+
+
+ Here as a first value the channel-index is taken to get/set the
+ corresponding mixer channel, where 0-63 are the input to output
+ fader and 64-127 the playback to outputs fader. Value 0
+ is channel muted 0 and 32768 an amplification of 1.
+
+ Chn 1-64
+
+ fast mixer for the ALSA-mixer utils. The diagonal of the
+ mixer-matrix is implemented from playback to output.
+
+
+ Line Out
+
+ Name -- "Line Out"
+
+ Access -- Read Write
+
+ Values -- 0 1
+
+ Switching on and off the analog out, which has nothing to do
+ with mixing or routing. the analog outs reflects channel 63,64.
+
+
+--- information (only read access):
+
+ Sample Rate
+
+ Name -- "System Sample Rate"
+
+ Access -- Read-only
+
+ getting the sample rate.
+
+
+ External Rate measured
+
+ Name -- "External Rate"
+
+ Access -- Read only
+
+
+ Should be "Autosync Rate", but Name used is
+ ALSA-Scheme. External Sample frequency liked used on Autosync is
+ reported.
+
+
+ MADI Sync Status
+
+ Name -- "MADI Sync Lock Status"
+
+ Access -- Read
+
+ Values -- 0,1,2
+
+ MADI-Input is 0=Unlocked, 1=Locked, or 2=Synced.
+
+
+ Word Clock Sync Status
+
+ Name -- "Word Clock Lock Status"
+
+ Access -- Read
+
+ Values -- 0,1,2
+
+ Word Clock Input is 0=Unlocked, 1=Locked, or 2=Synced.
+
+ AutoSync
+
+ Name -- "AutoSync Reference"
+
+ Access -- Read
+
+ Values -- "WordClock", "MADI", "None"
+
+ Sync-Reference is either "WordClock", "MADI" or none.
+
+ RX 64ch --- noch nicht implementiert
+
+ MADI-Receiver is in 64 channel mode oder 56 channel mode.
+
+
+ AB_inp --- not tested
+
+ Used input for Auto-Input.
+
+
+ actual Buffer Position --- not implemented
+
+ !!! this is a ALSA internal function, so no control is used !!!
+
+
+
+Calling Parameter:
+
+ index int array (min = 1, max = 8),
+ "Index value for RME HDSPM interface." card-index within ALSA
+
+ note: ALSA-standard
+
+ id string array (min = 1, max = 8),
+ "ID string for RME HDSPM interface."
+
+ note: ALSA-standard
+
+ enable int array (min = 1, max = 8),
+ "Enable/disable specific HDSPM sound-cards."
+
+ note: ALSA-standard
+
+ precise_ptr int array (min = 1, max = 8),
+ "Enable precise pointer, or disable."
+
+ note: Use only when the application supports this (which is a special case).
+
+ line_outs_monitor int array (min = 1, max = 8),
+ "Send playback streams to analog outs by default."
+
+
+ note: each playback channel is mixed to the same numbered output
+ channel (routed). This is against the ALSA-convention, where all
+ channels have to be muted on after loading the driver, but was
+ used before on other cards, so i historically use it again)
+
+
+
+ enable_monitor int array (min = 1, max = 8),
+ "Enable Analog Out on Channel 63/64 by default."
+
+ note: here the analog output is enabled (but not routed).
\ No newline at end of file
diff --git a/trunk/Documentation/stable_api_nonsense.txt b/trunk/Documentation/stable_api_nonsense.txt
index 3cea13875277..f39c9d714db3 100644
--- a/trunk/Documentation/stable_api_nonsense.txt
+++ b/trunk/Documentation/stable_api_nonsense.txt
@@ -132,7 +132,7 @@ to extra work for the USB developers. Since all Linux USB developers do
their work on their own time, asking programmers to do extra work for no
gain, for free, is not a possibility.
-Security issues are also a very important for Linux. When a
+Security issues are also very important for Linux. When a
security issue is found, it is fixed in a very short amount of time. A
number of times this has caused internal kernel interfaces to be
reworked to prevent the security problem from occurring. When this
diff --git a/trunk/Documentation/stable_kernel_rules.txt b/trunk/Documentation/stable_kernel_rules.txt
new file mode 100644
index 000000000000..2c81305090df
--- /dev/null
+++ b/trunk/Documentation/stable_kernel_rules.txt
@@ -0,0 +1,58 @@
+Everything you ever wanted to know about Linux 2.6 -stable releases.
+
+Rules on what kind of patches are accepted, and what ones are not, into
+the "-stable" tree:
+
+ - It must be obviously correct and tested.
+ - It can not bigger than 100 lines, with context.
+ - It must fix only one thing.
+ - It must fix a real bug that bothers people (not a, "This could be a
+ problem..." type thing.)
+ - It must fix a problem that causes a build error (but not for things
+ marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
+ security issue, or some "oh, that's not good" issue. In short,
+ something critical.
+ - No "theoretical race condition" issues, unless an explanation of how
+ the race can be exploited.
+ - It can not contain any "trivial" fixes in it (spelling changes,
+ whitespace cleanups, etc.)
+ - It must be accepted by the relevant subsystem maintainer.
+ - It must follow Documentation/SubmittingPatches rules.
+
+
+Procedure for submitting patches to the -stable tree:
+
+ - Send the patch, after verifying that it follows the above rules, to
+ stable@kernel.org.
+ - The sender will receive an ack when the patch has been accepted into
+ the queue, or a nak if the patch is rejected. This response might
+ take a few days, according to the developer's schedules.
+ - If accepted, the patch will be added to the -stable queue, for review
+ by other developers.
+ - Security patches should not be sent to this alias, but instead to the
+ documented security@kernel.org.
+
+
+Review cycle:
+
+ - When the -stable maintainers decide for a review cycle, the patches
+ will be sent to the review committee, and the maintainer of the
+ affected area of the patch (unless the submitter is the maintainer of
+ the area) and CC: to the linux-kernel mailing list.
+ - The review committee has 48 hours in which to ack or nak the patch.
+ - If the patch is rejected by a member of the committee, or linux-kernel
+ members object to the patch, bringing up issues that the maintainers
+ and members did not realize, the patch will be dropped from the
+ queue.
+ - At the end of the review cycle, the acked patches will be added to
+ the latest -stable release, and a new -stable release will happen.
+ - Security patches will be accepted into the -stable tree directly from
+ the security kernel team, and not go through the normal review cycle.
+ Contact the kernel security team for more details on this procedure.
+
+
+Review committe:
+
+ - This will be made up of a number of kernel developers who have
+ volunteered for this task, and a few that haven't.
+
diff --git a/trunk/Documentation/sysctl/kernel.txt b/trunk/Documentation/sysctl/kernel.txt
index 35159176997b..9f11d36a8c10 100644
--- a/trunk/Documentation/sysctl/kernel.txt
+++ b/trunk/Documentation/sysctl/kernel.txt
@@ -49,6 +49,7 @@ show up in /proc/sys/kernel:
- shmmax [ sysv ipc ]
- shmmni
- stop-a [ SPARC only ]
+- suid_dumpable
- sysrq ==> Documentation/sysrq.txt
- tainted
- threads-max
@@ -300,6 +301,25 @@ kernel. This value defaults to SHMMAX.
==============================================================
+suid_dumpable:
+
+This value can be used to query and set the core dump mode for setuid
+or otherwise protected/tainted binaries. The modes are
+
+0 - (default) - traditional behaviour. Any process which has changed
+ privilege levels or is execute only will not be dumped
+1 - (debug) - all processes dump core when possible. The core dump is
+ owned by the current user and no security is applied. This is
+ intended for system debugging situations only. Ptrace is unchecked.
+2 - (suidsafe) - any binary which normally would not be dumped is dumped
+ readable by root only. This allows the end user to remove
+ such a dump but not access it directly. For security reasons
+ core dumps in this mode will not overwrite one another or
+ other files. This mode is appropriate when adminstrators are
+ attempting to debug problems in a normal environment.
+
+==============================================================
+
tainted:
Non-zero if the kernel has been tainted. Numeric values, which
diff --git a/trunk/Documentation/sysrq.txt b/trunk/Documentation/sysrq.txt
index f98c2e31c143..136d817c01ba 100644
--- a/trunk/Documentation/sysrq.txt
+++ b/trunk/Documentation/sysrq.txt
@@ -72,6 +72,8 @@ On all - write a character to /proc/sysrq-trigger. eg:
'b' - Will immediately reboot the system without syncing or unmounting
your disks.
+'c' - Will perform a kexec reboot in order to take a crashdump.
+
'o' - Will shut your system off (if configured and supported).
's' - Will attempt to sync all mounted filesystems.
@@ -122,6 +124,9 @@ useful when you want to exit a program that will not let you switch consoles.
re'B'oot is good when you're unable to shut down. But you should also 'S'ync
and 'U'mount first.
+'C'rashdump can be used to manually trigger a crashdump when the system is hung.
+The kernel needs to have been built with CONFIG_KEXEC enabled.
+
'S'ync is great when your system is locked up, it allows you to sync your
disks and will certainly lessen the chance of data loss and fscking. Note
that the sync hasn't taken place until you see the "OK" and "Done" appear
diff --git a/trunk/Documentation/tty.txt b/trunk/Documentation/tty.txt
index 3958cf746dde..8ff7bc2a0811 100644
--- a/trunk/Documentation/tty.txt
+++ b/trunk/Documentation/tty.txt
@@ -22,7 +22,7 @@ copy of the structure. You must not re-register over the top of the line
discipline even with the same data or your computer again will be eaten by
demons.
-In order to remove a line discipline call tty_register_ldisc passing NULL.
+In order to remove a line discipline call tty_unregister_ldisc().
In ancient times this always worked. In modern times the function will
return -EBUSY if the ldisc is currently in use. Since the ldisc referencing
code manages the module counts this should not usually be a concern.
diff --git a/trunk/Documentation/usb/sn9c102.txt b/trunk/Documentation/usb/sn9c102.txt
index cf9a1187edce..3f8a119db31b 100644
--- a/trunk/Documentation/usb/sn9c102.txt
+++ b/trunk/Documentation/usb/sn9c102.txt
@@ -297,6 +297,7 @@ Vendor ID Product ID
0x0c45 0x602a
0x0c45 0x602b
0x0c45 0x602c
+0x0c45 0x602d
0x0c45 0x6030
0x0c45 0x6080
0x0c45 0x6082
@@ -333,6 +334,7 @@ Model Manufacturer
----- ------------
HV7131D Hynix Semiconductor, Inc.
MI-0343 Micron Technology, Inc.
+OV7630 OmniVision Technologies, Inc.
PAS106B PixArt Imaging, Inc.
PAS202BCB PixArt Imaging, Inc.
TAS5110C1B Taiwan Advanced Sensor Corporation
@@ -470,9 +472,11 @@ order):
- Luca Capello for the donation of a webcam;
- Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
donation of a webcam;
+- Jon Hollstrom for the donation of a webcam;
- Carlos Eduardo Medaglia Dyonisio, who added the support for the PAS202BCB
image sensor;
- Stefano Mozzi, who donated 45 EU;
+- Andrew Pearce for the donation of a webcam;
- Bertrik Sikken, who reverse-engineered and documented the Huffman compression
algorithm used in the SN9C10x controllers and implemented the first decoder;
- Mizuno Takafumi for the donation of a webcam;
diff --git a/trunk/Documentation/usb/usbmon.txt b/trunk/Documentation/usb/usbmon.txt
index 2f8431f92b77..f1896ee3bb2a 100644
--- a/trunk/Documentation/usb/usbmon.txt
+++ b/trunk/Documentation/usb/usbmon.txt
@@ -101,6 +101,13 @@ Here is the list of words, from left to right:
or 3 and 2 positions, correspondingly.
- URB Status. This field makes no sense for submissions, but is present
to help scripts with parsing. In error case, it contains the error code.
+ In case of a setup packet, it contains a Setup Tag. If scripts read a number
+ in this field, the proceed to read Data Length. Otherwise, they read
+ the setup packet before reading the Data Length.
+- Setup packet, if present, consists of 5 words: one of each for bmRequestType,
+ bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0.
+ These words are safe to decode if Setup Tag was 's'. Otherwise, the setup
+ packet was present, but not captured, and the fields contain filler.
- Data Length. This is the actual length in the URB.
- Data tag. The usbmon may not always capture data, even if length is nonzero.
Only if tag is '=', the data words are present.
@@ -125,25 +132,31 @@ class ParsedLine {
String data_str = st.nextToken();
int len = data_str.length() / 2;
int i;
+ int b; // byte is signed, apparently?! XXX
for (i = 0; i < len; i++) {
- data[data_len] = Byte.parseByte(
- data_str.substring(i*2, i*2 + 2),
- 16);
+ // data[data_len] = Byte.parseByte(
+ // data_str.substring(i*2, i*2 + 2),
+ // 16);
+ b = Integer.parseInt(
+ data_str.substring(i*2, i*2 + 2),
+ 16);
+ if (b >= 128)
+ b *= -1;
+ data[data_len] = (byte) b;
data_len++;
}
}
}
}
-This format is obviously deficient. For example, the setup packet for control
-transfers is not delivered. This will change in the future.
+This format may be changed in the future.
Examples:
-An input control transfer to get a port status:
+An input control transfer to get a port status.
-d74ff9a0 2640288196 S Ci:001:00 -115 4 <
-d74ff9a0 2640288202 C Ci:001:00 0 4 = 01010100
+d5ea89a0 3575914555 S Ci:001:00 s a3 00 0000 0003 0004 4 <
+d5ea89a0 3575914560 C Ci:001:00 0 4 = 01050000
An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
to a storage device at address 5:
diff --git a/trunk/Documentation/video4linux/API.html b/trunk/Documentation/video4linux/API.html
index 4b3d8f640a4a..441407b12a9f 100644
--- a/trunk/Documentation/video4linux/API.html
+++ b/trunk/Documentation/video4linux/API.html
@@ -1,399 +1,16 @@
-
-Video4Linux Kernel API Reference v0.1:19990430
-
-
-
-
-
-Devices
-Video4Linux provides the following sets of device files. These live on the
-character device formerly known as "/dev/bttv". /dev/bttv should be a
-symlink to /dev/video0 for most people.
-
-
-| Device Name | Minor Range | Function |
-
|---|
| /dev/video | 0-63 | Video Capture Interface |
-
| /dev/radio | 64-127 | AM/FM Radio Devices |
-
| /dev/vtx | 192-223 | Teletext Interface Chips |
-
| /dev/vbi | 224-239 | Raw VBI Data (Intercast/teletext) |
-
-
-Video4Linux programs open and scan the devices to find what they are looking
-for. Capability queries define what each interface supports. The
-described API is only defined for video capture cards. The relevant subset
-applies to radio cards. Teletext interfaces talk the existing VTX API.
-
-
Capability Query Ioctl
-The VIDIOCGCAP ioctl call is used to obtain the capability
-information for a video device. The struct video_capability object
-passed to the ioctl is completed and returned. It contains the following
-information
-
-
-| name[32] | Canonical name for this interface |
-
| type | Type of interface |
-
| channels | Number of radio/tv channels if appropriate |
-
| audios | Number of audio devices if appropriate |
-
| maxwidth | Maximum capture width in pixels |
-
| maxheight | Maximum capture height in pixels |
-
| minwidth | Minimum capture width in pixels |
-
| minheight | Minimum capture height in pixels |
-
-
-The type field lists the capability flags for the device. These are
-as follows
-
-
-| Name | Description |
-
|---|
| VID_TYPE_CAPTURE | Can capture to memory |
-
| VID_TYPE_TUNER | Has a tuner of some form |
-
| VID_TYPE_TELETEXT | Has teletext capability |
-
| VID_TYPE_OVERLAY | Can overlay its image onto the frame buffer |
-
| VID_TYPE_CHROMAKEY | Overlay is Chromakeyed |
-
| VID_TYPE_CLIPPING | Overlay clipping is supported |
-
| VID_TYPE_FRAMERAM | Overlay overwrites frame buffer memory |
-
| VID_TYPE_SCALES | The hardware supports image scaling |
-
| VID_TYPE_MONOCHROME | Image capture is grey scale only |
-
| VID_TYPE_SUBCAPTURE | Capture can be of only part of the image |
-
-
-The minimum and maximum sizes listed for a capture device do not imply all
-that all height/width ratios or sizes within the range are possible. A
-request to set a size will be honoured by the largest available capture
-size whose capture is no large than the requested rectangle in either
-direction. For example the quickcam has 3 fixed settings.
