From 095fec887eaa1c38d17c0c929a6733c744a9fa1f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 09:50:49 -0500 Subject: [PATCH 001/169] [libata sata_mv] minor fixes - clear SError and EDMA irq cause registers, after re-init'ing the phy - move enums with type suffix 'U' to their own enum --- drivers/scsi/sata_mv.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 257c128f4aaa..82d1750e779b 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -72,11 +72,6 @@ enum { MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), - /* Our DMA boundary is determined by an ePRD being unable to handle - * anything larger than 64KB - */ - MV_DMA_BOUNDARY = 0xffffU, - MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, @@ -192,7 +187,6 @@ enum { EDMA_REQ_Q_BASE_HI_OFS = 0x10, EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ - EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, EDMA_REQ_Q_OUT_PTR_OFS = 0x18, EDMA_REQ_Q_PTR_SHIFT = 5, @@ -200,7 +194,6 @@ enum { EDMA_RSP_Q_BASE_HI_OFS = 0x1c, EDMA_RSP_Q_IN_PTR_OFS = 0x20, EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ - EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, EDMA_RSP_Q_PTR_SHIFT = 3, EDMA_CMD_OFS = 0x28, @@ -216,6 +209,17 @@ enum { MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; +enum { + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, + + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, +}; + /* Command ReQuest Block: 32B */ struct mv_crqb { u32 sg_addr; @@ -1215,6 +1219,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, */ static void mv_phy_reset(struct ata_port *ap) { + struct mv_port_priv *pp = ap->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; @@ -1232,7 +1237,7 @@ static void mv_phy_reset(struct ata_port *ap) */ writelfl(0, port_mmio + EDMA_CMD_OFS); - VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); @@ -1247,7 +1252,9 @@ static void mv_phy_reset(struct ata_port *ap) break; } while (time_before(jiffies, timeout)); - VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + mv_scr_write(ap, SCR_ERROR, mv_scr_read(ap, SCR_ERROR)); + + DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); @@ -1271,7 +1278,12 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("Port disabled post-sig: No device present.\n"); ata_port_disable(ap); } - VPRINTK("EXIT\n"); + + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + + printk("EXIT\n"); } /** From 8b260248d9e0e8b64bb72fd4dee03ad86984c344 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 12:32:50 -0500 Subject: [PATCH 002/169] [libata sata_mv] trim trailing whitespace --- drivers/scsi/sata_mv.c | 76 +++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 38 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 82d1750e779b..26e9d51e6caf 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1,7 +1,7 @@ /* * sata_mv.c - Marvell SATA support * - * Copyright 2005: EMC Corporation, all rights reserved. + * Copyright 2005: EMC Corporation, all rights reserved. * * Please ALWAYS copy linux-ide@vger.kernel.org on emails. * @@ -84,7 +84,7 @@ enum { MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | + MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | MV_FLAG_GLBL_SFT_RST), chip_504x = 0, @@ -129,7 +129,7 @@ enum { SELF_INT = (1 << 23), TWSI_INT = (1 << 24), HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ - HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | + HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | HC_MAIN_RSVD), @@ -177,12 +177,12 @@ enum { EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), EDMA_ERR_LNK_DATA_TX = (0x1f << 26), EDMA_ERR_TRANS_PROTO = (1 << 31), - EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | + EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR | EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR | - EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | + EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | EDMA_ERR_LNK_DATA_RX | - EDMA_ERR_LNK_DATA_TX | + EDMA_ERR_LNK_DATA_TX | EDMA_ERR_TRANS_PROTO), EDMA_REQ_Q_BASE_HI_OFS = 0x10, @@ -345,7 +345,7 @@ static struct ata_port_info mv_port_info[] = { }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -393,7 +393,7 @@ static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) { return (mv_hc_base(base, port >> MV_PORT_HC_SHIFT) + - MV_SATAHC_ARBTR_REG_SZ + + MV_SATAHC_ARBTR_REG_SZ + ((port & MV_PORT_MASK) * MV_PORT_REG_SZ)); } @@ -456,7 +456,7 @@ static void mv_stop_dma(struct ata_port *ap) } else { assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); } - + /* now properly wait for the eDMA to stop */ for (i = 1000; i > 0; i--) { reg = readl(port_mmio + EDMA_CMD_OFS); @@ -507,7 +507,7 @@ static void mv_dump_all_regs(void __iomem *mmio_base, int port, struct pci_dev *pdev) { #ifdef ATA_DEBUG - void __iomem *hc_base = mv_hc_base(mmio_base, + void __iomem *hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT); void __iomem *port_base; int start_port, num_ports, p, start_hc, num_hcs, hc; @@ -521,7 +521,7 @@ static void mv_dump_all_regs(void __iomem *mmio_base, int port, start_port = port; num_ports = num_hcs = 1; } - DPRINTK("All registers for port(s) %u-%u:\n", start_port, + DPRINTK("All registers for port(s) %u-%u:\n", start_port, num_ports > 1 ? num_ports - 1 : start_port); if (NULL != pdev) { @@ -705,7 +705,7 @@ static int mv_port_start(struct ata_port *ap) goto err_out; memset(pp, 0, sizeof(*pp)); - mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); if (!mem) goto err_out_pp; @@ -715,7 +715,7 @@ static int mv_port_start(struct ata_port *ap) if (rc) goto err_out_priv; - /* First item in chunk of DMA memory: + /* First item in chunk of DMA memory: * 32-slot command request table (CRQB), 32 bytes each in size */ pp->crqb = mem; @@ -723,7 +723,7 @@ static int mv_port_start(struct ata_port *ap) mem += MV_CRQB_Q_SZ; mem_dma += MV_CRQB_Q_SZ; - /* Second item: + /* Second item: * 32-slot command response table (CRPB), 8 bytes each in size */ pp->crpb = mem; @@ -737,18 +737,18 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl = mem; pp->sg_tbl_dma = mem_dma; - writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | + writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); - writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); pp->req_producer = pp->rsp_consumer = 0; @@ -863,7 +863,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) } /* the req producer index should be the same as we remember it */ - assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == pp->req_producer); @@ -875,9 +875,9 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) assert(MV_MAX_Q_DEPTH > qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; - pp->crqb[pp->req_producer].sg_addr = + pp->crqb[pp->req_producer].sg_addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); - pp->crqb[pp->req_producer].sg_addr_hi = + pp->crqb[pp->req_producer].sg_addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); @@ -900,7 +900,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) #ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ case ATA_CMD_FPDMA_READ: case ATA_CMD_FPDMA_WRITE: - mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); break; #endif /* FIXME: remove this line when NCQ added */ @@ -966,7 +966,7 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) pp->req_producer); /* until we do queuing, the queue should be empty at this point */ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); mv_inc_q_index(&pp->req_producer); /* now incr producer index */ @@ -1003,15 +1003,15 @@ static u8 mv_get_crpb_status(struct ata_port *ap) out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); /* the response consumer index should be the same as we remember it */ - assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == pp->rsp_consumer); /* increment our consumer index... */ pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); - + /* and, until we do NCQ, there should only be 1 CRPB waiting */ - assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> - EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == pp->rsp_consumer); /* write out our inc'd consumer index so EDMA knows we're caught up */ @@ -1135,7 +1135,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, err_mask |= AC_ERR_OTHER; handled++; } - + if (handled && ap) { qc = ata_qc_from_tag(ap, ap->active_tag); if (NULL != qc) { @@ -1150,7 +1150,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, } /** - * mv_interrupt - + * mv_interrupt - * @irq: unused * @dev_instance: private data; in this case the host structure * @regs: unused @@ -1160,7 +1160,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, * routine to handle. Also check for PCI errors which are only * reported here. * - * LOCKING: + * LOCKING: * This routine holds the host_set lock while processing pending * interrupts. */ @@ -1303,12 +1303,12 @@ static void mv_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); DPRINTK("All regs @ start of eng_timeout\n"); - mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, to_pci_dev(ap->host_set->dev)); qc = ata_qc_from_tag(ap, ap->active_tag); printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", - ap->host_set->mmio_base, ap, qc, qc->scsicmd, + ap->host_set->mmio_base, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd); mv_err_intr(ap); @@ -1348,17 +1348,17 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; unsigned serr_ofs; - /* PIO related setup + /* PIO related setup */ port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); - port->error_addr = + port->error_addr = port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); - port->status_addr = + port->status_addr = port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); /* special case: control/altstatus doesn't have ATA_REG_ address */ port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; @@ -1374,7 +1374,7 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) /* unmask all EDMA error interrupts */ writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); - VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", + VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", readl(port_mmio + EDMA_CFG_OFS), readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); @@ -1396,7 +1396,7 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) void __iomem *mmio = probe_ent->mmio_base; void __iomem *port_mmio; - if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && + if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && mv_global_soft_reset(probe_ent->mmio_base)) { rc = 1; goto done; @@ -1430,7 +1430,7 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " - "PCI int cause/mask=0x%08x/0x%08x\n", + "PCI int cause/mask=0x%08x/0x%08x\n", readl(mmio + HC_MAIN_IRQ_CAUSE_OFS), readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), @@ -1470,7 +1470,7 @@ static void mv_print_info(struct ata_probe_ent *probe_ent) dev_printk(KERN_INFO, &pdev->dev, "%u slots %u ports %s mode IRQ via %s\n", - (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); } From 9a68c1b9580886a2ff07a42733adb7583ee3d9ac Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 12:40:41 -0500 Subject: [PATCH 003/169] [libata sata_mv] note driver is "HIGHLY EXPERIMENTAL" in Kconfig --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 84c42c44e04d..20dd85a77813 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -497,7 +497,7 @@ config SCSI_ATA_PIIX If unsure, say N. config SCSI_SATA_MV - tristate "Marvell SATA support" + tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" depends on SCSI_SATA && PCI && EXPERIMENTAL help This option enables support for the Marvell Serial ATA family. From bca1c4eb9411533d613123618c0d127fae532595 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 12:48:15 -0500 Subject: [PATCH 004/169] [libata sata_mv] implement a bunch of errata workarounds Based largely on the GPL'd Marvell vendor driver. --- drivers/scsi/sata_mv.c | 268 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 261 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 26e9d51e6caf..b1696e353dd4 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -50,6 +50,8 @@ enum { MV_PCI_REG_BASE = 0, MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ MV_SATAHC0_REG_BASE = 0x20000, + MV_GPIO_PORT_CTL = 0x104f0, + MV_RESET_CFG = 0x180d8, MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, @@ -148,6 +150,11 @@ enum { /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ SATA_ACTIVE_OFS = 0x350, + PHY_MODE4 = 0x314, + PHY_MODE2 = 0x330, + SATA_INTERFACE_CTL = 0x050, + + MV_M2_PREAMP_MASK = 0x7e0, /* Port registers */ EDMA_CFG_OFS = 0, @@ -201,14 +208,26 @@ enum { EDMA_DS = (1 << 1), ATA_RST = (1 << 2), + EDMA_ARB_CFG = 0x38, + EDMA_NO_SNOOP = (1 << 6), + /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), + MV_HP_ERRATA_60X1A1 = (1 << 1), + MV_HP_ERRATA_60X1B0 = (1 << 2), + MV_HP_ERRATA_50XXB0 = (1 << 3), + MV_HP_ERRATA_50XXB1 = (1 << 4), + MV_HP_ERRATA_50XXB2 = (1 << 5), + MV_HP_50XX = (1 << 6), /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; +#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) +#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) + enum { /* Our DMA boundary is determined by an ePRD being unable to handle * anything larger than 64KB @@ -256,8 +275,14 @@ struct mv_port_priv { u32 pp_flags; }; +struct mv_port_signal { + u32 amps; + u32 pre; +}; + struct mv_host_priv { u32 hp_flags; + struct mv_port_signal signal[8]; }; static void mv_irq_clear(struct ata_port *ap); @@ -354,10 +379,12 @@ static struct ata_port_info mv_port_info[] = { }; static const struct pci_device_id mv_pci_tbl[] = { +#if 0 /* unusably broken right now */ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_508x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, +#endif {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, @@ -402,9 +429,9 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap) return mv_port_base(ap->host_set->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long hp_flags) +static inline int mv_get_hc_count(unsigned long host_flags) { - return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1); + return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } static void mv_irq_clear(struct ata_port *ap) @@ -694,6 +721,7 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) static int mv_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; + struct mv_host_priv *hpriv = ap->host_set->private_data; struct mv_port_priv *pp; void __iomem *port_mmio = mv_ap_base(ap); void *mem; @@ -751,6 +779,15 @@ static int mv_port_start(struct ata_port *ap) writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) { + u32 new_tmp, tmp; + + new_tmp = tmp = readl(port_mmio + EDMA_ARB_CFG); + new_tmp &= ~EDMA_NO_SNOOP; + if (new_tmp != tmp) + writel(new_tmp, port_mmio + EDMA_ARB_CFG); + } + pp->req_producer = pp->rsp_consumer = 0; /* Don't turn on EDMA here...do it before DMA commands only. Else @@ -1206,6 +1243,52 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +static void mv_phy_errata5(struct ata_port *ap) +{ + /* FIXME */ +} + +static void mv_phy_errata6(struct ata_port *ap) +{ + struct mv_host_priv *hpriv = ap->host_set->private_data; + u32 hp_flags = hpriv->hp_flags; + void __iomem *port_mmio = mv_ap_base(ap); + int fix_phy_mode4 = + hp_flags & (MV_HP_ERRATA_60X1A1 | MV_HP_ERRATA_60X1B0); + u32 m2; + + if (fix_phy_mode4) { + u32 tmp, m4; + + m4 = readl(port_mmio + PHY_MODE4); + tmp = readl(port_mmio + 0x310); + + m4 = (m4 & ~(1 << 1)) | (1 << 0); + + writel(m4, port_mmio + PHY_MODE4); + writel(tmp, port_mmio + 0x310); + } + + /* Revert values of pre-emphasis and signal amps to the saved ones */ + m2 = readl(port_mmio + PHY_MODE2); + + m2 &= ~MV_M2_PREAMP_MASK; + m2 |= hpriv->signal[ap->port_no].amps; + m2 |= hpriv->signal[ap->port_no].pre; + + writel(m2, port_mmio + PHY_MODE2); +} + +static void mv_phy_errata(struct ata_port *ap) +{ + struct mv_host_priv *hpriv = ap->host_set->private_data; + + if (IS_50XX(hpriv)) + mv_phy_errata5(ap); + else + mv_phy_errata6(ap); +} + /** * mv_phy_reset - Perform eDMA reset followed by COMRESET * @ap: ATA channel to manipulate @@ -1220,6 +1303,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, static void mv_phy_reset(struct ata_port *ap) { struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host_set->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; @@ -1230,6 +1314,13 @@ static void mv_phy_reset(struct ata_port *ap) mv_stop_dma(ap); writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); + + if (IS_60XX(hpriv)) { + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); + ifctl |= (1 << 12) | (1 << 7); + writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); + } + udelay(25); /* allow reset propagation */ /* Spec never mentions clearing the bit. Marvell's driver does @@ -1237,6 +1328,8 @@ static void mv_phy_reset(struct ata_port *ap) */ writelfl(0, port_mmio + EDMA_CMD_OFS); + mv_phy_errata(ap); + DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); @@ -1283,7 +1376,7 @@ static void mv_phy_reset(struct ata_port *ap) pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - printk("EXIT\n"); + VPRINTK("EXIT\n"); } /** @@ -1380,8 +1473,152 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +static void mv_enable_leds5(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + /* FIXME */ +} + +static void mv_enable_leds6(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) + writel(0x00020060, mmio + MV_GPIO_PORT_CTL); + + else if (hpriv->hp_flags & MV_HP_ERRATA_60X1B0) + writel(0x00000060, mmio + MV_GPIO_PORT_CTL); +} + +static void mv_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + if (IS_50XX(hpriv)) + mv_enable_leds5(hpriv, mmio); + else + mv_enable_leds6(hpriv, mmio); +} + +static void mv_cfg_signal5(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + /* FIXME */ +} + +static void mv_cfg_signal6(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *port_mmio; + u32 tmp; + + if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) { + hpriv->signal[idx].amps = 0x5 << 8; + hpriv->signal[idx].pre = 0x3 << 5; + return; + } + + assert (hpriv->hp_flags & MV_HP_ERRATA_60X1B0); + + tmp = readl(mmio + MV_RESET_CFG); + if ((tmp & (1 << 0)) == 0) { + hpriv->signal[idx].amps = 0x4 << 8; + hpriv->signal[idx].pre = 0x1 << 5; + return; + } + + port_mmio = mv_port_base(mmio, idx); + tmp = readl(port_mmio + PHY_MODE2); + + hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ + hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ +} + +static int mv_cfg_errata(struct pci_dev *pdev, struct mv_host_priv *hpriv, + unsigned int board_idx) +{ + u8 rev_id; + u32 hp_flags = hpriv->hp_flags; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + switch(board_idx) { + case chip_504x: + case chip_508x: + hp_flags |= MV_HP_50XX; + + if (pdev->device == 0x5080) { + switch (rev_id) { + case 0x0: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B0 workarounds to unknown rev 0\n"); + /* fall through */ + case 0x1: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x2: + hp_flags |= MV_HP_ERRATA_50XXB1; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B2 workarounds to future rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + } else { + switch (rev_id) { + case 0x0: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x1: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B1 workarounds to unknown rev 1\n"); + /* fall through */ + case 0x2: + hp_flags |= MV_HP_ERRATA_50XXB1; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B2 workarounds to future rev\n"); + /* fall through */ + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + } + break; + + case chip_604x: + case chip_608x: + switch (rev_id) { + case 0x0: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying A1 workarounds to unknown rev 0\n"); + /* fall through */ + case 0x1: + hp_flags |= MV_HP_ERRATA_60X1A1; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B0 workarounds to future rev\n"); + /* fall through */ + case 0x2: + hp_flags |= MV_HP_ERRATA_60X1B0; + break; + } + break; + + default: + printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx); + return 1; + } + + hpriv->hp_flags = hp_flags; + + return 0; +} + /** * mv_host_init - Perform some early initialization of the host. + * @pdev: host PCI device * @probe_ent: early data struct representing the host * * If possible, do an early global reset of the host. Then do @@ -1390,11 +1627,28 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) * LOCKING: * Inherited from caller. */ -static int mv_host_init(struct ata_probe_ent *probe_ent) +static int mv_host_init(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, + unsigned int board_idx) { int rc = 0, n_hc, port, hc; void __iomem *mmio = probe_ent->mmio_base; void __iomem *port_mmio; + struct mv_host_priv *hpriv = probe_ent->private_data; + + rc = mv_cfg_errata(pdev, hpriv, board_idx); + if (rc) + goto done; + + n_hc = mv_get_hc_count(probe_ent->host_flags); + probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; + + if (IS_50XX(hpriv)) { + for (port = 0; port < probe_ent->n_ports; port++) + mv_cfg_signal5(hpriv, port, mmio); + } else { + for (port = 0; port < probe_ent->n_ports; port++) + mv_cfg_signal6(hpriv, port, mmio); + } if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && mv_global_soft_reset(probe_ent->mmio_base)) { @@ -1402,8 +1656,7 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) goto done; } - n_hc = mv_get_hc_count(probe_ent->host_flags); - probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; + mv_enable_leds(hpriv, mmio); for (port = 0; port < probe_ent->n_ports; port++) { port_mmio = mv_port_base(mmio, port); @@ -1435,6 +1688,7 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), readl(mmio + PCI_IRQ_MASK_OFS)); + done: return rc; } @@ -1540,7 +1794,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->private_data = hpriv; /* initialize adapter */ - rc = mv_host_init(probe_ent); + rc = mv_host_init(pdev, probe_ent, board_idx); if (rc) { goto err_out_hpriv; } From ba3fe8fb6a469390a14379519915f3c39a973d99 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 19:08:48 -0500 Subject: [PATCH 005/169] [libata sata_mv] move code around No content change, just prepping up future mv_hw_ops modularization. --- drivers/scsi/sata_mv.c | 96 +++++++++++++++++++++--------------------- 1 file changed, 48 insertions(+), 48 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index b1696e353dd4..9d116d00273d 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1243,11 +1243,59 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +static void mv_cfg_signal5(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + /* FIXME */ +} + +static void mv_enable_leds5(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + /* FIXME */ +} + static void mv_phy_errata5(struct ata_port *ap) { /* FIXME */ } +static void mv_cfg_signal6(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *port_mmio; + u32 tmp; + + if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) { + hpriv->signal[idx].amps = 0x5 << 8; + hpriv->signal[idx].pre = 0x3 << 5; + return; + } + + assert (hpriv->hp_flags & MV_HP_ERRATA_60X1B0); + + tmp = readl(mmio + MV_RESET_CFG); + if ((tmp & (1 << 0)) == 0) { + hpriv->signal[idx].amps = 0x4 << 8; + hpriv->signal[idx].pre = 0x1 << 5; + return; + } + + port_mmio = mv_port_base(mmio, idx); + tmp = readl(port_mmio + PHY_MODE2); + + hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ + hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ +} + +static void mv_enable_leds6(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) + writel(0x00020060, mmio + MV_GPIO_PORT_CTL); + + else if (hpriv->hp_flags & MV_HP_ERRATA_60X1B0) + writel(0x00000060, mmio + MV_GPIO_PORT_CTL); +} + static void mv_phy_errata6(struct ata_port *ap) { struct mv_host_priv *hpriv = ap->host_set->private_data; @@ -1473,20 +1521,6 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } -static void mv_enable_leds5(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - /* FIXME */ -} - -static void mv_enable_leds6(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) - writel(0x00020060, mmio + MV_GPIO_PORT_CTL); - - else if (hpriv->hp_flags & MV_HP_ERRATA_60X1B0) - writel(0x00000060, mmio + MV_GPIO_PORT_CTL); -} - static void mv_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) { if (IS_50XX(hpriv)) @@ -1495,40 +1529,6 @@ static void mv_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) mv_enable_leds6(hpriv, mmio); } -static void mv_cfg_signal5(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio) -{ - /* FIXME */ -} - -static void mv_cfg_signal6(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio) -{ - void __iomem *port_mmio; - u32 tmp; - - if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) { - hpriv->signal[idx].amps = 0x5 << 8; - hpriv->signal[idx].pre = 0x3 << 5; - return; - } - - assert (hpriv->hp_flags & MV_HP_ERRATA_60X1B0); - - tmp = readl(mmio + MV_RESET_CFG); - if ((tmp & (1 << 0)) == 0) { - hpriv->signal[idx].amps = 0x4 << 8; - hpriv->signal[idx].pre = 0x1 << 5; - return; - } - - port_mmio = mv_port_base(mmio, idx); - tmp = readl(port_mmio + PHY_MODE2); - - hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ - hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ -} - static int mv_cfg_errata(struct pci_dev *pdev, struct mv_host_priv *hpriv, unsigned int board_idx) { From 47c2b677daeed9c79ecb7167c211ff36876ea611 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 21:13:17 -0500 Subject: [PATCH 006/169] [libata sata_mv] mv_hw_ops for hardware families; new errata - eliminate a bunch of redundant tests by creating a per-chip-family set of hooks, mv_hw_ops - implement more errata, from newer Marvell GPL'd driver --- drivers/scsi/sata_mv.c | 296 ++++++++++++++++++++++------------------- 1 file changed, 158 insertions(+), 138 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 9d116d00273d..4ca4b35d0022 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -83,16 +83,15 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | - MV_FLAG_GLBL_SFT_RST), + MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, chip_504x = 0, chip_508x = 1, - chip_604x = 2, - chip_608x = 3, + chip_5080 = 2, + chip_604x = 3, + chip_608x = 4, CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, @@ -150,6 +149,7 @@ enum { /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ SATA_ACTIVE_OFS = 0x350, + PHY_MODE3 = 0x310, PHY_MODE4 = 0x314, PHY_MODE2 = 0x330, SATA_INTERFACE_CTL = 0x050, @@ -209,23 +209,20 @@ enum { ATA_RST = (1 << 2), EDMA_ARB_CFG = 0x38, - EDMA_NO_SNOOP = (1 << 6), /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), - MV_HP_ERRATA_60X1A1 = (1 << 1), - MV_HP_ERRATA_60X1B0 = (1 << 2), - MV_HP_ERRATA_50XXB0 = (1 << 3), - MV_HP_ERRATA_50XXB1 = (1 << 4), - MV_HP_ERRATA_50XXB2 = (1 << 5), - MV_HP_50XX = (1 << 6), + MV_HP_ERRATA_50XXB0 = (1 << 1), + MV_HP_ERRATA_50XXB2 = (1 << 2), + MV_HP_ERRATA_60X1B2 = (1 << 3), + MV_HP_ERRATA_60X1C0 = (1 << 4), + MV_HP_50XX = (1 << 5), /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; -#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) #define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) enum { @@ -280,9 +277,19 @@ struct mv_port_signal { u32 pre; }; +struct mv_host_priv; +struct mv_hw_ops { + void (*phy_errata)(struct ata_port *ap); + void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*read_preamp)(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); + int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio); +}; + struct mv_host_priv { u32 hp_flags; struct mv_port_signal signal[8]; + const struct mv_hw_ops *ops; }; static void mv_irq_clear(struct ata_port *ap); @@ -299,6 +306,18 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static void mv5_phy_errata(struct ata_port *ap); +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio); + +static void mv6_phy_errata(struct ata_port *ap); +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio); + static struct scsi_host_template mv_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -361,6 +380,13 @@ static struct ata_port_info mv_port_info[] = { .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, + { /* chip_5080 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ + .port_ops = &mv_ops, + }, { /* chip_604x */ .sht = &mv_sht, .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), @@ -382,7 +408,7 @@ static const struct pci_device_id mv_pci_tbl[] = { #if 0 /* unusably broken right now */ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_508x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, #endif @@ -402,6 +428,20 @@ static struct pci_driver mv_pci_driver = { .remove = ata_pci_remove_one, }; +static const struct mv_hw_ops mv5xxx_ops = { + .phy_errata = mv5_phy_errata, + .enable_leds = mv5_enable_leds, + .read_preamp = mv5_read_preamp, + .reset_hc = mv5_reset_hc, +}; + +static const struct mv_hw_ops mv6xxx_ops = { + .phy_errata = mv6_phy_errata, + .enable_leds = mv6_enable_leds, + .read_preamp = mv6_read_preamp, + .reset_hc = mv6_reset_hc, +}; + /* * Functions */ @@ -624,9 +664,9 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) * LOCKING: * Inherited from caller. */ -static int mv_global_soft_reset(void __iomem *mmio_base) +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio) { - void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; + void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; int i, rc = 0; u32 t; @@ -721,7 +761,6 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) static int mv_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; - struct mv_host_priv *hpriv = ap->host_set->private_data; struct mv_port_priv *pp; void __iomem *port_mmio = mv_ap_base(ap); void *mem; @@ -779,15 +818,6 @@ static int mv_port_start(struct ata_port *ap) writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) { - u32 new_tmp, tmp; - - new_tmp = tmp = readl(port_mmio + EDMA_ARB_CFG); - new_tmp &= ~EDMA_NO_SNOOP; - if (new_tmp != tmp) - writel(new_tmp, port_mmio + EDMA_ARB_CFG); - } - pp->req_producer = pp->rsp_consumer = 0; /* Don't turn on EDMA here...do it before DMA commands only. Else @@ -1243,39 +1273,37 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } -static void mv_cfg_signal5(struct mv_host_priv *hpriv, int idx, +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio) { /* FIXME */ } -static void mv_enable_leds5(struct mv_host_priv *hpriv, void __iomem *mmio) +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) { /* FIXME */ } -static void mv_phy_errata5(struct ata_port *ap) +static void mv5_phy_errata(struct ata_port *ap) { /* FIXME */ } -static void mv_cfg_signal6(struct mv_host_priv *hpriv, int idx, +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + /* FIXME */ + return 1; +} + +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio) { void __iomem *port_mmio; u32 tmp; - if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) { - hpriv->signal[idx].amps = 0x5 << 8; - hpriv->signal[idx].pre = 0x3 << 5; - return; - } - - assert (hpriv->hp_flags & MV_HP_ERRATA_60X1B0); - tmp = readl(mmio + MV_RESET_CFG); if ((tmp & (1 << 0)) == 0) { - hpriv->signal[idx].amps = 0x4 << 8; + hpriv->signal[idx].amps = 0x7 << 8; hpriv->signal[idx].pre = 0x1 << 5; return; } @@ -1287,34 +1315,57 @@ static void mv_cfg_signal6(struct mv_host_priv *hpriv, int idx, hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ } -static void mv_enable_leds6(struct mv_host_priv *hpriv, void __iomem *mmio) +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) { - if (hpriv->hp_flags & MV_HP_ERRATA_60X1A1) - writel(0x00020060, mmio + MV_GPIO_PORT_CTL); - - else if (hpriv->hp_flags & MV_HP_ERRATA_60X1B0) - writel(0x00000060, mmio + MV_GPIO_PORT_CTL); + writel(0x00000060, mmio + MV_GPIO_PORT_CTL); } -static void mv_phy_errata6(struct ata_port *ap) +static void mv6_phy_errata(struct ata_port *ap) { struct mv_host_priv *hpriv = ap->host_set->private_data; u32 hp_flags = hpriv->hp_flags; void __iomem *port_mmio = mv_ap_base(ap); + int fix_phy_mode2 = + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); int fix_phy_mode4 = - hp_flags & (MV_HP_ERRATA_60X1A1 | MV_HP_ERRATA_60X1B0); - u32 m2; + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); + u32 m2, tmp; + + if (fix_phy_mode2) { + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~(1 << 16); + m2 |= (1 << 31); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~((1 << 16) | (1 << 31)); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + } + + /* who knows what this magic does */ + tmp = readl(port_mmio + PHY_MODE3); + tmp &= ~0x7F800000; + tmp |= 0x2A800000; + writel(tmp, port_mmio + PHY_MODE3); if (fix_phy_mode4) { - u32 tmp, m4; + u32 m4; m4 = readl(port_mmio + PHY_MODE4); - tmp = readl(port_mmio + 0x310); + + if (hp_flags & MV_HP_ERRATA_60X1B2) + tmp = readl(port_mmio + 0x310); m4 = (m4 & ~(1 << 1)) | (1 << 0); writel(m4, port_mmio + PHY_MODE4); - writel(tmp, port_mmio + 0x310); + + if (hp_flags & MV_HP_ERRATA_60X1B2) + writel(tmp, port_mmio + 0x310); } /* Revert values of pre-emphasis and signal amps to the saved ones */ @@ -1323,20 +1374,11 @@ static void mv_phy_errata6(struct ata_port *ap) m2 &= ~MV_M2_PREAMP_MASK; m2 |= hpriv->signal[ap->port_no].amps; m2 |= hpriv->signal[ap->port_no].pre; + m2 &= ~(1 << 16); writel(m2, port_mmio + PHY_MODE2); } -static void mv_phy_errata(struct ata_port *ap) -{ - struct mv_host_priv *hpriv = ap->host_set->private_data; - - if (IS_50XX(hpriv)) - mv_phy_errata5(ap); - else - mv_phy_errata6(ap); -} - /** * mv_phy_reset - Perform eDMA reset followed by COMRESET * @ap: ATA channel to manipulate @@ -1376,7 +1418,7 @@ static void mv_phy_reset(struct ata_port *ap) */ writelfl(0, port_mmio + EDMA_CMD_OFS); - mv_phy_errata(ap); + hpriv->ops->phy_errata(ap); DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), @@ -1521,15 +1563,7 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } -static void mv_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - if (IS_50XX(hpriv)) - mv_enable_leds5(hpriv, mmio); - else - mv_enable_leds6(hpriv, mmio); -} - -static int mv_cfg_errata(struct pci_dev *pdev, struct mv_host_priv *hpriv, +static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, unsigned int board_idx) { u8 rev_id; @@ -1538,70 +1572,60 @@ static int mv_cfg_errata(struct pci_dev *pdev, struct mv_host_priv *hpriv, pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); switch(board_idx) { + case chip_5080: + hpriv->ops = &mv5xxx_ops; + hp_flags |= MV_HP_50XX; + + switch (rev_id) { + case 0x1: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying 50XXB2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + break; + case chip_504x: case chip_508x: + hpriv->ops = &mv5xxx_ops; hp_flags |= MV_HP_50XX; - if (pdev->device == 0x5080) { - switch (rev_id) { - case 0x0: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B0 workarounds to unknown rev 0\n"); - /* fall through */ - case 0x1: - hp_flags |= MV_HP_ERRATA_50XXB0; - break; - case 0x2: - hp_flags |= MV_HP_ERRATA_50XXB1; - break; - case 0x3: - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B2 workarounds to future rev\n"); - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - } - } else { - switch (rev_id) { - case 0x0: - hp_flags |= MV_HP_ERRATA_50XXB0; - break; - case 0x1: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B1 workarounds to unknown rev 1\n"); - /* fall through */ - case 0x2: - hp_flags |= MV_HP_ERRATA_50XXB1; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B2 workarounds to future rev\n"); - /* fall through */ - case 0x3: - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - } + switch (rev_id) { + case 0x0: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; } break; case chip_604x: case chip_608x: + hpriv->ops = &mv6xxx_ops; + switch (rev_id) { - case 0x0: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying A1 workarounds to unknown rev 0\n"); - /* fall through */ - case 0x1: - hp_flags |= MV_HP_ERRATA_60X1A1; + case 0x7: + hp_flags |= MV_HP_ERRATA_60X1B2; + break; + case 0x9: + hp_flags |= MV_HP_ERRATA_60X1C0; break; default: dev_printk(KERN_WARNING, &pdev->dev, - "Applying B0 workarounds to future rev\n"); - /* fall through */ - case 0x2: - hp_flags |= MV_HP_ERRATA_60X1B0; + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1B2; break; } break; @@ -1617,7 +1641,7 @@ static int mv_cfg_errata(struct pci_dev *pdev, struct mv_host_priv *hpriv, } /** - * mv_host_init - Perform some early initialization of the host. + * mv_init_host - Perform some early initialization of the host. * @pdev: host PCI device * @probe_ent: early data struct representing the host * @@ -1627,7 +1651,7 @@ static int mv_cfg_errata(struct pci_dev *pdev, struct mv_host_priv *hpriv, * LOCKING: * Inherited from caller. */ -static int mv_host_init(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, +static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, unsigned int board_idx) { int rc = 0, n_hc, port, hc; @@ -1635,28 +1659,24 @@ static int mv_host_init(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, void __iomem *port_mmio; struct mv_host_priv *hpriv = probe_ent->private_data; - rc = mv_cfg_errata(pdev, hpriv, board_idx); + /* global interrupt mask */ + writel(0, mmio + HC_MAIN_IRQ_MASK_OFS); + + rc = mv_chip_id(pdev, hpriv, board_idx); if (rc) goto done; n_hc = mv_get_hc_count(probe_ent->host_flags); probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; - if (IS_50XX(hpriv)) { - for (port = 0; port < probe_ent->n_ports; port++) - mv_cfg_signal5(hpriv, port, mmio); - } else { - for (port = 0; port < probe_ent->n_ports; port++) - mv_cfg_signal6(hpriv, port, mmio); - } + for (port = 0; port < probe_ent->n_ports; port++) + hpriv->ops->read_preamp(hpriv, port, mmio); - if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && - mv_global_soft_reset(probe_ent->mmio_base)) { - rc = 1; + rc = hpriv->ops->reset_hc(hpriv, mmio); + if (rc) goto done; - } - mv_enable_leds(hpriv, mmio); + hpriv->ops->enable_leds(hpriv, mmio); for (port = 0; port < probe_ent->n_ports; port++) { port_mmio = mv_port_base(mmio, port); @@ -1794,7 +1814,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->private_data = hpriv; /* initialize adapter */ - rc = mv_host_init(pdev, probe_ent, board_idx); + rc = mv_init_host(pdev, probe_ent, board_idx); if (rc) { goto err_out_hpriv; } From 522479fb98c6667f081e75f87e298e413c0b1db8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 22:14:02 -0500 Subject: [PATCH 007/169] [libata sata_mv] hardware initialization work Implement flash reset and PCI reset on 50xx and 60xx. Implement LED enable on 50xx. --- drivers/scsi/sata_mv.c | 117 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 105 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 4ca4b35d0022..180baa532068 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -50,6 +50,7 @@ enum { MV_PCI_REG_BASE = 0, MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ MV_SATAHC0_REG_BASE = 0x20000, + MV_FLASH_CTL = 0x1046c, MV_GPIO_PORT_CTL = 0x104f0, MV_RESET_CFG = 0x180d8, @@ -87,12 +88,6 @@ enum { ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, - chip_504x = 0, - chip_508x = 1, - chip_5080 = 2, - chip_604x = 3, - chip_608x = 4, - CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, CRQB_CMD_ADDR_SHIFT = 8, @@ -112,8 +107,19 @@ enum { PCI_MASTER_EMPTY = (1 << 3), GLOB_SFT_RST = (1 << 4), - PCI_IRQ_CAUSE_OFS = 0x1d58, - PCI_IRQ_MASK_OFS = 0x1d5c, + MV_PCI_MODE = 0xd00, + MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, + MV_PCI_DISC_TIMER = 0xd04, + MV_PCI_MSI_TRIGGER = 0xc38, + MV_PCI_SERR_MASK = 0xc28, + MV_PCI_XBAR_TMOUT = 0x1d04, + MV_PCI_ERR_LOW_ADDRESS = 0x1d40, + MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, + MV_PCI_ERR_ATTRIBUTE = 0x1d48, + MV_PCI_ERR_COMMAND = 0x1d50, + + PCI_IRQ_CAUSE_OFS = 0x1d58, + PCI_IRQ_MASK_OFS = 0x1d5c, PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, @@ -236,6 +242,14 @@ enum { EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, }; +enum chip_type { + chip_504x, + chip_508x, + chip_5080, + chip_604x, + chip_608x, +}; + /* Command ReQuest Block: 32B */ struct mv_crqb { u32 sg_addr; @@ -284,6 +298,8 @@ struct mv_hw_ops { void (*read_preamp)(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio); }; struct mv_host_priv { @@ -311,12 +327,16 @@ static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); static void mv6_phy_errata(struct ata_port *ap); static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); static struct scsi_host_template mv_sht = { .module = THIS_MODULE, @@ -433,6 +453,8 @@ static const struct mv_hw_ops mv5xxx_ops = { .enable_leds = mv5_enable_leds, .read_preamp = mv5_read_preamp, .reset_hc = mv5_reset_hc, + .reset_flash = mv5_reset_flash, + .reset_bus = mv5_reset_bus, }; static const struct mv_hw_ops mv6xxx_ops = { @@ -440,6 +462,8 @@ static const struct mv_hw_ops mv6xxx_ops = { .enable_leds = mv6_enable_leds, .read_preamp = mv6_read_preamp, .reset_hc = mv6_reset_hc, + .reset_flash = mv6_reset_flash, + .reset_bus = mv_reset_pci_bus, }; /* @@ -655,9 +679,45 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } +#undef ZERO +#define ZERO(reg) writel(0, mmio + (reg)) +static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) +{ + u32 tmp; + + tmp = readl(mmio + MV_PCI_MODE); + tmp &= 0xff00ffff; + writel(tmp, mmio + MV_PCI_MODE); + + ZERO(MV_PCI_DISC_TIMER); + ZERO(MV_PCI_MSI_TRIGGER); + writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); + ZERO(HC_MAIN_IRQ_MASK_OFS); + ZERO(MV_PCI_SERR_MASK); + ZERO(PCI_IRQ_CAUSE_OFS); + ZERO(PCI_IRQ_MASK_OFS); + ZERO(MV_PCI_ERR_LOW_ADDRESS); + ZERO(MV_PCI_ERR_HIGH_ADDRESS); + ZERO(MV_PCI_ERR_ATTRIBUTE); + ZERO(MV_PCI_ERR_COMMAND); +} +#undef ZERO + +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + mv5_reset_flash(hpriv, mmio); + + tmp = readl(mmio + MV_GPIO_PORT_CTL); + tmp &= 0x3; + tmp |= (1 << 5) | (1 << 6); + writel(tmp, mmio + MV_GPIO_PORT_CTL); +} + /** - * mv_global_soft_reset - Perform the 6xxx global soft reset - * @mmio_base: base address of the HBA + * mv6_reset_hc - Perform the 6xxx global soft reset + * @mmio: base address of the HBA * * This routine only applies to 6xxx parts. * @@ -1273,6 +1333,29 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) +{ + u8 rev_id; + int early_5080; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + early_5080 = (pdev->device == 0x5080) && (rev_id == 0); + + if (!early_5080) { + u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= (1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); + } + + mv_reset_pci_bus(pdev, mmio); +} + +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + writel(0x0fcfffff, mmio + MV_FLASH_CTL); +} + static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio) { @@ -1281,7 +1364,15 @@ static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) { - /* FIXME */ + u32 tmp; + + writel(0, mmio + MV_GPIO_PORT_CTL); + + /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ + + tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= ~(1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); } static void mv5_phy_errata(struct ata_port *ap) @@ -1564,7 +1655,7 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) } static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, - unsigned int board_idx) + unsigned int board_idx) { u8 rev_id; u32 hp_flags = hpriv->hp_flags; @@ -1676,6 +1767,8 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, if (rc) goto done; + hpriv->ops->reset_flash(hpriv, mmio); + hpriv->ops->reset_bus(pdev, mmio); hpriv->ops->enable_leds(hpriv, mmio); for (port = 0; port < probe_ent->n_ports; port++) { From 101ffae26c23ea928fce6d31a8b4901327d91a15 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 22:17:49 -0500 Subject: [PATCH 008/169] [libata sata_mv] move code around No content changes. Move 60xx code to be closer to other 60xx code. --- drivers/scsi/sata_mv.c | 200 ++++++++++++++++++++--------------------- 1 file changed, 100 insertions(+), 100 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 180baa532068..f695d0bbb5cc 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -679,106 +679,6 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -#undef ZERO -#define ZERO(reg) writel(0, mmio + (reg)) -static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) -{ - u32 tmp; - - tmp = readl(mmio + MV_PCI_MODE); - tmp &= 0xff00ffff; - writel(tmp, mmio + MV_PCI_MODE); - - ZERO(MV_PCI_DISC_TIMER); - ZERO(MV_PCI_MSI_TRIGGER); - writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); - ZERO(HC_MAIN_IRQ_MASK_OFS); - ZERO(MV_PCI_SERR_MASK); - ZERO(PCI_IRQ_CAUSE_OFS); - ZERO(PCI_IRQ_MASK_OFS); - ZERO(MV_PCI_ERR_LOW_ADDRESS); - ZERO(MV_PCI_ERR_HIGH_ADDRESS); - ZERO(MV_PCI_ERR_ATTRIBUTE); - ZERO(MV_PCI_ERR_COMMAND); -} -#undef ZERO - -static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - u32 tmp; - - mv5_reset_flash(hpriv, mmio); - - tmp = readl(mmio + MV_GPIO_PORT_CTL); - tmp &= 0x3; - tmp |= (1 << 5) | (1 << 6); - writel(tmp, mmio + MV_GPIO_PORT_CTL); -} - -/** - * mv6_reset_hc - Perform the 6xxx global soft reset - * @mmio: base address of the HBA - * - * This routine only applies to 6xxx parts. - * - * LOCKING: - * Inherited from caller. - */ -static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; - int i, rc = 0; - u32 t; - - /* Following procedure defined in PCI "main command and status - * register" table. - */ - t = readl(reg); - writel(t | STOP_PCI_MASTER, reg); - - for (i = 0; i < 1000; i++) { - udelay(1); - t = readl(reg); - if (PCI_MASTER_EMPTY & t) { - break; - } - } - if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); - rc = 1; - goto done; - } - - /* set reset */ - i = 5; - do { - writel(t | GLOB_SFT_RST, reg); - t = readl(reg); - udelay(1); - } while (!(GLOB_SFT_RST & t) && (i-- > 0)); - - if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME ": can't set global reset\n"); - rc = 1; - goto done; - } - - /* clear reset and *reenable the PCI master* (not mentioned in spec) */ - i = 5; - do { - writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); - t = readl(reg); - udelay(1); - } while ((GLOB_SFT_RST & t) && (i-- > 0)); - - if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); - rc = 1; - } -done: - return rc; -} - /** * mv_host_stop - Host specific cleanup/stop routine. * @host_set: host data structure @@ -1386,6 +1286,106 @@ static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio) return 1; } +#undef ZERO +#define ZERO(reg) writel(0, mmio + (reg)) +static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) +{ + u32 tmp; + + tmp = readl(mmio + MV_PCI_MODE); + tmp &= 0xff00ffff; + writel(tmp, mmio + MV_PCI_MODE); + + ZERO(MV_PCI_DISC_TIMER); + ZERO(MV_PCI_MSI_TRIGGER); + writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); + ZERO(HC_MAIN_IRQ_MASK_OFS); + ZERO(MV_PCI_SERR_MASK); + ZERO(PCI_IRQ_CAUSE_OFS); + ZERO(PCI_IRQ_MASK_OFS); + ZERO(MV_PCI_ERR_LOW_ADDRESS); + ZERO(MV_PCI_ERR_HIGH_ADDRESS); + ZERO(MV_PCI_ERR_ATTRIBUTE); + ZERO(MV_PCI_ERR_COMMAND); +} +#undef ZERO + +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + mv5_reset_flash(hpriv, mmio); + + tmp = readl(mmio + MV_GPIO_PORT_CTL); + tmp &= 0x3; + tmp |= (1 << 5) | (1 << 6); + writel(tmp, mmio + MV_GPIO_PORT_CTL); +} + +/** + * mv6_reset_hc - Perform the 6xxx global soft reset + * @mmio: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; + int i, rc = 0; + u32 t; + + /* Following procedure defined in PCI "main command and status + * register" table. + */ + t = readl(reg); + writel(t | STOP_PCI_MASTER, reg); + + for (i = 0; i < 1000; i++) { + udelay(1); + t = readl(reg); + if (PCI_MASTER_EMPTY & t) { + break; + } + } + if (!(PCI_MASTER_EMPTY & t)) { + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; + goto done; + } + + /* set reset */ + i = 5; + do { + writel(t | GLOB_SFT_RST, reg); + t = readl(reg); + udelay(1); + } while (!(GLOB_SFT_RST & t) && (i-- > 0)); + + if (!(GLOB_SFT_RST & t)) { + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; + goto done; + } + + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ + i = 5; + do { + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); + t = readl(reg); + udelay(1); + } while ((GLOB_SFT_RST & t) && (i-- > 0)); + + if (GLOB_SFT_RST & t) { + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; + } +done: + return rc; +} + static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio) { From 2a47ce06d534692f9bd2bf4e90a20fc9b1054c39 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Nov 2005 23:05:14 -0500 Subject: [PATCH 009/169] [libata sata_mv] call phy fixups during init, as well as phy reset --- drivers/scsi/sata_mv.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index f695d0bbb5cc..5defd056fe1c 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -293,7 +293,8 @@ struct mv_port_signal { struct mv_host_priv; struct mv_hw_ops { - void (*phy_errata)(struct ata_port *ap); + void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); void (*read_preamp)(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); @@ -322,7 +323,8 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); -static void mv5_phy_errata(struct ata_port *ap); +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); @@ -330,7 +332,8 @@ static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); -static void mv6_phy_errata(struct ata_port *ap); +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); @@ -1275,7 +1278,8 @@ static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); } -static void mv5_phy_errata(struct ata_port *ap) +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) { /* FIXME */ } @@ -1411,11 +1415,10 @@ static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) writel(0x00000060, mmio + MV_GPIO_PORT_CTL); } -static void mv6_phy_errata(struct ata_port *ap) +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *port_mmio, + unsigned int port) { - struct mv_host_priv *hpriv = ap->host_set->private_data; u32 hp_flags = hpriv->hp_flags; - void __iomem *port_mmio = mv_ap_base(ap); int fix_phy_mode2 = hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); int fix_phy_mode4 = @@ -1463,8 +1466,8 @@ static void mv6_phy_errata(struct ata_port *ap) m2 = readl(port_mmio + PHY_MODE2); m2 &= ~MV_M2_PREAMP_MASK; - m2 |= hpriv->signal[ap->port_no].amps; - m2 |= hpriv->signal[ap->port_no].pre; + m2 |= hpriv->signal[port].amps; + m2 |= hpriv->signal[port].pre; m2 &= ~(1 << 16); writel(m2, port_mmio + PHY_MODE2); @@ -1509,7 +1512,7 @@ static void mv_phy_reset(struct ata_port *ap) */ writelfl(0, port_mmio + EDMA_CMD_OFS); - hpriv->ops->phy_errata(ap); + hpriv->ops->phy_errata(hpriv, port_mmio, ap->port_no); DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), @@ -1747,7 +1750,6 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, { int rc = 0, n_hc, port, hc; void __iomem *mmio = probe_ent->mmio_base; - void __iomem *port_mmio; struct mv_host_priv *hpriv = probe_ent->private_data; /* global interrupt mask */ @@ -1772,7 +1774,19 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, hpriv->ops->enable_leds(hpriv, mmio); for (port = 0; port < probe_ent->n_ports; port++) { - port_mmio = mv_port_base(mmio, port); + void __iomem *port_mmio = mv_port_base(mmio, port); + + if (IS_60XX(hpriv)) { + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); + ifctl |= (1 << 12); + writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); + } + + hpriv->ops->phy_errata(hpriv, port_mmio, port); + } + + for (port = 0; port < probe_ent->n_ports; port++) { + void __iomem *port_mmio = mv_port_base(mmio, port); mv_port_init(&probe_ent->port[port], port_mmio); } From c9d39130123238ac18478a42e25cb7996eacfcc0 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 13 Nov 2005 17:47:51 -0500 Subject: [PATCH 010/169] [libata sata_mv] fix tons of 50XX bugs --- drivers/scsi/sata_mv.c | 301 ++++++++++++++++++++++++++++++++++------- 1 file changed, 252 insertions(+), 49 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 5defd056fe1c..722ab537b7a6 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -158,6 +158,9 @@ enum { PHY_MODE3 = 0x310, PHY_MODE4 = 0x314, PHY_MODE2 = 0x330, + MV5_PHY_MODE = 0x74, + MV5_LT_MODE = 0x30, + MV5_PHY_CTL = 0x0C, SATA_INTERFACE_CTL = 0x050, MV_M2_PREAMP_MASK = 0x7e0, @@ -214,6 +217,7 @@ enum { EDMA_DS = (1 << 1), ATA_RST = (1 << 2), + EDMA_IORDY_TMOUT = 0x34, EDMA_ARB_CFG = 0x38, /* Host private flags (hp_flags) */ @@ -229,6 +233,7 @@ enum { MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; +#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) #define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) enum { @@ -298,7 +303,8 @@ struct mv_hw_ops { void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); void (*read_preamp)(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); - int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio); + int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio); }; @@ -312,6 +318,8 @@ struct mv_host_priv { static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); +static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static void mv_phy_reset(struct ata_port *ap); static void mv_host_stop(struct ata_host_set *host_set); static int mv_port_start(struct ata_port *ap); @@ -328,7 +336,8 @@ static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); -static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio); +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); @@ -337,9 +346,13 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio); -static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio); +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); +static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no); +static void mv_stop_and_reset(struct ata_port *ap); static struct scsi_host_template mv_sht = { .module = THIS_MODULE, @@ -361,7 +374,34 @@ static struct scsi_host_template mv_sht = { .ordered_flush = 1, }; -static const struct ata_port_operations mv_ops = { +static const struct ata_port_operations mv5_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, + + .eng_timeout = mv_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv5_scr_read, + .scr_write = mv5_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, +}; + +static const struct ata_port_operations mv6_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, @@ -393,29 +433,29 @@ static struct ata_port_info mv_port_info[] = { .sht = &mv_sht, .host_flags = MV_COMMON_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ - .port_ops = &mv_ops, + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, }, { /* chip_508x */ .sht = &mv_sht, .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ - .port_ops = &mv_ops, + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, }, { /* chip_5080 */ .sht = &mv_sht, .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ - .port_ops = &mv_ops, + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, }, { /* chip_604x */ .sht = &mv_sht, .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_ops, + .port_ops = &mv6_ops, }, { /* chip_608x */ .sht = &mv_sht, @@ -423,17 +463,15 @@ static struct ata_port_info mv_port_info[] = { MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_ops, + .port_ops = &mv6_ops, }, }; static const struct pci_device_id mv_pci_tbl[] = { -#if 0 /* unusably broken right now */ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, -#endif {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, @@ -484,11 +522,27 @@ static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); } +static inline unsigned int mv_hc_from_port(unsigned int port) +{ + return port >> MV_PORT_HC_SHIFT; +} + +static inline unsigned int mv_hardport_from_port(unsigned int port) +{ + return port & MV_PORT_MASK; +} + +static inline void __iomem *mv_hc_base_from_port(void __iomem *base, + unsigned int port) +{ + return mv_hc_base(base, mv_hc_from_port(port)); +} + static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) { - return (mv_hc_base(base, port >> MV_PORT_HC_SHIFT) + + return mv_hc_base_from_port(base, port) + MV_SATAHC_ARBTR_REG_SZ + - ((port & MV_PORT_MASK) * MV_PORT_REG_SZ)); + (mv_hardport_from_port(port) * MV_PORT_REG_SZ); } static inline void __iomem *mv_ap_base(struct ata_port *ap) @@ -1089,7 +1143,7 @@ static void mv_err_intr(struct ata_port *ap) /* check for fatal here and recover if needed */ if (EDMA_ERR_FATAL & edma_err_cause) { - mv_phy_reset(ap); + mv_stop_and_reset(ap); } } @@ -1236,6 +1290,51 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port) +{ + void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port); + unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL; + + return hc_mmio + ofs; +} + +static unsigned int mv5_scr_offset(unsigned int sc_reg_in) +{ + unsigned int ofs; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_ERROR: + case SCR_CONTROL: + ofs = sc_reg_in * sizeof(u32); + break; + default: + ofs = 0xffffffffU; + break; + } + return ofs; +} + +static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) +{ + void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) + return readl(mmio + ofs); + else + return (u32) ofs; +} + +static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) +{ + void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) + writelfl(val, mmio + ofs); +} + static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) { u8 rev_id; @@ -1262,7 +1361,13 @@ static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *mmio) { - /* FIXME */ + void __iomem *phy_mmio = mv5_phy_base(mmio, idx); + u32 tmp; + + tmp = readl(phy_mmio + MV5_PHY_MODE); + + hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */ + hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */ } static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) @@ -1281,13 +1386,90 @@ static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port) { - /* FIXME */ + void __iomem *phy_mmio = mv5_phy_base(mmio, port); + const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5); + u32 tmp; + int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); + + if (fix_apm_sq) { + tmp = readl(phy_mmio + MV5_LT_MODE); + tmp |= (1 << 19); + writel(tmp, phy_mmio + MV5_LT_MODE); + + tmp = readl(phy_mmio + MV5_PHY_CTL); + tmp &= ~0x3; + tmp |= 0x1; + writel(tmp, phy_mmio + MV5_PHY_CTL); + } + + tmp = readl(phy_mmio + MV5_PHY_MODE); + tmp &= ~mask; + tmp |= hpriv->signal[port].pre; + tmp |= hpriv->signal[port].amps; + writel(tmp, phy_mmio + MV5_PHY_MODE); +} + + +#undef ZERO +#define ZERO(reg) writel(0, port_mmio + (reg)) +static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + + mv_channel_reset(hpriv, mmio, port); + + ZERO(0x028); /* command */ + writel(0x11f, port_mmio + EDMA_CFG_OFS); + ZERO(0x004); /* timer */ + ZERO(0x008); /* irq err cause */ + ZERO(0x00c); /* irq err mask */ + ZERO(0x010); /* rq bah */ + ZERO(0x014); /* rq inp */ + ZERO(0x018); /* rq outp */ + ZERO(0x01c); /* respq bah */ + ZERO(0x024); /* respq outp */ + ZERO(0x020); /* respq inp */ + ZERO(0x02c); /* test control */ + writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); } +#undef ZERO -static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio) +#define ZERO(reg) writel(0, hc_mmio + (reg)) +static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int hc) { - /* FIXME */ - return 1; + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + u32 tmp; + + ZERO(0x00c); + ZERO(0x010); + ZERO(0x014); + ZERO(0x018); + + tmp = readl(hc_mmio + 0x20); + tmp &= 0x1c1c1c1c; + tmp |= 0x03030303; + writel(tmp, hc_mmio + 0x20); +} +#undef ZERO + +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) +{ + unsigned int hc, port; + + for (hc = 0; hc < n_hc; hc++) { + for (port = 0; port < MV_PORTS_PER_HC; port++) + mv5_reset_hc_port(hpriv, mmio, + (hc * MV_PORTS_PER_HC) + port); + + mv5_reset_one_hc(hpriv, mmio, hc); + } + + return 0; } #undef ZERO @@ -1335,7 +1517,8 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) * LOCKING: * Inherited from caller. */ -static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio) +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) { void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; int i, rc = 0; @@ -1415,9 +1598,11 @@ static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) writel(0x00000060, mmio + MV_GPIO_PORT_CTL); } -static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *port_mmio, +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port) { + void __iomem *port_mmio = mv_port_base(mmio, port); + u32 hp_flags = hpriv->hp_flags; int fix_phy_mode2 = hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); @@ -1473,6 +1658,44 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *port_mmio, writel(m2, port_mmio + PHY_MODE2); } +static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no) +{ + void __iomem *port_mmio = mv_port_base(mmio, port_no); + + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); + + if (IS_60XX(hpriv)) { + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); + ifctl |= (1 << 12) | (1 << 7); + writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); + } + + udelay(25); /* allow reset propagation */ + + /* Spec never mentions clearing the bit. Marvell's driver does + * clear the bit, however. + */ + writelfl(0, port_mmio + EDMA_CMD_OFS); + + hpriv->ops->phy_errata(hpriv, mmio, port_no); + + if (IS_50XX(hpriv)) + mdelay(1); +} + +static void mv_stop_and_reset(struct ata_port *ap) +{ + struct mv_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + + mv_stop_dma(ap); + + mv_channel_reset(hpriv, mmio, ap->port_no); + + mv_phy_reset(ap); +} + /** * mv_phy_reset - Perform eDMA reset followed by COMRESET * @ap: ATA channel to manipulate @@ -1487,7 +1710,6 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *port_mmio, static void mv_phy_reset(struct ata_port *ap) { struct mv_port_priv *pp = ap->private_data; - struct mv_host_priv *hpriv = ap->host_set->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; @@ -1495,25 +1717,6 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - mv_stop_dma(ap); - - writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); - - if (IS_60XX(hpriv)) { - u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); - ifctl |= (1 << 12) | (1 << 7); - writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); - } - - udelay(25); /* allow reset propagation */ - - /* Spec never mentions clearing the bit. Marvell's driver does - * clear the bit, however. - */ - writelfl(0, port_mmio + EDMA_CMD_OFS); - - hpriv->ops->phy_errata(hpriv, port_mmio, ap->port_no); - DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); @@ -1589,7 +1792,7 @@ static void mv_eng_timeout(struct ata_port *ap) &qc->scsicmd->cmnd); mv_err_intr(ap); - mv_phy_reset(ap); + mv_stop_and_reset(ap); if (!qc) { printk(KERN_ERR "ata%u: BUG: timeout without command\n", @@ -1765,7 +1968,7 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, for (port = 0; port < probe_ent->n_ports; port++) hpriv->ops->read_preamp(hpriv, port, mmio); - rc = hpriv->ops->reset_hc(hpriv, mmio); + rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); if (rc) goto done; @@ -1774,15 +1977,15 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, hpriv->ops->enable_leds(hpriv, mmio); for (port = 0; port < probe_ent->n_ports; port++) { - void __iomem *port_mmio = mv_port_base(mmio, port); - if (IS_60XX(hpriv)) { + void __iomem *port_mmio = mv_port_base(mmio, port); + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); ifctl |= (1 << 12); writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); } - hpriv->ops->phy_errata(hpriv, port_mmio, port); + hpriv->ops->phy_errata(hpriv, mmio, port); } for (port = 0; port < probe_ent->n_ports; port++) { From ad36d1a533da91d3448029b4da1113c5b880f25d Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Nov 2005 13:56:37 -0500 Subject: [PATCH 011/169] [libata ahci] error handling fixes Needed to get ATAPI working. - dump hardware error bits, if hardware signals an error - only reset hardware during timeout if a command was active - call ata_qc_complete() with a fine-grained error mask. Needed so that atapi_qc_complete() can distinguish between device errors and other errors. --- drivers/scsi/ahci.