From 9eebd908dac61128511b0528c0b34a975e160068 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Wed, 7 Jan 2009 23:14:38 +0800
Subject: [PATCH] --- yaml --- r: 127090 b: refs/heads/master c:
 85a192e92dcb67552ee3fcdf2e36c11688b61955 h: refs/heads/master v: v3

---
 [refs]                                        |  2 +-
 trunk/arch/blackfin/mach-bf537/boards/stamp.c | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/[refs] b/[refs]
index 0cf2ccd2deba..e45865e7e62e 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8f362f8d7b743adb7279c5371dfccd8edcb224fc
+refs/heads/master: 85a192e92dcb67552ee3fcdf2e36c11688b61955
diff --git a/trunk/arch/blackfin/mach-bf537/boards/stamp.c b/trunk/arch/blackfin/mach-bf537/boards/stamp.c
index e6e722d7767e..c198f9085ad5 100644
--- a/trunk/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/trunk/arch/blackfin/mach-bf537/boards/stamp.c
@@ -623,6 +623,14 @@ static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
+	.enable_dma	= 1,
+	.bits_per_word	= 8,
+	.cs_gpio = GPIO_PF10,
+};
+#endif
+
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 
@@ -784,6 +792,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+	{
+		.modalias = "enc28j60",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF6,
+		.bus_num = 0,
+		.chip_select = 0,	/* GPIO controlled SSEL */
+		.controller_data = &enc28j60_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)