-
-
Frame Buffer
-Capture cards that drop data directly onto the frame buffer must be told the
-base address of the frame buffer, its size and organisation. This is a
-privileged ioctl and one that eventually X itself should set.
-
-The VIDIOCSFBUF ioctl sets the frame buffer parameters for a capture
-card. If the card does not do direct writes to the frame buffer then this
-ioctl will be unsupported. The VIDIOCGFBUF ioctl returns the
-currently used parameters. The structure used in both cases is a
-struct video_buffer.
-
-
-| void *base | Base physical address of the buffer |
-
| int height | Height of the frame buffer |
-
| int width | Width of the frame buffer |
-
| int depth | Depth of the frame buffer |
-
| int bytesperline | Number of bytes of memory between the start of two adjacent lines |
-
-
-Note that these values reflect the physical layout of the frame buffer.
-The visible area may be smaller. In fact under XFree86 this is commonly the
-case. XFree86 DGA can provide the parameters required to set up this ioctl.
-Setting the base address to NULL indicates there is no physical frame buffer
-access.
-
-
Capture Windows
-The capture area is described by a struct video_window. This defines
-a capture area and the clipping information if relevant. The
-VIDIOCGWIN ioctl recovers the current settings and the
-VIDIOCSWIN sets new values. A successful call to VIDIOCSWIN
-indicates that a suitable set of parameters have been chosen. They do not
-indicate that exactly what was requested was granted. The program should
-call VIDIOCGWIN to check if the nearest match was suitable. The
-struct video_window contains the following fields.
-
-
-| x | The X co-ordinate specified in X windows format. |
-
| y | The Y co-ordinate specified in X windows format. |
-
| width | The width of the image capture. |
-
| height | The height of the image capture. |
-
| chromakey | A host order RGB32 value for the chroma key. |
-
| flags | Additional capture flags. |
-
| clips | A list of clipping rectangles. (Set only) |
-
| clipcount | The number of clipping rectangles. (Set only) |
-
-
-Clipping rectangles are passed as an array. Each clip consists of the following
-fields available to the user.
-
-
-| x | X co-ordinate of rectangle to skip |
-
| y | Y co-ordinate of rectangle to skip |
-
| width | Width of rectangle to skip |
-
| height | Height of rectangle to skip |
-
-
-Merely setting the window does not enable capturing. Overlay capturing
-(i.e. PCI-PCI transfer to the frame buffer of the video card)
-is activated by passing the VIDIOCCAPTURE ioctl a value of 1, and
-disabled by passing it a value of 0.
-
-Some capture devices can capture a subfield of the image they actually see.
-This is indicated when VIDEO_TYPE_SUBCAPTURE is defined.
-The video_capture describes the time and special subfields to capture.
-The video_capture structure contains the following fields.
-
-
-| x | X co-ordinate of source rectangle to grab |
-
| y | Y co-ordinate of source rectangle to grab |
-
| width | Width of source rectangle to grab |
-
| height | Height of source rectangle to grab |
-
| decimation | Decimation to apply |
-
| flags | Flag settings for grabbing |
-
-The available flags are
-
-
-| Name | Description |
-
|---|
| VIDEO_CAPTURE_ODD | Capture only odd frames |
-
| VIDEO_CAPTURE_EVEN | Capture only even frames |
-
-
-
Video Sources
-Each video4linux video or audio device captures from one or more
-source channels. Each channel can be queries with the
-VDIOCGCHAN ioctl call. Before invoking this function the caller
-must set the channel field to the channel that is being queried. On return
-the struct video_channel is filled in with information about the
-nature of the channel itself.
-
-The VIDIOCSCHAN ioctl takes an integer argument and switches the
-capture to this input. It is not defined whether parameters such as colour
-settings or tuning are maintained across a channel switch. The caller should
-maintain settings as desired for each channel. (This is reasonable as
-different video inputs may have different properties).
-
-The struct video_channel consists of the following
-
-
-| channel | The channel number |
-
| name | The input name - preferably reflecting the label
-on the card input itself |
-
| tuners | Number of tuners for this input |
-
| flags | Properties the tuner has |
-
| type | Input type (if known) |
-
| norm | The norm for this channel |
-
-
-The flags defined are
-
-
-| VIDEO_VC_TUNER | Channel has tuners. |
-
| VIDEO_VC_AUDIO | Channel has audio. |
-
| VIDEO_VC_NORM | Channel has norm setting. |
-
-
-The types defined are
-
-
-| VIDEO_TYPE_TV | The input is a TV input. |
-
| VIDEO_TYPE_CAMERA | The input is a camera. |
-
-
-
Image Properties
-The image properties of the picture can be queried with the VIDIOCGPICT
-ioctl which fills in a struct video_picture. The VIDIOCSPICT
-ioctl allows values to be changed. All values except for the palette type
-are scaled between 0-65535.
-
-The struct video_picture consists of the following fields
-
-
-| brightness | Picture brightness |
-
| hue | Picture hue (colour only) |
-
| colour | Picture colour (colour only) |
-
| contrast | Picture contrast |
-
| whiteness | The whiteness (greyscale only) |
-
| depth | The capture depth (may need to match the frame buffer depth) |
-
| palette | Reports the palette that should be used for this image |
-
-
-The following palettes are defined
-
-
-| VIDEO_PALETTE_GREY | Linear intensity grey scale (255 is brightest). |
-
| VIDEO_PALETTE_HI240 | The BT848 8bit colour cube. |
-
| VIDEO_PALETTE_RGB565 | RGB565 packed into 16 bit words. |
-
| VIDEO_PALETTE_RGB555 | RGV555 packed into 16 bit words, top bit undefined. |
-
| VIDEO_PALETTE_RGB24 | RGB888 packed into 24bit words. |
-
| VIDEO_PALETTE_RGB32 | RGB888 packed into the low 3 bytes of 32bit words. The top 8bits are undefined. |
-
| VIDEO_PALETTE_YUV422 | Video style YUV422 - 8bits packed 4bits Y 2bits U 2bits V |
-
| VIDEO_PALETTE_YUYV | Describe me |
-
| VIDEO_PALETTE_UYVY | Describe me |
-
| VIDEO_PALETTE_YUV420 | YUV420 capture |
-
| VIDEO_PALETTE_YUV411 | YUV411 capture |
-
| VIDEO_PALETTE_RAW | RAW capture (BT848) |
-
| VIDEO_PALETTE_YUV422P | YUV 4:2:2 Planar |
-
| VIDEO_PALETTE_YUV411P | YUV 4:1:1 Planar |
-
-
-
Tuning
-Each video input channel can have one or more tuners associated with it. Many
-devices will not have tuners. TV cards and radio cards will have one or more
-tuners attached.
-
-Tuners are described by a struct video_tuner which can be obtained by
-the VIDIOCGTUNER ioctl. Fill in the tuner number in the structure
-then pass the structure to the ioctl to have the data filled in. The
-tuner can be switched using VIDIOCSTUNER which takes an integer argument
-giving the tuner to use. A struct tuner has the following fields
-
-
-| tuner | Number of the tuner |
-
| name | Canonical name for this tuner (eg FM/AM/TV) |
-
| rangelow | Lowest tunable frequency |
-
| rangehigh | Highest tunable frequency |
-
| flags | Flags describing the tuner |
-
| mode | The video signal mode if relevant |
-
| signal | Signal strength if known - between 0-65535 |
-
-
-The following flags exist
-
-
-| VIDEO_TUNER_PAL | PAL tuning is supported |
-
| VIDEO_TUNER_NTSC | NTSC tuning is supported |
-
| VIDEO_TUNER_SECAM | SECAM tuning is supported |
-
| VIDEO_TUNER_LOW | Frequency is in a lower range |
-
| VIDEO_TUNER_NORM | The norm for this tuner is settable |
-
| VIDEO_TUNER_STEREO_ON | The tuner is seeing stereo audio |
-
| VIDEO_TUNER_RDS_ON | The tuner is seeing a RDS datastream |
-
| VIDEO_TUNER_MBS_ON | The tuner is seeing a MBS datastream |
-
-
-The following modes are defined
-
-
-| VIDEO_MODE_PAL | The tuner is in PAL mode |
-
| VIDEO_MODE_NTSC | The tuner is in NTSC mode |
-
| VIDEO_MODE_SECAM | The tuner is in SECAM mode |
-
| VIDEO_MODE_AUTO | The tuner auto switches, or mode does not apply |
-
-
-Tuning frequencies are an unsigned 32bit value in 1/16th MHz or if the
-VIDEO_TUNER_LOW flag is set they are in 1/16th KHz. The current
-frequency is obtained as an unsigned long via the VIDIOCGFREQ ioctl and
-set by the VIDIOCSFREQ ioctl.
-
-
Audio
-TV and Radio devices have one or more audio inputs that may be selected.
-The audio properties are queried by passing a struct video_audio to VIDIOCGAUDIO ioctl. The
-VIDIOCSAUDIO ioctl sets audio properties.
-
-The structure contains the following fields
-
-
-| audio | The channel number |
-
| volume | The volume level |
-
| bass | The bass level |
-
| treble | The treble level |
-
| flags | Flags describing the audio channel |
-
| name | Canonical name for the audio input |
-
| mode | The mode the audio input is in |
-
| balance | The left/right balance |
-
| step | Actual step used by the hardware |
-
-
-The following flags are defined
-
-
-| VIDEO_AUDIO_MUTE | The audio is muted |
-
| VIDEO_AUDIO_MUTABLE | Audio muting is supported |
-
| VIDEO_AUDIO_VOLUME | The volume is controllable |
-
| VIDEO_AUDIO_BASS | The bass is controllable |
-
| VIDEO_AUDIO_TREBLE | The treble is controllable |
-
| VIDEO_AUDIO_BALANCE | The balance is controllable |
-
-
-The following decoding modes are defined
-
-
-| VIDEO_SOUND_MONO | Mono signal |
-
| VIDEO_SOUND_STEREO | Stereo signal (NICAM for TV) |
-
| VIDEO_SOUND_LANG1 | European TV alternate language 1 |
-
| VIDEO_SOUND_LANG2 | European TV alternate language 2 |
-
-
-
Reading Images
-Each call to the read syscall returns the next available image
-from the device. It is up to the caller to set format and size (using
-the VIDIOCSPICT and VIDIOCSWIN ioctls) and then to pass a suitable
-size buffer and length to the function. Not all devices will support
-read operations.
-
-A second way to handle image capture is via the mmap interface if supported.
-To use the mmap interface a user first sets the desired image size and depth
-properties. Next the VIDIOCGMBUF ioctl is issued. This reports the size
-of buffer to mmap and the offset within the buffer for each frame. The
-number of frames supported is device dependent and may only be one.
-
-The video_mbuf structure contains the following fields
-
-
-| size | The number of bytes to map |
-
| frames | The number of frames |
-
| offsets | The offset of each frame |
-
-
-Once the mmap has been made the VIDIOCMCAPTURE ioctl starts the
-capture to a frame using the format and image size specified in the
-video_mmap (which should match or be below the initial query size).
-When the VIDIOCMCAPTURE ioctl returns the frame is not
-captured yet, the driver just instructed the hardware to start the
-capture. The application has to use the VIDIOCSYNC ioctl to wait
-until the capture of a frame is finished. VIDIOCSYNC takes the frame
-number you want to wait for as argument.
-
-It is allowed to call VIDIOCMCAPTURE multiple times (with different
-frame numbers in video_mmap->frame of course) and thus have multiple
-outstanding capture requests. A simple way do to double-buffering
-using this feature looks like this:
-
-/* setup everything */
-VIDIOCMCAPTURE(0)
-while (whatever) {
- VIDIOCMCAPTURE(1)
- VIDIOCSYNC(0)
- /* process frame 0 while the hardware captures frame 1 */
- VIDIOCMCAPTURE(0)
- VIDIOCSYNC(1)
- /* process frame 1 while the hardware captures frame 0 */
-}
-
-Note that you are not limited to only two frames. The API
-allows up to 32 frames, the VIDIOCGMBUF ioctl returns the number of
-frames the driver granted. Thus it is possible to build deeper queues
-to avoid loosing frames on load peaks.
-
-While capturing to memory the driver will make a "best effort" attempt
-to capture to screen as well if requested. This normally means all
-frames that "miss" memory mapped capture will go to the display.
-
-A final ioctl exists to allow a device to obtain related devices if a
-driver has multiple components (for example video0 may not be associated
-with vbi0 which would cause an intercast display program to make a bad
-mistake). The VIDIOCGUNIT ioctl reports the unit numbers of the associated
-devices if any exist. The video_unit structure has the following fields.
