diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 728c38c242d6..56fb62b09fc5 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -141,3 +141,4 @@ Version History 1.2.0 Handle creation of arrays that contain failed devices. 1.3.0 Added support for RAID 10 1.3.1 Allow device replacement/rebuild for RAID 10 +1.3.2 Fix/improve redundancy checking for RAID10 diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 3a268127b054..bc50899e0c81 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -81,7 +81,8 @@ PA31 TXD4 Required properties for pin configuration node: - atmel,pins: 4 integers array, represents a group of pins mux and config setting. The format is atmel,pins = . - The PERIPH 0 means gpio. + The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... + PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... Bits used for CONFIG: PULL_UP (1 << 0): indicate this pin need a pull up. @@ -126,7 +127,7 @@ pinctrl@fffff400 { pinctrl_dbgu: dbgu-0 { atmel,pins = <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + 1 15 0x1 0x1>; /* PB15 periph A with pullup */ }; }; }; diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index 8fbd8b46ee34..dcf338e62b71 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -175,9 +175,9 @@ consists of multiple segments as described below. align with the zone size <-| |-> align with the segment size _________________________________________________________________________ - | | | Node | Segment | Segment | | - | Superblock | Checkpoint | Address | Info. | Summary | Main | - | (SB) | (CP) | Table (NAT) | Table (SIT) | Area (SSA) | | + | | | Segment | Node | Segment | | + | Superblock | Checkpoint | Info. | Address | Summary | Main | + | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | | |____________|_____2______|______N______|______N______|______N_____|__N___| . . . . @@ -200,14 +200,14 @@ consists of multiple segments as described below. : It contains file system information, bitmaps for valid NAT/SIT sets, orphan inode lists, and summary entries of current active segments. -- Node Address Table (NAT) - : It is composed of a block address table for all the node blocks stored in - Main area. - - Segment Information Table (SIT) : It contains segment information such as valid block count and bitmap for the validity of all the blocks. +- Node Address Table (NAT) + : It is composed of a block address table for all the node blocks stored in + Main area. + - Segment Summary Area (SSA) : It contains summary entries which contains the owner information of all the data and node blocks stored in Main area. @@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are valid, as shown as below. +--------+----------+---------+ - | CP | NAT | SIT | + | CP | SIT | NAT | +--------+----------+---------+ . . . . . . . . . . . . +-------+-------+--------+--------+--------+--------+ - | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 | + | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 | +-------+-------+--------+--------+--------+--------+ | ^ ^ | | | diff --git a/Documentation/hid/hid-sensor.txt b/Documentation/hid/hid-sensor.txt old mode 100755 new mode 100644 diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 406d82d5d2bb..3edb4c2887a1 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -57,6 +57,10 @@ Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover protocol entry point. +Protocol 2.12: (Kernel 3.9) Added the xloadflags field and extension fields + to struct boot_params for for loading bzImage and ramdisk + above 4G in 64bit. + **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -182,7 +186,7 @@ Offset Proto Name Meaning 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not 0235/1 2.10+ min_alignment Minimum alignment, as a power of two -0236/2 N/A pad3 Unused +0236/2 2.12+ xloadflags Boot protocol option flags 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture 0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data @@ -582,6 +586,27 @@ Protocol: 2.10+ misaligned kernel. Therefore, a loader should typically try each power-of-two alignment from kernel_alignment down to this alignment. +Field name: xloadflags +Type: read +Offset/size: 0x236/2 +Protocol: 2.12+ + + This field is a bitmask. + + Bit 0 (read): XLF_KERNEL_64 + - If 1, this kernel has the legacy 64-bit entry point at 0x200. + + Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G + - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G. + + Bit 2 (read): XLF_EFI_HANDOVER_32 + - If 1, the kernel supports the 32-bit EFI handoff entry point + given at handover_offset. + + Bit 3 (read): XLF_EFI_HANDOVER_64 + - If 1, the kernel supports the 64-bit EFI handoff entry point + given at handover_offset + 0x200. + Field name: cmdline_size Type: read Offset/size: 0x238/4 diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index cf5437deda81..199f453cb4de 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -19,6 +19,9 @@ Offset Proto Name Meaning 090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! 0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) 0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends +0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits +0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits +0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits 140/080 ALL edid_info Video mode setup (struct edid_info) 1C0/020 ALL efi_info EFI 32 information (struct efi_info) 1E0/004 ALL alk_mem_k Alternative mem check, in KB @@ -27,6 +30,7 @@ Offset Proto Name Meaning 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) 1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer (below) +1EF/001 ALL sentinel Used to detect broken bootloaders 290/040 ALL edd_mbr_sig_buffer EDD MBR signatures 2D0/A00 ALL e820_map E820 memory map table (array of struct e820entry) diff --git a/MAINTAINERS b/MAINTAINERS index 3105c4868c4e..212c255b9347 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2966,7 +2966,7 @@ S: Maintained F: drivers/net/ethernet/i825xx/eexpress.* ETHERNET BRIDGE -M: Stephen Hemminger +M: Stephen Hemminger L: bridge@lists.linux-foundation.org L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net:Bridge @@ -4905,7 +4905,7 @@ S: Maintained MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2) M: Mirko Lindner -M: Stephen Hemminger +M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/marvell/sk* @@ -5180,7 +5180,7 @@ S: Supported F: drivers/infiniband/hw/nes/ NETEM NETWORK EMULATOR -M: Stephen Hemminger +M: Stephen Hemminger L: netem@lists.linux-foundation.org S: Maintained F: net/sched/sch_netem.c @@ -6585,7 +6585,7 @@ F: drivers/media/platform/s3c-camif/ F: include/media/s3c_camif.h SERIAL DRIVERS -M: Alan Cox +M: Greg Kroah-Hartman L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial @@ -7088,7 +7088,7 @@ F: include/uapi/sound/ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) -M: Liam Girdwood +M: Liam Girdwood M: Mark Brown T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) diff --git a/Makefile b/Makefile index 253a455d8d8d..54dfde5e9f9e 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc4 -NAME = Terrified Chipmunk +EXTRAVERSION = -rc6 +NAME = Unicycling Gorilla # *DOCUMENTATION* # To see a list of typical targets execute "make help" @@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 00044026ef1f..9b82facb2561 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x40000000>; /* 1 GB */ }; soc { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 271855a6e224..e041f42ed711 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -50,27 +50,25 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <17>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>; + interrupts = <87>, <88>, <89>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 1c1937dbce73..9e23bd8c9536 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -51,39 +51,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 4905cf3a5ef8..965966110e38 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -66,39 +66,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index e154f242c680..222047f1ece9 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -336,8 +336,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 25 0 /* sda */ + &pioA 26 0 /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 3a47cf952146..8ecca6948d81 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -143,6 +143,11 @@ atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */ }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; }; usart1 { @@ -154,12 +159,17 @@ pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 27 0x3 0x0>; /* PC27 periph C */ + <2 27 0x3 0x0>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 28 0x3 0x0>; /* PC28 periph C */ + <2 28 0x3 0x0>; /* PC28 periph C */ + }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <2 28 0x3 0x0>; /* PC29 periph C */ }; }; @@ -172,46 +182,56 @@ pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 0 0x2 0x0>; /* PB0 periph B */ + <1 0 0x2 0x0>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 1 0x2 0x0>; /* PB1 periph B */ + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <1 2 0x2 0x0>; /* PB2 periph B */ }; }; usart3 { pinctrl_uart3: usart3-0 { atmel,pins = - <3 23 0x2 0x1 /* PC22 periph B with pullup */ - 3 23 0x2 0x0>; /* PC23 periph B */ + <2 23 0x2 0x1 /* PC22 periph B with pullup */ + 2 23 0x2 0x0>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <3 24 0x2 0x0>; /* PC24 periph B */ + <2 24 0x2 0x0>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <3 25 0x2 0x0>; /* PC25 periph B */ + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <2 26 0x2 0x0>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <3 8 0x3 0x0 /* PC8 periph C */ - 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + <2 8 0x3 0x0 /* PC8 periph C */ + 2 9 0x3 0x1>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <3 16 0x3 0x0 /* PC16 periph C */ - 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + <2 16 0x3 0x0 /* PC16 periph C */ + 2 17 0x3 0x1>; /* PC17 periph C with pullup */ }; }; @@ -240,14 +260,14 @@ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PA8 periph A */ - 1 11 0x1 0x0 /* PA11 periph A */ - 1 12 0x1 0x0 /* PA12 periph A */ - 1 13 0x1 0x0 /* PA13 periph A */ - 1 14 0x1 0x0 /* PA14 periph A */ - 1 15 0x1 0x0 /* PA15 periph A */ - 1 16 0x1 0x0 /* PA16 periph A */ - 1 17 0x1 0x0>; /* PA17 periph A */ + <1 8 0x1 0x0 /* PB8 periph A */ + 1 11 0x1 0x0 /* PB11 periph A */ + 