diff --git a/[refs] b/[refs] index ccf276b5d9a7..749d5db3fbcd 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: cab8e5c4444cb7d9b8035de5d81fbfd5284a02fa +refs/heads/master: 756813cac1d0172e1f93d977fe8bd1cd5086be21 diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 23a04f431283..4ce895a4b5ba 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -3618,7 +3618,7 @@ W: http://www.kroah.com/linux-usb/ USB DAVICOM DM9601 DRIVER P: Peter Korsgaard M: jacmet@sunsite.dk -L: netdev@vger.kernel.org +L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org/usbnet S: Maintained @@ -3702,8 +3702,8 @@ S: Maintained USB PEGASUS DRIVER P: Petko Manolov M: petkan@users.sourceforge.net +L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net -L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ S: Maintained @@ -3717,8 +3717,8 @@ S: Maintained USB RTL8150 DRIVER P: Petko Manolov M: petkan@users.sourceforge.net +L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net -L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ S: Maintained @@ -3829,7 +3829,7 @@ S: Maintained USB "USBNET" DRIVER FRAMEWORK P: David Brownell M: dbrownell@users.sourceforge.net -L: netdev@vger.kernel.org +L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org/usbnet S: Maintained diff --git a/trunk/arch/arm/mach-versatile/pci.c b/trunk/arch/arm/mach-versatile/pci.c index ba58223f12be..ca8290159432 100644 --- a/trunk/arch/arm/mach-versatile/pci.c +++ b/trunk/arch/arm/mach-versatile/pci.c @@ -117,7 +117,10 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh } else { switch (size) { case 1: - v = __raw_readb(addr); + v = __raw_readl(addr); + if (where & 2) v >>= 16; + if (where & 1) v >>= 8; + v &= 0xff; break; case 2: diff --git a/trunk/arch/blackfin/Kconfig b/trunk/arch/blackfin/Kconfig index d98bafcaca59..1fad8560c7af 100644 --- a/trunk/arch/blackfin/Kconfig +++ b/trunk/arch/blackfin/Kconfig @@ -142,12 +142,6 @@ config BF_REV_0_5 bool "0.5" depends on (BF561 || BF533 || BF532 || BF531) -config BF_REV_ANY - bool "any" - -config BF_REV_NONE - bool "none" - endchoice config BFIN_DUAL_CORE diff --git a/trunk/arch/blackfin/Makefile b/trunk/arch/blackfin/Makefile index 6971a4418dfe..75e89c324756 100644 --- a/trunk/arch/blackfin/Makefile +++ b/trunk/arch/blackfin/Makefile @@ -28,27 +28,6 @@ machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE -cpu-$(CONFIG_BF531) := bf531 -cpu-$(CONFIG_BF532) := bf532 -cpu-$(CONFIG_BF533) := bf533 -cpu-$(CONFIG_BF534) := bf534 -cpu-$(CONFIG_BF536) := bf536 -cpu-$(CONFIG_BF537) := bf537 -cpu-$(CONFIG_BF548) := bf548 -cpu-$(CONFIG_BF549) := bf549 -cpu-$(CONFIG_BF561) := bf561 - -rev-$(CONFIG_BF_REV_0_0) := 0.0 -rev-$(CONFIG_BF_REV_0_1) := 0.1 -rev-$(CONFIG_BF_REV_0_2) := 0.2 -rev-$(CONFIG_BF_REV_0_3) := 0.3 -rev-$(CONFIG_BF_REV_0_4) := 0.4 -rev-$(CONFIG_BF_REV_0_5) := 0.5 -rev-$(CONFIG_BF_REV_NONE) := none -rev-$(CONFIG_BF_REV_ANY) := any - -CFLAGS += -mcpu=$(cpu-y)-$(rev-y) -AFLAGS += -mcpu=$(cpu-y)-$(rev-y) head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o diff --git a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig index 1cf1ab28dc66..90d58aabe693 100644 --- a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,26 +115,17 @@ CONFIG_BF533=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set -# CONFIG_BF542 is not set -# CONFIG_BF544 is not set -# CONFIG_BF548 is not set -# CONFIG_BF549 is not set # CONFIG_BF561 is not set -# CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_ANY is not set -# CONFIG_BF_REV_NONE is not set -CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y CONFIG_BFIN533_EZKIT=y # CONFIG_BFIN533_STAMP is not set # CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set # CONFIG_BFIN561_TEPLA is not set @@ -643,7 +634,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # # Ethernet (1000 Mbit) diff --git a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig index 64b7f1b3b2af..fee918957392 100644 --- a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,26 +115,17 @@ CONFIG_BF533=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set -# CONFIG_BF542 is not set -# CONFIG_BF544 is not set -# CONFIG_BF548 is not set -# CONFIG_BF549 is not set # CONFIG_BF561 is not set -# CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_ANY is not set -# CONFIG_BF_REV_NONE is not set -CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y # CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set # CONFIG_BFIN561_TEPLA is not set @@ -655,7 +646,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # # Ethernet (1000 Mbit) @@ -996,17 +986,9 @@ CONFIG_SND_VERBOSE_PROCFS=y # # ALSA Blackfin devices # -CONFIG_SND_BLACKFIN_AD1836=m -CONFIG_SND_BLACKFIN_AD1836_TDM=y -# CONFIG_SND_BLACKFIN_AD1836_I2S is not set -CONFIG_SND_BLACKFIN_AD1836_MULSUB=y -# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_AD1981B=m -CONFIG_SND_BLACKFIN_SPORT=0 -CONFIG_SND_BLACKFIN_SPI_PFBIT=4 -CONFIG_SND_BFIN_AD73311=m -CONFIG_SND_BFIN_SPORT=0 -CONFIG_SND_BFIN_AD73311_SE=4 +# CONFIG_SND_BLACKFIN_AD1836 is not set +# CONFIG_SND_BLACKFIN_AD1981B is not set +# CONFIG_SND_BFIN_AD73311 is not set # # SoC audio support diff --git a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig index ccf09dc09a18..37688bb55b9a 100644 --- a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,26 +115,17 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y -# CONFIG_BF542 is not set -# CONFIG_BF544 is not set -# CONFIG_BF548 is not set -# CONFIG_BF549 is not set # CONFIG_BF561 is not set -# CONFIG_BF_REV_0_0 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_ANY is not set -# CONFIG_BF_REV_NONE is not set -CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y # CONFIG_BFIN533_EZKIT is not set # CONFIG_BFIN533_STAMP is not set CONFIG_BFIN537_STAMP=y # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set # CONFIG_BFIN561_TEPLA is not set @@ -673,7 +664,6 @@ CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set -# CONFIG_SMSC911X is not set # # Ethernet (1000 Mbit) @@ -1030,17 +1020,9 @@ CONFIG_SND_VERBOSE_PROCFS=y # # ALSA Blackfin devices # -CONFIG_SND_BLACKFIN_AD1836=m -CONFIG_SND_BLACKFIN_AD1836_TDM=y -# CONFIG_SND_BLACKFIN_AD1836_I2S is not set -CONFIG_SND_BLACKFIN_AD1836_MULSUB=y -# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_AD1981B=m -CONFIG_SND_BLACKFIN_SPORT=0 -CONFIG_SND_BLACKFIN_SPI_PFBIT=4 -CONFIG_SND_BFIN_AD73311=m -CONFIG_SND_BFIN_SPORT=0 -CONFIG_SND_BFIN_AD73311_SE=4 +# CONFIG_SND_BLACKFIN_AD1836 is not set +# CONFIG_SND_BLACKFIN_AD1981B is not set +# CONFIG_SND_BFIN_AD73311 is not set # # SoC audio support diff --git a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig index 51c0b6f97798..fe4e67debaca 100644 --- a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,25 +115,17 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set -# CONFIG_BF542 is not set -# CONFIG_BF544 is not set -# CONFIG_BF548 is not set -# CONFIG_BF549 is not set CONFIG_BF561=y -# CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_ANY is not set -# CONFIG_BF_REV_NONE is not set CONFIG_BFIN_DUAL_CORE=y # CONFIG_BFIN533_EZKIT is not set # CONFIG_BFIN533_STAMP is not set # CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set CONFIG_BFIN561_EZKIT=y # CONFIG_BFIN561_TEPLA is not set @@ -681,7 +673,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # # Ethernet (1000 Mbit) @@ -810,6 +801,7 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set +# CONFIG_BLACKFIN_DPMC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set diff --git a/trunk/arch/blackfin/configs/PNAV-10_defconfig b/trunk/arch/blackfin/configs/PNAV-10_defconfig index 983ed181c896..a783ff69ace1 100644 --- a/trunk/arch/blackfin/configs/PNAV-10_defconfig +++ b/trunk/arch/blackfin/configs/PNAV-10_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.21.3 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -114,26 +114,17 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y -# CONFIG_BF542 is not set -# CONFIG_BF544 is not set -# CONFIG_BF548 is not set -# CONFIG_BF549 is not set # CONFIG_BF561 is not set -# CONFIG_BF_REV_0_0 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_ANY is not set -# CONFIG_BF_REV_NONE is not set -CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y # CONFIG_BFIN533_EZKIT is not set # CONFIG_BFIN533_STAMP is not set # CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set # CONFIG_BFIN561_EZKIT is not set # CONFIG_BFIN561_TEPLA is not set @@ -607,7 +598,6 @@ CONFIG_BFIN_MAC=y CONFIG_BFIN_TX_DESC_NUM=100 CONFIG_BFIN_RX_DESC_NUM=100 CONFIG_BFIN_MAC_RMII=y -# CONFIG_SMSC911X is not set # # Ethernet (1000 Mbit) @@ -756,6 +746,7 @@ CONFIG_CAN_BLACKFIN=m # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set diff --git a/trunk/arch/blackfin/kernel/setup.c b/trunk/arch/blackfin/kernel/setup.c index 83060f98d15d..5b9b434c1ed9 100644 --- a/trunk/arch/blackfin/kernel/setup.c +++ b/trunk/arch/blackfin/kernel/setup.c @@ -307,20 +307,10 @@ void __init setup_arch(char **cmdline_p) init_leds(); printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n"); - if (bfin_compiled_revid() == 0xffff) - printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); - else if (bfin_compiled_revid() == -1) - printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU); - else - printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid()); - if (bfin_revid() != bfin_compiled_revid()) { - if (bfin_compiled_revid() == -1) - printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n", - bfin_revid()); - else if (bfin_compiled_revid() != 0xffff) - printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", - bfin_compiled_revid(), bfin_revid()); - } + printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid()); + if (bfin_revid() != bfin_compiled_revid()) + printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", + bfin_compiled_revid(), bfin_revid()); if (bfin_revid() < SUPPORTED_REVID) printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", CPU, bfin_revid()); diff --git a/trunk/arch/blackfin/kernel/traps.c b/trunk/arch/blackfin/kernel/traps.c index 56058b0b6d4a..aa660f32d8c8 100644 --- a/trunk/arch/blackfin/kernel/traps.c +++ b/trunk/arch/blackfin/kernel/traps.c @@ -545,8 +545,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) if (current->mm) { printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_EMERG "\n", + "BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", (void*)current->mm->start_code, (void*)current->mm->end_code, (void*)current->mm->start_data, diff --git a/trunk/arch/i386/kernel/acpi/boot.c b/trunk/arch/i386/kernel/acpi/boot.c index a574cd2c8b61..280898b045b2 100644 --- a/trunk/arch/i386/kernel/acpi/boot.c +++ b/trunk/arch/i386/kernel/acpi/boot.c @@ -621,6 +621,8 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table) static int __init acpi_parse_hpet(struct acpi_table_header *table) { struct acpi_table_hpet *hpet_tbl; + struct resource *hpet_res; + resource_size_t res_start; hpet_tbl = (struct acpi_table_hpet *)table; if (!hpet_tbl) { @@ -634,10 +636,29 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) return -1; } +#define HPET_RESOURCE_NAME_SIZE 9 + hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE); + if (hpet_res) { + memset(hpet_res, 0, sizeof(*hpet_res)); + hpet_res->name = (void *)&hpet_res[1]; + hpet_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, + "HPET %u", hpet_tbl->sequence); + hpet_res->end = (1 * 1024) - 1; + } + hpet_address = hpet_tbl->address.address; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", hpet_tbl->id, hpet_address); + res_start = hpet_address; + + if (hpet_res) { + hpet_res->start = res_start; + hpet_res->end += res_start; + insert_resource(&iomem_resource, hpet_res); + } + return 0; } #else diff --git a/trunk/arch/i386/kernel/cpu/perfctr-watchdog.c b/trunk/arch/i386/kernel/cpu/perfctr-watchdog.c index 4d26d514c56f..f0b67630b90d 100644 --- a/trunk/arch/i386/kernel/cpu/perfctr-watchdog.c +++ b/trunk/arch/i386/kernel/cpu/perfctr-watchdog.c @@ -55,45 +55,14 @@ static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); /* converts an msr to an appropriate reservation bit */ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) { - /* returns the bit offset of the performance counter register */ - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - return (msr - MSR_K7_PERFCTR0); - case X86_VENDOR_INTEL: - if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) - return (msr - MSR_ARCH_PERFMON_PERFCTR0); - - switch (boot_cpu_data.x86) { - case 6: - return (msr - MSR_P6_PERFCTR0); - case 15: - return (msr - MSR_P4_BPU_PERFCTR0); - } - } - return 0; + return wd_ops ? msr - wd_ops->perfctr : 0; } /* converts an msr to an appropriate reservation bit */ /* returns the bit offset of the event selection register */ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) { - /* returns the bit offset of the event selection register */ - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - return (msr - MSR_K7_EVNTSEL0); - case X86_VENDOR_INTEL: - if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) - return (msr - MSR_ARCH_PERFMON_EVENTSEL0); - - switch (boot_cpu_data.x86) { - case 6: - return (msr - MSR_P6_EVNTSEL0); - case 15: - return (msr - MSR_P4_BSU_ESCR0); - } - } - return 0; - + return wd_ops ? msr - wd_ops->evntsel : 0; } /* checks for a bit availability (hack for oprofile) */ diff --git a/trunk/arch/mips/kernel/smp-mt.c b/trunk/arch/mips/kernel/smp-mt.c index 19b30d6f1727..b8fa7ddd78f6 100644 --- a/trunk/arch/mips/kernel/smp-mt.c +++ b/trunk/arch/mips/kernel/smp-mt.c @@ -236,6 +236,8 @@ void __init plat_smp_setup(void) dvpe(); dmt(); + mips_mt_set_cpuoptions(); + /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); @@ -261,8 +263,6 @@ void __init plat_smp_setup(void) void __init plat_prepare_cpus(unsigned int max_cpus) { - mips_mt_set_cpuoptions(); - /* set up ipi interrupts */ if (cpu_has_vint) { set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); diff --git a/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig b/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig index 174a290ee7a9..fdf09eabe6e7 100644 --- a/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/trunk/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:54 2007 +# Linux kernel version: 2.6.20-rc5 +# Mon Jan 22 22:20:53 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_CLASSIC32=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set +# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_PPC_FPU=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -88,19 +84,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -135,18 +126,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_EMBEDDED6xx=y # CONFIG_APUS is not set # CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -# CONFIG_LINKSTATION is not set -CONFIG_MPC7448HPC2=y -# CONFIG_PPC_HOLLY is not set -# CONFIG_PPC_PRPMC2800 is not set -CONFIG_TSI108_BRIDGE=y -CONFIG_MPIC=y -CONFIG_MPIC_WEIRD=y -# CONFIG_PPC_I8259 is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set # CONFIG_PPC_MPC106 is not set @@ -155,7 +136,36 @@ CONFIG_MPIC_WEIRD=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +# CONFIG_LINKSTATION is not set +CONFIG_MPC7448HPC2=y +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_EV64360 is not set +CONFIG_TSI108_BRIDGE=y +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y # # Kernel options @@ -183,30 +193,31 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_MPIC_WEIRD=y +# CONFIG_PPC_I8259 is not set # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -231,13 +242,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -271,8 +282,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -298,16 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -325,6 +339,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -335,7 +353,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -354,16 +371,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -440,8 +460,11 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -457,12 +480,10 @@ CONFIG_SATA_MV=y # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -474,7 +495,6 @@ CONFIG_SATA_MV=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -512,14 +532,18 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -529,7 +553,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -583,8 +615,10 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -601,22 +635,29 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set CONFIG_TSI108_ETH=y # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -643,7 +684,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -660,7 +700,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -693,7 +732,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -702,11 +740,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -717,7 +760,10 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# # CONFIG_I2C is not set # @@ -730,41 +776,35 @@ CONFIG_DEVPORT=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -775,7 +815,6 @@ CONFIG_DAB=y # HID Devices # CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # # USB support @@ -793,6 +832,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -835,6 +878,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Virtualization +# + # # File systems # @@ -920,7 +967,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -950,7 +996,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -961,7 +1006,6 @@ CONFIG_MSDOS_PARTITION=y # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -969,13 +1013,10 @@ CONFIG_MSDOS_PARTITION=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -992,6 +1033,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/trunk/arch/powerpc/configs/mpc8272_ads_defconfig b/trunk/arch/powerpc/configs/mpc8272_ads_defconfig index 4a429294e4da..2af45025082f 100644 --- a/trunk/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:55 2007 +# Linux kernel version: 2.6.17-rc5 +# Fri Jul 14 20:36:35 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -10,7 +10,6 @@ CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -22,31 +21,25 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support # # CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set CONFIG_PPC_82xx=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set +# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_PPC_FPU=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -62,21 +55,14 @@ CONFIG_LOCALVERSION="powerpc8272" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_SYSCTL=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -86,19 +72,12 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -108,7 +87,6 @@ CONFIG_BASE_SMALL=0 # # Block layer # -CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -125,29 +103,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Platform support -# -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -CONFIG_MPC82xx_ADS=y CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_8272=y -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set CONFIG_CPM2=y +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_EMBEDDEDBOOT=y + +# +# Platform support +# +CONFIG_ADS8272=y # # Kernel options @@ -155,7 +121,6 @@ CONFIG_CPM2=y # CONFIG_HIGHMEM is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y @@ -163,36 +128,36 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_PC_KEYBOARD is not set CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y +# CONFIG_PPC_I8259 is not set CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set +# +# PCI Hotplug Support +# + # # Advanced setup # @@ -215,11 +180,10 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -237,15 +201,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# # CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set @@ -255,12 +219,7 @@ CONFIG_IPV6=y # CONFIG_INET6_IPCOMP is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -CONFIG_IPV6_SIT=y # CONFIG_IPV6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -268,16 +227,13 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # +# CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -297,14 +253,7 @@ CONFIG_NETFILTER=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -317,13 +266,15 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -334,7 +285,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -345,15 +295,14 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # -# Misc devices +# ATA/ATAPI/MFM/RLL support # -# CONFIG_BLINK is not set CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -365,15 +314,14 @@ CONFIG_BLK_DEV_IDEDISK=y # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -381,14 +329,29 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set # # Network device support @@ -398,6 +361,10 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -408,9 +375,6 @@ CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set # CONFIG_FIXED_PHY is not set # @@ -421,14 +385,27 @@ CONFIG_MII=y CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # -# Wireless LAN +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_FILTER is not set @@ -437,7 +414,6 @@ CONFIG_PPP_SYNC_TTY=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -455,8 +431,6 @@ CONFIG_SLHC=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -479,19 +453,11 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -519,7 +485,6 @@ CONFIG_SERIO_LIBPS2=y # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y @@ -538,16 +503,29 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # + +# +# I2C support +# # CONFIG_I2C is not set # @@ -560,44 +538,38 @@ CONFIG_HW_RANDOM=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # -# Multifunction device drivers +# Misc devices # -# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y +CONFIG_VIDEO_V4L2=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set # CONFIG_FB is not set -# CONFIG_FB_IBM_GXT4500 is not set # # Sound # # CONFIG_SOUND is not set -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - # # USB support # @@ -614,7 +586,6 @@ CONFIG_HID=y # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set @@ -623,6 +594,10 @@ CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -650,19 +625,6 @@ CONFIG_USB_GADGET=y # Real Time Clock # -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - # # File systems # @@ -683,12 +645,9 @@ CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -713,10 +672,8 @@ CONFIG_AUTOFS4_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -737,7 +694,6 @@ CONFIG_CRAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -771,7 +727,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -816,55 +771,37 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y -# CONFIG_UCC_SLOW is not set # # Library routines # -CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set +# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set CONFIG_BDI_SWITCH=y @@ -881,9 +818,6 @@ CONFIG_BDI_SWITCH=y # Cryptographic options # CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -893,12 +827,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -912,7 +841,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices diff --git a/trunk/arch/powerpc/configs/mpc8313_rdb_defconfig b/trunk/arch/powerpc/configs/mpc8313_rdb_defconfig index b7d3dffc981a..f87523716c44 100644 --- a/trunk/arch/powerpc/configs/mpc8313_rdb_defconfig +++ b/trunk/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:55 2007 +# Linux kernel version: 2.6.20 +# Wed Feb 7 22:08:04 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -87,19 +83,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,33 +122,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set CONFIG_MPC8313_RDB=y # CONFIG_MPC832x_MDS is not set -# CONFIG_MPC832x_RDB is not set -# CONFIG_MPC834x_MDS is not set +# CONFIG_MPC834x_SYS is not set # CONFIG_MPC834x_ITX is not set -# CONFIG_MPC836x_MDS is not set +# CONFIG_MPC8360E_PB is not set CONFIG_PPC_MPC831x=y # CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -185,34 +162,33 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -237,13 +213,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -277,8 +253,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -304,16 +292,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -326,13 +305,16 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -375,6 +357,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -404,13 +387,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# # CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND_CAFE is not set # -# UBI - Unsorted block images +# OneNAND Flash Device Drivers # -# CONFIG_MTD_UBI is not set +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -420,7 +407,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -440,16 +426,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -478,7 +467,6 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -526,6 +514,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -553,14 +545,18 @@ CONFIG_MD_RAID1=y # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -570,7 +566,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -620,8 +624,10 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -639,32 +645,29 @@ CONFIG_NETDEV_1000=y CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_NET_RADIO is not set # -# USB Network Adapters +# Wan interfaces # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -691,7 +694,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -708,7 +710,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -741,7 +742,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -750,6 +750,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -772,6 +776,7 @@ CONFIG_83xx_WDT=y CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -782,9 +787,11 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -811,15 +818,14 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -853,21 +859,21 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set -# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set @@ -891,7 +897,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -910,31 +915,24 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -945,18 +943,6 @@ CONFIG_DAB=y # HID Devices # CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set # # USB support @@ -971,7 +957,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -982,15 +968,9 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1021,11 +1001,44 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -1047,7 +1060,6 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1058,7 +1070,6 @@ CONFIG_USB_MON=y # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -1071,7 +1082,6 @@ CONFIG_USB_MON=y CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_FSL_USB2 is not set CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_PXA2XX is not set @@ -1088,6 +1098,10 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -1128,38 +1142,25 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers +# RTC drivers # +# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set - -# -# SPI RTC drivers -# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_V3020 is not set -# -# on-CPU RTC drivers -# - # # DMA Engine support # @@ -1175,6 +1176,10 @@ CONFIG_NET_DMA=y # CONFIG_INTEL_IOATDMA=y +# +# Virtualization +# + # # File systems # @@ -1264,7 +1269,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1294,7 +1298,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1305,7 +1308,6 @@ CONFIG_MSDOS_PARTITION=y # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1313,13 +1315,10 @@ CONFIG_MSDOS_PARTITION=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -1336,15 +1335,15 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1354,13 +1353,12 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1389,11 +1387,8 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1407,7 +1402,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/trunk/arch/powerpc/configs/mpc832x_mds_defconfig b/trunk/arch/powerpc/configs/mpc832x_mds_defconfig index 75ce78139a11..83192c0dc5bb 100644 --- a/trunk/arch/powerpc/configs/mpc832x_mds_defconfig +++ b/trunk/arch/powerpc/configs/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:55 2007 +# Linux kernel version: 2.6.21-rc5 +# Mon Apr 9 16:09:16 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -71,7 +70,6 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -87,19 +85,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,15 +124,12 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8313_RDB is not set CONFIG_MPC832x_MDS=y # CONFIG_MPC832x_RDB is not set @@ -148,17 +138,6 @@ CONFIG_MPC832x_MDS=y # CONFIG_MPC836x_MDS is not set CONFIG_PPC_MPC832x=y # CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_QUICC_ENGINE=y -# CONFIG_CPM2 is not set # # Kernel options @@ -192,8 +171,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -201,19 +178,22 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -238,6 +218,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -278,8 +259,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -305,16 +298,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -332,6 +316,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -367,10 +355,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -399,7 +389,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -447,6 +436,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -465,14 +458,18 @@ CONFIG_SCSI_WAIT_SCAN=m # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -482,7 +479,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -496,6 +501,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set # @@ -514,7 +520,10 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -526,7 +535,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set @@ -534,24 +542,33 @@ CONFIG_UCC_GETH=y # CONFIG_UGETH_NAPI is not set # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set -# CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -578,7 +595,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -595,7 +611,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -637,6 +652,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -655,6 +674,7 @@ CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -665,9 +685,11 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -692,9 +714,9 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -702,6 +724,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -729,10 +752,13 @@ CONFIG_I2C_MPC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -759,7 +785,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -787,19 +812,16 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -830,6 +852,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -872,6 +898,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -960,7 +994,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -986,7 +1019,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1007,13 +1039,11 @@ CONFIG_UCC=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Instrumentation Support @@ -1030,6 +1060,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1062,7 +1093,6 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/trunk/arch/powerpc/configs/mpc832x_rdb_defconfig b/trunk/arch/powerpc/configs/mpc832x_rdb_defconfig index 6a83b66dd99e..4a4da875fa4e 100644 --- a/trunk/arch/powerpc/configs/mpc832x_rdb_defconfig +++ b/trunk/arch/powerpc/configs/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:56 2007 +# Linux kernel version: 2.6.21-rc5 +# Mon Apr 9 16:12:43 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -71,7 +70,6 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -87,19 +85,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,15 +124,12 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set CONFIG_MPC832x_RDB=y @@ -148,17 +138,6 @@ CONFIG_MPC832x_RDB=y # CONFIG_MPC836x_MDS is not set CONFIG_PPC_MPC832x=y # CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_QUICC_ENGINE=y -# CONFIG_CPM2 is not set # # Kernel options @@ -192,8 +171,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -201,19 +178,22 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -238,6 +218,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -278,8 +259,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -305,16 +298,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -332,6 +316,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -368,10 +356,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -400,7 +390,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -448,6 +437,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -466,14 +459,18 @@ CONFIG_SCSI_WAIT_SCAN=m # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -483,7 +480,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -497,6 +502,7 @@ CONFIG_PHYLIB=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +CONFIG_ICPLUS_PHY=y # CONFIG_FIXED_PHY is not set # @@ -515,7 +521,10 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y @@ -529,7 +538,6 @@ CONFIG_E1000=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set @@ -537,34 +545,33 @@ CONFIG_UCC_GETH=y CONFIG_UGETH_NAPI=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set -# CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_NET_RADIO is not set # -# USB Network Adapters +# Wan interfaces # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -591,7 +598,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -608,7 +614,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -650,6 +655,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -673,6 +682,7 @@ CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -683,9 +693,11 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -710,17 +722,17 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -748,10 +760,13 @@ CONFIG_I2C_MPC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -778,7 +793,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -806,20 +820,17 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -834,17 +845,6 @@ CONFIG_DAB=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set - # # USB support # @@ -858,7 +858,6 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -908,11 +907,45 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -956,6 +989,10 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -998,6 +1035,14 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1089,7 +1134,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1120,7 +1164,6 @@ CONFIG_LDM_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1180,13 +1223,11 @@ CONFIG_UCC=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Instrumentation Support @@ -1203,6 +1244,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1235,7 +1277,6 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/trunk/arch/powerpc/configs/mpc834x_itx_defconfig b/trunk/arch/powerpc/configs/mpc834x_itx_defconfig index 85470b8cae09..23d8964846e0 100644 --- a/trunk/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/trunk/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:56 2007 +# Linux kernel version: 2.6.20 +# Wed Feb 7 13:12:18 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -87,19 +83,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,33 +122,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -# CONFIG_MPC832x_RDB is not set -# CONFIG_MPC834x_MDS is not set +# CONFIG_MPC834x_SYS is not set CONFIG_MPC834x_ITX=y -# CONFIG_MPC836x_MDS is not set +# CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y # CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -185,33 +161,32 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -236,13 +211,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -276,8 +251,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -303,16 +290,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -330,6 +308,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -372,6 +354,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -401,13 +384,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# # CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND_CAFE is not set # -# UBI - Unsorted block images +# OneNAND Flash Device Drivers # -# CONFIG_MTD_UBI is not set +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -417,7 +404,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -437,16 +423,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 # CONFIG_BLK_DEV_IDE is not set @@ -479,7 +468,6 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -528,6 +516,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set @@ -545,12 +537,10 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -562,7 +552,6 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -609,14 +598,18 @@ CONFIG_MD_RAID1=y # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -626,7 +619,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -646,7 +647,10 @@ CONFIG_CICADA_PHY=y # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -658,38 +662,34 @@ CONFIG_NETDEV_1000=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_NET_RADIO is not set # -# USB Network Adapters +# Wan interfaces # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -745,7 +745,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -754,6 +753,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -776,6 +779,7 @@ CONFIG_83xx_WDT=y CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -786,9 +790,11 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -815,15 +821,14 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -856,40 +861,36 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set -# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set -# CONFIG_HWMON is not set # -# Multifunction device drivers +# Hardware Monitoring support # -# CONFIG_MFD_SM501 is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -909,7 +910,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -920,7 +921,6 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set @@ -952,11 +952,29 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set +# +# USB Input Devices +# + +# +# USB HID Boot Protocol drivers +# + # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -978,7 +996,6 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -989,7 +1006,6 @@ CONFIG_USB_MON=y # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -1000,6 +1016,10 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -1040,38 +1060,25 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers +# RTC drivers # +# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set - -# -# SPI RTC drivers -# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_V3020 is not set -# -# on-CPU RTC drivers -# - # # DMA Engine support # @@ -1087,6 +1094,10 @@ CONFIG_NET_DMA=y # CONFIG_INTEL_IOATDMA=y +# +# Virtualization +# + # # File systems # @@ -1179,7 +1190,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1209,7 +1219,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1259,7 +1268,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1267,13 +1275,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -1290,8 +1295,10 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1320,11 +1327,8 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1338,7 +1342,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/trunk/arch/powerpc/configs/mpc834x_itxgp_defconfig b/trunk/arch/powerpc/configs/mpc834x_itxgp_defconfig index 704ee8b285bf..4aa666c9cb94 100644 --- a/trunk/arch/powerpc/configs/mpc834x_itxgp_defconfig +++ b/trunk/arch/powerpc/configs/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:56 2007 +# Linux kernel version: 2.6.20 +# Fri Feb 9 13:28:19 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -87,19 +83,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,33 +122,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -# CONFIG_MPC832x_RDB is not set -# CONFIG_MPC834x_MDS is not set +# CONFIG_MPC834x_SYS is not set CONFIG_MPC834x_ITX=y -# CONFIG_MPC836x_MDS is not set +# CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y # CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -185,33 +161,32 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -236,13 +211,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -276,8 +251,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -303,16 +290,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -330,6 +308,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -372,6 +354,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -401,13 +384,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# # CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND_CAFE is not set # -# UBI - Unsorted block images +# OneNAND Flash Device Drivers # -# CONFIG_MTD_UBI is not set +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -417,7 +404,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -436,16 +422,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -474,7 +463,6 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -522,6 +510,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -540,14 +532,18 @@ CONFIG_SCSI_SPI_ATTRS=y # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -557,7 +553,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -577,7 +581,10 @@ CONFIG_CICADA_PHY=y # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -589,28 +596,34 @@ CONFIG_NETDEV_1000=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -666,7 +679,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -675,6 +687,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -692,6 +708,7 @@ CONFIG_83xx_WDT=y CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -702,9 +719,11 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -731,7 +750,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -739,6 +757,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -771,39 +790,35 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set -# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set -# CONFIG_HWMON is not set # -# Multifunction device drivers +# Hardware Monitoring support # -# CONFIG_MFD_SM501 is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -826,6 +841,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -866,38 +885,25 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers +# RTC drivers # +# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set - -# -# SPI RTC drivers -# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_V3020 is not set -# -# on-CPU RTC drivers -# - # # DMA Engine support # @@ -913,6 +919,10 @@ CONFIG_NET_DMA=y # CONFIG_INTEL_IOATDMA=y +# +# Virtualization +# + # # File systems # @@ -1005,7 +1015,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1035,7 +1044,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1085,7 +1093,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1093,13 +1100,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -1116,8 +1120,10 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1146,11 +1152,8 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1164,7 +1167,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/trunk/arch/powerpc/configs/mpc834x_mds_defconfig b/trunk/arch/powerpc/configs/mpc834x_mds_defconfig index c28b3ee3cb12..2e3f8efb6ab1 100644 --- a/trunk/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/trunk/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:57 2007 +# Linux kernel version: 2.6.20 +# Thu Feb 8 01:00:48 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -87,19 +83,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,33 +122,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -# CONFIG_MPC832x_RDB is not set CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set -# CONFIG_MPC836x_MDS is not set +# CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y # CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -185,33 +162,32 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -236,13 +212,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -276,8 +252,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -303,16 +291,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -330,6 +309,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -340,7 +323,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -359,16 +341,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -377,6 +362,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -392,14 +381,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -409,7 +402,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -459,8 +460,10 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -478,22 +481,29 @@ CONFIG_NETDEV_1000=y CONFIG_GIANFAR=y # CONFIG_GFAR_NAPI is not set # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -519,7 +529,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -536,7 +545,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -569,7 +577,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -578,6 +585,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -596,6 +607,7 @@ CONFIG_83xx_WDT=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -606,9 +618,11 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -635,7 +649,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -643,6 +656,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -670,14 +684,16 @@ CONFIG_I2C_MPC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set @@ -700,7 +716,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -719,30 +734,23 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -753,7 +761,6 @@ CONFIG_DAB=y # HID Devices # CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # # USB support @@ -771,6 +778,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -813,6 +824,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Virtualization +# + # # File systems # @@ -901,7 +916,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -927,7 +941,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -938,7 +951,6 @@ CONFIG_PARTITION_ADVANCED=y # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -946,13 +958,10 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -969,8 +978,10 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -999,11 +1010,8 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1017,7 +1025,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/trunk/arch/powerpc/configs/mpc836x_mds_defconfig b/trunk/arch/powerpc/configs/mpc836x_mds_defconfig index bcbbc167f90d..921a151dc778 100644 --- a/trunk/arch/powerpc/configs/mpc836x_mds_defconfig +++ b/trunk/arch/powerpc/configs/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:57 2007 +# Linux kernel version: 2.6.21-rc5 +# Mon Apr 9 16:14:05 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -71,7 +70,6 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -87,19 +85,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,15 +124,12 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set @@ -148,17 +138,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_MPC836x_MDS=y CONFIG_PPC_MPC836x=y # CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_QUICC_ENGINE=y -# CONFIG_CPM2 is not set # # Kernel options @@ -191,8 +170,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -200,19 +177,22 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -237,6 +217,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -277,8 +258,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -304,16 +297,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -331,6 +315,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -366,10 +354,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -398,7 +388,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -446,6 +435,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -464,14 +457,18 @@ CONFIG_SCSI_WAIT_SCAN=m # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -481,7 +478,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -495,6 +500,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set # @@ -513,7 +519,10 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -525,7 +534,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set @@ -533,24 +541,33 @@ CONFIG_UCC_GETH=y # CONFIG_UGETH_NAPI is not set # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set -# CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -577,7 +594,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -594,7 +610,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -636,6 +651,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -654,6 +673,7 @@ CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -664,9 +684,11 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -691,9 +713,9 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -701,6 +723,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -728,10 +751,13 @@ CONFIG_I2C_MPC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -758,7 +784,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -786,19 +811,16 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -829,6 +851,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -871,6 +897,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -959,7 +993,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -985,7 +1018,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1006,13 +1038,11 @@ CONFIG_UCC=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Instrumentation Support @@ -1029,6 +1059,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1061,7 +1092,6 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/trunk/arch/powerpc/configs/mpc8540_ads_defconfig b/trunk/arch/powerpc/configs/mpc8540_ads_defconfig index faedcf8d64a7..17120c472304 100644 --- a/trunk/arch/powerpc/configs/mpc8540_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:58 2007 +# Linux kernel version: 2.6.20-rc5 +# Mon Jan 22 22:25:24 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_83xx is not set CONFIG_PPC_85xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set +# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_85xx=y CONFIG_E500=y @@ -46,7 +46,6 @@ CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y -# CONFIG_PPC_MM_SLICES is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -89,19 +85,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -128,33 +119,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set CONFIG_MPC8540_ADS=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8544_DS is not set CONFIG_MPC8540=y -CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -183,31 +158,31 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set +# +# PCI Hotplug Support +# + # # Advanced setup # @@ -230,13 +205,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -270,8 +245,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -297,16 +284,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -319,13 +297,16 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -336,7 +317,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -350,13 +330,18 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_BLINK is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -365,13 +350,35 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -381,6 +388,10 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -401,16 +412,29 @@ CONFIG_PHYLIB=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y -CONFIG_NETDEV_10000=y # -# Wireless LAN +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -434,7 +458,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -451,7 +474,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -475,7 +497,6 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support @@ -483,7 +504,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -492,11 +512,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -504,6 +529,10 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set + +# +# I2C support +# # CONFIG_I2C is not set # @@ -516,41 +545,35 @@ CONFIG_GEN_RTC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -561,7 +584,6 @@ CONFIG_DAB=y # HID Devices # CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # # USB support @@ -578,6 +600,10 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -619,6 +645,10 @@ CONFIG_HID=y # DMA Devices # +# +# Virtualization +# + # # File systems # @@ -704,7 +734,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -730,7 +759,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -741,7 +769,6 @@ CONFIG_PARTITION_ADVANCED=y # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -749,13 +776,10 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -772,15 +796,15 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -789,10 +813,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set diff --git a/trunk/arch/powerpc/configs/mpc8544_ds_defconfig b/trunk/arch/powerpc/configs/mpc8544_ds_defconfig index c40a25a79cbb..b563513cc96c 100644 --- a/trunk/arch/powerpc/configs/mpc8544_ds_defconfig +++ b/trunk/arch/powerpc/configs/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:58 2007 +# Linux kernel version: 2.6.21-rc3 +# Mon Mar 19 17:18:49 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -46,7 +46,6 @@ CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y # CONFIG_PHYS_64BIT is not set # CONFIG_SPE is not set -# CONFIG_PPC_MM_SLICES is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,7 +73,6 @@ CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -92,19 +90,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -136,32 +129,19 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set CONFIG_MPC8544_DS=y CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -196,25 +176,27 @@ CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="root=/dev/sda3 rw console=ttyS0,115200" # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # +# +# PCI Hotplug Support +# + # # Advanced setup # @@ -237,6 +219,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -287,13 +270,25 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -319,17 +314,8 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_FIB_RULES=y - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set +CONFIG_FIB_RULES=y # # Device Drivers @@ -348,6 +334,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -378,7 +368,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -407,7 +400,6 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -423,6 +415,10 @@ CONFIG_SCSI_WAIT_SCAN=m # # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_PATA_PLATFORM is not set @@ -431,7 +427,25 @@ CONFIG_ATA=y # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -441,6 +455,10 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -461,16 +479,29 @@ CONFIG_VITESSE_PHY=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y -CONFIG_NETDEV_10000=y # -# Wireless LAN +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -494,7 +525,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -511,7 +541,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -542,7 +571,6 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support @@ -559,11 +587,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -571,6 +604,10 @@ CONFIG_GEN_RTC_X=y # TPM devices # # CONFIG_TCG_TPM is not set + +# +# I2C support +# # CONFIG_I2C is not set # @@ -583,7 +620,12 @@ CONFIG_GEN_RTC_X=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Multifunction device drivers @@ -594,9 +636,13 @@ CONFIG_GEN_RTC_X=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +CONFIG_DVB=y CONFIG_DVB_CORE=m # CONFIG_DVB_CORE_ATTACH is not set -CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends @@ -630,18 +676,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Miscellaneous devices # -CONFIG_DAB=y # # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -677,6 +716,10 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -716,28 +759,16 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# # -# SPI RTC drivers -# - -# -# Platform RTC drivers +# RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set -# -# on-CPU RTC drivers -# - # # DMA Engine support # @@ -751,6 +782,14 @@ CONFIG_RTC_INTF_DEV=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -851,7 +890,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -881,7 +919,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -931,7 +968,6 @@ CONFIG_NLS_UTF8=m # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -939,14 +975,12 @@ CONFIG_NLS_UTF8=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Instrumentation Support @@ -964,6 +998,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -985,7 +1020,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1020,7 +1054,6 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/trunk/arch/powerpc/configs/mpc8560_ads_defconfig b/trunk/arch/powerpc/configs/mpc8560_ads_defconfig index a30bc6f6211c..ecaa267a853c 100644 --- a/trunk/arch/powerpc/configs/mpc8560_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:58 2007 +# Linux kernel version: 2.6.20-rc5 +# Mon Jan 22 22:25:53 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -20,7 +20,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y -CONFIG_PPC_UDBG_16550=y +# CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_83xx is not set CONFIG_PPC_85xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set +# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_85xx=y CONFIG_E500=y @@ -46,7 +46,6 @@ CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y -# CONFIG_PPC_MM_SLICES is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -89,19 +85,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -128,33 +119,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CPM2=y +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8540_ADS is not set CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8544_DS is not set CONFIG_MPC8560=y -CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_CPM2=y # # Kernel options @@ -172,6 +148,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_PC_KEYBOARD is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -183,33 +160,32 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set CONFIG_PCI_DEBUG=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -234,13 +210,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -274,8 +250,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -301,16 +289,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -323,13 +302,16 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -340,7 +322,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -359,16 +340,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -377,6 +361,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -392,14 +380,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -409,7 +401,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -444,7 +444,10 @@ CONFIG_MII=y CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y @@ -458,28 +461,34 @@ CONFIG_E1000_NAPI=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -505,7 +514,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -522,7 +530,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -566,11 +573,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -581,7 +593,10 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# # CONFIG_I2C is not set # @@ -594,41 +609,35 @@ CONFIG_DEVPORT=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -639,7 +648,6 @@ CONFIG_DAB=y # HID Devices # CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # # USB support @@ -657,6 +665,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -699,6 +711,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Virtualization +# + # # File systems # @@ -784,7 +800,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -810,7 +825,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -821,7 +835,6 @@ CONFIG_PARTITION_ADVANCED=y # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -829,13 +842,10 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -852,15 +862,15 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -869,10 +879,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set # CONFIG_BDI_SWITCH is not set diff --git a/trunk/arch/powerpc/configs/mpc8568mds_defconfig b/trunk/arch/powerpc/configs/mpc8568mds_defconfig index 6451d4dd28a0..7b3800674cbf 100644 --- a/trunk/arch/powerpc/configs/mpc8568mds_defconfig +++ b/trunk/arch/powerpc/configs/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:59 2007 +# Linux kernel version: 2.6.20 +# Sat Feb 17 16:26:53 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -46,7 +46,6 @@ CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y -# CONFIG_PPC_MM_SLICES is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,10 +70,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -87,19 +84,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -131,32 +123,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=y -# CONFIG_MPC8544_DS is not set CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -190,26 +168,28 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set +# +# PCI Hotplug Support +# + # # Advanced setup # @@ -232,6 +212,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -272,8 +253,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -299,16 +292,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -328,6 +312,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -338,7 +326,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -352,13 +339,17 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -387,7 +378,6 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -403,13 +393,35 @@ CONFIG_SCSI_WAIT_SCAN=m # # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -419,6 +431,10 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -439,16 +455,29 @@ CONFIG_MARVELL_PHY=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y -CONFIG_NETDEV_10000=y # -# Wireless LAN +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -472,7 +501,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -489,7 +517,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -513,7 +540,6 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support @@ -530,6 +556,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -542,6 +572,7 @@ CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -549,8 +580,11 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -566,8 +600,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -595,14 +629,16 @@ CONFIG_I2C_MPC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set @@ -625,7 +661,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -641,30 +676,23 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -692,6 +720,10 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -733,6 +765,14 @@ CONFIG_HID=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -821,7 +861,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -847,7 +886,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -858,7 +896,6 @@ CONFIG_PARTITION_ADVANCED=y # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -866,13 +903,11 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Instrumentation Support @@ -891,9 +926,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -908,10 +943,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set # CONFIG_BDI_SWITCH is not set @@ -925,7 +958,6 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set # CONFIG_PPC_EARLY_DEBUG_BEAT is not set -# CONFIG_PPC_EARLY_DEBUG_44x is not set # # Security options @@ -955,7 +987,6 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/trunk/arch/powerpc/configs/mpc85xx_cds_defconfig b/trunk/arch/powerpc/configs/mpc85xx_cds_defconfig index d9afe7009d99..1f61bce33e32 100644 --- a/trunk/arch/powerpc/configs/mpc85xx_cds_defconfig +++ b/trunk/arch/powerpc/configs/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:59 2007 +# Linux kernel version: 2.6.20-rc5 +# Mon Jan 22 22:26:46 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_83xx is not set CONFIG_PPC_85xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set +# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_85xx=y CONFIG_E500=y @@ -46,7 +46,6 @@ CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y -# CONFIG_PPC_MM_SLICES is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -64,17 +63,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -89,19 +85,14 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -128,33 +119,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set CONFIG_MPC85xx_CDS=y -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8544_DS is not set CONFIG_MPC8540=y -CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -183,33 +158,32 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -234,13 +208,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -274,8 +248,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -301,16 +287,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -323,13 +300,16 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -340,7 +320,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -359,16 +338,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -383,7 +365,6 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes @@ -391,13 +372,12 @@ CONFIG_IDE_PROC_FS=y CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -411,7 +391,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -422,10 +401,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -434,6 +413,10 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -449,14 +432,18 @@ CONFIG_BLK_DEV_IDEDMA=y # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -466,7 +453,15 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -498,7 +493,10 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y @@ -512,28 +510,34 @@ CONFIG_E1000_NAPI=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -559,7 +563,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -576,7 +579,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -601,7 +603,6 @@ CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support @@ -610,7 +611,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -619,11 +619,16 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -634,7 +639,10 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# # CONFIG_I2C is not set # @@ -647,41 +655,35 @@ CONFIG_DEVPORT=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -692,7 +694,6 @@ CONFIG_DAB=y # HID Devices # CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # # USB support @@ -710,6 +711,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -752,6 +757,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Virtualization +# + # # File systems # @@ -837,7 +846,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -863,7 +871,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -874,7 +881,6 @@ CONFIG_PARTITION_ADVANCED=y # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -882,13 +888,10 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -905,15 +908,15 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -922,10 +925,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set diff --git a/trunk/arch/powerpc/configs/mpc8641_hpcn_defconfig b/trunk/arch/powerpc/configs/mpc8641_hpcn_defconfig index 1ac94a605b05..53fcd6932f5b 100644 --- a/trunk/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/trunk/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:57:00 2007 +# Linux kernel version: 2.6.20-rc5 +# Mon Jan 22 22:27:14 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -24,7 +24,7 @@ CONFIG_PPC_UDBG_16550=y CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set CONFIG_PPC_86xx=y -# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set +# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_PPC_FPU=y @@ -45,7 +45,6 @@ CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y -# CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -71,11 +70,9 @@ CONFIG_LOCALVERSION="" # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -90,19 +87,14 @@ CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -129,28 +121,15 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y # -# Platform support +# Platform Support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set CONFIG_MPC8641_HPCN=y CONFIG_MPC8641=y -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -180,34 +159,33 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y -CONFIG_FSL_PCIE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # CONFIG_HOTPLUG_PCI is not set # @@ -232,13 +210,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -256,7 +234,7 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y @@ -269,7 +247,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set @@ -285,8 +262,20 @@ CONFIG_IPV6_SIT=y # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -312,16 +301,7 @@ CONFIG_IPV6_SIT=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -334,13 +314,16 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -351,7 +334,6 @@ CONFIG_FW_LOADER=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -370,16 +352,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -388,6 +373,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # @@ -403,14 +392,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set # # Network device support @@ -420,7 +413,15 @@ CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# ARCnet devices +# # CONFIG_ARCNET is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -452,7 +453,10 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -CONFIG_NETDEV_1000=y + +# +# Ethernet (1000 Mbit) +# # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -464,28 +468,34 @@ CONFIG_NETDEV_1000=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y # CONFIG_GFAR_NAPI is not set # CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y + +# +# Ethernet (10000 Mbit) +# # CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set + +# +# Token Ring devices +# # CONFIG_TR is not set # -# Wireless LAN +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -511,7 +521,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -528,7 +537,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -573,7 +581,6 @@ CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set @@ -581,10 +588,15 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -595,9 +607,11 @@ CONFIG_UNIX98_PTYS=y # TPM devices # # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y + +# +# I2C support +# CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # @@ -624,13 +638,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -658,30 +672,27 @@ CONFIG_SENSORS_EEPROM=y # Dallas's 1-wire bus # # CONFIG_W1 is not set -# CONFIG_HWMON is not set # -# Multifunction device drivers +# Hardware Monitoring support # -# CONFIG_MFD_SM501 is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -691,6 +702,7 @@ CONFIG_DAB=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -701,7 +713,6 @@ CONFIG_DUMMY_CONSOLE=y # HID Devices # CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # # USB support @@ -719,6 +730,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -761,6 +776,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Virtualization +# + # # File systems # @@ -850,7 +869,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -881,7 +899,6 @@ CONFIG_LDM_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -931,7 +948,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Distributed Lock Manager # # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -939,13 +955,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y +CONFIG_IOMAP_COPY=y # # Instrumentation Support @@ -962,15 +975,15 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -980,10 +993,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set diff --git a/trunk/arch/powerpc/configs/mpc866_ads_defconfig b/trunk/arch/powerpc/configs/mpc866_ads_defconfig index e6b18ea8f643..539d9e3d3668 100644 --- a/trunk/arch/powerpc/configs/mpc866_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:57:00 2007 +# Linux kernel version: 2.6.19-rc6 +# Fri Nov 24 21:13:55 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -10,7 +10,6 @@ CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -29,6 +28,7 @@ CONFIG_AUDIT_ARCH=y # Processor support # # CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set @@ -40,7 +40,6 @@ CONFIG_PPC_8xx=y CONFIG_8xx=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set -# CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -59,17 +58,14 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -82,19 +78,14 @@ CONFIG_PRINTK=y CONFIG_ELF_CORE=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 +# CONFIG_SLOB is not set # # Loadable module support @@ -121,14 +112,13 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_MPIC is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y # CONFIG_MPC8XXFADS is not set CONFIG_MPC86XADS=y @@ -147,18 +137,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_USB_SOF_UCODE_PATCH is not set # CONFIG_I2C_SPI_UCODE_PATCH is not set # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -166,7 +144,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_HIGHMEM is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y @@ -187,28 +164,30 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_QSPAN is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # +# +# PCI Hotplug Support +# + # # Advanced setup # @@ -233,13 +212,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -267,14 +246,25 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -300,16 +290,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -326,6 +307,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -336,7 +321,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -347,13 +331,18 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_BLINK is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -362,13 +351,34 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set # # Network device support @@ -378,6 +388,10 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -390,7 +404,6 @@ CONFIG_PHYLIB=y # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set CONFIG_FIXED_PHY=y CONFIG_FIXED_MII_10_FDX=y CONFIG_FIXED_MII_100_FDX=y @@ -404,14 +417,27 @@ CONFIG_MII=y CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # -# Wireless LAN +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -435,7 +461,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -461,16 +486,9 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -498,7 +516,6 @@ CONFIG_SERIO_LIBPS2=y # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y @@ -516,18 +533,31 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set + +# +# I2C support +# # CONFIG_I2C is not set # @@ -540,53 +570,39 @@ CONFIG_GEN_RTC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set -# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - # # USB support # @@ -602,6 +618,10 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -732,7 +752,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -762,33 +781,21 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support # # CONFIG_NLS is not set -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set - # # Library routines # -CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Instrumentation Support @@ -802,9 +809,11 @@ CONFIG_HAS_DMA=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/trunk/arch/powerpc/configs/mpc885_ads_defconfig b/trunk/arch/powerpc/configs/mpc885_ads_defconfig index fc4f9b766aa7..e2c17d8da4fc 100644 --- a/trunk/arch/powerpc/configs/mpc885_ads_defconfig +++ b/trunk/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:57:01 2007 +# Linux kernel version: 2.6.19-rc4 +# Fri Nov 10 21:30:40 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -10,7 +10,6 @@ CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -29,6 +28,7 @@ CONFIG_AUDIT_ARCH=y # Processor support # # CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set @@ -38,9 +38,6 @@ CONFIG_PPC_8xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_8xx=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -# CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -59,17 +56,14 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -82,19 +76,14 @@ CONFIG_PRINTK=y CONFIG_ELF_CORE=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y CONFIG_SHMEM=y -# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 +# CONFIG_SLOB is not set # # Loadable module support @@ -121,26 +110,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_MPIC is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y # CONFIG_MPC8XXFADS is not set # CONFIG_MPC86XADS is not set CONFIG_MPC885ADS=y -# -# Freescale Ethernet driver platform-specific options -# -CONFIG_MPC8xx_SECOND_ETH=y -CONFIG_MPC8xx_SECOND_ETH_FEC2=y -# CONFIG_MPC8xx_SECOND_ETH_SCC3 is not set - # # MPC8xx CPM Options # @@ -154,18 +135,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_USB_SOF_UCODE_PATCH is not set # CONFIG_I2C_SPI_UCODE_PATCH is not set # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # # Kernel options @@ -173,7 +142,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_HIGHMEM is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y @@ -194,28 +162,30 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_QSPAN is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # +# +# PCI Hotplug Support +# + # # Advanced setup # @@ -240,13 +210,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -274,14 +244,25 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -307,16 +288,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set # # Device Drivers @@ -333,6 +305,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# # CONFIG_MTD is not set # @@ -343,7 +319,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNPACPI is not set # # Block devices @@ -354,13 +329,18 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -# CONFIG_BLINK is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# # CONFIG_IDE is not set # @@ -369,13 +349,34 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # CONFIG_ATA is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set # # Network device support @@ -385,6 +386,10 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set + +# +# PHY device support +# CONFIG_PHYLIB=y # @@ -397,7 +402,6 @@ CONFIG_DAVICOM_PHY=y # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set CONFIG_FIXED_PHY=y CONFIG_FIXED_MII_10_FDX=y # CONFIG_FIXED_MII_100_FDX is not set @@ -411,14 +415,27 @@ CONFIG_MII=y CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # -# Wireless LAN +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -442,7 +459,6 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -468,16 +484,9 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -505,7 +514,6 @@ CONFIG_SERIO_LIBPS2=y # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y @@ -523,18 +531,31 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set # CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set + +# +# I2C support +# # CONFIG_I2C is not set # @@ -547,53 +568,39 @@ CONFIG_GEN_RTC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set + +# +# Hardware Monitoring support +# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y # -# Graphics support +# Digital Video Broadcasting Devices # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DVB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set -# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - # # USB support # @@ -609,6 +616,10 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# # CONFIG_MMC is not set # @@ -739,7 +750,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -769,33 +779,21 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set # # Native Language Support # # CONFIG_NLS is not set -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set - # # Library routines # -CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y # # Instrumentation Support @@ -809,9 +807,11 @@ CONFIG_HAS_DMA=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/trunk/arch/powerpc/kernel/irq.c b/trunk/arch/powerpc/kernel/irq.c index c2b84c64db20..42c8ed6ed528 100644 --- a/trunk/arch/powerpc/kernel/irq.c +++ b/trunk/arch/powerpc/kernel/irq.c @@ -412,12 +412,6 @@ struct irq_map_entry irq_map[NR_IRQS]; static unsigned int irq_virq_count = NR_IRQS; static struct irq_host *irq_default_host; -irq_hw_number_t virq_to_hw(unsigned int virq) -{ - return irq_map[virq].hwirq; -} -EXPORT_SYMBOL_GPL(virq_to_hw); - struct irq_host *irq_alloc_host(unsigned int revmap_type, unsigned int revmap_arg, struct irq_host_ops *ops, diff --git a/trunk/arch/powerpc/platforms/cell/cbe_cpufreq.c b/trunk/arch/powerpc/platforms/cell/cbe_cpufreq.c index ab511d5b65a4..ac445998d831 100644 --- a/trunk/arch/powerpc/platforms/cell/cbe_cpufreq.c +++ b/trunk/arch/powerpc/platforms/cell/cbe_cpufreq.c @@ -74,7 +74,6 @@ static unsigned int pmi_frequency_limit = 0; static struct of_device *pmi_dev; -#ifdef CONFIG_PPC_PMI static int set_pmode_pmi(int cpu, unsigned int pmode) { int ret; @@ -103,7 +102,7 @@ static int set_pmode_pmi(int cpu, unsigned int pmode) #endif return ret; } -#endif + static int get_pmode(int cpu) { @@ -158,11 +157,9 @@ static int set_pmode_reg(int cpu, unsigned int pmode) } static int set_pmode(int cpu, unsigned int slow_mode) { -#ifdef CONFIG_PPC_PMI if (pmi_dev) return set_pmode_pmi(cpu, slow_mode); else -#endif return set_pmode_reg(cpu, slow_mode); } @@ -326,28 +323,26 @@ static struct cpufreq_driver cbe_cpufreq_driver = { static int __init cbe_cpufreq_init(void) { -#ifdef CONFIG_PPC_PMI struct device_node *np; -#endif + if (!machine_is(cell)) return -ENODEV; -#ifdef CONFIG_PPC_PMI + np = of_find_node_by_type(NULL, "ibm,pmi"); pmi_dev = of_find_device_by_node(np); if (pmi_dev) pmi_register_handler(pmi_dev, &cbe_pmi_handler); -#endif + return cpufreq_register_driver(&cbe_cpufreq_driver); } static void __exit cbe_cpufreq_exit(void) { -#ifdef CONFIG_PPC_PMI if (pmi_dev) pmi_unregister_handler(pmi_dev, &cbe_pmi_handler); -#endif + cpufreq_unregister_driver(&cbe_cpufreq_driver); } diff --git a/trunk/drivers/acpi/osl.c b/trunk/drivers/acpi/osl.c index 2e7ba615d760..58ceb18ec997 100644 --- a/trunk/drivers/acpi/osl.c +++ b/trunk/drivers/acpi/osl.c @@ -999,11 +999,11 @@ static int __init acpi_osi_setup(char *str) if (str == NULL || *str == '\0') { printk(KERN_INFO PREFIX "_OSI method disabled\n"); acpi_gbl_create_osi_method = FALSE; - } else if (!strcmp("!Linux", str)) { - enable_osi_linux(0); } else if (*str == '!') { if (acpi_osi_invalidate(++str) == AE_OK) printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str); + } else if (!strcmp("!Linux", str)) { + enable_osi_linux(0); } else if (!strcmp("Linux", str)) { enable_osi_linux(1); } else if (*osi_additional_string == '\0') { diff --git a/trunk/drivers/ata/Kconfig