diff --git a/[refs] b/[refs] index ab21f57b6ecb..33a1ef3edcb7 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: b70a6b27ed4cbb9ea7a4e1abc080ed65692ecb9b +refs/heads/master: 3070f69b66b7ab2f02d8a2500edae07039c38508 diff --git a/trunk/arch/mips/Kconfig b/trunk/arch/mips/Kconfig index 653574bc19cf..5f149b030c0f 100644 --- a/trunk/arch/mips/Kconfig +++ b/trunk/arch/mips/Kconfig @@ -238,8 +238,21 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MACH_EMMA - bool "NEC EMMA series based machines" +config MARKEINS + bool "NEC EMMA2RH Mark-eins" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select HW_HAS_PCI + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_CPU_R5000 + help + This enables support for the R5432-based NEC Mark-eins + boards with R5500 CPU. config MACH_VR41XX bool "NEC VR4100 series based machines" @@ -248,19 +261,6 @@ config MACH_VR41XX select SYS_HAS_CPU_VR41XX select GENERIC_HARDIRQS_NO__DO_IRQ -config NXP_STB220 - bool "NXP STB220 board" - select SOC_PNX833X - help - Support for NXP Semiconductors STB220 Development Board. - -config NXP_STB225 - bool "NXP 225 board" - select SOC_PNX833X - select SOC_PNX8335 - help - Support for NXP Semiconductors STB225 Development Board. - config PNX8550_JBS bool "NXP PNX8550 based JBS board" select PNX8550 @@ -601,7 +601,6 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" -source "arch/mips/emma/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -850,24 +849,6 @@ config MIPS_RM9122 bool select SERIAL_RM9000 -config SOC_PNX833X - bool - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU - select DMA_NONCOHERENT - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - select GENERIC_GPIO - select CPU_MIPSR2_IRQ_VI - -config SOC_PNX8335 - bool - select SOC_PNX833X - config PNX8550 bool select SOC_PNX8550 @@ -1111,16 +1092,6 @@ config CPU_R5432 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL -config CPU_R5500 - bool "R5500" - depends on SYS_HAS_CPU_R5500 - select CPU_HAS_LLSC - select CPU_SUPPORTS_32BIT_KERNEL - select CPU_SUPPORTS_64BIT_KERNEL - help - NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV - instruction set. - config CPU_R6000 bool "R6000" depends on EXPERIMENTAL @@ -1231,9 +1202,6 @@ config SYS_HAS_CPU_R5000 config SYS_HAS_CPU_R5432 bool -config SYS_HAS_CPU_R5500 - bool - config SYS_HAS_CPU_R6000 bool diff --git a/trunk/arch/mips/Makefile b/trunk/arch/mips/Makefile index 28c55f608913..7f39fd8a91fe 100644 --- a/trunk/arch/mips/Makefile +++ b/trunk/arch/mips/Makefile @@ -131,8 +131,6 @@ cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_ cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ -Wa,--trap -cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ - -Wa,--trap cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ -Wa,--trap cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ @@ -383,14 +381,6 @@ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 # load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 -# NXP STB225 -core-$(CONFIG_SOC_PNX833X) += arch/mips/nxp/pnx833x/common/ -cflags-$(CONFIG_SOC_PNX833X) += -Iarch/mips/include/asm/mach-pnx833x -libs-$(CONFIG_NXP_STB220) += arch/mips/nxp/pnx833x/stb22x/ -load-$(CONFIG_NXP_STB220) += 0xffffffff80001000 -libs-$(CONFIG_NXP_STB225) += arch/mips/nxp/pnx833x/stb22x/ -load-$(CONFIG_NXP_STB225) += 0xffffffff80001000 - # # Common NXP PNX8550 # @@ -409,17 +399,14 @@ load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 libs-$(CONFIG_PNX8550_STB810) += arch/mips/nxp/pnx8550/stb810/ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 +# NEC EMMA2RH boards # -# Common NEC EMMAXXX -# -core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/ -cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh +core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/ +cflags-$(CONFIG_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh -# # NEC EMMA2RH Mark-eins -# -core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/ -load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000 +core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/ +load-$(CONFIG_MARKEINS) += 0xffffffff88100000 # # SGI IP22 (Indy/Indigo2) diff --git a/trunk/arch/mips/alchemy/common/platform.c b/trunk/arch/mips/alchemy/common/platform.c index 5c76c6448e04..dc8a67efac28 100644 --- a/trunk/arch/mips/alchemy/common/platform.c +++ b/trunk/arch/mips/alchemy/common/platform.c @@ -17,8 +17,6 @@ #include #include -#include -#include #define PORT(_base, _irq) \ { \ @@ -165,6 +163,24 @@ static struct resource au1xxx_usb_gdt_resources[] = { }, }; +static struct resource au1xxx_mmc_resources[] = { + [0] = { + .start = SD0_PHYS_ADDR, + .end = SD0_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SD1_PHYS_ADDR, + .end = SD1_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + } +}; + static u64 udc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_gdt_device = { @@ -233,79 +249,16 @@ static struct platform_device au1200_lcd_device = { static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; -extern struct au1xmmc_platform_data au1xmmc_platdata[2]; - -static struct resource au1200_mmc0_resources[] = { - [0] = { - .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = DSCR_CMD0_SDMS_TX0, - .end = DSCR_CMD0_SDMS_TX0, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DSCR_CMD0_SDMS_RX0, - .end = DSCR_CMD0_SDMS_RX0, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device au1200_mmc0_device = { +static struct platform_device au1xxx_mmc_device = { .name = "au1xxx-mmc", .id = 0, .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - .platform_data = &au1xmmc_platdata[0], - }, - .num_resources = ARRAY_SIZE(au1200_mmc0_resources), - .resource = au1200_mmc0_resources, -}; - -#ifndef CONFIG_MIPS_DB1200 -static struct resource au1200_mmc1_resources[] = { - [0] = { - .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = DSCR_CMD0_SDMS_TX1, - .end = DSCR_CMD0_SDMS_TX1, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DSCR_CMD0_SDMS_RX1, - .end = DSCR_CMD0_SDMS_RX1, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device au1200_mmc1_device = { - .name = "au1xxx-mmc", - .id = 1, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - .platform_data = &au1xmmc_platdata[1], + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, }, - .num_resources = ARRAY_SIZE(au1200_mmc1_resources), - .resource = au1200_mmc1_resources, + .num_resources = ARRAY_SIZE(au1xxx_mmc_resources), + .resource = au1xxx_mmc_resources, }; -#endif /* #ifndef CONFIG_MIPS_DB1200 */ #endif /* #ifdef CONFIG_SOC_AU1200 */ static struct platform_device au1x00_pcmcia_device = { @@ -343,10 +296,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_gdt_device, &au1xxx_usb_otg_device, &au1200_lcd_device, - &au1200_mmc0_device, -#ifndef CONFIG_MIPS_DB1200 - &au1200_mmc1_device, -#endif + &au1xxx_mmc_device, #endif #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, diff --git a/trunk/arch/mips/alchemy/pb1200/platform.c b/trunk/arch/mips/alchemy/pb1200/platform.c index 95303297c534..f8fb0aeac571 100644 --- a/trunk/arch/mips/alchemy/pb1200/platform.c +++ b/trunk/arch/mips/alchemy/pb1200/platform.c @@ -20,90 +20,9 @@ #include #include -#include #include #include -#include - -static int mmc_activity; - -static void pb1200mmc0_set_power(void *mmc_host, int state) -{ - if (state) - bcsr->board |= BCSR_BOARD_SD0PWR; - else - bcsr->board &= ~BCSR_BOARD_SD0PWR; - - au_sync_delay(1); -} - -static int pb1200mmc0_card_readonly(void *mmc_host) -{ - return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0; -} - -static int pb1200mmc0_card_inserted(void *mmc_host) -{ - return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0; -} - -static void pb1200_mmcled_set(struct led_classdev *led, - enum led_brightness brightness) -{ - if (brightness != LED_OFF) { - if (++mmc_activity == 1) - bcsr->disk_leds &= ~(1 << 8); - } else { - if (--mmc_activity == 0) - bcsr->disk_leds |= (1 << 8); - } -} - -static struct led_classdev pb1200mmc_led = { - .brightness_set = pb1200_mmcled_set, -}; - -#ifndef CONFIG_MIPS_DB1200 -static void pb1200mmc1_set_power(void *mmc_host, int state) -{ - if (state) - bcsr->board |= BCSR_BOARD_SD1PWR; - else - bcsr->board &= ~BCSR_BOARD_SD1PWR; - - au_sync_delay(1); -} - -static int pb1200mmc1_card_readonly(void *mmc_host) -{ - return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0; -} - -static int pb1200mmc1_card_inserted(void *mmc_host) -{ - return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0; -} -#endif - -const struct au1xmmc_platform_data au1xmmc_platdata[2] = { - [0] = { - .set_power = pb1200mmc0_set_power, - .card_inserted = pb1200mmc0_card_inserted, - .card_readonly = pb1200mmc0_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, -#ifndef CONFIG_MIPS_DB1200 - [1] = { - .set_power = pb1200mmc1_set_power, - .card_inserted = pb1200mmc1_card_inserted, - .card_readonly = pb1200mmc1_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, -#endif -}; static struct resource ide_resources[] = { [0] = { diff --git a/trunk/arch/mips/configs/pnx8335-stb225_defconfig b/trunk/arch/mips/configs/pnx8335-stb225_defconfig deleted file mode 100644 index d9536522cff5..000000000000 --- a/trunk/arch/mips/configs/pnx8335-stb225_defconfig +++ /dev/null @@ -1,1149 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Sat Jul 26 09:02:59 2008 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_BCM47XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_NXP_STB220 is not set -CONFIG_NXP_STB225=y -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_WR_PPMC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_GPIO=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SOC_PNX833X=y -CONFIG_SOC_PNX8335=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2 is not set -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR2=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_128=y -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=128 -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_MMU=y -# CONFIG_PCCARD is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=y -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_NOSWAP is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -CONFIG_MTD_CFI_LE_BYTE_SWAP=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x18000000 -CONFIG_MTD_PHYSMAP_LEN=0x04000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_ATA_SFF=y -# CONFIG_SATA_MV is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_VT_CONSOLE is not set -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PNX8XXX=y -CONFIG_SERIAL_PNX8XXX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Hardware Bus support -# - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=y -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_DVB_CAPTURE_DRIVERS=y -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -CONFIG_DVB_TDA1004X=y -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set -# CONFIG_LOGO is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -# CONFIG_SND_DEBUG_VERBOSE is not set -# CONFIG_SND_PCM_XRUN_DEBUG is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_MIPS=y -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set -CONFIG_USB_SUPPORT=y -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set - -# -# File systems -# -CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=m -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SAMPLES is not set -# CONFIG_KERNEL_TESTS is not set -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=y -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_PRNG is not set -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/trunk/arch/mips/emma/Kconfig b/trunk/arch/mips/emma/Kconfig deleted file mode 100644 index 9669c72123c9..000000000000 --- a/trunk/arch/mips/emma/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -choice - prompt "Machine type" - depends on MACH_EMMA - default NEC_MARKEINS - -config NEC_MARKEINS - bool "NEC EMMA2RH Mark-eins board" - select SOC_EMMA2RH - select HW_HAS_PCI - help - This enables support for the NEC Electronics Mark-eins boards. - -endchoice - -config SOC_EMMA2RH - bool - select SOC_EMMA - select SYS_HAS_CPU_R5500 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - -config SOC_EMMA - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE - select SYS_SUPPORTS_BIG_ENDIAN diff --git a/trunk/arch/mips/emma/markeins/irq.c b/trunk/arch/mips/emma/markeins/irq.c deleted file mode 100644 index c2583ecc93cf..000000000000 --- a/trunk/arch/mips/emma/markeins/irq.