diff --git a/[refs] b/[refs] index e16c6e43e044..92458e2cecf7 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: ac4dff224d8be65090f4d7d7bde5a0bba6ca90cc +refs/heads/master: 652b2db16f55a0f2afd695a8b241e82b52b13c63 diff --git a/trunk/.mailmap b/trunk/.mailmap index a62e6a84fd1e..4e83e7b52d15 100644 --- a/trunk/.mailmap +++ b/trunk/.mailmap @@ -92,7 +92,6 @@ Rudolf Marek Rui Saraiva Sachin P Sant Sam Ravnborg -Sascha Hauer S.Çağlar Onur Simon Kelley Stéphane Witzmann @@ -101,7 +100,6 @@ Tejun Heo Thomas Graf Tony Luck Tsuneo Yoshioka -Uwe Kleine-König -Uwe Kleine-König Uwe Kleine-König +Uwe Kleine-König Valdis Kletnieks diff --git a/trunk/Documentation/PCI/PCIEBUS-HOWTO.txt b/trunk/Documentation/PCI/PCIEBUS-HOWTO.txt index 6bd5f372adec..9a07e38631b0 100644 --- a/trunk/Documentation/PCI/PCIEBUS-HOWTO.txt +++ b/trunk/Documentation/PCI/PCIEBUS-HOWTO.txt @@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver. int pcie_port_service_register(struct pcie_port_service_driver *new) -This API replaces the Linux Driver Model's pci_register_driver API. A +This API replaces the Linux Driver Model's pci_module_init API. A service driver should always calls pcie_port_service_register at module init. Note that after service driver being loaded, calls such as pci_enable_device(dev) and pci_set_master(dev) are no longer diff --git a/trunk/Documentation/connector/cn_test.c b/trunk/Documentation/connector/cn_test.c index 6977c178729a..be7af146dd30 100644 --- a/trunk/Documentation/connector/cn_test.c +++ b/trunk/Documentation/connector/cn_test.c @@ -137,7 +137,7 @@ static void cn_test_timer_func(unsigned long __data) memcpy(m + 1, data, m->len); - cn_netlink_send(m, 0, GFP_ATOMIC); + cn_netlink_send(m, 0, gfp_any()); kfree(m); } @@ -160,8 +160,10 @@ static int cn_test_init(void) goto err_out; } - setup_timer(&cn_test_timer, cn_test_timer_func, 0); + init_timer(&cn_test_timer); + cn_test_timer.function = cn_test_timer_func; cn_test_timer.expires = jiffies + HZ; + cn_test_timer.data = 0; add_timer(&cn_test_timer); return 0; diff --git a/trunk/Documentation/cpu-freq/user-guide.txt b/trunk/Documentation/cpu-freq/user-guide.txt index 917918f84fc7..e3443ddcfb89 100644 --- a/trunk/Documentation/cpu-freq/user-guide.txt +++ b/trunk/Documentation/cpu-freq/user-guide.txt @@ -195,3 +195,19 @@ scaling_setspeed. By "echoing" a new frequency into this you can change the speed of the CPU, but only within the limits of scaling_min_freq and scaling_max_freq. + + +3.2 Deprecated Interfaces +------------------------- + +Depending on your kernel configuration, you might find the following +cpufreq-related files: +/proc/cpufreq +/proc/sys/cpu/*/speed +/proc/sys/cpu/*/speed-min +/proc/sys/cpu/*/speed-max + +These are files for deprecated interfaces to cpufreq, which offer far +less functionality. Because of this, these interfaces aren't described +here. + diff --git a/trunk/Documentation/filesystems/sysfs-pci.txt b/trunk/Documentation/filesystems/sysfs-pci.txt index 9f8740ca3f3b..68ef48839c04 100644 --- a/trunk/Documentation/filesystems/sysfs-pci.txt +++ b/trunk/Documentation/filesystems/sysfs-pci.txt @@ -9,7 +9,6 @@ that support it. For example, a given bus might look like this: | |-- class | |-- config | |-- device - | |-- enable | |-- irq | |-- local_cpus | |-- resource @@ -33,7 +32,6 @@ files, each with their own function. class PCI class (ascii, ro) config PCI config space (binary, rw) device PCI device (ascii, ro) - enable Whether the device is enabled (ascii, rw) irq IRQ number (ascii, ro) local_cpus nearby CPU mask (cpumask, ro) resource PCI resource host addresses (ascii, ro) @@ -59,19 +57,10 @@ used to do actual device programming from userspace. Note that some platforms don't support mmapping of certain resources, so be sure to check the return value from any attempted mmap. -The 'enable' file provides a counter that indicates how many times the device -has been enabled. If the 'enable' file currently returns '4', and a '1' is -echoed into it, it will then return '5'. Echoing a '0' into it will decrease -the count. Even when it returns to 0, though, some of the initialisation -may not be reversed. - The 'rom' file is special in that it provides read-only access to the device's ROM file, if available. It's disabled by default, however, so applications should write the string "1" to the file to enable it before attempting a read -call, and disable it following the access by writing "0" to the file. Note -that the device must be enabled for a rom read to return data succesfully. -In the event a driver is not bound to the device, it can be enabled using the -'enable' file, documented above. +call, and disable it following the access by writing "0" to the file. Accessing legacy resources through sysfs ---------------------------------------- diff --git a/trunk/Documentation/filesystems/ubifs.txt b/trunk/Documentation/filesystems/ubifs.txt index 12fedb7834c6..84da2a4ba25a 100644 --- a/trunk/Documentation/filesystems/ubifs.txt +++ b/trunk/Documentation/filesystems/ubifs.txt @@ -79,6 +79,13 @@ Mount options (*) == default. +norm_unmount (*) commit on unmount; the journal is committed + when the file-system is unmounted so that the + next mount does not have to replay the journal + and it becomes very fast; +fast_unmount do not commit on unmount; this option makes + unmount faster, but the next mount slower + because of the need to replay the journal. bulk_read read more in one go to take advantage of flash media that read faster sequentially no_bulk_read (*) do not bulk-read diff --git a/trunk/Documentation/kernel-doc-nano-HOWTO.txt b/trunk/Documentation/kernel-doc-nano-HOWTO.txt index 026ec7d57384..d73fbd2b2b45 100644 --- a/trunk/Documentation/kernel-doc-nano-HOWTO.txt +++ b/trunk/Documentation/kernel-doc-nano-HOWTO.txt @@ -43,8 +43,7 @@ Only comments so marked will be considered by the kernel-doc scripts, and any comment so marked must be in kernel-doc format. Do not use "/**" to be begin a comment block unless the comment block contains kernel-doc formatted comments. The closing comment marker for -kernel-doc comments can be either "*/" or "**/", but "*/" is -preferred in the Linux kernel tree. +kernel-doc comments can be either "*/" or "**/". Kernel-doc comments should be placed just before the function or data structure being described. @@ -64,7 +63,7 @@ Example kernel-doc function comment: * comment lines. * * The longer description can have multiple paragraphs. - */ + **/ The first line, with the short description, must be on a single line. @@ -86,7 +85,7 @@ Example kernel-doc data structure comment. * perhaps with more lines and words. * * Longer description of this structure. - */ + **/ The kernel-doc function comments describe each parameter to the function, in order, with the @name lines. diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index b182626739ea..d8362cf9909e 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -937,8 +937,6 @@ and is between 256 and 4096 characters. It is defined in the file intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option - on - Enable intel iommu driver. off Disable intel iommu driver. igfx_off [Default Off] diff --git a/trunk/Documentation/powerpc/dts-bindings/fsl/dma.txt b/trunk/Documentation/powerpc/dts-bindings/fsl/dma.txt index 0732cdd05ba1..cc453110fc46 100644 --- a/trunk/Documentation/powerpc/dts-bindings/fsl/dma.txt +++ b/trunk/Documentation/powerpc/dts-bindings/fsl/dma.txt @@ -35,30 +35,30 @@ Example: #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a4>; + reg = <82a8 4>; + ranges = <0 8100 1a4>; interrupt-parent = <&ipic>; - interrupts = <71 8>; + interrupts = <47 8>; cell-index = <0>; dma-channel@0 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <0>; - reg = <0 0x80>; + reg = <0 80>; }; dma-channel@80 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <1>; - reg = <0x80 0x80>; + reg = <80 80>; }; dma-channel@100 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <2>; - reg = <0x100 0x80>; + reg = <100 80>; }; dma-channel@180 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <3>; - reg = <0x180 0x80>; + reg = <180 80>; }; }; @@ -93,36 +93,36 @@ Example: #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; + reg = <21300 4>; + ranges = <0 21100 200>; cell-index = <0>; dma-channel@0 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 0x80>; + reg = <0 80>; cell-index = <0>; interrupt-parent = <&mpic>; - interrupts = <20 2>; + interrupts = <14 2>; }; dma-channel@80 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; + reg = <80 80>; cell-index = <1>; interrupt-parent = <&mpic>; - interrupts = <21 2>; + interrupts = <15 2>; }; dma-channel@100 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; + reg = <100 80>; cell-index = <2>; interrupt-parent = <&mpic>; - interrupts = <22 2>; + interrupts = <16 2>; }; dma-channel@180 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; + reg = <180 80>; cell-index = <3>; interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <17 2>; }; }; diff --git a/trunk/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/trunk/Documentation/powerpc/dts-bindings/fsl/esdhc.txt deleted file mode 100644 index 600846557763..000000000000 --- a/trunk/Documentation/powerpc/dts-bindings/fsl/esdhc.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Freescale Enhanced Secure Digital Host Controller (eSDHC) - -The Enhanced Secure Digital Host Controller provides an interface -for MMC, SD, and SDIO types of memory cards. - -Required properties: - - compatible : should be - "fsl,-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors. - "fsl,-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors. - - reg : should contain eSDHC registers location and length. - - interrupts : should contain eSDHC interrupt. - - interrupt-parent : interrupt source phandle. - - clock-frequency : specifies eSDHC base clock frequency. - -Example: - -sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; -}; diff --git a/trunk/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/trunk/Documentation/powerpc/dts-bindings/fsl/ssi.txt index 731332288931..a2d963998a65 100644 --- a/trunk/Documentation/powerpc/dts-bindings/fsl/ssi.txt +++ b/trunk/Documentation/powerpc/dts-bindings/fsl/ssi.txt @@ -30,8 +30,6 @@ Required properties: - fsl,capture-dma: phandle to a node for the DMA channel to use for capture (recording) of audio. This is typically dictated by SOC design. See the notes below. -- fsl,fifo-depth: the number of elements in the transmit and receive FIFOs. - This number is the maximum allowed value for SFCSR[TFWM0]. Optional properties: - codec-handle : phandle to a 'codec' node that defines an audio diff --git a/trunk/Documentation/tracers/mmiotrace.txt b/trunk/Documentation/tracers/mmiotrace.txt index 5731c67abc55..cde23b4a12a1 100644 --- a/trunk/Documentation/tracers/mmiotrace.txt +++ b/trunk/Documentation/tracers/mmiotrace.txt @@ -78,10 +78,12 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If events were lost, the trace is incomplete. You should enlarge the buffers and try again. Buffers are enlarged by first seeing how large the current buffers are: -$ cat /debug/tracing/buffer_size_kb +$ cat /debug/tracing/trace_entries gives you a number. Approximately double this number and write it back, for instance: -$ echo 128000 > /debug/tracing/buffer_size_kb +$ echo 0 > /debug/tracing/tracing_enabled +$ echo 128000 > /debug/tracing/trace_entries +$ echo 1 > /debug/tracing/tracing_enabled Then start again from the top. If you are doing a trace for a driver project, e.g. Nouveau, you should also diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index e784b358b335..474ec0c53272 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -911,7 +911,7 @@ S: Maintained BLACKFIN ARCHITECTURE P: Bryan Wu M: cooloney@kernel.org -L: uclinux-dist-devel@blackfin.uclinux.org +L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported @@ -1021,14 +1021,6 @@ M: mb@bu3sch.de W: http://bu3sch.de/btgpio.php S: Maintained -BTRFS FILE SYSTEM -P: Chris Mason -M: chris.mason@oracle.com -L: linux-btrfs@vger.kernel.org -W: http://btrfs.wiki.kernel.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git -S: Maintained - BTTV VIDEO4LINUX DRIVER P: Mauro Carvalho Chehab M: mchehab@infradead.org @@ -1202,8 +1194,6 @@ S: Supported CONTROL GROUPS (CGROUPS) P: Paul Menage M: menage@google.com -P: Li Zefan -M: lizf@cn.fujitsu.com L: containers@lists.linux-foundation.org S: Maintained @@ -1905,10 +1895,10 @@ W: http://gigaset307x.sourceforge.net/ S: Maintained HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER -P: Frank Seidel -M: frank@f-seidel.de -L: lm-sensors@lm-sensors.org -W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/ +P: Robert Love +M: rlove@rlove.org +M: linux-kernel@vger.kernel.org +W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/ S: Maintained GSPCA FINEPIX SUBDRIVER @@ -2222,7 +2212,7 @@ P: Sean Hefty M: sean.hefty@intel.com P: Hal Rosenstock M: hal.rosenstock@gmail.com -L: general@lists.openfabrics.org (moderated for non-subscribers) +L: general@lists.openfabrics.org W: http://www.openib.org/ T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported @@ -3539,12 +3529,6 @@ S: Maintained PXA MMCI DRIVER S: Orphan -PXA RTC DRIVER -P: Robert Jarzmik -M: robert.jarzmik@free.fr -L: rtc-linux@googlegroups.com -S: Maintained - QLOGIC QLA2XXX FC-SCSI DRIVER P: Andrew Vasquez M: linux-driver@qlogic.com @@ -4293,8 +4277,8 @@ P: Rajiv Andrade M: srajiv@linux.vnet.ibm.com W: http://tpmdd.sourceforge.net P: Marcel Selhorst -M: m.selhorst@sirrix.com -W: http://www.sirrix.com +M: tpm@selhorst.net +W: http://www.prosec.rub.de/tpm/ L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained @@ -4857,7 +4841,6 @@ P: Ingo Molnar M: mingo@redhat.com P: H. Peter Anvin M: hpa@zytor.com -M: x86@kernel.org L: linux-kernel@vger.kernel.org T: git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git S: Maintained @@ -4924,11 +4907,11 @@ L: zd1211-devs@lists.sourceforge.net (subscribers-only) S: Maintained ZR36067 VIDEO FOR LINUX DRIVER +P: Ronald Bultje +M: rbultje@ronald.bitfreak.net L: mjpeg-users@lists.sourceforge.net -L: linux-media@vger.kernel.org W: http://mjpeg.sourceforge.net/driver-zoran/ -T: Mercurial http://linuxtv.org/hg/v4l-dvb -S: Odd Fixes +S: Maintained ZS DECSTATION Z85C30 SERIAL DRIVER P: Maciej W. Rozycki diff --git a/trunk/Makefile b/trunk/Makefile index 59cf6dacec07..7715b2c14fb4 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 29 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc3 NAME = Erotic Pickled Herring # *DOCUMENTATION* @@ -389,7 +389,6 @@ PHONY += outputmakefile # output directory. outputmakefile: ifneq ($(KBUILD_SRC),) - $(Q)ln -fsn $(srctree) source $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) endif @@ -947,6 +946,7 @@ ifneq ($(KBUILD_SRC),) mkdir -p include2; \ ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ fi + ln -fsn $(srctree) source endif # prepare2 creates a makefile if using a separate output directory diff --git a/trunk/arch/alpha/include/asm/bug.h b/trunk/arch/alpha/include/asm/bug.h index 1720c8ad86fe..7b85b7c93709 100644 --- a/trunk/arch/alpha/include/asm/bug.h +++ b/trunk/arch/alpha/include/asm/bug.h @@ -8,12 +8,12 @@ /* ??? Would be nice to use .gprel32 here, but we can't be sure that the function loaded the GP, so this could fail in modules. */ -#define BUG() do { \ +#define BUG() { \ __asm__ __volatile__( \ "call_pal %0 # bugchk\n\t" \ ".long %1\n\t.8byte %2" \ : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \ - for ( ; ; ); } while (0) + for ( ; ; ); } #define HAVE_ARCH_BUG #endif diff --git a/trunk/arch/alpha/kernel/process.c b/trunk/arch/alpha/kernel/process.c index 8d0097f10208..f238370c907d 100644 --- a/trunk/arch/alpha/kernel/process.c +++ b/trunk/arch/alpha/kernel/process.c @@ -93,8 +93,8 @@ common_shutdown_1(void *generic_ptr) if (cpuid != boot_cpuid) { flags |= 0x00040000UL; /* "remain halted" */ *pflags = flags; - set_cpu_present(cpuid, false); - set_cpu_possible(cpuid, false); + cpu_clear(cpuid, cpu_present_map); + cpu_clear(cpuid, cpu_possible_map); halt(); } #endif @@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr) #ifdef CONFIG_SMP /* Wait for the secondaries to halt. */ - set_cpu_present(boot_cpuid, false); - set_cpu_possible(boot_cpuid, false); + cpu_clear(boot_cpuid, cpu_present_map); + cpu_clear(boot_cpuid, cpu_possible_map); while (cpus_weight(cpu_present_map)) barrier(); #endif diff --git a/trunk/arch/alpha/kernel/smp.c b/trunk/arch/alpha/kernel/smp.c index b1fe5674c3a1..00f1dc3dfd5f 100644 --- a/trunk/arch/alpha/kernel/smp.c +++ b/trunk/arch/alpha/kernel/smp.c @@ -120,12 +120,12 @@ void __cpuinit smp_callin(void) { int cpuid = hard_smp_processor_id(); + cpumask_t mask = cpu_online_map; - if (cpu_online(cpuid)) { + if (cpu_test_and_set(cpuid, mask)) { printk("??, cpu 0x%x already present??\n", cpuid); BUG(); } - set_cpu_online(cpuid, true); /* Turn on machine checks. */ wrmces(7); @@ -436,8 +436,8 @@ setup_smp(void) ((char *)cpubase + i*hwrpb->processor_size); if ((cpu->flags & 0x1cc) == 0x1cc) { smp_num_probed++; - set_cpu_possible(i, true); - set_cpu_present(i, true); + cpu_set(i, cpu_possible_map); + cpu_set(i, cpu_present_map); cpu->pal_revision = boot_cpu_palrev; } @@ -470,8 +470,8 @@ smp_prepare_cpus(unsigned int max_cpus) /* Nothing to do on a UP box, or when told not to. */ if (smp_num_probed == 1 || max_cpus == 0) { - init_cpu_possible(cpumask_of(boot_cpuid)); - init_cpu_present(cpumask_of(boot_cpuid)); + cpu_possible_map = cpumask_of_cpu(boot_cpuid); + cpu_present_map = cpumask_of_cpu(boot_cpuid); printk(KERN_INFO "SMP mode deactivated.\n"); return; } diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S index 85040cfeb5e5..77b047475539 100644 --- a/trunk/arch/arm/kernel/entry-armv.S +++ b/trunk/arch/arm/kernel/entry-armv.S @@ -650,7 +650,6 @@ ENTRY(fp_enter) no_fp: mov pc, lr __und_usr_unknown: - enable_irq mov r0, sp adr lr, ret_from_exception b do_undefinstr diff --git a/trunk/arch/arm/kernel/entry-common.S b/trunk/arch/arm/kernel/entry-common.S index 49a6ba926c2b..06269ea375c5 100644 --- a/trunk/arch/arm/kernel/entry-common.S +++ b/trunk/arch/arm/kernel/entry-common.S @@ -136,7 +136,7 @@ ENTRY(mcount) ldmia sp!, {r0-r3, pc} trace: - ldr r1, [fp, #-4] @ lr of instrumented routine + ldr r1, [fp, #-4] mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc diff --git a/trunk/arch/arm/kernel/irq.c b/trunk/arch/arm/kernel/irq.c index 363db186cb93..7141cee1fab7 100644 --- a/trunk/arch/arm/kernel/irq.c +++ b/trunk/arch/arm/kernel/irq.c @@ -101,7 +101,7 @@ int show_interrupts(struct seq_file *p, void *v) /* Handle bad interrupts */ static struct irq_desc bad_irq_desc = { .handle_irq = handle_bad_irq, - .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), + .lock = SPIN_LOCK_UNLOCKED }; /* diff --git a/trunk/arch/arm/kernel/machine_kexec.c b/trunk/arch/arm/kernel/machine_kexec.c index 598ca61e7bca..440dc62cdc3a 100644 --- a/trunk/arch/arm/kernel/machine_kexec.c +++ b/trunk/arch/arm/kernel/machine_kexec.c @@ -13,8 +13,8 @@ #include #include -extern const unsigned char relocate_new_kernel[]; -extern const unsigned int relocate_new_kernel_size; +const extern unsigned char relocate_new_kernel[]; +const extern unsigned int relocate_new_kernel_size; extern void setup_mm_for_reboot(char mode); diff --git a/trunk/arch/arm/mach-msm/board-halibut.c b/trunk/arch/arm/mach-msm/board-halibut.c index e61967dde9a1..c2a96e3965a6 100644 --- a/trunk/arch/arm/mach-msm/board-halibut.c +++ b/trunk/arch/arm/mach-msm/board-halibut.c @@ -27,7 +27,6 @@ #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-omap1/devices.c b/trunk/arch/arm/mach-omap1/devices.c index ba5d7c08dc17..77382d8b6b2f 100644 --- a/trunk/arch/arm/mach-omap1/devices.c +++ b/trunk/arch/arm/mach-omap1/devices.c @@ -181,7 +181,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, } size = OMAP1_MMC_SIZE; - omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]); + omap_mmc_add(i, base, size, irq, mmc_data[i]); }; } diff --git a/trunk/arch/arm/mach-omap1/mcbsp.c b/trunk/arch/arm/mach-omap1/mcbsp.c index 575ba31295cf..ca7a0cc1707c 100644 --- a/trunk/arch/arm/mach-omap1/mcbsp.c +++ b/trunk/arch/arm/mach-omap1/mcbsp.c @@ -28,8 +28,81 @@ #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) +struct mcbsp_internal_clk { + struct clk clk; + struct clk **childs; + int n_childs; +}; + #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) -const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; +static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) +{ + const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; + int i; + + mclk->n_childs = ARRAY_SIZE(clk_names); + mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *), + GFP_KERNEL); + + for (i = 0; i < mclk->n_childs; i++) { + /* We fake a platform device to get correct device id */ + struct platform_device pdev; + + pdev.dev.bus = &platform_bus_type; + pdev.id = mclk->clk.id; + mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]); + if (IS_ERR(mclk->childs[i])) + printk(KERN_ERR "Could not get clock %s (%d).\n", + clk_names[i], mclk->clk.id); + } +} + +static int omap_mcbsp_clk_enable(struct clk *clk) +{ + struct mcbsp_internal_clk *mclk = container_of(clk, + struct mcbsp_internal_clk, clk); + int i; + + for (i = 0; i < mclk->n_childs; i++) + clk_enable(mclk->childs[i]); + return 0; +} + +static void omap_mcbsp_clk_disable(struct clk *clk) +{ + struct mcbsp_internal_clk *mclk = container_of(clk, + struct mcbsp_internal_clk, clk); + int i; + + for (i = 0; i < mclk->n_childs; i++) + clk_disable(mclk->childs[i]); +} + +static struct mcbsp_internal_clk omap_mcbsp_clks[] = { + { + .clk = { + .name = "mcbsp_clk", + .id = 1, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 3, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, +}; + +#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) +#else +#define omap_mcbsp_clks_size 0 +static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks; +static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) +{ } #endif static void omap1_mcbsp_request(unsigned int id) @@ -94,9 +167,8 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, - }, + .clk_name = "mcbsp_clk", + }, { .phys_base = OMAP1510_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP2_RX, @@ -112,8 +184,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, + .clk_name = "mcbsp_clk", }, }; #define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata) @@ -131,8 +202,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP1610_MCBSP2_BASE, @@ -149,8 +219,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, + .clk_name = "mcbsp_clk", }, }; #define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata) @@ -161,6 +230,15 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { + int i; + + for (i = 0; i < omap_mcbsp_clks_size; i++) { + if (cpu_is_omap15xx() || cpu_is_omap16xx()) { + omap_mcbsp_clk_init(&omap_mcbsp_clks[i]); + clk_register(&omap_mcbsp_clks[i].clk); + } + } + if (cpu_is_omap730()) omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) diff --git a/trunk/arch/arm/mach-omap2/devices.c b/trunk/arch/arm/mach-omap2/devices.c index ce03fa750775..9d7216ff6c9f 100644 --- a/trunk/arch/arm/mach-omap2/devices.c +++ b/trunk/arch/arm/mach-omap2/devices.c @@ -421,7 +421,6 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { int i; - char *name; for (i = 0; i < nr_controllers; i++) { unsigned long base, size; @@ -451,14 +450,12 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, continue; } - if (cpu_is_omap2420()) { + if (cpu_is_omap2420()) size = OMAP2420_MMC_SIZE; - name = "mmci-omap"; - } else { + else size = HSMMC_SIZE; - name = "mmci-omap-hs"; - } - omap_mmc_add(name, i, base, size, irq, mmc_data[i]); + + omap_mmc_add(i, base, size, irq, mmc_data[i]); }; } diff --git a/trunk/arch/arm/mach-omap2/id.c b/trunk/arch/arm/mach-omap2/id.c index b52a02fc7cd6..b0f8e7d62798 100644 --- a/trunk/arch/arm/mach-omap2/id.c +++ b/trunk/arch/arm/mach-omap2/id.c @@ -172,13 +172,9 @@ void __init omap34xx_check_revision(void) omap_revision = OMAP3430_REV_ES3_0; rev_name = "ES3.0"; break; - case 4: - omap_revision = OMAP3430_REV_ES3_1; - rev_name = "ES3.1"; - break; default: /* Use the latest known revision as default */ - omap_revision = OMAP3430_REV_ES3_1; + omap_revision = OMAP3430_REV_ES3_0; rev_name = "Unknown revision\n"; } } diff --git a/trunk/arch/arm/mach-omap2/irq.c b/trunk/arch/arm/mach-omap2/irq.c index 9ba20d985dda..636e2821af7d 100644 --- a/trunk/arch/arm/mach-omap2/irq.c +++ b/trunk/arch/arm/mach-omap2/irq.c @@ -134,7 +134,6 @@ static struct irq_chip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, - .disable = omap_mask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) diff --git a/trunk/arch/arm/mach-omap2/mcbsp.c b/trunk/arch/arm/mach-omap2/mcbsp.c index a9e631fc1134..e20023c9d15d 100644 --- a/trunk/arch/arm/mach-omap2/mcbsp.c +++ b/trunk/arch/arm/mach-omap2/mcbsp.c @@ -24,7 +24,106 @@ #include #include -const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; +struct mcbsp_internal_clk { + struct clk clk; + struct clk **childs; + int n_childs; +}; + +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) +{ + const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; + int i; + + mclk->n_childs = ARRAY_SIZE(clk_names); + mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *), + GFP_KERNEL); + + for (i = 0; i < mclk->n_childs; i++) { + /* We fake a platform device to get correct device id */ + struct platform_device pdev; + + pdev.dev.bus = &platform_bus_type; + pdev.id = mclk->clk.id; + mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]); + if (IS_ERR(mclk->childs[i])) + printk(KERN_ERR "Could not get clock %s (%d).\n", + clk_names[i], mclk->clk.id); + } +} + +static int omap_mcbsp_clk_enable(struct clk *clk) +{ + struct mcbsp_internal_clk *mclk = container_of(clk, + struct mcbsp_internal_clk, clk); + int i; + + for (i = 0; i < mclk->n_childs; i++) + clk_enable(mclk->childs[i]); + return 0; +} + +static void omap_mcbsp_clk_disable(struct clk *clk) +{ + struct mcbsp_internal_clk *mclk = container_of(clk, + struct mcbsp_internal_clk, clk); + int i; + + for (i = 0; i < mclk->n_childs; i++) + clk_disable(mclk->childs[i]); +} + +static struct mcbsp_internal_clk omap_mcbsp_clks[] = { + { + .clk = { + .name = "mcbsp_clk", + .id = 1, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 2, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 3, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 4, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 5, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, +}; + +#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) +#else +#define omap_mcbsp_clks_size 0 +static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks; +static inline void omap_mcbsp_clk_init(struct clk *clk) +{ } +#endif static void omap2_mcbsp2_mux_setup(void) { @@ -57,8 +156,7 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -67,8 +165,7 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, }; #define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) @@ -86,8 +183,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -96,8 +192,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP2430_MCBSP3_BASE, @@ -106,8 +201,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP2430_MCBSP4_BASE, @@ -116,8 +210,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP2430_MCBSP5_BASE, @@ -126,8 +219,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, }; #define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) @@ -145,8 +237,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -155,8 +246,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -165,8 +255,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -175,8 +264,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -185,8 +273,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, + .clk_name = "mcbsp_clk", }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) @@ -197,6 +284,14 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { static int __init omap2_mcbsp_init(void) { + int i; + + for (i = 0; i < omap_mcbsp_clks_size; i++) { + /* Once we call clk_get inside init, we do not register it */ + omap_mcbsp_clk_init(&omap_mcbsp_clks[i]); + clk_register(&omap_mcbsp_clks[i].clk); + } + if (cpu_is_omap2420()) omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ; if (cpu_is_omap2430()) diff --git a/trunk/arch/arm/mach-omap2/sleep24xx.S b/trunk/arch/arm/mach-omap2/sleep24xx.S index bf9e96105e11..43336b93b21c 100644 --- a/trunk/arch/arm/mach-omap2/sleep24xx.S +++ b/trunk/arch/arm/mach-omap2/sleep24xx.S @@ -93,8 +93,9 @@ ENTRY(omap24xx_cpu_suspend) orr r4, r4, #0x40 @ enable self refresh on idle req mov r5, #0x2000 @ set delay (DPLL relock + DLL relock) str r4, [r2] @ make it so + mov r2, #0 nop - mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt + mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt nop loop: subs r5, r5, #0x1 @ awake, wait just a bit diff --git a/trunk/arch/arm/mach-omap2/timer-gp.c b/trunk/arch/arm/mach-omap2/timer-gp.c index 9fc13a2cc3f4..ae6036300f60 100644 --- a/trunk/arch/arm/mach-omap2/timer-gp.c +++ b/trunk/arch/arm/mach-omap2/timer-gp.c @@ -118,8 +118,7 @@ static void __init omap2_gp_clockevent_init(void) clockevent_gpt.max_delta_ns = clockevent_delta2ns(0xffffffff, &clockevent_gpt); clockevent_gpt.min_delta_ns = - clockevent_delta2ns(3, &clockevent_gpt); - /* Timer internal resynch latency. */ + clockevent_delta2ns(1, &clockevent_gpt); clockevent_gpt.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_gpt); diff --git a/trunk/arch/arm/mach-pxa/dma.c b/trunk/arch/arm/mach-pxa/dma.c index 7de17fc5d54b..b1514fb20d3a 100644 --- a/trunk/arch/arm/mach-pxa/dma.c +++ b/trunk/arch/arm/mach-pxa/dma.c @@ -121,16 +121,6 @@ int __init pxa_init_dma(int num_ch) if (dma_channels == NULL) return -ENOMEM; - /* dma channel priorities on pxa2xx processors: - * ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH - * ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM - * ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW - */ - for (i = 0; i < num_ch; i++) { - DCSR(i) = 0; - dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW); - } - ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); if (ret) { printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n"); @@ -138,6 +128,14 @@ int __init pxa_init_dma(int num_ch) return ret; } + /* dma channel priorities on pxa2xx processors: + * ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH + * ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM + * ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW + */ + for (i = 0; i < num_ch; i++) + dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW); + num_dma_channels = num_ch; return 0; } diff --git a/trunk/arch/arm/mach-pxa/include/mach/regs-ac97.h b/trunk/arch/arm/mach-pxa/include/mach/regs-ac97.h index b8d14bd9ae59..e41b9d202b8c 100644 --- a/trunk/arch/arm/mach-pxa/include/mach/regs-ac97.h +++ b/trunk/arch/arm/mach-pxa/include/mach/regs-ac97.h @@ -1,8 +1,6 @@ #ifndef __ASM_ARCH_REGS_AC97_H #define __ASM_ARCH_REGS_AC97_H -#include - /* * AC97 Controller registers */ diff --git a/trunk/arch/arm/mach-pxa/include/mach/regs-ssp.h b/trunk/arch/arm/mach-pxa/include/mach/regs-ssp.h index cf31986f6f05..3c04cde2cf1f 100644 --- a/trunk/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/trunk/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -41,9 +41,6 @@ #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#endif - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define SSCR0_EDSS (1 << 20) /* Extended data size select */ #define SSCR0_NCS (1 << 21) /* Network clock select */ #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ diff --git a/trunk/arch/arm/mach-pxa/pxa300.c b/trunk/arch/arm/mach-pxa/pxa300.c index 83fb609b6eb7..f735e58e6669 100644 --- a/trunk/arch/arm/mach-pxa/pxa300.c +++ b/trunk/arch/arm/mach-pxa/pxa300.c @@ -88,13 +88,13 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = { static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0); static struct clk_lookup common_clkregs[] = { - INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"), }; static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); static struct clk_lookup pxa310_clkregs[] = { - INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL), + INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"), }; static int __init pxa300_init(void) diff --git a/trunk/arch/arm/mach-pxa/pxa320.c b/trunk/arch/arm/mach-pxa/pxa320.c index 36f066196fa2..effe408c186f 100644 --- a/trunk/arch/arm/mach-pxa/pxa320.c +++ b/trunk/arch/arm/mach-pxa/pxa320.c @@ -83,7 +83,7 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = { static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0); static struct clk_lookup pxa320_clkregs[] = { - INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"), }; static int __init pxa320_init(void) diff --git a/trunk/arch/arm/mach-sa1100/generic.c b/trunk/arch/arm/mach-sa1100/generic.c index 23cfdd593954..c1fbd5b5f9c4 100644 --- a/trunk/arch/arm/mach-sa1100/generic.c +++ b/trunk/arch/arm/mach-sa1100/generic.c @@ -289,7 +289,7 @@ static struct platform_device sa11x0pcmcia_device = { }; static struct platform_device sa11x0mtd_device = { - .name = "sa1100-mtd", + .name = "flash", .id = -1, }; diff --git a/trunk/arch/arm/mm/fault-armv.c b/trunk/arch/arm/mm/fault-armv.c index bc0099d5ae85..81d0b8772de3 100644 --- a/trunk/arch/arm/mm/fault-armv.c +++ b/trunk/arch/arm/mm/fault-armv.c @@ -66,10 +66,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) * fault (ie, is old), we can safely ignore any issues. */ if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) { - unsigned long pfn = pte_pfn(entry); - flush_cache_page(vma, address, pfn); - outer_flush_range((pfn << PAGE_SHIFT), - (pfn << PAGE_SHIFT) + PAGE_SIZE); + flush_cache_page(vma, address, pte_pfn(entry)); pte_val(entry) &= ~L_PTE_MT_MASK; pte_val(entry) |= shared_pte_mask; set_pte_at(vma->vm_mm, address, pte, entry); diff --git a/trunk/arch/arm/plat-omap/devices.c b/trunk/arch/arm/plat-omap/devices.c index 208dbb121f47..ac15c23fd5da 100644 --- a/trunk/arch/arm/plat-omap/devices.c +++ b/trunk/arch/arm/plat-omap/devices.c @@ -200,15 +200,14 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, /* * Register MMC devices. Called from mach-omap1 and mach-omap2 device init. */ -int __init omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data) +int __init omap_mmc_add(int id, unsigned long base, unsigned long size, + unsigned int irq, struct omap_mmc_platform_data *data) { struct platform_device *pdev; struct resource res[OMAP_MMC_NR_RES]; int ret; - pdev = platform_device_alloc(name, id); + pdev = platform_device_alloc("mmci-omap", id); if (!pdev) return -ENOMEM; diff --git a/trunk/arch/arm/plat-omap/dma.c b/trunk/arch/arm/plat-omap/dma.c index 47ec77af4ccb..e77373c39f8c 100644 --- a/trunk/arch/arm/plat-omap/dma.c +++ b/trunk/arch/arm/plat-omap/dma.c @@ -709,7 +709,6 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->dev_name = dev_name; chan->callback = callback; chan->data = data; - chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 if (cpu_class_is_omap2()) { @@ -1889,11 +1888,11 @@ static int omap2_dma_handle_ch(int ch) status = dma_read(CSR(ch)); } - dma_write(status, CSR(ch)); - if (likely(dma_chan[ch].callback != NULL)) dma_chan[ch].callback(ch, status, dma_chan[ch].data); + dma_write(status, CSR(ch)); + return 0; } diff --git a/trunk/arch/arm/plat-omap/include/mach/cpu.h b/trunk/arch/arm/plat-omap/include/mach/cpu.h index a8e1178a9468..b2062f1175de 100644 --- a/trunk/arch/arm/plat-omap/include/mach/cpu.h +++ b/trunk/arch/arm/plat-omap/include/mach/cpu.h @@ -339,7 +339,6 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3430_REV_ES2_0 0x34301034 #define OMAP3430_REV_ES2_1 0x34302034 #define OMAP3430_REV_ES3_0 0x34303034 -#define OMAP3430_REV_ES3_1 0x34304034 /* * omap_chip bits diff --git a/trunk/arch/arm/plat-omap/include/mach/mcbsp.h b/trunk/arch/arm/plat-omap/include/mach/mcbsp.h index 113c2466c86a..eef873db3d48 100644 --- a/trunk/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/trunk/arch/arm/plat-omap/include/mach/mcbsp.h @@ -344,8 +344,7 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; - char const **clk_names; - int num_clks; + char const *clk_name; }; struct omap_mcbsp { @@ -377,8 +376,7 @@ struct omap_mcbsp { /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; struct omap_mcbsp_platform_data *pdata; - struct clk **clks; - int num_clks; + struct clk *clk; }; extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count; diff --git a/trunk/arch/arm/plat-omap/include/mach/mmc.h b/trunk/arch/arm/plat-omap/include/mach/mmc.h index 73a9e15031b1..031250f02805 100644 --- a/trunk/arch/arm/plat-omap/include/mach/mmc.h +++ b/trunk/arch/arm/plat-omap/include/mach/mmc.h @@ -115,9 +115,8 @@ void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); -int omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data); +int omap_mmc_add(int id, unsigned long base, unsigned long size, + unsigned int irq, struct omap_mmc_platform_data *data); #else static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) @@ -127,9 +126,8 @@ static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { } -static inline int omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data) +static inline int omap_mmc_add(int id, unsigned long base, unsigned long size, + unsigned int irq, struct omap_mmc_platform_data *data) { return 0; } diff --git a/trunk/arch/arm/plat-omap/mcbsp.c b/trunk/arch/arm/plat-omap/mcbsp.c index e5842e30e534..f2401a831f99 100644 --- a/trunk/arch/arm/plat-omap/mcbsp.c +++ b/trunk/arch/arm/plat-omap/mcbsp.c @@ -214,7 +214,6 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; - int i; int err; if (!omap_mcbsp_check_valid_id(id)) { @@ -226,8 +225,7 @@ int omap_mcbsp_request(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) mcbsp->pdata->ops->request(id); - for (i = 0; i < mcbsp->num_clks; i++) - clk_enable(mcbsp->clks[i]); + clk_enable(mcbsp->clk); spin_lock(&mcbsp->lock); if (!mcbsp->free) { @@ -278,7 +276,6 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { struct omap_mcbsp *mcbsp; - int i; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -289,8 +286,7 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - for (i = mcbsp->num_clks - 1; i >= 0; i--) - clk_disable(mcbsp->clks[i]); + clk_disable(mcbsp->clk); spin_lock(&mcbsp->lock); if (mcbsp->free) { @@ -876,7 +872,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; struct omap_mcbsp *mcbsp; int id = pdev->id - 1; - int i; int ret = 0; if (!pdata) { @@ -921,25 +916,14 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dma_rx_sync = pdata->dma_rx_sync; mcbsp->dma_tx_sync = pdata->dma_tx_sync; - if (pdata->num_clks) { - mcbsp->num_clks = pdata->num_clks; - mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *), - GFP_KERNEL); - if (!mcbsp->clks) { - ret = -ENOMEM; - goto exit; - } - for (i = 0; i < mcbsp->num_clks; i++) { - mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]); - if (IS_ERR(mcbsp->clks[i])) { - dev_err(&pdev->dev, - "Invalid %s configuration for McBSP%d.\n", - pdata->clk_names[i], mcbsp->id); - ret = PTR_ERR(mcbsp->clks[i]); - goto err_clk; - } - } - + if (pdata->clk_name) + mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(mcbsp->clk)) { + dev_err(&pdev->dev, + "Invalid clock configuration for McBSP%d.