module, check dmesg for error messages. Connect TX to PC by -cable and run jstest /dev/input/js0 to see values from TX. If no value can -be changed by TX "joystick", check output from /proc/interrupts. Value for -(usually irq7) parport must increase if TX is on. - - - -Technical details: - -Driver use interrupt from parport ACK input bit to measure pulse length -using hrtimers. - -Frame format: -Based on walkera WK-0701 PCM Format description by Shaul Eizikovich. -(downloaded from http://www.smartpropoplus.com/Docs/Walkera_Wk-0701_PCM.pdf) - -Signal pulses: - (ANALOG) - SYNC BIN OCT - +---------+ +------+ - | | | | ---+ +------+ +--- - -Frame: - SYNC , BIN1, OCT1, BIN2, OCT2 ... BIN24, OCT24, BIN25, next frame SYNC .. - -pulse length: - Binary values: Analog octal values: - - 288 uS Binary 0 318 uS 000 - 438 uS Binary 1 398 uS 001 - 478 uS 010 - 558 uS 011 - 638 uS 100 - 1306 uS SYNC 718 uS 101 - 798 uS 110 - 878 uS 111 - -24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits - -(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync -to bin change or octal value to bin change). - -Binary data representations: - -One binary and octal value can be grouped to nibble. 24 nibbles + one binary -values can be sampled between sync pulses. - -Values for first four channels (analog joystick values) can be found in -first 10 nibbles. Analog value is represented by one sign bit and 9 bit -absolute binary value. (10 bits per channel). Next nibble is checksum for -first ten nibbles. - -Next nibbles 12 .. 21 represents four channels (not all channels can be -directly controlled from TX). Binary representations ar the same as in first -four channels. In nibbles 22 and 23 is a special magic number. Nibble 24 is -checksum for nibbles 12..23. - -After last octal value for nibble 24 and next sync pulse one additional -binary value can be sampled. This bit and magic number is not used in -software driver. Some details about this magic numbers can be found in -Walkera_Wk-0701_PCM.pdf. - -Checksum calculation: - -Summary of octal values in nibbles must be same as octal value in checksum -nibble (only first 3 bits are used). Binary value for checksum nibble is -calculated by sum of binary values in checked nibbles + sum of octal values -in checked nibbles divided by 8. Only bit 0 of this sum is used. - diff --git a/trunk/Documentation/ioctl/ioctl-number.txt b/trunk/Documentation/ioctl/ioctl-number.txt index f1d639903325..824699174436 100644 --- a/trunk/Documentation/ioctl/ioctl-number.txt +++ b/trunk/Documentation/ioctl/ioctl-number.txt @@ -84,7 +84,7 @@ Code Seq# Include File Comments 'B' C0-FF advanced bbus 'C' all linux/soundcard.h -'D' all arch/s390/include/asm/dasd.h +'D' all asm-s390/dasd.h 'E' all linux/input.h 'F' all linux/fb.h 'H' all linux/hiddev.h @@ -105,7 +105,7 @@ Code Seq# Include File Comments 'S' 80-81 scsi/scsi_ioctl.h conflict! 'S' 82-FF scsi/scsi.h conflict! 'T' all linux/soundcard.h conflict! -'T' all arch/x86/include/asm/ioctls.h conflict! +'T' all asm-i386/ioctls.h conflict! 'U' 00-EF linux/drivers/usb/usb.h 'V' all linux/vt.h 'W' 00-1F linux/watchdog.h conflict! @@ -120,7 +120,7 @@ Code Seq# Include File Comments 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! -'c' 80-9F arch/s390/include/asm/chsc.h +'c' 80-9F asm-s390/chsc.h 'd' 00-FF linux/char/drm/drm/h conflict! 'd' 00-DF linux/video_decoder.h conflict! 'd' F0-FF linux/digi1.h @@ -170,7 +170,7 @@ Code Seq# Include File Comments 0x80 00-1F linux/fb.h 0x81 00-1F linux/videotext.h -0x89 00-06 arch/x86/include/asm/sockios.h +0x89 00-06 asm-i386/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range 0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range diff --git a/trunk/Documentation/ja_JP/stable_kernel_rules.txt b/trunk/Documentation/ja_JP/stable_kernel_rules.txt index 14265837c4ce..b3ffe870de33 100644 --- a/trunk/Documentation/ja_JP/stable_kernel_rules.txt +++ b/trunk/Documentation/ja_JP/stable_kernel_rules.txt @@ -12,11 +12,11 @@ file at first. ================================== ã“ã‚Œã¯ã€ -linux-2.6.29/Documentation/stable_kernel_rules.txt +linux-2.6.24/Documentation/stable_kernel_rules.txt ã®å’Œè¨³ã§ã™ã€‚ 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ > -翻訳日： 2009/1/14 +翻訳日： 2007/12/30 翻訳者： Tsugikazu Shibata 校正者： 武井伸光ã•ã‚“〠ã‹ã­ã“ã•ã‚“ (Seiji Kaneko) @@ -38,15 +38,12 @@ linux-2.6.29/Documentation/stable_kernel_rules.txt - ビルドエラー(CONFIG_BROKENã«ãªã£ã¦ã„ã‚‹ã‚‚ã®ã‚’除ã), oops, ãƒãƒ³ã‚°ã€ãƒ‡ãƒ¼ タ破壊ã€ç¾å®Ÿã®ã‚»ã‚­ãƒ¥ãƒªãƒ†ã‚£å•é¡Œã€ãã®ä»– "ã‚ã‚ã€ã“ã‚Œã¯ãƒ€ãƒ¡ã ã­"ã¨ã„ㆠよã†ãªã‚‚ã®ã‚’修正ã—ãªã‘ã‚Œã°ãªã‚‰ãªã„。短ã言ãˆã°ã€é‡å¤§ãªå•é¡Œã€‚ - - æ–°ã—ã„ device ID ã¨ã‚¯ã‚ªãƒ¼ã‚¯ã‚‚å—ã‘入れられる。 - ã©ã®ã‚ˆã†ã«ç«¶åˆçŠ¶æ…‹ãŒç™ºç”Ÿã™ã‚‹ã‹ã®èª¬æ˜Žã‚‚一緒ã«æ›¸ã‹ã‚Œã¦ã„ãªã„é™ã‚Šã€ "ç†è«–çš„ã«ã¯ç«¶åˆçŠ¶æ…‹ã«ãªã‚‹"よã†ãªã‚‚ã®ã¯ä¸å¯ã€‚ - ã„ã‹ãªã‚‹äº›ç´°ãªä¿®æ­£ã‚‚å«ã‚ã‚‹ã“ã¨ã¯ã§ããªã„。(スペルã®ä¿®æ­£ã€ç©ºç™½ã®ã‚¯ãƒªãƒ¼ ンアップãªã©) + - 対応ã™ã‚‹ã‚µãƒ–システムメンテナãŒå—ã‘入れãŸã‚‚ã®ã§ãªã‘ã‚Œã°ãªã‚‰ãªã„。 - Documentation/SubmittingPatches ã®è¦å‰‡ã«å¾“ã£ãŸã‚‚ã®ã§ãªã‘ã‚Œã°ãªã‚‰ãªã„。 - - パッãƒè‡ªä½“ã‹åŒç­‰ã®ä¿®æ­£ãŒ Linus ã®ãƒ„リーã«æ—¢ã«å­˜åœ¨ã—ãªã‘ã‚Œã°ãªã‚‰ãªã„。 -　 Linus ã®ãƒ„リーã§ã®ã‚³ãƒŸãƒƒãƒˆID ã‚’ -stable ã¸ã®ãƒ‘ッãƒæŠ•ç¨¿ã®éš›ã«å¼•ç”¨ã™ - ã‚‹ã“ã¨ã€‚ -stable ツリーã«ãƒ‘ッãƒã‚’é€ä»˜ã™ã‚‹æ‰‹ç¶šã- @@ -55,10 +52,8 @@ linux-2.6.29/Documentation/stable_kernel_rules.txt - é€ä¿¡è€…ã¯ãƒ‘ッãƒãŒã‚­ãƒ¥ãƒ¼ã«å—ã‘付ã‘られãŸéš›ã«ã¯ ACK ã‚’ã€å´ä¸‹ã•ã‚ŒãŸå ´åˆ ã«ã¯ NAK ã‚’å—ã‘å–る。ã“ã®åå¿œã¯é–‹ç™ºè€…ãŸã¡ã®ã‚¹ã‚±ã‚¸ãƒ¥ãƒ¼ãƒ«ã«ã‚ˆã£ã¦ã€æ•° æ—¥ã‹ã‹ã‚‹å ´åˆãŒã‚る。 - - ã‚‚ã—å—ã‘å–られãŸã‚‰ã€ãƒ‘ッãƒã¯ä»–ã®é–‹ç™ºè€…ãŸã¡ã¨é–¢é€£ã™ã‚‹ã‚µãƒ–システム㮠- メンテナーã«ã‚ˆã‚‹ãƒ¬ãƒ“ューã®ãŸã‚ã« -stable キューã«è¿½åŠ ã•ã‚Œã‚‹ã€‚ - - パッãƒã« stable@kernel.org ã®ã‚¢ãƒ‰ãƒ¬ã‚¹ãŒä»˜åŠ ã•ã‚Œã¦ã„ã‚‹ã¨ãã«ã¯ã€ãã‚Œ - ㌠Linus ã®ãƒ„リーã«å…¥ã‚‹æ™‚ã«è‡ªå‹•çš„ã« stable ãƒãƒ¼ãƒ ã« email ã•ã‚Œã‚‹ã€‚ + - ã‚‚ã—å—ã‘å–られãŸã‚‰ã€ãƒ‘ッãƒã¯ä»–ã®é–‹ç™ºè€…ãŸã¡ã®ãƒ¬ãƒ“ューã®ãŸã‚ã« + -stable キューã«è¿½åŠ ã•ã‚Œã‚‹ã€‚ - セキュリティパッãƒã¯ã“ã®ã‚¨ã‚¤ãƒªã‚¢ã‚¹ (stable@kernel.org) ã«é€ã‚‰ã‚Œã‚‹ã¹ ãã§ã¯ãªãã€ä»£ã‚ã‚Šã« security@kernel.org ã®ã‚¢ãƒ‰ãƒ¬ã‚¹ã«é€ã‚‰ã‚Œã‚‹ã€‚ diff --git a/trunk/Documentation/kbuild/kbuild.txt b/trunk/Documentation/kbuild/kbuild.txt index f3355b6812df..51771847e816 100644 --- a/trunk/Documentation/kbuild/kbuild.txt +++ b/trunk/Documentation/kbuild/kbuild.txt @@ -3,7 +3,7 @@ Environment variables KCPPFLAGS -------------------------------------------------- Additional options to pass when preprocessing. The preprocessing options -will be used in all cases where kbuild does preprocessing including +will be used in all cases where kbuild do preprocessing including building C files and assembler files. KAFLAGS @@ -16,7 +16,7 @@ Additional options to the C compiler. KBUILD_VERBOSE -------------------------------------------------- -Set the kbuild verbosity. Can be assigned same values as "V=...". +Set the kbuild verbosity. Can be assinged same values as "V=...". See make help for the full list. Setting "V=..." takes precedence over KBUILD_VERBOSE. @@ -35,14 +35,14 @@ KBUILD_OUTPUT -------------------------------------------------- Specify the output directory when building the kernel. The output directory can also be specificed using "O=...". -Setting "O=..." takes precedence over KBUILD_OUTPUT. +Setting "O=..." takes precedence over KBUILD_OUTPUT ARCH -------------------------------------------------- Set ARCH to the architecture to be built. In most cases the name of the architecture is the same as the directory name found in the arch/ directory. -But some architectures such as x86 and sparc have aliases. +But some architectures suach as x86 and sparc has aliases. x86: i386 for 32 bit, x86_64 for 64 bit sparc: sparc for 32 bit, sparc64 for 64 bit @@ -63,7 +63,7 @@ CF is often used on the command-line like this: INSTALL_PATH -------------------------------------------------- INSTALL_PATH specifies where to place the updated kernel and system map -images. Default is /boot, but you can set it to other values. +images. Default is /boot, but you can set it to other values MODLIB @@ -90,7 +90,7 @@ INSTALL_MOD_STRIP will used as the options to the strip command. INSTALL_FW_PATH -------------------------------------------------- -INSTALL_FW_PATH specifies where to install the firmware blobs. +INSTALL_FW_PATH specify where to install the firmware blobs. The default value is: $(INSTALL_MOD_PATH)/lib/firmware @@ -99,7 +99,7 @@ The value can be overridden in which case the default value is ignored. INSTALL_HDR_PATH -------------------------------------------------- -INSTALL_HDR_PATH specifies where to install user space headers when +INSTALL_HDR_PATH specify where to install user space headers when executing "make headers_*". The default value is: @@ -112,23 +112,15 @@ The value can be overridden in which case the default value is ignored. KBUILD_MODPOST_WARN -------------------------------------------------- -KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined -symbols in the final module linking stage. It changes such errors -into warnings. +KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined +symbols in the final module linking stage. -KBUILD_MODPOST_NOFINAL +KBUILD_MODPOST_FINAL -------------------------------------------------- KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. -This is solely useful to speed up test compiles. +This is solely usefull to speed up test compiles. KBUILD_EXTRA_SYMBOLS -------------------------------------------------- -For modules that use symbols from other modules. +For modules use symbols from another modules. See more details in modules.txt. - -ALLSOURCE_ARCHS --------------------------------------------------- -For tags/TAGS/cscope targets, you can specify more than one arch -to be included in the databases, separated by blank space. E.g.: - - $ make ALLSOURCE_ARCHS="x86 mips arm" tags diff --git a/trunk/Documentation/kbuild/modules.txt b/trunk/Documentation/kbuild/modules.txt index b1096da953c8..1821c077b435 100644 --- a/trunk/Documentation/kbuild/modules.txt +++ b/trunk/Documentation/kbuild/modules.txt @@ -253,7 +253,7 @@ following files: # Module specific targets genbin: - echo "X" > 8123_bin.o_shipped + echo "X" > 8123_bin_shipped In example 2, we are down to two fairly simple files and for simple @@ -279,7 +279,7 @@ following files: # Module specific targets genbin: - echo "X" > 8123_bin.o_shipped + echo "X" > 8123_bin_shipped endif diff --git a/trunk/Documentation/kernel-doc-nano-HOWTO.txt b/trunk/Documentation/kernel-doc-nano-HOWTO.txt index d73fbd2b2b45..c6841eee9598 100644 --- a/trunk/Documentation/kernel-doc-nano-HOWTO.txt +++ b/trunk/Documentation/kernel-doc-nano-HOWTO.txt @@ -71,11 +71,6 @@ The @argument descriptions must begin on the very next line following this opening short function description line, with no intervening empty comment lines. -If a function parameter is "..." (varargs), it should be listed in -kernel-doc notation as: - * @...: description - - Example kernel-doc data structure comment. /** @@ -287,32 +282,6 @@ struct my_struct { }; -Including documentation blocks in source files ----------------------------------------------- - -To facilitate having source code and comments close together, you can -include kernel-doc documentation blocks that are free-form comments -instead of being kernel-doc for functions, structures, unions, -enums, or typedefs. This could be used for something like a -theory of operation for a driver or library code, for example. - -This is done by using a DOC: section keyword with a section title. E.g.: - -/** - * DOC: Theory of Operation - * - * The whizbang foobar is a dilly of a gizmo. It can do whatever you - * want it to do, at any time. It reads your mind. Here's how it works. - * - * foo bar splat - * - * The only drawback to this gizmo is that is can sometimes damage - * hardware, software, or its subject(s). - */ - -DOC: sections are used in SGML templates files as indicated below. - - How to make new SGML template files ----------------------------------- @@ -333,9 +302,6 @@ exported using EXPORT_SYMBOL. !F is replaced by the documentation, in , for the functions listed. -!P
is replaced by the contents of the DOC: -section titled
from . -Spaces are allowed in
; do not quote the
. Tim. */ diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index d8362cf9909e..a2d8805c03d5 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -91,7 +91,6 @@ parameter is applicable: SUSPEND System suspend states are enabled. FTRACE Function tracing enabled. TS Appropriate touchscreen support is enabled. - UMS USB Mass Storage support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. V4L Video For Linux support is enabled. @@ -141,7 +140,6 @@ and is between 256 and 4096 characters. It is defined in the file ht -- run only enough ACPI to enable Hyper Threading strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. - rsdt -- prefer RSDT over (default) XSDT See also Documentation/power/pm.txt, pci=noacpi @@ -152,20 +150,16 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, - old_ordering, s4_nonvs } - See Documentation/power/video.txt for information on - s3_bios and s3_mode. + Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering } + See Documentation/power/video.txt for s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep as soon as the kernel's real-mode entry point is called. s4_nohwsig prevents ACPI hardware signature from being used during resume from hibernation. old_ordering causes the ACPI 1.0 ordering of the _PTS - control method, with respect to putting devices into - low power states, to be enforced (the ACPI 2.0 ordering - of _PTS is used by default). - s4_nonvs prevents the kernel from saving/restoring the - ACPI NVS memory during hibernation. + control method, wrt putting devices into low power + states, to be enforced (the ACPI 2.0 ordering of _PTS is + used by default). acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } @@ -200,7 +194,7 @@ and is between 256 and 4096 characters. It is defined in the file acpi_skip_timer_override [HW,ACPI] Recognize and ignore IRQ0/pin2 Interrupt Override. For broken nForce2 BIOS resulting in XT-PIC timer. - acpi_use_timer_override [HW,ACPI] + acpi_use_timer_override [HW,ACPI} Use timer override. For some broken Nvidia NF5 boards that require a timer override, but don't have HPET @@ -475,8 +469,8 @@ and is between 256 and 4096 characters. It is defined in the file clearcpuid=BITNUM [X86] Disable CPUID feature X for the kernel. See - arch/x86/include/asm/cpufeature.h for the valid bit - numbers. Note the Linux specific bits are not necessarily + include/asm-x86/cpufeature.h for the valid bit numbers. + Note the Linux specific bits are not necessarily stable over kernel options, but the vendor specific ones should be. Also note that user programs calling CPUID directly @@ -557,11 +551,6 @@ and is between 256 and 4096 characters. It is defined in the file not work reliably with all consoles, but is known to work with serial and VGA consoles. - coredump_filter= - [KNL] Change the default value for - /proc//coredump_filter. - See also Documentation/filesystems/proc.txt. - cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver Format: ,,,[,] @@ -577,6 +566,9 @@ and is between 256 and 4096 characters. It is defined in the file a memory unit (amount[KMG]). See also Documentation/kdump/kdump.txt for a example. + cs4232= [HW,OSS] + Format: ,,,,, + cs89x0_dma= [HW,NET] Format: @@ -729,6 +721,10 @@ and is between 256 and 4096 characters. It is defined in the file Default value is 0. Value can be changed at runtime via /selinux/enforce. + es1371= [HW,OSS] + Format: ,[,[]] + See also header of sound/oss/es1371.c. + ether= [HW,NET] Ethernet cards parameters This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. @@ -827,8 +823,8 @@ and is between 256 and 4096 characters. It is defined in the file hlt [BUGS=ARM,SH] - hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC) - terminal devices. Valid values: 0..8 + hvc_iucv= [S390] Number of z/VM IUCV Hypervisor console (HVC) + back-ends. Valid parameters: 0..8 i8042.debug [HW] Toggle i8042 debug mode i8042.direct [HW] Put keyboard port into non-translated mode @@ -876,19 +872,17 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/ide/ide.txt. idle= [X86] - Format: idle=poll, idle=mwait, idle=halt, idle=nomwait - Poll forces a polling idle loop that can slightly - improve the performance of waking up a idle CPU, but - will use a lot of power and make the system run hot. - Not recommended. - idle=mwait: On systems which support MONITOR/MWAIT but - the kernel chose to not use it because it doesn't save - as much power as a normal idle loop, use the - MONITOR/MWAIT idle loop anyways. Performance should be - the same as idle=poll. - idle=halt: Halt is forced to be used for CPU idle. + Format: idle=poll or idle=mwait, idle=halt, idle=nomwait + Poll forces a polling idle loop that can slightly improves the performance + of waking up a idle CPU, but will use a lot of power and make the system + run hot. Not recommended. + idle=mwait. On systems which support MONITOR/MWAIT but the kernel chose + to not use it because it doesn't save as much power as a normal idle + loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same + as idle=poll. + idle=halt. Halt is forced to be used for CPU idle. In such case C2/C3 won't be used again. - idle=nomwait: Disable mwait for CPU C-states + idle=nomwait. Disable mwait for CPU C-states ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem Claim all unknown PCI IDE storage controllers. @@ -919,10 +913,6 @@ and is between 256 and 4096 characters. It is defined in the file inttest= [IA64] - iomem= Disable strict checking of access to MMIO memory - strict regions from userspace. - relaxed - iommu= [x86] off force @@ -1074,8 +1064,8 @@ and is between 256 and 4096 characters. It is defined in the file lapic [X86-32,APIC] Enable the local APIC even if BIOS disabled it. - lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer - in C2 power state. + lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in + C2 power state. libata.dma= [LIBATA] DMA control libata.dma=0 Disable all PATA and SATA DMA @@ -1127,8 +1117,6 @@ and is between 256 and 4096 characters. It is defined in the file If there are multiple matching configurations changing the same attribute, the last one is used. - lmb=debug [KNL] Enable lmb debug messages. - load_ramdisk= [RAM] List of ramdisks to load from floppy See Documentation/blockdev/ramdisk.txt. @@ -1562,9 +1550,6 @@ and is between 256 and 4096 characters. It is defined in the file nosoftlockup [KNL] Disable the soft-lockup detector. - noswapaccount [KNL] Disable accounting of swap in memory resource - controller. (See Documentation/controllers/memory.txt) - nosync [HW,M68K] Disables sync negotiation for all devices. notsc [BUGS=X86-32] Disable Time Stamp Counter @@ -1584,10 +1569,6 @@ and is between 256 and 4096 characters. It is defined in the file nr_uarts= [SERIAL] maximum number of UARTs to be registered. - ohci1394_dma=early [HW] enable debugging via the ohci1394 driver. - See Documentation/debugging-via-ohci1394.txt for more - info. - olpc_ec_timeout= [OLPC] ms delay when issuing EC commands Rather than timing out after 20 ms if an EC command is not properly ACKed, override the length @@ -1812,10 +1793,10 @@ and is between 256 and 4096 characters. It is defined in the file autoconfiguration. Ranges are in pairs (memory base and size). - dynamic_printk Enables pr_debug()/dev_dbg() calls if - CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. - These can also be switched on/off via - /dynamic_printk/modules + dynamic_printk + Enables pr_debug()/dev_dbg() calls if + CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. These can also + be switched on/off via /dynamic_printk/modules print-fatal-signals= [KNL] debug: print fatal signals @@ -1903,7 +1884,7 @@ and is between 256 and 4096 characters. It is defined in the file reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode Format: [,[,...]] - See arch/*/kernel/reboot.c or arch/*/kernel/process.c + See arch/*/kernel/reboot.c or arch/*/kernel/process.c relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. @@ -2303,8 +2284,7 @@ and is between 256 and 4096 characters. It is defined in the file thermal.psv= [HW,ACPI] -1: disable all passive trip points - : override all passive trip points to this - value + : override all passive trip points to this value thermal.tzp= [HW,ACPI] Specify global default ACPI thermal zone polling rate @@ -2392,41 +2372,6 @@ and is between 256 and 4096 characters. It is defined in the file usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. - usb-storage.delay_use= - [UMS] The delay in seconds before a new device is - scanned for Logical Units (default 5). - - usb-storage.quirks= - [UMS] A list of quirks entries to supplement or - override the built-in unusual_devs list. List - entries are separated by commas. Each entry has - the form VID:PID:Flags where VID and PID are Vendor - and Product ID values (4-digit hex numbers) and - Flags is a set of characters, each corresponding - to a common usb-storage quirk flag as follows: - a = SANE_SENSE (collect more than 18 bytes - of sense data); - c = FIX_CAPACITY (decrease the reported - device capacity by one sector); - h = CAPACITY_HEURISTICS (decrease the - reported device capacity by one - sector if the number is odd); - i = IGNORE_DEVICE (don't bind to this - device); - l = NOT_LOCKABLE (don't try to lock and - unlock ejectable media); - m = MAX_SECTORS_64 (don't transfer more - than 64 sectors = 32 KB at a time); - o = CAPACITY_OK (accept the capacity - reported by the device); - r = IGNORE_RESIDUE (the device reports - bogus residue values); - s = SINGLE_LUN (the device has only one - Logical Unit); - w = NO_WP_DETECT (don't test whether the - medium is write-protected). - Example: quirks=0419:aaf5:rl,0421:0433:rc - add_efi_memmap [EFI; x86-32,X86-64] Include EFI memory map in kernel's map of available physical RAM. @@ -2487,8 +2432,8 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,,,,,[,[,[,]]] - norandmaps Don't use address space randomization. Equivalent to - echo 0 > /proc/sys/kernel/randomize_va_space + norandmaps Don't use address space randomization + Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space ______________________________________________________________________ diff --git a/trunk/Documentation/kobject.txt b/trunk/Documentation/kobject.txt index b2e374586bd8..f5d2aad65a67 100644 --- a/trunk/Documentation/kobject.txt +++ b/trunk/Documentation/kobject.txt @@ -118,8 +118,8 @@ the name of the kobject, call kobject_rename(): int kobject_rename(struct kobject *kobj, const char *new_name); -kobject_rename does not perform any locking or have a solid notion of -what names are valid so the caller must provide their own sanity checking +Note kobject_rename does perform any locking or have a solid notion of +what names are valid so the provide must provide their own sanity checking and serialization. There is a function called kobject_set_name() but that is legacy cruft and diff --git a/trunk/Documentation/kprobes.txt b/trunk/Documentation/kprobes.txt index 48b3de90eb1e..a79633d702bf 100644 --- a/trunk/Documentation/kprobes.txt +++ b/trunk/Documentation/kprobes.txt @@ -497,10 +497,7 @@ The first column provides the kernel address where the probe is inserted. The second column identifies the type of probe (k - kprobe, r - kretprobe and j - jprobe), while the third column specifies the symbol+offset of the probe. If the probed function belongs to a module, the module name -is also specified. Following columns show probe status. If the probe is on -a virtual address that is no longer valid (module init sections, module -virtual addresses that correspond to modules that've been unloaded), -such probes are marked with [GONE]. +is also specified. /debug/kprobes/enabled: Turn kprobes ON/OFF diff --git a/trunk/Documentation/laptops/thinkpad-acpi.txt b/trunk/Documentation/laptops/thinkpad-acpi.txt index 41bc99fa1884..71f0fe1fc1b0 100644 --- a/trunk/Documentation/laptops/thinkpad-acpi.txt +++ b/trunk/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.22 - November 23rd, 2008 + Version 0.21 + May 29th, 2008 Borislav Deianov Henrique de Moraes Holschuh @@ -16,8 +16,7 @@ supported by the generic Linux ACPI drivers. This driver used to be named ibm-acpi until kernel 2.6.21 and release 0.13-20070314. It used to be in the drivers/acpi tree, but it was moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel -2.6.22, and release 0.14. It was moved to drivers/platform/x86 for -kernel 2.6.29 and release 0.22. +2.6.22, and release 0.14. The driver is named "thinkpad-acpi". In some places, like module names, "thinkpad_acpi" is used because of userspace issues. @@ -1413,24 +1412,6 @@ Sysfs notes: rfkill controller switch "tpacpi_wwan_sw": refer to Documentation/rfkill.txt for details. -EXPERIMENTAL: UWB ------------------ - -This feature is marked EXPERIMENTAL because it has not been extensively -tested and validated in various ThinkPad models yet. The feature may not -work as expected. USE WITH CAUTION! To use this feature, you need to supply -the experimental=1 parameter when loading the module. - -sysfs rfkill class: switch "tpacpi_uwb_sw" - -This feature exports an rfkill controller for the UWB device, if one is -present and enabled in the BIOS. - -Sysfs notes: - - rfkill controller switch "tpacpi_uwb_sw": refer to - Documentation/rfkill.txt for details. - Multiple Commands, Module Parameters ------------------------------------ @@ -1494,7 +1475,7 @@ Sysfs interface changelog: 0x020100: Marker for thinkpad-acpi with hot key NVRAM polling support. If you must, use it to know you should not - start a userspace NVRAM poller (allows to detect when + start an userspace NVRAM poller (allows to detect when NVRAM is compiled out by the user because it is unneeded/undesired in the first place). 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling diff --git a/trunk/Documentation/lguest/Makefile b/trunk/Documentation/lguest/Makefile index 1f4f9e888bd1..725eef81cd48 100644 --- a/trunk/Documentation/lguest/Makefile +++ b/trunk/Documentation/lguest/Makefile @@ -1,5 +1,5 @@ # This creates the demonstration utility "lguest" which runs a Linux guest. -CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE +CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include LDLIBS:=-lz all: lguest diff --git a/trunk/Documentation/magic-number.txt b/trunk/Documentation/magic-number.txt index 505f19607542..95070028d15e 100644 --- a/trunk/Documentation/magic-number.txt +++ b/trunk/Documentation/magic-number.txt @@ -125,14 +125,14 @@ TRIDENT_CARD_MAGIC 0x5072696E trident_card sound/oss/trident.c ROUTER_MAGIC 0x524d4157 wan_device include/linux/wanrouter.h SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c -GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h +GDA_MAGIC 0x58464552 gda include/asm-mips64/sn/gda.h RED_MAGIC1 0x5a2cf071 (any) mm/slab.c STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h -KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h +KV_MAGIC 0x5f4b565f kernel_vars_s include/asm-mips64/sn/klkernvars.h I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c TRIDENT_STATE_MAGIC 0x63657373 trient_state sound/oss/trident.c M3_CARD_MAGIC 0x646e6f50 m3_card sound/oss/maestro3.c @@ -158,7 +158,7 @@ CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c QUEUE_MAGIC_USED 0xf7e1cc33 queue_entry drivers/scsi/arm/queue.c HTB_CMAGIC 0xFEFAFEF1 htb_class net/sched/sch_htb.c -NMI_MAGIC 0x48414d4d455201 nmi_s arch/mips/include/asm/sn/nmi.h +NMI_MAGIC 0x48414d4d455201 nmi_s include/asm-mips64/sn/nmi.h Note that there are also defined special per-driver magic numbers in sound memory management. See include/sound/sndmagic.h for complete list of them. Many diff --git a/trunk/Documentation/memory-hotplug.txt b/trunk/Documentation/memory-hotplug.txt index 4c2ecf537a4a..168117bd6ee8 100644 --- a/trunk/Documentation/memory-hotplug.txt +++ b/trunk/Documentation/memory-hotplug.txt @@ -124,7 +124,7 @@ config options. This option can be kernel module too. -------------------------------- -4 sysfs files for memory hotplug +3 sysfs files for memory hotplug -------------------------------- All sections have their device information under /sys/devices/system/memory as @@ -138,12 +138,11 @@ For example, assume 1GiB section size. A device for a memory starting at (0x100000000 / 1Gib = 4) This device covers address range [0x100000000 ... 0x140000000) -Under each section, you can see 4 files. +Under each section, you can see 3 files. /sys/devices/system/memory/memoryXXX/phys_index /sys/devices/system/memory/memoryXXX/phys_device /sys/devices/system/memory/memoryXXX/state -/sys/devices/system/memory/memoryXXX/removable 'phys_index' : read-only and contains section id, same as XXX. 