diff --git a/[refs] b/[refs] index fa725194256a..6070a9292c13 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 23e7dd7d95f6fdc167a6d6ddea79ced0af33bbff +refs/heads/master: d6d3f5bc68be3c4ab84e6f1f9db92291da671504 diff --git a/trunk/.gitignore b/trunk/.gitignore new file mode 100644 index 000000000000..5014bfa48ac1 --- /dev/null +++ b/trunk/.gitignore @@ -0,0 +1,30 @@ +# +# NOTE! Don't add files that are generated in specific +# subdirectories here. Add them in the ".gitignore" file +# in that subdirectory instead. +# +# Normal rules +# +.* +*.o +*.a +*.s +*.ko +*.mod.c + +# +# Top-level generic files +# +vmlinux* +System.map +Module.symvers + +# +# Generated include files +# +include/asm +include/config +include/linux/autoconf.h +include/linux/compile.h +include/linux/version.h + diff --git a/trunk/COPYING b/trunk/COPYING index 2a7e338ec2fc..ca442d313d86 100644 --- a/trunk/COPYING +++ b/trunk/COPYING @@ -18,7 +18,7 @@ Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. @@ -321,7 +321,7 @@ the "copyright" line and a pointer to where the full notice is found. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. diff --git a/trunk/CREDITS b/trunk/CREDITS index f553f8cfaa62..a347520bef2d 100644 --- a/trunk/CREDITS +++ b/trunk/CREDITS @@ -2211,6 +2211,15 @@ D: OV511 driver S: (address available on request) S: USA +N: Ian McDonald +E: iam4@cs.waikato.ac.nz +E: imcdnzl@gmail.com +W: http://wand.net.nz/~iam4 +W: http://imcdnzl.blogspot.com +D: DCCP, CCID3 +S: Hamilton +S: New Zealand + N: Patrick McHardy E: kaber@trash.net P: 1024D/12155E80 B128 7DE6 FF0A C2B2 48BE AB4C C9D4 964E 1215 5E80 @@ -2246,19 +2255,12 @@ S: D-90453 Nuernberg S: Germany N: Arnaldo Carvalho de Melo -E: acme@conectiva.com.br -E: acme@kernel.org -E: acme@gnu.org -W: http://bazar2.conectiva.com.br/~acme -W: http://advogato.org/person/acme +E: acme@mandriva.com +E: acme@ghostprotocols.net +W: http://oops.ghostprotocols.net:81/blog/ P: 1024D/9224DF01 D5DF E3BB E3C8 BCBB F8AD 841A B6AB 4681 9224 DF01 -D: wanrouter hacking -D: misc Makefile, Config.in, drivers and network stacks fixes -D: IPX & LLC network stacks maintainer -D: Cyclom 2X synchronous card driver -D: wl3501 PCMCIA wireless card driver -D: i18n for minicom, net-tools, util-linux, fetchmail, etc -S: Conectiva S.A. +D: IPX, LLC, DCCP, cyc2x, wl3501_cs, net/ hacks +S: Mandriva S: R. Tocantins, 89 - Cristo Rei S: 80050-430 - Curitiba - Paraná S: Brazil diff --git a/trunk/Documentation/00-INDEX b/trunk/Documentation/00-INDEX index f28a24e0279b..433cf5e9ae04 100644 --- a/trunk/Documentation/00-INDEX +++ b/trunk/Documentation/00-INDEX @@ -46,6 +46,8 @@ SubmittingPatches - procedure to get a source patch included into the kernel tree. VGA-softcursor.txt - how to change your VGA cursor from a blinking underscore. +applying-patches.txt + - description of various trees and how to apply their patches. arm/ - directory with info about Linux on the ARM architecture. basic_profiling.txt @@ -275,7 +277,7 @@ tty.txt unicode.txt - info on the Unicode character/font mapping used in Linux. uml/ - - directory with infomation about User Mode Linux. + - directory with information about User Mode Linux. usb/ - directory with info regarding the Universal Serial Bus. video4linux/ diff --git a/trunk/Documentation/Changes b/trunk/Documentation/Changes index 5eaab0441d76..27232be26e1a 100644 --- a/trunk/Documentation/Changes +++ b/trunk/Documentation/Changes @@ -237,6 +237,12 @@ udev udev is a userspace application for populating /dev dynamically with only entries for devices actually present. udev replaces devfs. +FUSE +---- + +Needs libfuse 2.4.0 or later. Absolute minimum is 2.3.0 but mount +options 'direct_io' and 'kernel_cache' won't work. + Networking ========== @@ -390,6 +396,10 @@ udev ---- o +FUSE +---- +o + Networking ********** diff --git a/trunk/Documentation/CodingStyle b/trunk/Documentation/CodingStyle index f25b3953f513..eb7db3c19227 100644 --- a/trunk/Documentation/CodingStyle +++ b/trunk/Documentation/CodingStyle @@ -236,6 +236,9 @@ ugly), but try to avoid excess. Instead, put the comments at the head of the function, telling people what it does, and possibly WHY it does it. +When commenting the kernel API functions, please use the kerneldoc format. +See the files Documentation/kernel-doc-nano-HOWTO.txt and scripts/kernel-doc +for details. Chapter 8: You've made a mess of it @@ -407,7 +410,26 @@ Kernel messages do not have to be terminated with a period. Printing numbers in parentheses (%d) adds no value and should be avoided. - Chapter 13: References + Chapter 13: Allocating memory + +The kernel provides the following general purpose memory allocators: +kmalloc(), kzalloc(), kcalloc(), and vmalloc(). Please refer to the API +documentation for further information about them. + +The preferred form for passing a size of a struct is the following: + + p = kmalloc(sizeof(*p), ...); + +The alternative form where struct name is spelled out hurts readability and +introduces an opportunity for a bug when the pointer variable type is changed +but the corresponding sizeof that is passed to a memory allocator is not. + +Casting the return value which is a void pointer is redundant. The conversion +from void pointer to any other pointer type is guaranteed by the C programming +language. + + + Chapter 14: References The C Programming Language, Second Edition by Brian W. Kernighan and Dennis M. Ritchie. diff --git a/trunk/Documentation/DMA-API.txt b/trunk/Documentation/DMA-API.txt index 6ee3cd6134df..1af0f2d50220 100644 --- a/trunk/Documentation/DMA-API.txt +++ b/trunk/Documentation/DMA-API.txt @@ -121,7 +121,7 @@ pool's device. dma_addr_t addr); This puts memory back into the pool. The pool is what was passed to -the the pool allocation routine; the cpu and dma addresses are what +the pool allocation routine; the cpu and dma addresses are what were returned when that routine allocated the memory being freed. diff --git a/trunk/Documentation/DMA-ISA-LPC.txt b/trunk/Documentation/DMA-ISA-LPC.txt new file mode 100644 index 000000000000..705f6be92bdb --- /dev/null +++ b/trunk/Documentation/DMA-ISA-LPC.txt @@ -0,0 +1,151 @@ + DMA with ISA and LPC devices + ============================ + + Pierre Ossman + +This document describes how to do DMA transfers using the old ISA DMA +controller. Even though ISA is more or less dead today the LPC bus +uses the same DMA system so it will be around for quite some time. + +Part I - Headers and dependencies +--------------------------------- + +To do ISA style DMA you need to include two headers: + +#include +#include + +The first is the generic DMA API used to convert virtual addresses to +physical addresses (see Documentation/DMA-API.txt for details). + +The second contains the routines specific to ISA DMA transfers. Since +this is not present on all platforms make sure you construct your +Kconfig to be dependent on ISA_DMA_API (not ISA) so that nobody tries +to build your driver on unsupported platforms. + +Part II - Buffer allocation +--------------------------- + +The ISA DMA controller has some very strict requirements on which +memory it can access so extra care must be taken when allocating +buffers. + +(You usually need a special buffer for DMA transfers instead of +transferring directly to and from your normal data structures.) + +The DMA-able address space is the lowest 16 MB of _physical_ memory. +Also the transfer block may not cross page boundaries (which are 64 +or 128 KiB depending on which channel you use). + +In order to allocate a piece of memory that satisfies all these +requirements you pass the flag GFP_DMA to kmalloc. + +Unfortunately the memory available for ISA DMA is scarce so unless you +allocate the memory during boot-up it's a good idea to also pass +__GFP_REPEAT and __GFP_NOWARN to make the allocater try a bit harder. + +(This scarcity also means that you should allocate the buffer as +early as possible and not release it until the driver is unloaded.) + +Part III - Address translation +------------------------------ + +To translate the virtual address to a physical use the normal DMA +API. Do _not_ use isa_virt_to_phys() even though it does the same +thing. The reason for this is that the function isa_virt_to_phys() +will require a Kconfig dependency to ISA, not just ISA_DMA_API which +is really all you need. Remember that even though the DMA controller +has its origins in ISA it is used elsewhere. + +Note: x86_64 had a broken DMA API when it came to ISA but has since +been fixed. If your arch has problems then fix the DMA API instead of +reverting to the ISA functions. + +Part IV - Channels +------------------ + +A normal ISA DMA controller has 8 channels. The lower four are for +8-bit transfers and the upper four are for 16-bit transfers. + +(Actually the DMA controller is really two separate controllers where +channel 4 is used to give DMA access for the second controller (0-3). +This means that of the four 16-bits channels only three are usable.) + +You allocate these in a similar fashion as all basic resources: + +extern int request_dma(unsigned int dmanr, const char * device_id); +extern void free_dma(unsigned int dmanr); + +The ability to use 16-bit or 8-bit transfers is _not_ up to you as a +driver author but depends on what the hardware supports. Check your +specs or test different channels. + +Part V - Transfer data +---------------------- + +Now for the good stuff, the actual DMA transfer. :) + +Before you use any ISA DMA routines you need to claim the DMA lock +using claim_dma_lock(). The reason is that some DMA operations are +not atomic so only one driver may fiddle with the registers at a +time. + +The first time you use the DMA controller you should call +clear_dma_ff(). This clears an internal register in the DMA +controller that is used for the non-atomic operations. As long as you +(and everyone else) uses the locking functions then you only need to +reset this once. + +Next, you tell the controller in which direction you intend to do the +transfer using set_dma_mode(). Currently you have the options +DMA_MODE_READ and DMA_MODE_WRITE. + +Set the address from where the transfer should start (this needs to +be 16-bit aligned for 16-bit transfers) and how many bytes to +transfer. Note that it's _bytes_. The DMA routines will do all the +required translation to values that the DMA controller understands. + +The final step is enabling the DMA channel and releasing the DMA +lock. + +Once the DMA transfer is finished (or timed out) you should disable +the channel again. You should also check get_dma_residue() to make +sure that all data has been transfered. + +Example: + +int flags, residue; + +flags = claim_dma_lock(); + +clear_dma_ff(); + +set_dma_mode(channel, DMA_MODE_WRITE); +set_dma_addr(channel, phys_addr); +set_dma_count(channel, num_bytes); + +dma_enable(channel); + +release_dma_lock(flags); + +while (!device_done()); + +flags = claim_dma_lock(); + +dma_disable(channel); + +residue = dma_get_residue(channel); +if (residue != 0) + printk(KERN_ERR "driver: Incomplete DMA transfer!" + " %d bytes left!\n", residue); + +release_dma_lock(flags); + +Part VI - Suspend/resume +------------------------ + +It is the driver's responsibility to make sure that the machine isn't +suspended while a DMA transfer is in progress. Also, all DMA settings +are lost when the system suspends so if your driver relies on the DMA +controller being in a certain state then you have to restore these +registers upon resume. diff --git a/trunk/Documentation/DocBook/journal-api.tmpl b/trunk/Documentation/DocBook/journal-api.tmpl index 1ef6f43c6d8f..341aaa4ce481 100644 --- a/trunk/Documentation/DocBook/journal-api.tmpl +++ b/trunk/Documentation/DocBook/journal-api.tmpl @@ -116,7 +116,7 @@ filesystem. Almost. You still need to actually journal your filesystem changes, this is done by wrapping them into transactions. Additionally you -also need to wrap the modification of each of the the buffers +also need to wrap the modification of each of the buffers with calls to the journal layer, so it knows what the modifications you are actually making are. To do this use journal_start() which returns a transaction handle. @@ -128,7 +128,7 @@ and its counterpart journal_stop(), which indicates the end of a transaction are nestable calls, so you can reenter a transaction if necessary, but remember you must call journal_stop() the same number of times as journal_start() before the transaction is completed (or more accurately -leaves the the update phase). Ext3/VFS makes use of this feature to simplify +leaves the update phase). Ext3/VFS makes use of this feature to simplify quota support. diff --git a/trunk/Documentation/DocBook/kernel-hacking.tmpl b/trunk/Documentation/DocBook/kernel-hacking.tmpl index 49a9ef82d575..582032eea872 100644 --- a/trunk/Documentation/DocBook/kernel-hacking.tmpl +++ b/trunk/Documentation/DocBook/kernel-hacking.tmpl @@ -8,8 +8,7 @@ - Paul - Rusty + Rusty Russell
@@ -20,7 +19,7 @@ - 2001 + 2005 Rusty Russell @@ -64,7 +63,7 @@ Introduction - Welcome, gentle reader, to Rusty's Unreliable Guide to Linux + Welcome, gentle reader, to Rusty's Remarkably Unreliable Guide to Linux Kernel Hacking. This document describes the common routines and general requirements for kernel code: its goal is to serve as a primer for Linux kernel development for experienced C @@ -96,13 +95,13 @@ - not associated with any process, serving a softirq, tasklet or bh; + not associated with any process, serving a softirq or tasklet; - running in kernel space, associated with a process; + running in kernel space, associated with a process (user context); @@ -114,11 +113,12 @@ - There is a strict ordering between these: other than the last - category (userspace) each can only be pre-empted by those above. - For example, while a softirq is running on a CPU, no other - softirq will pre-empt it, but a hardware interrupt can. However, - any other CPUs in the system execute independently. + There is an ordering between these. The bottom two can preempt + each other, but above that is a strict hierarchy: each can only be + preempted by the ones above it. For example, while a softirq is + running on a CPU, no other softirq will preempt it, but a hardware + interrupt can. However, any other CPUs in the system execute + independently. @@ -130,10 +130,10 @@ User Context - User context is when you are coming in from a system call or - other trap: you can sleep, and you own the CPU (except for - interrupts) until you call schedule(). - In other words, user context (unlike userspace) is not pre-emptable. + User context is when you are coming in from a system call or other + trap: like userspace, you can be preempted by more important tasks + and by interrupts. You can sleep, by calling + schedule(). @@ -153,7 +153,7 @@ - Beware that if you have interrupts or bottom halves disabled + Beware that if you have preemption or softirqs disabled (see below), in_interrupt() will return a false positive. @@ -168,10 +168,10 @@ keyboard are examples of real hardware which produce interrupts at any time. The kernel runs interrupt handlers, which services the hardware. The kernel - guarantees that this handler is never re-entered: if another + guarantees that this handler is never re-entered: if the same interrupt arrives, it is queued (or dropped). Because it disables interrupts, this handler has to be fast: frequently it - simply acknowledges the interrupt, marks a `software interrupt' + simply acknowledges the interrupt, marks a 'software interrupt' for execution and exits. @@ -188,60 +188,52 @@ - Software Interrupt Context: Bottom Halves, Tasklets, softirqs + Software Interrupt Context: Softirqs and Tasklets Whenever a system call is about to return to userspace, or a - hardware interrupt handler exits, any `software interrupts' + hardware interrupt handler exits, any 'software interrupts' which are marked pending (usually by hardware interrupts) are run (kernel/softirq.c). Much of the real interrupt handling work is done here. Early in - the transition to SMP, there were only `bottom + the transition to SMP, there were only 'bottom halves' (BHs), which didn't take advantage of multiple CPUs. Shortly after we switched from wind-up computers made of match-sticks and snot, - we abandoned this limitation. + we abandoned this limitation and switched to 'softirqs'. include/linux/interrupt.h lists the - different BH's. No matter how many CPUs you have, no two BHs will run at - the same time. This made the transition to SMP simpler, but sucks hard for - scalable performance. A very important bottom half is the timer - BH (include/linux/timer.h): you - can register to have it call functions for you in a given length of time. + different softirqs. A very important softirq is the + timer softirq (include/linux/timer.h): you can + register to have it call functions for you in a given length of + time. - 2.3.43 introduced softirqs, and re-implemented the (now - deprecated) BHs underneath them. Softirqs are fully-SMP - versions of BHs: they can run on as many CPUs at once as - required. This means they need to deal with any races in shared - data using their own locks. A bitmask is used to keep track of - which are enabled, so the 32 available softirqs should not be - used up lightly. (Yes, people will - notice). - - - - tasklets (include/linux/interrupt.h) - are like softirqs, except they are dynamically-registrable (meaning you - can have as many as you want), and they also guarantee that any tasklet - will only run on one CPU at any time, although different tasklets can - run simultaneously (unlike different BHs). + Softirqs are often a pain to deal with, since the same softirq + will run simultaneously on more than one CPU. For this reason, + tasklets (include/linux/interrupt.h) are more + often used: they are dynamically-registrable (meaning you can have + as many as you want), and they also guarantee that any tasklet + will only run on one CPU at any time, although different tasklets + can run simultaneously. - The name `tasklet' is misleading: they have nothing to do with `tasks', + The name 'tasklet' is misleading: they have nothing to do with 'tasks', and probably more to do with some bad vodka Alexey Kuznetsov had at the time. - You can tell you are in a softirq (or bottom half, or tasklet) + You can tell you are in a softirq (or tasklet) using the in_softirq() macro (include/linux/interrupt.h). @@ -288,11 +280,10 @@ A rigid stack limit - The kernel stack is about 6K in 2.2 (for most - architectures: it's about 14K on the Alpha), and shared - with interrupts so you can't use it all. Avoid deep - recursion and huge local arrays on the stack (allocate - them dynamically instead). + Depending on configuration options the kernel stack is about 3K to 6K for most 32-bit architectures: it's + about 14K on most 64-bit archs, and often shared with interrupts + so you can't use it all. Avoid deep recursion and huge local + arrays on the stack (allocate them dynamically instead). @@ -339,7 +330,7 @@ asmlinkage long sys_mycall(int arg) If all your routine does is read or write some parameter, consider - implementing a sysctl interface instead. + implementing a sysfs interface instead. @@ -417,7 +408,10 @@ cond_resched(); /* Will sleep */ - You will eventually lock up your box if you break these rules. + You should always compile your kernel + CONFIG_DEBUG_SPINLOCK_SLEEP on, and it will warn + you if you break these rules. If you do break + the rules, you will eventually lock up your box. @@ -515,8 +509,7 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); success). - [Yes, this moronic interface makes me cringe. Please submit a - patch and become my hero --RR.] + [Yes, this moronic interface makes me cringe. The flamewar comes up every year or so. --RR.] The functions may sleep implicitly. This should never be called @@ -587,10 +580,11 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); - If you see a kmem_grow: Called nonatomically from int - warning message you called a memory allocation function - from interrupt context without GFP_ATOMIC. - You should really fix that. Run, don't walk. + If you see a sleeping function called from invalid + context warning message, then maybe you called a + sleeping allocation function from interrupt context without + GFP_ATOMIC. You should really fix that. + Run, don't walk. @@ -639,16 +633,16 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); - <function>udelay()</function>/<function>mdelay()</function> + <title><function>mdelay()</function>/<function>udelay()</function> <filename class="headerfile">include/asm/delay.h</filename> <filename class="headerfile">include/linux/delay.h</filename> - The udelay() function can be used for small pauses. - Do not use large values with udelay() as you risk + The udelay() and ndelay() functions can be used for small pauses. + Do not use large values with them as you risk overflow - the helper function mdelay() is useful - here, or even consider schedule_timeout(). + here, or consider msleep(). @@ -698,8 +692,8 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); These routines disable soft interrupts on the local CPU, and restore them. They are reentrant; if soft interrupts were disabled before, they will still be disabled after this pair - of functions has been called. They prevent softirqs, tasklets - and bottom halves from running on the current CPU. + of functions has been called. They prevent softirqs and tasklets + from running on the current CPU. @@ -708,10 +702,16 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); include/asm/smp.h - smp_processor_id() returns the current - processor number, between 0 and NR_CPUS (the - maximum number of CPUs supported by Linux, currently 32). These - values are not necessarily continuous. + get_cpu() disables preemption (so you won't + suddenly get moved to another CPU) and returns the current + processor number, between 0 and NR_CPUS. Note + that the CPU numbers are not necessarily continuous. You return + it again with put_cpu() when you are done. + + + If you know you cannot be preempted by another task (ie. you are + in interrupt context, or have preemption disabled) you can use + smp_processor_id(). @@ -722,19 +722,14 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); After boot, the kernel frees up a special section; functions marked with __init and data structures marked with - __initdata are dropped after boot is complete (within - modules this directive is currently ignored). __exit + __initdata are dropped after boot is complete: similarly + modules discard this memory after initialization. __exit is used to declare a function which is only required on exit: the function will be dropped if this file is not compiled as a module. See the header file for use. Note that it makes no sense for a function marked with __init to be exported to modules with EXPORT_SYMBOL() - this will break. - - Static data structures marked as __initdata must be initialised - (as opposed to ordinary static data which is zeroed BSS) and cannot be - const. - @@ -762,9 +757,8 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); The function can return a negative error number to cause module loading to fail (unfortunately, this has no effect if - the module is compiled into the kernel). For modules, this is - called in user context, with interrupts enabled, and the - kernel lock held, so it can sleep. + the module is compiled into the kernel). This function is + called in user context with interrupts enabled, so it can sleep. @@ -779,6 +773,34 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); reached zero. This function can also sleep, but cannot fail: everything must be cleaned up by the time it returns. + + + Note that this macro is optional: if it is not present, your + module will not be removable (except for 'rmmod -f'). + + + + + <function>try_module_get()</function>/<function>module_put()</function> + <filename class="headerfile">include/linux/module.h</filename> + + + These manipulate the module usage count, to protect against + removal (a module also can't be removed if another module uses one + of its exported symbols: see below). Before calling into module + code, you should call try_module_get() on + that module: if it fails, then the module is being removed and you + should act as if it wasn't there. Otherwise, you can safely enter + the module, and call module_put() when you're + finished. + + + + Most registerable structures have an + owner field, such as in the + file_operations structure. Set this field + to the macro THIS_MODULE. + @@ -821,7 +843,7 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); There is a macro to do this: wait_event_interruptible() - include/linux/sched.h The + include/linux/wait.h The first argument is the wait queue head, and the second is an expression which is evaluated; the macro returns 0 when this expression is true, or @@ -847,10 +869,11 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); Call wake_up() - include/linux/sched.h;, + include/linux/wait.h;, which will wake up every process in the queue. The exception is if one has TASK_EXCLUSIVE set, in which case - the remainder of the queue will not be woken. + the remainder of the queue will not be woken. There are other variants + of this basic function available in the same header. @@ -863,7 +886,7 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); first class of operations work on atomic_t include/asm/atomic.h; this - contains a signed integer (at least 24 bits long), and you must use + contains a signed integer (at least 32 bits long), and you must use these functions to manipulate or read atomic_t variables. atomic_read() and atomic_set() get and set the counter, @@ -882,13 +905,12 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); Note that these functions are slower than normal arithmetic, and - so should not be used unnecessarily. On some platforms they - are much slower, like 32-bit Sparc where they use a spinlock. + so should not be used unnecessarily. - The second class of atomic operations is atomic bit operations on a - long, defined in + The second class of atomic operations is atomic bit operations on an + unsigned long, defined in include/linux/bitops.h. These operations generally take a pointer to the bit pattern, and a bit @@ -899,7 +921,7 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); test_and_clear_bit() and test_and_change_bit() do the same thing, except return true if the bit was previously set; these are - particularly useful for very simple locking. + particularly useful for atomically setting flags. @@ -907,12 +929,6 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); than BITS_PER_LONG. The resulting behavior is strange on big-endian platforms though so it is a good idea not to do this. - - - Note that the order of bits depends on the architecture, and in - particular, the bitfield passed to these operations must be at - least as large as a long. - @@ -932,11 +948,8 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); include/linux/module.h - This is the classic method of exporting a symbol, and it works - for both modules and non-modules. In the kernel all these - declarations are often bundled into a single file to help - genksyms (which searches source files for these declarations). - See the comment on genksyms and Makefiles below. + This is the classic method of exporting a symbol: dynamically + loaded modules will be able to use the symbol as normal. @@ -949,7 +962,8 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); symbols exported by EXPORT_SYMBOL_GPL() can only be seen by modules with a MODULE_LICENSE() that specifies a GPL - compatible license. + compatible license. It implies that the function is considered + an internal implementation issue, and not really an interface. @@ -962,12 +976,13 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); include/linux/list.h - There are three sets of linked-list routines in the kernel - headers, but this one seems to be winning out (and Linus has - used it). If you don't have some particular pressing need for - a single list, it's a good choice. In fact, I don't care - whether it's a good choice or not, just use it so we can get - rid of the others. + There used to be three sets of linked-list routines in the kernel + headers, but this one is the winner. If you don't have some + particular pressing need for a single list, it's a good choice. + + + + In particular, list_for_each_entry is useful. @@ -979,14 +994,13 @@ printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress)); convention, and return 0 for success, and a negative error number (eg. -EFAULT) for failure. This can be - unintuitive at first, but it's fairly widespread in the networking - code, for example. + unintuitive at first, but it's fairly widespread in the kernel. - The filesystem code uses ERR_PTR() + Using ERR_PTR() - include/linux/fs.h; to + include/linux/err.h; to encode a negative error number into a pointer, and IS_ERR() and PTR_ERR() to get it back out again: avoids a separate pointer parameter for @@ -1040,7 +1054,7 @@ static struct block_device_operations opt_fops = { supported, due to lack of general use, but the following are considered standard (see the GCC info page section "C Extensions" for more details - Yes, really the info page, the - man page is only a short summary of the stuff in info): + man page is only a short summary of the stuff in info). @@ -1091,7 +1105,7 @@ static struct block_device_operations opt_fops = { - Function names as strings (__FUNCTION__) + Function names as strings (__FUNCTION__). @@ -1164,63 +1178,35 @@ static struct block_device_operations opt_fops = { Usually you want a configuration option for your kernel hack. - Edit Config.in in the appropriate directory - (but under arch/ it's called - config.in). The Config Language used is not - bash, even though it looks like bash; the safe way is to use only - the constructs that you already see in - Config.in files (see - Documentation/kbuild/kconfig-language.txt). - It's good to run "make xconfig" at least once to test (because - it's the only one with a static parser). - - - - Variables which can be Y or N use bool followed by a - tagline and the config define name (which must start with - CONFIG_). The tristate function is the same, but - allows the answer M (which defines - CONFIG_foo_MODULE in your source, instead of - CONFIG_FOO) if CONFIG_MODULES - is enabled. + Edit Kconfig in the appropriate directory. + The Config language is simple to use by cut and paste, and there's + complete documentation in + Documentation/kbuild/kconfig-language.txt. You may well want to make your CONFIG option only visible if CONFIG_EXPERIMENTAL is enabled: this serves as a warning to users. There many other fancy things you can do: see - the various Config.in files for ideas. + the various Kconfig files for ideas. - - - Edit the Makefile: the CONFIG variables are - exported here so you can conditionalize compilation with `ifeq'. - If your file exports symbols then add the names to - export-objs so that genksyms will find them. - - - There is a restriction on the kernel build system that objects - which export symbols must have globally unique names. - If your object does not have a globally unique name then the - standard fix is to move the - EXPORT_SYMBOL() statements to their own - object with a unique name. - This is why several systems have separate exporting objects, - usually suffixed with ksyms. - - + In your description of the option, make sure you address both the + expert user and the user who knows nothing about your feature. Mention + incompatibilities and issues here. Definitely + end your description with if in doubt, say N + (or, occasionally, `Y'); this is for people who have no + idea what you are talking about. - Document your option in Documentation/Configure.help. Mention - incompatibilities and issues here. Definitely - end your description with if in doubt, say N - (or, occasionally, `Y'); this is for people who have no - idea what you are talking about. + Edit the Makefile: the CONFIG variables are + exported here so you can usually just add a "obj-$(CONFIG_xxx) += + xxx.o" line. The syntax is documented in + Documentation/kbuild/makefiles.txt. @@ -1253,20 +1239,12 @@ static struct block_device_operations opt_fops = { - include/linux/brlock.h: + include/asm-i386/delay.h: -extern inline void br_read_lock (enum brlock_indices idx) -{ - /* - * This causes a link-time bug message if an - * invalid index is used: - */ - if (idx >= __BR_END) - __br_lock_usage_bug(); - - read_lock(&__brlock_array[smp_processor_id()][idx]); -} +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) diff --git a/trunk/Documentation/DocBook/mcabook.tmpl b/trunk/Documentation/DocBook/mcabook.tmpl index 4367f4642f3d..42a760cd7467 100644 --- a/trunk/Documentation/DocBook/mcabook.tmpl +++ b/trunk/Documentation/DocBook/mcabook.tmpl @@ -96,7 +96,7 @@ Public Functions Provided -!Earch/i386/kernel/mca.c +!Edrivers/mca/mca-legacy.c diff --git a/trunk/Documentation/DocBook/usb.tmpl b/trunk/Documentation/DocBook/usb.tmpl index f3ef0bf435e9..705c442c7bf4 100644 --- a/trunk/Documentation/DocBook/usb.tmpl +++ b/trunk/Documentation/DocBook/usb.tmpl @@ -841,7 +841,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param) File modification time is not updated by this request. Those struct members are from some interface descriptor - applying to the the current configuration. + applying to the current configuration. The interface number is the bInterfaceNumber value, and the altsetting number is the bAlternateSetting value. (This resets each endpoint in the interface.) diff --git a/trunk/Documentation/IPMI.txt b/trunk/Documentation/IPMI.txt index 84d3d4d10c17..bf1cf98d2a27 100644 --- a/trunk/Documentation/IPMI.txt +++ b/trunk/Documentation/IPMI.txt @@ -605,12 +605,13 @@ is in the ipmi_poweroff module. When the system requests a powerdown, it will send the proper IPMI commands to do this. This is supported on several platforms. -There is a module parameter named "poweroff_control" that may either be zero -(do a power down) or 2 (do a power cycle, power the system off, then power -it on in a few seconds). Setting ipmi_poweroff.poweroff_control=x will do -the same thing on the kernel command line. The parameter is also available -via the proc filesystem in /proc/ipmi/poweroff_control. Note that if the -system does not support power cycling, it will always to the power off. +There is a module parameter named "poweroff_powercycle" that may +either be zero (do a power down) or non-zero (do a power cycle, power +the system off, then power it on in a few seconds). Setting +ipmi_poweroff.poweroff_control=x will do the same thing on the kernel +command line. The parameter is also available via the proc filesystem +in /proc/sys/dev/ipmi/poweroff_powercycle. Note that if the system +does not support power cycling, it will always do the power off. Note that if you have ACPI enabled, the system will prefer using ACPI to power off. diff --git a/trunk/Documentation/MSI-HOWTO.txt b/trunk/Documentation/MSI-HOWTO.txt index d5032eb480aa..63edc5f847c4 100644 --- a/trunk/Documentation/MSI-HOWTO.txt +++ b/trunk/Documentation/MSI-HOWTO.txt @@ -430,7 +430,7 @@ which may result in system hang. The software driver of specific MSI-capable hardware is responsible for whether calling pci_enable_msi or not. A return of zero indicates the kernel successfully initializes the MSI/MSI-X capability structure of the -device funtion. The device function is now running on MSI/MSI-X mode. +device function. The device function is now running on MSI/MSI-X mode. 5.6 How to tell whether MSI/MSI-X is enabled on device function diff --git a/trunk/Documentation/RCU/NMI-RCU.txt b/trunk/Documentation/RCU/NMI-RCU.txt new file mode 100644 index 000000000000..d0634a5c3445 --- /dev/null +++ b/trunk/Documentation/RCU/NMI-RCU.txt @@ -0,0 +1,112 @@ +Using RCU to Protect Dynamic NMI Handlers + + +Although RCU is usually used to protect read-mostly data structures, +it is possible to use RCU to provide dynamic non-maskable interrupt +handlers, as well as dynamic irq handlers. This document describes +how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer +work in "arch/i386/oprofile/nmi_timer_int.c" and in +"arch/i386/kernel/traps.c". + +The relevant pieces of code are listed below, each followed by a +brief explanation. + + static int dummy_nmi_callback(struct pt_regs *regs, int cpu) + { + return 0; + } + +The dummy_nmi_callback() function is a "dummy" NMI handler that does +nothing, but returns zero, thus saying that it did nothing, allowing +the NMI handler to take the default machine-specific action. + + static nmi_callback_t nmi_callback = dummy_nmi_callback; + +This nmi_callback variable is a global function pointer to the current +NMI handler. + + fastcall void do_nmi(struct pt_regs * regs, long error_code) + { + int cpu; + + nmi_enter(); + + cpu = smp_processor_id(); + ++nmi_count(cpu); + + if (!rcu_dereference(nmi_callback)(regs, cpu)) + default_do_nmi(regs); + + nmi_exit(); + } + +The do_nmi() function processes each NMI. It first disables preemption +in the same way that a hardware irq would, then increments the per-CPU +count of NMIs. It then invokes the NMI handler stored in the nmi_callback +function pointer. If this handler returns zero, do_nmi() invokes the +default_do_nmi() function to handle a machine-specific NMI. Finally, +preemption is restored. + +Strictly speaking, rcu_dereference() is not needed, since this code runs +only on i386, which does not need rcu_dereference() anyway. However, +it is a good documentation aid, particularly for anyone attempting to +do something similar on Alpha. + +Quick Quiz: Why might the rcu_dereference() be necessary on Alpha, + given that the code referenced by the pointer is read-only? + + +Back to the discussion of NMI and RCU... + + void set_nmi_callback(nmi_callback_t callback) + { + rcu_assign_pointer(nmi_callback, callback); + } + +The set_nmi_callback() function registers an NMI handler. Note that any +data that is to be used by the callback must be initialized up -before- +the call to set_nmi_callback(). On architectures that do not order +writes, the rcu_assign_pointer() ensures that the NMI handler sees the +initialized values. + + void unset_nmi_callback(void) + { + rcu_assign_pointer(nmi_callback, dummy_nmi_callback); + } + +This function unregisters an NMI handler, restoring the original +dummy_nmi_handler(). However, there may well be an NMI handler +currently executing on some other CPU. We therefore cannot free +up any data structures used by the old NMI handler until execution +of it completes on all other CPUs. + +One way to accomplish this is via synchronize_sched(), perhaps as +follows: + + unset_nmi_callback(); + synchronize_sched(); + kfree(my_nmi_data); + +This works because synchronize_sched() blocks until all CPUs complete +any preemption-disabled segments of code that they were executing. +Since NMI handlers disable preemption, synchronize_sched() is guaranteed +not to return until all ongoing NMI handlers exit. It is therefore safe +to free up the handler's data as soon as synchronize_sched() returns. + + +Answer to Quick Quiz + + Why might the rcu_dereference() be necessary on Alpha, given + that the code referenced by the pointer is read-only? + + Answer: The caller to set_nmi_callback() might well have + initialized some data that is to be used by the + new NMI handler. In this case, the rcu_dereference() + would be needed, because otherwise a CPU that received + an NMI just after the new handler was set might see + the pointer to the new NMI handler, but the old + pre-initialized version of the handler's data. + + More important, the rcu_dereference() makes it clear + to someone reading the code that the pointer is being + protected by RCU. diff --git a/trunk/Documentation/RCU/RTFP.txt b/trunk/Documentation/RCU/RTFP.txt index 9c6d450138ea..fcbcbc35b122 100644 --- a/trunk/Documentation/RCU/RTFP.txt +++ b/trunk/Documentation/RCU/RTFP.txt @@ -2,7 +2,8 @@ Read the F-ing Papers! This document describes RCU-related publications, and is followed by -the corresponding bibtex entries. +the corresponding bibtex entries. A number of the publications may +be found at http://www.rdrop.com/users/paulmck/RCU/. The first thing resembling RCU was published in 1980, when Kung and Lehman [Kung80] recommended use of a garbage collector to defer destruction @@ -113,6 +114,10 @@ describing how to make RCU safe for soft-realtime applications [Sarma04c], and a paper describing SELinux performance with RCU [JamesMorris04b]. +2005 has seen further adaptation of RCU to realtime use, permitting +preemption of RCU realtime critical sections [PaulMcKenney05a, +PaulMcKenney05b]. + Bibtex Entries @article{Kung80 @@ -410,3 +415,32 @@ Oregon Health and Sciences University" \url{http://www.livejournal.com/users/james_morris/2153.html} [Viewed December 10, 2004]" } + +@unpublished{PaulMcKenney05a +,Author="Paul E. McKenney" +,Title="{[RFC]} {RCU} and {CONFIG\_PREEMPT\_RT} progress" +,month="May" +,year="2005" +,note="Available: +\url{http://lkml.org/lkml/2005/5/9/185} +[Viewed May 13, 2005]" +,annotation=" + First publication of working lock-based deferred free patches + for the CONFIG_PREEMPT_RT environment. +" +} + +@conference{PaulMcKenney05b +,Author="Paul E. McKenney and Dipankar Sarma" +,Title="Towards Hard Realtime Response from the Linux Kernel on SMP Hardware" +,Booktitle="linux.conf.au 2005" +,month="April" +,year="2005" +,address="Canberra, Australia" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/realtimeRCU.2005.04.23a.pdf} +[Viewed May 13, 2005]" +,annotation=" + Realtime turns into making RCU yet more realtime friendly. +" +} diff --git a/trunk/Documentation/RCU/UP.txt b/trunk/Documentation/RCU/UP.txt index 3bfb84b3b7db..aab4a9ec3931 100644 --- a/trunk/Documentation/RCU/UP.txt +++ b/trunk/Documentation/RCU/UP.txt @@ -8,7 +8,7 @@ is that since there is only one CPU, it should not be necessary to wait for anything else to get done, since there are no other CPUs for anything else to be happening on. Although this approach will -sort- -of- work a surprising amount of the time, it is a very bad idea in general. -This document presents two examples that demonstrate exactly how bad an +This document presents three examples that demonstrate exactly how bad an idea this is. @@ -26,6 +26,9 @@ from softirq, the list scan would find itself referencing a newly freed element B. This situation can greatly decrease the life expectancy of your kernel. +This same problem can occur if call_rcu() is invoked from a hardware +interrupt handler. + Example 2: Function-Call Fatality @@ -44,8 +47,37 @@ its arguments would cause it to fail to make the fundamental guarantee underlying RCU, namely that call_rcu() defers invoking its arguments until all RCU read-side critical sections currently executing have completed. -Quick Quiz: why is it -not- legal to invoke synchronize_rcu() in -this case? +Quick Quiz #1: why is it -not- legal to invoke synchronize_rcu() in + this case? + + +Example 3: Death by Deadlock + +Suppose that call_rcu() is invoked while holding a lock, and that the +callback function must acquire this same lock. In this case, if +call_rcu() were to directly invoke the callback, the result would +be self-deadlock. + +In some cases, it would possible to restructure to code so that +the call_rcu() is delayed until after the lock is released. However, +there are cases where this can be quite ugly: + +1. If a number of items need to be passed to call_rcu() within + the same critical section, then the code would need to create + a list of them, then traverse the list once the lock was + released. + +2. In some cases, the lock will be held across some kernel API, + so that delaying the call_rcu() until the lock is released + requires that the data item be passed up via a common API. + It is far better to guarantee that callbacks are invoked + with no locks held than to have to modify such APIs to allow + arbitrary data items to be passed back up through them. + +If call_rcu() directly invokes the callback, painful locking restrictions +or API changes would be required. + +Quick Quiz #2: What locking restriction must RCU callbacks respect? Summary @@ -53,12 +85,35 @@ Summary Permitting call_rcu() to immediately invoke its arguments or permitting synchronize_rcu() to immediately return breaks RCU, even on a UP system. So do not do it! Even on a UP system, the RCU infrastructure -must- -respect grace periods. - - -Answer to Quick Quiz - -The calling function is scanning an RCU-protected linked list, and -is therefore within an RCU read-side critical section. Therefore, -the called function has been invoked within an RCU read-side critical -section, and is not permitted to block. +respect grace periods, and -must- invoke callbacks from a known environment +in which no locks are held. + + +Answer to Quick Quiz #1: + Why is it -not- legal to invoke synchronize_rcu() in this case? + + Because the calling function is scanning an RCU-protected linked + list, and is therefore within an RCU read-side critical section. + Therefore, the called function has been invoked within an RCU + read-side critical section, and is not permitted to block. + +Answer to Quick Quiz #2: + What locking restriction must RCU callbacks respect? + + Any lock that is acquired within an RCU callback must be + acquired elsewhere using an _irq variant of the spinlock + primitive. For example, if "mylock" is acquired by an + RCU callback, then a process-context acquisition of this + lock must use something like spin_lock_irqsave() to + acquire the lock. + + If the process-context code were to simply use spin_lock(), + then, since RCU callbacks can be invoked from softirq context, + the callback might be called from a softirq that interrupted + the process-context critical section. This would result in + self-deadlock. + + This restriction might seem gratuitous, since very few RCU + callbacks acquire locks directly. However, a great many RCU + callbacks do acquire locks -indirectly-, for example, via + the kfree() primitive. diff --git a/trunk/Documentation/RCU/checklist.txt b/trunk/Documentation/RCU/checklist.txt index 8f3fb77c9cd3..e118a7c1a092 100644 --- a/trunk/Documentation/RCU/checklist.txt +++ b/trunk/Documentation/RCU/checklist.txt @@ -43,6 +43,10 @@ over a rather long period of time, but improvements are always welcome! rcu_read_lock_bh()) in the read-side critical sections, and are also an excellent aid to readability. + As a rough rule of thumb, any dereference of an RCU-protected + pointer must be covered by rcu_read_lock() or rcu_read_lock_bh() + or by the appropriate update-side lock. + 3. Does the update code tolerate concurrent accesses? The whole point of RCU is to permit readers to run without @@ -90,7 +94,11 @@ over a rather long period of time, but improvements are always welcome! The rcu_dereference() primitive is used by the various "_rcu()" list-traversal primitives, such as the - list_for_each_entry_rcu(). + list_for_each_entry_rcu(). Note that it is perfectly + legal (if redundant) for update-side code to use + rcu_dereference() and the "_rcu()" list-traversal + primitives. This is particularly useful in code + that is common to readers and updaters. b. If the list macros are being used, the list_add_tail_rcu() and list_add_rcu() primitives must be used in order @@ -150,16 +158,9 @@ over a rather long period of time, but improvements are always welcome! Use of the _rcu() list-traversal primitives outside of an RCU read-side critical section causes no harm other than - a slight performance degradation on Alpha CPUs and some - confusion on the part of people trying to read the code. - - Another way of thinking of this is "If you are holding the - lock that prevents the data structure from changing, why do - you also need RCU-based protection?" That said, there may - well be situations where use of the _rcu() list-traversal - primitives while the update-side lock is held results in - simpler and more maintainable code. The jury is still out - on this question. + a slight performance degradation on Alpha CPUs. It can + also be quite helpful in reducing code bloat when common + code is shared between readers and updaters. 10. Conversely, if you are in an RCU read-side critical section, you -must- use the "_rcu()" variants of the list macros. diff --git a/trunk/Documentation/RCU/rcu.txt b/trunk/Documentation/RCU/rcu.txt index eb444006683e..6fa092251586 100644 --- a/trunk/Documentation/RCU/rcu.txt +++ b/trunk/Documentation/RCU/rcu.txt @@ -64,6 +64,54 @@ o I hear that RCU is patented? What is with that? Of these, one was allowed to lapse by the assignee, and the others have been contributed to the Linux kernel under GPL. +o I hear that RCU needs work in order to support realtime kernels? + + Yes, work in progress. + o Where can I find more information on RCU? See the RTFP.txt file in this directory. + Or point your browser at http://www.rdrop.com/users/paulmck/RCU/. + +o What are all these files in this directory? + + + NMI-RCU.txt + + Describes how to use RCU to implement dynamic + NMI handlers, which can be revectored on the fly, + without rebooting. + + RTFP.txt + + List of RCU-related publications and web sites. + + UP.txt + + Discussion of RCU usage in UP kernels. + + arrayRCU.txt + + Describes how to use RCU to protect arrays, with + resizeable arrays whose elements reference other + data structures being of the most interest. + + checklist.txt + + Lists things to check for when inspecting code that + uses RCU. + + listRCU.txt + + Describes how to use RCU to protect linked lists. + This is the simplest and most common use of RCU + in the Linux kernel. + + rcu.txt + + You are reading it! + + whatisRCU.txt + + Overview of how the RCU implementation works. Along + the way, presents a conceptual view of RCU. diff --git a/trunk/Documentation/RCU/rcuref.txt b/trunk/Documentation/RCU/rcuref.txt new file mode 100644 index 000000000000..a23fee66064d --- /dev/null +++ b/trunk/Documentation/RCU/rcuref.txt @@ -0,0 +1,74 @@ +Refcounter framework for elements of lists/arrays protected by +RCU. + +Refcounting on elements of lists which are protected by traditional +reader/writer spinlocks or semaphores are straight forward as in: + +1. 2. +add() search_and_reference() +{ { + alloc_object read_lock(&list_lock); + ... search_for_element + atomic_set(&el->rc, 1); atomic_inc(&el->rc); + write_lock(&list_lock); ... + add_element read_unlock(&list_lock); + ... ... + write_unlock(&list_lock); } +} + +3. 4. +release_referenced() delete() +{ { + ... write_lock(&list_lock); + atomic_dec(&el->rc, relfunc) ... + ... delete_element +} write_unlock(&list_lock); + ... + if (atomic_dec_and_test(&el->rc)) + kfree(el); + ... + } + +If this list/array is made lock free using rcu as in changing the +write_lock in add() and delete() to spin_lock and changing read_lock +in search_and_reference to rcu_read_lock(), the rcuref_get in +search_and_reference could potentially hold reference to an element which +has already been deleted from the list/array. rcuref_lf_get_rcu takes +care of this scenario. search_and_reference should look as; + +1. 2. +add() search_and_reference() +{ { + alloc_object rcu_read_lock(); + ... search_for_element + atomic_set(&el->rc, 1); if (rcuref_inc_lf(&el->rc)) { + write_lock(&list_lock); rcu_read_unlock(); + return FAIL; + add_element } + ... ... + write_unlock(&list_lock); rcu_read_unlock(); +} } +3. 4. +release_referenced() delete() +{ { + ... write_lock(&list_lock); + rcuref_dec(&el->rc, relfunc) ... + ... delete_element +} write_unlock(&list_lock); + ... + if (rcuref_dec_and_test(&el->rc)) + call_rcu(&el->head, el_free); + ... + } + +Sometimes, reference to the element need to be obtained in the +update (write) stream. In such cases, rcuref_inc_lf might be an overkill +since the spinlock serialising list updates are held. rcuref_inc +is to be used in such cases. +For arches which do not have cmpxchg rcuref_inc_lf +api uses a hashed spinlock implementation and the same hashed spinlock +is acquired in all rcuref_xxx primitives to preserve atomicity. +Note: Use rcuref_inc api only if you need to use rcuref_inc_lf on the +refcounter atleast at one place. Mixing rcuref_inc and atomic_xxx api +might lead to races. rcuref_inc_lf() must be used in lockfree +RCU critical sections only. diff --git a/trunk/Documentation/RCU/whatisRCU.txt b/trunk/Documentation/RCU/whatisRCU.txt new file mode 100644 index 000000000000..354d89c78377 --- /dev/null +++ b/trunk/Documentation/RCU/whatisRCU.txt @@ -0,0 +1,902 @@ +What is RCU? + +RCU is a synchronization mechanism that was added to the Linux kernel +during the 2.5 development effort that is optimized for read-mostly +situations. Although RCU is actually quite simple once you understand it, +getting there can sometimes be a challenge. Part of the problem is that +most of the past descriptions of RCU have been written with the mistaken +assumption that there is "one true way" to describe RCU. Instead, +the experience has been that different people must take different paths +to arrive at an understanding of RCU. This document provides several +different paths, as follows: + +1. RCU OVERVIEW +2. WHAT IS RCU'S CORE API? +3. WHAT ARE SOME EXAMPLE USES OF CORE RCU API? +4. WHAT IF MY UPDATING THREAD CANNOT BLOCK? +5. WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU? +6. ANALOGY WITH READER-WRITER LOCKING +7. FULL LIST OF RCU APIs +8. ANSWERS TO QUICK QUIZZES + +People who prefer starting with a conceptual overview should focus on +Section 1, though most readers will profit by reading this section at +some point. People who prefer to start with an API that they can then +experiment with should focus on Section 2. People who prefer to start +with example uses should focus on Sections 3 and 4. People who need to +understand the RCU implementation should focus on Section 5, then dive +into the kernel source code. People who reason best by analogy should +focus on Section 6. Section 7 serves as an index to the docbook API +documentation, and Section 8 is the traditional answer key. + +So, start with the section that makes the most sense to you and your +preferred method of learning. If you need to know everything about +everything, feel free to read the whole thing -- but if you are really +that type of person, you have perused the source code and will therefore +never need this document anyway. ;-) + + +1. RCU OVERVIEW + +The basic idea behind RCU is to split updates into "removal" and +"reclamation" phases. The removal phase removes references to data items +within a data structure (possibly by replacing them with references to +new versions of these data items), and can run concurrently with readers. +The reason that it is safe to run the removal phase concurrently with +readers is the semantics of modern CPUs guarantee that readers will see +either the old or the new version of the data structure rather than a +partially updated reference. The reclamation phase does the work of reclaiming +(e.g., freeing) the data items removed from the data structure during the +removal phase. Because reclaiming data items can disrupt any readers +concurrently referencing those data items, the reclamation phase must +not start until readers no longer hold references to those data items. + +Splitting the update into removal and reclamation phases permits the +updater to perform the removal phase immediately, and to defer the +reclamation phase until all readers active during the removal phase have +completed, either by blocking until they finish or by registering a +callback that is invoked after they finish. Only readers that are active +during the removal phase need be considered, because any reader starting +after the removal phase will be unable to gain a reference to the removed +data items, and therefore cannot be disrupted by the reclamation phase. + +So the typical RCU update sequence goes something like the following: + +a. Remove pointers to a data structure, so that subsequent + readers cannot gain a reference to it. + +b. Wait for all previous readers to complete their RCU read-side + critical sections. + +c. At this point, there cannot be any readers who hold references + to the data structure, so it now may safely be reclaimed + (e.g., kfree()d). + +Step (b) above is the key idea underlying RCU's deferred destruction. +The ability to wait until all readers are done allows RCU readers to +use much lighter-weight synchronization, in some cases, absolutely no +synchronization at all. In contrast, in more conventional lock-based +schemes, readers must use heavy-weight synchronization in order to +prevent an updater from deleting the data structure out from under them. +This is because lock-based updaters typically update data items in place, +and must therefore exclude readers. In contrast, RCU-based updaters +typically take advantage of the fact that writes to single aligned +pointers are atomic on modern CPUs, allowing atomic insertion, removal, +and replacement of data items in a linked structure without disrupting +readers. Concurrent RCU readers can then continue accessing the old +versions, and can dispense with the atomic operations, memory barriers, +and communications cache misses that are so expensive on present-day +SMP computer systems, even in absence of lock contention. + +In the three-step procedure shown above, the updater is performing both +the removal and the reclamation step, but it is often helpful for an +entirely different thread to do the reclamation, as is in fact the case +in the Linux kernel's directory-entry cache (dcache). Even if the same +thread performs both the update step (step (a) above) and the reclamation +step (step (c) above), it is often helpful to think of them separately. +For example, RCU readers and updaters need not communicate at all, +but RCU provides implicit low-overhead communication between readers +and reclaimers, namely, in step (b) above. + +So how the heck can a reclaimer tell when a reader is done, given +that readers are not doing any sort of synchronization operations??? +Read on to learn about how RCU's API makes this easy. + + +2. WHAT IS RCU'S CORE API? + +The core RCU API is quite small: + +a. rcu_read_lock() +b. rcu_read_unlock() +c. synchronize_rcu() / call_rcu() +d. rcu_assign_pointer() +e. rcu_dereference() + +There are many other members of the RCU API, but the rest can be +expressed in terms of these five, though most implementations instead +express synchronize_rcu() in terms of the call_rcu() callback API. + +The five core RCU APIs are described below, the other 18 will be enumerated +later. See the kernel docbook documentation for more info, or look directly +at the function header comments. + +rcu_read_lock() + + void rcu_read_lock(void); + + Used by a reader to inform the reclaimer that the reader is + entering an RCU read-side critical section. It is illegal + to block while in an RCU read-side critical section, though + kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side + critical sections. Any RCU-protected data structure accessed + during an RCU read-side critical section is guaranteed to remain + unreclaimed for the full duration of that critical section. + Reference counts may be used in conjunction with RCU to maintain + longer-term references to data structures. + +rcu_read_unlock() + + void rcu_read_unlock(void); + + Used by a reader to inform the reclaimer that the reader is + exiting an RCU read-side critical section. Note that RCU + read-side critical sections may be nested and/or overlapping. + +synchronize_rcu() + + void synchronize_rcu(void); + + Marks the end of updater code and the beginning of reclaimer + code. It does this by blocking until all pre-existing RCU + read-side critical sections on all CPUs have completed. + Note that synchronize_rcu() will -not- necessarily wait for + any subsequent RCU read-side critical sections to complete. + For example, consider the following sequence of events: + + CPU 0 CPU 1 CPU 2 + ----------------- ------------------------- --------------- + 1. rcu_read_lock() + 2. enters synchronize_rcu() + 3. rcu_read_lock() + 4. rcu_read_unlock() + 5. exits synchronize_rcu() + 6. rcu_read_unlock() + + To reiterate, synchronize_rcu() waits only for ongoing RCU + read-side critical sections to complete, not necessarily for + any that begin after synchronize_rcu() is invoked. + + Of course, synchronize_rcu() does not necessarily return + -immediately- after the last pre-existing RCU read-side critical + section completes. For one thing, there might well be scheduling + delays. For another thing, many RCU implementations process + requests in batches in order to improve efficiencies, which can + further delay synchronize_rcu(). + + Since synchronize_rcu() is the API that must figure out when + readers are done, its implementation is key to RCU. For RCU + to be useful in all but the most read-intensive situations, + synchronize_rcu()'s overhead must also be quite small. + + The call_rcu() API is a callback form of synchronize_rcu(), + and is described in more detail in a later section. Instead of + blocking, it registers a function and argument which are invoked + after all ongoing RCU read-side critical sections have completed. + This callback variant is particularly useful in situations where + it is illegal to block. + +rcu_assign_pointer() + + typeof(p) rcu_assign_pointer(p, typeof(p) v); + + Yes, rcu_assign_pointer() -is- implemented