\n", + mcbsp->id); + ret = PTR_ERR(mcbsp->clk); + goto err_clk; } mcbsp->pdata = pdata; @@ -948,9 +932,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) return 0; err_clk: - while (i--) - clk_put(mcbsp->clks[i]); - kfree(mcbsp->clks); iounmap(mcbsp->io_base); err_ioremap: mcbsp->free = 0; @@ -961,7 +942,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); - int i; platform_set_drvdata(pdev, NULL); if (mcbsp) { @@ -970,18 +950,12 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); - for (i = mcbsp->num_clks - 1; i >= 0; i--) { - clk_disable(mcbsp->clks[i]); - clk_put(mcbsp->clks[i]); - } + clk_disable(mcbsp->clk); + clk_put(mcbsp->clk); iounmap(mcbsp->io_base); - if (mcbsp->num_clks) { - kfree(mcbsp->clks); - mcbsp->clks = NULL; - mcbsp->num_clks = 0; - } + mcbsp->clk = NULL; mcbsp->free = 0; mcbsp->dev = NULL; } diff --git a/trunk/arch/blackfin/Kconfig b/trunk/arch/blackfin/Kconfig index 8f1f97d56e1e..a949c4fbbddd 100644 --- a/trunk/arch/blackfin/Kconfig +++ b/trunk/arch/blackfin/Kconfig @@ -169,51 +169,26 @@ config BF542 help BF542 Processor Support. -config BF542M - bool "BF542m" - help - BF542 Processor Support. - config BF544 bool "BF544" help BF544 Processor Support. -config BF544M - bool "BF544m" - help - BF544 Processor Support. - config BF547 bool "BF547" help BF547 Processor Support. -config BF547M - bool "BF547m" - help - BF547 Processor Support. - config BF548 bool "BF548" help BF548 Processor Support. -config BF548M - bool "BF548m" - help - BF548 Processor Support. - config BF549 bool "BF549" help BF549 Processor Support. -config BF549M - bool "BF549m" - help - BF549 Processor Support. - config BF561 bool "BF561" help @@ -249,39 +224,39 @@ config TICK_SOURCE_SYSTMR0 config BF_REV_MIN int - default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 0 if (BF51x || BF52x || BF54x) default 2 if (BF537 || BF536 || BF534) - default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM) + default 3 if (BF561 ||BF533 || BF532 || BF531) default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) - default 3 if (BF537 || BF536 || BF534 || BF54xM) + default 2 if (BF51x || BF52x || BF54x) + default 3 if (BF537 || BF536 || BF534) default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM)) + default BF_REV_0_1 if (BF51x || BF52x || BF54x) default BF_REV_0_2 if (BF534 || BF536 || BF537) - default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) + default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF51x || BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || BF54x) config BF_REV_0_1 bool "0.1" - depends on (BF52x || (BF54x && !BF54xM)) + depends on (BF52x || BF54x) config BF_REV_0_2 bool "0.2" - depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM)) + depends on (BF52x || BF537 || BF536 || BF534 || BF54x) config BF_REV_0_3 bool "0.3" - depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) + depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) config BF_REV_0_4 bool "0.4" @@ -318,14 +293,9 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y -config BF54xM - bool - depends on (BF542M || BF544M || BF547M || BF548M || BF549M) - default y - config BF54x bool - depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM) + depends on (BF542 || BF544 || BF547 || BF548 || BF549) default y config MEM_GENERIC_BOARD diff --git a/trunk/arch/blackfin/Makefile b/trunk/arch/blackfin/Makefile index d54c8283825c..e550c8d46066 100644 --- a/trunk/arch/blackfin/Makefile +++ b/trunk/arch/blackfin/Makefile @@ -21,67 +21,57 @@ KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings -machine-$(CONFIG_BF512) := bf518 -machine-$(CONFIG_BF514) := bf518 -machine-$(CONFIG_BF516) := bf518 -machine-$(CONFIG_BF518) := bf518 -machine-$(CONFIG_BF522) := bf527 -machine-$(CONFIG_BF523) := bf527 -machine-$(CONFIG_BF524) := bf527 -machine-$(CONFIG_BF525) := bf527 -machine-$(CONFIG_BF526) := bf527 -machine-$(CONFIG_BF527) := bf527 -machine-$(CONFIG_BF531) := bf533 -machine-$(CONFIG_BF532) := bf533 -machine-$(CONFIG_BF533) := bf533 -machine-$(CONFIG_BF534) := bf537 -machine-$(CONFIG_BF536) := bf537 -machine-$(CONFIG_BF537) := bf537 -machine-$(CONFIG_BF538) := bf538 -machine-$(CONFIG_BF539) := bf538 -machine-$(CONFIG_BF542) := bf548 -machine-$(CONFIG_BF542M) := bf548 -machine-$(CONFIG_BF544) := bf548 -machine-$(CONFIG_BF544M) := bf548 -machine-$(CONFIG_BF547) := bf548 -machine-$(CONFIG_BF547M) := bf548 -machine-$(CONFIG_BF548) := bf548 -machine-$(CONFIG_BF548M) := bf548 -machine-$(CONFIG_BF549) := bf548 -machine-$(CONFIG_BF549M) := bf548 -machine-$(CONFIG_BF561) := bf561 +machine-$(CONFIG_BF512) := bf518 +machine-$(CONFIG_BF514) := bf518 +machine-$(CONFIG_BF516) := bf518 +machine-$(CONFIG_BF518) := bf518 +machine-$(CONFIG_BF522) := bf527 +machine-$(CONFIG_BF523) := bf527 +machine-$(CONFIG_BF524) := bf527 +machine-$(CONFIG_BF525) := bf527 +machine-$(CONFIG_BF526) := bf527 +machine-$(CONFIG_BF527) := bf527 +machine-$(CONFIG_BF531) := bf533 +machine-$(CONFIG_BF532) := bf533 +machine-$(CONFIG_BF533) := bf533 +machine-$(CONFIG_BF534) := bf537 +machine-$(CONFIG_BF536) := bf537 +machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF538) := bf538 +machine-$(CONFIG_BF539) := bf538 +machine-$(CONFIG_BF542) := bf548 +machine-$(CONFIG_BF544) := bf548 +machine-$(CONFIG_BF547) := bf548 +machine-$(CONFIG_BF548) := bf548 +machine-$(CONFIG_BF549) := bf548 +machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE -cpu-$(CONFIG_BF512) := bf512 -cpu-$(CONFIG_BF514) := bf514 -cpu-$(CONFIG_BF516) := bf516 -cpu-$(CONFIG_BF518) := bf518 -cpu-$(CONFIG_BF522) := bf522 -cpu-$(CONFIG_BF523) := bf523 -cpu-$(CONFIG_BF524) := bf524 -cpu-$(CONFIG_BF525) := bf525 -cpu-$(CONFIG_BF526) := bf526 -cpu-$(CONFIG_BF527) := bf527 -cpu-$(CONFIG_BF531) := bf531 -cpu-$(CONFIG_BF532) := bf532 -cpu-$(CONFIG_BF533) := bf533 -cpu-$(CONFIG_BF534) := bf534 -cpu-$(CONFIG_BF536) := bf536 -cpu-$(CONFIG_BF537) := bf537 -cpu-$(CONFIG_BF538) := bf538 -cpu-$(CONFIG_BF539) := bf539 -cpu-$(CONFIG_BF542) := bf542 -cpu-$(CONFIG_BF542M) := bf542m -cpu-$(CONFIG_BF544) := bf544 -cpu-$(CONFIG_BF544M) := bf544m -cpu-$(CONFIG_BF547) := bf547 -cpu-$(CONFIG_BF547M) := bf547m -cpu-$(CONFIG_BF548) := bf548 -cpu-$(CONFIG_BF548M) := bf548m -cpu-$(CONFIG_BF549) := bf549 -cpu-$(CONFIG_BF549M) := bf549m -cpu-$(CONFIG_BF561) := bf561 +cpu-$(CONFIG_BF512) := bf512 +cpu-$(CONFIG_BF514) := bf514 +cpu-$(CONFIG_BF516) := bf516 +cpu-$(CONFIG_BF518) := bf518 +cpu-$(CONFIG_BF522) := bf522 +cpu-$(CONFIG_BF523) := bf523 +cpu-$(CONFIG_BF524) := bf524 +cpu-$(CONFIG_BF525) := bf525 +cpu-$(CONFIG_BF526) := bf526 +cpu-$(CONFIG_BF527) := bf527 +cpu-$(CONFIG_BF531) := bf531 +cpu-$(CONFIG_BF532) := bf532 +cpu-$(CONFIG_BF533) := bf533 +cpu-$(CONFIG_BF534) := bf534 +cpu-$(CONFIG_BF536) := bf536 +cpu-$(CONFIG_BF537) := bf537 +cpu-$(CONFIG_BF538) := bf538 +cpu-$(CONFIG_BF539) := bf539 +cpu-$(CONFIG_BF542) := bf542 +cpu-$(CONFIG_BF544) := bf544 +cpu-$(CONFIG_BF547) := bf547 +cpu-$(CONFIG_BF548) := bf548 +cpu-$(CONFIG_BF549) := bf549 +cpu-$(CONFIG_BF561) := bf561 rev-$(CONFIG_BF_REV_0_0) := 0.0 rev-$(CONFIG_BF_REV_0_1) := 0.1 diff --git a/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig b/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig index 4fdb9e04759f..defb9785c65b 100644 --- a/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/trunk/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.28-rc2 -# Fri Jan 9 17:58:41 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -150,7 +149,6 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF51x=y -CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_BFIN518F_EZBRD=y # @@ -600,10 +598,7 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_BFIN_MAC=y -CONFIG_BFIN_TX_DESC_NUM=10 -CONFIG_BFIN_RX_DESC_NUM=20 -# CONFIG_BFIN_MAC_RMII is not set +# CONFIG_BFIN_MAC is not set # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set @@ -684,7 +679,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig b/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig index 8e2b855b8db7..992424ff3153 100644 --- a/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/trunk/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig index 833128b39724..21e3c1af55ba 100644 --- a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig index 334c94b51c40..0bdf20a1af61 100644 --- a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig index 9d733436e300..2f747d6e97e2 100644 --- a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig @@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig index 4fb4108d3103..8b0a81294e65 100644 --- a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig @@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig index cb32f5624a1b..a1f766bf7d9b 100644 --- a/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig index 0f8697618aa5..cd2da6b7692c 100644 --- a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig index 042c7adfccfa..b398ca202dbd 100644 --- a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -CONFIG_BFIN_JTAG_COMM=m +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/trunk/arch/blackfin/configs/CM-BF527_defconfig b/trunk/arch/blackfin/configs/CM-BF527_defconfig index 865ed85a5760..95146948166f 100644 --- a/trunk/arch/blackfin/configs/CM-BF527_defconfig +++ b/trunk/arch/blackfin/configs/CM-BF527_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 +# Linux kernel version: 2.6.24.7 +# Fri Jul 18 18:00:41 2008 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,6 +9,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -30,16 +32,18 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,35 +52,26 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y -CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -87,7 +82,6 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -101,11 +95,9 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -114,10 +106,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # -# CONFIG_BF512 is not set -# CONFIG_BF514 is not set -# CONFIG_BF516 is not set -# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -130,32 +118,48 @@ CONFIG_BF527=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set -# CONFIG_BF538 is not set -# CONFIG_BF539 is not set # CONFIG_BF542 is not set -# CONFIG_BF542M is not set # CONFIG_BF544 is not set -# CONFIG_BF544M is not set # CONFIG_BF547 is not set -# CONFIG_BF547M is not set # CONFIG_BF548 is not set -# CONFIG_BF548M is not set # CONFIG_BF549 is not set -# CONFIG_BF549M is not set # CONFIG_BF561 is not set -CONFIG_BF_REV_MIN=0 -CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set CONFIG_BF_REV_0_1=y # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_BFIN527_EZKIT is not set +CONFIG_BFIN527_BLUETECHNIX_CM=y + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 CONFIG_IRQ_DMAR0_BLK=7 @@ -175,6 +179,7 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -200,34 +205,6 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 -# CONFIG_BFIN527_EZKIT is not set -CONFIG_BFIN527_BLUETECHNIX_CM=y -# CONFIG_BFIN526_EZBRD is not set - -# -# BF527 Specific Configuration -# - -# -# Alternative Multiplexing Scheme -# -# CONFIG_BF527_SPORT0_PORTF is not set -CONFIG_BF527_SPORT0_PORTG=y -CONFIG_BF527_SPORT0_TSCLK_PG10=y -# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -CONFIG_BF527_UART1_PORTF=y -# CONFIG_BF527_UART1_PORTG is not set -# CONFIG_BF527_NAND_D_PORTF is not set -CONFIG_BF527_NAND_D_PORTH=y - -# -# Interrupt Priority Assignment -# - -# -# Priority -# -CONFIG_IRQ_SPI=10 CONFIG_IRQ_SPI_ERROR=7 CONFIG_IRQ_NFC_ERROR=7 CONFIG_IRQ_HDMA_ERROR=7 @@ -249,6 +226,7 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -262,10 +240,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -299,12 +277,6 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y - -# -# Speed Optimizations -# -CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -313,10 +285,10 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y @@ -362,6 +334,7 @@ CONFIG_BANK_3=0xFFC0 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -372,20 +345,25 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_BFIN_SLEEP_DEEPER is not set +# CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set + +# +# Networking +# CONFIG_NET=y # @@ -398,7 +376,6 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -428,6 +405,8 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -436,7 +415,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -453,14 +431,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y + +# +# Wireless +# # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -478,8 +456,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -488,7 +464,6 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -532,7 +507,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -568,12 +542,10 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_XIP is not set +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -586,6 +558,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -606,7 +579,6 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -619,14 +591,11 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set -# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -635,7 +604,6 @@ CONFIG_BFIN_MAC_RMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -648,6 +616,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -673,15 +642,14 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set -# CONFIG_BF5xx_EPPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -705,8 +673,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -714,49 +680,44 @@ CONFIG_BFIN_OTP=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m -CONFIG_I2C_HELPER_AUTO=y # -# I2C Hardware Bus support +# I2C Algorithms # +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C system bus drivers (mostly embedded / system-on-chip) +# I2C Hardware Bus support # CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -765,41 +726,37 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y -# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -820,7 +777,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -829,7 +785,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -837,12 +792,9 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -858,31 +810,21 @@ CONFIG_BFIN_WDT=y # CONFIG_USBPCWATCHDOG is not set # -# Multifunction device drivers +# Sonics Silicon Backplane # -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_REGULATOR is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia devices +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # -# Multimedia core support +# Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# # CONFIG_DAB is not set # @@ -897,6 +839,10 @@ CONFIG_BFIN_WDT=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -904,7 +850,6 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -915,48 +860,40 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # -# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y # -# Blackfin high speed USB Support +# Blackfin high speed USB support # CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_MUSB_DMA_POLL=y -# CONFIG_USB_MUSB_DEBUG is not set +CONFIG_USB_MUSB_LOGLEVEL=0 # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# see USB_STORAGE Help for more information +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -964,10 +901,15 @@ CONFIG_MUSB_DMA_POLL=y # USB Imaging devices # # CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y # # USB port drivers # + +# +# USB Serial Converter support +# # CONFIG_USB_SERIAL is not set # @@ -976,7 +918,7 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -992,13 +934,17 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1027,59 +973,51 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_MAX6902 is not set # # Platform RTC drivers # -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y -# CONFIG_DMADEVICES is not set + +# +# Userspace I/O +# # CONFIG_UIO is not set -# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1121,11 +1059,8 @@ CONFIG_SYSFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1133,12 +1068,13 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1194,6 +1130,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1201,61 +1138,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB_TESTCASE is not set -CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set -# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1264,7 +1154,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CPLB_INFO is not set CONFIG_ACCESS_CHECK=y @@ -1273,96 +1163,10 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y -# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO is not set # # Library routines @@ -1370,7 +1174,6 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/trunk/arch/blackfin/include/asm/checksum.h b/trunk/arch/blackfin/include/asm/checksum.h index 793581fc9556..f67289a0d8d2 100644 --- a/trunk/arch/blackfin/include/asm/checksum.h +++ b/trunk/arch/blackfin/include/asm/checksum.h @@ -63,23 +63,23 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { - unsigned int carry; - - __asm__ ("%0 = %0 + %2;\n\t" - "CC = AC0;\n\t" - "%1 = CC;\n\t" - "%0 = %0 + %1;\n\t" - "%0 = %0 + %3;\n\t" - "CC = AC0;\n\t" - "%1 = CC;\n\t" - "%0 = %0 + %1;\n\t" - "%0 = %0 + %4;\n\t" - "CC = AC0;\n\t" - "%1 = CC;\n\t" - "%0 = %0 + %1;\n\t" - : "=d" (sum), "=&d" (carry) - : "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum) - : "CC"); + + __asm__ ("%0 = %0 + %1;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "%0 = %0 + %2;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "%0 = %0 + %3;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "NOP;\n\t" + : "=d" (sum) + : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum) + : "CC"); return (sum); } diff --git a/trunk/arch/blackfin/include/asm/delay.h b/trunk/arch/blackfin/include/asm/delay.h index c31f91cc1d5d..0889c3abb593 100644 --- a/trunk/arch/blackfin/include/asm/delay.h +++ b/trunk/arch/blackfin/include/asm/delay.h @@ -13,7 +13,29 @@ static inline void __delay(unsigned long loops) { -__asm__ __volatile__ ( + if (ANOMALY_05000312) { + /* Interrupted loads to loop registers -> bad */ + unsigned long tmp; + __asm__ __volatile__( + "[--SP] = LC0;" + "[--SP] = LT0;" + "[--SP] = LB0;" + "LSETUP (1f,1f) LC0 = %1;" + "1: NOP;" + /* We take advantage of the fact that LC0 is 0 at + * the end of the loop. Otherwise we'd need some + * NOPs after the CLI here. + */ + "CLI %0;" + "LB0 = [SP++];" + "LT0 = [SP++];" + "LC0 = [SP++];" + "STI %0;" + : "=d" (tmp) + : "a" (loops) + ); + } else + __asm__ __volatile__ ( "LSETUP(1f, 1f) LC0 = %0;" "1: NOP;" : @@ -25,15 +47,16 @@ __asm__ __volatile__ ( #include /* needed for HZ */ /* - * close approximation borrowed from m68knommu to avoid 64-bit math + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) */ - -#define HZSCALE (268435456 / (1000000/HZ)) - static inline void udelay(unsigned long usecs) { extern unsigned long loops_per_jiffy; - __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); + __delay(usecs * loops_per_jiffy / (1000000 / HZ)); } #endif diff --git a/trunk/arch/blackfin/include/asm/gpio.h b/trunk/arch/blackfin/include/asm/gpio.h index d4a082ef75b4..9477d82fcad2 100644 --- a/trunk/arch/blackfin/include/asm/gpio.h +++ b/trunk/arch/blackfin/include/asm/gpio.h @@ -27,6 +27,60 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* +* Number BF537/6/4 BF561 BF533/2/1 +* BF527/5/2 +* +* GPIO_0 PF0 PF0 PF0 +* GPIO_1 PF1 PF1 PF1 +* GPIO_2 PF2 PF2 PF2 +* GPIO_3 PF3 PF3 PF3 +* GPIO_4 PF4 PF4 PF4 +* GPIO_5 PF5 PF5 PF5 +* GPIO_6 PF6 PF6 PF6 +* GPIO_7 PF7 PF7 PF7 +* GPIO_8 PF8 PF8 PF8 +* GPIO_9 PF9 PF9 PF9 +* GPIO_10 PF10 PF10 PF10 +* GPIO_11 PF11 PF11 PF11 +* GPIO_12 PF12 PF12 PF12 +* GPIO_13 PF13 PF13 PF13 +* GPIO_14 PF14 PF14 PF14 +* GPIO_15 PF15 PF15 PF15 +* GPIO_16 PG0 PF16 +* GPIO_17 PG1 PF17 +* GPIO_18 PG2 PF18 +* GPIO_19 PG3 PF19 +* GPIO_20 PG4 PF20 +* GPIO_21 PG5 PF21 +* GPIO_22 PG6 PF22 +* GPIO_23 PG7 PF23 +* GPIO_24 PG8 PF24 +* GPIO_25 PG9 PF25 +* GPIO_26 PG10 PF26 +* GPIO_27 PG11 PF27 +* GPIO_28 PG12 PF28 +* GPIO_29 PG13 PF29 +* GPIO_30 PG14 PF30 +* GPIO_31 PG15 PF31 +* GPIO_32 PH0 PF32 +* GPIO_33 PH1 PF33 +* GPIO_34 PH2 PF34 +* GPIO_35 PH3 PF35 +* GPIO_36 PH4 PF36 +* GPIO_37 PH5 PF37 +* GPIO_38 PH6 PF38 +* GPIO_39 PH7 PF39 +* GPIO_40 PH8 PF40 +* GPIO_41 PH9 PF41 +* GPIO_42 PH10 PF42 +* GPIO_43 PH11 PF43 +* GPIO_44 PH12 PF44 +* GPIO_45 PH13 PF45 +* GPIO_46 PH14 PF46 +* GPIO_47 PH15 PF47 +*/ + #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ @@ -241,6 +295,10 @@ int bfin_gpio_direction_output(unsigned gpio, int value); int bfin_gpio_get_value(unsigned gpio); void bfin_gpio_set_value(unsigned gpio, int value); +#ifndef BF548_FAMILY +#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value) +#endif + #ifdef CONFIG_GPIOLIB #include /* cansleep wrappers */ diff --git a/trunk/arch/blackfin/include/asm/kgdb.h b/trunk/arch/blackfin/include/asm/kgdb.h index c8b256d2ea30..26ebac6646d8 100644 --- a/trunk/arch/blackfin/include/asm/kgdb.h +++ b/trunk/arch/blackfin/include/asm/kgdb.h @@ -1,8 +1,32 @@ -/* Blackfin KGDB header +/* + * File: include/asm-blackfin/kgdb.h + * Based on: + * Author: Sonic Zhang + * + * Created: + * Description: + * + * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $ + * + * Modified: + * Copyright 2005-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright 2005-2009 Analog Devices Inc. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * Licensed under the GPL-2 or later. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef __ASM_BLACKFIN_KGDB_H__ @@ -13,18 +37,17 @@ /* gdb locks */ #define KGDB_MAX_NO_CPUS 8 -/* - * BUFMAX defines the maximum number of characters in inbound/outbound buffers. - * At least NUMREGBYTES*2 are needed for register packets. - * Longer buffer is needed to list all threads. - */ +/************************************************************************/ +/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/ +/* at least NUMREGBYTES*2 are needed for register packets */ +/* Longer buffer is needed to list all threads */ #define BUFMAX 2048 /* - * Note that this register image is different from - * the register image that Linux produces at interrupt time. - * - * Linux's register image is defined by struct pt_regs in ptrace.h. + * Note that this register image is different from + * the register image that Linux produces at interrupt time. + * + * Linux's register image is defined by struct pt_regs in ptrace.h. */ enum regnames { /* Core Registers */ @@ -81,14 +104,14 @@ enum regnames { BFIN_RETX, BFIN_RETN, BFIN_RETE, - + /* Pseudo Registers */ BFIN_PC, BFIN_CC, BFIN_EXTRA1, /* Address of .text section. */ BFIN_EXTRA2, /* Address of .data section. */ BFIN_EXTRA3, /* Address of .bss section. */ - BFIN_FDPIC_EXEC, + BFIN_FDPIC_EXEC, BFIN_FDPIC_INTERP, /* MMRs */ @@ -103,7 +126,7 @@ enum regnames { static inline void arch_kgdb_breakpoint(void) { - asm("EXCPT 2;"); + asm(" EXCPT 2;"); } #define BREAK_INSTR_SIZE 2 #define CACHE_FLUSH_IS_SAFE 1 diff --git a/trunk/arch/blackfin/include/asm/mem_init.h b/trunk/arch/blackfin/include/asm/mem_init.h index 61f7487fbf12..255a9316ad36 100644 --- a/trunk/arch/blackfin/include/asm/mem_init.h +++ b/trunk/arch/blackfin/include/asm/mem_init.h @@ -115,7 +115,7 @@ #define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) /* Enable SCLK Out */ -#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) +#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) #else #define mem_SDRRC CONFIG_MEM_SDRRC #define mem_SDGCTL CONFIG_MEM_SDGCTL diff --git a/trunk/arch/blackfin/include/asm/pda.h b/trunk/arch/blackfin/include/asm/pda.h index a67142740df0..bd8d4a7efeb2 100644 --- a/trunk/arch/blackfin/include/asm/pda.h +++ b/trunk/arch/blackfin/include/asm/pda.h @@ -59,7 +59,6 @@ struct blackfin_pda { /* Per-processor Data Area */ unsigned long icplb_fault_addr; unsigned long retx; unsigned long seqstat; - unsigned int __nmi_count; /* number of times NMI asserted on this CPU */ }; extern struct blackfin_pda cpu_pda[]; diff --git a/trunk/arch/blackfin/include/asm/reboot.h b/trunk/arch/blackfin/include/asm/reboot.h index ae1e36329bec..4856d62b7467 100644 --- a/trunk/arch/blackfin/include/asm/reboot.h +++ b/trunk/arch/blackfin/include/asm/reboot.h @@ -15,6 +15,6 @@ extern void native_machine_halt(void); extern void native_machine_power_off(void); /* common reboot workarounds */ -extern void bfin_reset_boot_spi_cs(unsigned short pin); +extern void bfin_gpio_reset_spi0_ssel1(void); #endif diff --git a/trunk/arch/blackfin/kernel/Makefile b/trunk/arch/blackfin/kernel/Makefile index 4a92a86824b7..38a233374f07 100644 --- a/trunk/arch/blackfin/kernel/Makefile +++ b/trunk/arch/blackfin/kernel/Makefile @@ -15,8 +15,6 @@ else obj-y += time.o endif -CFLAGS_kgdb_test.o := -mlong-calls -O0 - obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o diff --git a/trunk/arch/blackfin/kernel/bfin_dma_5xx.c b/trunk/arch/blackfin/kernel/bfin_dma_5xx.c index 8531693fb48d..07e02c0d1c07 100644 --- a/trunk/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/trunk/arch/blackfin/kernel/bfin_dma_5xx.c @@ -249,13 +249,6 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u spin_lock_irqsave(&mdma_lock, flags); - /* Force a sync in case a previous config reset on this channel - * occurred. This is needed so subsequent writes to DMA registers - * are not spuriously lost/corrupted. Do it under irq lock and - * without the anomaly version (because we are atomic already). - */ - __builtin_bfin_ssync(); - if (bfin_read_MDMA_S0_CONFIG()) while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) continue; diff --git a/trunk/arch/blackfin/kernel/bfin_gpio.c b/trunk/arch/blackfin/kernel/bfin_gpio.c index 51dac55c524a..4c14331978f6 100644 --- a/trunk/arch/blackfin/kernel/bfin_gpio.c +++ b/trunk/arch/blackfin/kernel/bfin_gpio.c @@ -27,6 +27,59 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* +* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2 +* +* GPIO_0 PF0 PF0 PF0 PA0...PJ13 +* GPIO_1 PF1 PF1 PF1 +* GPIO_2 PF2 PF2 PF2 +* GPIO_3 PF3 PF3 PF3 +* GPIO_4 PF4 PF4 PF4 +* GPIO_5 PF5 PF5 PF5 +* GPIO_6 PF6 PF6 PF6 +* GPIO_7 PF7 PF7 PF7 +* GPIO_8 PF8 PF8 PF8 +* GPIO_9 PF9 PF9 PF9 +* GPIO_10 PF10 PF10 PF10 +* GPIO_11 PF11 PF11 PF11 +* GPIO_12 PF12 PF12 PF12 +* GPIO_13 PF13 PF13 PF13 +* GPIO_14 PF14 PF14 PF14 +* GPIO_15 PF15 PF15 PF15 +* GPIO_16 PG0 PF16 +* GPIO_17 PG1 PF17 +* GPIO_18 PG2 PF18 +* GPIO_19 PG3 PF19 +* GPIO_20 PG4 PF20 +* GPIO_21 PG5 PF21 +* GPIO_22 PG6 PF22 +* GPIO_23 PG7 PF23 +* GPIO_24 PG8 PF24 +* GPIO_25 PG9 PF25 +* GPIO_26 PG10 PF26 +* GPIO_27 PG11 PF27 +* GPIO_28 PG12 PF28 +* GPIO_29 PG13 PF29 +* GPIO_30 PG14 PF30 +* GPIO_31 PG15 PF31 +* GPIO_32 PH0 PF32 +* GPIO_33 PH1 PF33 +* GPIO_34 PH2 PF34 +* GPIO_35 PH3 PF35 +* GPIO_36 PH4 PF36 +* GPIO_37 PH5 PF37 +* GPIO_38 PH6 PF38 +* GPIO_39 PH7 PF39 +* GPIO_40 PH8 PF40 +* GPIO_41 PH9 PF41 +* GPIO_42 PH10 PF42 +* GPIO_43 PH11 PF43 +* GPIO_44 PH12 PF44 +* GPIO_45 PH13 PF45 +* GPIO_46 PH14 PF46 +* GPIO_47 PH15 PF47 +*/ + #include #include #include @@ -66,61 +119,62 @@ enum { #define AWA_DUMMY_READ(...) do { } while (0) #endif -static struct gpio_port_t * const gpio_array[] = { #if defined(BF533_FAMILY) || defined(BF538_FAMILY) +static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) FIO_FLAG_D, -#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) +}; +#endif + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) +static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) PORTFIO, (struct gpio_port_t *) PORTGIO, (struct gpio_port_t *) PORTHIO, -#elif defined(BF561_FAMILY) - (struct gpio_port_t *) FIO0_FLAG_D, - (struct gpio_port_t *) FIO1_FLAG_D, - (struct gpio_port_t *) FIO2_FLAG_D, -#elif defined(BF548_FAMILY) - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -#else -# error no gpio arrays defined -#endif }; -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) -static unsigned short * const port_fer[] = { +static unsigned short *port_fer[] = { (unsigned short *) PORTF_FER, (unsigned short *) PORTG_FER, (unsigned short *) PORTH_FER, }; +#endif -# if !defined(BF537_FAMILY) -static unsigned short * const port_mux[] = { +#if defined(BF527_FAMILY) || defined(BF518_FAMILY) +static unsigned short *port_mux[] = { (unsigned short *) PORTF_MUX, (unsigned short *) PORTG_MUX, (unsigned short *) PORTH_MUX, }; static const -u8 pmux_offset[][16] = { -# if defined(BF527_FAMILY) - { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ - { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ - { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ -# elif defined(BF518_FAMILY) - { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ - { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ - { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ -# endif +u8 pmux_offset[][16] = + {{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ + { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ + }; +#endif + +#ifdef BF561_FAMILY +static struct gpio_port_t *gpio_bankb[] = { + (struct gpio_port_t *) FIO0_FLAG_D, + (struct gpio_port_t *) FIO1_FLAG_D, + (struct gpio_port_t *) FIO2_FLAG_D, }; -# endif +#endif +#ifdef BF548_FAMILY +static struct gpio_port_t *gpio_array[] = { + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +}; #endif static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; @@ -134,9 +188,35 @@ static struct str_ident { } str_ident[MAX_RESOURCES]; #if defined(CONFIG_PM) +#if defined(CONFIG_BF54x) +static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; +#else +static unsigned short wakeup_map[GPIO_BANK_NUM]; +static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; + +#ifdef BF533_FAMILY +static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB}; +#endif + +#ifdef BF537_FAMILY +static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; +#endif + +#ifdef BF538_FAMILY +static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB}; #endif +#if defined(BF527_FAMILY) || defined(BF518_FAMILY) +static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; +#endif + +#ifdef BF561_FAMILY +static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; +#endif +#endif +#endif /* CONFIG_PM */ + inline int check_gpio(unsigned gpio) { #if defined(BF548_FAMILY) @@ -250,10 +330,9 @@ static struct { {.res = P_SPI0_SSEL3, .offset = 0}, }; -static void portmux_setup(unsigned short per) +static void portmux_setup(unsigned short per, unsigned short function) { u16 y, offset, muxreg; - u16 function = P_FUNCT2MUX(per); for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { if (port_mux_lut[y].res == per) { @@ -274,33 +353,30 @@ static void portmux_setup(unsigned short per) } } #elif defined(BF548_FAMILY) -inline void portmux_setup(unsigned short per) +inline void portmux_setup(unsigned short portno, unsigned short function) { u32 pmux; - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - pmux = gpio_array[gpio_bank(ident)]->port_mux; + pmux = gpio_array[gpio_bank(portno)]->port_mux; - pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); + pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); - gpio_array[gpio_bank(ident)]->port_mux = pmux; + gpio_array[gpio_bank(portno)]->port_mux = pmux; } -inline u16 get_portmux(unsigned short per) +inline u16 get_portmux(unsigned short portno) { u32 pmux; - u16 ident = P_IDENT(per); - pmux = gpio_array[gpio_bank(ident)]->port_mux; + pmux = gpio_array[gpio_bank(portno)]->port_mux; - return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); + return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); } #elif defined(BF527_FAMILY) || defined(BF518_FAMILY) -inline void portmux_setup(unsigned short per) +inline void portmux_setup(unsigned short portno, unsigned short function) { - u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per); + u16 pmux, ident = P_IDENT(portno); u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; pmux = *port_mux[gpio_bank(ident)]; @@ -348,71 +424,90 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ unsigned long flags; \ local_irq_save_hw(flags); \ if (arg) \ - gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ + gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ - gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ AWA_DUMMY_READ(name); \ local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); -SET_GPIO(dir) /* set_gpio_dir() */ -SET_GPIO(inen) /* set_gpio_inen() */ -SET_GPIO(polar) /* set_gpio_polar() */ -SET_GPIO(edge) /* set_gpio_edge() */ -SET_GPIO(both) /* set_gpio_both() */ +SET_GPIO(dir) +SET_GPIO(inen) +SET_GPIO(polar) +SET_GPIO(edge) +SET_GPIO(both) +#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_SC(name) \ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ + local_irq_save_hw(flags); \ + if (arg) \ + gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + else \ + gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ +} \ +EXPORT_SYMBOL(set_gpio_ ## name); +#else +#define SET_GPIO_SC(name) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ +{ \ if (arg) \ - gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ - gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ - } \ + gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); +#endif SET_GPIO_SC(maska) SET_GPIO_SC(maskb) SET_GPIO_SC(data) +#if ANOMALY_05000311 || ANOMALY_05000323 void set_gpio_toggle(unsigned gpio) { unsigned long flags; - if (ANOMALY_05000311 || ANOMALY_05000323) - local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); - if (ANOMALY_05000311 || ANOMALY_05000323) { - AWA_DUMMY_READ(toggle); - local_irq_restore_hw(flags); - } + local_irq_save_hw(flags); + gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + AWA_DUMMY_READ(toggle); + local_irq_restore_hw(flags); +} +#else +void set_gpio_toggle(unsigned gpio) +{ + gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); } +#endif EXPORT_SYMBOL(set_gpio_toggle); /*Set current PORT date (16-bit word)*/ +#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ - gpio_array[gpio_bank(gpio)]->name = arg; \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ - } \ + local_irq_save_hw(flags); \ + gpio_bankb[gpio_bank(gpio)]->name = arg; \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); +#else +#define SET_GPIO_P(name) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ +{ \ + gpio_bankb[gpio_bank(gpio)]->name = arg; \ +} \ +EXPORT_SYMBOL(set_gpiop_ ## name); +#endif SET_GPIO_P(data) SET_GPIO_P(dir) @@ -424,21 +519,27 @@ SET_GPIO_P(maska) SET_GPIO_P(maskb) /* Get a specific bit */ +#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO(name) \ unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ - ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ - } \ + local_irq_save_hw(flags); \ + ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ return ret; \ } \ EXPORT_SYMBOL(get_gpio_ ## name); +#else +#define GET_GPIO(name) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ +{ \ + return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ +} \ +EXPORT_SYMBOL(get_gpio_ ## name); +#endif GET_GPIO(data) GET_GPIO(dir) @@ -451,21 +552,27 @@ GET_GPIO(maskb) /*Get current PORT date (16-bit word)*/ +#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO_P(name) \ unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ - ret = (gpio_array[gpio_bank(gpio)]->name); \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ - } \ + local_irq_save_hw(flags); \ + ret = (gpio_bankb[gpio_bank(gpio)]->name); \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ return ret; \ } \ EXPORT_SYMBOL(get_gpiop_ ## name); +#else +#define GET_GPIO_P(name) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ +{ \ + return (gpio_bankb[gpio_bank(gpio)]->name);\ +} \ +EXPORT_SYMBOL(get_gpiop_ ## name); +#endif GET_GPIO_P(data) GET_GPIO_P(dir) @@ -478,26 +585,6 @@ GET_GPIO_P(maskb) #ifdef CONFIG_PM - -static unsigned short wakeup_map[GPIO_BANK_NUM]; -static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; - -static const unsigned int sic_iwr_irqs[] = { -#if defined(BF533_FAMILY) - IRQ_PROG_INTB -#elif defined(BF537_FAMILY) - IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX -#elif defined(BF538_FAMILY) - IRQ_PORTF_INTB -#elif defined(BF527_FAMILY) || defined(BF518_FAMILY) - IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB -#elif defined(BF561_FAMILY) - IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB -#else -# error no SIC_IWR defined -#endif -}; - /*********************************************************** * * FUNCTIONS: Blackfin PM Setup API @@ -582,18 +669,18 @@ u32 bfin_pm_standby_setup(void) mask = wakeup_map[gpio_bank(i)]; bank = gpio_bank(i); - gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb; - gpio_array[bank]->maskb = 0; + gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb; + gpio_bankb[bank]->maskb = 0; if (mask) { #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; #endif - gpio_bank_saved[bank].inen = gpio_array[bank]->inen; - gpio_bank_saved[bank].polar = gpio_array[bank]->polar; - gpio_bank_saved[bank].dir = gpio_array[bank]->dir; - gpio_bank_saved[bank].edge = gpio_array[bank]->edge; - gpio_bank_saved[bank].both = gpio_array[bank]->both; + gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; + gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; + gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; + gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; + gpio_bank_saved[bank].both = gpio_bankb[bank]->both; gpio_bank_saved[bank].reserved = reserved_gpio_map[bank]; @@ -613,7 +700,7 @@ u32 bfin_pm_standby_setup(void) } bfin_internal_set_wake(sic_iwr_irqs[bank], 1); - gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)]; + gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)]; } } @@ -634,18 +721,18 @@ void bfin_pm_standby_restore(void) #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->dir = gpio_bank_saved[bank].dir; - gpio_array[bank]->polar = gpio_bank_saved[bank].polar; - gpio_array[bank]->edge = gpio_bank_saved[bank].edge; - gpio_array[bank]->both = gpio_bank_saved[bank].both; + gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; + gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; + gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; + gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; + gpio_bankb[bank]->both = gpio_bank_saved[bank].both; reserved_gpio_map[bank] = gpio_bank_saved[bank].reserved; bfin_internal_set_wake(sic_iwr_irqs[bank], 0); } - gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb; + gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; } AWA_DUMMY_READ(maskb); } @@ -658,21 +745,21 @@ void bfin_gpio_pm_hibernate_suspend(void) bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].fer = *port_fer[bank]; + gpio_bank_saved[bank].fer = *port_fer[bank]; #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].mux = *port_mux[bank]; + gpio_bank_saved[bank].mux = *port_mux[bank]; #else - if (bank == 0) - gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); + if (bank == 0) + gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); #endif #endif - gpio_bank_saved[bank].data = gpio_array[bank]->data; - gpio_bank_saved[bank].inen = gpio_array[bank]->inen; - gpio_bank_saved[bank].polar = gpio_array[bank]->polar; - gpio_bank_saved[bank].dir = gpio_array[bank]->dir; - gpio_bank_saved[bank].edge = gpio_array[bank]->edge; - gpio_bank_saved[bank].both = gpio_array[bank]->both; - gpio_bank_saved[bank].maska = gpio_array[bank]->maska; + gpio_bank_saved[bank].data = gpio_bankb[bank]->data; + gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; + gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; + gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; + gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; + gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska; } AWA_DUMMY_READ(maska); @@ -683,27 +770,27 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); + bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - *port_mux[bank] = gpio_bank_saved[bank].mux; + *port_mux[bank] = gpio_bank_saved[bank].mux; #else - if (bank == 0) - bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); + if (bank == 0) + bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); #endif - *port_fer[bank] = gpio_bank_saved[bank].fer; + *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->dir = gpio_bank_saved[bank].dir; - gpio_array[bank]->polar = gpio_bank_saved[bank].polar; - gpio_array[bank]->edge = gpio_bank_saved[bank].edge; - gpio_array[bank]->both = gpio_bank_saved[bank].both; + gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; + gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; + gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; + gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; + gpio_bankb[bank]->both = gpio_bank_saved[bank].both; - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; - gpio_array[bank]->maska = gpio_bank_saved[bank].maska; + gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska; } AWA_DUMMY_READ(maska); } @@ -730,12 +817,12 @@ void bfin_gpio_pm_hibernate_suspend(void) for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); - gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; - gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; - gpio_bank_saved[bank].data = gpio_array[bank]->data; - gpio_bank_saved[bank].data = gpio_array[bank]->data; - gpio_bank_saved[bank].inen = gpio_array[bank]->inen; - gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; + gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; + gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; + gpio_bank_saved[bank].data = gpio_array[bank]->port_data; + gpio_bank_saved[bank].data = gpio_array[bank]->port_data; + gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen; + gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set; } } @@ -744,21 +831,21 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; - gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; - gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + bank = gpio_bank(i); + + gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; + gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; + gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir; + gpio_array[bank]->port_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; } } #endif unsigned short get_gpio_dir(unsigned gpio) { - return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); + return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); } EXPORT_SYMBOL(get_gpio_dir); @@ -818,7 +905,9 @@ int peripheral_request(unsigned short per, const char *label) */ #ifdef BF548_FAMILY - if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { + u16 funct = get_portmux(ident); + + if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { #else if (!(per & P_MAYSHARE)) { #endif @@ -842,7 +931,11 @@ int peripheral_request(unsigned short per, const char *label) anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); - portmux_setup(per); +#ifdef BF548_FAMILY + portmux_setup(ident, P_FUNCT2MUX(per)); +#else + portmux_setup(per, P_FUNCT2MUX(per)); +#endif port_setup(ident, PERIPHERAL_USAGE); local_irq_restore_hw(flags); @@ -884,6 +977,9 @@ void peripheral_free(unsigned short per) if (!