diff --git a/[refs] b/[refs] index e6c5b33dbaa3..9daddb91b879 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 0915e8865fe4684dc82f043ac7036f34bf89f52a +refs/heads/master: ae01d2798d1825307044d75de11eb5c9ffb79c5a diff --git a/trunk/Documentation/cciss.txt b/trunk/Documentation/cciss.txt index c8f9a73111da..68a711fb82cf 100644 --- a/trunk/Documentation/cciss.txt +++ b/trunk/Documentation/cciss.txt @@ -17,7 +17,9 @@ This driver is known to work with the following cards: * SA P600 * SA P800 * SA E400 - * SA E300 + * SA P400i + * SA E200 + * SA E200i If nodes are not already created in the /dev/cciss directory, run as root: diff --git a/trunk/Documentation/connector/cn_test.c b/trunk/Documentation/connector/cn_test.c new file mode 100644 index 000000000000..b7de82e9c0e0 --- /dev/null +++ b/trunk/Documentation/connector/cn_test.c @@ -0,0 +1,194 @@ +/* + * cn_test.c + * + * 2004-2005 Copyright (c) Evgeniy Polyakov + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include "connector.h" + +static struct cb_id cn_test_id = { 0x123, 0x456 }; +static char cn_test_name[] = "cn_test"; +static struct sock *nls; +static struct timer_list cn_test_timer; + +void cn_test_callback(void *data) +{ + struct cn_msg *msg = (struct cn_msg *)data; + + printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n", + __func__, jiffies, msg->id.idx, msg->id.val, + msg->seq, msg->ack, msg->len, (char *)msg->data); +} + +static int cn_test_want_notify(void) +{ + struct cn_ctl_msg *ctl; + struct cn_notify_req *req; + struct cn_msg *msg = NULL; + int size, size0; + struct sk_buff *skb; + struct nlmsghdr *nlh; + u32 group = 1; + + size0 = sizeof(*msg) + sizeof(*ctl) + 3 * sizeof(*req); + + size = NLMSG_SPACE(size0); + + skb = alloc_skb(size, GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "Failed to allocate new skb with size=%u.\n", + size); + + return -ENOMEM; + } + + nlh = NLMSG_PUT(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh)); + + msg = (struct cn_msg *)NLMSG_DATA(nlh); + + memset(msg, 0, size0); + + msg->id.idx = -1; + msg->id.val = -1; + msg->seq = 0x123; + msg->ack = 0x345; + msg->len = size0 - sizeof(*msg); + + ctl = (struct cn_ctl_msg *)(msg + 1); + + ctl->idx_notify_num = 1; + ctl->val_notify_num = 2; + ctl->group = group; + ctl->len = msg->len - sizeof(*ctl); + + req = (struct cn_notify_req *)(ctl + 1); + + /* + * Idx. + */ + req->first = cn_test_id.idx; + req->range = 10; + + /* + * Val 0. + */ + req++; + req->first = cn_test_id.val; + req->range = 10; + + /* + * Val 1. + */ + req++; + req->first = cn_test_id.val + 20; + req->range = 10; + + NETLINK_CB(skb).dst_groups = ctl->group; + //netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC); + netlink_unicast(nls, skb, 0, 0); + + printk(KERN_INFO "Request was sent. Group=0x%x.\n", ctl->group); + + return 0; + +nlmsg_failure: + printk(KERN_ERR "Failed to send %u.%u\n", msg->seq, msg->ack); + kfree_skb(skb); + return -EINVAL; +} + +static u32 cn_test_timer_counter; +static void cn_test_timer_func(unsigned long __data) +{ + struct cn_msg *m; + char data[32]; + + m = kmalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC); + if (m) { + memset(m, 0, sizeof(*m) + sizeof(data)); + + memcpy(&m->id, &cn_test_id, sizeof(m->id)); + m->seq = cn_test_timer_counter; + m->len = sizeof(data); + + m->len = + scnprintf(data, sizeof(data), "counter = %u", + cn_test_timer_counter) + 1; + + memcpy(m + 1, data, m->len); + + cn_netlink_send(m, 0, gfp_any()); + kfree(m); + } + + cn_test_timer_counter++; + + mod_timer(&cn_test_timer, jiffies + HZ); +} + +static int cn_test_init(void) +{ + int err; + + err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback); + if (err) + goto err_out; + cn_test_id.val++; + err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback); + if (err) { + cn_del_callback(&cn_test_id); + goto err_out; + } + + init_timer(&cn_test_timer); + cn_test_timer.function = cn_test_timer_func; + cn_test_timer.expires = jiffies + HZ; + cn_test_timer.data = 0; + add_timer(&cn_test_timer); + + return 0; + + err_out: + if (nls && nls->sk_socket) + sock_release(nls->sk_socket); + + return err; +} + +static void cn_test_fini(void) +{ + del_timer_sync(&cn_test_timer); + cn_del_callback(&cn_test_id); + cn_test_id.val--; + cn_del_callback(&cn_test_id); + if (nls && nls->sk_socket) + sock_release(nls->sk_socket); +} + +module_init(cn_test_init); +module_exit(cn_test_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_DESCRIPTION("Connector's test module"); diff --git a/trunk/Documentation/connector/connector.txt b/trunk/Documentation/connector/connector.txt new file mode 100644 index 000000000000..54a0a14bfbe3 --- /dev/null +++ b/trunk/Documentation/connector/connector.txt @@ -0,0 +1,133 @@ +/*****************************************/ +Kernel Connector. +/*****************************************/ + +Kernel connector - new netlink based userspace <-> kernel space easy +to use communication module. + +Connector driver adds possibility to connect various agents using +netlink based network. One must register callback and +identifier. When driver receives special netlink message with +appropriate identifier, appropriate callback will be called. + +From the userspace point of view it's quite straightforward: + + socket(); + bind(); + send(); + recv(); + +But if kernelspace want to use full power of such connections, driver +writer must create special sockets, must know about struct sk_buff +handling... Connector allows any kernelspace agents to use netlink +based networking for inter-process communication in a significantly +easier way: + +int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *)); +void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask); + +struct cb_id +{ + __u32 idx; + __u32 val; +}; + +idx and val are unique identifiers which must be registered in +connector.h for in-kernel usage. void (*callback) (void *) - is a +callback function which will be called when message with above idx.val +will be