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 4e96ec5f2ff9..c710a7def7a7 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -603,7 +603,12 @@ static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) writel(tmp, port_mmio + PORT_CMD); readl(port_mmio + PORT_CMD); /* flush */ - printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id); + printk(KERN_WARNING "ata%u: error occurred, port reset (%s%s%s%s)\n", + ap->id, + irq_stat & PORT_IRQ_TF_ERR ? "taskf " : "", + irq_stat & PORT_IRQ_HBUS_ERR ? "hbus " : "", + irq_stat & PORT_IRQ_HBUS_DATA_ERR ? "hbus_data " : "", + irq_stat & PORT_IRQ_IF_ERR ? "if " : ""); } static void ahci_eng_timeout(struct ata_port *ap) @@ -618,13 +623,13 @@ static void ahci_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host_set->lock, flags); - ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); - qc = ata_qc_from_tag(ap, ap->active_tag); if (!qc) { printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); } else { + ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); + /* hack alert! We cannot use the supplied completion * function from inside the ->eh_strategy_handler() thread. * libata is the only user of ->eh_strategy_handler() in @@ -659,9 +664,18 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) } if (status & PORT_IRQ_FATAL) { - ahci_intr_error(ap, status); + unsigned int err_mask; + if (status & PORT_IRQ_TF_ERR) + err_mask = AC_ERR_DEV; + else if (status & PORT_IRQ_IF_ERR) + err_mask = AC_ERR_ATA_BUS; + else + err_mask = AC_ERR_HOST_BUS; + + if (err_mask != AC_ERR_DEV) + ahci_intr_error(ap, status); if (qc) - ata_qc_complete(qc, AC_ERR_OTHER); + ata_qc_complete(qc, err_mask); } return 1; From e1410f2d951d45aee3bdbcc05ecedaaa9db276e5 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Nov 2005 14:06:26 -0500 Subject: [PATCH 012/169] [libata] fix bugs in ATAPI padding DMA mapping code The ATAPI pad-to-next-32bit-boundary code modifies the scatterlist's length variable, sometimes to zero. x86-64 platform would oops if a zero-length scatterlist entry was asked to be mapped. Work around this by ensuring that we never DMA-map a zero length buffer or SG entry. --- drivers/scsi/libata-core.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d81db3a3d4b9..1ccaf467d516 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2409,7 +2409,8 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); if (qc->flags & ATA_QCFLAG_SG) { - dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir); + if (qc->n_elem) + dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir); /* restore last sg */ sg[qc->orig_n_elem - 1].length += qc->pad_len; if (pad_buf) { @@ -2419,8 +2420,10 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) kunmap_atomic(psg->page, KM_IRQ0); } } else { - dma_unmap_single(ap->host_set->dev, sg_dma_address(&sg[0]), - sg_dma_len(&sg[0]), dir); + if (sg_dma_len(&sg[0]) > 0) + dma_unmap_single(ap->host_set->dev, + sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), + dir); /* restore sg */ sg->length += qc->pad_len; if (pad_buf) @@ -2619,6 +2622,11 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) sg->length, qc->pad_len); } + if (!sg->length) { + sg_dma_address(sg) = 0; + goto skip_map; + } + dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt, sg->length, dir); if (dma_mapping_error(dma_address)) { @@ -2628,6 +2636,7 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) } sg_dma_address(sg) = dma_address; +skip_map: sg_dma_len(sg) = sg->length; DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), @@ -2655,7 +2664,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct scatterlist *sg = qc->__sg; struct scatterlist *lsg = &sg[qc->n_elem - 1]; - int n_elem, dir; + int n_elem, pre_n_elem, dir, trim_sg = 0; VPRINTK("ENTER, ata%u\n", ap->id); assert(qc->flags & ATA_QCFLAG_SG); @@ -2689,13 +2698,24 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) sg_dma_len(psg) = ATA_DMA_PAD_SZ; /* trim last sg */ lsg->length -= qc->pad_len; + if (lsg->length == 0) + trim_sg = 1; DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", qc->n_elem - 1, lsg->length, qc->pad_len); } + pre_n_elem = qc->n_elem; + if (trim_sg && pre_n_elem) + pre_n_elem--; + + if (!pre_n_elem) { + n_elem = 0; + goto skip_map; + } + dir = qc->dma_dir; - n_elem = dma_map_sg(ap->host_set->dev, sg, qc->n_elem, dir); + n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir); if (n_elem < 1) { /* restore last sg */ lsg->length += qc->pad_len; @@ -2704,6 +2724,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) DPRINTK("%d sg elements mapped\n", n_elem); +skip_map: qc->n_elem = n_elem; return 0; From 2c13b7cee045af689b36349c2bc6a9ed6e3d73fa Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Nov 2005 14:14:16 -0500 Subject: [PATCH 013/169] [libata] minor fixes, new helpers - in ata_dev_identify(), don't assume that all devices are either ATA or ATAPI. In the future, this code will see port multipliers and other devices. - make a debugging printk less verbose - add new helper ata_qc_reinit() - add new helper BPRINTK() and port flag ATA_FLAG_DEBUGMSG, for fine-grained debugging use. --- drivers/scsi/libata-core.c | 11 +++-------- include/linux/libata.h | 14 ++++++++++++++ 2 files changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1ccaf467d516..3855bfa8e8d4 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1263,7 +1263,7 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) } /* ATAPI-specific feature tests */ - else { + else if (dev->class == ATA_DEV_ATAPI) { if (ata_id_is_ata(dev->id)) /* sanity check */ goto err_out_nosup; @@ -2399,7 +2399,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) if (qc->flags & ATA_QCFLAG_SINGLE) assert(qc->n_elem == 1); - DPRINTK("unmapping %u sg elements\n", qc->n_elem); + VPRINTK("unmapping %u sg elements\n", qc->n_elem); /* if we padded the buffer out to 32-bit bound, and data * xfer direction is from-device, we must copy from the @@ -3432,16 +3432,11 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, qc = ata_qc_new(ap); if (qc) { - qc->__sg = NULL; - qc->flags = 0; qc->scsicmd = NULL; qc->ap = ap; qc->dev = dev; - qc->cursect = qc->cursg = qc->cursg_ofs = 0; - qc->nsect = 0; - qc->nbytes = qc->curbytes = 0; - ata_tf_init(ap, &qc->tf, dev->devno); + ata_qc_reinit(qc); } return qc; diff --git a/include/linux/libata.h b/include/linux/libata.h index ad5996183ec2..f2dbb684ce9e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -59,6 +59,8 @@ #define VPRINTK(fmt, args...) #endif /* ATA_DEBUG */ +#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) + #ifdef ATA_NDEBUG #define assert(expr) #else @@ -119,6 +121,7 @@ enum { ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */ ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once * proper HSM is in place. */ + ATA_FLAG_DEBUGMSG = (1 << 10), ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ @@ -659,6 +662,17 @@ static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, uns tf->device = ATA_DEVICE_OBS | ATA_DEV1; } +static inline void ata_qc_reinit(struct ata_queued_cmd *qc) +{ + qc->__sg = NULL; + qc->flags = 0; + qc->cursect = qc->cursg = qc->cursg_ofs = 0; + qc->nsect = 0; + qc->nbytes = qc->curbytes = 0; + + ata_tf_init(qc->ap, &qc->tf, qc->dev->devno); +} + /** * ata_irq_on - Enable interrupts on a port. From c6e6e666cbfe40f0d7fb1a293ff6332973acac37 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Nov 2005 14:50:05 -0500 Subject: [PATCH 014/169] [libata] REQUEST SENSE handling fixes - Move ATAPI check-condition handling out of the timeout handler - Use multi-qc-issue feature to issue REQUEST SENSE ATAPI PACKET command upon receiving an ATAPI check-condition. This cleans things up a lot, and eliminates a nasty recursion bug. --- drivers/scsi/libata-core.c | 22 ----------- drivers/scsi/libata-scsi.c | 77 +++++++++++++++++++++----------------- drivers/scsi/libata.h | 2 - 3 files changed, 43 insertions(+), 58 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3855bfa8e8d4..ba1eb8b38e00 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3284,32 +3284,11 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_host_set *host_set = ap->host_set; - struct ata_device *dev = qc->dev; u8 host_stat = 0, drv_stat; unsigned long flags; DPRINTK("ENTER\n"); - /* FIXME: doesn't this conflict with timeout handling? */ - if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) { - struct scsi_cmnd *cmd = qc->scsicmd; - - if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) { - - /* finish completing original command */ - spin_lock_irqsave(&host_set->lock, flags); - __ata_qc_complete(qc); - spin_unlock_irqrestore(&host_set->lock, flags); - - atapi_request_sense(ap, dev, cmd); - - cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16); - scsi_finish_command(cmd); - - goto out; - } - } - spin_lock_irqsave(&host_set->lock, flags); /* hack alert! We cannot use the supplied completion @@ -3348,7 +3327,6 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) spin_unlock_irqrestore(&host_set->lock, flags); -out: DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 0df4b682965d..3b4ca55a3332 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1955,22 +1955,44 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 done(cmd); } -void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd) +static int atapi_sense_complete(struct ata_queued_cmd *qc,unsigned int err_mask) { - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; - int rc; + if (err_mask && ((err_mask & AC_ERR_DEV) == 0)) + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); - DPRINTK("ATAPI request sense\n"); + qc->scsidone(qc->scsicmd); + return 0; +} - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); +/* is it pointless to prefer PIO for "safety reasons"? */ +static inline int ata_pio_use_silly(struct ata_port *ap) +{ + return (ap->flags & ATA_FLAG_PIO_DMA); +} + +static void atapi_request_sense(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *cmd = qc->scsicmd; + + DPRINTK("ATAPI request sense\n"); /* FIXME: is this needed? */ memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + ap->ops->tf_read(ap, &qc->tf); + + /* fill these in, for the case where they are -not- overwritten */ + cmd->sense_buffer[0] = 0x70; + cmd->sense_buffer[2] = qc->tf.feature >> 4; + + ata_qc_reinit(qc); + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); qc->dma_dir = DMA_FROM_DEVICE; @@ -1981,22 +2003,20 @@ void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; qc->tf.command = ATA_CMD_PACKET; - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; + if (ata_pio_use_silly(ap)) { + qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.feature |= ATAPI_PKT_DMA; + } else { + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + } qc->nbytes = SCSI_SENSE_BUFFERSIZE; - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; + qc->complete_fn = atapi_sense_complete; - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - if (rc) - ata_port_disable(ap); - else - wait_for_completion(&wait); + if (ata_qc_issue(qc)) + ata_qc_complete(qc, AC_ERR_OTHER); DPRINTK("EXIT\n"); } @@ -2008,19 +2028,8 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) VPRINTK("ENTER, err_mask 0x%X\n", err_mask); if (unlikely(err_mask & AC_ERR_DEV)) { - DPRINTK("request check condition\n"); - - /* FIXME: command completion with check condition - * but no sense causes the error handler to run, - * which then issues REQUEST SENSE, fills in the sense - * buffer, and completes the command (for the second - * time). We need to issue REQUEST SENSE some other - * way, to avoid completing the command twice. - */ cmd->result = SAM_STAT_CHECK_CONDITION; - - qc->scsidone(cmd); - + atapi_request_sense(qc); return 1; } diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index fad051ca4672..74a84e0ec0a4 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -54,8 +54,6 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); /* libata-scsi.c */ -extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd); extern void ata_scsi_scan_host(struct ata_port *ap); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, From 12da2a435c1e8b9abb780d928ccbf04fc3d860a7 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Mon, 14 Nov 2005 21:42:46 -0800 Subject: [PATCH 015/169] [IPV6]: small fix for ipv6_dev_get_saddr(...) The "score.rule++" doesn't make any sense for me. According to codes above, I think it should be "hiscore.rule++;" . Signed-off-by: Yan Zheng Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index ddcf7754eec2..56a09a4ac410 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1045,9 +1045,10 @@ int ipv6_dev_get_saddr(struct net_device *daddr_dev, } #endif /* Rule 8: Use longest matching prefix */ - if (hiscore.rule < 8) + if (hiscore.rule < 8) { hiscore.matchlen = ipv6_addr_diff(&ifa_result->addr, daddr); - score.rule++; + hiscore.rule++; + } score.matchlen = ipv6_addr_diff(&ifa->addr, daddr); if (score.matchlen > hiscore.matchlen) { score.rule = 8; From cb422c464bdaeeb3b9ad4539010e357bf1bd1745 Mon Sep 17 00:00:00 2001 From: Luiz Capitulino Date: Mon, 14 Nov 2005 21:43:36 -0800 Subject: [PATCH 016/169] [IPV6]: Fixes sparse warning in ipv6/ipv6_sockglue.c The patch below fixes the following sparse warning: net/ipv6/ipv6_sockglue.c:291:13: warning: Using plain integer as NULL pointer Signed-off-by: Luiz Capitulino Signed-off-by: David S. Miller --- net/ipv6/ipv6_sockglue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 003fd99ff597..25757ade989f 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -287,7 +287,7 @@ int ipv6_setsockopt(struct sock *sk, int level, int optname, { struct ipv6_txoptions *opt; if (optlen == 0) - optval = 0; + optval = NULL; /* hop-by-hop / destination options are privileged option */ retv = -EPERM; From 59c6196e59a4b85d9c994e70ff20a460cdbaa003 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 14 Nov 2005 21:57:15 -0800 Subject: [PATCH 017/169] [LLC]: Fix TX window scaling Signed-off-by: Jochen Friedrich Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/llc/llc_c_ac.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c index b0bcfb1f12dd..91fb6bc1b116 100644 --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -866,7 +866,8 @@ int llc_conn_ac_send_ack_if_needed(struct sock *sk, struct sk_buff *skb) llc->ack_must_be_send = 1; llc->ack_pf = pf_bit & 1; } - if (((llc->vR - llc->first_pdu_Ns + 129) % 128) >= llc->npta) { + if (((llc->vR - llc->first_pdu_Ns + 1 + LLC_2_SEQ_NBR_MODULO) + % LLC_2_SEQ_NBR_MODULO) >= llc->npta) { llc_conn_ac_send_rr_rsp_f_set_ackpf(sk, skb); llc->ack_must_be_send = 0; llc->ack_pf = 0; @@ -994,8 +995,8 @@ static int llc_conn_ac_inc_npta_value(struct sock *sk, struct sk_buff *skb) llc->dec_step = 0; llc->dec_cntr = llc->inc_cntr = 2; ++llc->npta; - if (llc->npta > 127) - llc->npta = 127 ; + if (llc->npta > ~LLC_2_SEQ_NBR_MODULO) + llc->npta = ~LLC_2_SEQ_NBR_MODULO ; } else --llc->inc_cntr; return 0; @@ -1065,9 +1066,10 @@ int llc_conn_ac_dec_tx_win_size(struct sock *sk, struct sk_buff *skb) struct llc_sock *llc = llc_sk(sk); u8 unacked_pdu = skb_queue_len(&llc->pdu_unack_q); - llc->k -= unacked_pdu; - if (llc->k < 2) - llc->k = 2; + if (llc->k - unacked_pdu < 1) + llc->k = 1; + else + llc->k -= unacked_pdu; return 0; } @@ -1084,8 +1086,8 @@ int llc_conn_ac_inc_tx_win_size(struct sock *sk, struct sk_buff *skb) struct llc_sock *llc = llc_sk(sk); llc->k += 1; - if (llc->k > 128) - llc->k = 128 ; + if (llc->k > ~LLC_2_SEQ_NBR_MODULO) + llc->k = ~LLC_2_SEQ_NBR_MODULO ; return 0; } @@ -1309,7 +1311,7 @@ int llc_conn_ac_set_vs_nr(struct sock *sk, struct sk_buff *skb) static int llc_conn_ac_inc_vs_by_1(struct sock *sk, struct sk_buff *skb) { - llc_sk(sk)->vS = (llc_sk(sk)->vS + 1) % 128; + llc_sk(sk)->vS = (llc_sk(sk)->vS + 1) % LLC_2_SEQ_NBR_MODULO; return 0; } From 451677c46feb5fb39cb7f71035b8716064fcbd57 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 14 Nov 2005 21:57:46 -0800 Subject: [PATCH 018/169] [LLC]: Make core block on remote busy. Signed-off-by: Jochen Friedrich Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/llc/af_llc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 59d02cbbeb9e..c3f0b0783453 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -116,7 +116,9 @@ static int llc_ui_send_data(struct sock* sk, struct sk_buff *skb, int noblock) struct llc_sock* llc = llc_sk(sk); int rc = 0; - if (unlikely(llc_data_accept_state(llc->state) || llc->p_flag)) { + if (unlikely(llc_data_accept_state(llc->state) || + llc->remote_busy_flag || + llc->p_flag)) { long timeout = sock_sndtimeo(sk, noblock); rc = llc_ui_wait_for_busy_core(sk, timeout); @@ -542,6 +544,7 @@ static int llc_ui_wait_for_busy_core(struct sock *sk, long timeout) if (sk_wait_event(sk, &timeout, (sk->sk_shutdown & RCV_SHUTDOWN) || (!llc_data_accept_state(llc->state) && + !llc->remote_busy_flag && !llc->p_flag))) break; rc = -ERESTARTSYS; From cf225356578326308b16a0fd03ff3fa72fe3da07 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 14 Nov 2005 21:58:18 -0800 Subject: [PATCH 019/169] [LLC]: Fix typo Signed-off-by: Jochen Friedrich Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- include/net/llc_pdu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h index c7a959428b4f..8f6306581fa7 100644 --- a/include/net/llc_pdu.h +++ b/include/net/llc_pdu.h @@ -357,7 +357,7 @@ static inline void llc_pdu_init_as_test_rsp(struct sk_buff *skb, /* LLC Type 1 XID command/response information fields format */ struct llc_xid_info { - u8 fmt_id; /* always 0x18 for LLC */ + u8 fmt_id; /* always 0x81 for LLC */ u8 type; /* different if NULL/non-NULL LSAP */ u8 rw; /* sender receive window */ }; From eceab4ac8d9dd8955e0961fd7477664c087a9017 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 15 Nov 2005 11:31:41 +0000 Subject: [PATCH 020/169] [ARM] Use kernel/power/Kconfig Rather than defining our own PM option, use kernel/power/Kconfig. This fixes build errors introduced by bca73e4bf8563d83f7856164caa44d5f42e44cca Signed-off-by: Russell King --- arch/arm/Kconfig | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 70b007e66926..4b15f5f1e254 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -652,25 +652,11 @@ endmenu menu "Power management options" -config PM - bool "Power Management support" - ---help--- - "Power Management" means that parts of your computer are shut - off or put into a power conserving "sleep" mode if they are not - being used. There are two competing standards for doing this: APM - and ACPI. If you want to use either one, say Y here and then also - to the requisite support below. - - Power Management is most important for battery powered laptop - computers; if you have a laptop, check out the Linux Laptop home - page on the WWW at or - Tuxmobil - Linux on Mobile Computers at - and the Battery Powered Linux mini-HOWTO, available from - . +source "kernel/power/Kconfig" config APM tristate "Advanced Power Management Emulation" - depends on PM + depends on PM_LEGACY ---help--- APM is a BIOS specification for saving power using several different techniques. This is mostly useful for battery powered laptops with From 19842d67340e4a8f616552d344e97fc7452aa37a Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 15 Nov 2005 00:09:04 -0800 Subject: [PATCH 021/169] [PATCH] drop "[PATCH] i386 kexec-on-panic: Don't shutdown the apics" A patch by Eric was merged (f2b36db692b7ff6972320ad9839ae656a3b0ee3e) and later on reverted back (1e4c85f97fe26fbd70da12148b3992c0e00361fd). Along with above patch, another patch was posted and has been merged (3d1675b41b02d64bd1185903ea0d25a8c0bb6dea). That patch was dependent on the above patch and now it should also be reverted. Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/crash.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index af809ccf5fbe..0248e084017c 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -21,6 +21,7 @@ #include #include #include +#include #include @@ -147,6 +148,7 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu) regs = &fixed_regs; } crash_save_this_cpu(regs, cpu); + disable_local_APIC(); atomic_dec(&waiting_for_crash_ipi); /* Assume hlt works */ halt(); @@ -186,6 +188,7 @@ static void nmi_shootdown_cpus(void) } /* Leave the nmi callback set */ + disable_local_APIC(); } #else static void nmi_shootdown_cpus(void) @@ -210,5 +213,9 @@ void machine_crash_shutdown(struct pt_regs *regs) /* Make a note of crashing cpu. Will be used in NMI callback.*/ crashing_cpu = smp_processor_id(); nmi_shootdown_cpus(); + lapic_shutdown(); +#if defined(CONFIG_X86_IO_APIC) + disable_IO_APIC(); +#endif crash_save_self(regs); } From d4ed803c564701eae9534ab26a86ddb06acaf49c Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 15 Nov 2005 00:09:06 -0800 Subject: [PATCH 022/169] [PATCH] Make sysctl.h (again) usable from userspace Make sysctl.h (again) useable from userspace Signed-off-by: Harald Welte Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sysctl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 64f203c45378..6bc03c911a83 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -20,7 +20,6 @@ #include #include -#include #include struct file; @@ -859,6 +858,7 @@ enum }; #ifdef __KERNEL__ +#include extern void sysctl_init(void); From 3225e1d3d1ebc3fcb74fbbb166520f35c35a22f4 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 15 Nov 2005 00:09:07 -0800 Subject: [PATCH 023/169] [PATCH] ipmi: bump-driver-version Lots of good changes to the driver lately that userspace will care about the version of the driver. Bump the version from 36.0 to 38.0 to be higher than 37 that the 2.4 driver came out with a few weeks ago which doesn't have all the same changes. Signed-off-by: Matt Domsch Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index d16bd4b5c117..6b302a930e5f 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -48,7 +48,7 @@ #define PFX "IPMI message handler: " -#define IPMI_DRIVER_VERSION "36.0" +#define IPMI_DRIVER_VERSION "38.0" static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); static int ipmi_init_msghandler(void); From fa63b229829e73361900183bc1ae21b71b6c2dae Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Tue, 15 Nov 2005 00:09:09 -0800 Subject: [PATCH 024/169] [PATCH] Add missing EXPORT_SYMBOLS() for __ide_mm_* functions on powerpc These exported symbols are in arch/ppc/ but missing from arch/powerpc/ for ppc32 builds. Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/ppc_ksyms.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 5dcf4ba05ee8..59846b40d521 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -105,6 +105,13 @@ EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__strnlen_user); +#ifndef __powerpc64__ +EXPORT_SYMBOL(__ide_mm_insl); +EXPORT_SYMBOL(__ide_mm_outsw); +EXPORT_SYMBOL(__ide_mm_insw); +EXPORT_SYMBOL(__ide_mm_outsl); +#endif + EXPORT_SYMBOL(_insb); EXPORT_SYMBOL(_outsb); EXPORT_SYMBOL(_insw); From 1887b93529410633b5529a7c2d304897dbed5b3e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 15 Nov 2005 00:09:10 -0800 Subject: [PATCH 025/169] [PATCH] knfsd: make sure nfsd doesn't hog a cpu forever Being kernel-threads, nfsd servers don't get pre-empted (depending on CONFIG). If there is a steady stream of NFS requests that can be served from cache, an nfsd thread may hold on to a cpu indefinitely, which isn't very friendly. So it is good to have a cond_resched in there (just before looking for a new request to serve), to make sure we play nice. Signed-off-by: Neil Brown Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- net/sunrpc/svcsock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index e50e7cf43737..c6a51911e71e 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1178,6 +1178,7 @@ svc_recv(struct svc_serv *serv, struct svc_rqst *rqstp, long timeout) arg->tail[0].iov_len = 0; try_to_freeze(); + cond_resched(); if (signalled()) return -EINTR; From e8a0033451f7972169b2f375be34d9d805ad8687 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 15 Nov 2005 00:09:11 -0800 Subject: [PATCH 026/169] [PATCH] md: mark START_ARRAY deprecated with a date This was marked deprecated "after 2.6" back in the 2.5 days. But now it seems there isn't going to be any "after 2.6", and we deprecate by date now. So set a date. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/feature-removal-schedule.txt | 9 +++++++++ drivers/md/md.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 429db4bf98ec..24fe8edad304 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -140,3 +140,12 @@ What: EXPORT_SYMBOL(lookup_hash) When: January 2006 Why: Too low-level interface. Use lookup_one_len or lookup_create instead. Who: Christoph Hellwig + +--------------------------- + +What: START_ARRAY ioctl for md +When: July 2006 +Files: drivers/md/md.c +Why: Not reliable by design - can fail when most needed. + Alternatives exist +Who: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index adf960d8a7c9..a9f032e341cb 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3156,7 +3156,7 @@ static int md_ioctl(struct inode *inode, struct file *file, if (cnt > 0 ) { printk(KERN_WARNING "md: %s(pid %d) used deprecated START_ARRAY ioctl. " - "This will not be supported beyond 2.6\n", + "This will not be supported beyond July 2006\n", current->comm, current->pid); cnt--; } From 93588e2284b6be1873cc0bb7fbf0947bdbf72830 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 15 Nov 2005 00:09:12 -0800 Subject: [PATCH 027/169] [PATCH] md: make md threads interruptible again Despite the fact that md threads don't need to be signalled, and won't respond to signals anyway, we need to have an 'interruptible' wait, else they stay in 'D' state and add to the load average. (akpm: the signal_pending() test is unneeded - we'll fix that up in the next round. For now, leave it there because that's how the code used to be). Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index a9f032e341cb..f3fed662f32e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3437,10 +3437,19 @@ static int md_thread(void * arg) allow_signal(SIGKILL); while (!kthread_should_stop()) { - wait_event_timeout(thread->wqueue, - test_bit(THREAD_WAKEUP, &thread->flags) - || kthread_should_stop(), - thread->timeout); + /* We need to wait INTERRUPTIBLE so that + * we don't add to the load-average. + * That means we need to be sure no signals are + * pending + */ + if (signal_pending(current)) + flush_signals(current); + + wait_event_interruptible_timeout + (thread->wqueue, + test_bit(THREAD_WAKEUP, &thread->flags) + || kthread_should_stop(), + thread->timeout); try_to_freeze(); clear_bit(THREAD_WAKEUP, &thread->flags); From d6a1a64aec2b2e2e13b629ed72afd319d8bce5da Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 15 Nov 2005 00:09:13 -0800 Subject: [PATCH 028/169] [PATCH] hfc_usb: fix usb device table We need to use the USB_DEVICE macro here, else the modinfo aliases go all wrong. Also, correctly terminate the table, as noted by Dave Jones Cc: Greg KH Signed-off-by: Andrew Morton Acked-by: Karsten Keil Signed-off-by: Linus Torvalds --- drivers/isdn/hisax/hfc_usb.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 32bf0d5d0f9a..f8457ef48826 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -71,78 +71,68 @@ typedef struct { /****************************************/ static struct usb_device_id hfcusb_idtab[] = { { - .idVendor = 0x0959, - .idProduct = 0x2bd0, + USB_DEVICE(0x0959, 0x2bd0), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_OFF, {4, 0, 2, 1}, "ISDN USB TA (Cologne Chip HFC-S USB based)"}), }, { - .idVendor = 0x0675, - .idProduct = 0x1688, + USB_DEVICE(0x0675, 0x1688), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {1, 2, 0, 0}, "DrayTek miniVigor 128 USB ISDN TA"}), }, { - .idVendor = 0x07b0, - .idProduct = 0x0007, + USB_DEVICE(0x07b0, 0x0007), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Billion tiny USB ISDN TA 128"}), }, { - .idVendor = 0x0742, - .idProduct = 0x2008, + USB_DEVICE(0x0742, 0x2008), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "Stollmann USB TA"}), }, { - .idVendor = 0x0742, - .idProduct = 0x2009, + USB_DEVICE(0x0742, 0x2009), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "Aceex USB ISDN TA"}), }, { - .idVendor = 0x0742, - .idProduct = 0x200A, + USB_DEVICE(0x0742, 0x200A), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "OEM USB ISDN TA"}), }, { - .idVendor = 0x08e3, - .idProduct = 0x0301, + USB_DEVICE(0x08e3, 0x0301), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {2, 0, 1, 4}, "Olitec USB RNIS"}), }, { - .idVendor = 0x07fa, - .idProduct = 0x0846, + USB_DEVICE(0x07fa, 0x0846), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Bewan Modem RNIS USB"}), }, { - .idVendor = 0x07fa, - .idProduct = 0x0847, + USB_DEVICE(0x07fa, 0x0847), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Djinn Numeris USB"}), }, { - .idVendor = 0x07b0, - .idProduct = 0x0006, + USB_DEVICE(0x07b0, 0x0006), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Twister ISDN TA"}), }, + { } }; - /***************************************************************/ /* structure defining input+output fifos (interrupt/bulk mode) */ /***************************************************************/ From 09071e35f9f0b308c37c9853766de573591589ea Mon Sep 17 00:00:00 2001 From: Toni Mueller Date: Tue, 15 Nov 2005 00:09:14 -0800 Subject: [PATCH 029/169] [PATCH] sdladrv.c build fix gcc4 doesn't allow typecasted lvals. Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/wan/sdladrv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wan/sdladrv.c b/drivers/net/wan/sdladrv.c index 7c2cf2e76300..032c0f81928e 100644 --- a/drivers/net/wan/sdladrv.c +++ b/drivers/net/wan/sdladrv.c @@ -1994,7 +1994,7 @@ static int detect_s514 (sdlahw_t* hw) modname, hw->irq); /* map the physical PCI memory to virtual memory */ - (void *)hw->dpmbase = ioremap((unsigned long)S514_mem_base_addr, + hw->dpmbase = ioremap((unsigned long)S514_mem_base_addr, (unsigned long)MAX_SIZEOF_S514_MEMORY); /* map the physical control register memory to virtual memory */ hw->vector = (unsigned long)ioremap( From 228322f13fe20bd29e81fca8341cc1fc7ffc5929 Mon Sep 17 00:00:00 2001 From: Miles Bader Date: Tue, 15 Nov 2005 00:09:16 -0800 Subject: [PATCH 030/169] [PATCH] v850: Fix show_interrupts A variable was being used in multiple conflicting ways. I also restructured the code a bit for clarity. Signed-off-by: Miles Bader Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/v850/kernel/irq.c | 81 ++++++++++++++++++++++-------------------- 1 file changed, 43 insertions(+), 38 deletions(-) diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c index 9e85969ba976..534eb8ab97a7 100644 --- a/arch/v850/kernel/irq.c +++ b/arch/v850/kernel/irq.c @@ -1,8 +1,8 @@ /* * arch/v850/kernel/irq.c -- High-level interrupt handling * - * Copyright (C) 2001,02,03,04 NEC Electronics Corporation - * Copyright (C) 2001,02,03,04 Miles Bader + * Copyright (C) 2001,02,03,04,05 NEC Electronics Corporation + * Copyright (C) 2001,02,03,04,05 Miles Bader * Copyright (C) 1994-2000 Ralf Baechle * Copyright (C) 1992 Linus Torvalds * @@ -84,50 +84,55 @@ volatile unsigned long irq_err_count, spurious_count; int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v; - struct irqaction * action; - unsigned long flags; + int irq = *(loff_t *) v; - if (i == 0) { + if (irq == 0) { + int cpu; seq_puts(p, " "); - for (i=0; i < 1 /*smp_num_cpus*/; i++) - seq_printf(p, "CPU%d ", i); + for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++) + seq_printf(p, "CPU%d ", cpu); seq_putc(p, '\n'); } - if (i < NR_IRQS) { - int j, count, num; - const char *type_name = irq_desc[i].handler->typename; - spin_lock_irqsave(&irq_desc[j].lock, flags); - action = irq_desc[i].action; - if (!action) - goto skip; - - count = 0; - num = -1; - for (j = 0; j < NR_IRQS; j++) - if (irq_desc[j].handler->typename == type_name) { - if (i == j) - num = count; - count++; - } + if (irq < NR_IRQS) { + unsigned long flags; + struct irqaction *action; - seq_printf(p, "%3d: ",i); - seq_printf(p, "%10u ", kstat_irqs(i)); - if (count > 1) { - int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1); - seq_printf(p, " %*s%d", 14 - prec, type_name, num); - } else - seq_printf(p, " %14s", type_name); + spin_lock_irqsave(&irq_desc[irq].lock, flags); + + action = irq_desc[irq].action; + if (action) { + int j; + int count = 0; + int num = -1; + const char *type_name = irq_desc[irq].handler->typename; + + for (j = 0; j < NR_IRQS; j++) + if (irq_desc[j].handler->typename == type_name){ + if (irq == j) + num = count; + count++; + } + + seq_printf(p, "%3d: ",irq); + seq_printf(p, "%10u ", kstat_irqs(irq)); + if (count > 1) { + int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1); + seq_printf(p, " %*s%d", 14 - prec, + type_name, num); + } else + seq_printf(p, " %14s", type_name); - seq_printf(p, " %s", action->name); - for (action=action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[j].lock, flags); - } else if (i == NR_IRQS) + seq_printf(p, " %s", action->name); + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); + } + + spin_unlock_irqrestore(&irq_desc[irq].lock, flags); + } else if (irq == NR_IRQS) seq_printf(p, "ERR: %10lu\n", irq_err_count); + return 0; } From f4eeb0a20f017fd8bc849cc50469c2e2e6a0c05c Mon Sep 17 00:00:00 2001 From: Miles Bader Date: Tue, 15 Nov 2005 00:09:17 -0800 Subject: [PATCH 031/169] [PATCH] v850: Add missing include in hardirq.h Signed-off-by: Miles Bader Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-v850/hardirq.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h index 5dfca8047cbe..4f913bccbefb 100644 --- a/include/asm-v850/hardirq.h +++ b/include/asm-v850/hardirq.h @@ -5,6 +5,8 @@ #include #include +#include + typedef struct { unsigned int __softirq_pending; } ____cacheline_aligned irq_cpustat_t; From 0c53508980a95b84c296c4336a831776cc22cf58 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 15 Nov 2005 00:09:18 -0800 Subject: [PATCH 032/169] [PATCH] v850: use generic hardirq code Signed-off-by: Christoph Hellwig Acked-by: Miles Bader Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/v850/Kconfig | 8 + arch/v850/kernel/irq.c | 636 +------------------------------------ include/asm-v850/hardirq.h | 2 + 3 files changed, 15 insertions(+), 631 deletions(-) diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index 89c053b6c2c4..310865903234 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -23,6 +23,14 @@ config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_HARDIRQS + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + # Turn off some random 386 crap that can affect device config config ISA bool diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c index 534eb8ab97a7..7a151c26f82e 100644 --- a/arch/v850/kernel/irq.c +++ b/arch/v850/kernel/irq.c @@ -27,55 +27,15 @@ #include /* - * Controller mappings for all interrupt sources: + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves, it doesn't deserve + * a generic callback i think. */ -irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = { - [0 ... NR_IRQS-1] = { - .handler = &no_irq_type, - .lock = SPIN_LOCK_UNLOCKED - } -}; - -/* - * Special irq handlers. - */ - -irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs) -{ - return IRQ_NONE; -} - -/* - * Generic no controller code - */ - -static void enable_none(unsigned int irq) { } -static unsigned int startup_none(unsigned int irq) { return 0; } -static void disable_none(unsigned int irq) { } -static void ack_none(unsigned int irq) +void ack_bad_irq(unsigned int irq) { - /* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves, it doesn't deserve - * a generic callback i think. - */ printk("received IRQ %d with unknown interrupt type\n", irq); } -/* startup is the same as "enable", shutdown is same as "disable" */ -#define shutdown_none disable_none -#define end_none enable_none - -struct hw_interrupt_type no_irq_type = { - .typename = "none", - .startup = startup_none, - .shutdown = shutdown_none, - .enable = enable_none, - .disable = disable_none, - .ack = ack_none, - .end = end_none -}; - volatile unsigned long irq_err_count, spurious_count; /* @@ -136,596 +96,16 @@ int show_interrupts(struct seq_file *p, void *v) return 0; } -/* - * This should really return information about whether - * we should do bottom half handling etc. Right now we - * end up _always_ checking the bottom half, which is a - * waste of time and is not what some drivers would - * prefer. - */ -int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action) -{ - int status = 1; /* Force the "do bottom halves" bit */ - int ret; - - if (!(action->flags & SA_INTERRUPT)) - local_irq_enable(); - - do { - ret = action->handler(irq, action->dev_id, regs); - if (ret == IRQ_HANDLED) - status |= action->flags; - action = action->next; - } while (action); - if (status & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - local_irq_disable(); - - return status; -} - -/* - * Generic enable/disable code: this just calls - * down into the PIC-specific version for the actual - * hardware disable after having gotten the irq - * controller lock. - */ - -/** - * disable_irq_nosync - disable an irq without waiting - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables of an interrupt - * stack. Unlike disable_irq(), this function does not ensure existing - * instances of the IRQ handler have completed before returning. - * - * This function may be called from IRQ context. - */ - -void inline disable_irq_nosync(unsigned int irq) -{ - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - if (!desc->depth++) { - desc->status |= IRQ_DISABLED; - desc->handler->disable(irq); - } - spin_unlock_irqrestore(&desc->lock, flags); -} - -/** - * disable_irq - disable an irq and wait for completion - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables of an interrupt - * stack. That is for two disables you need two enables. This - * function waits for any pending IRQ handlers for this interrupt - * to complete before returning. If you use this function while - * holding a resource the IRQ handler may need you will deadlock. - * - * This function may be called - with care - from IRQ context. - */ - -void disable_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - synchronize_irq(irq); -} - -/** - * enable_irq - enable interrupt handling on an irq - * @irq: Interrupt to enable - * - * Re-enables the processing of interrupts on this IRQ line - * providing no disable_irq calls are now in effect. - * - * This function may be called from IRQ context. - */ - -void enable_irq(unsigned int irq) -{ - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - switch (desc->depth) { - case 1: { - unsigned int status = desc->status & ~IRQ_DISABLED; - desc->status = status; - if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) { - desc->status = status | IRQ_REPLAY; - hw_resend_irq(desc->handler,irq); - } - desc->handler->enable(irq); - /* fall-through */ - } - default: - desc->depth--; - break; - case 0: - printk("enable_irq(%u) unbalanced from %p\n", irq, - __builtin_return_address(0)); - } - spin_unlock_irqrestore(&desc->lock, flags); -} - /* Handle interrupt IRQ. REGS are the registers at the time of ther interrupt. */ unsigned int handle_irq (int irq, struct pt_regs *regs) { - /* - * We ack quickly, we don't want the irq controller - * thinking we're snobs just because some other CPU has - * disabled global interrupts (we have already done the - * INT_ACK cycles, it's too late to try to pretend to the - * controller that we aren't taking the interrupt). - * - * 0 return value means that this irq is already being - * handled by some other CPU. (or is disabled) - */ - int cpu = smp_processor_id(); - irq_desc_t *desc = irq_desc + irq; - struct irqaction * action; - unsigned int status; - irq_enter(); - kstat_cpu(cpu).irqs[irq]++; - spin_lock(&desc->lock); - desc->handler->ack(irq); - /* - REPLAY is when Linux resends an IRQ that was dropped earlier - WAITING is used by probe to mark irqs that are being tested - */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - status |= IRQ_PENDING; /* we _want_ to handle it */ - - /* - * If the IRQ is disabled for whatever reason, we cannot - * use the action we have. - */ - action = NULL; - if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { - action = desc->action; - status &= ~IRQ_PENDING; /* we commit to handling */ - status |= IRQ_INPROGRESS; /* we are handling it */ - } - desc->status = status; - - /* - * If there is no IRQ handler or it was disabled, exit early. - Since we set PENDING, if another processor is handling - a different instance of this same irq, the other processor - will take care of it. - */ - if (unlikely(!action)) - goto out; - - /* - * Edge triggered interrupts need to remember - * pending events. - * This applies to any hw interrupts that allow a second - * instance of the same irq to arrive while we are in handle_irq - * or in the handler. But the code here only handles the _second_ - * instance of the irq, not the third or fourth. So it is mostly - * useful for irq hardware that does not mask cleanly in an - * SMP environment. - */ - for (;;) { - spin_unlock(&desc->lock); - handle_IRQ_event(irq, regs, action); - spin_lock(&desc->lock); - - if (likely(!(desc->status & IRQ_PENDING))) - break; - desc->status &= ~IRQ_PENDING; - } - desc->status &= ~IRQ_INPROGRESS; - -out: - /* - * The ->end() handler has to deal with interrupts which got - * disabled while the handler was running. - */ - desc->handler->end(irq); - spin_unlock(&desc->lock); - + __do_IRQ(irq, regs); irq_exit(); - return 1; } -/** - * request_irq - allocate an interrupt line - * @irq: Interrupt line to allocate - * @handler: Function to be called when the IRQ occurs - * @irqflags: Interrupt type flags - * @devname: An ascii name for the claiming device - * @dev_id: A cookie passed back to the handler function - * - * This call allocates interrupt resources and enables the - * interrupt line and IRQ handling. From the point this - * call is made your handler function may be invoked. Since - * your handler function must clear any interrupt the board - * raises, you must take care both to initialise your hardware - * and to set up the interrupt handler in the right order. - * - * Dev_id must be globally unique. Normally the address of the - * device data structure is used as the cookie. Since the handler - * receives this value it makes sense to use it. - * - * If your interrupt is shared you must pass a non NULL dev_id - * as this is required when freeing the interrupt. - * - * Flags: - * - * SA_SHIRQ Interrupt is shared - * - * SA_INTERRUPT Disable local interrupts while processing - * - * SA_SAMPLE_RANDOM The interrupt can be used for entropy - * - */ - -int request_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char * devname, - void *dev_id) -{ - int retval; - struct irqaction * action; - -#if 1 - /* - * Sanity-check: shared interrupts should REALLY pass in - * a real dev-ID, otherwise we'll have trouble later trying - * to figure out which interrupt is which (messes up the - * interrupt freeing logic etc). - */ - if (irqflags & SA_SHIRQ) { - if (!dev_id) - printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]); - } -#endif - - if (irq >= NR_IRQS) - return -EINVAL; - if (!handler) - return -EINVAL; - - action = (struct irqaction *) - kmalloc(sizeof(struct irqaction), GFP_KERNEL); - if (!action) - return -ENOMEM; - - action->handler = handler; - action->flags = irqflags; - cpus_clear(action->mask); - action->name = devname; - action->next = NULL; - action->dev_id = dev_id; - - retval = setup_irq(irq, action); - if (retval) - kfree(action); - return retval; -} - -EXPORT_SYMBOL(request_irq); - -/** - * free_irq - free an interrupt - * @irq: Interrupt line to free - * @dev_id: Device identity to free - * - * Remove an interrupt handler. The handler is removed and if the - * interrupt line is no longer in use by any driver it is disabled. - * On a shared IRQ the caller must ensure the interrupt is disabled - * on the card it drives before calling this function. The function - * does not return until any executing interrupts for this IRQ - * have completed. - * - * This function may be called from interrupt context. - * - * Bugs: Attempting to free an irq in a handler for the same irq hangs - * the machine. - */ - -void free_irq(unsigned int irq, void *dev_id) -{ - irq_desc_t *desc; - struct irqaction **p; - unsigned long flags; - - if (irq >= NR_IRQS) - return; - - desc = irq_desc + irq; - spin_lock_irqsave(&desc->lock,flags); - p = &desc->action; - for (;;) { - struct irqaction * action = *p; - if (action) { - struct irqaction **pp = p; - p = &action->next; - if (action->dev_id != dev_id) - continue; - - /* Found it - now remove it from the list of entries */ - *pp = action->next; - if (!desc->action) { - desc->status |= IRQ_DISABLED; - desc->handler->shutdown(irq); - } - spin_unlock_irqrestore(&desc->lock,flags); - - synchronize_irq(irq); - kfree(action); - return; - } - printk("Trying to free free IRQ%d\n",irq); - spin_unlock_irqrestore(&desc->lock,flags); - return; - } -} - -EXPORT_SYMBOL(free_irq); - -/* - * IRQ autodetection code.. - * - * This depends on the fact that any interrupt that - * comes in on to an unassigned handler will get stuck - * with "IRQ_WAITING" cleared and the interrupt - * disabled. - */ - -static DECLARE_MUTEX(probe_sem); - -/** - * probe_irq_on - begin an interrupt autodetect - * - * Commence probing for an interrupt. The interrupts are scanned - * and a mask of potential interrupt lines is returned. - * - */ - -unsigned long probe_irq_on(void) -{ - unsigned int i; - irq_desc_t *desc; - unsigned long val; - unsigned long delay; - - down(&probe_sem); - /* - * something may have generated an irq long ago and we want to - * flush such a longstanding irq before considering it as spurious. - */ - for (i = NR_IRQS-1; i > 0; i--) { - desc = irq_desc + i; - - spin_lock_irq(&desc->lock); - if (!irq_desc[i].action) - irq_desc[i].handler->startup(i); - spin_unlock_irq(&desc->lock); - } - - /* Wait for longstanding interrupts to trigger. */ - for (delay = jiffies + HZ/50; time_after(delay, jiffies); ) - /* about 20ms delay */ barrier(); - - /* - * enable any unassigned irqs - * (we must startup again here because if a longstanding irq - * happened in the previous stage, it may have masked itself) - */ - for (i = NR_IRQS-1; i > 0; i--) { - desc = irq_desc + i; - - spin_lock_irq(&desc->lock); - if (!desc->action) { - desc->status |= IRQ_AUTODETECT | IRQ_WAITING; - if (desc->handler->startup(i)) - desc->status |= IRQ_PENDING; - } - spin_unlock_irq(&desc->lock); - } - - /* - * Wait for spurious interrupts to trigger - */ - for (delay = jiffies + HZ/10; time_after(delay, jiffies); ) - /* about 100ms delay */ barrier(); - - /* - * Now filter out any obviously spurious interrupts - */ - val = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - /* It triggered already - consider it spurious. */ - if (!(status & IRQ_WAITING)) { - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } else - if (i < 32) - val |= 1 << i; - } - spin_unlock_irq(&desc->lock); - } - - return val; -} - -EXPORT_SYMBOL(probe_irq_on); - -/* - * Return a mask of triggered interrupts (this - * can handle only legacy ISA interrupts). - */ - -/** - * probe_irq_mask - scan a bitmap of interrupt lines - * @val: mask of interrupts to consider - * - * Scan the ISA bus interrupt lines and return a bitmap of - * active interrupts. The interrupt probe logic state is then - * returned to its previous value. - * - * Note: we need to scan all the irq's even though we will - * only return ISA irq numbers - just so that we reset them - * all to a known state. - */ -unsigned int probe_irq_mask(unsigned long val) -{ - int i; - unsigned int mask; - - mask = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - if (i < 16 && !(status & IRQ_WAITING)) - mask |= 1 << i; - - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } - spin_unlock_irq(&desc->lock); - } - up(&probe_sem); - - return mask & val; -} - -/* - * Return the one interrupt that triggered (this can - * handle any interrupt source). - */ - -/** - * probe_irq_off - end an interrupt autodetect - * @val: mask of potential interrupts (unused) - * - * Scans the unused interrupt lines and returns the line which - * appears to have triggered the interrupt. If no interrupt was - * found then zero is returned. If more than one interrupt is - * found then minus the first candidate is returned to indicate - * their is doubt. - * - * The interrupt probe logic state is returned to its previous - * value. - * - * BUGS: When used in a module (which arguably shouldnt happen) - * nothing prevents two IRQ probe callers from overlapping. The - * results of this are non-optimal. - */ - -int probe_irq_off(unsigned long val) -{ - int i, irq_found, nr_irqs; - - nr_irqs = 0; - irq_found = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - if (!(status & IRQ_WAITING)) { - if (!nr_irqs) - irq_found = i; - nr_irqs++; - } - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } - spin_unlock_irq(&desc->lock); - } - up(&probe_sem); - - if (nr_irqs > 1) - irq_found = -irq_found; - return irq_found; -} - -EXPORT_SYMBOL(probe_irq_off); - -/* this was setup_x86_irq but it seems pretty generic */ -int setup_irq(unsigned int irq, struct irqaction * new) -{ - int shared = 0; - unsigned long flags; - struct irqaction *old, **p; - irq_desc_t *desc = irq_desc + irq; - - /* - * Some drivers like serial.c use request_irq() heavily, - * so we have to be careful not to interfere with a - * running system. - */ - if (new->flags & SA_SAMPLE_RANDOM) { - /* - * This function might sleep, we want to call it first, - * outside of the atomic block. - * Yes, this might clear the entropy pool if the wrong - * driver is attempted to be loaded, without actually - * installing a new handler, but is this really a problem, - * only the sysadmin is able to do this. - */ - rand_initialize_irq(irq); - } - - /* - * The following block of code has to be executed atomically - */ - spin_lock_irqsave(&desc->lock,flags); - p = &desc->action; - if ((old = *p) != NULL) { - /* Can't share interrupts unless both agree to */ - if (!(old->flags & new->flags & SA_SHIRQ)) { - spin_unlock_irqrestore(&desc->lock,flags); - return -EBUSY; - } - - /* add new interrupt at end of irq queue */ - do { - p = &old->next; - old = *p; - } while (old); - shared = 1; - } - - *p = new; - - if (!shared) { - desc->depth = 0; - desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS); - desc->handler->startup(irq); - } - spin_unlock_irqrestore(&desc->lock,flags); - - /* register_irq_proc(irq); */ - return 0; -} - /* Initialize irq handling for IRQs. BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL to IRQ_TYPE. An IRQ_TYPE of 0 means to use a generic interrupt type. */ @@ -741,9 +121,3 @@ init_irq_handlers (int base_irq, int num, int interval, base_irq += interval; } } - -#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) -void init_irq_proc(void) -{ -} -#endif /* CONFIG_PROC_FS && CONFIG_SYSCTL */ diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h index 4f913bccbefb..d98488cd5af1 100644 --- a/include/asm-v850/hardirq.h +++ b/include/asm-v850/hardirq.h @@ -24,4 +24,6 @@ typedef struct { # error HARDIRQ_BITS is too low! #endif +void ack_bad_irq(unsigned int irq); + #endif /* __V850_HARDIRQ_H__ */ From 400bb2369df481abae5aa801e63e70008e15fba5 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Tue, 15 Nov 2005 00:09:20 -0800 Subject: [PATCH 033/169] [PATCH] cciss_scsi warning fix drivers/block/cciss_scsi.c:264: warning: `print_bytes' defined but not used drivers/block/cciss_scsi.c:298: warning: `print_cmd' defined but not used Signed-off-by: Grant Coady Acked-by: Mike Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 3226aa11c6ef..2942d32280a5 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -255,7 +255,7 @@ scsi_cmd_stack_free(int ctlr) #define DEVICETYPE(n) (n<0 || n>MAX_SCSI_DEVICE_CODE) ? \ "Unknown" : scsi_device_types[n] -#if 1 +#if 0 static int xmargin=8; static int amargin=60; From 1d193f4f112b9d8855ba1339fa784ee95f25b9c7 Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Tue, 15 Nov 2005 00:09:21 -0800 Subject: [PATCH 034/169] [PATCH] Update location of ll_rw_blk.c in docs Picked from the ubuntu-2.6 tree The change in location for ll_rw_blk.c from drivers/block/ to block/ caused failure to generate documentation. Signed-off-by: Ben Collins Cc: Jeff Garzik Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DocBook/kernel-api.tmpl | 2 +- Documentation/block/biodoc.txt | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 0519c9dc0065..096aed62c326 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -386,7 +386,7 @@ X!Edrivers/pnp/system.c Block Devices -!Edrivers/block/ll_rw_blk.c +!Eblock/ll_rw_blk.c diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 2d65c2182161..0fe01c805480 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -1063,8 +1063,8 @@ Aside: 4.4 I/O contexts I/O contexts provide a dynamically allocated per process data area. They may be used in I/O schedulers, and in the block layer (could be used for IO statis, -priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and -as-iosched.c for an example of usage in an i/o scheduler. +priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c +for an example of usage in an i/o scheduler. 5. Scalability related changes From e1f1def6ef3f0c71d0df302c3759f6937adaf9ae Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 15 Nov 2005 00:09:24 -0800 Subject: [PATCH 035/169] [PATCH] oops-tracing: mention extended VGA Something I've found handy countless times when users do this.. Signed-off-by: Dave Jones Acked-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/oops-tracing.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt index 9f30ac6ca47b..05960f8a748e 100644 --- a/Documentation/oops-tracing.txt +++ b/Documentation/oops-tracing.txt @@ -32,7 +32,10 @@ the disk is not available then you have three options :- has restarted. Messy but it is the only option if you have not planned for a crash. Alternatively, you can take a picture of the screen with a digital camera - not nice, but better than - nothing. + nothing. If the messages scroll off the top of the console, you + may find that booting with a higher resolution (eg, vga=791) + will allow you to read more of the text. (Caveat: This needs vesafb, + so won't help for 'early' oopses) (2) Boot with a serial console (see Documentation/serial-console.txt), run a null modem to a second machine and capture the output there From 9f68a24853dd37d18f2cfa979cf4e131f5a10e8f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 15 Nov 2005 14:03:47 -0500 Subject: [PATCH 036/169] [libata ahci] command completion fixes, improved debug msgs - Fix a regression in command completion, which prevented the restart of the DMA engine after the device throws an error. - Pack more hardware info into the port-reset error message. - Promote "welcome to our timeout" message from debug msg to normal printk. --- drivers/scsi/ahci.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c710a7def7a7..894e7113e0b3 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -565,6 +565,17 @@ static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) u32 tmp; int work; + printk(KERN_WARNING "ata%u: port reset, " + "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", + ap->id, + irq_stat, + readl(mmio + HOST_IRQ_STAT), + readl(port_mmio + PORT_IRQ_STAT), + readl(port_mmio + PORT_CMD), + readl(port_mmio + PORT_TFDATA), + readl(port_mmio + PORT_SCR_STAT), + readl(port_mmio + PORT_SCR_ERR)); + /* stop DMA */ tmp = readl(port_mmio + PORT_CMD); tmp &= ~PORT_CMD_START; @@ -602,13 +613,6 @@ static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) tmp |= PORT_CMD_START; writel(tmp, port_mmio + PORT_CMD); readl(port_mmio + PORT_CMD); /* flush */ - - printk(KERN_WARNING "ata%u: error occurred, port reset (%s%s%s%s)\n", - ap->id, - irq_stat & PORT_IRQ_TF_ERR ? "taskf " : "", - irq_stat & PORT_IRQ_HBUS_ERR ? "hbus " : "", - irq_stat & PORT_IRQ_HBUS_DATA_ERR ? "hbus_data " : "", - irq_stat & PORT_IRQ_IF_ERR ? "if " : ""); } static void ahci_eng_timeout(struct ata_port *ap) @@ -619,7 +623,7 @@ static void ahci_eng_timeout(struct ata_port *ap) struct ata_queued_cmd *qc; unsigned long flags; - DPRINTK("ENTER\n"); + printk(KERN_WARNING "ata%u: handling error/timeout\n", ap->id); spin_lock_irqsave(&host_set->lock, flags); @@ -672,8 +676,9 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) else err_mask = AC_ERR_HOST_BUS; - if (err_mask != AC_ERR_DEV) - ahci_intr_error(ap, status); + /* command processing has stopped due to error; restart */ + ahci_intr_error(ap, status); + if (qc) ata_qc_complete(qc, err_mask); } From 72724382d3c9caab1d85e54080d338b854f10dd3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 15 Nov 2005 19:04:22 +0000 Subject: [PATCH 037/169] [ARM] Initialise SA1111 core before SA1111 PCMCIA This avoids a BUG_ON with kref.c when SA1111 tries to register a driver with an unregistered bus type. Signed-off-by: Russell King --- arch/arm/common/sa1111.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 7b07acb03f3b..39a6eea300a2 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1266,7 +1266,7 @@ static void __exit sa1111_exit(void) bus_unregister(&sa1111_bus_type); } -module_init(sa1111_init); +subsys_initcall(sa1111_init); module_exit(sa1111_exit); MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); From 31f3426904e066f17e3f88c468a2f7c869ad4aac Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 15 Nov 2005 15:17:10 -0800 Subject: [PATCH 038/169] [TCP]: More spelling fixes. From Joe Perches Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/net/tcp.h | 4 ++-- net/ipv4/tcp_input.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 0f9848011972..d78025f9fbea 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -552,8 +552,8 @@ extern u32 __tcp_select_window(struct sock *sk); /* TCP timestamps are only 32-bits, this causes a slight * complication on 64-bit systems since we store a snapshot - * of jiffies in the buffer control blocks below. We decidedly - * only use of the low 32-bits of jiffies and hide the ugly + * of jiffies in the buffer control blocks below. We decided + * to use only the low 32-bits of jiffies and hide the ugly * casts with the following macro. */ #define tcp_time_stamp ((__u32)(jiffies)) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 40a26b7157b4..bf2e23086bce 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -367,7 +367,7 @@ static void tcp_rcv_rtt_update(struct tcp_sock *tp, u32 sample, int win_dep) * are stalled on filesystem I/O. * * Also, since we are only going for a minimum in the - * non-timestamp case, we do not smoother things out + * non-timestamp case, we do not smooth things out * else with timestamps disabled convergence takes too * long. */ @@ -546,7 +546,7 @@ static void tcp_rtt_estimator(struct sock *sk, const __u32 mrtt) * * Funny. This algorithm seems to be very broken. * These formulae increase RTO, when it should be decreased, increase - * too slowly, when it should be increased fastly, decrease too fastly + * too slowly, when it should be increased quickly, decrease too quickly * etc. I guess in BSD RTO takes ONE value, so that it is absolutely * does not matter how to _calculate_ it. Seems, it was trap * that VJ failed to avoid. 