(per & P_DEFINED)) return; + if (check_gpio(ident) < 0) + return; + local_irq_save_hw(flags); if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { @@ -960,15 +1056,9 @@ int bfin_gpio_request(unsigned gpio, const char *label) local_irq_restore_hw(flags); return -EBUSY; } - if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); - } -#ifndef BF548_FAMILY - else { /* Reset POLAR setting when acquiring a gpio for the first time */ - set_gpio_polar(gpio, 0); - } -#endif reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); set_label(gpio, label); @@ -988,8 +1078,6 @@ void bfin_gpio_free(unsigned gpio) if (check_gpio(gpio) < 0) return; - might_sleep(); - local_irq_save_hw(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { @@ -1070,16 +1158,8 @@ void bfin_gpio_irq_free(unsigned gpio) local_irq_restore_hw(flags); } -static inline void __bfin_gpio_direction_input(unsigned gpio) -{ -#ifdef BF548_FAMILY - gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); -#else - gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); -#endif - gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); -} +#ifdef BF548_FAMILY int bfin_gpio_direction_input(unsigned gpio) { unsigned long flags; @@ -1090,85 +1170,125 @@ int bfin_gpio_direction_input(unsigned gpio) } local_irq_save_hw(flags); - __bfin_gpio_direction_input(gpio); - AWA_DUMMY_READ(inen); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); local_irq_restore_hw(flags); return 0; } EXPORT_SYMBOL(bfin_gpio_direction_input); -void bfin_gpio_irq_prepare(unsigned gpio) +int bfin_gpio_direction_output(unsigned gpio, int value) { -#ifdef BF548_FAMILY unsigned long flags; -#endif - port_setup(gpio, GPIO_USAGE); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } -#ifdef BF548_FAMILY local_irq_save_hw(flags); - __bfin_gpio_direction_input(gpio); + gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); + gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); local_irq_restore_hw(flags); -#endif + + return 0; } +EXPORT_SYMBOL(bfin_gpio_direction_output); void bfin_gpio_set_value(unsigned gpio, int arg) { if (arg) - gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); else - gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); } EXPORT_SYMBOL(bfin_gpio_set_value); -int bfin_gpio_direction_output(unsigned gpio, int value) +int bfin_gpio_get_value(unsigned gpio) +{ + return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); +} +EXPORT_SYMBOL(bfin_gpio_get_value); + +void bfin_gpio_irq_prepare(unsigned gpio) { unsigned long flags; - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } + port_setup(gpio, GPIO_USAGE); local_irq_save_hw(flags); - - gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); - gpio_set_value(gpio, value); -#ifdef BF548_FAMILY - gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); -#else - gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); -#endif - - AWA_DUMMY_READ(dir); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); local_irq_restore_hw(flags); - - return 0; } -EXPORT_SYMBOL(bfin_gpio_direction_output); + +#else int bfin_gpio_get_value(unsigned gpio) { -#ifdef BF548_FAMILY - return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); -#else unsigned long flags; + int ret; if (unlikely(get_gpio_edge(gpio))) { - int ret; local_irq_save_hw(flags); set_gpio_edge(gpio, 0); ret = get_gpio_data(gpio); set_gpio_edge(gpio, 1); local_irq_restore_hw(flags); + return ret; } else return get_gpio_data(gpio); -#endif } EXPORT_SYMBOL(bfin_gpio_get_value); + +int bfin_gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save_hw(flags); + gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); + gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); + AWA_DUMMY_READ(inen); + local_irq_restore_hw(flags); + + return 0; +} +EXPORT_SYMBOL(bfin_gpio_direction_input); + +int bfin_gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save_hw(flags); + gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + + if (value) + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + + gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); + AWA_DUMMY_READ(dir); + local_irq_restore_hw(flags); + + return 0; +} +EXPORT_SYMBOL(bfin_gpio_direction_output); + /* If we are booting from SPI and our board lacks a strong enough pull up, * the core can reset and execute the bootrom faster than the resistor can * pull the signal logically high. To work around this (common) error in @@ -1179,15 +1299,23 @@ EXPORT_SYMBOL(bfin_gpio_get_value); * lives here as we need to force all the GPIO states w/out going through * BUG() checks and such. */ -void bfin_reset_boot_spi_cs(unsigned short pin) +void bfin_gpio_reset_spi0_ssel1(void) { - unsigned short gpio = P_IDENT(pin); + u16 gpio = P_IDENT(P_SPI0_SSEL1); + port_setup(gpio, GPIO_USAGE); - gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); AWA_DUMMY_READ(data_set); udelay(1); } +void bfin_gpio_irq_prepare(unsigned gpio) +{ + port_setup(gpio, GPIO_USAGE); +} + +#endif /*BF548_FAMILY */ + #if defined(CONFIG_PROC_FS) static int gpio_proc_read(char *buf, char **start, off_t offset, int len, int *unused_i, void *unused_v) @@ -1241,7 +1369,11 @@ int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) { +#ifdef BF548_FAMILY return bfin_gpio_set_value(gpio, value); +#else + return set_gpio_data(gpio, value); +#endif } int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) diff --git a/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c index 3e329a6ce041..bdb958486e76 100644 --- a/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/trunk/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -63,8 +63,10 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) dcplb_tbl[cpu][i_d].addr = 0; dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; +#if 0 icplb_tbl[cpu][i_i].addr = 0; - icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB; + icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; +#endif /* Cover kernel memory with 4M pages. */ addr = 0; diff --git a/trunk/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/trunk/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index 8cbb47c7b663..376249ab2694 100644 --- a/trunk/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/trunk/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -163,14 +163,12 @@ MGR_ATTR static int icplb_miss(int cpu) nr_icplb_supv_miss[cpu]++; base = 0; - idx = 0; - do { + for (idx = 0; idx < icplb_nr_bounds; idx++) { eaddr = icplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } while (++idx < icplb_nr_bounds); - + } if (unlikely(idx == icplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; @@ -210,14 +208,12 @@ MGR_ATTR static int dcplb_miss(int cpu) nr_dcplb_supv_miss[cpu]++; base = 0; - idx = 0; - do { + for (idx = 0; idx < dcplb_nr_bounds; idx++) { eaddr = dcplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } while (++idx < dcplb_nr_bounds); - + } if (unlikely(idx == dcplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; diff --git a/trunk/arch/blackfin/kernel/irqchip.c b/trunk/arch/blackfin/kernel/irqchip.c index 75724eee6494..ab8209cbbad0 100644 --- a/trunk/arch/blackfin/kernel/irqchip.c +++ b/trunk/arch/blackfin/kernel/irqchip.c @@ -35,7 +35,6 @@ #include #include #include -#include static atomic_t irq_err_count; static spinlock_t irq_controller_lock; @@ -92,13 +91,8 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "NMI: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); - seq_printf(p, " CORE Non Maskable Interrupt\n"); + } else if (i == NR_IRQS) seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); - } return 0; } diff --git a/trunk/arch/blackfin/kernel/reboot.c b/trunk/arch/blackfin/kernel/reboot.c index 53d08dee8531..eeee8cb43360 100644 --- a/trunk/arch/blackfin/kernel/reboot.c +++ b/trunk/arch/blackfin/kernel/reboot.c @@ -20,8 +20,8 @@ * reset while the Core B bit (on dual core parts) is cleared by * the core reset. */ -__attribute__ ((__l1_text__, __noreturn__)) -static void bfin_reset(void) +__attribute__((l1_text)) +static void _bfin_reset(void) { /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as @@ -30,11 +30,7 @@ static void bfin_reset(void) */ __builtin_bfin_ssync(); - /* The bootrom checks to see how it was reset and will - * automatically perform a software reset for us when - * it starts executing after the core reset. - */ - if (ANOMALY_05000353 || ANOMALY_05000386) { + while (1) { /* Initiate System software reset. */ bfin_write_SWRST(0x7); @@ -54,11 +50,6 @@ static void bfin_reset(void) /* Clear System software reset */ bfin_write_SWRST(0); - /* The BF526 ROM will crash during reset */ -#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) - bfin_read_SWRST(); -#endif - /* Wait for the SWRST write to complete. Cannot rely on SSYNC * though as the System state is all reset now. */ @@ -69,11 +60,22 @@ static void bfin_reset(void) : "a" (15 * 1) : "LC1", "LB1", "LT1" ); - } - while (1) /* Issue core reset */ asm("raise 1"); + } +} + +static void bfin_reset(void) +{ + if (ANOMALY_05000353 || ANOMALY_05000386) + _bfin_reset(); + else + /* the bootrom checks to see how it was reset and will + * automatically perform a software reset for us when + * it starts executing boot + */ + asm("raise 1;"); } __attribute__((weak)) diff --git a/trunk/arch/blackfin/kernel/setup.c b/trunk/arch/blackfin/kernel/setup.c index e5c116230800..b2a811347b65 100644 --- a/trunk/arch/blackfin/kernel/setup.c +++ b/trunk/arch/blackfin/kernel/setup.c @@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat, #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ #define BFIN_MEMMAP_RAM 1 #define BFIN_MEMMAP_RESERVED 2 -static struct bfin_memmap { +struct bfin_memmap { int nr_map; struct bfin_memmap_entry { unsigned long long addr; /* start of memory segment */ @@ -824,15 +824,7 @@ void __init setup_arch(char **cmdline_p) flash_probe(); #endif - printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); - - /* Newer parts mirror SWRST bits in SYSCR */ -#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \ - defined(CONFIG_BF538) || defined(CONFIG_BF539) _bfin_swrst = bfin_read_SWRST(); -#else - _bfin_swrst = bfin_read_SYSCR(); -#endif #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT); @@ -861,7 +853,7 @@ void __init setup_arch(char **cmdline_p) else if (_bfin_swrst & RESET_SOFTWARE) printk(KERN_NOTICE "Reset caused by Software reset\n"); - printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n"); + printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); else if (bfin_compiled_revid() == -1) diff --git a/trunk/arch/blackfin/kernel/traps.c b/trunk/arch/blackfin/kernel/traps.c index ffe7fb53eccb..5b0667da8d05 100644 --- a/trunk/arch/blackfin/kernel/traps.c +++ b/trunk/arch/blackfin/kernel/traps.c @@ -673,14 +673,6 @@ static void decode_instruction(unsigned short *address) verbose_printk("RTI"); else if (opcode == 0x0012) verbose_printk("RTX"); - else if (opcode == 0x0013) - verbose_printk("RTN"); - else if (opcode == 0x0014) - verbose_printk("RTE"); - else if (opcode == 0x0025) - verbose_printk("EMUEXCPT"); - else if (opcode == 0x0040 && opcode <= 0x0047) - verbose_printk("STI R%i", opcode & 7); else if (opcode >= 0x0050 && opcode <= 0x0057) verbose_printk("JUMP (P%i)", opcode & 7); else if (opcode >= 0x0060 && opcode <= 0x0067) @@ -689,10 +681,6 @@ static void decode_instruction(unsigned short *address) verbose_printk("CALL (PC+P%i)", opcode & 7); else if (opcode >= 0x0080 && opcode <= 0x0087) verbose_printk("JUMP (PC+P%i)", opcode & 7); - else if (opcode >= 0x0090 && opcode <= 0x009F) - verbose_printk("RAISE 0x%x", opcode & 0xF); - else if (opcode >= 0x00A0 && opcode <= 0x00AF) - verbose_printk("EXCPT 0x%x", opcode & 0xF); else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) verbose_printk("IF !CC JUMP"); else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) @@ -832,8 +820,11 @@ void show_stack(struct task_struct *task, unsigned long *stack) decode_address(buf, (unsigned int)stack); printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); + addr = (unsigned int *)((unsigned int)stack & ~0x3F); + /* First thing is to look for a frame pointer */ - for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) { + for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; + addr < endstack; addr++, i++) { if (*addr & 0x1) continue; ins_addr = (unsigned short *)*addr; @@ -843,8 +834,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) if (fp) { /* Let's check to see if it is a frame pointer */ - while (fp >= (addr - 1) && fp < endstack - && fp && ((unsigned int) fp & 0x3) == 0) + while (fp >= (addr - 1) && fp < endstack && fp) fp = (unsigned int *)*fp; if (fp == 0 || fp == endstack) { fp = addr - 1; @@ -1062,9 +1052,8 @@ void show_regs(struct pt_regs *fp) char buf [150]; struct irqaction *action; unsigned int i; - unsigned long flags = 0; + unsigned long flags; unsigned int cpu = smp_processor_id(); - unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", @@ -1084,22 +1073,17 @@ void show_regs(struct pt_regs *fp) } verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", fp->seqstat & SEQSTAT_EXCAUSE); - for (i = 2; i <= 15 ; i++) { + for (i = 6; i <= 15 ; i++) { if (fp->ipend & (1 << i)) { - if (i != 4) { - decode_address(buf, bfin_read32(EVT0 + 4*i)); - verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); - } else - verbose_printk(KERN_NOTICE " interrupts disabled\n"); + decode_address(buf, bfin_read32(EVT0 + 4*i)); + verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); } } /* if no interrupts are going off, don't print this out */ if (fp->ipend & ~0x3F) { for (i = 0; i < (NR_IRQS - 1); i++) { - if (!in_atomic) - spin_lock_irqsave(&irq_desc[i].lock, flags); - + spin_lock_irqsave(&irq_desc[i].lock, flags); action = irq_desc[i].action; if (!action) goto unlock; @@ -1112,8 +1096,7 @@ void show_regs(struct pt_regs *fp) } verbose_printk("\n"); unlock: - if (!in_atomic) - spin_unlock_irqrestore(&irq_desc[i].lock, flags); + spin_unlock_irqrestore(&irq_desc[i].lock, flags); } } diff --git a/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c b/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c index 0e175342112e..15f1351c8645 100644 --- a/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/trunk/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -46,7 +46,6 @@ #include #include #include -#include /* * Name the Board for the /proc/cpuinfo @@ -105,31 +104,8 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, -}; -#endif - -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) -static struct dsa_platform_data ksz8893m_switch_data = { - .mii_bus = &bfin_mii_bus.dev, - .netdev = &bfin_mac_device.dev, - .port_names[0] = NULL, - .port_names[1] = "eth%d", - .port_names[2] = "eth%d", - .port_names[3] = "cpu", -}; - -static struct platform_device ksz8893m_switch_device = { - .name = "dsa", - .id = 0, - .num_resources = 0, - .dev.platform_data = &ksz8893m_switch_data, }; #endif @@ -171,15 +147,6 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_NET_DSA_KSZ8893M) \ - || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) -/* SPI SWITCH CHIP */ -static struct bfin5xx_spi_chip spi_switch_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { .enable_dma = 1, @@ -259,19 +226,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_NET_DSA_KSZ8893M) \ - || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) - { - .modalias = "ksz8893m", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 1, - .platform_data = NULL, - .controller_data = &spi_switch_info, - .mode = SPI_MODE_3, - }, -#endif - #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { .modalias = "spi_mmc_dummy", @@ -519,6 +473,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -532,6 +487,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -628,14 +584,9 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) - &ksz8893m_switch_device, -#endif - #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, &bfin_spi1_device, @@ -681,8 +632,12 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init ezbrd_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); +#endif + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; @@ -694,7 +649,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); + bfin_gpio_reset_spi0_ssel1(); } void bfin_get_ether_addr(char *addr) diff --git a/trunk/arch/blackfin/mach-bf518/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf518/include/mach/portmux.h index f618b487b2b0..ac16d54734d4 100644 --- a/trunk/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -103,8 +103,6 @@ #define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) #define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) -#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 - /* SPORT Port Mux */ #define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) #define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) diff --git a/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c b/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c index 856c097b5317..a2c3578f4b6c 100644 --- a/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/trunk/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -403,13 +403,8 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -798,6 +793,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -813,6 +809,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -923,7 +920,6 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -972,23 +968,27 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init cm_init(void) +static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); +#endif + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(cm_init); +arch_initcall(stamp_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); + bfin_gpio_reset_spi0_ssel1(); } void bfin_get_ether_addr(char *addr) diff --git a/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c b/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c index 83606fcdde27..0314bd3355eb 100644 --- a/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/trunk/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -208,13 +208,8 @@ static struct platform_device rtc_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -595,6 +590,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -608,6 +604,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -723,7 +720,6 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -768,23 +764,27 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init ezbrd_init(void) +static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); +#endif + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(ezbrd_init); +arch_initcall(stamp_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); + bfin_gpio_reset_spi0_ssel1(); } void bfin_get_ether_addr(char *addr) diff --git a/trunk/arch/blackfin/mach-bf527/boards/ezkit.c b/trunk/arch/blackfin/mach-bf527/boards/ezkit.c index d0864111ef59..9454fb7b18c3 100644 --- a/trunk/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/trunk/arch/blackfin/mach-bf527/boards/ezkit.c @@ -425,13 +425,8 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -835,6 +830,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -848,6 +844,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -991,7 +988,6 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -1052,23 +1048,27 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init ezkit_init(void) +static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); +#endif + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(ezkit_init); +arch_initcall(stamp_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); + bfin_gpio_reset_spi0_ssel1(); } void bfin_get_ether_addr(char *addr) diff --git a/trunk/arch/blackfin/mach-bf527/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf527/include/mach/portmux.h index 72b1652be4da..7f6da2c386bb 100644 --- a/trunk/arch/blackfin/mach-bf527/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -73,8 +73,6 @@ #define P_HWAIT (P_DONTCARE) -#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 - #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) diff --git a/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c b/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c index 015c18f85e7f..6ee607c259ac 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/trunk/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -309,8 +309,10 @@ static struct platform_device i2c_gpio_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; +#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -388,8 +390,10 @@ static int __init blackstamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); +#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/trunk/arch/blackfin/mach-bf533/boards/stamp.c b/trunk/arch/blackfin/mach-bf533/boards/stamp.c index db96f33f72e2..07f9ad1e189c 100644 --- a/trunk/arch/blackfin/mach-bf533/boards/stamp.c +++ b/trunk/arch/blackfin/mach-bf533/boards/stamp.c @@ -441,6 +441,7 @@ static struct platform_device i2c_gpio_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -460,6 +461,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; +#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -548,8 +550,10 @@ static int __init stamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); +#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/trunk/arch/blackfin/mach-bf533/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf533/include/mach/portmux.h index 2f59ce0b0cb5..685a2651dcda 100644 --- a/trunk/arch/blackfin/mach-bf533/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -54,11 +54,14 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) -#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #define P_TMR2 (P_DONTCARE) #define P_TMR1 (P_DONTCARE) #define P_TMR0 (P_DONTCARE) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) + + + + #endif /* _MACH_PORTMUX_H_ */ diff --git a/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c b/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c index 9cd8fb2a30d3..6ac8e4d5bd38 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/trunk/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -479,13 +479,8 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -596,7 +591,6 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/trunk/arch/blackfin/mach-bf537/boards/generic_board.c b/trunk/arch/blackfin/mach-bf537/boards/generic_board.c index da710fdc4569..dd6e6bfb98ea 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/trunk/arch/blackfin/mach-bf537/boards/generic_board.c @@ -262,13 +262,8 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -667,7 +662,6 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -714,7 +708,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init generic_init(void) +static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -726,13 +720,13 @@ static int __init generic_init(void) return 0; } -arch_initcall(generic_init); +arch_initcall(stamp_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); + bfin_gpio_reset_spi0_ssel1(); } #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) diff --git a/trunk/arch/blackfin/mach-bf537/boards/minotaur.c b/trunk/arch/blackfin/mach-bf537/boards/minotaur.c index db7d3a385e4b..bb795341cb17 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/trunk/arch/blackfin/mach-bf537/boards/minotaur.c @@ -61,13 +61,8 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -329,7 +324,6 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -383,5 +377,5 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); + bfin_gpio_reset_spi0_ssel1(); } diff --git a/trunk/arch/blackfin/mach-bf537/boards/pnav10.c b/trunk/arch/blackfin/mach-bf537/boards/pnav10.c index 590eb3a139b7..89de94f4545d 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/trunk/arch/blackfin/mach-bf537/boards/pnav10.c @@ -198,13 +198,8 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -534,7 +529,6 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -564,7 +558,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init pnav_init(void) +static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -575,7 +569,7 @@ static int __init pnav_init(void) return 0; } -arch_initcall(pnav_init); +arch_initcall(stamp_init); void bfin_get_ether_addr(char *addr) { diff --git a/trunk/arch/blackfin/mach-bf537/boards/stamp.c b/trunk/arch/blackfin/mach-bf537/boards/stamp.c index cd04c5e44878..d812e2514a2f 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/stamp.c +++ b/trunk/arch/blackfin/mach-bf537/boards/stamp.c @@ -321,13 +321,8 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -1073,6 +1068,7 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -1106,6 +1102,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -1220,7 +1217,6 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -1288,8 +1284,12 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); +#endif + bfin_plat_nand_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); @@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); + bfin_gpio_reset_spi0_ssel1(); } /* diff --git a/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 3f4f203a06ec..2f4b066153c5 100644 --- a/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/trunk/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -481,13 +481,8 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - static struct platform_device bfin_mac_device = { .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, }; #endif @@ -598,7 +593,6 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, &bfin_mac_device, #endif @@ -621,7 +615,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_gpios_device, }; -static int __init tcm_bf537_init(void) +static int __init cm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); @@ -635,7 +629,7 @@ static int __init tcm_bf537_init(void) return 0; } -arch_initcall(tcm_bf537_init); +arch_initcall(cm_bf537_init); void bfin_get_ether_addr(char *addr) { diff --git a/trunk/arch/blackfin/mach-bf537/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf537/include/mach/portmux.h index 87285e75e903..78fee6e0f237 100644 --- a/trunk/arch/blackfin/mach-bf537/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -31,7 +31,6 @@ #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) #define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) -#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) #define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) diff --git a/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h index c8db264e3e4d..1e031b588b47 100644 --- a/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -102,6 +102,5 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) -#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/trunk/arch/blackfin/mach-bf548/boards/ezkit.c b/trunk/arch/blackfin/mach-bf548/boards/ezkit.c index 096e661700a7..309c16014cae 100644 --- a/trunk/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/trunk/arch/blackfin/mach-bf548/boards/ezkit.c @@ -781,6 +781,7 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { }; @@ -799,6 +800,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { #endif }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -954,11 +956,13 @@ static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ i2c_register_board_info(1, bfin_i2c_board_info1, ARRAY_SIZE(bfin_i2c_board_info1)); +#endif #endif platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h b/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h index 23d03c52f4b4..3b5430999f4f 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -175,7 +175,6 @@ #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) -#define ANOMALY_05000380 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h b/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h index cd31f72bdd82..f0e569984810 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -104,18 +104,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) -#if defined(CONFIG_BF542M) -# define CONFIG_BF542 -#elif defined(CONFIG_BF544M) -# define CONFIG_BF544 -#elif defined(CONFIG_BF547M) -# define CONFIG_BF547 -#elif defined(CONFIG_BF548M) -# define CONFIG_BF548 -#elif defined(CONFIG_BF549M) -# define CONFIG_BF549 -#endif - #if defined(CONFIG_BF542) # define CPU "BF542" # define CPUID 0x27de diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/gpio.h b/trunk/arch/blackfin/mach-bf548/include/mach/gpio.h index 3a2051709787..bba82dc75f16 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -195,17 +195,17 @@ struct gpio_port_t { unsigned short port_fer; unsigned short dummy1; - unsigned short data; + unsigned short port_data; unsigned short dummy2; - unsigned short data_set; + unsigned short port_set; unsigned short dummy3; - unsigned short data_clear; + unsigned short port_clear; unsigned short dummy4; - unsigned short dir_set; + unsigned short port_dir_set; unsigned short dummy5; - unsigned short dir_clear; + unsigned short port_dir_clear; unsigned short dummy6; - unsigned short inen; + unsigned short port_inen; unsigned short dummy7; unsigned int port_mux; }; diff --git a/trunk/arch/blackfin/mach-bf548/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf548/include/mach/portmux.h index ffb1d0a44b4d..8177a567dcdb 100644 --- a/trunk/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -125,7 +125,6 @@ #define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) #define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) -#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) #define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) #define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) diff --git a/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h b/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h index cf922295f4ce..d7c509759659 100644 --- a/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/trunk/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -1106,8 +1106,6 @@ #define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ -#define POLC 0x4000 /* PPI Clock Polarity */ -#define POLS 0x8000 /* PPI Frame Sync Polarity */ /* PPI_STATUS Masks */ #define FLD 0x00000400 /* Field Indicator */ diff --git a/trunk/arch/blackfin/mach-bf561/include/mach/portmux.h b/trunk/arch/blackfin/mach-bf561/include/mach/portmux.h index 2e5ad6347dea..a6ee8206efb6 100644 --- a/trunk/arch/blackfin/mach-bf561/include/mach/portmux.h +++ b/trunk/arch/blackfin/mach-bf561/include/mach/portmux.h @@ -85,6 +85,5 @@ #define P_SPI0_MOSI (P_DONTCARE) #define P_SPI0_MISO (P_DONTCARE) #define P_SPI0_SCK (P_DONTCARE) -#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/trunk/arch/blackfin/mach-common/clocks-init.c b/trunk/arch/blackfin/mach-common/clocks-init.c index 9dddb6f8cc85..5d182abefc7b 100644 --- a/trunk/arch/blackfin/mach-common/clocks-init.c +++ b/trunk/arch/blackfin/mach-common/clocks-init.c @@ -14,7 +14,6 @@ #include #include -#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) @@ -77,7 +76,7 @@ void init_clocks(void) bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); #ifdef EBIU_SDGCTL bfin_write_EBIU_SDRRC(mem_SDRRC); - bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL); + bfin_write_EBIU_SDGCTL(mem_SDGCTL); #else bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); do_sync(); diff --git a/trunk/arch/blackfin/mach-common/entry.S b/trunk/arch/blackfin/mach-common/entry.S index 88de053bbe8e..fae774651374 100644 --- a/trunk/arch/blackfin/mach-common/entry.S +++ b/trunk/arch/blackfin/mach-common/entry.S @@ -151,6 +151,13 @@ ENTRY(_ex_syscall) jump.s _bfin_return_from_exception; ENDPROC(_ex_syscall) +ENTRY(_ex_soft_bp) + r7 = retx; + r7 += -2; + retx = r7; + jump.s _ex_trap_c; +ENDPROC(_ex_soft_bp) + ENTRY(_ex_single_step) /* If we just returned from an interrupt, the single step event is for the RTI instruction. */ @@ -1080,7 +1087,7 @@ ENTRY(_ex_table) * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined */ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ - .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */ + .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ #ifdef CONFIG_KGDB .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection and break signal trap */ diff --git a/trunk/arch/blackfin/mach-common/head.S b/trunk/arch/blackfin/mach-common/head.S index 698d4c05947e..e1e42c029e15 100644 --- a/trunk/arch/blackfin/mach-common/head.S +++ b/trunk/arch/blackfin/mach-common/head.S @@ -17,19 +17,6 @@ __INIT -ENTRY(__init_clear_bss) - r2 = r2 - r1; - cc = r2 == 0; - if cc jump .L_bss_done; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (1f, 1f) lc0 = p2; -1: [p1++] = r0; -.L_bss_done: - rts; -ENDPROC(__init_clear_bss) - #define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) ENTRY(__start) @@ -157,35 +144,6 @@ ENTRY(__start) call _init_early_exception_vectors; #endif - r0 = 0 (x); - /* Zero out all of the fun bss regions */ -#if L1_DATA_A_LENGTH > 0 - r1.l = __sbss_l1; - r1.h = __sbss_l1; - r2.l = __ebss_l1; - r2.h = __ebss_l1; - call __init_clear_bss -#endif -#if L1_DATA_B_LENGTH > 0 - r1.l = __sbss_b_l1; - r1.h = __sbss_b_l1; - r2.l = __ebss_b_l1; - r2.h = __ebss_b_l1; - call __init_clear_bss -#endif -#if L2_LENGTH > 0 - r1.l = __sbss_l2; - r1.h = __sbss_l2; - r2.l = __ebss_l2; - r2.h = __ebss_l2; - call __init_clear_bss -#endif - r1.l = ___bss_start; - r1.h = ___bss_start; - r2.l = ___bss_stop; - r2.h = ___bss_stop; - call __init_clear_bss - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; #ifdef CONFIG_BFIN_KERNEL_CLOCK @@ -227,6 +185,19 @@ ENDPROC(__start) # define WDOG_CTL WDOGA_CTL #endif +ENTRY(__init_clear_bss) + r2 = r2 - r1; + cc = r2 == 0; + if cc jump .L_bss_done; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (1f, 1f) lc0 = p2; +1: [p1++] = r0; +.L_bss_done: + rts; +ENDPROC(__init_clear_bss) + ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; @@ -238,6 +209,35 @@ ENTRY(_real_start) w[p0] = r0; ssync; + r0 = 0 (x); + /* Zero out all of the fun bss regions */ +#if L1_DATA_A_LENGTH > 0 + r1.l = __sbss_l1; + r1.h = __sbss_l1; + r2.l = __ebss_l1; + r2.h = __ebss_l1; + call __init_clear_bss +#endif +#if L1_DATA_B_LENGTH > 0 + r1.l = __sbss_b_l1; + r1.h = __sbss_b_l1; + r2.l = __ebss_b_l1; + r2.h = __ebss_b_l1; + call __init_clear_bss +#endif +#if L2_LENGTH > 0 + r1.l = __sbss_l2; + r1.h = __sbss_l2; + r2.l = __ebss_l2; + r2.h = __ebss_l2; + call __init_clear_bss +#endif + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + call __init_clear_bss + /* Pass the u-boot arguments to the global value command line */ R0 = R7; call _cmdline_init; diff --git a/trunk/arch/blackfin/mach-common/interrupt.S b/trunk/arch/blackfin/mach-common/interrupt.S index 43c4eb9acb65..473df0f7fa78 100644 --- a/trunk/arch/blackfin/mach-common/interrupt.S +++ b/trunk/arch/blackfin/mach-common/interrupt.S @@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: - * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi + * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi */ ENTRY(_evt_nmi) .weak _evt_nmi diff --git a/trunk/arch/blackfin/mach-common/ints-priority.c b/trunk/arch/blackfin/mach-common/ints-priority.c index 202494568c6c..1bba6030dce9 100644 --- a/trunk/arch/blackfin/mach-common/ints-priority.c +++ b/trunk/arch/blackfin/mach-common/ints-priority.c @@ -1101,9 +1101,10 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#ifdef SIC_IWR0 +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ + || defined(BF538_FAMILY) || defined(CONFIG_BF51x) bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -# ifdef SIC_IWR1 +#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) /* BF52x/BF51x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -1113,8 +1114,10 @@ int __init init_arch_irq(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -# endif -# ifdef SIC_IWR2 +#else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +#endif +# ifdef CONFIG_BF54x bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else diff --git a/trunk/arch/blackfin/mach-common/pm.c b/trunk/arch/blackfin/mach-common/pm.c index f48a6aebb49b..d3d70fd67c16 100644 --- a/trunk/arch/blackfin/mach-common/pm.c +++ b/trunk/arch/blackfin/mach-common/pm.c @@ -82,9 +82,10 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); -#ifdef SIC_IWR0 +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \ + defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x) bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -# ifdef SIC_IWR1 +#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) /* BF52x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -94,8 +95,10 @@ void bfin_pm_suspend_standby_enter(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -# endif -# ifdef SIC_IWR2 +#else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +#endif +# ifdef CONFIG_BF54x bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else diff --git a/trunk/arch/frv/mm/dma-alloc.c b/trunk/arch/frv/mm/dma-alloc.c index 44840e73e907..dc6522c464d4 100644 --- a/trunk/arch/frv/mm/dma-alloc.c +++ b/trunk/arch/frv/mm/dma-alloc.c @@ -36,10 +36,10 @@ #include #include #include -#include #include #include +#include #include #include #include diff --git a/trunk/arch/ia64/include/asm/kvm.h b/trunk/arch/ia64/include/asm/kvm.h index bfa86b6af7cd..68aa6da807c1 100644 --- a/trunk/arch/ia64/include/asm/kvm.h +++ b/trunk/arch/ia64/include/asm/kvm.h @@ -25,10 +25,6 @@ #include -/* Select x86 specific features in */ -#define __KVM_HAVE_IOAPIC -#define __KVM_HAVE_DEVICE_ASSIGNMENT - /* Architectural interrupt line count. */ #define KVM_NR_INTERRUPTS 256 diff --git a/trunk/arch/ia64/kvm/kvm-ia64.c b/trunk/arch/ia64/kvm/kvm-ia64.c index 28f982045f29..4e586f6110aa 100644 --- a/trunk/arch/ia64/kvm/kvm-ia64.c +++ b/trunk/arch/ia64/kvm/kvm-ia64.c @@ -1337,10 +1337,6 @@ static void kvm_release_vm_pages(struct kvm *kvm) } } -void kvm_arch_sync_events(struct kvm *kvm) -{ -} - void kvm_arch_destroy_vm(struct kvm *kvm) { kvm_iommu_unmap_guest(kvm); diff --git a/trunk/arch/ia64/kvm/process.c b/trunk/arch/ia64/kvm/process.c index 230eae482f32..552d07724207 100644 --- a/trunk/arch/ia64/kvm/process.c +++ b/trunk/arch/ia64/kvm/process.c @@ -455,18 +455,13 @@ fpswa_ret_t vmm_fp_emulate(int fp_fault, void *bundle, unsigned long *ipsr, if (!vmm_fpswa_interface) return (fpswa_ret_t) {-1, 0, 0, 0}; - memset(&fp_state, 0, sizeof(fp_state_t)); - /* - * compute fp_state. only FP registers f6 - f11 are used by the - * vmm, so set those bits in the mask and set the low volatile - * pointer to point to these registers. + * Just let fpswa driver to use hardware fp registers. + * No fp register is valid in memory. */ - fp_state.bitmask_low64 = 0xfc0; /* bit6..bit11 */ - - fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) ®s->f6; + memset(&fp_state, 0, sizeof(fp_state_t)); - /* + /* * unsigned long (*EFI_FPSWA) ( * unsigned long trap_type, * void *Bundle, @@ -550,6 +545,10 @@ void reflect_interruption(u64 ifa, u64 isr, u64 iim, status = vmm_handle_fpu_swa(0, regs, isr); if (!status) return ; + else if (-EAGAIN == status) { + vcpu_decrement_iip(vcpu); + return ; + } break; } diff --git a/trunk/arch/ia64/sn/kernel/io_acpi_init.c b/trunk/arch/ia64/sn/kernel/io_acpi_init.c index d0223abbbbd4..c5a214026a77 100644 --- a/trunk/arch/ia64/sn/kernel/io_acpi_init.c +++ b/trunk/arch/ia64/sn/kernel/io_acpi_init.c @@ -443,7 +443,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev) size = pci_resource_len(dev, PCI_ROM_RESOURCE); addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE], size); - image_size = pci_get_rom_size(dev, addr, size); + image_size = pci_get_rom_size(addr, size); dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr; dev->resource[PCI_ROM_RESOURCE].end = (unsigned long) addr + image_size - 1; diff --git a/trunk/arch/ia64/sn/kernel/io_init.c b/trunk/arch/ia64/sn/kernel/io_init.c index e2eb2da60f96..4e1801bad83a 100644 --- a/trunk/arch/ia64/sn/kernel/io_init.c +++ b/trunk/arch/ia64/sn/kernel/io_init.c @@ -269,7 +269,7 @@ sn_io_slot_fixup(struct pci_dev *dev) rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE), size + 1); - image_size = pci_get_rom_size(dev, rom, size + 1); + image_size = pci_get_rom_size(rom, size + 1); dev->resource[PCI_ROM_RESOURCE].end = dev->resource[PCI_ROM_RESOURCE].start + image_size - 1; diff --git a/trunk/arch/mips/include/asm/spinlock.h b/trunk/arch/mips/include/asm/spinlock.h index 0884947ebe27..1a1f320c30d8 100644 --- a/trunk/arch/mips/include/asm/spinlock.h +++ b/trunk/arch/mips/include/asm/spinlock.h @@ -51,7 +51,6 @@ static inline int __raw_spin_is_contended(raw_spinlock_t *lock) return (((counters >> 14) - counters) & 0x1fff) > 1; } -#define __raw_spin_is_contended __raw_spin_is_contended static inline void __raw_spin_lock(raw_spinlock_t *lock) { diff --git a/trunk/arch/powerpc/Kconfig b/trunk/arch/powerpc/Kconfig index 5c10af66fb51..74cc312c347c 100644 --- a/trunk/arch/powerpc/Kconfig +++ b/trunk/arch/powerpc/Kconfig @@ -111,7 +111,6 @@ config PPC select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER - select HAVE_FUNCTION_GRAPH_TRACER select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_IDE select HAVE_IOREMAP_PROT @@ -410,18 +409,6 @@ config PPC_HAS_HASH_64K depends on PPC64 default n -config STDBINUTILS - bool "Using standard binutils settings" - depends on 44x - default y - help - Turning this option off allows you to select 256KB PAGE_SIZE on 44x. - Note, that kernel will be able to run only those applications, - which had been compiled using binutils later than 2.17.50.0.3 with - '-zmax-page-size' set to 256K (the default is 64K). Or, if using - the older binutils, you can patch them with a trivial patch, which - changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000. - choice prompt "Page size" default PPC_4K_PAGES @@ -457,19 +444,6 @@ config PPC_64K_PAGES bool "64k page size" if 44x || PPC_STD_MMU_64 select PPC_HAS_HASH_64K if PPC_STD_MMU_64 -config PPC_256K_PAGES - bool "256k page size" if 44x - depends on !STDBINUTILS && (!SHMEM || BROKEN) - help - Make the page size 256k. - - As the ELF standard only requires alignment to support page - sizes up to 64k, you will need to compile all of your user - space applications with a non-standard binutils settings - (see the STDBINUTILS description for details). - - Say N unless you know what you are doing. - endchoice config FORCE_MAX_ZONEORDER @@ -482,8 +456,6 @@ config FORCE_MAX_ZONEORDER default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES - range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES - default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES range 11 64 default "11" help @@ -622,7 +594,6 @@ config FSL_SOC config FSL_PCI bool select PPC_INDIRECT_PCI - select PCI_QUIRKS config 4xx_SOC bool @@ -759,22 +730,6 @@ config LOWMEM_SIZE hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL default "0x30000000" -config LOWMEM_CAM_NUM_BOOL - bool "Set number of CAMs to use to map low memory" - depends on ADVANCED_OPTIONS && FSL_BOOKE - help - This option allows you to set the maximum number of CAM slots that - will be used to map low memory. There are a limited number of slots - available and even more limited number that will fit in the L1 MMU. - However, using more entries will allow mapping more low memory. This - can be useful in optimizing the layout of kernel virtual memory. - - Say N here unless you know what you are doing. - -config LOWMEM_CAM_NUM - int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL - default 3 - config RELOCATABLE bool "Build a relocatable kernel (EXPERIMENTAL)" depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE @@ -839,7 +794,7 @@ config PHYSICAL_START config PHYSICAL_ALIGN hex - default "0x04000000" if FSL_BOOKE + default "0x10000000" if FSL_BOOKE help This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an @@ -860,6 +815,31 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" +config CONSISTENT_START_BOOL + bool "Set custom consistent memory pool address" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the base virtual address + of the consistent memory pool. This pool of virtual + memory is used to make consistent memory allocations. + +config CONSISTENT_START + hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL + default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx) + default "0xff100000" if NOT_COHERENT_CACHE + +config CONSISTENT_SIZE_BOOL + bool "Set custom consistent memory pool size" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the size of the + consistent memory pool. This pool of virtual memory + is used to make consistent memory allocations. + +config CONSISTENT_SIZE + hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL + default "0x00200000" if NOT_COHERENT_CACHE + config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx diff --git a/trunk/arch/powerpc/boot/Makefile b/trunk/arch/powerpc/boot/Makefile index 4458abb67c51..8244813bc5a6 100644 --- a/trunk/arch/powerpc/boot/Makefile +++ b/trunk/arch/powerpc/boot/Makefile @@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c + cuboot-acadia.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -276,9 +276,6 @@ image-$(CONFIG_STORCENTER) += cuImage.storcenter image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_PPC_C2K) += cuImage.c2k -# Board port in arch/powerpc/platform/amigaone/Kconfig -image-$(CONFIG_AMIGAONE) += cuImage.amigaone - # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. ifeq ($(CONFIG_PPC32),y) diff --git a/trunk/arch/powerpc/boot/cuboot-amigaone.c b/trunk/arch/powerpc/boot/cuboot-amigaone.c deleted file mode 100644 index d5029674030b..000000000000 --- a/trunk/arch/powerpc/boot/cuboot-amigaone.