b/trunk/drivers/ata/Kconfig index 4ad8675f5a16..b4a8d6030e48 100644 --- a/trunk/drivers/ata/Kconfig +++ b/trunk/drivers/ata/Kconfig @@ -16,11 +16,6 @@ menuconfig ATA that "speaks" the ATA protocol, also called ATA controller), because you will be asked for it. - NOTE: ATA enables basic SCSI support; *however*, - 'SCSI disk support', 'SCSI tape support', or - 'SCSI CDROM support' may also be needed, - depending on your hardware configuration. - if ATA config ATA_NONSTANDARD diff --git a/trunk/drivers/ata/ata_generic.c b/trunk/drivers/ata/ata_generic.c index 4c6e95c95e4a..7565f022bd69 100644 --- a/trunk/drivers/ata/ata_generic.c +++ b/trunk/drivers/ata/ata_generic.c @@ -50,7 +50,7 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused) /* Bits 5 and 6 indicate if DMA is active on master/slave */ if (ap->ioaddr.bmdma_addr) - dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; diff --git a/trunk/drivers/ata/libata-core.c b/trunk/drivers/ata/libata-core.c index 981b397cb46b..bfc59a104728 100644 --- a/trunk/drivers/ata/libata-core.c +++ b/trunk/drivers/ata/libata-core.c @@ -3798,7 +3798,6 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Drives which do spurious command completion */ { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, }, { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, }, - { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, }, { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, /* Devices with NCQ limits */ @@ -4782,6 +4781,8 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) } else ata_qc_complete(qc); } + + ata_altstatus(ap); /* flush */ } /** @@ -6423,14 +6424,14 @@ int ata_host_activate(struct ata_host *host, int irq, if (rc) return rc; - /* Used to print device info at probe */ - host->irq = irq; - rc = ata_host_register(host, sht); /* if failed, just free the IRQ and leave ports alone */ if (rc) devm_free_irq(host->dev, irq, host); + /* Used to print device info at probe */ + host->irq = irq; + return rc; } diff --git a/trunk/drivers/ata/libata-sff.c b/trunk/drivers/ata/libata-sff.c index fa1c22c7b38f..ce84805ba5f1 100644 --- a/trunk/drivers/ata/libata-sff.c +++ b/trunk/drivers/ata/libata-sff.c @@ -1065,11 +1065,10 @@ int ata_pci_init_one(struct pci_dev *pdev, if (rc) goto err_out; - if (!legacy_mode) { + if (!legacy_mode) rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); - host->irq = pdev->irq; - } else { + else { irq_handler_t handler[2] = { host->ops->irq_handler, host->ops->irq_handler }; unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED }; diff --git a/trunk/drivers/ata/pata_ali.c b/trunk/drivers/ata/pata_ali.c index 75e95bdbe02f..3c55a5ff74c7 100644 --- a/trunk/drivers/ata/pata_ali.c +++ b/trunk/drivers/ata/pata_ali.c @@ -550,22 +550,22 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x1f, .port_ops = &ali_c2_port_ops }; - /* Revision 0xC3 is UDMA66 for now */ + /* Revision 0xC3 is UDMA100 */ static const struct ata_port_info info_c3 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, .mwdma_mask = 0x07, - .udma_mask = 0x1f, + .udma_mask = 0x3f, .port_ops = &ali_c2_port_ops }; - /* Revision 0xC4 is UDMA100 */ + /* Revision 0xC4 is UDMA133 */ static const struct ata_port_info info_c4 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, .mwdma_mask = 0x07, - .udma_mask = 0x3f, + .udma_mask = 0x7f, .port_ops = &ali_c2_port_ops }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ diff --git a/trunk/drivers/ata/pata_cs5520.c b/trunk/drivers/ata/pata_cs5520.c index 00cf0134079c..1aabe15ad9d3 100644 --- a/trunk/drivers/ata/pata_cs5520.c +++ b/trunk/drivers/ata/pata_cs5520.c @@ -284,11 +284,6 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi ata_interrupt, 0, DRV_NAME, host); if (rc) return rc; - - if (i == 0) - host->irq = irq[0]; - else - host->irq2 = irq[1]; } return ata_host_register(host, &cs5520_sht); diff --git a/trunk/drivers/ata/pata_pcmcia.c b/trunk/drivers/ata/pata_pcmcia.c index a56257c98fe5..4d44c7555db1 100644 --- a/trunk/drivers/ata/pata_pcmcia.c +++ b/trunk/drivers/ata/pata_pcmcia.c @@ -129,7 +129,7 @@ static struct ata_port_operations pcmcia_port_ops = { .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, - .port_start = ata_sff_port_start, + .port_start = ata_port_start, }; #define CS_CHECK(fn, ret) \ diff --git a/trunk/drivers/ata/pata_pdc2027x.c b/trunk/drivers/ata/pata_pdc2027x.c index 69a5aa4949f5..0d2cc49fde4b 100644 --- a/trunk/drivers/ata/pata_pdc2027x.c +++ b/trunk/drivers/ata/pata_pdc2027x.c @@ -689,12 +689,10 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; u32 scr; long start_count, end_count; - struct timeval start_time, end_time; - long pll_clock, usec_elapsed; + long pll_clock; /* Read current counter value */ start_count = pdc_read_counter(host); - do_gettimeofday(&start_time); /* Start the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); @@ -707,7 +705,6 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) /* Read the counter values again */ end_count = pdc_read_counter(host); - do_gettimeofday(&end_time); /* Stop the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); @@ -716,11 +713,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) readl(mmio_base + PDC_SYS_CTL); /* flush */ /* calculate the input clock in Hz */ - usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + - (end_time.tv_usec - start_time.tv_usec); - - pll_clock = (start_count - end_count) / 100 * - (100000000 / usec_elapsed); + pll_clock = (start_count - end_count) * 10; PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock); diff --git a/trunk/drivers/ata/pata_pdc202xx_old.c b/trunk/drivers/ata/pata_pdc202xx_old.c index d277246b7337..edbaf9d653b8 100644 --- a/trunk/drivers/ata/pata_pdc202xx_old.c +++ b/trunk/drivers/ata/pata_pdc202xx_old.c @@ -31,8 +31,8 @@ static int pdc2026x_cable_detect(struct ata_port *ap) pci_read_config_word(pdev, 0x50, &cis); if (cis & (1 << (10 + ap->port_no))) - return ATA_CBL_PATA40; - return ATA_CBL_PATA80; + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; } /** diff --git a/trunk/drivers/ata/pata_sis.c b/trunk/drivers/ata/pata_sis.c index cfe4ec6eb3d5..ec3ae9375015 100644 --- a/trunk/drivers/ata/pata_sis.c +++ b/trunk/drivers/ata/pata_sis.c @@ -560,40 +560,6 @@ static const struct ata_port_operations sis_133_ops = { .port_start = ata_port_start, }; -static const struct ata_port_operations sis_133_for_sata_ops = { - .port_disable = ata_port_disable, - .set_piomode = sis_133_set_piomode, - .set_dmamode = sis_133_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = sis_133_cable_detect, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - - .port_start = ata_port_start, -}; - static const struct ata_port_operations sis_133_early_ops = { .port_disable = ata_port_disable, .set_piomode = sis_100_set_piomode, @@ -767,20 +733,13 @@ static const struct ata_port_info sis_info100_early = { .pio_mask = 0x1f, /* pio0-4 */ .port_ops = &sis_66_ops, }; -static const struct ata_port_info sis_info133 = { +const struct ata_port_info sis_info133 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; -const struct ata_port_info sis_info133_for_sata = { - .sht = &sis_sht, - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = ATA_UDMA6, - .port_ops = &sis_133_for_sata_ops, -}; static const struct ata_port_info sis_info133_early = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -790,7 +749,7 @@ static const struct ata_port_info sis_info133_early = { }; /* Privately shared with the SiS180 SATA driver, not for use elsewhere */ -EXPORT_SYMBOL_GPL(sis_info133_for_sata); +EXPORT_SYMBOL_GPL(sis_info133); static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) { @@ -1016,7 +975,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static const struct pci_device_id sis_pci_tbl[] = { { PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */ { PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */ - { PCI_VDEVICE(SI, 0x1180), }, /* SiS 1180 */ { } }; diff --git a/trunk/drivers/ata/sata_inic162x.c b/trunk/drivers/ata/sata_inic162x.c index dc3bbce04676..2d80c9d95e95 100644 --- a/trunk/drivers/ata/sata_inic162x.c +++ b/trunk/drivers/ata/sata_inic162x.c @@ -496,13 +496,6 @@ static void inic_dev_config(struct ata_device *dev) /* inic can only handle upto LBA28 max sectors */ if (dev->max_sectors > ATA_MAX_SECTORS) dev->max_sectors = ATA_MAX_SECTORS; - - if (dev->n_sectors >= 1 << 28) { - ata_dev_printk(dev, KERN_ERR, - "ERROR: This driver doesn't support LBA48 yet and may cause\n" - " data corruption on such devices. Disabling.\n"); - ata_dev_disable(dev); - } } static void init_port(struct ata_port *ap) diff --git a/trunk/drivers/ata/sata_mv.c b/trunk/drivers/ata/sata_mv.c index 590f2f92b4e0..c957e6e54ba1 100644 --- a/trunk/drivers/ata/sata_mv.c +++ b/trunk/drivers/ata/sata_mv.c @@ -582,9 +582,6 @@ static const struct pci_device_id mv_pci_tbl[] = { { PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x }, - /* Adaptec 1430SA */ - { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 }, - { PCI_VDEVICE(TTI, 0x2310), chip_7042 }, /* add Marvell 7042 support */ diff --git a/trunk/drivers/ata/sata_nv.c b/trunk/drivers/ata/sata_nv.c index b2656867c647..adfa693db53d 100644 --- a/trunk/drivers/ata/sata_nv.c +++ b/trunk/drivers/ata/sata_nv.c @@ -325,7 +325,6 @@ static struct scsi_host_template nv_adma_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, - .change_queue_depth = ata_scsi_change_queue_depth, .can_queue = NV_ADMA_MAX_CPBS, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN, diff --git a/trunk/drivers/ata/sata_sis.c b/trunk/drivers/ata/sata_sis.c index f111c984a359..221099d1d08f 100644 --- a/trunk/drivers/ata/sata_sis.c +++ b/trunk/drivers/ata/sata_sis.c @@ -72,8 +72,8 @@ static const struct pci_device_id sis_pci_tbl[] = { { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */ { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */ { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */ - { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */ - { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */ + { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */ + { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */ { } /* terminate list */ }; @@ -161,6 +161,7 @@ static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) case 0x0182: case 0x0183: case 0x1182: + case 0x1183: addr += SIS182_SATA1_OFS; break; } @@ -182,8 +183,8 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) pci_read_config_dword(pdev, cfg_addr, &val); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || - (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || + (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) pci_read_config_dword(pdev, cfg_addr+0x10, &val2); return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */ @@ -202,8 +203,8 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val pci_write_config_dword(pdev, cfg_addr, val); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || - (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || + (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) pci_write_config_dword(pdev, cfg_addr+0x10, val); } @@ -223,8 +224,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4)); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || - (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || + (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); return (val | val2) & 0xfffffffb; @@ -244,8 +245,8 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) sis_scr_cfg_write(ap, sc_reg, val); else { iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)); - if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || - (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED)) + if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) || + (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED)) iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); } } @@ -292,11 +293,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) /* The PATA-handling is provided by pata_sis */ switch (pmr & 0x30) { case 0x10: - ppi[1] = &sis_info133_for_sata; + ppi[1] = &sis_info133; break; case 0x30: - ppi[0] = &sis_info133_for_sata; + ppi[0] = &sis_info133; break; } if ((pmr & SIS_PMR_COMBINED) == 0) { @@ -323,14 +324,14 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) break; case 0x1182: - dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n"); - pi.flags |= ATA_FLAG_SLAVE_POSS; - break; - case 0x1183: - dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n"); - ppi[0] = &sis_info133_for_sata; - ppi[1] = &sis_info133_for_sata; + pci_read_config_dword(pdev, 0x64, &val); + if (val & 0x10000000) { + dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n"); + } else { + dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n"); + pi.flags |= ATA_FLAG_SLAVE_POSS; + } break; } diff --git a/trunk/drivers/ata/sis.h b/trunk/drivers/ata/sis.h index f7f3eebe666c..0f2208d8d5ef 100644 --- a/trunk/drivers/ata/sis.h +++ b/trunk/drivers/ata/sis.h @@ -2,4 +2,4 @@ struct ata_port_info; /* pata_sis.c */ -extern const struct ata_port_info sis_info133_for_sata; +extern const struct ata_port_info sis_info133; diff --git a/trunk/drivers/firewire/Kconfig b/trunk/drivers/firewire/Kconfig index d011a76f8e7a..396dade731f9 100644 --- a/trunk/drivers/firewire/Kconfig +++ b/trunk/drivers/firewire/Kconfig @@ -4,43 +4,26 @@ comment "An alternative FireWire stack is available with EXPERIMENTAL=y" depends on EXPERIMENTAL=n config FIREWIRE - tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL" + tristate "IEEE 1394 (FireWire) support (JUJU alternative stack, experimental)" depends on EXPERIMENTAL select CRC_ITU_T help - This is the "Juju" FireWire stack, a new alternative implementation - designed for robustness and simplicity. You can build either this - stack, or the classic stack (the ieee1394 driver, ohci1394 etc.) - or both. - - To compile this driver as a module, say M here: the module will be - called firewire-core. It functionally replaces ieee1394, raw1394, - and video1394. - - NOTE: - - You should only build ONE of the stacks, unless you REALLY know what - you are doing. If you install both, you should configure them only as - modules rather than link them statically, and you should blacklist one - of the concurrent low-level drivers in /etc/modprobe.conf. Add either - - blacklist firewire-ohci - or - blacklist ohci1394 + IEEE 1394 describes a high performance serial bus, which is also + known as FireWire(tm) or i.Link(tm) and is used for connecting all + sorts of devices (most notably digital video cameras) to your + computer. - there depending on which driver you DON'T want to have auto-loaded. - You can optionally do the same with the other IEEE 1394/ FireWire - drivers. + If you have FireWire hardware and want to use it, say Y here. This + is the core support only, you will also need to select a driver for + your IEEE 1394 adapter. - If you have an old modprobe which doesn't implement the blacklist - directive, use either - - install firewire-ohci /bin/true - or - install ohci1394 /bin/true + To compile this driver as a module, say M here: the module will be + called firewire-core. - and so on, depending on which modules you DON't want to have - auto-loaded. + This is the "JUJU" FireWire stack, an alternative implementation + designed for robustness and simplicity. You can build either this + stack, or the classic stack (the ieee1394 driver, ohci1394 etc.) + or both. config FIREWIRE_OHCI tristate "Support for OHCI FireWire host controllers" @@ -51,13 +34,11 @@ config FIREWIRE_OHCI is the only chipset in use, so say Y here. To compile this driver as a module, say M here: The module will be - called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 - stack. - - NOTE: + called firewire-ohci. - If you also build ohci1394 of the classic stack, blacklist either - ohci1394 or firewire-ohci to let hotplug load only the desired driver. + If you also build ohci1394 of the classic IEEE 1394 driver stack, + blacklist either ohci1394 or firewire-ohci to let hotplug load the + desired driver. config FIREWIRE_SBP2 tristate "Support for storage devices (SBP-2 protocol driver)" @@ -69,14 +50,12 @@ config FIREWIRE_SBP2 like scanners. To compile this driver as a module, say M here: The module will be - called firewire-sbp2. It replaces sbp2 of the classic IEEE 1394 - stack. + called firewire-sbp2. You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. - NOTE: - - If you also build sbp2 of the classic stack, blacklist either sbp2 - or firewire-sbp2 to let hotplug load only the desired driver. + If you also build sbp2 of the classic IEEE 1394 driver stack, + blacklist either sbp2 or firewire-sbp2 to let hotplug load the + desired driver. diff --git a/trunk/drivers/firewire/fw-ohci.c b/trunk/drivers/firewire/fw-ohci.c index 96c8ac5b86cc..b72a5c1f9e69 100644 --- a/trunk/drivers/firewire/fw-ohci.c +++ b/trunk/drivers/firewire/fw-ohci.c @@ -373,8 +373,8 @@ static void ar_context_tasklet(unsigned long data) offset = offsetof(struct ar_buffer, data); dma_unmap_single(ohci->card.device, - le32_to_cpu(ab->descriptor.data_address) - offset, - PAGE_SIZE, DMA_BIDIRECTIONAL); + ab->descriptor.data_address - offset, + PAGE_SIZE, DMA_BIDIRECTIONAL); buffer = ab; ab = ab->next; @@ -427,7 +427,7 @@ static void ar_context_run(struct ar_context *ctx) size_t offset; offset = offsetof(struct ar_buffer, data); - ab_bus = le32_to_cpu(ab->descriptor.data_address) - offset; + ab_bus = ab->descriptor.data_address - offset; reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ab_bus | 1); reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN); diff --git a/trunk/drivers/ide/ide-probe.c b/trunk/drivers/ide/ide-probe.c index f5ce22c38f82..41bfa4d21ab6 100644 --- a/trunk/drivers/ide/ide-probe.c +++ b/trunk/drivers/ide/ide-probe.c @@ -574,11 +574,11 @@ static inline u8 probe_for_drive (ide_drive_t *drive) /* look for ATAPI device */ (void) do_probe(drive, WIN_PIDENTIFY); } + if (strstr(drive->id->model, "E X A B Y T E N E S T")) + enable_nest(drive); if (!drive->present) /* drive not found */ return 0; - if (strstr(drive->id->model, "E X A B Y T E N E S T")) - enable_nest(drive); /* identification failed? */ if (!drive->id_read) { diff --git a/trunk/drivers/ide/ide-taskfile.c b/trunk/drivers/ide/ide-taskfile.c index aa06dafb74ac..30175c7688e8 100644 --- a/trunk/drivers/ide/ide-taskfile.c +++ b/trunk/drivers/ide/ide-taskfile.c @@ -238,7 +238,7 @@ EXPORT_SYMBOL(task_no_data_intr); static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - int retries; + int retries = 100; u8 stat; /* @@ -246,14 +246,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) * This can take up to 10 usec, but we will wait max 1 ms * (drive_cmd_intr() waits that long). */ - for (retries = 0; retries < 100; retries++) { - if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) - udelay(10); - else - break; - } + while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) + udelay(10); - if (stat & BUSY_STAT) + if (!retries) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; diff --git a/trunk/drivers/ide/pci/amd74xx.c b/trunk/drivers/ide/pci/amd74xx.c index a2be65fcf89c..9db1be826e80 100644 --- a/trunk/drivers/ide/pci/amd74xx.c +++ b/trunk/drivers/ide/pci/amd74xx.c @@ -1,5 +1,5 @@ /* - * Version 2.16 + * Version 2.15 * * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 * IDE driver for Linux. @@ -244,8 +244,10 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed) struct ide_timing t, p; int T, UT; - if (speed != XFER_PIO_SLOW) - ide_config_drive_speed(drive, speed); + if (speed != XFER_PIO_SLOW && speed != drive->current_speed) + if (ide_config_drive_speed(drive, speed)) + printk(KERN_WARNING "ide%d: Drive %d didn't accept speed setting. Oh, well.\n", + drive->dn >> 1, drive->dn & 1); T = 1000000000 / amd_clock; UT = T / min_t(int, max_t(int, amd_config->flags & AMD_UDMA, 1), 2); diff --git a/trunk/drivers/ide/pci/hpt366.c b/trunk/drivers/ide/pci/hpt366.c index c33d0b0f11c9..ce8a5449a574 100644 --- a/trunk/drivers/ide/pci/hpt366.c +++ b/trunk/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.06 Jun 27, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.04 Jun 4, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -182,7 +182,6 @@ static const char *bad_ata66_4[] = { "IC35L040AVER07-0", "IC35L060AVER07-0", "WDC AC310200R", - "MAXTOR STM3320620A", NULL }; @@ -1514,28 +1513,18 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) goto init_single; /* - * HPT36x chips have one channel per function and have - * both channel enable bits located differently and visible - * to both functions -- really stupid design decision... :-( - * Bit 4 is for the primary channel, bit 5 for the secondary. + * HPT36x chips are single channel and + * do not seem to have the channel enable bit... */ d->channels = 1; - d->enablebits[0].mask = d->enablebits[0].val = 0x10; + d->enablebits[0].reg = 0; if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) { - u8 mcr1 = 0, pin1 = 0, pin2 = 0; + u8 pin1 = 0, pin2 = 0; int ret; pci_set_drvdata(dev2, info[rev]); - /* - * Now we'll have to force both channels enabled if - * at least one of them has been enabled by BIOS... - */ - pci_read_config_byte(dev, 0x50, &mcr1); - if (mcr1 & 0x30) - pci_write_config_byte(dev, 0x50, mcr1 | 0x30); - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1); pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2); if (pin1 != pin2 && dev->irq == dev2->irq) { diff --git a/trunk/drivers/ide/pci/it821x.c b/trunk/drivers/ide/pci/it821x.c index 3aeb7f1b7916..4bd4bf02e917 100644 --- a/trunk/drivers/ide/pci/it821x.c +++ b/trunk/drivers/ide/pci/it821x.c @@ -1,6 +1,6 @@ /* - * linux/drivers/ide/pci/it821x.c Version 0.16 Jul 3 2007 + * linux/drivers/ide/pci/it821x.c Version 0.15 Jun 2 2007 * * Copyright (C) 2004 Red Hat * Copyright (C) 2007 Bartlomiej Zolnierkiewicz @@ -660,6 +660,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) hwif->ultra_mask = 0x7f; hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; hwif->ide_dma_check = &it821x_config_drive_for_dma; if (!(hwif->udma_four)) diff --git a/trunk/drivers/ide/pci/pdc202xx_new.c b/trunk/drivers/ide/pci/pdc202xx_new.c index 0765dce6948e..cc0bfdcf1f19 100644 --- a/trunk/drivers/ide/pci/pdc202xx_new.c +++ b/trunk/drivers/ide/pci/pdc202xx_new.c @@ -306,13 +306,11 @@ static long __devinit read_counter(u32 dma_base) */ static long __devinit detect_pll_input_clock(unsigned long dma_base) { - struct timeval start_time, end_time; long start_count, end_count; - long pll_input, usec_elapsed; + long pll_input; u8 scr1; start_count = read_counter(dma_base); - do_gettimeofday(&start_time); /* Start the test mode */ outb(0x01, dma_base + 0x01); @@ -324,7 +322,6 @@ static long __devinit detect_pll_input_clock(unsigned long dma_base) mdelay(10); end_count = read_counter(dma_base); - do_gettimeofday(&end_time); /* Stop the test mode */ outb(0x01, dma_base + 0x01); @@ -336,10 +333,7 @@ static long __devinit detect_pll_input_clock(unsigned long dma_base) * Calculate the input clock in Hz * (the clock counter is 30 bit wide and counts down) */ - usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + - (end_time.tv_usec - start_time.tv_usec); - pll_input = ((start_count - end_count) & 0x3ffffff) / 10 * - (10000000 / usec_elapsed); + pll_input = ((start_count - end_count) & 0x3ffffff) * 100; DBG("start[%ld] end[%ld]\n", start_count, end_count); diff --git a/trunk/drivers/ide/setup-pci.c b/trunk/drivers/ide/setup-pci.c index c88d33225cf9..67035ba4bf5e 100644 --- a/trunk/drivers/ide/setup-pci.c +++ b/trunk/drivers/ide/setup-pci.c @@ -872,15 +872,11 @@ void __init ide_scan_pcibus (int scan_direction) * are post init. */ - list_for_each_safe(l, n, &ide_pci_drivers) { + list_for_each_safe(l, n, &ide_pci_drivers) + { list_del(l); d = list_entry(l, struct pci_driver, node); - if (__pci_register_driver(d, d->driver.owner, - d->driver.mod_name)) { - printk(KERN_ERR "%s: failed to register driver " - "for %s\n", __FUNCTION__, - d->driver.mod_name); - } + __pci_register_driver(d, d->driver.owner, d->driver.mod_name); } } #endif diff --git a/trunk/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/trunk/drivers/infiniband/ulp/ipoib/ipoib_cm.c index ea74d1eaf004..5ffc464c99aa 100644 --- a/trunk/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/trunk/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -148,8 +148,8 @@ static struct sk_buff *ipoib_cm_alloc_rx_skb(struct net_device *dev, int id, int ib_dma_unmap_single(priv->ca, mapping[0], IPOIB_CM_HEAD_SIZE, DMA_FROM_DEVICE); - for (; i > 0; --i) - ib_dma_unmap_single(priv->ca, mapping[i], PAGE_SIZE, DMA_FROM_DEVICE); + for (; i >= 0; --i) + ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); return NULL; diff --git a/trunk/drivers/input/keyboard/atkbd.c b/trunk/drivers/input/keyboard/atkbd.c index 9950fcb33650..be1fe46cd308 100644 --- a/trunk/drivers/input/keyboard/atkbd.c +++ b/trunk/drivers/input/keyboard/atkbd.c @@ -219,8 +219,7 @@ struct atkbd { unsigned long time; unsigned long err_count; - struct delayed_work event_work; - unsigned long event_jiffies; + struct work_struct event_work; struct mutex event_mutex; unsigned long event_mask; }; @@ -409,10 +408,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, goto out; case ATKBD_RET_ACK: case ATKBD_RET_NAK: - if (printk_ratelimit()) - printk(KERN_WARNING "atkbd.c: Spurious %s on %s. " - "Some program might be trying access hardware directly.\n", - data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); + printk(KERN_WARNING "atkbd.c: Spurious %s on %s. " + "Some program might be trying access hardware directly.