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * arch/mips/emma2rh/markeins/irq.c - * This file defines the irq handler for EMMA2RH. - * - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -static void emma2rh_irq_enable(unsigned int irq) -{ - u32 reg_value; - u32 reg_bitmask; - u32 reg_index; - - irq -= EMMA2RH_IRQ_BASE; - - reg_index = EMMA2RH_BHIF_INT_EN_0 + - (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (irq % 32); - emma2rh_out32(reg_index, reg_value | reg_bitmask); -} - -static void emma2rh_irq_disable(unsigned int irq) -{ - u32 reg_value; - u32 reg_bitmask; - u32 reg_index; - - irq -= EMMA2RH_IRQ_BASE; - - reg_index = EMMA2RH_BHIF_INT_EN_0 + - (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (irq % 32); - emma2rh_out32(reg_index, reg_value & ~reg_bitmask); -} - -struct irq_chip emma2rh_irq_controller = { - .name = "emma2rh_irq", - .ack = emma2rh_irq_disable, - .mask = emma2rh_irq_disable, - .mask_ack = emma2rh_irq_disable, - .unmask = emma2rh_irq_enable, -}; - -void emma2rh_irq_init(void) -{ - u32 i; - - for (i = 0; i < NUM_EMMA2RH_IRQ; i++) - set_irq_chip_and_handler(EMMA2RH_IRQ_BASE + i, - &emma2rh_irq_controller, - handle_level_irq); -} - -static void emma2rh_sw_irq_enable(unsigned int irq) -{ - u32 reg; - - irq -= EMMA2RH_SW_IRQ_BASE; - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -static void emma2rh_sw_irq_disable(unsigned int irq) -{ - u32 reg; - - irq -= EMMA2RH_SW_IRQ_BASE; - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -struct irq_chip emma2rh_sw_irq_controller = { - .name = "emma2rh_sw_irq", - .ack = emma2rh_sw_irq_disable, - .mask = emma2rh_sw_irq_disable, - .mask_ack = emma2rh_sw_irq_disable, - .unmask = emma2rh_sw_irq_enable, -}; - -void emma2rh_sw_irq_init(void) -{ - u32 i; - - for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++) - set_irq_chip_and_handler(EMMA2RH_SW_IRQ_BASE + i, - &emma2rh_sw_irq_controller, - handle_level_irq); -} - -static void emma2rh_gpio_irq_enable(unsigned int irq) -{ - u32 reg; - - irq -= EMMA2RH_GPIO_IRQ_BASE; - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -static void emma2rh_gpio_irq_disable(unsigned int irq) -{ - u32 reg; - - irq -= EMMA2RH_GPIO_IRQ_BASE; - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -static void emma2rh_gpio_irq_ack(unsigned int irq) -{ - u32 reg; - - irq -= EMMA2RH_GPIO_IRQ_BASE; - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -static void emma2rh_gpio_irq_end(unsigned int irq) -{ - u32 reg; - - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - - irq -= EMMA2RH_GPIO_IRQ_BASE; - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); - } -} - -struct irq_chip emma2rh_gpio_irq_controller = { - .name = "emma2rh_gpio_irq", - .ack = emma2rh_gpio_irq_ack, - .mask = emma2rh_gpio_irq_disable, - .mask_ack = emma2rh_gpio_irq_ack, - .unmask = emma2rh_gpio_irq_enable, - .end = emma2rh_gpio_irq_end, -}; - -void emma2rh_gpio_irq_init(void) -{ - u32 i; - - for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++) - set_irq_chip(EMMA2RH_GPIO_IRQ_BASE + i, - &emma2rh_gpio_irq_controller); -} - -static struct irqaction irq_cascade = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "cascade", - .dev_id = NULL, - .next = NULL, -}; - -/* - * the first level int-handler will jump here if it is a emma2rh irq - */ -void emma2rh_irq_dispatch(void) -{ - u32 intStatus; - u32 bitmask; - u32 i; - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) & - emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); - -#ifdef EMMA2RH_SW_CASCADE - if (intStatus & - (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { - u32 swIntStatus; - swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) - & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (swIntStatus & bitmask) { - do_IRQ(EMMA2RH_SW_IRQ_BASE + i); - return; - } - } - } -#endif - - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) & - emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); - -#ifdef EMMA2RH_GPIO_CASCADE - if (intStatus & - (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { - u32 gpioIntStatus; - gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) - & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (gpioIntStatus & bitmask) { - do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i); - return; - } - } - } -#endif - - for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) & - emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); - - for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } -} - -void __init arch_init_irq(void) -{ - u32 reg; - - /* by default, interrupts are disabled. */ - emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); - - clear_c0_status(0xff00); - set_c0_status(0x0400); - -#define GPIO_PCI (0xf<<15) - /* setup GPIO interrupt for PCI interface */ - /* direction input */ - reg = emma2rh_in32(EMMA2RH_GPIO_DIR); - emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); - /* disable interrupt */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); - /* level triggerd */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); - emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); - reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); - emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); - /* interrupt clear */ - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); - - /* init all controllers */ - emma2rh_irq_init(); - emma2rh_sw_irq_init(); - emma2rh_gpio_irq_init(); - mips_cpu_irq_init(); - - /* setup cascade interrupts */ - setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); - setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade); - setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(CPU_IRQ_BASE + 7); - else if (pending & STATUSF_IP2) - emma2rh_irq_dispatch(); - else if (pending & STATUSF_IP1) - do_IRQ(CPU_IRQ_BASE + 1); - else if (pending & STATUSF_IP0) - do_IRQ(CPU_IRQ_BASE + 0); - else - spurious_interrupt(); -} diff --git a/trunk/arch/mips/emma/common/Makefile b/trunk/arch/mips/emma2rh/common/Makefile similarity index 88% rename from trunk/arch/mips/emma/common/Makefile rename to trunk/arch/mips/emma2rh/common/Makefile index c392d28c1ef1..859121b3867d 100644 --- a/trunk/arch/mips/emma/common/Makefile +++ b/trunk/arch/mips/emma2rh/common/Makefile @@ -10,4 +10,4 @@ # (at your option) any later version. # -obj-$(CONFIG_NEC_MARKEINS) += prom.o +obj-$(CONFIG_MARKEINS) += irq.o irq_emma2rh.o prom.o diff --git a/trunk/arch/mips/emma2rh/common/irq.c b/trunk/arch/mips/emma2rh/common/irq.c new file mode 100644 index 000000000000..91cbd959ab67 --- /dev/null +++ b/trunk/arch/mips/emma2rh/common/irq.c @@ -0,0 +1,105 @@ +/* + * arch/mips/emma2rh/common/irq.c + * This file is common irq dispatcher. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +/* + * the first level int-handler will jump here if it is a emma2rh irq + */ +void emma2rh_irq_dispatch(void) +{ + u32 intStatus; + u32 bitmask; + u32 i; + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) + & emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); + +#ifdef EMMA2RH_SW_CASCADE + if (intStatus & + (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 swIntStatus; + swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) + & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (swIntStatus & bitmask) { + do_IRQ(EMMA2RH_SW_IRQ_BASE + i); + return; + } + } + } +#endif + + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) + & emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); + +#ifdef EMMA2RH_GPIO_CASCADE + if (intStatus & + (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 gpioIntStatus; + gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) + & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (gpioIntStatus & bitmask) { + do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i); + return; + } + } + } +#endif + + for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) + & emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); + + for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } +} diff --git a/trunk/arch/mips/emma2rh/common/irq_emma2rh.c b/trunk/arch/mips/emma2rh/common/irq_emma2rh.c new file mode 100644 index 000000000000..96df37b77759 --- /dev/null +++ b/trunk/arch/mips/emma2rh/common/irq_emma2rh.c @@ -0,0 +1,106 @@ +/* + * arch/mips/emma2rh/common/irq_emma2rh.c + * This file defines the irq handler for EMMA2RH. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * EMMA2RH defines 64 IRQs. + * + * This file exports one function: + * emma2rh_irq_init(u32 irq_base); + */ + +#include +#include +#include + +#include + +#include + +/* number of total irqs supported by EMMA2RH */ +#define NUM_EMMA2RH_IRQ 96 + +static int emma2rh_irq_base = -1; + +void ll_emma2rh_irq_enable(int); +void ll_emma2rh_irq_disable(int); + +static void emma2rh_irq_enable(unsigned int irq) +{ + ll_emma2rh_irq_enable(irq - emma2rh_irq_base); +} + +static void emma2rh_irq_disable(unsigned int irq) +{ + ll_emma2rh_irq_disable(irq - emma2rh_irq_base); +} + +struct irq_chip emma2rh_irq_controller = { + .name = "emma2rh_irq", + .ack = emma2rh_irq_disable, + .mask = emma2rh_irq_disable, + .mask_ack = emma2rh_irq_disable, + .unmask = emma2rh_irq_enable, +}; + +void emma2rh_irq_init(u32 irq_base) +{ + u32 i; + + for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++) + set_irq_chip_and_handler(i, &emma2rh_irq_controller, + handle_level_irq); + + emma2rh_irq_base = irq_base; +} + +void ll_emma2rh_irq_enable(int emma2rh_irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) + * (emma2rh_irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (emma2rh_irq % 32); + db_assert((reg_value & reg_bitmask) == 0); + emma2rh_out32(reg_index, reg_value | reg_bitmask); +} + +void ll_emma2rh_irq_disable(int emma2rh_irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) + * (emma2rh_irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (emma2rh_irq % 32); + db_assert((reg_value & reg_bitmask) != 0); + emma2rh_out32(reg_index, reg_value & ~reg_bitmask); +} diff --git a/trunk/arch/mips/emma/common/prom.c b/trunk/arch/mips/emma2rh/common/prom.c similarity index 95% rename from trunk/arch/mips/emma/common/prom.c rename to trunk/arch/mips/emma2rh/common/prom.c index 120f53fbdb45..e14a2e3d8842 100644 --- a/trunk/arch/mips/emma/common/prom.c +++ b/trunk/arch/mips/emma2rh/common/prom.c @@ -29,11 +29,11 @@ #include #include -#include +#include const char *get_system_type(void) { -#ifdef CONFIG_NEC_MARKEINS +#if defined(CONFIG_MARKEINS) return "NEC EMMA2RH Mark-eins"; #else #error Unknown NEC board @@ -60,7 +60,7 @@ void __init prom_init(void) strcat(arcs_cmdline, " "); } -#ifdef CONFIG_NEC_MARKEINS +#if defined(CONFIG_MARKEINS) add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM); #else #error Unknown NEC board diff --git a/trunk/arch/mips/emma/markeins/Makefile b/trunk/arch/mips/emma2rh/markeins/Makefile similarity index 85% rename from trunk/arch/mips/emma/markeins/Makefile rename to trunk/arch/mips/emma2rh/markeins/Makefile index 16e0017ba919..14fc268b175c 100644 --- a/trunk/arch/mips/emma/markeins/Makefile +++ b/trunk/arch/mips/emma2rh/markeins/Makefile @@ -10,4 +10,4 @@ # (at your option) any later version. # -obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o +obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o diff --git a/trunk/arch/mips/emma2rh/markeins/irq.c b/trunk/arch/mips/emma2rh/markeins/irq.c new file mode 100644 index 000000000000..6bcf6a06367a --- /dev/null +++ b/trunk/arch/mips/emma2rh/markeins/irq.c @@ -0,0 +1,132 @@ +/* + * arch/mips/emma2rh/markeins/irq.c + * This file defines the irq handler for EMMA2RH. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +/* + * IRQ mapping + * + * 0-7: 8 CPU interrupts + * 0 - software interrupt 0 + * 1 - software interrupt 1 + * 2 - most Vrc5477 interrupts are routed to this pin + * 3 - (optional) some other interrupts routed to this pin for debugg + * 4 - not used + * 5 - not used + * 6 - not used + * 7 - cpu timer (used by default) + * + */ + +extern void emma2rh_sw_irq_init(u32 base); +extern void emma2rh_gpio_irq_init(u32 base); +extern void emma2rh_irq_init(u32 base); +extern void emma2rh_irq_dispatch(void); + +static struct irqaction irq_cascade = { + .handler = no_action, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = "cascade", + .dev_id = NULL, + .next = NULL, +}; + +void __init arch_init_irq(void) +{ + u32 reg; + + db_run(printk("markeins_irq_setup invoked.