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Old U-boot compatibility for AmigaOne - * - * Author: Gerhard Pircher (gerhard_pircher@gmx.net) - * - * Based on cuboot-83xx.c - * Copyright (c) 2007 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ops.h" -#include "stdio.h" -#include "cuboot.h" - -#include "ppcboot.h" - -static bd_t bd; - -static void platform_fixups(void) -{ - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - fdt_init(_dtb_start); - serial_console_init(); - platform_ops.fixups = platform_fixups; -} diff --git a/trunk/arch/powerpc/boot/dts/amigaone.dts b/trunk/arch/powerpc/boot/dts/amigaone.dts deleted file mode 100644 index 26549fca2ed4..000000000000 --- a/trunk/arch/powerpc/boot/dts/amigaone.dts +++ /dev/null @@ -1,173 +0,0 @@ -/* - * AmigaOne Device Tree Source - * - * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; - -/ { - model = "AmigaOne"; - compatible = "eyetech,amigaone"; - coherency-off; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #cpus = <1>; - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // 33.3 MHz, from U-boot - clock-frequency = <0>; // From U-boot - bus-frequency = <0>; // From U-boot - }; - }; - - memory { - device_type = "memory"; - reg = <0 0>; // From U-boot - }; - - pci@80000000 { - device_type = "pci"; - compatible = "mai-logic,articia-s"; - bus-frequency = <33333333>; - bus-range = <0 0xff>; - ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O - 0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory - 0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA) - // Configuration address and data register. - reg = <0xfec00cf8 4 - 0xfee00cfc 4>; - 8259-interrupt-acknowledge = <0xfef00000>; - // Do not define a interrupt-parent here, if there is no - // interrupt-map property. - #address-cells = <3>; - #size-cells = <2>; - - isa@7 { - device_type = "isa"; - compatible = "pciclass,0601"; - vendor-id = <0x00001106>; - device-id = <0x00000686>; - revision-id = <0x00000010>; - class-code = <0x00060100>; - subsystem-id = <0>; - subsystem-vendor-id = <0>; - devsel-speed = <0x00000001>; - min-grant = <0>; - max-latency = <0>; - /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ - ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>; - interrupt-parent = <&i8259>; - #interrupt-cells = <2>; - #address-cells = <2>; - #size-cells = <1>; - - dma-controller@0 { - compatible = "pnpPNP,200"; - reg = <1 0x00000000 0x00000020 - 1 0x00000080 0x00000010 - 1 0x000000c0 0x00000020>; - }; - - i8259: interrupt-controller@20 { - device_type = "interrupt-controller"; - compatible = "pnpPNP,000"; - interrupt-controller; - reg = <1 0x00000020 0x00000002 - 1 0x000000a0 0x00000002 - 1 0x000004d0 0x00000002>; - reserved-interrupts = <2>; - #interrupt-cells = <2>; - }; - - timer@40 { - // Also adds pcspkr to platform devices. - compatible = "pnpPNP,100"; - reg = <1 0x00000040 0x00000020>; - }; - - 8042@60 { - device_type = "8042"; - reg = <1 0x00000060 0x00000001 - 1 0x00000064 0x00000001>; - interrupts = <1 3 12 3>; - #address-cells = <1>; - #size-cells = <0>; - - keyboard@0 { - compatible = "pnpPNP,303"; - reg = <0>; - }; - - mouse@1 { - compatible = "pnpPNP,f03"; - reg = <1>; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <1 0x00000070 0x00000002>; - interrupts = <8 3>; - }; - - serial@3f8 { - device_type = "serial"; - compatible = "pnpPNP,501","pnpPNP,500"; - reg = <1 0x000003f8 0x00000008>; - interrupts = <4 3>; - clock-frequency = <1843200>; - current-speed = <115200>; - }; - - serial@2f8 { - device_type = "serial"; - compatible = "pnpPNP,501","pnpPNP,500"; - reg = <1 0x000002f8 0x00000008>; - interrupts = <3 3>; - clock-frequency = <1843200>; - current-speed = <115200>; - }; - - parallel@378 { - device_type = "parallel"; - // No ECP support for now, otherwise add "pnpPNP,401". - compatible = "pnpPNP,400"; - reg = <1 0x00000378 0x00000003 - 1 0x00000778 0x00000003>; - }; - - fdc@3f0 { - device_type = "fdc"; - compatible = "pnpPNP,700"; - reg = <1 0x000003f0 0x00000008>; - interrupts = <6 3>; - #address-cells = <1>; - #size-cells = <0>; - - disk@0 { - reg = <0>; - }; - }; - }; - }; - - chosen { - linux,stdout-path = "/pci@80000000/isa@7/serial@3f8"; - }; -}; diff --git a/trunk/arch/powerpc/boot/dts/canyonlands.dts b/trunk/arch/powerpc/boot/dts/canyonlands.dts index 540ec3241f72..8b5ba8261a36 100644 --- a/trunk/arch/powerpc/boot/dts/canyonlands.dts +++ b/trunk/arch/powerpc/boot/dts/canyonlands.dts @@ -142,20 +142,6 @@ /*RXDE*/ 0x5 0x4>; }; - USB0: ehci@bffd0400 { - compatible = "ibm,usb-ehci-460ex", "usb-ehci"; - interrupt-parent = <&UIC2>; - interrupts = <0x1d 4>; - reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; - }; - - USB1: usb@bffd0000 { - compatible = "ohci-le"; - reg = <4 0xbffd0000 0x60>; - interrupt-parent = <&UIC2>; - interrupts = <0x1e 4>; - }; - POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; #address-cells = <1>; @@ -259,20 +245,6 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - rtc@68 { - compatible = "stm,m41t80"; - reg = <0x68>; - interrupt-parent = <&UIC2>; - interrupts = <0x19 0x8>; - }; - sttm@48 { - compatible = "ad,ad7414"; - reg = <0x48>; - interrupt-parent = <&UIC1>; - interrupts = <0x14 0x8>; - }; }; IIC1: i2c@ef600800 { diff --git a/trunk/arch/powerpc/boot/dts/gef_sbc310.dts b/trunk/arch/powerpc/boot/dts/gef_sbc310.dts deleted file mode 100644 index 09eeb438216b..000000000000 --- a/trunk/arch/powerpc/boot/dts/gef_sbc310.dts +++ /dev/null @@ -1,364 +0,0 @@ -/* - * GE Fanuc SBC310 Device Tree Source - * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Based on: SBS CM6 Device Tree Source - * Copyright 2007 SBS Technologies GmbH & Co. KG - * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) - * Copyright 2006 Freescale Semiconductor Inc. - */ - -/* - * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts - */ - -/dts-v1/; - -/ { - model = "GEF_SBC310"; - compatible = "gef,sbc310"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x40000000>; // set by uboot - }; - - localbus@fef05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xfef05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - - ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash - 1 0 0xe0000000 0x08000000 // Paged Flash 0 - 2 0 0xe8000000 0x08000000 // Paged Flash 1 - 3 0 0xfc100000 0x00020000 // NVRAM - 4 0 0xfc000000 0x00010000>; // FPGA - - /* flash@0,0 is a mirror of part of the memory in flash@1,0 - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x01000000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "firmware"; - reg = <0x00000000 0x01000000>; - read-only; - }; - }; - */ - - flash@1,0 { - compatible = "cfi-flash"; - reg = <1 0 0x8000000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "user"; - reg = <0x00000000 0x07800000>; - }; - partition@7800000 { - label = "firmware"; - reg = <0x07800000 0x00800000>; - read-only; - }; - }; - - fpga@4,0 { - compatible = "gef,fpga-regs"; - reg = <0x4 0x0 0x40>; - }; - - wdt@4,2000 { - #interrupt-cells = <2>; - device_type = "watchdog"; - compatible = "gef,fpga-wdt"; - reg = <0x4 0x2000 0x8>; - interrupts = <0x1a 0x4>; - interrupt-parent = <&gef_pic>; - }; -/* - wdt@4,2010 { - #interrupt-cells = <2>; - device_type = "watchdog"; - compatible = "gef,fpga-wdt"; - reg = <0x4 0x2010 0x8>; - interrupts = <0x1b 0x4>; - interrupt-parent = <&gef_pic>; - }; -*/ - gef_pic: pic@4,4000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "gef,fpga-pic"; - reg = <0x4 0x4000 0x20>; - interrupts = <0x8 - 0x9>; - interrupt-parent = <&mpic>; - - }; - gef_gpio: gpio@4,8000 { - #gpio-cells = <2>; - compatible = "gef,sbc310-gpio"; - reg = <0x4 0x8000 0x24>; - gpio-controller; - }; - }; - - soc@fef00000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xfef00000 0x00100000>; - reg = <0xfef00000 0x100000>; // CCSRBAR 1M - bus-frequency = <33333333>; - - i2c1: i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - - rtc@51 { - compatible = "epson,rx8581"; - reg = <0x00000051>; - }; - }; - - i2c2: i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - - hwmon@48 { - compatible = "national,lm92"; - reg = <0x48>; - }; - - hwmon@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - - eti@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&gef_pic>; - interrupts = <0x9 0x4>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&gef_pic>; - interrupts = <0x8 0x4>; - reg = <3>; - }; - }; - - enet0: ethernet@24000 { - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0>; - phy-connection-type = "gmii"; - }; - - enet1: ethernet@26000 { - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy2>; - phy-connection-type = "gmii"; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <0x1c 0x2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@fef08000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xfef08000 0x1000>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 - 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 - 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 - 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2 - 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x40000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00400000>; - }; - }; -}; diff --git a/trunk/arch/powerpc/boot/dts/gef_sbc610.dts b/trunk/arch/powerpc/boot/dts/gef_sbc610.dts index 714175ccb2a4..e78c355c7bac 100644 --- a/trunk/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/trunk/arch/powerpc/boot/dts/gef_sbc610.dts @@ -71,7 +71,7 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xfef05000 0x1000>; + reg = <0xf8005000 0x1000>; interrupts = <19 2>; interrupt-parent = <&mpic>; diff --git a/trunk/arch/powerpc/boot/dts/mpc8313erdb.dts b/trunk/arch/powerpc/boot/dts/mpc8313erdb.dts index 3ebf7ec0484c..909a89cab9ac 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -191,8 +191,7 @@ interrupts = <37 0x8 36 0x8 35 0x8>; interrupt-parent = <&ipic>; tbi-handle = < &tbi0 >; - /* Vitesse 7385 isn't on the MDIO bus */ - fixed-link = <1 1 1000 0 0>; + phy-handle = < &phy1 >; fsl,magic-packet; mdio@24520 { @@ -200,6 +199,12 @@ #size-cells = <0>; compatible = "fsl,gianfar-mdio"; reg = <0x24520 0x20>; + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; phy4: ethernet-phy@4 { interrupt-parent = <&ipic>; interrupts = <20 0x8>; @@ -214,8 +219,6 @@ }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; diff --git a/trunk/arch/powerpc/boot/dts/mpc8315erdb.dts b/trunk/arch/powerpc/boot/dts/mpc8315erdb.dts index 88d691cccb38..71784165b77e 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -22,8 +22,6 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; }; cpus { @@ -351,66 +349,4 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; - - pci1: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xa0000000 - 0x02000000 0 0xa0000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; - - pci2: pcie@e000a000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; - reg = <0xe000a000 0x00001000>; - ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000 - 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xc0000000 - 0x02000000 0 0xc0000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8377_mds.dts b/trunk/arch/powerpc/boot/dts/mpc8377_mds.dts index 3e3ec8fdef49..1d14d7052e6d 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -23,8 +23,6 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; }; cpus { @@ -313,13 +311,12 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhci@2e000 { - compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; }; sata@18000 { @@ -412,66 +409,4 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; - - pci1: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xa8000000 - 0x02000000 0 0xa8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; - - pci2: pcie@e000a000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; - reg = <0xe000a000 0x00001000>; - ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xc8000000 - 0x02000000 0 0xc8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8377_rdb.dts b/trunk/arch/powerpc/boot/dts/mpc8377_rdb.dts index fb1d884348ec..9413af3b9925 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -22,8 +22,6 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; }; cpus { @@ -109,24 +107,6 @@ reg = <0x200 0x100>; }; - gpio1: gpio-controller@c00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; - reg = <0xc00 0x100>; - interrupts = <74 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - - gpio2: gpio-controller@d00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; - reg = <0xd00 0x100>; - interrupts = <75 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -136,17 +116,6 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; - - dtt@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - - at24@50 { - compatible = "at24,24c256"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -320,15 +289,6 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhci@2e000 { - compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - sata@18000 { compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; @@ -390,66 +350,4 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; - - pci1: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xa8000000 - 0x02000000 0 0xa8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; - - pci2: pcie@e000a000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; - reg = <0xe000a000 0x00001000>; - ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xc8000000 - 0x02000000 0 0xc8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8378_mds.dts b/trunk/arch/powerpc/boot/dts/mpc8378_mds.dts index c3b212cf9025..b85fc02682d2 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -23,8 +23,6 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; }; cpus { @@ -313,13 +311,12 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; }; /* IPIC @@ -398,66 +395,4 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; - - pci1: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xa8000000 - 0x02000000 0 0xa8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; - - pci2: pcie@e000a000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; - reg = <0xe000a000 0x00001000>; - ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xc8000000 - 0x02000000 0 0xc8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8378_rdb.dts b/trunk/arch/powerpc/boot/dts/mpc8378_rdb.dts index 37c8555cc8d4..23c10ce22c2c 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -22,8 +22,6 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; }; cpus { @@ -109,24 +107,6 @@ reg = <0x200 0x100>; }; - gpio1: gpio-controller@c00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; - reg = <0xc00 0x100>; - interrupts = <74 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - - gpio2: gpio-controller@d00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; - reg = <0xd00 0x100>; - interrupts = <75 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -136,17 +116,6 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; - - dtt@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - - at24@50 { - compatible = "at24,24c256"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -318,15 +287,6 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - /* IPIC * interrupts cell = * sense values match linux IORESOURCE_IRQ_* defines: @@ -374,66 +334,4 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; - - pci1: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xa8000000 - 0x02000000 0 0xa8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; - - pci2: pcie@e000a000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; - reg = <0xe000a000 0x00001000>; - ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xc8000000 - 0x02000000 0 0xc8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8379_mds.dts b/trunk/arch/powerpc/boot/dts/mpc8379_mds.dts index 1b61cda1eb47..acf06c438dbf 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -310,13 +310,12 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhci@2e000 { - compatible = "fsl,mpc8379-esdhc"; + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; }; sata@18000 { diff --git a/trunk/arch/powerpc/boot/dts/mpc8379_rdb.dts b/trunk/arch/powerpc/boot/dts/mpc8379_rdb.dts index e2f98e6a51a2..72cdc3c4c7e3 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -107,24 +107,6 @@ reg = <0x200 0x100>; }; - gpio1: gpio-controller@c00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; - reg = <0xc00 0x100>; - interrupts = <74 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - - gpio2: gpio-controller@d00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; - reg = <0xd00 0x100>; - interrupts = <75 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -134,17 +116,6 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; - - dtt@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - - at24@50 { - compatible = "at24,24c256"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -317,15 +288,6 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhci@2e000 { - compatible = "fsl,mpc8379-esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - sata@18000 { compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; diff --git a/trunk/arch/powerpc/boot/dts/mpc8572ds.dts b/trunk/arch/powerpc/boot/dts/mpc8572ds.dts index 6c9354b2d7b7..359c3b727420 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8572ds.dts @@ -1,7 +1,7 @@ /* * MPC8572 DS Device Tree Source * - * Copyright 2007-2009 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -643,7 +643,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -654,7 +654,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; @@ -744,7 +744,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; }; }; @@ -781,7 +781,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; }; }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/trunk/arch/powerpc/boot/dts/mpc8572ds_36b.dts deleted file mode 100644 index fc7dbf49f4cc..000000000000 --- a/trunk/arch/powerpc/boot/dts/mpc8572ds_36b.dts +++ /dev/null @@ -1,787 +0,0 @@ -/* - * MPC8572 DS Device Tree Source - * - * Copyright 2007-2009 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - model = "fsl,MPC8572DS"; - compatible = "fsl,MPC8572DS"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8572@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - - PowerPC,8572@1 { - device_type = "cpu"; - reg = <0x1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - }; - - localbus@fffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; - reg = <0xf 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - - ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 - 0x1 0x0 0xf 0xe0000000 0x08000000 - 0x2 0x0 0xf 0xffa00000 0x00040000 - 0x3 0x0 0xf 0xffdf0000 0x00008000 - 0x4 0x0 0xf 0xffa40000 0x00040000 - 0x5 0x0 0xf 0xffa80000 0x00040000 - 0x6 0x0 0xf 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - nand@4,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; - }; - - soc8572@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xf 0xffe00000 0x100000>; - reg = <0xf 0xffe00000 0 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed - bus-frequency = <0>; // Filled out by uboot. - - memory-controller@2000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - memory-controller@6000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x6000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x100000>; // L2, 1M - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x25520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@27520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x27520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@24000 { - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - enet1: ethernet@25000 { - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - enet2: ethernet@26000 { - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - }; - - enet3: ethernet@27000 { - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8572-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - }; - - pci0: pcie@fffe08000 { - cell-index = <0>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xf 0xffe08000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x00000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 - - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - - >; - - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; - }; - - }; - - pci1: pcie@fffe09000 { - cell-index = <1>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - }; - }; - - pci2: pcie@fffe0a000 { - cell-index = <2>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - }; - }; -}; diff --git a/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts index 15d9e35eb58a..fd462efa9e61 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts @@ -6,7 +6,7 @@ * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0, * eth1, crypto, pci0, pci1. * - * Copyright 2007-2009 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -376,7 +376,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; @@ -387,7 +387,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; @@ -477,7 +477,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; }; }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts index eace811d27eb..e35230f2ac93 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts @@ -7,7 +7,7 @@ * * Please note to add "-b 1" for core1's dts compiling. * - * Copyright 2007-2009 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -228,7 +228,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x10000>; + 0x0 0x100000>; }; }; }; diff --git a/trunk/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/trunk/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 1bd3ebe11437..f724d72c7b92 100644 --- a/trunk/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/trunk/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -217,7 +217,6 @@ codec-handle = <&cs4270>; fsl,playback-dma = <&dma00>; fsl,capture-dma = <&dma01>; - fsl,fifo-depth = <8>; }; ssi@16100 { @@ -226,7 +225,6 @@ reg = <0x16100 0x100>; interrupt-parent = <&mpic>; interrupts = <63 2>; - fsl,fifo-depth = <8>; }; dma@21300 { diff --git a/trunk/arch/powerpc/boot/dts/redwood.dts b/trunk/arch/powerpc/boot/dts/redwood.dts deleted file mode 100644 index ad402c488741..000000000000 --- a/trunk/arch/powerpc/boot/dts/redwood.dts +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Device Tree Source for AMCC Redwood(460SX) - * - * Copyright 2008 AMCC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <2>; - #size-cells = <1>; - model = "amcc,redwood"; - compatible = "amcc,redwood"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,460SX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <32768>; - d-cache-size = <32768>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller0 { - compatible = "ibm,uic-460sx","ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-460sx","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-460sx","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC3: interrupt-controller3 { - compatible = "ibm,uic-460sx","ibm,uic"; - interrupt-controller; - cell-index = <3>; - dcr-reg = <0x0f0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - SDR0: sdr { - compatible = "ibm,sdr-460sx"; - dcr-reg = <0x00e 0x002>; - }; - - CPR0: cpr { - compatible = "ibm,cpr-460sx"; - dcr-reg = <0x00c 0x002>; - }; - - plb { - compatible = "ibm,plb-460sx", "ibm,plb4"; - #address-cells = <2>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: sdram { - compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; - dcr-reg = <0x010 0x002>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; - dcr-reg = <0x180 0x62>; - num-tx-chans = <4>; - num-rx-chans = <32>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&UIC1>; - interrupts = < /*TXEOB*/ 0x6 0x4 - /*RXEOB*/ 0x7 0x4 - /*SERR*/ 0x1 0x4 - /*TXDE*/ 0x2 0x4 - /*RXDE*/ 0x3 0x4 - /*COAL TX0*/ 0x18 0x2 - /*COAL TX1*/ 0x19 0x2 - /*COAL TX2*/ 0x1a 0x2 - /*COAL TX3*/ 0x1b 0x2 - /*COAL RX0*/ 0x1c 0x2 - /*COAL RX1*/ 0x1d 0x2 - /*COAL RX2*/ 0x1e 0x2 - /*COAL RX3*/ 0x1f 0x2>; - }; - - POB0: opb { - compatible = "ibm,opb-460sx", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-460sx", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x6 0x4>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x0000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x001e0000>; - }; - partition@1e0000 { - label = "dtb"; - reg = <0x001e0000 0x00020000>; - }; - partition@200000 { - label = "ramdisk"; - reg = <0x00200000 0x01400000>; - }; - partition@1600000 { - label = "jffs2"; - reg = <0x01600000 0x00400000>; - }; - partition@1a00000 { - label = "user"; - reg = <0x01a00000 0x02560000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; /* Filled in by U-Boot */ - interrupt-parent = <&UIC0>; - interrupts = <0x0 0x4>; - }; - - RGMII0: emac-rgmii@ef600900 { - compatible = "ibm,rgmii-460sx", "ibm,rgmii"; - reg = <0xef600900 0x00000008>; - }; - - EMAC0: ethernet@ef600a00 { - device_type = "network"; - compatible = "ibm,emac-460sx", "ibm,emac4"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600a00 0x00000070>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - }; - - }; - chosen { - linux,stdout-path = "/plb/opb/serial@ef600200"; - }; - -}; diff --git a/trunk/arch/powerpc/boot/dts/tqm8540.dts b/trunk/arch/powerpc/boot/dts/tqm8540.dts index 39e55ab82b89..a693f01c21aa 100644 --- a/trunk/arch/powerpc/boot/dts/tqm8540.dts +++ b/trunk/arch/powerpc/boot/dts/tqm8540.dts @@ -84,11 +84,6 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { - compatible = "national,lm75"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; diff --git a/trunk/arch/powerpc/boot/dts/tqm8541.dts b/trunk/arch/powerpc/boot/dts/tqm8541.dts index 58ae8bc58817..9e3f5f0dde20 100644 --- a/trunk/arch/powerpc/boot/dts/tqm8541.dts +++ b/trunk/arch/powerpc/boot/dts/tqm8541.dts @@ -83,11 +83,6 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { - compatible = "national,lm75"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; diff --git a/trunk/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/trunk/arch/powerpc/boot/dts/tqm8548-bigflash.dts index bff380a25aa6..15086eb65c50 100644 --- a/trunk/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/trunk/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -85,11 +85,6 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { - compatible = "national,lm75"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -370,14 +365,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 1>; + interrupts = <4 0>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 1>; + interrupts = <4 0>; interrupt-parent = <&mpic>; }; diff --git a/trunk/arch/powerpc/boot/dts/tqm8548.dts b/trunk/arch/powerpc/boot/dts/tqm8548.dts index 112ac90f2ea7..b7b65f5e79b6 100644 --- a/trunk/arch/powerpc/boot/dts/tqm8548.dts +++ b/trunk/arch/powerpc/boot/dts/tqm8548.dts @@ -85,11 +85,6 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { - compatible = "national,lm75"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -370,14 +365,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 1>; + interrupts = <4 0>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 1>; + interrupts = <4 0>; interrupt-parent = <&mpic>; }; diff --git a/trunk/arch/powerpc/boot/dts/tqm8555.dts b/trunk/arch/powerpc/boot/dts/tqm8555.dts index 4b7da890c03b..cf92b4e7945e 100644 --- a/trunk/arch/powerpc/boot/dts/tqm8555.dts +++ b/trunk/arch/powerpc/boot/dts/tqm8555.dts @@ -83,11 +83,6 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { - compatible = "national,lm75"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; diff --git a/trunk/arch/powerpc/boot/dts/tqm8560.dts b/trunk/arch/powerpc/boot/dts/tqm8560.dts index 3fa552f31edb..9e1ab2d2f669 100644 --- a/trunk/arch/powerpc/boot/dts/tqm8560.dts +++ b/trunk/arch/powerpc/boot/dts/tqm8560.dts @@ -85,11 +85,6 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { - compatible = "national,lm75"; - reg = <0x50>; - }; - rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -340,14 +335,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 1>; + interrupts = <4 0>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 1>; + interrupts = <4 0>; interrupt-parent = <&mpic>; }; }; diff --git a/trunk/arch/powerpc/boot/serial.c b/trunk/arch/powerpc/boot/serial.c index f2156f07571f..8b3607cb53fb 100644 --- a/trunk/arch/powerpc/boot/serial.c +++ b/trunk/arch/powerpc/boot/serial.c @@ -117,8 +117,7 @@ int serial_console_init(void) if (devp == NULL) goto err_out; - if (dt_is_compatible(devp, "ns16550") || - dt_is_compatible(devp, "pnpPNP,501")) + if (dt_is_compatible(devp, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); else if (dt_is_compatible(devp, "marvell,mv64360-mpsc")) rc = mpsc_console_init(devp, &serial_cd); diff --git a/trunk/arch/powerpc/boot/wrapper b/trunk/arch/powerpc/boot/wrapper index 6170bbf339a3..965c237c122d 100755 --- a/trunk/arch/powerpc/boot/wrapper +++ b/trunk/arch/powerpc/boot/wrapper @@ -186,9 +186,6 @@ cuboot*) *-mpc85*|*-tqm85*|*-sbc85*) platformo=$object/cuboot-85xx.o ;; - *-amigaone) - link_address='0x800000' - ;; esac ;; ps3) diff --git a/trunk/arch/powerpc/configs/44x/canyonlands_defconfig b/trunk/arch/powerpc/configs/44x/canyonlands_defconfig index f9a08ee49b96..81cdcc4b9278 100644 --- a/trunk/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/trunk/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Mon Feb 2 13:13:04 2009 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:35 2009 # # CONFIG_PPC64 is not set @@ -74,15 +74,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -156,6 +147,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -377,7 +373,6 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -389,7 +384,6 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 @@ -472,15 +466,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # Enable WiMAX (Networking options) to see the WiMAX drivers # - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -548,136 +533,13 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_IBM_IIC=y -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -CONFIG_SENSORS_AD7414=y -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set @@ -694,12 +556,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -717,7 +574,6 @@ CONFIG_SSB_POSSIBLE=y # Multimedia drivers # CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set # # Graphics support @@ -734,109 +590,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_LIBUSUAL=y - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# +# CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set diff --git a/trunk/arch/powerpc/configs/44x/redwood_defconfig b/trunk/arch/powerpc/configs/44x/redwood_defconfig deleted file mode 100644 index e665433762ba..000000000000 --- a/trunk/arch/powerpc/configs/44x/redwood_defconfig +++ /dev/null @@ -1,1176 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Wed Feb 4 14:31:09 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -CONFIG_44x=y -# CONFIG_E200 is not set -CONFIG_PPC_FPU=y -CONFIG_4xx=y -CONFIG_BOOKE=y -CONFIG_PTE_64BIT=y -CONFIG_PHYS_64BIT=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_PPC_DCR_NATIVE=y -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_PPC_DCR=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_FREEZER is not set -CONFIG_PPC4xx_PCI_EXPRESS=y - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -# CONFIG_BAMBOO is not set -# CONFIG_EBONY is not set -# CONFIG_SAM440EP is not set -# CONFIG_SEQUOIA is not set -# CONFIG_TAISHAN is not set -# CONFIG_KATMAI is not set -# CONFIG_RAINIER is not set -# CONFIG_WARP is not set -# CONFIG_ARCHES is not set -# CONFIG_CANYONLANDS is not set -# CONFIG_GLACIER is not set -CONFIG_REDWOOD=y -# CONFIG_YOSEMITE is not set -# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set -CONFIG_PPC44x_SIMPLE=y -# CONFIG_PPC4xx_GPIO is not set -CONFIG_460SX=y -# CONFIG_IPIC is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="" -CONFIG_EXTRA_TARGETS="" -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_4xx_SOC=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -# CONFIG_PCIEASPM is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=35000 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_XILINX_SYSACE is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=y -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_FUSION=y -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -CONFIG_FUSION_SAS=y -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LOGGING is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -CONFIG_I2O=y -CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y -CONFIG_I2O_EXT_ADAPTEC=y -# CONFIG_I2O_CONFIG is not set -# CONFIG_I2O_BUS is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_IBM_NEW_EMAC=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_TXB=256 -CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 -CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 -CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 -CONFIG_IBM_NEW_EMAC_DEBUG=y -CONFIG_IBM_NEW_EMAC_ZMII=y -CONFIG_IBM_NEW_EMAC_RGMII=y -CONFIG_IBM_NEW_EMAC_TAH=y -CONFIG_IBM_NEW_EMAC_EMAC4=y -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -CONFIG_E1000E=y -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_IBM_IIC=y -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -CONFIG_I2C_DEBUG_CORE=y -CONFIG_I2C_DEBUG_ALGO=y -CONFIG_I2C_DEBUG_BUS=y -CONFIG_I2C_DEBUG_CHIP=y -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_VIRQ_DEBUG is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_GF128MUL=y -# CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=y -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_SEQIV=y - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_XTS=y - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=y - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=y -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 409d017621a8..9e47ae957e2e 100644 --- a/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/trunk/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -651,7 +651,7 @@ CONFIG_CICADA_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set -CONFIG_FIXED_PHY=y +# CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y diff --git a/trunk/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/trunk/arch/powerpc/configs/86xx/gef_sbc310_defconfig deleted file mode 100644 index bd236b3d915a..000000000000 --- a/trunk/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ /dev/null @@ -1,1613 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Wed Jan 28 23:05:34 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -CONFIG_6xx=y -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_PPC_FPU=y -# CONFIG_PHYS_64BIT is not set -CONFIG_ALTIVEC=y -CONFIG_PPC_STD_MMU=y -CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_LOCKBREAK=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -CONFIG_GENERIC_TBSYNC=y -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set -CONFIG_PPC_MSI_BITMAP=y - -# -# Platform support -# -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y -# CONFIG_PPC_CHRP is not set -# CONFIG_MPC5121_ADS is not set -# CONFIG_MPC5121_GENERIC is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PQ2ADS is not set -# CONFIG_PPC_83xx is not set -CONFIG_PPC_86xx=y -# CONFIG_MPC8641_HPCN is not set -# CONFIG_SBC8641D is not set -# CONFIG_MPC8610_HPCD is not set -CONFIG_GEF_SBC310=y -# CONFIG_GEF_SBC610 is not set -CONFIG_MPC8641=y -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_TAU is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_SCHED_HRTICK=y -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_IRQ_ALL_CPUS=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -# CONFIG_PROC_DEVICETREE is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -# CONFIG_PCIEASPM is not set -CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_PCI_MSI=y -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LOWMEM_CAM_NUM=3 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -# CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_LRO=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -# CONFIG_WIRELESS is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_OF_PARTS=y -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_GPIO=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_93CX6 is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set -CONFIG_SATA_SIL24=y -# CONFIG_SATA_FSL is not set -# CONFIG_ATA_SFF is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -CONFIG_PPPOE=m -# CONFIG_PPPOL2TP is not set -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLHC=m -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_NET_FC is not set -CONFIG_NETCONSOLE=y -# CONFIG_NETCONSOLE_DYNAMIC is not set -CONFIG_NETPOLL=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y - -# -# Memory mapped GPIO expanders: -# -# CONFIG_GPIO_XILINX is not set - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set - -# -# PCI GPIO expanders: -# -# CONFIG_GPIO_BT8XX is not set - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -CONFIG_SENSORS_LM90=y -CONFIG_SENSORS_LM92=y -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_ALIM7101_WDT is not set -CONFIG_GEF_WDT=y -# CONFIG_8xxx_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TPS65010 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MON is not set -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -# CONFIG_USB_EHCI_HCD_PPC_OF is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_HCD_PPC_OF is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -# CONFIG_RTC_INTF_PROC is not set -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -CONFIG_RTC_DRV_RX8581=y - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=850 -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_IRQSTACKS is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=m -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/amigaone_defconfig b/trunk/arch/powerpc/configs/amigaone_defconfig deleted file mode 100644 index b63cc38df6b1..000000000000 --- a/trunk/arch/powerpc/configs/amigaone_defconfig +++ /dev/null @@ -1,1636 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Sun Feb 1 14:22:42 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -CONFIG_6xx=y -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_PPC_FPU=y -CONFIG_ALTIVEC=y -CONFIG_PPC_STD_MMU=y -CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_CHECK_CACHE_COHERENCY=y -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -# CONFIG_COMPAT_BRK is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_FREEZER is not set - -# -# Platform support -# -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y -# CONFIG_PPC_CHRP is not set -# CONFIG_MPC5121_ADS is not set -# CONFIG_MPC5121_GENERIC is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PQ2ADS is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_EMBEDDED6xx is not set -CONFIG_AMIGAONE=y -# CONFIG_IPIC is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_TAU is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_MIGRATION is not set -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_ADVANCED is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -# CONFIG_IP_NF_TARGET_ULOG is not set -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -# CONFIG_NF_NAT_TFTP is not set -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_H323 is not set -CONFIG_NF_NAT_SIP=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_AX88796 is not set -# CONFIG_PARPORT_1284 is not set -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_93CX6 is not set -CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_TIMINGS=y -CONFIG_IDE_ATAPI=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -# CONFIG_IDE_GD_ATAPI is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_PLATFORM is not set -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT8172 is not set -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=y -# CONFIG_BLK_DEV_SL82C105 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDEDMA=y - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_MMIO is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y -# CONFIG_TYPHOON is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SMSC9420 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -# CONFIG_NET_POCKET is not set -# CONFIG_ATL2 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_ELANTECH is not set -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_PCSPKR=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -# CONFIG_INPUT_CM109 is not set -CONFIG_INPUT_UINPUT=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_ALGOBIT=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=y -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -CONFIG_FB_MACMODES=y -CONFIG_FB_BACKLIGHT=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_OF is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -CONFIG_FB_RADEON_BACKLIGHT=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_VIA is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=y -# CONFIG_FB_3DFX_ACCEL is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_PLATFORM is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y - -# -# Display device support -# -CONFIG_DISPLAY_SUPPORT=m - -# -# Display hardware drivers -# - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -CONFIG_HID_TOPSEED=y -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_HCD_PPC_OF is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_EXT4_FS=y -# CONFIG_EXT4DEV_COMPAT is not set -CONFIG_EXT4_FS_XATTR=y -# CONFIG_EXT4_FS_POSIX_ACL is not set -# CONFIG_EXT4_FS_SECURITY is not set -CONFIG_JBD=y -CONFIG_JBD2=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -CONFIG_AFFS_FS=m -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -CONFIG_AMIGA_PARTITION=y -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -CONFIG_XMON_DISASSEMBLY=y -CONFIG_DEBUGGER=y -CONFIG_IRQSTACKS=y -# CONFIG_BDI_SWITCH is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_ALGAPI2=m -CONFIG_CRYPTO_AEAD2=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_HASH2=m -CONFIG_CRYPTO_RNG2=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_MANAGER2=m -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/trunk/arch/powerpc/configs/mpc5200_defconfig b/trunk/arch/powerpc/configs/mpc5200_defconfig index 81afc8b373d7..af0cd55605d0 100644 --- a/trunk/arch/powerpc/configs/mpc5200_defconfig +++ b/trunk/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:40:44 2009 +# Linux kernel version: 2.6.29-rc3 +# Fri Feb 6 09:48:53 2009 # # CONFIG_PPC64 is not set @@ -388,7 +388,10 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -502,7 +505,7 @@ CONFIG_MISC_DEVICES=y # # EEPROM support # -# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y @@ -678,7 +681,7 @@ CONFIG_PHYLIB=y # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set +CONFIG_LXT_PHY=y # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set @@ -815,8 +818,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -1281,7 +1282,61 @@ CONFIG_NEW_LEDS=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/trunk/arch/powerpc/include/asm/bootx.h b/trunk/arch/powerpc/include/asm/bootx.h index 60a3c9ef3017..57b82e3f89ce 100644 --- a/trunk/arch/powerpc/include/asm/bootx.h +++ b/trunk/arch/powerpc/include/asm/bootx.h @@ -9,7 +9,7 @@ #ifndef __ASM_BOOTX_H__ #define __ASM_BOOTX_H__ -#include +#include #ifdef macintosh #include diff --git a/trunk/arch/powerpc/include/asm/code-patching.h b/trunk/arch/powerpc/include/asm/code-patching.h index 37c32aba79b7..107d9b915e33 100644 --- a/trunk/arch/powerpc/include/asm/code-patching.h +++ b/trunk/arch/powerpc/include/asm/code-patching.h @@ -11,7 +11,9 @@ */ #include -#include + +#define PPC_NOP_INSTR 0x60000000 +#define PPC_LWSYNC_INSTR 0x7c2004ac /* Flags for create_branch: * "b" == create_branch(addr, target, 0); diff --git a/trunk/arch/powerpc/include/asm/cputable.h b/trunk/arch/powerpc/include/asm/cputable.h index fca161190db4..4911104791c3 100644 --- a/trunk/arch/powerpc/include/asm/cputable.h +++ b/trunk/arch/powerpc/include/asm/cputable.h @@ -145,7 +145,6 @@ extern const char *powerpc_base_platform; #define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040) #define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080) #define CPU_FTR_601 ASM_CONST(0x0000000000000100) -#define CPU_FTR_DBELL ASM_CONST(0x0000000000000200) #define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400) #define CPU_FTR_L3CR ASM_CONST(0x0000000000000800) #define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000) @@ -374,8 +373,7 @@ extern const char *powerpc_base_platform; CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) #define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \ - CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ - CPU_FTR_DBELL) + CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ diff --git a/trunk/arch/powerpc/include/asm/dbell.h b/trunk/arch/powerpc/include/asm/dbell.h deleted file mode 100644 index 501189a543d1..000000000000 --- a/trunk/arch/powerpc/include/asm/dbell.