-
-
-| video | Video capture device |
-
| vbi | VBI capture device |
-
| radio | Radio device |
-
| audio | Audio mixer |
-
| teletext | Teletext device |
-
-
-
RDS Datastreams
-For radio devices that support it, it is possible to receive Radio Data
-System (RDS) data by means of a read() on the device. The data is packed in
-groups of three, as follows:
-
-| First Octet | Least Significant Byte of RDS Block |
-| Second Octet | Most Significant Byte of RDS Block
- |
| Third Octet | Bit 7: | Error bit. Indicates that
-an uncorrectable error occurred during reception of this block. |
-| | Bit 6: | Corrected bit. Indicates that
-an error was corrected for this data block. |
-| | Bits 5-3: | Received Offset. Indicates the
-offset received by the sync system. |
-| | Bits 2-0: | Offset Name. Indicates the
-offset applied to this data. |
-
-
-
+V4L API
+Video For Linux APIs
+
diff --git a/trunk/Documentation/video4linux/CARDLIST.bttv b/trunk/Documentation/video4linux/CARDLIST.bttv
index e46761c39e3f..62a12a08e2ac 100644
--- a/trunk/Documentation/video4linux/CARDLIST.bttv
+++ b/trunk/Documentation/video4linux/CARDLIST.bttv
@@ -1,4 +1,4 @@
-card=0 - *** UNKNOWN/GENERIC ***
+card=0 - *** UNKNOWN/GENERIC ***
card=1 - MIRO PCTV
card=2 - Hauppauge (bt848)
card=3 - STB, Gateway P/N 6000699 (bt848)
@@ -119,3 +119,17 @@ card=117 - NGS NGSTV+
card=118 - LMLBT4
card=119 - Tekram M205 PRO
card=120 - Conceptronic CONTVFMi
+card=121 - Euresys Picolo Tetra
+card=122 - Spirit TV Tuner
+card=123 - AVerMedia AVerTV DVB-T 771
+card=124 - AverMedia AverTV DVB-T 761
+card=125 - MATRIX Vision Sigma-SQ
+card=126 - MATRIX Vision Sigma-SLC
+card=127 - APAC Viewcomp 878(AMAX)
+card=128 - DVICO FusionHDTV DVB-T Lite
+card=129 - V-Gear MyVCD
+card=130 - Super TV Tuner
+card=131 - Tibet Systems 'Progress DVR' CS16
+card=132 - Kodicom 4400R (master)
+card=133 - Kodicom 4400R (slave)
+card=134 - Adlink RTV24
diff --git a/trunk/Documentation/video4linux/CARDLIST.cx88 b/trunk/Documentation/video4linux/CARDLIST.cx88
new file mode 100644
index 000000000000..03deb0726aa4
--- /dev/null
+++ b/trunk/Documentation/video4linux/CARDLIST.cx88
@@ -0,0 +1,32 @@
+card=0 - UNKNOWN/GENERIC
+card=1 - Hauppauge WinTV 34xxx models
+card=2 - GDI Black Gold
+card=3 - PixelView
+card=4 - ATI TV Wonder Pro
+card=5 - Leadtek Winfast 2000XP Expert
+card=6 - AverTV Studio 303 (M126)
+card=7 - MSI TV-@nywhere Master
+card=8 - Leadtek Winfast DV2000
+card=9 - Leadtek PVR 2000
+card=10 - IODATA GV-VCP3/PCI
+card=11 - Prolink PlayTV PVR
+card=12 - ASUS PVR-416
+card=13 - MSI TV-@nywhere
+card=14 - KWorld/VStream XPert DVB-T
+card=15 - DViCO FusionHDTV DVB-T1
+card=16 - KWorld LTV883RF
+card=17 - DViCO FusionHDTV 3 Gold-Q
+card=18 - Hauppauge Nova-T DVB-T
+card=19 - Conexant DVB-T reference design
+card=20 - Provideo PV259
+card=21 - DViCO FusionHDTV DVB-T Plus
+card=22 - digitalnow DNTV Live! DVB-T
+card=23 - pcHDTV HD3000 HDTV
+card=24 - Hauppauge WinTV 28xxx (Roslyn) models
+card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
+card=26 - IODATA GV/BCTV7E
+card=27 - PixelView PlayTV Ultra Pro (Stereo)
+card=28 - DViCO FusionHDTV 3 Gold-T
+card=29 - ADS Tech Instant TV DVB-T PCI
+card=30 - TerraTec Cinergy 1400 DVB-T
+card=31 - DViCO FusionHDTV 5 Gold
diff --git a/trunk/Documentation/video4linux/CARDLIST.saa7134 b/trunk/Documentation/video4linux/CARDLIST.saa7134
index a6c82fa4de02..1b5a3a9ffbe2 100644
--- a/trunk/Documentation/video4linux/CARDLIST.saa7134
+++ b/trunk/Documentation/video4linux/CARDLIST.saa7134
@@ -1,10 +1,10 @@
- 0 -> UNKNOWN/GENERIC
+ 0 -> UNKNOWN/GENERIC
1 -> Proteus Pro [philips reference design] [1131:2001,1131:2001]
2 -> LifeView FlyVIDEO3000 [5168:0138,4e42:0138]
3 -> LifeView FlyVIDEO2000 [5168:0138]
4 -> EMPRESS [1131:6752]
5 -> SKNet Monster TV [1131:4e85]
- 6 -> Tevion MD 9717
+ 6 -> Tevion MD 9717
7 -> KNC One TV-Station RDS / Typhoon TV Tuner RDS [1131:fe01,1894:fe01]
8 -> Terratec Cinergy 400 TV [153B:1142]
9 -> Medion 5044
@@ -20,16 +20,45 @@
19 -> Compro VideoMate TV [185b:c100]
20 -> Matrox CronosPlus [102B:48d0]
21 -> 10MOONS PCI TV CAPTURE CARD [1131:2001]
- 22 -> Medion 2819/ AverMedia M156 [1461:a70b,1461:2115]
+ 22 -> AverMedia M156 / Medion 2819 [1461:a70b]
23 -> BMK MPEX Tuner
24 -> KNC One TV-Station DVR [1894:a006]
25 -> ASUS TV-FM 7133 [1043:4843]
26 -> Pinnacle PCTV Stereo (saa7134) [11bd:002b]
- 27 -> Manli MuchTV M-TV002
- 28 -> Manli MuchTV M-TV001
+ 27 -> Manli MuchTV M-TV002/Behold TV 403 FM
+ 28 -> Manli MuchTV M-TV001/Behold TV 401
29 -> Nagase Sangyo TransGear 3000TV [1461:050c]
30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM) [1019:4cb4]
31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM) [1019:4cb5]
32 -> AVACS SmartTV
33 -> AVerMedia DVD EZMaker [1461:10ff]
- 34 -> LifeView FlyTV Platinum33 mini [5168:0212]
+ 34 -> Noval Prime TV 7133
+ 35 -> AverMedia AverTV Studio 305 [1461:2115]
+ 36 -> UPMOST PURPLE TV [12ab:0800]
+ 37 -> Items MuchTV Plus / IT-005
+ 38 -> Terratec Cinergy 200 TV [153B:1152]
+ 39 -> LifeView FlyTV Platinum Mini [5168:0212]
+ 40 -> Compro VideoMate TV PVR/FM [185b:c100]
+ 41 -> Compro VideoMate TV Gold+ [185b:c100]
+ 42 -> Sabrent SBT-TVFM (saa7130)
+ 43 -> :Zolid Xpert TV7134
+ 44 -> Empire PCI TV-Radio LE
+ 45 -> Avermedia AVerTV Studio 307 [1461:9715]
+ 46 -> AVerMedia Cardbus TV/Radio (E500) [1461:d6ee]
+ 47 -> Terratec Cinergy 400 mobile [153b:1162]
+ 48 -> Terratec Cinergy 600 TV MK3 [153B:1158]
+ 49 -> Compro VideoMate Gold+ Pal [185b:c200]
+ 50 -> Pinnacle PCTV 300i DVB-T + PAL [11bd:002d]
+ 51 -> ProVideo PV952 [1540:9524]
+ 52 -> AverMedia AverTV/305 [1461:2108]
+ 53 -> ASUS TV-FM 7135 [1043:4845]
+ 54 -> LifeView FlyTV Platinum FM [5168:0214,1489:0214]
+ 55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306]
+ 56 -> Avermedia AVerTV 307 [1461:a70a]
+ 57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
+ 58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0370]
+ 59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
+ 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
+ 61 -> Philips TOUGH DVB-T reference design [1131:2004]
+ 62 -> Compro VideoMate TV Gold+II
+ 63 -> Kworld Xpert TV PVR7134
diff --git a/trunk/Documentation/video4linux/CARDLIST.tuner b/trunk/Documentation/video4linux/CARDLIST.tuner
index f7bafe862ba0..f3302e1b1b9c 100644
--- a/trunk/Documentation/video4linux/CARDLIST.tuner
+++ b/trunk/Documentation/video4linux/CARDLIST.tuner
@@ -44,3 +44,23 @@ tuner=42 - Philips 1236D ATSC/NTSC daul in
tuner=43 - Philips NTSC MK3 (FM1236MK3 or FM1236/F)
tuner=44 - Philips 4 in 1 (ATI TV Wonder Pro/Conexant)
tuner=45 - Microtune 4049 FM5
+tuner=46 - Panasonic VP27s/ENGE4324D
+tuner=47 - LG NTSC (TAPE series)
+tuner=48 - Tenna TNF 8831 BGFF)
+tuner=49 - Microtune 4042 FI5 ATSC/NTSC dual in
+tuner=50 - TCL 2002N
+tuner=51 - Philips PAL/SECAM_D (FM 1256 I-H3)
+tuner=52 - Thomson DDT 7610 (ATSC/NTSC)
+tuner=53 - Philips FQ1286
+tuner=54 - tda8290+75
+tuner=55 - LG PAL (TAPE series)
+tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
+tuner=57 - Philips FQ1236A MK4
+tuner=58 - Ymec TVision TVF-8531MF/8831MF/8731MF
+tuner=59 - Ymec TVision TVF-5533MF
+tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
+tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
+tuner=62 - Philips TEA5767HN FM Radio
+tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
+tuner=64 - LG TDVS-H062F/TUA6034
+tuner=65 - Ymec TVF66T5-B/DFF
diff --git a/trunk/Documentation/video4linux/README.saa7134 b/trunk/Documentation/video4linux/README.saa7134
index 1a446c65365e..1f788e498eff 100644
--- a/trunk/Documentation/video4linux/README.saa7134
+++ b/trunk/Documentation/video4linux/README.saa7134
@@ -57,6 +57,15 @@ Cards can use either of these two crystals (xtal):
- 24.576MHz -> .audio_clock=0x200000
(xtal * .audio_clock = 51539600)
+Some details about 30/34/35:
+
+ - saa7130 - low-price chip, doesn't have mute, that is why all those
+ cards should have .mute field defined in their tuner structure.
+
+ - saa7134 - usual chip
+
+ - saa7133/35 - saa7135 is probably a marketing decision, since all those
+ chips identifies itself as 33 on pci.
Credits
=======
diff --git a/trunk/Documentation/video4linux/bttv/Cards b/trunk/Documentation/video4linux/bttv/Cards
index 7f8c7eb70ab2..8f1941ede4da 100644
--- a/trunk/Documentation/video4linux/bttv/Cards
+++ b/trunk/Documentation/video4linux/bttv/Cards
@@ -20,7 +20,7 @@ All other cards only differ by additional components as tuners, sound
decoders, EEPROMs, teletext decoders ...
-Unsupported Cards:
+Unsupported Cards:
------------------
Cards with Zoran (ZR) or Philips (SAA) or ISA are not supported by
@@ -50,11 +50,11 @@ Bt848a/Bt849 single crytal operation support possible!!!
Miro/Pinnacle PCTV
------------------
-- Bt848
- some (all??) come with 2 crystals for PAL/SECAM and NTSC
+- Bt848
+ some (all??) come with 2 crystals for PAL/SECAM and NTSC
- PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
- MSP34xx sound decoder on add on board
- decoder is supported but AFAIK does not yet work
+ decoder is supported but AFAIK does not yet work
(other sound MUX setting in GPIO port needed??? somebody who fixed this???)
- 1 tuner, 1 composite and 1 S-VHS input
- tuner type is autodetected
@@ -70,7 +70,7 @@ in 1997!
Hauppauge Win/TV pci
--------------------
-There are many different versions of the Hauppauge cards with different
+There are many different versions of the Hauppauge cards with different
tuners (TV+Radio ...), teletext decoders.
Note that even cards with same model numbers have (depending on the revision)
different chips on it.
@@ -80,22 +80,22 @@ different chips on it.
- PAL, SECAM, NTSC or tuner with or without Radio support
e.g.:
- PAL:
+ PAL:
TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
-
+
NTSC:
TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
TSA5518: no datasheet available on Philips site
-- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
+- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
SAA5246 (I2C 0x22) is supported
-- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
+- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
with configuration information
I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
- 1 tuner, 1 composite and (depending on model) 1 S-VHS input
- 14052B: mux for selection of sound source
-- sound decoder: TDA9800, MSP34xx (stereo cards)
+- sound decoder: TDA9800, MSP34xx (stereo cards)
Askey CPH-Series
@@ -108,17 +108,17 @@ Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink)
CPH05x: BT878 with FM
CPH06x: BT878 (w/o FM)
CPH07x: BT878 capture only
-
+
TV standards:
CPH0x0: NTSC-M/M
CPH0x1: PAL-B/G
CPH0x2: PAL-I/I
CPH0x3: PAL-D/K
- CPH0x4: SECAM-L/L
- CPH0x5: SECAM-B/G
- CPH0x6: SECAM-D/K
- CPH0x7: PAL-N/N
- CPH0x8: PAL-B/H
+ CPH0x4: SECAM-L/L
+ CPH0x5: SECAM-B/G
+ CPH0x6: SECAM-D/K
+ CPH0x7: PAL-N/N
+ CPH0x8: PAL-B/H
CPH0x9: PAL-M/M
CPH03x was often sold as "TV capturer".
@@ -174,7 +174,7 @@ Lifeview Flyvideo Series:
"The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98."
Their Bt8x8 cards are listed as discontinued.
Flyvideo 2000S was probably sold as Flyvideo 3000 in some contries(Europe?).
- The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
+ The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
"Flyvideo II" had been the name for the 848 cards, nowadays (in Germany)
this name is re-used for LR50 Rev.W.
@@ -235,12 +235,12 @@ Prolink
Multimedia TV packages (card + software pack):
PixelView Play TV Theater - (Model: PV-M4200) = PixelView Play TV pro + Software
PixelView Play TV PAK - (Model: PV-BT878P+ REV 4E)
- PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A )
+ PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A )
PixelView Studio PAK - (Model: M2200 REV 4C / 8D / 10A )
PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E)
PixelView DigitalVCR PAK - (Model: PV-M2400 REV 4C / 8D / 10A )
- PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800
+ PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800
PixelView PlayTV XP PV-M4700,PV-M4700(w/FM)
PixelView PlayTV DVR PV-M4600 package contents:PixelView PlayTV pro, windvr & videoMail s/w
@@ -254,7 +254,7 @@ Prolink
DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030
DTV2000 DVB-S = Twinhan VP-1020
-
+
Video Conferencing:
PixelView Meeting PAK - (Model: PV-BT878P)
PixelView Meeting PAK Lite - (Model: PV-BT878P)
@@ -308,7 +308,7 @@ KNC One
newer Cards have saa7134, but model name stayed the same?
-Provideo
+Provideo
--------
PV951 or PV-951 (also are sold as:
Boeder TV-FM Video Capture Card
@@ -353,7 +353,7 @@ AVerMedia
AVerTV
AVerTV Stereo
AVerTV Studio (w/FM)
- AVerMedia TV98 with Remote
+ AVerMedia TV98 with Remote
AVerMedia TV/FM98 Stereo
AVerMedia TVCAM98
TVCapture (Bt848)
@@ -373,7 +373,7 @@ AVerMedia
(1) Daughterboard MB68-A with TDA9820T and TDA9840T
(2) Sony NE41S soldered (stereo sound?)