\n")); + + /* by default, interrupts are disabled. */ + emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); + + clear_c0_status(0xff00); + set_c0_status(0x0400); + +#define GPIO_PCI (0xf<<15) + /* setup GPIO interrupt for PCI interface */ + /* direction input */ + reg = emma2rh_in32(EMMA2RH_GPIO_DIR); + emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); + /* disable interrupt */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); + /* level triggerd */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); + emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); + reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); + emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); + /* interrupt clear */ + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); + + /* init all controllers */ + emma2rh_irq_init(EMMA2RH_IRQ_BASE); + emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE); + emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE); + mips_cpu_irq_init(); + + /* setup cascade interrupts */ + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade); + setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7); + else if (pending & STATUSF_IP2) + emma2rh_irq_dispatch(); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE + 0); + else + spurious_interrupt(); +} + + diff --git a/trunk/arch/mips/emma2rh/markeins/irq_markeins.c b/trunk/arch/mips/emma2rh/markeins/irq_markeins.c new file mode 100644 index 000000000000..fba5c156f472 --- /dev/null +++ b/trunk/arch/mips/emma2rh/markeins/irq_markeins.c @@ -0,0 +1,158 @@ +/* + * arch/mips/emma2rh/markeins/irq_markeins.c + * This file defines the irq handler for Mark-eins. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include + +#include +#include + +static int emma2rh_sw_irq_base = -1; +static int emma2rh_gpio_irq_base = -1; + +void ll_emma2rh_sw_irq_enable(int reg); +void ll_emma2rh_sw_irq_disable(int reg); +void ll_emma2rh_gpio_irq_enable(int reg); +void ll_emma2rh_gpio_irq_disable(int reg); + +static void emma2rh_sw_irq_enable(unsigned int irq) +{ + ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base); +} + +static void emma2rh_sw_irq_disable(unsigned int irq) +{ + ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base); +} + +struct irq_chip emma2rh_sw_irq_controller = { + .name = "emma2rh_sw_irq", + .ack = emma2rh_sw_irq_disable, + .mask = emma2rh_sw_irq_disable, + .mask_ack = emma2rh_sw_irq_disable, + .unmask = emma2rh_sw_irq_enable, +}; + +void emma2rh_sw_irq_init(u32 irq_base) +{ + u32 i; + + for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++) + set_irq_chip_and_handler(i, &emma2rh_sw_irq_controller, + handle_level_irq); + + emma2rh_sw_irq_base = irq_base; +} + +void ll_emma2rh_sw_irq_enable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < NUM_EMMA2RH_IRQ_SW); + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +void ll_emma2rh_sw_irq_disable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < 32); + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +static void emma2rh_gpio_irq_enable(unsigned int irq) +{ + ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); +} + +static void emma2rh_gpio_irq_disable(unsigned int irq) +{ + ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base); +} + +static void emma2rh_gpio_irq_ack(unsigned int irq) +{ + irq -= emma2rh_gpio_irq_base; + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); + ll_emma2rh_gpio_irq_disable(irq); +} + +static void emma2rh_gpio_irq_end(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); +} + +struct irq_chip emma2rh_gpio_irq_controller = { + .name = "emma2rh_gpio_irq", + .ack = emma2rh_gpio_irq_ack, + .mask = emma2rh_gpio_irq_disable, + .mask_ack = emma2rh_gpio_irq_ack, + .unmask = emma2rh_gpio_irq_enable, + .end = emma2rh_gpio_irq_end, +}; + +void emma2rh_gpio_irq_init(u32 irq_base) +{ + u32 i; + + for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++) + set_irq_chip(i, &emma2rh_gpio_irq_controller); + + emma2rh_gpio_irq_base = irq_base; +} + +void ll_emma2rh_gpio_irq_enable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +void ll_emma2rh_gpio_irq_disable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} diff --git a/trunk/arch/mips/emma/markeins/led.c b/trunk/arch/mips/emma2rh/markeins/led.c similarity index 97% rename from trunk/arch/mips/emma/markeins/led.c rename to trunk/arch/mips/emma2rh/markeins/led.c index 377a181b6561..b65254c1bfe9 100644 --- a/trunk/arch/mips/emma/markeins/led.c +++ b/trunk/arch/mips/emma2rh/markeins/led.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include const unsigned long clear = 0x20202020; diff --git a/trunk/arch/mips/emma/markeins/platform.c b/trunk/arch/mips/emma2rh/markeins/platform.c similarity index 99% rename from trunk/arch/mips/emma/markeins/platform.c rename to trunk/arch/mips/emma2rh/markeins/platform.c index 88e87f6b3442..fb9cda253ab0 100644 --- a/trunk/arch/mips/emma/markeins/platform.c +++ b/trunk/arch/mips/emma2rh/markeins/platform.c @@ -36,7 +36,7 @@ #include #include -#include +#include #define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */ diff --git a/trunk/arch/mips/emma/markeins/setup.c b/trunk/arch/mips/emma2rh/markeins/setup.c similarity index 99% rename from trunk/arch/mips/emma/markeins/setup.c rename to trunk/arch/mips/emma2rh/markeins/setup.c index 67f456500084..b6a23ad539f8 100644 --- a/trunk/arch/mips/emma/markeins/setup.c +++ b/trunk/arch/mips/emma2rh/markeins/setup.c @@ -29,7 +29,7 @@ #include #include -#include +#include #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ diff --git a/trunk/arch/mips/include/asm/emma/emma2rh.h b/trunk/arch/mips/include/asm/emma2rh/emma2rh.h similarity index 97% rename from trunk/arch/mips/include/asm/emma/emma2rh.h rename to trunk/arch/mips/include/asm/emma2rh/emma2rh.h index 30aea91de626..6a1af0af51e3 100644 --- a/trunk/arch/mips/include/asm/emma/emma2rh.h +++ b/trunk/arch/mips/include/asm/emma2rh/emma2rh.h @@ -1,5 +1,5 @@ /* - * arch/mips/include/asm/emma/emma2rh.h + * include/asm-mips/emma2rh/emma2rh.h * This file is EMMA2RH common header. * * Copyright (C) NEC Electronics Corporation 2005-2006 @@ -21,8 +21,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_EMMA_EMMA2RH_H -#define __ASM_EMMA_EMMA2RH_H +#ifndef __ASM_EMMA2RH_EMMA2RH_H +#define __ASM_EMMA2RH_EMMA2RH_H #include @@ -206,6 +206,7 @@ static inline void emma2rh_out32(u32 offset, u32 val) static inline u32 emma2rh_in32(u32 offset) { u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); return val; } @@ -218,6 +219,7 @@ static inline void emma2rh_out16(u32 offset, u16 val) static inline u16 emma2rh_in16(u32 offset) { u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); return val; } @@ -230,6 +232,7 @@ static inline void emma2rh_out8(u32 offset, u8 val) static inline u8 emma2rh_in8(u32 offset) { u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); return val; } @@ -321,10 +324,10 @@ static inline u8 emma2rh_in8(u32 offset) /* * include the board dependent part */ -#ifdef CONFIG_NEC_MARKEINS -#include +#if defined(CONFIG_MARKEINS) +#include #else #error "Unknown EMMA2RH board!" #endif -#endif /* __ASM_EMMA_EMMA2RH_H */ +#endif /* __ASM_EMMA2RH_EMMA2RH_H */ diff --git a/trunk/arch/mips/include/asm/emma/markeins.h b/trunk/arch/mips/include/asm/emma2rh/markeins.h similarity index 100% rename from trunk/arch/mips/include/asm/emma/markeins.h rename to trunk/arch/mips/include/asm/emma2rh/markeins.h diff --git a/trunk/arch/mips/include/asm/mach-lemote/pci.h b/trunk/arch/mips/include/asm/mach-lemote/pci.h deleted file mode 100644 index ea6aa143b78e..000000000000 --- a/trunk/arch/mips/include/asm/mach-lemote/pci.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (c) 2008 Zhang Le - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA - * 02139, USA. - */ - -#ifndef _LEMOTE_PCI_H_ -#define _LEMOTE_PCI_H_ - -#define LOONGSON2E_PCI_MEM_START 0x14000000UL -#define LOONGSON2E_PCI_MEM_END 0x1fffffffUL -#define LOONGSON2E_PCI_IO_START 0x00004000UL -#define LOONGSON2E_IO_PORT_BASE 0x1fd00000UL - -#endif /* !_LEMOTE_PCI_H_ */ diff --git a/trunk/arch/mips/include/asm/mach-pnx833x/gpio.h b/trunk/arch/mips/include/asm/mach-pnx833x/gpio.h deleted file mode 100644 index 8de0eb9c98a3..000000000000 --- a/trunk/arch/mips/include/asm/mach-pnx833x/gpio.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * gpio.h: GPIO Support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H -#define __ASM_MIPS_MACH_PNX833X_GPIO_H - -/* BIG FAT WARNING: races danger! - No protections exist here. Current users are only early init code, - when locking is not needed because no cuncurency yet exists there, - and GPIO IRQ dispatcher, which does locking. - However, if many uses will ever happen, proper locking will be needed - - including locking between different uses -*/ - -#include "pnx833x.h" - -#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0) -#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0) - -/* Initialize GPIO to a known state */ -static inline void pnx833x_gpio_init(void) -{ - PNX833X_PIO_DIR = 0; - PNX833X_PIO_DIR2 = 0; - PNX833X_PIO_SEL = 0; - PNX833X_PIO_SEL2 = 0; - PNX833X_PIO_INT_EDGE = 0; - PNX833X_PIO_INT_HI = 0; - PNX833X_PIO_INT_LO = 0; - - /* clear any GPIO interrupt requests */ - PNX833X_PIO_INT_CLEAR = 0xffff; - PNX833X_PIO_INT_CLEAR = 0; - PNX833X_PIO_INT_ENABLE = 0; -} - -/* Select GPIO direction for a pin */ -static inline void pnx833x_gpio_select_input(unsigned int pin) -{ - if (pin < 32) - CLEAR_REG_BIT(PNX833X_PIO_DIR, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31); -} -static inline void pnx833x_gpio_select_output(unsigned int pin) -{ - if (pin < 32) - SET_REG_BIT(PNX833X_PIO_DIR, pin); - else - SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31); -} - -/* Select GPIO or alternate function for a pin */ -static inline void pnx833x_gpio_select_function_io(unsigned int pin) -{ - if (pin < 32) - CLEAR_REG_BIT(PNX833X_PIO_SEL, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31); -} -static inline void pnx833x_gpio_select_function_alt(unsigned int pin) -{ - if (pin < 32) - SET_REG_BIT(PNX833X_PIO_SEL, pin); - else - SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31); -} - -/* Read GPIO pin */ -static inline int pnx833x_gpio_read(unsigned int pin) -{ - if (pin < 32) - return (PNX833X_PIO_IN >> pin) & 1; - else - return (PNX833X_PIO_IN2 >> (pin & 31)) & 1; -} - -/* Write GPIO pin */ -static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin) -{ - if (pin < 32) { - if (val) - SET_REG_BIT(PNX833X_PIO_OUT, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_OUT, pin); - } else { - if (val) - SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31); - else - CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31); - } -} - -/* Configure GPIO interrupt */ -#define GPIO_INT_NONE 0 -#define GPIO_INT_LEVEL_LOW 1 -#define GPIO_INT_LEVEL_HIGH 2 -#define GPIO_INT_EDGE_RISING 3 -#define GPIO_INT_EDGE_FALLING 4 -#define GPIO_INT_EDGE_BOTH 5 -static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin) -{ - switch (when) { - case GPIO_INT_LEVEL_LOW: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_LEVEL_HIGH: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_RISING: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_FALLING: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_BOTH: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - default: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - } -} - -/* Enable/disable GPIO interrupt */ -static inline void pnx833x_gpio_enable_irq(unsigned int pin) -{ - SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); -} -static inline void pnx833x_gpio_disable_irq(unsigned int pin) -{ - CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); -} - -/* Clear GPIO interrupt request */ -static inline void pnx833x_gpio_clear_irq(unsigned int pin) -{ - SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); -} - -#endif diff --git a/trunk/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/trunk/arch/mips/include/asm/mach-pnx833x/irq-mapping.h deleted file mode 100644 index 657f089b1724..000000000000 --- a/trunk/arch/mips/include/asm/mach-pnx833x/irq-mapping.h +++ /dev/null @@ -1,126 +0,0 @@ - -/* - * irq.h: IRQ mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H -#define __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H -/* - * The "IRQ numbers" are completely virtual. - * - * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. - * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, - * numbers 49..64 for (virtual) GPIO interrupts. - * - * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, - * connected to PIC, which uses core hardware interrupt 2, and also - * a timer interrupt through hardware interrupt 5. - * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, - * numbers 65..80 for (virtual) GPIO interrupts. - * - */ -#include - -#define PNX833X_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) - -/* Interrupts supported by PIC */ -#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1) -#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2) -#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3) -#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4) -#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5) -#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6) -#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7) -#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8) -#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9) -#define PNX833X_PIC_CONFIG_INT (PNX833X_PIC_IRQ_BASE + 10) -#define PNX833X_PIC_AOI_INT (PNX833X_PIC_IRQ_BASE + 11) -#define PNX833X_PIC_SYNC_INT (PNX833X_PIC_IRQ_BASE + 12) -#define PNX8330_PIC_SPU_INT (PNX833X_PIC_IRQ_BASE + 13) -#define PNX8335_PIC_SATA_INT (PNX833X_PIC_IRQ_BASE + 13) -#define PNX833X_PIC_OSD_INT (PNX833X_PIC_IRQ_BASE + 14) -#define PNX833X_PIC_DISP1_INT (PNX833X_PIC_IRQ_BASE + 15) -#define PNX833X_PIC_DEINTERLACER_INT (PNX833X_PIC_IRQ_BASE + 16) -#define PNX833X_PIC_DISPLAY2_INT (PNX833X_PIC_IRQ_BASE + 17) -#define PNX833X_PIC_VC_INT (PNX833X_PIC_IRQ_BASE + 18) -#define PNX833X_PIC_SC_INT (PNX833X_PIC_IRQ_BASE + 19) -#define PNX833X_PIC_IDE_INT (PNX833X_PIC_IRQ_BASE + 20) -#define PNX833X_PIC_IDE_DMA_INT (PNX833X_PIC_IRQ_BASE + 21) -#define PNX833X_PIC_TS_IN1_DV_INT (PNX833X_PIC_IRQ_BASE + 22) -#define PNX833X_PIC_TS_IN1_DMA_INT (PNX833X_PIC_IRQ_BASE + 23) -#define PNX833X_PIC_SGDX_DMA_INT (PNX833X_PIC_IRQ_BASE + 24) -#define PNX833X_PIC_TS_OUT_INT (PNX833X_PIC_IRQ_BASE + 25) -#define PNX833X_PIC_IR_INT (PNX833X_PIC_IRQ_BASE + 26) -#define PNX833X_PIC_VMSP1_INT (PNX833X_PIC_IRQ_BASE + 27) -#define PNX833X_PIC_VMSP2_INT (PNX833X_PIC_IRQ_BASE + 28) -#define PNX833X_PIC_PIBC_INT (PNX833X_PIC_IRQ_BASE + 29) -#define PNX833X_PIC_TS_IN0_TRD_INT (PNX833X_PIC_IRQ_BASE + 30) -#define PNX833X_PIC_SGDX_TPD_INT (PNX833X_PIC_IRQ_BASE + 31) -#define PNX833X_PIC_USB_INT (PNX833X_PIC_IRQ_BASE + 32) -#define PNX833X_PIC_TS_IN1_TRD_INT (PNX833X_PIC_IRQ_BASE + 33) -#define PNX833X_PIC_CLOCK_INT (PNX833X_PIC_IRQ_BASE + 34) -#define PNX833X_PIC_SGDX_PARSER_INT (PNX833X_PIC_IRQ_BASE + 35) -#define PNX833X_PIC_VMSP_DMA_INT (PNX833X_PIC_IRQ_BASE + 36) - -#if defined(CONFIG_SOC_PNX8335) -#define PNX8335_PIC_MIU_INT (PNX833X_PIC_IRQ_BASE + 37) -#define PNX8335_PIC_AVCHIP_IRQ_INT (PNX833X_PIC_IRQ_BASE + 38) -#define PNX8335_PIC_SYNC_HD_INT (PNX833X_PIC_IRQ_BASE + 39) -#define PNX8335_PIC_DISP_HD_INT (PNX833X_PIC_IRQ_BASE + 40) -#define PNX8335_PIC_DISP_SCALER_INT (PNX833X_PIC_IRQ_BASE + 41) -#define PNX8335_PIC_OSD_HD1_INT (PNX833X_PIC_IRQ_BASE + 42) -#define PNX8335_PIC_DTL_WRITER_Y_INT (PNX833X_PIC_IRQ_BASE + 43) -#define PNX8335_PIC_DTL_WRITER_C_INT (PNX833X_PIC_IRQ_BASE + 44) -#define PNX8335_PIC_DTL_EMULATOR_Y_IR_INT (PNX833X_PIC_IRQ_BASE + 45) -#define PNX8335_PIC_DTL_EMULATOR_C_IR_INT (PNX833X_PIC_IRQ_BASE + 46) -#define PNX8335_PIC_DENC_TTX_INT (PNX833X_PIC_IRQ_BASE + 47) -#define PNX8335_PIC_MMI_SIF0_INT (PNX833X_PIC_IRQ_BASE + 48) -#define PNX8335_PIC_MMI_SIF1_INT (PNX833X_PIC_IRQ_BASE + 49) -#define PNX8335_PIC_MMI_CDMMU_INT (PNX833X_PIC_IRQ_BASE + 50) -#define PNX8335_PIC_PIBCS_INT (PNX833X_PIC_IRQ_BASE + 51) -#define PNX8335_PIC_ETHERNET_INT (PNX833X_PIC_IRQ_BASE + 52) -#define PNX8335_PIC_VMSP1_0_INT (PNX833X_PIC_IRQ_BASE + 53) -#define PNX8335_PIC_VMSP1_1_INT (PNX833X_PIC_IRQ_BASE + 54) -#define PNX8335_PIC_VMSP1_DMA_INT (PNX833X_PIC_IRQ_BASE + 55) -#define PNX8335_PIC_TDGR_DE_INT (PNX833X_PIC_IRQ_BASE + 56) -#define PNX8335_PIC_IR1_IRQ_INT (PNX833X_PIC_IRQ_BASE + 57) -#endif - -/* GPIO interrupts */ -#define PNX833X_GPIO_0_INT (PNX833X_GPIO_IRQ_BASE + 0) -#define PNX833X_GPIO_1_INT (PNX833X_GPIO_IRQ_BASE + 1) -#define PNX833X_GPIO_2_INT (PNX833X_GPIO_IRQ_BASE + 2) -#define PNX833X_GPIO_3_INT (PNX833X_GPIO_IRQ_BASE + 3) -#define PNX833X_GPIO_4_INT (PNX833X_GPIO_IRQ_BASE + 4) -#define PNX833X_GPIO_5_INT (PNX833X_GPIO_IRQ_BASE + 5) -#define PNX833X_GPIO_6_INT (PNX833X_GPIO_IRQ_BASE + 6) -#define PNX833X_GPIO_7_INT (PNX833X_GPIO_IRQ_BASE + 7) -#define PNX833X_GPIO_8_INT (PNX833X_GPIO_IRQ_BASE + 8) -#define PNX833X_GPIO_9_INT (PNX833X_GPIO_IRQ_BASE + 9) -#define PNX833X_GPIO_10_INT (PNX833X_GPIO_IRQ_BASE + 10) -#define PNX833X_GPIO_11_INT (PNX833X_GPIO_IRQ_BASE + 11) -#define PNX833X_GPIO_12_INT (PNX833X_GPIO_IRQ_BASE + 12) -#define PNX833X_GPIO_13_INT (PNX833X_GPIO_IRQ_BASE + 13) -#define PNX833X_GPIO_14_INT (PNX833X_GPIO_IRQ_BASE + 14) -#define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15) - -#endif - diff --git a/trunk/arch/mips/include/asm/mach-pnx833x/irq.h b/trunk/arch/mips/include/asm/mach-pnx833x/irq.h deleted file mode 100644 index 745114b1d8d5..000000000000 --- a/trunk/arch/mips/include/asm/mach-pnx833x/irq.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * irq.h: IRQ mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_H -#define __ASM_MIPS_MACH_PNX833X_IRQ_H -/* - * The "IRQ numbers" are completely virtual. - * - * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. - * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, - * numbers 49..64 for (virtual) GPIO interrupts. - * - * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, - * connected to PIC, which uses core hardware interrupt 2, and also - * a timer interrupt through hardware interrupt 5. - * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, - * numbers 65..80 for (virtual) GPIO interrupts. - * - */ -#if defined(CONFIG_SOC_PNX8335) - #define PNX833X_PIC_NUM_IRQ 58 -#else - #define PNX833X_PIC_NUM_IRQ 37 -#endif - -#define MIPS_CPU_NUM_IRQ 8 -#define PNX833X_GPIO_NUM_IRQ 16 - -#define MIPS_CPU_IRQ_BASE 0 -#define PNX833X_PIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_NUM_IRQ) -#define PNX833X_GPIO_IRQ_BASE (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ) -#define NR_IRQS (MIPS_CPU_NUM_IRQ + PNX833X_PIC_NUM_IRQ + PNX833X_GPIO_NUM_IRQ) - -#endif diff --git a/trunk/arch/mips/include/asm/mach-pnx833x/pnx833x.h b/trunk/arch/mips/include/asm/mach-pnx833x/pnx833x.h deleted file mode 100644 index 100f52870e3c..000000000000 --- a/trunk/arch/mips/include/asm/mach-pnx833x/pnx833x.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * pnx833x.h: Register mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_MIPS_MACH_PNX833X_PNX833X_H -#define __ASM_MIPS_MACH_PNX833X_PNX833X_H - -/* All regs are accessed in KSEG1 */ -#define PNX833X_BASE (0xa0000000ul + 0x17E00000ul) - -#define PNX833X_REG(offs) (*((volatile unsigned long *)(PNX833X_BASE + offs))) - -/* Registers are named exactly as in PNX833X docs, just with PNX833X_ prefix */ - -/* Read access to multibit fields */ -#define PNX833X_BIT(val, reg, field) ((val) & PNX833X_##reg##_##field) -#define PNX833X_REGBIT(reg, field) PNX833X_BIT(PNX833X_##reg, reg, field) - -/* Use PNX833X_FIELD to extract a field from val */ -#define PNX_FIELD(cpu, val, reg, field) \ - (((val) & PNX##cpu##_##reg##_##field##_MASK) >> \ - PNX##cpu##_##reg##_##field##_SHIFT) -#define PNX833X_FIELD(val, reg, field) PNX_FIELD(833X, val, reg, field) -#define PNX8330_FIELD(val, reg, field) PNX_FIELD(8330, val, reg, field) -#define PNX8335_FIELD(val, reg, field) PNX_FIELD(8335, val, reg, field) - -/* Use PNX833X_REGFIELD to extract a field from a register */ -#define PNX833X_REGFIELD(reg, field) PNX833X_FIELD(PNX833X_##reg, reg, field) -#define PNX8330_REGFIELD(reg, field) PNX8330_FIELD(PNX8330_##reg, reg, field) -#define PNX8335_REGFIELD(reg, field) PNX8335_FIELD(PNX8335_##reg, reg, field) - - -#define PNX_WRITEFIELD(cpu, val, reg, field) \ - (PNX##cpu##_##reg = (PNX##cpu##_##reg & ~(PNX##cpu##_##reg##_##field##_MASK)) | \ - ((val) << PNX##cpu##_##reg##_##field##_SHIFT)) -#define PNX833X_WRITEFIELD(val, reg, field) \ - PNX_WRITEFIELD(833X, val, reg, field) -#define PNX8330_WRITEFIELD(val, reg, field) \ - PNX_WRITEFIELD(8330, val, reg, field) -#define PNX8335_WRITEFIELD(val, reg, field) \ - PNX_WRITEFIELD(8335, val, reg, field) - - -/* Macros to detect CPU type */ - -#define PNX833X_CONFIG_MODULE_ID PNX833X_REG(0x7FFC) -#define PNX833X_CONFIG_MODULE_ID_MAJREV_MASK 0x0000f000 -#define PNX833X_CONFIG_MODULE_ID_MAJREV_SHIFT 12 -#define PNX8330_CONFIG_MODULE_MAJREV 4 -#define PNX8335_CONFIG_MODULE_MAJREV 5 -#define CPU_IS_PNX8330 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ - PNX8330_CONFIG_MODULE_MAJREV) -#define CPU_IS_PNX8335 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ - PNX8335_CONFIG_MODULE_MAJREV) - - - -#define PNX833X_RESET_CONTROL PNX833X_REG(0x8004) -#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014) - -#define PNX833X_PIC_REG(offs) PNX833X_REG(0x01000 + (offs)) -#define PNX833X_PIC_INT_PRIORITY PNX833X_PIC_REG(0x0) -#define PNX833X_PIC_INT_SRC PNX833X_PIC_REG(0x4) -#define PNX833X_PIC_INT_SRC_INT_SRC_MASK 0x00000FF8ul /* bits 11:3 */ -#define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT 3 -#define PNX833X_PIC_INT_REG(irq) PNX833X_PIC_REG(0x10 + 4*(irq)) - -#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228) -#define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET 0x00000002ul /* bit 1 */ -#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK 0x00000018ul /* bits 4:3 */ -#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3 - -#define PNX8335_CLOCK_PLL_CPU_CTL PNX833X_REG(0x9020) -#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK 0x1f -#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_SHIFT 0 - -#define PNX833X_CONFIG_MUX PNX833X_REG(0x7004) -#define PNX833X_CONFIG_MUX_IDE_MUX 0x00000080 /* bit 7 */ - -#define PNX8330_CONFIG_POLYFUSE_7 PNX833X_REG(0x7040) -#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_MASK 0x00180000 -#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_SHIFT 19 - -#define PNX833X_PIO_IN PNX833X_REG(0xF000) -#define PNX833X_PIO_OUT PNX833X_REG(0xF004) -#define PNX833X_PIO_DIR PNX833X_REG(0xF008) -#define PNX833X_PIO_SEL PNX833X_REG(0xF014) -#define PNX833X_PIO_INT_EDGE PNX833X_REG(0xF020) -#define PNX833X_PIO_INT_HI PNX833X_REG(0xF024) -#define PNX833X_PIO_INT_LO PNX833X_REG(0xF028) -#define PNX833X_PIO_INT_STATUS PNX833X_REG(0xFFE0) -#define PNX833X_PIO_INT_ENABLE PNX833X_REG(0xFFE4) -#define PNX833X_PIO_INT_CLEAR PNX833X_REG(0xFFE8) -#define PNX833X_PIO_IN2 PNX833X_REG(0xF05C) -#define PNX833X_PIO_OUT2 PNX833X_REG(0xF060) -#define PNX833X_PIO_DIR2 PNX833X_REG(0xF064) -#define PNX833X_PIO_SEL2 PNX833X_REG(0xF068) - -#define PNX833X_UART0_PORTS_START (PNX833X_BASE + 0xB000) -#define PNX833X_UART0_PORTS_END (PNX833X_BASE + 0xBFFF) -#define PNX833X_UART1_PORTS_START (PNX833X_BASE + 0xC000) -#define PNX833X_UART1_PORTS_END (PNX833X_BASE + 0xCFFF) - -#define PNX833X_USB_PORTS_START (PNX833X_BASE + 0x19000) -#define PNX833X_USB_PORTS_END (PNX833X_BASE + 0x19FFF) - -#define PNX833X_CONFIG_USB PNX833X_REG(0x7008) - -#define PNX833X_I2C0_PORTS_START (PNX833X_BASE + 0xD000) -#define PNX833X_I2C0_PORTS_END (PNX833X_BASE + 0xDFFF) -#define PNX833X_I2C1_PORTS_START (PNX833X_BASE + 0xE000) -#define PNX833X_I2C1_PORTS_END (PNX833X_BASE + 0xEFFF) - -#define PNX833X_IDE_PORTS_START (PNX833X_BASE + 0x1A000) -#define PNX833X_IDE_PORTS_END (PNX833X_BASE + 0x1AFFF) -#define PNX833X_IDE_MODULE_ID PNX833X_REG(0x1AFFC) - -#define PNX833X_IDE_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 -#define PNX833X_IDE_MODULE_ID_MODULE_ID_SHIFT 16 -#define PNX833X_IDE_MODULE_ID_VALUE 0xA009 - - -#define PNX833X_MIU_SEL0 PNX833X_REG(0x2004) -#define PNX833X_MIU_SEL0_TIMING PNX833X_REG(0x2008) -#define PNX833X_MIU_SEL1 PNX833X_REG(0x200C) -#define PNX833X_MIU_SEL1_TIMING PNX833X_REG(0x2010) -#define PNX833X_MIU_SEL2 PNX833X_REG(0x2014) -#define PNX833X_MIU_SEL2_TIMING PNX833X_REG(0x2018) -#define PNX833X_MIU_SEL3 PNX833X_REG(0x201C) -#define PNX833X_MIU_SEL3_TIMING PNX833X_REG(0x2020) - -#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK (1 << 14) -#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT 14 - -#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7) -#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT 7 - -#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK (0xF << 9) -#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_SHIFT 9 - -#define PNX833X_MIU_CONFIG_SPI PNX833X_REG(0x2000) - -#define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK (0xFF << 3) -#define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT 3 - -#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2) -#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT 2 - -#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1) -#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT 1 - -#define PNX833X_MIU_CONFIG_SPI_SYNC_MASK (1 << 0) -#define PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT 0 - -#define PNX833X_WRITE_CONFIG_SPI(opcode, data_enable, addr_enable, sync) \ - (PNX833X_MIU_CONFIG_SPI = \ - ((opcode) << PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT) | \ - ((data_enable) << PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT) | \ - ((addr_enable) << PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT) | \ - ((sync) << PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT)) - -#define PNX8335_IP3902_PORTS_START (PNX833X_BASE + 0x2F000) -#define PNX8335_IP3902_PORTS_END (PNX833X_BASE + 0x2FFFF) -#define PNX8335_IP3902_MODULE_ID PNX833X_REG(0x2FFFC) - -#define PNX8335_IP3902_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 -#define PNX8335_IP3902_MODULE_ID_MODULE_ID_SHIFT 16 -#define PNX8335_IP3902_MODULE_ID_VALUE 0x3902 - - /* I/O location(gets remapped)*/ -#define PNX8335_NAND_BASE 0x18000000 -/* I/O location with CLE high */ -#define PNX8335_NAND_CLE_MASK 0x00100000 -/* I/O location with ALE high */ -#define PNX8335_NAND_ALE_MASK 0x00010000 - -#define PNX8335_SATA_PORTS_START (PNX833X_BASE + 0x2E000) -#define PNX8335_SATA_PORTS_END (PNX833X_BASE + 0x2EFFF) -#define PNX8335_SATA_MODULE_ID PNX833X_REG(0x2EFFC) - -#define PNX8335_SATA_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 -#define PNX8335_SATA_MODULE_ID_MODULE_ID_SHIFT 16 -#define PNX8335_SATA_MODULE_ID_VALUE 0xA099 - -#endif diff --git a/trunk/arch/mips/include/asm/mach-pnx833x/war.h b/trunk/arch/mips/include/asm/mach-pnx833x/war.h deleted file mode 100644 index 82cd1e97bc2e..000000000000 --- a/trunk/arch/mips/include/asm/mach-pnx833x/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_PNX833X_WAR_H -#define __ASM_MIPS_MACH_PNX833X_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ diff --git a/trunk/arch/mips/include/asm/mach-tx49xx/mangle-port.h b/trunk/arch/mips/include/asm/mach-tx49xx/mangle-port.h deleted file mode 100644 index 5e6912fdd0ed..000000000000 --- a/trunk/arch/mips/include/asm/mach-tx49xx/mangle-port.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_MACH_TX49XX_MANGLE_PORT_H -#define __ASM_MACH_TX49XX_MANGLE_PORT_H - -#define __swizzle_addr_b(port) (port) -#define __swizzle_addr_w(port) (port) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -#define ioswabb(a, x) (x) -#define __mem_ioswabb(a, x) (x) -#if defined(CONFIG_TOSHIBA_RBTX4939) && \ - (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) && \ - defined(__BIG_ENDIAN) -#define NEEDS_TXX9_IOSWABW -extern u16 (*ioswabw)(volatile u16 *a, u16 x); -extern u16 (*__mem_ioswabw)(volatile u16 *a, u16 x); -#else -#define ioswabw(a, x) le16_to_cpu(x) -#define __mem_ioswabw(a, x) (x) -#endif -#define ioswabl(a, x) le32_to_cpu(x) -#define __mem_ioswabl(a, x) (x) -#define ioswabq(a, x) le64_to_cpu(x) -#define __mem_ioswabq(a, x) (x) - -#endif /* __ASM_MACH_TX49XX_MANGLE_PORT_H */ diff --git a/trunk/arch/mips/include/asm/mipsregs.h b/trunk/arch/mips/include/asm/mipsregs.h index 9316324d070d..979866000da4 100644 --- a/trunk/arch/mips/include/asm/mipsregs.h +++ b/trunk/arch/mips/include/asm/mipsregs.h @@ -192,7 +192,6 @@ #define PM_16M 0x01ffe000 #define PM_64M 0x07ffe000 #define PM_256M 0x1fffe000 -#define PM_1G 0x7fffe000 #endif diff --git a/trunk/arch/mips/include/asm/module.h b/trunk/arch/mips/include/asm/module.h index e2e09b2cd265..de6d09ebbd80 100644 --- a/trunk/arch/mips/include/asm/module.h +++ b/trunk/arch/mips/include/asm/module.h @@ -98,8 +98,6 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "R5000 " #elif defined CONFIG_CPU_R5432 #define MODULE_PROC_FAMILY "R5432 " -#elif defined CONFIG_CPU_R5500 -#define MODULE_PROC_FAMILY "R5500 " #elif defined CONFIG_CPU_R6000 #define MODULE_PROC_FAMILY "R6000 " #elif defined CONFIG_CPU_NEVADA diff --git a/trunk/arch/mips/include/asm/ptrace.h b/trunk/arch/mips/include/asm/ptrace.h index 813abd16255d..9c22571b160d 100644 --- a/trunk/arch/mips/include/asm/ptrace.h +++ b/trunk/arch/mips/include/asm/ptrace.h @@ -80,25 +80,25 @@ enum pt_watch_style { pt_watch_style_mips64 }; struct mips32_watch_regs { - unsigned int watchlo[8]; + uint32_t watchlo[8]; /* Lower 16 bits of watchhi. */ - unsigned short watchhi[8]; + uint16_t watchhi[8]; /* Valid mask and I R W bits. * bit 0 -- 1 if W bit is usable. * bit 1 -- 1 if R bit is usable. * bit 2 -- 1 if I bit is usable. * bits 3 - 11 -- Valid watchhi mask bits. */ - unsigned short watch_masks[8]; + uint16_t watch_masks[8]; /* The number of valid watch register pairs. */ - unsigned int num_valid; + uint32_t num_valid; } __attribute__((aligned(8))); struct mips64_watch_regs { - unsigned long long watchlo[8]; - unsigned short watchhi[8]; - unsigned short watch_masks[8]; - unsigned int num_valid; + uint64_t watchlo[8]; + uint16_t watchhi[8]; + uint16_t watch_masks[8]; + uint32_t num_valid; } __attribute__((aligned(8))); struct pt_watch_regs { @@ -116,7 +116,6 @@ struct pt_watch_regs { #include #include -#include #include struct task_struct; diff --git a/trunk/arch/mips/include/asm/txx9/generic.h b/trunk/arch/mips/include/asm/txx9/generic.h index 9cde0090cbf6..4316a3e57678 100644 --- a/trunk/arch/mips/include/asm/txx9/generic.h +++ b/trunk/arch/mips/include/asm/txx9/generic.h @@ -86,9 +86,4 @@ void txx9_iocled_init(unsigned long baseaddr, int basenum, unsigned int num, int lowactive, const char *color, char **deftriggers); -/* 7SEG LED */ -void txx9_7segled_init(unsigned int num, - void (*putc)(unsigned int pos, unsigned char val)); -int txx9_7segled_putc(unsigned int pos, char c); - #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/trunk/arch/mips/kernel/Makefile b/trunk/arch/mips/kernel/Makefile index b1372c27f136..d9da7112aaf8 100644 --- a/trunk/arch/mips/kernel/Makefile +++ b/trunk/arch/mips/kernel/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o -obj-$(CONFIG_CPU_R5500) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o diff --git a/trunk/arch/mips/kernel/scall32-o32.S b/trunk/arch/mips/kernel/scall32-o32.S index 759f68066b5d..5e75a316f6b1 100644 --- a/trunk/arch/mips/kernel/scall32-o32.S +++ b/trunk/arch/mips/kernel/scall32-o32.S @@ -180,7 +180,7 @@ bad_stack: * The system call does not exist in this kernel */ illegal_syscall: - li v0, ENOSYS # error + li v0, -ENOSYS # error sw v0, PT_R2(sp) li t0, 1 # set error flag sw t0, PT_R7(sp) @@ -293,7 +293,7 @@ bad_alignment: jr t2 /* Unreached */ -einval: li v0, -ENOSYS +einval: li v0, -EINVAL jr ra END(sys_syscall) diff --git a/trunk/arch/mips/kernel/scall64-64.S b/trunk/arch/mips/kernel/scall64-64.S index a9e171618994..3d58204c9d44 100644 --- a/trunk/arch/mips/kernel/scall64-64.S +++ b/trunk/arch/mips/kernel/scall64-64.S @@ -117,7 +117,7 @@ syscall_trace_entry: illegal_syscall: /* This also isn't a 64-bit syscall, throw an error. */ - li v0, ENOSYS # error + li v0, -ENOSYS # error sd v0, PT_R2(sp) li t0, 1 # set error flag sd t0, PT_R7(sp) diff --git a/trunk/arch/mips/kernel/setup.c b/trunk/arch/mips/kernel/setup.c index 4430a1f8fdf1..16f8edfe5cdc 100644 --- a/trunk/arch/mips/kernel/setup.c +++ b/trunk/arch/mips/kernel/setup.c @@ -601,8 +601,8 @@ static int __init debugfs_mips(void) struct dentry *d; d = debugfs_create_dir("mips", NULL); - if (!d) - return -ENOMEM; + if (IS_ERR(d)) + return PTR_ERR(d); mips_debugfs_dir = d; return 0; } diff --git a/trunk/arch/mips/kernel/smp.c b/trunk/arch/mips/kernel/smp.c index b79ea7055ec3..7b59cfb7e602 100644 --- a/trunk/arch/mips/kernel/smp.c +++ b/trunk/arch/mips/kernel/smp.c @@ -163,10 +163,8 @@ static void stop_this_cpu(void *dummy) * Remove this CPU: */ cpu_clear(smp_processor_id(), cpu_online_map); - for (;;) { - if (cpu_wait) - (*cpu_wait)(); /* Wait if available. */ - } + local_irq_enable(); /* May need to service _machine_restart IPI */ + for (;;); /* Wait if available. */ } void smp_send_stop(void) diff --git a/trunk/arch/mips/kernel/unaligned.c b/trunk/arch/mips/kernel/unaligned.c index 20709669e592..c327b21bca81 100644 --- a/trunk/arch/mips/kernel/unaligned.c +++ b/trunk/arch/mips/kernel/unaligned.c @@ -560,12 +560,12 @@ static int __init debugfs_unaligned(void) return -ENODEV; d = debugfs_create_u32("unaligned_instructions", S_IRUGO, mips_debugfs_dir, &unaligned_instructions); - if (!d) - return -ENOMEM; + if (IS_ERR(d)) + return PTR_ERR(d); d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, mips_debugfs_dir, &unaligned_action); - if (!d) - return -ENOMEM; + if (IS_ERR(d)) + return PTR_ERR(d); return 0; } __initcall(debugfs_unaligned); diff --git a/trunk/arch/mips/lemote/lm2e/pci.c b/trunk/arch/mips/lemote/lm2e/pci.c index 8be03a8e1ad4..c1e41f15cc7e 100644 --- a/trunk/arch/mips/lemote/lm2e/pci.c +++ b/trunk/arch/mips/lemote/lm2e/pci.c @@ -30,20 +30,19 @@ #include #include #include -#include extern struct pci_ops bonito64_pci_ops; static struct resource loongson2e_pci_mem_resource = { .name = "LOONGSON2E PCI MEM", - .start = LOONGSON2E_PCI_MEM_START, - .end = LOONGSON2E_PCI_MEM_END, + .start = 0x14000000UL, + .end = 0x1fffffffUL, .flags = IORESOURCE_MEM, }; static struct resource loongson2e_pci_io_resource = { .name = "LOONGSON2E PCI IO MEM", - .start = LOONGSON2E_PCI_IO_START, + .start = 0x00004000UL, .end = IO_SPACE_LIMIT, .flags = IORESOURCE_IO, }; @@ -83,12 +82,6 @@ static void __init ict_pcimap(void) static int __init pcibios_init(void) { ict_pcimap(); - - loongson2e_pci_controller.io_map_base = - (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE, - loongson2e_pci_io_resource.end - - loongson2e_pci_io_resource.start + 1); - register_pci_controller(&loongson2e_pci_controller); return 0; diff --git a/trunk/arch/mips/lemote/lm2e/setup.c b/trunk/arch/mips/lemote/lm2e/setup.c index ebd6ceaef2fd..2cc6745991ab 100644 --- a/trunk/arch/mips/lemote/lm2e/setup.c +++ b/trunk/arch/mips/lemote/lm2e/setup.c @@ -34,7 +34,6 @@ #include #include #include -#include #ifdef CONFIG_VT #include @@ -43,6 +42,12 @@ extern void mips_reboot_setup(void); +#ifdef CONFIG_64BIT +#define PTR_PAD(p) ((0xffffffff00000000)|((unsigned long long)(p))) +#else +#define PTR_PAD(p) (p) +#endif + unsigned long cpu_clock_freq; unsigned long bus_clock; unsigned int memsize; @@ -75,8 +80,8 @@ static void wbflush_loongson2e(void) void __init plat_mem_setup(void) { - set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE, - IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1)); + set_io_port_base(PTR_PAD(0xbfd00000)); + mips_reboot_setup(); __wbflush = wbflush_loongson2e; diff --git a/trunk/arch/mips/lib/Makefile b/trunk/arch/mips/lib/Makefile index dbcf6511b74e..8810dfb915dd 100644 --- a/trunk/arch/mips/lib/Makefile +++ b/trunk/arch/mips/lib/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_CPU_R4300) += dump_tlb.o obj-$(CONFIG_CPU_R4X00) += dump_tlb.o obj-$(CONFIG_CPU_R5000) += dump_tlb.o obj-$(CONFIG_CPU_R5432) += dump_tlb.o -obj-$(CONFIG_CPU_R5500) += dump_tlb.o obj-$(CONFIG_CPU_R6000) += obj-$(CONFIG_CPU_R8000) += obj-$(CONFIG_CPU_RM7000) += dump_tlb.o diff --git a/trunk/arch/mips/lib/dump_tlb.c b/trunk/arch/mips/lib/dump_tlb.c index 779821cd54ab..465ff0ec85b9 100644 --- a/trunk/arch/mips/lib/dump_tlb.c +++ b/trunk/arch/mips/lib/dump_tlb.c @@ -25,7 +25,6 @@ static inline const char *msk2str(unsigned int mask) case PM_16M: return "16Mb"; case PM_64M: return "64Mb"; case PM_256M: return "256Mb"; - case PM_1G: return "1Gb"; #endif } return ""; diff --git a/trunk/arch/mips/math-emu/cp1emu.c b/trunk/arch/mips/math-emu/cp1emu.c index 7ec0b217dfd3..b08fc65c13a6 100644 --- a/trunk/arch/mips/math-emu/cp1emu.c +++ b/trunk/arch/mips/math-emu/cp1emu.c @@ -1299,12 +1299,12 @@ static int __init debugfs_fpuemu(void) if (!mips_debugfs_dir) return -ENODEV; dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); - if (!dir) - return -ENOMEM; + if (IS_ERR(dir)) + return PTR_ERR(dir); for (i = 0; i < ARRAY_SIZE(vars); i++) { d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v); - if (!d) - return -ENOMEM; + if (IS_ERR(d)) + return PTR_ERR(d); } return 0; } diff --git a/trunk/arch/mips/mm/Makefile b/trunk/arch/mips/mm/Makefile index 95ba32b5b720..44e8dd8106bf 100644 --- a/trunk/arch/mips/mm/Makefile +++ b/trunk/arch/mips/mm/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R5000) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R5432) += c-r4k.o cex-gen.o tlb-r4k.o -obj-$(CONFIG_CPU_R5500) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o tlb-r8k.o obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o tlb-r4k.o diff --git a/trunk/arch/mips/mm/dma-default.c b/trunk/arch/mips/mm/dma-default.c index 5b98d0e731c2..891312f8e5a6 100644 --- a/trunk/arch/mips/mm/dma-default.c +++ b/trunk/arch/mips/mm/dma-default.c @@ -324,6 +324,7 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, if (cpu_is_noncoherent_r10000(dev)) __dma_sync((unsigned long)page_address(sg_page(sg)), sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); } } @@ -341,6 +342,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele if (!plat_device_is_coherent(dev)) __dma_sync((unsigned long)page_address(sg_page(sg)), sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); } } diff --git a/trunk/arch/mips/nxp/pnx833x/common/Makefile b/trunk/arch/mips/nxp/pnx833x/common/Makefile deleted file mode 100644 index 4a16f3b503b5..