'state' : read-write @@ -151,20 +150,10 @@ Under each section, you can see 4 files. at write: user can specify "online", "offline" command 'phys_device': read-only: designed to show the name of physical memory device. This is not well implemented now. -'removable' : read-only: contains an integer value indicating - whether the memory section is removable or not - removable. A value of 1 indicates that the memory - section is removable and a value of 0 indicates that - it is not removable. NOTE: These directories/files appear after physical memory hotplug phase. -If CONFIG_NUMA is enabled the -/sys/devices/system/memory/memoryXXX memory section -directories can also be accessed via symbolic links located in -the /sys/devices/system/node/node* directories. For example: -/sys/devices/system/node/node0/memory9 -> ../../memory/memory9 -------------------------------- 4. Physical memory hot-add phase @@ -376,6 +365,7 @@ node if necessary. - allowing memory hot-add to ZONE_MOVABLE. maybe we need some switch like sysctl or new control file. - showing memory section and physical device relationship. + - showing memory section and node relationship (maybe good for NUMA) - showing memory section is under ZONE_MOVABLE or not - test and make it better memory offlining. - support HugeTLB page migration and offlining. diff --git a/trunk/Documentation/mips/AU1xxx_IDE.README b/trunk/Documentation/mips/AU1xxx_IDE.README index 8ace35ebdcd5..25a6ed1aaa5b 100644 --- a/trunk/Documentation/mips/AU1xxx_IDE.README +++ b/trunk/Documentation/mips/AU1xxx_IDE.README @@ -44,7 +44,7 @@ FILES, CONFIGS AND COMPATABILITY Two files are introduced: - a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h' + a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h' containes : struct _auide_hwif timing parameters for PIO mode 0/1/2/3/4 timing parameters for MWDMA 0/1/2 @@ -52,12 +52,14 @@ Two files are introduced: b) 'drivers/ide/mips/au1xxx-ide.c' contains the functionality of the AU1XXX IDE driver -Following extra configs variables are introduced: +Four configs variables are introduced: CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA controller + CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size + per descriptor SUPPORTED IDE MODES @@ -85,6 +87,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDE_AU1XXX=y CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y +CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_AUTO=y @@ -102,6 +105,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDE_AU1XXX=y CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y +CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_AUTO=y diff --git a/trunk/Documentation/networking/alias.txt b/trunk/Documentation/networking/alias.txt index 85046f53fcfc..cd12c2ff518a 100644 --- a/trunk/Documentation/networking/alias.txt +++ b/trunk/Documentation/networking/alias.txt @@ -2,14 +2,14 @@ IP-Aliasing: ============ -IP-aliases are an obsolete way to manage multiple IP-addresses/masks -per interface. Newer tools such as iproute2 support multiple -address/prefixes per interface, but aliases are still supported -for backwards compatibility. - -An alias is formed by adding a colon and a string when running ifconfig. +IP-aliases are additional IP-addresses/masks hooked up to a base +interface by adding a colon and a string when running ifconfig. This string is usually numeric, but this is not a must. +IP-Aliases are avail if CONFIG_INET (`standard' IPv4 networking) +is configured in the kernel. + + o Alias creation. Alias creation is done by 'magic' interface naming: eg. to create a 200.1.1.1 alias for eth0 ... @@ -38,3 +38,16 @@ o Relationship with main device If the base device is shut down the added aliases will be deleted too. + + +Contact +------- +Please finger or e-mail me: + Juan Jose Ciarlante + +Updated by Erik Schoenfelder + +; local variables: +; mode: indented-text +; mode: auto-fill +; end: diff --git a/trunk/Documentation/networking/netconsole.txt b/trunk/Documentation/networking/netconsole.txt index 8d022073e3ef..3c2f2b328638 100644 --- a/trunk/Documentation/networking/netconsole.txt +++ b/trunk/Documentation/networking/netconsole.txt @@ -51,8 +51,7 @@ Built-in netconsole starts immediately after the TCP stack is initialized and attempts to bring up the supplied dev at the supplied address. -The remote host can run either 'netcat -u -l -p ', -'nc -l -u ' or syslogd. +The remote host can run either 'netcat -u -l -p ' or syslogd. Dynamic reconfiguration: ======================== diff --git a/trunk/Documentation/networking/rxrpc.txt b/trunk/Documentation/networking/rxrpc.txt index 60d05eb77c64..c3669a3fb4af 100644 --- a/trunk/Documentation/networking/rxrpc.txt +++ b/trunk/Documentation/networking/rxrpc.txt @@ -540,7 +540,7 @@ A client would issue an operation by: MSG_MORE should be set in msghdr::msg_flags on all but the last part of the request. Multiple requests may be made simultaneously. - If a call is intended to go to a destination other than the default + If a call is intended to go to a destination other then the default specified through connect(), then msghdr::msg_name should be set on the first request message of that call. diff --git a/trunk/Documentation/networking/tuntap.txt b/trunk/Documentation/networking/tuntap.txt index c0aab985bad9..839cbb71388b 100644 --- a/trunk/Documentation/networking/tuntap.txt +++ b/trunk/Documentation/networking/tuntap.txt @@ -118,7 +118,7 @@ As mentioned above, main purpose of TUN/TAP driver is tunneling. It is used by VTun (http://vtun.sourceforge.net). Another interesting application using TUN/TAP is pipsecd -(http://perso.enst.fr/~beyssac/pipsec/), a userspace IPSec +(http://perso.enst.fr/~beyssac/pipsec/), an userspace IPSec implementation that can use complete kernel routing (unlike FreeS/WAN). 3. How does Virtual network device actually work ? diff --git a/trunk/Documentation/nommu-mmap.txt b/trunk/Documentation/nommu-mmap.txt index b565e8279d13..7714f57caad5 100644 --- a/trunk/Documentation/nommu-mmap.txt +++ b/trunk/Documentation/nommu-mmap.txt @@ -109,18 +109,12 @@ and it's also much more restricted in the latter case: FURTHER NOTES ON NO-MMU MMAP ============================ - (*) A request for a private mapping of a file may return a buffer that is not - page-aligned. This is because XIP may take place, and the data may not be - paged aligned in the backing store. + (*) A request for a private mapping of less than a page in size may not return + a page-aligned buffer. This is because the kernel calls kmalloc() to + allocate the buffer, not get_free_page(). - (*) A request for an anonymous mapping will always be page aligned. If - possible the size of the request should be a power of two otherwise some - of the space may be wasted as the kernel must allocate a power-of-2 - granule but will only discard the excess if appropriately configured as - this has an effect on fragmentation. - - (*) A list of all the private copy and anonymous mappings on the system is - visible through /proc/maps in no-MMU mode. + (*) A list of all the mappings on the system is visible through /proc/maps in + no-MMU mode. (*) A list of all the mappings in use by a process is visible through /proc//maps in no-MMU mode. @@ -248,18 +242,3 @@ PROVIDING SHAREABLE BLOCK DEVICE SUPPORT Provision of shared mappings on block device files is exactly the same as for character devices. If there isn't a real device underneath, then the driver should allocate sufficient contiguous memory to honour any supported mapping. - - -================================= -ADJUSTING PAGE TRIMMING BEHAVIOUR -================================= - -NOMMU mmap automatically rounds up to the nearest power-of-2 number of pages -when performing an allocation. This can have adverse effects on memory -fragmentation, and as such, is left configurable. The default behaviour is to -aggressively trim allocations and discard any excess pages back in to the page -allocator. In order to retain finer-grained control over fragmentation, this -behaviour can either be disabled completely, or bumped up to a higher page -watermark where trimming begins. - -Page trimming behaviour is configurable via the sysctl `vm.nr_trim_pages'. diff --git a/trunk/Documentation/powerpc/cpu_features.txt b/trunk/Documentation/powerpc/cpu_features.txt index ffa4183fdb8b..472739880e87 100644 --- a/trunk/Documentation/powerpc/cpu_features.txt +++ b/trunk/Documentation/powerpc/cpu_features.txt @@ -31,7 +31,7 @@ anyways). After detecting the processor type, the kernel patches out sections of code that shouldn't be used by writing nop's over it. Using cpufeatures requires -just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S +just 2 macros (found in include/asm-ppc/cputable.h), as seen in head.S transfer_to_handler: #ifdef CONFIG_ALTIVEC diff --git a/trunk/Documentation/powerpc/dts-bindings/4xx/ndfc.txt b/trunk/Documentation/powerpc/dts-bindings/4xx/ndfc.txt deleted file mode 100644 index 869f0b5f16e8..000000000000 --- a/trunk/Documentation/powerpc/dts-bindings/4xx/ndfc.txt +++ /dev/null @@ -1,39 +0,0 @@ -AMCC NDFC (NanD Flash Controller) - -Required properties: -- compatible : "ibm,ndfc". -- reg : should specify chip select and size used for the chip (0x2000). - -Optional properties: -- ccr : NDFC config and control register value (default 0). -- bank-settings : NDFC bank configuration register value (default 0). - -Notes: -- partition(s) - follows the OF MTD standard for partitions - -Example: - -ndfc@1,0 { - compatible = "ibm,ndfc"; - reg = <0x00000001 0x00000000 0x00002000>; - ccr = <0x00001000>; - bank-settings = <0x80002222>; - #address-cells = <1>; - #size-cells = <1>; - - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x03E00000>; - }; - }; -}; - - diff --git a/trunk/Documentation/powerpc/dts-bindings/fsl/board.txt b/trunk/Documentation/powerpc/dts-bindings/fsl/board.txt index 6c974d28eeb4..81a917ef96e9 100644 --- a/trunk/Documentation/powerpc/dts-bindings/fsl/board.txt +++ b/trunk/Documentation/powerpc/dts-bindings/fsl/board.txt @@ -18,7 +18,7 @@ This is the memory-mapped registers for on board FPGA. Required properities: - compatible : should be "fsl,fpga-pixis". -- reg : should contain the address and the length of the FPPGA register +- reg : should contain the address and the lenght of the FPPGA register set. Example (MPC8610HPCD): @@ -27,33 +27,3 @@ Example (MPC8610HPCD): compatible = "fsl,fpga-pixis"; reg = <0xe8000000 32>; }; - -* Freescale BCSR GPIO banks - -Some BCSR registers act as simple GPIO controllers, each such -register can be represented by the gpio-controller node. - -Required properities: -- compatible : Should be "fsl,-bcsr-gpio". -- reg : Should contain the address and the length of the GPIO bank - register. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional paramters (currently unused). -- gpio-controller : Marks the port as GPIO controller. - -Example: - - bcsr@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8360mds-bcsr"; - reg = <1 0 0x8000>; - ranges = <0 1 0 0x8000>; - - bcsr13: gpio-controller@d { - #gpio-cells = <2>; - compatible = "fsl,mpc8360mds-bcsr-gpio"; - reg = <0xd 1>; - gpio-controller; - }; - }; diff --git a/trunk/Documentation/s390/Debugging390.txt b/trunk/Documentation/s390/Debugging390.txt index 10711d9f0788..d30a281c570f 100644 --- a/trunk/Documentation/s390/Debugging390.txt +++ b/trunk/Documentation/s390/Debugging390.txt @@ -1402,7 +1402,7 @@ Syscalls are implemented on Linux for S390 by the Supervisor call instruction (S possibilities of these as the instruction is made up of a 0xA opcode & the second byte being the syscall number. They are traced using the simple command. TR SVC -the syscalls are defined in linux/arch/s390/include/asm/unistd.h +the syscalls are defined in linux/include/asm-s390/unistd.h e.g. to trace all file opens just do TR SVC 5 ( as this is the syscall number of open ) diff --git a/trunk/Documentation/s390/cds.txt b/trunk/Documentation/s390/cds.txt index 480a78ef5a1e..c4b7b2bd369a 100644 --- a/trunk/Documentation/s390/cds.txt +++ b/trunk/Documentation/s390/cds.txt @@ -98,7 +98,7 @@ platform. Some of the interface routines are specific to Linux/390 and some of them can be found on other Linux platforms implementations too. Miscellaneous function prototypes, data declarations, and macro definitions can be found in the architecture specific C header file -linux/arch/s390/include/asm/irq.h. +linux/include/asm-s390/irq.h. Overview of CDS interface concepts diff --git a/trunk/Documentation/s390/s390dbf.txt b/trunk/Documentation/s390/s390dbf.txt index 2d10053dd97e..e05420973698 100644 --- a/trunk/Documentation/s390/s390dbf.txt +++ b/trunk/Documentation/s390/s390dbf.txt @@ -2,7 +2,7 @@ S390 Debug Feature ================== files: arch/s390/kernel/debug.c - arch/s390/include/asm/debug.h + include/asm-s390/debug.h Description: ------------ diff --git a/trunk/Documentation/scheduler/sched-design-CFS.txt b/trunk/Documentation/scheduler/sched-design-CFS.txt index 6f33593e59e2..8398ca4ff4ed 100644 --- a/trunk/Documentation/scheduler/sched-design-CFS.txt +++ b/trunk/Documentation/scheduler/sched-design-CFS.txt @@ -231,7 +231,7 @@ CPU bandwidth control purposes: This options needs CONFIG_CGROUPS to be defined, and lets the administrator create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See - Documentation/cgroups/cgroups.txt for more information about this filesystem. + Documentation/cgroups.txt for more information about this filesystem. Only one of these options to group tasks can be chosen and not both. diff --git a/trunk/Documentation/scsi/ChangeLog.lpfc b/trunk/Documentation/scsi/ChangeLog.lpfc index ff19a52fe004..ae3f962a7cfc 100644 --- a/trunk/Documentation/scsi/ChangeLog.lpfc +++ b/trunk/Documentation/scsi/ChangeLog.lpfc @@ -733,7 +733,7 @@ Changes from 20040920 to 20041018 I/O completion path a little more, especially taking care of fast-pathing the non-error case. Also removes tons of dead members and defines from lpfc_scsi.h - e.g. lpfc_target is down - to nothing more than the lpfc_nodelist pointer. + to nothing more then the lpfc_nodelist pointer. * Added binary sysfs file to issue mbox commands * Replaced #if __BIG_ENDIAN with #if __BIG_ENDIAN_BITFIELD for compatibility with the user space applications. diff --git a/trunk/Documentation/scsi/ChangeLog.ncr53c8xx b/trunk/Documentation/scsi/ChangeLog.ncr53c8xx index 8b278c10edfd..a9f721aeb11c 100644 --- a/trunk/Documentation/scsi/ChangeLog.ncr53c8xx +++ b/trunk/Documentation/scsi/ChangeLog.ncr53c8xx @@ -19,7 +19,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr) Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr) * version ncr53c8xx-3.4.1 - - Provide OpenFirmware path through the proc FS on PPC. + - Provide OpenFirmare path through the proc FS on PPC. - Remove trailing argument #2 from a couple of #undefs. Sun Jul 09 16:30 2000 Gerard Roudier (groudier@club-internet.fr) diff --git a/trunk/Documentation/scsi/ChangeLog.sym53c8xx b/trunk/Documentation/scsi/ChangeLog.sym53c8xx index 02ffbc1e8a84..ef985ec348e6 100644 --- a/trunk/Documentation/scsi/ChangeLog.sym53c8xx +++ b/trunk/Documentation/scsi/ChangeLog.sym53c8xx @@ -81,7 +81,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr) Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr) * version sym53c8xx-1.7.1 - - Provide OpenFirmware path through the proc FS on PPC. + - Provide OpenFirmare path through the proc FS on PPC. - Download of on-chip SRAM using memcpy_toio() doesn't work on PPC. Restore previous method (MEMORY MOVE from SCRIPTS). - Remove trailing argument #2 from a couple of #undefs. diff --git a/trunk/Documentation/scsi/scsi_fc_transport.txt b/trunk/Documentation/scsi/scsi_fc_transport.txt index e5b071d46619..38d324d62b25 100644 --- a/trunk/Documentation/scsi/scsi_fc_transport.txt +++ b/trunk/Documentation/scsi/scsi_fc_transport.txt @@ -191,7 +191,7 @@ Vport States: This is equivalent to a driver "attach" on an adapter, which is independent of the adapter's link state. - Instantiation of the vport on the FC link via ELS traffic, etc. - This is equivalent to a "link up" and successful link initialization. + This is equivalent to a "link up" and successfull link initialization. Further information can be found in the interfaces section below for Vport Creation. @@ -320,7 +320,7 @@ Vport Creation: This is equivalent to a driver "attach" on an adapter, which is independent of the adapter's link state. - Instantiation of the vport on the FC link via ELS traffic, etc. - This is equivalent to a "link up" and successful link initialization. + This is equivalent to a "link up" and successfull link initialization. The LLDD's vport_create() function will not synchronously wait for both parts to be fully completed before returning. It must validate that the diff --git a/trunk/Documentation/sound/alsa/HD-Audio-Models.txt b/trunk/Documentation/sound/alsa/HD-Audio-Models.txt index 0f5d26bea80f..4b7ac21ea9eb 100644 --- a/trunk/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/trunk/Documentation/sound/alsa/HD-Audio-Models.txt @@ -275,8 +275,7 @@ STAC9200 dell-m25 Dell Inspiron E1505n dell-m26 Dell Inspiron 1501 dell-m27 Dell Inspiron E1705/9400 - gateway-m4 Gateway laptops with EAPD control - gateway-m4-2 Gateway laptops with EAPD control + gateway Gateway laptops with EAPD control panasonic Panasonic CF-74 STAC9205/9254 @@ -303,7 +302,6 @@ STAC9220/9221 macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3) imac-intel Intel iMac (eq. type 2) imac-intel-20 Intel iMac (newer version) (eq. type 3) - ecs202 ECS/PC chips dell-d81 Dell (unknown) dell-d82 Dell (unknown) dell-m81 Dell (unknown) @@ -312,13 +310,9 @@ STAC9220/9221 STAC9202/9250/9251 ================== ref Reference board, base config - m1 Some Gateway MX series laptops (NX560XL) - m1-2 Some Gateway MX series laptops (MX6453) - m2 Some Gateway MX series laptops (M255) m2-2 Some Gateway MX series laptops - m3 Some Gateway MX series laptops - m5 Some Gateway MX series laptops (MP6954) m6 Some Gateway NX series laptops + pa6 Gateway NX860 series STAC9227/9228/9229/927x ======================= @@ -335,7 +329,6 @@ STAC92HD71B* dell-m4-1 Dell desktops dell-m4-2 Dell desktops dell-m4-3 Dell desktops - hp-m4 HP dv laptops STAC92HD73* =========== @@ -344,12 +337,10 @@ STAC92HD73* dell-m6-amic Dell desktops/laptops with analog mics dell-m6-dmic Dell desktops/laptops with digital mics dell-m6 Dell desktops/laptops with both type of mics - dell-eq Dell desktops/laptops STAC92HD83* =========== ref Reference board - mic-ref Reference board with power managment for ports STAC9872 ======== diff --git a/trunk/Documentation/spi/spi-lm70llp b/trunk/Documentation/spi/spi-lm70llp index 34a9cfd746bd..154bd02220b9 100644 --- a/trunk/Documentation/spi/spi-lm70llp +++ b/trunk/Documentation/spi/spi-lm70llp @@ -13,20 +13,10 @@ Description This driver provides glue code connecting a National Semiconductor LM70 LLP temperature sensor evaluation board to the kernel's SPI core subsystem. -This is a SPI master controller driver. It can be used in conjunction with -(layered under) the LM70 logical driver (a "SPI protocol driver"). In effect, this driver turns the parallel port interface on the eval board into a SPI bus with a single device, which will be driven by the generic LM70 driver (drivers/hwmon/lm70.c). - -Hardware Interfacing --------------------- -The schematic for this particular board (the LM70EVAL-LLP) is -available (on page 4) here: - - http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf - The hardware interfacing on the LM70 LLP eval board is as follows: Parallel LM70 LLP diff --git a/trunk/Documentation/sysctl/vm.txt b/trunk/Documentation/sysctl/vm.txt index 3197fc83bc51..d79eeda7a699 100644 --- a/trunk/Documentation/sysctl/vm.txt +++ b/trunk/Documentation/sysctl/vm.txt @@ -1,13 +1,12 @@ -Documentation for /proc/sys/vm/* kernel version 2.6.29 +Documentation for /proc/sys/vm/* kernel version 2.2.10 (c) 1998, 1999, Rik van Riel - (c) 2008 Peter W. Morreale For general info and legal blurb, please look in README. ============================================================== This file contains the documentation for the sysctl files in -/proc/sys/vm and is valid for Linux kernel version 2.6.29. +/proc/sys/vm and is valid for Linux kernel version 2.2. The files in this directory can be used to tune the operation of the virtual memory (VM) subsystem of the Linux kernel and @@ -17,244 +16,81 @@ Default values and initialization routines for most of these files can be found in mm/swap.c. Currently, these files are in /proc/sys/vm: - -- block_dump -- dirty_background_bytes +- overcommit_memory +- page-cluster +- dirty_ratio - dirty_background_ratio -- dirty_bytes - dirty_expire_centisecs -- dirty_ratio - dirty_writeback_centisecs -- drop_caches -- hugepages_treat_as_movable -- hugetlb_shm_group -- laptop_mode -- legacy_va_layout -- lowmem_reserve_ratio +- highmem_is_dirtyable (only if CONFIG_HIGHMEM set) - max_map_count - min_free_kbytes -- min_slab_ratio +- laptop_mode +- block_dump +- drop-caches +- zone_reclaim_mode - min_unmapped_ratio -- mmap_min_addr -- nr_hugepages -- nr_overcommit_hugepages -- nr_pdflush_threads -- nr_trim_pages (only if CONFIG_MMU=n) -- numa_zonelist_order +- min_slab_ratio +- panic_on_oom - oom_dump_tasks - oom_kill_allocating_task -- overcommit_memory -- overcommit_ratio -- page-cluster -- panic_on_oom -- percpu_pagelist_fraction -- stat_interval -- swappiness -- vfs_cache_pressure -- zone_reclaim_mode - - -============================================================== - -block_dump - -block_dump enables block I/O debugging when set to a nonzero value. More -information on block I/O debugging is in Documentation/laptops/laptop-mode.txt. - -============================================================== - -dirty_background_bytes - -Contains the amount of dirty memory at which the pdflush background writeback -daemon will start writeback. - -If dirty_background_bytes is written, dirty_background_ratio becomes a function -of its value (dirty_background_bytes / the amount of dirtyable system memory). - -============================================================== - -dirty_background_ratio - -Contains, as a percentage of total system memory, the number of pages at which -the pdflush background writeback daemon will start writing out dirty data. - -============================================================== - -dirty_bytes - -Contains the amount of dirty memory at which a process generating disk writes -will itself start writeback. - -If dirty_bytes is written, dirty_ratio becomes a function of its value -(dirty_bytes / the amount of dirtyable system memory). - -============================================================== - -dirty_expire_centisecs - -This tunable is used to define when dirty data is old enough to be eligible -for writeout by the pdflush daemons. It is expressed in 100'ths of a second. -Data which has been dirty in-memory for longer than this interval will be -written out next time a pdflush daemon wakes up. - -============================================================== - -dirty_ratio - -Contains, as a percentage of total system memory, the number of pages at which -a process which is generating disk writes will itself start writing out dirty -data. +- mmap_min_address +- numa_zonelist_order +- nr_hugepages +- nr_overcommit_hugepages ============================================================== -dirty_writeback_centisecs - -The pdflush writeback daemons will periodically wake up and write `old' data -out to disk. This tunable expresses the interval between those wakeups, in -100'ths of a second. +dirty_ratio, dirty_background_ratio, dirty_expire_centisecs, +dirty_writeback_centisecs, highmem_is_dirtyable, +vfs_cache_pressure, laptop_mode, block_dump, swap_token_timeout, +drop-caches, hugepages_treat_as_movable: -Setting this to zero disables periodic writeback altogether. +See Documentation/filesystems/proc.txt ============================================================== -drop_caches +overcommit_memory: -Writing to this will cause the kernel to drop clean caches, dentries and -inodes from memory, causing that memory to become free. +This value contains a flag that enables memory overcommitment. -To free pagecache: - echo 1 > /proc/sys/vm/drop_caches -To free dentries and inodes: - echo 2 > /proc/sys/vm/drop_caches -To free pagecache, dentries and inodes: - echo 3 > /proc/sys/vm/drop_caches +When this flag is 0, the kernel attempts to estimate the amount +of free memory left when userspace requests more memory. -As this is a non-destructive operation and dirty objects are not freeable, the -user should run `sync' first. +When this flag is 1, the kernel pretends there is always enough +memory until it actually runs out. -============================================================== +When this flag is 2, the kernel uses a "never overcommit" +policy that attempts to prevent any overcommit of memory. -hugepages_treat_as_movable +This feature can be very useful because there are a lot of +programs that malloc() huge amounts of memory "just-in-case" +and don't use much of it. -This parameter is only useful when kernelcore= is specified at boot time to -create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages -are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero -value written to hugepages_treat_as_movable allows huge pages to be allocated -from ZONE_MOVABLE. +The default value is 0. -Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge -pages pool can easily grow or shrink within. Assuming that applications are -not running that mlock() a lot of memory, it is likely the huge pages pool -can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value -into nr_hugepages and triggering page reclaim. +See Documentation/vm/overcommit-accounting and +security/commoncap.c::cap_vm_enough_memory() for more information. ============================================================== -hugetlb_shm_group +overcommit_ratio: -hugetlb_shm_group contains group id that is allowed to create SysV -shared memory segment using hugetlb page. +When overcommit_memory is set to 2, the committed address +space is not permitted to exceed swap plus this percentage +of physical RAM. See above. ============================================================== -laptop_mode - -laptop_mode is a knob that controls "laptop mode". All the things that are -controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt. - -============================================================== +page-cluster: -legacy_va_layout +The Linux VM subsystem avoids excessive disk seeks by reading +multiple pages on a page fault. The number of pages it reads +is dependent on the amount of memory in your machine. -If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel -will use the legacy (2.4) layout for all processes. - -============================================================== - -lowmem_reserve_ratio - -For some specialised workloads on highmem machines it is dangerous for -the kernel to allow process memory to be allocated from the "lowmem" -zone. This is because that memory could then be pinned via the mlock() -system call, or by unavailability of swapspace. - -And on large highmem machines this lack of reclaimable lowmem memory -can be fatal. - -So the Linux page allocator has a mechanism which prevents allocations -which _could_ use highmem from using too much lowmem. This means that -a certain amount of lowmem is defended from the possibility of being -captured into pinned user memory. - -(The same argument applies to the old 16 megabyte ISA DMA region. This -mechanism will also defend that region from allocations which could use -highmem or lowmem). - -The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is -in defending these lower zones. - -If you have a machine which uses highmem or ISA DMA and your -applications are using mlock(), or if you are running with no swap then -you probably should change the lowmem_reserve_ratio setting. - -The lowmem_reserve_ratio is an array. You can see them by reading this file. -- -% cat /proc/sys/vm/lowmem_reserve_ratio -256 256 32 -- -Note: # of this elements is one fewer than number of zones. Because the highest - zone's value is not necessary for following calculation. - -But, these values are not used directly. The kernel calculates # of protection -pages for each zones from them. These are shown as array of protection pages -in /proc/zoneinfo like followings. (This is an example of x86-64 box). -Each zone has an array of protection pages like this. - -- -Node 0, zone DMA - pages free 1355 - min 3 - low 3 - high 4 - : - : - numa_other 0 - protection: (0, 2004, 2004, 2004) - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - pagesets - cpu: 0 pcp: 0 - : -- -These protections are added to score to judge whether this zone should be used -for page allocation or should be reclaimed. - -In this example, if normal pages (index=2) are required to this DMA zone and -pages_high is used for watermark, the kernel judges this zone should not be -used because pages_free(1355) is smaller than watermark + protection[2] -(4 + 2004 = 2008). If this protection value is 