\n", + data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); goto out; case ATKBD_RET_HANGEUL: case ATKBD_RET_HANJA: @@ -567,7 +565,7 @@ static int atkbd_set_leds(struct atkbd *atkbd) static void atkbd_event_work(struct work_struct *work) { - struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); + struct atkbd *atkbd = container_of(work, struct atkbd, event_work); mutex_lock(&atkbd->event_mutex); @@ -580,31 +578,13 @@ static void atkbd_event_work(struct work_struct *work) mutex_unlock(&atkbd->event_mutex); } -/* - * Schedule switch for execution. We need to throttle requests, - * otherwise keyboard may become unresponsive. - */ -static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) -{ - unsigned long delay = msecs_to_jiffies(50); - - if (time_after(jiffies, atkbd->event_jiffies + delay)) - delay = 0; - - atkbd->event_jiffies = jiffies; - set_bit(event_bit, &atkbd->event_mask); - wmb(); - schedule_delayed_work(&atkbd->event_work, delay); -} - /* * Event callback from the input module. Events that change the state of * the hardware are processed here. If action can not be performed in * interrupt context it is offloaded to atkbd_event_work. */ -static int atkbd_event(struct input_dev *dev, - unsigned int type, unsigned int code, int value) +static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { struct atkbd *atkbd = input_get_drvdata(dev); @@ -614,12 +594,19 @@ static int atkbd_event(struct input_dev *dev, switch (type) { case EV_LED: - atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT); + set_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask); + wmb(); + schedule_work(&atkbd->event_work); return 0; case EV_REP: - if (!atkbd->softrepeat) - atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT); + + if (!atkbd->softrepeat) { + set_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask); + wmb(); + schedule_work(&atkbd->event_work); + } + return 0; } @@ -953,7 +940,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd->dev = dev; ps2_init(&atkbd->ps2dev, serio); - INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); + INIT_WORK(&atkbd->event_work, atkbd_event_work); mutex_init(&atkbd->event_mutex); switch (serio->id.type) { diff --git a/trunk/drivers/input/serio/i8042-x86ia64io.h b/trunk/drivers/input/serio/i8042-x86ia64io.h index 4fca1e7f2678..f4a2517925e4 100644 --- a/trunk/drivers/input/serio/i8042-x86ia64io.h +++ b/trunk/drivers/input/serio/i8042-x86ia64io.h @@ -199,17 +199,6 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"), }, }, - { - /* - * Like DV4017EA does not raise AUXERR for errors on MUX ports. - */ - .ident = "HP Pavilion ZT1000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"), - DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook ZT1000"), - }, - }, { .ident = "Toshiba P10", .matches = { diff --git a/trunk/drivers/input/serio/serio.c b/trunk/drivers/input/serio/serio.c index a8f3bc1dff22..5895202b972c 100644 --- a/trunk/drivers/input/serio/serio.c +++ b/trunk/drivers/input/serio/serio.c @@ -769,10 +769,8 @@ static int serio_driver_remove(struct device *dev) static void serio_cleanup(struct serio *serio) { - mutex_lock(&serio->drv_mutex); if (serio->drv && serio->drv->cleanup) serio->drv->cleanup(serio); - mutex_unlock(&serio->drv_mutex); } static void serio_shutdown(struct device *dev) diff --git a/trunk/drivers/media/dvb/cinergyT2/cinergyT2.c b/trunk/drivers/media/dvb/cinergyT2/cinergyT2.c index b40af48a2edb..6aba5b39ed14 100644 --- a/trunk/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/trunk/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -118,7 +118,6 @@ struct cinergyt2 { struct dvb_demux demux; struct usb_device *udev; struct mutex sem; - struct mutex wq_sem; struct dvb_adapter adapter; struct dvb_device *fedev; struct dmxdev dmxdev; @@ -483,14 +482,14 @@ static int cinergyt2_open (struct inode *inode, struct file *file) struct cinergyt2 *cinergyt2 = dvbdev->priv; int err = -ERESTARTSYS; - if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->wq_sem)) - goto out; + if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) + return -ERESTARTSYS; - if (mutex_lock_interruptible(&cinergyt2->sem)) - goto out_unlock1; + if ((err = dvb_generic_open(inode, file))) { + mutex_unlock(&cinergyt2->sem); + return err; + } - if ((err = dvb_generic_open(inode, file))) - goto out_unlock2; if ((file->f_flags & O_ACCMODE) != O_RDONLY) { cinergyt2_sleep(cinergyt2, 0); @@ -499,12 +498,8 @@ static int cinergyt2_open (struct inode *inode, struct file *file) atomic_inc(&cinergyt2->inuse); -out_unlock2: mutex_unlock(&cinergyt2->sem); -out_unlock1: - mutex_unlock(&cinergyt2->wq_sem); -out: - return err; + return 0; } static void cinergyt2_unregister(struct cinergyt2 *cinergyt2) @@ -524,17 +519,15 @@ static int cinergyt2_release (struct inode *inode, struct file *file) struct dvb_device *dvbdev = file->private_data; struct cinergyt2 *cinergyt2 = dvbdev->priv; - mutex_lock(&cinergyt2->wq_sem); + mutex_lock(&cinergyt2->sem); if (!cinergyt2->disconnect_pending && (file->f_flags & O_ACCMODE) != O_RDONLY) { - cancel_rearming_delayed_work(&cinergyt2->query_work); - - mutex_lock(&cinergyt2->sem); + cancel_delayed_work(&cinergyt2->query_work); + flush_scheduled_work(); cinergyt2_sleep(cinergyt2, 1); - mutex_unlock(&cinergyt2->sem); } - mutex_unlock(&cinergyt2->wq_sem); + mutex_unlock(&cinergyt2->sem); if (atomic_dec_and_test(&cinergyt2->inuse) && cinergyt2->disconnect_pending) { warn("delayed unregister in release"); @@ -845,13 +838,13 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) { - cancel_rearming_delayed_work(&cinergyt2->rc_query_work); + cancel_delayed_work(&cinergyt2->rc_query_work); input_unregister_device(cinergyt2->rc_input_dev); } static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) { - cancel_rearming_delayed_work(&cinergyt2->rc_query_work); + cancel_delayed_work(&cinergyt2->rc_query_work); } static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) @@ -914,7 +907,6 @@ static int cinergyt2_probe (struct usb_interface *intf, usb_set_intfdata (intf, (void *) cinergyt2); mutex_init(&cinergyt2->sem); - mutex_init(&cinergyt2->wq_sem); init_waitqueue_head (&cinergyt2->poll_wq); INIT_DELAYED_WORK(&cinergyt2->query_work, cinergyt2_query); @@ -982,8 +974,11 @@ static void cinergyt2_disconnect (struct usb_interface *intf) { struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); + flush_scheduled_work(); + cinergyt2_unregister_rc(cinergyt2); - cancel_rearming_delayed_work(&cinergyt2->query_work); + + cancel_delayed_work(&cinergyt2->query_work); wake_up_interruptible(&cinergyt2->poll_wq); cinergyt2->demux.dmx.close(&cinergyt2->demux.dmx); @@ -997,21 +992,21 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state) { struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->wq_sem)) + if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) return -ERESTARTSYS; if (1) { - cinergyt2_suspend_rc(cinergyt2); - cancel_rearming_delayed_work(&cinergyt2->query_work); + struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - mutex_lock(&cinergyt2->sem); + cinergyt2_suspend_rc(cinergyt2); + cancel_delayed_work(&cinergyt2->query_work); if (cinergyt2->streaming) cinergyt2_stop_stream_xfer(cinergyt2); + flush_scheduled_work(); cinergyt2_sleep(cinergyt2, 1); - mutex_unlock(&cinergyt2->sem); } - mutex_unlock(&cinergyt2->wq_sem); + mutex_unlock(&cinergyt2->sem); return 0; } @@ -1019,15 +1014,9 @@ static int cinergyt2_resume (struct usb_interface *intf) { struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); struct dvbt_set_parameters_msg *param = &cinergyt2->param; - int err = -ERESTARTSYS; - - if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->wq_sem)) - goto out; - - if (mutex_lock_interruptible(&cinergyt2->sem)) - goto out_unlock1; - err = 0; + if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) + return -ERESTARTSYS; if (!cinergyt2->sleeping) { cinergyt2_sleep(cinergyt2, 0); @@ -1040,10 +1029,7 @@ static int cinergyt2_resume (struct usb_interface *intf) cinergyt2_resume_rc(cinergyt2); mutex_unlock(&cinergyt2->sem); -out_unlock1: - mutex_unlock(&cinergyt2->wq_sem); -out: - return err; + return 0; } static const struct usb_device_id cinergyt2_table [] __devinitdata = { diff --git a/trunk/drivers/media/dvb/ttpci/budget-core.c b/trunk/drivers/media/dvb/ttpci/budget-core.c index b611f2b1f8bc..2557ac9620d0 100644 --- a/trunk/drivers/media/dvb/ttpci/budget-core.c +++ b/trunk/drivers/media/dvb/ttpci/budget-core.c @@ -529,7 +529,7 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, if (bi->type != BUDGET_FS_ACTIVY) saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); - if ((ret = budget_register(budget)) == 0) + if (budget_register(budget) == 0) return 0; /* Everything OK */ /* An error occurred, cleanup resources */ diff --git a/trunk/drivers/media/video/bt8xx/bttv-driver.c b/trunk/drivers/media/video/bt8xx/bttv-driver.c index b1fedb0f6431..1c38723d3169 100644 --- a/trunk/drivers/media/video/bt8xx/bttv-driver.c +++ b/trunk/drivers/media/video/bt8xx/bttv-driver.c @@ -1331,7 +1331,7 @@ set_tvnorm(struct bttv *btv, unsigned int norm) /* Call with btv->lock down. */ static void -set_input(struct bttv *btv, unsigned int input, unsigned int norm) +set_input(struct bttv *btv, unsigned int input) { unsigned long flags; @@ -1350,7 +1350,7 @@ set_input(struct bttv *btv, unsigned int input, unsigned int norm) } audio_input(btv,(input == bttv_tvcards[btv->c.type].tuner ? TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN)); - set_tvnorm(btv, norm); + set_tvnorm(btv,btv->tvnorm); i2c_vidiocschan(btv); } @@ -1441,7 +1441,7 @@ static void bttv_reinit_bt848(struct bttv *btv) init_bt848(btv); btv->pll.pll_current = -1; - set_input(btv, btv->input, btv->tvnorm); + set_input(btv,btv->input); } static int get_control(struct bttv *btv, struct v4l2_control *c) @@ -2011,7 +2011,8 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) return 0; } - set_input(btv, v->channel, v->norm); + btv->tvnorm = v->norm; + set_input(btv,v->channel); mutex_unlock(&btv->lock); return 0; } @@ -2147,7 +2148,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) if (*i > bttv_tvcards[btv->c.type].video_inputs) return -EINVAL; mutex_lock(&btv->lock); - set_input(btv, *i, btv->tvnorm); + set_input(btv,*i); mutex_unlock(&btv->lock); return 0; } @@ -4779,7 +4780,7 @@ static int __devinit bttv_probe(struct pci_dev *dev, bt848_hue(btv,32768); bt848_sat(btv,32768); audio_mute(btv, 1); - set_input(btv, 0, btv->tvnorm); + set_input(btv,0); bttv_crop_reset(&btv->crop[0], btv->tvnorm); btv->crop[1] = btv->crop[0]; /* current = default */ disclaim_vbi_lines(btv); diff --git a/trunk/drivers/media/video/cx88/cx88-blackbird.c b/trunk/drivers/media/video/cx88/cx88-blackbird.c index a80b1cb1abe8..b0466b88f52c 100644 --- a/trunk/drivers/media/video/cx88/cx88-blackbird.c +++ b/trunk/drivers/media/video/cx88/cx88-blackbird.c @@ -1034,8 +1034,6 @@ static int vidioc_g_tuner (struct file *file, void *priv, if (unlikely(UNSET == core->tuner_type)) return -EINVAL; - if (0 != t->index) - return -EINVAL; strcpy(t->name, "Television"); t->type = V4L2_TUNER_ANALOG_TV; diff --git a/trunk/drivers/misc/Kconfig b/trunk/drivers/misc/Kconfig index 616eee9c04f1..2f2fbffafbe0 100644 --- a/trunk/drivers/misc/Kconfig +++ b/trunk/drivers/misc/Kconfig @@ -187,5 +187,13 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. +config BLINK + tristate "Keyboard blink driver" + help + Driver that when loaded will blink the keyboard LEDs continuously. + This is useful for debugging and for kernels that cannot necessarily + output something to the screen like kexec kernels to give the user + a visual indication that the kernel is doing something. + endmenu diff --git a/trunk/drivers/misc/Makefile b/trunk/drivers/misc/Makefile index 8abbf2f07a65..5b6d46de005c 100644 --- a/trunk/drivers/misc/Makefile +++ b/trunk/drivers/misc/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o +obj-$(CONFIG_BLINK) += blink.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o diff --git a/trunk/drivers/misc/blink.c b/trunk/drivers/misc/blink.c new file mode 100644 index 000000000000..97f7253ce2d3 --- /dev/null +++ b/trunk/drivers/misc/blink.c @@ -0,0 +1,45 @@ +#include +#include +#include +#include + +static void do_blink(unsigned long data); + +static DEFINE_TIMER(blink_timer, do_blink, 0 ,0); + +static void do_blink(unsigned long data) +{ + static long count; + if (panic_blink) + panic_blink(count++); + blink_timer.expires = jiffies + msecs_to_jiffies(1); + add_timer(&blink_timer); +} + +static int blink_panic_event(struct notifier_block *blk, + unsigned long event, void *arg) +{ + do_blink(0); + return 0; +} + +static struct notifier_block blink_notify = { + .notifier_call = blink_panic_event, +}; + +static __init int blink_init(void) +{ + printk(KERN_INFO "Enabling keyboard blinking\n"); + atomic_notifier_chain_register(&panic_notifier_list, &blink_notify); + return 0; +} + +static __exit void blink_remove(void) +{ + del_timer_sync(&blink_timer); + atomic_notifier_chain_unregister(&panic_notifier_list, &blink_notify); +} + +module_init(blink_init); +module_exit(blink_remove); + diff --git a/trunk/drivers/net/Kconfig b/trunk/drivers/net/Kconfig index b49375abb5f4..7d57f4a25dc1 100644 --- a/trunk/drivers/net/Kconfig +++ b/trunk/drivers/net/Kconfig @@ -1187,7 +1187,7 @@ config IBMVETH config IBM_EMAC tristate "PowerPC 4xx on-chip Ethernet support" - depends on 4xx && !PPC_MERGE + depends on 4xx help This driver supports the PowerPC 4xx EMAC family of on-chip Ethernet controllers. diff --git a/trunk/drivers/net/gianfar.c b/trunk/drivers/net/gianfar.c index 1b854bf07b09..6822bf14267b 100644 --- a/trunk/drivers/net/gianfar.c +++ b/trunk/drivers/net/gianfar.c @@ -944,7 +944,7 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) flags |= TXFCB_UDP; fcb->phcs = udp_hdr(skb)->check; } else - fcb->phcs = tcp_hdr(skb)->check; + fcb->phcs = udp_hdr(skb)->check; /* l3os is the distance between the start of the * frame (skb->data) and the start of the IP hdr. diff --git a/trunk/drivers/net/mlx4/main.c b/trunk/drivers/net/mlx4/main.c index c3da2a2f5431..41eafebf5823 100644 --- a/trunk/drivers/net/mlx4/main.c +++ b/trunk/drivers/net/mlx4/main.c @@ -911,8 +911,6 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6340) }, /* MT25408 "Hermon" SDR */ { PCI_VDEVICE(MELLANOX, 0x634a) }, /* MT25408 "Hermon" DDR */ { PCI_VDEVICE(MELLANOX, 0x6354) }, /* MT25408 "Hermon" QDR */ - { PCI_VDEVICE(MELLANOX, 0x6732) }, /* MT25408 "Hermon" DDR PCIe gen2 */ - { PCI_VDEVICE(MELLANOX, 0x673c) }, /* MT25408 "Hermon" QDR PCIe gen2 */ { 0, } }; diff --git a/trunk/drivers/net/myri10ge/myri10ge.c b/trunk/drivers/net/myri10ge/myri10ge.c index d0cc122fa3f0..0f9904fe3a5a 100644 --- a/trunk/drivers/net/myri10ge/myri10ge.c +++ b/trunk/drivers/net/myri10ge/myri10ge.c @@ -2854,8 +2854,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENOMEM; } - SET_NETDEV_DEV(netdev, &pdev->dev); - mgp = netdev_priv(netdev); memset(mgp, 0, sizeof(*mgp)); mgp->dev = netdev; diff --git a/trunk/drivers/net/netxen/netxen_nic.h b/trunk/drivers/net/netxen/netxen_nic.h index 619503742b7d..91f25e0a638e 100644 --- a/trunk/drivers/net/netxen/netxen_nic.h +++ b/trunk/drivers/net/netxen/netxen_nic.h @@ -937,7 +937,6 @@ struct netxen_adapter { struct netxen_ring_ctx *ctx_desc; struct pci_dev *ctx_desc_pdev; dma_addr_t ctx_desc_phys_addr; - int intr_scheme; int (*enable_phy_interrupts) (struct netxen_adapter *); int (*disable_phy_interrupts) (struct netxen_adapter *); void (*handle_phy_intr) (struct netxen_adapter *); @@ -952,24 +951,6 @@ struct netxen_adapter { int (*stop_port) (struct netxen_adapter *); }; /* netxen_adapter structure */ -/* - * NetXen dma watchdog control structure - * - * Bit 0 : enabled => R/O: 1 watchdog active, 0 inactive - * Bit 1 : disable_request => 1 req disable dma watchdog - * Bit 2 : enable_request => 1 req enable dma watchdog - * Bit 3-31 : unused - */ - -#define netxen_set_dma_watchdog_disable_req(config_word) \ - _netxen_set_bits(config_word, 1, 1, 1) -#define netxen_set_dma_watchdog_enable_req(config_word) \ - _netxen_set_bits(config_word, 2, 1, 1) -#define netxen_get_dma_watchdog_enabled(config_word) \ - ((config_word) & 0x1) -#define netxen_get_dma_watchdog_disabled(config_word) \ - (((config_word) >> 1) & 0x1) - /* Max number of xmit producer threads that can run simultaneously */ #define MAX_XMIT_PRODUCERS 16 @@ -1049,8 +1030,8 @@ int netxen_nic_erase_pxe(struct netxen_adapter *adapter); /* Functions from netxen_nic_init.c */ void netxen_free_adapter_offload(struct netxen_adapter *adapter); int netxen_initialize_adapter_offload(struct netxen_adapter *adapter); -int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val); -int netxen_load_firmware(struct netxen_adapter *adapter); +void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val); +void netxen_load_firmware(struct netxen_adapter *adapter); int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose); int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp); int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr, @@ -1099,106 +1080,37 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev); static inline void netxen_nic_disable_int(struct netxen_adapter *adapter) { - uint32_t mask = 0x7ff; - int retries = 32; - - DPRINTK(1, INFO, "Entered ISR Disable \n"); - - switch (adapter->portnum) { - case 0: - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0)); - break; - case 1: - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1)); - break; - case 2: - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2)); - break; - case 3: - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3)); - break; - } - - if (adapter->intr_scheme != -1 && - adapter->intr_scheme != INTR_SCHEME_PERPORT) { - writel(mask, - (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK))); - } - - /* Window = 0 or 1 */ - if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) { - do { - writel(0xffffffff, (void *) - (PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS))); - mask = readl((void *) - (pci_base_offset(adapter, ISR_INT_VECTOR))); - if (!(mask & 0x80)) - break; - udelay(10); - } while (--retries); - - if (!retries) { - printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n", - netxen_nic_driver_name); - } - } - - DPRINTK(1, INFO, "Done with Disable Int\n"); + /* + * ISR_INT_MASK: Can be read from window 0 or 1. + */ + writel(0x7ff, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)); - return; } static inline void netxen_nic_enable_int(struct netxen_adapter *adapter) { u32 mask; - DPRINTK(1, INFO, "Entered ISR Enable \n"); - - if (adapter->intr_scheme != -1 && - adapter->intr_scheme != INTR_SCHEME_PERPORT) { - switch (adapter->ahw.board_type) { - case NETXEN_NIC_GBE: - mask = 0x77b; - break; - case NETXEN_NIC_XGBE: - mask = 0x77f; - break; - default: - mask = 0x7ff; - break; - } - - writel(mask, - (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK))); - } - switch (adapter->portnum) { - case 0: - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0)); - break; - case 1: - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1)); + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + mask = 0x77b; break; - case 2: - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2)); + case NETXEN_NIC_XGBE: + mask = 0x77f; break; - case 3: - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3)); + default: + mask = 0x7ff; break; } + writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)); + if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) { mask = 0xbff; - if (adapter->intr_scheme != -1 && - adapter->intr_scheme != INTR_SCHEME_PERPORT) { - writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR)); - } - writel(mask, - (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK))); + writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR)); + writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, + ISR_INT_TARGET_MASK)); } - - DPRINTK(1, INFO, "Done with enable Int\n"); - - return; } /* @@ -1252,62 +1164,6 @@ static inline void get_brd_name_by_type(u32 type, char *name) name = "Unknown"; } -static inline int -dma_watchdog_shutdown_request(struct netxen_adapter *adapter) -{ - u32 ctrl; - - /* check if already inactive */ - if (netxen_nic_hw_read_wx(adapter, - NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4)) - printk(KERN_ERR "failed to read dma watchdog status\n"); - - if (netxen_get_dma_watchdog_enabled(ctrl) == 0) - return 1; - - /* Send the disable request */ - netxen_set_dma_watchdog_disable_req(ctrl); - netxen_crb_writelit_adapter(adapter, - NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl); - - return 0; -} - -static inline int -dma_watchdog_shutdown_poll_result(struct netxen_adapter *adapter) -{ - u32 ctrl; - - if (netxen_nic_hw_read_wx(adapter, - NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4)) - printk(KERN_ERR "failed to read dma watchdog status\n"); - - return ((netxen_get_dma_watchdog_enabled(ctrl) == 0) && - (netxen_get_dma_watchdog_disabled(ctrl) == 0)); -} - -static inline int -dma_watchdog_wakeup(struct netxen_adapter *adapter) -{ - u32 ctrl; - - if (netxen_nic_hw_read_wx(adapter, - NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4)) - printk(KERN_ERR "failed to read dma watchdog status\n"); - - if (netxen_get_dma_watchdog_enabled(ctrl)) - return 1; - - /* send the wakeup request */ - netxen_set_dma_watchdog_enable_req(ctrl); - - netxen_crb_writelit_adapter(adapter, - NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl); - - return 0; -} - - int netxen_is_flash_supported(struct netxen_adapter *adapter); int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, u64 mac[]); extern void netxen_change_ringparam(struct netxen_adapter *adapter); diff --git a/trunk/drivers/net/netxen/netxen_nic_hdr.h b/trunk/drivers/net/netxen/netxen_nic_hdr.h index 3276866b17e2..608e37b349b4 100644 --- a/trunk/drivers/net/netxen/netxen_nic_hdr.h +++ b/trunk/drivers/net/netxen/netxen_nic_hdr.h @@ -687,6 +687,4 @@ enum { #define PCIE_MAX_MASTER_SPLIT (0x14048) -#define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14) - #endif /* __NETXEN_NIC_HDR_H_ */ diff --git a/trunk/drivers/net/netxen/netxen_nic_hw.c b/trunk/drivers/net/netxen/netxen_nic_hw.c index aac15421bd1e..c012764d1145 100644 --- a/trunk/drivers/net/netxen/netxen_nic_hw.c +++ b/trunk/drivers/net/netxen/netxen_nic_hw.c @@ -377,7 +377,7 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) recv_crb_registers[ctx]. crb_rcvpeg_state)); while (state != PHAN_PEG_RCV_INITIALIZED && loops < 20) { - msleep(1); + udelay(100); /* Window 1 call */ state = readl(NETXEN_CRB_NORMALIZE(adapter, recv_crb_registers @@ -392,11 +392,7 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) return err; } } - adapter->intr_scheme = readl( - NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW)); - printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name, - adapter->intr_scheme); - DPRINTK(INFO, "Receive Peg ready too. starting stuff\n"); + DPRINTK(INFO, "Recieve Peg ready too. starting stuff\n"); addr = netxen_alloc(adapter->ahw.pdev, sizeof(struct netxen_ring_ctx) + @@ -701,7 +697,7 @@ void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw) adapter->curr_window = 0; } -int netxen_load_firmware(struct netxen_adapter *adapter) +void netxen_load_firmware(struct netxen_adapter *adapter) { int i; u32 data, size = 0; @@ -713,24 +709,15 @@ int netxen_load_firmware(struct netxen_adapter *adapter) writel(1, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST)); for (i = 0; i < size; i++) { - int retries = 10; - if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0) - return -EIO; - + if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0) { + DPRINTK(ERR, + "Error in netxen_rom_fast_read(). Will skip" + "loading flash image\n"); + return; + } off = netxen_nic_pci_set_window(adapter, memaddr); addr = pci_base_offset(adapter, off); writel(data, addr); - do { - if (readl(addr) == data) - break; - msleep(100); - writel(data, addr); - } while (--retries); - if (!retries) { - printk(KERN_ERR "%s: firmware load aborted, write failed at 0x%x\n", - netxen_nic_driver_name, memaddr); - return -EIO; - } flashaddr += 4; memaddr += 4; } @@ -740,7 +727,7 @@ int netxen_load_firmware(struct netxen_adapter *adapter) NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL)); writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST)); - return 0; + udelay(100); } int diff --git a/trunk/drivers/net/netxen/netxen_nic_init.c b/trunk/drivers/net/netxen/netxen_nic_init.c index 1811bcb8c380..bb23f4c360db 100644 --- a/trunk/drivers/net/netxen/netxen_nic_init.c +++ b/trunk/drivers/net/netxen/netxen_nic_init.c @@ -139,8 +139,6 @@ int netxen_init_firmware(struct netxen_adapter *adapter) return err; } /* Window 1 call */ - writel(INTR_SCHEME_PERPORT, - NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_HOST)); writel(MPORT_MULTI_FUNCTION_MODE, NETXEN_CRB_NORMALIZE(adapter, CRB_MPORT_MODE)); writel(PHAN_INITIALIZE_ACK, @@ -407,7 +405,10 @@ static inline int do_rom_fast_write(struct netxen_adapter *adapter, int addr, static inline int do_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp) { - cond_resched(); + if (jiffies > (last_schedule_time + (8 * HZ))) { + last_schedule_time = jiffies; + schedule(); + } netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); @@ -853,10 +854,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) netxen_nic_pci_change_crbwindow(adapter, 1); } if (init_delay == 1) { - msleep(2000); + ssleep(1); init_delay = 0; } - msleep(20); + msleep(1); } kfree(buf); @@ -932,6 +933,10 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter) void netxen_free_adapter_offload(struct netxen_adapter *adapter) { if (adapter->dummy_dma.addr) { + writel(0, NETXEN_CRB_NORMALIZE(adapter, + CRB_HOST_DUMMY_BUF_ADDR_HI)); + writel(0, NETXEN_CRB_NORMALIZE(adapter, + CRB_HOST_DUMMY_BUF_ADDR_LO)); pci_free_consistent(adapter->ahw.pdev, NETXEN_HOST_DUMMY_DMA_SIZE, adapter->dummy_dma.addr, @@ -940,32 +945,25 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter) } } -int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val) +void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val) { u32 val = 0; - int retries = 30; + int loops = 0; if (!pegtune_val) { - do { - val = readl(NETXEN_CRB_NORMALIZE + val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + while (val != PHAN_INITIALIZE_COMPLETE && + val != PHAN_INITIALIZE_ACK && loops < 200000) { + udelay(100); + schedule(); + val = + readl(NETXEN_CRB_NORMALIZE (adapter, CRB_CMDPEG_STATE)); - pegtune_val = readl(NETXEN_CRB_NORMALIZE - (adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE)); - - if (val == PHAN_INITIALIZE_COMPLETE || - val == PHAN_INITIALIZE_ACK) - return 0; - - msleep(1000); - } while (--retries); - if (!retries) { - printk(KERN_WARNING "netxen_phantom_init: init failed, " - "pegtune_val=%x\n", pegtune_val); - return -1; + loops++; } + if (val != PHAN_INITIALIZE_COMPLETE) + printk("WARNING: Initial boot wait loop failed...\n"); } - - return 0; } int netxen_nic_rx_has_work(struct netxen_adapter *adapter) @@ -1122,7 +1120,6 @@ netxen_process_rcv(struct netxen_adapter *adapter, int ctxid, adapter->stats.csummed++; skb->ip_summed = CHECKSUM_UNNECESSARY; } - skb->dev = netdev; if (desc_ctx == RCV_DESC_LRO_CTXID) { /* True length was only available on the last pkt */ skb_put(skb, buffer->lro_length); @@ -1227,7 +1224,6 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max) NETXEN_CRB_NORMALIZE(adapter, recv_crb_registers[adapter->portnum]. crb_rcv_status_consumer)); - wmb(); } return count; @@ -1280,13 +1276,11 @@ int netxen_process_cmd_ring(unsigned long data) if (skb && (cmpxchg(&buffer->skb, skb, 0) == skb)) { pci_unmap_single(pdev, frag->dma, frag->length, PCI_DMA_TODEVICE); - frag->dma = 0ULL; for (i = 1; i < buffer->frag_count; i++) { DPRINTK(INFO, "getting fragment no %d\n", i); frag++; /* Get the next frag */ pci_unmap_page(pdev, frag->dma, frag->length, PCI_DMA_TODEVICE); - frag->dma = 0ULL; } adapter->stats.skbfreed++; @@ -1452,7 +1446,6 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid) writel(msg, DB_NORMALIZE(adapter, NETXEN_RCV_PRODUCER_OFFSET)); - wmb(); } } } diff --git a/trunk/drivers/net/netxen/netxen_nic_main.c b/trunk/drivers/net/netxen/netxen_nic_main.c index a66ff58366cf..6167b58d2731 100644 --- a/trunk/drivers/net/netxen/netxen_nic_main.c +++ b/trunk/drivers/net/netxen/netxen_nic_main.c @@ -308,13 +308,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->netdev = netdev; adapter->pdev = pdev; - - /* this will be read from FW later */ - adapter->intr_scheme = -1; - - /* This will be reset for mezz cards */ adapter->portnum = pci_func_id; - adapter->status &= ~NETXEN_NETDEV_STATUS; netdev->open = netxen_nic_open; netdev->stop = netxen_nic_close; @@ -342,9 +336,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; - if (pci_enable_msi(pdev)) + if (pci_enable_msi(pdev)) { adapter->flags &= ~NETXEN_NIC_MSI_ENABLED; - else + printk(KERN_WARNING "%s: unable to allocate MSI interrupt" + " error\n", netxen_nic_driver_name); + } else adapter->flags |= NETXEN_NIC_MSI_ENABLED; netdev->irq = pdev->irq; @@ -359,6 +355,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* initialize the adapter */ netxen_initialize_adapter_hw(adapter); +#ifdef CONFIG_PPC + if ((adapter->ahw.boardcfg.board_type == + NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) && + (pci_func_id == 2)) + goto err_out_free_adapter; +#endif /* CONFIG_PPC */ + /* * Adapter in our case is quad port so initialize it before * initializing the ports @@ -506,30 +509,22 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) NETXEN_CAM_RAM(0x1fc))); if (val == 0x55555555) { /* This is the first boot after power up */ - netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(0x4), &val); - if (!