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2009 Freescale Semicondutor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * provides masks and opcode images for use by code generation, emulation - * and for instructions that older assemblers might not know about - */ -#ifndef _ASM_POWERPC_DBELL_H -#define _ASM_POWERPC_DBELL_H - -#include -#include - -#include - -#define PPC_DBELL_MSG_BRDCAST (0x04000000) -#define PPC_DBELL_TYPE(x) (((x) & 0xf) << 28) -enum ppc_dbell { - PPC_DBELL = 0, /* doorbell */ - PPC_DBELL_CRIT = 1, /* critical doorbell */ - PPC_G_DBELL = 2, /* guest doorbell */ - PPC_G_DBELL_CRIT = 3, /* guest critical doorbell */ - PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */ -}; - -#ifdef CONFIG_SMP -extern unsigned long dbell_smp_message[NR_CPUS]; -extern void smp_dbell_message_pass(int target, int msg); -#endif - -static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag) -{ - u32 msg = PPC_DBELL_TYPE(type) | (flags & PPC_DBELL_MSG_BRDCAST) | - (tag & 0x07ffffff); - - __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg)); -} - -#endif /* _ASM_POWERPC_DBELL_H */ diff --git a/trunk/arch/powerpc/include/asm/elf.h b/trunk/arch/powerpc/include/asm/elf.h index 1a856b15226e..cd46f023ec6d 100644 --- a/trunk/arch/powerpc/include/asm/elf.h +++ b/trunk/arch/powerpc/include/asm/elf.h @@ -7,8 +7,7 @@ #include #endif -#include - +#include #include #include #include @@ -179,8 +178,7 @@ typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; the loader. We need to make sure that it is out of the way of the program that it will "exec", and that there is sufficient room for the brk. */ -extern unsigned long randomize_et_dyn(unsigned long base); -#define ELF_ET_DYN_BASE (randomize_et_dyn(0x20000000)) +#define ELF_ET_DYN_BASE (0x20000000) /* * Our registers are always unsigned longs, whether we're a 32 bit @@ -272,14 +270,6 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp); #define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b); -/* 1GB for 64bit, 8MB for 32bit */ -#define STACK_RND_MASK (is_32bit_task() ? \ - (0x7ff >> (PAGE_SHIFT - 12)) : \ - (0x3ffff >> (PAGE_SHIFT - 12))) - -extern unsigned long arch_randomize_brk(struct mm_struct *mm); -#define arch_randomize_brk arch_randomize_brk - #endif /* __KERNEL__ */ /* diff --git a/trunk/arch/powerpc/include/asm/ftrace.h b/trunk/arch/powerpc/include/asm/ftrace.h index dde1296b8b41..e5f2ae8362f7 100644 --- a/trunk/arch/powerpc/include/asm/ftrace.h +++ b/trunk/arch/powerpc/include/asm/ftrace.h @@ -5,44 +5,7 @@ #define MCOUNT_ADDR ((long)(_mcount)) #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ -#ifdef __ASSEMBLY__ - -/* Based off of objdump optput from glibc */ - -#define MCOUNT_SAVE_FRAME \ - stwu r1,-48(r1); \ - stw r3, 12(r1); \ - stw r4, 16(r1); \ - stw r5, 20(r1); \ - stw r6, 24(r1); \ - mflr r3; \ - lwz r4, 52(r1); \ - mfcr r5; \ - stw r7, 28(r1); \ - stw r8, 32(r1); \ - stw r9, 36(r1); \ - stw r10,40(r1); \ - stw r3, 44(r1); \ - stw r5, 8(r1) - -#define MCOUNT_RESTORE_FRAME \ - lwz r6, 8(r1); \ - lwz r0, 44(r1); \ - lwz r3, 12(r1); \ - mtctr r0; \ - lwz r4, 16(r1); \ - mtcr r6; \ - lwz r5, 20(r1); \ - lwz r6, 24(r1); \ - lwz r0, 52(r1); \ - lwz r7, 28(r1); \ - lwz r8, 32(r1); \ - mtlr r0; \ - lwz r9, 36(r1); \ - lwz r10,40(r1); \ - addi r1, r1, 48 - -#else /* !__ASSEMBLY__ */ +#ifndef __ASSEMBLY__ extern void _mcount(void); #ifdef CONFIG_DYNAMIC_FTRACE diff --git a/trunk/arch/powerpc/include/asm/highmem.h b/trunk/arch/powerpc/include/asm/highmem.h index 545028f86488..04e4a620952e 100644 --- a/trunk/arch/powerpc/include/asm/highmem.h +++ b/trunk/arch/powerpc/include/asm/highmem.h @@ -39,15 +39,15 @@ extern pte_t *pkmap_page_table; * chunk of RAM. */ /* - * We use one full pte table with 4K pages. And with 16K/64K/256K pages pte - * table covers enough memory (32MB/512MB/2GB resp.), so that both FIXMAP - * and PKMAP can be placed in a single pte table. We use 512 pages for PKMAP - * in case of 16K/64K/256K page sizes. + * We use one full pte table with 4K pages. And with 16K/64K pages pte + * table covers enough memory (32MB and 512MB resp.) that both FIXMAP + * and PKMAP can be placed in single pte table. We use 1024 pages for + * PKMAP in case of 16K/64K pages. */ #ifdef CONFIG_PPC_4K_PAGES #define PKMAP_ORDER PTE_SHIFT #else -#define PKMAP_ORDER 9 +#define PKMAP_ORDER 10 #endif #define LAST_PKMAP (1 << PKMAP_ORDER) #ifndef CONFIG_PPC_4K_PAGES @@ -99,7 +99,7 @@ static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgpro #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(!pte_none(*(kmap_pte-idx))); #endif - __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1); + __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot)); local_flush_tlb_page(NULL, vaddr); return (void*) vaddr; diff --git a/trunk/arch/powerpc/include/asm/kvm.h b/trunk/arch/powerpc/include/asm/kvm.h index 4e0cf65f7f5a..f993e4198d5c 100644 --- a/trunk/arch/powerpc/include/asm/kvm.h +++ b/trunk/arch/powerpc/include/asm/kvm.h @@ -20,7 +20,7 @@ #ifndef __LINUX_KVM_POWERPC_H #define __LINUX_KVM_POWERPC_H -#include +#include struct kvm_regs { __u64 pc; diff --git a/trunk/arch/powerpc/include/asm/machdep.h b/trunk/arch/powerpc/include/asm/machdep.h index 6c34a0df82fd..2740c44ff717 100644 --- a/trunk/arch/powerpc/include/asm/machdep.h +++ b/trunk/arch/powerpc/include/asm/machdep.h @@ -327,6 +327,8 @@ extern void __devinit smp_generic_take_timebase(void); */ /* Print a boot progress message. */ void ppc64_boot_msg(unsigned int src, const char *msg); +/* Print a termination message (print only -- does not stop the kernel) */ +void ppc64_terminate_msg(unsigned int src, const char *msg); static inline void log_error(char *buf, unsigned int err_type, int fatal) { diff --git a/trunk/arch/powerpc/include/asm/mmu-44x.h b/trunk/arch/powerpc/include/asm/mmu-44x.h index 3c86576bfefa..27cc6fdcd3b7 100644 --- a/trunk/arch/powerpc/include/asm/mmu-44x.h +++ b/trunk/arch/powerpc/include/asm/mmu-44x.h @@ -83,8 +83,6 @@ typedef struct { #define PPC44x_TLBE_SIZE PPC44x_TLB_16K #elif (PAGE_SHIFT == 16) #define PPC44x_TLBE_SIZE PPC44x_TLB_64K -#elif (PAGE_SHIFT == 18) -#define PPC44x_TLBE_SIZE PPC44x_TLB_256K #else #error "Unsupported PAGE_SIZE" #endif diff --git a/trunk/arch/powerpc/include/asm/mmu-book3e.h b/trunk/arch/powerpc/include/asm/mmu-fsl-booke.h similarity index 52% rename from trunk/arch/powerpc/include/asm/mmu-book3e.h rename to trunk/arch/powerpc/include/asm/mmu-fsl-booke.h index c5363c3a7207..3f941c0f7e8e 100644 --- a/trunk/arch/powerpc/include/asm/mmu-book3e.h +++ b/trunk/arch/powerpc/include/asm/mmu-fsl-booke.h @@ -1,42 +1,26 @@ -#ifndef _ASM_POWERPC_MMU_BOOK3E_H_ -#define _ASM_POWERPC_MMU_BOOK3E_H_ +#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_ +#define _ASM_POWERPC_MMU_FSL_BOOKE_H_ /* - * Freescale Book-E/Book-3e (ISA 2.06+) MMU support + * Freescale Book-E MMU support */ -/* Book-3e defined page sizes */ -#define BOOK3E_PAGESZ_1K 0 -#define BOOK3E_PAGESZ_2K 1 -#define BOOK3E_PAGESZ_4K 2 -#define BOOK3E_PAGESZ_8K 3 -#define BOOK3E_PAGESZ_16K 4 -#define BOOK3E_PAGESZ_32K 5 -#define BOOK3E_PAGESZ_64K 6 -#define BOOK3E_PAGESZ_128K 7 -#define BOOK3E_PAGESZ_256K 8 -#define BOOK3E_PAGESZ_512K 9 -#define BOOK3E_PAGESZ_1M 10 -#define BOOK3E_PAGESZ_2M 11 -#define BOOK3E_PAGESZ_4M 12 -#define BOOK3E_PAGESZ_8M 13 -#define BOOK3E_PAGESZ_16M 14 -#define BOOK3E_PAGESZ_32M 15 -#define BOOK3E_PAGESZ_64M 16 -#define BOOK3E_PAGESZ_128M 17 -#define BOOK3E_PAGESZ_256M 18 -#define BOOK3E_PAGESZ_512M 19 -#define BOOK3E_PAGESZ_1GB 20 -#define BOOK3E_PAGESZ_2GB 21 -#define BOOK3E_PAGESZ_4GB 22 -#define BOOK3E_PAGESZ_8GB 23 -#define BOOK3E_PAGESZ_16GB 24 -#define BOOK3E_PAGESZ_32GB 25 -#define BOOK3E_PAGESZ_64GB 26 -#define BOOK3E_PAGESZ_128GB 27 -#define BOOK3E_PAGESZ_256GB 28 -#define BOOK3E_PAGESZ_512GB 29 -#define BOOK3E_PAGESZ_1TB 30 -#define BOOK3E_PAGESZ_2TB 31 +/* Book-E defined page sizes */ +#define BOOKE_PAGESZ_1K 0 +#define BOOKE_PAGESZ_4K 1 +#define BOOKE_PAGESZ_16K 2 +#define BOOKE_PAGESZ_64K 3 +#define BOOKE_PAGESZ_256K 4 +#define BOOKE_PAGESZ_1M 5 +#define BOOKE_PAGESZ_4M 6 +#define BOOKE_PAGESZ_16M 7 +#define BOOKE_PAGESZ_64M 8 +#define BOOKE_PAGESZ_256M 9 +#define BOOKE_PAGESZ_1GB 10 +#define BOOKE_PAGESZ_4GB 11 +#define BOOKE_PAGESZ_16GB 12 +#define BOOKE_PAGESZ_64GB 13 +#define BOOKE_PAGESZ_256GB 14 +#define BOOKE_PAGESZ_1TB 15 #define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) #define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) @@ -45,9 +29,8 @@ #define MAS1_VALID 0x80000000 #define MAS1_IPROT 0x40000000 #define MAS1_TID(x) ((x << 16) & 0x3FFF0000) -#define MAS1_IND 0x00002000 #define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 7) & 0x00000F80) +#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 @@ -57,7 +40,7 @@ #define MAS2_M 0x00000004 #define MAS2_G 0x00000002 #define MAS2_E 0x00000001 -#define MAS2_EPN_MASK(size) (~0 << (size + 10)) +#define MAS2_EPN_MASK(size) (~0 << (2*(size) + 10)) #define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags)) #define MAS3_RPN 0xFFFFF000 @@ -73,7 +56,7 @@ #define MAS3_SR 0x00000001 #define MAS4_TLBSELD(x) MAS0_TLBSEL(x) -#define MAS4_INDD 0x00008000 +#define MAS4_TIDDSEL 0x000F0000 #define MAS4_TSIZED(x) MAS1_TSIZE(x) #define MAS4_X0D 0x00000040 #define MAS4_X1D 0x00000020 @@ -85,7 +68,6 @@ #define MAS6_SPID0 0x3FFF0000 #define MAS6_SPID1 0x00007FFE -#define MAS6_ISIZE(x) MAS1_TSIZE(x) #define MAS6_SAS 0x00000001 #define MAS6_SPID MAS6_SPID0 @@ -100,4 +82,4 @@ typedef struct { } mm_context_t; #endif /* !__ASSEMBLY__ */ -#endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */ +#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */ diff --git a/trunk/arch/powerpc/include/asm/mmu.h b/trunk/arch/powerpc/include/asm/mmu.h index dc82dcd06aea..6e7639911318 100644 --- a/trunk/arch/powerpc/include/asm/mmu.h +++ b/trunk/arch/powerpc/include/asm/mmu.h @@ -36,9 +36,9 @@ */ #define MMU_FTR_USE_TLBIVAX_BCAST ASM_CONST(0x00040000) -/* Enable use of tlbilx invalidate instructions. +/* Enable use of tlbilx invalidate-by-PID variant. */ -#define MMU_FTR_USE_TLBILX ASM_CONST(0x00080000) +#define MMU_FTR_USE_TLBILX_PID ASM_CONST(0x00080000) /* This indicates that the processor cannot handle multiple outstanding * broadcast tlbivax or tlbsync. This makes the code use a spinlock @@ -71,9 +71,9 @@ extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup; #elif defined(CONFIG_44x) /* 44x-style software loaded TLB */ # include -#elif defined(CONFIG_PPC_BOOK3E_MMU) -/* Freescale Book-E software loaded TLB or Book-3e (ISA 2.06+) MMU */ -# include +#elif defined(CONFIG_FSL_BOOKE) +/* Freescale Book-E software loaded TLB */ +# include #elif defined (CONFIG_PPC_8xx) /* Motorola/Freescale 8xx software loaded TLB */ # include diff --git a/trunk/arch/powerpc/include/asm/page.h b/trunk/arch/powerpc/include/asm/page.h index 32cbf16f10ea..197d569f5bd3 100644 --- a/trunk/arch/powerpc/include/asm/page.h +++ b/trunk/arch/powerpc/include/asm/page.h @@ -19,14 +19,12 @@ #include /* - * On regular PPC32 page size is 4K (but we support 4K/16K/64K/256K pages + * On regular PPC32 page size is 4K (but we support 4K/16K/64K pages * on PPC44x). For PPC64 we support either 4K or 64K software * page size. When using 64K pages however, whether we are really supporting * 64K pages in HW or not is irrelevant to those definitions. */ -#if defined(CONFIG_PPC_256K_PAGES) -#define PAGE_SHIFT 18 -#elif defined(CONFIG_PPC_64K_PAGES) +#if defined(CONFIG_PPC_64K_PAGES) #define PAGE_SHIFT 16 #elif defined(CONFIG_PPC_16K_PAGES) #define PAGE_SHIFT 14 diff --git a/trunk/arch/powerpc/include/asm/page_32.h b/trunk/arch/powerpc/include/asm/page_32.h index a0e3f6e6b4ee..1458d9500381 100644 --- a/trunk/arch/powerpc/include/asm/page_32.h +++ b/trunk/arch/powerpc/include/asm/page_32.h @@ -19,11 +19,7 @@ #define PTE_FLAGS_OFFSET 0 #endif -#ifdef CONFIG_PPC_256K_PAGES -#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2 - 2) /* 1/4 of a page */ -#else #define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2) /* full page */ -#endif #ifndef __ASSEMBLY__ /* diff --git a/trunk/arch/powerpc/include/asm/pgtable-4k.h b/trunk/arch/powerpc/include/asm/pgtable-4k.h index 1dbca4e7de67..6b18ba9d2d85 100644 --- a/trunk/arch/powerpc/include/asm/pgtable-4k.h +++ b/trunk/arch/powerpc/include/asm/pgtable-4k.h @@ -60,7 +60,7 @@ /* It should be preserving the high 48 bits and then specifically */ /* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_HPTEFLAGS | _PAGE_SPECIAL) + _PAGE_HPTEFLAGS) /* Bits to mask out from a PMD to get to the PTE page */ #define PMD_MASKED_BITS 0 diff --git a/trunk/arch/powerpc/include/asm/pgtable-64k.h b/trunk/arch/powerpc/include/asm/pgtable-64k.h index 7389003349a6..07b0d8f09cb6 100644 --- a/trunk/arch/powerpc/include/asm/pgtable-64k.h +++ b/trunk/arch/powerpc/include/asm/pgtable-64k.h @@ -114,7 +114,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) * pgprot changes */ #define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_SPECIAL) + _PAGE_ACCESSED) /* Bits to mask out from a PMD to get to the PTE page */ #define PMD_MASKED_BITS 0x1ff diff --git a/trunk/arch/powerpc/include/asm/pgtable-ppc32.h b/trunk/arch/powerpc/include/asm/pgtable-ppc32.h index 98bd7c5fcd0e..f69a4d977729 100644 --- a/trunk/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/trunk/arch/powerpc/include/asm/pgtable-ppc32.h @@ -429,10 +429,8 @@ extern int icache_44x_need_flush; #define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() #endif -#define _PAGE_HPTEFLAGS _PAGE_HASHPTE +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SPECIAL) #define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ _PAGE_WRITETHRU | _PAGE_ENDIAN | \ @@ -668,6 +666,44 @@ static inline unsigned long long pte_update(pte_t *p, } #endif /* CONFIG_PTE_64BIT */ +/* + * set_pte stores a linux PTE into the linux page table. + * On machines which use an MMU hash table we avoid changing the + * _PAGE_HASHPTE bit. + */ + +static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ +#if (_PAGE_HASHPTE != 0) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT) + pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); +#elif defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) +#if _PAGE_HASHPTE != 0 + if (pte_val(*ptep) & _PAGE_HASHPTE) + flush_hash_entry(mm, ptep, addr); +#endif + __asm__ __volatile__("\ + stw%U0%X0 %2,%0\n\ + eieio\n\ + stw%U0%X0 %L2,%1" + : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4)) + : "r" (pte) : "memory"); +#else + *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) + | (pte_val(pte) & ~_PAGE_HASHPTE)); +#endif +} + + +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ +#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) && defined(CONFIG_DEBUG_VM) + WARN_ON(pte_present(*ptep)); +#endif + __set_pte_at(mm, addr, ptep, pte); +} + /* * 2.6 calls this without flushing the TLB entry; this is wrong * for our hash-based implementation, we fix that up here. @@ -708,14 +744,24 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, } -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) { unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | - _PAGE_HWEXEC | _PAGE_EXEC); + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); pte_update(ptep, 0, bits); } +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + __ptep_set_access_flags(__ptep, __entry, __dirty); \ + flush_tlb_page_nohash(__vma, __address); \ + } \ + __changed; \ +}) + #define __HAVE_ARCH_PTE_SAME #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) diff --git a/trunk/arch/powerpc/include/asm/pgtable-ppc64.h b/trunk/arch/powerpc/include/asm/pgtable-ppc64.h index c627877fcf16..b0f18be81d9f 100644 --- a/trunk/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/trunk/arch/powerpc/include/asm/pgtable-ppc64.h @@ -125,8 +125,6 @@ #define _PTEIDX_SECONDARY 0x8 #define _PTEIDX_GROUP_IX 0x7 -/* To make some generic powerpc code happy */ -#define _PAGE_HWEXEC 0 /* * POWER4 and newer have per page execute protection, older chips can only @@ -287,10 +285,6 @@ static inline unsigned long pte_update(struct mm_struct *mm, : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) : "cc" ); - /* huge pages use the old page table lock */ - if (!huge) - assert_pte_locked(mm, addr); - if (old & _PAGE_HASHPTE) hpte_need_flush(mm, addr, ptep, old, huge); return old; @@ -365,11 +359,23 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_update(mm, addr, ptep, ~0UL, 0); } +/* + * set_pte stores a linux PTE into the linux page table. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + if (pte_present(*ptep)) + pte_clear(mm, addr, ptep); + pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); + *ptep = pte; +} /* Set the dirty and/or accessed bits atomically in a linux PTE, this * function doesn't need to flush the hash entry */ -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) { unsigned long bits = pte_val(entry) & (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); @@ -386,6 +392,15 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY) :"cc"); } +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + __ptep_set_access_flags(__ptep, __entry, __dirty); \ + flush_tlb_page_nohash(__vma, __address); \ + } \ + __changed; \ +}) #define __HAVE_ARCH_PTE_SAME #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) diff --git a/trunk/arch/powerpc/include/asm/pgtable.h b/trunk/arch/powerpc/include/asm/pgtable.h index 5c1c4880723c..07f55e601696 100644 --- a/trunk/arch/powerpc/include/asm/pgtable.h +++ b/trunk/arch/powerpc/include/asm/pgtable.h @@ -6,17 +6,7 @@ #include /* For TASK_SIZE */ #include #include - struct mm_struct; - -#ifdef CONFIG_DEBUG_VM -extern void assert_pte_locked(struct mm_struct *mm, unsigned long addr); -#else /* CONFIG_DEBUG_VM */ -static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr) -{ -} -#endif /* !CONFIG_DEBUG_VM */ - #endif /* !__ASSEMBLY__ */ #if defined(CONFIG_PPC64) @@ -27,80 +17,6 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr) #ifndef __ASSEMBLY__ -/* Insert a PTE, top-level function is out of line. It uses an inline - * low level function in the respective pgtable-* files - */ -extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, - pte_t pte); - -/* This low level function performs the actual PTE insertion - * Setting the PTE depends on the MMU type and other factors. It's - * an horrible mess that I'm not going to try to clean up now but - * I'm keeping it in one place rather than spread around - */ -static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte, int percpu) -{ -#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT) - /* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the - * helper pte_update() which does an atomic update. We need to do that - * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a - * per-CPU PTE such as a kmap_atomic, we do a simple update preserving - * the hash bits instead (ie, same as the non-SMP case) - */ - if (percpu) - *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) - | (pte_val(pte) & ~_PAGE_HASHPTE)); - else - pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte)); - -#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) - /* Second case is 32-bit with 64-bit PTE in SMP mode. In this case, we - * can just store as long as we do the two halves in the right order - * with a barrier in between. This is possible because we take care, - * in the hash code, to pre-invalidate if the PTE was already hashed, - * which synchronizes us with any concurrent invalidation. - * In the percpu case, we also fallback to the simple update preserving - * the hash bits - */ - if (percpu) { - *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) - | (pte_val(pte) & ~_PAGE_HASHPTE)); - return; - } -#if _PAGE_HASHPTE != 0 - if (pte_val(*ptep) & _PAGE_HASHPTE) - flush_hash_entry(mm, ptep, addr); -#endif - __asm__ __volatile__("\ - stw%U0%X0 %2,%0\n\ - eieio\n\ - stw%U0%X0 %L2,%1" - : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4)) - : "r" (pte) : "memory"); - -#elif defined(CONFIG_PPC_STD_MMU_32) - /* Third case is 32-bit hash table in UP mode, we need to preserve - * the _PAGE_HASHPTE bit since we may not have invalidated the previous - * translation in the hash yet (done in a subsequent flush_tlb_xxx()) - * and see we need to keep track that this PTE needs invalidating - */ - *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) - | (pte_val(pte) & ~_PAGE_HASHPTE)); - -#else - /* Anything else just stores the PTE normally. That covers all 64-bit - * cases, and 32-bit non-hash with 64-bit PTEs in UP mode - */ - *ptep = pte; -#endif -} - - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, - pte_t *ptep, pte_t entry, int dirty); - /* * Macro to mark a page protection value as "uncacheable". */ diff --git a/trunk/arch/powerpc/include/asm/ppc-opcode.h b/trunk/arch/powerpc/include/asm/ppc-opcode.h deleted file mode 100644 index f4a4db8d5555..000000000000 --- a/trunk/arch/powerpc/include/asm/ppc-opcode.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright 2009 Freescale Semicondutor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * provides masks and opcode images for use by code generation, emulation - * and for instructions that older assemblers might not know about - */ -#ifndef _ASM_POWERPC_PPC_OPCODE_H -#define _ASM_POWERPC_PPC_OPCODE_H - -#include -#include - -/* sorted alphabetically */ -#define PPC_INST_DCBA 0x7c0005ec -#define PPC_INST_DCBA_MASK 0xfc0007fe -#define PPC_INST_DCBAL 0x7c2005ec -#define PPC_INST_DCBZL 0x7c2007ec -#define PPC_INST_ISEL 0x7c00001e -#define PPC_INST_ISEL_MASK 0xfc00003e -#define PPC_INST_LSWI 0x7c0004aa -#define PPC_INST_LSWX 0x7c00042a -#define PPC_INST_LWSYNC 0x7c2004ac -#define PPC_INST_MCRXR 0x7c000400 -#define PPC_INST_MCRXR_MASK 0xfc0007fe -#define PPC_INST_MFSPR_PVR 0x7c1f42a6 -#define PPC_INST_MFSPR_PVR_MASK 0xfc1fffff -#define PPC_INST_MSGSND 0x7c00019c -#define PPC_INST_NOP 0x60000000 -#define PPC_INST_POPCNTB 0x7c0000f4 -#define PPC_INST_POPCNTB_MASK 0xfc0007fe -#define PPC_INST_RFCI 0x4c000066 -#define PPC_INST_RFDI 0x4c00004e -#define PPC_INST_RFMCI 0x4c00004c - -#define PPC_INST_STRING 0x7c00042a -#define PPC_INST_STRING_MASK 0xfc0007fe -#define PPC_INST_STRING_GEN_MASK 0xfc00067e - -#define PPC_INST_STSWI 0x7c0005aa -#define PPC_INST_STSWX 0x7c00052a -#define PPC_INST_TLBILX 0x7c000626 -#define PPC_INST_WAIT 0x7c00007c - -/* macros to insert fields into opcodes */ -#define __PPC_RA(a) ((a & 0x1f) << 16) -#define __PPC_RB(b) ((b & 0x1f) << 11) -#define __PPC_T_TLB(t) ((t & 0x3) << 21) -#define __PPC_WC(w) ((w & 0x3) << 21) - -/* Deal with instructions that older assemblers aren't aware of */ -#define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \ - __PPC_RA(a) | __PPC_RB(b)) -#define PPC_DCBZL(a, b) stringify_in_c(.long PPC_INST_DCBZL | \ - __PPC_RA(a) | __PPC_RB(b)) -#define PPC_MSGSND(b) stringify_in_c(.long PPC_INST_MSGSND | \ - __PPC_RB(b)) -#define PPC_RFCI stringify_in_c(.long PPC_INST_RFCI) -#define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI) -#define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI) -#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \ - __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b)) -#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) -#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) -#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) -#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ - __PPC_WC(w)) - -#endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/trunk/arch/powerpc/include/asm/ppc_asm.h b/trunk/arch/powerpc/include/asm/ppc_asm.h index f59a66684aed..1a0d628eb114 100644 --- a/trunk/arch/powerpc/include/asm/ppc_asm.h +++ b/trunk/arch/powerpc/include/asm/ppc_asm.h @@ -7,7 +7,6 @@ #include #include #include -#include #ifndef __ASSEMBLY__ #error __FILE__ should only be used in assembler files @@ -168,6 +167,11 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority #define HMT_HIGH or 3,3,3 +/* handle instructions that older assemblers may not know */ +#define RFCI .long 0x4c000066 /* rfci instruction */ +#define RFDI .long 0x4c00004e /* rfdi instruction */ +#define RFMCI .long 0x4c00004c /* rfmci instruction */ + #ifdef __KERNEL__ #ifdef CONFIG_PPC64 diff --git a/trunk/arch/powerpc/include/asm/ps3fb.h b/trunk/arch/powerpc/include/asm/ps3fb.h index 1a91daf362c8..3f121fe4010d 100644 --- a/trunk/arch/powerpc/include/asm/ps3fb.h +++ b/trunk/arch/powerpc/include/asm/ps3fb.h @@ -20,7 +20,6 @@ #define _ASM_POWERPC_PS3FB_H_ #include -#include /* ioctl */ #define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */ diff --git a/trunk/arch/powerpc/include/asm/reg_booke.h b/trunk/arch/powerpc/include/asm/reg_booke.h index 597debe780bd..67453766bff1 100644 --- a/trunk/arch/powerpc/include/asm/reg_booke.h +++ b/trunk/arch/powerpc/include/asm/reg_booke.h @@ -110,7 +110,6 @@ #define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ #define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ #define SPRN_MMUCSR0 0x3F4 /* MMU Control and Status Register 0 */ -#define SPRN_MMUCFG 0x3F7 /* MMU Configuration Register */ #define SPRN_PIT 0x3DB /* Programmable Interval Timer */ #define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ #define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ diff --git a/trunk/arch/powerpc/include/asm/spu_info.h b/trunk/arch/powerpc/include/asm/spu_info.h index 1286c823f0d8..3545efbf9891 100644 --- a/trunk/arch/powerpc/include/asm/spu_info.h +++ b/trunk/arch/powerpc/include/asm/spu_info.h @@ -23,10 +23,9 @@ #ifndef _SPU_INFO_H #define _SPU_INFO_H -#include - #ifdef __KERNEL__ #include +#include #else struct mfc_cq_sr { __u64 mfc_cq_data0_RW; diff --git a/trunk/arch/powerpc/include/asm/swab.h b/trunk/arch/powerpc/include/asm/swab.h index c581e3ef73ed..ef824ae4b79c 100644 --- a/trunk/arch/powerpc/include/asm/swab.h +++ b/trunk/arch/powerpc/include/asm/swab.h @@ -8,7 +8,7 @@ * 2 of the License, or (at your option) any later version. */ -#include +#include #include #ifdef __GNUC__ diff --git a/trunk/arch/powerpc/include/asm/system.h b/trunk/arch/powerpc/include/asm/system.h index f612798e1c93..2a4be19a92c4 100644 --- a/trunk/arch/powerpc/include/asm/system.h +++ b/trunk/arch/powerpc/include/asm/system.h @@ -531,7 +531,7 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) #endif -extern unsigned long arch_align_stack(unsigned long sp); +#define arch_align_stack(x) (x) /* Used in very early kernel initialization. */ extern unsigned long reloc_offset(void); diff --git a/trunk/arch/powerpc/include/asm/thread_info.h b/trunk/arch/powerpc/include/asm/thread_info.h index 9aba5a38a7c4..9665a26a253a 100644 --- a/trunk/arch/powerpc/include/asm/thread_info.h +++ b/trunk/arch/powerpc/include/asm/thread_info.h @@ -12,10 +12,8 @@ /* We have 8k stacks on ppc32 and 16k on ppc64 */ -#if defined(CONFIG_PPC64) +#ifdef CONFIG_PPC64 #define THREAD_SHIFT 14 -#elif defined(CONFIG_PPC_256K_PAGES) -#define THREAD_SHIFT 15 #else #define THREAD_SHIFT 13 #endif @@ -156,13 +154,6 @@ static inline void set_restore_sigmask(void) ti->local_flags |= _TLF_RESTORE_SIGMASK; set_bit(TIF_SIGPENDING, &ti->flags); } - -#ifdef CONFIG_PPC64 -#define is_32bit_task() (test_thread_flag(TIF_32BIT)) -#else -#define is_32bit_task() (1) -#endif - #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/trunk/arch/powerpc/kernel/Makefile b/trunk/arch/powerpc/kernel/Makefile index dfec3d2790b2..8d1a419df35d 100644 --- a/trunk/arch/powerpc/kernel/Makefile +++ b/trunk/arch/powerpc/kernel/Makefile @@ -18,10 +18,12 @@ CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog -# do not trace tracer code + +ifdef CONFIG_DYNAMIC_FTRACE +# dynamic ftrace setup. CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog -# timers used by tracing -CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog +endif + endif obj-y := cputable.o ptrace.o syscalls.o \ @@ -59,7 +61,6 @@ obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o @@ -93,7 +94,6 @@ obj-$(CONFIG_AUDIT) += audit.o obj64-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o -obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o diff --git a/trunk/arch/powerpc/kernel/align.c b/trunk/arch/powerpc/kernel/align.c index 5ffcfaa77d6a..5af4e9b2dbe2 100644 --- a/trunk/arch/powerpc/kernel/align.c +++ b/trunk/arch/powerpc/kernel/align.c @@ -187,7 +187,7 @@ static struct aligninfo aligninfo[128] = { { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ { 8, ST+F+U }, /* 11 1 1011: stfdux */ INVALID, /* 11 1 1100 */ - { 4, LD+F }, /* 11 1 1101: lfiwzx */ + INVALID, /* 11 1 1101 */ INVALID, /* 11 1 1110 */ INVALID, /* 11 1 1111 */ }; @@ -367,24 +367,27 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg, unsigned int flags) { - char *ptr0 = (char *) ¤t->thread.TS_FPR(reg); - char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1); - int i, ret, sw = 0; + char *ptr = (char *) ¤t->thread.TS_FPR(reg); + int i, ret; if (!(flags & F)) return 0; if (reg & 1) return 0; /* invalid form: FRS/FRT must be even */ - if (flags & SW) - sw = 7; - ret = 0; - for (i = 0; i < 8; ++i) { - if (!(flags & ST)) { - ret |= __get_user(ptr0[i^sw], addr + i); - ret |= __get_user(ptr1[i^sw], addr + i + 8); - } else { - ret |= __put_user(ptr0[i^sw], addr + i); - ret |= __put_user(ptr1[i^sw], addr + i + 8); + if (!(flags & SW)) { + /* not byte-swapped - easy */ + if (!(flags & ST)) + ret = __copy_from_user(ptr, addr, 16); + else + ret = __copy_to_user(addr, ptr, 16); + } else { + /* each FPR value is byte-swapped separately */ + ret = 0; + for (i = 0; i < 16; ++i) { + if (!(flags & ST)) + ret |= __get_user(ptr[i^7], addr + i); + else + ret |= __put_user(ptr[i^7], addr + i); } } if (ret) @@ -643,16 +646,11 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg, unsigned int areg, struct pt_regs *regs, unsigned int flags, unsigned int length) { - char *ptr; + char *ptr = (char *) ¤t->thread.TS_FPR(reg); int ret = 0; flush_vsx_to_thread(current); - if (reg < 32) - ptr = (char *) ¤t->thread.TS_FPR(reg); - else - ptr = (char *) ¤t->thread.vr[reg - 32]; - if (flags & ST) ret = __copy_to_user(addr, ptr, length); else { diff --git a/trunk/arch/powerpc/kernel/cpu_setup_44x.S b/trunk/arch/powerpc/kernel/cpu_setup_44x.S index 7d606f89a839..10b4ab1008af 100644 --- a/trunk/arch/powerpc/kernel/cpu_setup_44x.S +++ b/trunk/arch/powerpc/kernel/cpu_setup_44x.S @@ -34,7 +34,6 @@ _GLOBAL(__setup_cpu_440grx) blr _GLOBAL(__setup_cpu_460ex) _GLOBAL(__setup_cpu_460gt) -_GLOBAL(__setup_cpu_460sx) mflr r4 bl __init_fpu_44x bl __fixup_440A_mcheck diff --git a/trunk/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/trunk/arch/powerpc/kernel/cpu_setup_fsl_booke.S deleted file mode 100644 index eb4b9adcedb4..000000000000 --- a/trunk/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Kumar Gala - * Copyright 2009 Freescale Semiconductor, Inc. - * - * Based on cpu_setup_6xx code by - * Benjamin Herrenschmidt - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include - -_GLOBAL(__setup_cpu_e200) - /* enable dedicated debug exception handling resources (Debug APU) */ - mfspr r3,SPRN_HID0 - ori r3,r3,HID0_DAPUEN@l - mtspr SPRN_HID0,r3 - b __setup_e200_ivors -_GLOBAL(__setup_cpu_e500v1) -_GLOBAL(__setup_cpu_e500v2) - b __setup_e500_ivors -_GLOBAL(__setup_cpu_e500mc) - b __setup_e500mc_ivors - diff --git a/trunk/arch/powerpc/kernel/cputable.c b/trunk/arch/powerpc/kernel/cputable.c index b2938e0ef2f3..923f87aff20a 100644 --- a/trunk/arch/powerpc/kernel/cputable.c +++ b/trunk/arch/powerpc/kernel/cputable.c @@ -35,10 +35,6 @@ const char *powerpc_base_platform; * and ppc64 */ #ifdef CONFIG_PPC32 -extern void __setup_cpu_e200(unsigned long offset, struct cpu_spec* spec); -extern void __setup_cpu_e500v1(unsigned long offset, struct cpu_spec* spec); -extern void __setup_cpu_e500v2(unsigned long offset, struct cpu_spec* spec); -extern void __setup_cpu_e500mc(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440ep(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec); @@ -47,7 +43,6 @@ extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec); -extern void __setup_cpu_460sx(unsigned long offset, struct cpu_spec *spec); extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec); @@ -1639,19 +1634,6 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, - { /* 460SX */ - .pvr_mask = 0xffffff00, - .pvr_value = 0x13541800, - .cpu_name = "460SX", - .cpu_features = CPU_FTRS_44X, - .cpu_user_features = COMMON_USER_BOOKE, - .mmu_features = MMU_FTR_TYPE_44x, - .icache_bsize = 32, - .dcache_bsize = 32, - .cpu_setup = __setup_cpu_460sx, - .machine_check = machine_check_440A, - .platform = "ppc440", - }, { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, @@ -1705,7 +1687,6 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_UNIFIED_CACHE, .mmu_features = MMU_FTR_TYPE_FSL_E, .dcache_bsize = 32, - .cpu_setup = __setup_cpu_e200, .machine_check = machine_check_e200, .platform = "ppc5554", } @@ -1725,7 +1706,6 @@ static struct cpu_spec __initdata cpu_specs[] = { .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", .oprofile_type = PPC_OPROFILE_FSL_EMB, - .cpu_setup = __setup_cpu_e500v1, .machine_check = machine_check_e500, .platform = "ppc8540", }, @@ -1744,7 +1724,6 @@ static struct cpu_spec __initdata cpu_specs[] = { .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", .oprofile_type = PPC_OPROFILE_FSL_EMB, - .cpu_setup = __setup_cpu_e500v2, .machine_check = machine_check_e500, .platform = "ppc8548", }, @@ -1754,14 +1733,12 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_name = "e500mc", .cpu_features = CPU_FTRS_E500MC, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, - .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | - MMU_FTR_USE_TLBILX, + .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS, .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", /* xxx - galak, e500mc? */ .oprofile_type = PPC_OPROFILE_FSL_EMB, - .cpu_setup = __setup_cpu_e500mc, .machine_check = machine_check_e500, .platform = "ppce500mc", }, diff --git a/trunk/arch/powerpc/kernel/crash_dump.c b/trunk/arch/powerpc/kernel/crash_dump.c index 5fb667a60894..19671aca6591 100644 --- a/trunk/arch/powerpc/kernel/crash_dump.c +++ b/trunk/arch/powerpc/kernel/crash_dump.c @@ -48,7 +48,7 @@ static void __init create_trampoline(unsigned long addr) * branch to "addr" we jump to ("addr" + 32 MB). Although it requires * two instructions it doesn't require any registers. */ - patch_instruction(p, PPC_INST_NOP); + patch_instruction(p, PPC_NOP_INSTR); patch_branch(++p, addr + PHYSICAL_START, 0); } diff --git a/trunk/arch/powerpc/kernel/dbell.c b/trunk/arch/powerpc/kernel/dbell.c deleted file mode 100644 index 1493734cd871..000000000000 --- a/trunk/arch/powerpc/kernel/dbell.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Author: Kumar Gala - * - * Copyright 2009 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include - -#include - -#ifdef CONFIG_SMP -unsigned long dbell_smp_message[NR_CPUS]; - -void smp_dbell_message_pass(int target, int msg) -{ - int i; - - if(target < NR_CPUS) { - set_bit(msg, &dbell_smp_message[target]); - ppc_msgsnd(PPC_DBELL, 0, target); - } - else if(target == MSG_ALL_BUT_SELF) { - for_each_online_cpu(i) { - if (i == smp_processor_id()) - continue; - set_bit(msg, &dbell_smp_message[i]); - ppc_msgsnd(PPC_DBELL, 0, i); - } - } - else { /* target == MSG_ALL */ - for_each_online_cpu(i) - set_bit(msg, &dbell_smp_message[i]); - ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0); - } -} -#endif diff --git a/trunk/arch/powerpc/kernel/entry_32.S b/trunk/arch/powerpc/kernel/entry_32.S index 4dd38f129153..6f7eb7e00c79 100644 --- a/trunk/arch/powerpc/kernel/entry_32.S +++ b/trunk/arch/powerpc/kernel/entry_32.S @@ -63,7 +63,7 @@ debug_transfer_to_handler: .globl crit_transfer_to_handler crit_transfer_to_handler: -#ifdef CONFIG_PPC_BOOK3E_MMU +#ifdef CONFIG_FSL_BOOKE mfspr r0,SPRN_MAS0 stw r0,MAS0(r11) mfspr r0,SPRN_MAS1 @@ -78,7 +78,7 @@ crit_transfer_to_handler: mfspr r0,SPRN_MAS7 stw r0,MAS7(r11) #endif /* CONFIG_PHYS_64BIT */ -#endif /* CONFIG_PPC_BOOK3E_MMU */ +#endif /* CONFIG_FSL_BOOKE */ #ifdef CONFIG_44x mfspr r0,SPRN_MMUCR stw r0,MMUCR(r11) @@ -914,7 +914,7 @@ exc_exit_restart_end: mtspr SPRN_##exc_lvl_srr0,r9; \ mtspr SPRN_##exc_lvl_srr1,r10; -#if defined(CONFIG_PPC_BOOK3E_MMU) +#if defined(CONFIG_FSL_BOOKE) #ifdef CONFIG_PHYS_64BIT #define RESTORE_MAS7 \ lwz r11,MAS7(r1); \ @@ -956,7 +956,7 @@ ret_from_crit_exc: lwz r10,crit_srr1@l(r10); mtspr SPRN_SRR0,r9; mtspr SPRN_SRR1,r10; - RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI) + RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI) #endif /* CONFIG_40x */ #ifdef CONFIG_BOOKE @@ -967,7 +967,7 @@ ret_from_crit_exc: stw r10,KSP_LIMIT(r9) RESTORE_xSRR(SRR0,SRR1); RESTORE_MMU_REGS; - RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI) + RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI) .globl ret_from_debug_exc ret_from_debug_exc: @@ -981,7 +981,7 @@ ret_from_debug_exc: RESTORE_xSRR(SRR0,SRR1); RESTORE_xSRR(CSRR0,CSRR1); RESTORE_MMU_REGS; - RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, PPC_RFDI) + RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI) .globl ret_from_mcheck_exc ret_from_mcheck_exc: @@ -992,7 +992,7 @@ ret_from_mcheck_exc: RESTORE_xSRR(CSRR0,CSRR1); RESTORE_xSRR(DSRR0,DSRR1); RESTORE_MMU_REGS; - RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, PPC_RFMCI) + RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI) #endif /* CONFIG_BOOKE */ /* @@ -1176,27 +1176,59 @@ _GLOBAL(_mcount) bctr _GLOBAL(ftrace_caller) - MCOUNT_SAVE_FRAME - /* r3 ends up with link register */ + /* Based off of objdump optput from glibc */ + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) subi r3, r3, MCOUNT_INSN_SIZE .globl ftrace_call ftrace_call: bl ftrace_stub nop -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -.globl ftrace_graph_call -ftrace_graph_call: - b ftrace_graph_stub -_GLOBAL(ftrace_graph_stub) -#endif - MCOUNT_RESTORE_FRAME - /* old link register ends up in ctr reg */ + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 bctr #else _GLOBAL(mcount) _GLOBAL(_mcount) - - MCOUNT_SAVE_FRAME + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) subi r3, r3, MCOUNT_INSN_SIZE LOAD_REG_ADDR(r5, ftrace_trace_function) @@ -1204,55 +1236,28 @@ _GLOBAL(_mcount) mtctr r5 bctrl + nop -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - b ftrace_graph_caller -#endif - MCOUNT_RESTORE_FRAME + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 bctr #endif _GLOBAL(ftrace_stub) blr -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -_GLOBAL(ftrace_graph_caller) - /* load r4 with local address */ - lwz r4, 44(r1) - subi r4, r4, MCOUNT_INSN_SIZE - - /* get the parent address */ - addi r3, r1, 52 - - bl prepare_ftrace_return - nop - - MCOUNT_RESTORE_FRAME - /* old link register ends up in ctr reg */ - bctr - -_GLOBAL(return_to_handler) - /* need to save return values */ - stwu r1, -32(r1) - stw r3, 20(r1) - stw r4, 16(r1) - stw r31, 12(r1) - mr r31, r1 - - bl ftrace_return_to_handler - nop - - /* return value has real return address */ - mtlr r3 - - lwz r3, 20(r1) - lwz r4, 16(r1) - lwz r31,12(r1) - lwz r1, 0(r1) - - /* Jump back to real return address */ - blr -#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ - #endif /* CONFIG_MCOUNT */ diff --git a/trunk/arch/powerpc/kernel/entry_64.S b/trunk/arch/powerpc/kernel/entry_64.S index abfc32330479..383ed6eb0085 100644 --- a/trunk/arch/powerpc/kernel/entry_64.S +++ b/trunk/arch/powerpc/kernel/entry_64.S @@ -908,12 +908,6 @@ _GLOBAL(ftrace_caller) ftrace_call: bl ftrace_stub nop -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -.globl ftrace_graph_call -ftrace_graph_call: - b ftrace_graph_stub -_GLOBAL(ftrace_graph_stub) -#endif ld r0, 128(r1) mtlr r0 addi r1, r1, 112 @@ -937,90 +931,13 @@ _GLOBAL(_mcount) ld r5,0(r5) mtctr r5 bctrl - nop - - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - b ftrace_graph_caller -#endif - ld r0, 128(r1) - mtlr r0 - addi r1, r1, 112 -_GLOBAL(ftrace_stub) - blr - -#endif /* CONFIG_DYNAMIC_FTRACE */ - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -_GLOBAL(ftrace_graph_caller) - /* load r4 with local address */ - ld r4, 128(r1) - subi r4, r4, MCOUNT_INSN_SIZE - /* get the parent address */ - ld r11, 112(r1) - addi r3, r11, 16 - - bl .prepare_ftrace_return nop - ld r0, 128(r1) mtlr r0 addi r1, r1, 112 +_GLOBAL(ftrace_stub) blr -_GLOBAL(return_to_handler) - /* need to save return values */ - std r4, -24(r1) - std r3, -16(r1) - std r31, -8(r1) - mr r31, r1 - stdu r1, -112(r1) - - bl .ftrace_return_to_handler - nop - - /* return value has real return address */ - mtlr r3 - - ld r1, 0(r1) - ld r4, -24(r1) - ld r3, -16(r1) - ld r31, -8(r1) - - /* Jump back to real return address */ - blr - -_GLOBAL(mod_return_to_handler) - /* need to save return values */ - std r4, -32(r1) - std r3, -24(r1) - /* save TOC */ - std r2, -16(r1) - std r31, -8(r1) - mr r31, r1 - stdu r1, -112(r1) - - /* - * We are in a module using the module's TOC. - * Switch to our TOC to run inside the core kernel. - */ - LOAD_REG_IMMEDIATE(r4,ftrace_return_to_handler) - ld r2, 8(r4) - - bl .ftrace_return_to_handler - nop - - /* return value has real return address */ - mtlr r3 - - ld r1, 0(r1) - ld r4, -32(r1) - ld r3, -24(r1) - ld r2, -16(r1) - ld r31, -8(r1) - - /* Jump back to real return address */ - blr -#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -#endif /* CONFIG_FUNCTION_TRACER */ +#endif +#endif diff --git a/trunk/arch/powerpc/kernel/ftrace.c b/trunk/arch/powerpc/kernel/ftrace.c index 5b5d16b2cac8..5355244c99ff 100644 --- a/trunk/arch/powerpc/kernel/ftrace.c +++ b/trunk/arch/powerpc/kernel/ftrace.c @@ -5,9 +5,6 @@ * * Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box. * - * Added function graph tracer code, taken from x86 that was written - * by Frederic Weisbecker, and ported to PPC by Steven Rostedt. - * */ #include @@ -23,6 +20,14 @@ #include #include +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt , ...) do { } while (0) +#endif + +static unsigned int ftrace_nop = PPC_NOP_INSTR; + #ifdef CONFIG_PPC32 # define GET_ADDR(addr) addr #else @@ -30,23 +35,37 @@ # define GET_ADDR(addr) (*(unsigned long *)addr) #endif -#ifdef CONFIG_DYNAMIC_FTRACE -static unsigned int ftrace_nop_replace(void) + +static unsigned int ftrace_calc_offset(long ip, long addr) { - return PPC_INST_NOP; + return (int)(addr - ip); } -static unsigned int -ftrace_call_replace(unsigned long ip, unsigned long addr, int link) +static unsigned char *ftrace_nop_replace(void) { - unsigned int op; + return (char *)&ftrace_nop; +} + +static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static unsigned int op; + /* + * It would be nice to just use create_function_call, but that will + * update the code itself. Here we need to just return the + * instruction that is going to be modified, without modifying the + * code. + */ addr = GET_ADDR(addr); - /* if (link) set op to 'bl' else 'b' */ - op = create_branch((unsigned int *)ip, addr, link ? 