diff --git a/[refs] b/[refs] index 86f969faf5ae..120bcd85ff6c 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 4c6ed8f496fe89ff81b3d6e617a531bedfb613e4 +refs/heads/master: 73c5162aa362a543793f4a957c6c536dcbaa89ce diff --git a/trunk/Documentation/RCU/checklist.txt b/trunk/Documentation/RCU/checklist.txt index accfe2f5247d..6e253407b3dc 100644 --- a/trunk/Documentation/RCU/checklist.txt +++ b/trunk/Documentation/RCU/checklist.txt @@ -298,15 +298,3 @@ over a rather long period of time, but improvements are always welcome! Note that, rcu_assign_pointer() and rcu_dereference() relate to SRCU just as they do to other forms of RCU. - -15. The whole point of call_rcu(), synchronize_rcu(), and friends - is to wait until all pre-existing readers have finished before - carrying out some otherwise-destructive operation. It is - therefore critically important to -first- remove any path - that readers can follow that could be affected by the - destructive operation, and -only- -then- invoke call_rcu(), - synchronize_rcu(), or friends. - - Because these primitives only wait for pre-existing readers, - it is the caller's responsibility to guarantee safety to - any subsequent readers. diff --git a/trunk/Documentation/cputopology.txt b/trunk/Documentation/cputopology.txt index b41f3e58aefa..45932ec21cee 100644 --- a/trunk/Documentation/cputopology.txt +++ b/trunk/Documentation/cputopology.txt @@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of these macros in include/asm-XXX/topology.h: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) -#define topology_thread_cpumask(cpu) -#define topology_core_cpumask(cpu) +#define topology_thread_siblings(cpu) +#define topology_core_siblings(cpu) The type of **_id is int. -The type of siblings is (const) struct cpumask *. +The type of siblings is cpumask_t. To be consistent on all architectures, include/linux/topology.h provides default definitions for any of the above macros that are diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt index 20d3b94703a4..5ddbe350487a 100644 --- a/trunk/Documentation/feature-removal-schedule.txt +++ b/trunk/Documentation/feature-removal-schedule.txt @@ -335,12 +335,3 @@ Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net" Secmark, it is time to deprecate the older mechanism and start the process of removing the old code. Who: Paul Moore ---------------------------- - -What: sysfs ui for changing p4-clockmod parameters -When: September 2009 -Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and - e088e4c9cdb618675874becb91b2fd581ee707e6. - Removal is subject to fixing any remaining bugs in ACPI which may - cause the thermal throttling not to happen at the right time. -Who: Dave Jones , Matthew Garrett diff --git a/trunk/Documentation/filesystems/ext2.txt b/trunk/Documentation/filesystems/ext2.txt index 23448551cabe..4333e836c495 100644 --- a/trunk/Documentation/filesystems/ext2.txt +++ b/trunk/Documentation/filesystems/ext2.txt @@ -373,10 +373,10 @@ Filesystem Resizing http://ext2resize.sourceforge.net/ Compression (*) http://e2compr.sourceforge.net/ Implementations for: -Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs -Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2 +Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm +Windows 95 (*) http://www.yipton.demon.co.uk/content.html#FSDEXT2 DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ -OS/2 (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ -RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/ +OS/2 http://perso.wanadoo.fr/matthieu.willm/ext2-os2/ +RISC OS client ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/ -(*) no longer actively developed/supported (as of Mar 2009) +(*) no longer actively developed/supported (as of Apr 2001) diff --git a/trunk/Documentation/filesystems/ext3.txt b/trunk/Documentation/filesystems/ext3.txt index e5f3833a6ef8..9dd2a3bb2acc 100644 --- a/trunk/Documentation/filesystems/ext3.txt +++ b/trunk/Documentation/filesystems/ext3.txt @@ -198,5 +198,5 @@ kernel source: programs: http://e2fsprogs.sourceforge.net/ http://ext2resize.sourceforge.net -useful links: http://www.ibm.com/developerworks/library/l-fs7.html - http://www.ibm.com/developerworks/library/l-fs8.html +useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/ + http://www-106.ibm.com/developerworks/linux/library/l-fs8/ diff --git a/trunk/Documentation/filesystems/squashfs.txt b/trunk/Documentation/filesystems/squashfs.txt index b324c033035a..3e79e4a7a392 100644 --- a/trunk/Documentation/filesystems/squashfs.txt +++ b/trunk/Documentation/filesystems/squashfs.txt @@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs: Squashfs Cramfs -Max filesystem size: 2^64 256 MiB +Max filesystem size: 2^64 16 MiB Max file size: ~ 2 TiB 16 MiB Max files: unlimited unlimited Max directories: unlimited unlimited diff --git a/trunk/Documentation/ftrace.txt b/trunk/Documentation/ftrace.txt index fd9a3e693813..22614bef6359 100644 --- a/trunk/Documentation/ftrace.txt +++ b/trunk/Documentation/ftrace.txt @@ -100,7 +100,7 @@ of ftrace. Here is a list of some of the key files: that is displayed in one of the above output files. - tracing_max_latency: + trace_max_latency: Some of the tracers record the max latency. For example, the time interrupts are disabled. diff --git a/trunk/Documentation/hwmon/lm90 b/trunk/Documentation/hwmon/lm90 index 93d8e3d55150..0e8411710238 100644 --- a/trunk/Documentation/hwmon/lm90 +++ b/trunk/Documentation/hwmon/lm90 @@ -42,11 +42,6 @@ Supported chips: Addresses scanned: I2C 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 - * Maxim MAX6648 - Prefix: 'max6646' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 * Maxim MAX6649 Prefix: 'max6646' Addresses scanned: I2C 0x4c @@ -79,11 +74,6 @@ Supported chips: 0x4c, 0x4d and 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 - * Maxim MAX6692 - Prefix: 'max6646' - Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 Author: Jean Delvare diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 7643483bdd6a..d1cb2069e2f4 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -1320,13 +1320,8 @@ and is between 256 and 4096 characters. It is defined in the file memtest= [KNL,X86] Enable memtest Format: + range: 0,4 : pattern number default : 0 - Specifies the number of memtest passes to be - performed. Each pass selects another test - pattern from a given set of patterns. Memtest - fills the memory with this pattern, validates - memory contents and reserves bad memory - regions that are detected. meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. @@ -2344,8 +2339,6 @@ and is between 256 and 4096 characters. It is defined in the file tp720= [HW,PS2] - trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size. - trix= [HW,OSS] MediaTrix AudioTrix Pro Format: ,,,,,,,, diff --git a/trunk/Documentation/networking/ipv6.txt b/trunk/Documentation/networking/ipv6.txt deleted file mode 100644 index 268e5c103dd8..000000000000 --- a/trunk/Documentation/networking/ipv6.txt +++ /dev/null @@ -1,35 +0,0 @@ - -Options for the ipv6 module are supplied as parameters at load time. - -Module options may be given as command line arguments to the insmod -or modprobe command, but are usually specified in either the -/etc/modules.conf or /etc/modprobe.conf configuration file, or in a -distro-specific configuration file. - -The available ipv6 module parameters are listed below. If a parameter -is not specified the default value is used. - -The parameters are as follows: - -disable - - Specifies whether to load the IPv6 module, but disable all - its functionality. This might be used when another module - has a dependency on the IPv6 module being loaded, but no - IPv6 addresses or operations are desired. - - The possible values and their effects are: - - 0 - IPv6 is enabled. - - This is the default value. - - 1 - IPv6 is disabled. - - No IPv6 addresses will be added to interfaces, and - it will not be possible to open an IPv6 socket. - - A reboot is required to enable IPv6. - diff --git a/trunk/Documentation/x86/boot.txt b/trunk/Documentation/x86/boot.txt index e0203662f9e9..7b4596ac4120 100644 --- a/trunk/Documentation/x86/boot.txt +++ b/trunk/Documentation/x86/boot.txt @@ -158,7 +158,7 @@ Offset Proto Name Meaning 0202/4 2.00+ header Magic signature "HdrS" 0206/2 2.00+ version Boot protocol version supported 0208/4 2.00+ realmode_swtch Boot loader hook (see below) -020C/2 2.00+ start_sys_seg The load-low segment (0x1000) (obsolete) +020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) 020E/2 2.00+ kernel_version Pointer to kernel version string 0210/1 2.00+ type_of_loader Boot loader identifier 0211/1 2.00+ loadflags Boot protocol option flags @@ -170,11 +170,10 @@ Offset Proto Name Meaning 0224/2 2.01+ heap_end_ptr Free memory after setup end 0226/2 N/A pad1 Unused 0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line -022C/4 2.03+ ramdisk_max Highest legal initrd address +022C/4 2.03+ initrd_addr_max Highest legal initrd address 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/1 N/A pad2 Unused -0236/2 N/A pad3 Unused +0235/3 N/A pad2 Unused 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture 0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data @@ -300,14 +299,14 @@ Protocol: 2.00+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version 10.17. -Field name: realmode_swtch +Field name: readmode_swtch Type: modify (optional) Offset/size: 0x208/4 Protocol: 2.00+ Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) -Field name: start_sys_seg +Field name: start_sys Type: read Offset/size: 0x20c/2 Protocol: 2.00+ @@ -469,7 +468,7 @@ Protocol: 2.02+ zero, the kernel will assume that your boot loader does not support the 2.02+ protocol. -Field name: ramdisk_max +Field name: initrd_addr_max Type: read Offset/size: 0x22c/4 Protocol: 2.03+ @@ -543,10 +542,7 @@ Protocol: 2.08+ The payload may be compressed. The format of both the compressed and uncompressed data should be determined using the standard magic - numbers. The currently supported compression formats are gzip - (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA - (magic number 5D 00). The uncompressed payload is currently always ELF - (magic number 7F 45 4C 46). + numbers. Currently only gzip compressed ELF is used. Field name: payload_length Type: read diff --git a/trunk/Documentation/x86/earlyprintk.txt b/trunk/Documentation/x86/earlyprintk.txt deleted file mode 100644 index 607b1a016064..000000000000 --- a/trunk/Documentation/x86/earlyprintk.txt +++ /dev/null @@ -1,101 +0,0 @@ - -Mini-HOWTO for using the earlyprintk=dbgp boot option with a -USB2 Debug port key and a debug cable, on x86 systems. - -You need two computers, the 'USB debug key' special gadget and -and two USB cables, connected like this: - - [host/target] <-------> [USB debug key] <-------> [client/console] - -1. There are three specific hardware requirements: - - a.) Host/target system needs to have USB debug port capability. - - You can check this capability by looking at a 'Debug port' bit in - the lspci -vvv output: - - # lspci -vvv - ... - 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) - Subsystem: Lenovo ThinkPad T61 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- /proc/sysrq-trigger - - On the host/target system you should see this help line in "dmesg" output: - - SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) - - On the client/console system do: - - cat /dev/ttyUSB0 - - And you should see the help line above displayed shortly after you've - provoked it on the host system. - -If it does not work then please ask about it on the linux-kernel@vger.kernel.org -mailing list or contact the x86 maintainers. diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index c0a662d1c284..3c3ce2b20322 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -1469,6 +1469,8 @@ L: linux-acpi@vger.kernel.org S: Supported DOCUMENTATION (/Documentation directory) +P: Michael Kerrisk +M: mtk.manpages@gmail.com P: Randy Dunlap M: rdunlap@xenotime.net L: linux-doc@vger.kernel.org @@ -2883,7 +2885,7 @@ P: Michael Kerrisk M: mtk.manpages@gmail.com W: http://www.kernel.org/doc/man-pages L: linux-man@vger.kernel.org -S: Maintained +S: Supported MARVELL LIBERTAS WIRELESS DRIVER P: Dan Williams diff --git a/trunk/Makefile b/trunk/Makefile index 69b8091bfed1..d04ee0ad1dcc 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -533,9 +533,8 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif # Force gcc to behave correct even for buggy distributions -ifndef CONFIG_CC_STACKPROTECTOR +# Arch Makefiles may override this setting KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector) -endif ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls @@ -905,18 +904,12 @@ localver = $(subst $(space),, $(string) \ # and if the SCM is know a tag from the SCM is appended. # The appended tag is determined by the SCM used. # -# .scmversion is used when generating rpm packages so we do not loose -# the version information from the SCM when we do the build of the kernel -# from the copied source +# Currently, only git is supported. +# Other SCMs can edit scripts/setlocalversion and add the appropriate +# checks as needed. ifdef CONFIG_LOCALVERSION_AUTO - -ifeq ($(wildcard .scmversion),) - _localver-auto = $(shell $(CONFIG_SHELL) \ - $(srctree)/scripts/setlocalversion $(srctree)) -else - _localver-auto = $(shell cat .scmversion 2> /dev/null) -endif - + _localver-auto = $(shell $(CONFIG_SHELL) \ + $(srctree)/scripts/setlocalversion $(srctree)) localver-auto = $(LOCALVERSION)$(_localver-auto) endif @@ -1544,7 +1537,7 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) cmd_depmod = \ if [ -r System.map -a -x $(DEPMOD) ]; then \ $(DEPMOD) -ae -F System.map \ - $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \ + $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r) \ $(KERNELRELEASE); \ fi diff --git a/trunk/arch/alpha/include/asm/statfs.h b/trunk/arch/alpha/include/asm/statfs.h index ccd2e186bfd8..de35cd438a10 100644 --- a/trunk/arch/alpha/include/asm/statfs.h +++ b/trunk/arch/alpha/include/asm/statfs.h @@ -1,8 +1,6 @@ #ifndef _ALPHA_STATFS_H #define _ALPHA_STATFS_H -#include - /* Alpha is the only 64-bit platform with 32-bit statfs. And doesn't even seem to implement statfs64 */ #define __statfs_word __u32 diff --git a/trunk/arch/alpha/include/asm/swab.h b/trunk/arch/alpha/include/asm/swab.h index 4d682b16c7c4..68e7089e02d5 100644 --- a/trunk/arch/alpha/include/asm/swab.h +++ b/trunk/arch/alpha/include/asm/swab.h @@ -1,7 +1,7 @@ #ifndef _ALPHA_SWAB_H #define _ALPHA_SWAB_H -#include +#include #include #include diff --git a/trunk/arch/alpha/kernel/irq.c b/trunk/arch/alpha/kernel/irq.c index 7bc7489223f3..703731accda6 100644 --- a/trunk/arch/alpha/kernel/irq.c +++ b/trunk/arch/alpha/kernel/irq.c @@ -55,7 +55,7 @@ int irq_select_affinity(unsigned int irq) cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0); last_cpu = cpu; - cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + irq_desc[irq].affinity = cpumask_of_cpu(cpu); irq_desc[irq].chip->set_affinity(irq, cpumask_of(cpu)); return 0; } diff --git a/trunk/arch/alpha/mm/init.c b/trunk/arch/alpha/mm/init.c index af71d38c8e41..5d7a16eab312 100644 --- a/trunk/arch/alpha/mm/init.c +++ b/trunk/arch/alpha/mm/init.c @@ -189,21 +189,9 @@ callback_init(void * kernel_end) if (alpha_using_srm) { static struct vm_struct console_remap_vm; - unsigned long nr_pages = 0; - unsigned long vaddr; + unsigned long vaddr = VMALLOC_START; unsigned long i, j; - /* calculate needed size */ - for (i = 0; i < crb->map_entries; ++i) - nr_pages += crb->map[i].count; - - /* register the vm area */ - console_remap_vm.flags = VM_ALLOC; - console_remap_vm.size = nr_pages << PAGE_SHIFT; - vm_area_register_early(&console_remap_vm, PAGE_SIZE); - - vaddr = (unsigned long)console_remap_vm.addr; - /* Set up the third level PTEs and update the virtual addresses of the CRB entries. */ for (i = 0; i < crb->map_entries; ++i) { @@ -225,6 +213,12 @@ callback_init(void * kernel_end) vaddr += PAGE_SIZE; } } + + /* Let vmalloc know that we've allocated some space. */ + console_remap_vm.flags = VM_ALLOC; + console_remap_vm.addr = (void *) VMALLOC_START; + console_remap_vm.size = vaddr - VMALLOC_START; + vmlist = &console_remap_vm; } callback_init_done = 1; diff --git a/trunk/arch/arm/include/asm/a.out.h b/trunk/arch/arm/include/asm/a.out.h index 083894b2e3bc..79489fdcc8b8 100644 --- a/trunk/arch/arm/include/asm/a.out.h +++ b/trunk/arch/arm/include/asm/a.out.h @@ -2,7 +2,7 @@ #define __ARM_A_OUT_H__ #include -#include +#include struct exec { diff --git a/trunk/arch/arm/include/asm/setup.h b/trunk/arch/arm/include/asm/setup.h index ee1304f22f94..f2cd18a0932b 100644 --- a/trunk/arch/arm/include/asm/setup.h +++ b/trunk/arch/arm/include/asm/setup.h @@ -14,7 +14,7 @@ #ifndef __ASMARM_SETUP_H #define __ASMARM_SETUP_H -#include +#include #define COMMAND_LINE_SIZE 1024 diff --git a/trunk/arch/arm/include/asm/swab.h b/trunk/arch/arm/include/asm/swab.h index ca2bf2f6d6ea..27a689be0856 100644 --- a/trunk/arch/arm/include/asm/swab.h +++ b/trunk/arch/arm/include/asm/swab.h @@ -16,7 +16,7 @@ #define __ASM_ARM_SWAB_H #include -#include +#include #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) # define __SWAB_64_THRU_32__ diff --git a/trunk/arch/arm/kernel/irq.c b/trunk/arch/arm/kernel/irq.c index 45eacb5a2ecd..363db186cb93 100644 --- a/trunk/arch/arm/kernel/irq.c +++ b/trunk/arch/arm/kernel/irq.c @@ -104,11 +104,6 @@ static struct irq_desc bad_irq_desc = { .