(3) Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz
-
+
US site has different drivers for (as of 09/2002):
EZ Capture/InterCam PCI (BT-848 chip)
EZ Capture/InterCam PCI (BT-878 chip)
@@ -437,7 +437,7 @@ Terratec
Terra TValueRadio, "LR102 Rev.C" printed on the PCB
Terra TV/Radio+ Version 1.0, "80-CP2830100-0" TTTV3 printed on the PCB,
"CPH010-E83" on the back, SAA6588T, TDA9873H
- Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB,
+ Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB,
"CPH011-D83" on back
Terra TValue Version 1.0 "ceb105.PCB" (really identical to Terra TV+ Version 1.0)
Terra TValue New Revision "LR102 Rec.C"
@@ -528,7 +528,7 @@ Koutech
KW-606RSF
KW-607A (capture only)
KW-608 (Zoran capture only)
-
+
IODATA (jp)
------
GV-BCTV/PCI
@@ -542,15 +542,15 @@ Canopus (jp)
-------
WinDVR = Kworld "KW-TVL878RF"
-www.sigmacom.co.kr
+www.sigmacom.co.kr
------------------
- Sigma Cyber TV II
+ Sigma Cyber TV II
www.sasem.co.kr
---------------
Litte OnAir TV
-hama
+hama
----
TV/Radio-Tuner Card, PCI (Model 44677) = CPH051
@@ -638,7 +638,7 @@ Media-Surfer (esc-kathrein.de)
Jetway (www.jetway.com.tw)
--------------------------
- JW-TV 878M
+ JW-TV 878M
JW-TV 878 = KWorld KW-TV878RF
Galaxis
@@ -715,7 +715,7 @@ Hauppauge
809 MyVideo
872 MyTV2Go FM
-
+
546 WinTV Nova-S CI
543 WinTV Nova
907 Nova-S USB
@@ -739,7 +739,7 @@ Hauppauge
832 MyTV2Go
869 MyTV2Go-FM
805 MyVideo (USB)
-
+
Matrix-Vision
-------------
@@ -764,7 +764,7 @@ Gallant (www.gallantcom.com) www.minton.com.tw
Intervision IV-550 (bt8x8)
Intervision IV-100 (zoran)
Intervision IV-1000 (bt8x8)
-
+
Asonic (www.asonic.com.cn) (website down)
-----------------------------------------
SkyEye tv 878
@@ -804,11 +804,11 @@ Kworld (www.kworld.com.tw)
JTT/ Justy Corp.http://www.justy.co.jp/ (www.jtt.com.jp website down)
---------------------------------------------------------------------
- JTT-02 (JTT TV) "TV watchmate pro" (bt848)
+ JTT-02 (JTT TV) "TV watchmate pro" (bt848)
ADS www.adstech.com
-------------------
- Channel Surfer TV ( CHX-950 )
+ Channel Surfer TV ( CHX-950 )
Channel Surfer TV+FM ( CHX-960FM )
AVEC www.prochips.com
@@ -874,7 +874,7 @@ www.ids-imaging.de
------------------
Falcon Series (capture only)
In USA: http://www.theimagingsource.com/
- DFG/LC1
+ DFG/LC1
www.sknet-web.co.jp
-------------------
@@ -890,7 +890,7 @@ Cybertainment
CyberMail Xtreme
These are Flyvideo
-VCR (http://www.vcrinc.com/)
+VCR (http://www.vcrinc.com/)
---
Video Catcher 16
@@ -920,7 +920,7 @@ Sdisilk www.sdisilk.com/
SDI Silk 200 SDI Input Card
www.euresys.com
- PICOLO series
+ PICOLO series
PMC/Pace
www.pacecom.co.uk website closed
diff --git a/trunk/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt b/trunk/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
new file mode 100644
index 000000000000..93fec32a1188
--- /dev/null
+++ b/trunk/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
@@ -0,0 +1,54 @@
+The controls for the mux are GPIO [0,1] for source, and GPIO 2 for muting.
+
+GPIO0 GPIO1
+ 0 0 TV Audio
+ 1 0 FM radio
+ 0 1 Line-In
+ 1 1 Mono tuner bypass or CD passthru (tuner specific)
+
+GPIO 16(i believe) is tied to the IR port (if present).
+
+------------------------------------------------------------------------------------
+
+>From the data sheet:
+ Register 24'h20004 PCI Interrupt Status
+ bit [18] IR_SMP_INT Set when 32 input samples have been collected over
+ gpio[16] pin into GP_SAMPLE register.
+
+What's missing from the data sheet:
+
+Setup 4KHz sampling rate (roughly 2x oversampled; good enough for our RC5
+compat remote)
+set register 0x35C050 to 0xa80a80
+
+enable sampling
+set register 0x35C054 to 0x5
+
+Of course, enable the IRQ bit 18 in the interrupt mask register .(and
+provide for a handler)
+
+GP_SAMPLE register is at 0x35C058
+
+Bits are then right shifted into the GP_SAMPLE register at the specified
+rate; you get an interrupt when a full DWORD is recieved.
+You need to recover the actual RC5 bits out of the (oversampled) IR sensor
+bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An
+actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
+
+I'm pretty sure when no IR signal is present the receiver is always in a
+marking state(1); but stray light, etc can cause intermittent noise values
+as well. Remember, this is a free running sample of the IR receiver state
+over time, so don't assume any sample starts at any particular place.
+
+http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
+This data sheet (google search) seems to have a lovely description of the
+RC5 basics
+
+http://users.pandora.be/nenya/electronics/rc5/ and more data
+
+http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
+and even a reference to how to decode a bi-phase data stream.
+
+http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm
+still more info
+
diff --git a/trunk/Documentation/video4linux/lifeview.txt b/trunk/Documentation/video4linux/lifeview.txt
new file mode 100644
index 000000000000..b07ea79c2b7e
--- /dev/null
+++ b/trunk/Documentation/video4linux/lifeview.txt
@@ -0,0 +1,42 @@
+collecting data about the lifeview models and the config coding on
+gpio pins 0-9 ...
+==================================================================
+
+bt878:
+ LR50 rev. Q ("PARTS: 7031505116), Tuner wurde als Nr. 5 erkannt, Eingänge
+ SVideo, TV, Composite, Audio, Remote. CP9..1=100001001 (1: 0-Ohm-Widerstand
+ gegen GND unbestückt; 0: bestückt)
+
+------------------------------------------------------------------------------
+
+saa7134:
+ /* LifeView FlyTV Platinum FM (LR214WF) */
+ /* "Peter Missel */
+ .name = "LifeView FlyTV Platinum FM",
+ /* GP27 MDT2005 PB4 pin 10 */
+ /* GP26 MDT2005 PB3 pin 9 */
+ /* GP25 MDT2005 PB2 pin 8 */
+ /* GP23 MDT2005 PB1 pin 7 */
+ /* GP22 MDT2005 PB0 pin 6 */
+ /* GP21 MDT2005 PB5 pin 11 */
+ /* GP20 MDT2005 PB6 pin 12 */
+ /* GP19 MDT2005 PB7 pin 13 */
+ /* nc MDT2005 PA3 pin 2 */
+ /* Remote MDT2005 PA2 pin 1 */
+ /* GP18 MDT2005 PA1 pin 18 */
+ /* nc MDT2005 PA0 pin 17 strap low */
+
+ /* GP17 Strap "GP7"=High */
+ /* GP16 Strap "GP6"=High
+ 0=Radio 1=TV
+ Drives SA630D ENCH1 and HEF4052 A1 pins
+ to do FM radio through SIF input */
+ /* GP15 nc */
+ /* GP14 nc */
+ /* GP13 nc */
+ /* GP12 Strap "GP5" = High */
+ /* GP11 Strap "GP4" = High */
+ /* GP10 Strap "GP3" = High */
+ /* GP09 Strap "GP2" = Low */
+ /* GP08 Strap "GP1" = Low */
+ /* GP07.00 nc */
diff --git a/trunk/Documentation/video4linux/not-in-cx2388x-datasheet.txt b/trunk/Documentation/video4linux/not-in-cx2388x-datasheet.txt
new file mode 100644
index 000000000000..edbfe744d21d
--- /dev/null
+++ b/trunk/Documentation/video4linux/not-in-cx2388x-datasheet.txt
@@ -0,0 +1,41 @@
+=================================================================================
+MO_OUTPUT_FORMAT (0x310164)
+
+ Previous default from DScaler: 0x1c1f0008
+ Digit 8: 31-28
+ 28: PREVREMOD = 1
+
+ Digit 7: 27-24 (0xc = 12 = b1100 )
+ 27: COMBALT = 1
+ 26: PAL_INV_PHASE
+ (DScaler apparently set this to 1, resulted in sucky picture)
+
+ Digits 6,5: 23-16
+ 25-16: COMB_RANGE = 0x1f [default] (9 bits -> max 512)
+
+ Digit 4: 15-12
+ 15: DISIFX = 0
+ 14: INVCBF = 0
+ 13: DISADAPT = 0
+ 12: NARROWADAPT = 0
+
+ Digit 3: 11-8
+ 11: FORCE2H
+ 10: FORCEREMD
+ 9: NCHROMAEN
+ 8: NREMODEN
+
+ Digit 2: 7-4
+ 7-6: YCORE
+ 5-4: CCORE
+
+ Digit 1: 3-0
+ 3: RANGE = 1
+ 2: HACTEXT
+ 1: HSFMT
+
+0x47 is the sync byte for MPEG-2 transport stream packets.
+Datasheet incorrectly states to use 47 decimal. 188 is the length.
+All DVB compliant frontends output packets with this start code.
+
+=================================================================================
diff --git a/trunk/Documentation/w1/w1.generic b/trunk/Documentation/w1/w1.generic
index eace3046a858..f937fbe1cacb 100644
--- a/trunk/Documentation/w1/w1.generic
+++ b/trunk/Documentation/w1/w1.generic
@@ -1,19 +1,92 @@
-Any w1 device must be connected to w1 bus master device - for example
-ds9490 usb device or w1-over-GPIO or RS232 converter.
-Driver for w1 bus master must provide several functions(you can find
-them in struct w1_bus_master definition in w1.h) which then will be
-called by w1 core to send various commands over w1 bus(by default it is
-reset and search commands). When some device is found on the bus, w1 core
-checks if driver for it's family is loaded.
-If driver is loaded w1 core creates new w1_slave object and registers it
-in the system(creates some generic sysfs files(struct w1_family_ops in
-w1_family.h), notifies any registered listener and so on...).
-It is device driver's business to provide any communication method
-upstream.
-For example w1_therm driver(ds18?20 thermal sensor family driver)
-provides temperature reading function which is bound to ->rbin() method
-of the above w1_family_ops structure.
-w1_smem - driver for simple 64bit memory cell provides ID reading
-method.
+The 1-wire (w1) subsystem
+------------------------------------------------------------------
+The 1-wire bus is a simple master-slave bus that communicates via a single
+signal wire (plus ground, so two wires).
+
+Devices communicate on the bus by pulling the signal to ground via an open
+drain output and by sampling the logic level of the signal line.
+
+The w1 subsystem provides the framework for managing w1 masters and
+communication with slaves.
+
+All w1 slave devices must be connected to a w1 bus master device.
+
+Example w1 master devices:
+ DS9490 usb device
+ W1-over-GPIO
+ DS2482 (i2c to w1 bridge)
+ Emulated devices, such as a RS232 converter, parallel port adapter, etc
+
+
+What does the w1 subsystem do?
+------------------------------------------------------------------
+When a w1 master driver registers with the w1 subsystem, the following occurs:
+
+ - sysfs entries for that w1 master are created
+ - the w1 bus is periodically searched for new slave devices
+
+When a device is found on the bus, w1 core checks if driver for it's family is
+loaded. If so, the family driver is attached to the slave.
+If there is no driver for the family, a simple sysfs entry is created
+for the slave device.
+
+
+W1 device families
+------------------------------------------------------------------
+Slave devices are handled by a driver written for a family of w1 devices.
+
+A family driver populates a struct w1_family_ops (see w1_family.h) and
+registers with the w1 subsystem.
+
+Current family drivers:
+w1_therm - (ds18?20 thermal sensor family driver)
+ provides temperature reading function which is bound to ->rbin() method
+ of the above w1_family_ops structure.
+
+w1_smem - driver for simple 64bit memory cell provides ID reading method.
You can call above methods by reading appropriate sysfs files.
+
+
+What does a w1 master driver need to implement?
+------------------------------------------------------------------
+
+The driver for w1 bus master must provide at minimum two functions.
+
+Emulated devices must provide the ability to set the output signal level
+(write_bit) and sample the signal level (read_bit).
+
+Devices that support the 1-wire natively must provide the ability to write and
+sample a bit (touch_bit) and reset the bus (reset_bus).
+
+Most hardware provides higher-level functions that offload w1 handling.
+See struct w1_bus_master definition in w1.h for details.
+
+
+w1 master sysfs interface
+------------------------------------------------------------------
+ - a directory for a found device. The format is family-serial
+bus - (standard) symlink to the w1 bus
+driver - (standard) symlink to the w1 driver
+w1_master_attempts - the number of times a search was attempted
+w1_master_max_slave_count
+ - the maximum slaves that may be attached to a master
+w1_master_name - the name of the device (w1_bus_masterX)
+w1_master_search - the number of searches left to do, -1=continual (default)
+w1_master_slave_count
+ - the number of slaves found
+w1_master_slaves - the names of the slaves, one per line
+w1_master_timeout - the delay in seconds between searches
+
+If you have a w1 bus that never changes (you don't add or remove devices),
+you can set w1_master_search to a positive value to disable searches.
+
+
+w1 slave sysfs interface
+------------------------------------------------------------------
+bus - (standard) symlink to the w1 bus
+driver - (standard) symlink to the w1 driver
+name - the device name, usually the same as the directory name
+w1_slave - (optional) a binary file whose meaning depends on the
+ family driver
+
diff --git a/trunk/Documentation/x86_64/boot-options.txt b/trunk/Documentation/x86_64/boot-options.txt
index b9e6be00cadf..476c0c22fbb7 100644
--- a/trunk/Documentation/x86_64/boot-options.txt
+++ b/trunk/Documentation/x86_64/boot-options.txt
@@ -47,7 +47,7 @@ Timing
notsc
Don't use the CPU time stamp counter to read the wall time.
This can be used to work around timing problems on multiprocessor systems
- with not properly synchronized CPUs. Only useful with a SMP kernel
+ with not properly synchronized CPUs.
report_lost_ticks
Report when timer interrupts are lost because some code turned off
@@ -74,6 +74,9 @@ Idle loop
event. This will make the CPUs eat a lot more power, but may be useful
to get slightly better performance in multiprocessor benchmarks. It also
makes some profiling using performance counters more accurate.
+ Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
+ CPUs) this option has no performance advantage over the normal idle loop.
+ It may also interact badly with hyperthreading.
Rebooting
@@ -178,6 +181,5 @@ Debugging
Misc
noreplacement Don't replace instructions with more appropiate ones
- for the CPU. This may be useful on asymmetric MP systems
- where some CPU have less capabilities than the others.
-
+ for the CPU. This may be useful on asymmetric MP systems
+ where some CPU have less capabilities than the others.
