diff --git a/[refs] b/[refs] index fe2214c081a3..500a5209090f 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: b5678a34762edf2c8de1c60c125fea42a8c17e63 +refs/heads/master: 7ce9573e093891f5807e6e50f3bd2012f1e5d0fe diff --git a/trunk/Documentation/hwmon/adt7473 b/trunk/Documentation/hwmon/adt7473 new file mode 100644 index 000000000000..22d8b19046ab --- /dev/null +++ b/trunk/Documentation/hwmon/adt7473 @@ -0,0 +1,79 @@ +Kernel driver adt7473 +====================== + +Supported chips: + * Analog Devices ADT7473 + Prefix: 'adt7473' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7473 chip family. + +The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 +specification. Using an analog to digital converter it measures three (3) +temperatures and two (2) voltages. It has three (3) 16-bit counters for +measuring fan speed. There are three (3) PWM outputs that can be used +to control fan speed. + +A sophisticated control system for the PWM outputs is designed into the +LM85 that allows fan speed to be adjusted automatically based on any of the +three temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7473 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. +This feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT7473 will signal an ALARM if +any measured value exceeds either limit. + +The ADT7473 samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7473 have a 10-bit ADC and can therefore measure temperatures +with 0.25 degC resolution. Temperature readings can be configured either +for twos complement format or "Offset 64" format, wherein 63 is subtracted +from the raw value to get the temperature value. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +Hardware Configurations +----------------------- + +The ADT7473 chips have an optional SMBALERT output that can be used to +signal the chipset in case a limit is exceeded or the temperature sensors +fail. Individual sensor interrupts can be masked so they won't trigger +SMBALERT. The SMBALERT output if configured replaces the PWM2 function. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and +* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7473 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). + +Notes +----- + +The NVIDIA binary driver presents an ADT7473 chip via an on-card i2c bus. +Unfortunately, they fail to set the i2c adapter class, so this driver may +fail to find the chip until the nvidia driver is patched. diff --git a/trunk/Documentation/hwmon/coretemp b/trunk/Documentation/hwmon/coretemp index 170bf862437b..dbbe6c7025b0 100644 --- a/trunk/Documentation/hwmon/coretemp +++ b/trunk/Documentation/hwmon/coretemp @@ -4,9 +4,10 @@ Kernel driver coretemp Supported chips: * All Intel Core family Prefix: 'coretemp' - CPUID: family 0x6, models 0xe, 0xf, 0x16 + CPUID: family 0x6, models 0xe, 0xf, 0x16, 0x17 Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3A: System Programming Guide + http://softwarecommunity.intel.com/Wiki/Mobility/720.htm Author: Rudolf Marek @@ -25,7 +26,8 @@ may be raised, if the temperature grows enough (more than TjMax) to trigger the Out-Of-Spec bit. Following table summarizes the exported sysfs files: temp1_input - Core temperature (in millidegrees Celsius). -temp1_crit - Maximum junction temperature (in millidegrees Celsius). +temp1_max - All cooling devices should be turned on (on Core2). +temp1_crit - Maximum junction temperature (in millidegrees Celsius). temp1_crit_alarm - Set when Out-of-spec bit is set, never clears. Correct CPU operation is no longer guaranteed. temp1_label - Contains string "Core X", where X is processor diff --git a/trunk/Documentation/ja_JP/stable_kernel_rules.txt b/trunk/Documentation/ja_JP/stable_kernel_rules.txt index 17d87519e468..b3ffe870de33 100644 --- a/trunk/Documentation/ja_JP/stable_kernel_rules.txt +++ b/trunk/Documentation/ja_JP/stable_kernel_rules.txt @@ -11,69 +11,69 @@ comment or update of this file, please try to update Original(English) file at first. ================================== -これは、 +これは、 linux-2.6.24/Documentation/stable_kernel_rules.txt -の和訳です。 +の和訳です。 -翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ > -翻訳日： 2007/12/30 -翻訳者： Tsugikazu Shibata -校正者： 武井伸光さん、 - かねこさん (Seiji Kaneko) - 小林 雅典さん (Masanori Kobayasi) - 野口さん (Kenji Noguchi) - 神宮信太郎さん +翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ > +翻訳日： 2007/12/30 +翻訳者： Tsugikazu Shibata +校正者： 武井伸光さん、 + かねこさん (Seiji Kaneko) + 小林 雅典さん (Masanori Kobayasi) + 野口さん (Kenji Noguchi) + 神宮信太郎さん ================================== -ずっと知りたかった Linux 2.6 -stable リリースの全て +ずっと知りたかった Linux 2.6 -stable リリースの全て -"-stable" ツリーにどのような種類のパッチが受け入れられるか、どのような -ものが受け入れられないか、についての規則- +"-stable" ツリーにどのような種類のパッチが受け入れられるか、どのような +ものが受け入れられないか、についての規則- - - 明らかに正しく、テストされているものでなければならない。 - - 文脈(変更行の前後)を含めて 100 行より大きくてはいけない。 - - ただ一個のことだけを修正しているべき。 - - 皆を悩ませている本物のバグを修正しなければならない。("これはバグで - あるかもしれないが..." のようなものではない) - - ビルドエラー(CONFIG_BROKENになっているものを除く), oops, ハング、デー - タ破壊、現実のセキュリティ問題、その他 "ああ、これはダメだね"という - ようなものを修正しなければならない。短く言えば、重大な問題。 - - どのように競合状態が発生するかの説明も一緒に書かれていない限り、 - "理論的には競合状態になる"ようなものは不可。 - - いかなる些細な修正も含めることはできない。(スペルの修正、空白のクリー - ンアップなど) - - 対応するサブシステムメンテナが受け入れたものでなければならない。 - - Documentation/SubmittingPatches の規則に従ったものでなければならない。 + - 明らかに正しく、テストされているものでなければならない。 + - 文脈(変更行の前後)を含めて 100 行より大きくてはいけない。 + - ただ一個のことだけを修正しているべき。 + - 皆を悩ませている本物のバグを修正しなければならない。("これはバグで + あるかもしれないが..." のようなものではない) + - ビルドエラー(CONFIG_BROKENになっているものを除く), oops, ハング、デー + タ破壊、現実のセキュリティ問題、その他 "ああ、これはダメだね"という + ようなものを修正しなければならない。短く言えば、重大な問題。 + - どのように競合状態が発生するかの説明も一緒に書かれていない限り、 + "理論的には競合状態になる"ようなものは不可。 + - いかなる些細な修正も含めることはできない。(スペルの修正、空白のクリー + ンアップなど) + - 対応するサブシステムメンテナが受け入れたものでなければならない。 + - Documentation/SubmittingPatches の規則に従ったものでなければならない。 --stable ツリーにパッチを送付する手続き- +-stable ツリーにパッチを送付する手続き- - - 上記の規則に従っているかを確認した後に、stable@kernel.org にパッチ - を送る。 - - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合 - には NAK を受け取る。この反応は開発者たちのスケジュールによって、数 - 日かかる場合がある。 - - もし受け取られたら、パッチは他の開発者たちのレビューのために - -stable キューに追加される。 - - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ - きではなく、代わりに security@kernel.org のアドレスに送られる。 + - 上記の規則に従っているかを確認した後に、stable@kernel.org にパッチ + を送る。 + - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合 + には NAK を受け取る。この反応は開発者たちのスケジュールによって、数 + 日かかる場合がある。 + - もし受け取られたら、パッチは他の開発者たちのレビューのために + -stable キューに追加される。 + - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ + きではなく、代わりに security@kernel.org のアドレスに送られる。 -レビューサイクル- +レビューサイクル- - - -stable メンテナがレビューサイクルを決めるとき、パッチはレビュー委 - 員会とパッチが影響する領域のメンテナ(提供者がその領域のメンテナで無 - い限り)に送られ、linux-kernel メーリングリストにCCされる。 - - レビュー委員会は 48時間の間に ACK か NAK を出す。 - - もしパッチが委員会のメンバから却下れるか、メンテナ達やメンバが気付 - かなかった問題が持ちあがり、linux-kernel メンバがパッチに異議を唱え - た場合には、パッチはキューから削除される。 - - レビューサイクルの最後に、ACK を受けたパッチは最新の -stable リリー - スに追加され、その後に新しい -stable リリースが行われる。 - - セキュリティパッチは、通常のレビューサイクルを通らず、セキュリティ - カーネルチームから直接 -stable ツリーに受け付けられる。 - この手続きの詳細については kernel security チームに問い合わせること。 + - -stable メンテナがレビューサイクルを決めるとき、パッチはレビュー委 + 員会とパッチが影響する領域のメンテナ(提供者がその領域のメンテナで無 + い限り)に送られ、linux-kernel メーリングリストにCCされる。 + - レビュー委員会は 48時間の間に ACK か NAK を出す。 + - もしパッチが委員会のメンバから却下されるか、メンテナ達やメンバが気付 + かなかった問題が持ちあがり、linux-kernel メンバがパッチに異議を唱え + た場合には、パッチはキューから削除される。 + - レビューサイクルの最後に、ACK を受けたパッチは最新の -stable リリー + スに追加され、その後に新しい -stable リリースが行われる。 + - セキュリティパッチは、通常のレビューサイクルを通らず、セキュリティ + カーネルチームから直接 -stable ツリーに受け付けられる。 + この手続きの詳細については kernel security チームに問い合わせること。 -レビュー委員会- +レビュー委員会- - - この委員会は、このタスクについて活動する多くのボランティアと、少数の - 非ボランティアのカーネル開発者達で構成されている。 + - この委員会は、このタスクについて活動する多くのボランティアと、少数の + 非ボランティアのカーネル開発者達で構成されている。 diff --git a/trunk/Documentation/laptops/thinkpad-acpi.txt b/trunk/Documentation/laptops/thinkpad-acpi.txt index 6c2477754a2a..76cb428435da 100644 --- a/trunk/Documentation/laptops/thinkpad-acpi.txt +++ b/trunk/Documentation/laptops/thinkpad-acpi.txt @@ -160,7 +160,7 @@ Hot keys procfs: /proc/acpi/ibm/hotkey sysfs device attribute: hotkey_* -In a ThinkPad, the ACPI HKEY handler is responsible for comunicating +In a ThinkPad, the ACPI HKEY handler is responsible for communicating some important events and also keyboard hot key presses to the operating system. Enabling the hotkey functionality of thinkpad-acpi signals the firmware that such a driver is present, and modifies how the ThinkPad @@ -193,7 +193,7 @@ Not all bits in the mask can be modified. Not all bits that can be modified do anything. Not all hot keys can be individually controlled by the mask. Some models do not support the mask at all, and in those models, hot keys cannot be controlled individually. The behaviour of -the mask is, therefore, higly dependent on the ThinkPad model. +the mask is, therefore, highly dependent on the ThinkPad model. Note that unmasking some keys prevents their default behavior. For example, if Fn+F5 is unmasked, that key will no longer enable/disable @@ -288,7 +288,7 @@ sysfs notes: in ACPI event mode, volume up/down/mute are reported as separate events, but this behaviour may be corrected in future releases of this driver, in which case the - ThinkPad volume mixer user interface semanthics will be + ThinkPad volume mixer user interface semantics will be enforced. hotkey_poll_freq: @@ -306,13 +306,20 @@ sysfs notes: The recommended polling frequency is 10Hz. hotkey_radio_sw: - if the ThinkPad has a hardware radio switch, this + If the ThinkPad has a hardware radio switch, this attribute will read 0 if the switch is in the "radios - disabled" postition, and 1 if the switch is in the + disabled" position, and 1 if the switch is in the "radios enabled" position. This attribute has poll()/select() support. + hotkey_tablet_mode: + If the ThinkPad has tablet capabilities, this attribute + will read 0 if the ThinkPad is in normal mode, and + 1 if the ThinkPad is in tablet mode. + + This attribute has poll()/select() support. + hotkey_report_mode: Returns the state of the procfs ACPI event report mode filter for hot keys. If it is set to 1 (the default), @@ -339,7 +346,7 @@ sysfs notes: wakeup_hotunplug_complete: Set to 1 if the system was waken up because of an undock or bay ejection request, and that request - was sucessfully completed. At this point, it might + was successfully completed. At this point, it might be useful to send the system back to sleep, at the user's choice. Refer to HKEY events 0x4003 and 0x3003, below. @@ -392,7 +399,7 @@ event code Key Notes Lenovo: battery 0x1004 0x03 FN+F4 Sleep button (ACPI sleep button - semanthics, i.e. sleep-to-RAM). + semantics, i.e. sleep-to-RAM). It is always generate some kind of event, either the hot key event or a ACPI sleep button @@ -403,12 +410,12 @@ event code Key Notes time passes. 0x1005 0x04 FN+F5 Radio. Enables/disables - the internal BlueTooth hardware + the internal Bluetooth hardware and W-WAN card if left in control of the firmware. Does not affect the WLAN card. Should be used to turn on/off all - radios (bluetooth+W-WAN+WLAN), + radios (Bluetooth+W-WAN+WLAN), really. 0x1006 0x05 FN+F6 - @@ -417,7 +424,7 @@ event code Key Notes Do you feel lucky today? 0x1008 0x07 FN+F8 IBM: toggle screen expand - Lenovo: configure ultranav + Lenovo: configure UltraNav 0x1009 0x08 FN+F9 - .. .. .. @@ -447,7 +454,7 @@ event code Key Notes 0x1011 0x10 FN+END Brightness down. See brightness up for details. -0x1012 0x11 FN+PGUP Thinklight toggle. This key is +0x1012 0x11 FN+PGUP ThinkLight toggle. This key is always handled by the firmware, even when unmasked. @@ -469,7 +476,7 @@ event code Key Notes key is always handled by the firmware, even when unmasked. -0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key +0x1018 0x17 THINKPAD ThinkPad/Access IBM/Lenovo key 0x1019 0x18 unknown .. .. .. @@ -488,9 +495,17 @@ If a key is mapped to KEY_UNKNOWN, it generates an input event that includes an scan code. If a key is mapped to anything else, it will generate input device EV_KEY events. +In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW +events for switches: + +SW_RADIO T60 and later hardare rfkill rocker switch +SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A + Non hot-key ACPI HKEY event map: 0x5001 Lid closed 0x5002 Lid opened +0x5009 Tablet swivel: switched to tablet mode +0x500A Tablet swivel: switched to normal mode 0x7000 Radio Switch may have changed state The above events are not propagated by the driver, except for legacy @@ -505,9 +520,7 @@ The above events are never propagated by the driver. 0x3003 Bay ejection (see 0x2x05) complete, can sleep again 0x4003 Undocked (see 0x2x04), can sleep again -0x5009 Tablet swivel: switched to tablet mode -0x500A Tablet swivel: switched to normal mode -0x500B Tablet pen insterted into its storage bay +0x500B Tablet pen inserted into its storage bay 0x500C Tablet pen removed from its storage bay 0x5010 Brightness level changed (newer Lenovo BIOSes) @@ -539,7 +552,7 @@ sysfs (it is read-only). If the hotkey_report_mode module parameter is set to 1 or 2, it cannot be changed later through sysfs (any writes will return -EPERM to signal that hotkey_report_mode was locked. On 2.6.23 and later, where -hotkey_report_mode cannot be changed at all, writes will return -EACES). +hotkey_report_mode cannot be changed at all, writes will return -EACCES). hotkey_report_mode set to 1 makes the driver export through the procfs ACPI event interface all hot key presses (which are *also* sent to the @@ -584,7 +597,7 @@ Sysfs notes: 0: disables Bluetooth / Bluetooth is disabled 1: enables Bluetooth / Bluetooth is enabled. - Note: this interface will be probably be superseeded by the + Note: this interface will be probably be superseded by the generic rfkill class, so it is NOT to be considered stable yet. Video output control -- /proc/acpi/ibm/video @@ -791,12 +804,12 @@ on the X40 (tpb is the ThinkPad Buttons utility): 1 - Related to "Volume up" key press 2 - Related to "Mute on" key press 3 - Related to "Access IBM" key press - 4 - Related to "LCD brightness up" key pess + 4 - Related to "LCD brightness up" key press 5 - Related to "LCD brightness down" key press 11 - Related to "toggle screen expansion" key press/function 12 - Related to "ThinkLight on" 13 - Related to "ThinkLight off" - 14 - Related to "ThinkLight" key press (toggle thinklight) + 14 - Related to "ThinkLight" key press (toggle ThinkLight) The cmos command interface is prone to firmware split-brain problems, as in newer ThinkPads it is just a compatibility layer. Do not use it, it is @@ -1024,7 +1037,7 @@ There are two interfaces to the firmware for direct brightness control, EC and CMOS. To select which one should be used, use the brightness_mode module parameter: brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC -and CMOS. The driver tries to autodetect which interface to use. +and CMOS. The driver tries to auto-detect which interface to use. When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct @@ -1266,8 +1279,8 @@ experimental=1 parameter when loading the module. This feature shows the presence and current state of a W-WAN (Sierra Wireless EV-DO) device. -It was tested on a Lenovo Thinkpad X60. It should probably work on other -Thinkpad models which come with this module installed. +It was tested on a Lenovo ThinkPad X60. It should probably work on other +ThinkPad models which come with this module installed. Procfs notes: @@ -1286,7 +1299,7 @@ Sysfs notes: 0: disables WWAN card / WWAN card is disabled 1: enables WWAN card / WWAN card is enabled. - Note: this interface will be probably be superseeded by the + Note: this interface will be probably be superseded by the generic rfkill class, so it is NOT to be considered stable yet. Multiple Commands, Module Parameters @@ -1309,7 +1322,7 @@ Enabling debugging output The module takes a debug parameter which can be used to selectively enable various classes of debugging output, for example: - modprobe ibm_acpi debug=0xffff + modprobe thinkpad_acpi debug=0xffff will enable all debugging output classes. It takes a bitmask, so to enable more than one output class, just add their values. @@ -1356,7 +1369,7 @@ Sysfs interface changelog: NVRAM is compiled out by the user because it is unneeded/undesired in the first place). 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling - and proper hotkey_mask semanthics (version 8 of the + and proper hotkey_mask semantics (version 8 of the NVRAM polling patch). Some development snapshots of 0.18 had an earlier version that did strange things to hotkey_mask. diff --git a/trunk/Documentation/stable_kernel_rules.txt b/trunk/Documentation/stable_kernel_rules.txt index c815c5206e84..4cfc78835bc1 100644 --- a/trunk/Documentation/stable_kernel_rules.txt +++ b/trunk/Documentation/stable_kernel_rules.txt @@ -16,8 +16,9 @@ Rules on what kind of patches are accepted, and which ones are not, into the race can be exploited is also provided. - It cannot contain any "trivial" fixes in it (spelling changes, whitespace cleanups, etc). - - It must be accepted by the relevant subsystem maintainer. - It must follow the Documentation/SubmittingPatches rules. + - It or an equivalent fix must already exist in Linus' tree. Quote the + respective commit ID in Linus' tree in your patch submission to -stable. Procedure for submitting patches to the -stable tree: @@ -28,7 +29,9 @@ Procedure for submitting patches to the -stable tree: queue, or a NAK if the patch is rejected. This response might take a few days, according to the developer's schedules. - If accepted, the patch will be added to the -stable queue, for review by - other developers. + other developers and by the relevant subsystem maintainer. + - If the stable@kernel.org address is added to a patch, when it goes into + Linus's tree it will automatically be emailed to the stable team. - Security patches should not be sent to this alias, but instead to the documented security@kernel.org address. diff --git a/trunk/Documentation/vm/slabinfo.c b/trunk/Documentation/vm/slabinfo.c index 7123fee708ca..22d7e3e4d60c 100644 --- a/trunk/Documentation/vm/slabinfo.c +++ b/trunk/Documentation/vm/slabinfo.c @@ -1123,7 +1123,7 @@ void read_slab_dir(void) char *t; int count; - if (chdir("/sys/kernel/slab")) + if (chdir("/sys/kernel/slab") && chdir("/sys/slab")) fatal("SYSFS support for SLUB not active\n"); dir = opendir("."); diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 082d1ee154a9..f71f66584ed3 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -640,8 +640,8 @@ S: Maintained ASYNCHRONOUS TRANSFERS/TRANSFORMS API P: Dan Williams M: dan.j.williams@intel.com -P: Shannon Nelson -M: shannon.nelson@intel.com +P: Maciej Sosnowski +M: maciej.sosnowski@intel.com L: linux-kernel@vger.kernel.org W: http://sourceforge.net/projects/xscaleiop S: Supported @@ -1324,8 +1324,7 @@ P: David Teigland M: teigland@redhat.com L: cluster-devel@redhat.com W: http://sources.redhat.com/cluster/ -T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git -T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git +T: git kernel.org:/pub/scm/linux/kernel/git/teigland/dlm.git S: Supported DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER @@ -1335,8 +1334,8 @@ L: netdev@vger.kernel.org S: Maintained DMA GENERIC OFFLOAD ENGINE SUBSYSTEM -P: Shannon Nelson -M: shannon.nelson@intel.com +P: Maciej Sosnowski +M: maciej.sosnowski@intel.com P: Dan Williams M: dan.j.williams@intel.com L: linux-kernel@vger.kernel.org @@ -2014,8 +2013,8 @@ M: tigran@aivazian.fsnet.co.uk S: Maintained INTEL I/OAT DMA DRIVER -P: Shannon Nelson -M: shannon.nelson@intel.com +P: Maciej Sosnowski +M: maciej.sosnowski@intel.com L: linux-kernel@vger.kernel.org S: Supported @@ -4262,7 +4261,7 @@ S: Maintained VT8231 HARDWARE MONITOR DRIVER P: Roger Lucas -M: roger@planbit.co.uk +M: vt8231@hiddenengine.co.uk L: lm-sensors@lm-sensors.org S: Maintained diff --git a/trunk/arch/arm/mach-orion/ts209-setup.c b/trunk/arch/arm/mach-orion/ts209-setup.c index 306dbcd1e37b..b8cfe6813e9d 100644 --- a/trunk/arch/arm/mach-orion/ts209-setup.c +++ b/trunk/arch/arm/mach-orion/ts209-setup.c @@ -192,9 +192,13 @@ static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { /***************************************************************************** * RTC S35390A on I2C bus ****************************************************************************/ + +#define TS209_RTC_GPIO 3 + static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { .driver_name = "rtc-s35390a", .addr = 0x30, + .irq = 0, }; /**************************************************************************** @@ -328,7 +332,18 @@ static void __init qnap_ts209_init(void) platform_add_devices(qnap_ts209_devices, ARRAY_SIZE(qnap_ts209_devices)); + + /* Get RTC IRQ and register the chip */ + if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { + if (gpio_direction_input(TS209_RTC_GPIO) == 0) + qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); + else + gpio_free(TS209_RTC_GPIO); + } + if (qnap_ts209_i2c_rtc.irq == 0) + pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); + orion_eth_init(&qnap_ts209_eth_data); orion_sata_init(&qnap_ts209_sata_data); } diff --git a/trunk/arch/arm/mach-pxa/clock.c b/trunk/arch/arm/mach-pxa/clock.c index 83ef5ecaf432..df5ae2710ab1 100644 --- a/trunk/arch/arm/mach-pxa/clock.c +++ b/trunk/arch/arm/mach-pxa/clock.c @@ -23,18 +23,27 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clocks_lock); +static struct clk *clk_lookup(struct device *dev, const char *id) +{ + struct clk *p; + + list_for_each_entry(p, &clocks, node) + if (strcmp(id, p->name) == 0 && p->dev == dev) + return p; + + return NULL; +} + struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && - (p->dev == NULL || p->dev == dev)) { - clk = p; - break; - } - } + p = clk_lookup(dev, id); + if (!p) + p = clk_lookup(NULL, id); + if (p) + clk = p; mutex_unlock(&clocks_mutex); return clk; diff --git a/trunk/arch/arm/mach-pxa/cpu-pxa.c b/trunk/arch/arm/mach-pxa/cpu-pxa.c index cbc583beedc8..939a3867f77c 100644 --- a/trunk/arch/arm/mach-pxa/cpu-pxa.c +++ b/trunk/arch/arm/mach-pxa/cpu-pxa.c @@ -134,7 +134,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, struct cpufreq_frequency_table *pxa_freqs_table; pxa_freqs_t *pxa_freq_settings; struct cpufreq_freqs freqs; - int idx; + unsigned int idx; unsigned long flags; unsigned int unused, preset_mdrefr, postset_mdrefr; void *ramstart = phys_to_virt(0xa0000000); @@ -233,6 +233,11 @@ static int pxa_set_target(struct cpufreq_policy *policy, return 0; } +static unsigned int pxa_cpufreq_get(unsigned int cpu) +{ + return get_clk_frequency_khz(0); +} + static int pxa_cpufreq_init(struct cpufreq_policy *policy) { int i; @@ -269,6 +274,7 @@ static struct cpufreq_driver pxa_cpufreq_driver = { .verify = pxa_verify_policy, .target = pxa_set_target, .init = pxa_cpufreq_init, + .get = pxa_cpufreq_get, .name = "PXA25x", }; diff --git a/trunk/arch/powerpc/boot/Makefile b/trunk/arch/powerpc/boot/Makefile index 63d07ccbb9db..e3993a607584 100644 --- a/trunk/arch/powerpc/boot/Makefile +++ b/trunk/arch/powerpc/boot/Makefile @@ -35,10 +35,10 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt -$(obj)/4xx.o: BOOTCFLAGS += -mcpu=440 -$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 -$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 -$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 +$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 +$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 diff --git a/trunk/arch/powerpc/boot/dts/bamboo.dts b/trunk/arch/powerpc/boot/dts/bamboo.dts index 29f1a6f3e373..7dc37c9a7446 100644 --- a/trunk/arch/powerpc/boot/dts/bamboo.dts +++ b/trunk/arch/powerpc/boot/dts/bamboo.dts @@ -185,7 +185,6 @@ }; IIC0: i2c@ef600700 { - device_type = "i2c"; compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -193,7 +192,6 @@ }; IIC1: i2c@ef600800 { - device_type = "i2c"; compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -201,7 +199,6 @@ }; ZMII0: emac-zmii@ef600d00 { - device_type = "zmii-interface"; compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; reg = ; }; diff --git a/trunk/arch/powerpc/boot/dts/ebony.dts b/trunk/arch/powerpc/boot/dts/ebony.dts index 7aad135a44b0..0b000cb7ed8b 100644 --- a/trunk/arch/powerpc/boot/dts/ebony.dts +++ b/trunk/arch/powerpc/boot/dts/ebony.dts @@ -216,7 +216,6 @@ IIC0: i2c@40000400 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000400 14>; interrupt-parent = <&UIC0>; @@ -224,7 +223,6 @@ }; IIC1: i2c@40000500 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000500 14>; interrupt-parent = <&UIC0>; diff --git a/trunk/arch/powerpc/boot/dts/katmai.dts b/trunk/arch/powerpc/boot/dts/katmai.dts index 9bdfc0ff3c24..bc32ac7250ec 100644 --- a/trunk/arch/powerpc/boot/dts/katmai.dts +++ b/trunk/arch/powerpc/boot/dts/katmai.dts @@ -187,7 +187,6 @@ }; IIC0: i2c@10000400 { - device_type = "i2c"; compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; reg = <10000400 14>; interrupt-parent = <&UIC0>; @@ -195,7 +194,6 @@ }; IIC1: i2c@10000500 { - device_type = "i2c"; compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; reg = <10000500 14>; interrupt-parent = <&UIC0>; diff --git a/trunk/arch/powerpc/boot/dts/kilauea.dts b/trunk/arch/powerpc/boot/dts/kilauea.dts index 67c7ea179a07..8baef61f31cd 100644 --- a/trunk/arch/powerpc/boot/dts/kilauea.dts +++ b/trunk/arch/powerpc/boot/dts/kilauea.dts @@ -182,7 +182,6 @@ }; IIC0: i2c@ef600400 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -190,7 +189,6 @@ }; IIC1: i2c@ef600500 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -199,7 +197,6 @@ RGMII0: emac-rgmii@ef600b00 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = ; has-mdio; diff --git a/trunk/arch/powerpc/boot/dts/makalu.dts b/trunk/arch/powerpc/boot/dts/makalu.dts index bdd70e4596ae..710c01168179 100644 --- a/trunk/arch/powerpc/boot/dts/makalu.dts +++ b/trunk/arch/powerpc/boot/dts/makalu.dts @@ -182,7 +182,6 @@ }; IIC0: i2c@ef600400 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -190,7 +189,6 @@ }; IIC1: i2c@ef600500 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -199,7 +197,6 @@ RGMII0: emac-rgmii@ef600b00 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = ; has-mdio; diff --git a/trunk/arch/powerpc/boot/dts/rainier.dts b/trunk/arch/powerpc/boot/dts/rainier.dts index d3c2ac394ce9..f947c75a2e94 100644 --- a/trunk/arch/powerpc/boot/dts/rainier.dts +++ b/trunk/arch/powerpc/boot/dts/rainier.dts @@ -229,7 +229,6 @@ }; IIC0: i2c@ef600700 { - device_type = "i2c"; compatible = "ibm,iic-440grx", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -237,7 +236,6 @@ }; IIC1: i2c@ef600800 { - device_type = "i2c"; compatible = "ibm,iic-440grx", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -245,13 +243,11 @@ }; ZMII0: emac-zmii@ef600d00 { - device_type = "zmii-interface"; compatible = "ibm,zmii-440grx", "ibm,zmii"; reg = ; }; RGMII0: emac-rgmii@ef601000 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-440grx", "ibm,rgmii"; reg = ; has-mdio; diff --git a/trunk/arch/powerpc/boot/dts/sequoia.dts b/trunk/arch/powerpc/boot/dts/sequoia.dts index 5c13d46f441d..8db9515d7dc3 100644 --- a/trunk/arch/powerpc/boot/dts/sequoia.dts +++ b/trunk/arch/powerpc/boot/dts/sequoia.dts @@ -244,7 +244,6 @@ }; IIC0: i2c@ef600700 { - device_type = "i2c"; compatible = "ibm,iic-440epx", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -252,7 +251,6 @@ }; IIC1: i2c@ef600800 { - device_type = "i2c"; compatible = "ibm,iic-440epx", "ibm,iic"; reg = ; interrupt-parent = <&UIC0>; @@ -260,13 +258,11 @@ }; ZMII0: emac-zmii@ef600d00 { - device_type = "zmii-interface"; compatible = "ibm,zmii-440epx", "ibm,zmii"; reg = ; }; RGMII0: emac-rgmii@ef601000 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-440epx", "ibm,rgmii"; reg = ; has-mdio; diff --git a/trunk/arch/powerpc/boot/dts/taishan.dts b/trunk/arch/powerpc/boot/dts/taishan.dts index 0706a4a13b9f..8278068c802c 100644 --- a/trunk/arch/powerpc/boot/dts/taishan.dts +++ b/trunk/arch/powerpc/boot/dts/taishan.dts @@ -203,7 +203,6 @@ IIC0: i2c@40000400 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000400 14>; interrupt-parent = <&UIC0>; @@ -211,7 +210,6 @@ }; IIC1: i2c@40000500 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000500 14>; interrupt-parent = <&UIC0>; @@ -225,13 +223,11 @@ }; ZMII0: emac-zmii@40000780 { - device_type = "zgmii-interface"; compatible = "ibm,zmii-440gx", "ibm,zmii"; reg = <40000780 c>; }; RGMII0: emac-rgmii@40000790 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii"; reg = <40000790 8>; }; diff --git a/trunk/arch/powerpc/configs/bamboo_defconfig b/trunk/arch/powerpc/configs/bamboo_defconfig index 1ed9afc9b281..c44db554cdc6 100644 --- a/trunk/arch/powerpc/configs/bamboo_defconfig +++ b/trunk/arch/powerpc/configs/bamboo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 10:49:50 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:36:39 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,17 +69,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -92,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -104,6 +108,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -131,13 +142,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -147,8 +160,10 @@ CONFIG_BAMBOO=y # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set +# CONFIG_WARP is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -159,7 +174,6 @@ CONFIG_IBM440EP_ERR42=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -175,13 +189,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -201,8 +220,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="bamboo.dts" CONFIG_ISA_DMA_API=y # @@ -302,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -348,7 +366,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set @@ -357,6 +375,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -385,7 +405,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -414,6 +433,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -438,6 +460,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -450,7 +473,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -473,6 +495,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -518,6 +541,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -566,12 +590,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -596,12 +617,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,8 +662,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -675,7 +696,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -692,10 +712,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -705,7 +721,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -714,6 +730,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -726,9 +743,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -737,6 +754,7 @@ CONFIG_FORCED_INLINING=y CONFIG_DEBUGGER=y # CONFIG_KGDB is not set # CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -749,6 +767,7 @@ CONFIG_DEBUGGER=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -766,6 +785,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -780,11 +802,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/ebony_defconfig b/trunk/arch/powerpc/configs/ebony_defconfig index cf860f166659..07c8d4ce175a 100644 --- a/trunk/arch/powerpc/configs/ebony_defconfig +++ b/trunk/arch/powerpc/configs/ebony_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:16:26 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:50:44 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,11 +93,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,6 +107,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -130,13 +141,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -146,7 +159,9 @@ CONFIG_EBONY=y # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set +# CONFIG_WARP is not set CONFIG_440GP=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -157,8 +172,8 @@ CONFIG_440GP=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +CONFIG_OF_RTC=y # # Kernel options @@ -173,13 +188,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -198,8 +218,6 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="ebony.dts" CONFIG_ISA_DMA_API=y # @@ -299,6 +317,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -335,6 +354,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -420,7 +440,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set @@ -429,6 +449,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -457,7 +479,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -486,6 +507,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -510,6 +534,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -522,7 +547,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -545,6 +569,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -590,6 +615,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -638,12 +664,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -668,12 +691,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -726,8 +747,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -758,7 +781,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -776,7 +798,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -786,7 +807,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -795,6 +816,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -807,15 +829,16 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -828,6 +851,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -845,6 +869,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -859,11 +886,13 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/ep405_defconfig b/trunk/arch/powerpc/configs/ep405_defconfig index 3829c9166256..e24240a9a047 100644 --- a/trunk/arch/powerpc/configs/ep405_defconfig +++ b/trunk/arch/powerpc/configs/ep405_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:17:13 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:50:09 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -64,17 +65,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -88,11 +90,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -100,6 +104,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -127,13 +138,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -145,6 +158,7 @@ CONFIG_EP405=y CONFIG_405GP=y CONFIG_IBM405_ERR77=y CONFIG_IBM405_ERR51=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -155,7 +169,6 @@ CONFIG_IBM405_ERR51=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -171,13 +184,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -196,11 +214,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="ep405.dts" CONFIG_ISA_DMA_API=y # @@ -300,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -336,6 +351,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -423,7 +439,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set @@ -432,6 +448,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -460,7 +478,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -489,6 +506,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -513,6 +533,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -534,7 +555,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -557,6 +577,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -602,6 +623,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -647,6 +669,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -697,10 +720,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -725,16 +744,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -759,12 +771,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -807,8 +817,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -839,7 +851,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -856,10 +867,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -869,7 +876,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -878,6 +885,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -890,15 +898,16 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -911,6 +920,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -928,6 +938,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -942,11 +955,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/kilauea_defconfig b/trunk/arch/powerpc/configs/kilauea_defconfig index 8dca3d451c0e..2f475391f1d1 100644 --- a/trunk/arch/powerpc/configs/kilauea_defconfig +++ b/trunk/arch/powerpc/configs/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 3 14:21:31 2008 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:51:43 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -64,15 +65,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +90,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +104,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,13 +138,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -141,6 +156,7 @@ CONFIG_KILAUEA=y # CONFIG_WALNUT is not set # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set CONFIG_405EX=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -151,7 +167,6 @@ CONFIG_405EX=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -167,13 +182,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -192,11 +212,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="kilauea.dts" CONFIG_ISA_DMA_API=y # @@ -296,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -332,6 +349,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -418,11 +436,12 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -451,7 +470,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -489,7 +507,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -512,6 +529,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -557,6 +575,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -598,6 +617,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -622,12 +642,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -670,8 +688,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -702,7 +722,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -719,7 +738,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -729,7 +747,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -738,6 +756,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -750,15 +769,16 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -771,6 +791,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -788,6 +809,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -802,11 +826,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/makalu_defconfig b/trunk/arch/powerpc/configs/makalu_defconfig index c5db0265e5d8..9ef4d8a312c8 100644 --- a/trunk/arch/powerpc/configs/makalu_defconfig +++ b/trunk/arch/powerpc/configs/makalu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:18:32 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:52:30 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -64,15 +65,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +90,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +104,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,13 +138,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -141,6 +156,7 @@ CONFIG_MAKALU=y # CONFIG_WALNUT is not set # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set CONFIG_405EX=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -151,7 +167,6 @@ CONFIG_405EX=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -167,13 +182,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -192,11 +212,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="kilauea.dts" CONFIG_ISA_DMA_API=y # @@ -296,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -332,6 +349,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -418,11 +436,12 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -451,7 +470,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -489,7 +507,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -512,6 +529,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -557,6 +575,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -598,6 +617,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -622,12 +642,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -670,8 +688,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -702,7 +722,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -719,7 +738,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -729,7 +747,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -738,6 +756,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -750,15 +769,16 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -771,6 +791,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -788,6 +809,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -802,11 +826,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/ppc44x_defconfig b/trunk/arch/powerpc/configs/ppc44x_defconfig new file mode 100644 index 000000000000..57bd775ef777 --- /dev/null +++ b/trunk/arch/powerpc/configs/ppc44x_defconfig @@ -0,0 +1,904 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:57:35 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_BAMBOO=y +CONFIG_EBONY=y +CONFIG_SEQUOIA=y +CONFIG_TAISHAN=y +CONFIG_KATMAI=y +CONFIG_RAINIER=y +CONFIG_WARP=y +CONFIG_440EP=y +CONFIG_440EPX=y +CONFIG_440GRX=y +CONFIG_440GP=y +CONFIG_440GX=y +CONFIG_440SPe=y +CONFIG_IBM440EP_ERR42=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_OF_RTC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_RCU_TRACE is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/rainier_defconfig b/trunk/arch/powerpc/configs/rainier_defconfig index 7b95001a22a8..dec18ca73519 100644 --- a/trunk/arch/powerpc/configs/rainier_defconfig +++ b/trunk/arch/powerpc/configs/rainier_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:22:40 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:53:10 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,11 +93,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,6 +107,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -130,13 +141,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -146,7 +159,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set CONFIG_RAINIER=y +# CONFIG_WARP is not set CONFIG_440GRX=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -157,7 +172,6 @@ CONFIG_440GRX=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -173,13 +187,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -199,8 +218,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="rainier.dts" CONFIG_ISA_DMA_API=y # @@ -300,6 +317,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -336,6 +354,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -422,7 +441,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set @@ -431,6 +450,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -461,7 +482,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_IBM_NEW_EMAC_ZMII=y @@ -472,6 +492,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -496,6 +519,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -508,7 +532,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -531,6 +554,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -576,6 +600,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -624,12 +649,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -654,12 +676,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -712,8 +732,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -744,7 +766,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -762,10 +783,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -775,7 +792,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -784,6 +801,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -796,9 +814,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -807,6 +825,7 @@ CONFIG_FORCED_INLINING=y CONFIG_DEBUGGER=y # CONFIG_KGDB is not set # CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -832,6 +851,7 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -849,6 +869,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -863,11 +886,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/sequoia_defconfig b/trunk/arch/powerpc/configs/sequoia_defconfig index abbfed6582e1..dd5d6303c396 100644 --- a/trunk/arch/powerpc/configs/sequoia_defconfig +++ b/trunk/arch/powerpc/configs/sequoia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:23:22 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:53:46 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,15 +69,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -90,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -102,6 +108,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -129,13 +142,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -145,7 +160,9 @@ CONFIG_SEQUOIA=y # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set +# CONFIG_WARP is not set CONFIG_440EPX=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -156,7 +173,6 @@ CONFIG_440EPX=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -172,13 +188,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -198,8 +219,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="sequoia.dts" CONFIG_ISA_DMA_API=y # @@ -299,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -335,6 +355,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -421,7 +442,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set @@ -430,6 +451,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -458,7 +481,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -487,6 +509,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -511,6 +536,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -523,7 +549,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -546,6 +571,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -591,6 +617,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -639,12 +666,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -669,12 +693,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -727,8 +749,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -759,7 +783,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -777,7 +800,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -787,7 +809,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -796,6 +818,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -808,9 +831,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -819,6 +842,7 @@ CONFIG_FORCED_INLINING=y CONFIG_DEBUGGER=y # CONFIG_KGDB is not set # CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -844,6 +868,7 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -861,6 +886,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -875,11 +903,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/taishan_defconfig b/trunk/arch/powerpc/configs/taishan_defconfig index ade84b92877e..087aedce1338 100644 --- a/trunk/arch/powerpc/configs/taishan_defconfig +++ b/trunk/arch/powerpc/configs/taishan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:23:39 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:40:44 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,11 +93,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,6 +107,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -130,13 +141,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -146,7 +159,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_TAISHAN=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set +# CONFIG_WARP is not set CONFIG_440GX=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -157,7 +172,6 @@ CONFIG_440GX=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -173,13 +187,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -199,8 +218,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="taishan.dts" CONFIG_ISA_DMA_API=y # @@ -300,6 +317,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -346,7 +364,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set @@ -355,6 +373,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -385,7 +405,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -414,6 +433,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -438,6 +460,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -450,7 +473,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -473,6 +495,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -518,6 +541,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -566,12 +590,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -596,12 +617,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,8 +662,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -675,7 +696,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -692,10 +712,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -705,7 +721,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -714,6 +730,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -726,9 +743,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -737,6 +754,7 @@ CONFIG_FORCED_INLINING=y CONFIG_DEBUGGER=y # CONFIG_KGDB is not set # CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -749,6 +767,7 @@ CONFIG_DEBUGGER=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -766,6 +785,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -780,11 +802,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/walnut_defconfig b/trunk/arch/powerpc/configs/walnut_defconfig index e431128e8e9e..3b2689e5002a 100644 --- a/trunk/arch/powerpc/configs/walnut_defconfig +++ b/trunk/arch/powerpc/configs/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:23:58 2007 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:54:12 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -64,17 +65,18 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -88,11 +90,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -100,6 +104,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -127,13 +138,15 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -145,6 +158,7 @@ CONFIG_WALNUT=y CONFIG_405GP=y CONFIG_IBM405_ERR77=y CONFIG_IBM405_ERR51=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -155,8 +169,8 @@ CONFIG_IBM405_ERR51=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +CONFIG_OF_RTC=y # # Kernel options @@ -171,13 +185,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -196,11 +215,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="walnut.dts" CONFIG_ISA_DMA_API=y # @@ -300,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -336,6 +352,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -422,7 +439,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set @@ -431,6 +448,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -459,7 +478,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -488,6 +506,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -512,6 +533,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -524,7 +546,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -547,6 +568,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -592,6 +614,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -640,12 +663,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -670,12 +690,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -718,8 +736,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -750,7 +770,6 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -767,7 +786,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -777,7 +795,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -786,6 +804,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -798,15 +817,16 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -819,6 +839,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -836,6 +857,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -850,11 +874,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/configs/warp_defconfig b/trunk/arch/powerpc/configs/warp_defconfig index 312557b5df53..2313c3e8ef61 100644 --- a/trunk/arch/powerpc/configs/warp_defconfig +++ b/trunk/arch/powerpc/configs/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Tue Jan 8 12:23:23 2008 +# Linux kernel version: 2.6.25-rc2 +# Fri Feb 15 21:54:43 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,17 +69,18 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -92,17 +94,26 @@ CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -130,12 +141,14 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -148,6 +161,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_WARP=y CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -158,7 +172,6 @@ CONFIG_IBM440EP_ERR42=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -174,13 +187,18 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -200,8 +218,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="ip=on" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="warp.dts" CONFIG_ISA_DMA_API=y # @@ -244,6 +260,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -279,12 +296,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set @@ -315,6 +333,7 @@ CONFIG_VLAN_8021Q=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -348,6 +367,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -414,11 +434,11 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_NDFC=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set # @@ -436,12 +456,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -471,7 +493,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -# CONFIG_SCSI_WAIT_SCAN is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -528,7 +550,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -596,7 +617,6 @@ CONFIG_I2C_BOARDINFO=y # # I2C Hardware Bus support # -CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -608,14 +628,12 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -632,7 +650,6 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -668,6 +685,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -675,9 +693,11 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -721,6 +741,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -781,10 +802,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -808,14 +825,6 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set @@ -832,6 +841,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD Host Controller Drivers # # CONFIG_MMC_WBSD is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set @@ -855,12 +865,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -915,8 +923,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -986,7 +996,6 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1004,7 +1013,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1014,7 +1022,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -1035,15 +1043,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1053,5 +1062,49 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set diff --git a/trunk/arch/powerpc/kernel/kprobes.c b/trunk/arch/powerpc/kernel/kprobes.c index 5338e4855712..c176c513566b 100644 --- a/trunk/arch/powerpc/kernel/kprobes.c +++ b/trunk/arch/powerpc/kernel/kprobes.c @@ -274,7 +274,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * - When the probed function returns, this probe * causes the handlers to fire */ -void kretprobe_trampoline_holder(void) +static void __used kretprobe_trampoline_holder(void) { asm volatile(".global kretprobe_trampoline\n" "kretprobe_trampoline:\n" @@ -284,7 +284,8 @@ void kretprobe_trampoline_holder(void) /* * Called when the probe at kretprobe trampoline is hit */ -int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +static int __kprobes trampoline_probe_handler(struct kprobe *p, + struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head, empty_rp; @@ -517,12 +518,12 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void __kprobes jprobe_return(void) +void __used __kprobes jprobe_return(void) { asm volatile("trap" ::: "memory"); } -void __kprobes jprobe_return_end(void) +static void __used __kprobes jprobe_return_end(void) { }; diff --git a/trunk/arch/powerpc/kernel/prom.c b/trunk/arch/powerpc/kernel/prom.c index 8b5efbce8d90..eac97f48b9b8 100644 --- a/trunk/arch/powerpc/kernel/prom.c +++ b/trunk/arch/powerpc/kernel/prom.c @@ -865,12 +865,12 @@ static int __init early_init_dt_scan_root(unsigned long node, return 1; } -static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) +static u64 __init dt_mem_next_cell(int s, cell_t **cellp) { cell_t *p = *cellp; *cellp = p + s; - return of_read_ulong(p, s); + return of_read_number(p, s); } #ifdef CONFIG_PPC_PSERIES @@ -883,8 +883,8 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) static int __init early_init_dt_scan_drconf_memory(unsigned long node) { cell_t *dm, *ls; - unsigned long l, n; - unsigned long base, size, lmb_size, flags; + unsigned long l, n, flags; + u64 base, size, lmb_size; ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l); if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t)) @@ -959,14 +959,15 @@ static int __init early_init_dt_scan_memory(unsigned long node, uname, l, reg[0], reg[1], reg[2], reg[3]); while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - unsigned long base, size; + u64 base, size; base = dt_mem_next_cell(dt_root_addr_cells, ®); size = dt_mem_next_cell(dt_root_size_cells, ®); if (size == 0) continue; - DBG(" - %lx , %lx\n", base, size); + DBG(" - %llx , %llx\n", (unsigned long long)base, + (unsigned long long)size); #ifdef CONFIG_PPC64 if (iommu_is_off) { if (base >= 0x80000000ul) diff --git a/trunk/arch/powerpc/platforms/44x/Kconfig b/trunk/arch/powerpc/platforms/44x/Kconfig index c062c4cbbed5..1bfb2191010a 100644 --- a/trunk/arch/powerpc/platforms/44x/Kconfig +++ b/trunk/arch/powerpc/platforms/44x/Kconfig @@ -61,7 +61,7 @@ config WARP select 440EP help This option enables support for the PIKA Warp(tm) Appliance. The Warp - is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP + is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP stations and trunks. See http://www.pikatechnologies.com/ and follow the "PIKA for Computer @@ -110,17 +110,17 @@ config 440GP config 440GX bool - select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII #test only - select IBM_NEW_EMAC_TAH #test only + select IBM_NEW_EMAC_ZMII #test only + select IBM_NEW_EMAC_TAH #test only config 440SP bool config 440SPe - select IBM_NEW_EMAC_EMAC4 bool + select IBM_NEW_EMAC_EMAC4 # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 diff --git a/trunk/arch/powerpc/platforms/cell/spu_base.c b/trunk/arch/powerpc/platforms/cell/spu_base.c index e45cfa84911f..87eb07f94c5f 100644 --- a/trunk/arch/powerpc/platforms/cell/spu_base.c +++ b/trunk/arch/powerpc/platforms/cell/spu_base.c @@ -160,13 +160,6 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) pr_debug("%s\n", __FUNCTION__); - if (test_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags)) { - /* SLBs are pre-loaded for context switch, so - * we should never get here! - */ - printk("%s: invalid access during switch!\n", __func__); - return 1; - } slb.esid = (ea & ESID_MASK) | SLB_ESID_V; switch(REGION_ID(ea)) { @@ -226,11 +219,6 @@ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) return 0; } - if (test_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags)) { - printk("%s: invalid access during switch!\n", __func__); - return 1; - } - spu->class_0_pending = 0; spu->dar = ea; spu->dsisr = dsisr; diff --git a/trunk/arch/powerpc/platforms/cell/spufs/run.c b/trunk/arch/powerpc/platforms/cell/spufs/run.c index fca22e18069a..6221968c2a3c 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/run.c +++ b/trunk/arch/powerpc/platforms/cell/spufs/run.c @@ -234,6 +234,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc, *npc = ctx->ops->npc_read(ctx); spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); + ctx->policy = SCHED_IDLE; spu_release(ctx); if (signal_pending(current)) diff --git a/trunk/arch/powerpc/platforms/cell/spufs/sched.c b/trunk/arch/powerpc/platforms/cell/spufs/sched.c index 5915343e2599..3a5972117de7 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/sched.c +++ b/trunk/arch/powerpc/platforms/cell/spufs/sched.c @@ -856,21 +856,18 @@ static noinline void spusched_tick(struct spu_context *ctx) { struct spu_context *new = NULL; struct spu *spu = NULL; - u32 status; if (spu_acquire(ctx)) BUG(); /* a kernel thread never has signals pending */ if (ctx->state != SPU_STATE_RUNNABLE) goto out; - if (spu_stopped(ctx, &status)) - goto out; if (ctx->flags & SPU_CREATE_NOSCHED) goto out; if (ctx->policy == SCHED_FIFO) goto out; - if (--ctx->time_slice) + if (--ctx->time_slice && ctx->policy != SCHED_IDLE) goto out; spu = ctx->spu; @@ -880,7 +877,8 @@ static noinline void spusched_tick(struct spu_context *ctx) new = grab_runnable_context(ctx->prio + 1, spu->node); if (new) { spu_unschedule(spu, ctx); - spu_add_to_rq(ctx); + if (ctx->policy != SCHED_IDLE) + spu_add_to_rq(ctx); } else { spu_context_nospu_trace(spusched_tick__newslice, ctx); ctx->time_slice++; diff --git a/trunk/arch/powerpc/platforms/cell/spufs/switch.c b/trunk/arch/powerpc/platforms/cell/spufs/switch.c index 6063c88c26d2..6f5886c7b1f9 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/switch.c +++ b/trunk/arch/powerpc/platforms/cell/spufs/switch.c @@ -720,8 +720,9 @@ static inline void set_switch_active(struct spu_state *csa, struct spu *spu) * Restore, Step 23. * Change the software context switch pending flag * to context switch active. + * + * This implementation does not uses a switch active flag. */ - set_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags); clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags); mb(); } @@ -1739,9 +1740,8 @@ static inline void reset_switch_active(struct spu_state *csa, struct spu *spu) { /* Restore, Step 74: * Reset the "context switch active" flag. + * Not performed by this implementation. */ - clear_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags); - mb(); } static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu) diff --git a/trunk/arch/powerpc/platforms/pasemi/Makefile b/trunk/arch/powerpc/platforms/pasemi/Makefile index 8f52d7515793..ce6d789e0741 100644 --- a/trunk/arch/powerpc/platforms/pasemi/Makefile +++ b/trunk/arch/powerpc/platforms/pasemi/Makefile @@ -1,3 +1,3 @@ -obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o +obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o diff --git a/trunk/arch/powerpc/platforms/pasemi/misc.c b/trunk/arch/powerpc/platforms/pasemi/misc.c new file mode 100644 index 000000000000..ded7d152d00c --- /dev/null +++ b/trunk/arch/powerpc/platforms/pasemi/misc.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Parts based on arch/powerpc/sysdev/fsl_soc.c: + * + * 2006 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#ifdef CONFIG_I2C_BOARDINFO +/* The below is from fsl_soc.c. It's copied because since there are no + * official bus bindings at this time it doesn't make sense to share across + * the platforms, even though they happen to be common. + */ +struct i2c_driver_device { + char *of_device; + char *i2c_driver; + char *i2c_type; +}; + +static struct i2c_driver_device i2c_devices[] __initdata = { + {"dallas,ds1338", "rtc-ds1307", "ds1338"}, +}; + +static int __init find_i2c_driver(struct device_node *node, + struct i2c_board_info *info) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { + if (!of_device_is_compatible(node, i2c_devices[i].of_device)) + continue; + if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver, + KOBJ_NAME_LEN) >= KOBJ_NAME_LEN || + strlcpy(info->type, i2c_devices[i].i2c_type, + I2C_NAME_SIZE) >= I2C_NAME_SIZE) + return -ENOMEM; + return 0; + } + return -ENODEV; +} + +static int __init pasemi_register_i2c_devices(void) +{ + struct pci_dev *pdev; + struct device_node *adap_node; + struct device_node *node; + + pdev = NULL; + while ((pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa003, pdev))) { + adap_node = pci_device_to_OF_node(pdev); + + if (!adap_node) + continue; + + node = NULL; + while ((node = of_get_next_child(adap_node, node))) { + struct i2c_board_info info = {}; + const u32 *addr; + int len; + + addr = of_get_property(node, "reg", &len); + if (!addr || len < sizeof(int) || + *addr > (1 << 10) - 1) { + printk(KERN_WARNING + "pasemi_register_i2c_devices: " + "invalid i2c device entry\n"); + continue; + } + + info.irq = irq_of_parse_and_map(node, 0); + if (info.irq == NO_IRQ) + info.irq = -1; + + if (find_i2c_driver(node, &info) < 0) + continue; + + info.addr = *addr; + + i2c_register_board_info(PCI_FUNC(pdev->devfn), &info, + 1); + } + } + return 0; +} +device_initcall(pasemi_register_i2c_devices); +#endif diff --git a/trunk/arch/powerpc/platforms/pseries/power.c b/trunk/arch/powerpc/platforms/pseries/power.c index e95fc1594c84..6d6266236446 100644 --- a/trunk/arch/powerpc/platforms/pseries/power.c +++ b/trunk/arch/powerpc/platforms/pseries/power.c @@ -75,7 +75,7 @@ core_initcall(pm_init); #else static int __init apo_pm_init(void) { - return (sysfs_create_file(power_kobj, &auto_poweron_attr)); + return (sysfs_create_file(power_kobj, &auto_poweron_attr.attr)); } __initcall(apo_pm_init); #endif diff --git a/trunk/arch/powerpc/sysdev/mpic_pasemi_msi.c b/trunk/arch/powerpc/sysdev/mpic_pasemi_msi.c index d6bfda30ac87..33cbfb22ce3e 100644 --- a/trunk/arch/powerpc/sysdev/mpic_pasemi_msi.c +++ b/trunk/arch/powerpc/sysdev/mpic_pasemi_msi.c @@ -95,7 +95,6 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) unsigned int virq; struct msi_desc *entry; struct msi_msg msg; - u64 addr; pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n", pdev, nvec, type); @@ -132,8 +131,8 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) set_irq_chip(virq, &mpic_pasemi_msi_chip); set_irq_type(virq, IRQ_TYPE_EDGE_RISING); - pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%lx) addr 0x%lx\n", - virq, hwirq, addr); + pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%lx) addr 0x%x\n", + virq, hwirq, msg.address_lo); /* Likewise, the device writes [0...511] into the target * register to generate MSI [512...1023] diff --git a/trunk/arch/ppc/platforms/4xx/ibm440ep.c b/trunk/arch/ppc/platforms/4xx/ibm440ep.c index 1fed6638c81f..0de91532aabb 100644 --- a/trunk/arch/ppc/platforms/4xx/ibm440ep.c +++ b/trunk/arch/ppc/platforms/4xx/ibm440ep.c @@ -172,11 +172,11 @@ struct ocp_def core_ocp[] = { /* Polarity and triggering settings for internal interrupt sources */ struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { { .polarity = 0xffbffe03, - .triggering = 0xfffffe00, + .triggering = 0x00000000, .ext_irq_mask = 0x000001fc, /* IRQ0 - IRQ6 */ }, - { .polarity = 0xffffc6ef, - .triggering = 0xffffc7ff, + { .polarity = 0xffffc6af, + .triggering = 0x06000140, .ext_irq_mask = 0x00003800, /* IRQ7 - IRQ9 */ }, }; diff --git a/trunk/arch/x86/Kconfig b/trunk/arch/x86/Kconfig index 3be2305709b7..4a88cf7695b4 100644 --- a/trunk/arch/x86/Kconfig +++ b/trunk/arch/x86/Kconfig @@ -1054,7 +1054,7 @@ config SECCOMP config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on X86_64 && EXPERIMENTAL + depends on X86_64 && EXPERIMENTAL && BROKEN help This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of critical functions, a canary diff --git a/trunk/arch/x86/kernel/acpi/boot.c b/trunk/arch/x86/kernel/acpi/boot.c index 680b7300a489..2cdc9de9371d 100644 --- a/trunk/arch/x86/kernel/acpi/boot.c +++ b/trunk/arch/x86/kernel/acpi/boot.c @@ -72,7 +72,8 @@ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return #define PREFIX "ACPI: " int acpi_noirq; /* skip ACPI IRQ initialization */ -int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ +int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */ +EXPORT_SYMBOL(acpi_pci_disabled); int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; diff --git a/trunk/arch/x86/kernel/ptrace.c b/trunk/arch/x86/kernel/ptrace.c index 702c33efea84..d862e396b099 100644 --- a/trunk/arch/x86/kernel/ptrace.c +++ b/trunk/arch/x86/kernel/ptrace.c @@ -1160,7 +1160,7 @@ static int genregs32_set(struct task_struct *target, if (kbuf) { const compat_ulong_t *k = kbuf; while (count > 0 && !ret) { - ret = putreg(target, pos, *k++); + ret = putreg32(target, pos, *k++); count -= sizeof(*k); pos += sizeof(*k); } @@ -1171,7 +1171,7 @@ static int genregs32_set(struct task_struct *target, ret = __get_user(word, u++); if (ret) break; - ret = putreg(target, pos, word); + ret = putreg32(target, pos, word); count -= sizeof(*u); pos += sizeof(*u); } diff --git a/trunk/arch/x86/mm/pageattr.c b/trunk/arch/x86/mm/pageattr.c index e2a74ea11a53..464d8fc21ce6 100644 --- a/trunk/arch/x86/mm/pageattr.c +++ b/trunk/arch/x86/mm/pageattr.c @@ -899,7 +899,24 @@ void kernel_map_pages(struct page *page, int numpages, int enable) */ cpa_fill_pool(); } -#endif + +#ifdef CONFIG_HIBERNATION + +bool kernel_page_present(struct page *page) +{ + unsigned int level; + pte_t *pte; + + if (PageHighMem(page)) + return false; + + pte = lookup_address((unsigned long)page_address(page), &level); + return (pte_val(*pte) & _PAGE_PRESENT); +} + +#endif /* CONFIG_HIBERNATION */ + +#endif /* CONFIG_DEBUG_PAGEALLOC */ /* * The testcases use internal knowledge of the implementation that shouldn't diff --git a/trunk/arch/x86/pci/irq.c b/trunk/arch/x86/pci/irq.c index ed07ce6c171b..a8715861877e 100644 --- a/trunk/arch/x86/pci/irq.c +++ b/trunk/arch/x86/pci/irq.c @@ -583,6 +583,10 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH9_4: case PCI_DEVICE_ID_INTEL_ICH9_5: case PCI_DEVICE_ID_INTEL_TOLAPAI_0: + case PCI_DEVICE_ID_INTEL_ICH10_0: + case PCI_DEVICE_ID_INTEL_ICH10_1: + case PCI_DEVICE_ID_INTEL_ICH10_2: + case PCI_DEVICE_ID_INTEL_ICH10_3: r->name = "PIIX/ICH"; r->get = pirq_piix_get; r->set = pirq_piix_set; diff --git a/trunk/drivers/acpi/Kconfig b/trunk/drivers/acpi/Kconfig index f688c214be0c..fbcaa069be86 100644 --- a/trunk/drivers/acpi/Kconfig +++ b/trunk/drivers/acpi/Kconfig @@ -283,24 +283,23 @@ config ACPI_TOSHIBA If you have a legacy free Toshiba laptop (such as the Libretto L1 series), say Y. -config ACPI_CUSTOM_DSDT - bool "Include Custom DSDT" +config ACPI_CUSTOM_DSDT_FILE + string "Custom DSDT Table file to include" + default "" depends on !STANDALONE - default n help This option supports a custom DSDT by linking it into the kernel. See Documentation/acpi/dsdt-override.txt - If unsure, say N. - -config ACPI_CUSTOM_DSDT_FILE - string "Custom DSDT Table file to include" - depends on ACPI_CUSTOM_DSDT - default "" - help Enter the full path name to the file which includes the AmlCode declaration. + If unsure, don't enter a file name. + +config ACPI_CUSTOM_DSDT + bool + default ACPI_CUSTOM_DSDT_FILE != "" + config ACPI_CUSTOM_DSDT_INITRD bool "Read Custom DSDT from initramfs" depends on BLK_DEV_INITRD diff --git a/trunk/drivers/acpi/ec.c b/trunk/drivers/acpi/ec.c index 7222a18a0319..caf873c14bfb 100644 --- a/trunk/drivers/acpi/ec.c +++ b/trunk/drivers/acpi/ec.c @@ -943,7 +943,11 @@ int __init acpi_ec_ecdt_probe(void) boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; boot_ec->gpe = ecdt_ptr->gpe; - boot_ec->handle = ACPI_ROOT_OBJECT; + if (ACPI_FAILURE(acpi_get_handle(NULL, ecdt_ptr->id, + &boot_ec->handle))) { + pr_info("Failed to locate handle for boot EC\n"); + boot_ec->handle = ACPI_ROOT_OBJECT; + } } else { /* This workaround is needed only on some broken machines, * which require early EC, but fail to provide ECDT */ diff --git a/trunk/drivers/acpi/executer/exregion.c b/trunk/drivers/acpi/executer/exregion.c index 2e9ce94798c7..3f51b7e84a17 100644 --- a/trunk/drivers/acpi/executer/exregion.c +++ b/trunk/drivers/acpi/executer/exregion.c @@ -338,6 +338,7 @@ acpi_ex_pci_config_space_handler(u32 function, acpi_status status = AE_OK; struct acpi_pci_id *pci_id; u16 pci_register; + u32 value32; ACPI_FUNCTION_TRACE(ex_pci_config_space_handler); @@ -364,9 +365,9 @@ acpi_ex_pci_config_space_handler(u32 function, switch (function) { case ACPI_READ: - *value = 0; status = acpi_os_read_pci_configuration(pci_id, pci_register, - value, bit_width); + &value32, bit_width); + *value = value32; break; case ACPI_WRITE: diff --git a/trunk/drivers/acpi/fan.c b/trunk/drivers/acpi/fan.c index 48cb705b274a..c8e3cba423ef 100644 --- a/trunk/drivers/acpi/fan.c +++ b/trunk/drivers/acpi/fan.c @@ -256,22 +256,28 @@ static int acpi_fan_add(struct acpi_device *device) cdev = thermal_cooling_device_register("Fan", device, &fan_cooling_ops); - if (cdev) + if (IS_ERR(cdev)) { + result = PTR_ERR(cdev); + goto end; + } + if (cdev) { printk(KERN_INFO PREFIX "%s is registered as cooling_device%d\n", device->dev.bus_id, cdev->id); - else - goto end; - acpi_driver_data(device) = cdev; - result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj, - "thermal_cooling"); - if (result) - return result; - result = sysfs_create_link(&cdev->device.kobj, &device->dev.kobj, - "device"); - if (result) - return result; + acpi_driver_data(device) = cdev; + result = sysfs_create_link(&device->dev.kobj, + &cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + + result = sysfs_create_link(&cdev->device.kobj, + &device->dev.kobj, + "device"); + if (result) + return result; + } result = acpi_fan_add_fs(device); if (result) diff --git a/trunk/drivers/acpi/pci_root.c b/trunk/drivers/acpi/pci_root.c index c3fed31166b5..f14ff1ffab29 100644 --- a/trunk/drivers/acpi/pci_root.c +++ b/trunk/drivers/acpi/pci_root.c @@ -184,7 +184,7 @@ static void acpi_pci_bridge_scan(struct acpi_device *device) } } -static int __devinit acpi_pci_root_add(struct acpi_device *device) +static int acpi_pci_root_add(struct acpi_device *device) { int result = 0; struct acpi_pci_root *root = NULL; diff --git a/trunk/drivers/acpi/processor_core.c b/trunk/drivers/acpi/processor_core.c index d3cc07fa4480..a3cc8a98255c 100644 --- a/trunk/drivers/acpi/processor_core.c +++ b/trunk/drivers/acpi/processor_core.c @@ -670,21 +670,26 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) pr->cdev = thermal_cooling_device_register("Processor", device, &processor_cooling_ops); - if (pr->cdev) + if (IS_ERR(pr->cdev)) { + result = PTR_ERR(pr->cdev); + goto end; + } + if (pr->cdev) { printk(KERN_INFO PREFIX "%s is registered as cooling_device%d\n", device->dev.bus_id, pr->cdev->id); - else - goto end; - result = sysfs_create_link(&device->dev.kobj, &pr->cdev->device.kobj, - "thermal_cooling"); - if (result) - return result; - result = sysfs_create_link(&pr->cdev->device.kobj, &device->dev.kobj, - "device"); - if (result) - return result; + result = sysfs_create_link(&device->dev.kobj, + &pr->cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + result = sysfs_create_link(&pr->cdev->device.kobj, + &device->dev.kobj, + "device"); + if (result) + return result; + } if (pr->flags.throttling) { printk(KERN_INFO PREFIX "%s [%s] (supports", @@ -809,10 +814,12 @@ static int acpi_processor_remove(struct acpi_device *device, int type) acpi_processor_remove_fs(device); - sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); - sysfs_remove_link(&pr->cdev->device.kobj, "device"); - thermal_cooling_device_unregister(pr->cdev); - pr->cdev = NULL; + if (pr->cdev) { + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + thermal_cooling_device_unregister(pr->cdev); + pr->cdev = NULL; + } processors[pr->id] = NULL; @@ -826,8 +833,6 @@ static int acpi_processor_remove(struct acpi_device *device, int type) * Acpi processor hotplug support * ****************************************************************************/ -static int is_processor_present(acpi_handle handle); - static int is_processor_present(acpi_handle handle) { acpi_status status; @@ -881,8 +886,8 @@ int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device) return 0; } -static void __ref acpi_processor_hotplug_notify(acpi_handle handle, - u32 event, void *data) +static void +acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data) { struct acpi_processor *pr; struct acpi_device *device = NULL; diff --git a/trunk/drivers/acpi/processor_idle.c b/trunk/drivers/acpi/processor_idle.c index 980e1c33e6c5..6f3b217699e9 100644 --- a/trunk/drivers/acpi/processor_idle.c +++ b/trunk/drivers/acpi/processor_idle.c @@ -364,7 +364,7 @@ int acpi_processor_resume(struct acpi_device * device) return 0; } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) static int tsc_halts_in_c(int state) { switch (boot_cpu_data.x86_vendor) { @@ -544,7 +544,7 @@ static void acpi_processor_idle(void) /* Get end time (ticks) */ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC halts in C2, so notify users */ if (tsc_halts_in_c(ACPI_STATE_C2)) mark_tsc_unstable("possible TSC halt in C2"); @@ -609,7 +609,7 @@ static void acpi_processor_idle(void) acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC halts in C3, so notify users */ if (tsc_halts_in_c(ACPI_STATE_C3)) mark_tsc_unstable("TSC halts in C3"); @@ -1500,7 +1500,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, acpi_idle_do_entry(cx); t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC could halt in idle, so notify users */ if (tsc_halts_in_c(cx->type)) mark_tsc_unstable("TSC halts in idle");; @@ -1614,7 +1614,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, spin_unlock(&c3_lock); } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC) +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC could halt in idle, so notify users */ if (tsc_halts_in_c(ACPI_STATE_C3)) mark_tsc_unstable("TSC halts in idle"); diff --git a/trunk/drivers/acpi/utils.c b/trunk/drivers/acpi/utils.c index 34f157571080..eba55b7d6c95 100644 --- a/trunk/drivers/acpi/utils.c +++ b/trunk/drivers/acpi/utils.c @@ -36,16 +36,20 @@ ACPI_MODULE_NAME("utils"); /* -------------------------------------------------------------------------- Object Evaluation Helpers -------------------------------------------------------------------------- */ +static void +acpi_util_eval_error(acpi_handle h, acpi_string p, acpi_status s) +{ #ifdef ACPI_DEBUG_OUTPUT -#define acpi_util_eval_error(h,p,s) {\ - char prefix[80] = {'\0'};\ - struct acpi_buffer buffer = {sizeof(prefix), prefix};\ - acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer);\ - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluate [%s.%s]: %s\n",\ - (char *) prefix, p, acpi_format_exception(s))); } + char prefix[80] = {'\0'}; + struct acpi_buffer buffer = {sizeof(prefix), prefix}; + acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluate [%s.