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), }; -#ifdef CONFIG_CPUMASK_OFFSTACK -/* We are not allocating bad_irq_desc.affinity or .pending_mask */ -#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." -#endif - /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -166,7 +161,7 @@ void __init init_IRQ(void) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; #ifdef CONFIG_SMP - cpumask_setall(bad_irq_desc.affinity); + bad_irq_desc.affinity = CPU_MASK_ALL; bad_irq_desc.cpu = smp_processor_id(); #endif init_arch_irq(); @@ -196,16 +191,15 @@ void migrate_irqs(void) struct irq_desc *desc = irq_desc + i; if (desc->cpu == cpu) { - unsigned int newcpu = cpumask_any_and(desc->affinity, - cpu_online_mask); - if (newcpu >= nr_cpu_ids) { + unsigned int newcpu = any_online_cpu(desc->affinity); + + if (newcpu == NR_CPUS) { if (printk_ratelimit()) printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", i, cpu); - cpumask_setall(desc->affinity); - newcpu = cpumask_any_and(desc->affinity, - cpu_online_mask); + cpus_setall(desc->affinity); + newcpu = any_online_cpu(desc->affinity); } route_irq(desc, i, newcpu); diff --git a/trunk/arch/arm/kernel/vmlinux.lds.S b/trunk/arch/arm/kernel/vmlinux.lds.S index 85598f7da407..00216071eaf7 100644 --- a/trunk/arch/arm/kernel/vmlinux.lds.S +++ b/trunk/arch/arm/kernel/vmlinux.lds.S @@ -65,7 +65,6 @@ SECTIONS #endif . = ALIGN(4096); __per_cpu_start = .; - *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; diff --git a/trunk/arch/arm/mach-at91/at91sam9263_devices.c b/trunk/arch/arm/mach-at91/at91sam9263_devices.c index b7f233242315..134af97ff340 100644 --- a/trunk/arch/arm/mach-at91/at91sam9263_devices.c +++ b/trunk/arch/arm/mach-at91/at91sam9263_devices.c @@ -347,111 +347,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} #endif -/* -------------------------------------------------------------------- - * Compact Flash (PCMCIA or IDE) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ - defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) - -static struct at91_cf_data cf0_data; - -static struct resource cf0_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_4, - .end = AT91_CHIPSELECT_4 + SZ_256M - 1, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - } -}; - -static struct platform_device cf0_device = { - .id = 0, - .dev = { - .platform_data = &cf0_data, - }, - .resource = cf0_resources, - .num_resources = ARRAY_SIZE(cf0_resources), -}; - -static struct at91_cf_data cf1_data; - -static struct resource cf1_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_5, - .end = AT91_CHIPSELECT_5 + SZ_256M - 1, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - } -}; - -static struct platform_device cf1_device = { - .id = 1, - .dev = { - .platform_data = &cf1_data, - }, - .resource = cf1_resources, - .num_resources = ARRAY_SIZE(cf1_resources), -}; - -void __init at91_add_device_cf(struct at91_cf_data *data) -{ - unsigned long ebi0_csa; - struct platform_device *pdev; - - if (!data) - return; - - /* - * assign CS4 or CS5 to SMC with Compact Flash logic support, - * we assume SMC timings are configured by board code, - * except True IDE where timings are controlled by driver - */ - ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - switch (data->chipselect) { - case 4: - at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ - ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1; - cf0_data = *data; - pdev = &cf0_device; - break; - case 5: - at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */ - ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2; - cf1_data = *data; - pdev = &cf1_device; - break; - default: - printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", - data->chipselect); - return; - } - at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); - - if (data->det_pin) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - - if (data->irq_pin) { - at91_set_gpio_input(data->irq_pin, 1); - at91_set_deglitch(data->irq_pin, 1); - } - - if (data->vcc_pin) - /* initially off */ - at91_set_gpio_output(data->vcc_pin, 0); - - /* enable EBI controlled pins */ - at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */ - at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */ - at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ - at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; - platform_device_register(pdev); -} -#else -void __init at91_add_device_cf(struct at91_cf_data *data) {} -#endif /* -------------------------------------------------------------------- * NAND / SmartMedia diff --git a/trunk/arch/arm/mach-at91/include/mach/board.h b/trunk/arch/arm/mach-at91/include/mach/board.h index 793fe7b25f36..0b3ae21b4565 100644 --- a/trunk/arch/arm/mach-at91/include/mach/board.h +++ b/trunk/arch/arm/mach-at91/include/mach/board.h @@ -56,9 +56,6 @@ struct at91_cf_data { u8 vcc_pin; /* power switching */ u8 rst_pin; /* card reset */ u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 }; extern void __init at91_add_device_cf(struct at91_cf_data *data); diff --git a/trunk/arch/arm/mach-omap2/board-ldp.c b/trunk/arch/arm/mach-omap2/board-ldp.c index 6031e179926b..f6a13451d1fd 100644 --- a/trunk/arch/arm/mach-omap2/board-ldp.c +++ b/trunk/arch/arm/mach-omap2/board-ldp.c @@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void) } ldp_smc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smc911x_resources[0].end = cs_mem_base + 0xff; + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; udelay(100); eth_gpio = LDP_SMC911X_GPIO; diff --git a/trunk/arch/arm/oprofile/op_model_mpcore.c b/trunk/arch/arm/oprofile/op_model_mpcore.c index 853d42bb8682..6d6bd5899240 100644 --- a/trunk/arch/arm/oprofile/op_model_mpcore.c +++ b/trunk/arch/arm/oprofile/op_model_mpcore.c @@ -263,7 +263,7 @@ static void em_route_irq(int irq, unsigned int cpu) const struct cpumask *mask = cpumask_of(cpu); spin_lock_irq(&desc->lock); - cpumask_copy(desc->affinity, mask); + desc->affinity = *mask; desc->chip->set_affinity(irq, mask); spin_unlock_irq(&desc->lock); } diff --git a/trunk/arch/avr32/Kconfig b/trunk/arch/avr32/Kconfig index 05fe3053dcae..b189680d18b0 100644 --- a/trunk/arch/avr32/Kconfig +++ b/trunk/arch/avr32/Kconfig @@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt" config QUICKLIST def_bool y -config HAVE_ARCH_BOOTMEM +config HAVE_ARCH_BOOTMEM_NODE def_bool n config ARCH_HAVE_MEMORY_PRESENT diff --git a/trunk/arch/avr32/include/asm/swab.h b/trunk/arch/avr32/include/asm/swab.h index 14cc737bbca6..a14aa5b46d98 100644 --- a/trunk/arch/avr32/include/asm/swab.h +++ b/trunk/arch/avr32/include/asm/swab.h @@ -4,7 +4,7 @@ #ifndef __ASM_AVR32_SWAB_H #define __ASM_AVR32_SWAB_H -#include +#include #include #define __SWAB_64_THRU_32__ diff --git a/trunk/arch/blackfin/Kconfig b/trunk/arch/blackfin/Kconfig index 0c1f86e3e44a..8f1f97d56e1e 100644 --- a/trunk/arch/blackfin/Kconfig +++ b/trunk/arch/blackfin/Kconfig @@ -1129,7 +1129,6 @@ endchoice config PM_WAKEUP_BY_GPIO bool "Allow Wakeup from Standby by GPIO" - depends on PM && !BF54x config PM_WAKEUP_GPIO_NUMBER int "GPIO number" @@ -1169,12 +1168,6 @@ config PM_BFIN_WAKE_GP default n help Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) - (all processors, except ADSP-BF549). This option sets - the general-purpose wake-up enable (GPWE) control bit to enable - wake-up upon detection of an active low signal on the /GPW (PH7) pin. - On ADSP-BF549 this option enables the the same functionality on the - /MRXON pin also PH7. - endmenu menu "CPU Frequency scaling" diff --git a/trunk/arch/blackfin/Kconfig.debug b/trunk/arch/blackfin/Kconfig.debug index 79e7e63ab709..5f981d9ca625 100644 --- a/trunk/arch/blackfin/Kconfig.debug +++ b/trunk/arch/blackfin/Kconfig.debug @@ -21,6 +21,12 @@ config DEBUG_STACK_USAGE config HAVE_ARCH_KGDB def_bool y +config KGDB_TESTCASE + tristate "KGDB: for test case in expect" + default n + help + This is a kgdb test case for automated testing. + config DEBUG_VERBOSE bool "Verbose fault messages" default y diff --git a/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig b/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig index 281f4b60e603..4fdb9e04759f 100644 --- a/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Fri Feb 20 10:01:44 2009 +# Linux kernel version: 2.6.28-rc2 +# Fri Jan 9 17:58:41 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -133,15 +133,10 @@ CONFIG_BF518=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set # CONFIG_BF542 is not set -# CONFIG_BF542M is not set # CONFIG_BF544 is not set -# CONFIG_BF544M is not set # CONFIG_BF547 is not set -# CONFIG_BF547M is not set # CONFIG_BF548 is not set -# CONFIG_BF548M is not set # CONFIG_BF549 is not set -# CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 CONFIG_BF_REV_MAX=2 @@ -431,17 +426,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -CONFIG_NET_DSA=y -# CONFIG_NET_DSA_TAG_DSA is not set -# CONFIG_NET_DSA_TAG_EDSA is not set -# CONFIG_NET_DSA_TAG_TRAILER is not set -CONFIG_NET_DSA_TAG_STPID=y -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6060 is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -CONFIG_NET_DSA_KSZ8893M=y +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -544,8 +529,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # # Self-contained MTD device drivers # -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -578,9 +561,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set -# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -626,7 +607,6 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set -# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -784,23 +764,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_BFIN=y -# CONFIG_SPI_BFIN_LOCK is not set -# CONFIG_SPI_BITBANG is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -824,10 +788,8 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set -# CONFIG_REGULATOR is not set # # Multimedia devices @@ -899,18 +861,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1108,20 +1062,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB_TESTCASE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y # CONFIG_DEBUG_HWERR is not set @@ -1154,7 +1100,6 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig index a50050f17706..833128b39724 100644 --- a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_MPU is not set # diff --git a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig index 0a2a00d63887..334c94b51c40 100644 --- a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_MPU is not set # diff --git a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig index eb027587a355..9d733436e300 100644 --- a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_MPU is not set # diff --git a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig index 9e62b9f40eb1..4fb4108d3103 100644 --- a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig @@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_MPU is not set # @@ -568,7 +568,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_BFIN is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=m # CONFIG_MTD_ONENAND is not set # diff --git a/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig index dd6ad6be1c87..cb32f5624a1b 100644 --- a/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_MPU is not set # diff --git a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig index 6bc2fb1b2a70..0f8697618aa5 100644 --- a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set @@ -680,7 +680,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) diff --git a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig index 69714fb3e608..042c7adfccfa 100644 --- a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set diff --git a/trunk/arch/blackfin/configs/BlackStamp_defconfig b/trunk/arch/blackfin/configs/BlackStamp_defconfig index 017c6ea071b5..3a20e281d23c 100644 --- a/trunk/arch/blackfin/configs/BlackStamp_defconfig +++ b/trunk/arch/blackfin/configs/BlackStamp_defconfig @@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_MPU is not set # diff --git a/trunk/arch/blackfin/configs/CM-BF527_defconfig b/trunk/arch/blackfin/configs/CM-BF527_defconfig index d880ef786770..865ed85a5760 100644 --- a/trunk/arch/blackfin/configs/CM-BF527_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF527_defconfig @@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y # CONFIG_MPU is not set # diff --git a/trunk/arch/blackfin/configs/CM-BF548_defconfig b/trunk/arch/blackfin/configs/CM-BF548_defconfig index f410430b4e3d..efe9741b1f14 100644 --- a/trunk/arch/blackfin/configs/CM-BF548_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF548_defconfig @@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set @@ -595,7 +595,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) diff --git a/trunk/arch/blackfin/configs/IP0X_defconfig b/trunk/arch/blackfin/configs/IP0X_defconfig index 7db93874c987..eae83b5de92f 100644 --- a/trunk/arch/blackfin/configs/IP0X_defconfig +++ b/trunk/arch/blackfin/configs/IP0X_defconfig @@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_SCSI=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) diff --git a/trunk/arch/blackfin/configs/SRV1_defconfig b/trunk/arch/blackfin/configs/SRV1_defconfig index a46529c6ade3..fa580affc9d6 100644 --- a/trunk/arch/blackfin/configs/SRV1_defconfig +++ b/trunk/arch/blackfin/configs/SRV1_defconfig @@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # diff --git a/trunk/arch/blackfin/include/asm/Kbuild b/trunk/arch/blackfin/include/asm/Kbuild index 09c31418cc08..606ecfdcc962 100644 --- a/trunk/arch/blackfin/include/asm/Kbuild +++ b/trunk/arch/blackfin/include/asm/Kbuild @@ -1,4 +1,3 @@ include include/asm-generic/Kbuild.asm -unifdef-y += bfin_sport.h unifdef-y += fixed_code.h diff --git a/trunk/arch/blackfin/include/asm/bfin_sport.h b/trunk/arch/blackfin/include/asm/bfin_sport.h index 65a651db5b07..fe88a2c19213 100644 --- a/trunk/arch/blackfin/include/asm/bfin_sport.h +++ b/trunk/arch/blackfin/include/asm/bfin_sport.h @@ -1,9 +1,30 @@ /* - * bfin_sport.h - userspace header for bfin sport driver + * File: include/asm-blackfin/bfin_sport.h + * Based on: + * Author: Roy Huang (roy.huang@analog.com) * - * Copyright 2004-2008 Analog Devices Inc. + * Created: Thu Aug. 24 2006 + * Description: * - * Licensed under the GPL-2 or later. + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef __BFIN_SPORT_H__ @@ -21,10 +42,11 @@ #define NORM_FORMAT 0x0 #define ALAW_FORMAT 0x2 #define ULAW_FORMAT 0x3 +struct sport_register; /* Function driver which use sport must initialize the structure */ struct sport_config { - /* TDM (multichannels), I2S or other mode */ + /*TDM (multichannels), I2S or other mode */ unsigned int mode:3; /* if TDM mode is selected, channels must be set */ @@ -50,18 +72,12 @@ struct sport_config { int serial_clk; int fsync_clk; - unsigned int data_format:2; /* Normal, u-law or a-law */ + unsigned int data_format:2; /*Normal, u-law or a-law */ int word_len; /* How length of the word in bits, 3-32 bits */ int dma_enabled; }; -/* Userspace interface */ -#define SPORT_IOC_MAGIC 'P' -#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) - -#ifdef __KERNEL__ - struct sport_register { unsigned short tcr1; unsigned short reserved0; @@ -101,6 +117,9 @@ struct sport_register { unsigned long mrcs3; }; +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) + struct sport_dev { struct cdev cdev; /* Char device structure */ @@ -130,8 +149,6 @@ struct sport_dev { struct sport_config config; }; -#endif - #define SPORT_TCR1 0 #define SPORT_TCR2 1 #define SPORT_TCLKDIV 2 @@ -152,4 +169,4 @@ struct sport_dev { #define SPORT_MRCS2 22 #define SPORT_MRCS3 23 -#endif +#endif /*__BFIN_SPORT_H__*/ diff --git a/trunk/arch/blackfin/include/asm/ipipe.h b/trunk/arch/blackfin/include/asm/ipipe.h index 343b56361ec9..76f53d8b9a0d 100644 --- a/trunk/arch/blackfin/include/asm/ipipe.h +++ b/trunk/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include #include -#define IPIPE_ARCH_STRING "1.9-00" +#define IPIPE_ARCH_STRING "1.8-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 9 +#define IPIPE_MINOR_NUMBER 8 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP @@ -83,9 +83,9 @@ struct ipipe_sysinfo { "%2 = CYCLES2\n" \ "CC = %2 == %0\n" \ "if ! CC jump 1b\n" \ - : "=d,a" (((unsigned long *)&t)[1]), \ - "=d,a" (((unsigned long *)&t)[0]), \ - "=d,a" (__cy2) \ + : "=r" (((unsigned long *)&t)[1]), \ + "=r" (((unsigned long *)&t)[0]), \ + "=r" (__cy2) \ : /*no input*/ : "CC"); \ t; \ }) @@ -118,40 +118,35 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, #define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq)) -static inline int __ipipe_check_tickdev(const char *devname) -{ - return 1; -} +#define __ipipe_lock_root() \ + set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) -static inline void __ipipe_lock_root(void) -{ - set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); -} - -static inline void __ipipe_unlock_root(void) -{ - clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); -} +#define __ipipe_unlock_root() \ + clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) void __ipipe_enable_pipeline(void); #define __ipipe_hook_critical_ipi(ipd) do { } while (0) -#define __ipipe_sync_pipeline ___ipipe_sync_pipeline -void ___ipipe_sync_pipeline(unsigned long syncmask); +#define __ipipe_sync_pipeline(syncmask) \ + do { \ + struct ipipe_domain *ipd = ipipe_current_domain; \ + if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \ + __ipipe_sync_stage(syncmask); \ + } while (0) void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs); int __ipipe_get_irq_priority(unsigned irq); +int __ipipe_get_irqthread_priority(unsigned irq); + void __ipipe_stall_root_raw(void); void __ipipe_unstall_root_raw(void); void __ipipe_serial_debug(const char *fmt, ...); -asmlinkage void __ipipe_call_irqtail(unsigned long addr); - DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs); extern unsigned long __ipipe_core_clock; @@ -167,25 +162,42 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) #define __ipipe_run_irqtail() /* Must be a macro */ \ do { \ + asmlinkage void __ipipe_call_irqtail(void); \ unsigned long __pending; \ - CSYNC(); \ + CSYNC(); \ __pending = bfin_read_IPEND(); \ if (__pending & 0x8000) { \ __pending &= ~0x8010; \ if (__pending && (__pending & (__pending - 1)) == 0) \ - __ipipe_call_irqtail(__ipipe_irq_tail_hook); \ + __ipipe_call_irqtail(); \ } \ } while (0) #define __ipipe_run_isr(ipd, irq) \ do { \ if (ipd == ipipe_root_domain) { \ - local_irq_enable_hw(); \ - if (ipipe_virtual_irq_p(irq)) \ + /* \ + * Note: the I-pipe implements a threaded interrupt model on \ + * this arch for Linux external IRQs. The interrupt handler we \ + * call here only wakes up the associated IRQ thread. \ + */ \ + if (ipipe_virtual_irq_p(irq)) { \ + /* No irqtail here; virtual interrupts have no effect \ + on IPEND so there is no need for processing \ + deferral. */ \ + local_irq_enable_nohead(ipd); \ ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ - else \ + local_irq_disable_nohead(ipd); \ + } else \ + /* \ + * No need to run the irqtail here either; \ + * we can't be preempted by hw IRQs, so \ + * non-Linux IRQs cannot stack over the short \ + * thread wakeup code. Which in turn means \ + * that no irqtail condition could be pending \ + * for domains above Linux in the pipeline. \ + */ \ ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \ - local_irq_disable_hw(); \ } else { \ __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ local_irq_enable_nohead(ipd); \ @@ -205,24 +217,42 @@ void ipipe_init_irq_threads(void); int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); -#ifdef CONFIG_GENERIC_CLOCKEVENTS -#define IRQ_SYSTMR IRQ_CORETMR -#define IRQ_PRIOTMR IRQ_CORETMR -#else +#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS) +#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS) + #define IRQ_SYSTMR IRQ_TIMER0 #define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 -#endif -#ifdef CONFIG_BF561 +#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) +#define PRIO_GPIODEMUX(irq) CONFIG_PFA +#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537) +#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA +#elif defined(CONFIG_BF52x) +#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \ + (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \ + (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \ + -1) +#elif defined(CONFIG_BF561) +#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \ + (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \ + (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \ + -1) #define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val) #define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS() #elif defined(CONFIG_BF54x) +#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \ + (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \ + (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \ + (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \ + -1) #define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val) #define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val) +#else +# error "no PRIO_GPIODEMUX() for this part" #endif #define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0) @@ -245,6 +275,4 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); #endif /* !CONFIG_IPIPE */ -#define ipipe_update_tick_evtdev(evtdev) do { } while (0) - #endif /* !__ASM_BLACKFIN_IPIPE_H */ diff --git a/trunk/arch/blackfin/include/asm/ipipe_base.h b/trunk/arch/blackfin/include/asm/ipipe_base.h index 3e8acbd1a3be..cb1025aeabcf 100644 --- a/trunk/arch/blackfin/include/asm/ipipe_base.h +++ b/trunk/arch/blackfin/include/asm/ipipe_base.h @@ -1,5 +1,5 @@ /* -*- linux-c -*- - * include/asm-blackfin/ipipe_base.h + * include/asm-blackfin/_baseipipe.h * * Copyright (C) 2007 Philippe Gerum. * @@ -27,9 +27,8 @@ #define IPIPE_NR_XIRQS NR_IRQS #define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */ -/* Blackfin-specific, per-cpu pipeline status */ -#define IPIPE_SYNCDEFER_FLAG 15 -#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK) +/* Blackfin-specific, global domain flags */ +#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */ /* Blackfin traps -- i.e. exception vector numbers */ #define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */ @@ -49,6 +48,11 @@ #ifndef __ASSEMBLY__ +#include + +extern int test_bit(int nr, const void *addr); + + extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ static inline void __ipipe_stall_root(void) diff --git a/trunk/arch/blackfin/include/asm/irq.h b/trunk/arch/blackfin/include/asm/irq.h index 7645e85a5f6f..3d977909ce7d 100644 --- a/trunk/arch/blackfin/include/asm/irq.h +++ b/trunk/arch/blackfin/include/asm/irq.h @@ -61,38 +61,20 @@ void __ipipe_restore_root(unsigned long flags); #define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags)) #define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x) -#define local_save_flags(x) \ - do { \ - (x) = __ipipe_test_root() ? \ - __all_masked_irq_flags : bfin_irq_flags; \ - barrier(); \ - } while (0) - -#define local_irq_save(x) \ - do { \ - (x) = __ipipe_test_and_stall_root() ? \ +#define local_save_flags(x) \ + do { \ + (x) = __ipipe_test_root() ? \ __all_masked_irq_flags : bfin_irq_flags; \ - barrier(); \ } while (0) -static inline void local_irq_restore(unsigned long x) -{ - barrier(); - __ipipe_restore_root(x == __all_masked_irq_flags); -} - -#define local_irq_disable() \ - do { \ - __ipipe_stall_root(); \ - barrier(); \ +#define local_irq_save(x) \ + do { \ + (x) = __ipipe_test_and_stall_root(); \ } while (0) -static inline void local_irq_enable(void) -{ - barrier(); - __ipipe_unstall_root(); -} - +#define local_irq_restore(x) __ipipe_restore_root(x) +#define local_irq_disable() __ipipe_stall_root() +#define local_irq_enable() __ipipe_unstall_root() #define irqs_disabled() __ipipe_test_root() #define local_save_flags_hw(x) \ diff --git a/trunk/arch/blackfin/include/asm/percpu.h b/trunk/arch/blackfin/include/asm/percpu.h index c94c7bc88c71..797c0c165069 100644 --- a/trunk/arch/blackfin/include/asm/percpu.h +++ b/trunk/arch/blackfin/include/asm/percpu.h @@ -3,4 +3,14 @@ #include +#ifdef CONFIG_MODULES +#define PERCPU_MODULE_RESERVE 8192 +#else +#define PERCPU_MODULE_RESERVE 0 +#endif + +#define PERCPU_ENOUGH_ROOM \ + (ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \ + PERCPU_MODULE_RESERVE) + #endif /* __ARCH_BLACKFIN_PERCPU__ */ diff --git a/trunk/arch/blackfin/include/asm/swab.h b/trunk/arch/blackfin/include/asm/swab.h index 6403ad2932eb..69a051b612bd 100644 --- a/trunk/arch/blackfin/include/asm/swab.h +++ b/trunk/arch/blackfin/include/asm/swab.h @@ -1,7 +1,7 @@ #ifndef _BLACKFIN_SWAB_H #define _BLACKFIN_SWAB_H -#include +#include #include #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) diff --git a/trunk/arch/blackfin/include/asm/thread_info.h b/trunk/arch/blackfin/include/asm/thread_info.h index 2920087516f2..e721ce55956c 100644 --- a/trunk/arch/blackfin/include/asm/thread_info.h +++ b/trunk/arch/blackfin/include/asm/thread_info.h @@ -122,7 +122,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 4 #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_FREEZE 6 /* is freezing for suspend */ -#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1< #include +static int create_irq_threads; + DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs); +static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask); + +static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count); + asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); static void __ipipe_no_irqtail(void); @@ -87,7 +93,6 @@ void __ipipe_enable_pipeline(void) */ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) { - struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); struct ipipe_domain *this_domain, *next_domain; struct list_head *head, *pos; int m_ack, s = -1; @@ -99,6 +104,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * interrupt. */ m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR); + this_domain = ipipe_current_domain; if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control))) @@ -108,28 +114,49 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) next_domain = list_entry(head, struct ipipe_domain, p_link); if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) { if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) - next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); - if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); + next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); + if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); __ipipe_dispatch_wired(next_domain, irq); - goto out; + goto finalize; + return; } } /* Ack the interrupt. */ pos = head; + while (pos != &__ipipe_pipeline) { next_domain = list_entry(pos, struct ipipe_domain, p_link); + /* + * For each domain handling the incoming IRQ, mark it + * as pending in its log. + */ if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) { + /* + * Domains that handle this IRQ are polled for + * acknowledging it by decreasing priority + * order. The interrupt must be made pending + * _first_ in the domain's status flags before + * the PIC is unlocked. + */ __ipipe_set_irq_pending(next_domain, irq); + if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) { - next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); + next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); m_ack = 1; } } + + /* + * If the domain does not want the IRQ to be passed + * down the interrupt pipe, exit the loop now. + */ if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control)) break; + pos = next_domain->p_link.next; } @@ -139,24 +166,18 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * immediately to the current domain if the interrupt has been * marked as 'sticky'. This search does not go beyond the * current domain in the pipeline. We also enforce the - * additional root stage lock (blackfin-specific). - */ - if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); + * additional root stage lock (blackfin-specific). */ - /* - * If the interrupt preempted the head domain, then do not - * even try to walk the pipeline, unless an interrupt is - * pending for it. - */ - if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) && - ipipe_head_cpudom_var(irqpend_himask) == 0) - goto out; + if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); +finalize: __ipipe_walk_pipeline(head); -out: + if (!s) - __clear_bit(IPIPE_STALL_FLAG, &p->status); + __clear_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); } int __ipipe_check_root(void) @@ -166,7 +187,7 @@ int __ipipe_check_root(void) void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_to_desc(irq); + struct irq_desc *desc = irq_desc + irq; int prio = desc->ic_prio; desc->depth = 0; @@ -178,7 +199,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc); void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_to_desc(irq); + struct irq_desc *desc = irq_desc + irq; int prio = desc->ic_prio; if (ipd != &ipipe_root && @@ -215,18 +236,15 @@ int __ipipe_syscall_root(struct pt_regs *regs) { unsigned long flags; - /* - * We need to run the IRQ tail hook whenever we don't + /* We need to run the IRQ tail hook whenever we don't * propagate a syscall to higher domains, because we know that * important operations might be pending there (e.g. Xenomai - * deferred rescheduling). - */ + * deferred rescheduling). */ - if (regs->orig_p0 < NR_syscalls) { + if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) { void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; hook(); - if ((current->flags & PF_EVNOTIFY) == 0) - return 0; + return 0; } /* @@ -294,46 +312,112 @@ int ipipe_trigger_irq(unsigned irq) { unsigned long flags; -#ifdef CONFIG_IPIPE_DEBUG if (irq >= IPIPE_NR_IRQS || (ipipe_virtual_irq_p(irq) && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map))) return -EINVAL; -#endif local_irq_save_hw(flags); + __ipipe_handle_irq(irq, NULL); + local_irq_restore_hw(flags); return 1; } -asmlinkage void __ipipe_sync_root(void) +/* Move Linux IRQ to threads. */ + +static int do_irqd(void *__desc) { - unsigned long flags; + struct irq_desc *desc = __desc; + unsigned irq = desc - irq_desc; + int thrprio = desc->thr_prio; + int thrmask = 1 << thrprio; + int cpu = smp_processor_id(); + cpumask_t cpumask; + + sigfillset(¤t->blocked); + current->flags |= PF_NOFREEZE; + cpumask = cpumask_of_cpu(cpu); + set_cpus_allowed(current, cpumask); + ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio); + + while (!kthread_should_stop()) { + local_irq_disable(); + if (!(desc->status & IRQ_SCHEDULED)) { + set_current_state(TASK_INTERRUPTIBLE); +resched: + local_irq_enable(); + schedule(); + local_irq_disable(); + } + __set_current_state(TASK_RUNNING); + /* + * If higher priority interrupt servers are ready to + * run, reschedule immediately. We need this for the + * GPIO demux IRQ handler to unmask the interrupt line + * _last_, after all GPIO IRQs have run. + */ + if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1))) + goto resched; + if (--per_cpu(pending_irq_count[thrprio], cpu) == 0) + per_cpu(pending_irqthread_mask, cpu) &= ~thrmask; + desc->status &= ~IRQ_SCHEDULED; + desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); + local_irq_enable(); + } + __set_current_state(TASK_RUNNING); + return 0; +} - BUG_ON(irqs_disabled()); +static void kick_irqd(unsigned irq, void *cookie) +{ + struct irq_desc *desc = irq_desc + irq; + int thrprio = desc->thr_prio; + int thrmask = 1 << thrprio; + int cpu = smp_processor_id(); + + if (!(desc->status & IRQ_SCHEDULED)) { + desc->status |= IRQ_SCHEDULED; + per_cpu(pending_irqthread_mask, cpu) |= thrmask; + ++per_cpu(pending_irq_count[thrprio], cpu); + wake_up_process(desc->thread); + } +} - local_irq_save_hw(flags); +int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc) +{ + if (desc->thread || !create_irq_threads) + return 0; - clear_thread_flag(TIF_IRQ_SYNC); + desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq); + if (desc->thread == NULL) { + printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq); + return -ENOMEM; + } - if (ipipe_root_cpudom_var(irqpend_himask) != 0) - __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY); + wake_up_process(desc->thread); - local_irq_restore_hw(flags); + desc->thr_handler = ipipe_root_domain->irqs[irq].handler; + ipipe_root_domain->irqs[irq].handler = &kick_irqd; + + return 0; } -void ___ipipe_sync_pipeline(unsigned long syncmask) +void __init ipipe_init_irq_threads(void) { - struct ipipe_domain *ipd = ipipe_current_domain; + unsigned irq; + struct irq_desc *desc; - if (ipd == ipipe_root_domain) { - if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status))) - return; - } + create_irq_threads = 1; - __ipipe_sync_stage(syncmask); + for (irq = 0; irq < NR_IRQS; irq++) { + desc = irq_desc + irq; + if (desc->action != NULL || + (desc->status & IRQ_NOREQUEST) != 0) + ipipe_start_irq_thread(irq, desc); + } } EXPORT_SYMBOL(show_stack); diff --git a/trunk/arch/blackfin/kernel/irqchip.c b/trunk/arch/blackfin/kernel/irqchip.c index 1ab5b532ec72..75724eee6494 100644 --- a/trunk/arch/blackfin/kernel/irqchip.c +++ b/trunk/arch/blackfin/kernel/irqchip.c @@ -70,11 +70,6 @@ static struct irq_desc bad_irq_desc = { #endif }; -#ifdef CONFIG_CPUMASK_OFFSTACK -/* We are not allocating a variable-sized bad_irq_desc.affinity */ -#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK." -#endif - int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, j; @@ -149,15 +144,11 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) #endif generic_handle_irq(irq); -#ifndef CONFIG_IPIPE - /* - * If we're the only interrupt running (ignoring IRQ15 which - * is for syscalls), lower our priority to IRQ14 so that - * softirqs run at that level. If there's another, - * lower-level interrupt, irq_exit will defer softirqs to - * that. If the interrupt pipeline is enabled, we are already - * running at IRQ14 priority, so we don't need this code. - */ +#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */ + /* If we're the only interrupt running (ignoring IRQ15 which is for + syscalls), lower our priority to IRQ14 so that softirqs run at + that level. If there's another, lower-level interrupt, irq_exit + will defer softirqs to that. */ CSYNC(); pending = bfin_read_IPEND() & ~0x8000; other_ints = pending & (pending - 1); diff --git a/trunk/arch/blackfin/kernel/kgdb_test.c b/trunk/arch/blackfin/kernel/kgdb_test.c index dbcf3e45cb0b..3dba9c17304a 100644 --- a/trunk/arch/blackfin/kernel/kgdb_test.c +++ b/trunk/arch/blackfin/kernel/kgdb_test.c @@ -20,7 +20,6 @@ static char cmdline[256]; static unsigned long len; -#ifndef CONFIG_SMP static int num1 __attribute__((l1_data)); void kgdb_l1_test(void) __attribute__((l1_text)); @@ -33,8 +32,6 @@ void kgdb_l1_test(void) printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); return ; } -#endif - #if L2_LENGTH static int num2 __attribute__((l2)); @@ -62,12 +59,10 @@ int kgdb_test(char *name, int len, int count, int z) static int test_proc_output(char *buf) { kgdb_test("hello world!", 12, 0x55, 0x10); -#ifndef CONFIG_SMP kgdb_l1_test(); -#endif -#if L2_LENGTH + #if L2_LENGTH kgdb_l2_test(); -#endif + #endif return 0; } diff --git a/trunk/arch/blackfin/kernel/ptrace.c b/trunk/arch/blackfin/kernel/ptrace.c index d76618db50df..594e325b40e4 100644 --- a/trunk/arch/blackfin/kernel/ptrace.c +++ b/trunk/arch/blackfin/kernel/ptrace.