1 : 0); + /* Set to "bl addr" */ + op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffc); - return op; + /* + * No locking needed, this must be called via kstop_machine + * which in essence is like running on a uniprocessor machine. + */ + return (unsigned char *)&op; } #ifdef CONFIG_PPC64 @@ -58,9 +77,10 @@ ftrace_call_replace(unsigned long ip, unsigned long addr, int link) #endif static int -ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new) +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) { - unsigned int replaced; + unsigned char replaced[MCOUNT_INSN_SIZE]; /* * Note: Due to modules and __init, code can @@ -73,15 +93,15 @@ ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new) */ /* read the text we want to modify */ - if (probe_kernel_read(&replaced, (void *)ip, MCOUNT_INSN_SIZE)) + if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE)) return -EFAULT; /* Make sure it is what we expect it to be */ - if (replaced != old) + if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0) return -EINVAL; /* replace the text with the new text */ - if (probe_kernel_write((void *)ip, &new, MCOUNT_INSN_SIZE)) + if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE)) return -EPERM; flush_icache_range(ip, ip + 8); @@ -99,8 +119,6 @@ static int test_24bit_addr(unsigned long ip, unsigned long addr) return create_branch((unsigned int *)ip, addr, 0); } -#ifdef CONFIG_MODULES - static int is_bl_op(unsigned int op) { return (op & 0xfc000003) == 0x48000001; @@ -157,7 +175,7 @@ __ftrace_make_nop(struct module *mod, * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12) */ - pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); + DEBUGP("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -165,7 +183,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x", jmp[0], jmp[1]); + DEBUGP(" %08x %08x", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d820000) || @@ -177,22 +195,21 @@ __ftrace_make_nop(struct module *mod, return -EINVAL; } - /* The bottom half is signed extended */ - offset = ((unsigned)((unsigned short)jmp[0]) << 16) + - (int)((short)jmp[1]); + offset = (unsigned)((unsigned short)jmp[0]) << 16 | + (unsigned)((unsigned short)jmp[1]); - pr_debug(" %x ", offset); + DEBUGP(" %x ", offset); /* get the address this jumps too */ tramp = mod->arch.toc + offset + 32; - pr_debug("toc: %lx", tramp); + DEBUGP("toc: %lx", tramp); if (probe_kernel_read(jmp, (void *)tramp, 8)) { printk(KERN_ERR "Failed to read %lx\n", tramp); return -EFAULT; } - pr_debug(" %08x %08x\n", jmp[0], jmp[1]); + DEBUGP(" %08x %08x\n", jmp[0], jmp[1]); ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; @@ -269,7 +286,7 @@ __ftrace_make_nop(struct module *mod, * 0x4e, 0x80, 0x04, 0x20 bctr */ - pr_debug("ip:%lx jumps to %lx", ip, tramp); + DEBUGP("ip:%lx jumps to %lx", ip, tramp); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -277,7 +294,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x ", jmp[0], jmp[1]); + DEBUGP(" %08x %08x ", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d600000) || @@ -293,7 +310,7 @@ __ftrace_make_nop(struct module *mod, if (tramp & 0x8000) tramp -= 0x10000; - pr_debug(" %x ", tramp); + DEBUGP(" %x ", tramp); if (tramp != addr) { printk(KERN_ERR @@ -302,7 +319,7 @@ __ftrace_make_nop(struct module *mod, return -EINVAL; } - op = PPC_INST_NOP; + op = PPC_NOP_INSTR; if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) return -EPERM; @@ -312,13 +329,12 @@ __ftrace_make_nop(struct module *mod, return 0; } #endif /* PPC64 */ -#endif /* CONFIG_MODULES */ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { + unsigned char *old, *new; unsigned long ip = rec->ip; - unsigned int old, new; /* * If the calling address is more that 24 bits away, @@ -327,12 +343,11 @@ int ftrace_make_nop(struct module *mod, */ if (test_24bit_addr(ip, addr)) { /* within range */ - old = ftrace_call_replace(ip, addr, 1); + old = ftrace_call_replace(ip, addr); new = ftrace_nop_replace(); return ftrace_modify_code(ip, old, new); } -#ifdef CONFIG_MODULES /* * Out of range jumps are called from modules. * We should either already have a pointer to the module @@ -357,13 +372,9 @@ int ftrace_make_nop(struct module *mod, mod = rec->arch.mod; return __ftrace_make_nop(mod, rec, addr); -#else - /* We should not get here without modules */ - return -EINVAL; -#endif /* CONFIG_MODULES */ + } -#ifdef CONFIG_MODULES #ifdef CONFIG_PPC64 static int __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) @@ -380,7 +391,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) * b +8; ld r2,40(r1) */ if (((op[0] != 0x48000008) || (op[1] != 0xe8410028)) && - ((op[0] != PPC_INST_NOP) || (op[1] != PPC_INST_NOP))) { + ((op[0] != PPC_NOP_INSTR) || (op[1] != PPC_NOP_INSTR))) { printk(KERN_ERR "Expected NOPs but have %x %x\n", op[0], op[1]); return -EINVAL; } @@ -402,7 +413,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) /* ld r2,40(r1) */ op[1] = 0xe8410028; - pr_debug("write to %lx\n", rec->ip); + DEBUGP("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2)) return -EPERM; @@ -423,7 +434,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return -EFAULT; /* It should be pointing to a nop */ - if (op != PPC_INST_NOP) { + if (op != PPC_NOP_INSTR) { printk(KERN_ERR "Expected NOP but have %x\n", op); return -EINVAL; } @@ -442,7 +453,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return -EINVAL; } - pr_debug("write to %lx\n", rec->ip); + DEBUGP("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) return -EPERM; @@ -452,12 +463,11 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return 0; } #endif /* CONFIG_PPC64 */ -#endif /* CONFIG_MODULES */ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { + unsigned char *old, *new; unsigned long ip = rec->ip; - unsigned int old, new; /* * If the calling address is more that 24 bits away, @@ -467,11 +477,10 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) if (test_24bit_addr(ip, addr)) { /* within range */ old = ftrace_nop_replace(); - new = ftrace_call_replace(ip, addr, 1); + new = ftrace_call_replace(ip, addr); return ftrace_modify_code(ip, old, new); } -#ifdef CONFIG_MODULES /* * Out of range jumps are called from modules. * Being that we are converting from nop, it had better @@ -483,20 +492,16 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) } return __ftrace_make_call(rec, addr); -#else - /* We should not get here without modules */ - return -EINVAL; -#endif /* CONFIG_MODULES */ } int ftrace_update_ftrace_func(ftrace_func_t func) { unsigned long ip = (unsigned long)(&ftrace_call); - unsigned int old, new; + unsigned char old[MCOUNT_INSN_SIZE], *new; int ret; - old = *(unsigned int *)&ftrace_call; - new = ftrace_call_replace(ip, (unsigned long)func, 1); + memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE); + new = ftrace_call_replace(ip, (unsigned long)func); ret = ftrace_modify_code(ip, old, new); return ret; @@ -511,115 +516,3 @@ int __init ftrace_dyn_arch_init(void *data) return 0; } -#endif /* CONFIG_DYNAMIC_FTRACE */ - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - -#ifdef CONFIG_DYNAMIC_FTRACE -extern void ftrace_graph_call(void); -extern void ftrace_graph_stub(void); - -int ftrace_enable_ftrace_graph_caller(void) -{ - unsigned long ip = (unsigned long)(&ftrace_graph_call); - unsigned long addr = (unsigned long)(&ftrace_graph_caller); - unsigned long stub = (unsigned long)(&ftrace_graph_stub); - unsigned int old, new; - - old = ftrace_call_replace(ip, stub, 0); - new = ftrace_call_replace(ip, addr, 0); - - return ftrace_modify_code(ip, old, new); -} - -int ftrace_disable_ftrace_graph_caller(void) -{ - unsigned long ip = (unsigned long)(&ftrace_graph_call); - unsigned long addr = (unsigned long)(&ftrace_graph_caller); - unsigned long stub = (unsigned long)(&ftrace_graph_stub); - unsigned int old, new; - - old = ftrace_call_replace(ip, addr, 0); - new = ftrace_call_replace(ip, stub, 0); - - return ftrace_modify_code(ip, old, new); -} -#endif /* CONFIG_DYNAMIC_FTRACE */ - -#ifdef CONFIG_PPC64 -extern void mod_return_to_handler(void); -#endif - -/* - * Hook the return address and push it in the stack of return addrs - * in current thread info. - */ -void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) -{ - unsigned long old; - unsigned long long calltime; - int faulted; - struct ftrace_graph_ent trace; - unsigned long return_hooker = (unsigned long)&return_to_handler; - - if (unlikely(atomic_read(¤t->tracing_graph_pause))) - return; - -#if CONFIG_PPC64 - /* non core kernel code needs to save and restore the TOC */ - if (REGION_ID(self_addr) != KERNEL_REGION_ID) - return_hooker = (unsigned long)&mod_return_to_handler; -#endif - - return_hooker = GET_ADDR(return_hooker); - - /* - * Protect against fault, even if it shouldn't - * happen. This tool is too much intrusive to - * ignore such a protection. - */ - asm volatile( - "1: " PPC_LL "%[old], 0(%[parent])\n" - "2: " PPC_STL "%[return_hooker], 0(%[parent])\n" - " li %[faulted], 0\n" - "3:\n" - - ".section .fixup, \"ax\"\n" - "4: li %[faulted], 1\n" - " b 3b\n" - ".previous\n" - - ".section __ex_table,\"a\"\n" - PPC_LONG_ALIGN "\n" - PPC_LONG "1b,4b\n" - PPC_LONG "2b,4b\n" - ".previous" - - : [old] "=r" (old), [faulted] "=r" (faulted) - : [parent] "r" (parent), [return_hooker] "r" (return_hooker) - : "memory" - ); - - if (unlikely(faulted)) { - ftrace_graph_stop(); - WARN_ON(1); - return; - } - - calltime = cpu_clock(raw_smp_processor_id()); - - if (ftrace_push_return_trace(old, calltime, - self_addr, &trace.depth) == -EBUSY) { - *parent = old; - return; - } - - trace.func = self_addr; - - /* Only trace if the calling function expects to */ - if (!ftrace_graph_entry(&trace)) { - current->curr_ret_stack--; - *parent = old; - } -} -#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/trunk/arch/powerpc/kernel/head_booke.h b/trunk/arch/powerpc/kernel/head_booke.h index 95f39f1e68d4..fce2df988504 100644 --- a/trunk/arch/powerpc/kernel/head_booke.h +++ b/trunk/arch/powerpc/kernel/head_booke.h @@ -10,15 +10,6 @@ mtspr SPRN_IVOR##vector_number,r26; \ sync -#if (THREAD_SHIFT < 15) -#define ALLOC_STACK_FRAME(reg, val) \ - addi reg,reg,val -#else -#define ALLOC_STACK_FRAME(reg, val) \ - addis reg,reg,val@ha; \ - addi reg,reg,val@l -#endif - #define NORMAL_EXCEPTION_PROLOG \ mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ mtspr SPRN_SPRG1,r11; \ @@ -29,7 +20,7 @@ beq 1f; \ mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ - ALLOC_STACK_FRAME(r1, THREAD_SIZE); \ + addi r1,r1,THREAD_SIZE; \ 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ mr r11,r1; \ stw r10,_CCR(r11); /* save various registers */\ @@ -79,10 +70,10 @@ /* only on e500mc/e200 */ #define DEBUG_STACK_BASE dbgirq_ctx -#ifdef CONFIG_E200 -#define DEBUG_SPRG SPRN_SPRG6W -#else +#ifdef CONFIG_PPC_E500MC #define DEBUG_SPRG SPRN_SPRG9 +#else +#define DEBUG_SPRG SPRN_SPRG6W #endif #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE) @@ -288,7 +279,7 @@ lwz r11,GPR11(r8); \ mfspr r8,DEBUG_SPRG; \ \ - PPC_RFDI; \ + RFDI; \ b .; \ \ /* continue normal handling for a debug exception... */ \ diff --git a/trunk/arch/powerpc/kernel/head_fsl_booke.S b/trunk/arch/powerpc/kernel/head_fsl_booke.S index 4c22620d009b..36ffb3504a4f 100644 --- a/trunk/arch/powerpc/kernel/head_fsl_booke.S +++ b/trunk/arch/powerpc/kernel/head_fsl_booke.S @@ -103,15 +103,10 @@ invstr: mflr r6 /* Make it accessible */ or r7,r7,r4 mtspr SPRN_MAS6,r7 tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */ +#ifndef CONFIG_E200 mfspr r7,SPRN_MAS1 andis. r7,r7,MAS1_VALID@h bne match_TLB - - mfspr r7,SPRN_MMUCFG - rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ - cmpwi r7,3 - bne match_TLB /* skip if NPIDS != 3 */ - mfspr r7,SPRN_PID1 slwi r7,r7,16 or r7,r7,r4 @@ -125,7 +120,7 @@ invstr: mflr r6 /* Make it accessible */ or r7,r7,r4 mtspr SPRN_MAS6,r7 tlbsx 0,r6 /* Fall through, we had to match */ - +#endif match_TLB: mfspr r7,SPRN_MAS0 rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */ @@ -173,7 +168,7 @@ skpinv: addi r6,r6,1 /* Increment */ /* grab and fixup the RPN */ mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */ - rlwinm r6,r6,25,27,31 + rlwinm r6,r6,25,27,30 li r8,-1 addi r6,r6,10 slw r6,r8,r6 /* convert to mask */ @@ -199,7 +194,7 @@ skpinv: addi r6,r6,1 /* Increment */ xori r6,r4,1 /* Setup TMP mapping in the other Address space */ slwi r6,r6,12 oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l + ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r6 mfspr r6,SPRN_MAS2 li r7,0 /* temp EPN = 0 */ @@ -220,19 +215,14 @@ skpinv: addi r6,r6,1 /* Increment */ /* 4. Clear out PIDs & Search info */ li r6,0 - mtspr SPRN_MAS6,r6 mtspr SPRN_PID0,r6 - - mfspr r7,SPRN_MMUCFG - rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ - cmpwi r7,3 - bne 2f /* skip if NPIDS != 3 */ - +#ifndef CONFIG_E200 mtspr SPRN_PID1,r6 mtspr SPRN_PID2,r6 +#endif + mtspr SPRN_MAS6,r6 /* 5. Invalidate mapping we started in */ -2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 @@ -257,10 +247,10 @@ skpinv: addi r6,r6,1 /* Increment */ lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ mtspr SPRN_MAS0,r6 lis r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l + ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l mtspr SPRN_MAS1,r6 - lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h - ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l + lis r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@h + ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@l mtspr SPRN_MAS2,r6 mtspr SPRN_MAS3,r8 tlbwe @@ -308,14 +298,26 @@ skpinv: addi r6,r6,1 /* Increment */ SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError); SET_IVOR(14, InstructionTLBError); + SET_IVOR(15, DebugDebug); +#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC) SET_IVOR(15, DebugCrit); +#endif + SET_IVOR(32, SPEUnavailable); + SET_IVOR(33, SPEFloatingPointData); + SET_IVOR(34, SPEFloatingPointRound); +#ifndef CONFIG_E200 + SET_IVOR(35, PerformanceMonitor); +#endif +#ifdef CONFIG_PPC_E500MC + SET_IVOR(36, Doorbell); +#endif /* Establish the interrupt vector base */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ mtspr SPRN_IVPR,r4 /* Setup the defaults for TLB entries */ - li r2,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l + li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l #ifdef CONFIG_E200 oris r2,r2,MAS4_TLBSELD(1)@h #endif @@ -327,6 +329,12 @@ skpinv: addi r6,r6,1 /* Increment */ oris r2,r2,HID0_DOZE@h mtspr SPRN_HID0, r2 #endif +#ifdef CONFIG_E200 + /* enable dedicated debug exception handling resources (Debug APU) */ + mfspr r2,SPRN_HID0 + ori r2,r2,HID0_DAPUEN@l + mtspr SPRN_HID0,r2 +#endif #if !defined(CONFIG_BDI_SWITCH) /* @@ -698,13 +706,15 @@ interrupt_base: /* Performance Monitor */ EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) - EXCEPTION(0x2070, Doorbell, doorbell_exception, EXC_XFER_STD) - - CRITICAL_EXCEPTION(0x2080, CriticalDoorbell, unknown_exception) +#ifdef CONFIG_PPC_E500MC + EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD) +#endif /* Debug Interrupt */ DEBUG_DEBUG_EXCEPTION +#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC) DEBUG_CRIT_EXCEPTION +#endif /* * Local functions @@ -887,47 +897,6 @@ KernelSPE: * Global functions */ -/* Adjust or setup IVORs for e200 */ -_GLOBAL(__setup_e200_ivors) - li r3,DebugDebug@l - mtspr SPRN_IVOR15,r3 - li r3,SPEUnavailable@l - mtspr SPRN_IVOR32,r3 - li r3,SPEFloatingPointData@l - mtspr SPRN_IVOR33,r3 - li r3,SPEFloatingPointRound@l - mtspr SPRN_IVOR34,r3 - sync - blr - -/* Adjust or setup IVORs for e500v1/v2 */ -_GLOBAL(__setup_e500_ivors) - li r3,DebugCrit@l - mtspr SPRN_IVOR15,r3 - li r3,SPEUnavailable@l - mtspr SPRN_IVOR32,r3 - li r3,SPEFloatingPointData@l - mtspr SPRN_IVOR33,r3 - li r3,SPEFloatingPointRound@l - mtspr SPRN_IVOR34,r3 - li r3,PerformanceMonitor@l - mtspr SPRN_IVOR35,r3 - sync - blr - -/* Adjust or setup IVORs for e500mc */ -_GLOBAL(__setup_e500mc_ivors) - li r3,DebugDebug@l - mtspr SPRN_IVOR15,r3 - li r3,PerformanceMonitor@l - mtspr SPRN_IVOR35,r3 - li r3,Doorbell@l - mtspr SPRN_IVOR36,r3 - li r3,CriticalDoorbell@l - mtspr SPRN_IVOR37,r3 - sync - blr - /* * extern void loadcam_entry(unsigned int index) * @@ -1120,7 +1089,7 @@ __secondary_start: mtspr SPRN_SPRG3,r4 /* Setup the defaults for TLB entries */ - li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l + li r4,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS4,r4 /* Jump to start_secondary */ diff --git a/trunk/arch/powerpc/kernel/module_64.c b/trunk/arch/powerpc/kernel/module_64.c index 8fbb12508bf3..8992b031a7b6 100644 --- a/trunk/arch/powerpc/kernel/module_64.c +++ b/trunk/arch/powerpc/kernel/module_64.c @@ -329,7 +329,7 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, restore r2. */ static int restore_r2(u32 *instruction, struct module *me) { - if (*instruction != PPC_INST_NOP) { + if (*instruction != PPC_NOP_INSTR) { printk("%s: Expect noop after relocate, got %08x\n", me->name, *instruction); return 0; diff --git a/trunk/arch/powerpc/kernel/pci-common.c b/trunk/arch/powerpc/kernel/pci-common.c index 2ad17315fc88..19b12d2cbb4b 100644 --- a/trunk/arch/powerpc/kernel/pci-common.c +++ b/trunk/arch/powerpc/kernel/pci-common.c @@ -38,7 +38,6 @@ #include static DEFINE_SPINLOCK(hose_spinlock); -LIST_HEAD(hose_list); /* XXX kill that some day ... */ static int global_phb_number; /* Global phb counter */ @@ -114,24 +113,19 @@ void pcibios_free_controller(struct pci_controller *phb) kfree(phb); } -static resource_size_t pcibios_io_size(const struct pci_controller *hose) -{ -#ifdef CONFIG_PPC64 - return hose->pci_io_size; -#else - return hose->io_resource.end - hose->io_resource.start + 1; -#endif -} - int pcibios_vaddr_is_ioport(void __iomem *address) { int ret = 0; struct pci_controller *hose; - resource_size_t size; + unsigned long size; spin_lock(&hose_spinlock); list_for_each_entry(hose, &hose_list, list_node) { - size = pcibios_io_size(hose); +#ifdef CONFIG_PPC64 + size = hose->pci_io_size; +#else + size = hose->io_resource.end - hose->io_resource.start + 1; +#endif if (address >= hose->io_base_virt && address < (hose->io_base_virt + size)) { ret = 1; @@ -142,29 +136,6 @@ int pcibios_vaddr_is_ioport(void __iomem *address) return ret; } -unsigned long pci_address_to_pio(phys_addr_t address) -{ - struct pci_controller *hose; - resource_size_t size; - unsigned long ret = ~0; - - spin_lock(&hose_spinlock); - list_for_each_entry(hose, &hose_list, list_node) { - size = pcibios_io_size(hose); - if (address >= hose->io_base_phys && - address < (hose->io_base_phys + size)) { - unsigned long base = - (unsigned long)hose->io_base_virt - _IO_BASE; - ret = base + (address - hose->io_base_phys); - break; - } - } - spin_unlock(&hose_spinlock); - - return ret; -} -EXPORT_SYMBOL_GPL(pci_address_to_pio); - /* * Return the domain number for this bus. */ @@ -590,21 +561,8 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus, (unsigned long long)(offset + size - 1)); if (mmap_state == pci_mmap_mem) { - /* Hack alert ! - * - * Because X is lame and can fail starting if it gets an error trying - * to mmap legacy_mem (instead of just moving on without legacy memory - * access) we fake it here by giving it anonymous memory, effectively - * behaving just like /dev/zero - */ - if ((offset + size) > hose->isa_mem_size) { - printk(KERN_DEBUG - "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n", - current->comm, current->pid, pci_domain_nr(bus), bus->number); - if (vma->vm_flags & VM_SHARED) - return shmem_zero_setup(vma); - return 0; - } + if ((offset + size) > hose->isa_mem_size) + return -ENXIO; offset += hose->isa_mem_phys; } else { unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; diff --git a/trunk/arch/powerpc/kernel/pci_32.c b/trunk/arch/powerpc/kernel/pci_32.c index d473634e39e3..132cd80afa21 100644 --- a/trunk/arch/powerpc/kernel/pci_32.c +++ b/trunk/arch/powerpc/kernel/pci_32.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -44,6 +43,8 @@ static u8* pci_to_OF_bus_map; */ static int pci_assign_all_buses; +LIST_HEAD(hose_list); + static int pci_bus_count; /* This will remain NULL for now, until isa-bridge.c is made common @@ -218,23 +219,16 @@ scan_OF_pci_childs(struct device_node *parent, pci_OF_scan_iterator filter, void static struct device_node *scan_OF_for_pci_dev(struct device_node *parent, unsigned int devfn) { - struct device_node *np, *cnp; + struct device_node *np; const u32 *reg; unsigned int psize; for_each_child_of_node(parent, np) { reg = of_get_property(np, "reg", &psize); - if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn) + if (reg == NULL || psize < 4) + continue; + if (((reg[0] >> 8) & 0xff) == devfn) return np; - - /* Note: some OFs create a parent node "multifunc-device" as - * a fake root for all functions of a multi-function device, - * we go down them as well. */ - if (!strcmp(np->name, "multifunc-device")) { - cnp = scan_OF_for_pci_dev(np, devfn); - if (cnp) - return cnp; - } } return NULL; } @@ -497,6 +491,24 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) return result; } +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + unsigned int size = hose->io_resource.end - + hose->io_resource.start + 1; + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + return base + (address - hose->io_base_phys); + } + } + return (unsigned int)-1; +} +EXPORT_SYMBOL(pci_address_to_pio); + /* * Null PCI config access functions, for the case when we can't * find a hose. diff --git a/trunk/arch/powerpc/kernel/pci_64.c b/trunk/arch/powerpc/kernel/pci_64.c index be574fc0d92f..ea8eda8c87cf 100644 --- a/trunk/arch/powerpc/kernel/pci_64.c +++ b/trunk/arch/powerpc/kernel/pci_64.c @@ -43,6 +43,8 @@ unsigned long pci_probe_only = 1; unsigned long pci_io_base = ISA_IO_BASE; EXPORT_SYMBOL(pci_io_base); +LIST_HEAD(hose_list); + static void fixup_broken_pcnet32(struct pci_dev* dev) { if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { @@ -522,6 +524,23 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_map_io_space); +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + hose->pci_io_size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + return base + (address - hose->io_base_phys); + } + } + return (unsigned int)-1; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + + #define IOBASE_BRIDGE_NUMBER 0 #define IOBASE_MEMORY 1 #define IOBASE_IO 2 diff --git a/trunk/arch/powerpc/kernel/process.c b/trunk/arch/powerpc/kernel/process.c index eac064948780..fb7049c054c0 100644 --- a/trunk/arch/powerpc/kernel/process.c +++ b/trunk/arch/powerpc/kernel/process.c @@ -33,10 +33,7 @@ #include #include #include -#include #include -#include -#include #include #include @@ -1011,14 +1008,6 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) unsigned long sp, ip, lr, newsp; int count = 0; int firstframe = 1; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - int curr_frame = current->curr_ret_stack; - extern void return_to_handler(void); - unsigned long addr = (unsigned long)return_to_handler; -#ifdef CONFIG_PPC64 - addr = *(unsigned long*)addr; -#endif -#endif sp = (unsigned long) stack; if (tsk == NULL) @@ -1041,13 +1030,6 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) ip = stack[STACK_FRAME_LR_SAVE]; if (!firstframe || ip != lr) { printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip); -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - if (ip == addr && curr_frame >= 0) { - printk(" (%pS)", - (void *)current->ret_stack[curr_frame].ret); - curr_frame--; - } -#endif if (firstframe) printk(" (unreliable)"); printk("\n"); @@ -1140,43 +1122,3 @@ void thread_info_cache_init(void) } #endif /* THREAD_SHIFT < PAGE_SHIFT */ - -unsigned long arch_align_stack(unsigned long sp) -{ - if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) - sp -= get_random_int() & ~PAGE_MASK; - return sp & ~0xf; -} - -static inline unsigned long brk_rnd(void) -{ - unsigned long rnd = 0; - - /* 8MB for 32bit, 1GB for 64bit */ - if (is_32bit_task()) - rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT))); - else - rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT))); - - return rnd << PAGE_SHIFT; -} - -unsigned long arch_randomize_brk(struct mm_struct *mm) -{ - unsigned long ret = PAGE_ALIGN(mm->brk + brk_rnd()); - - if (ret < mm->brk) - return mm->brk; - - return ret; -} - -unsigned long randomize_et_dyn(unsigned long base) -{ - unsigned long ret = PAGE_ALIGN(base + brk_rnd()); - - if (ret < base) - return base; - - return ret; -} diff --git a/trunk/arch/powerpc/kernel/prom.c b/trunk/arch/powerpc/kernel/prom.c index 5ec6a9e23933..f00f83109ab3 100644 --- a/trunk/arch/powerpc/kernel/prom.c +++ b/trunk/arch/powerpc/kernel/prom.c @@ -1075,6 +1075,11 @@ static void __init early_reserve_mem(void) DBG("reserving: %llx -> %llx\n", base, size); lmb_reserve(base, size); } + +#if 0 + DBG("memory reserved, lmbs :\n"); + lmb_dump_all(); +#endif } #ifdef CONFIG_PHYP_DUMP @@ -1216,7 +1221,6 @@ void __init early_init_devtree(void *params) lmb_enforce_memory_limit(limit); lmb_analyze(); - lmb_dump_all(); DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); diff --git a/trunk/arch/powerpc/kernel/rtas.c b/trunk/arch/powerpc/kernel/rtas.c index ee4c7609b649..fdfe14c4bdef 100644 --- a/trunk/arch/powerpc/kernel/rtas.c +++ b/trunk/arch/powerpc/kernel/rtas.c @@ -46,7 +46,6 @@ EXPORT_SYMBOL(rtas); struct rtas_suspend_me_data { atomic_t working; /* number of cpus accessing this struct */ - atomic_t done; int token; /* ibm,suspend-me */ int error; struct completion *complete; /* wait on this until working == 0 */ @@ -690,7 +689,7 @@ static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE; #ifdef CONFIG_PPC_PSERIES static void rtas_percpu_suspend_me(void *info) { - long rc = H_SUCCESS; + long rc; unsigned long msr_save; int cpu; struct rtas_suspend_me_data *data = @@ -702,8 +701,7 @@ static void rtas_percpu_suspend_me(void *info) msr_save = mfmsr(); mtmsr(msr_save & ~(MSR_EE)); - while (rc == H_SUCCESS && !atomic_read(&data->done)) - rc = plpar_hcall_norets(H_JOIN); + rc = plpar_hcall_norets(H_JOIN); mtmsr(msr_save); @@ -726,9 +724,6 @@ static void rtas_percpu_suspend_me(void *info) smp_processor_id(), rc); data->error = rc; } - - atomic_set(&data->done, 1); - /* This cpu did the suspend or got an error; in either case, * we need to prod all other other cpus out of join state. * Extra prods are harmless. @@ -771,7 +766,6 @@ static int rtas_ibm_suspend_me(struct rtas_args *args) } atomic_set(&data.working, 0); - atomic_set(&data.done, 0); data.token = rtas_token("ibm,suspend-me"); data.error = 0; data.complete = &done; diff --git a/trunk/arch/powerpc/kernel/setup_64.c b/trunk/arch/powerpc/kernel/setup_64.c index 73e16e298e28..2d34196bba8c 100644 --- a/trunk/arch/powerpc/kernel/setup_64.c +++ b/trunk/arch/powerpc/kernel/setup_64.c @@ -578,6 +578,13 @@ void ppc64_boot_msg(unsigned int src, const char *msg) printk("[boot]%04x %s\n", src, msg); } +/* Print a termination message (print only -- does not stop the kernel) */ +void ppc64_terminate_msg(unsigned int src, const char *msg) +{ + ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg); + printk("[terminate]%04x %s\n", src, msg); +} + void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/trunk/arch/powerpc/kernel/signal.h b/trunk/arch/powerpc/kernel/signal.h index f1442d69d4ec..b427bf8e1d8f 100644 --- a/trunk/arch/powerpc/kernel/signal.h +++ b/trunk/arch/powerpc/kernel/signal.h @@ -39,12 +39,22 @@ extern unsigned long copy_vsx_from_user(struct task_struct *task, #ifdef CONFIG_PPC64 +static inline int is_32bit_task(void) +{ + return test_thread_flag(TIF_32BIT); +} + extern int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs); #else /* CONFIG_PPC64 */ +static inline int is_32bit_task(void) +{ + return 1; +} + static inline int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs) diff --git a/trunk/arch/powerpc/kernel/traps.c b/trunk/arch/powerpc/kernel/traps.c index 678fbff0d206..5457e9575685 100644 --- a/trunk/arch/powerpc/kernel/traps.c +++ b/trunk/arch/powerpc/kernel/traps.c @@ -52,10 +52,6 @@ #include #endif #include -#include -#ifdef CONFIG_FSL_BOOKE -#include -#endif #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) int (*__debugger)(struct pt_regs *regs); @@ -641,6 +637,29 @@ static void parse_fpe(struct pt_regs *regs) * bits is faster and easier. * */ +#define INST_MFSPR_PVR 0x7c1f42a6 +#define INST_MFSPR_PVR_MASK 0xfc1fffff + +#define INST_DCBA 0x7c0005ec +#define INST_DCBA_MASK 0xfc0007fe + +#define INST_MCRXR 0x7c000400 +#define INST_MCRXR_MASK 0xfc0007fe + +#define INST_STRING 0x7c00042a +#define INST_STRING_MASK 0xfc0007fe +#define INST_STRING_GEN_MASK 0xfc00067e +#define INST_LSWI 0x7c0004aa +#define INST_LSWX 0x7c00042a +#define INST_STSWI 0x7c0005aa +#define INST_STSWX 0x7c00052a + +#define INST_POPCNTB 0x7c0000f4 +#define INST_POPCNTB_MASK 0xfc0007fe + +#define INST_ISEL 0x7c00001e +#define INST_ISEL_MASK 0xfc00003e + static int emulate_string_inst(struct pt_regs *regs, u32 instword) { u8 rT = (instword >> 21) & 0x1f; @@ -651,20 +670,20 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) int pos = 0; /* Early out if we are an invalid form of lswx */ - if ((instword & PPC_INST_STRING_MASK) == PPC_INST_LSWX) + if ((instword & INST_STRING_MASK) == INST_LSWX) if ((rT == rA) || (rT == NB_RB)) return -EINVAL; EA = (rA == 0) ? 0 : regs->gpr[rA]; - switch (instword & PPC_INST_STRING_MASK) { - case PPC_INST_LSWX: - case PPC_INST_STSWX: + switch (instword & INST_STRING_MASK) { + case INST_LSWX: + case INST_STSWX: EA += NB_RB; num_bytes = regs->xer & 0x7f; break; - case PPC_INST_LSWI: - case PPC_INST_STSWI: + case INST_LSWI: + case INST_STSWI: num_bytes = (NB_RB == 0) ? 32 : NB_RB; break; default: @@ -676,9 +695,9 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) u8 val; u32 shift = 8 * (3 - (pos & 0x3)); - switch ((instword & PPC_INST_STRING_MASK)) { - case PPC_INST_LSWX: - case PPC_INST_LSWI: + switch ((instword & INST_STRING_MASK)) { + case INST_LSWX: + case INST_LSWI: if (get_user(val, (u8 __user *)EA)) return -EFAULT; /* first time updating this reg, @@ -687,8 +706,8 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) regs->gpr[rT] = 0; regs->gpr[rT] |= val << shift; break; - case PPC_INST_STSWI: - case PPC_INST_STSWX: + case INST_STSWI: + case INST_STSWX: val = regs->gpr[rT] >> shift; if (put_user(val, (u8 __user *)EA)) return -EFAULT; @@ -756,18 +775,18 @@ static int emulate_instruction(struct pt_regs *regs) return -EFAULT; /* Emulate the mfspr rD, PVR. */ - if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) { + if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) { rd = (instword >> 21) & 0x1f; regs->gpr[rd] = mfspr(SPRN_PVR); return 0; } /* Emulating the dcba insn is just a no-op. */ - if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) + if ((instword & INST_DCBA_MASK) == INST_DCBA) return 0; /* Emulate the mcrxr insn. */ - if ((instword & PPC_INST_MCRXR_MASK) == PPC_INST_MCRXR) { + if ((instword & INST_MCRXR_MASK) == INST_MCRXR) { int shift = (instword >> 21) & 0x1c; unsigned long msk = 0xf0000000UL >> shift; @@ -777,16 +796,16 @@ static int emulate_instruction(struct pt_regs *regs) } /* Emulate load/store string insn. */ - if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) + if ((instword & INST_STRING_GEN_MASK) == INST_STRING) return emulate_string_inst(regs, instword); /* Emulate the popcntb (Population Count Bytes) instruction. */ - if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) { + if ((instword & INST_POPCNTB_MASK) == INST_POPCNTB) { return emulate_popcntb_inst(regs, instword); } /* Emulate isel (Integer Select) instruction */ - if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) { + if ((instword & INST_ISEL_MASK) == INST_ISEL) { return emulate_isel(regs, instword); } @@ -1125,24 +1144,6 @@ void vsx_assist_exception(struct pt_regs *regs) #endif /* CONFIG_VSX */ #ifdef CONFIG_FSL_BOOKE - -void doorbell_exception(struct pt_regs *regs) -{ -#ifdef CONFIG_SMP - int cpu = smp_processor_id(); - int msg; - - if (num_online_cpus() < 2) - return; - - for (msg = 0; msg < 4; msg++) - if (test_and_clear_bit(msg, &dbell_smp_message[cpu])) - smp_message_recv(msg); -#else - printk(KERN_WARNING "Received doorbell on non-smp system\n"); -#endif -} - void CacheLockingException(struct pt_regs *regs, unsigned long address, unsigned long error_code) { diff --git a/trunk/arch/powerpc/kernel/vmlinux.lds.S b/trunk/arch/powerpc/kernel/vmlinux.lds.S index 895af44bf1f4..161b9b9691f0 100644 --- a/trunk/arch/powerpc/kernel/vmlinux.lds.S +++ b/trunk/arch/powerpc/kernel/vmlinux.lds.S @@ -58,7 +58,6 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT - IRQENTRY_TEXT #ifdef CONFIG_PPC32 *(.got1) diff --git a/trunk/arch/powerpc/kvm/powerpc.c b/trunk/arch/powerpc/kvm/powerpc.c index 5f81256287f5..2822c8ccfaaf 100644 --- a/trunk/arch/powerpc/kvm/powerpc.c +++ b/trunk/arch/powerpc/kvm/powerpc.c @@ -125,10 +125,6 @@ static void kvmppc_free_vcpus(struct kvm *kvm) } } -void kvm_arch_sync_events(struct kvm *kvm) -{ -} - void kvm_arch_destroy_vm(struct kvm *kvm) { kvmppc_free_vcpus(kvm); diff --git a/trunk/arch/powerpc/lib/dma-noncoherent.c b/trunk/arch/powerpc/lib/dma-noncoherent.c index 005a28d380af..b7dc4c19f582 100644 --- a/trunk/arch/powerpc/lib/dma-noncoherent.c +++ b/trunk/arch/powerpc/lib/dma-noncoherent.c @@ -29,10 +29,120 @@ #include #include #include -#include #include +/* + * This address range defaults to a value that is safe for all + * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It + * can be further configured for specific applications under + * the "Advanced Setup" menu. -Matt + */ +#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) +#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) + +/* + * This is the page table (2MB) covering uncached, DMA consistent allocations + */ +static pte_t *consistent_pte; +static DEFINE_SPINLOCK(consistent_lock); + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vm_region region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vm_region_alloc with an appropriate + * struct vm_region head (eg): + * + * struct vm_region vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vm_region_alloc(). + */ +struct ppc_vm_region { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +static struct ppc_vm_region consistent_head = { + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + +static struct ppc_vm_region * +ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct ppc_vm_region *c, *new; + + new = kmalloc(sizeof(struct ppc_vm_region), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&consistent_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + + spin_unlock_irqrestore(&consistent_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&consistent_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr) +{ + struct ppc_vm_region *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + /* * Allocate DMA-coherent memory space and return both the kernel remapped * virtual and bus address for that space. @@ -41,21 +151,21 @@ void * __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) { struct page *page; + struct ppc_vm_region *c; unsigned long order; - int i; - unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT; - unsigned int array_size = nr_pages * sizeof(struct page *); - struct page **pages; - struct page *end; u64 mask = 0x00ffffff, limit; /* ISA default */ - struct vm_struct *area; - BUG_ON(!mem_init_done); + if (!consistent_pte) { + printk(KERN_ERR "%s: not initialised\n", __func__); + dump_stack(); + return NULL; + } + size = PAGE_ALIGN(size); limit = (mask + 1) & ~mask; - if (limit && size >= limit) { - printk(KERN_WARNING "coherent allocation too big (requested " - "%#x mask %#Lx)\n", size, mask); + if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { + printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", + size, mask); return NULL; } @@ -68,8 +178,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) if (!page) goto no_page; - end = page + (1 << order); - /* * Invalidate any data that might be lurking in the * kernel direct-mapped region for device DMA. @@ -80,59 +188,48 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) flush_dcache_range(kaddr, kaddr + size); } - split_page(page, order); - /* - * Set the "dma handle" + * Allocate a virtual address in the consistent mapping region. */ - *handle = page_to_phys(page); - - area = get_vm_area_caller(size, VM_IOREMAP, - __builtin_return_address(1)); - if (!area) - goto out_free_pages; - - if (array_size > PAGE_SIZE) { - pages = vmalloc(array_size); - area->flags |= VM_VPAGES; - } else { - pages = kmalloc(array_size, GFP_KERNEL); - } - if (!pages) - goto out_free_area; + c = ppc_vm_region_alloc(&consistent_head, size, + gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (c) { + unsigned long vaddr = c->vm_start; + pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); + struct page *end = page + (1 << order); - area->pages = pages; - area->nr_pages = nr_pages; + split_page(page, order); - for (i = 0; i < nr_pages; i++) - pages[i] = page + i; + /* + * Set the "dma handle" + */ + *handle = page_to_phys(page); - if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages)) - goto out_unmap; + do { + BUG_ON(!pte_none(*pte)); - /* - * Free the otherwise unused pages. - */ - page += nr_pages; - while (page < end) { - __free_page(page); - page++; + SetPageReserved(page); + set_pte_at(&init_mm, vaddr, + pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); + page++; + pte++; + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* + * Free the otherwise unused pages. + */ + while (page < end) { + __free_page(page); + page++; + } + + return (void *)c->vm_start; } - return area->addr; -out_unmap: - vunmap(area->addr); - if (array_size > PAGE_SIZE) - vfree(pages); - else - kfree(pages); - goto out_free_pages; -out_free_area: - free_vm_area(area); -out_free_pages: if (page) __free_pages(page, order); -no_page: + no_page: return NULL; } EXPORT_SYMBOL(__dma_alloc_coherent); @@ -142,11 +239,103 @@ EXPORT_SYMBOL(__dma_alloc_coherent); */ void __dma_free_coherent(size_t size, void *vaddr) { - vfree(vaddr); + struct ppc_vm_region *c; + unsigned long flags, addr; + pte_t *ptep; + + size = PAGE_ALIGN(size); + + spin_lock_irqsave(&consistent_lock, flags); + + c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr); + if (!c) + goto no_area; + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); + addr = c->vm_start; + do { + pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + unsigned long pfn; + + ptep++; + addr += PAGE_SIZE; + if (!pte_none(pte) && pte_present(pte)) { + pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + ClearPageReserved(page); + + __free_page(page); + continue; + } + } + + printk(KERN_CRIT "%s: bad page in kernel page table\n", + __func__); + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + list_del(&c->vm_list); + + spin_unlock_irqrestore(&consistent_lock, flags); + + kfree(c); + return; + + no_area: + spin_unlock_irqrestore(&consistent_lock, flags); + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, vaddr); + dump_stack(); } EXPORT_SYMBOL(__dma_free_coherent); +/* + * Initialise the consistent memory allocation. + */ +static int __init dma_alloc_init(void) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + int ret = 0; + + do { + pgd = pgd_offset(&init_mm, CONSISTENT_BASE); + pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE); + pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE); + if (!pmd) { + printk(KERN_ERR "%s: no pmd tables\n", __func__); + ret = -ENOMEM; + break; + } + + pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); + if (!pte) { + printk(KERN_ERR "%s: no pte tables\n", __func__); + ret = -ENOMEM; + break; + } + + consistent_pte = pte; + } while (0); + + return ret; +} + +core_initcall(dma_alloc_init); + /* * make an area consistent. */ diff --git a/trunk/arch/powerpc/lib/feature-fixups.c b/trunk/arch/powerpc/lib/feature-fixups.c index 7e8865bcd683..8c5a03be31e0 100644 --- a/trunk/arch/powerpc/lib/feature-fixups.c +++ b/trunk/arch/powerpc/lib/feature-fixups.c @@ -85,7 +85,7 @@ static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) } for (; dest < end; dest++) - patch_instruction(dest, PPC_INST_NOP); + patch_instruction(dest, PPC_NOP_INSTR); return 0; } @@ -122,7 +122,7 @@ void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end) for (; start < end; start++) { dest = (void *)start + *start; - patch_instruction(dest, PPC_INST_LWSYNC); + patch_instruction(dest, PPC_LWSYNC_INSTR); } } diff --git a/trunk/arch/powerpc/lib/sstep.c b/trunk/arch/powerpc/lib/sstep.c index 13b7d54f185b..4aae0c387645 100644 --- a/trunk/arch/powerpc/lib/sstep.c +++ b/trunk/arch/powerpc/lib/sstep.c @@ -172,8 +172,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) } break; case 0x378: /* orx */ - if (instr & 1) - break; rs = (instr >> 21) & 0x1f; rb = (instr >> 11) & 0x1f; if (rs == rb) { /* mr */ diff --git a/trunk/arch/powerpc/mm/fault.c b/trunk/arch/powerpc/mm/fault.c index 76993941cac9..91c7b8636b8a 100644 --- a/trunk/arch/powerpc/mm/fault.c +++ b/trunk/arch/powerpc/mm/fault.c @@ -253,33 +253,45 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, #endif /* CONFIG_8xx */ if (is_exec) { -#ifdef CONFIG_PPC_STD_MMU - /* Protection fault on exec go straight to failure on - * Hash based MMUs as they either don't support per-page - * execute permission, or if they do, it's handled already - * at the hash level. This test would probably have to - * be removed if we change the way this works to make hash - * processors use the same I/D cache coherency mechanism - * as embedded. - */ +#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) + /* protection fault */ if (error_code & DSISR_PROTFAULT) goto bad_area; -#endif /* CONFIG_PPC_STD_MMU */ - /* * Allow execution from readable areas if the MMU does not * provide separate controls over reading and executing. - * - * Note: That code used to not be enabled for 4xx/BookE. - * It is now as I/D cache coherency for these is done at - * set_pte_at() time and I see no reason why the test - * below wouldn't be valid on those processors. This -may- - * break programs compiled with a really old ABI though. */ if (!