as a macro, though it + would be cool to be able to declare a function in this manner. + (Compiler experts will no doubt disagree.) + + The updater uses this function to assign a new value to an + RCU-protected pointer, in order to safely communicate the change + in value from the updater to the reader. This function returns + the new value, and also executes any memory-barrier instructions + required for a given CPU architecture. + + Perhaps more important, it serves to document which pointers + are protected by RCU. That said, rcu_assign_pointer() is most + frequently used indirectly, via the _rcu list-manipulation + primitives such as list_add_rcu(). + +rcu_dereference() + + typeof(p) rcu_dereference(p); + + Like rcu_assign_pointer(), rcu_dereference() must be implemented + as a macro. + + The reader uses rcu_dereference() to fetch an RCU-protected + pointer, which returns a value that may then be safely + dereferenced. Note that rcu_deference() does not actually + dereference the pointer, instead, it protects the pointer for + later dereferencing. It also executes any needed memory-barrier + instructions for a given CPU architecture. Currently, only Alpha + needs memory barriers within rcu_dereference() -- on other CPUs, + it compiles to nothing, not even a compiler directive. + + Common coding practice uses rcu_dereference() to copy an + RCU-protected pointer to a local variable, then dereferences + this local variable, for example as follows: + + p = rcu_dereference(head.next); + return p->data; + + However, in this case, one could just as easily combine these + into one statement: + + return rcu_dereference(head.next)->data; + + If you are going to be fetching multiple fields from the + RCU-protected structure, using the local variable is of + course preferred. Repeated rcu_dereference() calls look + ugly and incur unnecessary overhead on Alpha CPUs. + + Note that the value returned by rcu_dereference() is valid + only within the enclosing RCU read-side critical section. + For example, the following is -not- legal: + + rcu_read_lock(); + p = rcu_dereference(head.next); + rcu_read_unlock(); + x = p->address; + rcu_read_lock(); + y = p->data; + rcu_read_unlock(); + + Holding a reference from one RCU read-side critical section + to another is just as illegal as holding a reference from + one lock-based critical section to another! Similarly, + using a reference outside of the critical section in which + it was acquired is just as illegal as doing so with normal + locking. + + As with rcu_assign_pointer(), an important function of + rcu_dereference() is to document which pointers are protected + by RCU. And, again like rcu_assign_pointer(), rcu_dereference() + is typically used indirectly, via the _rcu list-manipulation + primitives, such as list_for_each_entry_rcu(). + +The following diagram shows how each API communicates among the +reader, updater, and reclaimer. + + + rcu_assign_pointer() + +--------+ + +---------------------->| reader |---------+ + | +--------+ | + | | | + | | | Protect: + | | | rcu_read_lock() + | | | rcu_read_unlock() + | rcu_dereference() | | + +---------+ | | + | updater |<---------------------+ | + +---------+ V + | +-----------+ + +----------------------------------->| reclaimer | + +-----------+ + Defer: + synchronize_rcu() & call_rcu() + + +The RCU infrastructure observes the time sequence of rcu_read_lock(), +rcu_read_unlock(), synchronize_rcu(), and call_rcu() invocations in +order to determine when (1) synchronize_rcu() invocations may return +to their callers and (2) call_rcu() callbacks may be invoked. Efficient +implementations of the RCU infrastructure make heavy use of batching in +order to amortize their overhead over many uses of the corresponding APIs. + +There are no fewer than three RCU mechanisms in the Linux kernel; the +diagram above shows the first one, which is by far the most commonly used. +The rcu_dereference() and rcu_assign_pointer() primitives are used for +all three mechanisms, but different defer and protect primitives are +used as follows: + + Defer Protect + +a. synchronize_rcu() rcu_read_lock() / rcu_read_unlock() + call_rcu() + +b. call_rcu_bh() rcu_read_lock_bh() / rcu_read_unlock_bh() + +c. synchronize_sched() preempt_disable() / preempt_enable() + local_irq_save() / local_irq_restore() + hardirq enter / hardirq exit + NMI enter / NMI exit + +These three mechanisms are used as follows: + +a. RCU applied to normal data structures. + +b. RCU applied to networking data structures that may be subjected + to remote denial-of-service attacks. + +c. RCU applied to scheduler and interrupt/NMI-handler tasks. + +Again, most uses will be of (a). The (b) and (c) cases are important +for specialized uses, but are relatively uncommon. + + +3. WHAT ARE SOME EXAMPLE USES OF CORE RCU API? + +This section shows a simple use of the core RCU API to protect a +global pointer to a dynamically allocated structure. More typical +uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt. + + struct foo { + int a; + char b; + long c; + }; + DEFINE_SPINLOCK(foo_mutex); + + struct foo *gbl_foo; + + /* + * Create a new struct foo that is the same as the one currently + * pointed to by gbl_foo, except that field "a" is replaced + * with "new_a". Points gbl_foo to the new structure, and + * frees up the old structure after a grace period. + * + * Uses rcu_assign_pointer() to ensure that concurrent readers + * see the initialized version of the new structure. + * + * Uses synchronize_rcu() to ensure that any readers that might + * have references to the old structure complete before freeing + * the old structure. + */ + void foo_update_a(int new_a) + { + struct foo *new_fp; + struct foo *old_fp; + + new_fp = kmalloc(sizeof(*fp), GFP_KERNEL); + spin_lock(&foo_mutex); + old_fp = gbl_foo; + *new_fp = *old_fp; + new_fp->a = new_a; + rcu_assign_pointer(gbl_foo, new_fp); + spin_unlock(&foo_mutex); + synchronize_rcu(); + kfree(old_fp); + } + + /* + * Return the value of field "a" of the current gbl_foo + * structure. Use rcu_read_lock() and rcu_read_unlock() + * to ensure that the structure does not get deleted out + * from under us, and use rcu_dereference() to ensure that + * we see the initialized version of the structure (important + * for DEC Alpha and for people reading the code). + */ + int foo_get_a(void) + { + int retval; + + rcu_read_lock(); + retval = rcu_dereference(gbl_foo)->a; + rcu_read_unlock(); + return retval; + } + +So, to sum up: + +o Use rcu_read_lock() and rcu_read_unlock() to guard RCU + read-side critical sections. + +o Within an RCU read-side critical section, use rcu_dereference() + to dereference RCU-protected pointers. + +o Use some solid scheme (such as locks or semaphores) to + keep concurrent updates from interfering with each other. + +o Use rcu_assign_pointer() to update an RCU-protected pointer. + This primitive protects concurrent readers from the updater, + -not- concurrent updates from each other! You therefore still + need to use locking (or something similar) to keep concurrent + rcu_assign_pointer() primitives from interfering with each other. + +o Use synchronize_rcu() -after- removing a data element from an + RCU-protected data structure, but -before- reclaiming/freeing + the data element, in order to wait for the completion of all + RCU read-side critical sections that might be referencing that + data item. + +See checklist.txt for additional rules to follow when using RCU. + + +4. WHAT IF MY UPDATING THREAD CANNOT BLOCK? + +In the example above, foo_update_a() blocks until a grace period elapses. +This is quite simple, but in some cases one cannot afford to wait so +long -- there might be other high-priority work to be done. + +In such cases, one uses call_rcu() rather than synchronize_rcu(). +The call_rcu() API is as follows: + + void call_rcu(struct rcu_head * head, + void (*func)(struct rcu_head *head)); + +This function invokes func(head) after a grace period has elapsed. +This invocation might happen from either softirq or process context, +so the function is not permitted to block. The foo struct needs to +have an rcu_head structure added, perhaps as follows: + + struct foo { + int a; + char b; + long c; + struct rcu_head rcu; + }; + +The foo_update_a() function might then be written as follows: + + /* + * Create a new struct foo that is the same as the one currently + * pointed to by gbl_foo, except that field "a" is replaced + * with "new_a". Points gbl_foo to the new structure, and + * frees up the old structure after a grace period. + * + * Uses rcu_assign_pointer() to ensure that concurrent readers + * see the initialized version of the new structure. + * + * Uses call_rcu() to ensure that any readers that might have + * references to the old structure complete before freeing the + * old structure. + */ + void foo_update_a(int new_a) + { + struct foo *new_fp; + struct foo *old_fp; + + new_fp = kmalloc(sizeof(*fp), GFP_KERNEL); + spin_lock(&foo_mutex); + old_fp = gbl_foo; + *new_fp = *old_fp; + new_fp->a = new_a; + rcu_assign_pointer(gbl_foo, new_fp); + spin_unlock(&foo_mutex); + call_rcu(&old_fp->rcu, foo_reclaim); + } + +The foo_reclaim() function might appear as follows: + + void foo_reclaim(struct rcu_head *rp) + { + struct foo *fp = container_of(rp, struct foo, rcu); + + kfree(fp); + } + +The container_of() primitive is a macro that, given a pointer into a +struct, the type of the struct, and the pointed-to field within the +struct, returns a pointer to the beginning of the struct. + +The use of call_rcu() permits the caller of foo_update_a() to +immediately regain control, without needing to worry further about the +old version of the newly updated element. It also clearly shows the +RCU distinction between updater, namely foo_update_a(), and reclaimer, +namely foo_reclaim(). + +The summary of advice is the same as for the previous section, except +that we are now using call_rcu() rather than synchronize_rcu(): + +o Use call_rcu() -after- removing a data element from an + RCU-protected data structure in order to register a callback + function that will be invoked after the completion of all RCU + read-side critical sections that might be referencing that + data item. + +Again, see checklist.txt for additional rules governing the use of RCU. + + +5. WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU? + +One of the nice things about RCU is that it has extremely simple "toy" +implementations that are a good first step towards understanding the +production-quality implementations in the Linux kernel. This section +presents two such "toy" implementations of RCU, one that is implemented +in terms of familiar locking primitives, and another that more closely +resembles "classic" RCU. Both are way too simple for real-world use, +lacking both functionality and performance. However, they are useful +in getting a feel for how RCU works. See kernel/rcupdate.c for a +production-quality implementation, and see: + + http://www.rdrop.com/users/paulmck/RCU + +for papers describing the Linux kernel RCU implementation. The OLS'01 +and OLS'02 papers are a good introduction, and the dissertation provides +more details on the current implementation. + + +5A. "TOY" IMPLEMENTATION #1: LOCKING + +This section presents a "toy" RCU implementation that is based on +familiar locking primitives. Its overhead makes it a non-starter for +real-life use, as does its lack of scalability. It is also unsuitable +for realtime use, since it allows scheduling latency to "bleed" from +one read-side critical section to another. + +However, it is probably the easiest implementation to relate to, so is +a good starting point. + +It is extremely simple: + + static DEFINE_RWLOCK(rcu_gp_mutex); + + void rcu_read_lock(void) + { + read_lock(&rcu_gp_mutex); + } + + void rcu_read_unlock(void) + { + read_unlock(&rcu_gp_mutex); + } + + void synchronize_rcu(void) + { + write_lock(&rcu_gp_mutex); + write_unlock(&rcu_gp_mutex); + } + +[You can ignore rcu_assign_pointer() and rcu_dereference() without +missing much. But here they are anyway. And whatever you do, don't +forget about them when submitting patches making use of RCU!] + + #define rcu_assign_pointer(p, v) ({ \ + smp_wmb(); \ + (p) = (v); \ + }) + + #define rcu_dereference(p) ({ \ + typeof(p) _________p1 = p; \ + smp_read_barrier_depends(); \ + (_________p1); \ + }) + + +The rcu_read_lock() and rcu_read_unlock() primitive read-acquire +and release a global reader-writer lock. The synchronize_rcu() +primitive write-acquires this same lock, then immediately releases +it. This means that once synchronize_rcu() exits, all RCU read-side +critical sections that were in progress before synchonize_rcu() was +called are guaranteed to have completed -- there is no way that +synchronize_rcu() would have been able to write-acquire the lock +otherwise. + +It is possible to nest rcu_read_lock(), since reader-writer locks may +be recursively acquired. Note also that rcu_read_lock() is immune +from deadlock (an important property of RCU). The reason for this is +that the only thing that can block rcu_read_lock() is a synchronize_rcu(). +But synchronize_rcu() does not acquire any locks while holding rcu_gp_mutex, +so there can be no deadlock cycle. + +Quick Quiz #1: Why is this argument naive? How could a deadlock + occur when using this algorithm in a real-world Linux + kernel? How could this deadlock be avoided? + + +5B. "TOY" EXAMPLE #2: CLASSIC RCU + +This section presents a "toy" RCU implementation that is based on +"classic RCU". It is also short on performance (but only for updates) and +on features such as hotplug CPU and the ability to run in CONFIG_PREEMPT +kernels. The definitions of rcu_dereference() and rcu_assign_pointer() +are the same as those shown in the preceding section, so they are omitted. + + void rcu_read_lock(void) { } + + void rcu_read_unlock(void) { } + + void synchronize_rcu(void) + { + int cpu; + + for_each_cpu(cpu) + run_on(cpu); + } + +Note that rcu_read_lock() and rcu_read_unlock() do absolutely nothing. +This is the great strength of classic RCU in a non-preemptive kernel: +read-side overhead is precisely zero, at least on non-Alpha CPUs. +And there is absolutely no way that rcu_read_lock() can possibly +participate in a deadlock cycle! + +The implementation of synchronize_rcu() simply schedules itself on each +CPU in turn. The run_on() primitive can be implemented straightforwardly +in terms of the sched_setaffinity() primitive. Of course, a somewhat less +"toy" implementation would restore the affinity upon completion rather +than just leaving all tasks running on the last CPU, but when I said +"toy", I meant -toy-! + +So how the heck is this supposed to work??? + +Remember that it is illegal to block while in an RCU read-side critical +section. Therefore, if a given CPU executes a context switch, we know +that it must have completed all preceding RCU read-side critical sections. +Once -all- CPUs have executed a context switch, then -all- preceding +RCU read-side critical sections will have completed. + +So, suppose that we remove a data item from its structure and then invoke +synchronize_rcu(). Once synchronize_rcu() returns, we are guaranteed +that there are no RCU read-side critical sections holding a reference +to that data item, so we can safely reclaim it. + +Quick Quiz #2: Give an example where Classic RCU's read-side + overhead is -negative-. + +Quick Quiz #3: If it is illegal to block in an RCU read-side + critical section, what the heck do you do in + PREEMPT_RT, where normal spinlocks can block??? + + +6. ANALOGY WITH READER-WRITER LOCKING + +Although RCU can be used in many different ways, a very common use of +RCU is analogous to reader-writer locking. The following unified +diff shows how closely related RCU and reader-writer locking can be. + + @@ -13,15 +14,15 @@ + struct list_head *lp; + struct el *p; + + - read_lock(); + - list_for_each_entry(p, head, lp) { + + rcu_read_lock(); + + list_for_each_entry_rcu(p, head, lp) { + if (p->key == key) { + *result = p->data; + - read_unlock(); + + rcu_read_unlock(); + return 1; + } + } + - read_unlock(); + + rcu_read_unlock(); + return 0; + } + + @@ -29,15 +30,16 @@ + { + struct el *p; + + - write_lock(&listmutex); + + spin_lock(&listmutex); + list_for_each_entry(p, head, lp) { + if (p->key == key) { + list_del(&p->list); + - write_unlock(&listmutex); + + spin_unlock(&listmutex); + + synchronize_rcu(); + kfree(p); + return 1; + } + } + - write_unlock(&listmutex); + + spin_unlock(&listmutex); + return 0; + } + +Or, for those who prefer a side-by-side listing: + + 1 struct el { 1 struct el { + 2 struct list_head list; 2 struct list_head list; + 3 long key; 3 long key; + 4 spinlock_t mutex; 4 spinlock_t mutex; + 5 int data; 5 int data; + 6 /* Other data fields */ 6 /* Other data fields */ + 7 }; 7 }; + 8 spinlock_t listmutex; 8 spinlock_t listmutex; + 9 struct el head; 9 struct el head; + + 1 int search(long key, int *result) 1 int search(long key, int *result) + 2 { 2 { + 3 struct list_head *lp; 3 struct list_head *lp; + 4 struct el *p; 4 struct el *p; + 5 5 + 6 read_lock(); 6 rcu_read_lock(); + 7 list_for_each_entry(p, head, lp) { 7 list_for_each_entry_rcu(p, head, lp) { + 8 if (p->key == key) { 8 if (p->key == key) { + 9 *result = p->data; 9 *result = p->data; +10 read_unlock(); 10 rcu_read_unlock(); +11 return 1; 11 return 1; +12 } 12 } +13 } 13 } +14 read_unlock(); 14 rcu_read_unlock(); +15 return 0; 15 return 0; +16 } 16 } + + 1 int delete(long key) 1 int delete(long key) + 2 { 2 { + 3 struct el *p; 3 struct el *p; + 4 4 + 5 write_lock(&listmutex); 5 spin_lock(&listmutex); + 6 list_for_each_entry(p, head, lp) { 6 list_for_each_entry(p, head, lp) { + 7 if (p->key == key) { 7 if (p->key == key) { + 8 list_del(&p->list); 8 list_del(&p->list); + 9 write_unlock(&listmutex); 9 spin_unlock(&listmutex); + 10 synchronize_rcu(); +10 kfree(p); 11 kfree(p); +11 return 1; 12 return 1; +12 } 13 } +13 } 14 } +14 write_unlock(&listmutex); 15 spin_unlock(&listmutex); +15 return 0; 16 return 0; +16 } 17 } + +Either way, the differences are quite small. Read-side locking moves +to rcu_read_lock() and rcu_read_unlock, update-side locking moves from +from a reader-writer lock to a simple spinlock, and a synchronize_rcu() +precedes the kfree(). + +However, there is one potential catch: the read-side and update-side +critical sections can now run concurrently. In many cases, this will +not be a problem, but it is necessary to check carefully regardless. +For example, if multiple independent list updates must be seen as +a single atomic update, converting to RCU will require special care. + +Also, the presence of synchronize_rcu() means that the RCU version of +delete() can now block. If this is a problem, there is a callback-based +mechanism that never blocks, namely call_rcu(), that can be used in +place of synchronize_rcu(). + + +7. FULL LIST OF RCU APIs + +The RCU APIs are documented in docbook-format header comments in the +Linux-kernel source code, but it helps to have a full list of the +APIs, since there does not appear to be a way to categorize them +in docbook. Here is the list, by category. + +Markers for RCU read-side critical sections: + + rcu_read_lock + rcu_read_unlock + rcu_read_lock_bh + rcu_read_unlock_bh + +RCU pointer/list traversal: + + rcu_dereference + list_for_each_rcu (to be deprecated in favor of + list_for_each_entry_rcu) + list_for_each_safe_rcu (deprecated, not used) + list_for_each_entry_rcu + list_for_each_continue_rcu (to be deprecated in favor of new + list_for_each_entry_continue_rcu) + hlist_for_each_rcu (to be deprecated in favor of + hlist_for_each_entry_rcu) + hlist_for_each_entry_rcu + +RCU pointer update: + + rcu_assign_pointer + list_add_rcu + list_add_tail_rcu + list_del_rcu + list_replace_rcu + hlist_del_rcu + hlist_add_head_rcu + +RCU grace period: + + synchronize_kernel (deprecated) + synchronize_net + synchronize_sched + synchronize_rcu + call_rcu + call_rcu_bh + +See the comment headers in the source code (or the docbook generated +from them) for more information. + + +8. ANSWERS TO QUICK QUIZZES + +Quick Quiz #1: Why is this argument naive? How could a deadlock + occur when using this algorithm in a real-world Linux + kernel? [Referring to the lock-based "toy" RCU + algorithm.] + +Answer: Consider the following sequence of events: + + 1. CPU 0 acquires some unrelated lock, call it + "problematic_lock". + + 2. CPU 1 enters synchronize_rcu(), write-acquiring + rcu_gp_mutex. + + 3. CPU 0 enters rcu_read_lock(), but must wait + because CPU 1 holds rcu_gp_mutex. + + 4. CPU 1 is interrupted, and the irq handler + attempts to acquire problematic_lock. + + The system is now deadlocked. + + One way to avoid this deadlock is to use an approach like + that of CONFIG_PREEMPT_RT, where all normal spinlocks + become blocking locks, and all irq handlers execute in + the context of special tasks. In this case, in step 4 + above, the irq handler would block, allowing CPU 1 to + release rcu_gp_mutex, avoiding the deadlock. + + Even in the absence of deadlock, this RCU implementation + allows latency to "bleed" from readers to other + readers through synchronize_rcu(). To see this, + consider task A in an RCU read-side critical section + (thus read-holding rcu_gp_mutex), task B blocked + attempting to write-acquire rcu_gp_mutex, and + task C blocked in rcu_read_lock() attempting to + read_acquire rcu_gp_mutex. Task A's RCU read-side + latency is holding up task C, albeit indirectly via + task B. + + Realtime RCU implementations therefore use a counter-based + approach where tasks in RCU read-side critical sections + cannot be blocked by tasks executing synchronize_rcu(). + +Quick Quiz #2: Give an example where Classic RCU's read-side + overhead is -negative-. + +Answer: Imagine a single-CPU system with a non-CONFIG_PREEMPT + kernel where a routing table is used by process-context + code, but can be updated by irq-context code (for example, + by an "ICMP REDIRECT" packet). The usual way of handling + this would be to have the process-context code disable + interrupts while searching the routing table. Use of + RCU allows such interrupt-disabling to be dispensed with. + Thus, without RCU, you pay the cost of disabling interrupts, + and with RCU you don't. + + One can argue that the overhead of RCU in this + case is negative with respect to the single-CPU + interrupt-disabling approach. Others might argue that + the overhead of RCU is merely zero, and that replacing + the positive overhead of the interrupt-disabling scheme + with the zero-overhead RCU scheme does not constitute + negative overhead. + + In real life, of course, things are more complex. But + even the theoretical possibility of negative overhead for + a synchronization primitive is a bit unexpected. ;-) + +Quick Quiz #3: If it is illegal to block in an RCU read-side + critical section, what the heck do you do in + PREEMPT_RT, where normal spinlocks can block??? + +Answer: Just as PREEMPT_RT permits preemption of spinlock + critical sections, it permits preemption of RCU + read-side critical sections. It also permits + spinlocks blocking while in RCU read-side critical + sections. + + Why the apparent inconsistency? Because it is it + possible to use priority boosting to keep the RCU + grace periods short if need be (for example, if running + short of memory). In contrast, if blocking waiting + for (say) network reception, there is no way to know + what should be boosted. Especially given that the + process we need to boost might well be a human being + who just went out for a pizza or something. And although + a computer-operated cattle prod might arouse serious + interest, it might also provoke serious objections. + Besides, how does the computer know what pizza parlor + the human being went to??? + + +ACKNOWLEDGEMENTS + +My thanks to the people who helped make this human-readable, including +Jon Walpole, Josh Triplett, Serge Hallyn, and Suzanne Wood. + + +For more information, see http://www.rdrop.com/users/paulmck/RCU. diff --git a/trunk/Documentation/SubmittingPatches b/trunk/Documentation/SubmittingPatches index 7f43b040311e..237d54c44bc5 100644 --- a/trunk/Documentation/SubmittingPatches +++ b/trunk/Documentation/SubmittingPatches @@ -301,8 +301,84 @@ now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. +12) The canonical patch format -12) More references for submitting patches +The canonical patch subject line is: + + Subject: [PATCH 001/123] subsystem: summary phrase + +The canonical patch message body contains the following: + + - A "from" line specifying the patch author. + + - An empty line. + + - The body of the explanation, which will be copied to the + permanent changelog to describe this patch. + + - The "Signed-off-by:" lines, described above, which will + also go in the changelog. + + - A marker line containing simply "---". + + - Any additional comments not suitable for the changelog. + + - The actual patch (diff output). + +The Subject line format makes it very easy to sort the emails +alphabetically by subject line - pretty much any email reader will +support that - since because the sequence number is zero-padded, +the numerical and alphabetic sort is the same. + +The "subsystem" in the email's Subject should identify which +area or subsystem of the kernel is being patched. + +The "summary phrase" in the email's Subject should concisely +describe the patch which that email contains. The "summary +phrase" should not be a filename. Do not use the same "summary +phrase" for every patch in a whole patch series. + +Bear in mind that the "summary phrase" of your email becomes +a globally-unique identifier for that patch. It propagates +all the way into the git changelog. The "summary phrase" may +later be used in developer discussions which refer to the patch. +People will want to google for the "summary phrase" to read +discussion regarding that patch. + +A couple of example Subjects: + + Subject: [patch 2/5] ext2: improve scalability of bitmap searching + Subject: [PATCHv2 001/207] x86: fix eflags tracking + +The "from" line must be the very first line in the message body, +and has the form: + + From: Original Author + +The "from" line specifies who will be credited as the author of the +patch in the permanent changelog. If the "from" line is missing, +then the "From:" line from the email header will be used to determine +the patch author in the changelog. + +The explanation body will be committed to the permanent source +changelog, so should make sense to a competent reader who has long +since forgotten the immediate details of the discussion that might +have led to this patch. + +The "---" marker line serves the essential purpose of marking for patch +handling tools where the changelog message ends. + +One good use for the additional comments after the "---" marker is for +a diffstat, to show what files have changed, and the number of inserted +and deleted lines per file. A diffstat is especially useful on bigger +patches. Other comments relevant only to the moment or the maintainer, +not suitable for the permanent changelog, should also go here. + +See more details on the proper patch format in the following +references. + + +13) More references for submitting patches Andrew Morton, "The perfect patch" (tpp). @@ -310,6 +386,14 @@ Andrew Morton, "The perfect patch" (tpp). Jeff Garzik, "Linux kernel patch submission format." +Greg KH, "How to piss off a kernel subsystem maintainer" + + +Kernel Documentation/CodingStyle + + +Linus Torvald's mail on the canonical patch format: + ----------------------------------- diff --git a/trunk/Documentation/acpi-hotkey.txt b/trunk/Documentation/acpi-hotkey.txt index 0acdc80c30c2..744f1aec6553 100644 --- a/trunk/Documentation/acpi-hotkey.txt +++ b/trunk/Documentation/acpi-hotkey.txt @@ -35,4 +35,4 @@ created. Please use command "cat /proc/acpi/hotkey/polling_method" to retrieve it. Note: Use cmdline "acpi_generic_hotkey" to over-ride -loading any platform specific drivers. +platform-specific with generic driver. diff --git a/trunk/Documentation/aoe/mkshelf.sh b/trunk/Documentation/aoe/mkshelf.sh index 8bacf9f2c7cc..32615814271c 100644 --- a/trunk/Documentation/aoe/mkshelf.sh +++ b/trunk/Documentation/aoe/mkshelf.sh @@ -8,13 +8,15 @@ fi n_partitions=${n_partitions:-16} dir=$1 shelf=$2 +nslots=16 +maxslot=`echo $nslots 1 - p | dc` MAJOR=152 set -e -minor=`echo 10 \* $shelf \* $n_partitions | bc` +minor=`echo $nslots \* $shelf \* $n_partitions | bc` endp=`echo $n_partitions - 1 | bc` -for slot in `seq 0 9`; do +for slot in `seq 0 $maxslot`; do for part in `seq 0 $endp`; do name=e$shelf.$slot test "$part" != "0" && name=${name}p$part diff --git a/trunk/Documentation/applying-patches.txt b/trunk/Documentation/applying-patches.txt new file mode 100644 index 000000000000..681e426e2482 --- /dev/null +++ b/trunk/Documentation/applying-patches.txt @@ -0,0 +1,439 @@ + + Applying Patches To The Linux Kernel + ------------------------------------ + + (Written by Jesper Juhl, August 2005) + + + +A frequently asked question on the Linux Kernel Mailing List is how to apply +a patch to the kernel or, more specifically, what base kernel a patch for +one of the many trees/branches should be applied to. Hopefully this document +will explain this to you. + +In addition to explaining how to apply and revert patches, a brief +description of the different kernel trees (and examples of how to apply +their specific patches) is also provided. + + +What is a patch? +--- + A patch is a small text document containing a delta of changes between two +different versions of a source tree. Patches are created with the `diff' +program. +To correctly apply a patch you need to know what base it was generated from +and what new version the patch will change the source tree into. These +should both be present in the patch file metadata or be possible to deduce +from the filename. + + +How do I apply or revert a patch? +--- + You apply a patch with the `patch' program. The patch program reads a diff +(or patch) file and makes the changes to the source tree described in it. + +Patches for the Linux kernel are generated relative to the parent directory +holding the kernel source dir. + +This means that paths to files inside the patch file contain the name of the +kernel source directories it was generated against (or some other directory +names like "a/" and "b/"). +Since this is unlikely to match the name of the kernel source dir on your +local machine (but is often useful info to see what version an otherwise +unlabeled patch was generated against) you should change into your kernel +source directory and then strip the first element of the path from filenames +in the patch file when applying it (the -p1 argument to `patch' does this). + +To revert a previously applied patch, use the -R argument to patch. +So, if you applied a patch like this: + patch -p1 < ../patch-x.y.z + +You can revert (undo) it like this: + patch -R -p1 < ../patch-x.y.z + + +How do I feed a patch/diff file to `patch'? +--- + This (as usual with Linux and other UNIX like operating systems) can be +done in several different ways. +In all the examples below I feed the file (in uncompressed form) to patch +via stdin using the following syntax: + patch -p1 < path/to/patch-x.y.z + +If you just want to be able to follow the examples below and don't want to +know of more than one way to use patch, then you can stop reading this +section here. + +Patch can also get the name of the file to use via the -i argument, like +this: + patch -p1 -i path/to/patch-x.y.z + +If your patch file is compressed with gzip or bzip2 and you don't want to +uncompress it before applying it, then you can feed it to patch like this +instead: + zcat path/to/patch-x.y.z.gz | patch -p1 + bzcat path/to/patch-x.y.z.bz2 | patch -p1 + +If you wish to uncompress the patch file by hand first before applying it +(what I assume you've done in the examples below), then you simply run +gunzip or bunzip2 on the file - like this: + gunzip patch-x.y.z.gz + bunzip2 patch-x.y.z.bz2 + +Which will leave you with a plain text patch-x.y.z file that you can feed to +patch via stdin or the -i argument, as you prefer. + +A few other nice arguments for patch are -s which causes patch to be silent +except for errors which is nice to prevent errors from scrolling out of the +screen too fast, and --dry-run which causes patch to just print a listing of +what would happen, but doesn't actually make any changes. Finally --verbose +tells patch to print more information about the work being done. + + +Common errors when patching +--- + When patch applies a patch file it attempts to verify the sanity of the +file in different ways. +Checking that the file looks like a valid patch file, checking the code +around the bits being modified matches the context provided in the patch are +just two of the basic sanity checks patch does. + +If patch encounters something that doesn't look quite right it has two +options. It can either refuse to apply the changes and abort or it can try +to find a way to make the patch apply with a few minor changes. + +One example of something that's not 'quite right' that patch will attempt to +fix up is if all the context matches, the lines being changed match, but the +line numbers are different. This can happen, for example, if the patch makes +a change in the middle of the file but for some reasons a few lines have +been added or removed near the beginning of the file. In that case +everything looks good it has just moved up or down a bit, and patch will +usually adjust the line numbers and apply the patch. + +Whenever patch applies a patch that it had to modify a bit to make it fit +it'll tell you about it by saying the patch applied with 'fuzz'. +You should be wary of such changes since even though patch probably got it +right it doesn't /always/ get it right, and the result will sometimes be +wrong. + +When patch encounters a change that it can't fix up with fuzz it rejects it +outright and leaves a file with a .rej extension (a reject file). You can +read this file to see exactely what change couldn't be applied, so you can +go fix it up by hand if you wish. + +If you don't have any third party patches applied to your kernel source, but +only patches from kernel.org and you apply the patches in the correct order, +and have made no modifications yourself to the source files, then you should +never see a fuzz or reject message from patch. If you do see such messages +anyway, then there's a high risk that either your local source tree or the +patch file is corrupted in some way. In that case you should probably try +redownloading the patch and if things are still not OK then you'd be advised +to start with a fresh tree downloaded in full from kernel.org. + +Let's look a bit more at some of the messages patch can produce. + +If patch stops and presents a "File to patch:" prompt, then patch could not +find a file to be patched. Most likely you forgot to specify -p1 or you are +in the wrong directory. Less often, you'll find patches that need to be +applied with -p0 instead of -p1 (reading the patch file should reveal if +this is the case - if so, then this is an error by the person who created +the patch but is not fatal). + +If you get "Hunk #2 succeeded at 1887 with fuzz 2 (offset 7 lines)." or a +message similar to that, then it means that patch had to adjust the location +of the change (in this example it needed to move 7 lines from where it +expected to make the change to make it fit). +The resulting file may or may not be OK, depending on the reason the file +was different than expected. +This often happens if you try to apply a patch that was generated against a +different kernel version than the one you are trying to patch. + +If you get a message like "Hunk #3 FAILED at 2387.", then it means that the +patch could not be applied correctly and the patch program was unable to +fuzz its way through. This will generate a .rej file with the change that +caused the patch to fail and also a .orig file showing you the original +content that couldn't be changed. + +If you get "Reversed (or previously applied) patch detected! Assume -R? [n]" +then patch detected that the change contained in the patch seems to have +already been made. +If you actually did apply this patch previously and you just re-applied it +in error, then just say [n]o and abort this patch. If you applied this patch +previously and actually intended to revert it, but forgot to specify -R, +then you can say [y]es here to make patch revert it for you. +This can also happen if the creator of the patch reversed the source and +destination directories when creating the patch, and in that case reverting +the patch will in fact apply it. + +A message similar to "patch: **** unexpected end of file in patch" or "patch +unexpectedly ends in middle of line" means that patch could make no sense of +the file you fed to it. Either your download is broken or you tried to feed +patch a compressed patch file without uncompressing it first. + +As I already mentioned above, these errors should never happen if you apply +a patch from kernel.org to the correct version of an unmodified source tree. +So if you get these errors with kernel.org patches then you should probably +assume that either your patch file or your tree is broken and I'd advice you +to start over with a fresh download of a full kernel tree and the patch you +wish to apply. + + +Are there any alternatives to `patch'? +--- + Yes there are alternatives. You can use the `interdiff' program +(http://cyberelk.net/tim/patchutils/) to generate a patch representing the +differences between two patches and then apply the result. +This will let you move from something like 2.6.12.2 to 2.6.12.3 in a single +step. The -z flag to interdiff will even let you feed it patches in gzip or +bzip2 compressed form directly without the use of zcat or bzcat or manual +decompression. + +Here's how you'd go from 2.6.12.2 to 2.6.12.3 in a single step: + interdiff -z ../patch-2.6.12.2.bz2 ../patch-2.6.12.3.gz | patch -p1 + +Although interdiff may save you a step or two you are generally advised to +do the additional steps since interdiff can get things wrong in some cases. + + Another alternative is `ketchup', which is a python script for automatic +downloading and applying of patches (http://www.selenic.com/ketchup/). + +Other nice tools are diffstat which shows a summary of changes made by a +patch, lsdiff which displays a short listing of affected files in a patch +file, along with (optionally) the line numbers of the start of each patch +and grepdiff which displays a list of the files modified by a patch where +the patch contains a given regular expression. + + +Where can I download the patches? +--- + The patches are available at http://kernel.org/ +Most recent patches are linked from the front page, but they also have +specific homes. + +The 2.6.x.y (-stable) and 2.6.x patches live at + ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ + +The -rc patches live at + ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing/ + +The -git patches live at + ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/ + +The -mm kernels live at + ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/ + +In place of ftp.kernel.org you can use ftp.cc.kernel.org, where cc is a +country code. This way you'll be downloading from a mirror site that's most +likely geographically closer to you, resulting in faster downloads for you, +less bandwidth used globally and less load on the main kernel.org servers - +these are good things, do use mirrors when possible. + + +The 2.6.x kernels +--- + These are the base stable releases released by Linus. The highest numbered +release is the most recent. + +If regressions or other serious flaws are found then a -stable fix patch +will be released (see below) on top of this base. Once a new 2.6.x base +kernel is released, a patch is made available that is a delta between the +previous 2.6.x kernel and the new one. + +To apply a patch moving from 2.6.11 to 2.6.12 you'd do the following (note +that such patches do *NOT* apply on top of 2.6.x.y kernels but on top of the +base 2.6.x kernel - if you need to move from 2.6.x.y to 2.6.x+1 you need to +first revert the 2.6.x.y patch). + +Here are some examples: + +# moving from 2.6.11 to 2.6.12 +$ cd ~/linux-2.6.11 # change to kernel source dir +$ patch -p1 < ../patch-2.6.12 # apply the 2.6.12 patch +$ cd .. +$ mv linux-2.6.11 linux-2.6.12 # rename source dir + +# moving from 2.6.11.1 to 2.6.12 +$ cd ~/linux-2.6.11.1 # change to kernel source dir +$ patch -p1 -R < ../patch-2.6.11.1 # revert the 2.6.11.1 patch + # source dir is now 2.6.11 +$ patch -p1 < ../patch-2.6.12 # apply new 2.6.12 patch +$ cd .. +$ mv linux-2.6.11.1 inux-2.6.12 # rename source dir + + +The 2.6.x.y kernels +--- + Kernels with 4 digit versions are -stable kernels. They contain small(ish) +critical fixes for security problems or significant regressions discovered +in a given 2.6.x kernel. + +This is the recommended branch for users who want the most recent stable +kernel and are not interested in helping test development/experimental +versions. + +If no 2.6.x.y kernel is available, then the highest numbered 2.6.x kernel is +the current stable kernel. + +These patches are not incremental, meaning that for example the 2.6.12.3 +patch does not apply on top of the 2.6.12.2 kernel source, but rather on top +of the base 2.6.12 kernel source. +So, in order to apply the 2.6.12.3 patch to your existing 2.6.12.2 kernel +source you have to first back out the 2.6.12.2 patch (so you are left with a +base 2.6.12 kernel source) and then apply the new 2.6.12.3 patch. + +Here's a small example: + +$ cd ~/linux-2.6.12.2 # change into the kernel source dir +$ patch -p1 -R < ../patch-2.6.12.2 # revert the 2.6.12.2 patch +$ patch -p1 < ../patch-2.6.12.3 # apply the new 2.6.12.3 patch +$ cd .. +$ mv linux-2.6.12.2 linux-2.6.12.3 # rename the kernel source dir + + +The -rc kernels +--- + These are release-candidate kernels. These are development kernels released +by Linus whenever he deems the current git (the kernel's source management +tool) tree to be in a reasonably sane state adequate for testing. + +These kernels are not stable and you should expect occasional breakage if +you intend to run them. This is however the most stable of the main +development branches and is also what will eventually turn into the next +stable kernel, so it is important that it be tested by as many people as +possible. + +This is a good branch to run for people who want to help out testing +development kernels but do not want to run some of the really experimental +stuff (such people should see the sections about -git and -mm kernels below). + +The -rc patches are not incremental, they apply to a base 2.6.x kernel, just +like the 2.6.x.y patches described above. The kernel version before the -rcN +suffix denotes the version of the kernel that this -rc kernel will eventually +turn into. +So, 2.6.13-rc5 means that this is the fifth release candidate for the 2.6.13 +kernel and the patch should be applied on top of the 2.6.12 kernel source. + +Here are 3 examples of how to apply these patches: + +# first an example of moving from 2.6.12 to 2.6.13-rc3 +$ cd ~/linux-2.6.12 # change into the 2.6.12 source dir +$ patch -p1 < ../patch-2.6.13-rc3 # apply the 2.6.13-rc3 patch +$ cd .. +$ mv linux-2.6.12 linux-2.6.13-rc3 # rename the source dir + +# now let's move from 2.6.13-rc3 to 2.6.13-rc5 +$ cd ~/linux-2.6.13-rc3 # change into the 2.6.13-rc3 dir +$ patch -p1 -R < ../patch-2.6.13-rc3 # revert the 2.6.13-rc3 patch +$ patch -p1 < ../patch-2.6.13-rc5 # apply the new 2.6.13-rc5 patch +$ cd .. +$ mv linux-2.6.13-rc3 linux-2.6.13-rc5 # rename the source dir + +# finally let's try and move from 2.6.12.3 to 2.6.13-rc5 +$ cd ~/linux-2.6.12.3 # change to the kernel source dir +$ patch -p1 -R < ../patch-2.6.12.3 # revert the 2.6.12.3 patch +$ patch -p1 < ../patch-2.6.13-rc5 # apply new 2.6.13-rc5 patch +$ cd .. +$ mv linux-2.6.12.3 linux-2.6.13-rc5 # rename the kernel source dir + + +The -git kernels +--- + These are daily snapshots of Linus' kernel tree (managed in a git +repository, hence the name). + +These patches are usually released daily and represent the current state of +Linus' tree. They are more experimental than -rc kernels since they are +generated automatically without even a cursory glance to see if they are +sane. + +-git patches are not incremental and apply either to a base 2.6.x kernel or +a base 2.6.x-rc kernel - you can see which from their name. +A patch named 2.6.12-git1 applies to the 2.6.12 kernel source and a patch +named 2.6.13-rc3-git2 applies to the source of the 2.6.13-rc3 kernel. + +Here are some examples of how to apply these patches: + +# moving from 2.6.12 to 2.6.12-git1 +$ cd ~/linux-2.6.12 # change to the kernel source dir +$ patch -p1 < ../patch-2.6.12-git1 # apply the 2.6.12-git1 patch +$ cd .. +$ mv linux-2.6.12 linux-2.6.12-git1 # rename the kernel source dir + +# moving from 2.6.12-git1 to 2.6.13-rc2-git3 +$ cd ~/linux-2.6.12-git1 # change to the kernel source dir +$ patch -p1 -R < ../patch-2.6.12-git1 # revert the 2.6.12-git1 patch + # we now have a 2.6.12 kernel +$ patch -p1 < ../patch-2.6.13-rc2 # apply the 2.6.13-rc2 patch + # the kernel is now 2.6.13-rc2 +$ patch -p1 < ../patch-2.6.13-rc2-git3 # apply the 2.6.13-rc2-git3 patch + # the kernel is now 2.6.13-rc2-git3 +$ cd .. +$ mv linux-2.6.12-git1 linux-2.6.13-rc2-git3 # rename source dir + + +The -mm kernels +--- + These are experimental kernels released by Andrew Morton. + +The -mm tree serves as a sort of proving ground for new features and other +experimental patches. +Once a patch has proved its worth in -mm for a while Andrew pushes it on to +Linus for inclusion in mainline. + +Although it's encouraged that patches flow to Linus via the -mm tree, this +is not always enforced. +Subsystem maintainers (or individuals) sometimes push their patches directly +to Linus, even though (or after) they have been merged and tested in -mm (or +sometimes even without prior testing in -mm). + +You should generally strive to get your patches into mainline via -mm to +ensure maximum testing. + +This branch is in constant flux and contains many experimental features, a +lot of debugging patches not appropriate for mainline etc and is the most +experimental of the branches described in this document. + +These kernels are not appropriate for use on systems that are supposed to be +stable and they are more risky to run than any of the other branches (make +sure you have up-to-date backups - that goes for any experimental kernel but +even more so for -mm kernels). + +These kernels in addition to all the other experimental patches they contain +usually also contain any changes in the mainline -git kernels available at +the time of release. + +Testing of -mm kernels is greatly appreciated since the whole point of the +tree is to weed out regressions, crashes, data corruption bugs, build +breakage (and any other bug in general) before changes are merged into the +more stable mainline Linus tree. +But testers of -mm should be aware that breakage in this tree is more common +than in any other tree. + +The -mm kernels are not released on a fixed schedule, but usually a few -mm +kernels are released in between each -rc kernel (1 to 3 is common). +The -mm kernels apply to either a base 2.6.x kernel (when no -rc kernels +have been released yet) or to a Linus -rc kernel. + +Here are some examples of applying the -mm patches: + +# moving from 2.6.12 to 2.6.12-mm1 +$ cd ~/linux-2.6.12 # change to the 2.6.12 source dir +$ patch -p1 < ../2.6.12-mm1 # apply the 2.6.12-mm1 patch +$ cd .. +$ mv linux-2.6.12 linux-2.6.12-mm1 # rename the source appropriately + +# moving from 2.6.12-mm1 to 2.6.13-rc3-mm3 +$ cd ~/linux-2.6.12-mm1 +$ patch -p1 -R < ../2.6.12-mm1 # revert the 2.6.12-mm1 patch + # we now have a 2.6.12 source +$ patch -p1 < ../patch-2.6.13-rc3 # apply the 2.6.13-rc3 patch + # we now have a 2.6.13-rc3 source +$ patch -p1 < ../2.6.13-rc3-mm3 # apply the 2.6.13-rc3-mm3 patch +$ cd .. +$ mv linux-2.6.12-mm1 linux-2.6.13-rc3-mm3 # rename the source dir + + +This concludes this list of explanations of the various kernel trees and I +hope you are now crystal clear on how to apply the various patches and help +testing the kernel. + diff --git a/trunk/Documentation/cciss.txt b/trunk/Documentation/cciss.txt index c8f9a73111da..68a711fb82cf 100644 --- a/trunk/Documentation/cciss.txt +++ b/trunk/Documentation/cciss.txt @@ -17,7 +17,9 @@ This driver is known to work with the following cards: * SA P600 * SA P800 * SA E400 - * SA E300 + * SA P400i + * SA E200 + * SA E200i If nodes are not already created in the /dev/cciss directory, run as root: diff --git a/trunk/Documentation/cdrom/sonycd535 b/trunk/Documentation/cdrom/sonycd535 index 59581a4b302a..b81e109970aa 100644 --- a/trunk/Documentation/cdrom/sonycd535 +++ b/trunk/Documentation/cdrom/sonycd535 @@ -68,7 +68,8 @@ it a better device citizen. Further thanks to Joel Katz Porfiri Claudio for patches to make the driver work with the older CDU-510/515 series, and Heiko Eissfeldt for pointing out that -the verify_area() checks were ignoring the results of said checks. +the verify_area() checks were ignoring the results of said checks +(note: verify_area() has since been replaced by access_ok()). (Acknowledgments from Ron Jeppesen in the 0.3 release:) Thanks to Corey Minyard who wrote the original CDU-31A driver on which diff --git a/trunk/Documentation/connector/cn_test.c b/trunk/Documentation/connector/cn_test.c new file mode 100644 index 000000000000..b7de82e9c0e0 --- /dev/null +++ b/trunk/Documentation/connector/cn_test.c @@ -0,0 +1,194 @@ +/* + * cn_test.c + * + * 2004-2005 Copyright (c) Evgeniy Polyakov + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include "connector.h" + +static struct cb_id cn_test_id = { 0x123, 0x456 }; +static char cn_test_name[] = "cn_test"; +static struct sock *nls; +static struct timer_list cn_test_timer; + +void cn_test_callback(void *data) +{ + struct cn_msg *msg = (struct cn_msg *)data; + + printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n", + __func__, jiffies, msg->id.idx, msg->id.val, + msg->seq, msg->ack, msg->len, (char *)msg->data); +} + +static int cn_test_want_notify(void) +{ + struct cn_ctl_msg *ctl; + struct cn_notify_req *req; + struct cn_msg *msg = NULL; + int size, size0; + struct sk_buff *skb; + struct nlmsghdr *nlh; + u32 group = 1; + + size0 = sizeof(*msg) + sizeof(*ctl) + 3 * sizeof(*req); + + size = NLMSG_SPACE(size0); + + skb = alloc_skb(size, GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "Failed to allocate new skb with size=%u.\n", + size); + + return -ENOMEM; + } + + nlh = NLMSG_PUT(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh)); + + msg = (struct cn_msg *)NLMSG_DATA(nlh); + + memset(msg, 0, size0); + + msg->id.idx = -1; + msg->id.val = -1; + msg->seq = 0x123; + msg->ack = 0x345; + msg->len = size0 - sizeof(*msg); + + ctl = (struct cn_ctl_msg *)(msg + 1); + + ctl->idx_notify_num = 1; + ctl->val_notify_num = 2; + ctl->group = group; + ctl->len = msg->len - sizeof(*ctl); + + req = (struct cn_notify_req *)(ctl + 1); + + /* + * Idx. + */ + req->first = cn_test_id.idx; + req->range = 10; + + /* + * Val 0. + */ + req++; + req->first = cn_test_id.val; + req->range = 10; + + /* + * Val 1. + */ + req++; + req->first = cn_test_id.val + 20; + req->range = 10; + + NETLINK_CB(skb).dst_groups = ctl->group; + //netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC); + netlink_unicast(nls, skb, 0, 0); + + printk(KERN_INFO "Request was sent. Group=0x%x.\n", ctl->group); + + return 0; + +nlmsg_failure: + printk(KERN_ERR "Failed to send %u.%u\n", msg->seq, msg->ack); + kfree_skb(skb); + return -EINVAL; +} + +static u32 cn_test_timer_counter; +static void cn_test_timer_func(unsigned long __data) +{ + struct cn_msg *m; + char data[32]; + + m = kmalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC); + if (m) { + memset(m, 0, sizeof(*m) + sizeof(data)); + + memcpy(&m->id, &cn_test_id, sizeof(m->id)); + m->seq = cn_test_timer_counter; + m->len = sizeof(data); + + m->len = + scnprintf(data, sizeof(data), "counter = %u", + cn_test_timer_counter) + 1; + + memcpy(m + 1, data, m->len); + + cn_netlink_send(m, 0, gfp_any()); + kfree(m); + } + + cn_test_timer_counter++; + + mod_timer(&cn_test_timer, jiffies + HZ); +} + +static int cn_test_init(void) +{ + int err; + + err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback); + if (err) + goto err_out; + cn_test_id.val++; + err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback); + if (err) { + cn_del_callback(&cn_test_id); + goto err_out; + } + + init_timer(&cn_test_timer); + cn_test_timer.function = cn_test_timer_func; + cn_test_timer.expires = jiffies + HZ; + cn_test_timer.data = 0; + add_timer(&cn_test_timer); + + return 0; + + err_out: + if (nls && nls->sk_socket) + sock_release(nls->sk_socket); + + return err; +} + +static void cn_test_fini(void) +{ + del_timer_sync(&cn_test_timer); + cn_del_callback(&cn_test_id); + cn_test_id.val--; + cn_del_callback(&cn_test_id); + if (nls && nls->sk_socket) + sock_release(nls->sk_socket); +} + +module_init(cn_test_init); +module_exit(cn_test_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_DESCRIPTION("Connector's test module"); diff --git a/trunk/Documentation/connector/connector.txt b/trunk/Documentation/connector/connector.txt new file mode 100644 index 000000000000..57a314b14cf8 --- /dev/null +++ b/trunk/Documentation/connector/connector.txt @@ -0,0 +1,177 @@ +/*****************************************/ +Kernel Connector. +/*****************************************/ + +Kernel connector - new netlink based userspace <-> kernel space easy +to use communication module. + +Connector driver adds possibility to connect various agents using +netlink based network. One must register callback and +identifier. When driver receives special netlink message with +appropriate identifier, appropriate callback will be called. + +From the userspace point of view it's quite straightforward: + + socket(); + bind(); + send(); + recv(); + +But if kernelspace want to use full power of such connections, driver +writer must create special sockets, must know about struct sk_buff +handling... Connector allows any kernelspace agents to use netlink +based networking for inter-process communication in a significantly +easier way: + +int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *)); +void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask); + +struct cb_id +{ + __u32 idx; + __u32 val; +}; + +idx and val are unique identifiers which must be registered in +connector.h for in-kernel usage. void (*callback) (void *) - is a +callback function which will be called when message with above idx.val +will be received by connector core. Argument for that function must +be dereferenced to struct cn_msg *. + +struct cn_msg +{ + struct cb_id id; + + __u32 seq; + __u32 ack; + + __u32 len; /* Length of the following data */ + __u8 data[0]; +}; + +/*****************************************/ +Connector interfaces. +/*****************************************/ + +int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *)); + +Registers new callback with connector core. + +struct cb_id *id - unique connector's user identifier. + It must be registered in connector.h for legal in-kernel users. +char *name - connector's callback symbolic name. +void (*callback) (void *) - connector's callback. + Argument must be dereferenced to struct cn_msg *. + +void cn_del_callback(struct cb_id *id); + +Unregisters new callback with connector core. + +struct cb_id *id - unique connector's user identifier. + +void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); + +Sends message to the specified groups. It can be safely called from +any context, but may silently fail under strong memory pressure. + +struct cn_msg * - message header(with attached data). +u32 __group - destination group. + If __group is zero, then appropriate group will + be searched through all registered connector users, + and message will be delivered to the group which was + created for user with the same ID as in msg. + If __group is not zero, then message will be delivered + to the specified group. +int gfp_mask - GFP mask. + +Note: When registering new callback user, connector core assigns +netlink group to the user which is equal to it's id.idx. + +/*****************************************/ +Protocol description. +/*****************************************/ + +Current offers transport layer with fixed header. Recommended +protocol which uses such header is following: + +msg->seq and msg->ack are used to determine message genealogy. When +someone sends message it puts there locally unique sequence and random +acknowledge numbers. Sequence number may be copied into +nlmsghdr->nlmsg_seq too. + +Sequence number is incremented with each message to be sent. + +If we expect reply to our message, then sequence number in received +message MUST be the same as in original message, and acknowledge +number MUST be the same + 1. + +If we receive message and it's sequence number is not equal to one we +are expecting, then it is new message. If we receive message and it's +sequence number is the same as one we are expecting, but it's +acknowledge is not equal acknowledge number in original message + 1, +then it is new message. + +Obviously, protocol header contains above id. + +connector allows event notification in the following form: kernel +driver or userspace process can ask connector to notify it when +selected id's will be turned on or off(registered or unregistered it's +callback). It is done by sending special command to connector +driver(it also registers itself with id={-1, -1}). + +As example of usage Documentation/connector now contains cn_test.c - +testing module which uses connector to request notification and to +send messages. + +/*****************************************/ +Reliability. +/*****************************************/ + +Netlink itself is not reliable protocol, that means that messages can +be lost due to memory pressure or process' receiving queue overflowed, +so caller is warned must be prepared. That is why struct cn_msg [main +connector's message header] contains u32 seq and u32 ack fields. + +/*****************************************/ +Userspace usage. +/*****************************************/ +2.6.14 has a new netlink socket implementation, which by default does not +allow to send data to netlink groups other than 1. +So, if to use netlink socket (for example using connector) +with different group number userspace application must subscribe to +that group. It can be achieved by following pseudocode: + +s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); + +l_local.nl_family = AF_NETLINK; +l_local.nl_groups = 12345; +l_local.nl_pid = 0; + +if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { + perror("bind"); + close(s); + return -1; +} + +{ + int on = l_local.nl_groups; + setsockopt(s, 270, 1, &on, sizeof(on)); +} + +Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket +option. To drop multicast subscription one should call above socket option +with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0. + +2.6.14 netlink code only allows to select a group which is less or equal to +the maximum group number, which is used at netlink_kernel_create() time. +In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use +group number 12345, you must increment CN_NETLINK_USERS to that number. +Additional 0xf numbers are allocated to be used by non-in-kernel users. + +Due to this limitation, group 0xffffffff does not work now, so one can +not use add/remove connector's group notifications, but as far as I know, +only cn_test.c test module used it. + +Some work in netlink area is still being done, so things can be changed in +2.6.15 timeframe, if it will happen, documentation will be updated for that +kernel. diff --git a/trunk/Documentation/cpu-freq/cpufreq-stats.txt b/trunk/Documentation/cpu-freq/cpufreq-stats.txt index e2d1e760b4ba..6a82948ff4bd 100644 --- a/trunk/Documentation/cpu-freq/cpufreq-stats.txt +++ b/trunk/Documentation/cpu-freq/cpufreq-stats.txt @@ -36,7 +36,7 @@ cpufreq stats provides following statistics (explained in detail below). All the statistics will be from the time the stats driver has been inserted to the time when a read of a particular statistic is done. Obviously, stats -driver will not have any information about the the frequcny transitions before +driver will not have any information about the frequency transitions before the stats driver insertion. -------------------------------------------------------------------------------- diff --git a/trunk/Documentation/cpusets.txt b/trunk/Documentation/cpusets.txt index ad944c060312..d17b7d2dd771 100644 --- a/trunk/Documentation/cpusets.txt +++ b/trunk/Documentation/cpusets.txt @@ -60,6 +60,18 @@ all of the cpus in the system. This removes any overhead due to load balancing code trying to pull tasks outside of the cpu exclusive cpuset only to be prevented by the tasks' cpus_allowed mask. +A cpuset that is mem_exclusive restricts kernel allocations for +page, buffer and other data commonly shared by the kernel across +multiple users. All cpusets, whether mem_exclusive or not, restrict +allocations of memory for user space. This enables configuring a +system so that several independent jobs can share common kernel +data, such as file system pages, while isolating each jobs user +allocation in its own cpuset. To do this, construct a large +mem_exclusive cpuset to hold all the jobs, and construct child, +non-mem_exclusive cpusets for each individual job. Only a small +amount of typical kernel memory, such as requests from interrupt +handlers, is allowed to be taken outside even a mem_exclusive cpuset. + User level code may create and destroy cpusets by name in the cpuset virtual file system, manage the attributes and permissions of these cpusets and which CPUs and Memory Nodes are assigned to each cpuset, @@ -265,7 +277,7 @@ rewritten to the 'tasks' file of its cpuset. This is done to avoid impacting the scheduler code in the kernel with a check for changes in a tasks processor placement. -There is an exception to the above. If hotplug funtionality is used +There is an exception to the above. If hotplug functionality is used to remove all the CPUs that are currently assigned to a cpuset, then the kernel will automatically update the cpus_allowed of all tasks attached to CPUs in that cpuset to allow all CPUs. When memory diff --git a/trunk/Documentation/crypto/descore-readme.txt b/trunk/Documentation/crypto/descore-readme.txt index 166474c2ee0b..16e9e6350755 100644 --- a/trunk/Documentation/crypto/descore-readme.txt +++ b/trunk/Documentation/crypto/descore-readme.txt @@ -1,4 +1,4 @@ -Below is the orginal README file from the descore.shar package. +Below is the original README file from the descore.shar package. ------------------------------------------------------------------------------ des - fast & portable DES encryption & decryption. diff --git a/trunk/Documentation/dcdbas.txt b/trunk/Documentation/dcdbas.txt new file mode 100644 index 000000000000..e1c52e2dc361 --- /dev/null +++ b/trunk/Documentation/dcdbas.txt @@ -0,0 +1,91 @@ +Overview + +The Dell Systems Management Base Driver provides a sysfs interface for +systems management software such as Dell OpenManage to perform system +management interrupts and host control actions (system power cycle or +power off after OS shutdown) on certain Dell systems. + +Dell OpenManage requires this driver on the following Dell PowerEdge systems: +300, 1300, 1400, 400SC, 500SC, 1500SC, 1550, 600SC, 1600SC, 650, 1655MC, +700, and 750. Other Dell software such as the open source libsmbios project +is expected to make use of this driver, and it may include the use of this +driver on other Dell systems. + +The Dell libsmbios project aims towards providing access to as much BIOS +information as possible. See http://linux.dell.com/libsmbios/main/ for +more information about the libsmbios project. + + +System Management Interrupt + +On some Dell systems, systems management software must access certain +management information via a system management interrupt (SMI). The SMI data +buffer must reside in 32-bit address space, and the physical address of the +buffer is required for the SMI. The driver maintains the memory required for +the SMI and provides a way for the application to generate the SMI. +The driver creates the following sysfs entries for systems management +software to perform these system management interrupts: + +/sys/devices/platform/dcdbas/smi_data +/sys/devices/platform/dcdbas/smi_data_buf_phys_addr +/sys/devices/platform/dcdbas/smi_data_buf_size +/sys/devices/platform/dcdbas/smi_request + +Systems management software must perform the following steps to execute +a SMI using this driver: + +1) Lock smi_data. +2) Write system management command to smi_data. +3) Write "1" to smi_request to generate a calling interface SMI or + "2" to generate a raw SMI. +4) Read system management command response from smi_data. +5) Unlock smi_data. + + +Host Control Action + +Dell OpenManage supports a host control feature that allows the administrator +to perform a power cycle or power off of the system after the OS has finished +shutting down. On some Dell systems, this host control feature requires that +a driver perform a SMI after the OS has finished shutting down. + +The driver creates the following sysfs entries for systems management software +to schedule the driver to perform a power cycle or power off host control +action after the system has finished shutting down: + +/sys/devices/platform/dcdbas/host_control_action +/sys/devices/platform/dcdbas/host_control_smi_type +/sys/devices/platform/dcdbas/host_control_on_shutdown + +Dell OpenManage performs the following steps to execute a power cycle or +power off host control action using this driver: + +1) Write host control action to be performed to host_control_action. +2) Write type of SMI that driver needs to perform to host_control_smi_type. +3) Write "1" to host_control_on_shutdown to enable host control action. +4) Initiate OS shutdown. + (Driver will perform host control SMI when it is notified that the OS + has finished shutting down.) + + +Host Control SMI Type + +The following table shows the value to write to host_control_smi_type to +perform a power cycle or power off host control action: + +PowerEdge System Host Control SMI Type +---------------- --------------------- + 300 HC_SMITYPE_TYPE1 + 1300 HC_SMITYPE_TYPE1 + 1400 HC_SMITYPE_TYPE2 + 500SC HC_SMITYPE_TYPE2 + 1500SC HC_SMITYPE_TYPE2 + 1550 HC_SMITYPE_TYPE2 + 600SC HC_SMITYPE_TYPE2 + 1600SC HC_SMITYPE_TYPE2 + 650 HC_SMITYPE_TYPE2 + 1655MC HC_SMITYPE_TYPE2 + 700 HC_SMITYPE_TYPE3 + 750 HC_SMITYPE_TYPE3 + + diff --git a/trunk/Documentation/dell_rbu.txt b/trunk/Documentation/dell_rbu.txt new file mode 100644 index 000000000000..941343a7a265 --- /dev/null +++ b/trunk/Documentation/dell_rbu.txt @@ -0,0 +1,100 @@ +Purpose: +Demonstrate the usage of the new open sourced rbu (Remote BIOS Update) driver +for updating BIOS images on Dell servers and desktops. + +Scope: +This document discusses the functionality of the rbu driver only. +It does not cover the support needed from aplications to enable the BIOS to +update itself with the image downloaded in to the memory. + +Overview: +This driver works with Dell OpenManage or Dell Update Packages for updating +the BIOS on Dell servers (starting from servers sold since 1999), desktops +and notebooks (starting from those sold in 2005). +Please go to http://support.dell.com register and you can find info on +OpenManage and Dell Update packages (DUP). +Libsmbios can also be used to update BIOS on Dell systems go to +http://linux.dell.com/libsmbios/ for details. + +Dell_RBU driver supports BIOS update using the monilothic image and packetized +image methods. In case of moniolithic the driver allocates a contiguous chunk +of physical pages having the BIOS image. In case of packetized the app +using the driver breaks the image in to packets of fixed sizes and the driver +would place each packet in contiguous physical memory. The driver also +maintains a link list of packets for reading them back. +If the dell_rbu driver is unloaded all the allocated memory is freed. + +The rbu driver needs to have an application (as mentioned above)which will +inform the BIOS to enable the update in the next system reboot. + +The user should not unload the rbu driver after downloading the BIOS image +or updating. + +The driver load creates the following directories under the /sys file system. +/sys/class/firmware/dell_rbu/loading +/sys/class/firmware/dell_rbu/data +/sys/devices/platform/dell_rbu/image_type +/sys/devices/platform/dell_rbu/data +/sys/devices/platform/dell_rbu/packet_size + +The driver supports two types of update mechanism; monolithic and packetized. +These update mechanism depends upon the BIOS currently running on the system. +Most of the Dell systems support a monolithic update where the BIOS image is +copied to a single contiguous block of physical memory. +In case of packet mechanism the single memory can be broken in smaller chuks +of contiguous memory and the BIOS image is scattered in these packets. + +By default the driver uses monolithic memory for the update type. This can be +changed to packets during the driver load time by specifying the load +parameter image_type=packet. This can also be changed later as below +echo packet > /sys/devices/platform/dell_rbu/image_type + +In packet update mode the packet size has to be given before any packets can +be downloaded. It is done as below +echo XXXX > /sys/devices/platform/dell_rbu/packet_size +In the packet update mechanism, the user neesd to create a new file having +packets of data arranged back to back. It can be done as follows +The user creates packets header, gets the chunk of the BIOS image and +placs it next to the packetheader; now, the packetheader + BIOS image chunk +added to geather should match the specified packet_size. This makes one +packet, the user needs to create more such packets out of the entire BIOS +image file and then arrange all these packets back to back in to one single +file. +This file is then copied to /sys/class/firmware/dell_rbu/data. +Once this file gets to the driver, the driver extracts packet_size data from +the file and spreads it accross the physical memory in contiguous packet_sized +space. +This method makes sure that all the packets get to the driver in a single operation. + +In monolithic update the user simply get the BIOS image (.hdr file) and copies +to the data file as is without any change to the BIOS image itself. + +Do the steps below to download the BIOS image. +1) echo 1 > /sys/class/firmware/dell_rbu/loading +2) cp bios_image.hdr /sys/class/firmware/dell_rbu/data +3) echo 0 > /sys/class/firmware/dell_rbu/loading + +The /sys/class/firmware/dell_rbu/ entries will remain till the following is +done. +echo -1 > /sys/class/firmware/dell_rbu/loading. +Until this step is completed the driver cannot be unloaded. +Also echoing either mono ,packet or init in to image_type will free up the +memory allocated by the driver. + +If an user by accident executes steps 1 and 3 above without executing step 2; +it will make the /sys/class/firmware/dell_rbu/ entries to disappear. +The entries can be recreated by doing the following +echo init > /sys/devices/platform/dell_rbu/image_type +NOTE: echoing init in image_type does not change it original value. + +Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to +read back the image downloaded. + +NOTE: +This driver requires a patch for firmware_class.c which has the modified +request_firmware_nowait function. +Also after updating the BIOS image an user mdoe application neeeds to execute +code which message the BIOS update request to the BIOS. So on the next reboot +the BIOS knows about the new image downloaded and it updates it self. +Also don't unload the rbu drive if the image has to be updated. + diff --git a/trunk/Documentation/device-mapper/snapshot.txt b/trunk/Documentation/device-mapper/snapshot.txt new file mode 100644 index 000000000000..dca274ff4005 --- /dev/null +++ b/trunk/Documentation/device-mapper/snapshot.txt @@ -0,0 +1,73 @@ +Device-mapper snapshot support +============================== + +Device-mapper allows you, without massive data copying: + +*) To create snapshots of any block device i.e. mountable, saved states of +the block device which are also writable without interfering with the +original content; +*) To create device "forks", i.e. multiple different versions of the +same data stream. + + +In both cases, dm copies only the chunks of data that get changed and +uses a separate copy-on-write (COW) block device for storage. + + +There are two dm targets available: snapshot and snapshot-origin. + +*) snapshot-origin + +which will normally have one or more snapshots based on it. +You must create the snapshot-origin device before you can create snapshots. +Reads will be mapped directly to the backing device. For each write, the +original data will be saved in the of each snapshot to keep +its visible content unchanged, at least until the fills up. + + +*) snapshot + +A snapshot is created of the block device. Changed chunks of + sectors will be stored on the . Writes will +only go to the . Reads will come from the or +from for unchanged data. will often be +smaller than the origin and if it fills up the snapshot will become +useless and be disabled, returning errors. So it is important to monitor +the amount of free space and expand the before it fills up. + + is P (Persistent) or N (Not persistent - will not survive +after reboot). + + +How this is used by LVM2 +======================== +When you create the first LVM2 snapshot of a volume, four dm devices are used: + +1) a device containing the original mapping table of the source volume; +2) a device used as the ; +3) a "snapshot" device, combining #1 and #2, which is the visible snapshot + volume; +4) the "original" volume (which uses the device number used by the original + source volume), whose table is replaced by a "snapshot-origin" mapping + from device #1. + +A fixed naming scheme is used, so with the following commands: + +lvcreate -L 1G -n base volumeGroup +lvcreate -L 100M --snapshot -n snap volumeGroup/base + +we'll have this situation (with volumes in above order): + +# dmsetup table|grep volumeGroup + +volumeGroup-base-real: 0 2097152 linear 8:19 384 +volumeGroup-snap-cow: 0 204800 linear 8:19 2097536 +volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16 +volumeGroup-base: 0 2097152 snapshot-origin 254:11 + +# ls -lL /dev/mapper/volumeGroup-* +brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real +brw------- 1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow +brw------- 1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap +brw------- 1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base + diff --git a/trunk/Documentation/dontdiff b/trunk/Documentation/dontdiff index 96bea278bbf6..24adfe9af3ca 100644 --- a/trunk/Documentation/dontdiff +++ b/trunk/Documentation/dontdiff @@ -55,6 +55,7 @@ aic7*seq.h* aicasm aicdb.h* asm +asm-offsets.* asm_offsets.* autoconf.h* bbootsect diff --git a/trunk/Documentation/dvb/bt8xx.txt b/trunk/Documentation/dvb/bt8xx.txt index e6b8d05bc08d..cb63b7a93c82 100644 --- a/trunk/Documentation/dvb/bt8xx.txt +++ b/trunk/Documentation/dvb/bt8xx.txt @@ -1,55 +1,74 @@ -How to get the Nebula Electronics DigiTV, Pinnacle PCTV Sat, Twinhan DST + clones working -========================================================================================= +How to get the Nebula, PCTV and Twinhan DST cards working +========================================================= -1) General information -====================== +This class of cards has a bt878a as the PCI interface, and +require the bttv driver. -This class of cards has a bt878a chip as the PCI interface. -The different card drivers require the bttv driver to provide the means -to access the i2c bus and the gpio pins of the bt8xx chipset. +Please pay close attention to the warning about the bttv module +options below for the DST card. -2) Compilation rules for Kernel >= 2.6.12 -========================================= +1) General informations +======================= -Enable the following options: +These drivers require the bttv driver to provide the means to access +the i2c bus and the gpio pins of the bt8xx chipset. +Because of this, you need to enable "Device drivers" => "Multimedia devices" - => "Video For Linux" => "BT848 Video For Linux" + => "Video For Linux" => "BT848 Video For Linux" + +Furthermore you need to enable "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" - => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards" + => "DVB for Linux" "DVB Core Support" "BT8xx based PCI cards" -3) Loading Modules, described by two approaches -=============================================== +2) Loading Modules +================== In general you need to load the bttv driver, which will handle the gpio and -i2c communication for us, plus the common dvb-bt8xx device driver, -which is called the backend. -The frontends for Nebula DigiTV (nxt6000), Pinnacle PCTV Sat (cx24110), -TwinHan DST + clones (dst and dst-ca) are loaded automatically by the backend. -For further details about TwinHan DST + clones see /Documentation/dvb/ci.txt. +i2c communication for us, plus the common dvb-bt8xx device driver. +The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and +TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. -3a) The manual approach ------------------------ +3a) Nebula / Pinnacle PCTV +-------------------------- -Loading modules: -modprobe bttv -modprobe dvb-bt8xx + $ modprobe bttv (normally bttv is being loaded automatically by kmod) + $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) -Unloading modules: -modprobe -r dvb-bt8xx -modprobe -r bttv -3b) The automatic approach +3b) TwinHan and Clones -------------------------- -If not already done by installation, place a line either in -/etc/modules.conf or in /etc/modprobe.conf containing this text: -alias char-major-81 bttv + $ modprobe bttv i2c_hw=1 card=0x71 + $ modprobe dvb-bt8xx + $ modprobe dst + +The value 0x71 will override the PCI type detection for dvb-bt8xx, +which is necessary for TwinHan cards. + +If you're having an older card (blue color circuit) and card=0x71 locks +your machine, try using 0x68, too. If that does not work, ask on the +mailing list. + +The DST module takes a couple of useful parameters. + +verbose takes values 0 to 4. These values control the verbosity level, +and can be used to debug also. + +verbose=0 means complete disabling of messages + 1 only error messages are displayed + 2 notifications are also displayed + 3 informational messages are also displayed + 4 debug setting + +dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card. +0x20 means it has a Conditional Access slot. + +The autodected values are determined bythe cards 'response +string' which you can see in your logs e.g. -Then place a line in /etc/modules containing this text: -dvb-bt8xx +dst_get_device_id: Recognise [DSTMCI] -Reboot your system and have fun! -- -Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham, Uwe Bugla +Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham diff --git a/trunk/Documentation/dvb/ci.txt b/trunk/Documentation/dvb/ci.txt index 62e0701b542a..95f0e73b2135 100644 --- a/trunk/Documentation/dvb/ci.txt +++ b/trunk/Documentation/dvb/ci.txt @@ -23,7 +23,6 @@ This application requires the following to function properly as of now. eg: $ szap -c channels.conf -r "TMC" -x (b) a channels.conf containing a valid PMT PID - eg: TMC:11996:h:0:27500:278:512:650:321 here 278 is a valid PMT PID. the rest of the values are the @@ -31,13 +30,7 @@ This application requires the following to function properly as of now. (c) after running a szap, you have to run ca_zap, for the descrambler to function, - - eg: $ ca_zap patched_channels.conf "TMC" - - The patched means a patch to apply to scan, such that scan can - generate a channels.conf_with pmt, which has this PMT PID info - (NOTE: szap cannot use this channels.conf with the PMT_PID) - + eg: $ ca_zap channels.conf "TMC" (d) Hopeflly Enjoy your favourite subscribed channel as you do with a FTA card. diff --git a/trunk/Documentation/exception.txt b/trunk/Documentation/exception.txt index f1d436993eb1..3cb39ade290e 100644 --- a/trunk/Documentation/exception.txt +++ b/trunk/Documentation/exception.txt @@ -7,7 +7,7 @@ To protect itself the kernel has to verify this address. In older versions of Linux this was done with the int verify_area(int type, const void * addr, unsigned long size) -function. +function (which has since been replaced by access_ok()). This function verified that the memory area starting at address addr and of size size was accessible for the operation specified diff --git a/trunk/Documentation/fb/cyblafb/bugs b/trunk/Documentation/fb/cyblafb/bugs new file mode 100644 index 000000000000..f90cc66ea919 --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/bugs @@ -0,0 +1,14 @@ +Bugs +==== + +I currently don't know of any bug. Please do send reports to: + - linux-fbdev-devel@lists.sourceforge.net + - Knut_Petersen@t-online.de. + + +Untested features +================= + +All LCD stuff is untested. If it worked in tridentfb, it should work in +cyblafb. Please test and report the results to Knut_Petersen@t-online.de. + diff --git a/trunk/Documentation/fb/cyblafb/credits b/trunk/Documentation/fb/cyblafb/credits new file mode 100644 index 000000000000..0eb3b443dc2b --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/credits @@ -0,0 +1,7 @@ +Thanks to +========= + * Alan Hourihane, for writing the X trident driver + * Jani Monoses, for writing the tridentfb driver + * Antonino A. Daplas, for review of the first published + version of cyblafb and some code + * Jochen Hein, for testing and a helpfull bug report diff --git a/trunk/Documentation/fb/cyblafb/documentation b/trunk/Documentation/fb/cyblafb/documentation new file mode 100644 index 000000000000..bb1aac048425 --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/documentation @@ -0,0 +1,17 @@ +Available Documentation +======================= + +Apollo PLE 133 Chipset VT8601A North Bridge Datasheet, Rev. 1.82, October 22, +2001, available from VIA: + + http://www.viavpsd.com/product/6/15/DS8601A182.pdf + +The datasheet is incomplete, some registers that need to be programmed are not +explained at all and important bits are listed as "reserved". But you really +need the datasheet to understand the code. "p. xxx" comments refer to page +numbers of this document. + +XFree/XOrg drivers are available and of good quality, looking at the code +there is a good idea if the datasheet does not provide enough information +or if the datasheet seems to be wrong. + diff --git a/trunk/Documentation/fb/cyblafb/fb.modes b/trunk/Documentation/fb/cyblafb/fb.modes new file mode 100644 index 000000000000..cf4351fc32ff --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/fb.modes @@ -0,0 +1,155 @@ +# +# Sample fb.modes file +# +# Provides an incomplete list of working modes for +# the cyberblade/i1 graphics core. +# +# The value 4294967256 is used instead of -40. Of course, -40 is not +# a really reasonable value, but chip design does not always follow +# logic. Believe me, it's ok, and it's the way the BIOS does it. +# +# fbset requires 4294967256 in fb.modes and -40 as an argument to +# the -t parameter. That's also not too reasonable, and it might change +# in the future or might even be differt for your current version. +# + +mode "640x480-50" + geometry 640 480 640 3756 8 + timings 47619 4294967256 24 17 0 216 3 +endmode + +mode "640x480-60" + geometry 640 480 640 3756 8 + timings 39682 4294967256 24 17 0 216 3 +endmode + +mode "640x480-70" + geometry 640 480 640 3756 8 + timings 34013 4294967256 24 17 0 216 3 +endmode + +mode "640x480-72" + geometry 640 480 640 3756 8 + timings 33068 4294967256 24 17 0 216 3 +endmode + +mode "640x480-75" + geometry 640 480 640 3756 8 + timings 31746 4294967256 24 17 0 216 3 +endmode + +mode "640x480-80" + geometry 640 480 640 3756 8 + timings 29761 4294967256 24 17 0 216 3 +endmode + +mode "640x480-85" + geometry 640 480 640 3756 8 + timings 28011 4294967256 24 17 0 216 3 +endmode + +mode "800x600-50" + geometry 800 600 800 3221 8 + timings 30303 96 24 14 0 136 11 +endmode + +mode "800x600-60" + geometry 800 600 800 3221 8 + timings 25252 96 24 14 0 136 11 +endmode + +mode "800x600-70" + geometry 800 600 800 3221 8 + timings 21645 96 24 14 0 136 11 +endmode + +mode "800x600-72" + geometry 800 600 800 3221 8 + timings 21043 96 24 14 0 136 11 +endmode + +mode "800x600-75" + geometry 800 600 800 3221 8 + timings 20202 96 24 14 0 136 11 +endmode + +mode "800x600-80" + geometry 800 600 800 3221 8 + timings 18939 96 24 14 0 136 11 +endmode + +mode "800x600-85" + geometry 800 600 800 3221 8 + timings 17825 96 24 14 0 136 11 +endmode + +mode "1024x768-50" + geometry 1024 768 1024 2815 8 + timings 19054 144 24 29 0 120 3 +endmode + +mode "1024x768-60" + geometry 1024 768 1024 2815 8 + timings 15880 144 24 29 0 120 3 +endmode + +mode "1024x768-70" + geometry 1024 768 1024 2815 8 + timings 13610 144 24 29 0 120 3 +endmode + +mode "1024x768-72" + geometry 1024 768 1024 2815 8 + timings 13232 144 24 29 0 120 3 +endmode + +mode "1024x768-75" + geometry 1024 768 1024 2815 8 + timings 12703 144 24 29 0 120 3 +endmode + +mode "1024x768-80" + geometry 1024 768 1024 2815 8 + timings 11910 144 24 29 0 120 3 +endmode + +mode "1024x768-85" + geometry 1024 768 1024 2815 8 + timings 11209 144 24 29 0 120 3 +endmode + +mode "1280x1024-50" + geometry 1280 1024 1280 2662 8 + timings 11114 232 16 39 0 160 3 +endmode + +mode "1280x1024-60" + geometry 1280 1024 1280 2662 8 + timings 9262 232 16 39 0 160 3 +endmode + +mode "1280x1024-70" + geometry 1280 1024 1280 2662 8 + timings 7939 232 16 39 0 160 3 +endmode + +mode "1280x1024-72" + geometry 1280 1024 1280 2662 8 + timings 7719 232 16 39 0 160 3 +endmode + +mode "1280x1024-75" + geometry 1280 1024 1280 2662 8 + timings 7410 232 16 39 0 160 3 +endmode + +mode "1280x1024-80" + geometry 1280 1024 1280 2662 8 + timings 6946 232 16 39 0 160 3 +endmode + +mode "1280x1024-85" + geometry 1280 1024 1280 2662 8 + timings 6538 232 16 39 0 160 3 +endmode + diff --git a/trunk/Documentation/fb/cyblafb/performance b/trunk/Documentation/fb/cyblafb/performance new file mode 100644 index 000000000000..eb4e47a9cea6 --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/performance @@ -0,0 +1,80 @@ +Speed +===== + +CyBlaFB is much faster than tridentfb and vesafb. Compare the performance data +for mode 1280x1024-[8,16,32]@61 Hz. + +Test 1: Cat a file with 2000 lines of 0 characters. +Test 2: Cat a file with 2000 lines of 80 characters. +Test 3: Cat a file with 2000 lines of 160 characters. + +All values show system time use in seconds, kernel 2.6.12 was used for +the measurements. 2.6.13 is a bit slower, 2.6.14 hopefully will include a +patch that speeds up kernel bitblitting a lot ( > 20%). + ++-----------+-----------------------------------------------------+ +| | not accelerated | +| TRIDENTFB +-----------------+-----------------+-----------------+ +| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | 4.31 | 4.33 | 6.05 | 12.81 | ---- | ---- | +| Test 2 | 67.94 | 5.44 | 123.16 | 14.79 | ---- | ---- | +| Test 3 | 131.36 | 6.55 | 240.12 | 16.76 | ---- | ---- | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | | | completely bro- | +| | | | ken, monitor | +| | | | switches off | ++-----------+-----------------+-----------------+-----------------+ + + ++-----------+-----------------------------------------------------+ +| | accelerated | +| TRIDENTFB +-----------------+-----------------+-----------------+ +| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | ---- | ---- | 20.62 | 1.22 | ---- | ---- | +| Test 2 | ---- | ---- | 22.61 | 3.19 | ---- | ---- | +| Test 3 | ---- | ---- | 24.59 | 5.16 | ---- | ---- | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | broken, writing | broken, ok only | completely bro- | +| | to wrong places | if bgcolor is | ken, monitor | +| | on screen + bug | black, bug in | switches off | +| | in fillrect() | fillrect() | | ++-----------+-----------------+-----------------+-----------------+ + + ++-----------+-----------------------------------------------------+ +| | not accelerated | +| VESAFB +-----------------+-----------------+-----------------+ +| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | 4.26 | 3.76 | 5.99 | 7.23 | ---- | ---- | +| Test 2 | 65.65 | 4.89 | 120.88 | 9.08 | ---- | ---- | +| Test 3 | 126.91 | 5.94 | 235.77 | 11.03 | ---- | ---- | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | vga=0x307 | vga=0x31a | vga=0x31b not | +| | fh=80kHz | fh=80kHz | supported by | +| | fv=75kHz | fv=75kHz | video BIOS and | +| | | | hardware | ++-----------+-----------------+-----------------+-----------------+ + + ++-----------+-----------------------------------------------------+ +| | accelerated | +| CYBLAFB +-----------------+-----------------+-----------------+ +| | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | 8.02 | 0.23 | 19.04 | 0.61 | 57.12 | 2.74 | +| Test 2 | 8.38 | 0.55 | 19.39 | 0.92 | 57.54 | 3.13 | +| Test 3 | 8.73 | 0.86 | 19.74 | 1.24 | 57.95 | 3.51 | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | | | | +| | | | | +| | | | | +| | | | | ++-----------+-----------------+-----------------+-----------------+ + diff --git a/trunk/Documentation/fb/cyblafb/todo b/trunk/Documentation/fb/cyblafb/todo new file mode 100644 index 000000000000..80fb2f89b6c1 --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/todo @@ -0,0 +1,32 @@ +TODO / Missing features +======================= + +Verify LCD stuff "stretch" and "center" options are + completely untested ... this code needs to be + verified. As I don't have access to such + hardware, please contact me if you are + willing run some tests. + +Interlaced video modes The reason that interleaved + modes are disabled is that I do not know + the meaning of the vertical interlace + parameter. Also the datasheet mentions a + bit d8 of a horizontal interlace parameter, + but nowhere the lower 8 bits. Please help + if you can. + +low-res double scan modes Who needs it? + +accelerated color blitting Who needs it? The console driver does use color + blitting for nothing but drawing the penguine, + everything else is done using color expanding + blitting of 1bpp character bitmaps. + +xpanning Who needs it? + +ioctls Who needs it? + +TV-out Will be done later + +??? Feel free to contact me if you have any + feature requests diff --git a/trunk/Documentation/fb/cyblafb/usage b/trunk/Documentation/fb/cyblafb/usage new file mode 100644 index 000000000000..e627c8f54211 --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/usage @@ -0,0 +1,206 @@ +CyBlaFB is a framebuffer driver for the Cyberblade/i1 graphics core integrated +into the VIA Apollo PLE133 (aka vt8601) south bridge. It is developed and +tested using a VIA EPIA 5000 board. + +Cyblafb - compiled into the kernel or as a module? +================================================== + +You might compile cyblafb either as a module or compile it permanently into the +kernel. + +Unless you have a real reason to do so you should not compile both vesafb and +cyblafb permanently into the kernel. It's possible and it helps during the +developement cycle, but it's useless and will at least block some otherwise +usefull memory for ordinary users. + +Selecting Modes +=============== + + Startup Mode + ============ + + First of all, you might use the "vga=???" boot parameter as it is + documented in vesafb.txt and svga.txt. Cyblafb will detect the video + mode selected and will use the geometry and timings found by + inspecting the hardware registers. + + video=cyblafb vga=0x317 + + Alternatively you might use a combination of the mode, ref and bpp + parameters. If you compiled the driver into the kernel, add something + like this to the kernel command line: + + video=cyblafb:1280x1024,bpp=16,ref=50 ... + + If you compiled the driver as a module, the same mode would be + selected by the following command: + + modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ... + + None of the modes possible to select as startup modes are affected by + the problems described at the end of the next subsection. + + Mode changes using fbset + ======================== + + You might use fbset to change the video mode, see "man fbset". Cyblafb + generally does assume that you know what you are doing. But it does + some checks, especially those that are needed to prevent you from + damaging your hardware. + + - only 8, 16, 24 and 32 bpp video modes are accepted + - interlaced video modes are not accepted + - double scan video modes are not accepted + - if a flat panel is found, cyblafb does not allow you + to program a resolution higher than the physical + resolution of the flat panel monitor + - cyblafb does not allow xres to differ from xres_virtual + - cyblafb does not allow vclk to exceed 230 MHz. As 32 bpp + and (currently) 24 bit modes use a doubled vclk internally, + the dotclock limit as seen by fbset is 115 MHz for those + modes and 230 MHz for 8 and 16 bpp modes. + + Any request that violates the rules given above will be ignored and + fbset will return an error. + + If you program a virtual y resolution higher than the hardware limit, + cyblafb will silently decrease that value to the highest possible + value. + + Attempts to disable acceleration are ignored. + + Some video modes that should work do not work as expected. If you use + the standard fb.modes, fbset 640x480-60 will program that mode, but + you will see a vertical area, about two characters wide, with only + much darker characters than the other characters on the screen. + Cyblafb does allow that mode to be set, as it does not violate the + official specifications. It would need a lot of code to reliably sort + out all invalid modes, playing around with the margin values will + give a valid mode quickly. And if cyblafb would detect such an invalid + mode, should it silently alter the requested values or should it + report an error? Both options have some pros and cons. As stated + above, none of the startup modes are affected, and if you set + verbosity to 1 or higher, cyblafb will print the fbset command that + would be needed to program that mode using fbset. + + +Other Parameters +================ + + +crt don't autodetect, assume monitor connected to + standard VGA connector + +fp don't autodetect, assume flat panel display + connected to flat panel monitor interface + +nativex inform driver about native x resolution of + flat panel monitor connected to special + interface (should be autodetected) + +stretch stretch image to adapt low resolution modes to + higer resolutions of flat panel monitors + connected to special interface + +center center image to adapt low resolution modes to + higer resolutions of flat panel monitors + connected to special interface + +memsize use if autodetected memsize is wrong ... + should never be necessary + +nopcirr disable PCI read retry +nopciwr disable PCI write retry +nopcirb disable PCI read bursts +nopciwb disable PCI write bursts + +bpp bpp for specified modes + valid values: 8 || 16 || 24 || 32 + +ref refresh rate for specified mode + valid values: 50 <= ref <= 85 + +mode 640x480 or 800x600 or 1024x768 or 1280x1024 + if not specified, the startup mode will be detected + and used, so you might also use the vga=??? parameter + described in vesafb.txt. If you do not specify a mode, + bpp and ref parameters are ignored. + +verbosity 0 is the default, increase to at least 2 for every + bug report! + +vesafb allows cyblafb to be loaded after vesafb has been + loaded. See sections "Module unloading ...". + + +Development hints +================= + +It's much faster do compile a module and to load the new version after +unloading the old module than to compile a new kernel and to reboot. So if you +try to work on cyblafb, it might be a good idea to use cyblafb as a module. +In real life, fast often means dangerous, and that's also the case here. If +you introduce a serious bug when cyblafb is compiled into the kernel, the +kernel will lock or oops with a high probability before the file system is +mounted, and the danger for your data is low. If you load a broken own version +of cyblafb on a running system, the danger for the integrity of the file +system is much higher as you might need a hard reset afterwards. Decide +yourself. + +Module unloading, the vfb method +================================ + +If you want to unload/reload cyblafb using the virtual framebuffer, you need +to enable vfb support in the kernel first. After that, load the modules as +shown below: + + modprobe vfb vfb_enable=1 + modprobe fbcon + modprobe cyblafb + fbset -fb /dev/fb1 1280x1024-60 -vyres 2662 + con2fb /dev/fb1 /dev/tty1 + ... + +If you now made some changes to cyblafb and want to reload it, you might do it +as show below: + + con2fb /dev/fb0 /dev/tty1 + ... + rmmod cyblafb + modprobe cyblafb + con2fb /dev/fb1 /dev/tty1 + ... + +Of course, you might choose another mode, and most certainly you also want to +map some other /dev/tty* to the real framebuffer device. You might also choose +to compile fbcon as a kernel module or place it permanently in the kernel. + +I do not know of any way to unload fbcon, and fbcon will prevent the +framebuffer device loaded first from unloading. [If there is a way, then +please add a description here!] + +Module unloading, the vesafb method +=================================== + +Configure the kernel: + + <*> Support for frame buffer devices + [*] VESA VGA graphics support + Cyberblade/i1 support + +Add e.g. "video=vesafb:ypan vga=0x307" to the kernel parameters. The ypan +parameter is important, choose any vga parameter you like as long as it is +a graphics mode. + +After booting, load cyblafb without any mode and bpp parameter and assign +cyblafb to individual ttys using con2fb, e.g.: + + modprobe cyblafb vesafb=1 + con2fb /dev/fb1 /dev/tty1 + +Unloading cyblafb works without problems after you assign vesafb to all +ttys again, e.g.: + + con2fb /dev/fb0 /dev/tty1 + rmmod cyblafb + diff --git a/trunk/Documentation/fb/cyblafb/whycyblafb b/trunk/Documentation/fb/cyblafb/whycyblafb new file mode 100644 index 000000000000..a123bc11e698 --- /dev/null +++ b/trunk/Documentation/fb/cyblafb/whycyblafb @@ -0,0 +1,85 @@ +I tried the following framebuffer drivers: + + - TRIDENTFB is full of bugs. Acceleration is broken for Blade3D + graphics cores like the cyberblade/i1. It claims to support a great + number of devices, but documentation for most of these devices is + unfortunately not available. There is _no_ reason to use tridentfb + for cyberblade/i1 + CRT users. VESAFB is faster, and the one + advantage, mode switching, is broken in tridentfb. + + - VESAFB is used by many distributions as a standard. Vesafb does + not support mode switching. VESAFB is a bit faster than the working + configurations of TRIDENTFB, but it is still too slow, even if you + use ypan. + + - EPIAFB (you'll find it on sourceforge) supports the Cyberblade/i1 + graphics core, but it still has serious bugs and developement seems + to have stopped. This is the one driver with TV-out support. If you + do need this feature, try epiafb. + +None of these drivers was a real option for me. + +I believe that is unreasonable to change code that announces to support 20 +devices if I only have more or less sufficient documentation for exactly one +of these. The risk of breaking device foo while fixing device bar is too high. + +So I decided to start CyBlaFB as a stripped down tridentfb. + +All code specific to other Trident chips has been removed. After that there +were a lot of cosmetic changes to increase the readability of the code. All +register names were changed to those mnemonics used in the datasheet. Function +and macro names were changed if they hindered easy understanding of the code. + +After that I debugged the code and implemented some new features. I'll try to +give a little summary of the main changes: + + - calculation of vertical and horizontal timings was fixed + + - video signal quality has been improved dramatically + + - acceleration: + + - fillrect and copyarea were fixed and reenabled + + - color expanding imageblit was newly implemented, color + imageblit (only used to draw the penguine) still uses the + generic code. + + - init of the acceleration engine was improved and moved to a + place where it really works ... + + - sync function has a timeout now and tries to reset and + reinit the accel engine if necessary + + - fewer slow copyarea calls when doing ypan scrolling by using + undocumented bit d21 of screen start address stored in + CR2B[5]. BIOS does use it also, so this should be safe. + + - cyblafb rejects any attempt to set modes that would cause vclk + values above reasonable 230 MHz. 32bit modes use a clock + multiplicator of 2, so fbset does show the correct values for + pixclock but not for vclk in this case. The fbset limit is 115 MHz + for 32 bpp modes. + + - cyblafb rejects modes known to be broken or unimplemented (all + interlaced modes, all doublescan modes for now) + + - cyblafb now works independant of the video mode in effect at startup + time (tridentfb does not init all needed registers to reasonable + values) + + - switching between video modes does work reliably now + + - the first video mode now is the one selected on startup using the + vga=???? mechanism or any of + - 640x480, 800x600, 1024x768, 1280x1024 + - 8, 16, 24 or 32 bpp + - refresh between 50 Hz and 85 Hz, 1 Hz steps (1280x1024-32 + is limited to 63Hz) + + - pci retry and pci burst mode are settable (try to disable if you + experience latency problems) + + - built as a module cyblafb might be unloaded and reloaded using + the vfb module and con2vt or might be used together with vesafb + diff --git a/trunk/Documentation/fb/intel810.txt b/trunk/Documentation/fb/intel810.txt index fd68b162e4a1..4f0d6bc789ef 100644 --- a/trunk/Documentation/fb/intel810.txt +++ b/trunk/Documentation/fb/intel810.txt @@ -5,6 +5,7 @@ Intel 810/815 Framebuffer driver March 17, 2002 First Released: July 2001 + Last Update: September 12, 2005 ================================================================ A. Introduction @@ -44,6 +45,8 @@ B. Features - Hardware Cursor Support + - Supports EDID probing either by DDC/I2C or through the BIOS + C. List of available options a. "video=i810fb" @@ -52,14 +55,17 @@ C. List of available options Recommendation: required b. "xres:" - select horizontal resolution in pixels + select horizontal resolution in pixels. (This parameter will be + ignored if 'mode_option' is specified. See 'o' below). Recommendation: user preference (default = 640) c. "yres:" select vertical resolution in scanlines. If Discrete Video Timings - is enabled, this will be ignored and computed as 3*xres/4. + is enabled, this will be ignored and computed as 3*xres/4. (This + parameter will be ignored if 'mode_option' is specified. See 'o' + below) Recommendation: user preference (default = 480) @@ -86,7 +92,8 @@ C. List of available options g. "hsync1/hsync2:" select the minimum and maximum Horizontal Sync Frequency of the monitor in KHz. If a using a fixed frequency monitor, hsync1 must - be equal to hsync2. + be equal to hsync2. If EDID probing is successful, these will be + ignored and values will be taken from the EDID block. Recommendation: check monitor manual for correct values default (29/30) @@ -94,7 +101,8 @@ C. List of available options h. "vsync1/vsync2:" select the minimum and maximum Vertical Sync Frequency of the monitor in Hz. You can also use this option to lock your monitor's refresh - rate. + rate. If EDID probing is successful, these will be ignored and values + will be taken from the EDID block. Recommendation: check monitor manual for correct values (default = 60/60) @@ -154,7 +162,11 @@ C. List of available options Recommendation: do not set (default = not set) - + o. x[-][@] + The driver will now accept specification of boot mode option. If this + is specified, the options 'xres' and 'yres' will be ignored. See + Documentation/fb/modedb.txt for usage. + D. Kernel booting Separate each option/option-pair by commas (,) and the option from its value @@ -176,7 +188,10 @@ will be computed based on the hsync1/hsync2 and vsync1/vsync2 values. IMPORTANT: You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes -better than 640x480 at 60Hz. +better than 640x480 at 60Hz. HOWEVER, if your chipset/display combination +supports I2C and has an EDID block, you can safely exclude hsync1, hsync2, +vsync1 and vsync2 parameters. These parameters will be taken from the EDID +block. E. Module options @@ -217,32 +232,21 @@ F. Setup This is required. The option is under "Character Devices" d. Under "Graphics Support", select "Intel 810/815" either statically - or as a module. Choose "use VESA GTF for video timings" if you - need to maximize the capability of your display. To be on the + or as a module. Choose "use VESA Generalized Timing Formula" if + you need to maximize the capability of your display. To be on the safe side, you can leave this unselected. - e. If you want a framebuffer console, enable it under "Console + e. If you want support for DDC/I2C probing (Plug and Play Displays), + set 'Enable DDC Support' to 'y'. To make this option appear, set + 'use VESA Generalized Timing Formula' to 'y'. + + f. If you want a framebuffer console, enable it under "Console Drivers" - f. Compile your kernel. + g. Compile your kernel. - g. Load the driver as described in section D and E. + h. Load the driver as described in section D and E. - Optional: - h. If you are going to run XFree86 with its native drivers, the - standard XFree86 4.1.0 and 4.2.0 drivers should work as is. - However, there's a bug in the XFree86 i810 drivers. It attempts - to use XAA even when switched to the console. This will crash - your server. I have a fix at this site: - - http://i810fb.sourceforge.net. - - You can either use the patch, or just replace - - /usr/X11R6/lib/modules/drivers/i810_drv.o - - with the one provided at the website. - i. Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver patch to see the chipset in action (or inaction :-). diff --git a/trunk/Documentation/fb/modedb.txt b/trunk/Documentation/fb/modedb.txt index e04458b319d5..4fcdb4cf4cca 100644 --- a/trunk/Documentation/fb/modedb.txt +++ b/trunk/Documentation/fb/modedb.txt @@ -20,12 +20,83 @@ in a video= option, fbmem considers that to be a global video mode option. Valid mode specifiers (mode_option argument): - x[-][@] + x[M][R][-][@][i][m] [-][@] with , , and decimal numbers and a string. Things between square brackets are optional. +If 'M' is specified in the mode_option argument (after and before + and , if specified) the timings will be calculated using +VESA(TM) Coordinated Video Timings instead of looking up the mode from a table. +If 'R' is specified, do a 'reduced blanking' calculation for digital displays. +If 'i' is specified, calculate for an interlaced mode. And if 'm' is +specified, add margins to the calculation (1.8% of xres rounded down to 8 +pixels and 1.8% of yres). + + Sample usage: 1024x768M@60m - CVT timing with margins + +***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** + +What is the VESA(TM) Coordinated Video Timings (CVT)? + +From the VESA(TM) Website: + + "The purpose of CVT is to provide a method for generating a consistent + and coordinated set of standard formats, display refresh rates, and + timing specifications for computer display products, both those + employing CRTs, and those using other display technologies. The + intention of CVT is to give both source and display manufacturers a + common set of tools to enable new timings to be developed in a + consistent manner that ensures greater compatibility." + +This is the third standard approved by VESA(TM) concerning video timings. The +first was the Discrete Video Timings (DVT) which is a collection of +pre-defined modes approved by VESA(TM). The second is the Generalized Timing +Formula (GTF) which is an algorithm to calculate the timings, given the +pixelclock, the horizontal sync frequency, or the vertical refresh rate. + +The GTF is limited by the fact that it is designed mainly for CRT displays. +It artificially increases the pixelclock because of its high blanking +requirement. This is inappropriate for digital display interface with its high +data rate which requires that it conserves the pixelclock as much as possible. +Also, GTF does not take into account the aspect ratio of the display. + +The CVT addresses these limitations. If used with CRT's, the formula used +is a derivation of GTF with a few modifications. If used with digital +displays, the "reduced blanking" calculation can be used. + +From the framebuffer subsystem perspective, new formats need not be added +to the global mode database whenever a new mode is released by display +manufacturers. Specifying for CVT will work for most, if not all, relatively +new CRT displays and probably with most flatpanels, if 'reduced blanking' +calculation is specified. (The CVT compatibility of the display can be +determined from its EDID. The version 1.3 of the EDID has extra 128-byte +blocks where additional timing information is placed. As of this time, there +is no support yet in the layer to parse this additional blocks.) + +CVT also introduced a new naming convention (should be seen from dmesg output): + + M[-R] + + where: pix = total amount of pixels in MB (xres x yres) + M = always present + a = aspect ratio (3 - 4:3; 4 - 5:4; 9 - 15:9, 16:9; A - 16:10) + -R = reduced blanking + + example: .48M3-R - 800x600 with reduced blanking + +Note: VESA(TM) has restrictions on what is a standard CVT timing: + + - aspect ratio can only be one of the above values + - acceptable refresh rates are 50, 60, 70 or 85 Hz only + - if reduced blanking, the refresh rate must be at 60Hz + +If one of the above are not satisfied, the kernel will print a warning but the +timings will still be calculated. + +***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** + To find a suitable video mode, you just call int __init fb_find_mode(struct fb_var_screeninfo *var, diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt index 363909056e46..b67189a8d8d4 100644 --- a/trunk/Documentation/feature-removal-schedule.txt +++ b/trunk/Documentation/feature-removal-schedule.txt @@ -17,32 +17,6 @@ Who: Greg Kroah-Hartman --------------------------- -What: ACPI S4bios support -When: May 2005 -Why: Noone uses it, and it probably does not work, anyway. swsusp is - faster, more reliable, and people are actually using it. -Who: Pavel Machek - ---------------------------- - -What: PCI Name Database (CONFIG_PCI_NAMES) -When: July 2005 -Why: It bloats the kernel unnecessarily, and is handled by userspace better - (pciutils supports it.) Will eliminate the need to try to keep the - pci.ids file in sync with the sf.net database all of the time. -Who: Greg Kroah-Hartman - ---------------------------- - -What: io_remap_page_range() (macro or function) -When: September 2005 -Why: Replaced by io_remap_pfn_range() which allows more memory space - addressabilty (by using a pfn) and supports sparc & sparc64 - iospace as part of the pfn. -Who: Randy Dunlap - ---------------------------- - What: RAW driver (CONFIG_RAW_DRIVER) When: December 2005 Why: declared obsolete since kernel 2.6.3 @@ -51,14 +25,6 @@ Who: Adrian Bunk --------------------------- -What: register_ioctl32_conversion() / unregister_ioctl32_conversion() -When: April 2005 -Why: Replaced by ->compat_ioctl in file_operations and other method - vecors. -Who: Andi Kleen , Christoph Hellwig - ---------------------------- - What: RCU API moves to EXPORT_SYMBOL_GPL When: April 2006 Files: include/linux/rcupdate.h, kernel/rcupdate.c @@ -74,14 +40,6 @@ Who: Paul E. McKenney --------------------------- -What: remove verify_area() -When: July 2006 -Files: Various uaccess.h headers. -Why: Deprecated and redundant. access_ok() should be used instead. -Who: Jesper Juhl - ---------------------------- - What: IEEE1394 Audio and Music Data Transmission Protocol driver, Connection Management Procedures driver When: November 2005 diff --git a/trunk/Documentation/filesystems/files.txt b/trunk/Documentation/filesystems/files.txt new file mode 100644 index 000000000000..8c206f4e0250 --- /dev/null +++ b/trunk/Documentation/filesystems/files.txt @@ -0,0 +1,123 @@ +File management in the Linux kernel +----------------------------------- + +This document describes how locking for files (struct file) +and file descriptor table (struct files) works. + +Up until 2.6.12, the file descriptor table has been protected +with a lock (files->file_lock) and reference count (files->count). +->file_lock protected accesses to all the file related fields +of the table. ->count was used for sharing the file descriptor +table between tasks cloned with CLONE_FILES flag. Typically +this would be the case for posix threads. As with the common +refcounting model in the kernel, the last task doing +a put_files_struct() frees the file descriptor (fd) table. +The files (struct file) themselves are protected using +reference count (->f_count). + +In the new lock-free model of file descriptor management, +the reference counting is similar, but the locking is +based on RCU. The file descriptor table contains multiple +elements - the fd sets (open_fds and close_on_exec, the +array of file pointers, the sizes of the sets and the array +etc.). In order for the updates to appear atomic to +a lock-free reader, all the elements of the file descriptor +table are in a separate structure - struct fdtable. +files_struct contains a pointer to struct fdtable through +which the actual fd table is accessed. Initially the +fdtable is embedded in files_struct itself. On a subsequent +expansion of fdtable, a new fdtable structure is allocated +and files->fdtab points to the new structure. The fdtable +structure is freed with RCU and lock-free readers either +see the old fdtable or the new fdtable making the update +appear atomic. Here are the locking rules for +the fdtable structure - + +1. All references to the fdtable must be done through + the files_fdtable() macro : + + struct fdtable *fdt; + + rcu_read_lock(); + + fdt = files_fdtable(files); + .... + if (n <= fdt->max_fds) + .... + ... + rcu_read_unlock(); + + files_fdtable() uses rcu_dereference() macro which takes care of + the memory barrier requirements for lock-free dereference. + The fdtable pointer must be read within the read-side + critical section. + +2. Reading of the fdtable as described above must be protected + by rcu_read_lock()/rcu_read_unlock(). + +3. For any update to the the fd table, files->file_lock must + be held. + +4. To look up the file structure given an fd, a reader + must use either fcheck() or fcheck_files() APIs. These + take care of barrier requirements due to lock-free lookup. + An example : + + struct file *file; + + rcu_read_lock(); + file = fcheck(fd); + if (file) { + ... + } + .... + rcu_read_unlock(); + +5. Handling of the file structures is special. Since the look-up + of the fd (fget()/fget_light()) are lock-free, it is possible + that look-up may race with the last put() operation on the + file structure. This is avoided using the rcuref APIs + on ->f_count : + + rcu_read_lock(); + file = fcheck_files(files, fd); + if (file) { + if (rcuref_inc_lf(&file->f_count)) + *fput_needed = 1; + else + /* Didn't get the reference, someone's freed */ + file = NULL; + } + rcu_read_unlock(); + .... + return file; + + rcuref_inc_lf() detects if refcounts is already zero or + goes to zero during increment. If it does, we fail + fget()/fget_light(). + +6. Since both fdtable and file structures can be looked up + lock-free, they must be installed using rcu_assign_pointer() + API. If they are looked up lock-free, rcu_dereference() + must be used. However it is advisable to use files_fdtable() + and fcheck()/fcheck_files() which take care of these issues. + +7. While updating, the fdtable pointer must be looked up while + holding files->file_lock. If ->file_lock is dropped, then + another thread expand the files thereby creating a new + fdtable and making the earlier fdtable pointer stale. + For example : + + spin_lock(&files->file_lock); + fd = locate_fd(files, file, start); + if (fd >= 0) { + /* locate_fd() may have expanded fdtable, load the ptr */ + fdt = files_fdtable(files); + FD_SET(fd, fdt->open_fds); + FD_CLR(fd, fdt->close_on_exec); + spin_unlock(&files->file_lock); + ..... + + Since locate_fd() can drop ->file_lock (and reacquire ->file_lock), + the fdtable pointer (fdt) must be loaded after locate_fd(). + diff --git a/trunk/Documentation/filesystems/fuse.txt b/trunk/Documentation/filesystems/fuse.txt new file mode 100644 index 000000000000..6b5741e651a2 --- /dev/null +++ b/trunk/Documentation/filesystems/fuse.txt @@ -0,0 +1,315 @@ +Definitions +~~~~~~~~~~~ + +Userspace filesystem: + + A filesystem in which data and metadata are provided by an ordinary + userspace process. The filesystem can be accessed normally through + the kernel interface. + +Filesystem daemon: + + The process(es) providing the data and metadata of the filesystem. + +Non-privileged mount (or user mount): + + A userspace filesystem mounted by a non-privileged (non-root) user. + The filesystem daemon is running with the privileges of the mounting + user. NOTE: this is not the same as mounts allowed with the "user" + option in /etc/fstab, which is not discussed here. + +Mount owner: + + The user who does the mounting. + +User: + + The user who is performing filesystem operations. + +What is FUSE? +~~~~~~~~~~~~~ + +FUSE is a userspace filesystem framework. It consists of a kernel +module (fuse.ko), a userspace library (libfuse.*) and a mount utility +(fusermount). + +One of the most important features of FUSE is allowing secure, +non-privileged mounts. This opens up new possibilities for the use of +filesystems. A good example is sshfs: a secure network filesystem +using the sftp protocol. + +The userspace library and utilities are available from the FUSE +homepage: + + http://fuse.sourceforge.net/ + +Mount options +~~~~~~~~~~~~~ + +'fd=N' + + The file descriptor to use for communication between the userspace + filesystem and the kernel. The file descriptor must have been + obtained by opening the FUSE device ('/dev/fuse'). + +'rootmode=M' + + The file mode of the filesystem's root in octal representation. + +'user_id=N' + + The numeric user id of the mount owner. + +'group_id=N' + + The numeric group id of the mount owner. + +'default_permissions' + + By default FUSE doesn't check file access permissions, the + filesystem is free to implement it's access policy or leave it to + the underlying file access mechanism (e.g. in case of network + filesystems). This option enables permission checking, restricting + access based on file mode. This is option is usually useful + together with the 'allow_other' mount option. + +'allow_other' + + This option overrides the security measure restricting file access + to the user mounting the filesystem. This option is by default only + allowed to root, but this restriction can be removed with a + (userspace) configuration option. + +'max_read=N' + + With this option the maximum size of read operations can be set. + The default is infinite. Note that the size of read requests is + limited anyway to 32 pages (which is 128kbyte on i386). + +How do non-privileged mounts work? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Since the mount() system call is a privileged operation, a helper +program (fusermount) is needed, which is installed setuid root. + +The implication of providing non-privileged mounts is that the mount +owner must not be able to use this capability to compromise the +system. Obvious requirements arising from this are: + + A) mount owner should not be able to get elevated privileges with the + help of the mounted filesystem + + B) mount owner should not get illegitimate access to information from + other users' and the super user's processes + + C) mount owner should not be able to induce undesired behavior in + other users' or the super user's processes + +How are requirements fulfilled? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + A) The mount owner could gain elevated privileges by either: + + 1) creating a filesystem containing a device file, then opening + this device + + 2) creating a filesystem containing a suid or sgid application, + then executing this application + + The solution is not to allow opening device files and ignore + setuid and setgid bits when executing programs. To ensure this + fusermount always adds "nosuid" and "nodev" to the mount options + for non-privileged mounts. + + B) If another user is accessing files or directories in the + filesystem, the filesystem daemon serving requests can record the + exact sequence and timing of operations performed. This + information is otherwise inaccessible to the mount owner, so this + counts as an information leak. + + The solution to this problem will be presented in point 2) of C). + + C) There are several ways in which the mount owner can induce + undesired behavior in other users' processes, such as: + + 1) mounting a filesystem over a file or directory which the mount + owner could otherwise not be able to modify (or could only + make limited modifications). + + This is solved in fusermount, by checking the access + permissions on the mountpoint and only allowing the mount if + the mount owner can do unlimited modification (has write + access to the mountpoint, and mountpoint is not a "sticky" + directory) + + 2) Even if 1) is solved the mount owner can change the behavior + of other users' processes. + + i) It can slow down or indefinitely delay the execution of a + filesystem operation creating a DoS against the user or the + whole system. For example a suid application locking a + system file, and then accessing a file on the mount owner's + filesystem could be stopped, and thus causing the system + file to be locked forever. + + ii) It can present files or directories of unlimited length, or + directory structures of unlimited depth, possibly causing a + system process to eat up diskspace, memory or other + resources, again causing DoS. + + The solution to this as well as B) is not to allow processes + to access the filesystem, which could otherwise not be + monitored or manipulated by the mount owner. Since if the + mount owner can ptrace a process, it can do all of the above + without using a FUSE mount, the same criteria as used in + ptrace can be used to check if a process is allowed to access + the filesystem or not. + + Note that the ptrace check is not strictly necessary to + prevent B/2/i, it is enough to check if mount owner has enough + privilege to send signal to the process accessing the + filesystem, since SIGSTOP can be used to get a similar effect. + +I think these limitations are unacceptable? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If a sysadmin trusts the users enough, or can ensure through other +measures, that system processes will never enter non-privileged +mounts, it can relax the last limitation with a "user_allow_other" +config option. If this config option is set, the mounting user can +add the "allow_other" mount option which disables the check for other +users' processes. + +Kernel - userspace interface +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following diagram shows how a filesystem operation (in this +example unlink) is performed in FUSE. + +NOTE: everything in this description is greatly simplified + + | "rm /mnt/fuse/file" | FUSE filesystem daemon + | | + | | >sys_read() + | | >fuse_dev_read() + | | >request_wait() + | | [sleep on fc->waitq] + | | + | >sys_unlink() | + | >fuse_unlink() | + | [get request from | + | fc->unused_list] | + | >request_send() | + | [queue req on fc->pending] | + | [wake up fc->waitq] | [woken up] + | >request_wait_answer() | + | [sleep on req->waitq] | + | | pending] + | | [copy req to read buffer] + | | [add req to fc->processing] + | | sys_write() + | | >fuse_dev_write() + | | [look up req in fc->processing] + | | [remove from fc->processing] + | | [copy write buffer to req] + | [woken up] | [wake up req->waitq] + | | unused_list] | + | sys_unlink("/mnt/fuse/file") | + | [acquire inode semaphore | + | for "file"] | + | >fuse_unlink() | + | [sleep on req->waitq] | + | | sys_unlink("/mnt/fuse/file") + | | [acquire inode semaphore + | | for "file"] + | | *DEADLOCK* + +The solution for this is to allow requests to be interrupted while +they are in userspace: + + | [interrupted by signal] | + | fuse_unlink() + | | [queue req on fc->pending] + | | [wake up fc->waitq] + | | [sleep on req->waitq] + +If the filesystem daemon was single threaded, this will stop here, +since there's no other thread to dequeue and execute the request. +In this case the solution is to kill the FUSE daemon as well. If +there are multiple serving threads, you just have to kill them as +long as any remain. + +Moral: a filesystem which deadlocks, can soon find itself dead. + +Scenario 2 - Tricky deadlock +---------------------------- + +This one needs a carefully crafted filesystem. It's a variation on +the above, only the call back to the filesystem is not explicit, +but is caused by a pagefault. + + | Kamikaze filesystem thread 1 | Kamikaze filesystem thread 2 + | | + | [fd = open("/mnt/fuse/file")] | [request served normally] + | [mmap fd to 'addr'] | + | [close fd] | [FLUSH triggers 'magic' flag] + | [read a byte from addr] | + | >do_page_fault() | + | [find or create page] | + | [lock page] | + | >fuse_readpage() | + | [queue READ request] | + | [sleep on req->waitq] | + | | [read request to buffer] + | | [create reply header before addr] + | | >sys_write(addr - headerlength) + | | >fuse_dev_write() + | | [look up req in fc->processing] + | | [remove from fc->processing] + | | [copy write buffer to req] + | | >do_page_fault() + | | [find or create page] + | | [lock page] + | | * DEADLOCK * + +Solution is again to let the the request be interrupted (not +elaborated further). + +An additional problem is that while the write buffer is being +copied to the request, the request must not be interrupted. This +is because the destination address of the copy may not be valid +after the request is interrupted. + +This is solved with doing the copy atomically, and allowing +interruption while the page(s) belonging to the write buffer are +faulted with get_user_pages(). The 'req->locked' flag indicates +when the copy is taking place, and interruption is delayed until +this flag is unset. + diff --git a/trunk/Documentation/filesystems/ntfs.txt b/trunk/Documentation/filesystems/ntfs.txt index eef4aca0c753..a5fbc8e897fa 100644 --- a/trunk/Documentation/filesystems/ntfs.txt +++ b/trunk/Documentation/filesystems/ntfs.txt @@ -439,6 +439,18 @@ ChangeLog Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog. +2.1.24: + - Support journals ($LogFile) which have been modified by chkdsk. This + means users can boot into Windows after we marked the volume dirty. + The Windows boot will run chkdsk and then reboot. The user can then + immediately boot into Linux rather than having to do a full Windows + boot first before rebooting into Linux and we will recognize such a + journal and empty it as it is clean by definition. + - Support journals ($LogFile) with only one restart page as well as + journals with two different restart pages. We sanity check both and + either use the only sane one or the more recent one of the two in the + case that both are valid. + - Lots of bug fixes and enhancements across the board. 2.1.23: - Stamp the user space journal, aka transaction log, aka $UsnJrnl, if it is present and active thus telling Windows and applications using diff --git a/trunk/Documentation/filesystems/proc.txt b/trunk/Documentation/filesystems/proc.txt index 5024ba7a592c..d4773565ea2f 100644 --- a/trunk/Documentation/filesystems/proc.txt +++ b/trunk/Documentation/filesystems/proc.txt @@ -1241,16 +1241,38 @@ swap-intensive. overcommit_memory ----------------- -This file contains one value. The following algorithm is used to decide if -there's enough memory: if the value of overcommit_memory is positive, then -there's always enough memory. This is a useful feature, since programs often -malloc() huge amounts of memory 'just in case', while they only use a small -part of it. Leaving this value at 0 will lead to the failure of such a huge -malloc(), when in fact the system has enough memory for the program to run. - -On the other hand, enabling this feature can cause you to run out of memory -and thrash the system to death, so large and/or important servers will want to -set this value to 0. +Controls overcommit of system memory, possibly allowing processes +to allocate (but not use) more memory than is actually available. + + +0 - Heuristic overcommit handling. Obvious overcommits of + address space are refused. Used for a typical system. It + ensures a seriously wild allocation fails while allowing + overcommit to reduce swap usage. root is allowed to + allocate slighly more memory in this mode. This is the + default. + +1 - Always overcommit. Appropriate for some scientific + applications. + +2 - Don't overcommit. The total address space commit + for the system is not permitted to exceed swap plus a + configurable percentage (default is 50) of physical RAM. + Depending on the percentage you use, in most situations + this means a process will not be killed while attempting + to use already-allocated memory but will receive errors + on memory allocation as appropriate. + +overcommit_ratio +---------------- + +Percentage of physical memory size to include in overcommit calculations +(see above.) + +Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100) + + swapspace = total size of all swap areas + physmem = size of physical memory in system nr_hugepages and hugetlb_shm_group ---------------------------------- diff --git a/trunk/Documentation/filesystems/relayfs.txt b/trunk/Documentation/filesystems/relayfs.txt new file mode 100644 index 000000000000..d803abed29f0 --- /dev/null +++ b/trunk/Documentation/filesystems/relayfs.txt @@ -0,0 +1,362 @@ + +relayfs - a high-speed data relay filesystem +============================================ + +relayfs is a filesystem designed to provide an efficient mechanism for +tools and facilities to relay large and potentially sustained streams +of data from kernel space to user space. + +The main abstraction of relayfs is the 'channel'. A channel consists +of a set of per-cpu kernel buffers each represented by a file in the +relayfs filesystem. Kernel clients write into a channel using +efficient write functions which automatically log to the current cpu's +channel buffer. User space applications mmap() the per-cpu files and +retrieve the data as it becomes available. + +The format of the data logged into the channel buffers is completely +up to the relayfs client; relayfs does however provide hooks which +allow clients to impose some structure on the buffer data. Nor does +relayfs implement any form of data filtering - this also is left to +the client. The purpose is to keep relayfs as simple as possible. + +This document provides an overview of the relayfs API. The details of +the function parameters are documented along with the functions in the +filesystem code - please see that for details. + +Semantics +========= + +Each relayfs channel has one buffer per CPU, each buffer has one or +more sub-buffers. Messages are written to the first sub-buffer until +it is too full to contain a new message, in which case it it is +written to the next (if available). Messages are never split across +sub-buffers. At this point, userspace can be notified so it empties +the first sub-buffer, while the kernel continues writing to the next. + +When notified that a sub-buffer is full, the kernel knows how many +bytes of it are padding i.e. unused. Userspace can use this knowledge +to copy only valid data. + +After copying it, userspace can notify the kernel that a sub-buffer +has been consumed. + +relayfs can operate in a mode where it will overwrite data not yet +collected by userspace, and not wait for it to consume it. + +relayfs itself does not provide for communication of such data between +userspace and kernel, allowing the kernel side to remain simple and not +impose a single interface on userspace. It does provide a separate +helper though, described below. + +klog, relay-app & librelay +========================== + +relayfs itself is ready to use, but to make things easier, two +additional systems are provided. klog is a simple wrapper to make +writing formatted text or raw data to a channel simpler, regardless of +whether a channel to write into exists or not, or whether relayfs is +compiled into the kernel or is configured as a module. relay-app is +the kernel counterpart of userspace librelay.c, combined these two +files provide glue to easily stream data to disk, without having to +bother with housekeeping. klog and relay-app can be used together, +with klog providing high-level logging functions to the kernel and +relay-app taking care of kernel-user control and disk-logging chores. + +It is possible to use relayfs without relay-app & librelay, but you'll +have to implement communication between userspace and kernel, allowing +both to convey the state of buffers (full, empty, amount of padding). + +klog, relay-app and librelay can be found in the relay-apps tarball on +http://relayfs.sourceforge.net + +The relayfs user space API +========================== + +relayfs implements basic file operations for user space access to +relayfs channel buffer data. Here are the file operations that are +available and some comments regarding their behavior: + +open() enables user to open an _existing_ buffer. + +mmap() results in channel buffer being mapped into the caller's + memory space. Note that you can't do a partial mmap - you must + map the entire file, which is NRBUF * SUBBUFSIZE. + +read() read the contents of a channel buffer. The bytes read are + 'consumed' by the reader i.e. they won't be available again + to subsequent reads. If the channel is being used in + no-overwrite mode (the default), it can be read at any time + even if there's an active kernel writer. If the channel is + being used in overwrite mode and there are active channel + writers, results may be unpredictable - users should make + sure that all logging to the channel has ended before using + read() with overwrite mode. + +poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are + notified when sub-buffer boundaries are crossed. + +close() decrements the channel buffer's refcount. When the refcount + reaches 0 i.e. when no process or kernel client has the buffer + open, the channel buffer is freed. + + +In order for a user application to make use of relayfs files, the +relayfs filesystem must be mounted. For example, + + mount -t relayfs relayfs /mnt/relay + +NOTE: relayfs doesn't need to be mounted for kernel clients to create + or use channels - it only needs to be mounted when user space + applications need access to the buffer data. + + +The relayfs kernel API +====================== + +Here's a summary of the API relayfs provides to in-kernel clients: + + + channel management functions: + + relay_open(base_filename, parent, subbuf_size, n_subbufs, + callbacks) + relay_close(chan) + relay_flush(chan) + relay_reset(chan) + relayfs_create_dir(name, parent) + relayfs_remove_dir(dentry) + + channel management typically called on instigation of userspace: + + relay_subbufs_consumed(chan, cpu, subbufs_consumed) + + write functions: + + relay_write(chan, data, length) + __relay_write(chan, data, length) + relay_reserve(chan, length) + + callbacks: + + subbuf_start(buf, subbuf, prev_subbuf, prev_padding) + buf_mapped(buf, filp) + buf_unmapped(buf, filp) + + helper functions: + + relay_buf_full(buf) + subbuf_start_reserve(buf, length) + + +Creating a channel +------------------ + +relay_open() is used to create a channel, along with its per-cpu +channel buffers. Each channel buffer will have an associated file +created for it in the relayfs filesystem, which can be opened and +mmapped from user space if desired. The files are named +basename0...basenameN-1 where N is the number of online cpus, and by +default will be created in the root of the filesystem. If you want a +directory structure to contain your relayfs files, you can create it +with relayfs_create_dir() and pass the parent directory to +relay_open(). Clients are responsible for cleaning up any directory +structure they create when the channel is closed - use +relayfs_remove_dir() for that. + +The total size of each per-cpu buffer is calculated by multiplying the +number of sub-buffers by the sub-buffer size passed into relay_open(). +The idea behind sub-buffers is that they're basically an extension of +double-buffering to N buffers, and they also allow applications to +easily implement random-access-on-buffer-boundary schemes, which can +be important for some high-volume applications. The number and size +of sub-buffers is completely dependent on the application and even for +the same application, different conditions will warrant different +values for these parameters at different times. Typically, the right +values to use are best decided after some experimentation; in general, +though, it's safe to assume that having only 1 sub-buffer is a bad +idea - you're guaranteed to either overwrite data or lose events +depending on the channel mode being used. + +Channel 'modes' +--------------- + +relayfs channels can be used in either of two modes - 'overwrite' or +'no-overwrite'. The mode is entirely determined by the implementation +of the subbuf_start() callback, as described below. In 'overwrite' +mode, also known as 'flight recorder' mode, writes continuously cycle +around the buffer and will never fail, but will unconditionally +overwrite old data regardless of whether it's actually been consumed. +In no-overwrite mode, writes will fail i.e. data will be lost, if the +number of unconsumed sub-buffers equals the total number of +sub-buffers in the channel. It should be clear that if there is no +consumer or if the consumer can't consume sub-buffers fast enought, +data will be lost in either case; the only difference is whether data +is lost from the beginning or the end of a buffer. + +As explained above, a relayfs channel is made of up one or more +per-cpu channel buffers, each implemented as a circular buffer +subdivided into one or more sub-buffers. Messages are written into +the current sub-buffer of the channel's current per-cpu buffer via the +write functions described below. Whenever a message can't fit into +the current sub-buffer, because there's no room left for it, the +client is notified via the subbuf_start() callback that a switch to a +new sub-buffer is about to occur. The client uses this callback to 1) +initialize the next sub-buffer if appropriate 2) finalize the previous +sub-buffer if appropriate and 3) return a boolean value indicating +whether or not to actually go ahead with the sub-buffer switch. + +To implement 'no-overwrite' mode, the userspace client would provide +an implementation of the subbuf_start() callback something like the +following: + +static int subbuf_start(struct rchan_buf *buf, + void *subbuf, + void *prev_subbuf, + unsigned int prev_padding) +{ + if (prev_subbuf) + *((unsigned *)prev_subbuf) = prev_padding; + + if (relay_buf_full(buf)) + return 0; + + subbuf_start_reserve(buf, sizeof(unsigned int)); + + return 1; +} + +If the current buffer is full i.e. all sub-buffers remain unconsumed, +the callback returns 0 to indicate that the buffer switch should not +occur yet i.e. until the consumer has had a chance to read the current +set of ready sub-buffers. For the relay_buf_full() function to make +sense, the consumer is reponsible for notifying relayfs when +sub-buffers have been consumed via relay_subbufs_consumed(). Any +subsequent attempts to write into the buffer will again invoke the +subbuf_start() callback with the same parameters; only when the +consumer has consumed one or more of the ready sub-buffers will +relay_buf_full() return 0, in which case the buffer switch can +continue. + +The implementation of the subbuf_start() callback for 'overwrite' mode +would be very similar: + +static int subbuf_start(struct rchan_buf *buf, + void *subbuf, + void *prev_subbuf, + unsigned int prev_padding) +{ + if (prev_subbuf) + *((unsigned *)prev_subbuf) = prev_padding; + + subbuf_start_reserve(buf, sizeof(unsigned int)); + + return 1; +} + +In this case, the relay_buf_full() check is meaningless and the +callback always returns 1, causing the buffer switch to occur +unconditionally. It's also meaningless for the client to use the +relay_subbufs_consumed() function in this mode, as it's never +consulted. + +The default subbuf_start() implementation, used if the client doesn't +define any callbacks, or doesn't define the subbuf_start() callback, +implements the simplest possible 'no-overwrite' mode i.e. it does +nothing but return 0. + +Header information can be reserved at the beginning of each sub-buffer +by calling the subbuf_start_reserve() helper function from within the +subbuf_start() callback. This reserved area can be used to store +whatever information the client wants. In the example above, room is +reserved in each sub-buffer to store the padding count for that +sub-buffer. This is filled in for the previous sub-buffer in the +subbuf_start() implementation; the padding value for the previous +sub-buffer is passed into the subbuf_start() callback along with a +pointer to the previous sub-buffer, since the padding value isn't +known until a sub-buffer is filled. The subbuf_start() callback is +also called for the first sub-buffer when the channel is opened, to +give the client a chance to reserve space in it. In this case the +previous sub-buffer pointer passed into the callback will be NULL, so +the client should check the value of the prev_subbuf pointer before +writing into the previous sub-buffer. + +Writing to a channel +-------------------- + +kernel clients write data into the current cpu's channel buffer using +relay_write() or __relay_write(). relay_write() is the main logging +function - it uses local_irqsave() to protect the buffer and should be +used if you might be logging from interrupt context. If you know +you'll never be logging from interrupt context, you can use +__relay_write(), which only disables preemption. These functions +don't return a value, so you can't determine whether or not they +failed - the assumption is that you wouldn't want to check a return +value in the fast logging path anyway, and that they'll always succeed +unless the buffer is full and no-overwrite mode is being used, in +which case you can detect a failed write in the subbuf_start() +callback by calling the relay_buf_full() helper function. + +relay_reserve() is used to reserve a slot in a channel buffer which +can be written to later. This would typically be used in applications +that need to write directly into a channel buffer without having to +stage data in a temporary buffer beforehand. Because the actual write +may not happen immediately after the slot is reserved, applications +using relay_reserve() can keep a count of the number of bytes actually +written, either in space reserved in the sub-buffers themselves or as +a separate array. See the 'reserve' example in the relay-apps tarball +at http://relayfs.sourceforge.net for an example of how this can be +done. Because the write is under control of the client and is +separated from the reserve, relay_reserve() doesn't protect the buffer +at all - it's up to the client to provide the appropriate +synchronization when using relay_reserve(). + +Closing a channel +----------------- + +The client calls relay_close() when it's finished using the channel. +The channel and its associated buffers are destroyed when there are no +longer any references to any of the channel buffers. relay_flush() +forces a sub-buffer switch on all the channel buffers, and can be used +to finalize and process the last sub-buffers before the channel is +closed. + +Misc +---- + +Some applications may want to keep a channel around and re-use it +rather than open and close a new channel for each use. relay_reset() +can be used for this purpose - it resets a channel to its initial +state without reallocating channel buffer memory or destroying +existing mappings. It should however only be called when it's safe to +do so i.e. when the channel isn't currently being written to. + +Finally, there are a couple of utility callbacks that can be used for +different purposes. buf_mapped() is called whenever a channel buffer +is mmapped from user space and buf_unmapped() is called when it's +unmapped. The client can use this notification to trigger actions +within the kernel application, such as enabling/disabling logging to +the channel. + + +Resources +========= + +For news, example code, mailing list, etc. see the relayfs homepage: + + http://relayfs.sourceforge.net + + +Credits +======= + +The ideas and specs for relayfs came about as a result of discussions +on tracing involving the following: + +Michel Dagenais +Richard Moore +Bob Wisniewski +Karim Yaghmour +Tom Zanussi + +Also thanks to Hubertus Franke for a lot of useful suggestions and bug +reports. diff --git a/trunk/Documentation/filesystems/v9fs.txt b/trunk/Documentation/filesystems/v9fs.txt new file mode 100644 index 000000000000..4e92feb6b507 --- /dev/null +++ b/trunk/Documentation/filesystems/v9fs.txt @@ -0,0 +1,95 @@ + V9FS: 9P2000 for Linux + ====================== + +ABOUT +===== + +v9fs is a Unix implementation of the Plan 9 9p remote filesystem protocol. + +This software was originally developed by Ron Minnich +and Maya Gokhale . Additional development by Greg Watson + and most recently Eric Van Hensbergen + and Latchesar Ionkov . + +USAGE +===== + +For remote file server: + + mount -t 9P 10.10.1.2 /mnt/9 + +For Plan 9 From User Space applications (http://swtch.com/plan9) + + mount -t 9P `namespace`/acme /mnt/9 -o proto=unix,name=$USER + +OPTIONS +======= + + proto=name select an alternative transport. Valid options are + currently: + unix - specifying a named pipe mount point + tcp - specifying a normal TCP/IP connection + fd - used passed file descriptors for connection + (see rfdno and wfdno) + + name=name user name to attempt mount as on the remote server. The + server may override or ignore this value. Certain user + names may require authentication. + + aname=name aname specifies the file tree to access when the server is + offering several exported file systems. + + debug=n specifies debug level. The debug level is a bitmask. + 0x01 = display verbose error messages + 0x02 = developer debug (DEBUG_CURRENT) + 0x04 = display 9P trace + 0x08 = display VFS trace + 0x10 = display Marshalling debug + 0x20 = display RPC debug + 0x40 = display transport debug + 0x80 = display allocation debug + + rfdno=n the file descriptor for reading with proto=fd + + wfdno=n the file descriptor for writing with proto=fd + + maxdata=n the number of bytes to use for 9P packet payload (msize) + + port=n port to connect to on the remote server + + timeout=n request timeouts (in ms) (default 60000ms) + + noextend force legacy mode (no 9P2000.u semantics) + + uid attempt to mount as a particular uid + + gid attempt to mount with a particular gid + + afid security channel - used by Plan 9 authentication protocols + + nodevmap do not map special files - represent them as normal files. + This can be used to share devices/named pipes/sockets between + hosts. This functionality will be expanded in later versions. + +RESOURCES +========= + +The Linux version of the 9P server, along with some client-side utilities +can be found at http://v9fs.sf.net (along with a CVS repository of the +development branch of this module). There are user and developer mailing +lists here, as well as a bug-tracker. + +For more information on the Plan 9 Operating System check out +http://plan9.bell-labs.com/plan9 + +For information on Plan 9 from User Space (Plan 9 applications and libraries +ported to Linux/BSD/OSX/etc) check out http://swtch.com/plan9 + + +STATUS +====== + +The 2.6 kernel support is working on PPC and x86. + +PLEASE USE THE SOURCEFORGE BUG-TRACKER TO REPORT PROBLEMS. + diff --git a/trunk/Documentation/filesystems/vfs.txt b/trunk/Documentation/filesystems/vfs.txt index 3f318dd44c77..f042c12e0ed2 100644 --- a/trunk/Documentation/filesystems/vfs.txt +++ b/trunk/Documentation/filesystems/vfs.txt @@ -1,35 +1,27 @@ -/* -*- auto-fill -*- */ - Overview of the Virtual File System + Overview of the Linux Virtual File System - Richard Gooch + Original author: Richard Gooch - 5-JUL-1999 + Last updated on August 25, 2005 + Copyright (C) 1999 Richard Gooch + Copyright (C) 2005 Pekka Enberg -Conventions used in this document
-================================= + This file is released under the GPLv2. -Each section in this document will have the string "
" at the -right-hand side of the section title. Each subsection will have -"" at the right-hand side. These strings are meant to make -it easier to search through the document. -NOTE that the master copy of this document is available online at: -http://www.atnf.csiro.au/~rgooch/linux/docs/vfs.txt - - -What is it?
+What is it? =========== The Virtual File System (otherwise known as the Virtual Filesystem Switch) is the software layer in the kernel that provides the filesystem interface to userspace programs. It also provides an abstraction within the kernel which allows different filesystem -implementations to co-exist. +implementations to coexist. -A Quick Look At How It Works
+A Quick Look At How It Works ============================ In this section I'll briefly describe how things work, before @@ -38,7 +30,8 @@ when user programs open and manipulate files, and then look from the other view which is how a filesystem is supported and subsequently mounted. -Opening a File + +Opening a File -------------- The VFS implements the open(2), stat(2), chmod(2) and similar system @@ -77,7 +70,7 @@ back to userspace. Opening a file requires another operation: allocation of a file structure (this is the kernel-side implementation of file -descriptors). The freshly allocated file structure is initialised with +descriptors). The freshly allocated file structure is initialized with a pointer to the dentry and a set of file operation member functions. These are taken from the inode data. The open() file method is then called so the specific filesystem implementation can do it's work. You @@ -102,7 +95,8 @@ filesystem or driver code at the same time, on different processors. You should ensure that access to shared resources is protected by appropriate locks. -Registering and Mounting a Filesystem + +Registering and Mounting a Filesystem ------------------------------------- If you want to support a new kind of filesystem in the kernel, all you @@ -123,17 +117,21 @@ updated to point to the root inode for the new filesystem. It's now time to look at things in more detail. -struct file_system_type
+struct file_system_type ======================= -This describes the filesystem. As of kernel 2.1.99, the following +This describes the filesystem. As of kernel 2.6.13, the following members are defined: struct file_system_type { const char *name; int fs_flags; - struct super_block *(*read_super) (struct super_block *, void *, int); - struct file_system_type * next; + struct super_block *(*get_sb) (struct file_system_type *, int, + const char *, void *); + void (*kill_sb) (struct super_block *); + struct module *owner; + struct file_system_type * next; + struct list_head fs_supers; }; name: the name of the filesystem type, such as "ext2", "iso9660", @@ -141,51 +139,97 @@ struct file_system_type { fs_flags: various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.) - read_super: the method to call when a new instance of this + get_sb: the method to call when a new instance of this filesystem should be mounted - next: for internal VFS use: you should initialise this to NULL + kill_sb: the method to call when an instance of this filesystem + should be unmounted + + owner: for internal VFS use: you should initialize this to THIS_MODULE in + most cases. -The read_super() method has the following arguments: + next: for internal VFS use: you should initialize this to NULL + +The get_sb() method has the following arguments: struct super_block *sb: the superblock structure. This is partially - initialised by the VFS and the rest must be initialised by the - read_super() method + initialized by the VFS and the rest must be initialized by the + get_sb() method + + int flags: mount flags + + const char *dev_name: the device name we are mounting. void *data: arbitrary mount options, usually comes as an ASCII string int silent: whether or not to be silent on error -The read_super() method must determine if the block device specified +The get_sb() method must determine if the block device specified in the superblock contains a filesystem of the type the method supports. On success the method returns the superblock pointer, on failure it returns NULL. The most interesting member of the superblock structure that the -read_super() method fills in is the "s_op" field. This is a pointer to +get_sb() method fills in is the "s_op" field. This is a pointer to a "struct super_operations" which describes the next level of the filesystem implementation. +Usually, a filesystem uses generic one of the generic get_sb() +implementations and provides a fill_super() method instead. The +generic methods are: + + get_sb_bdev: mount a filesystem residing on a block device -struct super_operations
+ get_sb_nodev: mount a filesystem that is not backed by a device + + get_sb_single: mount a filesystem which shares the instance between + all mounts + +A fill_super() method implementation has the following arguments: + + struct super_block *sb: the superblock structure. The method fill_super() + must initialize this properly. + + void *data: arbitrary mount options, usually comes as an ASCII + string + + int silent: whether or not to be silent on error + + +struct super_operations ======================= This describes how the VFS can manipulate the superblock of your -filesystem. As of kernel 2.1.99, the following members are defined: +filesystem. As of kernel 2.6.13, the following members are defined: struct super_operations { - void (*read_inode) (struct inode *); - int (*write_inode) (struct inode *, int); - void (*put_inode) (struct inode *); - void (*drop_inode) (struct inode *); - void (*delete_inode) (struct inode *); - int (*notify_change) (struct dentry *, struct iattr *); - void (*put_super) (struct super_block *); - void (*write_super) (struct super_block *); - int (*statfs) (struct super_block *, struct statfs *, int); - int (*remount_fs) (struct super_block *, int *, char *); - void (*clear_inode) (struct inode *); + struct inode *(*alloc_inode)(struct super_block *sb); + void (*destroy_inode)(struct inode *); + + void (*read_inode) (struct inode *); + + void (*dirty_inode) (struct inode *); + int (*write_inode) (struct inode *, int); + void (*put_inode) (struct inode *); + void (*drop_inode) (struct inode *); + void (*delete_inode) (struct inode *); + void (*put_super) (struct super_block *); + void (*write_super) (struct super_block *); + int (*sync_fs)(struct super_block *sb, int wait); + void (*write_super_lockfs) (struct super_block *); + void (*unlockfs) (struct super_block *); + int (*statfs) (struct super_block *, struct kstatfs *); + int (*remount_fs) (struct super_block *, int *, char *); + void (*clear_inode) (struct inode *); + void (*umount_begin) (struct super_block *); + + void (*sync_inodes) (struct super_block *sb, + struct writeback_control *wbc); + int (*show_options)(struct seq_file *, struct vfsmount *); + + ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); + ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); }; All methods are called without any locks being held, unless otherwise @@ -193,43 +237,62 @@ noted. This means that most methods can block safely. All methods are only called from a process context (i.e. not from an interrupt handler or bottom half). + alloc_inode: this method is called by inode_alloc() to allocate memory + for struct inode and initialize it. + + destroy_inode: this method is called by destroy_inode() to release + resources allocated for struct inode. + read_inode: this method is called to read a specific inode from the - mounted filesystem. The "i_ino" member in the "struct inode" - will be initialised by the VFS to indicate which inode to - read. Other members are filled in by this method + mounted filesystem. The i_ino member in the struct inode is + initialized by the VFS to indicate which inode to read. Other + members are filled in by this method. + + You can set this to NULL and use iget5_locked() instead of iget() + to read inodes. This is necessary for filesystems for which the + inode number is not sufficient to identify an inode. + + dirty_inode: this method is called by the VFS to mark an inode dirty. write_inode: this method is called when the VFS needs to write an inode to disc. The second parameter indicates whether the write should be synchronous or not, not all filesystems check this flag. put_inode: called when the VFS inode is removed from the inode - cache. This method is optional + cache. drop_inode: called when the last access to the inode is dropped, with the inode_lock spinlock held. - This method should be either NULL (normal unix filesystem + This method should be either NULL (normal UNIX filesystem semantics) or "generic_delete_inode" (for filesystems that do not want to cache inodes - causing "delete_inode" to always be called regardless of the value of i_nlink) - The "generic_delete_inode()" behaviour is equivalent to the + The "generic_delete_inode()" behavior is equivalent to the old practice of using "force_delete" in the put_inode() case, but does not have the races that the "force_delete()" approach had. delete_inode: called when the VFS wants to delete an inode - notify_change: called when VFS inode attributes are changed. If this - is NULL the VFS falls back to the write_inode() method. This - is called with the kernel lock held - put_super: called when the VFS wishes to free the superblock (i.e. unmount). This is called with the superblock lock held write_super: called when the VFS superblock needs to be written to disc. This method is optional + sync_fs: called when VFS is writing out all dirty data associated with + a superblock. The second parameter indicates whether the method + should wait until the write out has been completed. Optional. + + write_super_lockfs: called when VFS is locking a filesystem and forcing + it into a consistent state. This function is currently used by the + Logical Volume Manager (LVM). + + unlockfs: called when VFS is unlocking a filesystem and making it writable + again. + statfs: called when the VFS needs to get filesystem statistics. This is called with the kernel lock held @@ -238,21 +301,31 @@ or bottom half). clear_inode: called then the VFS clears the inode. Optional + umount_begin: called when the VFS is unmounting a filesystem. + + sync_inodes: called when the VFS is writing out dirty data associated with + a superblock. + + show_options: called by the VFS to show mount options for /proc//mounts. + + quota_read: called by the VFS to read from filesystem quota file. + + quota_write: called by the VFS to write to filesystem quota file. + The read_inode() method is responsible for filling in the "i_op" field. This is a pointer to a "struct inode_operations" which describes the methods that can be performed on individual inodes. -struct inode_operations
+struct inode_operations ======================= This describes how the VFS can manipulate an inode in your -filesystem. As of kernel 2.1.99, the following members are defined: +filesystem. As of kernel 2.6.13, the following members are defined: struct inode_operations { - struct file_operations * default_file_ops; - int (*create) (struct inode *,struct dentry *,int); - int (*lookup) (struct inode *,struct dentry *); + int (*create) (struct inode *,struct dentry *,int, struct nameidata *); + struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *); int (*link) (struct dentry *,struct inode *,struct dentry *); int (*unlink) (struct inode *,struct dentry *); int (*symlink) (struct inode *,struct dentry *,const char *); @@ -261,25 +334,22 @@ struct inode_operations { int (*mknod) (struct inode *,struct dentry *,int,dev_t); int (*rename) (struct inode *, struct dentry *, struct inode *, struct dentry *); - int (*readlink) (struct dentry *, char *,int); - struct dentry * (*follow_link) (struct dentry *, struct dentry *); - int (*readpage) (struct file *, struct page *); - int (*writepage) (struct page *page, struct writeback_control *wbc); - int (*bmap) (struct inode *,int); + int (*readlink) (struct dentry *, char __user *,int); + void * (*follow_link) (struct dentry *, struct nameidata *); + void (*put_link) (struct dentry *, struct nameidata *, void *); void (*truncate) (struct inode *); - int (*permission) (struct inode *, int); - int (*smap) (struct inode *,int); - int (*updatepage) (struct file *, struct page *, const char *, - unsigned long, unsigned int, int); - int (*revalidate) (struct dentry *); + int (*permission) (struct inode *, int, struct nameidata *); + int (*setattr) (struct dentry *, struct iattr *); + int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *); + int (*setxattr) (struct dentry *, const char *,const void *,size_t,int); + ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); + ssize_t (*listxattr) (struct dentry *, char *, size_t); + int (*removexattr) (struct dentry *, const char *); }; Again, all methods are called without any locks being held, unless otherwise noted. - default_file_ops: this is a pointer to a "struct file_operations" - which describes how to open and then manipulate open files - create: called by the open(2) and creat(2) system calls. Only required if you want to support regular files. The dentry you get should not have an inode (i.e. it should be a negative @@ -328,31 +398,143 @@ otherwise noted. you want to support reading symbolic links follow_link: called by the VFS to follow a symbolic link to the - inode it points to. Only required if you want to support - symbolic links + inode it points to. Only required if you want to support + symbolic links. This function returns a void pointer cookie + that is passed to put_link(). + + put_link: called by the VFS to release resources allocated by + follow_link(). The cookie returned by follow_link() is passed to + to this function as the last parameter. It is used by filesystems + such as NFS where page cache is not stable (i.e. page that was + installed when the symbolic link walk started might not be in the + page cache at the end of the walk). + + truncate: called by the VFS to change the size of a file. The i_size + field of the inode is set to the desired size by the VFS before + this function is called. This function is called by the truncate(2) + system call and related functionality. + + permission: called by the VFS to check for access rights on a POSIX-like + filesystem. + + setattr: called by the VFS to set attributes for a file. This function is + called by chmod(2) and related system calls. + + getattr: called by the VFS to get attributes of a file. This function is + called by stat(2) and related system calls. + + setxattr: called by the VFS to set an extended attribute for a file. + Extended attribute is a name:value pair associated with an inode. This + function is called by setxattr(2) system call. + + getxattr: called by the VFS to retrieve the value of an extended attribute + name. This function is called by getxattr(2) function call. + + listxattr: called by the VFS to list all extended attributes for a given + file. This function is called by listxattr(2) system call. + + removexattr: called by the VFS to remove an extended attribute from a file. + This function is called by removexattr(2) system call. + + +struct address_space_operations +=============================== + +This describes how the VFS can manipulate mapping of a file to page cache in +your filesystem. As of kernel 2.6.13, the following members are defined: + +struct address_space_operations { + int (*writepage)(struct page *page, struct writeback_control *wbc); + int (*readpage)(struct file *, struct page *); + int (*sync_page)(struct page *); + int (*writepages)(struct address_space *, struct writeback_control *); + int (*set_page_dirty)(struct page *page); + int (*readpages)(struct file *filp, struct address_space *mapping, + struct list_head *pages, unsigned nr_pages); + int (*prepare_write)(struct file *, struct page *, unsigned, unsigned); + int (*commit_write)(struct file *, struct page *, unsigned, unsigned); + sector_t (*bmap)(struct address_space *, sector_t); + int (*invalidatepage) (struct page *, unsigned long); + int (*releasepage) (struct page *, int); + ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov, + loff_t offset, unsigned long nr_segs); + struct page* (*get_xip_page)(struct address_space *, sector_t, + int); +}; + + writepage: called by the VM write a dirty page to backing store. + + readpage: called by the VM to read a page from backing store. + + sync_page: called by the VM to notify the backing store to perform all + queued I/O operations for a page. I/O operations for other pages + associated with this address_space object may also be performed. + + writepages: called by the VM to write out pages associated with the + address_space object. + + set_page_dirty: called by the VM to set a page dirty. + + readpages: called by the VM to read pages associated with the address_space + object. + prepare_write: called by the generic write path in VM to set up a write + request for a page. -struct file_operations
+ commit_write: called by the generic write path in VM to write page to + its backing store. + + bmap: called by the VFS to map a logical block offset within object to + physical block number. This method is use by for the legacy FIBMAP + ioctl. Other uses are discouraged. + + invalidatepage: called by the VM on truncate to disassociate a page from its + address_space mapping. + + releasepage: called by the VFS to release filesystem specific metadata from + a page. + + direct_IO: called by the VM for direct I/O writes and reads. + + get_xip_page: called by the VM to translate a block number to a page. + The page is valid until the corresponding filesystem is unmounted. + Filesystems that want to use execute-in-place (XIP) need to implement + it. An example implementation can be found in fs/ext2/xip.c. + + +struct file_operations ====================== This describes how the VFS can manipulate an open file. As of kernel -2.1.99, the following members are defined: +2.6.13, the following members are defined: struct file_operations { loff_t (*llseek) (struct file *, loff_t, int); - ssize_t (*read) (struct file *, char *, size_t, loff_t *); - ssize_t (*write) (struct file *, const char *, size_t, loff_t *); + ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); + ssize_t (*aio_read) (struct kiocb *, char __user *, size_t, loff_t); + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); + ssize_t (*aio_write) (struct kiocb *, const char __user *, size_t, loff_t); int (*readdir) (struct file *, void *, filldir_t); unsigned int (*poll) (struct file *, struct poll_table_struct *); int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long); + long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct inode *, struct file *); + int (*flush) (struct file *); int (*release) (struct inode *, struct file *); - int (*fsync) (struct file *, struct dentry *); - int (*fasync) (struct file *, int); - int (*check_media_change) (kdev_t dev); - int (*revalidate) (kdev_t dev); + int (*fsync) (struct file *, struct dentry *, int datasync); + int (*aio_fsync) (struct kiocb *, int datasync); + int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); + ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, loff_t *); + ssize_t (*writev) (struct file *, const struct iovec *, unsigned long, loff_t *); + ssize_t (*sendfile) (struct file *, loff_t *, size_t, read_actor_t, void *); + ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); + unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); + int (*check_flags)(int); + int (*dir_notify)(struct file *filp, unsigned long arg); + int (*flock) (struct file *, int, struct file_lock *); }; Again, all methods are called without any locks being held, unless @@ -362,8 +544,12 @@ otherwise noted. read: called by read(2) and related system calls + aio_read: called by io_submit(2) and other asynchronous I/O operations + write: called by write(2) and related system calls + aio_write: called by io_submit(2) and other asynchronous I/O operations + readdir: called when the VFS needs to read the directory contents poll: called by the VFS when a process wants to check if there is @@ -372,18 +558,25 @@ otherwise noted. ioctl: called by the ioctl(2) system call + unlocked_ioctl: called by the ioctl(2) system call. Filesystems that do not + require the BKL should use this method instead of the ioctl() above. + + compat_ioctl: called by the ioctl(2) system call when 32 bit system calls + are used on 64 bit kernels. + mmap: called by the mmap(2) system call open: called by the VFS when an inode should be opened. When the VFS - opens a file, it creates a new "struct file" and initialises - the "f_op" file operations member with the "default_file_ops" - field in the inode structure. It then calls the open method - for the newly allocated file structure. You might think that - the open method really belongs in "struct inode_operations", - and you may be right. I think it's done the way it is because - it makes filesystems simpler to implement. The open() method - is a good place to initialise the "private_data" member in the - file structure if you want to point to a device structure + opens a file, it creates a new "struct file". It then calls the + open method for the newly allocated file structure. You might + think that the open method really belongs in + "struct inode_operations", and you may be right. I think it's + done the way it is because it makes filesystems simpler to + implement. The open() method is a good place to initialize the + "private_data" member in the file structure if you want to point + to a device structure + + flush: called by the close(2) system call to flush a file release: called when the last reference to an open file is closed @@ -392,6 +585,23 @@ otherwise noted. fasync: called by the fcntl(2) system call when asynchronous (non-blocking) mode is enabled for a file + lock: called by the fcntl(2) system call for F_GETLK, F_SETLK, and F_SETLKW + commands + + readv: called by the readv(2) system call + + writev: called by the writev(2) system call + + sendfile: called by the sendfile(2) system call + + get_unmapped_area: called by the mmap(2) system call + + check_flags: called by the fcntl(2) system call for F_SETFL command + + dir_notify: called by the fcntl(2) system call for F_NOTIFY command + + flock: called by the flock(2) system call + Note that the file operations are implemented by the specific filesystem in which the inode resides. When opening a device node (character or block special) most filesystems will call special @@ -400,29 +610,28 @@ driver information. These support routines replace the filesystem file operations with those for the device driver, and then proceed to call the new open() method for the file. This is how opening a device file in the filesystem eventually ends up calling the device driver open() -method. Note the devfs (the Device FileSystem) has a more direct path -from device node to device driver (this is an unofficial kernel -patch). +method. -Directory Entry Cache (dcache)
------------------------------- +Directory Entry Cache (dcache) +============================== + struct dentry_operations -======================== +------------------------ This describes how a filesystem can overload the standard dentry operations. Dentries and the dcache are the domain of the VFS and the individual filesystem implementations. Device drivers have no business here. These methods may be set to NULL, as they are either optional or -the VFS uses a default. As of kernel 2.1.99, the following members are +the VFS uses a default. As of kernel 2.6.13, the following members are defined: struct dentry_operations { - int (*d_revalidate)(struct dentry *); + int (*d_revalidate)(struct dentry *, struct nameidata *); int (*d_hash) (struct dentry *, struct qstr *); int (*d_compare) (struct dentry *, struct qstr *, struct qstr *); - void (*d_delete)(struct dentry *); + int (*d_delete)(struct dentry *); void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); }; @@ -451,6 +660,7 @@ Each dentry has a pointer to its parent dentry, as well as a hash list of child dentries. Child dentries are basically like files in a directory. + Directory Entry Cache APIs -------------------------- @@ -471,7 +681,7 @@ manipulate dentries: "d_delete" method is called d_drop: this unhashes a dentry from its parents hash list. A - subsequent call to dput() will dellocate the dentry if its + subsequent call to dput() will deallocate the dentry if its usage count drops to 0 d_delete: delete a dentry. If there are no other open references to @@ -507,16 +717,16 @@ up by walking the tree starting with the first component of the pathname and using that dentry along with the next component to look up the next level and so on. Since it is a frequent operation for workloads like multiuser -environments and webservers, it is important to optimize +environments and web servers, it is important to optimize this path. Prior to 2.5.10, dcache_lock was acquired in d_lookup and thus in every component during path look-up. Since 2.5.10 onwards, -fastwalk algorithm changed this by holding the dcache_lock +fast-walk algorithm changed this by holding the dcache_lock at the beginning and walking as many cached path component -dentries as possible. This signficantly decreases the number +dentries as possible. This significantly decreases the number of acquisition of dcache_lock. However it also increases the -lock hold time signficantly and affects performance in large +lock hold time significantly and affects performance in large SMP machines. Since 2.5.62 kernel, dcache has been using a new locking model that uses RCU to make dcache look-up lock-free. @@ -527,7 +737,7 @@ protected the hash chain, d_child, d_alias, d_lru lists as well as d_inode and several other things like mount look-up. RCU-based changes affect only the way the hash chain is protected. For everything else the dcache_lock must be taken for both traversing as well as -updating. The hash chain updations too take the dcache_lock. +updating. The hash chain updates too take the dcache_lock. The significant change is the way d_lookup traverses the hash chain, it doesn't acquire the dcache_lock for this and rely on RCU to ensure that the dentry has not been *freed*. @@ -535,14 +745,15 @@ ensure that the dentry has not been *freed*. Dcache locking details ---------------------- + For many multi-user workloads, open() and stat() on files are very frequently occurring operations. Both involve walking of path names to find the dentry corresponding to the concerned file. In 2.4 kernel, dcache_lock was held during look-up of each path component. Contention and -cacheline bouncing of this global lock caused significant +cache-line bouncing of this global lock caused significant scalability problems. With the introduction of RCU -in linux kernel, this was worked around by making +in Linux kernel, this was worked around by making the look-up of path components during path walking lock-free. @@ -562,7 +773,7 @@ Some of the important changes are : 2. Insertion of a dentry into the hash table is done using hlist_add_head_rcu() which take care of ordering the writes - the writes to the dentry must be visible before the dentry - is inserted. This works in conjuction with hlist_for_each_rcu() + is inserted. This works in conjunction with hlist_for_each_rcu() while walking the hash chain. The only requirement is that all initialization to the dentry must be done before hlist_add_head_rcu() since we don't have dcache_lock protection while traversing @@ -584,7 +795,7 @@ Some of the important changes are : the same. In some sense, dcache_rcu path walking looks like the pre-2.5.10 version. -5. All dentry hash chain updations must take the dcache_lock as well as +5. All dentry hash chain updates must take the dcache_lock as well as the per-dentry lock in that order. dput() does this to ensure that a dentry that has just been looked up in another CPU doesn't get deleted before dget() can be done on it. @@ -640,10 +851,10 @@ handled as described below : Since we redo the d_parent check and compare name while holding d_lock, lock-free look-up will not race against d_move(). -4. There can be a theoritical race when a dentry keeps coming back +4. There can be a theoretical race when a dentry keeps coming back to original bucket due to double moves. Due to this look-up may consider that it has never moved and can end up in a infinite loop. - But this is not any worse that theoritical livelocks we already + But this is not any worse that theoretical livelocks we already have in the kernel. diff --git a/trunk/Documentation/firmware_class/firmware_sample_driver.c b/trunk/Documentation/firmware_class/firmware_sample_driver.c index e1c56a7e6583..4bef8c25172c 100644 --- a/trunk/Documentation/firmware_class/firmware_sample_driver.c +++ b/trunk/Documentation/firmware_class/firmware_sample_driver.c @@ -32,14 +32,14 @@ static void sample_firmware_load(char *firmware, int size) u8 buf[size+1]; memcpy(buf, firmware, size); buf[size] = '\0'; - printk("firmware_sample_driver: firmware: %s\n", buf); + printk(KERN_INFO "firmware_sample_driver: firmware: %s\n", buf); } static void sample_probe_default(void) { /* uses the default method to get the firmware */ const struct firmware *fw_entry; - printk("firmware_sample_driver: a ghost device got inserted :)\n"); + printk(KERN_INFO "firmware_sample_driver: a ghost device got inserted :)\n"); if(request_firmware(&fw_entry, "sample_driver_fw", &ghost_device)!=0) { @@ -61,7 +61,7 @@ static void sample_probe_specific(void) /* NOTE: This currently doesn't work */ - printk("firmware_sample_driver: a ghost device got inserted :)\n"); + printk(KERN_INFO "firmware_sample_driver: a ghost device got inserted :)\n"); if(request_firmware(NULL, "sample_driver_fw", &ghost_device)!