diff --git a/[refs] b/[refs]
index fa237787fbb9..6fe300e36acf 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
---
-refs/heads/master: 309b0f125a22ee34c8f6962677255f7bf6af5e3d
+refs/heads/master: e82ca04387dd6c98722f5f48235089839fd04268
diff --git a/trunk/Documentation/DocBook/mtdnand.tmpl b/trunk/Documentation/DocBook/mtdnand.tmpl
index 999afe1ca8cb..a8c8cce50633 100644
--- a/trunk/Documentation/DocBook/mtdnand.tmpl
+++ b/trunk/Documentation/DocBook/mtdnand.tmpl
@@ -109,7 +109,7 @@
for most of the implementations. These functions can be replaced by the
board driver if neccecary. Those functions are called via pointers in the
NAND chip description structure. The board driver can set the functions which
- should be replaced by board dependend functions before calling nand_scan().
+ should be replaced by board dependent functions before calling nand_scan().
If the function pointer is NULL on entry to nand_scan() then the pointer
is set to the default function which is suitable for the detected chip type.
@@ -133,7 +133,7 @@
[REPLACEABLE]
Replaceable members hold hardware related functions which can be
provided by the board driver. The board driver can set the functions which
- should be replaced by board dependend functions before calling nand_scan().
+ should be replaced by board dependent functions before calling nand_scan().
If the function pointer is NULL on entry to nand_scan() then the pointer
is set to the default function which is suitable for the detected chip type.
@@ -156,9 +156,8 @@
Basic board driver
For most boards it will be sufficient to provide just the
- basic functions and fill out some really board dependend
+ basic functions and fill out some really board dependent
members in the nand chip description structure.
- See drivers/mtd/nand/skeleton for reference.
Basic defines
@@ -1295,7 +1294,9 @@ in this page
!Idrivers/mtd/nand/nand_base.c
!Idrivers/mtd/nand/nand_bbt.c
-!Idrivers/mtd/nand/nand_ecc.c
+
diff --git a/trunk/Documentation/DocBook/videobook.tmpl b/trunk/Documentation/DocBook/videobook.tmpl
index fdff984a5161..b629da33951d 100644
--- a/trunk/Documentation/DocBook/videobook.tmpl
+++ b/trunk/Documentation/DocBook/videobook.tmpl
@@ -976,7 +976,7 @@ static int camera_close(struct video_device *dev)
Interrupt Handling
Our example handler is for an ISA bus device. If it was PCI you would be
- able to share the interrupt and would have set SA_SHIRQ to indicate a
+ able to share the interrupt and would have set IRQF_SHARED to indicate a
shared IRQ. We pass the device pointer as the interrupt routine argument. We
don't need to since we only support one card but doing this will make it
easier to upgrade the driver for multiple devices in the future.
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
index 1cbbb8e28999..99f219a01e0e 100644
--- a/trunk/Documentation/feature-removal-schedule.txt
+++ b/trunk/Documentation/feature-removal-schedule.txt
@@ -257,3 +257,12 @@ Why: Code does no longer build since at least 2.6.0, apparently there is
Who: Ralf Baechle
---------------------------
+
+What: Interrupt only SA_* flags
+When: Januar 2007
+Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
+ out of the signal namespace.
+
+Who: Thomas Gleixner
+
+---------------------------
diff --git a/trunk/Documentation/irqflags-tracing.txt b/trunk/Documentation/irqflags-tracing.txt
new file mode 100644
index 000000000000..6a444877ee0b
--- /dev/null
+++ b/trunk/Documentation/irqflags-tracing.txt
@@ -0,0 +1,57 @@
+IRQ-flags state tracing
+
+started by Ingo Molnar
+
+the "irq-flags tracing" feature "traces" hardirq and softirq state, in
+that it gives interested subsystems an opportunity to be notified of
+every hardirqs-off/hardirqs-on, softirqs-off/softirqs-on event that
+happens in the kernel.
+
+CONFIG_TRACE_IRQFLAGS_SUPPORT is needed for CONFIG_PROVE_SPIN_LOCKING
+and CONFIG_PROVE_RW_LOCKING to be offered by the generic lock debugging
+code. Otherwise only CONFIG_PROVE_MUTEX_LOCKING and
+CONFIG_PROVE_RWSEM_LOCKING will be offered on an architecture - these
+are locking APIs that are not used in IRQ context. (the one exception
+for rwsems is worked around)
+
+architecture support for this is certainly not in the "trivial"
+category, because lots of lowlevel assembly code deal with irq-flags
+state changes. But an architecture can be irq-flags-tracing enabled in a
+rather straightforward and risk-free manner.
+
+Architectures that want to support this need to do a couple of
+code-organizational changes first:
+
+- move their irq-flags manipulation code from their asm/system.h header
+ to asm/irqflags.h
+
+- rename local_irq_disable()/etc to raw_local_irq_disable()/etc. so that
+ the linux/irqflags.h code can inject callbacks and can construct the
+ real local_irq_disable()/etc APIs.
+
+- add and enable TRACE_IRQFLAGS_SUPPORT in their arch level Kconfig file
+
+and then a couple of functional changes are needed as well to implement
+irq-flags-tracing support:
+
+- in lowlevel entry code add (build-conditional) calls to the
+ trace_hardirqs_off()/trace_hardirqs_on() functions. The lock validator
+ closely guards whether the 'real' irq-flags matches the 'virtual'
+ irq-flags state, and complains loudly (and turns itself off) if the
+ two do not match. Usually most of the time for arch support for
+ irq-flags-tracing is spent in this state: look at the lockdep
+ complaint, try to figure out the assembly code we did not cover yet,
+ fix and repeat. Once the system has booted up and works without a
+ lockdep complaint in the irq-flags-tracing functions arch support is
+ complete.
+- if the architecture has non-maskable interrupts then those need to be
+ excluded from the irq-tracing [and lock validation] mechanism via
+ lockdep_off()/lockdep_on().
+
+in general there is no risk from having an incomplete irq-flags-tracing
+implementation in an architecture: lockdep will detect that and will
+turn itself off. I.e. the lock validator will still be reliable. There
+should be no crashes due to irq-tracing bugs. (except if the assembly
+changes break other code by modifying conditions or registers that
+shouldnt be)
+
diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
index 86e9282d1c20..149f62ba14a5 100644
--- a/trunk/Documentation/kernel-parameters.txt
+++ b/trunk/Documentation/kernel-parameters.txt
@@ -435,6 +435,15 @@ running once the system is up.
debug [KNL] Enable kernel debugging (events log level).
+ debug_locks_verbose=
+ [KNL] verbose self-tests
+ Format=<0|1>
+ Print debugging info while doing the locking API
+ self-tests.
+ We default to 0 (no extra messages), setting it to
+ 1 will print _a lot_ more information - normally
+ only useful to kernel developers.
+
decnet= [HW,NET]
Format: [,]
See also Documentation/networking/decnet.txt.
diff --git a/trunk/Documentation/lockdep-design.txt b/trunk/Documentation/lockdep-design.txt
new file mode 100644
index 000000000000..00d93605bfd3
--- /dev/null
+++ b/trunk/Documentation/lockdep-design.txt
@@ -0,0 +1,197 @@
+Runtime locking correctness validator
+=====================================
+
+started by Ingo Molnar
+additions by Arjan van de Ven
+
+Lock-class
+----------
+
+The basic object the validator operates upon is a 'class' of locks.
+
+A class of locks is a group of locks that are logically the same with
+respect to locking rules, even if the locks may have multiple (possibly
+tens of thousands of) instantiations. For example a lock in the inode
+struct is one class, while each inode has its own instantiation of that
+lock class.
+
+The validator tracks the 'state' of lock-classes, and it tracks
+dependencies between different lock-classes. The validator maintains a
+rolling proof that the state and the dependencies are correct.
+
+Unlike an lock instantiation, the lock-class itself never goes away: when
+a lock-class is used for the first time after bootup it gets registered,
+and all subsequent uses of that lock-class will be attached to this
+lock-class.
+
+State
+-----
+
+The validator tracks lock-class usage history into 5 separate state bits:
+
+- 'ever held in hardirq context' [ == hardirq-safe ]
+- 'ever held in softirq context' [ == softirq-safe ]
+- 'ever held with hardirqs enabled' [ == hardirq-unsafe ]
+- 'ever held with softirqs and hardirqs enabled' [ == softirq-unsafe ]
+
+- 'ever used' [ == !unused ]
+
+Single-lock state rules:
+------------------------
+
+A softirq-unsafe lock-class is automatically hardirq-unsafe as well. The
+following states are exclusive, and only one of them is allowed to be
+set for any lock-class:
+
+ and
+ and
+
+The validator detects and reports lock usage that violate these
+single-lock state rules.
+
+Multi-lock dependency rules:
+----------------------------
+
+The same lock-class must not be acquired twice, because this could lead
+to lock recursion deadlocks.
+
+Furthermore, two locks may not be taken in different order:
+
+ ->
+ ->
+
+because this could lead to lock inversion deadlocks. (The validator
+finds such dependencies in arbitrary complexity, i.e. there can be any
+other locking sequence between the acquire-lock operations, the
+validator will still track all dependencies between locks.)
+
+Furthermore, the following usage based lock dependencies are not allowed
+between any two lock-classes:
+
+ ->
+ ->
+
+The first rule comes from the fact the a hardirq-safe lock could be
+taken by a hardirq context, interrupting a hardirq-unsafe lock - and
+thus could result in a lock inversion deadlock. Likewise, a softirq-safe
+lock could be taken by an softirq context, interrupting a softirq-unsafe
+lock.
+
+The above rules are enforced for any locking sequence that occurs in the
+kernel: when acquiring a new lock, the validator checks whether there is
+any rule violation between the new lock and any of the held locks.
+
+When a lock-class changes its state, the following aspects of the above
+dependency rules are enforced:
+
+- if a new hardirq-safe lock is discovered, we check whether it
+ took any hardirq-unsafe lock in the past.
+
+- if a new softirq-safe lock is discovered, we check whether it took
+ any softirq-unsafe lock in the past.
+
+- if a new hardirq-unsafe lock is discovered, we check whether any
+ hardirq-safe lock took it in the past.
+
+- if a new softirq-unsafe lock is discovered, we check whether any
+ softirq-safe lock took it in the past.
+
+(Again, we do these checks too on the basis that an interrupt context
+could interrupt _any_ of the irq-unsafe or hardirq-unsafe locks, which
+could lead to a lock inversion deadlock - even if that lock scenario did
+not trigger in practice yet.)
+
+Exception: Nested data dependencies leading to nested locking
+-------------------------------------------------------------
+
+There are a few cases where the Linux kernel acquires more than one
+instance of the same lock-class. Such cases typically happen when there
+is some sort of hierarchy within objects of the same type. In these
+cases there is an inherent "natural" ordering between the two objects
+(defined by the properties of the hierarchy), and the kernel grabs the
+locks in this fixed order on each of the objects.
+
+An example of such an object hieararchy that results in "nested locking"
+is that of a "whole disk" block-dev object and a "partition" block-dev
+object; the partition is "part of" the whole device and as long as one
+always takes the whole disk lock as a higher lock than the partition
+lock, the lock ordering is fully correct. The validator does not
+automatically detect this natural ordering, as the locking rule behind
+the ordering is not static.
+
+In order to teach the validator about this correct usage model, new
+versions of the various locking primitives were added that allow you to
+specify a "nesting level". An example call, for the block device mutex,
+looks like this:
+
+enum bdev_bd_mutex_lock_class
+{
+ BD_MUTEX_NORMAL,
+ BD_MUTEX_WHOLE,
+ BD_MUTEX_PARTITION
+};
+
+ mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
+
+In this case the locking is done on a bdev object that is known to be a
+partition.
+
+The validator treats a lock that is taken in such a nested fasion as a
+separate (sub)class for the purposes of validation.
+
+Note: When changing code to use the _nested() primitives, be careful and
+check really thoroughly that the hiearchy is correctly mapped; otherwise
+you can get false positives or false negatives.
+
+Proof of 100% correctness:
+--------------------------
+
+The validator achieves perfect, mathematical 'closure' (proof of locking
+correctness) in the sense that for every simple, standalone single-task
+locking sequence that occured at least once during the lifetime of the
+kernel, the validator proves it with a 100% certainty that no
+combination and timing of these locking sequences can cause any class of
+lock related deadlock. [*]
+
+I.e. complex multi-CPU and multi-task locking scenarios do not have to
+occur in practice to prove a deadlock: only the simple 'component'
+locking chains have to occur at least once (anytime, in any
+task/context) for the validator to be able to prove correctness. (For
+example, complex deadlocks that would normally need more than 3 CPUs and
+a very unlikely constellation of tasks, irq-contexts and timings to
+occur, can be detected on a plain, lightly loaded single-CPU system as
+well!)
+
+This radically decreases the complexity of locking related QA of the
+kernel: what has to be done during QA is to trigger as many "simple"
+single-task locking dependencies in the kernel as possible, at least
+once, to prove locking correctness - instead of having to trigger every
+possible combination of locking interaction between CPUs, combined with
+every possible hardirq and softirq nesting scenario (which is impossible
+to do in practice).