(vma->vm_flags & VM_EXEC) && (cpu_has_feature(CPU_FTR_NOEXECUTE) || !(vma->vm_flags & (VM_READ | VM_WRITE)))) goto bad_area; +#else + pte_t *ptep; + pmd_t *pmdp; + + /* Since 4xx/Book-E supports per-page execute permission, + * we lazily flush dcache to icache. */ + ptep = NULL; + if (get_pteptr(mm, address, &ptep, &pmdp)) { + spinlock_t *ptl = pte_lockptr(mm, pmdp); + spin_lock(ptl); + if (pte_present(*ptep)) { + struct page *page = pte_page(*ptep); + + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } + pte_update(ptep, 0, _PAGE_HWEXEC | + _PAGE_ACCESSED); + local_flush_tlb_page(vma, address); + pte_unmap_unlock(ptep, ptl); + up_read(&mm->mmap_sem); + return 0; + } + pte_unmap_unlock(ptep, ptl); + } +#endif /* a write */ } else if (is_write) { if (!(vma->vm_flags & VM_WRITE)) diff --git a/trunk/arch/powerpc/mm/fsl_booke_mmu.c b/trunk/arch/powerpc/mm/fsl_booke_mmu.c index 985b6c361ab4..1971e4ee3d6e 100644 --- a/trunk/arch/powerpc/mm/fsl_booke_mmu.c +++ b/trunk/arch/powerpc/mm/fsl_booke_mmu.c @@ -56,14 +56,10 @@ extern void loadcam_entry(unsigned int index); unsigned int tlbcam_index; -static unsigned long cam[CONFIG_LOWMEM_CAM_NUM]; +static unsigned long __cam0, __cam1, __cam2; #define NUM_TLBCAMS (16) -#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) -#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" -#endif - struct tlbcam TLBCAM[NUM_TLBCAMS]; struct tlbcamrange { @@ -77,7 +73,7 @@ extern unsigned int tlbcam_index; /* * Return PA for this VA if it is mapped by a CAM, or 0 */ -phys_addr_t v_mapped_by_tlbcam(unsigned long va) +unsigned long v_mapped_by_tlbcam(unsigned long va) { int b; for (b = 0; b < tlbcam_index; ++b) @@ -89,7 +85,7 @@ phys_addr_t v_mapped_by_tlbcam(unsigned long va) /* * Return VA for a given PA or 0 if not mapped */ -unsigned long p_mapped_by_tlbcam(phys_addr_t pa) +unsigned long p_mapped_by_tlbcam(unsigned long pa) { int b; for (b = 0; b < tlbcam_index; ++b) @@ -111,7 +107,7 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned int tsize, lz; asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); - tsize = 21 - lz; + tsize = (21 - lz) / 2; #ifdef CONFIG_SMP if ((flags & _PAGE_NO_CACHE) == 0) @@ -156,19 +152,19 @@ void invalidate_tlbcam_entry(int index) loadcam_entry(index); } -unsigned long __init mmu_mapin_ram(void) +void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, + unsigned long cam2) { - unsigned long virt = PAGE_OFFSET; - phys_addr_t phys = memstart_addr; - - while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) { - settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], _PAGE_KERNEL, 0); - virt += cam[tlbcam_index]; - phys += cam[tlbcam_index]; + settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0); + tlbcam_index++; + if (cam1) { tlbcam_index++; + settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0); + } + if (cam2) { + tlbcam_index++; + settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0); } - - return virt - PAGE_OFFSET; } /* @@ -179,46 +175,51 @@ void __init MMU_init_hw(void) flush_instruction_cache(); } +unsigned long __init mmu_mapin_ram(void) +{ + cam_mapin_ram(__cam0, __cam1, __cam2); + + return __cam0 + __cam1 + __cam2; +} + + void __init adjust_total_lowmem(void) { + phys_addr_t max_lowmem_size = __max_low_memory; + phys_addr_t cam_max_size = 0x10000000; phys_addr_t ram; - unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff; - char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf; - int i; - unsigned long virt = PAGE_OFFSET & 0xffffffffUL; - unsigned long phys = memstart_addr & 0xffffffffUL; - /* Convert (4^max) kB to (2^max) bytes */ - max_cam = max_cam * 2 + 10; + /* adjust CAM size to max_lowmem_size */ + if (max_lowmem_size < cam_max_size) + cam_max_size = max_lowmem_size; - /* adjust lowmem size to __max_low_memory */ - ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); + /* adjust lowmem size to max_lowmem_size */ + ram = min(max_lowmem_size, total_lowmem); /* Calculate CAM values */ - __max_low_memory = 0; - for (i = 0; ram && i < ARRAY_SIZE(cam); i++) { - unsigned int camsize = __ilog2(ram) & ~1U; - unsigned int align = __ffs(virt | phys) & ~1U; - - if (camsize > align) - camsize = align; - if (camsize > max_cam) - camsize = max_cam; - - cam[i] = 1UL << camsize; - ram -= cam[i]; - __max_low_memory += cam[i]; - virt += cam[i]; - phys += cam[i]; - - p += sprintf(p, "%lu/", cam[i] >> 20); + __cam0 = 1UL << 2 * (__ilog2(ram) / 2); + if (__cam0 > cam_max_size) + __cam0 = cam_max_size; + ram -= __cam0; + if (ram) { + __cam1 = 1UL << 2 * (__ilog2(ram) / 2); + if (__cam1 > cam_max_size) + __cam1 = cam_max_size; + ram -= __cam1; + } + if (ram) { + __cam2 = 1UL << 2 * (__ilog2(ram) / 2); + if (__cam2 > cam_max_size) + __cam2 = cam_max_size; + ram -= __cam2; } - for (; i < ARRAY_SIZE(cam); i++) - p += sprintf(p, "0/"); - p[-1] = '\0'; - pr_info("Memory CAM mapping: %s Mb, residual: %dMb\n", buf, - (unsigned int)((total_lowmem - __max_low_memory) >> 20)); + printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb," + " CAM2=%ldMb residual: %ldMb\n", + __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, + (long int)((total_lowmem - __cam0 - __cam1 - __cam2) + >> 20)); + __max_low_memory = __cam0 + __cam1 + __cam2; __initial_memory_limit_addr = memstart_addr + __max_low_memory; } diff --git a/trunk/arch/powerpc/mm/hash_low_32.S b/trunk/arch/powerpc/mm/hash_low_32.S index 14af8cedab70..67850ec9feb3 100644 --- a/trunk/arch/powerpc/mm/hash_low_32.S +++ b/trunk/arch/powerpc/mm/hash_low_32.S @@ -320,7 +320,7 @@ _GLOBAL(create_hpte) and r8,r8,r0 /* writable if _RW & _DIRTY */ rlwimi r5,r5,32-1,30,30 /* _PAGE_USER -> PP msb */ rlwimi r5,r5,32-2,31,31 /* _PAGE_USER -> PP lsb */ - ori r8,r8,0xe04 /* clear out reserved bits */ + ori r8,r8,0xe14 /* clear out reserved bits and M */ andc r8,r5,r8 /* PP = user? (rw&dirty? 2: 3): 0 */ BEGIN_FTR_SECTION rlwinm r8,r8,0,~_PAGE_COHERENT /* clear M (coherence not required) */ diff --git a/trunk/arch/powerpc/mm/hash_utils_64.c b/trunk/arch/powerpc/mm/hash_utils_64.c index f5bc1b213f24..8d5b4758c13a 100644 --- a/trunk/arch/powerpc/mm/hash_utils_64.c +++ b/trunk/arch/powerpc/mm/hash_utils_64.c @@ -516,7 +516,7 @@ static int __init htab_dt_scan_pftsize(unsigned long node, static unsigned long __init htab_get_table_size(void) { - unsigned long mem_size, rnd_mem_size, pteg_count, psize; + unsigned long mem_size, rnd_mem_size, pteg_count; /* If hash size isn't already provided by the platform, we try to * retrieve it from the device-tree. If it's not there neither, we @@ -534,8 +534,7 @@ static unsigned long __init htab_get_table_size(void) rnd_mem_size <<= 1; /* # pages / 2 */ - psize = mmu_psize_defs[mmu_virtual_psize].shift; - pteg_count = max(rnd_mem_size >> (psize + 1), 1UL << 11); + pteg_count = max(rnd_mem_size >> (12 + 1), 1UL << 11); return pteg_count << 7; } diff --git a/trunk/arch/powerpc/mm/mem.c b/trunk/arch/powerpc/mm/mem.c index f668fa9ba804..f00f09a77f12 100644 --- a/trunk/arch/powerpc/mm/mem.c +++ b/trunk/arch/powerpc/mm/mem.c @@ -472,7 +472,40 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, { #ifdef CONFIG_PPC_STD_MMU unsigned long access = 0, trap; +#endif + unsigned long pfn = pte_pfn(pte); + + /* handle i-cache coherency */ + if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) && + !cpu_has_feature(CPU_FTR_NOEXECUTE) && + pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); +#ifdef CONFIG_8xx + /* On 8xx, cache control instructions (particularly + * "dcbst" from flush_dcache_icache) fault as write + * operation if there is an unpopulated TLB entry + * for the address in question. To workaround that, + * we invalidate the TLB here, thus avoiding dcbst + * misbehaviour. + */ + _tlbil_va(address, 0 /* 8xx doesn't care about PID */); +#endif + /* The _PAGE_USER test should really be _PAGE_EXEC, but + * older glibc versions execute some code from no-exec + * pages, which for now we are supporting. If exec-only + * pages are ever implemented, this will have to change. + */ + if (!PageReserved(page) && (pte_val(pte) & _PAGE_USER) + && !test_bit(PG_arch_1, &page->flags)) { + if (vma->vm_mm == current->active_mm) { + __flush_dcache_icache((void *) address); + } else + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } + } +#ifdef CONFIG_PPC_STD_MMU /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ if (!pte_young(pte) || address >= TASK_SIZE) return; diff --git a/trunk/arch/powerpc/mm/mmap.c b/trunk/arch/powerpc/mm/mmap.c index 0d957a4c70fe..86010fc7d3b1 100644 --- a/trunk/arch/powerpc/mm/mmap.c +++ b/trunk/arch/powerpc/mm/mmap.c @@ -24,57 +24,16 @@ #include #include -#include #include /* * Top of mmap area (just below the process stack). * - * Leave at least a ~128 MB hole on 32bit applications. - * - * On 64bit applications we randomise the stack by 1GB so we need to - * space our mmap start address by a further 1GB, otherwise there is a - * chance the mmap area will end up closer to the stack than our ulimit - * requires. + * Leave an at least ~128 MB hole. */ -#define MIN_GAP32 (128*1024*1024) -#define MIN_GAP64 ((128 + 1024)*1024*1024UL) -#define MIN_GAP ((is_32bit_task()) ? MIN_GAP32 : MIN_GAP64) +#define MIN_GAP (128*1024*1024) #define MAX_GAP (TASK_SIZE/6*5) -static inline int mmap_is_legacy(void) -{ - if (current->personality & ADDR_COMPAT_LAYOUT) - return 1; - - if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY) - return 1; - - return sysctl_legacy_va_layout; -} - -/* - * Since get_random_int() returns the same value within a 1 jiffy window, - * we will almost always get the same randomisation for the stack and mmap - * region. This will mean the relative distance between stack and mmap will - * be the same. - * - * To avoid this we can shift the randomness by 1 bit. - */ -static unsigned long mmap_rnd(void) -{ - unsigned long rnd = 0; - - if (current->flags & PF_RANDOMIZE) { - /* 8MB for 32bit, 1GB for 64bit */ - if (is_32bit_task()) - rnd = (long)(get_random_int() % (1<<(22-PAGE_SHIFT))); - else - rnd = (long)(get_random_int() % (1<<(29-PAGE_SHIFT))); - } - return (rnd << PAGE_SHIFT) * 2; -} - static inline unsigned long mmap_base(void) { unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur; @@ -84,7 +43,24 @@ static inline unsigned long mmap_base(void) else if (gap > MAX_GAP) gap = MAX_GAP; - return PAGE_ALIGN(TASK_SIZE - gap - mmap_rnd()); + return TASK_SIZE - (gap & PAGE_MASK); +} + +static inline int mmap_is_legacy(void) +{ + /* + * Force standard allocation for 64 bit programs. + */ + if (!test_thread_flag(TIF_32BIT)) + return 1; + + if (current->personality & ADDR_COMPAT_LAYOUT) + return 1; + + if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY) + return 1; + + return sysctl_legacy_va_layout; } /* diff --git a/trunk/arch/powerpc/mm/numa.c b/trunk/arch/powerpc/mm/numa.c index 9047145095aa..7393bd76d698 100644 --- a/trunk/arch/powerpc/mm/numa.c +++ b/trunk/arch/powerpc/mm/numa.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -158,6 +157,35 @@ static void unmap_cpu_from_node(unsigned long cpu) } #endif /* CONFIG_HOTPLUG_CPU */ +static struct device_node * __cpuinit find_cpu_node(unsigned int cpu) +{ + unsigned int hw_cpuid = get_hard_smp_processor_id(cpu); + struct device_node *cpu_node = NULL; + const unsigned int *interrupt_server, *reg; + int len; + + while ((cpu_node = of_find_node_by_type(cpu_node, "cpu")) != NULL) { + /* Try interrupt server first */ + interrupt_server = of_get_property(cpu_node, + "ibm,ppc-interrupt-server#s", &len); + + len = len / sizeof(u32); + + if (interrupt_server && (len > 0)) { + while (len--) { + if (interrupt_server[len] == hw_cpuid) + return cpu_node; + } + } else { + reg = of_get_property(cpu_node, "reg", &len); + if (reg && (len > 0) && (reg[0] == hw_cpuid)) + return cpu_node; + } + } + + return NULL; +} + /* must hold reference to node during call */ static const int *of_get_associativity(struct device_node *dev) { @@ -261,7 +289,7 @@ static int __init find_min_common_depth(void) ref_points = of_get_property(rtas_root, "ibm,associativity-reference-points", &len); - if ((len >= 2 * sizeof(unsigned int)) && ref_points) { + if ((len >= 1) && ref_points) { depth = ref_points[1]; } else { dbg("NUMA: ibm,associativity-reference-points not found.\n"); @@ -441,7 +469,7 @@ static int of_drconf_to_nid_single(struct of_drconf_cell *drmem, static int __cpuinit numa_setup_cpu(unsigned long lcpu) { int nid = 0; - struct device_node *cpu = of_get_cpu_node(lcpu, NULL); + struct device_node *cpu = find_cpu_node(lcpu); if (!cpu) { WARN_ON(1); @@ -623,7 +651,7 @@ static int __init parse_numa_properties(void) for_each_present_cpu(i) { int nid; - cpu = of_get_cpu_node(i, NULL); + cpu = find_cpu_node(i); BUG_ON(!cpu); nid = of_node_to_nid_single(cpu); of_node_put(cpu); @@ -854,7 +882,7 @@ static void mark_reserved_regions_for_nid(int nid) unsigned long physbase = lmb.reserved.region[i].base; unsigned long size = lmb.reserved.region[i].size; unsigned long start_pfn = physbase >> PAGE_SHIFT; - unsigned long end_pfn = PFN_UP(physbase + size); + unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT); struct node_active_region node_ar; unsigned long node_end_pfn = node->node_start_pfn + node->node_spanned_pages; @@ -880,7 +908,7 @@ static void mark_reserved_regions_for_nid(int nid) */ if (end_pfn > node_ar.end_pfn) reserve_size = (node_ar.end_pfn << PAGE_SHIFT) - - physbase; + - (start_pfn << PAGE_SHIFT); /* * Only worry about *this* node, others may not * yet have valid NODE_DATA(). @@ -1012,32 +1040,57 @@ early_param("numa", early_numa); #ifdef CONFIG_MEMORY_HOTPLUG /* - * Find the node associated with a hot added memory section for - * memory represented in the device tree by the property - * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory. + * Validate the node associated with the memory section we are + * trying to add. + */ +int valid_hot_add_scn(int *nid, unsigned long start, u32 lmb_size, + unsigned long scn_addr) +{ + nodemask_t nodes; + + if (*nid < 0 || !node_online(*nid)) + *nid = any_online_node(NODE_MASK_ALL); + + if ((scn_addr >= start) && (scn_addr < (start + lmb_size))) { + nodes_setall(nodes); + while (NODE_DATA(*nid)->node_spanned_pages == 0) { + node_clear(*nid, nodes); + *nid = any_online_node(nodes); + } + + return 1; + } + + return 0; +} + +/* + * Find the node associated with a hot added memory section represented + * by the ibm,dynamic-reconfiguration-memory node. */ static int hot_add_drconf_scn_to_nid(struct device_node *memory, unsigned long scn_addr) { const u32 *dm; - unsigned int drconf_cell_cnt, rc; + unsigned int n, rc; unsigned long lmb_size; + int default_nid = any_online_node(NODE_MASK_ALL); + int nid; struct assoc_arrays aa; - int nid = -1; - drconf_cell_cnt = of_get_drconf_memory(memory, &dm); - if (!drconf_cell_cnt) - return -1; + n = of_get_drconf_memory(memory, &dm); + if (!n) + return default_nid;; lmb_size = of_get_lmb_size(memory); if (!lmb_size) - return -1; + return default_nid; rc = of_get_assoc_arrays(memory, &aa); if (rc) - return -1; + return default_nid; - for (; drconf_cell_cnt != 0; --drconf_cell_cnt) { + for (; n != 0; --n) { struct of_drconf_cell drmem; read_drconf_cell(&drmem, &dm); @@ -1048,57 +1101,15 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory, || !(drmem.flags & DRCONF_MEM_ASSIGNED)) continue; - if ((scn_addr < drmem.base_addr) - || (scn_addr >= (drmem.base_addr + lmb_size))) - continue; - nid = of_drconf_to_nid_single(&drmem, &aa); - break; - } - - return nid; -} -/* - * Find the node associated with a hot added memory section for memory - * represented in the device tree as a node (i.e. memory@XXXX) for - * each lmb. - */ -int hot_add_node_scn_to_nid(unsigned long scn_addr) -{ - struct device_node *memory = NULL; - int nid = -1; - - while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { - unsigned long start, size; - int ranges; - const unsigned int *memcell_buf; - unsigned int len; - - memcell_buf = of_get_property(memory, "reg", &len); - if (!memcell_buf || len <= 0) - continue; - - /* ranges in cell */ - ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells); - - while (ranges--) { - start = read_n_cells(n_mem_addr_cells, &memcell_buf); - size = read_n_cells(n_mem_size_cells, &memcell_buf); - - if ((scn_addr < start) || (scn_addr >= (start + size))) - continue; - - nid = of_node_to_nid_single(memory); - break; - } - - of_node_put(memory); - if (nid >= 0) - break; + if (valid_hot_add_scn(&nid, drmem.base_addr, lmb_size, + scn_addr)) + return nid; } - return nid; + BUG(); /* section address should be found above */ + return 0; } /* @@ -1109,7 +1120,7 @@ int hot_add_node_scn_to_nid(unsigned long scn_addr) int hot_add_scn_to_nid(unsigned long scn_addr) { struct device_node *memory = NULL; - int nid, found = 0; + int nid; if (!numa_enabled || (min_common_depth < 0)) return any_online_node(NODE_MASK_ALL); @@ -1118,25 +1129,35 @@ int hot_add_scn_to_nid(unsigned long scn_addr) if (memory) { nid = hot_add_drconf_scn_to_nid(memory, scn_addr); of_node_put(memory); - } else { - nid = hot_add_node_scn_to_nid(scn_addr); + return nid; } - if (nid < 0 || !node_online(nid)) - nid = any_online_node(NODE_MASK_ALL); + while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { + unsigned long start, size; + int ranges; + const unsigned int *memcell_buf; + unsigned int len; - if (NODE_DATA(nid)->node_spanned_pages) - return nid; + memcell_buf = of_get_property(memory, "reg", &len); + if (!memcell_buf || len <= 0) + continue; - for_each_online_node(nid) { - if (NODE_DATA(nid)->node_spanned_pages) { - found = 1; - break; + /* ranges in cell */ + ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells); +ha_new_range: + start = read_n_cells(n_mem_addr_cells, &memcell_buf); + size = read_n_cells(n_mem_size_cells, &memcell_buf); + nid = of_node_to_nid_single(memory); + + if (valid_hot_add_scn(&nid, start, size, scn_addr)) { + of_node_put(memory); + return nid; } - } - BUG_ON(!found); - return nid; + if (--ranges) /* process all ranges in cell */ + goto ha_new_range; + } + BUG(); /* section address should be found above */ + return 0; } - #endif /* CONFIG_MEMORY_HOTPLUG */ diff --git a/trunk/arch/powerpc/mm/pgtable.c b/trunk/arch/powerpc/mm/pgtable.c index a27ded3adac5..6d94116fdea1 100644 --- a/trunk/arch/powerpc/mm/pgtable.c +++ b/trunk/arch/powerpc/mm/pgtable.c @@ -1,6 +1,5 @@ /* * This file contains common routines for dealing with free of page tables - * Along with common page table handling code * * Derived from arch/powerpc/mm/tlb_64.c: * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) @@ -116,133 +115,3 @@ void pte_free_finish(void) pte_free_submit(*batchp); *batchp = NULL; } - -/* - * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags() - */ -static pte_t do_dcache_icache_coherency(pte_t pte) -{ - unsigned long pfn = pte_pfn(pte); - struct page *page; - - if (unlikely(!pfn_valid(pfn))) - return pte; - page = pfn_to_page(pfn); - - if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - pr_debug("do_dcache_icache_coherency... flushing\n"); - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); - } - else - pr_debug("do_dcache_icache_coherency... already clean\n"); - return __pte(pte_val(pte) | _PAGE_HWEXEC); -} - -static inline int is_exec_fault(void) -{ - return current->thread.regs && TRAP(current->thread.regs) == 0x400; -} - -/* We only try to do i/d cache coherency on stuff that looks like - * reasonably "normal" PTEs. We currently require a PTE to be present - * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE - */ -static inline int pte_looks_normal(pte_t pte) -{ - return (pte_val(pte) & - (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) == - (_PAGE_PRESENT); -} - -#if defined(CONFIG_PPC_STD_MMU) -/* Server-style MMU handles coherency when hashing if HW exec permission - * is supposed per page (currently 64-bit only). Else, we always flush - * valid PTEs in set_pte. - */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) -{ - return set_pte && pte_looks_normal(pte) && - !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) || - cpu_has_feature(CPU_FTR_NOEXECUTE)); -} -#elif _PAGE_HWEXEC == 0 -/* Embedded type MMU without HW exec support (8xx only so far), we flush - * the cache for any present PTE - */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) -{ - return set_pte && pte_looks_normal(pte); -} -#else -/* Other embedded CPUs with HW exec support per-page, we flush on exec - * fault if HWEXEC is not set - */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) -{ - return pte_looks_normal(pte) && is_exec_fault() && - !(pte_val(pte) & _PAGE_HWEXEC); -} -#endif - -/* - * set_pte stores a linux PTE into the linux page table. - */ -void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) -{ -#ifdef CONFIG_DEBUG_VM - WARN_ON(pte_present(*ptep)); -#endif - /* Note: mm->context.id might not yet have been assigned as - * this context might not have been activated yet when this - * is called. - */ - pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); - if (pte_need_exec_flush(pte, 1)) - pte = do_dcache_icache_coherency(pte); - - /* Perform the setting of the PTE */ - __set_pte_at(mm, addr, ptep, pte, 0); -} - -/* - * This is called when relaxing access to a PTE. It's also called in the page - * fault path when we don't hit any of the major fault cases, ie, a minor - * update of _PAGE_ACCESSED, _PAGE_DIRTY, etc... The generic code will have - * handled those two for us, we additionally deal with missing execute - * permission here on some processors - */ -int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, - pte_t *ptep, pte_t entry, int dirty) -{ - int changed; - if (!dirty && pte_need_exec_flush(entry, 0)) - entry = do_dcache_icache_coherency(entry); - changed = !pte_same(*(ptep), entry); - if (changed) { - assert_pte_locked(vma->vm_mm, address); - __ptep_set_access_flags(ptep, entry); - flush_tlb_page_nohash(vma, address); - } - return changed; -} - -#ifdef CONFIG_DEBUG_VM -void assert_pte_locked(struct mm_struct *mm, unsigned long addr) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - - if (mm == &init_mm) - return; - pgd = mm->pgd + pgd_index(addr); - BUG_ON(pgd_none(*pgd)); - pud = pud_offset(pgd, addr); - BUG_ON(pud_none(*pud)); - pmd = pmd_offset(pud, addr); - BUG_ON(!pmd_present(*pmd)); - BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd))); -} -#endif /* CONFIG_DEBUG_VM */ - diff --git a/trunk/arch/powerpc/mm/pgtable_32.c b/trunk/arch/powerpc/mm/pgtable_32.c index 58bcaeba728d..22972cd83cc9 100644 --- a/trunk/arch/powerpc/mm/pgtable_32.c +++ b/trunk/arch/powerpc/mm/pgtable_32.c @@ -61,8 +61,8 @@ void setbat(int index, unsigned long virt, phys_addr_t phys, #ifdef HAVE_TLBCAM extern unsigned int tlbcam_index; -extern phys_addr_t v_mapped_by_tlbcam(unsigned long va); -extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa); +extern unsigned long v_mapped_by_tlbcam(unsigned long va); +extern unsigned long p_mapped_by_tlbcam(unsigned long pa); #else /* !HAVE_TLBCAM */ #define v_mapped_by_tlbcam(x) (0UL) #define p_mapped_by_tlbcam(x) (0UL) diff --git a/trunk/arch/powerpc/mm/tlb_nohash_low.S b/trunk/arch/powerpc/mm/tlb_nohash_low.S index 788b87c36f77..f900a39e6ec4 100644 --- a/trunk/arch/powerpc/mm/tlb_nohash_low.S +++ b/trunk/arch/powerpc/mm/tlb_nohash_low.S @@ -118,50 +118,25 @@ _GLOBAL(_tlbil_pid) #elif defined(CONFIG_FSL_BOOKE) /* - * FSL BookE implementations. - * - * Since feature sections are using _SECTION_ELSE we need - * to have the larger code path before the _SECTION_ELSE + * FSL BookE implementations. Currently _pid and _all are the + * same. This will change when tlbilx is actually supported and + * performs invalidate-by-PID. This change will be driven by + * mmu_features conditional */ -#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \ - MMUCSR0_TLB2FI | MMUCSR0_TLB3FI) /* * Flush MMU TLB on the local processor */ -_GLOBAL(_tlbil_all) -BEGIN_MMU_FTR_SECTION - li r3,(MMUCSR0_TLBFI)@l - mtspr SPRN_MMUCSR0, r3 -1: - mfspr r3,SPRN_MMUCSR0 - andi. r3,r3,MMUCSR0_TLBFI@l - bne 1b -MMU_FTR_SECTION_ELSE - PPC_TLBILX_ALL(0,0) -ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) - msync - isync - blr - _GLOBAL(_tlbil_pid) -BEGIN_MMU_FTR_SECTION - slwi r3,r3,16 - mfmsr r10 - wrteei 0 - mfspr r4,SPRN_MAS6 /* save MAS6 */ - mtspr SPRN_MAS6,r3 - PPC_TLBILX_PID(0,0) - mtspr SPRN_MAS6,r4 /* restore MAS6 */ - wrtee r10 -MMU_FTR_SECTION_ELSE +_GLOBAL(_tlbil_all) +#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \ + MMUCSR0_TLB2FI | MMUCSR0_TLB3FI) li r3,(MMUCSR0_TLBFI)@l mtspr SPRN_MMUCSR0, r3 1: mfspr r3,SPRN_MMUCSR0 andi. r3,r3,MMUCSR0_TLBFI@l bne 1b -ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX) msync isync blr @@ -174,9 +149,7 @@ _GLOBAL(_tlbil_va) mfmsr r10 wrteei 0 slwi r4,r4,16 - ori r4,r4,(MAS6_ISIZE(BOOK3E_PAGESZ_4K))@l mtspr SPRN_MAS6,r4 /* assume AS=0 for now */ -BEGIN_MMU_FTR_SECTION tlbsx 0,r3 mfspr r4,SPRN_MAS1 /* check valid */ andis. r3,r4,MAS1_VALID@h @@ -184,9 +157,6 @@ BEGIN_MMU_FTR_SECTION rlwinm r4,r4,0,1,31 mtspr SPRN_MAS1,r4 tlbwe -MMU_FTR_SECTION_ELSE - PPC_TLBILX_VA(0,r3) -ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync 1: wrtee r10 diff --git a/trunk/arch/powerpc/oprofile/cell/spu_profiler.c b/trunk/arch/powerpc/oprofile/cell/spu_profiler.c index b129d007e7fe..9305ddaac512 100644 --- a/trunk/arch/powerpc/oprofile/cell/spu_profiler.c +++ b/trunk/arch/powerpc/oprofile/cell/spu_profiler.c @@ -16,7 +16,6 @@ #include #include #include -#include #include "pr_util.h" #define SCALE_SHIFT 14 diff --git a/trunk/arch/powerpc/platforms/44x/Kconfig b/trunk/arch/powerpc/platforms/44x/Kconfig index bf5c7ff2e6e5..3496bc05058e 100644 --- a/trunk/arch/powerpc/platforms/44x/Kconfig +++ b/trunk/arch/powerpc/platforms/44x/Kconfig @@ -118,17 +118,6 @@ config GLACIER help This option enables support for the AMCC PPC460GT evaluation board. -config REDWOOD - bool "Redwood" - depends on 44x - default n - select PPC44x_SIMPLE - select 460SX - select PCI - select PPC4xx_PCI_EXPRESS - help - This option enables support for the AMCC PPC460SX Redwood board. - config YOSEMITE bool "Yosemite" depends on 44x @@ -231,14 +220,6 @@ config 460EX select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_TAH -config 460SX - bool - select PPC_FPU - select IBM_NEW_EMAC_EMAC4 - select IBM_NEW_EMAC_RGMII - select IBM_NEW_EMAC_ZMII - select IBM_NEW_EMAC_TAH - # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 bool diff --git a/trunk/arch/powerpc/platforms/44x/ppc44x_simple.c b/trunk/arch/powerpc/platforms/44x/ppc44x_simple.c index 5bcd441885e8..76fdc51dac8b 100644 --- a/trunk/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/trunk/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -57,7 +57,6 @@ static char *board[] __initdata = { "ibm,ebony", "amcc,katmai", "amcc,rainier", - "amcc,redwood", "amcc,sequoia", "amcc,taishan", "amcc,yosemite" diff --git a/trunk/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/trunk/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c index ddf0bdc0fc8b..9876d7e072f4 100644 --- a/trunk/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c +++ b/trunk/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c @@ -186,7 +186,7 @@ int __init pq2ads_pci_init_irq(void) iounmap(priv->regs); out_free_bootmem: free_bootmem((unsigned long)priv, - sizeof(struct pq2ads_pci_pic)); + sizeof(sizeof(struct pq2ads_pci_pic))); of_node_put(np); out_unmap_irq: irq_dispose_mapping(irq); diff --git a/trunk/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/trunk/arch/powerpc/platforms/83xx/mpc831x_rdb.c index 0b4f883b20eb..91a2c80b9d72 100644 --- a/trunk/arch/powerpc/platforms/83xx/mpc831x_rdb.c +++ b/trunk/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -38,8 +38,6 @@ static void __init mpc831x_rdb_setup_arch(void) #ifdef CONFIG_PCI for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") mpc83xx_add_bridge(np); - for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") - mpc83xx_add_bridge(np); #endif mpc831x_usb_cfg(); } diff --git a/trunk/arch/powerpc/platforms/83xx/mpc837x_mds.c b/trunk/arch/powerpc/platforms/83xx/mpc837x_mds.c index 634785cc4523..530ef990ca7c 100644 --- a/trunk/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/trunk/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -84,10 +84,14 @@ static void __init mpc837x_mds_setup_arch(void) ppc_md.progress("mpc837x_mds_setup_arch()", 0); #ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); - for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") { + if (!of_device_is_available(np)) { + pr_warning("%s: disabled by the firmware.\n", + np->full_name); + continue; + } mpc83xx_add_bridge(np); + } #endif mpc837xmds_usb_cfg(); } diff --git a/trunk/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/trunk/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 3d7b953d40e1..1d096545322b 100644 --- a/trunk/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/trunk/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -38,8 +38,6 @@ static void __init mpc837x_rdb_setup_arch(void) #ifdef CONFIG_PCI for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") mpc83xx_add_bridge(np); - for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") - mpc83xx_add_bridge(np); #endif mpc837x_usb_cfg(); } diff --git a/trunk/arch/powerpc/platforms/83xx/usb.c b/trunk/arch/powerpc/platforms/83xx/usb.c index 11e1fac17c7f..cc99c280aad9 100644 --- a/trunk/arch/powerpc/platforms/83xx/usb.c +++ b/trunk/arch/powerpc/platforms/83xx/usb.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include @@ -211,7 +210,7 @@ int mpc837x_usb_cfg(void) int ret = 0; np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); - if (!np || !of_device_is_available(np)) + if (!np) return -ENODEV; prop = of_get_property(np, "phy_type", NULL); diff --git a/trunk/arch/powerpc/platforms/86xx/Kconfig b/trunk/arch/powerpc/platforms/86xx/Kconfig index fa276c689cf9..8e5693935975 100644 --- a/trunk/arch/powerpc/platforms/86xx/Kconfig +++ b/trunk/arch/powerpc/platforms/86xx/Kconfig @@ -31,14 +31,6 @@ config MPC8610_HPCD help This option enables support for the MPC8610 HPCD board. -config GEF_SBC310 - bool "GE Fanuc SBC310" - select DEFAULT_UIMAGE - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - This option enables support for GE Fanuc's SBC310. - config GEF_SBC610 bool "GE Fanuc SBC610" select DEFAULT_UIMAGE @@ -56,7 +48,7 @@ config MPC8641 select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC - default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 + default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 config MPC8610 bool diff --git a/trunk/arch/powerpc/platforms/86xx/Makefile b/trunk/arch/powerpc/platforms/86xx/Makefile index 7c080da4523a..31e540c2ebbc 100644 --- a/trunk/arch/powerpc/platforms/86xx/Makefile +++ b/trunk/arch/powerpc/platforms/86xx/Makefile @@ -9,4 +9,3 @@ obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y) -obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y) diff --git a/trunk/arch/powerpc/platforms/86xx/gef_gpio.c b/trunk/arch/powerpc/platforms/86xx/gef_gpio.c index b2ea8875adba..85b2800f4cb7 100644 --- a/trunk/arch/powerpc/platforms/86xx/gef_gpio.c +++ b/trunk/arch/powerpc/platforms/86xx/gef_gpio.c @@ -37,6 +37,8 @@ #define GEF_GPIO_OVERRUN 0x1C #define GEF_GPIO_MODE 0x20 +#define NUM_GPIO 19 + static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value) { unsigned int data; @@ -101,10 +103,10 @@ static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int __init gef_gpio_init(void) { struct device_node *np; - int retval; - struct of_mm_gpio_chip *gef_gpio_chip; for_each_compatible_node(np, NULL, "gef,sbc610-gpio") { + int retval; + struct of_mm_gpio_chip *gef_gpio_chip; pr_debug("%s: Initialising GEF GPIO\n", np->full_name); @@ -118,35 +120,7 @@ static int __init gef_gpio_init(void) /* Setup pointers to chip functions */ gef_gpio_chip->of_gc.gpio_cells = 2; - gef_gpio_chip->of_gc.gc.ngpio = 19; - gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; - gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; - gef_gpio_chip->of_gc.gc.get = gef_gpio_get; - gef_gpio_chip->of_gc.gc.set = gef_gpio_set; - - /* This function adds a memory mapped GPIO chip */ - retval = of_mm_gpiochip_add(np, gef_gpio_chip); - if (retval) { - kfree(gef_gpio_chip); - pr_err("%s: Unable to add GPIO\n", np->full_name); - } - } - - for_each_compatible_node(np, NULL, "gef,sbc310-gpio") { - - pr_debug("%s: Initialising GEF GPIO\n", np->full_name); - - /* Allocate chip structure */ - gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); - if (!gef_gpio_chip) { - pr_err("%s: Unable to allocate structure\n", - np->full_name); - continue; - } - - /* Setup pointers to chip functions */ - gef_gpio_chip->of_gc.gpio_cells = 2; - gef_gpio_chip->of_gc.gc.ngpio = 6; + gef_gpio_chip->of_gc.gc.ngpio = NUM_GPIO; gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; gef_gpio_chip->of_gc.gc.get = gef_gpio_get; diff --git a/trunk/arch/powerpc/platforms/86xx/gef_sbc310.c b/trunk/arch/powerpc/platforms/86xx/gef_sbc310.c deleted file mode 100644 index 0f20172af84b..000000000000 --- a/trunk/arch/powerpc/platforms/86xx/gef_sbc310.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * GE Fanuc SBC310 board support - * - * Author: Martyn Welch - * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) - * Copyright 2006 Freescale Semiconductor Inc. - * - * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include "mpc86xx.h" -#include "gef_pic.h" - -#undef DEBUG - -#ifdef DEBUG -#define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0) -#else -#define DBG (fmt...) do { } while (0) -#endif - -void __iomem *sbc310_regs; - -static void __init gef_sbc310_init_irq(void) -{ - struct device_node *cascade_node = NULL; - - mpc86xx_init_irq(); - - /* - * There is a simple interrupt handler in the main FPGA, this needs - * to be cascaded into the MPIC - */ - cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); - if (!cascade_node) { - printk(KERN_WARNING "SBC310: No FPGA PIC\n"); - return; - } - - gef_pic_init(cascade_node); - of_node_put(cascade_node); -} - -static void __init gef_sbc310_setup_arch(void) -{ - struct device_node *regs; -#ifdef CONFIG_PCI - struct device_node *np; - - for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") { - fsl_add_bridge(np, 1); - } -#endif - - printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n"); - -#ifdef CONFIG_SMP - mpc86xx_smp_init(); -#endif - - /* Remap basic board registers */ - regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); - if (regs) { - sbc310_regs = of_iomap(regs, 0); - if (sbc310_regs == NULL) - printk(KERN_WARNING "Unable to map board registers\n"); - of_node_put(regs); - } -} - -/* Return the PCB revision */ -static unsigned int gef_sbc310_get_board_id(void) -{ - unsigned int reg; - - reg = ioread32(sbc310_regs); - return reg & 0xff; -} - -/* Return the PCB revision */ -static unsigned int gef_sbc310_get_pcb_rev(void) -{ - unsigned int reg; - - reg = ioread32(sbc310_regs); - return (reg >> 8) & 0xff; -} - -/* Return the board (software) revision */ -static unsigned int gef_sbc310_get_board_rev(void) -{ - unsigned int reg; - - reg = ioread32(sbc310_regs); - return (reg >> 16) & 0xff; -} - -/* Return the FPGA revision */ -static unsigned int gef_sbc310_get_fpga_rev(void) -{ - unsigned int reg; - - reg = ioread32(sbc310_regs); - return (reg >> 24) & 0xf; -} - -static void gef_sbc310_show_cpuinfo(struct seq_file *m) -{ - uint svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); - - seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id()); - seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(), - ('A' + gef_sbc310_get_board_rev() - 1)); - seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc310_get_fpga_rev()); - - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - -} - -static void __init gef_sbc310_nec_fixup(struct pci_dev *pdev) -{ - unsigned int val; - - printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); - - /* Ensure only ports 1 & 2 are enabled */ - pci_read_config_dword(pdev, 0xe0, &val); - pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2); - - /* System clock is 48-MHz Oscillator and EHCI Enabled. */ - pci_write_config_dword(pdev, 0xe4, 1 << 5); -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, - gef_sbc310_nec_fixup); - -/* - * Called very early, device-tree isn't unflattened - * - * This function is called to determine whether the BSP is compatible with the - * supplied device-tree, which is assumed to be the correct one for the actual - * board. It is expected thati, in the future, a kernel may support multiple - * boards. - */ -static int __init gef_sbc310_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (of_flat_dt_is_compatible(root, "gef,sbc310")) - return 1; - - return 0; -} - -static long __init mpc86xx_time_init(void) -{ - unsigned int temp; - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - temp = mfspr(SPRN_HID0); - temp |= HID0_TBEN; - mtspr(SPRN_HID0, temp); - asm volatile("isync"); - - return 0; -} - -static __initdata struct of_device_id of_bus_ids[] = { - { .compatible = "simple-bus", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - printk(KERN_DEBUG "Probe platform devices\n"); - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(gef_sbc310, declare_of_platform_devices); - -define_machine(gef_sbc310) { - .name = "GE Fanuc SBC310", - .probe = gef_sbc310_probe, - .setup_arch = gef_sbc310_setup_arch, - .init_IRQ = gef_sbc310_init_irq, - .show_cpuinfo = gef_sbc310_show_cpuinfo, - .get_irq = mpic_get_irq, - .restart = fsl_rstcr_restart, - .time_init = mpc86xx_time_init, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -#endif -}; diff --git a/trunk/arch/powerpc/platforms/Kconfig b/trunk/arch/powerpc/platforms/Kconfig index b4ab3728653e..200b9cb900ea 100644 --- a/trunk/arch/powerpc/platforms/Kconfig +++ b/trunk/arch/powerpc/platforms/Kconfig @@ -28,7 +28,6 @@ source "arch/powerpc/platforms/86xx/Kconfig" source "arch/powerpc/platforms/embedded6xx/Kconfig" source "arch/powerpc/platforms/44x/Kconfig" source "arch/powerpc/platforms/40x/Kconfig" -source "arch/powerpc/platforms/amigaone/Kconfig" config PPC_NATIVE bool @@ -92,6 +91,15 @@ config RTAS_FLASH tristate "Firmware flash interface" depends on PPC64 && RTAS_PROC +config PPC_PMI + tristate "Support for PMI" + depends on PPC_IBM_CELL_BLADE + help + PMI (Platform Management Interrupt) is a way to + communicate with the BMC (Baseboard Management Controller). + It is used in some IBM Cell blades. + default m + config MMIO_NVRAM bool default n diff --git a/trunk/arch/powerpc/platforms/Kconfig.cputype b/trunk/arch/powerpc/platforms/Kconfig.cputype index 9428c0e11b20..e868b5c50723 100644 --- a/trunk/arch/powerpc/platforms/Kconfig.cputype +++ b/trunk/arch/powerpc/platforms/Kconfig.cputype @@ -210,10 +210,6 @@ config PPC_MMU_NOHASH def_bool y depends on !PPC_STD_MMU -config PPC_BOOK3E_MMU - def_bool y - depends on FSL_BOOKE - config PPC_MM_SLICES bool default y if HUGETLB_PAGE || (PPC_STD_MMU_64 && PPC_64K_PAGES) diff --git a/trunk/arch/powerpc/platforms/Makefile b/trunk/arch/powerpc/platforms/Makefile index f7419198e635..8079e0b4fd69 100644 --- a/trunk/arch/powerpc/platforms/Makefile +++ b/trunk/arch/powerpc/platforms/Makefile @@ -19,4 +19,3 @@ obj-$(CONFIG_PPC_PASEMI) += pasemi/ obj-$(CONFIG_PPC_CELL) += cell/ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ -obj-$(CONFIG_AMIGAONE) += amigaone/ diff --git a/trunk/arch/powerpc/platforms/amigaone/Kconfig b/trunk/arch/powerpc/platforms/amigaone/Kconfig deleted file mode 100644 index 9276a96cedee..000000000000 --- a/trunk/arch/powerpc/platforms/amigaone/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -config AMIGAONE - bool "Eyetech AmigaOne/MAI Teron" - depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM - select PPC_I8259 - select PPC_INDIRECT_PCI - select PPC_UDBG_16550 - select PCI - select NOT_COHERENT_CACHE - select CHECK_CACHE_COHERENCY - select DEFAULT_UIMAGE - select PCSPKR_PLATFORM - help - Select AmigaOne for the following machines: - - AmigaOne SE/Teron CX (G3 only) - - AmigaOne XE/Teron PX - - uA1/Teron mini - More information is available at: - . diff --git a/trunk/arch/powerpc/platforms/amigaone/Makefile b/trunk/arch/powerpc/platforms/amigaone/Makefile deleted file mode 100644 index e6885b3b2ee7..000000000000 --- a/trunk/arch/powerpc/platforms/amigaone/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += setup.o diff --git a/trunk/arch/powerpc/platforms/amigaone/setup.c b/trunk/arch/powerpc/platforms/amigaone/setup.c deleted file mode 100644 index 443035366c12..000000000000 --- a/trunk/arch/powerpc/platforms/amigaone/setup.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * AmigaOne platform setup - * - * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net) - * - * Based on original amigaone_setup.c source code - * Copyright 2003 by Hans-Joerg Frieden and Thomas Frieden - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -extern void __flush_disable_L1(void); - -void amigaone_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: Eyetech Ltd.