diff --git a/[refs] b/[refs] index 4623292c63b5..c019c04a7d78 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 3fe05bd9980df7207a35b4841a94dc2875e86960 +refs/heads/master: fa6d79d27614223d82418023b7f5300f1a1530d3 diff --git a/trunk/Documentation/ABI/testing/sysfs-tty b/trunk/Documentation/ABI/testing/sysfs-tty index 0c430150d929..b138b663bf54 100644 --- a/trunk/Documentation/ABI/testing/sysfs-tty +++ b/trunk/Documentation/ABI/testing/sysfs-tty @@ -17,12 +17,3 @@ Description: device, like 'tty1'. The file supports poll() to detect virtual console switches. - -What: /sys/class/tty/ttyS0/uartclk -Date: Sep 2012 -Contact: Tomas Hlavacek -Description: - Shows the current uartclk value associated with the - UART port in serial_core, that is bound to TTY like ttyS0. - uartclk = 16 * baud_base - diff --git a/trunk/Documentation/devicetree/bindings/arm/omap/omap.txt b/trunk/Documentation/devicetree/bindings/arm/omap/omap.txt index d0051a750587..ccdd0e53451f 100644 --- a/trunk/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/trunk/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -36,9 +36,6 @@ Boards: - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3" -- OMAP3 Tobi with Overo : Commercial expansion board with daughter board - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" - - OMAP4 SDP : Software Developement Board compatible = "ti,omap4-sdp", "ti,omap4430" diff --git a/trunk/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/trunk/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt index 66788fda1db3..16695d9cf1e8 100644 --- a/trunk/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ b/trunk/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt @@ -11,11 +11,6 @@ Required properties: - interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is not used. -- ti,use-leds : Enables LEDA and LEDB outputs if set -- ti,debounce : if n-th bit is set, debounces GPIO-n -- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) -- ti,pullups : if n-th bit is set, set a pullup on GPIO-n -- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n Example: @@ -25,5 +20,4 @@ twl_gpio: gpio { gpio-controller; #interrupt-cells = <2>; interrupt-controller; - ti,use-leds; }; diff --git a/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 2f5322b119eb..1a85f986961b 100644 --- a/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,4 +56,3 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS ti,tsc2003 I2C Touch-Screen Controller -ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/trunk/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/trunk/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt deleted file mode 100644 index 9ceb19e0c7fd..000000000000 --- a/trunk/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt +++ /dev/null @@ -1,52 +0,0 @@ -* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin - -Required properties: -- compatible : Should be "jedec,lpddr2-timings" -- min-freq : minimum DDR clock frequency for the speed-bin. Type is -- max-freq : maximum DDR clock frequency for the speed-bin. Type is - -Optional properties: - -The following properties represent AC timing parameters from the memory -data-sheet of the device for a given speed-bin. All these properties are -of type and the default unit is ps (pico seconds). Parameters with -a different unit have a suffix indicating the unit such as 'tRAS-max-ns' -- tRCD -- tWR -- tRAS-min -- tRRD -- tWTR -- tXP -- tRTP -- tDQSCK-max -- tFAW -- tZQCS -- tZQinit -- tRPab -- tZQCL -- tCKESR -- tRAS-max-ns -- tDQSCK-max-derated - -Example: - -timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { - compatible = "jedec,lpddr2-timings"; - min-freq = <10000000>; - max-freq = <400000000>; - tRPab = <21000>; - tRCD = <18000>; - tWR = <15000>; - tRAS-min = <42000>; - tRRD = <10000>; - tWTR = <7500>; - tXP = <7500>; - tRTP = <7500>; - tCKESR = <15000>; - tDQSCK-max = <5500>; - tFAW = <50000>; - tZQCS = <90000>; - tZQCL = <360000>; - tZQinit = <1000000>; - tRAS-max-ns = <70000>; -}; diff --git a/trunk/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/trunk/Documentation/devicetree/bindings/lpddr2/lpddr2.txt deleted file mode 100644 index 58354a075e13..000000000000 --- a/trunk/Documentation/devicetree/bindings/lpddr2/lpddr2.txt +++ /dev/null @@ -1,102 +0,0 @@ -* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2 - -Required properties: -- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2", - "jedec,lpddr2-s4" - - "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type - - "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type - - "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type - -- density : representing density in Mb (Mega bits) - -- io-width : representing bus width. Possible values are 8, 16, and 32 - -Optional properties: - -The following optional properties represent the minimum value of some AC -timing parameters of the DDR device in terms of number of clock cycles. -These values shall be obtained from the device data-sheet. -- tRRD-min-tck -- tWTR-min-tck -- tXP-min-tck -- tRTP-min-tck -- tCKE-min-tck -- tRPab-min-tck -- tRCD-min-tck -- tWR-min-tck -- tRASmin-min-tck -- tCKESR-min-tck -- tFAW-min-tck - -Child nodes: -- The lpddr2 node may have one or more child nodes of type "lpddr2-timings". - "lpddr2-timings" provides AC timing parameters of the device for - a given speed-bin. The user may provide the timings for as many - speed-bins as is required. Please see Documentation/devicetree/ - bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings" - -Example: - -elpida_ECB240ABACN : lpddr2 { - compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; - density = <2048>; - io-width = <32>; - - tRPab-min-tck = <3>; - tRCD-min-tck = <3>; - tWR-min-tck = <3>; - tRASmin-min-tck = <3>; - tRRD-min-tck = <2>; - tWTR-min-tck = <2>; - tXP-min-tck = <2>; - tRTP-min-tck = <2>; - tCKE-min-tck = <3>; - tCKESR-min-tck = <3>; - tFAW-min-tck = <8>; - - timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { - compatible = "jedec,lpddr2-timings"; - min-freq = <10000000>; - max-freq = <400000000>; - tRPab = <21000>; - tRCD = <18000>; - tWR = <15000>; - tRAS-min = <42000>; - tRRD = <10000>; - tWTR = <7500>; - tXP = <7500>; - tRTP = <7500>; - tCKESR = <15000>; - tDQSCK-max = <5500>; - tFAW = <50000>; - tZQCS = <90000>; - tZQCL = <360000>; - tZQinit = <1000000>; - tRAS-max-ns = <70000>; - }; - - timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { - compatible = "jedec,lpddr2-timings"; - min-freq = <10000000>; - max-freq = <200000000>; - tRPab = <21000>; - tRCD = <18000>; - tWR = <15000>; - tRAS-min = <42000>; - tRRD = <10000>; - tWTR = <10000>; - tXP = <7500>; - tRTP = <7500>; - tCKESR = <15000>; - tDQSCK-max = <5500>; - tFAW = <50000>; - tZQCS = <90000>; - tZQCL = <360000>; - tZQinit = <1000000>; - tRAS-max-ns = <70000>; - }; - -} diff --git a/trunk/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/trunk/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt deleted file mode 100644 index 938f8e1ba205..000000000000 --- a/trunk/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ /dev/null @@ -1,55 +0,0 @@ -* EMIF family of TI SDRAM controllers - -EMIF - External Memory Interface - is an SDRAM controller used in -TI SoCs. EMIF supports, based on the IP revision, one or more of -DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance -of the EMIF IP and memory parts attached to it. - -Required properties: -- compatible : Should be of the form "ti,emif-" where - is the IP revision of the specific EMIF instance. - -- phy-type : indicating the DDR phy type. Following are the - allowed values - <1> : Attila PHY - <2> : Intelli PHY - -- device-handle : phandle to a "lpddr2" node representing the memory part - -- ti,hwmods : For TI hwmods processing and omap device creation - the value shall be "emif" where is the number of the EMIF - instance with base 1. - -Optional properties: -- cs1-used : Have this property if CS1 of this EMIF - instance has a memory part attached to it. If there is a memory - part attached to CS1, it should be the same type as the one on CS0, - so there is no need to give the details of this memory part. - -- cal-resistor-per-cs : Have this property if the board has one - calibration resistor per chip-select. - -- hw-caps-read-idle-ctrl: Have this property if the controller - supports read idle window programming - -- hw-caps-dll-calib-ctrl: Have this property if the controller - supports dll calibration control - -- hw-caps-ll-interface : Have this property if the controller - has a low latency interface and corresponding interrupt events - -- hw-caps-temp-alert : Have this property if the controller - has capability for generating SDRAM temperature alerts - -Example: - -emif1: emif@0x4c000000 { - compatible = "ti,emif-4d"; - ti,hwmods = "emif2"; - phy-type = <1>; - device-handle = <&elpida_ECB240ABACN>; - cs1-used; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; -}; diff --git a/trunk/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/trunk/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt deleted file mode 100644 index 0d439dfc1aa5..000000000000 --- a/trunk/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt +++ /dev/null @@ -1,14 +0,0 @@ -* NXP LPC32xx SoC High Speed UART - -Required properties: -- compatible: Should be "nxp,lpc3220-hsuart" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt - -Example: - - uart1: serial@40014000 { - compatible = "nxp,lpc3220-hsuart"; - reg = <0x40014000 0x1000>; - interrupts = <26 0>; - }; diff --git a/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt index ba385f2e0ddc..0847fdeee11a 100644 --- a/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ b/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -25,8 +25,6 @@ Optional properties: accesses to the UART (e.g. TI davinci). - used-by-rtas : set to indicate that the port is in use by the OpenFirmware RTAS and should not be registered. -- no-loopback-test: set to indicate that the port does not implements loopback - test mode Example: diff --git a/trunk/Documentation/serial/00-INDEX b/trunk/Documentation/serial/00-INDEX index f7b0c7dc25ef..e09468ad3cb1 100644 --- a/trunk/Documentation/serial/00-INDEX +++ b/trunk/Documentation/serial/00-INDEX @@ -2,6 +2,8 @@ - this file. README.cycladesZ - info on Cyclades-Z firmware loading. +computone.txt + - info on Computone Intelliport II/Plus Multiport Serial Driver. digiepca.txt - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. hayes-esp.txt diff --git a/trunk/Documentation/serial/computone.txt b/trunk/Documentation/serial/computone.txt new file mode 100644 index 000000000000..a6a1158ea2ba --- /dev/null +++ b/trunk/Documentation/serial/computone.txt @@ -0,0 +1,520 @@ +NOTE: This is an unmaintained driver. It is not guaranteed to work due to +changes made in the tty layer in 2.6. If you wish to take over maintenance of +this driver, contact Michael Warfield . + +Changelog: +---------- +11-01-2001: Original Document + +10-29-2004: Minor misspelling & format fix, update status of driver. + James Nelson + +Computone Intelliport II/Plus Multiport Serial Driver +----------------------------------------------------- + +Release Notes For Linux Kernel 2.2 and higher. +These notes are for the drivers which have already been integrated into the +kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. + +Version: 1.2.14 +Date: 11/01/2001 +Historical Author: Andrew Manison +Primary Author: Doug McNash + +This file assumes that you are using the Computone drivers which are +integrated into the kernel sources. For updating the drivers or installing +drivers into kernels which do not already have Computone drivers, please +refer to the instructions in the README.computone file in the driver patch. + + +1. INTRODUCTION + +This driver supports the entire family of Intelliport II/Plus controllers +with the exception of the MicroChannel controllers. It does not support +products previous to the Intelliport II. + +This driver was developed on the v2.0.x Linux tree and has been tested up +to v2.4.14; it will probably not work with earlier v1.X kernels,. + + +2. QUICK INSTALLATION + +Hardware - If you have an ISA card, find a free interrupt and io port. + List those in use with `cat /proc/interrupts` and + `cat /proc/ioports`. Set the card dip switches to a free + address. You may need to configure your BIOS to reserve an + irq for an ISA card. PCI and EISA parameters are set + automagically. Insert card into computer with the power off + before or after drivers installation. + + Note the hardware address from the Computone ISA cards installed into + the system. These are required for editing ip2.c or editing + /etc/modprobe.d/*.conf, or for specification on the modprobe + command line. + + Note that the /etc/modules.conf should be used for older (pre-2.6) + kernels. + +Software - + +Module installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (m) module for CONFIG_COMPUTONE under character + devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c if needed + or + edit config file in /etc/modprobe.d/ if needed (module). + or both to match this setting. +d) Run "make modules" +e) Run "make modules_install" +f) Run "/sbin/depmod -a" +g) install driver using `modprobe ip2 ` (options listed below) +h) run ip2mkdev (either the script below or the binary version) + + +Kernel installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (y) kernel for CONFIG_COMPUTONE under character + devices. CONFIG_PCI may need to be set if you have PCI bus. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c + (Optional - may be specified on kernel command line now) +d) Run "make zImage" or whatever target you prefer. +e) mv /usr/src/linux/arch/x86/boot/zImage to /boot. +f) Add new config for this kernel into /etc/lilo.conf, run "lilo" + or copy to a floppy disk and boot from that floppy disk. +g) Reboot using this kernel +h) run ip2mkdev (either the script below or the binary version) + +Kernel command line options: + +When compiling the driver into the kernel, io and irq may be +compiled into the driver by editing ip2.c and setting the values for +io and irq in the appropriate array. An alternative is to specify +a command line parameter to the kernel at boot up. + + ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + +Note that this order is very different from the specifications for the +modload parameters which have separate IRQ and IO specifiers. + +The io port also selects PCI (1) and EISA (2) boards. + + io=0 No board + io=1 PCI board + io=2 EISA board + else ISA board io address + +You only need to specify the boards which are present. + + Examples: + + 2 PCI boards: + + ip2=1,0,1,0 + + 1 ISA board at 0x310 irq 5: + + ip2=0x310,5 + +This can be added to and "append" option in lilo.conf similar to this: + + append="ip2=1,0,1,0" + + +3. INSTALLATION + +Previously, the driver sources were packaged with a set of patch files +to update the character drivers' makefile and configuration file, and other +kernel source files. A build script (ip2build) was included which applies +the patches if needed, and build any utilities needed. +What you receive may be a single patch file in conventional kernel +patch format build script. That form can also be applied by +running patch -p1 < ThePatchFile. Otherwise run ip2build. + +The driver can be installed as a module (recommended) or built into the +kernel. This is selected as for other drivers through the `make config` +command from the root of the Linux source tree. If the driver is built +into the kernel you will need to edit the file ip2.c to match the boards +you are installing. See that file for instructions. If the driver is +installed as a module the configuration can also be specified on the +modprobe command line as follows: + + modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 + +where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, +12,15) and addr1-4 are the base addresses for up to four controllers. If +the irqs are not specified the driver uses the default in ip2.c (which +selects polled mode). If no base addresses are specified the defaults in +ip2.c are used. If you are autoloading the driver module with kerneld or +kmod the base addresses and interrupt number must also be set in ip2.c +and recompile or just insert and options line in /etc/modprobe.d/*.conf or both. +The options line is equivalent to the command line and takes precedence over +what is in ip2.c. + +config sample to put /etc/modprobe.d/*.conf: + options ip2 io=1,0x328 irq=1,10 + alias char-major-71 ip2 + alias char-major-72 ip2 + alias char-major-73 ip2 + +The equivalent in ip2.c: + +static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; +static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; + +The equivalent for the kernel command line (in lilo.conf): + + append="ip2=1,1,0x328,10" + + +Note: Both io and irq should be updated to reflect YOUR system. An "io" + address of 1 or 2 indicates a PCI or EISA card in the board table. + The PCI or EISA irq will be assigned automatically. + +Specifying an invalid or in-use irq will default the driver into +running in polled mode for that card. If all irq entries are 0 then +all cards will operate in polled mode. + +If you select the driver as part of the kernel run : + + make zlilo (or whatever you do to create a bootable kernel) + +If you selected a module run : + + make modules && make modules_install + +The utility ip2mkdev (see 5 and 7 below) creates all the device nodes +required by the driver. For a device to be created it must be configured +in the driver and the board must be installed. Only devices corresponding +to real IntelliPort II ports are created. With multiple boards and expansion +boxes this will leave gaps in the sequence of device names. ip2mkdev uses +Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and +cuf0 - cuf255 for callout devices. + + +4. USING THE DRIVERS + +As noted above, the driver implements the ports in accordance with Linux +conventions, and the devices should be interchangeable with the standard +serial devices. (This is a key point for problem reporting: please make +sure that what you are trying do works on the ttySx/cuax ports first; then +tell us what went wrong with the ip2 ports!) + +Higher speeds can be obtained using the setserial utility which remaps +38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. +Intelliport II installations using the PowerPort expansion module can +use the custom speed setting to select the highest speeds: 153,600 bps, +230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for +custom baud rate configuration is fixed at 921,600 for cards/expansion +modules with ST654's and 115200 for those with Cirrus CD1400's. This +corresponds to the maximum bit rates those chips are capable. +For example if the baud base is 921600 and the baud divisor is 18 then +the custom rate is 921600/18 = 51200 bps. See the setserial man page for +complete details. Of course if stty accepts the higher rates now you can +use that as well as the standard ioctls(). + + +5. ip2mkdev and assorted utilities... + +Several utilities, including the source for a binary ip2mkdev utility are +available under .../drivers/char/ip2. These can be build by changing to +that directory and typing "make" after the kernel has be built. If you do +not wish to compile the binary utilities, the shell script below can be +cut out and run as "ip2mkdev" to create the necessary device files. To +use the ip2mkdev script, you must have procfs enabled and the proc file +system mounted on /proc. + + +6. NOTES + +This is a release version of the driver, but it is impossible to test it +in all configurations of Linux. If there is any anomalous behaviour that +does not match the standard serial port's behaviour please let us know. + + +7. ip2mkdev shell script + +Previously, this script was simply attached here. It is now attached as a +shar archive to make it easier to extract the script from the documentation. +To create the ip2mkdev shell script change to a convenient directory (/tmp +works just fine) and run the following command: + + unshar Documentation/serial/computone.txt + (This file) + +You should now have a file ip2mkdev in your current working directory with +permissions set to execute. Running that script with then create the +necessary devices for the Computone boards, interfaces, and ports which +are present on you system at the time it is run. + + +#!