%s]: %s\n", + (char *) prefix, p, acpi_format_exception(s))); #else -#define acpi_util_eval_error(h,p,s) + return; #endif +} + acpi_status acpi_extract_package(union acpi_object *package, struct acpi_buffer *format, struct acpi_buffer *buffer) diff --git a/trunk/drivers/acpi/video.c b/trunk/drivers/acpi/video.c index 7f714fa2a454..12cce69b5441 100644 --- a/trunk/drivers/acpi/video.c +++ b/trunk/drivers/acpi/video.c @@ -731,6 +731,9 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cdev = thermal_cooling_device_register("LCD", device->dev, &video_cooling_ops); + if (IS_ERR(device->cdev)) + return; + if (device->cdev) { printk(KERN_INFO PREFIX "%s is registered as cooling_device%d\n", diff --git a/trunk/drivers/base/bus.c b/trunk/drivers/base/bus.c index 055989e94799..2d207ad30336 100644 --- a/trunk/drivers/base/bus.c +++ b/trunk/drivers/base/bus.c @@ -658,9 +658,10 @@ int bus_add_driver(struct device_driver *drv) pr_debug("bus: '%s': add driver %s\n", bus->name, drv->name); priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - + if (!priv) { + error = -ENOMEM; + goto out_put_bus; + } klist_init(&priv->klist_devices, NULL, NULL); priv->driver = drv; drv->p = priv; @@ -668,7 +669,7 @@ int bus_add_driver(struct device_driver *drv) error = kobject_init_and_add(&priv->kobj, &driver_ktype, NULL, "%s", drv->name); if (error) - goto out_put_bus; + goto out_unregister; if (drv->bus->p->drivers_autoprobe) { error = driver_attach(drv); diff --git a/trunk/drivers/base/driver.c b/trunk/drivers/base/driver.c index ba75184c653c..bf31a0170a48 100644 --- a/trunk/drivers/base/driver.c +++ b/trunk/drivers/base/driver.c @@ -120,6 +120,9 @@ EXPORT_SYMBOL_GPL(driver_remove_file); /** * driver_add_kobj - add a kobject below the specified driver + * @drv: requesting device driver + * @kobj: kobject to add below this driver + * @fmt: format string that names the kobject * * You really don't want to do this, this is only here due to one looney * iseries driver, go poke those developers if you are annoyed about diff --git a/trunk/drivers/base/power/main.c b/trunk/drivers/base/power/main.c index bdc03f7e8424..ee9d1c8db0d6 100644 --- a/trunk/drivers/base/power/main.c +++ b/trunk/drivers/base/power/main.c @@ -415,7 +415,7 @@ EXPORT_SYMBOL_GPL(device_power_down); * @dev: Device. * @state: Power state device is entering. */ -int suspend_device(struct device *dev, pm_message_t state) +static int suspend_device(struct device *dev, pm_message_t state) { int error = 0; @@ -479,7 +479,6 @@ static int dpm_suspend(pm_message_t state) mutex_lock(&dpm_list_mtx); if (list_empty(&dev->power.entry)) list_add(&dev->power.entry, &dpm_locked); - mutex_unlock(&dpm_list_mtx); break; } mutex_lock(&dpm_list_mtx); @@ -523,6 +522,7 @@ static void lock_all_devices(void) /** * device_suspend - Save state and stop all devices in system. + * @state: new power management state * * Prevent new devices from being registered, then lock all devices * and suspend them. diff --git a/trunk/drivers/block/xen-blkfront.c b/trunk/drivers/block/xen-blkfront.c index 8afce67c0aa5..9c6f3f99208d 100644 --- a/trunk/drivers/block/xen-blkfront.c +++ b/trunk/drivers/block/xen-blkfront.c @@ -37,6 +37,7 @@ #include #include +#include #include #include @@ -135,6 +136,22 @@ static void blkif_restart_queue_callback(void *arg) schedule_work(&info->work); } +int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg) +{ + /* We don't have real geometry info, but let's at least return + values consistent with the size of the device */ + sector_t nsect = get_capacity(bd->bd_disk); + sector_t cylinders = nsect; + + hg->heads = 0xff; + hg->sectors = 0x3f; + sector_div(cylinders, hg->heads * hg->sectors); + hg->cylinders = cylinders; + if ((sector_t)(hg->cylinders + 1) * hg->heads * hg->sectors < nsect) + hg->cylinders = 0xffff; + return 0; +} + /* * blkif_queue_request * @@ -937,6 +954,7 @@ static struct block_device_operations xlvbd_block_fops = .owner = THIS_MODULE, .open = blkif_open, .release = blkif_release, + .getgeo = blkif_getgeo, }; diff --git a/trunk/drivers/char/drm/i915_drv.c b/trunk/drivers/char/drm/i915_drv.c index 4048f39b7eed..b2b451dc4460 100644 --- a/trunk/drivers/char/drm/i915_drv.c +++ b/trunk/drivers/char/drm/i915_drv.c @@ -222,6 +222,7 @@ static void i915_restore_vga(struct drm_device *dev) dev_priv->saveGR[0x18]); /* Attribute controller registers */ + inb(st01); for (i = 0; i < 20; i++) i915_write_ar(st01, i, dev_priv->saveAR[i], 0); inb(st01); /* switch back to index mode */ diff --git a/trunk/drivers/cpufreq/cpufreq.c b/trunk/drivers/cpufreq/cpufreq.c index 64926aa990db..89a29cd93783 100644 --- a/trunk/drivers/cpufreq/cpufreq.c +++ b/trunk/drivers/cpufreq/cpufreq.c @@ -1006,14 +1006,6 @@ static int __cpufreq_remove_dev (struct sys_device * sys_dev) } #endif - - if (!kobject_get(&data->kobj)) { - spin_unlock_irqrestore(&cpufreq_driver_lock, flags); - cpufreq_debug_enable_ratelimit(); - unlock_policy_rwsem_write(cpu); - return -EFAULT; - } - #ifdef CONFIG_SMP #ifdef CONFIG_HOTPLUG_CPU diff --git a/trunk/drivers/hwmon/Kconfig b/trunk/drivers/hwmon/Kconfig index 410ffe4e9d80..368879ff5d8c 100644 --- a/trunk/drivers/hwmon/Kconfig +++ b/trunk/drivers/hwmon/Kconfig @@ -143,6 +143,16 @@ config SENSORS_ADT7470 This driver can also be built as a module. If so, the module will be called adt7470. +config SENSORS_ADT7473 + tristate "Analog Devices ADT7473" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7473 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7473. + config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on X86 && PCI && EXPERIMENTAL diff --git a/trunk/drivers/hwmon/Makefile b/trunk/drivers/hwmon/Makefile index 824161337f1c..3bdb05a5cbd7 100644 --- a/trunk/drivers/hwmon/Makefile +++ b/trunk/drivers/hwmon/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o +obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_AMS) += ams/ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o diff --git a/trunk/drivers/hwmon/ad7418.c b/trunk/drivers/hwmon/ad7418.c index fcd7fe78f3f9..466b9ee92797 100644 --- a/trunk/drivers/hwmon/ad7418.c +++ b/trunk/drivers/hwmon/ad7418.c @@ -26,7 +26,7 @@ #define DRV_VERSION "0.3" /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_3(ad7416, ad7417, ad7418); diff --git a/trunk/drivers/hwmon/adm1021.c b/trunk/drivers/hwmon/adm1021.c index b96be772e498..ecbf69484bf5 100644 --- a/trunk/drivers/hwmon/adm1021.c +++ b/trunk/drivers/hwmon/adm1021.c @@ -31,10 +31,8 @@ /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { + 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, diff --git a/trunk/drivers/hwmon/adm1025.c b/trunk/drivers/hwmon/adm1025.c index e96c3725203d..1d76de7d75c7 100644 --- a/trunk/drivers/hwmon/adm1025.c +++ b/trunk/drivers/hwmon/adm1025.c @@ -62,7 +62,7 @@ * NE1619 has two possible addresses: 0x2c and 0x2d. */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/adm1026.c b/trunk/drivers/hwmon/adm1026.c index 8002f68240c4..904c6ce9d83f 100644 --- a/trunk/drivers/hwmon/adm1026.c +++ b/trunk/drivers/hwmon/adm1026.c @@ -35,7 +35,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(adm1026); @@ -1624,6 +1624,7 @@ static struct attribute *adm1026_attributes_temp3[] = { &dev_attr_temp3_crit_enable.attr, &dev_attr_temp3_auto_point1_pwm.attr, &dev_attr_temp3_auto_point2_pwm.attr, + NULL }; static const struct attribute_group adm1026_group_temp3 = { @@ -1639,6 +1640,7 @@ static struct attribute *adm1026_attributes_in8_9[] = { &sensor_dev_attr_in9_max.dev_attr.attr, &sensor_dev_attr_in9_min.dev_attr.attr, &sensor_dev_attr_in9_alarm.dev_attr.attr, + NULL }; static const struct attribute_group adm1026_group_in8_9 = { diff --git a/trunk/drivers/hwmon/adm1029.c b/trunk/drivers/hwmon/adm1029.c index 0bc897dffa27..2c6608d453c2 100644 --- a/trunk/drivers/hwmon/adm1029.c +++ b/trunk/drivers/hwmon/adm1029.c @@ -39,10 +39,8 @@ * Addresses to scan */ -static unsigned short normal_i2c[] = { - 0x28, 0x29, 0x2a, - 0x2b, 0x2c, 0x2d, - 0x2e, 0x2f, I2C_CLIENT_END +static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, + 0x2e, 0x2f, I2C_CLIENT_END }; /* diff --git a/trunk/drivers/hwmon/adm1031.c b/trunk/drivers/hwmon/adm1031.c index 5aaad3636c98..2bffcab7dc9f 100644 --- a/trunk/drivers/hwmon/adm1031.c +++ b/trunk/drivers/hwmon/adm1031.c @@ -61,7 +61,7 @@ #define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan)) /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(adm1030, adm1031); diff --git a/trunk/drivers/hwmon/adm9240.c b/trunk/drivers/hwmon/adm9240.c index 7671d2bf7800..149ef25252e7 100644 --- a/trunk/drivers/hwmon/adm9240.c +++ b/trunk/drivers/hwmon/adm9240.c @@ -52,7 +52,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; /* Insmod parameters */ diff --git a/trunk/drivers/hwmon/ads7828.c b/trunk/drivers/hwmon/ads7828.c index 6b8a73ef404c..ed71a8bc70dc 100644 --- a/trunk/drivers/hwmon/ads7828.c +++ b/trunk/drivers/hwmon/ads7828.c @@ -44,7 +44,7 @@ #define ADS7828_INT_VREF_MV 2500 /* Internal vref is 2.5V, 2500mV */ /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; /* Insmod parameters */ diff --git a/trunk/drivers/hwmon/adt7470.c b/trunk/drivers/hwmon/adt7470.c index 747693ab2ff1..6b5325f33a2c 100644 --- a/trunk/drivers/hwmon/adt7470.c +++ b/trunk/drivers/hwmon/adt7470.c @@ -30,7 +30,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(adt7470); diff --git a/trunk/drivers/hwmon/adt7473.c b/trunk/drivers/hwmon/adt7473.c new file mode 100644 index 000000000000..9587869bdba0 --- /dev/null +++ b/trunk/drivers/hwmon/adt7473.c @@ -0,0 +1,1157 @@ +/* + * A hwmon driver for the Analog Devices ADT7473 + * Copyright (C) 2007 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x2C, 0x2D, 0x2E, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7473); + +/* ADT7473 registers */ +#define ADT7473_REG_BASE_ADDR 0x20 + +#define ADT7473_REG_VOLT_BASE_ADDR 0x21 +#define ADT7473_REG_VOLT_MAX_ADDR 0x22 +#define ADT7473_REG_VOLT_MIN_BASE_ADDR 0x46 +#define ADT7473_REG_VOLT_MIN_MAX_ADDR 0x49 + +#define ADT7473_REG_TEMP_BASE_ADDR 0x25 +#define ADT7473_REG_TEMP_MAX_ADDR 0x27 +#define ADT7473_REG_TEMP_LIMITS_BASE_ADDR 0x4E +#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR 0x53 +#define ADT7473_REG_TEMP_TMIN_BASE_ADDR 0x67 +#define ADT7473_REG_TEMP_TMIN_MAX_ADDR 0x69 +#define ADT7473_REG_TEMP_TMAX_BASE_ADDR 0x6A +#define ADT7473_REG_TEMP_TMAX_MAX_ADDR 0x6C + +#define ADT7473_REG_FAN_BASE_ADDR 0x28 +#define ADT7473_REG_FAN_MAX_ADDR 0x2F +#define ADT7473_REG_FAN_MIN_BASE_ADDR 0x54 +#define ADT7473_REG_FAN_MIN_MAX_ADDR 0x5B + +#define ADT7473_REG_PWM_BASE_ADDR 0x30 +#define ADT7473_REG_PWM_MAX_ADDR 0x32 +#define ADT7473_REG_PWM_MIN_BASE_ADDR 0x64 +#define ADT7473_REG_PWM_MIN_MAX_ADDR 0x66 +#define ADT7473_REG_PWM_MAX_BASE_ADDR 0x38 +#define ADT7473_REG_PWM_MAX_MAX_ADDR 0x3A +#define ADT7473_REG_PWM_BHVR_BASE_ADDR 0x5C +#define ADT7473_REG_PWM_BHVR_MAX_ADDR 0x5E +#define ADT7473_PWM_BHVR_MASK 0xE0 +#define ADT7473_PWM_BHVR_SHIFT 5 + +#define ADT7473_REG_CFG1 0x40 +#define ADT7473_CFG1_START 0x01 +#define ADT7473_CFG1_READY 0x04 +#define ADT7473_REG_CFG2 0x73 +#define ADT7473_REG_CFG3 0x78 +#define ADT7473_REG_CFG4 0x7D +#define ADT7473_CFG4_MAX_DUTY_AT_OVT 0x08 +#define ADT7473_REG_CFG5 0x7C +#define ADT7473_CFG5_TEMP_TWOS 0x01 +#define ADT7473_CFG5_TEMP_OFFSET 0x02 + +#define ADT7473_REG_DEVICE 0x3D +#define ADT7473_VENDOR 0x41 +#define ADT7473_REG_VENDOR 0x3E +#define ADT7473_DEVICE 0x73 +#define ADT7473_REG_REVISION 0x3F +#define ADT7473_REV_68 0x68 +#define ADT7473_REV_69 0x69 + +#define ADT7473_REG_ALARM1 0x41 +#define ADT7473_VCCP_ALARM 0x02 +#define ADT7473_VCC_ALARM 0x04 +#define ADT7473_R1T_ALARM 0x10 +#define ADT7473_LT_ALARM 0x20 +#define ADT7473_R2T_ALARM 0x40 +#define ADT7473_OOL 0x80 +#define ADT7473_REG_ALARM2 0x42 +#define ADT7473_OVT_ALARM 0x02 +#define ADT7473_FAN1_ALARM 0x04 +#define ADT7473_FAN2_ALARM 0x08 +#define ADT7473_FAN3_ALARM 0x10 +#define ADT7473_FAN4_ALARM 0x20 +#define ADT7473_R1T_SHORT 0x40 +#define ADT7473_R2T_SHORT 0x80 +#define ADT7473_REG_MAX_ADDR 0x80 + +#define ALARM2(x) ((x) << 8) + +#define ADT7473_VOLT_COUNT 2 +#define ADT7473_REG_VOLT(x) (ADT7473_REG_VOLT_BASE_ADDR + (x)) +#define ADT7473_REG_VOLT_MIN(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + ((x) * 2)) +#define ADT7473_REG_VOLT_MAX(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + \ + ((x) * 2) + 1) + +#define ADT7473_TEMP_COUNT 3 +#define ADT7473_REG_TEMP(x) (ADT7473_REG_TEMP_BASE_ADDR + (x)) +#define ADT7473_REG_TEMP_MIN(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2)) +#define ADT7473_REG_TEMP_MAX(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + \ + ((x) * 2) + 1) +#define ADT7473_REG_TEMP_TMIN(x) (ADT7473_REG_TEMP_TMIN_BASE_ADDR + (x)) +#define ADT7473_REG_TEMP_TMAX(x) (ADT7473_REG_TEMP_TMAX_BASE_ADDR + (x)) + +#define ADT7473_FAN_COUNT 4 +#define ADT7473_REG_FAN(x) (ADT7473_REG_FAN_BASE_ADDR + ((x) * 2)) +#define ADT7473_REG_FAN_MIN(x) (ADT7473_REG_FAN_MIN_BASE_ADDR + ((x) * 2)) + +#define ADT7473_PWM_COUNT 3 +#define ADT7473_REG_PWM(x) (ADT7473_REG_PWM_BASE_ADDR + (x)) +#define ADT7473_REG_PWM_MAX(x) (ADT7473_REG_PWM_MAX_BASE_ADDR + (x)) +#define ADT7473_REG_PWM_MIN(x) (ADT7473_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7473_REG_PWM_BHVR(x) (ADT7473_REG_PWM_BHVR_BASE_ADDR + (x)) + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +struct adt7473_data { + struct i2c_client client; + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 volt[ADT7473_VOLT_COUNT]; + s8 volt_min[ADT7473_VOLT_COUNT]; + s8 volt_max[ADT7473_VOLT_COUNT]; + + s8 temp[ADT7473_TEMP_COUNT]; + s8 temp_min[ADT7473_TEMP_COUNT]; + s8 temp_max[ADT7473_TEMP_COUNT]; + s8 temp_tmin[ADT7473_TEMP_COUNT]; + /* This is called the !THERM limit in the datasheet */ + s8 temp_tmax[ADT7473_TEMP_COUNT]; + + u16 fan[ADT7473_FAN_COUNT]; + u16 fan_min[ADT7473_FAN_COUNT]; + + u8 pwm[ADT7473_PWM_COUNT]; + u8 pwm_max[ADT7473_PWM_COUNT]; + u8 pwm_min[ADT7473_PWM_COUNT]; + u8 pwm_behavior[ADT7473_PWM_COUNT]; + + u8 temp_twos_complement; + u8 temp_offset; + + u16 alarm; + u8 max_duty_at_overheat; +}; + +static int adt7473_attach_adapter(struct i2c_adapter *adapter); +static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind); +static int adt7473_detach_client(struct i2c_client *client); + +static struct i2c_driver adt7473_driver = { + .driver = { + .name = "adt7473", + }, + .attach_adapter = adt7473_attach_adapter, + .detach_client = adt7473_detach_client, +}; + +/* + * 16-bit registers on the ADT7473 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7473_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +static inline int adt7473_write_word_data(struct i2c_client *client, u8 reg, + u16 value) +{ + return i2c_smbus_write_byte_data(client, reg, value & 0xFF) + && i2c_smbus_write_byte_data(client, reg + 1, value >> 8); +} + +static void adt7473_init_client(struct i2c_client *client) +{ + int reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG1); + + if (!(reg & ADT7473_CFG1_READY)) { + dev_err(&client->dev, "Chip not ready.\n"); + } else { + /* start monitoring */ + i2c_smbus_write_byte_data(client, ADT7473_REG_CFG1, + reg | ADT7473_CFG1_START); + } +} + +static struct adt7473_data *adt7473_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + u8 cfg; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7473_VOLT_COUNT; i++) + data->volt[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_VOLT(i)); + + /* Determine temperature encoding */ + cfg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG5); + data->temp_twos_complement = (cfg & ADT7473_CFG5_TEMP_TWOS); + + /* + * What does this do? it implies a variable temperature sensor + * offset, but the datasheet doesn't say anything about this bit + * and other parts of the datasheet imply that "offset64" mode + * means that you shift temp values by -64 if the above bit was set. + */ + data->temp_offset = (cfg & ADT7473_CFG5_TEMP_OFFSET); + + for (i = 0; i < ADT7473_TEMP_COUNT; i++) + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_TEMP(i)); + + for (i = 0; i < ADT7473_FAN_COUNT; i++) + data->fan[i] = adt7473_read_word_data(client, + ADT7473_REG_FAN(i)); + + for (i = 0; i < ADT7473_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_PWM(i)); + + data->alarm = i2c_smbus_read_byte_data(client, ADT7473_REG_ALARM1); + if (data->alarm & ADT7473_OOL) + data->alarm |= ALARM2(i2c_smbus_read_byte_data(client, + ADT7473_REG_ALARM2)); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7473_VOLT_COUNT; i++) { + data->volt_min[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_VOLT_MIN(i)); + data->volt_max[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_VOLT_MAX(i)); + } + + for (i = 0; i < ADT7473_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_TEMP_MIN(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_TEMP_MAX(i)); + data->temp_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_TEMP_TMIN(i)); + data->temp_tmax[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_TEMP_TMAX(i)); + } + + for (i = 0; i < ADT7473_FAN_COUNT; i++) + data->fan_min[i] = adt7473_read_word_data(client, + ADT7473_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7473_PWM_COUNT; i++) { + data->pwm_max[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_PWM_MAX(i)); + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_PWM_MIN(i)); + data->pwm_behavior[i] = i2c_smbus_read_byte_data(client, + ADT7473_REG_PWM_BHVR(i)); + } + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +/* + * On this chip, voltages are given as a count of steps between a minimum + * and maximum voltage, not a direct voltage. + */ +static const int volt_convert_table[][2] = { + {2997, 3}, + {4395, 4}, +}; + +static int decode_volt(int volt_index, u8 raw) +{ + int cmax = volt_convert_table[volt_index][0]; + int cmin = volt_convert_table[volt_index][1]; + return ((raw * (cmax - cmin)) / 255) + cmin; +} + +static u8 encode_volt(int volt_index, int cooked) +{ + int cmax = volt_convert_table[volt_index][0]; + int cmin = volt_convert_table[volt_index][1]; + u8 x; + + if (cooked > cmax) + cooked = cmax; + else if (cooked < cmin) + cooked = cmin; + + x = ((cooked - cmin) * 255) / (cmax - cmin); + + return x; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", + decode_volt(attr->index, data->volt_min[attr->index])); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + + mutex_lock(&data->lock); + data->volt_min[attr->index] = volt; + i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MIN(attr->index), + volt); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", + decode_volt(attr->index, data->volt_max[attr->index])); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + + mutex_lock(&data->lock); + data->volt_max[attr->index] = volt; + i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MAX(attr->index), + volt); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + + return sprintf(buf, "%d\n", + decode_volt(attr->index, data->volt[attr->index])); +} + +/* + * This chip can report temperature data either as a two's complement + * number in the range -128 to 127, or as an unsigned number that must + * be offset by 64. + */ +static int decode_temp(struct adt7473_data *data, u8 raw) +{ + if (data->temp_twos_complement) + return (s8)raw; + return raw - 64; +} + +static u8 encode_temp(struct adt7473_data *data, int cooked) +{ + if (data->temp_twos_complement) + return (cooked & 0xFF); + return cooked + 64; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", + 1000 * decode_temp(data, data->temp_min[attr->index])); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10) / 1000; + temp = encode_temp(data, temp); + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", + 1000 * decode_temp(data, data->temp_max[attr->index])); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10) / 1000; + temp = encode_temp(data, temp); + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MAX(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", + 1000 * decode_temp(data, data->temp[attr->index])); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + + if (FAN_DATA_VALID(data->fan_min[attr->index])) + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan_min[attr->index])); + else + return sprintf(buf, "0\n"); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10); + + if (!temp) + return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + adt7473_write_word_data(client, ADT7473_REG_FAN_MIN(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + + if (FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); + else + return sprintf(buf, "0\n"); +} + +static ssize_t show_max_duty_at_crit(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", data->max_duty_at_overheat); +} + +static ssize_t set_max_duty_at_crit(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + u8 reg; + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10); + temp = temp && 0xFF; + + mutex_lock(&data->lock); + data->max_duty_at_overheat = temp; + reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); + if (temp) + reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT; + else + reg &= ~ADT7473_CFG4_MAX_DUTY_AT_OVT; + i2c_smbus_write_byte_data(client, ADT7473_REG_CFG4, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7473_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max[attr->index]); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->lock); + data->pwm_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MAX(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", + 1000 * decode_temp(data, data->temp_tmax[attr->index])); +} + +static ssize_t set_temp_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10) / 1000; + temp = encode_temp(data, temp); + + mutex_lock(&data->lock); + data->temp_tmax[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMAX(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + return sprintf(buf, "%d\n", + 1000 * decode_temp(data, data->temp_tmin[attr->index])); +} + +static ssize_t set_temp_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10) / 1000; + temp = encode_temp(data, temp); + + mutex_lock(&data->lock); + data->temp_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_enable(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + + switch (data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT) { + case 3: + return sprintf(buf, "0\n"); + case 7: + return sprintf(buf, "1\n"); + default: + return sprintf(buf, "2\n"); + } +} + +static ssize_t set_pwm_enable(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + u8 reg; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10); + + switch (temp) { + case 0: + temp = 3; + break; + case 1: + temp = 7; + break; + case 2: + /* Enter automatic mode with fans off */ + temp = 4; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, + ADT7473_REG_PWM_BHVR(attr->index)); + reg = (temp << ADT7473_PWM_BHVR_SHIFT) | + (reg & ~ADT7473_PWM_BHVR_MASK); + i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index), + reg); + data->pwm_behavior[attr->index] = reg; + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + int bhvr = data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT; + + switch (bhvr) { + case 3: + case 4: + case 7: + return sprintf(buf, "0\n"); + case 0: + case 1: + case 5: + case 6: + return sprintf(buf, "%d\n", bhvr + 1); + case 2: + return sprintf(buf, "4\n"); + } + /* shouldn't ever get here */ + BUG(); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + u8 reg; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7473_data *data = i2c_get_clientdata(client); + int temp = simple_strtol(buf, NULL, 10); + + switch (temp) { + case 1: + case 2: + case 6: + case 7: + temp--; + break; + case 0: + temp = 4; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, + ADT7473_REG_PWM_BHVR(attr->index)); + reg = (temp << ADT7473_PWM_BHVR_SHIFT) | + (reg & ~ADT7473_PWM_BHVR_MASK); + i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index), + reg); + data->pwm_behavior[attr->index] = reg; + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7473_data *data = adt7473_update_device(dev); + + if (data->alarm & attr->index) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_volt, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_volt, NULL, 1); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7473_VCCP_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7473_VCC_ALARM); + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7473_R1T_ALARM | ALARM2(ADT7473_R1T_SHORT)); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7473_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7473_R2T_ALARM | ALARM2(ADT7473_R2T_SHORT)); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ALARM2(ADT7473_FAN1_ALARM)); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ALARM2(ADT7473_FAN2_ALARM)); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ALARM2(ADT7473_FAN3_ALARM)); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ALARM2(ADT7473_FAN4_ALARM)); + +static SENSOR_DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO, + show_max_duty_at_crit, set_max_duty_at_crit, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_temp_tmin, set_temp_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_temp_tmin, set_temp_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_temp_tmin, set_temp_tmin, 2); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_temp_tmax, set_temp_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_temp_tmax, set_temp_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_temp_tmax, set_temp_tmax, 2); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + set_pwm_enable, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + set_pwm_enable, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + set_pwm_enable, 2); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); + +static struct attribute *adt7473_attr[] = +{ + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + + &sensor_dev_attr_pwm_use_point2_pwm_at_crit.dev_attr.attr, + + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + + NULL +}; + +static int adt7473_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, adt7473_detect); +} + +static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct adt7473_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + client = &data->client; + client->addr = address; + client->adapter = adapter; + client->driver = &adt7473_driver; + + i2c_set_clientdata(client, data); + + mutex_init(&data->lock); + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR); + if (vendor != ADT7473_VENDOR) { + err = -ENODEV; + goto exit_free; + } + + device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE); + if (device != ADT7473_DEVICE) { + err = -ENODEV; + goto exit_free; + } + + revision = i2c_smbus_read_byte_data(client, + ADT7473_REG_REVISION); + if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) { + err = -ENODEV; + goto exit_free; + } + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(client->name, "adt7473", I2C_NAME_SIZE); + + err = i2c_attach_client(client); + if (err) + goto exit_free; + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Initialize the ADT7473 chip */ + adt7473_init_client(client); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7473_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_detach; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_detach: + i2c_detach_client(client); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7473_detach_client(struct i2c_client *client) +{ + struct adt7473_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + i2c_detach_client(client); + kfree(data); + return 0; +} + +static int __init adt7473_init(void) +{ + return i2c_add_driver(&adt7473_driver); +} + +static void __exit adt7473_exit(void) +{ + i2c_del_driver(&adt7473_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ADT7473 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7473_init); +module_exit(adt7473_exit); diff --git a/trunk/drivers/hwmon/applesmc.c b/trunk/drivers/hwmon/applesmc.c index 0c94770b7f83..aacc0c4b809c 100644 --- a/trunk/drivers/hwmon/applesmc.c +++ b/trunk/drivers/hwmon/applesmc.c @@ -84,12 +84,15 @@ static const char* temperature_sensors_sets[][36] = { /* Set 0: Macbook Pro */ { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, -/* Set 1: Macbook set */ +/* Set 1: Macbook2 set */ + { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "TTF0", "Th0H", + "Th0S", "Th1H", NULL }, +/* Set 2: Macbook set */ { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "Th0H", "Th0S", "Th1H", "Ts0P", NULL }, -/* Set 2: Macmini set */ +/* Set 3: Macmini set */ { "TC0D", "TC0P", NULL }, -/* Set 3: Mac Pro (2 x Quad-Core) */ +/* Set 4: Mac Pro (2 x Quad-Core) */ { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P", "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "THTG", "TH0P", "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", @@ -1212,12 +1215,14 @@ static void applesmc_release_accelerometer(void) static __initdata struct dmi_match_data applesmc_dmi_data[] = { /* MacBook Pro: accelerometer, backlight and temperature set 0 */ { .accelerometer = 1, .light = 1, .temperature_set = 0 }, -/* MacBook: accelerometer and temperature set 1 */ +/* MacBook2: accelerometer and temperature set 1 */ { .accelerometer = 1, .light = 0, .temperature_set = 1 }, -/* MacMini: temperature set 2 */ - { .accelerometer = 0, .light = 0, .temperature_set = 2 }, -/* MacPro: temperature set 3 */ +/* MacBook: accelerometer and temperature set 2 */ + { .accelerometer = 1, .light = 0, .temperature_set = 2 }, +/* MacMini: temperature set 3 */ { .accelerometer = 0, .light = 0, .temperature_set = 3 }, +/* MacPro: temperature set 4 */ + { .accelerometer = 0, .light = 0, .temperature_set = 4 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1229,16 +1234,20 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { (void*)&applesmc_dmi_data[0]}, { applesmc_dmi_match, "Apple MacBook", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), - DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, + DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") }, (void*)&applesmc_dmi_data[1]}, + { applesmc_dmi_match, "Apple MacBook", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, + (void*)&applesmc_dmi_data[2]}, { applesmc_dmi_match, "Apple Macmini", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") }, - (void*)&applesmc_dmi_data[2]}, + (void*)&applesmc_dmi_data[3]}, { applesmc_dmi_match, "Apple MacPro2", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, - (void*)&applesmc_dmi_data[3]}, + (void*)&applesmc_dmi_data[4]}, { .ident = NULL } }; diff --git a/trunk/drivers/hwmon/asb100.c b/trunk/drivers/hwmon/asb100.c index 950cea8d1d65..84712a22acea 100644 --- a/trunk/drivers/hwmon/asb100.c +++ b/trunk/drivers/hwmon/asb100.c @@ -49,7 +49,7 @@ #include "lm75.h" /* I2C addresses to scan */ -static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(asb100); diff --git a/trunk/drivers/hwmon/atxp1.c b/trunk/drivers/hwmon/atxp1.c index cce3350e539e..01c17e387f03 100644 --- a/trunk/drivers/hwmon/atxp1.c +++ b/trunk/drivers/hwmon/atxp1.c @@ -42,7 +42,7 @@ MODULE_AUTHOR("Sebastian Witt "); #define ATXP1_VIDMASK 0x1f #define ATXP1_GPIO1MASK 0x0f -static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; I2C_CLIENT_INSMOD_1(atxp1); diff --git a/trunk/drivers/hwmon/coretemp.c b/trunk/drivers/hwmon/coretemp.c index 3ee60d26e3a2..70239acecc8e 100644 --- a/trunk/drivers/hwmon/coretemp.c +++ b/trunk/drivers/hwmon/coretemp.c @@ -38,7 +38,8 @@ #define DRVNAME "coretemp" -typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_LABEL, SHOW_NAME } SHOW; +typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_TTARGET, SHOW_LABEL, + SHOW_NAME } SHOW; /* * Functions declaration @@ -55,6 +56,7 @@ struct coretemp_data { unsigned long last_updated; /* in jiffies */ int temp; int tjmax; + int ttarget; u8 alarm; }; @@ -93,9 +95,10 @@ static ssize_t show_temp(struct device *dev, if (attr->index == SHOW_TEMP) err = data->valid ? sprintf(buf, "%d\n", data->temp) : -EAGAIN; - else + else if (attr->index == SHOW_TJMAX) err = sprintf(buf, "%d\n", data->tjmax); - + else + err = sprintf(buf, "%d\n", data->ttarget); return err; } @@ -103,6 +106,8 @@ static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, SHOW_TEMP); static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, SHOW_TJMAX); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, + SHOW_TTARGET); static DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL); static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL); static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME); @@ -147,6 +152,56 @@ static struct coretemp_data *coretemp_update_device(struct device *dev) return data; } +static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) +{ + /* The 100C is default for both mobile and non mobile CPUs */ + + int tjmax = 100000; + int ismobile = 1; + int err; + u32 eax, edx; + + /* Early chips have no MSR for TjMax */ + + if ((c->x86_model == 0xf) && (c->x86_mask < 4)) { + ismobile = 0; + } + + if ((c->x86_model > 0xe) && (ismobile)) { + + /* Now we can detect the mobile CPU using Intel provided table + http://softwarecommunity.intel.com/Wiki/Mobility/720.htm + For Core2 cores, check MSR 0x17, bit 28 1 = Mobile CPU + */ + + err = rdmsr_safe_on_cpu(id, 0x17, &eax, &edx); + if (err) { + dev_warn(dev, + "Unable to access MSR 0x17, assuming desktop" + " CPU\n"); + ismobile = 0; + } else if (!(eax & 0x10000000)) { + ismobile = 0; + } + } + + if (ismobile) { + + err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx); + if (err) { + dev_warn(dev, + "Unable to access MSR 0xEE, for Tjmax, left" + " at default"); + } else if (eax & 0x40000000) { + tjmax = 85000; + } + } else { + dev_warn(dev, "Using relative temperature scale!\n"); + } + + return tjmax; +} + static int __devinit coretemp_probe(struct platform_device *pdev) { struct coretemp_data *data; @@ -163,8 +218,6 @@ static int __devinit coretemp_probe(struct platform_device *pdev) data->id = pdev->id; data->name = "coretemp"; mutex_init(&data->update_lock); - /* Tjmax default is 100 degrees C */ - data->tjmax = 100000; /* test if we can access the THERM_STATUS MSR */ err = rdmsr_safe_on_cpu(data->id, MSR_IA32_THERM_STATUS, &eax, &edx); @@ -191,40 +244,29 @@ static int __devinit coretemp_probe(struct platform_device *pdev) } } - /* Some processors have Tjmax 85 following magic should detect it - Intel won't disclose the information without signed NDA, but - individuals cannot sign it. Catch(ed) 22. - */ + data->tjmax = adjust_tjmax(c, data->id, &pdev->dev); + platform_set_drvdata(pdev, data); - if (((c->x86_model == 0xf) && (c->x86_mask > 3)) || - (c->x86_model == 0xe)) { - err = rdmsr_safe_on_cpu(data->id, 0xee, &eax, &edx); + /* read the still undocumented IA32_TEMPERATURE_TARGET it exists + on older CPUs but not in this register */ + + if (c->x86_model > 0xe) { + err = rdmsr_safe_on_cpu(data->id, 0x1a2, &eax, &edx); if (err) { - dev_warn(&pdev->dev, - "Unable to access MSR 0xEE, Tjmax left at %d " - "degrees C\n", data->tjmax/1000); - } else if (eax & 0x40000000) { - data->tjmax = 85000; + dev_warn(&pdev->dev, "Unable to read" + " IA32_TEMPERATURE_TARGET MSR\n"); + } else { + data->ttarget = data->tjmax - + (((eax >> 8) & 0xff) * 1000); + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_max.dev_attr); + if (err) + goto exit_free; } } - /* Intel says that above should not work for desktop Core2 processors, - but it seems to work. There is no other way how get the absolute - readings. Warn the user about this. First check if are desktop, - bit 50 of MSR_IA32_PLATFORM_ID should be 0. - */ - - rdmsr_safe_on_cpu(data->id, MSR_IA32_PLATFORM_ID, &eax, &edx); - - if ((c->x86_model == 0xf) && (!(edx & 0x00040000))) { - dev_warn(&pdev->dev, "Using undocumented features, absolute " - "temperature might be wrong!\n"); - } - - platform_set_drvdata(pdev, data); - if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group))) - goto exit_free; + goto exit_dev; data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { @@ -238,6 +280,8 @@ static int __devinit coretemp_probe(struct platform_device *pdev) exit_class: sysfs_remove_group(&pdev->dev.kobj, &coretemp_group); +exit_dev: + device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr); exit_free: kfree(data); exit: @@ -250,6 +294,7 @@ static int __devexit coretemp_remove(struct platform_device *pdev) hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&pdev->dev.kobj, &coretemp_group); + device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr); platform_set_drvdata(pdev, NULL); kfree(data); return 0; @@ -330,7 +375,7 @@ static void coretemp_device_remove(unsigned int cpu) mutex_unlock(&pdev_list_mutex); } -static int coretemp_cpu_callback(struct notifier_block *nfb, +static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long) hcpu; @@ -347,7 +392,7 @@ static int coretemp_cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } -static struct notifier_block coretemp_cpu_notifier = { +static struct notifier_block coretemp_cpu_notifier __refdata = { .notifier_call = coretemp_cpu_callback, }; #endif /* !CONFIG_HOTPLUG_CPU */ @@ -368,10 +413,10 @@ static int __init coretemp_init(void) for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); - /* check if family 6, models e, f, 16 */ + /* check if family 6, models 0xe, 0xf, 0x16, 0x17 */ if ((c->cpuid_level < 0) || (c->x86 != 0x6) || !((c->x86_model == 0xe) || (c->x86_model == 0xf) || - (c->x86_model == 0x16))) { + (c->x86_model == 0x16) || (c->x86_model == 0x17))) { /* supported CPU not found, but report the unknown family 6 CPU */ diff --git a/trunk/drivers/hwmon/dme1737.c b/trunk/drivers/hwmon/dme1737.c index ddddd9f34c19..7673f65877e1 100644 --- a/trunk/drivers/hwmon/dme1737.c +++ b/trunk/drivers/hwmon/dme1737.c @@ -49,7 +49,7 @@ module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); /* Addresses to scan */ -static unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; +static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(dme1737); diff --git a/trunk/drivers/hwmon/ds1621.c b/trunk/drivers/hwmon/ds1621.c index 3f5163de13c1..5f300ffed657 100644 --- a/trunk/drivers/hwmon/ds1621.c +++ b/trunk/drivers/hwmon/ds1621.c @@ -34,7 +34,7 @@ #include "lm75.h" /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; /* Insmod parameters */ diff --git a/trunk/drivers/hwmon/f75375s.c b/trunk/drivers/hwmon/f75375s.c index 6892f76fc18a..1464338e4e11 100644 --- a/trunk/drivers/hwmon/f75375s.c +++ b/trunk/drivers/hwmon/f75375s.c @@ -37,7 +37,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(f75373, f75375); diff --git a/trunk/drivers/hwmon/fscher.c b/trunk/drivers/hwmon/fscher.c index 721c70177b17..ed26b66e0831 100644 --- a/trunk/drivers/hwmon/fscher.c +++ b/trunk/drivers/hwmon/fscher.c @@ -40,7 +40,7 @@ * Addresses to scan */ -static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/fschmd.c b/trunk/drivers/hwmon/fschmd.c index b7c9eef0f928..bd89d270a5ed 100644 --- a/trunk/drivers/hwmon/fschmd.c +++ b/trunk/drivers/hwmon/fschmd.c @@ -44,7 +44,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd); diff --git a/trunk/drivers/hwmon/fscpos.c b/trunk/drivers/hwmon/fscpos.c index 2f1075323a1e..00f48484e54b 100644 --- a/trunk/drivers/hwmon/fscpos.c +++ b/trunk/drivers/hwmon/fscpos.c @@ -43,7 +43,7 @@ /* * Addresses to scan */ -static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/gl518sm.c b/trunk/drivers/hwmon/gl518sm.c index 3b1ac48fce23..33e9e8a8d1ce 100644 --- a/trunk/drivers/hwmon/gl518sm.c +++ b/trunk/drivers/hwmon/gl518sm.c @@ -44,7 +44,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(gl518sm_r00, gl518sm_r80); diff --git a/trunk/drivers/hwmon/gl520sm.c b/trunk/drivers/hwmon/gl520sm.c index 03ecdc334764..8984ef141627 100644 --- a/trunk/drivers/hwmon/gl520sm.c +++ b/trunk/drivers/hwmon/gl520sm.c @@ -39,7 +39,7 @@ module_param(extra_sensor_type, ushort, 0); MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)"); /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(gl520sm); diff --git a/trunk/drivers/hwmon/lm63.c b/trunk/drivers/hwmon/lm63.c index 650b07d5b902..116287008083 100644 --- a/trunk/drivers/hwmon/lm63.c +++ b/trunk/drivers/hwmon/lm63.c @@ -53,7 +53,7 @@ * Address is fully defined internally and cannot be changed. */ -static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/lm75.c b/trunk/drivers/hwmon/lm75.c index e5c35a355a57..115f4090b98e 100644 --- a/trunk/drivers/hwmon/lm75.c +++ b/trunk/drivers/hwmon/lm75.c @@ -31,7 +31,7 @@ /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; /* Insmod parameters */ diff --git a/trunk/drivers/hwmon/lm77.c b/trunk/drivers/hwmon/lm77.c index 459b70ad6bee..36d5a8c3ad8c 100644 --- a/trunk/drivers/hwmon/lm77.c +++ b/trunk/drivers/hwmon/lm77.c @@ -36,7 +36,8 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, + I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(lm77); diff --git a/trunk/drivers/hwmon/lm78.c b/trunk/drivers/hwmon/lm78.c index 0a9eb1f6f4e4..ed7859f0e16a 100644 --- a/trunk/drivers/hwmon/lm78.c +++ b/trunk/drivers/hwmon/lm78.c @@ -37,8 +37,8 @@ static struct platform_device *pdev; /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, - 0x2e, 0x2f, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, + 0x2e, 0x2f, I2C_CLIENT_END }; static unsigned short isa_address = 0x290; /* Insmod parameters */ diff --git a/trunk/drivers/hwmon/lm80.c b/trunk/drivers/hwmon/lm80.c index a2ca055f3922..26c91c9d4769 100644 --- a/trunk/drivers/hwmon/lm80.c +++ b/trunk/drivers/hwmon/lm80.c @@ -32,8 +32,8 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, - 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, + 0x2e, 0x2f, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(lm80); diff --git a/trunk/drivers/hwmon/lm83.c b/trunk/drivers/hwmon/lm83.c index 6e8903a6e902..6a8642fa25fb 100644 --- a/trunk/drivers/hwmon/lm83.c +++ b/trunk/drivers/hwmon/lm83.c @@ -48,10 +48,8 @@ * addresses. */ -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { + 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/lm85.c b/trunk/drivers/hwmon/lm85.c index 4bb0f291a6b8..182fe6a5605f 100644 --- a/trunk/drivers/hwmon/lm85.c +++ b/trunk/drivers/hwmon/lm85.c @@ -35,7 +35,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); diff --git a/trunk/drivers/hwmon/lm87.c b/trunk/drivers/hwmon/lm87.c index 8ee07c5c97a1..e1c183f0aae0 100644 --- a/trunk/drivers/hwmon/lm87.c +++ b/trunk/drivers/hwmon/lm87.c @@ -73,7 +73,7 @@ * LM87 has three possible addresses: 0x2c, 0x2d and 0x2e. */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/lm90.c b/trunk/drivers/hwmon/lm90.c index f7ec95bedbf6..d1a3da3dd8e0 100644 --- a/trunk/drivers/hwmon/lm90.c +++ b/trunk/drivers/hwmon/lm90.c @@ -101,10 +101,8 @@ * 0x4c, 0x4d or 0x4e. */ -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { + 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/lm92.c b/trunk/drivers/hwmon/lm92.c index af5c77d568fe..c31942e08246 100644 --- a/trunk/drivers/hwmon/lm92.c +++ b/trunk/drivers/hwmon/lm92.c @@ -45,13 +45,14 @@ #include #include #include +#include #include #include /* The LM92 and MAX6635 have 2 two-state pins for address selection, resulting in 4 possible addresses. */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, - I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, + I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(lm92); @@ -209,6 +210,14 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input)); } +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct lm92_data *data = lm92_update_device(dev); + return sprintf(buf, "%d\n", (data->temp1_input >> bitnr) & 1); +} + static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL); static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp1_crit, set_temp1_crit); @@ -221,6 +230,9 @@ static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_max, set_temp1_max); static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp1_max_hyst, NULL); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1); /* @@ -297,7 +309,9 @@ static struct attribute *lm92_attributes[] = { &dev_attr_temp1_max.attr, &dev_attr_temp1_max_hyst.attr, &dev_attr_alarms.attr, - + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, NULL }; diff --git a/trunk/drivers/hwmon/lm93.c b/trunk/drivers/hwmon/lm93.c index ea61946a4bf7..5e678f5c883d 100644 --- a/trunk/drivers/hwmon/lm93.c +++ b/trunk/drivers/hwmon/lm93.c @@ -142,7 +142,7 @@ I2C_FUNC_SMBUS_WORD_DATA) /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(lm93); diff --git a/trunk/drivers/hwmon/max1619.c b/trunk/drivers/hwmon/max1619.c index 38a44c3d6cee..7e7267a04544 100644 --- a/trunk/drivers/hwmon/max1619.c +++ b/trunk/drivers/hwmon/max1619.c @@ -32,14 +32,13 @@ #include #include #include +#include #include #include #include -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { + 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; /* * Insmod parameters @@ -161,6 +160,14 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch return sprintf(buf, "%d\n", data->alarms); } +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct max1619_data *data = max1619_update_device(dev); + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); +} + static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, @@ -172,6 +179,10 @@ static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, set_temp_hyst2); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); static struct attribute *max1619_attributes[] = { &dev_attr_temp1_input.attr, @@ -182,6 +193,10 @@ static struct attribute *max1619_attributes[] = { &dev_attr_temp2_crit_hyst.attr, &dev_attr_alarms.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, NULL }; diff --git a/trunk/drivers/hwmon/max6650.c b/trunk/drivers/hwmon/max6650.c index 755570c1f4eb..52d528b76cc3 100644 --- a/trunk/drivers/hwmon/max6650.c +++ b/trunk/drivers/hwmon/max6650.c @@ -44,7 +44,8 @@ * Addresses to scan. There are four disjoint possibilities, by pin config. */ -static unsigned short normal_i2c[] = {0x1b, 0x1f, 0x48, 0x4b, I2C_CLIENT_END}; +static const unsigned short normal_i2c[] = {0x1b, 0x1f, 0x48, 0x4b, + I2C_CLIENT_END}; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/smsc47m1.c b/trunk/drivers/hwmon/smsc47m1.c index 0d7f0c4d06bb..d1b498548736 100644 --- a/trunk/drivers/hwmon/smsc47m1.c +++ b/trunk/drivers/hwmon/smsc47m1.c @@ -198,6 +198,14 @@ static ssize_t get_fan_div(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); } +static ssize_t get_fan_alarm(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + int bitnr = to_sensor_dev_attr(devattr)->index; + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} + static ssize_t get_pwm(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -347,6 +355,8 @@ static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ get_fan_min, set_fan_min, offset - 1); \ static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ get_fan_div, set_fan_div, offset - 1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_alarm, S_IRUGO, get_fan_alarm, \ + NULL, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ get_pwm, set_pwm, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ @@ -374,12 +384,15 @@ static struct attribute *smsc47m1_attributes[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, &sensor_dev_attr_fan2_input.dev_attr.attr, &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, &sensor_dev_attr_fan3_input.dev_attr.attr, &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_div.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, @@ -533,7 +546,9 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) || (err = device_create_file(dev, &sensor_dev_attr_fan1_min.dev_attr)) || (err = device_create_file(dev, - &sensor_dev_attr_fan1_div.dev_attr))) + &sensor_dev_attr_fan1_div.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan1_alarm.dev_attr))) goto error_remove_files; } else dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n"); @@ -544,7 +559,9 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) || (err = device_create_file(dev, &sensor_dev_attr_fan2_min.dev_attr)) || (err = device_create_file(dev, - &sensor_dev_attr_fan2_div.dev_attr))) + &sensor_dev_attr_fan2_div.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan2_alarm.dev_attr))) goto error_remove_files; } else dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n"); @@ -555,7 +572,9 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) || (err = device_create_file(dev, &sensor_dev_attr_fan3_min.dev_attr)) || (err = device_create_file(dev, - &sensor_dev_attr_fan3_div.dev_attr))) + &sensor_dev_attr_fan3_div.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_fan3_alarm.dev_attr))) goto error_remove_files; } else if (data->type == smsc47m2) dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n"); diff --git a/trunk/drivers/hwmon/smsc47m192.c b/trunk/drivers/hwmon/smsc47m192.c index 8b0c188e60f6..3c9db6598ba7 100644 --- a/trunk/drivers/hwmon/smsc47m192.c +++ b/trunk/drivers/hwmon/smsc47m192.c @@ -34,7 +34,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(smsc47m192); diff --git a/trunk/drivers/hwmon/thmc50.c b/trunk/drivers/hwmon/thmc50.c index 04dd7699b3ac..76a3859c3fbe 100644 --- a/trunk/drivers/hwmon/thmc50.c +++ b/trunk/drivers/hwmon/thmc50.c @@ -32,7 +32,7 @@ MODULE_LICENSE("GPL"); /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(thmc50, adm1022); @@ -52,9 +52,9 @@ I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs " */ #define THMC50_REG_INTR 0x41 -const static u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 }; -const static u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C }; -const static u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; +static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 }; +static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C }; +static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; #define THMC50_REG_CONF_nFANOFF 0x20 diff --git a/trunk/drivers/hwmon/via686a.c b/trunk/drivers/hwmon/via686a.c index 2635bba1e3fc..f1ee5e731968 100644 --- a/trunk/drivers/hwmon/via686a.c +++ b/trunk/drivers/hwmon/via686a.c @@ -533,6 +533,24 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch } static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} +static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 15); +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); + static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -557,6 +575,11 @@ static struct attribute *via686a_attributes[] = { &sensor_dev_attr_in2_max.dev_attr.attr, &sensor_dev_attr_in3_max.dev_attr.attr, &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, @@ -567,6 +590,9 @@ static struct attribute *via686a_attributes[] = { &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan2_input.dev_attr.attr, @@ -574,6 +600,8 @@ static struct attribute *via686a_attributes[] = { &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan1_div.dev_attr.attr, &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, &dev_attr_alarms.attr, &dev_attr_name.attr, diff --git a/trunk/drivers/hwmon/vt8231.c b/trunk/drivers/hwmon/vt8231.c index f87661775fe0..5bc57275cae8 100644 --- a/trunk/drivers/hwmon/vt8231.c +++ b/trunk/drivers/hwmon/vt8231.c @@ -2,7 +2,7 @@ vt8231.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 2005 Roger Lucas + Copyright (c) 2005 Roger Lucas Copyright (c) 2002 Mark D. Studebaker Aaron M. Marsh @@ -541,6 +541,28 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct vt8231_data *data = vt8231_update_device(dev); + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); + static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -549,36 +571,42 @@ static ssize_t show_name(struct device *dev, struct device_attribute } static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -static struct attribute *vt8231_attributes_temps[6][4] = { +static struct attribute *vt8231_attributes_temps[6][5] = { { &dev_attr_temp1_input.attr, &dev_attr_temp1_max_hyst.attr, &dev_attr_temp1_max.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, &sensor_dev_attr_temp5_max.dev_attr.attr, + &sensor_dev_attr_temp5_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_temp6_input.dev_attr.attr, &sensor_dev_attr_temp6_max_hyst.dev_attr.attr, &sensor_dev_attr_temp6_max.dev_attr.attr, + &sensor_dev_attr_temp6_alarm.dev_attr.attr, NULL } }; @@ -592,36 +620,42 @@ static const struct attribute_group vt8231_group_temps[6] = { { .attrs = vt8231_attributes_temps[5] }, }; -static struct attribute *vt8231_attributes_volts[6][4] = { +static struct attribute *vt8231_attributes_volts[6][5] = { { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in0_min.dev_attr.attr, &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_in1_input.dev_attr.attr, &sensor_dev_attr_in1_min.dev_attr.attr, &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_in2_input.dev_attr.attr, &sensor_dev_attr_in2_min.dev_attr.attr, &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_in3_input.dev_attr.attr, &sensor_dev_attr_in3_min.dev_attr.attr, &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, NULL }, { &sensor_dev_attr_in4_input.dev_attr.attr, &sensor_dev_attr_in4_min.dev_attr.attr, &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, NULL }, { &dev_attr_in5_input.attr, &dev_attr_in5_min.attr, &dev_attr_in5_max.