\n"); -} - -static int __init amigaone_add_bridge(struct device_node *dev) -{ - const u32 *cfg_addr, *cfg_data; - int len; - const int *bus_range; - struct pci_controller *hose; - - printk(KERN_INFO "Adding PCI host bridge %s\n", dev->full_name); - - cfg_addr = of_get_address(dev, 0, NULL, NULL); - cfg_data = of_get_address(dev, 1, NULL, NULL); - if ((cfg_addr == NULL) || (cfg_data == NULL)) - return -ENODEV; - - bus_range = of_get_property(dev, "bus-range", &len); - if ((bus_range == NULL) || (len < 2 * sizeof(int))) - printk(KERN_WARNING "Can't get bus-range for %s, assume" - " bus 0\n", dev->full_name); - - hose = pcibios_alloc_controller(dev); - if (hose == NULL) - return -ENOMEM; - - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - setup_indirect_pci(hose, cfg_addr[0], cfg_data[0], 0); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev, 1); - - return 0; -} - -void __init amigaone_setup_arch(void) -{ - struct device_node *np; - int phb = -ENODEV; - - /* Lookup PCI host bridges. */ - for_each_compatible_node(np, "pci", "mai-logic,articia-s") - phb = amigaone_add_bridge(np); - - BUG_ON(phb != 0); - - if (ppc_md.progress) - ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0); -} - -void __init amigaone_init_IRQ(void) -{ - struct device_node *pic, *np = NULL; - const unsigned long *prop = NULL; - unsigned long int_ack = 0; - - /* Search for ISA interrupt controller. */ - pic = of_find_compatible_node(NULL, "interrupt-controller", - "pnpPNP,000"); - BUG_ON(pic == NULL); - - /* Look for interrupt acknowledge address in the PCI root node. */ - np = of_find_compatible_node(NULL, "pci", "mai-logic,articia-s"); - if (np) { - prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); - if (prop) - int_ack = prop[0]; - of_node_put(np); - } - - if (int_ack == 0) - printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" - " address, polling\n"); - - i8259_init(pic, int_ack); - ppc_md.get_irq = i8259_irq; - irq_set_default_host(i8259_get_host()); -} - -void __init amigaone_init(void) -{ - request_region(0x00, 0x20, "dma1"); - request_region(0x40, 0x20, "timer"); - request_region(0x80, 0x10, "dma page reg"); - request_region(0xc0, 0x20, "dma2"); -} - -void amigaone_restart(char *cmd) -{ - local_irq_disable(); - - /* Flush and disable caches. */ - __flush_disable_L1(); - - /* Set SRR0 to the reset vector and turn on MSR_IP. */ - mtspr(SPRN_SRR0, 0xfff00100); - mtspr(SPRN_SRR1, MSR_IP); - - /* Do an rfi to jump back to firmware. */ - __asm__ __volatile__("rfi" : : : "memory"); - - /* Not reached. */ - while (1); -} - -static int __init amigaone_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (of_flat_dt_is_compatible(root, "eyetech,amigaone")) { - /* - * Coherent memory access cause complete system lockup! Thus - * disable this CPU feature, even if the CPU needs it. - */ - cur_cpu_spec->cpu_features &= ~CPU_FTR_NEED_COHERENT; - - ISA_DMA_THRESHOLD = 0x00ffffff; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - return 1; - } - - return 0; -} - -define_machine(amigaone) { - .name = "AmigaOne", - .probe = amigaone_probe, - .setup_arch = amigaone_setup_arch, - .init = amigaone_init, - .show_cpuinfo = amigaone_show_cpuinfo, - .init_IRQ = amigaone_init_IRQ, - .restart = amigaone_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; diff --git a/trunk/arch/powerpc/platforms/cell/Kconfig b/trunk/arch/powerpc/platforms/cell/Kconfig index 037f59a4bfe7..5cc3279559a4 100644 --- a/trunk/arch/powerpc/platforms/cell/Kconfig +++ b/trunk/arch/powerpc/platforms/cell/Kconfig @@ -98,7 +98,7 @@ config PPC_IBM_CELL_RESETBUTTON config PPC_IBM_CELL_POWERBUTTON tristate "IBM Cell Blade power button" - depends on PPC_IBM_CELL_BLADE && INPUT_EVDEV + depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV default y help Support Powerbutton on IBM Cell blades. @@ -118,9 +118,9 @@ config CBE_CPUFREQ For details, take a look at . If you don't have such processor, say N -config CBE_CPUFREQ_PMI_ENABLE - bool "CBE frequency scaling using PMI interface" - depends on CBE_CPUFREQ && EXPERIMENTAL +config CBE_CPUFREQ_PMI + tristate "CBE frequency scaling using PMI interface" + depends on CBE_CPUFREQ && PPC_PMI && EXPERIMENTAL default n help Select this, if you want to use the PMI interface @@ -128,20 +128,6 @@ config CBE_CPUFREQ_PMI_ENABLE processor will not only be able to run at lower speed, but also at lower core voltage. -config CBE_CPUFREQ_PMI - tristate - depends on CBE_CPUFREQ_PMI_ENABLE - default CBE_CPUFREQ - -config PPC_PMI - tristate - default y - depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON - help - PMI (Platform Management Interrupt) is a way to - communicate with the BMC (Baseboard Management Controller). - It is used in some IBM Cell blades. - config CBE_CPUFREQ_SPU_GOVERNOR tristate "CBE frequency scaling based on SPU usage" depends on SPU_FS && CPU_FREQ diff --git a/trunk/arch/powerpc/platforms/cell/qpace_setup.c b/trunk/arch/powerpc/platforms/cell/qpace_setup.c index c75b66278fa2..be84e6a16b30 100644 --- a/trunk/arch/powerpc/platforms/cell/qpace_setup.c +++ b/trunk/arch/powerpc/platforms/cell/qpace_setup.c @@ -141,8 +141,6 @@ define_machine(qpace) { .power_off = rtas_power_off, .halt = rtas_halt, .get_boot_time = rtas_get_boot_time, - .get_rtc_time = rtas_get_rtc_time, - .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, .progress = qpace_progress, .init_IRQ = iic_init_IRQ, diff --git a/trunk/arch/powerpc/platforms/cell/spu_fault.c b/trunk/arch/powerpc/platforms/cell/spu_fault.c index 95d8dadf2d87..c8b1cd42905d 100644 --- a/trunk/arch/powerpc/platforms/cell/spu_fault.c +++ b/trunk/arch/powerpc/platforms/cell/spu_fault.c @@ -39,56 +39,60 @@ int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, unsigned long is_write; int ret; - if (mm == NULL) +#if 0 + if (!IS_VALID_EA(ea)) { return -EFAULT; - - if (mm->pgd == NULL) + } +#endif /* XXX */ + if (mm == NULL) { + return -EFAULT; + } + if (mm->pgd == NULL) { return -EFAULT; + } down_read(&mm->mmap_sem); - ret = -EFAULT; vma = find_vma(mm, ea); if (!vma) - goto out_unlock; - - if (ea < vma->vm_start) { - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto out_unlock; - if (expand_stack(vma, ea)) - goto out_unlock; - } - + goto bad_area; + if (vma->vm_start <= ea) + goto good_area; + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto bad_area; + if (expand_stack(vma, ea)) + goto bad_area; +good_area: is_write = dsisr & MFC_DSISR_ACCESS_PUT; if (is_write) { if (!(vma->vm_flags & VM_WRITE)) - goto out_unlock; + goto bad_area; } else { if (dsisr & MFC_DSISR_ACCESS_DENIED) - goto out_unlock; + goto bad_area; if (!(vma->vm_flags & (VM_READ | VM_EXEC))) - goto out_unlock; + goto bad_area; } - ret = 0; *flt = handle_mm_fault(mm, vma, ea, is_write); if (unlikely(*flt & VM_FAULT_ERROR)) { if (*flt & VM_FAULT_OOM) { ret = -ENOMEM; - goto out_unlock; + goto bad_area; } else if (*flt & VM_FAULT_SIGBUS) { ret = -EFAULT; - goto out_unlock; + goto bad_area; } BUG(); } - if (*flt & VM_FAULT_MAJOR) current->maj_flt++; else current->min_flt++; - -out_unlock: up_read(&mm->mmap_sem); return ret; + +bad_area: + up_read(&mm->mmap_sem); + return -EFAULT; } EXPORT_SYMBOL_GPL(spu_handle_mm_fault); diff --git a/trunk/arch/powerpc/platforms/cell/spufs/file.c b/trunk/arch/powerpc/platforms/cell/spufs/file.c index 9e4f2739341d..0da7f2bf5ee1 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/file.c +++ b/trunk/arch/powerpc/platforms/cell/spufs/file.c @@ -2665,7 +2665,7 @@ static const struct file_operations spufs_ctx_fops = { .release = single_release, }; -const struct spufs_tree_descr spufs_dir_contents[] = { +struct spufs_tree_descr spufs_dir_contents[] = { { "capabilities", &spufs_caps_fops, 0444, }, { "mem", &spufs_mem_fops, 0666, LS_SIZE, }, { "regs", &spufs_regs_fops, 0666, sizeof(struct spu_reg128[128]), }, @@ -2706,7 +2706,7 @@ const struct spufs_tree_descr spufs_dir_contents[] = { {}, }; -const struct spufs_tree_descr spufs_dir_nosched_contents[] = { +struct spufs_tree_descr spufs_dir_nosched_contents[] = { { "capabilities", &spufs_caps_fops, 0444, }, { "mem", &spufs_mem_fops, 0666, LS_SIZE, }, { "mbox", &spufs_mbox_fops, 0444, }, @@ -2731,12 +2731,12 @@ const struct spufs_tree_descr spufs_dir_nosched_contents[] = { {}, }; -const struct spufs_tree_descr spufs_dir_debug_contents[] = { +struct spufs_tree_descr spufs_dir_debug_contents[] = { { ".ctx", &spufs_ctx_fops, 0444, }, {}, }; -const struct spufs_coredump_reader spufs_coredump_read[] = { +struct spufs_coredump_reader spufs_coredump_read[] = { { "regs", __spufs_regs_read, NULL, sizeof(struct spu_reg128[128])}, { "fpcr", __spufs_fpcr_read, NULL, sizeof(struct spu_reg128) }, { "lslr", NULL, spufs_lslr_get, 19 }, diff --git a/trunk/arch/powerpc/platforms/cell/spufs/inode.c b/trunk/arch/powerpc/platforms/cell/spufs/inode.c index 64f068540d0d..e309ef70a531 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/inode.c +++ b/trunk/arch/powerpc/platforms/cell/spufs/inode.c @@ -186,9 +186,8 @@ static int spufs_rmdir(struct inode *parent, struct dentry *dir) return simple_rmdir(parent, dir); } -static int spufs_fill_dir(struct dentry *dir, - const struct spufs_tree_descr *files, int mode, - struct spu_context *ctx) +static int spufs_fill_dir(struct dentry *dir, struct spufs_tree_descr *files, + int mode, struct spu_context *ctx) { struct dentry *dentry, *tmp; int ret; diff --git a/trunk/arch/powerpc/platforms/cell/spufs/run.c b/trunk/arch/powerpc/platforms/cell/spufs/run.c index 4ddf769a64e5..c58bd36b0c5b 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/run.c +++ b/trunk/arch/powerpc/platforms/cell/spufs/run.c @@ -117,9 +117,6 @@ static int spu_setup_isolated(struct spu_context *ctx) cond_resched(); } - /* clear purge status */ - out_be64(mfc_cntl, 0); - /* put the SPE in kernel mode to allow access to the loader */ sr1 = spu_mfc_sr1_get(ctx->spu); sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK; diff --git a/trunk/arch/powerpc/platforms/cell/spufs/spufs.h b/trunk/arch/powerpc/platforms/cell/spufs/spufs.h index ae31573bea4a..3bf908e2873a 100644 --- a/trunk/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/trunk/arch/powerpc/platforms/cell/spufs/spufs.h @@ -241,9 +241,9 @@ struct spufs_tree_descr { size_t size; }; -extern const struct spufs_tree_descr spufs_dir_contents[]; -extern const struct spufs_tree_descr spufs_dir_nosched_contents[]; -extern const struct spufs_tree_descr spufs_dir_debug_contents[]; +extern struct spufs_tree_descr spufs_dir_contents[]; +extern struct spufs_tree_descr spufs_dir_nosched_contents[]; +extern struct spufs_tree_descr spufs_dir_debug_contents[]; /* system call implementation */ extern struct spufs_calls spufs_calls; @@ -358,7 +358,7 @@ struct spufs_coredump_reader { u64 (*get)(struct spu_context *ctx); size_t size; }; -extern const struct spufs_coredump_reader spufs_coredump_read[]; +extern struct spufs_coredump_reader spufs_coredump_read[]; extern int spufs_coredump_num_notes; extern int spu_init_csa(struct spu_state *csa); diff --git a/trunk/arch/powerpc/platforms/chrp/pegasos_eth.c b/trunk/arch/powerpc/platforms/chrp/pegasos_eth.c index 039fc8e82199..130ff72d99dd 100644 --- a/trunk/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/trunk/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -21,8 +21,8 @@ #define PEGASOS2_SRAM_BASE (0xf2000000) #define PEGASOS2_SRAM_SIZE (256*1024) -#define PEGASOS2_SRAM_BASE_ETH_PORT0 (PEGASOS2_SRAM_BASE) -#define PEGASOS2_SRAM_BASE_ETH_PORT1 (PEGASOS2_SRAM_BASE_ETH_PORT0 + (PEGASOS2_SRAM_SIZE / 2) ) +#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE) +#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) ) #define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4) @@ -47,42 +47,75 @@ static struct platform_device mv643xx_eth_shared_device = { .resource = mv643xx_eth_shared_resources, }; -static struct resource mv643xx_eth_port1_resources[] = { +static struct resource mv643xx_eth0_resources[] = { [0] = { - .name = "eth port1 irq", + .name = "eth0 irq", .start = 9, .end = 9, .flags = IORESOURCE_IRQ, }, }; -static struct mv643xx_eth_platform_data eth_port1_pd = { + +static struct mv643xx_eth_platform_data eth0_pd = { + .shared = &mv643xx_eth_shared_device, + .port_number = 0, + + .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0, + .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, + .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, + + .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE, + .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, + .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, +}; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth0_resources), + .resource = mv643xx_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; + +static struct resource mv643xx_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = 9, + .end = 9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv643xx_eth_platform_data eth1_pd = { .shared = &mv643xx_eth_shared_device, .port_number = 1, - .phy_addr = MV643XX_ETH_PHY_ADDR(7), - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1, + .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1, .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1 + PEGASOS2_SRAM_TXRING_SIZE, + .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE, .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, }; -static struct platform_device eth_port1_device = { +static struct platform_device eth1_device = { .name = MV643XX_ETH_NAME, .id = 1, - .num_resources = ARRAY_SIZE(mv643xx_eth_port1_resources), - .resource = mv643xx_eth_port1_resources, + .num_resources = ARRAY_SIZE(mv643xx_eth1_resources), + .resource = mv643xx_eth1_resources, .dev = { - .platform_data = ð_port1_pd, + .platform_data = ð1_pd, }, }; static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { &mv643xx_eth_shared_device, - ð_port1_device, + ð0_device, + ð1_device, }; /***********/ @@ -158,10 +191,15 @@ static int __init mv643xx_eth_add_pds(void) if ( Enable_SRAM() < 0) { - eth_port1_pd.tx_sram_addr = 0; - eth_port1_pd.tx_sram_size = 0; - eth_port1_pd.rx_sram_addr = 0; - eth_port1_pd.rx_sram_size = 0; + eth0_pd.tx_sram_addr = 0; + eth0_pd.tx_sram_size = 0; + eth0_pd.rx_sram_addr = 0; + eth0_pd.rx_sram_size = 0; + + eth1_pd.tx_sram_addr = 0; + eth1_pd.tx_sram_size = 0; + eth1_pd.rx_sram_addr = 0; + eth1_pd.rx_sram_size = 0; #ifdef BE_VERBOSE printk("Pegasos II/Marvell MV64361: Can't enable the " diff --git a/trunk/arch/powerpc/platforms/powermac/setup.c b/trunk/arch/powerpc/platforms/powermac/setup.c index 45936c9ed0ec..9b78f5300c24 100644 --- a/trunk/arch/powerpc/platforms/powermac/setup.c +++ b/trunk/arch/powerpc/platforms/powermac/setup.c @@ -746,7 +746,4 @@ define_machine(powermac) { #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64) .cpu_die = pmac_cpu_die, #endif -#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) - .cpu_die = generic_mach_cpu_die, -#endif }; diff --git a/trunk/arch/powerpc/platforms/ps3/mm.c b/trunk/arch/powerpc/platforms/ps3/mm.c index d281cc0bca71..67de6bf3db3d 100644 --- a/trunk/arch/powerpc/platforms/ps3/mm.c +++ b/trunk/arch/powerpc/platforms/ps3/mm.c @@ -328,7 +328,7 @@ static int __init ps3_mm_add_memory(void) return result; } -device_initcall(ps3_mm_add_memory); +core_initcall(ps3_mm_add_memory); /*============================================================================*/ /* dma routines */ diff --git a/trunk/arch/powerpc/platforms/pseries/eeh_driver.c b/trunk/arch/powerpc/platforms/pseries/eeh_driver.c index 380420f8c400..0ad56ff7b4a0 100644 --- a/trunk/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/trunk/arch/powerpc/platforms/pseries/eeh_driver.c @@ -79,40 +79,6 @@ static int irq_in_use(unsigned int irq) return rc; } -/** - * eeh_disable_irq - disable interrupt for the recovering device - */ -static void eeh_disable_irq(struct pci_dev *dev) -{ - struct device_node *dn = pci_device_to_OF_node(dev); - - /* Don't disable MSI and MSI-X interrupts. They are - * effectively disabled by the DMA Stopped state - * when an EEH error occurs. - */ - if (dev->msi_enabled || dev->msix_enabled) - return; - - if (!irq_in_use(dev->irq)) - return; - - PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; - disable_irq_nosync(dev->irq); -} - -/** - * eeh_enable_irq - enable interrupt for the recovering device - */ -static void eeh_enable_irq(struct pci_dev *dev) -{ - struct device_node *dn = pci_device_to_OF_node(dev); - - if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { - PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; - enable_irq(dev->irq); - } -} - /* ------------------------------------------------------- */ /** * eeh_report_error - report pci error to each device driver @@ -132,8 +98,11 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) if (!driver) return; - eeh_disable_irq(dev); - + if (irq_in_use (dev->irq)) { + struct device_node *dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; + disable_irq_nosync(dev->irq); + } if (!driver->err_handler || !driver->err_handler->error_detected) return; @@ -178,12 +147,15 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; + struct device_node *dn = pci_device_to_OF_node(dev); if (!driver) return; - eeh_enable_irq(dev); - + if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { + PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; + enable_irq(dev->irq); + } if (!driver->err_handler || !driver->err_handler->slot_reset) return; @@ -202,14 +174,17 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) static void eeh_report_resume(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; + struct device_node *dn = pci_device_to_OF_node(dev); dev->error_state = pci_channel_io_normal; if (!driver) return; - eeh_enable_irq(dev); - + if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { + PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; + enable_irq(dev->irq); + } if (!driver->err_handler || !driver->err_handler->resume) return; @@ -233,12 +208,15 @@ static void eeh_report_failure(struct pci_dev *dev, void *userdata) if (!driver) return; - eeh_disable_irq(dev); - - if (!driver->err_handler || - !driver->err_handler->error_detected) + if (irq_in_use (dev->irq)) { + struct device_node *dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; + disable_irq_nosync(dev->irq); + } + if (!driver->err_handler) + return; + if (!driver->err_handler->error_detected) return; - driver->err_handler->error_detected(dev, pci_channel_io_perm_failure); } diff --git a/trunk/arch/powerpc/platforms/pseries/hotplug-memory.c b/trunk/arch/powerpc/platforms/pseries/hotplug-memory.c index 9b21ee68ea50..a623ad256e9e 100644 --- a/trunk/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/trunk/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -14,7 +14,6 @@ #include #include #include -#include static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size) { diff --git a/trunk/arch/powerpc/platforms/pseries/msi.c b/trunk/arch/powerpc/platforms/pseries/msi.c index 3e0d6ef3eca9..f15222bbe136 100644 --- a/trunk/arch/powerpc/platforms/pseries/msi.c +++ b/trunk/arch/powerpc/platforms/pseries/msi.c @@ -71,13 +71,11 @@ static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs) } while (rtas_busy_delay(rc)); /* - * If the RTAS call succeeded, return the number of irqs allocated. - * If not, make sure we return a negative error code. + * If the RTAS call succeeded, check the number of irqs is actually + * what we asked for. If not, return an error. */ - if (rc == 0) - rc = rtas_ret[0]; - else if (rc > 0) - rc = -rc; + if (rc == 0 && rtas_ret[0] != num_irqs) + rc = -ENOSPC; pr_debug("rtas_msi: ibm,change_msi(func=%d,num=%d), got %d rc = %d\n", func, num_irqs, rtas_ret[0], rc); @@ -93,7 +91,7 @@ static void rtas_disable_msi(struct pci_dev *pdev) if (!pdn) return; - if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0) != 0) + if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0)) pr_debug("rtas_msi: Setting MSIs to 0 failed!\n"); } @@ -134,7 +132,7 @@ static void rtas_teardown_msi_irqs(struct pci_dev *pdev) rtas_disable_msi(pdev); } -static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) +static int check_req_msi(struct pci_dev *pdev, int nvec) { struct device_node *dn; struct pci_dn *pdn; @@ -146,214 +144,26 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) dn = pdn->node; - req_msi = of_get_property(dn, prop_name, NULL); + req_msi = of_get_property(dn, "ibm,req#msi", NULL); if (!req_msi) { - pr_debug("rtas_msi: No %s on %s\n", prop_name, dn->full_name); + pr_debug("rtas_msi: No ibm,req#msi on %s\n", dn->full_name); return -ENOENT; } if (*req_msi < nvec) { - pr_debug("rtas_msi: %s requests < %d MSIs\n", prop_name, nvec); - - if (*req_msi == 0) /* Be paranoid */ - return -ENOSPC; - - return *req_msi; + pr_debug("rtas_msi: ibm,req#msi requests < %d MSIs\n", nvec); + return -ENOSPC; } return 0; } -static int check_req_msi(struct pci_dev *pdev, int nvec) -{ - return check_req(pdev, nvec, "ibm,req#msi"); -} - -static int check_req_msix(struct pci_dev *pdev, int nvec) -{ - return check_req(pdev, nvec, "ibm,req#msi-x"); -} - -/* Quota calculation */ - -static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) -{ - struct device_node *dn; - const u32 *p; - - dn = of_node_get(pci_device_to_OF_node(dev)); - while (dn) { - p = of_get_property(dn, "ibm,pe-total-#msi", NULL); - if (p) { - pr_debug("rtas_msi: found prop on dn %s\n", - dn->full_name); - *total = *p; - return dn; - } - - dn = of_get_next_parent(dn); - } - - return NULL; -} - -static struct device_node *find_pe_dn(struct pci_dev *dev, int *total) -{ - struct device_node *dn; - - /* Found our PE and assume 8 at that point. */ - - dn = pci_device_to_OF_node(dev); - if (!dn) - return NULL; - - dn = find_device_pe(dn); - if (!dn) - return NULL; - - /* We actually want the parent */ - dn = of_get_parent(dn); - if (!dn) - return NULL; - - /* Hardcode of 8 for old firmwares */ - *total = 8; - pr_debug("rtas_msi: using PE dn %s\n", dn->full_name); - - return dn; -} - -struct msi_counts { - struct device_node *requestor; - int num_devices; - int request; - int quota; - int spare; - int over_quota; -}; - -static void *count_non_bridge_devices(struct device_node *dn, void *data) -{ - struct msi_counts *counts = data; - const u32 *p; - u32 class; - - pr_debug("rtas_msi: counting %s\n", dn->full_name); - - p = of_get_property(dn, "class-code", NULL); - class = p ? *p : 0; - - if ((class >> 8) != PCI_CLASS_BRIDGE_PCI) - counts->num_devices++; - - return NULL; -} - -static void *count_spare_msis(struct device_node *dn, void *data) -{ - struct msi_counts *counts = data; - const u32 *p; - int req; - - if (dn == counts->requestor) - req = counts->request; - else { - /* We don't know if a driver will try to use MSI or MSI-X, - * so we just have to punt and use the larger of the two. */ - req = 0; - p = of_get_property(dn, "ibm,req#msi", NULL); - if (p) - req = *p; - - p = of_get_property(dn, "ibm,req#msi-x", NULL); - if (p) - req = max(req, (int)*p); - } - - if (req < counts->quota) - counts->spare += counts->quota - req; - else if (req > counts->quota) - counts->over_quota++; - - return NULL; -} - -static int msi_quota_for_device(struct pci_dev *dev, int request) -{ - struct device_node *pe_dn; - struct msi_counts counts; - int total; - - pr_debug("rtas_msi: calc quota for %s, request %d\n", pci_name(dev), - request); - - pe_dn = find_pe_total_msi(dev, &total); - if (!pe_dn) - pe_dn = find_pe_dn(dev, &total); - - if (!pe_dn) { - pr_err("rtas_msi: couldn't find PE for %s\n", pci_name(dev)); - goto out; - } - - pr_debug("rtas_msi: found PE %s\n", pe_dn->full_name); - - memset(&counts, 0, sizeof(struct msi_counts)); - - /* Work out how many devices we have below this PE */ - traverse_pci_devices(pe_dn, count_non_bridge_devices, &counts); - - if (counts.num_devices == 0) { - pr_err("rtas_msi: found 0 devices under PE for %s\n", - pci_name(dev)); - goto out; - } - - counts.quota = total / counts.num_devices; - if (request <= counts.quota) - goto out; - - /* else, we have some more calculating to do */ - counts.requestor = pci_device_to_OF_node(dev); - counts.request = request; - traverse_pci_devices(pe_dn, count_spare_msis, &counts); - - /* If the quota isn't an integer multiple of the total, we can - * use the remainder as spare MSIs for anyone that wants them. */ - counts.spare += total % counts.num_devices; - - /* Divide any spare by the number of over-quota requestors */ - if (counts.over_quota) - counts.quota += counts.spare / counts.over_quota; - - /* And finally clamp the request to the possibly adjusted quota */ - request = min(counts.quota, request); - - pr_debug("rtas_msi: request clamped to quota %d\n", request); -out: - of_node_put(pe_dn); - - return request; -} - static int rtas_msi_check_device(struct pci_dev *pdev, int nvec, int type) { - int quota, rc; - if (type == PCI_CAP_ID_MSIX) - rc = check_req_msix(pdev, nvec); - else - rc = check_req_msi(pdev, nvec); - - if (rc) - return rc; + pr_debug("rtas_msi: MSI-X untested, trying anyway.\n"); - quota = msi_quota_for_device(pdev, nvec); - - if (quota && quota < nvec) - return quota; - - return 0; + return check_req_msi(pdev, nvec); } static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) @@ -375,21 +185,21 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) if (type == PCI_CAP_ID_MSI) { rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec); - if (rc < 0) { + if (rc) { pr_debug("rtas_msi: trying the old firmware call.\n"); rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec); } } else rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec); - if (rc != nvec) { + if (rc) { pr_debug("rtas_msi: rtas_change_msi() failed\n"); return rc; } i = 0; list_for_each_entry(entry, &pdev->msi_list, list) { - hwirq = rtas_query_irq_number(pdn, i++); + hwirq = rtas_query_irq_number(pdn, i); if (hwirq < 0) { pr_debug("rtas_msi: error (%d) getting hwirq\n", rc); return hwirq; @@ -424,8 +234,8 @@ static void rtas_msi_pci_irq_fixup(struct pci_dev *pdev) } /* No MSI -> MSIs can't have been assigned by fw, leave LSI */ - if (check_req_msi(pdev, 1) && check_req_msix(pdev, 1)) { - dev_dbg(&pdev->dev, "rtas_msi: no req#msi/x, nothing to do.\n"); + if (check_req_msi(pdev, 1)) { + dev_dbg(&pdev->dev, "rtas_msi: no req#msi, nothing to do.\n"); return; } diff --git a/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c b/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c index ad152a0e3946..5e1ed3d60ee5 100644 --- a/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -137,9 +137,11 @@ EXPORT_SYMBOL_GPL(pcibios_add_pci_devices); struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) { struct pci_controller *phb; + int primary; pr_debug("PCI: Initializing new hotplug PHB %s\n", dn->full_name); + primary = list_empty(&hose_list); phb = pcibios_alloc_controller(dn); if (!phb) return NULL; diff --git a/trunk/arch/powerpc/sysdev/cpm2.c b/trunk/arch/powerpc/sysdev/cpm2.c index 474d176a6ec3..f1c3395633b9 100644 --- a/trunk/arch/powerpc/sysdev/cpm2.c +++ b/trunk/arch/powerpc/sysdev/cpm2.c @@ -129,8 +129,7 @@ void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src) brg -= 4; } bp += brg; - /* Round the clock divider to the nearest integer. */ - val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src; + val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src; if (div16) val |= CPM_BRG_DIV16; diff --git a/trunk/arch/powerpc/sysdev/cpm2_pic.c b/trunk/arch/powerpc/sysdev/cpm2_pic.c index 78f1f7cca0a0..b16ca3ed65d2 100644 --- a/trunk/arch/powerpc/sysdev/cpm2_pic.c +++ b/trunk/arch/powerpc/sysdev/cpm2_pic.c @@ -165,7 +165,7 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) edibit = (14 - (src - CPM2_IRQ_EXT1)); else if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) - edibit = (31 - (CPM2_IRQ_PORTC0 - src)); + edibit = (31 - (src - CPM2_IRQ_PORTC15)); else return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL; diff --git a/trunk/arch/powerpc/sysdev/fsl_pci.c b/trunk/arch/powerpc/sysdev/fsl_pci.c index 78021d8afc53..9817f63723dd 100644 --- a/trunk/arch/powerpc/sysdev/fsl_pci.c +++ b/trunk/arch/powerpc/sysdev/fsl_pci.c @@ -1,16 +1,12 @@ /* * MPC83xx/85xx/86xx PCI/PCIE support routing. * - * Copyright 2007-2009 Freescale Semiconductor, Inc. - * Copyright 2008-2009 MontaVista Software, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc * * Initial author: Xianghua Xiao * Recode: ZHANG WEI * Rewrite the routing for Frescale PCI and PCI Express * Roy Zang - * MPC83xx PCI-Express support: - * Tony Li - * Anton Vorontsov * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -31,29 +27,6 @@ #include #include -static int fsl_pcie_bus_fixup; - -static void __init quirk_fsl_pcie_header(struct pci_dev *dev) -{ - /* if we aren't a PCIe don't bother */ - if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) - return; - - dev->class = PCI_CLASS_BRIDGE_PCI << 8; - fsl_pcie_bus_fixup = 1; - return; -} - -static int __init fsl_pcie_check_link(struct pci_controller *hose) -{ - u32 val; - - early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); - if (val < PCIE_LTSSM_L0) - return 1; - return 0; -} - #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, unsigned int index, const struct resource *res, @@ -186,6 +159,28 @@ static void __init setup_pci_pcsrbar(struct pci_controller *hose) #endif } +static int fsl_pcie_bus_fixup; + +static void __init quirk_fsl_pcie_header(struct pci_dev *dev) +{ + /* if we aren't a PCIe don't bother */ + if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) + return ; + + dev->class = PCI_CLASS_BRIDGE_PCI << 8; + fsl_pcie_bus_fixup = 1; + return ; +} + +static int __init fsl_pcie_check_link(struct pci_controller *hose) +{ + u32 val; + early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); + if (val < PCIE_LTSSM_L0) + return 1; + return 0; +} + void fsl_pcibios_fixup_bus(struct pci_bus *bus) { struct pci_controller *hose = (struct pci_controller *) bus->sysdata; @@ -299,184 +294,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header); - -struct mpc83xx_pcie_priv { - void __iomem *cfg_type0; - void __iomem *cfg_type1; - u32 dev_base; -}; - -/* - * With the convention of u-boot, the PCIE outbound window 0 serves - * as configuration transactions outbound. - */ -#define PEX_OUTWIN0_BAR 0xCA4 -#define PEX_OUTWIN0_TAL 0xCA8 -#define PEX_OUTWIN0_TAH 0xCAC - -static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) -{ - struct pci_controller *hose = bus->sysdata; - - if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Workaround for the HW bug: for Type 0 configure transactions the - * PCI-E controller does not check the device number bits and just - * assumes that the device number bits are 0. - */ - if (bus->number == hose->first_busno || - bus->primary == hose->first_busno) { - if (devfn & 0xf8) - return PCIBIOS_DEVICE_NOT_FOUND; - } - - if (ppc_md.pci_exclude_device) { - if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, - unsigned int devfn, int offset) -{ - struct pci_controller *hose = bus->sysdata; - struct mpc83xx_pcie_priv *pcie = hose->dn->data; - u8 bus_no = bus->number - hose->first_busno; - u32 dev_base = bus_no << 24 | devfn << 16; - int ret; - - ret = mpc83xx_pcie_exclude_device(bus, devfn); - if (ret) - return NULL; - - offset &= 0xfff; - - /* Type 0 */ - if (bus->number == hose->first_busno) - return pcie->cfg_type0 + offset; - - if (pcie->dev_base == dev_base) - goto mapped; - - out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); - - pcie->dev_base = dev_base; -mapped: - return pcie->cfg_type1 + offset; -} - -static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - void __iomem *cfg_addr; - - cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); - if (!cfg_addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (len) { - case 1: - *val = in_8(cfg_addr); - break; - case 2: - *val = in_le16(cfg_addr); - break; - default: - *val = in_le32(cfg_addr); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - void __iomem *cfg_addr; - - cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); - if (!cfg_addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (len) { - case 1: - out_8(cfg_addr, val); - break; - case 2: - out_le16(cfg_addr, val); - break; - default: - out_le32(cfg_addr, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops mpc83xx_pcie_ops = { - .read = mpc83xx_pcie_read_config, - .write = mpc83xx_pcie_write_config, -}; - -static int __init mpc83xx_pcie_setup(struct pci_controller *hose, - struct resource *reg) -{ - struct mpc83xx_pcie_priv *pcie; - u32 cfg_bar; - int ret = -ENOMEM; - - pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); - if (!pcie) - return ret; - - pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); - if (!pcie->cfg_type0) - goto err0; - - cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); - if (!cfg_bar) { - /* PCI-E isn't configured. */ - ret = -ENODEV; - goto err1; - } - - pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); - if (!pcie->cfg_type1) - goto err1; - - WARN_ON(hose->dn->data); - hose->dn->data = pcie; - hose->ops = &mpc83xx_pcie_ops; - - out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); - out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); - - if (fsl_pcie_check_link(hose)) - hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; - - return 0; -err1: - iounmap(pcie->cfg_type0); -err0: - kfree(pcie); - return ret; - -} - int __init mpc83xx_add_bridge(struct device_node *dev) { - int ret; int len; struct pci_controller *hose; struct resource rsrc_reg; @@ -484,11 +303,6 @@ int __init mpc83xx_add_bridge(struct device_node *dev) const int *bus_range; int primary; - if (!of_device_is_available(dev)) { - pr_warning("%s: disabled by the firmware.\n", - dev->full_name); - return -ENODEV; - } pr_debug("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ @@ -536,14 +350,7 @@ int __init mpc83xx_add_bridge(struct device_node *dev) hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { - ret = mpc83xx_pcie_setup(hose, &rsrc_reg); - if (ret) - goto err0; - } else { - setup_indirect_pci(hose, rsrc_cfg.start, - rsrc_cfg.start + 4, 0); - } + setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0); printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", @@ -558,8 +365,5 @@ int __init mpc83xx_add_bridge(struct device_node *dev) pci_process_bridge_OF_ranges(hose, dev, primary); return 0; -err0: - pcibios_free_controller(hose); - return ret; } #endif /* CONFIG_PPC_83xx */ diff --git a/trunk/arch/powerpc/sysdev/fsl_soc.c b/trunk/arch/powerpc/sysdev/fsl_soc.c index a01c89d3f9bd..115cb16351fd 100644 --- a/trunk/arch/powerpc/sysdev/fsl_soc.c +++ b/trunk/arch/powerpc/sysdev/fsl_soc.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -329,9 +328,6 @@ static int __init fsl_usb_of_init(void) struct fsl_usb2_platform_data usb_data; const unsigned char *prop = NULL; - if (!of_device_is_available(np)) - continue; - memset(&r, 0, sizeof(r)); memset(&usb_data, 0, sizeof(usb_data)); diff --git a/trunk/arch/powerpc/sysdev/ipic.c b/trunk/arch/powerpc/sysdev/ipic.c index a86d3ce01ead..88a983ece5c9 100644 --- a/trunk/arch/powerpc/sysdev/ipic.c +++ b/trunk/arch/powerpc/sysdev/ipic.c @@ -568,7 +568,8 @@ static void ipic_ack_irq(unsigned int virq) spin_lock_irqsave(&ipic_lock, flags); - temp = 1 << (31 - ipic_info[src].bit); + temp = ipic_read(ipic->regs, ipic_info[src].ack); + temp |= (1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].ack, temp); /* mb() can't guarantee that ack is finished. But it does finish @@ -591,7 +592,8 @@ static void ipic_mask_irq_and_ack(unsigned int virq) temp &= ~(1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].mask, temp); - temp = 1 << (31 - ipic_info[src].bit); + temp = ipic_read(ipic->regs, ipic_info[src].ack); + temp |= (1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].ack, temp); /* mb() can't guarantee that ack is finished. But it does finish @@ -888,7 +890,7 @@ unsigned int ipic_get_irq(void) return irq_linear_revmap(primary_ipic->irqhost, irq); } -#ifdef CONFIG_SUSPEND +#ifdef CONFIG_PM static struct { u32 sicfr; u32 siprr[2]; diff --git a/trunk/arch/powerpc/sysdev/ppc4xx_pci.c b/trunk/arch/powerpc/sysdev/ppc4xx_pci.c index ef0fafcbfbcb..77fae5f64f2e 100644 --- a/trunk/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/trunk/arch/powerpc/sysdev/ppc4xx_pci.c @@ -1822,8 +1822,6 @@ static int __init ppc4xx_pci_find_bridges(void) { struct device_node *np; - ppc_pci_flags |= PPC_PCI_ENABLE_PROC_DOMAINS | PPC_PCI_COMPAT_DOMAIN_0; - #ifdef CONFIG_PPC4xx_PCI_EXPRESS for_each_compatible_node(np, NULL, "ibm,plb-pciex") ppc4xx_probe_pciex_bridge(np); diff --git a/trunk/arch/s390/defconfig b/trunk/arch/s390/defconfig index 31e809c77790..a0e748da9909 100644 --- a/trunk/arch/s390/defconfig +++ b/trunk/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Wed Feb 11 10:07:16 2009 +# Linux kernel version: 2.6.28-rc6 +# Thu Nov 27 11:00:49 2008 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -14,14 +14,12 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_BUG=y CONFIG_NO_IOMEM=y CONFIG_NO_DMA=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_PGSTE=y -CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_S390=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,29 +39,20 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUP_CPUACCT is not set # CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y @@ -74,7 +63,6 @@ CONFIG_UTS_NS=y CONFIG_IPC_NS=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -103,17 +91,17 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -CONFIG_HAVE_SYSCALL_WRAPPERS=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_USE_GENERIC_SMP_HELPERS=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -121,7 +109,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_INIT_ALL_POSSIBLE=y +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set @@ -142,6 +130,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -172,7 +161,6 @@ CONFIG_S390_EXEC_PROTECT=y CONFIG_MARCH_Z900=y # CONFIG_MARCH_Z990 is not set # CONFIG_MARCH_Z9_109 is not set -# CONFIG_MARCH_Z10 is not set CONFIG_PACK_STACK=y # CONFIG_SMALL_STACK is not set CONFIG_CHECK_STACK=y @@ -186,6 +174,7 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -206,6 +195,7 @@ CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -217,6 +207,7 @@ CONFIG_UNEVICTABLE_LRU=y # CONFIG_MACHCHK_WARNING=y CONFIG_QDIO=y +# CONFIG_QDIO_DEBUG is not set CONFIG_CHSC_SCH=m # @@ -236,13 +227,15 @@ CONFIG_PFAULT=y # CONFIG_SHARED_KERNEL is not set # CONFIG_CMM is not set # CONFIG_PAGE_STATES is not set +CONFIG_VIRT_TIMER=y +CONFIG_VIRT_CPU_ACCOUNTING=y # CONFIG_APPLDATA_BASE is not set CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -CONFIG_SCHED_HRTICK=y +# CONFIG_SCHED_HRTICK is not set CONFIG_S390_HYPFS_FS=y CONFIG_KEXEC=y # CONFIG_ZFCPDUMP is not set @@ -252,7 +245,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -391,7 +383,6 @@ CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m # CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_DRR is not set # CONFIG_NET_SCH_INGRESS is not set # @@ -409,7 +400,6 @@ CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m -# CONFIG_NET_CLS_CGROUP is not set # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y @@ -421,7 +411,6 @@ CONFIG_NET_ACT_NAT=m # CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y -# CONFIG_DCB is not set # # Network testing @@ -439,7 +428,6 @@ CONFIG_CAN_VCAN=m # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set -# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_PCMCIA is not set @@ -487,14 +475,10 @@ CONFIG_DASD_DIAG=y CONFIG_DASD_EER=y CONFIG_VIRTIO_BLK=m CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set -# -# EEPROM support -# -# CONFIG_EEPROM_93CX6 is not set - # # SCSI device support # @@ -536,7 +520,6 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ZFCP=y CONFIG_SCSI_DH=m @@ -583,10 +566,6 @@ CONFIG_NET_ETHERNET=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y # CONFIG_TR is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# # CONFIG_WAN is not set # @@ -614,11 +593,9 @@ CONFIG_VIRTIO_NET=m # CONFIG_DEVKMEM=y CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_HVC_DRIVER=y -CONFIG_HVC_IUCV=y CONFIG_VIRTIO_CONSOLE=y CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_VIRTIO=m @@ -668,6 +645,7 @@ CONFIG_S390_VMUR=m # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y # CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -690,7 +668,6 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -726,7 +703,10 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m -CONFIG_MISC_FILESYSTEMS=y + +# +# Miscellaneous filesystems +# # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -735,7 +715,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -829,7 +808,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -840,19 +818,15 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y # # Tracers # -# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set @@ -873,17 +847,11 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -917,7 +885,7 @@ CONFIG_CRYPTO_HMAC=m # # Digest # -CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -974,7 +942,6 @@ CONFIG_S390_PRNG=m # Library routines # CONFIG_BITREVERSE=m -CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/trunk/arch/s390/include/asm/lowcore.h b/trunk/arch/s390/include/asm/lowcore.h index f3720defdd16..ffdef5fe8587 100644 --- a/trunk/arch/s390/include/asm/lowcore.h +++ b/trunk/arch/s390/include/asm/lowcore.h @@ -384,8 +384,8 @@ struct _lowcore __u32 panic_magic; /* 0xe00 */ /* Per cpu primary space access list */ - __u8 pad_0xe04[0xe38-0xe04]; /* 0xe04 */ - __u64 vdso_per_cpu_data; /* 0xe38 */ + __u8 pad_0xe04[0xe3c-0xe04]; /* 0xe04 */ + __u32 vdso_per_cpu_data; /* 0xe3c */ __u32 paste[16]; /* 0xe40 */ __u8 pad13[0x11b8-0xe80]; /* 0xe80 */ diff --git a/trunk/arch/s390/kernel/irq.c b/trunk/arch/s390/kernel/irq.c index 026a37a94fc9..e7c5bfb7c755 100644 --- a/trunk/arch/s390/kernel/irq.c +++ b/trunk/arch/s390/kernel/irq.c @@ -95,7 +95,6 @@ asmlinkage void do_softirq(void) local_irq_restore(flags); } -#ifdef CONFIG_PROC_FS void init_irq_proc(void) { struct proc_dir_entry *root_irq_dir; @@ -103,4 +102,3 @@ void init_irq_proc(void) root_irq_dir = proc_mkdir("irq", NULL); create_prof_cpu_mask(root_irq_dir); } -#endif diff --git a/trunk/arch/s390/kvm/kvm-s390.c b/trunk/arch/s390/kvm/kvm-s390.c index 0d33893e1e89..be8497186b96 100644 --- a/trunk/arch/s390/kvm/kvm-s390.c +++ b/trunk/arch/s390/kvm/kvm-s390.c @@ -212,10 +212,6 @@ static void kvm_free_vcpus(struct kvm *kvm) } } -void kvm_arch_sync_events(struct kvm *kvm) -{ -} - void kvm_arch_destroy_vm(struct kvm *kvm) { kvm_free_vcpus(kvm); diff --git a/trunk/arch/sh/boards/board-ap325rxa.c b/trunk/arch/sh/boards/board-ap325rxa.c index 7c35787d29b4..caf4c33f4e84 100644 --- a/trunk/arch/sh/boards/board-ap325rxa.c +++ b/trunk/arch/sh/boards/board-ap325rxa.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include