8) From 1e185b97b4364063f1135604b87f8d8469944233 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Tue, 15 Nov 2005 14:37:05 -0800 Subject: [PATCH 039/169] [PATCH] ia64: cpu_idle performance bug fix Our performance validation on 2.6.15-rc1 caught a disastrous performance regression on ia64 with netperf (-98%) and volanomark (-58%) compares to previous kernel version 2.6.14-git7. See the following chart (result group 1 & 2). http://kernel-perf.sourceforge.net/results.machine_id=26.html We have root caused it to commit 64c7c8f88559624abdbe12b5da6502e8879f8d28 This changeset broke the ia64 task resched notification. In sched.c:resched_task(), a reschedule IPI is conditioned upon TIF_POLLING_NRFLAG. However, the above changeset unconditionally set the polling thread flag for idle tasks regardless whether pal_halt_light is in use or not. As a result, resched IPI is not sent from resched_task(). And since the default behavior on ia64 is to use pal_halt_light, we end up delaying the rescheduling task until next timer tick, and thus cause the performance regression. This fixes the performance bug. I'm glad our performance suite is turning up bad performance bug like this in time. Signed-off-by: Ken Chen Signed-off-by: Linus Torvalds --- arch/ia64/kernel/process.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index e92ea64d8040..4305d2ba76f6 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -202,12 +202,9 @@ default_idle (void) { local_irq_enable(); while (!need_resched()) { - if (can_do_pal_halt) { - local_irq_disable(); - if (!need_resched()) - safe_halt(); - local_irq_enable(); - } else + if (can_do_pal_halt) + safe_halt(); + else cpu_relax(); } } @@ -272,10 +269,14 @@ cpu_idle (void) { void (*mark_idle)(int) = ia64_mark_idle; int cpu = smp_processor_id(); - set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while (1) { + if (can_do_pal_halt) + clear_thread_flag(TIF_POLLING_NRFLAG); + else + set_thread_flag(TIF_POLLING_NRFLAG); + if (!need_resched()) { void (*idle)(void); #ifdef CONFIG_SMP From 96479376c89e5be92c85bd350e3e2e8f0e7e3b52 Mon Sep 17 00:00:00 2001 From: KOVACS Krisztian Date: Tue, 15 Nov 2005 16:47:09 -0800 Subject: [PATCH 040/169] [NETFILTER] Remove nf_conntrack stat proc file when cleaning up Fix nf_conntrack statistics proc file removal. Looks like the old bug was forward-ported from ip_conntrack. :-] Signed-off-by: KOVACS Krisztian Signed-off-by: Harald Welte Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_standalone.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 45224db4fe2f..5af381f9fe3d 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -694,7 +694,7 @@ static int init_or_cleanup(int init) cleanup_proc_stat: #endif #ifdef CONFIG_PROC_FS - proc_net_remove("nf_conntrack_stat"); + remove_proc_entry("nf_conntrack", proc_net_stat); cleanup_proc_exp: proc_net_remove("nf_conntrack_expect"); cleanup_proc: From 5a6f294e43e432bd207a702fea49ebb303ef9b23 Mon Sep 17 00:00:00 2001 From: KOVACS Krisztian Date: Tue, 15 Nov 2005 16:47:34 -0800 Subject: [PATCH 041/169] [NETFILTER] Free layer-3 specific protocol tables at cleanup Although the comment around the allocation code tells us that the layer-3 specific protocol tables will be freed when cleaning up, they aren't. And this makes nfsim complain loudly... Signed-off-by: KOVACS Krisztian Signed-off-by: Harald Welte Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 9a67c796b385..ea094b231d62 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1395,6 +1395,13 @@ void nf_conntrack_cleanup(void) kmem_cache_destroy(nf_conntrack_expect_cachep); free_conntrack_hash(nf_conntrack_hash, nf_conntrack_vmalloc, nf_conntrack_htable_size); + + /* free l3proto protocol tables */ + for (i = 0; i < PF_MAX; i++) + if (nf_ct_protos[i]) { + kfree(nf_ct_protos[i]); + nf_ct_protos[i] = NULL; + } } static struct list_head *alloc_hashtable(int size, int *vmalloced) From fb6d73d3014babb69f5cc2d1d78b31e9d09fc5df Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 16 Nov 2005 11:43:26 +1100 Subject: [PATCH 042/169] [PATCH] powerpc: Fix sparsemem with memory holes [was Re: ppc64 oops..] This patch should fix the crashes we have been seeing on 64-bit powerpc systems with a memory hole when sparsemem is enabled. I'd appreciate it if people who know more about NUMA and sparsemem than me could look over it. There were two bugs. The first was that if NUMA was enabled but there was no NUMA information for the machine, the setup_nonnuma() function was adding a single region, assuming memory was contiguous. The second was that the loops in mem_init() and show_mem() assumed that all pages within the span of a pgdat were valid (had a valid struct page). I also fixed the incorrect setting of num_physpages that Mike Kravetz pointed out. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/powerpc/mm/mem.c | 8 ++++++-- arch/powerpc/mm/numa.c | 5 ++++- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index e2c95fcb8055..4bd7b0a70996 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -200,6 +200,8 @@ void show_mem(void) unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); total++; if (PageHighMem(page)) @@ -336,7 +338,7 @@ void __init mem_init(void) struct page *page; unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; - num_physpages = max_pfn; /* RAM is assumed contiguous */ + num_physpages = lmb.memory.size >> PAGE_SHIFT; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); #ifdef CONFIG_NEED_MULTIPLE_NODES @@ -348,11 +350,13 @@ void __init mem_init(void) } } #else - max_mapnr = num_physpages; + max_mapnr = max_pfn; totalram_pages += free_all_bootmem(); #endif for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); if (PageReserved(page)) reservedpages++; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index bd2cf1336885..f72cf87364cb 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -483,6 +483,7 @@ static void __init setup_nonnuma(void) { unsigned long top_of_ram = lmb_end_of_DRAM(); unsigned long total_ram = lmb_phys_mem_size(); + unsigned int i; printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); @@ -490,7 +491,9 @@ static void __init setup_nonnuma(void) (top_of_ram - total_ram) >> 20); map_cpu_to_node(boot_cpuid, 0); - add_region(0, 0, lmb_end_of_DRAM() >> PAGE_SHIFT); + for (i = 0; i < lmb.memory.cnt; ++i) + add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT, + lmb_size_pages(&lmb.memory, i)); node_set_online(0); } From eb07d964b4491d1bb5864cd3d7e7633ccdda9a53 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Mon, 14 Nov 2005 05:38:31 -0200 Subject: [PATCH 043/169] [PATCH] ppc32 8xx: update_mmu_cache() needs unconditional tlbie Currently 8xx fails to boot due to endless pagefaults. Seems the bug is exposed by the change which avoids flushing the TLB when not necessary (in case the pte has not changed), introduced recently: __handle_mm_fault(): entry = pte_mkyoung(entry); if (!pte_same(old_entry, entry)) { ptep_set_access_flags(vma, address, pte, entry, write_access); update_mmu_cache(vma, address, entry); lazy_mmu_prot_update(entry); } else { /* * This is needed only for protection faults but the arch code * is not yet telling us if this is a protection fault or not. * This still avoids useless tlb flushes for .text page faults * with threads. */ if (write_access) flush_tlb_page(vma, address); } The "update_mmu_cache()" call was unconditional before, which caused the TLB to be flushed by: if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { if (vma->vm_mm == current->active_mm) { #ifdef CONFIG_8xx /* On 8xx, cache control instructions (particularly * "dcbst" from flush_dcache_icache) fault as write * operation if there is an unpopulated TLB entry * for the address in question. To workaround that, * we invalidate the TLB here, thus avoiding dcbst * misbehaviour. */ _tlbie(address); #endif __flush_dcache_icache((void *) address); } else flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } Which worked to due to pure luck: PG_arch_1 was always unset before, but now it isnt. The root of the problem are the changes against the 8xx TLB handlers introduced during v2.6. What happens is the TLBMiss handlers load the zeroed pte into the TLB, causing the TLBError handler to be invoked (thats two TLB faults per pagefault), which then jumps to the generic MM code to setup the pte. The bug is that the zeroed TLB is not invalidated (the same reason for the "dcbst" misbehaviour), resulting in infinite TLBError faults. The "two exception" approach requires a TLB flush (to nuke the zeroed TLB) at each PTE update for correct behaviour: Signed-off-by: Marcelo Tosatti Signed-off-by: Paul Mackerras --- arch/ppc/mm/init.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 99b48abd3296..45f0782059f1 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -597,21 +597,20 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); - if (!PageReserved(page) - && !test_bit(PG_arch_1, &page->flags)) { - if (vma->vm_mm == current->active_mm) { #ifdef CONFIG_8xx - /* On 8xx, cache control instructions (particularly - * "dcbst" from flush_dcache_icache) fault as write - * operation if there is an unpopulated TLB entry - * for the address in question. To workaround that, - * we invalidate the TLB here, thus avoiding dcbst - * misbehaviour. - */ - _tlbie(address); + /* On 8xx, the TLB handlers work in 2 stages: + * First, a zeroed entry is loaded by TLBMiss handler, + * which causes the TLBError handler to be triggered. + * That means the zeroed TLB has to be invalidated + * whenever a page miss occurs. + */ + _tlbie(address); #endif + if (!PageReserved(page) + && !test_bit(PG_arch_1, &page->flags)) { + if (vma->vm_mm == current->active_mm) __flush_dcache_icache((void *) address); - } else + else flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } From 5444a5e9e872f599ec12534bd1bf9bc79a1c72ca Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2005 14:40:25 +1100 Subject: [PATCH 044/169] [PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 175 ++++++++++++++++--------- arch/powerpc/configs/g5_defconfig | 53 +++++--- arch/powerpc/configs/iseries_defconfig | 159 +++++++++++++++------- arch/powerpc/configs/maple_defconfig | 155 ++++++++++++++-------- arch/powerpc/configs/pseries_defconfig | 4 +- 5 files changed, 361 insertions(+), 185 deletions(-) diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 67ffecbc05cb..4b433411b9e3 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:36:20 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 # # Code maturity level options @@ -66,31 +81,69 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_CELL=y CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y # CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_MMIO_NVRAM=y +CONFIG_CELL_IIC=y +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -98,30 +151,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -136,6 +180,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -183,6 +228,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -284,6 +333,10 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -345,14 +398,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -442,6 +487,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -495,7 +541,6 @@ CONFIG_SKGE=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -625,7 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -633,6 +678,8 @@ CONFIG_WATCHDOG_RTAS=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -649,6 +696,7 @@ CONFIG_WATCHDOG_RTAS=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -699,6 +747,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -756,6 +805,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -943,9 +996,24 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -962,13 +1030,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1008,17 +1077,3 @@ CONFIG_CRYPTO_DEFLATE=m # # Hardware crypto devices # - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index e76854f8c121..e7c23e3902b8 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14 -# Mon Nov 7 13:37:59 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:39:20 2005 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -82,6 +82,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Platform support # @@ -137,6 +154,7 @@ CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -144,7 +162,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -215,6 +233,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -382,19 +404,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ATA_OVER_ETH is not set # @@ -656,7 +665,6 @@ CONFIG_SUNGEM=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -# CONFIG_FEC_8XX is not set # # Ethernet (1000 Mbit) @@ -710,6 +718,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -804,6 +813,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -917,7 +928,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -932,6 +942,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set @@ -950,7 +961,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -959,6 +969,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1474,10 +1485,11 @@ CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m # -# Profiling support +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1497,7 +1509,6 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 62e92c7e9e27..5d0866707a75 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:09 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -68,22 +83,60 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_ISERIES=y # CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_ISERIES=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 +CONFIG_IRQ_ALL_CPUS=y +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -91,26 +144,20 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -125,6 +172,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -166,6 +214,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -265,6 +317,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -326,14 +382,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -377,6 +425,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -454,6 +503,7 @@ CONFIG_DM_ZERO=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -561,6 +611,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -643,6 +694,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -660,6 +713,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -712,6 +766,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -917,10 +975,25 @@ CONFIG_VIOTAPE=m CONFIG_VIOPATH=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -937,11 +1010,11 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y # @@ -982,17 +1055,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 7b480f3d1406..92e42613ef06 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,18 +1,32 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:58 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 # # Code maturity level options @@ -67,32 +81,67 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y CONFIG_U3_DART=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -100,27 +149,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -135,6 +178,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -193,6 +237,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -254,14 +302,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -351,6 +391,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -533,6 +574,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -549,6 +592,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -599,6 +643,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -681,12 +726,15 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -776,6 +824,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set @@ -985,9 +1034,19 @@ CONFIG_NLS_DEFAULT="utf-8" CONFIG_NLS_UTF8=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1004,14 +1063,15 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set # CONFIG_IRQSTACKS is not set +CONFIG_BOOTX_TEXT=y # # Security options @@ -1051,12 +1111,3 @@ CONFIG_CRYPTO_DES=y # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 913962c1dae0..b4745c918a4a 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.15-rc1 -# Mon Nov 14 15:27:00 2005 +# Tue Nov 15 14:36:55 2005 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -144,7 +144,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y -# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y CONFIG_SCANLOG=m From eb481899aa319cf5cbeccfd9deac907300698b57 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 15 Nov 2005 14:49:22 +1100 Subject: [PATCH 045/169] [PATCH] powerpc: Fixup debugging in lmb.c Somewhere we lost the include of udbg.h in lmb.c. While we're there, add a DBG macro like every other file has and use it in lmb_dump_all(). Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/lmb.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 9b5aa6808eb8..9584608fd768 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -22,35 +22,38 @@ #include "mmu_decl.h" /* for __max_low_memory */ #endif -struct lmb lmb; - #undef DEBUG +#ifdef DEBUG +#include +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +struct lmb lmb; + void lmb_dump_all(void) { #ifdef DEBUG unsigned long i; - udbg_printf("lmb_dump_all:\n"); - udbg_printf(" memory.cnt = 0x%lx\n", - lmb.memory.cnt); - udbg_printf(" memory.size = 0x%lx\n", - lmb.memory.size); + DBG("lmb_dump_all:\n"); + DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt); + DBG(" memory.size = 0x%lx\n", lmb.memory.size); for (i=0; i < lmb.memory.cnt ;i++) { - udbg_printf(" memory.region[0x%x].base = 0x%lx\n", + DBG(" memory.region[0x%x].base = 0x%lx\n", i, lmb.memory.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.memory.region[i].size); } - udbg_printf("\n reserved.cnt = 0x%lx\n", - lmb.reserved.cnt); - udbg_printf(" reserved.size = 0x%lx\n", - lmb.reserved.size); + DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt); + DBG(" reserved.size = 0x%lx\n", lmb.reserved.size); for (i=0; i < lmb.reserved.cnt ;i++) { - udbg_printf(" reserved.region[0x%x].base = 0x%lx\n", + DBG(" reserved.region[0x%x].base = 0x%lx\n", i, lmb.reserved.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.reserved.region[i].size); } #endif /* DEBUG */ From f9e4ec57c66586d0c165ed9373efaf9e329d5766 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 15 Nov 2005 15:16:38 +1100 Subject: [PATCH 046/169] [PATCH] powerpc: More debugging fixups Add a few more missing includes of udbg.h Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 2 +- arch/powerpc/kernel/setup-common.c | 1 + arch/powerpc/kernel/smp.c | 7 ++++--- arch/powerpc/platforms/pseries/smp.c | 1 + 4 files changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 3cef1b8f57f0..d7de3ec0bf83 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -30,10 +30,10 @@ #include #include #include -#include #include #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 33e7f2c7f194..bd3eb4292b53 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -59,6 +59,7 @@ #undef DEBUG #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 62dfc5b8d765..30374d2f88e5 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -49,15 +49,16 @@ #include #endif -int smp_hw_index[NR_CPUS]; -struct thread_info *secondary_ti; - #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; + cpumask_t cpu_possible_map = CPU_MASK_NONE; cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 5800cde7d5ad..25181c594d73 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -51,6 +51,7 @@ #include "plpar_wrappers.h" #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) From b5166cc252190be80465f3b4f050e4a0310f71af Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2005 16:05:33 +1100 Subject: [PATCH 047/169] [PATCH] powerpc: pci_64 fixes & cleanups I discovered that in some cases (PowerMac for example) we wouldn't properly map the PCI IO space on recent kernels. In addition, the code for initializing PCI host bridges was scattered all over the place with some duplication between platforms. This patch fixes the problem and does a small cleanup by creating a pcibios_alloc_controller() in pci_64.c that is similar to the one in pci_32.c (just takes an additional device node argument) that takes care of all the grunt allocation and initialisation work. It should work for both boot time and dynamically allocated PHBs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 68 +++++++++++++++++++++++++-- arch/powerpc/kernel/rtas_pci.c | 68 ++------------------------- arch/powerpc/platforms/iseries/pci.c | 3 +- arch/powerpc/platforms/maple/pci.c | 16 +------ arch/powerpc/platforms/powermac/pci.c | 62 ++++++++++++------------ include/asm-powerpc/ppc-pci.h | 1 - include/asm-ppc64/pci-bridge.h | 14 ++++-- 7 files changed, 114 insertions(+), 118 deletions(-) diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index d7de3ec0bf83..5a5b24685081 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -187,7 +187,7 @@ static DEFINE_SPINLOCK(hose_spinlock); /* * pci_controller(phb) initialized common variables. */ -void __devinit pci_setup_pci_controller(struct pci_controller *hose) +static void __devinit pci_setup_pci_controller(struct pci_controller *hose) { memset(hose, 0, sizeof(struct pci_controller)); @@ -197,6 +197,65 @@ void __devinit pci_setup_pci_controller(struct pci_controller *hose) spin_unlock(&hose_spinlock); } +static void add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb) +{ + struct property *of_prop; + unsigned int size; + + of_prop = (struct property *) + get_property(dev, "linux,pci-domain", &size); + if (of_prop != NULL) + return; + WARN_ON(of_prop && size < sizeof(int)); + if (of_prop && size < sizeof(int)) + of_prop = NULL; + size = sizeof(struct property) + sizeof(int); + if (of_prop == NULL) { + if (mem_init_done) + of_prop = kmalloc(size, GFP_KERNEL); + else + of_prop = alloc_bootmem(size); + } + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(int); + of_prop->value = (unsigned char *)&of_prop[1]; + *((int *)of_prop->value) = phb->global_number; + prom_add_property(dev, of_prop); +} + +struct pci_controller * pcibios_alloc_controller(struct device_node *dev) +{ + struct pci_controller *phb; + + if (mem_init_done) + phb = kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + else + phb = alloc_bootmem(sizeof (struct pci_controller)); + if (phb == NULL) + return NULL; + pci_setup_pci_controller(phb); + phb->arch_data = dev; + phb->is_dynamic = mem_init_done; + if (dev) + add_linux_pci_domain(dev, phb); + return phb; +} + +void pcibios_free_controller(struct pci_controller *phb) +{ + if (phb->arch_data) { + struct device_node *np = phb->arch_data; + int *domain = (int *)get_property(np, + "linux,pci-domain", NULL); + if (domain) + *domain = -1; + } + if (phb->is_dynamic) + kfree(phb); +} + static void __init pcibios_claim_one_bus(struct pci_bus *b) { struct pci_dev *dev; @@ -907,9 +966,10 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, * (size depending on dev->n_addr_cells) * cells 4+5 or 5+6: the size of the range */ - rlen = 0; - hose->io_base_phys = 0; ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + if (ranges == NULL) + return; + hose->io_base_phys = 0; while ((rlen -= np * sizeof(unsigned int)) >= 0) { res = NULL; pci_space = ranges[0]; @@ -1107,6 +1167,8 @@ int remap_bus_range(struct pci_bus *bus) if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) return 1; + if (start_phys == 0) + return 1; printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); if (__ioremap_explicit(start_phys, start_virt, size, _PAGE_NO_CACHE | _PAGE_GUARDED)) diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 0e5a8e116653..60dec2401c26 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -304,75 +304,18 @@ static int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb, unsigned int addr_size_words) { - pci_setup_pci_controller(phb); - if (is_python(dev)) python_countermeasures(dev, addr_size_words); if (phb_set_bus_ranges(dev, phb)) return 1; - phb->arch_data = dev; phb->ops = &rtas_pci_ops; phb->buid = get_phb_buid(dev); return 0; } -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - unsigned long __init find_and_init_phbs(void) { struct device_node *node; @@ -397,10 +340,10 @@ unsigned long __init find_and_init_phbs(void) if (node->type == NULL || strcmp(node->type, "pci") != 0) continue; - phb = alloc_phb(node, root_size_cells); + phb = pcibios_alloc_controller(node); if (!phb) continue; - + setup_phb(node, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, node, 0); pci_setup_phb_io(phb, index == 0); #ifdef CONFIG_PPC_PSERIES @@ -446,10 +389,10 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) root_size_cells = prom_n_size_cells(root); primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); + phb = pcibios_alloc_controller(dn); if (!phb) return NULL; - + setup_phb(dn, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, dn, primary); pci_setup_phb_io_dynamic(phb, primary); @@ -505,8 +448,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb) } list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); + pcibios_free_controller(phb); return 0; } diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 4b75131773a6..dafc518fbb83 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -244,10 +244,9 @@ unsigned long __init find_and_init_phbs(void) if (ret == 0) { printk("bus %d appears to exist\n", bus); - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + phb = pcibios_alloc_controller(NULL); if (phb == NULL) return -ENOMEM; - pci_setup_pci_controller(phb); phb->pci_mem_offset = phb->local_number = bus; phb->first_busno = bus; diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 895aeb3f75d0..f40451da037c 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -326,26 +326,12 @@ static int __init add_bridge(struct device_node *dev) dev->full_name); } - hose = alloc_bootmem(sizeof(struct pci_controller)); + hose = pcibios_alloc_controller(dev); if (hose == NULL) return -ENOMEM; - pci_setup_pci_controller(hose); - - hose->arch_data = dev; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(hose->global_number)); - if (of_prop) { - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(hose->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); - prom_add_property(dev, of_prop); - } - disp_name = NULL; if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index dfd41b9781a9..443be526cde7 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -640,15 +640,16 @@ static void __init setup_u3_ht(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, + 0x02000000); /* - * /ht node doesn't expose a "ranges" property, so we "remove" regions that - * have been allocated to AGP. So far, this version of the code doesn't assign - * any of the 0xfxxxxxxx "fine" memory regions to /ht. - * We need to fix that sooner or later by either parsing all child "ranges" - * properties or figuring out the U3 address space decoding logic and - * then read its configuration register (if any). + * /ht node doesn't expose a "ranges" property, so we "remove" + * regions that have been allocated to AGP. So far, this version of + * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions + * to /ht. We need to fix that sooner or later by either parsing all + * child "ranges" properties or figuring out the U3 address space + * decoding logic and then read its configuration register (if any). */ hose->io_base_phys = 0xf4000000; hose->pci_io_size = 0x00400000; @@ -671,10 +672,10 @@ static void __init setup_u3_ht(struct pci_controller* hose) return; } - /* We "remove" the AGP resources from the resources allocated to HT, that - * is we create "holes". However, that code does assumptions that so far - * happen to be true (cross fingers...), typically that resources in the - * AGP node are properly ordered + /* We "remove" the AGP resources from the resources allocated to HT, + * that is we create "holes". However, that code does assumptions + * that so far happen to be true (cross fingers...), typically that + * resources in the AGP node are properly ordered */ cur = 0; for (i=0; i<3; i++) { @@ -684,23 +685,30 @@ static void __init setup_u3_ht(struct pci_controller* hose) /* We don't care about "fine" resources */ if (res->start >= 0xf0000000) continue; - /* Check if it's just a matter of "shrinking" us in one direction */ + /* Check if it's just a matter of "shrinking" us in one + * direction + */ if (hose->mem_resources[cur].start == res->start) { DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].start, res->end + 1); + cur, hose->mem_resources[cur].start, + res->end + 1); hose->mem_resources[cur].start = res->end + 1; continue; } if (hose->mem_resources[cur].end == res->end) { DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].end, res->start - 1); + cur, hose->mem_resources[cur].end, + res->start - 1); hose->mem_resources[cur].end = res->start - 1; continue; } /* No, it's not the case, we need a hole */ if (cur == 2) { - /* not enough resources for a hole, we drop part of the range */ - printk(KERN_WARNING "Running out of resources for /ht host !\n"); + /* not enough resources for a hole, we drop part + * of the range + */ + printk(KERN_WARNING "Running out of resources" + " for /ht host !\n"); hose->mem_resources[cur].end = res->start - 1; continue; } @@ -714,17 +722,6 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->mem_resources[cur-1].end = res->start - 1; } } - -/* XXX this needs to be converged between ppc32 and ppc64... */ -static struct pci_controller * __init pcibios_alloc_controller(void) -{ - struct pci_controller *hose; - - hose = alloc_bootmem(sizeof(struct pci_controller)); - if (hose) - pci_setup_pci_controller(hose); - return hose; -} #endif /* @@ -756,11 +753,16 @@ static int __init add_bridge(struct device_node *dev) #endif bus_range = (int *) get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); } + /* XXX Different prototypes, to be merged */ +#ifdef CONFIG_PPC64 + hose = pcibios_alloc_controller(dev); +#else hose = pcibios_alloc_controller(); +#endif if (!hose) return -ENOMEM; hose->arch_data = dev; @@ -768,7 +770,7 @@ static int __init add_bridge(struct device_node *dev) hose->last_busno = bus_range ? bus_range[1] : 0xff; disp_name = NULL; -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); disp_name = "U3-AGP"; diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 9896fade98a7..2e36e5a7f4f3 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -14,7 +14,6 @@ extern unsigned long isa_io_base; -extern void pci_setup_pci_controller(struct pci_controller *hose); extern void pci_setup_phb_io(struct pci_controller *hose, int primary); extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); diff --git a/include/asm-ppc64/pci-bridge.h b/include/asm-ppc64/pci-bridge.h index efbdaece0cf0..cf04327a597a 100644 --- a/include/asm-ppc64/pci-bridge.h +++ b/include/asm-ppc64/pci-bridge.h @@ -61,12 +61,14 @@ struct pci_dn { int busno; /* for pci devices */ int bussubno; /* for pci devices */ int devfn; /* for pci devices */ + +#ifdef CONFIG_PPC_PSERIES int eeh_mode; /* See eeh.h for possible EEH_MODEs */ int eeh_config_addr; int eeh_check_count; /* # times driver ignored error */ int eeh_freeze_count; /* # times this device froze up. */ int eeh_is_bridge; /* device is pci-to-pci bridge */ - +#endif int pci_ext_config_space; /* for pci devices */ struct pci_controller *phb; /* for pci devices */ struct iommu_table *iommu_table; /* for phb's or bridges */ @@ -74,9 +76,9 @@ struct pci_dn { struct device_node *node; /* back-pointer to the device_node */ #ifdef CONFIG_PPC_ISERIES struct list_head Device_List; - int Irq; /* Assigned IRQ */ - int Flags; /* Possible flags(disable/bist)*/ - u8 LogicalSlot; /* Hv Slot Index for Tces */ + int Irq; /* Assigned IRQ */ + int Flags; /* Possible flags(disable/bist)*/ + u8 LogicalSlot; /* Hv Slot Index for Tces */ #endif u32 config_space[16]; /* saved PCI config space */ }; @@ -136,6 +138,10 @@ static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) return PCI_DN(busdn)->phb; } +extern struct pci_controller * +pcibios_alloc_controller(struct device_node *dev); +extern void pcibios_free_controller(struct pci_controller *phb); + /* Return values for ppc_md.pci_probe_mode function */ #define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ #define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ From c0ce5c5228dd17d4e3dd1d15b8d52714262cab70 Mon Sep 17 00:00:00 2001 From: Guido Guenther Date: Tue, 15 Nov 2005 17:28:05 +1100 Subject: [PATCH 048/169] [PATCH] PowerBook 6,1: headphone not detected after suspend ever since suspend to disk works I had the problem that headphone (un)plugging doesn't get detected properly anymore after the first resume. Reloading the module worked around this ever since, however the real cause of the problem was that after a resume the driver only got interrupts on "unplug" not on "plug". Reactivating the headphone status interrupt in tumbler_resume fixes this. This shouldn't cause any trouble with software suspend, but it would be nice if somebody could confirm this: Signed-off-by: Guido Guenther Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- sound/ppc/tumbler.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c index 65384afcfc3f..d74bfabe5300 100644 --- a/sound/ppc/tumbler.c +++ b/sound/ppc/tumbler.c @@ -1194,8 +1194,14 @@ static void tumbler_resume(pmac_t *chip) tumbler_set_master_volume(mix); if (chip->update_automute) chip->update_automute(chip, 0); - if (mix->headphone_irq >= 0) + if (mix->headphone_irq >= 0) { + unsigned char val; + enable_irq(mix->headphone_irq); + /* activate headphone status interrupts */ + val = do_gpio_read(&mix->hp_detect); + do_gpio_write(&mix->hp_detect, val | 0x80); + } if (mix->lineout_irq >= 0) enable_irq(mix->lineout_irq); } From de93f0d62ccaa730fd46de14d46c0317bd82596a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2005 18:21:45 +1100 Subject: [PATCH 049/169] [PATCH] ppc: Fix boot with yaboot with ARCH=ppc The merge of machine types broke boot with yaboot & ARCH=ppc due to the old code still retreiving the old-syle machine type passed in by yaboot. This patch fixes it by translating those old numbers. Since that whole mecanism is deprecated, this is a temporary fix until ARCH=ppc uses the new prom_init that the merged architecture now uses for both ppc32 and ppc64 (after 2.6.15) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/ppc/kernel/setup.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index dc55e1abc45b..0eb0b7085e6a 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -602,7 +602,19 @@ void parse_bootinfo(struct bi_record *rec) #endif /* CONFIG_BLK_DEV_INITRD */ #ifdef CONFIG_PPC_MULTIPLATFORM case BI_MACHTYPE: - _machine = data[0]; + /* Machine types changed with the merge. Since the + * bootinfo are now deprecated, we can just hard code + * the appropriate conversion here for when we are + * called with yaboot which passes us a machine type + * this way. + */ + switch(data[0]) { + case 1: _machine = _MACH_prep; break; + case 2: _machine = _MACH_Pmac; break; + case 4: _machine = _MACH_chrp; break; + default: + _machine = data[0]; + } break; #endif case BI_MEMSIZE: From 950fc0025f8566d1c44da04fed216513f83268af Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 15 Nov 2005 09:05:14 -0800 Subject: [PATCH 050/169] [PATCH] powerpc: add new powerbooks to feature table Hi, The previous PowerBook patch didn't contain the feature table updates for ARCH=powerpc. Here they are. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/feature.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 10f1d942c661..0d7fa00fcb00 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2362,6 +2362,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, From 7486a38f683d49e6f8b2b9050ff06778b151a40c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 15 Nov 2005 11:03:24 -0600 Subject: [PATCH 051/169] [PATCH] powerpc: replace page_to_virt() with lowmem_page_address() for Book-E page_to_virt and lowmem_page_address provided equiavlent functionality so use the more standard lowmem_page_address This also addresses build issue in ARCH=powerpc since page_to_virt() has been removed from include/asm-powerpc/page.h Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- include/asm-ppc/pgalloc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h index 931b6de7ef53..bdefd1c4a558 100644 --- a/include/asm-ppc/pgalloc.h +++ b/include/asm-ppc/pgalloc.h @@ -28,7 +28,7 @@ extern void pgd_free(pgd_t *pgd); #define pmd_populate_kernel(mm, pmd, pte) \ (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT) #define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT) + (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT) #endif extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); From 94b212c29f685ca54b5689a8e89ac7671c43d651 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 16 Nov 2005 13:38:21 +1100 Subject: [PATCH 052/169] powerpc: Move ppc64 boot wrapper code over to arch/powerpc This also extends the code to handle 32-bit ELF vmlinux files as well as 64-bit ones. This is sufficient for booting on new-world 32-bit powermacs (i.e. all recent machines). Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 25 ++--- arch/{ppc64 => powerpc}/boot/Makefile | 5 +- arch/{ppc64 => powerpc}/boot/README | 0 arch/{ppc64 => powerpc}/boot/addRamDisk.c | 0 arch/{ppc64 => powerpc}/boot/addnote.c | 0 arch/{ppc64 => powerpc}/boot/crt0.S | 0 arch/{ppc64 => powerpc}/boot/div64.S | 0 arch/{ppc64 => powerpc}/boot/elf.h | 0 arch/{ppc64 => powerpc}/boot/install.sh | 0 arch/{ppc64 => powerpc}/boot/main.c | 122 ++++++++++++++-------- arch/{ppc64 => powerpc}/boot/page.h | 0 arch/{ppc64 => powerpc}/boot/ppc_asm.h | 0 arch/{ppc64 => powerpc}/boot/prom.c | 0 arch/{ppc64 => powerpc}/boot/prom.h | 0 arch/{ppc64 => powerpc}/boot/stdio.h | 0 arch/{ppc64 => powerpc}/boot/string.S | 0 arch/{ppc64 => powerpc}/boot/string.h | 0 arch/{ppc64 => powerpc}/boot/zImage.lds | 0 18 files changed, 91 insertions(+), 61 deletions(-) rename arch/{ppc64 => powerpc}/boot/Makefile (96%) rename arch/{ppc64 => powerpc}/boot/README (100%) rename arch/{ppc64 => powerpc}/boot/addRamDisk.c (100%) rename arch/{ppc64 => powerpc}/boot/addnote.c (100%) rename arch/{ppc64 => powerpc}/boot/crt0.S (100%) rename arch/{ppc64 => powerpc}/boot/div64.S (100%) rename arch/{ppc64 => powerpc}/boot/elf.h (100%) rename arch/{ppc64 => powerpc}/boot/install.sh (100%) rename arch/{ppc64 => powerpc}/boot/main.c (77%) rename arch/{ppc64 => powerpc}/boot/page.h (100%) rename arch/{ppc64 => powerpc}/boot/ppc_asm.h (100%) rename arch/{ppc64 => powerpc}/boot/prom.c (100%) rename arch/{ppc64 => powerpc}/boot/prom.h (100%) rename arch/{ppc64 => powerpc}/boot/stdio.h (100%) rename arch/{ppc64 => powerpc}/boot/string.S (100%) rename arch/{ppc64 => powerpc}/boot/string.h (100%) rename arch/{ppc64 => powerpc}/boot/zImage.lds (100%) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index d41ad2e675db..99dbea8c5c50 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -14,10 +14,6 @@ HAS_BIARCH := $(call cc-option-yn, -m32) -ifeq ($(CONFIG_PPC64),y) -OLDARCH := ppc64 -SZ := 64 - # Set default 32 bits cross compilers for vdso and boot wrapper CROSS32_COMPILE ?= @@ -37,6 +33,10 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +ifeq ($(CONFIG_PPC64),y) +OLDARCH := ppc64 +SZ := 64 + new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) ifeq ($(new_nm),y) @@ -139,7 +139,7 @@ drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ -defaultimage-$(CONFIG_PPC32) := uImage zImage +defaultimage-$(CONFIG_PPC32) := zImage defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux defaultimage-$(CONFIG_PPC_PSERIES) := zImage KBUILD_IMAGE := $(defaultimage-y) @@ -154,23 +154,13 @@ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm .PHONY: $(BOOT_TARGETS) -boot := arch/$(OLDARCH)/boot +boot := arch/$(ARCH)/boot -# urk -ifeq ($(CONFIG_PPC64),y) $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) -else -$(BOOT_TARGETS): vmlinux - $(Q)$(MAKE) ARCH=ppc $(build)=$(boot) $@ -endif - -uImage: vmlinux - $(Q)$(MAKE) ARCH=$(OLDARCH) $(build)=$(boot)/images $(boot)/images/$@ define archhelp - @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)' - @echo ' uImage - Create a bootable image for U-Boot / PPCBoot' + @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)' @echo ' install - Install kernel using' @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @@ -180,7 +170,6 @@ endef archclean: $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc $(Q)rm -rf arch/$(ARCH)/include archprepare: checkbin diff --git a/arch/ppc64/boot/Makefile b/arch/powerpc/boot/Makefile similarity index 96% rename from arch/ppc64/boot/Makefile rename to arch/powerpc/boot/Makefile index 301bc1536c49..9770f587af73 100644 --- a/arch/ppc64/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -22,7 +22,8 @@ HOSTCC := gcc -BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include) -fPIC +BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ + $(shell $(CROSS32CC) -print-file-name=include) -fPIC BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc BOOTLFLAGS := -T $(srctree)/$(src)/zImage.lds OBJCOPYFLAGS := contents,alloc,load,readonly,data @@ -98,7 +99,7 @@ quiet_cmd_ramdisk = RAMDISK $@ cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ quiet_cmd_stripvm = STRIP $@ - cmd_stripvm = $(STRIP) -s $< -o $@ + cmd_stripvm = $(STRIP) -s -R .comment $< -o $@ vmlinux.strip: vmlinux $(call if_changed,stripvm) diff --git a/arch/ppc64/boot/README b/arch/powerpc/boot/README similarity index 100% rename from arch/ppc64/boot/README rename to arch/powerpc/boot/README diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c similarity index 100% rename from arch/ppc64/boot/addRamDisk.c rename to arch/powerpc/boot/addRamDisk.c diff --git a/arch/ppc64/boot/addnote.c b/arch/powerpc/boot/addnote.c similarity index 100% rename from arch/ppc64/boot/addnote.c rename to arch/powerpc/boot/addnote.c diff --git a/arch/ppc64/boot/crt0.S b/arch/powerpc/boot/crt0.S similarity index 100% rename from arch/ppc64/boot/crt0.S rename to arch/powerpc/boot/crt0.S diff --git a/arch/ppc64/boot/div64.S b/arch/powerpc/boot/div64.S similarity index 100% rename from arch/ppc64/boot/div64.S rename to arch/powerpc/boot/div64.S diff --git a/arch/ppc64/boot/elf.h b/arch/powerpc/boot/elf.h similarity index 100% rename from arch/ppc64/boot/elf.h rename to arch/powerpc/boot/elf.h diff --git a/arch/ppc64/boot/install.sh b/arch/powerpc/boot/install.sh similarity index 100% rename from arch/ppc64/boot/install.sh rename to arch/powerpc/boot/install.sh diff --git a/arch/ppc64/boot/main.c b/arch/powerpc/boot/main.c similarity index 77% rename from arch/ppc64/boot/main.c rename to arch/powerpc/boot/main.c index e0dde24a72ce..64ec93116fa6 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -42,6 +42,8 @@ static struct addr_range vmlinux; static struct addr_range vmlinuz; static struct addr_range initrd; +static unsigned long elfoffset; + static char scratch[46912]; /* scratch space for gunzip, from zlib_inflate_workspacesize() */ static char elfheader[256]; @@ -131,13 +133,70 @@ static unsigned long try_claim(unsigned long size) return addr; } +static int is_elf64(void *hdr) +{ + Elf64_Ehdr *elf64 = hdr; + Elf64_Phdr *elf64ph; + unsigned int i; + + if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 && + elf64->e_ident[EI_MAG1] == ELFMAG1 && + elf64->e_ident[EI_MAG2] == ELFMAG2 && + elf64->e_ident[EI_MAG3] == ELFMAG3 && + elf64->e_ident[EI_CLASS] == ELFCLASS64 && + elf64->e_ident[EI_DATA] == ELFDATA2MSB && + elf64->e_type == ET_EXEC && + elf64->e_machine == EM_PPC64)) + return 0; + + elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) + if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) + break; + if (i >= (unsigned int)elf64->e_phnum) + return 0; + + elfoffset = (unsigned long)elf64ph->p_offset; + vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset; + vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset; + return 1; +} + +static int is_elf32(void *hdr) +{ + Elf32_Ehdr *elf32 = hdr; + Elf32_Phdr *elf32ph; + unsigned int i; + + if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 && + elf32->e_ident[EI_MAG1] == ELFMAG1 && + elf32->e_ident[EI_MAG2] == ELFMAG2 && + elf32->e_ident[EI_MAG3] == ELFMAG3 && + elf32->e_ident[EI_CLASS] == ELFCLASS32 && + elf32->e_ident[EI_DATA] == ELFDATA2MSB && + elf32->e_type == ET_EXEC && + elf32->e_machine == EM_PPC)) + return 0; + + elf32 = (Elf32_Ehdr *)elfheader; + elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); + for (i = 0; i < elf32->e_phnum; i++, elf32ph++) + if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0) + break; + if (i >= elf32->e_phnum) + return 0; + + elfoffset = elf32ph->p_offset; + vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset; + vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset; + return 1; +} + void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) { - unsigned long i; int len; kernel_entry_t kernel_entry; - Elf64_Ehdr *elf64; - Elf64_Phdr *elf64ph; memset(__bss_start, 0, _end - __bss_start); @@ -153,6 +212,22 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp); + vmlinuz.addr = (unsigned long)_vmlinux_start; + vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); + + /* gunzip the ELF header of the kernel */ + if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { + len = vmlinuz.size; + gunzip(elfheader, sizeof(elfheader), + (unsigned char *)vmlinuz.addr, &len); + } else + memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); + + if (!is_elf64(elfheader) && !is_elf32(elfheader)) { + printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); + exit(); + } + /* * The first available claim_base must be above the end of the * the loaded kernel wrapper file (_start to _end includes the @@ -172,46 +247,11 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) claim_base = PROG_START; #endif - vmlinuz.addr = (unsigned long)_vmlinux_start; - vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); - - /* gunzip the ELF header of the kernel */ - if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { - len = vmlinuz.size; - gunzip(elfheader, sizeof(elfheader), - (unsigned char *)vmlinuz.addr, &len); - } else - memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); - - elf64 = (Elf64_Ehdr *)elfheader; - if ( elf64->e_ident[EI_MAG0] != ELFMAG0 || - elf64->e_ident[EI_MAG1] != ELFMAG1 || - elf64->e_ident[EI_MAG2] != ELFMAG2 || - elf64->e_ident[EI_MAG3] != ELFMAG3 || - elf64->e_ident[EI_CLASS] != ELFCLASS64 || - elf64->e_ident[EI_DATA] != ELFDATA2MSB || - elf64->e_type != ET_EXEC || - elf64->e_machine != EM_PPC64 ) - { - printf("Error: not a valid PPC64 ELF file!\n\r"); - exit(); - } - - elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + - (unsigned long)elf64->e_phoff); - for(i=0; i < (unsigned int)elf64->e_phnum ;i++,elf64ph++) { - if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) - break; - } - vmlinux.size = (unsigned long)elf64ph->p_filesz + - (unsigned long)elf64ph->p_offset; /* We need to claim the memsize plus the file offset since gzip * will expand the header (file offset), then the kernel, then * possible rubbish we don't care about. But the kernel bss must * be claimed (it will be zero'd by the kernel itself) */ - vmlinux.memsize = (unsigned long)elf64ph->p_memsz + - (unsigned long)elf64ph->p_offset; printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); vmlinux.addr = try_claim(vmlinux.memsize); if (vmlinux.addr == 0) { @@ -254,9 +294,9 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) /* Skip over the ELF header */ #ifdef DEBUG printf("... skipping 0x%lx bytes of ELF header\n\r", - (unsigned long)elf64ph->p_offset); + elfoffset); #endif - vmlinux.addr += (unsigned long)elf64ph->p_offset; + vmlinux.addr += elfoffset; flush_cache((void *)vmlinux.addr, vmlinux.size); @@ -272,7 +312,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) (unsigned long)prom, NULL); #endif - kernel_entry( a1, a2, prom, NULL ); + kernel_entry(a1, a2, prom, NULL); printf("Error: Linux kernel returned to zImage bootloader!\n\r"); diff --git a/arch/ppc64/boot/page.h b/arch/powerpc/boot/page.h similarity index 100% rename from arch/ppc64/boot/page.h rename to arch/powerpc/boot/page.h diff --git a/arch/ppc64/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h similarity index 100% rename from arch/ppc64/boot/ppc_asm.h rename to arch/powerpc/boot/ppc_asm.h diff --git a/arch/ppc64/boot/prom.c b/arch/powerpc/boot/prom.c similarity index 100% rename from arch/ppc64/boot/prom.c rename to arch/powerpc/boot/prom.c diff --git a/arch/ppc64/boot/prom.h b/arch/powerpc/boot/prom.h similarity index 100% rename from arch/ppc64/boot/prom.h rename to arch/powerpc/boot/prom.h diff --git a/arch/ppc64/boot/stdio.h b/arch/powerpc/boot/stdio.h similarity index 100% rename from arch/ppc64/boot/stdio.h rename to arch/powerpc/boot/stdio.h diff --git a/arch/ppc64/boot/string.S b/arch/powerpc/boot/string.S similarity index 100% rename from arch/ppc64/boot/string.S rename to arch/powerpc/boot/string.S diff --git a/arch/ppc64/boot/string.h b/arch/powerpc/boot/string.h similarity index 100% rename from arch/ppc64/boot/string.h rename to arch/powerpc/boot/string.h diff --git a/arch/ppc64/boot/zImage.lds b/arch/powerpc/boot/zImage.lds similarity index 100% rename from arch/ppc64/boot/zImage.lds rename to arch/powerpc/boot/zImage.lds From d3ed65832029dcaf5fe086670a2f2c25600b51e9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 16 Nov 2005 13:40:43 +1100 Subject: [PATCH 053/169] [PATCH] ppc: Fix build with CONFIG_CHRP not set Building ARCH=ppc for multiplatforms with CONFIG_CHRP not set fails due to some unshielded code in xmon Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/ppc/xmon/start.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index 98612d420346..c80177f8ec04 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -184,7 +184,9 @@ xmon_map_scc(void) sccc = base + (addr & ~PAGE_MASK); sccd = sccc + 0x10; - } else { + } +#ifdef CONFIG_PPC_CHRP + else { base = (volatile unsigned char *) isa_io_base; if (_machine == _MACH_chrp) base = (volatile unsigned char *) @@ -200,6 +202,7 @@ xmon_map_scc(void) RXRDY = 1; DLAB = 0x80; } +#endif /* CONFIG_PPC_CHRP */ #elif defined(CONFIG_GEMINI) /* should already be mapped by the kernel boot */ sccc = (volatile unsigned char *) 0xffeffb0d; From 5d66da3d71e6aeca80ca08dbebd8a1cd72e6ee1f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 16 Nov 2005 13:54:32 +1100 Subject: [PATCH 054/169] [PATCH] powerpc: Make the vDSO functions set error code (#2) The vDSO functions should have the same calling convention as a syscall. Unfortunately, they currently don't set the cr0.so bit which is used to indicate an error. This patch makes them clear this bit unconditionally since all functions currently succeed. The syscall fallback done by some of them will eventually override this if the syscall fails. This also changes the symbol version of all vdso exports to make sure glibc can differenciate between old and fixed calls for existing ones like __kernel_gettimeofday. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso32/cacheflush.S | 2 ++ arch/powerpc/kernel/vdso32/datapage.S | 3 ++- arch/powerpc/kernel/vdso32/gettimeofday.S | 4 ++++ arch/powerpc/kernel/vdso64/cacheflush.S | 2 ++ arch/powerpc/kernel/vdso64/datapage.S | 3 ++- arch/powerpc/kernel/vdso64/gettimeofday.S | 4 ++++ include/asm-powerpc/vdso.h | 2 +- 7 files changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S index c8db993574ee..09629aea3e47 100644 --- a/arch/powerpc/kernel/vdso32/cacheflush.S +++ b/arch/powerpc/kernel/vdso32/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index f6b38472318d..4709f1d9542c 100644 --- a/arch/powerpc/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -54,7 +54,6 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl __get_datapage@local mtlr r12 @@ -63,6 +62,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) beqlr li r0,__NR_syscalls stw r0,0(r4) + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_syscall_map) @@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) lwz r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index 0a32a41d50b0..7eebff03a041 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -59,6 +59,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) stw r5,TZONE_TZ_DSTTIME(r11) 1: mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -117,6 +118,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mulli r5,r5,1000 stw r5,TSPC32_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -185,6 +187,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) stw r4,TSPC32_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -219,6 +222,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) li r3,0 cmpli cr0,r4,0 + crclr cr0*4+so beqlr lis r5,CLOCK_REALTIME_RES@h ori r5,r5,CLOCK_REALTIME_RES@l diff --git a/arch/powerpc/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S index d4a0ad28d534..cb4ae0a5edd0 100644 --- a/arch/powerpc/kernel/vdso64/cacheflush.S +++ b/arch/powerpc/kernel/vdso64/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index 6393e4137bc7..3b2dd7d0c1eb 100644 --- a/arch/powerpc/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -54,12 +54,12 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl V_LOCAL_FUNC(__get_datapage) mtlr r12 addi r3,r3,CFG_SYSCALL_MAP64 cmpli cr0,r4,0 + crclr cr0*4+so beqlr li r0,__NR_syscalls stw r0,0(r4) @@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) bl V_LOCAL_FUNC(__get_datapage) ld r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index 1a89094715cc..ccaeda5136d1 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -52,6 +52,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) stw r4,TZONE_TZ_MINWEST(r10) stw r5,TZONE_TZ_DSTTIME(r10) 1: mtlr r12 + crclr cr0*4+so li r3,0 /* always success */ blr .cfi_endproc @@ -99,6 +100,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -159,6 +161,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) std r7,TSPC64_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -193,6 +196,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) li r3,0 cmpli cr0,r4,0 + crclr cr0*4+so beqlr lis r5,CLOCK_REALTIME_RES@h ori r5,r5,CLOCK_REALTIME_RES@l diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h index 85d8a7be25c4..b9f9118b1607 100644 --- a/include/asm-powerpc/vdso.h +++ b/include/asm-powerpc/vdso.h @@ -11,7 +11,7 @@ #define VDSO32_MBASE VDSO32_LBASE #define VDSO64_MBASE VDSO64_LBASE -#define VDSO_VERSION_STRING LINUX_2.6.12 +#define VDSO_VERSION_STRING LINUX_2.6.15 /* Define if 64 bits VDSO has procedure descriptors */ #undef VDS64_HAS_DESCRIPTORS From 574780d56fdafe2c8ea98660a932760dfea9bffc Mon Sep 17 00:00:00 2001 From: Guido Guenther Date: Wed, 16 Nov 2005 00:08:44 -0800 Subject: [PATCH 055/169] [SPARC64]: Oops in pci_alloc_consistent with cingergyT2 From: Guido Guenther - Use correct API for allocating and freeing DMA buffers. Acked-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/media/dvb/cinergyT2/cinergyT2.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index a1607e7d6d6b..2dfd7cd160de 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -276,7 +276,7 @@ static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2) if (cinergyt2->stream_urb[i]) usb_free_urb(cinergyt2->stream_urb[i]); - pci_free_consistent(NULL, STREAM_URB_COUNT*STREAM_BUF_SIZE, + usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, cinergyt2->streambuf, cinergyt2->streambuf_dmahandle); } @@ -284,9 +284,8 @@ static int cinergyt2_alloc_stream_urbs (struct cinergyt2 *cinergyt2) { int i; - cinergyt2->streambuf = pci_alloc_consistent(NULL, - STREAM_URB_COUNT*STREAM_BUF_SIZE, - &cinergyt2->streambuf_dmahandle); + cinergyt2->streambuf = usb_buffer_alloc(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, + SLAB_KERNEL, &cinergyt2->streambuf_dmahandle); if (!cinergyt2->streambuf) { dprintk(1, "failed to alloc consistent stream memory area, bailing out!\n"); return -ENOMEM; From 7b5603e056b8b5f3175f14badd895b9ac567f315 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 16 Nov 2005 00:11:50 -0800 Subject: [PATCH 056/169] [DVB] cinergyT2: cinergyt2_register_rc() should return 0 on success Currently, the version when ENABLE_RC is defined, falls through to the end of the function without returning anything. Signed-off-by: David S. Miller --- drivers/media/dvb/cinergyT2/cinergyT2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 2dfd7cd160de..fb394a0d838c 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -779,6 +779,8 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) input_register_device(cinergyt2->rc_input_dev); schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); + + return 0; } static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) From 6e87abd0b8cbb23ed9ffe5cc9f790fb5cac45eae Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 16 Nov 2005 00:52:57 -0800 Subject: [PATCH 057/169] [DVB]: Add compat ioctl handling. Based upon a patch by Guido Guenther . Some of these ioctls had embedded time_t objects or pointers, so needed translation. Signed-off-by: David S. Miller --- fs/compat_ioctl.c | 133 +++++++++++++++++++++++++++++++++++ include/linux/compat_ioctl.h | 67 ++++++++++++++++++ 2 files changed, 200 insertions(+) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 26300fccb4fc..f07e60f9e102 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -121,6 +121,11 @@ #include +#include +#include +#include +#include + #undef INCLUDES #endif @@ -413,6 +418,128 @@ static int do_video_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg) return err; } +struct compat_dmx_event { + dmx_event_t event; + compat_time_t timeStamp; + union + { + dmx_scrambling_status_t scrambling; + } u; +}; + +static int do_dmx_get_event(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct dmx_event kevent; + mm_segment_t old_fs = get_fs(); + int err; + + set_fs(KERNEL_DS); + err = sys_ioctl(fd, cmd, (unsigned long) &kevent); + set_fs(old_fs); + + if (!err) { + struct compat_dmx_event __user *up = compat_ptr(arg); + + err = put_user(kevent.event, &up->event); + err |= put_user(kevent.timeStamp, &up->timeStamp); + err |= put_user(kevent.u.scrambling, &up->u.scrambling); + if (err) + err = -EFAULT; + } + + return err; +} + +struct compat_video_event { + int32_t type; + compat_time_t timestamp; + union { + video_size_t size; + unsigned int frame_rate; + } u; +}; + +static int do_video_get_event(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct video_event kevent; + mm_segment_t old_fs = get_fs(); + int err; + + set_fs(KERNEL_DS); + err = sys_ioctl(fd, cmd, (unsigned long) &kevent); + set_fs(old_fs); + + if (!err) { + struct compat_video_event __user *up = compat_ptr(arg); + + err = put_user(kevent.type, &up->type); + err |= put_user(kevent.timestamp, &up->timestamp); + err |= put_user(kevent.u.size.w, &up->u.size.w); + err |= put_user(kevent.u.size.h, &up->u.size.h); + err |= put_user(kevent.u.size.aspect_ratio, + &up->u.size.aspect_ratio); + if (err) + err = -EFAULT; + } + + return err; +} + +struct compat_video_still_picture { + compat_uptr_t iFrame; + int32_t size; +}; + +static int do_video_stillpicture(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct compat_video_still_picture __user *up; + struct video_still_picture __user *up_native; + compat_uptr_t fp; + int32_t size; + int err; + + up = (struct compat_video_still_picture __user *) arg; + err = get_user(fp, &up->iFrame); + err |= get_user(size, &up->size); + if (err) + return -EFAULT; + + up_native = + compat_alloc_user_space(sizeof(struct video_still_picture)); + + put_user(compat_ptr(fp), &up_native->iFrame); + put_user(size, &up_native->size); + + err = sys_ioctl(fd, cmd, (unsigned long) up_native); + + return err; +} + +struct compat_video_spu_palette { + int length; + compat_uptr_t palette; +}; + +static int do_video_set_spu_palette(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct compat_video_spu_palette __user *up; + struct video_spu_palette __user *up_native; + compat_uptr_t palp; + int length, err; + + up = (struct compat_video_spu_palette __user *) arg; + err = get_user(palp, &up->palette); + err |= get_user(length, &up->length); + + up_native = compat_alloc_user_space(sizeof(struct video_spu_palette)); + put_user(compat_ptr(palp), &up_native->palette); + put_user(length, &up_native->length); + + err = sys_ioctl(fd, cmd, (unsigned long) up_native); + + return err; +} + #ifdef CONFIG_NET static int do_siocgstamp(unsigned int fd, unsigned int cmd, unsigned long arg) { @@ -2954,5 +3081,11 @@ HANDLE_IOCTL(NCP_IOC_GETPRIVATEDATA_32, do_ncp_getprivatedata) HANDLE_IOCTL(NCP_IOC_SETPRIVATEDATA_32, do_ncp_setprivatedata) #endif +/* dvb */ +HANDLE_IOCTL(DMX_GET_EVENT, do_dmx_get_event) +HANDLE_IOCTL(VIDEO_GET_EVENT, do_video_get_event) +HANDLE_IOCTL(VIDEO_STILLPICTURE, do_video_stillpicture) +HANDLE_IOCTL(VIDEO_SET_SPU_PALETTE, do_video_set_spu_palette) + #undef DECLARES #endif diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h index 174f3379e5d9..119f9d064cc6 100644 --- a/include/linux/compat_ioctl.h +++ b/include/linux/compat_ioctl.h @@ -795,3 +795,70 @@ COMPATIBLE_IOCTL(HIDIOCGFLAG) COMPATIBLE_IOCTL(HIDIOCSFLAG) COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINDEX) COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINFO) +/* dvb */ +COMPATIBLE_IOCTL(AUDIO_STOP) +COMPATIBLE_IOCTL(AUDIO_PLAY) +COMPATIBLE_IOCTL(AUDIO_PAUSE) +COMPATIBLE_IOCTL(AUDIO_CONTINUE) +COMPATIBLE_IOCTL(AUDIO_SELECT_SOURCE) +COMPATIBLE_IOCTL(AUDIO_SET_MUTE) +COMPATIBLE_IOCTL(AUDIO_SET_AV_SYNC) +COMPATIBLE_IOCTL(AUDIO_SET_BYPASS_MODE) +COMPATIBLE_IOCTL(AUDIO_CHANNEL_SELECT) +COMPATIBLE_IOCTL(AUDIO_GET_STATUS) +COMPATIBLE_IOCTL(AUDIO_GET_CAPABILITIES) +COMPATIBLE_IOCTL(AUDIO_CLEAR_BUFFER) +COMPATIBLE_IOCTL(AUDIO_SET_ID) +COMPATIBLE_IOCTL(AUDIO_SET_MIXER) +COMPATIBLE_IOCTL(AUDIO_SET_STREAMTYPE) +COMPATIBLE_IOCTL(AUDIO_SET_EXT_ID) +COMPATIBLE_IOCTL(AUDIO_SET_ATTRIBUTES) +COMPATIBLE_IOCTL(AUDIO_SET_KARAOKE) +COMPATIBLE_IOCTL(DMX_START) +COMPATIBLE_IOCTL(DMX_STOP) +COMPATIBLE_IOCTL(DMX_SET_FILTER) +COMPATIBLE_IOCTL(DMX_SET_PES_FILTER) +COMPATIBLE_IOCTL(DMX_SET_BUFFER_SIZE) +COMPATIBLE_IOCTL(DMX_GET_PES_PIDS) +COMPATIBLE_IOCTL(DMX_GET_CAPS) +COMPATIBLE_IOCTL(DMX_SET_SOURCE) +COMPATIBLE_IOCTL(DMX_GET_STC) +COMPATIBLE_IOCTL(FE_GET_INFO) +COMPATIBLE_IOCTL(FE_DISEQC_RESET_OVERLOAD) +COMPATIBLE_IOCTL(FE_DISEQC_SEND_MASTER_CMD) +COMPATIBLE_IOCTL(FE_DISEQC_RECV_SLAVE_REPLY) +COMPATIBLE_IOCTL(FE_DISEQC_SEND_BURST) +COMPATIBLE_IOCTL(FE_SET_TONE) +COMPATIBLE_IOCTL(FE_SET_VOLTAGE) +COMPATIBLE_IOCTL(FE_ENABLE_HIGH_LNB_VOLTAGE) +COMPATIBLE_IOCTL(FE_READ_STATUS) +COMPATIBLE_IOCTL(FE_READ_BER) +COMPATIBLE_IOCTL(FE_READ_SIGNAL_STRENGTH) +COMPATIBLE_IOCTL(FE_READ_SNR) +COMPATIBLE_IOCTL(FE_READ_UNCORRECTED_BLOCKS) +COMPATIBLE_IOCTL(FE_SET_FRONTEND) +COMPATIBLE_IOCTL(FE_GET_FRONTEND) +COMPATIBLE_IOCTL(FE_GET_EVENT) +COMPATIBLE_IOCTL(FE_DISHNETWORK_SEND_LEGACY_CMD) +COMPATIBLE_IOCTL(VIDEO_STOP) +COMPATIBLE_IOCTL(VIDEO_PLAY) +COMPATIBLE_IOCTL(VIDEO_FREEZE) +COMPATIBLE_IOCTL(VIDEO_CONTINUE) +COMPATIBLE_IOCTL(VIDEO_SELECT_SOURCE) +COMPATIBLE_IOCTL(VIDEO_SET_BLANK) +COMPATIBLE_IOCTL(VIDEO_GET_STATUS) +COMPATIBLE_IOCTL(VIDEO_SET_DISPLAY_FORMAT) +COMPATIBLE_IOCTL(VIDEO_FAST_FORWARD) +COMPATIBLE_IOCTL(VIDEO_SLOWMOTION) +COMPATIBLE_IOCTL(VIDEO_GET_CAPABILITIES) +COMPATIBLE_IOCTL(VIDEO_CLEAR_BUFFER) +COMPATIBLE_IOCTL(VIDEO_SET_ID) +COMPATIBLE_IOCTL(VIDEO_SET_STREAMTYPE) +COMPATIBLE_IOCTL(VIDEO_SET_FORMAT) +COMPATIBLE_IOCTL(VIDEO_SET_SYSTEM) +COMPATIBLE_IOCTL(VIDEO_SET_HIGHLIGHT) +COMPATIBLE_IOCTL(VIDEO_SET_SPU) +COMPATIBLE_IOCTL(VIDEO_GET_NAVI) +COMPATIBLE_IOCTL(VIDEO_SET_ATTRIBUTES) +COMPATIBLE_IOCTL(VIDEO_GET_SIZE) +COMPATIBLE_IOCTL(VIDEO_GET_FRAME_RATE) From d10cb35a876c72b4b6711a366e341a1e4d8aa709 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Nov 2005 16:56:49 +0900 Subject: [PATCH 058/169] [PATCH] sil24: add constants Adds constants for ATAPI support to sata_sil24. This patch is originally from Jeff Garzik . Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 55e744d6db88..cb1933a3bd55 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -139,6 +139,7 @@ enum { PORT_CS_DEV_RST = (1 << 1), /* device reset */ PORT_CS_INIT = (1 << 2), /* port initialize */ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ PORT_CS_RESUME = (1 << 6), /* port resume */ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ @@ -188,11 +189,29 @@ enum { PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ + /* bits of PRB control field */ + PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ + PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ + PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ + PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ + PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* PRB protocol field */ + PRB_PROT_PACKET = (1 << 0), + PRB_PROT_TCQ = (1 << 1), + PRB_PROT_NCQ = (1 << 2), + PRB_PROT_READ = (1 << 3), + PRB_PROT_WRITE = (1 << 4), + PRB_PROT_TRANSPARENT = (1 << 5), + /* * Other constants */ SGE_TRM = (1 << 31), /* Last SGE in chain */ - PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */ + SGE_LNK = (1 << 30), /* linked list + Points to SGT, not SGE */ + SGE_DRD = (1 << 29), /* discard data read (/dev/null) + data address ignored */ /* board id */ BID_SIL3124 = 0, From 75b1f2f865c6e6c6c04e2779750192b8d3d504e8 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 16 Nov 2005 17:06:18 +0800 Subject: [PATCH 059/169] [PATCH] libata: honor the transfer cycle time speficied by the EIDE device The following code segment is not functional because the transfer cycle time speficied by the EIDE device is later overwritten by ata_timing_quantize(): /* * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MW_DMA cycle timing. */ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); (snip) ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); <== uninitialized "t" is used here } /* * Convert the timing to bus clock counts. */ ata_timing_quantize(s, t, T, UT); <== t is overwritten by quantized s The patch has been submitted for ide-timing.h before: http://marc.theaimsgroup.com/?l=linux-ide&m=110820013425454&w=2 Resubmitted for libata. Changes: - Minor fix to honor the following transfer cycle time speficied by the device - id[65]: Minimum Multiword DMA transfer cycle time per word - id[67]: Minimum PIO transfer cycle time without flow control - id[68]: Minimum PIO transfer cycle time with IORDY Signed-off-by: Albert Lee ======= Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ba1eb8b38e00..bb604dfbdef6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1570,11 +1570,13 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, /* * Find the mode. - */ + */ if (!(s = ata_timing_find_mode(speed))) return -EINVAL; + memcpy(t, s, sizeof(*s)); + /* * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MW_DMA cycle timing. @@ -1595,7 +1597,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, * Convert the timing to bus clock counts. */ - ata_timing_quantize(s, t, T, UT); + ata_timing_quantize(t, t, T, UT); /* * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T From c2cd76ff106b8bd9c0a754c6439c74e86fd2aba7 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 16 Nov 2005 09:23:30 -0500 Subject: [PATCH 060/169] [libata ahci] tone down ATAPI errors ATA devices don't generate many errors, so the preferred method is to printk() when they occur. ATAPI devices generate tons of exceptions during the normal course of operation, so this change skips logging the most common class of errors. --- drivers/scsi/ahci.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 894e7113e0b3..5386c0d6101c 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -558,23 +558,25 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16); } -static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) +static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) { void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; int work; - printk(KERN_WARNING "ata%u: port reset, " - "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", - ap->id, - irq_stat, - readl(mmio + HOST_IRQ_STAT), - readl(port_mmio + PORT_IRQ_STAT), - readl(port_mmio + PORT_CMD), - readl(port_mmio + PORT_TFDATA), - readl(port_mmio + PORT_SCR_STAT), - readl(port_mmio + PORT_SCR_ERR)); + if ((ap->device[0].class != ATA_DEV_ATAPI) || + ((irq_stat & PORT_IRQ_TF_ERR) == 0)) + printk(KERN_WARNING "ata%u: port reset, " + "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", + ap->id, + irq_stat, + readl(mmio + HOST_IRQ_STAT), + readl(port_mmio + PORT_IRQ_STAT), + readl(port_mmio + PORT_CMD), + readl(port_mmio + PORT_TFDATA), + readl(port_mmio + PORT_SCR_STAT), + readl(port_mmio + PORT_SCR_ERR)); /* stop DMA */ tmp = readl(port_mmio + PORT_CMD); @@ -632,7 +634,7 @@ static void ahci_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); } else { - ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); + ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); /* hack alert! We cannot use the supplied completion * function from inside the ->eh_strategy_handler() thread. @@ -677,7 +679,7 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) err_mask = AC_ERR_HOST_BUS; /* command processing has stopped due to error; restart */ - ahci_intr_error(ap, status); + ahci_restart_port(ap, status); if (qc) ata_qc_complete(qc, err_mask); From ce07d90aa80a4c9a956eb2f662e4be5ea5c6baf8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 14:38:19 +0000 Subject: [PATCH 061/169] [ARM] Fix arch-realview/system.h to use __io_address() Move __io_address to arch-realview/hardware.h, drop core.h from platsmp.c and localtimer.c, and include asm/io.h where required. Signed-off-by: Russell King --- arch/arm/mach-realview/core.h | 2 -- arch/arm/mach-realview/localtimer.c | 2 -- arch/arm/mach-realview/platsmp.c | 3 +-- include/asm-arm/arch-realview/hardware.h | 1 + include/asm-arm/arch-realview/system.h | 2 +- 5 files changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index d83e8bad2038..c06e6041df41 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -26,8 +26,6 @@ #include #include -#define __io_address(n) __io(IO_ADDRESS(n)) - extern struct sys_timer realview_timer; #define AMBA_DEVICE(name,busid,base,plat) \ diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index 5e917e37d095..c9d7c596b200 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -21,8 +21,6 @@ #include #include -#include "core.h" - #define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \ ((cpu) * REALVIEW_TWD_SIZE)) diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 0c7d4ac9a7b3..a8fbd76d8be5 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -17,8 +17,7 @@ #include #include #include - -#include "core.h" +#include extern void realview_secondary_startup(void); diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h index 67879cdb6ef2..9ca76dc3a7af 100644 --- a/include/asm-arm/arch-realview/hardware.h +++ b/include/asm-arm/arch-realview/hardware.h @@ -27,5 +27,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#define __io_address(n) __io(IO_ADDRESS(n)) #endif diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h index 9f8fcbca0869..6f3d0ce0ca1e 100644 --- a/include/asm-arm/arch-realview/system.h +++ b/include/asm-arm/arch-realview/system.h @@ -36,7 +36,7 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - unsigned int hdr_ctrl = (IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET); + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; unsigned int val; /* From 0a5709b2dc84140082ea235130a05c05d51f94a2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 14:51:20 +0000 Subject: [PATCH 062/169] [ARM] Include asm/hardware.h instead of asm/arch/hardware.h Rationalise hardware.h include. Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi_lcd.c | 2 +- arch/arm/plat-omap/dmtimer.c | 2 +- arch/arm/plat-omap/ocpi.c | 2 +- arch/arm/plat-omap/pm.c | 2 +- arch/arm/plat-omap/sram-fn.S | 2 +- include/asm-arm/arch-clps711x/uncompress.h | 2 +- include/asm-arm/arch-epxa10db/uncompress.h | 2 +- include/asm-arm/arch-h720x/uncompress.h | 2 +- include/asm-arm/arch-imx/irqs.h | 2 +- include/asm-arm/arch-imx/timex.h | 2 +- include/asm-arm/arch-integrator/smp.h | 2 +- include/asm-arm/arch-l7200/aux_reg.h | 2 +- include/asm-arm/arch-l7200/gp_timers.h | 2 +- include/asm-arm/arch-omap/gpio.h | 2 +- include/asm-arm/arch-omap/irqs.h | 2 +- include/asm-arm/arch-omap/mcbsp.h | 2 +- include/asm-arm/arch-omap/system.h | 2 +- include/asm-arm/arch-rpc/system.h | 2 +- include/asm-arm/hardware/dec21285.h | 2 +- 19 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 698eb06545c4..6dbcaf114ad7 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a1468d7326eb..38d7ebf87920 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -26,7 +26,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 2ede2ee8cae4..b86148227480 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -34,7 +34,7 @@ #include #include -#include +#include #define OCPI_BASE 0xfffec320 #define OCPI_FAULT (OCPI_BASE + 0x00) diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index 966cca031ca7..1a24e2c10714 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -509,7 +509,7 @@ static void omap_pm_init_proc(void) * @state: suspend state we're entering. * */ -//#include +//#include static int omap_pm_prepare(suspend_state_t state) { diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S index 4bea36964a00..66414cc8e6e3 100644 --- a/arch/arm/plat-omap/sram-fn.S +++ b/arch/arm/plat-omap/sram-fn.S @@ -12,7 +12,7 @@ #include #include #include -#include +#include .text diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h index 7d0ab791b16c..9fc4bcfa1681 100644 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ b/include/asm-arm/arch-clps711x/uncompress.h @@ -19,7 +19,7 @@ */ #include #include -#include +#include #include #undef CLPS7111_BASE diff --git a/include/asm-arm/arch-epxa10db/uncompress.h b/include/asm-arm/arch-epxa10db/uncompress.h index d33ad6a93749..fdfe0e6848f8 100644 --- a/include/asm-arm/arch-epxa10db/uncompress.h +++ b/include/asm-arm/arch-epxa10db/uncompress.h @@ -19,7 +19,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "asm/arch/platform.h" -#include "asm/arch/hardware.h" +#include "asm/hardware.h" #define UART00_TYPE (volatile unsigned int*) #include "asm/arch/uart00.h" diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h index 2fffacf85a01..9535764bcc71 100644 --- a/include/asm-arm/arch-h720x/uncompress.h +++ b/include/asm-arm/arch-h720x/uncompress.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include +#include #define LSR 0x14 #define TEMPTY 0x40 diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h index 238197cfb9d9..f195542898e0 100644 --- a/include/asm-arm/arch-imx/irqs.h +++ b/include/asm-arm/arch-imx/irqs.h @@ -23,7 +23,7 @@ #define __ARM_IRQS_H__ /* Use the imx definitions */ -#include +#include /* * IMX Interrupt numbers diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h index d65ab3cd5d5d..8c91674706b1 100644 --- a/include/asm-arm/arch-imx/timex.h +++ b/include/asm-arm/arch-imx/timex.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -#include +#include #define CLOCK_TICK_RATE (CLK32) #endif diff --git a/include/asm-arm/arch-integrator/smp.h b/include/asm-arm/arch-integrator/smp.h index 0ec7093f7c37..da6981efdc39 100644 --- a/include/asm-arm/arch-integrator/smp.h +++ b/include/asm-arm/arch-integrator/smp.h @@ -3,7 +3,7 @@ #include -#include +#include #include #define hard_smp_processor_id() \ diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h index 762cbc76c501..5b4396de16a0 100644 --- a/include/asm-arm/arch-l7200/aux_reg.h +++ b/include/asm-arm/arch-l7200/aux_reg.h @@ -9,7 +9,7 @@ #ifndef _ASM_ARCH_AUXREG_H #define _ASM_ARCH_AUXREG_H -#include +#include #define l7200aux_reg *((volatile unsigned int *) (AUX_BASE)) diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h index 6f20962df248..9c4804d13578 100644 --- a/include/asm-arm/arch-l7200/gp_timers.h +++ b/include/asm-arm/arch-l7200/gp_timers.h @@ -10,7 +10,7 @@ #ifndef _ASM_ARCH_GPTIMERS_H #define _ASM_ARCH_GPTIMERS_H -#include +#include /* * Layout of L7200 general purpose timer registers diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 1b3885741ac1..f486b72070ea 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -26,7 +26,7 @@ #ifndef __ASM_ARCH_OMAP_GPIO_H #define __ASM_ARCH_OMAP_GPIO_H -#include +#include #include #include diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 9779686bdceb..4ffce1d77759 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -260,7 +260,7 @@ extern void omap_init_irq(void); * The definition of NR_IRQS is in board-specific header file, which is * included via hardware.h */ -#include +#include #ifndef NR_IRQS #define NR_IRQS IH_BOARD_BASE diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h index 305bdeb16ab8..e79d98ab2ab6 100644 --- a/include/asm-arm/arch-omap/mcbsp.h +++ b/include/asm-arm/arch-omap/mcbsp.h @@ -24,7 +24,7 @@ #ifndef __ASM_ARCH_OMAP_MCBSP_H #define __ASM_ARCH_OMAP_MCBSP_H -#include +#include #define OMAP730_MCBSP1_BASE 0xfffb1000 #define OMAP730_MCBSP2_BASE 0xfffb1800 diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h index b43cdd2a3874..9af415d2944a 100644 --- a/include/asm-arm/arch-omap/system.h +++ b/include/asm-arm/arch-omap/system.h @@ -7,7 +7,7 @@ #include #include #include -#include +#include #include #ifndef CONFIG_MACH_VOICEBLUE diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h index ca3277d1d5ea..729c2ae4b513 100644 --- a/include/asm-arm/arch-rpc/system.h +++ b/include/asm-arm/arch-rpc/system.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h index 9049f0ddaecf..6685e3fb97b1 100644 --- a/include/asm-arm/hardware/dec21285.h +++ b/include/asm-arm/hardware/dec21285.h @@ -20,7 +20,7 @@ #include #ifndef __ASSEMBLY__ -#include +#include #define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) #else #define DC21285_IO(x) (x) From 224b5be6ddc12fa7587433878866cd39e7b935f5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 14:59:51 +0000 Subject: [PATCH 063/169] [ARM] compressed/head.S debugging defaults to asm/arch/debug-macro.S Since we want new platforms to use debug-macro.S, make the decompressor debugging method default to using this include file rather than having new platforms add to an #if defined(). Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c7f475e213e..6abafb6f1844 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -19,38 +19,28 @@ */ #ifdef DEBUG -#include - #if defined(CONFIG_DEBUG_ICEDCC) .macro loadsp, rb .endm - .macro writeb, ch, rb + .macro writeb, ch, rb mcr p14, 0, \ch, c0, c1, 0 .endm #else + +#include + .macro writeb, ch, rb senduart \ch, \rb .endm -#if defined(CONFIG_FOOTBRIDGE) || \ - defined(CONFIG_ARCH_RPC) || \ - defined(CONFIG_ARCH_INTEGRATOR) || \ - defined(CONFIG_ARCH_PXA) || \ - defined(CONFIG_ARCH_IXP4XX) || \ - defined(CONFIG_ARCH_IXP2000) || \ - defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) - .macro loadsp, rb - addruart \rb - .endm -#elif defined(CONFIG_ARCH_SA1100) +#if defined(CONFIG_ARCH_SA1100) .macro loadsp, rb mov \rb, #0x80000000 @ physical base address -# if defined(CONFIG_DEBUG_LL_SER3) +#ifdef CONFIG_DEBUG_LL_SER3 add \rb, \rb, #0x00050000 @ Ser3 -# else +#else add \rb, \rb, #0x00010000 @ Ser1 -# endif +#endif .endm #elif defined(CONFIG_ARCH_IOP331) .macro loadsp, rb @@ -64,7 +54,9 @@ add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT .endm #else -#error no serial architecture defined + .macro loadsp, rb + addruart \rb + .endm #endif #endif #endif From a7d068336197945dc4af65c5973c996e526d51cb Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 16 Nov 2005 15:05:11 +0000 Subject: [PATCH 064/169] [ARM] 3165/1: fix atomic_cmpxchg() implementation for ARMv6+ Patch from Nicolas Pitre If 'old' and 'oldval' are different then 'res' never gets set. In that case, if ever %0 happened to contain anything but zero (rather likely) then the code will loop forever (or until another CPU just come along and change the atomic value to match 'old' which is rather unlikely). Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- include/asm-arm/atomic.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h index 75b802719723..5f827509e923 100644 --- a/include/asm-arm/atomic.h +++ b/include/asm-arm/atomic.h @@ -87,6 +87,7 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) do { __asm__ __volatile__("@ atomic_cmpxchg\n" "ldrex %1, [%2]\n" + "mov %0, #0\n" "teq %1, %3\n" "strexeq %0, %4, [%2]\n" : "=&r" (res), "=&r" (oldval) From b526bf23fd4138456b1bb4f1305862695604c798 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 16 Nov 2005 15:05:12 +0000 Subject: [PATCH 065/169] [ARM] 3161/1: BAST - fix commas on end of structs Patch from Ben Dooks Make the use of , on the lsat entry structs consistenent through arch/arm/mach-s3c2410/mach-bast.c Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-bast.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 1be2567a7486..4d962717fdf7 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -203,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = { .name = "pclk", .divisor = 1, .min_baud = 0, - .max_baud = 0. + .max_baud = 0, } }; @@ -216,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, [1] = { .hwport = 1, @@ -225,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -235,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), } }; @@ -268,7 +268,7 @@ static struct mtd_partition bast_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, - .offset = 0 + .offset = 0, }, [1] = { .name = "/boot", @@ -296,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = { .nr_chips = 1, .nr_map = smartmedia_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [1] = { .name = "chip0", .nr_chips = 1, .nr_map = chip0_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [2] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [3] = { .name = "chip2", .nr_chips = 1, .nr_map = chip2_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, } }; @@ -355,17 +355,17 @@ static struct resource bast_dm9k_resource[] = { [0] = { .start = S3C2410_CS5 + BAST_PA_DM9000, .end = S3C2410_CS5 + BAST_PA_DM9000 + 3, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, [1] = { .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40, .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, [2] = { .start = IRQ_DM9000, .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, } }; @@ -375,7 +375,7 @@ static struct resource bast_dm9k_resource[] = { */ static struct dm9000_plat_data bast_dm9k_platdata = { - .flags = DM9000_PLATF_16BITONLY + .flags = DM9000_PLATF_16BITONLY, }; static struct platform_device bast_device_dm9k = { @@ -492,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = { .devices = bast_devices, .devices_count = ARRAY_SIZE(bast_devices), .clocks = bast_clocks, - .clocks_count = ARRAY_SIZE(bast_clocks) + .clocks_count = ARRAY_SIZE(bast_clocks), }; static void __init bast_map_io(void) From 994e12805336f899d0ec1cf38a99c7b6405d144a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 16 Nov 2005 15:05:13 +0000 Subject: [PATCH 066/169] [ARM] 3162/1: S3C2410 - updated defconfig Patch from Ben Dooks Minor changes, including add SysRq, selecting the DM9000 as a built-in driver, not as a module, and selecting the framebuffer. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/configs/s3c2410_defconfig | 119 +++++++++++++++++++++++------ 1 file changed, 94 insertions(+), 25 deletions(-) diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 756348bf5170..3f97590c91f2 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-git8 -# Thu Sep 8 19:24:02 2005 +# Linux kernel version: 2.6.15-rc1 +# Sun Nov 13 17:41:24 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -61,6 +61,23 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # System Type # @@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y # S3C2410 Boot # # CONFIG_S3C2410_BOOT_WATCHDOG is not set +# CONFIG_S3C2410_BOOT_ERROR_RESET is not set # # S3C2410 Setup @@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y # # Bus support # +CONFIG_ISA=y CONFIG_ISA_DMA_API=y # @@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_IMPA7 is not set CONFIG_MTD_BAST=y CONFIG_MTD_BAST_MAXSIZE=4 @@ -369,6 +392,11 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y # # Plug and Play support # +# CONFIG_PNP is not set # # Block devices # +# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_IDE_GENERIC=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDE_BAST=y +# CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -466,6 +489,11 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + # # PHY device support # @@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -CONFIG_DM9000=m +CONFIG_DM9000=y +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -490,6 +528,7 @@ CONFIG_DM9000=m # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set @@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support @@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_S3C2410_WATCHDOG=y + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set CONFIG_S3C2410_RTC=y @@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # +# CONFIG_I2C_ELEKTOR is not set CONFIG_I2C_ISA=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m # Graphics support # CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S3C2410=y +# CONFIG_FB_S3C2410_DEBUG is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y # # Logo configuration @@ -772,6 +835,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -810,6 +873,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0 CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -884,6 +949,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set @@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0 # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y From 7bdd720869ff75700b48b132ee71852615b55808 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 16 Nov 2005 11:06:59 -0500 Subject: [PATCH 067/169] [libata] bump versions --- drivers/scsi/ahci.c | 2 +- drivers/scsi/ata_piix.c | 2 +- drivers/scsi/libata.h | 2 +- drivers/scsi/sata_promise.c | 2 +- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_svw.c | 2 +- drivers/scsi/sata_sx4.c | 2 +- drivers/scsi/sata_vsc.c | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 5386c0d6101c..83467a05dc8e 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -48,7 +48,7 @@ #include #define DRV_NAME "ahci" -#define DRV_VERSION "1.01" +#define DRV_VERSION "1.2" enum { diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 855428ff37e9..333d69dd84ef 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -50,7 +50,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.04" +#define DRV_VERSION "1.05" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 74a84e0ec0a4..8ebaa694d18e 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -29,7 +29,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.12" /* must be exactly four chars */ +#define DRV_VERSION "1.20" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 242d906987ad..8a8e3e3ef0ed 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.02" +#define DRV_VERSION "1.03" enum { diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 4a6d3067d23c..a8987f5ff5cc 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.04" +#define DRV_VERSION "0.05" enum { QS_PORTS = 4, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 57e5a9d964c3..6e7f7c83a75a 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -54,7 +54,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "1.06" +#define DRV_VERSION "1.07" /* Taskfile registers offsets */ #define K2_SATA_TF_CMD_OFFSET 0x00 diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index b4bbe48acab0..dcc3ad9a9d6e 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.7" +#define DRV_VERSION "0.8" enum { diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 77a6e4b9262d..fcfa486965b4 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -47,7 +47,7 @@ #include #define DRV_NAME "sata_vsc" -#define DRV_VERSION "1.0" +#define DRV_VERSION "1.1" /* Interrupt register offsets (from chip base address) */ #define VSC_SATA_INT_STAT_OFFSET 0x00 From 8dc39b883e9497445b53c498be7493c3e43af006 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 17:23:57 +0000 Subject: [PATCH 068/169] [ARM] Add linux/compiler.h includes where required atomic.h, bitops.h and mmu_context.h are using likely/unlikely. thread_info.h uses __attribute_const__. Hence these files require linux/compiler.h to be included. Signed-off-by: Russell King --- include/asm-arm/atomic.h | 1 + include/asm-arm/bitops.h | 1 + include/asm-arm/mmu_context.h | 1 + include/asm-arm/thread_info.h | 1 + 4 files changed, 4 insertions(+) diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h index 5f827509e923..d8ba0a9eb085 100644 --- a/include/asm-arm/atomic.h +++ b/include/asm-arm/atomic.h @@ -12,6 +12,7 @@ #define __ASM_ARM_ATOMIC_H #include +#include typedef struct { volatile int counter; } atomic_t; diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index e007dd990da5..7399d431edfe 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -19,6 +19,7 @@ #ifdef __KERNEL__ +#include #include #define smp_mb__before_clear_bit() mb() diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 3d4b810d8c38..81c59facea3b 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARM_MMU_CONTEXT_H #define __ASM_ARM_MMU_CONTEXT_H +#include #include #include diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index 8252a4cd860f..7c98557b717f 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -12,6 +12,7 @@ #ifdef __KERNEL__ +#include #include #define THREAD_SIZE_ORDER 1 From 1b12050f17460dc312cfd8cc59c79e181b23062b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 17:38:40 +0000 Subject: [PATCH 069/169] [ARM] Move zone adjustment for SA1111 on SA11x0 platforms Unfortunately, using PAGE_SHIFT in asm/arch/memory.h is unsafe, and we can't include asm/page.h into this file because then we have a circular dependency. Move the offending code to arch/arm/common/sa1111.c instead. Signed-off-by: Russell King --- arch/arm/common/sa1111.c | 11 +++++++++++ include/asm-arm/arch-sa1100/memory.h | 14 ++------------ 2 files changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 39a6eea300a2..25387cf47530 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -132,6 +132,17 @@ static struct sa1111_dev_info sa1111_devices[] = { }, }; +void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes) +{ + unsigned int sz = SZ_1M >> PAGE_SHIFT; + + if (node != 0) + sz = 0; + + size[1] = size[0] - sz; + size[0] = sz; +} + /* * SA1111 interrupt support. Since clearing an IRQ while there are * active IRQs causes the interrupt output to pulse, the upper levels diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h index 0fc555b4c912..018a9f0e3986 100644 --- a/include/asm-arm/arch-sa1100/memory.h +++ b/include/asm-arm/arch-sa1100/memory.h @@ -18,20 +18,10 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_SA1111 -static inline void -__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) -{ - unsigned int sz = SZ_1M >> PAGE_SHIFT; - - if (node != 0) - sz = 0; - - size[1] = size[0] - sz; - size[0] = sz; -} +void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); #define arch_adjust_zones(node, size, holes) \ - __arch_adjust_zones(node, size, holes) + sa1111_adjust_zones(node, size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1) From 49ee57a3295a227b6a02785f75ccd521e493e983 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 18:03:10 +0000 Subject: [PATCH 070/169] [ARM] Use unsigned long not u32 in atomic_cmpxchg Since atomic.h does not include types.h, u32 may not be defined. Since atomics are supposed to work on unsigned long quantities, use unsigned long instead. Signed-off-by: Russell King --- include/asm-arm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h index d8ba0a9eb085..d586f65c8228 100644 --- a/include/asm-arm/atomic.h +++ b/include/asm-arm/atomic.h @@ -83,7 +83,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { - u32 oldval, res; + unsigned long oldval, res; do { __asm__ __volatile__("@ atomic_cmpxchg\n" From 45e109d07275e0820745dc465302de0aa5a8703b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 18:29:51 +0000 Subject: [PATCH 071/169] [ARM] sa1111.c needs asm/sizes.h Signed-off-by: Russell King --- arch/arm/common/sa1111.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 25387cf47530..d0d6e6d2d649 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -32,6 +32,7 @@ #include #include #include +#include #include From 5470dc656820fb67c0a2e352f0aaa48b86c19026 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2005 18:36:49 +0000 Subject: [PATCH 072/169] [ARM] No need to include asm/proc-fns.h into asm/system.h In the old days when arm26/arm32 was combined into the same architecture, proc-fns.h provided the xchg implementation for arm26 CPUs. Since we no longer combine these two, this include is no longer required. Remove it. Signed-off-by: Russell King --- include/asm-arm/system.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 8efa4ebdcacb..5621d61ebc07 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -93,8 +93,6 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), int sig, const char *name); -#include - #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) @@ -102,6 +100,8 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, extern asmlinkage void __backtrace(void); extern asmlinkage void c_backtrace(unsigned long fp, int pmode); + +struct mm_struct; extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); From e7c8a41e817f381ac5c2a59ecc81b483bd68a7df Mon Sep 17 00:00:00 2001 From: Yasuyuki Kozakai Date: Wed, 16 Nov 2005 12:55:37 -0800 Subject: [PATCH 073/169] [IPV4,IPV6]: replace handmade list with hlist in IPv{4,6} reassembly Both of ipq and frag_queue have *next and **prev, and they can be replaced with hlist. Thanks Arnaldo Carvalho de Melo for the suggestion. Signed-off-by: Yasuyuki Kozakai Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv4/ip_fragment.c | 40 ++++++++++++++-------------------------- net/ipv6/reassembly.c | 41 ++++++++++++++++------------------------- 2 files changed, 30 insertions(+), 51 deletions(-) diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index e7d26d9943c2..8ce0ce2ee48e 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -71,7 +71,7 @@ struct ipfrag_skb_cb /* Describe an entry in the "incomplete datagrams" queue. */ struct ipq { - struct ipq *next; /* linked list pointers */ + struct hlist_node list; struct list_head lru_list; /* lru list member */ u32 user; u32 saddr; @@ -89,7 +89,6 @@ struct ipq { spinlock_t lock; atomic_t refcnt; struct timer_list timer; /* when will this queue expire? */ - struct ipq **pprev; int iif; struct timeval stamp; }; @@ -99,7 +98,7 @@ struct ipq { #define IPQ_HASHSZ 64 /* Per-bucket lock is easy to add now. */ -static struct ipq *ipq_hash[IPQ_HASHSZ]; +static struct hlist_head ipq_hash[IPQ_HASHSZ]; static DEFINE_RWLOCK(ipfrag_lock); static u32 ipfrag_hash_rnd; static LIST_HEAD(ipq_lru_list); @@ -107,9 +106,7 @@ int ip_frag_nqueues = 0; static __inline__ void __ipq_unlink(struct ipq *qp) { - if(qp->next) - qp->next->pprev = qp->pprev; - *qp->pprev = qp->next; + hlist_del(&qp->list); list_del(&qp->lru_list); ip_frag_nqueues--; } @@ -139,27 +136,18 @@ static void ipfrag_secret_rebuild(unsigned long dummy) get_random_bytes(&ipfrag_hash_rnd, sizeof(u32)); for (i = 0; i < IPQ_HASHSZ; i++) { struct ipq *q; + struct hlist_node *p, *n; - q = ipq_hash[i]; - while (q) { - struct ipq *next = q->next; + hlist_for_each_entry_safe(q, p, n, &ipq_hash[i], list) { unsigned int hval = ipqhashfn(q->id, q->saddr, q->daddr, q->protocol); if (hval != i) { - /* Unlink. */ - if (q->next) - q->next->pprev = q->pprev; - *q->pprev = q->next; + hlist_del(&q->list); /* Relink to new hash chain. */ - if ((q->next = ipq_hash[hval]) != NULL) - q->next->pprev = &q->next; - ipq_hash[hval] = q; - q->pprev = &ipq_hash[hval]; + hlist_add_head(&q->list, &ipq_hash[hval]); } - - q = next; } } write_unlock(&ipfrag_lock); @@ -310,14 +298,16 @@ static void ip_expire(unsigned long arg) static struct ipq *ip_frag_intern(unsigned int hash, struct ipq *qp_in) { struct ipq *qp; - +#ifdef CONFIG_SMP + struct hlist_node *n; +#endif write_lock(&ipfrag_lock); #ifdef CONFIG_SMP /* With SMP race we have to recheck hash table, because * such entry could be created on other cpu, while we * promoted read lock to write lock. */ - for(qp = ipq_hash[hash]; qp; qp = qp->next) { + hlist_for_each_entry(qp, n, &ipq_hash[hash], list) { if(qp->id == qp_in->id && qp->saddr == qp_in->saddr && qp->daddr == qp_in->daddr && @@ -337,10 +327,7 @@ static struct ipq *ip_frag_intern(unsigned int hash, struct ipq *qp_in) atomic_inc(&qp->refcnt); atomic_inc(&qp->refcnt); - if((qp->next = ipq_hash[hash]) != NULL) - qp->next->pprev = &qp->next; - ipq_hash[hash] = qp; - qp->pprev = &ipq_hash[hash]; + hlist_add_head(&qp->list, &ipq_hash[hash]); INIT_LIST_HEAD(&qp->lru_list); list_add_tail(&qp->lru_list, &ipq_lru_list); ip_frag_nqueues++; @@ -392,9 +379,10 @@ static inline struct ipq *ip_find(struct iphdr *iph, u32 user) __u8 protocol = iph->protocol; unsigned int hash = ipqhashfn(id, saddr, daddr, protocol); struct ipq *qp; + struct hlist_node *n; read_lock(&ipfrag_lock); - for(qp = ipq_hash[hash]; qp; qp = qp->next) { + hlist_for_each_entry(qp, n, &ipq_hash[hash], list) { if(qp->id == id && qp->saddr == saddr && qp->daddr == daddr && diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index e4fe9ee484dd..5d316cb72ec9 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -74,7 +74,7 @@ struct ip6frag_skb_cb struct frag_queue { - struct frag_queue *next; + struct hlist_node list; struct list_head lru_list; /* lru list member */ __u32 id; /* fragment id */ @@ -95,14 +95,13 @@ struct frag_queue #define FIRST_IN 2 #define LAST_IN 1 __u16 nhoffset; - struct frag_queue **pprev; }; /* Hash table. */ #define IP6Q_HASHSZ 64 -static struct frag_queue *ip6_frag_hash[IP6Q_HASHSZ]; +static struct hlist_head ip6_frag_hash[IP6Q_HASHSZ]; static DEFINE_RWLOCK(ip6_frag_lock); static u32 ip6_frag_hash_rnd; static LIST_HEAD(ip6_frag_lru_list); @@ -110,9 +109,7 @@ int ip6_frag_nqueues = 0; static __inline__ void __fq_unlink(struct frag_queue *fq) { - if(fq->next) - fq->next->pprev = fq->pprev; - *fq->pprev = fq->next; + hlist_del(&fq->list); list_del(&fq->lru_list); ip6_frag_nqueues--; } @@ -163,28 +160,21 @@ static void ip6_frag_secret_rebuild(unsigned long dummy) get_random_bytes(&ip6_frag_hash_rnd, sizeof(u32)); for (i = 0; i < IP6Q_HASHSZ; i++) { struct frag_queue *q; + struct hlist_node *p, *n; - q = ip6_frag_hash[i]; - while (q) { - struct frag_queue *next = q->next; + hlist_for_each_entry_safe(q, p, n, &ip6_frag_hash[i], list) { unsigned int hval = ip6qhashfn(q->id, &q->saddr, &q->daddr); if (hval != i) { - /* Unlink. */ - if (q->next) - q->next->pprev = q->pprev; - *q->pprev = q->next; + hlist_del(&q->list); /* Relink to new hash chain. */ - if ((q->next = ip6_frag_hash[hval]) != NULL) - q->next->pprev = &q->next; - ip6_frag_hash[hval] = q; - q->pprev = &ip6_frag_hash[hval]; - } + hlist_add_head(&q->list, + &ip6_frag_hash[hval]); - q = next; + } } } write_unlock(&ip6_frag_lock); @@ -337,10 +327,13 @@ static struct frag_queue *ip6_frag_intern(unsigned int hash, struct frag_queue *fq_in) { struct frag_queue *fq; +#ifdef CONFIG_SMP + struct hlist_node *n; +#endif write_lock(&ip6_frag_lock); #ifdef CONFIG_SMP - for (fq = ip6_frag_hash[hash]; fq; fq = fq->next) { + hlist_for_each_entry(fq, n, &ip6_frag_hash[hash], list) { if (fq->id == fq_in->id && ipv6_addr_equal(&fq_in->saddr, &fq->saddr) && ipv6_addr_equal(&fq_in->daddr, &fq->daddr)) { @@ -358,10 +351,7 @@ static struct frag_queue *ip6_frag_intern(unsigned int hash, atomic_inc(&fq->refcnt); atomic_inc(&fq->refcnt); - if((fq->next = ip6_frag_hash[hash]) != NULL) - fq->next->pprev = &fq->next; - ip6_frag_hash[hash] = fq; - fq->pprev = &ip6_frag_hash[hash]; + hlist_add_head(&fq->list, &ip6_frag_hash[hash]); INIT_LIST_HEAD(&fq->lru_list); list_add_tail(&fq->lru_list, &ip6_frag_lru_list); ip6_frag_nqueues++; @@ -401,10 +391,11 @@ static __inline__ struct frag_queue * fq_find(u32 id, struct in6_addr *src, struct in6_addr *dst) { struct frag_queue *fq; + struct hlist_node *n; unsigned int hash = ip6qhashfn(id, src, dst); read_lock(&ip6_frag_lock); - for(fq = ip6_frag_hash[hash]; fq; fq = fq->next) { + hlist_for_each_entry(fq, n, &ip6_frag_hash[hash], list) { if (fq->id == id && ipv6_addr_equal(src, &fq->saddr) && ipv6_addr_equal(dst, &fq->daddr)) { From 5cfccd7f132432dd4705444a44b51d12ef88a85f Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 16 Nov 2005 23:37:53 +1100 Subject: [PATCH 074/169] [PATCH] powerpc: Fix database regression due to scheduler changes PowerPC's NUMA domain doesn't currently set up some of the newer sched-domains parameters. Brian Twichell discovered and diagnosed a 1.5% OLTP database regression on a 4 core POWER5 system that was due to the use of NUMA scheduling on ppc64. This patch applies some saneish values to the parameters, in line with other architectures. This solves the regression. Signed-off-by: Nick Piggin Signed-off-by: Paul Mackerras --- include/asm-powerpc/topology.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 015d28746e1b..0e8c20c96062 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -41,6 +41,10 @@ static inline int node_to_first_cpu(int node) .cache_hot_time = (10*1000000), \ .cache_nice_tries = 1, \ .per_cpu_gain = 100, \ + .busy_idx = 3, \ + .idle_id = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_NEWIDLE \ From 1e28a7ddd3e713384e9c6768e7c502031dc205e2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 17 Nov 2005 00:44:03 +0000 Subject: [PATCH 075/169] [PATCH] Avoid use of uninitialised spinlock in EEH. If the kernel supports both G5 and pSeries, and CONFIG_EEH is enabled, eeh_init() is (quite reasonably) never called when we boot on a G5. Yet eeh_check_failure() still gets called. We should avoid doing that if !eeh_subsystem_enabled. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 3 ++- include/asm-powerpc/eeh.h | 4 +++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 79de2310e70b..c8d2a40dc5b4 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; -static int eeh_subsystem_enabled; +int eeh_subsystem_enabled; +EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ static DEFINE_SPINLOCK(confirm_error_lock); diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 89f26ab31908..f8633aafe4ba 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -30,6 +30,8 @@ struct device_node; #ifdef CONFIG_EEH +extern int eeh_subsystem_enabled; + /* Values for eeh_mode bits in device_node */ #define EEH_MODE_SUPPORTED (1<<0) #define EEH_MODE_NOCHECK (1<<1) @@ -75,7 +77,7 @@ void eeh_remove_device(struct pci_dev *); * If this macro yields TRUE, the caller relays to eeh_check_failure() * which does further tests out of line. */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0) +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) /* * Reads from a device which has been isolated by EEH will return From b341e32e5cc1a154cb0ac2f4229c2d040647804b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 17 Nov 2005 13:34:57 +1100 Subject: [PATCH 076/169] [PATCH] powerpc: Workaround for offb on 64 bits platforms This fixes a problem with offb not parsing addresses properly on 64 bits machines, and thus crashing at boot. The problem is worked around by locating the matching PCI device and using the properly relocated PCI base addresses instead of misparsing the Open Firmware properties. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/video/offb.c | 40 +++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 2c856838694e..fe8ba364b3e8 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -325,8 +325,8 @@ static void __init offb_init_nodriver(struct device_node *dp) int *pp, i; unsigned int len; int width = 640, height = 480, depth = 8, pitch; - unsigned *up; - unsigned long address; + unsigned int rsize, *up; + unsigned long address = 0; if ((pp = (int *) get_property(dp, "depth", &len)) != NULL && len == sizeof(int)) @@ -344,10 +344,40 @@ static void __init offb_init_nodriver(struct device_node *dp) pitch = 0x1000; } else pitch = width; - if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL - && len == sizeof(unsigned)) + + rsize = (unsigned long)pitch * (unsigned long)height * + (unsigned long)(depth / 8); + + /* Try to match device to a PCI device in order to get a properly + * translated address rather then trying to decode the open firmware + * stuff in various incorrect ways + */ +#ifdef CONFIG_PCI + /* First try to locate the PCI device if any */ + { + struct pci_dev *pdev = NULL; + + for_each_pci_dev(pdev) { + if (dp == pci_device_to_OF_node(pdev)) + break; + } + if (pdev) { + for (i = 0; i < 6 && address == 0; i++) { + if ((pci_resource_flags(pdev, i) & + IORESOURCE_MEM) && + (pci_resource_len(pdev, i) >= rsize)) + address = pci_resource_start(pdev, i); + } + pci_dev_put(pdev); + } + } +#endif /* CONFIG_PCI */ + + if (address == 0 && + (up = (unsigned *) get_property(dp, "address", &len)) != NULL && + len == sizeof(unsigned)) address = (u_long) * up; - else { + if (address == 0) { for (i = 0; i < dp->n_addrs; ++i) if (dp->addrs[i].size >= pitch * height * depth / 8) From 4a59a810513d5f7aa76515908b8e3620fa1b9b69 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 16 Nov 2005 23:14:19 -0800 Subject: [PATCH 077/169] [NETFILTER]: Fix nf_conntrack compilation with CONFIG_NETFILTER_DEBUG CC [M] net/netfilter/nf_conntrack_core.o net/netfilter/nf_conntrack_core.c: In function 'nf_ct_unlink_expect': net/netfilter/nf_conntrack_core.c:390: error: 'exp_timeout' undeclared (first use in this function) net/netfilter/nf_conntrack_core.c:390: error: (Each undeclared identifier is reported only once net/netfilter/nf_conntrack_core.c:390: error: for each function it appears in.) Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index ea094b231d62..1da678303d78 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -387,7 +387,7 @@ nf_ct_invert_tuple(struct nf_conntrack_tuple *inverse, static void nf_ct_unlink_expect(struct nf_conntrack_expect *exp) { ASSERT_WRITE_LOCK(&nf_conntrack_lock); - NF_CT_ASSERT(!timer_pending(&exp_timeout)); + NF_CT_ASSERT(!timer_pending(&exp->timeout)); list_del(&exp->list); NF_CT_STAT_INC(expect_delete); exp->master->expecting--; From 64f043d80752a8e5f0d55255e7bb9a1a05af206f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 17 Nov 2005 10:50:01 -0500 Subject: [PATCH 078/169] [libata] add timeout to commands for which we call wait_completion() --- drivers/scsi/libata-core.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index bb604dfbdef6..665ae79e1fd6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1046,6 +1046,30 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) return modes; } +static int ata_qc_wait_err(struct ata_queued_cmd *qc, + struct completion *wait) +{ + int rc = 0; + + if (wait_for_completion_timeout(wait, 30 * HZ) < 1) { + /* timeout handling */ + unsigned int err_mask = ac_err_mask(ata_chk_status(qc->ap)); + + if (!err_mask) { + printk(KERN_WARNING "ata%u: slow completion (cmd %x)\n", + qc->ap->id, qc->tf.command); + } else { + printk(KERN_WARNING "ata%u: qc timeout (cmd %x)\n", + qc->ap->id, qc->tf.command); + rc = -EIO; + } + + ata_qc_complete(qc, err_mask); + } + + return rc; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -1125,7 +1149,7 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) if (rc) goto err_out; else - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); spin_lock_irqsave(&ap->host_set->lock, flags); ap->ops->tf_read(ap, &qc->tf); @@ -2269,7 +2293,7 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) if (rc) ata_port_disable(ap); else - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); DPRINTK("EXIT\n"); } @@ -2317,7 +2341,7 @@ static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) if (rc) goto err_out; - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); swap_buf_le16(dev->id, ATA_ID_WORDS); @@ -2373,7 +2397,7 @@ static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) if (rc) ata_port_disable(ap); else - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); DPRINTK("EXIT\n"); } From 22374677d18c5eeefd3a283431d312b8c44fef02 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 17 Nov 2005 10:59:48 -0500 Subject: [PATCH 079/169] [libata sata_mv] SATA probe, DMA boundary fixes - DMA boundary was being handled incorrectly. Copied the code from ata_fill_sg(), since Marvell has the same DMA boundary needs. (we can't use ata_fill_sg directly since we have different hardware descriptors) - cleaned up the SATA phy reset code, to deal with various errata --- drivers/scsi/sata_mv.c | 88 +++++++++++++++++++++++++++++++++--------- 1 file changed, 70 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 722ab537b7a6..ee0634da0872 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -321,6 +321,7 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static void mv_phy_reset(struct ata_port *ap); +static void __mv_phy_reset(struct ata_port *ap, int can_sleep); static void mv_host_stop(struct ata_host_set *host_set); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); @@ -362,7 +363,7 @@ static struct scsi_host_template mv_sht = { .eh_strategy_handler = ata_scsi_error, .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_MAX_SG_CT, + .sg_tablesize = MV_MAX_SG_CT / 2, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, @@ -893,20 +894,30 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) struct scatterlist *sg; ata_for_each_sg(sg, qc) { - u32 sg_len; dma_addr_t addr; + u32 sg_len, len, offset; addr = sg_dma_address(sg); sg_len = sg_dma_len(sg); - pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); - pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); - assert(0 == (sg_len & ~MV_DMA_BOUNDARY)); - pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); - if (ata_sg_is_last(sg, qc)) - pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + while (sg_len) { + offset = addr & MV_DMA_BOUNDARY; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; - i++; + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + pp->sg_tbl[i].flags_size = cpu_to_le32(len); + + sg_len -= len; + addr += len; + + if (!sg_len && ata_sg_is_last(sg, qc)) + pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + + i++; + } } } @@ -1693,11 +1704,19 @@ static void mv_stop_and_reset(struct ata_port *ap) mv_channel_reset(hpriv, mmio, ap->port_no); - mv_phy_reset(ap); + __mv_phy_reset(ap, 0); +} + +static inline void __msleep(unsigned int msec, int can_sleep) +{ + if (can_sleep) + msleep(msec); + else + mdelay(msec); } /** - * mv_phy_reset - Perform eDMA reset followed by COMRESET + * __mv_phy_reset - Perform eDMA reset followed by COMRESET * @ap: ATA channel to manipulate * * Part of this is taken from __sata_phy_reset and modified to @@ -1707,13 +1726,16 @@ static void mv_stop_and_reset(struct ata_port *ap) * Inherited from caller. This is coded to safe to call at * interrupt level, i.e. it does not sleep. */ -static void mv_phy_reset(struct ata_port *ap) +static void __mv_phy_reset(struct ata_port *ap, int can_sleep) { struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host_set->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; unsigned long timeout; + int retry = 5; + u32 sstatus; VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); @@ -1721,18 +1743,28 @@ static void mv_phy_reset(struct ata_port *ap) "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - /* proceed to init communications via the scr_control reg */ + /* Issue COMRESET via SControl */ +comreset_retry: scr_write_flush(ap, SCR_CONTROL, 0x301); - mdelay(1); + __msleep(1, can_sleep); + scr_write_flush(ap, SCR_CONTROL, 0x300); - timeout = jiffies + (HZ * 1); + __msleep(20, can_sleep); + + timeout = jiffies + msecs_to_jiffies(200); do { - mdelay(10); - if ((scr_read(ap, SCR_STATUS) & 0xf) != 1) + sstatus = scr_read(ap, SCR_STATUS) & 0x3; + if ((sstatus == 3) || (sstatus == 0)) break; + + __msleep(1, can_sleep); } while (time_before(jiffies, timeout)); - mv_scr_write(ap, SCR_ERROR, mv_scr_read(ap, SCR_ERROR)); + /* work around errata */ + if (IS_60XX(hpriv) && + (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) && + (retry-- > 0)) + goto comreset_retry; DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), @@ -1748,6 +1780,21 @@ static void mv_phy_reset(struct ata_port *ap) } ap->cbl = ATA_CBL_SATA; + /* even after SStatus reflects that device is ready, + * it seems to take a while for link to be fully + * established (and thus Status no longer 0x80/0x7F), + * so we poll a bit for that, here. + */ + retry = 20; + while (1) { + u8 drv_stat = ata_check_status(ap); + if ((drv_stat != 0x80) && (drv_stat != 0x7f)) + break; + __msleep(500, can_sleep); + if (retry-- <= 0) + break; + } + tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr); @@ -1766,6 +1813,11 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } +static void mv_phy_reset(struct ata_port *ap) +{ + __mv_phy_reset(ap, 1); +} + /** * mv_eng_timeout - Routine called by libata when SCSI times out I/O * @ap: ATA channel to manipulate From a2c91a8819e315e9fd1aef3ff57badb6c1be3f80 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 17 Nov 2005 05:44:44 -0500 Subject: [PATCH 080/169] [libata sata_mv] handle lack of hardware nIEN support Handle errata (it was unintentional on this h/w, whereas its intentional on others) whereby the nIEN bit in Device Control is ignored, leading to a situation where a hardware interrupt completes the qc before the polling code has a chance to. This will get fixed The Right Way(tm) once Albert Lee's irq-pio branch is merged, as the more natural PIO method on this hardware is interrupt-driven. --- drivers/scsi/sata_mv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ee0634da0872..ac184e60797e 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1219,6 +1219,10 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, handled++; } + if (ap && + (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) + continue; + err_mask = ac_err_mask(ata_status); shift = port << 1; /* (port * 2) */ @@ -1237,7 +1241,8 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); /* mark qc status appropriately */ - ata_qc_complete(qc, err_mask); + if (!(qc->tf.ctl & ATA_NIEN)) + ata_qc_complete(qc, err_mask); } } } From db7f6861822c80f17a23647b4d0042dcc56e2024 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 8 Nov 2005 22:23:13 +0000 Subject: [PATCH 081/169] [MIPS] Delete duplicate definitions of break codes. Signed-off-by: Ralf Baechle --- include/asm-mips/signal.h | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h index 8ca539e80d87..6fe903e09c62 100644 --- a/include/asm-mips/signal.h +++ b/include/asm-mips/signal.h @@ -155,27 +155,6 @@ typedef struct sigaltstack { #ifdef __KERNEL__ #include -/* - * The following break codes are or were in use for specific purposes in - * other MIPS operating systems. Linux/MIPS doesn't use all of them. The - * unused ones are here as placeholders; we might encounter them in - * non-Linux/MIPS object files or make use of them in the future. - */ -#define BRK_USERBP 0 /* User bp (used by debuggers) */ -#define BRK_KERNELBP 1 /* Break in the kernel */ -#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */ -#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */ -#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */ -#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */ -#define BRK_OVERFLOW 6 /* Overflow check */ -#define BRK_DIVZERO 7 /* Divide by zero check */ -#define BRK_RANGE 8 /* Range error check */ -#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */ -#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */ -#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ -#define BRK_MULOVF 1023 /* Multiply overflow */ -#define BRK_BUG 512 /* Used by BUG() */ - #define ptrace_signal_deliver(regs, cookie) do { } while (0) #endif /* __KERNEL__ */ From e0c9b7973021ea4baa1ed76ff25ceb80f75edd8f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 8 Nov 2005 22:36:48 +0000 Subject: [PATCH 082/169] [MIPS] feature-removal-schedule.txt: Schedule au1x00_uart for removal. The 8250 serial driver now has the ability to deal with the differences between the standard 8250 family of UARTs and their slightly strange brother on Alchemy SOCs. The loss of features is not considered an issue. Signed-off-by: Ralf Baechle --- Documentation/feature-removal-schedule.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 24fe8edad304..9b743198f77a 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -149,3 +149,13 @@ Files: drivers/md/md.c Why: Not reliable by design - can fail when most needed. Alternatives exist Who: NeilBrown + +--------------------------- + +What: au1x00_uart driver +When: January 2006 +Why: The 8250 serial driver now has the ability to deal with the differences + between the standard 8250 family of UARTs and their slightly strange + brother on Alchemy SOCs. The loss of features is not considered an + issue. +Who: Ralf Baechle From 0905780aae58ea69f2dafea9716ee2ea78dbe4e2 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 13 Jun 2005 19:58:50 +0000 Subject: [PATCH 083/169] [MIPS] zs.c: Resurrect the deceased zs.c for now. Not that it's meant to be sustained for long, but from time to time it's useful to have some console... Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- drivers/tc/zs.c | 150 +++++++++++++++++++++--------------------------- drivers/tc/zs.h | 13 ++--- 2 files changed, 70 insertions(+), 93 deletions(-) diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c index c52af73a251b..6756d0fab6fe 100644 --- a/drivers/tc/zs.c +++ b/drivers/tc/zs.c @@ -6,7 +6,7 @@ * * DECstation changes * Copyright (C) 1998-2000 Harald Koerfgen - * Copyright (C) 2000, 2001, 2002, 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005 Maciej W. Rozycki * * For the rest of the code the original Copyright applies: * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) @@ -55,6 +55,7 @@ #include #include #include +#include #ifdef CONFIG_SERIAL_DEC_CONSOLE #include #endif @@ -63,7 +64,6 @@ #include #include #include -#include #include #include @@ -128,6 +128,8 @@ static struct zs_parms ds_parms = { #define BUS_PRESENT (DS_BUS_PRESENT) +DEFINE_SPINLOCK(zs_lock); + struct dec_zschannel zs_channels[NUM_CHANNELS]; struct dec_serial zs_soft[NUM_CHANNELS]; int zs_channels_found; @@ -159,8 +161,6 @@ static unsigned char zs_init_regs[16] __initdata = { 0 /* write 15 */ }; -DECLARE_TASK_QUEUE(tq_zs_serial); - static struct tty_driver *serial_driver; /* serial subtype definitions */ @@ -294,8 +294,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set) { unsigned long flags; - - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (info->zs_channel != info->zs_chan_a) { if (set) { info->zs_chan_a->curregs[5] |= (which & (RTS | DTR)); @@ -304,7 +303,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set) } write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* Utility routines for the Zilog */ @@ -345,12 +344,10 @@ static inline void rs_recv_clear(struct dec_zschannel *zsc) * This routine is used by the interrupt handler to schedule * processing in the software interrupt portion of the driver. */ -static _INLINE_ void rs_sched_event(struct dec_serial *info, - int event) +static _INLINE_ void rs_sched_event(struct dec_serial *info, int event) { info->event |= 1 << event; - queue_task(&info->tqueue, &tq_zs_serial); - mark_bh(SERIAL_BH); + tasklet_schedule(&info->tlet); } static _INLINE_ void receive_chars(struct dec_serial *info, @@ -497,9 +494,10 @@ static _INLINE_ void status_handle(struct dec_serial *info) /* * This is the serial driver's generic interrupt routine */ -void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) +static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct dec_serial *info = (struct dec_serial *) dev_id; + irqreturn_t status = IRQ_NONE; unsigned char zs_intreg; int shift; @@ -521,6 +519,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) if ((zs_intreg & CHAN_IRQMASK) == 0) break; + status = IRQ_HANDLED; + if (zs_intreg & CHBRxIP) { receive_chars(info, regs); } @@ -534,6 +534,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) /* Why do we need this ? */ write_zsreg(info->zs_channel, 0, RES_H_IUS); + + return status; } #ifdef ZS_DEBUG_REGS @@ -578,12 +580,12 @@ static void rs_stop(struct tty_struct *tty) return; #if 1 - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (info->zs_channel->curregs[5] & TxENAB) { info->zs_channel->curregs[5] &= ~TxENAB; write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); #endif } @@ -595,7 +597,7 @@ static void rs_start(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_start")) return; - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); #if 1 if (info->xmit_cnt && info->xmit_buf && !