(val & 0x4)) { - val |= 0x4; - netxen_nic_write_w0(adapter, NETXEN_PCIE_REG(0x4), val); - netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(0x4), &val); - if (!(val & 0x4)) - printk(KERN_ERR "%s: failed to set MSI bit in PCI-e reg\n", - netxen_nic_driver_name); - } val = readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_SW_RESET)); printk(KERN_INFO"NetXen: read 0x%08x for reset reg.\n",val); if (val != 0x80000f) { /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, - NETXEN_CAM_RAM(0x1fc))); - printk(KERN_ERR "ERROR in NetXen HW init sequence.\n"); - err = -ENODEV; - goto err_out_free_dev; + writel(0, NETXEN_CRB_NORMALIZE(adapter, + NETXEN_CAM_RAM(0x1fc))); + printk(KERN_ERR "ERROR in NetXen HW init sequence.\n"); + err = -ENODEV; + goto err_out_free_dev; } - } - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); + /* clear the register for future unloads/loads */ + writel(0, NETXEN_CRB_NORMALIZE(adapter, + NETXEN_CAM_RAM(0x1fc))); + } printk(KERN_INFO "State: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); @@ -547,6 +542,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) NETXEN_ROMUSB_GLB_PEGTUNE_DONE)); /* Handshake with the card before we register the devices. */ netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); + + /* leave the hw in the same state as reboot */ + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + netxen_pinit_from_rom(adapter, 0); + udelay(500); + netxen_load_firmware(adapter); + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); } /* @@ -637,8 +639,8 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) struct netxen_rx_buffer *buffer; struct netxen_recv_context *recv_ctx; struct netxen_rcv_desc_ctx *rcv_desc; - int i, ctxid, ring; - static int init_firmware_done = 0; + int i; + int ctxid, ring; adapter = pci_get_drvdata(pdev); if (adapter == NULL) @@ -646,21 +648,31 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) netdev = adapter->netdev; - unregister_netdev(netdev); - + netxen_nic_disable_int(adapter); + if (adapter->irq) + free_irq(adapter->irq, adapter); + if (adapter->stop_port) adapter->stop_port(adapter); - netxen_nic_disable_int(adapter); + if ((adapter->flags & NETXEN_NIC_MSI_ENABLED)) + pci_disable_msi(pdev); - if (adapter->irq) - free_irq(adapter->irq, adapter); + if (adapter->portnum == 0) + netxen_free_adapter_offload(adapter); - if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) { - init_firmware_done++; - netxen_free_hw_resources(adapter); + if(adapter->portnum == 0) { + /* leave the hw in the same state as reboot */ + writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); + netxen_pinit_from_rom(adapter, 0); + udelay(500); + netxen_load_firmware(adapter); + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); } + if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) + netxen_free_hw_resources(adapter); + for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) { recv_ctx = &adapter->recv_ctx[ctxid]; for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { @@ -679,73 +691,17 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) } } - if (adapter->flags & NETXEN_NIC_MSI_ENABLED) - pci_disable_msi(pdev); + unregister_netdev(netdev); vfree(adapter->cmd_buf_arr); - pci_disable_device(pdev); - - if (adapter->portnum == 0) { - if (init_firmware_done) { - dma_watchdog_shutdown_request(adapter); - msleep(100); - i = 100; - while ((dma_watchdog_shutdown_poll_result(adapter) != 1) && i) { - printk(KERN_INFO "dma_watchdog_shutdown_poll still in progress\n"); - msleep(100); - i--; - } - - if (i == 0) { - printk(KERN_ERR "dma_watchdog_shutdown_request failed\n"); - return; - } - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - - /* leave the hw in the same state as reboot */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); - if (netxen_pinit_from_rom(adapter, 0)) - return; - msleep(1); - if (netxen_load_firmware(adapter)) - return; - netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); - } - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - - dma_watchdog_shutdown_request(adapter); - msleep(100); - i = 100; - while ((dma_watchdog_shutdown_poll_result(adapter) != 1) && i) { - printk(KERN_INFO "dma_watchdog_shutdown_poll still in progress\n"); - msleep(100); - i--; - } - - if (i) { - netxen_free_adapter_offload(adapter); - } else { - printk(KERN_ERR "failed to dma shutdown\n"); - return; - } - - } - iounmap(adapter->ahw.db_base); iounmap(adapter->ahw.pci_base0); iounmap(adapter->ahw.pci_base1); iounmap(adapter->ahw.pci_base2); pci_release_regions(pdev); + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); free_netdev(netdev); @@ -842,7 +798,7 @@ static int netxen_nic_close(struct net_device *netdev) if (buffrag->dma) { pci_unmap_single(adapter->pdev, buffrag->dma, buffrag->length, PCI_DMA_TODEVICE); - buffrag->dma = 0ULL; + buffrag->dma = (u64) NULL; } for (j = 0; j < cmd_buff->frag_count; j++) { buffrag++; @@ -850,7 +806,7 @@ static int netxen_nic_close(struct net_device *netdev) pci_unmap_page(adapter->pdev, buffrag->dma, buffrag->length, PCI_DMA_TODEVICE); - buffrag->dma = 0ULL; + buffrag->dma = (u64) NULL; } } /* Free the skb we received in netxen_nic_xmit_frame */ @@ -860,10 +816,8 @@ static int netxen_nic_close(struct net_device *netdev) } cmd_buff++; } - if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) { - FLUSH_SCHEDULED_WORK(); - del_timer_sync(&adapter->watchdog_timer); - } + FLUSH_SCHEDULED_WORK(); + del_timer_sync(&adapter->watchdog_timer); return 0; } @@ -1149,26 +1103,28 @@ static int netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev) { u32 ret = 0; - u32 our_int = 0; DPRINTK(INFO, "Entered handle ISR\n"); adapter->stats.ints++; if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) { + int count = 0; + u32 mask; + u32 our_int = 0; our_int = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR)); /* not our interrupt */ if ((our_int & (0x80 << adapter->portnum)) == 0) return ret; - } + netxen_nic_disable_int(adapter); + /* Window = 0 or 1 */ + do { + writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter, + ISR_INT_TARGET_STATUS)); + mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR)); + } while (((mask & 0x80) != 0) && (++count < 32)); + if ((mask & 0x80) != 0) + printk("Could not disable interrupt completely\n"); - netxen_nic_disable_int(adapter); - - if (adapter->intr_scheme == INTR_SCHEME_PERPORT) { - /* claim interrupt */ - if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) { - writel(our_int & ~((u32)(0x80 << adapter->portnum)), - NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR)); - } } if (netxen_nic_rx_has_work(adapter) || netxen_nic_tx_has_work(adapter)) { @@ -1180,7 +1136,7 @@ netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev) } else { static unsigned int intcount = 0; if ((++intcount & 0xfff) == 0xfff) - DPRINTK(KERN_ERR + printk(KERN_ERR "%s: %s interrupt %d while in poll\n", netxen_nic_driver_name, netdev->name, intcount); @@ -1302,7 +1258,6 @@ static void __exit netxen_exit_module(void) /* * Wait for some time to allow the dma to drain, if any. */ - msleep(100); pci_unregister_driver(&netxen_driver); destroy_workqueue(netxen_workq); } diff --git a/trunk/drivers/net/netxen/netxen_nic_phan_reg.h b/trunk/drivers/net/netxen/netxen_nic_phan_reg.h index 10fe6fafa6f6..9457fc7249c8 100644 --- a/trunk/drivers/net/netxen/netxen_nic_phan_reg.h +++ b/trunk/drivers/net/netxen/netxen_nic_phan_reg.h @@ -114,20 +114,6 @@ #define CRB_V2P_3 NETXEN_NIC_REG(0x29c) #define CRB_V2P(port) (CRB_V2P_0+((port)*4)) #define CRB_DRIVER_VERSION NETXEN_NIC_REG(0x2a0) -/* sw int status/mask registers */ -#define CRB_SW_INT_MASK_0 NETXEN_NIC_REG(0x1d8) -#define CRB_SW_INT_MASK_1 NETXEN_NIC_REG(0x1e0) -#define CRB_SW_INT_MASK_2 NETXEN_NIC_REG(0x1e4) -#define CRB_SW_INT_MASK_3 NETXEN_NIC_REG(0x1e8) - -/* - * capabilities register, can be used to selectively enable/disable features - * for backward compability - */ -#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8) -#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc) - -#define INTR_SCHEME_PERPORT 0x1 /* used for ethtool tests */ #define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280) diff --git a/trunk/drivers/net/ns83820.c b/trunk/drivers/net/ns83820.c index 104aab3c957f..717d8e9b9833 100644 --- a/trunk/drivers/net/ns83820.c +++ b/trunk/drivers/net/ns83820.c @@ -1831,13 +1831,11 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ ndev = alloc_etherdev(sizeof(struct ns83820)); dev = PRIV(ndev); - + dev->ndev = ndev; err = -ENOMEM; if (!dev) goto out; - dev->ndev = ndev; - spin_lock_init(&dev->rx_info.lock); spin_lock_init(&dev->tx_lock); spin_lock_init(&dev->misc_lock); diff --git a/trunk/drivers/net/pcmcia/3c589_cs.c b/trunk/drivers/net/pcmcia/3c589_cs.c index 503f2685fb73..143ae2ff309e 100644 --- a/trunk/drivers/net/pcmcia/3c589_cs.c +++ b/trunk/drivers/net/pcmcia/3c589_cs.c @@ -629,9 +629,9 @@ static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev) outw(SetTxThreshold + 1536, ioaddr + EL3_CMD); } + dev_kfree_skb(skb); pop_tx_status(dev); spin_unlock_irqrestore(&priv->lock, flags); - dev_kfree_skb(skb); return 0; } diff --git a/trunk/drivers/net/starfire.c b/trunk/drivers/net/starfire.c index 786d4b9c07ec..9d6e454a8f98 100644 --- a/trunk/drivers/net/starfire.c +++ b/trunk/drivers/net/starfire.c @@ -152,7 +152,7 @@ static int full_duplex[MAX_UNITS] = {0, }; * This SUCKS. * We need a much better method to determine if dma_addr_t is 64-bit. */ -#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) +#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) /* 64-bit dma_addr_t */ #define ADDR_64BITS /* This chip uses 64 bit addresses. */ #define netdrv_addr_t u64 diff --git a/trunk/drivers/net/usb/cdc_ether.c b/trunk/drivers/net/usb/cdc_ether.c index a42acc3cc609..675ac99a79c6 100644 --- a/trunk/drivers/net/usb/cdc_ether.c +++ b/trunk/drivers/net/usb/cdc_ether.c @@ -144,14 +144,14 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) * modem interface from an RNDIS non-modem. */ if (rndis) { - struct usb_cdc_acm_descriptor *acm; + struct usb_cdc_acm_descriptor *d; - acm = (void *) buf; - if (acm->bmCapabilities) { + d = (void *) buf; + if (d->bmCapabilities) { dev_dbg(&intf->dev, "ACM capabilities %02x, " "not really RNDIS?\n", - acm->bmCapabilities); + d->bmCapabilities); goto bad_desc; } } diff --git a/trunk/drivers/net/usb/dm9601.c b/trunk/drivers/net/usb/dm9601.c index 16c7a0e87850..a67638601477 100644 --- a/trunk/drivers/net/usb/dm9601.c +++ b/trunk/drivers/net/usb/dm9601.c @@ -414,16 +414,18 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.reg_num_mask = 0x1f; /* reset */ - dm_write_reg(dev, DM_NET_CTRL, 1); + ret = dm_write_reg(dev, DM_NET_CTRL, 1); udelay(20); /* read MAC */ - if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr) < 0) { + ret = dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr); + if (ret < 0) { printk(KERN_ERR "Error reading MAC address\n"); ret = -ENODEV; goto out; } + /* power up phy */ dm_write_reg(dev, DM_GPR_CTRL, 1); dm_write_reg(dev, DM_GPR_DATA, 0); @@ -487,8 +489,6 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb, b3..n: packet data */ - len = skb->len; - if (skb_headroom(skb) < DM_TX_OVERHEAD) { struct sk_buff *skb2; @@ -501,9 +501,10 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb, __skb_push(skb, DM_TX_OVERHEAD); + len = skb->len; /* usbnet adds padding if length is a multiple of packet size if so, adjust length value in header */ - if ((skb->len % dev->maxpacket) == 0) + if ((len % dev->maxpacket) == 0) len++; skb->data[0] = len; diff --git a/trunk/drivers/net/usb/usbnet.c b/trunk/drivers/net/usb/usbnet.c index a12f576391cf..5b16d9a1269a 100644 --- a/trunk/drivers/net/usb/usbnet.c +++ b/trunk/drivers/net/usb/usbnet.c @@ -953,14 +953,11 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) /* don't assume the hardware handles USB_ZERO_PACKET * NOTE: strictly conforming cdc-ether devices should expect * the ZLP here, but ignore the one-byte packet. + * + * FIXME zero that byte, if it doesn't require a new skb. */ - if ((length % dev->maxpacket) == 0) { + if ((length % dev->maxpacket) == 0) urb->transfer_buffer_length++; - if (skb_tailroom(skb)) { - skb->data[skb->len] = 0; - __skb_put(skb, 1); - } - } spin_lock_irqsave (&dev->txq.lock, flags); diff --git a/trunk/drivers/net/wireless/libertas/Makefile b/trunk/drivers/net/wireless/libertas/Makefile index 32ed4136b0d4..a1097f59fd46 100644 --- a/trunk/drivers/net/wireless/libertas/Makefile +++ b/trunk/drivers/net/wireless/libertas/Makefile @@ -2,7 +2,7 @@ libertas-objs := main.o fw.o wext.o \ rx.o tx.o cmd.o \ cmdresp.o scan.o \ join.o 11d.o \ - debugfs.o \ + ioctl.o debugfs.o \ ethtool.o assoc.o usb8xxx-objs += if_bootcmd.o diff --git a/trunk/drivers/net/wireless/libertas/README b/trunk/drivers/net/wireless/libertas/README index 0b133ce63805..1f92f50b643c 100644 --- a/trunk/drivers/net/wireless/libertas/README +++ b/trunk/drivers/net/wireless/libertas/README @@ -28,6 +28,281 @@ DRIVER LOADING insmod usb8388.ko [fw_name=usb8388.bin] +===================== +IWPRIV COMMAND +===================== + +NAME + This manual describes the usage of private commands used in Marvell WLAN + Linux Driver. All the commands available in Wlanconfig will not be available + in the iwpriv. + +SYNOPSIS + iwpriv [sub-command] ... + + iwpriv ethX setregioncode + iwpriv ethX getregioncode + +Version 5 Command: + iwpriv ethX ledgpio + +BT Commands: + The blinding table (BT) contains a list of mac addresses that will be, + by default, ignored by the firmware. It is also possible to invert this + behavior so that we will ignore all traffic except for the portion + coming from mac addresess in the list. It is primarily used for + debugging and testing networks. It can be edited and inspected with + the following commands: + + iwpriv ethX bt_reset + iwpriv ethX bt_add + iwpriv ethX bt_del + iwpriv ethX bt_list + iwpriv ethX bt_get_invert + iwpriv ethX bt_set_invert + +FWT Commands: + The forwarding table (FWT) is a feature used to manage mesh network + routing in the firmware. The FWT is essentially a routing table that + associates a destination mac address (da) with a next hop receiver + address (ra). The FWT can be inspected and edited with the following + iwpriv commands, which are described in greater detail below. + Eventually, the table will be automatically maintained by a custom + routing protocol. + + NOTE: FWT commands replace the previous DFT commands. What were the DFT + commands?, you might ask. They were an earlier API to the firmware that + implemented a simple MAC-layer forwarding mechanism. In the unlikely + event that you were using these commands, you must migrate to the new + FWT commands which can be used to achieve the same functionality. + + iwpriv ethX fwt_add [parameters] + iwpriv ethX fwt_del [parameters] + iwpriv ethX fwt_lookup [parameters] + iwpriv ethX fwt_list [parameters] + iwpriv ethX fwt_list_route [parameters] + iwpriv ethX fwt_list_neigh [parameters] + iwpriv ethX fwt_reset [parameters] + iwpriv ethX fwt_cleanup + iwpriv ethX fwt_time + +MESH Commands: + + The MESH commands are used to configure various features of the mesh + routing protocol. The following commands are supported: + + iwpriv ethX mesh_get_ttl + iwpriv ethX mesh_set_ttl ttl + +DESCRIPTION + Those commands are used to send additional commands to the Marvell WLAN + card via the Linux device driver. + + The ethX parameter specifies the network device that is to be used to + perform this command on. it could be eth0, eth1 etc. + +setregioncode + This command is used to set the region code in the station. + where value is 'region code' for various regions like + USA FCC, Canada IC, Spain, France, Europe ETSI, Japan ... + + Usage: + iwpriv ethX setregioncode 0x10: set region code to USA (0x10). + +getregioncode + This command is used to get the region code information set in the + station. + +ledgpio + This command is used to set/get LEDs. + + iwpriv ethX ledgpio + will set the corresponding LED for the GPIO Line. + + iwpriv ethX ledgpio + will give u which LEDs are Enabled. + + Usage: + iwpriv eth1 ledgpio 1 0 2 1 3 4 + will enable + LED 1 -> GPIO 0 + LED 2 -> GPIO 1 + LED 3 -> GPIO 4 + + iwpriv eth1 ledgpio + shows LED information in the format as mentioned above. + + Note: LED0 is invalid + Note: Maximum Number of LEDs are 16. + +fwt_add + This command is used to insert an entry into the FWT table. The list of + parameters must follow the following structure: + + iwpriv ethX fwt_add da ra [metric dir rate ssn dsn hopcount ttl expiration sleepmode snr] + + The parameters between brackets are optional, but they must appear in + the order specified. For example, if you want to specify the metric, + you must also specify the dir, ssn, and dsn but you need not specify the + hopcount, expiration, sleepmode, or snr. Any unspecified parameters + will be assigned the defaults specified below. + + The different parameters are:- + da -- DA MAC address in the form 00:11:22:33:44:55 + ra -- RA MAC address in the form 00:11:22:33:44:55 + metric -- route metric (cost: smaller-metric routes are + preferred, default is 0) + dir -- direction (1 for direct, 0 for reverse, + default is 1) + rate -- data rate used for transmission to the RA, + as specified for the rateadapt command, + default is 3 (11Mbps) + ssn -- Source Sequence Number (time at the RA for + reverse routes. Default is 0) + dsn -- Destination Sequence Number (time at the DA + for direct routes. Default is 0) + hopcount -- hop count (currently unused, default is 0) + ttl -- TTL (Only used in reverse entries) + expiration -- entry expiration (in ticks, where a tick is + 1024us, or ~ 1ms. Use 0 for an indefinite + entry, default is 0) + sleepmode -- RA's sleep mode (currently unused, default is + 0) + snr -- SNR in the link to RA (currently unused, + default is 0) + + The command does not return anything. + +fwt_del + This command is used to remove an entry to the FWT table. The list of + parameters must follow the following structure: + + iwpriv ethX fwt_del da ra [dir] + + where the different parameters are:- + da -- DA MAC address (in the form "00:11:22:33:44:55") + ra -- RA MAC address (in the form "00:11:22:33:44:55") + dir -- direction (1 for direct, 0 for reverse, + default is 1) + + The command does not return anything. + +fwt_lookup + This command is used to get the best route in the FWT table to a given + host. The only parameter is the MAC address of the host that is being + looked for. + + iwpriv ethX fwt_lookup da + + where:- + da -- DA MAC address (in the form "00:11:22:33:44:55") + + The command returns an output string identical to the one returned by + fwt_list described below. + + +fwt_list + This command is used to list a route from the FWT table. The only + parameter is the index into the table. If you want to list all the + routes in a table, start with index=0, and keep listing until you get a + "(null)" string. Note that the indicies may change as the fwt is + updated. It is expected that most users will not use fwt_list directly, + but that a utility similar to the traditional route command will be used + to invoke fwt_list over and over. + + iwpriv ethX fwt_list index + + The output is a string of the following form: + + da ra valid metric dir rate ssn dsn hopcount ttl expiration + sleepmode snr precursor + + where the different fields are:- + da -- DA MAC address (in the form "00:11:22:33:44:55") + ra -- RA MAC address (in the form "00:11:22:33:44:55") + valid -- whether the route is valid (0 if not valid) + metric -- route metric (cost: smaller-metric routes are preferred) + dir -- direction (1 for direct, 0 for reverse) + rate -- data rate used for transmission to the RA, + as specified for the rateadapt command + ssn -- Source Sequence Number (time at the RA for reverse routes) + dsn -- Destination Sequence Number (time at the DA for direct routes) + hopcount -- hop count (currently unused) + ttl -- TTL (only used in reverse entries) + expiration -- entry expiration (in ticks, where a tick is 1024us, or ~ 1ms. Use 0 for an indefinite entry) + sleepmode -- RA's sleep mode (currently unused) + snr -- SNR in the link to RA (currently unused) + precursor -- predecessor in direct routes + +fwt_list_route + This command is equivalent to fwt_list. + +fwt_list_neigh + This command is used to list a neighbor from the FWT table. The only + parameter is the neighbor ID. If you want to list all the neighbors in a + table, start with nid=0, and keep incrementing nid until you get a + "(null)" string. Note that the nid from a fwt_list_route command can be + used as an input to this command. Also note that this command is meant + mostly for debugging. It is expected that users will use fwt_lookup. + One important reason for this is that the neighbor id may change as the + neighbor table is altered. + + iwpriv ethX fwt_list_neigh nid + + The output is a string of the following form: + + ra sleepmode snr references + + where the different fields are:- + ra -- RA MAC address (in the form "00:11:22:33:44:55") + sleepmode -- RA's sleep mode (currently unused) + snr -- SNR in the link to RA (currently unused) + references -- RA's reference counter + +fwt_reset + This command is used to reset the FWT table, getting rid of all the + entries. There are no input parameters. + + iwpriv ethX fwt_reset + + The command does not return anything. + +fwt_cleanup + This command is used to perform user-based garbage recollection. The + FWT table is checked, and all the entries that are expired or invalid + are cleaned. Note that this is exported to the driver for debugging + purposes, as garbage collection is also fired by the firmware when in + space problems. There are no input parameters. + + iwpriv ethX fwt_cleanup + + The command does returns the number of invalid/expired routes deleted. + +fwt_time + This command returns a card's internal time representation. It is this + time that is used to represent the expiration times of FWT entries. The + number is not consistent from card to card; it is simply a timer count. + The fwt_time command is used to inspect the timer so that expiration + times reported by fwt_list can be properly interpreted. + + iwpriv ethX fwt_time + +mesh_get_ttl + + The mesh ttl is the number of hops a mesh packet can traverse before it + is dropped. This parameter is used to prevent infinite loops in the + mesh network. The value returned by this function is the ttl assigned + to all mesh packets. Currently there is no way to control the ttl on a + per packet or per socket basis. + + iwpriv ethX mesh_get_ttl + +mesh_set_ttl ttl + + Set the ttl. The argument must be between 0 and 255. + + iwpriv ethX mesh_set_ttl + ========================= ETHTOOL ========================= diff --git a/trunk/drivers/net/wireless/libertas/assoc.c b/trunk/drivers/net/wireless/libertas/assoc.c index afd5617dd92b..f67efa0815fe 100644 --- a/trunk/drivers/net/wireless/libertas/assoc.c +++ b/trunk/drivers/net/wireless/libertas/assoc.c @@ -323,8 +323,6 @@ static int assoc_helper_secinfo(wlan_private *priv, { wlan_adapter *adapter = priv->adapter; int ret = 0; - u32 do_wpa; - u32 rsn = 0; lbs_deb_enter(LBS_DEB_ASSOC); @@ -335,34 +333,12 @@ static int assoc_helper_secinfo(wlan_private *priv, if (ret) goto out; - /* If RSN is already enabled, don't try to enable it again, since - * ENABLE_RSN resets internal state machines and will clobber the - * 4-way WPA handshake. - */ - - /* Get RSN enabled/disabled */ + /* enable/disable RSN */ ret = libertas_prepare_and_send_command(priv, cmd_802_11_enable_rsn, cmd_act_set, cmd_option_waitforrsp, - 0, &rsn); - if (ret) { - lbs_deb_assoc("Failed to get RSN status: %d", ret); - goto out; - } - - /* Don't re-enable RSN if it's already enabled */ - do_wpa = (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled); - if (do_wpa == rsn) - goto out; - - /* Set RSN enabled/disabled */ - rsn = do_wpa; - ret = libertas_prepare_and_send_command(priv, - cmd_802_11_enable_rsn, - cmd_act_set, - cmd_option_waitforrsp, - 0, &rsn); + 0, assoc_req); out: lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); diff --git a/trunk/drivers/net/wireless/libertas/cmd.c b/trunk/drivers/net/wireless/libertas/cmd.c index 13f6528abb00..124e029f1bf4 100644 --- a/trunk/drivers/net/wireless/libertas/cmd.c +++ b/trunk/drivers/net/wireless/libertas/cmd.c @@ -228,19 +228,17 @@ static int wlan_cmd_802_11_enable_rsn(wlan_private * priv, void * pdata_buf) { struct cmd_ds_802_11_enable_rsn *penableRSN = &cmd->params.enbrsn; - u32 * enable = pdata_buf; + struct assoc_request * assoc_req = pdata_buf; lbs_deb_enter(LBS_DEB_CMD); cmd->command = cpu_to_le16(cmd_802_11_enable_rsn); cmd->size = cpu_to_le16(sizeof(*penableRSN) + S_DS_GEN); penableRSN->action = cpu_to_le16(cmd_action); - - if (cmd_action == cmd_act_set) { - if (*enable) - penableRSN->enable = cpu_to_le16(cmd_enable_rsn); - else - penableRSN->enable = cpu_to_le16(cmd_enable_rsn); + if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { + penableRSN->enable = cpu_to_le16(cmd_enable_rsn); + } else { + penableRSN->enable = cpu_to_le16(cmd_disable_rsn); } lbs_deb_leave(LBS_DEB_CMD); diff --git a/trunk/drivers/net/wireless/libertas/cmdresp.c b/trunk/drivers/net/wireless/libertas/cmdresp.c index 6ac0d4752fa4..0c3b9a583d83 100644 --- a/trunk/drivers/net/wireless/libertas/cmdresp.c +++ b/trunk/drivers/net/wireless/libertas/cmdresp.c @@ -537,24 +537,6 @@ static int wlan_ret_get_log(wlan_private * priv, return 0; } -static int libertas_ret_802_11_enable_rsn(wlan_private * priv, - struct cmd_ds_command *resp) -{ - struct cmd_ds_802_11_enable_rsn *enable_rsn = &resp->params.enbrsn; - wlan_adapter *adapter = priv->adapter; - u32 * pdata_buf = adapter->cur_cmd->pdata_buf; - - lbs_deb_enter(LBS_DEB_CMD); - - if (enable_rsn->action == cpu_to_le16(cmd_act_get)) { - if (pdata_buf) - *pdata_buf = (u32) le16_to_cpu(enable_rsn->enable); - } - - lbs_deb_enter(LBS_DEB_CMD); - return 0; -} - static inline int handle_cmd_response(u16 respcmd, struct cmd_ds_command *resp, wlan_private *priv) @@ -628,10 +610,7 @@ static inline int handle_cmd_response(u16 respcmd, case cmd_ret_802_11_authenticate: case cmd_ret_802_11_radio_control: case cmd_ret_802_11_beacon_stop: - break; - case cmd_ret_802_11_enable_rsn: - ret = libertas_ret_802_11_enable_rsn(priv, resp); break; case cmd_ret_802_11_data_rate: diff --git a/trunk/drivers/net/wireless/libertas/hostcmd.h b/trunk/drivers/net/wireless/libertas/hostcmd.h index 09b898f6719c..3acf93988125 100644 --- a/trunk/drivers/net/wireless/libertas/hostcmd.h +++ b/trunk/drivers/net/wireless/libertas/hostcmd.h @@ -503,7 +503,7 @@ struct cmd_ds_802_11_ad_hoc_join { struct cmd_ds_802_11_enable_rsn { __le16 action; __le16 