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/common/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-y := interrupts.o platform.o prom.o setup.o reset.o - -EXTRA_CFLAGS += -Werror diff --git a/trunk/arch/mips/nxp/pnx833x/common/interrupts.c b/trunk/arch/mips/nxp/pnx833x/common/interrupts.c deleted file mode 100644 index 30533ba200e2..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/common/interrupts.c +++ /dev/null @@ -1,380 +0,0 @@ -/* - * interrupts.c: Interrupt mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int mips_cpu_timer_irq; - -static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] = -{ - 0, /* unused */ - 4, /* PNX833X_PIC_I2C0_INT 1 */ - 4, /* PNX833X_PIC_I2C1_INT 2 */ - 1, /* PNX833X_PIC_UART0_INT 3 */ - 1, /* PNX833X_PIC_UART1_INT 4 */ - 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */ - 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */ - 7, /* PNX833X_PIC_GPIO_INT 7 */ - 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */ - 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */ - 4, /* PNX833X_PIC_CONFIG_INT 10 */ - 4, /* PNX833X_PIC_AOI_INT 11 */ - 9, /* PNX833X_PIC_SYNC_INT 12 */ - 9, /* PNX8335_PIC_SATA_INT 13 */ - 4, /* PNX833X_PIC_OSD_INT 14 */ - 9, /* PNX833X_PIC_DISP1_INT 15 */ - 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */ - 9, /* PNX833X_PIC_DISPLAY2_INT 17 */ - 4, /* PNX833X_PIC_VC_INT 18 */ - 4, /* PNX833X_PIC_SC_INT 19 */ - 9, /* PNX833X_PIC_IDE_INT 20 */ - 9, /* PNX833X_PIC_IDE_DMA_INT 21 */ - 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */ - 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */ - 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */ - 4, /* PNX833X_PIC_TS_OUT_INT 25 */ - 4, /* PNX833X_PIC_IR_INT 26 */ - 3, /* PNX833X_PIC_VMSP1_INT 27 */ - 3, /* PNX833X_PIC_VMSP2_INT 28 */ - 4, /* PNX833X_PIC_PIBC_INT 29 */ - 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */ - 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */ - 5, /* PNX833X_PIC_USB_INT 32 */ - 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */ - 4, /* PNX833X_PIC_CLOCK_INT 34 */ - 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */ - 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */ -#if defined(CONFIG_SOC_PNX8335) - 4, /* PNX8335_PIC_MIU_INT 37 */ - 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */ - 9, /* PNX8335_PIC_SYNC_HD_INT 39 */ - 9, /* PNX8335_PIC_DISP_HD_INT 40 */ - 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */ - 4, /* PNX8335_PIC_OSD_HD1_INT 42 */ - 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */ - 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */ - 4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT 45 */ - 4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT 46 */ - 4, /* PNX8335_PIC_DENC_TTX_INT 47 */ - 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */ - 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */ - 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */ - 4, /* PNX8335_PIC_PIBCS_INT 51 */ - 12, /* PNX8335_PIC_ETHERNET_INT 52 */ - 3, /* PNX8335_PIC_VMSP1_0_INT 53 */ - 3, /* PNX8335_PIC_VMSP1_1_INT 54 */ - 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */ - 4, /* PNX8335_PIC_TDGR_DE_INT 56 */ - 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */ -#endif -}; - -static void pnx833x_timer_dispatch(void) -{ - do_IRQ(mips_cpu_timer_irq); -} - -static void pic_dispatch(void) -{ - unsigned int irq = PNX833X_REGFIELD(PIC_INT_SRC, INT_SRC); - - if ((irq >= 1) && (irq < (PNX833X_PIC_NUM_IRQ))) { - unsigned long priority = PNX833X_PIC_INT_PRIORITY; - PNX833X_PIC_INT_PRIORITY = irq_prio[irq]; - - if (irq == PNX833X_PIC_GPIO_INT) { - unsigned long mask = PNX833X_PIO_INT_STATUS & PNX833X_PIO_INT_ENABLE; - int pin; - while ((pin = ffs(mask & 0xffff))) { - pin -= 1; - do_IRQ(PNX833X_GPIO_IRQ_BASE + pin); - mask &= ~(1 << pin); - } - } else { - do_IRQ(irq + PNX833X_PIC_IRQ_BASE); - } - - PNX833X_PIC_INT_PRIORITY = priority; - } else { - printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq); - } -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & STATUSF_IP4) - pic_dispatch(); - else if (pending & STATUSF_IP7) - do_IRQ(PNX833X_TIMER_IRQ); - else - spurious_interrupt(); -} - -static inline void pnx833x_hard_enable_pic_irq(unsigned int irq) -{ - /* Currently we do this by setting IRQ priority to 1. - If priority support is being implemented, 1 should be repalced - by a better value. */ - PNX833X_PIC_INT_REG(irq) = irq_prio[irq]; -} - -static inline void pnx833x_hard_disable_pic_irq(unsigned int irq) -{ - /* Disable IRQ by writing setting it's priority to 0 */ - PNX833X_PIC_INT_REG(irq) = 0; -} - -static int irqflags[PNX833X_PIC_NUM_IRQ]; /* initialized by zeroes */ -#define IRQFLAG_STARTED 1 -#define IRQFLAG_DISABLED 2 - -static DEFINE_SPINLOCK(pnx833x_irq_lock); - -static unsigned int pnx833x_startup_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] = IRQFLAG_STARTED; /* started, not disabled */ - pnx833x_hard_enable_pic_irq(pic_irq); - - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); - return 0; -} - -static void pnx833x_shutdown_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] = 0; /* not started */ - pnx833x_hard_disable_pic_irq(pic_irq); - - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); -} - -static void pnx833x_enable_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] &= ~IRQFLAG_DISABLED; - if (irqflags[pic_irq] == IRQFLAG_STARTED) - pnx833x_hard_enable_pic_irq(pic_irq); - - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); -} - -static void pnx833x_disable_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] |= IRQFLAG_DISABLED; - pnx833x_hard_disable_pic_irq(pic_irq); - - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); -} - -static void pnx833x_ack_pic_irq(unsigned int irq) -{ -} - -static void pnx833x_end_pic_irq(unsigned int irq) -{ -} - -static DEFINE_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock); - -static unsigned int pnx833x_startup_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_enable_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); - return 0; -} - -static void pnx833x_enable_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_enable_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); -} - -static void pnx833x_disable_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_disable_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); -} - -static void pnx833x_ack_gpio_irq(unsigned int irq) -{ -} - -static void pnx833x_end_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_clear_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); -} - -static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - int gpio_mode; - - switch (flow_type) { - case IRQ_TYPE_EDGE_RISING: - gpio_mode = GPIO_INT_EDGE_RISING; - break; - case IRQ_TYPE_EDGE_FALLING: - gpio_mode = GPIO_INT_EDGE_FALLING; - break; - case IRQ_TYPE_EDGE_BOTH: - gpio_mode = GPIO_INT_EDGE_BOTH; - break; - case IRQ_TYPE_LEVEL_HIGH: - gpio_mode = GPIO_INT_LEVEL_HIGH; - break; - case IRQ_TYPE_LEVEL_LOW: - gpio_mode = GPIO_INT_LEVEL_LOW; - break; - default: - gpio_mode = GPIO_INT_NONE; - break; - } - - pnx833x_gpio_setup_irq(gpio_mode, pin); - - return 0; -} - -static struct irq_chip pnx833x_pic_irq_type = { - .typename = "PNX-PIC", - .startup = pnx833x_startup_pic_irq, - .shutdown = pnx833x_shutdown_pic_irq, - .enable = pnx833x_enable_pic_irq, - .disable = pnx833x_disable_pic_irq, - .ack = pnx833x_ack_pic_irq, - .end = pnx833x_end_pic_irq -}; - -static struct irq_chip pnx833x_gpio_irq_type = { - .typename = "PNX-GPIO", - .startup = pnx833x_startup_gpio_irq, - .shutdown = pnx833x_disable_gpio_irq, - .enable = pnx833x_enable_gpio_irq, - .disable = pnx833x_disable_gpio_irq, - .ack = pnx833x_ack_gpio_irq, - .end = pnx833x_end_gpio_irq, - .set_type = pnx833x_set_type_gpio_irq -}; - -void __init arch_init_irq(void) -{ - unsigned int irq; - - /* setup standard internal cpu irqs */ - mips_cpu_irq_init(); - - /* Set IRQ information in irq_desc */ - for (irq = PNX833X_PIC_IRQ_BASE; irq < (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ); irq++) { - pnx833x_hard_disable_pic_irq(irq); - set_irq_chip_and_handler(irq, &pnx833x_pic_irq_type, handle_simple_irq); - } - - for (irq = PNX833X_GPIO_IRQ_BASE; irq < (PNX833X_GPIO_IRQ_BASE + PNX833X_GPIO_NUM_IRQ); irq++) - set_irq_chip_and_handler(irq, &pnx833x_gpio_irq_type, handle_simple_irq); - - /* Set PIC priority limiter register to 0 */ - PNX833X_PIC_INT_PRIORITY = 0; - - /* Setup GPIO IRQ dispatching */ - pnx833x_startup_pic_irq(PNX833X_PIC_GPIO_INT); - - /* Enable PIC IRQs (HWIRQ2) */ - if (cpu_has_vint) - set_vi_handler(4, pic_dispatch); - - write_c0_status(read_c0_status() | IE_IRQ2); -} - -unsigned int __cpuinit get_c0_compare_int(void) -{ - if (cpu_has_vint) - set_vi_handler(cp0_compare_irq, pnx833x_timer_dispatch); - - mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; - return mips_cpu_timer_irq; -} - -void __init plat_time_init(void) -{ - /* calculate mips_hpt_frequency based on PNX833X_CLOCK_CPUCP_CTL reg */ - - extern unsigned long mips_hpt_frequency; - unsigned long reg = PNX833X_CLOCK_CPUCP_CTL; - - if (!(PNX833X_BIT(reg, CLOCK_CPUCP_CTL, EXIT_RESET))) { - /* Functional clock is disabled so use crystal frequency */ - mips_hpt_frequency = 25; - } else { -#if defined(CONFIG_SOC_PNX8335) - /* Functional clock is enabled, so get clock multiplier */ - mips_hpt_frequency = 90 + (10 * PNX8335_REGFIELD(CLOCK_PLL_CPU_CTL, FREQ)); -#else - static const unsigned long int freq[4] = {240, 160, 120, 80}; - mips_hpt_frequency = freq[PNX833X_FIELD(reg, CLOCK_CPUCP_CTL, DIV_CLOCK)]; -#endif - } - - printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency); - - mips_hpt_frequency *= 500000; -} - diff --git a/trunk/arch/mips/nxp/pnx833x/common/platform.c b/trunk/arch/mips/nxp/pnx833x/common/platform.c deleted file mode 100644 index b1ccbcc18f78..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/common/platform.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * platform.c: platform support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * Based on software written by: - * Nikita Youshchenko , based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_I2C_PNX0105 -/* Until i2c driver available in kernel.*/ -#include -#endif - -#include -#include -#include - -static u64 uart_dmamask = DMA_32BIT_MASK; - -static struct resource pnx833x_uart_resources[] = { - [0] = { - .start = PNX833X_UART0_PORTS_START, - .end = PNX833X_UART0_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX833X_PIC_UART0_INT, - .end = PNX833X_PIC_UART0_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = PNX833X_UART1_PORTS_START, - .end = PNX833X_UART1_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PNX833X_PIC_UART1_INT, - .end = PNX833X_PIC_UART1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct pnx8xxx_port pnx8xxx_ports[] = { - [0] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX833X_UART0_PORTS_START, - .mapbase = PNX833X_UART0_PORTS_START, - .irq = PNX833X_PIC_UART0_INT, - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX833X_UART1_PORTS_START, - .mapbase = PNX833X_UART1_PORTS_START, - .irq = PNX833X_PIC_UART1_INT, - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, -}; - -static struct platform_device pnx833x_uart_device = { - .name = "pnx8xxx-uart", - .id = -1, - .dev = { - .dma_mask = &uart_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - .platform_data = pnx8xxx_ports, - }, - .num_resources = ARRAY_SIZE(pnx833x_uart_resources), - .resource = pnx833x_uart_resources, -}; - -static u64 ehci_dmamask = DMA_32BIT_MASK; - -static struct resource pnx833x_usb_ehci_resources[] = { - [0] = { - .start = PNX833X_USB_PORTS_START, - .end = PNX833X_USB_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX833X_PIC_USB_INT, - .end = PNX833X_PIC_USB_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_usb_ehci_device = { - .name = "pnx833x-ehci", - .id = -1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources), - .resource = pnx833x_usb_ehci_resources, -}; - -#ifdef CONFIG_I2C_PNX0105 -static struct resource pnx833x_i2c0_resources[] = { - { - .start = PNX833X_I2C0_PORTS_START, - .end = PNX833X_I2C0_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C0_INT, - .end = PNX833X_PIC_I2C0_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pnx833x_i2c1_resources[] = { - { - .start = PNX833X_I2C1_PORTS_START, - .end = PNX833X_I2C1_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C1_INT, - .end = PNX833X_PIC_I2C1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { - { - .base = PNX833X_I2C0_PORTS_START, - .