(info->zs_channel->curregs[5] & TxENAB)) { info->zs_channel->curregs[5] |= TxENAB; @@ -606,7 +608,7 @@ static void rs_start(struct tty_struct *tty) transmit_chars(info); } #endif - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* @@ -618,12 +620,8 @@ static void rs_start(struct tty_struct *tty) * interrupt driver proper are done; the interrupt driver schedules * them using rs_sched_event(), and they get done here. */ -static void do_serial_bh(void) -{ - run_task_queue(&tq_zs_serial); -} -static void do_softint(void *private_) +static void do_softint(unsigned long private_) { struct dec_serial *info = (struct dec_serial *) private_; struct tty_struct *tty; @@ -634,10 +632,11 @@ static void do_softint(void *private_) if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { tty_wakeup(tty); + wake_up_interruptible(&tty->write_wait); } } -int zs_startup(struct dec_serial * info) +static int zs_startup(struct dec_serial * info) { unsigned long flags; @@ -650,7 +649,7 @@ int zs_startup(struct dec_serial * info) return -ENOMEM; } - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); #ifdef SERIAL_DEBUG_OPEN printk("starting up ttyS%d (irq %d)...", info->line, info->irq); @@ -706,7 +705,7 @@ int zs_startup(struct dec_serial * info) info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; info->flags |= ZILOG_INITIALIZED; - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return 0; } @@ -726,7 +725,7 @@ static void shutdown(struct dec_serial * info) info->irq); #endif - save_flags(flags); cli(); /* Disable interrupts */ + spin_lock_irqsave(&zs_lock, flags); if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); @@ -749,7 +748,7 @@ static void shutdown(struct dec_serial * info) set_bit(TTY_IO_ERROR, &info->tty->flags); info->flags &= ~ZILOG_INITIALIZED; - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* @@ -785,7 +784,7 @@ static void change_speed(struct dec_serial *info) i += 15; } - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); info->zs_baud = baud_table[i]; if (info->zs_baud) { brg = BPS_TO_BRG(info->zs_baud, zs_parms->clock/info->clk_divisor); @@ -858,7 +857,7 @@ static void change_speed(struct dec_serial *info) /* Load up the new values */ load_zsregs(info->zs_channel, info->zs_channel->curregs); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static void rs_flush_chars(struct tty_struct *tty) @@ -874,9 +873,9 @@ static void rs_flush_chars(struct tty_struct *tty) return; /* Enable transmitter */ - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); transmit_chars(info); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static int rs_write(struct tty_struct * tty, @@ -892,26 +891,17 @@ static int rs_write(struct tty_struct * tty, if (!tty || !info->xmit_buf) return 0; - save_flags(flags); while (1) { - cli(); + spin_lock_irqsave(&zs_lock, flags); c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); if (c <= 0) break; - if (from_user) { - down(&tmp_buf_sem); - copy_from_user(tmp_buf, buf, c); - c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c); - up(&tmp_buf_sem); - } else - memcpy(info->xmit_buf + info->xmit_head, buf, c); + memcpy(info->xmit_buf + info->xmit_head, buf, c); info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); info->xmit_cnt += c; - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); buf += c; count -= c; total += c; @@ -920,7 +910,7 @@ static int rs_write(struct tty_struct * tty, if (info->xmit_cnt && !tty->stopped && !info->tx_stopped && !info->tx_active) transmit_chars(info); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return total; } @@ -952,9 +942,9 @@ static void rs_flush_buffer(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) return; - cli(); + spin_lock_irq(&zs_lock); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - sti(); + spin_unlock_irq(&zs_lock); tty_wakeup(tty); } @@ -982,11 +972,11 @@ static void rs_throttle(struct tty_struct * tty) return; if (I_IXOFF(tty)) { - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); info->x_char = STOP_CHAR(tty); if (!info->tx_active) transmit_chars(info); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } if (C_CRTSCTS(tty)) { @@ -1010,7 +1000,7 @@ static void rs_unthrottle(struct tty_struct * tty) return; if (I_IXOFF(tty)) { - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (info->x_char) info->x_char = 0; else { @@ -1018,7 +1008,7 @@ static void rs_unthrottle(struct tty_struct * tty) if (!info->tx_active) transmit_chars(info); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } if (C_CRTSCTS(tty)) { @@ -1111,9 +1101,9 @@ static int get_lsr_info(struct dec_serial * info, unsigned int *value) { unsigned char status; - cli(); + spin_lock(&zs_lock); status = read_zsreg(info->zs_channel, 0); - sti(); + spin_unlock_irq(&zs_lock); put_user(status,value); return 0; } @@ -1136,11 +1126,11 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file) if (info->zs_channel == info->zs_chan_a) result = 0; else { - cli(); + spin_lock(&zs_lock); control = info->zs_chan_a->curregs[5]; status_a = read_zsreg(info->zs_chan_a, 0); status_b = read_zsreg(info->zs_channel, 0); - sti(); + spin_unlock_irq(&zs_lock); result = ((control & RTS) ? TIOCM_RTS: 0) | ((control & DTR) ? TIOCM_DTR: 0) | ((status_b & DCD) ? TIOCM_CAR: 0) @@ -1155,8 +1145,6 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct dec_serial * info = (struct dec_serial *)tty->driver_data; - int error; - unsigned int arg, bits; if (info->hook) return -ENODEV; @@ -1170,8 +1158,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, if (info->zs_channel == info->zs_chan_a) return 0; - get_user(arg, value); - cli(); + spin_lock(&zs_lock); if (set & TIOCM_RTS) info->zs_chan_a->curregs[5] |= RTS; if (set & TIOCM_DTR) @@ -1181,7 +1168,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, if (clear & TIOCM_DTR) info->zs_chan_a->curregs[5] &= ~DTR; write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]); - sti(); + spin_unlock_irq(&zs_lock); return 0; } @@ -1198,19 +1185,18 @@ static void rs_break(struct tty_struct *tty, int break_state) if (!info->port) return; - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (break_state == -1) info->zs_channel->curregs[5] |= SND_BRK; else info->zs_channel->curregs[5] &= ~SND_BRK; write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - int error; struct dec_serial * info = (struct dec_serial *)tty->driver_data; if (info->hook) @@ -1287,10 +1273,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp) if (!info || serial_paranoia_check(info, tty->name, "rs_close")) return; - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (tty_hung_up_p(filp)) { - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return; } @@ -1315,7 +1301,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->count = 0; } if (info->count) { - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return; } info->flags |= ZILOG_CLOSING; @@ -1358,7 +1344,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) } info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING); wake_up_interruptible(&info->close_wait); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* @@ -1398,7 +1384,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) /* * rs_hangup() --- called by tty_hangup() when a hangup is signaled. */ -void rs_hangup(struct tty_struct *tty) +static void rs_hangup(struct tty_struct *tty) { struct dec_serial * info = (struct dec_serial *)tty->driver_data; @@ -1466,16 +1452,16 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready before block: ttyS%d, count = %d\n", info->line, info->count); #endif - cli(); + spin_lock(&zs_lock); if (!tty_hung_up_p(filp)) info->count--; - sti(); + spin_unlock_irq(&zs_lock); info->blocked_open++; while (1) { - cli(); + spin_lock(&zs_lock); if (tty->termios->c_cflag & CBAUD) zs_rtsdtr(info, RTS | DTR, 1); - sti(); + spin_unlock_irq(&zs_lock); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || !(info->flags & ZILOG_INITIALIZED)) { @@ -1523,7 +1509,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, * the IRQ chain. It also performs the serial-specific * initialization for the tty structure. */ -int rs_open(struct tty_struct *tty, struct file * filp) +static int rs_open(struct tty_struct *tty, struct file * filp) { struct dec_serial *info; int retval, line; @@ -1706,7 +1692,7 @@ static void __init probe_sccs(void) } } - save_and_cli(flags); + spin_lock_irqsave(&zs_lock, flags); for (n = 0; n < zs_channels_found; n++) { if (n % 2 == 0) { write_zsreg(zs_soft[n].zs_chan_a, R9, FHWRES); @@ -1716,7 +1702,7 @@ static void __init probe_sccs(void) load_zsregs(zs_soft[n].zs_channel, zs_soft[n].zs_channel->curregs); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static struct tty_operations serial_ops = { @@ -1749,9 +1735,6 @@ int __init zs_init(void) if(!BUS_PRESENT) return -ENODEV; - /* Setup base handler, and timer table. */ - init_bh(SERIAL_BH, do_serial_bh); - /* Find out how many Z8530 SCCs we have */ if (zs_chain == 0) probe_sccs(); @@ -1800,8 +1783,7 @@ int __init zs_init(void) info->event = 0; info->count = 0; info->blocked_open = 0; - info->tqueue.routine = do_softint; - info->tqueue.data = info; + tasklet_init(&info->tlet, do_softint, (unsigned long)info); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); printk("ttyS%02d at 0x%08x (irq = %d) is a Z85C30 SCC\n", @@ -1833,8 +1815,7 @@ int __init zs_init(void) /* * polling I/O routines */ -static int -zs_poll_tx_char(void *handle, unsigned char ch) +static int zs_poll_tx_char(void *handle, unsigned char ch) { struct dec_serial *info = handle; struct dec_zschannel *chan = info->zs_channel; @@ -1857,8 +1838,7 @@ zs_poll_tx_char(void *handle, unsigned char ch) return -ENODEV; } -static int -zs_poll_rx_char(void *handle) +static int zs_poll_rx_char(void *handle) { struct dec_serial *info = handle; struct dec_zschannel *chan = info->zs_channel; @@ -2037,7 +2017,7 @@ static int __init serial_console_setup(struct console *co, char *options) } co->cflag = cflag; - save_and_cli(flags); + spin_lock_irqsave(&zs_lock, flags); /* * Set up the baud rate generator. @@ -2092,7 +2072,7 @@ static int __init serial_console_setup(struct console *co, char *options) zs_soft[co->index].clk_divisor = clk_divisor; zs_soft[co->index].zs_baud = get_zsbaud(&zs_soft[co->index]); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return 0; } @@ -2229,5 +2209,3 @@ void __init zs_kgdb_hook(int tty_num) set_debug_traps(); /* init stub */ } #endif /* ifdef CONFIG_KGDB */ - - diff --git a/drivers/tc/zs.h b/drivers/tc/zs.h index c52edffa6049..13512200ceba 100644 --- a/drivers/tc/zs.h +++ b/drivers/tc/zs.h @@ -6,14 +6,14 @@ * * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 2004 Maciej W. Rozycki + * Copyright (C) 2004, 2005 Maciej W. Rozycki */ #ifndef _DECSERIAL_H #define _DECSERIAL_H #include -#define NUM_ZSREGS 16 +#define NUM_ZSREGS 16 struct serial_struct { int type; @@ -139,8 +139,7 @@ struct dec_serial { int xmit_head; int xmit_tail; int xmit_cnt; - struct tq_struct tqueue; - struct tq_struct tqueue_hangup; + struct tasklet_struct tlet; wait_queue_head_t open_wait; wait_queue_head_t close_wait; }; @@ -282,7 +281,7 @@ struct dec_serial { #define DLC 4 /* Disable Lower Chain */ #define MIE 8 /* Master Interrupt Enable */ #define STATHI 0x10 /* Status high */ -#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ +#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ #define NORESET 0 /* No reset on write to R9 */ #define CHRB 0x40 /* Reset channel B */ #define CHRA 0x80 /* Reset channel A */ @@ -395,8 +394,8 @@ struct dec_serial { /* Read Register 15 (value of WR 15) */ /* Misc macros */ -#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES)) -#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \ +#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES)) +#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \ garbage = read_zsdata(channel); \ garbage = read_zsdata(channel); \ garbage = read_zsdata(channel); \ From 6f17ce33fef3fd84e3e45850c9388d118adfad96 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 10 Nov 2005 22:42:36 +0900 Subject: [PATCH 084/169] Add GT64111 PCI ID back Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d4c1c8fd2925..7b387faedb4d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1401,6 +1401,7 @@ #define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 #define PCI_VENDOR_ID_MARVELL 0x11ab +#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 #define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 #define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 #define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 From bdc3c3c7cbc3e1244c03640b4b372d097a1dacf3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Nov 2005 16:23:42 +0000 Subject: [PATCH 085/169] [MIPS] Add missing arch defines for the Alchemy MTD driver. Signed-off-by: Ralf Baechle --- include/asm-mips/mach-db1x00/db1200.h | 3 +++ include/asm-mips/mach-db1x00/db1x00.h | 6 ++++++ include/asm-mips/mach-pb1x00/pb1200.h | 3 +++ include/asm-mips/mach-pb1x00/pb1550.h | 7 +++++++ 4 files changed, 19 insertions(+) diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index 5d894376fc1a..647fdb54cc1d 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -220,5 +220,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BOARD_PC1_INT DB1200_PC1_INT #define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* Nand chip select */ +#define NAND_CS 1 + #endif /* __ASM_DB1200_H */ diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h index efafe65258b6..7b28b23f91ce 100644 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ b/include/asm-mips/mach-db1x00/db1x00.h @@ -200,6 +200,12 @@ typedef volatile struct ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) +#define NAND_CS 1 + +/* should be done by yamon */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ #endif /* __ASM_DB1X00_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index 9a3088b19bf3..409d443322c1 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -248,5 +248,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BOARD_PC1_INT PB1200_PC1_INT #define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* Nand chip select */ +#define NAND_CS 1 + #endif /* __ASM_PB1200_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h index 431d6088ea96..9578ead11e8a 100644 --- a/include/asm-mips/mach-pb1x00/pb1550.h +++ b/include/asm-mips/mach-pb1x00/pb1550.h @@ -166,4 +166,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) +#define NAND_CS 1 + +/* should be done by yamon */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ + #endif /* __ASM_PB1550_H */ From 443bf3292f04c53e92bf0588f1aa2c9b421545e2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Nov 2005 16:23:42 +0000 Subject: [PATCH 086/169] Add definitions for the Dallas DS17287 RTC. Signed-off-by: Ralf Baechle --- include/linux/ds17287rtc.h | 67 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 include/linux/ds17287rtc.h diff --git a/include/linux/ds17287rtc.h b/include/linux/ds17287rtc.h new file mode 100644 index 000000000000..c281ba42e28f --- /dev/null +++ b/include/linux/ds17287rtc.h @@ -0,0 +1,67 @@ +/* + * ds17287rtc.h - register definitions for the ds1728[57] RTC / CMOS RAM + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) 2003 Guido Guenther + */ +#ifndef __LINUX_DS17287RTC_H +#define __LINUX_DS17287RTC_H + +#include /* get the user-level API */ +#include /* spinlock_t */ +#include + +/* Register A */ +#define DS_REGA_DV2 0x40 /* countdown chain */ +#define DS_REGA_DV1 0x20 /* oscillator enable */ +#define DS_REGA_DV0 0x10 /* bank select */ + +/* bank 1 registers */ +#define DS_B1_MODEL 0x40 /* model number byte */ +#define DS_B1_SN1 0x41 /* serial number byte 1 */ +#define DS_B1_SN2 0x42 /* serial number byte 2 */ +#define DS_B1_SN3 0x43 /* serial number byte 3 */ +#define DS_B1_SN4 0x44 /* serial number byte 4 */ +#define DS_B1_SN5 0x45 /* serial number byte 5 */ +#define DS_B1_SN6 0x46 /* serial number byte 6 */ +#define DS_B1_CRC 0x47 /* CRC byte */ +#define DS_B1_CENTURY 0x48 /* Century byte */ +#define DS_B1_DALARM 0x49 /* date alarm */ +#define DS_B1_XCTRL4A 0x4a /* extendec control register 4a */ +#define DS_B1_XCTRL4B 0x4b /* extendec control register 4b */ +#define DS_B1_RTCADDR2 0x4e /* rtc address 2 */ +#define DS_B1_RTCADDR3 0x4f /* rtc address 3 */ +#define DS_B1_RAMLSB 0x50 /* extended ram LSB */ +#define DS_B1_RAMMSB 0x51 /* extended ram MSB */ +#define DS_B1_RAMDPORT 0x53 /* extended ram data port */ + +/* register details */ +/* extended control register 4a */ +#define DS_XCTRL4A_VRT2 0x80 /* valid ram and time */ +#define DS_XCTRL4A_INCR 0x40 /* increment progress status */ +#define DS_XCTRL4A_BME 0x20 /* burst mode enable */ +#define DS_XCTRL4A_PAB 0x08 /* power active bar ctrl */ +#define DS_XCTRL4A_RF 0x04 /* ram clear flag */ +#define DS_XCTRL4A_WF 0x02 /* wake up alarm flag */ +#define DS_XCTRL4A_KF 0x01 /* kickstart flag */ + +/* interrupt causes */ +#define DS_XCTRL4A_IFS (DS_XCTRL4A_RF|DS_XCTRL4A_WF|DS_XCTRL4A_KF) + +/* extended control register 4b */ +#define DS_XCTRL4B_ABE 0x80 /* auxiliary battery enable */ +#define DS_XCTRL4B_E32K 0x40 /* enable 32.768 kHz Output */ +#define DS_XCTRL4B_CS 0x20 /* crystal select */ +#define DS_XCTRL4B_RCE 0x10 /* ram clear enable */ +#define DS_XCTRL4B_PRS 0x08 /* PAB resec select */ +#define DS_XCTRL4B_RIE 0x04 /* ram clear interrupt enable */ +#define DS_XCTRL4B_WFE 0x02 /* wake up alarm interrupt enable */ +#define DS_XCTRL4B_KFE 0x01 /* kickstart interrupt enable */ + +/* interrupt enable bits */ +#define DS_XCTRL4B_IFES (DS_XCTRL4B_RIE|DS_XCTRL4B_WFE|DS_XCTRL4B_KFE) + +#endif /* __LINUX_DS17287RTC_H */ From cd017fbdd33f2d8294b0e0324faa1dc7750b4af0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Nov 2005 16:23:43 +0000 Subject: [PATCH 087/169] Add definitions for the Dallas DS1742 RTC / non-volatile memory. Signed-off-by: Ralf Baechle --- include/linux/ds1742rtc.h | 53 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 include/linux/ds1742rtc.h diff --git a/include/linux/ds1742rtc.h b/include/linux/ds1742rtc.h new file mode 100644 index 000000000000..a83cdd1cafc9 --- /dev/null +++ b/include/linux/ds1742rtc.h @@ -0,0 +1,53 @@ +/* + * ds1742rtc.h - register definitions for the Real-Time-Clock / CMOS RAM + * + * Copyright (C) 1999-2001 Toshiba Corporation + * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) + * + * Permission is hereby granted to copy, modify and redistribute this code + * in terms of the GNU Library General Public License, Version 2 or later, + * at your option. + */ +#ifndef __LINUX_DS1742RTC_H +#define __LINUX_DS1742RTC_H + +#include + +#define RTC_BRAM_SIZE 0x800 +#define RTC_OFFSET 0x7f8 + +/* + * Register summary + */ +#define RTC_CONTROL (RTC_OFFSET + 0) +#define RTC_CENTURY (RTC_OFFSET + 0) +#define RTC_SECONDS (RTC_OFFSET + 1) +#define RTC_MINUTES (RTC_OFFSET + 2) +#define RTC_HOURS (RTC_OFFSET + 3) +#define RTC_DAY (RTC_OFFSET + 4) +#define RTC_DATE (RTC_OFFSET + 5) +#define RTC_MONTH (RTC_OFFSET + 6) +#define RTC_YEAR (RTC_OFFSET + 7) + +#define RTC_CENTURY_MASK 0x3f +#define RTC_SECONDS_MASK 0x7f +#define RTC_DAY_MASK 0x07 + +/* + * Bits in the Control/Century register + */ +#define RTC_WRITE 0x80 +#define RTC_READ 0x40 + +/* + * Bits in the Seconds register + */ +#define RTC_STOP 0x80 + +/* + * Bits in the Day register + */ +#define RTC_BATT_FLAG 0x80 +#define RTC_FREQ_TEST 0x40 + +#endif /* __LINUX_DS1742RTC_H */ From 16212017a54afdb702ecc796aaa0448b795de03b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Nov 2005 16:23:44 +0000 Subject: [PATCH 088/169] [MIPS] IP32: No need to include . Signed-off-by: Ralf Baechle --- include/asm-mips/mach-ip32/mc146818rtc.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/include/asm-mips/mach-ip32/mc146818rtc.h b/include/asm-mips/mach-ip32/mc146818rtc.h index f5d780ff843f..c28ba8d84076 100644 --- a/include/asm-mips/mach-ip32/mc146818rtc.h +++ b/include/asm-mips/mach-ip32/mc146818rtc.h @@ -11,7 +11,6 @@ #ifndef __ASM_MACH_IP32_MC146818RTC_H #define __ASM_MACH_IP32_MC146818RTC_H -#include #include #define RTC_PORT(x) (0x70 + (x)) @@ -26,8 +25,10 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr) mace->isa.rtc[addr << 8] = data; } -/* FIXME: Do it right. For now just assume that noone lives in 20th century - * and no O2 user in 22th century ;-) */ +/* + * FIXME: Do it right. For now just assume that noone lives in 20th century + * and no O2 user in 22th century ;-) + */ #define mc146818_decode_year(year) ((year) + 2000) #define RTC_ALWAYS_BCD 0 From d93efab838ee399b45379bd97b2812ecee84471b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 11 Nov 2005 11:15:41 +0000 Subject: [PATCH 089/169] [MIPS] DDB5477: Fix unused variable warning. Signed-off-by: Ralf Baechle --- arch/mips/ddb5xxx/ddb5477/lcd44780.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c index 35c6c22610c5..9510b9ae6453 100644 --- a/arch/mips/ddb5xxx/ddb5477/lcd44780.c +++ b/arch/mips/ddb5xxx/ddb5477/lcd44780.c @@ -55,7 +55,7 @@ void lcd44780_data(unsigned char c) void lcd44780_puts(const char* s) { - int i,j; + int j; int pos = 0; lcd44780_command(LCD44780_CLEAR); @@ -76,8 +76,12 @@ void lcd44780_puts(const char* s) } } #ifdef LCD44780_PUTS_PAUSE - for(i = 1; i < 2000; i++) - lcd44780_wait(); + { + int i; + + for(i = 1; i < 2000; i++) + lcd44780_wait(); + } #endif } From efd9412d850397fc129c17eb33c84f74abb0d3ee Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 11 Nov 2005 11:46:25 +0000 Subject: [PATCH 090/169] [MIPS] JMR3927: Undo accidental rename. Signed-off-by: Ralf Baechle --- arch/mips/jmr3927/rbhma3100/setup.c | 2 +- include/asm-mips/mach-jmr3927/{asm => }/ds1742.h | 0 2 files changed, 1 insertion(+), 1 deletion(-) rename include/asm-mips/mach-jmr3927/{asm => }/ds1742.h (100%) diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 3e2fbdc66097..55ad0a578794 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -357,7 +357,7 @@ static void __init jmr3927_board_init(void) jmr3927_io_dipsw()); } -void __init plat_setup(void) +void __init tx3927_setup(void) { int i; diff --git a/include/asm-mips/mach-jmr3927/asm/ds1742.h b/include/asm-mips/mach-jmr3927/ds1742.h similarity index 100% rename from include/asm-mips/mach-jmr3927/asm/ds1742.h rename to include/asm-mips/mach-jmr3927/ds1742.h From 70ad7d1840d3479ea8503c9f89ec503115bfd2cf Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 11 Nov 2005 11:49:53 +0000 Subject: [PATCH 091/169] [MIPS] JMR3927: Fix syntax error. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-jmr3927.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c index 95a028769e56..f02ef6e36b02 100644 --- a/arch/mips/pci/pci-jmr3927.c +++ b/arch/mips/pci/pci-jmr3927.c @@ -54,5 +54,5 @@ struct pci_controller jmr3927_controller = { .pci_ops = &jmr3927_pci_ops, .io_resource = &pci_io_resource, .mem_resource = &pci_mem_resource, - .mem_offset = JMR3927_PCIMEM; + .mem_offset = JMR3927_PCIMEM }; From 19ce1cfb2d53e5b9f70d0199d551789db2718e6f Mon Sep 17 00:00:00 2001 From: Arnaud Giersch Date: Sun, 13 Nov 2005 00:38:18 +0100 Subject: [PATCH 092/169] [MIPS] IP32: Export mace symbol. Export mace symbol so that it can be used in modules. Signed-off-by: Arnaud Giersch Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/crime.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c index eb3a16a04fee..52cc6d994fd8 100644 --- a/arch/mips/sgi-ip32/crime.c +++ b/arch/mips/sgi-ip32/crime.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -21,6 +22,8 @@ struct sgi_crime *crime; struct sgi_mace *mace; +EXPORT_SYMBOL_GPL(mace); + void __init crime_init(void) { unsigned int id, rev; From 84c493d8e143360cfba3efede97e5a93d62c4d3d Mon Sep 17 00:00:00 2001 From: Arnaud Giersch Date: Sun, 13 Nov 2005 00:38:18 +0100 Subject: [PATCH 093/169] [MIPS] IP32 Fix and complete IP32 parport definitions Fix, complete, and indent IP32 parport definitions. Definition were wrong for CTXINUSE and DMACTIVE (1-bit shift). Add macros DATA_BOUND, DATALEN_SHIFT, and CTRSHIFT. Signed-off-by: Arnaud Giersch Signed-off-by: Ralf Baechle --- include/asm-mips/ip32/mace.h | 42 ++++++++++++++++++++++-------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/include/asm-mips/ip32/mace.h b/include/asm-mips/ip32/mace.h index 5bdc51d85b6c..e514efe44c06 100644 --- a/include/asm-mips/ip32/mace.h +++ b/include/asm-mips/ip32/mace.h @@ -150,24 +150,34 @@ struct mace_audio { /* register definitions for parallel port DMA */ struct mace_parport { -/* 0 - do nothing, 1 - pulse terminal count to the device after buffer is drained */ -#define MACEPAR_CONTEXT_LASTFLAG BIT(63) -/* Should not cross 4K page boundary */ -#define MACEPAR_CONTEXT_DATALEN_MASK 0xfff00000000 -/* Can be arbitrarily aligned on any byte boundary on output, 64 byte aligned on input */ -#define MACEPAR_CONTEXT_BASEADDR_MASK 0xffffffff + /* 0 - do nothing, + * 1 - pulse terminal count to the device after buffer is drained */ +#define MACEPAR_CONTEXT_LASTFLAG BIT(63) + /* Should not cross 4K page boundary */ +#define MACEPAR_CONTEXT_DATA_BOUND 0x0000000000001000UL +#define MACEPAR_CONTEXT_DATALEN_MASK 0x00000fff00000000UL +#define MACEPAR_CONTEXT_DATALEN_SHIFT 32 + /* Can be arbitrarily aligned on any byte boundary on output, + * 64 byte aligned on input */ +#define MACEPAR_CONTEXT_BASEADDR_MASK 0x00000000ffffffffUL volatile u64 context_a; volatile u64 context_b; -#define MACEPAR_CTLSTAT_DIRECTION BIT(0) /* 0 - mem->device, 1 - device->mem */ -#define MACEPAR_CTLSTAT_ENABLE BIT(1) /* 0 - channel frozen, 1 - channel enabled */ -#define MACEPAR_CTLSTAT_RESET BIT(2) /* 0 - channel active, 1 - complete channel reset */ -#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3) -#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4) - volatile u64 cntlstat; /* Control/Status register */ -#define MACEPAR_DIAG_CTXINUSE BIT(1) -#define MACEPAR_DIAG_DMACTIVE BIT(2) /* 1 - Dma engine is enabled and processing something */ -#define MACEPAR_DIAG_CTRMASK 0x3ffc /* Counter of bytes left */ - volatile u64 diagnostic; /* RO: diagnostic register */ + /* 0 - mem->device, 1 - device->mem */ +#define MACEPAR_CTLSTAT_DIRECTION BIT(0) + /* 0 - channel frozen, 1 - channel enabled */ +#define MACEPAR_CTLSTAT_ENABLE BIT(1) + /* 0 - channel active, 1 - complete channel reset */ +#define MACEPAR_CTLSTAT_RESET BIT(2) +#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3) +#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4) + volatile u64 cntlstat; /* Control/Status register */ +#define MACEPAR_DIAG_CTXINUSE BIT(0) + /* 1 - Dma engine is enabled and processing something */ +#define MACEPAR_DIAG_DMACTIVE BIT(1) + /* Counter of bytes left */ +#define MACEPAR_DIAG_CTRMASK 0x0000000000003ffcUL +#define MACEPAR_DIAG_CTRSHIFT 2 + volatile u64 diagnostic; /* RO: diagnostic register */ }; /* ISA Control and DMA registers */ From 59f145d28ce853b13dafdfab438c48f3ead0b38e Mon Sep 17 00:00:00 2001 From: Arnaud Giersch Date: Sun, 13 Nov 2005 00:38:18 +0100 Subject: [PATCH 094/169] [MIPS] IP32: Fix sparse warnings. Add __iomem qualifier to crime and mace pointers. Signed-off-by: Arnaud Giersch Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/crime.c | 4 ++-- include/asm-mips/ip32/crime.h | 2 +- include/asm-mips/ip32/mace.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c index 52cc6d994fd8..41b5eca1148c 100644 --- a/arch/mips/sgi-ip32/crime.c +++ b/arch/mips/sgi-ip32/crime.c @@ -19,8 +19,8 @@ #include #include -struct sgi_crime *crime; -struct sgi_mace *mace; +struct sgi_crime __iomem *crime; +struct sgi_mace __iomem *mace; EXPORT_SYMBOL_GPL(mace); diff --git a/include/asm-mips/ip32/crime.h b/include/asm-mips/ip32/crime.h index 152879bae20f..a13702fafa85 100644 --- a/include/asm-mips/ip32/crime.h +++ b/include/asm-mips/ip32/crime.h @@ -154,7 +154,7 @@ struct sgi_crime { #define CRIME_MEM_ERROR_ECC_REPL_MASK 0xffffffff }; -extern struct sgi_crime *crime; +extern struct sgi_crime __iomem *crime; #define CRIME_HI_MEM_BASE 0x40000000 /* this is where whole 1G of RAM is mapped */ diff --git a/include/asm-mips/ip32/mace.h b/include/asm-mips/ip32/mace.h index e514efe44c06..990082c81f39 100644 --- a/include/asm-mips/ip32/mace.h +++ b/include/asm-mips/ip32/mace.h @@ -363,6 +363,6 @@ struct sgi_mace { char _pad6[0x80000 - sizeof(struct mace_isa)]; }; -extern struct sgi_mace *mace; +extern struct sgi_mace __iomem *mace; #endif /* __ASM_MACE_H__ */ From 99289a4e8a9cb3fa6caa8fc4ebf57a33db497340 Mon Sep 17 00:00:00 2001 From: Arnaud Giersch Date: Sun, 13 Nov 2005 00:38:18 +0100 Subject: [PATCH 095/169] [MIPS] Add const qualifier to writes##bwlq. Add const qualifier to parameter addr of writes##bwlq. Signed-off-by: Arnaud Giersch Signed-off-by: Ralf Baechle --- include/asm-mips/io.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 3061870b7f6c..d42685747e7d 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -459,10 +459,10 @@ __BUILDIO(q, u64) #define __BUILD_MEMORY_STRING(bwlq, type) \ \ -static inline void writes##bwlq(volatile void __iomem *mem, void *addr, \ - unsigned int count) \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ { \ - volatile type *__addr = addr; \ + const volatile type *__addr = addr; \ \ while (count--) { \ mem_write##bwlq(*__addr, mem); \ From f10d14ddec8daf11a298f05ab3d644887df39830 Mon Sep 17 00:00:00 2001 From: Arnaud Giersch Date: Sun, 13 Nov 2005 00:38:18 +0100 Subject: [PATCH 096/169] [MIPS] Fix documentation typos. Signed-off-by: Arnaud Giersch Signed-off-by: Ralf Baechle --- include/asm-mips/atomic.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index 2c87b41e69ba..55c37c106ef0 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -231,11 +231,12 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) } /* - * atomic_sub_if_positive - add integer to atomic variable + * atomic_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract * @v: pointer of type atomic_t * - * Atomically test @v and decrement if it is greater than 0. - * The function returns the old value of @v minus 1. + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. */ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) { @@ -577,11 +578,12 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) } /* - * atomic64_sub_if_positive - add integer to atomic variable + * atomic64_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract * @v: pointer of type atomic64_t * - * Atomically test @v and decrement if it is greater than 0. - * The function returns the old value of @v minus 1. + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. */ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) { From b60ccd575c2d96041b856aad19a7d3af168d79b9 Mon Sep 17 00:00:00 2001 From: Pantelis Antoniou Date: Sun, 13 Nov 2005 23:27:46 +0200 Subject: [PATCH 097/169] [MIPS] Alchemy: Console output fixup This is needed to make console output appear with the new driver... Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 4f21f42d096b..08c8c855cc9c 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -93,7 +93,7 @@ void __init plat_setup(void) argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_AU1X00_CONSOLE +#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) if ((argptr = strstr(argptr, "console=")) == NULL) { argptr = prom_getcmdline(); strcat(argptr, " console=ttyS0,115200"); From 4237f229018ccf937578dee97565a49d712809e8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Nov 2005 16:23:50 +0000 Subject: [PATCH 098/169] [IDE] Add driver for Sibyte Swarm evaluation board This driver supports the IDE port on the Sibyte Swarm evaluation boards and it's relatives for the BCM1250 family of systems on a chip. Signed-off-by: Ralf Baechle Acked-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 4 + drivers/ide/Makefile | 2 +- drivers/ide/mips/Makefile | 1 + drivers/ide/mips/swarm.c | 201 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 207 insertions(+), 1 deletion(-) create mode 100644 drivers/ide/mips/Makefile create mode 100644 drivers/ide/mips/swarm.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 42e5b8175cbf..ed2bc87f475b 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -787,6 +787,10 @@ config BLK_DEV_IDE_PMAC_BLINK This option enables the use of the sleep LED as a hard drive activity LED. +config BLK_DEV_IDE_SWARM + tristate "IDE for Sibyte evaluation boards" + depends on SIBYTE_SB1xxx_SOC + config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index cca9c075966d..569fae717503 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -48,6 +48,6 @@ obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o -obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ +obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/ obj-$(CONFIG_BLK_DEV_HD) += legacy/ obj-$(CONFIG_ETRAX_IDE) += cris/ diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile new file mode 100644 index 000000000000..578e52a59588 --- /dev/null +++ b/drivers/ide/mips/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c new file mode 100644 index 000000000000..66f6064f4640 --- /dev/null +++ b/drivers/ide/mips/swarm.c @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2001, 2002, 2003 Broadcom Corporation + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * Derived loosely from ide-pmac.c, so: + * Copyright (C) 1998 Paul Mackerras. + * Copyright (C) 1995-1998 Mark Lord + */ + +/* + * Boards with SiByte processors so far have supported IDE devices via + * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all + * cases, byte-swapping must be avoided for these devices (whereas + * other PCI devices, for example, will require swapping). Any + * SiByte-targetted kernel including IDE support will include this + * file. Probing of a Generic Bus for an IDE device is controlled by + * the definition of "SIBYTE_HAVE_IDE", which is provided by + * for Broadcom boards. + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define DRV_NAME "ide-swarm" + +static char swarm_ide_string[] = DRV_NAME; + +static struct resource swarm_ide_resource = { + .name = "SWARM GenBus IDE", + .flags = IORESOURCE_MEM, +}; + +static struct platform_device *swarm_ide_dev; + +/* + * swarm_ide_probe - if the board header indicates the existence of + * Generic Bus IDE, allocate a HWIF for it. + */ +static int __devinit swarm_ide_probe(struct device *dev) +{ + ide_hwif_t *hwif; + u8 __iomem *base; + phys_t offset, size; + int i; + + if (!SIBYTE_HAVE_IDE) + return -ENODEV; + + /* Find an empty slot. */ + for (i = 0; i < MAX_HWIFS; i++) + if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET]) + break; + if (i >= MAX_HWIFS) { + printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); + return -ENOMEM; + } + + hwif = ide_hwifs + i; + + base = ioremap(A_IO_EXT_BASE, 0x800); + offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); + size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); + iounmap(base); + + offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; + size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; + if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { + printk(KERN_INFO DRV_NAME + ": IDE interface at GenBus disabled\n"); + return -EBUSY; + } + + printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n", + IDE_CS); + + swarm_ide_resource.start = offset; + swarm_ide_resource.end = offset + size - 1; + if (request_resource(&iomem_resource, &swarm_ide_resource)) { + printk(KERN_ERR DRV_NAME + ": can't request I/O memory resource\n"); + return -EBUSY; + } + + base = ioremap(offset, size); + + /* Setup MMIO ops. */ + default_hwif_mmiops(hwif); + /* Prevent resource map manipulation. */ + hwif->mmio = 2; + hwif->noprobe = 0; + + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) + hwif->hw.io_ports[i] = + (unsigned long)(base + ((0x1f0 + i) << 5)); + hwif->hw.io_ports[IDE_CONTROL_OFFSET] = + (unsigned long)(base + (0x3f6 << 5)); + hwif->hw.irq = K_INT_GB_IDE; + + memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports)); + hwif->irq = hwif->hw.irq; + + dev_set_drvdata(dev, hwif); + + return 0; +} + +static struct device_driver swarm_ide_driver = { + .name = swarm_ide_string, + .bus = &platform_bus_type, + .probe = swarm_ide_probe, +}; + +static void swarm_ide_platform_release(struct device *device) +{ + struct platform_device *pldev; + + /* free device */ + pldev = to_platform_device(device); + kfree(pldev); +} + +static int __devinit swarm_ide_init_module(void) +{ + struct platform_device *pldev; + int err; + + printk(KERN_INFO "SWARM IDE driver\n"); + + if (driver_register(&swarm_ide_driver)) { + printk(KERN_ERR "Driver registration failed\n"); + err = -ENODEV; + goto out; + } + + if (!(pldev = kmalloc(sizeof (*pldev), GFP_KERNEL))) { + err = -ENOMEM; + goto out_unregister_driver; + } + + memset (pldev, 0, sizeof (*pldev)); + pldev->name = swarm_ide_string; + pldev->id = 0; + pldev->dev.release = swarm_ide_platform_release; + + if (platform_device_register(pldev)) { + err = -ENODEV; + goto out_free_pldev; + } + + if (!pldev->dev.driver) { + /* + * The driver was not bound to this device, there was + * no hardware at this address. Unregister it, as the + * release fuction will take care of freeing the + * allocated structure + */ + platform_device_unregister (pldev); + } + + swarm_ide_dev = pldev; + + return 0; + +out_free_pldev: + kfree(pldev); + +out_unregister_driver: + driver_unregister(&swarm_ide_driver); +out: + return err; +} + +module_init(swarm_ide_init_module); From 8bf4057bdd8912c7388c28e625f0b846a4ca1468 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 12:17:42 +0000 Subject: [PATCH 099/169] [MIPS] JMR3927: It's ops-tx3927.o not ops-jmr3927.o Signed-off-by: Ralf Baechle --- arch/mips/pci/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 7b7468304022..741e67c9195a 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_MIPS_GT96100) += ops-gt96100.o obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o -obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o +obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o From 5135b0cdb23e47dd48d8100e45bd48ce937732ff Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 12:19:46 +0000 Subject: [PATCH 100/169] [MIPS] JMR3927: need include/asm-mips/mach-jmr3927 in it's include path. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 02692027730a..e14ba5e01a36 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -700,6 +700,7 @@ load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000 # core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \ arch/mips/jmr3927/common/ +cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 # From c32cf78c0289c4d8f5973c985dda18f2b3a03e2b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 13:01:50 +0000 Subject: [PATCH 101/169] [MIPS] JMR3927: Fix compilation by including . Signed-off-by: Ralf Baechle --- arch/mips/jmr3927/common/rtc_ds1742.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index 8b407d7dc460..9a8bff153d80 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -41,11 +41,11 @@ #include #include #include +#include #include #include -#include #include #define EPOCH 2000 From c183f1224bbae052b5fbb971d6eafc5cbdc6be4f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 13:05:26 +0000 Subject: [PATCH 102/169] [MIPS] JMR3927: Fix include wrapper symbol. Signed-off-by: Ralf Baechle --- include/asm-mips/mach-jmr3927/ds1742.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-mips/mach-jmr3927/ds1742.h b/include/asm-mips/mach-jmr3927/ds1742.h index 134a4b6c334a..cff6192d4bdb 100644 --- a/include/asm-mips/mach-jmr3927/ds1742.h +++ b/include/asm-mips/mach-jmr3927/ds1742.h @@ -5,12 +5,12 @@ * * Copyright (C) 2003 by Ralf Baechle */ -#ifndef __ASM_MACH_JMR3927_ASM_DS1742_H -#define __ASM_MACH_JMR3927_ASM_DS1742_H +#ifndef __ASM_MACH_JMR3927_DS1742_H +#define __ASM_MACH_JMR3927_DS1742_H #include #define rtc_read(reg) (jmr3927_nvram_in(addr)) #define rtc_write(data, reg) (jmr3927_nvram_out((data),(reg))) -#endif /* __ASM_MACH_JMR3927_ASM_DS1742_H */ +#endif /* __ASM_MACH_JMR3927_DS1742_H */ From 3d5d44017601c927f5e14c43b0efee34e7e50a66 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 13:11:35 +0000 Subject: [PATCH 103/169] [MIPS] Ocelot G: Use CPU_MASK_NONE instead of 0 to initialize cpu mask. Signed-off-by: Ralf Baechle --- arch/mips/momentum/ocelot_g/gt-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c index d0b5c9dd0ea4..e5eceed1beff 100644 --- a/arch/mips/momentum/ocelot_g/gt-irq.c +++ b/arch/mips/momentum/ocelot_g/gt-irq.c @@ -178,7 +178,7 @@ void gt64240_time_init(void) timer.name = "timer"; timer.dev_id = NULL; timer.next = NULL; - timer.mask = 0; + timer.mask = CPU_MASK_NONE; irq_desc[6].action = &timer; enable_irq(6); From 561a0792405bea8ead78990d755dd1f95b8e95b8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 13:25:59 +0000 Subject: [PATCH 104/169] [MIPS] SEAD: Delete seadint_init() prototype. There is no definition for seadint_init() and the unprotected prototype breaks compilation of assembler files. Signed-off-by: Ralf Baechle --- include/asm-mips/mips-boards/seadint.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h index c3dcfcb928b6..ba88f769f970 100644 --- a/include/asm-mips/mips-boards/seadint.h +++ b/include/asm-mips/mips-boards/seadint.h @@ -23,6 +23,4 @@ #define SEADINT_UART0 2 #define SEADINT_UART1 3 -extern void seadint_init(void); - #endif /* !(_MIPS_SEADINT_H) */ From 09b696efd93560609f25821208dae18027187425 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 13:55:06 +0000 Subject: [PATCH 105/169] [MIPS] TX3927: Try to glue the PCI code. Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-tx3927.c | 114 ++++++++++++++----------------------- 1 file changed, 43 insertions(+), 71 deletions(-) diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 0e0daadc303d..42530a0b84b3 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -72,13 +72,9 @@ static inline int check_abort(void) static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int ret, busno; + int ret; - /* check if the bus is top-level */ - if (bus->parent != NULL) - busno = bus->number; - - ret = mkaddr(busno, devfn, where); + ret = mkaddr(bus->number, devfn, where); if (ret) return ret; @@ -102,15 +98,9 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int ret, busno; - - /* check if the bus is top-level */ - if (bus->parent != NULL) - bus = bus->number; - else - bus = 0; + int ret; - ret = mkaddr(busno, devfn, where); + ret = mkaddr(bus->number, devfn, where); if (ret) return ret; @@ -120,7 +110,7 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, break; case 2: - *(volatile u16 *) (unsigned longulong) & tx3927_pcicptr->icd | (where & 2)) = + *(volatile u16 *) ((unsigned long) & tx3927_pcicptr->icd | (where & 2)) = cpu_to_le16(val); break; @@ -137,8 +127,8 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, } struct pci_ops jmr3927_pci_ops = { - jmr3927_pcibios_read_config, - jmr3927_pcibios_write_config, + jmr3927_pci_read_config, + jmr3927_pci_write_config, }; @@ -159,15 +149,14 @@ unsigned long tc_readl(volatile __u32 * addr) { unsigned long val; - addr = PHYSADDR(addr); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = - (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = + (unsigned long) CPHYSADDR(addr); + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); /* clear by setting */ tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; @@ -176,12 +165,11 @@ unsigned long tc_readl(volatile __u32 * addr) void tc_writel(unsigned long data, volatile __u32 * addr) { - addr = PHYSADDR(addr); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = cpu_to_le32(data); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = - (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = + (unsigned long) CPHYSADDR(addr); + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); @@ -198,21 +186,15 @@ unsigned char tx_ioinb(unsigned char *addr) ioaddr = (unsigned long) addr; offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x7; - else if (offset == 1) - byte = 0xb; - else if (offset == 2) - byte = 0xd; - else if (offset == 3) - byte = 0xe; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + byte = 0xf & ~(8 >> offset); + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); val = val & 0xff; /* clear by setting */ @@ -229,18 +211,12 @@ void tx_iooutb(unsigned long data, unsigned char *addr) data = data | (data << 8) | (data << 16) | (data << 24); ioaddr = (unsigned long) addr; offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x7; - else if (offset == 1) - byte = 0xb; - else if (offset == 2) - byte = 0xd; - else if (offset == 3) - byte = 0xe; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + byte = 0xf & ~(8 >> offset); + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); /* clear by setting */ @@ -255,18 +231,16 @@ unsigned short tx_ioinw(unsigned short *addr) int byte; ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x3; - else if (offset == 2) - byte = 0xc; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + offset = ioaddr & 0x2; + byte = 3 << offset; + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); val = val & 0xffff; /* clear by setting */ @@ -283,15 +257,13 @@ void tx_iooutw(unsigned long data, unsigned short *addr) data = data | (data << 16); ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x3; - else if (offset == 2) - byte = 0xc; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + offset = ioaddr & 0x2; + byte = 3 << offset; + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); /* clear by setting */ @@ -304,14 +276,14 @@ unsigned long tx_ioinl(unsigned int *addr) __u32 ioaddr; ioaddr = (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); /* clear by setting */ tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; @@ -323,11 +295,11 @@ void tx_iooutl(unsigned long data, unsigned int *addr) __u32 ioaddr; ioaddr = (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = cpu_to_le32(data); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); From 1a6ea3ec6784cf3dedc338e1980dc0b4cf28a805 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Nov 2005 16:10:01 +0000 Subject: [PATCH 106/169] [MIPS] SEAD: More build fixes. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/sead/sead_int.c | 12 +----------- arch/mips/mips-boards/sead/sead_setup.c | 4 ++-- include/asm-mips/mips-boards/seadint.h | 11 +++++++++-- 3 files changed, 12 insertions(+), 15 deletions(-) diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index e1dd7e009750..90fda0d9915f 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c @@ -30,19 +30,9 @@ extern asmlinkage void mipsIRQ(void); -asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART0, regs); -} - -asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART1, regs); -} - void __init arch_init_irq(void) { - mips_cpu_irq_init(0); + mips_cpu_irq_init(MIPSCPU_INT_BASE); /* Now safe to set the exception vector. */ set_except_vector(0, mipsIRQ); diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index de90bec5505e..f966bc161dfa 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -45,7 +45,7 @@ const char *get_system_type(void) return "MIPS SEAD"; } -static void __init sead_setup(void) +void __init plat_setup(void) { ioport_resource.end = 0x7fffffff; @@ -69,7 +69,7 @@ static void __init serial_init(void) #else s.iobase = SEAD_UART0_REGS_BASE+3; #endif - s.irq = SEADINT_UART0; + s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0; s.uartclk = SEAD_BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; s.iotype = 0; diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h index ba88f769f970..365c2a3c64f5 100644 --- a/include/asm-mips/mips-boards/seadint.h +++ b/include/asm-mips/mips-boards/seadint.h @@ -20,7 +20,14 @@ #ifndef _MIPS_SEADINT_H #define _MIPS_SEADINT_H -#define SEADINT_UART0 2 -#define SEADINT_UART1 3 +/* + * Interrupts 0..7 are used for SEAD CPU interrupts + */ +#define MIPSCPU_INT_BASE 0 + +#define MIPSCPU_INT_UART0 2 +#define MIPSCPU_INT_UART1 3 + +#define MIPSCPU_INT_CPUCTR 7 #endif /* !(_MIPS_SEADINT_H) */ From aec8b7557cf0fc4dac059112328b5aa89271c77e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Nov 2005 16:23:58 +0000 Subject: [PATCH 107/169] [MIPS] Update defconfigs Signed-off-by: Ralf Baechle --- arch/mips/configs/atlas_defconfig | 67 ++++++--- arch/mips/configs/bigsur_defconfig | 47 +++++-- arch/mips/configs/capcella_defconfig | 44 ++++-- arch/mips/configs/cobalt_defconfig | 44 ++++-- arch/mips/configs/db1000_defconfig | 69 +++++++--- arch/mips/configs/db1100_defconfig | 69 +++++++--- arch/mips/configs/db1200_defconfig | 72 +++++++--- arch/mips/configs/db1500_defconfig | 159 +++++++++++++++++++--- arch/mips/configs/db1550_defconfig | 70 +++++++--- arch/mips/configs/ddb5476_defconfig | 48 +++++-- arch/mips/configs/ddb5477_defconfig | 44 ++++-- arch/mips/configs/decstation_defconfig | 55 +++++--- arch/mips/configs/e55_defconfig | 44 ++++-- arch/mips/configs/ev64120_defconfig | 44 ++++-- arch/mips/configs/ev96100_defconfig | 42 ++++-- arch/mips/configs/ip22_defconfig | 64 ++++++--- arch/mips/configs/ip27_defconfig | 63 ++++++--- arch/mips/configs/ip32_defconfig | 45 ++++-- arch/mips/configs/it8172_defconfig | 50 +++++-- arch/mips/configs/ivr_defconfig | 46 +++++-- arch/mips/configs/jaguar-atx_defconfig | 42 ++++-- arch/mips/configs/jmr3927_defconfig | 47 +++++-- arch/mips/configs/lasat200_defconfig | 49 +++++-- arch/mips/configs/malta_defconfig | 67 ++++++--- arch/mips/configs/mipssim_defconfig | 54 ++++++-- arch/mips/configs/mpc30x_defconfig | 48 +++++-- arch/mips/configs/ocelot_3_defconfig | 59 +++++--- arch/mips/configs/ocelot_c_defconfig | 42 ++++-- arch/mips/configs/ocelot_defconfig | 43 ++++-- arch/mips/configs/ocelot_g_defconfig | 42 ++++-- arch/mips/configs/pb1100_defconfig | 68 +++++++-- arch/mips/configs/pb1500_defconfig | 70 +++++++--- arch/mips/configs/pb1550_defconfig | 70 +++++++--- arch/mips/configs/pnx8550-jbs_defconfig | 80 ++++++++--- arch/mips/configs/pnx8550-v2pci_defconfig | 89 +++++++++--- arch/mips/configs/qemu_defconfig | 43 ++++-- arch/mips/configs/rbhma4500_defconfig | 65 ++++++--- arch/mips/configs/rm200_defconfig | 71 +++++++--- arch/mips/configs/sb1250-swarm_defconfig | 45 ++++-- arch/mips/configs/sead_defconfig | 37 +++-- arch/mips/configs/tb0226_defconfig | 52 +++++-- arch/mips/configs/tb0229_defconfig | 48 +++++-- arch/mips/configs/workpad_defconfig | 46 +++++-- arch/mips/configs/yosemite_defconfig | 44 ++++-- arch/mips/defconfig | 64 ++++++--- 45 files changed, 1917 insertions(+), 654 deletions(-) diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 132ec3dac63f..74990758154b 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:13 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 12:14:02 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -191,6 +209,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -309,6 +328,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -363,6 +386,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -412,6 +436,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -472,10 +497,18 @@ CONFIG_IPDDP_DECAP=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -488,8 +521,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -498,13 +533,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -CONFIG_NET_CLS_IND=y # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -565,18 +601,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -643,6 +670,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -653,6 +681,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -707,6 +736,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -736,7 +766,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -754,6 +783,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -933,6 +963,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -991,6 +1022,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -1037,7 +1072,7 @@ CONFIG_JFS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 25e8a08e68be..ea4b75604c23 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:17 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:36 2005 # CONFIG_MIPS=y @@ -60,6 +60,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -127,8 +144,8 @@ CONFIG_SIBYTE_SB1xxx_SOC=y # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set # CONFIG_SIMULATION is not set -# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set -# CONFIG_CONFIG_SB1_CERR_STALL is not set +# CONFIG_SB1_CEX_ALWAYS_FATAL is not set +# CONFIG_SB1_CERR_STALL is not set CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set @@ -198,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_PREEMPT_NONE=y @@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -353,14 +375,6 @@ CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -443,6 +457,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -582,6 +597,7 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -634,6 +650,7 @@ CONFIG_SENSORS_PCA9539=y CONFIG_SENSORS_PCF8591=y CONFIG_SENSORS_RTC8564=y CONFIG_SENSORS_MAX6875=y +# CONFIG_RTC_X1205_I2C is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -685,6 +702,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -823,6 +844,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index bfbaa08c47cb..a86cc9d9bdae 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:20 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:39 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -270,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -329,16 +352,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -412,7 +426,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -430,6 +443,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -586,6 +600,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -601,6 +616,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -659,6 +675,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 4b4d1ddb3d42..3558c79b0eb7 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:23 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:42 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -172,6 +190,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -316,18 +340,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -401,7 +416,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -419,6 +433,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -574,6 +589,7 @@ CONFIG_COBALT_LCD=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -632,6 +648,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 6501144ec612..3b103fec7b86 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:26 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:04 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -201,7 +220,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set # @@ -259,15 +277,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -293,6 +315,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -343,6 +369,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -399,6 +426,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -417,18 +449,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -473,7 +496,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -490,6 +512,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -532,6 +555,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -598,13 +622,17 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -633,11 +661,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -696,6 +727,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index b8cd2cd923dd..79cdd940c6a8 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:29 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:07 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -247,15 +266,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -281,6 +304,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -331,6 +358,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -387,6 +415,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -405,18 +438,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -461,7 +485,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -478,6 +501,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -507,6 +531,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -573,13 +598,16 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -608,6 +636,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -650,12 +679,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_AU1100=y # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_AU1100=y # CONFIG_FB_VIRTUAL is not set # @@ -664,6 +692,7 @@ CONFIG_FB_AU1100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -697,6 +726,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 530b6c2d99f6..b6bad69398e1 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:32 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:10 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -200,7 +219,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -255,13 +273,17 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -287,6 +309,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -333,6 +359,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -394,6 +421,11 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -414,16 +446,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -495,6 +518,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -545,6 +569,7 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_MIPS_AU1X00_ENET is not set +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -638,13 +663,17 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -673,11 +702,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -720,12 +752,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_AU1200=y # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_AU1200=y # CONFIG_FB_VIRTUAL is not set # @@ -756,6 +787,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -862,6 +897,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 1c2784dee697..dbaf189fc9c0 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:36 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:15 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -208,7 +227,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -432,18 +464,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -518,7 +541,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -537,7 +559,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -599,6 +623,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -664,13 +689,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -702,12 +731,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -756,12 +788,94 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA MIPS devices +# +CONFIG_SND_AU1X00=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# PCMCIA devices +# # # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS_DRIVER=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set @@ -774,7 +888,7 @@ CONFIG_SOUND_PRIME=y # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_SONICVIBES is not set -CONFIG_SOUND_AU1000=y +# CONFIG_SOUND_AU1000 is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set @@ -815,12 +929,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 64248e2e924a..59c1ef214fc0 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:39 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:18 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -266,15 +284,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -300,6 +322,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -350,6 +376,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -412,6 +439,11 @@ CONFIG_MTD_NAND_AU1550=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -435,18 +467,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -550,7 +573,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -569,7 +591,9 @@ CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -639,6 +663,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -704,13 +729,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -742,12 +771,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -800,6 +832,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index 326f3aa63741..4ba29e612bdf 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:42 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:04 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -261,6 +280,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -292,6 +315,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -321,18 +345,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -412,7 +427,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -430,6 +444,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -443,7 +458,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -591,6 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -633,7 +648,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -642,6 +656,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -658,7 +673,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -687,6 +701,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index c2a01df3c8df..ea4e9046bbee 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:45 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:08 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -260,6 +279,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -291,6 +314,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -382,7 +397,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -400,6 +414,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -575,6 +590,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -633,6 +649,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 5bc885b72d14..1ac6c9b7ef96 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:48 2005 +# Linux kernel version: 2.6.14 +# Fri Nov 11 13:29:30 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -318,16 +341,7 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -365,12 +379,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SCSI_DECNCR=y # CONFIG_SCSI_DECSII is not set # CONFIG_SCSI_SATA is not set @@ -407,7 +422,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -491,10 +505,7 @@ CONFIG_ZS=y # # Non-8250 serial port support # -CONFIG_SERIAL_DZ=y -CONFIG_SERIAL_DZ_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_DZ is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -520,6 +531,7 @@ CONFIG_RTC=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -562,15 +574,14 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_PMAG_AA is not set CONFIG_FB_PMAG_BA=y CONFIG_FB_PMAGB_B=y # CONFIG_FB_MAXINE