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #define TEXT_OFFSET 0 @@ -241,7 +240,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(tmp) <= FIXED_CODE_END) { - copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp)); + memcpy(&tmp, (const void *)(addr), sizeof(tmp)); copied = sizeof(tmp); } else @@ -321,7 +320,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(data) <= FIXED_CODE_END) { - copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data)); + memcpy((void *)(addr), &data, sizeof(data)); copied = sizeof(data); } else diff --git a/trunk/arch/blackfin/kernel/setup.c b/trunk/arch/blackfin/kernel/setup.c index a58687bdee6a..e5c116230800 100644 --- a/trunk/arch/blackfin/kernel/setup.c +++ b/trunk/arch/blackfin/kernel/setup.c @@ -889,10 +889,6 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } - /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ - if (bfin_cpuid() == 0x27de && bfin_revid() == 1) - panic("You can't run on this processor due to 05000448\n"); - printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", @@ -1145,12 +1141,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) icache_size = 0; seq_printf(m, "cache size\t: %d KB(L1 icache) " - "%d KB(L1 dcache%s) %d KB(L2 cache)\n", + "%d KB(L1 dcache-%s) %d KB(L2 cache)\n", icache_size, dcache_size, #if defined CONFIG_BFIN_WB - "-wb" + "wb" #elif defined CONFIG_BFIN_WT - "-wt" + "wt" #endif "", 0); diff --git a/trunk/arch/blackfin/kernel/time.c b/trunk/arch/blackfin/kernel/time.c index 1bbacfbd4c5d..172b4c588467 100644 --- a/trunk/arch/blackfin/kernel/time.c +++ b/trunk/arch/blackfin/kernel/time.c @@ -134,10 +134,7 @@ irqreturn_t timer_interrupt(int irq, void *dummy) write_seqlock(&xtime_lock); #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) - /* - * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is - * enabled. - */ +/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */ if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { #endif do_timer(1); diff --git a/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c b/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c index 41f2eacfef20..0e175342112e 100644 --- a/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -113,6 +113,7 @@ static struct platform_device bfin_mac_device = { .name = "bfin_mac", .dev.platform_data = &bfin_mii_bus, }; +#endif #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) static struct dsa_platform_data ksz8893m_switch_data = { @@ -131,7 +132,6 @@ static struct platform_device ksz8893m_switch_device = { .dev.platform_data = &ksz8893m_switch_data, }; #endif -#endif #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -171,7 +171,6 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) /* SPI SWITCH CHIP */ @@ -180,11 +179,10 @@ static struct bfin5xx_spi_chip spi_switch_info = { .bits_per_word = 8, }; #endif -#endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -261,7 +259,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) { @@ -274,15 +271,24 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { - .modalias = "mmc_spi", + .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif @@ -624,10 +630,11 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mii_bus, &bfin_mac_device, +#endif + #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) &ksz8893m_switch_device, #endif -#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf518/include/mach/anomaly.h index c847bb101076..e5b4bef0edae 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf518/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2009 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List + * - ???? */ #ifndef _MACH_ANOMALY_H_ @@ -19,8 +19,6 @@ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ -#define ANOMALY_05000254 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ @@ -55,12 +53,6 @@ #define ANOMALY_05000443 (1) /* Incorrect L1 Instruction Bank B Memory Map Location */ #define ANOMALY_05000444 (1) -/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ -#define ANOMALY_05000452 (1) -/* PWM_TRIPB Signal Not Available on PG10 */ -#define ANOMALY_05000453 (1) -/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */ -#define ANOMALY_05000455 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -73,20 +65,15 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) -#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) -#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (0) #define ANOMALY_05000363 (0) -#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) -#define ANOMALY_05000447 (0) -#define ANOMALY_05000448 (0) #endif diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/trunk/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index e21c1c3e4ec7..b50a63b975a2 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART0_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART1_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c b/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c index 48e69eecdba4..856c097b5317 100644 --- a/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -585,13 +585,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { - .modalias = "mmc_spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c b/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c index 7fe480e4ebe8..83606fcdde27 100644 --- a/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -366,13 +366,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { - .modalias = "mmc_spi", + .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf527/include/mach/anomaly.h index df6808d8a6ef..035e8d835058 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf527/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2009 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -167,16 +167,12 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) -#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) -#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) #define ANOMALY_05000412 (0) -#define ANOMALY_05000447 (0) -#define ANOMALY_05000448 (0) #endif diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/trunk/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index e8c41fd842b5..75722d6008b0 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART0_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART1_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/trunk/arch/blackfin/mach-bf533/boards/Kconfig b/trunk/arch/blackfin/mach-bf533/boards/Kconfig index 8d8b3e7321e6..308c98dc5aba 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/Kconfig +++ b/trunk/arch/blackfin/mach-bf533/boards/Kconfig @@ -38,4 +38,9 @@ config BFIN532_IP0X help Core support for IP04/IP04 open hardware IP-PBX. +config GENERIC_BF533_BOARD + bool "Generic" + help + Generic or Custom board support. + endchoice diff --git a/trunk/arch/blackfin/mach-bf533/boards/Makefile b/trunk/arch/blackfin/mach-bf533/boards/Makefile index ff1e832f80d2..9afbe72b484f 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/Makefile +++ b/trunk/arch/blackfin/mach-bf533/boards/Makefile @@ -2,6 +2,7 @@ # arch/blackfin/mach-bf533/boards/Makefile # +obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o diff --git a/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c b/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c index 0765872a8ada..015c18f85e7f 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -129,13 +129,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, { - .modalias = "mmc_spi", + .modalias = "spi_mmc", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c b/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c index e8974878d8c2..e7061c7e8c42 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/trunk/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -138,13 +138,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, { - .modalias = "mmc_spi", + .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf533/boards/generic_board.c b/trunk/arch/blackfin/mach-bf533/boards/generic_board.c new file mode 100644 index 000000000000..986eeec53b1f --- /dev/null +++ b/trunk/arch/blackfin/mach-bf533/boards/generic_board.c @@ -0,0 +1,126 @@ +/* + * File: arch/blackfin/mach-bf533/generic_board.c + * Based on: arch/blackfin/mach-bf533/ezkit.c + * Author: Aidan Williams + * + * Created: 2005 + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "UNKNOWN BOARD"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#endif + +static struct platform_device *generic_board_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif +}; + +static int __init generic_board_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); +} + +arch_initcall(generic_board_init); diff --git a/trunk/arch/blackfin/mach-bf533/boards/ip0x.c b/trunk/arch/blackfin/mach-bf533/boards/ip0x.c index f19b63378b12..e30b1b7d1442 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/trunk/arch/blackfin/mach-bf533/boards/ip0x.c @@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { /* * CPOL (Clock Polarity) * 0 - Active high SCK @@ -152,13 +152,14 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { - .modalias = "mmc_spi", + .modalias = "spi_mmc", .max_speed_hz = 2, .bus_num = 1, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, }, #endif }; diff --git a/trunk/arch/blackfin/mach-bf533/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf533/include/mach/anomaly.h index 1cf893e2e55b..0d3a03429fb9 100644 --- a/trunk/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf533/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2009 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -160,7 +160,7 @@ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5) -/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) @@ -278,12 +278,9 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) -#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) -#define ANOMALY_05000447 (0) -#define ANOMALY_05000448 (0) #endif diff --git a/trunk/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/trunk/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index 5f517f53b0fd..f3d9e495230c 100644 --- a/trunk/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/trunk/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART0_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif diff --git a/trunk/arch/blackfin/mach-bf537/boards/Kconfig b/trunk/arch/blackfin/mach-bf537/boards/Kconfig index 77c59da87e85..42a57b0acb29 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/Kconfig +++ b/trunk/arch/blackfin/mach-bf537/boards/Kconfig @@ -33,4 +33,9 @@ config CAMSIG_MINOTAUR help Board supply package for CSP Minotaur +config GENERIC_BF537_BOARD + bool "Generic" + help + Generic or Custom board support. + endchoice diff --git a/trunk/arch/blackfin/mach-bf537/boards/Makefile b/trunk/arch/blackfin/mach-bf537/boards/Makefile index 68b98a7af6a6..7168cc14afd8 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/Makefile +++ b/trunk/arch/blackfin/mach-bf537/boards/Makefile @@ -2,6 +2,7 @@ # arch/blackfin/mach-bf537/boards/Makefile # +obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o diff --git a/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c b/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c index 41c75b9bfac0..9cd8fb2a30d3 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -160,13 +160,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { - .modalias = "mmc_spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, - .controller_data = &mmc_spi_chip_info, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf537/boards/generic_board.c b/trunk/arch/blackfin/mach-bf537/boards/generic_board.c new file mode 100644 index 000000000000..da710fdc4569 --- /dev/null +++ b/trunk/arch/blackfin/mach-bf537/boards/generic_board.c @@ -0,0 +1,745 @@ +/* + * File: arch/blackfin/mach-bf537/boards/generic_board.c + * Based on: arch/blackfin/mach-bf533/boards/ezkit.c + * Author: Aidan Williams + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "UNKNOWN BOARD"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#include +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x203C0000, + .end = 0x203C0000 + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20311000, /* Attribute Memory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, { + .start = 6, /* Card Detect PF6 */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x203FB800 + 4, + .end = 0x203FB800 + 5, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +static struct resource sl811_hcd_resources[] = { + { + .start = 0x20340000, + .end = 0x20340000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20340004, + .end = 0x20340004, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) +void sl811_port_power(struct device *dev, int is_on) +{ + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); + +} +#endif + +static struct sl811_platform_data sl811_priv = { + .potpg = 10, + .power = 250, /* == 500mA */ +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) + .port_power = &sl811_port_power, +#endif +}; + +static struct platform_device sl811_hcd_device = { + .name = "sl811-hcd", + .id = 0, + .dev = { + .platform_data = &sl811_priv, + }, + .num_resources = ARRAY_SIZE(sl811_hcd_resources), + .resource = sl811_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20360000, + .end = 0x20360000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20360004, + .end = 0x20360004, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0xe0000, + .offset = 0x20000 + }, { + .name = "file system(spi)", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF6, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spi_ad7877_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +static struct platform_device bfin_fb_device = { + .name = "bf537-lq035", +}; +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; +#endif +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) + &sl811_hcd_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) + &bfin_fb_device, +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif +}; + +static int __init generic_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(generic_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); +} + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); +#endif diff --git a/trunk/arch/blackfin/mach-bf537/boards/minotaur.c b/trunk/arch/blackfin/mach-bf537/boards/minotaur.c index 3c159819e555..db7d3a385e4b 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/trunk/arch/blackfin/mach-bf537/boards/minotaur.c @@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -156,13 +156,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { - .modalias = "mmc_spi", + .modalias = "spi_mmc_dummy", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf537/boards/pnav10.c b/trunk/arch/blackfin/mach-bf537/boards/pnav10.c index 4e1de1e53f89..590eb3a139b7 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/trunk/arch/blackfin/mach-bf537/boards/pnav10.c @@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -364,13 +364,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, { - .modalias = "mmc_spi", + .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 53ad10f3cd76..3f4f203a06ec 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -160,13 +160,23 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, { - .modalias = "mmc_spi", + .