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
index 86ba94f16e83..c31ddc4bcdd6 100644
--- a/trunk/MAINTAINERS
+++ b/trunk/MAINTAINERS
@@ -194,7 +194,7 @@ S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
ADT746X FAN DRIVER
@@ -242,7 +242,7 @@ S: Maintained
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@sh.cvut.cz
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
ALPHA PORT
@@ -265,6 +265,11 @@ P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br
S: Maintained
+ARC FRAMEBUFFER DRIVER
+P: Jaya Kumar
+M: jayalk@intworks.biz
+S: Maintained
+
ARM26 ARCHITECTURE
P: Ian Molton
M: spyro@f2s.com
@@ -299,7 +304,7 @@ S: Maintained
ARM/PT DIGITAL BOARD PORT
P: Stefan Eletzhofer
M: stefan.eletzhofer@eletztrick.de
-L: linux-arm-kernel@lists.arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
@@ -312,21 +317,21 @@ S: Maintained
ARM/STRONGARM110 PORT
P: Russell King
M: rmk@arm.linux.org.uk
-L: linux-arm-kernel@lists.arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
ARM/S3C2410 ARM ARCHITECTURE
P: Ben Dooks
M: ben-s3c2410@fluff.org
-L: linux-arm-kernel@lists.arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
ARM/S3C2440 ARM ARCHITECTURE
P: Ben Dooks
M: ben-s3c2440@fluff.org
-L: linux-arm-kernel@lists.arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
@@ -365,6 +370,10 @@ W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
S: Maintained
+AUDIT SUBSYSTEM
+L: linux-audit@redhat.com (subscribers-only)
+S: Maintained
+
AX.25 NETWORK LAYER
P: Ralf Baechle
M: ralf@linux-mips.org
@@ -499,12 +508,19 @@ L: bonding-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/bonding/
S: Supported
+BROADBAND PROCESSOR ARCHITECTURE
+P: Arnd Bergmann
+M: arnd@arndb.de
+L: linuxppc64-dev@ozlabs.org
+W: http://linuxppc64.org
+S: Supported
+
BTTV VIDEO4LINUX DRIVER
-P: Gerd Knorr
-M: kraxel@bytesex.org
+P: Mauro Carvalho Chehab
+M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
-W: http://bytesex.org/bttv/
-S: Orphan
+W: http://linuxtv.org
+S: Maintained
BUSLOGIC SCSI DRIVER
P: Leonard N. Zubkoff
@@ -564,10 +580,9 @@ S: Supported
COMPUTONE INTELLIPORT MULTIPORT CARD
P: Michael H. Warfield
-M: Michael H. Warfield
+M: mhw@wittsend.com
W: http://www.wittsend.com/computone.html
-L: linux-computone@lazuli.wittsend.com
-S: Orphaned
+S: Maintained
COSA/SRP SYNC SERIAL DRIVER
P: Jan "Yenya" Kasprzak
@@ -736,6 +751,11 @@ M: tori@unhappy.mine.nu
L: linux-kernel@vger.kernel.org
S: Maintained
+DOCBOOK FOR DOCUMENTATION
+P: Martin Waitz
+M: tali@admingilde.org
+S: Maintained
+
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
@@ -992,7 +1012,7 @@ P: Greg Kroah-Hartman
M: greg@kroah.com
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.nu/
S: Maintained
@@ -1133,7 +1153,7 @@ S: Maintained
INFINIBAND SUBSYSTEM
P: Roland Dreier
-M: roland@topspin.com
+M: rolandd@cisco.com
P: Sean Hefty
M: mshefty@ichips.intel.com
P: Hal Rosenstock
@@ -1149,6 +1169,12 @@ L: linux-input@atrey.karlin.mff.cuni.cz
L: linux-joystick@atrey.karlin.mff.cuni.cz
S: Maintained
+INOTIFY
+P: John McCutchan and Robert Love
+M: ttb@tentacle.dhs.org and rml@novell.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
INTEL 810/815 FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@pol.net
@@ -1220,7 +1246,7 @@ S: Maintained
IRDA SUBSYSTEM
P: Jean Tourrilhes
-L: irda-users@lists.sourceforge.net
+L: irda-users@lists.sourceforge.net (subscribers-only)
W: http://irda.sourceforge.net/
S: Maintained
@@ -1313,6 +1339,16 @@ M: rml@novell.com
L: linux-kernel@vger.kernel.org
S: Maintained
+KEXEC
+P: Eric Biederman
+P: Randy Dunlap
+M: ebiederm@xmission.com
+M: rddunlap@osdl.org
+W: http://www.xmission.com/~ebiederm/files/kexec/
+L: linux-kernel@vger.kernel.org
+L: fastboot@osdl.org
+S: Maintained
+
LANMEDIA WAN CARD DRIVER
P: Andrew Stanley-Jones
M: asj@lanmedia.com
@@ -1380,13 +1416,20 @@ W: http://www.penguinppc.org/
L: linuxppc-embedded@ozlabs.org
S: Maintained
-LINUX FOR POWERPC EMBEDDED PPC8XX AND BOOT CODE
+LINUX FOR POWERPC BOOT CODE
P: Tom Rini
M: trini@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-embedded@ozlabs.org
S: Maintained
+LINUX FOR POWERPC EMBEDDED PPC8XX
+P: Marcelo Tosatti
+M: marcelo.tosatti@cyclades.com
+W: http://www.penguinppc.org/
+L: linuxppc-embedded@ozlabs.org
+S: Maintained
+
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
P: Kumar Gala
M: kumar.gala@freescale.com
@@ -1420,13 +1463,13 @@ S: Supported
LM83 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
LM90 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP Dynamic Disks)
@@ -1478,6 +1521,12 @@ P: Zach Brown
M: zab@zabbo.net
S: Odd Fixes
+MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
+P: Michael Kerrisk
+M: mtk-manpages@gmx.net
+W: ftp://ftp.kernel.org/pub/linux/docs/manpages
+S: Maintained
+
MARVELL MV64340 ETHERNET DRIVER
P: Manish Lachwani
M: Manish_Lachwani@pmc-sierra.com
@@ -1777,8 +1826,9 @@ M: greg@kroah.com
S: Maintained
PCMCIA SUBSYSTEM
+P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
-S: Unmaintained
+S: Maintained
PCNET32 NETWORK DRIVER
P: Thomas Bogendörfer
@@ -1843,7 +1893,7 @@ S: Maintained
PXA2xx SUPPORT
P: Nicolas Pitre
M: nico@cam.org
-L: linux-arm-kernel@lists.arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
QLOGIC QLA2XXX FC-SCSI DRIVER
@@ -2065,7 +2115,7 @@ S: Maintained
SMSC47M1 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Odd Fixes
SMB FILESYSTEM
@@ -2098,9 +2148,7 @@ S: Maintained
SOFTWARE SUSPEND:
P: Pavel Machek
M: pavel@suse.cz
-M: pavel@ucw.cz
-L: http://lister.fornax.hu/mailman/listinfo/swsusp
-W: http://swsusp.sf.net/
+L: linux-pm@osdl.org
S: Maintained
SONIC NETWORK DRIVER
@@ -2128,11 +2176,16 @@ W: http://tpmdd.sourceforge.net
L: tpmdd-devel@lists.sourceforge.net
S: Maintained
+TENSILICA XTENSA PORT (xtensa):
+P: Chris Zankel
+M: chris@zankel.net
+S: Maintained
+
UltraSPARC (sparc64):
P: David S. Miller
M: davem@davemloft.net
P: Eddie C. Dost
-M: ecd@skynet.be
+M: ecd@brainaid.de
P: Jakub Jelinek
M: jj@sunsite.ms.mff.cuni.cz
P: Anton Blanchard
@@ -2145,7 +2198,7 @@ SHARP LH SUPPORT (LH7952X & LH7A40X)
P: Marc Singer
M: elf@buici.com
W: http://projects.buici.com/arm
-L: linux-arm-kernel@lists.arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
SPARC (sparc32):
@@ -2386,6 +2439,12 @@ L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
S: Maintained
+USB OPTION-CARD DRIVER
+P: Matthias Urlichs
+M: smurf@smurf.noris.de
+L: linux-usb-devel@lists.sourceforge.net
+S: Maintained
+
USB OV511 DRIVER
P: Mark McClelland
M: mmcclell@bigfoot.com
@@ -2572,7 +2631,7 @@ M: davidm@snapgear.com
P: D. Jeff Dionne (created first uClinux port)
M: jeff@uclinux.org
W: http://www.uclinux.org/
-L: uclinux-dev@uclinux.org
+L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
UCLINUX FOR NEC V850
@@ -2596,15 +2655,16 @@ W: http://rio500.sourceforge.net
S: Maintained
VIDEO FOR LINUX
-P: Gerd Knorr
-M: kraxel@bytesex.org
+P: Mauro Carvalho Chehab
+M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
-S: Orphan
+W: http://linuxtv.org
+S: Maintained
W1 DALLAS'S 1-WIRE BUS
P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
W83L51xD SD/MMC CARD INTERFACE DRIVER
@@ -2617,7 +2677,7 @@ S: Maintained
W83L785TS HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Odd Fixes
WAN ROUTER & SANGOMA WANPIPE DRIVERS & API (X.25, FRAME RELAY, PPP, CISCO HDLC)
diff --git a/trunk/Makefile b/trunk/Makefile
index 0d1e74d50067..0196b209bb19 100644
--- a/trunk/Makefile
+++ b/trunk/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 12
-EXTRAVERSION =
+SUBLEVEL = 13
+EXTRAVERSION =-rc5
NAME=Woozy Numbat
# *DOCUMENTATION*
@@ -281,7 +281,7 @@ export quiet Q KBUILD_VERBOSE
# See documentation in Documentation/kbuild/makefiles.txt
# cc-option
-# Usage: cflags-y += $(call gcc-option, -march=winchip-c6, -march=i586)
+# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
> /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
@@ -518,7 +518,7 @@ CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops)
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps)
ifdef CONFIG_FRAME_POINTER
-CFLAGS += -fno-omit-frame-pointer
+CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
else
CFLAGS += -fomit-frame-pointer
endif
@@ -792,6 +792,9 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
$(Q)$(MAKE) $(build)=$(@D) $@
%.o: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
+%.ko: scripts FORCE
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o)
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
%/: scripts prepare FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
%.lst: %.c scripts FORCE
@@ -1033,6 +1036,7 @@ help:
@echo ' modules_install - Install all modules'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
+ @echo ' dir/file.ko - Build module including final link'
@echo ' rpm - Build a kernel as an RPM package'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@@ -1149,7 +1153,7 @@ endif # KBUILD_EXTMOD
#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
#Adding $(srctree) adds about 20M on i386 to the size of the output file!
-ifeq ($(KBUILD_OUTPUT),)
+ifeq ($(src),$(obj))
__srctree =
else
__srctree = $(srctree)/
diff --git a/trunk/README b/trunk/README
index 0df20f07227b..76dd780d88ed 100644
--- a/trunk/README
+++ b/trunk/README
@@ -87,6 +87,16 @@ INSTALLING the kernel:
kernel source. Patches are applied from the current directory, but
an alternative directory can be specified as the second argument.
+ - If you are upgrading between releases using the stable series patches
+ (for example, patch-2.6.xx.y), note that these "dot-releases" are
+ not incremental and must be applied to the 2.6.xx base tree. For
+ example, if your base kernel is 2.6.12 and you want to apply the
+ 2.6.12.3 patch, you do not and indeed must not first apply the
+ 2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel
+ version 2.6.12.2 and want to jump to 2.6.12.3, you must first
+ reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
+ the 2.6.12.3 patch.
+
- Make sure you have no stale .o files and dependencies lying around:
cd linux
diff --git a/trunk/arch/alpha/Kconfig b/trunk/arch/alpha/Kconfig
index f7c96635d3b4..083c5df42d35 100644
--- a/trunk/arch/alpha/Kconfig
+++ b/trunk/arch/alpha/Kconfig
@@ -509,7 +509,7 @@ config NR_CPUS
depends on SMP
default "64"
-config DISCONTIGMEM
+config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous Memory Support (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
@@ -518,6 +518,8 @@ config DISCONTIGMEM
or have huge holes in the physical address space for other reasons.
See for more.
+source "mm/Kconfig"
+
config NUMA
bool "NUMA Support (EXPERIMENTAL)"
depends on DISCONTIGMEM
@@ -594,6 +596,8 @@ source "fs/Kconfig.binfmt"
endmenu
+source "net/Kconfig"
+
source "drivers/Kconfig"
source "fs/Kconfig"
diff --git a/trunk/arch/alpha/defconfig b/trunk/arch/alpha/defconfig
index 5e39b7a7c8f4..6da9c3dbde44 100644
--- a/trunk/arch/alpha/defconfig
+++ b/trunk/arch/alpha/defconfig
@@ -96,7 +96,7 @@ CONFIG_ALPHA_CORE_AGP=y
CONFIG_ALPHA_BROKEN_IRQ_MASK=y
CONFIG_EISA=y
# CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_VERBOSE_MCHECK=y
CONFIG_VERBOSE_MCHECK_ON=1
CONFIG_PCI_LEGACY_PROC=y
diff --git a/trunk/arch/alpha/kernel/irq_alpha.c b/trunk/arch/alpha/kernel/irq_alpha.c
index e6ded33c6e22..9d34ce26e5ef 100644
--- a/trunk/arch/alpha/kernel/irq_alpha.c
+++ b/trunk/arch/alpha/kernel/irq_alpha.c
@@ -55,6 +55,8 @@ do_entInt(unsigned long type, unsigned long vector,
#ifdef CONFIG_SMP
{
long cpu;
+
+ local_irq_disable();
smp_percpu_timer_interrupt(regs);
cpu = smp_processor_id();
if (cpu != boot_cpuid) {
diff --git a/trunk/arch/alpha/kernel/process.c b/trunk/arch/alpha/kernel/process.c
index 4933f3ce5833..fa98dae3cd98 100644
--- a/trunk/arch/alpha/kernel/process.c
+++ b/trunk/arch/alpha/kernel/process.c
@@ -165,7 +165,6 @@ machine_restart(char *restart_cmd)
common_shutdown(LINUX_REBOOT_CMD_RESTART, restart_cmd);
}
-EXPORT_SYMBOL(machine_restart);
void
machine_halt(void)
@@ -173,7 +172,6 @@ machine_halt(void)
common_shutdown(LINUX_REBOOT_CMD_HALT, NULL);
}
-EXPORT_SYMBOL(machine_halt);
void
machine_power_off(void)
@@ -181,7 +179,6 @@ machine_power_off(void)
common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
}
-EXPORT_SYMBOL(machine_power_off);
/* Used by sysrq-p, among others. I don't believe r9-r15 are ever
saved in the context it's used. */
diff --git a/trunk/arch/alpha/kernel/systbls.S b/trunk/arch/alpha/kernel/systbls.S
index 052120882876..4342cea1a926 100644
--- a/trunk/arch/alpha/kernel/systbls.S
+++ b/trunk/arch/alpha/kernel/systbls.S
@@ -461,6 +461,11 @@ sys_call_table:
.quad sys_add_key
.quad sys_request_key /* 440 */
.quad sys_keyctl
+ .quad sys_ioprio_set
+ .quad sys_ioprio_get
+ .quad sys_inotify_init
+ .quad sys_inotify_add_watch /* 445 */
+ .quad sys_inotify_rm_watch
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object
diff --git a/trunk/arch/alpha/kernel/traps.c b/trunk/arch/alpha/kernel/traps.c
index fd7bd17cc960..6f509a644bdd 100644
--- a/trunk/arch/alpha/kernel/traps.c
+++ b/trunk/arch/alpha/kernel/traps.c
@@ -240,7 +240,7 @@ do_entIF(unsigned long type, struct pt_regs *regs)
siginfo_t info;
int signo, code;
- if (regs->ps == 0) {
+ if ((regs->ps & ~IPL_MAX) == 0) {
if (type == 1) {
const unsigned int *data
= (const unsigned int *) regs->pc;
diff --git a/trunk/arch/alpha/mm/numa.c b/trunk/arch/alpha/mm/numa.c
index ba81c4422aaf..c7481d59b6df 100644
--- a/trunk/arch/alpha/mm/numa.c
+++ b/trunk/arch/alpha/mm/numa.c
@@ -327,8 +327,6 @@ void __init mem_init(void)
extern char _text, _etext, _data, _edata;
extern char __init_begin, __init_end;
unsigned long nid, i;
- struct page * lmem_map;
-
high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
reservedpages = 0;
@@ -338,10 +336,10 @@ void __init mem_init(void)
*/
totalram_pages += free_all_bootmem_node(NODE_DATA(nid));
- lmem_map = node_mem_map(nid);
pfn = NODE_DATA(nid)->node_start_pfn;
for (i = 0; i < node_spanned_pages(nid); i++, pfn++)
- if (page_is_ram(pfn) && PageReserved(lmem_map+i))
+ if (page_is_ram(pfn) &&
+ PageReserved(nid_page_nr(nid, i)))
reservedpages++;
}
@@ -373,18 +371,18 @@ show_mem(void)
show_free_areas();
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_node(nid) {
- struct page * lmem_map = node_mem_map(nid);
i = node_spanned_pages(nid);
while (i-- > 0) {
+ struct page *page = nid_page_nr(nid, i);
total++;
- if (PageReserved(lmem_map+i))
+ if (PageReserved(page))
reserved++;
- else if (PageSwapCache(lmem_map+i))
+ else if (PageSwapCache(page))
cached++;
- else if (!page_count(lmem_map+i))
+ else if (!page_count(page))
free++;
else
- shared += page_count(lmem_map + i) - 1;
+ shared += page_count(page) - 1;
}
}
printk("%ld pages of RAM\n",total);
diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
index 475950c8a831..7bc4a583f4e1 100644
--- a/trunk/arch/arm/Kconfig
+++ b/trunk/arch/arm/Kconfig
@@ -67,10 +67,6 @@ config GENERIC_BUST_SPINLOCK
config GENERIC_ISA_DMA
bool
-config GENERIC_IOMAP
- bool
- default y
-
config FIQ
bool
@@ -161,7 +157,7 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
select ISA
- select DISCONTIGMEM
+ select ARCH_DISCONTIGMEM_ENABLE
config ARCH_S3C2410
bool "Samsung S3C2410"
@@ -202,6 +198,11 @@ config ARCH_H720X
help
This enables support for systems based on the Hynix HMS720x
+config ARCH_AAEC2000
+ bool "Agilent AAEC-2000 based"
+ help
+ This enables support for systems based on the Agilent AAEC-2000
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -222,7 +223,9 @@ source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
-source "arch/arm/mach-omap/Kconfig"
+source "arch/arm/plat-omap/Kconfig"
+
+source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
@@ -234,6 +237,8 @@ source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
+source "arch/arm/mach-aaec2000/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -277,7 +282,7 @@ config ISA_DMA_API
default y
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -343,7 +348,27 @@ config PREEMPT
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
-config DISCONTIGMEM
+config NO_IDLE_HZ
+ bool "Dynamic tick timer"
+ help
+ Select this option if you want to disable continuous timer ticks
+ and have them programmed to occur as required. This option saves
+ power as the system can remain in idle state for longer.