0, this zone would be used for -normal page requirement. If requirement is DMA zone(index=0), protection[0] -(=0) is used. - -zone[i]'s protection[j] is calculated by following expression. - -(i < j): - zone[i]->protection[j] - = (total sums of present_pages from zone[i+1] to zone[j] on the node) - / lowmem_reserve_ratio[i]; -(i = j): - (should not be protected. = 0; -(i > j): - (not necessary, but looks 0) - -The default values of lowmem_reserve_ratio[i] are - 256 (if zone[i] means DMA or DMA32 zone) - 32 (others). -As above expression, they are reciprocal number of ratio. -256 means 1/256. # of protection pages becomes about "0.39%" of total present -pages of higher zones on the node. - -If you would like to protect more pages, smaller values are effective. -The minimum value is 1 (1/1 -> 100%). +The number of pages the kernel reads in at once is equal to +2 ^ page-cluster. Values above 2 ^ 5 don't make much sense +for swap because we only cluster swap data in 32-page groups. ============================================================== @@ -275,9 +111,9 @@ The default value is 65536. min_free_kbytes: -This is used to force the Linux VM to keep a minimum number +This is used to force the Linux VM to keep a minimum number of kilobytes free. The VM uses this number to compute a pages_min -value for each lowmem zone in the system. Each lowmem zone gets +value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size. Some minimal amount of memory is needed to satisfy PF_MEMALLOC @@ -286,140 +122,116 @@ become subtly broken, and prone to deadlock under high loads. Setting this too high will OOM your machine instantly. -============================================================= - -min_slab_ratio: - -This is available only on NUMA kernels. - -A percentage of the total pages in each zone. On Zone reclaim -(fallback from the local zone occurs) slabs will be reclaimed if more -than this percentage of pages in a zone are reclaimable slab pages. -This insures that the slab growth stays under control even in NUMA -systems that rarely perform global reclaim. - -The default is 5 percent. - -Note that slab reclaim is triggered in a per zone / node fashion. -The process of reclaiming slab memory is currently not node specific -and may not be fast. - -============================================================= - -min_unmapped_ratio: - -This is available only on NUMA kernels. - -A percentage of the total pages in each zone. Zone reclaim will only -occur if more than this percentage of pages are file backed and unmapped. -This is to insure that a minimal amount of local pages is still available for -file I/O even if the node is overallocated. - -The default is 1 percent. - ============================================================== -mmap_min_addr - -This file indicates the amount of address space which a user process will -be restricted from mmaping. Since kernel null dereference bugs could -accidentally operate based on the information in the first couple of pages -of memory userspace processes should not be allowed to write to them. By -default this value is set to 0 and no protections will be enforced by the -security module. Setting this value to something like 64k will allow the -vast majority of applications to work correctly and provide defense in depth -against future potential kernel bugs. - -============================================================== - -nr_hugepages +percpu_pagelist_fraction -Change the minimum size of the hugepage pool. +This is the fraction of pages at most (high mark pcp->high) in each zone that +are allocated for each per cpu page list. The min value for this is 8. It +means that we don't allow more than 1/8th of pages in each zone to be +allocated in any single per_cpu_pagelist. This entry only changes the value +of hot per cpu pagelists. User can specify a number like 100 to allocate +1/100th of each zone to each per cpu page list. -See Documentation/vm/hugetlbpage.txt +The batch value of each per cpu pagelist is also updated as a result. It is +set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8) -============================================================== +The initial value is zero. Kernel does not use this value at boot time to set +the high water marks for each per cpu page list. -nr_overcommit_hugepages +=============================================================== -Change the maximum size of the hugepage pool. The maximum is -nr_hugepages + nr_overcommit_hugepages. +zone_reclaim_mode: -See Documentation/vm/hugetlbpage.txt +Zone_reclaim_mode allows someone to set more or less aggressive approaches to +reclaim memory when a zone runs out of memory. If it is set to zero then no +zone reclaim occurs. Allocations will be satisfied from other zones / nodes +in the system. -============================================================== +This is value ORed together of -nr_pdflush_threads +1 = Zone reclaim on +2 = Zone reclaim writes dirty pages out +4 = Zone reclaim swaps pages -The current number of pdflush threads. This value is read-only. -The value changes according to the number of dirty pages in the system. +zone_reclaim_mode is set during bootup to 1 if it is determined that pages +from remote zones will cause a measurable performance reduction. The +page allocator will then reclaim easily reusable pages (those page +cache pages that are currently not used) before allocating off node pages. -When neccessary, additional pdflush threads are created, one per second, up to -nr_pdflush_threads_max. +It may be beneficial to switch off zone reclaim if the system is +used for a file server and all of memory should be used for caching files +from disk. In that case the caching effect is more important than +data locality. -============================================================== +Allowing zone reclaim to write out pages stops processes that are +writing large amounts of data from dirtying pages on other nodes. Zone +reclaim will write out dirty pages if a zone fills up and so effectively +throttle the process. This may decrease the performance of a single process +since it cannot use all of system memory to buffer the outgoing writes +anymore but it preserve the memory on other nodes so that the performance +of other processes running on other nodes will not be affected. -nr_trim_pages +Allowing regular swap effectively restricts allocations to the local +node unless explicitly overridden by memory policies or cpuset +configurations. -This is available only on NOMMU kernels. +============================================================= -This value adjusts the excess page trimming behaviour of power-of-2 aligned -NOMMU mmap allocations. +min_unmapped_ratio: -A value of 0 disables trimming of allocations entirely, while a value of 1 -trims excess pages aggressively. Any value >= 1 acts as the watermark where -trimming of allocations is initiated. +This is available only on NUMA kernels. -The default value is 1. +A percentage of the total pages in each zone. Zone reclaim will only +occur if more than this percentage of pages are file backed and unmapped. +This is to insure that a minimal amount of local pages is still available for +file I/O even if the node is overallocated. -See Documentation/nommu-mmap.txt for more information. +The default is 1 percent. -============================================================== +============================================================= -numa_zonelist_order +min_slab_ratio: -This sysctl is only for NUMA. -'where the memory is allocated from' is controlled by zonelists. -(This documentation ignores ZONE_HIGHMEM/ZONE_DMA32 for simple explanation. - you may be able to read ZONE_DMA as ZONE_DMA32...) +This is available only on NUMA kernels. -In non-NUMA case, a zonelist for GFP_KERNEL is ordered as following. -ZONE_NORMAL -> ZONE_DMA -This means that a memory allocation request for GFP_KERNEL will -get memory from ZONE_DMA only when ZONE_NORMAL is not available. +A percentage of the total pages in each zone. On Zone reclaim +(fallback from the local zone occurs) slabs will be reclaimed if more +than this percentage of pages in a zone are reclaimable slab pages. +This insures that the slab growth stays under control even in NUMA +systems that rarely perform global reclaim. -In NUMA case, you can think of following 2 types of order. -Assume 2 node NUMA and below is zonelist of Node(0)'s GFP_KERNEL +The default is 5 percent. -(A) Node(0) ZONE_NORMAL -> Node(0) ZONE_DMA -> Node(1) ZONE_NORMAL -(B) Node(0) ZONE_NORMAL -> Node(1) ZONE_NORMAL -> Node(0) ZONE_DMA. +Note that slab reclaim is triggered in a per zone / node fashion. +The process of reclaiming slab memory is currently not node specific +and may not be fast. -Type(A) offers the best locality for processes on Node(0), but ZONE_DMA -will be used before ZONE_NORMAL exhaustion. This increases possibility of -out-of-memory(OOM) of ZONE_DMA because ZONE_DMA is tend to be small. +============================================================= -Type(B) cannot offer the best locality but is more robust against OOM of -the DMA zone. +panic_on_oom -Type(A) is called as "Node" order. Type (B) is "Zone" order. +This enables or disables panic on out-of-memory feature. -"Node order" orders the zonelists by node, then by zone within each node. -Specify "[Nn]ode" for zone order +If this is set to 0, the kernel will kill some rogue process, +called oom_killer. Usually, oom_killer can kill rogue processes and +system will survive. -"Zone Order" orders the zonelists by zone type, then by node within each -zone. Specify "[Zz]one"for zode order. +If this is set to 1, the kernel panics when out-of-memory happens. +However, if a process limits using nodes by mempolicy/cpusets, +and those nodes become memory exhaustion status, one process +may be killed by oom-killer. No panic occurs in this case. +Because other nodes' memory may be free. This means system total status +may be not fatal yet. -Specify "[Dd]efault" to request automatic configuration. Autoconfiguration -will select "node" order in following case. -(1) if the DMA zone does not exist or -(2) if the DMA zone comprises greater than 50% of the available memory or -(3) if any node's DMA zone comprises greater than 60% of its local memory and - the amount of local memory is big enough. +If this is set to 2, the kernel panics compulsorily even on the +above-mentioned. -Otherwise, "zone" order will be selected. Default order is recommended unless -this is causing problems for your system/application. +The default value is 0. +1 and 2 are for failover of clustering. Please select either +according to your policy of failover. -============================================================== +============================================================= oom_dump_tasks @@ -440,7 +252,7 @@ OOM killer actually kills a memory-hogging task. The default value is 0. -============================================================== +============================================================= oom_kill_allocating_task @@ -463,157 +275,75 @@ The default value is 0. ============================================================== -overcommit_memory: - -This value contains a flag that enables memory overcommitment. - -When this flag is 0, the kernel attempts to estimate the amount -of free memory left when userspace requests more memory. - -When this flag is 1, the kernel pretends there is always enough -memory until it actually runs out. - -When this flag is 2, the kernel uses a "never overcommit" -policy that attempts to prevent any overcommit of memory. - -This feature can be very useful because there are a lot of -programs that malloc() huge amounts of memory "just-in-case" -and don't use much of it. - -The default value is 0. - -See Documentation/vm/overcommit-accounting and -security/commoncap.c::cap_vm_enough_memory() for more information. - -============================================================== - -overcommit_ratio: +mmap_min_addr -When overcommit_memory is set to 2, the committed address -space is not permitted to exceed swap plus this percentage -of physical RAM. See above. +This file indicates the amount of address space which a user process will +be restricted from mmaping. Since kernel null dereference bugs could +accidentally operate based on the information in the first couple of pages +of memory userspace processes should not be allowed to write to them. By +default this value is set to 0 and no protections will be enforced by the +security module. Setting this value to something like 64k will allow the +vast majority of applications to work correctly and provide defense in depth +against future potential kernel bugs. ============================================================== -page-cluster - -page-cluster controls the number of pages which are written to swap in -a single attempt. The swap I/O size. - -It is a logarithmic value - setting it to zero means "1 page", setting -it to 1 means "2 pages", setting it to 2 means "4 pages", etc. - -The default value is three (eight pages at a time). There may be some -small benefits in tuning this to a different value if your workload is -swap-intensive. - -============================================================= - -panic_on_oom - -This enables or disables panic on out-of-memory feature. - -If this is set to 0, the kernel will kill some rogue process, -called oom_killer. Usually, oom_killer can kill rogue processes and -system will survive. - -If this is set to 1, the kernel panics when out-of-memory happens. -However, if a process limits using nodes by mempolicy/cpusets, -and those nodes become memory exhaustion status, one process -may be killed by oom-killer. No panic occurs in this case. -Because other nodes' memory may be free. This means system total status -may be not fatal yet. - -If this is set to 2, the kernel panics compulsorily even on the -above-mentioned. - -The default value is 0. -1 and 2 are for failover of clustering. Please select either -according to your policy of failover. - -============================================================= +numa_zonelist_order -percpu_pagelist_fraction +This sysctl is only for NUMA. +'where the memory is allocated from' is controlled by zonelists. +(This documentation ignores ZONE_HIGHMEM/ZONE_DMA32 for simple explanation. + you may be able to read ZONE_DMA as ZONE_DMA32...) -This is the fraction of pages at most (high mark pcp->high) in each zone that -are allocated for each per cpu page list. The min value for this is 8. It -means that we don't allow more than 1/8th of pages in each zone to be -allocated in any single per_cpu_pagelist. This entry only changes the value -of hot per cpu pagelists. User can specify a number like 100 to allocate -1/100th of each zone to each per cpu page list. +In non-NUMA case, a zonelist for GFP_KERNEL is ordered as following. +ZONE_NORMAL -> ZONE_DMA +This means that a memory allocation request for GFP_KERNEL will +get memory from ZONE_DMA only when ZONE_NORMAL is not available. -The batch value of each per cpu pagelist is also updated as a result. It is -set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8) +In NUMA case, you can think of following 2 types of order. +Assume 2 node NUMA and below is zonelist of Node(0)'s GFP_KERNEL -The initial value is zero. Kernel does not use this value at boot time to set -the high water marks for each per cpu page list. +(A) Node(0) ZONE_NORMAL -> Node(0) ZONE_DMA -> Node(1) ZONE_NORMAL +(B) Node(0) ZONE_NORMAL -> Node(1) ZONE_NORMAL -> Node(0) ZONE_DMA. -============================================================== +Type(A) offers the best locality for processes on Node(0), but ZONE_DMA +will be used before ZONE_NORMAL exhaustion. This increases possibility of +out-of-memory(OOM) of ZONE_DMA because ZONE_DMA is tend to be small. -stat_interval +Type(B) cannot offer the best locality but is more robust against OOM of +the DMA zone. -The time interval between which vm statistics are updated. The default -is 1 second. +Type(A) is called as "Node" order. Type (B) is "Zone" order. -============================================================== +"Node order" orders the zonelists by node, then by zone within each node. +Specify "[Nn]ode" for zone order -swappiness +"Zone Order" orders the zonelists by zone type, then by node within each +zone. Specify "[Zz]one"for zode order. -This control is used to define how aggressive the kernel will swap -memory pages. Higher values will increase agressiveness, lower values -descrease the amount of swap. +Specify "[Dd]efault" to request automatic configuration. Autoconfiguration +will select "node" order in following case. +(1) if the DMA zone does not exist or +(2) if the DMA zone comprises greater than 50% of the available memory or +(3) if any node's DMA zone comprises greater than 60% of its local memory and + the amount of local memory is big enough. -The default value is 60. +Otherwise, "zone" order will be selected. Default order is recommended unless +this is causing problems for your system/application. ============================================================== -vfs_cache_pressure ------------------- +nr_hugepages -Controls the tendency of the kernel to reclaim the memory which is used for -caching of directory and inode objects. +Change the minimum size of the hugepage pool. -At the default value of vfs_cache_pressure=100 the kernel will attempt to -reclaim dentries and inodes at a "fair" rate with respect to pagecache and -swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer -to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100 -causes the kernel to prefer to reclaim dentries and inodes. +See Documentation/vm/hugetlbpage.txt ============================================================== -zone_reclaim_mode: - -Zone_reclaim_mode allows someone to set more or less aggressive approaches to -reclaim memory when a zone runs out of memory. If it is set to zero then no -zone reclaim occurs. Allocations will be satisfied from other zones / nodes -in the system. - -This is value ORed together of - -1 = Zone reclaim on -2 = Zone reclaim writes dirty pages out -4 = Zone reclaim swaps pages - -zone_reclaim_mode is set during bootup to 1 if it is determined that pages -from remote zones will cause a measurable performance reduction. The -page allocator will then reclaim easily reusable pages (those page -cache pages that are currently not used) before allocating off node pages. - -It may be beneficial to switch off zone reclaim if the system is -used for a file server and all of memory should be used for caching files -from disk. In that case the caching effect is more important than -data locality. - -Allowing zone reclaim to write out pages stops processes that are -writing large amounts of data from dirtying pages on other nodes. Zone -reclaim will write out dirty pages if a zone fills up and so effectively -throttle the process. This may decrease the performance of a single process -since it cannot use all of system memory to buffer the outgoing writes -anymore but it preserve the memory on other nodes so that the performance -of other processes running on other nodes will not be affected. +nr_overcommit_hugepages -Allowing regular swap effectively restricts allocations to the local -node unless explicitly overridden by memory policies or cpuset -configurations. +Change the maximum size of the hugepage pool. The maximum is +nr_hugepages + nr_overcommit_hugepages. -============ End of Document ================================= +See Documentation/vm/hugetlbpage.txt diff --git a/trunk/Documentation/sysrq.txt b/trunk/Documentation/sysrq.txt index 9e592c718afb..10a0263ebb3f 100644 --- a/trunk/Documentation/sysrq.txt +++ b/trunk/Documentation/sysrq.txt @@ -1,5 +1,6 @@ Linux Magic System Request Key Hacks Documentation for sysrq.c +Last update: 2007-AUG-04 * What is the magic SysRq key? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -210,24 +211,6 @@ within a function called by handle_sysrq, you must be aware that you are in a lock (you are also in an interrupt handler, which means don't sleep!), so you must call __handle_sysrq_nolock instead. -* When I hit a SysRq key combination only the header appears on the console? -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Sysrq output is subject to the same console loglevel control as all -other console output. This means that if the kernel was booted 'quiet' -as is common on distro kernels the output may not appear on the actual -console, even though it will appear in the dmesg buffer, and be accessible -via the dmesg command and to the consumers of /proc/kmsg. As a specific -exception the header line from the sysrq command is passed to all console -consumers as if the current loglevel was maximum. If only the header -is emitted it is almost certain that the kernel loglevel is too low. -Should you require the output on the console channel then you will need -to temporarily up the console loglevel using alt-sysrq-8 or: - - echo 8 > /proc/sysrq-trigger - -Remember to return the loglevel to normal after triggering the sysrq -command you are interested in. - * I have more questions, who can I ask? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ And I'll answer any questions about the registration system you got, also diff --git a/trunk/Documentation/usb/dma.txt b/trunk/Documentation/usb/dma.txt index cfdcd16e3abf..e8b50b7de9d9 100644 --- a/trunk/Documentation/usb/dma.txt +++ b/trunk/Documentation/usb/dma.txt @@ -6,9 +6,8 @@ in the kernel usb programming guide (kerneldoc, from the source code). API OVERVIEW The big picture is that USB drivers can continue to ignore most DMA issues, -though they still must provide DMA-ready buffers (see -Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through -the 2.4 (and earlier) kernels. +though they still must provide DMA-ready buffers (see DMA-mapping.txt). +That's how they've worked through the 2.4 (and earlier) kernels. OR: they can now be DMA-aware. @@ -63,8 +62,8 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and - "streaming" DMA mappings.) + Documentation/DMA-mapping.txt for definitions of "coherent" and "streaming" + DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably space-efficient. @@ -94,7 +93,7 @@ WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?") +of DMA-mapping.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/trunk/Documentation/usb/power-management.txt b/trunk/Documentation/usb/power-management.txt index ad642615ad4c..e48ea1d51010 100644 --- a/trunk/Documentation/usb/power-management.txt +++ b/trunk/Documentation/usb/power-management.txt @@ -313,13 +313,11 @@ three of the methods listed above. In addition, a driver indicates that it supports autosuspend by setting the .supports_autosuspend flag in its usb_driver structure. It is then responsible for informing the USB core whenever one of its interfaces becomes busy or idle. The -driver does so by calling these five functions: +driver does so by calling these three functions: int usb_autopm_get_interface(struct usb_interface *intf); void usb_autopm_put_interface(struct usb_interface *intf); int usb_autopm_set_interface(struct usb_interface *intf); - int usb_autopm_get_interface_async(struct usb_interface *intf); - void usb_autopm_put_interface_async(struct usb_interface *intf); The functions work by maintaining a counter in the usb_interface structure. When intf->pm_usage_count is > 0 then the interface is @@ -332,12 +330,10 @@ associated with the device itself rather than any of its interfaces. This field is used only by the USB core.) The driver owns intf->pm_usage_count; it can modify the value however -and whenever it likes. A nice aspect of the non-async usb_autopm_* -routines is that the changes they make are protected by the usb_device -structure's PM mutex (udev->pm_mutex); however drivers may change -pm_usage_count without holding the mutex. Drivers using the async -routines are responsible for their own synchronization and mutual -exclusion. +and whenever it likes. A nice aspect of the usb_autopm_* routines is +that the changes they make are protected by the usb_device structure's +PM mutex (udev->pm_mutex); however drivers may change pm_usage_count +without holding the mutex. usb_autopm_get_interface() increments pm_usage_count and attempts an autoresume if the new value is > 0 and the @@ -352,14 +348,6 @@ exclusion. is suspended, and it attempts an autosuspend if the value is <= 0 and the device isn't suspended. - usb_autopm_get_interface_async() and - usb_autopm_put_interface_async() do almost the same things as - their non-async counterparts. The differences are: they do - not acquire the PM mutex, and they use a workqueue to do their - jobs. As a result they can be called in an atomic context, - such as an URB's completion handler, but when they return the - device will not generally not yet be in the desired state. - There also are a couple of utility routines drivers can use: usb_autopm_enable() sets pm_usage_cnt to 0 and then calls diff --git a/trunk/Documentation/vm/unevictable-lru.txt b/trunk/Documentation/vm/unevictable-lru.txt index 0706a7282a8c..125eed560e5a 100644 --- a/trunk/Documentation/vm/unevictable-lru.txt +++ b/trunk/Documentation/vm/unevictable-lru.txt @@ -137,6 +137,13 @@ shrink_page_list() where they will be detected when vmscan walks the reverse map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list() will cull the page at that point. +Note that for anonymous pages, shrink_page_list() attempts to add the page to +the swap cache before it tries to unmap the page. To avoid this unnecessary +consumption of swap space, shrink_page_list() calls try_to_munlock() to check +whether any VM_LOCKED vmas map the page without attempting to unmap the page. +If try_to_munlock() returns SWAP_MLOCK, shrink_page_list() will cull the page +without consuming swap space. try_to_munlock() will be described below. + To "cull" an unevictable page, vmscan simply puts the page back on the lru list using putback_lru_page()--the inverse operation to isolate_lru_page()-- after dropping the page lock. Because the condition which makes the page @@ -183,8 +190,8 @@ several places: in the VM_LOCKED flag being set for the vma. 3) in the fault path, if mlocked pages are "culled" in the fault path, and when a VM_LOCKED stack segment is expanded. -4) as mentioned above, in vmscan:shrink_page_list() when attempting to - reclaim a page in a VM_LOCKED vma via try_to_unmap(). +4) as mentioned above, in vmscan:shrink_page_list() with attempting to + reclaim a page in a VM_LOCKED vma--via try_to_unmap() or try_to_munlock(). Mlocked pages become unlocked and rescued from the unevictable list when: @@ -253,9 +260,9 @@ mlock_fixup() filters several classes of "special" vmas: 2) vmas mapping hugetlbfs page are already effectively pinned into memory. We don't need nor want to mlock() these pages. However, to preserve the - prior behavior of mlock()--before the unevictable/mlock changes-- - mlock_fixup() will call make_pages_present() in the hugetlbfs vma range - to allocate the huge pages and populate the ptes. + prior behavior of mlock()--before the unevictable/mlock changes--mlock_fixup() + will call make_pages_present() in the hugetlbfs vma range to allocate the + huge pages and populate the ptes. 3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of kernel pages, such as the vdso page, relay channel pages, etc. These pages @@ -315,7 +322,7 @@ __mlock_vma_pages_range()--the same function used to mlock a vma range-- passing a flag to indicate that munlock() is being performed. Because the vma access protections could have been changed to PROT_NONE after -faulting in and mlocking pages, get_user_pages() was unreliable for visiting +faulting in and mlocking some pages, get_user_pages() was unreliable for visiting these pages for munlocking. Because we don't want to leave pages mlocked(), get_user_pages() was enhanced to accept a flag to ignore the permissions when fetching the pages--all of which should be resident as a result of previous @@ -409,8 +416,8 @@ Mlocked Pages: munmap()/exit()/exec() System Call Handling When unmapping an mlocked region of memory, whether by an explicit call to munmap() or via an internal unmap from exit() or exec() processing, we must munlock the pages if we're removing the last VM_LOCKED vma that maps the pages. -Before the unevictable/mlock changes, mlocking did not mark the pages in any -way, so unmapping them required no processing. +Before the unevictable/mlock changes, mlocking did not mark the pages in any way, +so unmapping them required no processing. To munlock a range of memory under the unevictable/mlock infrastructure, the munmap() hander and task address space tear down function call @@ -510,10 +517,12 @@ couldn't be mlocked. Mlocked pages: try_to_munlock() Reverse Map Scan TODO/FIXME: a better name might be page_mlocked()--analogous to the -page_referenced() reverse map