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf537/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf537/include/mach/anomaly.h index 1bfd80c26c90..9cb39121d1cb 100644 --- a/trunk/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf537/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2009 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -110,7 +110,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 3) -/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) @@ -168,12 +168,9 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) -#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) -#define ANOMALY_05000447 (0) -#define ANOMALY_05000448 (0) #endif diff --git a/trunk/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/trunk/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index 9e34700844a2..b3f87e1d16a2 100644 --- a/trunk/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/trunk/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART0_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART1_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/trunk/arch/blackfin/mach-bf538/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf538/include/mach/anomaly.h index 3a5699827363..e130b4f8a05d 100644 --- a/trunk/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf538/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2009 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -120,17 +120,13 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000263 (0) -#define ANOMALY_05000305 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) -#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) -#define ANOMALY_05000447 (0) -#define ANOMALY_05000448 (0) #endif diff --git a/trunk/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/trunk/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index 3c2811ebecdd..40503b6b89a3 100644 --- a/trunk/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/trunk/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART0_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART1_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h index 882e40ccf0d1..23d03c52f4b4 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf548/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2009 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -91,6 +91,8 @@ #define ANOMALY_05000371 (__SILICON_REVISION__ < 2) /* USB DP/DM Data Pins May Lose State When Entering Hibernate */ #define ANOMALY_05000372 (__SILICON_REVISION__ < 1) +/* Mobile DDR Operation Not Functional */ +#define ANOMALY_05000377 (1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ #define ANOMALY_05000378 (__SILICON_REVISION__ < 2) /* 16-Bit NAND FLASH Boot Mode Is Not Functional */ @@ -155,22 +157,8 @@ #define ANOMALY_05000429 (__SILICON_REVISION__ < 2) /* Software System Reset Corrupts PLL_LOCKCNT Register */ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) -/* Incorrect Use of Stack in Lockbox Firmware During Authentication */ -#define ANOMALY_05000431 (__SILICON_REVISION__ < 3) -/* OTP Write Accesses Not Supported */ -#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */ -#define ANOMALY_05000446 (1) -/* UART IrDA Receiver Fails on Extended Bit Pulses */ -#define ANOMALY_05000447 (1) -/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */ -#define ANOMALY_05000448 (__SILICON_REVISION__ == 1) -/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ -#define ANOMALY_05000449 (__SILICON_REVISION__ == 1) -/* USB DMA Mode 1 Short Packet Data Corruption */ -#define ANOMALY_05000450 (1 /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -183,8 +171,6 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) -#define ANOMALY_05000278 (0) -#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/trunk/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index c05e79cba257..e4cf35e7ab9f 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -63,7 +63,7 @@ #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS) +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN @@ -74,12 +74,12 @@ # define CONFIG_UART0_RTS_PIN -1 # endif -# ifndef CONFIG_UART2_CTS_PIN -# define CONFIG_UART2_CTS_PIN -1 +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 # endif -# ifndef CONFIG_UART2_RTS_PIN -# define CONFIG_UART2_RTS_PIN -1 +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 # endif #endif @@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART0_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -143,10 +143,6 @@ struct bfin_serial_res bfin_serial_resource[] = { #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - 0, - 0, #endif }, #endif @@ -158,7 +154,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART2_TX, CH_UART2_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART2_CTSRTS CONFIG_UART2_CTS_PIN, CONFIG_UART2_RTS_PIN, #endif @@ -171,10 +167,6 @@ struct bfin_serial_res bfin_serial_resource[] = { #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART3_TX, CH_UART3_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - 0, - 0, #endif }, #endif diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/irq.h b/trunk/arch/blackfin/mach-bf548/include/mach/irq.h index f194625f6821..60299a71e090 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/irq.h @@ -123,8 +123,8 @@ Events (highest priority) EMU 0 #define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ #define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ #define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ -#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ -#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ +#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ +#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ #define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ #define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ #define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ @@ -361,8 +361,8 @@ Events (highest priority) EMU 0 #define IRQ_UART2_ERR IRQ_UART2_ERROR #define IRQ_CAN0_ERR IRQ_CAN0_ERROR #define IRQ_MXVR_ERR IRQ_MXVR_ERROR -#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR -#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR +#define IRQ_EPP1_ERR IRQ_EPP1_ERROR +#define IRQ_EPP2_ERR IRQ_EPP2_ERROR #define IRQ_UART3_ERR IRQ_UART3_ERROR #define IRQ_HOST_ERR IRQ_HOST_ERROR #define IRQ_PIXC_ERR IRQ_PIXC_ERROR diff --git a/trunk/arch/blackfin/mach-bf561/boards/Kconfig b/trunk/arch/blackfin/mach-bf561/boards/Kconfig index e4bc6d7c5a6a..e41a67b1fb53 100644 --- a/trunk/arch/blackfin/mach-bf561/boards/Kconfig +++ b/trunk/arch/blackfin/mach-bf561/boards/Kconfig @@ -19,4 +19,9 @@ config BFIN561_BLUETECHNIX_CM help CM-BF561 support for EVAL- and DEV-Board. +config GENERIC_BF561_BOARD + bool "Generic" + help + Generic or Custom board support. + endchoice diff --git a/trunk/arch/blackfin/mach-bf561/boards/Makefile b/trunk/arch/blackfin/mach-bf561/boards/Makefile index 3a152559e957..04add010b568 100644 --- a/trunk/arch/blackfin/mach-bf561/boards/Makefile +++ b/trunk/arch/blackfin/mach-bf561/boards/Makefile @@ -2,6 +2,7 @@ # arch/blackfin/mach-bf561/boards/Makefile # +obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c b/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c index f623c6b0719f..6880d1ebfe60 100644 --- a/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/trunk/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, .bits_per_word = 8, }; #endif @@ -155,13 +155,14 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { - .modalias = "mmc_spi", + .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/trunk/arch/blackfin/mach-bf561/boards/generic_board.c b/trunk/arch/blackfin/mach-bf561/boards/generic_board.c new file mode 100644 index 000000000000..0ba366a0e696 --- /dev/null +++ b/trunk/arch/blackfin/mach-bf561/boards/generic_board.c @@ -0,0 +1,113 @@ +/* + * File: arch/blackfin/mach-bf561/generic_board.c + * Based on: arch/blackfin/mach-bf533/ezkit.c + * Author: Aidan Williams + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +const char bfin_board_name[] = "UNKNOWN BOARD"; + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x2C010300, + .end = 0x2C010300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#endif + +static struct platform_device *generic_board_devices[] __initdata = { +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif +}; + +static int __init generic_board_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + return platform_add_devices(generic_board_devices, + ARRAY_SIZE(generic_board_devices)); +} + +arch_initcall(generic_board_init); diff --git a/trunk/arch/blackfin/mach-bf561/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf561/include/mach/anomaly.h index d0b0b3506440..1a9e17562821 100644 --- a/trunk/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf561/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2009 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -224,7 +224,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (1) -/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5) @@ -283,11 +283,8 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) -#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) -#define ANOMALY_05000447 (0) -#define ANOMALY_05000448 (0) #endif diff --git a/trunk/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/trunk/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index ca8c5f645209..043bfcf26c52 100644 --- a/trunk/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/trunk/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef CONFIG_BFIN_UART0_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif diff --git a/trunk/arch/blackfin/mach-common/arch_checks.c b/trunk/arch/blackfin/mach-common/arch_checks.c index 80d39b2f9db2..98133b968f7b 100644 --- a/trunk/arch/blackfin/mach-common/arch_checks.c +++ b/trunk/arch/blackfin/mach-common/arch_checks.c @@ -62,12 +62,3 @@ #if (CONFIG_BOOT_LOAD & 0x3) # error "The kernel load address must be 4 byte aligned" #endif - -/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */ -#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000 -# error "The kernel load address is too high; keep it below 10meg for safety" -#endif - -#if ANOMALY_05000448 -# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. -#endif diff --git a/trunk/arch/blackfin/mach-common/cache.S b/trunk/arch/blackfin/mach-common/cache.S index aa0648c6a9fe..3c98dacbf289 100644 --- a/trunk/arch/blackfin/mach-common/cache.S +++ b/trunk/arch/blackfin/mach-common/cache.S @@ -66,33 +66,11 @@ /* Invalidate all instruction cache lines assocoiated with this memory area */ ENTRY(_blackfin_icache_flush_range) -/* - * Walkaround to avoid loading wrong instruction after invalidating icache - * and following sequence is met. - * - * 1) One instruction address is cached in the instruction cache. - * 2) This instruction in SDRAM is changed. - * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). - * 4) This instruction is executed again, but the old one is loaded. - */ - P0 = R0; - IFLUSH[P0]; do_flush IFLUSH, , nop ENDPROC(_blackfin_icache_flush_range) /* Flush all cache lines assocoiated with this area of memory. */ ENTRY(_blackfin_icache_dcache_flush_range) -/* - * Walkaround to avoid loading wrong instruction after invalidating icache - * and following sequence is met. - * - * 1) One instruction address is cached in the instruction cache. - * 2) This instruction in SDRAM is changed. - * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). - * 4) This instruction is executed again, but the old one is loaded. - */ - P0 = R0; - IFLUSH[P0]; do_flush FLUSH, IFLUSH ENDPROC(_blackfin_icache_dcache_flush_range) diff --git a/trunk/arch/blackfin/mach-common/clocks-init.c b/trunk/arch/blackfin/mach-common/clocks-init.c index 35393651359b..9dddb6f8cc85 100644 --- a/trunk/arch/blackfin/mach-common/clocks-init.c +++ b/trunk/arch/blackfin/mach-common/clocks-init.c @@ -17,7 +17,7 @@ #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ - (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) + (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) __attribute__((l1_text)) static void do_sync(void) diff --git a/trunk/arch/blackfin/mach-common/dpmc_modes.S b/trunk/arch/blackfin/mach-common/dpmc_modes.S index 8009a512fb11..4da50bcd9300 100644 --- a/trunk/arch/blackfin/mach-common/dpmc_modes.S +++ b/trunk/arch/blackfin/mach-common/dpmc_modes.S @@ -376,22 +376,10 @@ ENTRY(_do_hibernate) #endif #ifdef PINT0_ASSIGN - PM_SYS_PUSH(PINT0_MASK_SET) - PM_SYS_PUSH(PINT1_MASK_SET) - PM_SYS_PUSH(PINT2_MASK_SET) - PM_SYS_PUSH(PINT3_MASK_SET) PM_SYS_PUSH(PINT0_ASSIGN) PM_SYS_PUSH(PINT1_ASSIGN) PM_SYS_PUSH(PINT2_ASSIGN) PM_SYS_PUSH(PINT3_ASSIGN) - PM_SYS_PUSH(PINT0_INVERT_SET) - PM_SYS_PUSH(PINT1_INVERT_SET) - PM_SYS_PUSH(PINT2_INVERT_SET) - PM_SYS_PUSH(PINT3_INVERT_SET) - PM_SYS_PUSH(PINT0_EDGE_SET) - PM_SYS_PUSH(PINT1_EDGE_SET) - PM_SYS_PUSH(PINT2_EDGE_SET) - PM_SYS_PUSH(PINT3_EDGE_SET) #endif PM_SYS_PUSH(EBIU_AMBCTL0) @@ -726,22 +714,10 @@ ENTRY(_do_hibernate) PM_SYS_POP(EBIU_AMBCTL0) #ifdef PINT0_ASSIGN - PM_SYS_POP(PINT3_EDGE_SET) - PM_SYS_POP(PINT2_EDGE_SET) - PM_SYS_POP(PINT1_EDGE_SET) - PM_SYS_POP(PINT0_EDGE_SET) - PM_SYS_POP(PINT3_INVERT_SET) - PM_SYS_POP(PINT2_INVERT_SET) - PM_SYS_POP(PINT1_INVERT_SET) - PM_SYS_POP(PINT0_INVERT_SET) PM_SYS_POP(PINT3_ASSIGN) PM_SYS_POP(PINT2_ASSIGN) PM_SYS_POP(PINT1_ASSIGN) PM_SYS_POP(PINT0_ASSIGN) - PM_SYS_POP(PINT3_MASK_SET) - PM_SYS_POP(PINT2_MASK_SET) - PM_SYS_POP(PINT1_MASK_SET) - PM_SYS_POP(PINT0_MASK_SET) #endif #ifdef SICA_IWR1 diff --git a/trunk/arch/blackfin/mach-common/entry.S b/trunk/arch/blackfin/mach-common/entry.S index 21e65a339a22..88de053bbe8e 100644 --- a/trunk/arch/blackfin/mach-common/entry.S +++ b/trunk/arch/blackfin/mach-common/entry.S @@ -600,19 +600,6 @@ ENTRY(_system_call) p2 = [p2]; [p2+(TASK_THREAD+THREAD_KSP)] = sp; -#ifdef CONFIG_IPIPE - r0 = sp; - SP += -12; - call ___ipipe_syscall_root; - SP += 12; - cc = r0 == 1; - if cc jump .Lsyscall_really_exit; - cc = r0 == -1; - if cc jump .Lresume_userspace; - r3 = [sp + PT_R3]; - r4 = [sp + PT_R4]; - p0 = [sp + PT_ORIG_P0]; -#endif /* CONFIG_IPIPE */ /* Check the System Call */ r7 = __NR_syscall; @@ -667,17 +654,6 @@ ENTRY(_system_call) r7 = r7 & r4; .Lsyscall_resched: -#ifdef CONFIG_IPIPE - cc = BITTST(r7, TIF_IRQ_SYNC); - if !cc jump .Lsyscall_no_irqsync; - [--sp] = reti; - r0 = [sp++]; - SP += -12; - call ___ipipe_sync_root; - SP += 12; - jump .Lresume_userspace_1; -.Lsyscall_no_irqsync: -#endif cc = BITTST(r7, TIF_NEED_RESCHED); if !cc jump .Lsyscall_sigpending; @@ -709,10 +685,6 @@ ENTRY(_system_call) .Lsyscall_really_exit: r5 = [sp + PT_RESERVED]; rets = r5; -#ifdef CONFIG_IPIPE - [--sp] = reti; - r5 = [sp++]; -#endif /* CONFIG_IPIPE */ rts; ENDPROC(_system_call) @@ -799,15 +771,6 @@ _new_old_task: ENDPROC(_resume) ENTRY(_ret_from_exception) -#ifdef CONFIG_IPIPE - [--sp] = rets; - SP += -12; - call ___ipipe_check_root - SP += 12 - rets = [sp++]; - cc = r0 == 0; - if cc jump 4f; /* not on behalf of Linux, get out */ -#endif /* CONFIG_IPIPE */ p2.l = lo(IPEND); p2.h = hi(IPEND); @@ -864,28 +827,6 @@ ENTRY(_ret_from_exception) rts; ENDPROC(_ret_from_exception) -#ifdef CONFIG_IPIPE - -_sync_root_irqs: - [--sp] = reti; /* Reenable interrupts */ - r0 = [sp++]; - jump.l ___ipipe_sync_root - -_resume_kernel_from_int: - r0.l = _sync_root_irqs - r0.h = _sync_root_irqs - [--sp] = rets; - [--sp] = ( r7:4, p5:3 ); - SP += -12; - call ___ipipe_call_irqtail - SP += 12; - ( r7:4, p5:3 ) = [sp++]; - rets = [sp++]; - rts -#else -#define _resume_kernel_from_int 2f -#endif - ENTRY(_return_from_int) /* If someone else already raised IRQ 15, do nothing. */ csync; @@ -907,7 +848,7 @@ ENTRY(_return_from_int) r1 = r0 - r1; r2 = r0 & r1; cc = r2 == 0; - if !cc jump _resume_kernel_from_int; + if !cc jump 2f; /* Lower the interrupt level to 15. */ p0.l = lo(EVT15); diff --git a/trunk/arch/blackfin/mach-common/interrupt.S b/trunk/arch/blackfin/mach-common/interrupt.S index 0069c2dd4625..43c4eb9acb65 100644 --- a/trunk/arch/blackfin/mach-common/interrupt.S +++ b/trunk/arch/blackfin/mach-common/interrupt.S @@ -235,7 +235,6 @@ ENDPROC(_evt_system_call) #ifdef CONFIG_IPIPE ENTRY(___ipipe_call_irqtail) - p0 = r0; r0.l = 1f; r0.h = 1f; reti = r0; @@ -243,6 +242,9 @@ ENTRY(___ipipe_call_irqtail) 1: [--sp] = rets; [--sp] = ( r7:4, p5:3 ); + p0.l = ___ipipe_irq_tail_hook; + p0.h = ___ipipe_irq_tail_hook; + p0 = [p0]; sp += -12; call (p0); sp += 12; @@ -257,7 +259,7 @@ ENTRY(___ipipe_call_irqtail) p0.h = hi(EVT14); [p0] = r0; csync; - r0 = 0x401f (z); + r0 = 0x401f; sti r0; raise 14; [--sp] = reti; /* IRQs on. */ @@ -275,7 +277,11 @@ ENTRY(___ipipe_call_irqtail) p0.h = _bfin_irq_flags; r0 = [p0]; sti r0; +#if 0 /* FIXME: this actually raises scheduling latencies */ + /* Reenable interrupts */ + [--sp] = reti; + r0 = [sp++]; +#endif rts; ENDPROC(___ipipe_call_irqtail) - #endif /* CONFIG_IPIPE */ diff --git a/trunk/arch/blackfin/mach-common/ints-priority.c b/trunk/arch/blackfin/mach-common/ints-priority.c index a7d7b2dd4059..202494568c6c 100644 --- a/trunk/arch/blackfin/mach-common/ints-priority.c +++ b/trunk/arch/blackfin/mach-common/ints-priority.c @@ -161,15 +161,11 @@ static void bfin_core_unmask_irq(unsigned int irq) static void bfin_internal_mask_irq(unsigned int irq) { - unsigned long flags; - #ifdef CONFIG_BF53x - local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & ~(1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & @@ -179,20 +175,15 @@ static void bfin_internal_mask_irq(unsigned int irq) ~(1 << mask_bit)); #endif #endif - local_irq_restore_hw(flags); } static void bfin_internal_unmask_irq(unsigned int irq) { - unsigned long flags; - #ifdef CONFIG_BF53x - local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | (1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | @@ -202,7 +193,6 @@ static void bfin_internal_unmask_irq(unsigned int irq) (1 << mask_bit)); #endif #endif - local_irq_restore_hw(flags); } #ifdef CONFIG_PM @@ -400,7 +390,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) { #ifdef CONFIG_IPIPE - _set_irq_handler(irq, handle_level_irq); + _set_irq_handler(irq, handle_edge_irq); #else struct irq_desc *desc = irq_desc + irq; /* May not call generic set_irq_handler() due to spinlock @@ -1065,18 +1055,13 @@ int __init init_arch_irq(void) #endif default: #ifdef CONFIG_IPIPE - /* - * We want internal interrupt sources to be - * masked, because ISRs may trigger interrupts - * recursively (e.g. DMA), but