+
+[*] assuming that the validator itself is 100% correct, and no other
+ part of the system corrupts the state of the validator in any way.
+ We also assume that all NMI/SMM paths [which could interrupt
+ even hardirq-disabled codepaths] are correct and do not interfere
+ with the validator. We also assume that the 64-bit 'chain hash'
+ value is unique for every lock-chain in the system. Also, lock
+ recursion must not be higher than 20.
+
+Performance:
+------------
+
+The above rules require _massive_ amounts of runtime checking. If we did
+that for every lock taken and for every irqs-enable event, it would
+render the system practically unusably slow. The complexity of checking
+is O(N^2), so even with just a few hundred lock-classes we'd have to do
+tens of thousands of checks for every event.
+
+This problem is solved by checking any given 'locking scenario' (unique
+sequence of locks taken after each other) only once. A simple stack of
+held locks is maintained, and a lightweight 64-bit hash value is
+calculated, which hash is unique for every lock chain. The hash value,
+when the chain is validated for the first time, is then put into a hash
+table, which hash-table can be checked in a lockfree manner. If the
+locking chain occurs again later on, the hash table tells us that we
+dont have to validate the chain again.
diff --git a/trunk/Documentation/networking/ipvs-sysctl.txt b/trunk/Documentation/networking/ipvs-sysctl.txt
new file mode 100644
index 000000000000..4ccdbca03811
--- /dev/null
+++ b/trunk/Documentation/networking/ipvs-sysctl.txt
@@ -0,0 +1,143 @@
+/proc/sys/net/ipv4/vs/* Variables:
+
+am_droprate - INTEGER
+ default 10
+
+ It sets the always mode drop rate, which is used in the mode 3
+ of the drop_rate defense.
+
+amemthresh - INTEGER
+ default 1024
+
+ It sets the available memory threshold (in pages), which is
+ used in the automatic modes of defense. When there is no
+ enough available memory, the respective strategy will be
+ enabled and the variable is automatically set to 2, otherwise
+ the strategy is disabled and the variable is set to 1.
+
+cache_bypass - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ If it is enabled, forward packets to the original destination
+ directly when no cache server is available and destination
+ address is not local (iph->daddr is RTN_UNICAST). It is mostly
+ used in transparent web cache cluster.
+
+debug_level - INTEGER
+ 0 - transmission error messages (default)
+ 1 - non-fatal error messages
+ 2 - configuration
+ 3 - destination trash
+ 4 - drop entry
+ 5 - service lookup
+ 6 - scheduling
+ 7 - connection new/expire, lookup and synchronization
+ 8 - state transition
+ 9 - binding destination, template checks and applications
+ 10 - IPVS packet transmission
+ 11 - IPVS packet handling (ip_vs_in/ip_vs_out)
+ 12 or more - packet traversal
+
+ Only available when IPVS is compiled with the CONFIG_IPVS_DEBUG
+
+ Higher debugging levels include the messages for lower debugging
+ levels, so setting debug level 2, includes level 0, 1 and 2
+ messages. Thus, logging becomes more and more verbose the higher
+ the level.
+
+drop_entry - INTEGER
+ 0 - disabled (default)
+
+ The drop_entry defense is to randomly drop entries in the
+ connection hash table, just in order to collect back some
+ memory for new connections. In the current code, the
+ drop_entry procedure can be activated every second, then it
+ randomly scans 1/32 of the whole and drops entries that are in
+ the SYN-RECV/SYNACK state, which should be effective against
+ syn-flooding attack.
+
+ The valid values of drop_entry are from 0 to 3, where 0 means
+ that this strategy is always disabled, 1 and 2 mean automatic
+ modes (when there is no enough available memory, the strategy
+ is enabled and the variable is automatically set to 2,
+ otherwise the strategy is disabled and the variable is set to
+ 1), and 3 means that that the strategy is always enabled.
+
+drop_packet - INTEGER
+ 0 - disabled (default)
+
+ The drop_packet defense is designed to drop 1/rate packets
+ before forwarding them to real servers. If the rate is 1, then
+ drop all the incoming packets.
+
+ The value definition is the same as that of the drop_entry. In
+ the automatic mode, the rate is determined by the follow
+ formula: rate = amemthresh / (amemthresh - available_memory)
+ when available memory is less than the available memory
+ threshold. When the mode 3 is set, the always mode drop rate
+ is controlled by the /proc/sys/net/ipv4/vs/am_droprate.
+
+expire_nodest_conn - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ The default value is 0, the load balancer will silently drop
+ packets when its destination server is not available. It may
+ be useful, when user-space monitoring program deletes the
+ destination server (because of server overload or wrong
+ detection) and add back the server later, and the connections
+ to the server can continue.
+
+ If this feature is enabled, the load balancer will expire the
+ connection immediately when a packet arrives and its
+ destination server is not available, then the client program
+ will be notified that the connection is closed. This is
+ equivalent to the feature some people requires to flush
+ connections when its destination is not available.
+
+expire_quiescent_template - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ When set to a non-zero value, the load balancer will expire
+ persistent templates when the destination server is quiescent.
+ This may be useful, when a user makes a destination server
+ quiescent by setting its weight to 0 and it is desired that
+ subsequent otherwise persistent connections are sent to a
+ different destination server. By default new persistent
+ connections are allowed to quiescent destination servers.
+
+ If this feature is enabled, the load balancer will expire the
+ persistence template if it is to be used to schedule a new
+ connection and the destination server is quiescent.
+
+nat_icmp_send - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ It controls sending icmp error messages (ICMP_DEST_UNREACH)
+ for VS/NAT when the load balancer receives packets from real
+ servers but the connection entries don't exist.
+
+secure_tcp - INTEGER
+ 0 - disabled (default)
+
+ The secure_tcp defense is to use a more complicated state
+ transition table and some possible short timeouts of each
+ state. In the VS/NAT, it delays the entering the ESTABLISHED
+ until the real server starts to send data and ACK packet
+ (after 3-way handshake).
+
+ The value definition is the same as that of drop_entry or
+ drop_packet.
+
+sync_threshold - INTEGER
+ default 3
+
+ It sets synchronization threshold, which is the minimum number
+ of incoming packets that a connection needs to receive before
+ the connection will be synchronized. A connection will be
+ synchronized, every time the number of its incoming packets
+ modulus 50 equals the threshold. The range of the threshold is
+ from 0 to 49.
diff --git a/trunk/Documentation/pci.txt b/trunk/Documentation/pci.txt
index 3242e5c1ee9c..2b395e478961 100644
--- a/trunk/Documentation/pci.txt
+++ b/trunk/Documentation/pci.txt
@@ -225,7 +225,7 @@ Generic flavors of pci_request_region() are request_mem_region()
Use these for address resources that are not described by "normal" PCI
interfaces (e.g. BAR).
- All interrupt handlers should be registered with SA_SHIRQ and use the devid
+ All interrupt handlers should be registered with IRQF_SHARED and use the devid
to map IRQs to devices (remember that all PCI interrupts are shared).
diff --git a/trunk/Documentation/powerpc/booting-without-of.txt b/trunk/Documentation/powerpc/booting-without-of.txt
index 217e51768b87..3c62e66e1fcc 100644
--- a/trunk/Documentation/powerpc/booting-without-of.txt
+++ b/trunk/Documentation/powerpc/booting-without-of.txt
@@ -1436,9 +1436,9 @@ platforms are moved over to use the flattened-device-tree model.
interrupts = <1d 3>;
interrupt-parent = <40000>;
num-channels = <4>;
- channel-fifo-len = <24>;
+ channel-fifo-len = <18>;
exec-units-mask = <000000fe>;
- descriptor-types-mask = <073f1127>;
+ descriptor-types-mask = <012b0ebf>;
};
diff --git a/trunk/Documentation/scsi/ChangeLog.megaraid_sas b/trunk/Documentation/scsi/ChangeLog.megaraid_sas
index 0a85a7e8120e..d9e5960dafd5 100644
--- a/trunk/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/trunk/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,4 +1,20 @@
+1 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro
+2 Current Version : 00.00.03.01
+3 Older Version : 00.00.02.04
+
+i. Added support for ZCR controller.
+
+ New device id 0x413 added.
+
+ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW.
+
+ Interrupt is enabled after required initialization is over.
+ This is done to ensure that driver is ready to handle interrupts when
+ it is generated by the controller.
+
+ -Sumant Patro
+
1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro
2 Current Version : 00.00.02.04
3 Older Version : 00.00.02.04
diff --git a/trunk/Documentation/scsi/tmscsim.txt b/trunk/Documentation/scsi/tmscsim.txt
index e165229adf50..df7a02bfb5bf 100644
--- a/trunk/Documentation/scsi/tmscsim.txt
+++ b/trunk/Documentation/scsi/tmscsim.txt
@@ -109,7 +109,7 @@ than the 33.33 MHz being in the PCI spec.
If you want to share the IRQ with another device and the driver refuses to
do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to
-SA_SHIRQ | SA_INTERRUPT.
+IRQF_SHARED | IRQF_DISABLED.
3.Features
diff --git a/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index bb18115d5170..69866d5997a4 100644
--- a/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -1149,7 +1149,7 @@
}
chip->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_mychip_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+ IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
snd_mychip_free(chip);
return -EBUSY;
@@ -1323,7 +1323,7 @@
irq, snd_mychip_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+ IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
snd_mychip_free(chip);
return -EBUSY;
@@ -1342,7 +1342,7 @@
On the PCI bus, the interrupts can be shared. Thus,
- SA_SHIRQ is given as the interrupt flag of
+ IRQF_SHARED is given as the interrupt flag of
request_irq().
diff --git a/trunk/Documentation/sysctl/vm.txt b/trunk/Documentation/sysctl/vm.txt
index 86754eb390da..7cee90223d3a 100644
--- a/trunk/Documentation/sysctl/vm.txt
+++ b/trunk/Documentation/sysctl/vm.txt
@@ -28,6 +28,7 @@ Currently, these files are in /proc/sys/vm:
- block_dump
- drop-caches
- zone_reclaim_mode
+- min_unmapped_ratio
- panic_on_oom
==============================================================
@@ -168,6 +169,19 @@ in all nodes of the system.
=============================================================
+min_unmapped_ratio:
+
+This is available only on NUMA kernels.
+
+A percentage of the file backed pages in each zone. Zone reclaim will only
+occur if more than this percentage of pages are file backed and unmapped.
+This is to insure that a minimal amount of local pages is still available for
+file I/O even if the node is overallocated.
+
+The default is 1 percent.