enable; -} __attribute__ ((packed)); +}; struct MrvlIEtype_keyParamSet { /* type ID */ diff --git a/trunk/drivers/net/wireless/libertas/ioctl.c b/trunk/drivers/net/wireless/libertas/ioctl.c new file mode 100644 index 000000000000..f41081585564 --- /dev/null +++ b/trunk/drivers/net/wireless/libertas/ioctl.c @@ -0,0 +1,1081 @@ +/** + * This file contains ioctl functions + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "host.h" +#include "radiotap.h" +#include "decl.h" +#include "defs.h" +#include "dev.h" +#include "join.h" +#include "wext.h" + +#define MAX_SCAN_CELL_SIZE (IW_EV_ADDR_LEN + \ + IW_ESSID_MAX_SIZE + \ + IW_EV_UINT_LEN + IW_EV_FREQ_LEN + \ + IW_EV_QUAL_LEN + IW_ESSID_MAX_SIZE + \ + IW_EV_PARAM_LEN + 40) /* 40 for WPAIE */ + +#define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ) + +static int wlan_set_region(wlan_private * priv, u16 region_code) +{ + int i; + int ret = 0; + + for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { + // use the region code to search for the index + if (region_code == libertas_region_code_to_index[i]) { + priv->adapter->regiontableindex = (u16) i; + priv->adapter->regioncode = region_code; + break; + } + } + + // if it's unidentified region code + if (i >= MRVDRV_MAX_REGION_CODE) { + lbs_deb_ioctl("region Code not identified\n"); + ret = -1; + goto done; + } + + if (libertas_set_regiontable(priv, priv->adapter->regioncode, 0)) { + ret = -EINVAL; + } + +done: + lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret); + return ret; +} + +static inline int hex2int(char c) +{ + if (c >= '0' && c <= '9') + return (c - '0'); + if (c >= 'a' && c <= 'f') + return (c - 'a' + 10); + if (c >= 'A' && c <= 'F') + return (c - 'A' + 10); + return -1; +} + +/* Convert a string representation of a MAC address ("xx:xx:xx:xx:xx:xx") + into binary format (6 bytes). + + This function expects that each byte is represented with 2 characters + (e.g., 11:2:11:11:11:11 is invalid) + + */ +static char *eth_str2addr(char *ethstr, u8 * addr) +{ + int i, val, val2; + char *pos = ethstr; + + /* get rid of initial blanks */ + while (*pos == ' ' || *pos == '\t') + ++pos; + + for (i = 0; i < 6; i++) { + val = hex2int(*pos++); + if (val < 0) + return NULL; + val2 = hex2int(*pos++); + if (val2 < 0) + return NULL; + addr[i] = (val * 16 + val2) & 0xff; + + if (i < 5 && *pos++ != ':') + return NULL; + } + return pos; +} + +/* this writes xx:xx:xx:xx:xx:xx into ethstr + (ethstr must have space for 18 chars) */ +static int eth_addr2str(u8 * addr, char *ethstr) +{ + int i; + char *pos = ethstr; + + for (i = 0; i < 6; i++) { + sprintf(pos, "%02x", addr[i] & 0xff); + pos += 2; + if (i < 5) + *pos++ = ':'; + } + return 17; +} + +/** + * @brief Add an entry to the BT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_bt_add_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char ethaddrs_str[18]; + char *pos; + u8 ethaddr[ETH_ALEN]; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(ethaddrs_str, wrq->u.data.pointer, + sizeof(ethaddrs_str))) + return -EFAULT; + + if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) { + lbs_pr_info("BT_ADD: Invalid MAC address\n"); + return -EINVAL; + } + + lbs_deb_ioctl("BT: adding %s\n", ethaddrs_str); + ret = libertas_prepare_and_send_command(priv, cmd_bt_access, + cmd_act_bt_access_add, + cmd_option_waitforrsp, 0, ethaddr); + lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret); + return ret; +} + +/** + * @brief Delete an entry from the BT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_bt_del_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char ethaddrs_str[18]; + u8 ethaddr[ETH_ALEN]; + char *pos; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(ethaddrs_str, wrq->u.data.pointer, + sizeof(ethaddrs_str))) + return -EFAULT; + + if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) { + lbs_pr_info("Invalid MAC address\n"); + return -EINVAL; + } + + lbs_deb_ioctl("BT: deleting %s\n", ethaddrs_str); + + return (libertas_prepare_and_send_command(priv, + cmd_bt_access, + cmd_act_bt_access_del, + cmd_option_waitforrsp, 0, ethaddr)); + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Reset all entries from the BT table + * @param priv A pointer to wlan_private structure + * @return 0 --success, otherwise fail + */ +static int wlan_bt_reset_ioctl(wlan_private * priv) +{ + lbs_deb_enter(LBS_DEB_IOCTL); + + lbs_pr_alert( "BT: resetting\n"); + + return (libertas_prepare_and_send_command(priv, + cmd_bt_access, + cmd_act_bt_access_reset, + cmd_option_waitforrsp, 0, NULL)); + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief List an entry from the BT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_bt_list_ioctl(wlan_private * priv, struct ifreq *req) +{ + int pos; + char *addr1; + struct iwreq *wrq = (struct iwreq *)req; + /* used to pass id and store the bt entry returned by the FW */ + union { + u32 id; + char addr1addr2[2 * ETH_ALEN]; + } param; + static char outstr[64]; + char *pbuf = outstr; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(outstr, wrq->u.data.pointer, sizeof(outstr))) { + lbs_deb_ioctl("Copy from user failed\n"); + return -1; + } + param.id = simple_strtoul(outstr, NULL, 10); + pos = sprintf(pbuf, "%d: ", param.id); + pbuf += pos; + + ret = libertas_prepare_and_send_command(priv, cmd_bt_access, + cmd_act_bt_access_list, + cmd_option_waitforrsp, 0, + (char *)¶m); + + if (ret == 0) { + addr1 = param.addr1addr2; + + pos = sprintf(pbuf, "BT includes node "); + pbuf += pos; + pos = eth_addr2str(addr1, pbuf); + pbuf += pos; + } else { + sprintf(pbuf, "(null)"); + pbuf += pos; + } + + wrq->u.data.length = strlen(outstr); + if (copy_to_user(wrq->u.data.pointer, (char *)outstr, + wrq->u.data.length)) { + lbs_deb_ioctl("BT_LIST: Copy to user failed!\n"); + return -EFAULT; + } + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0 ; +} + +/** + * @brief Sets inverted state of blacklist (non-zero if inverted) + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_bt_set_invert_ioctl(wlan_private * priv, struct ifreq *req) +{ + int ret; + struct iwreq *wrq = (struct iwreq *)req; + union { + u32 id; + char addr1addr2[2 * ETH_ALEN]; + } param; + + lbs_deb_enter(LBS_DEB_IOCTL); + + param.id = SUBCMD_DATA(wrq) ; + ret = libertas_prepare_and_send_command(priv, cmd_bt_access, + cmd_act_bt_access_set_invert, + cmd_option_waitforrsp, 0, + (char *)¶m); + if (ret != 0) + return -EFAULT; + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Gets inverted state of blacklist (non-zero if inverted) + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_bt_get_invert_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + int ret; + union { + u32 id; + char addr1addr2[2 * ETH_ALEN]; + } param; + + lbs_deb_enter(LBS_DEB_IOCTL); + + ret = libertas_prepare_and_send_command(priv, cmd_bt_access, + cmd_act_bt_access_get_invert, + cmd_option_waitforrsp, 0, + (char *)¶m); + + if (ret == 0) + wrq->u.param.value = le32_to_cpu(param.id); + else + return -EFAULT; + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Find the next parameter in an input string + * @param ptr A pointer to the input parameter string + * @return A pointer to the next parameter, or 0 if no parameters left. + */ +static char * next_param(char * ptr) +{ + if (!ptr) return NULL; + while (*ptr == ' ' || *ptr == '\t') ++ptr; + return (*ptr == '\0') ? NULL : ptr; +} + +/** + * @brief Add an entry to the FWT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_add_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char in_str[128]; + static struct cmd_ds_fwt_access fwt_access; + char *ptr; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) + return -EFAULT; + + if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) { + lbs_pr_alert( "FWT_ADD: Invalid MAC address 1\n"); + return -EINVAL; + } + + if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) { + lbs_pr_alert( "FWT_ADD: Invalid MAC address 2\n"); + return -EINVAL; + } + + if ((ptr = next_param(ptr))) + fwt_access.metric = + cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + else + fwt_access.metric = cpu_to_le32(FWT_DEFAULT_METRIC); + + if ((ptr = next_param(ptr))) + fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10); + else + fwt_access.dir = FWT_DEFAULT_DIR; + + if ((ptr = next_param(ptr))) + fwt_access.rate = (u8) simple_strtoul(ptr, &ptr, 10); + else + fwt_access.rate = FWT_DEFAULT_RATE; + + if ((ptr = next_param(ptr))) + fwt_access.ssn = + cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + else + fwt_access.ssn = cpu_to_le32(FWT_DEFAULT_SSN); + + if ((ptr = next_param(ptr))) + fwt_access.dsn = + cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + else + fwt_access.dsn = cpu_to_le32(FWT_DEFAULT_DSN); + + if ((ptr = next_param(ptr))) + fwt_access.hopcount = simple_strtoul(ptr, &ptr, 10); + else + fwt_access.hopcount = FWT_DEFAULT_HOPCOUNT; + + if ((ptr = next_param(ptr))) + fwt_access.ttl = simple_strtoul(ptr, &ptr, 10); + else + fwt_access.ttl = FWT_DEFAULT_TTL; + + if ((ptr = next_param(ptr))) + fwt_access.expiration = + cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + else + fwt_access.expiration = cpu_to_le32(FWT_DEFAULT_EXPIRATION); + + if ((ptr = next_param(ptr))) + fwt_access.sleepmode = (u8)simple_strtoul(ptr, &ptr, 10); + else + fwt_access.sleepmode = FWT_DEFAULT_SLEEPMODE; + + if ((ptr = next_param(ptr))) + fwt_access.snr = + cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + else + fwt_access.snr = cpu_to_le32(FWT_DEFAULT_SNR); + +#ifdef DEBUG + { + char ethaddr1_str[18], ethaddr2_str[18]; + eth_addr2str(fwt_access.da, ethaddr1_str); + eth_addr2str(fwt_access.ra, ethaddr2_str); + lbs_deb_ioctl("FWT_ADD: adding (da:%s,%i,ra:%s)\n", ethaddr1_str, + fwt_access.dir, ethaddr2_str); + lbs_deb_ioctl("FWT_ADD: ssn:%u dsn:%u met:%u hop:%u ttl:%u exp:%u slp:%u snr:%u\n", + fwt_access.ssn, fwt_access.dsn, fwt_access.metric, + fwt_access.hopcount, fwt_access.ttl, fwt_access.expiration, + fwt_access.sleepmode, fwt_access.snr); + } +#endif + + ret = libertas_prepare_and_send_command(priv, cmd_fwt_access, + cmd_act_fwt_access_add, + cmd_option_waitforrsp, 0, + (void *)&fwt_access); + + lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret); + return ret; +} + +/** + * @brief Delete an entry from the FWT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_del_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char in_str[64]; + static struct cmd_ds_fwt_access fwt_access; + char *ptr; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) + return -EFAULT; + + if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) { + lbs_pr_alert( "FWT_DEL: Invalid MAC address 1\n"); + return -EINVAL; + } + + if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) { + lbs_pr_alert( "FWT_DEL: Invalid MAC address 2\n"); + return -EINVAL; + } + + if ((ptr = next_param(ptr))) + fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10); + else + fwt_access.dir = FWT_DEFAULT_DIR; + +#ifdef DEBUG + { + char ethaddr1_str[18], ethaddr2_str[18]; + lbs_deb_ioctl("FWT_DEL: line is %s\n", in_str); + eth_addr2str(fwt_access.da, ethaddr1_str); + eth_addr2str(fwt_access.ra, ethaddr2_str); + lbs_deb_ioctl("FWT_DEL: removing (da:%s,ra:%s,dir:%d)\n", ethaddr1_str, + ethaddr2_str, fwt_access.dir); + } +#endif + + ret = libertas_prepare_and_send_command(priv, + cmd_fwt_access, + cmd_act_fwt_access_del, + cmd_option_waitforrsp, 0, + (void *)&fwt_access); + lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret); + return ret; +} + + +/** + * @brief Print route parameters + * @param fwt_access struct cmd_ds_fwt_access with route info + * @param buf destination buffer for route info + */ +static void print_route(struct cmd_ds_fwt_access fwt_access, char *buf) +{ + buf += sprintf(buf, " "); + buf += eth_addr2str(fwt_access.da, buf); + buf += sprintf(buf, " "); + buf += eth_addr2str(fwt_access.ra, buf); + buf += sprintf(buf, " %u", fwt_access.valid); + buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.metric)); + buf += sprintf(buf, " %u", fwt_access.dir); + buf += sprintf(buf, " %u", fwt_access.rate); + buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.ssn)); + buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.dsn)); + buf += sprintf(buf, " %u", fwt_access.hopcount); + buf += sprintf(buf, " %u", fwt_access.ttl); + buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.expiration)); + buf += sprintf(buf, " %u", fwt_access.sleepmode); + buf += sprintf(buf, " %u ", le32_to_cpu(fwt_access.snr)); + buf += eth_addr2str(fwt_access.prec, buf); +} + +/** + * @brief Lookup an entry in the FWT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_lookup_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char in_str[64]; + char *ptr; + static struct cmd_ds_fwt_access fwt_access; + static char out_str[128]; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) + return -EFAULT; + + if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) { + lbs_pr_alert( "FWT_LOOKUP: Invalid MAC address\n"); + return -EINVAL; + } + +#ifdef DEBUG + { + char ethaddr1_str[18]; + lbs_deb_ioctl("FWT_LOOKUP: line is %s\n", in_str); + eth_addr2str(fwt_access.da, ethaddr1_str); + lbs_deb_ioctl("FWT_LOOKUP: looking for (da:%s)\n", ethaddr1_str); + } +#endif + + ret = libertas_prepare_and_send_command(priv, + cmd_fwt_access, + cmd_act_fwt_access_lookup, + cmd_option_waitforrsp, 0, + (void *)&fwt_access); + + if (ret == 0) + print_route(fwt_access, out_str); + else + sprintf(out_str, "(null)"); + + wrq->u.data.length = strlen(out_str); + if (copy_to_user(wrq->u.data.pointer, (char *)out_str, + wrq->u.data.length)) { + lbs_deb_ioctl("FWT_LOOKUP: Copy to user failed!\n"); + return -EFAULT; + } + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Reset all entries from the FWT table + * @param priv A pointer to wlan_private structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_reset_ioctl(wlan_private * priv) +{ + lbs_deb_ioctl("FWT: resetting\n"); + + return (libertas_prepare_and_send_command(priv, + cmd_fwt_access, + cmd_act_fwt_access_reset, + cmd_option_waitforrsp, 0, NULL)); +} + +/** + * @brief List an entry from the FWT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_list_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char in_str[8]; + static struct cmd_ds_fwt_access fwt_access; + char *ptr = in_str; + static char out_str[128]; + char *pbuf = out_str; + int ret = 0; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) { + ret = -EFAULT; + goto out; + } + + fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + +#ifdef DEBUG + { + lbs_deb_ioctl("FWT_LIST: line is %s\n", in_str); + lbs_deb_ioctl("FWT_LIST: listing id:%i\n", le32_to_cpu(fwt_access.id)); + } +#endif + + ret = libertas_prepare_and_send_command(priv, cmd_fwt_access, + cmd_act_fwt_access_list, + cmd_option_waitforrsp, 0, (void *)&fwt_access); + + if (ret == 0) + print_route(fwt_access, pbuf); + else + pbuf += sprintf(pbuf, " (null)"); + + wrq->u.data.length = strlen(out_str); + if (copy_to_user(wrq->u.data.pointer, (char *)out_str, + wrq->u.data.length)) { + lbs_deb_ioctl("FWT_LIST: Copy to user failed!\n"); + ret = -EFAULT; + goto out; + } + + ret = 0; + +out: + lbs_deb_leave(LBS_DEB_IOCTL); + return ret; +} + +/** + * @brief List an entry from the FRT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_list_route_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char in_str[64]; + static struct cmd_ds_fwt_access fwt_access; + char *ptr = in_str; + static char out_str[128]; + char *pbuf = out_str; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) + return -EFAULT; + + fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + +#ifdef DEBUG + { + lbs_deb_ioctl("FWT_LIST_ROUTE: line is %s\n", in_str); + lbs_deb_ioctl("FWT_LIST_ROUTE: listing id:%i\n", le32_to_cpu(fwt_access.id)); + } +#endif + + ret = libertas_prepare_and_send_command(priv, cmd_fwt_access, + cmd_act_fwt_access_list_route, + cmd_option_waitforrsp, 0, (void *)&fwt_access); + + if (ret == 0) { + print_route(fwt_access, pbuf); + } else + pbuf += sprintf(pbuf, " (null)"); + + wrq->u.data.length = strlen(out_str); + if (copy_to_user(wrq->u.data.pointer, (char *)out_str, + wrq->u.data.length)) { + lbs_deb_ioctl("FWT_LIST_ROUTE: Copy to user failed!\n"); + return -EFAULT; + } + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief List an entry from the FNT table + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_list_neighbor_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + char in_str[8]; + static struct cmd_ds_fwt_access fwt_access; + char *ptr = in_str; + static char out_str[128]; + char *pbuf = out_str; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) + return -EFAULT; + + memset(&fwt_access, 0, sizeof(fwt_access)); + fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10)); + +#ifdef DEBUG + { + lbs_deb_ioctl("FWT_LIST_NEIGHBOR: line is %s\n", in_str); + lbs_deb_ioctl("FWT_LIST_NEIGHBOR: listing id:%i\n", le32_to_cpu(fwt_access.id)); + } +#endif + + ret = libertas_prepare_and_send_command(priv, cmd_fwt_access, + cmd_act_fwt_access_list_neighbor, + cmd_option_waitforrsp, 0, + (void *)&fwt_access); + + if (ret == 0) { + pbuf += sprintf(pbuf, " ra "); + pbuf += eth_addr2str(fwt_access.ra, pbuf); + pbuf += sprintf(pbuf, " slp %u", fwt_access.sleepmode); + pbuf += sprintf(pbuf, " snr %u", le32_to_cpu(fwt_access.snr)); + pbuf += sprintf(pbuf, " ref %u", le32_to_cpu(fwt_access.references)); + } else + pbuf += sprintf(pbuf, " (null)"); + + wrq->u.data.length = strlen(out_str); + if (copy_to_user(wrq->u.data.pointer, (char *)out_str, + wrq->u.data.length)) { + lbs_deb_ioctl("FWT_LIST_NEIGHBOR: Copy to user failed!\n"); + return -EFAULT; + } + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Cleans up the route (FRT) and neighbor (FNT) tables + * (Garbage Collection) + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + static struct cmd_ds_fwt_access fwt_access; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + lbs_deb_ioctl("FWT: cleaning up\n"); + + memset(&fwt_access, 0, sizeof(fwt_access)); + + ret = libertas_prepare_and_send_command(priv, cmd_fwt_access, + cmd_act_fwt_access_cleanup, + cmd_option_waitforrsp, 0, + (void *)&fwt_access); + + if (ret == 0) + wrq->u.param.value = le32_to_cpu(fwt_access.references); + else + return -EFAULT; + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Gets firmware internal time (debug purposes) + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + static struct cmd_ds_fwt_access fwt_access; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + lbs_deb_ioctl("FWT: getting time\n"); + + memset(&fwt_access, 0, sizeof(fwt_access)); + + ret = libertas_prepare_and_send_command(priv, cmd_fwt_access, + cmd_act_fwt_access_time, + cmd_option_waitforrsp, 0, + (void *)&fwt_access); + + if (ret == 0) + wrq->u.param.value = le32_to_cpu(fwt_access.references); + else + return -EFAULT; + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Gets mesh ttl from firmware + * @param priv A pointer to wlan_private structure + * @param req A pointer to ifreq structure + * @return 0 --success, otherwise fail + */ +static int wlan_mesh_get_ttl_ioctl(wlan_private * priv, struct ifreq *req) +{ + struct iwreq *wrq = (struct iwreq *)req; + struct cmd_ds_mesh_access mesh_access; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + memset(&mesh_access, 0, sizeof(mesh_access)); + + ret = libertas_prepare_and_send_command(priv, cmd_mesh_access, + cmd_act_mesh_get_ttl, + cmd_option_waitforrsp, 0, + (void *)&mesh_access); + + if (ret == 0) + wrq->u.param.value = le32_to_cpu(mesh_access.data[0]); + else + return -EFAULT; + + lbs_deb_leave(LBS_DEB_IOCTL); + return 0; +} + +/** + * @brief Gets mesh ttl from firmware + * @param priv A pointer to wlan_private structure + * @param ttl New ttl value + * @return 0 --success, otherwise fail + */ +static int wlan_mesh_set_ttl_ioctl(wlan_private * priv, int ttl) +{ + struct cmd_ds_mesh_access mesh_access; + int ret; + + lbs_deb_enter(LBS_DEB_IOCTL); + + if( (ttl > 0xff) || (ttl < 0) ) + return -EINVAL; + + memset(&mesh_access, 0, sizeof(mesh_access)); + mesh_access.data[0] = cpu_to_le32(ttl); + + ret = libertas_prepare_and_send_command(priv, cmd_mesh_access, + cmd_act_mesh_set_ttl, + cmd_option_waitforrsp, 0, + (void *)&mesh_access); + + if (ret != 0) + ret = -EFAULT; + + lbs_deb_leave(LBS_DEB_IOCTL); + return ret; +} + +/** + * @brief ioctl function - entry point + * + * @param dev A pointer to net_device structure + * @param req A pointer to ifreq structure + * @param cmd command + * @return 0--success, otherwise fail + */ +int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + int subcmd = 0; + int idata = 0; + int *pdata; + int ret = 0; + wlan_private *priv = dev->priv; + wlan_adapter *adapter = priv->adapter; + struct iwreq *wrq = (struct iwreq *)req; + + lbs_deb_enter(LBS_DEB_IOCTL); + + lbs_deb_ioctl("libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd); + switch (cmd) { + case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */ + switch (wrq->u.data.flags) { + case WLAN_SUBCMD_BT_RESET: /* bt_reset */ + wlan_bt_reset_ioctl(priv); + break; + case WLAN_SUBCMD_FWT_RESET: /* fwt_reset */ + wlan_fwt_reset_ioctl(priv); + break; + } /* End of switch */ + break; + + case WLAN_SETONEINT_GETNONE: + /* The first 4 bytes of req->ifr_data is sub-ioctl number + * after 4 bytes sits the payload. + */ + subcmd = wrq->u.data.flags; + if (!subcmd) + subcmd = (int)wrq->u.param.value; + + switch (subcmd) { + case WLANSETREGION: + idata = SUBCMD_DATA(wrq); + ret = wlan_set_region(priv, (u16) idata); + break; + case WLAN_SUBCMD_MESH_SET_TTL: + idata = SUBCMD_DATA(wrq); + ret = wlan_mesh_set_ttl_ioctl(priv, idata); + break; + + case WLAN_SUBCMD_BT_SET_INVERT: + ret = wlan_bt_set_invert_ioctl(priv, req); + break ; + + default: + ret = -EOPNOTSUPP; + break; + } + + break; + + case WLAN_SET128CHAR_GET128CHAR: + switch ((int)wrq->u.data.flags) { + case WLAN_SUBCMD_BT_ADD: + ret = wlan_bt_add_ioctl(priv, req); + break; + case WLAN_SUBCMD_BT_DEL: + ret = wlan_bt_del_ioctl(priv, req); + break; + case WLAN_SUBCMD_BT_LIST: + ret = wlan_bt_list_ioctl(priv, req); + break; + case WLAN_SUBCMD_FWT_ADD: + ret = wlan_fwt_add_ioctl(priv, req); + break; + case WLAN_SUBCMD_FWT_DEL: + ret = wlan_fwt_del_ioctl(priv, req); + break; + case WLAN_SUBCMD_FWT_LOOKUP: + ret = wlan_fwt_lookup_ioctl(priv, req); + break; + case WLAN_SUBCMD_FWT_LIST_NEIGHBOR: + ret = wlan_fwt_list_neighbor_ioctl(priv, req); + break; + case WLAN_SUBCMD_FWT_LIST: + ret = wlan_fwt_list_ioctl(priv, req); + break; + case WLAN_SUBCMD_FWT_LIST_ROUTE: + ret = wlan_fwt_list_route_ioctl(priv, req); + break; + } + break; + + case WLAN_SETNONE_GETONEINT: + switch (wrq->u.param.value) { + case WLANGETREGION: + pdata = (int *)wrq->u.name; + *pdata = (int)adapter->regioncode; + break; + case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */ + ret = wlan_fwt_cleanup_ioctl(priv, req); + break; + + case WLAN_SUBCMD_FWT_TIME: /* fwt_time */ + ret = wlan_fwt_time_ioctl(priv, req); + break; + + case WLAN_SUBCMD_MESH_GET_TTL: + ret = wlan_mesh_get_ttl_ioctl(priv, req); + break; + + case WLAN_SUBCMD_BT_GET_INVERT: + ret = wlan_bt_get_invert_ioctl(priv, req); + break ; + + default: + ret = -EOPNOTSUPP; + + } + + break; + + case WLAN_SET_GET_SIXTEEN_INT: + switch ((int)wrq->u.data.flags) { + case WLAN_LED_GPIO_CTRL: + { + int i; + int data[16]; + + struct cmd_ds_802_11_led_ctrl ctrl; + struct mrvlietypes_ledgpio *gpio = + (struct mrvlietypes_ledgpio *) ctrl.data; + + memset(&ctrl, 0, sizeof(ctrl)); + if (wrq->u.data.length > MAX_LEDS * 2) + return -ENOTSUPP; + if ((wrq->u.data.length % 2) != 0) + return -ENOTSUPP; + if (wrq->u.data.length == 0) { + ctrl.action = + cpu_to_le16 + (cmd_act_get); + } else { + if (copy_from_user + (data, wrq->u.data.pointer, + sizeof(int) * + wrq->u.data.length)) { + lbs_deb_ioctl( + "Copy from user failed\n"); + return -EFAULT; + } + + ctrl.action = + cpu_to_le16 + (cmd_act_set); + ctrl.numled = cpu_to_le16(0); + gpio->header.type = + cpu_to_le16(TLV_TYPE_LED_GPIO); + gpio->header.len = wrq->u.data.length; + for (i = 0; i < wrq->u.data.length; + i += 2) { + gpio->ledpin[i / 2].led = + data[i]; + gpio->ledpin[i / 2].pin = + data[i + 1]; + } + } + ret = + libertas_prepare_and_send_command(priv, + cmd_802_11_led_gpio_ctrl, + 0, + cmd_option_waitforrsp, + 0, (void *)&ctrl); + for (i = 0; i < gpio->header.len; i += 2) { + data[i] = gpio->ledpin[i / 2].led; + data[i + 1] = gpio->ledpin[i / 2].pin; + } + if (copy_to_user(wrq->u.data.pointer, data, + sizeof(int) * + gpio->header.len)) { + lbs_deb_ioctl("Copy to user failed\n"); + return -EFAULT; + } + + wrq->u.data.length = gpio->header.len; + } + break; + } + break; + + default: + ret = -EINVAL; + break; + } + + lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret); + return ret; +} + + diff --git a/trunk/drivers/net/wireless/libertas/main.c b/trunk/drivers/net/wireless/libertas/main.c index 4a59306a3f05..623ab4b16973 100644 --- a/trunk/drivers/net/wireless/libertas/main.c +++ b/trunk/drivers/net/wireless/libertas/main.c @@ -181,8 +181,7 @@ u16 libertas_region_code_to_index[MRVDRV_MAX_REGION_CODE] = * @brief Get function for sysfs attribute anycast_mask */ static ssize_t libertas_anycast_get(struct device * dev, - struct device_attribute *attr, char * buf) -{ + struct device_attribute *attr, char * buf) { struct cmd_ds_mesh_access mesh_access; memset(&mesh_access, 0, sizeof(mesh_access)); @@ -198,8 +197,7 @@ static ssize_t libertas_anycast_get(struct device * dev, * @brief Set function for sysfs attribute anycast_mask */ static ssize_t libertas_anycast_set(struct device * dev, - struct device_attribute *attr, const char * buf, size_t count) -{ + struct device_attribute *attr, const char * buf, size_t count) { struct cmd_ds_mesh_access mesh_access; uint32_t datum; @@ -801,6 +799,7 @@ wlan_private *libertas_add_card(void *card, struct device *dmdev) dev->open = wlan_open; dev->hard_start_xmit = wlan_pre_start_xmit; dev->stop = wlan_close; + dev->do_ioctl = libertas_do_ioctl; dev->set_mac_address = wlan_set_mac_address; dev->tx_timeout = wlan_tx_timeout; dev->get_stats = wlan_get_stats; @@ -919,6 +918,7 @@ int libertas_add_mesh(wlan_private *priv, struct device *dev) mesh_dev->open = mesh_open; mesh_dev->hard_start_xmit = mesh_pre_start_xmit; mesh_dev->stop = mesh_close; + mesh_dev->do_ioctl = libertas_do_ioctl; mesh_dev->get_stats = wlan_get_stats; mesh_dev->set_mac_address = wlan_set_mac_address; mesh_dev->ethtool_ops = &libertas_ethtool_ops; diff --git a/trunk/drivers/net/wireless/libertas/scan.c b/trunk/drivers/net/wireless/libertas/scan.c index c3043dcb541e..606af50fa09b 100644 --- a/trunk/drivers/net/wireless/libertas/scan.c +++ b/trunk/drivers/net/wireless/libertas/scan.c @@ -214,6 +214,38 @@ static int is_network_compatible(wlan_adapter * adapter, return matched; } +/** + * @brief Post process the scan table after a new scan command has completed + * + * Inspect each entry of the scan table and try to find an entry that + * matches our current associated/joined network from the scan. If + * one is found, update the stored copy of the bssdescriptor for our + * current network. + * + * Debug dump the current scan table contents if compiled accordingly. + * + * @param priv A pointer to wlan_private structure + * + * @return void + */ +static void wlan_scan_process_results(wlan_private * priv) +{ + wlan_adapter *adapter = priv->adapter; + struct bss_descriptor * iter_bss; + int