=0) { @@ -83,7 +83,7 @@ static void sample_probe_async_cont(const struct firmware *fw, void *context) return; } - printk("firmware_sample_driver: device pointer \"%s\"\n", + printk(KERN_INFO "firmware_sample_driver: device pointer \"%s\"\n", (char *)context); sample_firmware_load(fw->data, fw->size); } diff --git a/trunk/Documentation/i386/boot.txt b/trunk/Documentation/i386/boot.txt index 1c48f0eba6fb..10312bebe55d 100644 --- a/trunk/Documentation/i386/boot.txt +++ b/trunk/Documentation/i386/boot.txt @@ -2,7 +2,7 @@ ---------------------------- H. Peter Anvin - Last update 2002-01-01 + Last update 2005-09-02 On the i386 platform, the Linux kernel uses a rather complicated boot convention. This has evolved partially due to historical aspects, as @@ -34,6 +34,8 @@ Protocol 2.02: (Kernel 2.4.0-test3-pre3) New command line protocol. Protocol 2.03: (Kernel 2.4.18-pre1) Explicitly makes the highest possible initrd address available to the bootloader. +Protocol 2.04: (Kernel 2.6.14) Extend the syssize field to four bytes. + **** MEMORY LAYOUT @@ -103,10 +105,9 @@ The header looks like: Offset Proto Name Meaning /Size -01F1/1 ALL setup_sects The size of the setup in sectors +01F1/1 ALL(1 setup_sects The size of the setup in sectors 01F2/2 ALL root_flags If set, the root is mounted readonly -01F4/2 ALL syssize DO NOT USE - for bootsect.S use only -01F6/2 ALL swap_dev DO NOT USE - obsolete +01F4/4 2.04+(2 syssize The size of the 32-bit code in 16-byte paras 01F8/2 ALL ram_size DO NOT USE - for bootsect.S use only 01FA/2 ALL vid_mode Video mode control 01FC/2 ALL root_dev Default root device number @@ -129,8 +130,12 @@ Offset Proto Name Meaning 0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line 022C/4 2.03+ initrd_addr_max Highest legal initrd address -For backwards compatibility, if the setup_sects field contains 0, the -real value is 4. +(1) For backwards compatibility, if the setup_sects field contains 0, the + real value is 4. + +(2) For boot protocol prior to 2.04, the upper two bytes of the syssize + field are unusable, which means the size of a bzImage kernel + cannot be determined. If the "HdrS" (0x53726448) magic number is not found at offset 0x202, the boot protocol version is "old". Loading an old kernel, the @@ -230,12 +235,16 @@ loader to communicate with the kernel. Some of its options are also relevant to the boot loader itself, see "special command line options" below. -The kernel command line is a null-terminated string up to 255 -characters long, plus the final null. +The kernel command line is a null-terminated string currently up to +255 characters long, plus the final null. A string that is too long +will be automatically truncated by the kernel, a boot loader may allow +a longer command line to be passed to permit future kernels to extend +this limit. If the boot protocol version is 2.02 or later, the address of the kernel command line is given by the header field cmd_line_ptr (see -above.) +above.) This address can be anywhere between the end of the setup +heap and 0xA0000. If the protocol version is *not* 2.02 or higher, the kernel command line is entered using the following protocol: @@ -255,7 +264,7 @@ command line is entered using the following protocol: **** SAMPLE BOOT CONFIGURATION As a sample configuration, assume the following layout of the real -mode segment: +mode segment (this is a typical, and recommended layout): 0x0000-0x7FFF Real mode kernel 0x8000-0x8FFF Stack and heap @@ -312,9 +321,9 @@ Such a boot loader should enter the following fields in the header: **** LOADING THE REST OF THE KERNEL -The non-real-mode kernel starts at offset (setup_sects+1)*512 in the -kernel file (again, if setup_sects == 0 the real value is 4.) It -should be loaded at address 0x10000 for Image/zImage kernels and +The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512 +in the kernel file (again, if setup_sects == 0 the real value is 4.) +It should be loaded at address 0x10000 for Image/zImage kernels and 0x100000 for bzImage kernels. The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01 diff --git a/trunk/Documentation/ia64/mca.txt b/trunk/Documentation/ia64/mca.txt new file mode 100644 index 000000000000..a71cc6a67ef7 --- /dev/null +++ b/trunk/Documentation/ia64/mca.txt @@ -0,0 +1,194 @@ +An ad-hoc collection of notes on IA64 MCA and INIT processing. Feel +free to update it with notes about any area that is not clear. + +--- + +MCA/INIT are completely asynchronous. They can occur at any time, when +the OS is in any state. Including when one of the cpus is already +holding a spinlock. Trying to get any lock from MCA/INIT state is +asking for deadlock. Also the state of structures that are protected +by locks is indeterminate, including linked lists. + +--- + +The complicated ia64 MCA process. All of this is mandated by Intel's +specification for ia64 SAL, error recovery and and unwind, it is not as +if we have a choice here. + +* MCA occurs on one cpu, usually due to a double bit memory error. + This is the monarch cpu. + +* SAL sends an MCA rendezvous interrupt (which is a normal interrupt) + to all the other cpus, the slaves. + +* Slave cpus that receive the MCA interrupt call down into SAL, they + end up spinning disabled while the MCA is being serviced. + +* If any slave cpu was already spinning disabled when the MCA occurred + then it cannot service the MCA interrupt. SAL waits ~20 seconds then + sends an unmaskable INIT event to the slave cpus that have not + already rendezvoused. + +* Because MCA/INIT can be delivered at any time, including when the cpu + is down in PAL in physical mode, the registers at the time of the + event are _completely_ undefined. In particular the MCA/INIT + handlers cannot rely on the thread pointer, PAL physical mode can + (and does) modify TP. It is allowed to do that as long as it resets + TP on return. However MCA/INIT events expose us to these PAL + internal TP changes. Hence curr_task(). + +* If an MCA/INIT event occurs while the kernel was running (not user + space) and the kernel has called PAL then the MCA/INIT handler cannot + assume that the kernel stack is in a fit state to be used. Mainly + because PAL may or may not maintain the stack pointer internally. + Because the MCA/INIT handlers cannot trust the kernel stack, they + have to use their own, per-cpu stacks. The MCA/INIT stacks are + preformatted with just enough task state to let the relevant handlers + do their job. + +* Unlike most other architectures, the ia64 struct task is embedded in + the kernel stack[1]. So switching to a new kernel stack means that + we switch to a new task as well. Because various bits of the kernel + assume that current points into the struct task, switching to a new + stack also means a new value for current. + +* Once all slaves have rendezvoused and are spinning disabled, the + monarch is entered. The monarch now tries to diagnose the problem + and decide if it can recover or not. + +* Part of the monarch's job is to look at the state of all the other + tasks. The only way to do that on ia64 is to call the unwinder, + as mandated by Intel. + +* The starting point for the unwind depends on whether a task is + running or not. That is, whether it is on a cpu or is blocked. The + monarch has to determine whether or not a task is on a cpu before it + knows how to start unwinding it. The tasks that received an MCA or + INIT event are no longer running, they have been converted to blocked + tasks. But (and its a big but), the cpus that received the MCA + rendezvous interrupt are still running on their normal kernel stacks! + +* To distinguish between these two cases, the monarch must know which + tasks are on a cpu and which are not. Hence each slave cpu that + switches to an MCA/INIT stack, registers its new stack using + set_curr_task(), so the monarch can tell that the _original_ task is + no longer running on that cpu. That gives us a decent chance of + getting a valid backtrace of the _original_ task. + +* MCA/INIT can be nested, to a depth of 2 on any cpu. In the case of a + nested error, we want diagnostics on the MCA/INIT handler that + failed, not on the task that was originally running. Again this + requires set_curr_task() so the MCA/INIT handlers can register their + own stack as running on that cpu. Then a recursive error gets a + trace of the failing handler's "task". + +[1] My (Keith Owens) original design called for ia64 to separate its + struct task and the kernel stacks. Then the MCA/INIT data would be + chained stacks like i386 interrupt stacks. But that required + radical surgery on the rest of ia64, plus extra hard wired TLB + entries with its associated performance degradation. David + Mosberger vetoed that approach. Which meant that separate kernel + stacks meant separate "tasks" for the MCA/INIT handlers. + +--- + +INIT is less complicated than MCA. Pressing the nmi button or using +the equivalent command on the management console sends INIT to all +cpus. SAL picks one one of the cpus as the monarch and the rest are +slaves. All the OS INIT handlers are entered at approximately the same +time. The OS monarch prints the state of all tasks and returns, after +which the slaves return and the system resumes. + +At least that is what is supposed to happen. Alas there are broken +versions of SAL out there. Some drive all the cpus as monarchs. Some +drive them all as slaves. Some drive one cpu as monarch, wait for that +cpu to return from the OS then drive the rest as slaves. Some versions +of SAL cannot even cope with returning from the OS, they spin inside +SAL on resume. The OS INIT code has workarounds for some of these +broken SAL symptoms, but some simply cannot be fixed from the OS side. + +--- + +The scheduler hooks used by ia64 (curr_task, set_curr_task) are layer +violations. Unfortunately MCA/INIT start off as massive layer +violations (can occur at _any_ time) and they build from there. + +At least ia64 makes an attempt at recovering from hardware errors, but +it is a difficult problem because of the asynchronous nature of these +errors. When processing an unmaskable interrupt we sometimes need +special code to cope with our inability to take any locks. + +--- + +How is ia64 MCA/INIT different from x86 NMI? + +* x86 NMI typically gets delivered to one cpu. MCA/INIT gets sent to + all cpus. + +* x86 NMI cannot be nested. MCA/INIT can be nested, to a depth of 2 + per cpu. + +* x86 has a separate struct task which points to one of multiple kernel + stacks. ia64 has the struct task embedded in the single kernel + stack, so switching stack means switching task. + +* x86 does not call the BIOS so the NMI handler does not have to worry + about any registers having changed. MCA/INIT can occur while the cpu + is in PAL in physical mode, with undefined registers and an undefined + kernel stack. + +* i386 backtrace is not very sensitive to whether a process is running + or not. ia64 unwind is very, very sensitive to whether a process is + running or not. + +--- + +What happens when MCA/INIT is delivered what a cpu is running user +space code? + +The user mode registers are stored in the RSE area of the MCA/INIT on +entry to the OS and are restored from there on return to SAL, so user +mode registers are preserved across a recoverable MCA/INIT. Since the +OS has no idea what unwind data is available for the user space stack, +MCA/INIT never tries to backtrace user space. Which means that the OS +does not bother making the user space process look like a blocked task, +i.e. the OS does not copy pt_regs and switch_stack to the user space +stack. Also the OS has no idea how big the user space RSE and memory +stacks are, which makes it too risky to copy the saved state to a user +mode stack. + +--- + +How do we get a backtrace on the tasks that were running when MCA/INIT +was delivered? + +mca.c:::ia64_mca_modify_original_stack(). That identifies and +verifies the original kernel stack, copies the dirty registers from +the MCA/INIT stack's RSE to the original stack's RSE, copies the +skeleton struct pt_regs and switch_stack to the original stack, fills +in the skeleton structures from the PAL minstate area and updates the +original stack's thread.ksp. That makes the original stack look +exactly like any other blocked task, i.e. it now appears to be +sleeping. To get a backtrace, just start with thread.ksp for the +original task and unwind like any other sleeping task. + +--- + +How do we identify the tasks that were running when MCA/INIT was +delivered? + +If the previous task has been verified and converted to a blocked +state, then sos->prev_task on the MCA/INIT stack is updated to point to +the previous task. You can look at that field in dumps or debuggers. +To help distinguish between the handler and the original tasks, +handlers have _TIF_MCA_INIT set in thread_info.flags. + +The sos data is always in the MCA/INIT handler stack, at offset +MCA_SOS_OFFSET. You can get that value from mca_asm.h or calculate it +as KERNEL_STACK_SIZE - sizeof(struct pt_regs) - sizeof(struct +ia64_sal_os_state), with 16 byte alignment for all structures. + +Also the comm field of the MCA/INIT task is modified to include the pid +of the original task, for humans to use. For example, a comm field of +'MCA 12159' means that pid 12159 was running when the MCA was +delivered. diff --git a/trunk/Documentation/ibm-acpi.txt b/trunk/Documentation/ibm-acpi.txt index c437b1aeff55..8b3fd82b2ce7 100644 --- a/trunk/Documentation/ibm-acpi.txt +++ b/trunk/Documentation/ibm-acpi.txt @@ -1,16 +1,16 @@ IBM ThinkPad ACPI Extras Driver - Version 0.8 - 8 November 2004 + Version 0.12 + 17 August 2005 Borislav Deianov http://ibm-acpi.sf.net/ -This is a Linux ACPI driver for the IBM ThinkPad laptops. It aims to -support various features of these laptops which are accessible through -the ACPI framework but not otherwise supported by the generic Linux -ACPI drivers. +This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports +various features of these laptops which are accessible through the +ACPI framework but not otherwise supported by the generic Linux ACPI +drivers. Status @@ -25,9 +25,14 @@ detailed description): - ThinkLight on and off - limited docking and undocking - UltraBay eject - - Experimental: CMOS control - - Experimental: LED control - - Experimental: ACPI sounds + - CMOS control + - LED control + - ACPI sounds + - temperature sensors + - Experimental: embedded controller register dump + - Experimental: LCD brightness control + - Experimental: volume control + - Experimental: fan speed, fan enable/disable A compatibility table by model and feature is maintained on the web site, http://ibm-acpi.sf.net/. I appreciate any success or failure @@ -91,12 +96,12 @@ driver is still in the alpha stage, the exact proc file format and commands supported by the various features is guaranteed to change frequently. -Driver Version -- /proc/acpi/ibm/driver --------------------------------------- +Driver version -- /proc/acpi/ibm/driver +--------------------------------------- The driver name and version. No commands can be written to this file. -Hot Keys -- /proc/acpi/ibm/hotkey +Hot keys -- /proc/acpi/ibm/hotkey --------------------------------- Without this driver, only the Fn-F4 key (sleep button) generates an @@ -188,7 +193,7 @@ and, on the X40, video corruption. By disabling automatic switching, the flickering or video corruption can be avoided. The video_switch command cycles through the available video outputs -(it sumulates the behavior of Fn-F7). +(it simulates the behavior of Fn-F7). Video expansion can be toggled through this feature. This controls whether the display is expanded to fill the entire LCD screen when a @@ -201,6 +206,12 @@ Fn-F7 from working. This also disables the video output switching features of this driver, as it uses the same ACPI methods as Fn-F7. Video switching on the console should still work. +UPDATE: There's now a patch for the X.org Radeon driver which +addresses this issue. Some people are reporting success with the patch +while others are still having problems. For more information: + +https://bugs.freedesktop.org/show_bug.cgi?id=2000 + ThinkLight control -- /proc/acpi/ibm/light ------------------------------------------ @@ -211,7 +222,7 @@ models which do not make the status available will show it as echo on > /proc/acpi/ibm/light echo off > /proc/acpi/ibm/light -Docking / Undocking -- /proc/acpi/ibm/dock +Docking / undocking -- /proc/acpi/ibm/dock ------------------------------------------ Docking and undocking (e.g. with the X4 UltraBase) requires some @@ -228,11 +239,15 @@ NOTE: These events will only be generated if the laptop was docked when originally booted. This is due to the current lack of support for hot plugging of devices in the Linux ACPI framework. If the laptop was booted while not in the dock, the following message is shown in the -logs: "ibm_acpi: dock device not present". No dock-related events are -generated but the dock and undock commands described below still -work. They can be executed manually or triggered by Fn key -combinations (see the example acpid configuration files included in -the driver tarball package available on the web site). +logs: + + Mar 17 01:42:34 aero kernel: ibm_acpi: dock device not present + +In this case, no dock-related events are generated but the dock and +undock commands described below still work. They can be executed +manually or triggered by Fn key combinations (see the example acpid +configuration files included in the driver tarball package available +on the web site). When the eject request button on the dock is pressed, the first event above is generated. The handler for this event should issue the @@ -267,7 +282,7 @@ the only docking stations currently supported are the X-series UltraBase docks and "dumb" port replicators like the Mini Dock (the latter don't need any ACPI support, actually). -UltraBay Eject -- /proc/acpi/ibm/bay +UltraBay eject -- /proc/acpi/ibm/bay ------------------------------------ Inserting or ejecting an UltraBay device requires some actions to be @@ -284,8 +299,11 @@ when the laptop was originally booted (on the X series, the UltraBay is in the dock, so it may not be present if the laptop was undocked). This is due to the current lack of support for hot plugging of devices in the Linux ACPI framework. If the laptop was booted without the -UltraBay, the following message is shown in the logs: "ibm_acpi: bay -device not present". No bay-related events are generated but the eject +UltraBay, the following message is shown in the logs: + + Mar 17 01:42:34 aero kernel: ibm_acpi: bay device not present + +In this case, no bay-related events are generated but the eject command described below still works. It can be executed manually or triggered by a hot key combination. @@ -306,22 +324,33 @@ necessary to enable the UltraBay device (e.g. call idectl). The contents of the /proc/acpi/ibm/bay file shows the current status of the UltraBay, as provided by the ACPI framework. -Experimental Features ---------------------- +EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use +this feature, you need to supply the experimental=1 parameter when +loading the module): + +These models do not have a button near the UltraBay device to request +a hot eject but rather require the laptop to be put to sleep +(suspend-to-ram) before the bay device is ejected or inserted). +The sequence of steps to eject the device is as follows: + + echo eject > /proc/acpi/ibm/bay + put the ThinkPad to sleep + remove the drive + resume from sleep + cat /proc/acpi/ibm/bay should show that the drive was removed + +On the A3x, both the UltraBay 2000 and UltraBay Plus devices are +supported. Use "eject2" instead of "eject" for the second bay. -The following features are marked experimental because using them -involves guessing the correct values of some parameters. Guessing -incorrectly may have undesirable effects like crashing your -ThinkPad. USE THESE WITH CAUTION! To activate them, you'll need to -supply the experimental=1 parameter when loading the module. +Note: the UltraBay eject support on the 600e/x, A22p and A3x is +EXPERIMENTAL and may not work as expected. USE WITH CAUTION! -Experimental: CMOS control - /proc/acpi/ibm/cmos ------------------------------------------------- +CMOS control -- /proc/acpi/ibm/cmos +----------------------------------- This feature is used internally by the ACPI firmware to control the -ThinkLight on most newer ThinkPad models. It appears that it can also -control LCD brightness, sounds volume and more, but only on some -models. +ThinkLight on most newer ThinkPad models. It may also control LCD +brightness, sounds volume and more, but only on some models. The commands are non-negative integer numbers: @@ -330,10 +359,9 @@ The commands are non-negative integer numbers: echo 2 >/proc/acpi/ibm/cmos ... -The range of numbers which are used internally by various models is 0 -to 21, but it's possible that numbers outside this range have -interesting behavior. Here is the behavior on the X40 (tpb is the -ThinkPad Buttons utility): +The range of valid numbers is 0 to 21, but not all have an effect and +the behavior varies from model to model. Here is the behavior on the +X40 (tpb is the ThinkPad Buttons utility): 0 - no effect but tpb reports "Volume down" 1 - no effect but tpb reports "Volume up" @@ -346,26 +374,18 @@ ThinkPad Buttons utility): 13 - ThinkLight off 14 - no effect but tpb reports ThinkLight status change -If you try this feature, please send me a report similar to the -above. On models which allow control of LCD brightness or sound -volume, I'd like to provide this functionality in an user-friendly -way, but first I need a way to identify the models which this is -possible. - -Experimental: LED control - /proc/acpi/ibm/LED ----------------------------------------------- +LED control -- /proc/acpi/ibm/led +--------------------------------- Some of the LED indicators can be controlled through this feature. The available commands are: - echo on >/proc/acpi/ibm/led - echo off >/proc/acpi/ibm/led - echo blink >/proc/acpi/ibm/led + echo ' on' >/proc/acpi/ibm/led + echo ' off' >/proc/acpi/ibm/led + echo ' blink' >/proc/acpi/ibm/led -The parameter is a non-negative integer. The range of LED -numbers used internally by various models is 0 to 7 but it's possible -that numbers outside this range are also valid. Here is the mapping on -the X40: +The range is 0 to 7. The set of LEDs that can be +controlled varies from model to model. Here is the mapping on the X40: 0 - power 1 - battery (orange) @@ -376,49 +396,224 @@ the X40: All of the above can be turned on and off and can be made to blink. -If you try this feature, please send me a report similar to the -above. I'd like to provide this functionality in an user-friendly way, -but first I need to identify the which numbers correspond to which -LEDs on various models. - -Experimental: ACPI sounds - /proc/acpi/ibm/beep ------------------------------------------------ +ACPI sounds -- /proc/acpi/ibm/beep +---------------------------------- The BEEP method is used internally by the ACPI firmware to provide -audible alerts in various situtation. This feature allows the same +audible alerts in various situations. This feature allows the same sounds to be triggered manually. The commands are non-negative integer numbers: - echo 0 >/proc/acpi/ibm/beep - echo 1 >/proc/acpi/ibm/beep - echo 2 >/proc/acpi/ibm/beep - ... + echo >/proc/acpi/ibm/beep -The range of numbers which are used internally by various models is 0 -to 17, but it's possible that numbers outside this range are also -valid. Here is the behavior on the X40: +The valid range is 0 to 17. Not all numbers trigger sounds +and the sounds vary from model to model. Here is the behavior on the +X40: - 2 - two beeps, pause, third beep + 0 - stop a sound in progress (but use 17 to stop 16) + 2 - two beeps, pause, third beep ("low battery") 3 - single beep - 4 - "unable" + 4 - high, followed by low-pitched beep ("unable") 5 - single beep - 6 - "AC/DC" + 6 - very high, followed by high-pitched beep ("AC/DC") 7 - high-pitched beep 9 - three short beeps 10 - very long beep 12 - low-pitched beep + 15 - three high-pitched beeps repeating constantly, stop with 0 + 16 - one medium-pitched beep repeating constantly, stop with 17 + 17 - stop 16 + +Temperature sensors -- /proc/acpi/ibm/thermal +--------------------------------------------- + +Most ThinkPads include six or more separate temperature sensors but +only expose the CPU temperature through the standard ACPI methods. +This feature shows readings from up to eight different sensors. Some +readings may not be valid, e.g. may show large negative values. For +example, on the X40, a typical output may be: + +temperatures: 42 42 45 41 36 -128 33 -128 + +Thomas Gruber took his R51 apart and traced all six active sensors in +his laptop (the location of sensors may vary on other models): + +1: CPU +2: Mini PCI Module +3: HDD +4: GPU +5: Battery +6: N/A +7: Battery +8: N/A + +No commands can be written to this file. + +EXPERIMENTAL: Embedded controller reigster dump -- /proc/acpi/ibm/ecdump +------------------------------------------------------------------------ + +This feature is marked EXPERIMENTAL because the implementation +directly accesses hardware registers and may not work as expected. USE +WITH CAUTION! To use this feature, you need to supply the +experimental=1 parameter when loading the module. + +This feature dumps the values of 256 embedded controller +registers. Values which have changed since the last time the registers +were dumped are marked with a star: + +[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump +EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f +EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00 +EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00 +EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80 +EC 0x30: 01 07 1a 00 30 04 00 00 *85 00 00 10 00 50 00 00 +EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00 +EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 *bc *02 *bc +EC 0x60: *02 *bc *02 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0x70: 00 00 00 00 00 12 30 40 *24 *26 *2c *27 *20 80 *1f 80 +EC 0x80: 00 00 00 06 *37 *0e 03 00 00 00 0e 07 00 00 00 00 +EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xa0: *ff 09 ff 09 ff ff *64 00 *00 *00 *a2 41 *ff *ff *e0 00 +EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03 +EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a + +This feature can be used to determine the register holding the fan +speed on some models. To do that, do the following: + + - make sure the battery is fully charged + - make sure the fan is running + - run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so + +The first step makes sure various charging-related values don't +vary. The second ensures that the fan-related values do vary, since +the fan speed fluctuates a bit. The third will (hopefully) mark the +fan register with a star: + +[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump +EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f +EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00 +EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00 +EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80 +EC 0x30: 01 07 1a 00 30 04 00 00 85 00 00 10 00 50 00 00 +EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00 +EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 bc 02 bc +EC 0x60: 02 bc 02 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0x70: 00 00 00 00 00 12 30 40 24 27 2c 27 21 80 1f 80 +EC 0x80: 00 00 00 06 *be 0d 03 00 00 00 0e 07 00 00 00 00 +EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xa0: ff 09 ff 09 ff ff 64 00 00 00 a2 41 ff ff e0 00 +EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03 +EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a + +Another set of values that varies often is the temperature +readings. Since temperatures don't change vary fast, you can take +several quick dumps to eliminate them. + +You can use a similar method to figure out the meaning of other +embedded controller registers - e.g. make sure nothing else changes +except the charging or discharging battery to determine which +registers contain the current battery capacity, etc. If you experiment +with this, do send me your results (including some complete dumps with +a description of the conditions when they were taken.) + +EXPERIMENTAL: LCD brightness control -- /proc/acpi/ibm/brightness +----------------------------------------------------------------- + +This feature is marked EXPERIMENTAL because the implementation +directly accesses hardware registers and may not work as expected. USE +WITH CAUTION! To use this feature, you need to supply the +experimental=1 parameter when loading the module. + +This feature allows software control of the LCD brightness on ThinkPad +models which don't have a hardware brightness slider. The available +commands are: + + echo up >/proc/acpi/ibm/brightness + echo down >/proc/acpi/ibm/brightness + echo 'level ' >/proc/acpi/ibm/brightness + +The number range is 0 to 7, although not all of them may be +distinct. The current brightness level is shown in the file. + +EXPERIMENTAL: Volume control -- /proc/acpi/ibm/volume +----------------------------------------------------- + +This feature is marked EXPERIMENTAL because the implementation +directly accesses hardware registers and may not work as expected. USE +WITH CAUTION! To use this feature, you need to supply the +experimental=1 parameter when loading the module. + +This feature allows volume control on ThinkPad models which don't have +a hardware volume knob. The available commands are: + + echo up >/proc/acpi/ibm/volume + echo down >/proc/acpi/ibm/volume + echo mute >/proc/acpi/ibm/volume + echo 'level ' >/proc/acpi/ibm/volume + +The number range is 0 to 15 although not all of them may be +distinct. The unmute the volume after the mute command, use either the +up or down command (the level command will not unmute the volume). +The current volume level and mute state is shown in the file. + +EXPERIMENTAL: fan speed, fan enable/disable -- /proc/acpi/ibm/fan +----------------------------------------------------------------- + +This feature is marked EXPERIMENTAL because the implementation +directly accesses hardware registers and may not work as expected. USE +WITH CAUTION! To use this feature, you need to supply the +experimental=1 parameter when loading the module. + +This feature attempts to show the current fan speed. The speed is read +directly from the hardware registers of the embedded controller. This +is known to work on later R, T and X series ThinkPads but may show a +bogus value on other models. + +The fan may be enabled or disabled with the following commands: + + echo enable >/proc/acpi/ibm/fan + echo disable >/proc/acpi/ibm/fan + +WARNING WARNING WARNING: do not leave the fan disabled unless you are +monitoring the temperature sensor readings and you are ready to enable +it if necessary to avoid overheating. + +The fan only runs if it's enabled *and* the various temperature +sensors which control it read high enough. On the X40, this seems to +depend on the CPU and HDD temperatures. Specifically, the fan is +turned on when either the CPU temperature climbs to 56 degrees or the +HDD temperature climbs to 46 degrees. The fan is turned off when the +CPU temperature drops to 49 degrees and the HDD temperature drops to +41 degrees. These thresholds cannot currently be controlled. + +On the X31 and X40 (and ONLY on those models), the fan speed can be +controlled to a certain degree. Once the fan is running, it can be +forced to run faster or slower with the following command: + + echo 'speed ' > /proc/acpi/ibm/thermal + +The sustainable range of fan speeds on the X40 appears to be from +about 3700 to about 7350. Values outside this range either do not have +any effect or the fan speed eventually settles somewhere in that +range. The fan cannot be stopped or started with this command. + +On the 570, temperature readings are not available through this +feature and the fan control works a little differently. The fan speed +is reported in levels from 0 (off) to 7 (max) and can be controlled +with the following command: -(I've only been able to identify a couple of them). - -If you try this feature, please send me a report similar to the -above. I'd like to provide this functionality in an user-friendly way, -but first I need to identify the which numbers correspond to which -sounds on various models. + echo 'level ' > /proc/acpi/ibm/thermal -Multiple Command, Module Parameters ------------------------------------ +Multiple Commands, Module Parameters +------------------------------------ Multiple commands can be written to the proc files in one shot by separating them with commas, for example: @@ -451,24 +646,19 @@ scripts (included with ibm-acpi for completeness): /usr/local/sbin/laptop_mode -- from the Linux kernel source distribution, see Documentation/laptop-mode.txt /sbin/service -- comes with Redhat/Fedora distributions + /usr/sbin/hibernate -- from the Software Suspend 2 distribution, + see http://softwaresuspend.berlios.de/ -Toan T Nguyen has written a SuSE powersave -script for the X20, included in config/usr/sbin/ibm_hotkeys_X20 +Toan T Nguyen notes that Suse uses the +powersave program to suspend ('powersave --suspend-to-ram') or +hibernate ('powersave --suspend-to-disk'). This means that the +hibernate script is not needed on that distribution. Henrik Brix Andersen has written a Gentoo ACPI event handler script for the X31. You can get the latest version from http://dev.gentoo.org/~brix/files/x31.sh David Schweikert has written an alternative blank.sh -script which works on Debian systems, included in -configs/etc/acpi/actions/blank-debian.sh - - -TODO ----- - -I'd like to implement the following features but haven't yet found the -time and/or I don't yet know how to implement them: - -- UltraBay floppy drive support - +script which works on Debian systems. This scripts has now been +extended to also work on Fedora systems and included as the default +blank.sh in the distribution. diff --git a/trunk/Documentation/input/appletouch.txt b/trunk/Documentation/input/appletouch.txt new file mode 100644 index 000000000000..b48d11d0326d --- /dev/null +++ b/trunk/Documentation/input/appletouch.txt @@ -0,0 +1,84 @@ +Apple Touchpad Driver (appletouch) +---------------------------------- + Copyright (C) 2005 Stelian Pop + +appletouch is a Linux kernel driver for the USB touchpad found on post +February 2005 Apple Alu Powerbooks. + +This driver is derived from Johannes Berg's appletrackpad driver[1], but it has +been improved in some areas: + * appletouch is a full kernel driver, no userspace program is necessary + * appletouch can be interfaced with the synaptics X11 driver, in order + to have touchpad acceleration, scrolling, etc. + +Credits go to Johannes Berg for reverse-engineering the touchpad protocol, +Frank Arnold for further improvements, and Alex Harper for some additional +information about the inner workings of the touchpad sensors. + +Usage: +------ + +In order to use the touchpad in the basic mode, compile the driver and load +the module. A new input device will be detected and you will be able to read +the mouse data from /dev/input/mice (using gpm, or X11). + +In X11, you can configure the touchpad to use the synaptics X11 driver, which +will give additional functionalities, like acceleration, scrolling, 2 finger +tap for middle button mouse emulation, 3 finger tap for right button mouse +emulation, etc. In order to do this, make sure you're using a recent version of +the synaptics driver (tested with 0.14.2, available from [2]), and configure a +new input device in your X11 configuration file (take a look below for an +example). For additional configuration, see the synaptics driver documentation. + + Section "InputDevice" + Identifier "Synaptics Touchpad" + Driver "synaptics" + Option "SendCoreEvents" "true" + Option "Device" "/dev/input/mice" + Option "Protocol" "auto-dev" + Option "LeftEdge" "0" + Option "RightEdge" "850" + Option "TopEdge" "0" + Option "BottomEdge" "645" + Option "MinSpeed" "0.4" + Option "MaxSpeed" "1" + Option "AccelFactor" "0.02" + Option "FingerLow" "0" + Option "FingerHigh" "30" + Option "MaxTapMove" "20" + Option "MaxTapTime" "100" + Option "HorizScrollDelta" "0" + Option "VertScrollDelta" "30" + Option "SHMConfig" "on" + EndSection + + Section "ServerLayout" + ... + InputDevice "Mouse" + InputDevice "Synaptics Touchpad" + ... + EndSection + +Fuzz problems: +-------------- + +The touchpad sensors are very sensitive to heat, and will generate a lot of +noise when the temperature changes. This is especially true when you power-on +the laptop for the first time. + +The appletouch driver tries to handle this noise and auto adapt itself, but it +is not perfect. If finger movements are not recognized anymore, try reloading +the driver. + +You can activate debugging using the 'debug' module parameter. A value of 0 +deactivates any debugging, 1 activates tracing of invalid samples, 2 activates +full tracing (each sample is being traced): + modprobe appletouch debug=1 + or + echo "1" > /sys/module/appletouch/parameters/debug + +Links: +------ + +[1]: http://johannes.sipsolutions.net/PowerBook/touchpad/ +[2]: http://web.telia.com/~u89404340/touchpad/index.html diff --git a/trunk/Documentation/input/yealink.txt b/trunk/Documentation/input/yealink.txt new file mode 100644 index 000000000000..85f095a7ad04 --- /dev/null +++ b/trunk/Documentation/input/yealink.txt @@ -0,0 +1,203 @@ +Driver documentation for yealink usb-p1k phones + +0. Status +~~~~~~~~~ + +The p1k is a relatively cheap usb 1.1 phone with: + - keyboard full support, yealink.ko / input event API + - LCD full support, yealink.ko / sysfs API + - LED full support, yealink.ko / sysfs API + - dialtone full support, yealink.ko / sysfs API + - ringtone full support, yealink.ko / sysfs API + - audio playback full support, snd_usb_audio.ko / alsa API + - audio record full support, snd_usb_audio.ko / alsa API + +For vendor documentation see http://www.yealink.com + + +1. Compilation (stand alone version) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Currently only kernel 2.6.x.y versions are supported. +In order to build the yealink.ko module do: + + make + +If you encounter problems please check if in the MAKE_OPTS variable in +the Makefile is pointing to the location where your kernel sources +are located, default /usr/src/linux. + + + +2. keyboard features +~~~~~~~~~~~~~~~~~~~~ +The current mapping in the kernel is provided by the map_p1k_to_key +function: + + Physical USB-P1K button layout input events + + + up up + IN OUT left, right + down down + + pickup C hangup enter, backspace, escape + 1 2 3 1, 2, 3 + 4 5 6 4, 5, 6, + 7 8 9 7, 8, 9, + * 0 # *, 0, #, + + The "up" and "down" keys, are symbolised by arrows on the button. + The "pickup" and "hangup" keys are symbolised by a green and red phone + on the button. + + +3. LCD features +~~~~~~~~~~~~~~~ +The LCD is divided and organised as a 3 line display: + + |[] [][] [][] [][] in |[][] + |[] M [][] D [][] : [][] out |[][] + store + + NEW REP SU MO TU WE TH FR SA + + [] [] [] [] [] [] [] [] [] [] [] [] + [] [] [] [] [] [] [] [] [] [] [] [] + + +Line 1 Format (see below) : 18.e8.M8.88...188 + Icon names : M D : IN OUT STORE +Line 2 Format : ......... + Icon name : NEW REP SU MO TU WE TH FR SA +Line 3 Format : 888888888888 + + +Format description: + From a user space perspective the world is seperated in "digits" and "icons". + A digit can have a character set, an icon can only be ON or OFF. + + Format specifier + '8' : Generic 7 segment digit with individual addressable segments + + Reduced capabillity 7 segm digit, when segments are hard wired together. + '1' : 2 segments digit only able to produce a 1. + 'e' : Most significant day of the month digit, + able to produce at least 1 2 3. + 'M' : Most significant minute digit, + able to produce at least 0 1 2 3 4 5. + + Icons or pictograms: + '.' : For example like AM, PM, SU, a 'dot' .. or other single segment + elements. + + +4. Driver usage +~~~~~~~~~~~~~~~ +For userland the following interfaces are available using the sysfs interface: + /sys/.../ + line1 Read/Write, lcd line1 + line2 Read/Write, lcd line2 + line3 Read/Write, lcd line3 + + get_icons Read, returns a set of available icons. + hide_icon Write, hide the element by writing the icon name. + show_icon Write, display the element by writing the icon name. + + map_seg7 Read/Write, the 7 segments char set, common for all + yealink phones. (see map_to_7segment.h) + + ringtone Write, upload binary representation of a ringtone, + see yealink.c. status EXPERIMENTAL due to potential + races between async. and sync usb calls. + + +4.1 lineX +~~~~~~~~~ +Reading /sys/../lineX will return the format string with its current value: + + Example: + cat ./line3 + 888888888888 + Linux Rocks! + +Writing to /sys/../lineX will set the coresponding LCD line. + - Excess characters are ignored. + - If less characters are written than allowed, the remaining digits are + unchanged. + - The tab '\t'and '\n' char does not overwrite the original content. + - Writing a space to an icon will always hide its content. + + Example: + date +"%m.%e.%k:%M" | sed 's/^0/ /' > ./line1 + + Will update the LCD with the current date & time. + + +4.2 get_icons +~~~~~~~~~~~~~ +Reading will return all available icon names and its current settings: + + cat ./get_icons + on M + on D + on : + IN + OUT + STORE + NEW + REP + SU + MO + TU + WE + TH + FR + SA + LED + DIALTONE + RINGTONE + + +4.3 show/hide icons +~~~~~~~~~~~~~~~~~~~ +Writing to these files will update the state of the icon. +Only one icon at a time can be updated. + +If an icon is also on a ./lineX the corresponding value is +updated with the first letter of the icon. + + Example - light up the store icon: + echo -n "STORE" > ./show_icon + + cat ./line1 + 18.e8.M8.88...188 + S + + Example - sound the ringtone for 10 seconds: + echo -n RINGTONE > /sys/..../show_icon + sleep 10 + echo -n RINGTONE > /sys/..../hide_icon + + +5. Sound features +~~~~~~~~~~~~~~~~~ +Sound is supported by the ALSA driver: snd_usb_audio + +One 16-bit channel with sample and playback rates of 8000 Hz is the practical +limit of the device. + + Example - recording test: + arecord -v -d 10 -r 8000 -f S16_LE -t wav foobar.wav + + Example - playback test: + aplay foobar.wav + + +6. Credits & Acknowledgments +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + - Olivier Vandorpe, for starting the usbb2k-api project doing much of + the reverse engineering. + - Martin Diehl, for pointing out how to handle USB memory allocation. + - Dmitry Torokhov, for the numerous code reviews and suggestions. + diff --git a/trunk/Documentation/ioctl/cdrom.txt b/trunk/Documentation/ioctl/cdrom.txt index 4ccdcc6fe364..8ec32cc49eb1 100644 --- a/trunk/Documentation/ioctl/cdrom.txt +++ b/trunk/Documentation/ioctl/cdrom.txt @@ -878,7 +878,7 @@ DVD_READ_STRUCT Read structure error returns: EINVAL physical.layer_num exceeds number of layers - EIO Recieved invalid response from drive + EIO Received invalid response from drive diff --git a/trunk/Documentation/kbuild/makefiles.txt b/trunk/Documentation/kbuild/makefiles.txt index 9a1586590d82..d802ce88bedc 100644 --- a/trunk/Documentation/kbuild/makefiles.txt +++ b/trunk/Documentation/kbuild/makefiles.txt @@ -31,7 +31,7 @@ This document describes the Linux kernel Makefiles. === 6 Architecture Makefiles --- 6.1 Set variables to tweak the build to the architecture - --- 6.2 Add prerequisites to prepare: + --- 6.2 Add prerequisites to archprepare: --- 6.3 List directories to visit when descending --- 6.4 Architecture specific boot images --- 6.5 Building non-kbuild targets @@ -734,18 +734,18 @@ When kbuild executes the following steps are followed (roughly): for loadable kernel modules. ---- 6.2 Add prerequisites to prepare: +--- 6.2 Add prerequisites to archprepare: - The prepare: rule is used to list prerequisites that needs to be + The archprepare: rule is used to list prerequisites that needs to be built before starting to descend down in the subdirectories. This is usual header files containing assembler constants. Example: - #arch/s390/Makefile - prepare: include/asm-$(ARCH)/offsets.h + #arch/arm/Makefile + archprepare: maketools - In this example the file include/asm-$(ARCH)/offsets.h will - be built before descending down in the subdirectories. + In this example the file target maketools will be processed + before descending down in the subdirectories. See also chapter XXX-TODO that describe how kbuild supports generating offset header files. diff --git a/trunk/Documentation/kdump/kdump.txt b/trunk/Documentation/kdump/kdump.txt index 7ff213f4becd..5f08f9ce6046 100644 --- a/trunk/Documentation/kdump/kdump.txt +++ b/trunk/Documentation/kdump/kdump.txt @@ -39,8 +39,7 @@ SETUP and apply http://lse.sourceforge.net/kdump/patches/kexec-tools-1.101-kdump.patch and after that build the source. -2) Download and build the appropriate (latest) kexec/kdump (-mm) kernel - patchset and apply it to the vanilla kernel tree. +2) Download and build the appropriate (2.6.13-rc1 onwards) vanilla kernel. Two kernels need to be built in order to get this feature working. @@ -67,11 +66,11 @@ SETUP c) Enable "/proc/vmcore support" (Optional, in Pseudo filesystems). CONFIG_PROC_VMCORE=y d) Disable SMP support and build a UP kernel (Until it is fixed). - CONFIG_SMP=n + CONFIG_SMP=n e) Enable "Local APIC support on uniprocessors". - CONFIG_X86_UP_APIC=y + CONFIG_X86_UP_APIC=y f) Enable "IO-APIC support on uniprocessors" - CONFIG_X86_UP_IOAPIC=y + CONFIG_X86_UP_IOAPIC=y Note: i) Options a) and b) depend upon "Configure standard kernel features (for small systems)" (under General setup). @@ -84,17 +83,23 @@ SETUP 4) Load the second kernel to be booted using: - kexec -p --crash-dump --args-linux --append="root= - init 1 irqpoll" + kexec -p --args-linux --elf32-core-headers + --append="root= init 1 irqpoll" Note: i) has to be a vmlinux image. bzImage will not work, as of now. - ii) By default ELF headers are stored in ELF32 format (for i386). This - is sufficient to represent the physical memory up to 4GB. To store - headers in ELF64 format, specifiy "--elf64-core-headers" on the - kexec command line additionally. + ii) By default ELF headers are stored in ELF64 format. Option + --elf32-core-headers forces generation of ELF32 headers. gdb can + not open ELF64 headers on 32 bit systems. So creating ELF32 + headers can come handy for users who have got non-PAE systems and + hence have memory less than 4GB. iii) Specify "irqpoll" as command line parameter. This reduces driver initialization failures in second kernel due to shared interrupts. + iv) needs to be specified in a format corresponding to + the root device name in the output of mount command. + v) If you have built the drivers required to mount root file + system as modules in , then, specify + --initrd=. 5) System reboots into the second kernel when a panic occurs. A module can be written to force the panic or "ALT-SysRq-c" can be used initiate a crash diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 3d5cd7a09b2f..7086f0a90d14 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -164,6 +164,15 @@ running once the system is up. over-ride platform specific driver. See also Documentation/acpi-hotkey.txt. + enable_timer_pin_1 [i386,x86-64] + Enable PIN 1 of APIC timer + Can be useful to work around chipset bugs (in particular on some ATI chipsets) + The kernel tries to set a reasonable default. + + disable_timer_pin_1 [i386,x86-64] + Disable PIN 1 of APIC timer + Can be useful to work around chipset bugs. + ad1816= [HW,OSS] Format: ,,, See also Documentation/sound/oss/AD1816. @@ -549,6 +558,7 @@ running once the system is up. keyboard and can not control its state (Don't attempt to blink the leds) i8042.noaux [HW] Don't check for auxiliary (== mouse) port + i8042.nokbd [HW] Don't check/create keyboard port i8042.nomux [HW] Don't check presence of an active multiplexing controller i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX @@ -1174,6 +1184,11 @@ running once the system is up. New name for the ramdisk parameter. See Documentation/ramdisk.txt. + rdinit= [KNL] + Format: + Run specified binary instead of /init from the ramdisk, + used for early userspace startup. See initrd. + reboot= [BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode Format: [,[,...]] See arch/*/kernel/reboot.c. diff --git a/trunk/Documentation/keys-request-key.txt b/trunk/Documentation/keys-request-key.txt new file mode 100644 index 000000000000..5f2b9c5edbb5 --- /dev/null +++ b/trunk/Documentation/keys-request-key.txt @@ -0,0 +1,161 @@ + =================== + KEY REQUEST SERVICE + =================== + +The key request service is part of the key retention service (refer to +Documentation/keys.txt). This document explains more fully how that the +requesting algorithm works. + +The process starts by either the kernel requesting a service by calling +request_key(): + + struct key *request_key(const struct key_type *type, + const char *description, + const char *callout_string); + +Or by userspace invoking the request_key system call: + + key_serial_t request_key(const char *type, + const char *description, + const char *callout_info, + key_serial_t dest_keyring); + +The main difference between the two access points is that the in-kernel +interface does not need to link the key to a keyring to prevent it from being +immediately destroyed. The kernel interface returns a pointer directly to the +key, and it's up to the caller to destroy the key. + +The userspace interface links the key to a keyring associated with the process +to prevent the key from going away, and returns the serial number of the key to +the caller. + + +=========== +THE PROCESS +=========== + +A request proceeds in the following manner: + + (1) Process A calls request_key() [the userspace syscall calls the kernel + interface]. + + (2) request_key() searches the process's subscribed keyrings to see if there's + a suitable key there. If there is, it returns the key. If there isn't, and + callout_info is not set, an error is returned. Otherwise the process + proceeds to the next step. + + (3) request_key() sees that A doesn't have the desired key yet, so it creates + two things: + + (a) An uninstantiated key U of requested type and description. + + (b) An authorisation key V that refers to key U and notes that process A + is the context in which key U should be instantiated and secured, and + from which associated key requests may be satisfied. + + (4) request_key() then forks and executes /sbin/request-key with a new session + keyring that contains a link to auth key V. + + (5) /sbin/request-key execs an appropriate program to perform the actual + instantiation. + + (6) The program may want to access another key from A's context (say a + Kerberos TGT key). It just requests the appropriate key, and the keyring + search notes that the session keyring has auth key V in its bottom level. + + This will permit it to then search the keyrings of process A with the + UID, GID, groups and security info of process A as if it was process A, + and come up with key W. + + (7) The program then does what it must to get the data with which to + instantiate key U, using key W as a reference (perhaps it contacts a + Kerberos server using the TGT) and then instantiates key U. + + (8) Upon instantiating key U, auth key V is automatically revoked so that it + may not be used again. + + (9) The program then exits 0 and request_key() deletes key V and returns key + U to the caller. + +This also extends further. If key W (step 5 above) didn't exist, key W would be +created uninstantiated, another auth key (X) would be created [as per step 3] +and another copy of /sbin/request-key spawned [as per step 4]; but the context +specified by auth key X will still be process A, as it was in auth key V. + +This is because process A's keyrings can't simply be attached to +/sbin/request-key at the appropriate places because (a) execve will discard two +of them, and (b) it requires the same UID/GID/Groups all the way through. + + +====================== +NEGATIVE INSTANTIATION +====================== + +Rather than instantiating a key, it is possible for the possessor of an +authorisation key to negatively instantiate a key that's under construction. +This is a short duration placeholder that causes any attempt at re-requesting +the key whilst it exists to fail with error ENOKEY. + +This is provided to prevent excessive repeated spawning of /sbin/request-key +processes for a key that will never be obtainable. + +Should the /sbin/request-key process exit anything other than 0 or die on a +signal, the key under construction will be automatically negatively +instantiated for a short amount of time. + + +==================== +THE SEARCH ALGORITHM +==================== + +A search of any particular keyring proceeds in the following fashion: + + (1) When the key management code searches for a key (keyring_search_aux) it + firstly calls key_permission(SEARCH) on the keyring it's starting with, + if this denies permission, it doesn't search further. + + (2) It considers all the non-keyring keys within that keyring and, if any key + matches the criteria specified, calls key_permission(SEARCH) on it to see + if the key is allowed to be found. If it is, that key is returned; if + not, the search continues, and the error code is retained if of higher + priority than the one currently set. + + (3) It then considers all the keyring-type keys in the keyring it's currently + searching. It calls key_permission(SEARCH) on each keyring, and if this + grants permission, it recurses, executing steps (2) and (3) on that + keyring. + +The process stops immediately a valid key is found with permission granted to +use it. Any error from a previous match attempt is discarded and the key is +returned. + +When search_process_keyrings() is invoked, it performs the following searches +until one succeeds: + + (1) If extant, the process's thread keyring is searched. + + (2) If extant, the process's process keyring is searched. + + (3) The process's session keyring is searched. + + (4) If the process has a request_key() authorisation key in its session + keyring then: + + (a) If extant, the calling process's thread keyring is searched. + + (b) If extant, the calling process's process keyring is searched. + + (c) The calling process's session keyring is searched. + +The moment one succeeds, all pending errors are discarded and the found key is +returned. + +Only if all these fail does the whole thing fail with the highest priority +error. Note that several errors may have come from LSM. + +The error priority is: + + EKEYREVOKED > EKEYEXPIRED > ENOKEY + +EACCES/EPERM are only returned on a direct search of a specific keyring where +the basal keyring does not grant Search permission. diff --git a/trunk/Documentation/keys.txt b/trunk/Documentation/keys.txt index 0321ded4b9ae..4afe03a58c5b 100644 --- a/trunk/Documentation/keys.txt +++ b/trunk/Documentation/keys.txt @@ -195,8 +195,8 @@ KEY ACCESS PERMISSIONS ====================== Keys have an owner user ID, a group access ID, and a permissions mask. The mask -has up to eight bits each for user, group and other access. Only five of each -set of eight bits are defined. These permissions granted are: +has up to eight bits each for possessor, user, group and other access. Only +five of each set of eight bits are defined. These permissions granted are: (*) View @@ -241,16 +241,16 @@ about the status of the key service: type, description and permissions. The payload of the key is not available this way: - SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY - 00000001 I----- 39 perm 1f0000 0 0 keyring _uid_ses.0: 1/4 - 00000002 I----- 2 perm 1f0000 0 0 keyring _uid.0: empty - 00000007 I----- 1 perm 1f0000 0 0 keyring _pid.1: empty - 0000018d I----- 1 perm 1f0000 0 0 keyring _pid.412: empty - 000004d2 I--Q-- 1 perm 1f0000 32 -1 keyring _uid.32: 1/4 - 000004d3 I--Q-- 3 perm 1f0000 32 -1 keyring _uid_ses.32: empty - 00000892 I--QU- 1 perm 1f0000 0 0 user metal:copper: 0 - 00000893 I--Q-N 1 35s 1f0000 0 0 user metal:silver: 0 - 00000894 I--Q-- 1 10h 1f0000 0 0 user metal:gold: 0 + SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY + 00000001 I----- 39 perm 1f1f0000 0 0 keyring _uid_ses.0: 1/4 + 00000002 I----- 2 perm 1f1f0000 0 0 keyring _uid.0: empty + 00000007 I----- 1 perm 1f1f0000 0 0 keyring _pid.1: empty + 0000018d I----- 1 perm 1f1f0000 0 0 keyring _pid.412: empty + 000004d2 I--Q-- 1 perm 1f1f0000 32 -1 keyring _uid.32: 1/4 + 000004d3 I--Q-- 3 perm 1f1f0000 32 -1 keyring _uid_ses.32: empty + 00000892 I--QU- 1 perm 1f000000 0 0 user metal:copper: 0 + 00000893 I--Q-N 1 35s 1f1f0000 0 0 user metal:silver: 0 + 00000894 I--Q-- 1 10h 001f0000 0 0 user metal:gold: 0 The flags are: @@ -361,6 +361,8 @@ The main syscalls are: /sbin/request-key will be invoked in an attempt to obtain a key. The callout_info string will be passed as an argument to the program. + See also Documentation/keys-request-key.txt. + The keyctl syscall functions are: @@ -533,8 +535,8 @@ The keyctl syscall functions are: (*) Read the payload data from a key: - key_serial_t keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, - size_t buflen); + long keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, + size_t buflen); This function attempts to read the payload data from the specified key into the buffer. The process must have read permission on the key to @@ -555,9 +557,9 @@ The keyctl syscall functions are: (*) Instantiate a partially constructed key. - key_serial_t keyctl(KEYCTL_INSTANTIATE, key_serial_t key, - const void *payload, size_t plen, - key_serial_t keyring); + long keyctl(KEYCTL_INSTANTIATE, key_serial_t key, + const void *payload, size_t plen, + key_serial_t keyring); If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call to supply data for the key before the @@ -576,8 +578,8 @@ The keyctl syscall functions are: (*) Negatively instantiate a partially constructed key. - key_serial_t keyctl(KEYCTL_NEGATE, key_serial_t key, - unsigned timeout, key_serial_t keyring); + long keyctl(KEYCTL_NEGATE, key_serial_t key, + unsigned timeout, key_serial_t keyring); If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call mark the key as negative before the @@ -637,6 +639,34 @@ call, and the key released upon close. How to deal with conflicting keys due to two different users opening the same file is left to the filesystem author to solve. +Note that there are two different types of pointers to keys that may be +encountered: + + (*) struct key * + + This simply points to the key structure itself. Key structures will be at + least four-byte aligned. + + (*) key_ref_t + + This is equivalent to a struct key *, but the least significant bit is set + if the caller "possesses" the key. By "possession" it is meant that the + calling processes has a searchable link to the key from one of its + keyrings. There are three functions for dealing with these: + + key_ref_t make_key_ref(const struct key *key, + unsigned long possession); + + struct key *key_ref_to_ptr(const key_ref_t key_ref); + + unsigned long is_key_possessed(const key_ref_t key_ref); + + The first function constructs a key reference from a key pointer and + possession information (which must be 0 or 1 and not any other value). + + The second function retrieves the key pointer from a reference and the + third retrieves the possession flag. + When accessing a key's payload contents, certain precautions must be taken to prevent access vs modification races. See the section "Notes on accessing payload contents" for more information. @@ -660,12 +690,18 @@ payload contents" for more information. If successful, the key will have been attached to the default keyring for implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING. + See also Documentation/keys-request-key.txt. + (*) When it is no longer required, the key should be released using: void key_put(struct key *key); - This can be called from interrupt context. If CONFIG_KEYS is not set then + Or: + + void key_ref_put(key_ref_t key_ref); + + These can be called from interrupt context. If CONFIG_KEYS is not set then the argument will not be parsed. @@ -689,13 +725,17 @@ payload contents" for more information. (*) If a keyring was found in the search, this can be further searched by: - struct key *keyring_search(struct key *keyring, - const struct key_type *type, - const char *description) + key_ref_t keyring_search(key_ref_t keyring_ref, + const struct key_type *type, + const char *description) This searches the keyring tree specified for a matching key. Error ENOKEY - is returned upon failure. If successful, the returned key will need to be - released. + is returned upon failure (use IS_ERR/PTR_ERR to determine). If successful, + the returned key will need to be released. + + The possession attribute from the keyring reference is used to control + access through the permissions mask and is propagated to the returned key + reference pointer if successful. (*) To check the validity of a key, this function can be called: @@ -732,7 +772,7 @@ More complex payload contents must be allocated and a pointer to them set in key->payload.data. One of the following ways must be selected to access the data: - (1) Unmodifyable key type. + (1) Unmodifiable key type. If the key type does not have a modify method, then the key's payload can be accessed without any form of locking, provided that it's known to be diff --git a/trunk/Documentation/mono.txt b/trunk/Documentation/mono.txt index 6739ab9615ef..807a0c7b4737 100644 --- a/trunk/Documentation/mono.txt +++ b/trunk/Documentation/mono.txt @@ -30,7 +30,7 @@ other program after you have done the following: Read the file 'binfmt_misc.txt' in this directory to know more about the configuration process. -3) Add the following enries to /etc/rc.local or similar script +3) Add the following entries to /etc/rc.local or similar script to be run at system startup: # Insert BINFMT_MISC module into the kernel diff --git a/trunk/Documentation/networking/bonding.txt b/trunk/Documentation/networking/bonding.txt index 24d029455baa..a55f0f95b171 100644 --- a/trunk/Documentation/networking/bonding.txt +++ b/trunk/Documentation/networking/bonding.txt @@ -1241,7 +1241,7 @@ traffic while still maintaining carrier on. If running SNMP agents, the bonding driver should be loaded before any network drivers participating in a bond. This requirement -is due to the the interface index (ipAdEntIfIndex) being associated to +is due to the interface index (ipAdEntIfIndex) being associated to the first interface found with a given IP address. That is, there is only one ipAdEntIfIndex for each IP address. For example, if eth0 and eth1 are slaves of bond0 and the driver for eth0 is loaded before the @@ -1937,7 +1937,7 @@ switches currently available support 802.3ad. If not explicitly configured (with ifconfig or ip link), the MAC address of the bonding device is taken from its first slave device. This MAC address is then passed to all following slaves and -remains persistent (even if the the first slave is removed) until the +remains persistent (even if the first slave is removed) until the bonding device is brought down or reconfigured. If you wish to change the MAC address, you can set it with diff --git a/trunk/Documentation/networking/ip-sysctl.txt b/trunk/Documentation/networking/ip-sysctl.txt index ab65714d95fc..b433c8a27e2d 100644 --- a/trunk/Documentation/networking/ip-sysctl.txt +++ b/trunk/Documentation/networking/ip-sysctl.txt @@ -355,10 +355,14 @@ ip_dynaddr - BOOLEAN Default: 0 icmp_echo_ignore_all - BOOLEAN + If set non-zero, then the kernel will ignore all ICMP ECHO + requests sent to it. + Default: 0 + icmp_echo_ignore_broadcasts - BOOLEAN - If either is set to true, then the kernel will ignore either all - ICMP ECHO requests sent to it or just those to broadcast/multicast - addresses, respectively. + If set non-zero, then the kernel will ignore all ICMP ECHO and + TIMESTAMP requests sent to it via broadcast/multicast. + Default: 1 icmp_ratelimit - INTEGER Limit the maximal rates for sending ICMP packets whose type matches diff --git a/trunk/Documentation/networking/wan-router.txt b/trunk/Documentation/networking/wan-router.txt index aea20cd2a56e..c96897aa08b6 100644 --- a/trunk/Documentation/networking/wan-router.txt +++ b/trunk/Documentation/networking/wan-router.txt @@ -355,7 +355,7 @@ REVISION HISTORY There is no functional difference between the two packages 2.0.7 Aug 26, 1999 o Merged X25API code into WANPIPE. - o Fixed a memeory leak for X25API + o Fixed a memory leak for X25API o Updated the X25API code for 2.2.X kernels. o Improved NEM handling. @@ -514,7 +514,7 @@ beta2-2.2.0 Jan 8 2001 o Patches for 2.4.0 kernel o Patches for 2.2.18 kernel o Minor updates to PPP and CHLDC drivers. - Note: No functinal difference. + Note: No functional difference. beta3-2.2.9 Jan 10 2001 o I missed the 2.2.18 kernel patches in beta2-2.2.0 diff --git a/trunk/Documentation/oops-tracing.txt b/trunk/Documentation/oops-tracing.txt index da711028e5f7..66eaaab7773d 100644 --- a/trunk/Documentation/oops-tracing.txt +++ b/trunk/Documentation/oops-tracing.txt @@ -205,8 +205,8 @@ Phone: 701-234-7556 Tainted kernels: Some oops reports contain the string 'Tainted: ' after the program -counter, this indicates that the kernel has been tainted by some -mechanism. The string is followed by a series of position sensitive +counter. This indicates that the kernel has been tainted by some +mechanism. The string is followed by a series of position-sensitive characters, each representing a particular tainted value. 1: 'G' if all modules loaded have a GPL or compatible license, 'P' if @@ -214,16 +214,25 @@ characters, each representing a particular tainted value. MODULE_LICENSE or with a MODULE_LICENSE that is not recognised by insmod as GPL compatible are assumed to be proprietary. - 2: 'F' if any module was force loaded by insmod -f, ' ' if all + 2: 'F' if any module was force loaded by "insmod -f", ' ' if all modules were loaded normally. 