From 7e645464a084c4c73242b7d586112b7998bddaf1 Mon Sep 17 00:00:00 2001
From: Darron Broad <darron@kewl.org>
Date: Thu, 18 Dec 2008 06:28:35 -0300
Subject: [PATCH] --- yaml --- r: 124422 b: refs/heads/master c:
 793927372626bae48b32db24dddde40d73923a9c h: refs/heads/master v: v3

---
 [refs]                                        |  2 +-
 .../drivers/media/video/cx88/cx88-blackbird.c | 12 ++++-
 trunk/drivers/media/video/cx88/cx88-dvb.c     | 48 ++++++++++---------
 3 files changed, 37 insertions(+), 25 deletions(-)

diff --git a/[refs] b/[refs]
index 9d8015f3678b..ae373b0f338d 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6639f1e060c2d2f3331ba6bcefe8f65b623365f3
+refs/heads/master: 793927372626bae48b32db24dddde40d73923a9c
diff --git a/trunk/drivers/media/video/cx88/cx88-blackbird.c b/trunk/drivers/media/video/cx88/cx88-blackbird.c
index ca067ec250af..e162a70748c5 100644
--- a/trunk/drivers/media/video/cx88/cx88-blackbird.c
+++ b/trunk/drivers/media/video/cx88/cx88-blackbird.c
@@ -1244,8 +1244,16 @@ static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv)
 		 * We're being given access to re-arrange the GPIOs.
 		 * Take the bus off the cx22702 and put the cx23416 on it.
 		 */
-		cx_clear(MO_GP0_IO, 0x00000080); /* cx22702 in reset */
-		cx_set(MO_GP0_IO,   0x00000004); /* Disable the cx22702 */
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		/* tri-state the cx22702 pins */
+		cx_set(MO_GP0_IO, 0x00000004);
+		udelay(1000);
 		break;
 	default:
 		err = -ENODEV;
diff --git a/trunk/drivers/media/video/cx88/cx88-dvb.c b/trunk/drivers/media/video/cx88/cx88-dvb.c
index e5bbc7b37c39..da4dd4913d9f 100644
--- a/trunk/drivers/media/video/cx88/cx88-dvb.c
+++ b/trunk/drivers/media/video/cx88/cx88-dvb.c
@@ -1128,40 +1128,44 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
 		 * on the bus. Take the bus from the cx23416 and enable the
 		 * cx22702 demod
 		 */
-		cx_set(MO_GP0_IO,   0x00000080); /* cx22702 out of reset and enable */
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		/* enable the cx22702 pins */
 		cx_clear(MO_GP0_IO, 0x00000004);
 		udelay(1000);
 		break;
 
 	case CX88_BOARD_HAUPPAUGE_HVR3000:
 	case CX88_BOARD_HAUPPAUGE_HVR4000:
-		if(core->dvbdev->frontends.active_fe_id == 1) {
-			/* DVB-S/S2 Enabled */
-
-			/* Toggle reset on cx22702 leaving i2c active */
-			cx_write(MO_GP0_IO, (core->board.input[0].gpio0 & 0x0000ff00) | 0x00000080);
-			udelay(1000);
-			cx_clear(MO_GP0_IO, 0x00000080);
-			udelay(50);
-			cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */
-			cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */
-			udelay(1000);
-
-			cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		switch (core->dvbdev->frontends.active_fe_id) {
+		case 1: /* DVB-S/S2 Enabled */
+			/* tri-state the cx22702 pins */
+			cx_set(MO_GP0_IO, 0x00000004);
+			/* Take the cx24116/cx24123 out of reset */
+			cx_write(MO_SRST_IO, 1);
 			core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
-		} else
-		if (core->dvbdev->frontends.active_fe_id == 2) {
-			/* DVB-T Enabled */
-
+			break;
+		case 2: /* DVB-T Enabled */
 			/* Put the cx24116/cx24123 into reset */
 			cx_write(MO_SRST_IO, 0);
-
-			/* cx22702 out of reset and enable it */
-			cx_set(MO_GP0_IO,   0x00000080);
+			/* enable the cx22702 pins */
 			cx_clear(MO_GP0_IO, 0x00000004);
 			core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
-			udelay(1000);
+			break;
 		}
+		udelay(1000);
 		break;
 
 	default: