diff --git a/[refs] b/[refs] index ea440c726800..1b9881bb464b 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 152b92db7ad2c6d6c11c8eab07e90b73a90c8b76 +refs/heads/master: 33d78647dc409784c18aa71995346e6955802fe0 diff --git a/trunk/CREDITS b/trunk/CREDITS index d78359f5f64d..a7ea8e343836 100644 --- a/trunk/CREDITS +++ b/trunk/CREDITS @@ -518,14 +518,6 @@ N: Zach Brown E: zab@zabbo.net D: maestro pci sound -M: David Brownell -D: Kernel engineer, mentor, and friend. Maintained USB EHCI and -D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few -D: device drivers. His encouragement also helped many engineers get -D: started working on the Linux kernel. David passed away in early -D: 2011, and will be greatly missed. -W: https://lkml.org/lkml/2011/4/5/36 - N: Gary Brubaker E: xavyer@ix.netcom.com D: USB Serial Empeg Empeg-car Mark I/II Driver diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index fd248a318211..d9a203b058f1 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -2598,8 +2598,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. unlock ejectable media); m = MAX_SECTORS_64 (don't transfer more than 64 sectors = 32 KB at a time); - n = INITIAL_READ10 (force a retry of the - initial READ(10) command); o = CAPACITY_OK (accept the capacity reported by the device); r = IGNORE_RESIDUE (the device reports diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index e50fc6eb99e0..29801f760b6f 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -1739,7 +1739,7 @@ S: Supported F: drivers/net/enic/ CIRRUS LOGIC EP93XX ETHERNET DRIVER -M: Hartley Sweeten +M: Lennert Buytenhek L: netdev@vger.kernel.org S: Maintained F: drivers/net/arm/ep93xx_eth.c @@ -4252,7 +4252,8 @@ F: drivers/mmc/ F: include/linux/mmc/ MULTIMEDIA CARD (MMC) ETC. OVER SPI -S: Orphan +M: David Brownell +S: Odd Fixes F: drivers/mmc/host/mmc_spi.c F: include/linux/spi/mmc_spi.h @@ -4602,6 +4603,7 @@ F: drivers/media/video/omap3isp/* OMAP USB SUPPORT M: Felipe Balbi +M: David Brownell L: linux-usb@vger.kernel.org L: linux-omap@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git @@ -4945,7 +4947,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.gi F: drivers/input/serio/i8042-unicore32io.h F: drivers/i2c/busses/i2c-puv3.c F: drivers/video/fb-puv3.c -F: drivers/rtc/rtc-puv3.c PMC SIERRA MaxRAID DRIVER M: Anil Ravindranath @@ -5983,6 +5984,7 @@ F: Documentation/serial/specialix.txt F: drivers/staging/tty/specialix* SPI SUBSYSTEM +M: David Brownell M: Grant Likely L: spi-devel-general@lists.sourceforge.net Q: http://patchwork.kernel.org/project/spi-devel-general/list/ @@ -6430,8 +6432,9 @@ S: Maintained F: drivers/usb/misc/rio500* USB EHCI DRIVER +M: David Brownell L: linux-usb@vger.kernel.org -S: Orphan +S: Odd Fixes F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* @@ -6445,10 +6448,9 @@ S: Maintained F: drivers/media/video/et61x251/ USB GADGET/PERIPHERAL SUBSYSTEM -M: Felipe Balbi +M: David Brownell L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/gadget -T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained F: drivers/usb/gadget/ F: include/linux/usb/gadget* @@ -6490,8 +6492,9 @@ S: Maintained F: sound/usb/midi.* USB OHCI DRIVER +M: David Brownell L: linux-usb@vger.kernel.org -S: Orphan +S: Odd Fixes F: Documentation/usb/ohci.txt F: drivers/usb/host/ohci* diff --git a/trunk/Makefile b/trunk/Makefile index 72c0e321f2da..0f1db8d90741 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -378,7 +378,7 @@ KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds # Read KERNELRELEASE from include/config/kernel.release (if it exists) KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) -KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) +KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC @@ -1005,7 +1005,7 @@ endef define filechk_version.h (echo \#define LINUX_VERSION_CODE $(shell \ - expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ + expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) endef @@ -1110,6 +1110,11 @@ modules_install: _modinst_ _modinst_post PHONY += _modinst_ _modinst_: + @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \ + echo "Warning: you may need to install module-init-tools"; \ + echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ + sleep 1; \ + fi @rm -rf $(MODLIB)/kernel @rm -f $(MODLIB)/source @mkdir -p $(MODLIB)/kernel @@ -1526,7 +1531,12 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)) # Run depmod only if we have System.map and depmod is executable quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) - cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE) + cmd_depmod = \ + if [ -r System.map -a -x $(DEPMOD) ]; then \ + $(DEPMOD) -ae -F System.map \ + $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \ + $(KERNELRELEASE); \ + fi # Create temporary dir for module support files # clean it up only when building all modules diff --git a/trunk/arch/arm/mach-ep93xx/core.c b/trunk/arch/arm/mach-ep93xx/core.c index 1d4b65fd673e..82079545adc4 100644 --- a/trunk/arch/arm/mach-ep93xx/core.c +++ b/trunk/arch/arm/mach-ep93xx/core.c @@ -402,15 +402,11 @@ static struct resource ep93xx_eth_resource[] = { } }; -static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); - static struct platform_device ep93xx_eth_device = { .name = "ep93xx-eth", .id = -1, .dev = { - .platform_data = &ep93xx_eth_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_eth_dma_mask, + .platform_data = &ep93xx_eth_data, }, .num_resources = ARRAY_SIZE(ep93xx_eth_resource), .resource = ep93xx_eth_resource, diff --git a/trunk/arch/arm/mach-omap1/dma.c b/trunk/arch/arm/mach-omap1/dma.c index f5a52204b89f..d8559344c6e2 100644 --- a/trunk/arch/arm/mach-omap1/dma.c +++ b/trunk/arch/arm/mach-omap1/dma.c @@ -284,15 +284,14 @@ static int __init omap1_system_dma_init(void) dma_base = ioremap(res[0].start, resource_size(&res[0])); if (!dma_base) { pr_err("%s: Unable to ioremap\n", __func__); - ret = -ENODEV; - goto exit_device_put; + return -ENODEV; } ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_device_put; + goto exit_device_del; } p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); @@ -300,7 +299,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", __func__, pdev->name); ret = -ENOMEM; - goto exit_device_del; + goto exit_device_put; } d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); @@ -381,10 +380,10 @@ static int __init omap1_system_dma_init(void) kfree(d); exit_release_p: kfree(p); -exit_device_del: - platform_device_del(pdev); exit_device_put: platform_device_put(pdev); +exit_device_del: + platform_device_del(pdev); return ret; } diff --git a/trunk/arch/arm/mach-omap2/board-2430sdp.c b/trunk/arch/arm/mach-omap2/board-2430sdp.c index 5de6eac0a725..d54969be0a54 100644 --- a/trunk/arch/arm/mach-omap2/board-2430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-2430sdp.c @@ -26,13 +26,13 @@ #include #include #include -#include #include #include #include #include +#include #include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-3430sdp.c b/trunk/arch/arm/mach-omap2/board-3430sdp.c index 5dac974be625..ae2963a98041 100644 --- a/trunk/arch/arm/mach-omap2/board-3430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-3430sdp.c @@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = { OMAP_MUX_MODE0), }; -static struct omap_board_data serial1_data __initdata = { +static struct omap_board_data serial1_data = { .id = 0, .pads = serial1_pads, .pads_cnt = ARRAY_SIZE(serial1_pads), }; -static struct omap_board_data serial2_data __initdata = { +static struct omap_board_data serial2_data = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data __initdata = { +static struct omap_board_data serial3_data = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), diff --git a/trunk/arch/arm/mach-omap2/board-4430sdp.c b/trunk/arch/arm/mach-omap2/board-4430sdp.c index 63de2d396e2d..73fa90bb6953 100644 --- a/trunk/arch/arm/mach-omap2/board-4430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-4430sdp.c @@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = { { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, }; -static int __init omap_ethernet_init(void) +static int omap_ethernet_init(void) { int status; @@ -322,7 +322,6 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = -EINVAL, .nonremovable = true, .ocr_mask = MMC_VDD_29_30, - .no_off_init = true, }, { .mmc = 1, @@ -682,19 +681,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data __initdata = { +static struct omap_board_data serial2_data = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data __initdata = { +static struct omap_board_data serial3_data = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data __initdata = { +static struct omap_board_data serial4_data = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -730,7 +729,7 @@ static void __init omap_4430sdp_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, NULL, package); + omap4_mux_init(board_mux, package); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); diff --git a/trunk/arch/arm/mach-omap2/board-apollon.c b/trunk/arch/arm/mach-omap2/board-apollon.c index b124bdfb4239..f3beb8eeef77 100644 --- a/trunk/arch/arm/mach-omap2/board-apollon.c +++ b/trunk/arch/arm/mach-omap2/board-apollon.c @@ -27,13 +27,13 @@ #include #include #include -#include #include #include #include #include +#include #include #include #include diff --git a/trunk/arch/arm/mach-omap2/board-cm-t35.c b/trunk/arch/arm/mach-omap2/board-cm-t35.c index 77456dec93ea..c63115bc1536 100644 --- a/trunk/arch/arm/mach-omap2/board-cm-t35.c +++ b/trunk/arch/arm/mach-omap2/board-cm-t35.c @@ -63,6 +63,8 @@ #define SB_T35_SMSC911X_CS 4 #define SB_T35_SMSC911X_GPIO 65 +#define NAND_BLOCK_SIZE SZ_128K + #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include #include diff --git a/trunk/arch/arm/mach-omap2/board-cm-t3517.c b/trunk/arch/arm/mach-omap2/board-cm-t3517.c index c3a9fd35034a..08f08e812492 100644 --- a/trunk/arch/arm/mach-omap2/board-cm-t3517.c +++ b/trunk/arch/arm/mach-omap2/board-cm-t3517.c @@ -48,7 +48,6 @@ #include "mux.h" #include "control.h" -#include "common-board-devices.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -178,7 +177,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL, }; -static int __init cm_t3517_init_usbh(void) +static int cm_t3517_init_usbh(void) { int err; @@ -204,6 +203,8 @@ static inline int cm_t3517_init_usbh(void) #endif #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +#define NAND_BLOCK_SIZE SZ_128K + static struct mtd_partition cm_t3517_nand_partitions[] = { { .name = "xloader", diff --git a/trunk/arch/arm/mach-omap2/board-devkit8000.c b/trunk/arch/arm/mach-omap2/board-devkit8000.c index 34956ec83296..cf520d7dd614 100644 --- a/trunk/arch/arm/mach-omap2/board-devkit8000.c +++ b/trunk/arch/arm/mach-omap2/board-devkit8000.c @@ -61,6 +61,8 @@ #include "timer-gp.h" #include "common-board-devices.h" +#define NAND_BLOCK_SIZE SZ_128K + #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 diff --git a/trunk/arch/arm/mach-omap2/board-omap3beagle.c b/trunk/arch/arm/mach-omap2/board-omap3beagle.c index 7f21d24bd437..be71426359f2 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3beagle.c +++ b/trunk/arch/arm/mach-omap2/board-omap3beagle.c @@ -54,6 +54,8 @@ #include "pm.h" #include "common-board-devices.h" +#define NAND_BLOCK_SIZE SZ_128K + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -104,9 +106,6 @@ static void __init omap3_beagle_init_rev(void) beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); - gpio_free_array(omap3_beagle_rev_gpios, - ARRAY_SIZE(omap3_beagle_rev_gpios)); - switch (beagle_rev) { case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); @@ -580,9 +579,6 @@ static void __init omap3_beagle_init(void) omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); - /* Ensure msecure is mux'd to be able to set the RTC. */ - omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); - /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/trunk/arch/arm/mach-omap2/board-omap3pandora.c b/trunk/arch/arm/mach-omap2/board-omap3pandora.c index 2a0bb4818cae..1d10736c6d3c 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3pandora.c +++ b/trunk/arch/arm/mach-omap2/board-omap3pandora.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -42,6 +41,7 @@ #include #include +#include #include #include #include @@ -57,6 +57,8 @@ #define PANDORA_WIFI_NRESET_GPIO 23 #define OMAP3_PANDORA_TS_GPIO 94 +#define NAND_BLOCK_SIZE SZ_128K + static struct mtd_partition omap3pandora_nand_partitions[] = { { .name = "xloader", diff --git a/trunk/arch/arm/mach-omap2/board-omap3touchbook.c b/trunk/arch/arm/mach-omap2/board-omap3touchbook.c index 5f649faf7377..82872d7d313b 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/trunk/arch/arm/mach-omap2/board-omap3touchbook.c @@ -56,6 +56,8 @@ #include +#define NAND_BLOCK_SIZE SZ_128K + #define OMAP3_AC_GPIO 136 #define OMAP3_TS_GPIO 162 #define TB_BL_PWM_TIMER 9 diff --git a/trunk/arch/arm/mach-omap2/board-omap4panda.c b/trunk/arch/arm/mach-omap2/board-omap4panda.c index 0cfe2005cb50..90485fced973 100644 --- a/trunk/arch/arm/mach-omap2/board-omap4panda.c +++ b/trunk/arch/arm/mach-omap2/board-omap4panda.c @@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data __initdata = { +static struct omap_board_data serial2_data = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data __initdata = { +static struct omap_board_data serial3_data = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data __initdata = { +static struct omap_board_data serial4_data = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -687,7 +687,7 @@ static void __init omap4_panda_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, NULL, package); + omap4_mux_init(board_mux, package); if (wl12xx_set_platform_data(&omap_panda_wlan_data)) pr_err("error setting wl12xx data\n"); diff --git a/trunk/arch/arm/mach-omap2/board-overo.c b/trunk/arch/arm/mach-omap2/board-overo.c index 175e1ab2b04d..1555918e3ffa 100644 --- a/trunk/arch/arm/mach-omap2/board-overo.c +++ b/trunk/arch/arm/mach-omap2/board-overo.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -46,6 +45,7 @@ #include #include