walker. +page_referenced() reverse map walker--especially if we continue to call this +from shrink_page_list(). See related TODO/FIXME below. -When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall() -System Call Handling" above--tries to munlock a page, it needs to +When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall() System +Call Handling" above--tries to munlock a page, or when shrink_page_list() +encounters an anonymous page that is not yet in the swap cache, they need to determine whether or not the page is mapped by any VM_LOCKED vma, without actually attempting to unmap all ptes from the page. For this purpose, the unevictable/mlock infrastructure introduced a variant of try_to_unmap() called @@ -526,7 +535,10 @@ for VM_LOCKED vmas. When such a vma is found for anonymous pages and file pages mapped in linear VMAs, as in the try_to_unmap() case, the functions attempt to acquire the associated mmap semphore, mlock the page via mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the -pre-clearing of the page's PG_mlocked done by munlock_vma_page. +pre-clearing of the page's PG_mlocked done by munlock_vma_page() and informs +shrink_page_list() that the anonymous page should be culled rather than added +to the swap cache in preparation for a try_to_unmap() that will almost +certainly fail. If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() @@ -545,7 +557,10 @@ However, the scan can terminate when it encounters a VM_LOCKED vma and can successfully acquire the vma's mmap semphore for read and mlock the page. Although try_to_munlock() can be called many [very many!] times when munlock()ing a large region or tearing down a large address space that has been -mlocked via mlockall(), overall this is a fairly rare event. +mlocked via mlockall(), overall this is a fairly rare event. In addition, +although shrink_page_list() calls try_to_munlock() for every anonymous page that +it handles that is not yet in the swap cache, on average anonymous pages will +have very short reverse map lists. Mlocked Page: Page Reclaim in shrink_*_list() @@ -573,8 +588,8 @@ Some examples of these unevictable pages on the LRU lists are: munlock_vma_page() was forced to let the page back on to the normal LRU list for vmscan to handle. -shrink_inactive_list() also culls any unevictable pages that it finds on -the inactive lists, again diverting them to the appropriate zone's unevictable +shrink_inactive_list() also culls any unevictable pages that it finds +on the inactive lists, again diverting them to the appropriate zone's unevictable lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from @@ -582,7 +597,19 @@ the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter, but will pass on to shrink_page_list(). shrink_page_list() again culls obviously unevictable pages that it could -encounter for similar reason to shrink_inactive_list(). Pages mapped into +encounter for similar reason to shrink_inactive_list(). As already discussed, +shrink_page_list() proactively looks for anonymous pages that should have +PG_mlocked set but don't--these would not be detected by page_evictable()--to +avoid adding them to the swap cache unnecessarily. File pages mapped into VM_LOCKED vmas but without PG_mlocked set will make it all the way to -try_to_unmap(). shrink_page_list() will divert them to the unevictable list -when try_to_unmap() returns SWAP_MLOCK, as discussed above. +try_to_unmap(). shrink_page_list() will divert them to the unevictable list when +try_to_unmap() returns SWAP_MLOCK, as discussed above. + +TODO/FIXME: If we can enhance the swap cache to reliably remove entries +with page_count(page) > 2, as long as all ptes are mapped to the page and +not the swap entry, we can probably remove the call to try_to_munlock() in +shrink_page_list() and just remove the page from the swap cache when +try_to_unmap() returns SWAP_MLOCK. Currently, remove_exclusive_swap_page() +doesn't seem to allow that. + + diff --git a/trunk/Documentation/w1/masters/00-INDEX b/trunk/Documentation/w1/masters/00-INDEX index d63fa024ac05..7b0ceaaad7af 100644 --- a/trunk/Documentation/w1/masters/00-INDEX +++ b/trunk/Documentation/w1/masters/00-INDEX @@ -4,7 +4,5 @@ ds2482 - The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses. ds2490 - The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges. -mxc_w1 - - W1 master controller driver found on Freescale MX2/MX3 SoCs w1-gpio - GPIO 1-wire bus master driver. diff --git a/trunk/Documentation/w1/masters/mxc-w1 b/trunk/Documentation/w1/masters/mxc-w1 deleted file mode 100644 index 97f6199a7f39..000000000000 --- a/trunk/Documentation/w1/masters/mxc-w1 +++ /dev/null @@ -1,11 +0,0 @@ -Kernel driver mxc_w1 -==================== - -Supported chips: - * Freescale MX27, MX31 and probably other i.MX SoCs - Datasheets: - http://www.freescale.com/files/32bit/doc/data_sheet/MCIMX31.pdf?fpsp=1 - http://www.freescale.com/files/dsp/MCIMX27.pdf?fpsp=1 - -Author: Originally based on Freescale code, prepared for mainline by - Sascha Hauer diff --git a/trunk/Documentation/w1/w1.netlink b/trunk/Documentation/w1/w1.netlink index 804445f745ed..3640c7c87d45 100644 --- a/trunk/Documentation/w1/w1.netlink +++ b/trunk/Documentation/w1/w1.netlink @@ -5,157 +5,69 @@ Message types. ============= There are three types of messages between w1 core and userspace: -1. Events. They are generated each time new master or slave device - found either due to automatic or requested search. -2. Userspace commands. +1. Events. They are generated each time new master or slave device found + either due to automatic or requested search. +2. Userspace commands. Includes read/write and search/alarm search comamnds. 3. Replies to userspace commands. Protocol. ======== -[struct cn_msg] - connector header. - Its length field is equal to size of the attached data +[struct cn_msg] - connector header. It's length field is equal to size of the attached data. [struct w1_netlink_msg] - w1 netlink header. __u8 type - message type. - W1_LIST_MASTERS - list current bus masters - W1_SLAVE_ADD/W1_SLAVE_REMOVE - slave add/remove events - W1_MASTER_ADD/W1_MASTER_REMOVE - master add/remove events - W1_MASTER_CMD - userspace command for bus master - device (search/alarm search) - W1_SLAVE_CMD - userspace command for slave device - (read/write/touch) + W1_SLAVE_ADD/W1_SLAVE_REMOVE - slave add/remove events. + W1_MASTER_ADD/W1_MASTER_REMOVE - master add/remove events. + W1_MASTER_CMD - userspace command for bus master device (search/alarm search). + W1_SLAVE_CMD - userspace command for slave device (read/write/ search/alarm search + for bus master device where given slave device found). __u8 res - reserved - __u16 len - size of data attached to this header data + __u16 len - size of attached to this header data. union { - __u8 id[8]; - slave unique device id + __u8 id; - slave unique device id struct w1_mst { - __u32 id; - master's id + __u32 id; - master's id. __u32 res; - reserved } mst; } id; -[struct w1_netlink_cmd] - command for given master or slave device. +[strucrt w1_netlink_cmd] - command for gived master or slave device. __u8 cmd - command opcode. - W1_CMD_READ - read command - W1_CMD_WRITE - write command - W1_CMD_TOUCH - touch command - (write and sample data back to userspace) - W1_CMD_SEARCH - search command - W1_CMD_ALARM_SEARCH - alarm search command + W1_CMD_READ - read command. + W1_CMD_WRITE - write command. + W1_CMD_SEARCH - search command. + W1_CMD_ALARM_SEARCH - alarm search command. __u8 res - reserved - __u16 len - length of data for this command - For read command data must be allocated like for write command - __u8 data[0] - data for this command + __u16 len - length of data for this command. + For read command data must be allocated like for write command. + __u8 data[0] - data for this command. -Each connector message can include one or more w1_netlink_msg with -zero or more attached w1_netlink_cmd messages. +Each connector message can include one or more w1_netlink_msg with zero of more attached w1_netlink_cmd messages. -For event messages there are no w1_netlink_cmd embedded structures, -only connector header and w1_netlink_msg strucutre with "len" field -being zero and filled type (one of event types) and id: -either 8 bytes of slave unique id in host order, -or master's id, which is assigned to bus master device -when it is added to w1 core. - -Currently replies to userspace commands are only generated for read -command request. One reply is generated exactly for one w1_netlink_cmd -read request. Replies are not combined when sent - i.e. typical reply -messages looks like the following: +For event messages there are no w1_netlink_cmd embedded structures, only connector header +and w1_netlink_msg strucutre with "len" field being zero and filled type (one of event types) +and id - either 8 bytes of slave unique id in host order, or master's id, which is assigned +to bus master device when it is added to w1 core. +Currently replies to userspace commands are only generated for read command request. +One reply is generated exactly for one w1_netlink_cmd read request. +Replies are not combined when sent - i.e. typical reply messages looks like the following: [cn_msg][w1_netlink_msg][w1_netlink_cmd] -cn_msg.len = sizeof(struct w1_netlink_msg) + - sizeof(struct w1_netlink_cmd) + - cmd->len; +cn_msg.len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd) + cmd->len; w1_netlink_msg.len = sizeof(struct w1_netlink_cmd) + cmd->len; w1_netlink_cmd.len = cmd->len; -Replies to W1_LIST_MASTERS should send a message back to the userspace -which will contain list of all registered master ids in the following -format: - - cn_msg (CN_W1_IDX.CN_W1_VAL as id, len is equal to sizeof(struct - w1_netlink_msg) plus number of masters multipled by 4) - w1_netlink_msg (type: W1_LIST_MASTERS, len is equal to - number of masters multiplied by 4 (u32 size)) - id0 ... idN - - Each message is at most 4k in size, so if number of master devices - exceeds this, it will be split into several messages, - cn.seq will be increased for each one. - -W1 search and alarm search commands. -request: -[cn_msg] - [w1_netlink_msg type = W1_MASTER_CMD - id is equal to the bus master id to use for searching] - [w1_netlink_cmd cmd = W1_CMD_SEARCH or W1_CMD_ALARM_SEARCH] - -reply: - [cn_msg, ack = 1 and increasing, 0 means the last message, - seq is equal to the request seq] - [w1_netlink_msg type = W1_MASTER_CMD] - [w1_netlink_cmd cmd = W1_CMD_SEARCH or W1_CMD_ALARM_SEARCH - len is equal to number of IDs multiplied by 8] - [64bit-id0 ... 64bit-idN] -Length in each header corresponds to the size of the data behind it, so -w1_netlink_cmd->len = N * 8; where N is number of IDs in this message. - Can be zero. -w1_netlink_msg->len = sizeof(struct w1_netlink_cmd) + N * 8; -cn_msg->len = sizeof(struct w1_netlink_msg) + - sizeof(struct w1_netlink_cmd) + - N*8; - -W1 reset command. -[cn_msg] - [w1_netlink_msg type = W1_MASTER_CMD - id is equal to the bus master id to use for searching] - [w1_netlink_cmd cmd = W1_CMD_RESET] - - -Command status replies. -====================== - -Each command (either root, master or slave with or without w1_netlink_cmd -structure) will be 'acked' by the w1 core. Format of the reply is the same -as request message except that length parameters do not account for data -requested by the user, i.e. read/write/touch IO requests will not contain -data, so w1_netlink_cmd.len will be 0, w1_netlink_msg.len will be size -of the w1_netlink_cmd structure and cn_msg.len will be equal to the sum -of the sizeof(struct w1_netlink_msg) and sizeof(struct w1_netlink_cmd). -If reply is generated for master or root command (which do not have -w1_netlink_cmd attached), reply will contain only cn_msg and w1_netlink_msg -structires. - -w1_netlink_msg.status field will carry positive error value -(EINVAL for example) or zero in case of success. - -All other fields in every structure will mirror the same parameters in the -request message (except lengths as described above). - -Status reply is generated for every w1_netlink_cmd embedded in the -w1_netlink_msg, if there are no w1_netlink_cmd structures, -reply will be generated for the w1_netlink_msg. - -All w1_netlink_cmd command structures are handled in every w1_netlink_msg, -even if there were errors, only length mismatch interrupts message processing. - Operation steps in w1 core when new command is received. ======================================================= -When new message (w1_netlink_msg) is received w1 core detects if it is -master or slave request, according to w1_netlink_msg.type field. +When new message (w1_netlink_msg) is received w1 core detects if it is master of slave request, +according to w1_netlink_msg.type field. Then master or slave device is searched for. -When found, master device (requested or those one on where slave device -is found) is locked. If slave command is requested, then reset/select -procedure is started to select given device. +When found, master device (requested or those one on where slave device is found) is locked. +If slave command is requested, then reset/select procedure is started to select given device. Then all requested in w1_netlink_msg operations are performed one by one. If command requires reply (like read command) it is sent on command completion. @@ -170,8 +82,8 @@ Connector [1] specific documentation. Each connector message includes two u32 fields as "address". w1 uses CN_W1_IDX and CN_W1_VAL defined in include/linux/connector.h header. Each message also includes sequence and acknowledge numbers. -Sequence number for event messages is appropriate bus master sequence number -increased with each event message sent "through" this master. +Sequence number for event messages is appropriate bus master sequence number increased with +each event message sent "through" this master. Sequence number for userspace requests is set by userspace application. Sequence number for reply is the same as was in request, and acknowledge number is set to seq+1. @@ -181,6 +93,6 @@ Additional documantion, source code examples. ============================================ 1. Documentation/connector -2. http://www.ioremap.net/archive/w1 -This archive includes userspace application w1d.c which uses -read/write/search commands for all master/slave devices found on the bus. +2. http://tservice.net.ru/~s0mbre/archive/w1 +This archive includes userspace application w1d.c which +uses read/write/search commands for all master/slave devices found on the bus. diff --git a/trunk/Documentation/wimax/README.i2400m b/trunk/Documentation/wimax/README.i2400m deleted file mode 100644 index 7dffd8919cb0..000000000000 --- a/trunk/Documentation/wimax/README.i2400m +++ /dev/null @@ -1,260 +0,0 @@ - - Driver for the Intel Wireless Wimax Connection 2400m - - (C) 2008 Intel Corporation < linux-wimax@intel.com > - - This provides a driver for the Intel Wireless WiMAX Connection 2400m - and a basic Linux kernel WiMAX stack. - -1. Requirements - - * Linux installation with Linux kernel 2.6.22 or newer (if building - from a separate tree) - * Intel i2400m Echo Peak or Baxter Peak; this includes the Intel - Wireless WiMAX/WiFi Link 5x50 series. - * build tools: - + Linux kernel development package for the target kernel; to - build against your currently running kernel, you need to have - the kernel development package corresponding to the running - image installed (usually if your kernel is named - linux-VERSION, the development package is called - linux-dev-VERSION or linux-headers-VERSION). - + GNU C Compiler, make - -2. Compilation and installation - -2.1. Compilation of the drivers included in the kernel - - Configure the kernel; to enable the WiMAX drivers select Drivers > - Networking Drivers > WiMAX device support. Enable all of them as - modules (easier). - - If USB or SDIO are not enabled in the kernel configuration, the options - to build the i2400m USB or SDIO drivers will not show. Enable said - subsystems and go back to the WiMAX menu to enable the drivers. - - Compile and install your kernel as usual. - -2.2. Compilation of the drivers distributed as an standalone module - - To compile - -$ cd source/directory -$ make - - Once built you can load and unload using the provided load.sh script; - load.sh will load the modules, load.sh u will unload them. - - To install in the default kernel directories (and enable auto loading - when the device is plugged): - -$ make install -$ depmod -a - - If your kernel development files are located in a non standard - directory or if you want to build for a kernel that is not the - currently running one, set KDIR to the right location: - -$ make KDIR=/path/to/kernel/dev/tree - - For more information, please contact linux-wimax@intel.com. - -3. Installing the firmware - - The firmware can be obtained from http://linuxwimax.org or might have - been supplied with your hardware. - - It has to be installed in the target system: - * -$ cp FIRMWAREFILE.sbcf /lib/firmware/i2400m-fw-BUSTYPE-1.3.sbcf - - * NOTE: if your firmware came in an .rpm or .deb file, just install - it as normal, with the rpm (rpm -i FIRMWARE.rpm) or dpkg - (dpkg -i FIRMWARE.deb) commands. No further action is needed. - * BUSTYPE will be usb or sdio, depending on the hardware you have. - Each hardware type comes with its own firmware and will not work - with other types. - -4. Design - - This package contains two major parts: a WiMAX kernel stack and a - driver for the Intel i2400m. - - The WiMAX stack is designed to provide for common WiMAX control - services to current and future WiMAX devices from any vendor; please - see README.wimax for details. - - The i2400m kernel driver is broken up in two main parts: the bus - generic driver and the bus-specific drivers. The bus generic driver - forms the drivercore and contain no knowledge of the actual method we - use to connect to the device. The bus specific drivers are just the - glue to connect the bus-generic driver and the device. Currently only - USB and SDIO are supported. See drivers/net/wimax/i2400m/i2400m.h for - more information. - - The bus generic driver is logically broken up in two parts: OS-glue and - hardware-glue. The OS-glue interfaces with Linux. The hardware-glue - interfaces with the device on using an interface provided by the - bus-specific driver. The reason for this breakup is to be able to - easily reuse the hardware-glue to write drivers for other OSes; note - the hardware glue part is written as a native Linux driver; no - abstraction layers are used, so to port to another OS, the Linux kernel - API calls should be replaced with the target OS's. - -5. Usage - - To load the driver, follow the instructions in the install section; - once the driver is loaded, plug in the device (unless it is permanently - plugged in). The driver will enumerate the device, upload the firmware - and output messages in the kernel log (dmesg, /var/log/messages or - /var/log/kern.log) such as: - -... -i2400m_usb 5-4:1.0: firmware interface version 8.0.0 -i2400m_usb 5-4:1.0: WiMAX interface wmx0 (00:1d:e1:01:94:2c) ready - - At this point the device is ready to work. - - Current versions require the Intel WiMAX Network Service in userspace - to make things work. See the network service's README for instructions - on how to scan, connect and disconnect. - -5.1. Module parameters - - Module parameters can be set at kernel or module load time or by - echoing values: - -$ echo VALUE > /sys/module/MODULENAME/parameters/PARAMETERNAME - - To make changes permanent, for example, for the i2400m module, you can - also create a file named /etc/modprobe.d/i2400m containing: - -options i2400m idle_mode_disabled=1 - - To find which parameters are supported by a module, run: - -$ modinfo path/to/module.ko - - During kernel bootup (if the driver is linked in the kernel), specify - the following to the kernel command line: - -i2400m.PARAMETER=VALUE - -5.1.1. i2400m: idle_mode_disabled - - The i2400m module supports a parameter to disable idle mode. This - parameter, once set, will take effect only when the device is - reinitialized by the driver (eg: following a reset or a reconnect). - -5.2. Debug operations: debugfs entries - - The driver will register debugfs entries that allow the user to tweak - debug settings. There are three main container directories where - entries are placed, which correspond to the three blocks a i2400m WiMAX - driver has: - * /sys/kernel/debug/wimax:DEVNAME/ for the generic WiMAX stack - controls - * /sys/kernel/debug/wimax:DEVNAME/i2400m for the i2400m generic - driver controls - * /sys/kernel/debug/wimax:DEVNAME/i2400m-usb (or -sdio) for the - bus-specific i2400m-usb or i2400m-sdio controls). - - Of course, if debugfs is mounted in a directory other than - /sys/kernel/debug, those paths will change. - -5.2.1. Increasing debug output - - The files named *dl_* indicate knobs for controlling the debug output - of different submodules: - * -# find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\* -/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_tx -/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_rx -/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_notif -/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_fw -/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_usb -/sys/kernel/debug/wimax:wmx0/i2400m/dl_tx -/sys/kernel/debug/wimax:wmx0/i2400m/dl_rx -/sys/kernel/debug/wimax:wmx0/i2400m/dl_rfkill -/sys/kernel/debug/wimax:wmx0/i2400m/dl_netdev -/sys/kernel/debug/wimax:wmx0/i2400m/dl_fw -/sys/kernel/debug/wimax:wmx0/i2400m/dl_debugfs -/sys/kernel/debug/wimax:wmx0/i2400m/dl_driver -/sys/kernel/debug/wimax:wmx0/i2400m/dl_control -/sys/kernel/debug/wimax:wmx0/wimax_dl_stack -/sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill -/sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset -/sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg -/sys/kernel/debug/wimax:wmx0/wimax_dl_id_table -/sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs - - By reading the file you can obtain the current value of said debug - level; by writing to it, you can set it. - - To increase the debug level of, for example, the i2400m's generic TX - engine, just write: - -$ echo 3 > /sys/kernel/debug/wimax:wmx0/i2400m/dl_tx - - Increasing numbers yield increasing debug information; for details of - what is printed and the available levels, check the source. The code - uses 0 for disabled and increasing values until 8. - -5.2.2. RX and TX statistics - - The i2400m/rx_stats and i2400m/tx_stats provide statistics about the - data reception/delivery from the device: - -$ cat /sys/kernel/debug/wimax:wmx0/i2400m/rx_stats -45 1 3 34 3104 48 480 - - The numbers reported are - * packets/RX-buffer: total, min, max - * RX-buffers: total RX buffers received, accumulated RX buffer size - in bytes, min size received, max size received - - Thus, to find the average buffer size received, divide accumulated - RX-buffer / total RX-buffers. - - To clear the statistics back to 0, write anything to the rx_stats file: - -$ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m_rx_stats - - Likewise for TX. - - Note the packets this debug file refers to are not network packet, but - packets in the sense of the device-specific protocol for communication - to the host. See drivers/net/wimax/i2400m/tx.c. - -5.2.3. Tracing messages received from user space - - To echo messages received from user space into the trace pipe that the - i2400m driver creates, set the debug file i2400m/trace_msg_from_user to - 1: - * -$ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m/trace_msg_from_user - -5.2.4. Performing a device reset - - By writing a 0, a 1 or a 2 to the file - /sys/kernel/debug/wimax:wmx0/reset, the driver performs a warm (without - disconnecting from the bus), cold (disconnecting from the bus) or bus - (bus specific) reset on the device. - -5.2.5. Asking the device to enter power saving mode - - By writing any value to the /sys/kernel/debug/wimax:wmx0 file, the - device will attempt to enter power saving mode. - -6. Troubleshooting - -6.1. Driver complains about 'i2400m-fw-usb-1.2.sbcf: request failed' - - If upon connecting the device, the following is output in the kernel - log: - -i2400m_usb 5-4:1.0: fw i2400m-fw-usb-1.3.sbcf: request failed: -2 - - This means that the driver cannot locate the firmware file named - /lib/firmware/i2400m-fw-usb-1.2.sbcf. Check that the file is present in - the right location. diff --git a/trunk/Documentation/wimax/README.wimax b/trunk/Documentation/wimax/README.wimax deleted file mode 100644 index b78c4378084e..000000000000 --- a/trunk/Documentation/wimax/README.wimax +++ /dev/null @@ -1,81 +0,0 @@ - - Linux kernel WiMAX stack - - (C) 2008 Intel Corporation < linux-wimax@intel.com > - - This provides a basic Linux kernel WiMAX stack to provide a common - control API for WiMAX devices, usable from kernel and user space. - -1. Design - - The WiMAX stack is designed to provide for common WiMAX control - services to current and future WiMAX devices from any vendor. - - Because currently there is only one and we don't know what would be the - common services, the APIs it currently provides are very minimal. - However, it is done in such a way that it is easily extensible to - accommodate future requirements. - - The stack works by embedding a struct wimax_dev in your device's - control structures. This provides a set of callbacks that the WiMAX - stack will call in order to implement control operations requested by - the user. As well, the stack provides API functions that the driver - calls to notify about changes of state in the device. - - The stack exports the API calls needed to control the device to user - space using generic netlink as a marshalling mechanism. You can access - them using your own code or use the wrappers provided for your - convenience in libwimax (in the wimax-tools package). - - For detailed information on the stack, please see - include/linux/wimax.h. - -2. Usage - - For usage in a driver (registration, API, etc) please refer to the - instructions in the header file include/linux/wimax.h. - - When a device is registered with the WiMAX stack, a set of debugfs - files will appear in /sys/kernel/debug/wimax:wmxX can tweak for - control. - -2.1. Obtaining debug information: debugfs entries - - The WiMAX stack is compiled, by default, with debug messages that can - be used to diagnose issues. By default, said messages are disabled. - - The drivers will register debugfs entries that allow the user to tweak - debug settings. - - Each driver, when registering with the stack, will cause a debugfs - directory named wimax:DEVICENAME to be created; optionally, it might - create more subentries below it. - -2.1.1. Increasing debug output - - The files named *dl_* indicate knobs for controlling the debug output - of different submodules of the WiMAX stack: - * -# find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\* -/sys/kernel/debug/wimax:wmx0/wimax_dl_stack -/sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill -/sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset -/sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg -/sys/kernel/debug/wimax:wmx0/wimax_dl_id_table -/sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs -/sys/kernel/debug/wimax:wmx0/.... # other driver specific files - - NOTE: Of course, if debugfs is mounted in a directory other than - /sys/kernel/debug, those paths will change. - - By reading the file you can obtain the current value of said debug - level; by writing to it, you can set it. - - To increase the debug level of, for example, the id-table submodule, - just write: - -$ echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_id_table - - Increasing numbers yield increasing debug information; for details of - what is printed and the available levels, check the source. The code - uses 0 for disabled and increasing values until 8. diff --git a/trunk/Documentation/x86/boot.txt b/trunk/Documentation/x86/boot.txt index 7b4596ac4120..fcdc62b3c3d8 100644 --- a/trunk/Documentation/x86/boot.txt +++ b/trunk/Documentation/x86/boot.txt @@ -44,7 +44,7 @@ Protocol 2.07: (Kernel 2.6.24) Added paravirtualised boot protocol. and KEEP_SEGMENTS flag in load_flags. Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format - payload. Introduced payload_offset and payload_length + payload. Introduced payload_offset and payload length fields to aid in locating the payload. Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical diff --git a/trunk/Documentation/x86/zero-page.txt b/trunk/Documentation/x86/zero-page.txt index 4f913857b8a2..169ad423a3d1 100644 --- a/trunk/Documentation/x86/zero-page.txt +++ b/trunk/Documentation/x86/zero-page.txt @@ -3,7 +3,7 @@ protocol of kernel. These should be filled by bootloader or 16-bit real-mode setup code of the kernel. References/settings to it mainly are in: - arch/x86/include/asm/bootparam.h + include/asm-x86/bootparam.h Offset Proto Name Meaning diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 474ec0c53272..141aff67bd6d 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -616,7 +616,7 @@ M: mkpetch@internode.on.net S: Maintained ARM/TOSA MACHINE SUPPORT -P: Dmitry Eremin-Solenikov +P: Dmitry Baryshkov M: dbaryshkov@gmail.com P: Dirk Opfer M: dirk@opfer-online.de @@ -1024,17 +1024,16 @@ S: Maintained BTTV VIDEO4LINUX DRIVER P: Mauro Carvalho Chehab M: mchehab@infradead.org -L: linux-media@vger.kernel.org +M: v4l-dvb-maintainer@linuxtv.org L: video4linux-list@redhat.com W: http://linuxtv.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git S: Maintained CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER P: Jonathan Corbet M: corbet@lwn.net -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained CALGARY x86-64 IOMMU @@ -1093,8 +1092,11 @@ S: Maintained CHECKPATCH P: Andy Whitcroft -M: apw@canonical.com -L: linux-kernel@vger.kernel.org +M: apw@shadowen.org +P: Randy Dunlap +M: rdunlap@xenotime.net +P: Joel Schopp +M: jschopp@austin.ibm.com S: Supported CISCO 10G ETHERNET DRIVER @@ -1262,8 +1264,7 @@ P: Hans Verkuil, Andy Walls M: hverkuil@xs4all.nl, awalls@radix.net L: ivtv-devel@ivtvdriver.org L: ivtv-users@ivtvdriver.org -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://linuxtv.org S: Maintained @@ -1360,11 +1361,6 @@ P: Maciej W. Rozycki M: macro@linux-mips.org S: Maintained -DELL LAPTOP DRIVER -P: Matthew Garrett -M: mjg59@srcf.ucam.org -S: Maintained - DELL LAPTOP SMM DRIVER P: Massimo Dal Zotto M: dz@debian.org @@ -1494,10 +1490,10 @@ S: Maintained DVB SUBSYSTEM AND DRIVERS P: LinuxTV.org Project -M: linux-media@vger.kernel.org +M: v4l-dvb-maintainer@linuxtv.org L: linux-dvb@linuxtv.org (subscription required) W: http://linuxtv.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git S: Maintained DZ DECSTATION DZ11 SERIAL DRIVER @@ -1581,13 +1577,6 @@ L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained -EDAC-I5400 -P: Mauro Carvalho Chehab -M: mchehab@redhat.com -L: bluesmoke-devel@lists.sourceforge.net -W: bluesmoke.sourceforge.net -S: Maintained - EDAC-I82975X P: Ranganathan Desikan P: Arvind R. @@ -1821,14 +1810,6 @@ M: hch@infradead.org W: ftp://ftp.openlinux.org/pub/people/hch/vxfs S: Maintained -FREEZER -P: Pavel Machek -M: pavel@suse.cz -P: Rafael J. Wysocki -M: rjw@sisk.pl -L: linux-pm@lists.linux-foundation.org -S: Supported - FTRACE P: Steven Rostedt M: rostedt@goodmis.org @@ -1904,37 +1885,32 @@ S: Maintained GSPCA FINEPIX SUBDRIVER P: Frank Zago M: frank@zago.net -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained GSPCA M5602 SUBDRIVER P: Erik Andren M: erik.andren@gmail.com -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained GSPCA PAC207 SONIXB SUBDRIVER P: Hans de Goede M: hdegoede@redhat.com -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained GSPCA T613 SUBDRIVER P: Leandro Costantino M: lcostantino@gmail.com -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained GSPCA USB WEBCAM DRIVER P: Jean-Francois Moine M: moinejf@free.fr W: http://moinejf.free.fr -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained HARDWARE MONITORING @@ -2102,8 +2078,7 @@ M: khali@linux-fr.org P: Ben Dooks (embedded platforms) M: ben-linux@fluff.org L: linux-i2c@vger.kernel.org -W: http://i2c.wiki.kernel.org/ -T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ +T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/ S: Maintained I2C-TINY-USB DRIVER @@ -2333,14 +2308,6 @@ W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel W: http://ipw2200.sourceforge.net S: Supported -INTEL WIRELESS WIMAX CONNECTION 2400 -P: Inaky Perez-Gonzalez -M: inaky.perez-gonzalez@intel.com -M: linux-wimax@intel.com -L: wimax@linuxwimax.org -S: Supported -W: http://linuxwimax.org - INTEL WIRELESS WIFI LINK (iwlwifi) P: Zhu Yi M: yi.zhu@intel.com @@ -2465,8 +2432,7 @@ P: Hans Verkuil M: hverkuil@xs4all.nl L: ivtv-devel@ivtvdriver.org L: ivtv-users@ivtvdriver.org -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://www.ivtvdriver.org S: Maintained @@ -2836,6 +2802,8 @@ S: Maintained MAC80211 P: Johannes Berg M: johannes@sipsolutions.net +P: Michael Wu +M: flamingice@sourmilk.net L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git @@ -3017,7 +2985,6 @@ MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER P: Felipe Balbi M: felipe.balbi@nokia.com L: linux-usb@vger.kernel.org -T: git gitorious.org:/musb/mainline.git S: Maintained MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) @@ -3224,8 +3191,7 @@ S: Maintained OMNIVISION OV7670 SENSOR DRIVER P: Jonathan Corbet M: corbet@lwn.net -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained ONENAND FLASH DRIVER @@ -3503,19 +3469,12 @@ L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org S: Supported -PS3VRAM DRIVER -P: Jim Paris -M: jim@jtan.com -L: cbe-oss-dev@ozlabs.org -S: Maintained - PVRUSB2 VIDEO4LINUX DRIVER P: Mike Isely M: isely@pobox.com L: pvrusb2@isely.net (subscribers-only) -L: linux-media@vger.kernel.org +L: video4linux-list@redhat.com W: http://www.isely.net/pvrusb2/ -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained PXA2xx/PXA3xx SUPPORT @@ -3735,8 +3694,6 @@ S: Supported SAA7146 VIDEO4LINUX-2 DRIVER P: Michael Hunold M: michael@mihu.de -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.mihu.de/linux/saa7146 S: Maintained @@ -4000,8 +3957,7 @@ S: Maintained SOC-CAMERA V4L2 SUBSYSTEM P: Guennadi Liakhovetski M: g.liakhovetski@gmx.de -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com S: Maintained SOEKRIS NET48XX LED SUPPORT @@ -4095,13 +4051,6 @@ L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ S: Supported -SQUASHFS FILE SYSTEM -P: Phillip Lougher -M: phillip@lougher.demon.co.uk -L: squashfs-devel@lists.sourceforge.net (subscribers-only) -W: http://squashfs.org.uk -S: Maintained - SRM (Alpha) environment access P: Jan-Benedict Glaw M: jbglaw@lug-owl.de @@ -4283,10 +4232,9 @@ L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained TRIVIAL PATCHES -P: Jiri Kosina +P: Jesper Juhl M: trivial@kernel.org L: linux-kernel@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jikos/trivial.git S: Maintained TTY LAYER @@ -4427,8 +4375,7 @@ USB ET61X[12]51 DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4577,8 +4524,7 @@ USB SN9C1xx DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4607,8 +4553,7 @@ USB VIDEO CLASS P: Laurent Pinchart M: laurent.pinchart@skynet.be L: linux-uvc-devel@lists.berlios.de (subscribers-only) -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://linux-uvc.berlios.de S: Maintained @@ -4616,8 +4561,7 @@ USB W996[87]CF DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4631,8 +4575,7 @@ USB ZC0301 DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4647,8 +4590,7 @@ USB ZR364XX DRIVER P: Antoine Jacquet M: royale@zerezo.com L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +L: video4linux-list@redhat.com W: http://royale.zerezo.com/zr364xx/ S: Maintained @@ -4717,10 +4659,10 @@ S: Maintained VIDEO FOR LINUX (V4L) P: Mauro Carvalho Chehab M: mchehab@infradead.org -L: linux-media@vger.kernel.org +M: v4l-dvb-maintainer@linuxtv.org L: video4linux-list@redhat.com W: http://linuxtv.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git S: Maintained VLAN (802.1Q) @@ -4793,14 +4735,6 @@ M: zaga@fly.cc.fer.hr L: linux-scsi@vger.kernel.org S: Maintained -WIMAX STACK -P: Inaky Perez-Gonzalez -M: inaky.perez-gonzalez@intel.com -M: linux-wimax@intel.com -L: wimax@linuxwimax.org -S: Supported -W: http://linuxwimax.org - WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM P: David Vrabel M: david.vrabel@csr.com @@ -4856,11 +4790,11 @@ S: Supported XFS FILESYSTEM P: Silicon Graphics Inc -P: Bill O'Donnell +P: Tim Shimmin M: xfs-masters@oss.sgi.com L: xfs@oss.sgi.com W: http://oss.sgi.com/projects/xfs -T: git://oss.sgi.com/xfs/xfs.git +T: git git://oss.sgi.com:8090/xfs/xfs-2.6.git S: Supported XILINX SYSTEMACE DRIVER diff --git a/trunk/Makefile b/trunk/Makefile index 7715b2c14fb4..f9006663f01e 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 29 -EXTRAVERSION = -rc3 +SUBLEVEL = 28 +EXTRAVERSION = NAME = Erotic Pickled Herring # *DOCUMENTATION* @@ -213,10 +213,6 @@ endif # Where to locate arch specific headers hdr-arch := $(SRCARCH) -ifeq ($(ARCH),m68knommu) - hdr-arch := m68k -endif - KCONFIG_CONFIG ?= .config # SHELL used by kbuild @@ -610,20 +606,25 @@ export INSTALL_PATH ?= /boot MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) export MODLIB -# -# INSTALL_MOD_STRIP, if defined, will cause modules to be -# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then -# the default option --strip-debug will be used. Otherwise, -# INSTALL_MOD_STRIP will used as the options to the strip command. +strip-symbols := $(srctree)/scripts/strip-symbols \ + $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols) +# +# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while +# they get installed. If INSTALL_MOD_STRIP is '1', then the default +# options (see below) will be used. Otherwise, INSTALL_MOD_STRIP will +# be used as the option(s) to the objcopy command. ifdef INSTALL_MOD_STRIP ifeq ($(INSTALL_MOD_STRIP),1) -mod_strip_cmd = $(STRIP) --strip-debug +mod_strip_cmd = $(OBJCOPY) --strip-debug +ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED)) +mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols)) +endif else -mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) +mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP) endif # INSTALL_MOD_STRIP=1 else -mod_strip_cmd = true +mod_strip_cmd = false endif # INSTALL_MOD_STRIP export mod_strip_cmd @@ -753,6 +754,7 @@ last_kallsyms := 2 endif kallsyms.o := .tmp_kallsyms$(last_kallsyms).o +kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h) define verify_kallsyms $(Q)$(if $($(quiet)cmd_sysmap), \ @@ -777,24 +779,41 @@ endef # Generate .S file with all kernel symbols quiet_cmd_kallsyms = KSYM $@ - cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ - $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ + cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \ + | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@ -.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE +quiet_cmd_kstrip = STRIP $@ + cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@ + +$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute +$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE $(call if_changed_dep,as_o_S) -.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) +ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y) +strip-ext := .stripped +endif + +.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h) $(call cmd,kallsyms) +# make -jN seems to have problems with intermediate files, see bug #3330. +.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped) +.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h) + $(call cmd,kstrip) + +ifneq ($(CONFIG_DEBUG_INFO),y) +.tmp_vmlinux%: LDFLAGS_vmlinux += -S +endif # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version -.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE - $(call if_changed_rule,ksym_ld) +.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE + $(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__)) -.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE - $(call if_changed,vmlinux__) +.tmp_vmlinux0$(strip-ext): + $(Q)echo "placeholder" >$@ -.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE - $(call if_changed,vmlinux__) +.tmp_vmlinux1: .tmp_kallsyms0.o +.tmp_vmlinux2: .tmp_kallsyms1.o +.tmp_vmlinux3: .tmp_kallsyms2.o # Needs to visit scripts/ before $(KALLSYMS) can be used. $(KALLSYMS): scripts ; @@ -946,7 +965,6 @@ ifneq ($(KBUILD_SRC),) mkdir -p include2; \ ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ fi - ln -fsn $(srctree) source endif # prepare2 creates a makefile if using a separate output directory @@ -990,7 +1008,7 @@ define check-symlink endef # We create the target directory of the symlink if it does -# not exist so the test in check-symlink works and we have a +# not exist so the test in chack-symlink works and we have a # directory for generated filesas used by some architectures. define create-symlink if [ ! -L include/asm ]; then \ diff --git a/trunk/arch/Kconfig b/trunk/arch/Kconfig index 550dab22daa1..2e13aa261929 100644 --- a/trunk/arch/Kconfig +++ b/trunk/arch/Kconfig @@ -62,9 +62,6 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS See Documentation/unaligned-memory-access.txt for more information on the topic of unaligned memory accesses. -config HAVE_SYSCALL_WRAPPERS - bool - config KRETPROBES def_bool y depends on KPROBES && HAVE_KRETPROBES diff --git a/trunk/arch/alpha/Kconfig b/trunk/arch/alpha/Kconfig index 9fb8aae5c391..6110197757a3 100644 --- a/trunk/arch/alpha/Kconfig +++ b/trunk/arch/alpha/Kconfig @@ -8,7 +8,6 @@ config ALPHA select HAVE_AOUT select HAVE_IDE select HAVE_OPROFILE - select HAVE_SYSCALL_WRAPPERS help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/trunk/arch/alpha/include/asm/atomic.h b/trunk/arch/alpha/include/asm/atomic.h index 62b363584b2b..ca88e54dec93 100644 --- a/trunk/arch/alpha/include/asm/atomic.h +++ b/trunk/arch/alpha/include/asm/atomic.h @@ -1,7 +1,6 @@ #ifndef _ALPHA_ATOMIC_H #define _ALPHA_ATOMIC_H -#include #include #include @@ -14,6 +13,14 @@ */ +/* + * Counter is volatile to make sure gcc doesn't try to be clever + * and move things around on us. We need to use _exactly_ the address + * the user gave us, not some alias that contains the same information. + */ +typedef struct { volatile int counter; } atomic_t; +typedef struct { volatile long counter; } atomic64_t; + #define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) #define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) diff --git a/trunk/arch/alpha/include/asm/bug.h b/trunk/arch/alpha/include/asm/bug.h index 7b85b7c93709..695a5ee4b5d3 100644 --- a/trunk/arch/alpha/include/asm/bug.h +++ b/trunk/arch/alpha/include/asm/bug.h @@ -8,12 +8,17 @@ /* ??? Would be nice to use .gprel32 here, but we can't be sure that the function loaded the GP, so this could fail in modules. */ -#define BUG() { \ - __asm__ __volatile__( \ - "call_pal %0 # bugchk\n\t" \ - ".long %1\n\t.8byte %2" \ - : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \ - for ( ; ; ); } +static inline void ATTRIB_NORET __BUG(const char *file, int line) +{ + __asm__ __volatile__( + "call_pal %0 # bugchk\n\t" + ".long %1\n\t.8byte %2" + : : "i" (PAL_bugchk), "i"(line), "i"(file)); + for ( ; ; ) + ; +} + +#define BUG() __BUG(__FILE__, __LINE__) #define HAVE_ARCH_BUG #endif diff --git a/trunk/arch/alpha/include/asm/byteorder.h b/trunk/arch/alpha/include/asm/byteorder.h index 73683093202d..58e958fc7f1b 100644 --- a/trunk/arch/alpha/include/asm/byteorder.h +++ b/trunk/arch/alpha/include/asm/byteorder.h @@ -1,6 +1,47 @@ #ifndef _ALPHA_BYTEORDER_H #define _ALPHA_BYTEORDER_H +#include +#include +#include + +#ifdef __GNUC__ + +static inline __attribute_const__ __u32 __arch__swab32(__u32 x) +{ + /* + * Unfortunately, we can't use the 6 instruction sequence + * on ev6 since the latency of the UNPKBW is 3, which is + * pretty hard to hide. Just in case a future implementation + * has a lower latency, here's the sequence (also by Mike Burrows) + * + * UNPKBW a0, v0 v0: 00AA00BB00CC00DD + * SLL v0, 24, a0 a0: BB00CC00DD000000 + * BIS v0, a0, a0 a0: BBAACCBBDDCC00DD + * EXTWL a0, 6, v0 v0: 000000000000BBAA + * ZAP a0, 0xf3, a0 a0: 00000000DDCC0000 + * ADDL a0, v0, v0 v0: ssssssssDDCCBBAA + */ + + __u64 t0, t1, t2, t3; + + t0 = __kernel_inslh(x, 7); /* t0 : 0000000000AABBCC */ + t1 = __kernel_inswl(x, 3); /* t1 : 000000CCDD000000 */ + t1 |= t0; /* t1 : 000000CCDDAABBCC */ + t2 = t1 >> 16; /* t2 : 0000000000CCDDAA */ + t0 = t1 & 0xFF00FF00; /* t0 : 00000000DD00BB00 */ + t3 = t2 & 0x00FF00FF; /* t3 : 0000000000CC00AA */ + t1 = t0 + t3; /* t1 : ssssssssDDCCBBAA */ + + return t1; +} + +#define __arch__swab32 __arch__swab32 + +#endif /* __GNUC__ */ + +#define __BYTEORDER_HAS_U64__ + #include #endif /* _ALPHA_BYTEORDER_H */ diff --git a/trunk/arch/alpha/include/asm/dma-mapping.h b/trunk/arch/alpha/include/asm/dma-mapping.h index 04eb5681448c..a5801ae02e4b 100644 --- a/trunk/arch/alpha/include/asm/dma-mapping.h +++ b/trunk/arch/alpha/include/asm/dma-mapping.h @@ -29,8 +29,6 @@ #else /* no PCI - no IOMMU. */ -#include /* for virt_to_phys() */ - struct scatterlist; void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); diff --git a/trunk/arch/alpha/include/asm/machvec.h b/trunk/arch/alpha/include/asm/machvec.h index fea4ea75b79d..a86c083cdf7f 100644 --- a/trunk/arch/alpha/include/asm/machvec.h +++ b/trunk/arch/alpha/include/asm/machvec.h @@ -21,7 +21,6 @@ struct pci_dev; struct pci_ops; struct pci_controller; struct _alpha_agp_info; -struct rtc_time; struct alpha_machine_vector { @@ -95,9 +94,6 @@ struct alpha_machine_vector struct _alpha_agp_info *(*agp_info)(void); - unsigned int (*rtc_get_time)(struct rtc_time *); - int (*rtc_set_time)(struct rtc_time *); - const char *vector_name; /* NUMA information */ diff --git a/trunk/arch/alpha/include/asm/pgalloc.h b/trunk/arch/alpha/include/asm/pgalloc.h index bc2a0daf2d92..fd090155dccd 100644 --- a/trunk/arch/alpha/include/asm/pgalloc.h +++ b/trunk/arch/alpha/include/asm/pgalloc.h @@ -50,12 +50,7 @@ pmd_free(struct mm_struct *mm, pmd_t *pmd) free_page((unsigned long)pmd); } -static inline pte_t * -pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); - return pte; -} +extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) diff --git a/trunk/arch/alpha/include/asm/rtc.h b/trunk/arch/alpha/include/asm/rtc.h index 1f7fba671ae6..4e854b1333eb 100644 --- a/trunk/arch/alpha/include/asm/rtc.h +++ b/trunk/arch/alpha/include/asm/rtc.h @@ -1,15 +1,9 @@ #ifndef _ALPHA_RTC_H #define _ALPHA_RTC_H -#if defined(CONFIG_ALPHA_GENERIC) -# define get_rtc_time alpha_mv.rtc_get_time -# define set_rtc_time alpha_mv.rtc_set_time -#else -# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) -# define get_rtc_time marvel_get_rtc_time -# define set_rtc_time marvel_set_rtc_time -# endif -#endif +/* + * Alpha uses the default access methods for the RTC. + */ #include diff --git a/trunk/arch/alpha/include/asm/swab.h b/trunk/arch/alpha/include/asm/swab.h deleted file mode 100644 index 68e7089e02d5..000000000000 --- a/trunk/arch/alpha/include/asm/swab.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ALPHA_SWAB_H -#define _ALPHA_SWAB_H - -#include -#include -#include - -#ifdef __GNUC__ - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - /* - * Unfortunately, we can't use the 6 instruction sequence - * on ev6 since the latency of the UNPKBW is 3, which is - * pretty hard to hide. Just in case a future implementation - * has a lower latency, here's the sequence (also by Mike Burrows) - * - * UNPKBW a0, v0 v0: 00AA00BB00CC00DD - * SLL v0, 24, a0 a0: BB00CC00DD000000 - * BIS v0, a0, a0 a0: BBAACCBBDDCC00DD - * EXTWL a0, 6, v0 v0: 000000000000BBAA - * ZAP a0, 0xf3, a0 a0: 00000000DDCC0000 - * ADDL a0, v0, v0 v0: ssssssssDDCCBBAA - */ - - __u64 t0, t1, t2, t3; - - t0 = __kernel_inslh(x, 7); /* t0 : 0000000000AABBCC */ - t1 = __kernel_inswl(x, 3); /* t1 : 000000CCDD000000 */ - t1 |= t0; /* t1 : 000000CCDDAABBCC */ - t2 = t1 >> 16; /* t2 : 0000000000CCDDAA */ - t0 = t1 & 0xFF00FF00; /* t0 : 00000000DD00BB00 */ - t3 = t2 & 0x00FF00FF; /* t3 : 0000000000CC00AA */ - t1 = t0 + t3; /* t1 : ssssssssDDCCBBAA */ - - return t1; -} -#define __arch_swab32 __arch_swab32 - -#endif /* __GNUC__ */ - -#endif /* _ALPHA_SWAB_H */ diff --git a/trunk/arch/alpha/kernel/.gitignore b/trunk/arch/alpha/kernel/.gitignore deleted file mode 100644 index c5f676c3c224..000000000000 --- a/trunk/arch/alpha/kernel/.gitignore +++ /dev/null @@ -1 +0,0 @@ -vmlinux.lds diff --git a/trunk/arch/alpha/kernel/core_marvel.c b/trunk/arch/alpha/kernel/core_marvel.c index e302daecbe56..9cd8dca742a7 100644 --- a/trunk/arch/alpha/kernel/core_marvel.c +++ b/trunk/arch/alpha/kernel/core_marvel.c @@ -658,8 +658,16 @@ __marvel_rtc_io(u8 b, unsigned long addr, int write) rtc_access.data = bcd2bin(b); rtc_access.function = 0x48 + !write; /* GET/PUT_TOY */ +#ifdef CONFIG_SMP + if (smp_processor_id() != boot_cpuid) + smp_call_function_single(boot_cpuid, + __marvel_access_rtc, + &rtc_access, 1); + else + __marvel_access_rtc(&rtc_access); +#else __marvel_access_rtc(&rtc_access); - +#endif ret = bin2bcd(rtc_access.data); break; diff --git a/trunk/arch/alpha/kernel/entry.S b/trunk/arch/alpha/kernel/entry.S index e4a54b615894..f77345bc66a9 100644 --- a/trunk/arch/alpha/kernel/entry.S +++ b/trunk/arch/alpha/kernel/entry.S @@ -896,9 +896,9 @@ sys_getxpid: .end sys_getxpid .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: + .globl sys_pipe + .ent sys_pipe +sys_pipe: lda $sp, -16($sp) stq $26, 0($sp) .prologue 0 @@ -916,7 +916,7 @@ sys_alpha_pipe: stq $1, 80+16($sp) 1: lda $sp, 16($sp) ret -.end sys_alpha_pipe +.end sys_pipe .align 4 .globl sys_execve @@ -933,7 +933,7 @@ sys_execve: osf_sigprocmask: .prologue 0 mov $sp, $18 - jmp $31, sys_osf_sigprocmask + jmp $31, do_osf_sigprocmask .end osf_sigprocmask .align 4 diff --git a/trunk/arch/alpha/kernel/irq_srm.c b/trunk/arch/alpha/kernel/irq_srm.c index a03fbca4940e..32212014fbe9 100644 --- a/trunk/arch/alpha/kernel/irq_srm.c +++ b/trunk/arch/alpha/kernel/irq_srm.c @@ -63,8 +63,6 @@ init_srm_irqs(long max, unsigned long ignore_mask) { long i; - if (NR_IRQS <= 16) - return; for (i = 16; i < max; ++i) { if (i < 64 && ((ignore_mask >> i) & 1)) continue; diff --git a/trunk/arch/alpha/kernel/machvec_impl.h b/trunk/arch/alpha/kernel/machvec_impl.h index 512685f78097..466c9dff8181 100644 --- a/trunk/arch/alpha/kernel/machvec_impl.h +++ b/trunk/arch/alpha/kernel/machvec_impl.h @@ -40,10 +40,7 @@ #define CAT1(x,y) x##y #define CAT(x,y) CAT1(x,y) -#define DO_DEFAULT_RTC \ - .rtc_port = 0x70, \ - .rtc_get_time = common_get_rtc_time, \ - .rtc_set_time = common_set_rtc_time +#define DO_DEFAULT_RTC .rtc_port = 0x70 #define DO_EV4_MMU \ .max_asn = EV4_MAX_ASN, \ diff --git a/trunk/arch/alpha/kernel/osf_sys.c b/trunk/arch/alpha/kernel/osf_sys.c index ae41f097864b..18a3ea1aac51 100644 --- a/trunk/arch/alpha/kernel/osf_sys.c +++ b/trunk/arch/alpha/kernel/osf_sys.c @@ -54,7 +54,8 @@ extern int do_pipe(int *); * identical to OSF as we don't return 0 on success, but doing otherwise * would require changes to libc. Hopefully this is good enough. */ -SYSCALL_DEFINE1(osf_brk, unsigned long, brk) +asmlinkage unsigned long +osf_brk(unsigned long brk) { unsigned long retval = sys_brk(brk); if (brk && brk != retval) @@ -65,9 +66,9 @@ SYSCALL_DEFINE1(osf_brk, unsigned long, brk) /* * This is pure guess-work.. */ -SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start, - unsigned long, text_len, unsigned long, bss_start, - unsigned long, bss_len) +asmlinkage int +osf_set_program_attributes(unsigned long text_start, unsigned long text_len, + unsigned long bss_start, unsigned long bss_len) { struct mm_struct *mm; @@ -145,9 +146,9 @@ osf_filldir(void *__buf, const char *name, int namlen, loff_t offset, return -EFAULT; } -SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, - struct osf_dirent __user *, dirent, unsigned int, count, - long __user *, basep) +asmlinkage int +osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent, + unsigned int count, long __user *basep) { int error; struct file *file; @@ -176,9 +177,9 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, #undef NAME_OFFSET -SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len, - unsigned long, prot, unsigned long, flags, unsigned long, fd, - unsigned long, off) +asmlinkage unsigned long +osf_mmap(unsigned long addr, unsigned long len, unsigned long prot, + unsigned long flags, unsigned long fd, unsigned long off) { struct file *file = NULL; unsigned long ret = -EBADF; @@ -253,8 +254,8 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, return error; } -SYSCALL_DEFINE3(osf_statfs, char __user *, pathname, - struct osf_statfs __user *, buffer, unsigned long, bufsiz) +asmlinkage int +osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz) { struct path path; int retval; @@ -267,8 +268,8 @@ SYSCALL_DEFINE3(osf_statfs, char __user *, pathname, return retval; } -SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd, - struct osf_statfs __user *, buffer, unsigned long, bufsiz) +asmlinkage int +osf_fstatfs(unsigned long fd, struct osf_statfs __user *buffer, unsigned long bufsiz) { struct file *file; int retval; @@ -367,8 +368,8 @@ osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags) return do_mount("", dirname, "proc", flags, NULL); } -SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, - int, flag, void __user *, data) +asmlinkage int +osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data) { int retval = -EINVAL; char *name; @@ -398,7 +399,8 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, return retval; } -SYSCALL_DEFINE1(osf_utsname, char __user *, name) +asmlinkage int +osf_utsname(char __user *name) { int error; @@ -421,12 +423,14 @@ SYSCALL_DEFINE1(osf_utsname, char __user *, name) return error; } -SYSCALL_DEFINE0(getpagesize) +asmlinkage unsigned long +sys_getpagesize(void) { return PAGE_SIZE; } -SYSCALL_DEFINE0(getdtablesize) +asmlinkage unsigned long +sys_getdtablesize(void) { return sysctl_nr_open; } @@ -434,7 +438,8 @@ SYSCALL_DEFINE0(getdtablesize) /* * For compatibility with OSF/1 only. Use utsname(2) instead. */ -SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen) +asmlinkage int +osf_getdomainname(char __user *name, int namelen) { unsigned len; int i; @@ -522,8 +527,8 @@ enum pl_code { PL_DEL = 5, PL_FDEL = 6 }; -SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code, - union pl_args __user *, args) +asmlinkage long +osf_proplist_syscall(enum pl_code code, union pl_args __user *args) { long error; int __user *min_buf_size_ptr; @@ -562,8 +567,8 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code, return error; } -SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss, - struct sigstack __user *, uoss) +asmlinkage int +osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss) { unsigned long usp = rdusp(); unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size; @@ -603,7 +608,8 @@ SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss, return error; } -SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count) +asmlinkage long +osf_sysinfo(int command, char __user *buf, long count) { char *sysinfo_table[] = { utsname()->sysname, @@ -641,8 +647,9 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count) return err; } -SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, - unsigned long, nbytes, int __user *, start, void __user *, arg) +asmlinkage unsigned long +osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, + int __user *start, void __user *arg) { unsigned long w; struct percpu_struct *cpu; @@ -698,8 +705,9 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, return -EOPNOTSUPP; } -SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer, - unsigned long, nbytes, int __user *, start, void __user *, arg) +asmlinkage unsigned long +osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, + int __user *start, void __user *arg) { switch (op) { case SSI_IEEE_FP_CONTROL: { @@ -872,8 +880,8 @@ jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value) value->tv_sec = jiffies / HZ; } -SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv, - struct timezone __user *, tz) +asmlinkage int +osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz) { if (tv) { struct timeval ktv; @@ -888,8 +896,8 @@ SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv, return 0; } -SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv, - struct timezone __user *, tz) +asmlinkage int +osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz) { struct timespec kts; struct timezone ktz; @@ -908,7 +916,8 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv, return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL); } -SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it) +asmlinkage int +osf_getitimer(int which, struct itimerval32 __user *it) { struct itimerval kit; int error; @@ -920,8 +929,8 @@ SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it) return error; } -SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in, - struct itimerval32 __user *, out) +asmlinkage int +osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __user *out) { struct itimerval kin, kout; int error; @@ -943,8 +952,8 @@ SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in, } -SYSCALL_DEFINE2(osf_utimes, char __user *, filename, - struct timeval32 __user *, tvs) +asmlinkage int +osf_utimes(char __user *filename, struct timeval32 __user *tvs) { struct timespec tv[2]; @@ -970,8 +979,9 @@ SYSCALL_DEFINE2(osf_utimes, char __user *, filename, #define MAX_SELECT_SECONDS \ ((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1) -SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp, - fd_set __user *, exp, struct timeval32 __user *, tvp) +asmlinkage int +osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, + struct timeval32 __user *tvp) { struct timespec end_time, *to = NULL; if (tvp) { @@ -1016,7 +1026,8 @@ struct rusage32 { long ru_nivcsw; /* involuntary " */ }; -SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru) +asmlinkage int +osf_getrusage(int who, struct rusage32 __user *ru) { struct rusage32 r; @@ -1042,8 +1053,9 @@ SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru) return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0; } -SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, - struct rusage32 __user *, ur) +asmlinkage long +osf_wait4(pid_t pid, int __user *ustatus, int options, + struct rusage32 __user *ur) { struct rusage r; long ret, err; @@ -1089,8 +1101,8 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, * seems to be a timeval pointer, and I suspect the second * one is the time remaining.. Ho humm.. No documentation. */ -SYSCALL_DEFINE2(osf_usleep_thread, struct timeval32 __user *, sleep, - struct timeval32 __user *, remain) +asmlinkage int +osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remain) { struct timeval tmp; unsigned long ticks; @@ -1143,7 +1155,8 @@ struct timex32 { int :32; int :32; int :32; int :32; }; -SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p) +asmlinkage int +sys_old_adjtimex(struct timex32 __user *txc_p) { struct timex txc; int ret; @@ -1254,8 +1267,8 @@ osf_fix_iov_len(const struct iovec __user *iov, unsigned long count) return 0; } -SYSCALL_DEFINE3(osf_readv, unsigned long, fd, - const struct iovec __user *, vector, unsigned long, count) +asmlinkage ssize_t +osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long count) { if (unlikely(personality(current->personality) == PER_OSF4)) if (osf_fix_iov_len(vector, count)) @@ -1263,8 +1276,8 @@ SYSCALL_DEFINE3(osf_readv, unsigned long, fd, return sys_readv(fd, vector, count); } -SYSCALL_DEFINE3(osf_writev, unsigned long, fd, - const struct iovec __user *, vector, unsigned long, count) +asmlinkage ssize_t +osf_writev(unsigned long fd, const struct iovec __user * vector, unsigned long count) { if (unlikely(personality(current->personality) == PER_OSF4)) if (osf_fix_iov_len(vector, count)) diff --git a/trunk/arch/alpha/kernel/pci-noop.c b/trunk/arch/alpha/kernel/pci-noop.c index c19a376520f4..8ac08311f5a5 100644 --- a/trunk/arch/alpha/kernel/pci-noop.c +++ b/trunk/arch/alpha/kernel/pci-noop.c @@ -109,8 +109,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, /* Stubs for the routines in pci_iommu.c: */ void * -__pci_alloc_consistent(struct pci_dev *pdev, size_t size, - dma_addr_t *dma_addrp, gfp_t gfp) +pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) { return NULL; } diff --git a/trunk/arch/alpha/kernel/pci.c b/trunk/arch/alpha/kernel/pci.c index a3b938811400..ff8cb638472e 100644 --- a/trunk/arch/alpha/kernel/pci.c +++ b/trunk/arch/alpha/kernel/pci.c @@ -320,6 +320,24 @@ pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } +/* Most Alphas have straight-forward swizzling needs. */ + +u8 __init +common_swizzle(struct pci_dev *dev, u8 *pinp) +{ + u8 pin = *pinp; + + while (dev->bus->parent) { + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + *pinp = pin; + + /* The slot is the slot of the last bridge. */ + return PCI_SLOT(dev->devfn); +} + void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) diff --git a/trunk/arch/alpha/kernel/pci_impl.h b/trunk/arch/alpha/kernel/pci_impl.h index 00edd04b585e..f8b74995a002 100644 --- a/trunk/arch/alpha/kernel/pci_impl.h +++ b/trunk/arch/alpha/kernel/pci_impl.h @@ -106,11 +106,16 @@ struct pci_iommu_arena; * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A. * Thus, each swizzle is ((pin-1) + (device#-4)) % 4 * - * pci_swizzle_interrupt_pin() swizzles for exactly one bridge. The routine - * pci_common_swizzle() handles multiple bridges. But there are a - * couple boards that do strange things. + * The following code swizzles for exactly one bridge. The routine + * common_swizzle below handles multiple bridges. But there are a + * couple boards that do strange things, so we define this here. */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin-1) + slot) % 4) + 1; +} + /* The following macro is used to implement the table-based irq mapping function for all single-bus Alphas. */ @@ -179,7 +184,7 @@ extern int pci_probe_only; extern unsigned long alpha_agpgart_size; extern void common_init_pci(void); -#define common_swizzle pci_common_swizzle +extern u8 common_swizzle(struct pci_dev *, u8 *); extern struct pci_controller *alloc_pci_controller(void); extern struct resource *alloc_resource(void); diff --git a/trunk/arch/alpha/kernel/proto.h b/trunk/arch/alpha/kernel/proto.h index fe14c6747cd6..708d5ca87782 100644 --- a/trunk/arch/alpha/kernel/proto.h +++ b/trunk/arch/alpha/kernel/proto.h @@ -145,8 +145,6 @@ extern void smp_percpu_timer_interrupt(struct pt_regs *); extern irqreturn_t timer_interrupt(int irq, void *dev); extern void common_init_rtc(void); extern unsigned long est_cycle_freq; -extern unsigned int common_get_rtc_time(struct rtc_time *time); -extern int common_set_rtc_time(struct rtc_time *time); /* smc37c93x.c */ extern void SMC93x_Init(void); diff --git a/trunk/arch/alpha/kernel/signal.c b/trunk/arch/alpha/kernel/signal.c index df65eaa84c4c..410af4f3140e 100644 --- a/trunk/arch/alpha/kernel/signal.c +++ b/trunk/arch/alpha/kernel/signal.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -52,8 +51,8 @@ static void do_signal(struct pt_regs *, struct switch_stack *, * Note that we don't need to acquire the kernel lock for SMP * operation, as all of this is local to this thread. */ -SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask, - struct pt_regs *, regs) +asmlinkage unsigned long +do_osf_sigprocmask(int how, unsigned long newmask, struct pt_regs *regs) { unsigned long oldmask = -EINVAL; @@ -82,9 +81,9 @@ SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask, return oldmask; } -SYSCALL_DEFINE3(osf_sigaction, int, sig, - const struct osf_sigaction __user *, act, - struct osf_sigaction __user *, oact) +asmlinkage int +osf_sigaction(int sig, const struct osf_sigaction __user *act, + struct osf_sigaction __user *oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -113,9 +112,10 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig, return ret; } -SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act, - struct sigaction __user *, oact, - size_t, sigsetsize, void __user *, restorer) +asmlinkage long +sys_rt_sigaction(int sig, const struct sigaction __user *act, + struct sigaction __user *oact, + size_t sigsetsize, void __user *restorer) { struct k_sigaction new_ka, old_ka; int ret; diff --git a/trunk/arch/alpha/kernel/smp.c b/trunk/arch/alpha/kernel/smp.c index 00f1dc3dfd5f..d953e510f68d 100644 --- a/trunk/arch/alpha/kernel/smp.c +++ b/trunk/arch/alpha/kernel/smp.c @@ -120,9 +120,8 @@ void __cpuinit smp_callin(void) { int cpuid = hard_smp_processor_id(); - cpumask_t mask = cpu_online_map; - if (cpu_test_and_set(cpuid, mask)) { + if (cpu_test_and_set(cpuid, cpu_online_map)) { printk("??, cpu 0x%x already present??\n", cpuid); BUG(); } diff --git a/trunk/arch/alpha/kernel/sys_dp264.c b/trunk/arch/alpha/kernel/sys_dp264.c index 9c9d1fd4155f..ab44c164d9d4 100644 --- a/trunk/arch/alpha/kernel/sys_dp264.c +++ b/trunk/arch/alpha/kernel/sys_dp264.c @@ -481,7 +481,7 @@ monet_swizzle(struct pci_dev *dev, u8 *pinp) slot = PCI_SLOT(dev->devfn); break; } - pin = pci_swizzle_interrupt_pin(dev, pin); + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ; /* Move up the chain of bridges. */ dev = dev->bus->self; diff --git a/trunk/arch/alpha/kernel/sys_eiger.c b/trunk/arch/alpha/kernel/sys_eiger.c index baf60f36cbd7..7ef3b6fb3700 100644 --- a/trunk/arch/alpha/kernel/sys_eiger.c +++ b/trunk/arch/alpha/kernel/sys_eiger.c @@ -204,7 +204,7 @@ eiger_swizzle(struct pci_dev *dev, u8 *pinp) break; } /* Must be a card-based bridge. */ - pin = pci_swizzle_interrupt_pin(dev, pin); + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); /* Move up the chain of bridges. */ dev = dev->bus->self; diff --git a/trunk/arch/alpha/kernel/sys_jensen.c b/trunk/arch/alpha/kernel/sys_jensen.c index e2516f9a8967..2c3de97de46c 100644 --- a/trunk/arch/alpha/kernel/sys_jensen.c +++ b/trunk/arch/alpha/kernel/sys_jensen.c @@ -261,8 +261,6 @@ struct alpha_machine_vector jensen_mv __initmv = { .machine_check = jensen_machine_check, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, .rtc_port = 0x170, - .rtc_get_time = common_get_rtc_time, - .rtc_set_time = common_set_rtc_time, .nr_irqs = 16, .device_interrupt = jensen_device_interrupt, diff --git a/trunk/arch/alpha/kernel/sys_marvel.c b/trunk/arch/alpha/kernel/sys_marvel.c index c5a1a2438c67..828449cd2636 100644 --- a/trunk/arch/alpha/kernel/sys_marvel.c +++ b/trunk/arch/alpha/kernel/sys_marvel.c @@ -23,7 +23,6 @@ #include #include #include -#include #include "proto.h" #include "err_impl.h" @@ -427,57 +426,6 @@ marvel_init_rtc(void) init_rtc_irq(); } -struct marvel_rtc_time { - struct rtc_time *time; - int retval; -}; - -#ifdef CONFIG_SMP -static void -smp_get_rtc_time(void *data) -{ - struct marvel_rtc_time *mrt = data; - mrt->retval = __get_rtc_time(mrt->time); -} - -static void -smp_set_rtc_time(void *data) -{ - struct marvel_rtc_time *mrt = data; - mrt->retval = __set_rtc_time(mrt->time); -} -#endif - -static unsigned int -marvel_get_rtc_time(struct rtc_time *time) -{ -#ifdef CONFIG_SMP - struct marvel_rtc_time mrt; - - if (smp_processor_id() != boot_cpuid) { - mrt.time = time; - smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1); - return mrt.retval; - } -#endif - return __get_rtc_time(time); -} - -static int -marvel_set_rtc_time(struct rtc_time *time) -{ -#ifdef CONFIG_SMP - struct marvel_rtc_time mrt; - - if (smp_processor_id() != boot_cpuid) { - mrt.time = time; - smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1); - return mrt.retval; - } -#endif - return __set_rtc_time(time); -} - static void marvel_smp_callin(void) { @@ -518,9 +466,7 @@ marvel_smp_callin(void) struct alpha_machine_vector marvel_ev7_mv __initmv = { .vector_name = "MARVEL/EV7", DO_EV7_MMU, - .rtc_port = 0x70, - .rtc_get_time = marvel_get_rtc_time, - .rtc_set_time = marvel_set_rtc_time, + DO_DEFAULT_RTC, DO_MARVEL_IO, .machine_check = marvel_machine_check, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, diff --git a/trunk/arch/alpha/kernel/sys_miata.c b/trunk/arch/alpha/kernel/sys_miata.c index 61ccd95579ec..910b43cd63e8 100644 --- a/trunk/arch/alpha/kernel/sys_miata.c +++ b/trunk/arch/alpha/kernel/sys_miata.c @@ -219,7 +219,7 @@ miata_swizzle(struct pci_dev *dev, u8 *pinp) slot = PCI_SLOT(dev->devfn) + 9; break; } - pin = pci_swizzle_interrupt_pin(dev, pin); + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); /* Move up the chain of bridges. */ dev = dev->bus->self; diff --git a/trunk/arch/alpha/kernel/sys_nautilus.c b/trunk/arch/alpha/kernel/sys_nautilus.c index 99c0f46f6b9c..a7f23b5ab814 100644 --- a/trunk/arch/alpha/kernel/sys_nautilus.c +++ b/trunk/arch/alpha/kernel/sys_nautilus.c @@ -245,10 +245,6 @@ nautilus_init_pci(void) IRONGATE0->pci_mem = pci_mem; pci_bus_assign_resources(bus); - - /* pci_common_swizzle() relies on bus->self being NULL - for the root bus, so just clear it. */ - bus->self = NULL; pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq); } diff --git a/trunk/arch/alpha/kernel/sys_noritake.c b/trunk/arch/alpha/kernel/sys_noritake.c index 538876b62449..eb2a1d63f484 100644 --- a/trunk/arch/alpha/kernel/sys_noritake.c +++ b/trunk/arch/alpha/kernel/sys_noritake.c @@ -257,7 +257,7 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp) slot = PCI_SLOT(dev->devfn) + 15; break; } - pin = pci_swizzle_interrupt_pin(dev, pin); + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ; /* Move up the chain of bridges. */ dev = dev->bus->self; diff --git a/trunk/arch/alpha/kernel/sys_ruffian.c b/trunk/arch/alpha/kernel/sys_ruffian.c index f15a329b6011..5b99cf3cd69c 100644 --- a/trunk/arch/alpha/kernel/sys_ruffian.c +++ b/trunk/arch/alpha/kernel/sys_ruffian.c @@ -160,7 +160,7 @@ ruffian_swizzle(struct pci_dev *dev, u8 *pinp) slot = PCI_SLOT(dev->devfn) + 10; break; } - pin = pci_swizzle_interrupt_pin(dev, pin); + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); /* Move up the chain of bridges. */ dev = dev->bus->self; diff --git a/trunk/arch/alpha/kernel/sys_sable.c b/trunk/arch/alpha/kernel/sys_sable.c index d232e42be018..a4555f497639 100644 --- a/trunk/arch/alpha/kernel/sys_sable.c +++ b/trunk/arch/alpha/kernel/sys_sable.c @@ -425,7 +425,7 @@ lynx_swizzle(struct pci_dev *dev, u8 *pinp) slot = PCI_SLOT(dev->devfn) + 11; break; } - pin = pci_swizzle_interrupt_pin(dev, pin); + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ; /* Move up the chain of bridges. */ dev = dev->bus->self; diff --git a/trunk/arch/alpha/kernel/systbls.S b/trunk/arch/alpha/kernel/systbls.S index 95c9aef1c106..ba914af18c4f 100644 --- a/trunk/arch/alpha/kernel/systbls.S +++ b/trunk/arch/alpha/kernel/systbls.S @@ -17,7 +17,7 @@ sys_call_table: .quad sys_write .quad alpha_ni_syscall /* 5 */ .quad sys_close - .quad sys_osf_wait4 + .quad osf_wait4 .quad alpha_ni_syscall .quad sys_link .quad sys_unlink /* 10 */ @@ -27,11 +27,11 @@ sys_call_table: .quad sys_mknod .quad sys_chmod /* 15 */ .quad sys_chown - .quad sys_osf_brk + .quad osf_brk .quad alpha_ni_syscall .quad sys_lseek .quad sys_getxpid /* 20 */ - .quad sys_osf_mount + .quad osf_mount .quad sys_umount .quad sys_setuid .quad sys_getxuid @@ -52,8 +52,8 @@ sys_call_table: .quad sys_setpgid .quad alpha_ni_syscall /* 40 */ .quad sys_dup - .quad sys_alpha_pipe - .quad sys_osf_set_program_attributes + .quad sys_pipe + .quad osf_set_program_attributes .quad alpha_ni_syscall .quad sys_open /* 45 */ .quad alpha_ni_syscall @@ -81,7 +81,7 @@ sys_call_table: .quad sys_newlstat .quad alpha_ni_syscall .quad alpha_ni_syscall /* 70 */ - .quad sys_osf_mmap + .quad osf_mmap .quad alpha_ni_syscall .quad sys_munmap .quad sys_mprotect @@ -94,17 +94,17 @@ sys_call_table: .quad sys_setgroups /* 80 */ .quad alpha_ni_syscall .quad sys_setpgid - .quad sys_osf_setitimer + .quad osf_setitimer .quad alpha_ni_syscall .quad alpha_ni_syscall /* 85 */ - .quad sys_osf_getitimer + .quad osf_getitimer .quad sys_gethostname .quad sys_sethostname .quad sys_getdtablesize .quad sys_dup2 /* 90 */ .quad sys_newfstat .quad sys_fcntl - .quad sys_osf_select + .quad osf_select .quad sys_poll .quad sys_fsync /* 95 */ .quad sys_setpriority @@ -123,22 +123,22 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall /* 110 */ .quad sys_sigsuspend - .quad sys_osf_sigstack + .quad osf_sigstack .quad sys_recvmsg .quad sys_sendmsg .quad alpha_ni_syscall /* 115 */ - .quad sys_osf_gettimeofday - .quad sys_osf_getrusage + .quad osf_gettimeofday + .quad osf_getrusage .quad sys_getsockopt .quad alpha_ni_syscall #ifdef CONFIG_OSF4_COMPAT - .quad sys_osf_readv /* 120 */ - .quad sys_osf_writev + .quad osf_readv /* 120 */ + .quad osf_writev #else .quad sys_readv /* 120 */ .quad sys_writev #endif - .quad sys_osf_settimeofday + .quad osf_settimeofday .quad sys_fchown .quad sys_fchmod .quad sys_recvfrom /* 125 */ @@ -154,7 +154,7 @@ sys_call_table: .quad sys_socketpair /* 135 */ .quad sys_mkdir .quad sys_rmdir - .quad sys_osf_utimes + .quad osf_utimes .quad alpha_ni_syscall .quad alpha_ni_syscall /* 140 */ .quad sys_getpeername @@ -172,16 +172,16 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 155 */ - .quad sys_osf_sigaction + .quad osf_sigaction .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad sys_osf_getdirentries - .quad sys_osf_statfs /* 160 */ - .quad sys_osf_fstatfs + .quad osf_getdirentries + .quad osf_statfs /* 160 */ + .quad osf_fstatfs .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad sys_osf_getdomainname /* 165 */ + .quad osf_getdomainname /* 165 */ .quad sys_setdomainname .quad alpha_ni_syscall .quad alpha_ni_syscall @@ -224,7 +224,7 @@ sys_call_table: .quad sys_semctl .quad sys_semget /* 205 */ .quad sys_semop - .quad sys_osf_utsname + .quad osf_utsname .quad sys_lchown .quad sys_shmat .quad sys_shmctl /* 210 */ @@ -258,23 +258,23 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 240 */ - .quad sys_osf_sysinfo + .quad osf_sysinfo .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad sys_osf_proplist_syscall + .quad osf_proplist_syscall .quad alpha_ni_syscall /* 245 */ .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 250 */ - .quad sys_osf_usleep_thread + .quad osf_usleep_thread .quad alpha_ni_syscall .quad alpha_ni_syscall .quad sys_sysfs .quad alpha_ni_syscall /* 255 */ - .quad sys_osf_getsysinfo - .quad sys_osf_setsysinfo + .quad osf_getsysinfo + .quad osf_setsysinfo .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 260 */ diff --git a/trunk/arch/alpha/kernel/time.c b/trunk/arch/alpha/kernel/time.c index b04e2cbf23a4..e6a231435cba 100644 --- a/trunk/arch/alpha/kernel/time.c +++ b/trunk/arch/alpha/kernel/time.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include @@ -181,15 +180,6 @@ common_init_rtc(void) init_rtc_irq(); } -unsigned int common_get_rtc_time(struct rtc_time *time) -{ - return __get_rtc_time(time); -} - -int common_set_rtc_time(struct rtc_time *time) -{ - return __set_rtc_time(time); -} /* Validate a computed cycle counter result against the known bounds for the given processor core. There's too much brokenness in the way of diff --git a/trunk/arch/alpha/mm/init.c b/trunk/arch/alpha/mm/init.c index 5d7a16eab312..234e42b8ee74 100644 --- a/trunk/arch/alpha/mm/init.c +++ b/trunk/arch/alpha/mm/init.c @@ -59,6 +59,13 @@ pgd_alloc(struct mm_struct *mm) return ret; } +pte_t * +pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) +{ + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + return pte; +} + /* * BAD_PAGE is the page that is used for page faults when linux diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index dbfdf87f993f..d6ebe39934b5 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -1325,8 +1325,6 @@ source "drivers/regulator/Kconfig" source "drivers/uio/Kconfig" -source "drivers/staging/Kconfig" - endmenu source "fs/Kconfig" diff --git a/trunk/arch/arm/common/clkdev.c b/trunk/arch/arm/common/clkdev.c index 1037bba18329..17a17b49a45b 100644 --- a/trunk/arch/arm/common/clkdev.c +++ b/trunk/arch/arm/common/clkdev.c @@ -24,15 +24,6 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); -/* - * Find the correct struct clk for the device and connection ID. - * We do slightly fuzzy matching here: - * An entry with a NULL ID is assumed to be a wildcard. - * If an entry has a device ID, it must match - * If an entry has a connection ID, it must match - * Then we take the most specific entry - with the following - * order of precidence: dev+con > dev only > con only. - */ static struct clk *clk_find(const char *dev_id, const char *con_id) { struct clk_lookup *p; @@ -40,17 +31,13 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) int match, best = 0; list_for_each_entry(p, &clocks, node) { + if ((p->dev_id && !dev_id) || (p->con_id && !con_id)) + continue; match = 0; - if (p->dev_id) { - if (!dev_id || strcmp(p->dev_id, dev_id)) - continue; - match += 2; - } - if (p->con_id) { - if (!con_id || strcmp(p->con_id, con_id)) - continue; - match += 1; - } + if (p->dev_id) + match += 2 * (strcmp(p->dev_id, dev_id) == 0); + if (p->con_id) + match += 1 * (strcmp(p->con_id, con_id) == 0); if (match == 0) continue; diff --git a/trunk/arch/arm/configs/afeb9260_defconfig b/trunk/arch/arm/configs/afeb9260_defconfig index f7a272cb3da0..ce909586a34f 100644 --- a/trunk/arch/arm/configs/afeb9260_defconfig +++ b/trunk/arch/arm/configs/afeb9260_defconfig @@ -719,8 +719,8 @@ CONFIG_I2C_GPIO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_AT24=y -# CONFIG_EEPROM_LEGACY is not set +CONFIG_AT24=y +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -744,7 +744,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/ams_delta_defconfig b/trunk/arch/arm/configs/ams_delta_defconfig index 764732529ea3..2c4aa11f0b0d 100644 --- a/trunk/arch/arm/configs/ams_delta_defconfig +++ b/trunk/arch/arm/configs/ams_delta_defconfig @@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/at91cap9adk_defconfig b/trunk/arch/arm/configs/at91cap9adk_defconfig index bc6bd9f6174d..bf97801a1068 100644 --- a/trunk/arch/arm/configs/at91cap9adk_defconfig +++ b/trunk/arch/arm/configs/at91cap9adk_defconfig @@ -676,7 +676,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -703,7 +703,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/at91rm9200dk_defconfig b/trunk/arch/arm/configs/at91rm9200dk_defconfig index 238b218394e3..868fb7b9530b 100644 --- a/trunk/arch/arm/configs/at91rm9200dk_defconfig +++ b/trunk/arch/arm/configs/at91rm9200dk_defconfig @@ -636,7 +636,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/at91rm9200ek_defconfig b/trunk/arch/arm/configs/at91rm9200ek_defconfig index 9f7a99ace514..de43fc675616 100644 --- a/trunk/arch/arm/configs/at91rm9200ek_defconfig +++ b/trunk/arch/arm/configs/at91rm9200ek_defconfig @@ -610,7 +610,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/at91sam9260ek_defconfig b/trunk/arch/arm/configs/at91sam9260ek_defconfig index e0ee7060f9aa..38e6a0abeb4e 100644 --- a/trunk/arch/arm/configs/at91sam9260ek_defconfig +++ b/trunk/arch/arm/configs/at91sam9260ek_defconfig @@ -582,7 +582,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/at91sam9261ek_defconfig b/trunk/arch/arm/configs/at91sam9261ek_defconfig index 01d1ef97d8be..93b779f94b41 100644 --- a/trunk/arch/arm/configs/at91sam9261ek_defconfig +++ b/trunk/arch/arm/configs/at91sam9261ek_defconfig @@ -660,7 +660,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -687,7 +687,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/at91sam9263ek_defconfig b/trunk/arch/arm/configs/at91sam9263ek_defconfig index 036a126725c1..a7ddd94363ca 100644 --- a/trunk/arch/arm/configs/at91sam9263ek_defconfig +++ b/trunk/arch/arm/configs/at91sam9263ek_defconfig @@ -670,7 +670,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -697,7 +697,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/at91sam9g20ek_defconfig b/trunk/arch/arm/configs/at91sam9g20ek_defconfig index 7e018a04c31b..df0d6ee672b3 100644 --- a/trunk/arch/arm/configs/at91sam9g20ek_defconfig +++ b/trunk/arch/arm/configs/at91sam9g20ek_defconfig @@ -665,7 +665,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/at91sam9rlek_defconfig b/trunk/arch/arm/configs/at91sam9rlek_defconfig index 237a2a6a8517..811bebbdc784 100644 --- a/trunk/arch/arm/configs/at91sam9rlek_defconfig +++ b/trunk/arch/arm/configs/at91sam9rlek_defconfig @@ -566,7 +566,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -593,7 +593,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/ateb9200_defconfig b/trunk/arch/arm/configs/ateb9200_defconfig index a19e824cf7f8..85c80f723d8e 100644 --- a/trunk/arch/arm/configs/ateb9200_defconfig +++ b/trunk/arch/arm/configs/ateb9200_defconfig @@ -723,7 +723,7 @@ CONFIG_I2C_GPIO=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/badge4_defconfig b/trunk/arch/arm/configs/badge4_defconfig index 80222feb7dad..b2bbf217c707 100644 --- a/trunk/arch/arm/configs/badge4_defconfig +++ b/trunk/arch/arm/configs/badge4_defconfig @@ -750,7 +750,7 @@ CONFIG_I2C_ELEKTOR=m # Other I2C Chip support # # CONFIG_SENSORS_DS1337 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/trunk/arch/arm/configs/cam60_defconfig b/trunk/arch/arm/configs/cam60_defconfig index 8448108347cf..f945105d6cd6 100644 --- a/trunk/arch/arm/configs/cam60_defconfig +++ b/trunk/arch/arm/configs/cam60_defconfig @@ -722,7 +722,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -749,7 +749,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/clps7500_defconfig b/trunk/arch/arm/configs/clps7500_defconfig new file mode 100644 index 000000000000..49e9f9d8b3d1 --- /dev/null +++ b/trunk/arch/arm/configs/clps7500_defconfig @@ -0,0 +1,801 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc1-bk2 +# Sun Mar 27 17:20:48 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# System Type +# +CONFIG_ARCH_CLPS7500=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM710=y +CONFIG_CPU_32v3=y +CONFIG_CPU_CACHE_V3=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V3=y +CONFIG_CPU_TLB_V3=y + +# +# Processor Features +# +CONFIG_TIMER_ACORN=y + +# +# Bus support +# +CONFIG_ISA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=16M root=nfs" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=y +CONFIG_PARPORT_PC_FIFO=y +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_ARC is not set +# CONFIG_PARPORT_GSC is not set +CONFIG_PARPORT_1284=y + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +CONFIG_CS89x0=y +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PLIP is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPPOE is not set +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +# CONFIG_SLIP_SMART is not set +# CONFIG_SLIP_MODE_SLIP6 is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_RPCKBD=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_PRINTER=y +# CONFIG_LP_CONSOLE is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Hardware Sensors Chip support +# +# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_ACORN=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/trunk/arch/arm/configs/cm_x300_defconfig b/trunk/arch/arm/configs/cm_x300_defconfig index 227da0843ead..46f1c9dc350c 100644 --- a/trunk/arch/arm/configs/cm_x300_defconfig +++ b/trunk/arch/arm/configs/cm_x300_defconfig @@ -763,8 +763,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/colibri_defconfig b/trunk/arch/arm/configs/colibri_defconfig index 744086fff414..c3e3418ed4fe 100644 --- a/trunk/arch/arm/configs/colibri_defconfig +++ b/trunk/arch/arm/configs/colibri_defconfig @@ -801,7 +801,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/corgi_defconfig b/trunk/arch/arm/configs/corgi_defconfig index d6cd165e9310..98765438048d 100644 --- a/trunk/arch/arm/configs/corgi_defconfig +++ b/trunk/arch/arm/configs/corgi_defconfig @@ -982,8 +982,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1008,7 +1008,7 @@ CONFIG_SPI_PXA2XX=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/trunk/arch/arm/configs/csb337_defconfig b/trunk/arch/arm/configs/csb337_defconfig index 29f68c2effe6..67e65e4f0cdc 100644 --- a/trunk/arch/arm/configs/csb337_defconfig +++ b/trunk/arch/arm/configs/csb337_defconfig @@ -679,7 +679,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/csb637_defconfig b/trunk/arch/arm/configs/csb637_defconfig index f7b60ceed6c7..99702146c9fc 100644 --- a/trunk/arch/arm/configs/csb637_defconfig +++ b/trunk/arch/arm/configs/csb637_defconfig @@ -704,7 +704,7 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/ecbat91_defconfig b/trunk/arch/arm/configs/ecbat91_defconfig index ca520733bdb0..cfeb817ad21a 100644 --- a/trunk/arch/arm/configs/ecbat91_defconfig +++ b/trunk/arch/arm/configs/ecbat91_defconfig @@ -721,7 +721,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -747,7 +747,7 @@ CONFIG_SPI_AT91=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # diff --git a/trunk/arch/arm/configs/ep93xx_defconfig b/trunk/arch/arm/configs/ep93xx_defconfig index 3f89d5f25bce..21aa013793c6 100644 --- a/trunk/arch/arm/configs/ep93xx_defconfig +++ b/trunk/arch/arm/configs/ep93xx_defconfig @@ -681,7 +681,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=y +CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/ezx_defconfig b/trunk/arch/arm/configs/ezx_defconfig index d5ee16e6abf3..2a84d557adc2 100644 --- a/trunk/arch/arm/configs/ezx_defconfig +++ b/trunk/arch/arm/configs/ezx_defconfig @@ -877,7 +877,7 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -900,7 +900,7 @@ CONFIG_SPI_PXA2XX=m # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/trunk/arch/arm/configs/footbridge_defconfig b/trunk/arch/arm/configs/footbridge_defconfig index 6ace512fa101..299dc22294a0 100644 --- a/trunk/arch/arm/configs/footbridge_defconfig +++ b/trunk/arch/arm/configs/footbridge_defconfig @@ -801,7 +801,7 @@ CONFIG_I2C=m # # Other I2C Chip support # -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/trunk/arch/arm/configs/iop13xx_defconfig b/trunk/arch/arm/configs/iop13xx_defconfig index 89c17761726b..482e57061053 100644 --- a/trunk/arch/arm/configs/iop13xx_defconfig +++ b/trunk/arch/arm/configs/iop13xx_defconfig @@ -744,7 +744,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/iop32x_defconfig b/trunk/arch/arm/configs/iop32x_defconfig index d70177b38f5f..8612f58e1056 100644 --- a/trunk/arch/arm/configs/iop32x_defconfig +++ b/trunk/arch/arm/configs/iop32x_defconfig @@ -847,7 +847,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/iop33x_defconfig b/trunk/arch/arm/configs/iop33x_defconfig index eec488298267..8b0098d19d08 100644 --- a/trunk/arch/arm/configs/iop33x_defconfig +++ b/trunk/arch/arm/configs/iop33x_defconfig @@ -746,7 +746,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/ixp2000_defconfig b/trunk/arch/arm/configs/ixp2000_defconfig index 57526c15e854..84680db6c615 100644 --- a/trunk/arch/arm/configs/ixp2000_defconfig +++ b/trunk/arch/arm/configs/ixp2000_defconfig @@ -768,7 +768,7 @@ CONFIG_I2C_IXP2000=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=y +CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/ixp23xx_defconfig b/trunk/arch/arm/configs/ixp23xx_defconfig index ef97561ed75b..4a2f7b2372db 100644 --- a/trunk/arch/arm/configs/ixp23xx_defconfig +++ b/trunk/arch/arm/configs/ixp23xx_defconfig @@ -900,7 +900,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=y +CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/ixp4xx_defconfig b/trunk/arch/arm/configs/ixp4xx_defconfig index 95cd8dfb5f1e..fc14932e3abd 100644 --- a/trunk/arch/arm/configs/ixp4xx_defconfig +++ b/trunk/arch/arm/configs/ixp4xx_defconfig @@ -1083,7 +1083,7 @@ CONFIG_I2C_IXP4XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=y +CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/kafa_defconfig b/trunk/arch/arm/configs/kafa_defconfig index 9f92fc527f59..6dd95a2c8d5d 100644 --- a/trunk/arch/arm/configs/kafa_defconfig +++ b/trunk/arch/arm/configs/kafa_defconfig @@ -603,7 +603,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/kirkwood_defconfig b/trunk/arch/arm/configs/kirkwood_defconfig index 4bc38078d580..ab8b1e0d0dac 100644 --- a/trunk/arch/arm/configs/kirkwood_defconfig +++ b/trunk/arch/arm/configs/kirkwood_defconfig @@ -905,8 +905,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -930,7 +930,7 @@ CONFIG_SPI_ORION=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/loki_defconfig b/trunk/arch/arm/configs/loki_defconfig index b720fcffbcd4..17da7c3b3d53 100644 --- a/trunk/arch/arm/configs/loki_defconfig +++ b/trunk/arch/arm/configs/loki_defconfig @@ -654,7 +654,7 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -675,7 +675,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/magician_defconfig b/trunk/arch/arm/configs/magician_defconfig index 73ba62b71063..4d11678584db 100644 --- a/trunk/arch/arm/configs/magician_defconfig +++ b/trunk/arch/arm/configs/magician_defconfig @@ -678,7 +678,7 @@ CONFIG_I2C_PXA=m # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/msm_defconfig b/trunk/arch/arm/configs/msm_defconfig index cc3b06ee24f9..3b4ecf2a90dd 100644 --- a/trunk/arch/arm/configs/msm_defconfig +++ b/trunk/arch/arm/configs/msm_defconfig @@ -580,7 +580,7 @@ CONFIG_I2C_MSM=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set CONFIG_SENSORS_PCA9633=y diff --git a/trunk/arch/arm/configs/mv78xx0_defconfig b/trunk/arch/arm/configs/mv78xx0_defconfig index 83c817f31bcc..d38ebf8721a4 100644 --- a/trunk/arch/arm/configs/mv78xx0_defconfig +++ b/trunk/arch/arm/configs/mv78xx0_defconfig @@ -832,7 +832,7 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/n770_defconfig b/trunk/arch/arm/configs/n770_defconfig index 672f6db06a52..568ef1770d5f 100644 --- a/trunk/arch/arm/configs/n770_defconfig +++ b/trunk/arch/arm/configs/n770_defconfig @@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -798,7 +798,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/trunk/arch/arm/configs/neocore926_defconfig b/trunk/arch/arm/configs/neocore926_defconfig index e0e4e98b5aa2..325f1e105f69 100644 --- a/trunk/arch/arm/configs/neocore926_defconfig +++ b/trunk/arch/arm/configs/neocore926_defconfig @@ -774,8 +774,8 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -798,7 +798,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/neponset_defconfig b/trunk/arch/arm/configs/neponset_defconfig index d81ea219c934..92ccdc6492f7 100644 --- a/trunk/arch/arm/configs/neponset_defconfig +++ b/trunk/arch/arm/configs/neponset_defconfig @@ -737,7 +737,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/trunk/arch/arm/configs/omap3_beagle_defconfig b/trunk/arch/arm/configs/omap3_beagle_defconfig index 4c6fb7e959df..e042d27eae16 100644 --- a/trunk/arch/arm/configs/omap3_beagle_defconfig +++ b/trunk/arch/arm/configs/omap3_beagle_defconfig @@ -687,8 +687,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/trunk/arch/arm/configs/omap3_pandora_defconfig b/trunk/arch/arm/configs/omap3_pandora_defconfig index b54ad2e2da36..09543f4de5bc 100644 --- a/trunk/arch/arm/configs/omap3_pandora_defconfig +++ b/trunk/arch/arm/configs/omap3_pandora_defconfig @@ -713,8 +713,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -740,7 +740,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/trunk/arch/arm/configs/omap_2430sdp_defconfig b/trunk/arch/arm/configs/omap_2430sdp_defconfig index 640e9afc4630..b0617c0da2a1 100644 --- a/trunk/arch/arm/configs/omap_2430sdp_defconfig +++ b/trunk/arch/arm/configs/omap_2430sdp_defconfig @@ -710,7 +710,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -743,7 +743,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/trunk/arch/arm/configs/omap_apollon_2420_defconfig b/trunk/arch/arm/configs/omap_apollon_2420_defconfig index ac7adf34c54a..bb39dfc72d69 100644 --- a/trunk/arch/arm/configs/omap_apollon_2420_defconfig +++ b/trunk/arch/arm/configs/omap_apollon_2420_defconfig @@ -612,7 +612,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/trunk/arch/arm/configs/omap_generic_1510_defconfig b/trunk/arch/arm/configs/omap_generic_1510_defconfig index ccdc661b5856..4b1c252f2091 100644 --- a/trunk/arch/arm/configs/omap_generic_1510_defconfig +++ b/trunk/arch/arm/configs/omap_generic_1510_defconfig @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/omap_generic_1610_defconfig b/trunk/arch/arm/configs/omap_generic_1610_defconfig index 0c42c8955047..fc66f019d56c 100644 --- a/trunk/arch/arm/configs/omap_generic_1610_defconfig +++ b/trunk/arch/arm/configs/omap_generic_1610_defconfig @@ -641,7 +641,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/omap_h2_1610_defconfig b/trunk/arch/arm/configs/omap_h2_1610_defconfig index 74dbdc644d32..c03507202f3c 100644 --- a/trunk/arch/arm/configs/omap_h2_1610_defconfig +++ b/trunk/arch/arm/configs/omap_h2_1610_defconfig @@ -700,7 +700,7 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -731,7 +731,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set CONFIG_SPI_TSC2101=y # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/trunk/arch/arm/configs/omap_h4_2420_defconfig b/trunk/arch/arm/configs/omap_h4_2420_defconfig index a4aab8e4c29b..5bc89185a64f 100644 --- a/trunk/arch/arm/configs/omap_h4_2420_defconfig +++ b/trunk/arch/arm/configs/omap_h4_2420_defconfig @@ -681,7 +681,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/omap_innovator_1510_defconfig b/trunk/arch/arm/configs/omap_innovator_1510_defconfig index 0cfe363e3365..55b2611bd90a 100644 --- a/trunk/arch/arm/configs/omap_innovator_1510_defconfig +++ b/trunk/arch/arm/configs/omap_innovator_1510_defconfig @@ -631,7 +631,7 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/omap_ldp_defconfig b/trunk/arch/arm/configs/omap_ldp_defconfig index aa9d34feddc6..b77d054169ee 100644 --- a/trunk/arch/arm/configs/omap_ldp_defconfig +++ b/trunk/arch/arm/configs/omap_ldp_defconfig @@ -629,8 +629,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -656,7 +656,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/trunk/arch/arm/configs/omap_osk_5912_defconfig b/trunk/arch/arm/configs/omap_osk_5912_defconfig index 6b3b5c610da0..b68e0144cab5 100644 --- a/trunk/arch/arm/configs/omap_osk_5912_defconfig +++ b/trunk/arch/arm/configs/omap_osk_5912_defconfig @@ -711,7 +711,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/onearm_defconfig b/trunk/arch/arm/configs/onearm_defconfig index f8701fadb600..418ca2febbe3 100644 --- a/trunk/arch/arm/configs/onearm_defconfig +++ b/trunk/arch/arm/configs/onearm_defconfig @@ -698,7 +698,7 @@ CONFIG_I2C_CHARDEV=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/orion5x_defconfig b/trunk/arch/arm/configs/orion5x_defconfig index a8ee6984a09e..b2456ca544c9 100644 --- a/trunk/arch/arm/configs/orion5x_defconfig +++ b/trunk/arch/arm/configs/orion5x_defconfig @@ -886,8 +886,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/trunk/arch/arm/configs/overo_defconfig b/trunk/arch/arm/configs/overo_defconfig index a57f9e4124fa..49200967a153 100644 --- a/trunk/arch/arm/configs/overo_defconfig +++ b/trunk/arch/arm/configs/overo_defconfig @@ -858,8 +858,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y +# CONFIG_AT24 is not set +CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -885,7 +885,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/trunk/arch/arm/configs/palmz71_defconfig b/trunk/arch/arm/configs/palmz71_defconfig index 08e14068fff7..6361922e71c1 100644 --- a/trunk/arch/arm/configs/palmz71_defconfig +++ b/trunk/arch/arm/configs/palmz71_defconfig @@ -554,7 +554,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/trunk/arch/arm/configs/palmz72_defconfig b/trunk/arch/arm/configs/palmz72_defconfig index a0dc37c05dea..3245f8f33e0a 100644 --- a/trunk/arch/arm/configs/palmz72_defconfig +++ b/trunk/arch/arm/configs/palmz72_defconfig @@ -527,8 +527,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -552,7 +552,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/trunk/arch/arm/configs/pcm027_defconfig b/trunk/arch/arm/configs/pcm027_defconfig index 05ad96a43b1d..17b9b2469570 100644 --- a/trunk/arch/arm/configs/pcm027_defconfig +++ b/trunk/arch/arm/configs/pcm027_defconfig @@ -606,7 +606,7 @@ CONFIG_I2C_PXA=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=y +CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/pcm038_defconfig b/trunk/arch/arm/configs/pcm038_defconfig index 41429a00f58c..6b798c215ca8 100644 --- a/trunk/arch/arm/configs/pcm038_defconfig +++ b/trunk/arch/arm/configs/pcm038_defconfig @@ -604,7 +604,7 @@ CONFIG_I2C_BOARDINFO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -626,7 +626,7 @@ CONFIG_SPI_BITBANG=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/trunk/arch/arm/configs/picotux200_defconfig b/trunk/arch/arm/configs/picotux200_defconfig index 9018f0f298aa..59e4463c2da2 100644 --- a/trunk/arch/arm/configs/picotux200_defconfig +++ b/trunk/arch/arm/configs/picotux200_defconfig @@ -744,7 +744,7 @@ CONFIG_I2C_GPIO=m # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m -CONFIG_EEPROM_LEGACY=m +CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m diff --git a/trunk/arch/arm/configs/pnx4008_defconfig b/trunk/arch/arm/configs/pnx4008_defconfig index 67b5f1e15f4a..811b8f60d19d 100644 --- a/trunk/arch/arm/configs/pnx4008_defconfig +++ b/trunk/arch/arm/configs/pnx4008_defconfig @@ -915,7 +915,7 @@ CONFIG_I2C_ALGOPCA=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=m +CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m # CONFIG_SENSORS_PCA9539 is not set CONFIG_SENSORS_PCF8591=m diff --git a/trunk/arch/arm/configs/qil-a9260_defconfig b/trunk/arch/arm/configs/qil-a9260_defconfig index cd1d717903ac..5cbd81589647 100644 --- a/trunk/arch/arm/configs/qil-a9260_defconfig +++ b/trunk/arch/arm/configs/qil-a9260_defconfig @@ -687,7 +687,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -714,7 +714,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/rpc_defconfig b/trunk/arch/arm/configs/rpc_defconfig index a29d61fe4c6a..f62d1817d2c6 100644 --- a/trunk/arch/arm/configs/rpc_defconfig +++ b/trunk/arch/arm/configs/rpc_defconfig @@ -590,7 +590,7 @@ CONFIG_I2C_ACORN=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/s3c2410_defconfig b/trunk/arch/arm/configs/s3c2410_defconfig index 65a583ee5df8..35faaea8623e 100644 --- a/trunk/arch/arm/configs/s3c2410_defconfig +++ b/trunk/arch/arm/configs/s3c2410_defconfig @@ -923,7 +923,7 @@ CONFIG_I2C_SIMTEC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=m +CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -950,7 +950,7 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/trunk/arch/arm/configs/s3c6400_defconfig b/trunk/arch/arm/configs/s3c6400_defconfig index 2e8fa50e9a09..cf3c1b5d7048 100644 --- a/trunk/arch/arm/configs/s3c6400_defconfig +++ b/trunk/arch/arm/configs/s3c6400_defconfig @@ -465,8 +465,8 @@ CONFIG_I2C_S3C2410=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_AT24=y -# CONFIG_EEPROM_LEGACY is not set +CONFIG_AT24=y +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/trunk/arch/arm/configs/spitz_defconfig b/trunk/arch/arm/configs/spitz_defconfig index 745c68ffb885..4df5b4db2aa0 100644 --- a/trunk/arch/arm/configs/spitz_defconfig +++ b/trunk/arch/arm/configs/spitz_defconfig @@ -977,8 +977,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1003,7 +1003,7 @@ CONFIG_SPI_PXA2XX=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/trunk/arch/arm/configs/sx1_defconfig b/trunk/arch/arm/configs/sx1_defconfig index 25b007ff8bab..853dcdd9f2e0 100644 --- a/trunk/arch/arm/configs/sx1_defconfig +++ b/trunk/arch/arm/configs/sx1_defconfig @@ -610,7 +610,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/trizeps4_defconfig b/trunk/arch/arm/configs/trizeps4_defconfig index b6f838197816..9033d147f052 100644 --- a/trunk/arch/arm/configs/trizeps4_defconfig +++ b/trunk/arch/arm/configs/trizeps4_defconfig @@ -948,7 +948,7 @@ CONFIG_I2C_PXA_SLAVE=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/usb-a9260_defconfig b/trunk/arch/arm/configs/usb-a9260_defconfig index fd7774033d64..fcb4aaabd439 100644 --- a/trunk/arch/arm/configs/usb-a9260_defconfig +++ b/trunk/arch/arm/configs/usb-a9260_defconfig @@ -676,7 +676,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/usb-a9263_defconfig b/trunk/arch/arm/configs/usb-a9263_defconfig index e7c19dd92557..b786e0407e8e 100644 --- a/trunk/arch/arm/configs/usb-a9263_defconfig +++ b/trunk/arch/arm/configs/usb-a9263_defconfig @@ -668,7 +668,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/trunk/arch/arm/configs/versatile_defconfig b/trunk/arch/arm/configs/versatile_defconfig index b11c5da3996c..8355f88f7292 100644 --- a/trunk/arch/arm/configs/versatile_defconfig +++ b/trunk/arch/arm/configs/versatile_defconfig @@ -611,7 +611,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=m +CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/trunk/arch/arm/configs/viper_defconfig b/trunk/arch/arm/configs/viper_defconfig index 30f463d2fa8a..d01fecb8673e 100644 --- a/trunk/arch/arm/configs/viper_defconfig +++ b/trunk/arch/arm/configs/viper_defconfig @@ -860,8 +860,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/trunk/arch/arm/configs/xm_x2xx_defconfig b/trunk/arch/arm/configs/xm_x2xx_defconfig index 1039f366bf8d..f891364deceb 100644 --- a/trunk/arch/arm/configs/xm_x2xx_defconfig +++ b/trunk/arch/arm/configs/xm_x2xx_defconfig @@ -1009,8 +1009,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/trunk/arch/arm/configs/yl9200_defconfig b/trunk/arch/arm/configs/yl9200_defconfig index 9192e5977674..a9f41c24c9dc 100644 --- a/trunk/arch/arm/configs/yl9200_defconfig +++ b/trunk/arch/arm/configs/yl9200_defconfig @@ -682,7 +682,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set diff --git a/trunk/arch/arm/include/asm/atomic.h b/trunk/arch/arm/include/asm/atomic.h index ee99723b3a6c..325f881ccb50 100644 --- a/trunk/arch/arm/include/asm/atomic.h +++ b/trunk/arch/arm/include/asm/atomic.h @@ -12,9 +12,10 @@ #define __ASM_ARM_ATOMIC_H #include -#include #include +typedef struct { volatile int counter; } atomic_t; + #define ATOMIC_INIT(i) { (i) } #ifdef __KERNEL__ diff --git a/trunk/arch/arm/include/asm/byteorder.h b/trunk/arch/arm/include/asm/byteorder.h index 77379748b171..4fbfb22f65a0 100644 --- a/trunk/arch/arm/include/asm/byteorder.h +++ b/trunk/arch/arm/include/asm/byteorder.h @@ -15,6 +15,39 @@ #ifndef __ASM_ARM_BYTEORDER_H #define __ASM_ARM_BYTEORDER_H +#include +#include + +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __u32 t; + +#ifndef __thumb__ + if (!__builtin_constant_p(x)) { + /* + * The compiler needs a bit of a hint here to always do the + * right thing and not screw it up to different degrees + * depending on the gcc version. + */ + asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); + } else +#endif + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ + t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ + x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ + + return x; +} + +#define __arch__swab32(x) ___arch__swab32(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + #ifdef __ARMEB__ #include #else diff --git a/trunk/arch/arm/include/asm/mach/pci.h b/trunk/arch/arm/include/asm/mach/pci.h index a38bdc7afa34..32da1ae17e06 100644 --- a/trunk/arch/arm/include/asm/mach/pci.h +++ b/trunk/arch/arm/include/asm/mach/pci.h @@ -42,7 +42,7 @@ struct pci_sys_data { /* * This is the standard PCI-PCI bridge swizzling algorithm. */ -#define pci_std_swizzle pci_common_swizzle +u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp); /* * Call this with your hw_pci struct to initialise the PCI system. diff --git a/trunk/arch/arm/include/asm/mmu.h b/trunk/arch/arm/include/asm/mmu.h index b561584d04a1..53099d4ee421 100644 --- a/trunk/arch/arm/include/asm/mmu.h +++ b/trunk/arch/arm/include/asm/mmu.h @@ -24,6 +24,7 @@ typedef struct { * modified for 2.6 by Hyok S. Choi */ typedef struct { + struct vm_list_struct *vmlist; unsigned long end_brk; } mm_context_t; diff --git a/trunk/arch/arm/include/asm/swab.h b/trunk/arch/arm/include/asm/swab.h deleted file mode 100644 index 27a689be0856..000000000000 --- a/trunk/arch/arm/include/asm/swab.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/include/asm/byteorder.h - * - * ARM Endian-ness. In little endian mode, the data bus is connected such - * that byte accesses appear as: - * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 - * and word accesses (data or instruction) appear as: - * d0...d31 - * - * When in big endian mode, byte accesses appear as: - * 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7 - * and word accesses (data or instruction) appear as: - * d0...d31 - */ -#ifndef __ASM_ARM_SWAB_H -#define __ASM_ARM_SWAB_H - -#include -#include - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - __u32 t; - -#ifndef __thumb__ - if (!__builtin_constant_p(x)) { - /* - * The compiler needs a bit of a hint here to always do the - * right thing and not screw it up to different degrees - * depending on the gcc version. - */ - asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); - } else -#endif - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ - - x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ - t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ - x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ - - return x; -} -#define __arch_swab32 __arch_swab32 - -#endif - diff --git a/trunk/arch/arm/kernel/bios32.c b/trunk/arch/arm/kernel/bios32.c index 809681900ec8..17a59b6e521f 100644 --- a/trunk/arch/arm/kernel/bios32.c +++ b/trunk/arch/arm/kernel/bios32.c @@ -479,6 +479,33 @@ EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_bus_to_resource); #endif +/* + * This is the standard PCI-PCI bridge swizzling algorithm: + * + * Dev: 0 1 2 3 + * A A B C D + * B B C D A + * C C D A B + * D D A B C + * ^^^^^^^^^^ irq pin on bridge + */ +u8 __devinit pci_std_swizzle(struct pci_dev *dev, u8 *pinp) +{ + int pin = *pinp - 1; + + while (dev->bus->self) { + pin = (pin + PCI_SLOT(dev->devfn)) & 3; + /* + * move up the chain of bridges, + * swizzling as we go. + */ + dev = dev->bus->self; + } + *pinp = pin + 1; + + return PCI_SLOT(dev->devfn); +} + /* * Swizzle the device pin each time we cross a bridge. * This might update pin and returns the slot number. diff --git a/trunk/arch/arm/kernel/calls.S b/trunk/arch/arm/kernel/calls.S index 9ca8d13f05f7..09a061cb7838 100644 --- a/trunk/arch/arm/kernel/calls.S +++ b/trunk/arch/arm/kernel/calls.S @@ -98,7 +98,7 @@ CALL(sys_uselib) CALL(sys_swapon) CALL(sys_reboot) - CALL(OBSOLETE(sys_old_readdir)) /* used by libc4 */ + CALL(OBSOLETE(old_readdir)) /* used by libc4 */ /* 90 */ CALL(OBSOLETE(old_mmap)) /* used by libc4 */ CALL(sys_munmap) CALL(sys_truncate) diff --git a/trunk/arch/arm/kernel/ecard.c b/trunk/arch/arm/kernel/ecard.c index eed2f795e1b3..60c079d85355 100644 --- a/trunk/arch/arm/kernel/ecard.c +++ b/trunk/arch/arm/kernel/ecard.c @@ -817,7 +817,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) ec->dma = NO_DMA; ec->ops = &ecard_default_ops; - dev_set_name(&ec->dev, "ecard%d", slot); + snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot); ec->dev.parent = NULL; ec->dev.bus = &ecard_bus_type; ec->dev.dma_mask = &ec->dma_mask; diff --git a/trunk/arch/arm/kernel/isa.c b/trunk/arch/arm/kernel/isa.c index 8ac9b8424007..50a30bc91872 100644 --- a/trunk/arch/arm/kernel/isa.c +++ b/trunk/arch/arm/kernel/isa.c @@ -16,7 +16,6 @@ #include #include #include -#include static unsigned int isa_membase, isa_portbase, isa_portshift; diff --git a/trunk/arch/arm/kernel/kprobes.c b/trunk/arch/arm/kernel/kprobes.c index f692efddd449..3f9abe0e9aff 100644 --- a/trunk/arch/arm/kernel/kprobes.c +++ b/trunk/arch/arm/kernel/kprobes.c @@ -92,7 +92,9 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_remove_kprobe(struct kprobe *p) { if (p->ainsn.insn) { + mutex_lock(&kprobe_mutex); free_insn_slot(p->ainsn.insn, 0); + mutex_unlock(&kprobe_mutex); p->ainsn.insn = NULL; } } diff --git a/trunk/arch/arm/mach-aaec2000/core.c b/trunk/arch/arm/mach-aaec2000/core.c index b5c5fc6ba3a9..50e13965dfed 100644 --- a/trunk/arch/arm/mach-aaec2000/core.c +++ b/trunk/arch/arm/mach-aaec2000/core.c @@ -212,7 +212,7 @@ static struct clcd_board clcd_plat_data = { static struct amba_device clcd_device = { .dev = { - .init_name = "mb:16", + .bus_id = "mb:16", .coherent_dma_mask = ~0, .platform_data = &clcd_plat_data, }, diff --git a/trunk/arch/arm/mach-at91/at91cap9.c b/trunk/arch/arm/mach-at91/at91cap9.c index 73376170fb91..0a38c69fdbc4 100644 --- a/trunk/arch/arm/mach-at91/at91cap9.c +++ b/trunk/arch/arm/mach-at91/at91cap9.c @@ -15,7 +15,6 @@ #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-at91/at91rm9200.c b/trunk/arch/arm/mach-at91/at91rm9200.c index 2e9ecad97f3d..28594fcc88e3 100644 --- a/trunk/arch/arm/mach-at91/at91rm9200.c +++ b/trunk/arch/arm/mach-at91/at91rm9200.c @@ -12,7 +12,6 @@ #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-at91/at91sam9260.c b/trunk/arch/arm/mach-at91/at91sam9260.c index 0894f1077be7..accb69ec478e 100644 --- a/trunk/arch/arm/mach-at91/at91sam9260.c +++ b/trunk/arch/arm/mach-at91/at91sam9260.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-at91/at91sam9261.c b/trunk/arch/arm/mach-at91/at91sam9261.c index 3acd7d7e6a42..7b51a59ae8b3 100644 --- a/trunk/arch/arm/mach-at91/at91sam9261.c +++ b/trunk/arch/arm/mach-at91/at91sam9261.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-at91/at91sam9263.c b/trunk/arch/arm/mach-at91/at91sam9263.c index 942792d630d8..ada4b6769107 100644 --- a/trunk/arch/arm/mach-at91/at91sam9263.c +++ b/trunk/arch/arm/mach-at91/at91sam9263.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-at91/at91sam9rl.c b/trunk/arch/arm/mach-at91/at91sam9rl.c index 211c5c14a1e6..252e954b49fd 100644 --- a/trunk/arch/arm/mach-at91/at91sam9rl.c +++ b/trunk/arch/arm/mach-at91/at91sam9rl.c @@ -12,7 +12,6 @@ #include #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-at91/board-sam9rlek.c b/trunk/arch/arm/mach-at91/board-sam9rlek.c index 35e12a49d1a6..9b937ee4815a 100644 --- a/trunk/arch/arm/mach-at91/board-sam9rlek.c +++ b/trunk/arch/arm/mach-at91/board-sam9rlek.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include "sam9_smc.h" diff --git a/trunk/arch/arm/mach-clps711x/edb7211-mm.c b/trunk/arch/arm/mach-clps711x/edb7211-mm.c index 0bea1454ae03..c58e32ec4c5d 100644 --- a/trunk/arch/arm/mach-clps711x/edb7211-mm.c +++ b/trunk/arch/arm/mach-clps711x/edb7211-mm.c @@ -24,6 +24,7 @@ #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-clps711x/fortunet.c b/trunk/arch/arm/mach-clps711x/fortunet.c index 7430e4049d87..7122b3d21043 100644 --- a/trunk/arch/arm/mach-clps711x/fortunet.c +++ b/trunk/arch/arm/mach-clps711x/fortunet.c @@ -24,6 +24,7 @@ #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-davinci/devices.c b/trunk/arch/arm/mach-davinci/devices.c index 808633f9f03c..3d4b1de8f898 100644 --- a/trunk/arch/arm/mach-davinci/devices.c +++ b/trunk/arch/arm/mach-davinci/devices.c @@ -20,7 +20,6 @@ #include #include -#include static struct resource i2c_resources[] = { { diff --git a/trunk/arch/arm/mach-davinci/include/mach/gpio.h b/trunk/arch/arm/mach-davinci/include/mach/gpio.h index b456f079f43f..b3a2961f0f46 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/gpio.h +++ b/trunk/arch/arm/mach-davinci/include/mach/gpio.h @@ -16,7 +16,6 @@ #include #include #include -#include /* * basic gpio routines diff --git a/trunk/arch/arm/mach-davinci/usb.c b/trunk/arch/arm/mach-davinci/usb.c index 867ead2559ad..fe182a85159c 100644 --- a/trunk/arch/arm/mach-davinci/usb.c +++ b/trunk/arch/arm/mach-davinci/usb.c @@ -12,7 +12,6 @@ #include #include -#include #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { @@ -77,6 +76,29 @@ static struct platform_device usb_dev = { .num_resources = ARRAY_SIZE(usb_resources), }; +#ifdef CONFIG_USB_MUSB_OTG + +static struct otg_transceiver *xceiv; + +struct otg_transceiver *otg_get_transceiver(void) +{ + if (xceiv) + get_device(xceiv->dev); + return xceiv; +} +EXPORT_SYMBOL(otg_get_transceiver); + +int otg_set_transceiver(struct otg_transceiver *x) +{ + if (xceiv && x) + return -EBUSY; + xceiv = x; + return 0; +} +EXPORT_SYMBOL(otg_set_transceiver); + +#endif + void __init setup_usb(unsigned mA, unsigned potpgt_msec) { usb_data.power = mA / 2; diff --git a/trunk/arch/arm/mach-ep93xx/core.c b/trunk/arch/arm/mach-ep93xx/core.c index 6d9152de6074..4781f323703b 100644 --- a/trunk/arch/arm/mach-ep93xx/core.c +++ b/trunk/arch/arm/mach-ep93xx/core.c @@ -409,7 +409,7 @@ static struct amba_pl010_data ep93xx_uart_data = { static struct amba_device uart1_device = { .dev = { - .init_name = "apb:uart1", + .bus_id = "apb:uart1", .platform_data = &ep93xx_uart_data, }, .res = { @@ -423,7 +423,7 @@ static struct amba_device uart1_device = { static struct amba_device uart2_device = { .dev = { - .init_name = "apb:uart2", + .bus_id = "apb:uart2", .platform_data = &ep93xx_uart_data, }, .res = { @@ -437,7 +437,7 @@ static struct amba_device uart2_device = { static struct amba_device uart3_device = { .dev = { - .init_name = "apb:uart3", + .bus_id = "apb:uart3", .platform_data = &ep93xx_uart_data, }, .res = { diff --git a/trunk/arch/arm/mach-footbridge/common.c b/trunk/arch/arm/mach-footbridge/common.c index b97f529e58e8..36ff06d4df15 100644 --- a/trunk/arch/arm/mach-footbridge/common.c +++ b/trunk/arch/arm/mach-footbridge/common.c @@ -28,17 +28,12 @@ #include "common.h" +extern void __init isa_init_irq(unsigned int irq); + unsigned int mem_fclk_21285 = 50000000; EXPORT_SYMBOL(mem_fclk_21285); -static void __init early_fclk(char **arg) -{ - mem_fclk_21285 = simple_strtoul(*arg, arg, 0); -} - -__early_param("mem_fclk_21285=", early_fclk); - static int __init parse_tag_memclk(const struct tag *tag) { mem_fclk_21285 = tag->u.memclk.fmemclk; diff --git a/trunk/arch/arm/mach-footbridge/common.h b/trunk/arch/arm/mach-footbridge/common.h index b05e662d21ad..580e31bbc711 100644 --- a/trunk/arch/arm/mach-footbridge/common.h +++ b/trunk/arch/arm/mach-footbridge/common.h @@ -7,4 +7,3 @@ extern void isa_rtc_init(void); extern void footbridge_map_io(void); extern void footbridge_init_irq(void); -extern void isa_init_irq(unsigned int irq); diff --git a/trunk/arch/arm/mach-footbridge/dc21285.c b/trunk/arch/arm/mach-footbridge/dc21285.c index 3ffa54841ec5..133086019e3e 100644 --- a/trunk/arch/arm/mach-footbridge/dc21285.c +++ b/trunk/arch/arm/mach-footbridge/dc21285.c @@ -287,9 +287,6 @@ struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(0, &dc21285_ops, sys); } -#define dc21285_request_irq(_a, _b, _c, _d, _e) \ - WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0) - void __init dc21285_preinit(void) { unsigned int mem_size, mem_mask; @@ -338,16 +335,16 @@ void __init dc21285_preinit(void) /* * We don't care if these fail. */ - dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED, - "PCI system error", &serr_timer); - dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED, - "PCI parity error", &perr_timer); - dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED, - "PCI abort", NULL); - dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED, - "Discard timer", NULL); - dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED, - "PCI data parity", NULL); + request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED, + "PCI system error", &serr_timer); + request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED, + "PCI parity error", &perr_timer); + request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED, + "PCI abort", NULL); + request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED, + "Discard timer", NULL); + request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED, + "PCI data parity", NULL); if (cfn_mode) { static struct resource csrio; diff --git a/trunk/arch/arm/mach-footbridge/isa-irq.c b/trunk/arch/arm/mach-footbridge/isa-irq.c index 8bfd06aeb64d..9ee80a211d3c 100644 --- a/trunk/arch/arm/mach-footbridge/isa-irq.c +++ b/trunk/arch/arm/mach-footbridge/isa-irq.c @@ -28,8 +28,6 @@ #include #include -#include "common.h" - static void isa_mask_pic_lo_irq(unsigned int irq) { unsigned int mask = 1 << (irq & 7); diff --git a/trunk/arch/arm/mach-h720x/h7202-eval.c b/trunk/arch/arm/mach-h720x/h7202-eval.c index 8c0ba99d683f..56161d55cf47 100644 --- a/trunk/arch/arm/mach-h720x/h7202-eval.c +++ b/trunk/arch/arm/mach-h720x/h7202-eval.