interrupts are - * _not_ masked at CPU level. So let's handle - * most of them as level interrupts, except - * the timer interrupt which is special. - */ - if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR) - set_irq_handler(irq, handle_simple_irq); - else - set_irq_handler(irq, handle_level_irq); + /* + * We want internal interrupt sources to be masked, because + * ISRs may trigger interrupts recursively (e.g. DMA), but + * interrupts are _not_ masked at CPU level. So let's handle + * them as level interrupts. + */ + set_irq_handler(irq, handle_level_irq); #else /* !CONFIG_IPIPE */ set_irq_handler(irq, handle_simple_irq); #endif /* !CONFIG_IPIPE */ @@ -1138,8 +1123,9 @@ int __init init_arch_irq(void) #ifdef CONFIG_IPIPE for (irq = 0; irq < NR_IRQS; irq++) { - struct irq_desc *desc = irq_to_desc(irq); + struct irq_desc *desc = irq_desc + irq; desc->ic_prio = __ipipe_get_irq_priority(irq); + desc->thr_prio = __ipipe_get_irqthread_priority(irq); } #endif /* CONFIG_IPIPE */ @@ -1222,21 +1208,76 @@ int __ipipe_get_irq_priority(unsigned irq) return IVG15; } +int __ipipe_get_irqthread_priority(unsigned irq) +{ + int ient, prio; + int demux_irq; + + /* The returned priority value is rescaled to [0..IVG13+1] + * with 0 being the lowest effective priority level. */ + + if (irq <= IRQ_CORETMR) + return IVG13 - irq + 1; + + /* GPIO IRQs are given the priority of the demux + * interrupt. */ + if (IS_GPIOIRQ(irq)) { +#if defined(CONFIG_BF54x) + u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]); + demux_irq = (bank == 0 ? IRQ_PINT0 : + bank == 1 ? IRQ_PINT1 : + bank == 2 ? IRQ_PINT2 : + IRQ_PINT3); +#elif defined(CONFIG_BF561) + demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA : + irq >= IRQ_PF16 ? IRQ_PROG1_INTA : + IRQ_PROG0_INTA); +#elif defined(CONFIG_BF52x) + demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA : + irq >= IRQ_PG0 ? IRQ_PORTG_INTA : + IRQ_PORTF_INTA); +#else + demux_irq = irq; +#endif + return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1; + } + + /* The GPIO demux interrupt is given a lower priority + * than the GPIO IRQs, so that its threaded handler + * unmasks the interrupt line after the decoded IRQs + * have been processed. */ + prio = PRIO_GPIODEMUX(irq); + /* demux irq? */ + if (prio != -1) + return IVG13 - prio; + + for (ient = 0; ient < NR_PERI_INTS; ient++) { + struct ivgx *ivg = ivg_table + ient; + if (ivg->irqno == irq) { + for (prio = 0; prio <= IVG13-IVG7; prio++) { + if (ivg7_13[prio].ifirst <= ivg && + ivg7_13[prio].istop > ivg) + return IVG7 - prio; + } + } + } + + return 0; +} + /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */ #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) #endif asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { - struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); - struct ipipe_domain *this_domain = ipipe_current_domain; struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; - int irq, s; + int irq; if (likely(vec == EVT_IVTMR_P)) { irq = IRQ_CORETMR; - goto core_tick; + goto handle_irq; } SSYNC(); @@ -1278,39 +1319,24 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) irq = ivg->irqno; if (irq == IRQ_SYSTMR) { -#ifdef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#else bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ -#endif /* This is basically what we need from the register frame. */ __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend; __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc; - if (this_domain != ipipe_root_domain) - __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10; - else + if (!ipipe_root_domain_p) __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; + else + __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10; } -#ifndef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#endif - if (this_domain == ipipe_root_domain) { - s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status); - barrier(); - } +handle_irq: ipipe_trace_irq_entry(irq); __ipipe_handle_irq(irq, regs); - ipipe_trace_irq_exit(irq); + ipipe_trace_irq_exit(irq); - if (this_domain == ipipe_root_domain) { - set_thread_flag(TIF_IRQ_SYNC); - if (!s) { - __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status); - return !test_bit(IPIPE_STALL_FLAG, &p->status); - } - } + if (ipipe_root_domain_p) + return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status)); return 0; } diff --git a/trunk/arch/blackfin/mach-common/smp.c b/trunk/arch/blackfin/mach-common/smp.c index 93eab6146079..77c992847094 100644 --- a/trunk/arch/blackfin/mach-common/smp.c +++ b/trunk/arch/blackfin/mach-common/smp.c @@ -158,14 +158,10 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance) kfree(msg); break; case BFIN_IPI_CALL_FUNC: - spin_unlock(&msg_queue->lock); ipi_call_function(cpu, msg); - spin_lock(&msg_queue->lock); break; case BFIN_IPI_CPU_STOP: - spin_unlock(&msg_queue->lock); ipi_cpu_stop(cpu); - spin_lock(&msg_queue->lock); kfree(msg); break; default: @@ -461,7 +457,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) smp_flush_data.start = start; smp_flush_data.end = end; - if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0)) + if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1)) printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n"); } EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); diff --git a/trunk/arch/blackfin/mm/init.c b/trunk/arch/blackfin/mm/init.c index 9c3629b9a689..d0532b72bba5 100644 --- a/trunk/arch/blackfin/mm/init.c +++ b/trunk/arch/blackfin/mm/init.c @@ -104,7 +104,7 @@ void __init paging_init(void) } } -asmlinkage void __init init_pda(void) +asmlinkage void init_pda(void) { unsigned int cpu = raw_smp_processor_id(); diff --git a/trunk/arch/h8300/include/asm/swab.h b/trunk/arch/h8300/include/asm/swab.h index 39abbf52807d..c108f39b8bc4 100644 --- a/trunk/arch/h8300/include/asm/swab.h +++ b/trunk/arch/h8300/include/asm/swab.h @@ -1,7 +1,7 @@ #ifndef _H8300_SWAB_H #define _H8300_SWAB_H -#include +#include #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) # define __SWAB_64_THRU_32__ diff --git a/trunk/arch/ia64/include/asm/fpu.h b/trunk/arch/ia64/include/asm/fpu.h index 0c26157cffa5..3859558ff0a4 100644 --- a/trunk/arch/ia64/include/asm/fpu.h +++ b/trunk/arch/ia64/include/asm/fpu.h @@ -6,6 +6,8 @@ * David Mosberger-Tang */ +#include + /* floating point status register: */ #define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */ #define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */ diff --git a/trunk/arch/ia64/include/asm/gcc_intrin.h b/trunk/arch/ia64/include/asm/gcc_intrin.h index c2c5fd8fcac4..0f5b55921758 100644 --- a/trunk/arch/ia64/include/asm/gcc_intrin.h +++ b/trunk/arch/ia64/include/asm/gcc_intrin.h @@ -6,7 +6,6 @@ * Copyright (C) 2002,2003 Suresh Siddha */ -#include #include /* define this macro to get some asm stmts included in 'c' files */ diff --git a/trunk/arch/ia64/include/asm/intrinsics.h b/trunk/arch/ia64/include/asm/intrinsics.h index c47830e26cb7..a3e44a5ed497 100644 --- a/trunk/arch/ia64/include/asm/intrinsics.h +++ b/trunk/arch/ia64/include/asm/intrinsics.h @@ -10,7 +10,6 @@ #ifndef __ASSEMBLY__ -#include /* include compiler specific intrinsics */ #include #ifdef __INTEL_COMPILER diff --git a/trunk/arch/ia64/include/asm/kvm.h b/trunk/arch/ia64/include/asm/kvm.h index 2b0a38e84705..bfa86b6af7cd 100644 --- a/trunk/arch/ia64/include/asm/kvm.h +++ b/trunk/arch/ia64/include/asm/kvm.h @@ -21,7 +21,8 @@ * */ -#include +#include + #include /* Select x86 specific features in */ diff --git a/trunk/arch/ia64/include/asm/percpu.h b/trunk/arch/ia64/include/asm/percpu.h index 30cf46534dd2..77f30b664b4e 100644 --- a/trunk/arch/ia64/include/asm/percpu.h +++ b/trunk/arch/ia64/include/asm/percpu.h @@ -27,12 +27,12 @@ extern void *per_cpu_init(void); #else /* ! SMP */ +#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu"))) + #define per_cpu_init() (__phys_per_cpu_start) #endif /* SMP */ -#define PER_CPU_BASE_SECTION ".data.percpu" - /* * Be extremely careful when taking the address of this variable! Due to virtual * remapping, it is different from the canonical address returned by __get_cpu_var(var)! diff --git a/trunk/arch/ia64/include/asm/swab.h b/trunk/arch/ia64/include/asm/swab.h index c89a8cb5d8a5..6aa58b699eea 100644 --- a/trunk/arch/ia64/include/asm/swab.h +++ b/trunk/arch/ia64/include/asm/swab.h @@ -6,7 +6,7 @@ * David Mosberger-Tang , Hewlett-Packard Co. */ -#include +#include #include #include diff --git a/trunk/arch/ia64/include/asm/topology.h b/trunk/arch/ia64/include/asm/topology.h index 3193f4417e16..32f3af1641c5 100644 --- a/trunk/arch/ia64/include/asm/topology.h +++ b/trunk/arch/ia64/include/asm/topology.h @@ -84,7 +84,7 @@ void build_cpu_to_node_map(void); .child = NULL, \ .groups = NULL, \ .min_interval = 8, \ - .max_interval = 8*(min(num_online_cpus(), 32U)), \ + .max_interval = 8*(min(num_online_cpus(), 32)), \ .busy_factor = 64, \ .imbalance_pct = 125, \ .cache_nice_tries = 2, \ diff --git a/trunk/arch/ia64/include/asm/uv/uv.h b/trunk/arch/ia64/include/asm/uv/uv.h deleted file mode 100644 index 61b5bdfd980e..000000000000 --- a/trunk/arch/ia64/include/asm/uv/uv.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_IA64_UV_UV_H -#define _ASM_IA64_UV_UV_H - -#include -#include - -static inline int is_uv_system(void) -{ - /* temporary support for running on hardware simulator */ - return IS_MEDUSA() || ia64_platform_is("uv"); -} - -#endif /* _ASM_IA64_UV_UV_H */ diff --git a/trunk/arch/ia64/kernel/acpi.c b/trunk/arch/ia64/kernel/acpi.c index bdef2ce38c8b..d541671caf4a 100644 --- a/trunk/arch/ia64/kernel/acpi.c +++ b/trunk/arch/ia64/kernel/acpi.c @@ -199,10 +199,6 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size) return __va(phys_addr); } -void __init __acpi_unmap_table(char *map, unsigned long size) -{ -} - /* -------------------------------------------------------------------------- Boot-time Table Parsing -------------------------------------------------------------------------- */ diff --git a/trunk/arch/ia64/kernel/iosapic.c b/trunk/arch/ia64/kernel/iosapic.c index 166e0d839fa0..e13125058bed 100644 --- a/trunk/arch/ia64/kernel/iosapic.c +++ b/trunk/arch/ia64/kernel/iosapic.c @@ -880,7 +880,7 @@ iosapic_unregister_intr (unsigned int gsi) if (iosapic_intr_info[irq].count == 0) { #ifdef CONFIG_SMP /* Clear affinity */ - cpumask_setall(idesc->affinity); + cpus_setall(idesc->affinity); #endif /* Clear the interrupt information */ iosapic_intr_info[irq].dest = 0; diff --git a/trunk/arch/ia64/kernel/irq.c b/trunk/arch/ia64/kernel/irq.c index 226233a6fa19..a58f64ca9f0e 100644 --- a/trunk/arch/ia64/kernel/irq.c +++ b/trunk/arch/ia64/kernel/irq.c @@ -103,7 +103,7 @@ static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 }; void set_irq_affinity_info (unsigned int irq, int hwid, int redir) { if (irq < NR_IRQS) { - cpumask_copy(irq_desc[irq].affinity, + cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu_logical_id(hwid))); irq_redir[irq] = (char) (redir & 0xff); } @@ -148,7 +148,7 @@ static void migrate_irqs(void) if (desc->status == IRQ_PER_CPU) continue; - if (cpumask_any_and(irq_desc[irq].affinity, cpu_online_mask) + if (cpumask_any_and(&irq_desc[irq].affinity, cpu_online_mask) >= nr_cpu_ids) { /* * Save it for phase 2 processing diff --git a/trunk/arch/ia64/kernel/irq_ia64.c b/trunk/arch/ia64/kernel/irq_ia64.c index 927ad027820c..28d3d483db92 100644 --- a/trunk/arch/ia64/kernel/irq_ia64.c +++ b/trunk/arch/ia64/kernel/irq_ia64.c @@ -493,13 +493,11 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs) saved_tpr = ia64_getreg(_IA64_REG_CR_TPR); ia64_srlz_d(); while (vector != IA64_SPURIOUS_INT_VECTOR) { - struct irq_desc *desc = irq_to_desc(vector); - if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) { smp_local_flush_tlb(); - kstat_incr_irqs_this_cpu(vector, desc); + kstat_this_cpu.irqs[vector]++; } else if (unlikely(IS_RESCHEDULE(vector))) - kstat_incr_irqs_this_cpu(vector, desc); + kstat_this_cpu.irqs[vector]++; else { int irq = local_vector_to_irq(vector); @@ -553,13 +551,11 @@ void ia64_process_pending_intr(void) * Perform normal interrupt style processing */ while (vector != IA64_SPURIOUS_INT_VECTOR) { - struct irq_desc *desc = irq_to_desc(vector); - if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) { smp_local_flush_tlb(); - kstat_incr_irqs_this_cpu(vector, desc); + kstat_this_cpu.irqs[vector]++; } else if (unlikely(IS_RESCHEDULE(vector))) - kstat_incr_irqs_this_cpu(vector, desc); + kstat_this_cpu.irqs[vector]++; else { struct pt_regs *old_regs = set_irq_regs(NULL); int irq = local_vector_to_irq(vector); diff --git a/trunk/arch/ia64/kernel/msi_ia64.c b/trunk/arch/ia64/kernel/msi_ia64.c index dcb6b7c51ea7..890339339035 100644 --- a/trunk/arch/ia64/kernel/msi_ia64.c +++ b/trunk/arch/ia64/kernel/msi_ia64.c @@ -75,7 +75,7 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, msg.data = data; write_msi_msg(irq, &msg); - cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + irq_desc[irq].affinity = cpumask_of_cpu(cpu); } #endif /* CONFIG_SMP */ @@ -187,7 +187,7 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu)); dmar_msi_write(irq, &msg); - cpumask_copy(irq_desc[irq].affinity, mask); + irq_desc[irq].affinity = *mask; } #endif /* CONFIG_SMP */ diff --git a/trunk/arch/ia64/kernel/vmlinux.lds.S b/trunk/arch/ia64/kernel/vmlinux.lds.S index f45e4e508eca..10a7d47e8510 100644 --- a/trunk/arch/ia64/kernel/vmlinux.lds.S +++ b/trunk/arch/ia64/kernel/vmlinux.lds.S @@ -219,7 +219,6 @@ SECTIONS .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET) { __per_cpu_start = .; - *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; diff --git a/trunk/arch/ia64/sn/kernel/msi_sn.c b/trunk/arch/ia64/sn/kernel/msi_sn.c index 81e428943d73..ca553b0429ce 100644 --- a/trunk/arch/ia64/sn/kernel/msi_sn.c +++ b/trunk/arch/ia64/sn/kernel/msi_sn.c @@ -205,7 +205,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq, msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff); write_msi_msg(irq, &msg); - cpumask_copy(irq_desc[irq].affinity, cpu_mask); + irq_desc[irq].affinity = *cpu_mask; } #endif /* CONFIG_SMP */ diff --git a/trunk/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/trunk/arch/ia64/sn/pci/pcibr/pcibr_dma.c index 060df4aa9916..e626e50a938a 100644 --- a/trunk/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/trunk/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -135,10 +135,11 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr, if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS) pci_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) : - PHYS_TO_TIODMA(paddr); + PHYS_TO_TIODMA(paddr) | dma_attributes; else - pci_addr = paddr; - pci_addr |= dma_attributes; + pci_addr = IS_PIC_SOFT(pcibus_info) ? + paddr : + paddr | dma_attributes; /* Handle Bus mode */ if (IS_PCIX(pcibus_info)) diff --git a/trunk/arch/m68knommu/platform/5206e/config.c b/trunk/arch/m68knommu/platform/5206e/config.c index db902540bf2c..d01a5d2b7557 100644 --- a/trunk/arch/m68knommu/platform/5206e/config.c +++ b/trunk/arch/m68knommu/platform/5206e/config.c @@ -17,7 +17,6 @@ #include #include #include -#include /***************************************************************************/ diff --git a/trunk/arch/m68knommu/platform/528x/config.c b/trunk/arch/m68knommu/platform/528x/config.c index 44baeb225dc7..dfdb5c2ed8e6 100644 --- a/trunk/arch/m68knommu/platform/528x/config.c +++ b/trunk/arch/m68knommu/platform/528x/config.c @@ -24,6 +24,7 @@ #include #include #include +#include #ifdef CONFIG_MTD_PARTITIONS #include @@ -32,6 +33,233 @@ /***************************************************************************/ void coldfire_reset(void); +static void coldfire_qspi_cs_control(u8 cs, u8 command); + +/***************************************************************************/ + +#if defined(CONFIG_SPI) + +#if defined(CONFIG_WILDFIRE) +#define SPI_NUM_CHIPSELECTS 0x02 +#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */ +#define SPI_CS_MASK 0x18 + +#define FLASH_BLOCKSIZE (1024*64) +#define FLASH_NUMBLOCKS 16 +#define FLASH_TYPE "m25p80" + +#define M25P80_CS 0 +#define MMC_CS 1 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition stm25p_partitions[] = { + /* sflash */ + [0] = { + .name = "stm25p80", + .offset = 0x00000000, + .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS, + .mask_flags = 0 + } +}; + +#endif + +#elif defined(CONFIG_WILDFIREMOD) + +#define SPI_NUM_CHIPSELECTS 0x08 +#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */ +#define SPI_CS_MASK 0x78 + +#define FLASH_BLOCKSIZE (1024*64) +#define FLASH_NUMBLOCKS 64 +#define FLASH_TYPE "m25p32" +/* Reserve 1M for the kernel parition */ +#define FLASH_KERNEL_SIZE (1024 * 1024) + +#define M25P80_CS 5 +#define MMC_CS 6 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition stm25p_partitions[] = { + /* sflash */ + [0] = { + .name = "kernel", + .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE, + .size = FLASH_KERNEL_SIZE, + .mask_flags = 0 + }, + [1] = { + .name = "image", + .offset = 0x00000000, + .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE, + .mask_flags = 0 + }, + [2] = { + .name = "all", + .offset = 0x00000000, + .