+
+=============================================================
+
panic_on_oom
This enables or disables panic on out-of-memory feature. If this is set to 1,
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
index 42be131139c8..5f76a4f5cd4b 100644
--- a/trunk/MAINTAINERS
+++ b/trunk/MAINTAINERS
@@ -861,6 +861,8 @@ S: Maintained
DOCBOOK FOR DOCUMENTATION
P: Martin Waitz
M: tali@admingilde.org
+P: Randy Dunlap
+M: rdunlap@xenotime.net
T: git http://tali.admingilde.org/git/linux-docbook.git
S: Maintained
@@ -2298,6 +2300,14 @@ M: promise@pnd-pc.demon.co.uk
W: http://www.pnd-pc.demon.co.uk/promise/
S: Maintained
+PVRUSB2 VIDEO4LINUX DRIVER
+P: Mike Isely
+M: isely@pobox.com
+L: pvrusb2@isely.net
+L: video4linux-list@redhat.com
+W: http://www.isely.net/pvrusb2/
+S: Maintained
+
PXA2xx SUPPORT
P: Nicolas Pitre
M: nico@cam.org
diff --git a/trunk/Makefile b/trunk/Makefile
index 4dcf25d43fa6..b36aeb617bd2 100644
--- a/trunk/Makefile
+++ b/trunk/Makefile
@@ -309,6 +309,9 @@ CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common
+# Force gcc to behave correct even for buggy distributions
+CFLAGS += $(call cc-option, -fno-stack-protector-all \
+ -fno-stack-protector)
AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -809,8 +812,8 @@ endif
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
-prepare1: prepare2 include/linux/version.h include/asm \
- include/config/auto.conf
+prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
+ include/asm include/config/auto.conf
ifneq ($(KBUILD_MODULES),)
$(Q)mkdir -p $(MODVERDIR)
$(Q)rm -f $(MODVERDIR)/*
@@ -845,21 +848,26 @@ include/asm:
# needs to be updated, so this check is forced on all builds
uts_len := 64
+define filechk_utsrelease.h
+ if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
+ exit 1; \
+ fi; \
+ (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
define filechk_version.h
- if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
- echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
- exit 1; \
- fi; \
- (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
- echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
- echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
- )
+ (echo \#define LINUX_VERSION_CODE $(shell \
+ expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
-include/linux/version.h: $(srctree)/Makefile include/config/kernel.release FORCE
+include/linux/version.h: $(srctree)/Makefile FORCE
$(call filechk,version.h)
+include/linux/utsrelease.h: include/config/kernel.release FORCE
+ $(call filechk,utsrelease.h)
+
# ---------------------------------------------------------------------------
PHONY += depend dep
@@ -952,7 +960,8 @@ CLEAN_FILES += vmlinux System.map \
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include2
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
- include/linux/autoconf.h include/linux/version.h \
+ include/linux/autoconf.h include/linux/version.h \
+ include/linux/utsrelease.h \
Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
diff --git a/trunk/arch/alpha/boot/bootp.c b/trunk/arch/alpha/boot/bootp.c
index ec53c28e33de..3af21c789339 100644
--- a/trunk/arch/alpha/boot/bootp.c
+++ b/trunk/arch/alpha/boot/bootp.c
@@ -9,7 +9,7 @@
*/
#include
#include
-#include
+#include
#include
#include
diff --git a/trunk/arch/alpha/boot/bootpz.c b/trunk/arch/alpha/boot/bootpz.c
index a6657f2cf9bd..4307bde80a35 100644
--- a/trunk/arch/alpha/boot/bootpz.c
+++ b/trunk/arch/alpha/boot/bootpz.c
@@ -11,7 +11,7 @@
*/
#include
#include
-#include
+#include
#include
#include
diff --git a/trunk/arch/alpha/boot/main.c b/trunk/arch/alpha/boot/main.c
index 78c9b0b6eea7..90ed55b662a8 100644
--- a/trunk/arch/alpha/boot/main.c
+++ b/trunk/arch/alpha/boot/main.c
@@ -7,7 +7,7 @@
*/
#include
#include
-#include
+#include
#include
#include
diff --git a/trunk/arch/alpha/kernel/irq.c b/trunk/arch/alpha/kernel/irq.c
index bd193ffd6fe0..729c475d2269 100644
--- a/trunk/arch/alpha/kernel/irq.c
+++ b/trunk/arch/alpha/kernel/irq.c
@@ -94,12 +94,12 @@ show_interrupts(struct seq_file *p, void *v)
#endif
seq_printf(p, " %14s", irq_desc[irq].chip->typename);
seq_printf(p, " %c%s",
- (action->flags & SA_INTERRUPT)?'+':' ',
+ (action->flags & IRQF_DISABLED)?'+':' ',
action->name);
for (action=action->next; action; action = action->next) {
seq_printf(p, ", %c%s",
- (action->flags & SA_INTERRUPT)?'+':' ',
+ (action->flags & IRQF_DISABLED)?'+':' ',
action->name);
}
diff --git a/trunk/arch/alpha/kernel/irq_alpha.c b/trunk/arch/alpha/kernel/irq_alpha.c
index ffa4ac543cf2..ddf5cf8dcb0b 100644
--- a/trunk/arch/alpha/kernel/irq_alpha.c
+++ b/trunk/arch/alpha/kernel/irq_alpha.c
@@ -214,7 +214,7 @@ static unsigned int rtc_startup(unsigned int irq) { return 0; }
struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "timer",
};
diff --git a/trunk/arch/alpha/kernel/process.c b/trunk/arch/alpha/kernel/process.c
index 01c8c8b23337..41ebf51a107a 100644
--- a/trunk/arch/alpha/kernel/process.c
+++ b/trunk/arch/alpha/kernel/process.c
@@ -474,7 +474,7 @@ do_sys_execve(char __user *ufilename, char __user * __user *argv,
*/
unsigned long
-thread_saved_pc(task_t *t)
+thread_saved_pc(struct task_struct *t)
{
unsigned long base = (unsigned long)task_stack_page(t);
unsigned long fp, sp = task_thread_info(t)->pcb.ksp;
diff --git a/trunk/arch/alpha/kernel/sys_jensen.c b/trunk/arch/alpha/kernel/sys_jensen.c
index 0148e095638f..4ac2b328b8de 100644
--- a/trunk/arch/alpha/kernel/sys_jensen.c
+++ b/trunk/arch/alpha/kernel/sys_jensen.c
@@ -74,7 +74,7 @@ jensen_local_startup(unsigned int irq)
* the IPL from being dropped during handler processing.
*/
if (irq_desc[irq].action)
- irq_desc[irq].action->flags |= SA_INTERRUPT;
+ irq_desc[irq].action->flags |= IRQF_DISABLED;
return 0;
}
diff --git a/trunk/arch/alpha/kernel/sys_titan.c b/trunk/arch/alpha/kernel/sys_titan.c
index a8bfc8c16a7d..302aab38d95f 100644
--- a/trunk/arch/alpha/kernel/sys_titan.c
+++ b/trunk/arch/alpha/kernel/sys_titan.c
@@ -279,15 +279,15 @@ titan_late_init(void)
* all reported to the kernel as machine checks, so the handler
* is a nop so it can be called to count the individual events.
*/
- request_irq(63+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
"CChip Error", NULL);
- request_irq(62+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
"PChip 0 H_Error", NULL);
- request_irq(61+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
"PChip 1 H_Error", NULL);
- request_irq(60+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
"PChip 0 C_Error", NULL);
- request_irq(59+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
"PChip 1 C_Error", NULL);
/*
@@ -348,9 +348,9 @@ privateer_init_pci(void)
* Hook a couple of extra err interrupts that the
* common titan code won't.
*/
- request_irq(53+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
"NMI", NULL);
- request_irq(50+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
"Temperature Warning", NULL);
/*
diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
index f123c7c9fc98..f81a62380add 100644
--- a/trunk/arch/arm/Kconfig
+++ b/trunk/arch/arm/Kconfig
@@ -47,6 +47,18 @@ config MCA
(and especially the web page given
there) before attempting to build an MCA bus kernel.
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config HARDIRQS_SW_RESEND
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
@@ -121,11 +133,11 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91RM9200
- bool "Atmel AT91RM9200"
+config ARCH_AT91
+ bool "Atmel AT91"
help
- Say Y here if you intend to run this kernel on an Atmel
- AT91RM9200-based board.
+ This enables support for systems based on the Atmel AT91RM9200
+ and AT91SAM9xxx processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
@@ -547,7 +559,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91RM9200
+ ARCH_AT91RM9200 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
@@ -678,7 +690,7 @@ config XIP_PHYS_ADDR
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
menu "CPU Frequency scaling"
diff --git a/trunk/arch/arm/Makefile b/trunk/arch/arm/Makefile
index a3bbaaf480b9..3345c6d0fd1e 100644
--- a/trunk/arch/arm/Makefile
+++ b/trunk/arch/arm/Makefile
@@ -114,7 +114,7 @@ endif
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
diff --git a/trunk/arch/arm/boot/compressed/head.S b/trunk/arch/arm/boot/compressed/head.S
index f7b5c6db30f5..14a9ff9c68df 100644
--- a/trunk/arch/arm/boot/compressed/head.S
+++ b/trunk/arch/arm/boot/compressed/head.S
@@ -447,8 +447,11 @@ __common_mmu_cache_on:
mov r1, #-1
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
- mcr p15, 0, r0, c1, c0, 0 @ load control register
- mov pc, lr
+ b 1f
+ .align 5 @ cache line aligned
+1: mcr p15, 0, r0, c1, c0, 0 @ load control register
+ mrc p15, 0, r0, c1, c0, 0 @ and read it back to
+ sub pc, lr, r0, lsr #32 @ properly flush pipeline
/*
* All code following this line is relocatable. It is relocated by
diff --git a/trunk/arch/arm/common/gic.c b/trunk/arch/arm/common/gic.c
index c02dc8116a18..f3c1ebfdd0aa 100644
--- a/trunk/arch/arm/common/gic.c
+++ b/trunk/arch/arm/common/gic.c
@@ -33,6 +33,7 @@
static void __iomem *gic_dist_base;
static void __iomem *gic_cpu_base;
+static DEFINE_SPINLOCK(irq_controller_lock);
/*
* Routines to acknowledge, disable and enable interrupts
@@ -52,32 +53,45 @@ static void __iomem *gic_cpu_base;
static void gic_ack_irq(unsigned int irq)
{
u32 mask = 1 << (irq % 32);
+
+ spin_lock(&irq_controller_lock);
writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
writel(irq, gic_cpu_base + GIC_CPU_EOI);
+ spin_unlock(&irq_controller_lock);
}
static void gic_mask_irq(unsigned int irq)
{
u32 mask = 1 << (irq % 32);
+
+ spin_lock(&irq_controller_lock);
writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+ spin_unlock(&irq_controller_lock);
}
static void gic_unmask_irq(unsigned int irq)
{
u32 mask = 1 << (irq % 32);
+
+ spin_lock(&irq_controller_lock);
writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+ spin_unlock(&irq_controller_lock);
}
#ifdef CONFIG_SMP
-static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
{
void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
unsigned int shift = (irq % 4) * 8;
+ unsigned int cpu = first_cpu(mask_val);
u32 val;
+ spin_lock(&irq_controller_lock);
+ irq_desc[irq].cpu = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
+ spin_unlock(&irq_controller_lock);
}
#endif
@@ -86,7 +100,7 @@ static struct irqchip gic_chip = {
.mask = gic_mask_irq,
.unmask = gic_unmask_irq,
#ifdef CONFIG_SMP
- .set_cpu = gic_set_cpu,
+ .set_affinity = gic_set_cpu,
#endif
};
diff --git a/trunk/arch/arm/common/sa1111.c b/trunk/arch/arm/common/sa1111.c
index fe06a36a2130..1cdb26a47e1f 100644
--- a/trunk/arch/arm/common/sa1111.c
+++ b/trunk/arch/arm/common/sa1111.c
@@ -150,7 +150,7 @@ static void
sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
{
unsigned int stat0, stat1, i;
- void __iomem *base = desc->data;
+ void __iomem *base = get_irq_data(irq);
stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
@@ -168,11 +168,11 @@ sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
if (stat0 & 1)
- do_edge_IRQ(i, irq_desc + i, regs);
+ handle_edge_irq(i, irq_desc + i, regs);
for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
if (stat1 & 1)
- do_edge_IRQ(i, irq_desc + i, regs);
+ handle_edge_irq(i, irq_desc + i, regs);
/* For level-based interrupts */
desc->chip->unmask(irq);
diff --git a/trunk/arch/arm/common/time-acorn.c b/trunk/arch/arm/common/time-acorn.c
index 486add853fb8..3f60dd9aca80 100644
--- a/trunk/arch/arm/common/time-acorn.c
+++ b/trunk/arch/arm/common/time-acorn.c
@@ -16,6 +16,7 @@
#include
#include
#include
+#include
#include
#include
@@ -76,7 +77,7 @@ ioc_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction ioc_timer_irq = {
.name = "timer",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.handler = ioc_timer_interrupt
};
diff --git a/trunk/arch/arm/configs/at91rm9200dk_defconfig b/trunk/arch/arm/configs/at91rm9200dk_defconfig
index 9e1c1cceb735..4f3d8d37741e 100644
--- a/trunk/arch/arm/configs/at91rm9200dk_defconfig
+++ b/trunk/arch/arm/configs/at91rm9200dk_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/at91rm9200ek_defconfig b/trunk/arch/arm/configs/at91rm9200ek_defconfig
index 6e0805a971d7..08b5dc38876f 100644
--- a/trunk/arch/arm/configs/at91rm9200ek_defconfig
+++ b/trunk/arch/arm/configs/at91rm9200ek_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/ateb9200_defconfig b/trunk/arch/arm/configs/ateb9200_defconfig
index 69c39e098743..bee7813d040e 100644
--- a/trunk/arch/arm/configs/ateb9200_defconfig
+++ b/trunk/arch/arm/configs/ateb9200_defconfig
@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/carmeva_defconfig b/trunk/arch/arm/configs/carmeva_defconfig
index 5ccd29a7c1fb..8a075c8ecc63 100644
--- a/trunk/arch/arm/configs/carmeva_defconfig
+++ b/trunk/arch/arm/configs/carmeva_defconfig
@@ -82,6 +82,7 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/csb337_defconfig b/trunk/arch/arm/configs/csb337_defconfig
index 94bd9932a402..3594155a8137 100644
--- a/trunk/arch/arm/configs/csb337_defconfig
+++ b/trunk/arch/arm/configs/csb337_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/csb637_defconfig b/trunk/arch/arm/configs/csb637_defconfig
index 1519124c5501..640d70c1f066 100644
--- a/trunk/arch/arm/configs/csb637_defconfig
+++ b/trunk/arch/arm/configs/csb637_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/kafa_defconfig b/trunk/arch/arm/configs/kafa_defconfig