3: 'S' if the oops occurred on an SMP kernel running on hardware that - hasn't been certified as safe to run multiprocessor. - Currently this occurs only on various Athlons that are not - SMP capable. + hasn't been certified as safe to run multiprocessor. + Currently this occurs only on various Athlons that are not + SMP capable. + + 4: 'R' if a module was force unloaded by "rmmod -f", ' ' if all + modules were unloaded normally. + + 5: 'M' if any processor has reported a Machine Check Exception, + ' ' if no Machine Check Exceptions have occurred. + + 6: 'B' if a page-release function has found a bad page reference or + some unexpected page flags. The primary reason for the 'Tainted: ' string is to tell kernel debuggers if this is a clean kernel or if anything unusual has -occurred. Tainting is permanent, even if an offending module is -unloading the tainted value remains to indicate that the kernel is not +occurred. Tainting is permanent: even if an offending module is +unloaded, the tainted value remains to indicate that the kernel is not trustworthy. diff --git a/trunk/Documentation/pci.txt b/trunk/Documentation/pci.txt index 76d28d033657..711210b38f5f 100644 --- a/trunk/Documentation/pci.txt +++ b/trunk/Documentation/pci.txt @@ -84,7 +84,7 @@ Each entry consists of: Most drivers don't need to use the driver_data field. Best practice for use of driver_data is to use it as an index into a static list of -equivalant device types, not to use it as a pointer. +equivalent device types, not to use it as a pointer. Have a table entry {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID} to have probe() called for every PCI device known to the system. diff --git a/trunk/Documentation/pm.txt b/trunk/Documentation/pm.txt index cc63ae18d147..2ea1149bf6b0 100644 --- a/trunk/Documentation/pm.txt +++ b/trunk/Documentation/pm.txt @@ -38,6 +38,12 @@ system the associated daemon will exit gracefully. Driver Interface -- OBSOLETE, DO NOT USE! ----------------************************* + +Note: pm_register(), pm_access(), pm_dev_idle() and friends are +obsolete. Please do not use them. Instead you should properly hook +your driver into the driver model, and use its suspend()/resume() +callbacks to do this kind of stuff. + If you are writing a new driver or maintaining an old driver, it should include power management support. Without power management support, a single driver may prevent a system with power management diff --git a/trunk/Documentation/power/swsusp.txt b/trunk/Documentation/power/swsusp.txt index ddf907fbcc05..b0d50840788e 100644 --- a/trunk/Documentation/power/swsusp.txt +++ b/trunk/Documentation/power/swsusp.txt @@ -1,22 +1,20 @@ -From kernel/suspend.c: +Some warnings, first. * BIG FAT WARNING ********************************************************* * - * If you have unsupported (*) devices using DMA... - * ...say goodbye to your data. - * * If you touch anything on disk between suspend and resume... * ...kiss your data goodbye. * - * If your disk driver does not support suspend... (IDE does) - * ...you'd better find out how to get along - * without your data. - * - * If you change kernel command line between suspend and resume... - * ...prepare for nasty fsck or worse. + * If you do resume from initrd after your filesystems are mounted... + * ...bye bye root partition. + * [this is actually same case as above] * - * If you change your hardware while system is suspended... - * ...well, it was not good idea. + * If you have unsupported (*) devices using DMA, you may have some + * problems. If your disk driver does not support suspend... (IDE does), + * it may cause some problems, too. If you change kernel command line + * between suspend and resume, it may do something wrong. If you change + * your hardware while system is suspended... well, it was not good idea; + * but it will probably only crash. * * (*) suspend/resume support is needed to make it safe. @@ -30,6 +28,13 @@ echo shutdown > /sys/power/disk; echo disk > /sys/power/state echo platform > /sys/power/disk; echo disk > /sys/power/state +Encrypted suspend image: +------------------------ +If you want to store your suspend image encrypted with a temporary +key to prevent data gathering after resume you must compile +crypto and the aes algorithm into the kernel - modules won't work +as they cannot be loaded at resume time. + Article about goals and implementation of Software Suspend for Linux ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -85,11 +90,6 @@ resume. You have your server on UPS. Power died, and UPS is indicating 30 seconds to failure. What do you do? Suspend to disk. -Ethernet card in your server died. You want to replace it. Your -server is not hotplug capable. What do you do? Suspend to disk, -replace ethernet card, resume. If you are fast your users will not -even see broken connections. - Q: Maybe I'm missing something, but why don't the regular I/O paths work? @@ -117,31 +117,6 @@ Q: Does linux support ACPI S4? A: Yes. That's what echo platform > /sys/power/disk does. -Q: My machine doesn't work with ACPI. How can I use swsusp than ? - -A: Do a reboot() syscall with right parameters. Warning: glibc gets in -its way, so check with strace: - -reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, 0xd000fce2) - -(Thanks to Peter Osterlund:) - -#include -#include - -#define LINUX_REBOOT_MAGIC1 0xfee1dead -#define LINUX_REBOOT_MAGIC2 672274793 -#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2 - -int main() -{ - syscall(SYS_reboot, LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, - LINUX_REBOOT_CMD_SW_SUSPEND, 0); - return 0; -} - -Also /sys/ interface should be still present. - Q: What is 'suspend2'? A: suspend2 is 'Software Suspend 2', a forked implementation of @@ -312,9 +287,45 @@ system is shut down or suspended. Additionally use the encrypted suspend image to prevent sensitive data from being stolen after resume. -Q: Why we cannot suspend to a swap file? +Q: Why can't we suspend to a swap file? A: Because accessing swap file needs the filesystem mounted, and filesystem might do something wrong (like replaying the journal) -during mount. [Probably could be solved by modifying every filesystem -to support some kind of "really read-only!" option. Patches welcome.] +during mount. + +There are few ways to get that fixed: + +1) Probably could be solved by modifying every filesystem to support +some kind of "really read-only!" option. Patches welcome. + +2) suspend2 gets around that by storing absolute positions in on-disk +image (and blocksize), with resume parameter pointing directly to +suspend header. + +Q: Is there a maximum system RAM size that is supported by swsusp? + +A: It should work okay with highmem. + +Q: Does swsusp (to disk) use only one swap partition or can it use +multiple swap partitions (aggregate them into one logical space)? + +A: Only one swap partition, sorry. + +Q: If my application(s) causes lots of memory & swap space to be used +(over half of the total system RAM), is it correct that it is likely +to be useless to try to suspend to disk while that app is running? + +A: No, it should work okay, as long as your app does not mlock() +it. Just prepare big enough swap partition. + +Q: What information is usefull for debugging suspend-to-disk problems? + +A: Well, last messages on the screen are always useful. If something +is broken, it is usually some kernel driver, therefore trying with as +little as possible modules loaded helps a lot. I also prefer people to +suspend from console, preferably without X running. Booting with +init=/bin/bash, then swapon and starting suspend sequence manually +usually does the trick. Then it is good idea to try with latest +vanilla kernel. + + diff --git a/trunk/Documentation/power/video.txt b/trunk/Documentation/power/video.txt index 1a44e8acb54c..526d6dd267ea 100644 --- a/trunk/Documentation/power/video.txt +++ b/trunk/Documentation/power/video.txt @@ -120,6 +120,7 @@ IBM ThinkPad T42p (2373-GTG) s3_bios (2) IBM TP X20 ??? (*) IBM TP X30 s3_bios (2) IBM TP X31 / Type 2672-XXH none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight. +IBM TP X32 none (1), but backlight is on and video is trashed after long suspend IBM Thinkpad X40 Type 2371-7JG s3_bios,s3_mode (4) Medion MD4220 ??? (*) Samsung P35 vbetool needed (6) diff --git a/trunk/Documentation/powerpc/eeh-pci-error-recovery.txt b/trunk/Documentation/powerpc/eeh-pci-error-recovery.txt index 2bfe71beec5b..e75d7474322c 100644 --- a/trunk/Documentation/powerpc/eeh-pci-error-recovery.txt +++ b/trunk/Documentation/powerpc/eeh-pci-error-recovery.txt @@ -134,7 +134,7 @@ pci_get_device_by_addr() will find the pci device associated with that address (if any). The default include/asm-ppc64/io.h macros readb(), inb(), insb(), -etc. include a check to see if the the i/o read returned all-0xff's. +etc. include a check to see if the i/o read returned all-0xff's. If so, these make a call to eeh_dn_check_failure(), which in turn asks the firmware if the all-ff's value is the sign of a true EEH error. If it is not, processing continues as normal. The grand diff --git a/trunk/Documentation/s390/s390dbf.txt b/trunk/Documentation/s390/s390dbf.txt index e24fdeada970..e321a8ed2a2d 100644 --- a/trunk/Documentation/s390/s390dbf.txt +++ b/trunk/Documentation/s390/s390dbf.txt @@ -468,7 +468,7 @@ The hex_ascii view shows the data field in hex and ascii representation The raw view returns a bytestream as the debug areas are stored in memory. The sprintf view formats the debug entries in the same way as the sprintf -function would do. The sprintf event/expection fuctions write to the +function would do. The sprintf event/expection functions write to the debug entry a pointer to the format string (size = sizeof(long)) and for each vararg a long value. So e.g. for a debug entry with a format string plus two varargs one would need to allocate a (3 * sizeof(long)) diff --git a/trunk/Documentation/scsi/00-INDEX b/trunk/Documentation/scsi/00-INDEX index f9cb5bdcce41..fef92ebf266f 100644 --- a/trunk/Documentation/scsi/00-INDEX +++ b/trunk/Documentation/scsi/00-INDEX @@ -60,6 +60,8 @@ scsi.txt - short blurb on using SCSI support as a module. scsi_mid_low_api.txt - info on API between SCSI layer and low level drivers +scsi_eh.txt + - info on SCSI midlayer error handling infrastructure st.txt - info on scsi tape driver sym53c500_cs.txt diff --git a/trunk/Documentation/scsi/aic7xxx.txt b/trunk/Documentation/scsi/aic7xxx.txt index 160e7354cd1e..47e74ddc4bc9 100644 --- a/trunk/Documentation/scsi/aic7xxx.txt +++ b/trunk/Documentation/scsi/aic7xxx.txt @@ -1,5 +1,5 @@ ==================================================================== -= Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v6.2.28 = += Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0 = = README for = = The Linux Operating System = ==================================================================== @@ -131,6 +131,10 @@ The following information is available in this file: SCSI "stub" effects. 2. Version History + 7.0 (4th August, 2005) + - Updated driver to use SCSI transport class infrastructure + - Upported sequencer and core fixes from last adaptec released + version of the driver. 6.2.36 (June 3rd, 2003) - Correct code that disables PCI parity error checking. - Correct and simplify handling of the ignore wide residue diff --git a/trunk/Documentation/scsi/ibmmca.txt b/trunk/Documentation/scsi/ibmmca.txt index 2814491600ff..2ffb3ae0ef4d 100644 --- a/trunk/Documentation/scsi/ibmmca.txt +++ b/trunk/Documentation/scsi/ibmmca.txt @@ -344,7 +344,7 @@ /proc/scsi/ibmmca/. ibmmca_proc_info() provides this information. This table is quite informative for interested users. It shows the load - of commands on the subsystem and wether you are running the bypassed + of commands on the subsystem and whether you are running the bypassed (software) or integrated (hardware) SCSI-command set (see below). The amount of accesses is shown. Read, write, modeselect is shown separately in order to help debugging problems with CD-ROMs or tapedrives. diff --git a/trunk/Documentation/scsi/scsi_eh.txt b/trunk/Documentation/scsi/scsi_eh.txt new file mode 100644 index 000000000000..534a50922a7b --- /dev/null +++ b/trunk/Documentation/scsi/scsi_eh.txt @@ -0,0 +1,479 @@ + +SCSI EH +====================================== + + This document describes SCSI midlayer error handling infrastructure. +Please refer to Documentation/scsi/scsi_mid_low_api.txt for more +information regarding SCSI midlayer. + +TABLE OF CONTENTS + +[1] How SCSI commands travel through the midlayer and to EH + [1-1] struct scsi_cmnd + [1-2] How do scmd's get completed? + [1-2-1] Completing a scmd w/ scsi_done + [1-2-2] Completing a scmd w/ timeout + [1-3] How EH takes over +[2] How SCSI EH works + [2-1] EH through fine-grained callbacks + [2-1-1] Overview + [2-1-2] Flow of scmds through EH + [2-1-3] Flow of control + [2-2] EH through hostt->eh_strategy_handler() + [2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions + [2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions + [2-2-3] Things to consider + + +[1] How SCSI commands travel through the midlayer and to EH + +[1-1] struct scsi_cmnd + + Each SCSI command is represented with struct scsi_cmnd (== scmd). A +scmd has two list_head's to link itself into lists. The two are +scmd->list and scmd->eh_entry. The former is used for free list or +per-device allocated scmd list and not of much interest to this EH +discussion. The latter is used for completion and EH lists and unless +otherwise stated scmds are always linked using scmd->eh_entry in this +discussion. + + +[1-2] How do scmd's get completed? + + Once LLDD gets hold of a scmd, either the LLDD will complete the +command by calling scsi_done callback passed from midlayer when +invoking hostt->queuecommand() or SCSI midlayer will time it out. + + +[1-2-1] Completing a scmd w/ scsi_done + + For all non-EH commands, scsi_done() is the completion callback. It +does the following. + + 1. Delete timeout timer. If it fails, it means that timeout timer + has expired and is going to finish the command. Just return. + + 2. Link scmd to per-cpu scsi_done_q using scmd->en_entry + + 3. Raise SCSI_SOFTIRQ + + SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to +determine what to do with the command. scsi_decide_disposition() +looks at the scmd->result value and sense data to determine what to do +with the command. + + - SUCCESS + scsi_finish_command() is invoked for the command. The + function does some maintenance choirs and notify completion by + calling scmd->done() callback, which, for fs requests, would + be HLD completion callback - sd:sd_rw_intr, sr:rw_intr, + st:st_intr. + + - NEEDS_RETRY + - ADD_TO_MLQUEUE + scmd is requeued to blk queue. + + - otherwise + scsi_eh_scmd_add(scmd, 0) is invoked for the command. See + [1-3] for details of this funciton. + + +[1-2-2] Completing a scmd w/ timeout + + The timeout handler is scsi_times_out(). When a timeout occurs, this +function + + 1. invokes optional hostt->eh_timedout() callback. Return value can + be one of + + - EH_HANDLED + This indicates that eh_timedout() dealt with the timeout. The + scmd is passed to __scsi_done() and thus linked into per-cpu + scsi_done_q. Normal command completion described in [1-2-1] + follows. + + - EH_RESET_TIMER + This indicates that more time is required to finish the + command. Timer is restarted. This action is counted as a + retry and only allowed scmd->allowed + 1(!) times. Once the + limit is reached, action for EH_NOT_HANDLED is taken instead. + + *NOTE* This action is racy as the LLDD could finish the scmd + after the timeout has expired but before it's added back. In + such cases, scsi_done() would think that timeout has occurred + and return without doing anything. We lose completion and the + command will time out again. + + - EH_NOT_HANDLED + This is the same as when eh_timedout() callback doesn't exist. + Step #2 is taken. + + 2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the + command. See [1-3] for more information. + + +[1-3] How EH takes over + + scmds enter EH via scsi_eh_scmd_add(), which does the following. + + 1. Turns on scmd->eh_eflags as requested. It's 0 for error + completions and SCSI_EH_CANCEL_CMD for timeouts. + + 2. Links scmd->eh_entry to shost->eh_cmd_q + + 3. Sets SHOST_RECOVERY bit in shost->shost_state + + 4. Increments shost->host_failed + + 5. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed + + As can be seen above, once any scmd is added to shost->eh_cmd_q, +SHOST_RECOVERY shost_state bit is turned on. This prevents any new +scmd to be issued from blk queue to the host; eventually, all scmds on +the host either complete normally, fail and get added to eh_cmd_q, or +time out and get added to shost->eh_cmd_q. + + If all scmds either complete or fail, the number of in-flight scmds +becomes equal to the number of failed scmds - i.e. shost->host_busy == +shost->host_failed. This wakes up SCSI EH thread. So, once woken up, +SCSI EH thread can expect that all in-flight commands have failed and +are linked on shost->eh_cmd_q. + + Note that this does not mean lower layers are quiescent. If a LLDD +completed a scmd with error status, the LLDD and lower layers are +assumed to forget about the scmd at that point. However, if a scmd +has timed out, unless hostt->eh_timedout() made lower layers forget +about the scmd, which currently no LLDD does, the command is still +active as long as lower layers are concerned and completion could +occur at any time. Of course, all such completions are ignored as the +timer has already expired. + + We'll talk about how SCSI EH takes actions to abort - make LLDD +forget about - timed out scmds later. + + +[2] How SCSI EH works + + LLDD's can implement SCSI EH actions in one of the following two +ways. + + - Fine-grained EH callbacks + LLDD can implement fine-grained EH callbacks and let SCSI + midlayer drive error handling and call appropriate callbacks. + This will be dicussed further in [2-1]. + + - eh_strategy_handler() callback + This is one big callback which should perform whole error + handling. As such, it should do all choirs SCSI midlayer + performs during recovery. This will be discussed in [2-2]. + + Once recovery is complete, SCSI EH resumes normal operation by +calling scsi_restart_operations(), which + + 1. Checks if door locking is needed and locks door. + + 2. Clears SHOST_RECOVERY shost_state bit + + 3. Wakes up waiters on shost->host_wait. This occurs if someone + calls scsi_block_when_processing_errors() on the host. + (*QUESTION* why is it needed? All operations will be blocked + anyway after it reaches blk queue.) + + 4. Kicks queues in all devices on the host in the asses + + +[2-1] EH through fine-grained callbacks + +[2-1-1] Overview + + If eh_strategy_handler() is not present, SCSI midlayer takes charge +of driving error handling. EH's goals are two - make LLDD, host and +device forget about timed out scmds and make them ready for new +commands. A scmd is said to be recovered if the scmd is forgotten by +lower layers and lower layers are ready to process or fail the scmd +again. + + To achieve these goals, EH performs recovery actions with increasing +severity. Some actions are performed by issueing SCSI commands and +others are performed by invoking one of the following fine-grained +hostt EH callbacks. Callbacks may be omitted and omitted ones are +considered to fail always. + +int (* eh_abort_handler)(struct scsi_cmnd *); +int (* eh_device_reset_handler)(struct scsi_cmnd *); +int (* eh_bus_reset_handler)(struct scsi_cmnd *); +int (* eh_host_reset_handler)(struct scsi_cmnd *); + + Higher-severity actions are taken only when lower-severity actions +cannot recover some of failed scmds. Also, note that failure of the +highest-severity action means EH failure and results in offlining of +all unrecovered devices. + + During recovery, the following rules are followed + + - Recovery actions are performed on failed scmds on the to do list, + eh_work_q. If a recovery action succeeds for a scmd, recovered + scmds are removed from eh_work_q. + + Note that single recovery action on a scmd can recover multiple + scmds. e.g. resetting a device recovers all failed scmds on the + device. + + - Higher severity actions are taken iff eh_work_q is not empty after + lower severity actions are complete. + + - EH reuses failed scmds to issue commands for recovery. For + timed-out scmds, SCSI EH ensures that LLDD forgets about a scmd + before reusing it for EH commands. + + When a scmd is recovered, the scmd is moved from eh_work_q to EH +local eh_done_q using scsi_eh_finish_cmd(). After all scmds are +recovered (eh_work_q is empty), scsi_eh_flush_done_q() is invoked to +either retry or error-finish (notify upper layer of failure) recovered +scmds. + + scmds are retried iff its sdev is still online (not offlined during +EH), REQ_FAILFAST is not set and ++scmd->retries is less than +scmd->allowed. + + +[2-1-2] Flow of scmds through EH + + 1. Error completion / time out + ACTION: scsi_eh_scmd_add() is invoked for scmd + - set scmd->eh_eflags + - add scmd to shost->eh_cmd_q + - set SHOST_RECOVERY + - shost->host_failed++ + LOCKING: shost->host_lock + + 2. EH starts + ACTION: move all scmds to EH's local eh_work_q. shost->eh_cmd_q + is cleared. + LOCKING: shost->host_lock (not strictly necessary, just for + consistency) + + 3. scmd recovered + ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd + - shost->host_failed-- + - clear scmd->eh_eflags + - scsi_setup_cmd_retry() + - move from local eh_work_q to local eh_done_q + LOCKING: none + + 4. EH completes + ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper + layer of failure. + - scmd is removed from eh_done_q and scmd->eh_entry is cleared + - if retry is necessary, scmd is requeued using + scsi_queue_insert() + - otherwise, scsi_finish_command() is invoked for scmd + LOCKING: queue or finish function performs appropriate locking + + +[2-1-3] Flow of control + + EH through fine-grained callbacks start from scsi_unjam_host(). + +<> + + 1. Lock shost->host_lock, splice_init shost->eh_cmd_q into local + eh_work_q and unlock host_lock. Note that shost->eh_cmd_q is + cleared by this action. + + 2. Invoke scsi_eh_get_sense. + + <> + + This action is taken for each error-completed + (!SCSI_EH_CANCEL_CMD) commands without valid sense data. Most + SCSI transports/LLDDs automatically acquire sense data on + command failures (autosense). Autosense is recommended for + performance reasons and as sense information could get out of + sync inbetween occurrence of CHECK CONDITION and this action. + + Note that if autosense is not supported, scmd->sense_buffer + contains invalid sense data when error-completing the scmd + with scsi_done(). scsi_decide_disposition() always returns + FAILED in such cases thus invoking SCSI EH. When the scmd + reaches here, sense data is acquired and + scsi_decide_disposition() is called again. + + 1. Invoke scsi_request_sense() which issues REQUEST_SENSE + command. If fails, no action. Note that taking no action + causes higher-severity recovery to be taken for the scmd. + + 2. Invoke scsi_decide_disposition() on the scmd + + - SUCCESS + scmd->retries is set to scmd->allowed preventing + scsi_eh_flush_done_q() from retrying the scmd and + scsi_eh_finish_cmd() is invoked. + + - NEEDS_RETRY + scsi_eh_finish_cmd() invoked + + - otherwise + No action. + + 3. If !list_empty(&eh_work_q), invoke scsi_eh_abort_cmds(). + + <> + + This action is taken for each timed out command. + hostt->eh_abort_handler() is invoked for each scmd. The + handler returns SUCCESS if it has succeeded to make LLDD and + all related hardware forget about the scmd. + + If a timedout scmd is successfully aborted and the sdev is + either offline or ready, scsi_eh_finish_cmd() is invoked for + the scmd. Otherwise, the scmd is left in eh_work_q for + higher-severity actions. + + Note that both offline and ready status mean that the sdev is + ready to process new scmds, where processing also implies + immediate failing; thus, if a sdev is in one of the two + states, no further recovery action is needed. + + Device readiness is tested using scsi_eh_tur() which issues + TEST_UNIT_READY command. Note that the scmd must have been + aborted successfully before reusing it for TEST_UNIT_READY. + + 4. If !list_empty(&eh_work_q), invoke scsi_eh_ready_devs() + + <> + + This function takes four increasingly more severe measures to + make failed sdevs ready for new commands. + + 1. Invoke scsi_eh_stu() + + <> + + For each sdev which has failed scmds with valid sense data + of which scsi_check_sense()'s verdict is FAILED, + START_STOP_UNIT command is issued w/ start=1. Note that + as we explicitly choose error-completed scmds, it is known + that lower layers have forgotten about the scmd and we can + reuse it for STU. + + If STU succeeds and the sdev is either offline or ready, + all failed scmds on the sdev are EH-finished with + scsi_eh_finish_cmd(). + + *NOTE* If hostt->eh_abort_handler() isn't implemented or + failed, we may still have timed out scmds at this point + and STU doesn't make lower layers forget about those + scmds. Yet, this function EH-finish all scmds on the sdev + if STU succeeds leaving lower layers in an inconsistent + state. It seems that STU action should be taken only when + a sdev has no timed out scmd. + + 2. If !list_empty(&eh_work_q), invoke scsi_eh_bus_device_reset(). + + <> + + This action is very similar to scsi_eh_stu() except that, + instead of issuing STU, hostt->eh_device_reset_handler() + is used. Also, as we're not issuing SCSI commands and + resetting clears all scmds on the sdev, there is no need + to choose error-completed scmds. + + 3. If !list_empty(&eh_work_q), invoke scsi_eh_bus_reset() + + <> + + hostt->eh_bus_reset_handler() is invoked for each channel + with failed scmds. If bus reset succeeds, all failed + scmds on all ready or offline sdevs on the channel are + EH-finished. + + 4. If !list_empty(&eh_work_q), invoke scsi_eh_host_reset() + + <> + + This is the last resort. hostt->eh_host_reset_handler() + is invoked. If host reset succeeds, all failed scmds on + all ready or offline sdevs on the host are EH-finished. + + 5. If !list_empty(&eh_work_q), invoke scsi_eh_offline_sdevs() + + <> + + Take all sdevs which still have unrecovered scmds offline + and EH-finish the scmds. + + 5. Invoke scsi_eh_flush_done_q(). + + <> + + At this point all scmds are recovered (or given up) and + put on eh_done_q by scsi_eh_finish_cmd(). This function + flushes eh_done_q by either retrying or notifying upper + layer of failure of the scmds. + + +[2-2] EH through hostt->eh_strategy_handler() + + hostt->eh_strategy_handler() is invoked in the place of +scsi_unjam_host() and it is responsible for whole recovery process. +On completion, the handler should have made lower layers forget about +all failed scmds and either ready for new commands or offline. Also, +it should perform SCSI EH maintenance choirs to maintain integrity of +SCSI midlayer. IOW, of the steps described in [2-1-2], all steps +except for #1 must be implemented by eh_strategy_handler(). + + +[2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions + + The following conditions are true on entry to the handler. + + - Each failed scmd's eh_flags field is set appropriately. + + - Each failed scmd is linked on scmd->eh_cmd_q by scmd->eh_entry. + + - SHOST_RECOVERY is set. + + - shost->host_failed == shost->host_busy + + +[2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions + + The following conditions must be true on exit from the handler. + + - shost->host_failed is zero. + + - Each scmd's eh_eflags field is cleared. + + - Each scmd is in such a state that scsi_setup_cmd_retry() on the + scmd doesn't make any difference. + + - shost->eh_cmd_q is cleared. + + - Each scmd->eh_entry is cleared. + + - Either scsi_queue_insert() or scsi_finish_command() is called on + each scmd. Note that the handler is free to use scmd->retries and + ->allowed to limit the number of retries. + + +[2-2-3] Things to consider + + - Know that timed out scmds are still active on lower layers. Make + lower layers forget about them before doing anything else with + those scmds. + + - For consistency, when accessing/modifying shost data structure, + grab shost->host_lock. + + - On completion, each failed sdev must have forgotten about all + active scmds. + + - On completion, each failed sdev must be ready for new commands or + offline. + + +-- +Tejun Heo +htejun@gmail.com +11th September 2005 diff --git a/trunk/Documentation/scsi/scsi_mid_low_api.txt b/trunk/Documentation/scsi/scsi_mid_low_api.txt index 7536823c0cb1..44df89c9c049 100644 --- a/trunk/Documentation/scsi/scsi_mid_low_api.txt +++ b/trunk/Documentation/scsi/scsi_mid_low_api.txt @@ -373,13 +373,11 @@ Summary: scsi_activate_tcq - turn on tag command queueing scsi_add_device - creates new scsi device (lu) instance scsi_add_host - perform sysfs registration and SCSI bus scan. - scsi_add_timer - (re-)start timer on a SCSI command. scsi_adjust_queue_depth - change the queue depth on a SCSI device scsi_assign_lock - replace default host_lock with given lock scsi_bios_ptable - return copy of block device's partition table scsi_block_requests - prevent further commands being queued to given host scsi_deactivate_tcq - turn off tag command queueing - scsi_delete_timer - cancel timer on a SCSI command. scsi_host_alloc - return a new scsi_host instance whose refcount==1 scsi_host_get - increments Scsi_Host instance's refcount scsi_host_put - decrements Scsi_Host instance's refcount (free if 0) @@ -457,27 +455,6 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost, int scsi_add_host(struct Scsi_Host *shost, struct device * dev) -/** - * scsi_add_timer - (re-)start timer on a SCSI command. - * @scmd: pointer to scsi command instance - * @timeout: duration of timeout in "jiffies" - * @complete: pointer to function to call if timeout expires - * - * Returns nothing - * - * Might block: no - * - * Notes: Each scsi command has its own timer, and as it is added - * to the queue, we set up the timer. When the command completes, - * we cancel the timer. An LLD can use this function to change - * the existing timeout value. - * - * Defined in: drivers/scsi/scsi_error.c - **/ -void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, - void (*complete)(struct scsi_cmnd *)) - - /** * scsi_adjust_queue_depth - allow LLD to change queue depth on a SCSI device * @sdev: pointer to SCSI device to change queue depth on @@ -565,24 +542,6 @@ void scsi_block_requests(struct Scsi_Host * shost) void scsi_deactivate_tcq(struct scsi_device *sdev, int depth) -/** - * scsi_delete_timer - cancel timer on a SCSI command. - * @scmd: pointer to scsi command instance - * - * Returns 1 if able to cancel timer else 0 (i.e. too late or already - * cancelled). - * - * Might block: no [may in the future if it invokes del_timer_sync()] - * - * Notes: All commands issued by upper levels already have a timeout - * associated with them. An LLD can use this function to cancel the - * timer. - * - * Defined in: drivers/scsi/scsi_error.c - **/ -int scsi_delete_timer(struct scsi_cmnd *scmd) - - /** * scsi_host_alloc - create a scsi host adapter instance and perform basic * initialization. diff --git a/trunk/Documentation/sonypi.txt b/trunk/Documentation/sonypi.txt index 0f3b2405d09e..c1237a925505 100644 --- a/trunk/Documentation/sonypi.txt +++ b/trunk/Documentation/sonypi.txt @@ -99,6 +99,7 @@ statically linked into the kernel). Those options are: SONYPI_MEYE_MASK 0x0400 SONYPI_MEMORYSTICK_MASK 0x0800 SONYPI_BATTERY_MASK 0x1000 + SONYPI_WIRELESS_MASK 0x2000 useinput: if set (which is the default) two input devices are created, one which interprets the jogdial events as @@ -137,6 +138,15 @@ Bugs: speed handling etc). Use ACPI instead of APM if it works on your laptop. + - sonypi lacks the ability to distinguish between certain key + events on some models. + + - some models with the nvidia card (geforce go 6200 tc) uses a + different way to adjust the backlighting of the screen. There + is a userspace utility to adjust the brightness on those models, + which can be downloaded from + http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2 + - since all development was done by reverse engineering, there is _absolutely no guarantee_ that this driver will not crash your laptop. Permanently. diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt index 5c49ba07e709..13cba955cb5a 100644 --- a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt @@ -75,7 +75,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. adsp_map - PCM device number maps assigned to the 2st OSS device. - Default: 1 nonblock_open - - Don't block opening busy PCM devices. + - Don't block opening busy PCM devices. Default: 1 For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of the card #0. Similarly, when adsp_map=0, /dev/adsp will be mapped @@ -148,6 +148,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports up to 8 cards. This module does not support autoprobe thus main port must be specified!!! Other ports are optional. + Module snd-ad1889 + ----------------- + + Module for Analog Devices AD1889 chips. + + ac97_quirk - AC'97 workaround for strange hardware + See the description of intel8x0 module for details. + + This module supports up to 8 cards. + Module snd-ali5451 ------------------ @@ -189,15 +199,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-atiixp ----------------- - Module for ATI IXP 150/200/250 AC97 controllers. + Module for ATI IXP 150/200/250/400 AC97 controllers. - ac97_clock - AC'97 clock (defalut = 48000) + ac97_clock - AC'97 clock (default = 48000) ac97_quirk - AC'97 workaround for strange hardware - See the description of intel8x0 module for details. + See "AC97 Quirk Option" section below. spdif_aclink - S/PDIF transfer over AC-link (default = 1) This module supports up to 8 cards and autoprobe. + ATI IXP has two different methods to control SPDIF output. One is + over AC-link and another is over the "direct" SPDIF output. The + implementation depends on the motherboard, and you'll need to + choose the correct one via spdif_aclink module option. + Module snd-atiixp-modem ----------------------- @@ -230,7 +245,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The hardware EQ hardware and SPDIF is only present in the Vortex2 and Advantage. - Note: Some ALSA mixer applicactions don't handle the SPDIF samplerate + Note: Some ALSA mixer applications don't handle the SPDIF sample rate control correctly. If you have problems regarding this, try another ALSA compliant mixer (alsamixer works). @@ -302,7 +317,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mpu_port - 0x300,0x310,0x320,0x330, 0 = disable (default) fm_port - 0x388 (default), 0 = disable (default) - soft_ac3 - Sofware-conversion of raw SPDIF packets (model 033 only) + soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only) (default = 1) joystick_port - Joystick port address (0 = disable, 1 = auto-detect) @@ -384,7 +399,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/ CS4624/CS4630/CS4280 PCI chips. - external_amp - Force to enable external amplifer. + external_amp - Force to enable external amplifier. thinkpad - Force to enable Thinkpad's CLKRUN control. mmap_valid - Support OSS mmap mode (default = 0). @@ -620,7 +635,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. VIA VT8251/VT8237A model - force the model name - position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF) + position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) Module supports up to 8 cards. @@ -656,6 +671,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. allout 5-jack in back, 2-jack in front, SPDIF out auto auto-config reading BIOS (default) + If the default configuration doesn't work and one of the above + matches with your device, report it together with the PCI + subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel + ML (see the section "Links and Addresses"). + Note 2: If you get click noises on output, try the module option position_fix=1 or 2. position_fix=1 will use the SD_LPIB register value without FIFO size correction as the current @@ -783,20 +803,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ac97_clock - AC'97 codec clock base (0 = auto-detect) ac97_quirk - AC'97 workaround for strange hardware - The following strings are accepted: - default = don't override the default setting - disable = disable the quirk - hp_only = use headphone control as master - swap_hp = swap headphone and master controls - swap_surround = swap master and surround controls - ad_sharing = for AD1985, turn on OMS bit and use headphone - alc_jack = for ALC65x, turn on the jack sense mode - inv_eapd = inverted EAPD implementation - mute_led = bind EAPD bit for turning on/off mute LED - For backward compatibility, the corresponding integer - value -1, 0, ... are accepted, too. + See "AC97 Quirk Option" section below. buggy_irq - Enable workaround for buggy interrupts on some - motherboards (default off) + motherboards (default yes on nForce chips, + otherwise off) + buggy_semaphore - Enable workaround for hardwares with buggy + semaphores (e.g. on some ASUS laptops) + (default off) Module supports autoprobe and multiple bus-master chips (max 8). @@ -808,13 +821,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. motherboard has these devices, use the ns558 or snd-mpu401 modules, respectively. - The ac97_quirk option is used to enable/override the workaround - for specific devices. Some hardware have swapped output pins - between Master and Headphone, or Surround. The driver provides - the auto-detection of known problematic devices, but some might - be unknown or wrongly detected. In such a case, pass the proper - value with this option. - The power-management is supported. Module snd-intel8x0m @@ -966,7 +972,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. with machines with other (most likely CS423x or OPL3SAx) chips, even though the device is detected in lspci. In such a case, try other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP - but some doesn't have ISA PnP. You'll need to speicfy isapnp=0 + but some doesn't have ISA PnP. You'll need to specify isapnp=0 and proper hardware parameters in the case without ISA PnP. Note: some laptops need a workaround for AC97 RESET. For the @@ -1302,7 +1308,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. channels [VIA8233/C, 8235, 8237 only] ac97_quirk - AC'97 workaround for strange hardware - See the description of intel8x0 module for details. + See "AC97 Quirk Option" section below. Module supports autoprobe and multiple bus-master chips (max 8). @@ -1327,16 +1333,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "lspci -nv"). If dxs_support=5 does not work, try dxs_support=4; if it doesn't work too, try dxs_support=1. (dxs_support=1 is - usually for old motherboards. The correct implementated + usually for old motherboards. The correct implemented board should work with 4 or 5.) If it still doesn't work and the default setting is ok, dxs_support=3 is the right choice. If the default setting doesn't work at all, try dxs_support=2 to disable the DXS channels. In any cases, please let us know the result and the - subsystem vendor/device ids. + subsystem vendor/device ids. See "Links and Addresses" + below. Note: for the MPU401 on VIA823x, use snd-mpu401 driver - additonally. The mpu_port option is for VIA686 chips only. + additionally. The mpu_port option is for VIA686 chips only. Module snd-via82xx-modem ------------------------ @@ -1398,8 +1405,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports up to 8 cards. The module is compiled only when PCMCIA is supported on kernel. - To activate the driver via the card manager, you'll need to set - up /etc/pcmcia/vxpocket.conf. See the sound/pcmcia/vx/vxpocket.c. + With the older 2.6.x kernel, to activate the driver via the card + manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the + sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no + longer require a config file. When the driver is compiled as a module and the hotplug firmware is supported, the firmware data is loaded via hotplug automatically. @@ -1411,6 +1420,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Note: the driver is build only when CONFIG_ISA is set. + Note2: snd-vxp440 driver is merged to snd-vxpocket driver since + ALSA 1.0.10. + Module snd-ymfpci ----------------- @@ -1436,6 +1448,37 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Note: the driver is build only when CONFIG_ISA is set. +AC97 Quirk Option +================= + +The ac97_quirk option is used to enable/override the workaround for +specific devices on drivers for on-board AC'97 controllers like +snd-intel8x0. Some hardware have swapped output pins between Master +and Headphone, or Surround (thanks to confusion of AC'97 +specifications from version to version :-) + +The driver provides the auto-detection of known problematic devices, +but some might be unknown or wrongly detected. In such a case, pass +the proper value with this option. + +The following strings are accepted: + - default Don't override the default setting + - disable Disable the quirk + - hp_only Bind Master and Headphone controls as a single control + - swap_hp Swap headphone and master controls + - swap_surround Swap master and surround controls + - ad_sharing For AD1985, turn on OMS bit and use headphone + - alc_jack For ALC65x, turn on the jack sense mode + - inv_eapd Inverted EAPD implementation + - mute_led Bind EAPD bit for turning on/off mute LED + +For backward compatibility, the corresponding integer value -1, 0, +... are accepted, too. + +For example, if "Master" volume control has no effect on your device +but only "Headphone" does, pass ac97_quirk=hp_only module option. + + Configuring Non-ISAPNP Cards ============================ @@ -1459,7 +1502,7 @@ devices where %i is sound card number from zero to seven. To auto-load an ALSA driver for OSS services, define the string 'sound-slot-%i' where %i means the slot number for OSS, which corresponds to the card index of ALSA. Usually, define this -as the the same card module. +as the same card module. An example configuration for a single emu10k1 card is like below: ----- /etc/modprobe.conf @@ -1553,6 +1596,8 @@ Proc interfaces (/proc/asound) - whole-frag write only whole fragments (optimization affecting playback only) - no-silence do not fill silence ahead to avoid clicks + - buggy-ptr Returns the whitespace blocks in GETOPTR ioctl + instead of filled blocks Example: echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss @@ -1589,9 +1634,14 @@ commands to the snd-page-alloc driver: use. -Links -===== +Links and Addresses +=================== ALSA project homepage http://www.alsa-project.org + ALSA Bug Tracking System + https://bugtrack.alsa-project.org/bugs/ + + ALSA Developers ML + mailto:alsa-devel@lists.sourceforge.net diff --git a/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 0475478c2484..24e85520890b 100644 --- a/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -447,7 +447,7 @@ .... /* allocate a chip-specific data with zero filled */ - chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (chip == NULL) return -ENOMEM; @@ -949,7 +949,7 @@ After allocating a card instance via snd_card_new() (with NULL on the 4th arg), call - kcalloc(). + kzalloc(). @@ -958,7 +958,7 @@ mychip_t *chip; card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL); ..... - chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); ]]> @@ -1136,7 +1136,7 @@ return -ENXIO; } - chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (chip == NULL) { pci_disable_device(pci); return -ENOMEM; @@ -1292,7 +1292,7 @@ need to initialize this number as -1 before actual allocation, since irq 0 is valid. The port address and its resource pointer can be initialized as null by - kcalloc() automatically, so you + kzalloc() automatically, so you don't have to take care of resetting them. diff --git a/trunk/Documentation/sparse.txt b/trunk/Documentation/sparse.txt index f97841478459..1829009db771 100644 --- a/trunk/Documentation/sparse.txt +++ b/trunk/Documentation/sparse.txt @@ -51,13 +51,13 @@ or you don't get any checking at all. Where to get sparse ~~~~~~~~~~~~~~~~~~~ -With BK, you can just get it from +With git, you can just get it from - bk://sparse.bkbits.net/sparse + rsync://rsync.kernel.org/pub/scm/devel/sparse/sparse.git and DaveJ has tar-balls at - http://www.codemonkey.org.uk/projects/bitkeeper/sparse/ + http://www.codemonkey.org.uk/projects/git-snapshots/sparse/ Once you have it, just do diff --git a/trunk/Documentation/sysrq.txt b/trunk/Documentation/sysrq.txt index 136d817c01ba..baf17b381588 100644 --- a/trunk/Documentation/sysrq.txt +++ b/trunk/Documentation/sysrq.txt @@ -171,7 +171,7 @@ the header 'include/linux/sysrq.h', this will define everything else you need. Next, you must create a sysrq_key_op struct, and populate it with A) the key handler function you will use, B) a help_msg string, that will print when SysRQ prints help, and C) an action_msg string, that will print right before your -handler is called. Your handler must conform to the protoype in 'sysrq.h'. +handler is called. Your handler must conform to the prototype in 'sysrq.h'. After the sysrq_key_op is created, you can call the macro register_sysrq_key(int key, struct sysrq_key_op *op_p) that is defined in diff --git a/trunk/Documentation/uml/UserModeLinux-HOWTO.txt b/trunk/Documentation/uml/UserModeLinux-HOWTO.txt index 0c7b654fec99..544430e39980 100644 --- a/trunk/Documentation/uml/UserModeLinux-HOWTO.txt +++ b/trunk/Documentation/uml/UserModeLinux-HOWTO.txt @@ -2176,7 +2176,7 @@ If you want to access files on the host machine from inside UML, you can treat it as a separate machine and either nfs mount directories from the host or copy files into the virtual machine with scp or rcp. - However, since UML is running on the the host, it can access those + However, since UML is running on the host, it can access those files just like any other process and make them available inside the virtual machine without needing to use the network. diff --git a/trunk/Documentation/usb/URB.txt b/trunk/Documentation/usb/URB.txt index d59b95cc6f1b..a49e5f2c2b46 100644 --- a/trunk/Documentation/usb/URB.txt +++ b/trunk/Documentation/usb/URB.txt @@ -1,5 +1,6 @@ Revised: 2000-Dec-05. Again: 2002-Jul-06 +Again: 2005-Sep-19 NOTE: @@ -18,8 +19,8 @@ called USB Request Block, or URB for short. and deliver the data and status back. - Execution of an URB is inherently an asynchronous operation, i.e. the - usb_submit_urb(urb) call returns immediately after it has successfully queued - the requested action. + usb_submit_urb(urb) call returns immediately after it has successfully + queued the requested action. - Transfers for one URB can be canceled with usb_unlink_urb(urb) at any time. @@ -94,8 +95,9 @@ To free an URB, use void usb_free_urb(struct urb *urb) -You may not free an urb that you've submitted, but which hasn't yet been -returned to you in a completion callback. +You may free an urb that you've submitted, but which hasn't yet been +returned to you in a completion callback. It will automatically be +deallocated when it is no longer in use. 1.4. What has to be filled in? @@ -145,30 +147,36 @@ to get seamless ISO streaming. 1.6. How to cancel an already running URB? -For an URB which you've submitted, but which hasn't been returned to -your driver by the host controller, call +There are two ways to cancel an URB you've submitted but which hasn't +been returned to your driver yet. For an asynchronous cancel, call int usb_unlink_urb(struct urb *urb) It removes the urb from the internal list and frees all allocated -HW descriptors. The status is changed to reflect unlinking. After -usb_unlink_urb() returns with that status code, you can free the URB -with usb_free_urb(). +HW descriptors. The status is changed to reflect unlinking. Note +that the URB will not normally have finished when usb_unlink_urb() +returns; you must still wait for the completion handler to be called. -There is also an asynchronous unlink mode. To use this, set the -the URB_ASYNC_UNLINK flag in urb->transfer flags before calling -usb_unlink_urb(). When using async unlinking, the URB will not -normally be unlinked when usb_unlink_urb() returns. Instead, wait -for the completion handler to be called. +To cancel an URB synchronously, call + + void usb_kill_urb(struct urb *urb) + +It does everything usb_unlink_urb does, and in addition it waits +until after the URB has been returned and the completion handler +has finished. It also marks the URB as temporarily unusable, so +that if the completion handler or anyone else tries to resubmit it +they will get a -EPERM error. Thus you can be sure that when +usb_kill_urb() returns, the URB is totally idle. 1.7. What about the completion handler? The handler is of the following type: - typedef void (*usb_complete_t)(struct urb *); + typedef void (*usb_complete_t)(struct urb *, struct pt_regs *) -i.e. it gets just the URB that caused the completion call. +I.e., it gets the URB that caused the completion call, plus the +register values at the time of the corresponding interrupt (if any). In the completion handler, you should have a look at urb->status to detect any USB errors. Since the context parameter is included in the URB, you can pass information to the completion handler. @@ -176,17 +184,11 @@ you can pass information to the completion handler. Note that even when an error (or unlink) is reported, data may have been transferred. That's because USB transfers are packetized; it might take sixteen packets to transfer your 1KByte buffer, and ten of them might -have transferred succesfully before the completion is called. +have transferred succesfully before the completion was called. NOTE: ***** WARNING ***** -Don't use urb->dev field in your completion handler; it's cleared -as part of giving urbs back to drivers. (Addressing an issue with -ownership of periodic URBs, which was otherwise ambiguous.) Instead, -use urb->context to hold all the data your driver needs. - -NOTE: ***** WARNING ***** -Also, NEVER SLEEP IN A COMPLETION HANDLER. These are normally called +NEVER SLEEP IN A COMPLETION HANDLER. These are normally called during hardware interrupt processing. If you can, defer substantial work to a tasklet (bottom half) to keep system latencies low. You'll probably need to use spinlocks to protect data structures you manipulate @@ -229,24 +231,10 @@ ISO data with some other event stream. Interrupt transfers, like isochronous transfers, are periodic, and happen in intervals that are powers of two (1, 2, 4 etc) units. Units are frames for full and low speed devices, and microframes for high speed ones. - -Currently, after you submit one interrupt URB, that urb is owned by the -host controller driver until you cancel it with usb_unlink_urb(). You -may unlink interrupt urbs in their completion handlers, if you need to. - -After a transfer completion is called, the URB is automagically resubmitted. -THIS BEHAVIOR IS EXPECTED TO BE REMOVED!! - -Interrupt transfers may only send (or receive) the "maxpacket" value for -the given interrupt endpoint; if you need more data, you will need to -copy that data out of (or into) another buffer. Similarly, you can't -queue interrupt transfers. -THESE RESTRICTIONS ARE EXPECTED TO BE REMOVED!! - -Note that this automagic resubmission model does make it awkward to use -interrupt OUT transfers. The portable solution involves unlinking those -OUT urbs after the data is transferred, and perhaps submitting a final -URB for a short packet. - The usb_submit_urb() call modifies urb->interval to the implemented interval value that is less than or equal to the requested interval value. + +In Linux 2.6, unlike earlier versions, interrupt URBs are not automagically +restarted when they complete. They end when the completion handler is +called, just like other URBs. If you want an interrupt URB to be restarted, +your completion handler must resubmit it. diff --git a/trunk/Documentation/usb/gadget_serial.txt b/trunk/Documentation/usb/gadget_serial.txt index a938c3dd13d6..815f5c2301ff 100644 --- a/trunk/Documentation/usb/gadget_serial.txt +++ b/trunk/Documentation/usb/gadget_serial.txt @@ -20,7 +20,7 @@ License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. -This document and the the gadget serial driver itself are +This document and the gadget serial driver itself are Copyright (C) 2004 by Al Borchers (alborchers@steinerpoint.com). If you have questions, problems, or suggestions for this driver diff --git a/trunk/Documentation/usb/proc_usb_info.txt b/trunk/Documentation/usb/proc_usb_info.txt index 729c72d34c89..f86550fe38ee 100644 --- a/trunk/Documentation/usb/proc_usb_info.txt +++ b/trunk/Documentation/usb/proc_usb_info.txt @@ -20,7 +20,7 @@ the /proc/bus/usb/BBB/DDD files. to /etc/fstab. This will mount usbfs at each reboot. You can then issue `cat /proc/bus/usb/devices` to extract - USB device information, and user mode drivers can use usbfs + USB device information, and user mode drivers can use usbfs to interact with USB devices. There are a number of mount options supported by usbfs. @@ -32,7 +32,7 @@ the /proc/bus/usb/BBB/DDD files. still see references to the older "usbdevfs" name. For more information on mounting the usbfs file system, see the -"USB Device Filesystem" section of the USB Guide. The latest copy +"USB Device Filesystem" section of the USB Guide. The latest copy of the USB Guide can be found at http://www.linux-usb.org/ @@ -133,7 +133,7 @@ B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd are the only transfers that reserve bandwidth. Control and bulk transfers use all other bandwidth, including reserved bandwidth that is not used for transfers (such as for short packets). - + The percentage is how much of the "reserved" bandwidth is scheduled by those transfers. For a low or full speed bus (loosely, "USB 1.1"), 90% of the bus bandwidth is reserved. For a high speed bus (loosely, @@ -197,7 +197,7 @@ C:* #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA | | |__NumberOfInterfaces | |__ "*" indicates the active configuration (others are " ") |__Config info tag - + USB devices may have multiple configurations, each of which act rather differently. For example, a bus-powered configuration might be much less capable than one that is self-powered. Only @@ -228,7 +228,7 @@ I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss For example, default settings may not use more than a small amount of periodic bandwidth. To use significant fractions of bus bandwidth, drivers must select a non-default altsetting. - + Only one setting for an interface may be active at a time, and only one driver may bind to an interface at a time. Most devices have only one alternate setting per interface. @@ -297,18 +297,21 @@ S: SerialNumber=dce0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms + T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0451 ProdID=1446 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms + T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b4 ProdID=0001 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms + T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0565 ProdID=0001 Rev= 1.08 diff --git a/trunk/Documentation/video4linux/CARDLIST.bttv b/trunk/Documentation/video4linux/CARDLIST.bttv index 62a12a08e2ac..ec785f9f15a3 100644 --- a/trunk/Documentation/video4linux/CARDLIST.bttv +++ b/trunk/Documentation/video4linux/CARDLIST.bttv @@ -126,10 +126,12 @@ card=124 - AverMedia AverTV DVB-T 761 card=125 - MATRIX Vision Sigma-SQ card=126 - MATRIX Vision Sigma-SLC card=127 - APAC Viewcomp 878(AMAX) -card=128 - DVICO FusionHDTV DVB-T Lite +card=128 - DViCO FusionHDTV DVB-T Lite card=129 - V-Gear MyVCD card=130 - Super TV Tuner card=131 - Tibet Systems 'Progress DVR' CS16 card=132 - Kodicom 4400R (master) card=133 - Kodicom 4400R (slave) card=134 - Adlink RTV24 +card=135 - DViCO FusionHDTV 5 Lite +card=136 - Acorp Y878F diff --git a/trunk/Documentation/video4linux/CARDLIST.saa7134 b/trunk/Documentation/video4linux/CARDLIST.saa7134 index 1b5a3a9ffbe2..dc57225f39be 100644 --- a/trunk/Documentation/video4linux/CARDLIST.saa7134 +++ b/trunk/Documentation/video4linux/CARDLIST.saa7134 @@ -62,3 +62,6 @@ 61 -> Philips TOUGH DVB-T reference design [1131:2004] 62 -> Compro VideoMate TV Gold+II 63 -> Kworld Xpert TV PVR7134 + 64 -> FlyTV mini Asus Digimatrix [1043:0210,1043:0210] + 65 -> V-Stream Studio TV Terminator + 66 -> Yuan TUN-900 (saa7135) diff --git a/trunk/Documentation/video4linux/CARDLIST.tuner b/trunk/Documentation/video4linux/CARDLIST.tuner index f3302e1b1b9c..f5876be658a6 100644 --- a/trunk/Documentation/video4linux/CARDLIST.tuner +++ b/trunk/Documentation/video4linux/CARDLIST.tuner @@ -64,3 +64,4 @@ tuner=62 - Philips TEA5767HN FM Radio tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner tuner=64 - LG TDVS-H062F/TUA6034 tuner=65 - Ymec TVF66T5-B/DFF +tuner=66 - LG NTSC (TALN mini series) diff --git a/trunk/Documentation/video4linux/Zoran b/trunk/Documentation/video4linux/Zoran index 01425c21986b..52c94bd7dca1 100644 --- a/trunk/Documentation/video4linux/Zoran +++ b/trunk/Documentation/video4linux/Zoran @@ -222,7 +222,7 @@ was introduced in 1991, is used in the DC10 old can generate: PAL , NTSC , SECAM The adv717x, should be able to produce PAL N. But you find nothing PAL N -specific in the the registers. Seem that you have to reuse a other standard +specific in the registers. Seem that you have to reuse a other standard to generate PAL N, maybe it would work if you use the PAL M settings. ========================== diff --git a/trunk/Documentation/x86_64/boot-options.txt b/trunk/Documentation/x86_64/boot-options.txt index 678e8f192db2..ffe1c062088b 100644 --- a/trunk/Documentation/x86_64/boot-options.txt +++ b/trunk/Documentation/x86_64/boot-options.txt @@ -11,6 +11,11 @@ Machine check If your BIOS doesn't do that it's a good idea to enable though to make sure you log even machine check events that result in a reboot. + mce=tolerancelevel (number) + 0: always panic, 1: panic if deadlock possible, + 2: try to avoid panic, 3: never panic or exit (for testing) + default is 1 + Can be also set using sysfs which is preferable. nomce (for compatibility with i386): same as mce=off diff --git a/trunk/Kbuild b/trunk/Kbuild new file mode 100644 index 000000000000..79003918f37f --- /dev/null +++ b/trunk/Kbuild @@ -0,0 +1,49 @@ +# +# Kbuild for top-level directory of the kernel +# This file takes care of the following: +# 1) Generate asm-offsets.h + +##### +# 1) Generate asm-offsets.h +# + +offsets-file := include/asm-$(ARCH)/asm-offsets.h + +always := $(offsets-file) +targets := $(offsets-file) +targets += arch/$(ARCH)/kernel/asm-offsets.s + +# Default sed regexp - multiline due to syntax constraints +define sed-y + "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" +endef +# Override default regexp for specific architectures +sed-$(CONFIG_MIPS) := "/^@@@/s///p" + +quiet_cmd_offsets = GEN $@ +define cmd_offsets + mkdir -p $(dir $@); \ + cat $< | \ + (set -e; \ + echo "#ifndef __ASM_OFFSETS_H__"; \ + echo "#define __ASM_OFFSETS_H__"; \ + echo "/*"; \ + echo " * DO NOT MODIFY."; \ + echo " *"; \ + echo " * This file was generated by $(srctree)/Kbuild"; \ + echo " *"; \ + echo " */"; \ + echo ""; \ + sed -ne $(sed-y); \ + echo ""; \ + echo "#endif" ) > $@ +endef + +# We use internal kbuild rules to avoid the "is up to date" message from make +arch/$(ARCH)/kernel/asm-offsets.s: arch/$(ARCH)/kernel/asm-offsets.c FORCE + $(Q)mkdir -p $(dir $@) + $(call if_changed_dep,cc_s_c) + +$(obj)/$(offsets-file): arch/$(ARCH)/kernel/asm-offsets.s Kbuild + $(call cmd,offsets) + diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 7e1f67130a16..767fb610963e 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -116,6 +116,12 @@ M: ajk@iehk.rwth-aachen.de L: linux-hams@vger.kernel.org S: Maintained +YEALINK PHONE DRIVER +P: Henk Vergonet +M: Henk.Vergonet@gmail.com +L: usbb2k-api-dev@nongnu.org +S: Maintained + 8139CP 10/100 FAST ETHERNET DRIVER P: Jeff Garzik M: jgarzik@pobox.com @@ -202,13 +208,6 @@ P: Colin Leroy M: colin@colino.net S: Maintained -ADVANSYS SCSI DRIVER -P: Bob Frey -M: linux@advansys.com -W: http://www.advansys.com/linux.html -L: linux-scsi@vger.kernel.org -S: Maintained - AEDSP16 DRIVER P: Riccardo Facchetti M: fizban@tin.it @@ -371,7 +370,10 @@ W: http://atmelwlandriver.sourceforge.net/ S: Maintained AUDIT SUBSYSTEM -L: linux-audit@redhat.com (subscribers-only) +P: David Woodhouse +M: dwmw2@infradead.org +L: linux-audit@redhat.com +W: http://people.redhat.com/sgrubb/audit/ S: Maintained AX.25 NETWORK LAYER @@ -602,6 +604,15 @@ P: H. Peter Anvin M: hpa@zytor.com S: Maintained +CPUSETS +P: Paul Jackson +P: Simon Derr +M: pj@sgi.com +M: simon.derr@bull.net +L: linux-kernel@vger.kernel.org +W: http://www.bullopensource.org/cpuset/ +S: Supported + CRAMFS FILESYSTEM W: http://sourceforge.net/projects/cramfs/ S: Orphan @@ -627,6 +638,12 @@ M: rmk@arm.linux.org.uk W: http://www.arm.linux.org.uk/ S: Maintained +CYBLAFB FRAMEBUFFER DRIVER +P: Knut Petersen +M: Knut_Petersen@t-online.de +L: linux-fbdev-devel@lists.sourceforge.net +S: Maintained + CYCLADES 2X SYNC CARD DRIVER P: Arnaldo Carvalho de Melo M: acme@conectiva.com.br @@ -678,6 +695,13 @@ P: Guennadi Liakhovetski M: g.liakhovetski@gmx.de S: Maintained +DCCP PROTOCOL +P: Arnaldo Carvalho de Melo +M: acme@mandriva.com +L: dccp@vger.kernel.org +W: http://www.wlug.org.nz/DCCP +S: Maintained + DECnet NETWORK LAYER P: Patrick Caulfield M: patrick@tykepenguin.com @@ -696,6 +720,11 @@ M: dz@debian.org W: http://www.debian.org/~dz/i8k/ S: Maintained +DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas) +P: Doug Warzecha +M: Douglas_Warzecha@dell.com +S: Maintained + DEVICE-MAPPER P: Alasdair Kergon L: dm-devel@redhat.com @@ -824,6 +853,13 @@ L: emu10k1-devel@lists.sourceforge.net W: http://sourceforge.net/projects/emu10k1/ S: Maintained +EMULEX LPFC FC SCSI DRIVER +P: James Smart +M: james.smart@emulex.com +L: linux-scsi@vger.kernel.org +W: http://sourceforge.net/projects/lpfcxxxx +S: Supported + EPSON 1355 FRAMEBUFFER DRIVER P: Christopher Hoover M: ch@murgatroid.com, ch@hpl.hp.com @@ -879,7 +915,7 @@ S: Maintained FILESYSTEMS (VFS and infrastructure) P: Alexander Viro -M: viro@parcelfarce.linux.theplanet.co.uk +M: viro@zeniv.linux.org.uk S: Maintained FIRMWARE LOADER (request_firmware) @@ -914,6 +950,13 @@ L: linux-tape@vger.kernel.org W: http://sourceforge.net/projects/ftape S: Orphan +FUSE: FILESYSTEM IN USERSPACE +P: Miklos Szeredi +M: miklos@szeredi.hu +L: fuse-devel@lists.sourceforge.net +W: http://fuse.sourceforge.net/ +S: Maintained + FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit) P: Rik Faith M: faith@cs.unc.edu @@ -940,6 +983,13 @@ L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.nu/ S: Maintained +HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER +P: Robert Love +M: rlove@rlove.org +M: linux-kernel@vger.kernel.org +W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/ +S: Maintained + HARMONY SOUND DRIVER P: Kyle McMartin M: kyle@parisc-linux.org @@ -1022,8 +1072,6 @@ M: wli@holomorphy.com S: Maintained I2C SUBSYSTEM -P: Greg Kroah-Hartman -M: greg@kroah.com P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org @@ -1120,11 +1168,6 @@ L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ S: Orphan -IEEE 1394 SBP2 -L: linux1394-devel@lists.sourceforge.net -W: http://www.linux1394.org/ -S: Orphan - IEEE 1394 SUBSYSTEM P: Ben Collins M: bcollins@debian.org @@ -1159,6 +1202,15 @@ L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ S: Maintained +IEEE 1394 SBP2 +P: Ben Collins +M: bcollins@debian.org +P: Stefan Richter +M: stefanr@s5r6.in-berlin.de +L: linux1394-devel@lists.sourceforge.net +W: http://www.linux1394.org/ +S: Maintained + IMS TWINTURBO FRAMEBUFFER DRIVER P: Paul Mundt M: lethal@chaoticdreams.org @@ -1363,6 +1415,18 @@ L: linux-kernel@vger.kernel.org L: fastboot@osdl.org S: Maintained +KPROBES +P: Prasanna S Panchamukhi +M: prasanna@in.ibm.com +P: Ananth N Mavinakayanahalli +M: ananth@in.ibm.com +P: Anil S Keshavamurthy +M: anil.s.keshavamurthy@intel.com +P: David S. Miller +M: davem@davemloft.net +L: linux-kernel@vger.kernel.org +S: Maintained + LANMEDIA WAN CARD DRIVER P: Andrew Stanley-Jones M: asj@lanmedia.com @@ -1554,6 +1618,13 @@ M: vandrove@vc.cvut.cz L: linux-fbdev-devel@lists.sourceforge.net S: Maintained +MEGARAID SCSI DRIVERS +P: Neela Syam Kolli +M: Neela.Kolli@engenio.com +S: linux-scsi@vger.kernel.org +W: http://megaraid.lsilogic.com +S: Maintained + MEMORY TECHNOLOGY DEVICES P: David Woodhouse M: dwmw2@infradead.org @@ -1683,8 +1754,11 @@ S: Maintained IPVS P: Wensong Zhang M: wensong@linux-vs.org +P: Simon Horman +M: horms@verge.net.au P: Julian Anastasov M: ja@ssi.bg +L: netdev@vger.kernel.org S: Maintained NFS CLIENT @@ -1808,13 +1882,6 @@ M: hch@infradead.org L: linux-abi-devel@lists.sourceforge.net S: Maintained -PCI ID DATABASE -P: Martin Mares -M: mj@ucw.cz -L: pciids-devel@lists.sourceforge.net -W: http://pciids.sourceforge.net/ -S: Maintained - PCI SOUND DRIVERS (ES1370, ES1371 and SONICVIBES) P: Thomas Sailer M: sailer@ife.ee.ethz.ch @@ -1862,6 +1929,13 @@ M: joern@wh.fh-wedel.de L: linux-mtd@lists.infradead.org S: Maintained +PKTCDVD DRIVER +P: Peter Osterlund +M: petero2@telia.com +L: linux-kernel@vger.kernel.org +L: packet-writing@suse.com +S: Maintained + POSIX CLOCKS and TIMERS P: George Anzinger M: george@mvista.com @@ -1967,7 +2041,6 @@ S: Supported ROCKETPORT DRIVER P: Comtrol Corp. -M: support@comtrol.com W: http://www.comtrol.com S: Maintained @@ -2233,6 +2306,12 @@ M: kristen.c.accardi@intel.com L: pcihpd-discuss@lists.sourceforge.net S: Maintained +SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS +P: Stephen Hemminger +M: shemminger@osdl.org +L: netdev@vger.kernel.org +S: Maintained + SPARC (sparc32): P: William L. Irwin M: wli@holomorphy.com @@ -2245,12 +2324,6 @@ M: R.E.Wolff@BitWizard.nl L: linux-kernel@vger.kernel.org ? S: Supported -SPX NETWORK LAYER -P: Jay Schulist -M: jschlst@samba.org -L: netdev@vger.kernel.org -S: Supported - SRM (Alpha) environment access P: Jan-Benedict Glaw M: jbglaw@lug-owl.de @@ -2681,6 +2754,17 @@ L: rio500-users@lists.sourceforge.net W: http://rio500.sourceforge.net S: Maintained +V9FS FILE SYSTEM +P: Eric Van Hensbergen +M: ericvh@gmail.com +P: Ron Minnich +M: rminnich@lanl.gov +P: Latchesar Ionkov +M: lucho@ionkov.net +L: v9fs-developer@lists.sourceforge.net +W: http://v9fs.sf.net +S: Maintained + VIDEO FOR LINUX P: Mauro Carvalho Chehab M: mchehab@brturbo.com.br diff --git a/trunk/Makefile b/trunk/Makefile index 63e5c9f0bc7a..4a7000e353b5 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 13 -EXTRAVERSION = +SUBLEVEL = 14 +EXTRAVERSION =-rc5 NAME=Affluent Albatross # *DOCUMENTATION* @@ -334,7 +334,7 @@ KALLSYMS = scripts/kallsyms PERL = perl CHECK = sparse -CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ +CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ $(CF) MODFLAGS = -DMODULE CFLAGS_MODULE = $(MODFLAGS) AFLAGS_MODULE = $(MODFLAGS) @@ -372,7 +372,7 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve # Files to ignore in find ... statements RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o -RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg +export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg # =========================================================================== # Rules shared between *config targets and build targets @@ -382,6 +382,9 @@ RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CV scripts_basic: $(Q)$(MAKE) $(build)=scripts/basic +# To avoid any implicit rule to kick in, define an empty command. +scripts/basic/%: scripts_basic ; + .PHONY: outputmakefile # outputmakefile generate a Makefile to be placed in output directory, if # using a seperate output directory. This allows convinient use @@ -444,9 +447,8 @@ ifeq ($(config-targets),1) include $(srctree)/arch/$(ARCH)/Makefile export KBUILD_DEFCONFIG -config: scripts_basic outputmakefile FORCE - $(Q)$(MAKE) $(build)=scripts/kconfig $@ -%config: scripts_basic outputmakefile FORCE +config %config: scripts_basic outputmakefile FORCE + $(Q)mkdir -p include/linux $(Q)$(MAKE) $(build)=scripts/kconfig $@ else @@ -489,6 +491,7 @@ include .config # If .config is newer than include/linux/autoconf.h, someone tinkered # with it and forgot to run make oldconfig include/linux/autoconf.h: .config + $(Q)mkdir -p include/linux $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else # Dummy target needed, because used as prerequisite @@ -641,8 +644,13 @@ quiet_cmd_vmlinux__ ?