diff --git a/[refs] b/[refs]
index 4414dd24d506..4d8a977f8175 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ae377aaf98630de03e58fffdf3f35dec3d0ca5e0
+refs/heads/master: c31cc1b764b6efb713601d351c1a879c042eab34
diff --git a/trunk/arch/arm/boot/dts/am33xx.dtsi b/trunk/arch/arm/boot/dts/am33xx.dtsi
index bd0cff3f808c..59509c48d7e5 100644
--- a/trunk/arch/arm/boot/dts/am33xx.dtsi
+++ b/trunk/arch/arm/boot/dts/am33xx.dtsi
@@ -154,10 +154,5 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
-
-		wdt2: wdt@44e35000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer2";
-		};
 	};
 };
diff --git a/trunk/arch/arm/boot/dts/twl6030.dtsi b/trunk/arch/arm/boot/dts/twl6030.dtsi
index d351b27d7213..3b2f3510d7eb 100644
--- a/trunk/arch/arm/boot/dts/twl6030.dtsi
+++ b/trunk/arch/arm/boot/dts/twl6030.dtsi
@@ -66,7 +66,6 @@
 
 	vcxio: regulator@8 {
 		compatible = "ti,twl6030-vcxio";
-		regulator-always-on;
 	};
 
 	vusb: regulator@9 {
@@ -75,12 +74,10 @@
 
 	v1v8: regulator@10 {
 		compatible = "ti,twl6030-v1v8";
-		regulator-always-on;
 	};
 
 	v2v1: regulator@11 {
 		compatible = "ti,twl6030-v2v1";
-		regulator-always-on;
 	};
 
 	clk32kg: regulator@12 {
diff --git a/trunk/arch/arm/mach-omap2/Kconfig b/trunk/arch/arm/mach-omap2/Kconfig
index 4a4d058ed146..dd2db025f778 100644
--- a/trunk/arch/arm/mach-omap2/Kconfig
+++ b/trunk/arch/arm/mach-omap2/Kconfig
@@ -69,7 +69,6 @@ config SOC_OMAP5
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
-	select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
diff --git a/trunk/arch/arm/mach-omap2/board-igep0020.c b/trunk/arch/arm/mach-omap2/board-igep0020.c
index 28214483aaba..74915295482e 100644
--- a/trunk/arch/arm/mach-omap2/board-igep0020.c
+++ b/trunk/arch/arm/mach-omap2/board-igep0020.c
@@ -554,8 +554,6 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
-	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
-	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
diff --git a/trunk/arch/arm/mach-omap2/board-omap3evm.c b/trunk/arch/arm/mach-omap2/board-omap3evm.c
index ef230a0eb5eb..0d362e9f9cb9 100644
--- a/trunk/arch/arm/mach-omap2/board-omap3evm.c
+++ b/trunk/arch/arm/mach-omap2/board-omap3evm.c
@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
diff --git a/trunk/arch/arm/mach-omap2/common-board-devices.c b/trunk/arch/arm/mach-omap2/common-board-devices.c
index 14734746457c..c1875862679f 100644
--- a/trunk/arch/arm/mach-omap2/common-board-devices.c
+++ b/trunk/arch/arm/mach-omap2/common-board-devices.c
@@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
-	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/trunk/arch/arm/mach-omap2/common-board-devices.h b/trunk/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a6166b..a0b4a42836ab 100644
--- a/trunk/arch/arm/mach-omap2/common-board-devices.h
+++ b/trunk/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;