/bin/sh +# This is a shell archive (produced by GNU sharutils 4.2.1). +# To extract the files from this archive, save it to some FILE, remove +# everything before the `!/bin/sh' line above, then type `sh FILE'. +# +# Made on 2001-10-29 10:32 EST by . +# Source directory was `/home2/src/tmp'. +# +# Existing files will *not* be overwritten unless `-c' is specified. +# +# This shar contains: +# length mode name +# ------ ---------- ------------------------------------------ +# 4251 -rwxr-xr-x ip2mkdev +# +save_IFS="${IFS}" +IFS="${IFS}:" +gettext_dir=FAILED +locale_dir=FAILED +first_param="$1" +for dir in $PATH +do + if test "$gettext_dir" = FAILED && test -f $dir/gettext \ + && ($dir/gettext --version >/dev/null 2>&1) + then + set `$dir/gettext --version 2>&1` + if test "$3" = GNU + then + gettext_dir=$dir + fi + fi + if test "$locale_dir" = FAILED && test -f $dir/shar \ + && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) + then + locale_dir=`$dir/shar --print-text-domain-dir` + fi +done +IFS="$save_IFS" +if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED +then + echo=echo +else + TEXTDOMAINDIR=$locale_dir + export TEXTDOMAINDIR + TEXTDOMAIN=sharutils + export TEXTDOMAIN + echo="$gettext_dir/gettext -s" +fi +if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then + shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' +elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' +elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$2 "$8"' +else + shar_touch=: + echo + $echo 'WARNING: not restoring timestamps. Consider getting and' + $echo "installing GNU \`touch', distributed in GNU File Utilities..." + echo +fi +rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch +# +if mkdir _sh17581; then + $echo 'x -' 'creating lock directory' +else + $echo 'failed to create lock directory' + exit 1 +fi +# ============= ip2mkdev ============== +if test -f 'ip2mkdev' && test "$first_param" != -c; then + $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' +else + $echo 'x -' extracting 'ip2mkdev' '(text)' + sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && +#!/bin/sh - +# +# ip2mkdev +# +# Make or remove devices as needed for Computone Intelliport drivers +# +# First rule! If the dev file exists and you need it, don't mess +# with it. That prevents us from screwing up open ttys, ownership +# and permissions on a running system! +# +# This script will NOT remove devices that no longer exist if their +# board or interface box has been removed. If you want to get rid +# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" +# before running this script. Running this script will then recreate +# all the valid devices. +# +# Michael H. Warfield +# /\/\|=mhw=|\/\/ +# mhw@wittsend.com +# +# Updated 10/29/2000 for version 1.2.13 naming convention +# under devfs. /\/\|=mhw=|\/\/ +# +# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ +# +X +if test -d /dev/ip2 ; then +# This is devfs mode... We don't do anything except create symlinks +# from the real devices to the old names! +X cd /dev +X echo "Creating symbolic links to devfs devices" +X for i in `ls ip2` ; do +X if test ! -L ip2$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f ip2$i +X ln -s ip2/$i ip2$i +X fi +X done +X for i in `( cd tts ; ls F* )` ; do +X if test ! -L tty$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f tty$i +X ln -s tts/$i tty$i +X fi +X done +X for i in `( cd cua ; ls F* )` ; do +X DEVNUMBER=`expr $i : 'F\(.*\)'` +X if test ! -L cuf$DEVNUMBER ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f cuf$DEVNUMBER +X ln -s cua/$i cuf$DEVNUMBER +X fi +X done +X exit 0 +fi +X +if test ! -f /proc/tty/drivers +then +X echo "\ +Unable to check driver status. +Make sure proc file system is mounted." +X +X exit 255 +fi +X +if test ! -f /proc/tty/driver/ip2 +then +X echo "\ +Unable to locate ip2 proc file. +Attempting to load driver" +X +X if /sbin/insmod ip2 +X then +X if test ! -f /proc/tty/driver/ip2 +X then +X echo "\ +Unable to locate ip2 proc file after loading driver. +Driver initialization failure or driver version error. +" +X exit 255 +X fi +X else +X echo "Unable to load ip2 driver." +X exit 255 +X fi +fi +X +# Ok... So we got the driver loaded and we can locate the procfs files. +# Next we need our major numbers. +X +TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` +X +echo "\ +TTYMAJOR = $TTYMAJOR +CUAMAJOR = $CUAMAJOR +BRDMAJOR = $BRDMAJOR +" +X +# Ok... Now we should know our major numbers, if appropriate... +# Now we need our boards and start the device loops. +X +grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest +do +X # The test for blank "type" will catch the stats lead-in lines +X # if they exist in the file +X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" +X then +X continue +X fi +X +X BOARDNO=`expr "$number" : '\([0-9]\):'` +X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` +X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` +X +X if test "$BOARDNO" = "" -o "$PORTS" = "" +X then +# This may be a bug. We should at least get this much information +X echo "Unable to process board line" +X continue +X fi +X +X if test "$MINORS" = "" +X then +# Silently skip this one. This board seems to have no boxes +X continue +X fi +X +X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" +X +X if test "$BRDMAJOR" != "" +X then +X BRDMINOR=`expr $BOARDNO \* 4` +X STSMINOR=`expr $BRDMINOR + 1` +X if test ! -c /dev/ip2ipl$BOARDNO ; then +X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR +X fi +X if test ! -c /dev/ip2stat$BOARDNO ; then +X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR +X fi +X fi +X +X if test "$TTYMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/ttyF$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO +X fi +X done +X fi +X +X if test "$CUAMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/cuf$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO +X fi +X done +X fi +done +X +Xexit 0 +SHAR_EOF + (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && + chmod 0755 'ip2mkdev' || + $echo 'restore of' 'ip2mkdev' 'failed' + if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ + && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then + md5sum -c << SHAR_EOF >/dev/null 2>&1 \ + || $echo 'ip2mkdev:' 'MD5 check failed' +cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev +SHAR_EOF + else + shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" + test 4251 -eq "$shar_count" || + $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" + fi +fi +rm -fr _sh17581 +exit 0 diff --git a/trunk/arch/alpha/kernel/srmcons.c b/trunk/arch/alpha/kernel/srmcons.c index 5d5865204a1d..3ea809430eda 100644 --- a/trunk/arch/alpha/kernel/srmcons.c +++ b/trunk/arch/alpha/kernel/srmcons.c @@ -223,7 +223,6 @@ srmcons_init(void) driver->subtype = SYSTEM_TYPE_SYSCONS; driver->init_termios = tty_std_termios; tty_set_operations(driver, &srmcons_ops); - tty_port_link_device(&srmcons_singleton.port, driver, 0); err = tty_register_driver(driver); if (err) { put_tty_driver(driver); diff --git a/trunk/arch/arm/boot/dts/am335x-bone.dts b/trunk/arch/arm/boot/dts/am335x-bone.dts index c634f87e230e..a9af4db7234c 100644 --- a/trunk/arch/arm/boot/dts/am335x-bone.dts +++ b/trunk/arch/arm/boot/dts/am335x-bone.dts @@ -17,64 +17,4 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - - ocp { - uart1: serial@44e09000 { - status = "okay"; - }; - - i2c1: i2c@44e0b000 { - status = "okay"; - clock-frequency = <400000>; - - tps: tps@24 { - reg = <0x24>; - }; - - }; - }; -}; - -/include/ "tps65217.dtsi" - -&tps { - regulators { - dcdc1_reg: regulator@0 { - regulator-always-on; - }; - - dcdc2_reg: regulator@1 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; - regulator-boot-on; - regulator-always-on; - }; - - dcdc3_reg: regulator@2 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: regulator@3 { - regulator-always-on; - }; - - ldo2_reg: regulator@4 { - regulator-always-on; - }; - - ldo3_reg: regulator@5 { - regulator-always-on; - }; - - ldo4_reg: regulator@6 { - regulator-always-on; - }; - }; }; diff --git a/trunk/arch/arm/boot/dts/am335x-evm.dts b/trunk/arch/arm/boot/dts/am335x-evm.dts index 185d6325a458..d6a97d9eff72 100644 --- a/trunk/arch/arm/boot/dts/am335x-evm.dts +++ b/trunk/arch/arm/boot/dts/am335x-evm.dts @@ -17,104 +17,4 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - - ocp { - uart1: serial@44e09000 { - status = "okay"; - }; - - i2c1: i2c@44e0b000 { - status = "okay"; - clock-frequency = <400000>; - - tps: tps@2d { - reg = <0x2d>; - }; - }; - }; - - vbat: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - }; -}; - -/include/ "tps65910.dtsi" - -&tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; - - regulators { - vrtc_reg: regulator@0 { - regulator-always-on; - }; - - vio_reg: regulator@1 { - regulator-always-on; - }; - - vdd1_reg: regulator@2 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; - regulator-boot-on; - regulator-always-on; - }; - - vdd2_reg: regulator@3 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - vdd3_reg: regulator@4 { - regulator-always-on; - }; - - vdig1_reg: regulator@5 { - regulator-always-on; - }; - - vdig2_reg: regulator@6 { - regulator-always-on; - }; - - vpll_reg: regulator@7 { - regulator-always-on; - }; - - vdac_reg: regulator@8 { - regulator-always-on; - }; - - vaux1_reg: regulator@9 { - regulator-always-on; - }; - - vaux2_reg: regulator@10 { - regulator-always-on; - }; - - vaux33_reg: regulator@11 { - regulator-always-on; - }; - - vmmc_reg: regulator@12 { - regulator-always-on; - }; - }; }; diff --git a/trunk/arch/arm/boot/dts/am33xx.dtsi b/trunk/arch/arm/boot/dts/am33xx.dtsi index bb31bff01998..bd0cff3f808c 100644 --- a/trunk/arch/arm/boot/dts/am33xx.dtsi +++ b/trunk/arch/arm/boot/dts/am33xx.dtsi @@ -69,146 +69,95 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; - reg = <0x44e07000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <96>; }; - gpio2: gpio@4804c000 { + gpio2: gpio@4804C000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; - reg = <0x4804c000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <98>; }; - gpio3: gpio@481ac000 { + gpio3: gpio@481AC000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; - reg = <0x481ac000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <32>; }; - gpio4: gpio@481ae000 { + gpio4: gpio@481AE000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; - reg = <0x481ae000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <62>; }; - uart1: serial@44e09000 { + uart1: serial@44E09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; - reg = <0x44e09000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <72>; - status = "disabled"; }; uart2: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; - reg = <0x48022000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <73>; - status = "disabled"; }; uart3: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; - reg = <0x48024000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <74>; - status = "disabled"; }; - uart4: serial@481a6000 { + uart4: serial@481A6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; - reg = <0x481a6000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <44>; - status = "disabled"; }; - uart5: serial@481a8000 { + uart5: serial@481A8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; - reg = <0x481a8000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <45>; - status = "disabled"; }; - uart6: serial@481aa000 { + uart6: serial@481AA000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; - reg = <0x481aa000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <46>; - status = "disabled"; }; - i2c1: i2c@44e0b000 { + i2c1: i2c@44E0B000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; - reg = <0x44e0b000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <70>; - status = "disabled"; }; - i2c2: i2c@4802a000 { + i2c2: i2c@4802A000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; - reg = <0x4802a000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <71>; - status = "disabled"; }; - i2c3: i2c@4819c000 { + i2c3: i2c@4819C000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; - reg = <0x4819c000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <30>; - status = "disabled"; }; wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; - reg = <0x44e35000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <91>; }; }; }; diff --git a/trunk/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/trunk/arch/arm/boot/dts/elpida_ecb240abacn.dtsi deleted file mode 100644 index f97f70f83374..000000000000 --- a/trunk/arch/arm/boot/dts/elpida_ecb240abacn.dtsi +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Common devices used in different OMAP boards - */ - -/ { - elpida_ECB240ABACN: lpddr2 { - compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; - density = <2048>; - io-width = <32>; - - tRPab-min-tck = <3>; - tRCD-min-tck = <3>; - tWR-min-tck = <3>; - tRASmin-min-tck = <3>; - tRRD-min-tck = <2>; - tWTR-min-tck = <2>; - tXP-min-tck = <2>; - tRTP-min-tck = <2>; - tCKE-min-tck = <3>; - tCKESR-min-tck = <3>; - tFAW-min-tck = <8>; - - timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { - compatible = "jedec,lpddr2-timings"; - min-freq = <10000000>; - max-freq = <400000000>; - tRPab = <21000>; - tRCD = <18000>; - tWR = <15000>; - tRAS-min = <42000>; - tRRD = <10000>; - tWTR = <7500>; - tXP = <7500>; - tRTP = <7500>; - tCKESR = <15000>; - tDQSCK-max = <5500>; - tFAW = <50000>; - tZQCS = <90000>; - tZQCL = <360000>; - tZQinit = <1000000>; - tRAS-max-ns = <70000>; - tDQSCK-max-derated = <6000>; - }; - - timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { - compatible = "jedec,lpddr2-timings"; - min-freq = <10000000>; - max-freq = <200000000>; - tRPab = <21000>; - tRCD = <18000>; - tWR = <15000>; - tRAS-min = <42000>; - tRRD = <10000>; - tWTR = <10000>; - tXP = <7500>; - tRTP = <7500>; - tCKESR = <15000>; - tDQSCK-max = <5500>; - tFAW = <50000>; - tZQCS = <90000>; - tZQCL = <360000>; - tZQinit = <1000000>; - tRAS-max-ns = <70000>; - tDQSCK-max-derated = <6000>; - }; - }; -}; diff --git a/trunk/arch/arm/boot/dts/omap2420-h4.dts b/trunk/arch/arm/boot/dts/omap2420-h4.dts index 77b84e17c477..25b50b759dec 100644 --- a/trunk/arch/arm/boot/dts/omap2420-h4.dts +++ b/trunk/arch/arm/boot/dts/omap2420-h4.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap2420.dtsi" +/include/ "omap2.dtsi" / { model = "TI OMAP2420 H4 board"; diff --git a/trunk/arch/arm/boot/dts/omap2420.dtsi b/trunk/arch/arm/boot/dts/omap2420.dtsi deleted file mode 100644 index bfd76b4a0ddc..000000000000 --- a/trunk/arch/arm/boot/dts/omap2420.dtsi +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Device Tree Source for OMAP2420 SoC - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "omap2.dtsi" - -/ { - compatible = "ti,omap2420", "ti,omap2"; - - ocp { - omap2420_pmx: pinmux@48000030 { - compatible = "ti,omap2420-padconf", "pinctrl-single"; - reg = <0x48000030 0x0113>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - - mcbsp1: mcbsp@48074000 { - compatible = "ti,omap2420-mcbsp"; - reg = <0x48074000 0xff>; - reg-names = "mpu"; - interrupts = <59>, /* TX interrupt */ - <60>; /* RX interrupt */ - interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; - ti,hwmods = "mcbsp1"; - }; - - mcbsp2: mcbsp@48076000 { - compatible = "ti,omap2420-mcbsp"; - reg = <0x48076000 0xff>; - reg-names = "mpu"; - interrupts = <62>, /* TX interrupt */ - <63>; /* RX interrupt */ - interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; - ti,hwmods = "mcbsp2"; - }; - }; -}; diff --git a/trunk/arch/arm/boot/dts/omap2430.dtsi b/trunk/arch/arm/boot/dts/omap2430.dtsi deleted file mode 100644 index 4565d9750f4d..000000000000 --- a/trunk/arch/arm/boot/dts/omap2430.dtsi +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Device Tree Source for OMAP243x SoC - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "omap2.dtsi" - -/ { - compatible = "ti,omap2430", "ti,omap2"; - - ocp { - omap2430_pmx: pinmux@49002030 { - compatible = "ti,omap2430-padconf", "pinctrl-single"; - reg = <0x49002030 0x0154>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - - mcbsp1: mcbsp@48074000 { - compatible = "ti,omap2430-mcbsp"; - reg = <0x48074000 0xff>; - reg-names = "mpu"; - interrupts = <64>, /* OCP compliant interrupt */ - <59>, /* TX interrupt */ - <60>, /* RX interrupt */ - <61>; /* RX overflow interrupt */ - interrupt-names = "common", "tx", "rx", "rx_overflow"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - }; - - mcbsp2: mcbsp@48076000 { - compatible = "ti,omap2430-mcbsp"; - reg = <0x48076000 0xff>; - reg-names = "mpu"; - interrupts = <16>, /* OCP compliant interrupt */ - <62>, /* TX interrupt */ - <63>; /* RX interrupt */ - interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp2"; - }; - - mcbsp3: mcbsp@4808c000 { - compatible = "ti,omap2430-mcbsp"; - reg = <0x4808c000 0xff>; - reg-names = "mpu"; - interrupts = <17>, /* OCP compliant interrupt */ - <89>, /* TX interrupt */ - <90>; /* RX interrupt */ - interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - }; - - mcbsp4: mcbsp@4808e000 { - compatible = "ti,omap2430-mcbsp"; - reg = <0x4808e000 0xff>; - reg-names = "mpu"; - interrupts = <18>, /* OCP compliant interrupt */ - <54>, /* TX interrupt */ - <55>; /* RX interrupt */ - interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp4"; - }; - - mcbsp5: mcbsp@48096000 { - compatible = "ti,omap2430-mcbsp"; - reg = <0x48096000 0xff>; - reg-names = "mpu"; - interrupts = <19>, /* OCP compliant interrupt */ - <81>, /* TX interrupt */ - <82>; /* RX interrupt */ - interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp5"; - }; - }; -}; diff --git a/trunk/arch/arm/boot/dts/omap3-beagle-xm.dts b/trunk/arch/arm/boot/dts/omap3-beagle.dts similarity index 52% rename from trunk/arch/arm/boot/dts/omap3-beagle-xm.dts rename to trunk/arch/arm/boot/dts/omap3-beagle.dts index c38cf76df81f..cdcb98c7e075 100644 --- a/trunk/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/trunk/arch/arm/boot/dts/omap3-beagle.dts @@ -7,44 +7,16 @@ */ /dts-v1/; -/include/ "omap36xx.dtsi" +/include/ "omap3.dtsi" / { - model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; - - leds { - compatible = "gpio-leds"; - pmu_stat { - label = "beagleboard::pmu_stat"; - gpios = <&twl_gpio 19 0>; /* LEDB */ - }; - - heartbeat { - label = "beagleboard::usr0"; - gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "beagleboard::usr1"; - gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ - linux,default-trigger = "mmc0"; - }; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "omap3beagle"; - - ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; - }; }; &i2c1 { @@ -55,17 +27,11 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator-vsim { + vsim: regulator@10 { compatible = "ti,twl4030-vsim"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { - }; - }; }; }; @@ -101,15 +67,3 @@ &mmc3 { status = "disabled"; }; - -&twl_gpio { - ti,use-leds; - /* pullups: BIT(1) */ - ti,pullups = <0x000002>; - /* - * pulldowns: - * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) - * BIT(15), BIT(16), BIT(17) - */ - ti,pulldowns = <0x03a1c4>; -}; diff --git a/trunk/arch/arm/boot/dts/omap3-evm.dts b/trunk/arch/arm/boot/dts/omap3-evm.dts index e8ba1c247a39..f349ee9182ce 100644 --- a/trunk/arch/arm/boot/dts/omap3-evm.dts +++ b/trunk/arch/arm/boot/dts/omap3-evm.dts @@ -17,15 +17,6 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - - leds { - compatible = "gpio-leds"; - ledb { - label = "omap3evm::ledb"; - gpios = <&twl_gpio 19 0>; /* LEDB */ - linux,default-trigger = "default-on"; - }; - }; }; &i2c1 { @@ -55,7 +46,3 @@ reg = <0x5c>; }; }; - -&twl_gpio { - ti,use-leds; -}; diff --git a/trunk/arch/arm/boot/dts/omap3-overo.dtsi b/trunk/arch/arm/boot/dts/omap3-overo.dtsi deleted file mode 100644 index 89808ce01673..000000000000 --- a/trunk/arch/arm/boot/dts/omap3-overo.dtsi +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * The Gumstix Overo must be combined with an expansion board. - */ -/dts-v1/; - -/include/ "omap3.dtsi" - -/ { - leds { - compatible = "gpio-leds"; - overo { - label = "overo:blue:COM"; - gpios = <&twl_gpio 19 0>; - linux,default-trigger = "mmc0"; - }; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - }; -}; - -/include/ "twl4030.dtsi" - -/* i2c2 pins are used for gpio */ -&i2c2 { - status = "disabled"; -}; - -/* on board microSD slot */ -&mmc1 { - vmmc-supply = <&vmmc1>; - bus-width = <4>; -}; - -/* optional on board WiFi */ -&mmc2 { - bus-width = <4>; -}; - -&twl_gpio { - ti,use-leds; -}; diff --git a/trunk/arch/arm/boot/dts/omap3-tobi.dts b/trunk/arch/arm/boot/dts/omap3-tobi.dts deleted file mode 100644 index a13d12de77ff..000000000000 --- a/trunk/arch/arm/boot/dts/omap3-tobi.dts +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * Tobi expansion board is manufactured by Gumstix Inc. - */ - -/include/ "omap3-overo.dtsi" - -/ { - model = "TI OMAP3 Gumstix Overo on Tobi"; - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; - - leds { - compatible = "gpio-leds"; - heartbeat { - label = "overo:red:gpio21"; - gpios = <&gpio1 21 0>; - linux,default-trigger = "heartbeat"; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; -}; - -&mmc3 { - status = "disabled"; -}; diff --git a/trunk/arch/arm/boot/dts/omap3.dtsi b/trunk/arch/arm/boot/dts/omap3.dtsi index f38ea8771b44..810947198208 100644 --- a/trunk/arch/arm/boot/dts/omap3.dtsi +++ b/trunk/arch/arm/boot/dts/omap3.dtsi @@ -17,6 +17,7 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + serial3 = &uart4; }; cpus { @@ -68,24 +69,6 @@ reg = <0x48200000 0x1000>; }; - omap3_pmx_core: pinmux@48002030 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002030 0x05cc>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap3_pmx_wkup: pinmux@0x48002a58 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002a58 0x5c>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; ti,hwmods = "gpio1"; @@ -158,6 +141,12 @@ clock-frequency = <48000000>; }; + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + i2c1: i2c@48070000 { compatible = "ti,omap3-i2c"; #address-cells = <1>; @@ -231,74 +220,5 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; }; - - mcbsp1: mcbsp@48074000 { - compatible = "ti,omap3-mcbsp"; - reg = <0x48074000 0xff>; - reg-names = "mpu"; - interrupts = <16>, /* OCP compliant interrupt */ - <59>, /* TX interrupt */ - <60>; /* RX interrupt */ - interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - }; - - mcbsp2: mcbsp@49022000 { - compatible = "ti,omap3-mcbsp"; - reg = <0x49022000 0xff>, - <0x49028000 0xff>; - reg-names = "mpu", "sidetone"; - interrupts = <17>, /* OCP compliant interrupt */ - <62>, /* TX interrupt */ - <63>, /* RX interrupt */ - <4>; /* Sidetone */ - interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; - ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; - }; - - mcbsp3: mcbsp@49024000 { - compatible = "ti,omap3-mcbsp"; - reg = <0x49024000 0xff>, - <0x4902a000 0xff>; - reg-names = "mpu", "sidetone"; - interrupts = <22>, /* OCP compliant interrupt */ - <89>, /* TX interrupt */ - <90>, /* RX interrupt */ - <5>; /* Sidetone */ - interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - }; - - mcbsp4: mcbsp@49026000 { - compatible = "ti,omap3-mcbsp"; - reg = <0x49026000 0xff>; - reg-names = "mpu"; - interrupts = <23>, /* OCP compliant interrupt */ - <54>, /* TX interrupt */ - <55>; /* RX interrupt */ - interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp4"; - }; - - mcbsp5: mcbsp@48096000 { - compatible = "ti,omap3-mcbsp"; - reg = <0x48096000 0xff>; - reg-names = "mpu"; - interrupts = <27>, /* OCP compliant interrupt */ - <81>, /* TX interrupt */ - <82>; /* RX interrupt */ - interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp5"; - }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap36xx.dtsi b/trunk/arch/arm/boot/dts/omap36xx.dtsi deleted file mode 100644 index 96bf0287cb9f..000000000000 --- a/trunk/arch/arm/boot/dts/omap36xx.dtsi +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Device Tree Source for OMAP3 SoC - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "omap3.dtsi" - -/ { - aliases { - serial3 = &uart4; - }; - - ocp { - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - }; -}; diff --git a/trunk/arch/arm/boot/dts/omap4-panda.dts b/trunk/arch/arm/boot/dts/omap4-panda.dts index 20b966ee1bb3..9880c12877b3 100644 --- a/trunk/arch/arm/boot/dts/omap4-panda.dts +++ b/trunk/arch/arm/boot/dts/omap4-panda.dts @@ -8,7 +8,6 @@ /dts-v1/; /include/ "omap4.dtsi" -/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 PandaBoard"; @@ -127,13 +126,3 @@ ti,non-removable; bus-width = <4>; }; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; diff --git a/trunk/arch/arm/boot/dts/omap4-sdp.dts b/trunk/arch/arm/boot/dts/omap4-sdp.dts index 94a23b39033d..72216e932fc0 100644 --- a/trunk/arch/arm/boot/dts/omap4-sdp.dts +++ b/trunk/arch/arm/boot/dts/omap4-sdp.dts @@ -8,7 +8,6 @@ /dts-v1/; /include/ "omap4.dtsi" -/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -19,7 +18,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vdd_eth: fixedregulator-vdd-eth { + vdd_eth: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -29,7 +28,7 @@ regulator-boot-on; }; - vbat: fixedregulator-vbat { + vbat: fixedregulator@2 { compatible = "regulator-fixed"; regulator-name = "VBAT"; regulator-min-microvolt = <3750000>; @@ -116,33 +115,6 @@ }; }; -&omap4_pmx_core { - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ - 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */ - 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */ - 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */ - 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */ - 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */ - 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ - >; - }; - - uart4_pins: pinmux_uart4_pins { - pinctrl-single,pins = < - 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */ - 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ - >; - }; -}; - &i2c1 { clock-frequency = <400000>; @@ -254,98 +226,3 @@ bus-width = <4>; ti,non-removable; }; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = <0x00000012 /* KEY_E */ - 0x00010013 /* KEY_R */ - 0x00020014 /* KEY_T */ - 0x00030066 /* KEY_HOME */ - 0x0004003f /* KEY_F5 */ - 0x000500f0 /* KEY_UNKNOWN */ - 0x00060017 /* KEY_I */ - 0x0007002a /* KEY_LEFTSHIFT */ - 0x01000020 /* KEY_D*/ - 0x01010021 /* KEY_F */ - 0x01020022 /* KEY_G */ - 0x010300e7 /* KEY_SEND */ - 0x01040040 /* KEY_F6 */ - 0x010500f0 /* KEY_UNKNOWN */ - 0x01060025 /* KEY_K */ - 0x0107001c /* KEY_ENTER */ - 0x0200002d /* KEY_X */ - 0x0201002e /* KEY_C */ - 0x0202002f /* KEY_V */ - 0x0203006b /* KEY_END */ - 0x02040041 /* KEY_F7 */ - 0x020500f0 /* KEY_UNKNOWN */ - 0x02060034 /* KEY_DOT */ - 0x0207003a /* KEY_CAPSLOCK */ - 0x0300002c /* KEY_Z */ - 0x0301004e /* KEY_KPLUS */ - 0x03020030 /* KEY_B */ - 0x0303003b /* KEY_F1 */ - 0x03040042 /* KEY_F8 */ - 0x030500f0 /* KEY_UNKNOWN */ - 0x03060018 /* KEY_O */ - 0x03070039 /* KEY_SPACE */ - 0x04000011 /* KEY_W */ - 0x04010015 /* KEY_Y */ - 0x04020016 /* KEY_U */ - 0x0403003c /* KEY_F2 */ - 0x04040073 /* KEY_VOLUMEUP */ - 0x040500f0 /* KEY_UNKNOWN */ - 0x04060026 /* KEY_L */ - 0x04070069 /* KEY_LEFT */ - 0x0500001f /* KEY_S */ - 0x05010023 /* KEY_H */ - 0x05020024 /* KEY_J */ - 0x0503003d /* KEY_F3 */ - 0x05040043 /* KEY_F9 */ - 0x05050072 /* KEY_VOLUMEDOWN */ - 0x05060032 /* KEY_M */ - 0x0507006a /* KEY_RIGHT */ - 0x06000010 /* KEY_Q */ - 0x0601001e /* KEY_A */ - 0x06020031 /* KEY_N */ - 0x0603009e /* KEY_BACK */ - 0x0604000e /* KEY_BACKSPACE */ - 0x060500f0 /* KEY_UNKNOWN */ - 0x06060019 /* KEY_P */ - 0x06070067 /* KEY_UP */ - 0x07000094 /* KEY_PROG1 */ - 0x07010095 /* KEY_PROG2 */ - 0x070200ca /* KEY_PROG3 */ - 0x070300cb /* KEY_PROG4 */ - 0x0704003e /* KEY_F4 */ - 0x070500f0 /* KEY_UNKNOWN */ - 0x07060160 /* KEY_OK */ - 0x0707006c>; /* KEY_DOWN */ - linux,input-no-autorepeat; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; -}; diff --git a/trunk/arch/arm/boot/dts/omap4.dtsi b/trunk/arch/arm/boot/dts/omap4.dtsi index 5d1c48459e6e..04cbbcb6ff91 100644 --- a/trunk/arch/arm/boot/dts/omap4.dtsi +++ b/trunk/arch/arm/boot/dts/omap4.dtsi @@ -30,35 +30,12 @@ cpus { cpu@0 { compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; }; }; - gic: interrupt-controller@48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; - }; - - L2: l2-cache-controller@48242000 { - compatible = "arm,pl310-cache"; - reg = <0x48242000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - local-timer@0x48240600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x48240600 0x20>; - interrupts = <1 13 0x304>; - }; - /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -84,6 +61,30 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. + * + * MPU -+-- MPU_PRIVATE - GIC, L2 + * | + * +----------------+----------+ + * | | | + * + +- EMIF - DDR | + * | | | + * | + +--------+ + * | | | + * | +- L4_ABE - AESS, MCBSP, TIMERs... + * | | + * +- L3_MAIN --+- L4_CORE - IPs... + * | + * +- L4_PER - IPs... + * | + * +- L4_CFG -+- L4_WKUP - IPs... + * | | + * | +- IPs... + * +- IPU ----+ + * | | + * +- DSP ----+ + * | | + * +- DSS ----+ + * * Since that will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. @@ -95,27 +96,16 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - omap4_pmx_core: pinmux@4a100040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap4_pmx_wkup: pinmux@4a31e040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; }; gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; - reg = <0x4a310000 0x200>; - interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -125,8 +115,6 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -136,8 +124,6 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -147,8 +133,6 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -158,8 +142,6 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -169,8 +151,6 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -180,40 +160,30 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -221,8 +191,6 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -230,8 +198,6 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -239,8 +205,6 @@ i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; - reg = <0x48350000 0x100>; - interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -248,8 +212,6 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <0 65 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -258,8 +220,6 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <0 66 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -268,8 +228,6 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <0 91 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -278,8 +236,6 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <0 48 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -288,8 +244,6 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; - reg = <0x4809c000 0x400>; - interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -297,40 +251,30 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; - reg = <0x480b4000 0x400>; - interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; - reg = <0x480ad000 0x400>; - interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; - reg = <0x480d1000 0x400>; - interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; - reg = <0x480d5000 0x400>; - interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x4a314000 0x80>; - interrupts = <0 80 0x4>; ti,hwmods = "wd_timer2"; }; @@ -338,7 +282,6 @@ compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; @@ -348,87 +291,9 @@ compatible = "ti,omap4-dmic"; reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; - - mcbsp1: mcbsp@40122000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40122000 0xff>, /* MPU private access */ - <0x49022000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 17 0x4>; - interrupt-names = "common"; - interrupt-parent = <&gic>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - }; - - mcbsp2: mcbsp@40124000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40124000 0xff>, /* MPU private access */ - <0x49024000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 22 0x4>; - interrupt-names = "common"; - interrupt-parent = <&gic>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp2"; - }; - - mcbsp3: mcbsp@40126000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40126000 0xff>, /* MPU private access */ - <0x49026000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 23 0x4>; - interrupt-names = "common"; - interrupt-parent = <&gic>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - }; - - mcbsp4: mcbsp@48096000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x48096000 0xff>; /* L4 Interconnect */ - reg-names = "mpu"; - interrupts = <0 16 0x4>; - interrupt-names = "common"; - interrupt-parent = <&gic>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp4"; - }; - - keypad: keypad@4a31c000 { - compatible = "ti,omap4-keypad"; - reg = <0x4a31c000 0x80>; - interrupts = <0 120 0x4>; - reg-names = "mpu"; - ti,hwmods = "kbd"; - }; - - emif1: emif@4c000000 { - compatible = "ti,emif-4d"; - reg = <0x4c000000 0x100>; - interrupts = <0 110 0x4>; - ti,hwmods = "emif1"; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; - }; - - emif2: emif@4d000000 { - compatible = "ti,emif-4d"; - reg = <0x4d000000 0x100>; - interrupts = <0 111 0x4>; - ti,hwmods = "emif2"; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; - }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap5-evm.dts b/trunk/arch/arm/boot/dts/omap5-evm.dts index 9c41a3f311aa..200c39ad1c82 100644 --- a/trunk/arch/arm/boot/dts/omap5-evm.dts +++ b/trunk/arch/arm/boot/dts/omap5-evm.dts @@ -17,68 +17,4 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; - - vmmcsd_fixed: fixedregulator-mmcsd { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <4>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - bus-width = <4>; - ti,non-removable; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - status = "disabled"; -}; - -&i2c2 { - clock-frequency = <400000>; - - /* Pressure Sensor */ - bmp085@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; - - /* Temperature Sensor */ - tmp102@48{ - compatible = "ti,tmp102"; - reg = <0x48>; - }; -}; - -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = <0x02020073 /* VOLUP */ - 0x02030072 /* VOLDOWM */ - 0x020400e7 /* SEND */ - 0x02050066 /* HOME */ - 0x0206006b /* END */ - 0x020700d9>; /* SEARCH */ - linux,input-no-autorepeat; }; diff --git a/trunk/arch/arm/boot/dts/omap5.dtsi b/trunk/arch/arm/boot/dts/omap5.dtsi index 9ac75b37c992..57e527083746 100644 --- a/trunk/arch/arm/boot/dts/omap5.dtsi +++ b/trunk/arch/arm/boot/dts/omap5.dtsi @@ -145,41 +145,6 @@ #interrupt-cells = <1>; }; - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - }; - - i2c4: i2c@4807A000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - }; - - i2c5: i2c@4807C000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c5"; - }; - uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; @@ -215,97 +180,5 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; }; - - mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc4"; - ti,needs-special-reset; - }; - - mmc5: mmc@480d5000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc5"; - ti,needs-special-reset; - }; - - keypad: keypad@4ae1c000 { - compatible = "ti,omap4-keypad"; - ti,hwmods = "kbd"; - }; - - mcpdm: mcpdm@40132000 { - compatible = "ti,omap4-mcpdm"; - reg = <0x40132000 0x7f>, /* MPU private access */ - <0x49032000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; - ti,hwmods = "mcpdm"; - }; - - dmic: dmic@4012e000 { - compatible = "ti,omap4-dmic"; - reg = <0x4012e000 0x7f>, /* MPU private access */ - <0x4902e000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; - ti,hwmods = "dmic"; - }; - - mcbsp1: mcbsp@40122000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40122000 0xff>, /* MPU private access */ - <0x49022000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 17 0x4>; - interrupt-names = "common"; - interrupt-parent = <&gic>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - }; - - mcbsp2: mcbsp@40124000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40124000 0xff>, /* MPU private access */ - <0x49024000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 22 0x4>; - interrupt-names = "common"; - interrupt-parent = <&gic>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp2"; - }; - - mcbsp3: mcbsp@40126000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40126000 0xff>, /* MPU private access */ - <0x49026000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <0 23 0x4>; - interrupt-names = "common"; - interrupt-parent = <&gic>; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - }; }; }; diff --git a/trunk/arch/arm/boot/dts/tps65217.dtsi b/trunk/arch/arm/boot/dts/tps65217.dtsi deleted file mode 100644 index a63272422d76..000000000000 --- a/trunk/arch/arm/boot/dts/tps65217.dtsi +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/tps65217.pdf - */ - -&tps { - compatible = "ti,tps65217"; - - regulators { - #address-cells = <1>; - #size-cells = <0>; - - dcdc1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "dcdc1"; - }; - - dcdc2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "dcdc2"; - }; - - dcdc3_reg: regulator@2 { - reg = <2>; - regulator-compatible = "dcdc3"; - }; - - ldo1_reg: regulator@3 { - reg = <3>; - regulator-compatible = "ldo1"; - }; - - ldo2_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo2"; - }; - - ldo3_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo3"; - }; - - ldo4_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo4"; - }; - }; -}; diff --git a/trunk/arch/arm/boot/dts/tps65910.dtsi b/trunk/arch/arm/boot/dts/tps65910.dtsi deleted file mode 100644 index 92693a89160e..000000000000 --- a/trunk/arch/arm/boot/dts/tps65910.dtsi +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/tps65910.pdf - */ - -&tps { - compatible = "ti,tps65910"; - - regulators { - #address-cells = <1>; - #size-cells = <0>; - - vrtc_reg: regulator@0 { - reg = <0>; - regulator-compatible = "vrtc"; - }; - - vio_reg: regulator@1 { - reg = <1>; - regulator-compatible = "vio"; - }; - - vdd1_reg: regulator@2 { - reg = <2>; - regulator-compatible = "vdd1"; - }; - - vdd2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "vdd2"; - }; - - vdd3_reg: regulator@4 { - reg = <4>; - regulator-compatible = "vdd3"; - }; - - vdig1_reg: regulator@5 { - reg = <5>; - regulator-compatible = "vdig1"; - }; - - vdig2_reg: regulator@6 { - reg = <6>; - regulator-compatible = "vdig2"; - }; - - vpll_reg: regulator@7 { - reg = <7>; - regulator-compatible = "vpll"; - }; - - vdac_reg: regulator@8 { - reg = <8>; - regulator-compatible = "vdac"; - }; - - vaux1_reg: regulator@9 { - reg = <9>; - regulator-compatible = "vaux1"; - }; - - vaux2_reg: regulator@10 { - reg = <10>; - regulator-compatible = "vaux2"; - }; - - vaux33_reg: regulator@11 { - reg = <11>; - regulator-compatible = "vaux33"; - }; - - vmmc_reg: regulator@12 { - reg = <12>; - regulator-compatible = "vmmc"; - }; - }; -}; diff --git a/trunk/arch/arm/boot/dts/twl4030.dtsi b/trunk/arch/arm/boot/dts/twl4030.dtsi index ff000172c93c..22f4d1394ed3 100644 --- a/trunk/arch/arm/boot/dts/twl4030.dtsi +++ b/trunk/arch/arm/boot/dts/twl4030.dtsi @@ -19,19 +19,19 @@ interrupts = <11>; }; - vdac: regulator-vdac { + vdac: regulator@0 { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vpll2: regulator-vpll2 { + vpll2: regulator@1 { compatible = "ti,twl4030-vpll2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vmmc1: regulator-vmmc1 { + vmmc1: regulator@2 { compatible = "ti,twl4030-vmmc1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; diff --git a/trunk/arch/arm/boot/dts/twl6030.dtsi b/trunk/arch/arm/boot/dts/twl6030.dtsi index 123e2c40218a..d351b27d7213 100644 --- a/trunk/arch/arm/boot/dts/twl6030.dtsi +++ b/trunk/arch/arm/boot/dts/twl6030.dtsi @@ -20,70 +20,70 @@ interrupts = <11>; }; - vaux1: regulator-vaux1 { + vaux1: regulator@0 { compatible = "ti,twl6030-vaux1"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vaux2: regulator-vaux2 { + vaux2: regulator@1 { compatible = "ti,twl6030-vaux2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2800000>; }; - vaux3: regulator-vaux3 { + vaux3: regulator@2 { compatible = "ti,twl6030-vaux3"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vmmc: regulator-vmmc { + vmmc: regulator@3 { compatible = "ti,twl6030-vmmc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; }; - vpp: regulator-vpp { + vpp: regulator@4 { compatible = "ti,twl6030-vpp"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2500000>; }; - vusim: regulator-vusim { + vusim: regulator@5 { compatible = "ti,twl6030-vusim"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2900000>; }; - vdac: regulator-vdac { + vdac: regulator@6 { compatible = "ti,twl6030-vdac"; }; - vana: regulator-vana { + vana: regulator@7 { compatible = "ti,twl6030-vana"; }; - vcxio: regulator-vcxio { + vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; regulator-always-on; }; - vusb: regulator-vusb { + vusb: regulator@9 { compatible = "ti,twl6030-vusb"; }; - v1v8: regulator-v1v8 { + v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; regulator-always-on; }; - v2v1: regulator-v2v1 { + v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; regulator-always-on; }; - clk32kg: regulator-clk32kg { + clk32kg: regulator@12 { compatible = "ti,twl6030-clk32kg"; }; }; diff --git a/trunk/arch/arm/configs/omap2plus_defconfig b/trunk/arch/arm/configs/omap2plus_defconfig index 62303043db9c..e58edc36b406 100644 --- a/trunk/arch/arm/configs/omap2plus_defconfig +++ b/trunk/arch/arm/configs/omap2plus_defconfig @@ -123,7 +123,6 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y -CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y diff --git a/trunk/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/trunk/arch/arm/mach-omap1/ams-delta-fiq-handler.S index d2b6acce8fc1..a051cb8ae57f 100644 --- a/trunk/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/trunk/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -18,7 +18,6 @@ #include -#include #include #include "iomap.h" diff --git a/trunk/arch/arm/mach-omap1/board-ams-delta.c b/trunk/arch/arm/mach-omap1/board-ams-delta.c index 6f192c4900b1..c53469802c03 100644 --- a/trunk/arch/arm/mach-omap1/board-ams-delta.c +++ b/trunk/arch/arm/mach-omap1/board-ams-delta.c @@ -26,7 +26,6 @@ #include #include #include -#include #include @@ -38,6 +37,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-fsample.c b/trunk/arch/arm/mach-omap1/board-fsample.c index 6d985521a39e..6872f3fd400f 100644 --- a/trunk/arch/arm/mach-omap1/board-fsample.c +++ b/trunk/arch/arm/mach-omap1/board-fsample.c @@ -32,6 +32,7 @@ #include #include #include +#include #include diff --git a/trunk/arch/arm/mach-omap1/board-generic.c b/trunk/arch/arm/mach-omap1/board-generic.c index 04b5fdaff831..6ec385e2b98e 100644 --- a/trunk/arch/arm/mach-omap1/board-generic.c +++ b/trunk/arch/arm/mach-omap1/board-generic.c @@ -23,6 +23,7 @@ #include #include +#include #include @@ -51,6 +52,9 @@ static struct omap_usb_config generic1610_usb_config __initdata = { }; #endif +static struct omap_board_config_kernel generic_config[] __initdata = { +}; + static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX @@ -72,6 +76,8 @@ static void __init omap_generic_init(void) } #endif + omap_board_config = generic_config; + omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/trunk/arch/arm/mach-omap1/board-htcherald.c b/trunk/arch/arm/mach-omap1/board-htcherald.c index a5ac352d68d3..b3f6e943e661 100644 --- a/trunk/arch/arm/mach-omap1/board-htcherald.c +++ b/trunk/arch/arm/mach-omap1/board-htcherald.c @@ -41,7 +41,8 @@ #include #include -#include +#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-nokia770.c b/trunk/arch/arm/mach-omap1/board-nokia770.c index ec01f03d0446..2c0ca8fc3380 100644 --- a/trunk/arch/arm/mach-omap1/board-nokia770.c +++ b/trunk/arch/arm/mach-omap1/board-nokia770.c @@ -26,6 +26,7 @@ #include #include +#include #include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-osk.c b/trunk/arch/arm/mach-omap1/board-osk.c index 3b2d9071022a..8784705edb60 100644 --- a/trunk/arch/arm/mach-omap1/board-osk.c +++ b/trunk/arch/arm/mach-omap1/board-osk.c @@ -39,8 +39,6 @@ #include #include #include -#include -#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-palmte.c b/trunk/arch/arm/mach-omap1/board-palmte.c index 49f8d745ea1f..26bcb9defcdc 100644 --- a/trunk/arch/arm/mach-omap1/board-palmte.c +++ b/trunk/arch/arm/mach-omap1/board-palmte.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include @@ -38,6 +37,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-palmtt.c b/trunk/arch/arm/mach-omap1/board-palmtt.c index 01523cd78e58..4d099446dfa8 100644 --- a/trunk/arch/arm/mach-omap1/board-palmtt.c +++ b/trunk/arch/arm/mach-omap1/board-palmtt.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include @@ -38,6 +37,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-palmz71.c b/trunk/arch/arm/mach-omap1/board-palmz71.c index a7abce69043a..355980321c2d 100644 --- a/trunk/arch/arm/mach-omap1/board-palmz71.c +++ b/trunk/arch/arm/mach-omap1/board-palmz71.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include @@ -40,6 +39,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-perseus2.c b/trunk/arch/arm/mach-omap1/board-perseus2.c index 277e0bc60a43..703d55ecffe2 100644 --- a/trunk/arch/arm/mach-omap1/board-perseus2.c +++ b/trunk/arch/arm/mach-omap1/board-perseus2.c @@ -32,6 +32,7 @@ #include #include #include +#include #include diff --git a/trunk/arch/arm/mach-omap1/board-sx1.c b/trunk/arch/arm/mach-omap1/board-sx1.c index 2e1fff26a2f3..8c665bd16ac2 100644 --- a/trunk/arch/arm/mach-omap1/board-sx1.c +++ b/trunk/arch/arm/mach-omap1/board-sx1.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/board-voiceblue.c b/trunk/arch/arm/mach-omap1/board-voiceblue.c index 1668af3017de..3497769eb353 100644 --- a/trunk/arch/arm/mach-omap1/board-voiceblue.c +++ b/trunk/arch/arm/mach-omap1/board-voiceblue.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -154,6 +155,9 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; +static struct omap_board_config_kernel voiceblue_config[] = { +}; + #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -271,6 +275,8 @@ static void __init voiceblue_init(void) voiceblue_smc91x_resources[1].start = gpio_to_irq(8); voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); + omap_board_config = voiceblue_config; + omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); diff --git a/trunk/arch/arm/mach-omap1/clock_data.c b/trunk/arch/arm/mach-omap1/clock_data.c index 6a32b9b0dc30..c007d80dfb62 100644 --- a/trunk/arch/arm/mach-omap1/clock_data.c +++ b/trunk/arch/arm/mach-omap1/clock_data.c @@ -25,6 +25,7 @@ #include #include #include +#include #include /* for omap_sram_reprogram_clock() */ #include @@ -787,6 +788,7 @@ u32 cpu_mask; int __init omap1_clk_init(void) { struct omap_clk *c; + const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ u32 reg; @@ -835,6 +837,12 @@ int __init omap1_clk_init(void) ck_dpll1_p = clk_get(NULL, "ck_dpll1"); ck_ref_p = clk_get(NULL, "ck_ref"); + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap15xx()) + crystal_type = info->system_clock_type; + } + if (cpu_is_omap7xx()) ck_ref.rate = 13000000; if (cpu_is_omap16xx() && crystal_type == 2) diff --git a/trunk/arch/arm/mach-omap1/devices.c b/trunk/arch/arm/mach-omap1/devices.c index 05fdbd992c77..fa1fa4deb6aa 100644 --- a/trunk/arch/arm/mach-omap1/devices.c +++ b/trunk/arch/arm/mach-omap1/devices.c @@ -20,11 +20,12 @@ #include #include +#include #include #include #include +#include -#include #include #include diff --git a/trunk/arch/arm/mach-omap1/dma.c b/trunk/arch/arm/mach-omap1/dma.c index b0b0f0f27450..3ef7d52316b4 100644 --- a/trunk/arch/arm/mach-omap1/dma.c +++ b/trunk/arch/arm/mach-omap1/dma.c @@ -27,8 +27,7 @@ #include #include - -#include +#include #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 diff --git a/trunk/arch/arm/mach-omap1/gpio15xx.c b/trunk/arch/arm/mach-omap1/gpio15xx.c index 98e6f39224a4..ebef15e5e7b7 100644 --- a/trunk/arch/arm/mach-omap1/gpio15xx.c +++ b/trunk/arch/arm/mach-omap1/gpio15xx.c @@ -17,7 +17,6 @@ */ #include -#include #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/trunk/arch/arm/mach-omap1/gpio16xx.c b/trunk/arch/arm/mach-omap1/gpio16xx.c index 33f419236b17..2a48cd2e1754 100644 --- a/trunk/arch/arm/mach-omap1/gpio16xx.c +++ b/trunk/arch/arm/mach-omap1/gpio16xx.c @@ -17,7 +17,6 @@ */ #include -#include #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 diff --git a/trunk/arch/arm/mach-omap1/gpio7xx.c b/trunk/arch/arm/mach-omap1/gpio7xx.c index 958ce9acee95..acf12b73eace 100644 --- a/trunk/arch/arm/mach-omap1/gpio7xx.c +++ b/trunk/arch/arm/mach-omap1/gpio7xx.c @@ -17,7 +17,6 @@ */ #include -#include #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 diff --git a/trunk/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/trunk/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index adb5e7649659..23eed0035ed8 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/trunk/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,6 +14,8 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H +#include + /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. diff --git a/trunk/arch/arm/mach-omap1/include/mach/gpio.h b/trunk/arch/arm/mach-omap1/include/mach/gpio.h index ebf86c0f4f46..e737706a8fe1 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/gpio.h +++ b/trunk/arch/arm/mach-omap1/include/mach/gpio.h @@ -1,3 +1,5 @@ /* * arch/arm/mach-omap1/include/mach/gpio.h */ + +#include diff --git a/trunk/arch/arm/mach-omap1/include/mach/hardware.h b/trunk/arch/arm/mach-omap1/include/mach/hardware.h index 84248d250adb..01e35fa106b8 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/hardware.h +++ b/trunk/arch/arm/mach-omap1/include/mach/hardware.h @@ -1,46 +1,11 @@ /* * arch/arm/mach-omap1/include/mach/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon - * - * Reorganized for Linux-2.6 by Tony Lindgren - * and Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H -#include #ifndef __ASSEMBLER__ -#include -#include - /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ @@ -70,249 +35,7 @@ static inline u32 omap_cs3_phys(void) ? 