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include "common.h" diff --git a/trunk/arch/arm/mach-imx/clock.c b/trunk/arch/arm/mach-imx/clock.c index cf332aeb942e..7ec60fc91565 100644 --- a/trunk/arch/arm/mach-imx/clock.c +++ b/trunk/arch/arm/mach-imx/clock.c @@ -23,7 +23,7 @@ #include #include -#include +#include /* * Very simple approach: We can't disable clocks, so we do diff --git a/trunk/arch/arm/mach-imx/generic.c b/trunk/arch/arm/mach-imx/generic.c index 887cb21f75b0..fa72174dd95c 100644 --- a/trunk/arch/arm/mach-imx/generic.c +++ b/trunk/arch/arm/mach-imx/generic.c @@ -245,11 +245,11 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info) imx_mmc_device.dev.platform_data = info; } -static struct imx_fb_platform_data imx_fb_info; +static struct imxfb_mach_info imx_fb_info; -void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info) +void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) { - memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data)); + memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info)); } static struct resource imxfb_resources[] = { diff --git a/trunk/arch/arm/mach-imx/include/mach/imx-regs.h b/trunk/arch/arm/mach-imx/include/mach/imx-regs.h index 490297fc0e38..fb9de2733879 100644 --- a/trunk/arch/arm/mach-imx/include/mach/imx-regs.h +++ b/trunk/arch/arm/mach-imx/include/mach/imx-regs.h @@ -373,4 +373,110 @@ #define TSTAT_CAPT (1<<1) #define TSTAT_COMP (1<<0) +/* + * LCD Controller + */ + +#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00) + +#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04) +#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) +#define SIZE_YMAX(y) ( (y) & 0x1ff ) + +#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08) +#define VPW_VPW(x) ( (x) & 0x3ff ) + +#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C) +#define CPOS_CC1 (1<<31) +#define CPOS_CC0 (1<<30) +#define CPOS_OP (1<<28) +#define CPOS_CXP(x) (((x) & 3ff) << 16) +#define CPOS_CYP(y) ((y) & 0x1ff) + +#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10) +#define LCWHB_BK_EN (1<<31) +#define LCWHB_CW(w) (((w) & 0x1f) << 24) +#define LCWHB_CH(h) (((h) & 0x1f) << 16) +#define LCWHB_BD(x) ((x) & 0xff) + +#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14) +#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) +#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) +#define LCHCC_CUR_COL_B(b) ((b) & 0x1f) + +#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18) +#define PCR_TFT (1<<31) +#define PCR_COLOR (1<<30) +#define PCR_PBSIZ_1 (0<<28) +#define PCR_PBSIZ_2 (1<<28) +#define PCR_PBSIZ_4 (2<<28) +#define PCR_PBSIZ_8 (3<<28) +#define PCR_BPIX_1 (0<<25) +#define PCR_BPIX_2 (1<<25) +#define PCR_BPIX_4 (2<<25) +#define PCR_BPIX_8 (3<<25) +#define PCR_BPIX_12 (4<<25) +#define PCR_BPIX_16 (4<<25) +#define PCR_PIXPOL (1<<24) +#define PCR_FLMPOL (1<<23) +#define PCR_LPPOL (1<<22) +#define PCR_CLKPOL (1<<21) +#define PCR_OEPOL (1<<20) +#define PCR_SCLKIDLE (1<<19) +#define PCR_END_SEL (1<<18) +#define PCR_END_BYTE_SWAP (1<<17) +#define PCR_REV_VS (1<<16) +#define PCR_ACD_SEL (1<<15) +#define PCR_ACD(x) (((x) & 0x7f) << 8) +#define PCR_SCLK_SEL (1<<7) +#define PCR_SHARP (1<<6) +#define PCR_PCD(x) ((x) & 0x3f) + +#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C) +#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) +#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) +#define HCR_H_WAIT_2(x) ((x) & 0xff) + +#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20) +#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) +#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) +#define VCR_V_WAIT_2(x) ((x) & 0xff) + +#define LCDC_POS __REG(IMX_LCDC_BASE+0x24) +#define POS_POS(x) ((x) & 1f) + +#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28) +#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) +#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) +#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) +#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) +#define LSCR1_GRAY1(x) (((x) & 0xf)) + +#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C) +#define PWMR_CLS(x) (((x) & 0x1ff) << 16) +#define PWMR_LDMSK (1<<15) +#define PWMR_SCR1 (1<<10) +#define PWMR_SCR0 (1<<9) +#define PWMR_CC_EN (1<<8) +#define PWMR_PW(x) ((x) & 0xff) + +#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30) +#define DMACR_BURST (1<<31) +#define DMACR_HM(x) (((x) & 0xf) << 16) +#define DMACR_TM(x) ((x) &0xf) + +#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34) +#define RMCR_LCDC_EN (1<<1) +#define RMCR_SELF_REF (1<<0) + +#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38) +#define LCDICR_INT_SYN (1<<2) +#define LCDICR_INT_CON (1) + +#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40) +#define LCDISR_UDR_ERR (1<<3) +#define LCDISR_ERR_RES (1<<2) +#define LCDISR_EOF (1<<1) +#define LCDISR_BOF (1<<0) + #endif // _IMX_REGS_H diff --git a/trunk/arch/arm/mach-integrator/clock.h b/trunk/arch/arm/mach-integrator/clock.h new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/trunk/arch/arm/mach-integrator/core.c b/trunk/arch/arm/mach-integrator/core.c index 6f8872913073..c89c949b4d45 100644 --- a/trunk/arch/arm/mach-integrator/core.c +++ b/trunk/arch/arm/mach-integrator/core.c @@ -37,7 +37,7 @@ static struct amba_pl010_data integrator_uart_data; static struct amba_device rtc_device = { .dev = { - .init_name = "mb:15", + .bus_id = "mb:15", }, .res = { .start = INTEGRATOR_RTC_BASE, @@ -50,7 +50,7 @@ static struct amba_device rtc_device = { static struct amba_device uart0_device = { .dev = { - .init_name = "mb:16", + .bus_id = "mb:16", .platform_data = &integrator_uart_data, }, .res = { @@ -64,7 +64,7 @@ static struct amba_device uart0_device = { static struct amba_device uart1_device = { .dev = { - .init_name = "mb:17", + .bus_id = "mb:17", .platform_data = &integrator_uart_data, }, .res = { @@ -78,7 +78,7 @@ static struct amba_device uart1_device = { static struct amba_device kmi0_device = { .dev = { - .init_name = "mb:18", + .bus_id = "mb:18", }, .res = { .start = KMI0_BASE, @@ -91,7 +91,7 @@ static struct amba_device kmi0_device = { static struct amba_device kmi1_device = { .dev = { - .init_name = "mb:19", + .bus_id = "mb:19", }, .res = { .start = KMI1_BASE, diff --git a/trunk/arch/arm/mach-integrator/integrator_cp.c b/trunk/arch/arm/mach-integrator/integrator_cp.c index 4ac04055c2ea..427c2d8dc123 100644 --- a/trunk/arch/arm/mach-integrator/integrator_cp.c +++ b/trunk/arch/arm/mach-integrator/integrator_cp.c @@ -407,7 +407,7 @@ static struct mmc_platform_data mmc_data = { static struct amba_device mmc_device = { .dev = { - .init_name = "mb:1c", + .bus_id = "mb:1c", .platform_data = &mmc_data, }, .res = { @@ -421,7 +421,7 @@ static struct amba_device mmc_device = { static struct amba_device aaci_device = { .dev = { - .init_name = "mb:1d", + .bus_id = "mb:1d", }, .res = { .start = INTCP_PA_AACI_BASE, @@ -532,7 +532,7 @@ static struct clcd_board clcd_data = { static struct amba_device clcd_device = { .dev = { - .init_name = "mb:c0", + .bus_id = "mb:c0", .coherent_dma_mask = ~0, .platform_data = &clcd_data, }, diff --git a/trunk/arch/arm/mach-integrator/pci.c b/trunk/arch/arm/mach-integrator/pci.c index 2fdb95433f0a..af7d3ff013ec 100644 --- a/trunk/arch/arm/mach-integrator/pci.c +++ b/trunk/arch/arm/mach-integrator/pci.c @@ -63,7 +63,13 @@ * * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A. * Thus, each swizzle is ((pin-1) + (device#-4)) % 4 + * + * The following code swizzles for exactly one bridge. */ +static inline int bridge_swizzle(int pin, unsigned int slot) +{ + return (pin + slot) & 3; +} /* * This routine handles multiple bridges. @@ -75,14 +81,15 @@ static u8 __init integrator_swizzle(struct pci_dev *dev, u8 *pinp) if (pin == 0) pin = 1; + pin -= 1; while (dev->bus->self) { - pin = pci_swizzle_interrupt_pin(dev, pin); + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); /* * move up the chain of bridges, swizzling as we go. */ dev = dev->bus->self; } - *pinp = pin; + *pinp = pin + 1; return PCI_SLOT(dev->devfn); } diff --git a/trunk/arch/arm/mach-kirkwood/common.c b/trunk/arch/arm/mach-kirkwood/common.c index b3404b7775b3..7b8ef97fb501 100644 --- a/trunk/arch/arm/mach-kirkwood/common.c +++ b/trunk/arch/arm/mach-kirkwood/common.c @@ -698,7 +698,6 @@ void __init kirkwood_init(void) printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); kirkwood_ge00_shared_data.t_clk = kirkwood_tclk; - kirkwood_ge01_shared_data.t_clk = kirkwood_tclk; kirkwood_spi_plat_data.tclk = kirkwood_tclk; kirkwood_uart0_data[0].uartclk = kirkwood_tclk; kirkwood_uart1_data[0].uartclk = kirkwood_tclk; diff --git a/trunk/arch/arm/mach-kirkwood/pcie.c b/trunk/arch/arm/mach-kirkwood/pcie.c index 73fccacd1a73..f6b08f207c89 100644 --- a/trunk/arch/arm/mach-kirkwood/pcie.c +++ b/trunk/arch/arm/mach-kirkwood/pcie.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include "common.h" diff --git a/trunk/arch/arm/mach-ks8695/devices.c b/trunk/arch/arm/mach-ks8695/devices.c index b89fb6d46ccc..36ab0fd3d9b6 100644 --- a/trunk/arch/arm/mach-ks8695/devices.c +++ b/trunk/arch/arm/mach-ks8695/devices.c @@ -22,7 +22,6 @@ #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-lh7a40x/clcd.c b/trunk/arch/arm/mach-lh7a40x/clcd.c index c472b9e8b37c..a2a543258fc3 100644 --- a/trunk/arch/arm/mach-lh7a40x/clcd.c +++ b/trunk/arch/arm/mach-lh7a40x/clcd.c @@ -207,7 +207,7 @@ static struct clcd_board clcd_platform_data = { static struct amba_device name##_device = { \ .dev = { \ .coherent_dma_mask = ~0, \ - .init_name = busid, \ + .bus_id = busid, \ .platform_data = plat, \ }, \ .res = { \ diff --git a/trunk/arch/arm/mach-msm/devices.c b/trunk/arch/arm/mach-msm/devices.c index 31b6b30e98bf..f2a74b92a97f 100644 --- a/trunk/arch/arm/mach-msm/devices.c +++ b/trunk/arch/arm/mach-msm/devices.c @@ -16,7 +16,6 @@ #include #include -#include #include #include "devices.h" diff --git a/trunk/arch/arm/mach-mv78xx0/pcie.c b/trunk/arch/arm/mach-mv78xx0/pcie.c index aad3a7a2f830..430ea84d587d 100644 --- a/trunk/arch/arm/mach-mv78xx0/pcie.c +++ b/trunk/arch/arm/mach-mv78xx0/pcie.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include "common.h" diff --git a/trunk/arch/arm/mach-mx2/devices.c b/trunk/arch/arm/mach-mx2/devices.c index 2f9240be1c76..af121f5ab710 100644 --- a/trunk/arch/arm/mach-mx2/devices.c +++ b/trunk/arch/arm/mach-mx2/devices.c @@ -32,7 +32,6 @@ #include #include -#include #include /* diff --git a/trunk/arch/arm/mach-mx3/devices.c b/trunk/arch/arm/mach-mx3/devices.c index f8428800f286..1d46cb4adf96 100644 --- a/trunk/arch/arm/mach-mx3/devices.c +++ b/trunk/arch/arm/mach-mx3/devices.c @@ -22,7 +22,6 @@ #include #include #include -#include #include static struct resource uart0[] = { diff --git a/trunk/arch/arm/mach-netx/fb.c b/trunk/arch/arm/mach-netx/fb.c index 1d844e228ea9..8f1f992f002e 100644 --- a/trunk/arch/arm/mach-netx/fb.c +++ b/trunk/arch/arm/mach-netx/fb.c @@ -24,8 +24,6 @@ #include #include -#include - #include #include @@ -93,7 +91,7 @@ void clk_put(struct clk *clk) static struct amba_device fb_device = { .dev = { - .init_name = "fb", + .bus_id = "fb", .coherent_dma_mask = ~0, }, .res = { diff --git a/trunk/arch/arm/mach-netx/time.c b/trunk/arch/arm/mach-netx/time.c index f201fddb594f..d51d627ce7cf 100644 --- a/trunk/arch/arm/mach-netx/time.c +++ b/trunk/arch/arm/mach-netx/time.c @@ -163,7 +163,7 @@ static void __init netx_timer_init(void) * Adding some safety ... */ netx_clockevent.min_delta_ns = clockevent_delta2ns(0xa00, &netx_clockevent); - netx_clockevent.cpumask = cpumask_of(0); + netx_clockevent.cpumask = cpumask_of_cpu(0); clockevents_register_device(&netx_clockevent); } diff --git a/trunk/arch/arm/mach-netx/xc.c b/trunk/arch/arm/mach-netx/xc.c index 181a78ba8165..8fc6205dc3a5 100644 --- a/trunk/arch/arm/mach-netx/xc.c +++ b/trunk/arch/arm/mach-netx/xc.c @@ -24,7 +24,6 @@ #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-h2.c b/trunk/arch/arm/mach-omap1/board-h2.c index 0d784a795092..b240c5f861da 100644 --- a/trunk/arch/arm/mach-omap1/board-h2.c +++ b/trunk/arch/arm/mach-omap1/board-h2.c @@ -37,14 +37,16 @@ #include #include +#include #include -#include #include #include #include #include #include #include +#include +#include static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), @@ -290,6 +292,41 @@ static struct platform_device h2_lcd_device = { .id = -1, }; +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(15), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), + + .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "H2 TSC2101", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ +}; + +static struct platform_device h2_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, @@ -297,6 +334,7 @@ static struct platform_device *h2_devices[] __initdata = { &h2_irda_device, &h2_kp_device, &h2_lcd_device, + &h2_mcbsp1_device, }; static void __init h2_init_smc91x(void) @@ -371,6 +409,11 @@ static struct omap_board_config_kernel h2_config[] __initdata = { #define H2_NAND_RB_GPIO_PIN 62 +static int h2_nand_dev_ready(struct omap_nand_platform_data *data) +{ + return gpio_get_value(H2_NAND_RB_GPIO_PIN); +} + static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/trunk/arch/arm/mach-omap1/board-h3.c b/trunk/arch/arm/mach-omap1/board-h3.c index bf08b6ad22ee..5157eea9be35 100644 --- a/trunk/arch/arm/mach-omap1/board-h3.c +++ b/trunk/arch/arm/mach-omap1/board-h3.c @@ -49,6 +49,8 @@ #include #include #include +#include +#include #define H3_TS_GPIO 48 @@ -385,6 +387,41 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { }, }; +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(15), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), + + .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "H3 TSC2101", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ +}; + +static struct platform_device h3_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, @@ -393,6 +430,7 @@ static struct platform_device *devices[] __initdata = { &h3_irda_device, &h3_kp_device, &h3_lcd_device, + &h3_mcbsp1_device, }; static struct omap_usb_config h3_usb_config __initdata = { @@ -434,6 +472,18 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; +static struct omap_gpio_switch h3_gpio_switches[] __initdata = { + { + .name = "mmc_slot", + .gpio = OMAP_MPUIO(1), + .type = OMAP_GPIO_SWITCH_TYPE_COVER, + .debounce_rising = 100, + .debounce_falling = 0, + .notify = h3_mmc_slot_cover_handler, + .notify_data = NULL, + }, +}; + #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct omap_nand_platform_data *data) diff --git a/trunk/arch/arm/mach-omap1/board-innovator.c b/trunk/arch/arm/mach-omap1/board-innovator.c index 071cd02a734e..af2fb9070083 100644 --- a/trunk/arch/arm/mach-omap1/board-innovator.c +++ b/trunk/arch/arm/mach-omap1/board-innovator.c @@ -37,6 +37,8 @@ #include #include #include +#include +#include #include static int innovator_keymap[] = { @@ -113,6 +115,42 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "OMAP Innovator AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ +}; + +static struct platform_device innovator_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct resource innovator_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -189,6 +227,7 @@ static struct platform_device innovator1510_spi_device = { static struct platform_device *innovator1510_devices[] __initdata = { &innovator_flash_device, &innovator1510_smc91x_device, + &innovator_mcbsp1_device, &innovator_kp_device, &innovator1510_lcd_device, &innovator1510_spi_device, diff --git a/trunk/arch/arm/mach-omap1/board-nokia770.c b/trunk/arch/arm/mach-omap1/board-nokia770.c index af51e0b180f2..4970c402a594 100644 --- a/trunk/arch/arm/mach-omap1/board-nokia770.c +++ b/trunk/arch/arm/mach-omap1/board-nokia770.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -260,13 +261,6 @@ static DEFINE_MUTEX(audio_pwr_lock); */ static int audio_pwr_state = -1; -static inline void aic23_power_up(void) -{ -} -static inline void aic23_power_down(void) -{ -} - /* * audio_pwr_up / down should be called under audio_pwr_lock */ diff --git a/trunk/arch/arm/mach-omap1/board-osk.c b/trunk/arch/arm/mach-omap1/board-osk.c index 1a16ecb2ccc8..ff9e67baa5c9 100644 --- a/trunk/arch/arm/mach-omap1/board-osk.c +++ b/trunk/arch/arm/mach-omap1/board-osk.c @@ -51,6 +51,8 @@ #include #include #include +#include +#include static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -139,10 +141,47 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "OSK AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ +}; + +static struct platform_device osk5912_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct platform_device *osk5912_devices[] __initdata = { &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, + &osk5912_mcbsp1_device, }; static struct gpio_led tps_leds[] = { @@ -220,10 +259,8 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { .platform_data = &tps_board, }, - { - I2C_BOARD_INFO("tlv320aic23", 0x1B), - }, /* TODO when driver support is ready: + * - aic23 audio chip at 0x1a * - optionally on Mistral, ov9640 camera sensor at 0x30 */ }; diff --git a/trunk/arch/arm/mach-omap1/board-palmte.c b/trunk/arch/arm/mach-omap1/board-palmte.c index 99f2b43f2541..75e32d35afd9 100644 --- a/trunk/arch/arm/mach-omap1/board-palmte.c +++ b/trunk/arch/arm/mach-omap1/board-palmte.c @@ -42,6 +42,8 @@ #include #include #include +#include +#include static void __init omap_palmte_init_irq(void) { @@ -193,6 +195,15 @@ static struct omap_usb_config palmte_usb_config __initdata = { .pins[0] = 2, }; +static struct omap_mmc_config palmte_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .wp_pin = PALMTE_MMC_WP_GPIO, + .power_pin = PALMTE_MMC_POWER_GPIO, + .switch_pin = PALMTE_MMC_SWITCH_GPIO, + }, +}; + static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -201,6 +212,24 @@ static struct omap_uart_config palmte_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; +static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = { + .spcr2 = FRST | GRST | XRST | XINTM(3), + .xcr2 = XDATDLY(1) | XFIG, + .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32), + .pcr0 = SCLKME | FSXP | CLKXP, +}; + +static struct omap_alsa_codec_config palmte_alsa_config = { + .name = "TSC2102 audio", + .mcbsp_regs_alsa = &palmte_mcbsp1_regs, + .codec_configure_dev = NULL, /* tsc2102_configure, */ + .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2102_clock_setup, */ + .codec_clock_on = NULL, /* tsc2102_clock_on, */ + .codec_clock_off = NULL, /* tsc2102_clock_off, */ + .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */ +}; + #ifdef CONFIG_APM /* * Values measured in 10 minute intervals averaged over 10 samples. diff --git a/trunk/arch/arm/mach-omap1/board-palmtt.c b/trunk/arch/arm/mach-omap1/board-palmtt.c index 1cbc1275c95f..5c001afe8062 100644 --- a/trunk/arch/arm/mach-omap1/board-palmtt.c +++ b/trunk/arch/arm/mach-omap1/board-palmtt.c @@ -30,6 +30,7 @@ #include #include +#include #include #include #include @@ -39,6 +40,7 @@ #include #include #include +#include #include #include @@ -120,6 +122,44 @@ static struct platform_device palmtt_flash_device = { .resource = &palmtt_flash_resource, }; +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | + RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | + XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | + FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "PalmTT AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ +}; + +static struct platform_device palmtt_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct resource palmtt_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -217,6 +257,7 @@ static struct platform_device palmtt_led_device = { static struct platform_device *palmtt_devices[] __initdata = { &palmtt_flash_device, + &palmtt_mcbsp1_device, &palmtt_kp_device, &palmtt_lcd_device, &palmtt_irda_device, diff --git a/trunk/arch/arm/mach-omap1/board-palmz71.c b/trunk/arch/arm/mach-omap1/board-palmz71.c index baf5efbfe3e8..cc05257eb1cd 100644 --- a/trunk/arch/arm/mach-omap1/board-palmz71.c +++ b/trunk/arch/arm/mach-omap1/board-palmz71.c @@ -32,6 +32,7 @@ #include #include +#include #include #include #include @@ -178,6 +179,41 @@ static struct platform_device palmz71_spi_device = { .id = -1, }; +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "PalmZ71 AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, /* aic23_configure */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate */ + .codec_clock_setup = NULL, /* aic23_clock_setup */ + .codec_clock_on = NULL, /* aic23_clock_on */ + .codec_clock_off = NULL, /* aic23_clock_off */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate */ +}; + +static struct platform_device palmz71_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct omap_backlight_config palmz71_backlight_config = { .default_intensity = 0xa0, }; @@ -193,6 +229,7 @@ static struct platform_device palmz71_backlight_device = { static struct platform_device *devices[] __initdata = { &palmz71_rom_device, &palmz71_kp_device, + &palmz71_mcbsp1_device, &palmz71_lcd_device, &palmz71_irda_device, &palmz71_spi_device, diff --git a/trunk/arch/arm/mach-omap1/board-sx1.c b/trunk/arch/arm/mach-omap1/board-sx1.c index 28c76a1e71c0..8171fe0ca082 100644 --- a/trunk/arch/arm/mach-omap1/board-sx1.c +++ b/trunk/arch/arm/mach-omap1/board-sx1.c @@ -34,12 +34,13 @@ #include #include -#include #include #include #include #include #include +#include +#include #include /* Write to I2C device */ @@ -253,6 +254,35 @@ static struct platform_device sx1_irda_device = { .resource = sx1_irda_resources, }; +/*----------- McBSP & Sound -------------------------*/ + +/* Playback interface - McBSP1 */ +static struct omap_mcbsp_reg_cfg mcbsp1_regs = { + .spcr2 = XINTM(3), /* SPCR2=30 */ + .spcr1 = RINTM(3), /* SPCR1=30 */ + .rcr2 = 0, /* RCR2 =00 */ + .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */ + .xcr2 = 0, /* XCR2 = 0 */ + .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ + .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ + .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ + .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, + /* PCR0 =0f0f */ +}; + +static struct omap_alsa_codec_config sx1_alsa_config = { + .name = "SX1 EGold", + .mcbsp_regs_alsa = &mcbsp1_regs, +}; + +static struct platform_device sx1_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &sx1_alsa_config, + }, +}; + /*----------- MTD -------------------------*/ static struct mtd_partition sx1_partitions[] = { @@ -364,6 +394,7 @@ static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, &sx1_lcd_device, + &sx1_mcbsp1_device, &sx1_irda_device, }; /*-----------------------------------------*/ @@ -392,9 +423,9 @@ static void __init omap_sx1_init(void) /* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ - gpio_request(1, "A_IRDA_OFF"); - gpio_request(11, "A_SWITCH"); - gpio_request(15, "A_USB_ON"); + omap_request_gpio(1); /* A_IRDA_OFF */ + omap_request_gpio(11); /* A_SWITCH */ + omap_request_gpio(15); /* A_USB_ON */ gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ diff --git a/trunk/arch/arm/mach-omap1/board-voiceblue.c b/trunk/arch/arm/mach-omap1/board-voiceblue.c index a7653542a2b0..c224f3c64235 100644 --- a/trunk/arch/arm/mach-omap1/board-voiceblue.c +++ b/trunk/arch/arm/mach-omap1/board-voiceblue.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/mcbsp.c b/trunk/arch/arm/mach-omap1/mcbsp.c index ca7a0cc1707c..7de7c6915584 100644 --- a/trunk/arch/arm/mach-omap1/mcbsp.c +++ b/trunk/arch/arm/mach-omap1/mcbsp.c @@ -17,9 +17,7 @@ #include #include -#include #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-apollon.c b/trunk/arch/arm/mach-omap2/board-apollon.c index 0a7b24ba1652..bf1e5d32c2a3 100644 --- a/trunk/arch/arm/mach-omap2/board-apollon.c +++ b/trunk/arch/arm/mach-omap2/board-apollon.c @@ -22,6 +22,8 @@ #include #include #include +#include +#include #include #include #include @@ -280,16 +282,65 @@ static void __init apollon_led_init(void) { /* LED0 - AA10 */ omap_cfg_reg(AA10_242X_GPIO13); - gpio_request(LED0_GPIO13, "LED0"); - gpio_direction_output(LED0_GPIO13, 0); + omap_request_gpio(LED0_GPIO13); + omap_set_gpio_direction(LED0_GPIO13, 0); + omap_set_gpio_dataout(LED0_GPIO13, 0); /* LED1 - AA6 */ omap_cfg_reg(AA6_242X_GPIO14); - gpio_request(LED1_GPIO14, "LED1"); - gpio_direction_output(LED1_GPIO14, 0); + omap_request_gpio(LED1_GPIO14); + omap_set_gpio_direction(LED1_GPIO14, 0); + omap_set_gpio_dataout(LED1_GPIO14, 0); /* LED2 - AA4 */ omap_cfg_reg(AA4_242X_GPIO15); - gpio_request(LED2_GPIO15, "LED2"); - gpio_direction_output(LED2_GPIO15, 0); + omap_request_gpio(LED2_GPIO15); + omap_set_gpio_direction(LED2_GPIO15, 0); + omap_set_gpio_dataout(LED2_GPIO15, 0); +} + +static irqreturn_t apollon_sw_interrupt(int irq, void *ignored) +{ + static unsigned int led0, led1, led2; + + if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16)) + omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1); + else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17)) + omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1); + else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58)) + omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1); + + return IRQ_HANDLED; +} + +static void __init apollon_sw_init(void) +{ + /* Enter SW - Y11 */ + omap_cfg_reg(Y11_242X_GPIO16); + omap_request_gpio(SW_ENTER_GPIO16); + gpio_direction_input(SW_ENTER_GPIO16); + /* Up SW - AA12 */ + omap_cfg_reg(AA12_242X_GPIO17); + omap_request_gpio(SW_UP_GPIO17); + gpio_direction_input(SW_UP_GPIO17); + /* Down SW - AA8 */ + omap_cfg_reg(AA8_242X_GPIO58); + omap_request_gpio(SW_DOWN_GPIO58); + gpio_direction_input(SW_DOWN_GPIO58); + + set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, + IRQF_SHARED, "enter sw", + &apollon_sw_interrupt)) + return; + set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, + IRQF_SHARED, "up sw", + &apollon_sw_interrupt)) + return; + set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, + IRQF_SHARED, "down sw", + &apollon_sw_interrupt)) + return; } static void __init apollon_usb_init(void) @@ -306,6 +357,7 @@ static void __init omap_apollon_init(void) u32 v; apollon_led_init(); + apollon_sw_init(); apollon_flash_init(); apollon_usb_init(); diff --git a/trunk/arch/arm/mach-omap2/board-ldp.c b/trunk/arch/arm/mach-omap2/board-ldp.c index f6a13451d1fd..aa6972781e4a 100644 --- a/trunk/arch/arm/mach-omap2/board-ldp.c +++ b/trunk/arch/arm/mach-omap2/board-ldp.c @@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void) ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - if (gpio_request(eth_gpio, "smc911x irq") < 0) { + if (omap_request_gpio(eth_gpio) < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", eth_gpio); return; diff --git a/trunk/arch/arm/mach-omap2/board-omap3beagle.c b/trunk/arch/arm/mach-omap2/board-omap3beagle.c index 38c88fbe658d..9e5ada01b5fa 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3beagle.c +++ b/trunk/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,8 +28,6 @@ #include #include -#include - #include #include #include @@ -122,9 +120,6 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -309,6 +304,10 @@ static void __init omap3_beagle_init(void) omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_serial_init(); + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + omap_cfg_reg(J25_34XX_GPIO170); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ diff --git a/trunk/arch/arm/mach-omap2/mcbsp.c b/trunk/arch/arm/mach-omap2/mcbsp.c index e20023c9d15d..cae3ebe249b3 100644 --- a/trunk/arch/arm/mach-omap2/mcbsp.c +++ b/trunk/arch/arm/mach-omap2/mcbsp.c @@ -17,9 +17,7 @@ #include #include -#include #include -#include #include #include #include diff --git a/trunk/arch/arm/mach-orion5x/pci.c b/trunk/arch/arm/mach-orion5x/pci.c index d0a785a3b880..a7b7d77b1b09 100644 --- a/trunk/arch/arm/mach-orion5x/pci.c +++ b/trunk/arch/arm/mach-orion5x/pci.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include "common.h" diff --git a/trunk/arch/arm/mach-pnx4008/gpio.c b/trunk/arch/arm/mach-pnx4008/gpio.c index f219914f5b29..015cc21d5f55 100644 --- a/trunk/arch/arm/mach-pnx4008/gpio.c +++ b/trunk/arch/arm/mach-pnx4008/gpio.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-pnx4008/i2c.c b/trunk/arch/arm/mach-pnx4008/i2c.c index f3fea29c00d3..87c093286ff9 100644 --- a/trunk/arch/arm/mach-pnx4008/i2c.c +++ b/trunk/arch/arm/mach-pnx4008/i2c.c @@ -15,7 +15,6 @@ #include #include #include -#include #include static int set_clock_run(struct platform_device *pdev) diff --git a/trunk/arch/arm/mach-pxa/corgi.c b/trunk/arch/arm/mach-pxa/corgi.c index a8d91b6c136b..c5e28a46b292 100644 --- a/trunk/arch/arm/mach-pxa/corgi.c +++ b/trunk/arch/arm/mach-pxa/corgi.c @@ -27,7 +27,6 @@ #include #include #include -#include #include