received by connector core. Argument for that function must +be dereferenced to struct cn_msg *. + +struct cn_msg +{ + struct cb_id id; + + __u32 seq; + __u32 ack; + + __u32 len; /* Length of the following data */ + __u8 data[0]; +}; + +/*****************************************/ +Connector interfaces. +/*****************************************/ + +int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *)); + +Registers new callback with connector core. + +struct cb_id *id - unique connector's user identifier. + It must be registered in connector.h for legal in-kernel users. +char *name - connector's callback symbolic name. +void (*callback) (void *) - connector's callback. + Argument must be dereferenced to struct cn_msg *. + +void cn_del_callback(struct cb_id *id); + +Unregisters new callback with connector core. + +struct cb_id *id - unique connector's user identifier. + +void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); + +Sends message to the specified groups. It can be safely called from +any context, but may silently fail under strong memory pressure. + +struct cn_msg * - message header(with attached data). +u32 __group - destination group. + If __group is zero, then appropriate group will + be searched through all registered connector users, + and message will be delivered to the group which was + created for user with the same ID as in msg. + If __group is not zero, then message will be delivered + to the specified group. +int gfp_mask - GFP mask. + +Note: When registering new callback user, connector core assigns +netlink group to the user which is equal to it's id.idx. + +/*****************************************/ +Protocol description. +/*****************************************/ + +Current offers transport layer with fixed header. Recommended +protocol which uses such header is following: + +msg->seq and msg->ack are used to determine message genealogy. When +someone sends message it puts there locally unique sequence and random +acknowledge numbers. Sequence number may be copied into +nlmsghdr->nlmsg_seq too. + +Sequence number is incremented with each message to be sent. + +If we expect reply to our message, then sequence number in received +message MUST be the same as in original message, and acknowledge +number MUST be the same + 1. + +If we receive message and it's sequence number is not equal to one we +are expecting, then it is new message. If we receive message and it's +sequence number is the same as one we are expecting, but it's +acknowledge is not equal acknowledge number in original message + 1, +then it is new message. + +Obviously, protocol header contains above id. + +connector allows event notification in the following form: kernel +driver or userspace process can ask connector to notify it when +selected id's will be turned on or off(registered or unregistered it's +callback). It is done by sending special command to connector +driver(it also registers itself with id={-1, -1}). + +As example of usage Documentation/connector now contains cn_test.c - +testing module which uses connector to request notification and to +send messages. + +/*****************************************/ +Reliability. +/*****************************************/ + +Netlink itself is not reliable protocol, that means that messages can +be lost due to memory pressure or process' receiving queue overflowed, +so caller is warned must be prepared. That is why struct cn_msg [main +connector's message header] contains u32 seq and u32 ack fields. diff --git a/trunk/Documentation/dontdiff b/trunk/Documentation/dontdiff index 96bea278bbf6..24adfe9af3ca 100644 --- a/trunk/Documentation/dontdiff +++ b/trunk/Documentation/dontdiff @@ -55,6 +55,7 @@ aic7*seq.h* aicasm aicdb.h* asm +asm-offsets.* asm_offsets.* autoconf.h* bbootsect diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt index 784e08c1c80a..b67189a8d8d4 100644 --- a/trunk/Documentation/feature-removal-schedule.txt +++ b/trunk/Documentation/feature-removal-schedule.txt @@ -17,15 +17,6 @@ Who: Greg Kroah-Hartman --------------------------- -What: io_remap_page_range() (macro or function) -When: September 2005 -Why: Replaced by io_remap_pfn_range() which allows more memory space - addressabilty (by using a pfn) and supports sparc & sparc64 - iospace as part of the pfn. -Who: Randy Dunlap - ---------------------------- - What: RAW driver (CONFIG_RAW_DRIVER) When: December 2005 Why: declared obsolete since kernel 2.6.3 diff --git a/trunk/Documentation/kdump/kdump.txt b/trunk/Documentation/kdump/kdump.txt index 1f5f7d28c9e6..5f08f9ce6046 100644 --- a/trunk/Documentation/kdump/kdump.txt +++ b/trunk/Documentation/kdump/kdump.txt @@ -66,11 +66,11 @@ SETUP c) Enable "/proc/vmcore support" (Optional, in Pseudo filesystems). CONFIG_PROC_VMCORE=y d) Disable SMP support and build a UP kernel (Until it is fixed). - CONFIG_SMP=n + CONFIG_SMP=n e) Enable "Local APIC support on uniprocessors". - CONFIG_X86_UP_APIC=y + CONFIG_X86_UP_APIC=y f) Enable "IO-APIC support on uniprocessors" - CONFIG_X86_UP_IOAPIC=y + CONFIG_X86_UP_IOAPIC=y Note: i) Options a) and b) depend upon "Configure standard kernel features (for small systems)" (under General setup). @@ -95,6 +95,11 @@ SETUP hence have memory less than 4GB. iii) Specify "irqpoll" as command line parameter. This reduces driver initialization failures in second kernel due to shared interrupts. + iv) needs to be specified in a format corresponding to + the root device name in the output of mount command. + v) If you have built the drivers required to mount root file + system as modules in , then, specify + --initrd=. 