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS, + .mask_flags = 0 + } +}; +#endif + +#else +#define SPI_NUM_CHIPSELECTS 0x04 +#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */ +#endif + +#ifdef MMC_CS +static struct coldfire_spi_chip flash_chip_info = { + .mode = SPI_MODE_0, + .bits_per_word = 16, + .del_cs_to_clk = 17, + .del_after_trans = 1, + .void_write_data = 0 +}; + +static struct coldfire_spi_chip mmc_chip_info = { + .mode = SPI_MODE_0, + .bits_per_word = 16, + .del_cs_to_clk = 17, + .del_after_trans = 1, + .void_write_data = 0xFFFF +}; +#endif + +#ifdef M25P80_CS +static struct flash_platform_data stm25p80_platform_data = { + .name = "ST M25P80 SPI Flash chip", +#ifdef CONFIG_MTD_PARTITIONS + .parts = stm25p_partitions, + .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions), +#endif + .type = FLASH_TYPE +}; +#endif + +static struct spi_board_info spi_board_info[] __initdata = { +#ifdef M25P80_CS + { + .modalias = "m25p80", + .max_speed_hz = 16000000, + .bus_num = 1, + .chip_select = M25P80_CS, + .platform_data = &stm25p80_platform_data, + .controller_data = &flash_chip_info + }, +#endif +#ifdef MMC_CS + { + .modalias = "mmc_spi", + .max_speed_hz = 16000000, + .bus_num = 1, + .chip_select = MMC_CS, + .controller_data = &mmc_chip_info + } +#endif +}; + +static struct coldfire_spi_master coldfire_master_info = { + .bus_num = 1, + .num_chipselect = SPI_NUM_CHIPSELECTS, + .irq_source = MCF5282_QSPI_IRQ_SOURCE, + .irq_vector = MCF5282_QSPI_IRQ_VECTOR, + .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01), + .irq_lp = 0x2B, /* Level 5 and Priority 3 */ + .par_val = SPI_PAR_VAL, + .cs_control = coldfire_qspi_cs_control, +}; + +static struct resource coldfire_spi_resources[] = { + [0] = { + .name = "qspi-par", + .start = MCF5282_QSPI_PAR, + .end = MCF5282_QSPI_PAR, + .flags = IORESOURCE_MEM + }, + + [1] = { + .name = "qspi-module", + .start = MCF5282_QSPI_QMR, + .end = MCF5282_QSPI_QMR + 0x18, + .flags = IORESOURCE_MEM + }, + + [2] = { + .name = "qspi-int-level", + .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE, + .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE, + .flags = IORESOURCE_MEM + }, + + [3] = { + .name = "qspi-int-mask", + .start = MCF5282_INTC0 + MCFINTC_IMRL, + .end = MCF5282_INTC0 + MCFINTC_IMRL, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device coldfire_spi = { + .name = "spi_coldfire", + .id = -1, + .resource = coldfire_spi_resources, + .num_resources = ARRAY_SIZE(coldfire_spi_resources), + .dev = { + .platform_data = &coldfire_master_info, + } +}; + +static void coldfire_qspi_cs_control(u8 cs, u8 command) +{ + u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK; + +#if defined(CONFIG_WILDFIRE) + u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK); +#endif +#if defined(CONFIG_WILDFIREMOD) + u8 cs_mask = (cs << 3) & SPI_CS_MASK; +#endif + + /* + * Don't do anything if the chip select is not + * one of the port qs pins. + */ + if (command & QSPI_CS_INIT) { +#if defined(CONFIG_WILDFIRE) + MCF5282_GPIO_DDRQS |= cs_bit; + MCF5282_GPIO_PQSPAR &= ~cs_bit; +#endif + +#if defined(CONFIG_WILDFIREMOD) + MCF5282_GPIO_DDRQS |= SPI_CS_MASK; + MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK; +#endif + } + + if (command & QSPI_CS_ASSERT) { + MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK; + MCF5282_GPIO_PORTQS |= cs_mask; + } else if (command & QSPI_CS_DROP) { + MCF5282_GPIO_PORTQS |= SPI_CS_MASK; + } +} + +static int __init spi_dev_init(void) +{ + int retval; + + retval = platform_device_register(&coldfire_spi); + if (retval < 0) + return retval; + + if (ARRAY_SIZE(spi_board_info)) + retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + return retval; +} + +#endif /* CONFIG_SPI */ /***************************************************************************/ diff --git a/trunk/arch/mips/configs/ip27_defconfig b/trunk/arch/mips/configs/ip27_defconfig index 0208723adf28..f2baea3039bb 100644 --- a/trunk/arch/mips/configs/ip27_defconfig +++ b/trunk/arch/mips/configs/ip27_defconfig @@ -512,7 +512,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=y +CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m diff --git a/trunk/arch/mips/configs/jmr3927_defconfig b/trunk/arch/mips/configs/jmr3927_defconfig index 5380f1f582d9..9d5bd2a0af3d 100644 --- a/trunk/arch/mips/configs/jmr3927_defconfig +++ b/trunk/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Wed Mar 4 23:07:16 2009 +# Linux kernel version: 2.6.26-rc9 +# Fri Jul 11 23:01:36 2008 # CONFIG_MIPS=y @@ -18,10 +18,8 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MACH_EMMA is not set +# CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -41,11 +39,7 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set CONFIG_MACH_TX39XX=y # CONFIG_MACH_TX49XX is not set -# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_JMR3927=y CONFIG_SOC_TX3927=y # CONFIG_TOSHIBA_FPCIB0 is not set @@ -60,14 +54,12 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_CEVT_TXX9=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y -CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -95,7 +87,6 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -103,7 +94,6 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX39XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -127,12 +117,14 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_PHYS_ADDR_T_64BIT is not set +# CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -167,15 +159,6 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -188,6 +171,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -204,23 +188,26 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -234,7 +221,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -244,15 +231,12 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y -# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -261,12 +245,15 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set + +# +# Networking +# CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -306,7 +293,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set # # Network testing @@ -316,9 +302,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set -# CONFIG_WIMAX is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # @@ -332,89 +323,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set +# CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -427,7 +336,6 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -453,6 +361,7 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -474,9 +383,6 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -486,7 +392,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -494,9 +399,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -504,6 +406,7 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y +# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -512,11 +415,9 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set -# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -527,10 +428,6 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -543,7 +440,27 @@ CONFIG_TC35815=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports @@ -600,22 +517,16 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y +CONFIG_HAVE_GPIO_LIB=y # -# Memory mapped GPIO expanders: +# GPIO Support # # # I2C GPIO expanders: # -# -# PCI GPIO expanders: -# -# CONFIG_GPIO_BT8XX is not set - # # SPI GPIO expanders: # @@ -631,7 +542,6 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=y # @@ -639,21 +549,18 @@ CONFIG_TXX9_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # -# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_REGULATOR is not set # # Multimedia devices @@ -684,26 +591,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# # CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_GPIO=y - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_TIMER is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -729,34 +626,27 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set -# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -786,17 +676,28 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set -CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y @@ -825,16 +726,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -842,18 +734,15 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/trunk/arch/mips/configs/rbtx49xx_defconfig b/trunk/arch/mips/configs/rbtx49xx_defconfig index 1efe977497dd..83d5c58662c8 100644 --- a/trunk/arch/mips/configs/rbtx49xx_defconfig +++ b/trunk/arch/mips/configs/rbtx49xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Wed Mar 4 23:08:06 2009 +# Linux kernel version: 2.6.26-rc9 +# Fri Jul 11 23:03:21 2008 # CONFIG_MIPS=y @@ -18,10 +18,8 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MACH_EMMA is not set +# CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -41,28 +39,20 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set # CONFIG_MACH_TX39XX is not set CONFIG_MACH_TX49XX=y -# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_RBTX4927=y CONFIG_TOSHIBA_RBTX4938=y -CONFIG_TOSHIBA_RBTX4939=y CONFIG_SOC_TX4927=y CONFIG_SOC_TX4938=y -CONFIG_SOC_TX4939=y -CONFIG_TXX9_7SEGLED=y # CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y # # Multiplex Pin Select # -# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set +CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set -CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -74,18 +64,14 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y CONFIG_CEVT_TXX9=y -CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y -CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -114,7 +100,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_TX49XX=y # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -122,7 +107,6 @@ CONFIG_CPU_TX49XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX49XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y @@ -150,12 +134,13 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_PHYS_ADDR_T_64BIT is not set +# CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -191,15 +176,6 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -214,6 +190,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -230,26 +207,30 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y +# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -263,8 +244,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_PROBE_INITRD_HEADER is not set -# CONFIG_FREEZER is not set +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -274,15 +254,12 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -291,12 +268,15 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set + +# +# Networking +# CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -338,7 +318,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set # # Network testing @@ -348,9 +327,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set -# CONFIG_WIMAX is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # @@ -364,90 +348,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set +# CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -464,60 +365,9 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_TIMINGS=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -# CONFIG_IDE_GD_ATAPI is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_BLK_DEV_PLATFORM is not set -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT8172 is not set -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDE_TX4938=y -CONFIG_BLK_DEV_IDE_TX4939=y -CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDE is not set # # SCSI device support @@ -540,6 +390,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -561,19 +412,15 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -CONFIG_SMC91X=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -582,9 +429,6 @@ CONFIG_NE2000=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -592,6 +436,7 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y +# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -600,11 +445,9 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set -# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -615,10 +458,6 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -663,7 +502,6 @@ CONFIG_SERIAL_TXX9_CONSOLE=y CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -679,34 +517,26 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_GPIO is not set CONFIG_SPI_TXX9=y # # SPI Protocol Masters # +CONFIG_EEPROM_AT25=y # CONFIG_SPI_TLE62X0 is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y +CONFIG_HAVE_GPIO_LIB=y # -# Memory mapped GPIO expanders: +# GPIO Support # # # I2C GPIO expanders: # -# -# PCI GPIO expanders: -# -# CONFIG_GPIO_BT8XX is not set - # # SPI GPIO expanders: # -# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set @@ -720,7 +550,6 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=m # @@ -728,21 +557,18 @@ CONFIG_TXX9_WDT=m # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # -# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_REGULATOR is not set # # Multimedia devices @@ -773,27 +599,15 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_GPIO=y - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_TIMER is not set -CONFIG_LEDS_TRIGGER_IDE_DISK=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -814,47 +628,35 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # # SPI RTC drivers # -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set CONFIG_RTC_DRV_RS5C348=y -# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -CONFIG_RTC_DRV_TX4939=y -# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set -# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -885,19 +687,30 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -927,16 +740,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -944,18 +748,15 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/trunk/arch/mips/include/asm/compat.h b/trunk/arch/mips/include/asm/compat.h index 6c5b40905dd6..ac5d541368e9 100644 --- a/trunk/arch/mips/include/asm/compat.h +++ b/trunk/arch/mips/include/asm/compat.h @@ -3,8 +3,6 @@ /* * Architecture specific compatibility types */ -#include -#include #include #include #include @@ -220,9 +218,4 @@ struct compat_shmid64_ds { compat_ulong_t __unused2; }; -static inline int is_compat_task(void) -{ - return test_thread_flag(TIF_32BIT); -} - #endif /* _ASM_COMPAT_H */ diff --git a/trunk/arch/mips/include/asm/hazards.h b/trunk/arch/mips/include/asm/hazards.h index 134e1fc8f4d6..43baed16a109 100644 --- a/trunk/arch/mips/include/asm/hazards.h +++ b/trunk/arch/mips/include/asm/hazards.h @@ -138,8 +138,7 @@ do { \ __instruction_hazard(); \ } while (0) -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_R5500) +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/trunk/arch/mips/include/asm/irq.h b/trunk/arch/mips/include/asm/irq.h index 3214ade02d10..abc62aa744ac 100644 --- a/trunk/arch/mips/include/asm/irq.h +++ b/trunk/arch/mips/include/asm/irq.h @@ -66,7 +66,7 @@ extern void smtc_forward_irq(unsigned int irq); */ #define IRQ_AFFINITY_HOOK(irq) \ do { \ - if (!cpumask_test_cpu(smp_processor_id(), irq_desc[irq].affinity)) {\ + if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) { \ smtc_forward_irq(irq); \ irq_exit(); \ return; \ diff --git a/trunk/arch/mips/include/asm/prefetch.h b/trunk/arch/mips/include/asm/prefetch.h index a56594f360ee..17850834ccb0 100644 --- a/trunk/arch/mips/include/asm/prefetch.h +++ b/trunk/arch/mips/include/asm/prefetch.h @@ -26,7 +26,7 @@ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in * current versions due to erratum G105. * - * VR5500 (including VR5701 and VR7701) only implement load prefetch. + * VR7701 only implements the Load prefetch. * * Finally MIPS32 and MIPS64 implement all of the following hints. */ diff --git a/trunk/arch/mips/include/asm/sigcontext.h b/trunk/arch/mips/include/asm/sigcontext.h index 9e89cf99d4e4..9ce0607d7a4e 100644 --- a/trunk/arch/mips/include/asm/sigcontext.h +++ b/trunk/arch/mips/include/asm/sigcontext.h @@ -9,7 +9,6 @@ #ifndef _ASM_SIGCONTEXT_H #define _ASM_SIGCONTEXT_H -#include #include #if _MIPS_SIM == _MIPS_SIM_ABI32 diff --git a/trunk/arch/mips/include/asm/swab.h b/trunk/arch/mips/include/asm/swab.h index 99993c0d6c12..88f1f7d555cb 100644 --- a/trunk/arch/mips/include/asm/swab.h +++ b/trunk/arch/mips/include/asm/swab.h @@ -9,7 +9,7 @@ #define _ASM_SWAB_H #include -#include +#include #define __SWAB_64_THRU_32__ diff --git a/trunk/arch/mips/kernel/cpu-probe.c b/trunk/arch/mips/kernel/cpu-probe.c index 1bdbcad3bb74..a7162a4484cf 100644 --- a/trunk/arch/mips/kernel/cpu-probe.c +++ b/trunk/arch/mips/kernel/cpu-probe.c @@ -149,7 +149,6 @@ void __init check_wait(void) case CPU_R4650: case CPU_R4700: case CPU_R5000: - case CPU_R5500: case CPU_NEVADA: case CPU_4KC: case CPU_4KEC: diff --git a/trunk/arch/mips/kernel/irq-gic.c b/trunk/arch/mips/kernel/irq-gic.c index 87deb8f6c458..494a49a317e9 100644 --- a/trunk/arch/mips/kernel/irq-gic.c +++ b/trunk/arch/mips/kernel/irq-gic.c @@ -187,7 +187,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask); } - cpumask_copy(irq_desc[irq].affinity, cpumask); + irq_desc[irq].affinity = *cpumask; spin_unlock_irqrestore(&gic_lock, flags); } diff --git a/trunk/arch/mips/kernel/linux32.c b/trunk/arch/mips/kernel/linux32.c index 1a86f84fa947..2f8452b404c7 100644 --- a/trunk/arch/mips/kernel/linux32.c +++ b/trunk/arch/mips/kernel/linux32.c @@ -235,7 +235,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, #else SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third, - u32, ptr, u32, fifth) + u32, ptr, u32 fifth) { return -ENOSYS; } diff --git