index 51ded20e3f64..1db633e2c940 100644
--- a/trunk/arch/arm/configs/kafa_defconfig
+++ b/trunk/arch/arm/configs/kafa_defconfig
@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/kb9202_defconfig b/trunk/arch/arm/configs/kb9202_defconfig
index fee4f566452e..45396e087196 100644
--- a/trunk/arch/arm/configs/kb9202_defconfig
+++ b/trunk/arch/arm/configs/kb9202_defconfig
@@ -80,6 +80,7 @@ CONFIG_KMOD=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/trunk/arch/arm/configs/omap_h2_1610_defconfig b/trunk/arch/arm/configs/omap_h2_1610_defconfig
index ee3ecbd9002d..05adb0b34e72 100644
--- a/trunk/arch/arm/configs/omap_h2_1610_defconfig
+++ b/trunk/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,19 +1,20 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov 9 18:53:40 2005
+# Linux kernel version: 2.6.17
+# Thu Jun 29 15:25:18 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,26 +30,26 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -56,7 +57,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
@@ -64,6 +64,7 @@ CONFIG_OBSOLETE_MODPARM=y
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -81,16 +82,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -98,11 +109,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
#
# TI OMAP Implementations
@@ -141,6 +147,7 @@ CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_H2=y
# CONFIG_MACH_OMAP_H3 is not set
# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
# CONFIG_MACH_OMAP_GENERIC is not set
#
@@ -177,7 +184,6 @@ CONFIG_ARM_THUMB=y
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -189,6 +195,8 @@ CONFIG_ISA_DMA_API=y
#
CONFIG_PREEMPT=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -249,6 +257,8 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
# CONFIG_APM is not set
#
@@ -259,9 +269,12 @@ CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -278,12 +291,18 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -295,6 +314,11 @@ CONFIG_TCP_CONG_BIC=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -312,7 +336,6 @@ CONFIG_TCP_CONG_BIC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -333,6 +356,12 @@ CONFIG_TCP_CONG_BIC=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -526,6 +555,7 @@ CONFIG_SERIO_SERPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -534,6 +564,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -559,8 +590,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -572,6 +603,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
@@ -579,11 +611,23 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -591,13 +635,23 @@ CONFIG_HWMON=y
#
#
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -607,11 +661,13 @@ CONFIG_HWMON=y
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
@@ -635,7 +691,6 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_RL is not set
#
# Logo configuration
@@ -660,16 +715,15 @@ CONFIG_SOUND=y
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
@@ -680,23 +734,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
#
# File systems
#
@@ -704,14 +753,15 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@@ -741,7 +791,7 @@ CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -843,10 +893,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
# CONFIG_DEBUG_USER is not set
#
diff --git a/trunk/arch/arm/configs/onearm_defconfig b/trunk/arch/arm/configs/onearm_defconfig
index 5401c01caefe..2b4a63be03f7 100644
--- a/trunk/arch/arm/configs/onearm_defconfig
+++ b/trunk/arch/arm/configs/onearm_defconfig
@@ -85,6 +85,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
diff --git a/trunk/arch/arm/configs/trizeps4_defconfig b/trunk/arch/arm/configs/trizeps4_defconfig
new file mode 100644
index 000000000000..a6698dc4f6b9
--- /dev/null
+++ b/trunk/arch/arm/configs/trizeps4_defconfig
@@ -0,0 +1,1579 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Sat Jun 24 22:45:14 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_MACH_TRIZEPS4=y
+CONFIG_MACH_TRIZEPS4_CONXS=y
+# CONFIG_MACH_TRIZEPS4_ANY is not set
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=y
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_TRIZEPS4 is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=y
+CONFIG_MTD_DOCPROBE=y
+CONFIG_MTD_DOCECC=y
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_IDE_PXA_CF=y
+CONFIG_IDE_ARM=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+CONFIG_AIRO_CS=m
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_UCB1400=y
+CONFIG_UCB1400_TS=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+CONFIG_USB_TOUCHSCREEN=m
+# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
+# CONFIG_USB_TOUCHSCREEN_3M is not set
+# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_SECLVL is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
diff --git a/trunk/arch/arm/kernel/Makefile b/trunk/arch/arm/kernel/Makefile
index 7cffbaef064b..f0c0cdb1c183 100644
--- a/trunk/arch/arm/kernel/Makefile
+++ b/trunk/arch/arm/kernel/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
-obj-$(CONFIG_IWMMXT) += iwmmxt.o
+obj-$(CONFIG_IWMMXT) += iwmmxt.o iwmmxt-notifier.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/trunk/arch/arm/kernel/asm-offsets.c b/trunk/arch/arm/kernel/asm-offsets.c
index 447ede5143a8..cc2d58d028e1 100644
--- a/trunk/arch/arm/kernel/asm-offsets.c
+++ b/trunk/arch/arm/kernel/asm-offsets.c
@@ -105,6 +105,7 @@ int main(void)
BLANK();
DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list));
DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush));
- DEFINE(PROCINFO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mmu_flags));
+ DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
+ DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags));
return 0;
}
diff --git a/trunk/arch/arm/kernel/ecard.c b/trunk/arch/arm/kernel/ecard.c
index 68a257666d95..b9a74a741d00 100644
--- a/trunk/arch/arm/kernel/ecard.c
+++ b/trunk/arch/arm/kernel/ecard.c
@@ -619,7 +619,7 @@ ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg
ecard_t *ec = slot_to_ecard(slot);
if (ec->claimed) {
- struct irqdesc *d = irqdesc + ec->irq;
+ struct irq_desc *d = irq_desc + ec->irq;
/*
* this ugly code is so that we can operate a
* prioritorising system:
@@ -883,7 +883,7 @@ static ssize_t ecard_show_resources(struct device *dev, struct device_attribute
int i;
for (i = 0; i < ECARD_NUM_RESOURCES; i++)
- str += sprintf(str, "%08lx %08lx %08lx\n",
+ str += sprintf(str, "%08x %08x %08lx\n",
ec->resource[i].start,
ec->resource[i].end,
ec->resource[i].flags);
diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S
index 26f197afd204..7ea5f01dfc7b 100644
--- a/trunk/arch/arm/kernel/entry-armv.S
+++ b/trunk/arch/arm/kernel/entry-armv.S
@@ -589,9 +589,7 @@ ENTRY(__switch_to)
#ifdef CONFIG_MMU
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
#endif
-#if defined(CONFIG_IWMMXT)
- bl iwmmxt_task_switch
-#elif defined(CONFIG_CPU_XSCALE)
+#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
add r4, r2, #TI_CPU_DOMAIN + 40 @ cpu_context_save->extra
ldmib r4, {r4, r5}
mar acc0, r4, r5
diff --git a/trunk/arch/arm/kernel/fiq.c b/trunk/arch/arm/kernel/fiq.c
index 1ec3f7faa259..e8e90346f11c 100644
--- a/trunk/arch/arm/kernel/fiq.c
+++ b/trunk/arch/arm/kernel/fiq.c
@@ -38,6 +38,7 @@
#include
#include
#include
+#include
#include
#include
diff --git a/trunk/arch/arm/kernel/head.S b/trunk/arch/arm/kernel/head.S
index 518b80cd87de..2242f5f7cb7d 100644
--- a/trunk/arch/arm/kernel/head.S
+++ b/trunk/arch/arm/kernel/head.S
@@ -220,7 +220,7 @@ __create_page_tables:
teq r0, r6
bne 1b
- ldr r7, [r10, #PROCINFO_MMUFLAGS] @ mmuflags
+ ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping for first MB of kernel to
@@ -271,8 +271,7 @@ __create_page_tables:
#endif
#ifdef CONFIG_DEBUG_LL
- bic r7, r7, #0x0c @ turn off cacheable
- @ and bufferable bits
+ ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
diff --git a/trunk/arch/arm/kernel/irq.c b/trunk/arch/arm/kernel/irq.c
index 4d31cf8d02d5..c3d4e94ef5bf 100644
--- a/trunk/arch/arm/kernel/irq.c
+++ b/trunk/arch/arm/kernel/irq.c
@@ -26,6 +26,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -37,28 +38,9 @@
#include
#include
-#include
#include
-#include
#include
-/*
- * Maximum IRQ count. Currently, this is arbitary. However, it should
- * not be set too low to prevent false triggering. Conversely, if it
- * is set too high, then you could miss a stuck IRQ.
- *
- * Maybe we ought to set a timer and re-enable the IRQ at a later time?
- */
-#define MAX_IRQ_CNT 100000
-
-static int noirqdebug __read_mostly;
-static volatile unsigned long irq_err_count;
-static DEFINE_SPINLOCK(irq_controller_lock);
-static LIST_HEAD(irq_pending);
-
-struct irqdesc irq_desc[NR_IRQS];
-void (*init_arch_irq)(void) __initdata = NULL;
-
/*
* No architecture-specific irq_finish function defined in arm/arch/irqs.h.
*/
@@ -66,163 +48,8 @@ void (*init_arch_irq)(void) __initdata = NULL;
#define irq_finish(irq) do { } while (0)
#endif
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
-irqreturn_t no_action(int irq, void *dev_id, struct pt_regs *regs)
-{
- return IRQ_NONE;
-}
-
-void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- irq_err_count++;
- printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
-}
-
-static struct irqchip bad_chip = {
- .ack = dummy_mask_unmask_irq,
- .mask = dummy_mask_unmask_irq,
- .unmask = dummy_mask_unmask_irq,
-};
-
-static struct irqdesc bad_irq_desc = {
- .chip = &bad_chip,
- .handle = do_bad_IRQ,
- .pend = LIST_HEAD_INIT(bad_irq_desc.pend),
- .disable_depth = 1,
-};
-
-#ifdef CONFIG_SMP
-void synchronize_irq(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
-
- while (desc->running)
- barrier();
-}
-EXPORT_SYMBOL(synchronize_irq);
-
-#define smp_set_running(desc) do { desc->running = 1; } while (0)
-#define smp_clear_running(desc) do { desc->running = 0; } while (0)
-#else
-#define smp_set_running(desc) do { } while (0)
-#define smp_clear_running(desc) do { } while (0)
-#endif
-
-/**
- * disable_irq_nosync - disable an irq without waiting
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Enables and disables
- * are nested. We do this lazily.
- *
- * This function may be called from IRQ context.
- */
-void disable_irq_nosync(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- desc->disable_depth++;
- list_del_init(&desc->pend);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(disable_irq_nosync);
-
-/**
- * disable_irq - disable an irq and wait for completion
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Enables and disables
- * are nested. This functions waits for any pending IRQ
- * handlers for this interrupt to complete before returning.
- * If you use this function while holding a resource the IRQ
- * handler may need you will deadlock.
- *
- * This function may be called - with care - from IRQ context.
- */
-void disable_irq(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
-
- disable_irq_nosync(irq);
- if (desc->action)
- synchronize_irq(irq);
-}
-EXPORT_SYMBOL(disable_irq);
-
-/**
- * enable_irq - enable interrupt handling on an irq
- * @irq: Interrupt to enable
- *
- * Re-enables the processing of interrupts on this IRQ line.
- * Note that this may call the interrupt handler, so you may
- * get unexpected results if you hold IRQs disabled.
- *
- * This function may be called from IRQ context.
- */
-void enable_irq(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (unlikely(!desc->disable_depth)) {
- printk("enable_irq(%u) unbalanced from %p\n", irq,
- __builtin_return_address(0));
- } else if (!--desc->disable_depth) {
- desc->probing = 0;
- desc->chip->unmask(irq);
-
- /*
- * If the interrupt is waiting to be processed,
- * try to re-run it. We can't directly run it
- * from here since the caller might be in an
- * interrupt-protected region.
- */
- if (desc->pending && list_empty(&desc->pend)) {
- desc->pending = 0;
- if (!desc->chip->retrigger ||
- desc->chip->retrigger(irq))
- list_add(&desc->pend, &irq_pending);
- }
- }
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(enable_irq);
-
-/*
- * Enable wake on selected irq
- */
-void enable_irq_wake(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (desc->chip->set_wake)
- desc->chip->set_wake(irq, 1);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(enable_irq_wake);
-
-void disable_irq_wake(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (desc->chip->set_wake)
- desc->chip->set_wake(irq, 0);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(disable_irq_wake);
+void (*init_arch_irq)(void) __initdata = NULL;
+unsigned long irq_err_count;
int show_interrupts(struct seq_file *p, void *v)
{
@@ -242,8 +69,8 @@ int show_interrupts(struct seq_file *p, void *v)
}
if (i < NR_IRQS) {
- spin_lock_irqsave(&irq_controller_lock, flags);
- action = irq_desc[i].action;
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
if (!action)
goto unlock;
@@ -256,7 +83,7 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
unlock:
- spin_unlock_irqrestore(&irq_controller_lock, flags);
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
#ifdef CONFIG_ARCH_ACORN
show_fiq_list(p, v);
@@ -270,267 +97,11 @@ int show_interrupts(struct seq_file *p, void *v)
return 0;
}
-/*
- * IRQ lock detection.
- *
- * Hopefully, this should get us out of a few locked situations.
- * However, it may take a while for this to happen, since we need
- * a large number if IRQs to appear in the same jiffie with the
- * same instruction pointer (or within 2 instructions).