is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -594,6 +605,10 @@ CONFIG_LOGO_DEC_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -746,6 +761,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index c0d06ea5566c..a89d2f66cdfa 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:51 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:15 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,16 +340,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -403,7 +417,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -427,7 +440,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -552,6 +564,7 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -564,6 +577,7 @@ CONFIG_GPIO_VR41XX=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -622,6 +636,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index f1309d84d2fe..e6c3c27f41fe 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:54 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 11:05:12 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -326,18 +349,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -389,7 +403,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -407,6 +420,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -464,6 +478,7 @@ CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -569,6 +584,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -627,6 +643,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig index 8ac55b7acc01..52ca6bf5be66 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/mips/configs/ev96100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:57 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:22 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -185,6 +203,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -269,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -323,18 +346,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -379,7 +393,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -518,6 +531,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -575,6 +589,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 3ae3838f283c..79e3fe7e2d54 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:01 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:38:41 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -599,7 +627,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index d962f61d5b98..72998ec35b0b 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:04 2005 +# Linux kernel version: 2.6.15-rc1 +# Sun Nov 13 23:56:52 2005 # CONFIG_MIPS=y @@ -59,6 +59,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -186,6 +203,7 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=64 CONFIG_PREEMPT_NONE=y @@ -284,10 +302,18 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -300,8 +326,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -310,12 +338,13 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -377,14 +406,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -428,6 +449,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -437,6 +459,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -447,7 +470,6 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLOGIC_1280_1040=y CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set @@ -487,6 +509,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -516,7 +539,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -532,8 +554,12 @@ CONFIG_CICADA_PHY=m # CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_SGI_IOC3_ETH=y +CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y +CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -672,6 +698,7 @@ CONFIG_SGI_IP27_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -724,6 +751,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -762,7 +793,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index bf8fb95b21dc..955e30f1b1ad 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:07 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:32 2005 # CONFIG_MIPS=y @@ -51,6 +51,23 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -271,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -302,6 +324,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -334,14 +357,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -385,6 +400,7 @@ CONFIG_SCSI_SAS_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -399,6 +415,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -432,6 +449,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -461,7 +479,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -480,6 +497,7 @@ CONFIG_NET_ETHERNET=y CONFIG_SGI_O2MACE_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -637,6 +655,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -695,6 +714,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index 0940771bafb1..f631385217db 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:09 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:42:45 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -266,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -315,6 +338,7 @@ CONFIG_MTD_CHAR=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -372,6 +396,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -390,18 +419,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -467,7 +487,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -609,6 +628,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -669,10 +689,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS_DRIVER is not set CONFIG_SOUND_IT8172=y # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_AD1980 is not set # # USB support @@ -680,6 +700,10 @@ CONFIG_SOUND_IT8172=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index 9ba61dfc490d..8d94ac753e78 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:12 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:38 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -324,18 +347,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -409,7 +423,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -427,6 +440,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -539,7 +553,8 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_QTRONIX_KEYBOARD=y -# CONFIG_IT8172_SCR0 is not set +CONFIG_IT8172_SCR0=y +CONFIG_IT8172_SCR1=y # # Serial drivers @@ -583,6 +598,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -641,6 +657,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 21b2b8042f91..a8b4c9a9a63b 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:14 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:41 2005 # CONFIG_MIPS=y @@ -54,6 +54,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -184,6 +202,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set @@ -259,6 +278,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,18 +340,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -380,7 +394,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -398,6 +411,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -591,6 +605,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 6390a753e80b..c0ac5c793ec7 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:17 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:44 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -168,6 +186,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -315,18 +339,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -378,7 +393,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -396,6 +410,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -561,6 +576,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -603,7 +619,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -612,6 +627,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -628,7 +644,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -656,6 +671,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index 03cd0ca6e639..f2bd620ff0fa 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:19 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:47 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,6 +340,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -374,6 +398,11 @@ CONFIG_MTD_LASAT=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -396,18 +425,9 @@ CONFIG_MTD_LASAT=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -511,7 +531,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -529,6 +548,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -684,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -742,6 +763,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 2acdec959dd0..e48e1de442b4 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:22 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:42:55 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -197,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -315,6 +334,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -369,6 +392,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -418,6 +442,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -478,10 +503,18 @@ CONFIG_IPDDP_DECAP=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -494,8 +527,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -504,13 +539,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -CONFIG_NET_CLS_IND=y # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -572,18 +608,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -680,6 +707,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -695,6 +723,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -745,6 +774,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -774,7 +804,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -792,6 +821,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -967,6 +997,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -1025,6 +1056,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -1071,7 +1106,7 @@ CONFIG_JFS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index fb9bdd9e3151..04abd1b3202b 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:25 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:55 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -281,10 +300,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -297,8 +324,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -311,6 +340,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_POLICE is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -361,16 +391,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -537,6 +558,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -588,6 +610,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -721,6 +747,8 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index e2c082128532..46814be0ac38 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:28 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:12:01 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -210,7 +229,6 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_VRC4173=y # @@ -281,6 +299,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -341,16 +363,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -612,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -625,6 +639,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -632,6 +648,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -713,12 +730,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index f18d05c2ca77..e12118c30db4 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:30 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:01:36 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set @@ -265,15 +284,19 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -365,16 +392,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -411,12 +429,13 @@ CONFIG_SCSI_PROC_FS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -427,6 +446,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -461,6 +481,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -490,7 +511,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -508,6 +528,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -589,6 +610,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -691,6 +713,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -733,7 +756,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -742,6 +764,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -758,7 +781,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -767,6 +789,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -792,6 +815,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index d3a5fee02b79..99f0c980aee7 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:33 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:05 2005 # CONFIG_MIPS=y @@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -176,6 +193,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -298,6 +320,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -329,14 +352,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -388,7 +403,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -406,6 +420,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -562,6 +577,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -620,6 +636,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index 1edde12ebff9..11c7d74ee1e5 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:35 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:08 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -296,6 +319,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -375,7 +390,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -513,6 +527,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -570,6 +585,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index e2d5188cdc15..9ced1a9029d4 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:38 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:11 2005 # CONFIG_MIPS=y @@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -270,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -301,6 +323,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -332,14 +355,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -391,7 +406,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -410,6 +424,7 @@ CONFIG_MII=y CONFIG_GALILEO_64240_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -565,6 +580,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -623,6 +639,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 47247addee1b..dbcaa77add7c 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:41 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:12:31 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -203,7 +222,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set # @@ -261,15 +279,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -295,6 +317,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -345,6 +371,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -401,6 +428,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -419,18 +451,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -475,7 +498,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -492,6 +514,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_MIPS_AU1X00_ENET is not set +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -526,6 +549,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -592,12 +616,19 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # # CONFIG_SERIAL_AU1X00 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -624,11 +655,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -687,6 +721,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index f91a4eaae51a..5b685ceb6fde 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:44 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:14:25 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set CONFIG_PD6729=m # CONFIG_I82092 is not set -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set CONFIG_PCCARD_NONSTATIC=m @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -565,7 +587,9 @@ CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -635,6 +659,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -700,13 +725,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -738,12 +767,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -796,6 +828,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index bbad27cb40a2..f8f32e99f72d 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:47 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:15:34 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set CONFIG_PD6729=m # CONFIG_I82092 is not set -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set CONFIG_PCCARD_NONSTATIC=m @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -565,7 +587,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -627,6 +651,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -692,13 +717,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -730,12 +759,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -788,6 +820,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 555837e4c06f..5820e5f2295e 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:50 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:25 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -325,16 +348,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -423,12 +437,13 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -439,6 +454,7 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -473,6 +489,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -510,6 +527,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -681,6 +699,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -763,12 +782,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1039,6 +1061,8 @@ CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set @@ -1055,7 +1079,31 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1067,4 +1115,4 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index 37bd8d5c865d..a4ebb538e15c 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:53 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:38 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -255,13 +274,17 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -293,6 +316,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -352,16 +379,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -451,12 +469,13 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -472,6 +491,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -506,6 +526,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -543,6 +564,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -622,6 +644,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -746,6 +769,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -796,6 +820,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -872,7 +897,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -881,6 +905,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -897,7 +922,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,12 +970,15 @@ CONFIG_USB_DEVICEFS=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1235,7 +1262,31 @@ CONFIG_CMDLINE="" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1247,6 +1298,6 @@ CONFIG_CMDLINE="" CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 741a9a971367..5d39162077f4 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:56 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:31 2005 # CONFIG_MIPS=y @@ -49,6 +49,24 @@ CONFIG_BASE_SMALL=1 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + # # Machine selection # @@ -168,6 +186,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -234,6 +253,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -265,6 +288,7 @@ CONFIG_STANDALONE=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -289,16 +313,7 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set # CONFIG_ATA_OVER_ETH is not set # @@ -353,7 +368,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -385,7 +399,6 @@ CONFIG_NET_ISA=y # CONFIG_ETH16I is not set CONFIG_NE2000=y # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -557,6 +570,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 897420d39053..047e0b4236f8 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:59 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:45 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -188,6 +206,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,15 +284,19 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -355,6 +382,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -411,6 +439,11 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -438,16 +471,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -556,7 +580,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -574,6 +597,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -619,7 +643,6 @@ CONFIG_NET_PCI=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_LAN_SAA9730 is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -668,7 +691,6 @@ CONFIG_NET_RADIO=y # CONFIG_IPW2100 is not set # CONFIG_IPW_DEBUG is not set CONFIG_IPW2200=m -# CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set @@ -692,6 +714,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -804,6 +827,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -847,7 +871,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -856,6 +879,7 @@ CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -876,7 +900,6 @@ CONFIG_FB_ATY_CT=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -926,12 +949,15 @@ CONFIG_USB=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -1106,6 +1132,7 @@ CONFIG_RELAYFS_FS=m CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 988a05824f01..55458062352e 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:03 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:50 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -190,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -272,6 +291,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -325,6 +348,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -374,6 +398,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -430,10 +455,18 @@ CONFIG_DECNET=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -446,8 +479,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -456,13 +491,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -583,18 +619,9 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -638,6 +665,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -651,6 +679,7 @@ CONFIG_SCSI_SAS_ATTRS=m CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set @@ -723,6 +752,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -752,7 +782,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -770,6 +799,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -984,6 +1014,7 @@ CONFIG_RTC=m # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -1074,12 +1105,15 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1196,6 +1230,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m @@ -1271,7 +1306,7 @@ CONFIG_REISERFS_FS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 4365d9c8c42e..dc453a1e4806 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:05 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:43 2005 # CONFIG_MIPS=y @@ -58,6 +58,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -126,8 +143,8 @@ CONFIG_CPU_SB1_PASS_1=y # CONFIG_CPU_SB1_PASS_3 is not set CONFIG_SIBYTE_HAS_LDT=y # CONFIG_SIMULATION is not set -# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set -# CONFIG_CONFIG_SB1_CERR_STALL is not set +# CONFIG_SB1_CEX_ALWAYS_FATAL is not set +# CONFIG_SB1_CERR_STALL is not set CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set @@ -200,6 +217,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT_NONE=y @@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -359,14 +381,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -441,7 +455,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -459,6 +472,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -599,6 +613,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -651,6 +666,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index d835f6db1f41..aa27d583162d 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:07 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:45 2005 # CONFIG_MIPS=y @@ -47,6 +47,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -242,17 +261,8 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=18432 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - # # ATA/ATAPI/MFM/RLL support # @@ -353,6 +363,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -403,6 +414,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index bf60a17de2b0..ddc7e45996f2 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:10 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:49 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -277,6 +296,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -339,16 +362,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -385,12 +399,13 @@ CONFIG_SCSI_MULTI_LUN=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -401,6 +416,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -435,6 +451,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -464,7 +481,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -482,6 +498,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -634,6 +651,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -650,6 +668,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -733,12 +752,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index ac8b64e87b8a..e8c82f011e98 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:13 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 11:11:47 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -278,6 +297,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -341,18 +364,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -404,7 +418,6 @@ CONFIG_DUMMY=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -422,6 +435,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -504,6 +518,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y @@ -589,6 +604,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -605,6 +621,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -688,12 +705,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index ab13621ef3b9..125b2997abfe 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:16 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:17:02 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -273,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -328,16 +351,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -415,7 +429,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -439,7 +452,6 @@ CONFIG_MII=m # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -577,6 +589,7 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -588,12 +601,15 @@ CONFIG_WATCHDOG=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -652,6 +668,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 5b0b7f30e205..d90790b2ab30 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:18 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:59 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT_NONE=y @@ -260,6 +279,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -319,18 +342,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -382,7 +396,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -400,6 +413,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -575,6 +589,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -690,6 +708,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 4b585e642c2a..e9086da02e48 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:09 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 12:13:58 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -599,7 +627,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set From efb3442cf1c65747a858476e10f705612383eed1 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Wed, 16 Nov 2005 21:55:05 +0200 Subject: [PATCH 108/169] [PATCH] ipw2200: disallow direct scanning when device is down The function ipw_request_direct_scan() should bail out when the device is down. This fixes a lockup caused by wpa_supplicant triggering ipw_request_direct_scan() while the driver was in a middle of a reset due to firmware errors. Thanks to Zilvinas Valinskas for reporting the bug and helping me debug it. Signed-off-by: Pekka Enberg Acked-by: Zhu Yi Signed-off-by: Linus Torvalds --- drivers/net/wireless/ipw2200.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index b0d195d1721a..374b682e4d6a 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -8926,6 +8926,10 @@ static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid, struct ipw_scan_request_ext scan; int err = 0, scan_type; + if (!(priv->status & STATUS_INIT) || + (priv->status & STATUS_EXIT_PENDING)) + return 0; + down(&priv->sem); if (priv->status & STATUS_RF_KILL_MASK) { From 3b26b1100e26811e54770abaa221eae140ba840d Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 17 Nov 2005 13:58:30 +0800 Subject: [PATCH 109/169] [PATCH] ipw2200: fix error log offset calculation This fixes a slab corruption issue in the ipw2200 driver: it essentially multiplied the error log number _twice_ by the size of the error element entry (once explicitly in the code, and once implicitly as part of the regular pointer arithmetic). Cc: Henrik Brix Andersen Cc: Bernard Blackham Cc: Zilvinas Valinskas Cc: Pekka Enberg Signed-off-by: Zhu Yi Signed-off-by: Linus Torvalds -- --- drivers/net/wireless/ipw2200.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 374b682e4d6a..5e7c7e944c9d 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -1110,8 +1110,7 @@ static struct ipw_fw_error *ipw_alloc_error_log(struct ipw_priv *priv) error->elem_len = elem_len; error->log_len = log_len; error->elem = (struct ipw_error_elem *)error->payload; - error->log = (struct ipw_event *)(error->elem + - (sizeof(*error->elem) * elem_len)); + error->log = (struct ipw_event *)(error->elem + elem_len); ipw_capture_event_log(priv, log_len, error->log); From b7fd1edd2c0c225afa96af92d4adecb91e7d439d Mon Sep 17 00:00:00 2001 From: Constantine Gavrilov Date: Thu, 17 Nov 2005 11:40:43 +0200 Subject: [PATCH 110/169] [PATCH] x86: fix sigaddset() inline asm memory constraint Due to incomplete memory constraints, gcc would miscompile code with sigaddset on i386 if sig arg was const. A quote form Jakub to make the issue clear: "You need either __asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig-1) : "cc"); or __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig-1), "m"(*set) : "cc"); because the btsl instruction doesn't just set the memory to some value, but needs to read its previous content as well. If you don't tell that fact to GCC, GCC is of course free to optimize as if the asm was just setting the value and not depended on the previous value." Signed-off-by: Linus Torvalds --- include/asm-i386/signal.h | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/include/asm-i386/signal.h b/include/asm-i386/signal.h index cbb47d34aa31..6ba29f145bf8 100644 --- a/include/asm-i386/signal.h +++ b/include/asm-i386/signal.h @@ -159,14 +159,37 @@ typedef struct sigaltstack { #define __HAVE_ARCH_SIG_BITOPS -static __inline__ void sigaddset(sigset_t *set, int _sig) +#define sigaddset(set,sig) \ + (__builtin_constant_p(sig) ? \ + __const_sigaddset((set),(sig)) : \ + __gen_sigaddset((set),(sig))) + +static __inline__ void __gen_sigaddset(sigset_t *set, int _sig) { - __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc"); + __asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc"); } -static __inline__ void sigdelset(sigset_t *set, int _sig) +static __inline__ void __const_sigaddset(sigset_t *set, int _sig) { - __asm__("btrl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc"); + unsigned long sig = _sig - 1; + set->sig[sig / _NSIG_BPW] |= 1 << (sig % _NSIG_BPW); +} + +#define sigdelset(set,sig) \ + (__builtin_constant_p(sig) ? \ + __const_sigdelset((set),(sig)) : \ + __gen_sigdelset((set),(sig))) + + +static __inline__ void __gen_sigdelset(sigset_t *set, int _sig) +{ + __asm__("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc"); +} + +static __inline__ void __const_sigaddset(sigset_t *set, int _sig) +{ + unsigned long sig = _sig - 1; + set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW)); } static __inline__ int __const_sigismember(sigset_t *set, int _sig) From cd02e27b1514a27b2a8ab59755ae6d23d4d8a10f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 17 Nov 2005 10:04:31 -0800 Subject: [PATCH 111/169] x86: Fix silly typo in recent fixes The second __const_sigaddset() should have been a sigdelset.. Compile trouble noted by Greg K-H. Signed-off-by: Linus Torvalds --- include/asm-i386/signal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-i386/signal.h b/include/asm-i386/signal.h index 6ba29f145bf8..76524b4052ac 100644 --- a/include/asm-i386/signal.h +++ b/include/asm-i386/signal.h @@ -186,7 +186,7 @@ static __inline__ void __gen_sigdelset(sigset_t *set, int _sig) __asm__("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc"); } -static __inline__ void __const_sigaddset(sigset_t *set, int _sig) +static __inline__ void __const_sigdelset(sigset_t *set, int _sig) { unsigned long sig = _sig - 1; set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW)); From 1a7ec1a6a1df63aab9a1fa6174bd704241329805 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Thu, 17 Nov 2005 11:09:53 -0800 Subject: [PATCH 112/169] [PATCH] Fix IXP4xx I2C driver build breakage Platform device conversion missed a couple of spots. Signed-off-by: Deepak Saxena Signed-off-by: Linus Torvalds --- drivers/i2c/busses/i2c-ixp4xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index aa36855fa995..f87220be3c87 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -35,7 +35,7 @@ #include /* Pick up IXP4xx-specific bits */ -static struct device_driver ixp4xx_i2c_driver; +static struct platform_driver ixp4xx_i2c_driver; static inline int ixp4xx_scl_pin(void *data) { @@ -128,7 +128,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP4XX; - strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name, + strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.driver.name, I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data; @@ -140,7 +140,8 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) gpio_line_set(gpio->sda_pin, 0); if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) { - printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id); + printk(KERN_ERR "ERROR: Could not install %s\n", + plat_dev->dev.bus_id); kfree(drv_data); return err; From cca2362c64429283d384df5b4cb948dcd6e8127b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Nov 2005 09:46:24 -0800 Subject: [PATCH 113/169] [PATCH] USB: fix build breakage in dummy_hcd.c Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/gadget/dummy_hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 1e407745c115..c655d46c8aed 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -944,7 +944,7 @@ static int dummy_udc_suspend (struct platform_device *dev, pm_message_t state) set_link_state (dum); spin_unlock_irq (&dum->lock); - dev->power.power_state = state; + dev->dev.power.power_state = state; usb_hcd_poll_rh_status (dummy_to_hcd (dum)); return 0; } @@ -1904,7 +1904,7 @@ static int dummy_hcd_probe (struct platform_device *dev) struct usb_hcd *hcd; int retval; - dev_info (dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + dev_info(&dev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); hcd = usb_create_hcd (&dummy_hcd, &dev->dev, dev->dev.bus_id); if (!hcd) From 80ed89f6105fd2f35b3b9ee2078f31e1510da71e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Nov 2005 09:46:28 -0800 Subject: [PATCH 114/169] [PATCH] USB Serial: rename ChangeLog.old People are complaining about a .old file in the tree. So rename drivers/usb/serial/ChangeLog.old to ChangeLog.history. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/{ChangeLog.old => ChangeLog.history} | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) rename drivers/usb/serial/{ChangeLog.old => ChangeLog.history} (99%) diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.history similarity index 99% rename from drivers/usb/serial/ChangeLog.old rename to drivers/usb/serial/ChangeLog.history index c1b279939bbf..52c4f7bd7a80 100644 --- a/drivers/usb/serial/ChangeLog.old +++ b/drivers/usb/serial/ChangeLog.history @@ -400,7 +400,7 @@ visor.c Change Log comments: (11/11/2001) gkh Added support for the m125 devices, and added check to prevent oopses - for Clié devices that lie about the number of ports they have. + for Clié devices that lie about the number of ports they have. (08/30/2001) gkh Added support for the Clie devices, both the 3.5 and 4.0 os versions. From 116d75bd4d539309e0e1391e509f852a9cce82a6 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 17 Nov 2005 09:46:33 -0800 Subject: [PATCH 115/169] [PATCH] USB: add new wacom devices to usb hid-core list This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. Signed-off-by: Ping Cheng Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/input/hid-core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 79ddce4555ab..45f3130fadea 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1318,6 +1318,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_WACOM_PTU 0x0003 #define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0 #define USB_DEVICE_ID_WACOM_CINTIQ 0x003F +#define USB_DEVICE_ID_WACOM_DTF 0x00C0 #define USB_VENDOR_ID_ACECAD 0x0460 #define USB_DEVICE_ID_ACECAD_FLAIR 0x0004 @@ -1524,6 +1525,9 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 7, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 8, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 9, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE }, @@ -1531,11 +1535,19 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 1, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 3, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 4, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 5, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 6, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, From ebb6f371ac5ce623051c4431c5d0f093462f679b Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 17 Nov 2005 09:46:51 -0800 Subject: [PATCH 116/169] [PATCH] USB: wacom tablet driver update This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. and report Device IDs. Signed-off-by: Ping Cheng Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/input/wacom.c | 133 +++++++++++++++++++++++++++++++------- 1 file changed, 110 insertions(+), 23 deletions(-) diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index ea0f75773ae1..aea1cfae34cc 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -52,8 +52,10 @@ * v1.30.1 (pi) - Added Graphire3 support * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... * v1.43 (pc) - Added support for Cintiq 21UX - - Fixed a Graphire bug - - Merged wacom_intuos3_irq into wacom_intuos_irq + * - Fixed a Graphire bug + * - Merged wacom_intuos3_irq into wacom_intuos_irq + * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. + * - Report Device IDs */ /* @@ -76,7 +78,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.43" +#define DRIVER_VERSION "v1.44" #define DRIVER_AUTHOR "Vojtech Pavlik " #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -86,10 +88,14 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE(DRIVER_LICENSE); #define USB_VENDOR_ID_WACOM 0x056a +#define STYLUS_DEVICE_ID 0x02 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A enum { PENPARTNER = 0, GRAPHIRE, + G4, PL, INTUOS, INTUOS3, @@ -116,6 +122,7 @@ struct wacom { struct urb *irq; struct wacom_features *features; int tool[2]; + int id[2]; __u32 serial[2]; char phys[32]; }; @@ -136,7 +143,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) struct wacom *wacom = urb->context; unsigned char *data = wacom->data; struct input_dev *dev = wacom->dev; - int prox, pressure; + int prox, pressure, id; int retval; switch (urb->status) { @@ -163,6 +170,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) input_regs(dev, regs); + id = ERASER_DEVICE_ID; if (prox) { pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); @@ -177,11 +185,15 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) * an out of proximity for previous tool then a in for new tool. */ if (!wacom->tool[0]) { - /* Going into proximity select tool */ - wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + /* Eraser bit set for DTF */ + if (data[1] & 0x10) + wacom->tool[1] = BTN_TOOL_RUBBER; + else + /* Going into proximity select tool */ + wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; } else { /* was entered with stylus2 pressed */ - if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) { + if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { /* report out proximity for previous tool */ input_report_key(dev, wacom->tool[1], 0); input_sync(dev); @@ -192,8 +204,9 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) if (wacom->tool[1] != BTN_TOOL_RUBBER) { /* Unknown tool selected default to pen tool */ wacom->tool[1] = BTN_TOOL_PEN; + id = STYLUS_DEVICE_ID; } - input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */ + input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */ input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); input_report_abs(dev, ABS_PRESSURE, pressure); @@ -250,10 +263,10 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs) input_regs(dev, regs); if (data[1] & 0x04) { - input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20); + input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0); input_report_key(dev, BTN_TOUCH, data[1] & 0x08); } else { - input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20); + input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0); input_report_key(dev, BTN_TOUCH, data[1] & 0x01); } input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2])); @@ -299,7 +312,7 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs) } input_regs(dev, regs); - input_report_key(dev, BTN_TOOL_PEN, 1); + input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID); input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1])); input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3])); input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127); @@ -319,7 +332,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) struct wacom *wacom = urb->context; unsigned char *data = wacom->data; struct input_dev *dev = wacom->dev; - int x, y; + int x, y, id, rw; int retval; switch (urb->status) { @@ -344,6 +357,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) input_regs(dev, regs); + id = STYLUS_DEVICE_ID; if (data[1] & 0x10) { /* in prox */ switch ((data[1] >> 5) & 3) { @@ -354,18 +368,27 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) case 1: /* Rubber */ wacom->tool[0] = BTN_TOOL_RUBBER; + id = ERASER_DEVICE_ID; break; case 2: /* Mouse with wheel */ input_report_key(dev, BTN_MIDDLE, data[1] & 0x04); - input_report_rel(dev, REL_WHEEL, (signed char) data[6]); + if (wacom->features->type == G4) { + rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03); + input_report_rel(dev, REL_WHEEL, rw); + } else + input_report_rel(dev, REL_WHEEL, (signed char) data[6]); /* fall through */ case 3: /* Mouse without wheel */ wacom->tool[0] = BTN_TOOL_MOUSE; + id = CURSOR_DEVICE_ID; input_report_key(dev, BTN_LEFT, data[1] & 0x01); input_report_key(dev, BTN_RIGHT, data[1] & 0x02); - input_report_abs(dev, ABS_DISTANCE, data[7]); + if (wacom->features->type == G4) + input_report_abs(dev, ABS_DISTANCE, data[6]); + else + input_report_abs(dev, ABS_DISTANCE, data[7]); break; } } @@ -376,16 +399,50 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6])); + input_report_abs(dev, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); input_report_key(dev, BTN_TOUCH, data[1] & 0x01); input_report_key(dev, BTN_STYLUS, data[1] & 0x02); input_report_key(dev, BTN_STYLUS2, data[1] & 0x04); } } - input_report_key(dev, wacom->tool[0], data[1] & 0x10); + input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0); input_sync(dev); + /* send pad data */ + if (wacom->features->type == G4) { + /* fist time sending pad data */ + if (wacom->tool[1] != BTN_TOOL_FINGER) { + wacom->id[1] = 0; + wacom->serial[1] = (data[7] & 0x38) >> 2; + } + if (data[7] & 0xf8) { + input_report_key(dev, BTN_0, (data[7] & 0x40)); + input_report_key(dev, BTN_4, (data[7] & 0x80)); + if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e)) + /* alter REL_WHEEL value so X apps can get it */ + wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1; + else + wacom->serial[1] = (data[7] & 0x38 ) >> 2; + + /* don't alter the value when there is no wheel event */ + if (wacom->serial[1] == 1) + wacom->serial[1] = 0; + rw = wacom->serial[1]; + rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07); + input_report_rel(dev, REL_WHEEL, rw); + wacom->tool[1] = BTN_TOOL_FINGER; + wacom->id[1] = data[7] & 0xf8; + input_report_key(dev, wacom->tool[1], 0xf0); + input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + wacom->id[1] = 0; + wacom->serial[1] = 0; + input_report_key(dev, wacom->tool[1], 0); + input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); + } + input_sync(dev); + } exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) @@ -410,7 +467,8 @@ static int wacom_intuos_inout(struct urb *urb) (data[4] << 20) + (data[5] << 12) + (data[6] << 4) + (data[7] >> 4); - switch ((data[2] << 4) | (data[3] >> 4)) { + wacom->id[idx] = (data[2] << 4) | (data[3] >> 4); + switch (wacom->id[idx]) { case 0x812: /* Inking pen */ case 0x801: /* Intuos3 Inking pen */ case 0x012: @@ -458,7 +516,7 @@ static int wacom_intuos_inout(struct urb *urb) default: /* Unknown tool */ wacom->tool[idx] = BTN_TOOL_PEN; } - input_report_key(dev, wacom->tool[idx], 1); + input_report_key(dev, wacom->tool[idx], wacom->id[idx]); input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); input_sync(dev); return 1; @@ -637,7 +695,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs) } } - input_report_key(dev, wacom->tool[idx], 1); + input_report_key(dev, wacom->tool[idx], wacom->id[idx]); input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); input_sync(dev); @@ -655,6 +713,13 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, G4, wacom_graphire_irq }, + { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, G4, wacom_graphire_irq }, + { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, @@ -666,16 +731,20 @@ static struct wacom_features wacom_features[] = { { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq }, { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq }, { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq }, + { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq }, + { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq }, { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq }, + { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { } @@ -688,6 +757,13 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, @@ -699,16 +775,20 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } @@ -779,6 +859,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); switch (wacom->features->type) { + case G4: + input_dev->evbit[0] |= BIT(EV_MSC); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + /* fall through */ + case GRAPHIRE: input_dev->evbit[0] |= BIT(EV_REL); input_dev->relbit[0] |= BIT(REL_WHEEL); From d4ece29d89d424ea045753c639971429faa9ee58 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 17 Nov 2005 09:46:44 -0800 Subject: [PATCH 117/169] [PATCH] USB: fix 'unused variable' warning USB: fix 'unused variable' warning Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/core/message.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 644a3d4f12aa..208c6bd83a83 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1457,12 +1457,11 @@ int usb_set_configuration(struct usb_device *dev, int configuration) */ for (i = 0; i < nintf; ++i) { struct usb_interface *intf = cp->interface[i]; - struct usb_host_interface *alt = intf->cur_altsetting; dev_dbg (&dev->dev, "adding %s (config #%d, interface %d)\n", intf->dev.bus_id, configuration, - alt->desc.bInterfaceNumber); + intf->cur_altsetting->desc.bInterfaceNumber); ret = device_add (&intf->dev); if (ret != 0) { dev_err(&dev->dev, From c611d2cd2f74988baa9a4c6cfc8a48064fd075e6 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 17 Nov 2005 09:46:39 -0800 Subject: [PATCH 118/169] [PATCH] USB: Delete leftovers from bluetty driver This patch deletes the bluetooth.txt help file of the bluetty driver and hands over its major device nodes for character devices to the RFCOMM TTY implementation of the Bluetooth subsystem. Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- Documentation/devices.txt | 12 ++++----- Documentation/usb/bluetooth.txt | 44 --------------------------------- 2 files changed, 6 insertions(+), 50 deletions(-) delete mode 100644 Documentation/usb/bluetooth.txt diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 0f515175c72a..3c406acd4dfa 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -2903,14 +2903,14 @@ Your cooperation is appreciated. 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card -216 char USB BlueTooth devices - 0 = /dev/ttyUB0 First USB BlueTooth device - 1 = /dev/ttyUB1 Second USB BlueTooth device +216 char Bluetooth RFCOMM TTY devices + 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device + 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device ... -217 char USB BlueTooth devices (alternate devices) - 0 = /dev/cuub0 Callout device for ttyUB0 - 1 = /dev/cuub1 Callout device for ttyUB1 +217 char Bluetooth RFCOMM TTY devices (alternate devices) + 0 = /dev/curf0 Callout device for rfcomm0 + 1 = /dev/curf1 Callout device for rfcomm1 ... 218 char The Logical Company bus Unibus/Qbus adapters diff --git a/Documentation/usb/bluetooth.txt b/Documentation/usb/bluetooth.txt deleted file mode 100644 index 774f5d3835cc..000000000000 --- a/Documentation/usb/bluetooth.txt +++ /dev/null @@ -1,44 +0,0 @@ -INTRODUCTION - - The USB Bluetooth driver supports any USB Bluetooth device. - It currently works well with the Linux USB Bluetooth stack from Axis - (available at http://developer.axis.com/software/bluetooth/ ) and - has been rumored to work with other Linux USB Bluetooth stacks. - - -CONFIGURATION - - Currently the driver can handle up to 256 different USB Bluetooth - devices at once. - - If you are not using devfs: - The major number that the driver uses is 216 so to use the driver, - create the following nodes: - mknod /dev/ttyUB0 c 216 0 - mknod /dev/ttyUB1 c 216 1 - mknod /dev/ttyUB2 c 216 2 - mknod /dev/ttyUB3 c 216 3 - . - . - . - mknod /dev/ttyUB254 c 216 254 - mknod /dev/ttyUB255 c 216 255 - - If you are using devfs: - The devices supported by this driver will show up as - /dev/usb/ttub/{0,1,...} - - When the device is connected and recognized by the driver, the driver - will print to the system log, which node the device has been bound to. - - -CONTACT: - - If anyone has any problems using this driver, please contact me, or - join the Linux-USB mailing list (information on joining the mailing - list, as well as a link to its searchable archive is at - http://www.linux-usb.org/ ) - - -Greg Kroah-Hartman -greg@kroah.com From bc7cb323bab717660830211d50555dedf19e372e Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 17 Nov 2005 09:47:07 -0800 Subject: [PATCH 119/169] [PATCH] usbfs: usbfs_dir_inode_operations cleanup Signed-off-by: OGAWA Hirofumi Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/core/inode.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 12f490fdee8f..c44bbedec817 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -46,7 +46,6 @@ static struct super_operations usbfs_ops; static struct file_operations default_file_operations; -static struct inode_operations usbfs_dir_inode_operations; static struct vfsmount *usbfs_mount; static int usbfs_mount_count; /* = 0 */ static int ignore_mount = 0; @@ -262,7 +261,7 @@ static struct inode *usbfs_get_inode (struct super_block *sb, int mode, dev_t de inode->i_fop = &default_file_operations; break; case S_IFDIR: - inode->i_op = &usbfs_dir_inode_operations; + inode->i_op = &simple_dir_inode_operations; inode->i_fop = &simple_dir_operations; /* directory inodes start off with i_nlink == 2 (for "." entry) */ @@ -417,10 +416,6 @@ static struct file_operations default_file_operations = { .llseek = default_file_lseek, }; -static struct inode_operations usbfs_dir_inode_operations = { - .lookup = simple_lookup, -}; - static struct super_operations usbfs_ops = { .statfs = simple_statfs, .drop_inode = generic_delete_inode, From 777da5905e82695d1dd73eee6cfe50bd486d8fe9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 17 Nov 2005 09:47:02 -0800 Subject: [PATCH 120/169] [PATCH] USB: usbdevfs_ioctl 32bit fix drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast NFI if this is correct... Cc: Pete Zaitcev Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/core/devio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 942cd437dc48..ec138852848b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1392,7 +1392,7 @@ static int proc_ioctl_default(struct dev_state *ps, void __user *arg) } #ifdef CONFIG_COMPAT -static int proc_ioctl_compat(struct dev_state *ps, void __user *arg) +static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg) { struct usbdevfs_ioctl32 __user *uioc; struct usbdevfs_ioctl ctrl; @@ -1511,7 +1511,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd case USBDEVFS_IOCTL32: snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); - ret = proc_ioctl_compat(ps, p); + ret = proc_ioctl_compat(ps, (compat_uptr_t)(long)p); break; #endif From c5dbf868e2bbeea6581f388a09539779c0d61357 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 17 Nov 2005 09:47:11 -0800 Subject: [PATCH 121/169] [PATCH] USB: kill unneccessary usb-storage blacklist entries I actually have this device, and kernel reports blacklist entry is no longer neccessary. Signed-off-by: Pavel Machek Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/storage/unusual_devs.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 9e926a8f2116..103364b99307 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -710,11 +710,6 @@ UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, "DIMAGE E223", US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), -UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100, - "Hagiwara", - "FlashGate SmartMedia", - US_SC_SCSI, US_PR_BULK, NULL, 0 ), - UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, "Hagiwara", "Flashgate", From b0ce84d5539de88a1001f9aa3deeaa20fde3d152 Mon Sep 17 00:00:00 2001 From: Josef Balatka Date: Thu, 17 Nov 2005 09:47:24 -0800 Subject: [PATCH 122/169] [PATCH] USB: cp2101.c: Jablotron usb serial interface identification Jablotron usb serial interface identification Signed-off-by: Josef Balatka Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index c5334dd89b12..c9787001cf2a 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -60,6 +60,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { } /* Terminating Entry */ }; From c9d00fc148b210aa8cf388d6e1eac187a0e855a6 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 17 Nov 2005 09:47:28 -0800 Subject: [PATCH 123/169] [PATCH] USB: onetouch doesn't suspend yet The onetouch support doesn't suspend correctly (leaves an interrupt URB posted, instead of unlinking it) so for now just disable it when PM is in the air. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/storage/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 1a9679f76f5a..c41d64dbb0f0 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -115,7 +115,7 @@ config USB_STORAGE_JUMPSHOT config USB_STORAGE_ONETOUCH bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" - depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL + depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM help Say Y here to include additional code to support the Maxtor OneTouch USB hard drive's onetouch button. From a8310f3b8b713e52d77c56d4b8865685ee40d02a Mon Sep 17 00:00:00 2001 From: Luiz Fernando Capitulino Date: Thu, 17 Nov 2005 09:47:32 -0800 Subject: [PATCH 124/169] [PATCH] USB: pl2303: adds new IDs. This patch adds two new Siemens mobiles IDs for the pl2303 driver. Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/pl2303.c | 2 ++ drivers/usb/serial/pl2303.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 165c119bf10e..f6ce321a8655 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -71,7 +71,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) }, { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) }, { } /* Terminating entry */ diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 7be9644f5a03..21d434d81813 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -54,7 +54,9 @@ #define SAMSUNG_PRODUCT_ID 0x8001 #define SIEMENS_VENDOR_ID 0x11f5 +#define SIEMENS_PRODUCT_ID_SX1 0x0001 #define SIEMENS_PRODUCT_ID_X65 0x0003 +#define SIEMENS_PRODUCT_ID_X75 0x0004 #define SYNTECH_VENDOR_ID 0x0745 #define SYNTECH_PRODUCT_ID 0x0001 From b8f4c1d6674463e5824eada1ad7ec799276718bd Mon Sep 17 00:00:00 2001 From: Luiz Fernando Capitulino Date: Thu, 17 Nov 2005 09:47:36 -0800 Subject: [PATCH 125/169] [PATCH] USB: pl2303: updates pl2303_update_line_status() Updates pl2303_update_line_status() to handle X75 and SX1 Siemens mobiles Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/pl2303.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index f6ce321a8655..41a45a5025b2 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -813,7 +813,9 @@ static void pl2303_update_line_status(struct usb_serial_port *port, u8 length = UART_STATE; if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && - (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65)) { + (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 || + le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 || + le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) { length = 1; status_idx = 0; } From 9142d59a451731d23539d218c962418acc93283c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 17 Nov 2005 09:47:41 -0800 Subject: [PATCH 126/169] [PATCH] USB: Adapt microtek driver to new scsi features the scsi layer now uses very short sg lists. This breaks the microtek driver. Here is a patch fixes this and some other issues. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/image/microtek.c | 35 +++++++++++++++++++++++++++-------- drivers/usb/image/microtek.h | 2 +- 2 files changed, 28 insertions(+), 9 deletions(-) diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 61a2604cce4f..950543aa5ac7 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -327,6 +327,18 @@ static inline void mts_urb_abort(struct mts_desc* desc) { usb_kill_urb( desc->urb ); } +static int mts_slave_alloc (struct scsi_device *s) +{ + s->inquiry_len = 0x24; + return 0; +} + +static int mts_slave_configure (struct scsi_device *s) +{ + blk_queue_dma_alignment(s->request_queue, (512 - 1)); + return 0; +} + static int mts_scsi_abort (Scsi_Cmnd *srb) { struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); @@ -411,7 +423,7 @@ static void mts_transfer_done( struct urb *transfer, struct pt_regs *regs ) MTS_INT_INIT(); context->srb->result &= MTS_SCSI_ERR_MASK; - context->srb->result |= (unsigned)context->status<<1; + context->srb->result |= (unsigned)(*context->scsi_status)<<1; mts_transfer_cleanup(transfer); @@ -427,7 +439,7 @@ static void mts_get_status( struct urb *transfer ) mts_int_submit_urb(transfer, usb_rcvbulkpipe(context->instance->usb_dev, context->instance->ep_response), - &context->status, + context->scsi_status, 1, mts_transfer_done ); } @@ -481,7 +493,7 @@ static void mts_command_done( struct urb *transfer, struct pt_regs *regs ) context->data_pipe, context->data, context->data_length, - context->srb->use_sg ? mts_do_sg : mts_data_done); + context->srb->use_sg > 1 ? mts_do_sg : mts_data_done); } else { mts_get_status(transfer); } @@ -627,7 +639,6 @@ int mts_scsi_queuecommand( Scsi_Cmnd *srb, mts_scsi_cmnd_callback callback ) callback(srb); } - out: return err; } @@ -645,6 +656,9 @@ static struct scsi_host_template mts_scsi_host_template = { .cmd_per_lun = 1, .use_clustering = 1, .emulated = 1, + .slave_alloc = mts_slave_alloc, + .slave_configure = mts_slave_configure, + .max_sectors= 256, /* 128 K */ }; struct vendor_product @@ -771,8 +785,8 @@ static int mts_usb_probe(struct usb_interface *intf, MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" ); return -ENODEV; } - - + + new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL); if (!new_desc) goto out; @@ -781,6 +795,10 @@ static int mts_usb_probe(struct usb_interface *intf, if (!new_desc->urb) goto out_kfree; + new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL); + if (!new_desc->context.scsi_status) + goto out_kfree2; + new_desc->usb_dev = dev; new_desc->usb_intf = intf; init_MUTEX(&new_desc->lock); @@ -817,6 +835,8 @@ static int mts_usb_probe(struct usb_interface *intf, usb_set_intfdata(intf, new_desc); return 0; + out_kfree2: + kfree(new_desc->context.scsi_status); out_free_urb: usb_free_urb(new_desc->urb); out_kfree: @@ -836,6 +856,7 @@ static void mts_usb_disconnect (struct usb_interface *intf) scsi_host_put(desc->host); usb_free_urb(desc->urb); + kfree(desc->context.scsi_status); kfree(desc); } @@ -856,5 +877,3 @@ module_exit(microtek_drv_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL"); - - diff --git a/drivers/usb/image/microtek.h b/drivers/usb/image/microtek.h index 3271deb8c001..926d4bdc6746 100644 --- a/drivers/usb/image/microtek.h +++ b/drivers/usb/image/microtek.h @@ -22,7 +22,7 @@ struct mts_transfer_context int data_pipe; int fragment; - u8 status; /* status returned from ep_response after command completion */ + u8 *scsi_status; /* status returned from ep_response after command completion */ }; From 8845add380854ffce5268714a093df8c80b4a6e2 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 17 Nov 2005 09:48:01 -0800 Subject: [PATCH 127/169] [PATCH] usb-storage: Fix detection of kodak flash readers in shuttle_usbat driver Peter Favrholdt reported that his Kodak flash device was getting detected as a CDROM, and he helped me track this down to the fact that the device takes a long time (approx 440ms!) to reset. This patch increases the delay to 500ms, which solves the problem. Signed-off-by: Daniel Drake Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/storage/shuttle_usbat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 33c55a6261bb..fea176d7e79a 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -853,7 +853,7 @@ static int usbat_identify_device(struct us_data *us, rc = usbat_device_reset(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - msleep(25); + msleep(500); /* * In attempt to distinguish between HP CDRW's and Flash readers, we now From d23b536bb715673ca0ccbdaac2b6ce2c001d06e9 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 17 Nov 2005 09:47:45 -0800 Subject: [PATCH 128/169] [PATCH] USB: fix race in kaweth disconnect this patch from Herbert Xu fixes a race by moving termination of the URBs into close() exclusively. Signed-off-by: Herbert Xu Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/net/kaweth.