i = 0; + + if (adapter->connect_status == libertas_connected) + return; + + mutex_lock(&adapter->lock); + list_for_each_entry (iter_bss, &adapter->network_list, list) { + lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n", + i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi, + escape_essid(iter_bss->ssid, iter_bss->ssid_len)); + } + mutex_unlock(&adapter->lock); +} + /** * @brief Create a channel list for the driver to scan based on region info * @@ -759,10 +791,6 @@ int wlan_scan_networks(wlan_private * priv, u8 scancurrentchanonly; int maxchanperscan; int ret; -#ifdef CONFIG_LIBERTAS_DEBUG - struct bss_descriptor * iter_bss; - int i = 0; -#endif lbs_deb_enter(LBS_DEB_ASSOC); @@ -804,16 +832,11 @@ int wlan_scan_networks(wlan_private * priv, puserscanin, full_scan); -#ifdef CONFIG_LIBERTAS_DEBUG - /* Dump the scan table */ - mutex_lock(&adapter->lock); - list_for_each_entry (iter_bss, &adapter->network_list, list) { - lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n", - i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi, - escape_essid(iter_bss->ssid, iter_bss->ssid_len)); - } - mutex_unlock(&adapter->lock); -#endif + /* Process the resulting scan table: + * - Remove any bad ssids + * - Update our current BSS information from scan data + */ + wlan_scan_process_results(priv); if (priv->adapter->connect_status == libertas_connected) { netif_carrier_on(priv->dev); diff --git a/trunk/drivers/net/wireless/libertas/wext.c b/trunk/drivers/net/wireless/libertas/wext.c index f42b796b5e47..8939251a2f4c 100644 --- a/trunk/drivers/net/wireless/libertas/wext.c +++ b/trunk/drivers/net/wireless/libertas/wext.c @@ -913,6 +913,148 @@ static int wlan_get_power(struct net_device *dev, struct iw_request_info *info, return 0; } +/* + * iwpriv settable callbacks + */ + +static const iw_handler wlan_private_handler[] = { + NULL, /* SIOCIWFIRSTPRIV */ +}; + +static const struct iw_priv_args wlan_private_args[] = { + /* + * { cmd, set_args, get_args, name } + */ + /* Using iwpriv sub-command feature */ + { + WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */ + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_NONE, + ""}, + { + WLANSETREGION, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_NONE, + "setregioncode"}, + { + WLAN_SUBCMD_MESH_SET_TTL, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_NONE, + "mesh_set_ttl"}, + { + WLAN_SETNONE_GETONEINT, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + ""}, + { + WLANGETREGION, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "getregioncode"}, + { + WLAN_SUBCMD_FWT_CLEANUP, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "fwt_cleanup"}, + { + WLAN_SUBCMD_FWT_TIME, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "fwt_time"}, + { + WLAN_SUBCMD_MESH_GET_TTL, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "mesh_get_ttl"}, + { + WLAN_SETNONE_GETNONE, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_NONE, + ""}, + { + WLAN_SUBCMD_FWT_RESET, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_NONE, + "fwt_reset"}, + { + WLAN_SUBCMD_BT_RESET, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_NONE, + "bt_reset"}, + { + WLAN_SET128CHAR_GET128CHAR, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + ""}, + /* BT Management */ + { + WLAN_SUBCMD_BT_ADD, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "bt_add"}, + { + WLAN_SUBCMD_BT_DEL, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "bt_del"}, + { + WLAN_SUBCMD_BT_LIST, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "bt_list"}, + { + WLAN_SUBCMD_BT_SET_INVERT, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_NONE, + "bt_set_invert"}, + { + WLAN_SUBCMD_BT_GET_INVERT, + IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "bt_get_invert"}, + /* FWT Management */ + { + WLAN_SUBCMD_FWT_ADD, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "fwt_add"}, + { + WLAN_SUBCMD_FWT_DEL, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "fwt_del"}, + { + WLAN_SUBCMD_FWT_LOOKUP, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "fwt_lookup"}, + { + WLAN_SUBCMD_FWT_LIST_NEIGHBOR, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "fwt_list_neigh"}, + { + WLAN_SUBCMD_FWT_LIST, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "fwt_list"}, + { + WLAN_SUBCMD_FWT_LIST_ROUTE, + IW_PRIV_TYPE_CHAR | 128, + IW_PRIV_TYPE_CHAR | 128, + "fwt_list_route"}, + { + WLAN_SET_GET_SIXTEEN_INT, + IW_PRIV_TYPE_INT | 16, + IW_PRIV_TYPE_INT | 16, + ""}, + { + WLAN_LED_GPIO_CTRL, + IW_PRIV_TYPE_INT | 16, + IW_PRIV_TYPE_INT | 16, + "ledgpio"}, +}; + static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev) { enum { @@ -2302,12 +2444,22 @@ static const iw_handler mesh_wlan_handler[] = { }; struct iw_handler_def libertas_handler_def = { .num_standard = sizeof(wlan_handler) / sizeof(iw_handler), + .num_private = sizeof(wlan_private_handler) / sizeof(iw_handler), + .num_private_args = sizeof(wlan_private_args) / + sizeof(struct iw_priv_args), .standard = (iw_handler *) wlan_handler, + .private = (iw_handler *) wlan_private_handler, + .private_args = (struct iw_priv_args *)wlan_private_args, .get_wireless_stats = wlan_get_wireless_stats, }; struct iw_handler_def mesh_handler_def = { .num_standard = sizeof(mesh_wlan_handler) / sizeof(iw_handler), + .num_private = sizeof(wlan_private_handler) / sizeof(iw_handler), + .num_private_args = sizeof(wlan_private_args) / + sizeof(struct iw_priv_args), .standard = (iw_handler *) mesh_wlan_handler, + .private = (iw_handler *) wlan_private_handler, + .private_args = (struct iw_priv_args *)wlan_private_args, .get_wireless_stats = wlan_get_wireless_stats, }; diff --git a/trunk/drivers/net/wireless/libertas/wext.h b/trunk/drivers/net/wireless/libertas/wext.h index 3d5196c9553a..d555056b25b7 100644 --- a/trunk/drivers/net/wireless/libertas/wext.h +++ b/trunk/drivers/net/wireless/libertas/wext.h @@ -7,6 +7,45 @@ #define SUBCMD_OFFSET 4 #define SUBCMD_DATA(x) *((int *)(x->u.name + SUBCMD_OFFSET)) +/** PRIVATE CMD ID */ +#define WLANIOCTL SIOCIWFIRSTPRIV + +#define WLAN_SETNONE_GETNONE (WLANIOCTL + 8) +#define WLAN_SUBCMD_BT_RESET 13 +#define WLAN_SUBCMD_FWT_RESET 14 + +#define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15) +#define WLANGETREGION 1 + +#define WLAN_SUBCMD_FWT_CLEANUP 15 +#define WLAN_SUBCMD_FWT_TIME 16 +#define WLAN_SUBCMD_MESH_GET_TTL 17 +#define WLAN_SUBCMD_BT_GET_INVERT 18 + +#define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24) +#define WLANSETREGION 8 +#define WLAN_SUBCMD_MESH_SET_TTL 18 +#define WLAN_SUBCMD_BT_SET_INVERT 19 + +#define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25) +#define WLAN_SUBCMD_BT_ADD 18 +#define WLAN_SUBCMD_BT_DEL 19 +#define WLAN_SUBCMD_BT_LIST 20 +#define WLAN_SUBCMD_FWT_ADD 21 +#define WLAN_SUBCMD_FWT_DEL 22 +#define WLAN_SUBCMD_FWT_LOOKUP 23 +#define WLAN_SUBCMD_FWT_LIST_NEIGHBOR 24 +#define WLAN_SUBCMD_FWT_LIST 25 +#define WLAN_SUBCMD_FWT_LIST_ROUTE 26 + +#define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29) +#define WLAN_LED_GPIO_CTRL 5 + +#define WLAN_LINKMODE_802_3 0 +#define WLAN_LINKMODE_802_11 2 +#define WLAN_RADIOMODE_NONE 0 +#define WLAN_RADIOMODE_RADIOTAP 2 + /** wlan_ioctl_regrdwr */ struct wlan_ioctl_regrdwr { /** Which register to access */ @@ -18,13 +57,9 @@ struct wlan_ioctl_regrdwr { u32 value; }; -#define WLAN_LINKMODE_802_3 0 -#define WLAN_LINKMODE_802_11 2 -#define WLAN_RADIOMODE_NONE 0 -#define WLAN_RADIOMODE_RADIOTAP 2 - extern struct iw_handler_def libertas_handler_def; extern struct iw_handler_def mesh_handler_def; +int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int i); int wlan_radio_ioctl(wlan_private * priv, u8 option); #endif /* _WLAN_WEXT_H_ */ diff --git a/trunk/drivers/scsi/Kconfig b/trunk/drivers/scsi/Kconfig index eb46cb0e3cb7..2b2f5c12019b 100644 --- a/trunk/drivers/scsi/Kconfig +++ b/trunk/drivers/scsi/Kconfig @@ -60,7 +60,6 @@ config BLK_DEV_SD depends on SCSI ---help--- If you want to use SCSI hard disks, Fibre Channel disks, - Serial ATA (SATA) or Parallel ATA (PATA) hard disks, USB storage or the SCSI or parallel port version of the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from diff --git a/trunk/fs/direct-io.c b/trunk/fs/direct-io.c index 52bb2638f7ab..8593f3dfd299 100644 --- a/trunk/fs/direct-io.c +++ b/trunk/fs/direct-io.c @@ -1106,7 +1106,7 @@ direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode, spin_lock_irqsave(&dio->bio_lock, flags); ret2 = --dio->refcount; spin_unlock_irqrestore(&dio->bio_lock, flags); - + BUG_ON(!dio->is_async && ret2 != 0); if (ret2 == 0) { ret = dio_complete(dio, offset, ret); kfree(dio); diff --git a/trunk/fs/jffs2/readinode.c b/trunk/fs/jffs2/readinode.c index 7b363786c2d2..12e83f67eee4 100644 --- a/trunk/fs/jffs2/readinode.c +++ b/trunk/fs/jffs2/readinode.c @@ -210,7 +210,8 @@ static void jffs2_kill_tn(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info * * offset, and the one with the smallest length will come first in the * ordering. * - * Returns 0 if the node was handled (including marking it obsolete) + * Returns 0 if the node was inserted + * 1 if the node is obsolete (because we can't mark it so yet) * < 0 an if error occurred */ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, @@ -571,7 +572,8 @@ static struct jffs2_raw_node_ref *jffs2_first_valid_node(struct jffs2_raw_node_r * Helper function for jffs2_get_inode_nodes(). * It is called every time an directory entry node is found. * - * Returns: 0 on success; + * Returns: 0 on succes; + * 1 if the node should be marked obsolete; * negative error code on failure. */ static inline int read_direntry(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref, @@ -678,7 +680,8 @@ static inline int read_direntry(struct jffs2_sb_info *c, struct jffs2_raw_node_r * Helper function for jffs2_get_inode_nodes(). * It is called every time an inode node is found. * - * Returns: 0 on success (possibly after marking a bad node obsolete); + * Returns: 0 on success; + * 1 if the node should be marked obsolete; * negative error code on failure. */ static inline int read_dnode(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref, @@ -687,7 +690,7 @@ static inline int read_dnode(struct jffs2_sb_info *c, struct jffs2_raw_node_ref { struct jffs2_tmp_dnode_info *tn; uint32_t len, csize; - int ret = 0; + int ret = 1; uint32_t crc; /* Obsoleted. This cannot happen, surely? dwmw2 20020308 */ @@ -716,9 +719,8 @@ static inline int read_dnode(struct jffs2_sb_info *c, struct jffs2_raw_node_ref /* Sanity checks */ if (unlikely(je32_to_cpu(rd->offset) > je32_to_cpu(rd->isize)) || unlikely(PAD(je32_to_cpu(rd->csize) + sizeof(*rd)) != PAD(je32_to_cpu(rd->totlen)))) { - JFFS2_WARNING("inode node header CRC is corrupted at %#08x\n", ref_offset(ref)); - jffs2_dbg_dump_node(c, ref_offset(ref)); - jffs2_mark_node_obsolete(c, ref); + JFFS2_WARNING("inode node header CRC is corrupted at %#08x\n", ref_offset(ref)); + jffs2_dbg_dump_node(c, ref_offset(ref)); goto free_out; } @@ -773,7 +775,6 @@ static inline int read_dnode(struct jffs2_sb_info *c, struct jffs2_raw_node_ref if (len >= csize && unlikely(tn->partial_crc != je32_to_cpu(rd->data_crc))) { JFFS2_NOTICE("wrong data CRC in data node at 0x%08x: read %#08x, calculated %#08x.\n", ref_offset(ref), tn->partial_crc, je32_to_cpu(rd->data_crc)); - jffs2_mark_node_obsolete(c, ref); goto free_out; } @@ -853,6 +854,7 @@ static inline int read_dnode(struct jffs2_sb_info *c, struct jffs2_raw_node_ref * It is called every time an unknown node is found. * * Returns: 0 on success; + * 1 if the node should be marked obsolete; * negative error code on failure. */ static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref, struct jffs2_unknown_node *un) @@ -1086,7 +1088,10 @@ static int jffs2_get_inode_nodes(struct jffs2_sb_info *c, struct jffs2_inode_inf } err = read_unknown(c, ref, &node->u); - if (unlikely(err)) + if (err == 1) { + jffs2_mark_node_obsolete(c, ref); + break; + } else if (unlikely(err)) goto free_out; } diff --git a/trunk/include/asm-blackfin/macros.h b/trunk/include/asm-blackfin/macros.h new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/trunk/include/asm-blackfin/processor.h b/trunk/include/asm-blackfin/processor.h index 6bb3e0d4705d..aba2b30a8ed8 100644 --- a/trunk/include/asm-blackfin/processor.h +++ b/trunk/include/asm-blackfin/processor.h @@ -124,10 +124,6 @@ static inline __attribute_pure__ uint32_t bfin_compiled_revid(void) return 4; #elif defined(CONFIG_BF_REV_0_5) return 5; -#elif defined(CONFIG_BF_REV_ANY) - return 0xffff; -#else - return -1; #endif } diff --git a/trunk/include/asm-mips/mach-ip32/dma-coherence.h b/trunk/include/asm-mips/mach-ip32/dma-coherence.h index a5511ebb2d53..c3f9a6a20eb0 100644 --- a/trunk/include/asm-mips/mach-ip32/dma-coherence.h +++ b/trunk/include/asm-mips/mach-ip32/dma-coherence.h @@ -6,8 +6,8 @@ * Copyright (C) 2006 Ralf Baechle * */ -#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H -#define __ASM_MACH_IP32_DMA_COHERENCE_H +#ifndef __ASM_MACH_IP35_DMA_COHERENCE_H +#define __ASM_MACH_IP35_DMA_COHERENCE_H #include @@ -69,4 +69,4 @@ static inline int plat_device_is_coherent(struct device *dev) return 0; /* IP32 is non-cohernet */ } -#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */ +#endif /* __ASM_MACH_IP35_DMA_COHERENCE_H */ diff --git a/trunk/include/asm-mips/ptrace.h b/trunk/include/asm-mips/ptrace.h index 85b44366343a..1906938285c0 100644 --- a/trunk/include/asm-mips/ptrace.h +++ b/trunk/include/asm-mips/ptrace.h @@ -86,7 +86,7 @@ struct pt_regs { extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); -extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET; +extern NORET_TYPE void die(const char *, struct pt_regs *); static inline void die_if_kernel(const char *str, struct pt_regs *regs) { diff --git a/trunk/include/asm-mips/unistd.h b/trunk/include/asm-mips/unistd.h index ed16de0a6398..59d6fec8fbff 100644 --- a/trunk/include/asm-mips/unistd.h +++ b/trunk/include/asm-mips/unistd.h @@ -977,22 +977,6 @@ # define __ARCH_WANT_COMPAT_SYS_TIME # endif -/* whitelists for checksyscalls */ -#define __IGNORE_select -#define __IGNORE_vfork -#define __IGNORE_time -#define __IGNORE_uselib -#define __IGNORE_fadvise64_64 -#define __IGNORE_getdents64 -#if _MIPS_SIM == _MIPS_SIM_NABI32 -#define __IGNORE_truncate64 -#define __IGNORE_ftruncate64 -#define __IGNORE_stat64 -#define __IGNORE_lstat64 -#define __IGNORE_fstat64 -#define __IGNORE_fstatat64 -#endif - #endif /* !__ASSEMBLY__ */ /* diff --git a/trunk/include/asm-powerpc/irq.h b/trunk/include/asm-powerpc/irq.h index 05dd5a3eb3aa..4734cc178db5 100644 --- a/trunk/include/asm-powerpc/irq.h +++ b/trunk/include/asm-powerpc/irq.h @@ -138,7 +138,10 @@ struct irq_map_entry { extern struct irq_map_entry irq_map[NR_IRQS]; -extern irq_hw_number_t virq_to_hw(unsigned int virq); +static inline irq_hw_number_t virq_to_hw(unsigned int virq) +{ + return irq_map[virq].hwirq; +} /** * irq_alloc_host - Allocate a new irq_host data structure diff --git a/trunk/include/linux/input.h b/trunk/include/linux/input.h index d8521c72f69f..be2bf3a2b031 100644 --- a/trunk/include/linux/input.h +++ b/trunk/include/linux/input.h @@ -108,13 +108,6 @@ struct input_absinfo { /* * Keys and buttons - * - * Most of the keys/buttons are modeled after USB HUT 1.12 - * (see http://www.usb.org/developers/hidpage). - * Abbreviations in the comments: - * AC - Application Control - * AL - Application Launch Button - * SC - System Control */ #define KEY_RESERVED 0 @@ -233,7 +226,7 @@ struct input_absinfo { #define KEY_MUTE 113 #define KEY_VOLUMEDOWN 114 #define KEY_VOLUMEUP 115 -#define KEY_POWER 116 /* SC System Power Down */ +#define KEY_POWER 116 #define KEY_KPEQUAL 117 #define KEY_KPPLUSMINUS 118 #define KEY_PAUSE 119 @@ -247,39 +240,38 @@ struct input_absinfo { #define KEY_RIGHTMETA 126 #define KEY_COMPOSE 127 -#define KEY_STOP 128 /* AC Stop */ +#define KEY_STOP 128 #define KEY_AGAIN 129 -#define KEY_PROPS 130 /* AC Properties */ -#define KEY_UNDO 131 /* AC Undo */ +#define KEY_PROPS 130 +#define KEY_UNDO 131 #define KEY_FRONT 132 -#define KEY_COPY 133 /* AC Copy */ -#define KEY_OPEN 134 /* AC Open */ -#define KEY_PASTE 135 /* AC Paste */ -#define KEY_FIND 136 /* AC Search */ -#define KEY_CUT 137 /* AC Cut */ -#define KEY_HELP 138 /* AL Integrated Help Center */ -#define KEY_MENU 139 /* Menu (show menu) */ -#define KEY_CALC 140 /* AL Calculator */ +#define KEY_COPY 133 +#define KEY_OPEN 134 +#define KEY_PASTE 135 +#define KEY_FIND 136 +#define KEY_CUT 137 +#define KEY_HELP 138 +#define KEY_MENU 139 +#define KEY_CALC 140 #define KEY_SETUP 141 -#define KEY_SLEEP 142 /* SC System Sleep */ -#define KEY_WAKEUP 143 /* System Wake Up */ -#define KEY_FILE 144 /* AL Local Machine Browser */ +#define KEY_SLEEP 142 +#define KEY_WAKEUP 143 +#define KEY_FILE 144 #define KEY_SENDFILE 145 #define KEY_DELETEFILE 146 #define KEY_XFER 147 #define KEY_PROG1 148 #define KEY_PROG2 149 -#define KEY_WWW 150 /* AL Internet Browser */ +#define KEY_WWW 150 #define KEY_MSDOS 151 -#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ -#define KEY_SCREENLOCK KEY_COFFEE +#define KEY_COFFEE 152 #define KEY_DIRECTION 153 #define KEY_CYCLEWINDOWS 154 #define KEY_MAIL 155 -#define KEY_BOOKMARKS 156 /* AC Bookmarks */ +#define KEY_BOOKMARKS 156 #define KEY_COMPUTER 157 -#define KEY_BACK 158 /* AC Back */ -#define KEY_FORWARD 159 /* AC Forward */ +#define KEY_BACK 158 +#define KEY_FORWARD 159 #define KEY_CLOSECD 160 #define KEY_EJECTCD 161 #define KEY_EJECTCLOSECD 162 @@ -289,20 +281,20 @@ struct input_absinfo { #define KEY_STOPCD 166 #define KEY_RECORD 167 #define KEY_REWIND 168 -#define KEY_PHONE 169 /* Media Select Telephone */ +#define KEY_PHONE 169 #define KEY_ISO 170 -#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ -#define KEY_HOMEPAGE 172 /* AC Home */ -#define KEY_REFRESH 173 /* AC Refresh */ -#define KEY_EXIT 174 /* AC Exit */ +#define KEY_CONFIG 171 +#define KEY_HOMEPAGE 172 +#define KEY_REFRESH 173 +#define KEY_EXIT 174 #define KEY_MOVE 175 #define KEY_EDIT 176 #define KEY_SCROLLUP 177 #define KEY_SCROLLDOWN 178 #define KEY_KPLEFTPAREN 179 #define KEY_KPRIGHTPAREN 180 -#define KEY_NEW 181 /* AC New */ -#define KEY_REDO 182 /* AC Redo/Repeat */ +#define KEY_NEW 181 +#define KEY_REDO 182 #define KEY_F13 183 #define KEY_F14 184 @@ -322,11 +314,11 @@ struct input_absinfo { #define KEY_PROG3 202 #define KEY_PROG4 203 #define KEY_SUSPEND 205 -#define KEY_CLOSE 206 /* AC Close */ +#define KEY_CLOSE 206 #define KEY_PLAY 207 #define KEY_FASTFORWARD 208 #define KEY_BASSBOOST 209 -#define KEY_PRINT 210 /* AC Print */ +#define KEY_PRINT 210 #define KEY_HP 211 #define KEY_CAMERA 212 #define KEY_SOUND 213 @@ -335,11 +327,11 @@ struct input_absinfo { #define KEY_CHAT 216 #define KEY_SEARCH 217 #define KEY_CONNECT 218 -#define KEY_FINANCE 219 /* AL Checkbook/Finance */ +#define KEY_FINANCE 219 #define KEY_SPORT 220 #define KEY_SHOP 221 #define KEY_ALTERASE 222 -#define KEY_CANCEL 223 /* AC Cancel */ +#define KEY_CANCEL 223 #define KEY_BRIGHTNESSDOWN 224 #define KEY_BRIGHTNESSUP 225 #define KEY_MEDIA 226 @@ -349,10 +341,10 @@ struct input_absinfo { #define KEY_KBDILLUMDOWN 229 #define KEY_KBDILLUMUP 230 -#define KEY_SEND 231 /* AC Send */ -#define KEY_REPLY 232 /* AC Reply */ -#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ -#define KEY_SAVE 234 /* AC Save */ +#define KEY_SEND 231 +#define KEY_REPLY 232 +#define KEY_FORWARDMAIL 233 +#define KEY_SAVE 234 #define KEY_DOCUMENTS 235 #define KEY_BATTERY 236 @@ -441,15 +433,15 @@ struct input_absinfo { #define KEY_CLEAR 0x163 #define KEY_POWER2 0x164 #define KEY_OPTION 0x165 -#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ +#define KEY_INFO 0x166 #define KEY_TIME 0x167 #define KEY_VENDOR 0x168 #define KEY_ARCHIVE 0x169 -#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ +#define KEY_PROGRAM 0x16a #define KEY_CHANNEL 0x16b #define KEY_FAVORITES 0x16c #define KEY_EPG 0x16d -#define KEY_PVR 0x16e /* Media Select Home */ +#define KEY_PVR 0x16e #define KEY_MHP 0x16f #define KEY_LANGUAGE 0x170 #define KEY_TITLE 0x171 @@ -459,36 +451,36 @@ struct input_absinfo { #define KEY_MODE 0x175 #define KEY_KEYBOARD 0x176 #define KEY_SCREEN 0x177 -#define KEY_PC 0x178 /* Media Select Computer */ -#define KEY_TV 0x179 /* Media Select TV */ -#define KEY_TV2 0x17a /* Media Select Cable */ -#define KEY_VCR 0x17b /* Media Select VCR */ -#define KEY_VCR2 0x17c /* VCR Plus */ -#define KEY_SAT 0x17d /* Media Select Satellite */ +#define KEY_PC 0x178 +#define KEY_TV 0x179 +#define KEY_TV2 0x17a +#define KEY_VCR 0x17b +#define KEY_VCR2 0x17c +#define KEY_SAT 0x17d #define KEY_SAT2 0x17e -#define KEY_CD 0x17f /* Media Select CD */ -#define KEY_TAPE 0x180 /* Media Select Tape */ +#define KEY_CD 0x17f +#define KEY_TAPE 0x180 #define KEY_RADIO 0x181 -#define KEY_TUNER 0x182 /* Media Select Tuner */ +#define KEY_TUNER 0x182 #define KEY_PLAYER 0x183 #define KEY_TEXT 0x184 -#define KEY_DVD 0x185 /* Media Select DVD */ +#define KEY_DVD 0x185 #define KEY_AUX 0x186 #define KEY_MP3 0x187 #define KEY_AUDIO 0x188 #define KEY_VIDEO 0x189 #define KEY_DIRECTORY 0x18a #define KEY_LIST 0x18b -#define KEY_MEMO 0x18c /* Media Select Messages */ +#define KEY_MEMO 0x18c #define KEY_CALENDAR 0x18d #define KEY_RED 0x18e #define KEY_GREEN 0x18f #define KEY_YELLOW 0x190 #define KEY_BLUE 0x191 -#define KEY_CHANNELUP 0x192 /* Channel Increment */ -#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ +#define KEY_CHANNELUP 0x192 +#define KEY_CHANNELDOWN 0x193 #define KEY_FIRST 0x194 -#define KEY_LAST 0x195 /* Recall Last */ +#define KEY_LAST 0x195 #define KEY_AB 0x196 #define KEY_NEXT 0x197 #define KEY_RESTART 0x198 @@ -499,21 +491,21 @@ struct input_absinfo { #define KEY_DIGITS 0x19d #define KEY_TEEN 0x19e #define KEY_TWEN 0x19f -#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ -#define KEY_GAMES 0x1a1 /* Media Select Games */ -#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ -#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ -#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ -#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ -#define KEY_EDITOR 0x1a6 /* AL Text Editor */ -#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ -#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ -#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ -#define KEY_DATABASE 0x1aa /* AL Database App */ -#define KEY_NEWS 0x1ab /* AL Newsreader */ -#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ -#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ -#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ +#define KEY_VIDEOPHONE 0x1a0 +#define KEY_GAMES 0x1a1 +#define KEY_ZOOMIN 0x1a2 +#define KEY_ZOOMOUT 0x1a3 +#define KEY_ZOOMRESET 0x1a4 +#define KEY_WORDPROCESSOR 0x1a5 +#define KEY_EDITOR 0x1a6 +#define KEY_SPREADSHEET 0x1a7 +#define KEY_GRAPHICSEDITOR 0x1a8 +#define KEY_PRESENTATION 0x1a9 +#define KEY_DATABASE 0x1aa +#define KEY_NEWS 0x1ab +#define KEY_VOICEMAIL 0x1ac +#define KEY_ADDRESSBOOK 0x1ad +#define KEY_MESSENGER 0x1ae #define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ #define KEY_DEL_EOL 0x1c0 @@ -611,7 +603,6 @@ struct input_absinfo { #define SW_LID 0x00 /* set = lid shut */ #define SW_TABLET_MODE 0x01 /* set = tablet mode */ #define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ -#define SW_RADIO 0x03 /* set = radio enabled */ #define SW_MAX 0x0f /* diff --git a/trunk/kernel/time/ntp.c b/trunk/kernel/time/ntp.c index cf53bb5814cb..87aa5ff931e0 100644 --- a/trunk/kernel/time/ntp.c +++ b/trunk/kernel/time/ntp.c @@ -122,6 +122,7 @@ void second_overflow(void) */ time_interpolator_update(-NSEC_PER_SEC); time_state = TIME_OOP; + clock_was_set(); printk(KERN_NOTICE "Clock: inserting leap second " "23:59:60 UTC\n"); } @@ -136,6 +137,7 @@ void second_overflow(void) */ time_interpolator_update(NSEC_PER_SEC); time_state = TIME_WAIT; + clock_was_set(); printk(KERN_NOTICE "Clock: deleting leap second " "23:59:59 UTC\n"); } diff --git a/trunk/mm/slab.c b/trunk/mm/slab.c index b344e6707128..a9c4472e9204 100644 --- a/trunk/mm/slab.c +++ b/trunk/mm/slab.c @@ -137,7 +137,6 @@ /* Shouldn't this be in a header file somewhere? */ #define BYTES_PER_WORD sizeof(void *) -#define REDZONE_ALIGN max(BYTES_PER_WORD, __alignof__(unsigned long long)) #ifndef cache_line_size #define cache_line_size() L1_CACHE_BYTES @@ -548,7 +547,7 @@ static unsigned long long *dbg_redzone2(struct kmem_cache *cachep, void *objp) if (cachep->flags & SLAB_STORE_USER) return (unsigned long long *)(objp + cachep->buffer_size - sizeof(unsigned long long) - - REDZONE_ALIGN); + BYTES_PER_WORD); return (unsigned long long *) (objp + cachep->buffer_size - sizeof(unsigned long long)); } @@ -2179,8 +2178,7 @@ kmem_cache_create (const char *name, size_t size, size_t align, * above the next power of two: caches with object sizes just above a * power of two have a significant amount of internal fragmentation. */ - if (size < 4096 || fls(size - 1) == fls(size-1 + REDZONE_ALIGN + - 2 * sizeof(unsigned long long))) + if (size < 4096 || fls(size - 1) == fls(size-1 + 3 * BYTES_PER_WORD)) flags |= SLAB_RED_ZONE | SLAB_STORE_USER; if (!(flags & SLAB_DESTROY_BY_RCU)) flags |= SLAB_POISON; @@ -2221,20 +2219,12 @@ kmem_cache_create (const char *name, size_t size, size_t align, } /* - * Redzoning and user store require word alignment or possibly larger. - * Note this will be overridden by architecture or caller mandated - * alignment if either is greater than BYTES_PER_WORD. + * Redzoning and user store require word alignment. Note this will be + * overridden by architecture or caller mandated alignment if either + * is greater than BYTES_PER_WORD. */ - if (flags & SLAB_STORE_USER) - ralign = BYTES_PER_WORD; - - if (flags & SLAB_RED_ZONE) { - ralign = REDZONE_ALIGN; - /* If redzoning, ensure that the second redzone is suitably - * aligned, by adjusting the object size accordingly. */ - size += REDZONE_ALIGN - 1; - size &= ~(REDZONE_ALIGN - 1); - } + if (flags & SLAB_RED_ZONE || flags & SLAB_STORE_USER) + ralign = __alignof__(unsigned long long); /* 2) arch mandated alignment */ if (ralign < ARCH_SLAB_MINALIGN) { @@ -2271,13 +2261,9 @@ kmem_cache_create (const char *name, size_t size, size_t align, } if (flags & SLAB_STORE_USER) { /* user store requires one word storage behind the end of - * the real object. But if the second red zone needs to be - * aligned to 64 bits, we must allow that much space. + * the real object. */ - if (flags & SLAB_RED_ZONE) - size += REDZONE_ALIGN; - else - size += BYTES_PER_WORD; + size += BYTES_PER_WORD; } #if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC) if (size >= malloc_sizes[INDEX_L3 + 1].cs_size diff --git a/trunk/mm/slub.c b/trunk/mm/slub.c index 0437f2f09986..202049a45764 100644 --- a/trunk/mm/slub.c +++ b/trunk/mm/slub.c @@ -1798,6 +1798,8 @@ static struct kmem_cache_node * __init early_kmem_cache_node_alloc(gfp_t gfpflag BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node)); page = new_slab(kmalloc_caches, gfpflags | GFP_THISNODE, node); + /* new_slab() disables interupts */ + local_irq_enable(); BUG_ON(!page); n = page->freelist; @@ -1809,12 +1811,6 @@ static struct kmem_cache_node * __init early_kmem_cache_node_alloc(gfp_t gfpflag init_kmem_cache_node(n); atomic_long_inc(&n->nr_slabs); add_partial(n, page); - - /* - * new_slab() disables interupts. If we do not reenable interrupts here - * then bootup would continue with interrupts disabled. - */ - local_irq_enable(); return n; }