+
+ By default dynamic tick is disabled during the boot, and can be
+ manually enabled with:
+
+ echo 1 > /sys/devices/system/timer/timer0/dyn_tick
+
+ Alternatively, if you want dynamic tick automatically enabled
+ during boot, pass "dyntick=enable" via the kernel command string.
+
+ Please note that dynamic tick may affect the accuracy of
+ timekeeping on some platforms depending on the implementation.
+ Currently at least OMAP platform is known to have accurate
+ timekeeping with dynamic tick.
+
+config ARCH_DISCONTIGMEM_ENABLE
bool
default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
help
@@ -352,6 +377,8 @@ config DISCONTIGMEM
or have huge holes in the physical address space for other reasons.
See for more.
+source "mm/Kconfig"
+
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
@@ -489,7 +516,7 @@ config XIP_PHYS_ADDR
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
menu "CPU Frequency scaling"
@@ -673,6 +700,8 @@ config APM
endmenu
+source "net/Kconfig"
+
menu "Device Drivers"
source "drivers/base/Kconfig"
@@ -705,7 +734,7 @@ source "drivers/ieee1394/Kconfig"
source "drivers/message/i2o/Kconfig"
-source "net/Kconfig"
+source "drivers/net/Kconfig"
source "drivers/isdn/Kconfig"
@@ -717,6 +746,8 @@ source "drivers/char/Kconfig"
source "drivers/i2c/Kconfig"
+source "drivers/hwmon/Kconfig"
+
#source "drivers/l3/Kconfig"
source "drivers/misc/Kconfig"
diff --git a/trunk/arch/arm/Makefile b/trunk/arch/arm/Makefile
index 2277e3d179cc..67f1453ade05 100644
--- a/trunk/arch/arm/Makefile
+++ b/trunk/arch/arm/Makefile
@@ -56,7 +56,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110)
tune-$(CONFIG_CPU_V6) :=-mtune=strongarm
# Need -Uarm for gcc < 3.x
-CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
@@ -91,12 +91,14 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
- machine-$(CONFIG_ARCH_OMAP) := omap
+ machine-$(CONFIG_ARCH_OMAP1) := omap1
+ incdir-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x
+ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
@@ -141,6 +143,9 @@ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
+# If we have a common platform directory, then include it in the build.
+core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/
+
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/
diff --git a/trunk/arch/arm/boot/compressed/head-shark.S b/trunk/arch/arm/boot/compressed/head-shark.S
index 848f60e5429b..089c560e07f1 100644
--- a/trunk/arch/arm/boot/compressed/head-shark.S
+++ b/trunk/arch/arm/boot/compressed/head-shark.S
@@ -63,8 +63,8 @@ __beginning: mov r4, r0 @ save the entry to the firmware
mov pc, r2
-__copy_target: .long 0x08508000
-__copy_end: .long 0x08608000
+__copy_target: .long 0x08507FFC
+__copy_end: .long 0x08607FFC
.word _start
.word __bss_start
@@ -73,9 +73,10 @@ __copy_end: .long 0x08608000
__temp_stack: .space 128
__mmu_off:
- adr r0, __ofw_data
+ adr r0, __ofw_data @ read the 1. entry of the memory map
ldr r0, [r0, #4]
orr r0, r0, #0x00600000
+ sub r0, r0, #4
ldr r1, __copy_end
ldr r3, __copy_target
@@ -89,20 +90,43 @@ __mmu_off:
* from 0x08500000 to 0x08508000 if we have only 8MB
*/
+/* As we get more 2.6-kernels it gets more and more
+ * uncomfortable to be bound to kernel images of 1MB only.
+ * So we add a loop here, to be able to copy some more.
+ * Alexander Schulz 2005-07-17
+ */
+
+ mov r4, #3 @ How many megabytes to copy
+
+
+__MoveCode: sub r4, r4, #1
__Copy: ldr r2, [r0], #-4
str r2, [r1], #-4
teq r1, r3
bne __Copy
+
+ /* The firmware maps us in blocks of 1 MB, the next block is
+ _below_ the last one. So our decrementing source pointer
+ ist right here, but the destination pointer must be increased
+ by 2 MB */
+ add r1, r1, #0x00200000
+ add r3, r3, #0x00100000
+
+ teq r4, #0
+ bne __MoveCode
+
+
/* and jump to it */
- adr r2, __go_on
- adr r0, __ofw_data
+ adr r2, __go_on @ where we want to jump
+ adr r0, __ofw_data @ read the 1. entry of the memory map
ldr r0, [r0, #4]
- sub r2, r2, r0
- sub r2, r2, #0x00500000
- ldr r0, __copy_target
+ sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00)
+ sub r2, r2, #0x00500000 @ -0050
+ ldr r0, __copy_target @ and add 0850 8000 instead
+ add r0, r0, #4
add r2, r2, r0
- mov pc, r2
+ mov pc, r2 @ and jump there
__go_on:
adr sp, __temp_stack
diff --git a/trunk/arch/arm/boot/install.sh b/trunk/arch/arm/boot/install.sh
index 935bb27369e9..9f9bed207345 100644
--- a/trunk/arch/arm/boot/install.sh
+++ b/trunk/arch/arm/boot/install.sh
@@ -21,8 +21,8 @@
#
# User may have a custom install script
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
if [ "$(basename $2)" = "zImage" ]; then
# Compressed install
diff --git a/trunk/arch/arm/common/amba.c b/trunk/arch/arm/common/amba.c
index a0507f8c33fe..c6beb751f2a9 100644
--- a/trunk/arch/arm/common/amba.c
+++ b/trunk/arch/arm/common/amba.c
@@ -169,7 +169,7 @@ static void amba_device_release(struct device *dev)
}
#define amba_attr(name,fmt,arg...) \
-static ssize_t show_##name(struct device *_dev, char *buf) \
+static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \
{ \
struct amba_device *dev = to_amba_device(_dev); \
return sprintf(buf, fmt, arg); \
diff --git a/trunk/arch/arm/common/dmabounce.c b/trunk/arch/arm/common/dmabounce.c
index 5797b1b100a1..cbf2165476b0 100644
--- a/trunk/arch/arm/common/dmabounce.c
+++ b/trunk/arch/arm/common/dmabounce.c
@@ -30,6 +30,8 @@
#include
#include
+#include
+
#undef DEBUG
#undef STATS
@@ -91,15 +93,12 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info)
static inline struct dmabounce_device_info *
find_dmabounce_dev(struct device *dev)
{
- struct list_head *entry;
-
- list_for_each(entry, &dmabounce_devs) {
- struct dmabounce_device_info *d =
- list_entry(entry, struct dmabounce_device_info, node);
+ struct dmabounce_device_info *d;
+ list_for_each_entry(d, &dmabounce_devs, node)
if (d->dev == dev)
return d;
- }
+
return NULL;
}
@@ -170,15 +169,11 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
static inline struct safe_buffer *
find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
{
- struct list_head *entry;
-
- list_for_each(entry, &device_info->safe_buffers) {
- struct safe_buffer *b =
- list_entry(entry, struct safe_buffer, node);
+ struct safe_buffer *b;
+ list_for_each_entry(b, &device_info->safe_buffers, node)
if (b->safe_dma_addr == safe_dma_addr)
return b;
- }
return NULL;
}
@@ -299,15 +294,26 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
buf->safe, (void *) buf->safe_dma_addr);
-
DO_STATS ( device_info->bounce_count++ );
- if ((dir == DMA_FROM_DEVICE) ||
- (dir == DMA_BIDIRECTIONAL)) {
+ if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
+ unsigned long ptr;
+
dev_dbg(dev,
"%s: copy back safe %p to unsafe %p size %d\n",
__func__, buf->safe, buf->ptr, size);
memcpy(buf->ptr, buf->safe, size);
+
+ /*
+ * DMA buffers must have the same cache properties
+ * as if they were really used for DMA - which means
+ * data must be written back to RAM. Note that
+ * we don't use dmac_flush_range() here for the
+ * bidirectional case because we know the cache
+ * lines will be coherent with the data written.
+ */
+ ptr = (unsigned long)buf->ptr;
+ dmac_clean_range(ptr, ptr + size);
}
free_safe_buffer(device_info, buf);
}
diff --git a/trunk/arch/arm/common/sa1111.c b/trunk/arch/arm/common/sa1111.c
index 21fce3414ed1..38c2eb667eb9 100644
--- a/trunk/arch/arm/common/sa1111.c
+++ b/trunk/arch/arm/common/sa1111.c
@@ -721,16 +721,17 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
return ret;
}
+static int sa1111_remove_one(struct device *dev, void *data)
+{
+ device_unregister(dev);
+ return 0;
+}
+
static void __sa1111_remove(struct sa1111 *sachip)
{
- struct list_head *l, *n;
void __iomem *irqbase = sachip->base + SA1111_INTC;
- list_for_each_safe(l, n, &sachip->dev->children) {
- struct device *d = list_to_dev(l);
-
- device_unregister(d);
- }
+ device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
/* disable all IRQs */
sa1111_writel(0, irqbase + SA1111_INTEN0);
diff --git a/trunk/arch/arm/common/sharpsl_param.c b/trunk/arch/arm/common/sharpsl_param.c
index c2c557a224c2..c94864c5b1af 100644
--- a/trunk/arch/arm/common/sharpsl_param.c
+++ b/trunk/arch/arm/common/sharpsl_param.c
@@ -22,7 +22,7 @@
* them early in the boot process, then pass them to the appropriate drivers.
* Not all devices use all paramaters but the format is common to all.
*/
-#ifdef ARCH_SA1100
+#ifdef CONFIG_ARCH_SA1100
#define PARAM_BASE 0xe8ffc000
#else
#define PARAM_BASE 0xa0000a00
diff --git a/trunk/arch/arm/configs/bast_defconfig b/trunk/arch/arm/configs/bast_defconfig
index 2d985e9611cd..35e3a99bcbb6 100644
--- a/trunk/arch/arm/configs/bast_defconfig
+++ b/trunk/arch/arm/configs/bast_defconfig
@@ -561,7 +561,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
CONFIG_SERIAL_S3C2410=y
CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
diff --git a/trunk/arch/arm/configs/enp2611_defconfig b/trunk/arch/arm/configs/enp2611_defconfig
index e8f9fccffe84..f67ca01b4982 100644
--- a/trunk/arch/arm/configs/enp2611_defconfig
+++ b/trunk/arch/arm/configs/enp2611_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:08:24 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul 7 16:41:21 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
@@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@@ -90,6 +99,7 @@ CONFIG_ARCH_ENP2611=y
# CONFIG_ARCH_IXDP2800 is not set
# CONFIG_ARCH_IXDP2401 is not set
# CONFIG_ARCH_IXDP2801 is not set
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
@@ -100,7 +110,6 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -112,9 +121,11 @@ CONFIG_XSCALE_PMU=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -124,7 +135,16 @@ CONFIG_PCI_NAMES=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -263,7 +283,6 @@ CONFIG_MTD_IXP2000=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -302,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -323,12 +343,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -343,6 +363,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -398,6 +420,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -434,9 +457,11 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -458,6 +483,7 @@ CONFIG_EEPRO100=y
# Wan interfaces
#
CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
@@ -520,7 +546,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -541,6 +566,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -607,17 +633,18 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_IXP2000 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
@@ -631,7 +658,9 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -647,6 +676,7 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -656,14 +686,19 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -717,6 +752,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -757,7 +793,6 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
@@ -795,12 +830,14 @@ CONFIG_JFFS2_RTIME=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
diff --git a/trunk/arch/arm/configs/ixdp2400_defconfig b/trunk/arch/arm/configs/ixdp2400_defconfig
index 4fd663ecbe39..5c6c928215d0 100644
--- a/trunk/arch/arm/configs/ixdp2400_defconfig
+++ b/trunk/arch/arm/configs/ixdp2400_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:13:38 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul 7 16:49:01 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
@@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@@ -91,6 +100,7 @@ CONFIG_ARCH_IXDP2400=y
CONFIG_ARCH_IXDP2X00=y
# CONFIG_ARCH_IXDP2401 is not set
# CONFIG_ARCH_IXDP2801 is not set
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
@@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -125,7 +136,16 @@ CONFIG_PCI_NAMES=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -264,7 +284,6 @@ CONFIG_MTD_IXP2000=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -303,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -324,12 +344,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -344,6 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -399,6 +421,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -435,9 +458,11 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -459,6 +484,7 @@ CONFIG_EEPRO100=y
# Wan interfaces
#
CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
@@ -521,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -542,6 +567,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -608,17 +634,18 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_IXP2000 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
@@ -632,7 +659,9 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -648,6 +677,7 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -657,14 +687,19 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -718,6 +753,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -758,7 +794,6 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
@@ -796,12 +831,14 @@ CONFIG_JFFS2_RTIME=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
diff --git a/trunk/arch/arm/configs/ixdp2401_defconfig b/trunk/arch/arm/configs/ixdp2401_defconfig
index 6f51c98084a3..6dc40f6be0ef 100644
--- a/trunk/arch/arm/configs/ixdp2401_defconfig
+++ b/trunk/arch/arm/configs/ixdp2401_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:53:55 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul 7 16:49:08 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
@@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@@ -91,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARCH_IXDP2401=y
# CONFIG_ARCH_IXDP2801 is not set
CONFIG_ARCH_IXDP2X01=y
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
@@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -125,7 +136,16 @@ CONFIG_PCI_NAMES=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -264,7 +284,6 @@ CONFIG_MTD_IXP2000=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -303,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -324,12 +344,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -344,6 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -399,6 +421,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -436,9 +459,11 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -460,6 +485,7 @@ CONFIG_EEPRO100=y
# Wan interfaces
#
CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
@@ -522,7 +548,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -543,6 +568,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -609,17 +635,18 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_IXP2000 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