5) System reboots into the second kernel when a panic occurs. A module can be written to force the panic or "ALT-SysRq-c" can be used initiate a crash diff --git a/trunk/Documentation/oops-tracing.txt b/trunk/Documentation/oops-tracing.txt index da711028e5f7..66eaaab7773d 100644 --- a/trunk/Documentation/oops-tracing.txt +++ b/trunk/Documentation/oops-tracing.txt @@ -205,8 +205,8 @@ Phone: 701-234-7556 Tainted kernels: Some oops reports contain the string 'Tainted: ' after the program -counter, this indicates that the kernel has been tainted by some -mechanism. The string is followed by a series of position sensitive +counter. This indicates that the kernel has been tainted by some +mechanism. The string is followed by a series of position-sensitive characters, each representing a particular tainted value. 1: 'G' if all modules loaded have a GPL or compatible license, 'P' if @@ -214,16 +214,25 @@ characters, each representing a particular tainted value. MODULE_LICENSE or with a MODULE_LICENSE that is not recognised by insmod as GPL compatible are assumed to be proprietary. - 2: 'F' if any module was force loaded by insmod -f, ' ' if all + 2: 'F' if any module was force loaded by "insmod -f", ' ' if all modules were loaded normally. 3: 'S' if the oops occurred on an SMP kernel running on hardware that - hasn't been certified as safe to run multiprocessor. - Currently this occurs only on various Athlons that are not - SMP capable. + hasn't been certified as safe to run multiprocessor. + Currently this occurs only on various Athlons that are not + SMP capable. + + 4: 'R' if a module was force unloaded by "rmmod -f", ' ' if all + modules were unloaded normally. + + 5: 'M' if any processor has reported a Machine Check Exception, + ' ' if no Machine Check Exceptions have occurred. + + 6: 'B' if a page-release function has found a bad page reference or + some unexpected page flags. The primary reason for the 'Tainted: ' string is to tell kernel debuggers if this is a clean kernel or if anything unusual has -occurred. Tainting is permanent, even if an offending module is -unloading the tainted value remains to indicate that the kernel is not +occurred. Tainting is permanent: even if an offending module is +unloaded, the tainted value remains to indicate that the kernel is not trustworthy. diff --git a/trunk/Documentation/pm.txt b/trunk/Documentation/pm.txt index cc63ae18d147..2ea1149bf6b0 100644 --- a/trunk/Documentation/pm.txt +++ b/trunk/Documentation/pm.txt @@ -38,6 +38,12 @@ system the associated daemon will exit gracefully. Driver Interface -- OBSOLETE, DO NOT USE! ----------------************************* + +Note: pm_register(), pm_access(), pm_dev_idle() and friends are +obsolete. Please do not use them. Instead you should properly hook +your driver into the driver model, and use its suspend()/resume() +callbacks to do this kind of stuff. + If you are writing a new driver or maintaining an old driver, it should include power management support. Without power management support, a single driver may prevent a system with power management diff --git a/trunk/Documentation/scsi/00-INDEX b/trunk/Documentation/scsi/00-INDEX index f9cb5bdcce41..fef92ebf266f 100644 --- a/trunk/Documentation/scsi/00-INDEX +++ b/trunk/Documentation/scsi/00-INDEX @@ -60,6 +60,8 @@ scsi.txt - short blurb on using SCSI support as a module. scsi_mid_low_api.txt - info on API between SCSI layer and low level drivers +scsi_eh.txt + - info on SCSI midlayer error handling infrastructure st.txt - info on scsi tape driver sym53c500_cs.txt diff --git a/trunk/Documentation/scsi/scsi_eh.txt b/trunk/Documentation/scsi/scsi_eh.txt new file mode 100644 index 000000000000..534a50922a7b --- /dev/null +++ b/trunk/Documentation/scsi/scsi_eh.txt @@ -0,0 +1,479 @@ + +SCSI EH +====================================== + + This document describes SCSI midlayer error handling infrastructure. +Please refer to Documentation/scsi/scsi_mid_low_api.txt for more +information regarding SCSI midlayer. + +TABLE OF CONTENTS + +[1] How SCSI commands travel through the midlayer and to EH + [1-1] struct scsi_cmnd + [1-2] How do scmd's get completed? + [1-2-1] Completing a scmd w/ scsi_done + [1-2-2] Completing a scmd w/ timeout + [1-3] How EH takes over +[2] How SCSI EH works + [2-1] EH through fine-grained callbacks + [2-1-1] Overview + [2-1-2] Flow of scmds through EH + [2-1-3] Flow of control + [2-2] EH through hostt->eh_strategy_handler() + [2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions + [2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions + [2-2-3] Things to consider + + +[1] How SCSI commands travel through the midlayer and to EH + +[1-1] struct scsi_cmnd + + Each SCSI command is represented with struct scsi_cmnd (== scmd). A +scmd has two list_head's to link itself into lists. The two are +scmd->list and scmd->eh_entry. The former is used for free list or +per-device allocated scmd list and not of much interest to this EH +discussion. The latter is used for completion and EH lists and unless +otherwise stated scmds are always linked using scmd->eh_entry in this +discussion. + + +[1-2] How do scmd's get completed? + + Once LLDD gets hold of a scmd, either the LLDD will complete the +command by calling scsi_done callback passed from midlayer when +invoking hostt->queuecommand() or SCSI midlayer will time it out. + + +[1-2-1] Completing a scmd w/ scsi_done + + For all non-EH commands, scsi_done() is the completion callback. It +does the following. + + 1. Delete timeout timer. If it fails, it means that timeout timer + has expired and is going to finish the command. Just return. + + 2. Link scmd to per-cpu scsi_done_q using scmd->en_entry + + 3. Raise SCSI_SOFTIRQ + + SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to +determine what to do with the command. scsi_decide_disposition() +looks at the scmd->result value and sense data to determine what to do +with the command. + + - SUCCESS + scsi_finish_command() is invoked for the command. The + function does some maintenance choirs and notify completion by + calling scmd->done() callback, which, for fs requests, would + be HLD completion callback - sd:sd_rw_intr, sr:rw_intr, + st:st_intr. + + - NEEDS_RETRY + - ADD_TO_MLQUEUE + scmd is requeued to blk queue. + + - otherwise + scsi_eh_scmd_add(scmd, 0) is invoked for