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index 6bef1be6b36c..b5776518020f 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -219,7 +219,6 @@ struct kaweth_device __u32 status; int end; - int removed; int suspend_lowmem_rx; int suspend_lowmem_ctrl; int linkstate; @@ -699,6 +698,7 @@ static int kaweth_close(struct net_device *net) usb_kill_urb(kaweth->irq_urb); usb_kill_urb(kaweth->rx_urb); + usb_kill_urb(kaweth->tx_urb); flush_scheduled_work(); @@ -750,13 +750,6 @@ static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net) spin_lock(&kaweth->device_lock); - if (kaweth->removed) { - /* our device is undergoing disconnection - we bail out */ - spin_unlock(&kaweth->device_lock); - dev_kfree_skb_irq(skb); - return 0; - } - kaweth_async_set_rx_mode(kaweth); netif_stop_queue(net); @@ -1136,10 +1129,6 @@ static void kaweth_disconnect(struct usb_interface *intf) return; } netdev = kaweth->net; - kaweth->removed = 1; - usb_kill_urb(kaweth->irq_urb); - usb_kill_urb(kaweth->rx_urb); - usb_kill_urb(kaweth->tx_urb); kaweth_dbg("Unregistering net device"); unregister_netdev(netdev); From 058120d70ebb430e27ad55871429028361c5baed Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 17 Nov 2005 09:47:49 -0800 Subject: [PATCH 129/169] [PATCH] usb devio warning fix drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/core/devio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index ec138852848b..b1d6e9af732d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1398,7 +1398,7 @@ static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg) struct usbdevfs_ioctl ctrl; u32 udata; - uioc = compat_ptr(arg); + uioc = compat_ptr((long)arg); if (get_user(ctrl.ifno, &uioc->ifno) || get_user(ctrl.ioctl_code, &uioc->ioctl_code) || __get_user(udata, &uioc->data)) From 9465663965fbe7de4e21d090e8eb0cc34b65294f Mon Sep 17 00:00:00 2001 From: Antti Andreimann Date: Thu, 17 Nov 2005 09:47:53 -0800 Subject: [PATCH 130/169] [PATCH] USB: Maxtor OneTouch button support for older drives This small patch adds a device ID used by older Maxtor OneTouch drives (the ones with blue face-plate instead of the fancy silver one used in newer models). The button on those drives works well with the current driver. From: Antti Andreimann Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/storage/unusual_devs.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 103364b99307..0a9858f69a9b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1003,6 +1003,11 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, * */ #ifdef CONFIG_USB_STORAGE_ONETOUCH + UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, + 0), UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999, "Maxtor", "OneTouch External Harddrive", From 87cf203935a646d5fb00464dc5887292da71d928 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 17 Nov 2005 09:47:57 -0800 Subject: [PATCH 131/169] [PATCH] USB: OHCI lh7a404 platform device conversion fixup Fix an error in the OHCI lh7a404 driver after the platform device conversion. Signed-off-by: Richard Purdie Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/host/ohci-lh7a404.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 081ec3f5cff4..3959ccc88332 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -219,7 +219,7 @@ static int ohci_hcd_lh7a404_drv_probe(struct platform_device *pdev) static int ohci_hcd_lh7a404_drv_remove(struct platform_device *pdev) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_lh7a404_remove(hcd, pdev); return 0; From 654f31189e550cd5924b786487a5d93d9feaada9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Nov 2005 09:48:09 -0800 Subject: [PATCH 132/169] [PATCH] USB: move CONFIG_USB_DEBUG checks into the Makefile This lets us remove a lot of code in the drivers that were all checking the same thing. It also found some bugs in a few of the drivers, which has been fixed up. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/atm/Makefile | 4 ++++ drivers/usb/atm/usbatm.h | 5 ----- drivers/usb/core/Makefile | 4 ++++ drivers/usb/core/buffer.c | 8 -------- drivers/usb/core/config.c | 5 ----- drivers/usb/core/file.c | 6 ------ drivers/usb/core/hcd-pci.c | 7 ------- drivers/usb/core/hcd.c | 5 ----- drivers/usb/core/hub.c | 5 ----- drivers/usb/core/message.c | 7 ------- drivers/usb/core/notify.c | 6 ------ drivers/usb/core/sysfs.c | 7 ------- drivers/usb/core/urb.c | 6 ------ drivers/usb/core/usb.c | 7 ------- drivers/usb/input/Makefile | 4 ++++ drivers/usb/input/itmtouch.c | 7 ------- drivers/usb/input/keyspan_remote.c | 5 +++-- drivers/usb/input/mtouchusb.c | 7 ------- drivers/usb/input/pid.c | 2 -- drivers/usb/input/touchkitusb.c | 4 ---- drivers/usb/misc/Makefile | 6 +++++- drivers/usb/misc/auerswald.c | 1 - drivers/usb/misc/phidgetservo.c | 3 --- drivers/usb/misc/rio500.c | 2 +- drivers/usb/misc/usbled.c | 3 --- drivers/usb/misc/usbtest.c | 3 --- drivers/usb/misc/uss720.c | 2 -- drivers/usb/net/Makefile | 4 ++++ drivers/usb/net/asix.c | 3 --- drivers/usb/net/cdc_ether.c | 3 --- drivers/usb/net/cdc_subset.c | 3 --- drivers/usb/net/gl620a.c | 3 --- drivers/usb/net/net1080.c | 3 --- drivers/usb/net/pegasus.c | 2 -- drivers/usb/net/plusb.c | 3 --- drivers/usb/net/rndis_host.c | 3 --- drivers/usb/net/usbnet.c | 3 --- drivers/usb/net/zaurus.c | 3 --- 38 files changed, 25 insertions(+), 139 deletions(-) diff --git a/drivers/usb/atm/Makefile b/drivers/usb/atm/Makefile index 751f297be2ef..85099718c683 100644 --- a/drivers/usb/atm/Makefile +++ b/drivers/usb/atm/Makefile @@ -6,3 +6,7 @@ obj-$(CONFIG_USB_CXACRU) += cxacru.o obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o obj-$(CONFIG_USB_ATM) += usbatm.o obj-$(CONFIG_USB_XUSBATM) += xusbatm.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h index 936646457935..1adacd60d713 100644 --- a/drivers/usb/atm/usbatm.h +++ b/drivers/usb/atm/usbatm.h @@ -27,14 +27,9 @@ #include /* -#define DEBUG #define VERBOSE_DEBUG */ -#if !defined (DEBUG) && defined (CONFIG_USB_DEBUG) -# define DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index dd1c4d2a0c31..86d5c380892d 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -14,3 +14,7 @@ ifeq ($(CONFIG_USB_DEVICEFS),y) endif obj-$(CONFIG_USB) += usbcore.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 57e800ac3cee..419c9943a7cb 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -15,14 +15,6 @@ #include #include #include - - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include "hcd.h" diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 993019500cc3..a9d89c78cc20 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1,9 +1,4 @@ #include - -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index e695308095ae..37b13368c814 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -19,12 +19,6 @@ #include #include #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include #include "usb.h" diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 84d9e69329bb..7feb829362d6 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -17,13 +17,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6c7ca5b08cd6..5e5f65a475ab 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -23,11 +23,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 256d9f698715..840727948d84 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -9,11 +9,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include #include #include diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 208c6bd83a83..fe74f99ca5f4 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -3,13 +3,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include /* for scatterlist macros */ #include #include diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c index 37da059eced7..fbbebab52fbd 100644 --- a/drivers/usb/core/notify.c +++ b/drivers/usb/core/notify.c @@ -12,13 +12,7 @@ #include #include #include -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include - #include "usb.h" diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index edd83e014452..71d881327e88 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -12,14 +12,7 @@ #include #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include - #include "usb.h" /* endpoint stuff */ diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index f2a1fed2a802..081796726b95 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -4,12 +4,6 @@ #include #include #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include #include "hcd.h" diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0eefff7bcb3c..e197ce9353de 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -22,13 +22,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 5e03b93f29f6..07cb17db42fc 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -42,3 +42,7 @@ obj-$(CONFIG_USB_ACECAD) += acecad.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index 3b581853cf10..4a50acb39d29 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -40,13 +40,6 @@ *****************************************************************************/ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index 5b8d65f62abf..a32cfe51b77d 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -160,7 +160,8 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) * though so it's not too big a deal */ if (dev->data.pos >= dev->data.len) { - dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n", + dev_dbg(&dev->udev->dev, + "%s - Error ran out of data. pos: %d, len: %d\n", __FUNCTION__, dev->data.pos, dev->data.len); return -1; } @@ -306,7 +307,7 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs) err("Bad message recieved, no stop bit found.\n"); } - dev_dbg(&remote->udev, + dev_dbg(&remote->udev->dev, "%s found valid message: system: %d, button: %d, toggle: %d\n", __FUNCTION__, message.system, message.button, message.toggle); diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index 7fce526560ca..52cc18cd247d 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -40,13 +40,6 @@ *****************************************************************************/ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c index dca5ee93a4ef..19e015d171aa 100644 --- a/drivers/usb/input/pid.c +++ b/drivers/usb/input/pid.c @@ -37,8 +37,6 @@ #include "hid.h" #include "pid.h" -#define DEBUG - #define CHECK_OWNERSHIP(i, hid_pid) \ ((i) < FF_EFFECTS_MAX && i >= 0 && \ test_bit(FF_PID_FLAGS_USED, &hid_pid->effects[(i)].flags) && \ diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 0043e6ebcd1f..7420c6b84284 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -30,10 +30,6 @@ #include #include #include - -#if !defined(DEBUG) && defined(CONFIG_USB_DEBUG) -#define DEBUG -#endif #include #include diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 862e40a83689..6c693bc68e2e 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -18,4 +18,8 @@ obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_USS720) += uss720.o -obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ \ No newline at end of file +obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index 5f33f7c64885..2a28ceeaa66a 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -30,7 +30,6 @@ #include #include #include -#undef DEBUG /* include debug macros until it's done */ #include /*-------------------------------------------------------------------*/ diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c index b84eda631ab5..a30d4a6ee824 100644 --- a/drivers/usb/misc/phidgetservo.c +++ b/drivers/usb/misc/phidgetservo.c @@ -26,9 +26,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -#define DEBUG 1 -#endif #include #include #include diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 7d02d8ec6b1a..9590dbac5d9a 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -393,7 +393,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) ibuf, this_read, &partial, 8000); - dbg(KERN_DEBUG "read stats: result:%d this_read:%u partial:%u", + dbg("read stats: result:%d this_read:%u partial:%u", result, this_read, partial); if (partial) { diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index f6ba4c788dbc..3c93921cb6b3 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -10,9 +10,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG - #define DEBUG 1 -#endif #include #include #include diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 2997f558159b..605a2afe34ed 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1,7 +1,4 @@ #include -#if !defined (DEBUG) && defined (CONFIG_USB_DEBUG) -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 0592cb5e6c4d..1cabe7ed91f5 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -41,8 +41,6 @@ /*****************************************************************************/ -#define DEBUG - #include #include #include diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile index 222c0495f791..a21e6eaabaf6 100644 --- a/drivers/usb/net/Makefile +++ b/drivers/usb/net/Makefile @@ -16,3 +16,7 @@ obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_ZD1201) += zd1201.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 252a34fbb42c..542120ef1fd2 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -23,9 +23,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c index 652b04bbf6af..c008c981862b 100644 --- a/drivers/usb/net/cdc_ether.c +++ b/drivers/usb/net/cdc_ether.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c index f1730b685fd2..f05cfb83c82d 100644 --- a/drivers/usb/net/cdc_subset.c +++ b/drivers/usb/net/cdc_subset.c @@ -18,9 +18,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index c0f263b202a6..2455e9a85674 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -22,9 +22,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index cee55f8cf64f..b3799b1a2b0d 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 537eb181d985..683e3df5d607 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -28,8 +28,6 @@ * is out of the interrupt routine. */ -#undef DEBUG - #include #include #include diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c index 74c2b3581c76..89856aa0e3b8 100644 --- a/drivers/usb/net/plusb.c +++ b/drivers/usb/net/plusb.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index b5a925dc1beb..c0ecbab6f6ba 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 74f05c9c84d5..362d6907c9bb 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -34,9 +34,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index 5d4b7d55b097..680d13957af4 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include From 2d117403ae4006eeeb9037b82e9ecd8b3b043584 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Nov 2005 09:48:13 -0800 Subject: [PATCH 133/169] [PATCH] USB: delete the nokia_dku2 driver It was causing too many problems, and this is not the proper type of driver for this device. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/Kconfig | 9 -- drivers/usb/serial/Makefile | 1 - drivers/usb/serial/nokia_dku2.c | 142 -------------------------------- 3 files changed, 152 deletions(-) delete mode 100644 drivers/usb/serial/nokia_dku2.c diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 7b5e8e4ee2bb..9438909e87a5 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -394,15 +394,6 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. -config USB_SERIAL_NOKIA_DKU2 - tristate "USB Nokia DKU2 Driver" - depends on USB_SERIAL - help - Say Y here if you want to use a Nokia DKU2 device. - - To compile this driver as a module, choose M here: the - module will be called nokia_dku2. - config USB_SERIAL_PL2303 tristate "USB Prolific 2303 Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 55fd461793b7..6c7cdcc99a9e 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -31,7 +31,6 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o -obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c deleted file mode 100644 index fad01bef3a64..000000000000 --- a/drivers/usb/serial/nokia_dku2.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Nokia DKU2 USB driver - * - * Copyright (C) 2004 - * Author: C Kemp - * - * This program is largely derived from work by the linux-usb group - * and associated source files. Please see the usb/serial files for - * individual credits and copyrights. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * 20.09.2005 - Matthias Blaesing - * Added short name to device structure to make driver load into kernel 2.6.13 - * - * 20.09.2005 - Matthias Blaesing - * Added usb_deregister to exit code - to allow remove and reinsert of module - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "usb-serial.h" - - -#define NOKIA_VENDOR_ID 0x0421 -#define NOKIA7600_PRODUCT_ID 0x0400 -#define NOKIA6230_PRODUCT_ID 0x040f -#define NOKIA6170_PRODUCT_ID 0x0416 -#define NOKIA6670_PRODUCT_ID 0x041d -#define NOKIA6680_PRODUCT_ID 0x041e -#define NOKIA6230i_PRODUCT_ID 0x0428 - -#define NOKIA_AT_PORT 0x82 -#define NOKIA_FBUS_PORT 0x86 - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.2" -#define DRIVER_AUTHOR "C Kemp" -#define DRIVER_DESC "Nokia DKU2 Driver" - -static struct usb_device_id id_table [] = { - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* The only thing which makes this device different from a generic - * device is that we have to set an alternative configuration to make - * the relevant endpoints available. In 2.6 this is really easy... */ -static int nokia_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - int retval = -ENODEV; - - if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) { - /* the AT port */ - dev_info(&serial->dev->dev, "Nokia AT Port:\n"); - retval = 0; - } else if (serial->interface->num_altsetting == 2 && - serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) { - /* the FBUS port */ - dev_info(&serial->dev->dev, "Nokia FBUS Port:\n"); - usb_set_interface(serial->dev, 10, 1); - retval = 0; - } - - return retval; -} - -static struct usb_driver nokia_driver = { - .owner = THIS_MODULE, - .name = "nokia_dku2", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, -}; - -static struct usb_serial_driver nokia_serial_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "nokia_dku2", - }, - .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver", - .id_table = id_table, - .num_interrupt_in = 1, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .probe = nokia_probe, -}; - -static int __init nokia_init(void) -{ - int retval; - - retval = usb_serial_register(&nokia_serial_driver); - if (retval) - return retval; - - retval = usb_register(&nokia_driver); - if (retval) { - usb_serial_deregister(&nokia_serial_driver); - return retval; - } - - info(DRIVER_VERSION " " DRIVER_AUTHOR); - info(DRIVER_DESC); - - return retval; -} - -static void __exit nokia_exit(void) -{ - usb_deregister(&nokia_driver); - usb_serial_deregister(&nokia_serial_driver); -} - -module_init(nokia_init); -module_exit(nokia_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); From bb833986674ce1fc1b237b3d81459511ad2df393 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Nov 2005 09:48:18 -0800 Subject: [PATCH 134/169] [PATCH] USB: add the anydata usb-serial driver Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/Kconfig | 9 +++ drivers/usb/serial/Makefile | 1 + drivers/usb/serial/anydata.c | 123 +++++++++++++++++++++++++++++++++++ drivers/usb/serial/generic.c | 1 + 4 files changed, 134 insertions(+) create mode 100644 drivers/usb/serial/anydata.c diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9438909e87a5..14f55fd26a64 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -62,6 +62,15 @@ config USB_SERIAL_AIRPRIME To compile this driver as a module, choose M here: the module will be called airprime. +config USB_SERIAL_ANYDATA + tristate "USB AnyData CDMA Wireless Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a AnyData CDMA device. + + To compile this driver as a module, choose M here: the + module will be called anydata. + config USB_SERIAL_BELKIN tristate "USB Belkin and Peracom Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 6c7cdcc99a9e..f0b04420cea1 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -12,6 +12,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o +obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c new file mode 100644 index 000000000000..18022a74a3dc --- /dev/null +++ b/drivers/usb/serial/anydata.c @@ -0,0 +1,123 @@ +/* + * AnyData CDMA Serial USB driver + * + * Copyright (C) 2005 Greg Kroah-Hartman + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include "usb-serial.h" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */ + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* if overridden by the user, then use their value for the size of the + * read and write urbs */ +static int buffer_size; +static int debug; + +static struct usb_driver anydata_driver = { + .owner = THIS_MODULE, + .name = "anydata", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static int anydata_open(struct usb_serial_port *port, struct file *filp) +{ + char *buffer; + int result = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (buffer_size) { + /* override the default buffer sizes */ + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!buffer) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + kfree (port->read_urb->transfer_buffer); + port->read_urb->transfer_buffer = buffer; + port->read_urb->transfer_buffer_length = buffer_size; + + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!buffer) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + kfree (port->write_urb->transfer_buffer); + port->write_urb->transfer_buffer = buffer; + port->write_urb->transfer_buffer_length = buffer_size; + port->bulk_out_size = buffer_size; + } + + /* Start reading from the device */ + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + usb_serial_generic_write_bulk_callback, port); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __FUNCTION__, result); + + return result; +} + +static struct usb_serial_driver anydata_device = { + .driver = { + .owner = THIS_MODULE, + .name = "anydata", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, + .open = anydata_open, +}; + +static int __init anydata_init(void) +{ + int retval; + + retval = usb_serial_register(&anydata_device); + if (retval) + return retval; + retval = usb_register(&anydata_driver); + if (retval) + usb_serial_deregister(&anydata_device); + return retval; +} + +static void __exit anydata_exit(void) +{ + usb_deregister(&anydata_driver); + usb_serial_deregister(&anydata_device); +} + +module_init(anydata_init); +module_exit(anydata_exit); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); +module_param(buffer_size, int, 0); +MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers"); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 8909208f506a..53a47c31cd0e 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -309,6 +309,7 @@ void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *re schedule_work(&port->work); } +EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback); void usb_serial_generic_shutdown (struct usb_serial *serial) { From 6b1de9161e973bac8c4675db608fe4f38d2689bd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 17 Nov 2005 21:35:02 +0100 Subject: [PATCH 135/169] [PATCH] VM: fix zone list restart in page allocatate We must reassign z before looping through the zones kicking kswapd, since it will be NULL if we hit an OOM condition and jump back to the beginning again. 'z' is initially assigned before the restart: label. So move the restart label up a little. Signed-off-by: Jens Axboe --- mm/page_alloc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 104e69ca55e0..bd4de592dc23 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -845,21 +845,22 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order, might_sleep_if(wait); +restart: z = zonelist->zones; /* the list of zones suitable for gfp_mask */ if (unlikely(*z == NULL)) { /* Should this ever happen?? */ return NULL; } -restart: + page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order, zonelist, ALLOC_CPUSET); if (page) goto got_pg; - do + do { wakeup_kswapd(*z, order); - while (*(++z)); + } while (*(++z)); /* * OK, we're below the kswapd watermark and have kicked background From bd6af700a7191f483f41706467033588f28c8877 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 17 Nov 2005 14:11:18 -0800 Subject: [PATCH 136/169] [TCP]: TCP highspeed build error There is a compile error that crept in with the last patch of TCP patches. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/tcp_highspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_highspeed.c b/net/ipv4/tcp_highspeed.c index 82b3c189bd7d..63cf7e540847 100644 --- a/net/ipv4/tcp_highspeed.c +++ b/net/ipv4/tcp_highspeed.c @@ -111,7 +111,7 @@ static void hstcp_init(struct sock *sk) } static void hstcp_cong_avoid(struct sock *sk, u32 adk, u32 rtt, - u32 in_flight, u32 pkts_acked) + u32 in_flight, int data_acked) { struct tcp_sock *tp = tcp_sk(sk); struct hstcp *ca = inet_csk_ca(sk); From d5ea655376c471731845735dfe9a0bdfbe4492e9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 17 Nov 2005 15:04:34 -0800 Subject: [PATCH 137/169] [COMPAT]: Add ext3 ioctl translations. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So things like on-line resizing et al. work. Based almost entirely upon a patch by Guido Günther Signed-off-by: David S. Miller --- fs/compat_ioctl.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index f07e60f9e102..991c00de5c4e 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -49,6 +49,8 @@ #include #include #include +#include +#include #include #include #include @@ -134,6 +136,15 @@ /* Aiee. Someone does not find a difference between int and long */ #define EXT2_IOC32_GETFLAGS _IOR('f', 1, int) #define EXT2_IOC32_SETFLAGS _IOW('f', 2, int) +#define EXT3_IOC32_GETVERSION _IOR('f', 3, int) +#define EXT3_IOC32_SETVERSION _IOR('f', 4, int) +#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int) +#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int) +#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) +#ifdef CONFIG_JBD_DEBUG +#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int) +#endif + #define EXT2_IOC32_GETVERSION _IOR('v', 1, int) #define EXT2_IOC32_SETVERSION _IOW('v', 2, int) @@ -180,6 +191,22 @@ static int do_ext2_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg) return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg)); } +static int do_ext3_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + /* These are just misnamed, they actually get/put from/to user an int */ + switch (cmd) { + case EXT3_IOC32_GETVERSION: cmd = EXT3_IOC_GETVERSION; break; + case EXT3_IOC32_SETVERSION: cmd = EXT3_IOC_SETVERSION; break; + case EXT3_IOC32_GETRSVSZ: cmd = EXT3_IOC_GETRSVSZ; break; + case EXT3_IOC32_SETRSVSZ: cmd = EXT3_IOC_SETRSVSZ; break; + case EXT3_IOC32_GROUP_EXTEND: cmd = EXT3_IOC_GROUP_EXTEND; break; +#ifdef CONFIG_JBD_DEBUG + case EXT3_IOC32_WAIT_FOR_READONLY: cmd = EXT3_IOC_WAIT_FOR_READONLY; break; +#endif + } + return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg)); +} + struct video_tuner32 { compat_int_t tuner; char name[32]; @@ -2981,6 +3008,15 @@ HANDLE_IOCTL(EXT2_IOC32_GETFLAGS, do_ext2_ioctl) HANDLE_IOCTL(EXT2_IOC32_SETFLAGS, do_ext2_ioctl) HANDLE_IOCTL(EXT2_IOC32_GETVERSION, do_ext2_ioctl) HANDLE_IOCTL(EXT2_IOC32_SETVERSION, do_ext2_ioctl) +HANDLE_IOCTL(EXT3_IOC32_GETVERSION, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_SETVERSION, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_GETRSVSZ, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_SETRSVSZ, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_GROUP_EXTEND, do_ext3_ioctl) +COMPATIBLE_IOCTL(EXT3_IOC_GROUP_ADD) +#ifdef CONFIG_JBD_DEBUG +HANDLE_IOCTL(EXT3_IOC32_WAIT_FOR_READONLY, do_ext3_ioctl) +#endif HANDLE_IOCTL(VIDIOCGTUNER32, do_video_ioctl) HANDLE_IOCTL(VIDIOCSTUNER32, do_video_ioctl) HANDLE_IOCTL(VIDIOCGWIN32, do_video_ioctl) From 2fce76afdb067fa3e7f8ee33c9fe366bd65887ea Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Thu, 17 Nov 2005 15:06:47 -0800 Subject: [PATCH 138/169] [NETFILTER] ip_conntrack: fix ftp/irc/tftp helpers on ports >= 32768 Since we've converted the ftp/irc/tftp helpers to use the new module_parm_array() some time ago, we ware accidentially using signed data types - thus preventing those modules from being used on ports >= 32768. This patch fixes it by using 'ushort' module parameters. Thanks to Jan Nijs for reporting this bug. Signed-off-by: Harald Welte Signed-off-by: David S. Miller --- net/ipv4/netfilter/ip_conntrack_ftp.c | 4 ++-- net/ipv4/netfilter/ip_conntrack_irc.c | 4 ++-- net/ipv4/netfilter/ip_conntrack_tftp.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/netfilter/ip_conntrack_ftp.c b/net/ipv4/netfilter/ip_conntrack_ftp.c index d77d6b3f5f80..59e12b02b22c 100644 --- a/net/ipv4/netfilter/ip_conntrack_ftp.c +++ b/net/ipv4/netfilter/ip_conntrack_ftp.c @@ -29,9 +29,9 @@ static char *ftp_buffer; static DEFINE_SPINLOCK(ip_ftp_lock); #define MAX_PORTS 8 -static short ports[MAX_PORTS]; +static unsigned short ports[MAX_PORTS]; static int ports_c; -module_param_array(ports, short, &ports_c, 0400); +module_param_array(ports, ushort, &ports_c, 0400); static int loose; module_param(loose, int, 0600); diff --git a/net/ipv4/netfilter/ip_conntrack_irc.c b/net/ipv4/netfilter/ip_conntrack_irc.c index 15457415a4f3..2dea1db14406 100644 --- a/net/ipv4/netfilter/ip_conntrack_irc.c +++ b/net/ipv4/netfilter/ip_conntrack_irc.c @@ -34,7 +34,7 @@ #include #define MAX_PORTS 8 -static short ports[MAX_PORTS]; +static unsigned short ports[MAX_PORTS]; static int ports_c; static int max_dcc_channels = 8; static unsigned int dcc_timeout = 300; @@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ip_nat_irc_hook); MODULE_AUTHOR("Harald Welte "); MODULE_DESCRIPTION("IRC (DCC) connection tracking helper"); MODULE_LICENSE("GPL"); -module_param_array(ports, short, &ports_c, 0400); +module_param_array(ports, ushort, &ports_c, 0400); MODULE_PARM_DESC(ports, "port numbers of IRC servers"); module_param(max_dcc_channels, int, 0400); MODULE_PARM_DESC(max_dcc_channels, "max number of expected DCC channels per IRC session"); diff --git a/net/ipv4/netfilter/ip_conntrack_tftp.c b/net/ipv4/netfilter/ip_conntrack_tftp.c index a78736b8525d..d3c5a371f993 100644 --- a/net/ipv4/netfilter/ip_conntrack_tftp.c +++ b/net/ipv4/netfilter/ip_conntrack_tftp.c @@ -26,9 +26,9 @@ MODULE_DESCRIPTION("tftp connection tracking helper"); MODULE_LICENSE("GPL"); #define MAX_PORTS 8 -static short ports[MAX_PORTS]; +static unsigned short ports[MAX_PORTS]; static int ports_c; -module_param_array(ports, short, &ports_c, 0400); +module_param_array(ports, ushort, &ports_c, 0400); MODULE_PARM_DESC(ports, "port numbers of tftp servers"); #if 0 From 381998241fd1fc635596f4e8ae835f0d64ca1ba2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 17 Nov 2005 15:17:42 -0800 Subject: [PATCH 139/169] [LLC]: Fix compiler warnings introduced by TX window scaling changes. Noticed by Olaf Hering. The comparisons want a u8 here (the data type on the left-hand branch is a u8 structure member, and the constant on the right-hand branch is "~((u8) 128)"), but C turns it into an integer so we get: net/llc/llc_c_ac.c: In function `llc_conn_ac_inc_npta_value': net/llc/llc_c_ac.c:998: warning: comparison is always true due to limited range of data type net/llc/llc_c_ac.c:999: warning: large integer implicitly truncated to unsigned type Fix this up by explicitly recasting the right-hand branch constant into a "u8" once more. Signed-off-by: David S. Miller --- net/llc/llc_c_ac.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c index 91fb6bc1b116..8169f24ed33e 100644 --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -995,8 +995,8 @@ static int llc_conn_ac_inc_npta_value(struct sock *sk, struct sk_buff *skb) llc->dec_step = 0; llc->dec_cntr = llc->inc_cntr = 2; ++llc->npta; - if (llc->npta > ~LLC_2_SEQ_NBR_MODULO) - llc->npta = ~LLC_2_SEQ_NBR_MODULO ; + if (llc->npta > (u8) ~LLC_2_SEQ_NBR_MODULO) + llc->npta = (u8) ~LLC_2_SEQ_NBR_MODULO; } else --llc->inc_cntr; return 0; @@ -1086,8 +1086,8 @@ int llc_conn_ac_inc_tx_win_size(struct sock *sk, struct sk_buff *skb) struct llc_sock *llc = llc_sk(sk); llc->k += 1; - if (llc->k > ~LLC_2_SEQ_NBR_MODULO) - llc->k = ~LLC_2_SEQ_NBR_MODULO ; + if (llc->k > (u8) ~LLC_2_SEQ_NBR_MODULO) + llc->k = (u8) ~LLC_2_SEQ_NBR_MODULO; return 0; } From 05b8b0fafd4cac75d205ecd5ad40992e2cc5934d Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Thu, 17 Nov 2005 15:22:39 -0800 Subject: [PATCH 140/169] [NET]: Sanitize NET_SCHED protection in /net/sched/Kconfig MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On Thu, 17 Nov 2005, David Gómez wrote: > I found out that if i select NET_CLS_ROUTE4, save my changes and exit > menuconfig, execute again make menuconfig and go to QoS options, then the new > available options are visible. So menuconfig has some problem refreshing > contents :? No, they were there before too, but you have to go up one level to see them. It's better in 2.6.15-rc1-git5, but the menu structure is still a little messed up, the patch below properly indents all menu entries. Signed-off-by: Roman Zippel Signed-off-by: David S. Miller --- net/sched/Kconfig | 37 ++++++++----------------------------- 1 file changed, 8 insertions(+), 29 deletions(-) diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 7f34e7fd767c..55cd5327fbd7 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -40,9 +40,10 @@ config NET_SCHED The available schedulers are listed in the following questions; you can say Y to as many as you like. If unsure, say N now. +if NET_SCHED + choice prompt "Packet scheduler clock source" - depends on NET_SCHED default NET_SCH_CLK_JIFFIES ---help--- Packet schedulers need a monotonic clock that increments at a static @@ -98,11 +99,9 @@ config NET_SCH_CLK_CPU endchoice comment "Queueing/Scheduling" - depends on NET_SCHED config NET_SCH_CBQ tristate "Class Based Queueing (CBQ)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Class-Based Queueing (CBQ) packet scheduling algorithm. This algorithm classifies the waiting packets @@ -120,7 +119,6 @@ config NET_SCH_CBQ config NET_SCH_HTB tristate "Hierarchical Token Bucket (HTB)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Hierarchical Token Buckets (HTB) packet scheduling algorithm. See @@ -135,7 +133,6 @@ config NET_SCH_HTB config NET_SCH_HFSC tristate "Hierarchical Fair Service Curve (HFSC)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Hierarchical Fair Service Curve (HFSC) packet scheduling algorithm. @@ -145,7 +142,7 @@ config NET_SCH_HFSC config NET_SCH_ATM tristate "ATM Virtual Circuits (ATM)" - depends on NET_SCHED && ATM + depends on ATM ---help--- Say Y here if you want to use the ATM pseudo-scheduler. This provides a framework for invoking classifiers, which in turn @@ -159,7 +156,6 @@ config NET_SCH_ATM config NET_SCH_PRIO tristate "Multi Band Priority Queueing (PRIO)" - depends on NET_SCHED ---help--- Say Y here if you want to use an n-band priority queue packet scheduler. @@ -169,7 +165,6 @@ config NET_SCH_PRIO config NET_SCH_RED tristate "Random Early Detection (RED)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Random Early Detection (RED) packet scheduling algorithm. @@ -181,7 +176,6 @@ config NET_SCH_RED config NET_SCH_SFQ tristate "Stochastic Fairness Queueing (SFQ)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Stochastic Fairness Queueing (SFQ) packet scheduling algorithm . @@ -193,7 +187,6 @@ config NET_SCH_SFQ config NET_SCH_TEQL tristate "True Link Equalizer (TEQL)" - depends on NET_SCHED ---help--- Say Y here if you want to use the True Link Equalizer (TLE) packet scheduling algorithm. This queueing discipline allows the combination @@ -206,7 +199,6 @@ config NET_SCH_TEQL config NET_SCH_TBF tristate "Token Bucket Filter (TBF)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Token Bucket Filter (TBF) packet scheduling algorithm. @@ -218,7 +210,6 @@ config NET_SCH_TBF config NET_SCH_GRED tristate "Generic Random Early Detection (GRED)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Generic Random Early Detection (GRED) packet scheduling algorithm for some of your network devices @@ -230,7 +221,6 @@ config NET_SCH_GRED config NET_SCH_DSMARK tristate "Differentiated Services marker (DSMARK)" - depends on NET_SCHED ---help--- Say Y if you want to schedule packets according to the Differentiated Services architecture proposed in RFC 2475. @@ -242,7 +232,6 @@ config NET_SCH_DSMARK config NET_SCH_NETEM tristate "Network emulator (NETEM)" - depends on NET_SCHED ---help--- Say Y if you want to emulate network delay, loss, and packet re-ordering. This is often useful to simulate networks when @@ -255,7 +244,6 @@ config NET_SCH_NETEM config NET_SCH_INGRESS tristate "Ingress Qdisc" - depends on NET_SCHED ---help--- Say Y here if you want to use classifiers for incoming packets. If unsure, say Y. @@ -264,14 +252,12 @@ config NET_SCH_INGRESS module will be called sch_ingress. comment "Classification" - depends on NET_SCHED config NET_CLS boolean config NET_CLS_BASIC tristate "Elementary classification (BASIC)" - depends NET_SCHED select NET_CLS ---help--- Say Y here if you want to be able to classify packets using @@ -282,7 +268,6 @@ config NET_CLS_BASIC config NET_CLS_TCINDEX tristate "Traffic-Control Index (TCINDEX)" - depends NET_SCHED select NET_CLS ---help--- Say Y here if you want to be able to classify packets based on @@ -294,7 +279,6 @@ config NET_CLS_TCINDEX config NET_CLS_ROUTE4 tristate "Routing decision (ROUTE)" - depends NET_SCHED select NET_CLS_ROUTE select NET_CLS ---help--- @@ -306,11 +290,9 @@ config NET_CLS_ROUTE4 config NET_CLS_ROUTE bool - default n config NET_CLS_FW tristate "Netfilter mark (FW)" - depends NET_SCHED select NET_CLS ---help--- If you say Y here, you will be able to classify packets @@ -321,7 +303,6 @@ config NET_CLS_FW config NET_CLS_U32 tristate "Universal 32bit comparisons w/ hashing (U32)" - depends NET_SCHED select NET_CLS ---help--- Say Y here to be able to classify packetes using a universal @@ -345,7 +326,6 @@ config CLS_U32_MARK config NET_CLS_RSVP tristate "IPv4 Resource Reservation Protocol (RSVP)" - depends on NET_SCHED select NET_CLS select NET_ESTIMATOR ---help--- @@ -361,7 +341,6 @@ config NET_CLS_RSVP config NET_CLS_RSVP6 tristate "IPv6 Resource Reservation Protocol (RSVP6)" - depends on NET_SCHED select NET_CLS select NET_ESTIMATOR ---help--- @@ -377,7 +356,6 @@ config NET_CLS_RSVP6 config NET_EMATCH bool "Extended Matches" - depends NET_SCHED select NET_CLS ---help--- Say Y here if you want to use extended matches on top of classifiers @@ -456,7 +434,7 @@ config NET_EMATCH_TEXT config NET_CLS_ACT bool "Actions" - depends on EXPERIMENTAL && NET_SCHED + depends on EXPERIMENTAL select NET_ESTIMATOR ---help--- Say Y here if you want to use traffic control actions. Actions @@ -539,7 +517,7 @@ config NET_ACT_SIMP config NET_CLS_POLICE bool "Traffic Policing (obsolete)" - depends on NET_SCHED && NET_CLS_ACT!=y + depends on NET_CLS_ACT!=y select NET_ESTIMATOR ---help--- Say Y here if you want to do traffic policing, i.e. strict @@ -549,7 +527,7 @@ config NET_CLS_POLICE config NET_CLS_IND bool "Incoming device classification" - depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW) + depends on NET_CLS_U32 || NET_CLS_FW ---help--- Say Y here to extend the u32 and fw classifier to support classification based on the incoming device. This option is @@ -557,11 +535,12 @@ config NET_CLS_IND config NET_ESTIMATOR bool "Rate estimator" - depends on NET_SCHED ---help--- Say Y here to allow using rate estimators to estimate the current rate-of-flow for network devices, queues, etc. This module is automaticaly selected if needed but can be selected manually for statstical purposes. +endif # NET_SCHED + endmenu From 9e147a1cfce5ec6308b024abe425d5b4e1884a03 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 17 Nov 2005 16:52:51 -0800 Subject: [PATCH 141/169] [IPV6]: Fib dump really needs GFP_ATOMIC. Revert: 8225ccbaf01b459cf1e462047a51b2851e756bc1 Based upon a report by Yan Zheng. Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 9a71a8d1078a..a7a537b50595 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1732,7 +1732,7 @@ int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb) /* * 2. allocate and initialize walker. */ - w = kmalloc(sizeof(*w), GFP_KERNEL); + w = kmalloc(sizeof(*w), GFP_ATOMIC); if (w == NULL) return -ENOMEM; RT6_TRACE("dump<%p", w); From 976164497d6d8050403c96894ad418de44ec748f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 17 Nov 2005 17:45:40 -0600 Subject: [PATCH 142/169] [PATCH] ppc: Fix warnings related to seq_file When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: Kumar Gala Signed-off-by: Linus Torvalds --- arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 2 ++ arch/ppc/platforms/85xx/stx_gp3.h | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 7b26bcc5d10d..198a6a02cde8 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -25,6 +25,8 @@ #define BCSR_ADDR ((uint)0xf8000000) #define BCSR_SIZE ((uint)(32 * 1024)) +struct seq_file; + extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m); extern void mpc85xx_ads_init_IRQ(void) __init; extern void mpc85xx_ads_map_io(void) __init; diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 7bcc6c35a417..2f25b5195152 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -21,7 +21,6 @@ #include #include -#include #include #define BOARD_CCSRBAR ((uint)0xe0000000) @@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init; extern void mpc85xx_restart(char *cmd); extern void mpc85xx_power_off(void); extern void mpc85xx_halt(void); -extern int mpc85xx_show_cpuinfo(struct seq_file *m); extern void mpc85xx_init_IRQ(void) __init; extern unsigned long mpc85xx_find_end_of_memory(void) __init; extern void mpc85xx_calibrate_decr(void) __init; From d2a33170972c5772826f7f6cc950ab69ba034667 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 17 Nov 2005 20:34:35 +1100 Subject: [PATCH 143/169] [PATCH] powerpc: Fix typo in topology.h The fix to topology.h (5cfccd7f132432dd4705444a44b51d12ef88a85f) seems to have a typeo, struct sched_domain has an idle_idx member but not an idle_id member. I assume this is the fix. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- include/asm-powerpc/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 0e8c20c96062..db8095cbe09b 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -42,7 +42,7 @@ static inline int node_to_first_cpu(int node) .cache_nice_tries = 1, \ .per_cpu_gain = 100, \ .busy_idx = 3, \ - .idle_id = 1, \ + .idle_idx = 1, \ .newidle_idx = 2, \ .wake_idx = 1, \ .flags = SD_LOAD_BALANCE \ From 68643cfb879ad8c327441f875b60981822016575 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 17 Nov 2005 22:09:02 +0100 Subject: [PATCH 144/169] [PATCH] ppc boot: replace string labels with numbers Replacing the string labels with numbers saves 117 bytes in the final zImage. These local labels are not discared. Signed-off-by: Olaf Hering arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 files changed, 11 insertions(+), 12 deletions(-) Signed-off-by: Paul Mackerras --- arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 9cc442263939..d2f2ace56cd3 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -14,43 +14,42 @@ .text .globl _zimage_start _zimage_start: - bl reloc_offset + bl 1f -reloc_offset: +1: mflr r0 - lis r9,reloc_offset@ha - addi r9,r9,reloc_offset@l + lis r9,1b@ha + addi r9,r9,1b@l subf. r0,r9,r0 - beq clear_caches + beq 3f -reloc_got2: lis r9,__got2_start@ha addi r9,r9,__got2_start@l lis r8,__got2_end@ha addi r8,r8,__got2_end@l subf. r8,r9,r8 - beq clear_caches + beq 3f srwi. r8,r8,2 mtctr r8 add r9,r0,r9 -reloc_got2_loop: +2: lwz r8,0(r9) add r8,r8,r0 stw r8,0(r9) addi r9,r9,4 - bdnz reloc_got2_loop + bdnz 2b -clear_caches: +3: lis r9,_start@h add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l add r8,r0,r8 -1: dcbf r0,r9 +4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 cmplwi 0,r9,8 - blt 1b + blt 4b sync isync From a097a35c9a6de6316c18a3e914c64400b5a6db57 Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Thu, 17 Nov 2005 22:22:14 +0100 Subject: [PATCH 145/169] [PATCH] powerpc: Maple: request I/O resource. Reserve the Maple RTC I/O resource. Needed now we use genrtc. Signed-off-by: Segher Boessenkool Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/maple/time.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 40fc07a8e606..15846cc938ac 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm) return 0; } +static struct resource rtc_iores = { + .name = "rtc", + .flags = IORESOURCE_BUSY, +}; + unsigned long __init maple_get_boot_time(void) { struct rtc_time tm; @@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void) printk(KERN_INFO "Maple: No device node for RTC, assuming " "legacy address (0x%x)\n", maple_rtc_addr); } - + + rtc_iores.start = maple_rtc_addr; + rtc_iores.end = maple_rtc_addr + 7; + request_resource(&ioport_resource, &rtc_iores); + maple_get_rtc_time(&tm); return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); From 6760a1bdf56de6e1a30399d9069b94bfea59c13d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 17 Nov 2005 17:05:02 -0600 Subject: [PATCH 146/169] [PATCH] ppc: Fix MPC83xx device table The SVRs for MPC8343/E were incorrect and really the SVRs for MPC8347/E. Signed-off-by: David Updegraff Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/ppc/syslib/mpc83xx_sys.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index a1523989aff4..82cf3ab77f4a 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = { }, }, { - .ppc_sys_name = "8343E", + .ppc_sys_name = "8347E", .mask = 0xFFFF0000, .value = 0x80540000, + .num_devices = 9, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8347", + .mask = 0xFFFF0000, + .value = 0x80550000, + .num_devices = 8, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8343E", + .mask = 0xFFFF0000, + .value = 0x80560000, .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { @@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { .ppc_sys_name = "8343", .mask = 0xFFFF0000, - .value = 0x80550000, + .value = 0x80570000, .num_devices = 7, .device_list = (enum ppc_sys_devices[]) { From fe7bce5ef70105a6546dc9b5c354219b9f6ea991 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 17 Nov 2005 17:45:40 -0600 Subject: [PATCH 147/169] [PATCH] ppc: Fix warnings related to seq_file When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 2 ++ arch/ppc/platforms/85xx/stx_gp3.h | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 7b26bcc5d10d..198a6a02cde8 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -25,6 +25,8 @@ #define BCSR_ADDR ((uint)0xf8000000) #define BCSR_SIZE ((uint)(32 * 1024)) +struct seq_file; + extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m); extern void mpc85xx_ads_init_IRQ(void) __init; extern void mpc85xx_ads_map_io(void) __init; diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 7bcc6c35a417..2f25b5195152 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -21,7 +21,6 @@ #include #include -#include #include #define BOARD_CCSRBAR ((uint)0xe0000000) @@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init; extern void mpc85xx_restart(char *cmd); extern void mpc85xx_power_off(void); extern void mpc85xx_halt(void); -extern int mpc85xx_show_cpuinfo(struct seq_file *m); extern void mpc85xx_init_IRQ(void) __init; extern unsigned long mpc85xx_find_end_of_memory(void) __init; extern void mpc85xx_calibrate_decr(void) __init; From 6defa38b3754c84cd3449447477aed81ea979407 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 13:44:17 +1100 Subject: [PATCH 148/169] powerpc: Fix delay functions for 601 processors My earlier merge of delay.h introduced a timebase-based udelay for 32-bit machines but also broke the 601, which doesn't have the timebase register. This fixes it by using the 601's RTC register on the 601, and also moves __delay() and udelay() to be out-of-line in arch/powerpc/kernel/time.c. These functions aren't really performance critical, after all. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/misc_32.S | 8 ------- arch/powerpc/kernel/time.c | 28 ++++++++++++++++++++++++ include/asm-powerpc/delay.h | 40 ++--------------------------------- 3 files changed, 30 insertions(+), 46 deletions(-) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f6d84a75ed26..624a983a9676 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -27,14 +27,6 @@ .text - .align 5 -_GLOBAL(__delay) - cmpwi 0,r3,0 - mtctr r3 - beqlr -1: bdnz 1b - blr - /* * This returns the high 64 bits of the product of two 64-bit numbers. */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 070b4b458aaf..de8479769bb7 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -130,6 +130,34 @@ unsigned long tb_last_stamp; */ DEFINE_PER_CPU(unsigned long, last_jiffy); +void __delay(unsigned long loops) +{ + unsigned long start; + int diff; + + if (__USE_RTC()) { + start = get_rtcl(); + do { + /* the RTCL register wraps at 1000000000 */ + diff = get_rtcl() - start; + if (diff < 0) + diff += 1000000000; + } while (diff < loops); + } else { + start = get_tbl(); + while (get_tbl() - start < loops) + HMT_low(); + HMT_medium(); + } +} +EXPORT_SYMBOL(__delay); + +void udelay(unsigned long usecs) +{ + __delay(tb_ticks_per_usec * usecs); +} +EXPORT_SYMBOL(udelay); + static __inline__ void timer_check_rtc(void) { /* diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h index 1492aa9ab716..54fe1f4f8fd0 100644 --- a/include/asm-powerpc/delay.h +++ b/include/asm-powerpc/delay.h @@ -13,43 +13,7 @@ * Anton Blanchard. */ -extern unsigned long tb_ticks_per_usec; - -#ifdef CONFIG_PPC64 -/* define these here to prevent circular dependencies */ -/* these instructions control the thread priority on multi-threaded cpus */ -#define __HMT_low() asm volatile("or 1,1,1") -#define __HMT_medium() asm volatile("or 2,2,2") -#else -#define __HMT_low() -#define __HMT_medium() -#endif - -#define __barrier() asm volatile("" ::: "memory") - -static inline unsigned long __get_tb(void) -{ - unsigned long rval; - - asm volatile("mftb %0" : "=r" (rval)); - return rval; -} - -static inline void __delay(unsigned long loops) -{ - unsigned long start = __get_tb(); - - while((__get_tb() - start) < loops) - __HMT_low(); - __HMT_medium(); - __barrier(); -} - -static inline void udelay(unsigned long usecs) -{ - unsigned long loops = tb_ticks_per_usec * usecs; - - __delay(loops); -} +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); #endif /* _ASM_POWERPC_DELAY_H */ From 5daf9071b527089b1bd5d9cb3a5354b83121550e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 18 Nov 2005 14:09:41 +1100 Subject: [PATCH 149/169] [PATCH] powerpc: merge align.c This patch merges align.c, the result isn't quite what was in ppc64 nor what was in ppc32 :) It should implement all the functionalities of both though. Kumar, since you played with that in the past, I suppose you have some test cases for verifying that it works properly before I dig out the 601 machine ? :) Since it's likely that I won't be able to test all scenario, code inspection is much welcome. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/{ppc64 => powerpc}/kernel/align.c | 394 ++++++++++++++++-------- arch/ppc/kernel/Makefile | 4 +- arch/ppc/kernel/align.c | 410 ------------------------- arch/ppc64/kernel/Makefile | 2 +- include/asm-powerpc/cputable.h | 22 +- 6 files changed, 280 insertions(+), 554 deletions(-) rename arch/{ppc64 => powerpc}/kernel/align.c (51%) delete mode 100644 arch/ppc/kernel/align.c diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 4970e3721a84..0e679afb2e20 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,7 +12,7 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - irq.o signal_32.o pmc.o vdso.o + irq.o align.o signal_32.o pmc.o vdso.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c similarity index 51% rename from arch/ppc64/kernel/align.c rename to arch/powerpc/kernel/align.c index 256d5b592aa1..faaec9c6f78f 100644 --- a/arch/ppc64/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -7,6 +7,9 @@ * PowerPC 403GCX/405GP modifications. * Copyright (c) 2001-2002 PPC64 team, IBM Corp * 64-bit and Power4 support + * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp + * + * Merge ppc32 and ppc64 implementations * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,10 +41,15 @@ struct aligninfo { #define F 8 /* to/from fp regs */ #define U 0x10 /* update index register */ #define M 0x20 /* multiple load/store */ -#define SW 0x40 /* byte swap */ +#define SW 0x40 /* byte swap int or ... */ +#define S 0x40 /* ... single-precision fp */ +#define SX 0x40 /* byte count in XER */ +#define HARD 0x80 /* string, stwcx. */ #define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ +#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) + /* * The PowerPC stores certain bits of the instruction that caused the * alignment exception in the DSISR register. This array maps those @@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 00 0 0101: lha */ { 2, ST }, /* 00 0 0110: sth */ { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F }, /* 00 0 1000: lfs */ + { 4, LD+F+S }, /* 00 0 1000: lfs */ { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F }, /* 00 0 1010: stfs */ + { 4, ST+F+S }, /* 00 0 1010: stfs */ { 8, ST+F }, /* 00 0 1011: stfd */ INVALID, /* 00 0 1100 */ - { 8, LD }, /* 00 0 1101: ld */ + { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ INVALID, /* 00 0 1110 */ - { 8, ST }, /* 00 0 1111: std */ + { 8, ST }, /* 00 0 1111: std/stdu */ { 4, LD+U }, /* 00 1 0000: lwzu */ INVALID, /* 00 1 0001 */ { 4, ST+U }, /* 00 1 0010: stwu */ @@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 00 1 0101: lhau */ { 2, ST+U }, /* 00 1 0110: sthu */ { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+U }, /* 00 1 1000: lfsu */ + { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+U }, /* 00 1 1010: stfsu */ + { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ { 8, ST+F+U }, /* 00 1 1011: stfdu */ INVALID, /* 00 1 1100 */ INVALID, /* 00 1 1101 */ @@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = { { 4, LD+SE }, /* 01 0 0101: lwax */ INVALID, /* 01 0 0110 */ INVALID, /* 01 0 0111 */ - { 0, LD }, /* 01 0 1000: lswx */ - { 0, LD }, /* 01 0 1001: lswi */ - { 0, ST }, /* 01 0 1010: stswx */ - { 0, ST }, /* 01 0 1011: stswi */ + { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ + { 4, LD+M+HARD }, /* 01 0 1001: lswi */ + { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ + { 4, ST+M+HARD }, /* 01 0 1011: stswi */ INVALID, /* 01 0 1100 */ { 8, LD+U }, /* 01 0 1101: ldu */ INVALID, /* 01 0 1110 */ @@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 01 1 1111 */ INVALID, /* 10 0 0000 */ INVALID, /* 10 0 0001 */ - { 0, ST }, /* 10 0 0010: stwcx. */ + INVALID, /* 10 0 0010: stwcx. */ INVALID, /* 10 0 0011 */ INVALID, /* 10 0 0100 */ INVALID, /* 10 0 0101 */ @@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 10 1 1100 */ INVALID, /* 10 1 1101 */ INVALID, /* 10 1 1110 */ - { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */ + { 0, ST+HARD }, /* 10 1 1111: dcbz */ { 4, LD }, /* 11 0 0000: lwzx */ INVALID, /* 11 0 0001 */ { 4, ST }, /* 11 0 0010: stwx */ @@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 11 0 0101: lhax */ { 2, ST }, /* 11 0 0110: sthx */ INVALID, /* 11 0 0111 */ - { 4, LD+F }, /* 11 0 1000: lfsx */ + { 4, LD+F+S }, /* 11 0 1000: lfsx */ { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F }, /* 11 0 1010: stfsx */ + { 4, ST+F+S }, /* 11 0 1010: stfsx */ { 8, ST+F }, /* 11 0 1011: stfdx */ INVALID, /* 11 0 1100 */ { 8, LD+M }, /* 11 0 1101: lmd */ @@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 11 1 0101: lhaux */ { 2, ST+U }, /* 11 1 0110: sthux */ INVALID, /* 11 1 0111 */ - { 4, LD+F+U }, /* 11 1 1000: lfsux */ + { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+U }, /* 11 1 1010: stfsux */ + { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ { 8, ST+F+U }, /* 11 1 1011: stfdux */ INVALID, /* 11 1 1100 */ INVALID, /* 11 1 1101 */ @@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 11 1 1111 */ }; -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - +/* + * Create a DSISR value from the instruction + */ static inline unsigned make_dsisr(unsigned instr) { unsigned dsisr; - - /* create a DSISR value from the instruction */ - dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */ - - if ( IS_XFORM(instr) ) { - dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */ - dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */ - dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */ + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; } - else { - dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */ - dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */ - if ( IS_DSFORM(instr) ) { - dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */ + + return dsisr; +} + +/* + * The dcbz (data cache block zero) instruction + * gives an alignment fault if used on non-cacheable + * memory. We handle the fault mainly for the + * case when we are running with the cache disabled + * for debugging. + */ +static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) +{ + long __user *p; + int i, size; + +#ifdef __powerpc64__ + size = ppc64_caches.dline_size; +#else + size = L1_CACHE_BYTES; +#endif + p = (long __user *) (regs->dar & -size); + if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) + return -EFAULT; + for (i = 0; i < size / sizeof(long); ++i) + if (__put_user(0, p+i)) + return -EFAULT; + return 1; +} + +/* + * Emulate load & store multiple instructions + * On 64-bit machines, these instructions only affect/use the + * bottom 4 bytes of each register, and the loads clear the + * top 4 bytes of the affected register. + */ +#ifdef CONFIG_PPC64 +#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) +#else +#define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) +#endif + +static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int nb, + unsigned int flags, unsigned int instr) +{ + unsigned long *rptr; + unsigned int nb0, i; + + /* + * We do not try to emulate 8 bytes multiple as they aren't really + * available in our operating environments and we don't try to + * emulate multiples operations in kernel land as they should never + * be used/generated there at least not on unaligned boundaries + */ + if (unlikely((nb > 4) || !user_mode(regs))) + return 0; + + /* lmw, stmw, lswi/x, stswi/x */ + nb0 = 0; + if (flags & HARD) { + if (flags & SX) { + nb = regs->xer & 127; + if (nb == 0) + return 1; + } else { + if (__get_user(instr, + (unsigned int __user *)regs->nip)) + return -EFAULT; + nb = (instr >> 11) & 0x1f; + if (nb == 0) + nb = 32; } + if (nb + reg * 4 > 128) { + nb0 = nb + reg * 4 - 128; + nb = 128 - reg * 4; + } + } else { + /* lwm, stmw */ + nb = (32 - reg) * 4; } - - return dsisr; + + if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) + return -EFAULT; /* bad address */ + + rptr = ®s->gpr[reg]; + if (flags & LD) { + /* + * This zeroes the top 4 bytes of the affected registers + * in 64-bit mode, and also zeroes out any remaining + * bytes of the last register for lsw*. + */ + memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); + if (nb0 > 0) + memset(®s->gpr[0], 0, + ((nb0 + 3) / 4) * sizeof(unsigned long)); + + for (i = 0; i < nb; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + + } else { + for (i = 0; i < nb; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + } + return 1; } -int -fix_alignment(struct pt_regs *regs) + +/* + * Called on alignment exception. Attempts to fixup + * + * Return 1 on success + * Return 0 if unable to handle the interrupt + * Return -EFAULT if data address is bad + */ + +int fix_alignment(struct pt_regs *regs) { unsigned int instr, nb, flags; - int t; - unsigned long reg, areg; - unsigned long i; - int ret; - unsigned dsisr; + unsigned int reg, areg; + unsigned int dsisr; unsigned char __user *addr; unsigned char __user *p; - unsigned long __user *lp; + int ret, t; union { - long ll; + u64 ll; double dd; unsigned char v[8]; struct { @@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs) } data; /* - * Return 1 on success - * Return 0 if unable to handle the interrupt - * Return -EFAULT if data address is bad + * We require a complete register set, if not, then our assembly + * is broken */ + CHECK_FULL_REGS(regs); dsisr = regs->dsisr; + /* Some processors don't provide us with a DSISR we can use here, + * let's make one up from the instruction + */ if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { - unsigned int real_instr; - if (__get_user(real_instr, (unsigned int __user *)regs->nip)) - return 0; - dsisr = make_dsisr(real_instr); + unsigned int real_instr; + if (unlikely(__get_user(real_instr, + (unsigned int __user *)regs->nip))) + return -EFAULT; + dsisr = make_dsisr(real_instr); } /* extract the operation and registers from the dsisr */ @@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs) /* DAR has the operand effective address */ addr = (unsigned char __user *)regs->dar; - /* A size of 0 indicates an instruction we don't support */ - /* we also don't support the multiples (lmw, stmw, lmd, stmd) */ - if ((nb == 0) || (flags & M)) - return 0; /* too hard or invalid instruction */ - - /* - * Special handling for dcbz - * dcbz may give an alignment exception for accesses to caching inhibited - * storage + /* A size of 0 indicates an instruction we don't support, with + * the exception of DCBZ which is handled as a special case here */ if (instr == DCBZ) - addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES); + return emulate_dcbz(regs, addr); + if (unlikely(nb == 0)) + return 0; + + /* Load/Store Multiple instructions are handled in their own + * function + */ + if (flags & M) + return emulate_multiple(regs, addr, reg, nb, flags, instr); /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } + if (unlikely(user_mode(regs) && + !