1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ }; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index fddd17417433..46c098017036 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -96,8 +96,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -120,8 +120,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -141,8 +141,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index fed7d3f9f431..cdee96fca6e2 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -26,10 +26,15 @@ }; &uart0 { status = "okay"; }; -&sdio0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; +&sdio0 { + status = "okay"; + /* sdio0 card detect is connected to wrong pin on CuBox */ + cd-gpios = <&gpio0 12 1>; +}; + &spi0 { status = "okay"; @@ -42,9 +47,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; pinctrl-names = "default"; + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_18: pmx-gpio-18 { marvell,pins = "mpp18"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 942d5761ca97..e05b18f3c33d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -115,8 +115,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -139,8 +139,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 9bc6785ad228..77d21abfcdf7 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,21 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 + &pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; + + pmx_ns2_sata0: pmx-ns2-sata0 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_ns2_sata1: pmx-ns2-sata1 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + }; + serial@12000 { clock-frequency = <166666667>; status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 110d6cbb795b..d6ab442b7011 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -36,6 +36,7 @@ reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; }; @@ -46,6 +47,7 @@ reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; }; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index e8814fe0e277..b4dc3ed9a3ec 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -48,6 +48,8 @@ macb0: ethernet@fffc4000 { phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi index 8bbc2bfef221..8b36abea9f2e 100644 --- a/arch/arm/boot/dts/sunxi.dtsi +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -60,19 +60,21 @@ }; uart0: uart@01c28000 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; uart1: uart@01c28400 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 1fc405a9ecfb..cf8071ad22d5 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -45,7 +45,6 @@ reg = <1>; }; -/* A7s disabled till big.LITTLE patches are available... cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -63,7 +62,6 @@ compatible = "arm,cortex-a7"; reg = <0x102>; }; -*/ }; memory@80000000 { diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index b175577d7abb..1ea959019fcd 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y +CONFIG_SOC_AT91SAM9N12=y CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 @@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 82ce8d738fa1..76938cb50b45 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -52,6 +52,11 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y @@ -64,6 +69,7 @@ CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -83,6 +89,9 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -108,6 +117,7 @@ CONFIG_USB_KC2190=y CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MATRIX=m CONFIG_KEYBOARD_TWL4030=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y @@ -131,14 +141,17 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y +CONFIG_SENSORS_LM75=m CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -150,6 +163,7 @@ CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m CONFIG_PANEL_GENERIC_DPI=m +CONFIG_PANEL_TFP410=m CONFIG_PANEL_SHARP_LS037V7DW01=m CONFIG_PANEL_NEC_NL8048HL11_01B=m CONFIG_PANEL_TAAL=m @@ -196,9 +210,20 @@ CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_OMAP=y CONFIG_DMADEVICES=y CONFIG_DMA_OMAP=y CONFIG_EXT2_FS=y diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 6809200c31fb..14f7c3b14632 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,12 +100,14 @@ ENTRY(printch) b 1b ENDPROC(printch) +#ifdef CONFIG_MMU ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] mov pc, lr ENDPROC(debug_ll_addr) +#endif #else diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4eee351f4668..486a15ae9011 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -246,6 +246,7 @@ __create_page_tables: /* * Then map boot params address in r2 if specified. + * We map 2 sections in case the ATAGs/DTB crosses a section boundary. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT @@ -253,6 +254,8 @@ __create_page_tables: addne r3, r3, #PAGE_OFFSET addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orrne r6, r7, r0 + strne r6, [r3], #1 << PMD_ORDER + addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] #ifdef CONFIG_DEBUG_LL @@ -331,7 +334,7 @@ ENTRY(secondary_startup) * as it has already been validated by the primary processor. */ #ifdef CONFIG_ARM_VIRT_EXT - bl __hyp_stub_install + bl __hyp_stub_install_secondary #endif safe_svcmode_maskall r9 diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 65b2417aebce..1315c4ccfa56 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - bxne lr + movne pc, lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - bxne lr @ give up if the CPU is not in HYP mode + movne pc, lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary) * Eventually, CPU-specific code might be needed -- assume not for now * * This code relies on the "eret" instruction to synchronize the - * various coprocessor accesses. + * various coprocessor accesses. This is done when we switch to SVC + * (see safe_svcmode_maskall). */ @ Now install the hypervisor stub: adr r7, __hyp_stub_vectors @@ -155,14 +156,7 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE 1: #endif - bic r7, r4, #MODE_MASK - orr r7, r7, #SVC_MODE -THUMB( orr r7, r7, #PSR_T_BIT ) - msr spsr_cxsf, r7 @ This is SPSR_hyp. - - __MSR_ELR_HYP(14) @ msr elr_hyp, lr - __ERET @ return, switching to SVC mode - @ The boot CPU mode is left in r4. + bx lr @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) __hyp_stub_do_trap: @@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - bx lr + mov pc, lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 9ee866ce0478..4b678478cf95 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3e628fd7a674..0a2349dc7018 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -851,6 +851,7 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC + select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index b197aa73dc4b..2c570cdaae7b 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -254,9 +254,9 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); /* i.mx25 has the i.mx35 type cspi */ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 4c1d1e4efc74..1ffe3b534e51 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8be64e0a4ace..16ccbd41dea9 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); /* i.mx31 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 66f3d65ea275..f0727e80815d 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -251,9 +251,9 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 579023f59dc1..fb7cb841b64c 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51"); clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7f2c10c7413a..c0c4e723b7f5 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 7191ab4434e5..fa36fb84ab19 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); extern void imx_cpu_die(unsigned int cpu); +extern int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM extern void imx6q_pm_init(void); diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 6277baf1b7be..9bd5777ff0e7 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan( #include struct imx_fsl_usb2_udc_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 37e44398197b..3c06bd96e9cc 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -11,35 +11,36 @@ #include "../hardware.h" #include "devices-common.h" -#define imx_fsl_usb2_udc_data_entry_single(soc) \ +#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _USB_OTG_BASE_ADDR, \ .irq = soc ## _INT_USB_OTG, \ } #ifdef CONFIG_SOC_IMX25 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25); + imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX27); + imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX31); + imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX35); + imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX51); + imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51"); #endif struct platform_device *__init imx_add_fsl_usb2_udc( @@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("fsl-usb2-udc", -1, + return imx_add_platform_device_dmamask(data->devid, -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 10b0ed39f07f..25a47c616b2d 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("imx-fb", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3dec962b0770..7bc5fe15dda2 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); - imx_enable_cpu(cpu, false); + cpu_do_idle(); +} - /* spin here until hardware takes it down */ - while (1) - ; +int imx_cpu_kill(unsigned int cpu) +{ + imx_enable_cpu(cpu, false); + return 1; } diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 6c80424f678e..e05cf407db65 100644 --- a/arch/arm/mach-imx/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,8 +22,7 @@ #include #include #include - -#include "iram.h" +#include "linux/platform_data/imx-iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 3777b805b76b..66fae885c842 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = { .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, + .cpu_kill = imx_cpu_kill, #endif }; diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index a17543da602d..ee42d20cba19 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state) cpu_suspend(0, imx6q_suspend_finish); imx_smp_prepare(); imx_gpc_post_resume(); + imx6q_set_lpm(WAIT_CLOCKED); break; default: return -EINVAL; diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index be50e795536d..e7fcea7f3300 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) { int ret = 0; + if (!ap_syscon_base) + return -EINVAL; + if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) - return -EINVAL; } return ret; @@ -497,6 +496,13 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + pr_err("unable to remap the AP syscon for PCIv3\n"); + return; + } + pcibios_min_mem = 0x00100000; /* diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index 8821720ab5a4..f4632a809f68 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -18,47 +18,11 @@ #include #include #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data ns2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int ns2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ - MPP33_GPO, /* Fan speed (bit 2) */ - 0 -}; - #define NS2_GPIO_POWER_OFF 31 static void ns2_power_off(void) @@ -71,8 +35,6 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(ns2_mpp_config); - if (of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 5dcb369b58aa..99df4df680fd 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,6 +1,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include +AFLAGS_coherency_ll.o := -Wa,-march=armv7-a + obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 24d2f2df11a0..ecd3f2a61bd4 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include #include @@ -23,6 +24,8 @@ #include #include +#include +#include #include #include @@ -212,6 +215,45 @@ static inline void nokia770_mmc_init(void) } #endif +#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) +static struct i2c_cbus_platform_data nokia770_cbus_data = { + .clk_gpio = OMAP_MPUIO(9), + .dat_gpio = OMAP_MPUIO(10), + .sel_gpio = OMAP_MPUIO(11), +}; + +static struct platform_device nokia770_cbus_device = { + .name = "i2c-cbus-gpio", + .id = 2, + .dev = { + .platform_data = &nokia770_cbus_data, + }, +}; + +static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { + { + I2C_BOARD_INFO("retu-mfd", 0x01), + }, +}; + +static void __init nokia770_cbus_init(void) +{ + const int retu_irq_gpio = 62; + + if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) + return; + irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio); + i2c_register_board_info(2, nokia770_i2c_board_info_2, + ARRAY_SIZE(nokia770_i2c_board_info_2)); + platform_device_register(&nokia770_cbus_device); +} +#else /* CONFIG_I2C_CBUS_GPIO */ +static void __init nokia770_cbus_init(void) +{ +} +#endif /* CONFIG_I2C_CBUS_GPIO */ + static void __init omap_nokia770_init(void) { /* On Nokia 770, the SleepX signal is masked with an @@ -233,6 +275,7 @@ static void __init omap_nokia770_init(void) mipid_dev_init(); omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); + nokia770_cbus_init(); } MACHINE_START(NOKIA770, "Nokia 770") diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 41b581fd0213..d4e4f9590a95 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -165,12 +165,6 @@ config MACH_OMAP_H4 select OMAP_DEBUG_DEVICES select OMAP_PACKAGE_ZAF -config MACH_OMAP_APOLLON - bool "OMAP 2420 Apollon board" - depends on SOC_OMAP2420 - default y - select OMAP_PACKAGE_ZAC - config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on SOC_OMAP2430 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 947cafe65aef..0c66759a1174 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -220,7 +220,6 @@ endif obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o -obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 51b96a1206d1..82805de80056 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -20,12 +20,18 @@ #include #include #include +#include +#include +#include +#include #include #include #include #include "common.h" +#include "common-board-devices.h" +#include "board-flash.h" #include "am35xx-emac.h" #include "mux.h" @@ -36,6 +42,7 @@ #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -51,6 +58,54 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +static struct mtd_partition crane_nand_partitions[] = { + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 14 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 40 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct tps65910_board tps65910_pdata = { + .irq = 7 + OMAP_INTC_START, + .en_ck32k_xtal = true, +}; + +static struct i2c_board_info __initdata tps65910_board_info[] = { + { + I2C_BOARD_INFO("tps65910", 0x2d), + .platform_data = &tps65910_pdata, + }, +}; + +static void __init am3517_crane_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, tps65910_board_info, + ARRAY_SIZE(tps65910_board_info)); +} + static void __init am3517_crane_init(void) { int ret; @@ -58,6 +113,10 @@ static void __init am3517_crane_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); + board_nand_init(crane_nand_partitions, + ARRAY_SIZE(crane_nand_partitions), 0, + NAND_BUSWIDTH_16, NULL); + am3517_crane_i2c_init(); /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c deleted file mode 100644 index 5d0a61f54165..000000000000 --- a/arch/arm/mach-omap2/board-apollon.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-apollon.c - * - * Copyright (C) 2005,2006 Samsung Electronics - * Author: Kyungmin Park - * - * Modified from mach-omap/omap2/board-h4.c - * - * Code for apollon OMAP2 board. Should work on many OMAP2 systems where - * the bootloader passes the board-specific data to the kernel. - * Do not put any board specific code to this file; create a new machine - * type if you need custom low-level initializations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "common.h" -#include "gpmc.h" - -#include