the command. See + [1-3] for details of this funciton. + + +[1-2-2] Completing a scmd w/ timeout + + The timeout handler is scsi_times_out(). When a timeout occurs, this +function + + 1. invokes optional hostt->eh_timedout() callback. Return value can + be one of + + - EH_HANDLED + This indicates that eh_timedout() dealt with the timeout. The + scmd is passed to __scsi_done() and thus linked into per-cpu + scsi_done_q. Normal command completion described in [1-2-1] + follows. + + - EH_RESET_TIMER + This indicates that more time is required to finish the + command. Timer is restarted. This action is counted as a + retry and only allowed scmd->allowed + 1(!) times. Once the + limit is reached, action for EH_NOT_HANDLED is taken instead. + + *NOTE* This action is racy as the LLDD could finish the scmd + after the timeout has expired but before it's added back. In + such cases, scsi_done() would think that timeout has occurred + and return without doing anything. We lose completion and the + command will time out again. + + - EH_NOT_HANDLED + This is the same as when eh_timedout() callback doesn't exist. + Step #2 is taken. + + 2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the + command. See [1-3] for more information. + + +[1-3] How EH takes over + + scmds enter EH via scsi_eh_scmd_add(), which does the following. + + 1. Turns on scmd->eh_eflags as requested. It's 0 for error + completions and SCSI_EH_CANCEL_CMD for timeouts. + + 2. Links scmd->eh_entry to shost->eh_cmd_q + + 3. Sets SHOST_RECOVERY bit in shost->shost_state + + 4. Increments shost->host_failed + + 5. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed + + As can be seen above, once any scmd is added to shost->eh_cmd_q, +SHOST_RECOVERY shost_state bit is turned on. This prevents any new +scmd to be issued from blk queue to the host; eventually, all scmds on +the host either complete normally, fail and get added to eh_cmd_q, or +time out and get added to shost->eh_cmd_q. + + If all scmds either complete or fail, the number of in-flight scmds +becomes equal to the number of failed scmds - i.e. shost->host_busy == +shost->host_failed. This wakes up SCSI EH thread. So, once woken up, +SCSI EH thread can expect that all in-flight commands have failed and +are linked on shost->eh_cmd_q. + + Note that this does not mean lower layers are quiescent. If a LLDD +completed a scmd with error status, the LLDD and lower layers are +assumed to forget about the scmd at that point. However, if a scmd +has timed out, unless hostt->eh_timedout() made lower layers forget +about the scmd, which currently no LLDD does, the command is still +active as long as lower layers are concerned and completion could +occur at any time. Of course, all such completions are ignored as the +timer has already expired. + + We'll talk about how SCSI EH takes actions to abort - make LLDD +forget about - timed out scmds later. + + +[2] How SCSI EH works + + LLDD's can implement SCSI EH actions in one of the following two +ways. + + - Fine-grained EH callbacks + LLDD can implement fine-grained EH callbacks and let SCSI + midlayer drive error handling and call appropriate callbacks. + This will be dicussed further in [2-1]. + + - eh_strategy_handler() callback + This is one big callback which should perform whole error + handling. As such, it should do all choirs SCSI midlayer + performs during recovery. This will be discussed in [2-2]. + + Once recovery is complete, SCSI EH resumes normal operation by +calling scsi_restart_operations(), which + + 1. Checks if door locking is needed and locks door. + + 2. Clears SHOST_RECOVERY shost_state bit + + 3. Wakes up waiters on shost->host_wait. This occurs if someone + calls scsi_block_when_processing_errors() on the host. + (*QUESTION* why is it needed? All operations will be blocked + anyway after it reaches blk queue.) + + 4. Kicks queues in all devices on the host in the asses + + +[2-1] EH through fine-grained callbacks + +[2-1-1] Overview + + If eh_strategy_handler() is not present, SCSI midlayer takes charge +of driving error handling. EH's goals are two - make LLDD, host and +device forget about timed out scmds and make them ready for new +commands. A scmd is said to be recovered if the scmd is forgotten by +lower layers and lower layers are ready to process or fail the scmd +again. + + To achieve these goals, EH performs recovery actions with increasing +severity. Some actions are performed by issueing SCSI commands and +others are performed by invoking one of the following fine-grained +hostt EH callbacks. Callbacks may be omitted and omitted ones are +considered to fail always. + +int (* eh_abort_handler)(struct scsi_cmnd *); +int (* eh_device_reset_handler)(struct scsi_cmnd *); +int (* eh_bus_reset_handler)(struct scsi_cmnd *); +int (* eh_host_reset_handler)(struct scsi_cmnd *); + + Higher-severity actions are taken only when lower-severity actions +cannot recover some of failed scmds. Also, note that failure of the +highest-severity action means EH failure and results in offlining of +all unrecovered devices. + + During recovery, the following rules are followed + + - Recovery actions are performed on failed scmds on the to do list, + eh_work_q. If a recovery action succeeds for a scmd, recovered + scmds are removed from eh_work_q. + + Note that single recovery action on a scmd can recover multiple + scmds. e.g. resetting a device recovers all failed scmds on the + device. + + - Higher severity actions are taken iff eh_work_q is not empty after + lower severity actions are complete. + + - EH reuses failed scmds to issue commands for recovery. For + timed-out scmds, SCSI EH ensures that LLDD forgets about a scmd + before reusing it for EH commands. + + When a scmd is recovered, the scmd is moved from eh_work_q to EH +local eh_done_q using scsi_eh_finish_cmd(). After all scmds are +recovered (eh_work_q is empty), scsi_eh_flush_done_q() is invoked to +either retry or error-finish (notify