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, NULL } }; @@ -642,6 +676,8 @@ static struct attribute *vt8231_attributes[] = { &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan1_div.dev_attr.attr, &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, &dev_attr_alarms.attr, &dev_attr_name.attr, NULL @@ -963,7 +999,7 @@ static void __exit sm_vt8231_exit(void) } } -MODULE_AUTHOR("Roger Lucas "); +MODULE_AUTHOR("Roger Lucas "); MODULE_DESCRIPTION("VT8231 sensors"); MODULE_LICENSE("GPL"); diff --git a/trunk/drivers/hwmon/w83781d.c b/trunk/drivers/hwmon/w83781d.c index 7421f6ea53e1..5c85670e2d16 100644 --- a/trunk/drivers/hwmon/w83781d.c +++ b/trunk/drivers/hwmon/w83781d.c @@ -53,8 +53,8 @@ static struct platform_device *pdev; /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, - 0x2e, 0x2f, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, + 0x2e, 0x2f, I2C_CLIENT_END }; static unsigned short isa_address = 0x290; /* Insmod parameters */ diff --git a/trunk/drivers/hwmon/w83791d.c b/trunk/drivers/hwmon/w83791d.c index 85bd21ee3298..85077c4c8039 100644 --- a/trunk/drivers/hwmon/w83791d.c +++ b/trunk/drivers/hwmon/w83791d.c @@ -47,7 +47,8 @@ #define NUMBER_OF_TEMPIN 3 /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, + I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83791d); diff --git a/trunk/drivers/hwmon/w83792d.c b/trunk/drivers/hwmon/w83792d.c index 007449d3e16e..299629d47ed6 100644 --- a/trunk/drivers/hwmon/w83792d.c +++ b/trunk/drivers/hwmon/w83792d.c @@ -46,7 +46,8 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, + I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83792d); diff --git a/trunk/drivers/hwmon/w83793.c b/trunk/drivers/hwmon/w83793.c index 3ba1d6b33473..ee35af93b574 100644 --- a/trunk/drivers/hwmon/w83793.c +++ b/trunk/drivers/hwmon/w83793.c @@ -37,7 +37,8 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, + I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83793); diff --git a/trunk/drivers/hwmon/w83l785ts.c b/trunk/drivers/hwmon/w83l785ts.c index 1d6259d29e74..77f2d482888b 100644 --- a/trunk/drivers/hwmon/w83l785ts.c +++ b/trunk/drivers/hwmon/w83l785ts.c @@ -49,7 +49,7 @@ * Address is fully defined internally and cannot be changed. */ -static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; /* * Insmod parameters diff --git a/trunk/drivers/hwmon/w83l786ng.c b/trunk/drivers/hwmon/w83l786ng.c index 1dbee4fa23ad..41e22ddb568a 100644 --- a/trunk/drivers/hwmon/w83l786ng.c +++ b/trunk/drivers/hwmon/w83l786ng.c @@ -35,7 +35,7 @@ #include /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83l786ng); diff --git a/trunk/drivers/i2c/busses/i2c-pxa.c b/trunk/drivers/i2c/busses/i2c-pxa.c index 2598d29fd7a4..2b557bfd7f70 100644 --- a/trunk/drivers/i2c/busses/i2c-pxa.c +++ b/trunk/drivers/i2c/busses/i2c-pxa.c @@ -138,11 +138,13 @@ static const struct bits icr_bits[] = { PXA_BIT(ICR_UR, "UR", "ur"), }; +#ifdef CONFIG_I2C_PXA_SLAVE static void decode_ICR(unsigned int val) { decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val); printk("\n"); } +#endif static unsigned int i2c_debug = DEBUG; @@ -1122,7 +1124,7 @@ static int __init i2c_adap_pxa_init(void) static void i2c_adap_pxa_exit(void) { - return platform_driver_unregister(&i2c_pxa_driver); + platform_driver_unregister(&i2c_pxa_driver); } MODULE_LICENSE("GPL"); diff --git a/trunk/drivers/ide/ide.c b/trunk/drivers/ide/ide.c index 4a8952a6c3da..477833f0daf5 100644 --- a/trunk/drivers/ide/ide.c +++ b/trunk/drivers/ide/ide.c @@ -1229,7 +1229,7 @@ static int __init ide_setup(char *s) if (!strcmp(s, "ide=reverse")) { ide_scan_direction = 1; printk(" : Enabled support for IDE inverse scan order.\n"); - return 1; + goto obsolete_option; } #endif diff --git a/trunk/drivers/misc/Kconfig b/trunk/drivers/misc/Kconfig index 1abc95ca9dfa..982e27b86d10 100644 --- a/trunk/drivers/misc/Kconfig +++ b/trunk/drivers/misc/Kconfig @@ -258,6 +258,23 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. +config THINKPAD_ACPI_VIDEO + bool "Video output control support" + depends on THINKPAD_ACPI + default y + ---help--- + Allows the thinkpad_acpi driver to provide an interface to control + the various video output ports. + + This feature often won't work well, depending on ThinkPad model, + display state, video output devices in use, whether there is a X + server running, phase of the moon, and the current mood of + Schroedinger's cat. If you can use X.org's RandR to control + your ThinkPad's video output ports instead of this feature, + don't think twice: do it and say N here to save some memory. + + If you are not sure, say Y here. + config THINKPAD_ACPI_HOTKEY_POLL bool "Suport NVRAM polling for hot keys" depends on THINKPAD_ACPI diff --git a/trunk/drivers/misc/acer-wmi.c b/trunk/drivers/misc/acer-wmi.c index cdc733b77fe3..74d12b4a3abd 100644 --- a/trunk/drivers/misc/acer-wmi.c +++ b/trunk/drivers/misc/acer-wmi.c @@ -271,6 +271,15 @@ static struct dmi_system_id acer_quirks[] = { }, .driver_data = &quirk_acer_travelmate_2490, }, + { + .callback = dmi_matched, + .ident = "Acer TravelMate 4200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4200"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, { .callback = dmi_matched, .ident = "Medion MD 98300", @@ -756,7 +765,7 @@ static struct led_classdev mail_led = { .brightness_set = mail_led_set, }; -static int __devinit acer_led_init(struct device *dev) +static int __init acer_led_init(struct device *dev) { return led_classdev_register(dev, &mail_led); } @@ -789,7 +798,7 @@ static struct backlight_ops acer_bl_ops = { .update_status = update_bl_status, }; -static int __devinit acer_backlight_init(struct device *dev) +static int __init acer_backlight_init(struct device *dev) { struct backlight_device *bd; @@ -808,7 +817,7 @@ static int __devinit acer_backlight_init(struct device *dev) return 0; } -static void acer_backlight_exit(void) +static void __exit acer_backlight_exit(void) { backlight_device_unregister(acer_backlight_device); } diff --git a/trunk/drivers/misc/intel_menlow.c b/trunk/drivers/misc/intel_menlow.c index f70984ab1e1b..de16e88eb8d3 100644 --- a/trunk/drivers/misc/intel_menlow.c +++ b/trunk/drivers/misc/intel_menlow.c @@ -170,10 +170,13 @@ static int intel_menlow_memory_add(struct acpi_device *device) cdev = thermal_cooling_device_register("Memory controller", device, &memory_cooling_ops); - acpi_driver_data(device) = cdev; - if (!cdev) - result = -ENODEV; - else { + if (IS_ERR(cdev)) { + result = PTR_ERR(cdev); + goto end; + } + + if (cdev) { + acpi_driver_data(device) = cdev; result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj, "thermal_cooling"); if (result) diff --git a/trunk/drivers/misc/thinkpad_acpi.c b/trunk/drivers/misc/thinkpad_acpi.c index e2c7edd206a6..bb269d0c677e 100644 --- a/trunk/drivers/misc/thinkpad_acpi.c +++ b/trunk/drivers/misc/thinkpad_acpi.c @@ -221,6 +221,7 @@ static struct { u32 hotkey:1; u32 hotkey_mask:1; u32 hotkey_wlsw:1; + u32 hotkey_tablet:1; u32 light:1; u32 light_status:1; u32 bright_16levels:1; @@ -301,6 +302,13 @@ TPACPI_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "HKEY", /* all others */ ); /* 570 */ +TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + /************************************************************************* * ACPI helpers @@ -1053,6 +1061,9 @@ static struct attribute_set *hotkey_dev_attributes; #define HOTKEY_CONFIG_CRITICAL_END #endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ +/* HKEY.MHKG() return bits */ +#define TP_HOTKEY_TABLET_MASK (1 << 3) + static int hotkey_get_wlsw(int *status) { if (!acpi_evalf(hkey_handle, status, "WLSW", "d")) @@ -1060,6 +1071,16 @@ static int hotkey_get_wlsw(int *status) return 0; } +static int hotkey_get_tablet_mode(int *status) +{ + int s; + + if (!acpi_evalf(hkey_handle, &s, "MHKG", "d")) + return -EIO; + + return ((s & TP_HOTKEY_TABLET_MASK) != 0); +} + /* * Call with hotkey_mutex held */ @@ -1154,15 +1175,31 @@ static void tpacpi_input_send_radiosw(void) { int wlsw; - mutex_lock(&tpacpi_inputdev_send_mutex); - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) { + mutex_lock(&tpacpi_inputdev_send_mutex); + input_report_switch(tpacpi_inputdev, SW_RADIO, !!wlsw); input_sync(tpacpi_inputdev); + + mutex_unlock(&tpacpi_inputdev_send_mutex); } +} + +static void tpacpi_input_send_tabletsw(void) +{ + int state; + + if (tp_features.hotkey_tablet && + !hotkey_get_tablet_mode(&state)) { + mutex_lock(&tpacpi_inputdev_send_mutex); - mutex_unlock(&tpacpi_inputdev_send_mutex); + input_report_switch(tpacpi_inputdev, + SW_TABLET_MODE, !!state); + input_sync(tpacpi_inputdev); + + mutex_unlock(&tpacpi_inputdev_send_mutex); + } } static void tpacpi_input_send_key(unsigned int scancode) @@ -1417,6 +1454,14 @@ static void hotkey_poll_setup_safe(int may_warn) mutex_unlock(&hotkey_mutex); } +#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + +static void hotkey_poll_setup_safe(int __unused) +{ +} + +#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + static int hotkey_inputdev_open(struct input_dev *dev) { switch (tpacpi_lifecycle) { @@ -1444,7 +1489,6 @@ static void hotkey_inputdev_close(struct input_dev *dev) if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING) hotkey_poll_setup_safe(0); } -#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ /* sysfs hotkey enable ------------------------------------------------- */ static ssize_t hotkey_enable_show(struct device *dev, @@ -1666,6 +1710,29 @@ static void hotkey_radio_sw_notify_change(void) "hotkey_radio_sw"); } +/* sysfs hotkey tablet mode (pollable) --------------------------------- */ +static ssize_t hotkey_tablet_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int res, s; + res = hotkey_get_tablet_mode(&s); + if (res < 0) + return res; + + return snprintf(buf, PAGE_SIZE, "%d\n", !!s); +} + +static struct device_attribute dev_attr_hotkey_tablet_mode = + __ATTR(hotkey_tablet_mode, S_IRUGO, hotkey_tablet_mode_show, NULL); + +static void hotkey_tablet_mode_notify_change(void) +{ + if (tp_features.hotkey_tablet) + sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, + "hotkey_tablet_mode"); +} + /* sysfs hotkey report_mode -------------------------------------------- */ static ssize_t hotkey_report_mode_show(struct device *dev, struct device_attribute *attr, @@ -1878,7 +1945,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(12, NULL); + hotkey_dev_attributes = create_attr_set(13, NULL); if (!hotkey_dev_attributes) return -ENOMEM; res = add_many_to_attr_set(hotkey_dev_attributes, @@ -1957,6 +2024,18 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) &dev_attr_hotkey_radio_sw.attr); } + /* For X41t, X60t, X61t Tablets... */ + if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { + tp_features.hotkey_tablet = 1; + printk(TPACPI_INFO + "possible tablet mode switch found; " + "ThinkPad in %s mode\n", + (status & TP_HOTKEY_TABLET_MASK)? + "tablet" : "laptop"); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_tablet_mode.attr); + } + if (!res) res = register_attr_set_with_sysfs( hotkey_dev_attributes, @@ -2006,6 +2085,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) set_bit(EV_SW, tpacpi_inputdev->evbit); set_bit(SW_RADIO, tpacpi_inputdev->swbit); } + if (tp_features.hotkey_tablet) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + } dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); @@ -2023,12 +2106,12 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) (hotkey_report_mode < 2) ? "enabled" : "disabled"); -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL tpacpi_inputdev->open = &hotkey_inputdev_open; tpacpi_inputdev->close = &hotkey_inputdev_close; hotkey_poll_setup_safe(1); -#endif + tpacpi_input_send_radiosw(); + tpacpi_input_send_tabletsw(); } return (tp_features.hotkey)? 0 : 1; @@ -2156,11 +2239,15 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* 0x5000-0x5FFF: human interface helpers */ switch (hkey) { case 0x5010: /* Lenovo new BIOS: brightness changed */ - case 0x5009: /* X61t: swivel up (tablet mode) */ - case 0x500a: /* X61t: swivel down (normal mode) */ case 0x500b: /* X61t: tablet pen inserted into bay */ case 0x500c: /* X61t: tablet pen removed from bay */ break; + case 0x5009: /* X41t-X61t: swivel up (tablet mode) */ + case 0x500a: /* X41t-X61t: swivel down (normal mode) */ + tpacpi_input_send_tabletsw(); + hotkey_tablet_mode_notify_change(); + send_acpi_ev = 0; + break; case 0x5001: case 0x5002: /* LID switch events. Do not propagate */ @@ -2219,11 +2306,10 @@ static void hotkey_resume(void) "from firmware\n"); tpacpi_input_send_radiosw(); hotkey_radio_sw_notify_change(); + hotkey_tablet_mode_notify_change(); hotkey_wakeup_reason_notify_change(); hotkey_wakeup_hotunplug_complete_notify_change(); -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL hotkey_poll_setup_safe(0); -#endif } /* procfs -------------------------------------------------------------- */ @@ -2676,6 +2762,8 @@ static struct ibm_struct wan_driver_data = { * Video subdriver */ +#ifdef CONFIG_THINKPAD_ACPI_VIDEO + enum video_access_mode { TPACPI_VIDEO_NONE = 0, TPACPI_VIDEO_570, /* 570 */ @@ -2703,13 +2791,6 @@ static int video_orig_autosw; static int video_autosw_get(void); static int video_autosw_set(int enable); -TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ - TPACPI_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ static int __init video_init(struct ibm_init_struct *iibm) @@ -3019,6 +3100,8 @@ static struct ibm_struct video_driver_data = { .exit = video_exit, }; +#endif /* CONFIG_THINKPAD_ACPI_VIDEO */ + /************************************************************************* * Light (thinklight) subdriver */ @@ -5803,10 +5886,12 @@ static struct ibm_init_struct ibms_init[] __initdata = { .init = wan_init, .data = &wan_driver_data, }, +#ifdef CONFIG_THINKPAD_ACPI_VIDEO { .init = video_init, .data = &video_driver_data, }, +#endif { .init = light_init, .data = &light_driver_data, @@ -5918,7 +6003,7 @@ MODULE_PARM_DESC(hotkey_report_mode, #define TPACPI_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0); \ - MODULE_PARM_DESC(feature, "Simulates thinkpad-aci procfs command " \ + MODULE_PARM_DESC(feature, "Simulates thinkpad-acpi procfs command " \ "at module load, see documentation") TPACPI_PARAM(hotkey); diff --git a/trunk/drivers/net/ibm_newemac/rgmii.c b/trunk/drivers/net/ibm_newemac/rgmii.c index 9bc1132fa788..5757788227be 100644 --- a/trunk/drivers/net/ibm_newemac/rgmii.c +++ b/trunk/drivers/net/ibm_newemac/rgmii.c @@ -302,7 +302,6 @@ static int __devexit rgmii_remove(struct of_device *ofdev) static struct of_device_id rgmii_match[] = { { - .type = "rgmii-interface", .compatible = "ibm,rgmii", }, { diff --git a/trunk/drivers/pci/hotplug/acpiphp_core.c b/trunk/drivers/pci/hotplug/acpiphp_core.c index c8c263875c21..9279d5ba62e6 100644 --- a/trunk/drivers/pci/hotplug/acpiphp_core.c +++ b/trunk/drivers/pci/hotplug/acpiphp_core.c @@ -392,6 +392,9 @@ static int __init acpiphp_init(void) { info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); + if (acpi_pci_disabled) + return 0; + acpiphp_debug = debug; /* read all the ACPI info from the system */ @@ -401,6 +404,9 @@ static int __init acpiphp_init(void) static void __exit acpiphp_exit(void) { + if (acpi_pci_disabled) + return; + /* deallocate internal data structures etc. */ acpiphp_glue_exit(); } diff --git a/trunk/drivers/pci/hotplug/acpiphp_ibm.c b/trunk/drivers/pci/hotplug/acpiphp_ibm.c index 750ebd7a4c10..b0a22b92717e 100644 --- a/trunk/drivers/pci/hotplug/acpiphp_ibm.c +++ b/trunk/drivers/pci/hotplug/acpiphp_ibm.c @@ -395,33 +395,34 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle, { acpi_handle *phandle = (acpi_handle *)context; acpi_status status; - struct acpi_device_info info; - struct acpi_buffer info_buffer = { - .length = sizeof(struct acpi_device_info), - .pointer = &info, - }; + struct acpi_device_info *info; + struct acpi_buffer info_buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + int retval = 0; status = acpi_get_object_info(handle, &info_buffer); if (ACPI_FAILURE(status)) { - err("%s: Failed to get device information\n", __FUNCTION__); - return 0; + err("%s: Failed to get device information status=0x%x\n", + __FUNCTION__, status); + return retval; } - info.hardware_id.value[sizeof(info.hardware_id.value) - 1] = '\0'; - - if (info.current_status && (info.valid & ACPI_VALID_HID) && - (!strcmp(info.hardware_id.value, IBM_HARDWARE_ID1) || - !strcmp(info.hardware_id.value, IBM_HARDWARE_ID2))) { - dbg("found hardware: %s, handle: %p\n", info.hardware_id.value, - handle); + info = info_buffer.pointer; + info->hardware_id.value[sizeof(info->hardware_id.value) - 1] = '\0'; + + if (info->current_status && (info->valid & ACPI_VALID_HID) && + (!strcmp(info->hardware_id.value, IBM_HARDWARE_ID1) || + !strcmp(info->hardware_id.value, IBM_HARDWARE_ID2))) { + dbg("found hardware: %s, handle: %p\n", + info->hardware_id.value, handle); *phandle = handle; /* returning non-zero causes the search to stop * and returns this value to the caller of * acpi_walk_namespace, but it also causes some warnings * in the acpi debug code to print... */ - return FOUND_APCI; + retval = FOUND_APCI; } - return 0; + kfree(info); + return retval; } static int __init ibm_acpiphp_init(void) diff --git a/trunk/drivers/pci/pci-acpi.c b/trunk/drivers/pci/pci-acpi.c index e569645d59e2..4a23654184fc 100644 --- a/trunk/drivers/pci/pci-acpi.c +++ b/trunk/drivers/pci/pci-acpi.c @@ -158,6 +158,7 @@ acpi_run_osc ( /** * __pci_osc_support_set - register OS support to Firmware * @flags: OS support bits + * @hid: hardware ID * * Update OS support fields and doing a _OSC Query to obtain an update * from Firmware on supported control bits. @@ -241,8 +242,6 @@ EXPORT_SYMBOL(pci_osc_control_set); * choose from highest power _SxD to lowest power _SxW * else // no _PRW at S-state x * choose highest power _SxD or any lower power - * - * currently we simply return _SxD, if present. */ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev, diff --git a/trunk/drivers/pci/proc.c b/trunk/drivers/pci/proc.c index 68aeeb7206de..ef18fcd641e2 100644 --- a/trunk/drivers/pci/proc.c +++ b/trunk/drivers/pci/proc.c @@ -422,7 +422,7 @@ int pci_proc_detach_device(struct pci_dev *dev) struct proc_dir_entry *e; if ((e = dev->procent)) { - if (atomic_read(&e->count)) + if (atomic_read(&e->count) > 1) return -EBUSY; remove_proc_entry(e->name, dev->bus->procdir); dev->procent = NULL; diff --git a/trunk/drivers/pci/quirks.c b/trunk/drivers/pci/quirks.c index 0a953d43b9a2..bbad4a9f264f 100644 --- a/trunk/drivers/pci/quirks.c +++ b/trunk/drivers/pci/quirks.c @@ -867,13 +867,13 @@ static void quirk_disable_pxb(struct pci_dev *pdev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); - -static void __devinit quirk_sb600_sata(struct pci_dev *pdev) +static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) { - /* set sb600 sata to ahci mode */ - if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - u8 tmp; + /* set sb600/sb700/sb800 sata to ahci mode */ + u8 tmp; + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); + if (tmp == 0x01) { pci_read_config_byte(pdev, 0x40, &tmp); pci_write_config_byte(pdev, 0x40, tmp|1); pci_write_config_byte(pdev, 0x9, 1); @@ -881,10 +881,13 @@ static void __devinit quirk_sb600_sata(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x40, tmp); pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; + dev_info(&pdev->dev, "set SATA to AHCI mode\n"); } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_sb600_sata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); /* * Serverworks CSB5 IDE does not fully support native mode @@ -1775,6 +1778,68 @@ static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_msi_ht_cap); +/* + * Force enable MSI mapping capability on HT bridges */ +static inline void ht_enable_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); + + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags | HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} + +static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +{ + struct pci_dev *host_bridge; + int pos, ttl = 48; + + /* + * HT MSI mapping should be disabled on devices that are below + * a non-Hypertransport host bridge. Locate the host bridge... + */ + host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); + if (host_bridge == NULL) { + dev_warn(&dev->dev, + "nv_msi_ht_cap_quirk didn't locate host bridge\n"); + return; + } + + pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); + if (pos != 0) { + /* Host bridge is to HT */ + ht_enable_msi_mapping(dev); + return; + } + + /* Host bridge is not to HT, disable HT MSI mapping on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Quirk disabling HT MSI mapping"); + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags & ~HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk); + static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev) { dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; diff --git a/trunk/drivers/pci/setup-bus.c b/trunk/drivers/pci/setup-bus.c index 262b0439abe9..125e7b7f34ff 100644 --- a/trunk/drivers/pci/setup-bus.c +++ b/trunk/drivers/pci/setup-bus.c @@ -206,10 +206,8 @@ pci_setup_bridge(struct pci_bus *bus) if (bus->resource[2]->flags & IORESOURCE_PREFETCH) { l = (region.start >> 16) & 0xfff0; l |= region.end & 0xfff00000; -#ifdef CONFIG_RESOURCES_64BIT - bu = region.start >> 32; - lu = region.end >> 32; -#endif + bu = upper_32_bits(region.start); + lu = upper_32_bits(region.end); DBG(KERN_INFO " PREFETCH window: 0x%016llx-0x%016llx\n", (unsigned long long)region.start, (unsigned long long)region.end); diff --git a/trunk/drivers/pcmcia/i82092.c b/trunk/drivers/pcmcia/i82092.c index 749515534cc0..e54ecc580d9e 100644 --- a/trunk/drivers/pcmcia/i82092.c +++ b/trunk/drivers/pcmcia/i82092.c @@ -647,7 +647,12 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_ if ( (mem->card_start > 0x3ffffff) || (region.start > region.end) || (mem->speed > 1000) ) { leave("i82092aa_set_mem_map: invalid address / speed"); - printk("invalid mem map for socket %i : %lx to %lx with a start of %x \n",sock,region.start, region.end, mem->card_start); + printk("invalid mem map for socket %i: %llx to %llx with a " + "start of %x\n", + sock, + (unsigned long long)region.start, + (unsigned long long)region.end, + mem->card_start); return -EINVAL; } diff --git a/trunk/drivers/thermal/thermal.c b/trunk/drivers/thermal/thermal.c index e782b3e7fcdb..8b86e53ccf7a 100644 --- a/trunk/drivers/thermal/thermal.c +++ b/trunk/drivers/thermal/thermal.c @@ -306,12 +306,23 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, { struct thermal_cooling_device_instance *dev; struct thermal_cooling_device_instance *pos; + struct thermal_zone_device *pos1; + struct thermal_cooling_device *pos2; int result; if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE)) return -EINVAL; - if (!tz || !cdev) + list_for_each_entry(pos1, &thermal_tz_list, node) { + if (pos1 == tz) + break; + } + list_for_each_entry(pos2, &thermal_cdev_list, node) { + if (pos2 == cdev) + break; + } + + if (tz != pos1 || cdev != pos2) return -EINVAL; dev = @@ -437,20 +448,20 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, int result; if (strlen(type) >= THERMAL_NAME_LENGTH) - return NULL; + return ERR_PTR(-EINVAL); if (!ops || !ops->get_max_state || !ops->get_cur_state || !ops->set_cur_state) - return NULL; + return ERR_PTR(-EINVAL); cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL); if (!cdev) - return NULL; + return ERR_PTR(-ENOMEM); result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id); if (result) { kfree(cdev); - return NULL; + return ERR_PTR(result); } strcpy(cdev->type, type); @@ -462,7 +473,7 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, if (result) { release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); kfree(cdev); - return NULL; + return ERR_PTR(result); } /* sys I/F */ @@ -498,7 +509,7 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type, unregister: release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); device_unregister(&cdev->device); - return NULL; + return ERR_PTR(result); } EXPORT_SYMBOL(thermal_cooling_device_register); @@ -570,17 +581,17 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, int count; if (strlen(type) >= THERMAL_NAME_LENGTH) - return NULL; + return ERR_PTR(-EINVAL); if (trips > THERMAL_MAX_TRIPS || trips < 0) - return NULL; + return ERR_PTR(-EINVAL); if (!ops || !ops->get_temp) - return NULL; + return ERR_PTR(-EINVAL); tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL); if (!tz) - return NULL; + return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&tz->cooling_devices); idr_init(&tz->idr); @@ -588,7 +599,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id); if (result) { kfree(tz); - return NULL; + return ERR_PTR(result); } strcpy(tz->type, type); @@ -601,7 +612,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, if (result) { release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); kfree(tz); - return NULL; + return ERR_PTR(result); } /* sys I/F */ @@ -643,7 +654,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); device_unregister(&tz->device); - return NULL; + return ERR_PTR(result); } EXPORT_SYMBOL(thermal_zone_device_register); diff --git a/trunk/drivers/uio/uio.c b/trunk/drivers/uio/uio.c index 2a77e9d42c68..e8a01f264540 100644 --- a/trunk/drivers/uio/uio.c +++ b/trunk/drivers/uio/uio.c @@ -57,29 +57,29 @@ struct uio_map { }; #define to_map(map) container_of(map, struct uio_map, kobj) - -static ssize_t map_attr_show(struct kobject *kobj, struct kobj_attribute *attr, - char *buf) +static ssize_t map_addr_show(struct uio_mem *mem, char *buf) { - struct uio_map *map = to_map(kobj); - struct uio_mem *mem = map->mem; - - if (strncmp(attr->attr.name, "addr", 4) == 0) - return sprintf(buf, "0x%lx\n", mem->addr); - - if (strncmp(attr->attr.name, "size", 4) == 0) - return sprintf(buf, "0x%lx\n", mem->size); + return sprintf(buf, "0x%lx\n", mem->addr); +} - return -ENODEV; +static ssize_t map_size_show(struct uio_mem *mem, char *buf) +{ + return sprintf(buf, "0x%lx\n", mem->size); } -static struct kobj_attribute attr_attribute = - __ATTR(addr, S_IRUGO, map_attr_show, NULL); -static struct kobj_attribute size_attribute = - __ATTR(size, S_IRUGO, map_attr_show, NULL); +struct uio_sysfs_entry { + struct attribute attr; + ssize_t (*show)(struct uio_mem *, char *); + ssize_t (*store)(struct uio_mem *, const char *, size_t); +}; + +static struct uio_sysfs_entry addr_attribute = + __ATTR(addr, S_IRUGO, map_addr_show, NULL); +static struct uio_sysfs_entry size_attribute = + __ATTR(size, S_IRUGO, map_size_show, NULL); static struct attribute *attrs[] = { - &attr_attribute.attr, + &addr_attribute.attr, &size_attribute.attr, NULL, /* need to NULL terminate the list of attributes */ }; @@ -90,8 +90,28 @@ static void map_release(struct kobject *kobj) kfree(map); } +static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct uio_map *map = to_map(kobj); + struct uio_mem *mem = map->mem; + struct uio_sysfs_entry *entry; + + entry = container_of(attr, struct uio_sysfs_entry, attr); + + if (!entry->show) + return -EIO; + + return entry->show(mem, buf); +} + +static struct sysfs_ops uio_sysfs_ops = { + .show = map_type_show, +}; + static struct kobj_type map_attr_type = { .release = map_release, + .sysfs_ops = &uio_sysfs_ops, .default_attrs = attrs, }; diff --git a/trunk/drivers/usb/class/cdc-acm.c b/trunk/drivers/usb/class/cdc-acm.c index bcc42136c93f..0147ea39340e 100644 --- a/trunk/drivers/usb/class/cdc-acm.c +++ b/trunk/drivers/usb/class/cdc-acm.c @@ -496,13 +496,10 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) otherwise it is scheduled, and with high data rates data can get lost. */ tty->low_latency = 1; - if (usb_autopm_get_interface(acm->control)) { - mutex_unlock(&open_mutex); - return -EIO; - } + if (usb_autopm_get_interface(acm->control) < 0) + goto early_bail; mutex_lock(&acm->mutex); - mutex_unlock(&open_mutex); if (acm->used++) { usb_autopm_put_interface(acm->control); goto done; @@ -536,6 +533,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) done: err_out: mutex_unlock(&acm->mutex); + mutex_unlock(&open_mutex); return rv; full_bailout: @@ -544,6 +542,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) usb_autopm_put_interface(acm->control); acm->used--; mutex_unlock(&acm->mutex); +early_bail: + mutex_unlock(&open_mutex); return -EIO; } diff --git a/trunk/drivers/usb/class/usblp.c b/trunk/drivers/usb/class/usblp.c index ad632f2d6f94..0647164d36db 100644 --- a/trunk/drivers/usb/class/usblp.c +++ b/trunk/drivers/usb/class/usblp.c @@ -428,6 +428,7 @@ static int usblp_open(struct inode *inode, struct file *file) usblp->rcomplete = 0; if (handle_bidir(usblp) < 0) { + usb_autopm_put_interface(intf); usblp->used = 0; file->private_data = NULL; retval = -EIO; diff --git a/trunk/drivers/usb/core/quirks.c b/trunk/drivers/usb/core/quirks.c index d42c561c75f1..f90ab5e94c58 100644 --- a/trunk/drivers/usb/core/quirks.c +++ b/trunk/drivers/usb/core/quirks.c @@ -28,11 +28,23 @@ * devices is broken... */ static const struct usb_device_id usb_quirk_list[] = { + /* Action Semiconductor flash disk */ + { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255}, + /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Creative SB Audigy 2 NX */ + { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Roland SC-8820 */ + { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Edirol SD-20 */ + { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/trunk/drivers/usb/gadget/ether.c b/trunk/drivers/usb/gadget/ether.c index a70e255402b8..e99872308144 100644 --- a/trunk/drivers/usb/gadget/ether.c +++ b/trunk/drivers/usb/gadget/ether.c @@ -1561,6 +1561,7 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) memcpy(req->buf, buf, n); req->complete = rndis_response_complete; rndis_free_response(dev->rndis_config, buf); + value = n; } /* else stalls ... spec says to avoid that */ } diff --git a/trunk/drivers/usb/gadget/printer.c b/trunk/drivers/usb/gadget/printer.c index 9fdabc8fcac4..4f6bfa100f2a 100644 --- a/trunk/drivers/usb/gadget/printer.c +++ b/trunk/drivers/usb/gadget/printer.c @@ -1299,7 +1299,7 @@ printer_unbind(struct usb_gadget *gadget) printer_req_free(dev->in_ep, req); } - if (dev->current_rx_req != NULL); + if (dev->current_rx_req != NULL) printer_req_free(dev->out_ep, dev->current_rx_req); while (!list_empty(&dev->rx_reqs)) { diff --git a/trunk/drivers/usb/host/Kconfig b/trunk/drivers/usb/host/Kconfig index d97b16b52efa..bf8be2a41a4a 100644 --- a/trunk/drivers/usb/host/Kconfig +++ b/trunk/drivers/usb/host/Kconfig @@ -69,10 +69,9 @@ config USB_EHCI_BIG_ENDIAN_DESC default y config USB_EHCI_FSL - bool - depends on USB_EHCI_HCD + bool "Support for Freescale on-chip EHCI USB controller" + depends on USB_EHCI_HCD && FSL_SOC select USB_EHCI_ROOT_HUB_TT - default y if MPC834x || PPC_MPC831x ---help--- Variation of ARC USB block used in some Freescale chips. diff --git a/trunk/drivers/usb/host/ehci-hcd.c b/trunk/drivers/usb/host/ehci-hcd.c index 4caa6a8b9a37..b8ad55aff842 100644 --- a/trunk/drivers/usb/host/ehci-hcd.c +++ b/trunk/drivers/usb/host/ehci-hcd.c @@ -862,18 +862,18 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) /* reschedule QH iff another request is queued */ if (!list_empty (&qh->qtd_list) && HC_IS_RUNNING (hcd->state)) { - int schedule_status; - - schedule_status = qh_schedule (ehci, qh); - spin_unlock_irqrestore (&ehci->lock, flags); - - if (schedule_status != 0) { - // shouldn't happen often, but ... - // FIXME kill those tds' urbs - err ("can't reschedule qh %p, err %d", - qh, schedule_status); - } - return status; + rc = qh_schedule(ehci, qh); + + /* An error here likely indicates handshake failure + * or no space left in the schedule. Neither fault + * should happen often ... + * + * FIXME kill the now-dysfunctional queued urbs + */ + if (rc != 0) + ehci_err(ehci, + "can't reschedule qh %p, err %d", + qh, rc); } break; @@ -1014,7 +1014,7 @@ MODULE_LICENSE ("GPL"); #endif #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) #error "missing bus glue for ehci-hcd" #endif diff --git a/trunk/drivers/usb/misc/ldusb.c b/trunk/drivers/usb/misc/ldusb.c index 8208496dfc63..c730d20eec66 100644 --- a/trunk/drivers/usb/misc/ldusb.c +++ b/trunk/drivers/usb/misc/ldusb.c @@ -61,6 +61,7 @@ #define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 +#define USB_DEVICE_ID_VERNIER_LCSPEC 0x0006 #define USB_VENDOR_ID_MICROCHIP 0x04d8 #define USB_DEVICE_ID_PICDEM 0x000c @@ -92,6 +93,7 @@ static struct usb_device_id ld_usb_table [] = { { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, { USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICDEM) }, + { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LCSPEC) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, ld_usb_table); diff --git a/trunk/drivers/usb/misc/trancevibrator.c b/trunk/drivers/usb/misc/trancevibrator.c index 67e2fc20eeeb..03368edf3f22 100644 --- a/trunk/drivers/usb/misc/trancevibrator.c +++ b/trunk/drivers/usb/misc/trancevibrator.c @@ -59,13 +59,14 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr, { struct usb_interface *intf = to_usb_interface(dev); struct trancevibrator *tv = usb_get_intfdata(intf); - int temp, retval; + int temp, retval, old; temp = simple_strtoul(buf, NULL, 10); if (temp > 255) temp = 255; else if (temp < 0) temp = 0; + old = tv->speed; tv->speed = temp; dev_dbg(&tv->udev->dev, "speed = %d\n", tv->speed); @@ -77,6 +78,7 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr, tv->speed, /* speed value */ 0, NULL, 0, USB_CTRL_GET_TIMEOUT); if (retval) { + tv->speed = old; dev_dbg(&tv->udev->dev, "retval = %d\n", retval); return retval; } diff --git a/trunk/drivers/usb/serial/ftdi_sio.c b/trunk/drivers/usb/serial/ftdi_sio.c index 90dcc625f70d..76db2fef4657 100644 --- a/trunk/drivers/usb/serial/ftdi_sio.c +++ b/trunk/drivers/usb/serial/ftdi_sio.c @@ -393,8 +393,8 @@ static const char *ftdi_chip_name[] = { #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) /* End TIOCMIWAIT */ -#define FTDI_IMPL_ASYNC_FLAGS = ( ASYNC_SPD_HI | ASYNC_SPD_VHI \ - ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP ) +#define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \ + | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP) /* function prototypes for a FTDI serial converter */ static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id); diff --git a/trunk/drivers/usb/serial/option.c b/trunk/drivers/usb/serial/option.c index 5e8bf1bc1e50..af2674c57414 100644 --- a/trunk/drivers/usb/serial/option.c +++ b/trunk/drivers/usb/serial/option.c @@ -113,6 +113,9 @@ static int option_send_setup(struct usb_serial_port *port); #define NOVATELWIRELESS_VENDOR_ID 0x1410 #define DELL_VENDOR_ID 0x413C +#define KYOCERA_VENDOR_ID 0x0c88 +#define KYOCERA_PRODUCT_KPC680 0x180a + #define ANYDATA_VENDOR_ID 0x16d5 #define ANYDATA_PRODUCT_ADU_E100A 0x6501 #define ANYDATA_PRODUCT_ADU_500A 0x6502 @@ -121,6 +124,8 @@ static int option_send_setup(struct usb_serial_port *port); #define BANDRICH_PRODUCT_C100_1 0x1002 #define BANDRICH_PRODUCT_C100_2 0x1003 +#define QUALCOMM_VENDOR_ID 0x05C6 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -174,18 +179,23 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x5010) }, /* Novatel U727 */ { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8129) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -247,10 +257,10 @@ static int debug; struct option_port_private { /* Input endpoints and buffer for this port */ struct urb *in_urbs[N_IN_URB]; - char in_buffer[N_IN_URB][IN_BUFLEN]; + u8 *in_buffer[N_IN_URB]; /* Output endpoints and buffer for this port */ struct urb *out_urbs[N_OUT_URB]; - char out_buffer[N_OUT_URB][OUT_BUFLEN]; + u8 *out_buffer[N_OUT_URB]; unsigned long out_busy; /* Bit vector of URBs in use */ /* Settings for the port */ @@ -737,9 +747,10 @@ static int option_send_setup(struct usb_serial_port *port) static int option_startup(struct usb_serial *serial) { - int i, err; + int i, j, err; struct usb_serial_port *port; struct option_port_private *portdata; + u8 *buffer; dbg("%s", __FUNCTION__); @@ -753,6 +764,20 @@ static int option_startup(struct usb_serial *serial) return (1); } + for (j = 0; j < N_IN_URB; j++) { + buffer = (u8 *)__get_free_page(GFP_KERNEL); + if (!buffer) + goto bail_out_error; + portdata->in_buffer[j] = buffer; + } + + for (j = 0; j < N_OUT_URB; j++) { + buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); + if (!buffer) + goto bail_out_error2; + portdata->out_buffer[j] = buffer; + } + usb_set_serial_port_data(port, portdata); if (! port->interrupt_in_urb) @@ -766,6 +791,16 @@ static int option_startup(struct usb_serial *serial) option_setup_urbs(serial); return (0); + +bail_out_error2: + for (j = 0; j < N_OUT_URB; j++) + kfree(portdata->out_buffer[j]); +bail_out_error: + for (j = 0; j < N_IN_URB; j++) + if (portdata->in_buffer[j]) + free_page((unsigned long)portdata->in_buffer[j]); + kfree(portdata); + return 1; } static void option_shutdown(struct usb_serial *serial) @@ -794,12 +829,14 @@ static void option_shutdown(struct usb_serial *serial) for (j = 0; j < N_IN_URB; j++) { if (portdata->in_urbs[j]) { usb_free_urb(portdata->in_urbs[j]); + free_page((unsigned long)portdata->in_buffer[j]); portdata->in_urbs[j] = NULL; } } for (j = 0; j < N_OUT_URB; j++) { if (portdata->out_urbs[j]) { usb_free_urb(portdata->out_urbs[j]); + kfree(portdata->out_buffer[j]); portdata->out_urbs[j] = NULL; } } diff --git a/trunk/drivers/usb/serial/sierra.c b/trunk/drivers/usb/serial/sierra.c index 4c925e3e8a63..e3d44ae8d448 100644 --- a/trunk/drivers/usb/serial/sierra.c +++ b/trunk/drivers/usb/serial/sierra.c @@ -178,7 +178,6 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */ - { USB_DEVICE(0x05C6, 0x6613), .driver_info = DEVICE_1_PORT }, /* Onda H600/ZTE MF330 */ { USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER}, { } diff --git a/trunk/drivers/usb/storage/protocol.c b/trunk/drivers/usb/storage/protocol.c index a41ce21c0697..958f5b17847c 100644 --- a/trunk/drivers/usb/storage/protocol.c +++ b/trunk/drivers/usb/storage/protocol.c @@ -150,13 +150,14 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb, /* Copy a buffer of length buflen to/from the srb's transfer buffer. * Update the **sgptr and *offset variables so that the next copy will - * pick up from where this one left off. */ - + * pick up from where this one left off. + */ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, unsigned int buflen, struct scsi_cmnd *srb, struct scatterlist **sgptr, unsigned int *offset, enum xfer_buf_dir dir) { unsigned int cnt; + struct scatterlist *sg = *sgptr; /* We have to go through the list one entry * at a time. Each s-g entry contains some number of pages, and @@ -164,22 +165,23 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, * in kernel-addressable memory then kmap() will return its address. * If the page is not directly accessible -- such as a user buffer * located in high memory -- then kmap() will map it to a temporary - * position in the kernel's virtual address space. */ - struct scatterlist *sg = *sgptr; + * position in the kernel's virtual address space. + */ if (!sg) sg = scsi_sglist(srb); + buflen = min(buflen, scsi_bufflen(srb)); /* This loop handles a single s-g list entry, which may - * include multiple pages. Find the initial page structure - * and the starting offset within the page, and update - * the *offset and **sgptr values for the next loop. */ + * include multiple pages. Find the initial page structure + * and the starting offset within the page, and update + * the *offset and **sgptr values for the next loop. + */ cnt = 0; - while (cnt < buflen) { + while (cnt < buflen && sg) { struct page *page = sg_page(sg) + ((sg->offset + *offset) >> PAGE_SHIFT); - unsigned int poff = - (sg->offset + *offset) & (PAGE_SIZE-1); + unsigned int poff = (sg->offset + *offset) & (PAGE_SIZE-1); unsigned int sglen = sg->length - *offset; if (sglen > buflen - cnt) { @@ -222,14 +224,15 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, } /* Store the contents of buffer into srb's transfer buffer and set the - * SCSI residue. */ + * SCSI residue. + */ void usb_stor_set_xfer_buf(unsigned char *buffer, unsigned int buflen, struct scsi_cmnd *srb) { unsigned int offset = 0; struct scatterlist *sg = NULL; - usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset, + buflen = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset, TO_XFER_BUF); if (buflen < scsi_bufflen(srb)) scsi_set_resid(srb, scsi_bufflen(srb) - buflen); diff --git a/trunk/drivers/usb/storage/transport.c b/trunk/drivers/usb/storage/transport.c index d9f4912f873d..5780ed15f1ad 100644 --- a/trunk/drivers/usb/storage/transport.c +++ b/trunk/drivers/usb/storage/transport.c @@ -891,17 +891,6 @@ int usb_stor_Bulk_max_lun(struct us_data *us) if (result > 0) return us->iobuf[0]; - /* - * Some devices (i.e. Iomega Zip100) need this -- apparently - * the bulk pipes get STALLed when the GetMaxLUN request is - * processed. This is, in theory, harmless to all other devices - * (regardless of if they stall or not). - */ - if (result == -EPIPE) { - usb_stor_clear_halt(us, us->recv_bulk_pipe); - usb_stor_clear_halt(us, us->send_bulk_pipe); - } - /* * Some devices don't like GetMaxLUN. They may STALL the control * pipe, they may return a zero-length result, they may do nothing at diff --git a/trunk/drivers/usb/storage/unusual_devs.h b/trunk/drivers/usb/storage/unusual_devs.h index fe12737e0e2b..99679a8cfa02 100644 --- a/trunk/drivers/usb/storage/unusual_devs.h +++ b/trunk/drivers/usb/storage/unusual_devs.h @@ -357,7 +357,7 @@ UNUSUAL_DEV( 0x04b0, 0x040f, 0x0100, 0x0200, US_FL_FIX_CAPACITY), /* Reported by Emil Larsson */ -UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101, +UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0110, "NIKON", "NIKON DSC D80", US_SC_DEVICE, US_PR_DEVICE, NULL, @@ -759,6 +759,18 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Digital Camera EX-20 DSC", US_SC_8070, US_PR_DEVICE, NULL, 0 ), +/* Reported by Andre Welter + * This antique device predates the release of the Bulk-only Transport + * spec, and if it gets a Get-Max-LUN then it requires the host to do a + * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent + * us from sending the request. + */ +UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100, + "Iomega", + "ZIP 100", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + /* Reported by */ UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, "LaCie", @@ -1412,6 +1424,17 @@ UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), +/* Patch by Leonid Petrov mail at lpetrov.net + * Reported by Robert Spitzenpfeil + * http://www.qbik.ch/usb/devices/showdev.php?id=1705 + * Updated to 103 device by MJ Ray mjr at phonecoop.coop + */ +UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100, + "Oracom Co., Ltd", + "ORC-200M", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* David Kuehling : * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI * errors when trying to write. @@ -1477,6 +1500,15 @@ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, 0 ), +/* Reported by Fabio Venturi + * The device reports a vendor-specific bDeviceClass. + */ +UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, + "Actions Semiconductor", + "Mtp device", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0), + /* Reported by Kevin Lloyd * Entry is needed for the initializer function override, * which instructs the device to load as a modem diff --git a/trunk/drivers/video/pxafb.c b/trunk/drivers/video/pxafb.c index 10f912df2dad..97facb121c73 100644 --- a/trunk/drivers/video/pxafb.c +++ b/trunk/drivers/video/pxafb.c @@ -1046,7 +1046,7 @@ pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data) switch (val) { case CPUFREQ_ADJUST: case CPUFREQ_INCOMPATIBLE: - printk(KERN_DEBUG "min dma period: %d ps, " + pr_debug("min dma period: %d ps, " "new clock %d kHz\n", pxafb_display_dma_period(var), policy->max); // TODO: fill in min/max values @@ -1361,7 +1361,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options) } #endif -int __init pxafb_probe(struct platform_device *dev) +static int __init pxafb_probe(struct platform_device *dev) { struct pxafb_info *fbi; struct pxafb_mach_info *inf; @@ -1486,7 +1486,7 @@ static struct platform_driver pxafb_driver = { }; #ifndef MODULE -int __devinit pxafb_setup(char *options) +static int __devinit pxafb_setup(char *options) { # ifdef CONFIG_FB_PXA_PARAMETERS if (options) @@ -1501,7 +1501,7 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)"); # endif #endif -int __devinit pxafb_init(void) +static int __devinit pxafb_init(void) { #ifndef MODULE char *option = NULL; diff --git a/trunk/fs/dlm/rcom.c b/trunk/fs/dlm/rcom.c index 035e6f9990b0..67522c268c14 100644 --- a/trunk/fs/dlm/rcom.c +++ b/trunk/fs/dlm/rcom.c @@ -215,6 +215,8 @@ int dlm_rcom_names(struct dlm_ls *ls, int nodeid, char *last_name, int last_len) ls->ls_recover_nodeid = nodeid; if (nodeid == dlm_our_nodeid()) { + ls->ls_recover_buf->rc_header.h_length = + dlm_config.ci_buffer_size; dlm_copy_master_names(ls, last_name, last_len, ls->ls_recover_buf->rc_buf, max_size, nodeid); diff --git a/trunk/fs/lockd/svc.c b/trunk/fs/lockd/svc.c index 08226464e563..1ed8bd4de941 100644 --- a/trunk/fs/lockd/svc.c +++ b/trunk/fs/lockd/svc.c @@ -153,7 +153,7 @@ lockd(struct svc_rqst *rqstp) */ while ((nlmsvc_users || !signalled()) && nlmsvc_pid == current->pid) { long timeout = MAX_SCHEDULE_TIMEOUT; - char buf[RPC_MAX_ADDRBUFLEN]; + RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); if (signalled()) { flush_signals(current); diff --git a/trunk/fs/nfs/callback.c b/trunk/fs/nfs/callback.c index ecc06c619494..66648dd92d97 100644 --- a/trunk/fs/nfs/callback.c +++ b/trunk/fs/nfs/callback.c @@ -93,6 +93,7 @@ static void nfs_callback_svc(struct svc_rqst *rqstp) svc_process(rqstp); } + flush_signals(current); svc_exit_thread(rqstp); nfs_callback_info.pid = 0; complete(&nfs_callback_info.stopped); @@ -171,7 +172,7 @@ void nfs_callback_down(void) static int nfs_callback_authenticate(struct svc_rqst *rqstp) { struct nfs_client *clp; - char buf[RPC_MAX_ADDRBUFLEN]; + RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); /* Don't talk to strangers */ clp = nfs_find_client(svc_addr(rqstp), 4); diff --git a/trunk/fs/nfs/callback_xdr.c b/trunk/fs/nfs/callback_xdr.c index c63eb720b68b..13619d24f023 100644 --- a/trunk/fs/nfs/callback_xdr.c +++ b/trunk/fs/nfs/callback_xdr.c @@ -254,7 +254,7 @@ static __be32 encode_attr_change(struct xdr_stream *xdr, const uint32_t *bitmap, if (!(bitmap[0] & FATTR4_WORD0_CHANGE)) return 0; p = xdr_reserve_space(xdr, 8); - if (unlikely(p == 0)) + if (unlikely(!p)) return htonl(NFS4ERR_RESOURCE); p = xdr_encode_hyper(p, change); return 0; @@ -267,7 +267,7 @@ static __be32 encode_attr_size(struct xdr_stream *xdr, const uint32_t *bitmap, u if (!(bitmap[0] & FATTR4_WORD0_SIZE)) return 0; p = xdr_reserve_space(xdr, 8); - if (unlikely(p == 0)) + if (unlikely(!p)) return htonl(NFS4ERR_RESOURCE); p = xdr_encode_hyper(p, size); return 0; @@ -278,7 +278,7 @@ static __be32 encode_attr_time(struct xdr_stream *xdr, const struct timespec *ti __be32 *p; p = xdr_reserve_space(xdr, 12); - if (unlikely(p == 0)) + if (unlikely(!p)) return htonl(NFS4ERR_RESOURCE); p = xdr_encode_hyper(p, time->tv_sec); *p = htonl(time->tv_nsec); diff --git a/trunk/fs/nfs/delegation.c b/trunk/fs/nfs/delegation.c index b9eadd18ba70..00a5e4405e16 100644 --- a/trunk/fs/nfs/delegation.c +++ b/trunk/fs/nfs/delegation.c @@ -49,7 +49,7 @@ static int nfs_delegation_claim_locks(struct nfs_open_context *ctx, struct nfs4_ struct file_lock *fl; int status; - for (fl = inode->i_flock; fl != 0; fl = fl->fl_next) { + for (fl = inode->i_flock; fl != NULL; fl = fl->fl_next) { if (!(fl->fl_flags & (FL_POSIX|FL_FLOCK))) continue; if (nfs_file_open_context(fl->fl_file) != ctx) diff --git a/trunk/fs/nfs/idmap.c b/trunk/fs/nfs/idmap.c index 8ae5dba2d4e5..86147b0ab2cf 100644 --- a/trunk/fs/nfs/idmap.c +++ b/trunk/fs/nfs/idmap.c @@ -309,7 +309,7 @@ nfs_idmap_name(struct idmap *idmap, struct idmap_hashtable *h, mutex_lock(&idmap->idmap_im_lock); he = idmap_lookup_id(h, id); - if (he != 0) { + if (he) { memcpy(name, he->ih_name, he->ih_namelen); ret = he->ih_namelen; goto out; diff --git a/trunk/fs/nfs/nfs4state.c b/trunk/fs/nfs/nfs4state.c index 6233eb5e98c1..b962397004c1 100644 --- a/trunk/fs/nfs/nfs4state.c +++ b/trunk/fs/nfs/nfs4state.c @@ -785,7 +785,7 @@ static int nfs4_reclaim_locks(struct nfs4_state_recovery_ops *ops, struct nfs4_s struct file_lock *fl; int status = 0; - for (fl = inode->i_flock; fl != 0; fl = fl->fl_next) { + for (fl = inode->i_flock; fl != NULL; fl = fl->fl_next) { if (!(fl->fl_flags & (FL_POSIX|FL_FLOCK))) continue; if (nfs_file_open_context(fl->fl_file)->state != state) diff --git a/trunk/fs/nfsd/nfsfh.c b/trunk/fs/nfsd/nfsfh.c index 0130b345234d..1eb771d79cca 100644 --- a/trunk/fs/nfsd/nfsfh.c +++ b/trunk/fs/nfsd/nfsfh.c @@ -101,7 +101,7 @@ static __be32 nfsd_setuser_and_check_port(struct svc_rqst *rqstp, { /* Check if the request originated from a secure port. */ if (!rqstp->rq_secure && EX_SECURE(exp)) { - char buf[RPC_MAX_ADDRBUFLEN]; + RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); dprintk(KERN_WARNING "nfsd: request from insecure port %s!