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), + addr, nb))) + return -EFAULT; /* Force the fprs into the save area so we can reference them */ if (flags & F) { - if (!user_mode(regs)) + /* userland only */ + if (unlikely(!user_mode(regs))) return 0; flush_fp_to_thread(current); } - - /* If we are loading, get the data from user space */ + + /* If we are loading, get the data from user space, else + * get it from register values + */ if (flags & LD) { data.ll = 0; ret = 0; @@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs) case 2: ret |= __get_user(data.v[6], p++); ret |= __get_user(data.v[7], p++); - if (ret) + if (unlikely(ret)) return -EFAULT; } - } - - /* If we are storing, get the data from the saved gpr or fpr */ - if (flags & ST) { - if (flags & F) { - if (nb == 4) { - /* Doing stfs, have to convert to single */ - preempt_disable(); - enable_kernel_fp(); - cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - data.dd = current->thread.fpr[reg]; - } - else - data.ll = regs->gpr[reg]; - } - - /* Swap bytes as needed */ - if (flags & SW) { - if (nb == 2) - SWAP(data.v[6], data.v[7]); - else { /* nb must be 4 */ - SWAP(data.v[4], data.v[7]); - SWAP(data.v[5], data.v[6]); - } - } - - /* Sign extend as needed */ - if (flags & SE) { + } else if (flags & F) + data.dd = current->thread.fpr[reg]; + else + data.ll = regs->gpr[reg]; + + /* Perform other misc operations like sign extension, byteswap, + * or floating point single precision conversion + */ + switch (flags & ~U) { + case LD+SE: /* sign extend */ if ( nb == 2 ) data.ll = data.x16.low16; else /* nb must be 4 */ data.ll = data.x32.low32; - } - - /* If we are loading, move the data to the gpr or fpr */ - if (flags & LD) { - if (flags & F) { - if (nb == 4) { - /* Doing lfs, have to convert to double */ - preempt_disable(); - enable_kernel_fp(); - cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - current->thread.fpr[reg] = data.dd; + break; + case LD+S: /* byte-swap */ + case ST+S: + if (nb == 2) { + SWAP(data.v[6], data.v[7]); + } else { + SWAP(data.v[4], data.v[7]); + SWAP(data.v[5], data.v[6]); } - else - regs->gpr[reg] = data.ll; + break; + + /* Single-precision FP load and store require conversions... */ + case LD+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + case ST+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; } - - /* If we are storing, copy the data to the user */ + + /* Store result to memory or update registers */ if (flags & ST) { ret = 0; p = addr; switch (nb) { - case 128: /* Special case - must be dcbz */ - lp = (unsigned long __user *)p; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - ret |= __put_user(0, lp++); - break; case 8: ret |= __put_user(data.v[0], p++); ret |= __put_user(data.v[1], p++); @@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs) ret |= __put_user(data.v[6], p++); ret |= __put_user(data.v[7], p++); } - if (ret) + if (unlikely(ret)) return -EFAULT; - } - + } else if (flags & F) + current->thread.fpr[reg] = data.dd; + else + regs->gpr[reg] = data.ll; + /* Update RA as needed */ - if (flags & U) { + if (flags & U) regs->gpr[areg] = regs->dar; - } return 1; } - diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 17a4da65e275..0bb23fce4293 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds obj-y := entry.o traps.o idle.o time.o misc.o \ - process.o align.o \ + process.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -38,7 +38,7 @@ endif # These are here while we do the architecture merge else -obj-y := idle.o align.o +obj-y := idle.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c deleted file mode 100644 index ab398c4b70b6..000000000000 --- a/arch/ppc/kernel/align.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * align.c - handle alignment exceptions for the Power PC. - * - * Copyright (c) 1996 Paul Mackerras - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson - * PowerPC 403GCX/405GP modifications. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -struct aligninfo { - unsigned char len; - unsigned char flags; -}; - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) -#define OPCD(inst) (((inst) & 0xFC000000) >> 26) -#define RS(inst) (((inst) & 0x03E00000) >> 21) -#define RA(inst) (((inst) & 0x001F0000) >> 16) -#define IS_XFORM(code) ((code) == 31) -#endif - -#define INVALID { 0, 0 } - -#define LD 1 /* load */ -#define ST 2 /* store */ -#define SE 4 /* sign-extend value */ -#define F 8 /* to/from fp regs */ -#define U 0x10 /* update index register */ -#define M 0x20 /* multiple load/store */ -#define S 0x40 /* single-precision fp, or byte-swap value */ -#define SX 0x40 /* byte count in XER */ -#define HARD 0x80 /* string, stwcx. */ - -#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ - -/* - * The PowerPC stores certain bits of the instruction that caused the - * alignment exception in the DSISR register. This array maps those - * bits to information about the operand length and what the - * instruction would do. - */ -static struct aligninfo aligninfo[128] = { - { 4, LD }, /* 00 0 0000: lwz / lwarx */ - INVALID, /* 00 0 0001 */ - { 4, ST }, /* 00 0 0010: stw */ - INVALID, /* 00 0 0011 */ - { 2, LD }, /* 00 0 0100: lhz */ - { 2, LD+SE }, /* 00 0 0101: lha */ - { 2, ST }, /* 00 0 0110: sth */ - { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F+S }, /* 00 0 1000: lfs */ - { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F+S }, /* 00 0 1010: stfs */ - { 8, ST+F }, /* 00 0 1011: stfd */ - INVALID, /* 00 0 1100 */ - INVALID, /* 00 0 1101: ld/ldu/lwa */ - INVALID, /* 00 0 1110 */ - INVALID, /* 00 0 1111: std/stdu */ - { 4, LD+U }, /* 00 1 0000: lwzu */ - INVALID, /* 00 1 0001 */ - { 4, ST+U }, /* 00 1 0010: stwu */ - INVALID, /* 00 1 0011 */ - { 2, LD+U }, /* 00 1 0100: lhzu */ - { 2, LD+SE+U }, /* 00 1 0101: lhau */ - { 2, ST+U }, /* 00 1 0110: sthu */ - { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ - { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ - { 8, ST+F+U }, /* 00 1 1011: stfdu */ - INVALID, /* 00 1 1100 */ - INVALID, /* 00 1 1101 */ - INVALID, /* 00 1 1110 */ - INVALID, /* 00 1 1111 */ - INVALID, /* 01 0 0000: ldx */ - INVALID, /* 01 0 0001 */ - INVALID, /* 01 0 0010: stdx */ - INVALID, /* 01 0 0011 */ - INVALID, /* 01 0 0100 */ - INVALID, /* 01 0 0101: lwax */ - INVALID, /* 01 0 0110 */ - INVALID, /* 01 0 0111 */ - { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ - { 4, LD+M+HARD }, /* 01 0 1001: lswi */ - { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ - { 4, ST+M+HARD }, /* 01 0 1011: stswi */ - INVALID, /* 01 0 1100 */ - INVALID, /* 01 0 1101 */ - INVALID, /* 01 0 1110 */ - INVALID, /* 01 0 1111 */ - INVALID, /* 01 1 0000: ldux */ - INVALID, /* 01 1 0001 */ - INVALID, /* 01 1 0010: stdux */ - INVALID, /* 01 1 0011 */ - INVALID, /* 01 1 0100 */ - INVALID, /* 01 1 0101: lwaux */ - INVALID, /* 01 1 0110 */ - INVALID, /* 01 1 0111 */ - INVALID, /* 01 1 1000 */ - INVALID, /* 01 1 1001 */ - INVALID, /* 01 1 1010 */ - INVALID, /* 01 1 1011 */ - INVALID, /* 01 1 1100 */ - INVALID, /* 01 1 1101 */ - INVALID, /* 01 1 1110 */ - INVALID, /* 01 1 1111 */ - INVALID, /* 10 0 0000 */ - INVALID, /* 10 0 0001 */ - { 0, ST+HARD }, /* 10 0 0010: stwcx. */ - INVALID, /* 10 0 0011 */ - INVALID, /* 10 0 0100 */ - INVALID, /* 10 0 0101 */ - INVALID, /* 10 0 0110 */ - INVALID, /* 10 0 0111 */ - { 4, LD+S }, /* 10 0 1000: lwbrx */ - INVALID, /* 10 0 1001 */ - { 4, ST+S }, /* 10 0 1010: stwbrx */ - INVALID, /* 10 0 1011 */ - { 2, LD+S }, /* 10 0 1100: lhbrx */ - INVALID, /* 10 0 1101 */ - { 2, ST+S }, /* 10 0 1110: sthbrx */ - INVALID, /* 10 0 1111 */ - INVALID, /* 10 1 0000 */ - INVALID, /* 10 1 0001 */ - INVALID, /* 10 1 0010 */ - INVALID, /* 10 1 0011 */ - INVALID, /* 10 1 0100 */ - INVALID, /* 10 1 0101 */ - INVALID, /* 10 1 0110 */ - INVALID, /* 10 1 0111 */ - INVALID, /* 10 1 1000 */ - INVALID, /* 10 1 1001 */ - INVALID, /* 10 1 1010 */ - INVALID, /* 10 1 1011 */ - INVALID, /* 10 1 1100 */ - INVALID, /* 10 1 1101 */ - INVALID, /* 10 1 1110 */ - { 0, ST+HARD }, /* 10 1 1111: dcbz */ - { 4, LD }, /* 11 0 0000: lwzx */ - INVALID, /* 11 0 0001 */ - { 4, ST }, /* 11 0 0010: stwx */ - INVALID, /* 11 0 0011 */ - { 2, LD }, /* 11 0 0100: lhzx */ - { 2, LD+SE }, /* 11 0 0101: lhax */ - { 2, ST }, /* 11 0 0110: sthx */ - INVALID, /* 11 0 0111 */ - { 4, LD+F+S }, /* 11 0 1000: lfsx */ - { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F+S }, /* 11 0 1010: stfsx */ - { 8, ST+F }, /* 11 0 1011: stfdx */ - INVALID, /* 11 0 1100 */ - INVALID, /* 11 0 1101: lmd */ - INVALID, /* 11 0 1110 */ - INVALID, /* 11 0 1111: stmd */ - { 4, LD+U }, /* 11 1 0000: lwzux */ - INVALID, /* 11 1 0001 */ - { 4, ST+U }, /* 11 1 0010: stwux */ - INVALID, /* 11 1 0011 */ - { 2, LD+U }, /* 11 1 0100: lhzux */ - { 2, LD+SE+U }, /* 11 1 0101: lhaux */ - { 2, ST+U }, /* 11 1 0110: sthux */ - INVALID, /* 11 1 0111 */ - { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ - { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ - { 8, ST+F+U }, /* 11 1 1011: stfdux */ - INVALID, /* 11 1 1100 */ - INVALID, /* 11 1 1101 */ - INVALID, /* 11 1 1110 */ - INVALID, /* 11 1 1111 */ -}; - -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - -int -fix_alignment(struct pt_regs *regs) -{ - int instr, nb, flags; -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - int opcode, f1, f2, f3; -#endif - int i, t; - int reg, areg; - int offset, nb0; - unsigned char __user *addr; - unsigned char *rptr; - union { - long l; - float f; - double d; - unsigned char v[8]; - } data; - - CHECK_FULL_REGS(regs); - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - /* The 4xx-family & Book-E processors have no DSISR register, - * so we emulate it. - * The POWER4 has a DSISR register but doesn't set it on - * an alignment fault. -- paulus - */ - - if (__get_user(instr, (unsigned int __user *) regs->nip)) - return 0; - opcode = OPCD(instr); - reg = RS(instr); - areg = RA(instr); - - if (!IS_XFORM(opcode)) { - f1 = 0; - f2 = (instr & 0x04000000) >> 26; - f3 = (instr & 0x78000000) >> 27; - } else { - f1 = (instr & 0x00000006) >> 1; - f2 = (instr & 0x00000040) >> 6; - f3 = (instr & 0x00000780) >> 7; - } - - instr = ((f1 << 5) | (f2 << 4) | f3); -#else - reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */ - areg = regs->dsisr & 0x1f; /* register to update */ - instr = (regs->dsisr >> 10) & 0x7f; -#endif - - nb = aligninfo[instr].len; - if (nb == 0) { - long __user *p; - int i; - - if (instr != DCBZ) - return 0; /* too hard or invalid instruction */ - /* - * The dcbz (data cache block zero) instruction - * gives an alignment fault if used on non-cacheable - * memory. We handle the fault mainly for the - * case when we are running with the cache disabled - * for debugging. - */ - p = (long __user *) (regs->dar & -L1_CACHE_BYTES); - if (user_mode(regs) - && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES)) - return -EFAULT; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - if (__put_user(0, p+i)) - return -EFAULT; - return 1; - } - - flags = aligninfo[instr].flags; - if ((flags & (LD|ST)) == 0) - return 0; - - /* For the 4xx-family & Book-E processors, the 'dar' field of the - * pt_regs structure is overloaded and is really from the DEAR. - */ - - addr = (unsigned char __user *)regs->dar; - - if (flags & M) { - /* lmw, stmw, lswi/x, stswi/x */ - nb0 = 0; - if (flags & HARD) { - if (flags & SX) { - nb = regs->xer & 127; - if (nb == 0) - return 1; - } else { - if (__get_user(instr, - (unsigned int __user *)regs->nip)) - return 0; - nb = (instr >> 11) & 0x1f; - if (nb == 0) - nb = 32; - } - if (nb + reg * 4 > 128) { - nb0 = nb + reg * 4 - 128; - nb = 128 - reg * 4; - } - } else { - /* lwm, stmw */ - nb = (32 - reg) * 4; - } - - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) - return -EFAULT; /* bad address */ - - rptr = (unsigned char *) ®s->gpr[reg]; - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - } - for (; (i & 3) != 0; ++i) - rptr[i] = 0; - } else { - for (i = 0; i < nb; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - } - } - return 1; - } - - offset = 0; - if (nb < 4) { - /* read/write the least significant bits */ - data.l = 0; - offset = 4 - nb; - } - - /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } - - if (flags & F) { - preempt_disable(); - if (regs->msr & MSR_FP) - giveup_fpu(current); - preempt_enable(); - } - - /* If we read the operand, copy it in, else get register values */ - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - data.d = current->thread.fpr[reg]; - } else { - data.l = regs->gpr[reg]; - } - - switch (flags & ~U) { - case LD+SE: /* sign extend */ - if (data.v[2] >= 0x80) - data.v[0] = data.v[1] = -1; - break; - - case LD+S: /* byte-swap */ - case ST+S: - if (nb == 2) { - SWAP(data.v[2], data.v[3]); - } else { - SWAP(data.v[0], data.v[3]); - SWAP(data.v[1], data.v[2]); - } - break; - - /* Single-precision FP load and store require conversions... */ - case LD+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_fd(&data.f, &data.d, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - case ST+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_df(&data.d, &data.f, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - } - - if (flags & ST) { - for (i = 0; i < nb; ++i) - if (__put_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - current->thread.fpr[reg] = data.d; - } else { - regs->gpr[reg] = data.l; - } - - if (flags & U) - regs->gpr[areg] = regs->dar; - - return 1; -} diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index e876c213f5ce..5f0abdb66e0b 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -2,6 +2,6 @@ # Makefile for the linux ppc64 kernel. # -obj-y += idle.o align.o +obj-y += idle.o obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 04e2726002cf..d1cfa3f515ea 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -90,6 +90,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) #define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) #define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) #ifdef __powerpc64__ /* Add the 64b processor unique features in the top half of the word */ @@ -97,7 +98,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000) #define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000001000000000) #define CPU_FTR_IABR ASM_CONST(0x0000002000000000) #define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000) #define CPU_FTR_CTRL ASM_CONST(0x0000008000000000) @@ -113,7 +113,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0) #define CPU_FTR_TLBIEL ASM_CONST(0x0) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0) #define CPU_FTR_IABR ASM_CONST(0x0) #define CPU_FTR_MMCRA ASM_CONST(0x0) #define CPU_FTR_CTRL ASM_CONST(0x0) @@ -273,18 +272,21 @@ enum { CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN, CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_MAYBE_CAN_NAP, + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN, CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_E200 = CPU_FTR_USE_TB, - CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, + CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN, + CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | - CPU_FTR_BIG_PHYS, - CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON, + CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN, + CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN, #ifdef __powerpc64__ CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR, From f62859bb6871c5e4a8e591c60befc8caaf54db8c Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Mon, 14 Nov 2005 16:12:49 -0800 Subject: [PATCH 150/169] [PATCH] Remove SPAN_OTHER_NODES config definition The config option SPAN_OTHER_NODES was created so that we could make pSeries numa layouts work within the DISCONTIG memory model. Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate this option. I'll be sending a separate patch to Andrew to remove the arch independent code as pSeries was the only arch that needed this. Signed-off-by: Mike Kravetz Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 13 ------------- arch/powerpc/configs/pseries_defconfig | 1 - 2 files changed, 14 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 94df74bcc0ee..bb2efdd566a9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place - -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - config PPC_64K_PAGES bool "64k page size" depends on PPC64 diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index b4745c918a4a..b589b196eb3f 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y From 437a58db57c61385baaa1cb8b7fa590b6a2f1607 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:43:34 +1100 Subject: [PATCH 151/169] powerpc: Move remaining .c files from arch/ppc64 to arch/powerpc This also deletes the now-unused Makefiles under arch/ppc64. Both of the files moved over could use some merging, but for now I have moved them as-is and arranged for them to be used only in 64-bit kernels. For 32-bit kernels we still use arch/ppc/kernel/idle.c and drivers/char/generic_nvram.c as before. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 4 +- arch/powerpc/kernel/Makefile | 5 +- .../idle.c => powerpc/kernel/idle_64.c} | 0 .../nvram.c => powerpc/kernel/nvram_64.c} | 0 arch/ppc64/Makefile | 142 ------------------ arch/ppc64/kernel/Makefile | 7 - 6 files changed, 6 insertions(+), 152 deletions(-) rename arch/{ppc64/kernel/idle.c => powerpc/kernel/idle_64.c} (100%) rename arch/{ppc64/kernel/nvram.c => powerpc/kernel/nvram_64.c} (100%) delete mode 100644 arch/ppc64/Makefile delete mode 100644 arch/ppc64/kernel/Makefile diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 99dbea8c5c50..987036b60c88 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -125,11 +125,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/powerpc/kernel/ \ - arch/$(OLDARCH)/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ +core-$(CONFIG_PPC32) += arch/ppc/kernel/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ @@ -165,7 +165,7 @@ define archhelp @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @echo ' install to $$(INSTALL_PATH) and run lilo' - @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs' + @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs' endef archclean: diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 0e679afb2e20..9ed551b6c172 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -17,7 +17,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o + firmware.o sysfs.o udbg.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o udbgscc-$(CONFIG_PPC64) := udbg_scc.o obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) +obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC64) += $(obj64-y) + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c similarity index 100% rename from arch/ppc64/kernel/idle.c rename to arch/powerpc/kernel/idle_64.c diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c similarity index 100% rename from arch/ppc64/kernel/nvram.c rename to arch/powerpc/kernel/nvram_64.c diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile deleted file mode 100644 index a55a82d145d4..000000000000 --- a/arch/ppc64/Makefile +++ /dev/null @@ -1,142 +0,0 @@ -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# Changes for PPC by Gary Thomas -# Rewritten by Cort Dougan and Paul Mackerras -# Adjusted for PPC64 by Tom Gall -# - -KERNELLOAD := 0xc000000000000000 - -# Set default 32 bits cross compilers for vdso and boot wrapper -CROSS32_COMPILE ?= - -CROSS32CC := $(CROSS32_COMPILE)gcc -CROSS32AS := $(CROSS32_COMPILE)as -CROSS32LD := $(CROSS32_COMPILE)ld -CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy - -# If we have a biarch compiler, use it for 32 bits cross compile if -# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit -# target type to target compilers - -HAS_BIARCH := $(call cc-option-yn, -m64) -ifeq ($(HAS_BIARCH),y) -ifeq ($(CROSS32_COMPILE),) -CROSS32CC := $(CC) -m32 -CROSS32AS := $(AS) -a32 -CROSS32LD := $(LD) -m elf32ppc -CROSS32OBJCOPY := $(OBJCOPY) -endif -override AS += -a64 -override LD += -m elf64ppc -override CC += -m64 -endif - -export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY - -new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) - -ifeq ($(new_nm),y) -NM := $(NM) --synthetic - -endif - -CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__ - -LDFLAGS := -m elf64ppc -LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD) -CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \ - -mcall-aixdesc -# Temporary hack until we have migrated to asm-powerpc -CPPFLAGS += -Iarch/$(ARCH)/include - -GCC_VERSION := $(call cc-version) -GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;) - -ifeq ($(CONFIG_POWER4_ONLY),y) -ifeq ($(CONFIG_ALTIVEC),y) -ifeq ($(GCC_BROKEN_VEC),y) - CFLAGS += $(call cc-option,-mcpu=970) -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mtune=power4) -endif - -# No AltiVec instruction when building kernel -CFLAGS += $(call cc-option, -mno-altivec) - -# Enable unit-at-a-time mode when possible. It shrinks the -# kernel considerably. -CFLAGS += $(call cc-option,-funit-at-a-time) - -head-y := arch/ppc64/kernel/head.o -head-y += arch/powerpc/kernel/fpu.o -head-y += arch/powerpc/kernel/entry_64.o - -core-y += arch/ppc64/kernel/ arch/powerpc/kernel/ -core-y += arch/powerpc/mm/ -core-y += arch/powerpc/sysdev/ -core-y += arch/powerpc/platforms/ -core-y += arch/powerpc/lib/ -core-$(CONFIG_XMON) += arch/powerpc/xmon/ -drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ - -boot := arch/ppc64/boot - -boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode -boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm -boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd -$(boottargets-y): vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage -bootimage-$(CONFIG_PPC_PMAC) := vmlinux -bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage -bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage -bootimage-$(CONFIG_PPC_ISERIES) := vmlinux -BOOTIMAGE := $(bootimage-y) -install: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ - -defaultimage-$(CONFIG_PPC_PSERIES) := zImage -defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode -defaultimage-$(CONFIG_PPC_MAPLE) := zImage -defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux -KBUILD_IMAGE := $(defaultimage-y) -all: $(KBUILD_IMAGE) - -archclean: - $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc - $(Q)rm -rf arch/$(ARCH)/include - - -# Temporary hack until we have migrated to asm-powerpc -include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: - $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm - -define archhelp - echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)' - echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,' - echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' - echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)' - echo ' zImage - zImage for pSeries machines' - echo ' zImage.initrd - zImage with initrd for pSeries machines' -endef diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile deleted file mode 100644 index 5f0abdb66e0b..000000000000 --- a/arch/ppc64/kernel/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux ppc64 kernel. -# - -obj-y += idle.o - -obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o From 6146eed1e972a7de93ce2e36adc5812de81e879c Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:47:18 +1100 Subject: [PATCH 152/169] powerpc: Fix compile error on pSeries arising from delay.h changes pseries_dedicated_idle() was using __get_tb which used to be defined in asm/delay.h. Change it to use get_tb from asm/time.h, which is in fact exactly the same thing. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b9d9732b2e06..4a465f067ede 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void) lpaca->lppaca.idle = 1; if (!need_resched()) { - start_snooze = __get_tb() + + start_snooze = get_tb() + *smt_snooze_delay * tb_ticks_per_usec; while (!need_resched() && !cpu_is_offline(cpu)) { @@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void) HMT_very_low(); if (*smt_snooze_delay != 0 && - __get_tb() > start_snooze) { + get_tb() > start_snooze) { HMT_medium(); dedicated_idle_sleep(cpu); } From 49e16b7becd6320bde51aa238c11815708f836d9 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:52:38 +1100 Subject: [PATCH 153/169] powerpc: time-of-day fixes for 32-bit CHRP systems This makes 32-bit CHRP systems use the RTAS time-of-day routines if available. It fixes a bug in the RTAS time-of-day routines where they were storing a 64-bit timebase value in an unsigned long by making those variables u64. Also, the direct-access time-of-day routines had the wrong convention for the month and year in the struct rtc_time. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas-rtc.c | 6 +++--- arch/powerpc/platforms/chrp/setup.c | 11 ++++++++++- arch/powerpc/platforms/chrp/time.c | 3 +-- 3 files changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 7b948662704c..635d3b9a8811 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 4099ddab9205..dda5f2c72c25 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -257,6 +257,13 @@ void __init chrp_setup_arch(void) if (rtas_token("display-character") >= 0) ppc_md.progress = rtas_progress; + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + #ifdef CONFIG_BOOTX_TEXT if (ppc_md.progress == NULL && boot_text_mapped) ppc_md.progress = btext_progress; @@ -505,9 +512,11 @@ void __init chrp_init(void) ppc_md.halt = rtas_halt; ppc_md.time_init = chrp_time_init; + ppc_md.calibrate_decr = chrp_calibrate_decr; + + /* this may get overridden with rtas routines later... */ ppc_md.set_rtc_time = chrp_set_rtc_time; ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; #ifdef CONFIG_SMP smp_ops = &chrp_smp_ops; diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 9e53535ddb82..737ee5d9f0aa 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg) chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - tm.tm_year -= 1900; if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(tm.tm_sec); BIN_TO_BCD(tm.tm_min); @@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm) BCD_TO_BIN(mon); BCD_TO_BIN(year); } - if ((year += 1900) < 1970) + if (year < 70) year += 100; tm->tm_sec = sec; tm->tm_min = min; From 44aedfe7dedb1ba9f4f9d17f55dec5727f5ff82f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:54:12 +1100 Subject: [PATCH 154/169] powerpc: Fix a couple of compile warnings for 32-bit compiles Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/chrp/smp.c | 1 + arch/ppc/kernel/pci.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index bb2315997d45..b616053bc331 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -34,6 +34,7 @@ #include #include #include +#include static void __devinit smp_chrp_kick_cpu(int nr) { diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 48ed58f995c0..f7fae5f153b2 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i); static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static int reparent_resources(struct resource *parent, struct resource *res); -static void fixup_rev1_53c810(struct pci_dev* dev); static void fixup_cpc710_pci64(struct pci_dev* dev); #ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; From 8a5abdf80ecf3ad3fa052878778c7185c5911a53 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 16:39:08 +1100 Subject: [PATCH 155/169] powerpc: Move defconfig over and remove remaining arch/ppc64 files make defconfig will now use arch/powerpc/configs/ppc64_defconfig if running on a ppc64 system. I need to add an arch/powerpc/configs/ppc_defconfig sometime. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 5 +- .../configs/ppc64_defconfig} | 346 ++-- arch/ppc64/Kconfig.debug | 65 - arch/ppc64/configs/bpa_defconfig | 1024 ------------ arch/ppc64/configs/g5_defconfig | 1392 ----------------- arch/ppc64/configs/iSeries_defconfig | 998 ------------ arch/ppc64/configs/maple_defconfig | 1062 ------------- arch/ppc64/configs/pSeries_defconfig | 1371 ---------------- 8 files changed, 244 insertions(+), 6019 deletions(-) rename arch/{ppc64/defconfig => powerpc/configs/ppc64_defconfig} (86%) delete mode 100644 arch/ppc64/Kconfig.debug delete mode 100644 arch/ppc64/configs/bpa_defconfig delete mode 100644 arch/ppc64/configs/g5_defconfig delete mode 100644 arch/ppc64/configs/iSeries_defconfig delete mode 100644 arch/ppc64/configs/maple_defconfig delete mode 100644 arch/ppc64/configs/pSeries_defconfig diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 987036b60c88..98f67c78d1bd 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -33,6 +33,8 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +KBUILD_DEFCONFIG := $(shell uname -m)_defconfig + ifeq ($(CONFIG_PPC64),y) OLDARCH := ppc64 SZ := 64 @@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200 AFLAGS += $(cpu-as-y) CFLAGS += $(cpu-as-y) -# Default to the common case. -KBUILD_DEFCONFIG := common_defconfig - head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig similarity index 86% rename from arch/ppc64/defconfig rename to arch/powerpc/configs/ppc64_defconfig index e79fd60bc122..b5ba3bbd96fb 100644 --- a/arch/ppc64/defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:28:33 2005 +# Linux kernel version: 2.6.15-rc1 +# Fri Nov 18 16:23:24 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -41,7 +56,7 @@ CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -CONFIG_PPC_BPA=y CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y CONFIG_U3_DART=y +CONFIG_MPIC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -# CONFIG_POWER4_ONLY is not set +CONFIG_IBMVIO=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -# CONFIG_NUMA is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_HOTPLUG_CPU=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set @@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -301,6 +358,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y # # Parallel port support # -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set +# CONFIG_PARPORT is not set # # Plug and Play support @@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m # Block devices # CONFIG_BLK_DEV_FD=y -# CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y @@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y CONFIG_SCSI_IBMVSCSI=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 @@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y # # Network device support @@ -664,7 +714,6 @@ CONFIG_E100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -684,7 +733,6 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -714,7 +762,6 @@ CONFIG_IBMOL=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set @@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set CONFIG_HVC_CONSOLE=y CONFIG_HVCS=m @@ -834,6 +877,7 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y CONFIG_I2C_KEYWEST=y CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -945,7 +990,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -960,6 +1004,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y +# CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y # # USB port drivers # -# CONFIG_USB_USS720 is not set # # USB Serial Converter support @@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y # # Security options @@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug deleted file mode 100644 index b258c9314a1b..000000000000 --- a/arch/ppc64/Kconfig.debug +++ /dev/null @@ -1,65 +0,0 @@ -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config DEBUG_STACKOVERFLOW - bool "Check for stack overflows" - depends on DEBUG_KERNEL - help - This option will cause messages to be printed if free stack space - drops below a certain limit. - -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - -config DEBUGGER - bool "Enable debugger hooks" - depends on DEBUG_KERNEL - help - Include in-kernel hooks for kernel debuggers. Unless you are - intending to debug the kernel, say N here. - -config XMON - bool "Include xmon kernel debugger" - depends on DEBUGGER && !PPC_ISERIES - help - Include in-kernel hooks for the xmon kernel monitor/debugger. - Unless you are intending to debug the kernel, say N here. - Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise - nothing will appear on the screen (xmon writes directly to the - framebuffer memory). - The cmdline option 'xmon' or 'xmon=early' will drop into xmon very - early during boot. 'xmon=on' will just enable the xmon debugger hooks. - 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set. - -config XMON_DEFAULT - bool "Enable xmon by default" - depends on XMON - help - xmon is normally disabled unless booted with 'xmon=on'. - Use 'xmon=off' to disable xmon init during runtime. - -config IRQSTACKS - bool "Use separate kernel stacks when processing interrupts" - help - If you say Y here the kernel will use separate kernel stacks - for handling hard and soft interrupts. This can help avoid - overflowing the process kernel stacks. - -endmenu diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig deleted file mode 100644 index 67ffecbc05cb..000000000000 --- a/arch/ppc64/configs/bpa_defconfig +++ /dev/null @@ -1,1024 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -# CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=y -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=y -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=y -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=m -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_STALDRV is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_EFI_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUGGER=y -# CONFIG_XMON is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig deleted file mode 100644 index 6323065fbf2c..000000000000 --- a/arch/ppc64/configs/g5_defconfig +++ /dev/null @@ -1,1392 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:23 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -CONFIG_PPC_PMAC=y -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG_CPU is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y -# CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -CONFIG_IEEE1394_OUI_DB=y -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# -# CONFIG_IEEE1394_PCILYNX is not set -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -CONFIG_ADB_PMU=y -CONFIG_PMAC_SMU=y -CONFIG_THERM_PM72=y - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -CONFIG_SUNGEM=y -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -CONFIG_TIGON3=m -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_PMACZILOG is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_AGP_UNINORTH=m -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=y -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -# CONFIG_USB_STORAGE_ONETOUCH is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_HID_FF=y -CONFIG_HID_PID=y -CONFIG_LOGITECH_FF=y -CONFIG_THRUSTMASTER_FF=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_AX8817X is not set -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig deleted file mode 100644 index 62e92c7e9e27..000000000000 --- a/arch/ppc64/configs/iSeries_defconfig +++ /dev/null @@ -1,998 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -CONFIG_PPC_ISERIES=y -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=m -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_ISERIES_VETH=y -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=m -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# iSeries device drivers -# -CONFIG_VIOCONS=y -CONFIG_VIODASD=y -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m -CONFIG_VIOPATH=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig deleted file mode 100644 index 7b480f3d1406..000000000000 --- a/arch/ppc64/configs/maple_defconfig +++ /dev/null @@ -1,1062 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_IDE_TASK_IOCTL=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -CONFIG_I2C_AMD8111=y -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=y -# CONFIG_USB_SERIAL_CONSOLE is not set -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -CONFIG_USB_SERIAL_TI=m -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -CONFIG_DEBUG_SLAB=y -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -# CONFIG_IRQSTACKS is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig deleted file mode 100644 index 9f09dff9e11a..000000000000 --- a/arch/ppc64/configs/pSeries_defconfig +++ /dev/null @@ -1,1371 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_CPUSETS=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_HOTPLUG_CPU=y -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -CONFIG_HOTPLUG_PCI=m -# CONFIG_HOTPLUG_PCI_FAKE is not set -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set -CONFIG_HOTPLUG_PCI_RPA=m -CONFIG_HOTPLUG_PCI_RPA_DLPAR=m - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_NETLINK=y -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=y -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_IPR=y -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y -# CONFIG_TYPHOON is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_IBMVETH=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -CONFIG_TIGON3=y -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_IXGB=m -# CONFIG_IXGB_NAPI is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_PCSPKR=m -# CONFIG_INPUT_UINPUT is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set -CONFIG_HVC_CONSOLE=y -CONFIG_HVCS=m - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=1024 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -CONFIG_INFINIBAND=m -# CONFIG_INFINIBAND_USER_MAD is not set -# CONFIG_INFINIBAND_USER_ACCESS is not set -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m From f365cfd0d8b6d8fb3583d23d48f54efa88ee8563 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 16:41:49 +1100 Subject: [PATCH 156/169] offb: Fix compile error on ppc32 systems The code Ben H added needs for things like pci_dev, etc. Signed-off-by: Paul Mackerras --- drivers/video/offb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/offb.c b/drivers/video/offb.c index fe8ba364b3e8..00d87f5bb7be 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include From 2203d6ed448ff3b777ee6bb614a53e686b483e5b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 18 Nov 2005 07:29:51 -0800 Subject: [PATCH 157/169] Fix ACPI processor power block initialization Properly clear the memory, and set "pr->flags.power" only if a C2 or deeper state is valid (to make the code match both the comment and previous behaviour). This fixes a boot-time lockup reported by Maneesh Soni when using "maxcpus=1". Acked-by: Maneesh Soni Signed-off-by: Linus Torvalds --- drivers/acpi/processor_idle.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 573b6a97bb1f..70d8a6ec0920 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -514,8 +514,6 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr) static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt"); if (!pr) @@ -524,8 +522,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) if (!pr->pblk) return_VALUE(-ENODEV); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(pr->power.states, 0, sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -555,13 +552,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1"); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(&(pr->power.states[i]), 0, - sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -873,7 +866,8 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { if (pr->power.states[i].valid) { pr->power.count = i; - pr->flags.power = 1; + if (pr->power.states[i].type >= ACPI_STATE_C2) + pr->flags.power = 1; } } From 2463ade2cb78224302998ee3c7dc7d53da88d258 Mon Sep 17 00:00:00 2001 From: Andrey Volkov Date: Fri, 18 Nov 2005 01:10:48 -0800 Subject: [PATCH 158/169] [PATCH] Fix copy-paste bug in ohci-ppc-soc.c Fix copy-paste bug in ohci-ppc-soc.c(ohci_hcd_ppc_soc_drv_remove) Signed-off-by: Andrey Volkov Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/host/ohci-ppc-soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 18755766e406..2ec6a78bd65e 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -185,7 +185,7 @@ static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_ppc_soc_remove(hcd, pdev); return 0; From 996417d2c4eb583e94553e4ede58974e0da1c38e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 18 Nov 2005 01:10:50 -0800 Subject: [PATCH 159/169] [PATCH] add success/failure indication to RCU torture test One issue with the RCU torture test is that the current error flagging can be lost in dmesg. This patch adds a "SUCCESS"/"FAILURE" string to the line that flags the end of the test, where it can easily be seen with "dmesg | tail" at the end of the test. Also adds tests of architecture-specific memory barriers -- or, more likely, of the RCU torture test itself. Cc: Signed-off-by: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/rcutorture.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index eb6719c50b4e..88c28d476550 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -80,6 +80,7 @@ struct rcu_torture { struct rcu_head rtort_rcu; int rtort_pipe_count; struct list_head rtort_free; + int rtort_mbtest; }; static int fullstop = 0; /* stop generating callbacks at test end. */ @@ -96,6 +97,8 @@ static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1]; atomic_t n_rcu_torture_alloc; atomic_t n_rcu_torture_alloc_fail; atomic_t n_rcu_torture_free; +atomic_t n_rcu_torture_mberror; +atomic_t n_rcu_torture_error; /* * Allocate an element from the rcu_tortures pool. @@ -145,9 +148,10 @@ rcu_torture_cb(struct rcu_head *p) if (i > RCU_TORTURE_PIPE_LEN) i = RCU_TORTURE_PIPE_LEN; atomic_inc(&rcu_torture_wcount[i]); - if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) + if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) { + rp->rtort_mbtest = 0; rcu_torture_free(rp); - else + } else call_rcu(p, rcu_torture_cb); } @@ -206,6 +210,7 @@ rcu_torture_writer(void *arg) rp->rtort_pipe_count = 0; udelay(rcu_random(&rand) & 0x3ff); old_rp = rcu_torture_current; + rp->rtort_mbtest = 1; rcu_assign_pointer(rcu_torture_current, rp); smp_wmb(); if (old_rp != NULL) { @@ -252,6 +257,8 @@ rcu_torture_reader(void *arg) schedule_timeout_interruptible(HZ); continue; } + if (p->rtort_mbtest == 0) + atomic_inc(&n_rcu_torture_mberror); udelay(rcu_random(&rand) & 0x7f); preempt_disable(); pipe_count = p->rtort_pipe_count; @@ -300,16 +307,22 @@ rcu_torture_printk(char *page) } cnt += sprintf(&page[cnt], "rcutorture: "); cnt += sprintf(&page[cnt], - "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d", + "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d " + "rtmbe: %d", rcu_torture_current, rcu_torture_current_version, list_empty(&rcu_torture_freelist), atomic_read(&n_rcu_torture_alloc), atomic_read(&n_rcu_torture_alloc_fail), - atomic_read(&n_rcu_torture_free)); + atomic_read(&n_rcu_torture_free), + atomic_read(&n_rcu_torture_mberror)); + if (atomic_read(&n_rcu_torture_mberror) != 0) + cnt += sprintf(&page[cnt], " !!!"); cnt += sprintf(&page[cnt], "\nrcutorture: "); - if (i > 1) + if (i > 1) { cnt += sprintf(&page[cnt], "!!! "); + atomic_inc(&n_rcu_torture_error); + } cnt += sprintf(&page[cnt], "Reader Pipe: "); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) cnt += sprintf(&page[cnt], " %ld", pipesummary[i]); @@ -400,7 +413,9 @@ rcu_torture_cleanup(void) for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++) synchronize_rcu(); rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ - PRINTK_STRING("--- End of test"); + printk(KERN_ALERT TORTURE_FLAG + "--- End of test: %s\n", + atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE"); } static int @@ -425,6 +440,7 @@ rcu_torture_init(void) INIT_LIST_HEAD(&rcu_torture_freelist); for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) { + rcu_tortures[i].rtort_mbtest = 0; list_add_tail(&rcu_tortures[i].rtort_free, &rcu_torture_freelist); } @@ -436,6 +452,8 @@ rcu_torture_init(void) atomic_set(&n_rcu_torture_alloc, 0); atomic_set(&n_rcu_torture_alloc_fail, 0); atomic_set(&n_rcu_torture_free, 0); + atomic_set(&n_rcu_torture_mberror, 0); + atomic_set(&n_rcu_torture_error, 0); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) atomic_set(&rcu_torture_wcount[i], 0); for_each_cpu(cpu) { From 58bb01a9cd72eebf60d00c57b948a76aa7b85727 Mon Sep 17 00:00:00 2001 From: Hans Reiser Date: Fri, 18 Nov 2005 01:10:53 -0800 Subject: [PATCH 160/169] [PATCH] re-export clear_page_dirty_for_io() 2.6.14 has this exported, and reiser4 (at least) uses it. Put things back the way they were. Signed-off-by: Vladimir V. Saveliev Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page-writeback.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 74138c9a22b9..0166ea15c9ee 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -750,6 +750,7 @@ int clear_page_dirty_for_io(struct page *page) } return TestClearPageDirty(page); } +EXPORT_SYMBOL(clear_page_dirty_for_io); int test_clear_page_writeback(struct page *page) { From 44f080c46e84090daf81b4d142359f8e38d7c5ee Mon Sep 17 00:00:00 2001 From: Matt Domsch Date: Fri, 18 Nov 2005 01:10:54 -0800 Subject: [PATCH 161/169] [PATCH] ipmi: missing NULL test for kthread On IPMI systems with BT interfaces, we don't start the kernel thread, so smi_info->thread is NULL. Test for NULL when stopping the thread, because kthread_stop() doesn't, and an oops ensues otherwise. Signed-off-by: Matt Domsch Acked-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_si_intf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index ea89dca3dbb5..01a1f6badb53 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2203,7 +2203,7 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { - if (smi_info->thread != ERR_PTR(-ENOMEM)) + if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM)) kthread_stop(smi_info->thread); del_timer_sync(&smi_info->si_timer); } From 966cc04b4d9d3d7a49e744888628acc36ebec5d4 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Fri, 18 Nov 2005 01:10:55 -0800 Subject: [PATCH 162/169] [PATCH] ppc32: add missing define for fs_enet Ethernet driver This adds the FCC_PSMR_RMII defenition, which is used in fs_enet to enable RMII mode. Signed-off-by: Vitaly Bordug Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-ppc/cpm2.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index 43d2ebbc7748..b638b87cebe3 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1091,5 +1091,7 @@ typedef struct im_idma { #define CPM_IMMR_OFFSET 0x101a8 #endif +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ From ba3961152e7016237e15e3dfc18f08c1853d156b Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Fri, 18 Nov 2005 01:10:57 -0800 Subject: [PATCH 163/169] [PATCH] tpm: use flush_scheduled_work() Add the necessary flush_schedule_work calls when canceling the timer. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 0b283d246730..a9be0e8eaea5 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -377,6 +377,7 @@ int tpm_release(struct inode *inode, struct file *file) file->private_data = NULL; chip->num_opens--; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); atomic_set(&chip->data_pending, 0); put_device(chip->dev); kfree(chip->data_buffer); @@ -428,6 +429,7 @@ ssize_t tpm_read(struct file * file, char __user *buf, int ret_size; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); ret_size = atomic_read(&chip->data_pending); atomic_set(&chip->data_pending, 0); if (ret_size > 0) { /* relay data */ From 90612b308f2a2cc8aa08fbaf6f7184f5b7b5a855 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Fri, 18 Nov 2005 01:10:58 -0800 Subject: [PATCH 164/169] [PATCH] tpm: use ioread8 and iowrite8 Use ioread8 and iowrite8 as suggested. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_atmel.c | 47 ++++++++++++++++++++---------------- drivers/char/tpm/tpm_atmel.h | 22 +++++++++-------- 2 files changed, 38 insertions(+), 31 deletions(-) diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index deb4b5c80914..ff3654964fe3 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -47,13 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) return -EIO; for (i = 0; i < 6; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading header\n"); + dev_err(chip->dev, "error reading header\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* size of the data received */ @@ -64,10 +63,9 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) dev_err(chip->dev, "Recv size(%d) less than available space\n", size); for (; i < size; i++) { /* clear the waiting data anyway */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } } @@ -76,17 +74,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) /* read all the data available */ for (; i < size; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* make sure data available is gone */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); + if (status & ATML_STATUS_DATA_AVAIL) { dev_err(chip->dev, "data available is stuck\n"); return -EIO; @@ -102,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) dev_dbg(chip->dev, "tpm_atml_send:\n"); for (i = 0; i < count; i++) { dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]); - atmel_putb(buf[i], chip, 0); + iowrite8(buf[i], chip->vendor->iobase); } return count; @@ -110,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) static void tpm_atml_cancel(struct tpm_chip *chip) { - atmel_putb(ATML_STATUS_ABORT, chip, 1); + iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1); } static u8 tpm_atml_status(struct tpm_chip *chip) { - return atmel_getb(chip, 1); + return ioread8(chip->vendor->iobase + 1); } static struct file_operations atmel_ops = { @@ -162,7 +160,8 @@ static void atml_plat_remove(void) if (chip) { if (chip->vendor->have_region) - atmel_release_region(chip->vendor->base, chip->vendor->region_size); + atmel_release_region(chip->vendor->base, + chip->vendor->region_size); atmel_put_base_addr(chip->vendor); tpm_remove_hardware(chip->dev); platform_device_unregister(pdev); @@ -183,14 +182,19 @@ static int __init init_atmel(void) driver_register(&atml_drv); - if (atmel_get_base_addr(&tpm_atmel) != 0) { + if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) { rc = -ENODEV; goto err_unreg_drv; } - tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1; + tpm_atmel.have_region = + (atmel_request_region + (tpm_atmel.base, tpm_atmel.region_size, + "tpm_atmel0") == NULL) ? 0 : 1; - if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) { + if (IS_ERR + (pdev = + platform_device_register_simple("tpm_atmel", -1, NULL, 0))) { rc = PTR_ERR(pdev); goto err_rel_reg; } @@ -202,9 +206,10 @@ static int __init init_atmel(void) err_unreg_dev: platform_device_unregister(pdev); err_rel_reg: - if (tpm_atmel.have_region) - atmel_release_region(tpm_atmel.base, tpm_atmel.region_size); atmel_put_base_addr(&tpm_atmel); + if (tpm_atmel.have_region) + atmel_release_region(tpm_atmel.base, + tpm_atmel.region_size); err_unreg_drv: driver_unregister(&atml_drv); return rc; diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h index 3c5b9a8d1c49..d3478aaadd77 100644 --- a/drivers/char/tpm/tpm_atmel.h +++ b/drivers/char/tpm/tpm_atmel.h @@ -27,12 +27,14 @@ #define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset) #define atmel_request_region request_mem_region #define atmel_release_region release_mem_region -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) + +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { iounmap(vendor->iobase); } -static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { struct device_node *dn; unsigned long address, size; @@ -44,11 +46,11 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) dn = of_find_node_by_name(NULL, "tpm"); if (!dn) - return 1; + return NULL; if (!device_is_compatible(dn, "AT97SC3201")) { of_node_put(dn); - return 1; + return NULL; } reg = (unsigned int *) get_property(dn, "reg", ®len); @@ -71,8 +73,7 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) vendor->base = address; vendor->region_size = size; - vendor->iobase = ioremap(address, size); - return 0; + return ioremap(vendor->base, vendor->region_size); } #else #define atmel_getb(chip, offset) inb(chip->vendor->base + offset) @@ -105,18 +106,19 @@ static int atmel_verify_tpm11(void) return 0; } -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { } /* Determine where to talk to device */ -static unsigned long atmel_get_base_addr(struct tpm_vendor_specific +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { int lo, hi; if (atmel_verify_tpm11() != 0) - return 1; + return NULL; lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); @@ -124,6 +126,6 @@ static unsigned long atmel_get_base_addr(struct tpm_vendor_specific vendor->base = (hi << 8) | lo; vendor->region_size = 2; - return 0; + return ioport_map(vendor->base, vendor->region_size); } #endif From c4b32b8b010d036dc03f77b0ef2a747db0cc3588 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Fri, 18 Nov 2005 01:10:59 -0800 Subject: [PATCH 165/169] [PATCH] tpm: remove PCI kconfig dependency The driver dependencies on PCI have been removed. This patch clears that up in the Kconfig file Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index b58adfe3ed19..a6873bf89ffa 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -6,7 +6,7 @@ menu "TPM devices" config TCG_TPM tristate "TPM Hardware Support" - depends on EXPERIMENTAL && PCI + depends on EXPERIMENTAL ---help--- If you have a TPM security chip in your system, which implements the Trusted Computing Group's specification, From 34ef75f09f09611b62ae11ae36c3c7b0a6a8a9cb Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Fri, 18 Nov 2005 01:10:59 -0800 Subject: [PATCH 166/169] [PATCH] md: don't pass a NULL file* into ->prepare_write() Some filesystems go oops. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/bitmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 51315302a85e..252d55df9642 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -326,9 +326,9 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait) } } - ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE); + ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE); if (!ret) - ret = page->mapping->a_ops->commit_write(NULL, page, 0, + ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0, PAGE_SIZE); if (ret) { unlock_page(page); From c0e485216de80046dd0d448b7cd530dbfc31402f Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 18 Nov 2005 01:11:01 -0800 Subject: [PATCH 167/169] [PATCH] md: fix is_mddev_idle calculation now that disk/sector accounting happens when request completes md needs to monitor the rate of requests to its devices when doing resync/recovery so that it can back-off when there is non-resync IO. It does this by comparing resync IO, which it counts, with total IO which is taken from disk_stats. disk_stats were recently changed to account sectors when a request completes instead of when it is queued. This upsets md's calculations. We could do the sync_io accounting at the end of requests too, but that has problems. If an underlying device is an md array, the accounting will still be done when the request is submitted. This could be changed for some raid levels, but it cannot be changed for raid0 or linear without substantial code changes. So instead, we increase the error that is_mddev_idle allows, up to the maximum amount of resync IO that can be in flight at any time. The calculation is current fragile as each personality as different limits for in-flight resync. This should be fixed up. For now, this simple patch fixes the problem. Increasing the error margin decreases the sensitivity to non-resync IO. To partially compensate for this, the time to wait when non-resync IO is detected is increased so that less steady IO is required to keep the resync at bay. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index f3fed662f32e..78c7418478d6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3846,11 +3846,20 @@ static int is_mddev_idle(mddev_t *mddev) curr_events = disk_stat_read(disk, sectors[0]) + disk_stat_read(disk, sectors[1]) - atomic_read(&disk->sync_io); - /* Allow some slack between valud of curr_events and last_events, - * as there are some uninteresting races. + /* The difference between curr_events and last_events + * will be affected by any new non-sync IO (making + * curr_events bigger) and any difference in the amount of + * in-flight syncio (making current_events bigger or smaller) + * The amount in-flight is currently limited to + * 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6 + * which is at most 4096 sectors. + * These numbers are fairly fragile and should be made + * more robust, probably by enforcing the + * 'window size' that md_do_sync sort-of uses. + * * Note: the following is an unsigned comparison. */ - if ((curr_events - rdev->last_events + 32) > 64) { + if ((curr_events - rdev->last_events + 4096) > 8192) { rdev->last_events = curr_events; idle = 0; } @@ -4109,7 +4118,7 @@ static void md_do_sync(mddev_t *mddev) if (currspeed > sysctl_speed_limit_min) { if ((currspeed > sysctl_speed_limit_max) || !is_mddev_idle(mddev)) { - msleep(250); + msleep(500); goto repeat; } } From b50ce2324cecf4efc7babe31f4aa1a07f9157317 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Fri, 18 Nov 2005 01:11:02 -0800 Subject: [PATCH 168/169] [PATCH] ppc64 need HPAGE_SHIFT when huge pages disabled With the new powerpc architecture we don't seem to be able to disable huge pages anymore. mm/built-in.o(.toc1+0xae0): undefined reference to `HPAGE_SHIFT' make: *** [.tmp_vmlinux1] Error 1 We seem to need to define HPAGE_SHIFT to something when HUGETLB_PAGE isn't defined. This patch defines it to PAGE_SHIFT when we have no support. Signed-off-by: Andy Whitcroft Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-powerpc/page_64.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index c16f106b5373..1e6e7846824f 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -86,7 +86,11 @@ static inline void copy_page(void *to, void *from) extern u64 ppc64_pft_size; /* Large pages size */ +#ifdef CONFIG_HUGETLB_PAGE extern unsigned int HPAGE_SHIFT; +#else +#define HPAGE_SHIFT PAGE_SHIFT +#endif #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) From fc71fe40d2bedcc57d3406bf2050481f8b3441b6 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 18 Nov 2005 01:11:03 -0800 Subject: [PATCH 169/169] [PATCH] s390: fix class_device_create calls in 3270 the driver Add the missing NULL argument to the class_device_create calls. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/s390/char/raw3270.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index f5b7d360fc10..1026f2bc3185 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -1179,12 +1179,12 @@ raw3270_create_attributes(struct raw3270 *rp) //FIXME: check return code sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group); rp->clttydev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_TTY3270_MAJOR, rp->minor), &rp->cdev->dev, "tty%s", rp->cdev->dev.bus_id); rp->cltubdev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_FS3270_MAJOR, rp->minor), &rp->cdev->dev, "tub%s", rp->cdev->dev.bus_id);