upper layer of failure) recovered +scmds. + + scmds are retried iff its sdev is still online (not offlined during +EH), REQ_FAILFAST is not set and ++scmd->retries is less than +scmd->allowed. + + +[2-1-2] Flow of scmds through EH + + 1. Error completion / time out + ACTION: scsi_eh_scmd_add() is invoked for scmd + - set scmd->eh_eflags + - add scmd to shost->eh_cmd_q + - set SHOST_RECOVERY + - shost->host_failed++ + LOCKING: shost->host_lock + + 2. EH starts + ACTION: move all scmds to EH's local eh_work_q. shost->eh_cmd_q + is cleared. + LOCKING: shost->host_lock (not strictly necessary, just for + consistency) + + 3. scmd recovered + ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd + - shost->host_failed-- + - clear scmd->eh_eflags + - scsi_setup_cmd_retry() + - move from local eh_work_q to local eh_done_q + LOCKING: none + + 4. EH completes + ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper + layer of failure. + - scmd is removed from eh_done_q and scmd->eh_entry is cleared + - if retry is necessary, scmd is requeued using + scsi_queue_insert() + - otherwise, scsi_finish_command() is invoked for scmd + LOCKING: queue or finish function performs appropriate locking + + +[2-1-3] Flow of control + + EH through fine-grained callbacks start from scsi_unjam_host(). + +<> + + 1. Lock shost->host_lock, splice_init shost->eh_cmd_q into local + eh_work_q and unlock host_lock. Note that shost->eh_cmd_q is + cleared by this action. + + 2. Invoke scsi_eh_get_sense. + + <> + + This action is taken for each error-completed + (!SCSI_EH_CANCEL_CMD) commands without valid sense data. Most + SCSI transports/LLDDs automatically acquire sense data on + command failures (autosense). Autosense is recommended for + performance reasons and as sense information could get out of + sync inbetween occurrence of CHECK CONDITION and this action. + + Note that if autosense is not supported, scmd->sense_buffer + contains invalid sense data when error-completing the scmd + with scsi_done(). scsi_decide_disposition() always returns + FAILED in such cases thus invoking SCSI EH. When the scmd + reaches here, sense data is acquired and + scsi_decide_disposition() is called again. + + 1. Invoke scsi_request_sense() which issues REQUEST_SENSE + command. If fails, no action. Note that taking no action + causes higher-severity recovery to be taken for the scmd. + + 2. Invoke scsi_decide_disposition() on the scmd + + - SUCCESS + scmd->retries is set to scmd->allowed preventing + scsi_eh_flush_done_q() from retrying the scmd and + scsi_eh_finish_cmd() is invoked. + + - NEEDS_RETRY + scsi_eh_finish_cmd() invoked + + - otherwise + No action. + + 3. If !list_empty(&eh_work_q), invoke scsi_eh_abort_cmds(). + + <> + + This action is taken for each timed out command. + hostt->eh_abort_handler() is invoked for each scmd. The + handler returns SUCCESS if it has succeeded to make LLDD and + all related hardware forget about the scmd. + + If a timedout scmd is successfully aborted and the sdev is + either offline or ready, scsi_eh_finish_cmd() is invoked for + the scmd. Otherwise, the scmd is left in eh_work_q for + higher-severity actions. + + Note that both offline and ready status mean that the sdev is + ready to process new scmds, where processing also implies + immediate failing; thus, if a sdev is in one of the two + states, no further recovery action is needed. + + Device readiness is tested using scsi_eh_tur() which issues + TEST_UNIT_READY command. Note that the scmd must have been + aborted successfully before reusing it for TEST_UNIT_READY. + + 4. If !list_empty(&eh_work_q), invoke scsi_eh_ready_devs() + + <> + + This function takes four increasingly more severe measures to + make failed sdevs ready for new commands. + + 1. Invoke scsi_eh_stu() + + <> + + For each sdev which has failed scmds with valid sense data + of which scsi_check_sense()'s verdict is FAILED, + START_STOP_UNIT command is issued w/ start=1. Note that + as we explicitly choose error-completed scmds, it is known + that lower layers have forgotten about the scmd and we can + reuse it for STU. + + If STU succeeds and the sdev is either offline or ready, + all failed scmds on the sdev are EH-finished with + scsi_eh_finish_cmd(). + + *NOTE* If hostt->eh_abort_handler() isn't implemented or + failed, we may still have timed out scmds at this point + and STU doesn't make lower layers forget about those + scmds. Yet, this function EH-finish all scmds on the sdev + if STU succeeds leaving lower layers in an inconsistent + state. It seems that STU action should be taken only when + a sdev has no timed out scmd. + + 2. If !list_empty(&eh_work_q), invoke scsi_eh_bus_device_reset(). + + <> + + This action is very similar to scsi_eh_stu() except that, + instead of issuing STU, hostt->eh_device_reset_handler() + is used. Also, as we're not issuing SCSI commands and + resetting clears all scmds on the sdev, there is no need + to choose error-completed scmds. + + 3. If !list_empty(&eh_work_q), invoke scsi_eh_bus_reset() + + <> + + hostt->eh_bus_reset_handler() is invoked for each channel + with failed scmds. If bus reset succeeds, all failed + scmds on all ready or offline sdevs on the channel are + EH-finished. + + 4. If !list_empty(&eh_work_q), invoke scsi_eh_host_reset() + + <> + + This is the last resort. hostt->eh_host_reset_handler() + is invoked. If host reset succeeds, all failed scmds on + all ready or offline sdevs on the host are EH-finished. + + 5. If !list_empty(&eh_work_q), invoke scsi_eh_offline_sdevs() + + <> + + Take all sdevs which still have unrecovered scmds offline + and EH-finish the scmds. + + 5. Invoke scsi_eh_flush_done_q(). + + <> + + At this point all scmds are recovered (or given up) and + put on eh_done_q by scsi_eh_finish_cmd(). This function + flushes eh_done_q by either retrying or notifying upper + layer of failure of the scmds. + + +[2-2] EH through hostt->eh_strategy_handler() + + hostt->eh_strategy_handler() is