- */
-static int check_irq_lock(struct irqdesc *desc, int irq, struct pt_regs *regs)
-{
- unsigned long instr_ptr = instruction_pointer(regs);
-
- if (desc->lck_jif == jiffies &&
- desc->lck_pc >= instr_ptr && desc->lck_pc < instr_ptr + 8) {
- desc->lck_cnt += 1;
-
- if (desc->lck_cnt > MAX_IRQ_CNT) {
- printk(KERN_ERR "IRQ LOCK: IRQ%d is locking the system, disabled\n", irq);
- return 1;
- }
- } else {
- desc->lck_cnt = 0;
- desc->lck_pc = instruction_pointer(regs);
- desc->lck_jif = jiffies;
- }
- return 0;
-}
-
-static void
-report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int ret)
-{
- static int count = 100;
- struct irqaction *action;
-
- if (noirqdebug)
- return;
-
- if (ret != IRQ_HANDLED && ret != IRQ_NONE) {
- if (!count)
- return;
- count--;
- printk("irq%u: bogus retval mask %x\n", irq, ret);
- } else {
- desc->irqs_unhandled++;
- if (desc->irqs_unhandled <= 99900)
- return;
- desc->irqs_unhandled = 0;
- printk("irq%u: nobody cared\n", irq);
- }
- show_regs(regs);
- dump_stack();
- printk(KERN_ERR "handlers:");
- action = desc->action;
- do {
- printk("\n" KERN_ERR "[<%p>]", action->handler);
- print_symbol(" (%s)", (unsigned long)action->handler);
- action = action->next;
- } while (action);
- printk("\n");
-}
-
-static int
-__do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
-{
- unsigned int status;
- int ret, retval = 0;
-
- spin_unlock(&irq_controller_lock);
-
-#ifdef CONFIG_NO_IDLE_HZ
- if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
- spin_lock(&system_timer->dyn_tick->lock);
- if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
- system_timer->dyn_tick->handler(irq, 0, regs);
- spin_unlock(&system_timer->dyn_tick->lock);
- }
-#endif
-
- if (!(action->flags & SA_INTERRUPT))
- local_irq_enable();
-
- status = 0;
- do {
- ret = action->handler(irq, action->dev_id, regs);
- if (ret == IRQ_HANDLED)
- status |= action->flags;
- retval |= ret;
- action = action->next;
- } while (action);
-
- if (status & SA_SAMPLE_RANDOM)
- add_interrupt_randomness(irq);
-
- spin_lock_irq(&irq_controller_lock);
-
- return retval;
-}
-
-/*
- * This is for software-decoded IRQs. The caller is expected to
- * handle the ack, clear, mask and unmask issues.
- */
-void
-do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- struct irqaction *action;
- const unsigned int cpu = smp_processor_id();
-
- desc->triggered = 1;
-
- kstat_cpu(cpu).irqs[irq]++;
-
- smp_set_running(desc);
-
- action = desc->action;
- if (action) {
- int ret = __do_irq(irq, action, regs);
- if (ret != IRQ_HANDLED)
- report_bad_irq(irq, regs, desc, ret);
- }
-
- smp_clear_running(desc);
-}
-
-/*
- * Most edge-triggered IRQ implementations seem to take a broken
- * approach to this. Hence the complexity.
- */
-void
-do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- const unsigned int cpu = smp_processor_id();
-
- desc->triggered = 1;
-
- /*
- * If we're currently running this IRQ, or its disabled,
- * we shouldn't process the IRQ. Instead, turn on the
- * hardware masks.
- */
- if (unlikely(desc->running || desc->disable_depth))
- goto running;
-
- /*
- * Acknowledge and clear the IRQ, but don't mask it.
- */
- desc->chip->ack(irq);
-
- /*
- * Mark the IRQ currently in progress.
- */
- desc->running = 1;
-
- kstat_cpu(cpu).irqs[irq]++;
-
- do {
- struct irqaction *action;
-
- action = desc->action;
- if (!action)
- break;
-
- if (desc->pending && !desc->disable_depth) {
- desc->pending = 0;
- desc->chip->unmask(irq);
- }
-
- __do_irq(irq, action, regs);
- } while (desc->pending && !desc->disable_depth);
-
- desc->running = 0;
-
- /*
- * If we were disabled or freed, shut down the handler.
- */
- if (likely(desc->action && !check_irq_lock(desc, irq, regs)))
- return;
-
- running:
- /*
- * We got another IRQ while this one was masked or
- * currently running. Delay it.
- */
- desc->pending = 1;
- desc->chip->mask(irq);
- desc->chip->ack(irq);
-}
-
-/*
- * Level-based IRQ handler. Nice and simple.
- */
-void
-do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- struct irqaction *action;
- const unsigned int cpu = smp_processor_id();
-
- desc->triggered = 1;
-
- /*
- * Acknowledge, clear _AND_ disable the interrupt.
- */
- desc->chip->ack(irq);
-
- if (likely(!desc->disable_depth)) {
- kstat_cpu(cpu).irqs[irq]++;
-
- smp_set_running(desc);
-
- /*
- * Return with this interrupt masked if no action
- */
- action = desc->action;
- if (action) {
- int ret = __do_irq(irq, desc->action, regs);
-
- if (ret != IRQ_HANDLED)
- report_bad_irq(irq, regs, desc, ret);
-
- if (likely(!desc->disable_depth &&
- !check_irq_lock(desc, irq, regs)))
- desc->chip->unmask(irq);
- }
-
- smp_clear_running(desc);
- }
-}
-
-static void do_pending_irqs(struct pt_regs *regs)
-{
- struct list_head head, *l, *n;
-
- do {
- struct irqdesc *desc;
-
- /*
- * First, take the pending interrupts off the list.
- * The act of calling the handlers may add some IRQs
- * back onto the list.
- */
- head = irq_pending;
- INIT_LIST_HEAD(&irq_pending);
- head.next->prev = &head;
- head.prev->next = &head;
-
- /*
- * Now run each entry. We must delete it from our
- * list before calling the handler.
- */
- list_for_each_safe(l, n, &head) {
- desc = list_entry(l, struct irqdesc, pend);
- list_del_init(&desc->pend);
- desc_handle_irq(desc - irq_desc, desc, regs);
- }
-
- /*
- * The list must be empty.
- */
- BUG_ON(!list_empty(&head));
- } while (!list_empty(&irq_pending));
-}
+/* Handle bad interrupts */
+static struct irq_desc bad_irq_desc = {
+ .handle_irq = handle_bad_irq,
+ .lock = SPIN_LOCK_UNLOCKED
+};
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
@@ -549,96 +120,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
desc = &bad_irq_desc;
irq_enter();
- spin_lock(&irq_controller_lock);
- desc_handle_irq(irq, desc, regs);
- /*
- * Now re-run any pending interrupts.
- */
- if (!list_empty(&irq_pending))
- do_pending_irqs(regs);
+ desc_handle_irq(irq, desc, regs);
+ /* AT91 specific workaround */
irq_finish(irq);
- spin_unlock(&irq_controller_lock);
irq_exit();
}
-void __set_irq_handler(unsigned int irq, irq_handler_t handle, int is_chained)
-{
- struct irqdesc *desc;
- unsigned long flags;
-
- if (irq >= NR_IRQS) {
- printk(KERN_ERR "Trying to install handler for IRQ%d\n", irq);
- return;
- }
-
- if (handle == NULL)
- handle = do_bad_IRQ;
-
- desc = irq_desc + irq;
-
- if (is_chained && desc->chip == &bad_chip)
- printk(KERN_WARNING "Trying to install chained handler for IRQ%d\n", irq);
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (handle == do_bad_IRQ) {
- desc->chip->mask(irq);
- desc->chip->ack(irq);
- desc->disable_depth = 1;
- }
- desc->handle = handle;
- if (handle != do_bad_IRQ && is_chained) {
- desc->valid = 0;
- desc->probe_ok = 0;
- desc->disable_depth = 0;
- desc->chip->unmask(irq);
- }
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-void set_irq_chip(unsigned int irq, struct irqchip *chip)
-{
- struct irqdesc *desc;
- unsigned long flags;
-
- if (irq >= NR_IRQS) {
- printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
- return;
- }
-
- if (chip == NULL)
- chip = &bad_chip;
-
- desc = irq_desc + irq;
- spin_lock_irqsave(&irq_controller_lock, flags);
- desc->chip = chip;
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int set_irq_type(unsigned int irq, unsigned int type)
-{
- struct irqdesc *desc;
- unsigned long flags;
- int ret = -ENXIO;
-
- if (irq >= NR_IRQS) {
- printk(KERN_ERR "Trying to set irq type for IRQ%d\n", irq);
- return -ENODEV;
- }
-
- desc = irq_desc + irq;
- if (desc->chip->set_type) {
- spin_lock_irqsave(&irq_controller_lock, flags);
- ret = desc->chip->set_type(irq, type);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(set_irq_type);
-
void set_irq_flags(unsigned int irq, unsigned int iflags)
{
struct irqdesc *desc;
@@ -650,421 +140,32 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
}
desc = irq_desc + irq;
- spin_lock_irqsave(&irq_controller_lock, flags);
- desc->valid = (iflags & IRQF_VALID) != 0;
- desc->probe_ok = (iflags & IRQF_PROBE) != 0;
- desc->noautoenable = (iflags & IRQF_NOAUTOEN) != 0;
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int setup_irq(unsigned int irq, struct irqaction *new)
-{
- int shared = 0;
- struct irqaction *old, **p;
- unsigned long flags;
- struct irqdesc *desc;
-
- /*
- * Some drivers like serial.c use request_irq() heavily,
- * so we have to be careful not to interfere with a
- * running system.
- */
- if (new->flags & SA_SAMPLE_RANDOM) {
- /*
- * This function might sleep, we want to call it first,
- * outside of the atomic block.
- * Yes, this might clear the entropy pool if the wrong
- * driver is attempted to be loaded, without actually
- * installing a new handler, but is this really a problem,
- * only the sysadmin is able to do this.
- */
- rand_initialize_irq(irq);
- }
-
- /*
- * The following block of code has to be executed atomically
- */
- desc = irq_desc + irq;
- spin_lock_irqsave(&irq_controller_lock, flags);
- p = &desc->action;
- if ((old = *p) != NULL) {
- /*
- * Can't share interrupts unless both agree to and are
- * the same type.
- */
- if (!(old->flags & new->flags & SA_SHIRQ) ||
- (~old->flags & new->flags) & SA_TRIGGER_MASK) {
- spin_unlock_irqrestore(&irq_controller_lock, flags);
- return -EBUSY;
- }
-
- /* add new interrupt at end of irq queue */
- do {
- p = &old->next;
- old = *p;
- } while (old);
- shared = 1;
- }
-
- *p = new;
-
- if (!shared) {
- desc->probing = 0;
- desc->running = 0;
- desc->pending = 0;
- desc->disable_depth = 1;
-
- if (new->flags & SA_TRIGGER_MASK &&
- desc->chip->set_type) {
- unsigned int type = new->flags & SA_TRIGGER_MASK;
- desc->chip->set_type(irq, type);
- }
-
- if (!desc->noautoenable) {
- desc->disable_depth = 0;
- desc->chip->unmask(irq);
- }
- }
-
- spin_unlock_irqrestore(&irq_controller_lock, flags);
- return 0;
-}
-
-/**
- * request_irq - allocate an interrupt line
- * @irq: Interrupt line to allocate
- * @handler: Function to be called when the IRQ occurs
- * @irqflags: Interrupt type flags
- * @devname: An ascii name for the claiming device
- * @dev_id: A cookie passed back to the handler function
- *
- * This call allocates interrupt resources and enables the
- * interrupt line and IRQ handling. From the point this
- * call is made your handler function may be invoked. Since
- * your handler function must clear any interrupt the board
- * raises, you must take care both to initialise your hardware
- * and to set up the interrupt handler in the right order.
- *
- * Dev_id must be globally unique. Normally the address of the
- * device data structure is used as the cookie. Since the handler
- * receives this value it makes sense to use it.
- *
- * If your interrupt is shared you must pass a non NULL dev_id
- * as this is required when freeing the interrupt.
- *
- * Flags:
- *
- * SA_SHIRQ Interrupt is shared
- *
- * SA_INTERRUPT Disable local interrupts while processing
- *
- * SA_SAMPLE_RANDOM The interrupt can be used for entropy
- *
- */
-int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
- unsigned long irq_flags, const char * devname, void *dev_id)
-{
- unsigned long retval;
- struct irqaction *action;
-
- if (irq >= NR_IRQS || !irq_desc[irq].valid || !handler ||
- (irq_flags & SA_SHIRQ && !dev_id))
- return -EINVAL;
-
- action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
- if (!action)
- return -ENOMEM;
-
- action->handler = handler;
- action->flags = irq_flags;
- cpus_clear(action->mask);
- action->name = devname;
- action->next = NULL;
- action->dev_id = dev_id;
-
- retval = setup_irq(irq, action);
-
- if (retval)
- kfree(action);
- return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- * free_irq - free an interrupt
- * @irq: Interrupt line to free
- * @dev_id: Device identity to free
- *
- * Remove an interrupt handler. The handler is removed and if the
- * interrupt line is no longer in use by any driver it is disabled.
- * On a shared IRQ the caller must ensure the interrupt is disabled
- * on the card it drives before calling this function.
- *
- * This function must not be called from interrupt context.
- */
-void free_irq(unsigned int irq, void *dev_id)
-{
- struct irqaction * action, **p;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !irq_desc[irq].valid) {
- printk(KERN_ERR "Trying to free IRQ%d\n",irq);
- dump_stack();
- return;
- }
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- for (p = &irq_desc[irq].action; (action = *p) != NULL; p = &action->next) {
- if (action->dev_id != dev_id)
- continue;
-
- /* Found it - now free it */
- *p = action->next;
- break;
- }
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-
- if (!action) {
- printk(KERN_ERR "Trying to free free IRQ%d\n",irq);
- dump_stack();
- } else {
- synchronize_irq(irq);
- kfree(action);
- }
-}
-
-EXPORT_SYMBOL(free_irq);
-
-static DECLARE_MUTEX(probe_sem);
-
-/* Start the interrupt probing. Unlike other architectures,
- * we don't return a mask of interrupts from probe_irq_on,
- * but return the number of interrupts enabled for the probe.