\n", svc_print_addr(rqstp, buf, sizeof(buf))); diff --git a/trunk/include/asm-arm/mach/arch.h b/trunk/include/asm-arm/mach/arch.h index c59fad18e73b..bcc8aed7c9a9 100644 --- a/trunk/include/asm-arm/mach/arch.h +++ b/trunk/include/asm-arm/mach/arch.h @@ -17,7 +17,7 @@ struct sys_timer; struct machine_desc { /* * Note! The first four elements are used - * by assembler code in head-armv.S + * by assembler code in head.S, head-common.S */ unsigned int nr; /* architecture number */ unsigned int phys_io; /* start of physical io */ diff --git a/trunk/include/asm-powerpc/spu.h b/trunk/include/asm-powerpc/spu.h index f07c99ba5d13..e3c845b0f764 100644 --- a/trunk/include/asm-powerpc/spu.h +++ b/trunk/include/asm-powerpc/spu.h @@ -98,9 +98,8 @@ #define MFC_PRIV_ATTN_EVENT 0x00000800 #define MFC_MULTI_SRC_EVENT 0x00001000 -/* Flags indicating progress during context switch. */ +/* Flag indicating progress during context switch. */ #define SPU_CONTEXT_SWITCH_PENDING 0UL -#define SPU_CONTEXT_SWITCH_ACTIVE 1UL struct spu_context; struct spu_runqueue; diff --git a/trunk/include/linux/mm.h b/trunk/include/linux/mm.h index 26c7124b841a..3b3e1341163f 100644 --- a/trunk/include/linux/mm.h +++ b/trunk/include/linux/mm.h @@ -1171,12 +1171,18 @@ static inline void enable_debug_pagealloc(void) { debug_pagealloc_enabled = 1; } +#ifdef CONFIG_HIBERNATION +extern bool kernel_page_present(struct page *page); +#endif /* CONFIG_HIBERNATION */ #else static inline void kernel_map_pages(struct page *page, int numpages, int enable) {} static inline void enable_debug_pagealloc(void) { } +#ifdef CONFIG_HIBERNATION +static inline bool kernel_page_present(struct page *page) { return true; } +#endif /* CONFIG_HIBERNATION */ #endif extern struct vm_area_struct *get_gate_vma(struct task_struct *tsk); diff --git a/trunk/include/linux/page-flags.h b/trunk/include/linux/page-flags.h index bbad43fb8181..b5b30f1c1e59 100644 --- a/trunk/include/linux/page-flags.h +++ b/trunk/include/linux/page-flags.h @@ -266,7 +266,7 @@ static inline void SetPageUptodate(struct page *page) #define PG_head_tail_mask ((1L << PG_compound) | (1L << PG_reclaim)) -#define PageTail(page) ((page->flags & PG_head_tail_mask) \ +#define PageTail(page) (((page)->flags & PG_head_tail_mask) \ == PG_head_tail_mask) static inline void __SetPageTail(struct page *page) @@ -279,7 +279,7 @@ static inline void __ClearPageTail(struct page *page) page->flags &= ~PG_head_tail_mask; } -#define PageHead(page) ((page->flags & PG_head_tail_mask) \ +#define PageHead(page) (((page)->flags & PG_head_tail_mask) \ == (1L << PG_compound)) #define __SetPageHead(page) __SetPageCompound(page) #define __ClearPageHead(page) __ClearPageCompound(page) diff --git a/trunk/include/linux/pci_ids.h b/trunk/include/linux/pci_ids.h index 0519e53d5eb2..effdb558a588 100644 --- a/trunk/include/linux/pci_ids.h +++ b/trunk/include/linux/pci_ids.h @@ -2374,6 +2374,12 @@ #define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a #define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e #define PCI_DEVICE_ID_INTEL_IOAT_CNB 0x360b +#define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14 +#define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16 +#define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18 +#define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a +#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30 +#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff #define PCI_DEVICE_ID_INTEL_TOLAPAI_0 0x5031 diff --git a/trunk/include/sound/opl3.h b/trunk/include/sound/opl3.h index a0c5febdc4ea..6ba670707831 100644 --- a/trunk/include/sound/opl3.h +++ b/trunk/include/sound/opl3.h @@ -370,12 +370,13 @@ int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device, int snd_opl3_open(struct snd_hwdep * hw, struct file *file); int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, unsigned int cmd, unsigned long arg); -long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count, - loff_t *offset); int snd_opl3_release(struct snd_hwdep * hw, struct file *file); void snd_opl3_reset(struct snd_opl3 * opl3); +#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE) +long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count, + loff_t *offset); int snd_opl3_load_patch(struct snd_opl3 *opl3, int prog, int bank, int type, const char *name, @@ -384,5 +385,9 @@ int snd_opl3_load_patch(struct snd_opl3 *opl3, struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank, int create_patch); void snd_opl3_clear_patches(struct snd_opl3 *opl3); +#else +#define snd_opl3_write NULL +static inline void snd_opl3_clear_patches(struct snd_opl3 *opl3) {} +#endif #endif /* __SOUND_OPL3_H */ diff --git a/trunk/kernel/module.c b/trunk/kernel/module.c index 92595bad3812..901cd6ac2f11 100644 --- a/trunk/kernel/module.c +++ b/trunk/kernel/module.c @@ -987,12 +987,11 @@ static unsigned long resolve_symbol(Elf_Shdr *sechdrs, return ret; } - /* * /sys/module/foo/sections stuff * J. Corbet */ -#ifdef CONFIG_KALLSYMS +#if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS) static ssize_t module_sect_show(struct module_attribute *mattr, struct module *mod, char *buf) { @@ -1188,7 +1187,7 @@ static inline void add_notes_attrs(struct module *mod, unsigned int nsect, static inline void remove_notes_attrs(struct module *mod) { } -#endif /* CONFIG_KALLSYMS */ +#endif #ifdef CONFIG_SYSFS int module_add_modinfo_attrs(struct module *mod) @@ -1231,9 +1230,7 @@ void module_remove_modinfo_attrs(struct module *mod) } kfree(mod->modinfo_attrs); } -#endif -#ifdef CONFIG_SYSFS int mod_sysfs_init(struct module *mod) { int err; diff --git a/trunk/kernel/power/snapshot.c b/trunk/kernel/power/snapshot.c index 95250d7c8d91..72a020cabb4c 100644 --- a/trunk/kernel/power/snapshot.c +++ b/trunk/kernel/power/snapshot.c @@ -875,8 +875,8 @@ static inline void *saveable_highmem_page(unsigned long pfn) { return NULL; } #endif /* CONFIG_HIGHMEM */ /** - * saveable - Determine whether a non-highmem page should be included in - * the suspend image. + * saveable_page - Determine whether a non-highmem page should be included + * in the suspend image. * * We should save the page if it isn't Nosave, and is not in the range * of pages statically defined as 'unsaveable', and it isn't a part of @@ -897,7 +897,8 @@ static struct page *saveable_page(unsigned long pfn) if (swsusp_page_is_forbidden(page) || swsusp_page_is_free(page)) return NULL; - if (PageReserved(page) && pfn_is_nosave(pfn)) + if (PageReserved(page) + && (!kernel_page_present(page) || pfn_is_nosave(pfn))) return NULL; return page; @@ -938,6 +939,25 @@ static inline void do_copy_page(long *dst, long *src) *dst++ = *src++; } + +/** + * safe_copy_page - check if the page we are going to copy is marked as + * present in the kernel page tables (this always is the case if + * CONFIG_DEBUG_PAGEALLOC is not set and in that case + * kernel_page_present() always returns 'true'). + */ +static void safe_copy_page(void *dst, struct page *s_page) +{ + if (kernel_page_present(s_page)) { + do_copy_page(dst, page_address(s_page)); + } else { + kernel_map_pages(s_page, 1, 1); + do_copy_page(dst, page_address(s_page)); + kernel_map_pages(s_page, 1, 0); + } +} + + #ifdef CONFIG_HIGHMEM static inline struct page * page_is_saveable(struct zone *zone, unsigned long pfn) @@ -946,8 +966,7 @@ page_is_saveable(struct zone *zone, unsigned long pfn) saveable_highmem_page(pfn) : saveable_page(pfn); } -static inline void -copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) +static void copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) { struct page *s_page, *d_page; void *src, *dst; @@ -961,29 +980,26 @@ copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) kunmap_atomic(src, KM_USER0); kunmap_atomic(dst, KM_USER1); } else { - src = page_address(s_page); if (PageHighMem(d_page)) { /* Page pointed to by src may contain some kernel * data modified by kmap_atomic() */ - do_copy_page(buffer, src); + safe_copy_page(buffer, s_page); dst = kmap_atomic(pfn_to_page(dst_pfn), KM_USER0); memcpy(dst, buffer, PAGE_SIZE); kunmap_atomic(dst, KM_USER0); } else { - dst = page_address(d_page); - do_copy_page(dst, src); + safe_copy_page(page_address(d_page), s_page); } } } #else #define page_is_saveable(zone, pfn) saveable_page(pfn) -static inline void -copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) +static inline void copy_data_page(unsigned long dst_pfn, unsigned long src_pfn) { - do_copy_page(page_address(pfn_to_page(dst_pfn)), - page_address(pfn_to_page(src_pfn))); + safe_copy_page(page_address(pfn_to_page(dst_pfn)), + pfn_to_page(src_pfn)); } #endif /* CONFIG_HIGHMEM */ diff --git a/trunk/net/sunrpc/svcsock.c b/trunk/net/sunrpc/svcsock.c index 1d3e5fcc2cc4..c475977de05a 100644 --- a/trunk/net/sunrpc/svcsock.c +++ b/trunk/net/sunrpc/svcsock.c @@ -175,7 +175,7 @@ static int svc_sendto(struct svc_rqst *rqstp, struct xdr_buf *xdr) size_t base = xdr->page_base; unsigned int pglen = xdr->page_len; unsigned int flags = MSG_MORE; - char buf[RPC_MAX_ADDRBUFLEN]; + RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); slen = xdr->len; @@ -716,7 +716,7 @@ static struct svc_xprt *svc_tcp_accept(struct svc_xprt *xprt) struct socket *newsock; struct svc_sock *newsvsk; int err, slen; - char buf[RPC_MAX_ADDRBUFLEN]; + RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); dprintk("svc: tcp_accept %p sock %p\n", svsk, sock); if (!sock) @@ -1206,10 +1206,10 @@ static struct svc_xprt *svc_create_socket(struct svc_serv *serv, struct socket *sock; int error; int type; - char buf[RPC_MAX_ADDRBUFLEN]; struct sockaddr_storage addr; struct sockaddr *newsin = (struct sockaddr *)&addr; int newlen; + RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); dprintk("svc: svc_create_socket(%s, %d, %s)\n", serv->sv_program->pg_name, protocol, diff --git a/trunk/sound/drivers/opl3/opl3_synth.c b/trunk/sound/drivers/opl3/opl3_synth.c index a7bf7a4b1f85..fb64c890109b 100644 --- a/trunk/sound/drivers/opl3/opl3_synth.c +++ b/trunk/sound/drivers/opl3/opl3_synth.c @@ -22,6 +22,10 @@ #include #include +#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE) +#define OPL3_SUPPORT_SYNTH +#endif + /* * There is 18 possible 2 OP voices * (9 in the left and 9 in the right). @@ -155,9 +159,11 @@ int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, #endif return snd_opl3_set_connection(opl3, (int) arg); +#ifdef OPL3_SUPPORT_SYNTH case SNDRV_DM_FM_IOCTL_CLEAR_PATCHES: snd_opl3_clear_patches(opl3); return 0; +#endif #ifdef CONFIG_SND_DEBUG default: @@ -178,6 +184,7 @@ int snd_opl3_release(struct snd_hwdep * hw, struct file *file) return 0; } +#ifdef OPL3_SUPPORT_SYNTH /* * write the device - load patches */ @@ -341,6 +348,7 @@ void snd_opl3_clear_patches(struct snd_opl3 *opl3) } memset(opl3->patch_table, 0, sizeof(opl3->patch_table)); } +#endif /* OPL3_SUPPORT_SYNTH */ /* ------------------------------ */ diff --git a/trunk/sound/pci/bt87x.c b/trunk/sound/pci/bt87x.c index c9a2421cf6f0..4ecdd635ed1d 100644 --- a/trunk/sound/pci/bt87x.c +++ b/trunk/sound/pci/bt87x.c @@ -681,15 +681,12 @@ static struct snd_kcontrol_new snd_bt87x_capture_source = { static int snd_bt87x_free(struct snd_bt87x *chip) { - if (chip->mmio) { + if (chip->mmio) snd_bt87x_stop(chip); - if (chip->irq >= 0) - synchronize_irq(chip->irq); - - iounmap(chip->mmio); - } if (chip->irq >= 0) free_irq(chip->irq, chip); + if (chip->mmio) + iounmap(chip->mmio); pci_release_regions(chip->pci); pci_disable_device(chip->pci); kfree(chip); diff --git a/trunk/sound/pci/hda/hda_codec.c b/trunk/sound/pci/hda/hda_codec.c index 26812dc2b7f2..37c413923db8 100644 --- a/trunk/sound/pci/hda/hda_codec.c +++ b/trunk/sound/pci/hda/hda_codec.c @@ -1055,6 +1055,12 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name, const char **s; int err; + for (s = slaves; *s && !snd_hda_find_mixer_ctl(codec, *s); s++) + ; + if (!*s) { + snd_printdd("No slave found for %s\n", name); + return 0; + } kctl = snd_ctl_make_virtual_master(name, tlv); if (!kctl) return -ENOMEM; @@ -1197,8 +1203,8 @@ int snd_hda_mixer_bind_ctls_info(struct snd_kcontrol *kcontrol, struct hda_bind_ctls *c; int err; - c = (struct hda_bind_ctls *)kcontrol->private_value; mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value; kcontrol->private_value = *c->values; err = c->ops->info(kcontrol, uinfo); kcontrol->private_value = (long)c; @@ -1213,8 +1219,8 @@ int snd_hda_mixer_bind_ctls_get(struct snd_kcontrol *kcontrol, struct hda_bind_ctls *c; int err; - c = (struct hda_bind_ctls *)kcontrol->private_value; mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value; kcontrol->private_value = *c->values; err = c->ops->get(kcontrol, ucontrol); kcontrol->private_value = (long)c; @@ -1230,8 +1236,8 @@ int snd_hda_mixer_bind_ctls_put(struct snd_kcontrol *kcontrol, unsigned long *vals; int err = 0, change = 0; - c = (struct hda_bind_ctls *)kcontrol->private_value; mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value; for (vals = c->values; *vals; vals++) { kcontrol->private_value = *vals; err = c->ops->put(kcontrol, ucontrol); @@ -1251,8 +1257,8 @@ int snd_hda_mixer_bind_tlv(struct snd_kcontrol *kcontrol, int op_flag, struct hda_bind_ctls *c; int err; - c = (struct hda_bind_ctls *)kcontrol->private_value; mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */ + c = (struct hda_bind_ctls *)kcontrol->private_value; kcontrol->private_value = *c->values; err = c->ops->tlv(kcontrol, op_flag, size, tlv); kcontrol->private_value = (long)c; diff --git a/trunk/sound/pci/hda/hda_intel.c b/trunk/sound/pci/hda/hda_intel.c index 56f8a3050751..4be36c84b36c 100644 --- a/trunk/sound/pci/hda/hda_intel.c +++ b/trunk/sound/pci/hda/hda_intel.c @@ -275,6 +275,11 @@ enum { #define NVIDIA_HDA_TRANSREG_ADDR 0x4e #define NVIDIA_HDA_ENABLE_COHBITS 0x0f +/* Defines for Intel SCH HDA snoop control */ +#define INTEL_SCH_HDA_DEVC 0x78 +#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11) + + /* */ @@ -868,6 +873,8 @@ static void update_pci_byte(struct pci_dev *pci, unsigned int reg, static void azx_init_pci(struct azx *chip) { + unsigned short snoop; + /* Clear bits 0-2 of PCI register TCSEL (at offset 0x44) * TCSEL == Traffic Class Select Register, which sets PCI express QOS * Ensuring these bits are 0 clears playback static on some HD Audio @@ -888,6 +895,19 @@ static void azx_init_pci(struct azx *chip) NVIDIA_HDA_TRANSREG_ADDR, 0x0f, NVIDIA_HDA_ENABLE_COHBITS); break; + case AZX_DRIVER_SCH: + pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop); + if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) { + pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, \ + snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP)); + pci_read_config_word(chip->pci, + INTEL_SCH_HDA_DEVC, &snoop); + snd_printdd("HDA snoop disabled, enabling ... %s\n",\ + (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) \ + ? "Failed" : "OK"); + } + break; + } } @@ -1040,6 +1060,7 @@ static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev) static unsigned int azx_max_codecs[] __devinitdata = { [AZX_DRIVER_ICH] = 3, + [AZX_DRIVER_SCH] = 3, [AZX_DRIVER_ATI] = 4, [AZX_DRIVER_ATIHDMI] = 4, [AZX_DRIVER_VIA] = 3, /* FIXME: correct? */ @@ -1797,7 +1818,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, */ chip->playback_streams = (gcap & (0xF << 12)) >> 12; chip->capture_streams = (gcap & (0xF << 8)) >> 8; - chip->playback_index_offset = (gcap & (0xF << 12)) >> 12; + chip->playback_index_offset = chip->capture_streams; chip->capture_index_offset = 0; } else { /* gcap didn't give any info, switching to old method */ diff --git a/trunk/sound/pci/hda/hda_proc.c b/trunk/sound/pci/hda/hda_proc.c index 35a630d1770f..5633f77f8f3b 100644 --- a/trunk/sound/pci/hda/hda_proc.c +++ b/trunk/sound/pci/hda/hda_proc.c @@ -584,7 +584,8 @@ static void print_codec_info(struct snd_info_entry *entry, print_amp_caps(buffer, codec, nid, HDA_INPUT); snd_iprintf(buffer, " Amp-In vals: "); print_amp_vals(buffer, codec, nid, HDA_INPUT, - wid_caps & AC_WCAP_STEREO, conn_len); + wid_caps & AC_WCAP_STEREO, + wid_type == AC_WID_PIN ? 1 : conn_len); } if (wid_caps & AC_WCAP_OUT_AMP) { snd_iprintf(buffer, " Amp-Out caps: "); diff --git a/trunk/sound/pci/hda/patch_conexant.c b/trunk/sound/pci/hda/patch_conexant.c index f6dd51cda7b2..f7cd3a804b11 100644 --- a/trunk/sound/pci/hda/patch_conexant.c +++ b/trunk/sound/pci/hda/patch_conexant.c @@ -488,7 +488,7 @@ static int conexant_ch_mode_put(struct snd_kcontrol *kcontrol, static hda_nid_t cxt5045_dac_nids[1] = { 0x19 }; static hda_nid_t cxt5045_adc_nids[1] = { 0x1a }; static hda_nid_t cxt5045_capsrc_nids[1] = { 0x1a }; -#define CXT5045_SPDIF_OUT 0x13 +#define CXT5045_SPDIF_OUT 0x18 static struct hda_channel_mode cxt5045_modes[1] = { { 2, NULL }, @@ -658,6 +658,7 @@ static struct hda_verb cxt5045_init_verbs[] = { {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17}, /* SPDIF route: PCM */ + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, { 0x13, AC_VERB_SET_CONNECT_SEL, 0x0 }, /* EAPD */ {0x10, AC_VERB_SET_EAPD_BTLENABLE, 0x2 }, /* default on */ @@ -683,6 +684,7 @@ static struct hda_verb cxt5045_benq_init_verbs[] = { {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17}, /* SPDIF route: PCM */ + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x13, AC_VERB_SET_CONNECT_SEL, 0x0}, /* EAPD */ {0x10, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */ @@ -781,7 +783,8 @@ static struct hda_verb cxt5045_test_init_verbs[] = { * PCM format, copyright asserted, no pre-emphasis and no validity * control. */ - {0x13, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x18, AC_VERB_SET_DIGI_CONVERT_1, 0}, /* Start with output sum widgets muted and their output gains at min */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, diff --git a/trunk/sound/pci/hda/patch_realtek.c b/trunk/sound/pci/hda/patch_realtek.c index 586d98f1b63d..777f8c01ca7a 100644 --- a/trunk/sound/pci/hda/patch_realtek.c +++ b/trunk/sound/pci/hda/patch_realtek.c @@ -5227,10 +5227,14 @@ static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol, const struct hda_input_mux *imux = spec->input_mux; unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 }; - hda_nid_t nid = capture_mixers[adc_idx]; + hda_nid_t nid; unsigned int *cur_val = &spec->cur_mux[adc_idx]; unsigned int i, idx; + if (spec->num_adc_nids < 3) + nid = capture_mixers[adc_idx + 1]; + else + nid = capture_mixers[adc_idx]; idx = ucontrol->value.enumerated.item[0]; if (idx >= imux->num_items) idx = imux->num_items - 1; @@ -6457,7 +6461,7 @@ static int alc883_mux_enum_put(struct snd_kcontrol *kcontrol, struct alc_spec *spec = codec->spec; const struct hda_input_mux *imux = spec->input_mux; unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); - static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 }; + static hda_nid_t capture_mixers[2] = { 0x23, 0x22 }; hda_nid_t nid = capture_mixers[adc_idx]; unsigned int *cur_val = &spec->cur_mux[adc_idx]; unsigned int i, idx; diff --git a/trunk/sound/pci/oxygen/oxygen.c b/trunk/sound/pci/oxygen/oxygen.c index f31a0eb409b0..9a9941bb0460 100644 --- a/trunk/sound/pci/oxygen/oxygen.c +++ b/trunk/sound/pci/oxygen/oxygen.c @@ -28,7 +28,9 @@ * GPIO 1 -> DFS1 of AK5385 */ +#include #include +#include #include #include #include @@ -37,6 +39,7 @@ #include #include "oxygen.h" #include "ak4396.h" +#include "cm9780.h" MODULE_AUTHOR("Clemens Ladisch "); MODULE_DESCRIPTION("C-Media CMI8788 driver"); @@ -75,6 +78,8 @@ MODULE_DEVICE_TABLE(pci, oxygen_ids); #define GPIO_AK5385_DFS_DOUBLE 0x0001 #define GPIO_AK5385_DFS_QUAD 0x0002 +#define GPIO_LINE_MUTE CM9780_GPO0 + #define WM8785_R0 0 #define WM8785_R1 1 #define WM8785_R2 2 @@ -180,16 +185,23 @@ static void wm8785_init(struct oxygen *chip) snd_component_add(chip->card, "WM8785"); } +static void cmi9780_init(struct oxygen *chip) +{ + oxygen_ac97_clear_bits(chip, 0, CM9780_GPIO_STATUS, GPIO_LINE_MUTE); +} + static void generic_init(struct oxygen *chip) { ak4396_init(chip); wm8785_init(chip); + cmi9780_init(chip); } static void meridian_init(struct oxygen *chip) { ak4396_init(chip); ak5385_init(chip); + cmi9780_init(chip); } static void generic_cleanup(struct oxygen *chip) @@ -285,6 +297,27 @@ static void set_ak5385_params(struct oxygen *chip, value, GPIO_AK5385_DFS_MASK); } +static void cmi9780_switch_hook(struct oxygen *chip, unsigned int codec, + unsigned int reg, int mute) +{ + if (codec != 0) + return; + switch (reg) { + case AC97_LINE: + oxygen_write_ac97_masked(chip, 0, CM9780_GPIO_STATUS, + mute ? GPIO_LINE_MUTE : 0, + GPIO_LINE_MUTE); + break; + case AC97_MIC: + case AC97_CD: + case AC97_AUX: + if (!mute) + oxygen_ac97_set_bits(chip, 0, CM9780_GPIO_STATUS, + GPIO_LINE_MUTE); + break; + } +} + static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0); static int ak4396_control_filter(struct snd_kcontrol_new *template) @@ -308,6 +341,7 @@ static const struct oxygen_model model_generic = { .set_adc_params = set_wm8785_params, .update_dac_volume = update_ak4396_volume, .update_dac_mute = update_ak4396_mute, + .ac97_switch_hook = cmi9780_switch_hook, .model_data_size = sizeof(struct generic_data), .dac_channels = 8, .used_channels = OXYGEN_CHANNEL_A | @@ -331,6 +365,7 @@ static const struct oxygen_model model_meridian = { .set_adc_params = set_ak5385_params, .update_dac_volume = update_ak4396_volume, .update_dac_mute = update_ak4396_mute, + .ac97_switch_hook = cmi9780_switch_hook, .model_data_size = sizeof(struct generic_data), .dac_channels = 8, .used_channels = OXYGEN_CHANNEL_B | diff --git a/trunk/sound/pci/oxygen/oxygen_lib.c b/trunk/sound/pci/oxygen/oxygen_lib.c index 6eb36dd11476..78c21155218e 100644 --- a/trunk/sound/pci/oxygen/oxygen_lib.c +++ b/trunk/sound/pci/oxygen/oxygen_lib.c @@ -204,7 +204,7 @@ static void oxygen_proc_read(struct snd_info_entry *entry, mutex_unlock(&chip->mutex); } -static void __devinit oxygen_proc_init(struct oxygen *chip) +static void oxygen_proc_init(struct oxygen *chip) { struct snd_info_entry *entry; @@ -215,7 +215,7 @@ static void __devinit oxygen_proc_init(struct oxygen *chip) #define oxygen_proc_init(chip) #endif -static void __devinit oxygen_init(struct oxygen *chip) +static void oxygen_init(struct oxygen *chip) { unsigned int i; @@ -399,8 +399,8 @@ static void oxygen_card_free(struct snd_card *card) pci_disable_device(chip->pci); } -int __devinit oxygen_pci_probe(struct pci_dev *pci, int index, char *id, - int midi, const struct oxygen_model *model) +int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, + int midi, const struct oxygen_model *model) { struct snd_card *card; struct oxygen *chip; @@ -507,7 +507,7 @@ int __devinit oxygen_pci_probe(struct pci_dev *pci, int index, char *id, } EXPORT_SYMBOL(oxygen_pci_probe); -void __devexit oxygen_pci_remove(struct pci_dev *pci) +void oxygen_pci_remove(struct pci_dev *pci) { snd_card_free(pci_get_drvdata(pci)); pci_set_drvdata(pci, NULL); diff --git a/trunk/sound/pci/oxygen/oxygen_pcm.c b/trunk/sound/pci/oxygen/oxygen_pcm.c index dfad3db35c82..b70046aca657 100644 --- a/trunk/sound/pci/oxygen/oxygen_pcm.c +++ b/trunk/sound/pci/oxygen/oxygen_pcm.c @@ -634,7 +634,7 @@ static void oxygen_pcm_free(struct snd_pcm *pcm) snd_pcm_lib_preallocate_free_for_all(pcm); } -int __devinit oxygen_pcm_init(struct oxygen *chip) +int oxygen_pcm_init(struct oxygen *chip) { struct snd_pcm *pcm; int outs, ins; diff --git a/trunk/sound/pci/rme9652/hdsp.c b/trunk/sound/pci/rme9652/hdsp.c index c2bd4384316a..1be84f22d0de 100644 --- a/trunk/sound/pci/rme9652/hdsp.c +++ b/trunk/sound/pci/rme9652/hdsp.c @@ -745,7 +745,7 @@ static int hdsp_get_iobox_version (struct hdsp *hdsp) #ifdef HDSP_FW_LOADER -static int __devinit hdsp_request_fw_loader(struct hdsp *hdsp); +static int hdsp_request_fw_loader(struct hdsp *hdsp); #endif static int hdsp_check_for_firmware (struct hdsp *hdsp, int load_on_demand) @@ -4688,8 +4688,7 @@ static struct snd_pcm_ops snd_hdsp_capture_ops = { .copy = snd_hdsp_capture_copy, }; -static int __devinit snd_hdsp_create_hwdep(struct snd_card *card, - struct hdsp *hdsp) +static int snd_hdsp_create_hwdep(struct snd_card *card, struct hdsp *hdsp) { struct snd_hwdep *hw; int err; @@ -4857,7 +4856,7 @@ static int snd_hdsp_create_alsa_devices(struct snd_card *card, struct hdsp *hdsp #ifdef HDSP_FW_LOADER /* load firmware via hotplug fw loader */ -static int __devinit hdsp_request_fw_loader(struct hdsp *hdsp) +static int hdsp_request_fw_loader(struct hdsp *hdsp) { const char *fwfile; const struct firmware *fw; diff --git a/trunk/sound/soc/fsl/mpc8610_hpcd.c b/trunk/sound/soc/fsl/mpc8610_hpcd.c index f26c4b2e8b6e..a00aac7a71f1 100644 --- a/trunk/sound/soc/fsl/mpc8610_hpcd.c +++ b/trunk/sound/soc/fsl/mpc8610_hpcd.c @@ -315,7 +315,7 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; - } else if (strcasecmp(sprop, "rj-master") == 0) { + } else if (strcasecmp(sprop, "rj-slave") == 0) { machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; diff --git a/trunk/sound/usb/caiaq/caiaq-device.c b/trunk/sound/usb/caiaq/caiaq-device.c index 58d25e4e7d6c..7c44a2c7f963 100644 --- a/trunk/sound/usb/caiaq/caiaq-device.c +++ b/trunk/sound/usb/caiaq/caiaq-device.c @@ -245,7 +245,7 @@ int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, tmp, sizeof(tmp)); } -static void setup_card(struct snd_usb_caiaqdev *dev) +static void __devinit setup_card(struct snd_usb_caiaqdev *dev) { int ret; char val[4]; @@ -359,7 +359,7 @@ static struct snd_card* create_card(struct usb_device* usb_dev) return card; } -static int init_card(struct snd_usb_caiaqdev *dev) +static int __devinit init_card(struct snd_usb_caiaqdev *dev) { char *c; struct usb_device *usb_dev = dev->chip.dev; @@ -428,7 +428,7 @@ static int init_card(struct snd_usb_caiaqdev *dev) return 0; } -static int snd_probe(struct usb_interface *intf, +static int __devinit snd_probe(struct usb_interface *intf, const struct usb_device_id *id) { int ret; diff --git a/trunk/sound/usb/usbmidi.c b/trunk/sound/usb/usbmidi.c index 750e929d5870..6676a177c99e 100644 --- a/trunk/sound/usb/usbmidi.c +++ b/trunk/sound/usb/usbmidi.c @@ -104,12 +104,14 @@ struct snd_usb_midi { struct usb_protocol_ops* usb_protocol_ops; struct list_head list; struct timer_list error_timer; + spinlock_t disc_lock; struct snd_usb_midi_endpoint { struct snd_usb_midi_out_endpoint *out; struct snd_usb_midi_in_endpoint *in; } endpoints[MIDI_MAX_ENDPOINTS]; unsigned long input_triggered; + unsigned char disconnected; }; struct snd_usb_midi_out_endpoint { @@ -306,6 +308,11 @@ static void snd_usbmidi_error_timer(unsigned long data) struct snd_usb_midi *umidi = (struct snd_usb_midi *)data; int i; + spin_lock(&umidi->disc_lock); + if (umidi->disconnected) { + spin_unlock(&umidi->disc_lock); + return; + } for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { struct snd_usb_midi_in_endpoint *in = umidi->endpoints[i].in; if (in && in->error_resubmit) { @@ -316,6 +323,7 @@ static void snd_usbmidi_error_timer(unsigned long data) if (umidi->endpoints[i].out) snd_usbmidi_do_output(umidi->endpoints[i].out); } + spin_unlock(&umidi->disc_lock); } /* helper function to send static data that may not DMA-able */ @@ -1049,7 +1057,14 @@ void snd_usbmidi_disconnect(struct list_head* p) int i; umidi = list_entry(p, struct snd_usb_midi, list); - del_timer_sync(&umidi->error_timer); + /* + * an URB's completion handler may start the timer and + * a timer may submit an URB. To reliably break the cycle + * a flag under lock must be used + */ + spin_lock_irq(&umidi->disc_lock); + umidi->disconnected = 1; + spin_unlock_irq(&umidi->disc_lock); for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i]; if (ep->out) @@ -1062,6 +1077,7 @@ void snd_usbmidi_disconnect(struct list_head* p) if (ep->in) usb_kill_urb(ep->in->urb); } + del_timer_sync(&umidi->error_timer); } static void snd_usbmidi_rawmidi_free(struct snd_rawmidi *rmidi) @@ -1685,6 +1701,7 @@ int snd_usb_create_midi_interface(struct snd_usb_audio* chip, umidi->quirk = quirk; umidi->usb_protocol_ops = &snd_usbmidi_standard_ops; init_timer(&umidi->error_timer); + spin_lock_init(&umidi->disc_lock); umidi->error_timer.function = snd_usbmidi_error_timer; umidi->error_timer.data = (unsigned long)umidi;