0 : OMAP_CS3_PHYS; } -#endif /* ifndef __ASSEMBLER__ */ - -#include - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - +#endif #endif -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include "omap7xx.h" -#include "omap1510.h" -#include "omap16xx.h" - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ +#include diff --git a/trunk/arch/arm/mach-omap1/include/mach/irqs.h b/trunk/arch/arm/mach-omap1/include/mach/irqs.h index 729992d7d26a..9292fdc1cb0b 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/irqs.h +++ b/trunk/arch/arm/mach-omap1/include/mach/irqs.h @@ -1,268 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. + * arch/arm/mach-omap1/include/mach/irqs.h */ -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 1 - */ -#define INT_7XX_IH2_FIQ 0 -#define INT_7XX_IH2_IRQ 1 -#define INT_7XX_USB_NON_ISO 2 -#define INT_7XX_USB_ISO 3 -#define INT_7XX_ICR 4 -#define INT_7XX_EAC 5 -#define INT_7XX_GPIO_BANK1 6 -#define INT_7XX_GPIO_BANK2 7 -#define INT_7XX_GPIO_BANK3 8 -#define INT_7XX_McBSP2TX 10 -#define INT_7XX_McBSP2RX 11 -#define INT_7XX_McBSP2RX_OVF 12 -#define INT_7XX_LCD_LINE 14 -#define INT_7XX_GSM_PROTECT 15 -#define INT_7XX_TIMER3 16 -#define INT_7XX_GPIO_BANK5 17 -#define INT_7XX_GPIO_BANK6 18 -#define INT_7XX_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_SOSSI_MATCH (19 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) -#define INT_1610_SHA1MD5 (91 + IH2_BASE) - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 2 - */ -#define INT_7XX_HW_ERRORS (0 + IH2_BASE) -#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_7XX_CFCD (2 + IH2_BASE) -#define INT_7XX_CFIREQ (3 + IH2_BASE) -#define INT_7XX_I2C (4 + IH2_BASE) -#define INT_7XX_PCC (5 + IH2_BASE) -#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) -#define INT_7XX_SYREN_SPI (8 + IH2_BASE) -#define INT_7XX_VLYNQ (9 + IH2_BASE) -#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) -#define INT_7XX_McBSP1TX (11 + IH2_BASE) -#define INT_7XX_McBSP1RX (12 + IH2_BASE) -#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) -#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) -#define INT_7XX_MCSI (16 + IH2_BASE) -#define INT_7XX_uWireTX (17 + IH2_BASE) -#define INT_7XX_uWireRX (18 + IH2_BASE) -#define INT_7XX_SMC_CD (19 + IH2_BASE) -#define INT_7XX_SMC_IREQ (20 + IH2_BASE) -#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) -#define INT_7XX_TIMER32K (22 + IH2_BASE) -#define INT_7XX_MMC_SDIO (23 + IH2_BASE) -#define INT_7XX_UPLD (24 + IH2_BASE) -#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) -#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) -#define INT_7XX_USB_GENI (29 + IH2_BASE) -#define INT_7XX_USB_OTG (30 + IH2_BASE) -#define INT_7XX_CAMERA_IF (31 + IH2_BASE) -#define INT_7XX_RNG (32 + IH2_BASE) -#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) -#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) -#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) -#define INT_7XX_RNG_IDLE (38 + IH2_BASE) -#define INT_7XX_MPUIO (39 + IH2_BASE) -#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) -#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_7XX_DMA_CH6 (53 + IH2_BASE) -#define INT_7XX_DMA_CH7 (54 + IH2_BASE) -#define INT_7XX_DMA_CH8 (55 + IH2_BASE) -#define INT_7XX_DMA_CH9 (56 + IH2_BASE) -#define INT_7XX_DMA_CH10 (57 + IH2_BASE) -#define INT_7XX_DMA_CH11 (58 + IH2_BASE) -#define INT_7XX_DMA_CH12 (59 + IH2_BASE) -#define INT_7XX_DMA_CH13 (60 + IH2_BASE) -#define INT_7XX_DMA_CH14 (61 + IH2_BASE) -#define INT_7XX_DMA_CH15 (62 + IH2_BASE) -#define INT_7XX_NAND (63 + IH2_BASE) - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -#define NR_IRQS OMAP_FPGA_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#include - -#ifdef CONFIG_FIQ -#define FIQ_START 1024 -#endif - -#endif +#include diff --git a/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c b/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c index 7f4bba9fa02e..f6b14a14a957 100644 --- a/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/trunk/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-omap1/leds.c b/trunk/arch/arm/mach-omap1/leds.c index 7b1a3833165d..ae6dd93b8ddc 100644 --- a/trunk/arch/arm/mach-omap1/leds.c +++ b/trunk/arch/arm/mach-omap1/leds.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-omap1/serial.c b/trunk/arch/arm/mach-omap1/serial.c index 0d1709b1a6fe..6809c9e56c93 100644 --- a/trunk/arch/arm/mach-omap1/serial.c +++ b/trunk/arch/arm/mach-omap1/serial.c @@ -22,6 +22,7 @@ #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap2/Kconfig b/trunk/arch/arm/mach-omap2/Kconfig index eef99b77c40b..4b773fd56978 100644 --- a/trunk/arch/arm/mach-omap2/Kconfig +++ b/trunk/arch/arm/mach-omap2/Kconfig @@ -18,13 +18,15 @@ config ARCH_OMAP2PLUS_TYPICAL select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 select HIGHMEM - select PINCTRL help Compile a kernel suitable for booting most boards config SOC_HAS_OMAP2_SDRC bool "OMAP2 SDRAM Controller support" +config SOC_HAS_REALTIME_COUNTER + bool "Real time free running counter" + config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_OMAP2PLUS @@ -71,6 +73,7 @@ config SOC_OMAP5 select ARM_GIC select HAVE_SMP select ARM_CPU_SUSPEND if PM + select SOC_HAS_REALTIME_COUNTER comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/trunk/arch/arm/mach-omap2/Makefile.boot b/trunk/arch/arm/mach-omap2/Makefile.boot index be0fe9226d67..b03e562acc60 100644 --- a/trunk/arch/arm/mach-omap2/Makefile.boot +++ b/trunk/arch/arm/mach-omap2/Makefile.boot @@ -1,9 +1,3 @@ zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 - -dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb -dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb -dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb -dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb diff --git a/trunk/arch/arm/mach-omap2/board-2430sdp.c b/trunk/arch/arm/mach-omap2/board-2430sdp.c index 0900eac57d56..9511584fdc4f 100644 --- a/trunk/arch/arm/mach-omap2/board-2430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-2430sdp.c @@ -33,6 +33,7 @@ #include #include +#include #include "common.h" #include #include @@ -211,6 +212,9 @@ static struct regulator_init_data sdp2430_vmmc1 = { }; static struct twl4030_gpio_platform_data sdp2430_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, }; static struct twl4030_platform_data sdp2430_twldata = { @@ -231,7 +235,7 @@ static int __init omap2430_i2c_init(void) sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78); omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START, + omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, &sdp2430_twldata); return 0; } diff --git a/trunk/arch/arm/mach-omap2/board-3430sdp.c b/trunk/arch/arm/mach-omap2/board-3430sdp.c index 5453173ff57b..a98c688058a9 100644 --- a/trunk/arch/arm/mach-omap2/board-3430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-3430sdp.c @@ -25,11 +25,13 @@ #include #include +#include #include #include #include #include +#include #include #include "common.h" #include @@ -189,6 +191,9 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; +static struct omap_board_config_kernel sdp3430_config[] __initdata = { +}; + static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -228,6 +233,9 @@ static int sdp3430_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data sdp3430_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(16) | BIT(17), .setup = sdp3430_twl_gpio_setup, @@ -568,6 +576,8 @@ static void __init omap_3430sdp_init(void) int gpio_pendown; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = sdp3430_config; + omap_board_config_size = ARRAY_SIZE(sdp3430_config); omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); diff --git a/trunk/arch/arm/mach-omap2/board-3630sdp.c b/trunk/arch/arm/mach-omap2/board-3630sdp.c index 8518b1345988..2dc9ba523c7a 100644 --- a/trunk/arch/arm/mach-omap2/board-3630sdp.c +++ b/trunk/arch/arm/mach-omap2/board-3630sdp.c @@ -17,6 +17,7 @@ #include #include "common.h" +#include #include #include @@ -66,6 +67,9 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct omap_board_config_kernel sdp_config[] __initdata = { +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -193,6 +197,8 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); + omap_board_config = sdp_config; + omap_board_config_size = ARRAY_SIZE(sdp_config); zoom_peripherals_init(); omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); diff --git a/trunk/arch/arm/mach-omap2/board-4430sdp.c b/trunk/arch/arm/mach-omap2/board-4430sdp.c index db43e22526c0..ad8a7d94afcd 100644 --- a/trunk/arch/arm/mach-omap2/board-4430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-4430sdp.c @@ -28,11 +28,13 @@ #include #include +#include #include #include #include #include +#include #include "common.h" #include #include @@ -43,7 +45,6 @@ #include #include -#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "control.h" @@ -543,6 +544,7 @@ static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, + .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { @@ -579,7 +581,7 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &sdp4430_twldata, - &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/trunk/arch/arm/mach-omap2/board-am3517crane.c b/trunk/arch/arm/mach-omap2/board-am3517crane.c index 318feadb1d6e..92432c28673d 100644 --- a/trunk/arch/arm/mach-omap2/board-am3517crane.c +++ b/trunk/arch/arm/mach-omap2/board-am3517crane.c @@ -21,10 +21,12 @@ #include #include +#include #include #include #include +#include #include "common.h" #include @@ -35,6 +37,11 @@ #define GPIO_USB_POWER 35 #define GPIO_USB_NRESET 38 + +/* Board initialization */ +static struct omap_board_config_kernel am3517_crane_config[] __initdata = { +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -60,6 +67,9 @@ static void __init am3517_crane_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); + omap_board_config = am3517_crane_config; + omap_board_config_size = ARRAY_SIZE(am3517_crane_config); + /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { pr_err("Can not configure mux for GPIO_USB_NRESET %d\n", diff --git a/trunk/arch/arm/mach-omap2/board-am3517evm.c b/trunk/arch/arm/mach-omap2/board-am3517evm.c index 403d048a00ee..18f601096ce1 100644 --- a/trunk/arch/arm/mach-omap2/board-am3517evm.c +++ b/trunk/arch/arm/mach-omap2/board-am3517evm.c @@ -25,13 +25,14 @@ #include #include #include -#include +#include #include #include #include #include +#include #include "common.h" #include #include