- * The interrupts which have been enabled for probing is
- * instead recorded in the irq_desc structure.
- */
-unsigned long probe_irq_on(void)
-{
- unsigned int i, irqs = 0;
- unsigned long delay;
-
- down(&probe_sem);
-
- /*
- * first snaffle up any unassigned but
- * probe-able interrupts
- */
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < NR_IRQS; i++) {
- if (!irq_desc[i].probe_ok || irq_desc[i].action)
- continue;
-
- irq_desc[i].probing = 1;
- irq_desc[i].triggered = 0;
- if (irq_desc[i].chip->set_type)
- irq_desc[i].chip->set_type(i, IRQT_PROBE);
- irq_desc[i].chip->unmask(i);
- irqs += 1;
- }
- spin_unlock_irq(&irq_controller_lock);
-
- /*
- * wait for spurious interrupts to mask themselves out again
- */
- for (delay = jiffies + HZ/10; time_before(jiffies, delay); )
- /* min 100ms delay */;
-
- /*
- * now filter out any obviously spurious interrupts
- */
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < NR_IRQS; i++) {
- if (irq_desc[i].probing && irq_desc[i].triggered) {
- irq_desc[i].probing = 0;
- irqs -= 1;
- }
- }
- spin_unlock_irq(&irq_controller_lock);
-
- return irqs;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-unsigned int probe_irq_mask(unsigned long irqs)
-{
- unsigned int mask = 0, i;
-
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < 16 && i < NR_IRQS; i++)
- if (irq_desc[i].probing && irq_desc[i].triggered)
- mask |= 1 << i;
- spin_unlock_irq(&irq_controller_lock);
-
- up(&probe_sem);
-
- return mask;
-}
-EXPORT_SYMBOL(probe_irq_mask);
-
-/*
- * Possible return values:
- * >= 0 - interrupt number
- * -1 - no interrupt/many interrupts
- */
-int probe_irq_off(unsigned long irqs)
-{
- unsigned int i;
- int irq_found = NO_IRQ;
-
- /*
- * look at the interrupts, and find exactly one
- * that we were probing has been triggered
- */
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < NR_IRQS; i++) {
- if (irq_desc[i].probing &&
- irq_desc[i].triggered) {
- if (irq_found != NO_IRQ) {
- irq_found = NO_IRQ;
- goto out;
- }
- irq_found = i;
- }
- }
-
- if (irq_found == -1)
- irq_found = NO_IRQ;
-out:
- spin_unlock_irq(&irq_controller_lock);
-
- up(&probe_sem);
-
- return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-#ifdef CONFIG_SMP
-static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
-{
- pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
-
- spin_lock_irq(&irq_controller_lock);
- desc->cpu = cpu;
- desc->chip->set_cpu(desc, irq, cpu);
- spin_unlock_irq(&irq_controller_lock);
-}
-
-#ifdef CONFIG_PROC_FS
-static int
-irq_affinity_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct irqdesc *desc = irq_desc + ((int)data);
- int len = cpumask_scnprintf(page, count, desc->affinity);
-
- if (count - len < 2)
- return -EINVAL;
- page[len++] = '\n';
- page[len] = '\0';
-
- return len;
-}
-
-static int
-irq_affinity_write_proc(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- unsigned int irq = (unsigned int)data;
- struct irqdesc *desc = irq_desc + irq;
- cpumask_t affinity, tmp;
- int ret = -EIO;
-
- if (!desc->chip->set_cpu)
- goto out;
-
- ret = cpumask_parse(buffer, count, affinity);
- if (ret)
- goto out;
-
- cpus_and(tmp, affinity, cpu_online_map);
- if (cpus_empty(tmp)) {
- ret = -EINVAL;
- goto out;
- }
-
- desc->affinity = affinity;
- route_irq(desc, irq, first_cpu(tmp));
- ret = count;
-
- out:
- return ret;
-}
-#endif
-#endif
-
-void __init init_irq_proc(void)
-{
-#if defined(CONFIG_SMP) && defined(CONFIG_PROC_FS)
- struct proc_dir_entry *dir;
- int irq;
-
- dir = proc_mkdir("irq", NULL);
- if (!dir)
- return;
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- struct proc_dir_entry *entry;
- struct irqdesc *desc;
- char name[16];
-
- desc = irq_desc + irq;
- memset(name, 0, sizeof(name));
- snprintf(name, sizeof(name) - 1, "%u", irq);
-
- desc->procdir = proc_mkdir(name, dir);
- if (!desc->procdir)
- continue;
-
- entry = create_proc_entry("smp_affinity", 0600, desc->procdir);
- if (entry) {
- entry->nlink = 1;
- entry->data = (void *)irq;
- entry->read_proc = irq_affinity_read_proc;
- entry->write_proc = irq_affinity_write_proc;
- }
- }
-#endif
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ if (iflags & IRQF_VALID)
+ desc->status &= ~IRQ_NOREQUEST;
+ if (iflags & IRQF_PROBE)
+ desc->status &= ~IRQ_NOPROBE;
+ if (!(iflags & IRQF_NOAUTOEN))
+ desc->status &= ~IRQ_NOAUTOEN;
+ spin_unlock_irqrestore(&desc->lock, flags);
}
void __init init_IRQ(void)
{
- struct irqdesc *desc;
int irq;
+ for (irq = 0; irq < NR_IRQS; irq++)
+ irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_DELAYED_DISABLE |
+ IRQ_NOPROBE;
+
#ifdef CONFIG_SMP
bad_irq_desc.affinity = CPU_MASK_ALL;
bad_irq_desc.cpu = smp_processor_id();
#endif
-
- for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
- *desc = bad_irq_desc;
- INIT_LIST_HEAD(&desc->pend);
- }
-
init_arch_irq();
}
-static int __init noirqdebug_setup(char *str)
-{
- noirqdebug = 1;
- return 1;
-}
-
-__setup("noirqdebug", noirqdebug_setup);
-
#ifdef CONFIG_HOTPLUG_CPU
/*
* The CPU has been marked offline. Migrate IRQs off this CPU. If
diff --git a/trunk/arch/arm/kernel/iwmmxt-notifier.c b/trunk/arch/arm/kernel/iwmmxt-notifier.c
new file mode 100644
index 000000000000..44a86c33796e
--- /dev/null
+++ b/trunk/arch/arm/kernel/iwmmxt-notifier.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/kernel/iwmmxt-notifier.c
+ *
+ * XScale iWMMXt (Concan) context switching and handling
+ *
+ * Initial code:
+ * Copyright (c) 2003, Intel Corporation
+ *
+ * Full lazy switching support, optimizations and more, by Nicolas Pitre
+ * Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+ struct thread_info *thread = t;
+
+ switch (cmd) {
+ case THREAD_NOTIFY_FLUSH:
+ /*
+ * flush_thread() zeroes thread->fpstate, so no need
+ * to do anything here.
+ *
+ * FALLTHROUGH: Ensure we don't try to overwrite our newly
+ * initialised state information on the first fault.
+ */
+
+ case THREAD_NOTIFY_RELEASE:
+ iwmmxt_task_release(thread);
+ break;
+
+ case THREAD_NOTIFY_SWITCH:
+ iwmmxt_task_switch(thread);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+ .notifier_call = iwmmxt_do,
+};
+
+static int __init iwmmxt_init(void)
+{
+ thread_register_notifier(&iwmmxt_notifier_block);
+
+ return 0;
+}
+
+late_initcall(iwmmxt_init);
diff --git a/trunk/arch/arm/kernel/iwmmxt.S b/trunk/arch/arm/kernel/iwmmxt.S
index a3bae95e536c..b63b528f22a6 100644
--- a/trunk/arch/arm/kernel/iwmmxt.S
+++ b/trunk/arch/arm/kernel/iwmmxt.S
@@ -271,30 +271,27 @@ ENTRY(iwmmxt_task_restore)
/*
* Concan handling on task switch
*
- * r0 = previous task_struct pointer (must be preserved)
- * r1 = previous thread_info pointer
- * r2 = next thread_info pointer (must be preserved)
+ * r0 = next thread_info pointer
*
- * Called only from __switch_to with task preemption disabled.
- * No need to care about preserving r4 and above.
+ * Called only from the iwmmxt notifier with task preemption disabled.
*/
ENTRY(iwmmxt_task_switch)
- mrc p15, 0, r4, c15, c1, 0
- tst r4, #0x3 @ CP0 and CP1 accessible?
+ mrc p15, 0, r1, c15, c1, 0
+ tst r1, #0x3 @ CP0 and CP1 accessible?
bne 1f @ yes: block them for next task
- ldr r5, =concan_owner
- add r6, r2, #TI_IWMMXT_STATE @ get next task Concan save area
- ldr r5, [r5] @ get current Concan owner
- teq r5, r6 @ next task owns it?
+ ldr r2, =concan_owner
+ add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area
+ ldr r2, [r2] @ get current Concan owner
+ teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
-1: eor r4, r4, #3 @ flip Concan access
- mcr p15, 0, r4, c15, c1, 0
+1: eor r1, r1, #3 @ flip Concan access
+ mcr p15, 0, r1, c15, c1, 0
- mrc p15, 0, r4, c2, c0, 0
- sub pc, lr, r4, lsr #32 @ cpwait and return
+ mrc p15, 0, r1, c2, c0, 0
+ sub pc, lr, r1, lsr #32 @ cpwait and return
/*
* Remove Concan ownership of given task
diff --git a/trunk/arch/arm/kernel/process.c b/trunk/arch/arm/kernel/process.c
index c3258b763c5d..3079535afccd 100644
--- a/trunk/arch/arm/kernel/process.c
+++ b/trunk/arch/arm/kernel/process.c
@@ -352,9 +352,6 @@ void flush_thread(void)
memset(&thread->fpstate, 0, sizeof(union fp_state));
thread_notify(THREAD_NOTIFY_FLUSH, thread);
-#if defined(CONFIG_IWMMXT)
- iwmmxt_task_release(thread);
-#endif
}
void release_thread(struct task_struct *dead_task)
@@ -362,9 +359,6 @@ void release_thread(struct task_struct *dead_task)
struct thread_info *thread = task_thread_info(dead_task);
thread_notify(THREAD_NOTIFY_RELEASE, thread);
-#if defined(CONFIG_IWMMXT)
- iwmmxt_task_release(thread);
-#endif
}
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
diff --git a/trunk/arch/arm/kernel/setup.c b/trunk/arch/arm/kernel/setup.c
index 7447a1987322..ed1c4d62d999 100644
--- a/trunk/arch/arm/kernel/setup.c
+++ b/trunk/arch/arm/kernel/setup.c
@@ -344,9 +344,9 @@ static void __init setup_processor(void)
cpu_cache = *list->cache;
#endif
- printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
+ printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
cpu_name, processor_id, (int)processor_id & 15,
- proc_arch[cpu_architecture()]);
+ proc_arch[cpu_architecture()], cr_alignment);
sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
diff --git a/trunk/arch/arm/mach-aaec2000/core.c b/trunk/arch/arm/mach-aaec2000/core.c
index aa01d6753d6e..baa997c857dc 100644
--- a/trunk/arch/arm/mach-aaec2000/core.c
+++ b/trunk/arch/arm/mach-aaec2000/core.c
@@ -142,7 +142,7 @@ aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction aaec2000_timer_irq = {
.name = "AAEC-2000 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = aaec2000_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-at91rm9200/Kconfig b/trunk/arch/arm/mach-at91rm9200/Kconfig
index 70d402f76ce5..2f85e8693b1b 100644
--- a/trunk/arch/arm/mach-at91rm9200/Kconfig
+++ b/trunk/arch/arm/mach-at91rm9200/Kconfig
@@ -1,6 +1,21 @@
-if ARCH_AT91RM9200
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processors"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
-menu "AT91RM9200 Implementations"
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
@@ -8,58 +23,87 @@ config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
depends on ARCH_AT91RM9200
help
- Select this if you are using Ajeco's 1ARM Single Board Computer
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-DK Development board
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+
config MACH_CSB337
- bool "Cogent CSB337 board"
+ bool "Cogent CSB337"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB337 board
+ Select this if you are using Cogent's CSB337 board.
+
config MACH_CSB637
- bool "Cogent CSB637 board"
+ bool "Cogent CSB637"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB637 board
+ Select this if you are using Cogent's CSB637 board.
+
config MACH_CARMEVA
- bool "Conitec's ARM&EVA"
+ bool "Conitec ARM&EVA"
depends on ARCH_AT91RM9200
help
- Select this if you are using Conitec's AT91RM9200-MCU-Module
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+
-config MACH_KB9200
- bool "KwikByte's KB920x"
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
depends on ARCH_AT91RM9200
help
- Select this if you are using KwikByte's KB920x board
+ Select this if you are using Embest's ATEB9200 board.
+
-config MACH_ATEB9200
- bool "Embest's ATEB9200"
+config MACH_KB9200
+ bool "KwikByte KB920x"
depends on ARCH_AT91RM9200
help
- Select this if you are using Embest's ATEB9200 board
+ Select this if you are using KwikByte's KB920x board.