= LD $@ # Generate new vmlinux version quiet_cmd_vmlinux_version = GEN .version cmd_vmlinux_version = set -e; \ - . $(srctree)/scripts/mkversion > .tmp_version; \ - mv -f .tmp_version .version; \ + if [ ! -r .version ]; then \ + rm -f .version; \ + echo 1 >.version; \ + else \ + mv .version .old_version; \ + expr 0$$(cat .old_version) + 1 >.version; \ + fi; \ $(MAKE) $(build)=init # Generate System.map @@ -652,8 +660,10 @@ quiet_cmd_sysmap = SYSMAP # Link of vmlinux # If CONFIG_KALLSYMS is set .version is already updated # Generate System.map and verify that the content is consistent - +# Use + in front of the vmlinux_version rule to silent warning with make -j2 +# First command is ':' to allow us to use + in front of the rule define rule_vmlinux__ + : $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) $(call cmd,vmlinux__) @@ -756,6 +766,7 @@ endif # ifdef CONFIG_KALLSYMS # vmlinux image - including updated kernel symbols vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE $(call if_changed_rule,vmlinux__) + $(Q)rm -f .old_version # The actual objects are generated when descending, # make sure no implicit rule kicks in @@ -768,22 +779,27 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; # Error messages still appears in the original language .PHONY: $(vmlinux-dirs) -$(vmlinux-dirs): prepare-all scripts +$(vmlinux-dirs): prepare scripts $(Q)$(MAKE) $(build)=$@ # Things we need to do before we recursively start building the kernel -# or the modules are listed in "prepare-all". -# A multi level approach is used. prepare1 is updated first, then prepare0. -# prepare-all is the collection point for the prepare targets. +# or the modules are listed in "prepare". +# A multi level approach is used. prepareN is processed before prepareN-1. +# archprepare is used in arch Makefiles and when processed asm symlink, +# version.h and scripts_basic is processed / created. -.PHONY: prepare-all prepare prepare0 prepare1 prepare2 +# Listed in dependency order +.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3 -# prepare2 is used to check if we are building in a separate output directory, +# prepare-all is deprecated, use prepare as valid replacement +.PHONY: prepare-all + +# prepare3 is used to check if we are building in a separate output directory, # and if so do: # 1) Check that make has not been executed in the kernel src $(srctree) # 2) Create the include2 directory, used for the second asm symlink -prepare2: +prepare3: ifneq ($(KBUILD_SRC),) @echo ' Using $(srctree) as source for kernel' $(Q)if [ -f $(srctree)/.config ]; then \ @@ -795,18 +811,23 @@ ifneq ($(KBUILD_SRC),) $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm endif -# prepare1 creates a makefile if using a separate output directory -prepare1: prepare2 outputmakefile +# prepare2 creates a makefile if using a separate output directory +prepare2: prepare3 outputmakefile -prepare0: prepare1 include/linux/version.h include/asm \ +prepare1: prepare2 include/linux/version.h include/asm \ include/config/MARKER ifneq ($(KBUILD_MODULES),) $(Q)rm -rf $(MODVERDIR) $(Q)mkdir -p $(MODVERDIR) endif +archprepare: prepare1 scripts_basic + +prepare0: archprepare FORCE + $(Q)$(MAKE) $(build)=. + # All the preparing.. -prepare-all: prepare0 prepare +prepare prepare-all: prepare0 # Leave this as default for preprocessing vmlinux.lds.S, which is now # done in arch/$(ARCH)/kernel/Makefile @@ -845,7 +866,7 @@ include/asm: # Split autoconf.h into include/linux/config/* -include/config/MARKER: include/linux/autoconf.h +include/config/MARKER: scripts/basic/split-include include/linux/autoconf.h @echo ' SPLIT include/linux/autoconf.h -> include/config/*' @scripts/basic/split-include include/linux/autoconf.h include/config @touch $@ @@ -897,7 +918,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) # Target to prepare building external modules .PHONY: modules_prepare -modules_prepare: prepare-all scripts +modules_prepare: prepare scripts # Target to install modules .PHONY: modules_install @@ -949,26 +970,6 @@ modules modules_install: FORCE endif # CONFIG_MODULES -# Generate asm-offsets.h -# --------------------------------------------------------------------------- - -define filechk_gen-asm-offsets - (set -e; \ - echo "#ifndef __ASM_OFFSETS_H__"; \ - echo "#define __ASM_OFFSETS_H__"; \ - echo "/*"; \ - echo " * DO NOT MODIFY."; \ - echo " *"; \ - echo " * This file was generated by arch/$(ARCH)/Makefile"; \ - echo " *"; \ - echo " */"; \ - echo ""; \ - sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \ - echo ""; \ - echo "#endif" ) -endef - - ### # Cleaning is done on three levels. # make clean Delete most generated files @@ -991,7 +992,7 @@ MRPROPER_FILES += .config .config.old include/asm .version \ # clean: rm-dirs := $(CLEAN_DIRS) clean: rm-files := $(CLEAN_FILES) -clean-dirs := $(addprefix _clean_,$(vmlinux-alldirs)) +clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs)) .PHONY: $(clean-dirs) clean archclean $(clean-dirs): @@ -1070,6 +1071,7 @@ help: @echo ' rpm - Build a kernel as an RPM package' @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' + @echo ' kernelrelease - Output the release version string' @echo '' @echo 'Static analysers' @echo ' buildcheck - List dangling references to vmlinux discarded sections' diff --git a/trunk/README b/trunk/README index 76dd780d88ed..d1edcc7adabe 100644 --- a/trunk/README +++ b/trunk/README @@ -149,6 +149,9 @@ CONFIGURING the kernel: "make gconfig" X windows (Gtk) based configuration tool. "make oldconfig" Default all questions based on the contents of your existing ./.config file. + "make silentoldconfig" + Like above, but avoids cluttering the screen + with questions already answered. NOTES on "make config": - having unnecessary drivers will make the kernel bigger, and can @@ -169,9 +172,6 @@ CONFIGURING the kernel: should probably answer 'n' to the questions for "development", "experimental", or "debugging" features. - - Check the top Makefile for further site-dependent configuration - (default SVGA mode etc). - COMPILING the kernel: - Make sure you have gcc 2.95.3 available. @@ -199,6 +199,9 @@ COMPILING the kernel: are installing a new kernel with the same version number as your working kernel, make a backup of your modules directory before you do a "make modules_install". + Alternatively, before compiling, use the kernel config option + "LOCALVERSION" to append a unique suffix to the regular kernel version. + LOCALVERSION can be set in the "General Setup" menu. - In order to boot your new kernel, you'll need to copy the kernel image (e.g. .../linux/arch/i386/boot/bzImage after compilation) diff --git a/trunk/REPORTING-BUGS b/trunk/REPORTING-BUGS index 224c34741d32..f9da827a0c18 100644 --- a/trunk/REPORTING-BUGS +++ b/trunk/REPORTING-BUGS @@ -9,7 +9,7 @@ screen please read "Documentation/oops-tracing.txt" before posting your bug report. This explains what you should do with the "Oops" information to make it useful to the recipient. - Send the output the maintainer of the kernel area that seems to + Send the output to the maintainer of the kernel area that seems to be involved with the problem. Don't worry too much about getting the wrong person. If you are unsure send it to the person responsible for the code relevant to what you were doing. If it occurs repeatably try and @@ -18,15 +18,15 @@ The list of maintainers is in the MAINTAINERS file in this directory. If it is a security bug, please copy the Security Contact listed in the MAINTAINERS file. They can help coordinate bugfix and disclosure. -See Documentation/SecurityBugs for more infomation. +See Documentation/SecurityBugs for more information. If you are totally stumped as to whom to send the report, send it to linux-kernel@vger.kernel.org. (For more information on the linux-kernel mailing list see http://www.tux.org/lkml/). -This is a suggested format for a bug report sent to the Linux kernel mailing -list. Having a standardized bug report form makes it easier for you not to -overlook things, and easier for the developers to find the pieces of +This is a suggested format for a bug report sent to the Linux kernel mailing +list. Having a standardized bug report form makes it easier for you not to +overlook things, and easier for the developers to find the pieces of information they're really interested in. Don't feel you have to follow it. First run the ver_linux script included as scripts/ver_linux, which @@ -35,9 +35,9 @@ the command "sh scripts/ver_linux". Use that information to fill in all fields of the bug report form, and post it to the mailing list with a subject of "PROBLEM: " for easy identification by the developers +summary from [1.]>" for easy identification by the developers. -[1.] One line summary of the problem: +[1.] One line summary of the problem: [2.] Full description of the problem/report: [3.] Keywords (i.e., modules, networking, kernel): [4.] Kernel version (from /proc/version): diff --git a/trunk/arch/alpha/Kconfig b/trunk/arch/alpha/Kconfig index 189d5eababa8..786491f9ceb2 100644 --- a/trunk/arch/alpha/Kconfig +++ b/trunk/arch/alpha/Kconfig @@ -479,6 +479,9 @@ config EISA depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE default y +config ARCH_MAY_HAVE_PC_FDC + def_bool y + config SMP bool "Symmetric multi-processing support" depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL diff --git a/trunk/arch/alpha/Makefile b/trunk/arch/alpha/Makefile index 22ebfb2be0e4..1b704ee54bf3 100644 --- a/trunk/arch/alpha/Makefile +++ b/trunk/arch/alpha/Makefile @@ -108,20 +108,9 @@ $(boot)/vmlinux.gz: vmlinux bootimage bootpfile bootpzfile: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -prepare: include/asm-$(ARCH)/asm_offsets.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h - define archhelp echo '* boot - Compressed kernel image (arch/alpha/boot/vmlinux.gz)' echo ' bootimage - SRM bootable image (arch/alpha/boot/bootimage)' diff --git a/trunk/arch/alpha/kernel/alpha_ksyms.c b/trunk/arch/alpha/kernel/alpha_ksyms.c index fc5ef90c4fc9..24ae9a366073 100644 --- a/trunk/arch/alpha/kernel/alpha_ksyms.c +++ b/trunk/arch/alpha/kernel/alpha_ksyms.c @@ -185,15 +185,6 @@ EXPORT_SYMBOL(smp_num_cpus); EXPORT_SYMBOL(smp_call_function); EXPORT_SYMBOL(smp_call_function_on_cpu); EXPORT_SYMBOL(_atomic_dec_and_lock); -#ifdef CONFIG_DEBUG_SPINLOCK -EXPORT_SYMBOL(_raw_spin_unlock); -EXPORT_SYMBOL(debug_spin_lock); -EXPORT_SYMBOL(debug_spin_trylock); -#endif -#ifdef CONFIG_DEBUG_RWLOCK -EXPORT_SYMBOL(_raw_write_lock); -EXPORT_SYMBOL(_raw_read_lock); -#endif EXPORT_SYMBOL(cpu_present_mask); #endif /* CONFIG_SMP */ diff --git a/trunk/arch/alpha/kernel/entry.S b/trunk/arch/alpha/kernel/entry.S index f0927ee53f29..e38671c922bc 100644 --- a/trunk/arch/alpha/kernel/entry.S +++ b/trunk/arch/alpha/kernel/entry.S @@ -5,7 +5,7 @@ */ #include -#include +#include #include #include #include @@ -196,6 +196,7 @@ entUna: stq $26, 208($sp) stq $27, 216($sp) stq $28, 224($sp) + mov $sp, $19 stq $gp, 232($sp) lda $8, 0x3fff stq $31, 248($sp) diff --git a/trunk/arch/alpha/kernel/head.S b/trunk/arch/alpha/kernel/head.S index 4ca2e404708a..0905721fcbca 100644 --- a/trunk/arch/alpha/kernel/head.S +++ b/trunk/arch/alpha/kernel/head.S @@ -9,7 +9,7 @@ #include #include -#include +#include .globl swapper_pg_dir .globl _stext diff --git a/trunk/arch/alpha/kernel/module.c b/trunk/arch/alpha/kernel/module.c index fc271e316a38..aac6d4b22f7a 100644 --- a/trunk/arch/alpha/kernel/module.c +++ b/trunk/arch/alpha/kernel/module.c @@ -47,7 +47,7 @@ module_free(struct module *mod, void *module_region) struct got_entry { struct got_entry *next; - Elf64_Addr r_offset; + Elf64_Sxword r_addend; int got_offset; }; @@ -57,14 +57,14 @@ process_reloc_for_got(Elf64_Rela *rela, { unsigned long r_sym = ELF64_R_SYM (rela->r_info); unsigned long r_type = ELF64_R_TYPE (rela->r_info); - Elf64_Addr r_offset = rela->r_offset; + Elf64_Sxword r_addend = rela->r_addend; struct got_entry *g; if (r_type != R_ALPHA_LITERAL) return; for (g = chains + r_sym; g ; g = g->next) - if (g->r_offset == r_offset) { + if (g->r_addend == r_addend) { if (g->got_offset == 0) { g->got_offset = *poffset; *poffset += 8; @@ -74,7 +74,7 @@ process_reloc_for_got(Elf64_Rela *rela, g = kmalloc (sizeof (*g), GFP_KERNEL); g->next = chains[r_sym].next; - g->r_offset = r_offset; + g->r_addend = r_addend; g->got_offset = *poffset; *poffset += 8; chains[r_sym].next = g; diff --git a/trunk/arch/alpha/kernel/osf_sys.c b/trunk/arch/alpha/kernel/osf_sys.c index 167fd89f8707..01fe990d3e54 100644 --- a/trunk/arch/alpha/kernel/osf_sys.c +++ b/trunk/arch/alpha/kernel/osf_sys.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -974,6 +975,8 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, size_t size; long timeout; int ret = -EINVAL; + struct fdtable *fdt; + int max_fdset; timeout = MAX_SCHEDULE_TIMEOUT; if (tvp) { @@ -995,7 +998,11 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, } } - if (n < 0 || n > current->files->max_fdset) + rcu_read_lock(); + fdt = files_fdtable(current->files); + max_fdset = fdt->max_fdset; + rcu_read_unlock(); + if (n < 0 || n > max_fdset) goto out_nofds; /* @@ -1152,8 +1159,7 @@ osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remai ticks = timeval_to_jiffies(&tmp); - current->state = TASK_INTERRUPTIBLE; - ticks = schedule_timeout(ticks); + ticks = schedule_timeout_interruptible(ticks); if (remain) { jiffies_to_timeval(ticks, &tmp); diff --git a/trunk/arch/alpha/kernel/process.c b/trunk/arch/alpha/kernel/process.c index fa98dae3cd98..eb20c3afff58 100644 --- a/trunk/arch/alpha/kernel/process.c +++ b/trunk/arch/alpha/kernel/process.c @@ -127,6 +127,10 @@ common_shutdown_1(void *generic_ptr) /* If booted from SRM, reset some of the original environment. */ if (alpha_using_srm) { #ifdef CONFIG_DUMMY_CONSOLE + /* If we've gotten here after SysRq-b, leave interrupt + context before taking over the console. */ + if (in_interrupt()) + irq_exit(); /* This has the effect of resetting the VGA video origin. */ take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1); #endif diff --git a/trunk/arch/alpha/kernel/smp.c b/trunk/arch/alpha/kernel/smp.c index e211aa7404e6..da0be3465791 100644 --- a/trunk/arch/alpha/kernel/smp.c +++ b/trunk/arch/alpha/kernel/smp.c @@ -989,175 +989,3 @@ flush_icache_user_range(struct vm_area_struct *vma, struct page *page, preempt_enable(); } - -#ifdef CONFIG_DEBUG_SPINLOCK -void -_raw_spin_unlock(spinlock_t * lock) -{ - mb(); - lock->lock = 0; - - lock->on_cpu = -1; - lock->previous = NULL; - lock->task = NULL; - lock->base_file = "none"; - lock->line_no = 0; -} - -void -debug_spin_lock(spinlock_t * lock, const char *base_file, int line_no) -{ - long tmp; - long stuck; - void *inline_pc = __builtin_return_address(0); - unsigned long started = jiffies; - int printed = 0; - int cpu = smp_processor_id(); - - stuck = 1L << 30; - try_again: - - /* Use sub-sections to put the actual loop at the end - of this object file's text section so as to perfect - branch prediction. */ - __asm__ __volatile__( - "1: ldl_l %0,%1\n" - " subq %2,1,%2\n" - " blbs %0,2f\n" - " or %0,1,%0\n" - " stl_c %0,%1\n" - " beq %0,3f\n" - "4: mb\n" - ".subsection 2\n" - "2: ldl %0,%1\n" - " subq %2,1,%2\n" - "3: blt %2,4b\n" - " blbs %0,2b\n" - " br 1b\n" - ".previous" - : "=r" (tmp), "=m" (lock->lock), "=r" (stuck) - : "m" (lock->lock), "2" (stuck) : "memory"); - - if (stuck < 0) { - printk(KERN_WARNING - "%s:%d spinlock stuck in %s at %p(%d)" - " owner %s at %p(%d) %s:%d\n", - base_file, line_no, - current->comm, inline_pc, cpu, - lock->task->comm, lock->previous, - lock->on_cpu, lock->base_file, lock->line_no); - stuck = 1L << 36; - printed = 1; - goto try_again; - } - - /* Exiting. Got the lock. */ - lock->on_cpu = cpu; - lock->previous = inline_pc; - lock->task = current; - lock->base_file = base_file; - lock->line_no = line_no; - - if (printed) { - printk(KERN_WARNING - "%s:%d spinlock grabbed in %s at %p(%d) %ld ticks\n", - base_file, line_no, current->comm, inline_pc, - cpu, jiffies - started); - } -} - -int -debug_spin_trylock(spinlock_t * lock, const char *base_file, int line_no) -{ - int ret; - if ((ret = !test_and_set_bit(0, lock))) { - lock->on_cpu = smp_processor_id(); - lock->previous = __builtin_return_address(0); - lock->task = current; - } else { - lock->base_file = base_file; - lock->line_no = line_no; - } - return ret; -} -#endif /* CONFIG_DEBUG_SPINLOCK */ - -#ifdef CONFIG_DEBUG_RWLOCK -void _raw_write_lock(rwlock_t * lock) -{ - long regx, regy; - int stuck_lock, stuck_reader; - void *inline_pc = __builtin_return_address(0); - - try_again: - - stuck_lock = 1<<30; - stuck_reader = 1<<30; - - __asm__ __volatile__( - "1: ldl_l %1,%0\n" - " blbs %1,6f\n" - " blt %1,8f\n" - " mov 1,%1\n" - " stl_c %1,%0\n" - " beq %1,6f\n" - "4: mb\n" - ".subsection 2\n" - "6: blt %3,4b # debug\n" - " subl %3,1,%3 # debug\n" - " ldl %1,%0\n" - " blbs %1,6b\n" - "8: blt %4,4b # debug\n" - " subl %4,1,%4 # debug\n" - " ldl %1,%0\n" - " blt %1,8b\n" - " br 1b\n" - ".previous" - : "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (regy), - "=&r" (stuck_lock), "=&r" (stuck_reader) - : "m" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory"); - - if (stuck_lock < 0) { - printk(KERN_WARNING "write_lock stuck at %p\n", inline_pc); - goto try_again; - } - if (stuck_reader < 0) { - printk(KERN_WARNING "write_lock stuck on readers at %p\n", - inline_pc); - goto try_again; - } -} - -void _raw_read_lock(rwlock_t * lock) -{ - long regx; - int stuck_lock; - void *inline_pc = __builtin_return_address(0); - - try_again: - - stuck_lock = 1<<30; - - __asm__ __volatile__( - "1: ldl_l %1,%0;" - " blbs %1,6f;" - " subl %1,2,%1;" - " stl_c %1,%0;" - " beq %1,6f;" - "4: mb\n" - ".subsection 2\n" - "6: ldl %1,%0;" - " blt %2,4b # debug\n" - " subl %2,1,%2 # debug\n" - " blbs %1,6b;" - " br 1b\n" - ".previous" - : "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (stuck_lock) - : "m" (*(volatile int *)lock), "2" (stuck_lock) : "memory"); - - if (stuck_lock < 0) { - printk(KERN_WARNING "read_lock stuck at %p\n", inline_pc); - goto try_again; - } -} -#endif /* CONFIG_DEBUG_RWLOCK */ diff --git a/trunk/arch/alpha/kernel/sys_dp264.c b/trunk/arch/alpha/kernel/sys_dp264.c index 9e36b07fa940..d5da6b1b28ee 100644 --- a/trunk/arch/alpha/kernel/sys_dp264.c +++ b/trunk/arch/alpha/kernel/sys_dp264.c @@ -394,6 +394,22 @@ clipper_init_irq(void) * 10 64 bit PCI option slot 3 (not bus 0) */ +static int __init +isa_irq_fixup(struct pci_dev *dev, int irq) +{ + u8 irq8; + + if (irq > 0) + return irq; + + /* This interrupt is routed via ISA bridge, so we'll + just have to trust whatever value the console might + have assigned. */ + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8); + + return irq8 & 0xf; +} + static int __init dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { @@ -407,25 +423,13 @@ dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */ }; const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; - struct pci_controller *hose = dev->sysdata; int irq = COMMON_TABLE_LOOKUP; - if (irq > 0) { + if (irq > 0) irq += 16 * hose->index; - } else { - /* ??? The Contaq IDE controller on the ISA bridge uses - "legacy" interrupts 14 and 15. I don't know if anything - can wind up at the same slot+pin on hose1, so we'll - just have to trust whatever value the console might - have assigned. */ - - u8 irq8; - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8); - irq = irq8; - } - return irq; + return isa_irq_fixup(dev, irq); } static int __init @@ -453,7 +457,8 @@ monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/ }; const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5; - return COMMON_TABLE_LOOKUP; + + return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); } static u8 __init @@ -507,7 +512,8 @@ webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */ }; const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5; - return COMMON_TABLE_LOOKUP; + + return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); } static int __init @@ -524,14 +530,13 @@ clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */ }; const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5; - struct pci_controller *hose = dev->sysdata; int irq = COMMON_TABLE_LOOKUP; if (irq > 0) irq += 16 * hose->index; - return irq; + return isa_irq_fixup(dev, irq); } static void __init diff --git a/trunk/arch/alpha/kernel/sys_marvel.c b/trunk/arch/alpha/kernel/sys_marvel.c index 804727853d25..e32fee505220 100644 --- a/trunk/arch/alpha/kernel/sys_marvel.c +++ b/trunk/arch/alpha/kernel/sys_marvel.c @@ -373,12 +373,11 @@ marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin) irq += 0x80; /* offset for lsi */ #if 1 - printk("PCI:%d:%d:%d (hose %d) [%s] is using MSI\n", + printk("PCI:%d:%d:%d (hose %d) is using MSI\n", dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), - hose->index, - pci_pretty_name (dev)); + hose->index); printk(" %d message(s) from 0x%04x\n", 1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4), msg_dat); diff --git a/trunk/arch/alpha/kernel/time.c b/trunk/arch/alpha/kernel/time.c index 8226c5cd788c..67be50b7d80a 100644 --- a/trunk/arch/alpha/kernel/time.c +++ b/trunk/arch/alpha/kernel/time.c @@ -149,7 +149,7 @@ irqreturn_t timer_interrupt(int irq, void *dev, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 + if (ntp_synced() && xtime.tv_sec > state.last_rtc_update + 660 && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2 && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -502,10 +502,7 @@ do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); diff --git a/trunk/arch/alpha/kernel/traps.c b/trunk/arch/alpha/kernel/traps.c index 6f509a644bdd..f9d12319e0fb 100644 --- a/trunk/arch/alpha/kernel/traps.c +++ b/trunk/arch/alpha/kernel/traps.c @@ -446,16 +446,15 @@ struct unaligned_stat { /* Macro for exception fixup code to access integer registers. */ -#define una_reg(r) (regs.regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) +#define una_reg(r) (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) asmlinkage void do_entUna(void * va, unsigned long opcode, unsigned long reg, - unsigned long a3, unsigned long a4, unsigned long a5, - struct allregs regs) + struct allregs *regs) { long error, tmp1, tmp2, tmp3, tmp4; - unsigned long pc = regs.pc - 4; + unsigned long pc = regs->pc - 4; const struct exception_table_entry *fixup; unaligned[0].count++; @@ -636,7 +635,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg, printk("Forwarding unaligned exception at %lx (%lx)\n", pc, newpc); - (®s)->pc = newpc; + regs->pc = newpc; return; } @@ -650,7 +649,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg, current->comm, current->pid); printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx\n", - pc, una_reg(26), regs.ps); + pc, una_reg(26), regs->ps); printk("r0 = %016lx r1 = %016lx r2 = %016lx\n", una_reg(0), una_reg(1), una_reg(2)); printk("r3 = %016lx r4 = %016lx r5 = %016lx\n", @@ -670,10 +669,10 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg, una_reg(22), una_reg(23), una_reg(24)); printk("r25= %016lx r27= %016lx r28= %016lx\n", una_reg(25), una_reg(27), una_reg(28)); - printk("gp = %016lx sp = %p\n", regs.gp, ®s+1); + printk("gp = %016lx sp = %p\n", regs->gp, regs+1); dik_show_code((unsigned int *)pc); - dik_show_trace((unsigned long *)(®s+1)); + dik_show_trace((unsigned long *)(regs+1)); if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) { printk("die_if_kernel recursion detected.\n"); diff --git a/trunk/arch/alpha/lib/dbg_stackcheck.S b/trunk/arch/alpha/lib/dbg_stackcheck.S index cc5ce3a5fcad..3c1f3e6522e5 100644 --- a/trunk/arch/alpha/lib/dbg_stackcheck.S +++ b/trunk/arch/alpha/lib/dbg_stackcheck.S @@ -5,7 +5,7 @@ * Verify that we have not overflowed the stack. Oops if we have. */ -#include +#include .text .set noat diff --git a/trunk/arch/alpha/lib/dbg_stackkill.S b/trunk/arch/alpha/lib/dbg_stackkill.S index e09f2ae1e09e..e9f6a9dcf2b7 100644 --- a/trunk/arch/alpha/lib/dbg_stackkill.S +++ b/trunk/arch/alpha/lib/dbg_stackkill.S @@ -6,7 +6,7 @@ * uninitialized local variables in the act. */ -#include +#include .text .set noat diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index 68dfdba71d74..11fff042aa81 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -64,6 +64,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_BUST_SPINLOCK bool +config ARCH_MAY_HAVE_PC_FDC + bool + config GENERIC_ISA_DMA bool @@ -150,6 +153,7 @@ config ARCH_RPC select ARCH_ACORN select FIQ select TIMER_ACORN + select ARCH_MAY_HAVE_PC_FDC help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -322,8 +326,8 @@ config SMP processor machines. On a single processor machine, the kernel will run faster if you say N here. - See also the , - , , + See also the , + , and the SMP-HOWTO available at . diff --git a/trunk/arch/arm/Kconfig.debug b/trunk/arch/arm/Kconfig.debug index 45a5709eaaa4..5d3acff8c596 100644 --- a/trunk/arch/arm/Kconfig.debug +++ b/trunk/arch/arm/Kconfig.debug @@ -53,7 +53,7 @@ config DEBUG_LL bool "Kernel low-level debugging functions" depends on DEBUG_KERNEL help - Say Y here to include definitions of printascii, printchar, printhex + Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. diff --git a/trunk/arch/arm/Makefile b/trunk/arch/arm/Makefile index 67f1453ade05..299bc0468702 100644 --- a/trunk/arch/arm/Makefile +++ b/trunk/arch/arm/Makefile @@ -53,7 +53,7 @@ tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale -tune-$(CONFIG_CPU_V6) :=-mtune=strongarm +tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) # Need -Uarm for gcc < 3.x CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) @@ -175,10 +175,10 @@ else endif @touch $@ -prepare: maketools include/asm-arm/.arch +archprepare: maketools .PHONY: maketools FORCE -maketools: include/asm-arm/constants.h include/linux/version.h FORCE +maketools: include/linux/version.h include/asm-arm/.arch FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h # Convert bzImage to zImage @@ -190,7 +190,7 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -CLEAN_FILES += include/asm-arm/constants.h* include/asm-arm/mach-types.h \ +CLEAN_FILES += include/asm-arm/mach-types.h \ include/asm-arm/arch include/asm-arm/.arch # We use MRPROPER_FILES and CLEAN_FILES now @@ -201,11 +201,6 @@ archclean: bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/asm-arm/.arch - -include/asm-$(ARCH)/constants.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) define archhelp echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' diff --git a/trunk/arch/arm/boot/compressed/head-sharpsl.S b/trunk/arch/arm/boot/compressed/head-sharpsl.S index d6bf8a2b090d..59ad69640d6b 100644 --- a/trunk/arch/arm/boot/compressed/head-sharpsl.S +++ b/trunk/arch/arm/boot/compressed/head-sharpsl.S @@ -7,7 +7,8 @@ * so we have to figure out the machine for ourselves... * * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750) - * and Husky (SL-C760). + * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000), + * Akita (SL-C1000) and Borzoi (SL-C3100). * */ @@ -23,6 +24,22 @@ __SharpSL_start: +/* Check for TC6393 - if found we have a Tosa */ + ldr r7, .TOSAID + mov r1, #0x10000000 @ Base address of TC6393 chip + mov r6, #0x03 + ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003 + cmp r6, r3 + beq .SHARPEND @ Success -> tosa + +/* Check for pxa270 - if found, branch */ + mrc p15, 0, r4, c0, c0 @ Get Processor ID + and r4, r4, #0xffffff00 + ldr r3, .PXA270ID + cmp r4, r3 + beq .PXA270 + +/* Check for w100 - if not found we have a Poodle */ ldr r1, .W100ADDR @ Base address of w100 chip + regs offset mov r6, #0x31 @ Load Magic Init value @@ -30,7 +47,7 @@ __SharpSL_start: mov r5, #0x3000 .W100LOOP: subs r5, r5, #1 - bne .W100LOOP + bne .W100LOOP mov r6, #0x30 @ Load 2nd Magic Init value str r6, [r1, #0x280] @ to SCRATCH_UMSK @@ -40,45 +57,52 @@ __SharpSL_start: cmp r6, r3 bne .SHARPEND @ We have no w100 - Poodle - mrc p15, 0, r6, c0, c0 @ Get Processor ID - and r6, r6, #0xffffff00 +/* Check for pxa250 - if found we have a Corgi */ ldr r7, .CORGIID ldr r3, .PXA255ID - cmp r6, r3 + cmp r4, r3 blo .SHARPEND @ We have a PXA250 - Corgi - mov r1, #0x0c000000 @ Base address of NAND chip - ldrb r3, [r1, #24] @ Load FLASHCTL - bic r3, r3, #0x11 @ SET NCE - orr r3, r3, #0x0a @ SET CLR + FLWP - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0x90 @ Command "readid" - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #2 @ CLR CLE - orr r3, r3, #4 @ SET ALE - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0 @ Address 0x00 - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #4 @ CLR ALE - strb r3, [r1, #24] @ Save to FLASHCTL -.SHARP1: - ldrb r3, [r1, #24] @ Load FLASHCTL - tst r3, #32 @ Is chip ready? - beq .SHARP1 - ldrb r2, [r1, #20] @ NAND Manufacturer ID - ldrb r3, [r1, #20] @ NAND Chip ID +/* Check for 64MiB flash - if found we have a Shepherd */ + bl get_flash_ids ldr r7, .SHEPHERDID cmp r3, #0x76 @ 64MiB flash beq .SHARPEND @ We have Shepherd + +/* Must be a Husky */ ldr r7, .HUSKYID @ Must be Husky b .SHARPEND +.PXA270: +/* Check for 16MiB flash - if found we have Spitz */ + bl get_flash_ids + ldr r7, .SPITZID + cmp r3, #0x73 @ 16MiB flash + beq .SHARPEND @ We have Spitz + +/* Check for a second SCOOP chip - if found we have Borzoi */ + ldr r1, .SCOOP2ADDR + ldr r7, .BORZOIID + mov r6, #0x0140 + strh r6, [r1] + ldrh r6, [r1] + cmp r6, #0x0140 + beq .SHARPEND @ We have Borzoi + +/* Must be Akita */ + ldr r7, .AKITAID + b .SHARPEND @ We have Borzoi + .PXA255ID: .word 0x69052d00 @ PXA255 Processor ID +.PXA270ID: + .word 0x69054100 @ PXA270 Processor ID .W100ID: .word 0x57411002 @ w100 Chip ID .W100ADDR: .word 0x08010000 @ w100 Chip ID Reg Address +.SCOOP2ADDR: + .word 0x08800040 .POODLEID: .word MACH_TYPE_POODLE .CORGIID: @@ -87,6 +111,41 @@ __SharpSL_start: .word MACH_TYPE_SHEPHERD .HUSKYID: .word MACH_TYPE_HUSKY -.SHARPEND: +.TOSAID: + .word MACH_TYPE_TOSA +.SPITZID: + .word MACH_TYPE_SPITZ +.AKITAID: + .word MACH_TYPE_AKITA +.BORZOIID: + .word MACH_TYPE_BORZOI +/* + * Return: r2 - NAND Manufacturer ID + * r3 - NAND Chip ID + * Corrupts: r1 + */ +get_flash_ids: + mov r1, #0x0c000000 @ Base address of NAND chip + ldrb r3, [r1, #24] @ Load FLASHCTL + bic r3, r3, #0x11 @ SET NCE + orr r3, r3, #0x0a @ SET CLR + FLWP + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0x90 @ Command "readid" + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #2 @ CLR CLE + orr r3, r3, #4 @ SET ALE + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0 @ Address 0x00 + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #4 @ CLR ALE + strb r3, [r1, #24] @ Save to FLASHCTL +.fids1: + ldrb r3, [r1, #24] @ Load FLASHCTL + tst r3, #32 @ Is chip ready? + beq .fids1 + ldrb r2, [r1, #20] @ NAND Manufacturer ID + ldrb r3, [r1, #20] @ NAND Chip ID + mov pc, lr +.SHARPEND: diff --git a/trunk/arch/arm/boot/compressed/ofw-shark.c b/trunk/arch/arm/boot/compressed/ofw-shark.c index 7f6f5db0d060..465c54b6b128 100644 --- a/trunk/arch/arm/boot/compressed/ofw-shark.c +++ b/trunk/arch/arm/boot/compressed/ofw-shark.c @@ -256,5 +256,5 @@ asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer) temp[11]='\0'; mem_len = OF_getproplen(o,phandle, temp); OF_getprop(o,phandle, temp, buffer, mem_len); - (unsigned char) pointer[32] = ((unsigned char *) buffer)[mem_len-2]; + * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2]; } diff --git a/trunk/arch/arm/common/gic.c b/trunk/arch/arm/common/gic.c index d74990717559..c02dc8116a18 100644 --- a/trunk/arch/arm/common/gic.c +++ b/trunk/arch/arm/common/gic.c @@ -68,6 +68,7 @@ static void gic_unmask_irq(unsigned int irq) writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4); } +#ifdef CONFIG_SMP static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu) { void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3); @@ -78,6 +79,7 @@ static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu val |= 1 << (cpu + shift); writel(val, reg); } +#endif static struct irqchip gic_chip = { .ack = gic_ack_irq, diff --git a/trunk/arch/arm/common/locomo.c b/trunk/arch/arm/common/locomo.c index 51f430cc2fbf..e8053d16829b 100644 --- a/trunk/arch/arm/common/locomo.c +++ b/trunk/arch/arm/common/locomo.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include @@ -541,6 +540,103 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) return ret; } +#ifdef CONFIG_PM + +struct locomo_save_data { + u16 LCM_GPO; + u16 LCM_SPICT; + u16 LCM_GPE; + u16 LCM_ASD; + u16 LCM_SPIMD; +}; + +static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) +{ + struct locomo *lchip = dev_get_drvdata(dev); + struct locomo_save_data *save; + unsigned long flags; + + if (level != SUSPEND_DISABLE) + return 0; + + save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL); + if (!save) + return -ENOMEM; + + dev->power.saved_state = (void *) save; + + spin_lock_irqsave(&lchip->lock, flags); + + save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ + locomo_writel(0x00, lchip->base + LOCOMO_GPO); + save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */ + locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ + locomo_writel(0x00, lchip->base + LOCOMO_GPE); + save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ + locomo_writel(0x00, lchip->base + LOCOMO_ASD); + save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */ + locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD); + + locomo_writel(0x00, lchip->base + LOCOMO_PAIF); + locomo_writel(0x00, lchip->base + LOCOMO_DAC); + locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC); + + if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) ) + locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */ + else + /* 18MHz already enabled, so no wait */ + locomo_writel(0xc1, lchip->base + LOCOMO_C32K); /* CLK32 on */ + + locomo_writel(0x00, lchip->base + LOCOMO_TADC); /* 18MHz clock off*/ + locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); /* 22MHz/24MHz clock off */ + locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); /* FL */ + + spin_unlock_irqrestore(&lchip->lock, flags); + + return 0; +} + +static int locomo_resume(struct device *dev, u32 level) +{ + struct locomo *lchip = dev_get_drvdata(dev); + struct locomo_save_data *save; + unsigned long r; + unsigned long flags; + + if (level != RESUME_ENABLE) + return 0; + + save = (struct locomo_save_data *) dev->power.saved_state; + if (!save) + return 0; + + spin_lock_irqsave(&lchip->lock, flags); + + locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO); + locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT); + locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE); + locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD); + locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD); + + locomo_writel(0x00, lchip->base + LOCOMO_C32K); + locomo_writel(0x90, lchip->base + LOCOMO_TADC); + + locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC); + r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); + r &= 0xFEFF; + locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); + locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD); + + spin_unlock_irqrestore(&lchip->lock, flags); + + dev->power.saved_state = NULL; + kfree(save); + + return 0; +} +#endif + /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -707,6 +803,10 @@ static struct device_driver locomo_device_driver = { .bus = &platform_bus_type, .probe = locomo_probe, .remove = locomo_remove, +#ifdef CONFIG_PM + .suspend = locomo_suspend, + .resume = locomo_resume, +#endif }; /* diff --git a/trunk/arch/arm/common/scoop.c b/trunk/arch/arm/common/scoop.c index 688a595598c8..9e5245c702de 100644 --- a/trunk/arch/arm/common/scoop.c +++ b/trunk/arch/arm/common/scoop.c @@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs; struct scoop_dev { void *base; spinlock_t scoop_lock; + unsigned short suspend_clr; + unsigned short suspend_set; u32 scoop_gpwr; }; @@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop); EXPORT_SYMBOL(read_scoop_reg); EXPORT_SYMBOL(write_scoop_reg); +static void check_scoop_reg(struct scoop_dev *sdev) +{ + unsigned short mcr; + + mcr = SCOOP_REG(sdev->base, SCOOP_MCR); + if ((mcr & 0x100) == 0) + SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101; +} + #ifdef CONFIG_PM -static int scoop_suspend(struct device *dev, uint32_t state, uint32_t level) +static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level) { if (level == SUSPEND_POWER_DOWN) { struct scoop_dev *sdev = dev_get_drvdata(dev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR); - SCOOP_REG(sdev->base,SCOOP_GPWR) = 0; + check_scoop_reg(sdev); + sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); + SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; } return 0; } @@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level) if (level == RESUME_POWER_ON) { struct scoop_dev *sdev = dev_get_drvdata(dev); + check_scoop_reg(sdev); SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; } return 0; @@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev) SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; + devptr->suspend_clr = inf->suspend_clr; + devptr->suspend_set = inf->suspend_set; + return 0; } diff --git a/trunk/arch/arm/configs/collie_defconfig b/trunk/arch/arm/configs/collie_defconfig new file mode 100644 index 000000000000..40dfe07a8bce --- /dev/null +++ b/trunk/arch/arm/configs/collie_defconfig @@ -0,0 +1,888 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 16:55:14 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_SA1100=y +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# SA11x0 Implementations +# +# CONFIG_SA1100_ASSABET is not set +# CONFIG_SA1100_CERF is not set +CONFIG_SA1100_COLLIE=y +# CONFIG_SA1100_H3100 is not set +# CONFIG_SA1100_H3600 is not set +# CONFIG_SA1100_H3800 is not set +# CONFIG_SA1100_BADGE4 is not set +# CONFIG_SA1100_JORNADA720 is not set +# CONFIG_SA1100_HACKKIT is not set +# CONFIG_SA1100_LART is not set +# CONFIG_SA1100_PLEB is not set +# CONFIG_SA1100_SHANNON is not set +# CONFIG_SA1100_SIMPAD is not set +# CONFIG_SA1100_SSP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_SA1100=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_CACHE_V4WB=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WB=y + +# +# Processor Features +# +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA=y +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_OBSOLETE_CHIPS=y +# CONFIG_MTD_AMDSTD is not set +CONFIG_MTD_SHARP=y +# CONFIG_MTD_JEDEC is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SA1100=y +CONFIG_SERIAL_SA1100_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=m +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# +# CONFIG_MCP_SA11X0 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/trunk/arch/arm/configs/corgi_defconfig b/trunk/arch/arm/configs/corgi_defconfig new file mode 100644 index 000000000000..24987c89609a --- /dev/null +++ b/trunk/arch/arm/configs/corgi_defconfig @@ -0,0 +1,1523 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 15:46:42 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +# CONFIG_MACH_POODLE is not set +CONFIG_MACH_CORGI=y +CONFIG_MACH_SHEPHERD=y +CONFIG_MACH_HUSKY=y +CONFIG_PXA25x=y +CONFIG_PXA_SHARP_C7xx=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +# CONFIG_IP_NF_TARGET_MARK is not set +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_TARGET_NOTRACK is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_BCSP_TXCRC=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_CORGI=y +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_PXA is not set +CONFIG_FB_W100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CORGI=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_SOUND_OSS=y +# CONFIG_SOUND_TRACEINIT is not set +# CONFIG_SOUND_DMAP is not set +# CONFIG_SOUND_AD1816 is not set +# CONFIG_SOUND_SGALAXY is not set +# CONFIG_SOUND_ADLIB is not set +# CONFIG_SOUND_ACI_MIXER is not set +# CONFIG_SOUND_CS4232 is not set +# CONFIG_SOUND_SSCAPE is not set +# CONFIG_SOUND_GUS is not set +# CONFIG_SOUND_VMIDI is not set +# CONFIG_SOUND_TRIX is not set +# CONFIG_SOUND_MSS is not set +# CONFIG_SOUND_MPU401 is not set +# CONFIG_SOUND_NM256 is not set +# CONFIG_SOUND_MAD16 is not set +# CONFIG_SOUND_PAS is not set +# CONFIG_SOUND_PSS is not set +# CONFIG_SOUND_SB is not set +# CONFIG_SOUND_AWE32_SYNTH is not set +# CONFIG_SOUND_WAVEFRONT is not set +# CONFIG_SOUND_MAUI is not set +# CONFIG_SOUND_YM3812 is not set +# CONFIG_SOUND_OPL3SA1 is not set +# CONFIG_SOUND_OPL3SA2 is not set +# CONFIG_SOUND_UART6850 is not set +# CONFIG_SOUND_AEDSP16 is not set +# CONFIG_SOUND_TVMIXER is not set +# CONFIG_SOUND_AD1980 is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_AIPTEK=m +CONFIG_USB_WACOM=m +# CONFIG_USB_ACECAD is not set +CONFIG_USB_KBTAB=m +CONFIG_USB_POWERMATE=m +CONFIG_USB_MTOUCH=m +# CONFIG_USB_ITMTOUCH is not set +CONFIG_USB_EGALAX=m +# CONFIG_USB_YEALINK is not set +CONFIG_USB_XPAD=m +CONFIG_USB_ATI_REMOTE=m +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m +CONFIG_USB_VICAM=m +CONFIG_USB_DSBR=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_PWC is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/trunk/arch/arm/configs/enp2611_defconfig b/trunk/arch/arm/configs/enp2611_defconfig index f67ca01b4982..30e6444f9aaa 100644 --- a/trunk/arch/arm/configs/enp2611_defconfig +++ b/trunk/arch/arm/configs/enp2611_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:41:21 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:51:52 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -135,7 +135,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -178,6 +177,68 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + # # Device Drivers # @@ -248,6 +309,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -334,72 +396,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -509,6 +507,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -635,7 +635,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -649,11 +649,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -679,30 +696,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -770,6 +772,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -812,8 +815,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/trunk/arch/arm/configs/ixdp2400_defconfig b/trunk/arch/arm/configs/ixdp2400_defconfig index 5c6c928215d0..678720fa2e2e 100644 --- a/trunk/arch/arm/configs/ixdp2400_defconfig +++ b/trunk/arch/arm/configs/ixdp2400_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:01 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:01 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -179,6 +178,68 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + # # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -510,6 +508,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -636,7 +636,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -650,11 +650,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -680,30 +697,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -771,6 +773,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -813,8 +816,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/trunk/arch/arm/configs/ixdp2401_defconfig b/trunk/arch/arm/configs/ixdp2401_defconfig index 6dc40f6be0ef..38c9a721d5c9 100644 --- a/trunk/arch/arm/configs/ixdp2401_defconfig +++ b/trunk/arch/arm/configs/ixdp2401_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:08 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:10 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -179,6 +178,68 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + # # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -511,6 +509,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,11 +651,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -681,30 +698,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -772,6 +774,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -814,8 +817,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/trunk/arch/arm/configs/ixdp2800_defconfig b/trunk/arch/arm/configs/ixdp2800_defconfig index d2bb0b7153fe..261e2343903b 100644 --- a/trunk/arch/arm/configs/ixdp2800_defconfig +++ b/trunk/arch/arm/configs/ixdp2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:20 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:23 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -179,6 +178,68 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + # # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -510,6 +508,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -636,7 +636,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -650,11 +650,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -680,30 +697,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -771,6 +773,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -813,8 +816,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/trunk/arch/arm/configs/ixdp2801_defconfig b/trunk/arch/arm/configs/ixdp2801_defconfig index 2d6f960e3395..12ef23d1c016 100644 --- a/trunk/arch/arm/configs/ixdp2801_defconfig +++ b/trunk/arch/arm/configs/ixdp2801_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:13 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:16 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -179,6 +178,68 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + # # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -511,6 +509,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,11 +651,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -681,30 +698,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -772,6 +774,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -814,8 +817,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/trunk/arch/arm/configs/ixp4xx_defconfig b/trunk/arch/arm/configs/ixp4xx_defconfig index 94aafec5fb46..c279e41ed10e 100644 --- a/trunk/arch/arm/configs/ixp4xx_defconfig +++ b/trunk/arch/arm/configs/ixp4xx_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:53:40 2005 +# Linux kernel version: 2.6.14-rc1-git5 +# Tue Sep 20 17:26:28 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,11 +15,13 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,10 +32,13 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -81,6 +85,7 @@ CONFIG_ARCH_IXP4XX=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -90,15 +95,16 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # # IXP4xx Platforms # -# CONFIG_ARCH_AVILA is not set +CONFIG_ARCH_AVILA=y CONFIG_ARCH_ADI_COYOTE=y CONFIG_ARCH_IXDP425=y -# CONFIG_MACH_IXDPG425 is not set -# CONFIG_MACH_IXDP465 is not set +CONFIG_MACH_IXDPG425=y +CONFIG_MACH_IXDP465=y CONFIG_ARCH_IXCDP1100=y CONFIG_ARCH_PRPMC1100=y CONFIG_ARCH_IXDP4XX=y -# CONFIG_MACH_GTWX5715 is not set +CONFIG_CPU_IXP46X=y +CONFIG_MACH_GTWX5715=y # # IXP4xx Options @@ -114,7 +120,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -127,9 +132,10 @@ CONFIG_DMABOUNCE=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -140,6 +146,15 @@ CONFIG_PCI_NAMES=y # Kernel Features # # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_ALIGNMENT_TRAP=y # @@ -174,6 +189,241 @@ CONFIG_BINFMT_ELF=y CONFIG_PM=y CONFIG_APM=y +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_FWMARK=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +CONFIG_IP_VS=m +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +# CONFIG_IP_VS_PROTO_TCP is not set +# CONFIG_IP_VS_PROTO_UDP is not set +# CONFIG_IP_VS_PROTO_ESP is not set +# CONFIG_IP_VS_PROTO_AH is not set + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +# CONFIG_IP_VS_SED is not set +# CONFIG_IP_VS_NQ is not set + +# +# IPVS application helper +# +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +# CONFIG_IP_NF_TFTP is not set +# CONFIG_IP_NF_AMANDA is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +# CONFIG_IP_NF_MATCH_IPRANGE is not set +CONFIG_IP_NF_MATCH_MAC=m +# CONFIG_IP_NF_MATCH_PKTTYPE is not set +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_DSCP is not set +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +# CONFIG_IP_NF_MATCH_HELPER is not set +CONFIG_IP_NF_MATCH_STATE=m +# CONFIG_IP_NF_MATCH_CONNTRACK is not set +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_PHYSDEV is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +CONFIG_IP_NF_TARGET_MARK=m +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +# CONFIG_IP_NF_ARP_MANGLE is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +CONFIG_ATM=y +CONFIG_ATM_CLIP=y +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_X25=m +CONFIG_LAPB=m +# CONFIG_NET_DIVERT is not set +CONFIG_ECONET=m +CONFIG_ECONET_AUNUDP=y +CONFIG_ECONET_NATIVE=y +CONFIG_WAN_ROUTER=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_ATM is not set +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_NET_CLS_IND is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_POLICE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -244,6 +494,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP4XX=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -283,7 +534,6 @@ CONFIG_MTD_NAND_IDS=m # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -297,7 +547,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -351,6 +600,7 @@ CONFIG_BLK_DEV_CMD64X=y CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y @@ -369,6 +619,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -379,6 +630,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -391,241 +643,24 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_FWMARK=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -# CONFIG_IP_VS_PROTO_TCP is not set -# CONFIG_IP_VS_PROTO_UDP is not set -# CONFIG_IP_VS_PROTO_ESP is not set -# CONFIG_IP_VS_PROTO_AH is not set - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -# CONFIG_IP_VS_SED is not set -# CONFIG_IP_VS_NQ is not set - -# -# IPVS application helper -# -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration +# Network device support # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -# CONFIG_IP_NF_MATCH_HELPER is not set -CONFIG_IP_NF_MATCH_STATE=m -# CONFIG_IP_NF_MATCH_CONNTRACK is not set -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_PHYSDEV is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -CONFIG_IP_NF_TARGET_MARK=m -# CONFIG_IP_NF_TARGET_CLASSIFY is not set -# CONFIG_IP_NF_RAW is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_ARP_MANGLE is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -CONFIG_ATM=y -CONFIG_ATM_CLIP=y -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -CONFIG_X25=m -CONFIG_LAPB=m -# CONFIG_NET_DIVERT is not set -CONFIG_ECONET=m -CONFIG_ECONET_AUNUDP=y -CONFIG_ECONET_NATIVE=y -CONFIG_WAN_ROUTER=m - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_ATM is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_NETEM is not set -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -# CONFIG_NET_CLS_BASIC is not set -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -635,6 +670,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -671,13 +707,17 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -702,6 +742,7 @@ CONFIG_NET_RADIO=y CONFIG_HERMES=y # CONFIG_PLX_HERMES is not set # CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=y # CONFIG_ATMEL is not set @@ -709,6 +750,7 @@ CONFIG_PCI_HERMES=y # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -758,6 +800,8 @@ CONFIG_ATM_TCP=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -795,7 +839,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -816,6 +859,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -882,12 +926,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_IOP3XX is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP4XX=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -901,14 +944,33 @@ CONFIG_I2C_IXP4XX=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -924,30 +986,26 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -994,6 +1052,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -1004,17 +1063,15 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1034,12 +1091,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1054,8 +1109,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1072,12 +1126,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1086,6 +1142,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1124,6 +1181,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1158,6 +1216,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/trunk/arch/arm/configs/omap_h2_1610_defconfig b/trunk/arch/arm/configs/omap_h2_1610_defconfig index 24955263b096..4198677cd394 100644 --- a/trunk/arch/arm/configs/omap_h2_1610_defconfig +++ b/trunk/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Fri Jul 8 04:49:34 2005 +# Linux kernel version: 2.6.13 +# Mon Sep 5 18:07:12 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -102,9 +102,11 @@ CONFIG_OMAP_MUX_WARNINGS=y # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 +# CONFIG_OMAP_DM_TIMER is not set CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y # # OMAP Core Type @@ -166,7 +168,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_NO_IDLE_HZ=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -230,91 +231,82 @@ CONFIG_PM=y # CONFIG_APM is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) +# Networking # -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set +CONFIG_NET=y # -# User Modules And Translation Layers +# Networking options # -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set # -# RAM/ROM/Flash chip drivers +# SCTP Configuration (EXPERIMENTAL) # -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set # -# Mapping drivers for chip access +# Network testing # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set # -# Self-contained MTD device drivers +# Device Drivers # -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set # -# Disk-On-Chip Device Drivers +# Generic Driver Options # -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # -# NAND Flash Device Drivers +# Memory Technology Devices (MTD) # -# CONFIG_MTD_NAND is not set +# CONFIG_MTD is not set # # Parallel port support @@ -403,72 +395,8 @@ CONFIG_SCSI_PROC_FS=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) +# Network device support # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -518,6 +446,8 @@ CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -615,77 +545,15 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # I2C support # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set +CONFIG_ISP1301_OMAP=y # -# Hardware Sensors Chip support +# Hardware Monitoring support # -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -CONFIG_ISP1301_OMAP=y -CONFIG_TPS65010=y -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -756,15 +624,9 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_TVMIXER is not set # CONFIG_SOUND_AD1980 is not set # @@ -810,6 +672,7 @@ CONFIG_EXT2_FS=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -817,6 +680,7 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -857,15 +721,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=2 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -1007,4 +862,3 @@ CONFIG_CRYPTO_DES=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/trunk/arch/arm/configs/poodle_defconfig b/trunk/arch/arm/configs/poodle_defconfig new file mode 100644 index 000000000000..72822907759f --- /dev/null +++ b/trunk/arch/arm/configs/poodle_defconfig @@ -0,0 +1,1015 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 17:04:29 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +CONFIG_MACH_POODLE=y +# CONFIG_MACH_CORGI is not set +# CONFIG_MACH_SHEPHERD is not set +# CONFIG_MACH_HUSKY is not set +CONFIG_PXA25x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=y +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_PXA=y +# CONFIG_FB_W100 is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/trunk/arch/arm/configs/s3c2410_defconfig b/trunk/arch/arm/configs/s3c2410_defconfig index 96a794d8de84..756348bf5170 100644 --- a/trunk/arch/arm/configs/s3c2410_defconfig +++ b/trunk/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-git4 -# Wed Jun 22 15:56:42 2005 +# Linux kernel version: 2.6.13-git8 +# Thu Sep 8 19:24:02 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -88,7 +90,9 @@ CONFIG_ARCH_S3C2410=y # # S3C24XX Implementations # +CONFIG_MACH_ANUBIS=y CONFIG_ARCH_BAST=y +CONFIG_BAST_PC104_IRQ=y CONFIG_ARCH_H1940=y CONFIG_MACH_N30=y CONFIG_ARCH_SMDK2410=y @@ -112,6 +116,7 @@ CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set +CONFIG_PM_SIMTEC=y CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 # @@ -149,7 +154,15 @@ CONFIG_ISA_DMA_API=y # # CONFIG_SMP is not set # CONFIG_PREEMPT is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_ALIGNMENT_TRAP=y # @@ -185,6 +198,74 @@ CONFIG_BINFMT_AOUT=y CONFIG_PM=y CONFIG_APM=y +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -258,6 +339,7 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_IMPA7 is not set CONFIG_MTD_BAST=y CONFIG_MTD_BAST_MAXSIZE=4 +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -312,7 +394,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -354,6 +435,7 @@ CONFIG_BLK_DEV_IDE_BAST=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -376,76 +458,19 @@ CONFIG_BLK_DEV_IDE_BAST=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options +# Network device support # -# CONFIG_PACKET is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -480,6 +505,8 @@ CONFIG_DM9000=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -562,7 +589,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -605,7 +631,6 @@ CONFIG_S3C2410_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -628,7 +653,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # -# CONFIG_I2C_ISA is not set +CONFIG_I2C_ISA=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y @@ -636,14 +661,33 @@ CONFIG_I2C_S3C2410=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=m +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=m +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +CONFIG_HWMON_VID=m # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -662,27 +706,21 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -# CONFIG_SENSORS_DS1337 is not set -CONFIG_SENSORS_EEPROM=m -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -731,7 +769,7 @@ CONFIG_DUMMY_CONSOLE=y # USB support # CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # @@ -749,6 +787,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -758,6 +797,7 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -765,6 +805,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -791,11 +832,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -812,8 +853,7 @@ CONFIG_JFFS_FS_VERBOSE=0 # CONFIG_JFFS_PROC_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -835,6 +875,7 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -920,6 +961,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/trunk/arch/arm/configs/spitz_defconfig b/trunk/arch/arm/configs/spitz_defconfig new file mode 100644 index 000000000000..900e04f8e38c --- /dev/null +++ b/trunk/arch/arm/configs/spitz_defconfig @@ -0,0 +1,1401 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 17:11:19 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +# CONFIG_PXA_SHARPSL_25x is not set +CONFIG_PXA_SHARPSL_27x=y +CONFIG_MACH_SPITZ=y +CONFIG_MACH_BORZOI=y +CONFIG_PXA27x=y +CONFIG_PXA_SHARP_Cxx00=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +# CONFIG_IP_NF_TARGET_MARK is not set +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_TARGET_NOTRACK is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_BCSP_TXCRC=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_PXA=y +# CONFIG_FB_W100 is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_AIPTEK=m +CONFIG_USB_WACOM=m +# CONFIG_USB_ACECAD is not set +CONFIG_USB_KBTAB=m +CONFIG_USB_POWERMATE=m +CONFIG_USB_MTOUCH=m +# CONFIG_USB_ITMTOUCH is not set +CONFIG_USB_EGALAX=m +# CONFIG_USB_YEALINK is not set +CONFIG_USB_XPAD=m +CONFIG_USB_ATI_REMOTE=m +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_DUMMY_HCD=y +CONFIG_USB_DUMMY_HCD=m +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/trunk/arch/arm/kernel/armksyms.c b/trunk/arch/arm/kernel/armksyms.c index 835d450797a1..7b17a87a3311 100644 --- a/trunk/arch/arm/kernel/armksyms.c +++ b/trunk/arch/arm/kernel/armksyms.c @@ -45,8 +45,8 @@ extern void fp_enter(void); #define EXPORT_SYMBOL_ALIAS(sym,orig) \ EXPORT_CRC_ALIAS(sym) \ - const struct kernel_symbol __ksymtab_##sym \ - __attribute__((section("__ksymtab"))) = \ + static const struct kernel_symbol __ksymtab_##sym \ + __attribute_used__ __attribute__((section("__ksymtab"))) = \ { (unsigned long)&orig, #sym }; /* diff --git a/trunk/arch/arm/kernel/calls.S b/trunk/arch/arm/kernel/calls.S index db07ce42b3b2..2ad4aa2a1536 100644 --- a/trunk/arch/arm/kernel/calls.S +++ b/trunk/arch/arm/kernel/calls.S @@ -10,7 +10,7 @@ * This file is included twice in entry-common.S */ #ifndef NR_syscalls -#define NR_syscalls 320 +#define NR_syscalls 328 #else __syscall_start: @@ -131,7 +131,7 @@ __syscall_start: .long sys_wait4 /* 115 */ .long sys_swapoff .long sys_sysinfo - .long sys_ipc + .long sys_ipc_wrapper .long sys_fsync .long sys_sigreturn_wrapper /* 120 */ .long sys_clone_wrapper @@ -333,6 +333,9 @@ __syscall_start: .long sys_inotify_init .long sys_inotify_add_watch .long sys_inotify_rm_watch + .long sys_mbind_wrapper +/* 320 */ .long sys_get_mempolicy + .long sys_set_mempolicy __syscall_end: .rept NR_syscalls - (__syscall_end - __syscall_start) / 4 diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S index 7152bfbee581..93b5e8e5292e 100644 --- a/trunk/arch/arm/kernel/entry-armv.S +++ b/trunk/arch/arm/kernel/entry-armv.S @@ -537,7 +537,7 @@ ENTRY(__switch_to) #ifdef CONFIG_CPU_MPCORE clrex #else - strex r3, r4, [ip] @ Clear exclusive monitor + strex r5, r4, [ip] @ Clear exclusive monitor #endif #endif #if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT) diff --git a/trunk/arch/arm/kernel/entry-common.S b/trunk/arch/arm/kernel/entry-common.S index 6281d488ac97..066597f4345a 100644 --- a/trunk/arch/arm/kernel/entry-common.S +++ b/trunk/arch/arm/kernel/entry-common.S @@ -106,15 +106,10 @@ ENTRY(ret_from_fork) .endm .Larm700bug: - ldr r0, [sp, #S_PSR] @ Get calling cpsr - sub lr, lr, #4 - str lr, [r8] - msr spsr_cxsf, r0 ldmia sp, {r0 - lr}^ @ Get calling r0 - lr mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC add sp, sp, #S_FRAME_SIZE - movs pc, lr + subs pc, lr, #4 #else .macro arm710_bug_check, instr, temp .endm @@ -269,6 +264,14 @@ sys_arm_fadvise64_64_wrapper: str r5, [sp, #4] @ push r5 to stack b sys_arm_fadvise64_64 +sys_mbind_wrapper: + str r5, [sp, #4] + b sys_mbind + +sys_ipc_wrapper: + str r5, [sp, #4] @ push sixth arg + b sys_ipc + /* * Note: off_4k (r5) is always units of 4K. If we can't do the requested * offset, we return EINVAL. diff --git a/trunk/arch/arm/kernel/entry-header.S b/trunk/arch/arm/kernel/entry-header.S index afef21273963..648cfff93138 100644 --- a/trunk/arch/arm/kernel/entry-header.S +++ b/trunk/arch/arm/kernel/entry-header.S @@ -3,7 +3,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/kernel/head.S b/trunk/arch/arm/kernel/head.S index 1155cf07c871..539626351348 100644 --- a/trunk/arch/arm/kernel/head.S +++ b/trunk/arch/arm/kernel/head.S @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/kernel/io.c b/trunk/arch/arm/kernel/io.c index 6c20c1188b60..1f6822dfae74 100644 --- a/trunk/arch/arm/kernel/io.c +++ b/trunk/arch/arm/kernel/io.c @@ -7,7 +7,7 @@ * Copy data from IO memory space to "real" memory space. * This needs to be optimized. */ -void _memcpy_fromio(void *to, void __iomem *from, size_t count) +void _memcpy_fromio(void *to, const volatile void __iomem *from, size_t count) { unsigned char *t = to; while (count) { @@ -22,7 +22,7 @@ void _memcpy_fromio(void *to, void __iomem *from, size_t count) * Copy data from "real" memory space to IO memory space. * This needs to be optimized. */ -void _memcpy_toio(void __iomem *to, const void *from, size_t count) +void _memcpy_toio(volatile void __iomem *to, const void *from, size_t count) { const unsigned char *f = from; while (count) { @@ -37,7 +37,7 @@ void _memcpy_toio(void __iomem *to, const void *from, size_t count) * "memset" on IO memory space. * This needs to be optimized. */ -void _memset_io(void __iomem *dst, int c, size_t count) +void _memset_io(volatile void __iomem *dst, int c, size_t count) { while (count) { count--; diff --git a/trunk/arch/arm/kernel/iwmmxt.S b/trunk/arch/arm/kernel/iwmmxt.S index 8f74e24536ba..24c7b0477a09 100644 --- a/trunk/arch/arm/kernel/iwmmxt.S +++ b/trunk/arch/arm/kernel/iwmmxt.S @@ -17,7 +17,7 @@ #include #include #include -#include +#include #define MMX_WR0 (0x00) #define MMX_WR1 (0x08) diff --git a/trunk/arch/arm/kernel/semaphore.c b/trunk/arch/arm/kernel/semaphore.c index ac423e3e224b..4c31f2923055 100644 --- a/trunk/arch/arm/kernel/semaphore.c +++ b/trunk/arch/arm/kernel/semaphore.c @@ -178,7 +178,7 @@ int __down_trylock(struct semaphore * sem) * registers (r0 to r3 and lr), but not ip, as we use it as a return * value in some cases.. */ -asm(" .section .sched.text,\"ax\" \n\ +asm(" .section .sched.text,\"ax\",%progbits \n\ .align 5 \n\ .globl __down_failed \n\ __down_failed: \n\ diff --git a/trunk/arch/arm/kernel/sys_arm.c b/trunk/arch/arm/kernel/sys_arm.c index 42629ff84f5a..ea569ba482b1 100644 --- a/trunk/arch/arm/kernel/sys_arm.c +++ b/trunk/arch/arm/kernel/sys_arm.c @@ -305,7 +305,7 @@ long execve(const char *filename, char **argv, char **envp) "Ir" (THREAD_START_SP - sizeof(regs)), "r" (®s), "Ir" (sizeof(regs)) - : "r0", "r1", "r2", "r3", "ip", "memory"); + : "r0", "r1", "r2", "r3", "ip", "lr", "memory"); out: return ret; diff --git a/trunk/arch/arm/kernel/time.c b/trunk/arch/arm/kernel/time.c index 8880482dcbff..69449a818dcc 100644 --- a/trunk/arch/arm/kernel/time.c +++ b/trunk/arch/arm/kernel/time.c @@ -102,7 +102,7 @@ static unsigned long next_rtc_update; */ static inline void do_set_rtc(void) { - if (time_status & STA_UNSYNC || set_rtc == NULL) + if (!ntp_synced() || set_rtc == NULL) return; if (next_rtc_update && @@ -292,10 +292,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/trunk/arch/arm/kernel/traps.c b/trunk/arch/arm/kernel/traps.c index 4554c961251c..f6de76e0a45d 100644 --- a/trunk/arch/arm/kernel/traps.c +++ b/trunk/arch/arm/kernel/traps.c @@ -504,7 +504,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) bad_access: spin_unlock(&mm->page_table_lock); - /* simulate a read access fault */ + /* simulate a write access fault */ do_DataAbort(addr, 15 + (1 << 11), regs); return -1; } @@ -624,6 +624,9 @@ void __attribute__((noreturn)) __bug(const char *file, int line, void *data) printk(" - extra data = %p", data); printk("\n"); *(int *)0 = 0; + + /* Avoid "noreturn function does return" */ + for (;;); } EXPORT_SYMBOL(__bug); diff --git a/trunk/arch/arm/kernel/vmlinux.lds.S b/trunk/arch/arm/kernel/vmlinux.lds.S index ad2d66c93a5c..0d5db5279c5c 100644 --- a/trunk/arch/arm/kernel/vmlinux.lds.S +++ b/trunk/arch/arm/kernel/vmlinux.lds.S @@ -23,20 +23,20 @@ SECTIONS *(.init.text) _einittext = .; __proc_info_begin = .; - *(.proc.info) + *(.proc.info.init) __proc_info_end = .; __arch_info_begin = .; - *(.arch.info) + *(.arch.info.init) __arch_info_end = .; __tagtable_begin = .; - *(.taglist) + *(.taglist.init) __tagtable_end = .; . = ALIGN(16); __setup_start = .; *(.init.setup) __setup_end = .; __early_begin = .; - *(__early_param) + *(.early_param.init) __early_end = .; __initcall_start = .; *(.initcall1.init) @@ -89,13 +89,6 @@ SECTIONS *(.got) /* Global offset table */ } - . = ALIGN(16); - __ex_table : { /* Exception table */ - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } - RODATA _etext = .; /* End of text and rodata section */ @@ -137,6 +130,14 @@ SECTIONS . = ALIGN(32); *(.data.cacheline_aligned) + /* + * The exception fixup table (might need resorting at runtime) + */ + . = ALIGN(32); + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + /* * and the usual data section */ diff --git a/trunk/arch/arm/lib/copy_page.S b/trunk/arch/arm/lib/copy_page.S index 4c38abdbe497..68117968482b 100644 --- a/trunk/arch/arm/lib/copy_page.S +++ b/trunk/arch/arm/lib/copy_page.S @@ -11,7 +11,7 @@ */ #include #include -#include +#include #define COPY_COUNT (PAGE_SZ/64 PLD( -1 )) diff --git a/trunk/arch/arm/lib/csumpartialcopyuser.S b/trunk/arch/arm/lib/csumpartialcopyuser.S index 46a2dc962e9d..333bca292de9 100644 --- a/trunk/arch/arm/lib/csumpartialcopyuser.S +++ b/trunk/arch/arm/lib/csumpartialcopyuser.S @@ -13,7 +13,7 @@ #include #include #include -#include +#include .text diff --git a/trunk/arch/arm/lib/getuser.S b/trunk/arch/arm/lib/getuser.S index 64aa6f4fe5e4..d204018070a4 100644 --- a/trunk/arch/arm/lib/getuser.S +++ b/trunk/arch/arm/lib/getuser.S @@ -26,7 +26,7 @@ * Note that ADDR_LIMIT is either 0 or 0xc0000000. * Note also that it is intended that __get_user_bad is not global. */ -#include +#include #include #include diff --git a/trunk/arch/arm/lib/putuser.S b/trunk/arch/arm/lib/putuser.S index b09398d95aac..4593e9c07f05 100644 --- a/trunk/arch/arm/lib/putuser.S +++ b/trunk/arch/arm/lib/putuser.S @@ -26,7 +26,7 @@ * Note that ADDR_LIMIT is either 0 or 0xc0000000 * Note also that it is intended that __put_user_bad is not global. */ -#include +#include #include #include diff --git a/trunk/arch/arm/mach-clps711x/fortunet.c b/trunk/arch/arm/mach-clps711x/fortunet.c index f83a59761e02..3d88da0c287b 100644 --- a/trunk/arch/arm/mach-clps711x/fortunet.c +++ b/trunk/arch/arm/mach-clps711x/fortunet.c @@ -31,6 +31,8 @@ #include +#include + #include "common.h" struct meminfo memmap = { diff --git a/trunk/arch/arm/mach-clps7500/core.c b/trunk/arch/arm/mach-clps7500/core.c index 112f1d68fb2b..e216ab8b9e8f 100644 --- a/trunk/arch/arm/mach-clps7500/core.c +++ b/trunk/arch/arm/mach-clps7500/core.c @@ -354,7 +354,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/trunk/arch/arm/mach-ebsa110/core.c b/trunk/arch/arm/mach-ebsa110/core.c index 23c4da10101b..5aeadfd72143 100644 --- a/trunk/arch/arm/mach-ebsa110/core.c +++ b/trunk/arch/arm/mach-ebsa110/core.c @@ -219,7 +219,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/trunk/arch/arm/mach-epxa10db/arch.c b/trunk/arch/arm/mach-epxa10db/arch.c index 7daa021676d0..44c56571d183 100644 --- a/trunk/arch/arm/mach-epxa10db/arch.c +++ b/trunk/arch/arm/mach-epxa10db/arch.c @@ -52,7 +52,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/trunk/arch/arm/mach-footbridge/Kconfig b/trunk/arch/arm/mach-footbridge/Kconfig index 324d9edeec38..bdd257921cfb 100644 --- a/trunk/arch/arm/mach-footbridge/Kconfig +++ b/trunk/arch/arm/mach-footbridge/Kconfig @@ -87,6 +87,7 @@ config FOOTBRIDGE_ADDIN # EBSA285 board in either host or addin mode config ARCH_EBSA285 + select ARCH_MAY_HAVE_PC_FDC bool endif diff --git a/trunk/arch/arm/mach-footbridge/isa.c b/trunk/arch/arm/mach-footbridge/isa.c index aa3a1fef563e..28846c7edaaf 100644 --- a/trunk/arch/arm/mach-footbridge/isa.c +++ b/trunk/arch/arm/mach-footbridge/isa.c @@ -34,7 +34,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/trunk/arch/arm/mach-h720x/cpu-h7202.c b/trunk/arch/arm/mach-h720x/cpu-h7202.c index 4b3199319e68..a4a7c0125d03 100644 --- a/trunk/arch/arm/mach-h720x/cpu-h7202.c +++ b/trunk/arch/arm/mach-h720x/cpu-h7202.c @@ -90,7 +90,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/trunk/arch/arm/mach-imx/generic.c b/trunk/arch/arm/mach-imx/generic.c index 41e5849ae8da..f8a742bb2d5b 100644 --- a/trunk/arch/arm/mach-imx/generic.c +++ b/trunk/arch/arm/mach-imx/generic.c @@ -28,14 +28,15 @@ #include #include #include +#include #include void imx_gpio_mode(int gpio_mode) { unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; unsigned int tmp; /* Pullup enable */ @@ -57,7 +58,7 @@ void imx_gpio_mode(int gpio_mode) GPR(port) &= ~(1<> GPIO_AOUT_SHIFT) & 3) << (pin * 2); + ICONFB1(port) &= ~( 3<<(pin*2)); + ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); } else { tmp = OCR2(port); tmp &= ~( 3<<((pin-16)*2)); tmp |= (ocr << ((pin-16)*2)); OCR2(port) = tmp; - if( gpio_mode & GPIO_AOUT ) - ICONFA2(port) &= ~( 3<<((pin-16)*2)); - if( gpio_mode & GPIO_BOUT ) - ICONFB2(port) &= ~( 3<<((pin-16)*2)); + ICONFA2(port) &= ~( 3<<((pin-16)*2)); + ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2); + ICONFB2(port) &= ~( 3<<((pin-16)*2)); + ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2); } } diff --git a/trunk/arch/arm/mach-imx/leds-mx1ads.c b/trunk/arch/arm/mach-imx/leds-mx1ads.c index e6399b06e4a4..79236404aec2 100644 --- a/trunk/arch/arm/mach-imx/leds-mx1ads.c +++ b/trunk/arch/arm/mach-imx/leds-mx1ads.c @@ -17,7 +17,6 @@ #include #include #include -#include #include "leds.h" /* diff --git a/trunk/arch/arm/mach-imx/mx1ads.c b/trunk/arch/arm/mach-imx/mx1ads.c index 5d25434d332c..a7511ddfe364 100644 --- a/trunk/arch/arm/mach-imx/mx1ads.c +++ b/trunk/arch/arm/mach-imx/mx1ads.c @@ -55,7 +55,7 @@ static void __init mx1ads_init(void) { #ifdef CONFIG_LEDS - imx_gpio_mode(GPIO_PORTA | GPIO_OUT | GPIO_GPIO | 2); + imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); #endif platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/trunk/arch/arm/mach-iop3xx/common.c b/trunk/arch/arm/mach-iop3xx/common.c index bda7394ec06c..fdeeef489a73 100644 --- a/trunk/arch/arm/mach-iop3xx/common.c +++ b/trunk/arch/arm/mach-iop3xx/common.c @@ -27,7 +27,6 @@ unsigned long iop3xx_pcibios_min_mem = 0; /* * Default power-off for EP80219 */ -#include static inline void ep80219_send_to_pic(__u8 c) { } diff --git a/trunk/arch/arm/mach-iop3xx/iop321-time.c b/trunk/arch/arm/mach-iop3xx/iop321-time.c index d53af1669502..d67ac0e5d438 100644 --- a/trunk/arch/arm/mach-iop3xx/iop321-time.c +++ b/trunk/arch/arm/mach-iop3xx/iop321-time.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include @@ -60,7 +59,7 @@ static unsigned long iop321_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } diff --git a/trunk/arch/arm/mach-iop3xx/iop331-time.c b/trunk/arch/arm/mach-iop3xx/iop331-time.c index 1a6d9d661e4b..3c1f0ebbd636 100644 --- a/trunk/arch/arm/mach-iop3xx/iop331-time.c +++ b/trunk/arch/arm/mach-iop3xx/iop331-time.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include @@ -58,7 +57,7 @@ static unsigned long iop331_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } diff --git a/trunk/arch/arm/mach-iop3xx/iq31244-mm.c b/trunk/arch/arm/mach-iop3xx/iq31244-mm.c index b01042f7de71..55992ab586ba 100644 --- a/trunk/arch/arm/mach-iop3xx/iq31244-mm.c +++ b/trunk/arch/arm/mach-iop3xx/iq31244-mm.c @@ -21,7 +21,6 @@ #include #include -#include /* diff --git a/trunk/arch/arm/mach-iop3xx/iq80321-mm.c b/trunk/arch/arm/mach-iop3xx/iq80321-mm.c index 1580c7ed2b9d..bb3e9e5a9aff 100644 --- a/trunk/arch/arm/mach-iop3xx/iq80321-mm.c +++ b/trunk/arch/arm/mach-iop3xx/iq80321-mm.c @@ -21,7 +21,6 @@ #include #include -#include /* diff --git a/trunk/arch/arm/mach-iop3xx/iq80331-mm.c b/trunk/arch/arm/mach-iop3xx/iq80331-mm.c index ee8c333e115f..129eb49b0670 100644 --- a/trunk/arch/arm/mach-iop3xx/iq80331-mm.c +++ b/trunk/arch/arm/mach-iop3xx/iq80331-mm.c @@ -21,7 +21,6 @@ #include #include -#include /* diff --git a/trunk/arch/arm/mach-iop3xx/iq80332-mm.c b/trunk/arch/arm/mach-iop3xx/iq80332-mm.c index 084afcdfb1eb..2feaf7591f53 100644 --- a/trunk/arch/arm/mach-iop3xx/iq80332-mm.c +++ b/trunk/arch/arm/mach-iop3xx/iq80332-mm.c @@ -21,7 +21,6 @@ #include #include -#include /* diff --git a/trunk/arch/arm/mach-ixp2000/core.c b/trunk/arch/arm/mach-ixp2000/core.c index 781d10ae00b7..f4d7f1f6ef85 100644 --- a/trunk/arch/arm/mach-ixp2000/core.c +++ b/trunk/arch/arm/mach-ixp2000/core.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -168,13 +167,13 @@ static struct plat_serial8250_port ixp2000_serial_port[] = { static struct resource ixp2000_uart_resource = { .start = IXP2000_UART_PHYS_BASE, - .end = IXP2000_UART_PHYS_BASE + 0xffff, + .end = IXP2000_UART_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }; static struct platform_device ixp2000_serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = ixp2000_serial_port, }, @@ -382,7 +381,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) static struct irqchip ixp2000_GPIO_irq_chip = { .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, - .unmask = ixp2000_GPIO_irq_unmask + .unmask = ixp2000_GPIO_irq_unmask, .set_type = ixp2000_GPIO_irq_type, }; diff --git a/trunk/arch/arm/mach-ixp2000/pci.c b/trunk/arch/arm/mach-ixp2000/pci.c index 0788fb2b5c10..522205acb316 100644 --- a/trunk/arch/arm/mach-ixp2000/pci.c +++ b/trunk/arch/arm/mach-ixp2000/pci.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-ixp4xx/common.c b/trunk/arch/arm/mach-ixp4xx/common.c index 0422e906cc9a..36b6045213ee 100644 --- a/trunk/arch/arm/mach-ixp4xx/common.c +++ b/trunk/arch/arm/mach-ixp4xx/common.c @@ -125,7 +125,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) } else if (type & IRQT_LOW) { int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP4XX_IRQ_LEVEL; - } + } else + return -EINVAL; ixp4xx_config_irq(irq, irq_type); @@ -142,6 +143,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) /* Set the new style */ *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); + + return 0; } static void ixp4xx_irq_mask(unsigned int irq) @@ -179,17 +182,17 @@ static void ixp4xx_irq_level_unmask(unsigned int irq) } static struct irqchip ixp4xx_irq_level_chip = { - .ack = ixp4xx_irq_mask, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_level_unmask, - .type = ixp4xx_set_irq_type + .ack = ixp4xx_irq_mask, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_level_unmask, + .set_type = ixp4xx_set_irq_type, }; static struct irqchip ixp4xx_irq_edge_chip = { - .ack = ixp4xx_irq_ack, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_unmask, - .type = ixp4xx_set_irq_type + .ack = ixp4xx_irq_ack, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_unmask, + .set_type = ixp4xx_set_irq_type, }; static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type) diff --git a/trunk/arch/arm/mach-ixp4xx/coyote-setup.c b/trunk/arch/arm/mach-ixp4xx/coyote-setup.c index 8b2f25322452..050c92768913 100644 --- a/trunk/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/trunk/arch/arm/mach-ixp4xx/coyote-setup.c @@ -66,7 +66,7 @@ static struct plat_serial8250_port coyote_uart_data[] = { static struct platform_device coyote_uart = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = coyote_uart_data, }, diff --git a/trunk/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/trunk/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 3fd92c5cbaa8..29a6d02fa851 100644 --- a/trunk/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/trunk/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -93,7 +93,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = { static struct platform_device gtwx5715_uart_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = gtwx5715_uart_platform_data, }, diff --git a/trunk/arch/arm/mach-ixp4xx/ixdp425-setup.c b/trunk/arch/arm/mach-ixp4xx/ixdp425-setup.c index 6c14ff3c23a0..0a41080d2266 100644 --- a/trunk/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/trunk/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -96,7 +96,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { static struct platform_device ixdp425_uart = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = ixdp425_uart_data, .num_resources = 2, .resource = ixdp425_uart_resources @@ -123,6 +123,7 @@ static void __init ixdp425_init(void) platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices)); } +#ifdef CONFIG_ARCH_IXDP425 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -134,7 +135,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif +#ifdef CONFIG_MACH_IXDP465 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -146,7 +149,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif +#ifdef CONFIG_ARCH_PRPMC1100 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -158,6 +163,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif /* * Avila is functionally equivalent to IXDP425 except that it adds diff --git a/trunk/arch/arm/mach-l7200/core.c b/trunk/arch/arm/mach-l7200/core.c index 2a7fee2a7635..03ed742ae2be 100644 --- a/trunk/arch/arm/mach-l7200/core.c +++ b/trunk/arch/arm/mach-l7200/core.c @@ -7,12 +7,17 @@ */ #include #include +#include +#include +#include +#include #include #include +#include #include -#include +#include /* * IRQ base register @@ -48,6 +53,12 @@ static void l7200_unmask_irq(unsigned int irq) { IRQ_ENABLE = 1 << irq; } + +static struct irqchip l7200_irq_chip = { + .ack = l7200_mask_irq, + .mask = l7200_mask_irq, + .unmask = l7200_unmask_irq +}; static void __init l7200_init_irq(void) { @@ -57,11 +68,9 @@ static void __init l7200_init_irq(void) FIQ_ENABLECLEAR = 0xffffffff; /* clear all fast interrupt enables */ for (irq = 0; irq < NR_IRQS; irq++) { - irq_desc[irq].valid = 1; - irq_desc[irq].probe_ok = 1; - irq_desc[irq].mask_ack = l7200_mask_irq; - irq_desc[irq].mask = l7200_mask_irq; - irq_desc[irq].unmask = l7200_unmask_irq; + set_irq_chip(irq, &l7200_irq_chip); + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); } init_FIQ(); diff --git a/trunk/arch/arm/mach-omap1/Kconfig b/trunk/arch/arm/mach-omap1/Kconfig index 7408ac94f771..27fc2e8e5fca 100644 --- a/trunk/arch/arm/mach-omap1/Kconfig +++ b/trunk/arch/arm/mach-omap1/Kconfig @@ -47,6 +47,14 @@ config MACH_OMAP_OSK TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. +config OMAP_OSK_MISTRAL + bool "Mistral QVGA board Support" + depends on MACH_OMAP_OSK + help + The OSK supports an optional add-on board with a Quarter-VGA + touchscreen, PDA-ish buttons, a resume button, bicolor LED, + and camera connector. Say Y here if you have this board. + config MACH_OMAP_PERSEUS2 bool "TI Perseus2" depends on ARCH_OMAP1 && ARCH_OMAP730 diff --git a/trunk/arch/arm/mach-omap1/Makefile b/trunk/arch/arm/mach-omap1/Makefile index d386fd913f0c..181a93deaaee 100644 --- a/trunk/arch/arm/mach-omap1/Makefile +++ b/trunk/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o irq.o time.o serial.o +obj-y := io.o id.o irq.o time.o serial.o devices.o led-y := leds.o # Specific board support @@ -23,6 +23,7 @@ endif # LEDs support led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o +led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o diff --git a/trunk/arch/arm/mach-omap1/board-generic.c b/trunk/arch/arm/mach-omap1/board-generic.c index 122796ebe8f5..c209c7172a9a 100644 --- a/trunk/arch/arm/mach-omap1/board-generic.c +++ b/trunk/arch/arm/mach-omap1/board-generic.c @@ -48,19 +48,43 @@ static struct omap_usb_config generic1510_usb_config __initdata = { #if defined(CONFIG_ARCH_OMAP16XX) static struct omap_usb_config generic1610_usb_config __initdata = { +#ifdef CONFIG_USB_OTG + .otg = 1, +#endif .register_host = 1, .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, }; + +static struct omap_mmc_config generic_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, + .mmc [1] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + #endif static struct omap_board_config_kernel generic_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_MMC, &generic_mmc_config }, }; static void __init omap_generic_init(void) { + const struct omap_uart_config *uart_conf; + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on @@ -76,6 +100,18 @@ static void __init omap_generic_init(void) generic_config[0].data = &generic1610_usb_config; } #endif + + uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + if (uart_conf != NULL) { + unsigned int enabled_ports, i; + + enabled_ports = uart_conf->enabled_uarts; + for (i = 0; i < 3; i++) { + if (!(enabled_ports & (1 << i))) + generic_serial_ports[i] = 0; + } + } + omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(generic_serial_ports); @@ -83,7 +119,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io() + omap_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") diff --git a/trunk/arch/arm/mach-omap1/board-h2.c b/trunk/arch/arm/mach-omap1/board-h2.c index f4983ee95ab4..d46a70063b0c 100644 --- a/trunk/arch/arm/mach-omap1/board-h2.c +++ b/trunk/arch/arm/mach-omap1/board-h2.c @@ -33,6 +33,7 @@ #include #include +#include #include #include #include @@ -80,8 +81,7 @@ static struct flash_platform_data h2_flash_data = { }; static struct resource h2_flash_resource = { - .start = OMAP_CS2B_PHYS, - .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1, + /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; @@ -126,10 +126,9 @@ static void __init h2_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE); } -void h2_init_irq(void) +static void __init h2_init_irq(void) { omap_init_irq(); omap_gpio_init(); @@ -152,9 +151,13 @@ static struct omap_usb_config h2_usb_config __initdata = { }; static struct omap_mmc_config h2_mmc_config __initdata = { - .mmc_blocks = 1, - .mmc1_power_pin = -1, /* tps65010 gpio3 */ - .mmc1_switch_pin = OMAP_MPUIO(1), + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, /* tps65010 gpio3 */ + .switch_pin = OMAP_MPUIO(1), + }, }; static struct omap_board_config_kernel h2_config[] = { @@ -164,6 +167,16 @@ static struct omap_board_config_kernel h2_config[] = { static void __init h2_init(void) { + /* NOTE: revC boards support NAND-boot, which can put NOR on CS2B + * and NAND (either 16bit or 8bit) on CS3. + */ + h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys(); + h2_flash_resource.end += SZ_32M - 1; + + /* MMC: card detect and WP */ + // omap_cfg_reg(U19_ARMIO1); /* CD */ + omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ + platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); diff --git a/trunk/arch/arm/mach-omap1/board-h3.c b/trunk/arch/arm/mach-omap1/board-h3.c index 7cd419d61b40..2798613696fa 100644 --- a/trunk/arch/arm/mach-omap1/board-h3.c +++ b/trunk/arch/arm/mach-omap1/board-h3.c @@ -82,8 +82,7 @@ static struct flash_platform_data h3_flash_data = { }; static struct resource h3_flash_resource = { - .start = OMAP_CS2B_PHYS, - .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1, + /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; @@ -161,13 +160,26 @@ static struct omap_usb_config h3_usb_config __initdata = { .pins[1] = 3, }; +static struct omap_mmc_config h3_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .power_pin = -1, /* tps65010 GPIO4 */ + .switch_pin = OMAP_MPUIO(1), + }, +}; + static struct omap_board_config_kernel h3_config[] = { { OMAP_TAG_USB, &h3_usb_config }, + { OMAP_TAG_MMC, &h3_mmc_config }, }; static void __init h3_init(void) { + h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys(); + h3_flash_resource.end += OMAP_CS3_SIZE - 1; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + omap_board_config = h3_config; + omap_board_config_size = ARRAY_SIZE(h3_config); } static void __init h3_init_smc91x(void) @@ -177,7 +189,6 @@ static void __init h3_init_smc91x(void) printk("Error requesting gpio 40 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE); } void h3_init_irq(void) diff --git a/trunk/arch/arm/mach-omap1/board-innovator.c b/trunk/arch/arm/mach-omap1/board-innovator.c index 91de60a91ef8..df0312b596e4 100644 --- a/trunk/arch/arm/mach-omap1/board-innovator.c +++ b/trunk/arch/arm/mach-omap1/board-innovator.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -173,7 +174,6 @@ static void __init innovator_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE); } } @@ -220,8 +220,19 @@ static struct omap_usb_config h2_usb_config __initdata = { }; #endif +static struct omap_mmc_config innovator_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, /* FPGA F3 UIO42 */ + .switch_pin = -1, /* FPGA F4 UIO43 */ + }, +}; + static struct omap_board_config_kernel innovator_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_MMC, &innovator_mmc_config }, }; static void __init innovator_init(void) diff --git a/trunk/arch/arm/mach-omap1/board-netstar.c b/trunk/arch/arm/mach-omap1/board-netstar.c index 6750b2014092..d904e643f5ec 100644 --- a/trunk/arch/arm/mach-omap1/board-netstar.c +++ b/trunk/arch/arm/mach-omap1/board-netstar.c @@ -75,16 +75,15 @@ static void __init netstar_init(void) mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); - omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); omap_request_gpio(12); omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - omap_set_gpio_edge_ctrl(12, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(14, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(15, OMAP_GPIO_FALLING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING); platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices)); diff --git a/trunk/arch/arm/mach-omap1/board-osk.c b/trunk/arch/arm/mach-omap1/board-osk.c index 6844e536c698..21103df50415 100644 --- a/trunk/arch/arm/mach-omap1/board-osk.c +++ b/trunk/arch/arm/mach-omap1/board-osk.c @@ -29,11 +29,16 @@ #include #include #include +#include + +#include +#include #include #include #include #include +#include #include #include @@ -41,12 +46,56 @@ #include #include -static struct map_desc osk5912_io_desc[] __initdata = { -{ OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE, - MT_DEVICE }, +static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; + +static struct mtd_partition osk_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } }; -static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; +static struct flash_platform_data osk_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = osk_partitions, + .nr_parts = ARRAY_SIZE(osk_partitions), +}; + +static struct resource osk_flash_resource = { + /* this is on CS3, wherever it's mapped */ + .flags = IORESOURCE_MEM, +}; + +static struct platform_device osk5912_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &osk_flash_data, + }, + .num_resources = 1, + .resource = &osk_flash_resource, +}; static struct resource osk5912_smc91x_resources[] = { [0] = { @@ -86,9 +135,16 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; +static struct platform_device osk5912_mcbsp1_device = { + .name = "omap_mcbsp", + .id = 1, +}; + static struct platform_device *osk5912_devices[] __initdata = { + &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, + &osk5912_mcbsp1_device, }; static void __init osk_init_smc91x(void) @@ -97,7 +153,6 @@ static void __init osk_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE); /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ EMIFS_CCS(1) |= 0x2; @@ -110,11 +165,11 @@ static void __init osk_init_cf(void) printk("Error requesting gpio 62 for CF irq\n"); return; } - /* it's really active-low */ - omap_set_gpio_edge_ctrl(62, OMAP_GPIO_FALLING_EDGE); + /* the CF I/O IRQ is really active-low */ + set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); } -void osk_init_irq(void) +static void __init osk_init_irq(void) { omap_init_irq(); omap_gpio_init(); @@ -142,18 +197,69 @@ static struct omap_board_config_kernel osk_config[] = { { OMAP_TAG_USB, &osk_usb_config }, }; +#ifdef CONFIG_OMAP_OSK_MISTRAL + +#ifdef CONFIG_PM +static irqreturn_t +osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} +#endif + +static void __init osk_mistral_init(void) +{ + /* FIXME here's where to feed in framebuffer, touchpad, and + * keyboard setup ... not in the drivers for those devices! + * + * NOTE: we could actually tell if there's a Mistral board + * attached, e.g. by trying to read something from the ads7846. + * But this is too early for that... + */ + + /* the sideways button (SW1) is for use as a "wakeup" button */ + omap_cfg_reg(N15_1610_MPUIO2); + if (omap_request_gpio(OMAP_MPUIO(2)) == 0) { + int ret = 0; + omap_set_gpio_direction(OMAP_MPUIO(2), 1); + set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); +#ifdef CONFIG_PM + /* share the IRQ in case someone wants to use the + * button for more than wakeup from system sleep. + */ + ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), + &osk_mistral_wake_interrupt, + SA_SHIRQ, "mistral_wakeup", + &osk_mistral_wake_interrupt); + if (ret != 0) { + omap_free_gpio(OMAP_MPUIO(2)); + printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", + ret); + } else + enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2))); +#endif + } else + printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); +} +#else +static void __init osk_mistral_init(void) { } +#endif + static void __init osk_init(void) { + osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); + osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); omap_board_config = osk_config; omap_board_config_size = ARRAY_SIZE(osk_config); USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + + osk_mistral_init(); } static void __init osk_map_io(void) { omap_map_common_io(); - iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc)); omap_serial_init(osk_serial_ports); } diff --git a/trunk/arch/arm/mach-omap1/board-perseus2.c b/trunk/arch/arm/mach-omap1/board-perseus2.c index 213317392d9b..107c68c8ab54 100644 --- a/trunk/arch/arm/mach-omap1/board-perseus2.c +++ b/trunk/arch/arm/mach-omap1/board-perseus2.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -83,8 +84,8 @@ static struct flash_platform_data p2_flash_data = { }; static struct resource p2_flash_resource = { - .start = OMAP_FLASH_0_START, - .end = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1, + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; diff --git a/trunk/arch/arm/mach-omap1/board-voiceblue.c b/trunk/arch/arm/mach-omap1/board-voiceblue.c index e42281988990..bf30b1acda0b 100644 --- a/trunk/arch/arm/mach-omap1/board-voiceblue.c +++ b/trunk/arch/arm/mach-omap1/board-voiceblue.c @@ -25,13 +25,14 @@ #include #include #include +#include #include +#include #include -#include #include +#include #include -#include extern void omap_init_time(void); extern int omap_gpio_init(void); @@ -74,7 +75,7 @@ static struct plat_serial8250_port voiceblue_ports[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 1, + .id = PLAT8250_DEV_PLATFORM1, .dev = { .platform_data = voiceblue_ports, }, @@ -86,6 +87,27 @@ static int __init ext_uart_init(void) } arch_initcall(ext_uart_init); +static struct flash_platform_data voiceblue_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource voiceblue_flash_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device voiceblue_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &voiceblue_flash_data, + }, + .num_resources = 1, + .resource = &voiceblue_flash_resource, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -107,6 +129,7 @@ static struct platform_device voiceblue_smc91x_device = { }; static struct platform_device *voiceblue_devices[] __initdata = { + &voiceblue_flash_device, &voiceblue_smc91x_device, }; @@ -119,8 +142,17 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; +static struct omap_mmc_config voiceblue_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .power_pin = 2, + .switch_pin = -1, + }, +}; + static struct omap_board_config_kernel voiceblue_config[] = { { OMAP_TAG_USB, &voiceblue_usb_config }, + { OMAP_TAG_MMC, &voiceblue_mmc_config }, }; static void __init voiceblue_init_irq(void) @@ -131,9 +163,6 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { - /* There is a good chance board is going up, so enable Power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); /* Watchdog */ omap_request_gpio(0); /* smc91x reset */ @@ -145,7 +174,6 @@ static void __init voiceblue_init(void) mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); - omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); /* 16C554 reset*/ omap_request_gpio(6); omap_set_gpio_direction(6, 0); @@ -155,14 +183,19 @@ static void __init voiceblue_init(void) omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); + + /* There is a good chance board is going up, so enable power LED + * (it is connected through invertor) */ + omap_writeb(0x00, OMAP_LPG1_LCR); + omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ } static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; @@ -184,9 +217,9 @@ static int panic_event(struct notifier_block *this, unsigned long event, if (test_and_set_bit(MACHINE_PANICED, &machine_state)) return NOTIFY_DONE; - /* Flash Power LED - * (TODO: Enable clock right way (enabled in bootloader already)) */ + /* Flash power LED */ omap_writeb(0x78, OMAP_LPG1_LCR); + omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */ return NOTIFY_DONE; } @@ -195,15 +228,14 @@ static struct notifier_block panic_block = { .notifier_call = panic_event, }; -static int __init setup_notifier(void) +static int __init voiceblue_setup(void) { /* Setup panic notifier */ notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } - -postcore_initcall(setup_notifier); +postcore_initcall(voiceblue_setup); static int wdt_gpio_state; diff --git a/trunk/arch/arm/mach-omap1/devices.c b/trunk/arch/arm/mach-omap1/devices.c new file mode 100644 index 000000000000..e8b3981444cd --- /dev/null +++ b/trunk/arch/arm/mach-omap1/devices.c @@ -0,0 +1,351 @@ +/* + * linux/arch/arm/mach-omap1/devices.c + * + * OMAP1 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + + +static void omap_nop_release(struct device *dev) +{ + /* Nothing */ +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP_I2C_BASE 0xfffb3800 + +static struct resource i2c_resources[] = { + { + .start = OMAP_I2C_BASE, + .end = OMAP_I2C_BASE + 0x3f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +/* DMA not used; works around erratum writing to non-empty i2c fifo */ + +static struct platform_device omap_i2c_device = { + .name = "i2c_omap", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static void omap_init_i2c(void) +{ + /* FIXME define and use a boot tag, in case of boards that + * either don't wire up I2C, or chips that mux it differently... + * it can include clocking and address info, maybe more. + */ + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + + (void) platform_device_register(&omap_i2c_device); +} +#else +static inline void omap_init_i2c(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE) + +static u64 irda_dmamask = 0xffffffff; + +static struct platform_device omap1610ir_device = { + .name = "omap1610-ir", + .id = -1, + .dev = { + .release = omap_nop_release, + .dma_mask = &irda_dmamask, + }, +}; + +static void omap_init_irda(void) +{ + /* FIXME define and use a boot tag, members something like: + * u8 uart; // uart1, or uart3 + * ... but driver only handles uart3 for now + * s16 fir_sel; // gpio for SIR vs FIR + * ... may prefer a callback for SIR/MIR/FIR mode select; + * while h2 uses a GPIO, H3 uses a gpio expander + */ + if (machine_is_omap_h2() + || machine_is_omap_h3()) + (void) platform_device_register(&omap1610ir_device); +} +#else +static inline void omap_init_irda(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +#define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +static struct omap_mmc_conf mmc1_conf; + +static u64 mmc1_dmamask = 0xffffffff; + +static struct resource mmc1_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC1_BASE), + .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_MMC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device1 = { + .name = "mmci-omap", + .id = 1, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc1_dmamask, + .platform_data = &mmc1_conf, + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources, +}; + +#ifdef CONFIG_ARCH_OMAP16XX + +static struct omap_mmc_conf mmc2_conf; + +static u64 mmc2_dmamask = 0xffffffff; + +static struct resource mmc2_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC2_BASE), + .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_MMC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device2 = { + .name = "mmci-omap", + .id = 2, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc2_dmamask, + .platform_data = &mmc2_conf, + }, + .num_resources = ARRAY_SIZE(mmc2_resources), + .resource = mmc2_resources, +}; +#endif + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + const struct omap_mmc_conf *mmc; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + /* block 1 is always available and has just one pinout option */ + mmc = &mmc_conf->mmc[0]; + if (mmc->enabled) { + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); + if (cpu_is_omap1710()) { + omap_cfg_reg(M15_1710_MMC_CLKI); + omap_cfg_reg(P19_1710_MMC_CMDDIR); + omap_cfg_reg(P20_1710_MMC_DATDIR0); + } + if (mmc->wire4) { + omap_cfg_reg(MMC_DAT1); + /* NOTE: DAT2 can be on W10 (here) or M15 */ + if (!mmc->nomux) + omap_cfg_reg(MMC_DAT2); + omap_cfg_reg(MMC_DAT3); + } + mmc1_conf = *mmc; + (void) platform_device_register(&mmc_omap_device1); + } + +#ifdef CONFIG_ARCH_OMAP16XX + /* block 2 is on newer chips, and has many pinout options */ + mmc = &mmc_conf->mmc[1]; + if (mmc->enabled) { + if (!mmc->nomux) { + omap_cfg_reg(Y8_1610_MMC2_CMD); + omap_cfg_reg(Y10_1610_MMC2_CLK); + omap_cfg_reg(R18_1610_MMC2_CLKIN); + omap_cfg_reg(W8_1610_MMC2_DAT0); + if (mmc->wire4) { + omap_cfg_reg(V8_1610_MMC2_DAT1); + omap_cfg_reg(W15_1610_MMC2_DAT2); + omap_cfg_reg(R10_1610_MMC2_DAT3); + } + + /* These are needed for the level shifter */ + omap_cfg_reg(V9_1610_MMC2_CMDDIR); + omap_cfg_reg(V5_1610_MMC2_DATDIR0); + omap_cfg_reg(W19_1610_MMC2_DATDIR1); + } + + /* Feedback clock must be set on OMAP-1710 MMC2 */ + if (cpu_is_omap1710()) + omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), + MOD_CONF_CTRL_1); + mmc2_conf = *mmc; + (void) platform_device_register(&mmc_omap_device2); + } +#endif + return; +} +#else +static inline void omap_init_mmc(void) {} +#endif + +#if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC) + +#define OMAP_RTC_BASE 0xfffb4800 + +static struct resource rtc_resources[] = { + { + .start = OMAP_RTC_BASE, + .end = OMAP_RTC_BASE + 0x5f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_RTC_TIMER, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap_rtc_device = { + .name = "omap_rtc", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static void omap_init_rtc(void) +{ + (void) platform_device_register(&omap_rtc_device); +} +#else +static inline void omap_init_rtc(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE) + +#define OMAP_WDT_BASE 0xfffeb000 + +static struct resource wdt_resources[] = { + { + .start = OMAP_WDT_BASE, + .end = OMAP_WDT_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap1610_wdt", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void omap_init_wdt(void) +{ + (void) platform_device_register(&omap_wdt_device); +} +#else +static inline void omap_init_wdt(void) {} +#endif + + +/*-------------------------------------------------------------------------*/ + +/* + * This gets called after board-specific INIT_MACHINE, and initializes most + * on-chip peripherals accessible on this board (except for few like USB): + * + * (a) Does any "standard config" pin muxing needed. Board-specific + * code will have muxed GPIO pins and done "nonstandard" setup; + * that code could live in the boot loader. + * (b) Populating board-specific platform_data with the data drivers + * rely on to handle wiring variations. + * (c) Creating platform devices as meaningful on this board and + * with this kernel configuration. + * + * Claiming GPIOs, and setting their direction and initial values, is the + * responsibility of the device drivers. So is responding to probe(). + * + * Board-specific knowlege like creating devices or pin setup is to be + * kept out of drivers as much as possible. In particular, pin setup + * may be handled by the boot loader, and drivers should expect it will + * normally have been done by the time they're probed. + */ +static int __init omap_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_i2c(); + omap_init_irda(); + omap_init_mmc(); + omap_init_rtc(); + omap_init_wdt(); + + return 0; +} +arch_initcall(omap_init_devices); + diff --git a/trunk/arch/arm/mach-omap1/fpga.c b/trunk/arch/arm/mach-omap1/fpga.c index c12a78335625..aca2a120813a 100644 --- a/trunk/arch/arm/mach-omap1/fpga.c +++ b/trunk/arch/arm/mach-omap1/fpga.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/fpga.c + * linux/arch/arm/mach-omap1/fpga.c * * Interrupt handler for OMAP-1510 Innovator FPGA * @@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void) */ omap_request_gpio(13); omap_set_gpio_direction(13, 1); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/trunk/arch/arm/mach-omap1/io.c b/trunk/arch/arm/mach-omap1/io.c index 207df0fe934d..eb8261d7dead 100644 --- a/trunk/arch/arm/mach-omap1/io.c +++ b/trunk/arch/arm/mach-omap1/io.c @@ -19,6 +19,7 @@ extern int clk_init(void); extern void omap_check_revision(void); +extern void omap_sram_init(void); /* * The machine specific code may provide the extra mapping besides the @@ -32,7 +33,6 @@ static struct map_desc omap_io_desc[] __initdata = { static struct map_desc omap730_io_desc[] __initdata = { { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE }, { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE }, - { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE } }; #endif @@ -40,27 +40,13 @@ static struct map_desc omap730_io_desc[] __initdata = { static struct map_desc omap1510_io_desc[] __initdata = { { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE }, { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE }, - { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE } }; #endif #if defined(CONFIG_ARCH_OMAP16XX) -static struct map_desc omap1610_io_desc[] __initdata = { +static struct map_desc omap16xx_io_desc[] __initdata = { { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE } -}; - -static struct map_desc omap5912_io_desc[] __initdata = { - { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, - { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, -/* - * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page - * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped. - * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte - * can be used. - */ - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE } }; #endif @@ -86,14 +72,13 @@ static void __init _omap_map_io(void) } #endif #if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap1610() || cpu_is_omap1710()) { - iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc)); - } - if (cpu_is_omap5912()) { - iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc)); + if (cpu_is_omap16xx()) { + iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } #endif + omap_sram_init(); + /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -108,8 +93,9 @@ static void __init _omap_map_io(void) /* * This should only get called from board specific init */ -void omap_map_common_io(void) +void __init omap_map_common_io(void) { if (!initialized) _omap_map_io(); } + diff --git a/trunk/arch/arm/mach-omap1/irq.c b/trunk/arch/arm/mach-omap1/irq.c index a11b6d807352..192ce6055faa 100644 --- a/trunk/arch/arm/mach-omap1/irq.c +++ b/trunk/arch/arm/mach-omap1/irq.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/irq.c + * linux/arch/arm/mach-omap1/irq.c * * Interrupt handler for all OMAP boards * @@ -165,10 +165,10 @@ static struct omap_irq_bank omap1610_irq_banks[] = { #endif static struct irqchip omap_irq_chip = { - .ack = omap_mask_ack_irq, - .mask = omap_mask_irq, - .unmask = omap_unmask_irq, - .wake = omap_wake_irq, + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, + .set_wake = omap_wake_irq, }; void __init omap_init_irq(void) diff --git a/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c b/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c index ec0d8285f243..be283cda63dd 100644 --- a/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-h2p2-debug.c + * linux/arch/arm/mach-omap1/leds-h2p2-debug.c * * Copyright 2003 by Texas Instruments Incorporated * @@ -13,6 +13,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/leds-innovator.c b/trunk/arch/arm/mach-omap1/leds-innovator.c index 8043b7d0f66e..c8ffd1ddcded 100644 --- a/trunk/arch/arm/mach-omap1/leds-innovator.c +++ b/trunk/arch/arm/mach-omap1/leds-innovator.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-innovator.c + * linux/arch/arm/mach-omap1/leds-innovator.c */ #include #include diff --git a/trunk/arch/arm/mach-omap1/leds-osk.c b/trunk/arch/arm/mach-omap1/leds-osk.c index 4a0e8b9d4fc3..2c8bda847c18 100644 --- a/trunk/arch/arm/mach-omap1/leds-osk.c +++ b/trunk/arch/arm/mach-omap1/leds-osk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-osk.c + * linux/arch/arm/mach-omap1/leds-osk.c * * LED driver for OSK, and optionally Mistral QVGA, boards */ @@ -64,7 +64,7 @@ static void tps_work(void *unused) static DECLARE_WORK(work, tps_work, NULL); -#ifdef CONFIG_FB_OMAP +#ifdef CONFIG_OMAP_OSK_MISTRAL /* For now, all system indicators require the Mistral board, since that * LED can be manipulated without a task context. This LED is either red, @@ -127,7 +127,7 @@ void osk_leds_event(led_event_t evt) hw_led_state = 0; break; -#ifdef CONFIG_FB_OMAP +#ifdef CONFIG_OMAP_OSK_MISTRAL case led_timer: hw_led_state ^= TIMER_LED; @@ -144,7 +144,7 @@ void osk_leds_event(led_event_t evt) mistral_setled(); break; -#endif /* CONFIG_FB_OMAP */ +#endif /* CONFIG_OMAP_OSK_MISTRAL */ /* "green" == tps LED1 (leftmost, normally power-good) * works only with DC adapter, not on battery power! diff --git a/trunk/arch/arm/mach-omap1/leds.c b/trunk/arch/arm/mach-omap1/leds.c index 8ab21fe98e1b..5c6b1bb6e722 100644 --- a/trunk/arch/arm/mach-omap1/leds.c +++ b/trunk/arch/arm/mach-omap1/leds.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds.c + * linux/arch/arm/mach-omap1/leds.c * * OMAP LEDs dispatcher */ @@ -20,7 +20,9 @@ omap_leds_init(void) if (machine_is_omap_innovator()) leds_event = innovator_leds_event; - else if (machine_is_omap_h2() || machine_is_omap_perseus2()) + else if (machine_is_omap_h2() + || machine_is_omap_h3() + || machine_is_omap_perseus2()) leds_event = h2p2_dbg_leds_event; else if (machine_is_omap_osk()) @@ -30,8 +32,12 @@ omap_leds_init(void) return -1; if (machine_is_omap_h2() + || machine_is_omap_h3() || machine_is_omap_perseus2() - || machine_is_omap_osk()) { +#ifdef CONFIG_OMAP_OSK_MISTRAL + || machine_is_omap_osk() +#endif + ) { /* LED1/LED2 pins can be used as GPIO (as done here), or by * the LPG (works even in deep sleep!), to drive a bicolor diff --git a/trunk/arch/arm/mach-omap1/serial.c b/trunk/arch/arm/mach-omap1/serial.c index 214e5d17c8b5..40c4f7c40e73 100644 --- a/trunk/arch/arm/mach-omap1/serial.c +++ b/trunk/arch/arm/mach-omap1/serial.c @@ -24,7 +24,11 @@ #include #include +#include #include +#ifdef CONFIG_PM +#include +#endif static struct clk * uart1_ck = NULL; static struct clk * uart2_ck = NULL; @@ -94,7 +98,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, @@ -193,6 +197,86 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) } } +#ifdef CONFIG_OMAP_SERIAL_WAKE + +static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + /* Need to do something with serial port right after wake-up? */ + return IRQ_HANDLED; +} + +/* + * Reroutes serial RX lines to GPIO lines for the duration of + * sleep to allow waking up the device from serial port even + * in deep sleep. + */ +void omap_serial_wake_trigger(int enable) +{ + if (!cpu_is_omap16xx()) + return; + + if (uart1_ck != NULL) { + if (enable) + omap_cfg_reg(V14_16XX_GPIO37); + else + omap_cfg_reg(V14_16XX_UART1_RX); + } + if (uart2_ck != NULL) { + if (enable) + omap_cfg_reg(R9_16XX_GPIO18); + else + omap_cfg_reg(R9_16XX_UART2_RX); + } + if (uart3_ck != NULL) { + if (enable) + omap_cfg_reg(L14_16XX_GPIO49); + else + omap_cfg_reg(L14_16XX_UART3_RX); + } +} + +static void __init omap_serial_set_port_wakeup(int gpio_nr) +{ + int ret; + + ret = omap_request_gpio(gpio_nr); + if (ret < 0) { + printk(KERN_ERR "Could not request UART wake GPIO: %i\n", + gpio_nr); + return; + } + omap_set_gpio_direction(gpio_nr, 1); + set_irq_type(OMAP_GPIO_IRQ(gpio_nr), IRQT_RISING); + ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt, + 0, "serial wakeup", NULL); + if (ret) { + omap_free_gpio(gpio_nr); + printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n", + gpio_nr); + return; + } + enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr)); +} + +static int __init omap_serial_wakeup_init(void) +{ + if (!cpu_is_omap16xx()) + return 0; + + if (uart1_ck != NULL) + omap_serial_set_port_wakeup(37); + if (uart2_ck != NULL) + omap_serial_set_port_wakeup(18); + if (uart3_ck != NULL) + omap_serial_set_port_wakeup(49); + + return 0; +} +late_initcall(omap_serial_wakeup_init); + +#endif /* CONFIG_OMAP_SERIAL_WAKE */ + static int __init omap_init(void) { return platform_device_register(&serial_device); diff --git a/trunk/arch/arm/mach-omap1/time.c b/trunk/arch/arm/mach-omap1/time.c index d540539c9bbb..191a9b1ee9b7 100644 --- a/trunk/arch/arm/mach-omap1/time.c +++ b/trunk/arch/arm/mach-omap1/time.c @@ -247,13 +247,6 @@ unsigned long long sched_clock(void) #define OMAP_32K_TIMER_TCR 0x04 #define OMAP_32K_TICKS_PER_HZ (32768 / HZ) -#if (32768 % HZ) != 0 -/* We cannot ignore modulo. - * Potential error can be as high as several percent. - */ -#define OMAP_32K_TICK_MODULO (32768 % HZ) -static unsigned modulo_count = 0; /* Counts 1/HZ units */ -#endif /* * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1 @@ -296,13 +289,22 @@ static inline void omap_32k_timer_stop(void) } /* - * Rounds down to nearest usec + * Rounds down to nearest usec. Note that this will overflow for larger values. */ static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k) { return (ticks_32k * 5*5*5*5*5*5) >> 9; } +/* + * Rounds down to nearest nsec. + */ +static inline unsigned long long +omap_32k_ticks_to_nsecs(unsigned long ticks_32k) +{ + return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9; +} + static unsigned long omap_32k_last_tick = 0; /* @@ -314,6 +316,15 @@ static unsigned long omap_32k_timer_gettimeoffset(void) return omap_32k_ticks_to_usecs(now - omap_32k_last_tick); } +/* + * Returns current time from boot in nsecs. It's OK for this to wrap + * around for now, as it's just a relative time stamp. + */ +unsigned long long sched_clock(void) +{ + return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read()); +} + /* * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this * function is also called from other interrupts to remove latency @@ -330,19 +341,6 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, now = omap_32k_sync_timer_read(); while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { -#ifdef OMAP_32K_TICK_MODULO - /* Modulo addition may put omap_32k_last_tick ahead of now - * and cause unwanted repetition of the while loop. - */ - if (unlikely(now - omap_32k_last_tick == ~0)) - break; - - modulo_count += OMAP_32K_TICK_MODULO; - if (modulo_count > HZ) { - ++omap_32k_last_tick; - modulo_count -= HZ; - } -#endif omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; timer_tick(regs); } diff --git a/trunk/arch/arm/mach-pxa/Kconfig b/trunk/arch/arm/mach-pxa/Kconfig index 405a55f2287c..3e5f69bb5ac4 100644 --- a/trunk/arch/arm/mach-pxa/Kconfig +++ b/trunk/arch/arm/mach-pxa/Kconfig @@ -20,40 +20,66 @@ config ARCH_PXA_IDP select PXA25x config PXA_SHARPSL - bool "SHARP SL-5600 and SL-C7xx Models" - select PXA25x + bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP select SHARP_PARAM help Say Y here if you intend to run this kernel on a - Sharp SL-5600 (Poodle), Sharp SL-C700 (Corgi), - SL-C750 (Shepherd) or a Sharp SL-C760 (Husky) - handheld computer. + Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), + SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), + SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. endchoice +if PXA_SHARPSL + +choice + prompt "Select target Sharp Zaurus device range" + +config PXA_SHARPSL_25x + bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + select PXA25x + +config PXA_SHARPSL_27x + bool "Sharp PXA270 models (SL-Cxx00)" + select PXA27x + +endchoice + +endif + endmenu config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select SHARP_LOCOMO config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + config PXA25x bool help @@ -74,4 +100,9 @@ config PXA_SHARP_C7xx help Enable support for all Sharp C7xx models +config PXA_SHARP_Cxx00 + bool + help + Enable common support for Sharp Cxx00 models + endif diff --git a/trunk/arch/arm/mach-pxa/Makefile b/trunk/arch/arm/mach-pxa/Makefile index efc2f657184e..f609a0f232cb 100644 --- a/trunk/arch/arm/mach-pxa/Makefile +++ b/trunk/arch/arm/mach-pxa/Makefile @@ -11,7 +11,8 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o # Support for blinky lights diff --git a/trunk/arch/arm/mach-pxa/corgi.c b/trunk/arch/arm/mach-pxa/corgi.c index 06ea730e8675..60c8b9d8bb9c 100644 --- a/trunk/arch/arm/mach-pxa/corgi.c +++ b/trunk/arch/arm/mach-pxa/corgi.c @@ -36,12 +36,13 @@ #include #include #include +#include #include #include -#include