@@ -633,7 +660,9 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -649,6 +678,7 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -658,14 +688,19 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -719,6 +754,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -759,7 +795,6 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
@@ -797,12 +832,14 @@ CONFIG_JFFS2_RTIME=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
diff --git a/trunk/arch/arm/configs/ixdp2800_defconfig b/trunk/arch/arm/configs/ixdp2800_defconfig
index 7be3521f91fc..d2bb0b7153fe 100644
--- a/trunk/arch/arm/configs/ixdp2800_defconfig
+++ b/trunk/arch/arm/configs/ixdp2800_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:15:23 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul 7 16:49:20 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
@@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@@ -91,6 +100,7 @@ CONFIG_ARCH_IXDP2800=y
CONFIG_ARCH_IXDP2X00=y
# CONFIG_ARCH_IXDP2401 is not set
# CONFIG_ARCH_IXDP2801 is not set
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
@@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -125,7 +136,16 @@ CONFIG_PCI_NAMES=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -264,7 +284,6 @@ CONFIG_MTD_IXP2000=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -303,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -324,12 +344,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -344,6 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -399,6 +421,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -435,9 +458,11 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -459,6 +484,7 @@ CONFIG_EEPRO100=y
# Wan interfaces
#
CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
@@ -521,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -542,6 +567,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -608,17 +634,18 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_IXP2000 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
@@ -632,7 +659,9 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -648,6 +677,7 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -657,14 +687,19 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -718,6 +753,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -758,7 +794,6 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
@@ -796,12 +831,14 @@ CONFIG_JFFS2_RTIME=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
diff --git a/trunk/arch/arm/configs/ixdp2801_defconfig b/trunk/arch/arm/configs/ixdp2801_defconfig
index cd84a20f30f1..2d6f960e3395 100644
--- a/trunk/arch/arm/configs/ixdp2801_defconfig
+++ b/trunk/arch/arm/configs/ixdp2801_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:39:19 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul 7 16:49:13 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
@@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@@ -91,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
# CONFIG_ARCH_IXDP2401 is not set
CONFIG_ARCH_IXDP2801=y
CONFIG_ARCH_IXDP2X01=y
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
@@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -125,7 +136,16 @@ CONFIG_PCI_NAMES=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -264,7 +284,6 @@ CONFIG_MTD_IXP2000=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -303,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -324,12 +344,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -344,6 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -399,6 +421,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -436,9 +459,11 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -460,6 +485,7 @@ CONFIG_EEPRO100=y
# Wan interfaces
#
CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
@@ -522,7 +548,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -543,6 +568,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -609,17 +635,18 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_IXP2000 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
@@ -633,7 +660,9 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -649,6 +678,7 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -658,14 +688,19 @@ CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -719,6 +754,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -759,7 +795,6 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
@@ -797,12 +832,14 @@ CONFIG_JFFS2_RTIME=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
diff --git a/trunk/arch/arm/configs/omap_h2_1610_defconfig b/trunk/arch/arm/configs/omap_h2_1610_defconfig
index 4e58d9341bce..24955263b096 100644
--- a/trunk/arch/arm/configs/omap_h2_1610_defconfig
+++ b/trunk/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 17:52:41 2005
+# Linux kernel version: 2.6.13-rc2
+# Fri Jul 8 04:49:34 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -33,8 +33,9 @@ CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -82,10 +83,28 @@ CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
#
# TI OMAP Implementations
#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
#
# OMAP Core Type
@@ -93,7 +112,6 @@ CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP1510 is not set
CONFIG_ARCH_OMAP16XX=y
-CONFIG_ARCH_OMAP_OTG=y
#
# OMAP Board Type
@@ -101,21 +119,14 @@ CONFIG_ARCH_OMAP_OTG=y
# CONFIG_MACH_OMAP_INNOVATOR is not set
CONFIG_MACH_OMAP_H2=y
# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_H4 is not set
# CONFIG_MACH_OMAP_OSK is not set
# CONFIG_MACH_OMAP_GENERIC is not set
#
-# OMAP Feature Selections
+# OMAP CPU Speed
#
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
CONFIG_OMAP_ARM_192MHZ=y
# CONFIG_OMAP_ARM_168MHZ is not set
# CONFIG_OMAP_ARM_120MHZ is not set
@@ -145,6 +156,7 @@ CONFIG_ARM_THUMB=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -154,7 +166,16 @@ CONFIG_ARM_THUMB=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
@@ -166,6 +187,22 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
# CONFIG_XIP_KERNEL is not set
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
#
# Floating point emulation
#
@@ -202,7 +239,6 @@ CONFIG_PM=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
#
# Memory Technology Devices (MTD)
@@ -292,7 +328,6 @@ CONFIG_MTD_CFI_UTIL=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -327,6 +362,7 @@ CONFIG_SCSI_PROC_FS=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -356,6 +392,7 @@ CONFIG_SCSI_PROC_FS=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -375,12 +412,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -395,6 +432,8 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -442,6 +481,7 @@ CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -518,7 +558,6 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -567,13 +606,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -604,7 +641,9 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@@ -620,6 +659,7 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -627,15 +667,21 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
CONFIG_ISP1301_OMAP=y
+CONFIG_TPS65010=y
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -663,8 +709,10 @@ CONFIG_FB=y
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -677,11 +725,13 @@ CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
@@ -729,14 +779,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_OMAP=y
CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
@@ -755,6 +805,7 @@ CONFIG_USB_ETH_RNDIS=y
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
@@ -791,7 +842,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
@@ -828,12 +878,14 @@ CONFIG_CRAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -903,24 +955,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_USER is not set
#
# Security options
diff --git a/trunk/arch/arm/configs/s3c2410_defconfig b/trunk/arch/arm/configs/s3c2410_defconfig
index 2a63fb277196..96a794d8de84 100644
--- a/trunk/arch/arm/configs/s3c2410_defconfig
+++ b/trunk/arch/arm/configs/s3c2410_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 17:47:45 2005
+# Linux kernel version: 2.6.12-git4
+# Wed Jun 22 15:56:42 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -81,6 +83,7 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
#
# S3C24XX Implementations
@@ -134,6 +137,7 @@ CONFIG_CPU_TLB_V4WBI=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -143,7 +147,9 @@ CONFIG_CPU_TLB_V4WBI=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
CONFIG_ALIGNMENT_TRAP=y
#
@@ -297,7 +303,6 @@ CONFIG_PARPORT_1284=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
@@ -359,6 +364,7 @@ CONFIG_BLK_DEV_IDE_BAST=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -378,10 +384,11 @@ CONFIG_NET=y
# Networking options
#
# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
@@ -443,8 +450,9 @@ CONFIG_NETDEVICES=y
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
# CONFIG_SMC91X is not set
+CONFIG_DM9000=m
#
# Ethernet (1000 Mbit)
@@ -521,7 +529,6 @@ CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -563,7 +570,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
CONFIG_SERIAL_S3C2410=y
CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
@@ -605,7 +611,6 @@ CONFIG_S3C2410_RTC=y
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -654,6 +659,7 @@ CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -665,6 +671,7 @@ CONFIG_SENSORS_LM85=m
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -696,8 +703,10 @@ CONFIG_FB=y
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -782,7 +791,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
diff --git a/trunk/arch/arm/configs/shark_defconfig b/trunk/arch/arm/configs/shark_defconfig
index 1d9bcbbc8dfc..271823f0d708 100644
--- a/trunk/arch/arm/configs/shark_defconfig
+++ b/trunk/arch/arm/configs/shark_defconfig
@@ -1,22 +1,21 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:59:14 2005
+# Linux kernel version: 2.6.12-git3
+# Sat Jul 16 15:21:47 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -33,7 +32,10 @@ CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -81,6 +83,7 @@ CONFIG_ARCH_SHARK=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
#
# Processor Type
@@ -103,10 +106,12 @@ CONFIG_CPU_TLB_V4WB=y
#
CONFIG_ISA=y
CONFIG_ISA_DMA=y
+CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_HOST_VIA82C505=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -116,7 +121,9 @@ CONFIG_PCI_LEGACY_PROC=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
@@ -163,6 +170,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
@@ -172,8 +180,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Parallel port support
#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
@@ -189,7 +197,6 @@ CONFIG_PARPORT_PC=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
@@ -229,7 +236,7 @@ CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -261,6 +268,7 @@ CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -290,17 +298,14 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -314,11 +319,8 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
@@ -327,6 +329,7 @@ CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -344,6 +347,8 @@ CONFIG_SCSI_QLA2XXX=m
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -365,7 +370,6 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -380,7 +384,7 @@ CONFIG_INET=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
+CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -439,6 +443,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
@@ -483,9 +488,11 @@ CONFIG_CS89x0=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -569,7 +576,6 @@ CONFIG_SERIO_I8042=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -592,6 +598,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -653,6 +660,7 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -674,7 +682,7 @@ CONFIG_FB_CYBER2000=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -808,7 +816,7 @@ CONFIG_DNOTIFY=y
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
@@ -816,9 +824,9 @@ CONFIG_JOLIET=y
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
@@ -833,7 +841,6 @@ CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
@@ -857,13 +864,14 @@ CONFIG_RAMFS=y
#
# Network File Systems
#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -895,12 +903,12 @@ CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
-CONFIG_NLS=y
+CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -921,7 +929,7 @@ CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -945,11 +953,22 @@ CONFIG_NLS_ISO8859_1=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
diff --git a/trunk/arch/arm/kernel/Makefile b/trunk/arch/arm/kernel/Makefile
index 4a2af55e134b..3e1b0327e4d7 100644
--- a/trunk/arch/arm/kernel/Makefile
+++ b/trunk/arch/arm/kernel/Makefile
@@ -6,7 +6,7 @@ AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
# Object file lists.
-obj-y := arch.o compat.o dma.o entry-armv.o entry-common.o irq.o \
+obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \
process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \
time.o traps.o
diff --git a/trunk/arch/arm/kernel/arch.c b/trunk/arch/arm/kernel/arch.c
deleted file mode 100644
index 4e02fbeb10a6..000000000000
--- a/trunk/arch/arm/kernel/arch.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/arm/kernel/arch.c
- *
- * Architecture specific fixups.
- */
-#include
-#include
-#include
-
-#include
-#include
-#include
-#include
-
-unsigned int vram_size;
-
-#ifdef CONFIG_ARCH_ACORN
-
-unsigned int memc_ctrl_reg;
-unsigned int number_mfm_drives;
-
-static int __init parse_tag_acorn(const struct tag *tag)
-{
- memc_ctrl_reg = tag->u.acorn.memc_control_reg;
- number_mfm_drives = tag->u.acorn.adfsdrives;
-
- switch (tag->u.acorn.vram_pages) {
- case 512:
- vram_size += PAGE_SIZE * 256;
- case 256:
- vram_size += PAGE_SIZE * 256;
- default:
- break;
- }
-#if 0
- if (vram_size) {
- desc->video_start = 0x02000000;
- desc->video_end = 0x02000000 + vram_size;
- }
-#endif
- return 0;
-}
-
-__tagtable(ATAG_ACORN, parse_tag_acorn);
-
-#endif
diff --git a/trunk/arch/arm/kernel/armksyms.c b/trunk/arch/arm/kernel/armksyms.c
index 4c38bd8bc298..835d450797a1 100644
--- a/trunk/arch/arm/kernel/armksyms.c
+++ b/trunk/arch/arm/kernel/armksyms.c
@@ -30,9 +30,6 @@ extern void __lshrdi3(void);
extern void __modsi3(void);
extern void __muldi3(void);
extern void __ucmpdi2(void);
-extern void __udivdi3(void);
-extern void __umoddi3(void);
-extern void __udivmoddi4(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void __do_div64(void);
@@ -44,7 +41,10 @@ extern void fp_enter(void);
* This has a special calling convention; it doesn't
* modify any of the usual registers, except for LR.