a/trunk/arch/mips/kernel/smtc.c b/trunk/arch/mips/kernel/smtc.c index 5f5af7d4c890..b6cca01ff82b 100644 --- a/trunk/arch/mips/kernel/smtc.c +++ b/trunk/arch/mips/kernel/smtc.c @@ -686,7 +686,7 @@ void smtc_forward_irq(unsigned int irq) * and efficiency, we just pick the easiest one to find. */ - target = cpumask_first(irq_desc[irq].affinity); + target = first_cpu(irq_desc[irq].affinity); /* * We depend on the platform code to have correctly processed @@ -921,13 +921,11 @@ void ipi_decode(struct smtc_ipi *pipi) struct clock_event_device *cd; void *arg_copy = pipi->arg; int type_copy = pipi->type; - int irq = MIPS_CPU_IRQ_BASE + 1; - smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++; cd = &per_cpu(mips_clockevent_device, cpu); cd->event_handler(cd); irq_exit(); diff --git a/trunk/arch/mips/mm/page.c b/trunk/arch/mips/mm/page.c index 48060c635acd..1417c6494858 100644 --- a/trunk/arch/mips/mm/page.c +++ b/trunk/arch/mips/mm/page.c @@ -172,9 +172,8 @@ static void __cpuinit set_prefetch_parameters(void) */ cache_line_size = cpu_dcache_line_size(); switch (current_cpu_type()) { - case CPU_R5500: case CPU_TX49XX: - /* These processors only support the Pref_Load. */ + /* TX49 supports only Pref_Load */ pref_bias_copy_load = 256; break; diff --git a/trunk/arch/mips/mm/tlbex.c b/trunk/arch/mips/mm/tlbex.c index f335cf6cdd78..42942038d0fd 100644 --- a/trunk/arch/mips/mm/tlbex.c +++ b/trunk/arch/mips/mm/tlbex.c @@ -318,7 +318,6 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BCM4710: case CPU_LOONGSON2: case CPU_CAVIUM_OCTEON: - case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); tlbw(p); diff --git a/trunk/arch/mips/mti-malta/malta-smtc.c b/trunk/arch/mips/mti-malta/malta-smtc.c index 5ba31888fefb..aabd7274507b 100644 --- a/trunk/arch/mips/mti-malta/malta-smtc.c +++ b/trunk/arch/mips/mti-malta/malta-smtc.c @@ -116,7 +116,7 @@ struct plat_smp_ops msmtc_smp_ops = { void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) { - cpumask_t tmask; + cpumask_t tmask = *affinity; int cpu = 0; void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff); @@ -139,12 +139,11 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) * be made to forward to an offline "CPU". */ - cpumask_copy(&tmask, affinity); for_each_cpu(cpu, affinity) { if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu)) cpu_clear(cpu, tmask); } - cpumask_copy(irq_desc[irq].affinity, &tmask); + irq_desc[irq].affinity = tmask; if (cpus_empty(tmask)) /* diff --git a/trunk/arch/mips/sgi-ip22/ip22-int.c b/trunk/arch/mips/sgi-ip22/ip22-int.c index 0ecd5fe9486e..f8b18af141a1 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-int.c +++ b/trunk/arch/mips/sgi-ip22/ip22-int.c @@ -155,7 +155,7 @@ static void indy_buserror_irq(void) int irq = SGI_BUSERR_IRQ; irq_enter(); - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + kstat_this_cpu.irqs[irq]++; ip22_be_interrupt(irq); irq_exit(); } diff --git a/trunk/arch/mips/sgi-ip22/ip22-time.c b/trunk/arch/mips/sgi-ip22/ip22-time.c index c8f7d2328b24..3dcb27ec0c53 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-time.c +++ b/trunk/arch/mips/sgi-ip22/ip22-time.c @@ -122,7 +122,7 @@ void indy_8254timer_irq(void) char c; irq_enter(); - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + kstat_this_cpu.irqs[irq]++; printk(KERN_ALERT "Oops, got 8254 interrupt.\n"); ArcRead(0, &c, 1, &cnt); ArcEnterInteractiveMode(); diff --git a/trunk/arch/mips/sibyte/bcm1480/smp.c b/trunk/arch/mips/sibyte/bcm1480/smp.c index 314691648c97..dddfda8e8294 100644 --- a/trunk/arch/mips/sibyte/bcm1480/smp.c +++ b/trunk/arch/mips/sibyte/bcm1480/smp.c @@ -178,10 +178,9 @@ struct plat_smp_ops bcm1480_smp_ops = { void bcm1480_mailbox_interrupt(void) { int cpu = smp_processor_id(); - int irq = K_BCM1480_INT_MBOX_0_0; unsigned int action; - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++; /* Load the mailbox register to figure out what we're supposed to do */ action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff; diff --git a/trunk/arch/mips/sibyte/sb1250/smp.c b/trunk/arch/mips/sibyte/sb1250/smp.c index cad14003b84f..5950a288a7da 100644 --- a/trunk/arch/mips/sibyte/sb1250/smp.c +++ b/trunk/arch/mips/sibyte/sb1250/smp.c @@ -166,10 +166,9 @@ struct plat_smp_ops sb_smp_ops = { void sb1250_mailbox_interrupt(void) { int cpu = smp_processor_id(); - int irq = K_INT_MBOX_0; unsigned int action; - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + kstat_this_cpu.irqs[K_INT_MBOX_0]++; /* Load the mailbox register to figure out what we're supposed to do */ action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff; diff --git a/trunk/arch/mn10300/kernel/mn10300-watchdog.c b/trunk/arch/mn10300/kernel/mn10300-watchdog.c index 2e370d88a87a..10811e981d20 100644 --- a/trunk/arch/mn10300/kernel/mn10300-watchdog.c +++ b/trunk/arch/mn10300/kernel/mn10300-watchdog.c @@ -130,7 +130,6 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) * the stack NMI-atomically, it's safe to use smp_processor_id(). */ int sum, cpu = smp_processor_id(); - int irq = NMIIRQ; u8 wdt, tmp; wdt = WDCTR & ~WDCTR_WDCNE; @@ -139,7 +138,7 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) NMICR = NMICR_WDIF; nmi_count(cpu)++; - kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); + kstat_this_cpu.irqs[NMIIRQ]++; sum = irq_stat[cpu].__irq_count; if (last_irq_sums[cpu] == sum) { diff --git a/trunk/arch/parisc/include/asm/pdc.h b/trunk/arch/parisc/include/asm/pdc.h index 430f1aeea0b8..c584b00c6074 100644 --- a/trunk/arch/parisc/include/asm/pdc.h +++ b/trunk/arch/parisc/include/asm/pdc.h @@ -336,11 +336,10 @@ #define NUM_PDC_RESULT 32 #if !defined(__ASSEMBLY__) +#ifdef __KERNEL__ #include -#ifdef __KERNEL__ - extern int pdc_type; /* Values for pdc_type */ diff --git a/trunk/arch/parisc/include/asm/swab.h b/trunk/arch/parisc/include/asm/swab.h index e78403b129ef..3ff16c5a3358 100644 --- a/trunk/arch/parisc/include/asm/swab.h +++ b/trunk/arch/parisc/include/asm/swab.h @@ -1,7 +1,7 @@ #ifndef _PARISC_SWAB_H #define _PARISC_SWAB_H -#include +#include #include #define __SWAB_64_THRU_32__ diff --git a/trunk/arch/parisc/kernel/irq.c b/trunk/arch/parisc/kernel/irq.c index 49482806863f..ac2c822928c7 100644 --- a/trunk/arch/parisc/kernel/irq.c +++ b/trunk/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - cpumask_setall(irq_desc[irq].affinity); + irq_desc[irq].affinity = CPU_MASK_ALL; return -EINVAL; } @@ -136,7 +136,7 @@ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_check_affinity(irq, dest)) return; - cpumask_copy(irq_desc[irq].affinity, dest); + irq_desc[irq].affinity = *dest; } #endif @@ -295,7 +295,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + irq_desc[irq].affinity = cpumask_of_cpu(cpu); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -352,7 +352,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - cpumask_copy(&dest, irq_desc[irq].affinity); + dest = irq_desc[irq].affinity; if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); diff --git a/trunk/arch/powerpc/configs/40x/virtex_defconfig b/trunk/arch/powerpc/configs/40x/virtex_defconfig index f5698f962e58..b6888384dd74 100644 --- a/trunk/arch/powerpc/configs/40x/virtex_defconfig +++ b/trunk/arch/powerpc/configs/40x/virtex_defconfig @@ -686,7 +686,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set diff --git a/trunk/arch/powerpc/configs/44x/virtex5_defconfig b/trunk/arch/powerpc/configs/44x/virtex5_defconfig index 1bf0a63614b1..15aab1ca6384 100644 --- a/trunk/arch/powerpc/configs/44x/virtex5_defconfig +++ b/trunk/arch/powerpc/configs/44x/virtex5_defconfig @@ -691,7 +691,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set diff --git a/trunk/arch/powerpc/configs/linkstation_defconfig b/trunk/arch/powerpc/configs/linkstation_defconfig index 15900dcf0bfa..aa5855a156de 100644 --- a/trunk/arch/powerpc/configs/linkstation_defconfig +++ b/trunk/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:07:38 2009 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:29 2009 # # CONFIG_PPC64 is not set @@ -71,15 +71,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -97,7 +88,6 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -163,6 +153,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -299,6 +294,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y @@ -512,8 +508,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # @@ -591,6 +587,7 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -620,19 +617,13 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m -# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -848,7 +839,6 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set -# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1047,6 +1037,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/trunk/arch/powerpc/configs/storcenter_defconfig b/trunk/arch/powerpc/configs/storcenter_defconfig index 94903465ea12..86512c8790d1 100644 --- a/trunk/arch/powerpc/configs/storcenter_defconfig +++ b/trunk/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:09:08 2009 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:46 2009 # # CONFIG_PPC64 is not set @@ -71,15 +71,6 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -153,6 +144,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -381,8 +377,8 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # @@ -456,6 +452,7 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +478,13 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -686,7 +677,6 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set -# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -828,6 +818,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1167,7 +1159,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_EXPORTFS=m # # Partition Types diff --git a/trunk/arch/powerpc/include/asm/bootx.h b/trunk/arch/powerpc/include/asm/bootx.h index 60a3c9ef3017..57b82e3f89ce 100644 --- a/trunk/arch/powerpc/include/asm/bootx.h +++ b/trunk/arch/powerpc/include/asm/bootx.h @@ -9,7 +9,7 @@ #ifndef __ASM_BOOTX_H__ #define __ASM_BOOTX_H__ -#include +#include #ifdef macintosh #include diff --git a/trunk/arch/powerpc/include/asm/elf.h b/trunk/arch/powerpc/include/asm/elf.h index b5600ce6055e..cd46f023ec6d 100644 --- a/trunk/arch/powerpc/include/asm/elf.h +++ b/trunk/arch/powerpc/include/asm/elf.h @@ -7,7 +7,7 @@ #include #endif -#include +#include #include #include #include diff --git a/trunk/arch/powerpc/include/asm/kvm.h b/trunk/arch/powerpc/include/asm/kvm.h index 4e0cf65f7f5a..f993e4198d5c 100644 --- a/trunk/arch/powerpc/include/asm/kvm.h +++ b/trunk/arch/powerpc/include/asm/kvm.h @@ -20,7 +20,7 @@ #ifndef __LINUX_KVM_POWERPC_H #define __LINUX_KVM_POWERPC_H -#include +#include struct kvm_regs { __u64 pc; diff --git a/trunk/arch/powerpc/include/asm/ps3fb.h b/trunk/arch/powerpc/include/asm/ps3fb.h index e7233a849680..3f121fe4010d 100644 --- a/trunk/arch/powerpc/include/asm/ps3fb.h +++ b/trunk/arch/powerpc/include/asm/ps3fb.h @@ -19,7 +19,6 @@ #ifndef _ASM_POWERPC_PS3FB_H_ #define _ASM_POWERPC_PS3FB_H_ -#include #include /* ioctl */ diff --git a/trunk/arch/powerpc/include/asm/spu_info.h b/trunk/arch/powerpc/include/asm/spu_info.h index 1286c823f0d8..3545efbf9891 100644 --- a/trunk/arch/powerpc/include/asm/spu_info.h +++ b/trunk/arch/powerpc/include/asm/spu_info.h @@ -23,10 +23,9 @@ #ifndef _SPU_INFO_H #define _SPU_INFO_H -#include - #ifdef __KERNEL__ #include +#include #else struct mfc_cq_sr { __u64 mfc_cq_data0_RW; diff --git a/trunk/arch/powerpc/include/asm/swab.h b/trunk/arch/powerpc/include/asm/swab.h index c581e3ef73ed..ef824ae4b79c 100644 --- a/trunk/arch/powerpc/include/asm/swab.h +++ b/trunk/arch/powerpc/include/asm/swab.h @@ -8,7 +8,7 @@ * 2 of the License, or (at your option) any later version. */ -#include +#include #include #ifdef __GNUC__ diff --git a/trunk/arch/powerpc/kernel/irq.c b/trunk/arch/powerpc/kernel/irq.c index ad1e5ac721d8..23b8b5e36f98 100644 --- a/trunk/arch/powerpc/kernel/irq.c +++ b/trunk/arch/powerpc/kernel/irq.c @@ -231,7 +231,7 @@ void fixup_irqs(cpumask_t map) if (irq_desc[irq].status & IRQ_PER_CPU) continue; - cpumask_and(&mask, irq_desc[irq].affinity, &map); + cpus_and(mask, irq_desc[irq].affinity, map); if (any_online_cpu(mask) == NR_CPUS) { printk("Breaking affinity for irq %i\n", irq); mask = map; diff --git a/trunk/arch/powerpc/kernel/vmlinux.lds.S b/trunk/arch/powerpc/kernel/vmlinux.lds.S index 295ccc5e86b1..161b9b9691f0 100644 --- a/trunk/arch/powerpc/kernel/vmlinux.lds.S +++ b/trunk/arch/powerpc/kernel/vmlinux.lds.S @@ -184,7 +184,6 @@ SECTIONS . = ALIGN(PAGE_SIZE); .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { __per_cpu_start = .; - *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; diff --git a/trunk/arch/powerpc/platforms/86xx/gef_sbc610.c b/trunk/arch/powerpc/platforms/86xx/gef_sbc610.c index d6b772ba3b8f..fb371f5ce132 100644 --- a/trunk/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/trunk/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -142,10 +142,6 @@ static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev) { unsigned int val; - /* Do not do the fixup on other platforms! */ - if (!machine_is(gef_sbc610)) - return; - printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ diff --git a/trunk/arch/powerpc/platforms/embedded6xx/linkstation.c b/trunk/arch/powerpc/platforms/embedded6xx/linkstation.c index 244f997de791..2ca7be65c2d2 100644 --- a/trunk/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/trunk/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -12,6 +12,7 @@ #include #include +#include #include #include @@ -21,6 +22,39 @@ #include "mpc10x.h" +static struct mtd_partition linkstation_physmap_partitions[] = { + { + .name = "mtd_firmimg", + .offset = 0x000000, + .size = 0x300000, + }, + { + .name = "mtd_bootcode", + .offset = 0x300000, + .size = 0x070000, + }, + { + .name = "mtd_status", + .offset = 0x370000, + .size = 0x010000, + }, + { + .name = "mtd_conf", + .offset = 0x380000, + .size = 0x080000, + }, + { + .name = "mtd_allflash", + .offset = 0x000000, + .size = 0x400000, + }, + { + .name = "mtd_data", + .offset = 0x310000, + .size = 0x0f0000, + }, +}; + static __initdata struct of_device_id of_bus_ids[] = { { .type = "soc", }, { .compatible = "simple-bus", }, @@ -65,6 +99,10 @@ static int __init linkstation_add_bridge(struct device_node *dev) static void __init linkstation_setup_arch(void) { struct device_node *np; +#ifdef CONFIG_MTD_PHYSMAP + physmap_set_partitions(linkstation_physmap_partitions, + ARRAY_SIZE(linkstation_physmap_partitions)); +#endif /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") diff --git a/trunk/arch/powerpc/platforms/embedded6xx/storcenter.c b/trunk/arch/powerpc/platforms/embedded6xx/storcenter.c index 613070e9ddbe..8864e4884980 100644 --- a/trunk/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/trunk/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -25,6 +26,32 @@ #include "mpc10x.h" +#ifdef CONFIG_MTD_PHYSMAP +static struct mtd_partition storcenter_physmap_partitions[] = { + { + .name = "kernel", + .offset = 0x000000, + .size = 0x170000, + }, + { + .name = "rootfs", + .offset = 0x170000, + .size = 0x590000, + }, + { + .name = "uboot", + .offset = 0x700000, + .size = 0x040000, + }, + { + .name = "config", + .offset = 0x740000, + .size = 0x0c0000, + }, +}; +#endif + + static __initdata struct of_device_id storcenter_of_bus[] = { { .name = "soc", }, {}, @@ -69,6 +96,11 @@ static void __init storcenter_setup_arch(void) { struct device_node *np; +#ifdef CONFIG_MTD_PHYSMAP + physmap_set_partitions(storcenter_physmap_partitions, + ARRAY_SIZE(storcenter_physmap_partitions)); +#endif + /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") storcenter_add_bridge(np); diff --git a/trunk/arch/powerpc/platforms/pseries/xics.c b/trunk/arch/powerpc/platforms/pseries/xics.c index 80b513449f4c..84e058f1e1cc 100644 --- a/trunk/arch/powerpc/platforms/pseries/xics.c +++ b/trunk/arch/powerpc/platforms/pseries/xics.c @@ -153,10 +153,9 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check) { int server; /* For the moment only implement delivery to all cpus or one cpu */ - cpumask_t cpumask; + cpumask_t cpumask = irq_desc[virq].affinity; cpumask_t tmp = CPU_MASK_NONE; - cpumask_copy(&cpumask, irq_desc[virq].affinity); if (!distribute_irqs) return default_server; @@ -870,7 +869,7 @@ void xics_migrate_irqs_away(void) virq, cpu); /* Reset affinity to all cpus */ - cpumask_setall(irq_desc[virq].affinity); + irq_desc[virq].affinity = CPU_MASK_ALL; desc->chip->set_affinity(virq, cpu_all_mask); unlock: spin_unlock_irqrestore(&desc->lock, flags); diff --git a/trunk/arch/powerpc/sysdev/mpic.c b/trunk/arch/powerpc/sysdev/mpic.c index 532e205303a2..a35297dbac28 100644 --- a/trunk/arch/powerpc/sysdev/mpic.c +++ b/trunk/arch/powerpc/sysdev/mpic.c @@ -566,10 +566,9 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) #ifdef CONFIG_SMP static int irq_choose_cpu(unsigned int virt_irq) { - cpumask_t mask; + cpumask_t mask = irq_desc[virt_irq].affinity; int cpuid; - cpumask_copy(&mask, irq_desc[virt_irq].affinity); if (cpus_equal(mask, CPU_MASK_ALL)) { static int irq_rover; static DEFINE_SPINLOCK(irq_rover_lock); diff --git a/trunk/arch/sh/boards/board-ap325rxa.c b/trunk/arch/sh/boards/board-ap325rxa.c index 15b6d450fbf0..72da416f6162 100644 --- a/trunk/arch/sh/boards/board-ap325rxa.c +++ b/trunk/arch/sh/boards/board-ap325rxa.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include