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ - .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ - .bus_addr = 0, /* no slave support */ - }, - { - .base = PNX833X_I2C1_PORTS_START, - .irq = -1, /* on high freq, polling is faster */ - /*.irq = PNX833X_PIC_I2C1_INT,*/ - .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */ - .bus_addr = 0, /* no slave support */ - }, -}; - -static struct platform_device pnx833x_i2c0_device = { - .name = "i2c-pnx0105", - .id = 0, - .dev = { - .platform_data = &pnx833x_i2c_dev[0], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), - .resource = pnx833x_i2c0_resources, -}; - -static struct platform_device pnx833x_i2c1_device = { - .name = "i2c-pnx0105", - .id = 1, - .dev = { - .platform_data = &pnx833x_i2c_dev[1], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), - .resource = pnx833x_i2c1_resources, -}; -#endif - -static u64 ethernet_dmamask = DMA_32BIT_MASK; - -static struct resource pnx833x_ethernet_resources[] = { - [0] = { - .start = PNX8335_IP3902_PORTS_START, - .end = PNX8335_IP3902_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8335_PIC_ETHERNET_INT, - .end = PNX8335_PIC_ETHERNET_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_ethernet_device = { - .name = "ip3902-eth", - .id = -1, - .dev = { - .dma_mask = ðernet_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), - .resource = pnx833x_ethernet_resources, -}; - -static struct resource pnx833x_sata_resources[] = { - [0] = { - .start = PNX8335_SATA_PORTS_START, - .end = PNX8335_SATA_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8335_PIC_SATA_INT, - .end = PNX8335_PIC_SATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_sata_device = { - .name = "pnx833x-sata", - .id = -1, - .num_resources = ARRAY_SIZE(pnx833x_sata_resources), - .resource = pnx833x_sata_resources, -}; - -static const char *part_probes[] = { - "cmdlinepart", - NULL -}; - -static void -pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK)); - else - writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK)); -} - -static struct platform_nand_data pnx833x_flash_nand_data = { - .chip = { - .chip_delay = 25, - .part_probe_types = part_probes, - }, - .ctrl = { - .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl - } -}; - -/* - * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!), - * 12 bytes more seems to be the standard that allows for NAND access. - */ -static struct resource pnx833x_flash_nand_resource = { - .start = PNX8335_NAND_BASE, - .end = PNX8335_NAND_BASE + 12, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pnx833x_flash_nand = { - .name = "gen_nand", - .id = -1, - .num_resources = 1, - .resource = &pnx833x_flash_nand_resource, - .dev = { - .platform_data = &pnx833x_flash_nand_data, - }, -}; - -static struct platform_device *pnx833x_platform_devices[] __initdata = { - &pnx833x_uart_device, - &pnx833x_usb_ehci_device, -#ifdef CONFIG_I2C_PNX0105 - &pnx833x_i2c0_device, - &pnx833x_i2c1_device, -#endif - &pnx833x_ethernet_device, - &pnx833x_sata_device, - &pnx833x_flash_nand, -}; - -static int __init pnx833x_platform_init(void) -{ - int res; - - res = platform_add_devices(pnx833x_platform_devices, - ARRAY_SIZE(pnx833x_platform_devices)); - - return res; -} - -arch_initcall(pnx833x_platform_init); diff --git a/trunk/arch/mips/nxp/pnx833x/common/prom.c b/trunk/arch/mips/nxp/pnx833x/common/prom.c deleted file mode 100644 index 2a41e8fec210..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/common/prom.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * prom.c: - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * Based on software written by: - * Nikita Youshchenko , based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -void __init prom_init_cmdline(void) -{ - int argc = fw_arg0; - char **argv = (char **)fw_arg1; - char *c = &(arcs_cmdline[0]); - int i; - - for (i = 1; i < argc; i++) { - strcpy(c, argv[i]); - c += strlen(argv[i]); - if (i < argc-1) - *c++ = ' '; - } - *c = 0; -} - -char __init *prom_getenv(char *envname) -{ - extern char **prom_envp; - char **env = prom_envp; - int i; - - i = strlen(envname); - - while (*env) { - if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=') - return *env + i + 1; - env++; - } - - return 0; -} - -void __init prom_free_prom_memory(void) -{ -} - -char * __init prom_getcmdline(void) -{ - return arcs_cmdline; -} - diff --git a/trunk/arch/mips/nxp/pnx833x/common/reset.c b/trunk/arch/mips/nxp/pnx833x/common/reset.c deleted file mode 100644 index a9bc9bacad2b..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/common/reset.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * reset.c: reset support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * Based on software written by: - * Nikita Youshchenko , based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -void pnx833x_machine_restart(char *command) -{ - PNX833X_RESET_CONTROL_2 = 0; - PNX833X_RESET_CONTROL = 0; -} - -void pnx833x_machine_halt(void) -{ - while (1) - __asm__ __volatile__ ("wait"); - -} - -void pnx833x_machine_power_off(void) -{ - pnx833x_machine_halt(); -} diff --git a/trunk/arch/mips/nxp/pnx833x/common/setup.c b/trunk/arch/mips/nxp/pnx833x/common/setup.c deleted file mode 100644 index e51fbc4b644d..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/common/setup.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * setup.c: Setup PNX833X Soc. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * Based on software written by: - * Nikita Youshchenko , based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -extern void pnx833x_board_setup(void); -extern void pnx833x_machine_restart(char *); -extern void pnx833x_machine_halt(void); -extern void pnx833x_machine_power_off(void); - -int __init plat_mem_setup(void) -{ - /* fake pci bus to avoid bounce buffers */ - PCI_DMA_BUS_IS_PHYS = 1; - - /* set mips clock to 320MHz */ -#if defined(CONFIG_SOC_PNX8335) - PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ); -#endif - pnx833x_gpio_init(); /* so it will be ready in board_setup() */ - - pnx833x_board_setup(); - - _machine_restart = pnx833x_machine_restart; - _machine_halt = pnx833x_machine_halt; - pm_power_off = pnx833x_machine_power_off; - - /* IO/MEM resources. */ - set_io_port_base(KSEG1); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - return 0; -} diff --git a/trunk/arch/mips/nxp/pnx833x/stb22x/Makefile b/trunk/arch/mips/nxp/pnx833x/stb22x/Makefile deleted file mode 100644 index f81c5801f455..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/stb22x/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -lib-y := board.o - -EXTRA_CFLAGS += -Werror diff --git a/trunk/arch/mips/nxp/pnx833x/stb22x/board.c b/trunk/arch/mips/nxp/pnx833x/stb22x/board.c deleted file mode 100644 index 90cc604bdadf..000000000000 --- a/trunk/arch/mips/nxp/pnx833x/stb22x/board.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * board.c: STB225 board support. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel - * Daniel Laird - * - * Based on software written by: - * Nikita Youshchenko , based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include - -/* endianess twiddlers */ -#define PNX8335_DEBUG0 0x4400 -#define PNX8335_DEBUG1 0x4404 -#define PNX8335_DEBUG2 0x4408 -#define PNX8335_DEBUG3 0x440c -#define PNX8335_DEBUG4 0x4410 -#define PNX8335_DEBUG5 0x4414 -#define PNX8335_DEBUG6 0x4418 -#define PNX8335_DEBUG7 0x441c - -int prom_argc; -char **prom_argv = 0, **prom_envp = 0; - -extern void prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "NXP STB22x"; -} - -static inline unsigned long env_or_default(char *env, unsigned long dfl) -{ - char *str = prom_getenv(env); - return str ? simple_strtol(str, 0, 0) : dfl; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize = env_or_default("memsize", 0x02000000); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void __init pnx833x_board_setup(void) -{ - pnx833x_gpio_select_function_alt(4); - pnx833x_gpio_select_output(4); - pnx833x_gpio_select_function_alt(5); - pnx833x_gpio_select_input(5); - pnx833x_gpio_select_function_alt(6); - pnx833x_gpio_select_input(6); - pnx833x_gpio_select_function_alt(7); - pnx833x_gpio_select_output(7); - - pnx833x_gpio_select_function_alt(25); - pnx833x_gpio_select_function_alt(26); - - pnx833x_gpio_select_function_alt(27); - pnx833x_gpio_select_function_alt(28); - pnx833x_gpio_select_function_alt(29); - pnx833x_gpio_select_function_alt(30); - pnx833x_gpio_select_function_alt(31); - pnx833x_gpio_select_function_alt(32); - pnx833x_gpio_select_function_alt(33); - -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) - /* Setup MIU for NAND access on CS0... - * - * (it seems that we must also configure CS1 for reliable operation, - * otherwise the first read ID command will fail if it's read as 4 bytes - * but pass if it's read as 1 word.) - */ - - /* Setup MIU CS0 & CS1 timing */ - PNX833X_MIU_SEL0 = 0; - PNX833X_MIU_SEL1 = 0; - PNX833X_MIU_SEL0_TIMING = 0x50003081; - PNX833X_MIU_SEL1_TIMING = 0x50003081; - - /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ - pnx833x_gpio_select_function_alt(0); - - /* Setup GPIO 04 to input NAND read/busy signal */ - pnx833x_gpio_select_function_io(4); - pnx833x_gpio_select_input(4); - - /* Setup GPIO 05 to disable NAND write protect */ - pnx833x_gpio_select_function_io(5); - pnx833x_gpio_select_output(5); - pnx833x_gpio_write(1, 5); - -#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE) - - /* Set up MIU for 16-bit NOR access on CS0 and CS1... */ - - /* Setup MIU CS0 & CS1 timing */ - PNX833X_MIU_SEL0 = 1; - PNX833X_MIU_SEL1 = 1; - PNX833X_MIU_SEL0_TIMING = 0x6A08D082; - PNX833X_MIU_SEL1_TIMING = 0x6A08D082; - - /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ - pnx833x_gpio_select_function_alt(0); -#endif -} diff --git a/trunk/arch/mips/pci/Makefile b/trunk/arch/mips/pci/Makefile index e8a97f59e066..b1886244cedf 100644 --- a/trunk/arch/mips/pci/Makefile +++ b/trunk/arch/mips/pci/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o +obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o diff --git a/trunk/arch/mips/pci/fixup-emma2rh.c b/trunk/arch/mips/pci/fixup-emma2rh.c index fba5aad00d51..846eae9cdd05 100644 --- a/trunk/arch/mips/pci/fixup-emma2rh.c +++ b/trunk/arch/mips/pci/fixup-emma2rh.c @@ -30,7 +30,7 @@ #include -#include +#include #define EMMA2RH_PCI_HOST_SLOT 0x09 #define EMMA2RH_USB_SLOT 0x03 diff --git a/trunk/arch/mips/pci/fixup-rc32434.c b/trunk/arch/mips/pci/fixup-rc32434.c index 3d86823d03a0..75b90dcb7a09 100644 --- a/trunk/arch/mips/pci/fixup-rc32434.c +++ b/trunk/arch/mips/pci/fixup-rc32434.c @@ -30,7 +30,6 @@ #include #include -#include static int __devinitdata irq_map[2][12] = { {0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1}, diff --git a/trunk/arch/mips/pci/ops-emma2rh.c b/trunk/arch/mips/pci/ops-emma2rh.c index 5947a70b0b7f..d31bfc6d4150 100644 --- a/trunk/arch/mips/pci/ops-emma2rh.c +++ b/trunk/arch/mips/pci/ops-emma2rh.c @@ -30,7 +30,7 @@ #include #include -#include +#include #define RTABORT (0x1<<9) #define RMABORT (0x1<<10) diff --git a/trunk/arch/mips/pci/pci-emma2rh.c b/trunk/arch/mips/pci/pci-emma2rh.c index 2df4190232cd..772e283daa63 100644 --- a/trunk/arch/mips/pci/pci-emma2rh.c +++ b/trunk/arch/mips/pci/pci-emma2rh.c @@ -30,7 +30,7 @@ #include -#include +#include static struct resource pci_io_resource = { .name = "pci IO space", diff --git a/trunk/arch/mips/rb532/devices.c b/trunk/arch/mips/rb532/devices.c index 2f22d714d5b0..31619c601b11 100644 --- a/trunk/arch/mips/rb532/devices.c +++ b/trunk/arch/mips/rb532/devices.c @@ -280,7 +280,7 @@ static int __init plat_setup_devices(void) { /* Look for the CF card reader */ if (!readl(IDT434_REG_BASE + DEV1MASK)) - rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */ + rb532_devs[1] = NULL; else { cf_slot0_res[0].start = readl(IDT434_REG_BASE + DEV1BASE); diff --git a/trunk/arch/mips/rb532/gpio.c b/trunk/arch/mips/rb532/gpio.c index 70c4a6726377..76a7fd96d564 100644 --- a/trunk/arch/mips/rb532/gpio.c +++ b/trunk/arch/mips/rb532/gpio.c @@ -310,10 +310,6 @@ int __init rb532_gpio_init(void) return -ENXIO; } - /* Set the interrupt status and level for the CF pin */ - rb532_gpio_set_int_level(&rb532_gpio_chip->chip, CF_GPIO_NUM, 1); - rb532_gpio_set_int_status(&rb532_gpio_chip->chip, CF_GPIO_NUM, 0); - return 0; } arch_initcall(rb532_gpio_init); diff --git a/trunk/arch/mips/sgi-ip22/ip22-int.c b/trunk/arch/mips/sgi-ip22/ip22-int.c index f8b18af141a1..f6d9bf4b26e7 100644 --- a/trunk/arch/mips/sgi-ip22/ip22-int.c +++ b/trunk/arch/mips/sgi-ip22/ip22-int.c @@ -12,11 +12,20 @@ #include #include #include +#include +#include #include +#include +#include +#include #include +#include #include #include +#include + +/* #define DEBUG_SGINT */ /* So far nothing hangs here */ #undef USE_LIO3_IRQ @@ -59,7 +68,7 @@ static void enable_local1_irq(unsigned int irq) sgint->imask1 |= (1 << (irq - SGINT_LOCAL1)); } -static void disable_local1_irq(unsigned int irq) +void disable_local1_irq(unsigned int irq) { sgint->imask1 &= ~(1 << (irq - SGINT_LOCAL1)); } @@ -78,7 +87,7 @@ static void enable_local2_irq(unsigned int irq) sgint->cmeimask0 |= (1 << (irq - SGINT_LOCAL2)); } -static void disable_local2_irq(unsigned int irq) +void disable_local2_irq(unsigned int irq) { sgint->cmeimask0 &= ~(1 << (irq - SGINT_LOCAL2)); if (!sgint->cmeimask0) @@ -99,7 +108,7 @@ static void enable_local3_irq(unsigned int irq) sgint->cmeimask1 |= (1 << (irq - SGINT_LOCAL3)); } -static void disable_local3_irq(unsigned int irq) +void disable_local3_irq(unsigned int irq) { sgint->cmeimask1 &= ~(1 << (irq - SGINT_LOCAL3)); if (!sgint->cmeimask1) @@ -335,6 +344,6 @@ void __init arch_init_irq(void) #ifdef CONFIG_EISA if (ip22_is_fullhouse()) /* Only Indigo-2 has EISA stuff */ - ip22_eisa_init(); + ip22_eisa_init(); #endif } diff --git a/trunk/arch/mips/txx9/Kconfig b/trunk/arch/mips/txx9/Kconfig index 226e8bb2f0a1..17052db4161d 100644 --- a/trunk/arch/mips/txx9/Kconfig +++ b/trunk/arch/mips/txx9/Kconfig @@ -46,10 +46,9 @@ config TOSHIBA_RBTX4938 support this machine type config TOSHIBA_RBTX4939 - bool "Toshiba RBTX4939 board" + bool "Toshiba RBTX4939 bobard" depends on MACH_TX49XX select SOC_TX4939 - select TXX9_7SEGLED help This Toshiba board is based on the TX4939 processor. Say Y here to support this machine type @@ -87,9 +86,6 @@ config SOC_TX4939 select HW_HAS_PCI select PCI_TX4927 -config TXX9_7SEGLED - bool - config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on PCI && MACH_TXX9 diff --git a/trunk/arch/mips/txx9/generic/7segled.c b/trunk/arch/mips/txx9/generic/7segled.c deleted file mode 100644 index 727ab21b6618..000000000000 --- a/trunk/arch/mips/txx9/generic/7segled.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * 7 Segment LED routines - * Based on RBTX49xx patch from CELF patch archive. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * (C) Copyright TOSHIBA CORPORATION 2005-2007 - * All Rights Reserved. - */ -#include -#include -#include -#include - -static unsigned int tx_7segled_num; -static void (*tx_7segled_putc)(unsigned int pos, unsigned char val); - -void __init txx9_7segled_init(unsigned int num, - void (*putc)(unsigned int pos, unsigned char val)) -{ - tx_7segled_num = num; - tx_7segled_putc = putc; -} - -static SEG7_CONVERSION_MAP(txx9_seg7map, MAP_ASCII7SEG_ALPHANUM_LC); - -int txx9_7segled_putc(unsigned int pos, char c) -{ - if (pos >= tx_7segled_num) - return -EINVAL; - c = map_to_seg7(&txx9_seg7map, c); - if (c < 0) - return c; - tx_7segled_putc(pos, c); - return 0; -} - -static ssize_t ascii_store(struct sys_device *dev, - struct sysdev_attribute *attr, - const char *buf, size_t size) -{ - unsigned int ch = dev->id; - txx9_7segled_putc(ch, buf[0]); - return size; -} - -static ssize_t raw_store(struct sys_device *dev, - struct sysdev_attribute *attr, - const char *buf, size_t size) -{ - unsigned int ch = dev->id; - tx_7segled_putc(ch, buf[0]); - return size; -} - -static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store); -static SYSDEV_ATTR(raw, 0200, NULL, raw_store); - -static ssize_t map_seg7_show(struct sysdev_class *class, char *buf) -{ - memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map)); - return sizeof(txx9_seg7map); -} - -static ssize_t map_seg7_store(struct sysdev_class *class, - const char *buf, size_t size) -{ - if (size != sizeof(txx9_seg7map)) - return -EINVAL; - memcpy(&txx9_seg7map, buf, size); - return size; -} - -static SYSDEV_CLASS_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store); - -static struct sysdev_class tx_7segled_sysdev_class = { - .name = "7segled", -}; - -static int __init tx_7segled_init_sysfs(void) -{ - int error, i; - if (!tx_7segled_num) - return -ENODEV; - error = sysdev_class_register(&tx_7segled_sysdev_class); - if (error) - return error; - error = sysdev_class_create_file(&tx_7segled_sysdev_class, - &attr_map_seg7); - if (error) - return error; - for (i = 0; i < tx_7segled_num; i++) { - struct sys_device *dev; - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - error = -ENODEV; - break; - } - dev->id = i; - dev->cls = &tx_7segled_sysdev_class; - error = sysdev_register(dev); - if (!error) { - sysdev_create_file(dev, &attr_ascii); - sysdev_create_file(dev, &attr_raw); - } - } - return error; -} - -device_initcall(tx_7segled_init_sysfs); diff --git a/trunk/arch/mips/txx9/generic/Makefile b/trunk/arch/mips/txx9/generic/Makefile index f2579ce054a1..0030d23bef5b 100644 --- a/trunk/arch/mips/txx9/generic/Makefile +++ b/trunk/arch/mips/txx9/generic/Makefile @@ -10,6 +10,5 @@ obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_SOC_TX4939) += setup_tx4939.o irq_tx4939.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_SPI) += spi_eeprom.o -obj-$(CONFIG_TXX9_7SEGLED) += 7segled.o EXTRA_CFLAGS += -Werror diff --git a/trunk/arch/mips/txx9/generic/setup.c b/trunk/arch/mips/txx9/generic/setup.c index a13a08b8c9ec..5526375010f8 100644 --- a/trunk/arch/mips/txx9/generic/setup.c +++ b/trunk/arch/mips/txx9/generic/setup.c @@ -156,23 +156,11 @@ static struct txx9_board_vec *__init find_board_byname(const char *name) static void __init prom_init_cmdline(void) { - int argc; - int *argv32; + int argc = (int)fw_arg0; + int *argv32 = (int *)fw_arg1; int i; /* Always ignore the "-c" at argv[0] */ char builtin[CL_SIZE]; - if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { - /* - * argc is not a valid number, or argv32 is not a valid - * pointer - */ - argc = 0; - argv32 = NULL; - } else { - argc = (int)fw_arg0; - argv32 = (int *)fw_arg1; - } - /* ignore all built-in args if any f/w args given */ /* * But if built-in strings was started with '+', append them @@ -426,12 +414,10 @@ char * __init prom_getcmdline(void) const char *__init prom_getenv(const char *name) { - const s32 *str; + const s32 *str = (const s32 *)fw_arg2; - if (fw_arg2 < CKSEG0) + if (!str) return NULL; - - str = (const s32 *)fw_arg2; /* YAMON style ("name", "value" pairs) */ while (str[0] && str[1]) { if (!strcmp((const char *)(unsigned long)str[0], name)) @@ -636,21 +622,6 @@ unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none; EXPORT_SYMBOL(__swizzle_addr_b); #endif -#ifdef NEEDS_TXX9_IOSWABW -static u16 ioswabw_default(volatile u16 *a, u16 x) -{ - return le16_to_cpu(x); -} -static u16 __mem_ioswabw_default(volatile u16 *a, u16 x) -{ - return x; -} -u16 (*ioswabw)(volatile u16 *a, u16 x) = ioswabw_default; -EXPORT_SYMBOL(ioswabw); -u16 (*__mem_ioswabw)(volatile u16 *a, u16 x) = __mem_ioswabw_default; -EXPORT_SYMBOL(__mem_ioswabw); -#endif - void __init txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, const struct physmap_flash_data *pdata) diff --git a/trunk/arch/mips/txx9/rbtx4939/setup.c b/trunk/arch/mips/txx9/rbtx4939/setup.c index 6daee9b1cd5e..9855d7bccc20 100644 --- a/trunk/arch/mips/txx9/rbtx4939/setup.c +++ b/trunk/arch/mips/txx9/rbtx4939/setup.c @@ -14,8 +14,6 @@ #include #include #include -#include -#include #include #include #include @@ -35,21 +33,6 @@ static void __init rbtx4939_time_init(void) tx4939_time_init(0); } -#if defined(__BIG_ENDIAN) && \ - (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) -#define HAVE_RBTX4939_IOSWAB -#define IS_CE1_ADDR(addr) \ - ((((unsigned long)(addr) - IO_BASE) & 0xfff00000) == TXX9_CE(1)) -static u16 rbtx4939_ioswabw(volatile u16 *a, u16 x) -{ - return IS_CE1_ADDR(a) ? x : le16_to_cpu(x); -} -static u16 rbtx4939_mem_ioswabw(volatile u16 *a, u16 x) -{ - return !IS_CE1_ADDR(a) ? x : le16_to_cpu(x); -} -#endif /* __BIG_ENDIAN && CONFIG_SMC91X */ - static void __init rbtx4939_pci_setup(void) { #ifdef CONFIG_PCI @@ -256,32 +239,6 @@ static inline void rbtx4939_led_setup(void) } #endif -static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val) -{ -#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) - unsigned long flags; - local_irq_save(flags); - /* bit7: reserved for LED class */ - led_val[pos] = (led_val[pos] & 0x80) | (val & 0x7f); - val = led_val[pos]; - local_irq_restore(flags); -#endif - writeb(val, rbtx4939_7seg_addr(pos / 4, pos % 4)); -} - -static void rbtx4939_7segled_putc(unsigned int pos, unsigned char val) -{ - /* convert from map_to_seg7() notation */ - val = (val & 0x88) | - ((val & 0x40) >> 6) | - ((val & 0x20) >> 4) | - ((val & 0x10) >> 2) | - ((val & 0x04) << 2) | - ((val & 0x02) << 4) | - ((val & 0x01) << 6); - __rbtx4939_7segled_putc(pos, val); -} - static void __init rbtx4939_arch_init(void) { rbtx4939_pci_setup(); @@ -289,22 +246,6 @@ static void __init rbtx4939_arch_init(void) static void __init rbtx4939_device_init(void) { - unsigned long smc_addr = RBTX4939_ETHER_ADDR - IO_BASE; - struct resource smc_res[] = { - { - .start = smc_addr, - .end = smc_addr + 0x10 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RBTX4939_IRQ_ETHER, - /* override default irq flag defined in smc91x.h */ - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, - }; - struct smc91x_platdata smc_pdata = { - .flags = SMC91X_USE_16BIT, - }; - struct platform_device *pdev; #if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) int i, j; unsigned char ethaddr[2][6]; @@ -321,12 +262,6 @@ static void __init rbtx4939_device_init(void) } tx4939_ethaddr_init(ethaddr[0], ethaddr[1]); #endif - pdev = platform_device_alloc("smc91x", -1); - if (!pdev || - platform_device_add_resources(pdev, smc_res, ARRAY_SIZE(smc_res)) || - platform_device_add_data(pdev, &smc_pdata, sizeof(smc_pdata)) || - platform_device_add(pdev)) - platform_device_put(pdev); rbtx4939_led_setup(); tx4939_wdt_init(); tx4939_ata_init(); @@ -334,8 +269,6 @@ static void __init rbtx4939_device_init(void) static void __init rbtx4939_setup(void) { - int i; - rbtx4939_ebusc_setup(); /* always enable ATA0 */ txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE); @@ -343,16 +276,9 @@ static void __init rbtx4939_setup(void) if (txx9_master_clock == 0) txx9_master_clock = 20000000; tx4939_setup(); -#ifdef HAVE_RBTX4939_IOSWAB - ioswabw = rbtx4939_ioswabw; - __mem_ioswabw = rbtx4939_mem_ioswabw; -#endif _machine_restart = rbtx4939_machine_restart; - txx9_7segled_init(RBTX4939_MAX_7SEGLEDS, rbtx4939_7segled_putc); - for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) - txx9_7segled_putc(i, '-'); pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr), readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr)); diff --git a/trunk/drivers/input/misc/sgi_btns.c b/trunk/drivers/input/misc/sgi_btns.c index be3a15f5b25d..ce238f59b3c8 100644 --- a/trunk/drivers/input/misc/sgi_btns.c +++ b/trunk/drivers/input/misc/sgi_btns.c @@ -174,6 +174,5 @@ static void __exit sgi_buttons_exit(void) platform_driver_unregister(&sgi_buttons_driver); } -MODULE_LICENSE("GPL"); module_init(sgi_buttons_init); module_exit(sgi_buttons_exit); diff --git a/trunk/include/scsi/scsi_tcq.h b/trunk/include/scsi/scsi_tcq.h index cf4c219c0b5c..17231385cb37 100644 --- a/trunk/include/scsi/scsi_tcq.h +++ b/trunk/include/scsi/scsi_tcq.h @@ -140,8 +140,18 @@ static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag) */ static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth) { - shost->bqt = blk_init_tags(depth); - return shost->bqt ? 0 : -ENOMEM; + /* + * If the shared tag map isn't already initialized, do it now. + * This saves callers from having to check ->bqt when setting up + * devices on the shared host (for libata) + */ + if (!shost->bqt) { + shost->bqt = blk_init_tags(depth); + if (!shost->bqt) + return -ENOMEM; + } + + return 0; } /**