invoked in the place of +scsi_unjam_host() and it is responsible for whole recovery process. +On completion, the handler should have made lower layers forget about +all failed scmds and either ready for new commands or offline. Also, +it should perform SCSI EH maintenance choirs to maintain integrity of +SCSI midlayer. IOW, of the steps described in [2-1-2], all steps +except for #1 must be implemented by eh_strategy_handler(). + + +[2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions + + The following conditions are true on entry to the handler. + + - Each failed scmd's eh_flags field is set appropriately. + + - Each failed scmd is linked on scmd->eh_cmd_q by scmd->eh_entry. + + - SHOST_RECOVERY is set. + + - shost->host_failed == shost->host_busy + + +[2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions + + The following conditions must be true on exit from the handler. + + - shost->host_failed is zero. + + - Each scmd's eh_eflags field is cleared. + + - Each scmd is in such a state that scsi_setup_cmd_retry() on the + scmd doesn't make any difference. + + - shost->eh_cmd_q is cleared. + + - Each scmd->eh_entry is cleared. + + - Either scsi_queue_insert() or scsi_finish_command() is called on + each scmd. Note that the handler is free to use scmd->retries and + ->allowed to limit the number of retries. + + +[2-2-3] Things to consider + + - Know that timed out scmds are still active on lower layers. Make + lower layers forget about them before doing anything else with + those scmds. + + - For consistency, when accessing/modifying shost data structure, + grab shost->host_lock. + + - On completion, each failed sdev must have forgotten about all + active scmds. + + - On completion, each failed sdev must be ready for new commands or + offline. + + +-- +Tejun Heo +htejun@gmail.com +11th September 2005 diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt index ebfcdf28485f..13cba955cb5a 100644 --- a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt @@ -75,7 +75,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. adsp_map - PCM device number maps assigned to the 2st OSS device. - Default: 1 nonblock_open - - Don't block opening busy PCM devices. + - Don't block opening busy PCM devices. Default: 1 For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of the card #0. Similarly, when adsp_map=0, /dev/adsp will be mapped @@ -148,6 +148,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports up to 8 cards. This module does not support autoprobe thus main port must be specified!!! Other ports are optional. + Module snd-ad1889 + ----------------- + + Module for Analog Devices AD1889 chips. + + ac97_quirk - AC'97 workaround for strange hardware + See the description of intel8x0 module for details. + + This module supports up to 8 cards. + Module snd-ali5451 ------------------ @@ -189,15 +199,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-atiixp ----------------- - Module for ATI IXP 150/200/250 AC97 controllers. + Module for ATI IXP 150/200/250/400 AC97 controllers. - ac97_clock - AC'97 clock (defalut = 48000) + ac97_clock - AC'97 clock (default = 48000) ac97_quirk - AC'97 workaround for strange hardware - See the description of intel8x0 module for details. + See "AC97 Quirk Option" section below. spdif_aclink - S/PDIF transfer over AC-link (default = 1) This module supports up to 8 cards and autoprobe. + ATI IXP has two different methods to control SPDIF output. One is + over AC-link and another is over the "direct" SPDIF output. The + implementation depends on the motherboard, and you'll need to + choose the correct one via spdif_aclink module option. + Module snd-atiixp-modem ----------------------- @@ -230,7 +245,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The hardware EQ hardware and SPDIF is only present in the Vortex2 and Advantage. - Note: Some ALSA mixer applicactions don't handle the SPDIF samplerate + Note: Some ALSA mixer applications don't handle the SPDIF sample rate control correctly. If you have problems regarding this, try another ALSA compliant mixer (alsamixer works). @@ -302,7 +317,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mpu_port - 0x300,0x310,0x320,0x330, 0 = disable (default) fm_port - 0x388 (default), 0 = disable (default) - soft_ac3 - Sofware-conversion of raw SPDIF packets (model 033 only) + soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only) (default = 1) joystick_port - Joystick port address (0 = disable, 1 = auto-detect) @@ -384,7 +399,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/ CS4624/CS4630/CS4280 PCI chips. - external_amp - Force to enable external amplifer. + external_amp - Force to enable external amplifier. thinkpad - Force to enable Thinkpad's CLKRUN control. mmap_valid - Support OSS mmap mode (default = 0). @@ -620,7 +635,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. VIA VT8251/VT8237A model - force the model name - position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF) + position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) Module supports up to 8 cards. @@ -656,6 +671,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. allout 5-jack in back, 2-jack in front, SPDIF out auto auto-config reading BIOS (default) + If the default configuration doesn't work and one of the above + matches with your device, report it together with the PCI + subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel + ML (see the section "Links and Addresses"). + Note 2: If you get click noises on output, try the module option position_fix=1 or 2. position_fix=1 will use the SD_LPIB register value without FIFO size correction as the current @@ -783,20 +803,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ac97_clock - AC'97 codec clock base (0 = auto-detect) ac97_quirk - AC'97 workaround for strange hardware - The following strings are accepted: - default = don't override the default setting - disable = disable the quirk - hp_only = use headphone control