+
config MACH_KAFA
bool "Sperry-Sun KAFA board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Sperry-Sun's KAFA board
+ Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+endif
+
+# ----------------------------------------------------------
-comment "AT91RM9200 Feature Selections"
+comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
diff --git a/trunk/arch/arm/mach-at91rm9200/Makefile b/trunk/arch/arm/mach-at91rm9200/Makefile
index 82db957322df..c174805c24e5 100644
--- a/trunk/arch/arm/mach-at91rm9200/Makefile
+++ b/trunk/arch/arm/mach-at91rm9200/Makefile
@@ -2,14 +2,19 @@
# Makefile for the linux kernel.
#
-obj-y := clock.o irq.o time.o gpio.o common.o devices.o
+obj-y := clock.o irq.o gpio.o devices.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_PM) += pm.o
-# Board-specific support
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_ARCH_AT91SAM9260) +=
+obj-$(CONFIG_ARCH_AT91SAM9261) +=
+
+# AT91RM9200 Board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
@@ -20,6 +25,10 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
+# AT91SAM9260 board-specific support
+
+# AT91SAM9261 board-specific support
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
diff --git a/trunk/arch/arm/mach-at91rm9200/common.c b/trunk/arch/arm/mach-at91rm9200/at91rm9200.c
similarity index 98%
rename from trunk/arch/arm/mach-at91rm9200/common.c
rename to trunk/arch/arm/mach-at91rm9200/at91rm9200.c
index cc55f4c28d95..7e1d072bdd80 100644
--- a/trunk/arch/arm/mach-at91rm9200/common.c
+++ b/trunk/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/common.c
+ * arch/arm/mach-at91rm9200/at91rm9200.c
*
* Copyright (C) 2005 SAN People
*
diff --git a/trunk/arch/arm/mach-at91rm9200/time.c b/trunk/arch/arm/mach-at91rm9200/at91rm9200_time.c
similarity index 96%
rename from trunk/arch/arm/mach-at91rm9200/time.c
rename to trunk/arch/arm/mach-at91rm9200/at91rm9200_time.c
index f2f080350ccb..a92a8622c78a 100644
--- a/trunk/arch/arm/mach-at91rm9200/time.c
+++ b/trunk/arch/arm/mach-at91rm9200/at91rm9200_time.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/time.c
+ * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
@@ -21,13 +21,13 @@
#include
#include
+#include
#include
#include
#include
#include
#include
-#include
#include
static unsigned long last_crtr;
@@ -85,7 +85,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
- .flags = SA_SHIRQ | SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
.handler = at91rm9200_timer_interrupt
};
diff --git a/trunk/arch/arm/mach-at91rm9200/gpio.c b/trunk/arch/arm/mach-at91rm9200/gpio.c
index 83c34747087b..5783c282ae7b 100644
--- a/trunk/arch/arm/mach-at91rm9200/gpio.c
+++ b/trunk/arch/arm/mach-at91rm9200/gpio.c
@@ -10,12 +10,13 @@
*/
#include
+#include
+#include
#include
#include
#include
#include
-#include
#include
#include
@@ -340,7 +341,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
void __iomem *pio;
u32 isr;
- pio = desc->base;
+ pio = get_irq_chip_data(irq);
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
@@ -350,12 +351,12 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
if (!isr)
break;
- pin = (unsigned) desc->data;
+ pin = (unsigned) get_irq_data(irq);
gpio = &irq_desc[pin];
while (isr) {
if (isr & 1) {
- if (unlikely(gpio->disable_depth)) {
+ if (unlikely(gpio->depth)) {
/*
* The core ARM interrupt handler lazily disables IRQs so
* another IRQ must be generated before it actually gets
@@ -364,7 +365,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
gpio_irq_mask(pin);
}
else
- gpio->handle(pin, gpio, regs);
+ desc_handle_irq(pin, gpio, regs);
}
pin++;
gpio++;
diff --git a/trunk/arch/arm/mach-clps711x/time.c b/trunk/arch/arm/mach-clps711x/time.c
index 1a23f0dcd4b8..a071eac4a30a 100644
--- a/trunk/arch/arm/mach-clps711x/time.c
+++ b/trunk/arch/arm/mach-clps711x/time.c
@@ -19,6 +19,7 @@
#include
#include
#include
+#include
#include
#include
@@ -57,7 +58,7 @@ p720t_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction clps711x_timer_irq = {
.name = "CLPS711x Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = p720t_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-clps7500/core.c b/trunk/arch/arm/mach-clps7500/core.c
index 5b12cab0e691..92eaebdd5606 100644
--- a/trunk/arch/arm/mach-clps7500/core.c
+++ b/trunk/arch/arm/mach-clps7500/core.c
@@ -9,6 +9,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -315,7 +316,7 @@ clps7500_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction clps7500_timer_irq = {
.name = "CLPS7500 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = clps7500_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-ebsa110/core.c b/trunk/arch/arm/mach-ebsa110/core.c
index 6d620d8268cc..70dd12ef3c40 100644
--- a/trunk/arch/arm/mach-ebsa110/core.c
+++ b/trunk/arch/arm/mach-ebsa110/core.c
@@ -199,7 +199,7 @@ ebsa110_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction ebsa110_timer_irq = {
.name = "EBSA110 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ebsa110_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-ep93xx/Kconfig b/trunk/arch/arm/mach-ep93xx/Kconfig
index e15e4c54a253..f1b740083aee 100644
--- a/trunk/arch/arm/mach-ep93xx/Kconfig
+++ b/trunk/arch/arm/mach-ep93xx/Kconfig
@@ -9,12 +9,24 @@ config CRUNCH
comment "EP93xx Platforms"
+config MACH_EDB9302
+ bool "Support Cirrus Logic EDB9302"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9302 Evaluation Board.
+
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
+config MACH_EDB9315A
+ bool "Support Cirrus Logic EDB9315A"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9315A Evaluation Board.
+
config MACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
help
diff --git a/trunk/arch/arm/mach-ep93xx/Makefile b/trunk/arch/arm/mach-ep93xx/Makefile
index dfa7e2e8a18b..1f5a6b0487ee 100644
--- a/trunk/arch/arm/mach-ep93xx/Makefile
+++ b/trunk/arch/arm/mach-ep93xx/Makefile
@@ -6,6 +6,8 @@ obj-m :=
obj-n :=
obj- :=
+obj-$(CONFIG_MACH_EDB9302) += edb9302.o
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
+obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/trunk/arch/arm/mach-ep93xx/core.c b/trunk/arch/arm/mach-ep93xx/core.c
index 26df3b666b56..a87a784b9201 100644
--- a/trunk/arch/arm/mach-ep93xx/core.c
+++ b/trunk/arch/arm/mach-ep93xx/core.c
@@ -116,7 +116,7 @@ static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction ep93xx_timer_irq = {
.name = "ep93xx timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ep93xx_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-ep93xx/edb9302.c b/trunk/arch/arm/mach-ep93xx/edb9302.c
new file mode 100644
index 000000000000..62a8efd23256
--- /dev/null
+++ b/trunk/arch/arm/mach-ep93xx/edb9302.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302.c
+ * Cirrus Logic EDB9302 support.
+ *
+ * Copyright (C) 2006 George Kashperko
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+static struct physmap_flash_data edb9302_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9302_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9302_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9302_flash_resource,
+};
+
+static void __init edb9302_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9302_flash);
+}
+
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+ /* Maintainer: George Kashperko */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9302_init_machine,
+MACHINE_END
diff --git a/trunk/arch/arm/mach-ep93xx/edb9315a.c b/trunk/arch/arm/mach-ep93xx/edb9315a.c
new file mode 100644
index 000000000000..bfefdaa8f794
--- /dev/null
+++ b/trunk/arch/arm/mach-ep93xx/edb9315a.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+static struct physmap_flash_data edb9315a_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9315a_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315a_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9315a_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9315a_flash_resource,
+};
+
+static void __init edb9315a_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9315a_flash);
+}
+
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0xc0000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9315a_init_machine,
+MACHINE_END
diff --git a/trunk/arch/arm/mach-footbridge/dc21285-timer.c b/trunk/arch/arm/mach-footbridge/dc21285-timer.c
index 14a62d6008fe..2af610811ca4 100644
--- a/trunk/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/trunk/arch/arm/mach-footbridge/dc21285-timer.c
@@ -6,6 +6,7 @@
*/
#include
#include
+#include
#include
@@ -43,7 +44,7 @@ timer1_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction footbridge_timer_irq = {
.name = "Timer1 timer tick",
.handler = timer1_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
/*
diff --git a/trunk/arch/arm/mach-footbridge/dc21285.c b/trunk/arch/arm/mach-footbridge/dc21285.c
index 5dace2597838..607ed1f5b3f8 100644
--- a/trunk/arch/arm/mach-footbridge/dc21285.c
+++ b/trunk/arch/arm/mach-footbridge/dc21285.c
@@ -332,15 +332,15 @@ void __init dc21285_preinit(void)
/*
* We don't care if these fail.
*/
- request_irq(IRQ_PCI_SERR, dc21285_serr_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED,
"PCI system error", &serr_timer);
- request_irq(IRQ_PCI_PERR, dc21285_parity_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED,
"PCI parity error", &perr_timer);
- request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED,
"PCI abort", NULL);
- request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, SA_INTERRUPT,
+ request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED,
"Discard timer", NULL);
- request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED,
"PCI data parity", NULL);
if (cfn_mode) {
diff --git a/trunk/arch/arm/mach-footbridge/isa-irq.c b/trunk/arch/arm/mach-footbridge/isa-irq.c
index e1c43b331d64..87448c2d6baa 100644
--- a/trunk/arch/arm/mach-footbridge/isa-irq.c
+++ b/trunk/arch/arm/mach-footbridge/isa-irq.c
@@ -98,9 +98,22 @@ isa_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
desc_handle_irq(isa_irq, desc, regs);
}
-static struct irqaction irq_cascade = { .handler = no_action, .name = "cascade", };
-static struct resource pic1_resource = { "pic1", 0x20, 0x3f };
-static struct resource pic2_resource = { "pic2", 0xa0, 0xbf };
+static struct irqaction irq_cascade = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+static struct resource pic1_resource = {
+ .name = "pic1",
+ .start = 0x20,
+ .end = 0x3f,
+};
+
+static struct resource pic2_resource = {
+ .name = "pic2",
+ .start = 0xa0,
+ .end = 0xbf,
+};
void __init isa_init_irq(unsigned int host_irq)
{
diff --git a/trunk/arch/arm/mach-footbridge/isa-timer.c b/trunk/arch/arm/mach-footbridge/isa-timer.c
index c1d74f7ab669..c4810a40c8e1 100644
--- a/trunk/arch/arm/mach-footbridge/isa-timer.c
+++ b/trunk/arch/arm/mach-footbridge/isa-timer.c
@@ -6,6 +6,7 @@
*/
#include
#include
+#include
#include
#include
@@ -72,7 +73,7 @@ isa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction isa_timer_irq = {
.name = "ISA timer tick",
.handler = isa_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
static void __init isa_timer_init(void)
diff --git a/trunk/arch/arm/mach-h720x/cpu-h7201.c b/trunk/arch/arm/mach-h720x/cpu-h7201.c
index af9e4a5d5ea7..a9a8255a3a03 100644
--- a/trunk/arch/arm/mach-h720x/cpu-h7201.c
+++ b/trunk/arch/arm/mach-h720x/cpu-h7201.c
@@ -41,7 +41,7 @@ h7201_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction h7201_timer_irq = {
.name = "h7201 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = h7201_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-h720x/cpu-h7202.c b/trunk/arch/arm/mach-h720x/cpu-h7202.c
index a4a7c0125d03..da678d163fd9 100644
--- a/trunk/arch/arm/mach-h720x/cpu-h7202.c
+++ b/trunk/arch/arm/mach-h720x/cpu-h7202.c
@@ -171,7 +171,7 @@ static struct irqchip h7202_timerx_chip = {
static struct irqaction h7202_timer_irq = {
.name = "h7202 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = h7202_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-imx/time.c b/trunk/arch/arm/mach-imx/time.c
index 294b1c450f21..6ed7523c65bb 100644
--- a/trunk/arch/arm/mach-imx/time.c
+++ b/trunk/arch/arm/mach-imx/time.c
@@ -12,6 +12,7 @@
#include
#include
#include
+#include
#include
#include
@@ -71,7 +72,7 @@ imx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction imx_timer_irq = {
.name = "i.MX Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = imx_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-integrator/core.c b/trunk/arch/arm/mach-integrator/core.c
index 576a5e979c00..42021fdfa0c6 100644
--- a/trunk/arch/arm/mach-integrator/core.c
+++ b/trunk/arch/arm/mach-integrator/core.c
@@ -13,6 +13,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -281,7 +282,7 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction integrator_timer_irq = {
.name = "Integrator Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = integrator_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-integrator/time.c b/trunk/arch/arm/mach-integrator/time.c
index bc07f52a6fd7..ee49cf790dab 100644
--- a/trunk/arch/arm/mach-integrator/time.c
+++ b/trunk/arch/arm/mach-integrator/time.c
@@ -125,7 +125,7 @@ static int rtc_probe(struct amba_device *dev, void *id)
xtime.tv_sec = __raw_readl(rtc_base + RTC_DR);
- ret = request_irq(dev->irq[0], arm_rtc_interrupt, SA_INTERRUPT,
+ ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED,
"rtc-pl030", dev);
if (ret)
goto map_out;
diff --git a/trunk/arch/arm/mach-iop3xx/Kconfig b/trunk/arch/arm/mach-iop3xx/Kconfig
index 2bfe8c729f9f..4422f2388607 100644
--- a/trunk/arch/arm/mach-iop3xx/Kconfig
+++ b/trunk/arch/arm/mach-iop3xx/Kconfig
@@ -30,12 +30,15 @@ config MACH_IQ80332
select ARCH_IOP331
help
Say Y here if you want to run your kernel on the Intel IQ80332
- evaluation kit for the IOP332 chipset
+ evaluation kit for the IOP332 chipset.
config ARCH_EP80219
- bool "Enable support for EP80219"
- select ARCH_IOP321
- select ARCH_IQ31244
+ bool "Enable support for EP80219"
+ select ARCH_IOP321
+ select ARCH_IQ31244
+ help
+ Say Y here if you want to run your kernel on the Intel EP80219
+ evaluation kit for the Intel 80219 chipset (a IOP321 variant).