*/
+#define EXPORT_CRC_ALIAS(sym) __CRC_SYMBOL(sym, "")
+
#define EXPORT_SYMBOL_ALIAS(sym,orig) \
+ EXPORT_CRC_ALIAS(sym) \
const struct kernel_symbol __ksymtab_##sym \
__attribute__((section("__ksymtab"))) = \
{ (unsigned long)&orig, #sym };
@@ -134,9 +134,6 @@ EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__modsi3);
EXPORT_SYMBOL(__muldi3);
EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__udivmoddi4);
EXPORT_SYMBOL(__udivsi3);
EXPORT_SYMBOL(__umodsi3);
EXPORT_SYMBOL(__do_div64);
diff --git a/trunk/arch/arm/kernel/ecard.c b/trunk/arch/arm/kernel/ecard.c
index 3dc15b131f53..6540db691338 100644
--- a/trunk/arch/arm/kernel/ecard.c
+++ b/trunk/arch/arm/kernel/ecard.c
@@ -866,19 +866,19 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
return ec;
}
-static ssize_t ecard_show_irq(struct device *dev, char *buf)
+static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->irq);
}
-static ssize_t ecard_show_dma(struct device *dev, char *buf)
+static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->dma);
}
-static ssize_t ecard_show_resources(struct device *dev, char *buf)
+static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
char *str = buf;
@@ -893,19 +893,19 @@ static ssize_t ecard_show_resources(struct device *dev, char *buf)
return str - buf;
}
-static ssize_t ecard_show_vendor(struct device *dev, char *buf)
+static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->cid.manufacturer);
}
-static ssize_t ecard_show_device(struct device *dev, char *buf)
+static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->cid.product);
}
-static ssize_t ecard_show_type(struct device *dev, char *buf)
+static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC");
diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S
index e14278d59882..39a6c1b0b9a3 100644
--- a/trunk/arch/arm/kernel/entry-armv.S
+++ b/trunk/arch/arm/kernel/entry-armv.S
@@ -23,49 +23,92 @@
#include "entry-header.S"
+/*
+ * Interrupt handling. Preserves r7, r8, r9
+ */
+ .macro irq_handler
+1: get_irqnr_and_base r0, r6, r5, lr
+ movne r1, sp
+ @
+ @ routine called with r0 = irq number, r1 = struct pt_regs *
+ @
+ adrne lr, 1b
+ bne asm_do_IRQ
+
+#ifdef CONFIG_SMP
+ /*
+ * XXX
+ *
+ * this macro assumes that irqstat (r6) and base (r5) are
+ * preserved from get_irqnr_and_base above
+ */
+ test_for_ipi r0, r6, r5, lr
+ movne r0, sp
+ adrne lr, 1b
+ bne do_IPI
+#endif
+
+ .endm
+
/*
* Invalid mode handlers
*/
- .macro inv_entry, sym, reason
- sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
- stmia sp, {r0 - lr} @ Save XXX r0 - lr
- ldr r4, .LC\sym
+ .macro inv_entry, reason
+ sub sp, sp, #S_FRAME_SIZE
+ stmib sp, {r1 - lr}
mov r1, #\reason
.endm
__pabt_invalid:
- inv_entry abt, BAD_PREFETCH
- b 1f
+ inv_entry BAD_PREFETCH
+ b common_invalid
__dabt_invalid:
- inv_entry abt, BAD_DATA
- b 1f
+ inv_entry BAD_DATA
+ b common_invalid
__irq_invalid:
- inv_entry irq, BAD_IRQ
- b 1f
+ inv_entry BAD_IRQ
+ b common_invalid
__und_invalid:
- inv_entry und, BAD_UNDEFINSTR
+ inv_entry BAD_UNDEFINSTR
+
+ @
+ @ XXX fall through to common_invalid
+ @
+
+@
+@ common_invalid - generic code for failed exception (re-entrant version of handlers)
+@
+common_invalid:
+ zero_fp
+
+ ldmia r0, {r4 - r6}
+ add r0, sp, #S_PC @ here for interlock avoidance
+ mov r7, #-1 @ "" "" "" ""
+ str r4, [sp] @ save preserved r0
+ stmia r0, {r5 - r7} @ lr_,
+ @ cpsr_, "old_r0"
-1: zero_fp
- ldmia r4, {r5 - r7} @ Get XXX pc, cpsr, old_r0
- add r4, sp, #S_PC
- stmia r4, {r5 - r7} @ Save XXX pc, cpsr, old_r0
mov r0, sp
- and r2, r6, #31 @ int mode
+ and r2, r6, #0x1f
b bad_mode
/*
* SVC mode handlers
*/
- .macro svc_entry, sym
+ .macro svc_entry
sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ save r0 - r12
- ldr r2, .LC\sym
- add r0, sp, #S_FRAME_SIZE
- ldmia r2, {r2 - r4} @ get pc, cpsr
- add r5, sp, #S_SP
+ stmib sp, {r1 - r12}
+
+ ldmia r0, {r1 - r3}
+ add r5, sp, #S_SP @ here for interlock avoidance
+ mov r4, #-1 @ "" "" "" ""
+ add r0, sp, #S_FRAME_SIZE @ "" "" "" ""
+ str r1, [sp] @ save the "real" r0 copied
+ @ from the exception stack
+
mov r1, lr
@
@@ -82,7 +125,7 @@ __und_invalid:
.align 5
__dabt_svc:
- svc_entry abt
+ svc_entry
@
@ get ready to re-enable interrupts if appropriate
@@ -129,28 +172,24 @@ __dabt_svc:
.align 5
__irq_svc:
- svc_entry irq
+ svc_entry
+
#ifdef CONFIG_PREEMPT
- get_thread_info r8
- ldr r9, [r8, #TI_PREEMPT] @ get preempt count
- add r7, r9, #1 @ increment it
- str r7, [r8, #TI_PREEMPT]
+ get_thread_info tsk
+ ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
+ add r7, r8, #1 @ increment it
+ str r7, [tsk, #TI_PREEMPT]
#endif
-1: get_irqnr_and_base r0, r6, r5, lr
- movne r1, sp
- @
- @ routine called with r0 = irq number, r1 = struct pt_regs *
- @
- adrne lr, 1b
- bne asm_do_IRQ
+
+ irq_handler
#ifdef CONFIG_PREEMPT
- ldr r0, [r8, #TI_FLAGS] @ get flags
+ ldr r0, [tsk, #TI_FLAGS] @ get flags
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
preempt_return:
- ldr r0, [r8, #TI_PREEMPT] @ read preempt value
+ ldr r0, [tsk, #TI_PREEMPT] @ read preempt value
+ str r8, [tsk, #TI_PREEMPT] @ restore preempt count
teq r0, r7
- str r9, [r8, #TI_PREEMPT] @ restore preempt count
strne r0, [r0, -r0] @ bug()
#endif
ldr r0, [sp, #S_PSR] @ irqs are already disabled
@@ -161,7 +200,7 @@ preempt_return:
#ifdef CONFIG_PREEMPT
svc_preempt:
- teq r9, #0 @ was preempt count = 0
+ teq r8, #0 @ was preempt count = 0
ldreq r6, .LCirq_stat
movne pc, lr @ no
ldr r0, [r6, #4] @ local_irq_count
@@ -169,9 +208,9 @@ svc_preempt:
adds r0, r0, r1
movne pc, lr
mov r7, #0 @ preempt_schedule_irq
- str r7, [r8, #TI_PREEMPT] @ expects preempt_count == 0
+ str r7, [tsk, #TI_PREEMPT] @ expects preempt_count == 0
1: bl preempt_schedule_irq @ irq en/disable is done inside
- ldr r0, [r8, #TI_FLAGS] @ get new tasks TI_FLAGS
+ ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS
tst r0, #_TIF_NEED_RESCHED
beq preempt_return @ go again
b 1b
@@ -179,7 +218,7 @@ svc_preempt:
.align 5
__und_svc:
- svc_entry und
+ svc_entry
@
@ call emulation code, which returns using r9 if it has emulated
@@ -209,7 +248,7 @@ __und_svc:
.align 5
__pabt_svc:
- svc_entry abt
+ svc_entry
@
@ re-enable interrupts if appropriate
@@ -242,12 +281,8 @@ __pabt_svc:
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.align 5
-.LCirq:
- .word __temp_irq
-.LCund:
- .word __temp_und
-.LCabt:
- .word __temp_abt
+.LCcralign:
+ .word cr_alignment
#ifdef MULTI_ABORT
.LCprocfns:
.word processor
@@ -262,12 +297,16 @@ __pabt_svc:
/*
* User mode handlers
*/
- .macro usr_entry, sym
- sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
- stmia sp, {r0 - r12} @ save r0 - r12
- ldr r7, .LC\sym
- add r5, sp, #S_PC
- ldmia r7, {r2 - r4} @ Get USR pc, cpsr
+ .macro usr_entry
+ sub sp, sp, #S_FRAME_SIZE
+ stmib sp, {r1 - r12}
+
+ ldmia r0, {r1 - r3}
+ add r0, sp, #S_PC @ here for interlock avoidance
+ mov r4, #-1 @ "" "" "" ""
+
+ str r1, [sp] @ save the "real" r0 copied
+ @ from the exception stack
#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
@ make sure our user space atomic helper is aborted
@@ -284,13 +323,13 @@ __pabt_svc:
@
@ Also, separately save sp_usr and lr_usr
@
- stmia r5, {r2 - r4}
- stmdb r5, {sp, lr}^
+ stmia r0, {r2 - r4}
+ stmdb r0, {sp, lr}^
@
@ Enable the alignment trap while in kernel mode
@
- alignment_trap r7, r0, __temp_\sym
+ alignment_trap r0
@
@ Clear FP to mark the first stack frame
@@ -300,7 +339,7 @@ __pabt_svc:
.align 5
__dabt_usr:
- usr_entry abt
+ usr_entry
@
@ Call the processor-specific abort handler:
@@ -329,30 +368,23 @@ __dabt_usr:
.align 5
__irq_usr:
- usr_entry irq
+ usr_entry
+ get_thread_info tsk
#ifdef CONFIG_PREEMPT
- get_thread_info r8
- ldr r9, [r8, #TI_PREEMPT] @ get preempt count
- add r7, r9, #1 @ increment it
- str r7, [r8, #TI_PREEMPT]
+ ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
+ add r7, r8, #1 @ increment it
+ str r7, [tsk, #TI_PREEMPT]
#endif
-1: get_irqnr_and_base r0, r6, r5, lr
- movne r1, sp
- adrne lr, 1b
- @
- @ routine called with r0 = irq number, r1 = struct pt_regs *
- @
- bne asm_do_IRQ
+
+ irq_handler
#ifdef CONFIG_PREEMPT
- ldr r0, [r8, #TI_PREEMPT]
+ ldr r0, [tsk, #TI_PREEMPT]
+ str r8, [tsk, #TI_PREEMPT]
teq r0, r7
- str r9, [r8, #TI_PREEMPT]
strne r0, [r0, -r0]
- mov tsk, r8
-#else
- get_thread_info tsk
#endif
+
mov why, #0
b ret_to_user
@@ -360,7 +392,7 @@ __irq_usr:
.align 5
__und_usr:
- usr_entry und
+ usr_entry
tst r3, #PSR_T_BIT @ Thumb mode?
bne fpundefinstr @ ignore FP
@@ -476,7 +508,7 @@ fpundefinstr:
.align 5
__pabt_usr:
- usr_entry abt
+ usr_entry
enable_irq @ Enable interrupts
mov r0, r2 @ address (pc)
@@ -741,29 +773,41 @@ __kuser_helper_end:
*
* Common stub entry macro:
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
+ *
+ * SP points to a minimal amount of processor-private memory, the address
+ * of which is copied into r0 for the mode specific abort handler.
*/
- .macro vector_stub, name, sym, correction=0
+ .macro vector_stub, name, correction=0
.align 5
vector_\name:
- ldr r13, .LCs\sym
.if \correction
sub lr, lr, #\correction
.endif
- str lr, [r13] @ save lr_IRQ
+
+ @
+ @ Save r0, lr_ (parent PC) and spsr_
+ @ (parent CPSR)
+ @
+ stmia sp, {r0, lr} @ save r0, lr
mrs lr, spsr
- str lr, [r13, #4] @ save spsr_IRQ
+ str lr, [sp, #8] @ save spsr
+
@
- @ now branch to the relevant MODE handling routine
+ @ Prepare for SVC32 mode. IRQs remain disabled.
@
- mrs r13, cpsr
- bic r13, r13, #MODE_MASK
- orr r13, r13, #SVC_MODE
- msr spsr_cxsf, r13 @ switch to SVC_32 mode
+ mrs r0, cpsr
+ bic r0, r0, #MODE_MASK
+ orr r0, r0, #SVC_MODE
+ msr spsr_cxsf, r0
- and lr, lr, #15
+ @
+ @ the branch table must immediately follow this code
+ @
+ mov r0, sp
+ and lr, lr, #0x0f
ldr lr, [pc, lr, lsl #2]
- movs pc, lr @ Changes mode and branches
+ movs pc, lr @ branch to handler in SVC mode
.endm
.globl __stubs_start
@@ -771,7 +815,7 @@ __stubs_start:
/*
* Interrupt dispatcher
*/
- vector_stub irq, irq, 4
+ vector_stub irq, 4
.long __irq_usr @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -794,7 +838,7 @@ __stubs_start:
* Data abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub dabt, abt, 8
+ vector_stub dabt, 8
.long __dabt_usr @ 0 (USR_26 / USR_32)
.long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -817,7 +861,7 @@ __stubs_start:
* Prefetch abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub pabt, abt, 4
+ vector_stub pabt, 4
.long __pabt_usr @ 0 (USR_26 / USR_32)
.long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -840,7 +884,7 @@ __stubs_start:
* Undef instr entry dispatcher
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
- vector_stub und, und
+ vector_stub und
.long __und_usr @ 0 (USR_26 / USR_32)
.long __und_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -894,13 +938,6 @@ vector_addrexcptn:
.LCvswi:
.word vector_swi
-.LCsirq:
- .word __temp_irq
-.LCsund:
- .word __temp_und
-.LCsabt:
- .word __temp_abt
-
.globl __stubs_end
__stubs_end:
@@ -922,23 +959,6 @@ __vectors_end:
.data
-/*
- * Do not reorder these, and do not insert extra data between...
- */
-
-__temp_irq:
- .word 0 @ saved lr_irq
- .word 0 @ saved spsr_irq
- .word -1 @ old_r0
-__temp_und:
- .word 0 @ Saved lr_und
- .word 0 @ Saved spsr_und
- .word -1 @ old_r0
-__temp_abt:
- .word 0 @ Saved lr_abt
- .word 0 @ Saved spsr_abt
- .word -1 @ old_r0
-
.globl cr_alignment
.globl cr_no_alignment
cr_alignment:
diff --git a/trunk/arch/arm/kernel/entry-header.S b/trunk/arch/arm/kernel/entry-header.S
index a3d40a0e2b04..afef21273963 100644
--- a/trunk/arch/arm/kernel/entry-header.S
+++ b/trunk/arch/arm/kernel/entry-header.S
@@ -59,11 +59,10 @@
mov \rd, \rd, lsl #13
.endm
- .macro alignment_trap, rbase, rtemp, sym
+ .macro alignment_trap, rtemp
#ifdef CONFIG_ALIGNMENT_TRAP
-#define OFF_CR_ALIGNMENT(x) cr_alignment - x
-
- ldr \rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)]
+ ldr \rtemp, .LCcralign
+ ldr \rtemp, [\rtemp]
mcr p15, 0, \rtemp, c1, c0
#endif
.endm
diff --git a/trunk/arch/arm/kernel/head.S b/trunk/arch/arm/kernel/head.S
index 4733877296d4..1155cf07c871 100644
--- a/trunk/arch/arm/kernel/head.S
+++ b/trunk/arch/arm/kernel/head.S
@@ -2,6 +2,8 @@
* linux/arch/arm/kernel/head.S
*
* Copyright (C) 1994-2002 Russell King
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -165,6 +167,48 @@ __mmap_switched:
stmia r6, {r0, r4} @ Save control register values
b start_kernel
+#if defined(CONFIG_SMP)
+ .type secondary_startup, #function
+ENTRY(secondary_startup)
+ /*
+ * Common entry point for secondary CPUs.
+ *
+ * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
+ * the processor type - there is no need to check the machine type
+ * as it has already been validated by the primary processor.
+ */
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+ bl __lookup_processor_type
+ movs r10, r5 @ invalid processor?
+ moveq r0, #'p' @ yes, error 'p'
+ beq __error
+
+ /*
+ * Use the page tables supplied from __cpu_up.
+ */
+ adr r4, __secondary_data
+ ldmia r4, {r5, r6, r13} @ address to jump to after
+ sub r4, r4, r5 @ mmu has been enabled
+ ldr r4, [r6, r4] @ get secondary_data.pgdir
+ adr lr, __enable_mmu @ return address
+ add pc, r10, #12 @ initialise processor
+ @ (return control reg)
+
+ /*
+ * r6 = &secondary_data
+ */
+ENTRY(__secondary_switched)
+ ldr sp, [r6, #4] @ get secondary_data.stack
+ mov fp, #0
+ b secondary_start_kernel
+
+ .type __secondary_data, %object
+__secondary_data:
+ .long .
+ .long secondary_data
+ .long __secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
/*
@@ -300,9 +344,9 @@ __create_page_tables:
str r6, [r0]
#endif
+#ifdef CONFIG_DEBUG_LL
bic r7, r7, #0x0c @ turn off cacheable
@ and bufferable bits
-#ifdef CONFIG_DEBUG_LL
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
@@ -328,27 +372,23 @@ __create_page_tables:
teq r1, #MACH_TYPE_NETWINDER
teqne r1, #MACH_TYPE_CATS
bne 1f
- add r0, r4, #0x3fc0 @ ff000000
- mov r3, #0x7c000000
- orr r3, r3, r7
- str r3, [r0], #4
- add r3, r3, #1 << 20
- str r3, [r0], #4
+ add r0, r4, #0xff000000 >> 18
+ orr r3, r7, #0x7c000000
+ str r3, [r0]
1:
#endif
-#endif
#ifdef CONFIG_ARCH_RPC
/*
* Map in screen at 0x02000000 & SCREEN2_BASE
* Similar reasons here - for debug. This is
* only for Acorn RiscPC architectures.
*/
- add r0, r4, #0x80 @ 02000000
- mov r3, #0x02000000
- orr r3, r3, r7
+ add r0, r4, #0x02000000 >> 18
+ orr r3, r7, #0x02000000
str r3, [r0]
- add r0, r4, #0x3600 @ d8000000
+ add r0, r4, #0xd8000000 >> 18
str r3, [r0]
+#endif
#endif
mov pc, lr
.ltorg
diff --git a/trunk/arch/arm/kernel/irq.c b/trunk/arch/arm/kernel/irq.c
index ff187f4308f0..395137a8fad2 100644
--- a/trunk/arch/arm/kernel/irq.c
+++ b/trunk/arch/arm/kernel/irq.c
@@ -4,6 +4,10 @@
* Copyright (C) 1992 Linus Torvalds
* Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
*
+ * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
+ * Dynamic Tick Timer written by Tony Lindgren and
+ * Tuukka Tikkanen .
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -37,6 +41,7 @@
#include
#include
#include
+#include
/*
* Maximum IRQ count. Currently, this is arbitary. However, it should
@@ -329,6 +334,15 @@ __do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
spin_unlock(&irq_controller_lock);
+#ifdef CONFIG_NO_IDLE_HZ
+ if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
+ write_seqlock(&xtime_lock);
+ if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
+ system_timer->dyn_tick->handler(irq, 0, regs);
+ write_sequnlock(&xtime_lock);
+ }
+#endif
+
if (!(action->flags & SA_INTERRUPT))
local_irq_enable();
diff --git a/trunk/arch/arm/kernel/process.c b/trunk/arch/arm/kernel/process.c
index 8f146a4b4752..409db6d5ec99 100644
--- a/trunk/arch/arm/kernel/process.c
+++ b/trunk/arch/arm/kernel/process.c
@@ -32,6 +32,7 @@
#include
#include