as master - swap_hp = swap headphone and master controls - swap_surround = swap master and surround controls - ad_sharing = for AD1985, turn on OMS bit and use headphone - alc_jack = for ALC65x, turn on the jack sense mode - inv_eapd = inverted EAPD implementation - mute_led = bind EAPD bit for turning on/off mute LED - For backward compatibility, the corresponding integer - value -1, 0, ... are accepted, too. + See "AC97 Quirk Option" section below. buggy_irq - Enable workaround for buggy interrupts on some - motherboards (default off) + motherboards (default yes on nForce chips, + otherwise off) + buggy_semaphore - Enable workaround for hardwares with buggy + semaphores (e.g. on some ASUS laptops) + (default off) Module supports autoprobe and multiple bus-master chips (max 8). @@ -808,13 +821,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. motherboard has these devices, use the ns558 or snd-mpu401 modules, respectively. - The ac97_quirk option is used to enable/override the workaround - for specific devices. Some hardware have swapped output pins - between Master and Headphone, or Surround. The driver provides - the auto-detection of known problematic devices, but some might - be unknown or wrongly detected. In such a case, pass the proper - value with this option. - The power-management is supported. Module snd-intel8x0m @@ -966,7 +972,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. with machines with other (most likely CS423x or OPL3SAx) chips, even though the device is detected in lspci. In such a case, try other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP - but some doesn't have ISA PnP. You'll need to speicfy isapnp=0 + but some doesn't have ISA PnP. You'll need to specify isapnp=0 and proper hardware parameters in the case without ISA PnP. Note: some laptops need a workaround for AC97 RESET. For the @@ -1302,7 +1308,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. channels [VIA8233/C, 8235, 8237 only] ac97_quirk - AC'97 workaround for strange hardware - See the description of intel8x0 module for details. + See "AC97 Quirk Option" section below. Module supports autoprobe and multiple bus-master chips (max 8). @@ -1327,16 +1333,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "lspci -nv"). If dxs_support=5 does not work, try dxs_support=4; if it doesn't work too, try dxs_support=1. (dxs_support=1 is - usually for old motherboards. The correct implementated + usually for old motherboards. The correct implemented board should work with 4 or 5.) If it still doesn't work and the default setting is ok, dxs_support=3 is the right choice. If the default setting doesn't work at all, try dxs_support=2 to disable the DXS channels. In any cases, please let us know the result and the - subsystem vendor/device ids. + subsystem vendor/device ids. See "Links and Addresses" + below. Note: for the MPU401 on VIA823x, use snd-mpu401 driver - additonally. The mpu_port option is for VIA686 chips only. + additionally. The mpu_port option is for VIA686 chips only. Module snd-via82xx-modem ------------------------ @@ -1398,8 +1405,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports up to 8 cards. The module is compiled only when PCMCIA is supported on kernel. - To activate the driver via the card manager, you'll need to set - up /etc/pcmcia/vxpocket.conf. See the sound/pcmcia/vx/vxpocket.c. + With the older 2.6.x kernel, to activate the driver via the card + manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the + sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no + longer require a config file. When the driver is compiled as a module and the hotplug firmware is supported, the firmware data is loaded via hotplug automatically. @@ -1411,6 +1420,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Note: the driver is build only when CONFIG_ISA is set. + Note2: snd-vxp440 driver is merged to snd-vxpocket driver since + ALSA 1.0.10. + Module snd-ymfpci ----------------- @@ -1436,6 +1448,37 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Note: the driver is build only when CONFIG_ISA is set. +AC97 Quirk Option +================= + +The ac97_quirk option is used to enable/override the workaround for +specific devices on drivers for on-board AC'97 controllers like +snd-intel8x0. Some hardware have swapped output pins between Master +and Headphone, or Surround (thanks to confusion of AC'97 +specifications from version to version :-) + +The driver provides the auto-detection of known problematic devices, +but some might be unknown or wrongly detected. In such a case, pass +the proper value with this option. + +The following strings are accepted: + - default Don't override the default setting + - disable Disable the quirk + - hp_only Bind Master and Headphone controls as a single control + - swap_hp Swap headphone and master controls + - swap_surround Swap master and surround controls + - ad_sharing For AD1985, turn on OMS bit and use headphone + - alc_jack For ALC65x, turn on the jack sense mode + - inv_eapd Inverted EAPD implementation + - mute_led Bind EAPD bit for turning on/off mute LED + +For backward compatibility, the corresponding integer value -1, 0, +... are accepted, too. + +For example, if "Master" volume control has no effect on your device +but only "Headphone" does, pass ac97_quirk=hp_only module option. + + Configuring Non-ISAPNP Cards ============================ @@ -1553,6 +1596,8 @@ Proc interfaces (/proc/asound) - whole-frag write only whole fragments (optimization affecting playback only) - no-silence do not fill silence ahead to avoid clicks + - buggy-ptr Returns the whitespace blocks in GETOPTR ioctl + instead of filled blocks Example: echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss @@ -1589,9 +1634,14 @@ commands to the snd-page-alloc driver: use. -Links -===== +Links and Addresses +=================== ALSA project homepage http://www.alsa-project.org + ALSA Bug Tracking System + https://bugtrack.alsa-project.org/bugs/ + + ALSA Developers ML + mailto:alsa-devel@lists.sourceforge.net diff --git a/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 0475478c2484..24e85520890b 100644 --- a/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -447,7 +447,7 @@ .... /* allocate a chip-specific data with zero filled */ - chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (chip == NULL) return -ENOMEM; @@ -949,7 +949,7 @@ After allocating a card instance via snd_card_new() (with NULL on the 4th arg), call - kcalloc(). + kzalloc(). @@ -958,7 +958,7 @@ mychip_t *chip; card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL); ..... - chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); ]]> @@ -1136,7 +1136,7 @@ return -ENXIO; } - chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (chip == NULL) { pci_disable_device(pci); return -ENOMEM; @@ -1292,7 +1292,7 @@ need to initialize this number as -1 before actual allocation, since irq 0 is valid. The port address and its resource pointer can be initialized as null by - kcalloc() automatically, so you + kzalloc() automatically, so you don't have to take care of resetting them. diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index a67bf7d315d7..d1e0eb46d201 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -370,7 +370,10 @@ W: http://atmelwlandriver.sourceforge.net/ S: Maintained AUDIT SUBSYSTEM -L: linux-audit@redhat.com (subscribers-only) +P: David Woodhouse +M: dwmw2@infradead.org +L: linux-audit@redhat.com +W: http://people.redhat.com/sgrubb/audit/ S: Maintained AX.25 NETWORK LAYER diff --git a/trunk/Makefile b/trunk/Makefile index 45e5a38fbc7a..4e0d7c68d223 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 13 -EXTRAVERSION = +SUBLEVEL = 14 +EXTRAVERSION =-rc1 NAME=Affluent Albatross # *DOCUMENTATION* diff --git a/trunk/arch/arm/mach-pxa/Kconfig b/trunk/arch/arm/mach-pxa/Kconfig index 405a55f2287c..3e5f69bb5ac4 100644 --- a/trunk/arch/arm/mach-pxa/Kconfig +++ b/trunk/arch/arm/mach-pxa/Kconfig @@ -20,40 +20,66 @@ config ARCH_PXA_IDP select PXA25x config PXA_SHARPSL - bool "SHARP SL-5600 and SL-C7xx Models" - select PXA25x + bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP select SHARP_PARAM help Say Y here if you intend to run this kernel on a - Sharp SL-5600 (Poodle), Sharp SL-C700 (Corgi), - SL-C750 (Shepherd) or a Sharp SL-C760 (Husky) - handheld computer. + Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), + SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), + SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. endchoice +if PXA_SHARPSL + +choice + prompt "Select target Sharp Zaurus device range" + +config PXA_SHARPSL_25x + bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + select PXA25x + +config PXA_SHARPSL_27x + bool "Sharp PXA270 models (SL-Cxx00)" + select PXA27x + +endchoice + +endif + endmenu config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select SHARP_LOCOMO config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + config PXA25x bool help @@ -74,4 +100,9 @@ config PXA_SHARP_C7xx help Enable support for all Sharp C7xx models +config PXA_SHARP_Cxx00 + bool + help + Enable common support for Sharp Cxx00 models + endif diff --git a/trunk/arch/arm/mach-pxa/Makefile b/trunk/arch/arm/mach-pxa/Makefile index 33dae99ec2d8..f609a0f232cb 100644 --- a/trunk/arch/arm/mach-pxa/Makefile +++ b/trunk/arch/arm/mach-pxa/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o # Support for blinky lights diff --git a/trunk/arch/arm/mach-pxa/corgi.c b/trunk/arch/arm/mach-pxa/corgi.c index 07b5dd453565..426c2bc517eb 100644 --- a/trunk/arch/arm/mach-pxa/corgi.c +++ b/trunk/arch/arm/mach-pxa/corgi.c @@ -41,6 +41,7 @@ #include #include "generic.h" +#include "sharpsl.h" /* @@ -94,14 +95,30 @@ struct platform_device corgissp_device = { .id = -1, }; +struct corgissp_machinfo corgi_ssp_machinfo = { + .port = 1, + .cs_lcdcon = CORGI_GPIO_LCDCON_CS, + .cs_ads7846 = CORGI_GPIO_ADS7846_CS, + .cs_max1111 = CORGI_GPIO_MAX1111_CS, + .clk_lcdcon = 76, + .clk_ads7846 = 2, + .clk_max1111 = 8, +}; + /* * Corgi Backlight Device */ +static struct corgibl_machinfo corgi_bl_machinfo = { + .max_intensity = 0x2f, + .set_bl_intensity = corgi_bl_set_intensity, +}; + static struct platform_device corgibl_device = { .name = "corgi-bl", .dev = { .parent = &corgifb_device.dev, + .platform_data = &corgi_bl_machinfo, }, .id = -1, }; @@ -119,12 +136,29 @@ static struct platform_device corgikbd_device = { /* * Corgi Touch Screen Device */ +static struct resource corgits_resources[] = { + [0] = { + .start = CORGI_IRQ_GPIO_TP_INT, + .end = CORGI_IRQ_GPIO_TP_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct corgits_machinfo corgi_ts_machinfo = { + .get_hsync_len = corgi_get_hsync_len, + .put_hsync = corgi_put_hsync, + .wait_hsync = corgi_wait_hsync, +}; + static struct platform_device corgits_device = { .name = "corgi-ts", .dev = { .parent = &corgissp_device.dev, + .platform_data = &corgi_ts_machinfo, }, .id = -1, + .num_resources = ARRAY_SIZE(corgits_resources), + .resource = corgits_resources, }; @@ -225,7 +259,10 @@ static struct platform_device *devices[] __initdata = { static void __init corgi_init(void) { + corgi_ssp_set_machinfo(&corgi_ssp_machinfo); + pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); diff --git a/trunk/arch/arm/mach-pxa/corgi_lcd.c b/trunk/arch/arm/mach-pxa/corgi_lcd.c index deac29c00290..c5efcd04fcbc 100644 --- a/trunk/arch/arm/mach-pxa/corgi_lcd.c +++ b/trunk/arch/arm/mach-pxa/corgi_lcd.c @@ -1,10 +1,14 @@ /* * linux/drivers/video/w100fb.c * - * Corgi LCD Specific Code for ATI Imageon w100 (Wallaby) + * Corgi/Spitz LCD Specific Code * * Copyright (C) 2005 Richard Purdie * + * Connectivity: + * Corgi - LCD to ATI Imageon w100 (Wallaby) + * Spitz - LCD to PXA Framebuffer + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -14,9 +18,17 @@ #include #include #include +#include +#include +#include #include +#include +#include +#include +#include +#include #include -#include