# Which IOP variant are we running?
config ARCH_IOP321
@@ -56,8 +59,8 @@ config IOP331_STEPD
bool "Chip stepping D of the IOP80331 processor or IOP80333"
depends on (ARCH_IOP331)
help
- Say Y here if you have StepD of the IOP80331 or IOP8033
- based platforms.
+ Say Y here if you have StepD of the IOP80331 or IOP8033
+ based platforms.
endmenu
endif
diff --git a/trunk/arch/arm/mach-iop3xx/iop321-time.c b/trunk/arch/arm/mach-iop3xx/iop321-time.c
index d67ac0e5d438..04b1a6f7ebae 100644
--- a/trunk/arch/arm/mach-iop3xx/iop321-time.c
+++ b/trunk/arch/arm/mach-iop3xx/iop321-time.c
@@ -85,7 +85,7 @@ iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction iop321_timer_irq = {
.name = "IOP321 Timer Tick",
.handler = iop321_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
static void __init iop321_timer_init(void)
diff --git a/trunk/arch/arm/mach-iop3xx/iop331-time.c b/trunk/arch/arm/mach-iop3xx/iop331-time.c
index 3c1f0ebbd636..0c09e74c5740 100644
--- a/trunk/arch/arm/mach-iop3xx/iop331-time.c
+++ b/trunk/arch/arm/mach-iop3xx/iop331-time.c
@@ -82,7 +82,7 @@ iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction iop331_timer_irq = {
.name = "IOP331 Timer Tick",
.handler = iop331_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
static void __init iop331_timer_init(void)
diff --git a/trunk/arch/arm/mach-ixp2000/core.c b/trunk/arch/arm/mach-ixp2000/core.c
index 3cfc5aab8259..7f91f689a041 100644
--- a/trunk/arch/arm/mach-ixp2000/core.c
+++ b/trunk/arch/arm/mach-ixp2000/core.c
@@ -19,6 +19,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -223,7 +224,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction ixp2000_timer_irq = {
.name = "IXP2000 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ixp2000_timer_interrupt,
};
@@ -408,7 +409,7 @@ static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, str
for(i = 31; i >= 0; i--) {
if(status & (1 << i)) {
desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
- desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs);
+ desc_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs);
}
}
}
diff --git a/trunk/arch/arm/mach-ixp2000/ixdp2x00.c b/trunk/arch/arm/mach-ixp2000/ixdp2x00.c
index 9b8ded259807..40eef8b36740 100644
--- a/trunk/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/trunk/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -167,7 +167,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long
}
/* Hook into PCI interrupt */
- set_irq_chained_handler(IRQ_IXP2000_PCIB, &ixdp2x00_irq_handler);
+ set_irq_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler);
}
/*************************************************************************
diff --git a/trunk/arch/arm/mach-ixp2000/ixdp2x01.c b/trunk/arch/arm/mach-ixp2000/ixdp2x01.c
index 8477ae1d8f72..7f42366f60d1 100644
--- a/trunk/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/trunk/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -127,7 +127,7 @@ void __init ixdp2x01_init_irq(void)
}
/* Hook into PCI interrupts */
- set_irq_chained_handler(IRQ_IXP2000_PCIB, &ixdp2x01_irq_handler);
+ set_irq_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler);
}
diff --git a/trunk/arch/arm/mach-ixp23xx/core.c b/trunk/arch/arm/mach-ixp23xx/core.c
index 82ad6ef90a38..566a07821c77 100644
--- a/trunk/arch/arm/mach-ixp23xx/core.c
+++ b/trunk/arch/arm/mach-ixp23xx/core.c
@@ -271,7 +271,7 @@ static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *
}
int_desc = irq_desc + irqno;
- int_desc->handle(irqno, int_desc, regs);
+ desc_handle_irq(irqno, int_desc, regs);
desc->chip->unmask(irq);
}
@@ -363,7 +363,7 @@ ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction ixp23xx_timer_irq = {
.name = "IXP23xx Timer Tick",
.handler = ixp23xx_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
void __init ixp23xx_init_timer(void)
diff --git a/trunk/arch/arm/mach-ixp23xx/ixdp2351.c b/trunk/arch/arm/mach-ixp23xx/ixdp2351.c
index bba9d9f08691..37a32e6bcca2 100644
--- a/trunk/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/trunk/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -19,6 +19,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -36,7 +37,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -74,7 +74,7 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
cpld_desc = irq_desc + cpld_irq;
- cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ desc_handle_irq(cpld_irq, cpld_desc, regs);
}
}
@@ -111,7 +111,7 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
cpld_desc = irq_desc + cpld_irq;
- cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ desc_handle_irq(cpld_irq, cpld_desc, regs);
}
}
@@ -158,8 +158,8 @@ void ixdp2351_init_irq(void)
}
}
- set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler);
- set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler);
+ set_irq_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler);
+ set_irq_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler);
}
/*
diff --git a/trunk/arch/arm/mach-ixp4xx/common.c b/trunk/arch/arm/mach-ixp4xx/common.c
index 13c7c629d037..7c25dbd5a181 100644
--- a/trunk/arch/arm/mach-ixp4xx/common.c
+++ b/trunk/arch/arm/mach-ixp4xx/common.c
@@ -287,7 +287,7 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs
static struct irqaction ixp4xx_timer_irq = {
.name = "IXP4xx Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ixp4xx_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-ixp4xx/coyote-pci.c b/trunk/arch/arm/mach-ixp4xx/coyote-pci.c
index e6b7fcd923fa..2cebb2878895 100644
--- a/trunk/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/trunk/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -17,6 +17,7 @@
#include
#include
#include
+#include
#include
#include
diff --git a/trunk/arch/arm/mach-ixp4xx/ixdp425-pci.c b/trunk/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 8b8ca80c9449..d5156c043f0b 100644
--- a/trunk/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/trunk/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -17,6 +17,7 @@
#include
#include
#include
+#include
#include
#include
diff --git a/trunk/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/trunk/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index 526fb6175bc3..ed5270800217 100644
--- a/trunk/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/trunk/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -16,10 +16,10 @@
#include
#include
#include
+#include
#include
#include
-#include
#include
diff --git a/trunk/arch/arm/mach-ixp4xx/nas100d-pci.c b/trunk/arch/arm/mach-ixp4xx/nas100d-pci.c
index 2d3b770d9e82..b8ebaf4a9c8e 100644
--- a/trunk/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/trunk/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -17,6 +17,7 @@
#include
#include
+#include
#include
#include
diff --git a/trunk/arch/arm/mach-ixp4xx/nas100d-power.c b/trunk/arch/arm/mach-ixp4xx/nas100d-power.c
index a3745ed37f9f..81ffcae1f56e 100644
--- a/trunk/arch/arm/mach-ixp4xx/nas100d-power.c
+++ b/trunk/arch/arm/mach-ixp4xx/nas100d-power.c
@@ -17,9 +17,9 @@
*
*/
-#include
-#include
#include
+#include
+#include
#include
#include
@@ -42,7 +42,7 @@ static int __init nas100d_power_init(void)
set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
- SA_INTERRUPT, "NAS100D reset button", NULL) < 0) {
+ IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
NAS100D_RB_IRQ);
diff --git a/trunk/arch/arm/mach-ixp4xx/nslu2-power.c b/trunk/arch/arm/mach-ixp4xx/nslu2-power.c
index 6d38e97142cc..e2a2230b69f0 100644
--- a/trunk/arch/arm/mach-ixp4xx/nslu2-power.c
+++ b/trunk/arch/arm/mach-ixp4xx/nslu2-power.c
@@ -54,7 +54,7 @@ static int __init nslu2_power_init(void)
set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
- SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
+ IRQF_DISABLED, "NSLU2 reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
NSLU2_RB_IRQ);
@@ -63,7 +63,7 @@ static int __init nslu2_power_init(void)
}
if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
- SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
+ IRQF_DISABLED, "NSLU2 power button", NULL) < 0) {
printk(KERN_DEBUG "Power Button IRQ %d not available\n",
NSLU2_PB_IRQ);
diff --git a/trunk/arch/arm/mach-l7200/core.c b/trunk/arch/arm/mach-l7200/core.c
index ac626436e96f..b7af5640ea7b 100644
--- a/trunk/arch/arm/mach-l7200/core.c
+++ b/trunk/arch/arm/mach-l7200/core.c
@@ -7,6 +7,7 @@
*/
#include
#include
+#include
#include
#include
diff --git a/trunk/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/trunk/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index c0e6854289f1..35c3606a2079 100644
--- a/trunk/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/trunk/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -12,6 +12,7 @@
#include
#include
#include
+#include
#include
#include
diff --git a/trunk/arch/arm/mach-lh7a40x/time.c b/trunk/arch/arm/mach-lh7a40x/time.c
index 1919835d9610..ad5652e01507 100644
--- a/trunk/arch/arm/mach-lh7a40x/time.c
+++ b/trunk/arch/arm/mach-lh7a40x/time.c
@@ -11,6 +11,7 @@
#include
#include
#include
+#include
#include
#include
@@ -52,7 +53,7 @@ lh7a40x_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction lh7a40x_timer_irq = {
.name = "LHA740x Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = lh7a40x_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-netx/time.c b/trunk/arch/arm/mach-netx/time.c
index edfbdf40c600..6d72c81b7d9f 100644
--- a/trunk/arch/arm/mach-netx/time.c
+++ b/trunk/arch/arm/mach-netx/time.c
@@ -54,7 +54,7 @@ netx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction netx_timer_irq = {
.name = "NetX Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = netx_timer_interrupt,
};
diff --git a/trunk/arch/arm/mach-omap1/Kconfig b/trunk/arch/arm/mach-omap1/Kconfig
index f8d716ccc1df..d135568dc9e7 100644
--- a/trunk/arch/arm/mach-omap1/Kconfig
+++ b/trunk/arch/arm/mach-omap1/Kconfig
@@ -62,6 +62,13 @@ config MACH_OMAP_PERSEUS2
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.
+config MACH_OMAP_FSAMPLE
+ bool "TI F-Sample"
+ depends on ARCH_OMAP1 && ARCH_OMAP730
+ help
+ Support for TI OMAP 850 F-Sample board. Say Y here if you have such
+ a board.
+
config MACH_VOICEBLUE
bool "Voiceblue"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
diff --git a/trunk/arch/arm/mach-omap1/Makefile b/trunk/arch/arm/mach-omap1/Makefile
index 9ea719550ad3..7165f74f78da 100644
--- a/trunk/arch/arm/mach-omap1/Makefile
+++ b/trunk/arch/arm/mach-omap1/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
diff --git a/trunk/arch/arm/mach-omap1/board-ams-delta.c b/trunk/arch/arm/mach-omap1/board-ams-delta.c
index 73df32aac4c4..8437d065ada5 100644
--- a/trunk/arch/arm/mach-omap1/board-ams-delta.c
+++ b/trunk/arch/arm/mach-omap1/board-ams-delta.c
@@ -80,8 +80,15 @@ static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
+static struct omap_usb_config ams_delta_usb_config __initdata = {
+ .register_host = 1,
+ .hmc_mode = 16,
+ .pins[0] = 2,
+};
+
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_UART, &ams_delta_uart_config },
+ { OMAP_TAG_USB, &ams_delta_usb_config },
};
static struct platform_device ams_delta_led_device = {
diff --git a/trunk/arch/arm/mach-omap1/board-fsample.c b/trunk/arch/arm/mach-omap1/board-fsample.c
new file mode 100644
index 000000000000..c753a3c5aadd
--- /dev/null
+++ b/trunk/arch/arm/mach-omap1/board-fsample.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-omap1/board-fsample.c
+ *
+ * Modified from board-perseus2.c
+ *
+ * Original OMAP730 support by Jean Pihet
+ * Updated for 2.6 by Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include